diff options
63 files changed, 1408 insertions, 148 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 0cf2602..6041936 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -128,6 +128,12 @@ T: git git://git.denx.de/u-boot-stm.git F: arch/arm/cpu/arm926ejs/spear/ F: arch/arm/include/asm/arch-spear/ +ARM STM STV0991 +M: Vikas Manocha <vikas.manocha@st.com> +S: Maintained +F: arch/arm/cpu/armv7/stv0991/ +F: arch/arm/include/asm/arch-stv0991/ + ARM SUNXI M: Ian Campbell <ijc@hellion.org.uk> M: Hans De Goede <hdegoede@redhat.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c026dec..2b0d2c9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -341,6 +341,10 @@ config TARGET_SPEAR600 bool "Support spear600" select CPU_ARM926EJS +config TARGET_STV0991 + bool "Support stv0991" + select CPU_V7 + config TARGET_X600 bool "Support x600" select CPU_ARM926EJS @@ -650,6 +654,7 @@ config TARGET_KOSAGI_NOVENA config TARGET_TBS2910 bool "Support tbs2910" + select CPU_V7 config TARGET_TQMA6 bool "TQ Systems TQMa6 board" @@ -955,6 +960,7 @@ source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st-ericsson/snowball/Kconfig" source "board/st-ericsson/u8500/Kconfig" +source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" source "board/syteco/jadecpu/Kconfig" source "board/syteco/zmx25/Kconfig" diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index e419716..409e6f5 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_OMAP54XX) += omap5/ obj-$(CONFIG_RMOBILE) += rmobile/ obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/ obj-$(CONFIG_SOCFPGA) += socfpga/ +obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_U8500) += u8500/ diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index ab7ac3d..93a02ad 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -443,7 +443,7 @@ int enable_fec_anatop_clock(enum enet_freq freq) struct anatop_regs __iomem *anatop = (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; - if (freq < ENET_25MHz || freq > ENET_125MHz) + if (freq < ENET_25MHZ || freq > ENET_125MHZ) return -EINVAL; reg = readl(&anatop->pll_enet); diff --git a/arch/arm/cpu/armv7/stv0991/Makefile b/arch/arm/cpu/armv7/stv0991/Makefile new file mode 100644 index 0000000..95641d3 --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2014 +# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := timer.o clock.o pinmux.o reset.o +obj-y += lowlevel.o diff --git a/arch/arm/cpu/armv7/stv0991/clock.c b/arch/arm/cpu/armv7/stv0991/clock.c new file mode 100644 index 0000000..70b8a8d --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/clock.c @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/stv0991_cgu.h> +#include<asm/arch/stv0991_periph.h> + +static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ + (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); + +void enable_pll1(void) +{ + /* pll1 already configured for 1000Mhz, just need to enable it */ + writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01), + &stv0991_cgu_regs->pll1_ctrl); +} + +void clock_setup(int peripheral) +{ + switch (peripheral) { + case UART_CLOCK_CFG: + writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq); + break; + case ETH_CLOCK_CFG: + enable_pll1(); + writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq); + + /* Clock selection for ethernet tx_clk & rx_clk*/ + writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK) + | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl); + + break; + default: + break; + } +} diff --git a/arch/arm/cpu/armv7/stv0991/lowlevel.S b/arch/arm/cpu/armv7/stv0991/lowlevel.S new file mode 100644 index 0000000..6dafba3 --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/lowlevel.S @@ -0,0 +1,12 @@ +/* + * (C) Copyright 2014 stmicroelectronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + mov pc, lr +ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/stv0991/pinmux.c b/arch/arm/cpu/armv7/stv0991/pinmux.c new file mode 100644 index 0000000..1d086a2 --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/pinmux.c @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/io.h> +#include <asm/arch/stv0991_creg.h> +#include <asm/arch/stv0991_periph.h> +#include <asm/arch/hardware.h> + +static struct stv0991_creg *const stv0991_creg = \ + (struct stv0991_creg *)CREG_BASE_ADDR; + +int stv0991_pinmux_config(int peripheral) +{ + switch (peripheral) { + case UART_GPIOC_30_31: + /* SSDA/SSCL pad muxing to UART Rx/Dx */ + writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) | + CFG_GPIOC_31_UART_RX, + &stv0991_creg->mux12); + writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) | + CFG_GPIOC_30_UART_TX, + &stv0991_creg->mux12); + /* SSDA/SSCL pad config to push pull*/ + writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) | + CFG_GPIOC_31_MODE_PP, + &stv0991_creg->cfg_pad6); + writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) | + CFG_GPIOC_30_MODE_HIGH, + &stv0991_creg->cfg_pad6); + break; + case UART_GPIOB_16_17: + /* ethernet rx_6/7 to UART Rx/Dx */ + writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) | + CFG_GPIOB_17_UART_RX, + &stv0991_creg->mux7); + writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) | + CFG_GPIOB_16_UART_TX, + &stv0991_creg->mux7); + break; + case ETH_GPIOB_10_31_C_0_4: + writel(readl(&stv0991_creg->mux6) & 0x000000FF, + &stv0991_creg->mux6); + writel(0x00000000, &stv0991_creg->mux7); + writel(0x00000000, &stv0991_creg->mux8); + writel(readl(&stv0991_creg->mux9) & 0xFFF00000, + &stv0991_creg->mux9); + /* Ethernet Voltage configuration to 1.8V*/ + writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | + ETH_VDD_CFG, &stv0991_creg->vdd_pad1); + writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) | + ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1); + + break; + default: + break; + } + return 0; +} diff --git a/arch/arm/cpu/armv7/stv0991/reset.c b/arch/arm/cpu/armv7/stv0991/reset.c new file mode 100644 index 0000000..3384b32 --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/reset.c @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/stv0991_wdru.h> +void reset_cpu(ulong ignored) +{ + puts("System is going to reboot ...\n"); + /* + * This 1 second delay will allow the above message + * to be printed before reset + */ + udelay((1000 * 1000)); + + /* Setting bit 1 of the WDRU unit will reset the SoC */ + writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1); + + /* system will restart */ + while (1) + ; +} diff --git a/arch/arm/cpu/armv7/stv0991/timer.c b/arch/arm/cpu/armv7/stv0991/timer.c new file mode 100644 index 0000000..8654b8b --- /dev/null +++ b/arch/arm/cpu/armv7/stv0991/timer.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch-stv0991/hardware.h> +#include <asm/arch-stv0991/stv0991_cgu.h> +#include <asm/arch-stv0991/stv0991_gpt.h> + +static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ + (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); + +#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING) +#define GPT_RESOLUTION (CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ) + +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->arch.tbl +#define lastdec gd->arch.lastinc + +int timer_init(void) +{ + /* Timer1 clock configuration */ + writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq); + writel(readl(&stv0991_cgu_regs->cgu_enable_2) | + TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2); + + /* Stop the timer */ + writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1); + writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc); + /* Configure timer for auto-reload */ + writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD, + &gpt1_regs_ptr->cr1); + + /* load value for free running */ + writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr); + + /* start timer */ + writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, + &gpt1_regs_ptr->cr1); + + /* Reset the timer */ + lastdec = READ_TIMER(); + timestamp = 0; + + return 0; +} + +/* + * timer without interrupts + */ +ulong get_timer(ulong base) +{ + return (get_timer_masked() / GPT_RESOLUTION) - base; +} + +void __udelay(unsigned long usec) +{ + ulong tmo; + ulong start = get_timer_masked(); + ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100); + ulong rndoff; + + rndoff = (usec % 10) ? 1 : 0; + + /* tenudelcnt timer tick gives 10 microsecconds delay */ + tmo = ((usec / 10) + rndoff) * tenudelcnt; + + while ((ulong) (get_timer_masked() - start) < tmo) + ; +} + +ulong get_timer_masked(void) +{ + ulong now = READ_TIMER(); + + if (now >= lastdec) { + /* normal mode */ + timestamp += now - lastdec; + } else { + /* we have an overflow ... */ + timestamp += now + GPT_FREE_RUNNING - lastdec; + } + lastdec = now; + + return timestamp; +} + +void udelay_masked(unsigned long usec) +{ + return udelay(usec); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_STV0991_HZ; +} diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c index a26d63e..92aaad9 100644 --- a/arch/arm/cpu/armv7/vf610/generic.c +++ b/arch/arm/cpu/armv7/vf610/generic.c @@ -265,20 +265,21 @@ static char *get_reset_cause(void) cause = readl(&src_regs->srsr); writel(cause, &src_regs->srsr); - cause &= 0xff; - switch (cause) { - case 0x08: - return "WDOG"; - case 0x20: + if (cause & SRC_SRSR_POR_RST) + return "POWER ON RESET"; + else if (cause & SRC_SRSR_WDOG_A5) + return "WDOG A5"; + else if (cause & SRC_SRSR_WDOG_M4) + return "WDOG M4"; + else if (cause & SRC_SRSR_JTAG_RST) return "JTAG HIGH-Z"; - case 0x80: + else if (cause & SRC_SRSR_SW_RST) + return "SW RESET"; + else if (cause & SRC_SRSR_RESETB) return "EXTERNAL RESET"; - case 0xfd: - return "POR"; - default: + else return "unknown reset"; - } } int print_cpuinfo(void) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index b58df7d..28ccd29 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -206,6 +206,9 @@ void arch_preboot_os(void) { #if defined(CONFIG_CMD_SATA) sata_stop(); +#if defined(CONFIG_MX6) + disable_sata_clock(); +#endif #endif #if defined(CONFIG_VIDEO_IPUV3) /* disable video before launching O/S */ diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 323805c..226a4cd 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -43,10 +43,10 @@ enum mxc_clock { }; enum enet_freq { - ENET_25MHz, - ENET_50MHz, - ENET_100MHz, - ENET_125MHz, + ENET_25MHZ, + ENET_50MHZ, + ENET_100MHZ, + ENET_125MHZ, }; u32 imx_get_uartclk(void); diff --git a/arch/arm/include/asm/arch-rmobile/mmc.h b/arch/arm/include/asm/arch-rmobile/mmc.h new file mode 100644 index 0000000..4e0fef1 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/mmc.h @@ -0,0 +1,14 @@ +/* + * Renesas SuperH MMCIF driver. + * + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef _RMOBILE_MMC_H_ +#define _RMOBILE_MMC_H_ + +int mmcif_mmc_init(void); + +#endif /* _RMOBILE_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h index de14869..132d58c 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7790.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h @@ -15,6 +15,19 @@ #define CONFIG_SYS_I2C_SH_BASE2 0xE6520000 #define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000 +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00640801 +#define MSTP1_BITS 0xDB6E9BDF +#define MSTP2_BITS 0x300DA1FC +#define MSTP3_BITS 0xF08CF831 +#define MSTP4_BITS 0x80000184 +#define MSTP5_BITS 0x44C00046 +#define MSTP7_BITS 0x07F30718 +#define MSTP8_BITS 0x01F0FF84 +#define MSTP9_BITS 0xF5979FCF +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x00000000 + #define R8A7790_CUT_ES2X 2 #define IS_R8A7790_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h index 26a0bd5..d2cbcd7 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7791.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h @@ -51,6 +51,19 @@ #define DBSC3_1_QOS_W15_BASE 0xE67A2F00 #define DBSC3_1_DBADJ2 0xE67A00C8 +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00640801 +#define MSTP1_BITS 0x9B6C9B5A +#define MSTP2_BITS 0x100D21FC +#define MSTP3_BITS 0xF08CD810 +#define MSTP4_BITS 0x800001C4 +#define MSTP5_BITS 0x44C00046 +#define MSTP7_BITS 0x05BFE618 +#define MSTP8_BITS 0x40C0FE85 +#define MSTP9_BITS 0xFF979FFF +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x000001C0 + #define R8A7791_CUT_ES2X 2 #define IS_R8A7791_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7793.h b/arch/arm/include/asm/arch-rmobile/r8a7793.h index 778812e..1abdeb7 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7793.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7793.h @@ -56,6 +56,20 @@ /* * R8A7793 I/O Product Information */ + +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00640801 +#define MSTP1_BITS 0x9B6C9B5A +#define MSTP2_BITS 0x100D21FC +#define MSTP3_BITS 0xF08CD810 +#define MSTP4_BITS 0x800001C4 +#define MSTP5_BITS 0x44C00046 +#define MSTP7_BITS 0x05BFE618 +#define MSTP8_BITS 0x40C0FE85 +#define MSTP9_BITS 0xFF979FFF +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x000001C0 + #define R8A7793_CUT_ES2X 2 #define IS_R8A7793_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7794.h b/arch/arm/include/asm/arch-rmobile/r8a7794.h index 66d5a29..d7c9004 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7794.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7794.h @@ -14,4 +14,17 @@ /* SH-I2C */ #define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00440801 +#define MSTP1_BITS 0x936899DA +#define MSTP2_BITS 0x100D21FC +#define MSTP3_BITS 0xE084D810 +#define MSTP4_BITS 0x800001C4 +#define MSTP5_BITS 0x40C00044 +#define MSTP7_BITS 0x013FE618 +#define MSTP8_BITS 0x40803C05 +#define MSTP9_BITS 0xFB879FEE +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x000001C0 + #endif /* __ASM_ARCH_R8A7794_H */ diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h index dbbebcf..23c4bba 100644 --- a/arch/arm/include/asm/arch-rmobile/rcar-base.h +++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h @@ -29,6 +29,45 @@ #define SCIF4_BASE 0xE6EE0000 #define SCIF5_BASE 0xE6EE8000 +/* Module stop status register */ +#define MSTPSR0 0xE6150030 +#define MSTPSR1 0xE6150038 +#define MSTPSR2 0xE6150040 +#define MSTPSR3 0xE6150048 +#define MSTPSR4 0xE615004C +#define MSTPSR5 0xE615003C +#define MSTPSR7 0xE61501C4 +#define MSTPSR8 0xE61509A0 +#define MSTPSR9 0xE61509A4 +#define MSTPSR10 0xE61509A8 +#define MSTPSR11 0xE61509AC + +/* Realtime module stop control register */ +#define RMSTPCR0 0xE6150110 +#define RMSTPCR1 0xE6150114 +#define RMSTPCR2 0xE6150118 +#define RMSTPCR3 0xE615011C +#define RMSTPCR4 0xE6150120 +#define RMSTPCR5 0xE6150124 +#define RMSTPCR7 0xE615012C +#define RMSTPCR8 0xE6150980 +#define RMSTPCR9 0xE6150984 +#define RMSTPCR10 0xE6150988 +#define RMSTPCR11 0xE615098C + +/* System module stop control register */ +#define SMSTPCR0 0xE6150130 +#define SMSTPCR1 0xE6150134 +#define SMSTPCR2 0xE6150138 +#define SMSTPCR3 0xE615013C +#define SMSTPCR4 0xE6150140 +#define SMSTPCR5 0xE6150144 +#define SMSTPCR7 0xE615014C +#define SMSTPCR8 0xE6150990 +#define SMSTPCR9 0xE6150994 +#define SMSTPCR10 0xE6150998 +#define SMSTPCR11 0xE615099C + /* * SH-I2C * Ch2 and ch3 are different address. These are defined diff --git a/arch/arm/include/asm/arch-rmobile/rcar-mstp.h b/arch/arm/include/asm/arch-rmobile/rcar-mstp.h new file mode 100644 index 0000000..9a564f8 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/rcar-mstp.h @@ -0,0 +1,109 @@ +/* + * arch/arm/include/asm/arch-rmobile/rcar-mstp.h + * + * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2013, 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_ARCH_RCAR_MSTP_H +#define __ASM_ARCH_RCAR_MSTP_H + +#define mstp_setbits(type, addr, saddr, set) \ + out_##type((saddr), in_##type(addr) | (set)) +#define mstp_clrbits(type, addr, saddr, clear) \ + out_##type((saddr), in_##type(addr) & ~(clear)) +#define mstp_setclrbits(type, addr, set, clear) \ + out_##type((addr), (in_##type(addr) | (set)) & ~(clear)) +#define mstp_setbits_le32(addr, saddr, set) \ + mstp_setbits(le32, addr, saddr, set) +#define mstp_clrbits_le32(addr, saddr, clear) \ + mstp_clrbits(le32, addr, saddr, clear) +#define mstp_setclrbits_le32(addr, set, clear) \ + mstp_setclrbits(le32, addr, set, clear) + +#ifndef CONFIG_SMSTP0_ENA +#define CONFIG_SMSTP0_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP1_ENA +#define CONFIG_SMSTP1_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP2_ENA +#define CONFIG_SMSTP2_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP3_ENA +#define CONFIG_SMSTP3_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP4_ENA +#define CONFIG_SMSTP4_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP5_ENA +#define CONFIG_SMSTP5_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP6_ENA +#define CONFIG_SMSTP6_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP7_ENA +#define CONFIG_SMSTP7_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP8_ENA +#define CONFIG_SMSTP8_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP9_ENA +#define CONFIG_SMSTP9_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP10_ENA +#define CONFIG_SMSTP10_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP11_ENA +#define CONFIG_SMSTP11_ENA 0x00 +#endif + +#ifndef CONFIG_RMSTP0_ENA +#define CONFIG_RMSTP0_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP1_ENA +#define CONFIG_RMSTP1_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP2_ENA +#define CONFIG_RMSTP2_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP3_ENA +#define CONFIG_RMSTP3_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP4_ENA +#define CONFIG_RMSTP4_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP5_ENA +#define CONFIG_RMSTP5_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP6_ENA +#define CONFIG_RMSTP6_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP7_ENA +#define CONFIG_RMSTP7_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP8_ENA +#define CONFIG_RMSTP8_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP9_ENA +#define CONFIG_RMSTP9_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP10_ENA +#define CONFIG_RMSTP10_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP11_ENA +#define CONFIG_RMSTP11_ENA 0x00 +#endif + +struct mstp_ctl { + u32 s_addr; + u32 s_dis; + u32 s_ena; + u32 r_addr; + u32 r_dis; + u32 r_ena; +}; + +#endif /* __ASM_ARCH_RCAR_MSTP_H */ diff --git a/arch/arm/include/asm/arch-stv0991/gpio.h b/arch/arm/include/asm/arch-stv0991/gpio.h new file mode 100644 index 0000000..9131ded --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/gpio.h @@ -0,0 +1,22 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_STV0991_GPIO_H +#define __ASM_ARCH_STV0991_GPIO_H + +enum gpio_direction { + GPIO_DIRECTION_IN, + GPIO_DIRECTION_OUT, +}; + +struct gpio_regs { + u32 data; /* offset 0x0 */ + u32 reserved[0xff]; /* 0x4--0x3fc */ + u32 dir; /* offset 0x400 */ +}; + +#endif /* __ASM_ARCH_STV0991_GPIO_H */ diff --git a/arch/arm/include/asm/arch-stv0991/hardware.h b/arch/arm/include/asm/arch-stv0991/hardware.h new file mode 100644 index 0000000..3f6bcaf --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/hardware.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_HARDWARE_H +#define _ASM_ARCH_HARDWARE_H + +/* STV0991 */ +#define SRAM0_BASE_ADDR 0x00000000UL +#define SRAM1_BASE_ADDR 0x00068000UL +#define SRAM2_BASE_ADDR 0x000D0000UL +#define SRAM3_BASE_ADDR 0x00138000UL +#define CFS_SRAM0_BASE_ADDR 0x00198000UL +#define CFS_SRAM1_BASE_ADDR 0x001B8000UL +#define FAST_SRAM_BASE_ADDR 0x001D8000UL +#define FLASH_BASE_ADDR 0x40000000UL +#define PL310_BASE_ADDR 0x70000000UL +#define HSAXIM_BASE_ADDR 0x70100000UL +#define IMGSS_BASE_ADDR 0x70200000UL +#define ADC_BASE_ADDR 0x80000000UL +#define GPIOA_BASE_ADDR 0x80001000UL +#define GPIOB_BASE_ADDR 0x80002000UL +#define GPIOC_BASE_ADDR 0x80003000UL +#define HDM_BASE_ADDR 0x80004000UL +#define THSENS_BASE_ADDR 0x80200000UL +#define GPTIMER2_BASE_ADDR 0x80201000UL +#define GPTIMER1_BASE_ADDR 0x80202000UL +#define QSPI_BASE_ADDR 0x80203000UL +#define CGU_BASE_ADDR 0x80204000UL +#define CREG_BASE_ADDR 0x80205000UL +#define PEC_BASE_ADDR 0x80206000UL +#define WDRU_BASE_ADDR 0x80207000UL +#define BSEC_BASE_ADDR 0x80208000UL +#define DAP_ROM_BASE_ADDR 0x80210000UL +#define SOC_CTI_BASE_ADDR 0x80211000UL +#define TPIU_BASE_ADDR 0x80212000UL +#define TMC_ETF_BASE_ADDR 0x80213000UL +#define R4_ETM_BASE_ADDR 0x80214000UL +#define R4_CTI_BASE_ADDR 0x80215000UL +#define R4_DBG_BASE_ADDR 0x80216000UL +#define GMAC_BASE_ADDR 0x80300000UL +#define RNSS_BASE_ADDR 0x80302000UL +#define CRYP_BASE_ADDR 0x80303000UL +#define HASH_BASE_ADDR 0x80304000UL +#define GPDMA_BASE_ADDR 0x80305000UL +#define ISA_BASE_ADDR 0x8032A000UL +#define HCI_BASE_ADDR 0x80400000UL +#define I2C1_BASE_ADDR 0x80401000UL +#define I2C2_BASE_ADDR 0x80402000UL +#define SAI_BASE_ADDR 0x80403000UL +#define USI_BASE_ADDR 0x80404000UL +#define SPI1_BASE_ADDR 0x80405000UL +#define UART_BASE_ADDR 0x80406000UL +#define SPI2_BASE_ADDR 0x80500000UL +#define CAN_BASE_ADDR 0x80501000UL +#define USART1_BASE_ADDR 0x80502000UL +#define USART2_BASE_ADDR 0x80503000UL +#define USART3_BASE_ADDR 0x80504000UL +#define USART4_BASE_ADDR 0x80505000UL +#define USART5_BASE_ADDR 0x80506000UL +#define USART6_BASE_ADDR 0x80507000UL +#define SDI2_BASE_ADDR 0x80600000UL +#define SDI1_BASE_ADDR 0x80601000UL +#define VICA_BASE_ADDR 0x81000000UL +#define VICB_BASE_ADDR 0x81001000UL +#define STM_CHANNELS_BASE_ADDR 0x81100000UL +#define STM_BASE_ADDR 0x81110000UL +#define SROM_BASE_ADDR 0xFFFF0000UL + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h new file mode 100644 index 0000000..ddcbb57 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h @@ -0,0 +1,116 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_CGU_H +#define _STV0991_CGU_H + +struct stv0991_cgu_regs { + u32 cpu_freq; /* offset 0x0 */ + u32 icn2_freq; /* offset 0x4 */ + u32 dma_freq; /* offset 0x8 */ + u32 isp_freq; /* offset 0xc */ + u32 h264_freq; /* offset 0x10 */ + u32 osif_freq; /* offset 0x14 */ + u32 ren_freq; /* offset 0x18 */ + u32 tim_freq; /* offset 0x1c */ + u32 sai_freq; /* offset 0x20 */ + u32 eth_freq; /* offset 0x24 */ + u32 i2c_freq; /* offset 0x28 */ + u32 spi_freq; /* offset 0x2c */ + u32 uart_freq; /* offset 0x30 */ + u32 qspi_freq; /* offset 0x34 */ + u32 sdio_freq; /* offset 0x38 */ + u32 usi_freq; /* offset 0x3c */ + u32 can_line_freq; /* offset 0x40 */ + u32 debug_freq; /* offset 0x44 */ + u32 trace_freq; /* offset 0x48 */ + u32 stm_freq; /* offset 0x4c */ + u32 eth_ctrl; /* offset 0x50 */ + u32 reserved[3]; /* offset 0x54 */ + u32 osc_ctrl; /* offset 0x60 */ + u32 pll1_ctrl; /* offset 0x64 */ + u32 pll1_freq; /* offset 0x68 */ + u32 pll1_fract; /* offset 0x6c */ + u32 pll1_spread; /* offset 0x70 */ + u32 pll1_status; /* offset 0x74 */ + u32 pll2_ctrl; /* offset 0x78 */ + u32 pll2_freq; /* offset 0x7c */ + u32 pll2_fract; /* offset 0x80 */ + u32 pll2_spread; /* offset 0x84 */ + u32 pll2_status; /* offset 0x88 */ + u32 cgu_enable_1; /* offset 0x8c */ + u32 cgu_enable_2; /* offset 0x90 */ + u32 cgu_isp_pulse; /* offset 0x94 */ + u32 cgu_h264_pulse; /* offset 0x98 */ + u32 cgu_osif_pulse; /* offset 0x9c */ + u32 cgu_ren_pulse; /* offset 0xa0 */ + +}; + +/* CGU Timer */ +#define CLK_TMR_OSC 0 +#define CLK_TMR_MCLK 1 +#define CLK_TMR_PLL1 2 +#define CLK_TMR_PLL2 3 +#define MDIV_SHIFT_TMR 3 +#define DIV_SHIFT_TMR 6 + +#define TIMER1_CLK_CFG (0 << DIV_SHIFT_TMR \ + | 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK) + +/* Clock Enable/Disable */ + +#define TIMER1_CLK_EN (1 << 15) + +/* CGU Uart config */ +#define CLK_UART_MCLK 0 +#define CLK_UART_PLL1 1 +#define CLK_UART_PLL2 2 + +#define MDIV_SHIFT_UART 3 +#define DIV_SHIFT_UART 6 + +#define UART_CLK_CFG (4 << DIV_SHIFT_UART \ + | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK) + +/* CGU Ethernet clock config */ +#define CLK_ETH_MCLK 0 +#define CLK_ETH_PLL1 1 +#define CLK_ETH_PLL2 2 + +#define MDIV_SHIFT_ETH 3 +#define DIV_SHIFT_ETH 6 +#define DIV_ETH_125 9 +#define DIV_ETH_50 12 +#define DIV_ETH_P2P 15 + +#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \ + | 1 << DIV_ETH_125 \ + | 0 << DIV_SHIFT_ETH \ + | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1) + /* CGU Ethernet control */ + +#define ETH_CLK_TX_EXT_PHY 0 +#define ETH_CLK_TX_125M 1 +#define ETH_CLK_TX_25M 2 +#define ETH_CLK_TX_2M5 3 +#define ETH_CLK_TX_DIS 7 + +#define ETH_CLK_RX_EXT_PHY 0 +#define ETH_CLK_RX_25M 1 +#define ETH_CLK_RX_2M5 2 +#define ETH_CLK_RX_DIS 3 +#define RX_CLK_SHIFT 3 +#define ETH_CLK_MASK ~(0x1F) + +#define ETH_PHY_MODE_GMII 0 +#define ETH_PHY_MODE_RMII 1 +#define ETH_PHY_CLK_DIS 1 + +#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \ + | ETH_CLK_TX_EXT_PHY) +#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h new file mode 100644 index 0000000..c804eb5 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_CREG_H +#define _STV0991_CREG_H + +struct stv0991_creg { + u32 version; /* offset 0x0 */ + u32 hdpctl; /* offset 0x4 */ + u32 hdpval; /* offset 0x8 */ + u32 hdpgposet; /* offset 0xc */ + u32 hdpgpoclr; /* offset 0x10 */ + u32 hdpgpoval; /* offset 0x14 */ + u32 stm_mux; /* offset 0x18 */ + u32 sysctrl_1; /* offset 0x1c */ + u32 sysctrl_2; /* offset 0x20 */ + u32 sysctrl_3; /* offset 0x24 */ + u32 sysctrl_4; /* offset 0x28 */ + u32 reserved_1[0x35]; /* offset 0x2C-0xFC */ + u32 mux1; /* offset 0x100 */ + u32 mux2; /* offset 0x104 */ + u32 mux3; /* offset 0x108 */ + u32 mux4; /* offset 0x10c */ + u32 mux5; /* offset 0x110 */ + u32 mux6; /* offset 0x114 */ + u32 mux7; /* offset 0x118 */ + u32 mux8; /* offset 0x11c */ + u32 mux9; /* offset 0x120 */ + u32 mux10; /* offset 0x124 */ + u32 mux11; /* offset 0x128 */ + u32 mux12; /* offset 0x12c */ + u32 mux13; /* offset 0x130 */ + u32 reserved_2[0x33]; /* offset 0x134-0x1FC */ + u32 cfg_pad1; /* offset 0x200 */ + u32 cfg_pad2; /* offset 0x204 */ + u32 cfg_pad3; /* offset 0x208 */ + u32 cfg_pad4; /* offset 0x20c */ + u32 cfg_pad5; /* offset 0x210 */ + u32 cfg_pad6; /* offset 0x214 */ + u32 cfg_pad7; /* offset 0x218 */ + u32 reserved_3[0x39]; /* offset 0x21C-0x2FC */ + u32 vdd_pad1; /* offset 0x300 */ + u32 vdd_pad2; /* offset 0x304 */ + u32 reserved_4[0x3e]; /* offset 0x308-0x3FC */ + u32 vdd_comp1; /* offset 0x400 */ +}; + +/* CREG MUX 12 register */ +#define GPIOC_30_MUX_SHIFT 24 +#define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT) +#define CFG_GPIOC_30_UART_TX (1 << GPIOC_30_MUX_SHIFT) + +#define GPIOC_31_MUX_SHIFT 28 +#define GPIOC_31_MUX_MASK ~(1 << GPIOC_31_MUX_SHIFT) +#define CFG_GPIOC_31_UART_RX (1 << GPIOC_31_MUX_SHIFT) + +/* CREG MUX 7 register */ +#define GPIOB_16_MUX_SHIFT 0 +#define GPIOB_16_MUX_MASK ~(1 << GPIOB_16_MUX_SHIFT) +#define CFG_GPIOB_16_UART_TX (1 << GPIOB_16_MUX_SHIFT) + +#define GPIOB_17_MUX_SHIFT 4 +#define GPIOB_17_MUX_MASK ~(1 << GPIOB_17_MUX_SHIFT) +#define CFG_GPIOB_17_UART_RX (1 << GPIOB_17_MUX_SHIFT) + +/* CREG CFG_PAD6 register */ + +#define GPIOC_31_MODE_SHIFT 30 +#define GPIOC_31_MODE_MASK ~(1 << GPIOC_31_MODE_SHIFT) +#define CFG_GPIOC_31_MODE_OD (0 << GPIOC_31_MODE_SHIFT) +#define CFG_GPIOC_31_MODE_PP (1 << GPIOC_31_MODE_SHIFT) + +#define GPIOC_30_MODE_SHIFT 28 +#define GPIOC_30_MODE_MASK ~(1 << GPIOC_30_MODE_SHIFT) +#define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT) +#define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT) + +/* CREG Ethernet pad config */ + +#define VDD_ETH_PS_1V8 0 +#define VDD_ETH_PS_2V5 2 +#define VDD_ETH_PS_3V3 3 +#define VDD_ETH_PS_MASK 0x3 + +#define VDD_ETH_PS_SHIFT 12 +#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT) + +#define VDD_ETH_M_PS_SHIFT 28 +#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT) + +#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_defs.h b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h new file mode 100644 index 0000000..1151378 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __STV0991_DEFS_H__ +#define __STV0991_DEFS_H__ +#include <asm/arch/stv0991_periph.h> + +extern int stv0991_pinmux_config(enum periph_id); +extern int clock_setup(enum periph_clock); + +#endif + diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h new file mode 100644 index 0000000..abd7257 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_GPT_H +#define _STV0991_GPT_H + +#include <asm/arch-stv0991/hardware.h> + +struct gpt_regs { + u32 cr1; + u32 cr2; + u32 reserved_1; + u32 dier; /* dma_int_en */ + u32 sr; /* status reg */ + u32 egr; /* event gen */ + u32 reserved_2[3]; /* offset 0x18--0x20*/ + u32 cnt; + u32 psc; + u32 arr; +}; + +struct gpt_regs *const gpt1_regs_ptr = + (struct gpt_regs *) GPTIMER1_BASE_ADDR; + +/* Timer control1 register */ +#define GPT_CR1_CEN 0x0001 +#define GPT_MODE_AUTO_RELOAD (1 << 7) + +/* Timer prescalar reg */ +#define GPT_PRESCALER_128 0x128 + +/* Auto reload register for free running config */ +#define GPT_FREE_RUNNING 0xFFFF + +/* Timer, HZ specific defines */ +#define CONFIG_STV0991_HZ 1000 +#define CONFIG_STV0991_HZ_CLOCK (27*1000*1000)/GPT_PRESCALER_128 + +#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h new file mode 100644 index 0000000..f728c83 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H + +/* + * Peripherals required for pinmux configuration. List will + * grow with support for more devices getting added. + * Numbering based on interrupt table. + * + */ +enum periph_id { + UART_GPIOC_30_31 = 0, + UART_GPIOB_16_17, + ETH_GPIOB_10_31_C_0_4, + PERIPH_ID_I2C0, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_I2C3, + PERIPH_ID_I2C4, + PERIPH_ID_I2C5, + PERIPH_ID_I2C6, + PERIPH_ID_I2C7, + PERIPH_ID_SPI0, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SDMMC0, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC2, + PERIPH_ID_SDMMC3, + PERIPH_ID_I2S1, +}; + +enum periph_clock { + UART_CLOCK_CFG = 0, + ETH_CLOCK_CFG, +}; + +#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h new file mode 100644 index 0000000..7e555a2 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_WD_RST_H +#define _STV0991_WD_RST_H +#include <asm/arch-stv0991/hardware.h> + +struct stv0991_wd_ru { + u32 wdru_config; + u32 wdru_ctrl1; + u32 wdru_ctrl2; + u32 wdru_tim; + u32 wdru_count; + u32 wdru_stat; + u32 wdru_wrlock; +}; + +struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \ + (struct stv0991_wd_ru *)WDRU_BASE_ADDR; + +/* Watchdog control register */ +#define WDRU_RST_SYS 0x1 + +#endif diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h index 9d797db..6b10bdf 100644 --- a/arch/arm/include/asm/arch-vf610/imx-regs.h +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -256,6 +256,14 @@ #define DDRMC_CR161_TODTH_RD(v) (((v) & 0xf) << 8) #define DDRMC_CR161_TODTH_WR(v) ((v) & 0xf) +/* System Reset Controller (SRC) */ +#define SRC_SRSR_SW_RST (0x1 << 18) +#define SRC_SRSR_RESETB (0x1 << 7) +#define SRC_SRSR_JTAG_RST (0x1 << 5) +#define SRC_SRSR_WDOG_M4 (0x1 << 4) +#define SRC_SRSR_WDOG_A5 (0x1 << 3) +#define SRC_SRSR_POR_RST (0x1 << 0) + #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index 06922c0..67ac260 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -301,7 +301,7 @@ int board_eth_init(bd_t *bis) /* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); - ret = enable_fec_anatop_clock(ENET_50MHz); + ret = enable_fec_anatop_clock(ENET_50MHZ); if (ret) return ret; diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index 8111edf..cac6d73 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -234,7 +234,7 @@ static int setup_fec(void) /* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); - return enable_fec_anatop_clock(ENET_50MHz); + return enable_fec_anatop_clock(ENET_50MHZ); } #endif diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 7aee074..8b959b9 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -168,7 +168,7 @@ static int setup_fec(void) reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; writel(reg, &anatop->pll_enet); - return enable_fec_anatop_clock(ENET_125MHz); + return enable_fec_anatop_clock(ENET_125MHZ); } int board_eth_init(bd_t *bis) diff --git a/board/renesas/alt/Makefile b/board/renesas/alt/Makefile index 9ed12bd..6904e39 100644 --- a/board/renesas/alt/Makefile +++ b/board/renesas/alt/Makefile @@ -6,4 +6,4 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := alt.o qos.o +obj-y := alt.o qos.o ../rcar-gen2-common/common.o diff --git a/board/renesas/alt/alt.c b/board/renesas/alt/alt.c index 523c5f1..8cc17e9 100644 --- a/board/renesas/alt/alt.c +++ b/board/renesas/alt/alt.c @@ -15,6 +15,8 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> +#include <asm/arch/mmc.h> #include <netdev.h> #include <miiphy.h> #include <i2c.h> @@ -37,30 +39,11 @@ void s_init(void) qos_init(); } -#define MSTPSR1 0xE6150038 -#define SMSTPCR1 0xE6150134 #define TMU0_MSTP125 (1 << 25) - -#define MSTPSR7 0xE61501C4 -#define SMSTPCR7 0xE615014C #define SCIF2_MSTP719 (1 << 19) - -#define MSTPSR8 0xE61509A0 -#define SMSTPCR8 0xE6150990 #define ETHER_MSTP813 (1 << 13) - -#define MSTPSR3 0xE6150048 -#define SMSTPCR3 0xE615013C #define IIC1_MSTP323 (1 << 23) - -#define mstp_setbits(type, addr, saddr, set) \ - out_##type((saddr), in_##type(addr) | (set)) -#define mstp_clrbits(type, addr, saddr, clear) \ - out_##type((saddr), in_##type(addr) & ~(clear)) -#define mstp_setbits_le32(addr, saddr, set) \ - mstp_setbits(le32, addr, saddr, set) -#define mstp_clrbits_le32(addr, saddr, clear) \ - mstp_clrbits(le32, addr, saddr, clear) +#define MMC0_MSTP315 (1 << 15) int board_early_init_f(void) { @@ -76,15 +59,13 @@ int board_early_init_f(void) /* IIC1 / sh-i2c ch1 */ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323); +#ifdef CONFIG_SH_MMCIF + /* MMC */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315); +#endif return 0; } -void arch_preboot_os(void) -{ - /* Disable TMU0 */ - mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); -} - int board_init(void) { /* adress of boot parameters */ @@ -145,6 +126,19 @@ int board_eth_init(bd_t *bis) #endif } +int board_mmc_init(bd_t *bis) +{ + int ret = 0; + +#ifdef CONFIG_SH_MMCIF + gpio_request(GPIO_GP_4_31, NULL); + gpio_set_value(GPIO_GP_4_31, 1); + + ret = mmcif_mmc_init(); +#endif + return ret; +} + int dram_init(void) { gd->ram_size = CONFIG_SYS_SDRAM_SIZE; diff --git a/board/renesas/gose/Makefile b/board/renesas/gose/Makefile index a4fb6cc..2dac748 100644 --- a/board/renesas/gose/Makefile +++ b/board/renesas/gose/Makefile @@ -6,4 +6,4 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := gose.o qos.o +obj-y := gose.o qos.o ../rcar-gen2-common/common.o diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c index 715fba0..677b976 100644 --- a/board/renesas/gose/gose.c +++ b/board/renesas/gose/gose.c @@ -15,6 +15,7 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> #include <netdev.h> #include <miiphy.h> #include <i2c.h> @@ -41,27 +42,10 @@ void s_init(void) qos_init(); } -#define MSTPSR1 0xE6150038 -#define SMSTPCR1 0xE6150134 #define TMU0_MSTP125 (1 << 25) - -#define MSTPSR7 0xE61501C4 -#define SMSTPCR7 0xE615014C #define SCIF0_MSTP721 (1 << 21) - -#define MSTPSR8 0xE61509A0 -#define SMSTPCR8 0xE6150990 #define ETHER_MSTP813 (1 << 13) -#define mstp_setbits(type, addr, saddr, set) \ - out_##type((saddr), in_##type(addr) | (set)) -#define mstp_clrbits(type, addr, saddr, clear) \ - out_##type((saddr), in_##type(addr) & ~(clear)) -#define mstp_setbits_le32(addr, saddr, set) \ - mstp_setbits(le32, addr, saddr, set) -#define mstp_clrbits_le32(addr, saddr, clear) \ - mstp_clrbits(le32, addr, saddr, clear) - int board_early_init_f(void) { /* TMU0 */ @@ -76,16 +60,6 @@ int board_early_init_f(void) return 0; } -#define TSTR0 0x04 -#define TSTR0_STR0 0x01 -void arch_preboot_os(void) -{ - /* stop TMU0 */ - mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0); - /* Disable TMU0 */ - mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); -} - #define PUPR5 0xE6060114 #define PUPR5_ETH 0x3FFC0000 #define PUPR5_ETH_MAGIC (1 << 27) diff --git a/board/renesas/koelsch/Makefile b/board/renesas/koelsch/Makefile index b4d0183..c10bba5 100644 --- a/board/renesas/koelsch/Makefile +++ b/board/renesas/koelsch/Makefile @@ -6,4 +6,4 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := koelsch.o qos.o +obj-y := koelsch.o qos.o ../rcar-gen2-common/common.o diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c index 244bc58..10fa571 100644 --- a/board/renesas/koelsch/koelsch.c +++ b/board/renesas/koelsch/koelsch.c @@ -16,6 +16,7 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> #include <netdev.h> #include <miiphy.h> #include <i2c.h> @@ -43,27 +44,10 @@ void s_init(void) qos_init(); } -#define MSTPSR1 0xE6150038 -#define SMSTPCR1 0xE6150134 #define TMU0_MSTP125 (1 << 25) - -#define MSTPSR7 0xE61501C4 -#define SMSTPCR7 0xE615014C #define SCIF0_MSTP721 (1 << 21) - -#define MSTPSR8 0xE61509A0 -#define SMSTPCR8 0xE6150990 #define ETHER_MSTP813 (1 << 13) -#define mstp_setbits(type, addr, saddr, set) \ - out_##type((saddr), in_##type(addr) | (set)) -#define mstp_clrbits(type, addr, saddr, clear) \ - out_##type((saddr), in_##type(addr) & ~(clear)) -#define mstp_setbits_le32(addr, saddr, set) \ - mstp_setbits(le32, addr, saddr, set) -#define mstp_clrbits_le32(addr, saddr, clear) \ - mstp_clrbits(le32, addr, saddr, clear) - int board_early_init_f(void) { mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); @@ -77,12 +61,6 @@ int board_early_init_f(void) return 0; } -void arch_preboot_os(void) -{ - /* Disable TMU0 */ - mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); -} - /* LSI pin pull-up control */ #define PUPR5 0xe6060114 #define PUPR5_ETH 0x3FFC0000 diff --git a/board/renesas/lager/Makefile b/board/renesas/lager/Makefile index 034c6f8..8d03461 100644 --- a/board/renesas/lager/Makefile +++ b/board/renesas/lager/Makefile @@ -6,4 +6,4 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := lager.o qos.o +obj-y := lager.o qos.o ../rcar-gen2-common/common.o diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index 93273b2..d1e29d2 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -18,8 +18,11 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> +#include <asm/arch/mmc.h> #include <miiphy.h> #include <i2c.h> +#include <mmc.h> #include "qos.h" DECLARE_GLOBAL_DATA_PTR; @@ -50,26 +53,10 @@ void s_init(void) qos_init(); } -#define MSTPSR1 0xE6150038 -#define SMSTPCR1 0xE6150134 #define TMU0_MSTP125 (1 << 25) - -#define MSTPSR7 0xE61501C4 -#define SMSTPCR7 0xE615014C #define SCIF0_MSTP721 (1 << 21) - -#define MSTPSR8 0xE61509A0 -#define SMSTPCR8 0xE6150990 #define ETHER_MSTP813 (1 << 13) - -#define mstp_setbits(type, addr, saddr, set) \ - out_##type((saddr), in_##type(addr) | (set)) -#define mstp_clrbits(type, addr, saddr, clear) \ - out_##type((saddr), in_##type(addr) & ~(clear)) -#define mstp_setbits_le32(addr, saddr, set) \ - mstp_setbits(le32, addr, saddr, set) -#define mstp_clrbits_le32(addr, saddr, clear) \ - mstp_clrbits(le32, addr, saddr, clear) +#define MMC1_MSTP305 (1 << 5) int board_early_init_f(void) { @@ -79,16 +66,12 @@ int board_early_init_f(void) mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); /* ETHER */ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); + /* eMMC */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305); return 0; } -void arch_preboot_os(void) -{ - /* Disable TMU0 */ - mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); -} - DECLARE_GLOBAL_DATA_PTR; int board_init(void) { @@ -163,6 +146,28 @@ int board_phy_config(struct phy_device *phydev) return 0; } +int board_mmc_init(bd_t *bis) +{ + int ret = 0; + +#ifdef CONFIG_SH_MMCIF + gpio_request(GPIO_FN_MMC1_D0, NULL); + gpio_request(GPIO_FN_MMC1_D1, NULL); + gpio_request(GPIO_FN_MMC1_D2, NULL); + gpio_request(GPIO_FN_MMC1_D3, NULL); + gpio_request(GPIO_FN_MMC1_D4, NULL); + gpio_request(GPIO_FN_MMC1_D5, NULL); + gpio_request(GPIO_FN_MMC1_D6, NULL); + gpio_request(GPIO_FN_MMC1_D7, NULL); + gpio_request(GPIO_FN_MMC1_CLK, NULL); + gpio_request(GPIO_FN_MMC1_CMD, NULL); + + ret = mmcif_mmc_init(); +#endif + return ret; +} + + int dram_init(void) { gd->ram_size = CONFIG_SYS_SDRAM_SIZE; diff --git a/board/renesas/rcar-gen2-common/common.c b/board/renesas/rcar-gen2-common/common.c new file mode 100644 index 0000000..0103f42 --- /dev/null +++ b/board/renesas/rcar-gen2-common/common.c @@ -0,0 +1,59 @@ +/* + * board/renesas/rcar-gen2-common/common.c + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> + +#define TSTR0 0x04 +#define TSTR0_STR0 0x01 + +static struct mstp_ctl mstptbl[] = { + { SMSTPCR0, MSTP0_BITS, CONFIG_SMSTP0_ENA, + RMSTPCR0, MSTP0_BITS, CONFIG_RMSTP0_ENA }, + { SMSTPCR1, MSTP1_BITS, CONFIG_SMSTP1_ENA, + RMSTPCR1, MSTP1_BITS, CONFIG_RMSTP1_ENA }, + { SMSTPCR2, MSTP2_BITS, CONFIG_SMSTP2_ENA, + RMSTPCR2, MSTP2_BITS, CONFIG_RMSTP2_ENA }, + { SMSTPCR3, MSTP3_BITS, CONFIG_SMSTP3_ENA, + RMSTPCR3, MSTP3_BITS, CONFIG_RMSTP3_ENA }, + { SMSTPCR4, MSTP4_BITS, CONFIG_SMSTP4_ENA, + RMSTPCR4, MSTP4_BITS, CONFIG_RMSTP4_ENA }, + { SMSTPCR5, MSTP5_BITS, CONFIG_SMSTP5_ENA, + RMSTPCR5, MSTP5_BITS, CONFIG_RMSTP5_ENA }, + /* No MSTP6 */ + { SMSTPCR7, MSTP7_BITS, CONFIG_SMSTP7_ENA, + RMSTPCR7, MSTP7_BITS, CONFIG_RMSTP7_ENA }, + { SMSTPCR8, MSTP8_BITS, CONFIG_SMSTP8_ENA, + RMSTPCR8, MSTP8_BITS, CONFIG_RMSTP8_ENA }, + { SMSTPCR9, MSTP9_BITS, CONFIG_SMSTP9_ENA, + RMSTPCR9, MSTP9_BITS, CONFIG_RMSTP9_ENA }, + { SMSTPCR10, MSTP10_BITS, CONFIG_SMSTP10_ENA, + RMSTPCR10, MSTP10_BITS, CONFIG_RMSTP10_ENA }, + { SMSTPCR11, MSTP11_BITS, CONFIG_SMSTP1_ENA, + RMSTPCR11, MSTP11_BITS, CONFIG_RMSTP11_ENA }, +}; + +void arch_preboot_os(void) +{ + int i; + + /* stop TMU0 */ + mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0); + + /* Stop module clock */ + for (i = 0; i < ARRAY_SIZE(mstptbl); i++) { + mstp_setclrbits_le32(mstptbl[i].s_addr, mstptbl[i].s_dis, + mstptbl[i].s_ena); + mstp_setclrbits_le32(mstptbl[i].r_addr, mstptbl[i].r_dis, + mstptbl[i].r_ena); + } +} diff --git a/board/solidrun/hummingboard/hummingboard.c b/board/solidrun/hummingboard/hummingboard.c index 6d204b3..52c384b 100644 --- a/board/solidrun/hummingboard/hummingboard.c +++ b/board/solidrun/hummingboard/hummingboard.c @@ -146,7 +146,7 @@ int board_eth_init(bd_t *bis) { struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; - int ret = enable_fec_anatop_clock(ENET_25MHz); + int ret = enable_fec_anatop_clock(ENET_25MHZ); if (ret) return ret; diff --git a/board/st/stv0991/Kconfig b/board/st/stv0991/Kconfig new file mode 100644 index 0000000..8bda349 --- /dev/null +++ b/board/st/stv0991/Kconfig @@ -0,0 +1,23 @@ +if TARGET_STV0991 + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "stv0991" + +config SYS_VENDOR + string + default "st" + +config SYS_SOC + string + default "stv0991" + +config SYS_CONFIG_NAME + string + default "stv0991" + +endif diff --git a/board/st/stv0991/MAINTAINERS b/board/st/stv0991/MAINTAINERS new file mode 100644 index 0000000..87221e9 --- /dev/null +++ b/board/st/stv0991/MAINTAINERS @@ -0,0 +1,5 @@ +STV0991 APPLICATION BOARD +M: Vikas Manocha <vikas.manocha@st.com> +S: Maintained +F: board/st/stv0991/ +F: include/configs/stv0991.h diff --git a/board/st/stv0991/Makefile b/board/st/stv0991/Makefile new file mode 100644 index 0000000..fb5169a --- /dev/null +++ b/board/st/stv0991/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2014 +# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := stv0991.o diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c new file mode 100644 index 0000000..f465699 --- /dev/null +++ b/board/st/stv0991/stv0991.c @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/stv0991_periph.h> +#include <asm/arch/stv0991_defs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> +#include <netdev.h> +#include <asm/io.h> +#include <dm/platdata.h> +#include <dm/platform_data/serial_pl01x.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct gpio_regs *const gpioa_regs = + (struct gpio_regs *) GPIOA_BASE_ADDR; + +static const struct pl01x_serial_platdata serial_platdata = { + .base = 0x80406000, + .type = TYPE_PL011, + .clock = 2700 * 1000, +}; + +U_BOOT_DEVICE(stv09911_serials) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, +}; + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +void show_boot_progress(int progress) +{ + printf("%i\n", progress); +} +#endif + +void enable_eth_phy(void) +{ + /* Set GPIOA_06 pad HIGH (Appli board)*/ + writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir); + writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data); +} +int board_eth_enable(void) +{ + stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4); + clock_setup(ETH_CLOCK_CFG); + enable_eth_phy(); + return 0; +} + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + board_eth_enable(); + return 0; +} + +int board_uart_init(void) +{ + stv0991_pinmux_config(UART_GPIOC_30_31); + clock_setup(UART_CLOCK_CFG); + return 0; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + board_uart_init(); + return 0; +} +#endif + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int ret = 0; + +#if defined(CONFIG_DESIGNWARE_ETH) + u32 interface = PHY_INTERFACE_MODE_MII; + if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0) + ret++; +#endif + return ret; +} +#endif diff --git a/board/tbs/tbs2910/Kconfig b/board/tbs/tbs2910/Kconfig index c514e24..84b243e 100644 --- a/board/tbs/tbs2910/Kconfig +++ b/board/tbs/tbs2910/Kconfig @@ -1,23 +1,15 @@ if TARGET_TBS2910 -config SYS_CPU - string - default "armv7" - config SYS_BOARD - string default "tbs2910" config SYS_VENDOR - string default "tbs" config SYS_SOC - string default "mx6" config SYS_CONFIG_NAME - string default "tbs2910" endif diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig new file mode 100644 index 0000000..a05e991 --- /dev/null +++ b/configs/stv0991_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="stv0991" +CONFIG_ARM=y +CONFIG_TARGET_STV0991=y diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c index 9a2b547..01a4148 100644 --- a/drivers/block/dwc_ahsata.c +++ b/drivers/block/dwc_ahsata.c @@ -594,22 +594,24 @@ int init_sata(int dev) int reset_sata(int dev) { - struct ahci_probe_ent *probe_ent = - (struct ahci_probe_ent *)sata_dev_desc[dev].priv; - struct sata_host_regs *host_mmio = - (struct sata_host_regs *)probe_ent->mmio_base; + struct ahci_probe_ent *probe_ent; + struct sata_host_regs *host_mmio; if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) { printf("The sata index %d is out of ranges\n\r", dev); return -1; } + probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + if (NULL == probe_ent) + /* not initialized, so nothing to reset */ + return 0; + + host_mmio = (struct sata_host_regs *)probe_ent->mmio_base; setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR); while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR) udelay(100); - disable_sata_clock(); - return 0; } diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index 89737af..d92044e 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -81,8 +81,6 @@ static int finish_access(struct ocotp_regs *regs, const char *caller) err = !!(readl(®s->ctrl) & BM_CTRL_ERROR); clear_error(regs); - enable_ocotp_clk(0); - if (err) { printf("mxc_ocotp %s(): Access protect error\n", caller); return -EIO; diff --git a/drivers/misc/mxs_ocotp.c b/drivers/misc/mxs_ocotp.c index 545d3eb..6f0a1d3 100644 --- a/drivers/misc/mxs_ocotp.c +++ b/drivers/misc/mxs_ocotp.c @@ -187,6 +187,8 @@ static int mxs_ocotp_write_fuse(uint32_t addr, uint32_t mask) uint32_t hclk_val, vddio_val; int ret; + mxs_ocotp_clear_error(); + /* Make sure the banks are closed for reading. */ ret = mxs_ocotp_read_bank_open(0); if (ret) { @@ -221,13 +223,17 @@ static int mxs_ocotp_write_fuse(uint32_t addr, uint32_t mask) goto fail; } + /* Check for errors */ + if (readl(&ocotp_regs->hw_ocotp_ctrl) & OCOTP_CTRL_ERROR) { + puts("Failed writing fuses!\n"); + ret = -EPERM; + goto fail; + } + fail: mxs_ocotp_scale_vddio(0, &vddio_val); - ret = mxs_ocotp_scale_hclk(0, &hclk_val); - if (ret) { + if (mxs_ocotp_scale_hclk(0, &hclk_val)) puts("Failed scaling up the HCLK!\n"); - return ret; - } return ret; } diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 1161585..0bd9cfd 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev) if (fuse == 0 || fuse == ~0) { printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); return -EPERM; - } else { - printf("CPU: Thermal calibration data: 0x%x\n", fuse); } *priv = fuse; diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 7d8daa2..508db56 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -79,6 +79,10 @@ #define CONFIG_SYS_PROMPT "=> " #endif +#ifndef CONFIG_SYS_PBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 128) +#endif + #ifndef CONFIG_FIT_SIGNATURE #define CONFIG_IMAGE_FORMAT_LEGACY #endif diff --git a/include/configs/alt.h b/include/configs/alt.h index 5c8223c..58eac31 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -95,4 +95,23 @@ #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +/* MMCIF */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC + +#define CONFIG_SH_MMCIF +#define CONFIG_SH_MMCIF_ADDR 0xee200000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF2 */ +#define CONFIG_SMSTP7_ENA 0x00080000 + #endif /* __ALT_H */ diff --git a/include/configs/gose.h b/include/configs/gose.h index c347e45..44c8a30 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -91,4 +91,14 @@ #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF0 */ +#define CONFIG_SMSTP7_ENA 0x00200000 + #endif /* __GOSE_H */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index bb98302..c14889c 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -92,4 +92,15 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF*/ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF0 */ +#define CONFIG_SMSTP7_ENA 0x00200000 + #endif /* __KOELSCH_H */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 37be38f..291267f 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -93,4 +93,23 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_STORAGE +/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC + +#define CONFIG_SH_MMCIF +#define CONFIG_SH_MMCIF_ADDR 0xEE220000 +#define CONFIG_SH_MMCIF_CLK 97500000 + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF0 */ +#define CONFIG_SMSTP7_ENA 0x00200000 + #endif /* __LAGER_H */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 10fb1f4..42bc3c8 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -94,6 +94,7 @@ /* Command definition */ #include <config_cmd_default.h> #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD #undef CONFIG_CMD_IMLS diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 9fdd841..f0f721e 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -220,9 +220,6 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index d8ab291..5e0edab 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -208,6 +208,16 @@ #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif +#define CONFIG_DM +#define CONFIG_DM_THERMAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#define CONFIG_IMX6_THERMAL + +#define CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) +#define CONFIG_MXC_OCOTP +#endif + /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 46c7526..c33f1cb 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -28,6 +28,9 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_SF #define CONFIG_CMD_SPI +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -36,6 +39,7 @@ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT +#define CONFIG_FS_EXT4 #define CONFIG_EXT4_WRITE #define CONFIG_CMDLINE_TAG diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h new file mode 100644 index 0000000..fd9bd63 --- /dev/null +++ b/include/configs/stv0991.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_STV0991_H +#define __CONFIG_STV0991_H +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_CORTEX_R4 + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_NO_FLASH + +/* ram memory-related information */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define PHYS_SDRAM_1_SIZE 0x00198000 + +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR \ + (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024) +#define CONFIG_SYS_MALLOC_F_LEN 0x2000 + +#define CONFIG_DM +/* serial port (PL011) configuration */ +#define CONFIG_BAUDRATE 115200 +#ifdef CONFIG_DM +#define CONFIG_DM_SERIAL +#define CONFIG_PL01X_SERIAL +#else +#define CONFIG_SYS_SERIAL0 0x80406000 +#define CONFIG_CONS_INDEX 0 +#define CONFIG_PL011_SERIAL +#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} +#define CONFIG_PL011_CLOCK (2700 * 1000) +#endif + +/* user interface */ +#define CONFIG_SYS_PROMPT "STV0991> " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) + +/* MISC */ +#define CONFIG_SYS_LOAD_ADDR 0x00000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +/* U-boot Load Address */ +#define CONFIG_SYS_TEXT_BASE 0x00010000 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* GMAC related configs */ + +#define CONFIG_MII +#define CONFIG_PHYLIB +#define CONFIG_CMD_NET +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_PHY_MICREL + +/* Command support defines */ +#define CONFIG_CMD_PING +#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ + +#include "config_cmd_default.h" +#undef CONFIG_CMD_SAVEENV + +#define CONFIG_SYS_MEMTEST_START 0x0000 +#define CONFIG_SYS_MEMTEST_END 1024*1024 +#define CONFIG_CMD_MEMTEST + +/* Misc configuration */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "go 0x40040000" +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR " " +#define CONFIG_AUTOBOOT_PROMPT \ + "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay + +#endif /* __CONFIG_H */ diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 6ab2184..c097b98 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -167,7 +167,7 @@ #define CONFIG_USB_STORAGE #define CONFIG_USB_KEYBOARD #ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE #define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_PREBOOT "if hdmidet; then usb start; fi" #endif /* CONFIG_USB_KEYBOARD */ |