summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/samsung/trats/trats.c63
-rw-r--r--common/Makefile1
-rw-r--r--common/cmd_dfu.c5
-rw-r--r--common/cmd_usb_mass_storage.c86
-rw-r--r--drivers/dfu/dfu_mmc.c31
-rw-r--r--drivers/serial/usbtty.c2
-rw-r--r--drivers/usb/eth/smsc95xx.c4
-rw-r--r--drivers/usb/gadget/Makefile10
-rw-r--r--drivers/usb/gadget/composite.c19
-rw-r--r--drivers/usb/gadget/f_dfu.c3
-rw-r--r--drivers/usb/gadget/f_mass_storage.c2793
-rw-r--r--drivers/usb/gadget/g_dnl.c6
-rw-r--r--drivers/usb/gadget/storage_common.c653
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-exynos.c51
-rw-r--r--drivers/usb/host/ehci-hcd.c318
-rw-r--r--drivers/usb/host/ehci-pci.c60
-rw-r--r--drivers/usb/host/ehci-spear.c59
-rw-r--r--drivers/usb/host/ehci.h6
-rw-r--r--include/configs/coreboot.h17
-rw-r--r--include/configs/trats.h5
-rw-r--r--include/usb_mass_storage.h55
-rw-r--r--include/usbdevice.h4
23 files changed, 4203 insertions, 49 deletions
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 88d193d..9207646 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -42,6 +42,7 @@
#include <power/max8997_muic.h>
#include <power/battery.h>
#include <power/max17042_fg.h>
+#include <usb_mass_storage.h>
#include "setup.h"
@@ -791,3 +792,65 @@ void init_panel_info(vidinfo_t *vid)
setenv("lcdinfo", "lcd=s6e8ax0");
}
+
+#ifdef CONFIG_USB_GADGET_MASS_STORAGE
+static int ums_read_sector(struct ums_device *ums_dev,
+ ulong start, lbaint_t blkcnt, void *buf)
+{
+ if (ums_dev->mmc->block_dev.block_read(ums_dev->dev_num,
+ start + ums_dev->offset, blkcnt, buf) != blkcnt)
+ return -1;
+
+ return 0;
+}
+
+static int ums_write_sector(struct ums_device *ums_dev,
+ ulong start, lbaint_t blkcnt, const void *buf)
+{
+ if (ums_dev->mmc->block_dev.block_write(ums_dev->dev_num,
+ start + ums_dev->offset, blkcnt, buf) != blkcnt)
+ return -1;
+
+ return 0;
+}
+
+static void ums_get_capacity(struct ums_device *ums_dev,
+ long long int *capacity)
+{
+ long long int tmp_capacity;
+
+ tmp_capacity = (long long int) ((ums_dev->offset + ums_dev->part_size)
+ * SECTOR_SIZE);
+ *capacity = ums_dev->mmc->capacity - tmp_capacity;
+}
+
+static struct ums_board_info ums_board = {
+ .read_sector = ums_read_sector,
+ .write_sector = ums_write_sector,
+ .get_capacity = ums_get_capacity,
+ .name = "TRATS UMS disk",
+ .ums_dev = {
+ .mmc = NULL,
+ .dev_num = 0,
+ .offset = 0,
+ .part_size = 0.
+ },
+};
+
+struct ums_board_info *board_ums_init(unsigned int dev_num, unsigned int offset,
+ unsigned int part_size)
+{
+ struct mmc *mmc;
+
+ mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return NULL;
+
+ ums_board.ums_dev.mmc = mmc;
+ ums_board.ums_dev.dev_num = dev_num;
+ ums_board.ums_dev.offset = offset;
+ ums_board.ums_dev.part_size = part_size;
+
+ return &ums_board;
+}
+#endif
diff --git a/common/Makefile b/common/Makefile
index 08af1a8..1abf4ea 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -179,6 +179,7 @@ COBJS-y += cmd_usb.o
COBJS-y += usb.o usb_hub.o
COBJS-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
+COBJS-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o
COBJS-$(CONFIG_CMD_XIMG) += cmd_ximg.o
COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o
COBJS-$(CONFIG_CMD_SPL) += cmd_spl.o
diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c
index 01d6b3a..83ef324 100644
--- a/common/cmd_dfu.c
+++ b/common/cmd_dfu.c
@@ -50,12 +50,15 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (ret)
return CMD_RET_FAILURE;
- if (strcmp(argv[3], "list") == 0) {
+ if (argc > 3 && strcmp(argv[3], "list") == 0) {
dfu_show_entities();
goto done;
}
+#ifdef CONFIG_TRATS
board_usb_init();
+#endif
+
g_dnl_register(s);
while (1) {
if (ctrlc())
diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c
new file mode 100644
index 0000000..87a5f2f
--- /dev/null
+++ b/common/cmd_usb_mass_storage.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <errno.h>
+#include <common.h>
+#include <command.h>
+#include <g_dnl.h>
+#include <usb_mass_storage.h>
+
+int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ char *ep;
+ unsigned int dev_num = 0, offset = 0, part_size = 0;
+ int rc;
+
+ struct ums_board_info *ums_info;
+ static char *s = "ums";
+
+ if (argc < 2) {
+ printf("usage: ums <dev> - e.g. ums 0\n");
+ return 0;
+ }
+
+ dev_num = (int)simple_strtoul(argv[1], &ep, 16);
+
+ if (dev_num) {
+ puts("\nSet eMMC device to 0! - e.g. ums 0\n");
+ goto fail;
+ }
+
+ board_usb_init();
+ ums_info = board_ums_init(dev_num, offset, part_size);
+
+ if (!ums_info) {
+ printf("MMC: %d -> NOT available\n", dev_num);
+ goto fail;
+ }
+ rc = fsg_init(ums_info);
+ if (rc) {
+ printf("cmd ums: fsg_init failed\n");
+ goto fail;
+ }
+
+ g_dnl_register(s);
+
+ while (1) {
+ /* Handle control-c and timeouts */
+ if (ctrlc()) {
+ printf("The remote end did not respond in time.\n");
+ goto exit;
+ }
+ usb_gadget_handle_interrupts();
+ /* Check if USB cable has been detached */
+ if (fsg_main_thread(NULL) == EIO)
+ goto exit;
+ }
+exit:
+ g_dnl_unregister();
+ return 0;
+
+fail:
+ return -1;
+}
+
+U_BOOT_CMD(ums, CONFIG_SYS_MAXARGS, 1, do_usb_mass_storage,
+ "Use the UMS [User Mass Storage]",
+ "ums - User Mass Storage Gadget"
+);
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 5d504df..083d745 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -21,6 +21,7 @@
#include <common.h>
#include <malloc.h>
+#include <errno.h>
#include <dfu.h>
enum dfu_mmc_op {
@@ -153,6 +154,10 @@ int dfu_read_medium_mmc(struct dfu_entity *dfu, void *buf, long *len)
int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s)
{
+ int dev, part;
+ struct mmc *mmc;
+ block_dev_desc_t *blk_dev;
+ disk_partition_t partinfo;
char *st;
dfu->dev_type = DFU_DEV_MMC;
@@ -166,8 +171,34 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s)
dfu->layout = DFU_FS_FAT;
} else if (!strcmp(st, "ext4")) {
dfu->layout = DFU_FS_EXT4;
+ } else if (!strcmp(st, "part")) {
+
+ dfu->layout = DFU_RAW_ADDR;
+
+ dev = simple_strtoul(s, &s, 10);
+ s++;
+ part = simple_strtoul(s, &s, 10);
+
+ mmc = find_mmc_device(dev);
+ if (mmc == NULL || mmc_init(mmc)) {
+ printf("%s: could not find mmc device #%d!\n", __func__, dev);
+ return -ENODEV;
+ }
+
+ blk_dev = &mmc->block_dev;
+ if (get_partition_info(blk_dev, part, &partinfo) != 0) {
+ printf("%s: could not find partition #%d on mmc device #%d!\n",
+ __func__, part, dev);
+ return -ENODEV;
+ }
+
+ dfu->data.mmc.lba_start = partinfo.start;
+ dfu->data.mmc.lba_size = partinfo.size;
+ dfu->data.mmc.lba_blk_size = partinfo.blksz;
+
} else {
printf("%s: Memory layout (%s) not supported!\n", __func__, st);
+ return -ENODEV;
}
if (dfu->layout == DFU_FS_EXT4 || dfu->layout == DFU_FS_FAT) {
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index e47cb9a..148d1a6 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -63,7 +63,7 @@
/*
* Buffers to hold input and output data
*/
-#define USBTTY_BUFFER_SIZE 256
+#define USBTTY_BUFFER_SIZE 2048
static circbuf_t usbtty_input;
static circbuf_t usbtty_output;
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index dc5ca65..fd8f8a7 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -265,10 +265,6 @@ static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev)
do {
smsc95xx_read_reg(dev, E2P_CMD, &val);
- if (!(val & E2P_CMD_LOADED_)) {
- debug("No EEPROM present\n");
- return -1;
- }
if (!(val & E2P_CMD_BUSY_))
return 0;
udelay(40);
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 040eaba..e545b6b 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -25,15 +25,21 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libusb_gadget.o
+# if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)
+# Everytime you forget how crufty makefiles can get things like
+# this remind you...
+ifneq (,$(CONFIG_USB_GADGET)$(CONFIG_USB_ETHER))
+COBJS-y += epautoconf.o config.o usbstring.o
+endif
+
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
-COBJS-y += epautoconf.o config.o usbstring.o
COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o
endif
ifdef CONFIG_USB_ETHER
-COBJS-y += ether.o epautoconf.o config.o usbstring.o
+COBJS-y += ether.o
COBJS-$(CONFIG_USB_ETH_RNDIS) += rndis.o
COBJS-$(CONFIG_MV_UDC) += mv_udc.o
COBJS-$(CONFIG_CPU_PXA25X) += pxa25x_udc.o
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index ebb5131..2c5600e 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -859,6 +859,25 @@ unknown:
if (&f->list == &cdev->config->functions)
f = NULL;
break;
+ /*
+ * dfu-util (version 0.5) sets bmRequestType.Receipent = Device
+ * for non-standard request (w_value = 0x21,
+ * bRequest = GET_DESCRIPTOR in this case).
+ * When only one interface is registered (as it is done now),
+ * then this request shall be handled as it was requested for
+ * interface.
+ *
+ * In the below code it is checked if only one interface is
+ * present and proper function for it is extracted. Due to that
+ * function's setup (f->setup) is called to handle this
+ * special non-standard request.
+ */
+ case USB_RECIP_DEVICE:
+ debug("cdev->config->next_interface_id: %d intf: %d\n",
+ cdev->config->next_interface_id, intf);
+ if (cdev->config->next_interface_id == 1)
+ f = cdev->config->interface[intf];
+ break;
}
if (f && f->setup)
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index 10547e3..a322ae5 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -164,6 +164,9 @@ static void handle_getstatus(struct usb_request *req)
/* send status response */
dstat->bStatus = f_dfu->dfu_status;
+ dstat->bwPollTimeout[0] = 0;
+ dstat->bwPollTimeout[1] = 0;
+ dstat->bwPollTimeout[2] = 0;
dstat->bState = f_dfu->dfu_state;
dstat->iString = 0;
}
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
new file mode 100644
index 0000000..c28866f
--- /dev/null
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -0,0 +1,2793 @@
+/*
+ * f_mass_storage.c -- Mass Storage USB Composite Function
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyright (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/*
+ * The Mass Storage Function acts as a USB Mass Storage device,
+ * appearing to the host as a disk drive or as a CD-ROM drive. In
+ * addition to providing an example of a genuinely useful composite
+ * function for a USB device, it also illustrates a technique of
+ * double-buffering for increased throughput.
+ *
+ * Function supports multiple logical units (LUNs). Backing storage
+ * for each LUN is provided by a regular file or a block device.
+ * Access for each LUN can be limited to read-only. Moreover, the
+ * function can indicate that LUN is removable and/or CD-ROM. (The
+ * later implies read-only access.)
+ *
+ * MSF is configured by specifying a fsg_config structure. It has the
+ * following fields:
+ *
+ * nluns Number of LUNs function have (anywhere from 1
+ * to FSG_MAX_LUNS which is 8).
+ * luns An array of LUN configuration values. This
+ * should be filled for each LUN that
+ * function will include (ie. for "nluns"
+ * LUNs). Each element of the array has
+ * the following fields:
+ * ->filename The path to the backing file for the LUN.
+ * Required if LUN is not marked as
+ * removable.
+ * ->ro Flag specifying access to the LUN shall be
+ * read-only. This is implied if CD-ROM
+ * emulation is enabled as well as when
+ * it was impossible to open "filename"
+ * in R/W mode.
+ * ->removable Flag specifying that LUN shall be indicated as
+ * being removable.
+ * ->cdrom Flag specifying that LUN shall be reported as
+ * being a CD-ROM.
+ *
+ * lun_name_format A printf-like format for names of the LUN
+ * devices. This determines how the
+ * directory in sysfs will be named.
+ * Unless you are using several MSFs in
+ * a single gadget (as opposed to single
+ * MSF in many configurations) you may
+ * leave it as NULL (in which case
+ * "lun%d" will be used). In the format
+ * you can use "%d" to index LUNs for
+ * MSF's with more than one LUN. (Beware
+ * that there is only one integer given
+ * as an argument for the format and
+ * specifying invalid format may cause
+ * unspecified behaviour.)
+ * thread_name Name of the kernel thread process used by the
+ * MSF. You can safely set it to NULL
+ * (in which case default "file-storage"
+ * will be used).
+ *
+ * vendor_name
+ * product_name
+ * release Information used as a reply to INQUIRY
+ * request. To use default set to NULL,
+ * NULL, 0xffff respectively. The first
+ * field should be 8 and the second 16
+ * characters or less.
+ *
+ * can_stall Set to permit function to halt bulk endpoints.
+ * Disabled on some USB devices known not
+ * to work correctly. You should set it
+ * to true.
+ *
+ * If "removable" is not set for a LUN then a backing file must be
+ * specified. If it is set, then NULL filename means the LUN's medium
+ * is not loaded (an empty string as "filename" in the fsg_config
+ * structure causes error). The CD-ROM emulation includes a single
+ * data track and no audio tracks; hence there need be only one
+ * backing file per LUN. Note also that the CD-ROM block length is
+ * set to 512 rather than the more common value 2048.
+ *
+ *
+ * MSF includes support for module parameters. If gadget using it
+ * decides to use it, the following module parameters will be
+ * available:
+ *
+ * file=filename[,filename...]
+ * Names of the files or block devices used for
+ * backing storage.
+ * ro=b[,b...] Default false, boolean for read-only access.
+ * removable=b[,b...]
+ * Default true, boolean for removable media.
+ * cdrom=b[,b...] Default false, boolean for whether to emulate
+ * a CD-ROM drive.
+ * luns=N Default N = number of filenames, number of
+ * LUNs to support.
+ * stall Default determined according to the type of
+ * USB device controller (usually true),
+ * boolean to permit the driver to halt
+ * bulk endpoints.
+ *
+ * The module parameters may be prefixed with some string. You need
+ * to consult gadget's documentation or source to verify whether it is
+ * using those module parameters and if it does what are the prefixes
+ * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is
+ * the prefix).
+ *
+ *
+ * Requirements are modest; only a bulk-in and a bulk-out endpoint are
+ * needed. The memory requirement amounts to two 16K buffers, size
+ * configurable by a parameter. Support is included for both
+ * full-speed and high-speed operation.
+ *
+ * Note that the driver is slightly non-portable in that it assumes a
+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
+ * interrupt-in endpoints. With most device controllers this isn't an
+ * issue, but there may be some with hardware restrictions that prevent
+ * a buffer from being used by more than one endpoint.
+ *
+ *
+ * The pathnames of the backing files and the ro settings are
+ * available in the attribute files "file" and "ro" in the lun<n> (or
+ * to be more precise in a directory which name comes from
+ * "lun_name_format" option!) subdirectory of the gadget's sysfs
+ * directory. If the "removable" option is set, writing to these
+ * files will simulate ejecting/loading the medium (writing an empty
+ * line means eject) and adjusting a write-enable tab. Changes to the
+ * ro setting are not allowed when the medium is loaded or if CD-ROM
+ * emulation is being used.
+ *
+ * When a LUN receive an "eject" SCSI request (Start/Stop Unit),
+ * if the LUN is removable, the backing file is released to simulate
+ * ejection.
+ *
+ *
+ * This function is heavily based on "File-backed Storage Gadget" by
+ * Alan Stern which in turn is heavily based on "Gadget Zero" by David
+ * Brownell. The driver's SCSI command interface was based on the
+ * "Information technology - Small Computer System Interface - 2"
+ * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
+ * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
+ * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
+ * was based on the "Universal Serial Bus Mass Storage Class UFI
+ * Command Specification" document, Revision 1.0, December 14, 1998,
+ * available at
+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
+ */
+
+
+/*
+ * Driver Design
+ *
+ * The MSF is fairly straightforward. There is a main kernel
+ * thread that handles most of the work. Interrupt routines field
+ * callbacks from the controller driver: bulk- and interrupt-request
+ * completion notifications, endpoint-0 events, and disconnect events.
+ * Completion events are passed to the main thread by wakeup calls. Many
+ * ep0 requests are handled at interrupt time, but SetInterface,
+ * SetConfiguration, and device reset requests are forwarded to the
+ * thread in the form of "exceptions" using SIGUSR1 signals (since they
+ * should interrupt any ongoing file I/O operations).
+ *
+ * The thread's main routine implements the standard command/data/status
+ * parts of a SCSI interaction. It and its subroutines are full of tests
+ * for pending signals/exceptions -- all this polling is necessary since
+ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an
+ * indication that the driver really wants to be running in userspace.)
+ * An important point is that so long as the thread is alive it keeps an
+ * open reference to the backing file. This will prevent unmounting
+ * the backing file's underlying filesystem and could cause problems
+ * during system shutdown, for example. To prevent such problems, the
+ * thread catches INT, TERM, and KILL signals and converts them into
+ * an EXIT exception.
+ *
+ * In normal operation the main thread is started during the gadget's
+ * fsg_bind() callback and stopped during fsg_unbind(). But it can
+ * also exit when it receives a signal, and there's no point leaving
+ * the gadget running when the thread is dead. At of this moment, MSF
+ * provides no way to deregister the gadget when thread dies -- maybe
+ * a callback functions is needed.
+ *
+ * To provide maximum throughput, the driver uses a circular pipeline of
+ * buffer heads (struct fsg_buffhd). In principle the pipeline can be
+ * arbitrarily long; in practice the benefits don't justify having more
+ * than 2 stages (i.e., double buffering). But it helps to think of the
+ * pipeline as being a long one. Each buffer head contains a bulk-in and
+ * a bulk-out request pointer (since the buffer can be used for both
+ * output and input -- directions always are given from the host's
+ * point of view) as well as a pointer to the buffer and various state
+ * variables.
+ *
+ * Use of the pipeline follows a simple protocol. There is a variable
+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
+ * At any time that buffer head may still be in use from an earlier
+ * request, so each buffer head has a state variable indicating whether
+ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
+ * buffer head to be EMPTY, filling the buffer either by file I/O or by
+ * USB I/O (during which the buffer head is BUSY), and marking the buffer
+ * head FULL when the I/O is complete. Then the buffer will be emptied
+ * (again possibly by USB I/O, during which it is marked BUSY) and
+ * finally marked EMPTY again (possibly by a completion routine).
+ *
+ * A module parameter tells the driver to avoid stalling the bulk
+ * endpoints wherever the transport specification allows. This is
+ * necessary for some UDCs like the SuperH, which cannot reliably clear a
+ * halt on a bulk endpoint. However, under certain circumstances the
+ * Bulk-only specification requires a stall. In such cases the driver
+ * will halt the endpoint and set a flag indicating that it should clear
+ * the halt in software during the next device reset. Hopefully this
+ * will permit everything to work correctly. Furthermore, although the
+ * specification allows the bulk-out endpoint to halt when the host sends
+ * too much data, implementing this would cause an unavoidable race.
+ * The driver will always use the "no-stall" approach for OUT transfers.
+ *
+ * One subtle point concerns sending status-stage responses for ep0
+ * requests. Some of these requests, such as device reset, can involve
+ * interrupting an ongoing file I/O operation, which might take an
+ * arbitrarily long time. During that delay the host might give up on
+ * the original ep0 request and issue a new one. When that happens the
+ * driver should not notify the host about completion of the original
+ * request, as the host will no longer be waiting for it. So the driver
+ * assigns to each ep0 request a unique tag, and it keeps track of the
+ * tag value of the request associated with a long-running exception
+ * (device-reset, interface-change, or configuration-change). When the
+ * exception handler is finished, the status-stage response is submitted
+ * only if the current ep0 request tag is equal to the exception request
+ * tag. Thus only the most recently received ep0 request will get a
+ * status-stage response.
+ *
+ * Warning: This driver source file is too long. It ought to be split up
+ * into a header file plus about 3 separate .c files, to handle the details
+ * of the Gadget, USB Mass Storage, and SCSI protocols.
+ */
+
+/* #define VERBOSE_DEBUG */
+/* #define DUMP_MSGS */
+
+#include <config.h>
+#include <malloc.h>
+#include <common.h>
+
+#include <linux/err.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <usb_mass_storage.h>
+
+#include <asm/unaligned.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
+#include <usb/lin_gadget_compat.h>
+
+/*------------------------------------------------------------------------*/
+
+#define FSG_DRIVER_DESC "Mass Storage Function"
+#define FSG_DRIVER_VERSION "2012/06/5"
+
+static const char fsg_string_interface[] = "Mass Storage";
+
+
+#define FSG_NO_INTR_EP 1
+#define FSG_NO_DEVICE_STRINGS 1
+#define FSG_NO_OTG 1
+#define FSG_NO_INTR_EP 1
+
+#include "storage_common.c"
+
+/*-------------------------------------------------------------------------*/
+
+#define GFP_ATOMIC ((gfp_t) 0)
+#define PAGE_CACHE_SHIFT 12
+#define PAGE_CACHE_SIZE (1 << PAGE_CACHE_SHIFT)
+#define kthread_create(...) __builtin_return_address(0)
+#define wait_for_completion(...) do {} while (0)
+
+struct kref {int x; };
+struct completion {int x; };
+
+inline void set_bit(int nr, volatile void *addr)
+{
+ int mask;
+ unsigned int *a = (unsigned int *) addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a |= mask;
+}
+
+inline void clear_bit(int nr, volatile void *addr)
+{
+ int mask;
+ unsigned int *a = (unsigned int *) addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a &= ~mask;
+}
+
+struct fsg_dev;
+struct fsg_common;
+
+/* Data shared by all the FSG instances. */
+struct fsg_common {
+ struct usb_gadget *gadget;
+ struct fsg_dev *fsg, *new_fsg;
+
+ struct usb_ep *ep0; /* Copy of gadget->ep0 */
+ struct usb_request *ep0req; /* Copy of cdev->req */
+ unsigned int ep0_req_tag;
+
+ struct fsg_buffhd *next_buffhd_to_fill;
+ struct fsg_buffhd *next_buffhd_to_drain;
+ struct fsg_buffhd buffhds[FSG_NUM_BUFFERS];
+
+ int cmnd_size;
+ u8 cmnd[MAX_COMMAND_SIZE];
+
+ unsigned int nluns;
+ unsigned int lun;
+ struct fsg_lun luns[FSG_MAX_LUNS];
+
+ unsigned int bulk_out_maxpacket;
+ enum fsg_state state; /* For exception handling */
+ unsigned int exception_req_tag;
+
+ enum data_direction data_dir;
+ u32 data_size;
+ u32 data_size_from_cmnd;
+ u32 tag;
+ u32 residue;
+ u32 usb_amount_left;
+
+ unsigned int can_stall:1;
+ unsigned int free_storage_on_release:1;
+ unsigned int phase_error:1;
+ unsigned int short_packet_received:1;
+ unsigned int bad_lun_okay:1;
+ unsigned int running:1;
+
+ int thread_wakeup_needed;
+ struct completion thread_notifier;
+ struct task_struct *thread_task;
+
+ /* Callback functions. */
+ const struct fsg_operations *ops;
+ /* Gadget's private data. */
+ void *private_data;
+
+ const char *vendor_name; /* 8 characters or less */
+ const char *product_name; /* 16 characters or less */
+ u16 release;
+
+ /* Vendor (8 chars), product (16 chars), release (4
+ * hexadecimal digits) and NUL byte */
+ char inquiry_string[8 + 16 + 4 + 1];
+
+ struct kref ref;
+};
+
+struct fsg_config {
+ unsigned nluns;
+ struct fsg_lun_config {
+ const char *filename;
+ char ro;
+ char removable;
+ char cdrom;
+ char nofua;
+ } luns[FSG_MAX_LUNS];
+
+ /* Callback functions. */
+ const struct fsg_operations *ops;
+ /* Gadget's private data. */
+ void *private_data;
+
+ const char *vendor_name; /* 8 characters or less */
+ const char *product_name; /* 16 characters or less */
+
+ char can_stall;
+};
+
+struct fsg_dev {
+ struct usb_function function;
+ struct usb_gadget *gadget; /* Copy of cdev->gadget */
+ struct fsg_common *common;
+
+ u16 interface_number;
+
+ unsigned int bulk_in_enabled:1;
+ unsigned int bulk_out_enabled:1;
+
+ unsigned long atomic_bitflags;
+#define IGNORE_BULK_OUT 0
+
+ struct usb_ep *bulk_in;
+ struct usb_ep *bulk_out;
+};
+
+
+static inline int __fsg_is_set(struct fsg_common *common,
+ const char *func, unsigned line)
+{
+ if (common->fsg)
+ return 1;
+ ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
+ WARN_ON(1);
+ return 0;
+}
+
+#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
+
+
+static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
+{
+ return container_of(f, struct fsg_dev, function);
+}
+
+
+typedef void (*fsg_routine_t)(struct fsg_dev *);
+
+static int exception_in_progress(struct fsg_common *common)
+{
+ return common->state > FSG_STATE_IDLE;
+}
+
+/* Make bulk-out requests be divisible by the maxpacket size */
+static void set_bulk_out_req_length(struct fsg_common *common,
+ struct fsg_buffhd *bh, unsigned int length)
+{
+ unsigned int rem;
+
+ bh->bulk_out_intended_length = length;
+ rem = length % common->bulk_out_maxpacket;
+ if (rem > 0)
+ length += common->bulk_out_maxpacket - rem;
+ bh->outreq->length = length;
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct ums_board_info *ums_info;
+struct fsg_common *the_fsg_common;
+
+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
+{
+ const char *name;
+
+ if (ep == fsg->bulk_in)
+ name = "bulk-in";
+ else if (ep == fsg->bulk_out)
+ name = "bulk-out";
+ else
+ name = ep->name;
+ DBG(fsg, "%s set halt\n", name);
+ return usb_ep_set_halt(ep);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* These routines may be called in process context or in_irq */
+
+/* Caller must hold fsg->lock */
+static void wakeup_thread(struct fsg_common *common)
+{
+ common->thread_wakeup_needed = 1;
+}
+
+static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+{
+ /* Do nothing if a higher-priority exception is already in progress.
+ * If a lower-or-equal priority exception is in progress, preempt it
+ * and notify the main thread by sending it a signal. */
+ if (common->state <= new_state) {
+ common->exception_req_tag = common->ep0_req_tag;
+ common->state = new_state;
+ common->thread_wakeup_needed = 1;
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ep0_queue(struct fsg_common *common)
+{
+ int rc;
+
+ rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
+ common->ep0->driver_data = common;
+ if (rc != 0 && rc != -ESHUTDOWN) {
+ /* We can't do much more than wait for a reset */
+ WARNING(common, "error in submission: %s --> %d\n",
+ common->ep0->name, rc);
+ }
+ return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Bulk and interrupt endpoint completion handlers.
+ * These always run in_irq. */
+
+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_common *common = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
+
+ if (req->status || req->actual != req->length)
+ DBG(common, "%s --> %d, %u/%u\n", __func__,
+ req->status, req->actual, req->length);
+ if (req->status == -ECONNRESET) /* Request was cancelled */
+ usb_ep_fifo_flush(ep);
+
+ /* Hold the lock while we update the request and buffer states */
+ bh->inreq_busy = 0;
+ bh->state = BUF_STATE_EMPTY;
+ wakeup_thread(common);
+}
+
+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_common *common = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
+
+ dump_msg(common, "bulk-out", req->buf, req->actual);
+ if (req->status || req->actual != bh->bulk_out_intended_length)
+ DBG(common, "%s --> %d, %u/%u\n", __func__,
+ req->status, req->actual,
+ bh->bulk_out_intended_length);
+ if (req->status == -ECONNRESET) /* Request was cancelled */
+ usb_ep_fifo_flush(ep);
+
+ /* Hold the lock while we update the request and buffer states */
+ bh->outreq_busy = 0;
+ bh->state = BUF_STATE_FULL;
+ wakeup_thread(common);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Ep0 class-specific handlers. These always run in_irq. */
+
+static int fsg_setup(struct usb_function *f,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct fsg_dev *fsg = fsg_from_func(f);
+ struct usb_request *req = fsg->common->ep0req;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ if (!fsg_is_set(fsg->common))
+ return -EOPNOTSUPP;
+
+ switch (ctrl->bRequest) {
+
+ case USB_BULK_RESET_REQUEST:
+ if (ctrl->bRequestType !=
+ (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != fsg->interface_number || w_value != 0)
+ return -EDOM;
+
+ /* Raise an exception to stop the current operation
+ * and reinitialize our state. */
+ DBG(fsg, "bulk reset request\n");
+ raise_exception(fsg->common, FSG_STATE_RESET);
+ return DELAYED_STATUS;
+
+ case USB_BULK_GET_MAX_LUN_REQUEST:
+ if (ctrl->bRequestType !=
+ (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != fsg->interface_number || w_value != 0)
+ return -EDOM;
+ VDBG(fsg, "get max LUN\n");
+ *(u8 *) req->buf = fsg->common->nluns - 1;
+
+ /* Respond with data/status */
+ req->length = min((u16)1, w_length);
+ return ep0_queue(fsg->common);
+ }
+
+ VDBG(fsg,
+ "unknown class-specific control req "
+ "%02x.%02x v%04x i%04x l%u\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ le16_to_cpu(ctrl->wValue), w_index, w_length);
+ return -EOPNOTSUPP;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* All the following routines run in process context */
+
+/* Use this for bulk or interrupt transfers, not ep0 */
+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
+ struct usb_request *req, int *pbusy,
+ enum fsg_buffer_state *state)
+{
+ int rc;
+
+ if (ep == fsg->bulk_in)
+ dump_msg(fsg, "bulk-in", req->buf, req->length);
+
+ *pbusy = 1;
+ *state = BUF_STATE_BUSY;
+ rc = usb_ep_queue(ep, req, GFP_KERNEL);
+ if (rc != 0) {
+ *pbusy = 0;
+ *state = BUF_STATE_EMPTY;
+
+ /* We can't do much more than wait for a reset */
+
+ /* Note: currently the net2280 driver fails zero-length
+ * submissions if DMA is enabled. */
+ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
+ req->length == 0))
+ WARNING(fsg, "error in submission: %s --> %d\n",
+ ep->name, rc);
+ }
+}
+
+#define START_TRANSFER_OR(common, ep_name, req, pbusy, state) \
+ if (fsg_is_set(common)) \
+ start_transfer((common)->fsg, (common)->fsg->ep_name, \
+ req, pbusy, state); \
+ else
+
+#define START_TRANSFER(common, ep_name, req, pbusy, state) \
+ START_TRANSFER_OR(common, ep_name, req, pbusy, state) (void)0
+
+static void busy_indicator(void)
+{
+ static int state;
+
+ switch (state) {
+ case 0:
+ puts("\r|"); break;
+ case 1:
+ puts("\r/"); break;
+ case 2:
+ puts("\r-"); break;
+ case 3:
+ puts("\r\\"); break;
+ case 4:
+ puts("\r|"); break;
+ case 5:
+ puts("\r/"); break;
+ case 6:
+ puts("\r-"); break;
+ case 7:
+ puts("\r\\"); break;
+ default:
+ state = 0;
+ }
+ if (state++ == 8)
+ state = 0;
+}
+
+static int sleep_thread(struct fsg_common *common)
+{
+ int rc = 0;
+ int i = 0, k = 0;
+
+ /* Wait until a signal arrives or we are woken up */
+ for (;;) {
+ if (common->thread_wakeup_needed)
+ break;
+
+ if (++i == 50000) {
+ busy_indicator();
+ i = 0;
+ k++;
+ }
+
+ usb_gadget_handle_interrupts();
+ }
+ common->thread_wakeup_needed = 0;
+ return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int do_read(struct fsg_common *common)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ u32 lba;
+ struct fsg_buffhd *bh;
+ int rc;
+ u32 amount_left;
+ loff_t file_offset;
+ unsigned int amount;
+ unsigned int partial_page;
+ ssize_t nread;
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ if (common->cmnd[0] == SC_READ_6)
+ lba = get_unaligned_be24(&common->cmnd[1]);
+ else {
+ lba = get_unaligned_be32(&common->cmnd[2]);
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) and FUA (Force Unit Access = don't read from the
+ * cache), but we don't implement them. */
+ if ((common->cmnd[1] & ~0x18) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+ file_offset = ((loff_t) lba) << 9;
+
+ /* Carry out the file reads */
+ amount_left = common->data_size_from_cmnd;
+ if (unlikely(amount_left == 0))
+ return -EIO; /* No default reply */
+
+ for (;;) {
+
+ /* Figure out how much we need to read:
+ * Try to read the remaining amount.
+ * But don't read more than the buffer size.
+ * And don't try to read past the end of the file.
+ * Finally, if we're not at a page boundary, don't read past
+ * the next page.
+ * If this means reading 0 then we were asked to read past
+ * the end of file. */
+ amount = min(amount_left, FSG_BUFLEN);
+ partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
+ if (partial_page > 0)
+ amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
+ partial_page);
+
+ /* Wait for the next buffer to become available */
+ bh = common->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+
+ /* If we were asked to read past the end of file,
+ * end with an empty buffer. */
+ if (amount == 0) {
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->info_valid = 1;
+ bh->inreq->length = 0;
+ bh->state = BUF_STATE_FULL;
+ break;
+ }
+
+ /* Perform the read */
+ nread = 0;
+ rc = ums_info->read_sector(&(ums_info->ums_dev),
+ file_offset / SECTOR_SIZE,
+ amount / SECTOR_SIZE,
+ (char __user *)bh->buf);
+ if (rc)
+ return -EIO;
+ nread = amount;
+
+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nread);
+
+ if (nread < 0) {
+ LDBG(curlun, "error in file read: %d\n",
+ (int) nread);
+ nread = 0;
+ } else if (nread < amount) {
+ LDBG(curlun, "partial file read: %d/%u\n",
+ (int) nread, amount);
+ nread -= (nread & 511); /* Round down to a block */
+ }
+ file_offset += nread;
+ amount_left -= nread;
+ common->residue -= nread;
+ bh->inreq->length = nread;
+ bh->state = BUF_STATE_FULL;
+
+ /* If an error occurred, report it and its position */
+ if (nread < amount) {
+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ if (amount_left == 0)
+ break; /* No more left to read */
+
+ /* Send this buffer and go read some more */
+ bh->inreq->zero = 0;
+ START_TRANSFER_OR(common, bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state)
+ /* Don't know what to do if
+ * common->fsg is NULL */
+ return -EIO;
+ common->next_buffhd_to_fill = bh->next;
+ }
+
+ return -EIO; /* No default reply */
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int do_write(struct fsg_common *common)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ u32 lba;
+ struct fsg_buffhd *bh;
+ int get_some_more;
+ u32 amount_left_to_req, amount_left_to_write;
+ loff_t usb_offset, file_offset;
+ unsigned int amount;
+ unsigned int partial_page;
+ ssize_t nwritten;
+ int rc;
+
+ if (curlun->ro) {
+ curlun->sense_data = SS_WRITE_PROTECTED;
+ return -EINVAL;
+ }
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ if (common->cmnd[0] == SC_WRITE_6)
+ lba = get_unaligned_be24(&common->cmnd[1]);
+ else {
+ lba = get_unaligned_be32(&common->cmnd[2]);
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) and FUA (Force Unit Access = write directly to the
+ * medium). We don't implement DPO; we implement FUA by
+ * performing synchronous output. */
+ if (common->cmnd[1] & ~0x18) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /* Carry out the file writes */
+ get_some_more = 1;
+ file_offset = usb_offset = ((loff_t) lba) << 9;
+ amount_left_to_req = common->data_size_from_cmnd;
+ amount_left_to_write = common->data_size_from_cmnd;
+
+ while (amount_left_to_write > 0) {
+
+ /* Queue a request for more data from the host */
+ bh = common->next_buffhd_to_fill;
+ if (bh->state == BUF_STATE_EMPTY && get_some_more) {
+
+ /* Figure out how much we want to get:
+ * Try to get the remaining amount.
+ * But don't get more than the buffer size.
+ * And don't try to go past the end of the file.
+ * If we're not at a page boundary,
+ * don't go past the next page.
+ * If this means getting 0, then we were asked
+ * to write past the end of file.
+ * Finally, round down to a block boundary. */
+ amount = min(amount_left_to_req, FSG_BUFLEN);
+ partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
+ if (partial_page > 0)
+ amount = min(amount,
+ (unsigned int) PAGE_CACHE_SIZE - partial_page);
+
+ if (amount == 0) {
+ get_some_more = 0;
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->info_valid = 1;
+ continue;
+ }
+ amount -= (amount & 511);
+ if (amount == 0) {
+
+ /* Why were we were asked to transfer a
+ * partial block? */
+ get_some_more = 0;
+ continue;
+ }
+
+ /* Get the next buffer */
+ usb_offset += amount;
+ common->usb_amount_left -= amount;
+ amount_left_to_req -= amount;
+ if (amount_left_to_req == 0)
+ get_some_more = 0;
+
+ /* amount is always divisible by 512, hence by
+ * the bulk-out maxpacket size */
+ bh->outreq->length = amount;
+ bh->bulk_out_intended_length = amount;
+ bh->outreq->short_not_ok = 1;
+ START_TRANSFER_OR(common, bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state)
+ /* Don't know what to do if
+ * common->fsg is NULL */
+ return -EIO;
+ common->next_buffhd_to_fill = bh->next;
+ continue;
+ }
+
+ /* Write the received data to the backing file */
+ bh = common->next_buffhd_to_drain;
+ if (bh->state == BUF_STATE_EMPTY && !get_some_more)
+ break; /* We stopped early */
+ if (bh->state == BUF_STATE_FULL) {
+ common->next_buffhd_to_drain = bh->next;
+ bh->state = BUF_STATE_EMPTY;
+
+ /* Did something go wrong with the transfer? */
+ if (bh->outreq->status != 0) {
+ curlun->sense_data = SS_COMMUNICATION_FAILURE;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ amount = bh->outreq->actual;
+
+ /* Perform the write */
+ rc = ums_info->write_sector(&(ums_info->ums_dev),
+ file_offset / SECTOR_SIZE,
+ amount / SECTOR_SIZE,
+ (char __user *)bh->buf);
+ if (rc)
+ return -EIO;
+ nwritten = amount;
+
+ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nwritten);
+
+ if (nwritten < 0) {
+ LDBG(curlun, "error in file write: %d\n",
+ (int) nwritten);
+ nwritten = 0;
+ } else if (nwritten < amount) {
+ LDBG(curlun, "partial file write: %d/%u\n",
+ (int) nwritten, amount);
+ nwritten -= (nwritten & 511);
+ /* Round down to a block */
+ }
+ file_offset += nwritten;
+ amount_left_to_write -= nwritten;
+ common->residue -= nwritten;
+
+ /* If an error occurred, report it and its position */
+ if (nwritten < amount) {
+ curlun->sense_data = SS_WRITE_ERROR;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ /* Did the host decide to stop early? */
+ if (bh->outreq->actual != bh->outreq->length) {
+ common->short_packet_received = 1;
+ break;
+ }
+ continue;
+ }
+
+ /* Wait for something to happen */
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+
+ return -EIO; /* No default reply */
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int do_synchronize_cache(struct fsg_common *common)
+{
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int do_verify(struct fsg_common *common)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ u32 lba;
+ u32 verification_length;
+ struct fsg_buffhd *bh = common->next_buffhd_to_fill;
+ loff_t file_offset;
+ u32 amount_left;
+ unsigned int amount;
+ ssize_t nread;
+ int rc;
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ lba = get_unaligned_be32(&common->cmnd[2]);
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) but we don't implement it. */
+ if (common->cmnd[1] & ~0x10) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ verification_length = get_unaligned_be16(&common->cmnd[7]);
+ if (unlikely(verification_length == 0))
+ return -EIO; /* No default reply */
+
+ /* Prepare to carry out the file verify */
+ amount_left = verification_length << 9;
+ file_offset = ((loff_t) lba) << 9;
+
+ /* Write out all the dirty buffers before invalidating them */
+
+ /* Just try to read the requested blocks */
+ while (amount_left > 0) {
+
+ /* Figure out how much we need to read:
+ * Try to read the remaining amount, but not more than
+ * the buffer size.
+ * And don't try to read past the end of the file.
+ * If this means reading 0 then we were asked to read
+ * past the end of file. */
+ amount = min(amount_left, FSG_BUFLEN);
+ if (amount == 0) {
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ /* Perform the read */
+ nread = 0;
+ rc = ums_info->read_sector(&(ums_info->ums_dev),
+ file_offset / SECTOR_SIZE,
+ amount / SECTOR_SIZE,
+ (char __user *)bh->buf);
+ if (rc)
+ return -EIO;
+ nread = amount;
+
+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nread);
+ if (nread < 0) {
+ LDBG(curlun, "error in file verify: %d\n",
+ (int) nread);
+ nread = 0;
+ } else if (nread < amount) {
+ LDBG(curlun, "partial file verify: %d/%u\n",
+ (int) nread, amount);
+ nread -= (nread & 511); /* Round down to a sector */
+ }
+ if (nread == 0) {
+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+ curlun->info_valid = 1;
+ break;
+ }
+ file_offset += nread;
+ amount_left -= nread;
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ static const char vendor_id[] = "Linux ";
+ u8 *buf = (u8 *) bh->buf;
+
+ if (!curlun) { /* Unsupported LUNs are okay */
+ common->bad_lun_okay = 1;
+ memset(buf, 0, 36);
+ buf[0] = 0x7f; /* Unsupported, no device-type */
+ buf[4] = 31; /* Additional length */
+ return 36;
+ }
+
+ memset(buf, 0, 8);
+ buf[0] = TYPE_DISK;
+ buf[2] = 2; /* ANSI SCSI level 2 */
+ buf[3] = 2; /* SCSI-2 INQUIRY data format */
+ buf[4] = 31; /* Additional length */
+ /* No special options */
+ sprintf((char *) (buf + 8), "%-8s%-16s%04x", (char*) vendor_id ,
+ ums_info->name, (u16) 0xffff);
+
+ return 36;
+}
+
+
+static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ u8 *buf = (u8 *) bh->buf;
+ u32 sd, sdinfo;
+ int valid;
+
+ /*
+ * From the SCSI-2 spec., section 7.9 (Unit attention condition):
+ *
+ * If a REQUEST SENSE command is received from an initiator
+ * with a pending unit attention condition (before the target
+ * generates the contingent allegiance condition), then the
+ * target shall either:
+ * a) report any pending sense data and preserve the unit
+ * attention condition on the logical unit, or,
+ * b) report the unit attention condition, may discard any
+ * pending sense data, and clear the unit attention
+ * condition on the logical unit for that initiator.
+ *
+ * FSG normally uses option a); enable this code to use option b).
+ */
+#if 0
+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
+ curlun->sense_data = curlun->unit_attention_data;
+ curlun->unit_attention_data = SS_NO_SENSE;
+ }
+#endif
+
+ if (!curlun) { /* Unsupported LUNs are okay */
+ common->bad_lun_okay = 1;
+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+ sdinfo = 0;
+ valid = 0;
+ } else {
+ sd = curlun->sense_data;
+ valid = curlun->info_valid << 7;
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->info_valid = 0;
+ }
+
+ memset(buf, 0, 18);
+ buf[0] = valid | 0x70; /* Valid, current error */
+ buf[2] = SK(sd);
+ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
+ buf[7] = 18 - 8; /* Additional sense length */
+ buf[12] = ASC(sd);
+ buf[13] = ASCQ(sd);
+ return 18;
+}
+
+static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ u32 lba = get_unaligned_be32(&common->cmnd[2]);
+ int pmi = common->cmnd[8];
+ u8 *buf = (u8 *) bh->buf;
+
+ /* Check the PMI and LBA fields */
+ if (pmi > 1 || (pmi == 0 && lba != 0)) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
+ /* Max logical block */
+ put_unaligned_be32(512, &buf[4]); /* Block length */
+ return 8;
+}
+
+static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ int msf = common->cmnd[1] & 0x02;
+ u32 lba = get_unaligned_be32(&common->cmnd[2]);
+ u8 *buf = (u8 *) bh->buf;
+
+ if (common->cmnd[1] & ~0x02) { /* Mask away MSF */
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ memset(buf, 0, 8);
+ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */
+ store_cdrom_address(&buf[4], msf, lba);
+ return 8;
+}
+
+
+static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ int msf = common->cmnd[1] & 0x02;
+ int start_track = common->cmnd[6];
+ u8 *buf = (u8 *) bh->buf;
+
+ if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */
+ start_track > 1) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ memset(buf, 0, 20);
+ buf[1] = (20-2); /* TOC data length */
+ buf[2] = 1; /* First track number */
+ buf[3] = 1; /* Last track number */
+ buf[5] = 0x16; /* Data track, copying allowed */
+ buf[6] = 0x01; /* Only track is number 1 */
+ store_cdrom_address(&buf[8], msf, 0);
+
+ buf[13] = 0x16; /* Lead-out track is data */
+ buf[14] = 0xAA; /* Lead-out track number */
+ store_cdrom_address(&buf[16], msf, curlun->num_sectors);
+
+ return 20;
+}
+
+static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ int mscmnd = common->cmnd[0];
+ u8 *buf = (u8 *) bh->buf;
+ u8 *buf0 = buf;
+ int pc, page_code;
+ int changeable_values, all_pages;
+ int valid_page = 0;
+ int len, limit;
+
+ if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ pc = common->cmnd[2] >> 6;
+ page_code = common->cmnd[2] & 0x3f;
+ if (pc == 3) {
+ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
+ return -EINVAL;
+ }
+ changeable_values = (pc == 1);
+ all_pages = (page_code == 0x3f);
+
+ /* Write the mode parameter header. Fixed values are: default
+ * medium type, no cache control (DPOFUA), and no block descriptors.
+ * The only variable value is the WriteProtect bit. We will fill in
+ * the mode data length later. */
+ memset(buf, 0, 8);
+ if (mscmnd == SC_MODE_SENSE_6) {
+ buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
+ buf += 4;
+ limit = 255;
+ } else { /* SC_MODE_SENSE_10 */
+ buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
+ buf += 8;
+ limit = 65535; /* Should really be FSG_BUFLEN */
+ }
+
+ /* No block descriptors */
+
+ /* The mode pages, in numerical order. The only page we support
+ * is the Caching page. */
+ if (page_code == 0x08 || all_pages) {
+ valid_page = 1;
+ buf[0] = 0x08; /* Page code */
+ buf[1] = 10; /* Page length */
+ memset(buf+2, 0, 10); /* None of the fields are changeable */
+
+ if (!changeable_values) {
+ buf[2] = 0x04; /* Write cache enable, */
+ /* Read cache not disabled */
+ /* No cache retention priorities */
+ put_unaligned_be16(0xffff, &buf[4]);
+ /* Don't disable prefetch */
+ /* Minimum prefetch = 0 */
+ put_unaligned_be16(0xffff, &buf[8]);
+ /* Maximum prefetch */
+ put_unaligned_be16(0xffff, &buf[10]);
+ /* Maximum prefetch ceiling */
+ }
+ buf += 12;
+ }
+
+ /* Check that a valid page was requested and the mode data length
+ * isn't too long. */
+ len = buf - buf0;
+ if (!valid_page || len > limit) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ /* Store the mode data length */
+ if (mscmnd == SC_MODE_SENSE_6)
+ buf0[0] = len - 1;
+ else
+ put_unaligned_be16(len - 2, buf0);
+ return len;
+}
+
+
+static int do_start_stop(struct fsg_common *common)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+
+ if (!curlun) {
+ return -EINVAL;
+ } else if (!curlun->removable) {
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int do_prevent_allow(struct fsg_common *common)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ int prevent;
+
+ if (!curlun->removable) {
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+ }
+
+ prevent = common->cmnd[4] & 0x01;
+ if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ if (curlun->prevent_medium_removal && !prevent)
+ fsg_lun_fsync_sub(curlun);
+ curlun->prevent_medium_removal = prevent;
+ return 0;
+}
+
+
+static int do_read_format_capacities(struct fsg_common *common,
+ struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ u8 *buf = (u8 *) bh->buf;
+
+ buf[0] = buf[1] = buf[2] = 0;
+ buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */
+ buf += 4;
+
+ put_unaligned_be32(curlun->num_sectors, &buf[0]);
+ /* Number of blocks */
+ put_unaligned_be32(512, &buf[4]); /* Block length */
+ buf[4] = 0x02; /* Current capacity */
+ return 12;
+}
+
+
+static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+
+ /* We don't support MODE SELECT */
+ if (curlun)
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+ int rc;
+
+ rc = fsg_set_halt(fsg, fsg->bulk_in);
+ if (rc == -EAGAIN)
+ VDBG(fsg, "delayed bulk-in endpoint halt\n");
+ while (rc != 0) {
+ if (rc != -EAGAIN) {
+ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
+ rc = 0;
+ break;
+ }
+
+ rc = usb_ep_set_halt(fsg->bulk_in);
+ }
+ return rc;
+}
+
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+ int rc;
+
+ DBG(fsg, "bulk-in set wedge\n");
+ rc = 0; /* usb_ep_set_wedge(fsg->bulk_in); */
+ if (rc == -EAGAIN)
+ VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+ while (rc != 0) {
+ if (rc != -EAGAIN) {
+ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
+ rc = 0;
+ break;
+ }
+ }
+ return rc;
+}
+
+static int pad_with_zeros(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh = fsg->common->next_buffhd_to_fill;
+ u32 nkeep = bh->inreq->length;
+ u32 nsend;
+ int rc;
+
+ bh->state = BUF_STATE_EMPTY; /* For the first iteration */
+ fsg->common->usb_amount_left = nkeep + fsg->common->residue;
+ while (fsg->common->usb_amount_left > 0) {
+
+ /* Wait for the next buffer to be free */
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(fsg->common);
+ if (rc)
+ return rc;
+ }
+
+ nsend = min(fsg->common->usb_amount_left, FSG_BUFLEN);
+ memset(bh->buf + nkeep, 0, nsend - nkeep);
+ bh->inreq->length = nsend;
+ bh->inreq->zero = 0;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ bh = fsg->common->next_buffhd_to_fill = bh->next;
+ fsg->common->usb_amount_left -= nsend;
+ nkeep = 0;
+ }
+ return 0;
+}
+
+static int throw_away_data(struct fsg_common *common)
+{
+ struct fsg_buffhd *bh;
+ u32 amount;
+ int rc;
+
+ for (bh = common->next_buffhd_to_drain;
+ bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
+ bh = common->next_buffhd_to_drain) {
+
+ /* Throw away the data in a filled buffer */
+ if (bh->state == BUF_STATE_FULL) {
+ bh->state = BUF_STATE_EMPTY;
+ common->next_buffhd_to_drain = bh->next;
+
+ /* A short packet or an error ends everything */
+ if (bh->outreq->actual != bh->outreq->length ||
+ bh->outreq->status != 0) {
+ raise_exception(common,
+ FSG_STATE_ABORT_BULK_OUT);
+ return -EINTR;
+ }
+ continue;
+ }
+
+ /* Try to submit another request if we need one */
+ bh = common->next_buffhd_to_fill;
+ if (bh->state == BUF_STATE_EMPTY
+ && common->usb_amount_left > 0) {
+ amount = min(common->usb_amount_left, FSG_BUFLEN);
+
+ /* amount is always divisible by 512, hence by
+ * the bulk-out maxpacket size */
+ bh->outreq->length = amount;
+ bh->bulk_out_intended_length = amount;
+ bh->outreq->short_not_ok = 1;
+ START_TRANSFER_OR(common, bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state)
+ /* Don't know what to do if
+ * common->fsg is NULL */
+ return -EIO;
+ common->next_buffhd_to_fill = bh->next;
+ common->usb_amount_left -= amount;
+ continue;
+ }
+
+ /* Otherwise wait for something to happen */
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+ return 0;
+}
+
+
+static int finish_reply(struct fsg_common *common)
+{
+ struct fsg_buffhd *bh = common->next_buffhd_to_fill;
+ int rc = 0;
+
+ switch (common->data_dir) {
+ case DATA_DIR_NONE:
+ break; /* Nothing to send */
+
+ /* If we don't know whether the host wants to read or write,
+ * this must be CB or CBI with an unknown command. We mustn't
+ * try to send or receive any data. So stall both bulk pipes
+ * if we can and wait for a reset. */
+ case DATA_DIR_UNKNOWN:
+ if (!common->can_stall) {
+ /* Nothing */
+ } else if (fsg_is_set(common)) {
+ fsg_set_halt(common->fsg, common->fsg->bulk_out);
+ rc = halt_bulk_in_endpoint(common->fsg);
+ } else {
+ /* Don't know what to do if common->fsg is NULL */
+ rc = -EIO;
+ }
+ break;
+
+ /* All but the last buffer of data must have already been sent */
+ case DATA_DIR_TO_HOST:
+ if (common->data_size == 0) {
+ /* Nothing to send */
+
+ /* If there's no residue, simply send the last buffer */
+ } else if (common->residue == 0) {
+ bh->inreq->zero = 0;
+ START_TRANSFER_OR(common, bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state)
+ return -EIO;
+ common->next_buffhd_to_fill = bh->next;
+
+ /* For Bulk-only, if we're allowed to stall then send the
+ * short packet and halt the bulk-in endpoint. If we can't
+ * stall, pad out the remaining data with 0's. */
+ } else if (common->can_stall) {
+ bh->inreq->zero = 1;
+ START_TRANSFER_OR(common, bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state)
+ /* Don't know what to do if
+ * common->fsg is NULL */
+ rc = -EIO;
+ common->next_buffhd_to_fill = bh->next;
+ if (common->fsg)
+ rc = halt_bulk_in_endpoint(common->fsg);
+ } else if (fsg_is_set(common)) {
+ rc = pad_with_zeros(common->fsg);
+ } else {
+ /* Don't know what to do if common->fsg is NULL */
+ rc = -EIO;
+ }
+ break;
+
+ /* We have processed all we want from the data the host has sent.
+ * There may still be outstanding bulk-out requests. */
+ case DATA_DIR_FROM_HOST:
+ if (common->residue == 0) {
+ /* Nothing to receive */
+
+ /* Did the host stop sending unexpectedly early? */
+ } else if (common->short_packet_received) {
+ raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+ rc = -EINTR;
+
+ /* We haven't processed all the incoming data. Even though
+ * we may be allowed to stall, doing so would cause a race.
+ * The controller may already have ACK'ed all the remaining
+ * bulk-out packets, in which case the host wouldn't see a
+ * STALL. Not realizing the endpoint was halted, it wouldn't
+ * clear the halt -- leading to problems later on. */
+#if 0
+ } else if (common->can_stall) {
+ if (fsg_is_set(common))
+ fsg_set_halt(common->fsg,
+ common->fsg->bulk_out);
+ raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
+ rc = -EINTR;
+#endif
+
+ /* We can't stall. Read in the excess data and throw it
+ * all away. */
+ } else {
+ rc = throw_away_data(common);
+ }
+ break;
+ }
+ return rc;
+}
+
+
+static int send_status(struct fsg_common *common)
+{
+ struct fsg_lun *curlun = &common->luns[common->lun];
+ struct fsg_buffhd *bh;
+ struct bulk_cs_wrap *csw;
+ int rc;
+ u8 status = USB_STATUS_PASS;
+ u32 sd, sdinfo = 0;
+
+ /* Wait for the next buffer to become available */
+ bh = common->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+
+ if (curlun)
+ sd = curlun->sense_data;
+ else if (common->bad_lun_okay)
+ sd = SS_NO_SENSE;
+ else
+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+
+ if (common->phase_error) {
+ DBG(common, "sending phase-error status\n");
+ status = USB_STATUS_PHASE_ERROR;
+ sd = SS_INVALID_COMMAND;
+ } else if (sd != SS_NO_SENSE) {
+ DBG(common, "sending command-failure status\n");
+ status = USB_STATUS_FAIL;
+ VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
+ " info x%x\n",
+ SK(sd), ASC(sd), ASCQ(sd), sdinfo);
+ }
+
+ /* Store and send the Bulk-only CSW */
+ csw = (void *)bh->buf;
+
+ csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
+ csw->Tag = common->tag;
+ csw->Residue = cpu_to_le32(common->residue);
+ csw->Status = status;
+
+ bh->inreq->length = USB_BULK_CS_WRAP_LEN;
+ bh->inreq->zero = 0;
+ START_TRANSFER_OR(common, bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state)
+ /* Don't know what to do if common->fsg is NULL */
+ return -EIO;
+
+ common->next_buffhd_to_fill = bh->next;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have. */
+static int check_command(struct fsg_common *common, int cmnd_size,
+ enum data_direction data_dir, unsigned int mask,
+ int needs_medium, const char *name)
+{
+ int i;
+ int lun = common->cmnd[1] >> 5;
+ static const char dirletter[4] = {'u', 'o', 'i', 'n'};
+ char hdlen[20];
+ struct fsg_lun *curlun;
+
+ hdlen[0] = 0;
+ if (common->data_dir != DATA_DIR_UNKNOWN)
+ sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
+ common->data_size);
+ VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
+ name, cmnd_size, dirletter[(int) data_dir],
+ common->data_size_from_cmnd, common->cmnd_size, hdlen);
+
+ /* We can't reply at all until we know the correct data direction
+ * and size. */
+ if (common->data_size_from_cmnd == 0)
+ data_dir = DATA_DIR_NONE;
+ if (common->data_size < common->data_size_from_cmnd) {
+ /* Host data size < Device data size is a phase error.
+ * Carry out the command, but only transfer as much as
+ * we are allowed. */
+ common->data_size_from_cmnd = common->data_size;
+ common->phase_error = 1;
+ }
+ common->residue = common->data_size;
+ common->usb_amount_left = common->data_size;
+
+ /* Conflicting data directions is a phase error */
+ if (common->data_dir != data_dir
+ && common->data_size_from_cmnd > 0) {
+ common->phase_error = 1;
+ return -EINVAL;
+ }
+
+ /* Verify the length of the command itself */
+ if (cmnd_size != common->cmnd_size) {
+
+ /* Special case workaround: There are plenty of buggy SCSI
+ * implementations. Many have issues with cbw->Length
+ * field passing a wrong command size. For those cases we
+ * always try to work around the problem by using the length
+ * sent by the host side provided it is at least as large
+ * as the correct command length.
+ * Examples of such cases would be MS-Windows, which issues
+ * REQUEST SENSE with cbw->Length == 12 where it should
+ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
+ * REQUEST SENSE with cbw->Length == 10 where it should
+ * be 6 as well.
+ */
+ if (cmnd_size <= common->cmnd_size) {
+ DBG(common, "%s is buggy! Expected length %d "
+ "but we got %d\n", name,
+ cmnd_size, common->cmnd_size);
+ cmnd_size = common->cmnd_size;
+ } else {
+ common->phase_error = 1;
+ return -EINVAL;
+ }
+ }
+
+ /* Check that the LUN values are consistent */
+ if (common->lun != lun)
+ DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n",
+ common->lun, lun);
+
+ /* Check the LUN */
+ if (common->lun >= 0 && common->lun < common->nluns) {
+ curlun = &common->luns[common->lun];
+ if (common->cmnd[0] != SC_REQUEST_SENSE) {
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->info_valid = 0;
+ }
+ } else {
+ curlun = NULL;
+ common->bad_lun_okay = 0;
+
+ /* INQUIRY and REQUEST SENSE commands are explicitly allowed
+ * to use unsupported LUNs; all others may not. */
+ if (common->cmnd[0] != SC_INQUIRY &&
+ common->cmnd[0] != SC_REQUEST_SENSE) {
+ DBG(common, "unsupported LUN %d\n", common->lun);
+ return -EINVAL;
+ }
+ }
+#if 0
+ /* If a unit attention condition exists, only INQUIRY and
+ * REQUEST SENSE commands are allowed; anything else must fail. */
+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
+ common->cmnd[0] != SC_INQUIRY &&
+ common->cmnd[0] != SC_REQUEST_SENSE) {
+ curlun->sense_data = curlun->unit_attention_data;
+ curlun->unit_attention_data = SS_NO_SENSE;
+ return -EINVAL;
+ }
+#endif
+ /* Check that only command bytes listed in the mask are non-zero */
+ common->cmnd[1] &= 0x1f; /* Mask away the LUN */
+ for (i = 1; i < cmnd_size; ++i) {
+ if (common->cmnd[i] && !(mask & (1 << i))) {
+ if (curlun)
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+
+static int do_scsi_command(struct fsg_common *common)
+{
+ struct fsg_buffhd *bh;
+ int rc;
+ int reply = -EINVAL;
+ int i;
+ static char unknown[16];
+ struct fsg_lun *curlun = &common->luns[common->lun];
+
+ dump_cdb(common);
+
+ /* Wait for the next buffer to become available for data or status */
+ bh = common->next_buffhd_to_fill;
+ common->next_buffhd_to_drain = bh;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+ common->phase_error = 0;
+ common->short_packet_received = 0;
+
+ down_read(&common->filesem); /* We're using the backing file */
+ switch (common->cmnd[0]) {
+
+ case SC_INQUIRY:
+ common->data_size_from_cmnd = common->cmnd[4];
+ reply = check_command(common, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "INQUIRY");
+ if (reply == 0)
+ reply = do_inquiry(common, bh);
+ break;
+
+ case SC_MODE_SELECT_6:
+ common->data_size_from_cmnd = common->cmnd[4];
+ reply = check_command(common, 6, DATA_DIR_FROM_HOST,
+ (1<<1) | (1<<4), 0,
+ "MODE SELECT(6)");
+ if (reply == 0)
+ reply = do_mode_select(common, bh);
+ break;
+
+ case SC_MODE_SELECT_10:
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]);
+ reply = check_command(common, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (3<<7), 0,
+ "MODE SELECT(10)");
+ if (reply == 0)
+ reply = do_mode_select(common, bh);
+ break;
+
+ case SC_MODE_SENSE_6:
+ common->data_size_from_cmnd = common->cmnd[4];
+ reply = check_command(common, 6, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (1<<4), 0,
+ "MODE SENSE(6)");
+ if (reply == 0)
+ reply = do_mode_sense(common, bh);
+ break;
+
+ case SC_MODE_SENSE_10:
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]);
+ reply = check_command(common, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (3<<7), 0,
+ "MODE SENSE(10)");
+ if (reply == 0)
+ reply = do_mode_sense(common, bh);
+ break;
+
+ case SC_PREVENT_ALLOW_MEDIUM_REMOVAL:
+ common->data_size_from_cmnd = 0;
+ reply = check_command(common, 6, DATA_DIR_NONE,
+ (1<<4), 0,
+ "PREVENT-ALLOW MEDIUM REMOVAL");
+ if (reply == 0)
+ reply = do_prevent_allow(common);
+ break;
+
+ case SC_READ_6:
+ i = common->cmnd[4];
+ common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ reply = check_command(common, 6, DATA_DIR_TO_HOST,
+ (7<<1) | (1<<4), 1,
+ "READ(6)");
+ if (reply == 0)
+ reply = do_read(common);
+ break;
+
+ case SC_READ_10:
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]) << 9;
+ reply = check_command(common, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "READ(10)");
+ if (reply == 0)
+ reply = do_read(common);
+ break;
+
+ case SC_READ_12:
+ common->data_size_from_cmnd =
+ get_unaligned_be32(&common->cmnd[6]) << 9;
+ reply = check_command(common, 12, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "READ(12)");
+ if (reply == 0)
+ reply = do_read(common);
+ break;
+
+ case SC_READ_CAPACITY:
+ common->data_size_from_cmnd = 8;
+ reply = check_command(common, 10, DATA_DIR_TO_HOST,
+ (0xf<<2) | (1<<8), 1,
+ "READ CAPACITY");
+ if (reply == 0)
+ reply = do_read_capacity(common, bh);
+ break;
+
+ case SC_READ_HEADER:
+ if (!common->luns[common->lun].cdrom)
+ goto unknown_cmnd;
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]);
+ reply = check_command(common, 10, DATA_DIR_TO_HOST,
+ (3<<7) | (0x1f<<1), 1,
+ "READ HEADER");
+ if (reply == 0)
+ reply = do_read_header(common, bh);
+ break;
+
+ case SC_READ_TOC:
+ if (!common->luns[common->lun].cdrom)
+ goto unknown_cmnd;
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]);
+ reply = check_command(common, 10, DATA_DIR_TO_HOST,
+ (7<<6) | (1<<1), 1,
+ "READ TOC");
+ if (reply == 0)
+ reply = do_read_toc(common, bh);
+ break;
+
+ case SC_READ_FORMAT_CAPACITIES:
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]);
+ reply = check_command(common, 10, DATA_DIR_TO_HOST,
+ (3<<7), 1,
+ "READ FORMAT CAPACITIES");
+ if (reply == 0)
+ reply = do_read_format_capacities(common, bh);
+ break;
+
+ case SC_REQUEST_SENSE:
+ common->data_size_from_cmnd = common->cmnd[4];
+ reply = check_command(common, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "REQUEST SENSE");
+ if (reply == 0)
+ reply = do_request_sense(common, bh);
+ break;
+
+ case SC_START_STOP_UNIT:
+ common->data_size_from_cmnd = 0;
+ reply = check_command(common, 6, DATA_DIR_NONE,
+ (1<<1) | (1<<4), 0,
+ "START-STOP UNIT");
+ if (reply == 0)
+ reply = do_start_stop(common);
+ break;
+
+ case SC_SYNCHRONIZE_CACHE:
+ common->data_size_from_cmnd = 0;
+ reply = check_command(common, 10, DATA_DIR_NONE,
+ (0xf<<2) | (3<<7), 1,
+ "SYNCHRONIZE CACHE");
+ if (reply == 0)
+ reply = do_synchronize_cache(common);
+ break;
+
+ case SC_TEST_UNIT_READY:
+ common->data_size_from_cmnd = 0;
+ reply = check_command(common, 6, DATA_DIR_NONE,
+ 0, 1,
+ "TEST UNIT READY");
+ break;
+
+ /* Although optional, this command is used by MS-Windows. We
+ * support a minimal version: BytChk must be 0. */
+ case SC_VERIFY:
+ common->data_size_from_cmnd = 0;
+ reply = check_command(common, 10, DATA_DIR_NONE,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "VERIFY");
+ if (reply == 0)
+ reply = do_verify(common);
+ break;
+
+ case SC_WRITE_6:
+ i = common->cmnd[4];
+ common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ reply = check_command(common, 6, DATA_DIR_FROM_HOST,
+ (7<<1) | (1<<4), 1,
+ "WRITE(6)");
+ if (reply == 0)
+ reply = do_write(common);
+ break;
+
+ case SC_WRITE_10:
+ common->data_size_from_cmnd =
+ get_unaligned_be16(&common->cmnd[7]) << 9;
+ reply = check_command(common, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "WRITE(10)");
+ if (reply == 0)
+ reply = do_write(common);
+ break;
+
+ case SC_WRITE_12:
+ common->data_size_from_cmnd =
+ get_unaligned_be32(&common->cmnd[6]) << 9;
+ reply = check_command(common, 12, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "WRITE(12)");
+ if (reply == 0)
+ reply = do_write(common);
+ break;
+
+ /* Some mandatory commands that we recognize but don't implement.
+ * They don't mean much in this setting. It's left as an exercise
+ * for anyone interested to implement RESERVE and RELEASE in terms
+ * of Posix locks. */
+ case SC_FORMAT_UNIT:
+ case SC_RELEASE:
+ case SC_RESERVE:
+ case SC_SEND_DIAGNOSTIC:
+ /* Fall through */
+
+ default:
+unknown_cmnd:
+ common->data_size_from_cmnd = 0;
+ sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
+ reply = check_command(common, common->cmnd_size,
+ DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+ if (reply == 0) {
+ curlun->sense_data = SS_INVALID_COMMAND;
+ reply = -EINVAL;
+ }
+ break;
+ }
+ up_read(&common->filesem);
+
+ if (reply == -EINTR)
+ return -EINTR;
+
+ /* Set up the single reply buffer for finish_reply() */
+ if (reply == -EINVAL)
+ reply = 0; /* Error reply length */
+ if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
+ reply = min((u32) reply, common->data_size_from_cmnd);
+ bh->inreq->length = reply;
+ bh->state = BUF_STATE_FULL;
+ common->residue -= reply;
+ } /* Otherwise it's already set */
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct usb_request *req = bh->outreq;
+ struct fsg_bulk_cb_wrap *cbw = req->buf;
+ struct fsg_common *common = fsg->common;
+
+ /* Was this a real packet? Should it be ignored? */
+ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
+ return -EINVAL;
+
+ /* Is the CBW valid? */
+ if (req->actual != USB_BULK_CB_WRAP_LEN ||
+ cbw->Signature != cpu_to_le32(
+ USB_BULK_CB_SIG)) {
+ DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
+ req->actual,
+ le32_to_cpu(cbw->Signature));
+
+ /* The Bulk-only spec says we MUST stall the IN endpoint
+ * (6.6.1), so it's unavoidable. It also says we must
+ * retain this state until the next reset, but there's
+ * no way to tell the controller driver it should ignore
+ * Clear-Feature(HALT) requests.
+ *
+ * We aren't required to halt the OUT endpoint; instead
+ * we can simply accept and discard any data received
+ * until the next reset. */
+ wedge_bulk_in_endpoint(fsg);
+ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+ return -EINVAL;
+ }
+
+ /* Is the CBW meaningful? */
+ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
+ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
+ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
+ "cmdlen %u\n",
+ cbw->Lun, cbw->Flags, cbw->Length);
+
+ /* We can do anything we want here, so let's stall the
+ * bulk pipes if we are allowed to. */
+ if (common->can_stall) {
+ fsg_set_halt(fsg, fsg->bulk_out);
+ halt_bulk_in_endpoint(fsg);
+ }
+ return -EINVAL;
+ }
+
+ /* Save the command for later */
+ common->cmnd_size = cbw->Length;
+ memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
+ if (cbw->Flags & USB_BULK_IN_FLAG)
+ common->data_dir = DATA_DIR_TO_HOST;
+ else
+ common->data_dir = DATA_DIR_FROM_HOST;
+ common->data_size = le32_to_cpu(cbw->DataTransferLength);
+ if (common->data_size == 0)
+ common->data_dir = DATA_DIR_NONE;
+ common->lun = cbw->Lun;
+ common->tag = cbw->Tag;
+ return 0;
+}
+
+
+static int get_next_command(struct fsg_common *common)
+{
+ struct fsg_buffhd *bh;
+ int rc = 0;
+
+ /* Wait for the next buffer to become available */
+ bh = common->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+
+ /* Queue a request to read a Bulk-only CBW */
+ set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
+ bh->outreq->short_not_ok = 1;
+ START_TRANSFER_OR(common, bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state)
+ /* Don't know what to do if common->fsg is NULL */
+ return -EIO;
+
+ /* We will drain the buffer in software, which means we
+ * can reuse it for the next filling. No need to advance
+ * next_buffhd_to_fill. */
+
+ /* Wait for the CBW to arrive */
+ while (bh->state != BUF_STATE_FULL) {
+ rc = sleep_thread(common);
+ if (rc)
+ return rc;
+ }
+
+ rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
+ bh->state = BUF_STATE_EMPTY;
+
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int enable_endpoint(struct fsg_common *common, struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *d)
+{
+ int rc;
+
+ ep->driver_data = common;
+ rc = usb_ep_enable(ep, d);
+ if (rc)
+ ERROR(common, "can't enable %s, result %d\n", ep->name, rc);
+ return rc;
+}
+
+static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
+ struct usb_request **preq)
+{
+ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (*preq)
+ return 0;
+ ERROR(common, "can't allocate request for %s\n", ep->name);
+ return -ENOMEM;
+}
+
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
+{
+ const struct usb_endpoint_descriptor *d;
+ struct fsg_dev *fsg;
+ int i, rc = 0;
+
+ if (common->running)
+ DBG(common, "reset interface\n");
+
+reset:
+ /* Deallocate the requests */
+ if (common->fsg) {
+ fsg = common->fsg;
+
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &common->buffhds[i];
+
+ if (bh->inreq) {
+ usb_ep_free_request(fsg->bulk_in, bh->inreq);
+ bh->inreq = NULL;
+ }
+ if (bh->outreq) {
+ usb_ep_free_request(fsg->bulk_out, bh->outreq);
+ bh->outreq = NULL;
+ }
+ }
+
+ /* Disable the endpoints */
+ if (fsg->bulk_in_enabled) {
+ usb_ep_disable(fsg->bulk_in);
+ fsg->bulk_in_enabled = 0;
+ }
+ if (fsg->bulk_out_enabled) {
+ usb_ep_disable(fsg->bulk_out);
+ fsg->bulk_out_enabled = 0;
+ }
+
+ common->fsg = NULL;
+ /* wake_up(&common->fsg_wait); */
+ }
+
+ common->running = 0;
+ if (!new_fsg || rc)
+ return rc;
+
+ common->fsg = new_fsg;
+ fsg = common->fsg;
+
+ /* Enable the endpoints */
+ d = fsg_ep_desc(common->gadget,
+ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+ rc = enable_endpoint(common, fsg->bulk_in, d);
+ if (rc)
+ goto reset;
+ fsg->bulk_in_enabled = 1;
+
+ d = fsg_ep_desc(common->gadget,
+ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+ rc = enable_endpoint(common, fsg->bulk_out, d);
+ if (rc)
+ goto reset;
+ fsg->bulk_out_enabled = 1;
+ common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+
+ /* Allocate the requests */
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &common->buffhds[i];
+
+ rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
+ if (rc)
+ goto reset;
+ rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
+ if (rc)
+ goto reset;
+ bh->inreq->buf = bh->outreq->buf = bh->buf;
+ bh->inreq->context = bh->outreq->context = bh;
+ bh->inreq->complete = bulk_in_complete;
+ bh->outreq->complete = bulk_out_complete;
+ }
+
+ common->running = 1;
+
+ return rc;
+}
+
+
+/****************************** ALT CONFIGS ******************************/
+
+
+static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct fsg_dev *fsg = fsg_from_func(f);
+ fsg->common->new_fsg = fsg;
+ raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ return 0;
+}
+
+static void fsg_disable(struct usb_function *f)
+{
+ struct fsg_dev *fsg = fsg_from_func(f);
+ fsg->common->new_fsg = NULL;
+ raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void handle_exception(struct fsg_common *common)
+{
+ int i;
+ struct fsg_buffhd *bh;
+ enum fsg_state old_state;
+ struct fsg_lun *curlun;
+ unsigned int exception_req_tag;
+
+ /* Cancel all the pending transfers */
+ if (common->fsg) {
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ bh = &common->buffhds[i];
+ if (bh->inreq_busy)
+ usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
+ if (bh->outreq_busy)
+ usb_ep_dequeue(common->fsg->bulk_out,
+ bh->outreq);
+ }
+
+ /* Wait until everything is idle */
+ for (;;) {
+ int num_active = 0;
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ bh = &common->buffhds[i];
+ num_active += bh->inreq_busy + bh->outreq_busy;
+ }
+ if (num_active == 0)
+ break;
+ if (sleep_thread(common))
+ return;
+ }
+
+ /* Clear out the controller's fifos */
+ if (common->fsg->bulk_in_enabled)
+ usb_ep_fifo_flush(common->fsg->bulk_in);
+ if (common->fsg->bulk_out_enabled)
+ usb_ep_fifo_flush(common->fsg->bulk_out);
+ }
+
+ /* Reset the I/O buffer states and pointers, the SCSI
+ * state, and the exception. Then invoke the handler. */
+
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ bh = &common->buffhds[i];
+ bh->state = BUF_STATE_EMPTY;
+ }
+ common->next_buffhd_to_fill = &common->buffhds[0];
+ common->next_buffhd_to_drain = &common->buffhds[0];
+ exception_req_tag = common->exception_req_tag;
+ old_state = common->state;
+
+ if (old_state == FSG_STATE_ABORT_BULK_OUT)
+ common->state = FSG_STATE_STATUS_PHASE;
+ else {
+ for (i = 0; i < common->nluns; ++i) {
+ curlun = &common->luns[i];
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->info_valid = 0;
+ }
+ common->state = FSG_STATE_IDLE;
+ }
+
+ /* Carry out any extra actions required for the exception */
+ switch (old_state) {
+ case FSG_STATE_ABORT_BULK_OUT:
+ send_status(common);
+
+ if (common->state == FSG_STATE_STATUS_PHASE)
+ common->state = FSG_STATE_IDLE;
+ break;
+
+ case FSG_STATE_RESET:
+ /* In case we were forced against our will to halt a
+ * bulk endpoint, clear the halt now. (The SuperH UDC
+ * requires this.) */
+ if (!fsg_is_set(common))
+ break;
+ if (test_and_clear_bit(IGNORE_BULK_OUT,
+ &common->fsg->atomic_bitflags))
+ usb_ep_clear_halt(common->fsg->bulk_in);
+
+ if (common->ep0_req_tag == exception_req_tag)
+ ep0_queue(common); /* Complete the status stage */
+
+ break;
+
+ case FSG_STATE_CONFIG_CHANGE:
+ do_set_interface(common, common->new_fsg);
+ break;
+
+ case FSG_STATE_EXIT:
+ case FSG_STATE_TERMINATED:
+ do_set_interface(common, NULL); /* Free resources */
+ common->state = FSG_STATE_TERMINATED; /* Stop the thread */
+ break;
+
+ case FSG_STATE_INTERFACE_CHANGE:
+ case FSG_STATE_DISCONNECT:
+ case FSG_STATE_COMMAND_PHASE:
+ case FSG_STATE_DATA_PHASE:
+ case FSG_STATE_STATUS_PHASE:
+ case FSG_STATE_IDLE:
+ break;
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+int fsg_main_thread(void *common_)
+{
+ struct fsg_common *common = the_fsg_common;
+ /* The main loop */
+ do {
+ if (exception_in_progress(common)) {
+ handle_exception(common);
+ continue;
+ }
+
+ if (!common->running) {
+ sleep_thread(common);
+ continue;
+ }
+
+ if (get_next_command(common))
+ continue;
+
+ if (!exception_in_progress(common))
+ common->state = FSG_STATE_DATA_PHASE;
+
+ if (do_scsi_command(common) || finish_reply(common))
+ continue;
+
+ if (!exception_in_progress(common))
+ common->state = FSG_STATE_STATUS_PHASE;
+
+ if (send_status(common))
+ continue;
+
+ if (!exception_in_progress(common))
+ common->state = FSG_STATE_IDLE;
+ } while (0);
+
+ common->thread_task = NULL;
+
+ return 0;
+}
+
+static void fsg_common_release(struct kref *ref);
+
+static struct fsg_common *fsg_common_init(struct fsg_common *common,
+ struct usb_composite_dev *cdev)
+{
+ struct usb_gadget *gadget = cdev->gadget;
+ struct fsg_buffhd *bh;
+ struct fsg_lun *curlun;
+ int nluns, i, rc;
+
+ /* Find out how many LUNs there should be */
+ nluns = 1;
+ if (nluns < 1 || nluns > FSG_MAX_LUNS) {
+ printf("invalid number of LUNs: %u\n", nluns);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Allocate? */
+ if (!common) {
+ common = calloc(sizeof *common, 1);
+ if (!common)
+ return ERR_PTR(-ENOMEM);
+ common->free_storage_on_release = 1;
+ } else {
+ memset(common, 0, sizeof common);
+ common->free_storage_on_release = 0;
+ }
+
+ common->ops = NULL;
+ common->private_data = NULL;
+
+ common->gadget = gadget;
+ common->ep0 = gadget->ep0;
+ common->ep0req = cdev->req;
+
+ /* Maybe allocate device-global string IDs, and patch descriptors */
+ if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
+ rc = usb_string_id(cdev);
+ if (unlikely(rc < 0))
+ goto error_release;
+ fsg_strings[FSG_STRING_INTERFACE].id = rc;
+ fsg_intf_desc.iInterface = rc;
+ }
+
+ /* Create the LUNs, open their backing files, and register the
+ * LUN devices in sysfs. */
+ curlun = calloc(nluns, sizeof *curlun);
+ if (!curlun) {
+ rc = -ENOMEM;
+ goto error_release;
+ }
+ common->nluns = nluns;
+
+ for (i = 0; i < nluns; i++) {
+ common->luns[i].removable = 1;
+
+ rc = fsg_lun_open(&common->luns[i], "");
+ if (rc)
+ goto error_luns;
+ }
+ common->lun = 0;
+
+ /* Data buffers cyclic list */
+ bh = common->buffhds;
+
+ i = FSG_NUM_BUFFERS;
+ goto buffhds_first_it;
+ do {
+ bh->next = bh + 1;
+ ++bh;
+buffhds_first_it:
+ bh->inreq_busy = 0;
+ bh->outreq_busy = 0;
+ bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
+ if (unlikely(!bh->buf)) {
+ rc = -ENOMEM;
+ goto error_release;
+ }
+ } while (--i);
+ bh->next = common->buffhds;
+
+ snprintf(common->inquiry_string, sizeof common->inquiry_string,
+ "%-8s%-16s%04x",
+ "Linux ",
+ "File-Store Gadget",
+ 0xffff);
+
+ /* Some peripheral controllers are known not to be able to
+ * halt bulk endpoints correctly. If one of them is present,
+ * disable stalls.
+ */
+
+ /* Tell the thread to start working */
+ common->thread_task =
+ kthread_create(fsg_main_thread, common,
+ OR(cfg->thread_name, "file-storage"));
+ if (IS_ERR(common->thread_task)) {
+ rc = PTR_ERR(common->thread_task);
+ goto error_release;
+ }
+
+#undef OR
+ /* Information */
+ INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
+ INFO(common, "Number of LUNs=%d\n", common->nluns);
+
+ return common;
+
+error_luns:
+ common->nluns = i + 1;
+error_release:
+ common->state = FSG_STATE_TERMINATED; /* The thread is dead */
+ /* Call fsg_common_release() directly, ref might be not
+ * initialised */
+ fsg_common_release(&common->ref);
+ return ERR_PTR(rc);
+}
+
+static void fsg_common_release(struct kref *ref)
+{
+ struct fsg_common *common = container_of(ref, struct fsg_common, ref);
+
+ /* If the thread isn't already dead, tell it to exit now */
+ if (common->state != FSG_STATE_TERMINATED) {
+ raise_exception(common, FSG_STATE_EXIT);
+ wait_for_completion(&common->thread_notifier);
+ }
+
+ if (likely(common->luns)) {
+ struct fsg_lun *lun = common->luns;
+ unsigned i = common->nluns;
+
+ /* In error recovery common->nluns may be zero. */
+ for (; i; --i, ++lun)
+ fsg_lun_close(lun);
+
+ kfree(common->luns);
+ }
+
+ {
+ struct fsg_buffhd *bh = common->buffhds;
+ unsigned i = FSG_NUM_BUFFERS;
+ do {
+ kfree(bh->buf);
+ } while (++bh, --i);
+ }
+
+ if (common->free_storage_on_release)
+ kfree(common);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_copy_descriptors - copy a vector of USB descriptors
+ * @src: null-terminated vector to copy
+ * Context: initialization code, which may sleep
+ *
+ * This makes a copy of a vector of USB descriptors. Its primary use
+ * is to support usb_function objects which can have multiple copies,
+ * each needing different descriptors. Functions may have static
+ * tables of descriptors, which are used as templates and customized
+ * with identifiers (for interfaces, strings, endpoints, and more)
+ * as needed by a given function instance.
+ */
+struct usb_descriptor_header **
+usb_copy_descriptors(struct usb_descriptor_header **src)
+{
+ struct usb_descriptor_header **tmp;
+ unsigned bytes;
+ unsigned n_desc;
+ void *mem;
+ struct usb_descriptor_header **ret;
+
+ /* count descriptors and their sizes; then add vector size */
+ for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++)
+ bytes += (*tmp)->bLength;
+ bytes += (n_desc + 1) * sizeof(*tmp);
+
+ mem = kmalloc(bytes, GFP_KERNEL);
+ if (!mem)
+ return NULL;
+
+ /* fill in pointers starting at "tmp",
+ * to descriptors copied starting at "mem";
+ * and return "ret"
+ */
+ tmp = mem;
+ ret = mem;
+ mem += (n_desc + 1) * sizeof(*tmp);
+ while (*src) {
+ memcpy(mem, *src, (*src)->bLength);
+ *tmp = mem;
+ tmp++;
+ mem += (*src)->bLength;
+ src++;
+ }
+ *tmp = NULL;
+
+ return ret;
+}
+
+
+
+static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct fsg_dev *fsg = fsg_from_func(f);
+
+ DBG(fsg, "unbind\n");
+ if (fsg->common->fsg == fsg) {
+ fsg->common->new_fsg = NULL;
+ raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ }
+
+ free(fsg->function.descriptors);
+ free(fsg->function.hs_descriptors);
+ kfree(fsg);
+}
+
+static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct fsg_dev *fsg = fsg_from_func(f);
+ struct usb_gadget *gadget = c->cdev->gadget;
+ int i;
+ struct usb_ep *ep;
+ fsg->gadget = gadget;
+
+ /* New interface */
+ i = usb_interface_id(c, f);
+ if (i < 0)
+ return i;
+ fsg_intf_desc.bInterfaceNumber = i;
+ fsg->interface_number = i;
+
+ /* Find all the endpoints we will use */
+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg->common; /* claim the endpoint */
+ fsg->bulk_in = ep;
+
+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg->common; /* claim the endpoint */
+ fsg->bulk_out = ep;
+
+ /* Copy descriptors */
+ f->descriptors = usb_copy_descriptors(fsg_fs_function);
+ if (unlikely(!f->descriptors))
+ return -ENOMEM;
+
+ if (gadget_is_dualspeed(gadget)) {
+ /* Assume endpoint addresses are the same for both speeds */
+ fsg_hs_bulk_in_desc.bEndpointAddress =
+ fsg_fs_bulk_in_desc.bEndpointAddress;
+ fsg_hs_bulk_out_desc.bEndpointAddress =
+ fsg_fs_bulk_out_desc.bEndpointAddress;
+ f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
+ if (unlikely(!f->hs_descriptors)) {
+ free(f->descriptors);
+ return -ENOMEM;
+ }
+ }
+ return 0;
+
+autoconf_fail:
+ ERROR(fsg, "unable to autoconfigure all endpoints\n");
+ return -ENOTSUPP;
+}
+
+
+/****************************** ADD FUNCTION ******************************/
+
+static struct usb_gadget_strings *fsg_strings_array[] = {
+ &fsg_stringtab,
+ NULL,
+};
+
+static int fsg_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct fsg_common *common)
+{
+ struct fsg_dev *fsg;
+ int rc;
+
+ fsg = calloc(1, sizeof *fsg);
+ if (!fsg)
+ return -ENOMEM;
+ fsg->function.name = FSG_DRIVER_DESC;
+ fsg->function.strings = fsg_strings_array;
+ fsg->function.bind = fsg_bind;
+ fsg->function.unbind = fsg_unbind;
+ fsg->function.setup = fsg_setup;
+ fsg->function.set_alt = fsg_set_alt;
+ fsg->function.disable = fsg_disable;
+
+ fsg->common = common;
+ common->fsg = fsg;
+ /* Our caller holds a reference to common structure so we
+ * don't have to be worry about it being freed until we return
+ * from this function. So instead of incrementing counter now
+ * and decrement in error recovery we increment it only when
+ * call to usb_add_function() was successful. */
+
+ rc = usb_add_function(c, &fsg->function);
+
+ if (rc)
+ kfree(fsg);
+
+ return rc;
+}
+
+int fsg_add(struct usb_configuration *c)
+{
+ struct fsg_common *fsg_common;
+
+ fsg_common = fsg_common_init(NULL, c->cdev);
+
+ fsg_common->vendor_name = 0;
+ fsg_common->product_name = 0;
+ fsg_common->release = 0xffff;
+
+ fsg_common->ops = NULL;
+ fsg_common->private_data = NULL;
+
+ the_fsg_common = fsg_common;
+
+ return fsg_bind_config(c->cdev, c, fsg_common);
+}
+
+int fsg_init(struct ums_board_info *ums)
+{
+ ums_info = ums;
+
+ return 0;
+}
diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index a5a4c1f..cc3f344 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -31,6 +31,7 @@
#include "gadget_chips.h"
#include "composite.c"
+#include "f_mass_storage.c"
/*
* One needs to define the following:
@@ -104,6 +105,8 @@ static int g_dnl_do_config(struct usb_configuration *c)
printf("GADGET DRIVER: %s\n", s);
if (!strcmp(s, "usb_dnl_dfu"))
ret = dfu_add(c);
+ else if (!strcmp(s, "usb_dnl_ums"))
+ ret = fsg_add(c);
return ret;
}
@@ -188,6 +191,9 @@ int g_dnl_register(const char *type)
if (!strcmp(type, "dfu")) {
strcpy(name, shortname);
strcat(name, type);
+ } else if (!strcmp(type, "ums")) {
+ strcpy(name, shortname);
+ strcat(name, type);
} else {
printf("%s: unknown command: %s\n", __func__, type);
return -EINVAL;
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
new file mode 100644
index 0000000..594dc10
--- /dev/null
+++ b/drivers/usb/gadget/storage_common.c
@@ -0,0 +1,653 @@
+/*
+ * storage_common.c -- Common definitions for mass storage functionality
+ *
+ * Copyright (C) 2003-2008 Alan Stern
+ * Copyeight (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz (m.nazarewicz@samsung.com)
+ *
+ * Ported to u-boot:
+ * Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * Code refactoring & cleanup:
+ * Łukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+/*
+ * This file requires the following identifiers used in USB strings to
+ * be defined (each of type pointer to char):
+ * - fsg_string_manufacturer -- name of the manufacturer
+ * - fsg_string_product -- name of the product
+ * - fsg_string_serial -- product's serial
+ * - fsg_string_config -- name of the configuration
+ * - fsg_string_interface -- name of the interface
+ * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS
+ * macro is defined prior to including this file.
+ */
+
+/*
+ * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and
+ * fsg_hs_intr_in_desc objects as well as
+ * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES
+ * macros are not defined.
+ *
+ * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER,
+ * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not
+ * defined (as well as corresponding entries in string tables are
+ * missing) and FSG_STRING_INTERFACE has value of zero.
+ *
+ * When FSG_NO_OTG is defined fsg_otg_desc won't be defined.
+ */
+
+/*
+ * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included
+ * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN
+ * characters rather then a pointer to void.
+ */
+
+
+/* #include <asm/unaligned.h> */
+
+
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with any other driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+#define FSG_VENDOR_ID 0x0525 /* NetChip */
+#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef DEBUG
+#undef VERBOSE_DEBUG
+#undef DUMP_MSGS
+#endif /* !DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VLDBG LDBG
+#else
+#define VLDBG(lun, fmt, args...) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+/*
+#define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args)
+#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args)
+#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args)
+#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args)
+*/
+
+#define LDBG(lun, fmt, args...) do { } while (0)
+#define LERROR(lun, fmt, args...) do { } while (0)
+#define LWARN(lun, fmt, args...) do { } while (0)
+#define LINFO(lun, fmt, args...) do { } while (0)
+
+/*
+ * Keep those macros in sync with those in
+ * include/linux/usb/composite.h or else GCC will complain. If they
+ * are identical (the same names of arguments, white spaces in the
+ * same places) GCC will allow redefinition otherwise (even if some
+ * white space is removed or added) warning will be issued.
+ *
+ * Those macros are needed here because File Storage Gadget does not
+ * include the composite.h header. For composite gadgets those macros
+ * are redundant since composite.h is included any way.
+ *
+ * One could check whether those macros are already defined (which
+ * would indicate composite.h had been included) or not (which would
+ * indicate we were in FSG) but this is not done because a warning is
+ * desired if definitions here differ from the ones in composite.h.
+ *
+ * We want the definitions to match and be the same in File Storage
+ * Gadget as well as Mass Storage Function (and so composite gadgets
+ * using MSF). If someone changes them in composite.h it will produce
+ * a warning in this file when building MSF.
+ */
+
+#define DBG(d, fmt, args...) debug(fmt , ## args)
+#define VDBG(d, fmt, args...) debug(fmt , ## args)
+/* #define ERROR(d, fmt, args...) printf(fmt , ## args) */
+/* #define WARNING(d, fmt, args...) printf(fmt , ## args) */
+/* #define INFO(d, fmt, args...) printf(fmt , ## args) */
+
+/* #define DBG(d, fmt, args...) do { } while (0) */
+/* #define VDBG(d, fmt, args...) do { } while (0) */
+#define ERROR(d, fmt, args...) do { } while (0)
+#define WARNING(d, fmt, args...) do { } while (0)
+#define INFO(d, fmt, args...) do { } while (0)
+
+#ifdef DUMP_MSGS
+
+/* dump_msg(fsg, const char * label, const u8 * buf, unsigned length); */
+# define dump_msg(fsg, label, buf, length) do { \
+ if (length < 512) { \
+ DBG(fsg, "%s, length %u:\n", label, length); \
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
+ 16, 1, buf, length, 0); \
+ } \
+} while (0)
+
+# define dump_cdb(fsg) do { } while (0)
+
+#else
+
+# define dump_msg(fsg, /* const char * */ label, \
+ /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
+
+# ifdef VERBOSE_DEBUG
+
+# define dump_cdb(fsg) \
+ print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \
+ 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \
+
+# else
+
+# define dump_cdb(fsg) do { } while (0)
+
+# endif /* VERBOSE_DEBUG */
+
+#endif /* DUMP_MSGS */
+
+/*-------------------------------------------------------------------------*/
+
+/* SCSI device types */
+#define TYPE_DISK 0x00
+#define TYPE_CDROM 0x05
+
+/* USB protocol value = the transport method */
+#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
+#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
+#define USB_PR_BULK 0x50 /* Bulk-only */
+
+/* USB subclass value = the protocol encapsulation */
+#define USB_SC_RBC 0x01 /* Reduced Block Commands (flash) */
+#define USB_SC_8020 0x02 /* SFF-8020i, MMC-2, ATAPI (CD-ROM) */
+#define USB_SC_QIC 0x03 /* QIC-157 (tape) */
+#define USB_SC_UFI 0x04 /* UFI (floppy) */
+#define USB_SC_8070 0x05 /* SFF-8070i (removable) */
+#define USB_SC_SCSI 0x06 /* Transparent SCSI */
+
+/* Bulk-only data structures */
+
+/* Command Block Wrapper */
+struct fsg_bulk_cb_wrap {
+ __le32 Signature; /* Contains 'USBC' */
+ u32 Tag; /* Unique per command id */
+ __le32 DataTransferLength; /* Size of the data */
+ u8 Flags; /* Direction in bit 7 */
+ u8 Lun; /* LUN (normally 0) */
+ u8 Length; /* Of the CDB, <= MAX_COMMAND_SIZE */
+ u8 CDB[16]; /* Command Data Block */
+};
+
+#define USB_BULK_CB_WRAP_LEN 31
+#define USB_BULK_CB_SIG 0x43425355 /* Spells out USBC */
+#define USB_BULK_IN_FLAG 0x80
+
+/* Command Status Wrapper */
+struct bulk_cs_wrap {
+ __le32 Signature; /* Should = 'USBS' */
+ u32 Tag; /* Same as original command */
+ __le32 Residue; /* Amount not transferred */
+ u8 Status; /* See below */
+};
+
+#define USB_BULK_CS_WRAP_LEN 13
+#define USB_BULK_CS_SIG 0x53425355 /* Spells out 'USBS' */
+#define USB_STATUS_PASS 0
+#define USB_STATUS_FAIL 1
+#define USB_STATUS_PHASE_ERROR 2
+
+/* Bulk-only class specific requests */
+#define USB_BULK_RESET_REQUEST 0xff
+#define USB_BULK_GET_MAX_LUN_REQUEST 0xfe
+
+/* CBI Interrupt data structure */
+struct interrupt_data {
+ u8 bType;
+ u8 bValue;
+};
+
+#define CBI_INTERRUPT_DATA_LEN 2
+
+/* CBI Accept Device-Specific Command request */
+#define USB_CBI_ADSC_REQUEST 0x00
+
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE 16
+
+/* SCSI commands that we recognize */
+#define SC_FORMAT_UNIT 0x04
+#define SC_INQUIRY 0x12
+#define SC_MODE_SELECT_6 0x15
+#define SC_MODE_SELECT_10 0x55
+#define SC_MODE_SENSE_6 0x1a
+#define SC_MODE_SENSE_10 0x5a
+#define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
+#define SC_READ_6 0x08
+#define SC_READ_10 0x28
+#define SC_READ_12 0xa8
+#define SC_READ_CAPACITY 0x25
+#define SC_READ_FORMAT_CAPACITIES 0x23
+#define SC_READ_HEADER 0x44
+#define SC_READ_TOC 0x43
+#define SC_RELEASE 0x17
+#define SC_REQUEST_SENSE 0x03
+#define SC_RESERVE 0x16
+#define SC_SEND_DIAGNOSTIC 0x1d
+#define SC_START_STOP_UNIT 0x1b
+#define SC_SYNCHRONIZE_CACHE 0x35
+#define SC_TEST_UNIT_READY 0x00
+#define SC_VERIFY 0x2f
+#define SC_WRITE_6 0x0a
+#define SC_WRITE_10 0x2a
+#define SC_WRITE_12 0xaa
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE 0
+#define SS_COMMUNICATION_FAILURE 0x040800
+#define SS_INVALID_COMMAND 0x052000
+#define SS_INVALID_FIELD_IN_CDB 0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500
+#define SS_MEDIUM_NOT_PRESENT 0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION 0x062800
+#define SS_RESET_OCCURRED 0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900
+#define SS_UNRECOVERED_READ_ERROR 0x031100
+#define SS_WRITE_ERROR 0x030c02
+#define SS_WRITE_PROTECTED 0x072700
+
+#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */
+#define ASC(x) ((u8) ((x) >> 8))
+#define ASCQ(x) ((u8) (x))
+
+struct device_attribute { int i; };
+struct rw_semaphore { int i; };
+#define down_write(...) do { } while (0)
+#define up_write(...) do { } while (0)
+#define down_read(...) do { } while (0)
+#define up_read(...) do { } while (0)
+#define ETOOSMALL 525
+
+#include <usb_mass_storage.h>
+extern struct ums_board_info *ums_info;
+
+/*-------------------------------------------------------------------------*/
+
+struct fsg_lun {
+ loff_t file_length;
+ loff_t num_sectors;
+
+ unsigned int initially_ro:1;
+ unsigned int ro:1;
+ unsigned int removable:1;
+ unsigned int cdrom:1;
+ unsigned int prevent_medium_removal:1;
+ unsigned int registered:1;
+ unsigned int info_valid:1;
+ unsigned int nofua:1;
+
+ u32 sense_data;
+ u32 sense_data_info;
+ u32 unit_attention_data;
+
+ struct device dev;
+};
+
+#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL)
+#if 0
+static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+{
+ return container_of(dev, struct fsg_lun, dev);
+}
+#endif
+
+/* Big enough to hold our biggest descriptor */
+#define EP0_BUFSIZE 256
+#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
+
+/* Number of buffers we will use. 2 is enough for double-buffering */
+#define FSG_NUM_BUFFERS 2
+
+/* Default size of buffer length. */
+#define FSG_BUFLEN ((u32)16384)
+
+/* Maximal number of LUNs supported in mass storage function */
+#define FSG_MAX_LUNS 8
+
+enum fsg_buffer_state {
+ BUF_STATE_EMPTY = 0,
+ BUF_STATE_FULL,
+ BUF_STATE_BUSY
+};
+
+struct fsg_buffhd {
+#ifdef FSG_BUFFHD_STATIC_BUFFER
+ char buf[FSG_BUFLEN];
+#else
+ void *buf;
+#endif
+ enum fsg_buffer_state state;
+ struct fsg_buffhd *next;
+
+ /*
+ * The NetChip 2280 is faster, and handles some protocol faults
+ * better, if we don't submit any short bulk-out read requests.
+ * So we will record the intended request length here.
+ */
+ unsigned int bulk_out_intended_length;
+
+ struct usb_request *inreq;
+ int inreq_busy;
+ struct usb_request *outreq;
+ int outreq_busy;
+};
+
+enum fsg_state {
+ /* This one isn't used anywhere */
+ FSG_STATE_COMMAND_PHASE = -10,
+ FSG_STATE_DATA_PHASE,
+ FSG_STATE_STATUS_PHASE,
+
+ FSG_STATE_IDLE = 0,
+ FSG_STATE_ABORT_BULK_OUT,
+ FSG_STATE_RESET,
+ FSG_STATE_INTERFACE_CHANGE,
+ FSG_STATE_CONFIG_CHANGE,
+ FSG_STATE_DISCONNECT,
+ FSG_STATE_EXIT,
+ FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+ DATA_DIR_UNKNOWN = 0,
+ DATA_DIR_FROM_HOST,
+ DATA_DIR_TO_HOST,
+ DATA_DIR_NONE
+};
+
+/*-------------------------------------------------------------------------*/
+
+static inline u32 get_unaligned_be24(u8 *buf)
+{
+ return 0xffffff & (u32) get_unaligned_be32(buf - 1);
+}
+
+/*-------------------------------------------------------------------------*/
+
+enum {
+#ifndef FSG_NO_DEVICE_STRINGS
+ FSG_STRING_MANUFACTURER = 1,
+ FSG_STRING_PRODUCT,
+ FSG_STRING_SERIAL,
+ FSG_STRING_CONFIG,
+#endif
+ FSG_STRING_INTERFACE
+};
+
+#ifndef FSG_NO_OTG
+static struct usb_otg_descriptor
+fsg_otg_desc = {
+ .bLength = sizeof fsg_otg_desc,
+ .bDescriptorType = USB_DT_OTG,
+
+ .bmAttributes = USB_OTG_SRP,
+};
+#endif
+
+/* There is only one interface. */
+
+static struct usb_interface_descriptor
+fsg_intf_desc = {
+ .bLength = sizeof fsg_intf_desc,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2, /* Adjusted during fsg_bind() */
+ .bInterfaceClass = USB_CLASS_MASS_STORAGE,
+ .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */
+ .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */
+ .iInterface = FSG_STRING_INTERFACE,
+};
+
+/*
+ * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
+ * interrupt-in.
+ */
+
+static struct usb_endpoint_descriptor
+fsg_fs_bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* wMaxPacketSize set by autoconfiguration */
+};
+
+static struct usb_endpoint_descriptor
+fsg_fs_bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* wMaxPacketSize set by autoconfiguration */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_fs_intr_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = cpu_to_le16(2),
+ .bInterval = 32, /* frames -> 32 ms */
+};
+
+#ifndef FSG_NO_OTG
+# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2
+#else
+# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1
+#endif
+
+#endif
+
+static struct usb_descriptor_header *fsg_fs_function[] = {
+#ifndef FSG_NO_OTG
+ (struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+ (struct usb_descriptor_header *) &fsg_intf_desc,
+ (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
+ (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
+#ifndef FSG_NO_INTR_EP
+ (struct usb_descriptor_header *) &fsg_fs_intr_in_desc,
+#endif
+ NULL,
+};
+
+/*
+ * USB 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ *
+ * That means alternate endpoint descriptors (bigger packets)
+ * and a "device qualifier" ... plus more construction options
+ * for the configuration descriptor.
+ */
+static struct usb_endpoint_descriptor
+fsg_hs_bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor
+fsg_hs_bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(512),
+ .bInterval = 1, /* NAK every 1 uframe */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_hs_intr_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = cpu_to_le16(2),
+ .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */
+};
+
+#ifndef FSG_NO_OTG
+# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2
+#else
+# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1
+#endif
+
+#endif
+
+static struct usb_descriptor_header *fsg_hs_function[] = {
+#ifndef FSG_NO_OTG
+ (struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+ (struct usb_descriptor_header *) &fsg_intf_desc,
+ (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
+ (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
+#ifndef FSG_NO_INTR_EP
+ (struct usb_descriptor_header *) &fsg_hs_intr_in_desc,
+#endif
+ NULL,
+};
+
+/* Maxpacket and other transfer characteristics vary by speed. */
+static struct usb_endpoint_descriptor *
+fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+ struct usb_endpoint_descriptor *hs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
+
+/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
+static struct usb_string fsg_strings[] = {
+#ifndef FSG_NO_DEVICE_STRINGS
+ {FSG_STRING_MANUFACTURER, fsg_string_manufacturer},
+ {FSG_STRING_PRODUCT, fsg_string_product},
+ {FSG_STRING_SERIAL, fsg_string_serial},
+ {FSG_STRING_CONFIG, fsg_string_config},
+#endif
+ {FSG_STRING_INTERFACE, fsg_string_interface},
+ {}
+};
+
+static struct usb_gadget_strings fsg_stringtab = {
+ .language = 0x0409, /* en-us */
+ .strings = fsg_strings,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing.
+ */
+
+static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
+{
+ int ro;
+ int rc = -EINVAL;
+ loff_t size;
+ loff_t num_sectors;
+ loff_t min_sectors;
+
+ /* R/W if we can, R/O if we must */
+ ro = curlun->initially_ro;
+
+ ums_info->get_capacity(&(ums_info->ums_dev), &size);
+ if (size < 0) {
+ printf("unable to find file size: %s\n", filename);
+ rc = (int) size;
+ goto out;
+ }
+ num_sectors = size >> 9; /* File size in 512-byte blocks */
+ min_sectors = 1;
+ if (num_sectors < min_sectors) {
+ printf("file too small: %s\n", filename);
+ rc = -ETOOSMALL;
+ goto out;
+ }
+
+ curlun->ro = ro;
+ curlun->file_length = size;
+ curlun->num_sectors = num_sectors;
+ debug("open backing file: %s\n", filename);
+ rc = 0;
+
+out:
+ return rc;
+}
+
+static void fsg_lun_close(struct fsg_lun *curlun)
+{
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync().
+ */
+static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
+{
+ return 0;
+}
+
+static void store_cdrom_address(u8 *dest, int msf, u32 addr)
+{
+ if (msf) {
+ /* Convert to Minutes-Seconds-Frames */
+ addr >>= 2; /* Convert to 2048-byte frames */
+ addr += 2*75; /* Lead-in occupies 2 seconds */
+ dest[3] = addr % 75; /* Frames */
+ addr /= 75;
+ dest[2] = addr % 60; /* Seconds */
+ addr /= 60;
+ dest[1] = addr; /* Minutes */
+ dest[0] = 0; /* Reserved */
+ } else {
+ /* Absolute sector */
+ put_unaligned_be32(addr, dest);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 6c94794..9a6f982 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -54,6 +54,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 3ca4c5c..0c797aa 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -42,11 +42,15 @@ DECLARE_GLOBAL_DATA_PTR;
*/
struct exynos_ehci {
struct exynos_usb_phy *usb;
- unsigned int *hcd;
+ struct ehci_hccr *hcd;
};
+static struct exynos_ehci exynos;
+
+#ifdef CONFIG_OF_CONTROL
static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
{
+ fdt_addr_t addr;
unsigned int node;
int depth;
@@ -59,12 +63,14 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
/*
* Get the base address for EHCI controller from the device node
*/
- exynos->hcd = (unsigned int *)fdtdec_get_addr(blob, node, "reg");
- if (exynos->hcd == NULL) {
+ addr = fdtdec_get_addr(blob, node, "reg");
+ if (addr == FDT_ADDR_T_NONE) {
debug("Can't get the EHCI register address\n");
return -ENXIO;
}
+ exynos->hcd = (struct ehci_hccr *)addr;
+
depth = 0;
node = fdtdec_next_compatible_subnode(blob, node,
COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
@@ -85,6 +91,7 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
return 0;
}
+#endif
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct exynos_usb_phy *usb)
@@ -144,20 +151,21 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
*/
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
- struct exynos_ehci *exynos = NULL;
+ struct exynos_ehci *ctx = &exynos;
- exynos = (struct exynos_ehci *)
- kzalloc(sizeof(struct exynos_ehci), GFP_KERNEL);
- if (!exynos) {
- debug("failed to allocate exynos ehci context\n");
- return -ENOMEM;
+#ifdef CONFIG_OF_CONTROL
+ if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
+ debug("Unable to parse device tree for ehci-exynos\n");
+ return -ENODEV;
}
+#else
+ ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
+ ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
+#endif
- exynos_usb_parse_dt(gd->fdt_blob, exynos);
+ setup_usb_phy(ctx->usb);
- setup_usb_phy(exynos->usb);
-
- *hccr = (struct ehci_hccr *)(exynos->hcd);
+ *hccr = ctx->hcd;
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
@@ -165,8 +173,6 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
(uint32_t)*hccr, (uint32_t)*hcor,
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
- kfree(exynos);
-
return 0;
}
@@ -176,20 +182,9 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
*/
int ehci_hcd_stop(int index)
{
- struct exynos_ehci *exynos = NULL;
-
- exynos = (struct exynos_ehci *)
- kzalloc(sizeof(struct exynos_ehci), GFP_KERNEL);
- if (!exynos) {
- debug("failed to allocate exynos ehci context\n");
- return -ENOMEM;
- }
-
- exynos_usb_parse_dt(gd->fdt_blob, exynos);
-
- reset_usb_phy(exynos->usb);
+ struct exynos_ehci *ctx = &exynos;
- kfree(exynos);
+ reset_usb_phy(ctx->usb);
return 0;
}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 7f98a63..c816878 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -21,12 +21,14 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <errno.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
#include <usb.h>
#include <asm/io.h>
#include <malloc.h>
#include <watchdog.h>
+#include <linux/compiler.h>
#include "ehci.h"
@@ -39,7 +41,10 @@ static struct ehci_ctrl {
struct ehci_hcor *hcor;
int rootdev;
uint16_t portreset;
- struct QH qh_list __attribute__((aligned(USB_DMA_MINALIGN)));
+ struct QH qh_list __aligned(USB_DMA_MINALIGN);
+ struct QH periodic_queue __aligned(USB_DMA_MINALIGN);
+ uint32_t *periodic_list;
+ int ntds;
} ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
#define ALIGN_END_ADDR(type, ptr, size) \
@@ -858,6 +863,8 @@ int usb_lowlevel_init(int index, void **controller)
uint32_t reg;
uint32_t cmd;
struct QH *qh_list;
+ struct QH *periodic;
+ int i;
if (ehci_hcd_init(index, &ehcic[index].hccr, &ehcic[index].hcor))
return -1;
@@ -870,6 +877,9 @@ int usb_lowlevel_init(int index, void **controller)
if (ehci_hcd_init(index, &ehcic[index].hccr, &ehcic[index].hcor))
return -1;
#endif
+ /* Set the high address word (aka segment) for 64-bit controller */
+ if (ehci_readl(&ehcic[index].hccr->cr_hccparams) & 1)
+ ehci_writel(ehcic[index].hcor->or_ctrldssegment, 0);
qh_list = &ehcic[index].qh_list;
@@ -884,6 +894,40 @@ int usb_lowlevel_init(int index, void **controller)
qh_list->qh_overlay.qt_token =
cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
+ /* Set async. queue head pointer. */
+ ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list);
+
+ /*
+ * Set up periodic list
+ * Step 1: Parent QH for all periodic transfers.
+ */
+ periodic = &ehcic[index].periodic_queue;
+ memset(periodic, 0, sizeof(*periodic));
+ periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
+ periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+
+ /*
+ * Step 2: Setup frame-list: Every microframe, USB tries the same list.
+ * In particular, device specifications on polling frequency
+ * are disregarded. Keyboards seem to send NAK/NYet reliably
+ * when polled with an empty buffer.
+ *
+ * Split Transactions will be spread across microframes using
+ * S-mask and C-mask.
+ */
+ ehcic[index].periodic_list = memalign(4096, 1024*4);
+ if (!ehcic[index].periodic_list)
+ return -ENOMEM;
+ for (i = 0; i < 1024; i++) {
+ ehcic[index].periodic_list[i] = (uint32_t)periodic
+ | QH_LINK_TYPE_QH;
+ }
+
+ /* Set periodic list base address */
+ ehci_writel(&ehcic[index].hcor->or_periodiclistbase,
+ (uint32_t)ehcic[index].periodic_list);
+
reg = ehci_readl(&ehcic[index].hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
@@ -953,10 +997,254 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
return ehci_submit_async(dev, pipe, buffer, length, setup);
}
+struct int_queue {
+ struct QH *first;
+ struct QH *current;
+ struct QH *last;
+ struct qTD *tds;
+};
+
+#define NEXT_QH(qh) (struct QH *)((qh)->qh_link & ~0x1f)
+
+static int
+enable_periodic(struct ehci_ctrl *ctrl)
+{
+ uint32_t cmd;
+ struct ehci_hcor *hcor = ctrl->hcor;
+ int ret;
+
+ cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd |= CMD_PSE;
+ ehci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake((uint32_t *)&hcor->or_usbsts,
+ STS_PSS, STS_PSS, 100 * 1000);
+ if (ret < 0) {
+ printf("EHCI failed: timeout when enabling periodic list\n");
+ return -ETIMEDOUT;
+ }
+ udelay(1000);
+ return 0;
+}
+
+static int
+disable_periodic(struct ehci_ctrl *ctrl)
+{
+ uint32_t cmd;
+ struct ehci_hcor *hcor = ctrl->hcor;
+ int ret;
+
+ cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd &= ~CMD_PSE;
+ ehci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake((uint32_t *)&hcor->or_usbsts,
+ STS_PSS, 0, 100 * 1000);
+ if (ret < 0) {
+ printf("EHCI failed: timeout when disabling periodic list\n");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int periodic_schedules;
+
+struct int_queue *
+create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize,
+ int elementsize, void *buffer)
+{
+ struct ehci_ctrl *ctrl = dev->controller;
+ struct int_queue *result = NULL;
+ int i;
+
+ debug("Enter create_int_queue\n");
+ if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
+ debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe));
+ return NULL;
+ }
+
+ /* limit to 4 full pages worth of data -
+ * we can safely fit them in a single TD,
+ * no matter the alignment
+ */
+ if (elementsize >= 16384) {
+ debug("too large elements for interrupt transfers\n");
+ return NULL;
+ }
+
+ result = malloc(sizeof(*result));
+ if (!result) {
+ debug("ehci intr queue: out of memory\n");
+ goto fail1;
+ }
+ result->first = memalign(32, sizeof(struct QH) * queuesize);
+ if (!result->first) {
+ debug("ehci intr queue: out of memory\n");
+ goto fail2;
+ }
+ result->current = result->first;
+ result->last = result->first + queuesize - 1;
+ result->tds = memalign(32, sizeof(struct qTD) * queuesize);
+ if (!result->tds) {
+ debug("ehci intr queue: out of memory\n");
+ goto fail3;
+ }
+ memset(result->first, 0, sizeof(struct QH) * queuesize);
+ memset(result->tds, 0, sizeof(struct qTD) * queuesize);
+
+ for (i = 0; i < queuesize; i++) {
+ struct QH *qh = result->first + i;
+ struct qTD *td = result->tds + i;
+ void **buf = &qh->buffer;
+
+ qh->qh_link = (uint32_t)(qh+1) | QH_LINK_TYPE_QH;
+ if (i == queuesize - 1)
+ qh->qh_link = QH_LINK_TERMINATE;
+
+ qh->qh_overlay.qt_next = (uint32_t)td;
+ qh->qh_endpt1 = (0 << 28) | /* No NAK reload (ehci 4.9) */
+ (usb_maxpacket(dev, pipe) << 16) | /* MPS */
+ (1 << 14) |
+ QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
+ (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */
+ (usb_pipedevice(pipe) << 0);
+ qh->qh_endpt2 = (1 << 30) | /* 1 Tx per mframe */
+ (1 << 0); /* S-mask: microframe 0 */
+ if (dev->speed == USB_SPEED_LOW ||
+ dev->speed == USB_SPEED_FULL) {
+ debug("TT: port: %d, hub address: %d\n",
+ dev->portnr, dev->parent->devnum);
+ qh->qh_endpt2 |= (dev->portnr << 23) |
+ (dev->parent->devnum << 16) |
+ (0x1c << 8); /* C-mask: microframes 2-4 */
+ }
+
+ td->qt_next = QT_NEXT_TERMINATE;
+ td->qt_altnext = QT_NEXT_TERMINATE;
+ debug("communication direction is '%s'\n",
+ usb_pipein(pipe) ? "in" : "out");
+ td->qt_token = (elementsize << 16) |
+ ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */
+ 0x80; /* active */
+ td->qt_buffer[0] = (uint32_t)buffer + i * elementsize;
+ td->qt_buffer[1] = (td->qt_buffer[0] + 0x1000) & ~0xfff;
+ td->qt_buffer[2] = (td->qt_buffer[0] + 0x2000) & ~0xfff;
+ td->qt_buffer[3] = (td->qt_buffer[0] + 0x3000) & ~0xfff;
+ td->qt_buffer[4] = (td->qt_buffer[0] + 0x4000) & ~0xfff;
+
+ *buf = buffer + i * elementsize;
+ }
+
+ if (disable_periodic(ctrl) < 0) {
+ debug("FATAL: periodic should never fail, but did");
+ goto fail3;
+ }
+
+ /* hook up to periodic list */
+ struct QH *list = &ctrl->periodic_queue;
+ result->last->qh_link = list->qh_link;
+ list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH;
+
+ if (enable_periodic(ctrl) < 0) {
+ debug("FATAL: periodic should never fail, but did");
+ goto fail3;
+ }
+ periodic_schedules++;
+
+ debug("Exit create_int_queue\n");
+ return result;
+fail3:
+ if (result->tds)
+ free(result->tds);
+fail2:
+ if (result->first)
+ free(result->first);
+ if (result)
+ free(result);
+fail1:
+ return NULL;
+}
+
+void *poll_int_queue(struct usb_device *dev, struct int_queue *queue)
+{
+ struct QH *cur = queue->current;
+
+ /* depleted queue */
+ if (cur == NULL) {
+ debug("Exit poll_int_queue with completed queue\n");
+ return NULL;
+ }
+ /* still active */
+ if (cur->qh_overlay.qt_token & 0x80) {
+ debug("Exit poll_int_queue with no completed intr transfer. "
+ "token is %x\n", cur->qh_overlay.qt_token);
+ return NULL;
+ }
+ if (!(cur->qh_link & QH_LINK_TERMINATE))
+ queue->current++;
+ else
+ queue->current = NULL;
+ debug("Exit poll_int_queue with completed intr transfer. "
+ "token is %x at %p (first at %p)\n", cur->qh_overlay.qt_token,
+ &cur->qh_overlay.qt_token, queue->first);
+ return cur->buffer;
+}
+
+/* Do not free buffers associated with QHs, they're owned by someone else */
+int
+destroy_int_queue(struct usb_device *dev, struct int_queue *queue)
+{
+ struct ehci_ctrl *ctrl = dev->controller;
+ int result = -1;
+ unsigned long timeout;
+
+ if (disable_periodic(ctrl) < 0) {
+ debug("FATAL: periodic should never fail, but did");
+ goto out;
+ }
+ periodic_schedules--;
+
+ struct QH *cur = &ctrl->periodic_queue;
+ timeout = get_timer(0) + 500; /* abort after 500ms */
+ while (!(cur->qh_link & QH_LINK_TERMINATE)) {
+ debug("considering %p, with qh_link %x\n", cur, cur->qh_link);
+ if (NEXT_QH(cur) == queue->first) {
+ debug("found candidate. removing from chain\n");
+ cur->qh_link = queue->last->qh_link;
+ result = 0;
+ break;
+ }
+ cur = NEXT_QH(cur);
+ if (get_timer(0) > timeout) {
+ printf("Timeout destroying interrupt endpoint queue\n");
+ result = -1;
+ goto out;
+ }
+ }
+
+ if (periodic_schedules > 0) {
+ result = enable_periodic(ctrl);
+ if (result < 0)
+ debug("FATAL: periodic should never fail, but did");
+ }
+
+out:
+ free(queue->tds);
+ free(queue->first);
+ free(queue);
+
+ return result;
+}
+
int
submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, int interval)
{
+ void *backbuffer;
+ struct int_queue *queue;
+ unsigned long timeout;
+ int result = 0, ret;
+
debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
dev, pipe, buffer, length, interval);
@@ -972,9 +1260,31 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
* not require more than a single qTD.
*/
if (length > usb_maxpacket(dev, pipe)) {
- printf("%s: Interrupt transfers requiring several transactions "
- "are not supported.\n", __func__);
+ printf("%s: Interrupt transfers requiring several "
+ "transactions are not supported.\n", __func__);
return -1;
}
- return ehci_submit_async(dev, pipe, buffer, length, NULL);
+
+ queue = create_int_queue(dev, pipe, 1, length, buffer);
+
+ timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
+ while ((backbuffer = poll_int_queue(dev, queue)) == NULL)
+ if (get_timer(0) > timeout) {
+ printf("Timeout poll on interrupt endpoint\n");
+ result = -ETIMEDOUT;
+ break;
+ }
+
+ if (backbuffer != buffer) {
+ debug("got wrong buffer back (%x instead of %x)\n",
+ (uint32_t)backbuffer, (uint32_t)buffer);
+ return -EINVAL;
+ }
+
+ ret = destroy_int_queue(dev, queue);
+ if (ret < 0)
+ return ret;
+
+ /* everything worked out fine */
+ return result;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 29af02d..90d7a6f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -19,6 +19,7 @@
*/
#include <common.h>
+#include <errno.h>
#include <pci.h>
#include <usb.h>
@@ -32,31 +33,76 @@ static struct pci_device_id ehci_pci_ids[] = {
{0x12D8, 0x400F}, /* Pericom */
{0, 0}
};
+#else
+static pci_dev_t ehci_find_class(int index)
+{
+ int bus;
+ int devnum;
+ pci_dev_t bdf;
+ uint32_t class;
+
+ for (bus = 0; bus <= pci_last_busno(); bus++) {
+ for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) {
+ pci_read_config_dword(PCI_BDF(bus, devnum, 0),
+ PCI_CLASS_REVISION, &class);
+ if (class >> 16 == 0xffff)
+ continue;
+
+ for (bdf = PCI_BDF(bus, devnum, 0);
+ bdf <= PCI_BDF(bus, devnum,
+ PCI_MAX_PCI_FUNCTIONS - 1);
+ bdf += PCI_BDF(0, 0, 1)) {
+ pci_read_config_dword(bdf, PCI_CLASS_REVISION,
+ &class);
+ if ((class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
+ && !index--)
+ return bdf;
+ }
+ }
+ }
+
+ return -ENODEV;
+}
#endif
/*
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+ struct ehci_hcor **ret_hcor)
{
pci_dev_t pdev;
+ uint32_t cmd;
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+#ifdef CONFIG_PCI_EHCI_DEVICE
pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
- if (pdev == -1) {
+#else
+ pdev = ehci_find_class(index);
+#endif
+ if (pdev < 0) {
printf("EHCI host controller not found\n");
return -1;
}
- *hccr = (struct ehci_hccr *)pci_map_bar(pdev,
+ hccr = (struct ehci_hccr *)pci_map_bar(pdev,
PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
- *hcor = (struct ehci_hcor *)((uint32_t) *hccr +
- HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ hcor = (struct ehci_hcor *)((uint32_t) hccr +
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
- (uint32_t)*hccr, (uint32_t)*hcor,
- (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ (uint32_t)hccr, (uint32_t)hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ *ret_hccr = hccr;
+ *ret_hcor = hcor;
+ /* enable busmaster */
+ pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER;
+ pci_write_config_dword(pdev, PCI_COMMAND, cmd);
return 0;
}
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
new file mode 100644
index 0000000..f99bd1f
--- /dev/null
+++ b/drivers/usb/host/ehci-spear.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2010
+ * Armando Visconti, ST Micoelectronics, <armando.visconti@st.com>.
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include "ehci.h"
+#include <asm/arch/hardware.h>
+
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ *hccr = (struct ehci_hccr *)(CONFIG_SYS_UHC0_EHCI_BASE + 0x100);
+ *hcor = (struct ehci_hcor *)((uint32_t)*hccr
+ + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+ debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n",
+ (uint32_t)*hccr, (uint32_t)*hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 1e3cd79..d090f0a 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -69,6 +69,7 @@ struct ehci_hcor {
#define CMD_RUN (1 << 0) /* start/stop HC */
uint32_t or_usbsts;
#define STS_ASS (1 << 15)
+#define STS_PSS (1 << 14)
#define STS_HALT (1 << 12)
uint32_t or_usbintr;
#define INTR_UE (1 << 0) /* USB interrupt enable */
@@ -245,7 +246,10 @@ struct QH {
* Add dummy fill value to make the size of this struct
* aligned to 32 bytes
*/
- uint8_t fill[16];
+ union {
+ uint32_t fill[4];
+ void *buffer;
+ };
};
/* Low level init functions */
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 49f05de..87daf62 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -273,6 +273,23 @@
*/
#define CONFIG_PCI
+/*-----------------------------------------------------------------------
+ * USB configuration
+ */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONFIG_CMD_USB
+
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_STD_DEVICES_SETTINGS
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 63745ac..31d8190 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -316,4 +316,9 @@
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 120 * 4) + (1 << 12))
+#define CONFIG_CMD_USB_MASS_STORAGE
+#if defined(CONFIG_CMD_USB_MASS_STORAGE)
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/usb_mass_storage.h b/include/usb_mass_storage.h
new file mode 100644
index 0000000..ffc3a13
--- /dev/null
+++ b/include/usb_mass_storage.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2011 Samsung Electrnoics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * aloong with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __USB_MASS_STORAGE_H__
+#define __USB_MASS_STORAGE_H__
+
+#define SECTOR_SIZE 0x200
+
+#include <mmc.h>
+
+struct ums_device {
+ struct mmc *mmc;
+ int dev_num;
+ int offset;
+ int part_size;
+};
+
+struct ums_board_info {
+ int (*read_sector)(struct ums_device *ums_dev,
+ ulong start, lbaint_t blkcnt, void *buf);
+ int (*write_sector)(struct ums_device *ums_dev,
+ ulong start, lbaint_t blkcnt, const void *buf);
+ void (*get_capacity)(struct ums_device *ums_dev,
+ long long int *capacity);
+ const char *name;
+ struct ums_device ums_dev;
+};
+
+extern void board_usb_init(void);
+
+extern int fsg_init(struct ums_board_info *);
+extern void fsg_cleanup(void);
+extern struct ums_board_info *board_ums_init(unsigned int,
+ unsigned int, unsigned int);
+extern int usb_gadget_handle_interrupts(void);
+extern int fsg_main_thread(void *);
+
+#endif /* __USB_MASS_STORAGE_H__ */
diff --git a/include/usbdevice.h b/include/usbdevice.h
index 3edaf8b..7037efd 100644
--- a/include/usbdevice.h
+++ b/include/usbdevice.h
@@ -475,7 +475,9 @@ typedef struct urb_link {
* function driver to inform it that data has arrived.
*/
-#define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */
+/* in linux we'd malloc this, but in u-boot we prefer static data */
+#define URB_BUF_SIZE 512
+
struct urb {
struct usb_endpoint_instance *endpoint;