diff options
360 files changed, 15904 insertions, 2007 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 6c702f2..eadb21f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -93,10 +93,9 @@ S: Maintained T: git git://git.denx.de/u-boot-imx.git F: arch/arm/cpu/arm1136/mx*/ F: arch/arm/cpu/arm926ejs/mx*/ -F: arch/arm/cpu/arm926ejs/imx/ F: arch/arm/cpu/armv7/mx*/ F: arch/arm/cpu/armv7/vf610/ -F: arch/arm/cpu/imx-common/ +F: arch/arm/imx-common/ F: arch/arm/include/asm/arch-imx/ F: arch/arm/include/asm/arch-mx*/ F: arch/arm/include/asm/arch-vf610/ @@ -348,7 +348,7 @@ OBJCOPY = $(CROSS_COMPILE)objcopy OBJDUMP = $(CROSS_COMPILE)objdump AWK = awk PERL = perl -PYTHON = python +PYTHON ?= python DTC = dtc CHECK = sparse diff --git a/arch/arc/lib/cpu.c b/arch/arc/lib/cpu.c index d1f10ab..cb80893 100644 --- a/arch/arc/lib/cpu.c +++ b/arch/arc/lib/cpu.c @@ -28,3 +28,9 @@ int arch_early_init_r(void) gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; return 0; } + +/* This is a dummy function on arc */ +int dram_init(void) +{ + return 0; +} diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7b20750..42f93b4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1242,6 +1242,8 @@ source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/imx-common/Kconfig" +source "board/aries/m28evk/Kconfig" +source "board/aries/m53evk/Kconfig" source "board/bosch/shc/Kconfig" source "board/BuR/brxre1/Kconfig" source "board/BuR/brppt1/Kconfig" @@ -1262,8 +1264,6 @@ source "board/cirrus/edb93xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" source "board/creative/xfi3/Kconfig" -source "board/denx/m28evk/Kconfig" -source "board/denx/m53evk/Kconfig" source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 190e5c6..af6dad3 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -155,6 +155,19 @@ config TARGET_MX6CUBOXI select BOARD_LATE_INIT select SUPPORT_SPL +config TARGET_MX6LOGICPD + bool "Logic PD i.MX6 SOM" + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + select DM + select DM_ETH + select DM_GPIO + select DM_I2C + select DM_MMC + select DM_PMIC + select DM_REGULATOR + select OF_CONTROL + config TARGET_MX6QARM2 bool "mx6qarm2" @@ -172,6 +185,7 @@ config TARGET_MX6Q_ICORE config TARGET_MX6Q_ICORE_RQS bool "Support Engicam i.Core RQS" + select BOARD_LATE_INIT select MX6QDL select OF_CONTROL select DM @@ -253,6 +267,7 @@ config TARGET_MX6UL_GEAM select SUPPORT_SPL config TARGET_MX6UL_ISIOT bool "Support Engicam Is.IoT MX6UL" + select BOARD_LATE_INIT select MX6UL select OF_CONTROL select DM @@ -404,6 +419,7 @@ source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" source "board/samtec/vining_2000/Kconfig" source "board/liebherr/mccmon6/Kconfig" +source "board/logicpd/imx6/Kconfig" source "board/seco/Kconfig" source "board/solidrun/mx6cuboxi/Kconfig" source "board/technexion/pico-imx6ul/Kconfig" diff --git a/arch/arm/cpu/armv7/mx7ulp/scg.c b/arch/arm/cpu/armv7/mx7ulp/scg.c index ca8252d..c117af0 100644 --- a/arch/arm/cpu/armv7/mx7ulp/scg.c +++ b/arch/arm/cpu/armv7/mx7ulp/scg.c @@ -504,7 +504,9 @@ u32 decode_pll(enum pll_clocks pll) num = readl(&scg1_regs->spllnum); denom = readl(&scg1_regs->splldenom); - return (infreq / pre_div) * (mult + num / denom); + infreq = infreq / pre_div; + + return infreq * mult + infreq * num / denom; case PLL_A7_APLL: reg = readl(&scg1_regs->apllcsr); @@ -531,7 +533,9 @@ u32 decode_pll(enum pll_clocks pll) num = readl(&scg1_regs->apllnum); denom = readl(&scg1_regs->aplldenom); - return (infreq / pre_div) * (mult + num / denom); + infreq = infreq / pre_div; + + return infreq * mult + infreq * num / denom; case PLL_USB: reg = readl(&scg1_regs->upllcsr); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index ea6c090..d446527 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <linux/errno.h> #include <asm/system.h> @@ -876,7 +877,7 @@ void update_early_mmu_table(void) __weak int dram_init(void) { - initdram(); + fsl_initdram(); #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a2c0717..68d2791 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -323,11 +323,13 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \ + imx6sl-evk.dtb \ imx6sll-evk.dtb \ imx6dl-icore.dtb \ imx6dl-icore-rqs.dtb \ imx6q-icore.dtb \ imx6q-icore-rqs.dtb \ + imx6q-logicpd.dtb \ imx6sx-sabreauto.dtb \ imx6ul-geam-kit.dtb \ imx6ul-isiot-emmc.dtb \ @@ -347,6 +349,23 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ at91-sama5d2_xplained.dtb +dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \ + sama5d31ek.dtb \ + sama5d33ek.dtb \ + sama5d34ek.dtb \ + sama5d35ek.dtb \ + sama5d36ek.dtb \ + sama5d36ek_cmp.dtb + +dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \ + at91-sama5d3_xplained.dtb + +dtb-$(CONFIG_TARGET_SAMA5D4EK) += \ + at91-sama5d4ek.dtb + +dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \ + at91-sama5d4_xplained.dtb + dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2835-rpi-a-plus.dtb \ bcm2835-rpi-a.dtb \ diff --git a/arch/arm/dts/at91-sama5d3_xplained.dts b/arch/arm/dts/at91-sama5d3_xplained.dts new file mode 100644 index 0000000..6959710 --- /dev/null +++ b/arch/arm/dts/at91-sama5d3_xplained.dts @@ -0,0 +1,348 @@ +/* + * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Xplained"; + compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &dbgu; + }; + + aliases { + spi0 = &spi0; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + u-boot,dm-pre-reloc; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; + }; + + mmc1: mmc@f8000000 { + u-boot,dm-pre-reloc; + vmmc-supply = <&vcc_3v3_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "disabled"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>; + }; + }; + + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + pinctrl-0 = <&pinctrl_i2c0_pu>; + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "disabled"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@7 { + reg = <0x7>; + }; + }; + + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; + status = "okay"; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + uart0: serial@f0024000 { + status = "okay"; + }; + + mmc1: mmc@f8000000 { + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; + }; + }; + + spi1: spi@f8008000 { + cs-gpios = <&pioC 25 0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + >; + status = "okay"; + }; + + i2c2: i2c@f801c000 { + dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + pinctrl-0 = <&pinctrl_i2c2_pu>; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; + }; + + dbgu: serial@ffffee00 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + pinctrl@fffff200 { + board { + u-boot,dm-pre-reloc; + pinctrl_i2c0_pu: i2c0_pu { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_i2c2_pu: i2c2_pu { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc1_cd: mmc1_cd { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ + }; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_LOW + &pioE 4 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + vcc_mmc0_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + gpio = <&pioE 2 GPIO_ACTIVE_LOW>; + regulator-name = "mmc0-card-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + bp3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ + linux,default-trigger = "heartbeat"; + }; + + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts new file mode 100644 index 0000000..ca6aff2 --- /dev/null +++ b/arch/arm/dts/at91-sama5d4_xplained.dts @@ -0,0 +1,286 @@ +/* + * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board + * + * Copyright (C) 2015 Atmel, + * 2015 Josh Wu <josh.wu@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "Atmel SAMA5D4 Xplained"; + compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &usart3; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f8010000 { + u-boot,dm-pre-reloc; + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + spi_flash@0 { + u-boot,dm-pre-reloc; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + }; + }; + + mmc1: mmc@fc000000 { + u-boot,dm-pre-reloc; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 3 0>; + }; + }; + + usart3: serial@fc00c000 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + usart4: serial@fc010000 { + status = "okay"; + }; + + spi1: spi@fc018000 { + cs-gpios = <&pioB 21 0>; + status = "okay"; + }; + + adc0: adc@fc034000 { + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger conflicts with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + atmel,adc-vref = <3300>; + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + u-boot,dm-pre-reloc; + pinctrl_mmc1_cd: mmc1_cd { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_macb0_phy_irq: macb0_phy_irq_0 { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + }; + + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 11 GPIO_ACTIVE_HIGH + &pioE 14 GPIO_ACTIVE_HIGH + >; + status = "okay"; + }; + + usb2: ehci@00600000 { + status = "okay"; + }; + + nand0: nand@80000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + atmel,has-pmecc; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + d8 { + label = "d8"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + d10 { + label = "d10"; + gpios = <&pioE 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_3v3_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + reg = <0 1>; + }; + + vcc_mmc1_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + gpio = <&pioE 4 GPIO_ACTIVE_LOW>; + regulator-name = "VDD MCI1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + regulator-always-on; + reg = <1 1>; + }; +}; diff --git a/arch/arm/dts/at91-sama5d4ek.dts b/arch/arm/dts/at91-sama5d4ek.dts new file mode 100644 index 0000000..b965f5b --- /dev/null +++ b/arch/arm/dts/at91-sama5d4ek.dts @@ -0,0 +1,341 @@ +/* + * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "Atmel SAMA5D4-EK"; + compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &usart3; + }; + + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + adc0: adc@fc034000 { + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger conflicts with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + /* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */ + atmel,adc-vref = <3300>; + /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */ + status = "okay"; /* Enable ADC IIO support */ + }; + + mmc0: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 5 0>; + }; + }; + + ssc0: ssc@f8008000 { + status = "okay"; + }; + + spi0: spi@f8010000 { + u-boot,dm-pre-reloc; + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + spi_flash@0 { + u-boot,dm-pre-reloc; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + + wm8904: codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; + + qt1070:keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <25 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + + atmel_mxt_ts@4c { + compatible = "atmel,atmel_mxt_ts"; + reg = <0x4c>; + interrupt-parent = <&pioE>; + interrupts = <24 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mxt_ts>; + }; + }; + + macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; + phy-mode = "rmii"; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + mmc1: mmc@fc000000 { + u-boot,dm-pre-reloc; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 6 0>; + }; + }; + + usart2: serial@fc008000 { + status = "okay"; + }; + + usart3: serial@fc00c000 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + usart4: serial@fc010000 { + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + u-boot,dm-pre-reloc; + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_mmc1_cd: mmc1_cd { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */ + }; + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_mxt_ts: mxt_irq { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + }; + + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ + &pioE 11 GPIO_ACTIVE_LOW + &pioE 12 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00600000 { + status = "okay"; + }; + + nand0: nand@80000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + atmel,has-pmecc; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + d8 { + label = "d8"; + /* PE28, conflicts with usart4 rts pin */ + gpios = <&pioE 28 GPIO_ACTIVE_LOW>; + }; + + d9 { + label = "d9"; + gpios = <&pioE 9 GPIO_ACTIVE_HIGH>; + }; + + d10 { + label = "d10"; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D4EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; +}; diff --git a/arch/arm/dts/imx6q-logicpd.dts b/arch/arm/dts/imx6q-logicpd.dts new file mode 100644 index 0000000..d1e7a38 --- /dev/null +++ b/arch/arm/dts/imx6q-logicpd.dts @@ -0,0 +1,190 @@ +/* + * Copyright 2017 Logic PD, Inc. + * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qdl-logicpd.dtsi" + +/ { + model = "Logic PD i.MX6QDL SOM"; + compatible = "fsl,imx6q"; + + reg_usb_otg_vbus: regulator-otg-vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usbh1vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + + reg_3v3: regulator-3v3@2 { + compatible = "regulator-fixed"; + regulator-name = "reg_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + phy_type = "hsic"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-speed = <10>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* nINT */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 /* Ethernet Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x130b0 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x130b0 + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x130b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* USB_H1_PWR_EN */ + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x17030 + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x13030 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 /* USB_OTG_PWR_EN */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; +}; diff --git a/arch/arm/dts/imx6qdl-logicpd.dtsi b/arch/arm/dts/imx6qdl-logicpd.dtsi new file mode 100644 index 0000000..db1a63d --- /dev/null +++ b/arch/arm/dts/imx6qdl-logicpd.dtsi @@ -0,0 +1,361 @@ +/* + * Copyright 2016 Logic PD + * This file is adapted from imx6qdl-sabresd.dtsi. + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6q.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +/* Reroute power feeding the CPU to come from the external PMIC */ +®_arm +{ + vin-supply = <&sw1a_reg>; +}; + +®_soc +{ + vin-supply = <&sw1c_reg>; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddcore"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddsoc"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_3v3"; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-name = "sw3a_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-name = "sw3b_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_rgmii"; + }; + + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-name = "gen_5v0"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "gen_vsns"; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "gen_1v5"; + }; + + vgen2_reg: vgen2 { + regulator-name = "vgen2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-name = "gen_vadj_0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vgen4_reg: vgen4 { + regulator-name = "gen_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "gen_adj_1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "gen_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + }; + }; + + mfg_eeprom: at24@51 { + compatible = "atmel,24c64"; + pagesize = <32>; + read-only; + reg = <0x51>; + }; + + user_eeprom: at24@52 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x52>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1b0b0 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x80000000 + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x80000000 + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x80000000 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x80000000 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x80000000 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x80000000 + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x80000000 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x80000000 + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x80000000 + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x80000000 + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x80000000 + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x80000000 + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x80000000 + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x80000000 + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x80000000 + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x80000000 + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x80000000 + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x80000000 + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x80000000 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x80000000 + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x80000000 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x80000000 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x80000000 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x80000000 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000 + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x80000000 + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x80000000 + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x80000000 + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x80000000 + MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x80000000 + MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x80000000 + MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x80000000 + MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x80000000 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x80000000 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WL_IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1f0b0 /* WLAN_EN */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1f0b0 /* BT_EN */ + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&sw2_reg>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio7>; + interrupts = <1 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/dts/imx6sl-evk.dts b/arch/arm/dts/imx6sl-evk.dts new file mode 100644 index 0000000..0a90eea --- /dev/null +++ b/arch/arm/dts/imx6sl-evk.dts @@ -0,0 +1,641 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6sl-evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 + MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 + MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 + MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 + MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 + MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 + MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */ + MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */ + MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */ + MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */ + MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */ + MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */ + MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */ + MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */ + >; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6sl-pinfunc.h b/arch/arm/dts/imx6sl-pinfunc.h new file mode 100644 index 0000000..77b17bc --- /dev/null +++ b/arch/arm/dts/imx6sl-pinfunc.h @@ -0,0 +1,1077 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SL_PINFUNC_H +#define __DTS_IMX6SL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 +#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 +#define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 +#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 +#define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 +#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x050 0x2a8 0x80c 0x2 0x0 +#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK 0x050 0x2a8 0x70c 0x3 0x0 +#define MX6SL_PAD_AUD_RXC__I2C3_SDA 0x050 0x2a8 0x730 0x4 0x0 +#define MX6SL_PAD_AUD_RXC__GPIO1_IO01 0x050 0x2a8 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1 0x050 0x2a8 0x6c4 0x6 0x0 +#define MX6SL_PAD_AUD_RXD__AUD3_RXD 0x054 0x2ac 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI 0x054 0x2ac 0x6bc 0x1 0x0 +#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA 0x054 0x2ac 0x814 0x2 0x0 +#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA 0x054 0x2ac 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXD__FEC_RX_ER 0x054 0x2ac 0x708 0x3 0x0 +#define MX6SL_PAD_AUD_RXD__SD1_LCTL 0x054 0x2ac 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_RXD__GPIO1_IO02 0x054 0x2ac 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS 0x058 0x2b0 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXFS__I2C1_SCL 0x058 0x2b0 0x71c 0x1 0x0 +#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA 0x058 0x2b0 0x80c 0x2 0x1 +#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA 0x058 0x2b0 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXFS__FEC_MDIO 0x058 0x2b0 0x6f4 0x3 0x0 +#define MX6SL_PAD_AUD_RXFS__I2C3_SCL 0x058 0x2b0 0x72c 0x4 0x0 +#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00 0x058 0x2b0 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0 0x058 0x2b0 0x6c0 0x6 0x0 +#define MX6SL_PAD_AUD_TXC__AUD3_TXC 0x05c 0x2b4 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO 0x05c 0x2b4 0x6b8 0x1 0x0 +#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA 0x05c 0x2b4 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA 0x05c 0x2b4 0x814 0x2 0x1 +#define MX6SL_PAD_AUD_TXC__FEC_RX_DV 0x05c 0x2b4 0x704 0x3 0x0 +#define MX6SL_PAD_AUD_TXC__SD2_LCTL 0x05c 0x2b4 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXC__GPIO1_IO03 0x05c 0x2b4 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_TXD__AUD3_TXD 0x060 0x2b8 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK 0x060 0x2b8 0x6b0 0x1 0x0 +#define MX6SL_PAD_AUD_TXD__UART4_CTS_B 0x060 0x2b8 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXD__UART4_RTS_B 0x060 0x2b8 0x810 0x2 0x0 +#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0 0x060 0x2b8 0x000 0x3 0x0 +#define MX6SL_PAD_AUD_TXD__SD4_LCTL 0x060 0x2b8 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXD__GPIO1_IO05 0x060 0x2b8 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x064 0x2bc 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXFS__PWM3_OUT 0x064 0x2bc 0x000 0x1 0x0 +#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B 0x064 0x2bc 0x810 0x2 0x1 +#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B 0x064 0x2bc 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1 0x064 0x2bc 0x6fc 0x3 0x0 +#define MX6SL_PAD_AUD_TXFS__SD3_LCTL 0x064 0x2bc 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04 0x064 0x2bc 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x068 0x358 0x684 0x0 0x0 +#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS 0x068 0x358 0x5f8 0x1 0x0 +#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x068 0x358 0x818 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B 0x068 0x358 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0 0x068 0x358 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_MISO__SD2_WP 0x068 0x358 0x834 0x4 0x0 +#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10 0x068 0x358 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x06c 0x35c 0x688 0x0 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC 0x06c 0x35c 0x5f4 0x1 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x06c 0x35c 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA 0x06c 0x35c 0x81c 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x06c 0x35c 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x06c 0x35c 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x06c 0x35c 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x070 0x360 0x67c 0x0 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD 0x070 0x360 0x5e8 0x1 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x070 0x360 0x81c 0x2 0x1 +#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA 0x070 0x360 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x070 0x360 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET 0x070 0x360 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x070 0x360 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x070 0x360 0x820 0x6 0x0 +#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x074 0x364 0x68c 0x0 0x0 +#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD 0x074 0x364 0x5e4 0x1 0x0 +#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x074 0x364 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B 0x074 0x364 0x818 0x2 0x1 +#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1 0x074 0x364 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B 0x074 0x364 0x830 0x4 0x0 +#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x074 0x364 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x074 0x364 0x000 0x6 0x0 +#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x078 0x368 0x6a0 0x0 0x0 +#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x078 0x368 0x000 0x1 0x0 +#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B 0x078 0x368 0x808 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B 0x078 0x368 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK 0x078 0x368 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI2_MISO__SD1_WP 0x078 0x368 0x82c 0x4 0x0 +#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x078 0x368 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x078 0x368 0x824 0x6 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x07c 0x36c 0x6a4 0x0 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x07c 0x36c 0x000 0x1 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA 0x07c 0x36c 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA 0x07c 0x36c 0x80c 0x2 0x2 +#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x07c 0x36c 0x670 0x3 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x07c 0x36c 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x07c 0x36c 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x080 0x370 0x69c 0x0 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x080 0x370 0x7f4 0x1 0x1 +#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA 0x080 0x370 0x80c 0x2 0x3 +#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA 0x080 0x370 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x080 0x370 0x674 0x3 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET 0x080 0x370 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x080 0x370 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x080 0x370 0x820 0x6 0x1 +#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x084 0x374 0x6a8 0x0 0x0 +#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x084 0x374 0x698 0x1 0x0 +#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B 0x084 0x374 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B 0x084 0x374 0x808 0x2 0x1 +#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC 0x084 0x374 0x678 0x3 0x0 +#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B 0x084 0x374 0x828 0x4 0x0 +#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x084 0x374 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x084 0x374 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0 0x088 0x378 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_BDR0__SD4_CLK 0x088 0x378 0x850 0x1 0x0 +#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B 0x088 0x378 0x808 0x2 0x2 +#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B 0x088 0x378 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26 0x088 0x378 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_BDR0__SPDC_RL 0x088 0x378 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05 0x088 0x378 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7 0x088 0x378 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1 0x08c 0x37c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_BDR1__SD4_CMD 0x08c 0x37c 0x858 0x1 0x0 +#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B 0x08c 0x37c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B 0x08c 0x37c 0x808 0x2 0x3 +#define MX6SL_PAD_EPDC_BDR1__EIM_CRE 0x08c 0x37c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_BDR1__SPDC_UD 0x08c 0x37c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06 0x08c 0x37c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8 0x08c 0x37c 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_D0__EPDC_DATA00 0x090 0x380 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI 0x090 0x380 0x6d8 0x1 0x0 +#define MX6SL_PAD_EPDC_D0__LCD_DATA24 0x090 0x380 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D0__CSI_DATA00 0x090 0x380 0x630 0x3 0x0 +#define MX6SL_PAD_EPDC_D0__SPDC_DATA00 0x090 0x380 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D0__GPIO1_IO07 0x090 0x380 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D1__EPDC_DATA01 0x094 0x384 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO 0x094 0x384 0x6d4 0x1 0x0 +#define MX6SL_PAD_EPDC_D1__LCD_DATA25 0x094 0x384 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D1__CSI_DATA01 0x094 0x384 0x634 0x3 0x0 +#define MX6SL_PAD_EPDC_D1__SPDC_DATA01 0x094 0x384 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D1__GPIO1_IO08 0x094 0x384 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D10__EPDC_DATA10 0x098 0x388 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0 0x098 0x388 0x6c0 0x1 0x1 +#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2 0x098 0x388 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D10__EIM_ADDR18 0x098 0x388 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D10__SPDC_DATA10 0x098 0x388 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D10__GPIO1_IO17 0x098 0x388 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D10__SD4_WP 0x098 0x388 0x87c 0x6 0x0 +#define MX6SL_PAD_EPDC_D11__EPDC_DATA11 0x09c 0x38c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK 0x09c 0x38c 0x6b0 0x1 0x1 +#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3 0x09c 0x38c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D11__EIM_ADDR19 0x09c 0x38c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D11__SPDC_DATA11 0x09c 0x38c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D11__GPIO1_IO18 0x09c 0x38c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D11__SD4_CD_B 0x09c 0x38c 0x854 0x6 0x0 +#define MX6SL_PAD_EPDC_D12__EPDC_DATA12 0x0a0 0x390 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x0a0 0x390 0x804 0x1 0x0 +#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA 0x0a0 0x390 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM 0x0a0 0x390 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D12__EIM_ADDR20 0x0a0 0x390 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D12__SPDC_DATA12 0x0a0 0x390 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D12__GPIO1_IO19 0x0a0 0x390 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1 0x0a0 0x390 0x6c4 0x6 0x1 +#define MX6SL_PAD_EPDC_D13__EPDC_DATA13 0x0a4 0x394 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x0a4 0x394 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA 0x0a4 0x394 0x804 0x1 0x1 +#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ 0x0a4 0x394 0x6e8 0x2 0x0 +#define MX6SL_PAD_EPDC_D13__EIM_ADDR21 0x0a4 0x394 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D13__SPDC_DATA13 0x0a4 0x394 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D13__GPIO1_IO20 0x0a4 0x394 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2 0x0a4 0x394 0x6c8 0x6 0x0 +#define MX6SL_PAD_EPDC_D14__EPDC_DATA14 0x0a8 0x398 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x0a8 0x398 0x800 0x1 0x0 +#define MX6SL_PAD_EPDC_D14__UART2_CTS_B 0x0a8 0x398 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT 0x0a8 0x398 0x6ec 0x2 0x0 +#define MX6SL_PAD_EPDC_D14__EIM_ADDR22 0x0a8 0x398 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D14__SPDC_DATA14 0x0a8 0x398 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D14__GPIO1_IO21 0x0a8 0x398 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3 0x0a8 0x398 0x6cc 0x6 0x0 +#define MX6SL_PAD_EPDC_D15__EPDC_DATA15 0x0ac 0x39c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x0ac 0x39c 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D15__UART2_RTS_B 0x0ac 0x39c 0x800 0x1 0x1 +#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE 0x0ac 0x39c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D15__EIM_ADDR23 0x0ac 0x39c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D15__SPDC_DATA15 0x0ac 0x39c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D15__GPIO1_IO22 0x0ac 0x39c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY 0x0ac 0x39c 0x6b4 0x6 0x1 +#define MX6SL_PAD_EPDC_D2__EPDC_DATA02 0x0b0 0x3a0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0 0x0b0 0x3a0 0x6dc 0x1 0x0 +#define MX6SL_PAD_EPDC_D2__LCD_DATA26 0x0b0 0x3a0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D2__CSI_DATA02 0x0b0 0x3a0 0x638 0x3 0x0 +#define MX6SL_PAD_EPDC_D2__SPDC_DATA02 0x0b0 0x3a0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D2__GPIO1_IO09 0x0b0 0x3a0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D3__EPDC_DATA03 0x0b4 0x3a4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK 0x0b4 0x3a4 0x6d0 0x1 0x0 +#define MX6SL_PAD_EPDC_D3__LCD_DATA27 0x0b4 0x3a4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D3__CSI_DATA03 0x0b4 0x3a4 0x63c 0x3 0x0 +#define MX6SL_PAD_EPDC_D3__SPDC_DATA03 0x0b4 0x3a4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D3__GPIO1_IO10 0x0b4 0x3a4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D4__EPDC_DATA04 0x0b8 0x3a8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1 0x0b8 0x3a8 0x6e0 0x1 0x0 +#define MX6SL_PAD_EPDC_D4__LCD_DATA28 0x0b8 0x3a8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D4__CSI_DATA04 0x0b8 0x3a8 0x640 0x3 0x0 +#define MX6SL_PAD_EPDC_D4__SPDC_DATA04 0x0b8 0x3a8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D4__GPIO1_IO11 0x0b8 0x3a8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D5__EPDC_DATA05 0x0bc 0x3ac 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2 0x0bc 0x3ac 0x6e4 0x1 0x0 +#define MX6SL_PAD_EPDC_D5__LCD_DATA29 0x0bc 0x3ac 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D5__CSI_DATA05 0x0bc 0x3ac 0x644 0x3 0x0 +#define MX6SL_PAD_EPDC_D5__SPDC_DATA05 0x0bc 0x3ac 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D5__GPIO1_IO12 0x0bc 0x3ac 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D6__EPDC_DATA06 0x0c0 0x3b0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3 0x0c0 0x3b0 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D6__LCD_DATA30 0x0c0 0x3b0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D6__CSI_DATA06 0x0c0 0x3b0 0x648 0x3 0x0 +#define MX6SL_PAD_EPDC_D6__SPDC_DATA06 0x0c0 0x3b0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D6__GPIO1_IO13 0x0c0 0x3b0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D7__EPDC_DATA07 0x0c4 0x3b4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY 0x0c4 0x3b4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D7__LCD_DATA31 0x0c4 0x3b4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D7__CSI_DATA07 0x0c4 0x3b4 0x64c 0x3 0x0 +#define MX6SL_PAD_EPDC_D7__SPDC_DATA07 0x0c4 0x3b4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D7__GPIO1_IO14 0x0c4 0x3b4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D8__EPDC_DATA08 0x0c8 0x3b8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI 0x0c8 0x3b8 0x6bc 0x1 0x1 +#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0 0x0c8 0x3b8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D8__EIM_ADDR16 0x0c8 0x3b8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D8__SPDC_DATA08 0x0c8 0x3b8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D8__GPIO1_IO15 0x0c8 0x3b8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D8__SD4_RESET 0x0c8 0x3b8 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_D9__EPDC_DATA09 0x0cc 0x3bc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO 0x0cc 0x3bc 0x6b8 0x1 0x1 +#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1 0x0cc 0x3bc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D9__EIM_ADDR17 0x0cc 0x3bc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D9__SPDC_DATA09 0x0cc 0x3bc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D9__GPIO1_IO16 0x0cc 0x3bc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D9__SD4_VSELECT 0x0cc 0x3bc 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0d0 0x3c0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x0d0 0x3c0 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR 0x0d0 0x3c0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x0d0 0x3c0 0x674 0x3 0x1 +#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL 0x0d0 0x3c0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31 0x0d0 0x3c0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET 0x0d0 0x3c0 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE 0x0d4 0x3c4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3 0x0d4 0x3c4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER 0x0d4 0x3c4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC 0x0d4 0x3c4 0x670 0x3 0x1 +#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL 0x0d4 0x3c4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00 0x0d4 0x3c4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT 0x0d4 0x3c4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL 0x0d8 0x3c8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY 0x0d8 0x3c8 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR 0x0d8 0x3c8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK 0x0d8 0x3c8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL 0x0d8 0x3c8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01 0x0d8 0x3c8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDRL__SD2_WP 0x0d8 0x3c8 0x834 0x6 0x1 +#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP 0x0dc 0x3cc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT 0x0dc 0x3cc 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR 0x0dc 0x3cc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC 0x0dc 0x3cc 0x678 0x3 0x1 +#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL 0x0dc 0x3cc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02 0x0dc 0x3cc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B 0x0dc 0x3cc 0x830 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM 0x0e0 0x3d0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0 0x0e0 0x3d0 0x85c 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20 0x0e0 0x3d0 0x7c8 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK 0x0e0 0x3d0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x0e0 0x3d0 0x5dc 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11 0x0e0 0x3d0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET 0x0e0 0x3d0 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0 0x0e4 0x3d4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC 0x0e4 0x3d4 0x604 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16 0x0e4 0x3d4 0x7b8 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW 0x0e4 0x3d4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL 0x0e4 0x3d4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x0e4 0x3d4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET 0x0e4 0x3d4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1 0x0e8 0x3d8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS 0x0e8 0x3d8 0x610 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17 0x0e8 0x3d8 0x7bc 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B 0x0e8 0x3d8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL 0x0e8 0x3d8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x0e8 0x3d8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT 0x0e8 0x3d8 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2 0x0ec 0x3dc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD 0x0ec 0x3dc 0x600 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18 0x0ec 0x3dc 0x7c0 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B 0x0ec 0x3dc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL 0x0ec 0x3dc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x0ec 0x3dc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP 0x0ec 0x3dc 0x87c 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3 0x0f0 0x3e0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC 0x0f0 0x3e0 0x60c 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19 0x0f0 0x3e0 0x7c4 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B 0x0f0 0x3e0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL 0x0f0 0x3e0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x0f0 0x3e0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B 0x0f0 0x3e0 0x854 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ 0x0f4 0x3e4 0x6e8 0x0 0x1 +#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1 0x0f4 0x3e4 0x860 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21 0x0f4 0x3e4 0x7cc 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN 0x0f4 0x3e4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID 0x0f4 0x3e4 0x5e0 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x0f4 0x3e4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT 0x0f4 0x3e4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT 0x0f8 0x3e8 0x6ec 0x0 0x1 +#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2 0x0f8 0x3e8 0x864 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22 0x0f8 0x3e8 0x7d0 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B 0x0f8 0x3e8 0x884 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI 0x0f8 0x3e8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x0f8 0x3e8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP 0x0f8 0x3e8 0x84c 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE 0x0fc 0x3ec 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3 0x0fc 0x3ec 0x868 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23 0x0fc 0x3ec 0x7d4 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B 0x0fc 0x3ec 0x880 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO 0x0fc 0x3ec 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x0fc 0x3ec 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B 0x0fc 0x3ec 0x838 0x6 0x0 +#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100 0x3f0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x100 0x3f0 0x6ac 0x1 0x0 +#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT 0x100 0x3f0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B 0x100 0x3f0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR 0x100 0x3f0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27 0x100 0x3f0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x104 0x3f4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B 0x104 0x3f4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT 0x104 0x3f4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B 0x104 0x3f4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER 0x104 0x3f4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28 0x104 0x3f4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x108 0x3f8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL 0x108 0x3f8 0x72c 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT 0x108 0x3f8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B 0x108 0x3f8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR 0x108 0x3f8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x108 0x3f8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x10c 0x3fc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA 0x10c 0x3fc 0x730 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT 0x10c 0x3fc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B 0x10c 0x3fc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR 0x10c 0x3fc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30 0x10c 0x3fc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x110 0x400 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x110 0x400 0x6a4 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL 0x110 0x400 0x724 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08 0x110 0x400 0x650 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL 0x110 0x400 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23 0x110 0x400 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE 0x114 0x404 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO 0x114 0x404 0x6a0 0x1 0x1 +#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA 0x114 0x404 0x728 0x2 0x0 +#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09 0x114 0x404 0x654 0x3 0x0 +#define MX6SL_PAD_EPDC_SDLE__SPDC_LD 0x114 0x404 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24 0x114 0x404 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE 0x118 0x408 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0 0x118 0x408 0x6a8 0x1 0x1 +#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR 0x118 0x408 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10 0x118 0x408 0x658 0x3 0x0 +#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL 0x118 0x408 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25 0x118 0x408 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x11c 0x40c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x11c 0x40c 0x69c 0x1 0x1 +#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x11c 0x40c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11 0x11c 0x40c 0x65c 0x3 0x0 +#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR 0x11c 0x40c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26 0x11c 0x40c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x120 0x410 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS 0x120 0x410 0x608 0x1 0x0 +#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA 0x120 0x410 0x80c 0x2 0x4 +#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA 0x120 0x410 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24 0x120 0x410 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0 0x120 0x410 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x120 0x410 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x120 0x410 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x124 0x414 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD 0x124 0x414 0x5fc 0x1 0x0 +#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA 0x124 0x414 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA 0x124 0x414 0x80c 0x2 0x5 +#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25 0x124 0x414 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1 0x124 0x414 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04 0x124 0x414 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x124 0x414 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x128 0x418 0x704 0x0 0x1 +#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x128 0x418 0x860 0x1 0x1 +#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC 0x128 0x418 0x624 0x2 0x0 +#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO 0x128 0x418 0x6d4 0x3 0x1 +#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2 0x128 0x418 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x128 0x418 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31 0x128 0x418 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_MDC__FEC_MDC 0x12c 0x41c 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_MDC__SD4_DATA4 0x12c 0x41c 0x86c 0x1 0x0 +#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT 0x12c 0x41c 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_MDC__SD1_RESET 0x12c 0x41c 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_MDC__SD3_RESET 0x12c 0x41c 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x12c 0x41c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_MDC__ARM_TRACE29 0x12c 0x41c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x130 0x420 0x6f4 0x0 0x1 +#define MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130 0x420 0x850 0x1 0x1 +#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS 0x130 0x420 0x620 0x2 0x0 +#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0 0x130 0x420 0x6dc 0x3 0x1 +#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1 0x130 0x420 0x710 0x4 0x0 +#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x130 0x420 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26 0x130 0x420 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x134 0x424 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x134 0x424 0x000 0x1 0x0 +#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B 0x134 0x424 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT 0x134 0x424 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY 0x134 0x424 0x62c 0x4 0x0 +#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x134 0x424 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK 0x134 0x424 0x7f4 0x6 0x2 +#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER 0x138 0x428 0x708 0x0 0x1 +#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x138 0x428 0x85c 0x1 0x1 +#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD 0x138 0x428 0x614 0x2 0x0 +#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI 0x138 0x428 0x6d8 0x3 0x1 +#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1 0x138 0x428 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x138 0x428 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25 0x138 0x428 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x13c 0x42c 0x6f8 0x0 0x0 +#define MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x13c 0x42c 0x870 0x1 0x0 +#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x13c 0x42c 0x5dc 0x2 0x1 +#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT 0x13c 0x42c 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT 0x13c 0x42c 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x13c 0x42c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24 0x13c 0x42c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x140 0x430 0x6fc 0x0 0x1 +#define MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x140 0x430 0x864 0x1 0x1 +#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS 0x140 0x430 0x628 0x2 0x0 +#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1 0x140 0x430 0x6e0 0x3 0x1 +#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3 0x140 0x430 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x140 0x430 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RXD1__FEC_COL 0x140 0x430 0x6f0 0x6 0x0 +#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK 0x144 0x434 0x70c 0x0 0x1 +#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x144 0x434 0x858 0x1 0x1 +#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC 0x144 0x434 0x61c 0x2 0x0 +#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK 0x144 0x434 0x6d0 0x3 0x1 +#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2 0x144 0x434 0x714 0x4 0x0 +#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x144 0x434 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27 0x144 0x434 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x148 0x438 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x148 0x438 0x874 0x1 0x0 +#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN 0x148 0x438 0x7f0 0x2 0x0 +#define MX6SL_PAD_FEC_TX_EN__SD1_WP 0x148 0x438 0x82c 0x3 0x1 +#define MX6SL_PAD_FEC_TX_EN__SD3_WP 0x148 0x438 0x84c 0x4 0x1 +#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x148 0x438 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28 0x148 0x438 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x14c 0x43c 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x14c 0x43c 0x868 0x1 0x1 +#define MX6SL_PAD_FEC_TXD0__AUD6_TXD 0x14c 0x43c 0x618 0x2 0x0 +#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2 0x14c 0x43c 0x6e4 0x3 0x1 +#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN 0x14c 0x43c 0x718 0x4 0x0 +#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x14c 0x43c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30 0x14c 0x43c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x150 0x440 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x150 0x440 0x878 0x1 0x0 +#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT 0x150 0x440 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_TXD1__SD1_CD_B 0x150 0x440 0x828 0x3 0x1 +#define MX6SL_PAD_FEC_TXD1__SD3_CD_B 0x150 0x440 0x838 0x4 0x1 +#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x150 0x440 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK 0x150 0x440 0x700 0x6 0x0 +#define MX6SL_PAD_HSIC_DAT__USB_H_DATA 0x154 0x444 0x000 0x0 0x0 +#define MX6SL_PAD_HSIC_DAT__I2C1_SCL 0x154 0x444 0x71c 0x1 0x1 +#define MX6SL_PAD_HSIC_DAT__PWM1_OUT 0x154 0x444 0x000 0x2 0x0 +#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M 0x154 0x444 0x000 0x3 0x0 +#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19 0x154 0x444 0x000 0x5 0x0 +#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE 0x158 0x448 0x000 0x0 0x0 +#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA 0x158 0x448 0x720 0x1 0x1 +#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT 0x158 0x448 0x000 0x2 0x0 +#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0 +#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x158 0x448 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x15c 0x44c 0x71c 0x0 0x2 +#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B 0x15c 0x44c 0x7f8 0x1 0x0 +#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B 0x15c 0x44c 0x000 0x1 0x0 +#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2 0x15c 0x44c 0x6c8 0x2 0x1 +#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0 0x15c 0x44c 0x6f8 0x3 0x1 +#define MX6SL_PAD_I2C1_SCL__SD3_RESET 0x15c 0x44c 0x000 0x4 0x0 +#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12 0x15c 0x44c 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1 0x15c 0x44c 0x690 0x6 0x0 +#define MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x160 0x450 0x720 0x0 0x2 +#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B 0x160 0x450 0x000 0x1 0x0 +#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B 0x160 0x450 0x7f8 0x1 0x1 +#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3 0x160 0x450 0x6cc 0x2 0x1 +#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN 0x160 0x450 0x000 0x3 0x0 +#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT 0x160 0x450 0x000 0x4 0x0 +#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13 0x160 0x450 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2 0x160 0x450 0x694 0x6 0x0 +#define MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x164 0x454 0x724 0x0 0x1 +#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS 0x164 0x454 0x5f0 0x1 0x0 +#define MX6SL_PAD_I2C2_SCL__SPDIF_IN 0x164 0x454 0x7f0 0x2 0x1 +#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1 0x164 0x454 0x000 0x3 0x0 +#define MX6SL_PAD_I2C2_SCL__SD3_WP 0x164 0x454 0x84c 0x4 0x2 +#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14 0x164 0x454 0x000 0x5 0x0 +#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY 0x164 0x454 0x680 0x6 0x0 +#define MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x168 0x458 0x728 0x0 0x1 +#define MX6SL_PAD_I2C2_SDA__AUD4_RXC 0x168 0x458 0x5ec 0x1 0x0 +#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT 0x168 0x458 0x000 0x2 0x0 +#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT 0x168 0x458 0x000 0x3 0x0 +#define MX6SL_PAD_I2C2_SDA__SD3_CD_B 0x168 0x458 0x838 0x4 0x2 +#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15 0x168 0x458 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL0__KEY_COL0 0x16c 0x474 0x734 0x0 0x0 +#define MX6SL_PAD_KEY_COL0__I2C2_SCL 0x16c 0x474 0x724 0x1 0x2 +#define MX6SL_PAD_KEY_COL0__LCD_DATA00 0x16c 0x474 0x778 0x2 0x0 +#define MX6SL_PAD_KEY_COL0__EIM_AD00 0x16c 0x474 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL0__SD1_CD_B 0x16c 0x474 0x828 0x4 0x2 +#define MX6SL_PAD_KEY_COL0__GPIO3_IO24 0x16c 0x474 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL1__KEY_COL1 0x170 0x478 0x738 0x0 0x0 +#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI 0x170 0x478 0x6d8 0x1 0x2 +#define MX6SL_PAD_KEY_COL1__LCD_DATA02 0x170 0x478 0x780 0x2 0x0 +#define MX6SL_PAD_KEY_COL1__EIM_AD02 0x170 0x478 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL1__SD3_DATA4 0x170 0x478 0x83c 0x4 0x0 +#define MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x170 0x478 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL2__KEY_COL2 0x174 0x47c 0x73c 0x0 0x0 +#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0 0x174 0x47c 0x6dc 0x1 0x2 +#define MX6SL_PAD_KEY_COL2__LCD_DATA04 0x174 0x47c 0x788 0x2 0x0 +#define MX6SL_PAD_KEY_COL2__EIM_AD04 0x174 0x47c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL2__SD3_DATA6 0x174 0x47c 0x844 0x4 0x0 +#define MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x174 0x47c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL3__KEY_COL3 0x178 0x480 0x740 0x0 0x0 +#define MX6SL_PAD_KEY_COL3__AUD6_RXFS 0x178 0x480 0x620 0x1 0x1 +#define MX6SL_PAD_KEY_COL3__LCD_DATA06 0x178 0x480 0x790 0x2 0x0 +#define MX6SL_PAD_KEY_COL3__EIM_AD06 0x178 0x480 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL3__SD4_DATA6 0x178 0x480 0x874 0x4 0x1 +#define MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x178 0x480 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL3__SD1_RESET 0x178 0x480 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL4__KEY_COL4 0x17c 0x484 0x744 0x0 0x0 +#define MX6SL_PAD_KEY_COL4__AUD6_RXD 0x17c 0x484 0x614 0x1 0x1 +#define MX6SL_PAD_KEY_COL4__LCD_DATA08 0x17c 0x484 0x798 0x2 0x0 +#define MX6SL_PAD_KEY_COL4__EIM_AD08 0x17c 0x484 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL4__SD4_CLK 0x17c 0x484 0x850 0x4 0x2 +#define MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17c 0x484 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR 0x17c 0x484 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL5__KEY_COL5 0x180 0x488 0x748 0x0 0x0 +#define MX6SL_PAD_KEY_COL5__AUD6_TXFS 0x180 0x488 0x628 0x1 0x1 +#define MX6SL_PAD_KEY_COL5__LCD_DATA10 0x180 0x488 0x7a0 0x2 0x0 +#define MX6SL_PAD_KEY_COL5__EIM_AD10 0x180 0x488 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL5__SD4_DATA0 0x180 0x488 0x85c 0x4 0x2 +#define MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x180 0x488 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR 0x180 0x488 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL6__KEY_COL6 0x184 0x48c 0x74c 0x0 0x0 +#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x184 0x48c 0x814 0x1 0x2 +#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA 0x184 0x48c 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_COL6__LCD_DATA12 0x184 0x48c 0x7a8 0x2 0x0 +#define MX6SL_PAD_KEY_COL6__EIM_AD12 0x184 0x48c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL6__SD4_DATA2 0x184 0x48c 0x864 0x4 0x2 +#define MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x184 0x48c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL6__SD3_RESET 0x184 0x48c 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL7__KEY_COL7 0x188 0x490 0x750 0x0 0x0 +#define MX6SL_PAD_KEY_COL7__UART4_RTS_B 0x188 0x490 0x810 0x1 0x2 +#define MX6SL_PAD_KEY_COL7__UART4_CTS_B 0x188 0x490 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_COL7__LCD_DATA14 0x188 0x490 0x7b0 0x2 0x0 +#define MX6SL_PAD_KEY_COL7__EIM_AD14 0x188 0x490 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL7__SD4_DATA4 0x188 0x490 0x86c 0x4 0x1 +#define MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x188 0x490 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL7__SD1_WP 0x188 0x490 0x82c 0x6 0x2 +#define MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x18c 0x494 0x754 0x0 0x0 +#define MX6SL_PAD_KEY_ROW0__I2C2_SDA 0x18c 0x494 0x728 0x1 0x2 +#define MX6SL_PAD_KEY_ROW0__LCD_DATA01 0x18c 0x494 0x77c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW0__EIM_AD01 0x18c 0x494 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW0__SD1_WP 0x18c 0x494 0x82c 0x4 0x3 +#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x18c 0x494 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x190 0x498 0x758 0x0 0x0 +#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO 0x190 0x498 0x6d4 0x1 0x2 +#define MX6SL_PAD_KEY_ROW1__LCD_DATA03 0x190 0x498 0x784 0x2 0x0 +#define MX6SL_PAD_KEY_ROW1__EIM_AD03 0x190 0x498 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW1__SD3_DATA5 0x190 0x498 0x840 0x4 0x0 +#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27 0x190 0x498 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x194 0x49c 0x75c 0x0 0x0 +#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK 0x194 0x49c 0x6d0 0x1 0x2 +#define MX6SL_PAD_KEY_ROW2__LCD_DATA05 0x194 0x49c 0x78c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW2__EIM_AD05 0x194 0x49c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW2__SD3_DATA7 0x194 0x49c 0x848 0x4 0x0 +#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29 0x194 0x49c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW3__KEY_ROW3 0x198 0x4a0 0x760 0x0 0x0 +#define MX6SL_PAD_KEY_ROW3__AUD6_RXC 0x198 0x4a0 0x61c 0x1 0x1 +#define MX6SL_PAD_KEY_ROW3__LCD_DATA07 0x198 0x4a0 0x794 0x2 0x0 +#define MX6SL_PAD_KEY_ROW3__EIM_AD07 0x198 0x4a0 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW3__SD4_DATA7 0x198 0x4a0 0x878 0x4 0x1 +#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31 0x198 0x4a0 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT 0x198 0x4a0 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_ROW4__KEY_ROW4 0x19c 0x4a4 0x764 0x0 0x0 +#define MX6SL_PAD_KEY_ROW4__AUD6_TXC 0x19c 0x4a4 0x624 0x1 0x1 +#define MX6SL_PAD_KEY_ROW4__LCD_DATA09 0x19c 0x4a4 0x79c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW4__EIM_AD09 0x19c 0x4a4 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW4__SD4_CMD 0x19c 0x4a4 0x858 0x4 0x2 +#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01 0x19c 0x4a4 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC 0x19c 0x4a4 0x824 0x6 0x1 +#define MX6SL_PAD_KEY_ROW5__KEY_ROW5 0x1a0 0x4a8 0x768 0x0 0x0 +#define MX6SL_PAD_KEY_ROW5__AUD6_TXD 0x1a0 0x4a8 0x618 0x1 0x1 +#define MX6SL_PAD_KEY_ROW5__LCD_DATA11 0x1a0 0x4a8 0x7a4 0x2 0x0 +#define MX6SL_PAD_KEY_ROW5__EIM_AD11 0x1a0 0x4a8 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW5__SD4_DATA1 0x1a0 0x4a8 0x860 0x4 0x2 +#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x1a0 0x4a8 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x1a0 0x4a8 0x820 0x6 0x2 +#define MX6SL_PAD_KEY_ROW6__KEY_ROW6 0x1a4 0x4ac 0x76c 0x0 0x0 +#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1a4 0x4ac 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA 0x1a4 0x4ac 0x814 0x1 0x3 +#define MX6SL_PAD_KEY_ROW6__LCD_DATA13 0x1a4 0x4ac 0x7ac 0x2 0x0 +#define MX6SL_PAD_KEY_ROW6__EIM_AD13 0x1a4 0x4ac 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW6__SD4_DATA3 0x1a4 0x4ac 0x868 0x4 0x2 +#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x1a4 0x4ac 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT 0x1a4 0x4ac 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_ROW7__KEY_ROW7 0x1a8 0x4b0 0x770 0x0 0x0 +#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B 0x1a8 0x4b0 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B 0x1a8 0x4b0 0x810 0x1 0x3 +#define MX6SL_PAD_KEY_ROW7__LCD_DATA15 0x1a8 0x4b0 0x7b4 0x2 0x0 +#define MX6SL_PAD_KEY_ROW7__EIM_AD15 0x1a8 0x4b0 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW7__SD4_DATA5 0x1a8 0x4b0 0x870 0x4 0x1 +#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x1a8 0x4b0 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW7__SD1_CD_B 0x1a8 0x4b0 0x828 0x6 0x3 +#define MX6SL_PAD_LCD_CLK__LCD_CLK 0x1ac 0x4b4 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_CLK__SD4_DATA4 0x1ac 0x4b4 0x86c 0x1 0x2 +#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN 0x1ac 0x4b4 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_CLK__EIM_RW 0x1ac 0x4b4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_CLK__PWM4_OUT 0x1ac 0x4b4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x1ac 0x4b4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0 0x4b8 0x778 0x0 0x1 +#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI 0x1b0 0x4b8 0x688 0x1 0x1 +#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID 0x1b0 0x4b8 0x5e0 0x2 0x1 +#define MX6SL_PAD_LCD_DAT0__PWM1_OUT 0x1b0 0x4b8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B 0x1b0 0x4b8 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x1b0 0x4b8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00 0x1b0 0x4b8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00 0x1b0 0x4b8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b4 0x4bc 0x77c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO 0x1b4 0x4bc 0x684 0x1 0x1 +#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x1b4 0x4bc 0x5dc 0x2 0x2 +#define MX6SL_PAD_LCD_DAT1__PWM2_OUT 0x1b4 0x4bc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS 0x1b4 0x4bc 0x5f0 0x4 0x1 +#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x1b4 0x4bc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01 0x1b4 0x4bc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01 0x1b4 0x4bc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b8 0x4c0 0x7a0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT10__KEY_COL1 0x1b8 0x4c0 0x738 0x1 0x1 +#define MX6SL_PAD_LCD_DAT10__CSI_DATA07 0x1b8 0x4c0 0x64c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT10__EIM_DATA04 0x1b8 0x4c0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO 0x1b8 0x4c0 0x6a0 0x4 0x2 +#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x1b8 0x4c0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10 0x1b8 0x4c0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10 0x1b8 0x4c0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1bc 0x4c4 0x7a4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT11__KEY_ROW1 0x1bc 0x4c4 0x758 0x1 0x1 +#define MX6SL_PAD_LCD_DAT11__CSI_DATA06 0x1bc 0x4c4 0x648 0x2 0x1 +#define MX6SL_PAD_LCD_DAT11__EIM_DATA05 0x1bc 0x4c4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1 0x1bc 0x4c4 0x6ac 0x4 0x1 +#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x1bc 0x4c4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11 0x1bc 0x4c4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11 0x1bc 0x4c4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1c0 0x4c8 0x7a8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT12__KEY_COL2 0x1c0 0x4c8 0x73c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT12__CSI_DATA05 0x1c0 0x4c8 0x644 0x2 0x1 +#define MX6SL_PAD_LCD_DAT12__EIM_DATA06 0x1c0 0x4c8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B 0x1c0 0x4c8 0x818 0x4 0x2 +#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B 0x1c0 0x4c8 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x1c0 0x4c8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12 0x1c0 0x4c8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12 0x1c0 0x4c8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1c4 0x4cc 0x7ac 0x0 0x1 +#define MX6SL_PAD_LCD_DAT13__KEY_ROW2 0x1c4 0x4cc 0x75c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT13__CSI_DATA04 0x1c4 0x4cc 0x640 0x2 0x1 +#define MX6SL_PAD_LCD_DAT13__EIM_DATA07 0x1c4 0x4cc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B 0x1c4 0x4cc 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B 0x1c4 0x4cc 0x818 0x4 0x3 +#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x1c4 0x4cc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13 0x1c4 0x4cc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13 0x1c4 0x4cc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1c8 0x4d0 0x7b0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT14__KEY_COL3 0x1c8 0x4d0 0x740 0x1 0x1 +#define MX6SL_PAD_LCD_DAT14__CSI_DATA03 0x1c8 0x4d0 0x63c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT14__EIM_DATA08 0x1c8 0x4d0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA 0x1c8 0x4d0 0x81c 0x4 0x2 +#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA 0x1c8 0x4d0 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x1c8 0x4d0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14 0x1c8 0x4d0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14 0x1c8 0x4d0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1cc 0x4d4 0x7b4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT15__KEY_ROW3 0x1cc 0x4d4 0x760 0x1 0x1 +#define MX6SL_PAD_LCD_DAT15__CSI_DATA02 0x1cc 0x4d4 0x638 0x2 0x1 +#define MX6SL_PAD_LCD_DAT15__EIM_DATA09 0x1cc 0x4d4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA 0x1cc 0x4d4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA 0x1cc 0x4d4 0x81c 0x4 0x3 +#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x1cc 0x4d4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15 0x1cc 0x4d4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15 0x1cc 0x4d4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1d0 0x4d8 0x7b8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT16__KEY_COL4 0x1d0 0x4d8 0x744 0x1 0x1 +#define MX6SL_PAD_LCD_DAT16__CSI_DATA01 0x1d0 0x4d8 0x634 0x2 0x1 +#define MX6SL_PAD_LCD_DAT16__EIM_DATA10 0x1d0 0x4d8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT16__I2C2_SCL 0x1d0 0x4d8 0x724 0x4 0x3 +#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x1d0 0x4d8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16 0x1d0 0x4d8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24 0x1d0 0x4d8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1d4 0x4dc 0x7bc 0x0 0x1 +#define MX6SL_PAD_LCD_DAT17__KEY_ROW4 0x1d4 0x4dc 0x764 0x1 0x1 +#define MX6SL_PAD_LCD_DAT17__CSI_DATA00 0x1d4 0x4dc 0x630 0x2 0x1 +#define MX6SL_PAD_LCD_DAT17__EIM_DATA11 0x1d4 0x4dc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT17__I2C2_SDA 0x1d4 0x4dc 0x728 0x4 0x3 +#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x1d4 0x4dc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17 0x1d4 0x4dc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25 0x1d4 0x4dc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1d8 0x4e0 0x7c0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT18__KEY_COL5 0x1d8 0x4e0 0x748 0x1 0x1 +#define MX6SL_PAD_LCD_DAT18__CSI_DATA15 0x1d8 0x4e0 0x66c 0x2 0x0 +#define MX6SL_PAD_LCD_DAT18__EIM_DATA12 0x1d8 0x4e0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1 0x1d8 0x4e0 0x710 0x4 0x1 +#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x1d8 0x4e0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18 0x1d8 0x4e0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26 0x1d8 0x4e0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1dc 0x4e4 0x7c4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT19__KEY_ROW5 0x1dc 0x4e4 0x768 0x1 0x1 +#define MX6SL_PAD_LCD_DAT19__CSI_DATA14 0x1dc 0x4e4 0x668 0x2 0x0 +#define MX6SL_PAD_LCD_DAT19__EIM_DATA13 0x1dc 0x4e4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2 0x1dc 0x4e4 0x714 0x4 0x1 +#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x1dc 0x4e4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19 0x1dc 0x4e4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27 0x1dc 0x4e4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1e0 0x4e8 0x780 0x0 0x1 +#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0 0x1e0 0x4e8 0x68c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT 0x1e0 0x4e8 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT2__PWM3_OUT 0x1e0 0x4e8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT2__AUD4_RXC 0x1e0 0x4e8 0x5ec 0x4 0x1 +#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x1e0 0x4e8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02 0x1e0 0x4e8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02 0x1e0 0x4e8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1e4 0x4ec 0x7c8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT20__KEY_COL6 0x1e4 0x4ec 0x74c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT20__CSI_DATA13 0x1e4 0x4ec 0x664 0x2 0x0 +#define MX6SL_PAD_LCD_DAT20__EIM_DATA14 0x1e4 0x4ec 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1 0x1e4 0x4ec 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x1e4 0x4ec 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20 0x1e4 0x4ec 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28 0x1e4 0x4ec 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1e8 0x4f0 0x7cc 0x0 0x1 +#define MX6SL_PAD_LCD_DAT21__KEY_ROW6 0x1e8 0x4f0 0x76c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT21__CSI_DATA12 0x1e8 0x4f0 0x660 0x2 0x0 +#define MX6SL_PAD_LCD_DAT21__EIM_DATA15 0x1e8 0x4f0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2 0x1e8 0x4f0 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x1e8 0x4f0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21 0x1e8 0x4f0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29 0x1e8 0x4f0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1ec 0x4f4 0x7d0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT22__KEY_COL7 0x1ec 0x4f4 0x750 0x1 0x1 +#define MX6SL_PAD_LCD_DAT22__CSI_DATA11 0x1ec 0x4f4 0x65c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B 0x1ec 0x4f4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3 0x1ec 0x4f4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x1ec 0x4f4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22 0x1ec 0x4f4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30 0x1ec 0x4f4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1f0 0x4f8 0x7d4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT23__KEY_ROW7 0x1f0 0x4f8 0x770 0x1 0x1 +#define MX6SL_PAD_LCD_DAT23__CSI_DATA10 0x1f0 0x4f8 0x658 0x2 0x1 +#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B 0x1f0 0x4f8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN 0x1f0 0x4f8 0x718 0x4 0x1 +#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x1f0 0x4f8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23 0x1f0 0x4f8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31 0x1f0 0x4f8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1f4 0x4fc 0x784 0x0 0x1 +#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK 0x1f4 0x4fc 0x67c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B 0x1f4 0x4fc 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT3__PWM4_OUT 0x1f4 0x4fc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT3__AUD4_RXD 0x1f4 0x4fc 0x5e4 0x4 0x1 +#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x1f4 0x4fc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03 0x1f4 0x4fc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03 0x1f4 0x4fc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1f8 0x500 0x788 0x0 0x1 +#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1 0x1f8 0x500 0x690 0x1 0x1 +#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC 0x1f8 0x500 0x678 0x2 0x2 +#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB 0x1f8 0x500 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT4__AUD4_TXC 0x1f8 0x500 0x5f4 0x4 0x1 +#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x1f8 0x500 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04 0x1f8 0x500 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04 0x1f8 0x500 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1fc 0x504 0x78c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2 0x1fc 0x504 0x694 0x1 0x1 +#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC 0x1fc 0x504 0x670 0x2 0x2 +#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B 0x1fc 0x504 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS 0x1fc 0x504 0x5f8 0x4 0x1 +#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x1fc 0x504 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05 0x1fc 0x504 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05 0x1fc 0x504 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x200 0x508 0x790 0x0 0x1 +#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3 0x200 0x508 0x698 0x1 0x1 +#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK 0x200 0x508 0x674 0x2 0x2 +#define MX6SL_PAD_LCD_DAT6__EIM_DATA00 0x200 0x508 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT6__AUD4_TXD 0x200 0x508 0x5e8 0x4 0x1 +#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x200 0x508 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06 0x200 0x508 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06 0x200 0x508 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x204 0x50c 0x794 0x0 0x1 +#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY 0x204 0x50c 0x680 0x1 0x1 +#define MX6SL_PAD_LCD_DAT7__CSI_MCLK 0x204 0x50c 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT7__EIM_DATA01 0x204 0x50c 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT 0x204 0x50c 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x204 0x50c 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07 0x204 0x50c 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07 0x204 0x50c 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x208 0x510 0x798 0x0 0x1 +#define MX6SL_PAD_LCD_DAT8__KEY_COL0 0x208 0x510 0x734 0x1 0x1 +#define MX6SL_PAD_LCD_DAT8__CSI_DATA09 0x208 0x510 0x654 0x2 0x1 +#define MX6SL_PAD_LCD_DAT8__EIM_DATA02 0x208 0x510 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK 0x208 0x510 0x69c 0x4 0x2 +#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x208 0x510 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08 0x208 0x510 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08 0x208 0x510 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x20c 0x514 0x79c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT9__KEY_ROW0 0x20c 0x514 0x754 0x1 0x1 +#define MX6SL_PAD_LCD_DAT9__CSI_DATA08 0x20c 0x514 0x650 0x2 0x1 +#define MX6SL_PAD_LCD_DAT9__EIM_DATA03 0x20c 0x514 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI 0x20c 0x514 0x6a4 0x4 0x2 +#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x20c 0x514 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09 0x20c 0x514 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09 0x20c 0x514 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x210 0x518 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5 0x210 0x518 0x870 0x1 0x2 +#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E 0x210 0x518 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B 0x210 0x518 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA 0x210 0x518 0x804 0x4 0x2 +#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA 0x210 0x518 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x210 0x518 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x214 0x51c 0x774 0x0 0x0 +#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6 0x214 0x51c 0x874 0x1 0x2 +#define MX6SL_PAD_LCD_HSYNC__LCD_CS 0x214 0x51c 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B 0x214 0x51c 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA 0x214 0x51c 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA 0x214 0x51c 0x804 0x4 0x3 +#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x214 0x51c 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x214 0x51c 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_RESET__LCD_RESET 0x218 0x520 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B 0x218 0x520 0x880 0x1 0x1 +#define MX6SL_PAD_LCD_RESET__LCD_BUSY 0x218 0x520 0x774 0x2 0x1 +#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B 0x218 0x520 0x884 0x3 0x1 +#define MX6SL_PAD_LCD_RESET__UART2_CTS_B 0x218 0x520 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_RESET__UART2_RTS_B 0x218 0x520 0x800 0x4 0x2 +#define MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x218 0x520 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY 0x218 0x520 0x62c 0x6 0x1 +#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x21c 0x524 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7 0x21c 0x524 0x878 0x1 0x2 +#define MX6SL_PAD_LCD_VSYNC__LCD_RS 0x21c 0x524 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B 0x21c 0x524 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B 0x21c 0x524 0x800 0x4 0x3 +#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B 0x21c 0x524 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x21c 0x524 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x21c 0x524 0x000 0x6 0x0 +#define MX6SL_PAD_PWM1__PWM1_OUT 0x220 0x528 0x000 0x0 0x0 +#define MX6SL_PAD_PWM1__CCM_CLKO 0x220 0x528 0x000 0x1 0x0 +#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT 0x220 0x528 0x000 0x2 0x0 +#define MX6SL_PAD_PWM1__FEC_REF_OUT 0x220 0x528 0x000 0x3 0x0 +#define MX6SL_PAD_PWM1__CSI_MCLK 0x220 0x528 0x000 0x4 0x0 +#define MX6SL_PAD_PWM1__GPIO3_IO23 0x220 0x528 0x000 0x5 0x0 +#define MX6SL_PAD_PWM1__EPIT1_OUT 0x220 0x528 0x000 0x6 0x0 +#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0 +#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x224 0x52c 0x72c 0x1 0x2 +#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT 0x224 0x52c 0x000 0x2 0x0 +#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID 0x224 0x52c 0x5e0 0x3 0x2 +#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x224 0x52c 0x62c 0x4 0x2 +#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21 0x224 0x52c 0x000 0x5 0x0 +#define MX6SL_PAD_REF_CLK_24M__SD3_WP 0x224 0x52c 0x84c 0x6 0x3 +#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0 +#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x228 0x530 0x730 0x1 0x2 +#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT 0x228 0x530 0x000 0x2 0x0 +#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x228 0x530 0x5dc 0x3 0x3 +#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL 0x228 0x530 0x000 0x4 0x0 +#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x228 0x530 0x000 0x5 0x0 +#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B 0x228 0x530 0x838 0x6 0x3 +#define MX6SL_PAD_SD1_CLK__SD1_CLK 0x22c 0x534 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_CLK__FEC_MDIO 0x22c 0x534 0x6f4 0x1 0x2 +#define MX6SL_PAD_SD1_CLK__KEY_COL0 0x22c 0x534 0x734 0x2 0x2 +#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4 0x22c 0x534 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x22c 0x534 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_CMD__SD1_CMD 0x230 0x538 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK 0x230 0x538 0x70c 0x1 0x2 +#define MX6SL_PAD_SD1_CMD__KEY_ROW0 0x230 0x538 0x754 0x2 0x2 +#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5 0x230 0x538 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_CMD__GPIO5_IO14 0x230 0x538 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x234 0x53c 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER 0x234 0x53c 0x708 0x1 0x2 +#define MX6SL_PAD_SD1_DAT0__KEY_COL1 0x234 0x53c 0x738 0x2 0x2 +#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6 0x234 0x53c 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x234 0x53c 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x238 0x540 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV 0x238 0x540 0x704 0x1 0x2 +#define MX6SL_PAD_SD1_DAT1__KEY_ROW1 0x238 0x540 0x758 0x2 0x2 +#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7 0x238 0x540 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x238 0x540 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x23c 0x544 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1 0x23c 0x544 0x6fc 0x1 0x2 +#define MX6SL_PAD_SD1_DAT2__KEY_COL2 0x23c 0x544 0x73c 0x2 0x2 +#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8 0x23c 0x544 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x23c 0x544 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x240 0x548 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0 0x240 0x548 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT3__KEY_ROW2 0x240 0x548 0x75c 0x2 0x2 +#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9 0x240 0x548 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x240 0x548 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x244 0x54c 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT4__FEC_MDC 0x244 0x54c 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT4__KEY_COL3 0x244 0x54c 0x740 0x2 0x2 +#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N 0x244 0x54c 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x244 0x54c 0x814 0x4 0x4 +#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA 0x244 0x54c 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x244 0x54c 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x248 0x550 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0 0x248 0x550 0x6f8 0x1 0x2 +#define MX6SL_PAD_SD1_DAT5__KEY_ROW3 0x248 0x550 0x760 0x2 0x2 +#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED 0x248 0x550 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x248 0x550 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA 0x248 0x550 0x814 0x4 0x5 +#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x248 0x550 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x24c 0x554 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN 0x24c 0x554 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT6__KEY_COL4 0x24c 0x554 0x744 0x2 0x2 +#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ 0x24c 0x554 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x24c 0x554 0x810 0x4 0x4 +#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B 0x24c 0x554 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x24c 0x554 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x250 0x558 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1 0x250 0x558 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT7__KEY_ROW4 0x250 0x558 0x764 0x2 0x2 +#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY 0x250 0x558 0x62c 0x3 0x3 +#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x250 0x558 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B 0x250 0x558 0x810 0x4 0x5 +#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x250 0x558 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_CLK__SD2_CLK 0x254 0x55c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_CLK__AUD4_RXFS 0x254 0x55c 0x5f0 0x1 0x2 +#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK 0x254 0x55c 0x6b0 0x2 0x2 +#define MX6SL_PAD_SD2_CLK__CSI_DATA00 0x254 0x55c 0x630 0x3 0x2 +#define MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x254 0x55c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_CMD__SD2_CMD 0x258 0x560 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_CMD__AUD4_RXC 0x258 0x560 0x5ec 0x1 0x2 +#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0 0x258 0x560 0x6c0 0x2 0x2 +#define MX6SL_PAD_SD2_CMD__CSI_DATA01 0x258 0x560 0x634 0x3 0x2 +#define MX6SL_PAD_SD2_CMD__EPIT1_OUT 0x258 0x560 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x258 0x560 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x25c 0x564 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT0__AUD4_RXD 0x25c 0x564 0x5e4 0x1 0x2 +#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI 0x25c 0x564 0x6bc 0x2 0x2 +#define MX6SL_PAD_SD2_DAT0__CSI_DATA02 0x25c 0x564 0x638 0x3 0x2 +#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B 0x25c 0x564 0x818 0x4 0x4 +#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B 0x25c 0x564 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x25c 0x564 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x260 0x568 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT1__AUD4_TXC 0x260 0x568 0x5f4 0x1 0x2 +#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO 0x260 0x568 0x6b8 0x2 0x2 +#define MX6SL_PAD_SD2_DAT1__CSI_DATA03 0x260 0x568 0x63c 0x3 0x2 +#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B 0x260 0x568 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B 0x260 0x568 0x818 0x4 0x5 +#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x260 0x568 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x264 0x56c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS 0x264 0x56c 0x5f8 0x1 0x2 +#define MX6SL_PAD_SD2_DAT2__FEC_COL 0x264 0x56c 0x6f0 0x2 0x1 +#define MX6SL_PAD_SD2_DAT2__CSI_DATA04 0x264 0x56c 0x640 0x3 0x2 +#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA 0x264 0x56c 0x81c 0x4 0x4 +#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA 0x264 0x56c 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x264 0x56c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x268 0x570 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT3__AUD4_TXD 0x268 0x570 0x5e8 0x1 0x2 +#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK 0x268 0x570 0x700 0x2 0x1 +#define MX6SL_PAD_SD2_DAT3__CSI_DATA05 0x268 0x570 0x644 0x3 0x2 +#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA 0x268 0x570 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA 0x268 0x570 0x81c 0x4 0x5 +#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x268 0x570 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x26c 0x574 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT4__SD3_DATA4 0x26c 0x574 0x83c 0x1 0x1 +#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA 0x26c 0x574 0x804 0x2 0x4 +#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA 0x26c 0x574 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT4__CSI_DATA06 0x26c 0x574 0x648 0x3 0x2 +#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT 0x26c 0x574 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x26c 0x574 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x270 0x578 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT5__SD3_DATA5 0x270 0x578 0x840 0x1 0x1 +#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA 0x270 0x578 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA 0x270 0x578 0x804 0x2 0x5 +#define MX6SL_PAD_SD2_DAT5__CSI_DATA07 0x270 0x578 0x64c 0x3 0x2 +#define MX6SL_PAD_SD2_DAT5__SPDIF_IN 0x270 0x578 0x7f0 0x4 0x2 +#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31 0x270 0x578 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x274 0x57c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT6__SD3_DATA6 0x274 0x57c 0x844 0x1 0x1 +#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B 0x274 0x57c 0x800 0x2 0x4 +#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B 0x274 0x57c 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT6__CSI_DATA08 0x274 0x57c 0x650 0x3 0x2 +#define MX6SL_PAD_SD2_DAT6__SD2_WP 0x274 0x57c 0x834 0x4 0x2 +#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x274 0x57c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x278 0x580 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT7__SD3_DATA7 0x278 0x580 0x848 0x1 0x1 +#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B 0x278 0x580 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B 0x278 0x580 0x800 0x2 0x5 +#define MX6SL_PAD_SD2_DAT7__CSI_DATA09 0x278 0x580 0x654 0x3 0x2 +#define MX6SL_PAD_SD2_DAT7__SD2_CD_B 0x278 0x580 0x830 0x4 0x2 +#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x278 0x580 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_RST__SD2_RESET 0x27c 0x584 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_RST__FEC_REF_OUT 0x27c 0x584 0x000 0x1 0x0 +#define MX6SL_PAD_SD2_RST__WDOG2_B 0x27c 0x584 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_RST__SPDIF_OUT 0x27c 0x584 0x000 0x3 0x0 +#define MX6SL_PAD_SD2_RST__CSI_MCLK 0x27c 0x584 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_RST__GPIO4_IO27 0x27c 0x584 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CLK__SD3_CLK 0x280 0x588 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_CLK__AUD5_RXFS 0x280 0x588 0x608 0x1 0x1 +#define MX6SL_PAD_SD3_CLK__KEY_COL5 0x280 0x588 0x748 0x2 0x2 +#define MX6SL_PAD_SD3_CLK__CSI_DATA10 0x280 0x588 0x658 0x3 0x2 +#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x280 0x588 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x280 0x588 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR 0x280 0x588 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_CMD__SD3_CMD 0x284 0x58c 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_CMD__AUD5_RXC 0x284 0x58c 0x604 0x1 0x1 +#define MX6SL_PAD_SD3_CMD__KEY_ROW5 0x284 0x58c 0x768 0x2 0x2 +#define MX6SL_PAD_SD3_CMD__CSI_DATA11 0x284 0x58c 0x65c 0x3 0x2 +#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID 0x284 0x58c 0x5e0 0x4 0x3 +#define MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x284 0x58c 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR 0x284 0x58c 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x288 0x590 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT0__AUD5_RXD 0x288 0x590 0x5fc 0x1 0x1 +#define MX6SL_PAD_SD3_DAT0__KEY_COL6 0x288 0x590 0x74c 0x2 0x2 +#define MX6SL_PAD_SD3_DAT0__CSI_DATA12 0x288 0x590 0x660 0x3 0x1 +#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x288 0x590 0x5dc 0x4 0x4 +#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x288 0x590 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x28c 0x594 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT1__AUD5_TXC 0x28c 0x594 0x60c 0x1 0x1 +#define MX6SL_PAD_SD3_DAT1__KEY_ROW6 0x28c 0x594 0x76c 0x2 0x2 +#define MX6SL_PAD_SD3_DAT1__CSI_DATA13 0x28c 0x594 0x664 0x3 0x1 +#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT 0x28c 0x594 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x28c 0x594 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B 0x28c 0x594 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x290 0x598 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS 0x290 0x598 0x610 0x1 0x1 +#define MX6SL_PAD_SD3_DAT2__KEY_COL7 0x290 0x598 0x750 0x2 0x2 +#define MX6SL_PAD_SD3_DAT2__CSI_DATA14 0x290 0x598 0x668 0x3 0x1 +#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT 0x290 0x598 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x290 0x598 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x290 0x598 0x820 0x6 0x3 +#define MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x294 0x59c 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT3__AUD5_TXD 0x294 0x59c 0x600 0x1 0x1 +#define MX6SL_PAD_SD3_DAT3__KEY_ROW7 0x294 0x59c 0x770 0x2 0x2 +#define MX6SL_PAD_SD3_DAT3__CSI_DATA15 0x294 0x59c 0x66c 0x3 0x1 +#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT 0x294 0x59c 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x294 0x59c 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC 0x294 0x59c 0x824 0x6 0x2 +#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x298 0x5a0 0x7fc 0x0 0x0 +#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x298 0x5a0 0x000 0x0 0x0 +#define MX6SL_PAD_UART1_RXD__PWM1_OUT 0x298 0x5a0 0x000 0x1 0x0 +#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA 0x298 0x5a0 0x814 0x2 0x6 +#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA 0x298 0x5a0 0x000 0x2 0x0 +#define MX6SL_PAD_UART1_RXD__FEC_COL 0x298 0x5a0 0x6f0 0x3 0x2 +#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA 0x298 0x5a0 0x81c 0x4 0x6 +#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA 0x298 0x5a0 0x000 0x4 0x0 +#define MX6SL_PAD_UART1_RXD__GPIO3_IO16 0x298 0x5a0 0x000 0x5 0x0 +#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x29c 0x5a4 0x000 0x0 0x0 +#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA 0x29c 0x5a4 0x7fc 0x0 0x1 +#define MX6SL_PAD_UART1_TXD__PWM2_OUT 0x29c 0x5a4 0x000 0x1 0x0 +#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA 0x29c 0x5a4 0x000 0x2 0x0 +#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA 0x29c 0x5a4 0x814 0x2 0x7 +#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK 0x29c 0x5a4 0x700 0x3 0x2 +#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA 0x29c 0x5a4 0x000 0x4 0x0 +#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA 0x29c 0x5a4 0x81c 0x4 0x7 +#define MX6SL_PAD_UART1_TXD__GPIO3_IO17 0x29c 0x5a4 0x000 0x5 0x0 +#define MX6SL_PAD_UART1_TXD__UART5_DCD_B 0x29c 0x5a4 0x000 0x7 0x0 +#define MX6SL_PAD_WDOG_B__WDOG1_B 0x2a0 0x5a8 0x000 0x0 0x0 +#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x2a0 0x5a8 0x000 0x1 0x0 +#define MX6SL_PAD_WDOG_B__UART5_RI_B 0x2a0 0x5a8 0x000 0x2 0x0 +#define MX6SL_PAD_WDOG_B__GPIO3_IO18 0x2a0 0x5a8 0x000 0x5 0x0 + +#endif /* __DTS_IMX6SL_PINFUNC_H */ diff --git a/arch/arm/dts/imx6sl.dtsi b/arch/arm/dts/imx6sl.dtsi new file mode 100644 index 0000000..cc9572e --- /dev/null +++ b/arch/arm/dts/imx6sl.dtsi @@ -0,0 +1,927 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6sl-pinfunc.h" +#include <dt-bindings/clock/imx6sl-clock.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + + aliases { + ethernet0 = &fec; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1225000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, + <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>, + <&clks IMX6SL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + clocks = <&clks IMX6SL_CLK_OCRAM>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6sl-spdif", + "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>, + <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_ECSPI1>, + <&clks IMX6SL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_ECSPI2>, + <&clks IMX6SL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_ECSPI3>, + <&clks IMX6SL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_ECSPI4>, + <&clks IMX6SL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@02018000 { + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@02024000 { + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6sl-ssi", + "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_SSI1_IPG>, + <&clks IMX6SL_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, + <&sdma 38 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6sl-ssi", + "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_SSI2_IPG>, + <&clks IMX6SL_CLK_SSI2>; + clock-names = "ipg", "baud"; + dmas = <&sdma 41 1 0>, + <&sdma 42 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6sl-ssi", + "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_SSI3_IPG>, + <&clks IMX6SL_CLK_SSI3>; + clock-names = "ipg", "baud"; + dmas = <&sdma 45 1 0>, + <&sdma 46 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + uart3: serial@02034000 { + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@02038000 { + compatible = "fsl,imx6sl-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02038000 0x4000>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_UART>, + <&clks IMX6SL_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + pwm1: pwm@02080000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_PWM1>, + <&clks IMX6SL_CLK_PWM1>; + clock-names = "ipg", "per"; + }; + + pwm2: pwm@02084000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_PWM2>, + <&clks IMX6SL_CLK_PWM2>; + clock-names = "ipg", "per"; + }; + + pwm3: pwm@02088000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_PWM3>, + <&clks IMX6SL_CLK_PWM3>; + clock-names = "ipg", "per"; + }; + + pwm4: pwm@0208c000 { + #pwm-cells = <2>; + compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_PWM4>, + <&clks IMX6SL_CLK_PWM4>; + clock-names = "ipg", "per"; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_GPT>, + <&clks IMX6SL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, + <0 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 22 1>, <&iomuxc 1 20 2>, + <&iomuxc 3 23 1>, <&iomuxc 4 25 1>, + <&iomuxc 5 24 1>, <&iomuxc 6 19 1>, + <&iomuxc 7 36 2>, <&iomuxc 9 44 8>, + <&iomuxc 17 38 6>, <&iomuxc 23 68 4>, + <&iomuxc 27 64 4>, <&iomuxc 31 52 1>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 53 3>, <&iomuxc 3 72 2>, + <&iomuxc 5 34 2>, <&iomuxc 7 57 4>, + <&iomuxc 11 56 1>, <&iomuxc 12 61 3>, + <&iomuxc 15 107 1>, <&iomuxc 16 132 2>, + <&iomuxc 18 135 1>, <&iomuxc 19 134 1>, + <&iomuxc 20 108 2>, <&iomuxc 22 120 1>, + <&iomuxc 23 125 7>, <&iomuxc 30 110 2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 112 8>, <&iomuxc 8 121 4>, + <&iomuxc 12 97 4>, <&iomuxc 16 166 3>, + <&iomuxc 19 85 2>, <&iomuxc 21 137 2>, + <&iomuxc 23 136 1>, <&iomuxc 24 91 1>, + <&iomuxc 25 99 1>, <&iomuxc 26 92 1>, + <&iomuxc 27 100 1>, <&iomuxc 28 93 1>, + <&iomuxc 29 101 1>, <&iomuxc 30 94 1>, + <&iomuxc 31 102 1>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, + <0 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 95 1>, <&iomuxc 1 103 1>, + <&iomuxc 2 96 1>, <&iomuxc 3 104 1>, + <&iomuxc 4 97 1>, <&iomuxc 5 105 1>, + <&iomuxc 6 98 1>, <&iomuxc 7 106 1>, + <&iomuxc 8 28 1>, <&iomuxc 9 27 1>, + <&iomuxc 10 26 1>, <&iomuxc 11 29 1>, + <&iomuxc 12 32 1>, <&iomuxc 13 31 1>, + <&iomuxc 14 30 1>, <&iomuxc 15 33 1>, + <&iomuxc 16 84 1>, <&iomuxc 17 79 2>, + <&iomuxc 19 78 1>, <&iomuxc 20 76 1>, + <&iomuxc 21 81 2>, <&iomuxc 23 75 1>, + <&iomuxc 24 83 1>, <&iomuxc 25 74 1>, + <&iomuxc 26 77 1>, <&iomuxc 27 159 1>, + <&iomuxc 28 154 1>, <&iomuxc 29 157 1>, + <&iomuxc 30 152 1>, <&iomuxc 31 156 1>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, + <0 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 158 1>, <&iomuxc 1 151 1>, + <&iomuxc 2 155 1>, <&iomuxc 3 153 1>, + <&iomuxc 4 150 1>, <&iomuxc 5 149 1>, + <&iomuxc 6 144 1>, <&iomuxc 7 147 1>, + <&iomuxc 8 142 1>, <&iomuxc 9 146 1>, + <&iomuxc 10 148 1>, <&iomuxc 11 141 1>, + <&iomuxc 12 145 1>, <&iomuxc 13 143 1>, + <&iomuxc 14 140 1>, <&iomuxc 15 139 1>, + <&iomuxc 16 164 2>, <&iomuxc 18 160 1>, + <&iomuxc 19 162 1>, <&iomuxc 20 163 1>, + <&iomuxc 21 161 1>; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_DUMMY>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sl-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, + <0 54 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + + regulator-1p1 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2850000>; + }; + + reg_arm: regulator-vddcore { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddarm"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pu: regulator-vddpu { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USBPHY2>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + status = "disabled"; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sl-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, + <0 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + pu-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + #power-domain-cells = <1>; + }; + + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6sl-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sl-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + csi: csi@020e4000 { + reg = <0x020e4000 0x4000>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + spdc: spdc@020e8000 { + reg = <0x020e8000 0x4000>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_SDMA>, + <&clks IMX6SL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + /* imx6sl reuses imx6q sdma firmware */ + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + pxp: pxp@020f0000 { + reg = <0x020f0000 0x4000>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; + }; + + epdc: epdc@020f4000 { + reg = <0x020f4000 0x4000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + }; + + lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@020fc000 { + compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, + <0 100 IRQ_TYPE_LEVEL_HIGH>, + <0 101 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbh: usb@02184400 { + compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SL_CLK_USBOH3>; + }; + + fec: ethernet@02188000 { + compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; + reg = <0x02188000 0x4000>; + interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_ENET>, + <&clks IMX6SL_CLK_ENET_REF>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USDHC1>, + <&clks IMX6SL_CLK_USDHC1>, + <&clks IMX6SL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USDHC2>, + <&clks IMX6SL_CLK_USDHC2>, + <&clks IMX6SL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USDHC3>, + <&clks IMX6SL_CLK_USDHC3>, + <&clks IMX6SL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_USDHC4>, + <&clks IMX6SL_CLK_USDHC4>, + <&clks IMX6SL_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + rngb: rngb@021b4000 { + reg = <0x021b4000 0x4000>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; + reg = <0x021b8000 0x4000>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; + }; + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6sl-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SL_CLK_OCOTP>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi new file mode 100644 index 0000000..c129100 --- /dev/null +++ b/arch/arm/dts/meson-gx.dtsi @@ -0,0 +1,447 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@10000000 { + reg = <0x0 0x10000000 0x0 0x200000>; + no-map; + }; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + clocks = <&scpi_dvfs 0>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; + }; + }; + + efuse: efuse { + compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; + #address-cells = <1>; + #size-cells = <1>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + + scpi { + compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + scpi_clocks: clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>; + clock-output-names = "vcpu"; + }; + }; + + scpi_sensors: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cbus: cbus@c1100000 { + compatible = "simple-bus"; + reg = <0x0 0xc1100000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + + reset: reset-controller@4404 { + compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + + uart_A: serial@84c0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84c0 0x0 0x14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_B: serial@84dc { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84dc 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x08500 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@8650 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08650 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x086c0 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_C: serial@8700 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x8700 0x0 0x14>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087c0 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_C: i2c@87e0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087e0 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + watchdog@98d0 { + compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; + reg = <0x0 0x098d0 0x0 0x10>; + clocks = <&xtal>; + }; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,gic-400"; + reg = <0x0 0xc4301000 0 0x1000>, + <0x0 0xc4302000 0 0x2000>, + <0x0 0xc4304000 0 0x2000>, + <0x0 0xc4306000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + sram: sram@c8000000 { + compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; + reg = <0x0 0xc8000000 0x0 0x14000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xc8000000 0x14000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + + aobus: aobus@c8100000 { + compatible = "simple-bus"; + reg = <0x0 0xc8100000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + + uart_AO: serial@4c0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x004c0 0x0 0x14>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_AO_B: serial@4e0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x004e0 0x0 0x14>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + ir: ir@580 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x00580 0x0 0x40>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + periphs: periphs@c8834000 { + compatible = "simple-bus"; + reg = <0x0 0xc8834000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + + rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x0 0x0 0x4>; + }; + }; + + + hiubus: hiubus@c883c000 { + compatible = "simple-bus"; + reg = <0x0 0xc883c000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + + mailbox: mailbox@404 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0x404 0 0x4c>; + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, + <0 209 IRQ_TYPE_EDGE_RISING>, + <0 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + }; + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + status = "disabled"; + }; + + apb: apb@d0000000 { + compatible = "simple-bus"; + reg = <0x0 0xd0000000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; + + sd_emmc_a: mmc@70000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x70000 0x0 0x2000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + sd_emmc_b: mmc@72000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x72000 0x0 0x2000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + sd_emmc_c: mmc@74000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x74000 0x0 0x2000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + vpu: vpu@d0100000 { + compatible = "amlogic,meson-gx-vpu"; + reg = <0x0 0xd0100000 0x0 0x100000>, + <0x0 0xc883c000 0x0 0x1000>, + <0x0 0xc8838000 0x0 0x1000>; + reg-names = "vpu", "hhi", "dmc"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + }; + }; +}; diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index 79bee64..c737183 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -64,6 +64,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + usb_otg_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_OTG_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + leds { compatible = "gpio-leds"; blue { @@ -73,6 +85,60 @@ default-state = "off"; }; }; + + tflash_vdd: regulator-tflash_vdd { + /* + * signal name from schematics: TFLASH_VDD_EN + */ + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + /* + * signal name from schematics: TF_3V3N_1V8_EN + */ + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; +}; + +&scpi_clocks { + status = "disabled"; }; &uart_AO { @@ -83,6 +149,85 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + eee-broken-1000t; + }; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_otg_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* SD */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc3v3>; + vqmmc-supply = <&vcc1v8>; +}; diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index e502c24..39a774a 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -40,307 +40,477 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "meson-gx.dtsi" #include <dt-bindings/gpio/meson-gxbb-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> +#include <dt-bindings/clock/gxbb-clkc.h> +#include <dt-bindings/clock/gxbb-aoclkc.h> +#include <dt-bindings/reset/gxbb-aoclkc.h> / { compatible = "amlogic,meson-gxbb"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "psci"; + soc { + usb0_phy: phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000000 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + status = "disabled"; }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "psci"; + usb1_phy: phy@c0000020 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000020 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + status = "disabled"; }; - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "psci"; + usb0: usb@c9000000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9000000 0x0 0x40000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; }; - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "psci"; + usb1: usb@c9100000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9100000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; }; }; +}; - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +&cbus { + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; }; +}; + +ðmac { + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; +}; + +&aobus { + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxbb-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_cts_ao_a", + "uart_rts_ao_a"; + function = "uart_ao"; + }; + }; + + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_tx_ao_b", "uart_rx_ao_b"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { + mux { + groups = "uart_cts_ao_b", + "uart_rts_ao_b"; + function = "uart_ao_b"; + }; + }; - psci { - compatible = "arm,psci-0.2"; - method = "smc"; + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; + }; + }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>; + clkc_AO: clock-controller@040 { + compatible = "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; }; - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; + pwm_ab_AO: pwm@550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x0550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; }; - soc { - compatible = "simple-bus"; + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; + +&periphs { + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxbb-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; ranges; - cbus: cbus@c1100000 { - compatible = "simple-bus"; - reg = <0x0 0xc1100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; - - reset: reset-controller@4404 { - compatible = "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; - #reset-cells = <1>; - }; - - uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84c0 0x0 0x14>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; - }; - - uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84dc 0x0 0x14>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; - }; - - uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x8700 0x0 0x14>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; - }; - }; - - gic: interrupt-controller@c4301000 { - compatible = "arm,gic-400"; - reg = <0x0 0xc4301000 0 0x1000>, - <0x0 0xc4302000 0 0x2000>, - <0x0 0xc4304000 0 0x2000>, - <0x0 0xc4306000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - aobus: aobus@c8100000 { - compatible = "simple-bus"; - reg = <0x0 0xc8100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-gxbb-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - }; - - uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x004c0 0x0 0x14>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; - }; - }; - - periphs: periphs@c8834000 { - compatible = "simple-bus"; - reg = <0x0 0xc8834000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; - - rng { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x0 0x0 0x4>; - }; - - pinctrl_periphs: pinctrl@4b0 { - compatible = "amlogic,meson-gxbb-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@4b0 { - reg = <0x0 0x004b0 0x0 0x28>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, - <0x0 0x00430 0x0 0x40>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - emmc_pins: emmc { - mux { - groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; - function = "emmc"; - }; - }; - - sdcard_pins: sdcard { - mux { - groups = "sdcard_d0", - "sdcard_d1", - "sdcard_d2", - "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; - function = "sdcard"; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - }; - }; - - uart_b_pins: uart_b { - mux { - groups = "uart_tx_b", - "uart_rx_b"; - function = "uart_b"; - }; - }; - - uart_c_pins: uart_c { - mux { - groups = "uart_tx_c", - "uart_rx_c"; - function = "uart_c"; - }; - }; - - eth_pins: eth_c { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_clk_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_rxd2", - "eth_rxd3", - "eth_rgmii_tx_clk", - "eth_tx_en", - "eth_txd0", - "eth_txd1", - "eth_txd2", - "eth_txd3"; - function = "eth"; - }; - }; - }; - }; - - hiubus: hiubus@c883c000 { - compatible = "simple-bus"; - reg = <0x0 0xc883c000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; - - clkc: clock-controller@0 { - compatible = "amlogic,gxbb-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; - }; - }; - - apb: apb@d0000000 { - compatible = "simple-bus"; - reg = <0x0 0xd0000000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; - }; - - ethmac: ethernet@c9410000 { - compatible = "amlogic,meson6-dwmac", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - interrupts = <0 8 1>; - interrupt-names = "macirq"; - clocks = <&xtal>; - clock-names = "stmmaceth"; - phy-mode = "rgmii"; - status = "disabled"; + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk", + "emmc_ds"; + function = "emmc"; + }; + }; + + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart_a_cts_rts { + mux { + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_b_cts_rts_pins: uart_b_cts_rts { + mux { + groups = "uart_cts_b", + "uart_rts_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + uart_c_cts_rts_pins: uart_c_cts_rts { + mux { + groups = "uart_cts_c", + "uart_rts_c"; + function = "uart_c"; + }; + }; + + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; + }; + }; + + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; + + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_tx_en", + "eth_txd0", + "eth_txd1"; + function = "eth"; + }; + }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; + + hdmi_hpd_pins: hdmi_hpd { + mux { + groups = "hdmi_hpd"; + function = "hdmi_hpd"; + }; + }; + + hdmi_i2c_pins: hdmi_i2c { + mux { + groups = "hdmi_sda", "hdmi_scl"; + function = "hdmi_i2c"; + }; }; }; }; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + +&sd_emmc_a { + clocks = <&clkc CLKID_SD_EMMC_A>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_b { + clocks = <&clkc CLKID_SD_EMMC_B>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_c { + clocks = <&clkc CLKID_SD_EMMC_C>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&vpu { + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi new file mode 100644 index 0000000..84ee089 --- /dev/null +++ b/arch/arm/dts/sama5d3.dtsi @@ -0,0 +1,1539 @@ +/* + * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> + +/ { + model = "Atmel SAMA5D3 family SoC"; + compatible = "atmel,sama5d3", "atmel,sama5"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + serial5 = &uart0; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + ssc0 = &ssc0; + ssc1 = &ssc1; + pwm0 = &pwm0; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0x0>; + }; + }; + + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x20000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + u-boot,dm-pre-reloc; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + u-boot,dm-pre-reloc; + + mmc0: mmc@f0000000 { + compatible = "atmel,hsmci"; + reg = <0xf0000000 0x600>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + }; + + spi0: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + ssc0: ssc@f0008000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0008000 0x4000>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + tcb0: timer@f0010000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf0010000 0x100>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + i2c0: i2c@f0014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf0014000 0x4000>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + i2c1: i2c@f0018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf0018000 0x4000>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + + usart0: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@f0020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0020000 0x100>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart0: serial@f0024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0024000 0x100>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + pwm0: pwm@f002c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf002c000 0x300>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + + isi: isi@f0034000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0034000 0x4000>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sfr: sfr@f0038000 { + compatible = "atmel,sama5d3-sfr", "syscon"; + reg = <0xf0038000 0x60>; + }; + + mmc1: mmc@f8000000 { + compatible = "atmel,hsmci"; + reg = <0xf8000000 0x600>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; + }; + + spi1: spi@f8008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf8008000 0x100>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(16)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + ssc1: ssc@f800c000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf800c000 0x4000>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + adc0: adc@f8018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-adc"; + reg = <0xf8018000 0x100>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + &pinctrl_adc0_ad10 + &pinctrl_adc0_ad11 + >; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-channels-used = <0xfff>; + atmel,adc-startup-time = <40>; + atmel,adc-use-external-triggers; + atmel,adc-vref = <3000>; + atmel,adc-res = <10 12>; + atmel,adc-sample-hold-time = <11>; + atmel,adc-res-names = "lowres", "highres"; + status = "disabled"; + + trigger@0 { + reg = <0>; + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + reg = <1>; + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + trigger@2 { + reg = <2>; + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + trigger@3 { + reg = <3>; + trigger-name = "continuous"; + trigger-value = <0x6>; + }; + }; + + i2c2: i2c@f801c000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf801c000 0x4000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi2_clk>; + status = "disabled"; + }; + + usart2: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart3: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x100>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + sha@f8034000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf8034000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; + }; + + aes@f8038000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; + }; + + tdes@f803c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf803c000 0x100>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + }; + + trng@f8040000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xf8040000 0x100>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + + dma0: dma-controller@ffffe600 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffe600 0x200>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + + dma1: dma-controller@ffffe800 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffe800 0x200>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + + ramc0: ramc@ffffea00 { + compatible = "atmel,sama5d3-ddramc"; + reg = <0xffffea00 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; + }; + + dbgu: serial@ffffee00 { + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xffffee00 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&dbgu_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,sama5d3-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <47>; + }; + + pinctrl@fffff200 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */ + 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */ + 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */ + 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */ + 0xffffffff 0xbf9f8000 0x18000000 /* pioE */ + >; + reg = <0xfffff200 0x100 /* pioA */ + 0xfffff400 0x100 /* pioB */ + 0xfffff600 0x100 /* pioC */ + 0xfffff800 0x100 /* pioD */ + 0xfffffa00 0x100 /* pioE */ + >; + + /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = + <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = + <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = + <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = + <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = + <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = + <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = + <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = + <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = + <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ + }; + pinctrl_adc0_ad8: adc0_ad8 { + atmel,pins = + <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ + }; + pinctrl_adc0_ad9: adc0_ad9 { + atmel,pins = + <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ + }; + pinctrl_adc0_ad10: adc0_ad10 { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ + }; + pinctrl_adc0_ad11: adc0_ad11 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ + }; + }; + + dbgu { + u-boot,dm-pre-reloc; + pinctrl_dbgu: dbgu-0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + }; + }; + + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ + }; + }; + + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + }; + + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */ + AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */ + }; + }; + + mmc0 { + u-boot,dm-pre-reloc; + pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ + AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ + }; + pinctrl_mmc0_dat1_3: mmc0_dat1_3 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ + }; + pinctrl_mmc0_dat4_7: mmc0_dat4_7 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + }; + }; + + mmc1 { + u-boot,dm-pre-reloc; + pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + }; + pinctrl_mmc1_dat1_3: mmc1_dat1_3 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + }; + }; + + nand0 { + pinctrl_nand0_ale_cle: nand0_ale_cle-0 { + atmel,pins = + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ + }; + }; + + pwm0 { + pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */ + }; + pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */ + }; + pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */ + }; + pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */ + }; + + pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { + atmel,pins = + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */ + }; + pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */ + }; + pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { + atmel,pins = + <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */ + }; + pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */ + }; + pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { + atmel,pins = + <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */ + }; + pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */ + }; + + pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */ + }; + pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */ + }; + pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */ + }; + pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */ + }; + + pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */ + }; + pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { + atmel,pins = + <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */ + }; + pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */ + }; + pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { + atmel,pins = + <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */ + }; + }; + + spi0 { + u-boot,dm-pre-reloc; + pinctrl_spi0: spi0-0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + u-boot,dm-pre-reloc; + pinctrl_spi1: spi1-0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx { + atmel,pins = + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ + }; + + pinctrl_ssc0_rx: ssc0_rx { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx { + atmel,pins = + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ + AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ + AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ + }; + + pinctrl_ssc1_rx: ssc1_rx { + atmel,pins = + <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* conflicts with TWCK0, ISI_HSYNC */ + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ + }; + + pinctrl_usart0_rts_cts: usart0_rts_cts-0 { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ + }; + + pinctrl_usart1_rts_cts: usart1_rts_cts-0 { + atmel,pins = + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ + }; + + pinctrl_usart2_rts_cts: usart2_rts_cts-0 { + atmel,pins = + <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ + AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ + }; + + pinctrl_usart3_rts_cts: usart3_rts_cts-0 { + atmel,pins = + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ + }; + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + u-boot,dm-pre-reloc; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + u-boot,dm-pre-reloc; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + u-boot,dm-pre-reloc; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioD_clk>; + u-boot,dm-pre-reloc; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioE_clk>; + u-boot,dm-pre-reloc; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,sama5d3-pmc", "syscon"; + reg = <0xfffffc00 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + u-boot,dm-pre-reloc; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; + }; + + plla: pllack@0 { + compatible = "atmel,sama5d3-clk-pll"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <8000000 50000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 166000000>; + atmel,clk-divisors = <1 2 4 3>; + u-boot,dm-pre-reloc; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: progck@0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: progck@1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: progck@2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck@2 { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck@4 { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck@6 { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck@7 { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck@8 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck@9 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck@10 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + u-boot,dm-pre-reloc; + + dbgu_clk: dbgu_clk@2 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <2>; + }; + + hsmc_clk: hsmc_clk@5 { + #clock-cells = <0>; + reg = <5>; + }; + + pioA_clk: pioA_clk@6 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <6>; + }; + + pioB_clk: pioB_clk@7 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <7>; + }; + + pioC_clk: pioC_clk@8 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <8>; + }; + + pioD_clk: pioD_clk@9 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <9>; + }; + + pioE_clk: pioE_clk@10 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <10>; + }; + + usart0_clk: usart0_clk@12 { + #clock-cells = <0>; + reg = <12>; + atmel,clk-output-range = <0 66000000>; + }; + + usart1_clk: usart1_clk@13 { + #clock-cells = <0>; + reg = <13>; + atmel,clk-output-range = <0 66000000>; + }; + + usart2_clk: usart2_clk@14 { + #clock-cells = <0>; + reg = <14>; + atmel,clk-output-range = <0 66000000>; + }; + + usart3_clk: usart3_clk@15 { + #clock-cells = <0>; + reg = <15>; + atmel,clk-output-range = <0 66000000>; + }; + + uart0_clk: uart0_clk@16 { + #clock-cells = <0>; + reg = <16>; + atmel,clk-output-range = <0 66000000>; + }; + + twi0_clk: twi0_clk@18 { + reg = <18>; + #clock-cells = <0>; + atmel,clk-output-range = <0 16625000>; + }; + + twi1_clk: twi1_clk@19 { + #clock-cells = <0>; + reg = <19>; + atmel,clk-output-range = <0 16625000>; + }; + + twi2_clk: twi2_clk@20 { + #clock-cells = <0>; + reg = <20>; + atmel,clk-output-range = <0 16625000>; + }; + + mci0_clk: mci0_clk@21 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <21>; + }; + + mci1_clk: mci1_clk@22 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <22>; + }; + + spi0_clk: spi0_clk@24 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <24>; + atmel,clk-output-range = <0 133000000>; + }; + + spi1_clk: spi1_clk@25 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <25>; + atmel,clk-output-range = <0 133000000>; + }; + + tcb0_clk: tcb0_clk@26 { + #clock-cells = <0>; + reg = <26>; + atmel,clk-output-range = <0 133000000>; + }; + + pwm_clk: pwm_clk@28 { + #clock-cells = <0>; + reg = <28>; + }; + + adc_clk: adc_clk@29 { + #clock-cells = <0>; + reg = <29>; + atmel,clk-output-range = <0 66000000>; + }; + + dma0_clk: dma0_clk@30 { + #clock-cells = <0>; + reg = <30>; + }; + + dma1_clk: dma1_clk@31 { + #clock-cells = <0>; + reg = <31>; + }; + + uhphs_clk: uhphs_clk@32 { + #clock-cells = <0>; + reg = <32>; + }; + + udphs_clk: udphs_clk@33 { + #clock-cells = <0>; + reg = <33>; + }; + + isi_clk: isi_clk@37 { + #clock-cells = <0>; + reg = <37>; + }; + + ssc0_clk: ssc0_clk@38 { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 66000000>; + }; + + ssc1_clk: ssc1_clk@39 { + #clock-cells = <0>; + reg = <39>; + atmel,clk-output-range = <0 66000000>; + }; + + sha_clk: sha_clk@42 { + #clock-cells = <0>; + reg = <42>; + }; + + aes_clk: aes_clk@43 { + #clock-cells = <0>; + reg = <43>; + }; + + tdes_clk: tdes_clk@44 { + #clock-cells = <0>; + reg = <44>; + }; + + trng_clk: trng_clk@45 { + #clock-cells = <0>; + reg = <45>; + }; + + fuse_clk: fuse_clk@48 { + #clock-cells = <0>; + reg = <48>; + }; + + mpddr_clk: mpddr_clk@49 { + #clock-cells = <0>; + reg = <49>; + }; + }; + }; + + rstc@fffffe00 { + compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; + }; + + shutdown-controller@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&mck>; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + atmel,watchdog-type = "hardware"; + atmel,reset-type = "all"; + atmel,dbg-halt; + status = "disabled"; + }; + + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + }; + }; + + usb0: gadget@00500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,sama5d3-udc"; + reg = <0x00500000 0x100000 + 0xf8030000 0x4000>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0: endpoint@0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1: endpoint@1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2: endpoint@2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3: endpoint@3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep4: endpoint@4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep5: endpoint@5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep6: endpoint@6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep7i: endpoint@7 { + reg = <7>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep8: endpoint@8 { + reg = <8>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep9: endpoint@9 { + reg = <9>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep10: endpoint@10 { + reg = <10>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep11: endpoint@11 { + reg = <11>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep12: endpoint@12 { + reg = <12>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep13: endpoint@13 { + reg = <13>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep14: endpoint@14 { + reg = <14>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep15: endpoint@15 { + reg = <15>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + }; + + usb1: ohci@00600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: ehci@00700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; + status = "disabled"; + }; + + nand0: nand@60000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < 0x60000000 0x01000000 /* EBI CS3 */ + 0xffffc070 0x00000490 /* SMC PMECC regs */ + 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */ + 0x00110000 0x00018000 /* ROM code */ + >; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand0_ale_cle>; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + status = "disabled"; + + nfc@70000000 { + compatible = "atmel,sama5d3-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < + 0x70000000 0x08000000 /* NFC Command Registers */ + 0xffffc000 0x00000070 /* NFC HSMC regs */ + 0x00200000 0x00100000 /* NFC SRAM banks */ + >; + clocks = <&hsmc_clk>; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d31.dtsi b/arch/arm/dts/sama5d31.dtsi new file mode 100644 index 0000000..883878b --- /dev/null +++ b/arch/arm/dts/sama5d31.dtsi @@ -0,0 +1,16 @@ +/* + * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/dts/sama5d31ek.dts b/arch/arm/dts/sama5d31ek.dts new file mode 100644 index 0000000..988f865 --- /dev/null +++ b/arch/arm/dts/sama5d31ek.dts @@ -0,0 +1,56 @@ +/* + * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d31.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D31-EK"; + compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + leds { + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sama5d33.dtsi b/arch/arm/dts/sama5d33.dtsi new file mode 100644 index 0000000..4b4434a --- /dev/null +++ b/arch/arm/dts/sama5d33.dtsi @@ -0,0 +1,14 @@ +/* + * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_gmac.dtsi" + +/ { + compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/dts/sama5d33ek.dts b/arch/arm/dts/sama5d33ek.dts new file mode 100644 index 0000000..a2aff7a --- /dev/null +++ b/arch/arm/dts/sama5d33ek.dts @@ -0,0 +1,49 @@ +/* + * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d33.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D33-EK"; + compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sama5d34.dtsi b/arch/arm/dts/sama5d34.dtsi new file mode 100644 index 0000000..aa01573 --- /dev/null +++ b/arch/arm/dts/sama5d34.dtsi @@ -0,0 +1,16 @@ +/* + * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_mci2.dtsi" + +/ { + compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/dts/sama5d34ek.dts b/arch/arm/dts/sama5d34ek.dts new file mode 100644 index 0000000..556ba65 --- /dev/null +++ b/arch/arm/dts/sama5d34ek.dts @@ -0,0 +1,66 @@ +/* + * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d34.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D34-EK"; + compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + + 24c256@50 { + compatible = "24c256"; + reg = <0x50>; + pagesize = <64>; + }; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + }; + }; + + leds { + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sama5d35.dtsi b/arch/arm/dts/sama5d35.dtsi new file mode 100644 index 0000000..16c39f4 --- /dev/null +++ b/arch/arm/dts/sama5d35.dtsi @@ -0,0 +1,18 @@ +/* + * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_uart.dtsi" +#include "sama5d3_tcb1.dtsi" + +/ { + compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/dts/sama5d35ek.dts b/arch/arm/dts/sama5d35ek.dts new file mode 100644 index 0000000..4e37cfd --- /dev/null +++ b/arch/arm/dts/sama5d35ek.dts @@ -0,0 +1,59 @@ +/* + * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d35.dtsi" +#include "sama5d3xmb.dtsi" + +/ { + model = "Atmel SAMA5D35-EK"; + compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + isi: isi@f0034000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + wakeup-source; + }; + }; +}; diff --git a/arch/arm/dts/sama5d36.dtsi b/arch/arm/dts/sama5d36.dtsi new file mode 100644 index 0000000..e85139e --- /dev/null +++ b/arch/arm/dts/sama5d36.dtsi @@ -0,0 +1,20 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <josh.wu@atmel.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/dts/sama5d36ek.dts b/arch/arm/dts/sama5d36ek.dts new file mode 100644 index 0000000..1fa7989 --- /dev/null +++ b/arch/arm/dts/sama5d36ek.dts @@ -0,0 +1,57 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <josh.wu@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sama5d36ek_cmp.dts b/arch/arm/dts/sama5d36ek_cmp.dts new file mode 100644 index 0000000..be41490 --- /dev/null +++ b/arch/arm/dts/sama5d36ek_cmp.dts @@ -0,0 +1,55 @@ +/* + * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb_cmp.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + aliases { + spi0 = &spi0; + }; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sama5d3_can.dtsi b/arch/arm/dts/sama5d3_can.dtsi new file mode 100644 index 0000000..177f088 --- /dev/null +++ b/arch/arm/dts/sama5d3_can.dtsi @@ -0,0 +1,74 @@ +/* + * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with + * CAN support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ + }; + }; + + }; + + pmc: pmc@fffffc00 { + periphck { + can0_clk: can0_clk@40 { + #clock-cells = <0>; + reg = <40>; + atmel,clk-output-range = <0 66000000>; + }; + + can1_clk: can1_clk@41 { + #clock-cells = <0>; + reg = <41>; + atmel,clk-output-range = <0 66000000>; + }; + }; + }; + + can0: can@f000c000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf000c000 0x300>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + clocks = <&can0_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + + can1: can@f8010000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8010000 0x300>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + clocks = <&can1_clk>; + clock-names = "can_clk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3_emac.dtsi b/arch/arm/dts/sama5d3_emac.dtsi new file mode 100644 index 0000000..b654e50 --- /dev/null +++ b/arch/arm/dts/sama5d3_emac.dtsi @@ -0,0 +1,55 @@ +/* + * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with + * Ethernet. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + macb1_clk: macb1_clk@35 { + #clock-cells = <0>; + reg = <35>; + }; + }; + }; + + macb1: ethernet@f802c000 { + compatible = "cdns,at91sam9260-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3_gmac.dtsi b/arch/arm/dts/sama5d3_gmac.dtsi new file mode 100644 index 0000000..81f6367 --- /dev/null +++ b/arch/arm/dts/sama5d3_gmac.dtsi @@ -0,0 +1,88 @@ +/* + * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with + * Gigabit Ethernet. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + macb0 { + pinctrl_macb0_data_rgmii: macb0_data_rgmii { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ + }; + pinctrl_macb0_data_gmii: macb0_data_gmii { + atmel,pins = + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ + }; + pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ + }; + pinctrl_macb0_signal_gmii: macb0_signal_gmii { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ + }; + + }; + }; + + pmc: pmc@fffffc00 { + periphck { + macb0_clk: macb0_clk@34 { + #clock-cells = <0>; + reg = <34>; + }; + }; + }; + + macb0: ethernet@f0028000 { + compatible = "atmel,sama5d3-gem"; + reg = <0xf0028000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3_lcd.dtsi b/arch/arm/dts/sama5d3_lcd.dtsi new file mode 100644 index 0000000..14d7c2b --- /dev/null +++ b/arch/arm/dts/sama5d3_lcd.dtsi @@ -0,0 +1,215 @@ +/* + * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with + * LCD support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + + pinctrl@fffff200 { + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; + + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; + + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + + pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + lcdc_clk: lcdc_clk@36 { + #clock-cells = <0>; + reg = <36>; + }; + }; + + systemck { + lcdck: lcdck@3 { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3_mci2.dtsi b/arch/arm/dts/sama5d3_mci2.dtsi new file mode 100644 index 0000000..2d289ed --- /dev/null +++ b/arch/arm/dts/sama5d3_mci2.dtsi @@ -0,0 +1,59 @@ +/* + * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with + * 3 MMC ports + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/at91.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + mmc2 { + pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ + }; + pinctrl_mmc2_dat1_3: mmc2_dat1_3 { + atmel,pins = + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + mci2_clk: mci2_clk@23 { + #clock-cells = <0>; + reg = <23>; + }; + }; + }; + + mmc2: mmc@f8004000 { + compatible = "atmel,hsmci"; + reg = <0xf8004000 0x600>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; + clocks = <&mci2_clk>; + clock-names = "mci_clk"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3_tcb1.dtsi b/arch/arm/dts/sama5d3_tcb1.dtsi new file mode 100644 index 0000000..5be60b4 --- /dev/null +++ b/arch/arm/dts/sama5d3_tcb1.dtsi @@ -0,0 +1,39 @@ +/* + * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with + * 2 TC blocks. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/at91.h> + +/ { + aliases { + tcb1 = &tcb1; + }; + + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + tcb1_clk: tcb1_clk@27 { + #clock-cells = <0>; + reg = <27>; + }; + }; + }; + + tcb1: timer@f8014000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8014000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3_uart.dtsi b/arch/arm/dts/sama5d3_uart.dtsi new file mode 100644 index 0000000..6a547fd --- /dev/null +++ b/arch/arm/dts/sama5d3_uart.dtsi @@ -0,0 +1,79 @@ +/* + * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with + * UART support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/at91.h> + +/ { + aliases { + serial5 = &uart0; + serial6 = &uart1; + }; + + ahb { + apb { + pinctrl@fffff200 { + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + }; + }; + }; + + pmc: pmc@fffffc00 { + periphck { + uart0_clk: uart0_clk@16 { + #clock-cells = <0>; + reg = <16>; + atmel,clk-output-range = <0 66000000>; + }; + + uart1_clk: uart1_clk@17 { + #clock-cells = <0>; + reg = <17>; + atmel,clk-output-range = <0 66000000>; + }; + }; + }; + + uart0: serial@f0024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0024000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart1: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3xcm.dtsi b/arch/arm/dts/sama5d3xcm.dtsi new file mode 100644 index 0000000..2cf9c36 --- /dev/null +++ b/arch/arm/dts/sama5d3xcm.dtsi @@ -0,0 +1,123 @@ +/* + * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3xcm_cmp.dtsi b/arch/arm/dts/sama5d3xcm_cmp.dtsi new file mode 100644 index 0000000..77638c3 --- /dev/null +++ b/arch/arm/dts/sama5d3xcm_cmp.dtsi @@ -0,0 +1,166 @@ +/* + * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ + +/ { + compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + + i2c1: i2c@f0018000 { + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "disabled"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddana_reg: LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3xdm.dtsi b/arch/arm/dts/sama5d3xdm.dtsi new file mode 100644 index 0000000..035ab72 --- /dev/null +++ b/arch/arm/dts/sama5d3xdm.dtsi @@ -0,0 +1,41 @@ +/* + * sama5d3dm.dtsi - Device Tree file for SAMA5 display module + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + i2c1: i2c@f0018000 { + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <31 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + }; + + adc0: adc@f8018000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */ + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/sama5d3xmb.dtsi b/arch/arm/dts/sama5d3xmb.dtsi new file mode 100644 index 0000000..f9ef905 --- /dev/null +++ b/arch/arm/dts/sama5d3xmb.dtsi @@ -0,0 +1,234 @@ +/* + * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3xcm.dtsi" + +/ { + compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &dbgu; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + u-boot,dm-pre-reloc; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + }; + }; + + spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + u-boot,dm-pre-reloc; + + spi_flash@0 { + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + u-boot,dm-pre-reloc; + }; + }; + + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + }; + }; + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + u-boot,dm-pre-reloc; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + /*interrupt-parent = <&pioE>;*/ + /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ + reg = <1>; + }; + }; + + pinctrl@fffff200 { + board { + u-boot,dm-pre-reloc; + pinctrl_mmc0_cd: mmc0_cd { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ + }; + + pinctrl_mmc1_cd: mmc1_cd { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ + }; + + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ + }; + }; + }; + + dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ + status = "okay"; + u-boot,dm-pre-reloc; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH + &pioD 26 GPIO_ACTIVE_LOW + &pioD 27 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/sama5d3xmb_cmp.dtsi b/arch/arm/dts/sama5d3xmb_cmp.dtsi new file mode 100644 index 0000000..77f989c --- /dev/null +++ b/arch/arm/dts/sama5d3xmb_cmp.dtsi @@ -0,0 +1,236 @@ +/* + * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3xcm_cmp.dtsi" + +/ { + compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &dbgu; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + }; + }; + + spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + + spi_flash@0 { + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + }; + }; + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + /*interrupt-parent = <&pioE>;*/ + /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ + reg = <1>; + }; + }; + + pinctrl@fffff200 { + board { + pinctrl_gpio_keys: gpio_keys { + atmel,pins = + <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ + }; + + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ + }; + }; + }; + + dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ + status = "okay"; + u-boot,dm-pre-reloc; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "disabled"; + }; + + /* Conflict with LCD pins */ + gpio_keys { + compatible = "gpio-keys"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi new file mode 100644 index 0000000..c6512ae --- /dev/null +++ b/arch/arm/dts/sama5d4.dtsi @@ -0,0 +1,1935 @@ +/* + * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Atmel SAMA5D4 family SoC"; + compatible = "atmel,sama5d4"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &usart3; + serial1 = &usart4; + serial2 = &usart2; + serial3 = &usart0; + serial4 = &usart1; + serial5 = &uart0; + serial6 = &uart1; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + pwm0 = &pwm0; + ssc0 = &ssc0; + ssc1 = &ssc1; + tcb0 = &tcb0; + tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + + ns_sram: sram@00210000 { + compatible = "mmio-sram"; + reg = <0x00210000 0x10000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + u-boot,dm-pre-reloc; + + usb0: gadget@00400000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,sama5d3-udc"; + reg = <0x00400000 0x100000 + 0xfc02c000 0x4000>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0: endpoint@0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1: endpoint@1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2: endpoint@2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3: endpoint@3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep4: endpoint@4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep5: endpoint@5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6: endpoint@6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep7: endpoint@7 { + reg = <7>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep8: endpoint@8 { + reg = <8>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep9: endpoint@9 { + reg = <9>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep10: endpoint@10 { + reg = <10>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep11: endpoint@11 { + reg = <11>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep12: endpoint@12 { + reg = <12>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep13: endpoint@13 { + reg = <13>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep14: endpoint@14 { + reg = <14>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep15: endpoint@15 { + reg = <15>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + }; + + usb1: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: ehci@00600000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00600000 0x100000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; + status = "disabled"; + }; + + L2: cache-controller@00a00000 { + compatible = "arm,pl310-cache"; + reg = <0x00a00000 0x1000>; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; + cache-unified; + cache-level = <2>; + }; + + nand0: nand@80000000 { + compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < 0x80000000 0x08000000 /* EBI CS3 */ + 0xfc05c070 0x00000490 /* SMC PMECC regs */ + 0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */ + >; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + status = "disabled"; + + nfc@90000000 { + compatible = "atmel,sama5d3-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < + 0x90000000 0x08000000 /* NFC Command Registers */ + 0xfc05c000 0x00000070 /* NFC HSMC regs */ + 0x00100000 0x00100000 /* NFC SRAM banks */ + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + u-boot,dm-pre-reloc; + + hlcdc: hlcdc@f0000000 { + compatible = "atmel,sama5d4-hlcdc"; + reg = <0xf0000000 0x4000>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + + dma1: dma-controller@f0004000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0004000 0x200>; + interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + + isi: isi@f0008000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0008000 0x4000>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + ramc0: ramc@f0010000 { + compatible = "atmel,sama5d3-ddramc"; + reg = <0xf0010000 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; + }; + + dma0: dma-controller@f0014000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0014000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + + pmc: pmc@f0018000 { + compatible = "atmel,sama5d3-pmc", "syscon"; + reg = <0xf0018000 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + u-boot,dm-pre-reloc; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <100000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; + u-boot,dm-pre-reloc; + }; + + plla: pllack@0 { + compatible = "atmel,sama5d3-clk-pll"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <12000000 12000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + u-boot,dm-pre-reloc; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <125000000 200000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + h32ck: h32mxck { + #clock-cells = <0>; + compatible = "atmel,sama5d4-clk-h32mx"; + clocks = <&mck>; + u-boot,dm-pre-reloc; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog@0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog@1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog@2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + u-boot,dm-pre-reloc; + + ddrck: ddrck@2 { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + lcdck: lcdck@3 { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + + smdck: smdck@4 { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpcki@6 { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck@7 { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0@8 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1@9 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2@10 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + }; + + periph32ck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&h32ck>; + u-boot,dm-pre-reloc; + + pioD_clk: pioD_clk@5 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk@6 { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk@7 { + #clock-cells = <0>; + reg = <7>; + }; + + icm_clk: icm_clk@9 { + #clock-cells = <0>; + reg = <9>; + }; + + aes_clk: aes_clk@12 { + #clock-cells = <0>; + reg = <12>; + }; + + tdes_clk: tdes_clk@14 { + #clock-cells = <0>; + reg = <14>; + }; + + sha_clk: sha_clk@15 { + #clock-cells = <0>; + reg = <15>; + }; + + matrix1_clk: matrix1_clk@17 { + #clock-cells = <0>; + reg = <17>; + }; + + hsmc_clk: hsmc_clk@22 { + #clock-cells = <0>; + reg = <22>; + }; + + pioA_clk: pioA_clk@23 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <23>; + }; + + pioB_clk: pioB_clk@24 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <24>; + }; + + pioC_clk: pioC_clk@25 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <25>; + }; + + pioE_clk: pioE_clk@26 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <26>; + }; + + uart0_clk: uart0_clk@27 { + #clock-cells = <0>; + reg = <27>; + }; + + uart1_clk: uart1_clk@28 { + #clock-cells = <0>; + reg = <28>; + }; + + usart2_clk: usart2_clk@29 { + #clock-cells = <0>; + reg = <29>; + }; + + usart3_clk: usart3_clk@30 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <30>; + }; + + usart4_clk: usart4_clk@31 { + #clock-cells = <0>; + reg = <31>; + }; + + twi0_clk: twi0_clk@32 { + reg = <32>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk@33 { + #clock-cells = <0>; + reg = <33>; + }; + + twi2_clk: twi2_clk@34 { + #clock-cells = <0>; + reg = <34>; + }; + + mci0_clk: mci0_clk@35 { + #clock-cells = <0>; + reg = <35>; + }; + + mci1_clk: mci1_clk@36 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <36>; + }; + + spi0_clk: spi0_clk@37 { + u-boot,dm-pre-reloc; + #clock-cells = <0>; + reg = <37>; + }; + + spi1_clk: spi1_clk@38 { + #clock-cells = <0>; + reg = <38>; + }; + + spi2_clk: spi2_clk@39 { + #clock-cells = <0>; + reg = <39>; + }; + + tcb0_clk: tcb0_clk@40 { + #clock-cells = <0>; + reg = <40>; + }; + + tcb1_clk: tcb1_clk@41 { + #clock-cells = <0>; + reg = <41>; + }; + + tcb2_clk: tcb2_clk@42 { + #clock-cells = <0>; + reg = <42>; + }; + + pwm_clk: pwm_clk@43 { + #clock-cells = <0>; + reg = <43>; + }; + + adc_clk: adc_clk@44 { + #clock-cells = <0>; + reg = <44>; + }; + + dbgu_clk: dbgu_clk@45 { + #clock-cells = <0>; + reg = <45>; + }; + + uhphs_clk: uhphs_clk@46 { + #clock-cells = <0>; + reg = <46>; + }; + + udphs_clk: udphs_clk@47 { + #clock-cells = <0>; + reg = <47>; + }; + + ssc0_clk: ssc0_clki@48 { + #clock-cells = <0>; + reg = <48>; + }; + + ssc1_clk: ssc1_clk@49 { + #clock-cells = <0>; + reg = <49>; + }; + + trng_clk: trng_clk@53 { + #clock-cells = <0>; + reg = <53>; + }; + + macb0_clk: macb0_clk@54 { + #clock-cells = <0>; + reg = <54>; + }; + + macb1_clk: macb1_clk@55 { + #clock-cells = <0>; + reg = <55>; + }; + + fuse_clk: fuse_clk@57 { + #clock-cells = <0>; + reg = <57>; + }; + + securam_clk: securam_clk@59 { + #clock-cells = <0>; + reg = <59>; + }; + + smd_clk: smd_clk@61 { + #clock-cells = <0>; + reg = <61>; + }; + + twi3_clk: twi3_clk@62 { + #clock-cells = <0>; + reg = <62>; + }; + + catb_clk: catb_clk@63 { + #clock-cells = <0>; + reg = <63>; + }; + }; + + periph64ck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + dma0_clk: dma0_clk@8 { + #clock-cells = <0>; + reg = <8>; + }; + + cpkcc_clk: cpkcc_clk@10 { + #clock-cells = <0>; + reg = <10>; + }; + + aesb_clk: aesb_clk@13 { + #clock-cells = <0>; + reg = <13>; + }; + + mpddr_clk: mpddr_clk@16 { + #clock-cells = <0>; + reg = <16>; + }; + + matrix0_clk: matrix0_clk@18 { + #clock-cells = <0>; + reg = <18>; + }; + + vdec_clk: vdec_clk@19 { + #clock-cells = <0>; + reg = <19>; + }; + + dma1_clk: dma1_clk@50 { + #clock-cells = <0>; + reg = <50>; + }; + + lcdc_clk: lcdc_clk@51 { + #clock-cells = <0>; + reg = <51>; + }; + + isi_clk: isi_clk@52 { + #clock-cells = <0>; + reg = <52>; + }; + }; + }; + + mmc0: mmc@f8000000 { + compatible = "atmel,hsmci"; + reg = <0xf8000000 0x600>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(0))>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + }; + + uart0: serial@f8004000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8004000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(22))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + ssc0: ssc@f8008000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf8008000 0x4000>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(26))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + pwm0: pwm@f800c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf800c000 0x300>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + + spi0: spi@f8010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf8010000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(10))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + i2c0: i2c@f8014000 { + compatible = "atmel,sama5d4-i2c"; + reg = <0xf8014000 0x4000>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(2))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + i2c1: i2c@f8018000 { + compatible = "atmel,sama5d4-i2c"; + reg = <0xf8018000 0x4000>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(4))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + + tcb0: timer@f801c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf801c000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + macb0: ethernet@f8020000 { + compatible = "atmel,sama5d4-gem"; + reg = <0xf8020000 0x100>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + i2c2: i2c@f8024000 { + compatible = "atmel,sama5d4-i2c"; + reg = <0xf8024000 0x4000>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(6))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi2_clk>; + status = "disabled"; + }; + + sfr: sfr@f8028000 { + compatible = "atmel,sama5d4-sfr", "syscon"; + reg = <0xf8028000 0x60>; + }; + + usart0: serial@f802c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf802c000 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@f8030000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8030000 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + mmc1: mmc@fc000000 { + compatible = "atmel,hsmci"; + reg = <0xfc000000 0x600>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(1))>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; + }; + + uart1: serial@fc004000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc004000 0x100>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(24))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@fc008000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc008000 0x100>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(16))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart3: serial@fc00c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc00c000 0x100>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(18))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart4: serial@fc010000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc010000 0x100>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(20))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart4>; + clocks = <&usart4_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + ssc1: ssc@fc014000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xfc014000 0x4000>; + interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(28))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + spi1: spi@fc018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc018000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi2: spi@fc01c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc01c000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(14))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&spi2_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + tcb1: timer@fc020000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xfc020000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + macb1: ethernet@fc028000 { + compatible = "atmel,sama5d4-gem"; + reg = <0xfc028000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + trng@fc030000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfc030000 0x100>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + + adc0: adc@fc034000 { + compatible = "atmel,at91sam9x5-adc"; + reg = <0xfc034000 0x100>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-channels-used = <0x01f>; + atmel,adc-startup-time = <40>; + atmel,adc-use-external-triggers; + atmel,adc-vref = <3000>; + atmel,adc-res = <8 10>; + atmel,adc-sample-hold-time = <11>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-ts-pressure-threshold = <10000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + trigger@0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + reg = <0>; + }; + trigger@1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + reg = <1>; + }; + trigger@2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + reg = <2>; + }; + trigger@3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + reg = <3>; + }; + }; + + aes@fc044000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xfc044000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(41))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(40))>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; + status = "okay"; + }; + + tdes@fc04c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xfc04c000 0x100>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(42))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(43))>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + status = "okay"; + }; + + sha@fc050000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xfc050000 0x100>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(44))>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; + status = "okay"; + }; + + rstc@fc068600 { + compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; + reg = <0xfc068600 0x10>; + clocks = <&clk32k>; + }; + + shdwc@fc068610 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfc068610 0x10>; + clocks = <&clk32k>; + }; + + pit: timer@fc068630 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfc068630 0x10>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&h32ck>; + }; + + watchdog@fc068640 { + compatible = "atmel,sama5d4-wdt"; + reg = <0xfc068640 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + + sckc@fc068650 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfc068650 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <250000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fc0686b0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfc0686b0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + }; + + dbgu: serial@fc069000 { + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xfc069000 0x200>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&dbgu_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + pioA: gpio@fc06a000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06a000 0x100>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fc06b000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06b000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fc06c000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06c000 0x100>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + u-boot,dm-pre-reloc; + }; + + pioD: gpio@fc068000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc068000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioD_clk>; + }; + + pioE: gpio@fc06d000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06d000 0x100>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioE_clk>; + }; + + pinctrl@fc06a000 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfc068000 0xfc068000 0x100 + 0xfc06a000 0xfc06a000 0x4000>; + /* WARNING: revisit as pin spec has changed */ + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ + 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ + 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ + 0x0003ff00 0x8002a800 0x00000000 /* pioD */ + 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ + >; + reg = < 0xfc06a000 0x100 + 0xfc06b000 0x100 + 0xfc06c000 0x100 + 0xfc068000 0x100 + 0xfc06d000 0x100 + >; + + /* pinctrl pin settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with USBA_VBUS */ + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = + <AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */ + AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */ + }; + }; + + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */ + AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */ + }; + }; + + isi { + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D1 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D2 */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D3 */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D4 */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D5 */ + AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D6 */ + AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D7 */ + AT91_PIOB 1 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_PCK, conflict with G0_RXCK */ + AT91_PIOB 3 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_VSYNC */ + AT91_PIOB 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_HSYNC */ + }; + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D8, conflicts with SPI0_MISO, PWMH2 */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */ + }; + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */ + AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */ + }; + }; + + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + pinctrl_lcd_rgb777: lcd-rgb-3 { + atmel,pins = + /* LCDDAT0 conflicts with TMS */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + /* LCDDAT8 conflicts with TCK */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + /* LCDDAT16 conflicts with NTRST */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + pinctrl_lcd_rgb888: lcd-rgb-4 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX0 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX1 */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX0 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXDV */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXER */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXEN */ + AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXCK */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDIO */ + >; + }; + }; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */ + AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */ + AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */ + >; + }; + }; + + mmc0 { + pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { + atmel,pins = + <AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */ + AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDA, conflict with NAND_D0 */ + AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA0, conflict with NAND_D1 */ + >; + }; + pinctrl_mmc0_dat1_3: mmc0_dat1_3 { + atmel,pins = + <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA1, conflict with NAND_D2 */ + AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA2, conflict with NAND_D3 */ + AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA3, conflict with NAND_D4 */ + >; + }; + pinctrl_mmc0_dat4_7: mmc0_dat4_7 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA4, conflict with NAND_D5 */ + AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA5, conflict with NAND_D6 */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA6, conflict with NAND_D7 */ + AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA7, conflict with NAND_OE */ + >; + }; + }; + + mmc1 { + u-boot,dm-pre-reloc; + pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* MCI1_CK */ + AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_CDA */ + AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA0 */ + >; + }; + pinctrl_mmc1_dat1_3: mmc1_dat1_3 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA1 */ + AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA2 */ + AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA3 */ + >; + }; + }; + + nand0 { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A Read Enable */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A Write Enable */ + + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC17 ALE */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC18 CLE */ + + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC15 NCS3/Chip Enable */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC16 NANDRDY */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 Data bit 0 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 Data bit 1 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 Data bit 2 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 Data bit 3 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 Data bit 4 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 Data bit 5 */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A Data bit 6 */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC12 periph A Data bit 7 */ + }; + }; + + spi0 { + u-boot,dm-pre-reloc; + pinctrl_spi0: spi0-0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MISO */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MOSI */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_SPCK */ + >; + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx { + atmel,pins = + <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK0 */ + AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF0 */ + AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD0 */ + }; + + pinctrl_ssc0_rx: ssc0_rx { + atmel,pins = + <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK0 */ + AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF0 */ + AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD0 */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK1 */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF1 */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD1 */ + }; + + pinctrl_ssc1_rx: ssc1_rx { + atmel,pins = + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK1 */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF1 */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD1 */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */ + >; + }; + }; + + spi2 { + pinctrl_spi2: spi2-0 { + atmel,pins = + <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */ + AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */ + AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */ + >; + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */ + AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD - conflicts with G0_CRS, ISI_HSYNC */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD - conflicts with G0_COL, PCK2 */ + >; + }; + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_RX3, PWMH1 */ + }; + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_TXER, ISI_VSYNC */ + }; + }; + + usart3 { + u-boot,dm-pre-reloc; + pinctrl_usart3: usart3-0 { + u-boot,dm-pre-reloc; + atmel,pins = + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + usart4 { + pinctrl_usart4: usart4-0 { + atmel,pins = + <AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart4_rts: usart4_rts-0 { + atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with NWAIT, A19 */ + }; + pinctrl_usart4_cts: usart4_cts-0 { + atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with A0/NBS0, MCI0_CDB */ + }; + }; + }; + + aic: interrupt-controller@fc06e000 { + #interrupt-cells = <3>; + compatible = "atmel,sama5d4-aic"; + interrupt-controller; + reg = <0xfc06e000 0x200>; + atmel,external-irqs = <56>; + }; + }; + }; +}; diff --git a/arch/arm/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/dts/socfpga_cyclone5_mcvevk.dts index 7d3f989..833a87d 100644 --- a/arch/arm/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/dts/socfpga_cyclone5_mcvevk.dts @@ -7,7 +7,7 @@ #include "socfpga_cyclone5.dtsi" / { - model = "DENX MCVEVK"; + model = "Aries MCVEVK"; compatible = "altr,socfpga-cyclone5", "altr,socfpga"; chosen { @@ -54,5 +54,6 @@ }; &usb1 { + disable-over-current; status = "okay"; }; diff --git a/arch/arm/dts/socfpga_cyclone5_socdk.dts b/arch/arm/dts/socfpga_cyclone5_socdk.dts index d4df1a1..f175ef2 100644 --- a/arch/arm/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/dts/socfpga_cyclone5_socdk.dts @@ -54,10 +54,18 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + &gpio1 { status = "okay"; }; +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h new file mode 100644 index 0000000..a09e034 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/sd_emmc.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2016 Carlo Caione <carlo@caione.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SD_EMMC_H__ +#define __SD_EMMC_H__ + +#include <mmc.h> + +#define SDIO_PORT_A 0 +#define SDIO_PORT_B 1 +#define SDIO_PORT_C 2 + +#define SD_EMMC_CLKSRC_24M 24000000 /* 24 MHz */ +#define SD_EMMC_CLKSRC_DIV2 1000000000 /* 1 GHz */ + +#define MESON_SD_EMMC_CLOCK 0x00 +#define CLK_MAX_DIV 63 +#define CLK_SRC_24M (0 << 6) +#define CLK_SRC_DIV2 (1 << 6) +#define CLK_CO_PHASE_000 (0 << 8) +#define CLK_CO_PHASE_090 (1 << 8) +#define CLK_CO_PHASE_180 (2 << 8) +#define CLK_CO_PHASE_270 (3 << 8) +#define CLK_TX_PHASE_000 (0 << 10) +#define CLK_TX_PHASE_090 (1 << 10) +#define CLK_TX_PHASE_180 (2 << 10) +#define CLK_TX_PHASE_270 (3 << 10) +#define CLK_ALWAYS_ON BIT(24) + +#define MESON_SD_EMMC_CFG 0x44 +#define CFG_BUS_WIDTH_MASK GENMASK(1, 0) +#define CFG_BUS_WIDTH_1 0 +#define CFG_BUS_WIDTH_4 1 +#define CFG_BUS_WIDTH_8 2 +#define CFG_BL_LEN_MASK GENMASK(7, 4) +#define CFG_BL_LEN_SHIFT 4 +#define CFG_BL_LEN_512 (9 << 4) +#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8) +#define CFG_RESP_TIMEOUT_256 (8 << 8) +#define CFG_RC_CC_MASK GENMASK(15, 12) +#define CFG_RC_CC_16 (4 << 12) +#define CFG_SDCLK_ALWAYS_ON BIT(18) +#define CFG_AUTO_CLK BIT(23) + +#define MESON_SD_EMMC_STATUS 0x48 +#define STATUS_MASK GENMASK(15, 0) +#define STATUS_ERR_MASK GENMASK(12, 0) +#define STATUS_RXD_ERR_MASK GENMASK(7, 0) +#define STATUS_TXD_ERR BIT(8) +#define STATUS_DESC_ERR BIT(9) +#define STATUS_RESP_ERR BIT(10) +#define STATUS_RESP_TIMEOUT BIT(11) +#define STATUS_DESC_TIMEOUT BIT(12) +#define STATUS_END_OF_CHAIN BIT(13) + +#define MESON_SD_EMMC_IRQ_EN 0x4c + +#define MESON_SD_EMMC_CMD_CFG 0x50 +#define CMD_CFG_LENGTH_MASK GENMASK(8, 0) +#define CMD_CFG_BLOCK_MODE BIT(9) +#define CMD_CFG_R1B BIT(10) +#define CMD_CFG_END_OF_CHAIN BIT(11) +#define CMD_CFG_TIMEOUT_4S (12 << 12) +#define CMD_CFG_NO_RESP BIT(16) +#define CMD_CFG_DATA_IO BIT(18) +#define CMD_CFG_DATA_WR BIT(19) +#define CMD_CFG_RESP_NOCRC BIT(20) +#define CMD_CFG_RESP_128 BIT(21) +#define CMD_CFG_CMD_INDEX_SHIFT 24 +#define CMD_CFG_OWNER BIT(31) + +#define MESON_SD_EMMC_CMD_ARG 0x54 +#define MESON_SD_EMMC_CMD_DAT 0x58 +#define MESON_SD_EMMC_CMD_RSP 0x5c +#define MESON_SD_EMMC_CMD_RSP1 0x60 +#define MESON_SD_EMMC_CMD_RSP2 0x64 +#define MESON_SD_EMMC_CMD_RSP3 0x68 + +struct meson_mmc_platdata { + struct mmc_config cfg; + struct mmc mmc; + void *regbase; + void *w_buf; +}; + +#endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c index a03abfc..28c8cf2 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c @@ -18,45 +18,45 @@ unsigned int has_lcdc() void at91_serial0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_serial3_hw_init(void) { - at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ - at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ at91_periph_clk_enable(ATMEL_ID_USART3); } void at91_seriald_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ at91_periph_clk_enable(ATMEL_ID_SYS); } #ifdef CONFIG_ATMEL_SPI void at91_spi0_hw_init(unsigned long cs_mask) { - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ at91_periph_clk_enable(ATMEL_ID_SPI0); @@ -72,9 +72,9 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_pio3_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_pio3_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ at91_periph_clk_enable(ATMEL_ID_SPI1); @@ -91,12 +91,12 @@ void at91_spi1_hw_init(unsigned long cs_mask) void at91_mci_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ - at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ at91_periph_clk_enable(ATMEL_ID_HSMCI0); } @@ -104,37 +104,37 @@ void at91_mci_hw_init(void) #ifdef CONFIG_LCD void at91_lcd_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */ - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ - at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ - at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */ + + at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ at91_periph_clk_enable(ATMEL_ID_LCDC); } diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c index 3e4555a..8de086e 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c @@ -64,32 +64,32 @@ char *get_cpu_name() void at91_seriald_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ at91_periph_clk_enable(ATMEL_ID_SYS); } void at91_serial0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ at91_periph_clk_enable(ATMEL_ID_USART2); } @@ -97,12 +97,12 @@ void at91_serial2_hw_init(void) void at91_mci_hw_init(void) { /* Initialize the MCI0 */ - at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */ - at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ at91_periph_clk_enable(ATMEL_ID_HSMCI0); } @@ -110,20 +110,20 @@ void at91_mci_hw_init(void) #ifdef CONFIG_ATMEL_SPI void at91_spi0_hw_init(unsigned long cs_mask) { - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); if (cs_mask & (1 << 1)) - at91_set_b_periph(AT91_PIO_PORTA, 7, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTA, 7, 0); if (cs_mask & (1 << 2)) - at91_set_b_periph(AT91_PIO_PORTA, 1, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTA, 1, 0); if (cs_mask & (1 << 3)) - at91_set_b_periph(AT91_PIO_PORTB, 3, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTB, 3, 0); if (cs_mask & (1 << 4)) at91_set_pio_output(AT91_PIO_PORTA, 14, 0); if (cs_mask & (1 << 5)) @@ -136,20 +136,20 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_pio3_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_pio3_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) - at91_set_b_periph(AT91_PIO_PORTA, 8, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTA, 8, 0); if (cs_mask & (1 << 1)) - at91_set_b_periph(AT91_PIO_PORTA, 0, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTA, 0, 0); if (cs_mask & (1 << 2)) - at91_set_b_periph(AT91_PIO_PORTA, 31, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTA, 31, 0); if (cs_mask & (1 << 3)) - at91_set_b_periph(AT91_PIO_PORTA, 30, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTA, 30, 0); if (cs_mask & (1 << 4)) at91_set_pio_output(AT91_PIO_PORTA, 8, 0); if (cs_mask & (1 << 5)) @@ -181,45 +181,45 @@ void at91_macb_hw_init(void) /* Enable EMAC0 clock */ at91_periph_clk_enable(ATMEL_ID_EMAC0); /* EMAC0 pins setup */ - at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ } if (has_emac1()) { /* Enable EMAC1 clock */ at91_periph_clk_enable(ATMEL_ID_EMAC1); /* EMAC1 pins setup */ - at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ - at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ - at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ - at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ - at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ - at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ - at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ - at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ - at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ - at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ } #ifndef CONFIG_RMII /* Only emac0 support MII */ if (has_emac0()) { - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ } #endif } diff --git a/arch/arm/mach-at91/armv7/sama5d3_devices.c b/arch/arm/mach-at91/armv7/sama5d3_devices.c index 64ac262..6becdd7 100644 --- a/arch/arm/mach-at91/armv7/sama5d3_devices.c +++ b/arch/arm/mach-at91/armv7/sama5d3_devices.c @@ -52,8 +52,8 @@ char *get_cpu_name() void at91_serial0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_USART0); @@ -61,8 +61,8 @@ void at91_serial0_hw_init(void) void at91_serial1_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_USART1); @@ -70,8 +70,8 @@ void at91_serial1_hw_init(void) void at91_serial2_hw_init(void) { - at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ - at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ + at91_pio3_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ + at91_pio3_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_USART2); @@ -79,8 +79,8 @@ void at91_serial2_hw_init(void) void at91_seriald_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ - at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_DBGU); @@ -89,9 +89,9 @@ void at91_seriald_hw_init(void) #if defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ if (cs_mask & (1 << 0)) at91_set_pio_output(AT91_PIO_PORTD, 13, 1); @@ -110,18 +110,18 @@ void at91_spi0_hw_init(unsigned long cs_mask) #ifdef CONFIG_GENERIC_ATMEL_MCI void at91_mci_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ - at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ - at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ #ifdef CONFIG_ATMEL_MCI_8BIT - at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ - at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ - at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ - at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ #endif - at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_MCI0); @@ -131,16 +131,16 @@ void at91_mci_hw_init(void) #ifdef CONFIG_MACB void at91_macb_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_EMAC); @@ -148,23 +148,23 @@ void at91_macb_hw_init(void) void at91_gmac_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ - - at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ - - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ + + at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ + + at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_GMAC); @@ -174,30 +174,30 @@ void at91_gmac_hw_init(void) #ifdef CONFIG_LCD void at91_lcd_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ /* The lower 16-bit of LCD only available on Port A */ - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_LCDC); diff --git a/arch/arm/mach-at91/armv7/u-boot-spl.lds b/arch/arm/mach-at91/armv7/u-boot-spl.lds index c667c55..d2e41a0 100644 --- a/arch/arm/mach-at91/armv7/u-boot-spl.lds +++ b/arch/arm/mach-at91/armv7/u-boot-spl.lds @@ -47,6 +47,8 @@ SECTIONS *(.__end) } >.sram + _image_binary_end = .; + .bss : { . = ALIGN(4); diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h index 3012278..4840a2b 100644 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ b/arch/arm/mach-at91/include/mach/at91_pio.h @@ -32,6 +32,8 @@ #define AT91_ASM_PIOD_ASR \ (ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70) +#define PIO_SCDR_DIV 0x3fff /* Slow Clock Divider Selection for Debouncing Mask */ + #ifndef __ASSEMBLY__ typedef struct at91_port { @@ -63,28 +65,32 @@ typedef struct at91_port { u32 puer; /* 0x64 Pull-up Enable Register */ u32 pusr; /* 0x68 Pad Pull-up Status Register */ u32 reserved4; -#if defined(CPU_HAS_PIO3) - u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */ - u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */ - u32 reserved5[2]; - u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */ - u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */ - u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */ - u32 scdr; /* 0x8C SCLK Divider Debouncing Register */ - u32 ppddr; /* 0x90 Pad Pull-down Disable Register */ - u32 ppder; /* 0x94 Pad Pull-down Enable Register */ - u32 ppdsr; /* 0x98 Pad Pull-down Status Register */ - u32 reserved6; /* */ -#else - u32 asr; /* 0x70 Select A Register */ - u32 bsr; /* 0x74 Select B Register */ - u32 absr; /* 0x78 AB Select Status Register */ - u32 reserved5[9]; /* */ -#endif + union { + struct { + u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */ + u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */ + u32 reserved5[2]; + u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */ + u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */ + u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */ + u32 scdr; /* 0x8C SCLK Divider Debouncing Register */ + u32 ppddr; /* 0x90 Pad Pull-down Disable Register */ + u32 ppder; /* 0x94 Pad Pull-down Enable Register */ + u32 ppdsr; /* 0x98 Pad Pull-down Status Register */ + u32 reserved6; /* */ + } pio3; + + struct { + u32 asr; /* 0x70 Select A Register */ + u32 bsr; /* 0x74 Select B Register */ + u32 absr; /* 0x78 AB Select Status Register */ + u32 reserved5[9]; /* */ + } pio2; + } mux; + u32 ower; /* 0xA0 Output Write Enable Register */ u32 owdr; /* 0xA4 Output Write Disable Register */ u32 owsr; /* OxA8 Output Write Status Register */ -#if defined(CPU_HAS_PIO3) u32 reserved7; /* */ u32 aimer; /* 0xB0 Additional INT Modes Enable Register */ u32 aimdr; /* 0xB4 Additional INT Modes Disable Register */ @@ -103,10 +109,11 @@ typedef struct at91_port { u32 wpsr; /* 0xE8 Write Protect Status Register */ u32 reserved11[5]; /* */ u32 schmitt; /* 0x100 Schmitt Trigger Register */ - u32 reserved12[63]; -#else - u32 reserved6[85]; -#endif + u32 reserved12[4]; /* 0x104 ~ 0x110 */ + u32 driver1; /* 0x114 I/O Driver Register1(AT91SAM9x5's driver1) */ + u32 driver12; /* 0x118 I/O Driver Register12(AT91SAM9x5's driver2 or SAMA5D3x's driver1 ) */ + u32 driver2; /* 0x11C I/O Driver Register2(SAMA5D3x's driver2) */ + u32 reserved13[12]; /* 0x120 ~ 0x14C */ } at91_port_t; typedef union at91_pio { @@ -123,13 +130,6 @@ typedef union at91_pio { #ifdef CONFIG_AT91_GPIO int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup); int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup); -#if defined(CPU_HAS_PIO3) -int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup); -int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup); -int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div); -int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on); -int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin); -#endif int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup); int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on); int at91_set_pio_output(unsigned port, unsigned pin, int value); @@ -138,6 +138,15 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup); int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on); int at91_set_pio_value(unsigned port, unsigned pin, int value); int at91_get_pio_value(unsigned port, unsigned pin); + +int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div); +int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on); +int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin); #endif #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index 8100ebe..e7224e4 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -171,8 +171,6 @@ * Other misc defines */ #define ATMEL_PIO_PORTS 4 -#define CPU_HAS_PIO3 -#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP #define ATMEL_ID_UHP ATMEL_ID_UHPHS diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 5a32bdb..df0f719 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -223,15 +223,13 @@ static inline unsigned pin_to_mask(unsigned pin) at91_set_pio_output((x - PIN_BASE) / 32,(x % 32), y) #define at91_set_gpio_input(x, y) \ at91_set_pio_input((x - PIN_BASE) / 32,(x % 32), y) -#define at91_set_gpio_value(x, y) \ - at91_set_pio_value((x - PIN_BASE) / 32,(x % 32), y) -#define at91_get_gpio_value(x) \ - at91_get_pio_value((x - PIN_BASE) / 32,(x % 32)) -#else -#define at91_set_gpio_value(x, y) at91_set_pio_value(x, y) -#define at91_get_gpio_value(x) at91_get_pio_value(x) #endif +#define at91_set_gpio_value(x, y) \ + at91_set_pio_value((x / 32), (x % 32), y) +#define at91_get_gpio_value(x) \ + at91_get_pio_value((x / 32), (x % 32)) + #define GPIO_PIOA_BASE (0) #define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) #define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index 33f6c97..d558f95 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -188,8 +188,6 @@ * Other misc defines */ #define ATMEL_PIO_PORTS 5 -#define CPU_HAS_PIO3 -#define PIO_SCDR_DIV 0x3fff #define CPU_HAS_PCR /* Timer */ diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index 90085da..78cc2a7 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -174,8 +174,6 @@ * Other misc defines */ #define ATMEL_PIO_PORTS 5 -#define CPU_HAS_PIO3 -#define PIO_SCDR_DIV 0x3fff #define CPU_HAS_PCR #define CPU_HAS_H32MXDIV diff --git a/arch/arm/mach-at91/spl.c b/arch/arm/mach-at91/spl.c index 98f280c..e113336 100644 --- a/arch/arm/mach-at91/spl.c +++ b/arch/arm/mach-at91/spl.c @@ -39,12 +39,16 @@ u32 spl_boot_device(void) #if defined(CONFIG_SYS_USE_MMC) if (dev == ATMEL_SAMA5_BOOT_FROM_MCI) { +#if defined(CONFIG_SPL_OF_CONTROL) + return BOOT_DEVICE_MMC1; +#else if (off == 0) return BOOT_DEVICE_MMC1; if (off == 1) return BOOT_DEVICE_MMC2; printf("ERROR: MMC controller %i not present!\n", dev); hang(); +#endif } #endif @@ -53,6 +57,9 @@ u32 spl_boot_device(void) return BOOT_DEVICE_SPI; #endif + if (dev == ATMEL_SAMA5_BOOT_FROM_SMC) + return BOOT_DEVICE_NAND; + if (dev == ATMEL_SAMA5_BOOT_FROM_SAMBA) return BOOT_DEVICE_USB; diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c index 688289e..b75c2cc 100644 --- a/arch/arm/mach-at91/spl_atmel.c +++ b/arch/arm/mach-at91/spl_atmel.c @@ -77,6 +77,8 @@ void s_init(void) void board_init_f(ulong dummy) { + int ret; + switch_to_main_crystal_osc(); #ifdef CONFIG_SAMA5D2 @@ -99,7 +101,14 @@ void board_init_f(ulong dummy) board_early_init_f(); + mem_init(); + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + preloader_console_init(); - mem_init(); } diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index e56b3db..9bfee04 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -43,6 +43,7 @@ config TARGET_SOCFPGA_CYCLONE5 config TARGET_SOCFPGA_GEN5 bool + select ALTERA_SDRAM choice prompt "Altera SOCFPGA board select" @@ -56,8 +57,8 @@ config TARGET_SOCFPGA_CYCLONE5_SOCDK bool "Altera SOCFPGA SoCDK (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5 -config TARGET_SOCFPGA_DENX_MCVEVK - bool "DENX MCVEVK (Cyclone V)" +config TARGET_SOCFPGA_ARIES_MCVEVK + bool "Aries MCVEVK (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5 config TARGET_SOCFPGA_EBV_SOCRATES @@ -97,7 +98,7 @@ config SYS_BOARD default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "is1" if TARGET_SOCFPGA_IS1 - default "mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK + default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES default "sr1500" if TARGET_SOCFPGA_SR1500 @@ -106,7 +107,7 @@ config SYS_BOARD config SYS_VENDOR default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK - default "denx" if TARGET_SOCFPGA_DENX_MCVEVK + default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES default "samtec" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO @@ -122,7 +123,7 @@ config SYS_CONFIG_NAME default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "socfpga_is1" if TARGET_SOCFPGA_IS1 - default "socfpga_mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK + default "socfpga_mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT default "socfpga_socrates" if TARGET_SOCFPGA_EBV_SOCRATES default "socfpga_sr1500" if TARGET_SOCFPGA_SR1500 diff --git a/arch/arm/mach-socfpga/include/mach/boot0.h b/arch/arm/mach-socfpga/include/mach/boot0.h index aaada31..22d9e7f 100644 --- a/arch/arm/mach-socfpga/include/mach/boot0.h +++ b/arch/arm/mach-socfpga/include/mach/boot0.h @@ -8,21 +8,17 @@ #define __BOOT0_H #ifdef CONFIG_SPL_BUILD -#define ARM_SOC_BOOT0_HOOK \ - .balignl 64,0xf33db33f; \ - \ - .word 0x1337c0d3; /* SoCFPGA preloader validation word */ \ - .word 0xc01df00d; /* Version, flags, length */ \ - .word 0xcafec0d3; /* Checksum, zero-pad */ \ - nop; \ - \ - b reset; /* SoCFPGA jumps here */ \ - nop; \ - nop; \ + .balignl 64,0xf33db33f; + + .word 0x1337c0d3; /* SoCFPGA preloader validation word */ + .word 0xc01df00d; /* Version, flags, length */ + .word 0xcafec0d3; /* Checksum, zero-pad */ nop; -#else -#define ARM_SOC_BOOT0_HOOK -#endif + b reset; /* SoCFPGA jumps here */ + nop; + nop; + nop; +#endif #endif /* __BOOT0_H */ diff --git a/arch/arm/mach-tegra/tegra20/crypto.c b/arch/arm/mach-tegra/tegra20/crypto.c index 1b82fbb..eae7921 100644 --- a/arch/arm/mach-tegra/tegra20/crypto.c +++ b/arch/arm/mach-tegra/tegra20/crypto.c @@ -8,7 +8,7 @@ #include <common.h> #include <linux/errno.h> #include "crypto.h" -#include "aes.h" +#include "uboot_aes.h" static u8 zero_key[16]; diff --git a/arch/mips/mach-ath79/dram.c b/arch/mips/mach-ath79/dram.c index 1c73add..2706812 100644 --- a/arch/mips/mach-ath79/dram.c +++ b/arch/mips/mach-ath79/dram.c @@ -11,7 +11,7 @@ DECLARE_GLOBAL_DATA_PTR; -int initdram(void) +int dram_init(void) { ddr_tap_tuning(); gd->ram_size = get_ram_size((void *)KSEG1, SZ_256M); diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c index c96e046..c3194f0 100644 --- a/arch/mips/mach-pic32/cpu.c +++ b/arch/mips/mach-pic32/cpu.c @@ -110,7 +110,7 @@ static void ddr2_pmd_ungate(void) } /* initialize the DDR2 Controller and DDR2 PHY */ -int initdram(void) +int dram_init(void) { ddr2_pmd_ungate(); ddr2_phy_init(); diff --git a/arch/mips/mach-pic32/include/mach/ddr.h b/arch/mips/mach-pic32/include/mach/ddr.h index 00abfa3..e7da807 100644 --- a/arch/mips/mach-pic32/include/mach/ddr.h +++ b/arch/mips/mach-pic32/include/mach/ddr.h @@ -8,7 +8,7 @@ #ifndef __MICROCHIP_PIC32_DDR_H #define __MICROCHIP_PIC32_DDR_H -/* called by initdram() function */ +/* called by dram_init() function */ void ddr2_phy_init(void); void ddr2_ctrl_init(void); phys_size_t ddr2_calculate_size(void); diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c index c1caa65..6c4ec2c 100644 --- a/arch/nios2/cpu/cpu.c +++ b/arch/nios2/cpu/cpu.c @@ -150,3 +150,9 @@ U_BOOT_DRIVER(altera_nios2) = { .ops = &altera_nios2_ops, .flags = DM_FLAG_PRE_RELOC, }; + +/* This is a dummy function on nios2 */ +int dram_init(void) +{ + return 0; +} diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c index 23d2010..2d7f6c4 100644 --- a/arch/powerpc/cpu/mpc5xxx/spl_boot.c +++ b/arch/powerpc/cpu/mpc5xxx/spl_boot.c @@ -32,7 +32,7 @@ void board_init_f(ulong bootflag) /* * On MPC5200, the initial RAM (and gd) is located in the internal * SRAM. So we can actually call the preloader console init code - * before calling initdram(). This makes serial output (printf) + * before calling dram_init(). This makes serial output (printf) * available very early, even before SDRAM init, which has been * an U-Boot priciple from day 1. */ @@ -62,7 +62,7 @@ void board_init_f(ulong bootflag) * First we need to initialize the SDRAM, so that the real * U-Boot or the OS (Linux) can be loaded */ - initdram(); + dram_init(); /* Clear bss */ memset(__bss_start, '\0', __bss_end - __bss_start); diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 64e0aa7..e3ef4ae 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -401,7 +401,7 @@ void mpc85xx_reginfo(void) #ifndef CONFIG_FSL_CORENET #if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \ !defined(CONFIG_SYS_INIT_L2_ADDR) -int initdram(void) +int dram_init(void) { #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \ defined(CONFIG_ARCH_QEMU_E500) @@ -413,7 +413,7 @@ int initdram(void) return 0; } #else /* CONFIG_SYS_RAMBOOT */ -int initdram(void) +int dram_init(void) { phys_size_t dram_size = 0; diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index 87fd5e6..ffc62a5 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -403,20 +403,20 @@ static unsigned char spd_read(uchar chip, uint addr) } /*-----------------------------------------------------------------------------+ - * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller. + * dram_init. Initializes the 440SP Memory Queue and DDR SDRAM controller. * Note: This routine runs from flash with a stack set up in the chip's * sram space. It is important that the routine does not require .sbss, .bss or * .data sections. It also cannot call routines that require these sections. *-----------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: dram_init * Description: Configures SDRAM memory banks for DDR operation. * Auto Memory Configuration option reads the DDR SDRAM EEPROMs * via the IIC bus and then configures the DDR SDRAM memory * banks appropriately. If Auto Memory Configuration is * not used, it is assumed that no DIMM is plugged *-----------------------------------------------------------------------------*/ -int initdram(void) +int dram_init(void) { unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE}; @@ -2855,13 +2855,13 @@ static void test(void) #else /* CONFIG_SPD_EEPROM */ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: dram_init * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller. * The configuration is performed using static, compile- * time parameters. * Configures the PPC405EX(r) and PPC460EX/GT *---------------------------------------------------------------------------*/ -int initdram(void) +int dram_init(void) { unsigned long val; diff --git a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c index 14d0fd9..c477853 100644 --- a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c @@ -987,20 +987,20 @@ static void program_ddr0_44(unsigned long dimm_ranks[], } /*-----------------------------------------------------------------------------+ - * initdram. Initializes the 440EPx/GPx DDR SDRAM controller. + * dram_init. Initializes the 440EPx/GPx DDR SDRAM controller. * Note: This routine runs from flash with a stack set up in the chip's * sram space. It is important that the routine does not require .sbss, .bss or * .data sections. It also cannot call routines that require these sections. *-----------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: dram_init * Description: Configures SDRAM memory banks for DDR operation. * Auto Memory Configuration option reads the DDR SDRAM EEPROMs * via the IIC bus and then configures the DDR SDRAM memory * banks appropriately. If Auto Memory Configuration is * not used, it is assumed that no DIMM is plugged *-----------------------------------------------------------------------------*/ -int initdram(void) +int dram_init(void) { unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_ranks[MAXDIMMS]; @@ -1014,7 +1014,7 @@ int initdram(void) unsigned long cas_latency = 0; /* to quiet initialization warning */ unsigned long dram_size; - debug("\nEntering initdram()\n"); + debug("\nEntering dram_init()\n"); /*------------------------------------------------------------------ * Stop the DDR-SDRAM controller. diff --git a/arch/powerpc/cpu/ppc4xx/sdram.c b/arch/powerpc/cpu/ppc4xx/sdram.c index a49bd69..c416bce 100644 --- a/arch/powerpc/cpu/ppc4xx/sdram.c +++ b/arch/powerpc/cpu/ppc4xx/sdram.c @@ -150,7 +150,7 @@ static ulong compute_rtr(ulong speed, ulong rows, ulong refresh) /* * Autodetect onboard SDRAM on 405 platforms */ -int initdram(void) +int dram_init(void) { ulong speed; ulong sdtr1; @@ -353,7 +353,7 @@ static void sdram_tr1_set(int ram_address, int* tr1_value) * so this should be extended for other future boards * using this routine! */ -int initdram(void) +int dram_init(void) { int i; int tr1_bank1; diff --git a/arch/powerpc/cpu/ppc4xx/spl_boot.c b/arch/powerpc/cpu/ppc4xx/spl_boot.c index f3aa46c..b30f169 100644 --- a/arch/powerpc/cpu/ppc4xx/spl_boot.c +++ b/arch/powerpc/cpu/ppc4xx/spl_boot.c @@ -26,7 +26,7 @@ void board_init_f(ulong bootflag) * First we need to initialize the SDRAM, so that the real * U-Boot or the OS (Linux) can be loaded */ - initdram(); + dram_init(); /* Clear bss */ memset(__bss_start, '\0', __bss_end - __bss_start); diff --git a/arch/sandbox/include/asm/types.h b/arch/sandbox/include/asm/types.h index 42c09e2..623cdaf 100644 --- a/arch/sandbox/include/asm/types.h +++ b/arch/sandbox/include/asm/types.h @@ -50,7 +50,11 @@ typedef __INT64_TYPE__ s64; typedef __UINT64_TYPE__ u64; #endif -#define BITS_PER_LONG CONFIG_SANDBOX_BITS_PER_LONG +/* + * Number of bits in a C 'long' on this architecture. Set this to 32 when + * building on a 32-bit machine. + */ +#define BITS_PER_LONG 32 typedef unsigned long dma_addr_t; typedef u32 phys_addr_t; diff --git a/arch/xtensa/cpu/cpu.c b/arch/xtensa/cpu/cpu.c index 6787a61..7044480 100644 --- a/arch/xtensa/cpu/cpu.c +++ b/arch/xtensa/cpu/cpu.c @@ -47,3 +47,8 @@ int arch_cpu_init(void) gd->ram_size = CONFIG_SYS_SDRAM_SIZE; return 0; } + +int dram_init(void) +{ + return 0; +} diff --git a/board/Arcturus/ucp1020/spl.c b/board/Arcturus/ucp1020/spl.c index 45e78c6..cd484fc 100644 --- a/board/Arcturus/ucp1020/spl.c +++ b/board/Arcturus/ucp1020/spl.c @@ -110,7 +110,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif - initdram(); + dram_init(); #ifdef CONFIG_SPL_NAND_BOOT puts("Tertiary program loader running in sram..."); #else diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c index 3024a9c..a00a83a 100644 --- a/board/BuS/eb_cpu5282/eb_cpu5282.c +++ b/board/BuS/eb_cpu5282/eb_cpu5282.c @@ -35,7 +35,7 @@ int checkboard (void) return 0; } -int initdram(void) +int dram_init(void) { int size, i; diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index c1120c4..7e16aaf 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -72,11 +72,11 @@ static void sdram_start(int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c index d4b30fd..6f0d448 100644 --- a/board/a4m072/a4m072.c +++ b/board/a4m072/a4m072.c @@ -68,12 +68,12 @@ static void sdram_start (int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; uint svr, pvr; diff --git a/board/advantech/dms-ba16/dms-ba16.c b/board/advantech/dms-ba16/dms-ba16.c index 20750fb..91e96ab 100644 --- a/board/advantech/dms-ba16/dms-ba16.c +++ b/board/advantech/dms-ba16/dms-ba16.c @@ -103,8 +103,9 @@ static void setup_iomux_enet(void) /* Reset AR8033 PHY */ gpio_direction_output(IMX_GPIO_NR(1, 28), 0); - udelay(500); + mdelay(10); gpio_set_value(IMX_GPIO_NR(1, 28), 1); + mdelay(1); } static iomux_v3_cfg_t const usdhc2_pads[] = { @@ -303,7 +304,8 @@ static int mx6_rgmii_rework(struct phy_device *phydev) /* set debug port address: SerDes Test and System Mode Control */ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); /* enable rgmii tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + /* set the reserved bits to avoid board specific voltage peak issue*/ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47); return 0; } @@ -534,11 +536,61 @@ static const struct boot_mode board_boot_modes[] = { }; #endif +void pmic_init(void) +{ + +#define DA9063_ADDR 0x58 +#define BCORE2_CONF 0x9D +#define BCORE1_CONF 0x9E +#define BPRO_CONF 0x9F +#define BIO_CONF 0xA0 +#define BMEM_CONF 0xA1 +#define BPERI_CONF 0xA2 +#define MODE_BIT_H 7 +#define MODE_BIT_L 6 + + uchar val; + i2c_set_bus_num(2); + + i2c_read(DA9063_ADDR, BCORE2_CONF, 1, &val, 1); + val |= (1 << MODE_BIT_H); + val &= ~(1 << MODE_BIT_L); + i2c_write(DA9063_ADDR, BCORE2_CONF , 1, &val, 1); + + i2c_read(DA9063_ADDR, BCORE1_CONF, 1, &val, 1); + val |= (1 << MODE_BIT_H); + val &= ~(1 << MODE_BIT_L); + i2c_write(DA9063_ADDR, BCORE1_CONF , 1, &val, 1); + + i2c_read(DA9063_ADDR, BPRO_CONF, 1, &val, 1); + val |= (1 << MODE_BIT_H); + val &= ~(1 << MODE_BIT_L); + i2c_write(DA9063_ADDR, BPRO_CONF , 1, &val, 1); + + i2c_read(DA9063_ADDR, BIO_CONF, 1, &val, 1); + val |= (1 << MODE_BIT_H); + val &= ~(1 << MODE_BIT_L); + i2c_write(DA9063_ADDR, BIO_CONF , 1, &val, 1); + + i2c_read(DA9063_ADDR, BMEM_CONF, 1, &val, 1); + val |= (1 << MODE_BIT_H); + val &= ~(1 << MODE_BIT_L); + i2c_write(DA9063_ADDR, BMEM_CONF , 1, &val, 1); + + i2c_read(DA9063_ADDR, BPERI_CONF, 1, &val, 1); + val |= (1 << MODE_BIT_H); + val &= ~(1 << MODE_BIT_L); + i2c_write(DA9063_ADDR, BPERI_CONF , 1, &val, 1); + +} + int board_late_init(void) { #ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes); #endif + +#if defined(CONFIG_VIDEO_IPUV3) /* * We need at least 200ms between power on and backlight on * as per specifications from CHI MEI @@ -555,11 +607,15 @@ int board_late_init(void) gpio_direction_output(LVDS_BACKLIGHT_GP, 1); pwm_enable(0); +#endif #ifdef CONFIG_CMD_SATA setup_ba16_sata(); #endif + /* board specific pmic init */ + pmic_init(); + return 0; } diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index cd78a14..36500da 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -43,7 +43,7 @@ static void cram_bcr_write(u32 wr_val) return; } -int initdram(void) +int dram_init(void) { int i; u32 val; diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 453677a..6a50b39 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -438,7 +438,7 @@ int checkboard(void) } -int initdram(void) +int dram_init(void) { gd->ram_size = spd_sdram(); diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c index 725b9ca..c73424d 100644 --- a/board/amcc/bubinga/bubinga.c +++ b/board/amcc/bubinga/bubinga.c @@ -54,10 +54,10 @@ int checkboard(void) } /* ------------------------------------------------------------------------- - initdram() reads EEPROM via I2c. EEPROM contains all of + dram_init() reads EEPROM via I2c. EEPROM contains all of the necessary info for SDRAM controller configuration ------------------------------------------------------------------------- */ -int initdram(void) +int dram_init(void) { gd->ram_size = spd_sdram(); diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index 9bedb5b..ea98717 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -30,10 +30,10 @@ extern void denali_core_search_data_eye(void); /************************************************************************* * - * initdram -- 440EPx's DDR controller is a DENALI Core + * dram_init -- 440EPx's DDR controller is a DENALI Core * ************************************************************************/ -int initdram(void) +int dram_init(void) { #if !defined(CONFIG_SYS_RAMBOOT) ulong speed = get_bus_freq(0); diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index 2a2441e..b21daa0 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -73,10 +73,10 @@ int checkboard(void) } /* - * initdram() reads EEPROM via I2c. EEPROM contains all of + * dram_init() reads EEPROM via I2c. EEPROM contains all of * the necessary info for SDRAM controller configuration */ -int initdram(void) +int dram_init(void) { gd->ram_size = spd_sdram(); diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index fde371d..f46aacf 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -205,7 +205,7 @@ int checkboard(void) } /************************************************************************* - * initdram -- doesn't use serial presence detect. + * dram_init -- doesn't use serial presence detect. * * Assumes: 256 MB, ECC, non-registered * PLB @ 133 MHz @@ -286,7 +286,7 @@ void sdram_tr1_set(int ram_address, int* tr1_value) *tr1_value = (first_good + last_bad) / 2; } -int initdram(void) +int dram_init(void) { register uint reg; int tr1_bank1, tr1_bank2; diff --git a/board/denx/m28evk/Kconfig b/board/aries/m28evk/Kconfig index dd4dc4d..ab5577c 100644 --- a/board/denx/m28evk/Kconfig +++ b/board/aries/m28evk/Kconfig @@ -4,7 +4,7 @@ config SYS_BOARD default "m28evk" config SYS_VENDOR - default "denx" + default "aries" config SYS_SOC default "mxs" diff --git a/board/denx/m28evk/MAINTAINERS b/board/aries/m28evk/MAINTAINERS index b0535a9..f600e7d 100644 --- a/board/denx/m28evk/MAINTAINERS +++ b/board/aries/m28evk/MAINTAINERS @@ -1,6 +1,6 @@ M28EVK BOARD M: Marek Vasut <marek.vasut@gmail.com> S: Maintained -F: board/denx/m28evk/ +F: board/aries/m28evk/ F: include/configs/m28evk.h F: configs/m28evk_defconfig diff --git a/board/denx/m28evk/Makefile b/board/aries/m28evk/Makefile index 5e890b1..5e890b1 100644 --- a/board/denx/m28evk/Makefile +++ b/board/aries/m28evk/Makefile diff --git a/board/denx/m28evk/README b/board/aries/m28evk/README index cb3ae20..9f0d995 100644 --- a/board/denx/m28evk/README +++ b/board/aries/m28evk/README @@ -1,12 +1,12 @@ -DENX M28EVK -=========== +Aries M28EVK +============ Files of the M28/M28EVK port ---------------------------- arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28 arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28 -board/denx/m28evk/ - M28EVK board specific files +board/aries/m28evk/ - M28EVK board specific files include/configs/m28evk.h - M28EVK configuration file Follow the instructions from doc/README.mxs to generate a bootable SD card or to diff --git a/board/denx/m28evk/m28evk.c b/board/aries/m28evk/m28evk.c index 33d38cf..c990ea9 100644 --- a/board/denx/m28evk/m28evk.c +++ b/board/aries/m28evk/m28evk.c @@ -1,5 +1,5 @@ /* - * DENX M28 module + * Aries M28 module * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -93,7 +93,7 @@ int board_mmc_init(bd_t *bis) int fecmxc_mii_postcall(int phy) { -#if defined(CONFIG_DENX_M28_V11) || defined(CONFIG_DENX_M28_V10) +#if defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10) /* KZ8031 PHY on old boards. */ const uint32_t freq = 0x0080; #else @@ -123,7 +123,7 @@ int board_eth_init(bd_t *bis) CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN, CLKCTRL_ENET_TIME_SEL_RMII_CLK); -#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10) +#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10) /* Reset the new PHY */ gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0); udelay(10000); diff --git a/board/denx/m28evk/spl_boot.c b/board/aries/m28evk/spl_boot.c index 5a1010e..e27a74e 100644 --- a/board/denx/m28evk/spl_boot.c +++ b/board/aries/m28evk/spl_boot.c @@ -1,5 +1,5 @@ /* - * DENX M28 Boot setup + * ARIES M28 Boot setup * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -56,7 +56,7 @@ const iomux_cfg_t iomux_setup[] = { MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD, /* UART1 */ -#ifdef CONFIG_DENX_M28_V10 +#ifdef CONFIG_ARIES_M28_V10 MX28_PAD_AUART0_CTS__DUART_RX, MX28_PAD_AUART0_RTS__DUART_TX, #else @@ -132,7 +132,7 @@ const iomux_cfg_t iomux_setup[] = { MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET, MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET, MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET, -#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10) +#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10) MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */ #endif diff --git a/board/denx/m53evk/Kconfig b/board/aries/m53evk/Kconfig index 0696ad7..2d49b40 100644 --- a/board/denx/m53evk/Kconfig +++ b/board/aries/m53evk/Kconfig @@ -4,7 +4,7 @@ config SYS_BOARD default "m53evk" config SYS_VENDOR - default "denx" + default "aries" config SYS_SOC default "mx5" diff --git a/board/denx/m53evk/MAINTAINERS b/board/aries/m53evk/MAINTAINERS index 5d8c764..71137f0 100644 --- a/board/denx/m53evk/MAINTAINERS +++ b/board/aries/m53evk/MAINTAINERS @@ -1,6 +1,6 @@ M53EVK BOARD M: Marek Vasut <marek.vasut@gmail.com> S: Maintained -F: board/denx/m53evk/ +F: board/aries/m53evk/ F: include/configs/m53evk.h F: configs/m53evk_defconfig diff --git a/board/denx/m53evk/Makefile b/board/aries/m53evk/Makefile index 19b8977..daa0fe4 100644 --- a/board/denx/m53evk/Makefile +++ b/board/aries/m53evk/Makefile @@ -1,5 +1,5 @@ # -# DENX M53EVK +# Aries M53EVK # Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> # # SPDX-License-Identifier: GPL-2.0+ diff --git a/board/denx/m53evk/imximage.cfg b/board/aries/m53evk/imximage.cfg index c0e2602..ec855c8 100644 --- a/board/denx/m53evk/imximage.cfg +++ b/board/aries/m53evk/imximage.cfg @@ -1,5 +1,5 @@ /* - * DENX M53 DRAM init values + * Aries M53 DRAM init values * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> * * SPDX-License-Identifier: GPL-2.0+ diff --git a/board/denx/m53evk/m53evk.c b/board/aries/m53evk/m53evk.c index 1e4db24..14c60fc 100644 --- a/board/denx/m53evk/m53evk.c +++ b/board/aries/m53evk/m53evk.c @@ -1,5 +1,5 @@ /* - * DENX M53 module + * Aries M53 module * * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> * @@ -381,7 +381,7 @@ int board_init(void) int checkboard(void) { - puts("Board: DENX M53EVK\n"); + puts("Board: Aries M53EVK\n"); return 0; } diff --git a/board/denx/mcvevk/MAINTAINERS b/board/aries/mcvevk/MAINTAINERS index 6787727..c3a3a2b 100644 --- a/board/denx/mcvevk/MAINTAINERS +++ b/board/aries/mcvevk/MAINTAINERS @@ -1,5 +1,5 @@ -SOCKIT BOARD -M: Marek Vasut <marex@denx.de> +Aries MCVEVK BOARD +M: Marek Vasut <marek.vasut@gmail.com> S: Maintained F: include/configs/socfpga_mcvevk.h F: configs/socfpga_mcvevk_defconfig diff --git a/board/denx/mcvevk/Makefile b/board/aries/mcvevk/Makefile index 86f9b78..86f9b78 100644 --- a/board/denx/mcvevk/Makefile +++ b/board/aries/mcvevk/Makefile diff --git a/board/denx/mcvevk/qts/iocsr_config.h b/board/aries/mcvevk/qts/iocsr_config.h index 3021830..3021830 100644 --- a/board/denx/mcvevk/qts/iocsr_config.h +++ b/board/aries/mcvevk/qts/iocsr_config.h diff --git a/board/denx/mcvevk/qts/pinmux_config.h b/board/aries/mcvevk/qts/pinmux_config.h index ea2f7ab..ea2f7ab 100644 --- a/board/denx/mcvevk/qts/pinmux_config.h +++ b/board/aries/mcvevk/qts/pinmux_config.h diff --git a/board/denx/mcvevk/qts/pll_config.h b/board/aries/mcvevk/qts/pll_config.h index b718b39..b718b39 100644 --- a/board/denx/mcvevk/qts/pll_config.h +++ b/board/aries/mcvevk/qts/pll_config.h diff --git a/board/denx/mcvevk/qts/sdram_config.h b/board/aries/mcvevk/qts/sdram_config.h index ff64f55..ff64f55 100644 --- a/board/denx/mcvevk/qts/sdram_config.h +++ b/board/aries/mcvevk/qts/sdram_config.h diff --git a/board/denx/mcvevk/socfpga.c b/board/aries/mcvevk/socfpga.c index 6be58f0..6be58f0 100644 --- a/board/denx/mcvevk/socfpga.c +++ b/board/aries/mcvevk/socfpga.c diff --git a/board/astro/mcf5373l/mcf5373l.c b/board/astro/mcf5373l/mcf5373l.c index da281e8..d011ae5 100644 --- a/board/astro/mcf5373l/mcf5373l.c +++ b/board/astro/mcf5373l/mcf5373l.c @@ -27,7 +27,7 @@ int checkboard(void) return 0; } -int initdram(void) +int dram_init(void) { #if !defined(CONFIG_MONITOR_IS_IN_RAM) sdram_t *sdp = (sdram_t *)(MMAP_SDRAM); diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c index fc4f50d..58da2d2 100644 --- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c +++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c @@ -71,10 +71,10 @@ static void at91sam9n12ek_nand_hw_init(void) /* Configure ENABLE pin for NandFlash */ at91_set_pio_output(AT91_PIO_PORTD, 4, 1); - at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ - at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */ } #endif @@ -194,7 +194,7 @@ void at91sam9n12ek_ks8851_hw_init(void) &smc->cs[2].mode); /* Configure NCS2 PIN */ - at91_set_b_periph(AT91_PIO_PORTD, 19, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTD, 19, 0); } #endif diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index b0d440d..cc81776 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -77,18 +77,18 @@ static void at91sam9x5ek_nand_hw_init(void) /* Enable NandFlash */ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); - at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ - at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */ - at91_set_a_periph(AT91_PIO_PORTD, 6, 1); - at91_set_a_periph(AT91_PIO_PORTD, 7, 1); - at91_set_a_periph(AT91_PIO_PORTD, 8, 1); - at91_set_a_periph(AT91_PIO_PORTD, 9, 1); - at91_set_a_periph(AT91_PIO_PORTD, 10, 1); - at91_set_a_periph(AT91_PIO_PORTD, 11, 1); - at91_set_a_periph(AT91_PIO_PORTD, 12, 1); - at91_set_a_periph(AT91_PIO_PORTD, 13, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); } #endif @@ -128,49 +128,49 @@ vidinfo_t panel_info = { void lcd_enable(void) { if (has_lcdc()) - at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */ } void lcd_disable(void) { if (has_lcdc()) - at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */ } static void at91sam9x5ek_lcd_hw_init(void) { if (has_lcdc()) { - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */ - at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */ - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ - at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ - at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */ + + at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ at91_periph_clk_enable(ATMEL_ID_LCDC); } diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index ce67478..134c2fe 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -95,31 +95,31 @@ static void sama5d3xek_nor_hw_init(void) &smc->cs[0].mode); /* Address pin (A1 ~ A23) configuration */ - at91_set_a_periph(AT91_PIO_PORTE, 1, 0); - at91_set_a_periph(AT91_PIO_PORTE, 2, 0); - at91_set_a_periph(AT91_PIO_PORTE, 3, 0); - at91_set_a_periph(AT91_PIO_PORTE, 4, 0); - at91_set_a_periph(AT91_PIO_PORTE, 5, 0); - at91_set_a_periph(AT91_PIO_PORTE, 6, 0); - at91_set_a_periph(AT91_PIO_PORTE, 7, 0); - at91_set_a_periph(AT91_PIO_PORTE, 8, 0); - at91_set_a_periph(AT91_PIO_PORTE, 9, 0); - at91_set_a_periph(AT91_PIO_PORTE, 10, 0); - at91_set_a_periph(AT91_PIO_PORTE, 11, 0); - at91_set_a_periph(AT91_PIO_PORTE, 12, 0); - at91_set_a_periph(AT91_PIO_PORTE, 13, 0); - at91_set_a_periph(AT91_PIO_PORTE, 14, 0); - at91_set_a_periph(AT91_PIO_PORTE, 15, 0); - at91_set_a_periph(AT91_PIO_PORTE, 16, 0); - at91_set_a_periph(AT91_PIO_PORTE, 17, 0); - at91_set_a_periph(AT91_PIO_PORTE, 18, 0); - at91_set_a_periph(AT91_PIO_PORTE, 19, 0); - at91_set_a_periph(AT91_PIO_PORTE, 20, 0); - at91_set_a_periph(AT91_PIO_PORTE, 21, 0); - at91_set_a_periph(AT91_PIO_PORTE, 22, 0); - at91_set_a_periph(AT91_PIO_PORTE, 23, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 1, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 2, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 3, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 4, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 5, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 6, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 7, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 8, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 9, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 10, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 11, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 12, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 13, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 14, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 15, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 16, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 17, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 18, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 19, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 20, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 21, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 22, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 23, 0); /* CS0 pin configuration */ - at91_set_a_periph(AT91_PIO_PORTE, 26, 0); + at91_pio3_set_a_periph(AT91_PIO_PORTE, 26, 0); } #endif @@ -170,14 +170,14 @@ static void sama5d3xek_lcd_hw_init(void) gd->fb_base = CONFIG_SAMA5D3_LCD_BASE; /* The higher 8 bit of LCD is board related */ - at91_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */ - at91_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */ - at91_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */ - at91_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */ - at91_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */ - at91_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */ - at91_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */ - at91_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */ + at91_pio3_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */ + at91_pio3_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */ + at91_pio3_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */ + at91_pio3_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */ + at91_pio3_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */ + at91_pio3_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */ /* Configure lower 16 bit of LCD and enable clock */ at91_lcd_hw_init(); diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index 23ec274..94ecab2 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -10,52 +10,18 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/atmel_mpddrc.h> -#include <asm/arch/atmel_usba_udc.h> #include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> +#include <debug_uart.h> #include <lcd.h> -#include <mmc.h> -#include <net.h> -#include <netdev.h> #include <nand.h> -#include <spi.h> #include <version.h> DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_ATMEL_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); -} - -static void sama5d4_xplained_spi0_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ - - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_SPI0); -} -#endif /* CONFIG_ATMEL_SPI */ - #ifdef CONFIG_NAND_ATMEL static void sama5d4_xplained_nand_hw_init(void) { @@ -82,20 +48,20 @@ static void sama5d4_xplained_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */ - at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */ - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */ - at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */ } #endif @@ -134,39 +100,39 @@ unsigned int has_lcdc(void) static void sama5d4_xplained_lcd_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_LCDC); @@ -200,109 +166,46 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD */ -#ifdef CONFIG_GENERIC_ATMEL_MCI -void sama5d4_xplained_mci1_hw_init(void) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +static void sama5d4_xplained_serial3_hw_init(void) { - at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ - at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ - at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ - at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ - at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ - at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ - - /* - * As the mci io internal pull down is too strong, so if the io needs - * external pull up, the pull up resistor will be very small, if so - * the power consumption will increase, so disable the interanl pull - * down to save the power. - */ - at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_MCI1); -} - -int board_mmc_init(bd_t *bis) -{ - /* Enable the power supply */ - at91_set_pio_output(AT91_PIO_PORTE, 4, 0); - - return atmel_mci_init((void *)ATMEL_BASE_MCI1); + at91_periph_clk_enable(ATMEL_ID_USART3); } -#endif /* CONFIG_GENERIC_ATMEL_MCI */ -#ifdef CONFIG_MACB -void sama5d4_xplained_macb0_hw_init(void) +void board_debug_uart_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_GMAC0); + sama5d4_xplained_serial3_hw_init(); } #endif -static void sama5d4_xplained_serial3_hw_init(void) -{ - at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ - at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_USART3); -} - +#ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - at91_periph_clk_enable(ATMEL_ID_PIOE); - - sama5d4_xplained_serial3_hw_init(); - +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif return 0; } +#endif int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -#ifdef CONFIG_ATMEL_SPI - sama5d4_xplained_spi0_hw_init(); -#endif #ifdef CONFIG_NAND_ATMEL sama5d4_xplained_nand_hw_init(); #endif -#ifdef CONFIG_GENERIC_ATMEL_MCI - sama5d4_xplained_mci1_hw_init(); -#endif -#ifdef CONFIG_MACB - sama5d4_xplained_macb0_hw_init(); -#endif #ifdef CONFIG_LCD sama5d4_xplained_lcd_hw_init(); #endif #ifdef CONFIG_CMD_USB sama5d4_xplained_usb_hw_init(); #endif -#ifdef CONFIG_USB_GADGET_ATMEL_USBA - at91_udp_hw_init(); -#endif return 0; } @@ -314,34 +217,12 @@ int dram_init(void) return 0; } -int board_eth_init(bd_t *bis) -{ - int rc = 0; - -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00); -#endif - -#ifdef CONFIG_USB_GADGET_ATMEL_USBA - usba_udc_probe(&pdata); -#ifdef CONFIG_USB_ETH_RNDIS - usb_eth_initialize(bis); -#endif -#endif - - return rc; -} - /* SPL */ #ifdef CONFIG_SPL_BUILD void spl_board_init(void) { -#ifdef CONFIG_SYS_USE_MMC - sama5d4_xplained_mci1_hw_init(); -#elif CONFIG_SYS_USE_NANDFLASH +#if CONFIG_SYS_USE_NANDFLASH sama5d4_xplained_nand_hw_init(); -#elif CONFIG_SYS_USE_SERIALFLASH - sama5d4_xplained_spi0_hw_init(); #endif } diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index 72bad23..ffb4a50 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -10,52 +10,18 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/atmel_mpddrc.h> -#include <asm/arch/atmel_usba_udc.h> #include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> +#include <debug_uart.h> #include <lcd.h> -#include <mmc.h> -#include <net.h> -#include <netdev.h> #include <nand.h> -#include <spi.h> #include <version.h> DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_ATMEL_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 0); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); -} - -static void sama5d4ek_spi0_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ - - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_SPI0); -} -#endif /* CONFIG_ATMEL_SPI */ - #ifdef CONFIG_NAND_ATMEL static void sama5d4ek_nand_hw_init(void) { @@ -82,20 +48,20 @@ static void sama5d4ek_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */ - at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */ - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */ - at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */ } #endif @@ -135,33 +101,33 @@ unsigned int has_lcdc(void) static void sama5d4ek_lcd_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_LCDC); @@ -196,109 +162,46 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD */ -#ifdef CONFIG_GENERIC_ATMEL_MCI -void sama5d4ek_mci1_hw_init(void) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +static void sama5d4ek_serial3_hw_init(void) { - at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ - at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ - at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ - at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ - at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ - at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ - - /* - * As the mci io internal pull down is too strong, so if the io needs - * external pull up, the pull up resistor will be very small, if so - * the power consumption will increase, so disable the interanl pull - * down to save the power. - */ - at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); + at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_MCI1); -} - -int board_mmc_init(bd_t *bis) -{ - /* Enable power for MCI1 interface */ - at91_set_pio_output(AT91_PIO_PORTE, 15, 0); - - return atmel_mci_init((void *)ATMEL_BASE_MCI1); + at91_periph_clk_enable(ATMEL_ID_USART3); } -#endif /* CONFIG_GENERIC_ATMEL_MCI */ -#ifdef CONFIG_MACB -void sama5d4ek_macb0_hw_init(void) +void board_debug_uart_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_GMAC0); + sama5d4ek_serial3_hw_init(); } #endif -static void sama5d4ek_serial3_hw_init(void) -{ - at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ - at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_USART3); -} - +#ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - at91_periph_clk_enable(ATMEL_ID_PIOE); - - sama5d4ek_serial3_hw_init(); - +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif return 0; } +#endif int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -#ifdef CONFIG_ATMEL_SPI - sama5d4ek_spi0_hw_init(); -#endif #ifdef CONFIG_NAND_ATMEL sama5d4ek_nand_hw_init(); #endif -#ifdef CONFIG_GENERIC_ATMEL_MCI - sama5d4ek_mci1_hw_init(); -#endif -#ifdef CONFIG_MACB - sama5d4ek_macb0_hw_init(); -#endif #ifdef CONFIG_LCD sama5d4ek_lcd_hw_init(); #endif #ifdef CONFIG_CMD_USB sama5d4ek_usb_hw_init(); #endif -#ifdef CONFIG_USB_GADGET_ATMEL_USBA - at91_udp_hw_init(); -#endif return 0; } @@ -310,34 +213,12 @@ int dram_init(void) return 0; } -int board_eth_init(bd_t *bis) -{ - int rc = 0; - -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00); -#endif - -#ifdef CONFIG_USB_GADGET_ATMEL_USBA - usba_udc_probe(&pdata); -#ifdef CONFIG_USB_ETH_RNDIS - usb_eth_initialize(bis); -#endif -#endif - - return rc; -} - /* SPL */ #ifdef CONFIG_SPL_BUILD void spl_board_init(void) { -#ifdef CONFIG_SYS_USE_MMC - sama5d4ek_mci1_hw_init(); -#elif CONFIG_SYS_USE_NANDFLASH +#if CONFIG_SYS_USE_NANDFLASH sama5d4ek_nand_hw_init(); -#elif CONFIG_SYS_USE_SERIALFLASH - sama5d4ek_spi0_hw_init(); #endif } diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c index 41194ec..54de0e2 100644 --- a/board/canmb/canmb.c +++ b/board/canmb/canmb.c @@ -62,12 +62,12 @@ static void sdram_start (int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index be0d65c..7b86235 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -97,7 +97,7 @@ static mem_conf_t* get_mem_config(int board_type) /* * Initalize SDRAM - configure SDRAM controller, detect memory size. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; #ifndef CONFIG_SYS_RAMBOOT diff --git a/board/cobra5272/cobra5272.c b/board/cobra5272/cobra5272.c index 4836676..0ceaa1f 100644 --- a/board/cobra5272/cobra5272.c +++ b/board/cobra5272/cobra5272.c @@ -17,7 +17,7 @@ int checkboard (void) return 0; }; -int initdram(void) +int dram_init(void) { volatile sdramctrl_t *sdp = (sdramctrl_t *) (MMAP_SDRAM); diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index f0be2cb..e3441ca 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; -int initdram(void) +int dram_init(void) { gd->ram_size = fixed_sdram(NULL, NULL, 0); diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c index ea7cb74..81285d7 100644 --- a/board/dbau1x00/dbau1x00.c +++ b/board/dbau1x00/dbau1x00.c @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR; -int initdram(void) +int dram_init(void) { /* Sdram is setup by assembler code */ /* If memory could be changed, we should return the true value here */ diff --git a/board/denx/ma5d4evk/ma5d4evk.c b/board/denx/ma5d4evk/ma5d4evk.c index ec0fa28..8146371 100644 --- a/board/denx/ma5d4evk/ma5d4evk.c +++ b/board/denx/ma5d4evk/ma5d4evk.c @@ -44,9 +44,9 @@ void spi_cs_deactivate(struct spi_slave *slave) static void ma5d4evk_spi0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ @@ -90,39 +90,39 @@ unsigned int has_lcdc(void) static void ma5d4evk_lcd_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */ - at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */ - - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ + at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_LCDC); @@ -134,16 +134,16 @@ static void ma5d4evk_lcd_hw_init(void) /* On-SoM eMMC */ void ma5d4evk_mci0_hw_init(void) { - at91_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */ - at91_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */ - at91_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */ - at91_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */ - at91_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */ - at91_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */ - at91_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */ - at91_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */ - at91_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */ - at91_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */ /* * As the mci io internal pull down is too strong, so if the io needs @@ -151,16 +151,16 @@ void ma5d4evk_mci0_hw_init(void) * the power consumption will increase, so disable the internal pull * down to save the power. */ - at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0); /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_MCI0); @@ -169,12 +169,12 @@ void ma5d4evk_mci0_hw_init(void) /* On-board MicroSD slot */ void ma5d4evk_mci1_hw_init(void) { - at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ - at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ - at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ - at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ - at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ - at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ + at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ /* * As the mci io internal pull down is too strong, so if the io needs @@ -182,16 +182,16 @@ void ma5d4evk_mci1_hw_init(void) * the power consumption will increase, so disable the internal pull * down to save the power. */ - at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); /* Deal with WP pin on the microSD slot. */ at91_set_pio_output(AT91_PIO_PORTE, 16, 0); - at91_set_pio_pulldown(AT91_PIO_PORTE, 16, 1); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1); /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_MCI1); @@ -203,7 +203,7 @@ int board_mmc_init(bd_t *bis) /* De-assert reset on On-SoM eMMC */ at91_set_pio_output(AT91_PIO_PORTE, 15, 1); - at91_set_pio_pulldown(AT91_PIO_PORTE, 15, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0); ret = atmel_mci_init((void *)ATMEL_BASE_MCI0); if (ret) /* eMMC init failed, skip it. */ @@ -223,16 +223,16 @@ int board_mmc_init(bd_t *bis) #ifdef CONFIG_MACB void ma5d4evk_macb0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_GMAC0); @@ -242,17 +242,17 @@ void ma5d4evk_macb0_hw_init(void) static void ma5d4evk_serial_hw_init(void) { /* USART0 */ - at91_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */ - at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */ - at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */ at91_periph_clk_enable(ATMEL_ID_USART0); /* USART1 */ - at91_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */ - at91_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */ - at91_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */ at91_periph_clk_enable(ATMEL_ID_USART1); } @@ -273,7 +273,7 @@ int board_early_init_f(void) at91_set_pio_output(AT91_PIO_PORTB, 21, 0); udelay(100); at91_set_pio_output(AT91_PIO_PORTB, 21, 1); - at91_set_pio_pulldown(AT91_PIO_PORTB, 21, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0); ma5d4evk_serial_hw_init(); diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index 80963fe..66dc407 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -62,7 +62,7 @@ int board_early_init_f(void) return 0; } -int initdram(void) +int dram_init(void) { gd->ram_size = get_ram_size(0, fixed_sdram(NULL, NULL, 0)); diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c index e962d4c..c379e77 100644 --- a/board/esd/pmc440/sdram.c +++ b/board/esd/pmc440/sdram.c @@ -42,7 +42,7 @@ struct sdram_conf_s sdram_conf[] = { }; /* - * initdram -- 440EPx's DDR controller is a DENALI Core + * dram_init -- 440EPx's DDR controller is a DENALI Core */ int initdram_by_rb(int rows, int banks) { @@ -107,7 +107,7 @@ int initdram_by_rb(int rows, int banks) return 0; } -int initdram(void) +int dram_init(void) { phys_size_t size; int n; diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index 0e7f8b1..36a5519 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; void ddr_enable_ecc(unsigned int dram_size); -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index 0853231..5cc2f73 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -176,7 +176,7 @@ found: popts->cpo_sample = 0x3e; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/b4860qds/spl.c b/board/freescale/b4860qds/spl.c index a27ad7f..60d7f0d 100644 --- a/board/freescale/b4860qds/spl.c +++ b/board/freescale/b4860qds/spl.c @@ -108,7 +108,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) puts("\n\n"); - initdram(); + dram_init(); #ifdef CONFIG_SPL_NAND_BOOT nand_boot(); diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c index 86d55bf..94093f1 100644 --- a/board/freescale/c29xpcie/spl.c +++ b/board/freescale/c29xpcie/spl.c @@ -67,7 +67,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_NAND_BOOT puts("TPL\n"); diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index ad93abf..496d841 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -260,7 +260,7 @@ found: popts->ddr_cdr1 = DDR_CDR1_DHC_EN; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c index 3bf2e49..d16a69f 100644 --- a/board/freescale/ls1021aqds/ddr.c +++ b/board/freescale/ls1021aqds/ddr.c @@ -164,7 +164,7 @@ void board_mem_sleep_setup(void) } #endif -int initdram(void) +int fsl_initdram(void) { phys_size_t dram_size; diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 909fc56..d81d8ab 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -162,7 +162,7 @@ int dram_init(void) * before accessing DDR SPD. */ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); - return initdram(); + return fsl_initdram(); } #ifdef CONFIG_FSL_ESDHC diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c index db350e2..2643f5b 100644 --- a/board/freescale/ls1043aqds/ddr.c +++ b/board/freescale/ls1043aqds/ddr.c @@ -108,7 +108,7 @@ found: #endif } -int initdram(void) +int fsl_initdram(void) { phys_size_t dram_size; diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 538bba5..2df63e4 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -7,6 +7,7 @@ #include <common.h> #include <i2c.h> #include <fdt_support.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> @@ -153,7 +154,7 @@ int dram_init(void) * before accessing DDR SPD. */ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); - initdram(); + fsl_initdram(); #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index 2f133db..36d27ec 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -170,7 +170,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, } #endif -int initdram(void) +int fsl_initdram(void) { phys_size_t dram_size; diff --git a/board/freescale/ls1046aqds/ddr.c b/board/freescale/ls1046aqds/ddr.c index 481ed44..d37af34 100644 --- a/board/freescale/ls1046aqds/ddr.c +++ b/board/freescale/ls1046aqds/ddr.c @@ -92,7 +92,7 @@ found: popts->cpo_sample = 0x70; } -int initdram(void) +int fsl_initdram(void) { phys_size_t dram_size; diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 6238852..69fc15b 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -7,6 +7,7 @@ #include <common.h> #include <i2c.h> #include <fdt_support.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> @@ -149,7 +150,7 @@ int dram_init(void) * before accessing DDR SPD. */ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); - initdram(); + fsl_initdram(); #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); diff --git a/board/freescale/ls1046ardb/ddr.c b/board/freescale/ls1046ardb/ddr.c index d1290e2..a16f7bc 100644 --- a/board/freescale/ls1046ardb/ddr.c +++ b/board/freescale/ls1046ardb/ddr.c @@ -96,7 +96,7 @@ found: popts->cpo_sample = 0x70; } -int initdram(void) +int fsl_initdram(void) { phys_size_t dram_size; diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c index d340c41..9d176d3 100644 --- a/board/freescale/ls2080a/ddr.c +++ b/board/freescale/ls2080a/ddr.c @@ -158,7 +158,8 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, return 0; } #endif -int initdram(void) + +int fsl_initdram(void) { puts("Initializing DDR...."); diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c index 1e9145d..22a2676 100644 --- a/board/freescale/ls2080aqds/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -155,7 +155,7 @@ found: } } -int initdram(void) +int fsl_initdram(void) { #if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) gd->ram_size = fsl_ddr_sdram_size(); diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c index 029ea61..7002dfb 100644 --- a/board/freescale/ls2080ardb/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -158,7 +158,7 @@ found: } } -int initdram(void) +int fsl_initdram(void) { #if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) gd->ram_size = fsl_ddr_sdram_size(); diff --git a/board/freescale/m5208evbe/m5208evbe.c b/board/freescale/m5208evbe/m5208evbe.c index edf486a..4b841c6 100644 --- a/board/freescale/m5208evbe/m5208evbe.c +++ b/board/freescale/m5208evbe/m5208evbe.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c index 28736435..e4dfb6f 100644 --- a/board/freescale/m52277evb/m52277evb.c +++ b/board/freescale/m52277evb/m52277evb.c @@ -21,7 +21,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { u32 dramsize; diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c index 1d82e93..93403f6 100644 --- a/board/freescale/m5235evb/m5235evb.c +++ b/board/freescale/m5235evb/m5235evb.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); gpio_t *gpio = (gpio_t *)(MMAP_GPIO); diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c index d3c2acd..7c9b599 100644 --- a/board/freescale/m5249evb/m5249evb.c +++ b/board/freescale/m5249evb/m5249evb.c @@ -31,7 +31,7 @@ int checkboard (void) { }; -int initdram(void) +int dram_init(void) { unsigned long junk = 0xa5a59696; diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c index 1c100e6..c2cc2d7 100644 --- a/board/freescale/m5253demo/m5253demo.c +++ b/board/freescale/m5253demo/m5253demo.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { u32 dramsize = 0; diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index eae499f..c1ed431 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -21,7 +21,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { /* * Check to see if the SDRAM has already been initialized diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c index bbe06ba..efff465 100644 --- a/board/freescale/m5272c3/m5272c3.c +++ b/board/freescale/m5272c3/m5272c3.c @@ -19,7 +19,7 @@ int checkboard (void) { return 0; }; -int initdram(void) +int dram_init(void) { sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM); diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c index 48ad4a8..5a9831d 100644 --- a/board/freescale/m5275evb/m5275evb.c +++ b/board/freescale/m5275evb/m5275evb.c @@ -25,7 +25,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM); gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); diff --git a/board/freescale/m5282evb/m5282evb.c b/board/freescale/m5282evb/m5282evb.c index 7f3c04c..eb618b5 100644 --- a/board/freescale/m5282evb/m5282evb.c +++ b/board/freescale/m5282evb/m5282evb.c @@ -16,7 +16,7 @@ int checkboard (void) return 0; } -int initdram(void) +int dram_init(void) { u32 dramsize, i, dramclk; diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c index b0c27b4..71cca35 100644 --- a/board/freescale/m53017evb/m53017evb.c +++ b/board/freescale/m53017evb/m53017evb.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index 5609a7b..4e0b4e4 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c index 48a262c..f2ed298 100644 --- a/board/freescale/m5373evb/m5373evb.c +++ b/board/freescale/m5373evb/m5373evb.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; diff --git a/board/freescale/m54418twr/m54418twr.c b/board/freescale/m54418twr/m54418twr.c index 3f1100c..4335394 100644 --- a/board/freescale/m54418twr/m54418twr.c +++ b/board/freescale/m54418twr/m54418twr.c @@ -25,7 +25,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { u32 dramsize; diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c index 653a113..050624b 100644 --- a/board/freescale/m54451evb/m54451evb.c +++ b/board/freescale/m54451evb/m54451evb.c @@ -26,7 +26,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { u32 dramsize; #ifdef CONFIG_CF_SBF diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index b9850c1..d6b0650 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -22,7 +22,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { u32 dramsize; #ifdef CONFIG_CF_SBF diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c index fc67452..d28f43d 100644 --- a/board/freescale/m547xevb/m547xevb.c +++ b/board/freescale/m547xevb/m547xevb.c @@ -23,7 +23,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { siu_t *siu = (siu_t *) (MMAP_SIU); sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c index c268ec6..56060b6 100644 --- a/board/freescale/m548xevb/m548xevb.c +++ b/board/freescale/m548xevb/m548xevb.c @@ -23,7 +23,7 @@ int checkboard(void) return 0; }; -int initdram(void) +int dram_init(void) { siu_t *siu = (siu_t *) (MMAP_SIU); sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index a0e5d91..f87579f 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -95,7 +95,7 @@ int is_micron(void){ return(ismicron); } -int initdram(void) +int dram_init(void) { u32 msize = 0; /* diff --git a/board/freescale/mpc8308rdb/sdram.c b/board/freescale/mpc8308rdb/sdram.c index aac56c3..81e155a 100644 --- a/board/freescale/mpc8308rdb/sdram.c +++ b/board/freescale/mpc8308rdb/sdram.c @@ -65,7 +65,7 @@ static long fixed_sdram(void) return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); } -int initdram(void) +int dram_init(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize; diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index e3a5941..8974378 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -134,7 +134,7 @@ void board_init_f(ulong bootflag) CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); puts("NAND boot... "); timer_init(); - initdram(); + dram_init(); relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, CONFIG_SYS_NAND_U_BOOT_RELOC); } diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 4e5dfe6..a4128cb 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -97,7 +97,7 @@ static long fixed_sdram(void) return msize; } -int initdram(void) +int dram_init(void) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; volatile fsl_lbc_t *lbc = &im->im_lbc; diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c index 7779b6d..22f1565 100644 --- a/board/freescale/mpc8315erdb/mpc8315erdb.c +++ b/board/freescale/mpc8315erdb/mpc8315erdb.c @@ -222,7 +222,7 @@ void board_init_f(ulong bootflag) CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); puts("NAND boot... "); timer_init(); - initdram(); + dram_init(); relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, CONFIG_SYS_NAND_U_BOOT_RELOC); } diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c index 947ffab..b69c86b 100644 --- a/board/freescale/mpc8315erdb/sdram.c +++ b/board/freescale/mpc8315erdb/sdram.c @@ -92,7 +92,7 @@ static long fixed_sdram(void) } #endif /* CONFIG_SYS_RAMBOOT */ -int initdram(void) +int dram_init(void) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; u32 msize; diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index e7d8b99..f30a151 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -70,7 +70,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { int fixed_sdram(void); -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c index 907ad09..b49e03e 100644 --- a/board/freescale/mpc832xemds/mpc832xemds.c +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -90,7 +90,7 @@ int board_early_init_r(void) int fixed_sdram(void); -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 595bce1..5f502e2 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -48,7 +48,7 @@ int board_early_init_f (void) #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; phys_size_t msize = 0; diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 27f0ccd..895e9ff 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -118,7 +118,7 @@ volatile static struct pci_controller hose[] = { }; #endif /* CONFIG_PCI */ -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index a3af246..2330492 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -218,7 +218,7 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif int fixed_sdram(void); -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 2f5431e..319f047 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -62,7 +62,7 @@ void ddr_enable_ecc(unsigned int dram_size); #endif int fixed_sdram(void); -int initdram(void) +int dram_init(void) { immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 0422208..d97562c 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -118,7 +118,7 @@ int checkboard(void) } -int initdram(void) +int dram_init(void) { phys_size_t dram_size = 0; diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 07cb08b..2604a51 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -39,7 +39,7 @@ int checkboard(void) return 0; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size = 0; diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README index 5814b9d..bc0c0d0 100644 --- a/board/freescale/mx6sabresd/README +++ b/board/freescale/mx6sabresd/README @@ -1,17 +1,19 @@ How to use and build U-Boot on mx6sabresd: ---------------------------------- -Currently there are three methods for booting mx6sabresd boards: +Currently there are four methods for booting mx6sabresd boards: -1. Booting via Normal U-Boot (u-boot.imx) +1. Booting from SD card via normal U-Boot (u-boot.imx) -2. Booting via SPL (SPL and u-boot.img) +2. Booting from eMMC via normal U-Boot -3. Booting via Falcon mode (SPL launches the kernel directly) +3. Booting via SPL (SPL and u-boot.img) +4. Booting via Falcon mode (SPL launches the kernel directly) -1. Booting via Normal U-Boot ----------------------------- + +1. Booting from SD card via normal U-Boot +----------------------------------------- $ make mx6qsabresd_defconfig (If you want to build for mx6qsabresd) @@ -28,7 +30,44 @@ This will generate the image called u-boot.imx. $ sudo dd if=u-boot.imx of=/dev/sdb bs=1K seek=1 && sync -2. Booting via SPL +2. Booting from eMMC via normal U-Boot +-------------------------------------- + +$ make mx6qsabresd_defconfig (If you want to build for mx6qsabresd) + +or + +$ make mx6dlsabresd_defconfig (If you want to build for mx6dlsabresd) + +$ make + +This will generate the image called u-boot.imx. + +- Flash the u-boot.imx binary into the eMMC: + +Set SW6 to download mode: 00001100 + +Plug a usb cable to USB-OTG and load the u-boot image using the imx_usb_loader +tool (https://github.com/boundarydevices/imx_usb_loader): + +$ sudo ./imx_usb u-boot.imx + +In U-boot change the eMMC partition config: + +=> mmc partconf 2 1 0 0 + +Mount the eMMC in the host PC: + +=> ums 0 mmc 2 + +Flash the u-boot.imx binary + +$ sudo dd if=u-boot.imx of=/dev/sdX bs=1K seek=1 && sync + +Set SW6 to eMMC 8-bit boot: 11010110 + + +3. Booting via SPL ------------------ Other method for building U-Boot on mx6qsabresd and mx6qpsabresd is @@ -48,7 +87,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync $ sudo dd if=u-boot.img of=/dev/sdbbs=1K seek=69 && sync -3. Booting via Falcon mode +4. Booting via Falcon mode -------------------------- $ make mx6sabresd_spl_defconfig diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index 96c0e8c..d495433 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -47,11 +47,6 @@ DECLARE_GLOBAL_DATA_PTR; #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - #define OTGID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\ PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \ @@ -155,157 +150,55 @@ static void setup_iomux_fec(void) imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); /* Power up LAN8720 PHY */ + gpio_request(ETH_PHY_POWER, "eth_pwr"); gpio_direction_output(ETH_PHY_POWER , 1); udelay(15000); } -#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7) -#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0) -#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22) - -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC1_BASE_ADDR}, - {USDHC2_BASE_ADDR, 0, 4}, - {USDHC3_BASE_ADDR, 0, 4}, -}; - int board_mmc_get_env_dev(int devno) { return devno; } -int board_mmc_getcd(struct mmc *mmc) +#ifdef CONFIG_DM_PMIC_PFUZE100 +int power_init_board(void) { - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; + struct udevice *dev; + int ret; + u32 dev_id, rev_id, i; + u32 switch_num = 6; + u32 offset = PFUZE100_SW1CMODE; - switch (cfg->esdhc_base) { - case USDHC1_BASE_ADDR: - ret = !gpio_get_value(USDHC1_CD_GPIO); - break; - case USDHC2_BASE_ADDR: - ret = !gpio_get_value(USDHC2_CD_GPIO); - break; - case USDHC3_BASE_ADDR: - ret = !gpio_get_value(USDHC3_CD_GPIO); - break; - } - - return ret; -} + ret = pmic_get("pfuze100", &dev); + if (ret == -ENODEV) + return 0; -int board_mmc_init(bd_t *bis) -{ -#ifndef CONFIG_SPL_BUILD - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 USDHC1 - * mmc1 USDHC2 - * mmc2 USDHC3 - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); - gpio_direction_input(USDHC1_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - gpio_direction_input(USDHC3_CD_GPIO); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) than supported by the board\n", i + 1); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) { - printf("Warning: failed to initialize " - "mmc dev %d\n", i); - return ret; - } - } + if (ret != 0) + return ret; - return 0; -#else - struct src *src_regs = (struct src *)SRC_BASE_ADDR; - u32 val; - u32 port; + dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID); + rev_id = pmic_reg_read(dev, PFUZE100_REVID); + printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id); - val = readl(&src_regs->sbmr1); + /* set SW1AB staby volatage 0.975V */ + pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b); - /* Boot from USDHC */ - port = (val >> 11) & 0x3; - switch (port) { - case 0: - imx_iomux_v3_setup_multiple_pads(usdhc1_pads, - ARRAY_SIZE(usdhc1_pads)); - gpio_direction_input(USDHC1_CD_GPIO); - usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - break; - case 1: - imx_iomux_v3_setup_multiple_pads(usdhc2_pads, - ARRAY_SIZE(usdhc2_pads)); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; - usdhc_cfg[0].max_bus_width = 4; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - break; - case 2: - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, - ARRAY_SIZE(usdhc3_pads)); - gpio_direction_input(USDHC3_CD_GPIO); - usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; - usdhc_cfg[0].max_bus_width = 4; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - } + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif -} + /* set SW1C staby volatage 0.975V */ + pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x1b); -#ifdef CONFIG_SYS_I2C_MXC -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C1 for PMIC */ -struct i2c_pads_info i2c_pad_info1 = { - .sda = { - .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC, - .gp = IMX_GPIO_NR(3, 13), - }, - .scl = { - .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC, - .gp = IMX_GPIO_NR(3, 12), - }, -}; + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40); -int power_init_board(void) -{ - struct pmic *p; + /* Init mode to APS_PFM */ + pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM); - p = pfuze_common_init(I2C_PMIC); - if (!p) - return -ENODEV; + for (i = 0; i < switch_num - 1; i++) + pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM); - return pfuze_mode_init(p, APS_PFM); + return 0; } #endif @@ -374,9 +267,7 @@ int board_ehci_hcd_init(int port) int board_early_init_f(void) { setup_iomux_uart(); -#ifdef CONFIG_MXC_SPI - setup_spi(); -#endif + return 0; } @@ -385,8 +276,9 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -#ifdef CONFIG_SYS_I2C_MXC - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); +#ifdef CONFIG_MXC_SPI + gpio_request(IMX_GPIO_NR(4, 11), "spi_cs"); + setup_spi(); #endif #ifdef CONFIG_FEC_MXC @@ -411,6 +303,76 @@ int checkboard(void) #include <spl.h> #include <libfdt.h> +#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7) +#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0) +#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22) + +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR}, + {USDHC2_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR, 0, 4}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + u32 val; + u32 port; + + val = readl(&src_regs->sbmr1); + + /* Boot from USDHC */ + port = (val >> 11) & 0x3; + switch (port) { + case 0: + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + gpio_direction_input(USDHC1_CD_GPIO); + usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + case 1: + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, + ARRAY_SIZE(usdhc2_pads)); + gpio_direction_input(USDHC2_CD_GPIO); + usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; + usdhc_cfg[0].max_bus_width = 4; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + break; + case 2: + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, + ARRAY_SIZE(usdhc3_pads)); + gpio_direction_input(USDHC3_CD_GPIO); + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].max_bus_width = 4; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + } + + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + const struct mx6sl_iomux_ddr_regs mx6_ddr_ioregs = { .dram_sdqs0 = 0x00003030, .dram_sdqs1 = 0x00003030, diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 0565367..2cebc2c 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -94,7 +94,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_NAND_BOOT puts("\nTertiary program loader running in sram..."); #else diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c index 1f490dc..a117dc3 100644 --- a/board/freescale/p1022ds/spl.c +++ b/board/freescale/p1022ds/spl.c @@ -111,7 +111,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif - initdram(); + dram_init(); #ifdef CONFIG_SPL_NAND_BOOT puts("Tertiary program loader running in sram..."); #else diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index 6763739..1cf3497 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -108,7 +108,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif - initdram(); + dram_init(); #ifdef CONFIG_SPL_NAND_BOOT puts("Tertiary program loader running in sram..."); #else diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c index 3df8d21..1ab98fc 100644 --- a/board/freescale/p2041rdb/ddr.c +++ b/board/freescale/p2041rdb/ddr.c @@ -118,7 +118,7 @@ found: popts->ddr_cdr1 = DDR_CDR1_DHC_EN; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size = 0; diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c index 93003c2..d822d3f 100644 --- a/board/freescale/t102xqds/ddr.c +++ b/board/freescale/t102xqds/ddr.c @@ -169,7 +169,7 @@ void board_mem_sleep_setup(void) } #endif -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t102xqds/spl.c b/board/freescale/t102xqds/spl.c index c847b01..b987ece 100644 --- a/board/freescale/t102xqds/spl.c +++ b/board/freescale/t102xqds/spl.c @@ -142,7 +142,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_MMC_BOOT mmc_boot(); diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index 773aa77..49460a0 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -229,7 +229,7 @@ void board_mem_sleep_setup(void) } #endif -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c index 5be7162..dc6d9ee 100644 --- a/board/freescale/t102xrdb/spl.c +++ b/board/freescale/t102xrdb/spl.c @@ -129,7 +129,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_MMC_BOOT mmc_boot(); diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c index d23787d..8f7909d 100644 --- a/board/freescale/t1040qds/ddr.c +++ b/board/freescale/t1040qds/ddr.c @@ -117,7 +117,7 @@ void board_mem_sleep_setup(void) } #endif -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index b99ab95..4e55844 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -120,7 +120,7 @@ void board_mem_sleep_setup(void) } #endif -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c index 899691a..2e43307 100644 --- a/board/freescale/t104xrdb/spl.c +++ b/board/freescale/t104xrdb/spl.c @@ -125,7 +125,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) puts("\n\n"); - initdram(); + dram_init(); #ifdef CONFIG_SPL_MMC_BOOT mmc_boot(); diff --git a/board/freescale/t208xqds/ddr.c b/board/freescale/t208xqds/ddr.c index adc1090..ba65049 100644 --- a/board/freescale/t208xqds/ddr.c +++ b/board/freescale/t208xqds/ddr.c @@ -104,7 +104,7 @@ found: popts->cpo_sample = 0x64; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t208xqds/spl.c b/board/freescale/t208xqds/spl.c index 3e713dc..d7d716b 100644 --- a/board/freescale/t208xqds/spl.c +++ b/board/freescale/t208xqds/spl.c @@ -128,7 +128,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_MMC_BOOT mmc_boot(); diff --git a/board/freescale/t208xrdb/ddr.c b/board/freescale/t208xrdb/ddr.c index b4ad615..50dc69a 100644 --- a/board/freescale/t208xrdb/ddr.c +++ b/board/freescale/t208xrdb/ddr.c @@ -97,7 +97,7 @@ found: popts->cpo_sample = 0x54; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t208xrdb/spl.c b/board/freescale/t208xrdb/spl.c index a5f940c..b431401 100644 --- a/board/freescale/t208xrdb/spl.c +++ b/board/freescale/t208xrdb/spl.c @@ -98,7 +98,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_MMC_BOOT mmc_boot(); diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 84ff792..7408970 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -112,7 +112,7 @@ found: popts->cpo_sample = 0x63; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t4qds/spl.c b/board/freescale/t4qds/spl.c index 05feede..9ecdaed 100644 --- a/board/freescale/t4qds/spl.c +++ b/board/freescale/t4qds/spl.c @@ -133,7 +133,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); #ifdef CONFIG_SPL_MMC_BOOT mmc_boot(); diff --git a/board/freescale/t4rdb/ddr.c b/board/freescale/t4rdb/ddr.c index d03baa3..8415527 100644 --- a/board/freescale/t4rdb/ddr.c +++ b/board/freescale/t4rdb/ddr.c @@ -105,7 +105,7 @@ found: popts->cpo_sample = 0x64; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/freescale/t4rdb/spl.c b/board/freescale/t4rdb/spl.c index e96f3d3..5feab1c 100644 --- a/board/freescale/t4rdb/spl.c +++ b/board/freescale/t4rdb/spl.c @@ -91,7 +91,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) i2c_init_all(); - initdram(); + dram_init(); mmc_boot(); } diff --git a/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c b/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c index 4ceb48b..f186855 100644 --- a/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c +++ b/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c @@ -10,7 +10,7 @@ #include <config.h> #include <asm/leon.h> -int initdram(void) +int dram_init(void) { /* Does not set gd->ram_size here */ diff --git a/board/gaisler/gr_ep2s60/gr_ep2s60.c b/board/gaisler/gr_ep2s60/gr_ep2s60.c index 12d8c10..a73d89d 100644 --- a/board/gaisler/gr_ep2s60/gr_ep2s60.c +++ b/board/gaisler/gr_ep2s60/gr_ep2s60.c @@ -10,7 +10,7 @@ #include <config.h> #include <asm/leon.h> -int initdram(void) +int dram_init(void) { /* Does not set gd->ram_size here */ diff --git a/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c b/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c index 02beb5c..d86047a 100644 --- a/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c +++ b/board/gaisler/gr_xc3s_1500/gr_xc3s_1500.c @@ -9,7 +9,7 @@ #include <config.h> #include <asm/leon.h> -int initdram(void) +int dram_init(void) { /* Does not set gd->ram_size here */ diff --git a/board/gaisler/grsim/grsim.c b/board/gaisler/grsim/grsim.c index aa9ba50..99262b0 100644 --- a/board/gaisler/grsim/grsim.c +++ b/board/gaisler/grsim/grsim.c @@ -10,7 +10,7 @@ #include <common.h> #include <asm/leon.h> -int initdram(void) +int dram_init(void) { /* Does not set gd->ram_size here */ diff --git a/board/gaisler/grsim_leon2/grsim_leon2.c b/board/gaisler/grsim_leon2/grsim_leon2.c index 384db3d..c6c4bb4 100644 --- a/board/gaisler/grsim_leon2/grsim_leon2.c +++ b/board/gaisler/grsim_leon2/grsim_leon2.c @@ -10,7 +10,7 @@ #include <common.h> #include <asm/leon.h> -int initdram(void) +int dram_init(void) { /* Does not set gd->ram_size here */ diff --git a/board/gateworks/gw_ventana/MAINTAINERS b/board/gateworks/gw_ventana/MAINTAINERS index b44fb4d..265ddac 100644 --- a/board/gateworks/gw_ventana/MAINTAINERS +++ b/board/gateworks/gw_ventana/MAINTAINERS @@ -3,4 +3,6 @@ M: Tim Harvey <tharvey@gateworks.com> S: Maintained F: board/gateworks/gw_ventana/ F: include/configs/gw_ventana.h -F: configs/gwventana_defconfig +F: configs/gwventana_nand_defconfig +F: configs/gwventana_emmc_defconfig +F: configs/gwventana_gw5904_defconfig diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 3dc5f88..56a7b3e 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -38,6 +38,44 @@ void setup_iomux_uart(void) } /* MMC */ +static iomux_v3_cfg_t const gw5904_emmc_pads[] = { + IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)), +}; +/* 4-bit microSD on SD2 */ +static iomux_v3_cfg_t const gw5904_mmc_pads[] = { + IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + /* CD */ + IOMUX_PADS(PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), +}; +/* 8-bit eMMC on SD2/NAND */ +static iomux_v3_cfg_t const gw560x_emmc_sd2_pads[] = { + IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), +}; + static iomux_v3_cfg_t const usdhc3_pads[] = { IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), @@ -352,6 +390,107 @@ static iomux_v3_cfg_t const gw553x_gpio_pads[] = { IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), }; +static iomux_v3_cfg_t const gw560x_gpio_pads[] = { + /* RS232_EN# */ + IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG), + /* CAN_STBY */ + IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG), + /* USB_HUBRST# */ + IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), + /* PANLEDG# */ + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), + /* PANLEDR# */ + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), + /* MX6_LOCLED# */ + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), + /* IOEXP_PWREN# */ + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), + /* IOEXP_IRQ# */ + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), + /* DIOI2C_DIS# */ + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), + /* VID_EN */ + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), + /* PCI_RST# */ + IOMUX_PADS(PAD_DISP0_DAT10__GPIO4_IO31 | DIO_PAD_CFG), + /* RS485_EN */ + IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG), + /* PCIESKT_WDIS# */ + IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), + /* USBH2_PEN (OTG) */ + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), + /* 12V0_PWR_EN */ + IOMUX_PADS(PAD_DISP0_DAT5__GPIO4_IO26 | DIO_PAD_CFG), +}; + +static iomux_v3_cfg_t const gw5903_gpio_pads[] = { + /* BKLT_12VEN */ + IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG), + /* EMMY_PDN# */ + IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | DIO_PAD_CFG), + /* EMMY_CFG1# */ + IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | DIO_PAD_CFG), + /* EMMY_CFG1# */ + IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04 | DIO_PAD_CFG), + /* USBH1_PEN (EHCI) */ + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG), + /* USBH2_PEN (OTG) */ + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), + /* USBDPC_PEN */ + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), + /* TOUCH_RST */ + IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG), + /* AUDIO_RST# */ + IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG), + /* UART1_TEN# */ + IOMUX_PADS(PAD_CSI0_DAT12__GPIO5_IO30 | DIO_PAD_CFG), + /* MX6_LOCLED# */ + IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | DIO_PAD_CFG), + /* LVDS_BKLEN # */ + IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG), + /* RGMII_PDWN# */ + IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | DIO_PAD_CFG), + /* TOUCH_IRQ# */ + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), + /* TOUCH_RST# */ + IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | DIO_PAD_CFG), +}; + +static iomux_v3_cfg_t const gw5904_gpio_pads[] = { + /* USB_HUBRST# */ + IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG), + /* PANLEDG# */ + IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG), + /* PANLEDR# */ + IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG), + /* MX6_LOCLED# */ + IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG), + /* IOEXP_PWREN# */ + IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG), + /* IOEXP_IRQ# */ + IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)), + /* DIOI2C_DIS# */ + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG), + /* UART_RS485 */ + IOMUX_PADS(PAD_DISP0_DAT2__GPIO4_IO23 | DIO_PAD_CFG), + /* UART_HALF */ + IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | DIO_PAD_CFG), + /* SKT1_WDIS# */ + IOMUX_PADS(PAD_DISP0_DAT17__GPIO5_IO11 | DIO_PAD_CFG), + /* SKT1_RST# */ + IOMUX_PADS(PAD_DISP0_DAT18__GPIO5_IO12 | DIO_PAD_CFG), + /* SKT2_WDIS# */ + IOMUX_PADS(PAD_DISP0_DAT19__GPIO5_IO13 | DIO_PAD_CFG), + /* SKT2_RST# */ + IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG), + /* M2_OFF# */ + IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | DIO_PAD_CFG), + /* M2_WDIS# */ + IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | DIO_PAD_CFG), + /* M2_RST# */ + IOMUX_PADS(PAD_SD2_DAT2__GPIO1_IO13 | DIO_PAD_CFG), +}; + /* Digital I/O */ struct dio_cfg gw51xx_dio[] = { { @@ -566,6 +705,111 @@ struct dio_cfg gw553x_dio[] = { }, }; +struct dio_cfg gw560x_dio[] = { + { + { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, + IMX_GPIO_NR(1, 16), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, + IMX_GPIO_NR(1, 19), + { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, + 2 + }, + { + { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, + IMX_GPIO_NR(1, 17), + { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, + 3 + }, + { + {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, + IMX_GPIO_NR(1, 20), + { 0, 0 }, + 0 + }, +}; + +struct dio_cfg gw5903_dio[] = { +}; + +struct dio_cfg gw5904_dio[] = { + { + { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, + IMX_GPIO_NR(1, 16), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, + IMX_GPIO_NR(1, 19), + { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, + 2 + }, + { + { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, + IMX_GPIO_NR(1, 17), + { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, + 3 + }, + { + {IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) }, + IMX_GPIO_NR(1, 20), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00) }, + IMX_GPIO_NR(2, 0), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01) }, + IMX_GPIO_NR(2, 1), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02) }, + IMX_GPIO_NR(2, 2), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03) }, + IMX_GPIO_NR(2, 3), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04) }, + IMX_GPIO_NR(2, 4), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05) }, + IMX_GPIO_NR(2, 5), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06) }, + IMX_GPIO_NR(2, 6), + { 0, 0 }, + 0 + }, + { + {IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07) }, + IMX_GPIO_NR(2, 7), + { 0, 0 }, + 0 + }, +}; + /* * Board Specific GPIO */ @@ -588,6 +832,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .dioi2c_en = IMX_GPIO_NR(4, 5), .pcie_sson = IMX_GPIO_NR(1, 20), .otgpwr_en = IMX_GPIO_NR(3, 22), + .mmc_cd = IMX_GPIO_NR(7, 0), }, /* GW51xx */ @@ -631,6 +876,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .rs232_en = GP_RS232_EN, .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), + .mmc_cd = IMX_GPIO_NR(7, 0), }, /* GW53xx */ @@ -654,6 +900,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .rs232_en = GP_RS232_EN, .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), + .mmc_cd = IMX_GPIO_NR(7, 0), }, /* GW54xx */ @@ -679,6 +926,7 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .rs232_en = GP_RS232_EN, .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), + .mmc_cd = IMX_GPIO_NR(7, 0), }, /* GW551x */ @@ -726,6 +974,58 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .wdis = IMX_GPIO_NR(7, 12), .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), + .mmc_cd = IMX_GPIO_NR(7, 0), + }, + + /* GW560x */ + { + .gpio_pads = gw560x_gpio_pads, + .num_pads = ARRAY_SIZE(gw560x_gpio_pads)/2, + .dio_cfg = gw560x_dio, + .dio_num = ARRAY_SIZE(gw560x_dio), + .leds = { + IMX_GPIO_NR(4, 6), + IMX_GPIO_NR(4, 7), + IMX_GPIO_NR(4, 15), + }, + .pcie_rst = IMX_GPIO_NR(4, 31), + .mezz_pwren = IMX_GPIO_NR(2, 19), + .mezz_irq = IMX_GPIO_NR(2, 18), + .rs232_en = GP_RS232_EN, + .vidin_en = IMX_GPIO_NR(3, 31), + .wdis = IMX_GPIO_NR(7, 12), + .otgpwr_en = IMX_GPIO_NR(4, 15), + .mmc_cd = IMX_GPIO_NR(7, 0), + }, + + /* GW5903 */ + { + .gpio_pads = gw5903_gpio_pads, + .num_pads = ARRAY_SIZE(gw5903_gpio_pads)/2, + .dio_cfg = gw5903_dio, + .dio_num = ARRAY_SIZE(gw5903_dio), + .leds = { + IMX_GPIO_NR(6, 14), + }, + .otgpwr_en = IMX_GPIO_NR(4, 15), + .mmc_cd = IMX_GPIO_NR(6, 11), + }, + + /* GW5904 */ + { + .gpio_pads = gw5904_gpio_pads, + .num_pads = ARRAY_SIZE(gw5904_gpio_pads)/2, + .dio_cfg = gw5904_dio, + .dio_num = ARRAY_SIZE(gw5904_dio), + .leds = { + IMX_GPIO_NR(4, 6), + IMX_GPIO_NR(4, 7), + IMX_GPIO_NR(4, 15), + }, + .pcie_rst = IMX_GPIO_NR(1, 0), + .mezz_pwren = IMX_GPIO_NR(2, 19), + .mezz_irq = IMX_GPIO_NR(2, 18), + .otgpwr_en = IMX_GPIO_NR(3, 22), }, }; @@ -834,6 +1134,50 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info) gpio_direction_input(gpio_cfg[board].vsel_pin); gpio_cfg[board].usd_vsel = !gpio_get_value(gpio_cfg[board].vsel_pin); } + + /* microSD CD */ + if (gpio_cfg[board].mmc_cd) { + gpio_request(gpio_cfg[board].mmc_cd, "sd_cd"); + gpio_direction_input(gpio_cfg[board].mmc_cd); + } + + /* Anything else board specific */ + switch(board) { + case GW560x: + gpio_request(IMX_GPIO_NR(4, 26), "12p0_en"); + gpio_direction_output(IMX_GPIO_NR(4, 26), 1); + break; + case GW5903: + gpio_request(IMX_GPIO_NR(3, 31) , "usbh1-ehci_pwr"); + gpio_direction_output(IMX_GPIO_NR(3, 31), 1); + gpio_request(IMX_GPIO_NR(4, 15) , "usbh2-otg_pwr"); + gpio_direction_output(IMX_GPIO_NR(4, 15), 1); + gpio_request(IMX_GPIO_NR(4, 7) , "usbdpc_pwr"); + gpio_direction_output(IMX_GPIO_NR(4, 15), 1); + gpio_request(IMX_GPIO_NR(1, 25) , "rgmii_en"); + gpio_direction_output(IMX_GPIO_NR(1, 25), 1); + gpio_request(IMX_GPIO_NR(4, 6) , "touch_irq#"); + gpio_direction_input(IMX_GPIO_NR(4, 6)); + gpio_request(IMX_GPIO_NR(4, 8) , "touch_rst"); + gpio_direction_output(IMX_GPIO_NR(4, 8), 1); + gpio_request(IMX_GPIO_NR(1, 7) , "bklt_12ven"); + gpio_direction_output(IMX_GPIO_NR(1, 7), 1); + break; + case GW5904: + gpio_request(IMX_GPIO_NR(5, 11), "skt1_wdis#"); + gpio_direction_output(IMX_GPIO_NR(5, 11), 1); + gpio_request(IMX_GPIO_NR(5, 12), "skt1_rst#"); + gpio_direction_output(IMX_GPIO_NR(5, 12), 1); + gpio_request(IMX_GPIO_NR(5, 13), "skt2_wdis#"); + gpio_direction_output(IMX_GPIO_NR(5, 13), 1); + gpio_request(IMX_GPIO_NR(1, 15), "m2_off#"); + gpio_direction_output(IMX_GPIO_NR(1, 15), 1); + gpio_request(IMX_GPIO_NR(1, 14), "m2_wdis#"); + gpio_direction_output(IMX_GPIO_NR(1, 14), 1); + gpio_request(IMX_GPIO_NR(1, 13), "m2_rst#"); + gpio_direction_output(IMX_GPIO_NR(1, 13), 1); + break; + } } /* setup GPIO pinmux and default configuration per baseboard and env */ @@ -926,6 +1270,8 @@ void setup_board_gpio(int board, struct ventana_board_info *info) void setup_pmic(void) { struct pmic *p; + struct ventana_board_info ventana_info; + int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); u32 reg; i2c_set_bus_num(CONFIG_I2C_PMIC); @@ -958,23 +1304,40 @@ void setup_pmic(void) debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR); power_ltc3676_init(CONFIG_I2C_PMIC); p = pmic_get("LTC3676_PMIC"); - if (p && !pmic_probe(p)) { - puts("PMIC: LTC3676\n"); - /* - * set board-specific scalar for max CPU frequency - * per CPU based on the LDO enabled Operating Ranges - * defined in the respective IMX6DQ and IMX6SDL - * datasheets. The voltage resulting from the R1/R2 - * feedback inputs on Ventana is 1308mV. Note that this - * is a bit shy of the Vmin of 1350mV in the datasheet - * for LDO enabled mode but is as high as we can go. - * - * We will rely on an OS kernel driver to properly - * regulate these per CPU operating point and use LDO - * bypass mode when using the higher frequency - * operating points to compensate as LDO bypass mode - * allows the rails be 125mV lower. - */ + if (!p || pmic_probe(p)) + return; + puts("PMIC: LTC3676\n"); + /* + * set board-specific scalar for max CPU frequency + * per CPU based on the LDO enabled Operating Ranges + * defined in the respective IMX6DQ and IMX6SDL + * datasheets. The voltage resulting from the R1/R2 + * feedback inputs on Ventana is 1308mV. Note that this + * is a bit shy of the Vmin of 1350mV in the datasheet + * for LDO enabled mode but is as high as we can go. + */ + switch (board) { + case GW560x: + /* mask PGOOD during SW3 transition */ + pmic_reg_write(p, LTC3676_DVB3B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW3 (VDD_ARM) */ + pmic_reg_write(p, LTC3676_DVB3A, 0x1f); + break; + case GW5903: + /* mask PGOOD during SW1 transition */ + pmic_reg_write(p, LTC3676_DVB3B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW3 (VDD_ARM) */ + pmic_reg_write(p, LTC3676_DVB3A, 0x1f); + + /* mask PGOOD during SW4 transition */ + pmic_reg_write(p, LTC3676_DVB4B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW4 (VDD_SOC) */ + pmic_reg_write(p, LTC3676_DVB4A, 0x1f); + break; + default: /* mask PGOOD during SW1 transition */ pmic_reg_write(p, LTC3676_DVB1B, 0x1f | LTC3676_PGOOD_MASK); @@ -991,23 +1354,96 @@ void setup_pmic(void) } #ifdef CONFIG_FSL_ESDHC -static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR }; +static struct fsl_esdhc_cfg usdhc_cfg[2]; int board_mmc_init(bd_t *bis) { - /* Only one USDHC controller on Ventana */ - SETUP_IOMUX_PADS(usdhc3_pads); - usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg.max_bus_width = 4; - - return fsl_esdhc_initialize(bis, &usdhc_cfg); + struct ventana_board_info ventana_info; + int board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info); + int ret; + + switch (board_type) { + case GW52xx: + case GW53xx: + case GW54xx: + case GW553x: + /* usdhc3: 4bit microSD */ + SETUP_IOMUX_PADS(usdhc3_pads); + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + case GW560x: + /* usdhc2: 8-bit eMMC */ + SETUP_IOMUX_PADS(gw560x_emmc_sd2_pads); + usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + usdhc_cfg[0].max_bus_width = 8; + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + if (ret) + return ret; + /* usdhc3: 4-bit microSD */ + SETUP_IOMUX_PADS(usdhc3_pads); + usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].max_bus_width = 4; + return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); + case GW5903: + /* usdhc3: 8-bit eMMC */ + SETUP_IOMUX_PADS(gw5904_emmc_pads); + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 8; + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + if (ret) + return ret; + /* usdhc2: 4-bit microSD */ + SETUP_IOMUX_PADS(gw5904_mmc_pads); + usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR; + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + usdhc_cfg[1].max_bus_width = 4; + return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); + case GW5904: + /* usdhc3: 8bit eMMC */ + SETUP_IOMUX_PADS(gw5904_emmc_pads); + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 8; + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + default: + /* doesn't have MMC */ + return -1; + } } int board_mmc_getcd(struct mmc *mmc) { + struct ventana_board_info ventana_info; + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); + int gpio = gpio_cfg[board].mmc_cd; + /* Card Detect */ - gpio_request(GP_SD3_CD, "sd_cd"); - gpio_direction_input(GP_SD3_CD); - return !gpio_get_value(GP_SD3_CD); + switch (board) { + case GW560x: + /* emmc is always present */ + if (cfg->esdhc_base == USDHC2_BASE_ADDR) + return 1; + break; + case GW5903: + case GW5904: + /* emmc is always present */ + if (cfg->esdhc_base == USDHC3_BASE_ADDR) + return 1; + break; + } + + if (gpio) { + debug("%s: gpio%d=%d\n", __func__, gpio, gpio_get_value(gpio)); + return !gpio_get_value(gpio); + } + + return -1; } + #endif /* CONFIG_FSL_ESDHC */ diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index 18909a0..3eb4c59 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -13,7 +13,6 @@ /* GPIO's common to all baseboards */ #define GP_PHY_RST IMX_GPIO_NR(1, 30) -#define GP_SD3_CD IMX_GPIO_NR(7, 0) #define GP_RS232_EN IMX_GPIO_NR(2, 11) #define GP_MSATA_SEL IMX_GPIO_NR(2, 8) @@ -79,6 +78,7 @@ struct ventana { int rs232_en; int otgpwr_en; int vsel_pin; + int mmc_cd; /* various features */ bool usd_vsel; }; diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index 1382e5d..2c07a84 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -64,6 +64,7 @@ read_eeprom(int bus, struct ventana_board_info *info) if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0) baseboard = '0'; + type = GW_UNKNOWN; switch (baseboard) { case '0': /* original GW5400-A prototype */ type = GW54proto; @@ -91,10 +92,16 @@ read_eeprom(int bus, struct ventana_board_info *info) type = GW553x; break; } - /* fall through */ - default: - printf("EEPROM: Unknown model in EEPROM: %s\n", info->model); - type = GW_UNKNOWN; + break; + case '6': + if (info->model[4] == '0') + type = GW560x; + break; + case '9': + if (info->model[4] == '0' && info->model[5] == '3') + type = GW5903; + if (info->model[4] == '0' && info->model[5] == '4') + type = GW5904; break; } return type; diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c index 613a275..68b1ddb 100644 --- a/board/gateworks/gw_ventana/gsc.c +++ b/board/gateworks/gw_ventana/gsc.c @@ -137,6 +137,10 @@ int gsc_info(int verbose) break; case '5': /* GW55xx */ break; + case '6': /* GW560x */ + read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); + read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); + break; } return 0; } diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 3f9d2f7..dc8cd88 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -132,8 +132,9 @@ static void setup_iomux_enet(int gpio) /* toggle PHY_RST# */ gpio_request(gpio, "phy_rst#"); gpio_direction_output(gpio, 0); - mdelay(2); + mdelay(10); gpio_set_value(gpio, 1); + mdelay(100); } #ifdef CONFIG_USB_EHCI_MX6 @@ -226,12 +227,56 @@ int board_phy_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); } + /* TI DP83867 */ + else if (phydev->phy_id == 0x2000a231) { + /* configure register 0x170 for ref CLKOUT */ + phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f); + phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170); + phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x401f); + val = phy_read(phydev, MDIO_DEVAD_NONE, 14); + val &= ~0x1f00; + val |= 0x0b00; /* chD tx clock*/ + phy_write(phydev, MDIO_DEVAD_NONE, 14, val); + } + if (phydev->drv->config) phydev->drv->config(phydev); return 0; } +#ifdef CONFIG_MV88E61XX_SWITCH +int mv88e61xx_hw_reset(struct phy_device *phydev) +{ + struct mii_dev *bus = phydev->bus; + + /* GPIO[0] output, CLK125 */ + debug("enabling RGMII_REFCLK\n"); + bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0, + 0x1a /*MV_SCRATCH_MISC*/, + (1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe); + bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0, + 0x1a /*MV_SCRATCH_MISC*/, + (1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7); + + /* RGMII delay - Physical Control register bit[15:14] */ + debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT); + /* forced 1000mbps full-duplex link */ + bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe); + phydev->autoneg = AUTONEG_DISABLE; + phydev->speed = SPEED_1000; + phydev->duplex = DUPLEX_FULL; + + /* LED configuration: 7:4-green (8=Activity) 3:0 amber (9=10Link) */ + bus->write(bus, 0x10, 0, 0x16, 0x8089); + bus->write(bus, 0x11, 0, 0x16, 0x8089); + bus->write(bus, 0x12, 0, 0x16, 0x8089); + bus->write(bus, 0x13, 0, 0x16, 0x8089); + + return 0; +} +#endif // CONFIG_MV88E61XX_SWITCH + int board_eth_init(bd_t *bis) { #ifdef CONFIG_FEC_MXC @@ -661,6 +706,8 @@ int checkboard(void) static const struct boot_mode board_boot_modes[] = { /* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */ { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) }, + { "emmc2", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00) }, /* GW5600 */ + { "emmc3", MAKE_CFGVAL(0x60, 0x50, 0x00, 0x00) }, /* GW5903/GW5904 */ { NULL, 0 }, }; #endif @@ -712,7 +759,8 @@ int misc_init_r(void) setenv("fdt_file1", fdt); if (board_type != GW551x && board_type != GW552x && - board_type != GW553x) + board_type != GW553x && + board_type != GW560x) str[4] = 'x'; str[5] = 'x'; str[6] = 0; diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 8cc2a57..6060b44 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -374,6 +374,25 @@ static struct mx6_mmdc_calibration mx6sdl_256x64_mmdc_calib = { .p1_mpwrdlctl = 0x383A3930, }; +static struct mx6_mmdc_calibration mx6sdl_256x64x2_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x001F003F, + .p0_mpwldectrl1 = 0x001F001F, + .p1_mpwldectrl0 = 0x001F004E, + .p1_mpwldectrl1 = 0x0059001F, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x42220225, + .p0_mpdgctrl1 = 0x0213021F, + .p1_mpdgctrl0 = 0x022C0242, + .p1_mpdgctrl1 = 0x022C0244, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x474A4C4A, + .p1_mprddlctl = 0x48494C45, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x3F3F3F36, + .p1_mpwrdlctl = 0x3F36363F, +}; + static struct mx6_mmdc_calibration mx6dq_512x32_mmdc_calib = { /* write leveling calibration determine */ .p0_mpwldectrl0 = 0x002A0025, @@ -510,10 +529,25 @@ static void spl_dram_init(int width, int size_mb, int board_model) calib = &mx6sdl_256x64_mmdc_calib; debug("4gB density\n"); } else if (width == 64 && size_mb == 4096) { - mem = &mt41k512m16ha_125; - if (is_cpu_type(MXC_CPU_MX6Q)) - calib = &mx6dq_512x64_mmdc_calib; - debug("8gB density\n"); + switch(board_model) { + case GW5903: + /* 8xMT41K256M16 (4GiB) fly-by mirrored 2-chipsels */ + mem = &mt41k256m16ha_125; + debug("4gB density\n"); + if (!is_cpu_type(MXC_CPU_MX6Q)) { + calib = &mx6sdl_256x64x2_mmdc_calib; + sysinfo.ncs = 2; + sysinfo.cs_density = 18; /* CS0_END=71 */ + sysinfo.cs1_mirror = 1; /* mirror enabled */ + } + break; + default: + mem = &mt41k512m16ha_125; + if (is_cpu_type(MXC_CPU_MX6Q)) + calib = &mx6dq_512x64_mmdc_calib; + debug("8gB density\n"); + break; + } } if (!(mem && calib)) { @@ -608,6 +642,20 @@ void board_init_f(ulong dummy) memset(__bss_start, 0, __bss_end - __bss_start); } +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = spl_boot_device(); + switch (spl_boot_list[0]) { + case BOOT_DEVICE_NAND: + spl_boot_list[1] = BOOT_DEVICE_MMC1; + spl_boot_list[2] = BOOT_DEVICE_UART; + break; + case BOOT_DEVICE_MMC1: + spl_boot_list[1] = BOOT_DEVICE_UART; + break; + } +} + /* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */ /* its our chance to print info about boot device */ void spl_board_init(void) diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h index 9ffad58..8a42d67 100644 --- a/board/gateworks/gw_ventana/ventana_eeprom.h +++ b/board/gateworks/gw_ventana/ventana_eeprom.h @@ -112,6 +112,9 @@ enum { GW551x, GW552x, GW553x, + GW560x, + GW5903, + GW5904, GW_UNKNOWN, GW_BADCRC, }; diff --git a/board/gdsys/mpc8308/sdram.c b/board/gdsys/mpc8308/sdram.c index 5b67a01..5d2ec89 100644 --- a/board/gdsys/mpc8308/sdram.c +++ b/board/gdsys/mpc8308/sdram.c @@ -66,7 +66,7 @@ static long fixed_sdram(void) return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); } -int initdram(void) +int dram_init(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize; diff --git a/board/ids/ids8313/ids8313.c b/board/ids/ids8313/ids8313.c index d8e6701..4433e8c 100644 --- a/board/ids/ids8313/ids8313.c +++ b/board/ids/ids8313/ids8313.c @@ -119,7 +119,7 @@ static int setup_sdram(void) return msize; } -int initdram(void) +int dram_init(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; fsl_lbc_t *lbc = &im->im_lbc; diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c index 129eb47..3486137 100644 --- a/board/ifm/ac14xx/ac14xx.c +++ b/board/ifm/ac14xx/ac14xx.c @@ -310,7 +310,7 @@ u32 sdram_init_seq[] = { /* EMPTY, optional, we don't do it */ }; -int initdram(void) +int dram_init(void) { gd->ram_size = fixed_sdram(NULL, sdram_init_seq, ARRAY_SIZE(sdram_init_seq)); diff --git a/board/ifm/o2dnt2/o2dnt2.c b/board/ifm/o2dnt2/o2dnt2.c index 4f81007..7770806 100644 --- a/board/ifm/o2dnt2/o2dnt2.c +++ b/board/ifm/o2dnt2/o2dnt2.c @@ -62,11 +62,11 @@ static void sdram_start(int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { struct mpc5xxx_mmap_ctl *mmap_ctl = (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; diff --git a/board/imgtec/boston/ddr.c b/board/imgtec/boston/ddr.c index b92ff2a..3479b98 100644 --- a/board/imgtec/boston/ddr.c +++ b/board/imgtec/boston/ddr.c @@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; -int initdram(void) +int dram_init(void) { u32 ddrconf0 = __raw_readl((uint32_t *)BOSTON_PLAT_DDRCONF0); diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c index f8c65b0..de81aa0 100644 --- a/board/imgtec/malta/malta.c +++ b/board/imgtec/malta/malta.c @@ -85,7 +85,7 @@ static enum sys_con malta_sys_con(void) } } -int initdram(void) +int dram_init(void) { gd->ram_size = CONFIG_SYS_MEM_SIZE; diff --git a/board/imgtec/xilfpga/xilfpga.c b/board/imgtec/xilfpga/xilfpga.c index 8aa7c10..841d614 100644 --- a/board/imgtec/xilfpga/xilfpga.c +++ b/board/imgtec/xilfpga/xilfpga.c @@ -14,7 +14,7 @@ DECLARE_GLOBAL_DATA_PTR; /* initialize the DDR Controller and PHY */ -int initdram(void) +int dram_init(void) { /* MIG IP block is smart and doesn't need SW * to do any init */ diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c index 2dd9799..88cae59 100644 --- a/board/inka4x0/inka4x0.c +++ b/board/inka4x0/inka4x0.c @@ -74,12 +74,12 @@ static void sdram_start (int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { volatile struct mpc5xxx_mmap_ctl *mm = (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c index 922d9ef..b8bc045 100644 --- a/board/intercontrol/digsy_mtc/digsy_mtc.c +++ b/board/intercontrol/digsy_mtc/digsy_mtc.c @@ -74,12 +74,12 @@ static void sdram_start(int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if * CONFIG_SYS_SDRAM_BASE is something other than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/ipek01/ipek01.c b/board/ipek01/ipek01.c index ca99332..133db8c 100644 --- a/board/ipek01/ipek01.c +++ b/board/ipek01/ipek01.c @@ -75,12 +75,12 @@ static void sdram_start (int hi_addr) } /* - * ATTENTION: Although partially referenced initdram does NOT make real + * ATTENTION: Although partially referenced dram_init does NOT make real * use of CONFIG_SYS_SDRAM_BASE. The code does not work if * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { struct mpc5xxx_mmap_ctl *mmap_ctl = (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index d134691..ea24eaa 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -73,12 +73,12 @@ static void sdram_start (int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index bbabbcf..51b4571 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -291,7 +291,7 @@ static long probe_sdram(memctl8260_t *memctl) #endif /* CONFIG_SYS_SDRAM_LIST */ -int initdram(void) +int dram_init(void) { immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; memctl8260_t *memctl = &immap->im_memctl; diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index f83fa06..8020c37 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -330,7 +330,7 @@ static int fixed_sdram(void) return msize; } -int initdram(void) +int dram_init(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/keymile/kmp204x/ddr.c b/board/keymile/kmp204x/ddr.c index 006b809..6f82e15 100644 --- a/board/keymile/kmp204x/ddr.c +++ b/board/keymile/kmp204x/ddr.c @@ -50,7 +50,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size = 0; diff --git a/board/l+g/vinco/vinco.c b/board/l+g/vinco/vinco.c index 3d7af09..a938a2c 100644 --- a/board/l+g/vinco/vinco.c +++ b/board/l+g/vinco/vinco.c @@ -51,9 +51,9 @@ void spi_cs_deactivate(struct spi_slave *slave) static void vinco_spi0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ + at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ @@ -76,16 +76,16 @@ static void vinco_usb_hw_init(void) #ifdef CONFIG_GENERIC_ATMEL_MCI void vinco_mci0_hw_init(void) { - at91_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI0 CDA */ - at91_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI0 DA0 */ - at91_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI0 DA1 */ - at91_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI0 DA2 */ - at91_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI0 DA3 */ - at91_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI0 DA4 */ - at91_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI0 DA5 */ - at91_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI0 DA6 */ - at91_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI0 DA7 */ - at91_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI0 CLK */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI0 CDA */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI0 DA0 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI0 DA1 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI0 DA2 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI0 DA3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI0 DA4 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI0 DA5 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI0 DA6 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI0 DA7 */ + at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI0 CLK */ /* * As the mci io internal pull down is too strong, so if the io needs @@ -93,16 +93,16 @@ void vinco_mci0_hw_init(void) * the power consumption will increase, so disable the interanl pull * down to save the power. */ - at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0); - at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0); /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_MCI0); @@ -120,16 +120,16 @@ int board_mmc_init(bd_t *bis) #ifdef CONFIG_MACB void vinco_macb0_hw_init(void) { - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ + at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_GMAC0); @@ -141,8 +141,8 @@ void vinco_macb0_hw_init(void) static void vinco_serial3_hw_init(void) { - at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ - at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ + at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_USART3); diff --git a/board/liebherr/lwmon5/sdram.c b/board/liebherr/lwmon5/sdram.c index f7251e5..4a65d74 100644 --- a/board/liebherr/lwmon5/sdram.c +++ b/board/liebherr/lwmon5/sdram.c @@ -144,10 +144,10 @@ static void program_ecc(u32 start_address, /************************************************************************* * - * initdram -- 440EPx's DDR controller is a DENALI Core + * dram_init -- 440EPx's DDR controller is a DENALI Core * ************************************************************************/ -int initdram(void) +int dram_init(void) { /* CL=4 */ mtsdram(DDR0_02, 0x00000000); diff --git a/board/logicpd/imx6/Kconfig b/board/logicpd/imx6/Kconfig new file mode 100644 index 0000000..f5e2f58 --- /dev/null +++ b/board/logicpd/imx6/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MX6LOGICPD + +config SYS_BOARD + default "imx6" + +config SYS_VENDOR + default "logicpd" + +config SYS_CONFIG_NAME + default "imx6_logic" + +endif diff --git a/board/logicpd/imx6/MAINTAINERS b/board/logicpd/imx6/MAINTAINERS new file mode 100644 index 0000000..5db7d2c --- /dev/null +++ b/board/logicpd/imx6/MAINTAINERS @@ -0,0 +1,6 @@ +MX6LOGICPD BOARD +M: Adam Ford <aford173@gmail.com> +S: Maintained +F: board/logicpd/imx6/ +F: include/configs/imx6_logic.h +F: configs/imx6q_logic_defconfig diff --git a/board/logicpd/imx6/Makefile b/board/logicpd/imx6/Makefile new file mode 100644 index 0000000..337df92 --- /dev/null +++ b/board/logicpd/imx6/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2011 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := imx6logic.o + diff --git a/board/logicpd/imx6/README b/board/logicpd/imx6/README new file mode 100644 index 0000000..df43b55 --- /dev/null +++ b/board/logicpd/imx6/README @@ -0,0 +1,37 @@ +U-Boot for LogicPD i.MX6 Development Kit +---------------------------------------- + +This file contains information for the port of U-Boot to the Logic PD Development kit. + +Logic PD has an i.MX6 System On Module (SOM) and a correspondong development +board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has +an SMSC Ethernet PHY, serial debug port and a variety of peripherals. + +On the intial release, the SOM came with either an i.MX6D or i.MX6Q. + +For more details about Logic PD i.MX6 Development kit, visit: +https://www.logicpd.com/ + +Building U-Boot for Logic PD Development Kit +-------------------------------------------- +To build U-Boot for the Dual and Quad variants: + + make imx6q_logic_defconfig + make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- + + +Flashing U-Boot into the SD card +-------------------------------- + +See README.imximage for details on booting from SD + +Flashing U-Boot into NAND +------------------------- +Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following: +with: + + kobs-ng init -v -x u-boot-dtb.imx + +Additional Support Documentation can be found at: +https://support.logicpd.com/ + diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c new file mode 100644 index 0000000..5576799 --- /dev/null +++ b/board/logicpd/imx6/imx6logic.c @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2017 Logic PD, Inc. + * + * Author: Adam Ford <aford173@gmail.com> + * + * Based on SabreSD by Fabio Estevam <fabio.estevam@nxp.com> + * and updates by Jagan Teki <jagan@amarulasolutions.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <miiphy.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <linux/sizes.h> +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/iomux-v3.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define NAND_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD4_DAT5__UART2_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD4_DAT6__UART2_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart3_pads[] = { + MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_EB3__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void fixup_enet_clock(void) +{ + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct gpio_desc nint; + struct gpio_desc reset; + int ret; + + /* Set Ref Clock to 50 MHz */ + enable_fec_anatop_clock(0, ENET_50MHZ); + + /* Set GPIO_16 as ENET_REF_CLK_OUT */ + setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK); + + /* Request GPIO Pins to reset Ethernet with new clock */ + ret = dm_gpio_lookup_name("GPIO4_7", &nint); + if (ret) { + printf("Unable to lookup GPIO4_7\n"); + return; + } + + ret = dm_gpio_request(&nint, "eth0_nInt"); + if (ret) { + printf("Unable to request eth0_nInt\n"); + return; + } + + /* Ensure nINT is input or PHY won't startup */ + dm_gpio_set_dir_flags(&nint, GPIOD_IS_IN); + + ret = dm_gpio_lookup_name("GPIO4_9", &reset); + if (ret) { + printf("Unable to lookup GPIO4_9\n"); + return; + } + + ret = dm_gpio_request(&reset, "eth0_reset"); + if (ret) { + printf("Unable to request eth0_reset\n"); + return; + } + + /* Reset LAN8710A PHY */ + dm_gpio_set_dir_flags(&reset, GPIOD_IS_OUT); + dm_gpio_set_value(&reset, 0); + udelay(150); + dm_gpio_set_value(&reset, 1); + mdelay(50); +} + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); + imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); +} + +static iomux_v3_cfg_t const nand_pads[] = { + MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), + MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), +}; + +static void setup_nand_pins(void) +{ + imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads)); +} + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + +int board_early_init_f(void) +{ + fixup_enet_clock(); + setup_iomux_uart(); + setup_nand_pins(); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + return 0; +} + +int board_late_init(void) +{ + setenv("board_name", "imx6logic"); + + if (is_mx6dq()) { + setenv("board_rev", "MX6DQ"); + setenv("fdt_file", "imx6q-logicpd.dtb"); + } + + return 0; +} diff --git a/board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg b/board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg new file mode 100644 index 0000000..b206548 --- /dev/null +++ b/board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2017 Logic PD, Inc. + * Adam Ford <aford173@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#include <asm/imx-common/imximage.cfg> + +/* image version */ +IMAGE_VERSION 2 + +BOOT_OFFSET FLASH_OFFSET_STANDARD + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch-mx6/mx6-ddr.h" +#include "asm/arch-mx6/iomux.h" +#include "asm/arch-mx6/crm_regs.h" + +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030 +DATA 4, MX6_IOM_DRAM_CAS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00000030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RESET, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000030 +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002D003A +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0038002B +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03340338 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0334032C +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4036383C +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x2E384038 +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDCFG0, 0xB8BE7955 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00BE1023 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 +DATA 4, MX6_MMDC_P0_MDCTL, 0x85190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00888032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0xFFFFF300 +DATA 4, CCM_CCGR5, 0x0F0000F3 +DATA 4, CCM_CCGR6, 0x00000FFF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 MX6_IOMUXC_GPR4 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 MX6_IOMUXC_GPR6 0x007F007F +DATA 4 MX6_IOMUXC_GPR7 0x007F007F diff --git a/board/micronas/vct/vct.c b/board/micronas/vct/vct.c index 02824ea..8bf8d5f 100644 --- a/board/micronas/vct/vct.c +++ b/board/micronas/vct/vct.c @@ -61,7 +61,7 @@ void _machine_restart(void) * SDRAM is already configured by the bootstrap code, only return the * auto-detected size here */ -int initdram(void) +int dram_init(void) { gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20); diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index a2520bc..7883a17 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -118,7 +118,7 @@ static void sdram_start(int hi_addr) /* * Initalize SDRAM - configure SDRAM controller, detect memory size. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; #ifndef CONFIG_SYS_RAMBOOT diff --git a/board/mpc8308_p1m/sdram.c b/board/mpc8308_p1m/sdram.c index e0f4671..05c477d 100644 --- a/board/mpc8308_p1m/sdram.c +++ b/board/mpc8308_p1m/sdram.c @@ -61,7 +61,7 @@ static long fixed_sdram(void) return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); } -int initdram(void) +int dram_init(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize; diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index e642296..4d8671f 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -615,14 +615,14 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */ /* - initdram() reads EEPROM via I2c. EEPROM contains all of + dram_init() reads EEPROM via I2c. EEPROM contains all of the necessary info for SDRAM controller configuration */ /* ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */ static int test_dram (unsigned long ramsize); -int initdram(void) +int dram_init(void) { unsigned long bank_reg[4], tmp, bank_size; diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c index 7b7b93f..1288f74 100644 --- a/board/mpl/pati/pati.c +++ b/board/mpl/pati/pati.c @@ -135,7 +135,7 @@ extern int mem_test (unsigned long start, unsigned long ramsize, int quiet); /* * Get RAM size. */ -int initdram(void) +int dram_init(void) { unsigned char board_rev; unsigned long reg; diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index c07d8f8..408518d 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -605,14 +605,14 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */ /* - initdram() reads EEPROM via I2c. EEPROM contains all of + dram_init() reads EEPROM via I2c. EEPROM contains all of the necessary info for SDRAM controller configuration */ /* ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */ static int test_dram (unsigned long ramsize); -int initdram(void) +int dram_init(void) { unsigned long bank_reg[4], tmp, bank_size; int i, ds; diff --git a/board/munices/munices.c b/board/munices/munices.c index 8f1a5a8..468eb37 100644 --- a/board/munices/munices.c +++ b/board/munices/munices.c @@ -55,12 +55,12 @@ static void sdram_start (int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c index e473531..1c0540a 100644 --- a/board/pb1x00/pb1x00.c +++ b/board/pb1x00/pb1x00.c @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR; -int initdram(void) +int dram_init(void) { /* Sdram is setup by assembler code */ /* If memory could be changed, we should return the true value here */ diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index c833aec..9db31d3 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -48,7 +48,7 @@ sdram_conf_t mddrc_config[] = { }, }; -int initdram(void) +int dram_init(void) { int i; u32 msize = 0; diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c index 19d8716..983559e 100644 --- a/board/phytec/pcm030/pcm030.c +++ b/board/phytec/pcm030/pcm030.c @@ -69,13 +69,13 @@ static void sdram_start(int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make + * ATTENTION: Although partially referenced dram_init does NOT make * real use of CONFIG_SYS_SDRAM_BASE. The code does not * work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { volatile struct mpc5xxx_mmap_ctl *mm = (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; diff --git a/board/qemu-mips/qemu-mips.c b/board/qemu-mips/qemu-mips.c index 2638ea6..583acc2 100644 --- a/board/qemu-mips/qemu-mips.c +++ b/board/qemu-mips/qemu-mips.c @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR; -int initdram(void) +int dram_init(void) { /* Sdram is setup by assembler code */ /* If memory could be changed, we should return the true value here */ diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index f01cd7e..a3395ed 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -37,7 +37,7 @@ int board_early_init_f (void) #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) -int initdram(void) +int dram_init(void) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 44842d5..08ced10 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -39,7 +39,7 @@ int checkboard (void) return 0; } -int initdram(void) +int dram_init(void) { long dram_size = 0; diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c index e2b9123..3bfe511 100644 --- a/board/sysam/amcore/amcore.c +++ b/board/sysam/amcore/amcore.c @@ -40,7 +40,7 @@ int checkboard(void) } /* - * in initdram we are here executing from flash + * in dram_init we are here executing from flash * case 1: * is with no ACR/flash cache enabled * nop = 40ns (scope measured) @@ -51,7 +51,7 @@ void fudelay(int usec) asm volatile ("nop"); } -int initdram(void) +int dram_init(void) { u32 dramsize, RC; diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index baf3208..92db093 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -128,12 +128,12 @@ static void sdram_start (int hi_addr) #endif /* - * ATTENTION: Although partially referenced initdram does NOT make real use + * ATTENTION: Although partially referenced dram_init does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index 0968e49..4642342 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -66,7 +66,7 @@ int board_early_init_r (void) { /************************************************************************** * DRAM initalization and size detection */ -int initdram(void) +int dram_init(void) { long bank_size; long size; diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c index 489a22c..58bd7fa 100644 --- a/board/tqc/tqm8xx/tqm8xx.c +++ b/board/tqc/tqm8xx/tqm8xx.c @@ -126,7 +126,7 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ -int initdram(void) +int dram_init(void) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c index c271fb5..73227c1 100644 --- a/board/v38b/v38b.c +++ b/board/v38b/v38b.c @@ -57,7 +57,7 @@ static void sdram_start(int hi_addr) #endif /* !CONFIG_SYS_RAMBOOT */ -int initdram(void) +int dram_init(void) { ulong dramsize = 0; ulong dramsize2 = 0; diff --git a/board/varisys/cyrus/ddr.c b/board/varisys/cyrus/ddr.c index abf4e93..2ba7b3a 100644 --- a/board/varisys/cyrus/ddr.c +++ b/board/varisys/cyrus/ddr.c @@ -168,7 +168,7 @@ found: popts->ddr_cdr1 = DDR_CDR1_DHC_EN; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size; diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c index 37441c7..3818ab9 100644 --- a/board/ve8313/ve8313.c +++ b/board/ve8313/ve8313.c @@ -88,7 +88,7 @@ static long fixed_sdram(void) return msize; } -int initdram(void) +int dram_init(void) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; volatile fsl_lbc_t *lbc = &im->im_lbc; diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index df5a7a0..ef646fa 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -116,7 +116,7 @@ int checkboard(void) return 0; } -int initdram(void) +int dram_init(void) { gd->ram_size = spd_sdram(); diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index e436c28..19b96f6 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -58,7 +58,7 @@ int board_early_init_r(void) return 0; } -int initdram(void) +int dram_init(void) { phys_size_t dram_size = fsl_ddr_sdram(); diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c index 6148a4b..be6b4dc 100644 --- a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c +++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c @@ -23,7 +23,7 @@ int checkboard(void) return 0; } -int initdram(void) +int dram_init(void) { gd->ram_size = get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c index d7e6aee..07a3ab7 100644 --- a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c @@ -19,7 +19,7 @@ int checkboard(void) return 0; } -int initdram(void) +int dram_init(void) { gd->ram_size = get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); @@ -9,7 +9,7 @@ #include <common.h> #include <command.h> #include <environment.h> -#include <aes.h> +#include <uboot_aes.h> #include <malloc.h> #include <asm/byteorder.h> #include <linux/compiler.h> @@ -710,7 +710,7 @@ static int do_mmc_setdsr(cmd_tbl_t *cmdtp, int flag, if (argc != 2) return CMD_RET_USAGE; - val = simple_strtoul(argv[2], NULL, 16); + val = simple_strtoul(argv[1], NULL, 16); mmc = find_mmc_device(curr_device); if (!mmc) { @@ -606,6 +606,47 @@ static int pci_cfg_modify(pci_dev_t bdf, ulong addr, ulong size, ulong value, return 0; } +#ifdef CONFIG_DM_PCI +static const struct pci_flag_info { + uint flag; + const char *name; +} pci_flag_info[] = { + { PCI_REGION_IO, "io" }, + { PCI_REGION_PREFETCH, "prefetch" }, + { PCI_REGION_SYS_MEMORY, "sysmem" }, + { PCI_REGION_RO, "readonly" }, + { PCI_REGION_IO, "io" }, +}; + +static void pci_show_regions(struct udevice *bus) +{ + struct pci_controller *hose = dev_get_uclass_priv(bus); + const struct pci_region *reg; + int i, j; + + if (!hose) { + printf("Bus '%s' is not a PCI controller\n", bus->name); + return; + } + + printf("# %-16s %-16s %-16s %s\n", "Bus start", "Phys start", "Size", + "Flags"); + for (i = 0, reg = hose->regions; i < hose->region_count; i++, reg++) { + printf("%d %#016llx %#016llx %#016llx ", i, + (unsigned long long)reg->bus_start, + (unsigned long long)reg->phys_start, + (unsigned long long)reg->size); + if (!(reg->flags & PCI_REGION_TYPE)) + printf("mem "); + for (j = 0; j < ARRAY_SIZE(pci_flag_info); j++) { + if (reg->flags & pci_flag_info[j].flag) + printf("%s ", pci_flag_info[j].name); + } + printf("\n"); + } +} +#endif + /* PCI Configuration Space access commands * * Syntax: @@ -657,10 +698,11 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) pci_init(); return 0; #endif + case 'r': /* no break */ default: /* scan bus */ value = 1; /* short listing */ if (argc > 1) { - if (argv[argc-1][0] == 'l') { + if (cmd != 'r' && argv[argc-1][0] == 'l') { value = 0; argc--; } @@ -673,7 +715,10 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("No such bus\n"); return CMD_RET_FAILURE; } - pciinfo(bus, value); + if (cmd == 'r') + pci_show_regions(bus); + else + pciinfo(bus, value); #else pciinfo(busnum, value); #endif @@ -745,6 +790,8 @@ static char pci_help_text[] = #ifdef CONFIG_DM_PCI "pci bar b.d.f\n" " - show BARs base and size for device b.d.f'\n" + "pci regions\n" + " - show PCI regions\n" #endif "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n" " - display PCI configuration space (CFG)\n" diff --git a/common/board_f.c b/common/board_f.c index ff07886..d9431ee 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -146,13 +146,6 @@ static int announce_dram_init(void) return 0; } -#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K) -static int init_func_ram(void) -{ - return initdram(); -} -#endif - static int show_dram_config(void) { unsigned long long size; @@ -779,15 +772,7 @@ static const init_fnc_t init_sequence_f[] = { init_func_spi, #endif announce_dram_init, - /* TODO: unify all these dram functions? */ -#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_NDS32) || \ - defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) || \ - defined(CONFIG_SH) dram_init, /* configure available RAM banks */ -#endif -#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K) - init_func_ram, -#endif #ifdef CONFIG_POST post_init_f, #endif diff --git a/common/env_common.c b/common/env_common.c index 7fb62e8..6845f8d 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -140,7 +140,7 @@ int set_default_vars(int nvars, char * const vars[]) } #ifdef CONFIG_ENV_AES -#include <aes.h> +#include <uboot_aes.h> /** * env_aes_cbc_get_key() - Get AES-128-CBC key for the environment * diff --git a/common/env_flags.c b/common/env_flags.c index 921d377..3c50620 100644 --- a/common/env_flags.c +++ b/common/env_flags.c @@ -11,6 +11,7 @@ #ifdef USE_HOSTCC /* Eliminate "ANSI does not permit..." warnings */ #include <stdint.h> #include <stdio.h> +#include "fw_env_private.h" #include "fw_env.h" #include <env_attr.h> #include <env_flags.h> diff --git a/common/usb_storage.c b/common/usb_storage.c index b524a15..83279c4 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -1440,10 +1440,8 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, " Request Sense returned %02X %02X %02X\n", pccb->sense_buf[2], pccb->sense_buf[12], pccb->sense_buf[13]); - if (dev_desc->removable == 1) { + if (dev_desc->removable == 1) dev_desc->type = perq; - return 1; - } return 0; } pccb->pdata = (unsigned char *)cap; diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 96d76e4..2788219 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -45,6 +45,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_DM=y +CONFIG_PHYLIB=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_PCI=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig new file mode 100644 index 0000000..7369d23 --- /dev/null +++ b/configs/gwventana_gw5904_defconfig @@ -0,0 +1,68 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_GW_VENTANA=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_VIDEO=y +CONFIG_SPL_STACK_R_ADDR=0x18000000 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" +CONFIG_BOOTDELAY=3 +# CONFIG_SYS_STDIO_DEREGISTER is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_DMA_SUPPORT=y +CONFIG_SPL_OS_BOOT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Ventana > " +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_UBI=y +CONFIG_DM=y +CONFIG_PHYLIB=y +CONFIG_MV88E61XX_SWITCH=y +CONFIG_MV88E61XX_CPU_PORT=5 +CONFIG_MV88E61XX_PHY_PORTS=0xf +CONFIG_MV88E61XX_FIXED_PORTS=0x0 +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Gateworks" +CONFIG_G_DNL_VENDOR_NUM=0x0525 +CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 +# CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_OF_LIBFDT=y +CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 6cc5897..e1e5200 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -46,6 +46,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_DM=y +CONFIG_PHYLIB=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_PCI=y diff --git a/configs/imx6dl_icore_rqs_mmc_defconfig b/configs/imx6dl_icore_rqs_mmc_defconfig index f521292..64fa2ec 100644 --- a/configs/imx6dl_icore_rqs_mmc_defconfig +++ b/configs/imx6dl_icore_rqs_mmc_defconfig @@ -38,4 +38,3 @@ CONFIG_FEC_MXC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y -CONFIG_BOARD_LATE_INIT=y diff --git a/configs/imx6q_icore_rqs_mmc_defconfig b/configs/imx6q_icore_rqs_mmc_defconfig index 6bd3387..6bbdfa8 100644 --- a/configs/imx6q_icore_rqs_mmc_defconfig +++ b/configs/imx6q_icore_rqs_mmc_defconfig @@ -38,4 +38,3 @@ CONFIG_FEC_MXC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y -CONFIG_BOARD_LATE_INIT=y diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig new file mode 100644 index 0000000..503b14c --- /dev/null +++ b/configs/imx6q_logic_defconfig @@ -0,0 +1,38 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_MX6LOGICPD=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,MX6Q" +CONFIG_BOOTDELAY=3 +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="i.MX6 Logic # " +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +# CONFIG_BLK is not set +CONFIG_SYS_I2C_MXC=y +# CONFIG_DM_MMC_OPS is not set +CONFIG_NAND_MXS=y +CONFIG_FEC_MXC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR_PFUZE100=y diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index 4c3664f..94fe808 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -37,4 +37,3 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y -CONFIG_BOARD_LATE_INIT=y diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig index ea2d378..8ecdd8e 100644 --- a/configs/imx6ul_isiot_mmc_defconfig +++ b/configs/imx6ul_isiot_mmc_defconfig @@ -39,4 +39,3 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y -CONFIG_BOARD_LATE_INIT=y diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index f02a2ac..6f1a054 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -40,4 +40,3 @@ CONFIG_PINCTRL_IMX6=y CONFIG_SYS_I2C_MXC=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y -CONFIG_BOARD_LATE_INIT=y diff --git a/configs/m53evk_defconfig b/configs/m53evk_defconfig index 9e3b8af..4dff335 100644 --- a/configs/m53evk_defconfig +++ b/configs/m53evk_defconfig @@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_VIDEO=y CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/denx/m53evk/imximage.cfg" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aries/m53evk/imximage.cfg" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index 39bcaba..fcacd21 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y @@ -23,10 +24,23 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y CONFIG_DM=y +# CONFIG_BLK is not set +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_MMC_OPS is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 7c0a3a8..f9eba0c 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_MX6SLEVK=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" +CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" +CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y @@ -23,10 +25,23 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y CONFIG_DM=y +# CONFIG_BLK is not set +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_MMC_OPS is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index dcdc747..7d3de1f 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -8,7 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL,SYS_I2C" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 2cf5011..00da76e 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -14,7 +14,10 @@ CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y -# CONFIG_MMC is not set +CONFIG_MMC=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_CMD_MMC=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_PINCTRL=y diff --git a/configs/rock_defconfig b/configs/rock_defconfig index 20a065a..b61286e 100644 --- a/configs/rock_defconfig +++ b/configs/rock_defconfig @@ -40,6 +40,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_REGULATOR_ACT8846=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_RAM=y +# CONFIG_TPL_DM_SERIAL is not set CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_BASE=0x20064000 CONFIG_DEBUG_UART_CLOCK=24000000 diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 3e58495..2b95a16 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -8,11 +8,15 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_FIT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set @@ -26,10 +30,41 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=88000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 0c47883..b0466c2 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -6,7 +6,10 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_FIT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set @@ -24,10 +27,41 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=88000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index e5d2f54..57dec69 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -4,9 +4,12 @@ CONFIG_TARGET_SAMA5D4_XPLAINED=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 @@ -25,10 +28,42 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=88000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 7bf32e3..8601d56 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -8,6 +8,9 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3 @@ -15,6 +18,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set @@ -28,9 +32,42 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=88000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 6092606..a9bcabf 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -6,9 +6,13 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 +CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -26,11 +30,43 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=88000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_LCD=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index dff8995..b56fd63 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -4,13 +4,15 @@ CONFIG_TARGET_SAMA5D4EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y @@ -27,11 +29,43 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_AT91=y +CONFIG_AT91_UTMI=y +CONFIG_AT91_H32MX=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y +CONFIG_DM_MMC=y +CONFIG_GENERIC_ATMEL_MCI=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_DM_ETH=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ATMEL=y +CONFIG_DEBUG_UART_BASE=0xfc00c000 +CONFIG_DEBUG_UART_CLOCK=88000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_LCD=y -CONFIG_OF_LIBFDT=y diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index 43c51fe..5aa8e25 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk" +CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_socdk.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y @@ -64,3 +65,5 @@ CONFIG_G_DNL_MANUFACTURER="altera" CONFIG_G_DNL_VENDOR_NUM=0x0525 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 CONFIG_USE_TINY_PRINTF=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2 diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index 8b050b9..c8b8084 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socdk.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y @@ -64,3 +65,5 @@ CONFIG_G_DNL_MANUFACTURER="altera" CONFIG_G_DNL_VENDOR_NUM=0x0525 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 CONFIG_USE_TINY_PRINTF=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2 diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig index af41e1e..b122135 100644 --- a/configs/socfpga_de0_nano_soc_defconfig +++ b/configs/socfpga_de0_nano_soc_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y @@ -58,3 +59,5 @@ CONFIG_G_DNL_MANUFACTURER="terasic" CONFIG_G_DNL_VENDOR_NUM=0x0525 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 CONFIG_USE_TINY_PRINTF=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2
\ No newline at end of file diff --git a/configs/socfpga_de1_soc_defconfig b/configs/socfpga_de1_soc_defconfig index 135dfac..211ea41 100644 --- a/configs/socfpga_de1_soc_defconfig +++ b/configs/socfpga_de1_soc_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de1_soc" +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de1_soc.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index b16ee1c..627b90f 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_TARGET_SOCFPGA_DENX_MCVEVK=y +CONFIG_TARGET_SOCFPGA_ARIES_MCVEVK=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk" CONFIG_FIT=y diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig index d0c2bda..bf60783 100644 --- a/configs/socfpga_sockit_defconfig +++ b/configs/socfpga_sockit_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit" +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_sockit.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index e9276f9..4246ad6 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_EBV_SOCRATES=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socrates.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig index 981600b..ac1ed53 100644 --- a/configs/socfpga_sr1500_defconfig +++ b/configs/socfpga_sr1500_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_SR1500=y CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500" +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_sr1500.dtb" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/doc/README.mpc85xx b/doc/README.mpc85xx index f9b023f..93ed641 100644 --- a/doc/README.mpc85xx +++ b/doc/README.mpc85xx @@ -156,7 +156,7 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot Disable : 15, 14 11) Create DDR's TLB entriy - Location : Board_init_f -> init_func_ram -> initdram + Location : Board_init_f -> dram_init TLB entry : Search free TLB entry 12) Update Flash's TLB entry diff --git a/doc/README.mxs b/doc/README.mxs index 4edf19f..e23ab9c 100644 --- a/doc/README.mxs +++ b/doc/README.mxs @@ -95,7 +95,7 @@ Next, configure U-Boot for a MXS based board Examples: -1. For building U-Boot for Denx M28EVK board: +1. For building U-Boot for Aries M28EVK board: $ make m28evk_config diff --git a/doc/README.socfpga b/doc/README.socfpga index cb805cf..cae0ef1 100644 --- a/doc/README.socfpga +++ b/doc/README.socfpga @@ -1,18 +1,149 @@ - --------------------------------------------- +---------------------------------------- SOCFPGA Documentation for U-Boot and SPL --------------------------------------------- +---------------------------------------- This README is about U-Boot and SPL support for Altera's ARM Cortex-A9MPCore based SOCFPGA. To know more about the hardware itself, please refer to www.altera.com. --------------------------------------------- socfpga_dw_mmc --------------------------------------------- +-------------- + Here are macro and detailed configuration required to enable DesignWare SDMMC controller support within SOCFPGA #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 -> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM + +-------------------------------------------------- +Generating the handoff header files for U-Boot SPL +-------------------------------------------------- + +This text is assuming quartus 16.1, but newer versions will probably work just fine too; +verified with DE1_SOC_Linux_FB demo project (https://github.com/VCTLabs/DE1_SOC_Linux_FB). +Updated/working projects should build using either process below. + +Note: it *should* work from Quartus 14.0.200 onwards, however, the current vendor demo +projects must have the IP cores updated as shown below. + +Rebuilding your Quartus project +------------------------------- + +Choose one of the follwing methods, either command line or GUI. + +Using the comaand line +~~~~~~~~~~~~~~~~~~~~~~ + +First run the embedded command shell, using your path to the Quartus install: + + $ /path/to/intelFPGA/16.1/embedded/embedded_command_shell.sh + +Then (if necessary) update the IP cores in the project, generate HDL code, and +build the project: + + $ cd path/to/project/dir + $ qsys-generate soc_system.qsys --upgrade-ip-cores + $ qsys-generate soc_system.qsys --synthesis=[VERILOG|VHDL] + $ quartus_sh --flow compile <project name> + +Convert the resulting .sof file (SRAM object file) to .rbf file (Raw bit file): + + $ quartus_cpf -c <project_name>.sof soc_system.rbf + + +Generate BSP handoff files +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +You can run the bsp editor GUI below, or run the following command from the +project directory: + + $ /path/to/bsb/tools/bsp-create-settings --type spl --bsp-dir build \ + --preloader-settings-dir hps_isw_handoff/soc_system_hps_0/ \ + --settings build/settings.bsp + +You should use the bsp "build" directory above (ie, where the settings.bsp file is) +in the following u-boot command to update the board headers. Once these headers +are updated for a given project build, u-boot should be configured for the +project board (eg, de0-nano-sockit) and then build the normal spl build. + +Now you can skip the GUI section. + + +Using the Qsys GUI +~~~~~~~~~~~~~~~~~~ + +1. Navigate to your project directory +2. Run Quartus II +3. Open Project (Ctrl+J), select <project_name>.qpf +4. Run QSys [Tools->QSys] + 4.1 In the Open dialog, select '<project_name>.qsys' + 4.2 In the Open System dialog, wait until completion and press 'Close' + 4.3 In the Qsys window, click on 'Generate HDL...' in bottom right corner + 4.3.1 In the 'Generation' window, click 'Generate' + 4.3.2 In the 'Generate' dialog, wait until completion and click 'Close' + 4.4 In the QSys window, click 'Finish' + 4.4.1 In the 'Quartus II' pop up window, click 'OK' +5. Back in Quartus II main window, do the following + 5.1 Use Processing -> Start -> Start Analysis & Synthesis (Ctrl+K) + 5.2 Use Processing -> Start Compilation (Ctrl+L) + + ... this may take some time, have patience ... + +6. Start the embedded command shell as shown in the previous section + 6.1 Change directory to 'software/spl_bsp' + 6.2 Prepare BSP by launching the BSP editor from ECS + => bsp-editor + 6.3 In BSP editor + 6.3.1 Use File -> Open + 6.3.2 Select 'settings.bsp' file + 6.3.3 Click Generate + 6.3.4 Click Exit + + +Post handoff generation +~~~~~~~~~~~~~~~~~~~~~~~ + +Now that the handoff files are generated, U-Boot can be used to process +the handoff files generated by the bsp-editor. For this, please use the +following script from the u-boot source tree: + + $ ./arch/arm/mach-socfpga/qts-filter.sh \ + <soc_type> \ + <input_qts_dir> \ + <input_bsp_dir> \ + <output_dir> + +Process QTS-generated files into U-Boot compatible ones. + + soc_type - Type of SoC, either 'cyclone5' or 'arria5'. + input_qts_dir - Directory with compiled Quartus project + and containing the Quartus project file (QPF). + input_bsp_dir - Directory with generated bsp containing + the settings.bsp file. + output_dir - Directory to store the U-Boot compatible + headers. + +This will generate (or update) the following 4 files: + + iocsr_config.h + pinmux_config.h + pll_config.h + sdram_config.h + +These files should be copied into "qts" directory in the board directory +(see output argument of qts-filter.sh command above). + +Here is an example for the DE-0 Nano SoC after the above rebuild process: + + $ ll board/terasic/de0-nano-soc/qts/ + total 36 + -rw-r--r-- 1 sarnold sarnold 8826 Mar 21 18:11 iocsr_config.h + -rw-r--r-- 1 sarnold sarnold 4398 Mar 21 18:11 pinmux_config.h + -rw-r--r-- 1 sarnold sarnold 3190 Mar 21 18:11 pll_config.h + -rw-r--r-- 1 sarnold sarnold 9022 Mar 21 18:11 sdram_config.h + +Note: file sizes will differ slightly depending on the selected board. + +Now your board is ready for full mainline support including U-Boot SPL. +The Preloader will not be needed any more. diff --git a/drivers/Kconfig b/drivers/Kconfig index 0e5d97d..3e6bbac 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -14,6 +14,8 @@ source "drivers/cpu/Kconfig" source "drivers/crypto/Kconfig" +source "drivers/ddr/Kconfig" + source "drivers/demo/Kconfig" source "drivers/ddr/fsl/Kconfig" diff --git a/drivers/core/device.c b/drivers/core/device.c index e1b0ebf..09a115f 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -255,8 +255,36 @@ static void *alloc_priv(int size, uint flags) if (flags & DM_FLAG_ALLOC_PRIV_DMA) { priv = memalign(ARCH_DMA_MINALIGN, size); - if (priv) + if (priv) { memset(priv, '\0', size); + + /* + * Ensure that the zero bytes are flushed to memory. + * This prevents problems if the driver uses this as + * both an input and an output buffer: + * + * 1. Zeroes written to buffer (here) and sit in the + * cache + * 2. Driver issues a read command to DMA + * 3. CPU runs out of cache space and evicts some cache + * data in the buffer, writing zeroes to RAM from + * the memset() above + * 4. DMA completes + * 5. Buffer now has some DMA data and some zeroes + * 6. Data being read is now incorrect + * + * To prevent this, ensure that the cache is clean + * within this range at the start. The driver can then + * use normal flush-after-write, invalidate-before-read + * procedures. + * + * TODO(sjg@chromium.org): Drop this microblaze + * exception. + */ +#ifndef CONFIG_MICROBLAZE + flush_dcache_range((ulong)priv, (ulong)priv + size); +#endif + } } else { priv = calloc(1, size); } diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index d94d43a..04fb45b 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -250,7 +250,7 @@ int uclass_find_device_by_seq(enum uclass_id id, int seq_or_req_seq, return ret; list_for_each_entry(dev, &uc->dev_head, uclass_node) { - debug(" - %d %d\n", dev->req_seq, dev->seq); + debug(" - %d %d '%s'\n", dev->req_seq, dev->seq, dev->name); if ((find_req_seq ? dev->req_seq : dev->seq) == seq_or_req_seq) { *devp = dev; diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig new file mode 100644 index 0000000..b764add --- /dev/null +++ b/drivers/ddr/Kconfig @@ -0,0 +1 @@ +source "drivers/ddr/altera/Kconfig" diff --git a/drivers/ddr/altera/Kconfig b/drivers/ddr/altera/Kconfig new file mode 100644 index 0000000..021ec1d --- /dev/null +++ b/drivers/ddr/altera/Kconfig @@ -0,0 +1,5 @@ +config ALTERA_SDRAM + bool "SoCFPGA DDR SDRAM driver" + depends on TARGET_SOCFPGA_GEN5 + help + Enable DDR SDRAM controller for the SoCFPGA devices. diff --git a/drivers/ddr/altera/Makefile b/drivers/ddr/altera/Makefile index 1ca7058..bdd2872 100644 --- a/drivers/ddr/altera/Makefile +++ b/drivers/ddr/altera/Makefile @@ -8,4 +8,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ALTERA_SDRAM) += sdram.o sequencer.o +ifdef CONFIG_ALTERA_SDRAM +obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram.o sequencer.o +endif diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 9aa3eec..d0a7b3f 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -786,7 +786,7 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) print_size(total_memory, " of memory\n"); printf(" This U-Boot only supports < 4G of DDR\n"); printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); - printf(" "); /* re-align to match init_func_ram print */ + printf(" "); /* re-align to match init_dram print */ total_memory = CONFIG_MAX_MEM_MAPPED; } #endif @@ -796,7 +796,7 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) /* * fsl_ddr_sdram(void) -- this is the main function to be - * called by initdram() in the board file. + * called by dram_init() in the board file. * * It returns amount of memory configured in bytes. */ diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index dc4108f..c95e9ac 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -28,6 +28,19 @@ config DWAPB_GPIO help Support for the Designware APB GPIO driver. +config AT91_GPIO + bool "AT91 PIO GPIO driver" + depends on DM_GPIO + default n + help + Say yes here to select AT91 PIO GPIO driver. AT91 PIO + controller manages up to 32 fully programmable input/output + lines. Each I/O line may be dedicated as a general-purpose + I/O or be assigned to a function of an embedded peripheral. + The assignment to a function of an embedded peripheral is + the responsibility of AT91 Pinctrl driver. This driver is + responsible for the general-purpose I/O. + config ATMEL_PIO4 bool "ATMEL PIO4 driver" depends on DM_GPIO diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 8e52e3d..98dbd82 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -10,6 +10,7 @@ #include <config.h> #include <common.h> +#include <clk.h> #include <dm.h> #include <asm/io.h> #include <linux/sizes.h> @@ -59,11 +60,6 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) { struct at91_port *at91_port = at91_pio_get_port(port); -#if defined(CPU_HAS_PIO3) - if (use_pullup) - at91_set_pio_pulldown(port, pin, 0); -#endif - if (at91_port && (pin < GPIO_PER_BANK)) at91_set_port_pullup(at91_port, pin, use_pullup); @@ -100,14 +96,7 @@ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) mask = 1 << pin; writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); -#if defined(CPU_HAS_PIO3) - writel(readl(&at91_port->abcdsr1) & ~mask, - &at91_port->abcdsr1); - writel(readl(&at91_port->abcdsr2) & ~mask, - &at91_port->abcdsr2); -#else - writel(mask, &at91_port->asr); -#endif + writel(mask, &at91_port->mux.pio2.asr); writel(mask, &at91_port->pdr); } @@ -126,25 +115,62 @@ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) mask = 1 << pin; writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); -#if defined(CPU_HAS_PIO3) - writel(readl(&at91_port->abcdsr1) | mask, - &at91_port->abcdsr1); - writel(readl(&at91_port->abcdsr2) & ~mask, - &at91_port->abcdsr2); -#else - writel(mask, &at91_port->bsr); -#endif + writel(mask, &at91_port->mux.pio2.bsr); writel(mask, &at91_port->pdr); } return 0; } -#if defined(CPU_HAS_PIO3) +/* + * mux the pin to the "A" internal peripheral role. + */ +int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup) +{ + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; + + if (at91_port && (pin < GPIO_PER_BANK)) { + mask = 1 << pin; + writel(mask, &at91_port->idr); + at91_set_pio_pullup(port, pin, use_pullup); + writel(readl(&at91_port->mux.pio3.abcdsr1) & ~mask, + &at91_port->mux.pio3.abcdsr1); + writel(readl(&at91_port->mux.pio3.abcdsr2) & ~mask, + &at91_port->mux.pio3.abcdsr2); + + writel(mask, &at91_port->pdr); + } + + return 0; +} + +/* + * mux the pin to the "B" internal peripheral role. + */ +int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup) +{ + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; + + if (at91_port && (pin < GPIO_PER_BANK)) { + mask = 1 << pin; + writel(mask, &at91_port->idr); + at91_set_pio_pullup(port, pin, use_pullup); + writel(readl(&at91_port->mux.pio3.abcdsr1) | mask, + &at91_port->mux.pio3.abcdsr1); + writel(readl(&at91_port->mux.pio3.abcdsr2) & ~mask, + &at91_port->mux.pio3.abcdsr2); + + writel(mask, &at91_port->pdr); + } + + return 0; +} /* * mux the pin to the "C" internal peripheral role. */ -int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) +int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup) { struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; @@ -153,10 +179,10 @@ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) mask = 1 << pin; writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(readl(&at91_port->abcdsr1) & ~mask, - &at91_port->abcdsr1); - writel(readl(&at91_port->abcdsr2) | mask, - &at91_port->abcdsr2); + writel(readl(&at91_port->mux.pio3.abcdsr1) & ~mask, + &at91_port->mux.pio3.abcdsr1); + writel(readl(&at91_port->mux.pio3.abcdsr2) | mask, + &at91_port->mux.pio3.abcdsr2); writel(mask, &at91_port->pdr); } @@ -166,7 +192,7 @@ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) /* * mux the pin to the "D" internal peripheral role. */ -int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) +int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup) { struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; @@ -175,16 +201,15 @@ int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) mask = 1 << pin; writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(readl(&at91_port->abcdsr1) | mask, - &at91_port->abcdsr1); - writel(readl(&at91_port->abcdsr2) | mask, - &at91_port->abcdsr2); + writel(readl(&at91_port->mux.pio3.abcdsr1) | mask, + &at91_port->mux.pio3.abcdsr1); + writel(readl(&at91_port->mux.pio3.abcdsr2) | mask, + &at91_port->mux.pio3.abcdsr2); writel(mask, &at91_port->pdr); } return 0; } -#endif #ifdef CONFIG_DM_GPIO static bool at91_get_port_output(struct at91_port *at91_port, int offset) @@ -263,10 +288,27 @@ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) if (at91_port && (pin < GPIO_PER_BANK)) { mask = 1 << pin; + if (is_on) + writel(mask, &at91_port->ifer); + else + writel(mask, &at91_port->ifdr); + } + + return 0; +} + +/* + * enable/disable the glitch filter. mostly used with IRQ handling. + */ +int at91_pio3_set_pio_deglitch(unsigned port, unsigned pin, int is_on) +{ + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; + + if (at91_port && (pin < GPIO_PER_BANK)) { + mask = 1 << pin; if (is_on) { -#if defined(CPU_HAS_PIO3) - writel(mask, &at91_port->ifscdr); -#endif + writel(mask, &at91_port->mux.pio3.ifscdr); writel(mask, &at91_port->ifer); } else { writel(mask, &at91_port->ifdr); @@ -276,11 +318,10 @@ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) return 0; } -#if defined(CPU_HAS_PIO3) /* * enable/disable the debounce filter. */ -int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) +int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) { struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; @@ -288,8 +329,8 @@ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) if (at91_port && (pin < GPIO_PER_BANK)) { mask = 1 << pin; if (is_on) { - writel(mask, &at91_port->ifscer); - writel(div & PIO_SCDR_DIV, &at91_port->scdr); + writel(mask, &at91_port->mux.pio3.ifscer); + writel(div & PIO_SCDR_DIV, &at91_port->mux.pio3.scdr); writel(mask, &at91_port->ifer); } else { writel(mask, &at91_port->ifdr); @@ -303,7 +344,7 @@ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) * enable/disable the pull-down. * If pull-up already enabled while calling the function, we disable it. */ -int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) +int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on) { struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; @@ -312,18 +353,31 @@ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) mask = 1 << pin; if (is_on) { at91_set_pio_pullup(port, pin, 0); - writel(mask, &at91_port->ppder); + writel(mask, &at91_port->mux.pio3.ppder); } else - writel(mask, &at91_port->ppddr); + writel(mask, &at91_port->mux.pio3.ppddr); } return 0; } +int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) +{ + struct at91_port *at91_port = at91_pio_get_port(port); + + if (use_pullup) + at91_pio3_set_pio_pulldown(port, pin, 0); + + if (at91_port && (pin < GPIO_PER_BANK)) + at91_set_port_pullup(at91_port, pin, use_pullup); + + return 0; +} + /* * disable Schmitt trigger */ -int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) +int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) { struct at91_port *at91_port = at91_pio_get_port(port); u32 mask; @@ -336,7 +390,6 @@ int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) return 0; } -#endif /* * enable/disable the multi-driver. This is only valid for output and @@ -517,17 +570,44 @@ static int at91_gpio_probe(struct udevice *dev) struct at91_port_priv *port = dev_get_priv(dev); struct at91_port_platdata *plat = dev_get_platdata(dev); struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct clk clk; + int ret; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) + return ret; + + ret = clk_enable(&clk); + if (ret) + return ret; + + clk_free(&clk); uc_priv->bank_name = plat->bank_name; uc_priv->gpio_count = GPIO_PER_BANK; + +#if CONFIG_IS_ENABLED(OF_CONTROL) + plat->base_addr = (uint32_t)dev_get_addr_ptr(dev); +#endif port->regs = (struct at91_port *)plat->base_addr; return 0; } +#if CONFIG_IS_ENABLED(OF_CONTROL) +static const struct udevice_id at91_gpio_ids[] = { + { .compatible = "atmel,at91rm9200-gpio" }, + { } +}; +#endif + U_BOOT_DRIVER(gpio_at91) = { .name = "gpio_at91", .id = UCLASS_GPIO, +#if CONFIG_IS_ENABLED(OF_CONTROL) + .of_match = at91_gpio_ids, + .platdata_auto_alloc_size = sizeof(struct at91_port_platdata), +#endif .ops = &gpio_at91_ops, .probe = at91_gpio_probe, .priv_auto_alloc_size = sizeof(struct at91_port_priv), diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 560391f..6ac26dd 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -105,6 +105,12 @@ config MMC_DW_SOCFPGA Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on Altera SOCFPGA. +config MMC_MESON_GX + bool "Meson GX EMMC controller support" + depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_MESON + help + Support for EMMC host controller on Meson GX ARM SoCs platform (S905) + config MMC_MXC bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" help @@ -365,6 +371,15 @@ config MMC_SUNXI This selects support for the SD/MMC Host Controller on Allwinner sunxi SoCs. +config GENERIC_ATMEL_MCI + bool "Atmel Multimedia Card Interface support" + depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 + help + This enables support for Atmel High Speed Multimedia Card Interface + (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, + the SD Memory Card Specification V2.0, the SDIO V2.0 specification + and CE-ATA V1.1. + endif config TEGRA124_MMC_DISABLE_EXT_LOOPBACK diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 6a26a52..a61a9e9 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -29,6 +29,7 @@ ifdef CONFIG_SUPPORT_EMMC_BOOT obj-$(CONFIG_GENERIC_MMC) += mmc_boot.o endif obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o +obj-$(CONFIG_MMC_MESON_GX) += meson_gx_mmc.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 29c2a85..20079bc 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -44,6 +44,7 @@ /* 400KHz is max freq for card ID etc. Use that as min */ #define MIN_FREQ 400000 +#define SDHCI_BUFFER 0x20 struct bcm2835_sdhci_host { struct sdhci_host host; @@ -69,8 +70,11 @@ static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val, * (Which is just as well - otherwise we'd have to nobble the DMA engine * too) */ - while (timer_get_us() - bcm_host->last_write < bcm_host->twoticks_delay) - ; + if (reg != SDHCI_BUFFER) { + while (timer_get_us() - bcm_host->last_write < + bcm_host->twoticks_delay) + ; + } writel(val, host->ioaddr + reg); bcm_host->last_write = timer_get_us(); diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 7dc4a5d..c25d9ed 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -10,6 +10,7 @@ */ #include <common.h> +#include <clk.h> #include <mmc.h> #include <part.h> #include <malloc.h> @@ -18,8 +19,11 @@ #include <asm/byteorder.h> #include <asm/arch/clk.h> #include <asm/arch/hardware.h> +#include <dm/device.h> #include "atmel_mci.h" +DECLARE_GLOBAL_DATA_PTR; + #ifndef CONFIG_SYS_MMC_CLK_OD # define CONFIG_SYS_MMC_CLK_OD 150000 #endif @@ -37,6 +41,10 @@ struct atmel_mci_priv { struct atmel_mci *mci; unsigned int initialized:1; unsigned int curr_clk; +#ifdef CONFIG_DM_MMC + struct mmc mmc; + ulong bus_clk_rate; +#endif }; /* Read Atmel MCI IP version */ @@ -58,11 +66,19 @@ static void dump_cmd(u32 cmdr, u32 arg, u32 status, const char* msg) } /* Setup for MCI Clock and Block Size */ +#ifdef CONFIG_DM_MMC +static void mci_set_mode(struct atmel_mci_priv *priv, u32 hz, u32 blklen) +{ + struct mmc *mmc = &priv->mmc; + u32 bus_hz = priv->bus_clk_rate; +#else static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) { struct atmel_mci_priv *priv = mmc->priv; - atmel_mci_t *mci = priv->mci; u32 bus_hz = get_mci_clk_rate(); +#endif + + atmel_mci_t *mci = priv->mci; u32 clkdiv = 255; unsigned int version = atmel_mci_get_version(mci); u32 clkodd = 0; @@ -202,10 +218,18 @@ io_fail: * Sends a command out on the bus and deals with the block data. * Takes the mmc pointer, a command pointer, and an optional data pointer. */ +#ifdef CONFIG_DM_MMC +static int atmel_mci_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); +#else static int mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct atmel_mci_priv *priv = mmc->priv; +#endif atmel_mci_t *mci = priv->mci; u32 cmdr; u32 error_flags = 0; @@ -335,17 +359,28 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) return 0; } +#ifdef CONFIG_DM_MMC +static int atmel_mci_set_ios(struct udevice *dev) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); +#else /* Entered into mmc structure during driver init */ static int mci_set_ios(struct mmc *mmc) { struct atmel_mci_priv *priv = mmc->priv; +#endif atmel_mci_t *mci = priv->mci; int bus_width = mmc->bus_width; unsigned int version = atmel_mci_get_version(mci); int busw; /* Set the clock speed */ +#ifdef CONFIG_DM_MMC + mci_set_mode(priv, mmc->clock, MMC_DEFAULT_BLKLEN); +#else mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN); +#endif /* * set the bus width and select slot for this interface @@ -374,10 +409,15 @@ static int mci_set_ios(struct mmc *mmc) return 0; } +#ifdef CONFIG_DM_MMC +static int atmel_mci_hw_init(struct atmel_mci_priv *priv) +{ +#else /* Entered into mmc structure during driver init */ static int mci_init(struct mmc *mmc) { struct atmel_mci_priv *priv = mmc->priv; +#endif atmel_mci_t *mci = priv->mci; /* Initialize controller */ @@ -392,11 +432,16 @@ static int mci_init(struct mmc *mmc) writel(~0UL, &mci->idr); /* Set default clocks and blocklen */ +#ifdef CONFIG_DM_MMC + mci_set_mode(priv, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); +#else mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); +#endif return 0; } +#ifndef CONFIG_DM_MMC static const struct mmc_ops atmel_mci_ops = { .send_cmd = mci_send_cmd, .set_ios = mci_set_ios, @@ -456,3 +501,114 @@ int atmel_mci_init(void *regs) return 0; } +#endif + +#ifdef CONFIG_DM_MMC +static const struct dm_mmc_ops atmel_mci_mmc_ops = { + .send_cmd = atmel_mci_send_cmd, + .set_ios = atmel_mci_set_ios, +}; + +static void atmel_mci_setup_cfg(struct atmel_mci_priv *priv) +{ + struct mmc_config *cfg; + u32 version; + + cfg = &priv->cfg; + cfg->name = "Atmel mci"; + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + + /* + * If the version is above 3.0, the capabilities of the 8-bit + * bus width and high speed are supported. + */ + version = atmel_mci_get_version(priv->mci); + if ((version & 0xf00) >= 0x300) { + cfg->host_caps = MMC_MODE_8BIT | + MMC_MODE_HS | MMC_MODE_HS_52MHz; + } + + cfg->host_caps |= MMC_MODE_4BIT; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + cfg->f_min = priv->bus_clk_rate / (2 * 256); + cfg->f_max = priv->bus_clk_rate / 2; +} + +static int atmel_mci_enable_clk(struct udevice *dev) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct clk clk; + ulong clk_rate; + int ret = 0; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) { + ret = -EINVAL; + goto failed; + } + + ret = clk_enable(&clk); + if (ret) + goto failed; + + clk_rate = clk_get_rate(&clk); + if (!clk_rate) { + ret = -EINVAL; + goto failed; + } + + priv->bus_clk_rate = clk_rate; + +failed: + clk_free(&clk); + + return ret; +} + +static int atmel_mci_probe(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct atmel_mci_priv *priv = dev_get_priv(dev); + struct mmc *mmc; + int ret; + + ret = atmel_mci_enable_clk(dev); + if (ret) + return ret; + + priv->mci = (struct atmel_mci *)dev_get_addr_ptr(dev); + + atmel_mci_setup_cfg(priv); + + mmc = &priv->mmc; + mmc->cfg = &priv->cfg; + mmc->dev = dev; + upriv->mmc = mmc; + + atmel_mci_hw_init(priv); + + return 0; +} + +static int atmel_mci_bind(struct udevice *dev) +{ + struct atmel_mci_priv *priv = dev_get_priv(dev); + + return mmc_bind(dev, &priv->mmc, &priv->cfg); +} + +static const struct udevice_id atmel_mci_ids[] = { + { .compatible = "atmel,hsmci" }, + { } +}; + +U_BOOT_DRIVER(atmel_mci) = { + .name = "atmel-mci", + .id = UCLASS_MMC, + .of_match = atmel_mci_ids, + .bind = atmel_mci_bind, + .probe = atmel_mci_probe, + .priv_auto_alloc_size = sizeof(struct atmel_mci_priv), + .ops = &atmel_mci_mmc_ops, +}; +#endif diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c new file mode 100644 index 0000000..8e28ab7 --- /dev/null +++ b/drivers/mmc/meson_gx_mmc.c @@ -0,0 +1,291 @@ +/* + * (C) Copyright 2016 Carlo Caione <carlo@caione.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <malloc.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/arch/sd_emmc.h> +#include <dm/device.h> +#include <linux/log2.h> + +static inline void *get_regbase(const struct mmc *mmc) +{ + struct meson_mmc_platdata *pdata = mmc->priv; + + return pdata->regbase; +} + +static inline uint32_t meson_read(struct mmc *mmc, int offset) +{ + return readl(get_regbase(mmc) + offset); +} + +static inline void meson_write(struct mmc *mmc, uint32_t val, int offset) +{ + writel(val, get_regbase(mmc) + offset); +} + +static void meson_mmc_config_clock(struct mmc *mmc) +{ + uint32_t meson_mmc_clk = 0; + unsigned int clk, clk_src, clk_div; + + /* 1GHz / CLK_MAX_DIV = 15,9 MHz */ + if (mmc->clock > 16000000) { + clk = SD_EMMC_CLKSRC_DIV2; + clk_src = CLK_SRC_DIV2; + } else { + clk = SD_EMMC_CLKSRC_24M; + clk_src = CLK_SRC_24M; + } + clk_div = DIV_ROUND_UP(clk, mmc->clock); + + /* 180 phase core clock */ + meson_mmc_clk |= CLK_CO_PHASE_180; + + /* 180 phase tx clock */ + meson_mmc_clk |= CLK_TX_PHASE_000; + + /* clock settings */ + meson_mmc_clk |= clk_src; + meson_mmc_clk |= clk_div; + + meson_write(mmc, meson_mmc_clk, MESON_SD_EMMC_CLOCK); +} + +static int meson_dm_mmc_set_ios(struct udevice *dev) +{ + struct mmc *mmc = mmc_get_mmc_dev(dev); + uint32_t meson_mmc_cfg; + + meson_mmc_config_clock(mmc); + + meson_mmc_cfg = meson_read(mmc, MESON_SD_EMMC_CFG); + + meson_mmc_cfg &= ~CFG_BUS_WIDTH_MASK; + if (mmc->bus_width == 1) + meson_mmc_cfg |= CFG_BUS_WIDTH_1; + else if (mmc->bus_width == 4) + meson_mmc_cfg |= CFG_BUS_WIDTH_4; + else if (mmc->bus_width == 8) + meson_mmc_cfg |= CFG_BUS_WIDTH_8; + else + return -EINVAL; + + /* 512 bytes block length */ + meson_mmc_cfg &= ~CFG_BL_LEN_MASK; + meson_mmc_cfg |= CFG_BL_LEN_512; + + /* Response timeout 256 clk */ + meson_mmc_cfg &= ~CFG_RESP_TIMEOUT_MASK; + meson_mmc_cfg |= CFG_RESP_TIMEOUT_256; + + /* Command-command gap 16 clk */ + meson_mmc_cfg &= ~CFG_RC_CC_MASK; + meson_mmc_cfg |= CFG_RC_CC_16; + + meson_write(mmc, meson_mmc_cfg, MESON_SD_EMMC_CFG); + + return 0; +} + +static void meson_mmc_setup_cmd(struct mmc *mmc, struct mmc_data *data, + struct mmc_cmd *cmd) +{ + uint32_t meson_mmc_cmd = 0, cfg; + + meson_mmc_cmd |= cmd->cmdidx << CMD_CFG_CMD_INDEX_SHIFT; + + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (cmd->resp_type & MMC_RSP_136) + meson_mmc_cmd |= CMD_CFG_RESP_128; + + if (cmd->resp_type & MMC_RSP_BUSY) + meson_mmc_cmd |= CMD_CFG_R1B; + + if (!(cmd->resp_type & MMC_RSP_CRC)) + meson_mmc_cmd |= CMD_CFG_RESP_NOCRC; + } else { + meson_mmc_cmd |= CMD_CFG_NO_RESP; + } + + if (data) { + cfg = meson_read(mmc, MESON_SD_EMMC_CFG); + cfg &= ~CFG_BL_LEN_MASK; + cfg |= ilog2(data->blocksize) << CFG_BL_LEN_SHIFT; + meson_write(mmc, cfg, MESON_SD_EMMC_CFG); + + if (data->flags == MMC_DATA_WRITE) + meson_mmc_cmd |= CMD_CFG_DATA_WR; + + meson_mmc_cmd |= CMD_CFG_DATA_IO | CMD_CFG_BLOCK_MODE | + data->blocks; + } + + meson_mmc_cmd |= CMD_CFG_TIMEOUT_4S | CMD_CFG_OWNER | + CMD_CFG_END_OF_CHAIN; + + meson_write(mmc, meson_mmc_cmd, MESON_SD_EMMC_CMD_CFG); +} + +static void meson_mmc_setup_addr(struct mmc *mmc, struct mmc_data *data) +{ + struct meson_mmc_platdata *pdata = mmc->priv; + unsigned int data_size; + uint32_t data_addr = 0; + + if (data) { + data_size = data->blocks * data->blocksize; + + if (data->flags == MMC_DATA_READ) { + data_addr = (ulong) data->dest; + invalidate_dcache_range(data_addr, + data_addr + data_size); + } else { + pdata->w_buf = calloc(data_size, sizeof(char)); + data_addr = (ulong) pdata->w_buf; + memcpy(pdata->w_buf, data->src, data_size); + flush_dcache_range(data_addr, data_addr + data_size); + } + } + + meson_write(mmc, data_addr, MESON_SD_EMMC_CMD_DAT); +} + +static void meson_mmc_read_response(struct mmc *mmc, struct mmc_cmd *cmd) +{ + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP3); + cmd->response[1] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP2); + cmd->response[2] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP1); + cmd->response[3] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP); + } else { + cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP); + } +} + +static int meson_dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct mmc *mmc = mmc_get_mmc_dev(dev); + struct meson_mmc_platdata *pdata = mmc->priv; + uint32_t status; + ulong start; + int ret = 0; + + /* max block size supported by chip is 512 byte */ + if (data && data->blocksize > 512) + return -EINVAL; + + meson_mmc_setup_cmd(mmc, data, cmd); + meson_mmc_setup_addr(mmc, data); + + meson_write(mmc, cmd->cmdarg, MESON_SD_EMMC_CMD_ARG); + + /* use 10s timeout */ + start = get_timer(0); + do { + status = meson_read(mmc, MESON_SD_EMMC_STATUS); + } while(!(status & STATUS_END_OF_CHAIN) && get_timer(start) < 10000); + + if (!(status & STATUS_END_OF_CHAIN)) + ret = -ETIMEDOUT; + else if (status & STATUS_RESP_TIMEOUT) + ret = -ETIMEDOUT; + else if (status & STATUS_ERR_MASK) + ret = -EIO; + + meson_mmc_read_response(mmc, cmd); + + if (data && data->flags == MMC_DATA_WRITE) + free(pdata->w_buf); + + /* reset status bits */ + meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS); + + return ret; +} + +static const struct dm_mmc_ops meson_dm_mmc_ops = { + .send_cmd = meson_dm_mmc_send_cmd, + .set_ios = meson_dm_mmc_set_ios, +}; + +static int meson_mmc_ofdata_to_platdata(struct udevice *dev) +{ + struct meson_mmc_platdata *pdata = dev_get_platdata(dev); + fdt_addr_t addr; + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + pdata->regbase = (void *)addr; + + return 0; +} + +static int meson_mmc_probe(struct udevice *dev) +{ + struct meson_mmc_platdata *pdata = dev_get_platdata(dev); + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct mmc *mmc = &pdata->mmc; + struct mmc_config *cfg = &pdata->cfg; + uint32_t val; + + cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 | + MMC_VDD_31_32 | MMC_VDD_165_195; + cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT | + MMC_MODE_HS_52MHz | MMC_MODE_HS; + cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV); + cfg->f_max = 100000000; /* 100 MHz */ + cfg->b_max = 256; /* max 256 blocks */ + cfg->name = dev->name; + + mmc->priv = pdata; + upriv->mmc = mmc; + + mmc_set_clock(mmc, cfg->f_min); + + /* reset all status bits */ + meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS); + + /* disable interrupts */ + meson_write(mmc, 0, MESON_SD_EMMC_IRQ_EN); + + /* enable auto clock mode */ + val = meson_read(mmc, MESON_SD_EMMC_CFG); + val &= ~CFG_SDCLK_ALWAYS_ON; + val |= CFG_AUTO_CLK; + meson_write(mmc, val, MESON_SD_EMMC_CFG); + + return 0; +} + +int meson_mmc_bind(struct udevice *dev) +{ + struct meson_mmc_platdata *pdata = dev_get_platdata(dev); + + return mmc_bind(dev, &pdata->mmc, &pdata->cfg); +} + +static const struct udevice_id meson_mmc_match[] = { + { .compatible = "amlogic,meson-gx-mmc" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(meson_mmc) = { + .name = "meson_gx_mmc", + .id = UCLASS_MMC, + .of_match = meson_mmc_match, + .ops = &meson_dm_mmc_ops, + .probe = meson_mmc_probe, + .bind = meson_mmc_bind, + .ofdata_to_platdata = meson_mmc_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct meson_mmc_platdata), +}; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index c94d58d..b745977 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -72,6 +72,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, unsigned int start_addr) { unsigned int stat, rdy, mask, timeout, block = 0; + bool transfer_done = false; #ifdef CONFIG_MMC_SDHCI_SDMA unsigned char ctrl; ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); @@ -89,17 +90,23 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, __func__, stat); return -EIO; } - if (stat & rdy) { + if (!transfer_done && (stat & rdy)) { if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)) continue; sdhci_writel(host, rdy, SDHCI_INT_STATUS); sdhci_transfer_pio(host, data); data->dest += data->blocksize; - if (++block >= data->blocks) - break; + if (++block >= data->blocks) { + /* Keep looping until the SDHCI_INT_DATA_END is + * cleared, even if we finished sending all the + * blocks. + */ + transfer_done = true; + continue; + } } #ifdef CONFIG_MMC_SDHCI_SDMA - if (stat & SDHCI_INT_DMA_END) { + if (!transfer_done && (stat & SDHCI_INT_DMA_END)) { sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS); start_addr &= ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1); start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 8669432..21d5d0e 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1222,7 +1222,8 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE; #ifdef CONFIG_SYS_NAND_ENABLE_PIN - gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE)); + at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN, + !(ctrl & NAND_NCE)); #endif this->IO_ADDR_W = (void *) IO_ADDR_W; } @@ -1234,7 +1235,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, #ifdef CONFIG_SYS_NAND_READY_PIN static int at91_nand_ready(struct mtd_info *mtd) { - return gpio_get_value(CONFIG_SYS_NAND_READY_PIN); + return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN); } #endif diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c index be3d82e..eb8d2b3 100644 --- a/drivers/net/at91_emac.c +++ b/drivers/net/at91_emac.c @@ -333,7 +333,7 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) ATMEL_PMX_AA_ETXEN | ATMEL_PMX_AA_EREFCK; writel(value, &pio->pioa.pdr); - writel(value, &pio->pioa.asr); + writel(value, &pio->pioa.mux.pio2.asr); #ifdef CONFIG_RMII value = ATMEL_PMX_BA_ERXCK; @@ -344,7 +344,7 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) ATMEL_PMX_BA_ETX3 | ATMEL_PMX_BA_ETX2; #endif writel(value, &pio->piob.pdr); - writel(value, &pio->piob.bsr); + writel(value, &pio->piob.mux.pio2.bsr); at91_periph_clk_enable(ATMEL_ID_EMAC); diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index e562a8a..aca3990 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -15,6 +15,19 @@ if PHYLIB config MV88E61XX_SWITCH bool "Marvel MV88E61xx Ethernet switch PHY support." +if MV88E61XX_SWITCH + +config MV88E61XX_CPU_PORT + int "CPU Port" + +config MV88E61XX_PHY_PORTS + hex "Bitmask of PHY Ports" + +config MV88E61XX_FIXED_PORTS + hex "Bitmask of PHYless serdes Ports" + +endif # MV88E61XX_SWITCH + config PHYLIB_10G bool "Generic 10G PHY support" diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 9d0f501..355aeae 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -150,6 +150,20 @@ config ROCKCHIP_RK3288_PINCTRL definitions and pin control functions for each available multiplex function. +config PINCTRL_AT91 + bool "AT91 pinctrl driver" + depends on DM + help + This option is to enable the AT91 pinctrl driver for AT91 PIO + controller. AT91 PIO controller is a combined gpio-controller, + pin-mux and pin-config module. Each I/O pin may be dedicated as + a general-purpose I/O or be assigned to a function of an embedded + peripheral. Each I/O pin has a glitch filter providing rejection of + glitches lower than one-half of peripheral clock cycle and + a debouncing filter providing rejection of unwanted pulses from key + or push button operations. You can also control the multi-driver + capability, pull-up and pull-down feature on each I/O pin. + config PINCTRL_AT91PIO4 bool "AT91 PIO4 pinctrl driver" depends on DM diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 2ac9c19..bbb2480 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -5,6 +5,7 @@ obj-y += pinctrl-uclass.o obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o +obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o obj-y += nxp/ obj-$(CONFIG_ARCH_ATH79) += ath79/ diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c new file mode 100644 index 0000000..904e1bd --- /dev/null +++ b/drivers/pinctrl/pinctrl-at91.c @@ -0,0 +1,453 @@ +/* + * Atmel PIO pinctrl driver + * + * Copyright (C) 2016 Atmel Corporation + * Wenyou.Yang <wenyou.yang@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm/device.h> +#include <dm/pinctrl.h> +#include <linux/io.h> +#include <linux/err.h> +#include <mach/at91_pio.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define MAX_GPIO_BANKS 5 +#define MAX_NB_GPIO_PER_BANK 32 + +#define MAX_PINMUX_ENTRIES 200 + +struct at91_pinctrl_priv { + struct at91_port *reg_base[MAX_GPIO_BANKS]; + u32 nbanks; +}; + +#define PULL_UP BIT(0) +#define MULTI_DRIVE BIT(1) +#define DEGLITCH BIT(2) +#define PULL_DOWN BIT(3) +#define DIS_SCHMIT BIT(4) +#define DRIVE_STRENGTH_SHIFT 5 +#define DRIVE_STRENGTH_MASK 0x3 +#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT) +#define OUTPUT BIT(7) +#define OUTPUT_VAL_SHIFT 8 +#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT) +#define DEBOUNCE BIT(16) +#define DEBOUNCE_VAL_SHIFT 17 +#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT) + +/** + * These defines will translated the dt binding settings to our internal + * settings. They are not necessarily the same value as the register setting. + * The actual drive strength current of low, medium and high must be looked up + * from the corresponding device datasheet. This value is different for pins + * that are even in the same banks. It is also dependent on VCC. + * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive + * strength when there is no dt config for it. + */ +#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT) +#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT) +#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT) +#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT) + +enum at91_mux { + AT91_MUX_GPIO = 0, + AT91_MUX_PERIPH_A = 1, + AT91_MUX_PERIPH_B = 2, + AT91_MUX_PERIPH_C = 3, + AT91_MUX_PERIPH_D = 4, +}; + +/** + * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group + * on new IP with support for periph C and D the way to mux in + * periph A and B has changed + * So provide the right callbacks + * if not present means the IP does not support it + * @mux_A_periph: assign the corresponding pin to the peripheral A function. + * @mux_B_periph: assign the corresponding pin to the peripheral B function. + * @mux_C_periph: assign the corresponding pin to the peripheral C function. + * @mux_D_periph: assign the corresponding pin to the peripheral D function. + * @set_deglitch: enable/disable the deglitch feature. + * @set_debounce: enable/disable the debounce feature. + * @set_pulldown: enable/disable the pulldown feature. + * @disable_schmitt_trig: disable schmitt trigger + */ +struct at91_pinctrl_mux_ops { + void (*mux_A_periph)(struct at91_port *pio, u32 mask); + void (*mux_B_periph)(struct at91_port *pio, u32 mask); + void (*mux_C_periph)(struct at91_port *pio, u32 mask); + void (*mux_D_periph)(struct at91_port *pio, u32 mask); + void (*set_deglitch)(struct at91_port *pio, u32 mask, bool is_on); + void (*set_debounce)(struct at91_port *pio, u32 mask, bool is_on, + u32 div); + void (*set_pulldown)(struct at91_port *pio, u32 mask, bool is_on); + void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask); + void (*set_drivestrength)(struct at91_port *pio, u32 pin, + u32 strength); +}; + +static u32 two_bit_pin_value_shift_amount(u32 pin) +{ + /* return the shift value for a pin for "two bit" per pin registers, + * i.e. drive strength */ + return 2 * ((pin >= MAX_NB_GPIO_PER_BANK/2) + ? pin - MAX_NB_GPIO_PER_BANK/2 : pin); +} + +static void at91_mux_disable_interrupt(struct at91_port *pio, u32 mask) +{ + writel(mask, &pio->idr); +} + +static void at91_mux_set_pullup(struct at91_port *pio, u32 mask, bool on) +{ + if (on) + writel(mask, &pio->mux.pio3.ppddr); + + writel(mask, (on ? &pio->puer : &pio->pudr)); +} + +static void at91_mux_set_output(struct at91_port *pio, unsigned mask, + bool is_on, bool val) +{ + writel(mask, (val ? &pio->sodr : &pio->codr)); + writel(mask, (is_on ? &pio->oer : &pio->odr)); +} + +static void at91_mux_set_multidrive(struct at91_port *pio, u32 mask, bool on) +{ + writel(mask, (on ? &pio->mder : &pio->mddr)); +} + +static void at91_mux_set_A_periph(struct at91_port *pio, u32 mask) +{ + writel(mask, &pio->mux.pio2.asr); +} + +static void at91_mux_set_B_periph(struct at91_port *pio, u32 mask) +{ + writel(mask, &pio->mux.pio2.bsr); +} + +static void at91_mux_pio3_set_A_periph(struct at91_port *pio, u32 mask) +{ + writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1); + writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2); +} + +static void at91_mux_pio3_set_B_periph(struct at91_port *pio, u32 mask) +{ + writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1); + writel(readl(&pio->mux.pio3.abcdsr2) & ~mask, &pio->mux.pio3.abcdsr2); +} + +static void at91_mux_pio3_set_C_periph(struct at91_port *pio, u32 mask) +{ + writel(readl(&pio->mux.pio3.abcdsr1) & ~mask, &pio->mux.pio3.abcdsr1); + writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2); +} + +static void at91_mux_pio3_set_D_periph(struct at91_port *pio, u32 mask) +{ + writel(readl(&pio->mux.pio3.abcdsr1) | mask, &pio->mux.pio3.abcdsr1); + writel(readl(&pio->mux.pio3.abcdsr2) | mask, &pio->mux.pio3.abcdsr2); +} + +static void at91_mux_set_deglitch(struct at91_port *pio, u32 mask, bool is_on) +{ + writel(mask, (is_on ? &pio->ifer : &pio->ifdr)); +} + +static void at91_mux_pio3_set_deglitch(struct at91_port *pio, + u32 mask, bool is_on) +{ + if (is_on) + writel(mask, &pio->mux.pio3.ifscdr); + at91_mux_set_deglitch(pio, mask, is_on); +} + +static void at91_mux_pio3_set_debounce(struct at91_port *pio, u32 mask, + bool is_on, u32 div) +{ + if (is_on) { + writel(mask, &pio->mux.pio3.ifscer); + writel(div & PIO_SCDR_DIV, &pio->mux.pio3.scdr); + writel(mask, &pio->ifer); + } else { + writel(mask, &pio->mux.pio3.ifscdr); + } +} + +static void at91_mux_pio3_set_pulldown(struct at91_port *pio, + u32 mask, bool is_on) +{ + if (is_on) + writel(mask, &pio->pudr); + + writel(mask, (is_on ? &pio->mux.pio3.ppder : &pio->mux.pio3.ppddr)); +} + +static void at91_mux_pio3_disable_schmitt_trig(struct at91_port *pio, + u32 mask) +{ + writel(readl(&pio->schmitt) | mask, &pio->schmitt); +} + +static void set_drive_strength(void *reg, u32 pin, u32 strength) +{ + u32 shift = two_bit_pin_value_shift_amount(pin); + + clrsetbits_le32(reg, DRIVE_STRENGTH_MASK << shift, strength << shift); +} + +static void at91_mux_sama5d3_set_drivestrength(struct at91_port *pio, + u32 pin, u32 setting) +{ + void *reg; + + reg = &pio->driver12; + if (pin >= MAX_NB_GPIO_PER_BANK / 2) + reg = &pio->driver2; + + /* do nothing if setting is zero */ + if (!setting) + return; + + /* strength is 1 to 1 with setting for SAMA5 */ + set_drive_strength(reg, pin, setting); +} + +static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio, + u32 pin, u32 setting) +{ + void *reg; + + reg = &pio->driver1; + if (pin >= MAX_NB_GPIO_PER_BANK / 2) + reg = &pio->driver12; + + /* do nothing if setting is zero */ + if (!setting) + return; + + /* strength is inverse on SAM9x5s with our defines + * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ + setting = DRIVE_STRENGTH_HI - setting; + + set_drive_strength(reg, pin, setting); +} + +static struct at91_pinctrl_mux_ops at91rm9200_ops = { + .mux_A_periph = at91_mux_set_A_periph, + .mux_B_periph = at91_mux_set_B_periph, + .set_deglitch = at91_mux_set_deglitch, +}; + +static struct at91_pinctrl_mux_ops at91sam9x5_ops = { + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .set_deglitch = at91_mux_pio3_set_deglitch, + .set_debounce = at91_mux_pio3_set_debounce, + .set_pulldown = at91_mux_pio3_set_pulldown, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .set_drivestrength = at91_mux_sam9x5_set_drivestrength, +}; + +static struct at91_pinctrl_mux_ops sama5d3_ops = { + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .set_deglitch = at91_mux_pio3_set_deglitch, + .set_debounce = at91_mux_pio3_set_debounce, + .set_pulldown = at91_mux_pio3_set_pulldown, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .set_drivestrength = at91_mux_sama5d3_set_drivestrength, +}; + +static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask) +{ + writel(mask, &pio->pdr); +} + +static void at91_mux_gpio_enable(struct at91_port *pio, u32 mask, bool input) +{ + writel(mask, &pio->per); + writel(mask, (input ? &pio->odr : &pio->oer)); +} + +static int at91_pmx_set(struct at91_pinctrl_mux_ops *ops, + struct at91_port *pio, u32 mask, enum at91_mux mux) +{ + at91_mux_disable_interrupt(pio, mask); + switch (mux) { + case AT91_MUX_GPIO: + at91_mux_gpio_enable(pio, mask, 1); + break; + case AT91_MUX_PERIPH_A: + ops->mux_A_periph(pio, mask); + break; + case AT91_MUX_PERIPH_B: + ops->mux_B_periph(pio, mask); + break; + case AT91_MUX_PERIPH_C: + if (!ops->mux_C_periph) + return -EINVAL; + ops->mux_C_periph(pio, mask); + break; + case AT91_MUX_PERIPH_D: + if (!ops->mux_D_periph) + return -EINVAL; + ops->mux_D_periph(pio, mask); + break; + } + if (mux) + at91_mux_gpio_disable(pio, mask); + + return 0; +} + +static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops, + struct at91_port *pio, u32 pin, u32 config) +{ + u32 mask = BIT(pin); + + if ((config & PULL_UP) && (config & PULL_DOWN)) + return -EINVAL; + + at91_mux_set_output(pio, mask, config & OUTPUT, + (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT); + at91_mux_set_pullup(pio, mask, config & PULL_UP); + at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); + if (ops->set_deglitch) + ops->set_deglitch(pio, mask, config & DEGLITCH); + if (ops->set_debounce) + ops->set_debounce(pio, mask, config & DEBOUNCE, + (config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT); + if (ops->set_pulldown) + ops->set_pulldown(pio, mask, config & PULL_DOWN); + if (ops->disable_schmitt_trig && config & DIS_SCHMIT) + ops->disable_schmitt_trig(pio, mask); + if (ops->set_drivestrength) + ops->set_drivestrength(pio, pin, + (config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT); + + return 0; +} + +static int at91_pin_check_config(struct udevice *dev, u32 bank, u32 pin) +{ + struct at91_pinctrl_priv *priv = dev_get_priv(dev); + + if (bank >= priv->nbanks) { + debug("pin conf bank %d >= nbanks %d\n", bank, priv->nbanks); + return -EINVAL; + } + + if (pin >= MAX_NB_GPIO_PER_BANK) { + debug("pin conf pin %d >= %d\n", pin, MAX_NB_GPIO_PER_BANK); + return -EINVAL; + } + + return 0; +} + +static int at91_pinctrl_set_state(struct udevice *dev, struct udevice *config) +{ + struct at91_pinctrl_priv *priv = dev_get_priv(dev); + const void *blob = gd->fdt_blob; + int node = config->of_offset; + u32 cells[MAX_PINMUX_ENTRIES]; + const u32 *list = cells; + u32 bank, pin; + u32 conf, mask, count, i; + int size; + int ret; + enum at91_mux mux; + struct at91_port *pio; + struct at91_pinctrl_mux_ops *ops = + (struct at91_pinctrl_mux_ops *)dev_get_driver_data(dev); + + /* + * the binding format is atmel,pins = <bank pin mux CONFIG ...>, + * do sanity check and calculate pins number + */ + size = fdtdec_get_int_array_count(blob, node, "atmel,pins", + cells, ARRAY_SIZE(cells)); + + /* we do not check return since it's safe node passed down */ + count = size >> 2; + if (!count) + return -EINVAL; + + for (i = 0; i < count; i++) { + bank = *list++; + pin = *list++; + mux = *list++; + conf = *list++; + + ret = at91_pin_check_config(dev, bank, pin); + if (ret) + return ret; + + pio = priv->reg_base[bank]; + mask = BIT(pin); + + ret = at91_pmx_set(ops, pio, mask, mux); + if (ret) + return ret; + + ret = at91_pinconf_set(ops, pio, pin, conf); + if (ret) + return ret; + } + + return 0; +} + +const struct pinctrl_ops at91_pinctrl_ops = { + .set_state = at91_pinctrl_set_state, +}; + +static int at91_pinctrl_probe(struct udevice *dev) +{ + struct at91_pinctrl_priv *priv = dev_get_priv(dev); + fdt_addr_t addr_base; + int index; + + for (index = 0; index < MAX_GPIO_BANKS; index++) { + addr_base = dev_get_addr_index(dev, index); + if (addr_base == FDT_ADDR_T_NONE) + break; + + priv->reg_base[index] = (struct at91_port *)addr_base; + } + + priv->nbanks = index; + + return 0; +} + +static const struct udevice_id at91_pinctrl_match[] = { + { .compatible = "atmel,sama5d3-pinctrl", .data = (ulong)&sama5d3_ops }, + { .compatible = "atmel,at91sam9x5-pinctrl", .data = (ulong)&at91sam9x5_ops }, + { .compatible = "atmel,at91rm9200-pinctrl", .data = (ulong)&at91rm9200_ops }, + {} +}; + +U_BOOT_DRIVER(at91_pinctrl) = { + .name = "pinctrl_at91", + .id = UCLASS_PINCTRL, + .of_match = at91_pinctrl_match, + .probe = at91_pinctrl_probe, + .priv_auto_alloc_size = sizeof(struct at91_pinctrl_priv), + .ops = &at91_pinctrl_ops, +}; diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 1f819d4..4f86780 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -452,8 +452,7 @@ const struct dm_serial_ops ns16550_serial_ops = { .setbrg = ns16550_serial_setbrg, }; -#if !CONFIG_IS_ENABLED(OF_PLATDATA) -#if CONFIG_IS_ENABLED(OF_CONTROL) +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) /* * Please consider existing compatible strings before adding a new * one to keep this table compact. Or you may add a generic "ns16550" @@ -473,13 +472,16 @@ static const struct udevice_id ns16550_serial_ids[] = { { .compatible = "ti,dra742-uart", .data = PORT_NS16550 }, {} }; -#endif +#endif /* OF_CONTROL && !OF_PLATDATA */ #if CONFIG_IS_ENABLED(SERIAL_PRESENT) + +/* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */ +#if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL) U_BOOT_DRIVER(ns16550_serial) = { .name = "ns16550_serial", .id = UCLASS_SERIAL, -#if CONFIG_IS_ENABLED(OF_CONTROL) +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) .of_match = ns16550_serial_ids, .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), @@ -490,5 +492,6 @@ U_BOOT_DRIVER(ns16550_serial) = { .flags = DM_FLAG_PRE_RELOC, }; #endif -#endif /* !OF_PLATDATA */ +#endif /* SERIAL_PRESENT */ + #endif /* CONFIG_DM_SERIAL */ diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index a49134a..941b424 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -117,7 +117,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, divisor = UART_PL010_BAUD_9600; break; case 19200: - divisor = UART_PL010_BAUD_9600; + divisor = UART_PL010_BAUD_19200; break; case 38400: divisor = UART_PL010_BAUD_38400; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 85cc96a..87b9c87 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -122,6 +122,8 @@ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, if (!evt->buf) return ERR_PTR(-ENOMEM); + dwc3_flush_cache((uintptr_t)evt->buf, evt->length); + return evt; } diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 12b133f..e61d980 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -81,8 +81,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, trb->ctrl |= (DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_LST); - dwc3_flush_cache((long)buf_dma, len); - dwc3_flush_cache((long)trb, sizeof(*trb)); + dwc3_flush_cache((uintptr_t)buf_dma, len); + dwc3_flush_cache((uintptr_t)trb, sizeof(*trb)); if (chain) return 0; @@ -790,7 +790,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, if (!r) return; - dwc3_flush_cache((long)trb, sizeof(*trb)); + dwc3_flush_cache((uintptr_t)trb, sizeof(*trb)); status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) { @@ -821,7 +821,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, ur->actual += transferred; trb++; - dwc3_flush_cache((long)trb, sizeof(*trb)); + dwc3_flush_cache((uintptr_t)trb, sizeof(*trb)); length = trb->size & DWC3_TRB_SIZE_MASK; ep0->free_slot = 0; @@ -831,7 +831,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, maxp); transferred = min_t(u32, ur->length - transferred, transfer_size - length); - dwc3_flush_cache((long)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE); + dwc3_flush_cache((uintptr_t)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE); memcpy(buf, dwc->ep0_bounce, transferred); } else { transferred = ur->length - length; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 1156662..e065c5a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -244,7 +244,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, list_del(&req->list); req->trb = NULL; - dwc3_flush_cache((long)req->request.dma, req->request.length); + dwc3_flush_cache((uintptr_t)req->request.dma, req->request.length); if (req->request.status == -EINPROGRESS) req->request.status = status; @@ -771,8 +771,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, trb->ctrl |= DWC3_TRB_CTRL_HWO; - dwc3_flush_cache((long)dma, length); - dwc3_flush_cache((long)trb, sizeof(*trb)); + dwc3_flush_cache((uintptr_t)dma, length); + dwc3_flush_cache((uintptr_t)trb, sizeof(*trb)); } /* @@ -1769,7 +1769,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, slot %= DWC3_TRB_NUM; trb = &dep->trb_pool[slot]; - dwc3_flush_cache((long)trb, sizeof(*trb)); + dwc3_flush_cache((uintptr_t)trb, sizeof(*trb)); __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status); dwc3_gadget_giveback(dep, req, status); @@ -2668,11 +2668,12 @@ void dwc3_gadget_uboot_handle_interrupt(struct dwc3 *dwc) int i; struct dwc3_event_buffer *evt; + dwc3_thread_interrupt(0, dwc); + + /* Clean + Invalidate the buffers after touching them */ for (i = 0; i < dwc->num_event_buffers; i++) { evt = dwc->ev_buffs[i]; - dwc3_flush_cache((long)evt->buf, evt->length); + dwc3_flush_cache((uintptr_t)evt->buf, evt->length); } - - dwc3_thread_interrupt(0, dwc); } } diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h index 0d9fa22..810980f 100644 --- a/drivers/usb/dwc3/io.h +++ b/drivers/usb/dwc3/io.h @@ -48,7 +48,7 @@ static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offs); } -static inline void dwc3_flush_cache(int addr, int length) +static inline void dwc3_flush_cache(uintptr_t addr, int length) { flush_dcache_range(addr, addr + ROUND(length, CACHELINE_SIZE)); } diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index 4ba7c1d..d4bee9b 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -36,7 +36,7 @@ #define STRING_USBDOWN 2 /* Index of String serial */ #define STRING_SERIAL 3 -#define MAX_STRING_SERIAL 32 +#define MAX_STRING_SERIAL 256 /* Number of supported configurations */ #define CONFIGURATION_NUMBER 1 @@ -62,8 +62,8 @@ static struct usb_device_descriptor device_desc = { .idVendor = __constant_cpu_to_le16(CONFIG_G_DNL_VENDOR_NUM), .idProduct = __constant_cpu_to_le16(CONFIG_G_DNL_PRODUCT_NUM), - .iProduct = STRING_PRODUCT, - .iSerialNumber = STRING_SERIAL, + /* .iProduct = DYNAMIC */ + /* .iSerialNumber = DYNAMIC */ .bNumConfigurations = 1, }; @@ -224,12 +224,14 @@ static int g_dnl_bind(struct usb_composite_dev *cdev) g_dnl_string_defs[1].id = id; device_desc.iProduct = id; - id = usb_string_id(cdev); - if (id < 0) - return id; + if (strlen(g_dnl_serial)) { + id = usb_string_id(cdev); + if (id < 0) + return id; - g_dnl_string_defs[2].id = id; - device_desc.iSerialNumber = id; + g_dnl_string_defs[2].id = id; + device_desc.iSerialNumber = id; + } g_dnl_bind_fixup(&device_desc, cdev->driver->name); ret = g_dnl_config_register(cdev); diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index d253b94..0e5df15 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -15,6 +15,7 @@ #include <usbroothubdes.h> #include <wait_bit.h> #include <asm/io.h> +#include <power/regulator.h> #include "dwc2.h" @@ -159,6 +160,33 @@ static void dwc_otg_core_reset(struct dwc2_core_regs *regs) mdelay(100); } +#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR) +static int dwc_vbus_supply_init(struct udevice *dev) +{ + struct udevice *vbus_supply; + int ret; + + ret = device_get_supply_regulator(dev, "vbus-supply", &vbus_supply); + if (ret) { + debug("%s: No vbus supply\n", dev->name); + return 0; + } + + ret = regulator_set_enable(vbus_supply, true); + if (ret) { + error("Error enabling vbus supply\n"); + return ret; + } + + return 0; +} +#else +static int dwc_vbus_supply_init(struct udevice *dev) +{ + return 0; +} +#endif + /* * This function initializes the DWC_otg controller registers for * host mode. @@ -167,10 +195,12 @@ static void dwc_otg_core_reset(struct dwc2_core_regs *regs) * request queues. Host channels are reset to ensure that they are ready for * performing transfers. * + * @param dev USB Device (NULL if driver model is not being used) * @param regs Programming view of DWC_otg controller * */ -static void dwc_otg_core_host_init(struct dwc2_core_regs *regs) +static void dwc_otg_core_host_init(struct udevice *dev, + struct dwc2_core_regs *regs) { uint32_t nptxfifosize = 0; uint32_t ptxfifosize = 0; @@ -248,6 +278,9 @@ static void dwc_otg_core_host_init(struct dwc2_core_regs *regs) writel(hprt0, ®s->hprt0); } } + + if (dev) + dwc_vbus_supply_init(dev); } /* @@ -784,12 +817,19 @@ static int transfer_chunk(struct dwc2_hc_regs *hc_regs, void *aligned_buffer, (*pid << DWC2_HCTSIZ_PID_OFFSET), &hc_regs->hctsiz); - if (!in && xfer_len) { - memcpy(aligned_buffer, buffer, xfer_len); - - flush_dcache_range((unsigned long)aligned_buffer, - (unsigned long)aligned_buffer + - roundup(xfer_len, ARCH_DMA_MINALIGN)); + if (xfer_len) { + if (in) { + invalidate_dcache_range( + (uintptr_t)aligned_buffer, + (uintptr_t)aligned_buffer + + roundup(xfer_len, ARCH_DMA_MINALIGN)); + } else { + memcpy(aligned_buffer, buffer, xfer_len); + flush_dcache_range( + (uintptr_t)aligned_buffer, + (uintptr_t)aligned_buffer + + roundup(xfer_len, ARCH_DMA_MINALIGN)); + } } writel(phys_to_bus((unsigned long)aligned_buffer), &hc_regs->hcdma); @@ -1048,7 +1088,7 @@ int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev, } } -static int dwc2_init_common(struct dwc2_priv *priv) +static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv) { struct dwc2_core_regs *regs = priv->regs; uint32_t snpsid; @@ -1070,7 +1110,7 @@ static int dwc2_init_common(struct dwc2_priv *priv) #endif dwc_otg_core_init(priv); - dwc_otg_core_host_init(regs); + dwc_otg_core_host_init(dev, regs); clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | @@ -1143,7 +1183,7 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) if (board_usb_init(index, USB_INIT_HOST)) return -1; - return dwc2_init_common(priv); + return dwc2_init_common(NULL, priv); } int usb_lowlevel_stop(int index) @@ -1214,7 +1254,7 @@ static int dwc2_usb_probe(struct udevice *dev) bus_priv->desc_before_addr = true; - return dwc2_init_common(priv); + return dwc2_init_common(dev, priv); } static int dwc2_usb_remove(struct udevice *dev) diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 32ecbe2..20455ff 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -36,7 +36,7 @@ __weak void mxsfb_system_setup(void) } /* - * DENX M28EVK: + * ARIES M28EVK: * setenv videomode * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066, * le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0 diff --git a/include/common.h b/include/common.h index 26db67a..83e4037 100644 --- a/include/common.h +++ b/include/common.h @@ -225,9 +225,6 @@ void hang (void) __attribute__ ((noreturn)); int timer_init(void); int cpu_init(void); -/* */ -int initdram(void); - #include <display_options.h> /* common/main.c */ diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index 4886500..30dd9e5 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -261,6 +261,7 @@ #define CONFIG_SYS_FSL_USDHC_NUM 3 /* Framebuffer */ +#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN @@ -271,6 +272,7 @@ #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#endif #define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 3e97948..dbd4d84 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -27,7 +27,9 @@ #define CONFIG_ENV_VARS_UBOOT_CONFIG /* general purpose I/O */ +#ifndef CONFIG_DM_GPIO #define CONFIG_AT91_GPIO +#endif /* diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 1606f20..2b98f53 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -100,7 +100,10 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 1 + +/* eMMC Configs */ +#define CONFIG_SUPPORT_EMMC_BOOT +#define CONFIG_SUPPORT_EMMC_RPMB /* Filesystem support */ #define CONFIG_CMD_UBIFS @@ -152,7 +155,6 @@ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_PHYLIB #define CONFIG_ARP_TIMEOUT 200UL /* USB Configs */ @@ -235,6 +237,7 @@ #endif #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 0 + #define CONFIG_SYS_MMC_ENV_PART 1 #define CONFIG_ENV_OFFSET (709 * SZ_1K) #define CONFIG_ENV_SIZE (128 * SZ_1K) #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K)) diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h new file mode 100644 index 0000000..175ddc4 --- /dev/null +++ b/include/configs/imx6_logic.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2017 Logic PD, Inc. + * + * Configuration settings for the LogicPD i.MX6 SOM. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IMX6LOGIC_CONFIG_H +#define __IMX6LOGIC_CONFIG_H + +#define CONFIG_MXC_UART_BASE UART1_BASE +#define CONSOLE_DEV "ttymxc0" + +#include <config_distro_defaults.h> +#include "mx6_common.h" + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +#define CONFIG_MXC_UART + +/* MMC Configs */ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* Dev kit SD card */ + +/* Ethernet Configs */ +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +/* Command definition */ +#define CONFIG_CMD_BMODE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "bootm_size=0x10000000\0" \ + "fdt_addr_r=0x18000000\0" \ + "fdt_addr=0x18000000\0" \ + "ramdisk_addr_r=0x13000000\0" \ + "ramdiskaddr=0x13000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "ramdisk_file=rootfs.cpio.uboot\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "console=" CONSOLE_DEV "\0" \ + "mmcdev=1\0" \ + "mmcpart=1\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "nandroot=ubi0:rootfs rootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate}" \ + " root=${mmcroot} ${mtdparts}\0" \ + "nandargs=setenv bootargs console=${console},${baudrate}" \ + " ubi.mtd=fs root=${nandroot} ${mtdparts}\0" \ + "ramargs=setenv bootargs console=${console},${baudrate}" \ + " root=/dev/ram rw ${mtdparts}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...;" \ + " source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \ + " setenv kernelsize ${filesize}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdiskaddr}" \ + " ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \ + "mmcboot=echo Booting from mmc...; run mmcargs; run loadimage;" \ + " run loadfdt; bootz ${loadaddr} - ${fdt_addr}\0" \ + "mmcramboot=run ramargs; run loadimage;" \ + " run loadfdt; run loadramdisk;" \ + " bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \ + "nandboot=echo Booting from nand ...; " \ + " run nandargs;" \ + " nand read ${loadaddr} kernel ${kernelsize};" \ + " nand read ${fdt_addr} dtb;" \ + " bootz ${loadaddr} - ${fdt_addr}\0" \ + "nandramboot=echo Booting RAMdisk from nand ...; " \ + " nand read ${ramdiskaddr} fs ${ramdisksize};" \ + " nand read ${loadaddr} kernel ${kernelsize};" \ + " nand read ${fdt_addr} dtb;" \ + " run ramargs;" \ + " bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs" \ + " ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "autoboot=mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" +#define CONFIG_BOOTCOMMAND \ + "run autoboot" + +#define CONFIG_ARP_TIMEOUT 200UL + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Environment organization */ +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x400000 +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE + +/* NAND stuff */ +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 + +/* MTD device */ +# define CONFIG_MTD_DEVICE +# define CONFIG_CMD_MTDPARTS +# define CONFIG_MTD_PARTITIONS +# define MTDIDS_DEFAULT "nand0=gpmi-nand" +# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:4m(uboot)," \ + "1m(env),16m(kernel),1m(dtb),-(fs)" + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* EEPROM contains serial no, MAC addr and other Logic PD info */ +#define CONFIG_I2C_EEPROM + +#endif /* __IMX6LOGIC_CONFIG_H */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index a70f041..275ecf3 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -1,5 +1,5 @@ /* - * DENX M53 configuration + * Aries M53 configuration * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> * * SPDX-License-Identifier: GPL-2.0+ diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 7bda977..9e5c29f 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -265,6 +265,14 @@ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ "run nor_update;" \ "fi\0" \ + "tftp_nor_dtb="\ + "echo 'Update mccmon6 NOR DTB via TFTP'; " \ + "setenv nor_img_file imx6q-mccmon6.dtb; " \ + "setenv nor_img_size 0x20000; " \ + "setenv nor_bank_start 0x09980000; " \ + "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ + "run nor_update;" \ + "fi\0" \ "tftp_nor_img="\ "echo 'Update mccmon6 NOR image via TFTP'; " \ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 2782911..84fdf65 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -84,7 +84,7 @@ "initrd_high=0xffffffff\0" \ "fdt_high=0xffffffff\0" \ "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV "\0" \ + "console=" CONSOLE_DEV ",115200\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "update_sd_firmware=" \ diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index f35d126..2fff799 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -27,19 +27,12 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR /* I2C Configs */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -143,7 +136,7 @@ /* Environment organization */ #define CONFIG_ENV_SIZE SZ_8K -#if defined CONFIG_SYS_BOOT_SPINOR +#if defined CONFIG_SPI_BOOT #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_OFFSET (768 * 1024) #define CONFIG_ENV_SECT_SIZE (64 * 1024) diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 55f10ad..aced293 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -12,32 +12,21 @@ #include "at91-sama5_common.h" -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3 - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#define CONFIG_SYS_INIT_SP_ADDR 0x218000 #else #define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -/* SerialFlash */ - #ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif @@ -58,32 +47,6 @@ #define CONFIG_ATMEL_NAND_HW_PMECC #endif -/* MMC */ - -#ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif - -/* USB */ - -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -#endif - -/* USB device */ -#define CONFIG_USB_ETHER -#define CONFIG_USB_ETH_RNDIS -#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" - -/* Ethernet Hardware */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY - /* LCD */ #ifdef CONFIG_LCD #define LCD_BPP LCD_COLOR16 @@ -107,7 +70,7 @@ /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_MAX_SIZE 0x18000 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 @@ -137,7 +100,7 @@ #elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 #endif #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 680d591..a5fd37f 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -12,32 +12,21 @@ #include "at91-sama5_common.h" -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3 - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#define CONFIG_SYS_INIT_SP_ADDR 0x218000 #else #define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -/* SerialFlash */ - #ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif @@ -58,32 +47,6 @@ #define CONFIG_ATMEL_NAND_HW_PMECC #endif -/* MMC */ - -#ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif - -/* USB */ - -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -#endif - -/* USB device */ -#define CONFIG_USB_ETHER -#define CONFIG_USB_ETH_RNDIS -#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" - -/* Ethernet Hardware */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY - /* LCD */ #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 18 @@ -105,7 +68,7 @@ /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000 -#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_MAX_SIZE 0x18000 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 @@ -135,7 +98,7 @@ #elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 #endif #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 7de8765..4c112cc 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -25,12 +25,6 @@ #define CONFIG_SYS_TIMER_RATE 1000000 #endif -/* - * Number of bits in a C 'long' on this architecture. Set this to 32 when - * building on a 32-bit machine. - */ -#define CONFIG_SANDBOX_BITS_PER_LONG 64 - #define CONFIG_LMB #define CONFIG_ANDROID_BOOT_IMAGE diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h index 9b1f753..b60d007 100644 --- a/include/configs/socfpga_arria5_socdk.h +++ b/include/configs/socfpga_arria5_socdk.h @@ -16,13 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ /* Booting Linux */ -#define CONFIG_BOOTFILE "zImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET -#define CONFIG_BOOTCOMMAND "run ramboot" -#else -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" -#endif #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -34,31 +27,6 @@ #define CONFIG_ENV_IS_IN_MMC -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "bootimage=zImage\0" \ - "fdt_addr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "qspiload=sf probe && mtdparts default && run ubiload\0" \ - "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ - " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "ubiload=ubi part UBI && ubifsmount ubi0 && " \ - "ubifsload ${loadaddr} /boot/${bootimage} && " \ - "ubifsload ${fdt_addr} /boot/${fdtimage}\0" - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 8472b52..107c6d5 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -65,6 +65,9 @@ #define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD #endif +#define CONFIG_CMD_PXE +#define CONFIG_MENU + /* * Cache */ @@ -72,11 +75,6 @@ #define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS /* - * SDRAM controller - */ -#define CONFIG_ALTERA_SDRAM - -/* * EPCS/EPCQx1 Serial Flash Controller */ #ifdef CONFIG_ALTERA_SPI @@ -230,7 +228,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (16 * 1024 * 1024) #define DFU_DEFAULT_POLL_TIMEOUT 300 /* USB IDs */ @@ -242,13 +240,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * U-Boot environment */ #if !defined(CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_SIZE (8 * 1024) #endif /* Environment for SDMMC boot */ #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET) -#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ -#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET (34 * 512) /* just after the GPT */ #endif /* Environment for QSPI boot */ @@ -305,8 +303,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void); /* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#endif +#else +#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 #endif #endif @@ -328,4 +330,41 @@ unsigned int cm_get_qspi_controller_clk_hz(void); */ #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +/* Extra Environment */ +#ifndef CONFIG_SPL_BUILD +#include <config_distro_defaults.h> + +#ifdef CONFIG_CMD_PXE +#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) +#else +#define BOOT_TARGET_DEVICES_PXE(func) +#endif + +#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) +#else +#define BOOT_TARGET_DEVICES_MMC(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_MMC(func) \ + BOOT_TARGET_DEVICES_PXE(func) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#ifndef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "bootm_size=0xa000000\0" \ + "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ + "fdt_addr_r=0x02000000\0" \ + "scriptaddr=0x02100000\0" \ + "pxefile_addr_r=0x02200000\0" \ + "ramdisk_addr_r=0x02300000\0" \ + BOOTENV + +#endif +#endif + #endif /* __CONFIG_SOCFPGA_COMMON_H__ */ diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h index 4100ef9..dfe4980 100644 --- a/include/configs/socfpga_cyclone5_socdk.h +++ b/include/configs/socfpga_cyclone5_socdk.h @@ -16,13 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ /* Booting Linux */ -#define CONFIG_BOOTFILE "zImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET -#define CONFIG_BOOTCOMMAND "run ramboot" -#else -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" -#endif #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -34,31 +27,6 @@ #define CONFIG_ENV_IS_IN_MMC -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "bootimage=zImage\0" \ - "fdt_addr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "qspiload=sf probe && mtdparts default && run ubiload\0" \ - "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ - " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "ubiload=ubi part UBI && ubifsmount ubi0 && " \ - "ubifsload ${loadaddr} /boot/${bootimage} && " \ - "ubifsload ${fdt_addr} /boot/${fdtimage}\0" - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index f655972..dd5933d 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -16,9 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ /* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -30,23 +27,6 @@ #define CONFIG_ENV_IS_IN_MMC -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "bootimage=zImage\0" \ - "fdt_addr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_de1_soc.h b/include/configs/socfpga_de1_soc.h index c6e8d81..014828b 100644 --- a/include/configs/socfpga_de1_soc.h +++ b/include/configs/socfpga_de1_soc.h @@ -16,9 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ /* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -30,23 +27,6 @@ #define CONFIG_ENV_IS_IN_MMC -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ - "bootimage=zImage\0" \ - "fdtaddr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdtaddr} ${fdtimage}\0" \ - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index 3c9ba6d..2d36702 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -3,8 +3,8 @@ * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_DENX_MCVEVK_H__ -#define __CONFIG_DENX_MCVEVK_H__ +#ifndef __CONFIG_ARIES_MCVEVK_H__ +#define __CONFIG_ARIES_MCVEVK_H__ #include <asm/arch/base_addr_ac5.h> @@ -37,6 +37,7 @@ "netdev=eth0\0" \ "hostname=mcvevk\0" \ "kernel_addr_r=0x10000000\0" \ + "dfu_alt_info=mmc raw 0 3867148288\0" \ "update_filename=u-boot-with-spl.sfp\0" \ "update_sd_offset=0x800\0" \ "update_sd=" /* Update the SD firmware partition */ \ @@ -105,4 +106,4 @@ /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> -#endif /* __CONFIG_DENX_MCVEVK_H__ */ +#endif /* __CONFIG_ARIES_MCVEVK_H__ */ diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h index 326310b..c9fc5c9 100644 --- a/include/configs/socfpga_sockit.h +++ b/include/configs/socfpga_sockit.h @@ -16,9 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ /* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -30,31 +27,6 @@ #define CONFIG_ENV_IS_IN_MMC -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "bootimage=zImage\0" \ - "fdt_addr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "qspiload=sf probe && mtdparts default && run ubiload\0" \ - "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ - " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "ubiload=ubi part UBI && ubifsmount ubi0 && " \ - "ubifsload ${loadaddr} /boot/${bootimage} && " \ - "ubifsload ${fdt_addr} /boot/${fdtimage}\0" - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h index 90343b7..5dc9298 100644 --- a/include/configs/socfpga_socrates.h +++ b/include/configs/socfpga_socrates.h @@ -16,9 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCrates */ /* Booting Linux */ -#define CONFIG_BOOTFILE "zImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -30,29 +27,6 @@ #define CONFIG_ENV_IS_IN_MMC -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "bootimage=zImage\0" \ - "fdt_addr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "qspiroot=/dev/mtdblock0\0" \ - "qspirootfstype=jffs2\0" \ - "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ - "bootm ${loadaddr} - ${fdt_addr}\0" - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index f67fafd..64e1595 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -16,9 +16,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ /* Booting Linux */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) -#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -28,31 +25,6 @@ #define CONFIG_PHY_MARVELL #define PHY_ANEG_TIMEOUT 8000 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "bootimage=zImage\0" \ - "fdt_addr=100\0" \ - "fdtimage=socfpga.dtb\0" \ - "fsloadcmd=ext2load\0" \ - "bootm ${loadaddr} - ${fdt_addr}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootimage};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "qspiload=sf probe && mtdparts default && run ubiload\0" \ - "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ - " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "ubiload=ubi part UBI && ubifsmount ubi0 && " \ - "ubifsload ${loadaddr} /boot/${bootimage} && " \ - "ubifsload ${fdt_addr} /boot/${fdtimage}\0" - /* Environment */ #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/debug_uart.h b/include/debug_uart.h index 0d640b9..2980ae6 100644 --- a/include/debug_uart.h +++ b/include/debug_uart.h @@ -115,17 +115,23 @@ void printhex8(uint value); * Now define some functions - this should be inserted into the serial driver */ #define DEBUG_UART_FUNCS \ - void printch(int ch) \ +\ + static inline void _printch(int ch) \ { \ if (ch == '\n') \ _debug_uart_putc('\r'); \ _debug_uart_putc(ch); \ } \ \ + void printch(int ch) \ + { \ + _printch(ch); \ + } \ +\ void printascii(const char *str) \ { \ while (*str) \ - printch(*str++); \ + _printch(*str++); \ } \ \ static inline void printhex1(uint digit) \ diff --git a/include/div64.h b/include/div64.h index d833144..cecb232 100644 --- a/include/div64.h +++ b/include/div64.h @@ -4,13 +4,16 @@ * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com> * Based on former asm-ppc/div64.h and asm-m68knommu/div64.h * + * Optimization for constant divisors on 32-bit machines: + * Copyright (C) 2006-2015 Nicolas Pitre + * * The semantics of do_div() are: * * uint32_t do_div(uint64_t *n, uint32_t base) * { - * uint32_t remainder = *n % base; - * *n = *n / base; - * return remainder; + * uint32_t remainder = *n % base; + * *n = *n / base; + * return remainder; * } * * NOTE: macro parameter n is evaluated multiple times, @@ -18,8 +21,182 @@ */ #include <linux/types.h> +#include <linux/compiler.h> + +#if BITS_PER_LONG == 64 + +# define do_div(n,base) ({ \ + uint32_t __base = (base); \ + uint32_t __rem; \ + __rem = ((uint64_t)(n)) % __base; \ + (n) = ((uint64_t)(n)) / __base; \ + __rem; \ + }) + +#elif BITS_PER_LONG == 32 + +#include <linux/log2.h> + +/* + * If the divisor happens to be constant, we determine the appropriate + * inverse at compile time to turn the division into a few inline + * multiplications which ought to be much faster. And yet only if compiling + * with a sufficiently recent gcc version to perform proper 64-bit constant + * propagation. + * + * (It is unfortunate that gcc doesn't perform all this internally.) + */ + +#ifndef __div64_const32_is_OK +#define __div64_const32_is_OK (__GNUC__ >= 4) +#endif + +#define __div64_const32(n, ___b) \ +({ \ + /* \ + * Multiplication by reciprocal of b: n / b = n * (p / b) / p \ + * \ + * We rely on the fact that most of this code gets optimized \ + * away at compile time due to constant propagation and only \ + * a few multiplication instructions should remain. \ + * Hence this monstrous macro (static inline doesn't always \ + * do the trick here). \ + */ \ + uint64_t ___res, ___x, ___t, ___m, ___n = (n); \ + uint32_t ___p, ___bias; \ + \ + /* determine MSB of b */ \ + ___p = 1 << ilog2(___b); \ + \ + /* compute m = ((p << 64) + b - 1) / b */ \ + ___m = (~0ULL / ___b) * ___p; \ + ___m += (((~0ULL % ___b + 1) * ___p) + ___b - 1) / ___b; \ + \ + /* one less than the dividend with highest result */ \ + ___x = ~0ULL / ___b * ___b - 1; \ + \ + /* test our ___m with res = m * x / (p << 64) */ \ + ___res = ((___m & 0xffffffff) * (___x & 0xffffffff)) >> 32; \ + ___t = ___res += (___m & 0xffffffff) * (___x >> 32); \ + ___res += (___x & 0xffffffff) * (___m >> 32); \ + ___t = (___res < ___t) ? (1ULL << 32) : 0; \ + ___res = (___res >> 32) + ___t; \ + ___res += (___m >> 32) * (___x >> 32); \ + ___res /= ___p; \ + \ + /* Now sanitize and optimize what we've got. */ \ + if (~0ULL % (___b / (___b & -___b)) == 0) { \ + /* special case, can be simplified to ... */ \ + ___n /= (___b & -___b); \ + ___m = ~0ULL / (___b / (___b & -___b)); \ + ___p = 1; \ + ___bias = 1; \ + } else if (___res != ___x / ___b) { \ + /* \ + * We can't get away without a bias to compensate \ + * for bit truncation errors. To avoid it we'd need an \ + * additional bit to represent m which would overflow \ + * a 64-bit variable. \ + * \ + * Instead we do m = p / b and n / b = (n * m + m) / p. \ + */ \ + ___bias = 1; \ + /* Compute m = (p << 64) / b */ \ + ___m = (~0ULL / ___b) * ___p; \ + ___m += ((~0ULL % ___b + 1) * ___p) / ___b; \ + } else { \ + /* \ + * Reduce m / p, and try to clear bit 31 of m when \ + * possible, otherwise that'll need extra overflow \ + * handling later. \ + */ \ + uint32_t ___bits = -(___m & -___m); \ + ___bits |= ___m >> 32; \ + ___bits = (~___bits) << 1; \ + /* \ + * If ___bits == 0 then setting bit 31 is unavoidable. \ + * Simply apply the maximum possible reduction in that \ + * case. Otherwise the MSB of ___bits indicates the \ + * best reduction we should apply. \ + */ \ + if (!___bits) { \ + ___p /= (___m & -___m); \ + ___m /= (___m & -___m); \ + } else { \ + ___p >>= ilog2(___bits); \ + ___m >>= ilog2(___bits); \ + } \ + /* No bias needed. */ \ + ___bias = 0; \ + } \ + \ + /* \ + * Now we have a combination of 2 conditions: \ + * \ + * 1) whether or not we need to apply a bias, and \ + * \ + * 2) whether or not there might be an overflow in the cross \ + * product determined by (___m & ((1 << 63) | (1 << 31))). \ + * \ + * Select the best way to do (m_bias + m * n) / (1 << 64). \ + * From now on there will be actual runtime code generated. \ + */ \ + ___res = __arch_xprod_64(___m, ___n, ___bias); \ + \ + ___res /= ___p; \ +}) + +#ifndef __arch_xprod_64 +/* + * Default C implementation for __arch_xprod_64() + * + * Prototype: uint64_t __arch_xprod_64(const uint64_t m, uint64_t n, bool bias) + * Semantic: retval = ((bias ? m : 0) + m * n) >> 64 + * + * The product is a 128-bit value, scaled down to 64 bits. + * Assuming constant propagation to optimize away unused conditional code. + * Architectures may provide their own optimized assembly implementation. + */ +static inline uint64_t __arch_xprod_64(const uint64_t m, uint64_t n, bool bias) +{ + uint32_t m_lo = m; + uint32_t m_hi = m >> 32; + uint32_t n_lo = n; + uint32_t n_hi = n >> 32; + uint64_t res, tmp; + + if (!bias) { + res = ((uint64_t)m_lo * n_lo) >> 32; + } else if (!(m & ((1ULL << 63) | (1ULL << 31)))) { + /* there can't be any overflow here */ + res = (m + (uint64_t)m_lo * n_lo) >> 32; + } else { + res = m + (uint64_t)m_lo * n_lo; + tmp = (res < m) ? (1ULL << 32) : 0; + res = (res >> 32) + tmp; + } + + if (!(m & ((1ULL << 63) | (1ULL << 31)))) { + /* there can't be any overflow here */ + res += (uint64_t)m_lo * n_hi; + res += (uint64_t)m_hi * n_lo; + res >>= 32; + } else { + tmp = res += (uint64_t)m_lo * n_hi; + res += (uint64_t)m_hi * n_lo; + tmp = (res < tmp) ? (1ULL << 32) : 0; + res = (res >> 32) + tmp; + } + res += (uint64_t)m_hi * n_hi; + + return res; +} +#endif + +#ifndef __div64_32 extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); +#endif /* The unnecessary pointer compare is there * to check for type safety (n must be 64bit) @@ -28,14 +205,32 @@ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); uint32_t __base = (base); \ uint32_t __rem; \ (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ - if (((n) >> 32) == 0) { \ + if (__builtin_constant_p(__base) && \ + is_power_of_2(__base)) { \ + __rem = (n) & (__base - 1); \ + (n) >>= ilog2(__base); \ + } else if (__div64_const32_is_OK && \ + __builtin_constant_p(__base) && \ + __base != 0) { \ + uint32_t __res_lo, __n_lo = (n); \ + (n) = __div64_const32(n, __base); \ + /* the remainder can be computed with 32-bit regs */ \ + __res_lo = (n); \ + __rem = __n_lo - __res_lo * __base; \ + } else if (likely(((n) >> 32) == 0)) { \ __rem = (uint32_t)(n) % __base; \ (n) = (uint32_t)(n) / __base; \ - } else \ + } else \ __rem = __div64_32(&(n), __base); \ __rem; \ }) +#else /* BITS_PER_LONG == ?? */ + +# error do_div() does not yet support the C64 + +#endif /* BITS_PER_LONG */ + /* Wrapper for do_div(). Doesn't modify dividend and returns * the result, not reminder. */ diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h new file mode 100644 index 0000000..3175148 --- /dev/null +++ b/include/dt-bindings/clock/gxbb-aoclkc.h @@ -0,0 +1,66 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK + +#define CLKID_AO_REMOTE 0 +#define CLKID_AO_I2C_MASTER 1 +#define CLKID_AO_I2C_SLAVE 2 +#define CLKID_AO_UART1 3 +#define CLKID_AO_UART2 4 +#define CLKID_AO_IR_BLASTER 5 + +#endif diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h new file mode 100644 index 0000000..692846c --- /dev/null +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -0,0 +1,34 @@ +/* + * GXBB clock tree IDs + */ + +#ifndef __GXBB_CLKC_H +#define __GXBB_CLKC_H + +#define CLKID_CPUCLK 1 +#define CLKID_HDMI_PLL 2 +#define CLKID_FCLK_DIV2 4 +#define CLKID_FCLK_DIV3 5 +#define CLKID_FCLK_DIV4 6 +#define CLKID_CLK81 12 +#define CLKID_MPLL2 15 +#define CLKID_SPI 34 +#define CLKID_I2C 22 +#define CLKID_SAR_ADC 23 +#define CLKID_ETH 36 +#define CLKID_USB0 50 +#define CLKID_USB1 51 +#define CLKID_USB 55 +#define CLKID_HDMI_PCLK 63 +#define CLKID_USB1_DDR_BRIDGE 64 +#define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_SANA 69 +#define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_AO_I2C 93 +#define CLKID_SD_EMMC_A 94 +#define CLKID_SD_EMMC_B 95 +#define CLKID_SD_EMMC_C 96 +#define CLKID_SAR_ADC_CLK 97 +#define CLKID_SAR_ADC_SEL 98 + +#endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h new file mode 100644 index 0000000..e14573e --- /dev/null +++ b/include/dt-bindings/clock/imx6sl-clock.h @@ -0,0 +1,180 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6SL_H +#define __DT_BINDINGS_CLOCK_IMX6SL_H + +#define IMX6SL_CLK_DUMMY 0 +#define IMX6SL_CLK_CKIL 1 +#define IMX6SL_CLK_OSC 2 +#define IMX6SL_CLK_PLL1_SYS 3 +#define IMX6SL_CLK_PLL2_BUS 4 +#define IMX6SL_CLK_PLL3_USB_OTG 5 +#define IMX6SL_CLK_PLL4_AUDIO 6 +#define IMX6SL_CLK_PLL5_VIDEO 7 +#define IMX6SL_CLK_PLL6_ENET 8 +#define IMX6SL_CLK_PLL7_USB_HOST 9 +#define IMX6SL_CLK_USBPHY1 10 +#define IMX6SL_CLK_USBPHY2 11 +#define IMX6SL_CLK_USBPHY1_GATE 12 +#define IMX6SL_CLK_USBPHY2_GATE 13 +#define IMX6SL_CLK_PLL4_POST_DIV 14 +#define IMX6SL_CLK_PLL5_POST_DIV 15 +#define IMX6SL_CLK_PLL5_VIDEO_DIV 16 +#define IMX6SL_CLK_ENET_REF 17 +#define IMX6SL_CLK_PLL2_PFD0 18 +#define IMX6SL_CLK_PLL2_PFD1 19 +#define IMX6SL_CLK_PLL2_PFD2 20 +#define IMX6SL_CLK_PLL3_PFD0 21 +#define IMX6SL_CLK_PLL3_PFD1 22 +#define IMX6SL_CLK_PLL3_PFD2 23 +#define IMX6SL_CLK_PLL3_PFD3 24 +#define IMX6SL_CLK_PLL2_198M 25 +#define IMX6SL_CLK_PLL3_120M 26 +#define IMX6SL_CLK_PLL3_80M 27 +#define IMX6SL_CLK_PLL3_60M 28 +#define IMX6SL_CLK_STEP 29 +#define IMX6SL_CLK_PLL1_SW 30 +#define IMX6SL_CLK_OCRAM_ALT_SEL 31 +#define IMX6SL_CLK_OCRAM_SEL 32 +#define IMX6SL_CLK_PRE_PERIPH2_SEL 33 +#define IMX6SL_CLK_PRE_PERIPH_SEL 34 +#define IMX6SL_CLK_PERIPH2_CLK2_SEL 35 +#define IMX6SL_CLK_PERIPH_CLK2_SEL 36 +#define IMX6SL_CLK_CSI_SEL 37 +#define IMX6SL_CLK_LCDIF_AXI_SEL 38 +#define IMX6SL_CLK_USDHC1_SEL 39 +#define IMX6SL_CLK_USDHC2_SEL 40 +#define IMX6SL_CLK_USDHC3_SEL 41 +#define IMX6SL_CLK_USDHC4_SEL 42 +#define IMX6SL_CLK_SSI1_SEL 43 +#define IMX6SL_CLK_SSI2_SEL 44 +#define IMX6SL_CLK_SSI3_SEL 45 +#define IMX6SL_CLK_PERCLK_SEL 46 +#define IMX6SL_CLK_PXP_AXI_SEL 47 +#define IMX6SL_CLK_EPDC_AXI_SEL 48 +#define IMX6SL_CLK_GPU2D_OVG_SEL 49 +#define IMX6SL_CLK_GPU2D_SEL 50 +#define IMX6SL_CLK_LCDIF_PIX_SEL 51 +#define IMX6SL_CLK_EPDC_PIX_SEL 52 +#define IMX6SL_CLK_SPDIF0_SEL 53 +#define IMX6SL_CLK_SPDIF1_SEL 54 +#define IMX6SL_CLK_EXTERN_AUDIO_SEL 55 +#define IMX6SL_CLK_ECSPI_SEL 56 +#define IMX6SL_CLK_UART_SEL 57 +#define IMX6SL_CLK_PERIPH 58 +#define IMX6SL_CLK_PERIPH2 59 +#define IMX6SL_CLK_OCRAM_PODF 60 +#define IMX6SL_CLK_PERIPH_CLK2_PODF 61 +#define IMX6SL_CLK_PERIPH2_CLK2_PODF 62 +#define IMX6SL_CLK_IPG 63 +#define IMX6SL_CLK_CSI_PODF 64 +#define IMX6SL_CLK_LCDIF_AXI_PODF 65 +#define IMX6SL_CLK_USDHC1_PODF 66 +#define IMX6SL_CLK_USDHC2_PODF 67 +#define IMX6SL_CLK_USDHC3_PODF 68 +#define IMX6SL_CLK_USDHC4_PODF 69 +#define IMX6SL_CLK_SSI1_PRED 70 +#define IMX6SL_CLK_SSI1_PODF 71 +#define IMX6SL_CLK_SSI2_PRED 72 +#define IMX6SL_CLK_SSI2_PODF 73 +#define IMX6SL_CLK_SSI3_PRED 74 +#define IMX6SL_CLK_SSI3_PODF 75 +#define IMX6SL_CLK_PERCLK 76 +#define IMX6SL_CLK_PXP_AXI_PODF 77 +#define IMX6SL_CLK_EPDC_AXI_PODF 78 +#define IMX6SL_CLK_GPU2D_OVG_PODF 79 +#define IMX6SL_CLK_GPU2D_PODF 80 +#define IMX6SL_CLK_LCDIF_PIX_PRED 81 +#define IMX6SL_CLK_EPDC_PIX_PRED 82 +#define IMX6SL_CLK_LCDIF_PIX_PODF 83 +#define IMX6SL_CLK_EPDC_PIX_PODF 84 +#define IMX6SL_CLK_SPDIF0_PRED 85 +#define IMX6SL_CLK_SPDIF0_PODF 86 +#define IMX6SL_CLK_SPDIF1_PRED 87 +#define IMX6SL_CLK_SPDIF1_PODF 88 +#define IMX6SL_CLK_EXTERN_AUDIO_PRED 89 +#define IMX6SL_CLK_EXTERN_AUDIO_PODF 90 +#define IMX6SL_CLK_ECSPI_ROOT 91 +#define IMX6SL_CLK_UART_ROOT 92 +#define IMX6SL_CLK_AHB 93 +#define IMX6SL_CLK_MMDC_ROOT 94 +#define IMX6SL_CLK_ARM 95 +#define IMX6SL_CLK_ECSPI1 96 +#define IMX6SL_CLK_ECSPI2 97 +#define IMX6SL_CLK_ECSPI3 98 +#define IMX6SL_CLK_ECSPI4 99 +#define IMX6SL_CLK_EPIT1 100 +#define IMX6SL_CLK_EPIT2 101 +#define IMX6SL_CLK_EXTERN_AUDIO 102 +#define IMX6SL_CLK_GPT 103 +#define IMX6SL_CLK_GPT_SERIAL 104 +#define IMX6SL_CLK_GPU2D_OVG 105 +#define IMX6SL_CLK_I2C1 106 +#define IMX6SL_CLK_I2C2 107 +#define IMX6SL_CLK_I2C3 108 +#define IMX6SL_CLK_OCOTP 109 +#define IMX6SL_CLK_CSI 110 +#define IMX6SL_CLK_PXP_AXI 111 +#define IMX6SL_CLK_EPDC_AXI 112 +#define IMX6SL_CLK_LCDIF_AXI 113 +#define IMX6SL_CLK_LCDIF_PIX 114 +#define IMX6SL_CLK_EPDC_PIX 115 +#define IMX6SL_CLK_OCRAM 116 +#define IMX6SL_CLK_PWM1 117 +#define IMX6SL_CLK_PWM2 118 +#define IMX6SL_CLK_PWM3 119 +#define IMX6SL_CLK_PWM4 120 +#define IMX6SL_CLK_SDMA 121 +#define IMX6SL_CLK_SPDIF 122 +#define IMX6SL_CLK_SSI1 123 +#define IMX6SL_CLK_SSI2 124 +#define IMX6SL_CLK_SSI3 125 +#define IMX6SL_CLK_UART 126 +#define IMX6SL_CLK_UART_SERIAL 127 +#define IMX6SL_CLK_USBOH3 128 +#define IMX6SL_CLK_USDHC1 129 +#define IMX6SL_CLK_USDHC2 130 +#define IMX6SL_CLK_USDHC3 131 +#define IMX6SL_CLK_USDHC4 132 +#define IMX6SL_CLK_PLL4_AUDIO_DIV 133 +#define IMX6SL_CLK_SPBA 134 +#define IMX6SL_CLK_ENET 135 +#define IMX6SL_CLK_LVDS1_SEL 136 +#define IMX6SL_CLK_LVDS1_OUT 137 +#define IMX6SL_CLK_LVDS1_IN 138 +#define IMX6SL_CLK_ANACLK1 139 +#define IMX6SL_PLL1_BYPASS_SRC 140 +#define IMX6SL_PLL2_BYPASS_SRC 141 +#define IMX6SL_PLL3_BYPASS_SRC 142 +#define IMX6SL_PLL4_BYPASS_SRC 143 +#define IMX6SL_PLL5_BYPASS_SRC 144 +#define IMX6SL_PLL6_BYPASS_SRC 145 +#define IMX6SL_PLL7_BYPASS_SRC 146 +#define IMX6SL_CLK_PLL1 147 +#define IMX6SL_CLK_PLL2 148 +#define IMX6SL_CLK_PLL3 149 +#define IMX6SL_CLK_PLL4 150 +#define IMX6SL_CLK_PLL5 151 +#define IMX6SL_CLK_PLL6 152 +#define IMX6SL_CLK_PLL7 153 +#define IMX6SL_PLL1_BYPASS 154 +#define IMX6SL_PLL2_BYPASS 155 +#define IMX6SL_PLL3_BYPASS 156 +#define IMX6SL_PLL4_BYPASS 157 +#define IMX6SL_PLL5_BYPASS 158 +#define IMX6SL_PLL6_BYPASS 159 +#define IMX6SL_PLL7_BYPASS 160 +#define IMX6SL_CLK_SSI1_IPG 161 +#define IMX6SL_CLK_SSI2_IPG 162 +#define IMX6SL_CLK_SSI3_IPG 163 +#define IMX6SL_CLK_SPDIF_GCLK 164 +#define IMX6SL_CLK_END 165 + +#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */ diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index bbca3d0..2732d6c 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -15,6 +15,8 @@ #define AT91_PINCTRL_DEGLITCH (1 << 2) #define AT91_PINCTRL_PULL_DOWN (1 << 3) #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_OUTPUT (1 << 7) +#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) diff --git a/include/dt-bindings/reset/gxbb-aoclkc.h b/include/dt-bindings/reset/gxbb-aoclkc.h new file mode 100644 index 0000000..9e3fd60 --- /dev/null +++ b/include/dt-bindings/reset/gxbb-aoclkc.h @@ -0,0 +1,66 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK +#define DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK + +#define RESET_AO_REMOTE 0 +#define RESET_AO_I2C_MASTER 1 +#define RESET_AO_I2C_SLAVE 2 +#define RESET_AO_UART1 3 +#define RESET_AO_UART2 4 +#define RESET_AO_IR_BLASTER 5 + +#endif diff --git a/include/fdtdec.h b/include/fdtdec.h index d074478..2134701 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -155,6 +155,14 @@ enum fdt_compat_id { COMPAT_INTEL_BAYTRAIL_FSP_MDP, /* Intel FSP memory-down params */ COMPAT_INTEL_IVYBRIDGE_FSP, /* Intel Ivy Bridge FSP */ COMPAT_SUNXI_NAND, /* SUNXI NAND controller */ + COMPAT_ALTERA_SOCFPGA_CLK, /* SoCFPGA Clock initialization */ + COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE, /* SoCFPGA pinctrl-single */ + COMPAT_ALTERA_SOCFPGA_H2F_BRG, /* SoCFPGA hps2fpga bridge */ + COMPAT_ALTERA_SOCFPGA_LWH2F_BRG, /* SoCFPGA lwhps2fpga bridge */ + COMPAT_ALTERA_SOCFPGA_F2H_BRG, /* SoCFPGA fpga2hps bridge */ + COMPAT_ALTERA_SOCFPGA_F2SDR0, /* SoCFPGA fpga2SDRAM0 bridge */ + COMPAT_ALTERA_SOCFPGA_F2SDR1, /* SoCFPGA fpga2SDRAM1 bridge */ + COMPAT_ALTERA_SOCFPGA_F2SDR2, /* SoCFPGA fpga2SDRAM2 bridge */ COMPAT_COUNT, }; diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index b8de46b..6a1f04b 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -477,4 +477,12 @@ typedef struct fixed_ddr_parm{ int max_freq; fsl_ddr_cfg_regs_t *ddr_settings; } fixed_ddr_parm_t; + +/** + * fsl_initdram() - Set up the SDRAM + * + * @return 0 if OK, -ve on error + */ +int fsl_initdram(void); + #endif diff --git a/include/linux/math64.h b/include/linux/math64.h index 6d760d7..08584c8 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -1,10 +1,15 @@ #ifndef _LINUX_MATH64_H #define _LINUX_MATH64_H +#include <div64.h> +#include <linux/bitops.h> #include <linux/types.h> #if BITS_PER_LONG == 64 +#define div64_long(x, y) div64_s64((x), (y)) +#define div64_ul(x, y) div64_u64((x), (y)) + /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder * @@ -27,6 +32,15 @@ static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) } /** + * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder + */ +static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +/** * div64_u64 - unsigned 64bit divide with 64bit divisor */ static inline u64 div64_u64(u64 dividend, u64 divisor) @@ -34,8 +48,19 @@ static inline u64 div64_u64(u64 dividend, u64 divisor) return dividend / divisor; } +/** + * div64_s64 - signed 64bit divide with 64bit divisor + */ +static inline s64 div64_s64(s64 dividend, s64 divisor) +{ + return dividend / divisor; +} + #elif BITS_PER_LONG == 32 +#define div64_long(x, y) div_s64((x), (y)) +#define div64_ul(x, y) div_u64((x), (y)) + #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) { @@ -48,10 +73,18 @@ static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder); #endif +#ifndef div64_u64_rem +extern u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder); +#endif + #ifndef div64_u64 extern u64 div64_u64(u64 dividend, u64 divisor); #endif +#ifndef div64_s64 +extern s64 div64_s64(s64 dividend, s64 divisor); +#endif + #endif /* BITS_PER_LONG */ /** @@ -82,4 +115,143 @@ static inline s64 div_s64(s64 dividend, s32 divisor) u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); +static __always_inline u32 +__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + u32 ret = 0; + + while (dividend >= divisor) { + /* The following asm() prevents the compiler from + optimising this loop into a modulo operation. */ + asm("" : "+rm"(dividend)); + + dividend -= divisor; + ret++; + } + + *remainder = dividend; + + return ret; +} + +#ifndef mul_u32_u32 +/* + * Many a GCC version messes this up and generates a 64x64 mult :-( + */ +static inline u64 mul_u32_u32(u32 a, u32 b) +{ + return (u64)a * b; +} +#endif + +#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__) + +#ifndef mul_u64_u32_shr +static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift) +{ + return (u64)(((unsigned __int128)a * mul) >> shift); +} +#endif /* mul_u64_u32_shr */ + +#ifndef mul_u64_u64_shr +static inline u64 mul_u64_u64_shr(u64 a, u64 mul, unsigned int shift) +{ + return (u64)(((unsigned __int128)a * mul) >> shift); +} +#endif /* mul_u64_u64_shr */ + +#else + +#ifndef mul_u64_u32_shr +static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift) +{ + u32 ah, al; + u64 ret; + + al = a; + ah = a >> 32; + + ret = mul_u32_u32(al, mul) >> shift; + if (ah) + ret += mul_u32_u32(ah, mul) << (32 - shift); + + return ret; +} +#endif /* mul_u64_u32_shr */ + +#ifndef mul_u64_u64_shr +static inline u64 mul_u64_u64_shr(u64 a, u64 b, unsigned int shift) +{ + union { + u64 ll; + struct { +#ifdef __BIG_ENDIAN + u32 high, low; +#else + u32 low, high; +#endif + } l; + } rl, rm, rn, rh, a0, b0; + u64 c; + + a0.ll = a; + b0.ll = b; + + rl.ll = mul_u32_u32(a0.l.low, b0.l.low); + rm.ll = mul_u32_u32(a0.l.low, b0.l.high); + rn.ll = mul_u32_u32(a0.l.high, b0.l.low); + rh.ll = mul_u32_u32(a0.l.high, b0.l.high); + + /* + * Each of these lines computes a 64-bit intermediate result into "c", + * starting at bits 32-95. The low 32-bits go into the result of the + * multiplication, the high 32-bits are carried into the next step. + */ + rl.l.high = c = (u64)rl.l.high + rm.l.low + rn.l.low; + rh.l.low = c = (c >> 32) + rm.l.high + rn.l.high + rh.l.low; + rh.l.high = (c >> 32) + rh.l.high; + + /* + * The 128-bit result of the multiplication is in rl.ll and rh.ll, + * shift it right and throw away the high part of the result. + */ + if (shift == 0) + return rl.ll; + if (shift < 64) + return (rl.ll >> shift) | (rh.ll << (64 - shift)); + return rh.ll >> (shift & 63); +} +#endif /* mul_u64_u64_shr */ + +#endif + +#ifndef mul_u64_u32_div +static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 divisor) +{ + union { + u64 ll; + struct { +#ifdef __BIG_ENDIAN + u32 high, low; +#else + u32 low, high; +#endif + } l; + } u, rl, rh; + + u.ll = a; + rl.ll = mul_u32_u32(u.l.low, mul); + rh.ll = mul_u32_u32(u.l.high, mul) + rl.l.high; + + /* Bits 32-63 of the result will be in rh.l.low. */ + rl.l.high = do_div(rh.ll, divisor); + + /* Bits 0-31 of the result will be in rl.l.low. */ + do_div(rl.ll, divisor); + + rl.l.high = rh.l.low; + return rl.ll; +} +#endif /* mul_u64_u32_div */ + #endif /* _LINUX_MATH64_H */ diff --git a/include/aes.h b/include/uboot_aes.h index 6315c02..6315c02 100644 --- a/include/aes.h +++ b/include/uboot_aes.h @@ -27,7 +27,7 @@ #else #include <string.h> #endif -#include "aes.h" +#include "uboot_aes.h" /* forward s-box */ static const u8 sbox[256] = { diff --git a/lib/div64.c b/lib/div64.c index 319fca5..206f582 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -13,14 +13,19 @@ * * Code generated for this function might be very inefficient * for some CPUs. __div64_32() can be overridden by linking arch-specific - * assembly versions such as arch/powerpc/lib/div64.S and arch/sh/lib/div64.S. + * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S + * or by defining a preprocessor macro in arch/include/asm/div64.h. */ -#include <div64.h> -#include <linux/types.h> -#include <linux/compiler.h> +#include <linux/compat.h> +#include <linux/kernel.h> +#include <linux/math64.h> -uint32_t notrace __div64_32(uint64_t *n, uint32_t base) +/* Not needed on 64bit architectures */ +#if BITS_PER_LONG == 32 + +#ifndef __div64_32 +uint32_t __attribute__((weak)) __div64_32(uint64_t *n, uint32_t base) { uint64_t rem = *n; uint64_t b = base; @@ -52,3 +57,129 @@ uint32_t notrace __div64_32(uint64_t *n, uint32_t base) *n = res; return rem; } +EXPORT_SYMBOL(__div64_32); +#endif + +#ifndef div_s64_rem +s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) +{ + u64 quotient; + + if (dividend < 0) { + quotient = div_u64_rem(-dividend, abs(divisor), (u32 *)remainder); + *remainder = -*remainder; + if (divisor > 0) + quotient = -quotient; + } else { + quotient = div_u64_rem(dividend, abs(divisor), (u32 *)remainder); + if (divisor < 0) + quotient = -quotient; + } + return quotient; +} +EXPORT_SYMBOL(div_s64_rem); +#endif + +/** + * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder + * @dividend: 64bit dividend + * @divisor: 64bit divisor + * @remainder: 64bit remainder + * + * This implementation is a comparable to algorithm used by div64_u64. + * But this operation, which includes math for calculating the remainder, + * is kept distinct to avoid slowing down the div64_u64 operation on 32bit + * systems. + */ +#ifndef div64_u64_rem +u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) +{ + u32 high = divisor >> 32; + u64 quot; + + if (high == 0) { + u32 rem32; + quot = div_u64_rem(dividend, divisor, &rem32); + *remainder = rem32; + } else { + int n = 1 + fls(high); + quot = div_u64(dividend >> n, divisor >> n); + + if (quot != 0) + quot--; + + *remainder = dividend - quot * divisor; + if (*remainder >= divisor) { + quot++; + *remainder -= divisor; + } + } + + return quot; +} +EXPORT_SYMBOL(div64_u64_rem); +#endif + +/** + * div64_u64 - unsigned 64bit divide with 64bit divisor + * @dividend: 64bit dividend + * @divisor: 64bit divisor + * + * This implementation is a modified version of the algorithm proposed + * by the book 'Hacker's Delight'. The original source and full proof + * can be found here and is available for use without restriction. + * + * 'http://www.hackersdelight.org/hdcodetxt/divDouble.c.txt' + */ +#ifndef div64_u64 +u64 div64_u64(u64 dividend, u64 divisor) +{ + u32 high = divisor >> 32; + u64 quot; + + if (high == 0) { + quot = div_u64(dividend, divisor); + } else { + int n = 1 + fls(high); + quot = div_u64(dividend >> n, divisor >> n); + + if (quot != 0) + quot--; + if ((dividend - quot * divisor) >= divisor) + quot++; + } + + return quot; +} +EXPORT_SYMBOL(div64_u64); +#endif + +/** + * div64_s64 - signed 64bit divide with 64bit divisor + * @dividend: 64bit dividend + * @divisor: 64bit divisor + */ +#ifndef div64_s64 +s64 div64_s64(s64 dividend, s64 divisor) +{ + s64 quot, t; + + quot = div64_u64(abs(dividend), abs(divisor)); + t = (dividend ^ divisor) >> 63; + + return (quot ^ t) - t; +} +EXPORT_SYMBOL(div64_s64); +#endif + +#endif /* BITS_PER_LONG == 32 */ + +/* + * Iterative div/mod for use when dividend is not expected to be much + * bigger than divisor. + */ +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + return __iter_div_u64_rem(dividend, divisor, remainder); +} +EXPORT_SYMBOL(iter_div_u64_rem); diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 1edfbf2..94372cc 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -66,6 +66,14 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"), COMPAT(INTEL_IVYBRIDGE_FSP, "intel,ivybridge-fsp"), COMPAT(COMPAT_SUNXI_NAND, "allwinner,sun4i-a10-nand"), + COMPAT(ALTERA_SOCFPGA_CLK, "altr,clk-mgr"), + COMPAT(ALTERA_SOCFPGA_PINCTRL_SINGLE, "pinctrl-single"), + COMPAT(ALTERA_SOCFPGA_H2F_BRG, "altr,socfpga-hps2fpga-bridge"), + COMPAT(ALTERA_SOCFPGA_LWH2F_BRG, "altr,socfpga-lwhps2fpga-bridge"), + COMPAT(ALTERA_SOCFPGA_F2H_BRG, "altr,socfpga-fpga2hps-bridge"), + COMPAT(ALTERA_SOCFPGA_F2SDR0, "altr,socfpga-fpga2sdram0-bridge"), + COMPAT(ALTERA_SOCFPGA_F2SDR1, "altr,socfpga-fpga2sdram1-bridge"), + COMPAT(ALTERA_SOCFPGA_F2SDR2, "altr,socfpga-fpga2sdram2-bridge"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id) diff --git a/lib/libfdt/fdt_region.c b/lib/libfdt/fdt_region.c index d2ce4c1..8b8a547 100644 --- a/lib/libfdt/fdt_region.c +++ b/lib/libfdt/fdt_region.c @@ -63,6 +63,30 @@ static int region_list_contains_offset(struct fdt_region_state *info, return 0; } +/** + * fdt_add_alias_regions() - Add regions covering the aliases that we want + * + * The /aliases node is not automatically included by fdtgrep unless the + * command-line arguments cause to be included (or not excluded). However + * aliases are special in that we generally want to include those which + * reference a node that fdtgrep includes. + * + * In fact we want to include only aliases for those nodes still included in + * the fdt, and drop the other aliases since they point to nodes that will not + * be present. + * + * This function scans the aliases and adds regions for those which we want + * to keep. + * + * @fdt: Device tree to scan + * @region: List of regions + * @count: Number of regions in the list so far (i.e. starting point for this + * function) + * @max_regions: Maximum number of regions in @region list + * @info: Place to put the region state + * @return number of regions after processing, or -FDT_ERR_NOSPACE if we did + * not have enough room in the regions table for the regions we wanted to add. + */ int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, int max_regions, struct fdt_region_state *info) { @@ -74,11 +98,17 @@ int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, if (node < 0) return -FDT_ERR_NOTFOUND; - /* The aliases node must come before the others */ + /* + * Find the next node so that we know where the /aliases node ends. We + * need special handling if /aliases is the last node. + */ node_end = fdt_next_subnode(fdt, node); - if (node_end <= 0) - return -FDT_ERR_BADLAYOUT; - node_end -= sizeof(fdt32_t); + if (node_end == -FDT_ERR_NOTFOUND) + /* Move back to the FDT_END_NODE tag of '/' */ + node_end = fdt_size_dt_struct(fdt) - sizeof(fdt32_t) * 2; + else if (node_end < 0) /* other error */ + return node_end; + node_end -= sizeof(fdt32_t); /* Move to FDT_END_NODE tag of /aliases */ did_alias_header = 0; info->region = region; @@ -109,7 +139,7 @@ int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, fdt_add_region(info, base + offset, next - offset); } - /* Add the 'end' tag */ + /* Add the FDT_END_NODE tag */ if (did_alias_header) fdt_add_region(info, base + node_end, sizeof(fdt32_t)); diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c index 6def8f9..0b04813 100644 --- a/lib/tiny-printf.c +++ b/lib/tiny-printf.c @@ -12,6 +12,7 @@ #include <common.h> #include <stdarg.h> #include <serial.h> +#include <linux/ctype.h> struct printf_info { char *bf; /* Digit buffer */ @@ -52,6 +53,154 @@ static void div_out(struct printf_info *info, unsigned long *num, out_dgt(info, dgt); } +#ifdef CONFIG_SPL_NET_SUPPORT +static void string(struct printf_info *info, char *s) +{ + char ch; + + while ((ch = *s++)) + out(info, ch); +} + +static const char hex_asc[] = "0123456789abcdef"; +#define hex_asc_lo(x) hex_asc[((x) & 0x0f)] +#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] + +static inline char *pack_hex_byte(char *buf, u8 byte) +{ + *buf++ = hex_asc_hi(byte); + *buf++ = hex_asc_lo(byte); + return buf; +} + +static void mac_address_string(struct printf_info *info, u8 *addr, + bool separator) +{ + /* (6 * 2 hex digits), 5 colons and trailing zero */ + char mac_addr[6 * 3]; + char *p = mac_addr; + int i; + + for (i = 0; i < 6; i++) { + p = pack_hex_byte(p, addr[i]); + if (separator && i != 5) + *p++ = ':'; + } + *p = '\0'; + + string(info, mac_addr); +} + +static char *put_dec_trunc(char *buf, unsigned int q) +{ + unsigned int d3, d2, d1, d0; + d1 = (q >> 4) & 0xf; + d2 = (q >> 8) & 0xf; + d3 = (q >> 12); + + d0 = 6 * (d3 + d2 + d1) + (q & 0xf); + q = (d0 * 0xcd) >> 11; + d0 = d0 - 10 * q; + *buf++ = d0 + '0'; /* least significant digit */ + d1 = q + 9 * d3 + 5 * d2 + d1; + if (d1 != 0) { + q = (d1 * 0xcd) >> 11; + d1 = d1 - 10 * q; + *buf++ = d1 + '0'; /* next digit */ + + d2 = q + 2 * d2; + if ((d2 != 0) || (d3 != 0)) { + q = (d2 * 0xd) >> 7; + d2 = d2 - 10 * q; + *buf++ = d2 + '0'; /* next digit */ + + d3 = q + 4 * d3; + if (d3 != 0) { + q = (d3 * 0xcd) >> 11; + d3 = d3 - 10 * q; + *buf++ = d3 + '0'; /* next digit */ + if (q != 0) + *buf++ = q + '0'; /* most sign. digit */ + } + } + } + return buf; +} + +static void ip4_addr_string(struct printf_info *info, u8 *addr) +{ + /* (4 * 3 decimal digits), 3 dots and trailing zero */ + char ip4_addr[4 * 4]; + char temp[3]; /* hold each IP quad in reverse order */ + char *p = ip4_addr; + int i, digits; + + for (i = 0; i < 4; i++) { + digits = put_dec_trunc(temp, addr[i]) - temp; + /* reverse the digits in the quad */ + while (digits--) + *p++ = temp[digits]; + if (i != 3) + *p++ = '.'; + } + *p = '\0'; + + string(info, ip4_addr); +} +#endif + +/* + * Show a '%p' thing. A kernel extension is that the '%p' is followed + * by an extra set of characters that are extended format + * specifiers. + * + * Right now we handle: + * + * - 'M' For a 6-byte MAC address, it prints the address in the + * usual colon-separated hex notation. + * - 'm' Same as above except there is no colon-separator. + * - 'I4'for IPv4 addresses printed in the usual way (dot-separated + * decimal). + */ + +static void pointer(struct printf_info *info, const char *fmt, void *ptr) +{ +#ifdef DEBUG + unsigned long num = (uintptr_t)ptr; + unsigned long div; +#endif + + switch (*fmt) { +#ifdef DEBUG + case 'a': + + switch (fmt[1]) { + case 'p': + default: + num = *(phys_addr_t *)ptr; + break; + } + break; +#endif +#ifdef CONFIG_SPL_NET_SUPPORT + case 'm': + return mac_address_string(info, ptr, false); + case 'M': + return mac_address_string(info, ptr, true); + case 'I': + if (fmt[1] == '4') + return ip4_addr_string(info, ptr); +#endif + default: + break; + } +#ifdef DEBUG + div = 1UL << (sizeof(long) * 8 - 4); + for (; div; div /= 0x10) + div_out(info, &num, div); +#endif +} + static int _vprintf(struct printf_info *info, const char *fmt, va_list va) { char ch; @@ -144,6 +293,11 @@ static int _vprintf(struct printf_info *info, const char *fmt, va_list va) case 's': p = va_arg(va, char*); break; + case 'p': + pointer(info, fmt, va_arg(va, void *)); + while (isalnum(fmt[0])) + fmt++; + break; case '%': out(info, '%'); default: diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 9d238bd..d487be7 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -125,6 +125,7 @@ CONFIG_ARC_SERIAL CONFIG_ARC_UART_BASE CONFIG_ARIA CONFIG_ARIA_FPGA +CONFIG_ARIES_M28_V10 CONFIG_ARM926EJS CONFIG_ARMADA100 CONFIG_ARMADA100_FEC @@ -661,7 +662,6 @@ CONFIG_DEFAULT_SPI_CS CONFIG_DEFAULT_SPI_MODE CONFIG_DEF_HWCONFIG CONFIG_DELAY_ENVIRONMENT -CONFIG_DENX_M28_V10 CONFIG_DESIGNWARE_ETH CONFIG_DESIGNWARE_WATCHDOG CONFIG_DEVCONCENTER diff --git a/tools/Makefile b/tools/Makefile index fa1b85b..2fc4a58 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -120,7 +120,7 @@ _libfdt.so-sharedobjs += $(LIBFDT_OBJS) libfdt: tools/_libfdt.so: $(patsubst %.o,%.c,$(LIBFDT_OBJS)) tools/libfdt_wrap.c - LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= python $(srctree)/lib/libfdt/setup.py \ + LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= ${PYTHON} $(srctree)/lib/libfdt/setup.py \ "$(_hostc_flags)" $^ mv _libfdt.so $@ diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index 236e061..b0ea57e 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -95,8 +95,9 @@ u-boot/ source directory # Possible build outcomes OUTCOME_OK, OUTCOME_WARNING, OUTCOME_ERROR, OUTCOME_UNKNOWN = range(4) -# Translate a commit subject into a valid filename -trans_valid_chars = string.maketrans("/: ", "---") +# Translate a commit subject into a valid filename (and handle unicode) +trans_valid_chars = string.maketrans('/: ', '---') +trans_valid_chars = trans_valid_chars.decode('latin-1') BASE_CONFIG_FILENAMES = [ 'u-boot.cfg', 'u-boot-spl.cfg', 'u-boot-tpl.cfg' diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py index f2b2acd..acaf500 100644 --- a/tools/buildman/builderthread.py +++ b/tools/buildman/builderthread.py @@ -280,13 +280,13 @@ class BuilderThread(threading.Thread): outfile = os.path.join(build_dir, 'log') with open(outfile, 'w') as fd: if result.stdout: - fd.write(result.stdout) + fd.write(result.stdout.encode('latin-1', 'ignore')) errfile = self.builder.GetErrFile(result.commit_upto, result.brd.target) if result.stderr: with open(errfile, 'w') as fd: - fd.write(result.stderr) + fd.write(result.stderr.encode('latin-1', 'ignore')) elif os.path.exists(errfile): os.remove(errfile) diff --git a/tools/dtoc/fdt_util.py b/tools/dtoc/fdt_util.py index e6d523b..b9dfae8 100644 --- a/tools/dtoc/fdt_util.py +++ b/tools/dtoc/fdt_util.py @@ -24,6 +24,8 @@ def fdt32_to_cpu(val): A native-endian integer value """ if sys.version_info > (3, 0): + if isinstance(val, bytes): + val = val.decode('utf-8') val = val.encode('raw_unicode_escape') return struct.unpack('>I', val)[0] diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 862a0b1..299e0c9 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -34,6 +34,7 @@ # include <mtd/mtd-user.h> #endif +#include "fw_env_private.h" #include "fw_env.h" struct env_opts default_opts = { @@ -277,6 +278,7 @@ int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts) printf ("%s\n", env); } + fw_env_close(opts); return 0; } @@ -299,10 +301,12 @@ int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts) printf("%s=%s\n", name, val); } + fw_env_close(opts); + return rc; } -int fw_env_close(struct env_opts *opts) +int fw_env_flush(struct env_opts *opts) { int ret; @@ -471,6 +475,7 @@ int fw_setenv(int argc, char *argv[], struct env_opts *opts) char *name, **valv; char *value = NULL; int valc; + int ret; if (!opts) opts = &default_opts; @@ -490,8 +495,10 @@ int fw_setenv(int argc, char *argv[], struct env_opts *opts) valv = argv + 1; valc = argc - 1; - if (env_flags_validate_env_set_params(name, valv, valc) < 0) + if (env_flags_validate_env_set_params(name, valv, valc) < 0) { + fw_env_close(opts); return -1; + } len = 0; for (i = 0; i < valc; ++i) { @@ -517,7 +524,10 @@ int fw_setenv(int argc, char *argv[], struct env_opts *opts) free(value); - return fw_env_close(opts); + ret = fw_env_flush(opts); + fw_env_close(opts); + + return ret; } /* @@ -638,7 +648,9 @@ int fw_parse_script(char *fname, struct env_opts *opts) if (strcmp(fname, "-") != 0) fclose(fp); - ret |= fw_env_close(opts); + ret |= fw_env_flush(opts); + + fw_env_close(opts); return ret; } @@ -1104,11 +1116,11 @@ int fw_env_open(struct env_opts *opts) { int crc0, crc0_ok; unsigned char flag0; - void *addr0; + void *addr0 = NULL; int crc1, crc1_ok; unsigned char flag1; - void *addr1; + void *addr1 = NULL; int ret; @@ -1119,14 +1131,15 @@ int fw_env_open(struct env_opts *opts) opts = &default_opts; if (parse_config(opts)) /* should fill envdevices */ - return -1; + return -EINVAL; addr0 = calloc(1, CUR_ENVSIZE); if (addr0 == NULL) { fprintf(stderr, "Not enough memory for environment (%ld bytes)\n", CUR_ENVSIZE); - return -1; + ret = -ENOMEM; + goto open_cleanup; } /* read environment from FLASH to local buffer */ @@ -1145,8 +1158,10 @@ int fw_env_open(struct env_opts *opts) } dev_current = 0; - if (flash_io (O_RDONLY)) - return -1; + if (flash_io(O_RDONLY)) { + ret = -EIO; + goto open_cleanup; + } crc0 = crc32 (0, (uint8_t *) environment.data, ENV_SIZE); @@ -1154,7 +1169,7 @@ int fw_env_open(struct env_opts *opts) ret = env_aes_cbc_crypt(environment.data, 0, opts->aes_key); if (ret) - return ret; + goto open_cleanup; } crc0_ok = (crc0 == *environment.crc); @@ -1173,7 +1188,8 @@ int fw_env_open(struct env_opts *opts) fprintf(stderr, "Not enough memory for environment (%ld bytes)\n", CUR_ENVSIZE); - return -1; + ret = -ENOMEM; + goto open_cleanup; } redundant = addr1; @@ -1182,8 +1198,10 @@ int fw_env_open(struct env_opts *opts) * other pointers in environment still point inside addr0 */ environment.image = addr1; - if (flash_io (O_RDONLY)) - return -1; + if (flash_io(O_RDONLY)) { + ret = -EIO; + goto open_cleanup; + } /* Check flag scheme compatibility */ if (DEVTYPE(dev_current) == MTD_NORFLASH && @@ -1203,7 +1221,8 @@ int fw_env_open(struct env_opts *opts) environment.flag_scheme = FLAG_INCREMENTAL; } else { fprintf (stderr, "Incompatible flash types!\n"); - return -1; + ret = -EINVAL; + goto open_cleanup; } crc1 = crc32 (0, (uint8_t *) redundant->data, ENV_SIZE); @@ -1212,7 +1231,7 @@ int fw_env_open(struct env_opts *opts) ret = env_aes_cbc_crypt(redundant->data, 0, opts->aes_key); if (ret) - return ret; + goto open_cleanup; } crc1_ok = (crc1 == redundant->crc); @@ -1284,6 +1303,28 @@ int fw_env_open(struct env_opts *opts) #endif } return 0; + +open_cleanup: + if (addr0) + free(addr0); + + if (addr1) + free(addr0); + + return ret; +} + +/* + * Simply free allocated buffer with environment + */ +int fw_env_close(struct env_opts *opts) +{ + if (environment.image) + free(environment.image); + + environment.image = NULL; + + return 0; } static int check_device_config(int dev) diff --git a/tools/env/fw_env.h b/tools/env/fw_env.h index 05588ab..04bb646 100644 --- a/tools/env/fw_env.h +++ b/tools/env/fw_env.h @@ -5,57 +5,15 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <aes.h> #include <stdint.h> - -/* Pull in the current config to define the default environment */ -#include <linux/kconfig.h> - -#ifndef __ASSEMBLY__ -#define __ASSEMBLY__ /* get only #defines from config.h */ -#include <config.h> -#undef __ASSEMBLY__ -#else -#include <config.h> -#endif +#include <uboot_aes.h> /* - * To build the utility with the static configuration - * comment out the next line. - * See included "fw_env.config" sample file - * for notes on configuration. + * Programs using the library must check which API is available, + * that varies depending on the U-Boot version. + * This can be changed in future */ -#define CONFIG_FILE "/etc/fw_env.config" - -#ifndef CONFIG_FILE -#define HAVE_REDUND /* For systems with 2 env sectors */ -#define DEVICE1_NAME "/dev/mtd1" -#define DEVICE2_NAME "/dev/mtd2" -#define DEVICE1_OFFSET 0x0000 -#define ENV1_SIZE 0x4000 -#define DEVICE1_ESIZE 0x4000 -#define DEVICE1_ENVSECTORS 2 -#define DEVICE2_OFFSET 0x0000 -#define ENV2_SIZE 0x4000 -#define DEVICE2_ESIZE 0x4000 -#define DEVICE2_ENVSECTORS 2 -#endif - -#ifndef CONFIG_BAUDRATE -#define CONFIG_BAUDRATE 115200 -#endif - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" -#endif +#define FW_ENV_API_VERSION 1 struct env_opts { #ifdef CONFIG_FILE @@ -95,7 +53,7 @@ int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts); * @opts: how to retrieve environment from flash, defaults are used if NULL * * Description: - * Uses fw_env_open, fw_env_write, fw_env_close + * Uses fw_env_open, fw_env_write, fw_env_flush * * Return: * 0 on success, -1 on failure (modifies errno) @@ -112,7 +70,7 @@ int fw_setenv(int argc, char *argv[], struct env_opts *opts); * @opts: encryption key, configuration file, defaults are used if NULL * * Description: - * Uses fw_env_open, fw_env_write, fw_env_close + * Uses fw_env_open, fw_env_write, fw_env_flush * * Return: * 0 success, -1 on failure (modifies errno) @@ -180,7 +138,17 @@ char *fw_getenv(char *name); int fw_env_write(char *name, char *value); /** - * fw_env_close - write the environment from RAM cache back to flash + * fw_env_flush - write the environment from RAM cache back to flash + * + * @opts: encryption key, configuration file, defaults are used if NULL + * + * Return: + * 0 on success, -1 on failure (modifies errno) + */ +int fw_env_flush(struct env_opts *opts); + +/** + * fw_env_close - free allocated structure and close env * * @opts: encryption key, configuration file, defaults are used if NULL * @@ -189,4 +157,13 @@ int fw_env_write(char *name, char *value); */ int fw_env_close(struct env_opts *opts); + +/** + * fw_env_version - return the current version of the library + * + * Return: + * version string of the library + */ +char *fw_env_version(void); + unsigned long crc32(unsigned long, const unsigned char *, unsigned); diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c index 443de36..b8bff26 100644 --- a/tools/env/fw_env_main.c +++ b/tools/env/fw_env_main.c @@ -34,6 +34,7 @@ #include <stdlib.h> #include <sys/file.h> #include <unistd.h> +#include "fw_env_private.h" #include "fw_env.h" #define CMD_PRINTENV "fw_printenv" diff --git a/tools/env/fw_env_private.h b/tools/env/fw_env_private.h new file mode 100644 index 0000000..0c27da0 --- /dev/null +++ b/tools/env/fw_env_private.h @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2002-2008 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Pull in the current config to define the default environment */ +#include <linux/kconfig.h> + +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* get only #defines from config.h */ +#include <config.h> +#undef __ASSEMBLY__ +#else +#include <config.h> +#endif + +/* + * To build the utility with the static configuration + * comment out the next line. + * See included "fw_env.config" sample file + * for notes on configuration. + */ +#define CONFIG_FILE "/etc/fw_env.config" + +#ifndef CONFIG_FILE +#define HAVE_REDUND /* For systems with 2 env sectors */ +#define DEVICE1_NAME "/dev/mtd1" +#define DEVICE2_NAME "/dev/mtd2" +#define DEVICE1_OFFSET 0x0000 +#define ENV1_SIZE 0x4000 +#define DEVICE1_ESIZE 0x4000 +#define DEVICE1_ENVSECTORS 2 +#define DEVICE2_OFFSET 0x0000 +#define ENV2_SIZE 0x4000 +#define DEVICE2_ESIZE 0x4000 +#define DEVICE2_ENVSECTORS 2 +#endif + +#ifndef CONFIG_BAUDRATE +#define CONFIG_BAUDRATE 115200 +#endif + +#ifndef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#ifndef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND \ + "bootp; " \ + "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} "\ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "\ + "bootm" +#endif diff --git a/tools/fdtgrep.c b/tools/fdtgrep.c index b907827..e373c43 100644 --- a/tools/fdtgrep.c +++ b/tools/fdtgrep.c @@ -810,9 +810,6 @@ static int do_fdtgrep(struct display_info *disp, const char *filename) disp->flags); if (count < 0) { report_error("fdt_find_regions", count); - if (count == -FDT_ERR_BADLAYOUT) - fprintf(stderr, - "/aliases node must come before all other nodes\n"); return -1; } if (count <= max_regions) diff --git a/tools/patman/cros_subprocess.py b/tools/patman/cros_subprocess.py index ebd4300..7c76014 100644 --- a/tools/patman/cros_subprocess.py +++ b/tools/patman/cros_subprocess.py @@ -190,6 +190,8 @@ class Popen(subprocess.Popen): # We will get an error on read if the pty is closed try: data = os.read(self.stdout.fileno(), 1024) + if isinstance(data, bytes): + data = data.decode('utf-8') except OSError: pass if data == "": @@ -205,6 +207,8 @@ class Popen(subprocess.Popen): # We will get an error on read if the pty is closed try: data = os.read(self.stderr.fileno(), 1024) + if isinstance(data, bytes): + data = data.decode('utf-8') except OSError: pass if data == "": |