summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/at91/sama5d3_devices.c24
-rw-r--r--arch/arm/include/asm/arch-at91/at91_common.h1
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9x5.h6
-rw-r--r--arch/arm/include/asm/arch-at91/sama5d3.h2
-rw-r--r--arch/arm/include/asm/arch-at91/sama5d3_smc.h2
-rw-r--r--board/atmel/at91sam9m10g45ek/config.mk1
-rw-r--r--board/atmel/at91sam9x5ek/config.mk1
-rw-r--r--board/atmel/sama5d3xek/sama5d3xek.c20
-rw-r--r--doc/README.atmel_pmecc14
-rw-r--r--drivers/gpio/at91_gpio.c295
-rw-r--r--drivers/mtd/nand/atmel_nand.c198
-rw-r--r--drivers/net/macb.c12
-rw-r--r--drivers/usb/musb-new/linux-compat.h16
-rw-r--r--include/configs/at91sam9m10g45ek.h2
-rw-r--r--include/configs/at91sam9n12ek.h3
-rw-r--r--include/configs/at91sam9x5ek.h5
-rw-r--r--include/configs/eb_cpux9k2.h62
-rw-r--r--include/configs/sama5d3xek.h10
-rw-r--r--include/linux/compat.h8
19 files changed, 486 insertions, 196 deletions
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
index 4a3fca5..e55e1c6 100644
--- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c
+++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
@@ -144,6 +144,30 @@ void at91_macb_hw_init(void)
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_EMAC);
}
+
+void at91_gmac_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */
+
+ at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */
+
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */
+ at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_GMAC);
+}
#endif
#ifdef CONFIG_LCD
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index d659702..9f54fdd 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -10,6 +10,7 @@
#define AT91_COMMON_H
void at91_can_hw_init(void);
+void at91_gmac_hw_init(void);
void at91_macb_hw_init(void);
void at91_mci_hw_init(void);
void at91_serial0_hw_init(void);
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index fcc6fdc..a471038 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -162,6 +162,12 @@
#define ATMEL_ID_UHP ATMEL_ID_UHPHS
/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512 0x8000
+#define ATMEL_PMECC_INDEX_OFFSET_1024 0x10000
+
+/*
* at91sam9x5 specific prototypes
*/
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h
index 49bd335..fefee5e 100644
--- a/arch/arm/include/asm/arch-at91/sama5d3.h
+++ b/arch/arm/include/asm/arch-at91/sama5d3.h
@@ -191,8 +191,6 @@
*/
#define ATMEL_PMECC_INDEX_OFFSET_512 0x10000
#define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000
-#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000
-#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000
/*
* SAMA5D3 specific prototypes
diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
index c060894..6caa9b6 100644
--- a/arch/arm/include/asm/arch-at91/sama5d3_smc.h
+++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
@@ -17,7 +17,6 @@
#define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C)
#else
struct at91_cs {
- u32 reserved[96];
u32 setup; /* 0x600 SMC Setup Register */
u32 pulse; /* 0x604 SMC Pulse Register */
u32 cycle; /* 0x608 SMC Cycle Register */
@@ -26,6 +25,7 @@ struct at91_cs {
};
struct at91_smc {
+ u32 reserved[384];
struct at91_cs cs[4];
};
#endif /* __ASSEMBLY__ */
diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk
deleted file mode 100644
index 9d3c5ae..0000000
--- a/board/atmel/at91sam9m10g45ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73f00000
diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk
deleted file mode 100644
index 6589a12..0000000
--- a/board/atmel/at91sam9x5ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x26f00000
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 4a309ad..97caf64 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -17,6 +17,7 @@
#include <lcd.h>
#include <atmel_lcdc.h>
#include <atmel_mci.h>
+#include <micrel.h>
#include <net.h>
#include <netdev.h>
@@ -178,6 +179,8 @@ int board_init(void)
#ifdef CONFIG_MACB
if (has_emac())
at91_macb_hw_init();
+ if (has_gmac())
+ at91_gmac_hw_init();
#endif
#ifdef CONFIG_LCD
if (has_lcdc())
@@ -193,6 +196,21 @@ int dram_init(void)
return 0;
}
+int board_phy_config(struct phy_device *phydev)
+{
+ /* rx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x2222);
+ /* tx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x2222);
+ /* rx/tx clock delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf2f4);
+
+ return 0;
+}
+
int board_eth_init(bd_t *bis)
{
int rc = 0;
@@ -200,6 +218,8 @@ int board_eth_init(bd_t *bis)
#ifdef CONFIG_MACB
if (has_emac())
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+ if (has_gmac())
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
#endif
return rc;
diff --git a/doc/README.atmel_pmecc b/doc/README.atmel_pmecc
index b483744..41f3bd7 100644
--- a/doc/README.atmel_pmecc
+++ b/doc/README.atmel_pmecc
@@ -19,17 +19,6 @@ To use PMECC in this driver, the user needs to set:
It can be 2, 4, 8, 12 or 24.
2. The PMECC sector size: CONFIG_PMECC_SECTOR_SIZE.
It only can be 512 or 1024.
- 3. The PMECC index lookup table's offsets in ROM code: CONFIG_PMECC_INDEX_TABLE_OFFSET.
- In the chip datasheet section "Boot Stragegies", you can find
- two Galois Field Table in the ROM code. One table is for 512-bytes
- sector. Another is for 1024-byte sector. Each Galois Field includes
- two sub-table: indext table & alpha table.
- In the beginning of each Galois Field Table is the index table,
- Alpha table is in the following.
- So the index table's offset is same as the Galois Field Table.
-
- Please set CONFIG_PMECC_INDEX_TABLE_OFFSET correctly according the
- Galois Field Table's offset base on the sector size you used.
Take AT91SAM9X5EK as an example, the board definition file likes:
@@ -38,7 +27,4 @@ Take AT91SAM9X5EK as an example, the board definition file likes:
#define CONFIG_ATMEL_NAND_HW_PMECC 1
#define CONFIG_PMECC_CAP 2
#define CONFIG_PMECC_SECTOR_SIZE 512
-#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
-NOTE: If you use 1024 as the sector size, then need set 0x10000 as the
- CONFIG_PMECC_INDEX_TABLE_OFFSET
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index 2322914..af09786 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -1,5 +1,5 @@
/*
- * Memory Setup stuff - taken from blob memsetup.S
+ * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
*
* Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
*
@@ -8,16 +8,6 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-/*
- * WARNING:
- *
- * As the code is right now, it expects all PIO ports A,B,C,...
- * to be evenly spaced in the memory map:
- * ATMEL_BASE_PIOA + port * sizeof at91pio_t
- * This might not necessaryly be true in future Atmel SoCs.
- * This code should be fixed to use a pointer array to the ports.
- */
-
#include <config.h>
#include <common.h>
#include <asm/io.h>
@@ -25,19 +15,42 @@
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
+static struct at91_port *at91_pio_get_port(unsigned port)
+{
+ switch (port) {
+ case AT91_PIO_PORTA:
+ return (struct at91_port *)ATMEL_BASE_PIOA;
+ case AT91_PIO_PORTB:
+ return (struct at91_port *)ATMEL_BASE_PIOB;
+ case AT91_PIO_PORTC:
+ return (struct at91_port *)ATMEL_BASE_PIOC;
+#if (ATMEL_PIO_PORTS > 3)
+ case AT91_PIO_PORTD:
+ return (struct at91_port *)ATMEL_BASE_PIOD;
+#if (ATMEL_PIO_PORTS > 4)
+ case AT91_PIO_PORTE:
+ return (struct at91_port *)ATMEL_BASE_PIOE;
+#endif
+#endif
+ default:
+ return NULL;
+ }
+}
+
int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
if (use_pullup)
- writel(1 << pin, &pio->port[port].puer);
+ writel(1 << pin, &at91_port->puer);
else
- writel(1 << pin, &pio->port[port].pudr);
- writel(mask, &pio->port[port].per);
+ writel(1 << pin, &at91_port->pudr);
+ writel(mask, &at91_port->per);
}
+
return 0;
}
@@ -46,15 +59,16 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
*/
int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
+ writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
- writel(mask, &pio->port[port].per);
+ writel(mask, &at91_port->per);
}
+
return 0;
}
@@ -63,23 +77,24 @@ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
*/
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
+ writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
#if defined(CPU_HAS_PIO3)
- writel(readl(&pio->port[port].abcdsr1) & ~mask,
- &pio->port[port].abcdsr1);
- writel(readl(&pio->port[port].abcdsr2) & ~mask,
- &pio->port[port].abcdsr2);
+ writel(readl(&at91_port->abcdsr1) & ~mask,
+ &at91_port->abcdsr1);
+ writel(readl(&at91_port->abcdsr2) & ~mask,
+ &at91_port->abcdsr2);
#else
- writel(mask, &pio->port[port].asr);
+ writel(mask, &at91_port->asr);
#endif
- writel(mask, &pio->port[port].pdr);
+ writel(mask, &at91_port->pdr);
}
+
return 0;
}
@@ -88,23 +103,24 @@ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
*/
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
+ writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
#if defined(CPU_HAS_PIO3)
- writel(readl(&pio->port[port].abcdsr1) | mask,
- &pio->port[port].abcdsr1);
- writel(readl(&pio->port[port].abcdsr2) & ~mask,
- &pio->port[port].abcdsr2);
+ writel(readl(&at91_port->abcdsr1) | mask,
+ &at91_port->abcdsr1);
+ writel(readl(&at91_port->abcdsr2) & ~mask,
+ &at91_port->abcdsr2);
#else
- writel(mask, &pio->port[port].bsr);
+ writel(mask, &at91_port->bsr);
#endif
- writel(mask, &pio->port[port].pdr);
+ writel(mask, &at91_port->pdr);
}
+
return 0;
}
@@ -114,19 +130,20 @@ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
*/
int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
+ writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
- writel(readl(&pio->port[port].abcdsr1) & ~mask,
- &pio->port[port].abcdsr1);
- writel(readl(&pio->port[port].abcdsr2) | mask,
- &pio->port[port].abcdsr2);
- writel(mask, &pio->port[port].pdr);
+ writel(readl(&at91_port->abcdsr1) & ~mask,
+ &at91_port->abcdsr1);
+ writel(readl(&at91_port->abcdsr2) | mask,
+ &at91_port->abcdsr2);
+ writel(mask, &at91_port->pdr);
}
+
return 0;
}
@@ -135,19 +152,20 @@ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
*/
int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
+ writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
- writel(readl(&pio->port[port].abcdsr1) | mask,
- &pio->port[port].abcdsr1);
- writel(readl(&pio->port[port].abcdsr2) | mask,
- &pio->port[port].abcdsr2);
- writel(mask, &pio->port[port].pdr);
+ writel(readl(&at91_port->abcdsr1) | mask,
+ &at91_port->abcdsr1);
+ writel(readl(&at91_port->abcdsr2) | mask,
+ &at91_port->abcdsr2);
+ writel(mask, &at91_port->pdr);
}
+
return 0;
}
#endif
@@ -158,16 +176,17 @@ int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
*/
int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
+ writel(mask, &at91_port->idr);
at91_set_pio_pullup(port, pin, use_pullup);
- writel(mask, &pio->port[port].odr);
- writel(mask, &pio->port[port].per);
+ writel(mask, &at91_port->odr);
+ writel(mask, &at91_port->per);
}
+
return 0;
}
@@ -177,20 +196,21 @@ int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
*/
int at91_set_pio_output(unsigned port, u32 pin, int value)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].idr);
- writel(mask, &pio->port[port].pudr);
+ writel(mask, &at91_port->idr);
+ writel(mask, &at91_port->pudr);
if (value)
- writel(mask, &pio->port[port].sodr);
+ writel(mask, &at91_port->sodr);
else
- writel(mask, &pio->port[port].codr);
- writel(mask, &pio->port[port].oer);
- writel(mask, &pio->port[port].per);
+ writel(mask, &at91_port->codr);
+ writel(mask, &at91_port->oer);
+ writel(mask, &at91_port->per);
}
+
return 0;
}
@@ -199,20 +219,21 @@ int at91_set_pio_output(unsigned port, u32 pin, int value)
*/
int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
if (is_on) {
#if defined(CPU_HAS_PIO3)
- writel(mask, &pio->port[port].ifscdr);
+ writel(mask, &at91_port->ifscdr);
#endif
- writel(mask, &pio->port[port].ifer);
+ writel(mask, &at91_port->ifer);
} else {
- writel(mask, &pio->port[port].ifdr);
+ writel(mask, &at91_port->ifdr);
}
}
+
return 0;
}
@@ -222,19 +243,20 @@ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
*/
int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
if (is_on) {
- writel(mask, &pio->port[port].ifscer);
- writel(div & PIO_SCDR_DIV, &pio->port[port].scdr);
- writel(mask, &pio->port[port].ifer);
+ writel(mask, &at91_port->ifscer);
+ writel(div & PIO_SCDR_DIV, &at91_port->scdr);
+ writel(mask, &at91_port->ifer);
} else {
- writel(mask, &pio->port[port].ifdr);
+ writel(mask, &at91_port->ifdr);
}
}
+
return 0;
}
@@ -244,17 +266,18 @@ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
*/
int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(mask, &pio->port[port].pudr);
+ writel(mask, &at91_port->pudr);
if (is_on)
- writel(mask, &pio->port[port].ppder);
+ writel(mask, &at91_port->ppder);
else
- writel(mask, &pio->port[port].ppddr);
+ writel(mask, &at91_port->ppddr);
}
+
return 0;
}
@@ -263,14 +286,15 @@ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
*/
int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- writel(readl(&pio->port[port].schmitt) | mask,
- &pio->port[port].schmitt);
+ writel(readl(&at91_port->schmitt) | mask,
+ &at91_port->schmitt);
}
+
return 0;
}
#endif
@@ -281,16 +305,17 @@ int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
*/
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
if (is_on)
- writel(mask, &pio->port[port].mder);
+ writel(mask, &at91_port->mder);
else
- writel(mask, &pio->port[port].mddr);
+ writel(mask, &at91_port->mddr);
}
+
return 0;
}
@@ -299,16 +324,17 @@ int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
*/
int at91_set_pio_value(unsigned port, unsigned pin, int value)
{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
if (value)
- writel(mask, &pio->port[port].sodr);
+ writel(mask, &at91_port->sodr);
else
- writel(mask, &pio->port[port].codr);
+ writel(mask, &at91_port->codr);
}
+
return 0;
}
@@ -317,13 +343,56 @@ int at91_set_pio_value(unsigned port, unsigned pin, int value)
*/
int at91_get_pio_value(unsigned port, unsigned pin)
{
- u32 pdsr = 0;
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
- u32 mask;
+ struct at91_port *at91_port = at91_pio_get_port(port);
+ u32 pdsr = 0, mask;
- if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (at91_port && (pin < 32)) {
mask = 1 << pin;
- pdsr = readl(&pio->port[port].pdsr) & mask;
+ pdsr = readl(&at91_port->pdsr) & mask;
}
+
return pdsr != 0;
}
+
+/* Common GPIO API */
+
+#define at91_gpio_to_port(gpio) (gpio / 32)
+#define at91_gpio_to_pin(gpio) (gpio % 32)
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+ return 0;
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+ at91_set_pio_input(at91_gpio_to_port(gpio),
+ at91_gpio_to_pin(gpio), 0);
+ return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ at91_set_pio_output(at91_gpio_to_port(gpio),
+ at91_gpio_to_pin(gpio), value);
+ return 0;
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ return at91_get_pio_value(at91_gpio_to_port(gpio),
+ at91_gpio_to_pin(gpio));
+}
+
+int gpio_set_value(unsigned gpio, int value)
+{
+ at91_set_pio_value(at91_gpio_to_port(gpio),
+ at91_gpio_to_pin(gpio), value);
+
+ return 0;
+}
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index f844990..96aca00 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -16,6 +16,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/at91_pio.h>
+#include <malloc.h>
#include <nand.h>
#include <watchdog.h>
@@ -50,13 +51,13 @@ struct atmel_nand_host {
void __iomem *pmecc_index_of;
/* data for pmecc computation */
- int16_t pmecc_smu[(CONFIG_PMECC_CAP + 2) * (2 * CONFIG_PMECC_CAP + 1)];
- int16_t pmecc_partial_syn[2 * CONFIG_PMECC_CAP + 1];
- int16_t pmecc_si[2 * CONFIG_PMECC_CAP + 1];
- int16_t pmecc_lmu[CONFIG_PMECC_CAP + 1]; /* polynomal order */
- int pmecc_mu[CONFIG_PMECC_CAP + 1];
- int pmecc_dmu[CONFIG_PMECC_CAP + 1];
- int pmecc_delta[CONFIG_PMECC_CAP + 1];
+ int16_t *pmecc_smu;
+ int16_t *pmecc_partial_syn;
+ int16_t *pmecc_si;
+ int16_t *pmecc_lmu; /* polynomal order */
+ int *pmecc_mu;
+ int *pmecc_dmu;
+ int *pmecc_delta;
};
static struct atmel_nand_host pmecc_host;
@@ -109,6 +110,48 @@ static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
table_size * sizeof(int16_t);
}
+static void pmecc_data_free(struct atmel_nand_host *host)
+{
+ free(host->pmecc_partial_syn);
+ free(host->pmecc_si);
+ free(host->pmecc_lmu);
+ free(host->pmecc_smu);
+ free(host->pmecc_mu);
+ free(host->pmecc_dmu);
+ free(host->pmecc_delta);
+}
+
+static int pmecc_data_alloc(struct atmel_nand_host *host)
+{
+ const int cap = host->pmecc_corr_cap;
+ int size;
+
+ size = (2 * cap + 1) * sizeof(int16_t);
+ host->pmecc_partial_syn = malloc(size);
+ host->pmecc_si = malloc(size);
+ host->pmecc_lmu = malloc((cap + 1) * sizeof(int16_t));
+ host->pmecc_smu = malloc((cap + 2) * size);
+
+ size = (cap + 1) * sizeof(int);
+ host->pmecc_mu = malloc(size);
+ host->pmecc_dmu = malloc(size);
+ host->pmecc_delta = malloc(size);
+
+ if (host->pmecc_partial_syn &&
+ host->pmecc_si &&
+ host->pmecc_lmu &&
+ host->pmecc_smu &&
+ host->pmecc_mu &&
+ host->pmecc_dmu &&
+ host->pmecc_delta)
+ return 0;
+
+ /* error happened */
+ pmecc_data_free(host);
+ return -ENOMEM;
+
+}
+
static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
{
struct nand_chip *nand_chip = mtd->priv;
@@ -622,6 +665,99 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
}
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+/*
+ * get_onfi_ecc_param - Get ECC requirement from ONFI parameters
+ * @ecc_bits: store the ONFI ECC correct bits capbility
+ * @sector_size: in how many bytes that ONFI require to correct @ecc_bits
+ *
+ * Returns -1 if ONFI parameters is not supported. In this case @ecc_bits,
+ * @sector_size are initialize to 0.
+ * Return 0 if success to get the ECC requirement.
+ */
+static int get_onfi_ecc_param(struct nand_chip *chip,
+ int *ecc_bits, int *sector_size)
+{
+ *ecc_bits = *sector_size = 0;
+
+ if (chip->onfi_params.ecc_bits == 0xff)
+ /* TODO: the sector_size and ecc_bits need to be find in
+ * extended ecc parameter, currently we don't support it.
+ */
+ return -1;
+
+ *ecc_bits = chip->onfi_params.ecc_bits;
+
+ /* The default sector size (ecc codeword size) is 512 */
+ *sector_size = 512;
+
+ return 0;
+}
+
+/*
+ * pmecc_choose_ecc - Get ecc requirement from ONFI parameters. If
+ * pmecc_corr_cap or pmecc_sector_size is 0, then set it as
+ * ONFI ECC parameters.
+ * @host: point to an atmel_nand_host structure.
+ * if host->pmecc_corr_cap is 0 then set it as the ONFI ecc_bits.
+ * if host->pmecc_sector_size is 0 then set it as the ONFI sector_size.
+ * @chip: point to an nand_chip structure.
+ * @cap: store the ONFI ECC correct bits capbility
+ * @sector_size: in how many bytes that ONFI require to correct @ecc_bits
+ *
+ * Return 0 if success. otherwise return the error code.
+ */
+static int pmecc_choose_ecc(struct atmel_nand_host *host,
+ struct nand_chip *chip,
+ int *cap, int *sector_size)
+{
+ /* Get ECC requirement from ONFI parameters */
+ *cap = *sector_size = 0;
+ if (chip->onfi_version) {
+ if (!get_onfi_ecc_param(chip, cap, sector_size)) {
+ MTDDEBUG(MTD_DEBUG_LEVEL1, "ONFI params, minimum required ECC: %d bits in %d bytes\n",
+ *cap, *sector_size);
+ } else {
+ dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n");
+ }
+ } else {
+ dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes");
+ }
+ if (*cap == 0 && *sector_size == 0) {
+ /* Non-ONFI compliant or use extended ONFI parameters */
+ *cap = 2;
+ *sector_size = 512;
+ }
+
+ /* If head file doesn't specify then use the one in ONFI parameters */
+ if (host->pmecc_corr_cap == 0) {
+ /* use the most fitable ecc bits (the near bigger one ) */
+ if (*cap <= 2)
+ host->pmecc_corr_cap = 2;
+ else if (*cap <= 4)
+ host->pmecc_corr_cap = 4;
+ else if (*cap <= 8)
+ host->pmecc_corr_cap = 8;
+ else if (*cap <= 12)
+ host->pmecc_corr_cap = 12;
+ else if (*cap <= 24)
+ host->pmecc_corr_cap = 24;
+ else
+ return -EINVAL;
+ }
+ if (host->pmecc_sector_size == 0) {
+ /* use the most fitable sector size (the near smaller one ) */
+ if (*sector_size >= 1024)
+ host->pmecc_sector_size = 1024;
+ else if (*sector_size >= 512)
+ host->pmecc_sector_size = 512;
+ else
+ return -EINVAL;
+ }
+ return 0;
+}
+#endif
+
static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
struct mtd_info *mtd)
{
@@ -635,9 +771,45 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
nand->ecc.correct = NULL;
nand->ecc.hwctl = NULL;
- cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP;
- sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
- host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET;
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+ host->pmecc_corr_cap = host->pmecc_sector_size = 0;
+
+#ifdef CONFIG_PMECC_CAP
+ host->pmecc_corr_cap = CONFIG_PMECC_CAP;
+#endif
+#ifdef CONFIG_PMECC_SECTOR_SIZE
+ host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
+#endif
+ /* Get ECC requirement of ONFI parameters. And if CONFIG_PMECC_CAP or
+ * CONFIG_PMECC_SECTOR_SIZE not defined, then use ecc_bits, sector_size
+ * from ONFI.
+ */
+ if (pmecc_choose_ecc(host, nand, &cap, &sector_size)) {
+ dev_err(host->dev, "The NAND flash's ECC requirement(ecc_bits: %d, sector_size: %d) are not support!",
+ cap, sector_size);
+ return -EINVAL;
+ }
+
+ if (cap > host->pmecc_corr_cap)
+ dev_info(host->dev, "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n",
+ host->pmecc_corr_cap, cap);
+ if (sector_size < host->pmecc_sector_size)
+ dev_info(host->dev, "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n",
+ host->pmecc_sector_size, sector_size);
+#else /* CONFIG_SYS_NAND_ONFI_DETECTION */
+ host->pmecc_corr_cap = CONFIG_PMECC_CAP;
+ host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
+#endif
+
+ cap = host->pmecc_corr_cap;
+ sector_size = host->pmecc_sector_size;
+
+ /* TODO: need check whether cap & sector_size is validate */
+
+ if (host->pmecc_sector_size == 512)
+ host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512;
+ else
+ host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024;
MTDDEBUG(MTD_DEBUG_LEVEL1,
"Initialize PMECC params, cap: %d, sector: %d\n",
@@ -691,6 +863,12 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
return 0;
}
+ /* Allocate data for PMECC computation */
+ if (pmecc_data_alloc(host)) {
+ dev_err(host->dev, "Cannot allocate memory for PMECC computation!\n");
+ return -ENOMEM;
+ }
+
nand->ecc.read_page = atmel_nand_pmecc_read_page;
nand->ecc.write_page = atmel_nand_pmecc_write_page;
nand->ecc.strength = cap;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 1f7cc32..bf3983a 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -36,6 +36,7 @@
#include <asm/io.h>
#include <asm/dma-mapping.h>
#include <asm/arch/clk.h>
+#include <asm-generic/errno.h>
#include "macb.h"
@@ -397,9 +398,14 @@ static int macb_phy_init(struct macb_device *macb)
}
#ifdef CONFIG_PHYLIB
- phydev->bus = macb->bus;
- phydev->dev = netdev;
- phydev->addr = macb->phy_addr;
+ /* need to consider other phy interface mode */
+ phydev = phy_connect(macb->bus, macb->phy_addr, netdev,
+ PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ printf("phy_connect failed\n");
+ return -ENODEV;
+ }
+
phy_config(phydev);
#endif
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
index 72c8c2b..d7a5663 100644
--- a/drivers/usb/musb-new/linux-compat.h
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -39,15 +39,6 @@ typedef unsigned long dmaaddr_t;
#define cpu_relax() do {} while (0)
#define pr_debug(fmt, args...) debug(fmt, ##args)
-#define dev_dbg(dev, fmt, args...) \
- debug(fmt, ##args)
-#define dev_vdbg(dev, fmt, args...) \
- debug(fmt, ##args)
-#define dev_info(dev, fmt, args...) \
- printf(fmt, ##args)
-#define dev_err(dev, fmt, args...) \
- printf(fmt, ##args)
-#define printk printf
#define WARN(condition, fmt, args...) ({ \
int ret_warn = !!condition; \
@@ -55,13 +46,6 @@ typedef unsigned long dmaaddr_t;
printf(fmt, ##args); \
ret_warn; })
-#define KERN_DEBUG
-#define KERN_NOTICE
-#define KERN_WARNING
-#define KERN_ERR
-
-#define kfree(ptr) free(ptr)
-
#define pm_runtime_get_sync(dev) do {} while (0)
#define pm_runtime_put(dev) do {} while (0)
#define pm_runtime_put_sync(dev) do {} while (0)
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 2aea555..fc4ecec 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -13,6 +13,8 @@
#include <asm/hardware.h>
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
+
#define CONFIG_AT91_LEGACY
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index be8a28c..28a7925 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -122,6 +122,9 @@
#define CONFIG_PMECC_CAP 2
#define CONFIG_PMECC_SECTOR_SIZE 512
#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
+
+#define CONFIG_CMD_NAND_TRIMFFS
+
#endif
#define CONFIG_MTD_PARTITIONS
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 2b1533c..4a2ac9a 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -11,6 +11,8 @@
#include <asm/hardware.h>
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
@@ -121,7 +123,8 @@
#define CONFIG_ATMEL_NAND_HW_PMECC 1
#define CONFIG_PMECC_CAP 2
#define CONFIG_PMECC_SECTOR_SIZE 512
-#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
+
+#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_MTD_DEVICE
#define CONFIG_CMD_MTDPARTS
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 247e37b..ccc7bd0 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -39,6 +39,7 @@
#define CONFIG_SYS_TEXT_BASE 0x21f00000
#endif
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000
#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
@@ -123,41 +124,40 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
-#define CONFIG_I2C_CMD_NO_FLAT
#define CONFIG_I2C_CMD_TREE
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
-
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_UBIFS
#define CONFIG_SYS_LONGHELP
/*
- * Filesystems
+ * MTD defines
*/
-#define CONFIG_JFFS2_NAND 1
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
-#ifndef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV "nand0"
-#define CONFIG_JFFS2_PART_OFFSET 0
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#else
-#define MTDIDS_DEFAULT "nor0=0,nand0=1"
+#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
#define MTDPARTS_DEFAULT "mtdparts=" \
- "0:" \
- "384k(U-Boot)," \
- "128k(Env)," \
- "128k(Splash)," \
- "4M(Kernel)," \
- "-(FS)" \
+ "physmap-flash.0:" \
+ "512k(U-Boot)," \
+ "128k(Env)," \
+ "128k(Splash)," \
+ "4M(Kernel)," \
+ "384k(MiniFS)," \
+ "-(FS)" \
";" \
- "1:" \
- "-(jffs2)"
-#endif /* CONFIG_JFFS2_CMDLINE */
-
+ "atmel_nand:" \
+ "1M(emergency)," \
+ "-(data)"
/*
* Hardware drivers
*/
@@ -328,7 +328,7 @@
#define CONFIG_BOOTDELAY 5
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000)
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000)
#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
#define CONFIG_BAUDRATE 115200
@@ -347,12 +347,14 @@
"displayheight=512\0" \
"displaybsteps=1023\0" \
"ubootaddr=10000000\0" \
- "splashimage=10080000\0" \
- "kerneladdr=100A0000\0" \
+ "splashimage=100A0000\0" \
+ "kerneladdr=100C0000\0" \
"kernelsize=00400000\0" \
- "rootfsaddr=104A0000\0" \
+ "rootfsaddr=10520000\0" \
"copy_addr=21200000\0" \
- "rootfssize=00B60000\0" \
+ "rootfssize=00AE0000\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
"bootargsdefaults=set bootargs " \
"console=ttyS0,115200 " \
"video=vcxk_fb:xres:${displaywidth}," \
@@ -373,15 +375,15 @@
"erase $(rootfsaddr) +$(rootfssize);" \
"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
"\0" \
- "update_uboot=protect off 10000000 1005FFFF;" \
+ "update_uboot=protect off 10000000 1007FFFF;" \
"dhcp $(copy_addr) u-boot_eb_cpux9k2;" \
- "erase 10000000 1005FFFF;" \
+ "erase 10000000 1007FFFF;" \
"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
- "protect on 10000000 1005FFFF;reset\0" \
+ "protect on 10000000 1007FFFF;reset\0" \
"update_splash=protect off $(splashimage) +20000;" \
"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \
"erase $(splashimage) +20000;" \
- "cp.b $(fileaddr) 10080000 $(filesize);" \
+ "cp.b $(fileaddr) $(splashimage) $(filesize);" \
"protect on $(splashimage) +20000;reset\0" \
"emergency=run bootargsdefaults;" \
"set bootargs $(bootargs) root=initramfs boot=emergency " \
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 10697d6..4099198 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -56,7 +56,6 @@
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 24
#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
@@ -112,7 +111,6 @@
#define CONFIG_CMD_NAND
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MAX_CHIPS 1
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
@@ -126,7 +124,6 @@
#define CONFIG_ATMEL_NAND_HW_PMECC
#define CONFIG_PMECC_CAP 4
#define CONFIG_PMECC_SECTOR_SIZE 512
-#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512
#define CONFIG_CMD_NAND_TRIMFFS
#endif
@@ -136,6 +133,11 @@
#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_RGMII
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
/* MMC */
#define CONFIG_CMD_MMC
@@ -195,7 +197,7 @@
"bootm 0x22000000 - 0x21000000"
#define CONFIG_SYS_MMC_ENV_DEV 0
#else
-#define CONIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
#endif
#ifdef CONFIG_SYS_USE_MMC
diff --git a/include/linux/compat.h b/include/linux/compat.h
index e1338bf..3fdfb39 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -3,6 +3,14 @@
#define ndelay(x) udelay(1)
+#define dev_dbg(dev, fmt, args...) \
+ debug(fmt, ##args)
+#define dev_vdbg(dev, fmt, args...) \
+ debug(fmt, ##args)
+#define dev_info(dev, fmt, args...) \
+ printf(fmt, ##args)
+#define dev_err(dev, fmt, args...) \
+ printf(fmt, ##args)
#define printk printf
#define KERN_EMERG