summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG7
-rw-r--r--board/integratorcp/flash.c235
-rw-r--r--board/omap2420h4/config.mk1
-rw-r--r--board/omap2420h4/mem.c22
-rw-r--r--board/omap2420h4/omap2420h4.c6
-rw-r--r--board/omap2420h4/platform.S1
-rw-r--r--board/omap2420h4/sys_info.c3
-rw-r--r--examples/README.smc91111_eeprom246
-rw-r--r--examples/smc91111_eeprom.c391
-rw-r--r--include/configs/integratorcp.h49
-rw-r--r--include/configs/omap2420h4.h6
11 files changed, 851 insertions, 116 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 3f62469..6ae7c78 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Patch by Robin Getz, 13 Oct 2004:
+ Add standalone application to change SMC91C111 MAC addresses,
+ see examples/README.smc91111_eeprom
+
+* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
+ Fix Flash support for ARM Integrator CP.
+
* Patch by Richard Woodruff, 10 Jan 2005:
Update support for OMAP2420 (ARM11) and H4 board:
o clean up and add new types to H4 memory probe code.
diff --git a/board/integratorcp/flash.c b/board/integratorcp/flash.c
index b120d63..4d6eff0 100644
--- a/board/integratorcp/flash.c
+++ b/board/integratorcp/flash.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2004
+ * Xiaogeng (Shawn) Jin, Agilent Technologies, xiaogeng_jin@agilent.com
+ *
* (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
@@ -31,20 +34,22 @@
#include <common.h>
#include <linux/byteorder/swab.h>
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+#define DEBUG
+
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
#define SWAP(x) __swab16(x)
#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
#define SWAP(x) __swab32(x)
#endif
@@ -67,6 +72,12 @@ OrgDef OrgIntel_28F256L18T[] = {
{255, 128 * 1024}, /* 255 * 128kBytes sectors */
};
+/* CP control register base address */
+#define CPCR_BASE 0xCB000000
+#define CPCR_EXTRABANK 0x8
+#define CPCR_FLASHSIZE 0x4
+#define CPCR_FLWREN 0x2
+#define CPCR_FLVPPEN 0x1
/*-----------------------------------------------------------------------
* Functions
@@ -83,29 +94,50 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
/*-----------------------------------------------------------------------
*/
-
unsigned long flash_init (void)
{
- int i;
+ int i, nbanks;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
+ vu_long *cpcr = (vu_long *)CPCR_BASE;
+
+ /* Check if there is an extra bank of flash */
+ if (cpcr[1] & CPCR_EXTRABANK)
+ nbanks = 2;
+ else
+ nbanks = 1;
+
+ if (nbanks > CFG_MAX_FLASH_BANKS)
+ nbanks = CFG_MAX_FLASH_BANKS;
+
+ /* Enable flash write */
+ cpcr[1] |= 3;
+
+ for (i = 0; i < nbanks; i++) {
+ flash_get_size ((FPW *)(CFG_FLASH_BASE + size), &flash_info[i]);
+ flash_get_offsets (CFG_FLASH_BASE + size, &flash_info[i]);
size += flash_info[i].size;
}
- /* Protect monitor and environment sectors
- */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /* Protect SIB (0x24800000) and bootMonitor (0x24c00000) */
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+ flash_info[0].start[62],
+ flash_info[0].start[63] + PHYS_FLASH_SECT_SIZE - 1,
+ &flash_info[0]);
return size;
}
@@ -115,23 +147,15 @@ unsigned long flash_init (void)
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
- OrgDef *pOrgDef;
- pOrgDef = OrgIntel_28F256L18T;
if (info->flash_id == FLASH_UNKNOWN) {
return;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
for (i = 0; i < info->sector_count; i++) {
- if (i > 255) {
- info->start[i] = base + (i * 0x8000);
- info->protect[i] = 0;
- } else {
- info->start[i] = base +
- (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
}
}
}
@@ -156,10 +180,20 @@ void flash_print_info (flash_info_t * info)
break;
}
+ /* Integrator CP board uses 28F640J3C or 28F128J3C parts,
+ * which have the same device id numbers as 28F640J3A or
+ * 28F128J3A
+ */
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F256L18T:
printf ("FLASH 28F256L18T\n");
break;
+ case FLASH_28F640J3A:
+ printf ("FLASH 28F640J3C\n");
+ break;
+ case FLASH_28F128J3A:
+ printf ("FLASH 28F128J3C\n");
+ break;
default:
printf ("Unknown Chip Type\n");
break;
@@ -185,6 +219,17 @@ void flash_print_info (flash_info_t * info)
static ulong flash_get_size (FPW * addr, flash_info_t * info)
{
volatile FPW value;
+ vu_long *cpcr = (vu_long *)CPCR_BASE;
+ int nsects;
+
+ /* Check the flash size */
+ if (cpcr[1] & CPCR_FLASHSIZE)
+ nsects = 128;
+ else
+ nsects = 64;
+
+ if (nsects > CFG_MAX_FLASH_SECT)
+ nsects = CFG_MAX_FLASH_SECT;
/* Write auto select command: read Manufacturer ID */
addr[0x5555] = (FPW) 0x00AA00AA;
@@ -204,19 +249,31 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
}
mb ();
- value = addr[1]; /* device ID */
+ value = addr[1]; /* device ID */
switch (value) {
case (FPW) (INTEL_ID_28F256L18T):
info->flash_id += FLASH_28F256L18T;
info->sector_count = 259;
info->size = 0x02000000;
- break; /* => 32 MB */
+ break; /* => 32 MB */
+
+ case (FPW) (INTEL_ID_28F640J3A):
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = nsects;
+ info->size = nsects * PHYS_FLASH_SECT_SIZE;
+ break;
+
+ case (FPW) (INTEL_ID_28F128J3A):
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = nsects;
+ info->size = nsects * PHYS_FLASH_SECT_SIZE;
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
@@ -241,23 +298,32 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
*/
void flash_unprotect_sectors (FPWV * addr)
{
-#define PD_FINTEL_WSMS_READY_MASK 0x0080
+ FPW status;
*addr = (FPW) 0x00500050; /* clear status register */
/* this sends the clear lock bit command */
*addr = (FPW) 0x00600060;
*addr = (FPW) 0x00D000D0;
+
+ reset_timer_masked();
+ while (((status = *addr) & (FPW)0x00800080) != 0x00800080) {
+ if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout");
+ break;
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF;
}
/*-----------------------------------------------------------------------
*/
-
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag, prot, sect;
- ulong type, start, last;
+ ulong type;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
@@ -290,13 +356,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf ("\n");
}
-
- start = get_timer (0);
- last = start;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
@@ -305,36 +364,53 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
printf ("Erasing sector %2d ... ", sect);
- flash_unprotect_sectors (addr);
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ /* flash_unprotect_sectors (addr); */
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
- *addr = (FPW) 0x00500050;/* clear status register */
- *addr = (FPW) 0x00200020;/* erase setup */
- *addr = (FPW) 0x00D000D0;/* erase confirm */
-
- while (((status =
- *addr) & (FPW) 0x00800080) !=
- (FPW) 0x00800080) {
- if (get_timer_masked () >
- CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- /* reset to read mode */
- *addr = (FPW) 0x00FF00FF;
- rcode = 1;
- break;
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+ mb();
+
+ udelay(1000); /* Let's wait 1 ms */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ *addr = (FPW)0x00700070;
+ status = *addr;
+ if ((status & (FPW) 0x00400040) == (FPW) 0x00400040) {
+ /* erase suspended? Resume it */
+ reset_timer_masked();
+ *addr = (FPW) 0x00D000D0;
+ } else {
+#ifdef DEBUG
+ printf ("Timeout,0x%08x\n", status);
+#else
+ printf("Timeout\n");
+#endif
+
+ *addr = (FPW) 0x00500050;
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
}
}
- /* clear status register cmd. */
- *addr = (FPW) 0x00500050;
- *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ *addr = (FPW) 0x00FF00FF; /* resest to read mode */
printf (" done\n");
}
}
+
return rcode;
}
@@ -345,7 +421,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
* 2 - Flash not erased
* 4 - Flash not identified
*/
-
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp;
@@ -443,23 +518,39 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
- flash_unprotect_sectors (addr);
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
+
+ /* flash_unprotect_sectors (addr); */
+
*addr = (FPW) 0x00400040; /* write setup */
*addr = data;
+ mb();
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
+#ifdef DEBUG
+ *addr = (FPW) 0x00700070;
+ status = *addr;
+ printf("## status=0x%08x, addr=0x%08x\n", status, addr);
+#endif
+ *addr = (FPW) 0x00500050; /* clear status register cmd */
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
}
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
return (0);
}
diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk
index f2a533e..e6aa756 100644
--- a/board/omap2420h4/config.mk
+++ b/board/omap2420h4/config.mk
@@ -20,4 +20,3 @@ TEXT_BASE = 0x80e80000
# This is either with a GP system or a signed boot image.
# easiest, and safest way to go if you can.
#TEXT_BASE = 0x40280000
-
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
index 3ce38cc..9ae595b 100644
--- a/board/omap2420h4/mem.c
+++ b/board/omap2420h4/mem.c
@@ -74,9 +74,9 @@ void prcm_init(void)
if(running_in_sram()){
/* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
- * but then comes back. If running from Flash this sequence kills you, thus you need
- * to run it using CONFIG_PARTIAL_SRAM.
- */
+ * but then comes back. If running from Flash this sequence kills you, thus you need
+ * to run it using CONFIG_PARTIAL_SRAM.
+ */
__raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
sdelay(1000);
@@ -172,14 +172,13 @@ void do_sdrc_init(u32 offset, u32 early)
cpu = get_cpu_type();
/* warning generated, though code generation is correct. this may bite later,
- * but is ok for now. there is only so much C code you can do on stack only
- * operation.
+ * but is ok for now. there is only so much C code you can do on stack only
+ * operation.
*/
if (cpu == CPU_2422){
sdata = (sdrc_data_t *)&sdrc_2422;
pass_type = STACKED;
- }
- else{
+ } else{
sdata = (sdrc_data_t *)&sdrc_2420;
pass_type = IP_DDR;
}
@@ -187,10 +186,10 @@ void do_sdrc_init(u32 offset, u32 early)
__asm__ __volatile__("": : :"memory"); /* limit compiler scope */
/* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx.
- * If we are running in flash prior to relocation and we use data
- * here which is not pc relative we need to get the address correct.
- * We need to find the current flash mapping to dress up the initial
- * pointer load. As long as this is const data we should be ok.
+ * If we are running in flash prior to relocation and we use data
+ * here which is not pc relative we need to get the address correct.
+ * We need to find the current flash mapping to dress up the initial
+ * pointer load. As long as this is const data we should be ok.
*/
if((early) && running_in_flash()){
sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
@@ -344,4 +343,3 @@ void gpmc_init(void)
__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
sdelay(2000);
}
-
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 697dfef..8c7982d 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -36,7 +36,6 @@
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
-
static void wait_for_command_complete(unsigned int wd_base);
/*******************************************************
@@ -694,8 +693,6 @@ void muxSetupGPMC(void)
/* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
*MuxConfigReg = 0x00 ;
-
-
}
/****************************************************************
@@ -860,6 +857,3 @@ void nand_init(void)
#endif
}
#endif
-
-
-
diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S
index 86bf5ba..73ba462 100644
--- a/board/omap2420h4/platform.S
+++ b/board/omap2420h4/platform.S
@@ -183,4 +183,3 @@ VAL_INTH_SETUP:
.word PERIFERAL_PORT_BASE
SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK
-
diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c
index 78b936c..121d679 100644
--- a/board/omap2420h4/sys_info.c
+++ b/board/omap2420h4/sys_info.c
@@ -251,8 +251,6 @@ static u32 get_base2(void)
return(val);
}
-
-
/********************************************************
* running_in_flash() - tell if currently running in
* flash.
@@ -302,4 +300,3 @@ u32 running_from_internal_boot(void)
else
return(0);
}
-
diff --git a/examples/README.smc91111_eeprom b/examples/README.smc91111_eeprom
new file mode 100644
index 0000000..28e7e69
--- /dev/null
+++ b/examples/README.smc91111_eeprom
@@ -0,0 +1,246 @@
+This is the readme for the Das U-Boot standalone program smc91111
+
+The main purpose of this is to manage MAC addresses on platforms
+which include the SMC91111 integrated 10/100 MAC Phy, with attached
+EEPROMs.
+
+
+Contents:
+------------------------
+1. Ensuring U-boot's MAC address can be set in hardware
+2. Running the smc91111_eeprom program
+3. Setting MAC addresses
+4. Other things you can do with this
+5. Things to be done.
+
+
+1. Ensuring U-boot's MAC address can be set in hardware
+--------------------------------------------------------------------------
+
+On the Internet - MAC addresses are very important. Short for Media
+Access Control address, a hardware address that uniquely identifies
+each node of a network. When things are not unique - bad things
+can happen. This is why U-Boot makes it difficult to change MAC
+addresses.
+
+To find out who has a MAC address, or to purchase MAC addresses, goto
+the IEEE, at:
+http://standards.ieee.org/regauth/oui/index.shtml
+
+To change your MAC address, there can not be a MAC address predefined in
+U-Boot. To ensure that this does not occur, check your
+include/configs/<board_name>.h file, and check to see that the following
+settings are _not_ or commented out there.
+
+#define HARDCODE_MAC 1
+#define CONFIG_ETHADDR 02:80:ad:20:31:b8
+
+The purpose of HARDCODE_MAC is to hardcode the MAC address in software,
+(not what we want), or to preset it to 02:80:ad:20:31:b8 (not what we
+want either).
+
+You can check this in a running U-Boot, by doing a power cycle, then
+before U-Boot tries to do any networking, running the 'printenv' command
+
+ BOOT> printenv
+
+ ethaddr=02:80:ad:20:31:b8
+
+If you see the 'ethaddr' variable show up, like the above, you need to
+recompile U-Boot, with the above settings commented out of the
+include/configs/<board_name>.h file.
+
+2. Running the smc91111_eeprom program
+---------------------------------------------------------------------
+
+After Uboot is compiled, there should be three files of interest:
+-rwxr-xr-x 1 8806 2004-10-11 14:00 smc91111_eeprom <- ELF
+-rwxr-xr-x 1 3440 2004-10-11 14:00 smc91111_eeprom.bin <- BIN
+-rwxr-xr-x 1 9524 2004-10-11 14:00 smc91111_eeprom.srec <- SREC
+
+if there is not, check the examples/Makefile, and ensure there is something
+like for your architecture:
+
+ ifeq ($(ARCH),blackfin)
+ SREC += smc91111_eeprom.srec
+ BIN += smc91111_eeprom.bin smc91111_eeprom
+ endif
+
+To load the files: there are two methods: a) serial or b) network. Since
+it is not a good idea to start doing things on the network before the
+MAC address is set, this example will do things over serial.
+
+a) Loading the elf file via the serial port
+--------------------------------------------
+Loading the elf is very easy - just ensure that the location
+you specify things to load as is not the load address specified
+in the Makefile.
+
+BOOT> loadb 0x1000000
+
+## Ready for binary (kermit) download to 0x01000000 at 57600 bps...
+
+(type CNTL-\ then C)
+(Back at local machine)
+----------------------------------------------------
+Kermit>send ~/u-boot_1.1.1/examples/smc91111_eeprom
+Kermit>connect
+
+Connecting to /dev/ttyS0, speed 57600
+ Escape character: Ctrl-\ (ASCII 28, FS): enabled
+Type the escape character followed by C to get back,
+or followed by ? to see other options.
+----------------------------------------------------
+## Total Size = 0x00002266 = 8806 Bytes
+## Start Addr = 0x01000000
+
+BOOT> bootelf 0x1000000
+
+Loading .text @ 0x00001000 (3440 bytes)
+## Starting application at 0x000010d8 ...
+
+SMC91111>
+
+b) Loading the binary file via the serial port
+-----------------------------------------------
+For many toolchains, the entry point is not the load point.
+The Load point is a hard coded address from the
+examples/Makefile. The entry point can be found by doing something
+like:
+
+ u-boot_1.1.1/examples> bfin-elf-objdump -d smc91111_eeprom |less
+
+ smc91111_eeprom: file format elf32-bfin
+
+ Disassembly of section .text:
+
+ 00001000 <smc91111_eeprom-0xd8>:
+ 1000:
+ 000010d8 <smc91111_eeprom>:
+
+You can see that the entry point (or the address that should be
+jumped to is 0x10d8). This is also the same as the entry point
+of the elf file.
+
+Now we load it to the actual load location:
+
+BOOT> loadb 0x1000
+
+## Ready for binary (kermit) download to 0x00001000 at 57600 bps...
+
+(Back at pinky.dsl-only.net)
+----------------------------------------------------
+Kermit>send /tftpboot/eeprom.bin
+Kermit>connect
+
+Connecting to /dev/ttyS0, speed 57600
+ Escape character: Ctrl-\ (ASCII 28, FS): enabled
+Type the escape character followed by C to get back,
+or followed by ? to see other options.
+----------------------------------------------------
+## Total Size = 0x00000d70 = 3440 Bytes
+## Start Addr = 0x00001000
+
+BOOT> go 0x10D8
+
+## Starting application at 0x000010D8 ...
+
+SMC91111>
+
+3. Setting MAC addresses
+--------------------------------------------------------------------------
+
+The MAC address can be stored in four locations:
+
+-Boot environmental variable in Flash <- can not change, without
+ re-flashing U-boot.
+U-Boot environental variable <- can not change, without
+ resetting board/U-Boot
+LAN91C111 Registers <- volitle
+LAN91C111 EEPROM <- Non Volitle
+
+If you have not activated the network, and do not have a hardcoded
+or pre-assigned MAC address in U-boot, the environmental variables
+should be blank, and allow you to set things one time.
+
+To set the EEPROM MAC address to 12:34:56:78:9A:BC
+
+SMC91111> W E 20 3412
+
+Writing EEPROM register 20 with 3412
+SMC91111> W E 21 7856
+
+Writing EEPROM register 21 with 7856
+SMC91111> W E 22 BC9A
+
+Writing EEPROM register 22 with bc9a
+EEPROM contents copied to MAC
+SMC91111> P
+
+Current MAC Address in SMSC91111 12:34:56:78:9a:bc
+Current MAC Address in EEPROM 12:34:56:78:9a:bc
+
+(CNTRL-C to exit)
+SMC91111> ## Application terminated, rc = 0x0
+
+BOOT> reset
+U-Boot 1.1.1 (gcc version: 3.3.3)
+Release Version Beta released on Oct 10 2004 - 00:34:35
+Blackfin support by LG Soft India
+For further information please check this link http://www.blackfin.uclinux.org
+BOOT> ping 192.168.0.4
+
+Using MAC Address 12:34:56:78:9A:BC
+host 192.168.0.4 is alive
+
+
+4. Other things that you can do
+--------------------------------------------------------------------------
+After the stand alone application is running, there are a few options:
+ - P : Print the MAC
+ - D : Dump the LAN91C111 EEPROM contents
+ - M : Dump the LAN91C111 MAC contents
+ - C : Copies the MAC address from the EEPROM to the LAN91C111
+ - W : Write a register in the EEPROM or in the MAC
+
+SMC91111> P
+
+Current MAC Address in SMSC91111 12:34:56:78:9a:bc
+Current MAC Address in EEPROM 12:34:56:78:9a:bc
+
+SMC91111> D
+
+IOS2-0 000 001 002 003 004 005 006 007
+CONFIG 00:ffff 04:ffff 08:ffff 0c:ffff 10:ffff 14:ffff 18:ffff 1c:ffff
+BASE 01:ffff 05:ffff 09:ffff 0d:ffff 11:ffff 15:ffff 19:ffff 1d:ffff
+ 02:ffff 06:ffff 0a:ffff 0e:0020 12:ffff 16:ffff 1a:ffff 1e:ffff
+ 03:ffff 07:ffff 0b:ffff 0f:ffff 13:ffff 17:ffff 1b:ffff 1f:ffff
+
+20:3412 21:7856 22:bc9a 23:ffff 24:ffff 25:ffff 26:ffff 27:ffff
+28:ffff 29:ffff 2a:ffff 2b:ffff 2c:ffff 2d:ffff 2e:ffff 2f:ffff
+30:ffff 31:ffff 32:ffff 33:ffff 34:ffff 35:ffff 36:ffff 37:ffff
+38:ffff 39:ffff 3a:ffff 3b:ffff 3c:ffff 3d:ffff 3e:ffff 3f:ffff
+
+SMC91111> M
+
+ Bank0 Bank1 Bank2 Bank3
+00 0000 a0b1 3332 0000
+02 0000 1801 8000 0000
+04 0000 3412 8080 0000
+06 0000 7856 003f 0000
+08 0404 bc9a 02df 3332
+0a 0000 ffff 02df 3391
+0c 0000 1214 0004 001f
+0e 3300 3301 3302 3303
+
+SMC91111> C
+
+EEPROM contents copied to MAC
+
+SMC91111> W E 2A ABCD
+
+Writing EEPROM register 2a with abcd
+
+SMC91111> W M 14 FF00
+
+Writing MAC register bank 1, reg 04 with ff00
diff --git a/examples/smc91111_eeprom.c b/examples/smc91111_eeprom.c
new file mode 100644
index 0000000..885f933
--- /dev/null
+++ b/examples/smc91111_eeprom.c
@@ -0,0 +1,391 @@
+/*
+ * (C) Copyright 2004
+ * Robin Getz rgetz@blacfin.uclinux.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Heavily borrowed from the following peoples GPL'ed software:
+ * - Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * Das U-boot
+ * - Ladislav Michl ladis@linux-mips.org
+ * A rejected patch on the U-Boot mailing list
+ */
+
+#include <common.h>
+#include <exports.h>
+#include "../drivers/smc91111.h"
+
+#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
+#define EEPROM 0x1;
+#define MAC 0x2;
+#define UNKNOWN 0x4;
+
+void dump_reg (void);
+void dump_eeprom (void);
+int write_eeprom_reg (int, int);
+void copy_from_eeprom (void);
+void print_MAC (void);
+int read_eeprom_reg (int);
+void print_macaddr (void);
+
+int smc91111_eeprom (int argc, char *argv[])
+{
+ int c, i, j, done, line, reg, value, start, what;
+ char input[50];
+
+ /* Print the ABI version */
+ app_startup (argv);
+ if (XF_VERSION != (int) get_version ()) {
+ printf ("Expects ABI version %d\n", XF_VERSION);
+ printf ("Actual U-Boot ABI version %d\n",
+ (int) get_version ());
+ printf ("Can't run\n\n");
+ return (0);
+ }
+
+ asm ("p2.h = 0xFFC0;");
+ asm ("p2.l = 0x0730;");
+ asm ("r0 = 0x01;");
+ asm ("w[p2] = r0;");
+ asm ("ssync;");
+
+ asm ("p2.h = 0xffc0;");
+ asm ("p2.l = 0x0708;");
+ asm ("r0 = 0x01;");
+ asm ("w[p2] = r0;");
+ asm ("ssync;");
+
+ if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) {
+ printf ("Can't find SMSC91111\n");
+ return (0);
+ }
+
+ done = 0;
+ what = UNKNOWN;
+ printf ("\n");
+ while (!done) {
+ /* print the prompt */
+ printf ("SMC91111> ");
+ line = 0;
+ i = 0;
+ start = 1;
+ while (!line) {
+ /* Wait for a keystroke */
+ while (!tstc ());
+
+ c = getc ();
+ /* Make Uppercase */
+ if (c >= 'Z')
+ c -= ('a' - 'A');
+ /* printf(" |%02x| ",c); */
+
+ switch (c) {
+ case '\r': /* Enter */
+ case '\n':
+ input[i] = 0;
+ puts ("\r\n");
+ line = 1;
+ break;
+ case '\0': /* nul */
+ continue;
+
+ case 0x03: /* ^C - break */
+ input[0] = 0;
+ i = 0;
+ line = 1;
+ done = 1;
+ break;
+
+ case 0x5F:
+ case 0x08: /* ^H - backspace */
+ case 0x7F: /* DEL - backspace */
+ if (i > 0) {
+ puts ("\b \b");
+ i--;
+ }
+ break;
+ default:
+ if (start) {
+ if ((c == 'W') || (c == 'D')
+ || (c == 'M') || (c == 'C')
+ || (c == 'P')) {
+ putc (c);
+ input[i] = c;
+ if (i <= 45)
+ i++;
+ start = 0;
+ }
+ } else {
+ if ((c >= '0' && c <= '9')
+ || (c >= 'A' && c <= 'F')
+ || (c == 'E') || (c == 'M')
+ || (c == ' ')) {
+ putc (c);
+ input[i] = c;
+ if (i <= 45)
+ i++;
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ for (; i < 49; i++)
+ input[i] = 0;
+
+ switch (input[0]) {
+ case ('W'):
+ /* Line should be w reg value */
+ i = 0;
+ reg = 0;
+ value = 0;
+ /* Skip to the next space or end) */
+ while ((input[i] != ' ') && (input[i] != 0))
+ i++;
+
+ if (input[i] != 0)
+ i++;
+
+ /* Are we writing to EEPROM or MAC */
+ switch (input[i]) {
+ case ('E'):
+ what = EEPROM;
+ break;
+ case ('M'):
+ what = MAC;
+ break;
+ default:
+ what = UNKNOWN;
+ break;
+ }
+
+ /* skip to the next space or end */
+ while ((input[i] != ' ') && (input[i] != 0))
+ i++;
+ if (input[i] != 0)
+ i++;
+
+ /* Find register to write into */
+ j = 0;
+ while ((input[i] != ' ') && (input[i] != 0)) {
+ j = input[i] - 0x30;
+ if (j >= 0xA) {
+ j -= 0x07;
+ }
+ reg = (reg * 0x10) + j;
+ i++;
+ }
+
+ while ((input[i] != ' ') && (input[i] != 0))
+ i++;
+
+ if (input[i] != 0)
+ i++;
+ else
+ what = UNKNOWN;
+
+ /* Get the value to write */
+ j = 0;
+ while ((input[i] != ' ') && (input[i] != 0)) {
+ j = input[i] - 0x30;
+ if (j >= 0xA) {
+ j -= 0x07;
+ }
+ value = (value * 0x10) + j;
+ i++;
+ }
+
+ switch (what) {
+ case 1:
+ printf ("Writing EEPROM register %02x with %04x\n",
+ reg, value);
+ write_eeprom_reg (value, reg);
+ break;
+ case 2:
+ printf ("Writing MAC register bank %i,
+ reg %02x with %04x\n", reg >> 4, reg & 0xE, value);
+ SMC_SELECT_BANK (reg >> 4);
+ SMC_outw (value, reg & 0xE);
+ break;
+ default:
+ printf ("Wrong\n");
+ break;
+ }
+ break;
+ case ('D'):
+ dump_eeprom ();
+ break;
+ case ('M'):
+ dump_reg ();
+ break;
+ case ('C'):
+ copy_from_eeprom ();
+ break;
+ case ('P'):
+ print_macaddr ();
+ break;
+ default:
+ break;
+ }
+
+ }
+
+ return (0);
+}
+
+void copy_from_eeprom (void)
+{
+ int i;
+
+ SMC_SELECT_BANK (1);
+ SMC_outw ((SMC_inw (CTL_REG) & !CTL_EEPROM_SELECT) | CTL_RELOAD,
+ CTL_REG);
+ i = 100;
+ while ((SMC_inw (CTL_REG) & CTL_RELOAD) && --i)
+ udelay (100);
+ if (i == 0) {
+ printf ("Timeout Refreshing EEPROM registers\n");
+ } else {
+ printf ("EEPROM contents copied to MAC\n");
+ }
+
+}
+
+void print_macaddr (void)
+{
+ int i, j, k, mac[6];
+
+ printf ("Current MAC Address in SMSC91111 ");
+ SMC_SELECT_BANK (1);
+ for (i = 0; i < 5; i++) {
+ printf ("%02x:", SMC_inb (ADDR0_REG + i));
+ }
+
+ printf ("%02x\n", SMC_inb (ADDR0_REG + 5));
+
+ i = 0;
+ for (j = 0x20; j < 0x23; j++) {
+ k = read_eeprom_reg (j);
+ mac[i] = k & 0xFF;
+ i++;
+ mac[i] = k >> 8;
+ i++;
+ }
+
+ printf ("Current MAC Address in EEPROM ");
+ for (i = 0; i < 5; i++)
+ printf ("%02x:", mac[i]);
+ printf ("%02x\n", mac[5]);
+
+}
+void dump_eeprom (void)
+{
+ int j, k;
+
+ printf ("IOS2-0 ");
+ for (j = 0; j < 8; j++) {
+ printf ("%03x ", j);
+ }
+ printf ("\n");
+
+ for (k = 0; k < 4; k++) {
+ if (k == 0)
+ printf ("CONFIG ");
+ if (k == 1)
+ printf ("BASE ");
+ if ((k == 2) || (k == 3))
+ printf (" ");
+ for (j = 0; j < 0x20; j += 4) {
+ printf ("%02x:%04x ", j + k, read_eeprom_reg (j + k));
+ }
+ printf ("\n");
+ }
+
+ for (j = 0x20; j < 0x40; j++) {
+ if ((j & 0x07) == 0)
+ printf ("\n");
+ printf ("%02x:%04x ", j, read_eeprom_reg (j));
+ }
+ printf ("\n");
+
+}
+
+int read_eeprom_reg (int reg)
+{
+ int timeout;
+
+ SMC_SELECT_BANK (2);
+ SMC_outw (reg, PTR_REG);
+
+ SMC_SELECT_BANK (1);
+ SMC_outw (SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD,
+ CTL_REG);
+ timeout = 100;
+ while ((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout)
+ udelay (100);
+ if (timeout == 0) {
+ printf ("Timeout Reading EEPROM register %02x\n", reg);
+ return 0;
+ }
+
+ return SMC_inw (GP_REG);
+
+}
+
+int write_eeprom_reg (int value, int reg)
+{
+ int timeout;
+
+ SMC_SELECT_BANK (2);
+ SMC_outw (reg, PTR_REG);
+
+ SMC_SELECT_BANK (1);
+ SMC_outw (value, GP_REG);
+ SMC_outw (SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG);
+ timeout = 100;
+ while ((SMC_inw (CTL_REG) & CTL_STORE) && --timeout)
+ udelay (100);
+ if (timeout == 0) {
+ printf ("Timeout Writing EEPROM register %02x\n", reg);
+ return 0;
+ }
+
+ return 1;
+
+}
+
+void dump_reg (void)
+{
+ int i, j;
+
+ printf (" ");
+ for (j = 0; j < 4; j++) {
+ printf ("Bank%i ", j);
+ }
+ printf ("\n");
+ for (i = 0; i < 0xF; i += 2) {
+ printf ("%02x ", i);
+ for (j = 0; j < 4; j++) {
+ SMC_SELECT_BANK (j);
+ printf ("%04x ", SMC_inw (i));
+ }
+ printf ("\n");
+ }
+}
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 1369748..0b0ffd4 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -35,7 +35,11 @@
* High Level Configuration Options
* (easy to change)
*/
+#if 1
#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
+#else
+#define CONFIG_ARM946ES 1 /* This is an arm946es CPU core */
+#endif
#define CONFIG_INTEGRATOR 1 /* in an Integrator board */
#define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */
@@ -51,7 +55,7 @@
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
@@ -69,31 +73,39 @@
#define CONFIG_PL011_CLOCK 14745600
#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 38400
+#define CONFIG_BAUDRATE 38400
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0 0x16000000
#define CFG_SERIAL1 0x17000000
-#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+/*
+#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_PCI)
+*/
+#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | \
+ CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV \
+ )
+
+/* #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#if 0
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0"
#define CONFIG_BOOTCOMMAND "bootp ; bootm"
+#endif
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0x7fc0 /* default load address */
@@ -112,23 +124,24 @@
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CFG_FLASH_BASE 0x24000000
-#define PHYS_FLASH_1 (CFG_FLASH_BASE)
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-#define CFG_ENV_IS_NOWHERE
+#define CFG_FLASH_BASE 0x24000000
+#define CFG_MAX_FLASH_SECT 64
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
-/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
-#define CFG_MAX_FLASH_SECT 128
-#define CFG_ENV_SIZE 32768
-#endif /* __CONFIG_H */
+#define CFG_MONITOR_BASE 0x24F40000
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_ADDR 0x24F00000
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256KB */
+#define CFG_ENV_SIZE 8192 /* 8KB */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 8516054..47f78fa 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -40,17 +40,17 @@
/* Clock config to target*/
#define PRCM_CONFIG_II 1
-//#define PRCM_CONFIG_III 1
+/*#define PRCM_CONFIG_III 1 */
/* Memory configuration on board */
-//#define CONFIG_OPTIMIZE_DDR 1
+/*#define CONFIG_OPTIMIZE_DDR 1 */
#include <asm/arch/omap2420.h> /* get chip and board defs */
/* On H4, NOR and NAND flash are mutual exclusive.
Define this if you want to use NAND
*/
-//#define CFG_NAND_BOOT
+/*#define CFG_NAND_BOOT */
#ifdef CONFIG_APTIX
#define V_SCLK 1500000