summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/amcc/katmai/katmai.c14
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c96
-rw-r--r--include/configs/katmai.h1
-rw-r--r--include/ppc440.h12
4 files changed, 61 insertions, 62 deletions
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 25c9a22..e41caaf 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -246,6 +246,18 @@ int checkboard (void)
return 0;
}
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_wrdtr(u32 default_val) {
+ return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
+}
+
+u32 ddr_clktr(u32 default_val) {
+ return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
+}
+
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index e199294..3ac2cdc 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -3,7 +3,7 @@
* This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
* DDR2 controller (non Denali Core). Those are 440SP/SPe.
*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* COPYRIGHT AMCC CORPORATION 2004
@@ -111,8 +111,6 @@
#define NUMMEMWORDS 8
#define NUMLOOPS 64 /* memory test loops */
-#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
-
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
* region. Right now the cache should still be disabled in U-Boot because of the
@@ -2268,39 +2266,6 @@ static void program_ecc(unsigned long *dimm_populated,
return;
}
-#ifdef CONFIG_ECC_ERROR_RESET
-/*
- * Check for ECC errors and reset board upon any error here
- *
- * On the Katmai 440SPe eval board, from time to time, the first
- * lword write access after DDR2 initializazion with ECC checking
- * enabled, leads to an ECC error. I couldn't find a configuration
- * without this happening. On my board with the current setup it
- * happens about 1 from 10 times.
- *
- * The ECC modules used for testing are:
- * - Kingston ValueRAM KVR667D2E5/512 (tested with 1 and 2 DIMM's)
- *
- * This has to get fixed for the Katmai and tested for the other
- * board (440SP/440SPe) that will eventually use this code in the
- * future.
- *
- * 2007-03-01, sr
- */
-static void check_ecc(void)
-{
- u32 val;
-
- mfsdram(SDRAM_ECCCR, val);
- if (val != 0) {
- printf("\nECC error: MCIF0_ECCES=%08lx MQ0_ESL=%08lx address=%08lx\n",
- val, mfdcr(0x4c), mfdcr(0x4e));
- printf("ECC error occured, resetting board...\n");
- do_reset(NULL, 0, 0, NULL);
- }
-}
-#endif
-
static void wait_ddr_idle(void)
{
u32 val;
@@ -2375,15 +2340,6 @@ static void program_ecc_addr(unsigned long start_address,
sync();
eieio();
wait_ddr_idle();
-
-#ifdef CONFIG_ECC_ERROR_RESET
- /*
- * One write to 0 is enough to trigger this ECC error
- * (see description above)
- */
- out_be32(0, 0x12345678);
- check_ecc();
-#endif
}
}
#endif
@@ -2409,17 +2365,10 @@ static void program_DQS_calibration(unsigned long *dimm_populated,
* Read sample cycle auto-update enable
*-----------------------------------------------------------------*/
- /*
- * Modified for the Katmai platform: with some DIMMs, the DDR2
- * controller automatically selects the T2 read cycle, but this
- * proves unreliable. Go ahead and force the DDR2 controller
- * to use the T4 sample and disable the automatic update of the
- * RDSS field.
- */
mfsdram(SDRAM_RDCC, val);
mtsdram(SDRAM_RDCC,
(val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
- | (SDRAM_RDCC_RDSS_T4 | SDRAM_RDCC_RSAE_DISABLE));
+ | SDRAM_RDCC_RSAE_ENABLE);
/*------------------------------------------------------------------
* Program RQDC register
@@ -2512,10 +2461,7 @@ static void DQS_calibration_process(void)
{
unsigned long rfdc_reg;
unsigned long rffd;
- unsigned long rqdc_reg;
- unsigned long rqfd;
unsigned long val;
- long rqfd_average;
long rffd_average;
long max_start;
long min_end;
@@ -2533,10 +2479,14 @@ static void DQS_calibration_process(void)
long max_end;
unsigned char fail_found;
unsigned char pass_found;
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ u32 rqdc_reg;
+ u32 rqfd;
u32 rqfd_start;
+ u32 rqfd_average;
+ int loopi = 0;
char str[] = "Auto calibration -";
char slash[] = "\\|/-\\|/-";
- int loopi = 0;
/*------------------------------------------------------------------
* Test to determine the best read clock delay tuning bits.
@@ -2571,6 +2521,16 @@ calibration_loop:
mfsdram(SDRAM_RQDC, rqdc_reg);
mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
+#else /* CONFIG_DDR_RQDC_FIXED */
+ /*
+ * On Katmai the complete auto-calibration somehow doesn't seem to
+ * produce the best results, meaning optimal values for RQFD/RFFD.
+ * This was discovered by GDA using a high bandwidth scope,
+ * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ * so now on Katmai "only" RFFD is auto-calibrated.
+ */
+ mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
+#endif /* CONFIG_DDR_RQDC_FIXED */
max_start = 0;
min_end = 0;
@@ -2655,6 +2615,7 @@ calibration_loop:
/* now fix RFDC[RFFD] found and find RQDC[RQFD] */
mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+#if !defined(CONFIG_DDR_RQDC_FIXED)
max_pass_length = 0;
max_start = 0;
max_end = 0;
@@ -2727,8 +2688,6 @@ calibration_loop:
spd_ddr_init_hang ();
}
- blank_string(strlen(str));
-
if (rqfd_average < 0)
rqfd_average = 0;
@@ -2739,12 +2698,31 @@ calibration_loop:
(rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+ blank_string(strlen(str));
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ /*
+ * Now complete RDSS configuration as mentioned on page 7 of the AMCC
+ * PowerPC440SP/SPe DDR2 application note:
+ * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
+ */
+ mfsdram(SDRAM_RTSR, val);
+ if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
+ mfsdram(SDRAM_RDCC, val);
+ if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
+ val += 0x40000000;
+ mtsdram(SDRAM_RDCC, val);
+ }
+ }
+
mfsdram(SDRAM_DLCR, val);
debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RQDC, val);
debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RFDC, val);
debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RDCC, val);
+ debug("%s[%d] RDCC: 0x%08X\n", __FUNCTION__, __LINE__, val);
}
#else /* calibration test with hardvalues */
/*-----------------------------------------------------------------------------+
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 0aa4f2d..78c794a 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -111,6 +111,7 @@
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/
#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* optimal value found by GDA*/
#undef CONFIG_STRESS
/*-----------------------------------------------------------------------
diff --git a/include/ppc440.h b/include/ppc440.h
index 90e56b0..bfd1e10 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -492,6 +492,7 @@
#define SDRAM_ECCCR 0x98 /* ECC error status */
#define SDRAM_CID 0xA4 /* core ID */
#define SDRAM_RID 0xA8 /* revision ID */
+#define SDRAM_RTSR 0xB1 /* run time status tracking */
/*-----------------------------------------------------------------------------+
| Memory Controller Status
@@ -605,8 +606,8 @@
#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
#define SDRAM_RFDC_RFOS_MASK 0x007F0000
#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK 0x000003FF
-#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define SDRAM_RFDC_RFFD_MASK 0x000007FF
+#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x7FF)<<0)
#define SDRAM_RFDC_RFFD_MAX 0x7FF
@@ -690,6 +691,7 @@
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
+#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
@@ -790,6 +792,12 @@
#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
+#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/
+#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */
+#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */
+#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
+#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
+
#define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */
#endif /* CONFIG_440SPE */