summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/pxa/Makefile1
-rw-r--r--drivers/i2c/Makefile1
-rw-r--r--drivers/i2c/mv_i2c.c (renamed from arch/arm/cpu/pxa/i2c.c)127
-rw-r--r--include/configs/innokom.h1
-rw-r--r--include/configs/xm250.h1
5 files changed, 58 insertions, 73 deletions
diff --git a/arch/arm/cpu/pxa/Makefile b/arch/arm/cpu/pxa/Makefile
index 49a6ed3..e8b59a3 100644
--- a/arch/arm/cpu/pxa/Makefile
+++ b/arch/arm/cpu/pxa/Makefile
@@ -28,7 +28,6 @@ LIB = $(obj)lib$(CPU).o
START = start.o
COBJS += cpu.o
-COBJS += i2c.o
COBJS += pxafb.o
COBJS += timer.o
COBJS += usb.o
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 052fe36..00a12cc 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
+COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
diff --git a/arch/arm/cpu/pxa/i2c.c b/drivers/i2c/mv_i2c.c
index 7aa49ae..09756a4 100644
--- a/arch/arm/cpu/pxa/i2c.c
+++ b/drivers/i2c/mv_i2c.c
@@ -30,8 +30,6 @@
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
*/
-/* FIXME: this file is PXA255 specific! What about other XScales? */
-
#include <common.h>
#include <asm/io.h>
@@ -46,11 +44,9 @@
#include <asm/arch/pxa-regs.h>
#include <i2c.h>
-/*#define DEBUG_I2C 1 /###* activate local debugging output */
-#define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */
-
#if (CONFIG_SYS_I2C_SPEED == 400000)
-#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD \
+ | ICR_SCLE)
#else
#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
#endif
@@ -63,7 +59,6 @@
#define PRINTD(x)
#endif
-
/* Shall the current transfer have a start/stop condition? */
#define I2C_COND_NORMAL 0
#define I2C_COND_START 1
@@ -86,13 +81,11 @@ struct i2c_msg {
u8 data;
};
-
-/**
+/*
* i2c_pxa_reset: - reset the host controller
*
*/
-
-static void i2c_reset( void )
+static void i2c_reset(void)
{
writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */
writel(readl(ICR) | ICR_UR, ICR); /* reset the unit */
@@ -112,27 +105,27 @@ static void i2c_reset( void )
udelay(100);
}
-
-/**
+/*
* i2c_isr_set_cleared: - wait until certain bits of the I2C status register
* are set and cleared
*
* @return: 1 in case of success, 0 means timeout (no match within 10 ms).
*/
-static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask )
+static int i2c_isr_set_cleared(unsigned long set_mask,
+ unsigned long cleared_mask)
{
int timeout = 10000;
- while( ((ISR & set_mask)!=set_mask) || ((ISR & cleared_mask)!=0) ){
- udelay( 10 );
- if( timeout-- < 0 ) return 0;
+ while (((ISR & set_mask) != set_mask) || ((ISR & cleared_mask) != 0)) {
+ udelay(10);
+ if (timeout-- < 0)
+ return 0;
}
return 1;
}
-
-/**
+/*
* i2c_transfer: - Transfer one byte over the i2c bus
*
* This function can tranfer a byte over the i2c bus in both directions.
@@ -153,12 +146,10 @@ int i2c_transfer(struct i2c_msg *msg)
if (!msg)
goto transfer_error_msg_empty;
- switch(msg->direction) {
-
+ switch (msg->direction) {
case I2C_WRITE:
-
/* check if bus is not busy */
- if (!i2c_isr_set_cleared(0,ISR_IBB))
+ if (!i2c_isr_set_cleared(0, ISR_IBB))
goto transfer_error_bus_busy;
/* start transmission */
@@ -177,7 +168,7 @@ int i2c_transfer(struct i2c_msg *msg)
writel(readl(ICR) | ICR_TB, ICR);
/* transmit register empty? */
- if (!i2c_isr_set_cleared(ISR_ITE,0))
+ if (!i2c_isr_set_cleared(ISR_ITE, 0))
goto transfer_error_transmit_timeout;
/* clear 'transmit empty' state */
@@ -185,14 +176,14 @@ int i2c_transfer(struct i2c_msg *msg)
/* wait for ACK from slave */
if (msg->acknack == I2C_ACKNAK_WAITACK)
- if (!i2c_isr_set_cleared(0,ISR_ACKNAK))
+ if (!i2c_isr_set_cleared(0, ISR_ACKNAK))
goto transfer_error_ack_missing;
break;
case I2C_READ:
/* check if bus is not busy */
- if (!i2c_isr_set_cleared(0,ISR_IBB))
+ if (!i2c_isr_set_cleared(0, ISR_IBB))
goto transfer_error_bus_busy;
/* start receive */
@@ -210,7 +201,7 @@ int i2c_transfer(struct i2c_msg *msg)
writel(readl(ICR) | ICR_TB, ICR);
/* receive register full? */
- if (!i2c_isr_set_cleared(ISR_IRF,0))
+ if (!i2c_isr_set_cleared(ISR_IRF, 0))
goto transfer_error_receive_timeout;
msg->data = readl(IDBR);
@@ -219,11 +210,8 @@ int i2c_transfer(struct i2c_msg *msg)
writel(readl(ISR) | ISR_IRF, ISR);
break;
-
default:
-
goto transfer_error_illegal_param;
-
}
return 0;
@@ -253,16 +241,14 @@ transfer_error_bus_busy:
ret = -6; goto i2c_transfer_finish;
i2c_transfer_finish:
- PRINTD(("i2c_transfer: ISR: 0x%04x\n",ISR));
+ PRINTD(("i2c_transfer: ISR: 0x%04x\n", ISR));
i2c_reset();
return ret;
-
}
/* ------------------------------------------------------------------------ */
/* API Functions */
/* ------------------------------------------------------------------------ */
-
void i2c_init(int speed, int slaveaddr)
{
#ifdef CONFIG_SYS_I2C_INIT_BOARD
@@ -273,14 +259,12 @@ void i2c_init(int speed, int slaveaddr)
#endif
}
-
-/**
+/*
* i2c_probe: - Test if a chip answers for a given i2c address
*
* @chip: address of the chip which is searched for
* @return: 0 if a chip was found, -1 otherwhise
*/
-
int i2c_probe(uchar chip)
{
struct i2c_msg msg;
@@ -291,19 +275,20 @@ int i2c_probe(uchar chip)
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
msg.data = (chip << 1) + 1;
- if (i2c_transfer(&msg)) return -1;
+ if (i2c_transfer(&msg))
+ return -1;
msg.condition = I2C_COND_STOP;
msg.acknack = I2C_ACKNAK_SENDNAK;
msg.direction = I2C_READ;
msg.data = 0x00;
- if (i2c_transfer(&msg)) return -1;
+ if (i2c_transfer(&msg))
+ return -1;
return 0;
}
-
-/**
+/*
* i2c_read: - Read multiple bytes from an i2c device
*
* The higher level routines take into account that this function is only
@@ -316,14 +301,13 @@ int i2c_probe(uchar chip)
* @len: how much byte do we want to read
* @return: 0 in case of success
*/
-
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
struct i2c_msg msg;
u8 addr_bytes[3]; /* lowest...highest byte of data address */
- int ret;
- PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
+ PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
+ "len=0x%02x)\n", chip, addr, alen, len));
i2c_reset();
@@ -332,9 +316,10 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
msg.condition = I2C_COND_START;
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
- msg.data = (chip << 1);
- msg.data &= 0xFE;
- if ((ret=i2c_transfer(&msg))) return -1;
+ msg.data = (chip << 1);
+ msg.data &= 0xFE;
+ if (i2c_transfer(&msg))
+ return -1;
/*
* send memory address bytes;
@@ -346,16 +331,15 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
while (--alen >= 0) {
-
- PRINTD(("i2c_read: send memory word address byte %1d\n",alen));
+ PRINTD(("i2c_read: send memory word address byte %1d\n", alen));
msg.condition = I2C_COND_NORMAL;
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
msg.data = addr_bytes[alen];
- if ((ret=i2c_transfer(&msg))) return -1;
+ if (i2c_transfer(&msg))
+ return -1;
}
-
/* start read sequence */
PRINTD(("i2c_read: start read sequence\n"));
msg.condition = I2C_COND_START;
@@ -363,12 +347,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
msg.direction = I2C_WRITE;
msg.data = (chip << 1);
msg.data |= 0x01;
- if ((ret=i2c_transfer(&msg))) return -1;
+ if (i2c_transfer(&msg))
+ return -1;
/* read bytes; send NACK at last byte */
while (len--) {
-
- if (len==0) {
+ if (len == 0) {
msg.condition = I2C_COND_STOP;
msg.acknack = I2C_ACKNAK_SENDNAK;
} else {
@@ -378,12 +362,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
msg.direction = I2C_READ;
msg.data = 0x00;
- if ((ret=i2c_transfer(&msg))) return -1;
+ if (i2c_transfer(&msg))
+ return -1;
*buffer = msg.data;
- PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
+ PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",
+ (unsigned int)buffer, *buffer));
buffer++;
-
}
i2c_reset();
@@ -391,8 +376,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
return 0;
}
-
-/**
+/*
* i2c_write: - Write multiple bytes to an i2c device
*
* The higher level routines take into account that this function is only
@@ -405,13 +389,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
* @len: how much byte do we want to read
* @return: 0 in case of success
*/
-
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
struct i2c_msg msg;
u8 addr_bytes[3]; /* lowest...highest byte of data address */
- PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
+ PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
+ "len=0x%02x)\n", chip, addr, alen, len));
i2c_reset();
@@ -420,9 +404,10 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
msg.condition = I2C_COND_START;
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
- msg.data = (chip << 1);
- msg.data &= 0xFE;
- if (i2c_transfer(&msg)) return -1;
+ msg.data = (chip << 1);
+ msg.data &= 0xFE;
+ if (i2c_transfer(&msg))
+ return -1;
/*
* send memory address bytes;
@@ -433,21 +418,21 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
while (--alen >= 0) {
-
PRINTD(("i2c_write: send memory word address\n"));
msg.condition = I2C_COND_NORMAL;
msg.acknack = I2C_ACKNAK_WAITACK;
msg.direction = I2C_WRITE;
msg.data = addr_bytes[alen];
- if (i2c_transfer(&msg)) return -1;
+ if (i2c_transfer(&msg))
+ return -1;
}
/* write bytes; send NACK at last byte */
while (len--) {
+ PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",
+ (unsigned int)buffer, *buffer));
- PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
-
- if (len==0)
+ if (len == 0)
msg.condition = I2C_COND_STOP;
else
msg.condition = I2C_COND_NORMAL;
@@ -456,14 +441,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
msg.direction = I2C_WRITE;
msg.data = *(buffer++);
- if (i2c_transfer(&msg)) return -1;
-
+ if (i2c_transfer(&msg))
+ return -1;
}
i2c_reset();
return 0;
-
}
-
#endif /* CONFIG_HARD_I2C */
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index d8fcbdb..0ea73c9 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -140,6 +140,7 @@
/*
* I2C bus
*/
+#define CONFIG_I2C_MV 1
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0xfe
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 497cb91..b4b940a 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -61,6 +61,7 @@
/*
* I2C bus
*/
+#define CONFIG_I2C_MV 1
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0xfe