diff options
| -rw-r--r-- | arch/arm/dts/exynos4412-odroid.dts | 11 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/ehci.h | 13 | ||||
| -rw-r--r-- | board/samsung/odroid/odroid.c | 32 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-exynos.c | 55 | ||||
| -rw-r--r-- | include/configs/odroid.h | 13 |
5 files changed, 116 insertions, 8 deletions
diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 2a1f1dd..c78efec 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -67,4 +67,15 @@ div = <0x3>; index = <4>; }; + + ehci@12580000 { + compatible = "samsung,exynos-ehci"; + reg = <0x12580000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + phy { + compatible = "samsung,exynos-usb-phy"; + reg = <0x125B0000 0x100>; + }; + }; }; diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h index d2d70bd..3800fa9 100644 --- a/arch/arm/include/asm/arch-exynos/ehci.h +++ b/arch/arm/include/asm/arch-exynos/ehci.h @@ -12,6 +12,13 @@ #define CLK_24MHZ 5 +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) +#define RSTCON_HOSTPHY_SWRST (0xf << 3) +#define RSTCON_SWRST (0x1 << 0) + #define HOST_CTRL0_PHYSWRSTALL (1 << 31) #define HOST_CTRL0_COMMONON_N (1 << 9) #define HOST_CTRL0_SIDDQ (1 << 6) @@ -61,6 +68,12 @@ struct exynos_usb_phy { unsigned int usbotgtune; }; +struct exynos4412_usb_phy { + unsigned int usbphyctrl; + unsigned int usbphyclk; + unsigned int usbphyrstcon; +}; + /* Switch on the VBUS power. */ int board_usb_vbus_init(void); diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 33003ee..f7396ab 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -462,9 +462,41 @@ struct s3c_plat_otg_data s5pc210_otg_data = { .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, .usb_flags = PHY0_SLEEP, }; +#endif + +#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB) int board_usb_init(int index, enum usb_init_type init) { +#ifdef CONFIG_CMD_USB + struct pmic *p_pmic; + + /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/ + /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */ + if (gd->board_type == ODROID_TYPE_U3) + gpio_direction_output(EXYNOS4X12_GPIO_X30, 0); + else + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1); + + /* Disconnect, Reset, Connect */ + gpio_direction_output(EXYNOS4X12_GPIO_X34, 0); + gpio_direction_output(EXYNOS4X12_GPIO_X35, 0); + gpio_direction_output(EXYNOS4X12_GPIO_X35, 1); + gpio_direction_output(EXYNOS4X12_GPIO_X34, 1); + + /* Power off and on BUCK8 for LAN9730 */ + debug("LAN9730 - Turning power buck 8 OFF and ON.\n"); + + p_pmic = pmic_get("MAX77686_PMIC"); + if (p_pmic && !pmic_probe(p_pmic)) { + max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF); + max77686_set_buck_voltage(p_pmic, 8, 750000); + max77686_set_buck_voltage(p_pmic, 8, 3300000); + max77686_set_buck_mode(p_pmic, 8, OPMODE_ON); + } + +#endif + debug("USB_udc_probe\n"); return s3c_udc_probe(&s5pc210_otg_data); } diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index edd91a8..6fdbf57 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -85,15 +85,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) } #endif -/* Setup the EHCI host controller. */ -static void setup_usb_phy(struct exynos_usb_phy *usb) +static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb) { u32 hsic_ctrl; - set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); - - set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); - clrbits_le32(&usb->usbphyctrl0, HOST_CTRL0_FSEL_MASK | HOST_CTRL0_COMMONON_N | @@ -150,8 +145,34 @@ static void setup_usb_phy(struct exynos_usb_phy *usb) EHCICTRL_ENAINCR16); } -/* Reset the EHCI host controller. */ -static void reset_usb_phy(struct exynos_usb_phy *usb) +static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb) +{ + writel(CLK_24MHZ, &usb->usbphyclk); + + clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | + PHYPWR_NORMAL_MASK_PHY0)); + + setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); + udelay(10); + clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); +} + +static void setup_usb_phy(struct exynos_usb_phy *usb) +{ + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); + + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); + + if (cpu_is_exynos5()) + exynos5_setup_usb_phy(usb); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_setup_usb_phy((struct exynos4412_usb_phy *) + usb); +} + +static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb) { u32 hsic_ctrl; @@ -171,6 +192,24 @@ static void reset_usb_phy(struct exynos_usb_phy *usb) setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); +} + +static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb) +{ + setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | + PHYPWR_NORMAL_MASK_PHY0)); +} + +/* Reset the EHCI host controller. */ +static void reset_usb_phy(struct exynos_usb_phy *usb) +{ + if (cpu_is_exynos5()) + exynos5_reset_usb_phy(usb); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_reset_usb_phy((struct exynos4412_usb_phy *) + usb); set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE); } diff --git a/include/configs/odroid.h b/include/configs/odroid.h index b928af8..807e96b 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -198,6 +198,19 @@ #define CONFIG_CMD_GPIO +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX + /* * Supported Odroid boards: X3, U3 * TODO: Add Odroid X support |