summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/esd/cpci750/64360.h53
-rw-r--r--board/esd/cpci750/Makefile44
-rw-r--r--board/esd/cpci750/config.mk28
-rw-r--r--board/esd/cpci750/cpci750.c885
-rw-r--r--board/esd/cpci750/eth.h43
-rw-r--r--board/esd/cpci750/i2c.c487
-rw-r--r--board/esd/cpci750/i2c.h32
-rw-r--r--board/esd/cpci750/ide.c72
-rw-r--r--board/esd/cpci750/local.h83
-rw-r--r--board/esd/cpci750/misc.S245
-rw-r--r--board/esd/cpci750/mpsc.c1018
-rw-r--r--board/esd/cpci750/mpsc.h156
-rw-r--r--board/esd/cpci750/mv_eth.c3182
-rw-r--r--board/esd/cpci750/mv_eth.h844
-rw-r--r--board/esd/cpci750/mv_regs.h1124
-rw-r--r--board/esd/cpci750/pci.c961
-rw-r--r--board/esd/cpci750/sdram_init.c1439
-rw-r--r--board/esd/cpci750/serial.c110
-rw-r--r--board/esd/cpci750/serial.h89
-rw-r--r--board/esd/cpci750/strataflash.c763
-rw-r--r--board/esd/cpci750/u-boot.lds135
21 files changed, 11793 insertions, 0 deletions
diff --git a/board/esd/cpci750/64360.h b/board/esd/cpci750/64360.h
new file mode 100644
index 0000000..262abf3
--- /dev/null
+++ b/board/esd/cpci750/64360.h
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ * for cpci750 Reinhard Arlt
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * main board support/init for the cpci750.
+ */
+
+#ifndef __64360_H__
+#define __64360_H__
+
+/* CPU Configuration bits */
+#define CPU_CONF_ADDR_MISS_EN (1 << 8)
+#define CPU_CONF_SINGLE_CPU (1 << 11)
+#define CPU_CONF_ENDIANESS (1 << 12)
+#define CPU_CONF_PIPELINE (1 << 13)
+#define CPU_CONF_STOP_RETRY (1 << 17)
+#define CPU_CONF_MULTI_DECODE (1 << 18)
+#define CPU_CONF_DP_VALID (1 << 19)
+#define CPU_CONF_PERR_PROP (1 << 22)
+#define CPU_CONF_AACK_DELAY_2 (1 << 25)
+#define CPU_CONF_AP_VALID (1 << 26)
+#define CPU_CONF_REMAP_WR_DIS (1 << 27)
+
+/* CPU Master Control bits */
+#define CPU_MAST_CTL_ARB_EN (1 << 8)
+#define CPU_MAST_CTL_MASK_BR_1 (1 << 9)
+#define CPU_MAST_CTL_M_WR_TRIG (1 << 10)
+#define CPU_MAST_CTL_M_RD_TRIG (1 << 11)
+#define CPU_MAST_CTL_CLEAN_BLK (1 << 12)
+#define CPU_MAST_CTL_FLUSH_BLK (1 << 13)
+
+#endif /* __64360_H__ */
diff --git a/board/esd/cpci750/Makefile b/board/esd/cpci750/Makefile
new file mode 100644
index 0000000..0486729
--- /dev/null
+++ b/board/esd/cpci750/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+SOBJS = misc.o
+
+OBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \
+ mv_eth.o mpsc.o i2c.o \
+ sdram_init.o strataflash.o ide.o
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/esd/cpci750/config.mk b/board/esd/cpci750/config.mk
new file mode 100644
index 0000000..7795dfa
--- /dev/null
+++ b/board/esd/cpci750/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2004
+# Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# cpci750 board
+#
+
+TEXT_BASE = 0xfff00000
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
new file mode 100644
index 0000000..56c12d7
--- /dev/null
+++ b/board/esd/cpci750/cpci750.c
@@ -0,0 +1,885 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the DB64360 eval board based by Ingo.Assmus@keymile.com
+ * modifications for the cpci750 by reinhard.arlt@esd-electronics.com
+ */
+
+/*
+ * cpci750.c - main board support/init for the esd cpci750.
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../../Marvell/include/memory.h"
+#include "../../Marvell/include/pci.h"
+#include "../../Marvell/include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "i2c.h"
+#include "64360.h"
+#include "mv_regs.h"
+
+#undef DEBUG
+/*#define DEBUG */
+
+#ifdef CONFIG_PCI
+#define MAP_PCI
+#endif /* of CONFIG_PCI */
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+
+/* ------------------------------------------------------------------------- */
+
+/* this is the current GT register space location */
+/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+
+/* Unfortunately, we cant change it while we are in flash, so we initialize it
+ * to the "final" value. This means that any debug_led calls before
+ * board_early_init_f wont work right (like in cpu_init_f).
+ * See also my_remap_gt_regs below. (NTL)
+ */
+
+void board_prebootm_init (void);
+unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+int display_mem_map (void);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * This is a version of the GT register space remapping function that
+ * doesn't touch globals (meaning, it's ok to run from flash.)
+ *
+ * Unfortunately, this has the side effect that a writable
+ * INTERNAL_REG_BASE_ADDR is impossible. Oh well.
+ */
+
+void my_remap_gt_regs (u32 cur_loc, u32 new_loc)
+{
+ u32 temp;
+
+ /* check and see if it's already moved */
+
+/* original ppcboot 1.1.6 source
+
+ temp = in_le32((u32 *)(new_loc + INTERNAL_SPACE_DECODE));
+ if ((temp & 0xffff) == new_loc >> 20)
+ return;
+
+ temp = (in_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE)) &
+ 0xffff0000) | (new_loc >> 20);
+
+ out_le32((u32 *)(cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+ while (GTREGREAD(INTERNAL_SPACE_DECODE) != temp);
+original ppcboot 1.1.6 source end */
+
+ temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+ if ((temp & 0xffff) == new_loc >> 16)
+ return;
+
+ temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+ 0xffff0000) | (new_loc >> 16);
+
+ out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+ while (GTREGREAD (INTERNAL_SPACE_DECODE) != temp);
+}
+
+#ifdef CONFIG_PCI
+
+static void gt_pci_config (void)
+{
+ unsigned int stat;
+ unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
+
+ /* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
+ * config registers by writing ones to the bus and device.
+ * We then update the Virtual register with the correct value for the bus and device.
+ */
+ if ((GTREGREAD (PCI_0_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
+ GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+
+ GT_REG_READ (PCI_0_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+ GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
+ GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
+ (stat & 0xffff0000) | CFG_PCI_IDSEL);
+
+ }
+ if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
+ GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+ GT_REG_READ (PCI_1_CONFIG_DATA_VIRTUAL_REG, &stat);
+
+ GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
+ GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
+ (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ }
+
+ /* Enable master */
+ PCI_MASTER_ENABLE (0, SELF);
+ PCI_MASTER_ENABLE (1, SELF);
+
+ /* Enable PCI0/1 Mem0 and IO 0 disable all others */
+ GT_REG_READ (BASE_ADDR_ENABLE, &stat);
+ stat |= (1 << 11) | (1 << 12) | (1 << 13) | (1 << 16) | (1 << 17) | (1
+ <<
+ 18);
+ stat &= ~((1 << 9) | (1 << 10) | (1 << 14) | (1 << 15));
+ GT_REG_WRITE (BASE_ADDR_ENABLE, stat);
+
+ /* ronen- add write to pci remap registers for 64460.
+ in 64360 when writing to pci base go and overide remap automaticaly,
+ in 64460 it doesn't */
+ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
+ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
+ GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+
+ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+
+ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
+ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
+ GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+
+ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+
+ /* PCI interface settings */
+ /* Timeout set to retry forever */
+ GT_REG_WRITE (PCI_0TIMEOUT_RETRY, 0x0);
+ GT_REG_WRITE (PCI_1TIMEOUT_RETRY, 0x0);
+
+ /* ronen - enable only CS0 and Internal reg!! */
+ GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+ GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+
+/*ronen update the pci internal registers base address.*/
+#ifdef MAP_PCI
+ for (stat = 0; stat <= PCI_HOST1; stat++)
+ pciWriteConfigReg (stat,
+ PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
+ SELF, CFG_GT_REGS);
+#endif
+
+}
+#endif
+
+/* Setup CPU interface paramaters */
+static void gt_cpu_config (void)
+{
+ cpu_t cpu = get_cpu_type ();
+ ulong tmp;
+
+ /* cpu configuration register */
+ tmp = GTREGREAD (CPU_CONFIGURATION);
+
+ /* set the SINGLE_CPU bit see MV64360 P.399 */
+#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
+ tmp |= CPU_CONF_SINGLE_CPU;
+#endif
+
+ tmp &= ~CPU_CONF_AACK_DELAY_2;
+
+ tmp |= CPU_CONF_DP_VALID;
+ tmp |= CPU_CONF_AP_VALID;
+
+ tmp |= CPU_CONF_PIPELINE;
+
+ GT_REG_WRITE (CPU_CONFIGURATION, tmp); /* Marvell (VXWorks) writes 0x20220FF */
+
+ /* CPU master control register */
+ tmp = GTREGREAD (CPU_MASTER_CONTROL);
+
+ tmp |= CPU_MAST_CTL_ARB_EN;
+
+ if ((cpu == CPU_7400) ||
+ (cpu == CPU_7410) || (cpu == CPU_7455) || (cpu == CPU_7450)) {
+
+ tmp |= CPU_MAST_CTL_CLEAN_BLK;
+ tmp |= CPU_MAST_CTL_FLUSH_BLK;
+
+ } else {
+ /* cleanblock must be cleared for CPUs
+ * that do not support this command (603e, 750)
+ * see Res#1 */
+ tmp &= ~CPU_MAST_CTL_CLEAN_BLK;
+ tmp &= ~CPU_MAST_CTL_FLUSH_BLK;
+ }
+ GT_REG_WRITE (CPU_MASTER_CONTROL, tmp);
+}
+
+/*
+ * board_early_init_f.
+ *
+ * set up gal. device mappings, etc.
+ */
+int board_early_init_f (void)
+{
+
+ /*
+ * set up the GT the way the kernel wants it
+ * the call to move the GT register space will obviously
+ * fail if it has already been done, but we're going to assume
+ * that if it's not at the power-on location, it's where we put
+ * it last time. (huber)
+ */
+
+ my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+
+ /* No PCI in first release of Port To_do: enable it. */
+#ifdef CONFIG_PCI
+ gt_pci_config ();
+#endif
+ /* mask all external interrupt sources */
+ GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (CPU_INTERRUPT_MASK_REGISTER_HIGH, 0);
+ /* new in MV6436x */
+ GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (CPU_INTERRUPT_1_MASK_REGISTER_HIGH, 0);
+ /* --------------------- */
+ GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+ GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0);
+ GT_REG_WRITE (PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH, 0);
+ /* does not exist in MV6436x
+ GT_REG_WRITE(CPU_INT_0_MASK, 0);
+ GT_REG_WRITE(CPU_INT_1_MASK, 0);
+ GT_REG_WRITE(CPU_INT_2_MASK, 0);
+ GT_REG_WRITE(CPU_INT_3_MASK, 0);
+ --------------------- */
+
+
+ /* ----- DEVICE BUS SETTINGS ------ */
+
+ /*
+ * EVB
+ * 0 - SRAM ????
+ * 1 - RTC ????
+ * 2 - UART ????
+ * 3 - Flash checked 32Bit Intel Strata
+ * boot - BootCS checked 8Bit 29LV040B
+ *
+ */
+
+ /*
+ * the dual 7450 module requires burst access to the boot
+ * device, so the serial rom copies the boot device to the
+ * on-board sram on the eval board, and updates the correct
+ * registers to boot from the sram. (device0)
+ */
+
+ memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+ memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
+ memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
+ memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+
+
+ /* configure device timing */
+ GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+ GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+ GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_DEV3_PAR);
+
+#ifdef CFG_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
+ /* detect if we are booting from the 32 bit flash */
+ if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
+ /* 32 bit boot flash */
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
+ CFG_32BIT_BOOT_PAR);
+ } else {
+ /* 8 bit boot flash */
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+ }
+#else
+ /* 8 bit boot flash only */
+/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+#endif
+
+
+ gt_cpu_config ();
+
+ /* MPP setup */
+ GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
+ GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
+ GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
+ GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+
+ GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+ DEBUG_LED0_ON ();
+ DEBUG_LED1_ON ();
+ DEBUG_LED2_ON ();
+
+ return 0;
+}
+
+/* various things to do after relocation */
+
+int misc_init_r ()
+{
+ icache_enable ();
+#ifdef CFG_L2
+ l2cache_enable ();
+#endif
+#ifdef CONFIG_MPSC
+
+ mpsc_sdma_init ();
+ mpsc_init2 ();
+#endif
+
+#if 0
+ /* disable the dcache and MMU */
+ dcache_lock ();
+#endif
+ return 0;
+}
+
+void after_reloc (ulong dest_addr, gd_t * gd)
+{
+
+ memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
+
+ display_mem_map ();
+ /* now, jump to the main ppcboot board init code */
+ board_init_r (gd, dest_addr);
+ /* NOTREACHED */
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ *
+ * right now, assume borad type. (there is just one...after all)
+ */
+
+int checkboard (void)
+{
+ int l_type = 0;
+
+ printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ return (l_type);
+}
+
+/* utility functions */
+void debug_led (int led, int mode)
+{
+}
+
+int display_mem_map (void)
+{
+ int i, j;
+ unsigned int base, size, width;
+
+ /* SDRAM */
+ printf ("SD (DDR) RAM\n");
+ for (i = 0; i <= BANK3; i++) {
+ base = memoryGetBankBaseAddress (i);
+ size = memoryGetBankSize (i);
+ if (size != 0) {
+ printf ("BANK%d: base - 0x%08x\tsize - %dM bytes\n",
+ i, base, size >> 20);
+ }
+ }
+#ifdef CONFIG_PCI
+ /* CPU's PCI windows */
+ for (i = 0; i <= PCI_HOST1; i++) {
+ printf ("\nCPU's PCI %d windows\n", i);
+ base = pciGetSpaceBase (i, PCI_IO);
+ size = pciGetSpaceSize (i, PCI_IO);
+ printf (" IO: base - 0x%08x\tsize - %dM bytes\n", base,
+ size >> 20);
+ for (j = 0;
+ j <=
+ PCI_REGION0
+ /*ronen currently only first PCI MEM is used 3 */ ;
+ j++) {
+ base = pciGetSpaceBase (i, j);
+ size = pciGetSpaceSize (i, j);
+ printf ("MEMORY %d: base - 0x%08x\tsize - %dM bytes\n", j, base, size >> 20);
+ }
+ }
+#endif /* of CONFIG_PCI */
+ /* Devices */
+ printf ("\nDEVICES\n");
+ for (i = 0; i <= DEVICE3; i++) {
+ base = memoryGetDeviceBaseAddress (i);
+ size = memoryGetDeviceSize (i);
+ width = memoryGetDeviceWidth (i) * 8;
+ printf ("DEV %d: base - 0x%08x size - %dM bytes\twidth - %d bits", i, base, size >> 20, width);
+ if (i == 0)
+ printf ("\t- FLASH\n");
+ else if (i == 1)
+ printf ("\t- FLASH\n");
+ else if (i == 2)
+ printf ("\t- FLASH\n");
+ else
+ printf ("\t- RTC/REGS/CAN\n");
+ }
+
+ /* Bootrom */
+ base = memoryGetDeviceBaseAddress (BOOT_DEVICE); /* Boot */
+ size = memoryGetDeviceSize (BOOT_DEVICE);
+ width = memoryGetDeviceWidth (BOOT_DEVICE) * 8;
+ printf (" BOOT: base - 0x%08x size - %dM bytes\twidth - %d bits\t- FLASH\n",
+ base, size >> 20, width);
+ return (0);
+}
+
+/* DRAM check routines copied from gw8260 */
+
+#if defined (CFG_DRAM_TEST)
+
+/*********************************************************************/
+/* NAME: move64() - moves a double word (64-bit) */
+/* */
+/* DESCRIPTION: */
+/* this function performs a double word move from the data at */
+/* the source pointer to the location at the destination pointer. */
+/* */
+/* INPUTS: */
+/* unsigned long long *src - pointer to data to move */
+/* */
+/* OUTPUTS: */
+/* unsigned long long *dest - pointer to locate to move data */
+/* */
+/* RETURNS: */
+/* None */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* May cloober fr0. */
+/* */
+/*********************************************************************/
+static void move64 (unsigned long long *src, unsigned long long *dest)
+{
+ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : : "fr0"); /* Clobbers fr0 */
+ return;
+}
+
+
+#if defined (CFG_DRAM_TEST_DATA)
+
+unsigned long long pattern[] = {
+ 0xaaaaaaaaaaaaaaaa,
+ 0xcccccccccccccccc,
+ 0xf0f0f0f0f0f0f0f0,
+ 0xff00ff00ff00ff00,
+ 0xffff0000ffff0000,
+ 0xffffffff00000000,
+ 0x00000000ffffffff,
+ 0x0000ffff0000ffff,
+ 0x00ff00ff00ff00ff,
+ 0x0f0f0f0f0f0f0f0f,
+ 0x3333333333333333,
+ 0x5555555555555555
+};
+
+/*********************************************************************/
+/* NAME: mem_test_data() - test data lines for shorts and opens */
+/* */
+/* DESCRIPTION: */
+/* Tests data lines for shorts and opens by forcing adjacent data */
+/* to opposite states. Because the data lines could be routed in */
+/* an arbitrary manner the must ensure test patterns ensure that */
+/* every case is tested. By using the following series of binary */
+/* patterns every combination of adjacent bits is test regardless */
+/* of routing. */
+/* */
+/* ...101010101010101010101010 */
+/* ...110011001100110011001100 */
+/* ...111100001111000011110000 */
+/* ...111111110000000011111111 */
+/* */
+/* Carrying this out, gives us six hex patterns as follows: */
+/* */
+/* 0xaaaaaaaaaaaaaaaa */
+/* 0xcccccccccccccccc */
+/* 0xf0f0f0f0f0f0f0f0 */
+/* 0xff00ff00ff00ff00 */
+/* 0xffff0000ffff0000 */
+/* 0xffffffff00000000 */
+/* */
+/* The number test patterns will always be given by: */
+/* */
+/* log(base 2)(number data bits) = log2 (64) = 6 */
+/* */
+/* To test for short and opens to other signals on our boards. we */
+/* simply */
+/* test with the 1's complemnt of the paterns as well. */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* Assumes only one one SDRAM bank */
+/* */
+/*********************************************************************/
+int mem_test_data (void)
+{
+ unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+ unsigned long long temp64;
+ int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
+ int i;
+ unsigned int hi, lo;
+
+ for (i = 0; i < num_patterns; i++) {
+ move64 (&(pattern[i]), pmem);
+ move64 (pmem, &temp64);
+
+ /* hi = (temp64>>32) & 0xffffffff; */
+ /* lo = temp64 & 0xffffffff; */
+ /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+
+ hi = (pattern[i] >> 32) & 0xffffffff;
+ lo = pattern[i] & 0xffffffff;
+ /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
+
+ if (temp64 != pattern[i]) {
+ printf ("\n Data Test Failed, pattern 0x%08x%08x",
+ hi, lo);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_DATA */
+
+#if defined (CFG_DRAM_TEST_ADDRESS)
+/*********************************************************************/
+/* NAME: mem_test_address() - test address lines */
+/* */
+/* DESCRIPTION: */
+/* This function performs a test to verify that each word im */
+/* memory is uniquly addressable. The test sequence is as follows: */
+/* */
+/* 1) write the address of each word to each word. */
+/* 2) verify that each location equals its address */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern and address */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_test_address (void)
+{
+ volatile unsigned int *pmem =
+ (volatile unsigned int *) CFG_MEMTEST_START;
+ const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+ unsigned int i;
+
+ /* write address to each location */
+ for (i = 0; i < size; i++) {
+ pmem[i] = i;
+ }
+
+ /* verify each loaction */
+ for (i = 0; i < size; i++) {
+ if (pmem[i] != i) {
+ printf ("\n Address Test Failed at 0x%x", i);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_ADDRESS */
+
+#if defined (CFG_DRAM_TEST_WALK)
+/*********************************************************************/
+/* NAME: mem_march() - memory march */
+/* */
+/* DESCRIPTION: */
+/* Marches up through memory. At each location verifies rmask if */
+/* read = 1. At each location write wmask if write = 1. Displays */
+/* failing address and pattern. */
+/* */
+/* INPUTS: */
+/* volatile unsigned long long * base - start address of test */
+/* unsigned int size - number of dwords(64-bit) to test */
+/* unsigned long long rmask - read verify mask */
+/* unsigned long long wmask - wrtie verify mask */
+/* short read - verifies rmask if read = 1 */
+/* short write - writes wmask if write = 1 */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern and address */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_march (volatile unsigned long long *base,
+ unsigned int size,
+ unsigned long long rmask,
+ unsigned long long wmask, short read, short write)
+{
+ unsigned int i;
+ unsigned long long temp;
+ unsigned int hitemp, lotemp, himask, lomask;
+
+ for (i = 0; i < size; i++) {
+ if (read != 0) {
+ /* temp = base[i]; */
+ move64 ((unsigned long long *) &(base[i]), &temp);
+ if (rmask != temp) {
+ hitemp = (temp >> 32) & 0xffffffff;
+ lotemp = temp & 0xffffffff;
+ himask = (rmask >> 32) & 0xffffffff;
+ lomask = rmask & 0xffffffff;
+
+ printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
+ return 1;
+ }
+ }
+ if (write != 0) {
+ /* base[i] = wmask; */
+ move64 (&wmask, (unsigned long long *) &(base[i]));
+ }
+ }
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_WALK */
+
+/*********************************************************************/
+/* NAME: mem_test_walk() - a simple walking ones test */
+/* */
+/* DESCRIPTION: */
+/* Performs a walking ones through entire physical memory. The */
+/* test uses as series of memory marches, mem_march(), to verify */
+/* and write the test patterns to memory. The test sequence is as */
+/* follows: */
+/* 1) march writing 0000...0001 */
+/* 2) march verifying 0000...0001 , writing 0000...0010 */
+/* 3) repeat step 2 shifting masks left 1 bit each time unitl */
+/* the write mask equals 1000...0000 */
+/* 4) march verifying 1000...0000 */
+/* The test fails if any of the memory marches return a failure. */
+/* */
+/* OUTPUTS: */
+/* Displays which pass on the memory test is executing */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_test_walk (void)
+{
+ unsigned long long mask;
+ volatile unsigned long long *pmem =
+ (volatile unsigned long long *) CFG_MEMTEST_START;
+ const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+
+ unsigned int i;
+
+ mask = 0x01;
+
+ printf ("Initial Pass");
+ mem_march (pmem, size, 0x0, 0x1, 0, 1);
+
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+ for (i = 0; i < 63; i++) {
+ printf ("Pass %2d", i + 2);
+ if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
+ /*printf("mask: 0x%x, pass: %d, ", mask, i); */
+ return 1;
+ }
+ mask = mask << 1;
+ printf ("\b\b\b\b\b\b\b");
+ }
+
+ printf ("Last Pass");
+ if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
+ /* printf("mask: 0x%x", mask); */
+ return 1;
+ }
+ printf ("\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b");
+
+ return 0;
+}
+
+/*********************************************************************/
+/* NAME: testdram() - calls any enabled memory tests */
+/* */
+/* DESCRIPTION: */
+/* Runs memory tests if the environment test variables are set to */
+/* 'y'. */
+/* */
+/* INPUTS: */
+/* testdramdata - If set to 'y', data test is run. */
+/* testdramaddress - If set to 'y', address test is run. */
+/* testdramwalk - If set to 'y', walking ones test is run */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int testdram (void)
+{
+ char *s;
+ int rundata = 0;
+ int runaddress = 0;
+ int runwalk = 0;
+
+#ifdef CFG_DRAM_TEST_DATA
+ s = getenv ("testdramdata");
+ rundata = (s && (*s == 'y')) ? 1 : 0;
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+ s = getenv ("testdramaddress");
+ runaddress = (s && (*s == 'y')) ? 1 : 0;
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+ s = getenv ("testdramwalk");
+ runwalk = (s && (*s == 'y')) ? 1 : 0;
+#endif
+
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+ printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+ }
+#ifdef CFG_DRAM_TEST_DATA
+ if (rundata == 1) {
+ printf ("Test DATA ... ");
+ if (mem_test_data () == 1) {
+ printf ("failed \n");
+ return 1;
+ } else
+ printf ("ok \n");
+ }
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+ if (runaddress == 1) {
+ printf ("Test ADDRESS ... ");
+ if (mem_test_address () == 1) {
+ printf ("failed \n");
+ return 1;
+ } else
+ printf ("ok \n");
+ }
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+ if (runwalk == 1) {
+ printf ("Test WALKING ONEs ... ");
+ if (mem_test_walk () == 1) {
+ printf ("failed \n");
+ return 1;
+ } else
+ printf ("ok \n");
+ }
+#endif
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+ printf ("passed\n");
+ }
+ return 0;
+
+}
+#endif /* CFG_DRAM_TEST */
+
+/* ronen - the below functions are used by the bootm function */
+/* - we map the base register to fbe00000 (same mapping as in the LSP) */
+/* - we turn off the RX gig dmas - to prevent the dma from overunning */
+/* the kernel data areas. */
+/* - we diable and invalidate the icache and dcache. */
+void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
+{
+ u32 temp;
+
+ temp = in_le32 ((u32 *) (new_loc + INTERNAL_SPACE_DECODE));
+ if ((temp & 0xffff) == new_loc >> 16)
+ return;
+
+ temp = (in_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE)) &
+ 0xffff0000) | (new_loc >> 16);
+
+ out_le32 ((u32 *) (cur_loc + INTERNAL_SPACE_DECODE), temp);
+
+ while ((WORD_SWAP (*((volatile unsigned int *) (NONE_CACHEABLE |
+ new_loc |
+ (INTERNAL_SPACE_DECODE)))))
+ != temp);
+
+}
+
+void board_prebootm_init ()
+{
+
+/* change window size of PCI1 IO in order tp prevent overlaping with REG BASE. */
+ GT_REG_WRITE (PCI_1_IO_SIZE, (_64K - 1) >> 16);
+
+/* Stop GigE Rx DMA engines */
+ GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (0), 0x0000ff00);
+/* GT_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (1), 0x0000ff00); */
+/* GV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00); */
+
+/* Relocate MV64360 internal regs */
+ my_remap_gt_regs_bootm (CFG_GT_REGS, CFG_DFL_GT_REGS);
+
+ icache_disable ();
+ invalidate_l1_instruction_cache ();
+ flush_data_cache ();
+ dcache_disable ();
+}
diff --git a/board/esd/cpci750/eth.h b/board/esd/cpci750/eth.h
new file mode 100644
index 0000000..aab32d2
--- /dev/null
+++ b/board/esd/cpci750/eth.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __EVB64360_ETH_H__
+#define __EVB64360_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+
+
+int db64360_eth0_poll(void);
+int db64360_eth0_transmit(unsigned int s, volatile char *p);
+void db64360_eth0_disable(void);
+bool network_start(bd_t *bis);
+
+
+#endif /* __EVB64360_ETH_H__ */
diff --git a/board/esd/cpci750/i2c.c b/board/esd/cpci750/i2c.c
new file mode 100644
index 0000000..fcec78e
--- /dev/null
+++ b/board/esd/cpci750/i2c.c
@@ -0,0 +1,487 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the DB64360 board by Ingo.Assmus@keymile.com
+ * extra improvments by Brain Waite
+ * for cpci750 by reinhard.arlt@esd-electronics.com
+ */
+#include <common.h>
+#include <mpc8xx.h>
+#include <malloc.h>
+#include "../../Marvell/include/mv_gen_reg.h"
+#include "../../Marvell/include/core.h"
+
+#define I2C_DELAY 100
+#undef DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+/* Assuming that there is only one master on the bus (us) */
+
+static void i2c_init (int speed, int slaveaddr)
+{
+ unsigned int n, m, freq, margin, power;
+ unsigned int actualN = 0, actualM = 0;
+ unsigned int minMargin = 0xffffffff;
+ unsigned int tclk = CFG_TCLK;
+ unsigned int i2cFreq = speed; /* 100000 max. Fast mode not supported */
+
+ DP (puts ("i2c_init\n"));
+/* gtI2cMasterInit */
+ for (n = 0; n < 8; n++) {
+ for (m = 0; m < 16; m++) {
+ power = 2 << n; /* power = 2^(n+1) */
+ freq = tclk / (10 * (m + 1) * power);
+ if (i2cFreq > freq)
+ margin = i2cFreq - freq;
+ else
+ margin = freq - i2cFreq;
+ if (margin < minMargin) {
+ minMargin = margin;
+ actualN = n;
+ actualM = m;
+ }
+ }
+ }
+
+ DP (puts ("setup i2c bus\n"));
+
+ /* Setup bus */
+ /* gtI2cReset */
+ GT_REG_WRITE (I2C_SOFT_RESET, 0);
+ asm(" sync");
+ GT_REG_WRITE (I2C_CONTROL, 0);
+ asm(" sync");
+
+ DP (puts ("set baudrate\n"));
+
+ GT_REG_WRITE (I2C_STATUS_BAUDE_RATE, (actualM << 3) | actualN);
+ asm(" sync");
+
+ DP (puts ("udelay...\n"));
+
+ udelay (I2C_DELAY);
+
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 2) | (0x1 << 6));
+ asm(" sync");
+}
+
+
+static uchar i2c_select_device (uchar dev_addr, uchar read, int ten_bit)
+{
+ unsigned int status, data, bits = 7;
+ unsigned int control;
+ int count = 0;
+
+ DP (puts ("i2c_select_device\n"));
+
+ /* Output slave address */
+
+ if (ten_bit) {
+ bits = 10;
+ }
+
+ GT_REG_READ (I2C_CONTROL, &control);
+ control |= (0x1 << 2);
+ GT_REG_WRITE (I2C_CONTROL, control);
+ asm(" sync");
+
+ GT_REG_READ (I2C_CONTROL, &control);
+ control |= (0x1 << 5); /* generate the I2C_START_BIT */
+ GT_REG_WRITE (I2C_CONTROL, control);
+ asm(" sync");
+ RESET_REG_BITS (I2C_CONTROL, (0x01 << 3));
+ asm(" sync");
+
+ GT_REG_READ (I2C_CONTROL, &status);
+ while ((status & 0x08) != 0x08) {
+ GT_REG_READ (I2C_CONTROL, &status);
+ }
+
+
+ count = 0;
+
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ while (((status & 0xff) != 0x08) && ((status & 0xff) != 0x10)){
+ if (count > 200) {
+#ifdef DEBUG_I2C
+ printf ("Failed to set startbit: 0x%02x\n", status);
+#endif
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */
+ asm(" sync");
+ return (status);
+ }
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+
+ DP (puts ("i2c_select_device:write addr byte\n"));
+
+ /* assert the address */
+
+ data = (dev_addr << 1);
+ /* set the read bit */
+ data |= read;
+ GT_REG_WRITE (I2C_DATA, data);
+ asm(" sync");
+ RESET_REG_BITS (I2C_CONTROL, BIT3);
+ asm(" sync");
+
+ GT_REG_READ (I2C_CONTROL, &status);
+ while ((status & 0x08) != 0x08) {
+ GT_REG_READ (I2C_CONTROL, &status);
+ }
+
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count = 0;
+ while (((status & 0xff) != 0x40) && ((status & 0xff) != 0x18)) {
+ if (count > 200) {
+#ifdef DEBUG_I2C
+ printf ("Failed to write address: 0x%02x\n", status);
+#endif
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */
+ return (status);
+ }
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ asm(" sync");
+ count++;
+ }
+
+ if (bits == 10) {
+ printf ("10 bit I2C addressing not yet implemented\n");
+ return (0xff);
+ }
+
+ return (0);
+}
+
+static uchar i2c_get_data (uchar * return_data, int len)
+{
+
+ unsigned int data, status;
+ int count = 0;
+
+ DP (puts ("i2c_get_data\n"));
+
+ while (len) {
+
+ RESET_REG_BITS (I2C_CONTROL, BIT3);
+ asm(" sync");
+
+ /* Get and return the data */
+
+ GT_REG_READ (I2C_CONTROL, &status);
+ while ((status & 0x08) != 0x08) {
+ GT_REG_READ (I2C_CONTROL, &status);
+ }
+
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ while ((status & 0xff) != 0x50) {
+ if (count > 20) {
+#ifdef DEBUG_I2C
+ printf ("Failed to get data len status: 0x%02x\n", status);
+#endif
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */
+ asm(" sync");
+ return 0;
+ }
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ GT_REG_READ (I2C_DATA, &data);
+ len--;
+ *return_data = (uchar) data;
+ return_data++;
+
+ }
+ RESET_REG_BITS (I2C_CONTROL, BIT2 | BIT3);
+ asm(" sync");
+ count = 0;
+
+ GT_REG_READ (I2C_CONTROL, &status);
+ while ((status & 0x08) != 0x08) {
+ GT_REG_READ (I2C_CONTROL, &status);
+ }
+
+ while ((status & 0xff) != 0x58) {
+ if (count > 2000) {
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */
+ return (status);
+ }
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /* stop */
+ asm(" sync");
+ RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
+ asm(" sync");
+
+ return (0);
+}
+
+
+static uchar i2c_write_data (unsigned int *data, int len)
+{
+ unsigned int status;
+ int count;
+ unsigned int temp;
+ unsigned int *temp_ptr = data;
+
+ DP (puts ("i2c_write_data\n"));
+
+ while (len) {
+ count = 0;
+ temp = (unsigned int) (*temp_ptr);
+ GT_REG_WRITE (I2C_DATA, temp);
+ asm(" sync");
+ RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
+ asm(" sync");
+
+ GT_REG_READ (I2C_CONTROL, &status);
+ while ((status & 0x08) != 0x08) {
+ GT_REG_READ (I2C_CONTROL, &status);
+ }
+
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ while ((status & 0xff) != 0x28) {
+ if (count > 200) {
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */
+ asm(" sync");
+ return (status);
+ }
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ len--;
+ temp_ptr++;
+ }
+ return (0);
+}
+
+
+static uchar i2c_write_byte (unsigned char *data, int len)
+{
+ unsigned int status;
+ int count;
+ unsigned int temp;
+ unsigned char *temp_ptr = data;
+
+ DP (puts ("i2c_write_byte\n"));
+
+ while (len) {
+ count = 0;
+ /* Set and assert the data */
+ temp = *temp_ptr;
+ GT_REG_WRITE (I2C_DATA, temp);
+ asm(" sync");
+ RESET_REG_BITS (I2C_CONTROL, (0x1 << 3));
+ asm(" sync");
+
+
+ GT_REG_READ (I2C_CONTROL, &status);
+ while ((status & 0x08) != 0x08) {
+ GT_REG_READ (I2C_CONTROL, &status);
+ }
+
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ while ((status & 0xff) != 0x28) {
+ if (count > 200) {
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4)); /*stop */
+ asm(" sync");
+ return (status);
+ }
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ len--;
+ temp_ptr++;
+ }
+ return (0);
+}
+
+static uchar
+i2c_set_dev_offset (uchar dev_addr, unsigned int offset, int ten_bit,
+ int alen)
+{
+ uchar status;
+ unsigned int table[2];
+
+ table[1] = (offset ) & 0x0ff; /* low byte */
+ table[0] = (offset >> 8) & 0x0ff; /* high byte */
+
+ DP (puts ("i2c_set_dev_offset\n"));
+
+ status = i2c_select_device (dev_addr, 0, ten_bit);
+ if (status) {
+#ifdef DEBUG_I2C
+22 printf ("Failed to select device setting offset: 0x%02x\n",
+ status);
+#endif
+ return status;
+ }
+/* check the address offset length */
+ if (alen == 0)
+ /* no address offset */
+ return (0);
+ else if (alen == 1) {
+ /* 1 byte address offset */
+ status = i2c_write_data (&offset, 1);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Failed to write data: 0x%02x\n", status);
+#endif
+ return status;
+ }
+ } else if (alen == 2) {
+ /* 2 bytes address offset */
+ status = i2c_write_data (table, 2);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Failed to write data: 0x%02x\n", status);
+#endif
+ return status;
+ }
+ } else {
+ /* address offset unknown or not supported */
+ printf ("Address length offset %d is not supported\n", alen);
+ return 1;
+ }
+ return 0; /* sucessful completion */
+}
+
+uchar
+i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
+ int len)
+{
+ uchar status = 0;
+ unsigned int i2cFreq = CFG_I2C_SPEED;
+
+ DP (puts ("i2c_read\n"));
+
+ i2c_init (i2cFreq, 0); /* set the i2c frequency */
+
+ status = i2c_set_dev_offset (dev_addr, offset, 0, alen); /* send the slave address + offset */
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Failed to set slave address & offset: 0x%02x\n",
+ status);
+#endif
+ return status;
+ }
+
+ status = i2c_select_device (dev_addr, 1, 0);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Failed to select device for data read: 0x%02x\n",
+ status);
+#endif
+ return status;
+ }
+
+ status = i2c_get_data (data, len);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Data not read: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ return 0;
+}
+
+
+void i2c_stop (void)
+{
+ GT_REG_WRITE (I2C_CONTROL, (0x1 << 4));
+ asm(" sync");
+}
+
+
+uchar
+i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
+ int len)
+{
+ uchar status = 0;
+ unsigned int i2cFreq = CFG_I2C_SPEED;
+
+ DP (puts ("i2c_write\n"));
+
+ i2c_init (i2cFreq, 0); /* set the i2c frequency */
+
+ status = i2c_set_dev_offset (dev_addr, offset, 0, alen); /* send the slave address + offset */
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Failed to set slave address & offset: 0x%02x\n",
+ status);
+#endif
+ return status;
+ }
+
+
+ status = i2c_write_byte (data, len); /* write the data */
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Data not written: 0x%02x\n", status);
+#endif
+ return status;
+ }
+ /* issue a stop bit */
+ i2c_stop ();
+ return 0;
+}
+
+
+int i2c_probe (uchar chip)
+{
+
+#ifdef DEBUG_I2C
+ unsigned int i2c_status;
+#endif
+ uchar status = 0;
+ unsigned int i2cFreq = CFG_I2C_SPEED;
+
+ DP (puts ("i2c_probe\n"));
+
+ i2c_init (i2cFreq, 0); /* set the i2c frequency */
+
+ status = i2c_set_dev_offset (chip, 0, 0, 0); /* send the slave address + no offset */
+ if (status) {
+#ifdef DEBUG_I2C
+ printf ("Failed to set slave address: 0x%02x\n", status);
+#endif
+ return (int) status;
+ }
+#ifdef DEBUG_I2C
+ GT_REG_READ (I2C_STATUS_BAUDE_RATE, &i2c_status);
+ printf ("address %#x returned %#x\n", chip, i2c_status);
+#endif
+ /* issue a stop bit */
+ i2c_stop ();
+ return 0; /* successful completion */
+}
diff --git a/board/esd/cpci750/i2c.h b/board/esd/cpci750/i2c.h
new file mode 100644
index 0000000..b669ff0
--- /dev/null
+++ b/board/esd/cpci750/i2c.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the DB64360 board by Ingo.Assmus@keymile.com
+ */
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+/* function declarations */
+uchar i2c_read(uchar, unsigned int, int, uchar*, int);
+
+#endif
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
new file mode 100644
index 0000000..7400e8d
--- /dev/null
+++ b/board/esd/cpci750/ide.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* ide.c - ide support functions */
+
+
+#include <common.h>
+#ifdef CFG_CMD_IDE
+#include <ata.h>
+#include <ide.h>
+#include <pci.h>
+
+extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+
+int ide_preinit
+ (
+ void
+ )
+ {
+ int status;
+ pci_dev_t devbusfn;
+ int l;
+
+ status = 1;
+ for(l=0;l<CFG_IDE_MAXBUS;l++)
+ {
+ ide_bus_offset[l] = -ATA_STATUS;
+ }
+ devbusfn = pci_find_device(0x1103, 0x0004, 0);
+ if (devbusfn != -1)
+ {
+ status = 0;
+
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (u32 *)&ide_bus_offset[0]);
+ ide_bus_offset[0] &= 0xfffffffe;
+ ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, (u32 *)&ide_bus_offset[1]);
+ ide_bus_offset[1] &= 0xfffffffe;
+ ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+ }
+ return(status);
+ }
+
+void ide_set_reset
+ (
+ int flag
+ )
+ {
+ return;
+ }
+
+#endif /* of CONFIG_CMDS_IDE */
diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h
new file mode 100644
index 0000000..1beb7e2
--- /dev/null
+++ b/board/esd/cpci750/local.h
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * include/local.h - local configuration options, board specific
+ */
+
+#ifndef __LOCAL_H
+#define __LOCAL_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+/* This tells PPCBoot that the config options are compiled in */
+/* #undef ENV_IS_EMBEDDED */
+/* Don't touch this! PPCBOOT figures this out based on other
+ * magic. */
+
+/* Uncomment and define any of the below options */
+
+/* #define CONFIG_750CX */ /* The 750CX doesn't support as many things in L2CR */
+#define CONFIG_750FX /* The 750FX doesn't support as many things in L2CR like 750CX*/
+
+/* These want string arguments */
+/* #define CONFIG_BOOTARGS */
+/* #define CONFIG_BOOTCOMMAND */
+/* #define CONFIG_RAMBOOTCOMMAND */
+/* #define CONFIG_NFSBOOTCOMMAND */
+/* #define CFG_AUTOLOAD */
+/* #define CONFIG_PREBOOT */
+
+/* These don't */
+
+/* #define CONFIG_BOOTDELAY */
+/* #define CONFIG_BAUDRATE */
+/* #define CONFIG_LOADS_ECHO */
+/* #define CONFIG_ETHADDR */
+/* #define CONFIG_ETH2ADDR */
+/* #define CONFIG_ETH3ADDR */
+/* #define CONFIG_IPADDR */
+/* #define CONFIG_SERVERIP */
+/* #define CONFIG_ROOTPATH */
+/* #define CONFIG_GATEWAYIP */
+/* #define CONFIG_NETMASK */
+/* #define CONFIG_HOSTNAME */
+/* #define CONFIG_BOOTFILE */
+/* #define CONFIG_LOADADDR */
+
+/* these hardware addresses are pretty bogus, please change them to
+ suit your needs */
+
+/* first ethernet */
+/* #define CONFIG_ETHADDR 86:06:2d:7e:c6:53 */
+#define CONFIG_ETHADDR 64:36:00:00:00:01
+
+/* next two ethernet hwaddrs */
+#define CONFIG_ETH1ADDR 86:06:2d:7e:c6:54
+#define CONFIG_ETH2ADDR 86:06:2d:7e:c6:55
+
+#define CONFIG_ENV_OVERWRITE
+#endif /* __CONFIG_H */
diff --git a/board/esd/cpci750/misc.S b/board/esd/cpci750/misc.S
new file mode 100644
index 0000000..ec5d9ec
--- /dev/null
+++ b/board/esd/cpci750/misc.S
@@ -0,0 +1,245 @@
+#include <config.h>
+#include <74xx_7xx.h>
+#include "version.h"
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#include "../../Marvell/include/mv_gen_reg.h"
+
+#ifdef CONFIG_ECC
+ /* Galileo specific asm code for initializing ECC */
+ .globl board_relocate_rom
+board_relocate_rom:
+ mflr r7
+ /* update the location of the GT registers */
+ lis r11, CFG_GT_REGS@h
+ /* if we're using ECC, we must use the DMA engine to copy ourselves */
+ bl start_idma_transfer_0
+ bl wait_for_idma_0
+ bl stop_idma_engine_0
+
+ mtlr r7
+ blr
+
+ .globl board_init_ecc
+board_init_ecc:
+ mflr r7
+ /* NOTE: r10 still contains the location we've been relocated to
+ * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+
+ /* now that we're running from ram, init the rest of main memory
+ * for ECC use */
+ lis r8, CFG_MONITOR_LEN@h
+ ori r8, r8, CFG_MONITOR_LEN@l
+
+ divw r3, r10, r8
+
+ /* set up the counter, and init the starting address */
+ mtctr r3
+ li r12, 0
+
+ /* bytes per transfer */
+ mr r5, r8
+about_to_init_ecc:
+1: mr r3, r12
+ mr r4, r12
+ bl start_idma_transfer_0
+ bl wait_for_idma_0
+ bl stop_idma_engine_0
+ add r12, r12, r8
+ bdnz 1b
+
+ mtlr r7
+ blr
+
+ /* r3: dest addr
+ * r4: source addr
+ * r5: byte count
+ * r11: gt regbase
+ * trashes: r6, r5
+ */
+start_idma_transfer_0:
+ /* set the byte count, including the OWN bit */
+ mr r6, r11
+ ori r6, r6, CHANNEL0_DMA_BYTE_COUNT
+ stwbrx r5, 0, (r6)
+
+ /* set the source address */
+ mr r6, r11
+ ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
+ stwbrx r4, 0, (r6)
+
+ /* set the dest address */
+ mr r6, r11
+ ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
+ stwbrx r3, 0, (r6)
+
+ /* set the next record pointer */
+ li r5, 0
+ mr r6, r11
+ ori r6, r6, CHANNEL0NEXT_RECORD_POINTER
+ stwbrx r5, 0, (r6)
+
+ /* set the low control register */
+ /* bit 9 is NON chained mode, bit 31 is new style descriptors.
+ bit 12 is channel enable */
+ ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
+ /* 15 shifted by 16 (oris) == bit 31 */
+ oris r5, r5, (1 << 15)
+ mr r6, r11
+ ori r6, r6, CHANNEL0CONTROL
+ stwbrx r5, 0, (r6)
+
+ blr
+
+ /* this waits for the bytecount to return to zero, indicating
+ * that the trasfer is complete */
+wait_for_idma_0:
+ mr r5, r11
+ lis r6, 0xff
+ ori r6, r6, 0xffff
+ ori r5, r5, CHANNEL0_DMA_BYTE_COUNT
+1: lwbrx r4, 0, (r5)
+ and. r4, r4, r6
+ bne 1b
+
+ blr
+
+ /* this turns off channel 0 of the idma engine */
+stop_idma_engine_0:
+ /* shut off the DMA engine */
+ li r5, 0
+ mr r6, r11
+ ori r6, r6, CHANNEL0CONTROL
+ stwbrx r5, 0, (r6)
+
+ blr
+#endif
+
+#ifdef CFG_BOARD_ASM_INIT
+ /* NOTE: trashes r3-r7 */
+ .globl board_asm_init
+board_asm_init:
+ /* just move the GT registers to where they belong */
+ lis r3, CFG_DFL_GT_REGS@h
+ ori r3, r3, CFG_DFL_GT_REGS@l
+ lis r4, CFG_GT_REGS@h
+ ori r4, r4, CFG_GT_REGS@l
+ li r5, INTERNAL_SPACE_DECODE
+
+ /* test to see if we've already moved */
+ lwbrx r6, r5, r4
+ andi. r6, r6, 0xffff
+ /* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
+/* rlwinm r7, r4, 8, 16, 31
+ rlwinm r7, r4, 12, 16, 31 */ /* original */
+ rlwinm r7, r4, 16, 16, 31
+ /* -----------------------------------------------------*/
+ cmp cr0, r7, r6
+ beqlr
+
+ /* nope, have to move the registers */
+ lwbrx r6, r5, r3
+ andis. r6, r6, 0xffff
+ or r6, r6, r7
+ stwbrx r6, r5, r3
+
+ /* now, poll for the change */
+1: lwbrx r7, r5, r4
+ cmp cr0, r7, r6
+ bne 1b
+
+ lis r3, CFG_INT_SRAM_BASE@h
+ ori r3, r3, CFG_INT_SRAM_BASE@l
+ rlwinm r3, r3, 16, 16, 31
+ lis r4, CFG_GT_REGS@h
+ ori r4, r4, CFG_GT_REGS@l
+ li r5, INTEGRATED_SRAM_BASE_ADDR
+ stwbrx r3, r5, r4
+
+2: lwbrx r6, r5, r4
+ cmp cr0, r3, r6
+ bne 2b
+
+ /* done! */
+ blr
+#endif
+
+/* For use of the debug LEDs */
+ .global led_on0_relocated
+led_on0_relocated:
+ xor r21, r21, r21
+ xor r18, r18, r18
+ lis r18, 0xFC80
+ ori r18, r18, 0x8000
+/* stw r21, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off0_relocated
+led_off0_relocated:
+ xor r21, r21, r21
+ xor r18, r18, r18
+ lis r18, 0xFC81
+ ori r18, r18, 0x4000
+/* stw r21, 0x0(r18) */
+ sync
+ blr
+
+ .global led_on0
+led_on0:
+ xor r18, r18, r18
+ lis r18, 0x1c80
+ ori r18, r18, 0x8000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off0
+led_off0:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0x4000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_on1
+led_on1:
+ xor r18, r18, r18
+ lis r18, 0x1c80
+ ori r18, r18, 0xc000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off1
+led_off1:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0x8000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_on2
+led_on2:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0x0000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
+
+ .global led_off2
+led_off2:
+ xor r18, r18, r18
+ lis r18, 0x1c81
+ ori r18, r18, 0xc000
+/* stw r18, 0x0(r18) */
+ sync
+ blr
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
new file mode 100644
index 0000000..52398b2
--- /dev/null
+++ b/board/esd/cpci750/mpsc.c
@@ -0,0 +1,1018 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ ************************************************************************/
+
+/*
+ * mpsc.c - driver for console over the MPSC.
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <asm/cache.h>
+
+#include <malloc.h>
+#include "mpsc.h"
+
+#include "mv_regs.h"
+
+#include "../../Marvell/include/memory.h"
+
+/* Define this if you wish to use the MPSC as a register based UART.
+ * This will force the serial port to not use the SDMA engine at all.
+ */
+
+#undef CONFIG_MPSC_DEBUG_PORT
+
+
+int (*mpsc_putchar) (char ch) = mpsc_putchar_early;
+char (*mpsc_getchar) (void) = mpsc_getchar_debug;
+int (*mpsc_test_char) (void) = mpsc_test_char_debug;
+
+
+static volatile unsigned int *rx_desc_base = NULL;
+static unsigned int rx_desc_index = 0;
+static volatile unsigned int *tx_desc_base = NULL;
+static unsigned int tx_desc_index = 0;
+
+/* local function declarations */
+static int galmpsc_connect (int channel, int connect);
+static int galmpsc_route_rx_clock (int channel, int brg);
+static int galmpsc_route_tx_clock (int channel, int brg);
+static int galmpsc_write_config_regs (int mpsc, int mode);
+static int galmpsc_config_channel_regs (int mpsc);
+static int galmpsc_set_char_length (int mpsc, int value);
+static int galmpsc_set_stop_bit_length (int mpsc, int value);
+static int galmpsc_set_parity (int mpsc, int value);
+static int galmpsc_enter_hunt (int mpsc);
+static int galmpsc_set_brkcnt (int mpsc, int value);
+static int galmpsc_set_tcschar (int mpsc, int value);
+static int galmpsc_set_snoop (int mpsc, int value);
+static int galmpsc_shutdown (int mpsc);
+
+static int galsdma_set_RFT (int channel);
+static int galsdma_set_SFM (int channel);
+static int galsdma_set_rxle (int channel);
+static int galsdma_set_txle (int channel);
+static int galsdma_set_burstsize (int channel, unsigned int value);
+static int galsdma_set_RC (int channel, unsigned int value);
+
+static int galbrg_set_CDV (int channel, int value);
+static int galbrg_enable (int channel);
+static int galbrg_disable (int channel);
+static int galbrg_set_clksrc (int channel, int value);
+static int galbrg_set_CUV (int channel, int value);
+
+static void galsdma_enable_rx (void);
+static int galsdma_set_mem_space (unsigned int memSpace,
+ unsigned int memSpaceTarget,
+ unsigned int memSpaceAttr,
+ unsigned int baseAddress,
+ unsigned int size);
+
+
+#define SOFTWARE_CACHE_MANAGEMENT
+
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
+#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
+#else
+#define FLUSH_DCACHE(a,b)
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
+#define INVALIDATE_DCACHE(a,b)
+#endif
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+static void mpsc_debug_init (void)
+{
+
+ volatile unsigned int temp;
+
+ /* Clear the CFR (CHR4) */
+ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
+ temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
+ temp &= 0xffffff00;
+ temp |= BIT29;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
+ temp);
+
+ /* Set the Valid bit 'V' (bit 12) and int generation bit 'INT' (bit 15) */
+ temp = GTREGREAD (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP));
+ temp |= (BIT12 | BIT15);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (CHANNEL * GALMPSC_REG_GAP),
+ temp);
+
+ /* Set int mask */
+ temp = GTREGREAD (GALMPSC_0_INT_MASK);
+ temp |= BIT6;
+ GT_REG_WRITE (GALMPSC_0_INT_MASK, temp);
+}
+#endif
+
+char mpsc_getchar_debug (void)
+{
+ volatile int temp;
+ volatile unsigned int cause;
+
+ cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+ while ((cause & BIT6) == 0) {
+ cause = GTREGREAD (GALMPSC_0_INT_CAUSE);
+ }
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_10 +
+ (CHANNEL * GALMPSC_REG_GAP));
+ /* By writing 1's to the set bits, the register is cleared */
+ GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (CHANNEL * GALMPSC_REG_GAP),
+ temp);
+ GT_REG_WRITE (GALMPSC_0_INT_CAUSE, cause & ~BIT6);
+ return (temp >> 16) & 0xff;
+}
+
+/* special function for running out of flash. doesn't modify any
+ * global variables [josh] */
+int mpsc_putchar_early (char ch)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int mpsc = CHANNEL;
+ int temp =
+ GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ galmpsc_set_tcschar (mpsc, ch);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP),
+ temp | 0x200);
+
+#define MAGIC_FACTOR (10*1000000)
+
+ udelay (MAGIC_FACTOR / gd->baudrate);
+ return 0;
+}
+
+/* This is used after relocation, see serial.c and mpsc_init2 */
+static int mpsc_putchar_sdma (char ch)
+{
+ volatile unsigned int *p;
+ unsigned int temp;
+
+
+ /* align the descriptor */
+ p = tx_desc_base;
+ memset ((void *) p, 0, 8 * sizeof (unsigned int));
+
+ /* fill one 64 bit buffer */
+ /* word swap, pad with 0 */
+ p[4] = 0; /* x */
+ p[5] = (unsigned int) ch; /* x */
+
+ /* CHANGED completely according to GT64260A dox - NTL */
+ p[0] = 0x00010001; /* 0 */
+ p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* 4 */
+ p[2] = 0; /* 8 */
+ p[3] = (unsigned int) &p[4]; /* c */
+
+#if 0
+ p[9] = DESC_FIRST | DESC_LAST;
+ p[10] = (unsigned int) &p[0];
+ p[11] = (unsigned int) &p[12];
+#endif
+
+ FLUSH_DCACHE (&p[0], &p[8]);
+
+ GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+ (unsigned int) &p[0]);
+ GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+ (unsigned int) &p[0]);
+
+ temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+ temp |= (TX_DEMAND | TX_STOP);
+ GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+ INVALIDATE_DCACHE (&p[1], &p[2]);
+
+ while (p[1] & DESC_OWNER_BIT) {
+ udelay (100);
+ INVALIDATE_DCACHE (&p[1], &p[2]);
+ }
+ return 0;
+}
+
+char mpsc_getchar_sdma (void)
+{
+ static unsigned int done = 0;
+ volatile char ch;
+ unsigned int len = 0, idx = 0, temp;
+
+ volatile unsigned int *p;
+
+
+ do {
+ p = &rx_desc_base[rx_desc_index * 8];
+
+ INVALIDATE_DCACHE (&p[0], &p[1]);
+ /* Wait for character */
+ while (p[1] & DESC_OWNER_BIT) {
+ udelay (100);
+ INVALIDATE_DCACHE (&p[0], &p[1]);
+ }
+
+ /* Handle error case */
+ if (p[1] & (1 << 15)) {
+ printf ("oops, error: %08x\n", p[1]);
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 +
+ (CHANNEL * GALMPSC_REG_GAP));
+ temp |= (1 << 23);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 +
+ (CHANNEL * GALMPSC_REG_GAP), temp);
+
+ /* Can't poll on abort bit, so we just wait. */
+ udelay (100);
+
+ galsdma_enable_rx ();
+ }
+
+ /* Number of bytes left in this descriptor */
+ len = p[0] & 0xffff;
+
+ if (len) {
+ /* Where to look */
+ idx = 5;
+ if (done > 3)
+ idx = 4;
+ if (done > 7)
+ idx = 7;
+ if (done > 11)
+ idx = 6;
+
+ INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
+ ch = p[idx] & 0xff;
+ done++;
+ }
+
+ if (done < len) {
+ /* this descriptor has more bytes still
+ * shift down the char we just read, and leave the
+ * buffer in place for the next time around
+ */
+ p[idx] = p[idx] >> 8;
+ FLUSH_DCACHE (&p[idx], &p[idx + 1]);
+ }
+
+ if (done == len) {
+ /* nothing left in this descriptor.
+ * go to next one
+ */
+ p[1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+ p[0] = 0x00100000;
+ FLUSH_DCACHE (&p[0], &p[1]);
+ /* Next descriptor */
+ rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+ done = 0;
+ }
+ } while (len == 0); /* galileo bug.. len might be zero */
+
+ return ch;
+}
+
+
+int mpsc_test_char_debug (void)
+{
+ if ((GTREGREAD (GALMPSC_0_INT_CAUSE) & BIT6) == 0)
+ return 0;
+ else {
+ return 1;
+ }
+}
+
+
+int mpsc_test_char_sdma (void)
+{
+ volatile unsigned int *p = &rx_desc_base[rx_desc_index * 8];
+
+ INVALIDATE_DCACHE (&p[1], &p[2]);
+
+ if (p[1] & DESC_OWNER_BIT)
+ return 0;
+ else
+ return 1;
+}
+
+int mpsc_init (int baud)
+{
+ /* BRG CONFIG */
+ galbrg_set_baudrate (CHANNEL, baud);
+ galbrg_set_clksrc (CHANNEL, 8); /* set source=Tclk */
+ galbrg_set_CUV (CHANNEL, 0); /* set up CountUpValue */
+ galbrg_enable (CHANNEL); /* Enable BRG */
+
+ /* Set up clock routing */
+ galmpsc_connect (CHANNEL, GALMPSC_CONNECT); /* connect it */
+
+ galmpsc_route_rx_clock (CHANNEL, CHANNEL); /* chosse BRG0 for Rx */
+ galmpsc_route_tx_clock (CHANNEL, CHANNEL); /* chose BRG0 for Tx */
+
+ /* reset MPSC state */
+ galmpsc_shutdown (CHANNEL);
+
+ /* SDMA CONFIG */
+ galsdma_set_burstsize (CHANNEL, L1_CACHE_BYTES / 8); /* in 64 bit words (8 bytes) */
+ galsdma_set_txle (CHANNEL);
+ galsdma_set_rxle (CHANNEL);
+ galsdma_set_RC (CHANNEL, 0xf);
+ galsdma_set_SFM (CHANNEL);
+ galsdma_set_RFT (CHANNEL);
+
+ /* MPSC CONFIG */
+ galmpsc_write_config_regs (CHANNEL, GALMPSC_UART);
+ galmpsc_config_channel_regs (CHANNEL);
+ galmpsc_set_char_length (CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */
+ galmpsc_set_parity (CHANNEL, GALMPSC_PARITY_NONE); /* N */
+ galmpsc_set_stop_bit_length (CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */
+
+#ifdef CONFIG_MPSC_DEBUG_PORT
+ mpsc_debug_init ();
+#endif
+
+ /* COMM_MPSC CONFIG */
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+ galmpsc_set_snoop (CHANNEL, 0); /* disable snoop */
+#else
+ galmpsc_set_snoop (CHANNEL, 1); /* enable snoop */
+#endif
+
+ return 0;
+}
+
+
+void mpsc_sdma_init (void)
+{
+/* Setup SDMA channel0 SDMA_CONFIG_REG*/
+ GT_REG_WRITE (SDMA_CONFIG_REG (0), 0x000020ff);
+
+/* Enable MPSC-Window0 for DRAM Bank0 */
+ if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT,
+ MV64360_SDMA_DRAM_CS_0_TARGET,
+ 0,
+ memoryGetBankBaseAddress
+ (CS_0_LOW_DECODE_ADDRESS),
+ memoryGetBankSize (BANK0)) != true)
+ printf ("%s: SDMA_Window0 memory setup failed !!! \n",
+ __FUNCTION__);
+
+
+/* Disable MPSC-Window1 */
+ if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_1_BIT,
+ MV64360_SDMA_DRAM_CS_0_TARGET,
+ 0,
+ memoryGetBankBaseAddress
+ (CS_1_LOW_DECODE_ADDRESS),
+ memoryGetBankSize (BANK3)) != true)
+ printf ("%s: SDMA_Window1 memory setup failed !!! \n",
+ __FUNCTION__);
+
+
+/* Disable MPSC-Window2 */
+ if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_2_BIT,
+ MV64360_SDMA_DRAM_CS_0_TARGET,
+ 0,
+ memoryGetBankBaseAddress
+ (CS_2_LOW_DECODE_ADDRESS),
+ memoryGetBankSize (BANK3)) != true)
+ printf ("%s: SDMA_Window2 memory setup failed !!! \n",
+ __FUNCTION__);
+
+
+/* Disable MPSC-Window3 */
+ if (galsdma_set_mem_space (MV64360_CUNIT_BASE_ADDR_WIN_3_BIT,
+ MV64360_SDMA_DRAM_CS_0_TARGET,
+ 0,
+ memoryGetBankBaseAddress
+ (CS_3_LOW_DECODE_ADDRESS),
+ memoryGetBankSize (BANK3)) != true)
+ printf ("%s: SDMA_Window3 memory setup failed !!! \n",
+ __FUNCTION__);
+
+/* Setup MPSC0 access mode Window0 full access */
+ GT_SET_REG_BITS (MPSC0_ACCESS_PROTECTION_REG,
+ (MV64360_SDMA_WIN_ACCESS_FULL <<
+ (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+/* Setup MPSC1 access mode Window1 full access */
+ GT_SET_REG_BITS (MPSC1_ACCESS_PROTECTION_REG,
+ (MV64360_SDMA_WIN_ACCESS_FULL <<
+ (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
+
+/* Setup MPSC internal address space base address */
+ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+
+/* no high address remap*/
+ GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
+ GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG1, 0x00);
+
+/* clear interrupt cause register for MPSC (fault register)*/
+ GT_REG_WRITE (CUNIT_INTERRUPT_CAUSE_REG, 0x00);
+}
+
+
+void mpsc_init2 (void)
+{
+ int i;
+
+#ifndef CONFIG_MPSC_DEBUG_PORT
+ mpsc_putchar = mpsc_putchar_sdma;
+ mpsc_getchar = mpsc_getchar_sdma;
+ mpsc_test_char = mpsc_test_char_sdma;
+#endif
+ /* RX descriptors */
+ rx_desc_base = (unsigned int *) malloc (((RX_DESC + 1) * 8) *
+ sizeof (unsigned int));
+
+ /* align descriptors */
+ rx_desc_base = (unsigned int *)
+ (((unsigned int) rx_desc_base + 32) & 0xFFFFFFF0);
+
+ rx_desc_index = 0;
+
+ memset ((void *) rx_desc_base, 0,
+ (RX_DESC * 8) * sizeof (unsigned int));
+
+ for (i = 0; i < RX_DESC; i++) {
+ rx_desc_base[i * 8 + 3] = (unsigned int) &rx_desc_base[i * 8 + 4]; /* Buffer */
+ rx_desc_base[i * 8 + 2] = (unsigned int) &rx_desc_base[(i + 1) * 8]; /* Next descriptor */
+ rx_desc_base[i * 8 + 1] = DESC_OWNER_BIT | DESC_FIRST | DESC_LAST; /* Command & control */
+ rx_desc_base[i * 8] = 0x00100000;
+ }
+ rx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &rx_desc_base[0];
+
+ FLUSH_DCACHE (&rx_desc_base[0], &rx_desc_base[RX_DESC * 8]);
+ GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR + (CHANNEL * GALSDMA_REG_DIFF),
+ (unsigned int) &rx_desc_base[0]);
+
+ /* TX descriptors */
+ tx_desc_base = (unsigned int *) malloc (((TX_DESC + 1) * 8) *
+ sizeof (unsigned int));
+
+ /* align descriptors */
+ tx_desc_base = (unsigned int *)
+ (((unsigned int) tx_desc_base + 32) & 0xFFFFFFF0);
+
+ tx_desc_index = -1;
+
+ memset ((void *) tx_desc_base, 0,
+ (TX_DESC * 8) * sizeof (unsigned int));
+
+ for (i = 0; i < TX_DESC; i++) {
+ tx_desc_base[i * 8 + 5] = (unsigned int) 0x23232323;
+ tx_desc_base[i * 8 + 4] = (unsigned int) 0x23232323;
+ tx_desc_base[i * 8 + 3] =
+ (unsigned int) &tx_desc_base[i * 8 + 4];
+ tx_desc_base[i * 8 + 2] =
+ (unsigned int) &tx_desc_base[(i + 1) * 8];
+ tx_desc_base[i * 8 + 1] =
+ DESC_OWNER_BIT | DESC_FIRST | DESC_LAST;
+
+ /* set sbytecnt and shadow byte cnt to 1 */
+ tx_desc_base[i * 8] = 0x00010001;
+ }
+ tx_desc_base[(i - 1) * 8 + 2] = (unsigned int) &tx_desc_base[0];
+
+ FLUSH_DCACHE (&tx_desc_base[0], &tx_desc_base[TX_DESC * 8]);
+
+ udelay (100);
+
+ galsdma_enable_rx ();
+
+ return;
+}
+
+int galbrg_set_baudrate (int channel, int rate)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int clock;
+
+ galbrg_disable (channel); /*ok */
+
+#ifdef ZUMA_NTL
+ /* from tclk */
+ clock = (CFG_TCLK / (16 * rate)) - 1;
+#else
+ clock = (CFG_TCLK / (16 * rate)) - 1;
+#endif
+
+ galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */
+
+ galbrg_enable (channel);
+
+ gd->baudrate = rate;
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* Below are all the private functions that no one else needs */
+
+static int galbrg_set_CDV (int channel, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp &= 0xFFFF0000;
+ temp |= (value & 0x0000FFFF);
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galbrg_enable (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp |= 0x00010000;
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galbrg_disable (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp &= 0xFFFEFFFF;
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galbrg_set_clksrc (int channel, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp &= 0xFFC3FFFF; /* Bit 18 - 21 (MV 64260 18-22) */
+ temp |= (value << 18);
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+ return 0;
+}
+
+static int galbrg_set_CUV (int channel, int value)
+{
+ /* set CountUpValue */
+ GT_REG_WRITE (GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
+
+ return 0;
+}
+
+#if 0
+static int galbrg_reset (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp |= 0x20000;
+ GT_REG_WRITE (GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+#endif
+
+static int galsdma_set_RFT (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000001;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_SFM (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000002;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_rxle (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000040;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_txle (int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp |= 0x00000080;
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_RC (int channel, unsigned int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp &= ~0x0000003c;
+ temp |= (value << 2);
+ GT_REG_WRITE (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF),
+ temp);
+
+ return 0;
+}
+
+static int galsdma_set_burstsize (int channel, unsigned int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALSDMA_0_CONF_REG + (channel * GALSDMA_REG_DIFF));
+ temp &= 0xFFFFCFFF;
+ switch (value) {
+ case 8:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x3 << 12)));
+ break;
+
+ case 4:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x2 << 12)));
+ break;
+
+ case 2:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x1 << 12)));
+ break;
+
+ case 1:
+ GT_REG_WRITE (GALSDMA_0_CONF_REG +
+ (channel * GALSDMA_REG_DIFF),
+ (temp | (0x0 << 12)));
+ break;
+
+ default:
+ return -1;
+ break;
+ }
+
+ return 0;
+}
+
+static int galmpsc_connect (int channel, int connect)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_ROUTING_REGISTER);
+
+ if ((channel == 0) && connect)
+ temp &= ~0x00000007;
+ else if ((channel == 1) && connect)
+ temp &= ~(0x00000007 << 6);
+ else if ((channel == 0) && !connect)
+ temp |= 0x00000007;
+ else
+ temp |= (0x00000007 << 6);
+
+ /* Just in case... */
+ temp &= 0x3fffffff;
+
+ GT_REG_WRITE (GALMPSC_ROUTING_REGISTER, temp);
+
+ return 0;
+}
+
+static int galmpsc_route_rx_clock (int channel, int brg)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_RxC_ROUTE);
+
+ if (channel == 0) {
+ temp &= ~0x0000000F;
+ temp |= brg;
+ } else {
+ temp &= ~0x00000F00;
+ temp |= (brg << 8);
+ }
+
+ GT_REG_WRITE (GALMPSC_RxC_ROUTE, temp);
+
+ return 0;
+}
+
+static int galmpsc_route_tx_clock (int channel, int brg)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_TxC_ROUTE);
+
+ if (channel == 0) {
+ temp &= ~0x0000000F;
+ temp |= brg;
+ } else {
+ temp &= ~0x00000F00;
+ temp |= (brg << 8);
+ }
+
+ GT_REG_WRITE (GALMPSC_TxC_ROUTE, temp);
+
+ return 0;
+}
+
+static int galmpsc_write_config_regs (int mpsc, int mode)
+{
+ if (mode == GALMPSC_UART) {
+ /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
+ GT_REG_WRITE (GALMPSC_MCONF_LOW + (mpsc * GALMPSC_REG_GAP),
+ 0x000004c4);
+
+ /* Main config reg High (32x Rx/Tx clock mode, width=8bits */
+ GT_REG_WRITE (GALMPSC_MCONF_HIGH + (mpsc * GALMPSC_REG_GAP),
+ 0x024003f8);
+ /* 22 2222 1111 */
+ /* 54 3210 9876 */
+ /* 0000 0010 0000 0000 */
+ /* 1 */
+ /* 098 7654 3210 */
+ /* 0000 0011 1111 1000 */
+ } else
+ return -1;
+
+ return 0;
+}
+
+static int galmpsc_config_channel_regs (int mpsc)
+{
+ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_3 + (mpsc * GALMPSC_REG_GAP), 1);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_5 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_6 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_7 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_8 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_9 + (mpsc * GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_10 + (mpsc * GALMPSC_REG_GAP), 0);
+
+ galmpsc_set_brkcnt (mpsc, 0x3);
+ galmpsc_set_tcschar (mpsc, 0xab);
+
+ return 0;
+}
+
+static int galmpsc_set_brkcnt (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0x0000FFFF;
+ temp |= (value << 16);
+ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_tcschar (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0xFFFF0000;
+ temp |= value;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_1 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_char_length (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0xFFFFCFFF;
+ temp |= (value << 12);
+ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_stop_bit_length (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP));
+ temp &= 0xFFFFBFFF;
+ temp |= (value << 14);
+ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_set_parity (int mpsc, int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ if (value != -1) {
+ temp &= 0xFFF3FFF3;
+ temp |= ((value << 18) | (value << 2));
+ temp |= ((value << 17) | (value << 1));
+ } else {
+ temp &= 0xFFF1FFF1;
+ }
+
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ return 0;
+}
+
+static int galmpsc_enter_hunt (int mpsc)
+{
+ int temp;
+
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ temp |= 0x80000000;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ while (GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)) &
+ MPSC_ENTER_HUNT) {
+ udelay (1);
+ }
+ return 0;
+}
+
+
+static int galmpsc_shutdown (int mpsc)
+{
+ unsigned int temp;
+
+ /* cause RX abort (clears RX) */
+ temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
+ temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
+ temp &= ~MPSC_ENTER_HUNT;
+ GT_REG_WRITE (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP), temp);
+
+ GT_REG_WRITE (GALSDMA_0_COM_REG, 0);
+ GT_REG_WRITE (GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+
+ /* shut down the MPSC */
+ GT_REG_WRITE (GALMPSC_MCONF_LOW, 0);
+ GT_REG_WRITE (GALMPSC_MCONF_HIGH, 0);
+ GT_REG_WRITE (GALMPSC_PROTOCONF_REG + (mpsc * GALMPSC_REG_GAP), 0);
+
+ udelay (100);
+
+ /* shut down the sdma engines. */
+ /* reset config to default */
+ GT_REG_WRITE (GALSDMA_0_CONF_REG, 0x000000fc);
+
+ udelay (100);
+
+ /* clear the SDMA current and first TX and RX pointers */
+ GT_REG_WRITE (GALSDMA_0_CUR_RX_PTR, 0);
+ GT_REG_WRITE (GALSDMA_0_CUR_TX_PTR, 0);
+ GT_REG_WRITE (GALSDMA_0_FIR_TX_PTR, 0);
+
+ udelay (100);
+
+ return 0;
+}
+
+static void galsdma_enable_rx (void)
+{
+ int temp;
+
+ /* Enable RX processing */
+ temp = GTREGREAD (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF));
+ temp |= RX_ENABLE;
+ GT_REG_WRITE (GALSDMA_0_COM_REG + (CHANNEL * GALSDMA_REG_DIFF), temp);
+
+ galmpsc_enter_hunt (CHANNEL);
+}
+
+static int galmpsc_set_snoop (int mpsc, int value)
+{
+ int reg =
+ mpsc ? MPSC_1_ADDRESS_CONTROL_LOW :
+ MPSC_0_ADDRESS_CONTROL_LOW;
+ int temp = GTREGREAD (reg);
+
+ if (value)
+ temp |= (1 << 6) | (1 << 14) | (1 << 22) | (1 << 30);
+ else
+ temp &= ~((1 << 6) | (1 << 14) | (1 << 22) | (1 << 30));
+ GT_REG_WRITE (reg, temp);
+ return 0;
+}
+
+/*******************************************************************************
+* galsdma_set_mem_space - Set MV64360 IDMA memory decoding map.
+*
+* DESCRIPTION:
+* the MV64360 SDMA has its own address decoding map that is de-coupled
+* from the CPU interface address decoding windows. The SDMA channels
+* share four address windows. Each region can be individually configured
+* by this function by associating it to a target interface and setting
+* base and size values.
+*
+* NOTE!!!
+* The size must be in 64Kbyte granularity.
+* The base address must be aligned to the size.
+* The size must be a series of 1s followed by a series of zeros
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* True for success, false otherwise.
+*
+*******************************************************************************/
+
+static int galsdma_set_mem_space (unsigned int memSpace,
+ unsigned int memSpaceTarget,
+ unsigned int memSpaceAttr,
+ unsigned int baseAddress, unsigned int size)
+{
+ unsigned int temp;
+
+ if (size == 0) {
+ GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
+ 1 << memSpace);
+ return true;
+ }
+
+ /* The base address must be aligned to the size. */
+ if (baseAddress % size != 0) {
+ return false;
+ }
+ if (size < 0x10000) {
+ return false;
+ }
+
+ /* Align size and base to 64K */
+ baseAddress &= 0xffff0000;
+ size &= 0xffff0000;
+ temp = size >> 16;
+
+ /* Checking that the size is a sequence of '1' followed by a
+ sequence of '0' starting from LSB to MSB. */
+ while ((temp > 0) && (temp & 0x1)) {
+ temp = temp >> 1;
+ }
+
+ if (temp != 0) {
+ GT_REG_WRITE (MV64360_CUNIT_BASE_ADDR_REG0 + memSpace * 8,
+ (baseAddress | memSpaceTarget | memSpaceAttr));
+ GT_REG_WRITE ((MV64360_CUNIT_SIZE0 + memSpace * 8),
+ (size - 1) & 0xffff0000);
+ GT_RESET_REG_BITS (MV64360_CUNIT_BASE_ADDR_ENABLE_REG,
+ 1 << memSpace);
+ } else {
+ /* An invalid size was specified */
+ return false;
+ }
+ return true;
+}
diff --git a/board/esd/cpci750/mpsc.h b/board/esd/cpci750/mpsc.h
new file mode 100644
index 0000000..a03d1cc
--- /dev/null
+++ b/board/esd/cpci750/mpsc.h
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ ************************************************************************/
+
+
+/*
+ * mpsc.h - header file for MPSC in uart mode (console driver)
+ */
+
+#ifndef __MPSC_H__
+#define __MPSC_H__
+
+/* include actual Galileo defines */
+#include "../../Marvell/include/mv_gen_reg.h"
+
+/* driver related defines */
+
+int mpsc_init(int baud);
+void mpsc_sdma_init(void);
+void mpsc_init2(void);
+int galbrg_set_baudrate(int channel, int rate);
+
+int mpsc_putchar_early(char ch);
+char mpsc_getchar_debug(void);
+int mpsc_test_char_debug(void);
+
+int mpsc_test_char_sdma(void);
+
+extern int (*mpsc_putchar)(char ch);
+extern char (*mpsc_getchar)(void);
+extern int (*mpsc_test_char)(void);
+
+#define CHANNEL CONFIG_MPSC_PORT
+
+#define TX_DESC 5
+#define RX_DESC 20
+
+#define DESC_FIRST 0x00010000
+#define DESC_LAST 0x00020000
+#define DESC_OWNER_BIT 0x80000000
+
+#define TX_DEMAND 0x00800000
+#define TX_STOP 0x00010000
+#define RX_ENABLE 0x00000080
+
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
+#define MPSC_RX_ABORT (1 << 23)
+#define MPSC_ENTER_HUNT (1 << 31)
+
+/* MPSC defines */
+
+#define GALMPSC_CONNECT 0x1
+#define GALMPSC_DISCONNECT 0x0
+
+#define GALMPSC_UART 0x1
+
+#define GALMPSC_STOP_BITS_1 0x0
+#define GALMPSC_STOP_BITS_2 0x1
+#define GALMPSC_CHAR_LENGTH_8 0x3
+#define GALMPSC_CHAR_LENGTH_7 0x2
+
+#define GALMPSC_PARITY_ODD 0x0
+#define GALMPSC_PARITY_EVEN 0x2
+#define GALMPSC_PARITY_MARK 0x3
+#define GALMPSC_PARITY_SPACE 0x1
+#define GALMPSC_PARITY_NONE -1
+
+#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */
+#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */
+#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */
+#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
+#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */
+#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */
+#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */
+
+#define GALMPSC_REG_GAP 0x1000
+
+#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */
+#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */
+#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */
+#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */
+#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */
+#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */
+#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */
+#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */
+#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */
+#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */
+#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */
+#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */
+
+#define GALSDMA_COMMAND_FIRST (1 << 16)
+#define GALSDMA_COMMAND_LAST (1 << 17)
+#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
+#define GALSDMA_COMMAND_AUTO (1 << 30)
+#define GALSDMA_COMMAND_OWNER (1 << 31)
+
+#define GALSDMA_RX 0
+#define GALSDMA_TX 1
+
+/* CHANNEL2 should be CHANNEL1, according to documentation,
+ * but to work with the current GTREGS file...
+ */
+#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */
+#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */
+#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */
+#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */
+#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */
+#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */
+#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */
+#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */
+#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */
+#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */
+#define GALSDMA_REG_DIFF 0x2000
+
+/* WRONG in gt64260R.h */
+#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */
+#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */
+#define GALMPSC_0_INT_CAUSE 0xb804
+#define GALMPSC_0_INT_MASK 0xb884
+
+#define GALSDMA_MODE_UART 0
+#define GALSDMA_MODE_BISYNC 1
+#define GALSDMA_MODE_HDLC 2
+#define GALSDMA_MODE_TRANSPARENT 3
+
+#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */
+#define GALBRG_REG_GAP 0x0008
+#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */
+
+#endif /* __MPSC_H__ */
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
new file mode 100644
index 0000000..e2719b9
--- /dev/null
+++ b/board/esd/cpci750/mv_eth.c
@@ -0,0 +1,3182 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.c - header file for the polled mode GT ethernet driver
+ */
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+
+#include "mv_eth.h"
+
+/* enable Debug outputs */
+
+#undef DEBUG_MV_ETH
+
+#ifdef DEBUG_MV_ETH
+#define DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+#undef MV64360_CHECKSUM_OFFLOAD
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The first part is the high level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+/* Definition for configuring driver */
+/* #define UPDATE_STATS_BY_SOFTWARE */
+#undef MV64360_RX_QUEUE_FILL_ON_TASK
+
+
+/* Constants */
+#define MAGIC_ETH_RUNNING 8031971
+#define MV64360_INTERNAL_SRAM_SIZE _256K
+#define EXTRA_BYTES 32
+#define WRAP ETH_HLEN + 2 + 4 + 16
+#define BUFFER_MTU dev->mtu + WRAP
+#define INT_CAUSE_UNMASK_ALL 0x0007ffff
+#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff
+#ifdef MV64360_RX_FILL_ON_TASK
+#define INT_CAUSE_MASK_ALL 0x00000000
+#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL
+#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT
+#endif
+
+/* Read/Write to/from MV64360 internal registers */
+#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
+#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
+#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
+#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
+
+/* Static function declarations */
+static int mv64360_eth_real_open (struct eth_device *eth);
+static int mv64360_eth_real_stop (struct eth_device *eth);
+static struct net_device_stats *mv64360_eth_get_stats (struct eth_device
+ *dev);
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
+static void mv64360_eth_update_stat (struct eth_device *dev);
+bool db64360_eth_start (struct eth_device *eth);
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+ unsigned int mib_offset);
+int mv64360_eth_receive (struct eth_device *dev);
+
+int mv64360_eth_xmit (struct eth_device *, volatile void *packet, int length);
+
+#ifndef UPDATE_STATS_BY_SOFTWARE
+static void mv64360_eth_print_stat (struct eth_device *dev);
+#endif
+/* Processes a received packet */
+extern void NetReceive (volatile uchar *, int);
+
+extern unsigned int INTERNAL_REG_BASE_ADDR;
+
+/*************************************************
+ *Helper functions - used inside the driver only *
+ *************************************************/
+#ifdef DEBUG_MV_ETH
+void print_globals (struct eth_device *dev)
+{
+ printf ("Ethernet PRINT_Globals-Debug function\n");
+ printf ("Base Address for ETH_PORT_INFO: %08x\n",
+ (unsigned int) dev->priv);
+ printf ("Base Address for mv64360_eth_priv: %08x\n",
+ (unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
+ port_private));
+
+ printf ("GT Internal Base Address: %08x\n",
+ INTERNAL_REG_BASE_ADDR);
+ printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64360_TX_QUEUE_SIZE);
+ printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64360_RX_QUEUE_SIZE);
+ printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n",
+ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+ p_rx_buffer_base[0],
+ (MV64360_RX_QUEUE_SIZE * MV64360_RX_BUFFER_SIZE) + 32);
+ printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n",
+ (unsigned int) ((ETH_PORT_INFO *) dev->priv)->
+ p_tx_buffer_base[0],
+ (MV64360_TX_QUEUE_SIZE * MV64360_TX_BUFFER_SIZE) + 32);
+}
+#endif
+
+#define my_cpu_to_le32(x) my_le32_to_cpu((x))
+
+unsigned long my_le32_to_cpu (unsigned long x)
+{
+ return (((x & 0x000000ffU) << 24) |
+ ((x & 0x0000ff00U) << 8) |
+ ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
+}
+
+
+/**********************************************************************
+ * mv64360_eth_print_phy_status
+ *
+ * Prints gigabit ethenret phy status
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64360_eth_print_phy_status (struct eth_device *dev)
+{
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+ ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ unsigned int port_status, phy_reg_data;
+
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Check Link status on phy */
+ eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+ if (!(phy_reg_data & 0x20)) {
+ printf ("Ethernet port changed link status to DOWN\n");
+ } else {
+ port_status =
+ MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
+ printf ("Ethernet status port %d: Link up", port_num);
+ printf (", %s",
+ (port_status & BIT2) ? "Full Duplex" : "Half Duplex");
+ if (port_status & BIT4)
+ printf (", Speed 1 Gbps");
+ else
+ printf (", %s",
+ (port_status & BIT5) ? "Speed 100 Mbps" :
+ "Speed 10 Mbps");
+ printf ("\n");
+ }
+}
+
+/**********************************************************************
+ * u-boot entry functions for mv64360_eth
+ *
+ **********************************************************************/
+int db64360_eth_probe (struct eth_device *dev)
+{
+ return ((int) db64360_eth_start (dev));
+}
+
+int db64360_eth_poll (struct eth_device *dev)
+{
+ return mv64360_eth_receive (dev);
+}
+
+int db64360_eth_transmit (struct eth_device *dev, volatile void *packet,
+ int length)
+{
+ mv64360_eth_xmit (dev, packet, length);
+ return 0;
+}
+
+void db64360_eth_disable (struct eth_device *dev)
+{
+ mv64360_eth_stop (dev);
+}
+
+
+void mv6436x_eth_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ int devnum, x, temp;
+ char *s, *e, buf[64];
+
+ for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
+ dev = calloc (sizeof (*dev), 1);
+ if (!dev) {
+ printf ("%s: mv_enet%d allocation failure, %s\n",
+ __FUNCTION__, devnum, "eth_device structure");
+ return;
+ }
+
+ /* must be less than NAMESIZE (16) */
+ sprintf (dev->name, "mv_enet%d", devnum);
+
+#ifdef DEBUG
+ printf ("Initializing %s\n", dev->name);
+#endif
+
+ /* Extract the MAC address from the environment */
+ switch (devnum) {
+ case 0:
+ s = "ethaddr";
+ break;
+
+ case 1:
+ s = "eth1addr";
+ break;
+
+ case 2:
+ s = "eth2addr";
+ break;
+
+ default: /* this should never happen */
+ printf ("%s: Invalid device number %d\n",
+ __FUNCTION__, devnum);
+ return;
+ }
+
+ temp = getenv_r (s, buf, sizeof (buf));
+ s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+ printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+ for (x = 0; x < 6; ++x) {
+ dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ /* ronen - set the MAC addr in the HW */
+ eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
+
+ dev->init = (void *) db64360_eth_probe;
+ dev->halt = (void *) ethernet_phy_reset;
+ dev->send = (void *) db64360_eth_transmit;
+ dev->recv = (void *) db64360_eth_poll;
+
+ dev->priv = (void *) ethernet_private =
+ calloc (sizeof (*ethernet_private), 1);
+ if (!ethernet_private) {
+ printf ("%s: %s allocation failure, %s\n",
+ __FUNCTION__, dev->name,
+ "Private Device Structure");
+ free (dev);
+ return;
+ }
+ /* start with an zeroed ETH_PORT_INFO */
+ memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
+ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+ /* set pointer to memory for stats data structure etc... */
+ ethernet_private->port_private = (void *) port_private =
+ calloc (sizeof (*ethernet_private), 1);
+ if (!port_private) {
+ printf ("%s: %s allocation failure, %s\n",
+ __FUNCTION__, dev->name,
+ "Port Private Device Structure");
+
+ free (ethernet_private);
+ free (dev);
+ return;
+ }
+
+ port_private->stats =
+ calloc (sizeof (struct net_device_stats), 1);
+ if (!port_private->stats) {
+ printf ("%s: %s allocation failure, %s\n",
+ __FUNCTION__, dev->name,
+ "Net stat Structure");
+
+ free (port_private);
+ free (ethernet_private);
+ free (dev);
+ return;
+ }
+ memset (ethernet_private->port_private, 0,
+ sizeof (struct mv64360_eth_priv));
+ switch (devnum) {
+ case 0:
+ ethernet_private->port_num = ETH_0;
+ break;
+ case 1:
+ ethernet_private->port_num = ETH_1;
+ break;
+ case 2:
+ ethernet_private->port_num = ETH_2;
+ break;
+ default:
+ printf ("Invalid device number %d\n", devnum);
+ break;
+ };
+
+ port_private->port_num = devnum;
+ /*
+ * Read MIB counter on the GT in order to reset them,
+ * then zero all the stats fields in memory
+ */
+ mv64360_eth_update_stat (dev);
+ memset (port_private->stats, 0,
+ sizeof (struct net_device_stats));
+ /* Extract the MAC address from the environment */
+ switch (devnum) {
+ case 0:
+ s = "ethaddr";
+ break;
+
+ case 1:
+ s = "eth1addr";
+ break;
+
+ case 2:
+ s = "eth2addr";
+ break;
+
+ default: /* this should never happen */
+ printf ("%s: Invalid device number %d\n",
+ __FUNCTION__, devnum);
+ return;
+ }
+
+ temp = getenv_r (s, buf, sizeof (buf));
+ s = (temp > 0) ? buf : NULL;
+
+#ifdef DEBUG
+ printf ("Setting MAC %d to %s\n", devnum, s);
+#endif
+ for (x = 0; x < 6; ++x) {
+ dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ DP (printf ("Allocating descriptor and buffer rings\n"));
+
+ ethernet_private->p_rx_desc_area_base[0] =
+ (ETH_RX_DESC *) memalign (16,
+ RX_DESC_ALIGNED_SIZE *
+ MV64360_RX_QUEUE_SIZE + 1);
+ ethernet_private->p_tx_desc_area_base[0] =
+ (ETH_TX_DESC *) memalign (16,
+ TX_DESC_ALIGNED_SIZE *
+ MV64360_TX_QUEUE_SIZE + 1);
+
+ ethernet_private->p_rx_buffer_base[0] =
+ (char *) memalign (16,
+ MV64360_RX_QUEUE_SIZE *
+ MV64360_TX_BUFFER_SIZE + 1);
+ ethernet_private->p_tx_buffer_base[0] =
+ (char *) memalign (16,
+ MV64360_RX_QUEUE_SIZE *
+ MV64360_TX_BUFFER_SIZE + 1);
+
+#ifdef DEBUG_MV_ETH
+ /* DEBUG OUTPUT prints adresses of globals */
+ print_globals (dev);
+#endif
+ eth_register (dev);
+
+ }
+ DP (printf ("%s: exit\n", __FUNCTION__));
+
+}
+
+/**********************************************************************
+ * mv64360_eth_open
+ *
+ * This function is called when openning the network device. The function
+ * should initialize all the hardware, initialize cyclic Rx/Tx
+ * descriptors chain and buffers and allocate an IRQ to the network
+ * device.
+ *
+ * Input : a pointer to the network device structure
+ * / / ronen - changed the output to match net/eth.c needs
+ * Output : nonzero of success , zero if fails.
+ * under construction
+ **********************************************************************/
+
+int mv64360_eth_open (struct eth_device *dev)
+{
+ return (mv64360_eth_real_open (dev));
+}
+
+/* Helper function for mv64360_eth_open */
+static int mv64360_eth_real_open (struct eth_device *dev)
+{
+
+ unsigned int queue;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+ u32 port_status, phy_reg_data;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ /* ronen - when we update the MAC env params we only update dev->enetaddr
+ see ./net/eth.c eth_set_enetaddr() */
+ memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
+
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Stop RX Queues */
+ MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+ 0x0000ff00);
+
+ /* Clear the ethernet port interrupts */
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+
+ /* Unmask RX buffer and TX end interrupt */
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num),
+ INT_CAUSE_UNMASK_ALL);
+
+ /* Unmask phy and link status changes interrupts */
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
+ INT_CAUSE_UNMASK_ALL_EXT);
+
+ /* Set phy address of the port */
+ ethernet_private->port_phy_addr = 0x8 + port_num;
+
+ /* Activate the DMA channels etc */
+ eth_port_init (ethernet_private);
+
+
+ /* "Allocate" setup TX rings */
+
+ for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
+ unsigned int size;
+
+ port_private->tx_ring_size[queue] = MV64360_TX_QUEUE_SIZE;
+ size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */
+ ethernet_private->tx_desc_area_size[queue] = size;
+
+ /* first clear desc area completely */
+ memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
+ 0, ethernet_private->tx_desc_area_size[queue]);
+
+ /* initialize tx desc ring with low level driver */
+ if (ether_init_tx_desc_ring
+ (ethernet_private, ETH_Q0,
+ port_private->tx_ring_size[queue],
+ MV64360_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+ (unsigned int) ethernet_private->
+ p_tx_desc_area_base[queue],
+ (unsigned int) ethernet_private->
+ p_tx_buffer_base[queue]) == false)
+ printf ("### Error initializing TX Ring\n");
+ }
+
+ /* "Allocate" setup RX rings */
+ for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
+ unsigned int size;
+
+ /* Meantime RX Ring are fixed - but must be configurable by user */
+ port_private->rx_ring_size[queue] = MV64360_RX_QUEUE_SIZE;
+ size = (port_private->rx_ring_size[queue] *
+ RX_DESC_ALIGNED_SIZE);
+ ethernet_private->rx_desc_area_size[queue] = size;
+
+ /* first clear desc area completely */
+ memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
+ 0, ethernet_private->rx_desc_area_size[queue]);
+ if ((ether_init_rx_desc_ring
+ (ethernet_private, ETH_Q0,
+ port_private->rx_ring_size[queue],
+ MV64360_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
+ (unsigned int) ethernet_private->
+ p_rx_desc_area_base[queue],
+ (unsigned int) ethernet_private->
+ p_rx_buffer_base[queue])) == false)
+ printf ("### Error initializing RX Ring\n");
+ }
+
+ eth_port_start (ethernet_private);
+
+ /* Set maximum receive buffer to 9700 bytes */
+ MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num),
+ (0x5 << 17) |
+ (MV_REG_READ
+ (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num))
+ & 0xfff1ffff));
+
+ /*
+ * Set ethernet MTU for leaky bucket mechanism to 0 - this will
+ * disable the leaky bucket mechanism .
+ */
+
+ MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
+ port_status = MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
+
+ /* Check Link status on phy */
+ eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+ if (!(phy_reg_data & 0x20)) {
+ /* Reset PHY */
+ if ((ethernet_phy_reset (port_num)) != true) {
+ printf ("$$ Warnning: No link on port %d \n",
+ port_num);
+ return 0;
+ } else {
+ eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
+ if (!(phy_reg_data & 0x20)) {
+ printf ("### Error: Phy is not active\n");
+ return 0;
+ }
+ }
+ } else {
+ mv64360_eth_print_phy_status (dev);
+ }
+ port_private->eth_running = MAGIC_ETH_RUNNING;
+ return 1;
+}
+
+
+static int mv64360_eth_free_tx_rings (struct eth_device *dev)
+{
+ unsigned int queue;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+ volatile ETH_TX_DESC *p_tx_curr_desc;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Stop Tx Queues */
+ MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
+ 0x0000ff00);
+
+ /* Free TX rings */
+ DP (printf ("Clearing previously allocated TX queues... "));
+ for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
+ /* Free on TX rings */
+ for (p_tx_curr_desc =
+ ethernet_private->p_tx_desc_area_base[queue];
+ ((unsigned int) p_tx_curr_desc <= (unsigned int)
+ ethernet_private->p_tx_desc_area_base[queue] +
+ ethernet_private->tx_desc_area_size[queue]);
+ p_tx_curr_desc =
+ (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
+ TX_DESC_ALIGNED_SIZE)) {
+ /* this is inside for loop */
+ if (p_tx_curr_desc->return_info != 0) {
+ p_tx_curr_desc->return_info = 0;
+ DP (printf ("freed\n"));
+ }
+ }
+ DP (printf ("Done\n"));
+ }
+ return 0;
+}
+
+static int mv64360_eth_free_rx_rings (struct eth_device *dev)
+{
+ unsigned int queue;
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+ volatile ETH_RX_DESC *p_rx_curr_desc;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+
+ /* Stop RX Queues */
+ MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
+ 0x0000ff00);
+
+ /* Free RX rings */
+ DP (printf ("Clearing previously allocated RX queues... "));
+ for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
+ /* Free preallocated skb's on RX rings */
+ for (p_rx_curr_desc =
+ ethernet_private->p_rx_desc_area_base[queue];
+ (((unsigned int) p_rx_curr_desc <
+ ((unsigned int) ethernet_private->
+ p_rx_desc_area_base[queue] +
+ ethernet_private->rx_desc_area_size[queue])));
+ p_rx_curr_desc =
+ (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
+ RX_DESC_ALIGNED_SIZE)) {
+ if (p_rx_curr_desc->return_info != 0) {
+ p_rx_curr_desc->return_info = 0;
+ DP (printf ("freed\n"));
+ }
+ }
+ DP (printf ("Done\n"));
+ }
+ return 0;
+}
+
+/**********************************************************************
+ * mv64360_eth_stop
+ *
+ * This function is used when closing the network device.
+ * It updates the hardware,
+ * release all memory that holds buffers and descriptors and release the IRQ.
+ * Input : a pointer to the device structure
+ * Output : zero if success , nonzero if fails
+ *********************************************************************/
+
+int mv64360_eth_stop (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ /* Disable all gigE address decoder */
+ MV_REG_WRITE (MV64360_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
+ DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
+ mv64360_eth_real_stop (dev);
+
+ return 0;
+};
+
+/* Helper function for mv64360_eth_stop */
+
+static int mv64360_eth_real_stop (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+
+ mv64360_eth_free_tx_rings (dev);
+ mv64360_eth_free_rx_rings (dev);
+
+ eth_port_reset (ethernet_private->port_num);
+ /* Disable ethernet port interrupts */
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
+ /* Mask RX buffer and TX end interrupt */
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num), 0);
+ /* Mask phy and link status changes interrupts */
+ MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
+ MV_RESET_REG_BITS (MV64360_CPU_INTERRUPT0_MASK_HIGH,
+ BIT0 << port_num);
+ /* Print Network statistics */
+#ifndef UPDATE_STATS_BY_SOFTWARE
+ /*
+ * Print statistics (only if ethernet is running),
+ * then zero all the stats fields in memory
+ */
+ if (port_private->eth_running == MAGIC_ETH_RUNNING) {
+ port_private->eth_running = 0;
+ mv64360_eth_print_stat (dev);
+ }
+ memset (port_private->stats, 0, sizeof (struct net_device_stats));
+#endif
+ DP (printf ("\nEthernet stopped ... \n"));
+ return 0;
+}
+
+
+/**********************************************************************
+ * mv64360_eth_start_xmit
+ *
+ * This function is queues a packet in the Tx descriptor for
+ * required port.
+ *
+ * Input : skb - a pointer to socket buffer
+ * dev - a pointer to the required port
+ *
+ * Output : zero upon success
+ **********************************************************************/
+
+int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
+ int dataSize)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+ PKT_INFO pkt_info;
+ ETH_FUNC_RET_STATUS status;
+ struct net_device_stats *stats;
+ ETH_FUNC_RET_STATUS release_result;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ stats = port_private->stats;
+
+ /* Update packet info data structure */
+ pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
+ pkt_info.byte_cnt = dataSize;
+ pkt_info.buf_ptr = (unsigned int) dataPtr;
+
+ status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
+ if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
+ printf ("Error on transmitting packet ..");
+ if (status == ETH_QUEUE_FULL)
+ printf ("ETH Queue is full. \n");
+ if (status == ETH_QUEUE_LAST_RESOURCE)
+ printf ("ETH Queue: using last available resource. \n");
+ goto error;
+ }
+
+ /* Update statistics and start of transmittion time */
+ stats->tx_bytes += dataSize;
+ stats->tx_packets++;
+
+ /* Check if packet(s) is(are) transmitted correctly (release everything) */
+ do {
+ release_result =
+ eth_tx_return_desc (ethernet_private, ETH_Q0,
+ &pkt_info);
+ switch (release_result) {
+ case ETH_OK:
+ DP (printf ("descriptor released\n"));
+ if (pkt_info.cmd_sts & BIT0) {
+ printf ("Error in TX\n");
+ stats->tx_errors++;
+
+ }
+ break;
+ case ETH_RETRY:
+ DP (printf ("transmission still in process\n"));
+ break;
+
+ case ETH_ERROR:
+ printf ("routine can not access Tx desc ring\n");
+ break;
+
+ case ETH_END_OF_JOB:
+ DP (printf ("the routine has nothing to release\n"));
+ break;
+ default: /* should not happen */
+ break;
+ }
+ } while (release_result == ETH_OK);
+
+
+ return 0; /* success */
+ error:
+ return 1; /* Failed - higher layers will free the skb */
+}
+
+/**********************************************************************
+ * mv64360_eth_receive
+ *
+ * This function is forward packets that are received from the port's
+ * queues toward kernel core or FastRoute them to another interface.
+ *
+ * Input : dev - a pointer to the required interface
+ * max - maximum number to receive (0 means unlimted)
+ *
+ * Output : number of served packets
+ **********************************************************************/
+
+int mv64360_eth_receive (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+ PKT_INFO pkt_info;
+ struct net_device_stats *stats;
+
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+ stats = port_private->stats;
+
+ while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
+ ETH_OK)) {
+
+#ifdef DEBUG_MV_ETH
+ if (pkt_info.byte_cnt != 0) {
+ printf ("%s: Received %d byte Packet @ 0x%x\n",
+ __FUNCTION__, pkt_info.byte_cnt,
+ pkt_info.buf_ptr);
+ }
+#endif
+ /* Update statistics. Note byte count includes 4 byte CRC count */
+ stats->rx_packets++;
+ stats->rx_bytes += pkt_info.byte_cnt;
+
+ /*
+ * In case received a packet without first / last bits on OR the error
+ * summary bit is on, the packets needs to be dropeed.
+ */
+ if (((pkt_info.
+ cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
+ (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
+ || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
+ stats->rx_dropped++;
+
+ printf ("Received packet spread on multiple descriptors\n");
+
+ /* Is this caused by an error ? */
+ if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
+ stats->rx_errors++;
+ }
+
+ /* free these descriptors again without forwarding them to the higher layers */
+ pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
+ pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
+
+ if (eth_rx_return_buff
+ (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+ printf ("Error while returning the RX Desc to Ring\n");
+ } else {
+ DP (printf ("RX Desc returned to Ring\n"));
+ }
+ /* /free these descriptors again */
+ } else {
+
+/* !!! call higher layer processing */
+#ifdef DEBUG_MV_ETH
+ printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
+#endif
+ /* let the upper layer handle the packet */
+ NetReceive ((uchar *) pkt_info.buf_ptr,
+ (int) pkt_info.byte_cnt);
+
+/* **************************************************************** */
+/* free descriptor */
+ pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
+ pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
+ DP (printf
+ ("RX: pkt_info.buf_ptr = %x\n",
+ pkt_info.buf_ptr));
+ if (eth_rx_return_buff
+ (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
+ printf ("Error while returning the RX Desc to Ring\n");
+ } else {
+ DP (printf ("RX Desc returned to Ring\n"));
+ }
+
+/* **************************************************************** */
+
+ }
+ }
+ mv64360_eth_get_stats (dev); /* update statistics */
+ return 1;
+}
+
+/**********************************************************************
+ * mv64360_eth_get_stats
+ *
+ * Returns a pointer to the interface statistics.
+ *
+ * Input : dev - a pointer to the required interface
+ *
+ * Output : a pointer to the interface's statistics
+ **********************************************************************/
+
+static struct net_device_stats *mv64360_eth_get_stats (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+
+ mv64360_eth_update_stat (dev);
+
+ return port_private->stats;
+}
+
+
+/**********************************************************************
+ * mv64360_eth_update_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64360_eth_update_stat (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ struct net_device_stats *stats;
+ unsigned int port_num;
+ volatile unsigned int dummy;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+ stats = port_private->stats;
+
+ /* These are false updates */
+ stats->rx_packets += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_FRAMES_RECEIVED);
+ stats->tx_packets += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_FRAMES_SENT);
+ stats->rx_bytes += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
+ /*
+ * Ideally this should be as follows -
+ *
+ * stats->rx_bytes += stats->rx_bytes +
+ * ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
+ * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
+ *
+ * But the unsigned long in PowerPC and MIPS are 32bit. So the next read
+ * is just a dummy read for proper work of the GigE port
+ */
+ dummy = eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
+ stats->tx_bytes += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_SENT_LOW);
+ dummy = eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_GOOD_OCTETS_SENT_HIGH);
+ stats->rx_errors += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_MAC_RECEIVE_ERROR);
+
+ /* Rx dropped is for received packet with CRC error */
+ stats->rx_dropped +=
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_BAD_CRC_EVENT);
+ stats->multicast += (unsigned long)
+ eth_read_mib_counter (ethernet_private->port_num,
+ ETH_MIB_MULTICAST_FRAMES_RECEIVED);
+ stats->collisions +=
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_COLLISION) +
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_LATE_COLLISION);
+ /* detailed rx errors */
+ stats->rx_length_errors +=
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_UNDERSIZE_RECEIVED)
+ +
+ (unsigned long) eth_read_mib_counter (ethernet_private->
+ port_num,
+ ETH_MIB_OVERSIZE_RECEIVED);
+ /* detailed tx errors */
+}
+
+#ifndef UPDATE_STATS_BY_SOFTWARE
+/**********************************************************************
+ * mv64360_eth_print_stat
+ *
+ * Update the statistics structure in the private data structure
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ **********************************************************************/
+
+static void mv64360_eth_print_stat (struct eth_device *dev)
+{
+ ETH_PORT_INFO *ethernet_private;
+ struct mv64360_eth_priv *port_private;
+ struct net_device_stats *stats;
+ unsigned int port_num;
+
+ ethernet_private = (ETH_PORT_INFO *) dev->priv;
+ port_private =
+ (struct mv64360_eth_priv *) ethernet_private->port_private;
+ port_num = port_private->port_num;
+ stats = port_private->stats;
+
+ /* These are false updates */
+ printf ("\n### Network statistics: ###\n");
+ printf ("--------------------------\n");
+ printf (" Packets received: %ld\n", stats->rx_packets);
+ printf (" Packets send: %ld\n", stats->tx_packets);
+ printf (" Received bytes: %ld\n", stats->rx_bytes);
+ printf (" Send bytes: %ld\n", stats->tx_bytes);
+ if (stats->rx_errors != 0)
+ printf (" Rx Errors: %ld\n",
+ stats->rx_errors);
+ if (stats->rx_dropped != 0)
+ printf (" Rx dropped (CRC Errors): %ld\n",
+ stats->rx_dropped);
+ if (stats->multicast != 0)
+ printf (" Rx mulicast frames: %ld\n",
+ stats->multicast);
+ if (stats->collisions != 0)
+ printf (" No. of collisions: %ld\n",
+ stats->collisions);
+ if (stats->rx_length_errors != 0)
+ printf (" Rx length errors: %ld\n",
+ stats->rx_length_errors);
+}
+#endif
+
+/**************************************************************************
+ *network_start - Network Kick Off Routine UBoot
+ *Inputs :
+ *Outputs :
+ **************************************************************************/
+
+bool db64360_eth_start (struct eth_device *dev)
+{
+ return (mv64360_eth_open (dev)); /* calls real open */
+}
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The second part is the low level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+/*
+ * based on Linux code
+ * arch/ppc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/********************************************************************************
+ * Marvell's Gigabit Ethernet controller low level driver
+ *
+ * DESCRIPTION:
+ * This file introduce low level API to Marvell's Gigabit Ethernet
+ * controller. This Gigabit Ethernet Controller driver API controls
+ * 1) Operations (i.e. port init, start, reset etc').
+ * 2) Data flow (i.e. port send, receive etc').
+ * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
+ * struct.
+ * This struct includes user configuration information as well as
+ * driver internal data needed for its operations.
+ *
+ * Supported Features:
+ * - This low level driver is OS independent. Allocating memory for
+ * the descriptor rings and buffers are not within the scope of
+ * this driver.
+ * - The user is free from Rx/Tx queue managing.
+ * - This low level driver introduce functionality API that enable
+ * the to operate Marvell's Gigabit Ethernet Controller in a
+ * convenient way.
+ * - Simple Gigabit Ethernet port operation API.
+ * - Simple Gigabit Ethernet port data flow API.
+ * - Data flow and operation API support per queue functionality.
+ * - Support cached descriptors for better performance.
+ * - Enable access to all four DRAM banks and internal SRAM memory
+ * spaces.
+ * - PHY access and control API.
+ * - Port control register configuration API.
+ * - Full control over Unicast and Multicast MAC configurations.
+ *
+ * Operation flow:
+ *
+ * Initialization phase
+ * This phase complete the initialization of the ETH_PORT_INFO
+ * struct.
+ * User information regarding port configuration has to be set
+ * prior to calling the port initialization routine. For example,
+ * the user has to assign the port_phy_addr field which is board
+ * depended parameter.
+ * In this phase any port Tx/Rx activity is halted, MIB counters
+ * are cleared, PHY address is set according to user parameter and
+ * access to DRAM and internal SRAM memory spaces.
+ *
+ * Driver ring initialization
+ * Allocating memory for the descriptor rings and buffers is not
+ * within the scope of this driver. Thus, the user is required to
+ * allocate memory for the descriptors ring and buffers. Those
+ * memory parameters are used by the Rx and Tx ring initialization
+ * routines in order to curve the descriptor linked list in a form
+ * of a ring.
+ * Note: Pay special attention to alignment issues when using
+ * cached descriptors/buffers. In this phase the driver store
+ * information in the ETH_PORT_INFO struct regarding each queue
+ * ring.
+ *
+ * Driver start
+ * This phase prepares the Ethernet port for Rx and Tx activity.
+ * It uses the information stored in the ETH_PORT_INFO struct to
+ * initialize the various port registers.
+ *
+ * Data flow:
+ * All packet references to/from the driver are done using PKT_INFO
+ * struct.
+ * This struct is a unified struct used with Rx and Tx operations.
+ * This way the user is not required to be familiar with neither
+ * Tx nor Rx descriptors structures.
+ * The driver's descriptors rings are management by indexes.
+ * Those indexes controls the ring resources and used to indicate
+ * a SW resource error:
+ * 'current'
+ * This index points to the current available resource for use. For
+ * example in Rx process this index will point to the descriptor
+ * that will be passed to the user upon calling the receive routine.
+ * In Tx process, this index will point to the descriptor
+ * that will be assigned with the user packet info and transmitted.
+ * 'used'
+ * This index points to the descriptor that need to restore its
+ * resources. For example in Rx process, using the Rx buffer return
+ * API will attach the buffer returned in packet info to the
+ * descriptor pointed by 'used'. In Tx process, using the Tx
+ * descriptor return will merely return the user packet info with
+ * the command status of the transmitted buffer pointed by the
+ * 'used' index. Nevertheless, it is essential to use this routine
+ * to update the 'used' index.
+ * 'first'
+ * This index supports Tx Scatter-Gather. It points to the first
+ * descriptor of a packet assembled of multiple buffers. For example
+ * when in middle of Such packet we have a Tx resource error the
+ * 'curr' index get the value of 'first' to indicate that the ring
+ * returned to its state before trying to transmit this packet.
+ *
+ * Receive operation:
+ * The eth_port_receive API set the packet information struct,
+ * passed by the caller, with received information from the
+ * 'current' SDMA descriptor.
+ * It is the user responsibility to return this resource back
+ * to the Rx descriptor ring to enable the reuse of this source.
+ * Return Rx resource is done using the eth_rx_return_buff API.
+ *
+ * Transmit operation:
+ * The eth_port_send API supports Scatter-Gather which enables to
+ * send a packet spanned over multiple buffers. This means that
+ * for each packet info structure given by the user and put into
+ * the Tx descriptors ring, will be transmitted only if the 'LAST'
+ * bit will be set in the packet info command status field. This
+ * API also consider restriction regarding buffer alignments and
+ * sizes.
+ * The user must return a Tx resource after ensuring the buffer
+ * has been transmitted to enable the Tx ring indexes to update.
+ *
+ * BOARD LAYOUT
+ * This device is on-board. No jumper diagram is necessary.
+ *
+ * EXTERNAL INTERFACE
+ *
+ * Prior to calling the initialization routine eth_port_init() the user
+ * must set the following fields under ETH_PORT_INFO struct:
+ * port_num User Ethernet port number.
+ * port_phy_addr User PHY address of Ethernet port.
+ * port_mac_addr[6] User defined port MAC address.
+ * port_config User port configuration value.
+ * port_config_extend User port config extend value.
+ * port_sdma_config User port SDMA config value.
+ * port_serial_control User port serial control value.
+ * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr.
+ * *port_private User scratch pad for user specific data structures.
+ *
+ * This driver introduce a set of default values:
+ * PORT_CONFIG_VALUE Default port configuration value
+ * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value
+ * PORT_SDMA_CONFIG_VALUE Default sdma control value
+ * PORT_SERIAL_CONTROL_VALUE Default port serial control value
+ *
+ * This driver data flow is done using the PKT_INFO struct which is
+ * a unified struct for Rx and Tx operations:
+ * byte_cnt Tx/Rx descriptor buffer byte count.
+ * l4i_chk CPU provided TCP Checksum. For Tx operation only.
+ * cmd_sts Tx/Rx descriptor command status.
+ * buf_ptr Tx/Rx descriptor buffer pointer.
+ * return_info Tx/Rx user resource return information.
+ *
+ *
+ * EXTERNAL SUPPORT REQUIREMENTS
+ *
+ * This driver requires the following external support:
+ *
+ * D_CACHE_FLUSH_LINE (address, address offset)
+ *
+ * This macro applies assembly code to flush and invalidate cache
+ * line.
+ * address - address base.
+ * address offset - address offset
+ *
+ *
+ * CPU_PIPE_FLUSH
+ *
+ * This macro applies assembly code to flush the CPU pipeline.
+ *
+ *******************************************************************************/
+/* includes */
+
+/* defines */
+/* SDMA command macros */
+#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
+
+#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
+ MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
+ (1 << (8 + tx_queue)))
+
+#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
+
+#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
+MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
+
+#define CURR_RFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
+
+#define CURR_RFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_RFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
+
+#define USED_RFD_SET(p_used_desc, queue)\
+(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
+
+
+#define CURR_TFD_GET(p_curr_desc, queue) \
+ ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
+
+#define CURR_TFD_SET(p_curr_desc, queue) \
+ (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
+
+#define USED_TFD_GET(p_used_desc, queue) \
+ ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
+
+#define USED_TFD_SET(p_used_desc, queue) \
+ (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
+
+#define FIRST_TFD_GET(p_first_desc, queue) \
+ ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
+
+#define FIRST_TFD_SET(p_first_desc, queue) \
+ (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
+
+
+/* Macros that save access to desc in order to find next desc pointer */
+#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
+
+#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
+
+#define LINK_UP_TIMEOUT 100000
+#define PHY_BUSY_TIMEOUT 10000000
+
+/* locals */
+
+/* PHY routines */
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
+static int ethernet_phy_get (ETH_PORT eth_port_num);
+
+/* Ethernet Port routines */
+static void eth_set_access_control (ETH_PORT eth_port_num,
+ ETH_WIN_PARAM * param);
+static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
+ ETH_QUEUE queue, int option);
+#if 0 /* FIXME */
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+ unsigned char mc_byte,
+ ETH_QUEUE queue, int option);
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+ unsigned char crc8,
+ ETH_QUEUE queue, int option);
+#endif
+
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+ int byte_count);
+
+void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
+
+
+typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
+u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
+{
+ u32 result = 0;
+ u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
+
+ if (enable & (1 << bank))
+ return 0;
+ if (bank == BANK0)
+ result = MV_REG_READ (MV64360_CS_0_BASE_ADDR);
+ if (bank == BANK1)
+ result = MV_REG_READ (MV64360_CS_1_BASE_ADDR);
+ if (bank == BANK2)
+ result = MV_REG_READ (MV64360_CS_2_BASE_ADDR);
+ if (bank == BANK3)
+ result = MV_REG_READ (MV64360_CS_3_BASE_ADDR);
+ result &= 0x0000ffff;
+ result = result << 16;
+ return result;
+}
+
+u32 mv_get_dram_bank_size (MEMORY_BANK bank)
+{
+ u32 result = 0;
+ u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
+
+ if (enable & (1 << bank))
+ return 0;
+ if (bank == BANK0)
+ result = MV_REG_READ (MV64360_CS_0_SIZE);
+ if (bank == BANK1)
+ result = MV_REG_READ (MV64360_CS_1_SIZE);
+ if (bank == BANK2)
+ result = MV_REG_READ (MV64360_CS_2_SIZE);
+ if (bank == BANK3)
+ result = MV_REG_READ (MV64360_CS_3_SIZE);
+ result += 1;
+ result &= 0x0000ffff;
+ result = result << 16;
+ return result;
+}
+
+u32 mv_get_internal_sram_base (void)
+{
+ u32 result;
+
+ result = MV_REG_READ (MV64360_INTEGRATED_SRAM_BASE_ADDR);
+ result &= 0x0000ffff;
+ result = result << 16;
+ return result;
+}
+
+/*******************************************************************************
+* eth_port_init - Initialize the Ethernet port driver
+*
+* DESCRIPTION:
+* This function prepares the ethernet port to start its activity:
+* 1) Completes the ethernet port driver struct initialization toward port
+* start routine.
+* 2) Resets the device to a quiescent state in case of warm reboot.
+* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
+* 4) Clean MAC tables. The reset status of those tables is unknown.
+* 5) Set PHY address.
+* Note: Call this routine prior to eth_port_start routine and after setting
+* user values in the user fields of Ethernet port control struct (i.e.
+* port_phy_addr).
+*
+* INPUT:
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+ int queue;
+ ETH_WIN_PARAM win_param;
+
+ p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
+ p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
+ p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
+ p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
+
+ p_eth_port_ctrl->port_rx_queue_command = 0;
+ p_eth_port_ctrl->port_tx_queue_command = 0;
+
+ /* Zero out SW structs */
+ for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+ CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+ USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
+ p_eth_port_ctrl->rx_resource_err[queue] = false;
+ }
+
+ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+ CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+ USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+ FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
+ p_eth_port_ctrl->tx_resource_err[queue] = false;
+ }
+
+ eth_port_reset (p_eth_port_ctrl->port_num);
+
+ /* Set access parameters for DRAM bank 0 */
+ win_param.win = ETH_WIN0; /* Use Ethernet window 0 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
+ win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for DRAM bank 1 */
+ win_param.win = ETH_WIN1; /* Use Ethernet window 1 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
+ win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for DRAM bank 2 */
+ win_param.win = ETH_WIN2; /* Use Ethernet window 2 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
+ win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for DRAM bank 3 */
+ win_param.win = ETH_WIN3; /* Use Ethernet window 3 */
+ win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
+ win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
+#endif
+ win_param.high_addr = 0;
+ /* Get bank base */
+ win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
+ win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ /* Set access parameters for Internal SRAM */
+ win_param.win = ETH_WIN4; /* Use Ethernet window 0 */
+ win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */
+ win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
+ win_param.high_addr = 0;
+ win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */
+ win_param.size = MV64360_INTERNAL_SRAM_SIZE; /* Get bank size */
+ win_param.enable = 1; /* Enable the access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
+
+ /* Set the access control for address window (EPAPR) READ & WRITE */
+ eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
+
+ eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
+
+ ethernet_phy_set (p_eth_port_ctrl->port_num,
+ p_eth_port_ctrl->port_phy_addr);
+
+ return;
+
+}
+
+/*******************************************************************************
+* eth_port_start - Start the Ethernet port activity.
+*
+* DESCRIPTION:
+* This routine prepares the Ethernet port for Rx and Tx activity:
+* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
+* has been initialized a descriptor's ring (using ether_init_tx_desc_ring
+* for Tx and ether_init_rx_desc_ring for Rx)
+* 2. Initialize and enable the Ethernet configuration port by writing to
+* the port's configuration and command registers.
+* 3. Initialize and enable the SDMA by writing to the SDMA's
+* configuration and command registers.
+* After completing these steps, the ethernet port SDMA can starts to
+* perform Rx and Tx activities.
+*
+* Note: Each Rx and Tx queue descriptor's list must be initialized prior
+* to calling this function (use ether_init_tx_desc_ring for Tx queues and
+* ether_init_rx_desc_ring for Rx queues).
+*
+* INPUT:
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+*
+* OUTPUT:
+* Ethernet port is ready to receive and transmit.
+*
+* RETURN:
+* false if the port PHY is not up.
+* true otherwise.
+*
+*******************************************************************************/
+static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
+{
+ int queue;
+ volatile ETH_TX_DESC *p_tx_curr_desc;
+ volatile ETH_RX_DESC *p_rx_curr_desc;
+ unsigned int phy_reg_data;
+ ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
+
+
+ /* Assignment of Tx CTRP of given queue */
+ for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
+ CURR_TFD_GET (p_tx_curr_desc, queue);
+ MV_REG_WRITE ((MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
+ (eth_port_num)
+ + (4 * queue)),
+ ((unsigned int) p_tx_curr_desc));
+
+ }
+
+ /* Assignment of Rx CRDP of given queue */
+ for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
+ CURR_RFD_GET (p_rx_curr_desc, queue);
+ MV_REG_WRITE ((MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
+ (eth_port_num)
+ + (4 * queue)),
+ ((unsigned int) p_rx_curr_desc));
+
+ if (p_rx_curr_desc != NULL)
+ /* Add the assigned Ethernet address to the port's address table */
+ eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
+ p_eth_port_ctrl->port_mac_addr,
+ queue);
+ }
+
+ /* Assign port configuration and command. */
+ MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
+ p_eth_port_ctrl->port_config);
+
+ MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+ p_eth_port_ctrl->port_config_extend);
+
+ MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+ p_eth_port_ctrl->port_serial_control);
+
+ MV_SET_REG_BITS (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+ ETH_SERIAL_PORT_ENABLE);
+
+ /* Assign port SDMA configuration */
+ MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
+ p_eth_port_ctrl->port_sdma_config);
+
+ MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
+ (eth_port_num), 0x3fffffff);
+ MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
+ (eth_port_num), 0x03fffcff);
+ /* Turn off the port/queue bandwidth limitation */
+ MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
+
+ /* Enable port Rx. */
+ MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
+ p_eth_port_ctrl->port_rx_queue_command);
+
+ /* Check if link is up */
+ eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+ if (!(phy_reg_data & 0x20))
+ return false;
+
+ return true;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr_set - This function Set the port Unicast address.
+*
+* DESCRIPTION:
+* This function Set the port Ethernet MAC address.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* char * p_addr Address to be set
+* ETH_QUEUE queue Rx queue number for this MAC address.
+*
+* OUTPUT:
+* Set MAC address low and high registers. also calls eth_port_uc_addr()
+* To set the unicast table with the proper information.
+*
+* RETURN:
+* N/A.
+*
+*******************************************************************************/
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+ unsigned char *p_addr, ETH_QUEUE queue)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+
+ mac_l = (p_addr[4] << 8) | (p_addr[5]);
+ mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
+ (p_addr[2] << 8) | (p_addr[3] << 0);
+
+ MV_REG_WRITE (MV64360_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
+ MV_REG_WRITE (MV64360_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
+
+ /* Accept frames of this address */
+ eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
+
+ return;
+}
+
+/*******************************************************************************
+* eth_port_uc_addr - This function Set the port unicast address table
+*
+* DESCRIPTION:
+* This function locates the proper entry in the Unicast table for the
+* specified MAC nibble and sets its properties according to function
+* parameters.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char uc_nibble Unicast MAC Address last nibble.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* This function add/removes MAC addresses from the port unicast address
+* table.
+*
+* RETURN:
+* true is output succeeded.
+* false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_uc_addr (ETH_PORT eth_port_num,
+ unsigned char uc_nibble,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int unicast_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the Unicast table entry */
+ uc_nibble = (0xf & uc_nibble);
+ tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */
+ reg_offset = uc_nibble % 4; /* Entry offset within the above register */
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /* Clear accepts frame bit at specified unicast DA table entry */
+ unicast_reg =
+ MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset));
+
+ unicast_reg &= (0x0E << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset), unicast_reg);
+ break;
+
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at unicast DA filter table entry */
+ unicast_reg =
+ MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset));
+
+ unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num)
+ + tbl_offset), unicast_reg);
+
+ break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+
+#if 0 /* FIXME */
+/*******************************************************************************
+* eth_port_mc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+* This API controls the MV device MAC multicast support.
+* The MV device supports multicast using two tables:
+* 1) Special Multicast Table for MAC addresses of the form
+* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+* Table entries in the DA-Filter table.
+* In this case, the function calls eth_port_smc_addr() routine to set the
+* Special Multicast Table.
+* 2) Other Multicast Table for multicast of another type. A CRC-8bit
+* is used as an index to the Other Multicast Table entries in the
+* DA-Filter table.
+* In this case, the function calculates the CRC-8bit value and calls
+* eth_port_omc_addr() routine to set the Other Multicast Table.
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char *p_addr Unicast MAC Address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* true is output succeeded.
+* false if add_address_table_entry( ) failed.
+*
+*******************************************************************************/
+static void eth_port_mc_addr (ETH_PORT eth_port_num,
+ unsigned char *p_addr,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+ unsigned char crc_result = 0;
+ int mac_array[48];
+ int crc[8];
+ int i;
+
+
+ if ((p_addr[0] == 0x01) &&
+ (p_addr[1] == 0x00) &&
+ (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00))
+
+ eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
+ else {
+ /* Calculate CRC-8 out of the given address */
+ mac_h = (p_addr[0] << 8) | (p_addr[1]);
+ mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
+ (p_addr[4] << 8) | (p_addr[5] << 0);
+
+ for (i = 0; i < 32; i++)
+ mac_array[i] = (mac_l >> i) & 0x1;
+ for (i = 32; i < 48; i++)
+ mac_array[i] = (mac_h >> (i - 32)) & 0x1;
+
+
+ crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
+ mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
+ mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
+ mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
+ mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
+ mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
+ mac_array[6] ^ mac_array[0];
+
+ crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+ mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
+ mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
+ mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
+ mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
+ mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
+ mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
+ mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
+ mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
+ mac_array[0];
+
+ crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
+ mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
+ mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
+ mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
+ mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
+ mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
+ mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
+ mac_array[2] ^ mac_array[1] ^ mac_array[0];
+
+ crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
+ mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
+ mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
+ mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
+ mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
+ mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
+ mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
+ mac_array[2] ^ mac_array[1];
+
+ crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
+ mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
+ mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
+ mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
+ mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
+ mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+ mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
+ mac_array[2];
+
+ crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
+ mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
+ mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
+ mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
+ mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
+ mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
+ mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
+ mac_array[3];
+
+ crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
+ mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
+ mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
+ mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
+ mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
+ mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
+ mac_array[6] ^ mac_array[5] ^ mac_array[4];
+
+ crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
+ mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
+ mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
+ mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
+ mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
+ mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
+ mac_array[6] ^ mac_array[5];
+
+ for (i = 0; i < 8; i++)
+ crc_result = crc_result | (crc[i] << i);
+
+ eth_port_omc_addr (eth_port_num, crc_result, queue, option);
+ }
+ return;
+}
+
+/*******************************************************************************
+* eth_port_smc_addr - Special Multicast address settings.
+*
+* DESCRIPTION:
+* This routine controls the MV device special MAC multicast support.
+* The Special Multicast Table for MAC addresses supports MAC of the form
+* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
+* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+* Table entries in the DA-Filter table.
+* This function set the Special Multicast Table appropriate entry
+* according to the argument given.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* true is output succeeded.
+* false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_smc_addr (ETH_PORT eth_port_num,
+ unsigned char mc_byte,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int smc_table_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the SMC table entry */
+ tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */
+ reg_offset = mc_byte % 4; /* Entry offset within the above register */
+ queue &= 0x7;
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /* Clear accepts frame bit at specified Special DA table entry */
+ smc_table_reg =
+ MV_REG_READ ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ smc_table_reg &= (0x0E << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+ break;
+
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at specified Special DA table entry */
+ smc_table_reg =
+ MV_REG_READ ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
+ break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+
+/*******************************************************************************
+* eth_port_omc_addr - Multicast address settings.
+*
+* DESCRIPTION:
+* This routine controls the MV device Other MAC multicast support.
+* The Other Multicast Table is used for multicast of another type.
+* A CRC-8bit is used as an index to the Other Multicast Table entries
+* in the DA-Filter table.
+* The function gets the CRC-8bit value from the calling routine and
+* set the Other Multicast Table appropriate entry according to the
+* CRC-8 argument given.
+*
+* INPUT:
+* ETH_PORT eth_port_num Port number.
+* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* true is output succeeded.
+* false if option parameter is invalid.
+*
+*******************************************************************************/
+static bool eth_port_omc_addr (ETH_PORT eth_port_num,
+ unsigned char crc8,
+ ETH_QUEUE queue, int option)
+{
+ unsigned int omc_table_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the OMC table entry */
+ tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */
+ reg_offset = crc8 % 4; /* Entry offset within the above register */
+ queue &= 0x7;
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /* Clear accepts frame bit at specified Other DA table entry */
+ omc_table_reg =
+ MV_REG_READ ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ omc_table_reg &= (0x0E << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+ break;
+
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at specified Other DA table entry */
+ omc_table_reg =
+ MV_REG_READ ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
+ omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
+
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
+ break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+#endif
+
+/*******************************************************************************
+* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
+*
+* DESCRIPTION:
+* Go through all the DA filter tables (Unicast, Special Multicast & Other
+* Multicast) and set each entry to 0.
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+* Multicast and Unicast packets are rejected.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
+{
+ int table_index;
+
+ /* Clear DA filter unicast table (Ex_dFUT) */
+ for (table_index = 0; table_index <= 0xC; table_index += 4)
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
+ (eth_port_num) + table_index), 0);
+
+ for (table_index = 0; table_index <= 0xFC; table_index += 4) {
+ /* Clear DA filter special multicast table (Ex_dFSMT) */
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+ /* Clear DA filter other multicast table (Ex_dFOMT) */
+ MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
+ }
+}
+
+/*******************************************************************************
+* eth_clear_mib_counters - Clear all MIB counters
+*
+* DESCRIPTION:
+* This function clears all MIB counters of a specific ethernet port.
+* A read from the MIB counter will reset the counter.
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+* After reading all MIB counters, the counters resets.
+*
+* RETURN:
+* MIB counter value.
+*
+*******************************************************************************/
+static void eth_clear_mib_counters (ETH_PORT eth_port_num)
+{
+ int i;
+ unsigned int dummy;
+
+ /* Perform dummy reads from MIB counters */
+ for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
+ i += 4)
+ dummy = MV_REG_READ ((MV64360_ETH_MIB_COUNTERS_BASE
+ (eth_port_num) + i));
+
+ return;
+}
+
+/*******************************************************************************
+* eth_read_mib_counter - Read a MIB counter
+*
+* DESCRIPTION:
+* This function reads a MIB counter of a specific ethernet port.
+* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
+* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
+* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
+* ETH_MIB_GOOD_OCTETS_SENT_HIGH
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros).
+*
+* OUTPUT:
+* After reading the MIB counter, the counter resets.
+*
+* RETURN:
+* MIB counter value.
+*
+*******************************************************************************/
+unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
+ unsigned int mib_offset)
+{
+ return (MV_REG_READ (MV64360_ETH_MIB_COUNTERS_BASE (eth_port_num)
+ + mib_offset));
+}
+
+/*******************************************************************************
+* ethernet_phy_set - Set the ethernet port PHY address.
+*
+* DESCRIPTION:
+* This routine set the ethernet port PHY address according to given
+* parameter.
+*
+* INPUT:
+* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+*
+* OUTPUT:
+* Set PHY Address Register with given PHY address parameter.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
+{
+ unsigned int reg_data;
+
+ reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
+
+ reg_data &= ~(0x1F << (5 * eth_port_num));
+ reg_data |= (phy_addr << (5 * eth_port_num));
+
+ MV_REG_WRITE (MV64360_ETH_PHY_ADDR_REG, reg_data);
+
+ return;
+}
+
+/*******************************************************************************
+ * ethernet_phy_get - Get the ethernet port PHY address.
+ *
+ * DESCRIPTION:
+ * This routine returns the given ethernet port PHY address.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * PHY address.
+ *
+ *******************************************************************************/
+static int ethernet_phy_get (ETH_PORT eth_port_num)
+{
+ unsigned int reg_data;
+
+ reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
+
+ return ((reg_data >> (5 * eth_port_num)) & 0x1f);
+}
+
+/*******************************************************************************
+ * ethernet_phy_reset - Reset Ethernet port PHY.
+ *
+ * DESCRIPTION:
+ * This routine utilize the SMI interface to reset the ethernet port PHY.
+ * The routine waits until the link is up again or link up is timeout.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * The ethernet port PHY renew its link.
+ *
+ * RETURN:
+ * None.
+ *
+*******************************************************************************/
+static bool ethernet_phy_reset (ETH_PORT eth_port_num)
+{
+ unsigned int time_out = 50;
+ unsigned int phy_reg_data;
+
+ /* Reset the PHY */
+ eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
+ phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
+ eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
+
+ /* Poll on the PHY LINK */
+ do {
+ eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
+
+ if (time_out-- == 0)
+ return false;
+ }
+ while (!(phy_reg_data & 0x20));
+
+ return true;
+}
+
+/*******************************************************************************
+ * eth_port_reset - Reset Ethernet port
+ *
+ * DESCRIPTION:
+ * This routine resets the chip by aborting any SDMA engine activity and
+ * clearing the MIB counters. The Receiver and the Transmit unit are in
+ * idle state after this command is performed and the port is disabled.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * Channel activity is halted.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void eth_port_reset (ETH_PORT eth_port_num)
+{
+ unsigned int reg_data;
+
+ /* Stop Tx port activity. Check port Tx activity. */
+ reg_data =
+ MV_REG_READ (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
+ (eth_port_num));
+
+ if (reg_data & 0xFF) {
+ /* Issue stop command for active channels only */
+ MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
+ (eth_port_num), (reg_data << 8));
+
+ /* Wait for all Tx activity to terminate. */
+ do {
+ /* Check port cause register that all Tx queues are stopped */
+ reg_data =
+ MV_REG_READ
+ (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
+ (eth_port_num));
+ }
+ while (reg_data & 0xFF);
+ }
+
+ /* Stop Rx port activity. Check port Rx activity. */
+ reg_data =
+ MV_REG_READ (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
+ (eth_port_num));
+
+ if (reg_data & 0xFF) {
+ /* Issue stop command for active channels only */
+ MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
+ (eth_port_num), (reg_data << 8));
+
+ /* Wait for all Rx activity to terminate. */
+ do {
+ /* Check port cause register that all Rx queues are stopped */
+ reg_data =
+ MV_REG_READ
+ (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
+ (eth_port_num));
+ }
+ while (reg_data & 0xFF);
+ }
+
+
+ /* Clear all MIB counters */
+ eth_clear_mib_counters (eth_port_num);
+
+ /* Reset the Enable bit in the Configuration Register */
+ reg_data =
+ MV_REG_READ (MV64360_ETH_PORT_SERIAL_CONTROL_REG
+ (eth_port_num));
+ reg_data &= ~ETH_SERIAL_PORT_ENABLE;
+ MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
+ reg_data);
+
+ return;
+}
+
+#if 0 /* Not needed here */
+/*******************************************************************************
+ * ethernet_set_config_reg - Set specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ * This function sets specified bits in the given ethernet
+ * configuration register.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int value 32 bit value.
+ *
+ * OUTPUT:
+ * The set bits in the value parameter are set in the configuration
+ * register.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void ethernet_set_config_reg (ETH_PORT eth_port_num,
+ unsigned int value)
+{
+ unsigned int eth_config_reg;
+
+ eth_config_reg =
+ MV_REG_READ (MV64360_ETH_PORT_CONFIG_REG (eth_port_num));
+ eth_config_reg |= value;
+ MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
+ eth_config_reg);
+
+ return;
+}
+#endif
+
+#if 0 /* FIXME */
+/*******************************************************************************
+ * ethernet_reset_config_reg - Reset specified bits in configuration register.
+ *
+ * DESCRIPTION:
+ * This function resets specified bits in the given Ethernet
+ * configuration register.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int value 32 bit value.
+ *
+ * OUTPUT:
+ * The set bits in the value parameter are reset in the configuration
+ * register.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
+ unsigned int value)
+{
+ unsigned int eth_config_reg;
+
+ eth_config_reg = MV_REG_READ (MV64360_ETH_PORT_CONFIG_EXTEND_REG
+ (eth_port_num));
+ eth_config_reg &= ~value;
+ MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
+ eth_config_reg);
+
+ return;
+}
+#endif
+
+#if 0 /* Not needed here */
+/*******************************************************************************
+ * ethernet_get_config_reg - Get the port configuration register
+ *
+ * DESCRIPTION:
+ * This function returns the configuration register value of the given
+ * ethernet port.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * Port configuration register value.
+ *
+ *******************************************************************************/
+static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
+{
+ unsigned int eth_config_reg;
+
+ eth_config_reg = MV_REG_READ (MV64360_ETH_PORT_CONFIG_EXTEND_REG
+ (eth_port_num));
+ return eth_config_reg;
+}
+
+#endif
+
+/*******************************************************************************
+ * eth_port_read_smi_reg - Read PHY registers
+ *
+ * DESCRIPTION:
+ * This routine utilize the SMI interface to interact with the PHY in
+ * order to perform PHY register read.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int phy_reg PHY register address offset.
+ * unsigned int *value Register value buffer.
+ *
+ * OUTPUT:
+ * Write the value of a specified PHY register into given buffer.
+ *
+ * RETURN:
+ * false if the PHY is busy or read data is not in valid state.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
+ unsigned int phy_reg, unsigned int *value)
+{
+ unsigned int reg_value;
+ unsigned int time_out = PHY_BUSY_TIMEOUT;
+ int phy_addr;
+
+ phy_addr = ethernet_phy_get (eth_port_num);
+/* printf(" Phy-Port %d has addess %d \n",eth_port_num, phy_addr );*/
+
+ /* first check that it is not busy */
+ do {
+ reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while (reg_value & ETH_SMI_BUSY);
+
+ /* not busy */
+
+ MV_REG_WRITE (MV64360_ETH_SMI_REG,
+ (phy_addr << 16) | (phy_reg << 21) |
+ ETH_SMI_OPCODE_READ);
+
+ time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */
+
+ do {
+ reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
+
+ /* Wait for the data to update in the SMI register */
+#define PHY_UPDATE_TIMEOUT 10000
+ for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
+
+ reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+
+ *value = reg_value & 0xffff;
+
+ return true;
+}
+
+/*******************************************************************************
+ * eth_port_write_smi_reg - Write to PHY registers
+ *
+ * DESCRIPTION:
+ * This routine utilize the SMI interface to interact with the PHY in
+ * order to perform writes to PHY registers.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * unsigned int phy_reg PHY register address offset.
+ * unsigned int value Register value.
+ *
+ * OUTPUT:
+ * Write the given value to the specified PHY register.
+ *
+ * RETURN:
+ * false if the PHY is busy.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
+ unsigned int phy_reg, unsigned int value)
+{
+ unsigned int reg_value;
+ unsigned int time_out = PHY_BUSY_TIMEOUT;
+ int phy_addr;
+
+ phy_addr = ethernet_phy_get (eth_port_num);
+
+ /* first check that it is not busy */
+ do {
+ reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
+ if (time_out-- == 0) {
+ return false;
+ }
+ }
+ while (reg_value & ETH_SMI_BUSY);
+
+ /* not busy */
+ MV_REG_WRITE (MV64360_ETH_SMI_REG,
+ (phy_addr << 16) | (phy_reg << 21) |
+ ETH_SMI_OPCODE_WRITE | (value & 0xffff));
+ return true;
+}
+
+/*******************************************************************************
+ * eth_set_access_control - Config address decode parameters for Ethernet unit
+ *
+ * DESCRIPTION:
+ * This function configures the address decode parameters for the Gigabit
+ * Ethernet Controller according the given parameters struct.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
+ * ETH_WIN_PARAM *param Address decode parameter struct.
+ *
+ * OUTPUT:
+ * An access window is opened using the given access parameters.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void eth_set_access_control (ETH_PORT eth_port_num,
+ ETH_WIN_PARAM * param)
+{
+ unsigned int access_prot_reg;
+
+ /* Set access control register */
+ access_prot_reg = MV_REG_READ (MV64360_ETH_ACCESS_PROTECTION_REG
+ (eth_port_num));
+ access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */
+ access_prot_reg |= (param->access_ctrl << (param->win * 2));
+ MV_REG_WRITE (MV64360_ETH_ACCESS_PROTECTION_REG (eth_port_num),
+ access_prot_reg);
+
+ /* Set window Size reg (SR) */
+ MV_REG_WRITE ((MV64360_ETH_SIZE_REG_0 +
+ (ETH_SIZE_REG_GAP * param->win)),
+ (((param->size / 0x10000) - 1) << 16));
+
+ /* Set window Base address reg (BA) */
+ MV_REG_WRITE ((MV64360_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
+ (param->target | param->attributes | param->base_addr));
+ /* High address remap reg (HARR) */
+ if (param->win < 4)
+ MV_REG_WRITE ((MV64360_ETH_HIGH_ADDR_REMAP_REG_0 +
+ (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
+ param->high_addr);
+
+ /* Base address enable reg (BARER) */
+ if (param->enable == 1)
+ MV_RESET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
+ (1 << param->win));
+ else
+ MV_SET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
+ (1 << param->win));
+}
+
+/*******************************************************************************
+ * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ * This function prepares a Rx chained list of descriptors and packet
+ * buffers in a form of a ring. The routine must be called after port
+ * initialization routine and before port start routine.
+ * The Ethernet SDMA engine uses CPU bus addresses to access the various
+ * devices in the system (i.e. DRAM). This function uses the ethernet
+ * struct 'virtual to physical' routine (set by the user) to set the ring
+ * with physical addresses.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * int rx_desc_num Number of Rx descriptors
+ * int rx_buff_size Size of Rx buffer
+ * unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
+ * unsigned int rx_buff_base_addr Rx buffer memory area base addr.
+ *
+ * OUTPUT:
+ * The routine updates the Ethernet port control struct with information
+ * regarding the Rx descriptors and buffers.
+ *
+ * RETURN:
+ * false if the given descriptors memory area is not aligned according to
+ * Ethernet SDMA specifications.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ int rx_desc_num,
+ int rx_buff_size,
+ unsigned int rx_desc_base_addr,
+ unsigned int rx_buff_base_addr)
+{
+ ETH_RX_DESC *p_rx_desc;
+ ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */
+ unsigned int buffer_addr;
+ int ix; /* a counter */
+
+
+ p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
+ p_rx_prev_desc = p_rx_desc;
+ buffer_addr = rx_buff_base_addr;
+
+ /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+ if (rx_buff_base_addr & 0xF)
+ return false;
+
+ /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */
+ if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
+ return false;
+
+ /* Rx buffers must be 64-bit aligned. */
+ if ((rx_buff_base_addr + rx_buff_size) & 0x7)
+ return false;
+
+ /* initialize the Rx descriptors ring */
+ for (ix = 0; ix < rx_desc_num; ix++) {
+ p_rx_desc->buf_size = rx_buff_size;
+ p_rx_desc->byte_cnt = 0x0000;
+ p_rx_desc->cmd_sts =
+ ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+ p_rx_desc->next_desc_ptr =
+ ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
+ p_rx_desc->buf_ptr = buffer_addr;
+ p_rx_desc->return_info = 0x00000000;
+ D_CACHE_FLUSH_LINE (p_rx_desc, 0);
+ buffer_addr += rx_buff_size;
+ p_rx_prev_desc = p_rx_desc;
+ p_rx_desc = (ETH_RX_DESC *)
+ ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
+ }
+
+ /* Closing Rx descriptors ring */
+ p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
+ D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
+
+ /* Save Rx desc pointer to driver struct. */
+ CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+ USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
+
+ p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
+ (ETH_RX_DESC *) rx_desc_base_addr;
+ p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
+ rx_desc_num * RX_DESC_ALIGNED_SIZE;
+
+ p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
+
+ return true;
+}
+
+/*******************************************************************************
+ * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
+ *
+ * DESCRIPTION:
+ * This function prepares a Tx chained list of descriptors and packet
+ * buffers in a form of a ring. The routine must be called after port
+ * initialization routine and before port start routine.
+ * The Ethernet SDMA engine uses CPU bus addresses to access the various
+ * devices in the system (i.e. DRAM). This function uses the ethernet
+ * struct 'virtual to physical' routine (set by the user) to set the ring
+ * with physical addresses.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * int tx_desc_num Number of Tx descriptors
+ * int tx_buff_size Size of Tx buffer
+ * unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
+ * unsigned int tx_buff_base_addr Tx buffer memory area base addr.
+ *
+ * OUTPUT:
+ * The routine updates the Ethernet port control struct with information
+ * regarding the Tx descriptors and buffers.
+ *
+ * RETURN:
+ * false if the given descriptors memory area is not aligned according to
+ * Ethernet SDMA specifications.
+ * true otherwise.
+ *
+ *******************************************************************************/
+static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ int tx_desc_num,
+ int tx_buff_size,
+ unsigned int tx_desc_base_addr,
+ unsigned int tx_buff_base_addr)
+{
+
+ ETH_TX_DESC *p_tx_desc;
+ ETH_TX_DESC *p_tx_prev_desc;
+ unsigned int buffer_addr;
+ int ix; /* a counter */
+
+
+ /* save the first desc pointer to link with the last descriptor */
+ p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
+ p_tx_prev_desc = p_tx_desc;
+ buffer_addr = tx_buff_base_addr;
+
+ /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
+ if (tx_buff_base_addr & 0xF)
+ return false;
+
+ /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */
+ if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
+ || (tx_buff_size < TX_BUFFER_MIN_SIZE))
+ return false;
+
+ /* Initialize the Tx descriptors ring */
+ for (ix = 0; ix < tx_desc_num; ix++) {
+ p_tx_desc->byte_cnt = 0x0000;
+ p_tx_desc->l4i_chk = 0x0000;
+ p_tx_desc->cmd_sts = 0x00000000;
+ p_tx_desc->next_desc_ptr =
+ ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
+
+ p_tx_desc->buf_ptr = buffer_addr;
+ p_tx_desc->return_info = 0x00000000;
+ D_CACHE_FLUSH_LINE (p_tx_desc, 0);
+ buffer_addr += tx_buff_size;
+ p_tx_prev_desc = p_tx_desc;
+ p_tx_desc = (ETH_TX_DESC *)
+ ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
+
+ }
+ /* Closing Tx descriptors ring */
+ p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
+ D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
+ /* Set Tx desc pointer in driver struct. */
+ CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+ USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
+
+ /* Init Tx ring base and size parameters */
+ p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
+ (ETH_TX_DESC *) tx_desc_base_addr;
+ p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
+ (tx_desc_num * TX_DESC_ALIGNED_SIZE);
+
+ /* Add the queue to the list of Tx queues of this port */
+ p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
+
+ return true;
+}
+
+/*******************************************************************************
+ * eth_port_send - Send an Ethernet packet
+ *
+ * DESCRIPTION:
+ * This routine send a given packet described by p_pktinfo parameter. It
+ * supports transmitting of a packet spaned over multiple buffers. The
+ * routine updates 'curr' and 'first' indexes according to the packet
+ * segment passed to the routine. In case the packet segment is first,
+ * the 'first' index is update. In any case, the 'curr' index is updated.
+ * If the routine get into Tx resource error it assigns 'curr' index as
+ * 'first'. This way the function can abort Tx process of multiple
+ * descriptors per packet.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * PKT_INFO *p_pkt_info User packet buffer.
+ *
+ * OUTPUT:
+ * Tx ring 'curr' and 'first' indexes are updated.
+ *
+ * RETURN:
+ * ETH_QUEUE_FULL in case of Tx resource error.
+ * ETH_ERROR in case the routine can not access Tx desc ring.
+ * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_TX_DESC *p_tx_desc_first;
+ volatile ETH_TX_DESC *p_tx_desc_curr;
+ volatile ETH_TX_DESC *p_tx_next_desc_curr;
+ volatile ETH_TX_DESC *p_tx_desc_used;
+ unsigned int command_status;
+
+ /* Do not process Tx ring in case of Tx ring resource error */
+ if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+ return ETH_QUEUE_FULL;
+
+ /* Get the Tx Desc ring indexes */
+ CURR_TFD_GET (p_tx_desc_curr, tx_queue);
+ USED_TFD_GET (p_tx_desc_used, tx_queue);
+
+ if (p_tx_desc_curr == NULL)
+ return ETH_ERROR;
+
+ /* The following parameters are used to save readings from memory */
+ p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
+ command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
+
+ if (command_status & (ETH_TX_FIRST_DESC)) {
+ /* Update first desc */
+ FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
+ p_tx_desc_first = p_tx_desc_curr;
+ } else {
+ FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+ command_status |= ETH_BUFFER_OWNED_BY_DMA;
+ }
+
+ /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
+ /* boundary. We use the memory allocated for Tx descriptor. This memory */
+ /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
+ if (p_pkt_info->byte_cnt <= 8) {
+ printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */
+ return ETH_ERROR;
+
+ p_tx_desc_curr->buf_ptr =
+ (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
+ eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
+ p_pkt_info->byte_cnt);
+ } else
+ p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
+
+ p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
+ p_tx_desc_curr->return_info = p_pkt_info->return_info;
+
+ if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
+ /* Set last desc with DMA ownership and interrupt enable. */
+ p_tx_desc_curr->cmd_sts = command_status |
+ ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
+
+ if (p_tx_desc_curr != p_tx_desc_first)
+ p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
+
+ /* Flush CPU pipe */
+
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
+ CPU_PIPE_FLUSH;
+
+ /* Apply send command */
+ ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
+
+ /* Finish Tx packet. Update first desc in case of Tx resource error */
+ p_tx_desc_first = p_tx_next_desc_curr;
+ FIRST_TFD_SET (p_tx_desc_first, tx_queue);
+
+ } else {
+ p_tx_desc_curr->cmd_sts = command_status;
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
+ }
+
+ /* Check for ring index overlap in the Tx desc ring */
+ if (p_tx_next_desc_curr == p_tx_desc_used) {
+ /* Update the current descriptor */
+ CURR_TFD_SET (p_tx_desc_first, tx_queue);
+
+ p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
+ return ETH_QUEUE_LAST_RESOURCE;
+ } else {
+ /* Update the current descriptor */
+ CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
+ return ETH_OK;
+ }
+}
+
+/*******************************************************************************
+ * eth_tx_return_desc - Free all used Tx descriptors
+ *
+ * DESCRIPTION:
+ * This routine returns the transmitted packet information to the caller.
+ * It uses the 'first' index to support Tx desc return in case a transmit
+ * of a packet spanned over multiple buffer still in process.
+ * In case the Tx queue was in "resource error" condition, where there are
+ * no available Tx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * PKT_INFO *p_pkt_info User packet buffer.
+ *
+ * OUTPUT:
+ * Tx ring 'first' and 'used' indexes are updated.
+ *
+ * RETURN:
+ * ETH_ERROR in case the routine can not access Tx desc ring.
+ * ETH_RETRY in case there is transmission in process.
+ * ETH_END_OF_JOB if the routine has nothing to release.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
+ p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_TX_DESC *p_tx_desc_used = NULL;
+ volatile ETH_TX_DESC *p_tx_desc_first = NULL;
+ unsigned int command_status;
+
+
+ /* Get the Tx Desc ring indexes */
+ USED_TFD_GET (p_tx_desc_used, tx_queue);
+ FIRST_TFD_GET (p_tx_desc_first, tx_queue);
+
+
+ /* Sanity check */
+ if (p_tx_desc_used == NULL)
+ return ETH_ERROR;
+
+ command_status = p_tx_desc_used->cmd_sts;
+
+ /* Still transmitting... */
+ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+ return ETH_RETRY;
+ }
+
+ /* Stop release. About to overlap the current available Tx descriptor */
+ if ((p_tx_desc_used == p_tx_desc_first) &&
+ (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+ return ETH_END_OF_JOB;
+ }
+
+ /* Pass the packet information to the caller */
+ p_pkt_info->cmd_sts = command_status;
+ p_pkt_info->return_info = p_tx_desc_used->return_info;
+ p_tx_desc_used->return_info = 0;
+
+ /* Update the next descriptor to release. */
+ USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
+
+ /* Any Tx return cancels the Tx resource error status */
+ if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
+ p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
+
+ D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
+
+ return ETH_OK;
+
+}
+
+/*******************************************************************************
+ * eth_port_receive - Get received information from Rx ring.
+ *
+ * DESCRIPTION:
+ * This routine returns the received data to the caller. There is no
+ * data copying during routine operation. All information is returned
+ * using pointer to packet information struct passed from the caller.
+ * If the routine exhausts Rx ring resources then the resource error flag
+ * is set.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * PKT_INFO *p_pkt_info User packet buffer.
+ *
+ * OUTPUT:
+ * Rx ring current and used indexes are updated.
+ *
+ * RETURN:
+ * ETH_ERROR in case the routine can not access Rx desc ring.
+ * ETH_QUEUE_FULL if Rx ring resources are exhausted.
+ * ETH_END_OF_JOB if there is no received data.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_RX_DESC *p_rx_curr_desc;
+ volatile ETH_RX_DESC *p_rx_next_curr_desc;
+ volatile ETH_RX_DESC *p_rx_used_desc;
+ unsigned int command_status;
+
+ /* Do not process Rx ring in case of Rx ring resource error */
+ if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
+ printf ("\nRx Queue is full ...\n");
+ return ETH_QUEUE_FULL;
+ }
+
+ /* Get the Rx Desc ring 'curr and 'used' indexes */
+ CURR_RFD_GET (p_rx_curr_desc, rx_queue);
+ USED_RFD_GET (p_rx_used_desc, rx_queue);
+
+ /* Sanity check */
+ if (p_rx_curr_desc == NULL)
+ return ETH_ERROR;
+
+ /* The following parameters are used to save readings from memory */
+ p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
+ command_status = p_rx_curr_desc->cmd_sts;
+
+ /* Nothing to receive... */
+ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
+/* DP(printf("Rx: command_status: %08x\n", command_status)); */
+ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
+ return ETH_END_OF_JOB;
+ }
+
+ p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
+ p_pkt_info->cmd_sts = command_status;
+ p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
+ p_pkt_info->return_info = p_rx_curr_desc->return_info;
+ p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */
+
+ /* Clean the return info field to indicate that the packet has been */
+ /* moved to the upper layers */
+ p_rx_curr_desc->return_info = 0;
+
+ /* Update 'curr' in data structure */
+ CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
+
+ /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
+ if (p_rx_next_curr_desc == p_rx_used_desc)
+ p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
+
+ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
+ CPU_PIPE_FLUSH;
+ return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
+ *
+ * DESCRIPTION:
+ * This routine returns a Rx buffer back to the Rx ring. It retrieves the
+ * next 'used' descriptor and attached the returned buffer to it.
+ * In case the Rx ring was in "resource error" condition, where there are
+ * no available Rx resources, the function resets the resource error flag.
+ *
+ * INPUT:
+ * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * PKT_INFO *p_pkt_info Information on the returned buffer.
+ *
+ * OUTPUT:
+ * New available Rx resource in Rx descriptor ring.
+ *
+ * RETURN:
+ * ETH_ERROR in case the routine can not access Rx desc ring.
+ * ETH_OK otherwise.
+ *
+ *******************************************************************************/
+static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
+ p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO * p_pkt_info)
+{
+ volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */
+
+ /* Get 'used' Rx descriptor */
+ USED_RFD_GET (p_used_rx_desc, rx_queue);
+
+ /* Sanity check */
+ if (p_used_rx_desc == NULL)
+ return ETH_ERROR;
+
+ p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
+ p_used_rx_desc->return_info = p_pkt_info->return_info;
+ p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
+ p_used_rx_desc->buf_size = MV64360_RX_BUFFER_SIZE; /* Reset Buffer size */
+
+ /* Flush the write pipe */
+ CPU_PIPE_FLUSH;
+
+ /* Return the descriptor to DMA ownership */
+ p_used_rx_desc->cmd_sts =
+ ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
+
+ /* Flush descriptor and CPU pipe */
+ D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
+ CPU_PIPE_FLUSH;
+
+ /* Move the used descriptor pointer to the next descriptor */
+ USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
+
+ /* Any Rx return cancels the Rx resource error status */
+ if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
+ p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
+
+ return ETH_OK;
+}
+
+/*******************************************************************************
+ * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
+ *
+ * DESCRIPTION:
+ * This routine sets the RX coalescing interrupt mechanism parameter.
+ * This parameter is a timeout counter, that counts in 64 t_clk
+ * chunks ; that when timeout event occurs a maskable interrupt
+ * occurs.
+ * The parameter is calculated using the tClk of the MV-643xx chip
+ * , and the required delay of the interrupt in usec.
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet port number
+ * unsigned int t_clk t_clk of the MV-643xx chip in HZ units
+ * unsigned int delay Delay in usec
+ *
+ * OUTPUT:
+ * Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ * The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0 /* FIXME */
+static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
+ unsigned int t_clk,
+ unsigned int delay)
+{
+ unsigned int coal;
+
+ coal = ((t_clk / 1000000) * delay) / 64;
+ /* Set RX Coalescing mechanism */
+ MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
+ ((coal & 0x3fff) << 8) |
+ (MV_REG_READ
+ (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num))
+ & 0xffc000ff));
+ return coal;
+}
+
+#endif
+/*******************************************************************************
+ * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
+ *
+ * DESCRIPTION:
+ * This routine sets the TX coalescing interrupt mechanism parameter.
+ * This parameter is a timeout counter, that counts in 64 t_clk
+ * chunks ; that when timeout event occurs a maskable interrupt
+ * occurs.
+ * The parameter is calculated using the t_cLK frequency of the
+ * MV-643xx chip and the required delay in the interrupt in uSec
+ *
+ * INPUT:
+ * ETH_PORT eth_port_num Ethernet port number
+ * unsigned int t_clk t_clk of the MV-643xx chip in HZ units
+ * unsigned int delay Delay in uSeconds
+ *
+ * OUTPUT:
+ * Interrupt coalescing mechanism value is set in MV-643xx chip.
+ *
+ * RETURN:
+ * The interrupt coalescing value set in the gigE port.
+ *
+ *******************************************************************************/
+#if 0 /* FIXME */
+static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
+ unsigned int t_clk,
+ unsigned int delay)
+{
+ unsigned int coal;
+
+ coal = ((t_clk / 1000000) * delay) / 64;
+ /* Set TX Coalescing mechanism */
+ MV_REG_WRITE (MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
+ coal << 4);
+ return coal;
+}
+#endif
+
+/*******************************************************************************
+ * eth_b_copy - Copy bytes from source to destination
+ *
+ * DESCRIPTION:
+ * This function supports the eight bytes limitation on Tx buffer size.
+ * The routine will zero eight bytes starting from the destination address
+ * followed by copying bytes from the source address to the destination.
+ *
+ * INPUT:
+ * unsigned int src_addr 32 bit source address.
+ * unsigned int dst_addr 32 bit destination address.
+ * int byte_count Number of bytes to copy.
+ *
+ * OUTPUT:
+ * See description.
+ *
+ * RETURN:
+ * None.
+ *
+ *******************************************************************************/
+static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
+ int byte_count)
+{
+ /* Zero the dst_addr area */
+ *(unsigned int *) dst_addr = 0x0;
+
+ while (byte_count != 0) {
+ *(char *) dst_addr = *(char *) src_addr;
+ dst_addr++;
+ src_addr++;
+ byte_count--;
+ }
+}
diff --git a/board/esd/cpci750/mv_eth.h b/board/esd/cpci750/mv_eth.h
new file mode 100644
index 0000000..c57e679
--- /dev/null
+++ b/board/esd/cpci750/mv_eth.h
@@ -0,0 +1,844 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mv_eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __DB64360_ETH_H__
+#define __DB64360_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+#include <net.h>
+#include "mv_regs.h"
+#include "../../Marvell/common/ppc_error_no.h"
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The first part is the high level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
+#ifndef MAX_SKB_FRAGS
+#define MAX_SKB_FRAGS 0
+#endif
+
+/* Port attributes */
+/*#define MAX_RX_QUEUE_NUM 8*/
+/*#define MAX_TX_QUEUE_NUM 8*/
+#define MAX_RX_QUEUE_NUM 1
+#define MAX_TX_QUEUE_NUM 1
+
+
+/* Use one TX queue and one RX queue */
+#define MV64360_TX_QUEUE_NUM 1
+#define MV64360_RX_QUEUE_NUM 1
+
+/*
+ * Number of RX / TX descriptors on RX / TX rings.
+ * Note that allocating RX descriptors is done by allocating the RX
+ * ring AND a preallocated RX buffers (skb's) for each descriptor.
+ * The TX descriptors only allocates the TX descriptors ring,
+ * with no pre allocated TX buffers (skb's are allocated by higher layers.
+ */
+
+/* Default TX ring size is 10 descriptors */
+#ifdef CONFIG_MV64360_ETH_TXQUEUE_SIZE
+#define MV64360_TX_QUEUE_SIZE CONFIG_MV64360_ETH_TXQUEUE_SIZE
+#else
+#define MV64360_TX_QUEUE_SIZE 4
+#endif
+
+/* Default RX ring size is 4 descriptors */
+#ifdef CONFIG_MV64360_ETH_RXQUEUE_SIZE
+#define MV64360_RX_QUEUE_SIZE CONFIG_MV64360_ETH_RXQUEUE_SIZE
+#else
+#define MV64360_RX_QUEUE_SIZE 4
+#endif
+
+#ifdef CONFIG_RX_BUFFER_SIZE
+#define MV64360_RX_BUFFER_SIZE CONFIG_RX_BUFFER_SIZE
+#else
+#define MV64360_RX_BUFFER_SIZE 1600
+#endif
+
+#ifdef CONFIG_TX_BUFFER_SIZE
+#define MV64360_TX_BUFFER_SIZE CONFIG_TX_BUFFER_SIZE
+#else
+#define MV64360_TX_BUFFER_SIZE 1600
+#endif
+
+
+/*
+ * Network device statistics. Akin to the 2.0 ether stats but
+ * with byte counters.
+ */
+
+struct net_device_stats
+{
+ unsigned long rx_packets; /* total packets received */
+ unsigned long tx_packets; /* total packets transmitted */
+ unsigned long rx_bytes; /* total bytes received */
+ unsigned long tx_bytes; /* total bytes transmitted */
+ unsigned long rx_errors; /* bad packets received */
+ unsigned long tx_errors; /* packet transmit problems */
+ unsigned long rx_dropped; /* no space in linux buffers */
+ unsigned long tx_dropped; /* no space available in linux */
+ unsigned long multicast; /* multicast packets received */
+ unsigned long collisions;
+
+ /* detailed rx_errors: */
+ unsigned long rx_length_errors;
+ unsigned long rx_over_errors; /* receiver ring buff overflow */
+ unsigned long rx_crc_errors; /* recved pkt with crc error */
+ unsigned long rx_frame_errors; /* recv'd frame alignment error */
+ unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+ unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+ unsigned long tx_aborted_errors;
+ unsigned long tx_carrier_errors;
+ unsigned long tx_fifo_errors;
+ unsigned long tx_heartbeat_errors;
+ unsigned long tx_window_errors;
+
+ /* for cslip etc */
+ unsigned long rx_compressed;
+ unsigned long tx_compressed;
+};
+
+
+/* Private data structure used for ethernet device */
+struct mv64360_eth_priv {
+ unsigned int port_num;
+ struct net_device_stats *stats;
+
+/* to buffer area aligned */
+ char * p_eth_tx_buffer[MV64360_TX_QUEUE_SIZE+1]; /*pointers to alligned tx buffs in memory space */
+ char * p_eth_rx_buffer[MV64360_RX_QUEUE_SIZE+1]; /*pointers to allinged rx buffs in memory space */
+
+ /* Size of Tx Ring per queue */
+ unsigned int tx_ring_size [MAX_TX_QUEUE_NUM];
+
+
+ /* Size of Rx Ring per queue */
+ unsigned int rx_ring_size [MAX_RX_QUEUE_NUM];
+
+ /* Magic Number for Ethernet running */
+ unsigned int eth_running;
+
+};
+
+
+int mv64360_eth_init (struct eth_device *dev);
+int mv64360_eth_stop (struct eth_device *dev);
+int mv64360_eth_start_xmit (struct eth_device*, volatile void* packet, int length);
+/* return db64360_eth0_poll(); */
+
+int mv64360_eth_open (struct eth_device *dev);
+
+
+/*************************************************************************
+**************************************************************************
+**************************************************************************
+* The second part is the low level driver of the gigE ethernet ports. *
+**************************************************************************
+**************************************************************************
+*************************************************************************/
+
+
+/********************************************************************************
+ * Header File for : MV-643xx network interface header
+ *
+ * DESCRIPTION:
+ * This header file contains macros typedefs and function declaration for
+ * the Marvell Gig Bit Ethernet Controller.
+ *
+ * DEPENDENCIES:
+ * None.
+ *
+ *******************************************************************************/
+
+
+#ifdef CONFIG_SPECIAL_CONSISTENT_MEMORY
+#ifdef CONFIG_MV64360_SRAM_CACHEABLE
+/* In case SRAM is cacheable but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) \
+{ \
+ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case SRAM is cache coherent or non-cacheable */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif
+#else
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/* In case of descriptors on DDR but not cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) \
+{ \
+ __asm__ __volatile__ ("dcbf %0,%1" : : "r" (addr), "r" (offset)); \
+}
+#else
+/* In case of descriptors on DDR and cache coherent */
+#define D_CACHE_FLUSH_LINE(addr, offset) ;
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+#endif /* CONFIG_SPECIAL_CONSISTENT_MEMORY */
+
+
+#define CPU_PIPE_FLUSH \
+{ \
+ __asm__ __volatile__ ("eieio"); \
+}
+
+
+/* defines */
+
+/* Default port configuration value */
+#define PORT_CONFIG_VALUE \
+ ETH_UNICAST_NORMAL_MODE | \
+ ETH_DEFAULT_RX_QUEUE_0 | \
+ ETH_DEFAULT_RX_ARP_QUEUE_0 | \
+ ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \
+ ETH_RECEIVE_BC_IF_IP | \
+ ETH_RECEIVE_BC_IF_ARP | \
+ ETH_CAPTURE_TCP_FRAMES_DIS | \
+ ETH_CAPTURE_UDP_FRAMES_DIS | \
+ ETH_DEFAULT_RX_TCP_QUEUE_0 | \
+ ETH_DEFAULT_RX_UDP_QUEUE_0 | \
+ ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+/* Default port extend configuration value */
+#define PORT_CONFIG_EXTEND_VALUE \
+ ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \
+ ETH_PARTITION_DISABLE
+
+
+/* Default sdma control value */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define PORT_SDMA_CONFIG_VALUE \
+ ETH_RX_BURST_SIZE_16_64BIT | \
+ GT_ETH_IPG_INT_RX(0) | \
+ ETH_TX_BURST_SIZE_16_64BIT;
+#else
+#define PORT_SDMA_CONFIG_VALUE \
+ ETH_RX_BURST_SIZE_4_64BIT | \
+ GT_ETH_IPG_INT_RX(0) | \
+ ETH_TX_BURST_SIZE_4_64BIT;
+#endif
+
+#define GT_ETH_IPG_INT_RX(value) \
+ ((value & 0x3fff) << 8)
+
+/* Default port serial control value */
+#define PORT_SERIAL_CONTROL_VALUE \
+ ETH_FORCE_LINK_PASS | \
+ ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \
+ ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
+ ETH_ADV_SYMMETRIC_FLOW_CTRL | \
+ ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ ETH_FORCE_BP_MODE_NO_JAM | \
+ BIT9 | \
+ ETH_DO_NOT_FORCE_LINK_FAIL | \
+ ETH_RETRANSMIT_16_ETTEMPTS | \
+ ETH_ENABLE_AUTO_NEG_SPEED_GMII | \
+ ETH_DTE_ADV_0 | \
+ ETH_DISABLE_AUTO_NEG_BYPASS | \
+ ETH_AUTO_NEG_NO_CHANGE | \
+ ETH_MAX_RX_PACKET_1552BYTE | \
+ ETH_CLR_EXT_LOOPBACK | \
+ ETH_SET_FULL_DUPLEX_MODE | \
+ ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX;
+
+#define RX_BUFFER_MAX_SIZE 0xFFFF
+#define TX_BUFFER_MAX_SIZE 0xFFFF /* Buffer are limited to 64k */
+
+#define RX_BUFFER_MIN_SIZE 0x8
+#define TX_BUFFER_MIN_SIZE 0x8
+
+/* Tx WRR confoguration macros */
+#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */
+#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_fFFF /* PMTBS register (default) */
+#define PORT_TOKEN_RATE 1023 /* PTTBRC register (default) */
+
+/* MAC accepet/reject macros */
+#define ACCEPT_MAC_ADDR 0
+#define REJECT_MAC_ADDR 1
+
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define RX_DESC_ALIGNED_SIZE 0x20
+#define TX_DESC_ALIGNED_SIZE 0x20
+
+/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
+#define TX_BUF_OFFSET_IN_DESC 0x18
+/* Buffer offset from buffer pointer */
+#define RX_BUF_OFFSET 0x2
+
+/* Gap define */
+#define ETH_BAR_GAP 0x8
+#define ETH_SIZE_REG_GAP 0x8
+#define ETH_HIGH_ADDR_REMAP_REG_GAP 0x4
+#define ETH_PORT_ACCESS_CTRL_GAP 0x4
+
+/* Gigabit Ethernet Unit Global Registers */
+
+/* MIB Counters register definitions */
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4
+#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8
+#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc
+#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10
+#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14
+#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18
+#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c
+#define ETH_MIB_FRAMES_64_OCTETS 0x20
+#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24
+#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28
+#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c
+#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30
+#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34
+#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38
+#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c
+#define ETH_MIB_GOOD_FRAMES_SENT 0x40
+#define ETH_MIB_EXCESSIVE_COLLISION 0x44
+#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48
+#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c
+#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
+#define ETH_MIB_FC_SENT 0x54
+#define ETH_MIB_GOOD_FC_RECEIVED 0x58
+#define ETH_MIB_BAD_FC_RECEIVED 0x5c
+#define ETH_MIB_UNDERSIZE_RECEIVED 0x60
+#define ETH_MIB_FRAGMENTS_RECEIVED 0x64
+#define ETH_MIB_OVERSIZE_RECEIVED 0x68
+#define ETH_MIB_JABBER_RECEIVED 0x6c
+#define ETH_MIB_MAC_RECEIVE_ERROR 0x70
+#define ETH_MIB_BAD_CRC_EVENT 0x74
+#define ETH_MIB_COLLISION 0x78
+#define ETH_MIB_LATE_COLLISION 0x7c
+
+/* Port serial status reg (PSR) */
+#define ETH_INTERFACE_GMII_MII 0
+#define ETH_INTERFACE_PCM BIT0
+#define ETH_LINK_IS_DOWN 0
+#define ETH_LINK_IS_UP BIT1
+#define ETH_PORT_AT_HALF_DUPLEX 0
+#define ETH_PORT_AT_FULL_DUPLEX BIT2
+#define ETH_RX_FLOW_CTRL_DISABLED 0
+#define ETH_RX_FLOW_CTRL_ENBALED BIT3
+#define ETH_GMII_SPEED_100_10 0
+#define ETH_GMII_SPEED_1000 BIT4
+#define ETH_MII_SPEED_10 0
+#define ETH_MII_SPEED_100 BIT5
+#define ETH_NO_TX 0
+#define ETH_TX_IN_PROGRESS BIT7
+#define ETH_BYPASS_NO_ACTIVE 0
+#define ETH_BYPASS_ACTIVE BIT8
+#define ETH_PORT_NOT_AT_PARTITION_STATE 0
+#define ETH_PORT_AT_PARTITION_STATE BIT9
+#define ETH_PORT_TX_FIFO_NOT_EMPTY 0
+#define ETH_PORT_TX_FIFO_EMPTY BIT10
+
+
+/* These macros describes the Port configuration reg (Px_cR) bits */
+#define ETH_UNICAST_NORMAL_MODE 0
+#define ETH_UNICAST_PROMISCUOUS_MODE BIT0
+#define ETH_DEFAULT_RX_QUEUE_0 0
+#define ETH_DEFAULT_RX_QUEUE_1 BIT1
+#define ETH_DEFAULT_RX_QUEUE_2 BIT2
+#define ETH_DEFAULT_RX_QUEUE_3 (BIT2 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_4 BIT3
+#define ETH_DEFAULT_RX_QUEUE_5 (BIT3 | BIT1)
+#define ETH_DEFAULT_RX_QUEUE_6 (BIT3 | BIT2)
+#define ETH_DEFAULT_RX_QUEUE_7 (BIT3 | BIT2 | BIT1)
+#define ETH_DEFAULT_RX_ARP_QUEUE_0 0
+#define ETH_DEFAULT_RX_ARP_QUEUE_1 BIT4
+#define ETH_DEFAULT_RX_ARP_QUEUE_2 BIT5
+#define ETH_DEFAULT_RX_ARP_QUEUE_3 (BIT5 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_4 BIT6
+#define ETH_DEFAULT_RX_ARP_QUEUE_5 (BIT6 | BIT4)
+#define ETH_DEFAULT_RX_ARP_QUEUE_6 (BIT6 | BIT5)
+#define ETH_DEFAULT_RX_ARP_QUEUE_7 (BIT6 | BIT5 | BIT4)
+#define ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP 0
+#define ETH_REJECT_BC_IF_NOT_IP_OR_ARP BIT7
+#define ETH_RECEIVE_BC_IF_IP 0
+#define ETH_REJECT_BC_IF_IP BIT8
+#define ETH_RECEIVE_BC_IF_ARP 0
+#define ETH_REJECT_BC_IF_ARP BIT9
+#define ETH_TX_AM_NO_UPDATE_ERROR_SUMMARY BIT12
+#define ETH_CAPTURE_TCP_FRAMES_DIS 0
+#define ETH_CAPTURE_TCP_FRAMES_EN BIT14
+#define ETH_CAPTURE_UDP_FRAMES_DIS 0
+#define ETH_CAPTURE_UDP_FRAMES_EN BIT15
+#define ETH_DEFAULT_RX_TCP_QUEUE_0 0
+#define ETH_DEFAULT_RX_TCP_QUEUE_1 BIT16
+#define ETH_DEFAULT_RX_TCP_QUEUE_2 BIT17
+#define ETH_DEFAULT_RX_TCP_QUEUE_3 (BIT17 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_4 BIT18
+#define ETH_DEFAULT_RX_TCP_QUEUE_5 (BIT18 | BIT16)
+#define ETH_DEFAULT_RX_TCP_QUEUE_6 (BIT18 | BIT17)
+#define ETH_DEFAULT_RX_TCP_QUEUE_7 (BIT18 | BIT17 | BIT16)
+#define ETH_DEFAULT_RX_UDP_QUEUE_0 0
+#define ETH_DEFAULT_RX_UDP_QUEUE_1 BIT19
+#define ETH_DEFAULT_RX_UDP_QUEUE_2 BIT20
+#define ETH_DEFAULT_RX_UDP_QUEUE_3 (BIT20 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_4 (BIT21
+#define ETH_DEFAULT_RX_UDP_QUEUE_5 (BIT21 | BIT19)
+#define ETH_DEFAULT_RX_UDP_QUEUE_6 (BIT21 | BIT20)
+#define ETH_DEFAULT_RX_UDP_QUEUE_7 (BIT21 | BIT20 | BIT19)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_0 0
+#define ETH_DEFAULT_RX_BPDU_QUEUE_1 BIT22
+#define ETH_DEFAULT_RX_BPDU_QUEUE_2 BIT23
+#define ETH_DEFAULT_RX_BPDU_QUEUE_3 (BIT23 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_4 BIT24
+#define ETH_DEFAULT_RX_BPDU_QUEUE_5 (BIT24 | BIT22)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_6 (BIT24 | BIT23)
+#define ETH_DEFAULT_RX_BPDU_QUEUE_7 (BIT24 | BIT23 | BIT22)
+
+
+/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
+#define ETH_CLASSIFY_EN BIT0
+#define ETH_SPAN_BPDU_PACKETS_AS_NORMAL 0
+#define ETH_SPAN_BPDU_PACKETS_TO_RX_QUEUE_7 BIT1
+#define ETH_PARTITION_DISABLE 0
+#define ETH_PARTITION_ENABLE BIT2
+
+
+/* Tx/Rx queue command reg (RQCR/TQCR)*/
+#define ETH_QUEUE_0_ENABLE BIT0
+#define ETH_QUEUE_1_ENABLE BIT1
+#define ETH_QUEUE_2_ENABLE BIT2
+#define ETH_QUEUE_3_ENABLE BIT3
+#define ETH_QUEUE_4_ENABLE BIT4
+#define ETH_QUEUE_5_ENABLE BIT5
+#define ETH_QUEUE_6_ENABLE BIT6
+#define ETH_QUEUE_7_ENABLE BIT7
+#define ETH_QUEUE_0_DISABLE BIT8
+#define ETH_QUEUE_1_DISABLE BIT9
+#define ETH_QUEUE_2_DISABLE BIT10
+#define ETH_QUEUE_3_DISABLE BIT11
+#define ETH_QUEUE_4_DISABLE BIT12
+#define ETH_QUEUE_5_DISABLE BIT13
+#define ETH_QUEUE_6_DISABLE BIT14
+#define ETH_QUEUE_7_DISABLE BIT15
+
+
+/* These macros describes the Port Sdma configuration reg (SDCR) bits */
+#define ETH_RIFB BIT0
+#define ETH_RX_BURST_SIZE_1_64BIT 0
+#define ETH_RX_BURST_SIZE_2_64BIT BIT1
+#define ETH_RX_BURST_SIZE_4_64BIT BIT2
+#define ETH_RX_BURST_SIZE_8_64BIT (BIT2 | BIT1)
+#define ETH_RX_BURST_SIZE_16_64BIT BIT3
+#define ETH_BLM_RX_NO_SWAP BIT4
+#define ETH_BLM_RX_BYTE_SWAP 0
+#define ETH_BLM_TX_NO_SWAP BIT5
+#define ETH_BLM_TX_BYTE_SWAP 0
+#define ETH_DESCRIPTORS_BYTE_SWAP BIT6
+#define ETH_DESCRIPTORS_NO_SWAP 0
+#define ETH_TX_BURST_SIZE_1_64BIT 0
+#define ETH_TX_BURST_SIZE_2_64BIT BIT22
+#define ETH_TX_BURST_SIZE_4_64BIT BIT23
+#define ETH_TX_BURST_SIZE_8_64BIT (BIT23 | BIT22)
+#define ETH_TX_BURST_SIZE_16_64BIT BIT24
+
+
+/* These macros describes the Port serial control reg (PSCR) bits */
+#define ETH_SERIAL_PORT_DISABLE 0
+#define ETH_SERIAL_PORT_ENABLE BIT0
+#define ETH_FORCE_LINK_PASS BIT1
+#define ETH_DO_NOT_FORCE_LINK_PASS 0
+#define ETH_ENABLE_AUTO_NEG_FOR_DUPLX 0
+#define ETH_DISABLE_AUTO_NEG_FOR_DUPLX BIT2
+#define ETH_ENABLE_AUTO_NEG_FOR_FLOW_CTRL 0
+#define ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL BIT3
+#define ETH_ADV_NO_FLOW_CTRL 0
+#define ETH_ADV_SYMMETRIC_FLOW_CTRL BIT4
+#define ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0
+#define ETH_FORCE_FC_MODE_TX_PAUSE_DIS BIT5
+#define ETH_FORCE_BP_MODE_NO_JAM 0
+#define ETH_FORCE_BP_MODE_JAM_TX BIT7
+#define ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR BIT8
+#define ETH_FORCE_LINK_FAIL 0
+#define ETH_DO_NOT_FORCE_LINK_FAIL BIT10
+#define ETH_RETRANSMIT_16_ETTEMPTS 0
+#define ETH_RETRANSMIT_FOREVER BIT11
+#define ETH_DISABLE_AUTO_NEG_SPEED_GMII BIT13
+#define ETH_ENABLE_AUTO_NEG_SPEED_GMII 0
+#define ETH_DTE_ADV_0 0
+#define ETH_DTE_ADV_1 BIT14
+#define ETH_DISABLE_AUTO_NEG_BYPASS 0
+#define ETH_ENABLE_AUTO_NEG_BYPASS BIT15
+#define ETH_AUTO_NEG_NO_CHANGE 0
+#define ETH_RESTART_AUTO_NEG BIT16
+#define ETH_MAX_RX_PACKET_1518BYTE 0
+#define ETH_MAX_RX_PACKET_1522BYTE BIT17
+#define ETH_MAX_RX_PACKET_1552BYTE BIT18
+#define ETH_MAX_RX_PACKET_9022BYTE (BIT18 | BIT17)
+#define ETH_MAX_RX_PACKET_9192BYTE BIT19
+#define ETH_MAX_RX_PACKET_9700BYTE (BIT19 | BIT17)
+#define ETH_SET_EXT_LOOPBACK BIT20
+#define ETH_CLR_EXT_LOOPBACK 0
+#define ETH_SET_FULL_DUPLEX_MODE BIT21
+#define ETH_SET_HALF_DUPLEX_MODE 0
+#define ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX BIT22
+#define ETH_DISABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
+#define ETH_SET_GMII_SPEED_TO_10_100 0
+#define ETH_SET_GMII_SPEED_TO_1000 BIT23
+#define ETH_SET_MII_SPEED_TO_10 0
+#define ETH_SET_MII_SPEED_TO_100 BIT24
+
+
+/* SMI reg */
+#define ETH_SMI_BUSY BIT28 /* 0 - Write, 1 - Read */
+#define ETH_SMI_READ_VALID BIT27 /* 0 - Write, 1 - Read */
+#define ETH_SMI_OPCODE_WRITE 0 /* Completion of Read operation */
+#define ETH_SMI_OPCODE_READ BIT26 /* Operation is in progress */
+
+/* SDMA command status fields macros */
+
+/* Tx & Rx descriptors status */
+#define ETH_ERROR_SUMMARY (BIT0)
+
+/* Tx & Rx descriptors command */
+#define ETH_BUFFER_OWNED_BY_DMA (BIT31)
+
+/* Tx descriptors status */
+#define ETH_LC_ERROR (0 )
+#define ETH_UR_ERROR (BIT1 )
+#define ETH_RL_ERROR (BIT2 )
+#define ETH_LLC_SNAP_FORMAT (BIT9 )
+
+/* Rx descriptors status */
+#define ETH_CRC_ERROR (0 )
+#define ETH_OVERRUN_ERROR (BIT1 )
+#define ETH_MAX_FRAME_LENGTH_ERROR (BIT2 )
+#define ETH_RESOURCE_ERROR ((BIT2 | BIT1))
+#define ETH_VLAN_TAGGED (BIT19)
+#define ETH_BPDU_FRAME (BIT20)
+#define ETH_TCP_FRAME_OVER_IP_V_4 (0 )
+#define ETH_UDP_FRAME_OVER_IP_V_4 (BIT21)
+#define ETH_OTHER_FRAME_TYPE (BIT22)
+#define ETH_LAYER_2_IS_ETH_V_2 (BIT23)
+#define ETH_FRAME_TYPE_IP_V_4 (BIT24)
+#define ETH_FRAME_HEADER_OK (BIT25)
+#define ETH_RX_LAST_DESC (BIT26)
+#define ETH_RX_FIRST_DESC (BIT27)
+#define ETH_UNKNOWN_DESTINATION_ADDR (BIT28)
+#define ETH_RX_ENABLE_INTERRUPT (BIT29)
+#define ETH_LAYER_4_CHECKSUM_OK (BIT30)
+
+/* Rx descriptors byte count */
+#define ETH_FRAME_FRAGMENTED (BIT2)
+
+/* Tx descriptors command */
+#define ETH_LAYER_4_CHECKSUM_FIRST_DESC (BIT10)
+#define ETH_FRAME_SET_TO_VLAN (BIT15)
+#define ETH_TCP_FRAME (0 )
+#define ETH_UDP_FRAME (BIT16)
+#define ETH_GEN_TCP_UDP_CHECKSUM (BIT17)
+#define ETH_GEN_IP_V_4_CHECKSUM (BIT18)
+#define ETH_ZERO_PADDING (BIT19)
+#define ETH_TX_LAST_DESC (BIT20)
+#define ETH_TX_FIRST_DESC (BIT21)
+#define ETH_GEN_CRC (BIT22)
+#define ETH_TX_ENABLE_INTERRUPT (BIT23)
+#define ETH_AUTO_MODE (BIT30)
+
+/* Address decode parameters */
+/* Ethernet Base Address Register bits */
+#define EBAR_TARGET_DRAM 0x00000000
+#define EBAR_TARGET_DEVICE 0x00000001
+#define EBAR_TARGET_CBS 0x00000002
+#define EBAR_TARGET_PCI0 0x00000003
+#define EBAR_TARGET_PCI1 0x00000004
+#define EBAR_TARGET_CUNIT 0x00000005
+#define EBAR_TARGET_AUNIT 0x00000006
+#define EBAR_TARGET_GUNIT 0x00000007
+
+/* Window attributes */
+#define EBAR_ATTR_DRAM_CS0 0x00000E00
+#define EBAR_ATTR_DRAM_CS1 0x00000D00
+#define EBAR_ATTR_DRAM_CS2 0x00000B00
+#define EBAR_ATTR_DRAM_CS3 0x00000700
+
+/* DRAM Target interface */
+#define EBAR_ATTR_DRAM_NO_CACHE_COHERENCY 0x00000000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WT 0x00001000
+#define EBAR_ATTR_DRAM_CACHE_COHERENCY_WB 0x00002000
+
+/* Device Bus Target interface */
+#define EBAR_ATTR_DEVICE_DEVCS0 0x00001E00
+#define EBAR_ATTR_DEVICE_DEVCS1 0x00001D00
+#define EBAR_ATTR_DEVICE_DEVCS2 0x00001B00
+#define EBAR_ATTR_DEVICE_DEVCS3 0x00001700
+#define EBAR_ATTR_DEVICE_BOOTCS3 0x00000F00
+
+/* PCI Target interface */
+#define EBAR_ATTR_PCI_BYTE_SWAP 0x00000000
+#define EBAR_ATTR_PCI_NO_SWAP 0x00000100
+#define EBAR_ATTR_PCI_BYTE_WORD_SWAP 0x00000200
+#define EBAR_ATTR_PCI_WORD_SWAP 0x00000300
+#define EBAR_ATTR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000
+#define EBAR_ATTR_PCI_NO_SNOOP_ASSERT 0x00000400
+#define EBAR_ATTR_PCI_IO_SPACE 0x00000000
+#define EBAR_ATTR_PCI_MEMORY_SPACE 0x00000800
+#define EBAR_ATTR_PCI_REQ64_FORCE 0x00000000
+#define EBAR_ATTR_PCI_REQ64_SIZE 0x00001000
+
+/* CPU 60x bus or internal SRAM interface */
+#define EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000
+#define EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100
+#define EBAR_ATTR_CBS_SRAM 0x00000000
+#define EBAR_ATTR_CBS_CPU_BUS 0x00000800
+
+/* Window access control */
+#define EWIN_ACCESS_NOT_ALLOWED 0
+#define EWIN_ACCESS_READ_ONLY BIT0
+#define EWIN_ACCESS_FULL (BIT1 | BIT0)
+#define EWIN0_ACCESS_MASK 0x0003
+#define EWIN1_ACCESS_MASK 0x000C
+#define EWIN2_ACCESS_MASK 0x0030
+#define EWIN3_ACCESS_MASK 0x00C0
+
+/* typedefs */
+
+typedef enum _eth_port
+{
+ ETH_0 = 0,
+ ETH_1 = 1,
+ ETH_2 = 2
+}ETH_PORT;
+
+typedef enum _eth_func_ret_status
+{
+ ETH_OK, /* Returned as expected. */
+ ETH_ERROR, /* Fundamental error. */
+ ETH_RETRY, /* Could not process request. Try later. */
+ ETH_END_OF_JOB, /* Ring has nothing to process. */
+ ETH_QUEUE_FULL, /* Ring resource error. */
+ ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */
+}ETH_FUNC_RET_STATUS;
+
+typedef enum _eth_queue
+{
+ ETH_Q0 = 0,
+ ETH_Q1 = 1,
+ ETH_Q2 = 2,
+ ETH_Q3 = 3,
+ ETH_Q4 = 4,
+ ETH_Q5 = 5,
+ ETH_Q6 = 6,
+ ETH_Q7 = 7
+} ETH_QUEUE;
+
+typedef enum _addr_win
+{
+ ETH_WIN0,
+ ETH_WIN1,
+ ETH_WIN2,
+ ETH_WIN3,
+ ETH_WIN4,
+ ETH_WIN5
+} ETH_ADDR_WIN;
+
+typedef enum _eth_target
+{
+ ETH_TARGET_DRAM ,
+ ETH_TARGET_DEVICE,
+ ETH_TARGET_CBS ,
+ ETH_TARGET_PCI0 ,
+ ETH_TARGET_PCI1
+}ETH_TARGET;
+
+typedef struct _eth_rx_desc
+{
+ unsigned short byte_cnt ; /* Descriptor buffer byte count */
+ unsigned short buf_size ; /* Buffer size */
+ unsigned int cmd_sts ; /* Descriptor command status */
+ unsigned int next_desc_ptr; /* Next descriptor pointer */
+ unsigned int buf_ptr ; /* Descriptor buffer pointer */
+ unsigned int return_info ; /* User resource return information */
+} ETH_RX_DESC;
+
+
+typedef struct _eth_tx_desc
+{
+ unsigned short byte_cnt ; /* Descriptor buffer byte count */
+ unsigned short l4i_chk ; /* CPU provided TCP Checksum */
+ unsigned int cmd_sts ; /* Descriptor command status */
+ unsigned int next_desc_ptr; /* Next descriptor pointer */
+ unsigned int buf_ptr ; /* Descriptor buffer pointer */
+ unsigned int return_info ; /* User resource return information */
+} ETH_TX_DESC;
+
+/* Unified struct for Rx and Tx operations. The user is not required to */
+/* be familier with neither Tx nor Rx descriptors. */
+typedef struct _pkt_info
+{
+ unsigned short byte_cnt ; /* Descriptor buffer byte count */
+ unsigned short l4i_chk ; /* Tx CPU provided TCP Checksum */
+ unsigned int cmd_sts ; /* Descriptor command status */
+ unsigned int buf_ptr ; /* Descriptor buffer pointer */
+ unsigned int return_info ; /* User resource return information */
+} PKT_INFO;
+
+
+typedef struct _eth_win_param
+{
+ ETH_ADDR_WIN win; /* Window number. See ETH_ADDR_WIN enum */
+ ETH_TARGET target; /* System targets. See ETH_TARGET enum */
+ unsigned short attributes; /* BAR attributes. See above macros. */
+ unsigned int base_addr; /* Window base address in unsigned int form */
+ unsigned int high_addr; /* Window high address in unsigned int form */
+ unsigned int size; /* Size in MBytes. Must be % 64Kbyte. */
+ bool enable; /* Enable/disable access to the window. */
+ unsigned short access_ctrl; /* Access ctrl register. see above macros */
+} ETH_WIN_PARAM;
+
+
+/* Ethernet port specific infomation */
+
+typedef struct _eth_port_ctrl
+{
+ ETH_PORT port_num; /* User Ethernet port number */
+ int port_phy_addr; /* User phy address of Ethrnet port */
+ unsigned char port_mac_addr[6]; /* User defined port MAC address. */
+ unsigned int port_config; /* User port configuration value */
+ unsigned int port_config_extend; /* User port config extend value */
+ unsigned int port_sdma_config; /* User port SDMA config value */
+ unsigned int port_serial_control; /* User port serial control value */
+ unsigned int port_tx_queue_command; /* Port active Tx queues summary */
+ unsigned int port_rx_queue_command; /* Port active Rx queues summary */
+
+ /* User function to cast virtual address to CPU bus address */
+ unsigned int (*port_virt_to_phys)(unsigned int addr);
+ /* User scratch pad for user specific data structures */
+ void *port_private;
+
+ bool rx_resource_err[MAX_RX_QUEUE_NUM]; /* Rx ring resource error flag */
+ bool tx_resource_err[MAX_TX_QUEUE_NUM]; /* Tx ring resource error flag */
+
+ /* Tx/Rx rings managment indexes fields. For driver use */
+
+ /* Next available Rx resource */
+ volatile ETH_RX_DESC *p_rx_curr_desc_q[MAX_RX_QUEUE_NUM];
+ /* Returning Rx resource */
+ volatile ETH_RX_DESC *p_rx_used_desc_q[MAX_RX_QUEUE_NUM];
+
+ /* Next available Tx resource */
+ volatile ETH_TX_DESC *p_tx_curr_desc_q[MAX_TX_QUEUE_NUM];
+ /* Returning Tx resource */
+ volatile ETH_TX_DESC *p_tx_used_desc_q[MAX_TX_QUEUE_NUM];
+ /* An extra Tx index to support transmit of multiple buffers per packet */
+ volatile ETH_TX_DESC *p_tx_first_desc_q[MAX_TX_QUEUE_NUM];
+
+ /* Tx/Rx rings size and base variables fields. For driver use */
+
+ volatile ETH_RX_DESC *p_rx_desc_area_base[MAX_RX_QUEUE_NUM];
+ unsigned int rx_desc_area_size[MAX_RX_QUEUE_NUM];
+ char *p_rx_buffer_base[MAX_RX_QUEUE_NUM];
+
+ volatile ETH_TX_DESC *p_tx_desc_area_base[MAX_TX_QUEUE_NUM];
+ unsigned int tx_desc_area_size[MAX_TX_QUEUE_NUM];
+ char *p_tx_buffer_base[MAX_TX_QUEUE_NUM];
+
+} ETH_PORT_INFO;
+
+
+/* ethernet.h API list */
+
+/* Port operation control routines */
+static void eth_port_init (ETH_PORT_INFO *p_eth_port_ctrl);
+static void eth_port_reset(ETH_PORT eth_port_num);
+static bool eth_port_start(ETH_PORT_INFO *p_eth_port_ctrl);
+
+
+/* Port MAC address routines */
+static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
+ unsigned char *p_addr,
+ ETH_QUEUE queue);
+#if 0 /* FIXME */
+static void eth_port_mc_addr (ETH_PORT eth_port_num,
+ unsigned char *p_addr,
+ ETH_QUEUE queue,
+ int option);
+#endif
+
+/* PHY and MIB routines */
+static bool ethernet_phy_reset(ETH_PORT eth_port_num);
+
+static bool eth_port_write_smi_reg(ETH_PORT eth_port_num,
+ unsigned int phy_reg,
+ unsigned int value);
+
+static bool eth_port_read_smi_reg(ETH_PORT eth_port_num,
+ unsigned int phy_reg,
+ unsigned int* value);
+
+static void eth_clear_mib_counters(ETH_PORT eth_port_num);
+
+/* Port data flow control routines */
+static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_tx_return_desc(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO *p_pkt_info);
+static ETH_FUNC_RET_STATUS eth_rx_return_buff(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ PKT_INFO *p_pkt_info);
+
+
+static bool ether_init_tx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE tx_queue,
+ int tx_desc_num,
+ int tx_buff_size,
+ unsigned int tx_desc_base_addr,
+ unsigned int tx_buff_base_addr);
+
+static bool ether_init_rx_desc_ring(ETH_PORT_INFO *p_eth_port_ctrl,
+ ETH_QUEUE rx_queue,
+ int rx_desc_num,
+ int rx_buff_size,
+ unsigned int rx_desc_base_addr,
+ unsigned int rx_buff_base_addr);
+
+#endif /* MV64360_ETH_ */
diff --git a/board/esd/cpci750/mv_regs.h b/board/esd/cpci750/mv_regs.h
new file mode 100644
index 0000000..0d6370b
--- /dev/null
+++ b/board/esd/cpci750/mv_regs.h
@@ -0,0 +1,1124 @@
+/*
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/********************************************************************************
+* gt64360r.h - GT-64360 Internal registers definition file.
+*
+* DESCRIPTION:
+* None.
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+#ifndef __INCmv_regsh
+#define __INCmv_regsh
+
+#define MV64360
+
+/* Supported by the Atlantis */
+#define MV64360_INCLUDE_PCI_1
+#define MV64360_INCLUDE_PCI_0_ARBITER
+#define MV64360_INCLUDE_PCI_1_ARBITER
+#define MV64360_INCLUDE_SNOOP_SUPPORT
+#define MV64360_INCLUDE_P2P
+#define MV64360_INCLUDE_ETH_PORT_2
+#define MV64360_INCLUDE_CPU_MAPPING
+#define MV64360_INCLUDE_MPSC
+
+/* Not supported features */
+#undef INCLUDE_CNTMR_4_7
+#undef INCLUDE_DMA_4_7
+
+/****************************************/
+/* Processor Address Space */
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64360_CS_0_BASE_ADDR 0x008
+#define MV64360_CS_0_SIZE 0x010
+#define MV64360_CS_1_BASE_ADDR 0x208
+#define MV64360_CS_1_SIZE 0x210
+#define MV64360_CS_2_BASE_ADDR 0x018
+#define MV64360_CS_2_SIZE 0x020
+#define MV64360_CS_3_BASE_ADDR 0x218
+#define MV64360_CS_3_SIZE 0x220
+
+/* Devices BAR and size registers */
+
+#define MV64360_DEV_CS0_BASE_ADDR 0x028
+#define MV64360_DEV_CS0_SIZE 0x030
+#define MV64360_DEV_CS1_BASE_ADDR 0x228
+#define MV64360_DEV_CS1_SIZE 0x230
+#define MV64360_DEV_CS2_BASE_ADDR 0x248
+#define MV64360_DEV_CS2_SIZE 0x250
+#define MV64360_DEV_CS3_BASE_ADDR 0x038
+#define MV64360_DEV_CS3_SIZE 0x040
+#define MV64360_BOOTCS_BASE_ADDR 0x238
+#define MV64360_BOOTCS_SIZE 0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64360_PCI_0_IO_BASE_ADDR 0x048
+#define MV64360_PCI_0_IO_SIZE 0x050
+#define MV64360_PCI_0_MEMORY0_BASE_ADDR 0x058
+#define MV64360_PCI_0_MEMORY0_SIZE 0x060
+#define MV64360_PCI_0_MEMORY1_BASE_ADDR 0x080
+#define MV64360_PCI_0_MEMORY1_SIZE 0x088
+#define MV64360_PCI_0_MEMORY2_BASE_ADDR 0x258
+#define MV64360_PCI_0_MEMORY2_SIZE 0x260
+#define MV64360_PCI_0_MEMORY3_BASE_ADDR 0x280
+#define MV64360_PCI_0_MEMORY3_SIZE 0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64360_PCI_1_IO_BASE_ADDR 0x090
+#define MV64360_PCI_1_IO_SIZE 0x098
+#define MV64360_PCI_1_MEMORY0_BASE_ADDR 0x0a0
+#define MV64360_PCI_1_MEMORY0_SIZE 0x0a8
+#define MV64360_PCI_1_MEMORY1_BASE_ADDR 0x0b0
+#define MV64360_PCI_1_MEMORY1_SIZE 0x0b8
+#define MV64360_PCI_1_MEMORY2_BASE_ADDR 0x2a0
+#define MV64360_PCI_1_MEMORY2_SIZE 0x2a8
+#define MV64360_PCI_1_MEMORY3_BASE_ADDR 0x2b0
+#define MV64360_PCI_1_MEMORY3_SIZE 0x2b8
+
+/* SRAM base address */
+#define MV64360_INTEGRATED_SRAM_BASE_ADDR 0x268
+
+/* internal registers space base address */
+#define MV64360_INTERNAL_SPACE_BASE_ADDR 0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+ windows above */
+#define MV64360_BASE_ADDR_ENABLE 0x278
+
+/****************************************/
+/* PCI remap registers */
+/****************************************/
+ /* PCI 0 */
+#define MV64360_PCI_0_IO_ADDR_REMAP 0x0f0
+#define MV64360_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8
+#define MV64360_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320
+#define MV64360_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100
+#define MV64360_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328
+#define MV64360_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8
+#define MV64360_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330
+#define MV64360_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300
+#define MV64360_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338
+ /* PCI 1 */
+#define MV64360_PCI_1_IO_ADDR_REMAP 0x108
+#define MV64360_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110
+#define MV64360_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340
+#define MV64360_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118
+#define MV64360_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348
+#define MV64360_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310
+#define MV64360_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350
+#define MV64360_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318
+#define MV64360_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358
+
+#define MV64360_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0
+#define MV64360_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8
+#define MV64360_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0
+#define MV64360_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8
+#define MV64360_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0
+#define MV64360_CPU_GE_HEADERS_RETARGET_BASE 0x3d8
+#define MV64360_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0
+#define MV64360_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8
+
+/****************************************/
+/* CPU Control Registers */
+/****************************************/
+
+#define MV64360_CPU_CONFIG 0x000
+#define MV64360_CPU_MODE 0x120
+#define MV64360_CPU_MASTER_CONTROL 0x160
+#define MV64360_CPU_CROSS_BAR_CONTROL_LOW 0x150
+#define MV64360_CPU_CROSS_BAR_CONTROL_HIGH 0x158
+#define MV64360_CPU_CROSS_BAR_TIMEOUT 0x168
+
+/****************************************/
+/* SMP RegisterS */
+/****************************************/
+
+#define MV64360_SMP_WHO_AM_I 0x200
+#define MV64360_SMP_CPU0_DOORBELL 0x214
+#define MV64360_SMP_CPU0_DOORBELL_CLEAR 0x21C
+#define MV64360_SMP_CPU1_DOORBELL 0x224
+#define MV64360_SMP_CPU1_DOORBELL_CLEAR 0x22C
+#define MV64360_SMP_CPU0_DOORBELL_MASK 0x234
+#define MV64360_SMP_CPU1_DOORBELL_MASK 0x23C
+#define MV64360_SMP_SEMAPHOR0 0x244
+#define MV64360_SMP_SEMAPHOR1 0x24c
+#define MV64360_SMP_SEMAPHOR2 0x254
+#define MV64360_SMP_SEMAPHOR3 0x25c
+#define MV64360_SMP_SEMAPHOR4 0x264
+#define MV64360_SMP_SEMAPHOR5 0x26c
+#define MV64360_SMP_SEMAPHOR6 0x274
+#define MV64360_SMP_SEMAPHOR7 0x27c
+
+/****************************************/
+/* CPU Sync Barrier Register */
+/****************************************/
+
+#define MV64360_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0
+#define MV64360_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8
+#define MV64360_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0
+#define MV64360_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8
+
+/****************************************/
+/* CPU Access Protect */
+/****************************************/
+
+#define MV64360_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180
+#define MV64360_CPU_PROTECT_WINDOW_0_SIZE 0x188
+#define MV64360_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190
+#define MV64360_CPU_PROTECT_WINDOW_1_SIZE 0x198
+#define MV64360_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0
+#define MV64360_CPU_PROTECT_WINDOW_2_SIZE 0x1a8
+#define MV64360_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0
+#define MV64360_CPU_PROTECT_WINDOW_3_SIZE 0x1b8
+
+
+/****************************************/
+/* CPU Error Report */
+/****************************************/
+
+#define MV64360_CPU_ERROR_ADDR_LOW 0x070
+#define MV64360_CPU_ERROR_ADDR_HIGH 0x078
+#define MV64360_CPU_ERROR_DATA_LOW 0x128
+#define MV64360_CPU_ERROR_DATA_HIGH 0x130
+#define MV64360_CPU_ERROR_PARITY 0x138
+#define MV64360_CPU_ERROR_CAUSE 0x140
+#define MV64360_CPU_ERROR_MASK 0x148
+
+/****************************************/
+/* CPU Interface Debug Registers */
+/****************************************/
+
+#define MV64360_PUNIT_SLAVE_DEBUG_LOW 0x360
+#define MV64360_PUNIT_SLAVE_DEBUG_HIGH 0x368
+#define MV64360_PUNIT_MASTER_DEBUG_LOW 0x370
+#define MV64360_PUNIT_MASTER_DEBUG_HIGH 0x378
+#define MV64360_PUNIT_MMASK 0x3e4
+
+/****************************************/
+/* Integrated SRAM Registers */
+/****************************************/
+
+#define MV64360_SRAM_CONFIG 0x380
+#define MV64360_SRAM_TEST_MODE 0X3F4
+#define MV64360_SRAM_ERROR_CAUSE 0x388
+#define MV64360_SRAM_ERROR_ADDR 0x390
+#define MV64360_SRAM_ERROR_ADDR_HIGH 0X3F8
+#define MV64360_SRAM_ERROR_DATA_LOW 0x398
+#define MV64360_SRAM_ERROR_DATA_HIGH 0x3a0
+#define MV64360_SRAM_ERROR_DATA_PARITY 0x3a8
+
+/****************************************/
+/* SDRAM Configuration */
+/****************************************/
+
+#define MV64360_SDRAM_CONFIG 0x1400
+#define MV64360_D_UNIT_CONTROL_LOW 0x1404
+#define MV64360_D_UNIT_CONTROL_HIGH 0x1424
+#define MV64360_SDRAM_TIMING_CONTROL_LOW 0x1408
+#define MV64360_SDRAM_TIMING_CONTROL_HIGH 0x140c
+#define MV64360_SDRAM_ADDR_CONTROL 0x1410
+#define MV64360_SDRAM_OPEN_PAGES_CONTROL 0x1414
+#define MV64360_SDRAM_OPERATION 0x1418
+#define MV64360_SDRAM_MODE 0x141c
+#define MV64360_EXTENDED_DRAM_MODE 0x1420
+#define MV64360_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430
+#define MV64360_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434
+#define MV64360_SDRAM_CROSS_BAR_TIMEOUT 0x1438
+#define MV64360_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0
+#define MV64360_SDRAM_DATA_PADS_CALIBRATION 0x14c4
+
+/****************************************/
+/* SDRAM Error Report */
+/****************************************/
+
+#define MV64360_SDRAM_ERROR_DATA_LOW 0x1444
+#define MV64360_SDRAM_ERROR_DATA_HIGH 0x1440
+#define MV64360_SDRAM_ERROR_ADDR 0x1450
+#define MV64360_SDRAM_RECEIVED_ECC 0x1448
+#define MV64360_SDRAM_CALCULATED_ECC 0x144c
+#define MV64360_SDRAM_ECC_CONTROL 0x1454
+#define MV64360_SDRAM_ECC_ERROR_COUNTER 0x1458
+
+/******************************************/
+/* Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64360_DFCDL_CONFIG0 0x1480
+#define MV64360_DFCDL_CONFIG1 0x1484
+#define MV64360_DLL_WRITE 0x1488
+#define MV64360_DLL_READ 0x148c
+#define MV64360_SRAM_ADDR 0x1490
+#define MV64360_SRAM_DATA0 0x1494
+#define MV64360_SRAM_DATA1 0x1498
+#define MV64360_SRAM_DATA2 0x149c
+#define MV64360_DFCL_PROBE 0x14a0
+
+/******************************************/
+/* Debug Registers */
+/******************************************/
+
+#define MV64360_DUNIT_DEBUG_LOW 0x1460
+#define MV64360_DUNIT_DEBUG_HIGH 0x1464
+#define MV64360_DUNIT_MMASK 0X1b40
+
+/****************************************/
+/* Device Parameters */
+/****************************************/
+
+#define MV64360_DEVICE_BANK0_PARAMETERS 0x45c
+#define MV64360_DEVICE_BANK1_PARAMETERS 0x460
+#define MV64360_DEVICE_BANK2_PARAMETERS 0x464
+#define MV64360_DEVICE_BANK3_PARAMETERS 0x468
+#define MV64360_DEVICE_BOOT_BANK_PARAMETERS 0x46c
+#define MV64360_DEVICE_INTERFACE_CONTROL 0x4c0
+#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8
+#define MV64360_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc
+#define MV64360_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4
+
+/****************************************/
+/* Device interrupt registers */
+/****************************************/
+
+#define MV64360_DEVICE_INTERRUPT_CAUSE 0x4d0
+#define MV64360_DEVICE_INTERRUPT_MASK 0x4d4
+#define MV64360_DEVICE_ERROR_ADDR 0x4d8
+#define MV64360_DEVICE_ERROR_DATA 0x4dc
+#define MV64360_DEVICE_ERROR_PARITY 0x4e0
+
+/****************************************/
+/* Device debug registers */
+/****************************************/
+
+#define MV64360_DEVICE_DEBUG_LOW 0x4e4
+#define MV64360_DEVICE_DEBUG_HIGH 0x4e8
+#define MV64360_RUNIT_MMASK 0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64360_PCI_0_CS_0_BANK_SIZE 0xc08
+#define MV64360_PCI_1_CS_0_BANK_SIZE 0xc88
+#define MV64360_PCI_0_CS_1_BANK_SIZE 0xd08
+#define MV64360_PCI_1_CS_1_BANK_SIZE 0xd88
+#define MV64360_PCI_0_CS_2_BANK_SIZE 0xc0c
+#define MV64360_PCI_1_CS_2_BANK_SIZE 0xc8c
+#define MV64360_PCI_0_CS_3_BANK_SIZE 0xd0c
+#define MV64360_PCI_1_CS_3_BANK_SIZE 0xd8c
+#define MV64360_PCI_0_DEVCS_0_BANK_SIZE 0xc10
+#define MV64360_PCI_1_DEVCS_0_BANK_SIZE 0xc90
+#define MV64360_PCI_0_DEVCS_1_BANK_SIZE 0xd10
+#define MV64360_PCI_1_DEVCS_1_BANK_SIZE 0xd90
+#define MV64360_PCI_0_DEVCS_2_BANK_SIZE 0xd18
+#define MV64360_PCI_1_DEVCS_2_BANK_SIZE 0xd98
+#define MV64360_PCI_0_DEVCS_3_BANK_SIZE 0xc14
+#define MV64360_PCI_1_DEVCS_3_BANK_SIZE 0xc94
+#define MV64360_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14
+#define MV64360_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94
+#define MV64360_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c
+#define MV64360_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c
+#define MV64360_PCI_0_P2P_MEM1_BAR_SIZE 0xd20
+#define MV64360_PCI_1_P2P_MEM1_BAR_SIZE 0xda0
+#define MV64360_PCI_0_P2P_I_O_BAR_SIZE 0xd24
+#define MV64360_PCI_1_P2P_I_O_BAR_SIZE 0xda4
+#define MV64360_PCI_0_CPU_BAR_SIZE 0xd28
+#define MV64360_PCI_1_CPU_BAR_SIZE 0xda8
+#define MV64360_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00
+#define MV64360_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80
+#define MV64360_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c
+#define MV64360_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c
+#define MV64360_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c
+#define MV64360_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc
+#define MV64360_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48
+#define MV64360_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8
+#define MV64360_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48
+#define MV64360_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8
+#define MV64360_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c
+#define MV64360_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc
+#define MV64360_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c
+#define MV64360_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc
+#define MV64360_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04
+#define MV64360_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84
+#define MV64360_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08
+#define MV64360_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88
+#define MV64360_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C
+#define MV64360_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C
+#define MV64360_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10
+#define MV64360_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90
+#define MV64360_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50
+#define MV64360_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0
+#define MV64360_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50
+#define MV64360_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0
+#define MV64360_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58
+#define MV64360_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8
+#define MV64360_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54
+#define MV64360_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4
+#define MV64360_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54
+#define MV64360_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4
+#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c
+#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc
+#define MV64360_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60
+#define MV64360_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0
+#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64
+#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4
+#define MV64360_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68
+#define MV64360_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8
+#define MV64360_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c
+#define MV64360_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec
+#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70
+#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0
+#define MV64360_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74
+#define MV64360_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4
+#define MV64360_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00
+#define MV64360_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80
+#define MV64360_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38
+#define MV64360_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8
+#define MV64360_PCI_0_ADDR_DECODE_CONTROL 0xd3c
+#define MV64360_PCI_1_ADDR_DECODE_CONTROL 0xdbc
+#define MV64360_PCI_0_HEADERS_RETARGET_CONTROL 0xF40
+#define MV64360_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0
+#define MV64360_PCI_0_HEADERS_RETARGET_BASE 0xF44
+#define MV64360_PCI_1_HEADERS_RETARGET_BASE 0xFc4
+#define MV64360_PCI_0_HEADERS_RETARGET_HIGH 0xF48
+#define MV64360_PCI_1_HEADERS_RETARGET_HIGH 0xFc8
+
+/***********************************/
+/* PCI Control Register Map */
+/***********************************/
+
+#define MV64360_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20
+#define MV64360_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0
+#define MV64360_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C
+#define MV64360_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C
+#define MV64360_PCI_0_COMMAND 0xc00
+#define MV64360_PCI_1_COMMAND 0xc80
+#define MV64360_PCI_0_MODE 0xd00
+#define MV64360_PCI_1_MODE 0xd80
+#define MV64360_PCI_0_RETRY 0xc04
+#define MV64360_PCI_1_RETRY 0xc84
+#define MV64360_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04
+#define MV64360_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84
+#define MV64360_PCI_0_MSI_TRIGGER_TIMER 0xc38
+#define MV64360_PCI_1_MSI_TRIGGER_TIMER 0xcb8
+#define MV64360_PCI_0_ARBITER_CONTROL 0x1d00
+#define MV64360_PCI_1_ARBITER_CONTROL 0x1d80
+#define MV64360_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08
+#define MV64360_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88
+#define MV64360_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c
+#define MV64360_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c
+#define MV64360_PCI_0_CROSS_BAR_TIMEOUT 0x1d04
+#define MV64360_PCI_1_CROSS_BAR_TIMEOUT 0x1d84
+#define MV64360_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18
+#define MV64360_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98
+#define MV64360_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10
+#define MV64360_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90
+#define MV64360_PCI_0_P2P_CONFIG 0x1d14
+#define MV64360_PCI_1_P2P_CONFIG 0x1d94
+
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50
+#define MV64360_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54
+#define MV64360_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58
+
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0
+#define MV64360_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
+#define MV64360_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8
+
+/****************************************/
+/* PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64360_PCI_0_CONFIG_ADDR 0xcf8
+#define MV64360_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc
+#define MV64360_PCI_1_CONFIG_ADDR 0xc78
+#define MV64360_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c
+#define MV64360_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34
+#define MV64360_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4
+
+/****************************************/
+/* PCI Error Report Registers */
+/****************************************/
+
+#define MV64360_PCI_0_SERR_MASK 0xc28
+#define MV64360_PCI_1_SERR_MASK 0xca8
+#define MV64360_PCI_0_ERROR_ADDR_LOW 0x1d40
+#define MV64360_PCI_1_ERROR_ADDR_LOW 0x1dc0
+#define MV64360_PCI_0_ERROR_ADDR_HIGH 0x1d44
+#define MV64360_PCI_1_ERROR_ADDR_HIGH 0x1dc4
+#define MV64360_PCI_0_ERROR_ATTRIBUTE 0x1d48
+#define MV64360_PCI_1_ERROR_ATTRIBUTE 0x1dc8
+#define MV64360_PCI_0_ERROR_COMMAND 0x1d50
+#define MV64360_PCI_1_ERROR_COMMAND 0x1dd0
+#define MV64360_PCI_0_ERROR_CAUSE 0x1d58
+#define MV64360_PCI_1_ERROR_CAUSE 0x1dd8
+#define MV64360_PCI_0_ERROR_MASK 0x1d5c
+#define MV64360_PCI_1_ERROR_MASK 0x1ddc
+
+/****************************************/
+/* PCI Debug Registers */
+/****************************************/
+
+#define MV64360_PCI_0_MMASK 0X1D24
+#define MV64360_PCI_1_MMASK 0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers */
+/*********************************************/
+
+#define MV64360_PCI_DEVICE_AND_VENDOR_ID 0x000
+#define MV64360_PCI_STATUS_AND_COMMAND 0x004
+#define MV64360_PCI_CLASS_CODE_AND_REVISION_ID 0x008
+#define MV64360_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
+
+#define MV64360_PCI_SCS_0_BASE_ADDR_LOW 0x010
+#define MV64360_PCI_SCS_0_BASE_ADDR_HIGH 0x014
+#define MV64360_PCI_SCS_1_BASE_ADDR_LOW 0x018
+#define MV64360_PCI_SCS_1_BASE_ADDR_HIGH 0x01C
+#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020
+#define MV64360_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024
+#define MV64360_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c
+#define MV64360_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030
+#define MV64360_PCI_CAPABILTY_LIST_POINTER 0x034
+#define MV64360_PCI_INTERRUPT_PIN_AND_LINE 0x03C
+ /* capability list */
+#define MV64360_PCI_POWER_MANAGEMENT_CAPABILITY 0x040
+#define MV64360_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
+#define MV64360_PCI_VPD_ADDR 0x048
+#define MV64360_PCI_VPD_DATA 0x04c
+#define MV64360_PCI_MSI_MESSAGE_CONTROL 0x050
+#define MV64360_PCI_MSI_MESSAGE_ADDR 0x054
+#define MV64360_PCI_MSI_MESSAGE_UPPER_ADDR 0x058
+#define MV64360_PCI_MSI_MESSAGE_DATA 0x05c
+#define MV64360_PCI_X_COMMAND 0x060
+#define MV64360_PCI_X_STATUS 0x064
+#define MV64360_PCI_COMPACT_PCI_HOT_SWAP 0x068
+
+/***********************************************/
+/* PCI Configuration, Function 1, Registers */
+/***********************************************/
+
+#define MV64360_PCI_SCS_2_BASE_ADDR_LOW 0x110
+#define MV64360_PCI_SCS_2_BASE_ADDR_HIGH 0x114
+#define MV64360_PCI_SCS_3_BASE_ADDR_LOW 0x118
+#define MV64360_PCI_SCS_3_BASE_ADDR_HIGH 0x11c
+#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120
+#define MV64360_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124
+
+/***********************************************/
+/* PCI Configuration, Function 2, Registers */
+/***********************************************/
+
+#define MV64360_PCI_DEVCS_0_BASE_ADDR_LOW 0x210
+#define MV64360_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214
+#define MV64360_PCI_DEVCS_1_BASE_ADDR_LOW 0x218
+#define MV64360_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c
+#define MV64360_PCI_DEVCS_2_BASE_ADDR_LOW 0x220
+#define MV64360_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224
+
+/***********************************************/
+/* PCI Configuration, Function 3, Registers */
+/***********************************************/
+
+#define MV64360_PCI_DEVCS_3_BASE_ADDR_LOW 0x310
+#define MV64360_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314
+#define MV64360_PCI_BOOT_CS_BASE_ADDR_LOW 0x318
+#define MV64360_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c
+#define MV64360_PCI_CPU_BASE_ADDR_LOW 0x220
+#define MV64360_PCI_CPU_BASE_ADDR_HIGH 0x224
+
+/***********************************************/
+/* PCI Configuration, Function 4, Registers */
+/***********************************************/
+
+#define MV64360_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410
+#define MV64360_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414
+#define MV64360_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418
+#define MV64360_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c
+#define MV64360_PCI_P2P_I_O_BASE_ADDR 0x420
+#define MV64360_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20) */
+/****************************************/
+
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044
+#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC
+
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4
+#define MV64360_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C
+
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44
+#define MV64360_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC
+#define MV64360_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90
+#define MV64360_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98
+#define MV64360_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C
+#define MV64360_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0
+#define MV64360_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4
+#define MV64360_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8
+#define MV64360_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC
+#define MV64360_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0
+#define MV64360_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4
+#define MV64360_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0
+#define MV64360_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4
+#define MV64360_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0
+#define MV64360_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4
+#define MV64360_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0
+#define MV64360_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4
+#define MV64360_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8
+#define MV64360_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC
+#define MV64360_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0
+#define MV64360_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4
+#define MV64360_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78
+#define MV64360_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C
+
+/****************************************/
+/* Ethernet Unit Registers */
+/****************************************/
+
+#define MV64360_ETH_PHY_ADDR_REG 0x2000
+#define MV64360_ETH_SMI_REG 0x2004
+#define MV64360_ETH_UNIT_DEFAULT_ADDR_REG 0x2008
+#define MV64360_ETH_UNIT_DEFAULTID_REG 0x200c
+#define MV64360_ETH_UNIT_INTERRUPT_CAUSE_REG 0x2080
+#define MV64360_ETH_UNIT_INTERRUPT_MASK_REG 0x2084
+#define MV64360_ETH_UNIT_INTERNAL_USE_REG 0x24fc
+#define MV64360_ETH_UNIT_ERROR_ADDR_REG 0x2094
+#define MV64360_ETH_BAR_0 0x2200
+#define MV64360_ETH_BAR_1 0x2208
+#define MV64360_ETH_BAR_2 0x2210
+#define MV64360_ETH_BAR_3 0x2218
+#define MV64360_ETH_BAR_4 0x2220
+#define MV64360_ETH_BAR_5 0x2228
+#define MV64360_ETH_SIZE_REG_0 0x2204
+#define MV64360_ETH_SIZE_REG_1 0x220c
+#define MV64360_ETH_SIZE_REG_2 0x2214
+#define MV64360_ETH_SIZE_REG_3 0x221c
+#define MV64360_ETH_SIZE_REG_4 0x2224
+#define MV64360_ETH_SIZE_REG_5 0x222c
+#define MV64360_ETH_HEADERS_RETARGET_BASE_REG 0x2230
+#define MV64360_ETH_HEADERS_RETARGET_CONTROL_REG 0x2234
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_0 0x2280
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_1 0x2284
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_2 0x2288
+#define MV64360_ETH_HIGH_ADDR_REMAP_REG_3 0x228c
+#define MV64360_ETH_BASE_ADDR_ENABLE_REG 0x2290
+#define MV64360_ETH_ACCESS_PROTECTION_REG(port) (0x2294 + (port<<2))
+#define MV64360_ETH_MIB_COUNTERS_BASE(port) (0x3000 + (port<<7))
+#define MV64360_ETH_PORT_CONFIG_REG(port) (0x2400 + (port<<10))
+#define MV64360_ETH_PORT_CONFIG_EXTEND_REG(port) (0x2404 + (port<<10))
+#define MV64360_ETH_MII_SERIAL_PARAMETRS_REG(port) (0x2408 + (port<<10))
+#define MV64360_ETH_GMII_SERIAL_PARAMETRS_REG(port) (0x240c + (port<<10))
+#define MV64360_ETH_VLAN_ETHERTYPE_REG(port) (0x2410 + (port<<10))
+#define MV64360_ETH_MAC_ADDR_LOW(port) (0x2414 + (port<<10))
+#define MV64360_ETH_MAC_ADDR_HIGH(port) (0x2418 + (port<<10))
+#define MV64360_ETH_SDMA_CONFIG_REG(port) (0x241c + (port<<10))
+#define MV64360_ETH_DSCP_0(port) (0x2420 + (port<<10))
+#define MV64360_ETH_DSCP_1(port) (0x2424 + (port<<10))
+#define MV64360_ETH_DSCP_2(port) (0x2428 + (port<<10))
+#define MV64360_ETH_DSCP_3(port) (0x242c + (port<<10))
+#define MV64360_ETH_DSCP_4(port) (0x2430 + (port<<10))
+#define MV64360_ETH_DSCP_5(port) (0x2434 + (port<<10))
+#define MV64360_ETH_DSCP_6(port) (0x2438 + (port<<10))
+#define MV64360_ETH_PORT_SERIAL_CONTROL_REG(port) (0x243c + (port<<10))
+#define MV64360_ETH_VLAN_PRIORITY_TAG_TO_PRIORITY(port) (0x2440 + (port<<10))
+#define MV64360_ETH_PORT_STATUS_REG(port) (0x2444 + (port<<10))
+#define MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(port) (0x2448 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_FIXED_PRIORITY(port) (0x244c + (port<<10))
+#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_RATE_CONFIG(port) (0x2450 + (port<<10))
+#define MV64360_ETH_MAXIMUM_TRANSMIT_UNIT(port) (0x2458 + (port<<10))
+#define MV64360_ETH_PORT_MAXIMUM_TOKEN_BUCKET_SIZE(port) (0x245c + (port<<10))
+#define MV64360_ETH_INTERRUPT_CAUSE_REG(port) (0x2460 + (port<<10))
+#define MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG(port) (0x2464 + (port<<10))
+#define MV64360_ETH_INTERRUPT_MASK_REG(port) (0x2468 + (port<<10))
+#define MV64360_ETH_INTERRUPT_EXTEND_MASK_REG(port) (0x246c + (port<<10))
+#define MV64360_ETH_RX_FIFO_URGENT_THRESHOLD_REG(port) (0x2470 + (port<<10))
+#define MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG(port) (0x2474 + (port<<10))
+#define MV64360_ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (0x247c + (port<<10))
+#define MV64360_ETH_RX_DISCARDED_FRAMES_COUNTER(port) (0x2484 + (port<<10)
+#define MV64360_ETH_PORT_DEBUG_0_REG(port) (0x248c + (port<<10))
+#define MV64360_ETH_PORT_DEBUG_1_REG(port) (0x2490 + (port<<10))
+#define MV64360_ETH_PORT_INTERNAL_ADDR_ERROR_REG(port) (0x2494 + (port<<10))
+#define MV64360_ETH_INTERNAL_USE_REG(port) (0x24fc + (port<<10))
+#define MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(port) (0x2680 + (port<<10))
+#define MV64360_ETH_CURRENT_SERVED_TX_DESC_PTR(port) (0x2684 + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port) (0x260c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port) (0x261c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port) (0x262c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port) (0x263c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port) (0x264c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port) (0x265c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port) (0x266c + (port<<10))
+#define MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port) (0x267c + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port) (0x26c0 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_1(port) (0x26c4 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_2(port) (0x26c8 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_3(port) (0x26cc + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_4(port) (0x26d0 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_5(port) (0x26d4 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_6(port) (0x26d8 + (port<<10))
+#define MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_7(port) (0x26dc + (port<<10))
+#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT(port) (0x2700 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_COUNT(port) (0x2710 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_COUNT(port) (0x2720 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_COUNT(port) (0x2730 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_COUNT(port) (0x2740 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_COUNT(port) (0x2750 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_COUNT(port) (0x2760 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_COUNT(port) (0x2770 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG(port) (0x2704 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_1_TOKEN_BUCKET_CONFIG(port) (0x2714 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_2_TOKEN_BUCKET_CONFIG(port) (0x2724 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_3_TOKEN_BUCKET_CONFIG(port) (0x2734 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_4_TOKEN_BUCKET_CONFIG(port) (0x2744 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_5_TOKEN_BUCKET_CONFIG(port) (0x2754 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_6_TOKEN_BUCKET_CONFIG(port) (0x2764 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_7_TOKEN_BUCKET_CONFIG(port) (0x2774 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_0_ARBITER_CONFIG(port) (0x2708 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_1_ARBITER_CONFIG(port) (0x2718 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_2_ARBITER_CONFIG(port) (0x2728 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_3_ARBITER_CONFIG(port) (0x2738 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_4_ARBITER_CONFIG(port) (0x2748 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_5_ARBITER_CONFIG(port) (0x2758 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_6_ARBITER_CONFIG(port) (0x2768 + (port<<10))
+#define MV64360_ETH_TX_QUEUE_7_ARBITER_CONFIG(port) (0x2778 + (port<<10))
+#define MV64360_ETH_PORT_TX_TOKEN_BUCKET_COUNT(port) (0x2780 + (port<<10))
+#define MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port) (0x3400 + (port<<10))
+#define MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port) (0x3500 + (port<<10))
+#define MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE(port) (0x3600 + (port<<10))
+
+/*******************************************/
+/* CUNIT Registers */
+/*******************************************/
+
+ /* Address Decoding Register Map */
+
+#define MV64360_CUNIT_BASE_ADDR_REG0 0xf200
+#define MV64360_CUNIT_BASE_ADDR_REG1 0xf208
+#define MV64360_CUNIT_BASE_ADDR_REG2 0xf210
+#define MV64360_CUNIT_BASE_ADDR_REG3 0xf218
+#define MV64360_CUNIT_SIZE0 0xf204
+#define MV64360_CUNIT_SIZE1 0xf20c
+#define MV64360_CUNIT_SIZE2 0xf214
+#define MV64360_CUNIT_SIZE3 0xf21c
+#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240
+#define MV64360_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244
+#define MV64360_CUNIT_BASE_ADDR_ENABLE_REG 0xf250
+#define MV64360_MPSC0_ACCESS_PROTECTION_REG 0xf254
+#define MV64360_MPSC1_ACCESS_PROTECTION_REG 0xf258
+#define MV64360_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C
+
+ /* Error Report Registers */
+
+#define MV64360_CUNIT_INTERRUPT_CAUSE_REG 0xf310
+#define MV64360_CUNIT_INTERRUPT_MASK_REG 0xf314
+#define MV64360_CUNIT_ERROR_ADDR 0xf318
+
+ /* Cunit Control Registers */
+
+#define MV64360_CUNIT_ARBITER_CONTROL_REG 0xf300
+#define MV64360_CUNIT_CONFIG_REG 0xb40c
+#define MV64360_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304
+
+ /* Cunit Debug Registers */
+
+#define MV64360_CUNIT_DEBUG_LOW 0xf340
+#define MV64360_CUNIT_DEBUG_HIGH 0xf344
+#define MV64360_CUNIT_MMASK 0xf380
+
+ /* Cunit Base Address Enable Window Bits*/
+#define MV64360_CUNIT_BASE_ADDR_WIN_0_BIT 0x0
+#define MV64360_CUNIT_BASE_ADDR_WIN_1_BIT 0x1
+#define MV64360_CUNIT_BASE_ADDR_WIN_2_BIT 0x2
+#define MV64360_CUNIT_BASE_ADDR_WIN_3_BIT 0x3
+
+ /* MPSCs Clocks Routing Registers */
+
+#define MV64360_MPSC_ROUTING_REG 0xb400
+#define MV64360_MPSC_RX_CLOCK_ROUTING_REG 0xb404
+#define MV64360_MPSC_TX_CLOCK_ROUTING_REG 0xb408
+
+ /* MPSCs Interrupts Registers */
+
+#define MV64360_MPSC_CAUSE_REG(port) (0xb804 + (port<<3))
+#define MV64360_MPSC_MASK_REG(port) (0xb884 + (port<<3))
+
+#define MV64360_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12))
+#define MV64360_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12))
+#define MV64360_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12))
+#define MV64360_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12))
+
+ /* MPSC0 Registers */
+
+
+/***************************************/
+/* SDMA Registers */
+/***************************************/
+
+#define MV64360_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13))
+#define MV64360_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13))
+#define MV64360_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13))
+#define MV64360_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13))
+#define MV64360_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13))
+
+#define MV64360_SDMA_CAUSE_REG 0xb800
+#define MV64360_SDMA_MASK_REG 0xb880
+
+
+/****************************************/
+/* SDMA Address Space Targets */
+/****************************************/
+
+#define MV64360_SDMA_DRAM_CS_0_TARGET 0x0e00
+#define MV64360_SDMA_DRAM_CS_1_TARGET 0x0d00
+#define MV64360_SDMA_DRAM_CS_2_TARGET 0x0b00
+#define MV64360_SDMA_DRAM_CS_3_TARGET 0x0700
+
+#define MV64360_SDMA_DEV_CS_0_TARGET 0x1e01
+#define MV64360_SDMA_DEV_CS_1_TARGET 0x1d01
+#define MV64360_SDMA_DEV_CS_2_TARGET 0x1b01
+#define MV64360_SDMA_DEV_CS_3_TARGET 0x1701
+
+#define MV64360_SDMA_BOOT_CS_TARGET 0x0f00
+
+#define MV64360_SDMA_SRAM_TARGET 0x0003
+#define MV64360_SDMA_60X_BUS_TARGET 0x4003
+
+#define MV64360_PCI_0_TARGET 0x0003
+#define MV64360_PCI_1_TARGET 0x0004
+
+
+/* Devices BAR and size registers */
+
+#define MV64360_DEV_CS0_BASE_ADDR 0x028
+#define MV64360_DEV_CS0_SIZE 0x030
+#define MV64360_DEV_CS1_BASE_ADDR 0x228
+#define MV64360_DEV_CS1_SIZE 0x230
+#define MV64360_DEV_CS2_BASE_ADDR 0x248
+#define MV64360_DEV_CS2_SIZE 0x250
+#define MV64360_DEV_CS3_BASE_ADDR 0x038
+#define MV64360_DEV_CS3_SIZE 0x040
+#define MV64360_BOOTCS_BASE_ADDR 0x238
+#define MV64360_BOOTCS_SIZE 0x240
+
+/* SDMA Window access protection */
+#define MV64360_SDMA_WIN_ACCESS_NOT_ALLOWED 0
+#define MV64360_SDMA_WIN_ACCESS_READ_ONLY 1
+#define MV64360_SDMA_WIN_ACCESS_FULL 2
+
+/* BRG Interrupts */
+
+#define MV64360_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3))
+#define MV64360_BRG_BAUDE_TUNING_REG(brg) (0xb204 + (brg<<3))
+#define MV64360_BRG_CAUSE_REG 0xb834
+#define MV64360_BRG_MASK_REG 0xb8b4
+
+/****************************************/
+/* DMA Channel Control */
+/****************************************/
+
+#define MV64360_DMA_CHANNEL0_CONTROL 0x840
+#define MV64360_DMA_CHANNEL0_CONTROL_HIGH 0x880
+#define MV64360_DMA_CHANNEL1_CONTROL 0x844
+#define MV64360_DMA_CHANNEL1_CONTROL_HIGH 0x884
+#define MV64360_DMA_CHANNEL2_CONTROL 0x848
+#define MV64360_DMA_CHANNEL2_CONTROL_HIGH 0x888
+#define MV64360_DMA_CHANNEL3_CONTROL 0x84C
+#define MV64360_DMA_CHANNEL3_CONTROL_HIGH 0x88C
+
+
+/****************************************/
+/* IDMA Registers */
+/****************************************/
+
+#define MV64360_DMA_CHANNEL0_BYTE_COUNT 0x800
+#define MV64360_DMA_CHANNEL1_BYTE_COUNT 0x804
+#define MV64360_DMA_CHANNEL2_BYTE_COUNT 0x808
+#define MV64360_DMA_CHANNEL3_BYTE_COUNT 0x80C
+#define MV64360_DMA_CHANNEL0_SOURCE_ADDR 0x810
+#define MV64360_DMA_CHANNEL1_SOURCE_ADDR 0x814
+#define MV64360_DMA_CHANNEL2_SOURCE_ADDR 0x818
+#define MV64360_DMA_CHANNEL3_SOURCE_ADDR 0x81c
+#define MV64360_DMA_CHANNEL0_DESTINATION_ADDR 0x820
+#define MV64360_DMA_CHANNEL1_DESTINATION_ADDR 0x824
+#define MV64360_DMA_CHANNEL2_DESTINATION_ADDR 0x828
+#define MV64360_DMA_CHANNEL3_DESTINATION_ADDR 0x82C
+#define MV64360_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830
+#define MV64360_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834
+#define MV64360_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838
+#define MV64360_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C
+#define MV64360_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870
+#define MV64360_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874
+#define MV64360_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878
+#define MV64360_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C
+
+ /* IDMA Address Decoding Base Address Registers */
+
+#define MV64360_DMA_BASE_ADDR_REG0 0xa00
+#define MV64360_DMA_BASE_ADDR_REG1 0xa08
+#define MV64360_DMA_BASE_ADDR_REG2 0xa10
+#define MV64360_DMA_BASE_ADDR_REG3 0xa18
+#define MV64360_DMA_BASE_ADDR_REG4 0xa20
+#define MV64360_DMA_BASE_ADDR_REG5 0xa28
+#define MV64360_DMA_BASE_ADDR_REG6 0xa30
+#define MV64360_DMA_BASE_ADDR_REG7 0xa38
+
+ /* IDMA Address Decoding Size Address Register */
+
+#define MV64360_DMA_SIZE_REG0 0xa04
+#define MV64360_DMA_SIZE_REG1 0xa0c
+#define MV64360_DMA_SIZE_REG2 0xa14
+#define MV64360_DMA_SIZE_REG3 0xa1c
+#define MV64360_DMA_SIZE_REG4 0xa24
+#define MV64360_DMA_SIZE_REG5 0xa2c
+#define MV64360_DMA_SIZE_REG6 0xa34
+#define MV64360_DMA_SIZE_REG7 0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access
+ Protection Registers */
+
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG0 0xa60
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG1 0xa64
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG2 0xa68
+#define MV64360_DMA_HIGH_ADDR_REMAP_REG3 0xa6C
+#define MV64360_DMA_BASE_ADDR_ENABLE_REG 0xa80
+#define MV64360_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70
+#define MV64360_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74
+#define MV64360_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78
+#define MV64360_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c
+#define MV64360_DMA_ARBITER_CONTROL 0x860
+#define MV64360_DMA_CROSS_BAR_TIMEOUT 0x8d0
+
+ /* IDMA Headers Retarget Registers */
+
+#define MV64360_DMA_HEADERS_RETARGET_CONTROL 0xa84
+#define MV64360_DMA_HEADERS_RETARGET_BASE 0xa88
+
+ /* IDMA Interrupt Register */
+
+#define MV64360_DMA_INTERRUPT_CAUSE_REG 0x8c0
+#define MV64360_DMA_INTERRUPT_CAUSE_MASK 0x8c4
+#define MV64360_DMA_ERROR_ADDR 0x8c8
+#define MV64360_DMA_ERROR_SELECT 0x8cc
+
+ /* IDMA Debug Register ( for internal use ) */
+
+#define MV64360_DMA_DEBUG_LOW 0x8e0
+#define MV64360_DMA_DEBUG_HIGH 0x8e4
+#define MV64360_DMA_SPARE 0xA8C
+
+/****************************************/
+/* Timer_Counter */
+/****************************************/
+
+#define MV64360_TIMER_COUNTER0 0x850
+#define MV64360_TIMER_COUNTER1 0x854
+#define MV64360_TIMER_COUNTER2 0x858
+#define MV64360_TIMER_COUNTER3 0x85C
+#define MV64360_TIMER_COUNTER_0_3_CONTROL 0x864
+#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
+#define MV64360_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
+
+/****************************************/
+/* Watchdog registers */
+/****************************************/
+
+#define MV64360_WATCHDOG_CONFIG_REG 0xb410
+#define MV64360_WATCHDOG_VALUE_REG 0xb414
+
+/****************************************/
+/* I2C Registers */
+/****************************************/
+
+#define MV64360_I2C_SLAVE_ADDR 0xc000
+#define MV64360_I2C_EXTENDED_SLAVE_ADDR 0xc010
+#define MV64360_I2C_DATA 0xc004
+#define MV64360_I2C_CONTROL 0xc008
+#define MV64360_I2C_STATUS_BAUDE_RATE 0xc00C
+#define MV64360_I2C_SOFT_RESET 0xc01c
+
+/****************************************/
+/* GPP Interface Registers */
+/****************************************/
+
+#define MV64360_GPP_IO_CONTROL 0xf100
+#define MV64360_GPP_LEVEL_CONTROL 0xf110
+#define MV64360_GPP_VALUE 0xf104
+#define MV64360_GPP_INTERRUPT_CAUSE 0xf108
+#define MV64360_GPP_INTERRUPT_MASK0 0xf10c
+#define MV64360_GPP_INTERRUPT_MASK1 0xf114
+#define MV64360_GPP_VALUE_SET 0xf118
+#define MV64360_GPP_VALUE_CLEAR 0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers */
+/****************************************/
+
+/****************************************/
+/* Interrupts */
+/****************************************/
+
+#define MV64360_MAIN_INTERRUPT_CAUSE_LOW 0x004
+#define MV64360_MAIN_INTERRUPT_CAUSE_HIGH 0x00c
+#define MV64360_CPU_INTERRUPT0_MASK_LOW 0x014
+#define MV64360_CPU_INTERRUPT0_MASK_HIGH 0x01c
+#define MV64360_CPU_INTERRUPT0_SELECT_CAUSE 0x024
+#define MV64360_CPU_INTERRUPT1_MASK_LOW 0x034
+#define MV64360_CPU_INTERRUPT1_MASK_HIGH 0x03c
+#define MV64360_CPU_INTERRUPT1_SELECT_CAUSE 0x044
+#define MV64360_INTERRUPT0_MASK_0_LOW 0x054
+#define MV64360_INTERRUPT0_MASK_0_HIGH 0x05c
+#define MV64360_INTERRUPT0_SELECT_CAUSE 0x064
+#define MV64360_INTERRUPT1_MASK_0_LOW 0x074
+#define MV64360_INTERRUPT1_MASK_0_HIGH 0x07c
+#define MV64360_INTERRUPT1_SELECT_CAUSE 0x084
+
+/****************************************/
+/* MPP Interface Registers */
+/****************************************/
+
+#define MV64360_MPP_CONTROL0 0xf000
+#define MV64360_MPP_CONTROL1 0xf004
+#define MV64360_MPP_CONTROL2 0xf008
+#define MV64360_MPP_CONTROL3 0xf00c
+
+/****************************************/
+/* Serial Initialization registers */
+/****************************************/
+
+#define MV64360_SERIAL_INIT_LAST_DATA 0xf324
+#define MV64360_SERIAL_INIT_CONTROL 0xf328
+#define MV64360_SERIAL_INIT_STATUS 0xf32c
+
+
+#endif /* __INCgt64360rh */
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
new file mode 100644
index 0000000..3e44fb9
--- /dev/null
+++ b/board/esd/cpci750/pci.c
@@ -0,0 +1,961 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/* PCI.c - PCI functions */
+
+
+#include <common.h>
+#ifdef CONFIG_PCI
+#include <pci.h>
+
+#ifdef CONFIG_PCI_PNP
+void pciauto_config_init(struct pci_controller *hose);
+int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
+#endif
+
+#include "../../Marvell/include/pci.h"
+
+#undef DEBUG
+#undef IDE_SET_NATIVE_MODE
+static unsigned int local_buses[] = { 0, 0 };
+
+static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
+ {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+ {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
+};
+
+
+#ifdef DEBUG
+static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
+static void gt_pci_bus_mode_display (PCI_HOST host)
+{
+ unsigned int mode;
+
+
+ mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
+ switch (mode) {
+ case 0:
+ printf ("PCI %d bus mode: Conventional PCI\n", host);
+ break;
+ case 1:
+ printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+ break;
+ case 2:
+ printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+ break;
+ case 3:
+ printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+ break;
+ default:
+ printf ("Unknown BUS %d\n", mode);
+ }
+}
+#endif
+
+static const unsigned int pci_p2p_configuration_reg[] = {
+ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+static const unsigned int pci_configuration_address[] = {
+ PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
+};
+
+static const unsigned int pci_configuration_data[] = {
+ PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
+ PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
+};
+
+static const unsigned int pci_error_cause_reg[] = {
+ PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
+};
+
+static const unsigned int pci_arbiter_control[] = {
+ PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
+};
+
+static const unsigned int pci_address_space_en[] = {
+ PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
+};
+
+static const unsigned int pci_snoop_control_base_0_low[] = {
+ PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_snoop_control_top_0[] = {
+ PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
+};
+
+static const unsigned int pci_access_control_base_0_low[] = {
+ PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_access_control_top_0[] = {
+ PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
+};
+
+static const unsigned int pci_scs_bank_size[2][4] = {
+ {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
+ PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
+ {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
+ PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
+};
+
+static const unsigned int pci_p2p_configuration[] = {
+ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
+
+
+/********************************************************************
+* pciWriteConfigReg - Write to a PCI configuration register
+* - Make sure the GT is configured as a master before writing
+* to another device on the PCI.
+* - The function takes care of Big/Little endian conversion.
+*
+*
+* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec
+* (or any other PCI device spec)
+* pciDevNum: The device number needs to be addressed.
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|00|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+*********************************************************************/
+void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
+ unsigned int pciDevNum, unsigned int data)
+{
+ volatile unsigned int DataForAddrReg;
+ unsigned int functionNum;
+ unsigned int busNum = 0;
+ unsigned int addr;
+
+ if (pciDevNum > 32) /* illegal device Number */
+ return;
+ if (pciDevNum == SELF) { /* configure our configuration space. */
+ pciDevNum =
+ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+ 0x1f;
+ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+ 0xff0000;
+ }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xfc;
+ DataForAddrReg =
+ (regOffset | pciDevNum | functionNum | busNum) | BIT31;
+ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+ GT_REG_READ (pci_configuration_address[host], &addr);
+ if (addr != DataForAddrReg)
+ return;
+ GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+/********************************************************************
+* pciReadConfigReg - Read from a PCI0 configuration register
+* - Make sure the GT is configured as a master before reading
+* from another device on the PCI.
+* - The function takes care of Big/Little endian conversion.
+* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
+* spec)
+* pciDevNum: The device number needs to be addressed.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+* cause register to make sure the data is valid
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|00|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+*********************************************************************/
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+ unsigned int pciDevNum)
+{
+ volatile unsigned int DataForAddrReg;
+ unsigned int data;
+ unsigned int functionNum;
+ unsigned int busNum = 0;
+
+ if (pciDevNum > 32) /* illegal device Number */
+ return 0xffffffff;
+ if (pciDevNum == SELF) { /* configure our configuration space. */
+ pciDevNum =
+ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+ 0x1f;
+ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+ 0xff0000;
+ }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xfc;
+ DataForAddrReg =
+ (regOffset | pciDevNum | functionNum | busNum) | BIT31;
+ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+ GT_REG_READ (pci_configuration_address[host], &data);
+ if (data != DataForAddrReg)
+ return 0xffffffff;
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return data;
+}
+
+/********************************************************************
+* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
+* the agent is placed on another Bus. For more
+* information read P2P in the PCI spec.
+*
+* Inputs: unsigned int regOffset - The register offset as it apears in the
+* GT spec (or any other PCI device spec).
+* unsigned int pciDevNum - The device number needs to be addressed.
+* unsigned int busNum - On which bus does the Target agent connect
+* to.
+* unsigned int data - data to be written.
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|01|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+* The configuration Address is configure as type-I (bits[1:0] = '01') due to
+* PCI spec referring to P2P.
+*
+*********************************************************************/
+void pciOverBridgeWriteConfigReg (PCI_HOST host,
+ unsigned int regOffset,
+ unsigned int pciDevNum,
+ unsigned int busNum, unsigned int data)
+{
+ unsigned int DataForReg;
+ unsigned int functionNum;
+
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xff;
+ busNum = busNum << 16;
+ if (pciDevNum == SELF) { /* This board */
+ DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
+ } else {
+ DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+ BIT31 | BIT0;
+ }
+ GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+ GT_REG_WRITE (pci_configuration_data[host], data);
+}
+
+
+/********************************************************************
+* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where
+* the agent target locate on another PCI bus.
+* - Make sure the GT is configured as a master
+* before reading from another device on the PCI.
+* - The function takes care of Big/Little endian
+* conversion.
+* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
+* spec). (configuration register offset.)
+* pciDevNum: The device number needs to be addressed.
+* busNum: the Bus number where the agent is place.
+* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
+* cause register to make sure the data is valid
+*
+* Configuration Address 0xCF8:
+*
+* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
+* |congif|Reserved| Bus |Device|Function|Register|01|
+* |Enable| |Number|Number| Number | Number | | <=field Name
+*
+*********************************************************************/
+unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
+ unsigned int regOffset,
+ unsigned int pciDevNum,
+ unsigned int busNum)
+{
+ unsigned int DataForReg;
+ unsigned int data;
+ unsigned int functionNum;
+
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xff;
+ busNum = busNum << 16;
+ if (pciDevNum == SELF) { /* This board */
+ DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
+ } else { /* agent on another bus */
+
+ DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+ BIT0 | BIT31;
+ }
+ GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return data;
+}
+
+
+/********************************************************************
+* pciGetRegOffset - Gets the register offset for this region config.
+*
+* INPUT: Bus, Region - The bus and region we ask for its base address.
+* OUTPUT: N/A
+* RETURNS: PCI register base address
+*********************************************************************/
+static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
+{
+ switch (host) {
+ case PCI_HOST0:
+ switch (region) {
+ case PCI_IO:
+ return PCI_0I_O_LOW_DECODE_ADDRESS;
+ case PCI_REGION0:
+ return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+ case PCI_REGION1:
+ return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
+ case PCI_REGION2:
+ return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
+ case PCI_REGION3:
+ return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
+ }
+ case PCI_HOST1:
+ switch (region) {
+ case PCI_IO:
+ return PCI_1I_O_LOW_DECODE_ADDRESS;
+ case PCI_REGION0:
+ return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
+ case PCI_REGION1:
+ return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
+ case PCI_REGION2:
+ return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
+ case PCI_REGION3:
+ return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
+ }
+ }
+ return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+}
+
+static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
+{
+ switch (host) {
+ case PCI_HOST0:
+ switch (region) {
+ case PCI_IO:
+ return PCI_0I_O_ADDRESS_REMAP;
+ case PCI_REGION0:
+ return PCI_0MEMORY0_ADDRESS_REMAP;
+ case PCI_REGION1:
+ return PCI_0MEMORY1_ADDRESS_REMAP;
+ case PCI_REGION2:
+ return PCI_0MEMORY2_ADDRESS_REMAP;
+ case PCI_REGION3:
+ return PCI_0MEMORY3_ADDRESS_REMAP;
+ }
+ case PCI_HOST1:
+ switch (region) {
+ case PCI_IO:
+ return PCI_1I_O_ADDRESS_REMAP;
+ case PCI_REGION0:
+ return PCI_1MEMORY0_ADDRESS_REMAP;
+ case PCI_REGION1:
+ return PCI_1MEMORY1_ADDRESS_REMAP;
+ case PCI_REGION2:
+ return PCI_1MEMORY2_ADDRESS_REMAP;
+ case PCI_REGION3:
+ return PCI_1MEMORY3_ADDRESS_REMAP;
+ }
+ }
+ return PCI_0MEMORY0_ADDRESS_REMAP;
+}
+
+/********************************************************************
+* pciGetBaseAddress - Gets the base address of a PCI.
+* - If the PCI size is 0 then this base address has no meaning!!!
+*
+*
+* INPUT: Bus, Region - The bus and region we ask for its base address.
+* OUTPUT: N/A
+* RETURNS: PCI base address.
+*********************************************************************/
+unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
+{
+ unsigned int regBase;
+ unsigned int regEnd;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &regBase);
+ GT_REG_READ (regOffset + 8, &regEnd);
+
+ if (regEnd <= regBase)
+ return 0xffffffff; /* ERROR !!! */
+
+ regBase = regBase << 16;
+ return regBase;
+}
+
+bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
+ unsigned int bankBase, unsigned int bankLength)
+{
+ unsigned int low = 0xfff;
+ unsigned int high = 0x0;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+ unsigned int remapOffset = pciGetRemapOffset (host, region);
+
+ if (bankLength != 0) {
+ low = (bankBase >> 16) & 0xffff;
+ high = ((bankBase + bankLength) >> 16) - 1;
+ }
+
+ GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */
+ GT_REG_WRITE (regOffset + 8, high);
+
+ if (bankLength != 0) { /* must do AFTER writing maps */
+ GT_REG_WRITE (remapOffset, remapBase >> 16); /* sorry, 32 bits only.
+ dont support upper 32
+ in this driver */
+ }
+ return true;
+}
+
+unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
+{
+ unsigned int low;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &low);
+ return (low & 0xffff) << 16;
+}
+
+unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
+{
+ unsigned int low, high;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &low);
+ GT_REG_READ (regOffset + 8, &high);
+ return ((high & 0xffff) + 1) << 16;
+}
+
+
+/* ronen - 7/Dec/03*/
+/********************************************************************
+* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
+* Inputs: one of the PCI BAR
+*********************************************************************/
+void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+ RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
+{
+ SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
+}
+
+/********************************************************************
+* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
+*
+* Inputs: base and size of PCI SCS
+*********************************************************************/
+void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
+ unsigned int pciDramBase, unsigned int pciDramSize)
+{
+ /*ronen different function for 3rd bank. */
+ unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
+
+ pciDramBase = pciDramBase & 0xfffff000;
+ pciDramBase = pciDramBase | (pciReadConfigReg (host,
+ PCI_SCS_0_BASE_ADDRESS
+ + offset,
+ SELF) & 0x00000fff);
+ pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
+ pciDramBase);
+ if (pciDramSize == 0)
+ pciDramSize++;
+ GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
+ gtPciEnableInternalBAR (host, bank);
+}
+
+/********************************************************************
+* pciSetRegionFeatures - This function modifys one of the 8 regions with
+* feature bits given as an input.
+* - Be advised to check the spec before modifying them.
+* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
+* unsigned int features - See file: pci.h there are defintion for those
+* region features.
+* unsigned int baseAddress - The region base Address.
+* unsigned int topAddress - The region top Address.
+* Returns: false if one of the parameters is erroneous true otherwise.
+*********************************************************************/
+bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
+ unsigned int features, unsigned int baseAddress,
+ unsigned int regionLength)
+{
+ unsigned int accessLow;
+ unsigned int accessHigh;
+ unsigned int accessTop = baseAddress + regionLength;
+
+ if (regionLength == 0) { /* close the region. */
+ pciDisableAccessRegion (host, region);
+ return true;
+ }
+ /* base Address is store is bits [11:0] */
+ accessLow = (baseAddress & 0xfff00000) >> 20;
+ /* All the features are update according to the defines in pci.h (to be on
+ the safe side we disable bits: [11:0] */
+ accessLow = accessLow | (features & 0xfffff000);
+ /* write to the Low Access Region register */
+ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+ accessLow);
+
+ accessHigh = (accessTop & 0xfff00000) >> 20;
+
+ /* write to the High Access Region register */
+ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
+ accessHigh - 1);
+ return true;
+}
+
+/********************************************************************
+* pciDisableAccessRegion - Disable The given Region by writing MAX size
+* to its low Address and MIN size to its high Address.
+*
+* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled.
+* Returns: N/A.
+*********************************************************************/
+void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
+{
+ /* writing back the registers default values. */
+ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+ 0x01001fff);
+ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
+}
+
+/********************************************************************
+* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
+*
+* Inputs: N/A
+* Returns: true.
+*********************************************************************/
+bool pciArbiterEnable (PCI_HOST host)
+{
+ unsigned int regData;
+
+ GT_REG_READ (pci_arbiter_control[host], &regData);
+ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
+ return true;
+}
+
+/********************************************************************
+* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
+*
+* Inputs: N/A
+* Returns: true
+*********************************************************************/
+bool pciArbiterDisable (PCI_HOST host)
+{
+ unsigned int regData;
+
+ GT_REG_READ (pci_arbiter_control[host], &regData);
+ GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
+ return true;
+}
+
+/********************************************************************
+* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
+*
+* Inputs: PCI_AGENT_PRIO internalAgent - priotity for internal agent.
+* PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
+* PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
+* PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
+* PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
+* PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
+* PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
+* Returns: true
+*********************************************************************/
+bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
+ PCI_AGENT_PRIO externalAgent0,
+ PCI_AGENT_PRIO externalAgent1,
+ PCI_AGENT_PRIO externalAgent2,
+ PCI_AGENT_PRIO externalAgent3,
+ PCI_AGENT_PRIO externalAgent4,
+ PCI_AGENT_PRIO externalAgent5)
+{
+ unsigned int regData;
+ unsigned int writeData;
+
+ GT_REG_READ (pci_arbiter_control[host], &regData);
+ writeData = (internalAgent << 7) + (externalAgent0 << 8) +
+ (externalAgent1 << 9) + (externalAgent2 << 10) +
+ (externalAgent3 << 11) + (externalAgent4 << 12) +
+ (externalAgent5 << 13);
+ regData = (regData & 0xffffc07f) | writeData;
+ GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
+ return true;
+}
+
+/********************************************************************
+* pciParkingDisable - Park on last option disable, with this function you can
+* disable the park on last mechanism for each agent.
+* disabling this option for all agents results parking
+* on the internal master.
+*
+* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent.
+* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
+* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
+* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
+* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
+* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
+* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
+* Returns: true
+*********************************************************************/
+bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
+ PCI_AGENT_PARK externalAgent0,
+ PCI_AGENT_PARK externalAgent1,
+ PCI_AGENT_PARK externalAgent2,
+ PCI_AGENT_PARK externalAgent3,
+ PCI_AGENT_PARK externalAgent4,
+ PCI_AGENT_PARK externalAgent5)
+{
+ unsigned int regData;
+ unsigned int writeData;
+
+ GT_REG_READ (pci_arbiter_control[host], &regData);
+ writeData = (internalAgent << 14) + (externalAgent0 << 15) +
+ (externalAgent1 << 16) + (externalAgent2 << 17) +
+ (externalAgent3 << 18) + (externalAgent4 << 19) +
+ (externalAgent5 << 20);
+ regData = (regData & ~(0x7f << 14)) | writeData;
+ GT_REG_WRITE (pci_arbiter_control[host], regData);
+ return true;
+}
+
+/********************************************************************
+* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
+* respond to grant assertion within a window specified in
+* the input value: 'brokenValue'.
+*
+* Inputs: unsigned char brokenValue - A value which limits the Master to hold the
+* grant without asserting frame.
+* Returns: Error for illegal broken value otherwise true.
+*********************************************************************/
+bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
+{
+ unsigned int data;
+ unsigned int regData;
+
+ if (brokenValue > 0xf)
+ return false; /* brokenValue must be 4 bit */
+ data = brokenValue << 3;
+ GT_REG_READ (pci_arbiter_control[host], &regData);
+ regData = (regData & 0xffffff87) | data;
+ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
+ return true;
+}
+
+/********************************************************************
+* pciDisableBrokenAgentDetection - This function disable the Broken agent
+* Detection mechanism.
+* NOTE: This operation may cause a dead lock on the
+* pci0 arbitration.
+*
+* Inputs: N/A
+* Returns: true.
+*********************************************************************/
+bool pciDisableBrokenAgentDetection (PCI_HOST host)
+{
+ unsigned int regData;
+
+ GT_REG_READ (pci_arbiter_control[host], &regData);
+ regData = regData & 0xfffffffd;
+ GT_REG_WRITE (pci_arbiter_control[host], regData);
+ return true;
+}
+
+/********************************************************************
+* pciP2PConfig - This function set the PCI_n P2P configurate.
+* For more information on the P2P read PCI spec.
+*
+* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
+* Boundry.
+* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
+* Boundry.
+* unsigned int busNum - The CPI bus number to which the PCI interface
+* is connected.
+* unsigned int devNum - The PCI interface's device number.
+*
+* Returns: true.
+*********************************************************************/
+bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
+ unsigned int SecondBusHigh,
+ unsigned int busNum, unsigned int devNum)
+{
+ unsigned int regData;
+
+ regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
+ ((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
+ GT_REG_WRITE (pci_p2p_configuration[host], regData);
+ return true;
+}
+
+/********************************************************************
+* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
+* supports Cache Coherency in the PCI_n interface.
+* Inputs: region - One of the four regions.
+* snoopType - There is four optional Types:
+* 1. No Snoop.
+* 2. Snoop to WT region.
+* 3. Snoop to WB region.
+* 4. Snoop & Invalidate to WB region.
+* baseAddress - Base Address of this region.
+* regionLength - Region length.
+* Returns: false if one of the parameters is wrong otherwise return true.
+*********************************************************************/
+bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
+ PCI_SNOOP_TYPE snoopType,
+ unsigned int baseAddress,
+ unsigned int regionLength)
+{
+ unsigned int snoopXbaseAddress;
+ unsigned int snoopXtopAddress;
+ unsigned int data;
+ unsigned int snoopHigh = baseAddress + regionLength;
+
+ if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
+ return false;
+ snoopXbaseAddress =
+ pci_snoop_control_base_0_low[host] + 0x10 * region;
+ snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
+ if (regionLength == 0) { /* closing the region */
+ GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
+ GT_REG_WRITE (snoopXtopAddress, 0);
+ return true;
+ }
+ baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
+ data = (baseAddress >> 20) | snoopType << 12;
+ GT_REG_WRITE (snoopXbaseAddress, data);
+ snoopHigh = (snoopHigh & 0xfff00000) >> 20;
+ GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
+ return true;
+}
+
+static int gt_read_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
+{
+ int bus = PCI_BUS (dev);
+
+ if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+ *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV (dev));
+ } else {
+ *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
+ cfg_addr, offset,
+ PCI_DEV (dev), bus);
+ }
+
+ return 0;
+}
+
+static int gt_write_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 value)
+{
+ int bus = PCI_BUS (dev);
+
+ if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+ pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV (dev), value);
+ } else {
+ pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+ offset, PCI_DEV (dev), bus,
+ value);
+ }
+ return 0;
+}
+
+
+static void gt_setup_ide (struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *entry)
+{
+ static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
+ u32 bar_response, bar_value;
+ int bar;
+
+ for (bar = 0; bar < 6; bar++) {
+ /*ronen different function for 3rd bank. */
+ unsigned int offset =
+ (bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
+
+ pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
+ 0x0);
+ pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + offset,
+ &bar_response);
+
+ pciauto_region_allocate (bar_response &
+ PCI_BASE_ADDRESS_SPACE_IO ? hose->
+ pci_io : hose->pci_mem, ide_bar[bar],
+ &bar_value);
+
+ pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
+ bar_value);
+ }
+}
+
+
+/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */
+/* and is curently not called *. */
+#if 0
+static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char pin, irq;
+
+ pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
+
+ if (pin == 1) { /* only allow INT A */
+ irq = pci_irq_swizzle[(PCI_HOST) hose->
+ cfg_addr][PCI_DEV (dev)];
+ if (irq)
+ pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
+ }
+}
+#endif
+
+struct pci_config_table gt_config_table[] = {
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
+
+ {}
+};
+
+struct pci_controller pci0_hose = {
+/* fixup_irq: gt_fixup_irq, */
+ config_table:gt_config_table,
+};
+
+struct pci_controller pci1_hose = {
+/* fixup_irq: gt_fixup_irq, */
+ config_table:gt_config_table,
+};
+
+void pci_init_board (void)
+{
+ unsigned int command;
+#ifdef CONFIG_PCI_PNP
+ unsigned int bar;
+#endif
+
+#ifdef DEBUG
+ gt_pci_bus_mode_display (PCI_HOST0);
+#endif
+
+ pci0_hose.first_busno = 0;
+ pci0_hose.last_busno = 0xff;
+ local_buses[0] = pci0_hose.first_busno;
+
+ /* PCI memory space */
+ pci_set_region (pci0_hose.regions + 0,
+ CFG_PCI0_0_MEM_SPACE,
+ CFG_PCI0_0_MEM_SPACE,
+ CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region (pci0_hose.regions + 1,
+ CFG_PCI0_IO_SPACE_PCI,
+ CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+
+ pci_set_ops (&pci0_hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ gt_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ gt_write_config_dword);
+ pci0_hose.region_count = 2;
+
+ pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
+
+ pci_register_hose (&pci0_hose);
+ pciArbiterEnable (PCI_HOST0);
+ pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MASTER;
+ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MEMORY;
+ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+
+#ifdef CONFIG_PCI_PNP
+ pciauto_config_init(&pci0_hose);
+ pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
+#endif
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
+
+#ifdef DEBUG
+ gt_pci_bus_mode_display (PCI_HOST1);
+#endif
+ pci1_hose.first_busno = pci0_hose.last_busno + 1;
+ pci1_hose.last_busno = 0xff;
+ pci1_hose.current_busno = pci1_hose.first_busno;
+ local_buses[1] = pci1_hose.first_busno;
+
+ /* PCI memory space */
+ pci_set_region (pci1_hose.regions + 0,
+ CFG_PCI1_0_MEM_SPACE,
+ CFG_PCI1_0_MEM_SPACE,
+ CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region (pci1_hose.regions + 1,
+ CFG_PCI1_IO_SPACE_PCI,
+ CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+ pci_set_ops (&pci1_hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ gt_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ gt_write_config_dword);
+
+ pci1_hose.region_count = 2;
+
+ pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
+
+ pci_register_hose (&pci1_hose);
+
+ pciArbiterEnable (PCI_HOST1);
+ pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
+
+ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MASTER;
+ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+#ifdef CONFIG_PCI_PNP
+ pciauto_config_init(&pci1_hose);
+ pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar);
+#endif
+ pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno);
+
+ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MEMORY;
+ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
+
+}
+#endif /* of CONFIG_PCI */
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
new file mode 100644
index 0000000..d22ffe5
--- /dev/null
+++ b/board/esd/cpci750/sdram_init.c
@@ -0,0 +1,1439 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * adaption for the Marvell DB64360 Board
+ * Ingo Assmus (ingo.assmus@keymile.com)
+ *
+ * adaption for the cpci750 Board
+ * Reinhard Arlt (reinhard.arlt@esd-electronics.com)
+ *************************************************************************/
+
+
+/* sdram_init.c - automatic memory sizing */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include "../../Marvell/include/memory.h"
+#include "../../Marvell/include/pci.h"
+#include "../../Marvell/include/mv_gen_reg.h"
+#include <net.h>
+
+#include "eth.h"
+#include "mpsc.h"
+#include "../../Marvell/common/i2c.h"
+#include "64360.h"
+#include "mv_regs.h"
+
+
+#undef DEBUG
+/* #define DEBUG */
+#ifdef CONFIG_PCI
+#define MAP_PCI
+#endif /* of CONFIG_PCI */
+
+#ifdef DEBUG
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+int set_dfcdlInit(void); /* setup delay line of Mv64360 */
+
+/* ------------------------------------------------------------------------- */
+
+int
+memory_map_bank(unsigned int bankNo,
+ unsigned int bankBase,
+ unsigned int bankLength)
+{
+#ifdef MAP_PCI
+ PCI_HOST host;
+#endif
+
+
+#ifdef DEBUG
+ if (bankLength > 0) {
+ printf("mapping bank %d at %08x - %08x\n",
+ bankNo, bankBase, bankBase + bankLength - 1);
+ } else {
+ printf("unmapping bank %d\n", bankNo);
+ }
+#endif
+
+ memoryMapBank(bankNo, bankBase, bankLength);
+
+#ifdef MAP_PCI
+ for (host=PCI_HOST0;host<=PCI_HOST1;host++) {
+ const int features=
+ PREFETCH_ENABLE |
+ DELAYED_READ_ENABLE |
+ AGGRESSIVE_PREFETCH |
+ READ_LINE_AGGRESSIVE_PREFETCH |
+ READ_MULTI_AGGRESSIVE_PREFETCH |
+ MAX_BURST_4 |
+ PCI_NO_SWAP;
+
+ pciMapMemoryBank(host, bankNo, bankBase, bankLength);
+
+ pciSetRegionSnoopMode(host, bankNo, PCI_SNOOP_WB, bankBase,
+ bankLength);
+
+ pciSetRegionFeatures(host, bankNo, features, bankBase, bankLength);
+ }
+#endif
+ return 0;
+}
+
+#define GB (1 << 30)
+
+/* much of this code is based on (or is) the code in the pip405 port */
+/* thanks go to the authors of said port - Josh */
+
+/* structure to store the relevant information about an sdram bank */
+typedef struct sdram_info {
+ uchar drb_size;
+ uchar registered, ecc;
+ uchar tpar;
+ uchar tras_clocks;
+ uchar burst_len;
+ uchar banks, slot;
+} sdram_info_t;
+
+/* Typedefs for 'gtAuxilGetDIMMinfo' function */
+
+typedef enum _memoryType {SDRAM, DDR} MEMORY_TYPE;
+
+typedef enum _voltageInterface {TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
+ SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
+ } VOLTAGE_INTERFACE;
+
+typedef enum _max_CL_supported_DDR {DDR_CL_1=1, DDR_CL_1_5=2, DDR_CL_2=4, DDR_CL_2_5=8, DDR_CL_3=16, DDR_CL_3_5=32, DDR_CL_FAULT} MAX_CL_SUPPORTED_DDR;
+typedef enum _max_CL_supported_SD {SD_CL_1=1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7, SD_FAULT} MAX_CL_SUPPORTED_SD;
+
+
+/* SDRAM/DDR information struct */
+typedef struct _gtMemoryDimmInfo
+{
+ MEMORY_TYPE memoryType;
+ unsigned int numOfRowAddresses;
+ unsigned int numOfColAddresses;
+ unsigned int numOfModuleBanks;
+ unsigned int dataWidth;
+ VOLTAGE_INTERFACE voltageInterface;
+ unsigned int errorCheckType; /* ECC , PARITY..*/
+ unsigned int sdramWidth; /* 4,8,16 or 32 */;
+ unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ unsigned int minClkDelay;
+ unsigned int burstLengthSupported;
+ unsigned int numOfBanksOnEachDevice;
+ unsigned int suportedCasLatencies;
+ unsigned int RefreshInterval;
+ unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */
+ unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns)*/
+ MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
+ MAX_CL_SUPPORTED_SD maxClSupported_SD;
+ unsigned int moduleBankDensity;
+ /* module attributes (true for yes) */
+ bool bufferedAddrAndControlInputs;
+ bool registeredAddrAndControlInputs;
+ bool onCardPLL;
+ bool bufferedDQMBinputs;
+ bool registeredDQMBinputs;
+ bool differentialClockInput;
+ bool redundantRowAddressing;
+
+ /* module general attributes */
+ bool suportedAutoPreCharge;
+ bool suportedPreChargeAll;
+ bool suportedEarlyRasPreCharge;
+ bool suportedWrite1ReadBurst;
+ bool suported5PercentLowVCC;
+ bool suported5PercentUpperVCC;
+ /* module timing parameters */
+ unsigned int minRasToCasDelay;
+ unsigned int minRowActiveRowActiveDelay;
+ unsigned int minRasPulseWidth;
+ unsigned int minRowPrechargeTime; /* measured in ns */
+
+ int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */
+ int addrAndCommandSetupTime; /* (measured in ns/100) */
+ int dataInputSetupTime; /* LoP left of point (measured in ns) */
+ int dataInputHoldTime; /* LoP left of point (measured in ns) */
+/* tAC times for highest 2nd and 3rd highest CAS Latency values */
+ unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns)*/
+ unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns)*/
+ unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns)*/
+
+ unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns)*/
+
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns)*/
+
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns)*/
+
+ /* Parameters calculated from
+ the extracted DIMM information */
+ unsigned int size;
+ unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */
+ unsigned int numberOfDevices;
+ uchar drb_size; /* DRAM size in n*64Mbit */
+ uchar slot; /* Slot Number this module is inserted in */
+ uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */
+#ifdef DEBUG
+ uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */
+ uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */
+ uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */
+ unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */
+ unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */
+ unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */
+ uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */
+
+#endif
+} AUX_MEM_DIMM_INFO;
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into 10 ps unit values
+ */
+static inline unsigned short
+NS10to10PS(unsigned char spd_byte)
+{
+ unsigned short ns, ns10;
+
+ /* isolate upper nibble */
+ ns = (spd_byte >> 4) & 0x0F;
+ /* isolate lower nibble */
+ ns10 = (spd_byte & 0x0F);
+
+ return(ns*100 + ns10*10);
+}
+
+/*
+ * translate ns coding of SPD timing values
+ * into 10 ps unit values
+ */
+static inline unsigned short
+NSto10PS(unsigned char spd_byte)
+{
+ return(spd_byte*100);
+}
+
+/* This code reads the SPD chip on the sdram and populates
+ * the array which is passed in with the relevant information */
+/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
+static int
+check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo)
+
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned long spd_checksum;
+
+ uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
+ int ret;
+ unsigned int i,j,density = 1,devicesForErrCheck = 0;
+#ifdef DEBUG
+ unsigned int k;
+#endif
+ unsigned int rightOfPoint = 0,leftOfPoint = 0, mult, div, time_tmp;
+ int sign = 1,shift,maskLeftOfPoint,maskRightOfPoint;
+ uchar supp_cal, cal_val;
+ ulong memclk, tmemclk;
+ ulong tmp;
+ uchar trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks;
+ uchar data[128];
+
+ memclk = gd->bus_clk;
+ tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */
+
+ memset(data, 0, sizeof(data));
+
+
+ ret = 0;
+
+ DP(puts("before i2c read\n"));
+
+ ret = i2c_read(addr, 0, 2, data, 128);
+
+ DP(puts("after i2c read\n"));
+
+ if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') || (data[67] != '-') ||
+ (data[68] != 'g') || (data[69] != 'm') || (data[70] != 'b') || (data[71] != 'h'))
+ {
+ ret = -1;
+ }
+
+ if ((ret != 0) && (slot == 0))
+ {
+ memset(data, 0, sizeof(data));
+ data[ 0] = 0x80; data[ 1] = 0x08; data[ 2] = 0x07; data[ 3] = 0x0c;
+ data[ 4] = 0x09; data[ 5] = 0x01; data[ 6] = 0x48; data[ 7] = 0x00;
+ data[ 8] = 0x04; data[ 9] = 0x75; data[10] = 0x80; data[11] = 0x02;
+ data[12] = 0x80; data[13] = 0x10; data[14] = 0x08; data[15] = 0x01;
+ data[16] = 0x0e; data[17] = 0x04; data[18] = 0x0c; data[19] = 0x01;
+ data[20] = 0x02; data[21] = 0x20; data[22] = 0x00; data[23] = 0xa0;
+ data[24] = 0x80; data[25] = 0x00; data[26] = 0x00; data[27] = 0x50;
+ data[28] = 0x3c; data[29] = 0x50; data[30] = 0x32; data[31] = 0x10;
+ data[32] = 0xb0; data[33] = 0xb0; data[34] = 0x60; data[35] = 0x60;
+ data[64] = 'e' ; data[65] = 's' ; data[66] = 'd' ; data[67] = '-' ;
+ data[68] = 'g' ; data[69] = 'm' ; data[70] = 'b' ; data[71] = 'h' ;
+ ret = 0;
+ }
+
+ /* zero all the values */
+ memset(dimmInfo, 0, sizeof(*dimmInfo));
+
+ /* copy the SPD content 1:1 into the dimmInfo structure*/
+ for(i = 0 ; i <= 127 ; i++)
+ {
+ dimmInfo->spd_raw_data[i] = data[i];
+ }
+
+ if (ret) {
+ DP(printf("No DIMM in slot %d [err = %x]\n", slot, ret));
+ return 0;
+ }
+ else
+ dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */
+
+#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+
+ for(i = 0 ; i <= 127 ; i++)
+ {
+ printf("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], data[i]);
+ }
+
+#endif
+#ifdef DEBUG
+/* find Manufactura of Dimm Module */
+ for(i = 0 ; i < sizeof(dimmInfo->manufactura) ; i++)
+ {
+ dimmInfo->manufactura[i] = data[64+i];
+ }
+ printf("\nThis RAM-Module is produced by: %s\n", dimmInfo->manufactura);
+
+/* find Manul-ID of Dimm Module */
+ for(i = 0 ; i < sizeof(dimmInfo->modul_id) ; i++)
+ {
+ dimmInfo->modul_id[i] = data[73+i];
+ }
+ printf("The Module-ID of this RAM-Module is: %s\n", dimmInfo->modul_id);
+
+/* find Vendor-Data of Dimm Module */
+ for(i = 0 ; i < sizeof(dimmInfo->vendor_data) ; i++)
+ {
+ dimmInfo->vendor_data[i] = data[99+i];
+ }
+ printf("Vendor Data of this RAM-Module is: %s\n", dimmInfo->vendor_data);
+
+/* find modul_serial_no of Dimm Module */
+ dimmInfo->modul_serial_no = (*((unsigned long *)(&data[95])));
+ printf("Serial No. of this RAM-Module is: %ld (%lx)\n", dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
+
+/* find Manufac-Data of Dimm Module */
+ dimmInfo->manufac_date = (*((unsigned int *)(&data[93])));
+ printf("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data [94]); /*dimmInfo->manufac_date*/
+
+/* find modul_revision of Dimm Module */
+ dimmInfo->modul_revision = (*((unsigned int *)(&data[91])));
+ printf("Module Revision of this RAM-Module is: %d.%d\n", data[91], data [92]); /* dimmInfo->modul_revision*/
+
+/* find manufac_place of Dimm Module */
+ dimmInfo->manufac_place = (*((unsigned char *)(&data[72])));
+ printf("manufac_place of this RAM-Module is: %d\n", dimmInfo->manufac_place);
+
+#endif
+/*------------------------------------------------------------------------------------------------------------------------------*/
+/* calculate SPD checksum */
+/*------------------------------------------------------------------------------------------------------------------------------*/
+ spd_checksum = 0;
+#if 0 /* test-only */
+ for(i = 0 ; i <= 62 ; i++)
+ {
+ spd_checksum += data[i];
+ }
+
+ if ((spd_checksum & 0xff) != data[63])
+ {
+ printf("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int)(spd_checksum & 0xff), data[63]);
+ hang();
+ }
+
+ else
+ printf("SPD Checksum ok!\n");
+#endif /* test-only */
+
+/*------------------------------------------------------------------------------------------------------------------------------*/
+ for(i = 2 ; i <= 35 ; i++)
+ {
+ switch(i)
+ {
+ case 2: /* Memory type (DDR / SDRAM) */
+ dimmInfo->memoryType = (data[i] == 0x7)? DDR:SDRAM;
+ #ifdef DEBUG
+ if (dimmInfo->memoryType == 0)
+ DP(printf("Dram_type in slot %d is: SDRAM\n", dimmInfo->slot));
+ if (dimmInfo->memoryType == 1)
+ DP(printf("Dram_type in slot %d is: DDRAM\n", dimmInfo->slot));
+ #endif
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 3: /* Number Of Row Addresses */
+ dimmInfo->numOfRowAddresses = data[i];
+ DP(printf("Module Number of row addresses: %d\n", dimmInfo->numOfRowAddresses));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 4: /* Number Of Column Addresses */
+ dimmInfo->numOfColAddresses = data[i];
+ DP(printf("Module Number of col addresses: %d\n", dimmInfo->numOfColAddresses));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 5: /* Number Of Module Banks */
+ dimmInfo->numOfModuleBanks = data[i];
+ DP(printf("Number of Banks on Mod. : %d\n", dimmInfo->numOfModuleBanks));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 6: /* Data Width */
+ dimmInfo->dataWidth = data[i];
+ DP(printf("Module Data Width: %d\n", dimmInfo->dataWidth));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 8: /* Voltage Interface */
+ switch(data[i])
+ {
+ case 0x0:
+ dimmInfo->voltageInterface = TTL_5V_TOLERANT;
+ DP(printf("Module is TTL_5V_TOLERANT\n"));
+ break;
+ case 0x1:
+ dimmInfo->voltageInterface = LVTTL;
+ DP(printf("Module is LVTTL\n"));
+ break;
+ case 0x2:
+ dimmInfo->voltageInterface = HSTL_1_5V;
+ DP(printf("Module is TTL_5V_TOLERANT\n"));
+ break;
+ case 0x3:
+ dimmInfo->voltageInterface = SSTL_3_3V;
+ DP(printf("Module is HSTL_1_5V\n"));
+ break;
+ case 0x4:
+ dimmInfo->voltageInterface = SSTL_2_5V;
+ DP(printf("Module is SSTL_2_5V\n"));
+ break;
+ default:
+ dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
+ DP(printf("Module is VOLTAGE_UNKNOWN\n"));
+ break;
+ }
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 9: /* Minimum Cycle Time At Max CasLatancy */
+ shift = (dimmInfo->memoryType == DDR)? 4:2;
+ mult = (dimmInfo->memoryType == DDR)? 10:25;
+ maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
+ maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
+ leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+ rightOfPoint = (data[i] & maskRightOfPoint)* mult;
+ dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = leftOfPoint;
+ dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = rightOfPoint;
+ DP(printf("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",leftOfPoint, rightOfPoint));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 10: /* Clock To Data Out */
+ div = (dimmInfo->memoryType == DDR)? 100:10;
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ dimmInfo->clockToDataOut_LoP = leftOfPoint;
+ dimmInfo->clockToDataOut_RoP = rightOfPoint;
+ DP(printf("Clock To Data Out: %d.%2d [ns]\n",leftOfPoint, rightOfPoint ));
+ /*dimmInfo->clockToDataOut*/
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ECC
+ case 11: /* Error Check Type */
+ dimmInfo->errorCheckType = data[i];
+ DP(printf("Error Check Type (0=NONE): %d\n", dimmInfo->errorCheckType));
+ break;
+#endif
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 12: /* Refresh Interval */
+ dimmInfo->RefreshInterval = data[i];
+ DP(printf("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", dimmInfo->RefreshInterval));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 13: /* Sdram Width */
+ dimmInfo->sdramWidth = data[i];
+ DP(printf("Sdram Width: %d\n", dimmInfo->sdramWidth));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 14: /* Error Check Data Width */
+ dimmInfo->errorCheckDataWidth = data[i];
+ DP(printf("Error Check Data Width: %d\n", dimmInfo->errorCheckDataWidth));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 15: /* Minimum Clock Delay */
+ dimmInfo->minClkDelay = data[i];
+ DP(printf("Minimum Clock Delay: %d\n", dimmInfo->minClkDelay));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 16: /* Burst Length Supported */
+ /******-******-******-*******
+ * bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-*******
+ burst length = * 8 | 4 | 2 | 1 *
+ *****************************
+
+ If for example bit0 and bit2 are set, the burst
+ length supported are 1 and 4. */
+
+ dimmInfo->burstLengthSupported = data[i];
+#ifdef DEBUG
+ DP(printf("Burst Length Supported: "));
+ if (dimmInfo->burstLengthSupported & 0x01)
+ DP(printf("1, "));
+ if (dimmInfo->burstLengthSupported & 0x02)
+ DP(printf("2, "));
+ if (dimmInfo->burstLengthSupported & 0x04)
+ DP(printf("4, "));
+ if (dimmInfo->burstLengthSupported & 0x08)
+ DP(printf("8, "));
+ DP(printf(" Bit \n"));
+#endif
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 17: /* Number Of Banks On Each Device */
+ dimmInfo->numOfBanksOnEachDevice = data[i];
+ DP(printf("Number Of Banks On Each Chip: %d\n", dimmInfo->numOfBanksOnEachDevice));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 18: /* Suported Cas Latencies */
+
+ /* DDR:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ *********************************************************
+ SDRAM:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ ********************************************************/
+ dimmInfo->suportedCasLatencies = data[i];
+#ifdef DEBUG
+ DP(printf("Suported Cas Latencies: (CL) "));
+ if (dimmInfo->memoryType == 0) /* SDRAM*/
+ {
+ for (k = 0; k <=7; k++)
+ {
+ if (dimmInfo->suportedCasLatencies & (1 << k))
+ DP(printf("%d, ", k+1));
+ }
+
+ }
+ else /* DDR-RAM*/
+ {
+ if (dimmInfo->suportedCasLatencies & 1)
+ DP(printf("1, "));
+ if (dimmInfo->suportedCasLatencies & 2)
+ DP(printf("1.5, "));
+ if (dimmInfo->suportedCasLatencies & 4)
+ DP(printf("2, "));
+ if (dimmInfo->suportedCasLatencies & 8)
+ DP(printf("2.5, "));
+ if (dimmInfo->suportedCasLatencies & 16)
+ DP(printf("3, "));
+ if (dimmInfo->suportedCasLatencies & 32)
+ DP(printf("3.5, "));
+
+ }
+ DP(printf("\n"));
+#endif
+ /* Calculating MAX CAS latency */
+ for(j = 7 ; j > 0 ; j--)
+ {
+ if(((dimmInfo->suportedCasLatencies >> j) & 0x1) == 1)
+ {
+ switch(dimmInfo->memoryType)
+ {
+ case DDR:
+ /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
+ switch (j)
+ {
+ case 7:
+ DP(printf("Max. Cas Latencies (DDR): ERROR !!!\n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_FAULT;
+ hang();
+ break;
+ case 6:
+ DP(printf("Max. Cas Latencies (DDR): ERROR !!!\n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_FAULT;
+ hang();
+ break;
+ case 5:
+ DP(printf("Max. Cas Latencies (DDR): 3.5 clk's\n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_3_5;
+ break;
+ case 4:
+ DP(printf("Max. Cas Latencies (DDR): 3 clk's \n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_3;
+ break;
+ case 3:
+ DP(printf("Max. Cas Latencies (DDR): 2.5 clk's \n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_2_5;
+ break;
+ case 2:
+ DP(printf("Max. Cas Latencies (DDR): 2 clk's \n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_2;
+ break;
+ case 1:
+ DP(printf("Max. Cas Latencies (DDR): 1.5 clk's \n"));
+ dimmInfo->maxClSupported_DDR = DDR_CL_1_5;
+ break;
+ }
+ dimmInfo->maxCASlatencySupported_LoP = 1 + (int) (5 * j /10);
+ if (((5*j) % 10) != 0)
+ dimmInfo->maxCASlatencySupported_RoP = 5;
+ else
+ dimmInfo->maxCASlatencySupported_RoP = 0;
+ DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP));
+ break;
+ case SDRAM:
+ /* CAS latency 1, 2, 3, 4, 5, 6, 7 */
+ dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */
+ DP(printf("Max. Cas Latencies (SD): %d\n", dimmInfo->maxClSupported_SD));
+ dimmInfo->maxCASlatencySupported_LoP = j ;
+ dimmInfo->maxCASlatencySupported_RoP = 0;
+ DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP));
+ break;
+ }
+ break;
+ }
+ }
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 21: /* Buffered Address And Control Inputs */
+ DP(printf("\nModul Attributes (SPD Byte 21): \n"));
+ dimmInfo->bufferedAddrAndControlInputs = data[i] & BIT0;
+ dimmInfo->registeredAddrAndControlInputs = (data[i] & BIT1) >> 1;
+ dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
+ dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
+ dimmInfo->registeredDQMBinputs = (data[i] & BIT4) >> 4;
+ dimmInfo->differentialClockInput = (data[i] & BIT5) >> 5;
+ dimmInfo->redundantRowAddressing = (data[i] & BIT6) >> 6;
+#ifdef DEBUG
+ if (dimmInfo->bufferedAddrAndControlInputs == 1)
+ DP(printf(" - Buffered Address/Control Input: Yes \n"));
+ else
+ DP(printf(" - Buffered Address/Control Input: No \n"));
+
+ if (dimmInfo->registeredAddrAndControlInputs == 1)
+ DP(printf(" - Registered Address/Control Input: Yes \n"));
+ else
+ DP(printf(" - Registered Address/Control Input: No \n"));
+
+ if (dimmInfo->onCardPLL == 1)
+ DP(printf(" - On-Card PLL (clock): Yes \n"));
+ else
+ DP(printf(" - On-Card PLL (clock): No \n"));
+
+ if (dimmInfo->bufferedDQMBinputs == 1)
+ DP(printf(" - Bufferd DQMB Inputs: Yes \n"));
+ else
+ DP(printf(" - Bufferd DQMB Inputs: No \n"));
+
+ if (dimmInfo->registeredDQMBinputs == 1)
+ DP(printf(" - Registered DQMB Inputs: Yes \n"));
+ else
+ DP(printf(" - Registered DQMB Inputs: No \n"));
+
+ if (dimmInfo->differentialClockInput == 1)
+ DP(printf(" - Differential Clock Input: Yes \n"));
+ else
+ DP(printf(" - Differential Clock Input: No \n"));
+
+ if (dimmInfo->redundantRowAddressing == 1)
+ DP(printf(" - redundant Row Addressing: Yes \n"));
+ else
+ DP(printf(" - redundant Row Addressing: No \n"));
+
+#endif
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 22: /* Suported AutoPreCharge */
+ DP(printf("\nModul Attributes (SPD Byte 22): \n"));
+ dimmInfo->suportedEarlyRasPreCharge= data[i] & BIT0;
+ dimmInfo->suportedAutoPreCharge = (data[i] & BIT1) >> 1;
+ dimmInfo->suportedPreChargeAll = (data[i] & BIT2) >> 2;
+ dimmInfo->suportedWrite1ReadBurst= (data[i] & BIT3) >> 3;
+ dimmInfo->suported5PercentLowVCC= (data[i] & BIT4) >> 4;
+ dimmInfo->suported5PercentUpperVCC= (data[i] & BIT5) >> 5;
+#ifdef DEBUG
+ if (dimmInfo->suportedEarlyRasPreCharge == 1)
+ DP(printf(" - Early Ras Precharge: Yes \n"));
+ else
+ DP(printf(" - Early Ras Precharge: No \n"));
+
+ if (dimmInfo->suportedAutoPreCharge == 1)
+ DP(printf(" - AutoPreCharge: Yes \n"));
+ else
+ DP(printf(" - AutoPreCharge: No \n"));
+
+ if (dimmInfo->suportedPreChargeAll == 1)
+ DP(printf(" - Precharge All: Yes \n"));
+ else
+ DP(printf(" - Precharge All: No \n"));
+
+ if (dimmInfo->suportedWrite1ReadBurst == 1)
+ DP(printf(" - Write 1/ReadBurst: Yes \n"));
+ else
+ DP(printf(" - Write 1/ReadBurst: No \n"));
+
+ if (dimmInfo->suported5PercentLowVCC == 1)
+ DP(printf(" - lower VCC tolerance: 5 Percent \n"));
+ else
+ DP(printf(" - lower VCC tolerance: 10 Percent \n"));
+
+ if (dimmInfo->suported5PercentUpperVCC == 1)
+ DP(printf(" - upper VCC tolerance: 5 Percent \n"));
+ else
+ DP(printf(" - upper VCC tolerance: 10 Percent \n"));
+
+#endif
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+ shift = (dimmInfo->memoryType == DDR)? 4:2;
+ mult = (dimmInfo->memoryType == DDR)? 10:25;
+ maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
+ maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
+ leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+ rightOfPoint = (data[i] & maskRightOfPoint)* mult;
+ dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = leftOfPoint;
+ dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = rightOfPoint;
+ DP(printf("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint ));
+ /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
+ div = (dimmInfo->memoryType == DDR)? 100:10;
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
+ dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
+ DP(printf("Clock To Data Out (2nd CL value): %d.%2d [ns]\n",leftOfPoint, rightOfPoint ));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+ shift = (dimmInfo->memoryType == DDR)? 4:2;
+ mult = (dimmInfo->memoryType == DDR)? 10:25;
+ maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
+ maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
+ leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+ rightOfPoint = (data[i] & maskRightOfPoint)* mult;
+ dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = leftOfPoint;
+ dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = rightOfPoint;
+ DP(printf("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint ));
+ /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
+ div = (dimmInfo->memoryType == DDR)? 100:10;
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
+ dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
+ DP(printf("Clock To Data Out (3rd CL value): %d.%2d [ns]\n",leftOfPoint, rightOfPoint ));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 27: /* Minimum Row Precharge Time */
+ shift = (dimmInfo->memoryType == DDR)? 2:0;
+ maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
+ maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
+ leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (data[i] & maskRightOfPoint)*25;
+
+ dimmInfo->minRowPrechargeTime = ((leftOfPoint*100) + rightOfPoint); /* measured in n times 10ps Intervals */
+ trp_clocks = (dimmInfo->minRowPrechargeTime + (tmemclk-1)) / tmemclk;
+ DP(printf("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n", tmemclk, tmemclk/100, tmemclk%100 ));
+ DP(printf("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 28: /* Minimum Row Active to Row Active Time */
+ shift = (dimmInfo->memoryType == DDR)? 2:0;
+ maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
+ maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
+ leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (data[i] & maskRightOfPoint)*25;
+
+ dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint); /* measured in 100ns Intervals */
+ trrd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1)) / tmemclk;
+ DP(printf("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 29: /* Minimum Ras-To-Cas Delay */
+ shift = (dimmInfo->memoryType == DDR)? 2:0;
+ maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
+ maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
+ leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (data[i] & maskRightOfPoint)*25;
+
+ dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint); /* measured in 100ns Intervals */
+ trcd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1) )/ tmemclk;
+ DP(printf("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 30: /* Minimum Ras Pulse Width */
+ dimmInfo->minRasPulseWidth = data[i];
+ tras_clocks = (NSto10PS(data[i])+(tmemclk-1)) / tmemclk;
+ DP(printf("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", dimmInfo->minRasPulseWidth, tras_clocks));
+
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 31: /* Module Bank Density */
+ dimmInfo->moduleBankDensity = data[i];
+ DP(printf("Module Bank Density: %d\n", dimmInfo->moduleBankDensity));
+#ifdef DEBUG
+ DP(printf("*** Offered Densities (more than 1 = Multisize-Module): "));
+ {
+ if (dimmInfo->moduleBankDensity & 1)
+ DP(printf("4MB, "));
+ if (dimmInfo->moduleBankDensity & 2)
+ DP(printf("8MB, "));
+ if (dimmInfo->moduleBankDensity & 4)
+ DP(printf("16MB, "));
+ if (dimmInfo->moduleBankDensity & 8)
+ DP(printf("32MB, "));
+ if (dimmInfo->moduleBankDensity & 16)
+ DP(printf("64MB, "));
+ if (dimmInfo->moduleBankDensity & 32)
+ DP(printf("128MB, "));
+ if ((dimmInfo->moduleBankDensity & 64) || (dimmInfo->moduleBankDensity & 128)) {
+ DP(printf("ERROR, "));
+ hang();
+ }
+ }
+ DP(printf("\n"));
+#endif
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 32: /* Address And Command Setup Time (measured in ns/1000) */
+ sign = 1;
+ switch(dimmInfo->memoryType)
+ {
+ case DDR:
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ break;
+ case SDRAM:
+ leftOfPoint = (data[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint = data[i] & 0x70 >> 4;
+ sign = -1;
+ }
+ rightOfPoint = (data[i] & 0x0f);
+ break;
+ }
+ dimmInfo->addrAndCommandSetupTime = (leftOfPoint*100 + rightOfPoint) * sign;
+ DP(printf("Address And Command Setup Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 33: /* Address And Command Hold Time */
+ sign = 1;
+ switch(dimmInfo->memoryType)
+ {
+ case DDR:
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ break;
+ case SDRAM:
+ leftOfPoint = (data[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint = data[i] & 0x70 >> 4;
+ sign = -1;
+ }
+ rightOfPoint = (data[i] & 0x0f) ;
+ break;
+ }
+ dimmInfo->addrAndCommandHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign;
+ DP(printf("Address And Command Hold Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 34: /* Data Input Setup Time */
+ sign = 1;
+ switch(dimmInfo->memoryType)
+ {
+ case DDR:
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ break;
+ case SDRAM:
+ leftOfPoint = (data[i] & 0xf0) >> 4;
+ if( leftOfPoint > 7)
+ {
+ leftOfPoint = data[i] & 0x70 >> 4;
+ sign = -1;
+ }
+ rightOfPoint = (data[i] & 0x0f );
+ break;
+ }
+ dimmInfo->dataInputSetupTime = (leftOfPoint *100 + rightOfPoint) * sign;
+ DP(printf("Data Input Setup Time [ns]: %d.%d\n", sign*leftOfPoint, rightOfPoint));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+
+ case 35: /* Data Input Hold Time */
+ sign = 1;
+ switch(dimmInfo->memoryType)
+ {
+ case DDR:
+ time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ break;
+ case SDRAM:
+ leftOfPoint = (data[i] & 0xf0) >> 4;
+ if( leftOfPoint > 7)
+ {
+ leftOfPoint = data[i] & 0x70 >> 4;
+ sign = -1;
+ }
+ rightOfPoint = (data[i] & 0x0f) ;
+ break;
+ }
+ dimmInfo->dataInputHoldTime = (leftOfPoint *100 + rightOfPoint) * sign;
+ DP(printf("Data Input Hold Time [ns]: %d.%d\n\n", sign*leftOfPoint, rightOfPoint));
+ break;
+/*------------------------------------------------------------------------------------------------------------------------------*/
+ }
+ }
+ /* calculating the sdram density */
+ for(i = 0;i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;i++)
+ {
+ density = density*2;
+ }
+ dimmInfo->deviceDensity = density*dimmInfo->numOfBanksOnEachDevice*
+ dimmInfo->sdramWidth;
+ dimmInfo->numberOfDevices = (dimmInfo->dataWidth / dimmInfo->sdramWidth)*
+ dimmInfo->numOfModuleBanks;
+ devicesForErrCheck = (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth ;
+ if((dimmInfo->errorCheckType == 0x1) ||
+ (dimmInfo->errorCheckType == 0x2) ||
+ (dimmInfo->errorCheckType == 0x3))
+ {
+ dimmInfo->size = (dimmInfo->deviceDensity / 8)*
+ (dimmInfo->numberOfDevices - devicesForErrCheck);
+ }
+ else
+ {
+ dimmInfo->size = (dimmInfo->deviceDensity/8)*dimmInfo->numberOfDevices;
+ }
+
+ /* compute the module DRB size */
+ tmp = (1 << (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
+ tmp *= dimmInfo->numOfModuleBanks;
+ tmp *= dimmInfo->sdramWidth;
+ tmp = tmp >> 24; /* div by 0x4000000 (64M) */
+ dimmInfo->drb_size = (uchar)tmp;
+ DP(printf("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
+
+ /* try a CAS latency of 3 first... */
+
+ /* bit 1 is CL2, bit 2 is CL3 */
+ supp_cal = (dimmInfo->suportedCasLatencies & 0x1c) >> 1;
+
+ cal_val = 0;
+ if (supp_cal & 8) {
+ if (NS10to10PS(data[9]) <= tmemclk)
+ cal_val = 6;
+ }
+ if (supp_cal & 4) {
+ if (NS10to10PS(data[9]) <= tmemclk)
+ cal_val = 5;
+ }
+
+ /* then 2... */
+ if (supp_cal & 2) {
+ if (NS10to10PS(data[23]) <= tmemclk)
+ cal_val = 4;
+ }
+
+ DP(printf("cal_val = %d\n", cal_val*5));
+
+ /* bummer, did't work... */
+ if (cal_val == 0) {
+ DP(printf("Couldn't find a good CAS latency\n"));
+ hang();
+ return 0;
+ }
+
+ return true;
+}
+
+/* sets up the GT properly with information passed in */
+int
+setup_sdram(AUX_MEM_DIMM_INFO *info)
+{
+ ulong tmp, check;
+ ulong tmp_sdram_mode=0; /* 0x141c*/
+ ulong tmp_dunit_control_low=0; /* 0x1404*/
+ int i;
+
+ /* sanity checking */
+ if (! info->numOfModuleBanks) {
+ printf("setup_sdram called with 0 banks\n");
+ return 1;
+ }
+
+ /* delay line */
+
+ /* Program the GT with the discovered data */
+ if (info->registeredAddrAndControlInputs == true)
+ DP(printf("Module is registered, but we do not support registered Modules !!!\n"));
+
+
+ /* delay line */
+ set_dfcdlInit(); /* may be its not needed */
+ DP(printf("Delay line set done\n"));
+
+ /* set SDRAM mode NOP*/ /* To_do check it*/
+ GT_REG_WRITE(SDRAM_OPERATION, 0x5);
+ while (GTREGREAD(SDRAM_OPERATION) != 0) {
+ DP(printf("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
+ }
+
+ /* SDRAM configuration */
+ GT_REG_WRITE(SDRAM_CONFIG, 0x58200400);
+ DP(printf("sdram_conf 0x1400: %08x\n", GTREGREAD(SDRAM_CONFIG)));
+
+ /* SDRAM open pages controll keep open as much as I can*/
+ GT_REG_WRITE(SDRAM_OPEN_PAGES_CONTROL, 0x0);
+ DP(printf("sdram_open_pages_controll 0x1414: %08x\n", GTREGREAD(SDRAM_OPEN_PAGES_CONTROL)));
+
+
+ /* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
+ tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset*/
+ if (tmp == 0)
+ DP(printf("Core Signals are sync (by HW-Setting)!!!\n"));
+ else
+ DP(printf("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
+
+ /* SDRAM set CAS Lentency according to SPD information*/
+ switch(info->memoryType)
+ {
+ case SDRAM:
+ DP(printf("### SD-RAM not supported yet !!!\n"));
+ hang();
+ /* ToDo fill SD-RAM if needed !!!!!*/
+ break;
+
+ case DDR:
+ DP(printf("### SET-CL for DDR-RAM\n"));
+
+ switch (info->maxClSupported_DDR)
+ {
+ case DDR_CL_3:
+ tmp_dunit_control_low = 0x3c000000; /* Read-Data sampled on falling edge of Clk*/
+ tmp_sdram_mode = 0x32; /* CL=3 Burstlength = 4*/
+ DP(printf("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ break;
+
+ case DDR_CL_2_5:
+ if (tmp == 1) /* clocks sync*/
+ {
+ tmp_dunit_control_low = 0x24000000; /* Read-Data sampled on falling edge of Clk*/
+ tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4*/
+ DP(printf("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ }
+ else /* clk sync. bypassed */
+ {
+ tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk*/
+ tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4*/
+ DP(printf("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ }
+ break;
+
+ case DDR_CL_2:
+ if (tmp == 1) /* Sync*/
+ {
+ tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk*/
+ tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4*/
+ DP(printf("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ }
+ else /* Not sync. */
+ {
+ tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk*/
+ tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4*/
+ DP(printf("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ }
+ break;
+
+ case DDR_CL_1_5:
+ if (tmp == 1) /* Sync*/
+ {
+ tmp_dunit_control_low = 0x23000000; /* Read-Data sampled on falling edge of Clk*/
+ tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4*/
+ DP(printf("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ }
+ else /* not sync*/
+ {
+ tmp_dunit_control_low = 0x1a000000; /* Read-Data sampled on rising edge of Clk*/
+ tmp_sdram_mode = 0x52; /* CL=1,5 Burstlength = 4*/
+ DP(printf("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+ }
+ break;
+
+ default:
+ printf("Max. CL is out of range %d\n", info->maxClSupported_DDR);
+ hang();
+ break;
+ }
+ break;
+ }
+
+ /* Write results of CL detection procedure */
+ GT_REG_WRITE(SDRAM_MODE, tmp_sdram_mode);
+ /* set SDRAM mode SetCommand 0x1418*/
+ GT_REG_WRITE(SDRAM_OPERATION, 0x3);
+ while (GTREGREAD(SDRAM_OPERATION) != 0) {
+ DP(printf("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+ }
+
+
+ /* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
+ tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); /* Clock Domain Sync from power on reset*/
+ if (tmp != 1) /*clocks are not sync*/
+ {
+ /* asyncmode*/
+ GT_REG_WRITE(D_UNIT_CONTROL_LOW ,
+ (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x18110780 | tmp_dunit_control_low );
+ }
+ else
+ {
+ /* syncmode*/
+ GT_REG_WRITE(D_UNIT_CONTROL_LOW ,
+ (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x00110000 | tmp_dunit_control_low );
+ }
+
+ /* set SDRAM mode SetCommand 0x1418*/
+ GT_REG_WRITE(SDRAM_OPERATION, 0x3);
+ while (GTREGREAD(SDRAM_OPERATION) != 0) {
+ DP(printf("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
+ }
+
+/*------------------------------------------------------------------------------ */
+
+
+ /* bank parameters */
+ /* SDRAM address decode register */
+ /* program this with the default value */
+ tmp = 0x02;
+
+
+ DP(printf("drb_size (n*64Mbit): %d\n", info->drb_size));
+ switch (info->drb_size) {
+ case 1: /* 64 Mbit */
+ case 2: /* 128 Mbit */
+ DP(printf("RAM-Device_size 64Mbit or 128Mbit)\n"));
+ tmp |= (0x00 << 4);
+ break;
+ case 4: /* 256 Mbit */
+ case 8: /* 512 Mbit */
+ DP(printf("RAM-Device_size 256Mbit or 512Mbit)\n"));
+ tmp |= (0x01 << 4);
+ break;
+ case 16: /* 1 Gbit */
+ case 32: /* 2 Gbit */
+ DP(printf("RAM-Device_size 1Gbit or 2Gbit)\n"));
+ tmp |= (0x02 << 4);
+ break;
+ default:
+ printf("Error in dram size calculation\n");
+ DP(printf("Assume: RAM-Device_size 1Gbit or 2Gbit)\n"));
+ tmp |= (0x02 << 4);
+ return 1;
+ }
+
+ /* SDRAM bank parameters */
+ /* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
+ DP(printf("setting up slot %d config with: %08lx \n", info->slot, tmp));
+ GT_REG_WRITE(SDRAM_ADDR_CONTROL, tmp);
+
+/* ------------------------------------------------------------------------------ */
+
+ DP(printf("setting up sdram_timing_control_low with: %08x \n", 0x11511220));
+ GT_REG_WRITE(SDRAM_TIMING_CONTROL_LOW, 0x11511220);
+
+
+/* ------------------------------------------------------------------------------ */
+
+ /* SDRAM configuration */
+ tmp = GTREGREAD(SDRAM_CONFIG);
+
+ if (info->registeredAddrAndControlInputs || info->registeredDQMBinputs) {
+ tmp |= (1 << 17);
+ DP(printf("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",info->registeredAddrAndControlInputs, info->registeredDQMBinputs));
+ }
+
+ /* Use buffer 1 to return read data to the CPU
+ * Page 426 MV64360 */
+ tmp |= (1 << 26);
+ DP(printf("Before Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG)));
+ DP(printf("After Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG)));
+
+ /* SDRAM timing To_do:*/
+
+
+ tmp = GTREGREAD(SDRAM_TIMING_CONTROL_HIGH);
+ DP(printf("# sdram_timing_control_high is : %08lx \n", tmp));
+
+ /* SDRAM address decode register */
+ /* program this with the default value */
+ tmp = GTREGREAD(SDRAM_ADDR_CONTROL);
+ DP(printf("SDRAM address control (before: decode): %08x ", GTREGREAD(SDRAM_ADDR_CONTROL)));
+ GT_REG_WRITE(SDRAM_ADDR_CONTROL, (tmp | 0x2));
+ DP(printf("SDRAM address control (after: decode): %08x\n", GTREGREAD(SDRAM_ADDR_CONTROL)));
+
+ /* set the SDRAM configuration for each bank */
+
+/* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
+ {
+ i = info->slot;
+ DP(printf("\n*** Running a MRS cycle for bank %d ***\n", i));
+
+ /* map the bank */
+ memory_map_bank(i, 0, GB/4);
+#if 1 /* test only */
+ /* set SDRAM mode */ /* To_do check it*/
+ GT_REG_WRITE(SDRAM_OPERATION, 0x3);
+ check = GTREGREAD(SDRAM_OPERATION);
+ DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check));
+
+
+ /* switch back to normal operation mode */
+ GT_REG_WRITE(SDRAM_OPERATION, 0);
+ check = GTREGREAD(SDRAM_OPERATION);
+ DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check));
+#endif /* test only */
+ /* unmap the bank */
+ memory_map_bank(i, 0, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+long int
+dram_size(long int *base, long int maxsize)
+{
+ volatile long int *addr, *b=base;
+ long int cnt, val, save1, save2;
+
+#define STARTVAL (1<<20) /* start test at 1M */
+ for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save1=*addr; /* save contents of addr */
+ save2=*b; /* save contents of base */
+
+ *addr=cnt; /* write cnt to addr */
+ *b=0; /* put null at base */
+
+ /* check at base address */
+ if ((*b) != 0) {
+ *addr=save1; /* restore *addr */
+ *b=save2; /* restore *b */
+ return (0);
+ }
+ val = *addr; /* read *addr */
+ val = *addr; /* read *addr */
+
+ *addr=save1;
+ *b=save2;
+
+ if (val != cnt) {
+ DP(printf("Found %08x at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr));
+ /* fix boundary condition.. STARTVAL means zero */
+ if(cnt==STARTVAL/sizeof(long)) cnt=0;
+ return (cnt * sizeof(long));
+ }
+ }
+ return maxsize;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* ppcboot interface function to SDRAM init - this is where all the
+ * controlling logic happens */
+long int
+initdram(int board_type)
+{
+ int s0 = 0, s1 = 0;
+ int checkbank[4] = { [0 ... 3] = 0 };
+ ulong bank_no, realsize, total, check;
+ AUX_MEM_DIMM_INFO dimmInfo1;
+ AUX_MEM_DIMM_INFO dimmInfo2;
+ int nhr;
+
+ /* first, use the SPD to get info about the SDRAM/ DDRRAM */
+
+ /* check the NHR bit and skip mem init if it's already done */
+ nhr = get_hid0() & (1 << 16);
+
+ if (nhr) {
+ printf("Skipping SD- DDRRAM setup due to NHR bit being set\n");
+ } else {
+ /* DIMM0 */
+ s0 = check_dimm(0, &dimmInfo1);
+
+ /* DIMM1 */
+ s1 = check_dimm(1, &dimmInfo2);
+
+ memory_map_bank(0, 0, 0);
+ memory_map_bank(1, 0, 0);
+ memory_map_bank(2, 0, 0);
+ memory_map_bank(3, 0, 0);
+
+ if (dimmInfo1.numOfModuleBanks && setup_sdram(&dimmInfo1)) {
+ printf("Setup for DIMM1 failed.\n");
+ }
+
+ if (dimmInfo2.numOfModuleBanks && setup_sdram(&dimmInfo2)) {
+ printf("Setup for DIMM2 failed.\n");
+ }
+
+ /* set the NHR bit */
+ set_hid0(get_hid0() | (1 << 16));
+ }
+ /* next, size the SDRAM banks */
+
+ realsize = total = 0;
+ check = GB/4;
+ if (dimmInfo1.numOfModuleBanks > 0) {checkbank[0] = 1; printf("-- DIMM1 has 1 bank\n");}
+ if (dimmInfo1.numOfModuleBanks > 1) {checkbank[1] = 1; printf("-- DIMM1 has 2 banks\n");}
+ if (dimmInfo1.numOfModuleBanks > 2)
+ printf("Error, SPD claims DIMM1 has >2 banks\n");
+
+ if (dimmInfo2.numOfModuleBanks > 0) {checkbank[2] = 1; printf("-- DIMM2 has 1 bank\n");}
+ if (dimmInfo2.numOfModuleBanks > 1) {checkbank[3] = 1; printf("-- DIMM2 has 2 banks\n");}
+ if (dimmInfo2.numOfModuleBanks > 2)
+ printf("Error, SPD claims DIMM2 has >2 banks\n");
+
+ for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+ /* skip over banks that are not populated */
+ if (! checkbank[bank_no])
+ continue;
+
+ if ((total + check) > CFG_GT_REGS)
+ check = CFG_GT_REGS - total;
+
+ memory_map_bank(bank_no, total, check);
+ realsize = dram_size((long int *)total, check);
+ memory_map_bank(bank_no, total, realsize);
+
+ total += realsize;
+ }
+
+/* Setup Ethernet DMA Adress window to DRAM Area */
+ return(total);
+}
+
+/* ***************************************************************************************
+! * SDRAM INIT *
+! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
+! * This procedure fits only the Atlantis *
+! * *
+! *************************************************************************************** */
+
+
+/* ***************************************************************************************
+! * DFCDL initialize MV643xx Design Considerations *
+! * *
+! *************************************************************************************** */
+int
+set_dfcdlInit(void)
+{
+ int i;
+ unsigned int dfcdl_word = 0x0000014f;
+ for (i=0 ; i < 64; i++)
+ {
+ GT_REG_WRITE(SRAM_DATA0, dfcdl_word);
+ }
+ GT_REG_WRITE(DFCDL_CONFIG0, 0x00300000); /* enable dynamic delay line updating */
+
+
+ return (0);
+}
+
diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c
new file mode 100644
index 0000000..01adb33
--- /dev/null
+++ b/board/esd/cpci750/serial.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * modified for marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * modified for cpci750 board by
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * serial.c - serial support for esd cpci750 board
+ */
+
+/* supports the MPSC */
+
+#include <common.h>
+#include <command.h>
+#include "../../Marvell/include/memory.h"
+#include "serial.h"
+
+
+#include "mpsc.h"
+
+int serial_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ mpsc_init (gd->baudrate);
+
+ return (0);
+}
+
+void serial_putc (const char c)
+{
+ if (c == '\n')
+ mpsc_putchar ('\r');
+
+ mpsc_putchar (c);
+}
+
+int serial_getc (void)
+{
+ return mpsc_getchar ();
+}
+
+int serial_tstc (void)
+{
+ return mpsc_test_char ();
+}
+
+void serial_setbrg (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
+}
+
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+void kgdb_serial_init (void)
+{
+}
+
+void putDebugChar (int c)
+{
+ serial_putc (c);
+}
+
+void putDebugStr (const char *str)
+{
+ serial_puts (str);
+}
+
+int getDebugChar (void)
+{
+ return serial_getc ();
+}
+
+void kgdb_interruptible (int yes)
+{
+ return;
+}
+#endif /* CFG_CMD_KGDB */
diff --git a/board/esd/cpci750/serial.h b/board/esd/cpci750/serial.h
new file mode 100644
index 0000000..c7fc8c1
--- /dev/null
+++ b/board/esd/cpci750/serial.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * modified for marvell db64360 eval board by
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* serial.h - mostly useful for DUART serial_init in serial.c */
+
+#ifndef __SERIAL_H__
+#define __SERIAL_H__
+
+#if 0
+
+#define B230400 1
+#define B115200 2
+#define B57600 4
+#define B38400 82
+#define B19200 163
+#define B9600 24
+#define B4800 651
+#define B2400 1302
+#define B1200 2604
+#define B600 5208
+#define B300 10417
+#define B150 20833
+#define B110 28409
+#define BDEFAULT B115200
+
+ /* this stuff is important to initialize
+ the DUART channels */
+
+#define Scale 0x01L /* distance between port addresses */
+#define COM1 0x000003f8 /* Keyboard */
+#define COM2 0x000002f8 /* Host */
+
+
+/* Port Definitions relative to base COM port addresses */
+#define DataIn (0x00*Scale) /* data input port */
+#define DataOut (0x00*Scale) /* data output port */
+#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */
+#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */
+#define Ier (0x01*Scale) /* interrupt enable register */
+#define Iir (0x02*Scale) /* interrupt identification register */
+#define Lcr (0x03*Scale) /* line control register */
+#define Mcr (0x04*Scale) /* modem control register */
+#define Lsr (0x05*Scale) /* line status register */
+#define Msr (0x06*Scale) /* modem status register */
+
+/* Bit Definitions for above ports */
+#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */
+#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */
+
+#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */
+#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */
+#define McrDflt (McrRts|McrDtr)
+
+#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/
+ /* b6: transmitter empty */
+#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */
+
+#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */
+#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */
+#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */
+
+#define IerRda 0xf /* b0: Enable received data available interrupt */
+
+#endif
+
+#endif /* __SERIAL_H__ */
diff --git a/board/esd/cpci750/strataflash.c b/board/esd/cpci750/strataflash.c
new file mode 100644
index 0000000..c22fe5d
--- /dev/null
+++ b/board/esd/cpci750/strataflash.c
@@ -0,0 +1,763 @@
+/*
+ * (C) Copyright 2002
+ * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+#undef DEBUG_FLASH
+/*
+ * This file implements a Common Flash Interface (CFI) driver for U-Boot.
+ * The width of the port and the width of the chips are determined at initialization.
+ * These widths are used to calculate the address for access CFI data structures.
+ * It has been tested on an Intel Strataflash implementation.
+ *
+ * References
+ * JEDEC Standard JESD68 - Common Flash Interface (CFI)
+ * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
+ * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
+ * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
+ *
+ * TODO
+ * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
+ * Add support for other command sets Use the PRI and ALT to determine command set
+ * Verify erase and program timeouts.
+ */
+
+#define FLASH_CMD_CFI 0x98
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_CMD_RESET 0xff
+#define FLASH_CMD_BLOCK_ERASE 0x20
+#define FLASH_CMD_ERASE_CONFIRM 0xD0
+#define FLASH_CMD_WRITE 0x40
+#define FLASH_CMD_PROTECT 0x60
+#define FLASH_CMD_PROTECT_SET 0x01
+#define FLASH_CMD_PROTECT_CLEAR 0xD0
+#define FLASH_CMD_CLEAR_STATUS 0x50
+#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
+#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
+
+#define FLASH_STATUS_DONE 0x80
+#define FLASH_STATUS_ESS 0x40
+#define FLASH_STATUS_ECLBS 0x20
+#define FLASH_STATUS_PSLBS 0x10
+#define FLASH_STATUS_VPENS 0x08
+#define FLASH_STATUS_PSS 0x04
+#define FLASH_STATUS_DPS 0x02
+#define FLASH_STATUS_R 0x01
+#define FLASH_STATUS_PROTECT 0x01
+
+#define FLASH_OFFSET_CFI 0x55
+#define FLASH_OFFSET_CFI_RESP 0x10
+#define FLASH_OFFSET_WTOUT 0x1F
+#define FLASH_OFFSET_WBTOUT 0x20
+#define FLASH_OFFSET_ETOUT 0x21
+#define FLASH_OFFSET_CETOUT 0x22
+#define FLASH_OFFSET_WMAX_TOUT 0x23
+#define FLASH_OFFSET_WBMAX_TOUT 0x24
+#define FLASH_OFFSET_EMAX_TOUT 0x25
+#define FLASH_OFFSET_CEMAX_TOUT 0x26
+#define FLASH_OFFSET_SIZE 0x27
+#define FLASH_OFFSET_INTERFACE 0x28
+#define FLASH_OFFSET_BUFFER_SIZE 0x2A
+#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
+#define FLASH_OFFSET_ERASE_REGIONS 0x2D
+#define FLASH_OFFSET_PROTECT 0x02
+#define FLASH_OFFSET_USER_PROTECTION 0x85
+#define FLASH_OFFSET_INTEL_PROTECTION 0x81
+
+
+#define FLASH_MAN_CFI 0x01000000
+
+
+typedef union {
+ unsigned char c;
+ unsigned short w;
+ unsigned long l;
+} cfiword_t;
+
+typedef union {
+ unsigned char * cp;
+ unsigned short *wp;
+ unsigned long *lp;
+} cfiptr_t;
+
+#define NUM_ERASE_REGIONS 4
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
+static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_detect_cfi(flash_info_t * info);
+static ulong flash_get_size (ulong base, int banknum);
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
+static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
+#endif
+/*-----------------------------------------------------------------------
+ * create an address based on the offset and the port width
+ */
+inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
+{
+ return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
+}
+/*-----------------------------------------------------------------------
+ * read a character at a port width address
+ */
+inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
+{
+ uchar *cp;
+ cp = flash_make_addr(info, 0, offset);
+ return (cp[info->portwidth - 1]);
+}
+
+/*-----------------------------------------------------------------------
+ * read a short word by swapping for ppc format.
+ */
+ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
+{
+ uchar * addr;
+
+ addr = flash_make_addr(info, sect, offset);
+ return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ * read a long word by picking the least significant byte of each maiximum
+ * port size word. Swap for ppc format.
+ */
+ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
+{
+ uchar * addr;
+
+ addr = flash_make_addr(info, sect, offset);
+ return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
+ (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+ unsigned long address;
+
+
+ /* The flash is positioned back to back, with the demultiplexing of the chip
+ * based on the A24 address line.
+ *
+ */
+
+ address = CFG_FLASH_BASE;
+ size = 0;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ size += flash_info[i].size = flash_get_size(address, i);
+ address += CFG_FLASH_INCREMENT;
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
+ flash_info[0].size, flash_info[i].size<<20);
+ }
+ }
+
+#if 0 /* test-only */
+ /* Monitor protection ON by default */
+#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+ for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++)
+ (void)flash_real_protect(&flash_info[0], i, 1);
+#endif
+#endif
+
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int rcode = 0;
+ int prot;
+ int sect;
+
+ if( info->flash_id != FLASH_MAN_CFI) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+ if ((s_first < 0) || (s_first > s_last)) {
+ printf ("- no sectors to erase\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
+ flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+
+ if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
+ rcode = 1;
+ } else
+ printf(".");
+ }
+ }
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id != FLASH_MAN_CFI) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ printf("CFI conformant FLASH (%d x %d)",
+ (info->portwidth << 3 ), (info->chipwidth << 3 ));
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+ printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
+ info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n");
+ printf (" %08lX%5s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong wp;
+ ulong cp;
+ int aln;
+ cfiword_t cword;
+ int i, rc;
+
+ /* get lower aligned address */
+ wp = (addr & ~(info->portwidth - 1));
+
+ /* handle unaligned start */
+ if((aln = addr - wp) != 0) {
+ cword.l = 0;
+ cp = wp;
+ for(i=0;i<aln; ++i, ++cp)
+ flash_add_byte(info, &cword, (*(uchar *)cp));
+
+ for(; (i< info->portwidth) && (cnt > 0) ; i++) {
+ flash_add_byte(info, &cword, *src++);
+ cnt--;
+ cp++;
+ }
+ for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
+ flash_add_byte(info, &cword, (*(uchar *)cp));
+ if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+ return rc;
+ wp = cp;
+ }
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+ while(cnt >= info->portwidth) {
+ i = info->buffer_size > cnt? cnt: info->buffer_size;
+ if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
+ return rc;
+ wp += i;
+ src += i;
+ cnt -=i;
+ }
+#else
+ /* handle the aligned part */
+ while(cnt >= info->portwidth) {
+ cword.l = 0;
+ for(i = 0; i < info->portwidth; i++) {
+ flash_add_byte(info, &cword, *src++);
+ }
+ if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+ return rc;
+ wp += info->portwidth;
+ cnt -= info->portwidth;
+ }
+#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ cword.l = 0;
+ for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
+ flash_add_byte(info, &cword, *src++);
+ --cnt;
+ }
+ for (; i<info->portwidth; ++i, ++cp) {
+ flash_add_byte(info, & cword, (*(uchar *)cp));
+ }
+
+ return flash_write_cfiword(info, wp, cword);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+ int retcode = 0;
+
+ flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
+ if(prot)
+ flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
+ else
+ flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
+
+ if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
+ prot?"protect":"unprotect")) == 0) {
+
+ info->protect[sector] = prot;
+ /* Intel's unprotect unprotects all locking */
+ if(prot == 0) {
+ int i;
+ for(i = 0 ; i<info->sector_count; i++) {
+ if(info->protect[i])
+ flash_real_protect(info, i, 1);
+ }
+ }
+ }
+
+ return retcode;
+}
+/*-----------------------------------------------------------------------
+ * wait for XSR.7 to be set. Time out with an error if it does not.
+ * This routine does not set the flash to read-array mode.
+ */
+static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+{
+ ulong start;
+
+ /* Wait for command completion */
+ start = get_timer (0);
+ while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
+ if (get_timer(start) > info->erase_blk_tout) {
+ printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+ return ERR_TIMOUT;
+ }
+ }
+ return ERR_OK;
+}
+/*-----------------------------------------------------------------------
+ * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
+ * This routine sets the flash to read-array mode.
+ */
+static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+{
+ int retcode;
+ retcode = flash_status_check(info, sector, tout, prompt);
+ if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
+ retcode = ERR_INVAL;
+ printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
+ if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
+ printf("Command Sequence Error.\n");
+ } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
+ printf("Block Erase Error.\n");
+ retcode = ERR_NOT_ERASED;
+ } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
+ printf("Locking Error\n");
+ }
+ if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
+ printf("Block locked.\n");
+ retcode = ERR_PROTECTED;
+ }
+ if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
+ printf("Vpp Low Error.\n");
+ }
+ flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+ return retcode;
+}
+/*-----------------------------------------------------------------------
+ */
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
+{
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cword->c = c;
+ break;
+ case FLASH_CFI_16BIT:
+ cword->w = (cword->w << 8) | c;
+ break;
+ case FLASH_CFI_32BIT:
+ cword->l = (cword->l << 8) | c;
+ }
+}
+
+
+/*-----------------------------------------------------------------------
+ * make a proper sized command based on the port and chip widths
+ */
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
+{
+ int i;
+ uchar *cp = (uchar *)cmdbuf;
+ for(i=0; i< info->portwidth; i++)
+ *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
+}
+
+/*
+ * Write a proper sized command to the correct address
+ */
+static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+
+ volatile cfiptr_t addr;
+ cfiword_t cword;
+ addr.cp = flash_make_addr(info, sect, offset);
+ flash_make_cmd(info, cmd, &cword);
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ *addr.cp = cword.c;
+ break;
+ case FLASH_CFI_16BIT:
+ *addr.wp = cword.w;
+ break;
+ case FLASH_CFI_32BIT:
+ *addr.lp = cword.l;
+ break;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+ cfiptr_t cptr;
+ cfiword_t cword;
+ int retval;
+ cptr.cp = flash_make_addr(info, sect, offset);
+ flash_make_cmd(info, cmd, &cword);
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ retval = (cptr.cp[0] == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ retval = (cptr.wp[0] == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ retval = (cptr.lp[0] == cword.l);
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+}
+/*-----------------------------------------------------------------------
+ */
+static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+ cfiptr_t cptr;
+ cfiword_t cword;
+ int retval;
+ cptr.cp = flash_make_addr(info, sect, offset);
+ flash_make_cmd(info, cmd, &cword);
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ retval = ((cptr.cp[0] & cword.c) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ retval = ((cptr.wp[0] & cword.w) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ retval = ((cptr.lp[0] & cword.l) == cword.l);
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+}
+
+/*-----------------------------------------------------------------------
+ * detect if flash is compatible with the Common Flash Interface (CFI)
+ * http://www.jedec.org/download/search/jesd68.pdf
+ *
+ */
+static int flash_detect_cfi(flash_info_t * info)
+{
+
+ for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
+ info->portwidth <<= 1) {
+ for(info->chipwidth =FLASH_CFI_BY8;
+ info->chipwidth <= info->portwidth;
+ info->chipwidth <<= 1) {
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
+ if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
+ flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
+ flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
+ return 1;
+ }
+ }
+ return 0;
+}
+/*
+ * The following code cannot be run from FLASH!
+ *
+ */
+static ulong flash_get_size (ulong base, int banknum)
+{
+ flash_info_t * info = &flash_info[banknum];
+ int i, j;
+ int sect_cnt;
+ unsigned long sector;
+ unsigned long tmp;
+ int size_ratio = 0;
+ uchar num_erase_regions;
+ int erase_region_size;
+ int erase_region_count;
+
+ info->start[0] = base;
+
+ invalidate_dcache_range(base, base+0x400);
+
+ if(flash_detect_cfi(info)){
+
+ size_ratio = info->portwidth / info->chipwidth;
+ num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
+
+ sect_cnt = 0;
+ sector = base;
+ for(i = 0 ; i < num_erase_regions; i++) {
+ if(i > NUM_ERASE_REGIONS) {
+ printf("%d erase regions found, only %d used\n",
+ num_erase_regions, NUM_ERASE_REGIONS);
+ break;
+ }
+ tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
+ erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
+ tmp >>= 16;
+ erase_region_count = (tmp & 0xffff) +1;
+ for(j = 0; j< erase_region_count; j++) {
+ info->start[sect_cnt] = sector;
+ sector += (erase_region_size * size_ratio);
+ info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
+ sect_cnt++;
+ }
+ }
+
+ info->sector_count = sect_cnt;
+ /* multiply the size by the number of chips */
+ info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
+ info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
+ tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
+ info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
+ tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
+ info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
+ tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
+ info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
+ info->flash_id = FLASH_MAN_CFI;
+ }
+
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+#ifdef DEBUG_FLASH
+ printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
+#endif
+#ifdef DEBUG_FLASH
+ printf("found %d erase regions\n", num_erase_regions);
+#endif
+#ifdef DEBUG_FLASH
+ printf("size=%08x sectors=%08x \n", info->size, info->sector_count);
+#endif
+ return(info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
+{
+
+ cfiptr_t ctladdr;
+ cfiptr_t cptr;
+ int flag;
+
+ ctladdr.cp = flash_make_addr(info, 0, 0);
+ cptr.cp = (uchar *)dest;
+
+
+ /* Check if Flash is (sufficiently) erased */
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ flag = ((cptr.cp[0] & cword.c) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ flag = ((cptr.wp[0] & cword.w) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ flag = ((cptr.lp[0] & cword.l) == cword.l);
+ break;
+ default:
+ return 2;
+ }
+ if(!flag)
+ return 2;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
+
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cptr.cp[0] = cword.c;
+ break;
+ case FLASH_CFI_16BIT:
+ cptr.wp[0] = cword.w;
+ break;
+ case FLASH_CFI_32BIT:
+ cptr.lp[0] = cword.l;
+ break;
+ }
+
+ /* re-enable interrupts if necessary */
+ if(flag)
+ enable_interrupts();
+
+ return flash_full_status_check(info, 0, info->write_tout, "write");
+}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+
+/* loop through the sectors from the highest address
+ * when the passed address is greater or equal to the sector address
+ * we have a match
+ */
+static int find_sector(flash_info_t *info, ulong addr)
+{
+ int sector;
+ for(sector = info->sector_count - 1; sector >= 0; sector--) {
+ if(addr >= info->start[sector])
+ break;
+ }
+ return sector;
+}
+
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
+{
+
+ int sector;
+ int cnt;
+ int retcode;
+ volatile cfiptr_t src;
+ volatile cfiptr_t dst;
+
+ src.cp = cp;
+ dst.cp = (uchar *)dest;
+ sector = find_sector(info, dest);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+ if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
+ "write to buffer")) == ERR_OK) {
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cnt = len;
+ break;
+ case FLASH_CFI_16BIT:
+ cnt = len >> 1;
+ break;
+ case FLASH_CFI_32BIT:
+ cnt = len >> 2;
+ break;
+ default:
+ return ERR_INVAL;
+ break;
+ }
+ flash_write_cmd(info, sector, 0, (uchar)cnt-1);
+ while(cnt-- > 0) {
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ *dst.cp++ = *src.cp++;
+ break;
+ case FLASH_CFI_16BIT:
+ *dst.wp++ = *src.wp++;
+ break;
+ case FLASH_CFI_32BIT:
+ *dst.lp++ = *src.lp++;
+ break;
+ default:
+ return ERR_INVAL;
+ break;
+ }
+ }
+ flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
+ retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
+ "buffer write");
+ }
+ flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ return retcode;
+}
+#endif /* CFG_USE_FLASH_BUFFER_WRITE */
diff --git a/board/esd/cpci750/u-boot.lds b/board/esd/cpci750/u-boot.lds
new file mode 100644
index 0000000..0dfa8c0
--- /dev/null
+++ b/board/esd/cpci750/u-boot.lds
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/74xx_7xx/start.o (.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/* . = env_offset; */
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}