summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/isp116x-hcd.c1412
-rw-r--r--drivers/isp116x.h489
-rw-r--r--include/usb.h5
4 files changed, 1906 insertions, 2 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index 0ca400c..52cd388 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -31,7 +31,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o \
- i8042.o inca-ip_sw.o keyboard.o \
+ i8042.o inca-ip_sw.o isp116x-hcd.o keyboard.o \
lan91c96.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
diff --git a/drivers/isp116x-hcd.c b/drivers/isp116x-hcd.c
new file mode 100644
index 0000000..d57b8ec
--- /dev/null
+++ b/drivers/isp116x-hcd.c
@@ -0,0 +1,1412 @@
+/*
+ * ISP116x HCD (Host Controller Driver) for u-boot.
+ *
+ * Copyright (C) 2006-2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2006-2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c"
+ * (original copyright message follows):
+ *
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This code is based on linux driver for sl811hs chip, source at
+ * drivers/usb/host/sl811.c:
+ *
+ * SL811 Host Controller Interface driver for USB.
+ *
+ * Copyright (c) 2003/06, Courage Co., Ltd.
+ *
+ * Based on:
+ * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
+ * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
+ * Adam Richter, Gregory P. Smith;
+ * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
+ * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
+ *
+ * [[GNU/GPL disclaimer]]
+ *
+ * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c"
+ * (original copyright message follows):
+ *
+ * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
+ *
+ * (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * [[GNU/GPL disclaimer]]
+ *
+ * Note: Part of this code has been derived from linux
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_ISP116X_HCD
+#include <asm/io.h>
+#include <usb.h>
+#include <malloc.h>
+#include <linux/list.h>
+
+/*
+ * ISP116x chips require certain delays between accesses to its
+ * registers. The following timing options exist.
+ *
+ * 1. Configure your memory controller (the best)
+ * 2. Use ndelay (easiest, poorest). For that, enable the following macro.
+ *
+ * Value is in microseconds.
+ */
+#ifdef ISP116X_HCD_USE_UDELAY
+#define UDELAY 1
+#endif
+
+/*
+ * On some (slowly?) machines an extra delay after data packing into
+ * controller's FIFOs is required, * otherwise you may get the following
+ * error:
+ *
+ * uboot> usb start
+ * (Re)start USB...
+ * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT
+ * isp116x: isp116x_submit_job: ****** FIFO not ready! ******
+ *
+ * USB device not responding, giving up (status=4)
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * 3 USB Device(s) found
+ * scanning bus for storage devices... 0 Storage Device(s) found
+ *
+ * Value is in milliseconds.
+ */
+#ifdef ISP116X_HCD_USE_EXTRA_DELAY
+#define EXTRA_DELAY 2
+#endif
+
+/*
+ * Enable the following defines if you wish enable debugging messages.
+ */
+#undef DEBUG /* enable debugging messages */
+#undef TRACE /* enable tracing code */
+#undef VERBOSE /* verbose debugging messages */
+
+#include "isp116x.h"
+
+#define DRIVER_VERSION "08 Jan 2007"
+static const char hcd_name[] = "isp116x-hcd";
+
+struct isp116x isp116x_dev;
+struct isp116x_platform_data isp116x_board;
+int got_rhsc = 0; /* root hub status change */
+struct usb_device *devgone; /* device which was disconnected */
+int rh_devnum = 0; /* address of Root Hub endpoint */
+
+/* ------------------------------------------------------------------------- */
+
+#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL))
+#define min_t(type,x,y) \
+ ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+/* ------------------------------------------------------------------------- */
+
+static int isp116x_reset(struct isp116x *isp116x);
+
+/* --- Debugging functions ------------------------------------------------- */
+
+#define isp116x_show_reg(d, r) { \
+ if ((r) < 0x20) { \
+ DBG("%-12s[%02x]: %08x", #r, \
+ r, isp116x_read_reg32(d, r)); \
+ } else { \
+ DBG("%-12s[%02x]: %04x", #r, \
+ r, isp116x_read_reg16(d, r)); \
+ } \
+}
+
+#define isp116x_show_regs(d) { \
+ isp116x_show_reg(d, HCREVISION); \
+ isp116x_show_reg(d, HCCONTROL); \
+ isp116x_show_reg(d, HCCMDSTAT); \
+ isp116x_show_reg(d, HCINTSTAT); \
+ isp116x_show_reg(d, HCINTENB); \
+ isp116x_show_reg(d, HCFMINTVL); \
+ isp116x_show_reg(d, HCFMREM); \
+ isp116x_show_reg(d, HCFMNUM); \
+ isp116x_show_reg(d, HCLSTHRESH); \
+ isp116x_show_reg(d, HCRHDESCA); \
+ isp116x_show_reg(d, HCRHDESCB); \
+ isp116x_show_reg(d, HCRHSTATUS); \
+ isp116x_show_reg(d, HCRHPORT1); \
+ isp116x_show_reg(d, HCRHPORT2); \
+ isp116x_show_reg(d, HCHWCFG); \
+ isp116x_show_reg(d, HCDMACFG); \
+ isp116x_show_reg(d, HCXFERCTR); \
+ isp116x_show_reg(d, HCuPINT); \
+ isp116x_show_reg(d, HCuPINTENB); \
+ isp116x_show_reg(d, HCCHIPID); \
+ isp116x_show_reg(d, HCSCRATCH); \
+ isp116x_show_reg(d, HCITLBUFLEN); \
+ isp116x_show_reg(d, HCATLBUFLEN); \
+ isp116x_show_reg(d, HCBUFSTAT); \
+ isp116x_show_reg(d, HCRDITL0LEN); \
+ isp116x_show_reg(d, HCRDITL1LEN); \
+}
+
+#if defined(TRACE)
+
+static int isp116x_get_current_frame_number(struct usb_device *usb_dev)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ return isp116x_read_reg32(isp116x, HCFMNUM);
+}
+
+static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, char *str)
+{
+#if defined(VERBOSE)
+ int i;
+#endif
+
+ DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx",
+ str,
+ isp116x_get_current_frame_number(dev),
+ usb_pipedevice(pipe),
+ usb_pipeendpoint(pipe),
+ usb_pipeout(pipe) ? 'O' : 'I',
+ usb_pipetype(pipe) < 2 ?
+ (usb_pipeint(pipe) ?
+ "INTR" : "ISOC") :
+ (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status);
+#if defined(VERBOSE)
+ if (len > 0 && buffer) {
+ printf(__FILE__ ": data(%d):", len);
+ for (i = 0; i < 16 && i < len; i++)
+ printf(" %02x", ((__u8 *) buffer)[i]);
+ printf("%s\n", i < len ? "..." : "");
+ }
+#endif
+}
+
+#define PTD_DIR_STR(ptd) ({char __c; \
+ switch(PTD_GET_DIR(ptd)){ \
+ case 0: __c = 's'; break; \
+ case 1: __c = 'o'; break; \
+ default: __c = 'i'; break; \
+ }; __c;})
+
+/*
+ Dump PTD info. The code documents the format
+ perfectly, right :)
+*/
+static inline void dump_ptd(struct ptd *ptd)
+{
+#if defined(VERBOSE)
+ int k;
+#endif
+
+ DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x",
+ PTD_GET_CC(ptd),
+ PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
+ PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+ PTD_GET_TOGGLE(ptd),
+ PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
+#if defined(VERBOSE)
+ printf("isp116x: %s: PTD(byte): ", __FUNCTION__);
+ for (k = 0; k < sizeof(struct ptd); ++k)
+ printf("%02x ", ((u8 *) ptd)[k]);
+ printf("\n");
+#endif
+}
+
+static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type)
+{
+#if defined(VERBOSE)
+ int k;
+
+ if (type == 0 /* 0ut data */ ) {
+ printf("isp116x: %s: out data: ", __FUNCTION__);
+ for (k = 0; k < PTD_GET_LEN(ptd); ++k)
+ printf("%02x ", ((u8 *) buf)[k]);
+ printf("\n");
+ }
+ if (type == 1 /* 1n data */ ) {
+ printf("isp116x: %s: in data: ", __FUNCTION__);
+ for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
+ printf("%02x ", ((u8 *) buf)[k]);
+ printf("\n");
+ }
+
+ if (PTD_GET_LAST(ptd))
+ DBG("--- last PTD ---");
+#endif
+}
+
+#else
+
+#define dump_msg(dev, pipe, buffer, len, str) do { } while (0)
+#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0)
+
+#define dump_ptd(ptd) do {} while (0)
+#define dump_ptd_data(ptd, buf, type) do {} while (0)
+
+#endif
+
+/* --- Virtual Root Hub ---------------------------------------------------- */
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x02,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+ 0x22, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'S', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'P', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '1', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '1', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '6', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'x', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/*
+ * Hub class-specific descriptor is constructed dynamically
+ */
+
+/* --- Virtual root hub management functions ------------------------------- */
+
+static int rh_check_port_status(struct isp116x *isp116x)
+{
+ u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = isp116x_read_reg32(isp116x, HCRHSTATUS);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+/* --- HC management functions --------------------------------------------- */
+
+/* Write len bytes to fifo, pad till 32-bit boundary
+ */
+static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+ u8 *dp = (u8 *) buf;
+ u16 *dp2 = (u16 *) buf;
+ u16 w;
+ int quot = len % 4;
+
+ if ((unsigned long)dp2 & 1) {
+ /* not aligned */
+ for (; len > 1; len -= 2) {
+ w = *dp++;
+ w |= *dp++ << 8;
+ isp116x_raw_write_data16(isp116x, w);
+ }
+ if (len)
+ isp116x_write_data16(isp116x, (u16) * dp);
+ } else {
+ /* aligned */
+ for (; len > 1; len -= 2)
+ isp116x_raw_write_data16(isp116x, *dp2++);
+ if (len)
+ isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2));
+ }
+ if (quot == 1 || quot == 2)
+ isp116x_raw_write_data16(isp116x, 0);
+}
+
+/* Read len bytes from fifo and then read till 32-bit boundary
+ */
+static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+ u8 *dp = (u8 *) buf;
+ u16 *dp2 = (u16 *) buf;
+ u16 w;
+ int quot = len % 4;
+
+ if ((unsigned long)dp2 & 1) {
+ /* not aligned */
+ for (; len > 1; len -= 2) {
+ w = isp116x_raw_read_data16(isp116x);
+ *dp++ = w & 0xff;
+ *dp++ = (w >> 8) & 0xff;
+ }
+ if (len)
+ *dp = 0xff & isp116x_read_data16(isp116x);
+ } else {
+ /* aligned */
+ for (; len > 1; len -= 2)
+ *dp2++ = isp116x_raw_read_data16(isp116x);
+ if (len)
+ *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x);
+ }
+ if (quot == 1 || quot == 2)
+ isp116x_raw_read_data16(isp116x);
+}
+
+/* Write PTD's and data for scheduled transfers into the fifo ram.
+ * Fifo must be empty and ready */
+static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev,
+ unsigned long pipe, struct ptd *ptd, int n, void *data,
+ int len)
+{
+ int buflen = n * sizeof(struct ptd) + len;
+ int i, done;
+
+ DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
+
+ isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+ isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+ isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
+
+ done = 0;
+ for (i = 0; i < n; i++) {
+ DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
+
+ dump_ptd(&ptd[i]);
+ isp116x_write_data16(isp116x, ptd[i].count);
+ isp116x_write_data16(isp116x, ptd[i].mps);
+ isp116x_write_data16(isp116x, ptd[i].len);
+ isp116x_write_data16(isp116x, ptd[i].faddr);
+
+ dump_ptd_data(&ptd[i], (__u8 *) data + done, 0);
+ write_ptddata_to_fifo(isp116x,
+ (__u8 *) data + done,
+ PTD_GET_LEN(&ptd[i]));
+
+ done += PTD_GET_LEN(&ptd[i]);
+ }
+}
+
+/* Read the processed PTD's and data from fifo ram back to URBs' buffers.
+ * Fifo must be full and done */
+static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev,
+ unsigned long pipe, struct ptd *ptd, int n, void *data,
+ int len)
+{
+ int buflen = n * sizeof(struct ptd) + len;
+ int i, done, cc, ret;
+
+ isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+ isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+ isp116x_write_addr(isp116x, HCATLPORT);
+
+ ret = TD_CC_NOERROR;
+ done = 0;
+ for (i = 0; i < n; i++) {
+ DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
+
+ ptd[i].count = isp116x_read_data16(isp116x);
+ ptd[i].mps = isp116x_read_data16(isp116x);
+ ptd[i].len = isp116x_read_data16(isp116x);
+ ptd[i].faddr = isp116x_read_data16(isp116x);
+ dump_ptd(&ptd[i]);
+
+ read_ptddata_from_fifo(isp116x,
+ (__u8 *) data + done,
+ PTD_GET_LEN(&ptd[i]));
+ dump_ptd_data(&ptd[i], (__u8 *) data + done, 1);
+
+ done += PTD_GET_LEN(&ptd[i]);
+
+ cc = PTD_GET_CC(&ptd[i]);
+ if (cc == TD_DATAUNDERRUN) { /* underrun is no error... */
+ DBG("allowed data underrun");
+ cc = TD_CC_NOERROR;
+ }
+ if (cc != TD_CC_NOERROR && ret == TD_CC_NOERROR)
+ ret = cc;
+ }
+
+ DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
+
+ return ret;
+}
+
+/* Interrupt handling
+ */
+static int isp116x_interrupt(struct isp116x *isp116x)
+{
+ u16 irqstat;
+ u32 intstat;
+ int ret = 0;
+
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+ irqstat = isp116x_read_reg16(isp116x, HCuPINT);
+ isp116x_write_reg16(isp116x, HCuPINT, irqstat);
+ DBG(">>>>>> irqstat %x <<<<<<", irqstat);
+
+ if (irqstat & HCuPINT_ATL) {
+ DBG(">>>>>> HCuPINT_ATL <<<<<<");
+ ret = 1;
+ }
+
+ if (irqstat & HCuPINT_OPR) {
+ intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
+ isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
+ DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat);
+
+ if (intstat & HCINT_UE) {
+ ERR("unrecoverable error, controller disabled");
+
+ /* FIXME: be optimistic, hope that bug won't repeat
+ * often. Make some non-interrupt context restart the
+ * controller. Count and limit the retries though;
+ * either hardware or software errors can go forever...
+ */
+ isp116x_reset(isp116x);
+ ret = -1;
+ return -1;
+ }
+
+ if (intstat & HCINT_RHSC) {
+ got_rhsc = 1;
+ ret = 1;
+ /* When root hub or any of its ports is going
+ to come out of suspend, it may take more
+ than 10ms for status bits to stabilize. */
+ wait_ms(20);
+ }
+
+ if (intstat & HCINT_SO) {
+ ERR("schedule overrun");
+ ret = -1;
+ }
+
+ irqstat &= ~HCuPINT_OPR;
+ }
+
+ return ret;
+}
+
+#define PTD_NUM 64 /* it should be enougth... */
+struct ptd ptd[PTD_NUM];
+static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe)
+{
+ return min(PTD_NUM * usb_maxpacket(dev, pipe), PTD_NUM * 16);
+}
+
+/* Do an USB transfer
+ */
+static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
+ int dir, void *buffer, int len)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+ int type = usb_pipetype(pipe);
+ int epnum = usb_pipeendpoint(pipe);
+ int max = usb_maxpacket(dev, pipe);
+ int dir_out = usb_pipeout(pipe);
+ int speed_low = usb_pipeslow(pipe);
+ int i, done, stat, timeout, cc;
+ int retries = 10;
+
+ DBG("------------------------------------------------");
+ dump_msg(dev, pipe, buffer, len, "SUBMIT");
+ DBG("------------------------------------------------");
+
+ if (isp116x->disabled) {
+ ERR("EPIPE");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ ERR("ENODEV");
+ dev->status = USB_ST_CRC_ERR;
+ return USB_ST_CRC_ERR;
+ }
+
+ if (!max) {
+ ERR("pipesize for pipe %lx is zero", pipe);
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ if (type == PIPE_ISOCHRONOUS) {
+ ERR("isochronous transfers not supported");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ /* FIFO not empty? */
+ if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) {
+ ERR("****** FIFO not empty! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+
+ retry:
+ isp116x_write_reg32(isp116x, HCINTSTAT, 0xff);
+
+ /* Prepare the PTD data */
+ done = 0;
+ i = 0;
+ do {
+ ptd[i].count = PTD_CC_MSK | PTD_ACTIVE_MSK |
+ PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out));
+ ptd[i].mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum);
+ ptd[i].len = PTD_LEN(max > len - done ? len - done : max) |
+ PTD_DIR(dir);
+ ptd[i].faddr = PTD_FA(usb_pipedevice(pipe));
+
+ usb_dotoggle(dev, epnum, dir_out);
+ done += PTD_GET_LEN(&ptd[i]);
+ i++;
+ if (i >= PTD_NUM) {
+ ERR("****** Cannot pack buffer! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+ } while (done < len);
+ ptd[i - 1].mps |= PTD_LAST_MSK;
+
+ /* Pack data into FIFO ram */
+ pack_fifo(isp116x, dev, pipe, ptd, i, buffer, len);
+#ifdef EXTRA_DELAY
+ wait_ms(EXTRA_DELAY);
+#endif
+
+ /* Start the data transfer */
+
+ /* Allow more time for a BULK device to react - some are slow */
+ if (usb_pipetype(pipe) == PIPE_BULK)
+ timeout = 5000;
+ else
+ timeout = 100;
+
+ /* Wait for it to complete */
+ for (;;) {
+ /* Check whether the controller is done */
+ stat = isp116x_interrupt(isp116x);
+
+ if (stat < 0) {
+ dev->status = USB_ST_CRC_ERR;
+ break;
+ }
+ if (stat > 0)
+ break;
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ ERR("CTL:TIMEOUT ");
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+ }
+
+ /* We got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+ isp116x_show_regs(isp116x);
+
+ got_rhsc = 0;
+
+ /* Abuse timeout */
+ timeout = rh_check_port_status(isp116x);
+ if (timeout >= 0) {
+ /*
+ * FIXME! NOTE! AAAARGH!
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+
+ /* Ok, now we can read transfer status */
+
+ /* FIFO not ready? */
+ if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) {
+ ERR("****** FIFO not ready! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+
+ /* Unpack data from FIFO ram */
+ cc = unpack_fifo(isp116x, dev, pipe, ptd, i, buffer, len);
+
+ /* Mmm... sometime we get 0x0f as cc which is a non sense!
+ * Just retry the transfer...
+ */
+ if (cc == 0x0f && retries-- > 0) {
+ usb_dotoggle(dev, epnum, dir_out);
+ goto retry;
+ }
+
+ if (cc != TD_CC_NOERROR) {
+ DBG("****** completition code error %x ******", cc);
+ switch (cc) {
+ case TD_CC_BITSTUFFING:
+ dev->status = USB_ST_BIT_ERR;
+ break;
+ case TD_CC_STALL:
+ dev->status = USB_ST_STALLED;
+ break;
+ case TD_BUFFEROVERRUN:
+ case TD_BUFFERUNDERRUN:
+ dev->status = USB_ST_BUF_ERR;
+ break;
+ default:
+ dev->status = USB_ST_CRC_ERR;
+ }
+ return -cc;
+ }
+
+ dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)");
+
+ dev->status = 0;
+ return done;
+}
+
+/* Adapted from au1x00_usb_ohci.c
+ */
+static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *cmd)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+ u32 tmp = 0;
+
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ u32 datab[4];
+ u8 *data_buf = (u8 *) datab;
+ u16 bmRType_bReq;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ INFO("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+
+ DBG("--- HUB ----------------------------------------");
+ DBG("submit rh urb, req=%x val=%#x index=%#x len=%d",
+ bmRType_bReq, wValue, wIndex, wLength);
+ dump_msg(dev, pipe, buffer, transfer_len, "RH");
+ DBG("------------------------------------------------");
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ DBG("RH_GET_STATUS");
+
+ *(__u16 *) data_buf = swap_16(1);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_INTERFACE:
+ DBG("RH_GET_STATUS | RH_INTERFACE");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_ENDPOINT:
+ DBG("RH_GET_STATUS | RH_ENDPOINT");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_CLASS:
+ DBG("RH_GET_STATUS | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+ *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE));
+ len = 4;
+ break;
+
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1);
+ *(__u32 *) data_buf = swap_32(tmp);
+ isp116x_show_regs(isp116x);
+ len = 4;
+ break;
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ DBG("RH_CLEAR_FEATURE | RH_ENDPOINT");
+
+ switch (wValue) {
+ case RH_ENDPOINT_STALL:
+ DBG("C_HUB_ENDPOINT_STALL");
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ DBG("RH_CLEAR_FEATURE | RH_CLASS");
+
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ DBG("C_HUB_LOCAL_POWER");
+ len = 0;
+ break;
+
+ case RH_C_HUB_OVER_CURRENT:
+ DBG("C_HUB_OVER_CURRENT");
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS");
+
+ switch (wValue) {
+ case RH_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_CCS);
+ len = 0;
+ break;
+
+ case RH_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_POCI);
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_LSDA);
+ len = 0;
+ break;
+
+ case RH_C_PORT_CONNECTION:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_CSC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PESC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PSSC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_OVER_CURRENT:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_POCI);
+ len = 0;
+ break;
+
+ case RH_C_PORT_RESET:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PRSC);
+ len = 0;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ isp116x_show_regs(isp116x);
+
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS");
+
+ switch (wValue) {
+ case RH_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PSS);
+ len = 0;
+ break;
+
+ case RH_PORT_RESET:
+ /* Spin until any current reset finishes */
+ while (1) {
+ tmp =
+ isp116x_read_reg32(isp116x,
+ HCRHPORT1 + wIndex - 1);
+ if (!(tmp & RH_PS_PRS))
+ break;
+ wait_ms(1);
+ }
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PRS);
+ wait_ms(10);
+
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PPS);
+ len = 0;
+ break;
+
+ case RH_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PES);
+ len = 0;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ isp116x_show_regs(isp116x);
+
+ break;
+
+ case RH_SET_ADDRESS:
+ DBG("RH_SET_ADDRESS");
+
+ rh_devnum = wValue;
+ len = 0;
+ break;
+
+ case RH_GET_DESCRIPTOR:
+ DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength);
+
+ switch (wValue) {
+ case (USB_DT_DEVICE << 8): /* device descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des;
+ break;
+
+ case (USB_DT_CONFIG << 8): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ DBG("RH_GET_DESCRIPTOR | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+ data_buf[0] = 0x09; /* min length; */
+ data_buf[1] = 0x29;
+ data_buf[2] = tmp & RH_A_NDP;
+ data_buf[3] = 0;
+ if (tmp & RH_A_PSM) /* per-port power switching? */
+ data_buf[3] |= 0x01;
+ if (tmp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf[3] |= 0x10;
+ else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */
+ data_buf[3] |= 0x08;
+
+ /* Corresponds to data_buf[4-7] */
+ datab[1] = 0;
+ data_buf[5] = (tmp & RH_A_POTPGT) >> 24;
+
+ tmp = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+ data_buf[7] = tmp & RH_B_DR;
+ if (data_buf[2] < 7)
+ data_buf[8] = 0xff;
+ else {
+ data_buf[0] += 2;
+ data_buf[8] = (tmp & RH_B_DR) >> 8;
+ data_buf[10] = data_buf[9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf[0], wLength));
+ break;
+
+ case RH_GET_CONFIGURATION:
+ DBG("RH_GET_CONFIGURATION");
+
+ *(__u8 *) data_buf = 0x01;
+ len = 1;
+ break;
+
+ case RH_SET_CONFIGURATION:
+ DBG("RH_SET_CONFIGURATION");
+
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC);
+ len = 0;
+ break;
+
+ default:
+ ERR("*** *** *** unsupported root hub command *** *** ***");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min_t(int, len, leni);
+ if (buffer != data_buf)
+ memcpy(buffer, data_buf, len);
+
+ dev->act_len = len;
+ dev->status = stat;
+ DBG("dev act_len %d, status %d", dev->act_len, dev->status);
+
+ dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)");
+
+ return stat;
+}
+
+/* --- Transfer functions -------------------------------------------------- */
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval)
+{
+ DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d",
+ dev, pipe, buffer, len, interval);
+
+ return -1;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, struct devrequest *setup)
+{
+ int devnum = usb_pipedevice(pipe);
+ int epnum = usb_pipeendpoint(pipe);
+ int max = max_transfer_len(dev, pipe);
+ int dir_in = usb_pipein(pipe);
+ int done, ret;
+
+ /* Control message is for the HUB? */
+ if (devnum == rh_devnum)
+ return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup);
+
+ /* Ok, no HUB message so send the message to the device */
+
+ /* Setup phase */
+ DBG("--- SETUP PHASE --------------------------------");
+ usb_settoggle(dev, epnum, 1, 0);
+ ret = isp116x_submit_job(dev, pipe,
+ PTD_DIR_SETUP,
+ setup, sizeof(struct devrequest));
+ if (ret < 0) {
+ DBG("control setup phase error (ret = %d", ret);
+ return -1;
+ }
+
+ /* Data phase */
+ DBG("--- DATA PHASE ---------------------------------");
+ done = 0;
+ usb_settoggle(dev, epnum, !dir_in, 1);
+ while (done < len) {
+ ret = isp116x_submit_job(dev, pipe,
+ dir_in ? PTD_DIR_IN : PTD_DIR_OUT,
+ (__u8 *) buffer + done,
+ max > len - done ? len - done : max);
+ if (ret < 0) {
+ DBG("control data phase error (ret = %d)", ret);
+ return -1;
+ }
+ done += ret;
+
+ if (dir_in && ret < max) /* short packet */
+ break;
+ }
+
+ /* Status phase */
+ DBG("--- STATUS PHASE -------------------------------");
+ usb_settoggle(dev, epnum, !dir_in, 1);
+ ret = isp116x_submit_job(dev, pipe,
+ !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0);
+ if (ret < 0) {
+ DBG("control status phase error (ret = %d", ret);
+ return -1;
+ }
+
+ dev->act_len = done;
+
+ dump_msg(dev, pipe, buffer, len, "DEV(ret)");
+
+ return done;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len)
+{
+ int dir_out = usb_pipeout(pipe);
+ int max = max_transfer_len(dev, pipe);
+ int done, ret;
+
+ DBG("--- BULK ---------------------------------------");
+ DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d",
+ usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
+
+ done = 0;
+ while (done < len) {
+ ret = isp116x_submit_job(dev, pipe,
+ !dir_out ? PTD_DIR_IN : PTD_DIR_OUT,
+ (__u8 *) buffer + done,
+ max > len - done ? len - done : max);
+ if (ret < 0) {
+ DBG("error on bulk message (ret = %d)", ret);
+ return -1;
+ }
+
+ done += ret;
+
+ if (!dir_out && ret < max) /* short packet */
+ break;
+ }
+
+ dev->act_len = done;
+
+ return 0;
+}
+
+/* --- Basic functions ----------------------------------------------------- */
+
+static int isp116x_sw_reset(struct isp116x *isp116x)
+{
+ int retries = 15;
+ int ret = 0;
+
+ DBG("");
+
+ isp116x->disabled = 1;
+
+ isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC);
+ isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
+ while (--retries) {
+ /* It usually resets within 1 ms */
+ wait_ms(1);
+ if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
+ break;
+ }
+ if (!retries) {
+ ERR("software reset timeout");
+ ret = -1;
+ }
+ return ret;
+}
+
+static int isp116x_reset(struct isp116x *isp116x)
+{
+ unsigned long t;
+ u16 clkrdy = 0;
+ int ret, timeout = 15 /* ms */ ;
+
+ DBG("");
+
+ ret = isp116x_sw_reset(isp116x);
+ if (ret)
+ return ret;
+
+ for (t = 0; t < timeout; t++) {
+ clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
+ if (clkrdy)
+ break;
+ wait_ms(1);
+ }
+ if (!clkrdy) {
+ ERR("clock not ready after %dms", timeout);
+ /* After sw_reset the clock won't report to be ready, if
+ H_WAKEUP pin is high. */
+ ERR("please make sure that the H_WAKEUP pin is pulled low!");
+ ret = -1;
+ }
+ return ret;
+}
+
+static void isp116x_stop(struct isp116x *isp116x)
+{
+ u32 val;
+
+ DBG("");
+
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+ /* Switch off ports' power, some devices don't come up
+ after next 'start' without this */
+ val = isp116x_read_reg32(isp116x, HCRHDESCA);
+ val &= ~(RH_A_NPS | RH_A_PSM);
+ isp116x_write_reg32(isp116x, HCRHDESCA, val);
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
+
+ isp116x_sw_reset(isp116x);
+}
+
+/*
+ * Configure the chip. The chip must be successfully reset by now.
+ */
+static int isp116x_start(struct isp116x *isp116x)
+{
+ struct isp116x_platform_data *board = isp116x->board;
+ u32 val;
+
+ DBG("");
+
+ /* Clear interrupt status and disable all interrupt sources */
+ isp116x_write_reg16(isp116x, HCuPINT, 0xff);
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+ isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
+ isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
+
+ /* Hardware configuration */
+ val = HCHWCFG_DBWIDTH(1);
+ if (board->sel15Kres)
+ val |= HCHWCFG_15KRSEL;
+ /* Remote wakeup won't work without working clock */
+ if (board->remote_wakeup_enable)
+ val |= HCHWCFG_CLKNOTSTOP;
+ if (board->oc_enable)
+ val |= HCHWCFG_ANALOG_OC;
+ isp116x_write_reg16(isp116x, HCHWCFG, val);
+
+ /* --- Root hub configuration */
+ val = (25 << 24) & RH_A_POTPGT;
+ /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+ be always set. Yet, instead, we request individual port
+ power switching. */
+ val |= RH_A_PSM;
+ /* Report overcurrent per port */
+ val |= RH_A_OCPM;
+ isp116x_write_reg32(isp116x, HCRHDESCA, val);
+ isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+ val = RH_B_PPCM;
+ isp116x_write_reg32(isp116x, HCRHDESCB, val);
+ isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+ val = 0;
+ if (board->remote_wakeup_enable)
+ val |= RH_HS_DRWE;
+ isp116x_write_reg32(isp116x, HCRHSTATUS, val);
+ isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+ isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf);
+
+ /* Go operational */
+ val = HCCONTROL_USB_OPER;
+ if (board->remote_wakeup_enable)
+ val |= HCCONTROL_RWE;
+ isp116x_write_reg32(isp116x, HCCONTROL, val);
+
+ /* Disable ports to avoid race in device enumeration */
+ isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
+ isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
+
+ isp116x_show_regs(isp116x);
+
+ isp116x->disabled = 0;
+
+ return 0;
+}
+
+/* --- Init functions ------------------------------------------------------ */
+
+int isp116x_check_id(struct isp116x *isp116x)
+{
+ int val;
+
+ val = isp116x_read_reg16(isp116x, HCCHIPID);
+ if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+ ERR("invalid chip ID %04x", val);
+ return -1;
+ }
+
+ return 0;
+}
+
+int usb_lowlevel_init(void)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ DBG("");
+
+ /* Init device registers addr */
+ isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR;
+ isp116x->data_reg = (u16 *) ISP116X_HCD_DATA;
+
+ /* Setup specific board settings */
+#ifdef ISP116X_HCD_SEL15kRES
+ isp116x_board.sel15Kres = 1;
+#endif
+#ifdef ISP116X_HCD_OC_ENABLE
+ isp116x_board.oc_enable = 1;
+#endif
+#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE
+ isp116x_board.remote_wakeup_enable = 1;
+#endif
+ isp116x->board = &isp116x_board;
+
+ /* Try to get ISP116x silicon chip ID */
+ if (isp116x_check_id(isp116x) < 0)
+ return -1;
+
+ isp116x->disabled = 1;
+ isp116x->sleeping = 0;
+
+ isp116x_reset(isp116x);
+ isp116x_start(isp116x);
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ DBG("");
+
+ if (!isp116x->disabled)
+ isp116x_stop(isp116x);
+
+ return 0;
+}
+
+#endif /* CONFIG_USB_ISP116X_HCD */
diff --git a/drivers/isp116x.h b/drivers/isp116x.h
new file mode 100644
index 0000000..a3ce3b5
--- /dev/null
+++ b/drivers/isp116x.h
@@ -0,0 +1,489 @@
+/*
+ * ISP116x register declarations and HCD data structures
+ *
+ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ * Portions:
+ * Copyright (C) 2004 Lothar Wassmann
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef DEBUG
+#define DBG(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#else
+#define DBG(fmt, args...) do {} while (0)
+#endif
+
+#ifdef VERBOSE
+# define VDBG DBG
+#else
+# define VDBG(fmt, args...) do {} while (0)
+#endif
+
+#define ERR(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#define WARN(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#define INFO(fmt, args...) \
+ printf("isp116x: " fmt "\n" , ## args)
+
+/* ------------------------------------------------------------------------- */
+
+/* us of 1ms frame */
+#define MAX_LOAD_LIMIT 850
+
+/* Full speed: max # of bytes to transfer for a single urb
+ at a time must be < 1024 && must be multiple of 64.
+ 832 allows transfering 4kiB within 5 frames. */
+#define MAX_TRANSFER_SIZE_FULLSPEED 832
+
+/* Low speed: there is no reason to schedule in very big
+ chunks; often the requested long transfers are for
+ string descriptors containing short strings. */
+#define MAX_TRANSFER_SIZE_LOWSPEED 64
+
+/* Bytetime (us), a rough indication of how much time it
+ would take to transfer a byte of useful data over USB */
+#define BYTE_TIME_FULLSPEED 1
+#define BYTE_TIME_LOWSPEED 20
+
+/* Buffer sizes */
+#define ISP116x_BUF_SIZE 4096
+#define ISP116x_ITL_BUFSIZE 0
+#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
+
+#define ISP116x_WRITE_OFFSET 0x80
+
+/* --- ISP116x registers/bits ---------------------------------------------- */
+
+#define HCREVISION 0x00
+#define HCCONTROL 0x01
+#define HCCONTROL_HCFS (3 << 6) /* host controller
+ functional state */
+#define HCCONTROL_USB_RESET (0 << 6)
+#define HCCONTROL_USB_RESUME (1 << 6)
+#define HCCONTROL_USB_OPER (2 << 6)
+#define HCCONTROL_USB_SUSPEND (3 << 6)
+#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */
+#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */
+#define HCCMDSTAT 0x02
+#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */
+#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */
+#define HCINTSTAT 0x03
+#define HCINT_SO (1 << 0) /* scheduling overrun */
+#define HCINT_WDH (1 << 1) /* writeback of done_head */
+#define HCINT_SF (1 << 2) /* start frame */
+#define HCINT_RD (1 << 3) /* resume detect */
+#define HCINT_UE (1 << 4) /* unrecoverable error */
+#define HCINT_FNO (1 << 5) /* frame number overflow */
+#define HCINT_RHSC (1 << 6) /* root hub status change */
+#define HCINT_OC (1 << 30) /* ownership change */
+#define HCINT_MIE (1 << 31) /* master interrupt enable */
+#define HCINTENB 0x04
+#define HCINTDIS 0x05
+#define HCFMINTVL 0x0d
+#define HCFMREM 0x0e
+#define HCFMNUM 0x0f
+#define HCLSTHRESH 0x11
+#define HCRHDESCA 0x12
+#define RH_A_NDP (0x3 << 0) /* # downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* overcurrent protection
+ mode */
+#define RH_A_NOCP (1 << 12) /* no overcurrent protection */
+#define RH_A_POTPGT (0xff << 24) /* power on -> power good
+ time */
+#define HCRHDESCB 0x13
+#define RH_B_DR (0xffff << 0) /* device removable flags */
+#define RH_B_PPCM (0xffff << 16) /* port power control mask */
+#define HCRHSTATUS 0x14
+#define RH_HS_LPS (1 << 0) /* local power status */
+#define RH_HS_OCI (1 << 1) /* over current indicator */
+#define RH_HS_DRWE (1 << 15) /* device remote wakeup
+ enable */
+#define RH_HS_LPSC (1 << 16) /* local power status change */
+#define RH_HS_OCIC (1 << 17) /* over current indicator
+ change */
+#define RH_HS_CRWE (1 << 31) /* clear remote wakeup
+ enable */
+#define HCRHPORT1 0x15
+#define RH_PS_CCS (1 << 0) /* current connect status */
+#define RH_PS_PES (1 << 1) /* port enable status */
+#define RH_PS_PSS (1 << 2) /* port suspend status */
+#define RH_PS_POCI (1 << 3) /* port over current
+ indicator */
+#define RH_PS_PRS (1 << 4) /* port reset status */
+#define RH_PS_PPS (1 << 8) /* port power status */
+#define RH_PS_LSDA (1 << 9) /* low speed device attached */
+#define RH_PS_CSC (1 << 16) /* connect status change */
+#define RH_PS_PESC (1 << 17) /* port enable status change */
+#define RH_PS_PSSC (1 << 18) /* port suspend status
+ change */
+#define RH_PS_OCIC (1 << 19) /* over current indicator
+ change */
+#define RH_PS_PRSC (1 << 20) /* port reset status change */
+#define HCRHPORT_CLRMASK (0x1f << 16)
+#define HCRHPORT2 0x16
+#define HCHWCFG 0x20
+#define HCHWCFG_15KRSEL (1 << 12)
+#define HCHWCFG_CLKNOTSTOP (1 << 11)
+#define HCHWCFG_ANALOG_OC (1 << 10)
+#define HCHWCFG_DACK_MODE (1 << 8)
+#define HCHWCFG_EOT_POL (1 << 7)
+#define HCHWCFG_DACK_POL (1 << 6)
+#define HCHWCFG_DREQ_POL (1 << 5)
+#define HCHWCFG_DBWIDTH_MASK (0x03 << 3)
+#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define HCHWCFG_INT_POL (1 << 2)
+#define HCHWCFG_INT_TRIGGER (1 << 1)
+#define HCHWCFG_INT_ENABLE (1 << 0)
+#define HCDMACFG 0x21
+#define HCDMACFG_BURST_LEN_MASK (0x03 << 5)
+#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0)
+#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1)
+#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2)
+#define HCDMACFG_DMA_ENABLE (1 << 4)
+#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1)
+#define HCDMACFG_CTR_SEL (1 << 2)
+#define HCDMACFG_ITLATL_SEL (1 << 1)
+#define HCDMACFG_DMA_RW_SELECT (1 << 0)
+#define HCXFERCTR 0x22
+#define HCuPINT 0x24
+#define HCuPINT_SOF (1 << 0)
+#define HCuPINT_ATL (1 << 1)
+#define HCuPINT_AIIEOT (1 << 2)
+#define HCuPINT_OPR (1 << 4)
+#define HCuPINT_SUSP (1 << 5)
+#define HCuPINT_CLKRDY (1 << 6)
+#define HCuPINTENB 0x25
+#define HCCHIPID 0x27
+#define HCCHIPID_MASK 0xff00
+#define HCCHIPID_MAGIC 0x6100
+#define HCSCRATCH 0x28
+#define HCSWRES 0x29
+#define HCSWRES_MAGIC 0x00f6
+#define HCITLBUFLEN 0x2a
+#define HCATLBUFLEN 0x2b
+#define HCBUFSTAT 0x2c
+#define HCBUFSTAT_ITL0_FULL (1 << 0)
+#define HCBUFSTAT_ITL1_FULL (1 << 1)
+#define HCBUFSTAT_ATL_FULL (1 << 2)
+#define HCBUFSTAT_ITL0_DONE (1 << 3)
+#define HCBUFSTAT_ITL1_DONE (1 << 4)
+#define HCBUFSTAT_ATL_DONE (1 << 5)
+#define HCRDITL0LEN 0x2d
+#define HCRDITL1LEN 0x2e
+#define HCITLPORT 0x40
+#define HCATLPORT 0x41
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13)
+#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK)
+#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7)
+#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK)
+
+/* Hardware transfer status codes -- CC from ptd->count */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+ /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+ /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED 0x0F
+
+/* ------------------------------------------------------------------------- */
+
+#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
+#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
+
+/* Philips transfer descriptor */
+struct ptd {
+ u16 count;
+#define PTD_COUNT_MSK (0x3ff << 0)
+#define PTD_TOGGLE_MSK (1 << 10)
+#define PTD_ACTIVE_MSK (1 << 11)
+#define PTD_CC_MSK (0xf << 12)
+ u16 mps;
+#define PTD_MPS_MSK (0x3ff << 0)
+#define PTD_SPD_MSK (1 << 10)
+#define PTD_LAST_MSK (1 << 11)
+#define PTD_EP_MSK (0xf << 12)
+ u16 len;
+#define PTD_LEN_MSK (0x3ff << 0)
+#define PTD_DIR_MSK (3 << 10)
+#define PTD_DIR_SETUP (0)
+#define PTD_DIR_OUT (1)
+#define PTD_DIR_IN (2)
+#define PTD_B5_5_MSK (1 << 13)
+ u16 faddr;
+#define PTD_FA_MSK (0x7f << 0)
+#define PTD_FMT_MSK (1 << 7)
+} __attribute__ ((packed, aligned(2)));
+
+struct isp116x_ep {
+ struct usb_device *udev;
+ struct ptd ptd;
+
+ u8 maxpacket;
+ u8 epnum;
+ u8 nextpid;
+
+ u16 length; /* of current packet */
+ unsigned char *data; /* to databuf */
+
+ u16 error_count;
+};
+
+/* URB struct */
+#define N_URB_TD 48
+#define URB_DEL 1
+typedef struct {
+ struct isp116x_ep *ed;
+ void *transfer_buffer; /* (in) associated data buffer */
+ int actual_length; /* (return) actual transfer length */
+ unsigned long pipe; /* (in) pipe information */
+#if 0
+ int state;
+#endif
+} urb_priv_t;
+
+struct isp116x_platform_data {
+ /* Enable internal resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* On-chip overcurrent detection */
+ unsigned oc_enable:1;
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
+ unsigned remote_wakeup_enable:1;
+};
+
+struct isp116x {
+ u16 *addr_reg;
+ u16 *data_reg;
+
+ struct isp116x_platform_data *board;
+
+ struct dentry *dentry;
+ unsigned long stat1, stat2, stat4, stat8, stat16;
+
+ /* Status flags */
+ unsigned disabled:1;
+ unsigned sleeping:1;
+
+ /* Root hub registers */
+ u32 rhdesca;
+ u32 rhdescb;
+ u32 rhstatus;
+ u32 rhport[2];
+
+ /* Schedule for the current frame */
+ struct isp116x_ep *atl_active;
+ int atl_buflen;
+ int atl_bufshrt;
+ int atl_last_dir;
+ int atl_finishing;
+};
+
+/* ------------------------------------------------- */
+
+/* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 150ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG
+ * OE, WE MUST NOT be changed during these intervals
+ */
+#if defined(UDELAY)
+#define isp116x_delay(h,d) udelay(d)
+#else
+#define isp116x_delay(h,d) do {} while (0)
+#endif
+
+static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
+{
+ writew(reg & 0xff, isp116x->addr_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
+{
+ writew(val, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
+{
+ __raw_writew(val, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline u16 isp116x_read_data16(struct isp116x *isp116x)
+{
+ u16 val;
+
+ val = readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
+{
+ u16 val;
+
+ val = __raw_readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
+{
+ writew(val & 0xffff, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ writew(val >> 16, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline u32 isp116x_read_data32(struct isp116x *isp116x)
+{
+ u32 val;
+
+ val = (u32) readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ val |= ((u32) readw(isp116x->data_reg)) << 16;
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+/* Let's keep register access functions out of line. Hint:
+ we wait at least 150 ns at every access.
+*/
+static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
+{
+ isp116x_write_addr(isp116x, reg);
+ return isp116x_read_data16(isp116x);
+}
+
+static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
+{
+ isp116x_write_addr(isp116x, reg);
+ return isp116x_read_data32(isp116x);
+}
+
+static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
+ unsigned val)
+{
+ isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+ isp116x_write_data16(isp116x, (u16) (val & 0xffff));
+}
+
+static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
+ unsigned val)
+{
+ isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+ isp116x_write_data32(isp116x, (u32) val);
+}
+
+/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
diff --git a/include/usb.h b/include/usb.h
index 419a7e3..504ccc4 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -169,7 +169,10 @@ struct usb_device {
* this is how the lowlevel part communicate with the outer world
*/
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS) || defined(CONFIG_USB_OHCI_NEW)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
+ defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
+ defined(CONFIG_USB_ISP116X_HCD)
+
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);