summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-mvebu/include/mach/soc.h1
-rw-r--r--drivers/pci/pci_mvebu.c25
2 files changed, 14 insertions, 12 deletions
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index 0f69f33..0900e40 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -67,6 +67,7 @@
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
+#define MVEBU_REG_PCIE0_BASE (MVEBU_REGISTER(0x80000))
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
index 0f44970..da0aa29 100644
--- a/drivers/pci/pci_mvebu.c
+++ b/drivers/pci/pci_mvebu.c
@@ -91,25 +91,26 @@ static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
#if defined(CONFIG_ARMADA_38X)
#define PCIE_BASE(if) \
((if) == 0 ? \
- MVEBU_REG_PCIE_BASE + 0x40000 : \
- MVEBU_REG_PCIE_BASE + 0x4000 * (if))
+ MVEBU_REG_PCIE0_BASE : \
+ (MVEBU_REG_PCIE_BASE + 0x4000 * (if - 1)))
/*
* On A38x MV6820 these PEX ports are supported:
* 0 - Port 0.0
- * 1 - Port 0.1
- * 2 - Port 0.2
+ * 1 - Port 1.0
+ * 2 - Port 2.0
+ * 3 - Port 3.0
*/
-#define MAX_PEX 3
+#define MAX_PEX 4
static struct mvebu_pcie pcie_bus[MAX_PEX];
static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
int *mem_target, int *mem_attr)
{
- u8 port[] = { 0, 1, 2 };
- u8 lane[] = { 0, 0, 0 };
- u8 target[] = { 8, 4, 4 };
- u8 attr[] = { 0xe8, 0xe8, 0xd8 };
+ u8 port[] = { 0, 1, 2, 3 };
+ u8 lane[] = { 0, 0, 0, 0 };
+ u8 target[] = { 8, 4, 4, 4 };
+ u8 attr[] = { 0xe8, 0xe8, 0xd8, 0xb8 };
pcie->port = port[pex_idx];
pcie->lane = lane[pex_idx];
@@ -351,9 +352,9 @@ void pci_init_board(void)
mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr);
/* Don't read at all from pci registers if port power is down */
- if (pcie->lane == 0 && SELECT(soc_ctrl, pcie->port) == 0) {
- i += 3;
- debug("%s: skipping port %d\n", __func__, pcie->port);
+ if (SELECT(soc_ctrl, pcie->port) == 0) {
+ if (pcie->lane == 0)
+ debug("%s: skipping port %d\n", __func__, pcie->port);
continue;
}