summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/omap4/emif.c39
-rw-r--r--arch/arm/include/asm/arch-omap4/emif.h10
2 files changed, 30 insertions, 19 deletions
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
index 1234a7e..487ec42 100644
--- a/arch/arm/cpu/armv7/omap4/emif.c
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -151,22 +151,13 @@ static void emif_update_timings(u32 base, const struct emif_regs *regs)
writel(regs->zq_config, &emif->emif_zq_config);
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
- /*
- * Workaround:
- * In a specific situation, the OCP interface between the DMM and
- * EMIF may hang.
- * 1. A TILER port is used to perform 2D burst writes of
- * width 1 and height 8
- * 2. ELLAn port is used to perform reads
- * 3. All accesses are routed to the same EMIF controller
- *
- * Work around to avoid this issue REG_SYS_THRESH_MAX value should
- * be kept higher than default 0x7. As per recommondation 0x0A will
- * be used for better performance with REG_LL_THRESH_MAX = 0x00
- */
- if (omap_revision() == OMAP4430_ES1_0) {
- writel(EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00,
- &emif->emif_l3_config);
+
+ if (omap_revision() >= OMAP4460_ES1_0) {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
+ &emif->emif_l3_config);
+ } else {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
+ &emif->emif_l3_config);
}
}
@@ -504,7 +495,7 @@ static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
{
u32 idle = 0, val = 0;
if (volt_ramp)
- val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 + 1;
+ val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
else
/*Maximum value in normal conditions - suggested by hw team */
val = 0x1FF;
@@ -1237,6 +1228,20 @@ static void dmm_init(u32 base)
&hw_lisa_map_regs->dmm_lisa_map_1);
writel(lisa_map_regs->dmm_lisa_map_0,
&hw_lisa_map_regs->dmm_lisa_map_0);
+
+ if (omap_revision() >= OMAP4460_ES1_0) {
+ hw_lisa_map_regs =
+ (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
+
+ writel(lisa_map_regs->dmm_lisa_map_3,
+ &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(lisa_map_regs->dmm_lisa_map_2,
+ &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(lisa_map_regs->dmm_lisa_map_1,
+ &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(lisa_map_regs->dmm_lisa_map_0,
+ &hw_lisa_map_regs->dmm_lisa_map_0);
+ }
}
/*
diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h
index a167508..37ad1fd 100644
--- a/arch/arm/include/asm/arch-omap4/emif.h
+++ b/arch/arm/include/asm/arch-omap4/emif.h
@@ -248,6 +248,8 @@
/* OCP_CONFIG */
#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24
#define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24)
+#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT 20
+#define OMAP44XX_REG_MPU_THRESH_MAX_MASK (0xf << 20)
#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16
#define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16)
#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0
@@ -472,6 +474,9 @@
/* DMM */
#define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040
+/* Memory Adapter (4460 onwards) */
+#define OMAP44XX_MA_LISA_MAP_BASE 0x482AF040
+
/* DMM_LISA_MAP */
#define OMAP44XX_SYS_ADDR_SHIFT 24
#define OMAP44XX_SYS_ADDR_MASK (0xff << 24)
@@ -774,8 +779,9 @@ struct control_lpddr2io_regs {
((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
& OMAP44XX_REG_PD_TIM_SHDW_MASK))
-/* EMIF_L3_CONFIG register value for ES1*/
-#define EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00 0x0A0000FF
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
/*
* Value of bits 12:31 of DDR_PHY_CTRL_1 register:
* All these fields have magic values dependent on frequency and