summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/gateworks/gw_ventana/eeprom.c168
-rw-r--r--board/gateworks/gw_ventana/gw_ventana.c100
-rw-r--r--board/gateworks/gw_ventana/ventana_eeprom.h11
-rw-r--r--include/configs/gw_ventana.h5
4 files changed, 198 insertions, 86 deletions
diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index e90186e..3edc915 100644
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -6,7 +6,10 @@
*/
#include <common.h>
+#include <errno.h>
#include <i2c.h>
+#include <malloc.h>
+#include <asm/bitops.h>
#include "gsc.h"
#include "ventana_eeprom.h"
@@ -38,14 +41,12 @@ read_eeprom(int bus, struct ventana_board_info *info)
/* read eeprom config section */
if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
puts("EEPROM: Failed to read EEPROM\n");
- info->model[0] = 0;
return GW_UNKNOWN;
}
/* sanity checks */
if (info->model[0] != 'G' || info->model[1] != 'W') {
puts("EEPROM: Invalid Model in EEPROM\n");
- info->model[0] = 0;
return GW_UNKNOWN;
}
@@ -55,7 +56,6 @@ read_eeprom(int bus, struct ventana_board_info *info)
if ((info->chksum[0] != chksum>>8) ||
(info->chksum[1] != (chksum&0xff))) {
puts("EEPROM: Failed EEPROM checksum\n");
- info->model[0] = 0;
return GW_UNKNOWN;
}
@@ -87,3 +87,165 @@ read_eeprom(int bus, struct ventana_board_info *info)
}
return type;
}
+
+/* list of config bits that the bootloader will remove from dtb if not set */
+struct ventana_eeprom_config econfig[] = {
+ { "eth0", "ethernet0", EECONFIG_ETH0 },
+ { "eth1", "ethernet1", EECONFIG_ETH1 },
+ { "sata", "ahci0", EECONFIG_SATA },
+ { "pcie", NULL, EECONFIG_PCIE},
+ { "lvds0", NULL, EECONFIG_LVDS0 },
+ { "lvds1", NULL, EECONFIG_LVDS1 },
+ { "usb0", NULL, EECONFIG_USB0 },
+ { "usb1", NULL, EECONFIG_USB1 },
+ { "mmc0", NULL, EECONFIG_SD0 },
+ { "mmc1", NULL, EECONFIG_SD1 },
+ { "mmc2", NULL, EECONFIG_SD2 },
+ { "mmc3", NULL, EECONFIG_SD3 },
+ { "uart0", NULL, EECONFIG_UART0 },
+ { "uart1", NULL, EECONFIG_UART1 },
+ { "uart2", NULL, EECONFIG_UART2 },
+ { "uart3", NULL, EECONFIG_UART3 },
+ { "uart4", NULL, EECONFIG_UART4 },
+ { "ipu0", NULL, EECONFIG_IPU0 },
+ { "ipu1", NULL, EECONFIG_IPU1 },
+ { "can0", NULL, EECONFIG_FLEXCAN },
+ { "i2c0", NULL, EECONFIG_I2C0 },
+ { "i2c1", NULL, EECONFIG_I2C1 },
+ { "i2c2", NULL, EECONFIG_I2C2 },
+ { "vpu", NULL, EECONFIG_VPU },
+ { "csi0", NULL, EECONFIG_CSI0 },
+ { "csi1", NULL, EECONFIG_CSI1 },
+ { "spi0", NULL, EECONFIG_ESPCI0 },
+ { "spi1", NULL, EECONFIG_ESPCI1 },
+ { "spi2", NULL, EECONFIG_ESPCI2 },
+ { "spi3", NULL, EECONFIG_ESPCI3 },
+ { "spi4", NULL, EECONFIG_ESPCI4 },
+ { "spi5", NULL, EECONFIG_ESPCI5 },
+ { "gps", "pps", EECONFIG_GPS },
+ { "hdmi_in", NULL, EECONFIG_HDMI_IN },
+ { "hdmi_out", NULL, EECONFIG_HDMI_OUT },
+ { "cvbs_in", NULL, EECONFIG_VID_IN },
+ { "cvbs_out", NULL, EECONFIG_VID_OUT },
+ { "nand", NULL, EECONFIG_NAND },
+ { /* Sentinel */ }
+};
+
+#ifdef CONFIG_CMD_EECONFIG
+static struct ventana_eeprom_config *get_config(const char *name)
+{
+ struct ventana_eeprom_config *cfg = econfig;
+
+ while (cfg->name) {
+ if (0 == strcmp(name, cfg->name))
+ return cfg;
+ cfg++;
+ }
+ return NULL;
+}
+
+static u8 econfig_bytes[sizeof(ventana_info.config)];
+static int econfig_init = -1;
+
+int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct ventana_eeprom_config *cfg;
+ struct ventana_board_info *info = &ventana_info;
+ int i;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ /* initialize */
+ if (econfig_init != 1) {
+ memcpy(econfig_bytes, info->config, sizeof(econfig_bytes));
+ econfig_init = 1;
+ }
+
+ /* list configs */
+ if ((strncmp(argv[1], "list", 4) == 0)) {
+ cfg = econfig;
+ while (cfg->name) {
+ printf("%s: %d\n", cfg->name,
+ test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
+ cfg++;
+ }
+ }
+
+ /* save */
+ else if ((strncmp(argv[1], "save", 4) == 0)) {
+ unsigned char *buf = (unsigned char *)info;
+ int chksum;
+
+ /* calculate new checksum */
+ memcpy(info->config, econfig_bytes, sizeof(econfig_bytes));
+ for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
+ chksum += buf[i];
+ debug("old chksum:0x%04x\n",
+ (info->chksum[0] << 8) | info->chksum[1]);
+ debug("new chksum:0x%04x\n", chksum);
+ info->chksum[0] = chksum >> 8;
+ info->chksum[1] = chksum & 0xff;
+
+ /* write new config data */
+ if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info,
+ 1, econfig_bytes, sizeof(econfig_bytes))) {
+ printf("EEPROM: Failed updating config\n");
+ return CMD_RET_FAILURE;
+ }
+
+ /* write new config data */
+ if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info,
+ 1, info->chksum, 2)) {
+ printf("EEPROM: Failed updating checksum\n");
+ return CMD_RET_FAILURE;
+ }
+
+ printf("Config saved to EEPROM\n");
+ }
+
+ /* get config */
+ else if (argc == 2) {
+ cfg = get_config(argv[1]);
+ if (cfg) {
+ printf("%s: %d\n", cfg->name,
+ test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
+ } else {
+ printf("invalid config: %s\n", argv[1]);
+ return CMD_RET_FAILURE;
+ }
+ }
+
+ /* set config */
+ else if (argc == 3) {
+ cfg = get_config(argv[1]);
+ if (cfg) {
+ if (simple_strtol(argv[2], NULL, 10)) {
+ test_and_set_bit(cfg->bit, econfig_bytes);
+ printf("Enabled %s\n", cfg->name);
+ } else {
+ test_and_clear_bit(cfg->bit, econfig_bytes);
+ printf("Disabled %s\n", cfg->name);
+ }
+ } else {
+ printf("invalid config: %s\n", argv[1]);
+ return CMD_RET_FAILURE;
+ }
+ }
+
+ else
+ return CMD_RET_USAGE;
+
+ return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+ econfig, 3, 0, do_econfig,
+ "EEPROM configuration",
+ "list - list config\n"
+ "save - save config to EEPROM\n"
+ "<name> - get config 'name'\n"
+ "<name> [0|1] - set config 'name' to value\n"
+);
+
+#endif /* CONFIG_CMD_EECONFIG */
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 2915b90..a222921 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -50,10 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define GP_RS232_EN IMX_GPIO_NR(2, 11)
#define GP_MSATA_SEL IMX_GPIO_NR(2, 8)
-/* I2C bus numbers */
-#define I2C_GSC 0
-#define I2C_PMIC 1
-
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
@@ -89,7 +85,7 @@ DECLARE_GLOBAL_DATA_PTR;
* EEPROM board info struct populated by read_eeprom so that we only have to
* read it once.
*/
-static struct ventana_board_info ventana_info;
+struct ventana_board_info ventana_info;
int board_type;
@@ -922,7 +918,7 @@ int power_init_board(void)
/* configure PFUZE100 PMIC */
if (board_type == GW54xx || board_type == GW54proto) {
- power_pfuze100_init(I2C_PMIC);
+ power_pfuze100_init(CONFIG_I2C_PMIC);
p = pmic_get("PFUZE100");
if (p && !pmic_probe(p)) {
pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
@@ -944,7 +940,7 @@ int power_init_board(void)
/* configure LTC3676 PMIC */
else {
- power_ltc3676_init(I2C_PMIC);
+ power_ltc3676_init(CONFIG_I2C_PMIC);
p = pmic_get("LTC3676_PMIC");
if (p && !pmic_probe(p)) {
puts("PMIC: LTC3676\n");
@@ -1175,7 +1171,7 @@ int board_init(void)
setup_sata();
#endif
/* read Gateworks EEPROM into global struct (used later) */
- board_type = read_eeprom(I2C_GSC, &ventana_info);
+ board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
/* board-specifc GPIO iomux */
SETUP_IOMUX_PADS(gw_gpio_pads);
@@ -1223,7 +1219,7 @@ int checkboard(void)
return 0;
/* Display GSC firmware revision/CRC/status */
- i2c_set_bus_num(I2C_GSC);
+ i2c_set_bus_num(CONFIG_I2C_GSC);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_FWVER, 1, buf, 1)) {
printf("GSC: v%d", buf[0]);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, buf, 4)) {
@@ -1353,7 +1349,7 @@ int misc_init_r(void)
*
* Disable the boot watchdog and display/clear the timeout flag if set
*/
- i2c_set_bus_num(I2C_GSC);
+ i2c_set_bus_num(CONFIG_I2C_GSC);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1)) {
reg |= (1 << GSC_SC_CTRL1_WDDIS);
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
@@ -1374,74 +1370,6 @@ int misc_init_r(void)
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-/* FDT aliases associated with EEPROM config bits */
-const char *fdt_aliases[] = {
- "ethernet0",
- "ethernet1",
- "hdmi_out",
- "ahci0",
- "pcie",
- "ssi0",
- "ssi1",
- "lcd0",
- "lvds0",
- "lvds1",
- "usb0",
- "usb1",
- "mmc0",
- "mmc1",
- "mmc2",
- "mmc3",
- "uart0",
- "uart1",
- "uart2",
- "uart3",
- "uart4",
- "ipu0",
- "ipu1",
- "can0",
- "mipi_dsi",
- "mipi_csi",
- "tzasc0",
- "tzasc1",
- "i2c0",
- "i2c1",
- "i2c2",
- "vpu",
- "csi0",
- "csi1",
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- "spi0",
- "spi1",
- "spi2",
- "spi3",
- "spi4",
- "spi5",
- NULL,
- NULL,
- "pps",
- NULL,
- NULL,
- NULL,
- "hdmi_in",
- "cvbs_out",
- "cvbs_in",
- "nand",
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
-};
-
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
@@ -1453,8 +1381,8 @@ const char *fdt_aliases[] = {
*/
void ft_board_setup(void *blob, bd_t *bd)
{
- int bit;
struct ventana_board_info *info = &ventana_info;
+ struct ventana_eeprom_config *cfg;
struct node_info nodes[] = {
{ "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
@@ -1489,9 +1417,17 @@ void ft_board_setup(void *blob, bd_t *bd)
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.
*/
- for (bit = 0; bit < 64; bit++) {
- if (!test_bit(bit, info->config))
- fdt_del_node_and_alias(blob, fdt_aliases[bit]);
+ if (getenv("fdt_noconfig")) {
+ puts(" Skiping periperhal config (fdt_noconfig defined)\n");
+ return;
+ }
+ cfg = econfig;
+ while (cfg->name) {
+ if (!test_bit(cfg->bit, info->config)) {
+ fdt_del_node_and_alias(blob, cfg->dtalias ?
+ cfg->dtalias : cfg->name);
+ }
+ cfg++;
}
}
#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 5b065be..d64b910 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -110,8 +110,19 @@ enum {
GW53xx,
GW54xx,
GW_UNKNOWN,
+ GW_BADCRC,
};
+/* config items */
+struct ventana_eeprom_config {
+ const char *name; /* name of item */
+ const char *dtalias; /* name of dt node to remove if not set */
+ int bit; /* bit within config */
+};
+
+extern struct ventana_eeprom_config econfig[];
+extern struct ventana_board_info ventana_info;
+
int read_eeprom(int bus, struct ventana_board_info *);
#endif
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 8197a72..b991b09 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -95,7 +95,9 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_I2C_GSC 0
+#define CONFIG_I2C_PMIC 1
/* MMC Configs */
#define CONFIG_FSL_ESDHC
@@ -164,6 +166,7 @@
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GSC
+#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
#define CONFIG_LZO