diff options
524 files changed, 17526 insertions, 10023 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 9485070..4b91b0f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -262,10 +262,6 @@ Sangmoon Kim <dogoil@etinsys.com> debris MPC8245 KVME080 MPC8245 -Thomas Lange <thomas@corelatus.se> - - GTH MPC860 - Robert Lazarski <robertlazarski@gmail.com> ATUM8548 MPC8548 @@ -428,6 +424,7 @@ Heiko Schocher <hs@denx.de> sc3 PPC405GP suen3 ARM926EJS (Kirkwood SoC) uc101 MPC5200 + ve8313 MPC8313 Peter De Schrijver <p2@mind.be> @@ -447,6 +444,7 @@ Timur Tabi <timur@freescale.com> MPC8349E-mITX MPC8349 MPC8349E-mITX-GP MPC8349 + P1022DS P1022 Erik Theisen <etheisen@mindspring.com> @@ -490,6 +488,10 @@ Stephen Williams <steve@icarus.com> JSE PPC405GPr +Ilya Yanok <yanok@emcraft.com> + + MPC8308RDB MPC8308 + Roy Zang <tie-fei.zang@freescale.com> mpc7448hpc2 MPC7448 @@ -550,7 +552,7 @@ Stefano Babic <sbabic@denx.de> Dirk Behme <dirk.behme@gmail.com> - omap3_beagle ARM CORTEX-A8 (OMAP3530 SoC) + omap3_beagle ARM ARMV7 (OMAP3530 SoC) Eric Benard <eric@eukrea.com> @@ -616,11 +618,11 @@ Kshitij Gupta <kshitij@ti.com> Vaibhav Hiremath <hvaibhav@ti.com> - am3517_evm ARM CORTEX-A8 (AM35x SoC) + am3517_evm ARM ARMV7 (AM35x SoC) Grazvydas Ignotas <notasas@gmail.com> - omap3_pandora ARM CORTEX-A8 (OMAP3xx SoC) + omap3_pandora ARM ARMV7 (OMAP3xx SoC) Gary Jennejohn <garyj@denx.de> @@ -650,12 +652,12 @@ Nishant Kamat <nskamat@ti.com> Minkyu Kang <mk7.kang@samsung.com> - s5p_goni ARM CORTEX-A8 (S5PC110 SoC) - SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) + s5p_goni ARM ARMV7 (S5PC110 SoC) + SMDKC100 ARM ARMV7 (S5PC100 SoC) Frederik Kriewitz <frederik@kriewitz.eu> - devkit8000 ARM CORTEX-A8 (OMAP3530 SoC) + devkit8000 ARM ARMV7 (OMAP3530 SoC) Sergey Kubushyn <ksi@koi8.net> @@ -680,8 +682,8 @@ Sergey Lapin <slapin@ossfans.org> Nishanth Menon <nm@ti.com> - omap3_sdp3430 ARM CORTEX-A8 (OMAP3xx SoC) - omap3_zoom1 ARM CORTEX-A8 (OMAP3xx SoC) + omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC) + omap3_zoom1 ARM ARMV7 (OMAP3xx SoC) David Müller <d.mueller@elsoft.ch> @@ -719,7 +721,7 @@ Dave Peverley <dpeverley@mpc-data.co.uk> Manikandan Pillai <mani.pillai@ti.com> - omap3_evm ARM CORTEX-A8 (OMAP3xx SoC) + omap3_evm ARM ARMV7 (OMAP3xx SoC) Stelian Pop <stelian.pop@leadtechdesign.com> @@ -731,7 +733,7 @@ Stelian Pop <stelian.pop@leadtechdesign.com> Tom Rix <Tom.Rix@windriver.com> - omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC) + omap3_zoom2 ARM ARMV7 (OMAP3xx SoC) John Rigby <jcrigby@gmail.com> @@ -750,7 +752,9 @@ Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com> Steve Sakoman <sakoman@gmail.com> - omap3_overo ARM CORTEX-A8 (OMAP3xx SoC) + omap3_overo ARM ARMV7 (OMAP3xx SoC) + omap4_panda ARM ARMV7 (OMAP4xx SoC) + omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC) Jens Scharsig <esw@bus-elektronik.de> @@ -869,9 +873,6 @@ Scott McNutt <smcnutt@psyent.com> PCI5441 Nios-II PK1C20 Nios-II - EP1C20 Nios-II - EP1S10 Nios-II - EP1S40 Nios-II nios2-generic Nios-II ######################################################################### @@ -998,6 +999,8 @@ Blackfin Team <u-boot-devel@blackfin.uclinux.org> BF548-EZKIT BF548 BF561-EZKIT BF561 + BF527-AD7160-EVAL BF527 + Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> Blackfin Team <u-boot-devel@blackfin.uclinux.org> @@ -118,7 +118,6 @@ LIST_8xx=" \ GEN860T \ GEN860T_SC \ GENIETV \ - GTH \ hermes \ IAD210 \ ICU862_100MHz \ @@ -360,6 +359,7 @@ LIST_8260=" \ LIST_83xx=" \ caddy2 \ kmeter1 \ + MPC8308RDB \ MPC8313ERDB_33 \ MPC8313ERDB_NAND_66 \ MPC8315ERDB \ @@ -380,6 +380,7 @@ LIST_83xx=" \ sbc8349 \ SIMPC8313_LP \ TQM834x \ + ve8313 \ vme8349 \ " @@ -408,6 +409,7 @@ LIST_85xx=" \ MPC8569MDS_NAND \ MPC8572DS \ MPC8572DS_36BIT \ + P1022DS \ P2020DS \ P2020DS_36BIT \ P1011RDB \ @@ -644,9 +646,9 @@ LIST_ARM11=" \ " ######################################################################### -## ARM Cortex-A8 Systems +## ARMV7 Systems ######################################################################### -LIST_ARM_CORTEX_A8=" \ +LIST_ARMV7=" \ am3517_evm \ devkit8000 \ mx51evk \ @@ -657,6 +659,8 @@ LIST_ARM_CORTEX_A8=" \ omap3_sdp3430 \ omap3_zoom1 \ omap3_zoom2 \ + omap4_panda \ + omap4_sdp4430 \ s5p_goni \ smdkc100 \ " @@ -702,6 +706,7 @@ LIST_at91=" \ LIST_pxa=" \ cerf250 \ + colibri_pxa270 \ cradle \ csb226 \ delta \ @@ -711,10 +716,13 @@ LIST_pxa=" \ polaris \ pxa255_idp \ trizepsiv \ + vpac270_nor \ + vpac270_onenand \ wepep250 \ xaeniax \ xm250 \ xsengine \ + zipitz2 \ zylonite \ " @@ -739,7 +747,7 @@ LIST_arm=" \ ${LIST_ARM9} \ ${LIST_ARM10} \ ${LIST_ARM11} \ - ${LIST_ARM_CORTEX_A8} \ + ${LIST_ARMV7} \ ${LIST_at91} \ ${LIST_pxa} \ ${LIST_ixp} \ @@ -824,9 +832,6 @@ LIST_x86=" \ ######################################################################### LIST_nios2=" \ - EP1C20 \ - EP1S10 \ - EP1S40 \ PCI5441 \ PK1C20 \ nios2-generic \ @@ -892,6 +897,7 @@ LIST_avr32=" \ LIST_blackfin=" \ bf518f-ezbrd \ bf526-ezbrd \ + bf527-ad7160-eval \ bf527-ezkit \ bf527-ezkit-v2 \ bf533-ezkit \ @@ -1005,7 +1011,7 @@ print_stats() { for arg in $@ do case "$arg" in - arm|SA|ARM7|ARM9|ARM10|ARM11|ARM_CORTEX_A8|at91|ixp|pxa \ + arm|SA|ARM7|ARM9|ARM10|ARM11|ARMV7|at91|ixp|pxa \ |avr32 \ |blackfin \ |coldfire \ @@ -221,6 +221,7 @@ LIBS += drivers/power/libpower.a LIBS += drivers/spi/libspi.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a +LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a @@ -245,6 +246,13 @@ LIBS += lib/libfdt/libfdt.a LIBS += api/libapi.a LIBS += post/libpost.a +ifeq ($(SOC),omap3) +LIBS += $(CPUDIR)/omap-common/libomap-common.a +endif +ifeq ($(SOC),omap4) +LIBS += $(CPUDIR)/omap-common/libomap-common.a +endif + LIBS := $(addprefix $(obj),$(LIBS)) .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) @@ -2171,6 +2179,15 @@ trizepsiv_config : unconfig fi; @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv +vpac270_nor_config \ +vpac270_onenand_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring onenand,$@)" ] ; then \ + echo "#define CONFIG_ONENAND_U_BOOT" \ + >>$(obj)include/config.h ; \ + fi; + @$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270 + ######################################################################### ## ARM1136 Systems ######################################################################### @@ -2436,7 +2453,6 @@ clean: $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ - $(obj)arch/blackfin/lib/u-boot.lds \ $(obj)u-boot.lds \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h @@ -1495,6 +1495,16 @@ The following options need to be configured: #define I2C_DELAY udelay(2) + CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA + + If your arch supports the generic GPIO framework (asm/gpio.h), + then you may alternatively define the two GPIOs that are to be + used as SCL / SDA. Any of the previous I2C_xxx macros will + have GPIO-based defaults assigned to them as appropriate. + + You should define these to the GPIO value as given directly to + the generic GPIO functions. + CONFIG_SYS_I2C_INIT_BOARD When a board is reset during an i2c bus transfer diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index 6fc3902..c63e864 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -378,10 +378,10 @@ int arch_misc_init(void) } #endif /* CONFIG_ARCH_MISC_INIT */ -#ifdef CONFIG_KIRKWOOD_EGIGA +#ifdef CONFIG_MVGBE int cpu_eth_init(bd_t *bis) { - kirkwood_egiga_initialize(bis); + mvgbe_initialize(bis); return 0; } #endif diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c index 03c6d06..f3c1e21 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c +++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c @@ -268,3 +268,11 @@ int arch_misc_init(void) return 0; } #endif /* CONFIG_ARCH_MISC_INIT */ + +#ifdef CONFIG_MVGBE +int cpu_eth_init(bd_t *bis) +{ + mvgbe_initialize(bis); + return 0; +} +#endif diff --git a/arch/arm/cpu/arm_cortexa8/Makefile b/arch/arm/cpu/armv7/Makefile index ae20299..ae20299 100644 --- a/arch/arm/cpu/arm_cortexa8/Makefile +++ b/arch/arm/cpu/armv7/Makefile diff --git a/arch/arm/cpu/arm_cortexa8/config.mk b/arch/arm/cpu/armv7/config.mk index 49ac9c7..49ac9c7 100644 --- a/arch/arm/cpu/arm_cortexa8/config.mk +++ b/arch/arm/cpu/armv7/config.mk diff --git a/arch/arm/cpu/arm_cortexa8/cpu.c b/arch/arm/cpu/armv7/cpu.c index a01e0d6..a01e0d6 100644 --- a/arch/arm/cpu/arm_cortexa8/cpu.c +++ b/arch/arm/cpu/armv7/cpu.c diff --git a/arch/arm/cpu/arm_cortexa8/mx51/Makefile b/arch/arm/cpu/armv7/mx51/Makefile index 7cfaa2c..7cfaa2c 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/Makefile +++ b/arch/arm/cpu/armv7/mx51/Makefile diff --git a/arch/arm/cpu/arm_cortexa8/mx51/clock.c b/arch/arm/cpu/armv7/mx51/clock.c index a27227d..a27227d 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/clock.c +++ b/arch/arm/cpu/armv7/mx51/clock.c diff --git a/arch/arm/cpu/arm_cortexa8/mx51/iomux.c b/arch/arm/cpu/armv7/mx51/iomux.c index 62b2954..62b2954 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/iomux.c +++ b/arch/arm/cpu/armv7/mx51/iomux.c diff --git a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S b/arch/arm/cpu/armv7/mx51/lowlevel_init.S index 783c81f..783c81f 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx51/lowlevel_init.S diff --git a/arch/arm/cpu/arm_cortexa8/mx51/soc.c b/arch/arm/cpu/armv7/mx51/soc.c index f22ebe9..f22ebe9 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/soc.c +++ b/arch/arm/cpu/armv7/mx51/soc.c diff --git a/arch/arm/cpu/arm_cortexa8/mx51/speed.c b/arch/arm/cpu/armv7/mx51/speed.c index a444def..a444def 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/speed.c +++ b/arch/arm/cpu/armv7/mx51/speed.c diff --git a/arch/arm/cpu/arm_cortexa8/mx51/timer.c b/arch/arm/cpu/armv7/mx51/timer.c index 81c4a06..81c4a06 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/timer.c +++ b/arch/arm/cpu/armv7/mx51/timer.c diff --git a/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds b/arch/arm/cpu/armv7/mx51/u-boot.lds index 2953b93..d66434c 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds +++ b/arch/arm/cpu/armv7/mx51/u-boot.lds @@ -36,7 +36,7 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm_cortexa8/start.o + arch/arm/cpu/armv7/start.o *(.text) } diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile new file mode 100644 index 0000000..3a4a304 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libomap-common.a + +SOBJS := reset.o +COBJS := timer.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/altera/ep1s10/config.mk b/arch/arm/cpu/armv7/omap-common/config.mk index dab2740..49ac9c7 100644 --- a/board/altera/ep1s10/config.mk +++ b/arch/arm/cpu/armv7/omap-common/config.mk @@ -1,6 +1,6 @@ # -# (C) Copyright 2005, Psyent Corporation <www.psyent.com> -# Scott McNutt <smcnutt@psyent.com> +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> # # See file CREDITS for list of people who contributed to this # project. @@ -20,12 +20,14 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # +PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float -TEXT_BASE = 0x01fc0000 - -PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\ + $(call cc-option,-malignment-traps,)) diff --git a/arch/arm/cpu/arm_cortexa8/omap3/reset.S b/arch/arm/cpu/armv7/omap-common/reset.S index a53c408..a53c408 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/reset.S +++ b/arch/arm/cpu/armv7/omap-common/reset.S diff --git a/arch/arm/cpu/arm_cortexa8/omap3/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 401bfe6..69e285f 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -84,6 +84,11 @@ void set_timer(ulong t) /* delay x useconds */ void __udelay(unsigned long usec) { +#if defined(CONFIG_OMAP44XX) + /* TODO temporary hack until OMAP4 clock setup routines are present */ + if (usec > 1000) + usec = usec/1000; +#endif long tmo = usec * (TIMER_CLOCK / 1000) / 1000; unsigned long now, last = readl(&timer_base->tcrr); diff --git a/arch/arm/cpu/arm_cortexa8/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index 7d63c6b..79ae267 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -27,7 +27,6 @@ LIB = $(obj)lib$(SOC).a SOBJS := lowlevel_init.o SOBJS += cache.o -SOBJS += reset.o COBJS += board.o COBJS += clock.o @@ -35,7 +34,6 @@ COBJS += gpio.o COBJS += mem.o COBJS += syslib.o COBJS += sys_info.o -COBJS += timer.o COBJS-$(CONFIG_EMIF4) += emif4.o COBJS-$(CONFIG_SDRC) += sdrc.o diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 69e56f5..69e56f5 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S index 4b65ac5..4b65ac5 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/cache.S +++ b/arch/arm/cpu/armv7/omap3/cache.S diff --git a/arch/arm/cpu/arm_cortexa8/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 6330c9e..6330c9e 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index fae5b11..fae5b11 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/gpio.c b/arch/arm/cpu/armv7/omap3/gpio.c index aeb6066..aeb6066 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/gpio.c +++ b/arch/arm/cpu/armv7/omap3/gpio.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 73063ec..73063ec 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S diff --git a/arch/arm/cpu/arm_cortexa8/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index bd914b0..bd914b0 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 96fd990c..96fd990c 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c index 1df4401..1df4401 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c +++ b/arch/arm/cpu/armv7/omap3/sys_info.c diff --git a/arch/arm/cpu/arm_cortexa8/omap3/syslib.c b/arch/arm/cpu/armv7/omap3/syslib.c index 9ced495..9ced495 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/syslib.c +++ b/arch/arm/cpu/armv7/omap3/syslib.c diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile new file mode 100644 index 0000000..d926fbb --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2010 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +SOBJS += lowlevel_init.o + +COBJS += board.o +COBJS += mem.o +COBJS += sys_info.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c new file mode 100644 index 0000000..5bf7173 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -0,0 +1,90 @@ +/* + * + * Common functions for OMAP4 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> + +/* + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called path is with SRAM stack. + */ +void s_init(void) +{ + watchdog_init(); +} + +/* + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + */ +void wait_for_command_complete(struct watchdog *wd_base) +{ + int pending = 1; + do { + pending = readl(&wd_base->wwps); + } while (pending); +} + +/* + * Routine: watchdog_init + * Description: Shut down watch dogs + */ +void watchdog_init(void) +{ + struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE; + + writel(WD_UNLOCK1, &wd2_base->wspr); + wait_for_command_complete(wd2_base); + writel(WD_UNLOCK2, &wd2_base->wspr); +} + +/* + * Routine: dram_init + * Description: sets uboots idea of sdram size + */ +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = 0x80000000; + gd->bd->bi_dram[0].size = 512 << 20; + return 0; +} + +/* + * Print board information + */ +int checkboard(void) +{ + puts(sysinfo.board_string); + return 0; +} + diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap4/lowlevel_init.S new file mode 100644 index 0000000..9a181eb --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/lowlevel_init.S @@ -0,0 +1,48 @@ +/* + * Board specific setup info + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/omap4.h> + +.globl lowlevel_init +lowlevel_init: + /* + * Setup a temporary stack + */ + ldr sp, =LOW_LEVEL_SRAM_STACK + + /* + * Save the old lr(passed in ip) and the current lr to stack + */ + push {ip, lr} + + /* + * go setup pll, mux, memory + */ + bl s_init + pop {ip, pc} + diff --git a/arch/arm/cpu/armv7/omap4/mem.c b/arch/arm/cpu/armv7/omap4/mem.c new file mode 100644 index 0000000..878f0e3 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/mem.c @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> + +struct gpmc *gpmc_cfg; + +/***************************************************** + * gpmc_init(): init gpmc bus + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + gpmc_cfg = (struct gpmc *)GPMC_BASE; + + /* global settings */ + writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ + writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ + + /* + * Disable the GPMC0 config set by ROM code + * It conflicts with our MPDB (both at 0x08000000) + */ + writel(0, &gpmc_cfg->cs[0].config7); +} diff --git a/arch/arm/cpu/armv7/omap4/sys_info.c b/arch/arm/cpu/armv7/omap4/sys_info.c new file mode 100644 index 0000000..3b73191 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/sys_info.c @@ -0,0 +1,54 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> + +/* + * get_device_type(): tell if GP/HS/EMU/TST + */ +u32 get_device_type(void) +{ + return 0; +} + +/* + * get_board_rev() - get board revision + */ +u32 get_board_rev(void) +{ + return 0x20; +} + +/* + * Print CPU information + */ +int print_cpuinfo(void) +{ + + puts("CPU : OMAP4430\n"); + + return 0; +} + diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile b/arch/arm/cpu/armv7/s5pc1xx/Makefile index 3785593..3785593 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile +++ b/arch/arm/cpu/armv7/s5pc1xx/Makefile diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S index 906118d..7734b32 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S +++ b/arch/arm/cpu/armv7/s5pc1xx/cache.S @@ -2,7 +2,7 @@ * Copyright (C) 2009 Samsung Electronics * Minkyu Kang <mk7.kang@samsung.com> * - * based on arch/arm/cpu/arm_cortexa8/omap3/cache.S + * based on arch/arm/cpu/armv7/omap3/cache.S * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c b/arch/arm/cpu/armv7/s5pc1xx/clock.c index 19619f9..19619f9 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c +++ b/arch/arm/cpu/armv7/s5pc1xx/clock.c diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c b/arch/arm/cpu/armv7/s5pc1xx/cpu_info.c index f16c0ff..f16c0ff 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c +++ b/arch/arm/cpu/armv7/s5pc1xx/cpu_info.c diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S b/arch/arm/cpu/armv7/s5pc1xx/reset.S index 7f6ff9c..7f6ff9c 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S +++ b/arch/arm/cpu/armv7/s5pc1xx/reset.S diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c b/arch/arm/cpu/armv7/s5pc1xx/sromc.c index 380be81..380be81 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c +++ b/arch/arm/cpu/armv7/s5pc1xx/sromc.c diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c b/arch/arm/cpu/armv7/s5pc1xx/timer.c index c5df5c5..c5df5c5 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c +++ b/arch/arm/cpu/armv7/s5pc1xx/timer.c diff --git a/arch/arm/cpu/arm_cortexa8/start.S b/arch/arm/cpu/armv7/start.S index 1e0a150..1e0a150 100644 --- a/arch/arm/cpu/arm_cortexa8/start.S +++ b/arch/arm/cpu/armv7/start.S diff --git a/arch/arm/cpu/arm_cortexa8/u-boot.lds b/arch/arm/cpu/armv7/u-boot.lds index 820e3a1..9e5b5a9 100644 --- a/arch/arm/cpu/arm_cortexa8/u-boot.lds +++ b/arch/arm/cpu/armv7/u-boot.lds @@ -34,7 +34,7 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm_cortexa8/start.o (.text) + arch/arm/cpu/armv7/start.o (.text) *(.text) } diff --git a/arch/arm/cpu/pxa/pxafb.c b/arch/arm/cpu/pxa/pxafb.c index d56c5f0..524a03b 100644 --- a/arch/arm/cpu/pxa/pxafb.c +++ b/arch/arm/cpu/pxa/pxafb.c @@ -112,6 +112,39 @@ vidinfo_t panel_info = { vl_efw: 0, }; #endif /* CONFIG_SHARP_LM8V31 */ +/*----------------------------------------------------------------------*/ +#ifdef CONFIG_VOIPAC_LCD + +# define LCD_BPP LCD_COLOR8 +# define LCD_INVERT_COLORS + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x043008f8 +# define REG_LCCR3 0x0340FF08 + +vidinfo_t panel_info = { + vl_col: 640, + vl_row: 480, + vl_width: 157, + vl_height: 118, + vl_clkp: CONFIG_SYS_HIGH, + vl_oep: CONFIG_SYS_HIGH, + vl_hsp: CONFIG_SYS_HIGH, + vl_vsp: CONFIG_SYS_HIGH, + vl_dp: CONFIG_SYS_HIGH, + vl_bpix: LCD_BPP, + vl_lbw: 0, + vl_splt: 1, + vl_clor: 1, + vl_tft: 1, + vl_hpw: 32, + vl_blw: 144, + vl_elw: 32, + vl_vpw: 2, + vl_bfw: 13, + vl_efw: 30, +}; +#endif /* CONFIG_VOIPAC_LCD */ /*----------------------------------------------------------------------*/ #ifdef CONFIG_HITACHI_SX14 @@ -147,6 +180,40 @@ vidinfo_t panel_info = { #endif /* CONFIG_HITACHI_SX14 */ /*----------------------------------------------------------------------*/ +#ifdef CONFIG_LMS283GF05 + +# define LCD_BPP LCD_COLOR8 +//# define LCD_INVERT_COLORS + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x043008f8 +# define REG_LCCR3 0x03b00009 + +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_width: 240, + vl_height: 320, + vl_clkp: CONFIG_SYS_HIGH, + vl_oep: CONFIG_SYS_LOW, + vl_hsp: CONFIG_SYS_LOW, + vl_vsp: CONFIG_SYS_LOW, + vl_dp: CONFIG_SYS_HIGH, + vl_bpix: LCD_BPP, + vl_lbw: 0, + vl_splt: 1, + vl_clor: 1, + vl_tft: 1, + vl_hpw: 4, + vl_blw: 4, + vl_elw: 8, + vl_vpw: 4, + vl_bfw: 4, + vl_efw: 8, +}; +#endif /* CONFIG_LMS283GF05 */ + +/*----------------------------------------------------------------------*/ #if LCD_BPP == LCD_COLOR8 void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); @@ -292,7 +359,9 @@ static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid) return 0; } - +#ifdef CONFIG_CPU_MONAHANS +static inline void pxafb_setup_gpio (vidinfo_t *vid) {} +#else static void pxafb_setup_gpio (vidinfo_t *vid) { u_long lccr0; @@ -349,6 +418,7 @@ static void pxafb_setup_gpio (vidinfo_t *vid) printf("pxafb_setup_gpio: unable to determine bits per pixel\n"); } } +#endif static void pxafb_enable_controller (vidinfo_t *vid) { @@ -363,7 +433,11 @@ static void pxafb_enable_controller (vidinfo_t *vid) FDADR1 = vid->pxa.fdadr1; LCCR0 |= LCCR0_ENB; +#ifdef CONFIG_CPU_MONAHANS + CKENA |= CKENA_1_LCD; +#else CKEN |= CKEN16_LCD; +#endif debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0); debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1); diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index e07c8c2..8010b0e 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -34,6 +34,25 @@ .globl _start _start: b reset +#ifdef CONFIG_PRELOADER + ldr pc, _hang + ldr pc, _hang + ldr pc, _hang + ldr pc, _hang + ldr pc, _hang + ldr pc, _hang + ldr pc, _hang + +_hang: + .word do_hang + .word 0x12345678 + .word 0x12345678 + .word 0x12345678 + .word 0x12345678 + .word 0x12345678 + .word 0x12345678 + .word 0x12345678 /* now 16*4=64 */ +#else ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort @@ -49,6 +68,7 @@ _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq +#endif /* CONFIG_PRELOADER */ .balignl 16,0xdeadbeef @@ -117,8 +137,10 @@ reset: relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ +#ifndef CONFIG_PRELOADER cmp r0, r1 /* don't reloc during debug */ beq stack_setup +#endif ldr r2, _armboot_start ldr r3, _bss_start @@ -135,28 +157,37 @@ copy_loop: /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ +#ifdef CONFIG_PRELOADER + sub sp, r0, #128 /* leave 32 words for abort-stack */ +#else + sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ + sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif /* CONFIG_USE_IRQ */ sub sp, r0, #12 /* leave 3 words for abort-stack */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ +#endif clear_bss: ldr r0, _bss_start /* find start of bss segment */ ldr r1, _bss_end /* stop here */ mov r2, #0x00000000 /* clear */ +#ifndef CONFIG_PRELOADER clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 ble clbss_l +#endif ldr pc, _start_armboot +#ifdef CONFIG_ONENAND_IPL +_start_armboot: .word start_oneboot +#else _start_armboot: .word start_armboot - +#endif /****************************************************************************/ /* */ @@ -296,7 +327,7 @@ setspeed_done: */ mov pc, lr - +#ifndef CONFIG_PRELOADER /****************************************************************************/ /* */ /* Interrupt handling */ @@ -394,6 +425,7 @@ setspeed_done: .macro get_fiq_stack @ setup FIQ stack ldr sp, FIQ_STACK_START .endm +#endif /* CONFIG_PRELOADER */ /****************************************************************************/ @@ -402,6 +434,12 @@ setspeed_done: /* */ /****************************************************************************/ +#ifdef CONFIG_PRELOADER + .align 5 +do_hang: + ldr sp, _TEXT_BASE /* use 32 words abort stack */ + bl hang /* hang and never return */ +#else /* !CONFIG_PRELOADER */ .align 5 undefined_instruction: get_bad_stack @@ -461,7 +499,7 @@ fiq: get_bad_stack bad_save_user_regs bl do_fiq - +#endif /* CONFIG_PRELOADER */ #endif /* CONFIG_USE_IRQ */ /****************************************************************************/ diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h index 2470efb..9edb0be 100644 --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h +++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h @@ -60,6 +60,11 @@ #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) #define KW_EGIGA1_BASE (KW_REGISTER(0x76000)) +/* Kirkwood GbE controller has two ports */ +#define MAX_MVGBE_DEVS 2 +#define MVGBE0_BASE KW_EGIGA0_BASE +#define MVGBE1_BASE KW_EGIGA1_BASE + #if defined (CONFIG_KW88F6281) #include <asm/arch/kw88f6281.h> #elif defined (CONFIG_KW88F6192) diff --git a/arch/arm/include/asm/arch-mx51/asm-offsets.h b/arch/arm/include/asm/arch-mx51/asm-offsets.h index fbba412..afd2728 100644 --- a/arch/arm/include/asm/arch-mx51/asm-offsets.h +++ b/arch/arm/include/asm/arch-mx51/asm-offsets.h @@ -1,5 +1,5 @@ /* - * needed for arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S + * needed for arch/arm/cpu/armv7/mx51/lowlevel_init.S * * These should be auto-generated */ diff --git a/arch/arm/include/asm/arch-omap3/i2c.h b/arch/arm/include/asm/arch-omap3/i2c.h index 490e03b..7a4a73a 100644 --- a/arch/arm/include/asm/arch-omap3/i2c.h +++ b/arch/arm/include/asm/arch-omap3/i2c.h @@ -20,9 +20,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -#ifndef _I2C_H_ -#define _I2C_H_ +#ifndef _OMAP3_I2C_H_ +#define _OMAP3_I2C_H_ +#define I2C_BUS_MAX 3 #define I2C_DEFAULT_BASE I2C_BASE1 struct i2c { @@ -58,146 +59,4 @@ struct i2c { unsigned short res15; }; -#define I2C_BUS_MAX 3 - -/* I2C masks */ - -/* I2C Interrupt Enable Register (I2C_IE): */ -#define I2C_IE_GC_IE (1 << 5) -#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ -#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ -#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ -#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ - -/* I2C Status Register (I2C_STAT): */ - -#define I2C_STAT_SBD (1 << 15) /* Single byte data */ -#define I2C_STAT_BB (1 << 12) /* Bus busy */ -#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ -#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ -#define I2C_STAT_AAS (1 << 9) /* Address as slave */ -#define I2C_STAT_GC (1 << 5) -#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ -#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ -#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ -#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ - -/* I2C Interrupt Code Register (I2C_INTCODE): */ - -#define I2C_INTCODE_MASK 7 -#define I2C_INTCODE_NONE 0 -#define I2C_INTCODE_AL 1 /* Arbitration lost */ -#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ -#define I2C_INTCODE_ARDY 3 /* Register access ready */ -#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ -#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ - -/* I2C Buffer Configuration Register (I2C_BUF): */ - -#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ -#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ - -/* I2C Configuration Register (I2C_CON): */ - -#define I2C_CON_EN (1 << 15) /* I2C module enable */ -#define I2C_CON_BE (1 << 14) /* Big endian mode */ -#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ -#define I2C_CON_MST (1 << 10) /* Master/slave mode */ -#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ - /* (master mode only) */ -#define I2C_CON_XA (1 << 8) /* Expand address */ -#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ -#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ - -/* I2C System Test Register (I2C_SYSTEST): */ - -#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ -#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */ -#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ -#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ -#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ -#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ -#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ -#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ - -#define I2C_SCLL_SCLL 0 -#define I2C_SCLL_SCLL_M 0xFF -#define I2C_SCLL_HSSCLL 8 -#define I2C_SCLH_HSSCLL_M 0xFF -#define I2C_SCLH_SCLH 0 -#define I2C_SCLH_SCLH_M 0xFF -#define I2C_SCLH_HSSCLH 8 -#define I2C_SCLH_HSSCLH_M 0xFF - -#define OMAP_I2C_STANDARD 100000 -#define OMAP_I2C_FAST_MODE 400000 -#define OMAP_I2C_HIGH_SPEED 3400000 - -#define SYSTEM_CLOCK_12 12000000 -#define SYSTEM_CLOCK_13 13000000 -#define SYSTEM_CLOCK_192 19200000 -#define SYSTEM_CLOCK_96 96000000 - -/* Use the reference value of 96MHz if not explicitly set by the board */ -#ifndef I2C_IP_CLK -#define I2C_IP_CLK SYSTEM_CLOCK_96 -#endif - -/* - * The reference minimum clock for high speed is 19.2MHz. - * The linux 2.6.30 kernel uses this value. - * The reference minimum clock for fast mode is 9.6MHz - * The reference minimum clock for standard mode is 4MHz - * In TRM, the value of 12MHz is used. - */ -#ifndef I2C_INTERNAL_SAMPLING_CLK -#define I2C_INTERNAL_SAMPLING_CLK 19200000 -#endif - -/* - * The equation for the low and high time is - * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed - * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed - * - * If the duty cycle is 50% - * - * tlow = scll + scll_trim = sampling clock / (2 * speed) - * thigh = sclh + sclh_trim = sampling clock / (2 * speed) - * - * In TRM - * scll_trim = 7 - * sclh_trim = 5 - * - * The linux 2.6.30 kernel uses - * scll_trim = 6 - * sclh_trim = 6 - * - * These are the trim values for standard and fast speed - */ -#ifndef I2C_FASTSPEED_SCLL_TRIM -#define I2C_FASTSPEED_SCLL_TRIM 6 -#endif -#ifndef I2C_FASTSPEED_SCLH_TRIM -#define I2C_FASTSPEED_SCLH_TRIM 6 -#endif - -/* These are the trim values for high speed */ -#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM -#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM -#endif -#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM -#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM -#endif -#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM -#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM -#endif -#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM -#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM -#endif - -#define I2C_PSC_MAX 0x0f -#define I2C_PSC_MIN 0x00 - -#endif /* _I2C_H_ */ +#endif /* _OMAP3_I2C_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h index aa751c9..43dd705 100644 --- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h @@ -29,13 +29,20 @@ #define T2_BASE 0x48002000 typedef struct t2 { - unsigned char res1[0x274]; + unsigned char res1[0x274]; /* 0x000 */ unsigned int devconf0; /* 0x274 */ - unsigned char res2[0x2A8]; + unsigned char res2[0x060]; /* 0x278 */ + unsigned int devconf1; /* 0x2D8 */ + unsigned char res3[0x244]; /* 0x2DC */ unsigned int pbias_lite; /* 0x520 */ } t2_t; #define MMCSDIO1ADPCLKISEL (1 << 24) +#define MMCSDIO2ADPCLKISEL (1 << 6) + +#define EN_MMC1 (1 << 24) +#define EN_MMC2 (1 << 25) +#define EN_MMC3 (1 << 30) #define PBIASLITEPWRDNZ0 (1 << 1) #define PBIASSPEEDCTRL0 (1 << 2) @@ -44,7 +51,9 @@ typedef struct t2 { /* * OMAP HSMMC register definitions */ -#define OMAP_HSMMC_BASE 0x4809C000 +#define OMAP_HSMMC1_BASE 0x4809C000 +#define OMAP_HSMMC2_BASE 0x480B4000 +#define OMAP_HSMMC3_BASE 0x480AD000 typedef struct hsmmc { unsigned char res1[0x10]; diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h new file mode 100644 index 0000000..c056b95 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2006-2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _CPU_H +#define _CPU_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ +struct gpmc_cs { + u32 config1; /* 0x00 */ + u32 config2; /* 0x04 */ + u32 config3; /* 0x08 */ + u32 config4; /* 0x0C */ + u32 config5; /* 0x10 */ + u32 config6; /* 0x14 */ + u32 config7; /* 0x18 */ + u32 nand_cmd; /* 0x1C */ + u32 nand_adr; /* 0x20 */ + u32 nand_dat; /* 0x24 */ + u8 res[8]; /* blow up to 0x30 byte */ +}; + +struct gpmc { + u8 res1[0x10]; + u32 sysconfig; /* 0x10 */ + u8 res2[0x4]; + u32 irqstatus; /* 0x18 */ + u32 irqenable; /* 0x1C */ + u8 res3[0x20]; + u32 timeout_control; /* 0x40 */ + u8 res4[0xC]; + u32 config; /* 0x50 */ + u32 status; /* 0x54 */ + u8 res5[0x8]; /* 0x58 */ + struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ + u8 res6[0x14]; /* 0x1E0 */ + u32 ecc_config; /* 0x1F4 */ + u32 ecc_control; /* 0x1F8 */ + u32 ecc_size_config; /* 0x1FC */ + u32 ecc1_result; /* 0x200 */ + u32 ecc2_result; /* 0x204 */ + u32 ecc3_result; /* 0x208 */ + u32 ecc4_result; /* 0x20C */ + u32 ecc5_result; /* 0x210 */ + u32 ecc6_result; /* 0x214 */ + u32 ecc7_result; /* 0x218 */ + u32 ecc8_result; /* 0x21C */ + u32 ecc9_result; /* 0x220 */ +}; + +/* Used for board specific gpmc initialization */ +extern struct gpmc *gpmc_cfg; + +struct gptimer { + u32 tidr; /* 0x00 r */ + u8 res[0xc]; + u32 tiocp_cfg; /* 0x10 rw */ + u32 tistat; /* 0x14 r */ + u32 tisr; /* 0x18 rw */ + u32 tier; /* 0x1c rw */ + u32 twer; /* 0x20 rw */ + u32 tclr; /* 0x24 rw */ + u32 tcrr; /* 0x28 rw */ + u32 tldr; /* 0x2c rw */ + u32 ttgr; /* 0x30 rw */ + u32 twpc; /* 0x34 r */ + u32 tmar; /* 0x38 rw */ + u32 tcar1; /* 0x3c r */ + u32 tcicr; /* 0x40 rw */ + u32 tcar2; /* 0x44 r */ +}; +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +/* enable sys_clk NO-prescale /1 */ +#define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0)) + +/* Watchdog */ +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ +struct watchdog { + u8 res1[0x34]; + u32 wwps; /* 0x34 r */ + u8 res2[0x10]; + u32 wspr; /* 0x48 rw */ +}; +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +#define SYSCLKDIV_1 (0x1 << 6) +#define SYSCLKDIV_2 (0x1 << 7) + +#define CLKSEL_GPT1 (0x1 << 0) + +#define EN_GPT1 (0x1 << 0) +#define EN_32KSYNC (0x1 << 2) + +#define ST_WDT2 (0x1 << 5) + +#define RESETDONE (0x1 << 0) + +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* GPMC BASE */ +#define GPMC_BASE (OMAP44XX_GPMC_BASE) + +/* I2C base */ +#define I2C_BASE1 (OMAP44XX_L4_PER_BASE + 0x70000) +#define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000) +#define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000) + +#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-omap4/i2c.h b/arch/arm/include/asm/arch-omap4/i2c.h new file mode 100644 index 0000000..a91b4c2 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/i2c.h @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2004-2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP4_I2C_H_ +#define _OMAP4_I2C_H_ + +#define I2C_BUS_MAX 3 +#define I2C_DEFAULT_BASE I2C_BASE1 + +struct i2c { + unsigned short revnb_lo; /* 0x00 */ + unsigned short res1; + unsigned short revnb_hi; /* 0x04 */ + unsigned short res2[13]; + unsigned short sysc; /* 0x20 */ + unsigned short res3; + unsigned short irqstatus_raw; /* 0x24 */ + unsigned short res4; + unsigned short stat; /* 0x28 */ + unsigned short res5; + unsigned short ie; /* 0x2C */ + unsigned short res6; + unsigned short irqenable_clr; /* 0x30 */ + unsigned short res7; + unsigned short iv; /* 0x34 */ + unsigned short res8[45]; + unsigned short syss; /* 0x90 */ + unsigned short res9; + unsigned short buf; /* 0x94 */ + unsigned short res10; + unsigned short cnt; /* 0x98 */ + unsigned short res11; + unsigned short data; /* 0x9C */ + unsigned short res13; + unsigned short res14; /* 0xA0 */ + unsigned short res15; + unsigned short con; /* 0xA4 */ + unsigned short res16; + unsigned short oa; /* 0xA8 */ + unsigned short res17; + unsigned short sa; /* 0xAC */ + unsigned short res18; + unsigned short psc; /* 0xB0 */ + unsigned short res19; + unsigned short scll; /* 0xB4 */ + unsigned short res20; + unsigned short sclh; /* 0xB8 */ + unsigned short res21; + unsigned short systest; /* 0xBC */ + unsigned short res22; + unsigned short bufstat; /* 0xC0 */ + unsigned short res23; +}; + +#endif /* _OMAP4_I2C_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h new file mode 100644 index 0000000..e5d8b53 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h @@ -0,0 +1,171 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_HOST_DEF_H +#define MMC_HOST_DEF_H + +/* + * OMAP HSMMC register definitions + */ + +#define OMAP_HSMMC1_BASE 0x4809C100 +#define OMAP_HSMMC2_BASE 0x480B4100 +#define OMAP_HSMMC3_BASE 0x480AD100 + +typedef struct hsmmc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned int sysstatus; /* 0x14 */ + unsigned char res2[0x14]; + unsigned int con; /* 0x2C */ + unsigned char res3[0xD4]; + unsigned int blk; /* 0x104 */ + unsigned int arg; /* 0x108 */ + unsigned int cmd; /* 0x10C */ + unsigned int rsp10; /* 0x110 */ + unsigned int rsp32; /* 0x114 */ + unsigned int rsp54; /* 0x118 */ + unsigned int rsp76; /* 0x11C */ + unsigned int data; /* 0x120 */ + unsigned int pstate; /* 0x124 */ + unsigned int hctl; /* 0x128 */ + unsigned int sysctl; /* 0x12C */ + unsigned int stat; /* 0x130 */ + unsigned int ie; /* 0x134 */ + unsigned char res4[0x8]; + unsigned int capa; /* 0x140 */ +} hsmmc_t; + +/* + * OMAP HS MMC Bit definitions + */ +#define MMC_SOFTRESET (0x1 << 1) +#define RESETDONE (0x1 << 0) +#define NOOPENDRAIN (0x0 << 0) +#define OPENDRAIN (0x1 << 0) +#define OD (0x1 << 0) +#define INIT_NOINIT (0x0 << 1) +#define INIT_INITSTREAM (0x1 << 1) +#define HR_NOHOSTRESP (0x0 << 2) +#define STR_BLOCK (0x0 << 3) +#define MODE_FUNC (0x0 << 4) +#define DW8_1_4BITMODE (0x0 << 5) +#define MIT_CTO (0x0 << 6) +#define CDP_ACTIVEHIGH (0x0 << 7) +#define WPP_ACTIVEHIGH (0x0 << 8) +#define RESERVED_MASK (0x3 << 9) +#define CTPL_MMC_SD (0x0 << 11) +#define BLEN_512BYTESLEN (0x200 << 0) +#define NBLK_STPCNT (0x0 << 16) +#define DE_DISABLE (0x0 << 0) +#define BCE_DISABLE (0x0 << 1) +#define ACEN_DISABLE (0x0 << 2) +#define DDIR_OFFSET (4) +#define DDIR_MASK (0x1 << 4) +#define DDIR_WRITE (0x0 << 4) +#define DDIR_READ (0x1 << 4) +#define MSBS_SGLEBLK (0x0 << 5) +#define RSP_TYPE_OFFSET (16) +#define RSP_TYPE_MASK (0x3 << 16) +#define RSP_TYPE_NORSP (0x0 << 16) +#define RSP_TYPE_LGHT136 (0x1 << 16) +#define RSP_TYPE_LGHT48 (0x2 << 16) +#define RSP_TYPE_LGHT48B (0x3 << 16) +#define CCCE_NOCHECK (0x0 << 19) +#define CCCE_CHECK (0x1 << 19) +#define CICE_NOCHECK (0x0 << 20) +#define CICE_CHECK (0x1 << 20) +#define DP_OFFSET (21) +#define DP_MASK (0x1 << 21) +#define DP_NO_DATA (0x0 << 21) +#define DP_DATA (0x1 << 21) +#define CMD_TYPE_NORMAL (0x0 << 22) +#define INDEX_OFFSET (24) +#define INDEX_MASK (0x3f << 24) +#define INDEX(i) (i << 24) +#define DATI_MASK (0x1 << 1) +#define DATI_CMDDIS (0x1 << 1) +#define DTW_1_BITMODE (0x0 << 1) +#define DTW_4_BITMODE (0x1 << 1) +#define SDBP_PWROFF (0x0 << 8) +#define SDBP_PWRON (0x1 << 8) +#define SDVS_1V8 (0x5 << 9) +#define SDVS_3V0 (0x6 << 9) +#define ICE_MASK (0x1 << 0) +#define ICE_STOP (0x0 << 0) +#define ICS_MASK (0x1 << 1) +#define ICS_NOTREADY (0x0 << 1) +#define ICE_OSCILLATE (0x1 << 0) +#define CEN_MASK (0x1 << 2) +#define CEN_DISABLE (0x0 << 2) +#define CEN_ENABLE (0x1 << 2) +#define CLKD_OFFSET (6) +#define CLKD_MASK (0x3FF << 6) +#define DTO_MASK (0xF << 16) +#define DTO_15THDTO (0xE << 16) +#define SOFTRESETALL (0x1 << 24) +#define CC_MASK (0x1 << 0) +#define TC_MASK (0x1 << 1) +#define BWR_MASK (0x1 << 4) +#define BRR_MASK (0x1 << 5) +#define ERRI_MASK (0x1 << 15) +#define IE_CC (0x01 << 0) +#define IE_TC (0x01 << 1) +#define IE_BWR (0x01 << 4) +#define IE_BRR (0x01 << 5) +#define IE_CTO (0x01 << 16) +#define IE_CCRC (0x01 << 17) +#define IE_CEB (0x01 << 18) +#define IE_CIE (0x01 << 19) +#define IE_DTO (0x01 << 20) +#define IE_DCRC (0x01 << 21) +#define IE_DEB (0x01 << 22) +#define IE_CERR (0x01 << 28) +#define IE_BADA (0x01 << 29) + +#define VS30_3V0SUP (1 << 25) +#define VS18_1V8SUP (1 << 26) + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 +#define MMC_CARD 0 +#define SD_CARD 1 +#define BYTE_MODE 0 +#define SECTOR_MODE 1 +#define CLK_INITSEQ 0 +#define CLK_400KHZ 1 +#define CLK_MISC 2 + +typedef struct { + unsigned int card_type; + unsigned int version; + unsigned int mode; + unsigned int size; + unsigned int RCA; +} mmc_card_data; + +#define mmc_reg_out(addr, mask, val)\ + writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) + +#endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h new file mode 100644 index 0000000..5243ea8 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/omap4.h @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Authors: + * Aneesh V <aneesh@ti.com> + * + * Derived from OMAP3 work by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP4_H_ +#define _OMAP4_H_ + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP44XX_L4_CORE_BASE 0x4A000000 +#define OMAP44XX_L4_WKUP_BASE 0x4A300000 +#define OMAP44XX_L4_PER_BASE 0x48000000 + +/* CONTROL */ +#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) + +/* UART */ +#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) +#define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000) +#define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000) + +/* General Purpose Timers */ +#define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000) +#define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000) +#define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000) + +/* Watchdog Timer2 - MPU watchdog */ +#define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000) + +/* GPMC */ +#define OMAP44XX_GPMC_BASE 0x50000000 + +/* + * Hardware Register Details + */ + +/* Watchdog Timer */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* GP Timer */ +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* + * PRCM + */ + +/* PRM */ +#define PRM_BASE 0x4A306000 +#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00) + +#define PRM_RSTCTRL PRM_DEVICE_BASE + +#ifndef __ASSEMBLY__ + +struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; /* 0x10 */ +}; + +#endif /* __ASSEMBLY__ */ + +/* + * Non-secure SRAM Addresses + * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE + * at 0x40304000(EMU base) so that our code works for both EMU and GP + */ +#define NON_SECURE_SRAM_START 0x40304000 +#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_ROM_VECT_BASE 0x4030D000 +/* Temporary SRAM stack used while low level init is done */ +#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END + +/* + * OMAP4 real hardware: + * TODO: Change this to the IDCODE in the hw regsiter + */ +#define CPU_OMAP4430_ES10 1 +#define CPU_OMAP4430_ES20 2 + +#endif diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h new file mode 100644 index 0000000..c6fab00 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#include <asm/arch/omap4.h> +#include <asm/io.h> + +struct omap_sysinfo { + char *board_string; +}; + +void gpmc_init(void); +void watchdog_init(void); +u32 get_device_type(void); +void invalidate_dcache(u32); + +extern const struct omap_sysinfo sysinfo; + +#endif diff --git a/arch/arm/include/asm/arch-orion5x/orion5x.h b/arch/arm/include/asm/arch-orion5x/orion5x.h index 4008c84..d257b66 100644 --- a/arch/arm/include/asm/arch-orion5x/orion5x.h +++ b/arch/arm/include/asm/arch-orion5x/orion5x.h @@ -56,6 +56,10 @@ #define ORION5X_USB20_PORT1_BASE (ORION5X_REGISTER(0xA0000)) #define ORION5X_EGIGA_BASE (ORION5X_REGISTER(0x72000)) +/* Orion5x GbE controller has a single port */ +#define MAX_MVGBE_DEVS 1 +#define MVGBE0_BASE ORION5X_EGIGA_BASE + #define CONFIG_MAX_RAM_BANK_SIZE (64*1024*1024) /* include here SoC variants. 5181, 5281, 6183 should go here when diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h new file mode 100644 index 0000000..035a57e --- /dev/null +++ b/arch/arm/include/asm/arch-pxa/macro.h @@ -0,0 +1,324 @@ +/* + * arch/arm/include/asm/arch-pxa/macro.h + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_PXA_MACRO_H__ +#define __ASM_ARCH_PXA_MACRO_H__ +#ifdef __ASSEMBLY__ + +#include <asm/macro.h> +#include <asm/arch/pxa-regs.h> + +/* + * This macro performs a 32bit write to a memory location and makes sure the + * write operation really happened by performing a read back. + * + * Clobbered regs: r4, r5 + */ +.macro write32rb addr, data + ldr r4, =\addr + ldr r5, =\data + str r5, [r4] + ldr r5, [r4] +.endm + +/* + * This macro waits according to OSCR incrementation + * + * Clobbered regs: r4, r5, r6 + */ +.macro pxa_wait_ticks ticks + ldr r4, =OSCR + mov r5, #0 + str r5, [r4] + ldr r5, =\ticks +1: + ldr r6, [r4] + cmp r5, r6 + bgt 1b +.endm + +/* + * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU + * + * Clobbered regs: r4, r5 + */ +.macro pxa_gpio_setup + write32 GPSR0, CONFIG_SYS_GPSR0_VAL + write32 GPSR1, CONFIG_SYS_GPSR1_VAL + write32 GPSR2, CONFIG_SYS_GPSR2_VAL +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + write32 GPSR3, CONFIG_SYS_GPSR3_VAL +#endif + + write32 GPCR0, CONFIG_SYS_GPCR0_VAL + write32 GPCR1, CONFIG_SYS_GPCR1_VAL + write32 GPCR2, CONFIG_SYS_GPCR2_VAL +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + write32 GPCR3, CONFIG_SYS_GPCR3_VAL +#endif + + write32 GPDR0, CONFIG_SYS_GPDR0_VAL + write32 GPDR1, CONFIG_SYS_GPDR1_VAL + write32 GPDR2, CONFIG_SYS_GPDR2_VAL +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + write32 GPDR3, CONFIG_SYS_GPDR3_VAL +#endif + + write32 GAFR0_L, CONFIG_SYS_GAFR0_L_VAL + write32 GAFR0_U, CONFIG_SYS_GAFR0_U_VAL + write32 GAFR1_L, CONFIG_SYS_GAFR1_L_VAL + write32 GAFR1_U, CONFIG_SYS_GAFR1_U_VAL + write32 GAFR2_L, CONFIG_SYS_GAFR2_L_VAL + write32 GAFR2_U, CONFIG_SYS_GAFR2_U_VAL +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + write32 GAFR3_L, CONFIG_SYS_GAFR3_L_VAL + write32 GAFR3_U, CONFIG_SYS_GAFR3_U_VAL +#endif + + write32 PSSR, CONFIG_SYS_PSSR_VAL +.endm + +/* + * This macro sets up the Memory controller of the PXA2xx CPU + * + * Clobbered regs: r3, r4, r5 + */ +.macro pxa_mem_setup + /* This comes handy when setting MDREFR */ + ldr r3, =MEMC_BASE + + /* + * 1) Initialize Asynchronous static memory controller + */ + + /* MSC0: nCS(0,1) */ + write32rb (MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL + /* MSC1: nCS(2,3) */ + write32rb (MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL + /* MSC2: nCS(4,5) */ + write32rb (MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL + + /* + * 2) Initialize Card Interface + */ + + /* MECR: Memory Expansion Card Register */ + write32rb (MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL + /* MCMEM0: Card Interface slot 0 timing */ + write32rb (MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL + /* MCMEM1: Card Interface slot 1 timing */ + write32rb (MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + write32rb (MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + write32rb (MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + write32rb (MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + write32rb (MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL + + /* + * 3) Configure Fly-By DMA register + */ + + write32rb (MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL + + /* + * 4) Initialize Timing for Sync Memory (SDCLK0) + */ + + /* + * Before accessing MDREFR we need a valid DRI field, so we set + * this to power on defaults + DRI field. + */ + ldr r5, [r3, #MDREFR_OFFSET] + bic r5, r5, #0x0ff + bic r5, r5, #0xf00 /* MDREFR user config with zeroed DRI */ + + ldr r4, =CONFIG_SYS_MDREFR_VAL + mov r6, r4 + lsl r4, #20 + lsr r4, #20 /* Get a valid DRI field */ + + orr r5, r5, r4 /* MDREFR user config with correct DRI */ + + orr r5, #MDREFR_K0RUN + orr r5, #MDREFR_SLFRSH + bic r5, #MDREFR_APD + bic r5, #MDREFR_E1PIN + + str r5, [r3, #MDREFR_OFFSET] + ldr r4, [r3, #MDREFR_OFFSET] + + /* + * 5) Initialize Synchronous Static Memory (Flash/Peripherals) + */ + + /* Initialize SXCNFG register. Assert the enable bits. + * + * Write SXMRS to cause an MRS command to all enabled banks of + * synchronous static memory. Note that SXLCR need not be written + * at this time. + */ + write32rb (MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL + + /* + * 6) Initialize SDRAM + */ + + bic r6, #MDREFR_SLFRSH + str r6, [r3, #MDREFR_OFFSET] + ldr r4, [r3, #MDREFR_OFFSET] + + orr r6, #MDREFR_E1PIN + str r6, [r3, #MDREFR_OFFSET] + ldr r4, [r3, #MDREFR_OFFSET] + + /* + * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure + * but not enable each SDRAM partition pair. + */ + + /* Fetch platform value of MDCNFG */ + ldr r4, =CONFIG_SYS_MDCNFG_VAL + /* Disable all sdram banks */ + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) + /* Write initial value of MDCNFG, w/o enabling sdram banks */ + str r4, [r3, #MDCNFG_OFFSET] + ldr r4, [r3, #MDCNFG_OFFSET] + + /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ + pxa_wait_ticks 0x300 + + /* + * 8) Trigger a number (usually 8) refresh cycles by attempting + * non-burst read or write accesses to disabled SDRAM, as commonly + * specified in the power up sequence documented in SDRAM data + * sheets. The address(es) used for this purpose must not be + * cacheable. + */ + + ldr r4, =CONFIG_SYS_DRAM_BASE +.rept 9 + str r5, [r4] +.endr + + /* + * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). + */ + + ldr r5, =CONFIG_SYS_MDCNFG_VAL + ldr r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3) + and r5, r5, r4 + ldr r4, [r3, #MDCNFG_OFFSET] + orr r4, r4, r5 + str r4, [r3, #MDCNFG_OFFSET] + ldr r4, [r3, #MDCNFG_OFFSET] + + /* + * 10) Write MDMRS. + */ + + ldr r4, =CONFIG_SYS_MDMRS_VAL + str r4, [r3, #MDMRS_OFFSET] + ldr r4, [r3, #MDMRS_OFFSET] + + /* + * 11) Enable APD + */ + + ldr r4, [r3, #MDREFR_OFFSET] + and r6, r6, #MDREFR_APD + orr r4, r4, r6 + str r4, [r3, #MDREFR_OFFSET] + ldr r4, [r3, #MDREFR_OFFSET] +.endm + +/* + * This macro tests if the CPU woke up from sleep and eventually resumes + * + * Clobbered regs: r4, r5 + */ +.macro pxa_wakeup + ldr r4, =RCSR + ldr r5, [r4] + and r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) + str r5, [r4] + teq r5, #RCSR_SMR + + bne pxa_wakeup_exit + + ldr r4, =PSSR + mov r5, #PSSR_PH + str r5, [r4] + + ldr r4, =PSPR + ldr pc, [r4] +pxa_wakeup_exit: +.endm + +/* + * This macro disables all interupts on PXA2xx/PXA3xx CPU + * + * Clobbered regs: r4, r5 + */ +.macro pxa_intr_setup + write32 ICLR, 0 + write32 ICMR, 0 +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + write32 ICLR2, 0 + write32 ICMR2, 0 +#endif +.endm + +/* + * This macro configures clock on PXA2xx/PXA3xx CPU + * + * Clobbered regs: r4, r5 + */ +.macro pxa_clock_setup + /* Disable the peripheral clocks, and set the core clock frequency */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + write32 CKEN, CONFIG_SYS_CKEN + + /* Write CCCR */ + write32 CCCR, CONFIG_SYS_CCCR + +#ifdef CONFIG_RTC + /* enable the 32Khz oscillator for RTC and PowerManager */ + write32 OSCC, #OSCC_OON + ldr r4, =OSCC + + /* Spin here until OSCC.OOK get set, meaning the PLL has settled. */ +2: + ldr r5, [r4] + ands r5, r5, #1 + beq 2b +#endif +.endm + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_PXA_MACRO_H__ */ diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h index cd7b7f9..d442fb0 100644 --- a/arch/arm/include/asm/arch-pxa/pxa-regs.h +++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h @@ -1132,10 +1132,18 @@ typedef void (*ExcpHndlr) (void) ; #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ -#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ +#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1 Control Register */ #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ +#define PWM_CTRL2 __REG(0x40B00010) /* PWM 2 Control Register */ +#define PWM_PWDUTY2 __REG(0x40B00014) /* PWM 2 Duty Cycle Register */ +#define PWM_PERVAL2 __REG(0x40B00018) /* PWM 2 Period Control Register */ + +#define PWM_CTRL3 __REG(0x40C00010) /* PWM 3 Control Register */ +#define PWM_PWDUTY3 __REG(0x40C00014) /* PWM 3 Duty Cycle Register */ +#define PWM_PERVAL3 __REG(0x40C00018) /* PWM 3 Period Control Register */ + /* * Interrupt Controller */ diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index 211b8d5..b7f991d 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -17,7 +17,10 @@ EXTRA := CEXTRA := initcode.o SEXTRA := start.o SOBJS := interrupt.o cache.o +COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o +COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-y += cpu.o +COBJS-y += gpio.o COBJS-y += interrupts.o COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o COBJS-y += os_log.o diff --git a/arch/blackfin/cpu/bootcount.c b/arch/blackfin/cpu/bootcount.c new file mode 100644 index 0000000..6cf6dd5 --- /dev/null +++ b/arch/blackfin/cpu/bootcount.c @@ -0,0 +1,34 @@ +/* + * functions for handling bootcount support + * + * Copyright (c) 2010 Analog Devices Inc. + * + * Licensed under the 2-clause BSD. + */ + +/* This version uses one 32bit storage and combines the magic/count */ + +#include <common.h> + +/* We abuse the EVT0 MMR for bootcount storage by default */ +#ifndef CONFIG_SYS_BOOTCOUNT_ADDR +# define CONFIG_SYS_BOOTCOUNT_ADDR EVT0 +#endif + +#define MAGIC_MASK 0xffff0000 +#define COUNT_MASK 0x0000ffff + +void bootcount_store(ulong cnt) +{ + ulong magic = (BOOTCOUNT_MAGIC & MAGIC_MASK) | (cnt & COUNT_MASK); + bfin_write32(CONFIG_SYS_BOOTCOUNT_ADDR, magic); +} + +ulong bootcount_load(void) +{ + ulong magic = bfin_read32(CONFIG_SYS_BOOTCOUNT_ADDR); + if ((magic & MAGIC_MASK) == (BOOTCOUNT_MAGIC & MAGIC_MASK)) + return magic & COUNT_MASK; + else + return 0; +} diff --git a/arch/blackfin/cpu/cmd_gpio.c b/arch/blackfin/cpu/cmd_gpio.c new file mode 100644 index 0000000..9e505b6 --- /dev/null +++ b/arch/blackfin/cpu/cmd_gpio.c @@ -0,0 +1,120 @@ +/* + * Control GPIO pins on the fly + * + * Copyright (c) 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> + +#include <asm/blackfin.h> +#include <asm/gpio.h> + +enum { + GPIO_INPUT, + GPIO_SET, + GPIO_CLEAR, + GPIO_TOGGLE, +}; + +int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc == 2 && !strcmp(argv[1], "status")) { + bfin_gpio_labels(); + return 0; + } + + if (argc != 3) { + show_usage: + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + /* parse the behavior */ + ulong sub_cmd; + switch (argv[1][0]) { + case 'i': sub_cmd = GPIO_INPUT; break; + case 's': sub_cmd = GPIO_SET; break; + case 'c': sub_cmd = GPIO_CLEAR; break; + case 't': sub_cmd = GPIO_TOGGLE; break; + default: goto show_usage; + } + + /* parse the pin with format: [p][port]<#> */ + const char *str_pin = argv[2]; + + /* grab the [p]<port> portion */ + ulong port_base; + if (*str_pin == 'p') ++str_pin; + switch (*str_pin) { +#ifdef GPIO_PA0 + case 'a': port_base = GPIO_PA0; break; +#endif +#ifdef GPIO_PB0 + case 'b': port_base = GPIO_PB0; break; +#endif +#ifdef GPIO_PC0 + case 'c': port_base = GPIO_PC0; break; +#endif +#ifdef GPIO_PD0 + case 'd': port_base = GPIO_PD0; break; +#endif +#ifdef GPIO_PE0 + case 'e': port_base = GPIO_PE0; break; +#endif +#ifdef GPIO_PF0 + case 'f': port_base = GPIO_PF0; break; +#endif +#ifdef GPIO_PG0 + case 'g': port_base = GPIO_PG0; break; +#endif +#ifdef GPIO_PH0 + case 'h': port_base = GPIO_PH0; break; +#endif +#ifdef GPIO_PI0 + case 'i': port_base = GPIO_PI0; break; +#endif +#ifdef GPIO_PJ + case 'j': port_base = GPIO_PJ0; break; +#endif + default: goto show_usage; + } + + /* grab the <#> portion */ + ulong pin = simple_strtoul(str_pin + 1, NULL, 10); + if (pin > 15) + goto show_usage; + + /* grab the pin before we tweak it */ + ulong gpio = port_base + pin; + gpio_request(gpio, "cmd_gpio"); + + /* finally, let's do it: set direction and exec command */ + if (sub_cmd == GPIO_INPUT) { + gpio_direction_input(gpio); + printf("gpio: pin %lu on port %c set to input\n", pin, *str_pin); + return 0; + } + + ulong value; + switch (sub_cmd) { + case GPIO_SET: value = 1; break; + case GPIO_CLEAR: value = 0; break; + case GPIO_TOGGLE: value = !gpio_get_value(gpio); break; + default: goto show_usage; + } + gpio_direction_output(gpio, value); + printf("gpio: pin %lu on port %c (gpio %lu) value is %lu\n", + pin, *str_pin, gpio, value); + + gpio_free(gpio); + + return 0; +} + +U_BOOT_CMD(gpio, 3, 0, do_gpio, + "set/clear/toggle gpio output pins", + "<set|clear|toggle> <port><pin>\n" + " - set/clear/toggle the specified pin (e.g. PF10)"); diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index 2c8fd86..18dbdf7 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -91,7 +91,9 @@ int irq_init(void) #else bfin_write_SIC_IMASK(0); #endif - bfin_write_EVT2(evt_default); /* NMI */ + /* Set up a dummy NMI handler if needed. */ + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS || ANOMALY_05000219) + bfin_write_EVT2(evt_nmi); /* NMI */ bfin_write_EVT5(evt_default); /* hardware error */ bfin_write_EVT6(evt_default); /* core timer */ bfin_write_EVT7(evt_default); diff --git a/arch/blackfin/cpu/cpu.h b/arch/blackfin/cpu/cpu.h index 0a13c28..ba85e0b 100644 --- a/arch/blackfin/cpu/cpu.h +++ b/arch/blackfin/cpu/cpu.h @@ -29,10 +29,12 @@ void board_reset(void) __attribute__((__weak__)); void bfin_reset_or_hang(void) __attribute__((__noreturn__)); +void bfin_dump(struct pt_regs *reg); void bfin_panic(struct pt_regs *reg); void dump(struct pt_regs *regs); asmlinkage void trap(void); +asmlinkage void evt_nmi(void); asmlinkage void evt_default(void); #endif diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c new file mode 100644 index 0000000..488ca11 --- /dev/null +++ b/arch/blackfin/cpu/gpio.c @@ -0,0 +1,854 @@ +/* + * GPIO Abstraction Layer + * + * Copyright 2006-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/portmux.h> + +#if ANOMALY_05000311 || ANOMALY_05000323 +enum { + AWA_data = SYSCR, + AWA_data_clear = SYSCR, + AWA_data_set = SYSCR, + AWA_toggle = SYSCR, + AWA_maska = UART_SCR, + AWA_maska_clear = UART_SCR, + AWA_maska_set = UART_SCR, + AWA_maska_toggle = UART_SCR, + AWA_maskb = UART_GCTL, + AWA_maskb_clear = UART_GCTL, + AWA_maskb_set = UART_GCTL, + AWA_maskb_toggle = UART_GCTL, + AWA_dir = SPORT1_STAT, + AWA_polar = SPORT1_STAT, + AWA_edge = SPORT1_STAT, + AWA_both = SPORT1_STAT, +#if ANOMALY_05000311 + AWA_inen = TIMER_ENABLE, +#elif ANOMALY_05000323 + AWA_inen = DMA1_1_CONFIG, +#endif +}; + /* Anomaly Workaround */ +#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name) +#else +#define AWA_DUMMY_READ(...) do { } while (0) +#endif + +static struct gpio_port_t * const gpio_array[] = { +#if defined(BF533_FAMILY) + (struct gpio_port_t *) FIO_FLAG_D, +#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \ + || defined(BF538_FAMILY) + (struct gpio_port_t *) PORTFIO, +# if !defined(BF538_FAMILY) + (struct gpio_port_t *) PORTGIO, + (struct gpio_port_t *) PORTHIO, +# endif +#elif defined(BF561_FAMILY) + (struct gpio_port_t *) FIO0_FLAG_D, + (struct gpio_port_t *) FIO1_FLAG_D, + (struct gpio_port_t *) FIO2_FLAG_D, +#elif defined(CONFIG_BF54x) + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +#else +# error no gpio arrays defined +#endif +}; + +#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) +static unsigned short * const port_fer[] = { + (unsigned short *) PORTF_FER, + (unsigned short *) PORTG_FER, + (unsigned short *) PORTH_FER, +}; + +# if !defined(BF537_FAMILY) +static unsigned short * const port_mux[] = { + (unsigned short *) PORTF_MUX, + (unsigned short *) PORTG_MUX, + (unsigned short *) PORTH_MUX, +}; + +static const +u8 pmux_offset[][16] = { +# if defined(CONFIG_BF52x) + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ + { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ +# elif defined(CONFIG_BF51x) + { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ + { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ + { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ +# endif +}; +# endif + +#elif defined(BF538_FAMILY) +static unsigned short * const port_fer[] = { + (unsigned short *) PORTCIO_FER, + (unsigned short *) PORTDIO_FER, + (unsigned short *) PORTEIO_FER, +}; +#endif + +#ifdef CONFIG_BFIN_GPIO_TRACK +#define RESOURCE_LABEL_SIZE 16 + +static struct str_ident { + char name[RESOURCE_LABEL_SIZE]; +} str_ident[MAX_RESOURCES]; + +static void gpio_error(unsigned gpio) +{ + printf("bfin-gpio: GPIO %d wasn't requested!\n", gpio); +} + +static void set_label(unsigned short ident, const char *label) +{ + if (label) { + strncpy(str_ident[ident].name, label, + RESOURCE_LABEL_SIZE); + str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; + } +} + +static char *get_label(unsigned short ident) +{ + return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); +} + +static int cmp_label(unsigned short ident, const char *label) +{ + if (label == NULL) + printf("bfin-gpio: please provide none-null label\n"); + + if (label) + return strcmp(str_ident[ident].name, label); + else + return -EINVAL; +} + +#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)] +#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i)) +#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i)) +#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i)) +#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c] +#else +#define is_reserved(m, i, e) (!(e)) +#define reserve(m, i) +#define unreserve(m, i) +#define DECLARE_RESERVED_MAP(m, c) +#define gpio_error(gpio) +#define set_label(...) +#define get_label(...) "" +#define cmp_label(...) 1 +#endif + +DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM); +DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES)); + +inline int check_gpio(unsigned gpio) +{ +#if defined(CONFIG_BF54x) + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 + || gpio == GPIO_PH14 || gpio == GPIO_PH15 + || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) + return -EINVAL; +#endif + if (gpio >= MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} + +static void port_setup(unsigned gpio, unsigned short usage) +{ +#if defined(BF538_FAMILY) + /* + * BF538/9 Port C,D and E are special. + * Inverted PORT_FER polarity on CDE and no PORF_FER on F + * Regular PORT F GPIOs are handled here, CDE are exclusively + * managed by GPIOLIB + */ + + if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES) + return; + + gpio -= MAX_BLACKFIN_GPIOS; + + if (usage == GPIO_USAGE) + *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); + else + *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); + SSYNC(); + return; +#endif + + if (check_gpio(gpio)) + return; + +#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) + if (usage == GPIO_USAGE) + *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); + else + *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); + SSYNC(); +#elif defined(CONFIG_BF54x) + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); + SSYNC(); +#endif +} + +#ifdef BF537_FAMILY +static struct { + unsigned short res; + unsigned short offset; +} port_mux_lut[] = { + {.res = P_PPI0_D13, .offset = 11}, + {.res = P_PPI0_D14, .offset = 11}, + {.res = P_PPI0_D15, .offset = 11}, + {.res = P_SPORT1_TFS, .offset = 11}, + {.res = P_SPORT1_TSCLK, .offset = 11}, + {.res = P_SPORT1_DTPRI, .offset = 11}, + {.res = P_PPI0_D10, .offset = 10}, + {.res = P_PPI0_D11, .offset = 10}, + {.res = P_PPI0_D12, .offset = 10}, + {.res = P_SPORT1_RSCLK, .offset = 10}, + {.res = P_SPORT1_RFS, .offset = 10}, + {.res = P_SPORT1_DRPRI, .offset = 10}, + {.res = P_PPI0_D8, .offset = 9}, + {.res = P_PPI0_D9, .offset = 9}, + {.res = P_SPORT1_DRSEC, .offset = 9}, + {.res = P_SPORT1_DTSEC, .offset = 9}, + {.res = P_TMR2, .offset = 8}, + {.res = P_PPI0_FS3, .offset = 8}, + {.res = P_TMR3, .offset = 7}, + {.res = P_SPI0_SSEL4, .offset = 7}, + {.res = P_TMR4, .offset = 6}, + {.res = P_SPI0_SSEL5, .offset = 6}, + {.res = P_TMR5, .offset = 5}, + {.res = P_SPI0_SSEL6, .offset = 5}, + {.res = P_UART1_RX, .offset = 4}, + {.res = P_UART1_TX, .offset = 4}, + {.res = P_TMR6, .offset = 4}, + {.res = P_TMR7, .offset = 4}, + {.res = P_UART0_RX, .offset = 3}, + {.res = P_UART0_TX, .offset = 3}, + {.res = P_DMAR0, .offset = 3}, + {.res = P_DMAR1, .offset = 3}, + {.res = P_SPORT0_DTSEC, .offset = 1}, + {.res = P_SPORT0_DRSEC, .offset = 1}, + {.res = P_CAN0_RX, .offset = 1}, + {.res = P_CAN0_TX, .offset = 1}, + {.res = P_SPI0_SSEL7, .offset = 1}, + {.res = P_SPORT0_TFS, .offset = 0}, + {.res = P_SPORT0_DTPRI, .offset = 0}, + {.res = P_SPI0_SSEL2, .offset = 0}, + {.res = P_SPI0_SSEL3, .offset = 0}, +}; + +static void portmux_setup(unsigned short per) +{ + u16 y, offset, muxreg; + u16 function = P_FUNCT2MUX(per); + + for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { + if (port_mux_lut[y].res == per) { + + /* SET PORTMUX REG */ + + offset = port_mux_lut[y].offset; + muxreg = bfin_read_PORT_MUX(); + + if (offset != 1) + muxreg &= ~(1 << offset); + else + muxreg &= ~(3 << 1); + + muxreg |= (function << offset); + bfin_write_PORT_MUX(muxreg); + } + } +} +#elif defined(CONFIG_BF54x) +inline void portmux_setup(unsigned short per) +{ + u32 pmux; + u16 ident = P_IDENT(per); + u16 function = P_FUNCT2MUX(per); + + pmux = gpio_array[gpio_bank(ident)]->port_mux; + + pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); + + gpio_array[gpio_bank(ident)]->port_mux = pmux; +} + +inline u16 get_portmux(unsigned short per) +{ + u32 pmux; + u16 ident = P_IDENT(per); + + pmux = gpio_array[gpio_bank(ident)]->port_mux; + + return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); +} +#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +inline void portmux_setup(unsigned short per) +{ + u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); + u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; + + pmux = *port_mux[gpio_bank(ident)]; + pmux &= ~(3 << offset); + pmux |= (function & 3) << offset; + *port_mux[gpio_bank(ident)] = pmux; + SSYNC(); +} +#else +# define portmux_setup(...) do { } while (0) +#endif + +#ifndef CONFIG_BF54x +/*********************************************************** +* +* FUNCTIONS: Blackfin General Purpose Ports Access Functions +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: These functions abstract direct register access +* to Blackfin processor General Purpose +* Ports Regsiters +* +* CAUTION: These functions do not belong to the GPIO Driver API +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +/* Set a specific bit */ + +#define SET_GPIO(name) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ +{ \ + unsigned long flags; \ + local_irq_save(flags); \ + if (arg) \ + gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ + else \ + gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ +} + +SET_GPIO(dir) /* set_gpio_dir() */ +SET_GPIO(inen) /* set_gpio_inen() */ +SET_GPIO(polar) /* set_gpio_polar() */ +SET_GPIO(edge) /* set_gpio_edge() */ +SET_GPIO(both) /* set_gpio_both() */ + + +#define SET_GPIO_SC(name) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ +{ \ + unsigned long flags; \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save(flags); \ + if (arg) \ + gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + else \ + gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + } \ +} + +SET_GPIO_SC(maska) +SET_GPIO_SC(maskb) +SET_GPIO_SC(data) + +void set_gpio_toggle(unsigned gpio) +{ + unsigned long flags; + if (ANOMALY_05000311 || ANOMALY_05000323) + local_irq_save(flags); + gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + if (ANOMALY_05000311 || ANOMALY_05000323) { + AWA_DUMMY_READ(toggle); + local_irq_restore(flags); + } +} + +/* Set current PORT date (16-bit word) */ + +#define SET_GPIO_P(name) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ +{ \ + unsigned long flags; \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save(flags); \ + gpio_array[gpio_bank(gpio)]->name = arg; \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + } \ +} + +SET_GPIO_P(data) +SET_GPIO_P(dir) +SET_GPIO_P(inen) +SET_GPIO_P(polar) +SET_GPIO_P(edge) +SET_GPIO_P(both) +SET_GPIO_P(maska) +SET_GPIO_P(maskb) + +/* Get a specific bit */ +#define GET_GPIO(name) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ +{ \ + unsigned long flags; \ + unsigned short ret; \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save(flags); \ + ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + } \ + return ret; \ +} + +GET_GPIO(data) +GET_GPIO(dir) +GET_GPIO(inen) +GET_GPIO(polar) +GET_GPIO(edge) +GET_GPIO(both) +GET_GPIO(maska) +GET_GPIO(maskb) + +/* Get current PORT date (16-bit word) */ + +#define GET_GPIO_P(name) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ +{ \ + unsigned long flags; \ + unsigned short ret; \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save(flags); \ + ret = (gpio_array[gpio_bank(gpio)]->name); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore(flags); \ + } \ + return ret; \ +} + +GET_GPIO_P(data) +GET_GPIO_P(dir) +GET_GPIO_P(inen) +GET_GPIO_P(polar) +GET_GPIO_P(edge) +GET_GPIO_P(both) +GET_GPIO_P(maska) +GET_GPIO_P(maskb) + +#else /* CONFIG_BF54x */ + +unsigned short get_gpio_dir(unsigned gpio) +{ + return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); +} + +#endif /* CONFIG_BF54x */ + +/*********************************************************** +* +* FUNCTIONS: Blackfin Peripheral Resource Allocation +* and PortMux Setup +* +* INPUTS/OUTPUTS: +* per Peripheral Identifier +* label String +* +* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int peripheral_request(unsigned short per, const char *label) +{ + unsigned short ident = P_IDENT(per); + + /* + * Don't cares are pins with only one dedicated function + */ + + if (per & P_DONTCARE) + return 0; + + if (!(per & P_DEFINED)) + return -ENODEV; + + BUG_ON(ident >= MAX_RESOURCES); + + /* If a pin can be muxed as either GPIO or peripheral, make + * sure it is not already a GPIO pin when we request it. + */ + if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) { + printf("%s: Peripheral %d is already reserved as GPIO by %s !\n", + __func__, ident, get_label(ident)); + return -EBUSY; + } + + if (unlikely(is_reserved(peri, ident, 1))) { + + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ + +#ifdef CONFIG_BF54x + if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { +#else + if (!(per & P_MAYSHARE)) { +#endif + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ + + if (cmp_label(ident, label) == 0) + goto anyway; + + printf("%s: Peripheral %d function %d is already reserved by %s !\n", + __func__, ident, P_FUNCT2MUX(per), get_label(ident)); + return -EBUSY; + } + } + + anyway: + reserve(peri, ident); + + portmux_setup(per); + port_setup(ident, PERIPHERAL_USAGE); + + set_label(ident, label); + + return 0; +} + +int peripheral_request_list(const unsigned short per[], const char *label) +{ + u16 cnt; + int ret; + + for (cnt = 0; per[cnt] != 0; cnt++) { + + ret = peripheral_request(per[cnt], label); + + if (ret < 0) { + for ( ; cnt > 0; cnt--) + peripheral_free(per[cnt - 1]); + + return ret; + } + } + + return 0; +} + +void peripheral_free(unsigned short per) +{ + unsigned short ident = P_IDENT(per); + + if (per & P_DONTCARE) + return; + + if (!(per & P_DEFINED)) + return; + + if (unlikely(!is_reserved(peri, ident, 0))) + return; + + if (!(per & P_MAYSHARE)) + port_setup(ident, GPIO_USAGE); + + unreserve(peri, ident); + + set_label(ident, "free"); +} + +void peripheral_free_list(const unsigned short per[]) +{ + u16 cnt; + for (cnt = 0; per[cnt] != 0; cnt++) + peripheral_free(per[cnt]); +} + +/*********************************************************** +* +* FUNCTIONS: Blackfin GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS +* label String +* +* DESCRIPTION: Blackfin GPIO Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int bfin_gpio_request(unsigned gpio, const char *label) +{ + if (check_gpio(gpio) < 0) + return -EINVAL; + + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) + return 0; + + if (unlikely(is_reserved(gpio, gpio, 1))) { + printf("bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); + return -EBUSY; + } + if (unlikely(is_reserved(peri, gpio, 1))) { + printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); + return -EBUSY; + } +#ifndef CONFIG_BF54x + else { /* Reset POLAR setting when acquiring a gpio for the first time */ + set_gpio_polar(gpio, 0); + } +#endif + + reserve(gpio, gpio); + set_label(gpio, label); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +void bfin_gpio_free(unsigned gpio) +{ + if (check_gpio(gpio) < 0) + return; + + if (unlikely(!is_reserved(gpio, gpio, 0))) { + gpio_error(gpio); + return; + } + + unreserve(gpio, gpio); + + set_label(gpio, "free"); +} + +#ifdef BFIN_SPECIAL_GPIO_BANKS +DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); + +int bfin_special_gpio_request(unsigned gpio, const char *label) +{ + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) + return 0; + + if (unlikely(is_reserved(special_gpio, gpio, 1))) { + printf("bfin-gpio: GPIO %d is already reserved by %s !\n", + gpio, get_label(gpio)); + return -EBUSY; + } + if (unlikely(is_reserved(peri, gpio, 1))) { + printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", + gpio, get_label(gpio)); + + return -EBUSY; + } + + reserve(special_gpio, gpio); + reserve(peri, gpio); + + set_label(gpio, label); + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +void bfin_special_gpio_free(unsigned gpio) +{ + if (unlikely(!is_reserved(special_gpio, gpio, 0))) { + gpio_error(gpio); + return; + } + + reserve(special_gpio, gpio); + reserve(peri, gpio); + set_label(gpio, "free"); +} +#endif + +static inline void __bfin_gpio_direction_input(unsigned gpio) +{ +#ifdef CONFIG_BF54x + gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); +#endif + gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +} + +int bfin_gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + + if (!is_reserved(gpio, gpio, 0)) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + __bfin_gpio_direction_input(gpio); + AWA_DUMMY_READ(inen); + local_irq_restore(flags); + + return 0; +} + +void bfin_gpio_toggle_value(unsigned gpio) +{ +#ifdef CONFIG_BF54x + gpio_set_value(gpio, !gpio_get_value(gpio)); +#else + gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); +#endif +} + +void bfin_gpio_set_value(unsigned gpio, int arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); +} + +int bfin_gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + + if (!is_reserved(gpio, gpio, 0)) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + + gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); +#ifdef CONFIG_BF54x + gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); +#endif + + AWA_DUMMY_READ(dir); + local_irq_restore(flags); + + return 0; +} + +int bfin_gpio_get_value(unsigned gpio) +{ +#ifdef CONFIG_BF54x + return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); +#else + unsigned long flags; + + if (unlikely(get_gpio_edge(gpio))) { + int ret; + local_irq_save(flags); + set_gpio_edge(gpio, 0); + ret = get_gpio_data(gpio); + set_gpio_edge(gpio, 1); + local_irq_restore(flags); + return ret; + } else + return get_gpio_data(gpio); +#endif +} + +/* If we are booting from SPI and our board lacks a strong enough pull up, + * the core can reset and execute the bootrom faster than the resistor can + * pull the signal logically high. To work around this (common) error in + * board design, we explicitly set the pin back to GPIO mode, force /CS + * high, and wait for the electrons to do their thing. + * + * This function only makes sense to be called from reset code, but it + * lives here as we need to force all the GPIO states w/out going through + * BUG() checks and such. + */ +void bfin_reset_boot_spi_cs(unsigned short pin) +{ + unsigned short gpio = P_IDENT(pin); + port_setup(gpio, GPIO_USAGE); + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + AWA_DUMMY_READ(data_set); + udelay(1); +} + +#ifdef CONFIG_BFIN_GPIO_TRACK +void bfin_gpio_labels(void) +{ + int c, gpio; + + for (c = 0; c < MAX_RESOURCES; c++) { + gpio = is_reserved(gpio, c, 1); + if (!check_gpio(c) && gpio) + printf("GPIO_%d:\t%s\tGPIO %s\n", c, + get_label(c), + get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + else if (is_reserved(peri, c, 1)) + printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c)); + else + continue; + } +} +#endif diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 5f80ad6..007f5ce 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -101,6 +101,28 @@ static inline void serial_putc(char c) continue; } +__attribute__((always_inline)) static inline void +program_nmi_handler(void) +{ + u32 tmp1, tmp2; + + /* Older bootroms don't create a dummy NMI handler, + * so make one ourselves ASAP in case it fires. + */ + if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS && !ANOMALY_05000219) + return; + + asm volatile ( + "%0 = RETS;" /* Save current RETS */ + "CALL 1f;" /* Figure out current PC */ + "RTN;" /* The simple NMI handler */ + "1:" + "%1 = RETS;" /* Load addr of NMI handler */ + "RETS = %0;" /* Restore RETS */ + "[%2] = %1;" /* Write NMI handler */ + : "=r"(tmp1), "=r"(tmp2) : "ab"(EVT2) + ); +} /* Max SCLK can be 133MHz ... dividing that by (2*4) gives * us a freq of 16MHz for SPI which should generally be @@ -640,6 +662,9 @@ void initcode(ADI_BOOT_DATA *bs) { ADI_BOOT_DATA bootstruct_scratch; + /* Setup NMI handler before anything else */ + program_nmi_handler(); + serial_init(); serial_putc('A'); @@ -675,7 +700,12 @@ void initcode(ADI_BOOT_DATA *bs) #ifdef CONFIG_BFIN_BOOTROM_USES_EVT1 serial_putc('I'); - /* tell the bootrom where our entry point is */ + /* Tell the bootrom where our entry point is so that it knows + * where to jump to when finishing processing the LDR. This + * allows us to avoid small jump blocks in the LDR, and also + * works around anomaly 05000389 (init address in external + * memory causes bootrom to trigger external addressing IVHW). + */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); #endif diff --git a/arch/blackfin/cpu/interrupt.S b/arch/blackfin/cpu/interrupt.S index 69bba3f..0e5e59e 100644 --- a/arch/blackfin/cpu/interrupt.S +++ b/arch/blackfin/cpu/interrupt.S @@ -150,3 +150,8 @@ ENTRY(_evt_default) RESTORE_ALL_SYS rti; ENDPROC(_evt_default) + +/* NMI handler */ +ENTRY(_evt_nmi) + rtn; +ENDPROC(_evt_nmi) diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h index 5f9be86..f9e311f 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/cpu/serial.h @@ -26,6 +26,8 @@ #ifndef __ASSEMBLY__ +#include <asm/portmux.h> + #define LOB(x) ((x) & 0xFF) #define HIB(x) (((x) >> 8) & 0xFF) @@ -103,6 +105,23 @@ struct bfin_mmr_serial { __attribute__((always_inline)) static inline void serial_do_portmux(void) { + if (!BFIN_DEBUG_EARLY_SERIAL) { + const unsigned short pins[] = { +#if CONFIG_UART_CONSOLE == 0 + P_UART0_TX, P_UART0_RX, +#elif CONFIG_UART_CONSOLE == 1 + P_UART1_TX, P_UART1_RX, +#elif CONFIG_UART_CONSOLE == 2 + P_UART2_TX, P_UART2_RX, +#elif CONFIG_UART_CONSOLE == 3 + P_UART3_TX, P_UART3_RX, +#endif + 0, + }; + peripheral_request_list(pins, "bfin-uart"); + return; + } + #if defined(__ADSPBF51x__) # define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c index caaea94..09388aa 100644 --- a/arch/blackfin/cpu/traps.c +++ b/arch/blackfin/cpu/traps.c @@ -29,14 +29,26 @@ #include <asm/deferred.h> #include "cpu.h" +#ifdef CONFIG_DEBUG_DUMP +# define ENABLE_DUMP 1 +#else +# define ENABLE_DUMP 0 +#endif + #define trace_buffer_save(x) \ do { \ + if (!ENABLE_DUMP) \ + break; \ (x) = bfin_read_TBUFCTL(); \ bfin_write_TBUFCTL((x) & ~TBUFEN); \ } while (0) #define trace_buffer_restore(x) \ - bfin_write_TBUFCTL((x)) + do { \ + if (!ENABLE_DUMP) \ + break; \ + bfin_write_TBUFCTL((x)); \ + } while (0); /* The purpose of this map is to provide a mapping of address<->cplb settings * rather than an exact map of what is actually addressable on the part. This @@ -82,8 +94,16 @@ int trap_c(struct pt_regs *regs, uint32_t level) { uint32_t ret = 0; uint32_t trapnr = (regs->seqstat & EXCAUSE); + unsigned long tflags; bool data = false; + /* + * Keep the trace buffer so that a miss here points people + * to the right place (their code). Crashes here rarely + * happen. If they do, only the Blackfin maintainer cares. + */ + trace_buffer_save(tflags); + switch (trapnr) { /* 0x26 - Data CPLB Miss */ case VEC_CPLB_M: @@ -97,7 +117,7 @@ int trap_c(struct pt_regs *regs, uint32_t level) */ if (last_cplb_fault_retx != regs->retx) { last_cplb_fault_retx = regs->retx; - return ret; + break; } } @@ -110,7 +130,6 @@ int trap_c(struct pt_regs *regs, uint32_t level) uint32_t new_cplb_addr = 0, new_cplb_data = 0; static size_t last_evicted; size_t i; - unsigned long tflags; #ifdef CONFIG_EXCEPTION_DEFER /* This should never happen */ @@ -118,13 +137,6 @@ int trap_c(struct pt_regs *regs, uint32_t level) bfin_panic(regs); #endif - /* - * Keep the trace buffer so that a miss here points people - * to the right place (their code). Crashes here rarely - * happen. If they do, only the Blackfin maintainer cares. - */ - trace_buffer_save(tflags); - new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1); for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) { @@ -180,7 +192,6 @@ int trap_c(struct pt_regs *regs, uint32_t level) for (i = 0; i < 16; ++i) debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++); - trace_buffer_restore(tflags); break; } #ifdef CONFIG_CMD_KGDB @@ -208,23 +219,21 @@ int trap_c(struct pt_regs *regs, uint32_t level) #ifdef CONFIG_CMD_KGDB if (level == 3) { /* We need to handle this at EVT5, so try again */ + bfin_dump(regs); ret = 1; break; } if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return 0; + break; #endif bfin_panic(regs); } + + trace_buffer_restore(tflags); + return ret; } -#ifdef CONFIG_DEBUG_DUMP -# define ENABLE_DUMP 1 -#else -# define ENABLE_DUMP 0 -#endif - #ifndef CONFIG_KALLSYMS const char *symbol_lookup(unsigned long addr, unsigned long *caddr) { @@ -364,17 +373,14 @@ void dump(struct pt_regs *fp) printf("\n"); } -void dump_bfin_trace_buffer(void) +static void _dump_bfin_trace_buffer(void) { char buf[150]; - unsigned long tflags; int i = 0; if (!ENABLE_DUMP) return; - trace_buffer_save(tflags); - printf("Hardware Trace:\n"); if (bfin_read_TBUFSTAT() & TBUFCNT) { @@ -385,16 +391,21 @@ void dump_bfin_trace_buffer(void) printf(" Source : %s\n", buf); } } +} +void dump_bfin_trace_buffer(void) +{ + unsigned long tflags; + trace_buffer_save(tflags); + _dump_bfin_trace_buffer(); trace_buffer_restore(tflags); } -void bfin_panic(struct pt_regs *regs) +void bfin_dump(struct pt_regs *regs) { - if (ENABLE_DUMP) { - unsigned long tflags; - trace_buffer_save(tflags); - } + unsigned long tflags; + + trace_buffer_save(tflags); puts( "\n" @@ -404,7 +415,16 @@ void bfin_panic(struct pt_regs *regs) "\n" ); dump(regs); - dump_bfin_trace_buffer(); + _dump_bfin_trace_buffer(); puts("\n"); + + trace_buffer_restore(tflags); +} + +void bfin_panic(struct pt_regs *regs) +{ + unsigned long tflags; + trace_buffer_save(tflags); + bfin_dump(regs); bfin_reset_or_hang(); } diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index 3fd34b3..48f793a 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -75,7 +75,15 @@ extern void blackfin_dcache_flush_invalidate_range(const void *, const void *); * regions can only be accessed via DMA, so if the address in question is in * that region, make sure we attempt to DMA indirectly. */ -# define addr_bfin_on_chip_mem(addr) (((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000) +# ifdef __ADSPBF561__ + /* Core B regions all need dma from Core A */ +# define addr_bfin_on_chip_mem(addr) \ + ((((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000) || \ + (((unsigned long)(addr) & 0xFFC00000) == 0xFF400000)) +# else +# define addr_bfin_on_chip_mem(addr) \ + (((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000) +# endif # include <asm/system.h> diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h new file mode 100644 index 0000000..b650ef0 --- /dev/null +++ b/arch/blackfin/include/asm/gpio.h @@ -0,0 +1,201 @@ +/* + * Copyright 2006-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ARCH_BLACKFIN_GPIO_H__ +#define __ARCH_BLACKFIN_GPIO_H__ + +#define gpio_bank(x) ((x) >> 4) +#define gpio_bit(x) (1<<((x) & 0xF)) +#define gpio_sub_n(x) ((x) & 0xF) + +#define GPIO_BANKSIZE 16 +#define GPIO_BANK_NUM DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE) + +#define GPIO_0 0 +#define GPIO_1 1 +#define GPIO_2 2 +#define GPIO_3 3 +#define GPIO_4 4 +#define GPIO_5 5 +#define GPIO_6 6 +#define GPIO_7 7 +#define GPIO_8 8 +#define GPIO_9 9 +#define GPIO_10 10 +#define GPIO_11 11 +#define GPIO_12 12 +#define GPIO_13 13 +#define GPIO_14 14 +#define GPIO_15 15 +#define GPIO_16 16 +#define GPIO_17 17 +#define GPIO_18 18 +#define GPIO_19 19 +#define GPIO_20 20 +#define GPIO_21 21 +#define GPIO_22 22 +#define GPIO_23 23 +#define GPIO_24 24 +#define GPIO_25 25 +#define GPIO_26 26 +#define GPIO_27 27 +#define GPIO_28 28 +#define GPIO_29 29 +#define GPIO_30 30 +#define GPIO_31 31 +#define GPIO_32 32 +#define GPIO_33 33 +#define GPIO_34 34 +#define GPIO_35 35 +#define GPIO_36 36 +#define GPIO_37 37 +#define GPIO_38 38 +#define GPIO_39 39 +#define GPIO_40 40 +#define GPIO_41 41 +#define GPIO_42 42 +#define GPIO_43 43 +#define GPIO_44 44 +#define GPIO_45 45 +#define GPIO_46 46 +#define GPIO_47 47 + +#define PERIPHERAL_USAGE 1 +#define GPIO_USAGE 0 + +#ifndef __ASSEMBLY__ + +#ifndef CONFIG_BF54x +void set_gpio_dir(unsigned, unsigned short); +void set_gpio_inen(unsigned, unsigned short); +void set_gpio_polar(unsigned, unsigned short); +void set_gpio_edge(unsigned, unsigned short); +void set_gpio_both(unsigned, unsigned short); +void set_gpio_data(unsigned, unsigned short); +void set_gpio_maska(unsigned, unsigned short); +void set_gpio_maskb(unsigned, unsigned short); +void set_gpio_toggle(unsigned); +void set_gpiop_dir(unsigned, unsigned short); +void set_gpiop_inen(unsigned, unsigned short); +void set_gpiop_polar(unsigned, unsigned short); +void set_gpiop_edge(unsigned, unsigned short); +void set_gpiop_both(unsigned, unsigned short); +void set_gpiop_data(unsigned, unsigned short); +void set_gpiop_maska(unsigned, unsigned short); +void set_gpiop_maskb(unsigned, unsigned short); +unsigned short get_gpio_dir(unsigned); +unsigned short get_gpio_inen(unsigned); +unsigned short get_gpio_polar(unsigned); +unsigned short get_gpio_edge(unsigned); +unsigned short get_gpio_both(unsigned); +unsigned short get_gpio_maska(unsigned); +unsigned short get_gpio_maskb(unsigned); +unsigned short get_gpio_data(unsigned); +unsigned short get_gpiop_dir(unsigned); +unsigned short get_gpiop_inen(unsigned); +unsigned short get_gpiop_polar(unsigned); +unsigned short get_gpiop_edge(unsigned); +unsigned short get_gpiop_both(unsigned); +unsigned short get_gpiop_maska(unsigned); +unsigned short get_gpiop_maskb(unsigned); +unsigned short get_gpiop_data(unsigned); + +struct gpio_port_t { + unsigned short data; + unsigned short dummy1; + unsigned short data_clear; + unsigned short dummy2; + unsigned short data_set; + unsigned short dummy3; + unsigned short toggle; + unsigned short dummy4; + unsigned short maska; + unsigned short dummy5; + unsigned short maska_clear; + unsigned short dummy6; + unsigned short maska_set; + unsigned short dummy7; + unsigned short maska_toggle; + unsigned short dummy8; + unsigned short maskb; + unsigned short dummy9; + unsigned short maskb_clear; + unsigned short dummy10; + unsigned short maskb_set; + unsigned short dummy11; + unsigned short maskb_toggle; + unsigned short dummy12; + unsigned short dir; + unsigned short dummy13; + unsigned short polar; + unsigned short dummy14; + unsigned short edge; + unsigned short dummy15; + unsigned short both; + unsigned short dummy16; + unsigned short inen; +}; +#endif + +#ifdef CONFIG_BFIN_GPIO_TRACK +void bfin_gpio_labels(void); +#else +#define bfin_gpio_labels() +#define bfin_gpio_request(gpio, label) bfin_gpio_request(gpio) +#define bfin_special_gpio_request(gpio, label) bfin_special_gpio_request(gpio) +#endif + +#ifdef BFIN_SPECIAL_GPIO_BANKS +void bfin_special_gpio_free(unsigned gpio); +int bfin_special_gpio_request(unsigned gpio, const char *label); +#endif + +int bfin_gpio_request(unsigned gpio, const char *label); +void bfin_gpio_free(unsigned gpio); +int bfin_gpio_direction_input(unsigned gpio); +int bfin_gpio_direction_output(unsigned gpio, int value); +int bfin_gpio_get_value(unsigned gpio); +void bfin_gpio_set_value(unsigned gpio, int value); +void bfin_gpio_toggle_value(unsigned gpio); + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return bfin_gpio_request(gpio, label); +} + +static inline void gpio_free(unsigned gpio) +{ + return bfin_gpio_free(gpio); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return bfin_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return bfin_gpio_direction_output(gpio, value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return bfin_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + return bfin_gpio_set_value(gpio, value); +} + +static inline int gpio_is_valid(int number) +{ + return number >= 0 && number < MAX_BLACKFIN_GPIOS; +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/anomaly.h b/arch/blackfin/include/asm/mach-bf527/anomaly.h index 0fd7e31..9358afa 100644 --- a/arch/blackfin/include/asm/mach-bf527/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf527/anomaly.h @@ -1,19 +1,28 @@ /* - * File: include/asm-blackfin/mach-bf527/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ +/* We do not support old silicon - sorry */ +#if __SILICON_REVISION__ < 0 +# error will not work on BF526/BF527 silicon version +#endif + #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) # define ANOMALY_BF526 1 #else @@ -25,10 +34,14 @@ # define ANOMALY_BF527 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526) +#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527) +#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527)) + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ +#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ @@ -40,167 +53,226 @@ /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ -#define ANOMALY_05000313 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000328 (_ANOMALY_BF527(< 2)) /* Host DMA Boot Modes Are Not Functional */ #define ANOMALY_05000330 (__SILICON_REVISION__ < 2) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000337 (_ANOMALY_BF527(< 2)) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ -#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000341 (_ANOMALY_BF527(< 2)) /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ -#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000342 (_ANOMALY_BF527(< 2)) /* USB Calibration Value Is Not Initialized */ -#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2)) /* USB Calibration Value to use */ #define ANOMALY_05000346_value 0xE510 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000347 (_ANOMALY_BF527(< 2)) /* Security Features Are Not Functional */ -#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1) +#define ANOMALY_05000348 (_ANOMALY_BF527(< 1)) /* bfrom_SysControl() Firmware Function Performs Improper System Reset */ -#define ANOMALY_05000353 (ANOMALY_BF526) +#define ANOMALY_05000353 (_ANOMALY_BF526(< 1)) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ -#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000355 (_ANOMALY_BF527(< 2)) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ -#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000357 (_ANOMALY_BF527(< 2)) /* Incorrect Revision Number in DSPID Register */ -#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1) +#define ANOMALY_05000364 (_ANOMALY_BF527(== 1)) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) /* Incorrect Default CSEL Value in PLL_DIV */ -#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000368 (_ANOMALY_BF527(< 2)) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ -#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000371 (_ANOMALY_BF527(< 2)) /* Authentication Fails To Initiate */ -#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000376 (_ANOMALY_BF527(< 2)) /* Data Read From L3 Memory by USB DMA May be Corrupted */ -#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000380 (_ANOMALY_BF527(< 2)) /* 8-Bit NAND Flash Boot Mode Not Functional */ -#define ANOMALY_05000382 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Boot from OTP Memory Not Functional */ -#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000385 (_ANOMALY_BF527(< 2)) /* bfrom_SysControl() Firmware Routine Not Functional */ -#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000386 (_ANOMALY_BF527(< 2)) /* Programmable Preboot Settings Not Functional */ -#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000387 (_ANOMALY_BF527(< 2)) /* CRC32 Checksum Support Not Functional */ -#define ANOMALY_05000388 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Reset Vector Must Not Be in SDRAM Memory Space */ -#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000389 (_ANOMALY_BF527(< 2)) /* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000392 (_ANOMALY_BF527(< 2)) /* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000393 (_ANOMALY_BF527(< 2)) /* Log Buffer Not Functional */ -#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000394 (_ANOMALY_BF527(< 2)) /* Hook Routine Not Functional */ -#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000395 (_ANOMALY_BF527(< 2)) /* Header Indirect Bit Not Functional */ -#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000396 (_ANOMALY_BF527(< 2)) /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ -#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000397 (_ANOMALY_BF527(< 2)) /* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */ -#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000398 (_ANOMALY_BF527(< 2)) /* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */ -#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000399 (_ANOMALY_BF527(< 2)) /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ -#define ANOMALY_05000401 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ -#define ANOMALY_05000403 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Lockbox SESR Disallows Certain User Interrupts */ -#define ANOMALY_05000404 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Lockbox SESR Firmware Does Not Save/Restore Full Context */ #define ANOMALY_05000405 (1) /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */ -#define ANOMALY_05000407 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */ #define ANOMALY_05000408 (1) /* Lockbox firmware leaves MDMA0 channel enabled */ -#define ANOMALY_05000409 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Incorrect Default Internal Voltage Regulator Setting */ -#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000410 (_ANOMALY_BF527(< 2)) /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */ -#define ANOMALY_05000411 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2)) /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */ -#define ANOMALY_05000414 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2)) /* DEB2_URGENT Bit Not Functional */ -#define ANOMALY_05000415 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Speculative Fetches Can Cause Undesired External FIFO Operations */ #define ANOMALY_05000416 (1) /* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */ -#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000417 (_ANOMALY_BF527(< 2)) /* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */ -#define ANOMALY_05000418 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2)) /* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */ -#define ANOMALY_05000420 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2)) /* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */ #define ANOMALY_05000421 (1) /* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */ -#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) +#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1)) /* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */ -#define ANOMALY_05000423 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Internal Voltage Regulator Not Trimmed */ -#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2) +#define ANOMALY_05000424 (_ANOMALY_BF527(< 2)) /* Multichannel SPORT Channel Misalignment Under Specific Configuration */ -#define ANOMALY_05000425 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */ -#define ANOMALY_05000429 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2)) /* Software System Reset Corrupts PLL_LOCKCNT Register */ -#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1) +#define ANOMALY_05000430 (_ANOMALY_BF527(> 1)) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (1) /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */ -#define ANOMALY_05000432 (ANOMALY_BF526) +#define ANOMALY_05000432 (_ANOMALY_BF526(< 1)) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ -#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527) +#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* Preboot Cannot be Used to Alter the PLL_DIV Register */ -#define ANOMALY_05000439 (1) +#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */ -#define ANOMALY_05000440 (1) +#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* OTP Write Accesses Not Supported */ -#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) +#define ANOMALY_05000442 (_ANOMALY_BF527(< 1)) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* The WURESET Bit in the SYSCR Register is not Functional */ #define ANOMALY_05000445 (1) +/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000450 (1) /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ #define ANOMALY_05000451 (1) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ -#define ANOMALY_05000452 (1) +#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ #define ANOMALY_05000456 (1) /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ #define ANOMALY_05000457 (1) +/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */ +#define ANOMALY_05000460 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ +#define ANOMALY_05000466 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0)) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ +#define ANOMALY_05000483 (1) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) +#define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000400 (0) +#define ANOMALY_05000402 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000474 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf527/def_local.h b/arch/blackfin/include/asm/mach-bf527/def_local.h index 81eca83..1ffa239 100644 --- a/arch/blackfin/include/asm/mach-bf527/def_local.h +++ b/arch/blackfin/include/asm/mach-bf527/def_local.h @@ -1,2 +1,6 @@ +#include "gpio.h" #include "mem_map.h" +#include "portmux.h" #include "ports.h" + +#define CONFIG_BF52x 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf527/gpio.h b/arch/blackfin/include/asm/mach-bf527/gpio.h new file mode 100644 index 0000000..f80c299 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf527/gpio.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf527/portmux.h b/arch/blackfin/include/asm/mach-bf527/portmux.h new file mode 100644 index 0000000..aa16558 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf527/portmux.h @@ -0,0 +1,220 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) + +#if !defined(CONFIG_BF527_SPORT0_PORTG) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#else +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#if !defined(CONFIG_BF527_SPORT0_TSCLK_PG14) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#else +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#endif +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#endif + +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) + +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) + +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) + +#if !defined(CONFIG_BF527_UART1_PORTG) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) +#else +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#endif + +#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3)) +#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3)) +#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3)) + +#define P_HWAIT (P_DONTCARE) + +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1 +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 + +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +/* #define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */ +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_MDC (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) + +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2)) + +#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) +#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) +#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) + +#if defined(CONFIG_BF527_NAND_D_PORTF) +#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2)) +#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) +#else /*if defined(CONFIG_BF527_NAND_D_PORTH)*/ +#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#endif + +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_NAND_WE (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_NAND_RE (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_NAND_CLE (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0)) +#define P_NAND_ALE (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0)) + +#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2)) +#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2)) +#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2)) +#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2)) +#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) +#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2)) +#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2)) +#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2)) +#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2)) +#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2)) +#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2)) +#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2)) +#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2)) +#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2)) +#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2)) +#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2)) + +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1)) +#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1)) +#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1)) +#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1)) +#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1)) +#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1)) +#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_MDIO (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) + +#define P_TWI0_SCL (P_DONTCARE) +#define P_TWI0_SDA (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DONTCARE) +#define P_PPI0_CLK (P_DONTCARE) + +#define P_MII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_ERxER, \ + P_MII0_CRS, \ + P_MDC, \ + P_MDIO, 0} + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_RMII0_REF_CLK, \ + P_RMII0_MDINT, \ + P_RMII0_CRS_DV, \ + P_MDC, \ + P_MDIO, 0} + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf533/anomaly.h b/arch/blackfin/include/asm/mach-bf533/anomaly.h index c98747f..78f8721 100644 --- a/arch/blackfin/include/asm/mach-bf533/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf533/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf533/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -34,7 +38,7 @@ # define ANOMALY_BF533 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) @@ -46,7 +50,7 @@ #define ANOMALY_05000122 (1) /* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ #define ANOMALY_05000158 (__SILICON_REVISION__ < 5) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) @@ -56,13 +60,13 @@ #define ANOMALY_05000180 (1) /* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ #define ANOMALY_05000183 (__SILICON_REVISION__ < 4) -/* False Protection Exceptions */ +/* False Protection Exceptions when Speculative Fetch Is Cancelled */ #define ANOMALY_05000189 (__SILICON_REVISION__ < 4) /* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ #define ANOMALY_05000193 (__SILICON_REVISION__ < 4) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ #define ANOMALY_05000194 (__SILICON_REVISION__ < 4) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +/* Failing MMR Accesses when Preceding Memory Read Stalls */ #define ANOMALY_05000198 (__SILICON_REVISION__ < 5) /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 4) @@ -74,7 +78,7 @@ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) /* Specific Sequence That Can Cause DMA Error or DMA Stopping */ #define ANOMALY_05000203 (__SILICON_REVISION__ < 4) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */ #define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) /* Recovery from "Brown-Out" Condition */ #define ANOMALY_05000207 (__SILICON_REVISION__ < 4) @@ -106,7 +110,7 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* Data CPLBs Should Prevent Spurious Hardware Errors */ +/* Data CPLBs Should Prevent False Hardware Errors */ #define ANOMALY_05000246 (__SILICON_REVISION__ < 5) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ == 4) @@ -148,21 +152,21 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 6) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 6) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 6) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 6) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 6) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 6) /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ +/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ @@ -170,11 +174,11 @@ #define ANOMALY_05000310 (1) /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ #define ANOMALY_05000311 (__SILICON_REVISION__ < 6) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 6) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (__SILICON_REVISION__ < 6) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 6) /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ #define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6) @@ -200,6 +204,18 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -213,17 +229,17 @@ #define ANOMALY_05000070 (__SILICON_REVISION__ < 2) /* Writing FIO_DIR can corrupt a programmable flag's data */ #define ANOMALY_05000079 (__SILICON_REVISION__ < 2) -/* Timer Auto-Baud Mode requires the UART clock to be enabled */ +/* Timer Auto-Baud Mode requires the UART clock to be enabled. */ #define ANOMALY_05000086 (__SILICON_REVISION__ < 2) /* Internal Clocking Modes on SPORT0 not supported */ #define ANOMALY_05000088 (__SILICON_REVISION__ < 2) /* Internal voltage regulator does not wake up from an RTC wakeup */ #define ANOMALY_05000092 (__SILICON_REVISION__ < 2) -/* The IFLUSH instruction must be preceded by a CSYNC instruction */ +/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */ #define ANOMALY_05000093 (__SILICON_REVISION__ < 2) -/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */ +/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */ #define ANOMALY_05000095 (__SILICON_REVISION__ < 2) -/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */ +/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */ #define ANOMALY_05000096 (__SILICON_REVISION__ < 2) /* Performance Monitor 0 and 1 are swapped when monitoring memory events */ #define ANOMALY_05000097 (__SILICON_REVISION__ < 2) @@ -233,45 +249,45 @@ #define ANOMALY_05000100 (__SILICON_REVISION__ < 2) /* Reading X_MODIFY or Y_MODIFY while DMA channel is active */ #define ANOMALY_05000101 (__SILICON_REVISION__ < 2) -/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ +/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */ #define ANOMALY_05000102 (__SILICON_REVISION__ < 2) -/* Incorrect value written to the cycle counters */ +/* Incorrect Value Written to the Cycle Counters */ #define ANOMALY_05000103 (__SILICON_REVISION__ < 2) -/* Stores to L1 Data memory incorrect when a specific sequence is followed */ +/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */ #define ANOMALY_05000104 (__SILICON_REVISION__ < 2) /* Programmable Flag (PF3) functionality not supported in all PPI modes */ #define ANOMALY_05000106 (__SILICON_REVISION__ < 2) /* Data store can be lost when targeting a cache line fill */ #define ANOMALY_05000107 (__SILICON_REVISION__ < 2) -/* Reserved bits in SYSCFG register not set at power on */ +/* Reserved Bits in SYSCFG Register Not Set at Power-On */ #define ANOMALY_05000109 (__SILICON_REVISION__ < 3) /* Infinite Core Stall */ #define ANOMALY_05000114 (__SILICON_REVISION__ < 2) -/* PPI_FSx may glitch when generated by the on chip Timers */ +/* PPI_FSx may glitch when generated by the on chip Timers. */ #define ANOMALY_05000115 (__SILICON_REVISION__ < 2) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) /* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */ #define ANOMALY_05000117 (__SILICON_REVISION__ < 2) /* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */ #define ANOMALY_05000118 (__SILICON_REVISION__ < 2) -/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ +/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */ #define ANOMALY_05000123 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ #define ANOMALY_05000124 (__SILICON_REVISION__ < 3) -/* Erroneous exception when enabling cache */ +/* Erroneous Exception when Enabling Cache */ #define ANOMALY_05000125 (__SILICON_REVISION__ < 3) /* SPI clock polarity and phase bits incorrect during booting */ #define ANOMALY_05000126 (__SILICON_REVISION__ < 3) -/* DMEM_CONTROL is not set on Reset */ +/* DMEM_CONTROL<12> Is Not Set on Reset */ #define ANOMALY_05000137 (__SILICON_REVISION__ < 3) /* SPI boot will not complete if there is a zero fill block in the loader file */ #define ANOMALY_05000138 (__SILICON_REVISION__ == 2) -/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */ +/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */ #define ANOMALY_05000139 (__SILICON_REVISION__ < 2) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -285,7 +301,7 @@ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ +/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */ #define ANOMALY_05000148 (__SILICON_REVISION__ < 3) /* Frame Delay in SPORT Multichannel Mode */ #define ANOMALY_05000153 (__SILICON_REVISION__ < 3) @@ -293,13 +309,13 @@ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ #define ANOMALY_05000155 (__SILICON_REVISION__ < 3) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* SDRAM auto-refresh and subsequent Power Ups */ +/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 3) -/* DATA CPLB page miss can result in lost write-through cache data writes */ +/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */ #define ANOMALY_05000169 (__SILICON_REVISION__ < 3) /* DMA vs Core accesses to external memory */ #define ANOMALY_05000173 (__SILICON_REVISION__ < 3) @@ -307,32 +323,47 @@ #define ANOMALY_05000174 (__SILICON_REVISION__ < 3) /* Overlapping Sequencer and Memory Stalls */ #define ANOMALY_05000175 (__SILICON_REVISION__ < 3) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */ #define ANOMALY_05000176 (__SILICON_REVISION__ < 3) -/* Disabling the PPI resets the PPI configuration registers */ +/* Disabling the PPI Resets the PPI Configuration Registers */ #define ANOMALY_05000181 (__SILICON_REVISION__ < 3) -/* PPI TX Mode with 2 External Frame Syncs */ +/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */ #define ANOMALY_05000185 (__SILICON_REVISION__ < 3) /* PPI does not invert the Driving PPICLK edge in Transmit Modes */ #define ANOMALY_05000191 (__SILICON_REVISION__ < 3) -/* In PPI Transmit Modes with External Frame Syncs POLC */ +/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000120 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000182 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000287 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf533/def_local.h b/arch/blackfin/include/asm/mach-bf533/def_local.h index 14c111f..c545b54 100644 --- a/arch/blackfin/include/asm/mach-bf533/def_local.h +++ b/arch/blackfin/include/asm/mach-bf533/def_local.h @@ -1 +1,5 @@ +#include "gpio.h" +#include "portmux.h" #include "ports.h" + +#define BF533_FAMILY 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf533/gpio.h b/arch/blackfin/include/asm/mach-bf533/gpio.h new file mode 100644 index 0000000..e02416d --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf533/gpio.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 16 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 + +#define PORT_F GPIO_PF0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf533/portmux.h b/arch/blackfin/include/asm/mach-bf533/portmux.h new file mode 100644 index 0000000..96f5d91 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf533/portmux.h @@ -0,0 +1,71 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_CLK (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_PPI0_FS2 (P_DONTCARE) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11)) +#define P_PPI0_D0 (P_DONTCARE) +#define P_PPI0_D1 (P_DONTCARE) +#define P_PPI0_D2 (P_DONTCARE) +#define P_PPI0_D3 (P_DONTCARE) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12)) + +#define P_SPORT1_TSCLK (P_DONTCARE) +#define P_SPORT1_RSCLK (P_DONTCARE) +#define P_SPORT0_TSCLK (P_DONTCARE) +#define P_SPORT0_RSCLK (P_DONTCARE) +#define P_UART0_RX (P_DONTCARE) +#define P_UART0_TX (P_DONTCARE) +#define P_SPORT1_DRSEC (P_DONTCARE) +#define P_SPORT1_RFS (P_DONTCARE) +#define P_SPORT1_DTPRI (P_DONTCARE) +#define P_SPORT1_DTSEC (P_DONTCARE) +#define P_SPORT1_TFS (P_DONTCARE) +#define P_SPORT1_DRPRI (P_DONTCARE) +#define P_SPORT0_DRSEC (P_DONTCARE) +#define P_SPORT0_RFS (P_DONTCARE) +#define P_SPORT0_DTPRI (P_DONTCARE) +#define P_SPORT0_DTSEC (P_DONTCARE) +#define P_SPORT0_TFS (P_DONTCARE) +#define P_SPORT0_DRPRI (P_DONTCARE) + +#define P_SPI0_MOSI (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) +#define P_SPI0_SCK (P_DONTCARE) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2 +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 + +#define P_TMR2 (P_DONTCARE) +#define P_TMR1 (P_DONTCARE) +#define P_TMR0 (P_DONTCARE) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf537/anomaly.h b/arch/blackfin/include/asm/mach-bf537/anomaly.h index b7f1a3f..43df6af 100644 --- a/arch/blackfin/include/asm/mach-bf537/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf537/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf537/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -34,13 +38,13 @@ # define ANOMALY_BF537 0 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 2) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) @@ -50,11 +54,11 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* CLKIN Buffer Output Enable Reset Behavior Is Changed */ +/* Buffered CLKIN Output Is Disabled by Default */ #define ANOMALY_05000247 (1) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ < 3) -/* EMAC Tx DMA error after an early frame abort */ +/* EMAC TX DMA Error After an Early Frame Abort */ #define ANOMALY_05000252 (__SILICON_REVISION__ < 3) /* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (__SILICON_REVISION__ < 3) @@ -62,7 +66,7 @@ #define ANOMALY_05000254 (__SILICON_REVISION__ > 2) /* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ #define ANOMALY_05000255 (__SILICON_REVISION__ < 3) -/* EMAC MDIO input latched on wrong MDC edge */ +/* EMAC MDIO Input Latched on Wrong MDC Edge */ #define ANOMALY_05000256 (__SILICON_REVISION__ < 3) /* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ #define ANOMALY_05000257 (__SILICON_REVISION__ < 3) @@ -80,7 +84,7 @@ #define ANOMALY_05000264 (__SILICON_REVISION__ < 3) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) -/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */ +/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */ #define ANOMALY_05000268 (__SILICON_REVISION__ < 3) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 3) @@ -92,15 +96,15 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) -/* SPI Master boot mode does not work well with Atmel Data flash devices */ +/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */ #define ANOMALY_05000280 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 3) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 3) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (__SILICON_REVISION__ < 3) -/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */ +/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */ #define ANOMALY_05000285 (__SILICON_REVISION__ < 3) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 3) @@ -112,25 +116,25 @@ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) -/* Writing UART_THR while UART clock is disabled sends erroneous start bit */ +/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */ #define ANOMALY_05000309 (__SILICON_REVISION__ < 3) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode: collisions occur in Full Duplex mode */ +/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */ #define ANOMALY_05000316 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */ +/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */ #define ANOMALY_05000321 (__SILICON_REVISION__ < 3) -/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ +/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) -/* New Feature: UART Remains Enabled after UART Boot */ +/* UART Gets Disabled after UART Boot */ #define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (1) @@ -143,7 +147,7 @@ /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) +#define ANOMALY_05000402 (__SILICON_REVISION__ == 2) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) /* Speculative Fetches Can Cause Undesired External FIFO Operations */ @@ -154,29 +158,66 @@ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) +#define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) +#define ANOMALY_05000248 (0) #define ANOMALY_05000266 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000287 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf537/def_local.h b/arch/blackfin/include/asm/mach-bf537/def_local.h index 14c111f..e210db9 100644 --- a/arch/blackfin/include/asm/mach-bf537/def_local.h +++ b/arch/blackfin/include/asm/mach-bf537/def_local.h @@ -1 +1,5 @@ +#include "gpio.h" +#include "portmux.h" #include "ports.h" + +#define BF537_FAMILY 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf537/gpio.h b/arch/blackfin/include/asm/mach-bf537/gpio.h new file mode 100644 index 0000000..f80c299 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf537/gpio.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf537/portmux.h b/arch/blackfin/include/asm/mach-bf537/portmux.h new file mode 100644 index 0000000..71d9eae --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf537/portmux.h @@ -0,0 +1,152 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ + +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10 +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) + +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0)) +#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1)) + +#define PORT_PJ0 (GPIO_PH15 + 1) +#define PORT_PJ1 (GPIO_PH15 + 2) +#define PORT_PJ2 (GPIO_PH15 + 3) +#define PORT_PJ3 (GPIO_PH15 + 4) +#define PORT_PJ4 (GPIO_PH15 + 5) +#define PORT_PJ5 (GPIO_PH15 + 6) +#define PORT_PJ6 (GPIO_PH15 + 7) +#define PORT_PJ7 (GPIO_PH15 + 8) +#define PORT_PJ8 (GPIO_PH15 + 9) +#define PORT_PJ9 (GPIO_PH15 + 10) +#define PORT_PJ10 (GPIO_PH15 + 11) +#define PORT_PJ11 (GPIO_PH15 + 12) + +#define P_MDC (P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0)) +#define P_MDIO (P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0)) +#define P_TWI0_SCL (P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0)) +#define P_TWI0_SDA (P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1)) +#define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2)) + +#define P_MII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_ERxER, \ + P_MII0_CRS, \ + P_MDC, \ + P_MDIO, 0} + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_RMII0_REF_CLK, \ + P_RMII0_MDINT, \ + P_RMII0_CRS_DV, \ + P_MDC, \ + P_MDIO, 0} + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf548/anomaly.h b/arch/blackfin/include/asm/mach-bf548/anomaly.h index 192dd67..7bda09c 100644 --- a/arch/blackfin/include/asm/mach-bf548/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf548/anomaly.h @@ -1,41 +1,54 @@ /* - * File: include/asm-blackfin/mach-bf548/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* We do not support 0.0 or 0.1 silicon - sorry */ +/* XXX: let u-boot slide +#if __SILICON_REVISION__ < 2 +# error will not work on BF548 silicon version 0.0, or 0.1 +#endif +*/ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) +/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000220 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (__SILICON_REVISION__ < 1) /* TWI Slave Boot Mode Is Not Functional */ #define ANOMALY_05000324 (__SILICON_REVISION__ < 1) -/* External FIFO Boot Mode Is Not Functional */ +/* FIFO Boot Mode Not Functional */ #define ANOMALY_05000325 (__SILICON_REVISION__ < 2) /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ #define ANOMALY_05000327 (__SILICON_REVISION__ < 1) @@ -157,6 +170,8 @@ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (__SILICON_REVISION__ < 3) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) /* OTP Write Accesses Not Supported */ #define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ @@ -170,32 +185,93 @@ /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ #define ANOMALY_05000449 (__SILICON_REVISION__ == 1) /* USB DMA Mode 1 Short Packet Data Corruption */ -#define ANOMALY_05000450 (1 +#define ANOMALY_05000450 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) +/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ +#define ANOMALY_05000456 (1) +/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ +#define ANOMALY_05000457 (1) +/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */ +#define ANOMALY_05000460 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* USB DMA RX Data Corruption */ +#define ANOMALY_05000463 (1) +/* USB TX DMA Hang */ +#define ANOMALY_05000464 (1) +/* USB Rx DMA hang */ +#define ANOMALY_05000465 (1) +/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ +#define ANOMALY_05000466 (1) +/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +#define ANOMALY_05000467 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ +#define ANOMALY_05000474 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ +#define ANOMALY_05000483 (1) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000254 (0) +#define ANOMALY_05000257 (0) #define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000283 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) #define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) +#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000400 (0) +#define ANOMALY_05000402 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf548/def_local.h b/arch/blackfin/include/asm/mach-bf548/def_local.h index 81eca83..f1e69a7 100644 --- a/arch/blackfin/include/asm/mach-bf548/def_local.h +++ b/arch/blackfin/include/asm/mach-bf548/def_local.h @@ -1,2 +1,6 @@ +#include "gpio.h" #include "mem_map.h" +#include "portmux.h" #include "ports.h" + +#define CONFIG_BF54x 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf548/gpio.h b/arch/blackfin/include/asm/mach-bf548/gpio.h new file mode 100644 index 0000000..28037e3 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf548/gpio.h @@ -0,0 +1,203 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define GPIO_PA0 0 +#define GPIO_PA1 1 +#define GPIO_PA2 2 +#define GPIO_PA3 3 +#define GPIO_PA4 4 +#define GPIO_PA5 5 +#define GPIO_PA6 6 +#define GPIO_PA7 7 +#define GPIO_PA8 8 +#define GPIO_PA9 9 +#define GPIO_PA10 10 +#define GPIO_PA11 11 +#define GPIO_PA12 12 +#define GPIO_PA13 13 +#define GPIO_PA14 14 +#define GPIO_PA15 15 +#define GPIO_PB0 16 +#define GPIO_PB1 17 +#define GPIO_PB2 18 +#define GPIO_PB3 19 +#define GPIO_PB4 20 +#define GPIO_PB5 21 +#define GPIO_PB6 22 +#define GPIO_PB7 23 +#define GPIO_PB8 24 +#define GPIO_PB9 25 +#define GPIO_PB10 26 +#define GPIO_PB11 27 +#define GPIO_PB12 28 +#define GPIO_PB13 29 +#define GPIO_PB14 30 +#define GPIO_PB15 31 /* N/A */ +#define GPIO_PC0 32 +#define GPIO_PC1 33 +#define GPIO_PC2 34 +#define GPIO_PC3 35 +#define GPIO_PC4 36 +#define GPIO_PC5 37 +#define GPIO_PC6 38 +#define GPIO_PC7 39 +#define GPIO_PC8 40 +#define GPIO_PC9 41 +#define GPIO_PC10 42 +#define GPIO_PC11 43 +#define GPIO_PC12 44 +#define GPIO_PC13 45 +#define GPIO_PC14 46 /* N/A */ +#define GPIO_PC15 47 /* N/A */ +#define GPIO_PD0 48 +#define GPIO_PD1 49 +#define GPIO_PD2 50 +#define GPIO_PD3 51 +#define GPIO_PD4 52 +#define GPIO_PD5 53 +#define GPIO_PD6 54 +#define GPIO_PD7 55 +#define GPIO_PD8 56 +#define GPIO_PD9 57 +#define GPIO_PD10 58 +#define GPIO_PD11 59 +#define GPIO_PD12 60 +#define GPIO_PD13 61 +#define GPIO_PD14 62 +#define GPIO_PD15 63 +#define GPIO_PE0 64 +#define GPIO_PE1 65 +#define GPIO_PE2 66 +#define GPIO_PE3 67 +#define GPIO_PE4 68 +#define GPIO_PE5 69 +#define GPIO_PE6 70 +#define GPIO_PE7 71 +#define GPIO_PE8 72 +#define GPIO_PE9 73 +#define GPIO_PE10 74 +#define GPIO_PE11 75 +#define GPIO_PE12 76 +#define GPIO_PE13 77 +#define GPIO_PE14 78 +#define GPIO_PE15 79 +#define GPIO_PF0 80 +#define GPIO_PF1 81 +#define GPIO_PF2 82 +#define GPIO_PF3 83 +#define GPIO_PF4 84 +#define GPIO_PF5 85 +#define GPIO_PF6 86 +#define GPIO_PF7 87 +#define GPIO_PF8 88 +#define GPIO_PF9 89 +#define GPIO_PF10 90 +#define GPIO_PF11 91 +#define GPIO_PF12 92 +#define GPIO_PF13 93 +#define GPIO_PF14 94 +#define GPIO_PF15 95 +#define GPIO_PG0 96 +#define GPIO_PG1 97 +#define GPIO_PG2 98 +#define GPIO_PG3 99 +#define GPIO_PG4 100 +#define GPIO_PG5 101 +#define GPIO_PG6 102 +#define GPIO_PG7 103 +#define GPIO_PG8 104 +#define GPIO_PG9 105 +#define GPIO_PG10 106 +#define GPIO_PG11 107 +#define GPIO_PG12 108 +#define GPIO_PG13 109 +#define GPIO_PG14 110 +#define GPIO_PG15 111 +#define GPIO_PH0 112 +#define GPIO_PH1 113 +#define GPIO_PH2 114 +#define GPIO_PH3 115 +#define GPIO_PH4 116 +#define GPIO_PH5 117 +#define GPIO_PH6 118 +#define GPIO_PH7 119 +#define GPIO_PH8 120 +#define GPIO_PH9 121 +#define GPIO_PH10 122 +#define GPIO_PH11 123 +#define GPIO_PH12 124 +#define GPIO_PH13 125 +#define GPIO_PH14 126 /* N/A */ +#define GPIO_PH15 127 /* N/A */ +#define GPIO_PI0 128 +#define GPIO_PI1 129 +#define GPIO_PI2 130 +#define GPIO_PI3 131 +#define GPIO_PI4 132 +#define GPIO_PI5 133 +#define GPIO_PI6 134 +#define GPIO_PI7 135 +#define GPIO_PI8 136 +#define GPIO_PI9 137 +#define GPIO_PI10 138 +#define GPIO_PI11 139 +#define GPIO_PI12 140 +#define GPIO_PI13 141 +#define GPIO_PI14 142 +#define GPIO_PI15 143 +#define GPIO_PJ0 144 +#define GPIO_PJ1 145 +#define GPIO_PJ2 146 +#define GPIO_PJ3 147 +#define GPIO_PJ4 148 +#define GPIO_PJ5 149 +#define GPIO_PJ6 150 +#define GPIO_PJ7 151 +#define GPIO_PJ8 152 +#define GPIO_PJ9 153 +#define GPIO_PJ10 154 +#define GPIO_PJ11 155 +#define GPIO_PJ12 156 +#define GPIO_PJ13 157 +#define GPIO_PJ14 158 /* N/A */ +#define GPIO_PJ15 159 /* N/A */ + +#define MAX_BLACKFIN_GPIOS 160 + +#ifndef __ASSEMBLY__ + +struct gpio_port_t { + unsigned short port_fer; + unsigned short dummy1; + unsigned short data; + unsigned short dummy2; + unsigned short data_set; + unsigned short dummy3; + unsigned short data_clear; + unsigned short dummy4; + unsigned short dir_set; + unsigned short dummy5; + unsigned short dir_clear; + unsigned short dummy6; + unsigned short inen; + unsigned short dummy7; + unsigned int port_mux; +}; + +struct gpio_port_s { + unsigned short fer; + unsigned short data; + unsigned short dir; + unsigned short inen; + unsigned int mux; +}; + +#endif + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf548/portmux.h b/arch/blackfin/include/asm/mach-bf548/portmux.h new file mode 100644 index 0000000..e222462 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf548/portmux.h @@ -0,0 +1,320 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) +#define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) +#define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) +#define P_SPORT2_TSCLK (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0)) +#define P_SPORT2_RFS (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0)) +#define P_SPORT2_DRSEC (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0)) +#define P_SPORT2_DRPRI (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0)) +#define P_SPORT2_RSCLK (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0)) +#define P_SPORT3_TFS (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0)) +#define P_SPORT3_DTSEC (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0)) +#define P_SPORT3_DTPRI (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0)) +#define P_SPORT3_TSCLK (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0)) +#define P_SPORT3_RFS (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0)) +#define P_SPORT3_DRSEC (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0)) +#define P_SPORT3_DRPRI (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0)) +#define P_SPORT3_RSCLK (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1)) + +#define P_TWI1_SCL (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0)) +#define P_TWI1_SDA (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0)) +#define P_UART3_RTS (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0)) +#define P_UART3_CTS (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0)) +#define P_UART2_TX (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0)) +#define P_UART2_RX (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0)) +#define P_UART3_TX (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0)) +#define P_UART3_RX (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0)) +#define P_SPI2_SS (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0)) +#define P_SPI2_SSEL1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(0)) +#define P_SPI2_SSEL2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0)) +#define P_SPI2_SSEL3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0)) +#define P_SPI2_SCK (P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(0)) +#define P_SPI2_MOSI (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0)) +#define P_SPI2_MISO (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(1)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(1)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(1)) + +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) +#define P_SD_D0 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(0)) +#define P_SD_D1 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) +#define P_SD_D2 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(0)) +#define P_SD_D3 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(0)) +#define P_SD_CLK (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0)) +#define P_SD_CMD (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0)) +#define P_MMCLK (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1)) +#define P_MBCLK (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1)) + +#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0)) +#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0)) +#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0)) +#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0)) +#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0)) +#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0)) +#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0)) +#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(0)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(0)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0)) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(0)) + +#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1)) +#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1)) +#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(1)) +#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(1)) +#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(1)) +#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(1)) +#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1)) +#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1)) +#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1)) +#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1)) +#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1)) +#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(1)) +#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1)) +#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(1)) +#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(1)) +#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(2)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(2)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(2)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(2)) +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(2)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(2)) +#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(2)) +#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2)) +#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2)) +#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(2)) +#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2)) +#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(2)) +#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(2)) +#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2)) +#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(3)) +#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(3)) +#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(3)) +#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(3)) +#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(3)) +#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(3)) +#define P_KEY_ROW0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(3)) +#define P_KEY_ROW1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(3)) +#define P_KEY_ROW2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(3)) +#define P_KEY_ROW3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3)) +#define P_KEY_COL0 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3)) +#define P_KEY_COL1 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(3)) +#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) +#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) + +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4 +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(0)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(0)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(0)) +#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(0)) +#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0)) +#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0)) +#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0)) +#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) +#define P_TWI0_SCL (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) +#define P_TWI0_SDA (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0)) +#define P_KEY_COL7 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1)) +#define P_KEY_ROW6 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1)) +#define P_KEY_COL6 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1)) +#define P_KEY_ROW5 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1)) +#define P_KEY_COL5 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1)) +#define P_KEY_ROW4 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1)) +#define P_KEY_COL4 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1)) +#define P_KEY_ROW7 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1)) + +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) + +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT +# define P_ATAPI_D0A (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +# define P_ATAPI_D1A (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +# define P_ATAPI_D2A (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +# define P_ATAPI_D3A (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +# define P_ATAPI_D4A (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +# define P_ATAPI_D5A (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +# define P_ATAPI_D6A (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +# define P_ATAPI_D7A (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +# define P_ATAPI_D8A (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +# define P_ATAPI_D9A (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +# define P_ATAPI_D10A (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +# define P_ATAPI_D11A (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +# define P_ATAPI_D12A (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +# define P_ATAPI_D13A (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +# define P_ATAPI_D14A (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +# define P_ATAPI_D15A (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#else +# define P_ATAPI_D0A (P_DONTCARE) +# define P_ATAPI_D1A (P_DONTCARE) +# define P_ATAPI_D2A (P_DONTCARE) +# define P_ATAPI_D3A (P_DONTCARE) +# define P_ATAPI_D4A (P_DONTCARE) +# define P_ATAPI_D5A (P_DONTCARE) +# define P_ATAPI_D6A (P_DONTCARE) +# define P_ATAPI_D7A (P_DONTCARE) +# define P_ATAPI_D8A (P_DONTCARE) +# define P_ATAPI_D9A (P_DONTCARE) +# define P_ATAPI_D10A (P_DONTCARE) +# define P_ATAPI_D11A (P_DONTCARE) +# define P_ATAPI_D12A (P_DONTCARE) +# define P_ATAPI_D13A (P_DONTCARE) +# define P_ATAPI_D14A (P_DONTCARE) +# define P_ATAPI_D15A (P_DONTCARE) +#endif + +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_CAN1_TX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_CAN1_RX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT +# define P_ATAPI_A0A (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1)) +# define P_ATAPI_A1A (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +# define P_ATAPI_A2A (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#else +# define P_ATAPI_A0A (P_DONTCARE) +# define P_ATAPI_A1A (P_DONTCARE) +# define P_ATAPI_A2A (P_DONTCARE) +#endif +#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_MTXONB (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2)) +#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(3)) + +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_ATAPI_RESET (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0)) +#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0)) +#define P_MTX (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0)) +#define P_MRX (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0)) +#define P_MRXONB (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0)) +#define P_A4 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0)) +#define P_A5 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0)) +#define P_A6 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0)) +#define P_A7 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0)) +#define P_A8 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0)) +#define P_A9 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0)) +#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_TMR8 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) +#define P_TMR9 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1)) +#define P_TMR10 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1)) +#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1)) +#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2)) +#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2)) +#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) + +#define P_A10 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI0) | P_FUNCT(0)) +#define P_A11 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI1) | P_FUNCT(0)) +#define P_A12 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI2) | P_FUNCT(0)) +#define P_A13 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI3) | P_FUNCT(0)) +#define P_A14 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI4) | P_FUNCT(0)) +#define P_A15 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI5) | P_FUNCT(0)) +#define P_A16 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI6) | P_FUNCT(0)) +#define P_A17 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI7) | P_FUNCT(0)) +#define P_A18 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI8) | P_FUNCT(0)) +#define P_A19 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI9) | P_FUNCT(0)) +#define P_A20 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI10) | P_FUNCT(0)) +#define P_A21 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI11) | P_FUNCT(0)) +#define P_A22 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI12) | P_FUNCT(0)) +#define P_A23 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI13) | P_FUNCT(0)) +#define P_A24 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI14) | P_FUNCT(0)) +#define P_A25 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(0)) +#define P_NOR_CLK (P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(1)) + +#define P_AMC_ARDY_NOR_WAIT (P_DEFINED | P_IDENT(GPIO_PJ0) | P_FUNCT(0)) +#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PJ1) | P_FUNCT(0)) +#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PJ2) | P_FUNCT(0)) +#define P_ATAPI_DIOR (P_DEFINED | P_IDENT(GPIO_PJ3) | P_FUNCT(0)) +#define P_ATAPI_DIOW (P_DEFINED | P_IDENT(GPIO_PJ4) | P_FUNCT(0)) +#define P_ATAPI_CS0 (P_DEFINED | P_IDENT(GPIO_PJ5) | P_FUNCT(0)) +#define P_ATAPI_CS1 (P_DEFINED | P_IDENT(GPIO_PJ6) | P_FUNCT(0)) +#define P_ATAPI_DMACK (P_DEFINED | P_IDENT(GPIO_PJ7) | P_FUNCT(0)) +#define P_ATAPI_DMARQ (P_DEFINED | P_IDENT(GPIO_PJ8) | P_FUNCT(0)) +#define P_ATAPI_INTRQ (P_DEFINED | P_IDENT(GPIO_PJ9) | P_FUNCT(0)) +#define P_ATAPI_IORDY (P_DEFINED | P_IDENT(GPIO_PJ10) | P_FUNCT(0)) +#define P_AMC_BR (P_DEFINED | P_IDENT(GPIO_PJ11) | P_FUNCT(0)) +#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0)) +#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0)) + + +#define P_NAND_D0 (P_DONTCARE) +#define P_NAND_D1 (P_DONTCARE) +#define P_NAND_D2 (P_DONTCARE) +#define P_NAND_D3 (P_DONTCARE) +#define P_NAND_D4 (P_DONTCARE) +#define P_NAND_D5 (P_DONTCARE) +#define P_NAND_D6 (P_DONTCARE) +#define P_NAND_D7 (P_DONTCARE) +#define P_NAND_WE (P_DONTCARE) +#define P_NAND_RE (P_DONTCARE) +#define P_NAND_CLE (P_DONTCARE) +#define P_NAND_ALE (P_DONTCARE) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf561/anomaly.h b/arch/blackfin/include/asm/mach-bf561/anomaly.h index e4aa20c..4c108c9 100644 --- a/arch/blackfin/include/asm/mach-bf561/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf561/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf561/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -18,19 +22,19 @@ # error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ #define ANOMALY_05000116 (__SILICON_REVISION__ < 3) -/* Testset instructions restricted to 32-bit aligned memory locations */ +/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */ #define ANOMALY_05000120 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Erroneous exception when enabling cache */ +/* Erroneous Exception when Enabling Cache */ #define ANOMALY_05000125 (__SILICON_REVISION__ < 3) -/* Signbits instruction not functional under certain conditions */ +/* SIGNBITS Instruction Not Functional under Certain Conditions */ #define ANOMALY_05000127 (1) /* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ #define ANOMALY_05000134 (__SILICON_REVISION__ < 3) @@ -40,7 +44,7 @@ #define ANOMALY_05000136 (__SILICON_REVISION__ < 3) /* Allowing the SPORT RX FIFO to fill will cause an overflow */ #define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ #define ANOMALY_05000141 (__SILICON_REVISION__ < 3) /* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ #define ANOMALY_05000142 (__SILICON_REVISION__ < 3) @@ -52,7 +56,7 @@ #define ANOMALY_05000146 (__SILICON_REVISION__ < 3) /* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ #define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* IMDMA S1/D1 channel may stall */ +/* IMDMA S1/D1 Channel May Stall */ #define ANOMALY_05000149 (1) /* DMA engine may lose data due to incorrect handshaking */ #define ANOMALY_05000150 (__SILICON_REVISION__ < 3) @@ -66,7 +70,7 @@ #define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ #define ANOMALY_05000156 (__SILICON_REVISION__ < 4) -/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 3) /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ #define ANOMALY_05000159 (__SILICON_REVISION__ < 3) @@ -76,17 +80,17 @@ #define ANOMALY_05000161 (__SILICON_REVISION__ < 3) /* DMEM_CONTROL<12> is not set on Reset */ #define ANOMALY_05000162 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ #define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ #define ANOMALY_05000167 (1) -/* SDRAM auto-refresh and subsequent Power Ups */ +/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */ #define ANOMALY_05000168 (__SILICON_REVISION__ < 5) -/* DATA CPLB page miss can result in lost write-through cache data writes */ +/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */ #define ANOMALY_05000169 (__SILICON_REVISION__ < 5) -/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */ #define ANOMALY_05000171 (__SILICON_REVISION__ < 5) /* DSPID register values incorrect */ #define ANOMALY_05000172 (__SILICON_REVISION__ < 3) @@ -96,29 +100,29 @@ #define ANOMALY_05000174 (__SILICON_REVISION__ < 5) /* Overlapping Sequencer and Memory Stalls */ #define ANOMALY_05000175 (__SILICON_REVISION__ < 5) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */ #define ANOMALY_05000176 (__SILICON_REVISION__ < 5) /* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ #define ANOMALY_05000179 (__SILICON_REVISION__ < 5) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) -/* Disabling the PPI resets the PPI configuration registers */ +/* Disabling the PPI Resets the PPI Configuration Registers */ #define ANOMALY_05000181 (__SILICON_REVISION__ < 5) -/* IMDMA does not operate to full speed for 600MHz and higher devices */ +/* Internal Memory DMA Does Not Operate at Full Speed */ #define ANOMALY_05000182 (1) -/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ #define ANOMALY_05000184 (__SILICON_REVISION__ < 5) -/* PPI TX Mode with 2 External Frame Syncs */ +/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */ #define ANOMALY_05000185 (__SILICON_REVISION__ < 5) -/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */ #define ANOMALY_05000186 (__SILICON_REVISION__ < 5) /* IMDMA Corrupted Data after a Halt */ #define ANOMALY_05000187 (1) /* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ #define ANOMALY_05000188 (__SILICON_REVISION__ < 5) -/* False Protection Exceptions */ +/* False Protection Exceptions when Speculative Fetch Is Cancelled */ #define ANOMALY_05000189 (__SILICON_REVISION__ < 5) -/* PPI not functional at core voltage < 1Volt */ +/* PPI Not Functional at Core Voltage < 1Volt */ #define ANOMALY_05000190 (1) /* PPI does not invert the Driving PPICLK edge in Transmit Modes */ #define ANOMALY_05000191 (__SILICON_REVISION__ < 3) @@ -126,7 +130,7 @@ #define ANOMALY_05000193 (__SILICON_REVISION__ < 5) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ #define ANOMALY_05000194 (__SILICON_REVISION__ < 5) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +/* Failing MMR Accesses when Preceding Memory Read Stalls */ #define ANOMALY_05000198 (__SILICON_REVISION__ < 5) /* Current DMA Address Shows Wrong Value During Carry Fix */ #define ANOMALY_05000199 (__SILICON_REVISION__ < 5) @@ -134,9 +138,9 @@ #define ANOMALY_05000200 (__SILICON_REVISION__ < 5) /* Possible Infinite Stall with Specific Dual-DAG Situation */ #define ANOMALY_05000202 (__SILICON_REVISION__ < 5) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */ #define ANOMALY_05000204 (__SILICON_REVISION__ < 5) -/* Specific sequence that can cause DMA error or DMA stopping */ +/* Specific Sequence that Can Cause DMA Error or DMA Stopping */ #define ANOMALY_05000205 (__SILICON_REVISION__ < 5) /* Recovery from "Brown-Out" Condition */ #define ANOMALY_05000207 (__SILICON_REVISION__ < 5) @@ -148,8 +152,8 @@ #define ANOMALY_05000215 (__SILICON_REVISION__ < 5) /* NMI Event at Boot Time Results in Unpredictable State */ #define ANOMALY_05000219 (__SILICON_REVISION__ < 5) -/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ -#define ANOMALY_05000220 (__SILICON_REVISION__ < 5) +/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000220 (__SILICON_REVISION__ < 4) /* Incorrect Pulse-Width of UART Start Bit */ #define ANOMALY_05000225 (__SILICON_REVISION__ < 5) /* Scratchpad Memory Bank Reads May Return Incorrect Data */ @@ -158,7 +162,7 @@ #define ANOMALY_05000230 (__SILICON_REVISION__ < 5) /* UART STB Bit Incorrectly Affects Receiver Setting */ #define ANOMALY_05000231 (__SILICON_REVISION__ < 5) -/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */ #define ANOMALY_05000232 (__SILICON_REVISION__ < 5) /* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ #define ANOMALY_05000242 (__SILICON_REVISION__ < 5) @@ -166,7 +170,7 @@ #define ANOMALY_05000244 (__SILICON_REVISION__ < 5) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (__SILICON_REVISION__ < 5) -/* TESTSET operation forces stall on the other core */ +/* TESTSET Operation Forces Stall on the Other Core */ #define ANOMALY_05000248 (__SILICON_REVISION__ < 5) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) @@ -192,9 +196,9 @@ #define ANOMALY_05000264 (__SILICON_REVISION__ < 5) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (__SILICON_REVISION__ < 5) -/* IMDMA destination IRQ status must be read prior to using IMDMA */ +/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */ #define ANOMALY_05000266 (__SILICON_REVISION__ > 3) -/* IMDMA may corrupt data under certain conditions */ +/* IMDMA May Corrupt Data under Certain Conditions */ #define ANOMALY_05000267 (1) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ #define ANOMALY_05000269 (1) @@ -202,7 +206,7 @@ #define ANOMALY_05000270 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* Data cache write back to external synchronous memory may be lost */ +/* Data Cache Write Back to External Synchronous Memory May Be Lost */ #define ANOMALY_05000274 (1) /* PPI Timing and Sampling Information Updates */ #define ANOMALY_05000275 (__SILICON_REVISION__ > 2) @@ -212,17 +216,21 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) -/* False Hardware Error Exception When ISR Context Is Not Restored */ -#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* Temporarily walk around for bug 5423 till this issue is confirmed by + * official anomaly document. It looks 05000281 still exists on bf561 + * v0.5. + */ +#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5) +/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (1) -/* A read will receive incorrect data under certain conditions */ +/* Reads Will Receive Incorrect Data under Certain Conditions */ #define ANOMALY_05000287 (__SILICON_REVISION__ < 5) /* SPORTs May Receive Bad Data If FIFOs Fill Up */ #define ANOMALY_05000288 (__SILICON_REVISION__ < 5) /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ #define ANOMALY_05000301 (1) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) /* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) @@ -230,25 +238,25 @@ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ #define ANOMALY_05000312 (1) /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */ #define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +/* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (1) -/* PF2 Output Remains Asserted After SPI Master Boot */ +/* PF2 Output Remains Asserted after SPI Master Boot */ #define ANOMALY_05000320 (__SILICON_REVISION__ > 3) -/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +/* Erroneous GPIO Flag Pin Operations under Specific Sequences */ #define ANOMALY_05000323 (1) -/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */ #define ANOMALY_05000326 (__SILICON_REVISION__ > 3) -/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +/* 24-Bit SPI Boot Mode Is Not Functional */ #define ANOMALY_05000331 (__SILICON_REVISION__ < 5) -/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +/* Slave SPI Boot Mode Is Not Functional */ #define ANOMALY_05000332 (__SILICON_REVISION__ < 5) -/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */ #define ANOMALY_05000333 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */ +/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000339 (__SILICON_REVISION__ < 5) /* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */ #define ANOMALY_05000343 (__SILICON_REVISION__ < 5) @@ -262,6 +270,8 @@ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ == 4) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) /* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */ @@ -276,19 +286,43 @@ #define ANOMALY_05000428 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (__SILICON_REVISION__ < 4) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ +#define ANOMALY_05000119 (0) #define ANOMALY_05000158 (0) #define ANOMALY_05000183 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf561/def_local.h b/arch/blackfin/include/asm/mach-bf561/def_local.h index 597dcec..08e37e5 100644 --- a/arch/blackfin/include/asm/mach-bf561/def_local.h +++ b/arch/blackfin/include/asm/mach-bf561/def_local.h @@ -9,4 +9,8 @@ #define bfin_write_WDOG_CTL(val) bfin_write_WDOGA_CTL(val) #define bfin_write_WDOG_STAT(val) bfin_write_WDOGA_STAT(val) +#include "gpio.h" +#include "portmux.h" #include "ports.h" + +#define BF561_FAMILY 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf561/gpio.h b/arch/blackfin/include/asm/mach-bf561/gpio.h new file mode 100644 index 0000000..4f8aa5d --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf561/gpio.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 48 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PF16 16 +#define GPIO_PF17 17 +#define GPIO_PF18 18 +#define GPIO_PF19 19 +#define GPIO_PF20 20 +#define GPIO_PF21 21 +#define GPIO_PF22 22 +#define GPIO_PF23 23 +#define GPIO_PF24 24 +#define GPIO_PF25 25 +#define GPIO_PF26 26 +#define GPIO_PF27 27 +#define GPIO_PF28 28 +#define GPIO_PF29 29 +#define GPIO_PF30 30 +#define GPIO_PF31 31 +#define GPIO_PF32 32 +#define GPIO_PF33 33 +#define GPIO_PF34 34 +#define GPIO_PF35 35 +#define GPIO_PF36 36 +#define GPIO_PF37 37 +#define GPIO_PF38 38 +#define GPIO_PF39 39 +#define GPIO_PF40 40 +#define GPIO_PF41 41 +#define GPIO_PF42 42 +#define GPIO_PF43 43 +#define GPIO_PF44 44 +#define GPIO_PF45 45 +#define GPIO_PF46 46 +#define GPIO_PF47 47 + +#define PORT_FIO0 GPIO_0 +#define PORT_FIO1 GPIO_16 +#define PORT_FIO2 GPIO_32 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf561/portmux.h b/arch/blackfin/include/asm/mach-bf561/portmux.h new file mode 100644 index 0000000..2339ffd --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf561/portmux.h @@ -0,0 +1,97 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +#define P_PPI0_CLK (P_DONTCARE) +#define P_PPI0_FS1 (P_DONTCARE) +#define P_PPI0_FS2 (P_DONTCARE) +#define P_PPI0_FS3 (P_DONTCARE) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF47)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF46)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF45)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF44)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF43)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF42)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF41)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF40)) +#define P_PPI0_D0 (P_DONTCARE) +#define P_PPI0_D1 (P_DONTCARE) +#define P_PPI0_D2 (P_DONTCARE) +#define P_PPI0_D3 (P_DONTCARE) +#define P_PPI0_D4 (P_DONTCARE) +#define P_PPI0_D5 (P_DONTCARE) +#define P_PPI0_D6 (P_DONTCARE) +#define P_PPI0_D7 (P_DONTCARE) +#define P_PPI1_CLK (P_DONTCARE) +#define P_PPI1_FS1 (P_DONTCARE) +#define P_PPI1_FS2 (P_DONTCARE) +#define P_PPI1_FS3 (P_DONTCARE) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PF39)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PF38)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PF37)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PF36)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PF35)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PF34)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PF33)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PF32)) +#define P_PPI1_D0 (P_DONTCARE) +#define P_PPI1_D1 (P_DONTCARE) +#define P_PPI1_D2 (P_DONTCARE) +#define P_PPI1_D3 (P_DONTCARE) +#define P_PPI1_D4 (P_DONTCARE) +#define P_PPI1_D5 (P_DONTCARE) +#define P_PPI1_D6 (P_DONTCARE) +#define P_PPI1_D7 (P_DONTCARE) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF31)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF30)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF29)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF28)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF27)) +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF26)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF25)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF24)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF23)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF22)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF21)) +#define P_SPORT1_DRPRI (P_DONTCARE) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF20)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF19)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF18)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF17)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF16)) +#define P_SPORT0_DRPRI (P_DONTCARE) +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_TMR11 (P_DONTCARE) +#define P_TMR10 (P_DONTCARE) +#define P_TMR9 (P_DONTCARE) +#define P_TMR8 (P_DONTCARE) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF7)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF6)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF5)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF4)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF3)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF1)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_SPI0_MOSI (P_DONTCARE) +#define P_SPI0_MISO (P_DONTCARE) +#define P_SPI0_SCK (P_DONTCARE) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2 +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h new file mode 100644 index 0000000..b17207f --- /dev/null +++ b/arch/blackfin/include/asm/portmux.h @@ -0,0 +1,1194 @@ +/* + * Common header file for Blackfin family of processors + * + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _PORTMUX_H_ +#define _PORTMUX_H_ + +#define P_IDENT(x) ((x) & 0x1FF) +#define P_FUNCT(x) (((x) & 0x3) << 9) +#define P_FUNCT2MUX(x) (((x) >> 9) & 0x3) +#define P_DEFINED 0x8000 +#define P_UNDEF 0x4000 +#define P_MAYSHARE 0x2000 +#define P_DONTCARE 0x1000 + +#ifndef CONFIG_BFIN_GPIO_TRACK +#define peripheral_request(per, label) peripheral_request(per) +#define peripheral_request_list(per, label) peripheral_request_list(per) +#endif + +int peripheral_request(unsigned short per, const char *label); +void peripheral_free(unsigned short per); +int peripheral_request_list(const unsigned short per[], const char *label); +void peripheral_free_list(const unsigned short per[]); + +#include <asm/blackfin.h> + +#ifndef P_SPORT2_TFS +#define P_SPORT2_TFS P_UNDEF +#endif + +#ifndef P_SPORT2_DTSEC +#define P_SPORT2_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT2_DTPRI +#define P_SPORT2_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT2_TSCLK +#define P_SPORT2_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT2_RFS +#define P_SPORT2_RFS P_UNDEF +#endif + +#ifndef P_SPORT2_DRSEC +#define P_SPORT2_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT2_DRPRI +#define P_SPORT2_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT2_RSCLK +#define P_SPORT2_RSCLK P_UNDEF +#endif + +#ifndef P_SPORT3_TFS +#define P_SPORT3_TFS P_UNDEF +#endif + +#ifndef P_SPORT3_DTSEC +#define P_SPORT3_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT3_DTPRI +#define P_SPORT3_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT3_TSCLK +#define P_SPORT3_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT3_RFS +#define P_SPORT3_RFS P_UNDEF +#endif + +#ifndef P_SPORT3_DRSEC +#define P_SPORT3_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT3_DRPRI +#define P_SPORT3_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT3_RSCLK +#define P_SPORT3_RSCLK P_UNDEF +#endif + +#ifndef P_TMR4 +#define P_TMR4 P_UNDEF +#endif + +#ifndef P_TMR5 +#define P_TMR5 P_UNDEF +#endif + +#ifndef P_TMR6 +#define P_TMR6 P_UNDEF +#endif + +#ifndef P_TMR7 +#define P_TMR7 P_UNDEF +#endif + +#ifndef P_TWI1_SCL +#define P_TWI1_SCL P_UNDEF +#endif + +#ifndef P_TWI1_SDA +#define P_TWI1_SDA P_UNDEF +#endif + +#ifndef P_UART3_RTS +#define P_UART3_RTS P_UNDEF +#endif + +#ifndef P_UART3_CTS +#define P_UART3_CTS P_UNDEF +#endif + +#ifndef P_UART2_TX +#define P_UART2_TX P_UNDEF +#endif + +#ifndef P_UART2_RX +#define P_UART2_RX P_UNDEF +#endif + +#ifndef P_UART3_TX +#define P_UART3_TX P_UNDEF +#endif + +#ifndef P_UART3_RX +#define P_UART3_RX P_UNDEF +#endif + +#ifndef P_SPI2_SS +#define P_SPI2_SS P_UNDEF +#endif + +#ifndef P_SPI2_SSEL1 +#define P_SPI2_SSEL1 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL2 +#define P_SPI2_SSEL2 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL3 +#define P_SPI2_SSEL3 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL4 +#define P_SPI2_SSEL4 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL5 +#define P_SPI2_SSEL5 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL6 +#define P_SPI2_SSEL6 P_UNDEF +#endif + +#ifndef P_SPI2_SSEL7 +#define P_SPI2_SSEL7 P_UNDEF +#endif + +#ifndef P_SPI2_SCK +#define P_SPI2_SCK P_UNDEF +#endif + +#ifndef P_SPI2_MOSI +#define P_SPI2_MOSI P_UNDEF +#endif + +#ifndef P_SPI2_MISO +#define P_SPI2_MISO P_UNDEF +#endif + +#ifndef P_TMR0 +#define P_TMR0 P_UNDEF +#endif + +#ifndef P_TMR1 +#define P_TMR1 P_UNDEF +#endif + +#ifndef P_TMR2 +#define P_TMR2 P_UNDEF +#endif + +#ifndef P_TMR3 +#define P_TMR3 P_UNDEF +#endif + +#ifndef P_SPORT0_TFS +#define P_SPORT0_TFS P_UNDEF +#endif + +#ifndef P_SPORT0_DTSEC +#define P_SPORT0_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT0_DTPRI +#define P_SPORT0_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT0_TSCLK +#define P_SPORT0_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT0_RFS +#define P_SPORT0_RFS P_UNDEF +#endif + +#ifndef P_SPORT0_DRSEC +#define P_SPORT0_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT0_DRPRI +#define P_SPORT0_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT0_RSCLK +#define P_SPORT0_RSCLK P_UNDEF +#endif + +#ifndef P_SD_D0 +#define P_SD_D0 P_UNDEF +#endif + +#ifndef P_SD_D1 +#define P_SD_D1 P_UNDEF +#endif + +#ifndef P_SD_D2 +#define P_SD_D2 P_UNDEF +#endif + +#ifndef P_SD_D3 +#define P_SD_D3 P_UNDEF +#endif + +#ifndef P_SD_CLK +#define P_SD_CLK P_UNDEF +#endif + +#ifndef P_SD_CMD +#define P_SD_CMD P_UNDEF +#endif + +#ifndef P_MMCLK +#define P_MMCLK P_UNDEF +#endif + +#ifndef P_MBCLK +#define P_MBCLK P_UNDEF +#endif + +#ifndef P_PPI1_D0 +#define P_PPI1_D0 P_UNDEF +#endif + +#ifndef P_PPI1_D1 +#define P_PPI1_D1 P_UNDEF +#endif + +#ifndef P_PPI1_D2 +#define P_PPI1_D2 P_UNDEF +#endif + +#ifndef P_PPI1_D3 +#define P_PPI1_D3 P_UNDEF +#endif + +#ifndef P_PPI1_D4 +#define P_PPI1_D4 P_UNDEF +#endif + +#ifndef P_PPI1_D5 +#define P_PPI1_D5 P_UNDEF +#endif + +#ifndef P_PPI1_D6 +#define P_PPI1_D6 P_UNDEF +#endif + +#ifndef P_PPI1_D7 +#define P_PPI1_D7 P_UNDEF +#endif + +#ifndef P_PPI1_D8 +#define P_PPI1_D8 P_UNDEF +#endif + +#ifndef P_PPI1_D9 +#define P_PPI1_D9 P_UNDEF +#endif + +#ifndef P_PPI1_D10 +#define P_PPI1_D10 P_UNDEF +#endif + +#ifndef P_PPI1_D11 +#define P_PPI1_D11 P_UNDEF +#endif + +#ifndef P_PPI1_D12 +#define P_PPI1_D12 P_UNDEF +#endif + +#ifndef P_PPI1_D13 +#define P_PPI1_D13 P_UNDEF +#endif + +#ifndef P_PPI1_D14 +#define P_PPI1_D14 P_UNDEF +#endif + +#ifndef P_PPI1_D15 +#define P_PPI1_D15 P_UNDEF +#endif + +#ifndef P_HOST_D8 +#define P_HOST_D8 P_UNDEF +#endif + +#ifndef P_HOST_D9 +#define P_HOST_D9 P_UNDEF +#endif + +#ifndef P_HOST_D10 +#define P_HOST_D10 P_UNDEF +#endif + +#ifndef P_HOST_D11 +#define P_HOST_D11 P_UNDEF +#endif + +#ifndef P_HOST_D12 +#define P_HOST_D12 P_UNDEF +#endif + +#ifndef P_HOST_D13 +#define P_HOST_D13 P_UNDEF +#endif + +#ifndef P_HOST_D14 +#define P_HOST_D14 P_UNDEF +#endif + +#ifndef P_HOST_D15 +#define P_HOST_D15 P_UNDEF +#endif + +#ifndef P_HOST_D0 +#define P_HOST_D0 P_UNDEF +#endif + +#ifndef P_HOST_D1 +#define P_HOST_D1 P_UNDEF +#endif + +#ifndef P_HOST_D2 +#define P_HOST_D2 P_UNDEF +#endif + +#ifndef P_HOST_D3 +#define P_HOST_D3 P_UNDEF +#endif + +#ifndef P_HOST_D4 +#define P_HOST_D4 P_UNDEF +#endif + +#ifndef P_HOST_D5 +#define P_HOST_D5 P_UNDEF +#endif + +#ifndef P_HOST_D6 +#define P_HOST_D6 P_UNDEF +#endif + +#ifndef P_HOST_D7 +#define P_HOST_D7 P_UNDEF +#endif + +#ifndef P_SPORT1_TFS +#define P_SPORT1_TFS P_UNDEF +#endif + +#ifndef P_SPORT1_DTSEC +#define P_SPORT1_DTSEC P_UNDEF +#endif + +#ifndef P_SPORT1_DTPRI +#define P_SPORT1_DTPRI P_UNDEF +#endif + +#ifndef P_SPORT1_TSCLK +#define P_SPORT1_TSCLK P_UNDEF +#endif + +#ifndef P_SPORT1_RFS +#define P_SPORT1_RFS P_UNDEF +#endif + +#ifndef P_SPORT1_DRSEC +#define P_SPORT1_DRSEC P_UNDEF +#endif + +#ifndef P_SPORT1_DRPRI +#define P_SPORT1_DRPRI P_UNDEF +#endif + +#ifndef P_SPORT1_RSCLK +#define P_SPORT1_RSCLK P_UNDEF +#endif + +#ifndef P_PPI2_D0 +#define P_PPI2_D0 P_UNDEF +#endif + +#ifndef P_PPI2_D1 +#define P_PPI2_D1 P_UNDEF +#endif + +#ifndef P_PPI2_D2 +#define P_PPI2_D2 P_UNDEF +#endif + +#ifndef P_PPI2_D3 +#define P_PPI2_D3 P_UNDEF +#endif + +#ifndef P_PPI2_D4 +#define P_PPI2_D4 P_UNDEF +#endif + +#ifndef P_PPI2_D5 +#define P_PPI2_D5 P_UNDEF +#endif + +#ifndef P_PPI2_D6 +#define P_PPI2_D6 P_UNDEF +#endif + +#ifndef P_PPI2_D7 +#define P_PPI2_D7 P_UNDEF +#endif + +#ifndef P_PPI0_D18 +#define P_PPI0_D18 P_UNDEF +#endif + +#ifndef P_PPI0_D19 +#define P_PPI0_D19 P_UNDEF +#endif + +#ifndef P_PPI0_D20 +#define P_PPI0_D20 P_UNDEF +#endif + +#ifndef P_PPI0_D21 +#define P_PPI0_D21 P_UNDEF +#endif + +#ifndef P_PPI0_D22 +#define P_PPI0_D22 P_UNDEF +#endif + +#ifndef P_PPI0_D23 +#define P_PPI0_D23 P_UNDEF +#endif + +#ifndef P_KEY_ROW0 +#define P_KEY_ROW0 P_UNDEF +#endif + +#ifndef P_KEY_ROW1 +#define P_KEY_ROW1 P_UNDEF +#endif + +#ifndef P_KEY_ROW2 +#define P_KEY_ROW2 P_UNDEF +#endif + +#ifndef P_KEY_ROW3 +#define P_KEY_ROW3 P_UNDEF +#endif + +#ifndef P_KEY_COL0 +#define P_KEY_COL0 P_UNDEF +#endif + +#ifndef P_KEY_COL1 +#define P_KEY_COL1 P_UNDEF +#endif + +#ifndef P_KEY_COL2 +#define P_KEY_COL2 P_UNDEF +#endif + +#ifndef P_KEY_COL3 +#define P_KEY_COL3 P_UNDEF +#endif + +#ifndef P_SPI0_SCK +#define P_SPI0_SCK P_UNDEF +#endif + +#ifndef P_SPI0_MISO +#define P_SPI0_MISO P_UNDEF +#endif + +#ifndef P_SPI0_MOSI +#define P_SPI0_MOSI P_UNDEF +#endif + +#ifndef P_SPI0_SS +#define P_SPI0_SS P_UNDEF +#endif + +#ifndef P_SPI0_SSEL1 +#define P_SPI0_SSEL1 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL2 +#define P_SPI0_SSEL2 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL3 +#define P_SPI0_SSEL3 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL4 +#define P_SPI0_SSEL4 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL5 +#define P_SPI0_SSEL5 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL6 +#define P_SPI0_SSEL6 P_UNDEF +#endif + +#ifndef P_SPI0_SSEL7 +#define P_SPI0_SSEL7 P_UNDEF +#endif + +#ifndef P_UART0_TX +#define P_UART0_TX P_UNDEF +#endif + +#ifndef P_UART0_RX +#define P_UART0_RX P_UNDEF +#endif + +#ifndef P_UART1_RTS +#define P_UART1_RTS P_UNDEF +#endif + +#ifndef P_UART1_CTS +#define P_UART1_CTS P_UNDEF +#endif + +#ifndef P_PPI1_CLK +#define P_PPI1_CLK P_UNDEF +#endif + +#ifndef P_PPI1_FS1 +#define P_PPI1_FS1 P_UNDEF +#endif + +#ifndef P_PPI1_FS2 +#define P_PPI1_FS2 P_UNDEF +#endif + +#ifndef P_TWI0_SCL +#define P_TWI0_SCL P_UNDEF +#endif + +#ifndef P_TWI0_SDA +#define P_TWI0_SDA P_UNDEF +#endif + +#ifndef P_KEY_COL7 +#define P_KEY_COL7 P_UNDEF +#endif + +#ifndef P_KEY_ROW6 +#define P_KEY_ROW6 P_UNDEF +#endif + +#ifndef P_KEY_COL6 +#define P_KEY_COL6 P_UNDEF +#endif + +#ifndef P_KEY_ROW5 +#define P_KEY_ROW5 P_UNDEF +#endif + +#ifndef P_KEY_COL5 +#define P_KEY_COL5 P_UNDEF +#endif + +#ifndef P_KEY_ROW4 +#define P_KEY_ROW4 P_UNDEF +#endif + +#ifndef P_KEY_COL4 +#define P_KEY_COL4 P_UNDEF +#endif + +#ifndef P_KEY_ROW7 +#define P_KEY_ROW7 P_UNDEF +#endif + +#ifndef P_PPI0_D0 +#define P_PPI0_D0 P_UNDEF +#endif + +#ifndef P_PPI0_D1 +#define P_PPI0_D1 P_UNDEF +#endif + +#ifndef P_PPI0_D2 +#define P_PPI0_D2 P_UNDEF +#endif + +#ifndef P_PPI0_D3 +#define P_PPI0_D3 P_UNDEF +#endif + +#ifndef P_PPI0_D4 +#define P_PPI0_D4 P_UNDEF +#endif + +#ifndef P_PPI0_D5 +#define P_PPI0_D5 P_UNDEF +#endif + +#ifndef P_PPI0_D6 +#define P_PPI0_D6 P_UNDEF +#endif + +#ifndef P_PPI0_D7 +#define P_PPI0_D7 P_UNDEF +#endif + +#ifndef P_PPI0_D8 +#define P_PPI0_D8 P_UNDEF +#endif + +#ifndef P_PPI0_D9 +#define P_PPI0_D9 P_UNDEF +#endif + +#ifndef P_PPI0_D10 +#define P_PPI0_D10 P_UNDEF +#endif + +#ifndef P_PPI0_D11 +#define P_PPI0_D11 P_UNDEF +#endif + +#ifndef P_PPI0_D12 +#define P_PPI0_D12 P_UNDEF +#endif + +#ifndef P_PPI0_D13 +#define P_PPI0_D13 P_UNDEF +#endif + +#ifndef P_PPI0_D14 +#define P_PPI0_D14 P_UNDEF +#endif + +#ifndef P_PPI0_D15 +#define P_PPI0_D15 P_UNDEF +#endif + +#ifndef P_ATAPI_D0A +#define P_ATAPI_D0A P_UNDEF +#endif + +#ifndef P_ATAPI_D1A +#define P_ATAPI_D1A P_UNDEF +#endif + +#ifndef P_ATAPI_D2A +#define P_ATAPI_D2A P_UNDEF +#endif + +#ifndef P_ATAPI_D3A +#define P_ATAPI_D3A P_UNDEF +#endif + +#ifndef P_ATAPI_D4A +#define P_ATAPI_D4A P_UNDEF +#endif + +#ifndef P_ATAPI_D5A +#define P_ATAPI_D5A P_UNDEF +#endif + +#ifndef P_ATAPI_D6A +#define P_ATAPI_D6A P_UNDEF +#endif + +#ifndef P_ATAPI_D7A +#define P_ATAPI_D7A P_UNDEF +#endif + +#ifndef P_ATAPI_D8A +#define P_ATAPI_D8A P_UNDEF +#endif + +#ifndef P_ATAPI_D9A +#define P_ATAPI_D9A P_UNDEF +#endif + +#ifndef P_ATAPI_D10A +#define P_ATAPI_D10A P_UNDEF +#endif + +#ifndef P_ATAPI_D11A +#define P_ATAPI_D11A P_UNDEF +#endif + +#ifndef P_ATAPI_D12A +#define P_ATAPI_D12A P_UNDEF +#endif + +#ifndef P_ATAPI_D13A +#define P_ATAPI_D13A P_UNDEF +#endif + +#ifndef P_ATAPI_D14A +#define P_ATAPI_D14A P_UNDEF +#endif + +#ifndef P_ATAPI_D15A +#define P_ATAPI_D15A P_UNDEF +#endif + +#ifndef P_PPI0_CLK +#define P_PPI0_CLK P_UNDEF +#endif + +#ifndef P_PPI0_FS1 +#define P_PPI0_FS1 P_UNDEF +#endif + +#ifndef P_PPI0_FS2 +#define P_PPI0_FS2 P_UNDEF +#endif + +#ifndef P_PPI0_D16 +#define P_PPI0_D16 P_UNDEF +#endif + +#ifndef P_PPI0_D17 +#define P_PPI0_D17 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL1 +#define P_SPI1_SSEL1 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL2 +#define P_SPI1_SSEL2 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL3 +#define P_SPI1_SSEL3 P_UNDEF +#endif + + +#ifndef P_SPI1_SSEL4 +#define P_SPI1_SSEL4 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL5 +#define P_SPI1_SSEL5 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL6 +#define P_SPI1_SSEL6 P_UNDEF +#endif + +#ifndef P_SPI1_SSEL7 +#define P_SPI1_SSEL7 P_UNDEF +#endif + +#ifndef P_SPI1_SCK +#define P_SPI1_SCK P_UNDEF +#endif + +#ifndef P_SPI1_MISO +#define P_SPI1_MISO P_UNDEF +#endif + +#ifndef P_SPI1_MOSI +#define P_SPI1_MOSI P_UNDEF +#endif + +#ifndef P_SPI1_SS +#define P_SPI1_SS P_UNDEF +#endif + +#ifndef P_CAN0_TX +#define P_CAN0_TX P_UNDEF +#endif + +#ifndef P_CAN0_RX +#define P_CAN0_RX P_UNDEF +#endif + +#ifndef P_CAN1_TX +#define P_CAN1_TX P_UNDEF +#endif + +#ifndef P_CAN1_RX +#define P_CAN1_RX P_UNDEF +#endif + +#ifndef P_ATAPI_A0A +#define P_ATAPI_A0A P_UNDEF +#endif + +#ifndef P_ATAPI_A1A +#define P_ATAPI_A1A P_UNDEF +#endif + +#ifndef P_ATAPI_A2A +#define P_ATAPI_A2A P_UNDEF +#endif + +#ifndef P_HOST_CE +#define P_HOST_CE P_UNDEF +#endif + +#ifndef P_HOST_RD +#define P_HOST_RD P_UNDEF +#endif + +#ifndef P_HOST_WR +#define P_HOST_WR P_UNDEF +#endif + +#ifndef P_MTXONB +#define P_MTXONB P_UNDEF +#endif + +#ifndef P_PPI2_FS2 +#define P_PPI2_FS2 P_UNDEF +#endif + +#ifndef P_PPI2_FS1 +#define P_PPI2_FS1 P_UNDEF +#endif + +#ifndef P_PPI2_CLK +#define P_PPI2_CLK P_UNDEF +#endif + +#ifndef P_CNT_CZM +#define P_CNT_CZM P_UNDEF +#endif + +#ifndef P_UART1_TX +#define P_UART1_TX P_UNDEF +#endif + +#ifndef P_UART1_RX +#define P_UART1_RX P_UNDEF +#endif + +#ifndef P_ATAPI_RESET +#define P_ATAPI_RESET P_UNDEF +#endif + +#ifndef P_HOST_ADDR +#define P_HOST_ADDR P_UNDEF +#endif + +#ifndef P_HOST_ACK +#define P_HOST_ACK P_UNDEF +#endif + +#ifndef P_MTX +#define P_MTX P_UNDEF +#endif + +#ifndef P_MRX +#define P_MRX P_UNDEF +#endif + +#ifndef P_MRXONB +#define P_MRXONB P_UNDEF +#endif + +#ifndef P_A4 +#define P_A4 P_UNDEF +#endif + +#ifndef P_A5 +#define P_A5 P_UNDEF +#endif + +#ifndef P_A6 +#define P_A6 P_UNDEF +#endif + +#ifndef P_A7 +#define P_A7 P_UNDEF +#endif + +#ifndef P_A8 +#define P_A8 P_UNDEF +#endif + +#ifndef P_A9 +#define P_A9 P_UNDEF +#endif + +#ifndef P_PPI1_FS3 +#define P_PPI1_FS3 P_UNDEF +#endif + +#ifndef P_PPI2_FS3 +#define P_PPI2_FS3 P_UNDEF +#endif + +#ifndef P_TMR8 +#define P_TMR8 P_UNDEF +#endif + +#ifndef P_TMR9 +#define P_TMR9 P_UNDEF +#endif + +#ifndef P_TMR10 +#define P_TMR10 P_UNDEF +#endif +#ifndef P_TMR11 +#define P_TMR11 P_UNDEF +#endif + +#ifndef P_DMAR0 +#define P_DMAR0 P_UNDEF +#endif + +#ifndef P_DMAR1 +#define P_DMAR1 P_UNDEF +#endif + +#ifndef P_PPI0_FS3 +#define P_PPI0_FS3 P_UNDEF +#endif + +#ifndef P_CNT_CDG +#define P_CNT_CDG P_UNDEF +#endif + +#ifndef P_CNT_CUD +#define P_CNT_CUD P_UNDEF +#endif + +#ifndef P_A10 +#define P_A10 P_UNDEF +#endif + +#ifndef P_A11 +#define P_A11 P_UNDEF +#endif + +#ifndef P_A12 +#define P_A12 P_UNDEF +#endif + +#ifndef P_A13 +#define P_A13 P_UNDEF +#endif + +#ifndef P_A14 +#define P_A14 P_UNDEF +#endif + +#ifndef P_A15 +#define P_A15 P_UNDEF +#endif + +#ifndef P_A16 +#define P_A16 P_UNDEF +#endif + +#ifndef P_A17 +#define P_A17 P_UNDEF +#endif + +#ifndef P_A18 +#define P_A18 P_UNDEF +#endif + +#ifndef P_A19 +#define P_A19 P_UNDEF +#endif + +#ifndef P_A20 +#define P_A20 P_UNDEF +#endif + +#ifndef P_A21 +#define P_A21 P_UNDEF +#endif + +#ifndef P_A22 +#define P_A22 P_UNDEF +#endif + +#ifndef P_A23 +#define P_A23 P_UNDEF +#endif + +#ifndef P_A24 +#define P_A24 P_UNDEF +#endif + +#ifndef P_A25 +#define P_A25 P_UNDEF +#endif + +#ifndef P_NOR_CLK +#define P_NOR_CLK P_UNDEF +#endif + +#ifndef P_TMRCLK +#define P_TMRCLK P_UNDEF +#endif + +#ifndef P_AMC_ARDY_NOR_WAIT +#define P_AMC_ARDY_NOR_WAIT P_UNDEF +#endif + +#ifndef P_NAND_CE +#define P_NAND_CE P_UNDEF +#endif + +#ifndef P_NAND_RB +#define P_NAND_RB P_UNDEF +#endif + +#ifndef P_ATAPI_DIOR +#define P_ATAPI_DIOR P_UNDEF +#endif + +#ifndef P_ATAPI_DIOW +#define P_ATAPI_DIOW P_UNDEF +#endif + +#ifndef P_ATAPI_CS0 +#define P_ATAPI_CS0 P_UNDEF +#endif + +#ifndef P_ATAPI_CS1 +#define P_ATAPI_CS1 P_UNDEF +#endif + +#ifndef P_ATAPI_DMACK +#define P_ATAPI_DMACK P_UNDEF +#endif + +#ifndef P_ATAPI_DMARQ +#define P_ATAPI_DMARQ P_UNDEF +#endif + +#ifndef P_ATAPI_INTRQ +#define P_ATAPI_INTRQ P_UNDEF +#endif + +#ifndef P_ATAPI_IORDY +#define P_ATAPI_IORDY P_UNDEF +#endif + +#ifndef P_AMC_BR +#define P_AMC_BR P_UNDEF +#endif + +#ifndef P_AMC_BG +#define P_AMC_BG P_UNDEF +#endif + +#ifndef P_AMC_BGH +#define P_AMC_BGH P_UNDEF +#endif + +/* EMAC */ + +#ifndef P_MII0_ETxD0 +#define P_MII0_ETxD0 P_UNDEF +#endif + +#ifndef P_MII0_ETxD1 +#define P_MII0_ETxD1 P_UNDEF +#endif + +#ifndef P_MII0_ETxD2 +#define P_MII0_ETxD2 P_UNDEF +#endif + +#ifndef P_MII0_ETxD3 +#define P_MII0_ETxD3 P_UNDEF +#endif + +#ifndef P_MII0_ETxEN +#define P_MII0_ETxEN P_UNDEF +#endif + +#ifndef P_MII0_TxCLK +#define P_MII0_TxCLK P_UNDEF +#endif + +#ifndef P_MII0_PHYINT +#define P_MII0_PHYINT P_UNDEF +#endif + +#ifndef P_MII0_COL +#define P_MII0_COL P_UNDEF +#endif + +#ifndef P_MII0_ERxD0 +#define P_MII0_ERxD0 P_UNDEF +#endif + +#ifndef P_MII0_ERxD1 +#define P_MII0_ERxD1 P_UNDEF +#endif + +#ifndef P_MII0_ERxD2 +#define P_MII0_ERxD2 P_UNDEF +#endif + +#ifndef P_MII0_ERxD3 +#define P_MII0_ERxD3 P_UNDEF +#endif + +#ifndef P_MII0_ERxDV +#define P_MII0_ERxDV P_UNDEF +#endif + +#ifndef P_MII0_ERxCLK +#define P_MII0_ERxCLK P_UNDEF +#endif + +#ifndef P_MII0_ERxER +#define P_MII0_ERxER P_UNDEF +#endif + +#ifndef P_MII0_CRS +#define P_MII0_CRS P_UNDEF +#endif + +#ifndef P_RMII0_REF_CLK +#define P_RMII0_REF_CLK P_UNDEF +#endif + +#ifndef P_RMII0_MDINT +#define P_RMII0_MDINT P_UNDEF +#endif + +#ifndef P_RMII0_CRS_DV +#define P_RMII0_CRS_DV P_UNDEF +#endif + +#ifndef P_MDC +#define P_MDC P_UNDEF +#endif + +#ifndef P_MDIO +#define P_MDIO P_UNDEF +#endif + +#endif /* _PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 6bc7208..952438e 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -118,4 +118,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, return tmp; } +void bfin_reset_boot_spi_cs(unsigned short pin); + #endif /* _BLACKFIN_SYSTEM_H */ diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index 793cc43..aba96b3 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -30,3 +30,6 @@ PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ PLATFORM_CPPFLAGS += -G0 LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds + +LDFLAGS += --gc-sections +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/nios2/include/asm/gpio.h b/arch/nios2/include/asm/gpio.h index 76c425e..cff1dd9 100644 --- a/arch/nios2/include/asm/gpio.h +++ b/arch/nios2/include/asm/gpio.h @@ -21,6 +21,11 @@ #ifdef CONFIG_SYS_GPIO_BASE #include <asm/io.h> +static inline int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + static inline int gpio_direction_input(unsigned gpio) { writel(1, CONFIG_SYS_GPIO_BASE + (gpio << 2)); @@ -43,6 +48,7 @@ static inline void gpio_set_value(unsigned gpio, int value) writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2)); } #else +extern int gpio_request(unsigned gpio, const char *label); extern int gpio_direction_input(unsigned gpio); extern int gpio_direction_output(unsigned gpio, int value); extern int gpio_get_value(unsigned gpio); diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c index e4093a8..e25a113 100644 --- a/arch/nios2/lib/bootm.c +++ b/arch/nios2/lib/bootm.c @@ -34,6 +34,18 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima char *commandline = getenv("bootargs"); ulong initrd_start = images->rd_start; ulong initrd_end = images->rd_end; + char *of_flat_tree = NULL; +#if defined(CONFIG_OF_LIBFDT) + ulong of_size = 0; + + /* find flattened device tree */ + if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size)) + return 1; +#endif + if (!of_flat_tree) + of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16); + if (of_flat_tree) + initrd_end = (ulong)of_flat_tree; if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; @@ -45,6 +57,15 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima debug("bootargs=%s @ 0x%lx\n", commandline, (ulong)&commandline); debug("initrd=0x%lx-0x%lx\n", (ulong)initrd_start, (ulong)initrd_end); + /* kernel parameters passing + * r4 : NIOS magic + * r5 : initrd start + * r6 : initrd end or fdt + * r7 : kernel command line + * fdt is passed to kernel via r6, the same as initrd_end. fdt will be + * verified with fdt magic. when both initrd and fdt are used at the + * same time, fdt must follow immediately after initrd. + */ kernel(NIOS_MAGIC, initrd_start, initrd_end, commandline); /* does not return */ diff --git a/arch/powerpc/cpu/mpc512x/diu.c b/arch/powerpc/cpu/mpc512x/diu.c index f638c00..9ef5609 100644 --- a/arch/powerpc/cpu/mpc512x/diu.c +++ b/arch/powerpc/cpu/mpc512x/diu.c @@ -111,10 +111,8 @@ int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp, { unsigned int addr; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (!strncmp(argv[1], "init", 4)) { #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/arch/powerpc/cpu/mpc8260/bedbug_603e.c b/arch/powerpc/cpu/mpc8260/bedbug_603e.c index 2488612..89193a3 100644 --- a/arch/powerpc/cpu/mpc8260/bedbug_603e.c +++ b/arch/powerpc/cpu/mpc8260/bedbug_603e.c @@ -71,10 +71,7 @@ void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc, /* -------------------------------------------------- */ if (argc < 2) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); /* Turn off a breakpoint */ @@ -118,10 +115,7 @@ void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc, if(!(( isdigit( argv[ 1 ][ 0 ] )) || (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) || (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' )))) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); addr = simple_strtoul( argv[ 1 ], NULL, 16 ); diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index b664c64..6635109 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -55,6 +55,7 @@ int checkcpu(void) char name[15]; u32 partid; } cpu_type_list [] = { + CPU_TYPE_ENTRY(8308), CPU_TYPE_ENTRY(8311), CPU_TYPE_ENTRY(8313), CPU_TYPE_ENTRY(8314), @@ -125,72 +126,6 @@ int checkcpu(void) return 0; } - -/* - * Program a UPM with the code supplied in the table. - * - * The 'dummy' variable is used to increment the MAD. 'dummy' is - * supposed to be a pointer to the memory of the device being - * programmed by the UPM. The data in the MDR is written into - * memory and the MAD is incremented every time there's a write - * to 'dummy'. Unfortunately, the current prototype for this - * function doesn't allow for passing the address of this - * device, and changing the prototype will break a number lots - * of other code, so we need to use a round-about way of finding - * the value for 'dummy'. - * - * The value can be extracted from the base address bits of the - * Base Register (BR) associated with the specific UPM. To find - * that BR, we need to scan all 8 BRs until we find the one that - * has its MSEL bits matching the UPM we want. Once we know the - * right BR, we can extract the base address bits from it. - * - * The MxMR and the BR and OR of the chosen bank should all be - * configured before calling this function. - * - * Parameters: - * upm: 0=UPMA, 1=UPMB, 2=UPMC - * table: Pointer to an array of values to program - * size: Number of elements in the array. Must be 64 or less. - */ -void upmconfig (uint upm, uint *table, uint size) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; - volatile uchar *dummy = NULL; - const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ - volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ - uint i; - - /* Scan all the banks to determine the base address of the device */ - for (i = 0; i < 8; i++) { - if ((lbus->bank[i].br & BR_MSEL) == msel) { - dummy = (uchar *) (lbus->bank[i].br & BR_BA); - break; - } - } - - if (!dummy) { - printf("Error: %s() could not find matching BR\n", __FUNCTION__); - hang(); - } - - /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */ - *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; - - for (i = 0; i < size; i++) { - lbus->mdr = table[i]; - __asm__ __volatile__ ("sync"); - *dummy = 0; /* Write the value to memory and increment MAD */ - __asm__ __volatile__ ("sync"); - while(((*mxmr & 0x3f) != ((i + 1) & 0x3f))); - } - - /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ - *mxmr &= 0xCFFFFFC0; -} - - int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f3b67ae..83cba93 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im) /* LCRR - Clock Ratio Register (10.3.1.16) * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description */ - clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); - __raw_readl(&im->lbus.lcrr); + clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->im_lbc.lcrr); isync(); /* Enable Time Base & Decrementer ( so we will have udelay() )*/ @@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im) /* Config QE ioports */ config_qe_ioports(); #endif + /* Set up preliminary BR/OR regs */ + init_early_memctl_regs(); - /* - * Memory Controller: - */ - - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_BR0_PRELIM) \ - && defined(CONFIG_SYS_OR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWAR0_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM; + /* Local Access window setup */ +#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM) im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; #else -#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined +#error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined #endif -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM; - im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; #endif -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM; - im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; #endif -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM; - im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; #endif -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM; - im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; #endif -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM; - im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; #endif -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM; - im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; #endif -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM; - im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index 8dadd64..f8eab96 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -118,10 +118,8 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) writeback[0] = 0x01234567UL; writeback[1] = 0x89abcdefUL; - if (argc > 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 4) + return cmd_usage(cmdtp); if (argc == 2) { if (strcmp(argv[1], "status") == 0) { @@ -350,8 +348,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD(ecc, 4, 0, do_ecc, diff --git a/arch/powerpc/cpu/mpc83xx/nand_init.c b/arch/powerpc/cpu/mpc83xx/nand_init.c index 38e141a..d1648b7 100644 --- a/arch/powerpc/cpu/mpc83xx/nand_init.c +++ b/arch/powerpc/cpu/mpc83xx/nand_init.c @@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im) && defined(CONFIG_SYS_NAND_OR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM; + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM; #else diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index b5076a9..93e9f1c 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -100,7 +100,8 @@ int get_clocks(void) u32 lcrr; u32 csb_clk; -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; @@ -132,7 +133,8 @@ int get_clocks(void) u32 qe_clk; u32 brg_clk; #endif -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) u32 pciexp1_clk; u32 pciexp2_clk; #endif @@ -164,7 +166,8 @@ int get_clocks(void) sccr = im->clk.sccr; -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { case 0: tsec1_clk = 0; @@ -202,7 +205,8 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { case 0: tsec2_clk = 0; @@ -319,7 +323,7 @@ int get_clocks(void) i2c1_clk = csb_clk; #elif defined(CONFIG_MPC832x) i2c1_clk = enc_clk; -#elif defined(CONFIG_MPC831x) +#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) i2c1_clk = enc_clk; #elif defined(CONFIG_FSL_ESDHC) i2c1_clk = sdhc_clk; @@ -328,7 +332,8 @@ int get_clocks(void) i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ #endif -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) { case 0: pciexp1_clk = 0; @@ -388,7 +393,7 @@ int get_clocks(void) lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); - lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; + lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; switch (lcrr) { case 2: case 4: @@ -444,7 +449,8 @@ int get_clocks(void) #endif gd->csb_clk = csb_clk; -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) gd->tsec1_clk = tsec1_clk; gd->tsec2_clk = tsec2_clk; gd->usbdr_clk = usbdr_clk; @@ -525,7 +531,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_FSL_ESDHC) printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk)); #endif -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk)); printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk)); printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk)); diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index f064fee..fe851f1 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -32,6 +32,7 @@ START = start.o resetvec.o SOBJS-$(CONFIG_MP) += release.o SOBJS = $(SOBJS-y) +COBJS-$(CONFIG_CMD_ERRATA) += cmd_errata.o COBJS-$(CONFIG_CPM2) += commproc.o # supports ddr1 @@ -57,12 +58,15 @@ COBJS-$(CONFIG_P1021) += ddr-gen3.o COBJS-$(CONFIG_P1022) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_MP) += mp.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o +COBJS-$(CONFIG_P1022) += p1022_serdes.o COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c new file mode 100644 index 0000000..d7835c8 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -0,0 +1,51 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <linux/compiler.h> +#include <asm/processor.h> + +static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + __maybe_unused u32 svr = get_svr(); + +#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001) + if (IS_SVR_REV(svr, 1, 0)) { + switch (SVR_SOC_VER(svr)) { + case SVR_P1013: + case SVR_P1013_E: + case SVR_P1022: + case SVR_P1022_E: + puts("Work-around for Erratum SATA A001 enabled\n"); + } + } +#endif + + return 0; +} + +U_BOOT_CMD( + errata, 1, 0, do_errata, + "Report errata workarounds", + "" +); diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 6f81fdf..f15d43c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -32,6 +32,8 @@ #include <fsl_esdhc.h> #include <asm/cache.h> #include <asm/io.h> +#include <asm/mmu.h> +#include <asm/fsl_law.h> DECLARE_GLOBAL_DATA_PTR; @@ -93,18 +95,26 @@ int checkcpu (void) minor = PVR_MIN(pvr); printf("Core: "); - switch (fam) { - case PVR_FAM(PVR_85xx): - puts("E500"); - break; - default: - puts("Unknown"); - break; + if (PVR_FAM(PVR_85xx)) { + switch(PVR_MEM(pvr)) { + case 0x1: + case 0x2: + puts("E500"); + break; + case 0x3: + puts("E500MC"); + break; + case 0x4: + puts("E5500"); + break; + default: + puts("Unknown"); + break; + } + } else { + puts("Unknown"); } - if (PVR_MEM(pvr) == 0x03) - puts("MC"); - printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); get_sys_info(&sysinfo); @@ -169,7 +179,7 @@ int checkcpu (void) #ifdef CONFIG_SYS_DPAA_FMAN for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { - printf(" FMAN%d: %s MHz\n", i, + printf(" FMAN%d: %s MHz\n", i + 1, strmhz(buf1, sysinfo.freqFMan[i])); } #endif @@ -250,71 +260,6 @@ reset_85xx_watchdog(void) #endif /* CONFIG_WATCHDOG */ /* - * Configures a UPM. The function requires the respective MxMR to be set - * before calling this function. "size" is the number or entries, not a sizeof. - */ -void upmconfig (uint upm, uint * table, uint size) -{ - int i, mdr, mad, old_mad = 0; - volatile u32 *mxmr; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - volatile u32 *brp,*orp; - volatile u8* dummy = NULL; - int upmmask; - - switch (upm) { - case UPMA: - mxmr = &lbc->mamr; - upmmask = BR_MS_UPMA; - break; - case UPMB: - mxmr = &lbc->mbmr; - upmmask = BR_MS_UPMB; - break; - case UPMC: - mxmr = &lbc->mcmr; - upmmask = BR_MS_UPMC; - break; - default: - printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm); - hang(); - } - - /* Find the address for the dummy write transaction */ - for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8; - i++, brp += 2, orp += 2) { - - /* Look for a valid BR with selected UPM */ - if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { - dummy = (volatile u8*)(in_be32(brp) & BR_BA); - break; - } - } - - if (i == 8) { - printf("Error: %s() could not find matching BR\n", __FUNCTION__); - hang(); - } - - for (i = 0; i < size; i++) { - /* 1 */ - out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i); - /* 2 */ - out_be32(&lbc->mdr, table[i]); - /* 3 */ - mdr = in_be32(&lbc->mdr); - /* 4 */ - *(volatile u8 *)dummy = 0; - /* 5 */ - do { - mad = in_be32(mxmr) & MxMR_MAD_MSK; - } while (mad <= old_mad && !(!mad && i == (size-1))); - old_mad = mad; - } - out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM); -} - -/* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() */ @@ -326,3 +271,14 @@ int cpu_mmc_init(bd_t *bis) return 0; #endif } + +/* + * Print out the state of various machine registers. + * Currently prints out LAWs, BR0/OR0, and TLBs + */ +void mpc85xx_reginfo(void) +{ + print_tlbcam(); + print_laws(); + print_lbc_regs(); +} diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 99431dc..5d5b4c2 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -39,10 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MPC8536 -extern void fsl_serdes_init(void); -#endif - #ifdef CONFIG_QE extern qe_iop_conf_t qe_iop_conf_tab[]; extern void qe_config_iopin(u8 port, u8 pin, int dir, @@ -154,7 +150,6 @@ static void corenet_tb_init(void) void cpu_init_f (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); extern void m8560_cpm_reset (void); #ifdef CONFIG_MPC8548 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); @@ -177,60 +172,7 @@ void cpu_init_f (void) config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR); #endif - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ -#if defined(CONFIG_SYS_OR0_REMAP) - out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP); -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP); -#endif - - /* now restrict to preliminary range */ - /* if cs1 is already set via debugger, leave cs0/cs1 alone */ - if (! memctl->br1 & 1) { -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM); - out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM); - out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM); -#endif - } - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM); - out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM); - out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM); - out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM); - out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM); - out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM); - out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM); -#endif + init_early_memctl_regs(); #if defined(CONFIG_CPM2) m8560_cpm_reset(); @@ -239,9 +181,6 @@ void cpu_init_f (void) /* Config QE ioports */ config_qe_ioports(); #endif -#if defined(CONFIG_MPC8536) - fsl_serdes_init(); -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif @@ -263,7 +202,7 @@ void cpu_init_f (void) int cpu_init_r(void) { #ifdef CONFIG_SYS_LBC_LCRR - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif puts ("L2: "); @@ -386,6 +325,11 @@ int cpu_init_r(void) qe_reset(); #endif +#if defined(CONFIG_SYS_HAS_SERDES) + /* needs to be in ram since code uses global static vars */ + fsl_serdes_init(); +#endif + #if defined(CONFIG_MP) setup_mp(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c index 184cca4..8fb27ab 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c @@ -25,7 +25,7 @@ void cpu_init_f(void) { - ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + fsl_lbc_t *lbc = LBC_BASE_ADDR; /* * LCRR - Clock Ratio Register - set up local bus timing @@ -34,8 +34,8 @@ void cpu_init_f(void) out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8); #if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM) - out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM); - out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM); + set_lbc_br(0, CONFIG_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_NAND_OR_PRELIM); #else #error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined #endif diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 1d11ab4..932466e 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -298,17 +298,17 @@ void fdt_add_enet_stashing(void *fdt) } #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) -static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq) +static void ft_fixup_clks(void *blob, const char *compat, u32 offset, + unsigned long freq) { - const char *path = fdt_get_alias(blob, alias); - - int off = fdt_path_offset(blob, path); + phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; + int off = fdt_node_offset_by_compat_reg(blob, compat, phys); if (off >= 0) { off = fdt_setprop_cell(blob, off, "clock-frequency", freq); if (off > 0) printf("WARNING enable to set clock-frequency " - "for %s: %s\n", alias, fdt_strerror(off)); + "for %s: %s\n", compat, fdt_strerror(off)); } } @@ -317,14 +317,17 @@ static void ft_fixup_dpaa_clks(void *blob) sys_info_t sysinfo; get_sys_info(&sysinfo); - ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]); + ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, + sysinfo.freqFMan[0]); #if (CONFIG_SYS_NUM_FMAN == 2) - ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]); + ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, + sysinfo.freqFMan[1]); #endif #ifdef CONFIG_SYS_DPAA_PME - ft_fixup_clks(blob, "pme", sysinfo.freqPME); + do_fixup_by_compat_u32(blob, "fsl,pme", + "clock-frequency", sysinfo.freqPME, 1); #endif } #else @@ -400,12 +403,17 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", bd->bi_brgfreq, 1); #endif +#ifdef CONFIG_FSL_CORENET + do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", + "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); +#endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #ifdef CONFIG_MP ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); -#endif ft_fixup_num_cores(blob); +#endif ft_fixup_cache(blob); diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index ddbc221..e05257c 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -77,6 +77,13 @@ int cpu_disable(int nr) return 0; } + +int is_core_disabled(int nr) { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 coredisrl = in_be32(&gur->coredisrl); + + return (coredisrl & (1 << nr)); +} #else int cpu_disable(int nr) { @@ -96,6 +103,22 @@ int cpu_disable(int nr) return 0; } + +int is_core_disabled(int nr) { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr = in_be32(&gur->devdisr); + + switch (nr) { + case 0: + return (devdisr & MPC85xx_DEVDISR_CPU0); + case 1: + return (devdisr & MPC85xx_DEVDISR_CPU1); + default: + printf("Invalid cpu number for disable %d\n", nr); + } + + return 0; +} #endif static u8 boot_entry_map[4] = { diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c index 7e72f5f..6dadeb8 100644 --- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c @@ -66,10 +66,11 @@ #define FSL_SRDSCR3_LANEE_SGMII 0x00000000 #define FSL_SRDSCR3_LANEE_SATA 0x00150005 - #define SRDS1_MAX_LANES 8 #define SRDS2_MAX_LANES 2 +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, @@ -86,39 +87,12 @@ static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { int is_serdes_configured(enum srds_prtcl device) { - int i; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 pordevsr = in_be32(&gur->pordevsr); - u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int ret = (1 << device) & serdes1_prtcl_map; - u32 srds2_cfg = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> - GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT; - - debug("%s: dev = %d\n", __FUNCTION__, device); - debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg); - debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_cfg); - - if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg); - return 0; - } - - if (srds2_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { - printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_cfg); - return 0; - } - - for (i = 0; i < SRDS1_MAX_LANES; i++) { - if (serdes1_cfg_tbl[srds1_cfg][i] == device) - return 1; - } - for (i = 0; i < SRDS2_MAX_LANES; i++) { - if (serdes2_cfg_tbl[srds2_cfg][i] == device) - return 1; - } + if (ret) + return ret; - return 0; + return (1 << device) & serdes2_prtcl_map; } void fsl_serdes_init(void) @@ -126,13 +100,20 @@ void fsl_serdes_init(void) void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR; u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS); - u32 srds2_io_sel; + u32 srds1_io_sel, srds2_io_sel; u32 tmp; + int lane; + + srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; /* parse the SRDS2_IO_SEL of PORDEVSR */ srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL) >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT; + debug("PORDEVSR[SRDS1_IO_SEL] = %x\n", srds1_io_sel); + debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_io_sel); + switch (srds2_io_sel) { case 1: /* Lane A - SATA1, Lane E - SATA2 */ /* CR 0 */ @@ -246,4 +227,23 @@ void fsl_serdes_init(void) default: break; } + + if (srds1_io_sel > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[SRDS1_IO_SEL] = %d\n", srds1_io_sel); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_io_sel][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds2_io_sel > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds2_io_sel][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } } diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c new file mode 100644 index 0000000..e4c9c22 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c @@ -0,0 +1,114 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Author: Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 +#define SRDS2_MAX_LANES 2 + +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + +static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x00] = {NONE, NONE, NONE, NONE}, + [0x01] = {NONE, NONE, NONE, NONE}, + [0x02] = {NONE, NONE, NONE, NONE}, + [0x03] = {NONE, NONE, NONE, NONE}, + [0x04] = {NONE, NONE, NONE, NONE}, + [0x06] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2}, + [0x07] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2}, + [0x09] = {PCIE1, NONE, NONE, NONE}, + [0x0a] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2}, + [0x0b] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2}, + [0x0d] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x0e] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x0f] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x15] = {PCIE1, PCIE3, PCIE2, PCIE2}, + [0x16] = {PCIE1, PCIE3, PCIE2, PCIE2}, + [0x17] = {PCIE1, PCIE3, PCIE2, PCIE2}, + [0x18] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x19] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1a] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1b] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1c] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x1d] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1e] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1f] = {PCIE1, PCIE1, PCIE2, PCIE2}, +}; + +static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x00] = {PCIE3, PCIE3}, + [0x01] = {PCIE2, PCIE3}, + [0x02] = {SATA1, SATA2}, + [0x03] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x04] = {NONE, NONE}, + [0x06] = {SATA1, SATA2}, + [0x07] = {NONE, NONE}, + [0x09] = {PCIE3, PCIE2}, + [0x0a] = {SATA1, SATA2}, + [0x0b] = {NONE, NONE}, + [0x0d] = {PCIE3, PCIE2}, + [0x0e] = {SATA1, SATA2}, + [0x0f] = {NONE, NONE}, + [0x15] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x16] = {SATA1, SATA2}, + [0x17] = {NONE, NONE}, + [0x18] = {PCIE3, PCIE3}, + [0x19] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x1a] = {SATA1, SATA2}, + [0x1b] = {NONE, NONE}, + [0x1c] = {PCIE3, PCIE3}, + [0x1d] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x1e] = {SATA1, SATA2}, + [0x1f] = {NONE, NONE}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 8132115..dd4c6b3 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { #if defined(CONFIG_FSL_CORENET) diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index b3037ac..f2833a5 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -55,7 +55,45 @@ void init_tlbs(void) return ; } +void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, + phys_addr_t *rpn) +{ + u32 _mas1; + + mtspr(MAS0, FSL_BOOKE_MAS0(1, idx, 0)); + asm volatile("tlbre;isync"); + _mas1 = mfspr(MAS1); + + *valid = (_mas1 & MAS1_VALID); + *tsize = (_mas1 >> 8) & 0xf; + *epn = mfspr(MAS2) & MAS2_EPN; + *rpn = mfspr(MAS3) & MAS3_RPN; +#ifdef CONFIG_ENABLE_36BIT_PHYS + *rpn |= ((u64)mfspr(MAS7)) << 32; +#endif +} + #ifndef CONFIG_NAND_SPL +void print_tlbcam(void) +{ + int i; + unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff; + + /* walk all the entries */ + printf("TLBCAM entries\n"); + for (i = 0; i < num_cam; i++) { + unsigned long epn; + u32 tsize, valid; + phys_addr_t rpn; + + read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn); + printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:", + i, (valid == 0) ? 0 : 1, (unsigned int)epn, + (unsigned long long)rpn); + print_size(TSIZE_TO_BYTES(tsize), "\n"); + } +} + static inline void use_tlb_cam(u8 idx) { int i = idx / 32; @@ -82,15 +120,9 @@ void init_used_tlb_cams(void) /* walk all the entries */ for (i = 0; i < num_cam; i++) { - u32 _mas1; - mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0)); - asm volatile("tlbre;isync"); - _mas1 = mfspr(MAS1); - - /* if the entry isn't valid skip it */ - if ((_mas1 & MAS1_VALID)) + if (mfspr(MAS1) & MAS1_VALID) use_tlb_cam(i); } } @@ -134,7 +166,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, #ifdef CONFIG_ADDR_MAP if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) - addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel); + addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), esel); #endif } @@ -201,26 +233,12 @@ void init_addr_map(void) /* walk all the entries */ for (i = 0; i < num_cam; i++) { unsigned long epn; - u32 tsize, _mas1; + u32 tsize, valid; phys_addr_t rpn; - mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0)); - - asm volatile("tlbre;isync"); - _mas1 = mfspr(MAS1); - - /* if the entry isn't valid skip it */ - if (!(_mas1 & MAS1_VALID)) - continue; - - tsize = (_mas1 >> 8) & 0xf; - epn = mfspr(MAS2) & MAS2_EPN; - rpn = mfspr(MAS3) & MAS3_RPN; -#ifdef CONFIG_ENABLE_36BIT_PHYS - rpn |= ((phys_addr_t)mfspr(MAS7)) << 32; -#endif - - addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i); + read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn); + if (valid & MAS1_VALID) + addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), i); } return ; diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index 9064e78..4e90fd2 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -180,22 +180,9 @@ watchdog_reset(void) */ void mpc86xx_reginfo(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; - print_bats(); print_laws(); - - printf ("Local Bus Controller Registers\n" - "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0)); - printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1)); - printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2)); - printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3)); - printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4)); - printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5)); - printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6)); - printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7)); - + print_lbc_regs(); } /* diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c index b4f047d..82c216b 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c @@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR; void cpu_init_f(void) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *memctl = &immap->im_lbc; - /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -61,58 +58,8 @@ void cpu_init_f(void) setup_bats(); - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->or1 = CONFIG_SYS_OR1_REMAP; -#endif - - /* now restrict to preliminary range */ -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - memctl->br0 = CONFIG_SYS_BR0_PRELIM; - memctl->or0 = CONFIG_SYS_OR0_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->or1 = CONFIG_SYS_OR1_PRELIM; - memctl->br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->or2 = CONFIG_SYS_OR2_PRELIM; - memctl->br2 = CONFIG_SYS_BR2_PRELIM; -#endif + init_early_memctl_regs(); -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->or3 = CONFIG_SYS_OR3_PRELIM; - memctl->br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->or4 = CONFIG_SYS_OR4_PRELIM; - memctl->br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->or5 = CONFIG_SYS_OR5_PRELIM; - memctl->br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->or6 = CONFIG_SYS_OR6_PRELIM; - memctl->br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->or7 = CONFIG_SYS_OR7_PRELIM; - memctl->br7 = CONFIG_SYS_BR7_PRELIM; -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index 51f3f4c..ff89ee5 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -55,6 +55,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); if (off < 0) printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); -#endif + ft_fixup_num_cores(blob); +#endif } diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c index 24eb30a..30c99eb 100644 --- a/arch/powerpc/cpu/mpc86xx/mp.c +++ b/arch/powerpc/cpu/mpc86xx/mp.c @@ -66,6 +66,23 @@ int cpu_disable(int nr) return 0; } +int is_core_disabled(int nr) { + immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; + ccsr_gur_t *gur = &immap->im_gur; + u32 devdisr = in_be32(&gur->devdisr); + + switch (nr) { + case 0: + return (devdisr & MPC86xx_DEVDISR_CPU0); + case 1: + return (devdisr & MPC86xx_DEVDISR_CPU1); + default: + printf("Invalid cpu number for disable %d\n", nr); + } + + return 0; +} + int cpu_release(int nr, int argc, char * const argv[]) { /* dummy function so common/cmd_mp.c will build diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index 64a3479..a2d0a8a 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); diff --git a/arch/powerpc/cpu/mpc8xx/bedbug_860.c b/arch/powerpc/cpu/mpc8xx/bedbug_860.c index 9deda6c..83db035 100644 --- a/arch/powerpc/cpu/mpc8xx/bedbug_860.c +++ b/arch/powerpc/cpu/mpc8xx/bedbug_860.c @@ -70,10 +70,7 @@ void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc, /* -------------------------------------------------- */ if (argc < 2) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); /* Turn off a breakpoint */ @@ -121,10 +118,7 @@ void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc, /* Set a breakpoint at the address */ if( !isdigit( argv[ 1 ][ 0 ])) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc; diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index eb0091b..e97ae68 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -149,8 +149,7 @@ void cpu_init_f (volatile immap_t * immr) * I owe him a free beer. - wd] */ -#if defined(CONFIG_GTH) || \ - defined(CONFIG_HERMES) || \ +#if defined(CONFIG_HERMES) || \ defined(CONFIG_ICU862) || \ defined(CONFIG_IP860) || \ defined(CONFIG_IVML24) || \ diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 481f9e5..ea51222 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -1,5 +1,5 @@ # -# Copyright 2009 Freescale Semiconductor, Inc. +# Copyright 2009-2010 Freescale Semiconductor, Inc. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License @@ -10,9 +10,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib8xxx.a +ifneq ($(CPU),mpc83xx) COBJS-y += cpu.o -COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_PCI) += pci_cfg.o +endif + +COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 22f3423..dc3da16 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -80,10 +80,16 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P2010, P2010_E, 1), CPU_TYPE_ENTRY(P2020, P2020, 2), CPU_TYPE_ENTRY(P2020, P2020_E, 2), + CPU_TYPE_ENTRY(P3041, P3041, 4), + CPU_TYPE_ENTRY(P3041, P3041_E, 4), CPU_TYPE_ENTRY(P4040, P4040, 4), CPU_TYPE_ENTRY(P4040, P4040_E, 4), CPU_TYPE_ENTRY(P4080, P4080, 8), CPU_TYPE_ENTRY(P4080, P4080_E, 8), + CPU_TYPE_ENTRY(P5010, P5010, 1), + CPU_TYPE_ENTRY(P5010, P5010_E, 1), + CPU_TYPE_ENTRY(P5020, P5020, 2), + CPU_TYPE_ENTRY(P5020, P5020_E, 2), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index ccefaf5..88c47d1 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -26,6 +26,27 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/mp.h> + +#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) +static int ft_del_cpuhandle(void *blob, int cpuhandle) +{ + int off, ret = -FDT_ERR_NOTFOUND; + + /* if we find a match, we'll delete at it which point the offsets are + * invalid so we start over from the beginning + */ + off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle", + &cpuhandle, 4); + while (off != -FDT_ERR_NOTFOUND) { + fdt_delprop(blob, off, "cpu-handle"); + ret = 1; + off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle", + &cpuhandle, 4); + } + + return ret; +} void ft_fixup_num_cores(void *blob) { int off, num_cores, del_cores; @@ -37,13 +58,18 @@ void ft_fixup_num_cores(void *blob) { while (off != -FDT_ERR_NOTFOUND) { u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - /* if we find a cpu node outside of what we expect delete it - * and reset the offset back to the start since we can't - * trust the offsets anymore - */ - if (*reg > num_cores-1) { - fdt_del_node(blob, off); - del_cores++; + if ((*reg > num_cores-1) || (is_core_disabled(*reg))) { + int ph = fdt_get_phandle(blob, off); + + /* Delete the cpu node once there are no cpu handles */ + if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) { + fdt_del_node(blob, off); + del_cores++; + } + /* either we deleted some cpu handles or the cpu node + * so we reset the offset back to the start since we + * can't trust the offsets anymore + */ off = -1; } off = fdt_node_offset_by_prop_value(blob, off, @@ -53,3 +79,139 @@ void ft_fixup_num_cores(void *blob) { debug ("deleted %d extra core entry entries from device tree\n", del_cores); } +#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ + +#ifdef CONFIG_HAS_FSL_DR_USB +void fdt_fixup_dr_usb(void *blob, bd_t *bd) +{ + char *mode; + char *type; + const char *compat = "fsl-usb2-dr"; + const char *prop_mode = "dr_mode"; + const char *prop_type = "phy_type"; + int node_offset; + int err; + + mode = getenv("usb_dr_mode"); + type = getenv("usb_phy_type"); + if (!mode && !type) + return; + + node_offset = fdt_node_offset_by_compatible(blob, 0, compat); + if (node_offset < 0) { + printf("WARNING: could not find compatible node %s: %s.\n", + compat, fdt_strerror(node_offset)); + return; + } + + if (mode) { + err = fdt_setprop(blob, node_offset, prop_mode, mode, + strlen(mode) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_mode, compat, fdt_strerror(err)); + } + + if (type) { + err = fdt_setprop(blob, node_offset, prop_type, type, + strlen(type) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_type, compat, fdt_strerror(err)); + } +} +#endif /* CONFIG_HAS_FSL_DR_USB */ + +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an E processor + */ +#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list [] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ + { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ + }; + char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + if (!sec_rev) + fdt_del_node_and_alias(blob, "crypto"); +} +#endif diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c new file mode 100644 index 0000000..fcef40c --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -0,0 +1,134 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_lbc.h> + +void print_lbc_regs(void) +{ + int i; + + printf("\nLocal Bus Controller Registers\n"); + for (i = 0; i < 8; i++) { + printf("BR%d\t0x%08X\tOR%d\t0x%08X\n", + i, get_lbc_br(i), i, get_lbc_or(i)); + } +} + +void init_early_memctl_regs(void) +{ + uint init_br1 = 1; + +#ifdef CONFIG_MPC85xx + /* if cs1 is already set via debugger, leave cs0/cs1 alone */ + if (get_lbc_br(1) & BR_V) + init_br1 = 0; +#endif + + /* + * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at + * preliminary addresses - these have to be modified later + * when FLASH size has been determined + */ +#if defined(CONFIG_SYS_OR0_REMAP) + set_lbc_or(0, CONFIG_SYS_OR0_REMAP); +#endif +#if defined(CONFIG_SYS_OR1_REMAP) + set_lbc_or(1, CONFIG_SYS_OR1_REMAP); +#endif + /* now restrict to preliminary range */ + if (init_br1) { + set_lbc_br(0, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR0_PRELIM); + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + set_lbc_or(1, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR1_PRELIM); +#endif + } + +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + set_lbc_or(5, CONFIG_SYS_OR5_PRELIM); + set_lbc_br(5, CONFIG_SYS_BR5_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + set_lbc_or(6, CONFIG_SYS_OR6_PRELIM); + set_lbc_br(6, CONFIG_SYS_BR6_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + set_lbc_or(7, CONFIG_SYS_OR7_PRELIM); + set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); +#endif +} + +/* + * Configures a UPM. The function requires the respective MxMR to be set + * before calling this function. "size" is the number or entries, not a sizeof. + */ +void upmconfig(uint upm, uint *table, uint size) +{ + fsl_lbc_t *lbc = LBC_BASE_ADDR; + int i, mdr, mad, old_mad = 0; + u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK); + u32 msel = BR_UPMx_TO_MSEL(upm); + u32 *mxmr = &lbc->mamr + upm; + volatile u8 *dummy = NULL; + + if (upm < UPMA || upm > UPMC) { + printf("Error: %s() Bad UPM index %d\n", __func__, upm); + hang(); + } + + /* + * Find the address for the dummy write - scan all of the BRs until we + * find one matching the UPM and extract the base address bits from it. + */ + for (i = 0; i < 8; i++) { + if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) { + dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); + break; + } + } + + if (!dummy) { + printf("Error: %s() No matching BR\n", __func__); + hang(); + } + + /* Program UPM using steps outlined by the reference manual */ + for (i = 0; i < size; i++) { + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i); + out_be32(&lbc->mdr, table[i]); + mdr = in_be32(&lbc->mdr); + *dummy = 0; + do { + mad = in_be32(mxmr) & MxMR_MAD_MSK; + } while (mad <= old_mad && !(!mad && i == (size-1))); + old_mad = mad; + } + + /* Return to normal operation */ + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM); +} diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c index 0f69ef9..2fee995 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -767,6 +767,13 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal) debug("\n\n"); +#if defined(CONFIG_DDR_RFDC_FIXED) + mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED); + size = 512; + rffd_average = CONFIG_DDR_RFDC_FIXED & SDRAM_RFDC_RFFD_MASK; + mfsdram(SDRAM_RDCC, rdcc); /* record this value */ + cal->rdcc = rdcc; +#else /* CONFIG_DDR_RFDC_FIXED */ in_window = 0; rdcc = 0; @@ -830,6 +837,7 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal) rffd_average = SDRAM_RFDC_RFFD_MAX; mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); +#endif /* CONFIG_DDR_RFDC_FIXED */ rffd = rffd_average; in_window = 0; @@ -1211,10 +1219,14 @@ u32 DQS_autocalibration(void) debug("*** best_result: read value SDRAM_RQDC 0x%08x\n", rqdc_reg); +#if defined(CONFIG_DDR_RFDC_FIXED) + mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED); +#else /* CONFIG_DDR_RFDC_FIXED */ mfsdram(SDRAM_RFDC, rfdc_reg); rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd)); +#endif /* CONFIG_DDR_RFDC_FIXED */ mfsdram(SDRAM_RFDC, rfdc_reg); debug("*** best_result: read value SDRAM_RFDC 0x%08x\n", diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile index 88d53fb..c9c1a33 100644 --- a/arch/powerpc/cpu/ppc4xx/Makefile +++ b/arch/powerpc/cpu/ppc4xx/Makefile @@ -51,6 +51,9 @@ COBJS += cpu_init.o COBJS += denali_data_eye.o COBJS += denali_spd_ddr2.o COBJS += ecc.o +ifdef CONFIG_CMD_ECCTEST +COBJS += cmd_ecctest.o +endif COBJS += fdt.o COBJS += interrupts.o COBJS += iop480_uart.o diff --git a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c new file mode 100644 index 0000000..b4eac40 --- /dev/null +++ b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c @@ -0,0 +1,284 @@ +/* + * (C) Copyright 2010 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/cache.h> + +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \ + defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) +#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) + +#if defined(CONFIG_405EX) +/* + * Currently only 405EX uses 16bit data bus width as an alternative + * option to 32bit data width (SDRAM0_MCOPT1_WDTH) + */ +#define SDRAM_DATA_ALT_WIDTH 2 +#else +#define SDRAM_DATA_ALT_WIDTH 8 +#endif + +#if defined(CONFIG_SYS_OCM_BASE) +#define CONFIG_FUNC_ISRAM_ADDR CONFIG_SYS_OCM_BASE +#endif + +#if defined(CONFIG_SYS_ISRAM_BASE) +#define CONFIG_FUNC_ISRAM_ADDR CONFIG_SYS_ISRAM_BASE +#endif + +#if !defined(CONFIG_FUNC_ISRAM_ADDR) +#error "No internal SRAM/OCM provided!" +#endif + +#define force_inline inline __attribute__ ((always_inline)) + +static inline void machine_check_disable(void) +{ + mtmsr(mfmsr() & ~MSR_ME); +} + +static inline void machine_check_enable(void) +{ + mtmsr(mfmsr() | MSR_ME); +} + +/* + * These helper functions need to be inlined, since they + * are called from the functions running from internal SRAM. + * SDRAM operation is forbidden at that time, so calling + * functions in SDRAM has to be avoided. + */ +static force_inline void wait_ddr_idle(void) +{ + u32 val; + + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT); +} + +static force_inline void recalibrate_ddr(void) +{ + u32 val; + + /* + * Rewrite RQDC & RFDC to calibrate again. If this is not + * done, the SDRAM controller is working correctly after + * changing the MCOPT1_MCHK bits. + */ + mfsdram(SDRAM_RQDC, val); + mtsdram(SDRAM_RQDC, val); + mfsdram(SDRAM_RFDC, val); + mtsdram(SDRAM_RFDC, val); +} + +static force_inline void set_mcopt1_mchk(u32 bits) +{ + u32 val; + + wait_ddr_idle(); + mfsdram(SDRAM_MCOPT1, val); + mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | bits); + recalibrate_ddr(); +} + +/* + * The next 2 functions are copied to internal SRAM/OCM and run + * there. No function calls allowed here. No SDRAM acitivity should + * be done here. + */ +static void inject_ecc_error(void *ptr, int par) +{ + u32 val; + + /* + * Taken from PPC460EX/EXr/GT users manual (Rev 1.21) + * 22.2.17.13 ECC Diagnostics + * + * Items 1 ... 5 are already done by now, running from RAM + * with ECC enabled + */ + + out_be32(ptr, 0x00000000); + val = in_be32(ptr); + + /* 6. Set memory controller to no error checking */ + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_NON); + + /* 7. Modify one or two bits for error simulation */ + if (par == 1) + out_be32(ptr, in_be32(ptr) ^ 0x00000001); + else + out_be32(ptr, in_be32(ptr) ^ 0x00000003); + + /* 8. Wait for SDRAM idle */ + val = in_be32(ptr); + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP); + + /* Wait for SDRAM idle */ + wait_ddr_idle(); + + /* Continue with 9. in calling function... */ +} + +static void rewrite_ecc_parity(void *ptr, int par) +{ + u32 current_address = (u32)ptr; + u32 end_address; + u32 address_increment; + u32 mcopt1; + u32 val; + + /* + * Fill ECC parity byte again. Otherwise further accesses to + * the failure address will result in exceptions. + */ + + /* Wait for SDRAM idle */ + val = in_be32(0x00000000); + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_GEN); + + /* ECC bit set method for non-cached memory */ + mfsdram(SDRAM_MCOPT1, mcopt1); + if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32) + address_increment = 4; + else + address_increment = SDRAM_DATA_ALT_WIDTH; + end_address = current_address + CONFIG_SYS_CACHELINE_SIZE; + + while (current_address < end_address) { + *((unsigned long *)current_address) = 0; + current_address += address_increment; + } + + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP); + + /* Wait for SDRAM idle */ + wait_ddr_idle(); +} + +static int do_ecctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 old_val; + u32 val; + u32 *ptr; + void (*sram_func)(u32 *, int); + int error; + + if (argc < 3) { + cmd_usage(cmdtp); + return 1; + } + + ptr = (u32 *)simple_strtoul(argv[1], NULL, 16); + error = simple_strtoul(argv[2], NULL, 16); + if ((error < 1) || (error > 2)) { + cmd_usage(cmdtp); + return 1; + } + + printf("Using address %p for %d bit ECC error injection\n", + ptr, error); + + /* + * Save value to restore it later on + */ + old_val = in_be32(ptr); + + /* + * Copy ECC injection function into internal SRAM/OCM + */ + sram_func = (void *)CONFIG_FUNC_ISRAM_ADDR; + memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, inject_ecc_error, 0x10000); + + /* + * Disable interrupts and exceptions before calling this + * function in internal SRAM/OCM + */ + disable_interrupts(); + machine_check_disable(); + eieio(); + + /* + * Jump to ECC simulation function in internal SRAM/OCM + */ + (*sram_func)(ptr, error); + + /* 10. Read the corresponding address */ + val = in_be32(ptr); + + /* + * Read and print ECC status register/info: + * The faulting address is only known upon uncorrectable ECC + * errors. + */ + mfsdram(SDRAM_ECCES, val); + if (val & SDRAM_ECCES_CE) + printf("ECC: Correctable error\n"); + if (val & SDRAM_ECCES_UE) { + printf("ECC: Uncorrectable error at 0x%02x%08x\n", + mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL)); + } + + /* + * Clear pending interrupts/exceptions + */ + mtsdram(SDRAM_ECCES, 0xffffffff); + mtdcr(SDRAM_ERRSTATLL, 0xff000000); + set_mcsr(get_mcsr()); + + /* Now enable interrupts and exceptions again */ + eieio(); + machine_check_enable(); + enable_interrupts(); + + /* + * The ECC parity byte need to be re-written for the + * corresponding address. Otherwise future accesses to it + * will result in exceptions. + * + * Jump to ECC parity generation function + */ + memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, rewrite_ecc_parity, 0x10000); + (*sram_func)(ptr, 0); + + /* + * Restore value in corresponding address + */ + out_be32(ptr, old_val); + + return 0; +} + +U_BOOT_CMD( + ecctest, 3, 0, do_ecctest, + "Test ECC by single and double error bit injection", + "address 1/2" +); + +#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */ +#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */ diff --git a/arch/powerpc/cpu/ppc4xx/ecc.c b/arch/powerpc/cpu/ppc4xx/ecc.c index f105605..49f28d9 100644 --- a/arch/powerpc/cpu/ppc4xx/ecc.c +++ b/arch/powerpc/cpu/ppc4xx/ecc.c @@ -130,7 +130,26 @@ static void program_ecc_addr(unsigned long start_address, /* clear ECC error repoting registers */ mtsdram(SDRAM_ECCES, 0xffffffff); - mtdcr(0x4c, 0xffffffff); +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) + /* + * IBM DDR(1) core (440GX): + * Clear Mx bits in SDRAM0_BESR0/1 + */ + mtsdram(SDRAM0_BESR0, 0xffffffff); + mtsdram(SDRAM0_BESR1, 0xffffffff); +#elif defined(CONFIG_440) + /* + * 440/460 DDR2 core: + * Clear EMID (Error PLB Master ID) in MQ0_ESL + */ + mtdcr(SDRAM_ERRSTATLL, 0xfff00000); +#else + /* + * 405EX(r) DDR2 core: + * Clear M0ID (Error PLB Master ID) in SDRAM_BESR + */ + mtsdram(SDRAM_BESR, 0xf0000000); +#endif mtsdram(SDRAM_MCOPT1, (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP); diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c index 1616772..b5562ad 100644 --- a/arch/powerpc/cpu/ppc4xx/traps.c +++ b/arch/powerpc/cpu/ppc4xx/traps.c @@ -209,6 +209,22 @@ MachineCheckException(struct pt_regs *regs) /* Clear MCSR */ mtspr(SPRN_MCSR, val); } + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) + /* + * Read and print ECC status register/info: + * The faulting address is only known upon uncorrectable ECC + * errors. + */ + mfsdram(SDRAM_ECCES, val); + if (val & SDRAM_ECCES_CE) + printf("ECC: Correctable error\n"); + if (val & SDRAM_ECCES_UE) { + printf("ECC: Uncorrectable error at 0x%02x%08x\n", + mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL)); + } +#endif /* CONFIG_DDR_ECC ... */ + #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) mfsdram(DDR0_00, val) ; printf("DDR0: DDR0_00 %lx\n", val); diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index fc3facb..f70699d 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -44,8 +44,12 @@ defined(CONFIG_P1021) || defined(CONFIG_P1022) || \ defined(CONFIG_P2020) || defined(CONFIG_MPC8641) #define CONFIG_MAX_CPUS 2 +#elif defined(CONFIG_PPC_P3041) +#define CONFIG_MAX_CPUS 4 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 +#elif defined(CONFIG_PPC_P5020) +#define CONFIG_MAX_CPUS 2 #else #define CONFIG_MAX_CPUS 1 #endif @@ -66,6 +70,15 @@ #define CONFIG_TSECV2 #endif +/* + * SEC (crypto unit) major compatible version determination + */ +#if defined(CONFIG_FSL_CORENET) +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx) +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#endif + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -76,4 +89,10 @@ /* Relocation to SDRAM works on all PPC boards */ #define CONFIG_RELOC_FIXUP_WORKS +/* Since so many PPC SOCs have a semi-common LBC, define this here */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ + defined(CONFIG_MPC83xx) +#define CONFIG_FSL_LBC +#endif + #endif /* _ASM_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 34c56a2..12ba1a6 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -47,6 +47,7 @@ enum law_size { }; #define law_size_bits(sz) (__ilog2_u64(sz) - 1) +#define lawar_size(x) (1ULL << ((x & 0x3f) + 1)) #ifdef CONFIG_FSL_CORENET enum law_trgt_if { diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 03ae6a7..82d24ab 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -14,6 +14,7 @@ #define __ASM_PPC_FSL_LBC_H #include <config.h> +#include <common.h> /* BR - Base Registers */ @@ -61,6 +62,8 @@ #define BR_V 0x00000001 #define BR_V_SHIFT 0 +#define BR_UPMx_TO_MSEL(x) ((x + 4) << BR_MSEL_SHIFT) + #define UPMA 0 #define UPMB 1 #define UPMC 2 @@ -453,49 +456,70 @@ #define LTESR_CC 0x00000001 #ifndef __ASSEMBLY__ -/* - * Local Bus Controller Registers. - */ -typedef struct lbus_bank { - u32 br; /* Base Register */ - u32 or; /* Option Register */ -} lbus_bank_t; - -typedef struct fsl_lbus { - lbus_bank_t bank[8]; - u8 res0[0x28]; - u32 mar; /* UPM Address Register */ - u8 res1[0x4]; - u32 mamr; /* UPMA Mode Register */ - u32 mbmr; /* UPMB Mode Register */ - u32 mcmr; /* UPMC Mode Register */ - u8 res2[0x8]; - u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ - u32 mdr; /* UPM Data Register */ - u8 res3[0x4]; - u32 lsor; /* Special Operation Initiation Register */ - u32 lsdmr; /* SDRAM Mode Register */ - u8 res4[0x8]; - u32 lurt; /* UPM Refresh Timer */ - u32 lsrt; /* SDRAM Refresh Timer */ - u8 res5[0x8]; - u32 ltesr; /* Transfer Error Status Register */ - u32 ltedr; /* Transfer Error Disable Register */ - u32 lteir; /* Transfer Error Interrupt Register */ - u32 lteatr; /* Transfer Error Attributes Register */ - u32 ltear; /* Transfer Error Address Register */ - u8 res6[0xC]; - u32 lbcr; /* Configuration Register */ - u32 lcrr; /* Clock Ratio Register */ - u8 res7[0x8]; - u32 fmr; /* Flash Mode Register */ - u32 fir; /* Flash Instruction Register */ - u32 fcr; /* Flash Command Register */ - u32 fbar; /* Flash Block Addr Register */ - u32 fpar; /* Flash Page Addr Register */ - u32 fbcr; /* Flash Byte Count Register */ - u8 res8[0xF08]; -} fsl_lbus_t; -#endif /* __ASSEMBLY__ */ +#include <asm/io.h> + +extern void print_lbc_regs(void); +extern void init_early_memctl_regs(void); +extern void upmconfig(uint upm, uint *table, uint size); + +#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR) +#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br)) +#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or)) +#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v)) +#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v)) + +typedef struct lbc_bank { + u32 br; + u32 or; +} lbc_bank_t; +/* Local Bus Controller Registers */ +typedef struct fsl_lbc { + lbc_bank_t bank[8]; + u8 res1[40]; + u32 mar; /* LBC UPM Addr */ + u8 res2[4]; + u32 mamr; /* LBC UPMA Mode */ + u32 mbmr; /* LBC UPMB Mode */ + u32 mcmr; /* LBC UPMC Mode */ + u8 res3[8]; + u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ + u32 mdr; /* LBC UPM Data */ +#ifdef CONFIG_FSL_ELBC + u8 res4[4]; + u32 lsor; + u8 res5[12]; + u32 lurt; /* LBC UPM Refresh Timer */ + u8 res6[4]; +#else + u8 res4[8]; + u32 lsdmr; /* LBC SDRAM Mode */ + u8 res5[8]; + u32 lurt; /* LBC UPM Refresh Timer */ + u32 lsrt; /* LBC SDRAM Refresh Timer */ +#endif + u8 res7[8]; + u32 ltesr; /* LBC Transfer Error Status */ + u32 ltedr; /* LBC Transfer Error Disable */ + u32 lteir; /* LBC Transfer Error IRQ */ + u32 lteatr; /* LBC Transfer Error Attrs */ + u32 ltear; /* LBC Transfer Error Addr */ + u8 res8[12]; + u32 lbcr; /* LBC Configuration */ + u32 lcrr; /* LBC Clock Ratio */ +#ifdef CONFIG_NAND_FSL_ELBC + u8 res9[0x8]; + u32 fmr; /* Flash Mode Register */ + u32 fir; /* Flash Instruction Register */ + u32 fcr; /* Flash Command Register */ + u32 fbar; /* Flash Block Addr Register */ + u32 fpar; /* Flash Page Addr Register */ + u32 fbcr; /* Flash Byte Count Register */ + u8 res10[0xF08]; +#else + u8 res9[0xF28]; +#endif +} fsl_lbc_t; + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_PPC_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index db61e7e..dc5c579 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -29,8 +29,8 @@ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data); void fsl_pci_config_unlock(struct pci_controller *hose); -void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); +void ft_fsl_pci_setup(void *blob, const char *pci_compat, + struct pci_controller *hose, unsigned long ctrl_addr); /* * Common PCI/PCIE Register structure for mpc85xx and mpc86xx @@ -162,14 +162,15 @@ typedef struct ccsr_pci { } ccsr_fsl_pci_t; struct fsl_pci_info { - unsigned long regs; - pci_addr_t mem_bus; - phys_size_t mem_phys; - pci_size_t mem_size; - pci_addr_t io_bus; - phys_size_t io_phys; - pci_size_t io_size; - int pci_num; + unsigned long regs; + pci_addr_t mem_bus; + phys_size_t mem_phys; + pci_size_t mem_size; + pci_addr_t io_bus; + phys_size_t io_phys; + pci_size_t io_size; + enum law_trgt_if law; + int pci_num; }; int fsl_pci_init_port(struct fsl_pci_info *pci_info, @@ -184,6 +185,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \ x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \ x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \ + x.law = LAW_TRGT_IF_PCI_##num; \ x.pci_num = num; \ } @@ -196,7 +198,86 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \ x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \ x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \ + x.law = LAW_TRGT_IF_PCIE_##num; \ x.pci_num = num; \ } +#define __FT_FSL_PCI_SETUP(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, &pci##num##_hose, \ + CONFIG_SYS_PCI##num##_ADDR) + +#define __FT_FSL_PCI_DEL(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCI##num##_ADDR) + +#define __FT_FSL_PCIE_SETUP(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, &pcie##num##_hose, \ + CONFIG_SYS_PCIE##num##_ADDR) + +#define __FT_FSL_PCIE_DEL(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCIE##num##_ADDR) + +#ifdef CONFIG_PCI1 +#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 1) +#else +#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 1) +#endif + +#ifdef CONFIG_PCI2 +#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 2) +#else +#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 2) +#endif + +#ifdef CONFIG_PCIE1 +#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 1) +#else +#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 1) +#endif + +#ifdef CONFIG_PCIE2 +#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 2) +#else +#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 2) +#endif + +#ifdef CONFIG_PCIE3 +#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3) +#else +#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 3) +#endif + +#ifdef CONFIG_PCIE4 +#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4) +#else +#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 4) +#endif + +#if defined(CONFIG_FSL_CORENET) +#define FSL_PCIE_COMPAT "fsl,p4080-pcie" +#define FT_FSL_PCI_SETUP \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; \ + FT_FSL_PCIE3_SETUP; \ + FT_FSL_PCIE4_SETUP; +#elif defined(CONFIG_MPC85xx) +#define FSL_PCI_COMPAT "fsl,mpc8540-pci" +#define FSL_PCIE_COMPAT "fsl,mpc8548-pcie" +#define FT_FSL_PCI_SETUP \ + FT_FSL_PCI1_SETUP; \ + FT_FSL_PCI2_SETUP; \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; \ + FT_FSL_PCIE3_SETUP; +#elif defined(CONFIG_MPC86xx) +#define FSL_PCI_COMPAT "fsl,mpc8610-pci" +#define FSL_PCIE_COMPAT "fsl,mpc8641-pcie" +#define FT_FSL_PCI_SETUP \ + FT_FSL_PCI1_SETUP; \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; +#else +#error FT_FSL_PCI_SETUP not defined +#endif + + #endif diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index d4839f4..c7877b9 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -44,5 +44,6 @@ enum srds_prtcl { }; int is_serdes_configured(enum srds_prtcl device); +void fsl_serdes_init(void); #endif /* __FSL_SERDES_H */ diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index d3dd44e..c854ce9 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -60,7 +60,8 @@ typedef struct global_data { #if defined(CONFIG_MPC83xx) /* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; @@ -76,7 +77,8 @@ typedef struct global_data { u32 lbiu_clk; u32 lclk_clk; u32 pci_clk; -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) u32 pciexp1_clk; u32 pciexp2_clk; #endif diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 6b42a73..cc0293a 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -73,7 +73,11 @@ typedef struct sysconf83xx { u32 obir; /* Output Buffer Impedance Register */ u8 res8[0xC]; u32 pecr1; /* PCI Express control register 1 */ +#ifdef CONFIG_MPC8308 + u32 sdhccr; /* eSDHC Control Registers for MPC8308 */ +#else u32 pecr2; /* PCI Express control register 2 */ +#endif u8 res9[0xB8]; } sysconf83xx_t; @@ -589,7 +593,14 @@ typedef struct sdhc83xx { * SerDes */ typedef struct serdes83xx { - u8 fixme[0x100]; + u32 srdscr0; + u32 srdscr1; + u32 srdscr2; + u32 srdscr3; + u32 srdscr4; + u8 res0[0xc]; + u32 srdsrstctl; + u8 res1[0xdc]; } serdes83xx_t; /* @@ -635,7 +646,7 @@ typedef struct immap { u8 res2[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res3[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res4[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -675,7 +686,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -691,7 +702,7 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; -#elif defined(CONFIG_MPC8315) +#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -710,7 +721,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -755,7 +766,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -805,7 +816,7 @@ typedef struct immap { u8 res4[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res5[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res6[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -844,7 +855,7 @@ typedef struct immap { u8 res3[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res4[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res5[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -868,6 +879,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC83xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET) +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 5b205d1..b1d219b 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -266,50 +266,6 @@ typedef struct ccsr_duart { } ccsr_duart_t; #endif -/* Local Bus Controller Registers */ -typedef struct ccsr_lbc { - u32 br0; /* LBC Base 0 */ - u32 or0; /* LBC Options 0 */ - u32 br1; /* LBC Base 1 */ - u32 or1; /* LBC Options 1 */ - u32 br2; /* LBC Base 2 */ - u32 or2; /* LBC Options 2 */ - u32 br3; /* LBC Base 3 */ - u32 or3; /* LBC Options 3 */ - u32 br4; /* LBC Base 4 */ - u32 or4; /* LBC Options 4 */ - u32 br5; /* LBC Base 5 */ - u32 or5; /* LBC Options 5 */ - u32 br6; /* LBC Base 6 */ - u32 or6; /* LBC Options 6 */ - u32 br7; /* LBC Base 7 */ - u32 or7; /* LBC Options 7 */ - u8 res1[40]; - u32 mar; /* LBC UPM Addr */ - u8 res2[4]; - u32 mamr; /* LBC UPMA Mode */ - u32 mbmr; /* LBC UPMB Mode */ - u32 mcmr; /* LBC UPMC Mode */ - u8 res3[8]; - u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ - u32 mdr; /* LBC UPM Data */ - u8 res4[8]; - u32 lsdmr; /* LBC SDRAM Mode */ - u8 res5[8]; - u32 lurt; /* LBC UPM Refresh Timer */ - u32 lsrt; /* LBC SDRAM Refresh Timer */ - u8 res6[8]; - u32 ltesr; /* LBC Transfer Error Status */ - u32 ltedr; /* LBC Transfer Error Disable */ - u32 lteir; /* LBC Transfer Error IRQ */ - u32 lteatr; /* LBC Transfer Error Attrs */ - u32 ltear; /* LBC Transfer Error Addr */ - u8 res7[12]; - u32 lbcr; /* LBC Configuration */ - u32 lcrr; /* LBC Clock Ratio */ - u8 res8[3880]; -} ccsr_lbc_t; - /* eSPI Registers */ typedef struct ccsr_espi { u32 mode; /* eSPI mode */ @@ -2045,6 +2001,41 @@ enum { FSL_SRDS_B3_LANE_D = 23, }; +/* Security Engine Block (MS = Most Sig., LS = Least Sig.) */ +#if CONFIG_SYS_FSL_SEC_COMPAT >= 4 +typedef struct ccsr_sec { + u8 res1[0xfa0]; + u32 crnr_ms; /* CHA Revision Number Register, MS */ + u32 crnr_ls; /* CHA Revision Number Register, LS */ + u32 ctpr_ms; /* Compile Time Parameters Register, MS */ +#define SEC_CTPR_MS_AXI_LIODN 0x08000000 +#define SEC_CTPR_MS_QI 0x02000000 + u32 ctpr_ls; /* Compile Time Parameters Register, LS */ + u8 res2[0x10]; + u32 far_ms; /* Fault Address Register, MS */ + u32 far_ls; /* Fault Address Register, LS */ + u32 falr; /* Fault Address LIODN Register */ + u32 fadr; /* Fault Address Detail Register */ + u8 res3[0x4]; + u32 csta; /* CAAM Status Register */ + u8 res4[0x8]; + u32 rvid; /* Run Time Integrity Checking Version ID Reg.*/ +#define SEC_RVID_MA 0x0f000000 + u32 ccbvid; /* CHA Cluster Block Version ID Register */ + u32 chavid_ms; /* CHA Version ID Register, MS */ + u32 chavid_ls; /* CHA Version ID Register, LS */ + u32 chanum_ms; /* CHA Number Register, MS */ +#define SEC_CHANUM_MS_JQNUM_MASK 0xf0000000 +#define SEC_CHANUM_MS_JQNUM_SHIFT 28 +#define SEC_CHANUM_MS_DECONUM_MASK 0x0f000000 +#define SEC_CHANUM_MS_DECONUM_SHIFT 24 + u32 chanum_ls; /* CHA Number Register, LS */ + u32 caamvid_ms; /* CAAM Version ID Register, MS */ + u32 caamvid_ls; /* CAAM Version ID Register, LS */ + u8 res5[0xf000]; +} ccsr_sec_t; +#endif + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 @@ -2059,6 +2050,7 @@ enum { #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000 +#define CONFIG_SYS_FSL_SEC_OFFSET 0x300000 #define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000 #define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000 #define CONFIG_SYS_TSEC1_OFFSET 0x4e0000 /* FM1@DTSEC0 */ @@ -2068,8 +2060,17 @@ enum { #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000 +#define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000 +#define CONFIG_SYS_MPC85xx_PCI2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0xa000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x9000 +#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020) +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x8000 +#else +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0xb000 +#endif #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000 @@ -2111,7 +2112,7 @@ enum { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET) #define CONFIG_SYS_MPC85xx_DDR2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) -#define CONFIG_SYS_MPC85xx_LBC_ADDR \ +#define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) #define CONFIG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) @@ -2143,6 +2144,19 @@ enum { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) +#define CONFIG_SYS_FSL_SEC_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) + +#define CONFIG_SYS_PCI1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET) +#define CONFIG_SYS_PCI2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI2_OFFSET) +#define CONFIG_SYS_PCIE1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE1_OFFSET) +#define CONFIG_SYS_PCIE2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET) +#define CONFIG_SYS_PCIE3_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index fd7acdb..4bebb68 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -12,6 +12,7 @@ #include <asm/types.h> #include <asm/fsl_dma.h> +#include <asm/fsl_lbc.h> #include <asm/fsl_i2c.h> /* Local-Access Registers and MCM Registers(0x0000-0x2000) */ @@ -190,51 +191,6 @@ typedef struct ccsr_duart { char res5[2543]; } ccsr_duart_t; - -/* Local Bus Controller Registers(0x5000-0x6000) */ -typedef struct ccsr_lbc { - uint br0; /* 0x5000 - LBC Base Register 0 */ - uint or0; /* 0x5004 - LBC Options Register 0 */ - uint br1; /* 0x5008 - LBC Base Register 1 */ - uint or1; /* 0x500c - LBC Options Register 1 */ - uint br2; /* 0x5010 - LBC Base Register 2 */ - uint or2; /* 0x5014 - LBC Options Register 2 */ - uint br3; /* 0x5018 - LBC Base Register 3 */ - uint or3; /* 0x501c - LBC Options Register 3 */ - uint br4; /* 0x5020 - LBC Base Register 4 */ - uint or4; /* 0x5024 - LBC Options Register 4 */ - uint br5; /* 0x5028 - LBC Base Register 5 */ - uint or5; /* 0x502c - LBC Options Register 5 */ - uint br6; /* 0x5030 - LBC Base Register 6 */ - uint or6; /* 0x5034 - LBC Options Register 6 */ - uint br7; /* 0x5038 - LBC Base Register 7 */ - uint or7; /* 0x503c - LBC Options Register 7 */ - char res1[40]; - uint mar; /* 0x5068 - LBC UPM Address Register */ - char res2[4]; - uint mamr; /* 0x5070 - LBC UPMA Mode Register */ - uint mbmr; /* 0x5074 - LBC UPMB Mode Register */ - uint mcmr; /* 0x5078 - LBC UPMC Mode Register */ - char res3[8]; - uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */ - uint mdr; /* 0x5088 - LBC UPM Data Register */ - char res4[8]; - uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */ - char res5[8]; - uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */ - uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */ - char res6[8]; - uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */ - uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */ - uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */ - uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */ - uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */ - char res7[12]; - uint lbcr; /* 0x50d0 - LBC Configuration Register */ - uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */ - char res8[3880]; -} ccsr_lbc_t; - /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */ typedef struct ccsr_pex { uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */ @@ -1270,7 +1226,7 @@ typedef struct immap { ccsr_ddr_t im_ddr1; ccsr_i2c_t im_i2c; ccsr_duart_t im_duart; - ccsr_lbc_t im_lbc; + fsl_lbc_t im_lbc; ccsr_ddr_t im_ddr2; char res1[4096]; ccsr_pex_t im_pex1; @@ -1301,8 +1257,26 @@ extern immap_t *immr; #define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000) #define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET) +#define CONFIG_SYS_MPC86xx_PCI1_OFFSET 0x8000 +#ifdef CONFIG_MPC8610 +#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET 0xa000 +#else +#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET 0x8000 +#endif +#define CONFIG_SYS_MPC86xx_PCIE2_OFFSET 0x9000 + +#define CONFIG_SYS_PCI1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI1_OFFSET) +#define CONFIG_SYS_PCI2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI2_OFFSET) +#define CONFIG_SYS_PCIE1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE1_OFFSET) +#define CONFIG_SYS_PCIE2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE2_OFFSET) + #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 5166507..c01c85f 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -402,6 +402,7 @@ extern void print_bats(void); #define MAS1_TID(x) ((x << 16) & 0x3FFF0000) #define MAS1_TS 0x00001000 #define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) +#define TSIZE_TO_BYTES(x) ((phys_addr_t)(1UL << ((tsize * 2) + 10))) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 @@ -485,6 +486,7 @@ extern void init_tlbs(void); extern int find_tlb_idx(void *addr, u8 tlbsel); extern void init_used_tlb_cams(void); extern int find_free_tlbcam(void); +extern void print_tlbcam(void); extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg); diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h index 5388c95..3ffa30b 100644 --- a/arch/powerpc/include/asm/mp.h +++ b/arch/powerpc/include/asm/mp.h @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -26,5 +26,6 @@ void setup_mp(void); void cpu_mp_lmb_reserve(struct lmb *lmb); u32 determine_mp_bootpg(void); +int is_core_disabled(int nr); #endif diff --git a/arch/powerpc/include/asm/mpc8xxx_spi.h b/arch/powerpc/include/asm/mpc8xxx_spi.h index 41737d3..b0082af 100644 --- a/arch/powerpc/include/asm/mpc8xxx_spi.h +++ b/arch/powerpc/include/asm/mpc8xxx_spi.h @@ -27,9 +27,10 @@ #include <asm/types.h> -#if defined(CONFIG_MPC834x) || \ +#if defined(CONFIG_MPC8308) || \ defined(CONFIG_MPC8313) || \ defined(CONFIG_MPC8315) || \ + defined(CONFIG_MPC834x) || \ defined(CONFIG_MPC837x) typedef struct spi8xxx { diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h index d9506e2..4ec1ef8 100644 --- a/arch/powerpc/include/asm/ppc4xx-sdram.h +++ b/arch/powerpc/include/asm/ppc4xx-sdram.h @@ -63,6 +63,8 @@ #define SDRAM_CFG0 0x20 /* memory controller options 0 */ #define SDRAM_CFG1 0x21 /* memory controller options 1 */ +#define SDRAM0_BESR0 0x0000 /* bus error status reg 0 */ +#define SDRAM0_BESR1 0x0008 /* bus error status reg 1 */ #define SDRAM0_BEAR 0x0010 /* bus error address reg */ #define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */ #define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */ @@ -363,6 +365,7 @@ /* * Memory controller registers */ +#ifdef CONFIG_405EX #define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */ #define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */ #define SDRAM_BEARL 0x02 /* PLB bus error address low */ @@ -371,11 +374,10 @@ #define SDRAM_WMIRQT 0x07 /* PLB write master interrupt (test/set) */ #define SDRAM_PLBOPT 0x08 /* PLB slave options */ #define SDRAM_PUABA 0x09 /* PLB upper address base */ -#ifndef CONFIG_405EX -#define SDRAM_MCSTAT 0x14 /* memory controller status */ -#else #define SDRAM_MCSTAT 0x1F /* memory controller status */ -#endif +#else /* CONFIG_405EX */ +#define SDRAM_MCSTAT 0x14 /* memory controller status */ +#endif /* CONFIG_405EX */ #define SDRAM_MCOPT1 0x20 /* memory controller options 1 */ #define SDRAM_MCOPT2 0x21 /* memory controller options 2 */ #define SDRAM_MODT0 0x22 /* on die termination for bank 0 */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 9ec319a..89f283a 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -534,9 +534,11 @@ #define SPRN_MCSRR0 0x23a /* Machine Check Save and Restore Register 0 */ #define SPRN_MCSRR1 0x23b /* Machine Check Save and Restore Register 1 */ #define SPRN_BUCSR 0x3f5 /* Branch Control and Status Register */ +#define BUCSR_STAC_EN 0x01000000 /* Segment target addr cache enable */ +#define BUCSR_LS_EN 0x00400000 /* Link stack enable */ #define BUCSR_BBFI 0x00000200 /* Branch buffer flash invalidate */ #define BUCSR_BPEN 0x00000001 /* Branch prediction enable */ -#define BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN) +#define BUCSR_ENABLE (BUCSR_STAC_EN|BUCSR_LS_EN|BUCSR_BBFI|BUCSR_BPEN) #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ #define SPRN_PID1 0x279 /* Process ID Register 1 */ @@ -1050,10 +1052,16 @@ #define SVR_P2010_E 0x80EB00 #define SVR_P2020 0x80E200 #define SVR_P2020_E 0x80EA00 +#define SVR_P3041 0x821103 +#define SVR_P3041_E 0x821903 #define SVR_P4040 0x820100 #define SVR_P4040_E 0x820900 #define SVR_P4080 0x820000 #define SVR_P4080_E 0x820800 +#define SVR_P5010 0x822100 +#define SVR_P5010_E 0x822900 +#define SVR_P5020 0x822000 +#define SVR_P5020_E 0x822800 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index 54c0ffe..bb388ed 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -27,6 +27,7 @@ #include <common.h> #include <miiphy.h> #include <asm/arch/orion5x.h> +#include "edminiv2.h" DECLARE_GLOBAL_DATA_PTR; @@ -90,3 +91,38 @@ int board_init(void) return 0; } + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +/* Configure and enable MV88E1116 PHY */ +void reset_phy(void) +{ + u16 reg; + u16 devadr; + char *name = "egiga0"; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..%s could not read PHY dev address\n", + __func__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); + reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("88E1116 Initialized on %s\n", name); +} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/LaCie/edminiv2/edminiv2.h b/board/LaCie/edminiv2/edminiv2.h new file mode 100644 index 0000000..88e62b2 --- /dev/null +++ b/board/LaCie/edminiv2/edminiv2.h @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2009 + * Net Insight <www.netinsight.net> + * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + * + * Based on sheevaplug.h: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __EDMINIV2_BASE_H +#define __EDMINIV2_BASE_H + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __EDMINIV2_BASE_H */ diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index 4652672..3c37557 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -167,13 +167,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/altera/nios2-generic/custom_fpga.h b/board/altera/nios2-generic/custom_fpga.h index 761f605..a11add5 100644 --- a/board/altera/nios2-generic/custom_fpga.h +++ b/board/altera/nios2-generic/custom_fpga.h @@ -35,6 +35,16 @@ #define CONFIG_SMC91111 #define CONFIG_SMC_USE_32_BIT +/* epcs_controller.epcs_control_port is a altera_avalon_epcs_flash_controller */ +#define EPCS_CONTROLLER_REG_BASE 0x82100200 +#define CONFIG_SYS_ALTERA_SPI_LIST { EPCS_CONTROLLER_REG_BASE } +#define CONFIG_ALTERA_SPI +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + /* jtag_uart.avalon_jtag_slave is a altera_avalon_jtag_uart */ #define CONFIG_SYS_JTAG_UART_BASE 0x821208b0 diff --git a/board/altera/nios2-generic/gpio.c b/board/altera/nios2-generic/gpio.c index 6c9c6c2..d449684 100644 --- a/board/altera/nios2-generic/gpio.c +++ b/board/altera/nios2-generic/gpio.c @@ -15,6 +15,11 @@ static u32 pio_data_reg; static u32 pio_dir_reg; +int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + int gpio_direction_input(unsigned gpio) { u32 mask = 1 << gpio; diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c index 86f86e2..6936e51 100644 --- a/board/amcc/acadia/cmd_acadia.c +++ b/board/amcc/acadia/cmd_acadia.c @@ -44,10 +44,8 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ u8 *buf; int cpu_freq; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); cpu_freq = simple_strtol(argv[1], NULL, 10); if (cpu_freq != 267) { diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 23874d2..158f7bb 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -34,7 +34,17 @@ extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH ch DECLARE_GLOBAL_DATA_PTR; -#define CONFIG_SYS_BCSR3_PCIE 0x10 + struct board_bcsr { + u8 board_id; + u8 cpld_rev; + u8 led_user; + u8 board_status; + u8 reset_ctrl; + u8 flash_ctrl; + u8 eth_ctrl; + u8 usb_ctrl; + u8 irq_ctrl; +}; #define BOARD_CANYONLANDS_PCIE 1 #define BOARD_CANYONLANDS_SATA 2 @@ -112,6 +122,9 @@ int board_early_init_f(void) { #if !defined(CONFIG_ARCHES) u32 sdr0_cust0; + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; + #endif /* @@ -172,14 +185,10 @@ int board_early_init_f(void) #if !defined(CONFIG_ARCHES) /* Enable ethernet and take out of reset */ - out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0); + out_8(&bcsr_data->eth_ctrl, 0) ; /* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */ - out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0); - - /* Enable USB host & USB-OTG */ - out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0); - + out_8(&bcsr_data->flash_ctrl, 0) ; mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */ /* Setup PLB4-AHB bridge based on the system address map */ @@ -201,6 +210,41 @@ int board_early_init_f(void) return 0; } +#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) +int usb_board_init(void) +{ + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; + u8 val; + + /* Enable USB host & USB-OTG */ + val = in_8(&bcsr_data->usb_ctrl); + val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); + out_8(&bcsr_data->usb_ctrl, val); + + return 0; +} + +int usb_board_stop(void) +{ + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; + u8 val; + + /* Disable USB host & USB-OTG */ + val = in_8(&bcsr_data->usb_ctrl); + val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); + out_8(&bcsr_data->usb_ctrl, val); + + return 0; +} + +int usb_board_init_fail(void) +{ + return usb_board_stop(); +} +#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */ + #if !defined(CONFIG_ARCHES) static void canyonlands_sata_init(int board_type) { @@ -244,11 +288,13 @@ int get_cpu_num(void) #if !defined(CONFIG_ARCHES) int checkboard(void) { + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; char *s = getenv("serial#"); if (pvr_460ex()) { printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board"); - if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE) + if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE) gd->board_type = BOARD_CANYONLANDS_PCIE; else gd->board_type = BOARD_CANYONLANDS_SATA; @@ -268,7 +314,7 @@ int checkboard(void) break; } - printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0))); + printf(", Rev. %X", in_8(&bcsr_data->cpld_rev)); if (s != NULL) { puts(", serial# "); diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index c0368c0..c09d730 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -223,8 +223,7 @@ int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) l2cache_status() ? "ON" : "OFF"); return 0; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c index 3c0dc5f..7f75ad7 100644 --- a/board/amcc/makalu/cmd_pll.c +++ b/board/amcc/makalu/cmd_pll.c @@ -182,14 +182,14 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char c = '\0'; pll_freq_t pll_freq; - if (argc < 2) { - cmd_usage(cmdtp); - goto ret; - } - for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) + if (argc < 2) + return cmd_usage(cmdtp); + + for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) { if (!strcmp(pll_name[pll_freq], argv[1])) break; + } switch (pll_freq) { case PLL_ebc20: @@ -223,8 +223,7 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: printf("Invalid options\n\n"); - cmd_usage(cmdtp); - goto ret; + return cmd_usage(cmdtp); } printf("PLL set to %s, " diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c index 595dee3..9b2afda 100644 --- a/board/amcc/taihu/lcd.c +++ b/board/amcc/taihu/lcd.c @@ -139,10 +139,9 @@ static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char * const arg static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_puts(argv[1]); return 0; @@ -150,10 +149,9 @@ static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_putc((char)argv[1][0]); return 0; @@ -165,10 +163,8 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[ ulong dir; char cur_addr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); count = simple_strtoul(argv[1], NULL, 16); if (count > 31) { diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 1682cf7..dd2aba5 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -101,16 +101,12 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[ { int led_no; - if (argc != 3) { - cmd_usage(cmd_tp); - return -1; - } + if (argc != 3) + return cmd_usage(cmd_tp); led_no = simple_strtoul(argv[1], NULL, 16); - if (led_no != 1 && led_no != 2) { - cmd_usage(cmd_tp); - return -1; - } + if (led_no != 1 && led_no != 2) + return cmd_usage(cmd_tp); if (strcmp(argv[2],"off") == 0x0) { if (led_no == 1) @@ -123,8 +119,7 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[ else gpio_write_bit(31, 0); } else { - cmd_usage(cmd_tp); - return -1; + return cmd_usage(cmd_tp); } return 0; diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c index 6a049df..7f7730a 100644 --- a/board/amcc/taishan/lcd.c +++ b/board/amcc/taishan/lcd.c @@ -166,19 +166,17 @@ static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv } static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_puts(argv[1]); return 0; } static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_putc((char)argv[1][0]); return 0; } @@ -188,10 +186,8 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[] ulong dir; char cur_addr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); count = simple_strtoul(argv[1], NULL, 16); if (count > 31) { diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index cde13e4..e9cd333 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -58,10 +58,8 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, char plbClock[4]; char pcixClock[4]; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strcmp(argv[2], "prom0") == 0) chip = IIC0_BOOTPROM_ADDR; diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 258d1ea..2ab8bc2 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -339,13 +339,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ed47360..64c6d17 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -179,13 +179,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 5cd7aa7..91efc07 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -284,13 +284,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 8fa0449..f92b20f 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -291,13 +291,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index c11a5c3..671f9e9 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -47,7 +47,7 @@ int board_early_init_f (void) int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { @@ -292,14 +292,6 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCI2 - ft_fsl_pci_setup(blob, "pci1", &pci2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/barco/barco.c b/board/barco/barco.c index b8d968b..6ce3480 100644 --- a/board/barco/barco.c +++ b/board/barco/barco.c @@ -290,12 +290,6 @@ void barcobcd_boot (void) int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { -#if 0 - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } -#endif barcobcd_boot (); return 0; diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index 85b350f..ff1ac4c 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -14,6 +14,7 @@ #include <spi.h> #include <asm/blackfin.h> #include <asm/net.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/otp.h> #include <asm/sdh.h> @@ -61,6 +62,7 @@ static void board_init_enetaddr(uchar *mac_addr) #define KSZ_WRITE 0x02 #define KSZ_READ 0x03 +#define KSZ_REG_CHID 0x00 /* Register 0: Chip ID0 */ #define KSZ_REG_STPID 0x01 /* Register 1: Chip ID1 / Start Switch */ #define KSZ_REG_GC9 0x0b /* Register 11: Global Control 9 */ #define KSZ_REG_P3C0 0x30 /* Register 48: Port 3 Control 0 */ @@ -78,15 +80,17 @@ static int ksz8893m_reg_set(struct spi_slave *slave, uchar reg, uchar data) return ksz8893m_transfer(slave, KSZ_WRITE, reg, data, din); } -static int ksz8893m_reg_clear(struct spi_slave *slave, uchar reg, uchar mask) +static int ksz8893m_reg_read(struct spi_slave *slave, uchar reg) { - int ret = 0; + int ret; unsigned char din[3]; + ret = ksz8893m_transfer(slave, KSZ_READ, reg, 0, din); + return ret ? ret : din[2]; +} - ret |= ksz8893m_transfer(slave, KSZ_READ, reg, 0, din); - ret |= ksz8893m_reg_set(slave, reg, din[2] & mask); - - return ret; +static int ksz8893m_reg_clear(struct spi_slave *slave, uchar reg, uchar mask) +{ + return ksz8893m_reg_set(slave, reg, ksz8893m_reg_read(slave, reg) & mask); } static int ksz8893m_reset(struct spi_slave *slave) @@ -107,16 +111,16 @@ static int ksz8893m_reset(struct spi_slave *slave) int board_eth_init(bd_t *bis) { - static bool switch_is_alive = false; + static bool switch_is_alive = false, phy_is_ksz = true; int ret; if (!switch_is_alive) { struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3); if (slave) { if (!spi_claim_bus(slave)) { - ret = ksz8893m_reset(slave); - if (!ret) - switch_is_alive = true; + phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88); + ret = phy_is_ksz ? ksz8893m_reset(slave) : 0; + switch_is_alive = (ret == 0); spi_release_bus(slave); } spi_free_slave(slave); @@ -143,18 +147,11 @@ int misc_init_r(void) int board_early_init_f(void) { -#if !defined(CONFIG_SYS_NO_FLASH) - /* setup BF518-EZBRD GPIO pin PG11 to AMS2. */ - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG11); - -# if !defined(CONFIG_BFIN_SPI) - /* setup BF518-EZBRD GPIO pin PG15 to AMS3. */ - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_3); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG15); -# endif -#endif - return 0; + /* connect async banks by default */ + const unsigned short pins[] = { + P_AMS2, P_AMS3, 0, + }; + return peripheral_request_list(pins, "async"); } #ifdef CONFIG_BFIN_SDH diff --git a/board/bf526-ezbrd/Makefile b/board/bf526-ezbrd/Makefile index a9ff760..f2bd2c2 100644 --- a/board/bf526-ezbrd/Makefile +++ b/board/bf526-ezbrd/Makefile @@ -30,7 +30,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS-y := $(BOARD).o -COBJS-$(CONFIG_STATUS_LED) += status-led.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/bf526-ezbrd/status-led.c b/board/bf526-ezbrd/status-led.c deleted file mode 100644 index 6327022..0000000 --- a/board/bf526-ezbrd/status-led.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * U-boot - status leds - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <config.h> -#include <command.h> -#include <status_led.h> - -static void set_led_f(int pf, int state) -{ - switch (state) { - case STATUS_LED_OFF: bfin_write_PORTFIO_CLEAR(pf); break; - case STATUS_LED_BLINKING: bfin_write_PORTFIO_TOGGLE(pf); break; - case STATUS_LED_ON: bfin_write_PORTFIO_SET(pf); break; - } -} -static void set_led_g(int pf, int state) -{ - switch (state) { - case STATUS_LED_OFF: bfin_write_PORTGIO_CLEAR(pf); break; - case STATUS_LED_BLINKING: bfin_write_PORTGIO_TOGGLE(pf); break; - case STATUS_LED_ON: bfin_write_PORTGIO_SET(pf); break; - } -} - -static void set_leds(led_id_t mask, int state) -{ - if (mask & 0x1) set_led_f(PF8, state); - if (mask & 0x2) set_led_g(PG11, state); - if (mask & 0x4) set_led_g(PG12, state); -} - -void __led_init(led_id_t mask, int state) -{ - bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~(PF8)); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~(PG11 | PG12)); - bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() & ~(PF8)); - bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() & ~(PG11 | PG12)); - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | (PF8)); - bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | (PG11 | PG12)); -} - -void __led_set(led_id_t mask, int state) -{ - set_leds(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - set_leds(mask, STATUS_LED_BLINKING); -} diff --git a/board/bf527-ad7160-eval/Makefile b/board/bf527-ad7160-eval/Makefile new file mode 100644 index 0000000..f2bd2c2 --- /dev/null +++ b/board/bf527-ad7160-eval/Makefile @@ -0,0 +1,54 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := $(BOARD).o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf527-ad7160-eval/bf527-ad7160-eval.c b/board/bf527-ad7160-eval/bf527-ad7160-eval.c new file mode 100644 index 0000000..b06d5ab --- /dev/null +++ b/board/bf527-ad7160-eval/bf527-ad7160-eval.c @@ -0,0 +1,25 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/blackfin.h> +#include <asm/mach-common/bits/pll.h> + +int checkboard(void) +{ + printf("Board: ADI BF527 AD7160-EVAL board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +int misc_init_r(void) +{ + /* CLKIN Buffer Output Enable */ + *pVR_CTL |= CLKBUFOE; + return 0; +} diff --git a/board/gth/config.mk b/board/bf527-ad7160-eval/config.mk index 3c80156..f85bef5 100644 --- a/board/gth/config.mk +++ b/board/bf527-ad7160-eval/config.mk @@ -1,5 +1,7 @@ # -# (C) Copyright 2000, 2001 +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,20 +23,11 @@ # MA 02111-1307 USA # -# -ifeq ($(TBASE),0) -TEXT_BASE = 0 -else -ifeq ($(TBASE),1) -TEXT_BASE = 0x80010070 -else -ifeq ($(TBASE),2) -TEXT_BASE = 0x80030070 -else -## Only to make ordinary make work -TEXT_BASE = 0x90000000 -endif -endif -endif +# This is not actually used for Blackfin boards so do not change it +#TEXT_BASE = do-not-use-me + +CFLAGS_lib_generic += -O2 +CFLAGS_lzma += -O2 -OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data +# Set some default LDR flags based on boot mode. +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf527-ezkit/bf527-ezkit.c b/board/bf527-ezkit/bf527-ezkit.c index a911880..211cf24 100644 --- a/board/bf527-ezkit/bf527-ezkit.c +++ b/board/bf527-ezkit/bf527-ezkit.c @@ -12,6 +12,7 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> +#include <asm/gpio.h> #include <asm/net.h> #include <asm/mach-common/bits/otp.h> @@ -75,9 +76,7 @@ void board_musb_init(void) /* * BF527 EZ-KITs require PG13 to be high for HOST mode */ - bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~PG13); - bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | PG13); - bfin_write_PORTGIO_SET(PG13); - SSYNC(); + gpio_request(GPIO_PG13, "musb-vbus"); + gpio_direction_output(GPIO_PG13, 1); } #endif diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c index 8f6ea23..891070b 100644 --- a/board/bf527-ezkit/video.c +++ b/board/bf527-ezkit/video.c @@ -11,6 +11,7 @@ #include <config.h> #include <malloc.h> #include <asm/blackfin.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> #include <spi.h> #include <linux/types.h> @@ -171,13 +172,11 @@ void DisablePPI(void) void Init_Ports(void) { - *pPORTF_MUX &= ~PORT_x_MUX_0_MASK; - *pPORTF_MUX |= PORT_x_MUX_0_FUNC_1; - *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF7; - - *pPORTG_MUX &= ~PORT_x_MUX_1_MASK; - *pPORTG_MUX |= PORT_x_MUX_1_FUNC_1; - *pPORTG_FER |= PG5; + const unsigned short pins[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4, + P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_FS2, 0, + }; + peripheral_request_list(pins, "lcd"); } void Init_PPI(void) diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 4abad08..935aad2 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -27,8 +27,7 @@ #include <common.h> #include <netdev.h> -#include <asm/io.h> -#include "bf533-stamp.h" +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -46,15 +45,10 @@ int checkboard(void) */ void swap_to(int device_id) { - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0); - SSYNC(); - bfin_write_FIO_FLAG_C(PF1); - if (device_id == ETHERNET) - bfin_write_FIO_FLAG_S(PF0); - else if (device_id == FLASH) - bfin_write_FIO_FLAG_C(PF0); - else - printf("Unknown device to switch\n"); + gpio_request(GPIO_PF0, "eth_flash_swap"); + gpio_request(GPIO_PF1, "eth_flash_swap"); + gpio_direction_output(GPIO_PF0, device_id == ETHERNET); + gpio_direction_output(GPIO_PF1, 0); SSYNC(); } @@ -75,24 +69,23 @@ int misc_init_r(void) #define STATUS_LED_OFF 0 #define STATUS_LED_ON 1 +static int gpio_setup; + static void stamp_led_set(int LED1, int LED2, int LED3) { - bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4)); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4)); - - if (LED1 == STATUS_LED_OFF) - *pFIO_FLAG_S = PF2; - else - *pFIO_FLAG_C = PF2; - if (LED2 == STATUS_LED_OFF) - *pFIO_FLAG_S = PF3; - else - *pFIO_FLAG_C = PF3; - if (LED3 == STATUS_LED_OFF) - *pFIO_FLAG_S = PF4; - else - *pFIO_FLAG_C = PF4; - SSYNC(); + if (!gpio_setup) { + gpio_request(GPIO_PF2, "boot_progress"); + gpio_request(GPIO_PF3, "boot_progress"); + gpio_request(GPIO_PF4, "boot_progress"); + gpio_direction_output(GPIO_PF2, LED1); + gpio_direction_output(GPIO_PF3, LED2); + gpio_direction_output(GPIO_PF4, LED3); + gpio_setup = 1; + } else { + gpio_set_value(GPIO_PF2, LED1); + gpio_set_value(GPIO_PF3, LED2); + gpio_set_value(GPIO_PF4, LED3); + } } void show_boot_progress(int status) @@ -134,43 +127,6 @@ void show_boot_progress(int status) } #endif -#ifdef CONFIG_STATUS_LED -#include <status_led.h> - -static void set_led(int pf, int state) -{ - switch (state) { - case STATUS_LED_OFF: bfin_write_FIO_FLAG_S(pf); break; - case STATUS_LED_BLINKING: bfin_write_FIO_FLAG_T(pf); break; - case STATUS_LED_ON: bfin_write_FIO_FLAG_C(pf); break; - } -} - -static void set_leds(led_id_t mask, int state) -{ - if (mask & 0x1) set_led(PF2, state); - if (mask & 0x2) set_led(PF3, state); - if (mask & 0x4) set_led(PF4, state); -} - -void __led_init(led_id_t mask, int state) -{ - bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4)); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4)); -} - -void __led_set(led_id_t mask, int state) -{ - set_leds(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - set_leds(mask, STATUS_LED_BLINKING); -} - -#endif - #ifdef CONFIG_SMC91111 int board_eth_init(bd_t *bis) { diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h deleted file mode 100644 index ebd39c7..0000000 --- a/board/bf533-stamp/bf533-stamp.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * U-boot - stamp.h - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef __STAMP_H__ -#define __STAMP_H__ - -extern void init_Flags(void); - -extern volatile unsigned long *ambctl0; -extern volatile unsigned long *ambctl1; -extern volatile unsigned long *amgctl; - -/* Definitions used in Compact Flash Boot support */ -#define FIO_EDGE_CF_BITS 0x0000 -#define FIO_POLAR_CF_BITS 0x0000 -#define FIO_EDGE_BITS 0x1E0 -#define FIO_POLAR_BITS 0x160 - -/* Compact flash status bits in status register */ -#define CF_STAT_BITS 0x00000060 - -/* CF Flags used to switch between expansion and external - * memory banks - */ -#define CF_PF0 0x0001 -#define CF_PF1 0x0002 -#define CF_PF1_PF0 0x0003 - -#endif diff --git a/board/bf533-stamp/ide-cf.c b/board/bf533-stamp/ide-cf.c index 23e786b..3e4080e 100644 --- a/board/bf533-stamp/ide-cf.c +++ b/board/bf533-stamp/ide-cf.c @@ -11,7 +11,6 @@ #include <common.h> #include <config.h> #include <asm/blackfin.h> -#include "bf533-stamp.h" void cf_outb(unsigned char val, volatile unsigned char *addr) { @@ -66,6 +65,15 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) swap_to(FLASH); } +/* Definitions used in Compact Flash Boot support */ +#define FIO_EDGE_CF_BITS 0x0000 +#define FIO_POLAR_CF_BITS 0x0000 +#define FIO_EDGE_BITS 0x1E0 +#define FIO_POLAR_BITS 0x160 + +/* Compact flash status bits in status register */ +#define CF_STAT_BITS 0x00000060 + void cf_ide_init(void) { int i, cf_stat; diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index f728e2c..4f8985b 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -29,9 +29,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o cmd_bf537led.o +COBJS-y := $(BOARD).o COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o -COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o COBJS-$(CONFIG_POST) += post.o post-memory.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 3911be6..ec888d4 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -46,11 +46,8 @@ int checkboard(void) void board_reset(void) { /* workaround for weak pull ups on ssel */ - if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { - bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF10); - bfin_write_PORTFIO_SET(PF10); - udelay(1); - } + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) + bfin_reset_boot_spi_cs(GPIO_PF10); } #ifdef CONFIG_BFIN_MAC diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c deleted file mode 100644 index 7d8f3ea..0000000 --- a/board/bf537-stamp/cmd_bf537led.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * U-boot - cmd_bf537led.c - * - * Copyright (C) 2006 Aaron Gage, Ocean Optics Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <config.h> -#include <command.h> -#include <asm/blackfin.h> -#include <asm/string.h> -#ifdef CONFIG_BF537_STAMP_LEDCMD - -/* Define the command usage in a reusable way */ -#define USAGE_LONG \ - "led <number> <action>\n" \ - " <number> - Index (0-5) of LED to change, or \"all\"\n" \ - " <action> - Must be one of:\n" \ - " on off toggle" - -/* Number of LEDs supported by the board */ -#define NUMBER_LEDS 6 -/* The BF537 stamp has 6 LEDs. This mask indicates that all should be lit. */ -#define LED_ALL_MASK 0x003F - -void show_cmd_usage(void); -void set_led_state(int index, int state); -void configure_GPIO_to_output(int index); - -/* Map of LEDs according to their GPIO ports. This can be rearranged or - * otherwise changed to account for different GPIO configurations. - */ -int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 }; - -#define ACTION_TOGGLE -1 -#define ACTION_OFF 0 -#define ACTION_ON 1 - -#define LED_STATE_OFF 0 -#define LED_STATE_ON 1 - -/* This is a trivial atoi implementation since we don't have one available */ -int atoi(char *string) -{ - int length; - int retval = 0; - int i; - int sign = 1; - - length = strlen(string); - for (i = 0; i < length; i++) { - if (0 == i && string[0] == '-') { - sign = -1; - continue; - } - if (string[i] > '9' || string[i] < '0') { - break; - } - retval *= 10; - retval += string[i] - '0'; - } - retval *= sign; - return retval; -} - -int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - int led_mask = 0; - int led_current_state = 0; - int action = ACTION_OFF; - int temp; - - if (3 != argc) { - /* Not enough arguments, so just show usage information */ - show_cmd_usage(); - return 1; - } - - if (strcmp(argv[1], "all") == 0) { - led_mask = LED_ALL_MASK; - } else { - temp = atoi(argv[1]); - if (temp < 0 || temp >= NUMBER_LEDS) { - printf("Invalid LED number [%s]\n", argv[1]); - show_cmd_usage(); - return 2; - } - led_mask |= (1 << temp); - } - - if (strcmp(argv[2], "off") == 0) { - action = ACTION_OFF; - } else if (strcmp(argv[2], "on") == 0) { - action = ACTION_ON; - } else if (strcmp(argv[2], "toggle") == 0) { - action = ACTION_TOGGLE; - } else { - printf("Invalid action [%s]\n", argv[2]); - show_cmd_usage(); - return 3; - } - - for (temp = 0; temp < NUMBER_LEDS; temp++) { - if ((led_mask & (1 << temp)) > 0) { - /* - * It is possible that the user has wired one of PF6-PF11 to - * something other than an LED, so this will only change a pin - * to output if the user has indicated a state change. This may - * happen a lot, but this way is safer than just setting all pins - * to output. - */ - configure_GPIO_to_output(temp); - - led_current_state = - ((*pPORTFIO & led_ports[temp]) > - 0) ? LED_STATE_ON : LED_STATE_OFF; - /* - printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp], - led_current_state); - printf("*pPORTFIO is %x\n", *pPORTFIO); - */ - if (ACTION_ON == action - || (ACTION_TOGGLE == action - && 0 == led_current_state)) { - printf("Turning LED %d on\n", temp); - set_led_state(temp, LED_STATE_ON); - } else { - printf("Turning LED %d off\n", temp); - set_led_state(temp, LED_STATE_OFF); - } - } - } - - return 0; -} - -/* - * The GPIO pins that go to the LEDs on the BF537 stamp must be configured - * as output. This function simply configures them that way. This could - * be done to all of the GPIO lines at once, but if a user is using a - * custom board, this will try to be nice and only change the GPIO lines - * that the user specifically names. - */ -void configure_GPIO_to_output(int index) -{ - int port; - - port = led_ports[index]; - - /* Clear the Port F Function Enable Register */ - *pPORTF_FER &= ~port; - /* Set the Port F I/O direction register */ - *pPORTFIO_DIR |= port; - /* Clear the Port F I/O Input Enable Register */ - *pPORTFIO_INEN &= ~port; -} - -/* Enforce the given state on the GPIO line for the indicated LED */ -void set_led_state(int index, int state) -{ - int port; - - port = led_ports[index]; - - if (LED_STATE_OFF == state) { - /* Clear the bit to turn off the LED */ - *pPORTFIO &= ~port; - } else { - /* Set the bit to turn on the LED */ - *pPORTFIO |= port; - } -} - -/* Display usage information */ -void show_cmd_usage() -{ - printf("Usage:\n%s\n", USAGE_LONG); -} - -/* Register information for u-boot to find this command */ -U_BOOT_CMD(led, 3, 1, do_bf537led, - "Control BF537 stamp LEDs", USAGE_LONG); - -#endif diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c deleted file mode 100644 index 7b753ad..0000000 --- a/board/bf537-stamp/spi_flash.c +++ /dev/null @@ -1,996 +0,0 @@ -/* - * SPI flash driver - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -/* Configuration options: - * CONFIG_SPI_BAUD - value to load into SPI_BAUD (divisor of SCLK to get SPI CLK) - * CONFIG_SPI_FLASH_SLOW_READ - force usage of the slower read - * WARNING: make sure your SCLK + SPI_BAUD is slow enough - */ - -#include <common.h> -#include <malloc.h> -#include <asm/io.h> -#include <asm/mach-common/bits/spi.h> -#include <asm/mach-common/bits/dma.h> - -/* Forcibly phase out these */ -#ifdef CONFIG_SPI_FLASH_NUM_SECTORS -# error do not set CONFIG_SPI_FLASH_NUM_SECTORS -#endif -#ifdef CONFIG_SPI_FLASH_SECTOR_SIZE -# error do not set CONFIG_SPI_FLASH_SECTOR_SIZE -#endif - -#if defined(CONFIG_SPI) - -struct flash_info { - char *name; - uint16_t id; - uint16_t ext_id; - unsigned sector_size; - unsigned num_sectors; -}; - -/* SPI Speeds: 50 MHz / 33 MHz */ -static struct flash_info flash_spansion_serial_flash[] = { - { "S25FL016", 0x0215, 0, 64 * 1024, 32 }, - { "S25FL032", 0x0216, 0, 64 * 1024, 64 }, - { "S25FL064", 0x0217, 0, 64 * 1024, 128 }, - { "S25FL128-00", 0x2018, 0x0301, 64 * 1024, 256 }, /* Package marking FL128PIF */ - { "S25FL128-01", 0x2018, 0x0300, 128 * 1024, 64 }, /* Package marking FL128PIFL */ - { NULL, 0, 0, 0, 0 } -}; - -/* SPI Speeds: 50 MHz / 20 MHz */ -static struct flash_info flash_st_serial_flash[] = { - { "m25p05", 0x2010, 0, 32 * 1024, 2 }, - { "m25p10", 0x2011, 0, 32 * 1024, 4 }, - { "m25p20", 0x2012, 0, 64 * 1024, 4 }, - { "m25p40", 0x2013, 0, 64 * 1024, 8 }, - { "m25p80", 0x20FF, 0, 64 * 1024, 16 }, - { "m25p16", 0x2015, 0, 64 * 1024, 32 }, - { "m25p32", 0x2016, 0, 64 * 1024, 64 }, - { "m25p64", 0x2017, 0, 64 * 1024, 128 }, - { "m25p128", 0x2018, 0, 256 * 1024, 64 }, - { NULL, 0, 0, 0, 0 } -}; - -/* SPI Speeds: 20 MHz / 40 MHz */ -static struct flash_info flash_sst_serial_flash[] = { - { "SST25WF512", 0x2501, 0, 4 * 1024, 128 }, - { "SST25WF010", 0x2502, 0, 4 * 1024, 256 }, - { "SST25WF020", 0x2503, 0, 4 * 1024, 512 }, - { "SST25WF040", 0x2504, 0, 4 * 1024, 1024 }, - { NULL, 0, 0, 0, 0 } -}; - -/* SPI Speeds: 66 MHz / 33 MHz */ -static struct flash_info flash_atmel_dataflash[] = { - { "AT45DB011x", 0x0c, 0, 264, 512 }, - { "AT45DB021x", 0x14, 0, 264, 1025 }, - { "AT45DB041x", 0x1c, 0, 264, 2048 }, - { "AT45DB081x", 0x24, 0, 264, 4096 }, - { "AT45DB161x", 0x2c, 0, 528, 4096 }, - { "AT45DB321x", 0x34, 0, 528, 8192 }, - { "AT45DB642x", 0x3c, 0, 1056, 8192 }, - { NULL, 0, 0, 0, 0 } -}; - -/* SPI Speed: 50 MHz / 25 MHz or 40 MHz / 20 MHz */ -static struct flash_info flash_winbond_serial_flash[] = { - { "W25X10", 0x3011, 0, 16 * 256, 32 }, - { "W25X20", 0x3012, 0, 16 * 256, 64 }, - { "W25X40", 0x3013, 0, 16 * 256, 128 }, - { "W25X80", 0x3014, 0, 16 * 256, 256 }, - { "W25P80", 0x2014, 0, 256 * 256, 16 }, - { "W25P16", 0x2015, 0, 256 * 256, 32 }, - { NULL, 0, 0, 0, 0 } -}; - -struct flash_ops { - uint8_t read, write, erase, status; -}; - -#ifdef CONFIG_SPI_FLASH_SLOW_READ -# define OP_READ 0x03 -#else -# define OP_READ 0x0B -#endif -static struct flash_ops flash_st_ops = { - .read = OP_READ, - .write = 0x02, - .erase = 0xD8, - .status = 0x05, -}; - -static struct flash_ops flash_sst_ops = { - .read = OP_READ, - .write = 0x02, - .erase = 0x20, - .status = 0x05, -}; - -static struct flash_ops flash_atmel_ops = { - .read = OP_READ, - .write = 0x82, - .erase = 0x81, - .status = 0xD7, -}; - -static struct flash_ops flash_winbond_ops = { - .read = OP_READ, - .write = 0x02, - .erase = 0x20, - .status = 0x05, -}; - -struct manufacturer_info { - const char *name; - uint8_t id; - struct flash_info *flashes; - struct flash_ops *ops; -}; - -static struct { - struct manufacturer_info *manufacturer; - struct flash_info *flash; - struct flash_ops *ops; - uint8_t manufacturer_id, device_id1, device_id2, device_extid1, device_extid2; - unsigned int write_length; - unsigned long sector_size, num_sectors; -} flash; - -enum { - JED_MANU_SPANSION = 0x01, - JED_MANU_ST = 0x20, - JED_MANU_SST = 0xBF, - JED_MANU_ATMEL = 0x1F, - JED_MANU_WINBOND = 0xEF, -}; - -static struct manufacturer_info flash_manufacturers[] = { - { - .name = "Spansion", - .id = JED_MANU_SPANSION, - .flashes = flash_spansion_serial_flash, - .ops = &flash_st_ops, - }, - { - .name = "ST", - .id = JED_MANU_ST, - .flashes = flash_st_serial_flash, - .ops = &flash_st_ops, - }, - { - .name = "SST", - .id = JED_MANU_SST, - .flashes = flash_sst_serial_flash, - .ops = &flash_sst_ops, - }, - { - .name = "Atmel", - .id = JED_MANU_ATMEL, - .flashes = flash_atmel_dataflash, - .ops = &flash_atmel_ops, - }, - { - .name = "Winbond", - .id = JED_MANU_WINBOND, - .flashes = flash_winbond_serial_flash, - .ops = &flash_winbond_ops, - }, -}; - -#define TIMEOUT 5000 /* timeout of 5 seconds */ - -/* If part has multiple SPI flashes, assume SPI0 as that is - * the one we can boot off of ... - */ -#ifndef pSPI_CTL -# define pSPI_CTL pSPI0_CTL -# define pSPI_BAUD pSPI0_BAUD -# define pSPI_FLG pSPI0_FLG -# define pSPI_RDBR pSPI0_RDBR -# define pSPI_STAT pSPI0_STAT -# define pSPI_TDBR pSPI0_TDBR -#endif - -/* Default to the SPI SSEL that we boot off of: - * BF54x, BF537, (everything new?): SSEL1 - * BF51x, BF533, BF561: SSEL2 - */ -#ifndef CONFIG_SPI_FLASH_SSEL -# define CONFIG_SPI_FLASH_SSEL BFIN_BOOT_SPI_SSEL -#endif -#define SSEL_MASK (1 << CONFIG_SPI_FLASH_SSEL) - -static void SPI_INIT(void) -{ - /* [#3541] This delay appears to be necessary, but not sure - * exactly why as the history behind it is non-existant. - */ - *pSPI_CTL = 0; - udelay(CONFIG_CCLK_HZ / 25000000); - - /* enable SPI pins: SSEL, MOSI, MISO, SCK */ -#ifdef __ADSPBF54x__ - *pPORTE_FER |= (PE0 | PE1 | PE2 | PE4); -#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) - *pPORTF_FER |= (PF10 | PF11 | PF12 | PF13); -#elif defined(__ADSPBF52x__) - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4); -#elif defined(__ADSPBF51x__) - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_1); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG12 | PG13 | PG14 | PG15); -#endif - - /* initate communication upon write of TDBR */ - *pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE); - *pSPI_BAUD = CONFIG_SPI_BAUD; -} - -static void SPI_DEINIT(void) -{ - *pSPI_CTL = 0; - *pSPI_BAUD = 0; - SSYNC(); -} - -static void SPI_ON(void) -{ - /* toggle SSEL to reset the device so it'll take a new command */ - *pSPI_FLG = 0xFF00 | SSEL_MASK; - SSYNC(); - - *pSPI_FLG = ((0xFF & ~SSEL_MASK) << 8) | SSEL_MASK; - SSYNC(); -} - -static void SPI_OFF(void) -{ - /* put SPI settings back to reset state */ - *pSPI_FLG = 0xFF00; - SSYNC(); -} - -static uint8_t spi_write_read_byte(uint8_t transmit) -{ - *pSPI_TDBR = transmit; - SSYNC(); - - while ((*pSPI_STAT & TXS)) - if (ctrlc()) - break; - while (!(*pSPI_STAT & SPIF)) - if (ctrlc()) - break; - while (!(*pSPI_STAT & RXS)) - if (ctrlc()) - break; - - /* Read dummy to empty the receive register */ - return *pSPI_RDBR; -} - -static uint8_t read_status_register(void) -{ - uint8_t status_register; - - /* send instruction to read status register */ - SPI_ON(); - spi_write_read_byte(flash.ops->status); - /* send dummy to receive the status register */ - status_register = spi_write_read_byte(0); - SPI_OFF(); - - return status_register; -} - -static int wait_for_ready_status(void) -{ - ulong start = get_timer(0); - - while (get_timer(0) - start < TIMEOUT) { - switch (flash.manufacturer_id) { - case JED_MANU_SPANSION: - case JED_MANU_ST: - case JED_MANU_SST: - case JED_MANU_WINBOND: - if (!(read_status_register() & 0x01)) - return 0; - break; - - case JED_MANU_ATMEL: - if (read_status_register() & 0x80) - return 0; - break; - } - - if (ctrlc()) { - puts("\nAbort\n"); - return -1; - } - } - - puts("Timeout\n"); - return -1; -} - -static int enable_writing(void) -{ - ulong start; - - if (flash.manufacturer_id == JED_MANU_ATMEL) - return 0; - - /* A write enable instruction must previously have been executed */ - SPI_ON(); - spi_write_read_byte(0x06); - SPI_OFF(); - - /* The status register will be polled to check the write enable latch "WREN" */ - start = get_timer(0); - while (get_timer(0) - start < TIMEOUT) { - if (read_status_register() & 0x02) - return 0; - - if (ctrlc()) { - puts("\nAbort\n"); - return -1; - } - } - - puts("Timeout\n"); - return -1; -} - -static void write_status_register(uint8_t val) -{ - if (flash.manufacturer_id != JED_MANU_SST) - hang(); - - if (enable_writing()) - return; - - /* send instruction to write status register */ - SPI_ON(); - spi_write_read_byte(0x01); - /* and clear it! */ - spi_write_read_byte(val); - SPI_OFF(); -} - -/* Request and read the manufacturer and device id of parts which - * are compatible with the JEDEC standard (JEP106) and use that to - * setup other operating conditions. - */ -static int spi_detect_part(void) -{ - uint16_t dev_id, dev_extid; - size_t i; - - static char called_init; - if (called_init) - return 0; - -#ifdef CONFIG_SPI_FLASH_M25P80 - flash.manufacturer_id = JED_MANU_ST; - flash.device_id1 = 0x20; - flash.device_id2 = 0xFF; -#else - SPI_ON(); - - /* Send the request for the part identification */ - spi_write_read_byte(0x9F); - - /* Now read in the manufacturer id bytes */ - do { - flash.manufacturer_id = spi_write_read_byte(0); - if (flash.manufacturer_id == 0x7F) - puts("Warning: unhandled manufacturer continuation byte!\n"); - } while (flash.manufacturer_id == 0x7F); - - /* Now read in the first device id byte */ - flash.device_id1 = spi_write_read_byte(0); - - /* Now read in the second device id byte */ - flash.device_id2 = spi_write_read_byte(0); - - /* Read extended device ids */ - flash.device_extid1 = spi_write_read_byte(0); - flash.device_extid2 = spi_write_read_byte(0); - - SPI_OFF(); -#endif - - dev_id = (flash.device_id1 << 8) | flash.device_id2; - dev_extid = (flash.device_extid1 << 8) | flash.device_extid2; - - for (i = 0; i < ARRAY_SIZE(flash_manufacturers); ++i) { - if (flash.manufacturer_id == flash_manufacturers[i].id) - break; - } - if (i == ARRAY_SIZE(flash_manufacturers)) - goto unknown; - - flash.manufacturer = &flash_manufacturers[i]; - flash.ops = flash_manufacturers[i].ops; - - switch (flash.manufacturer_id) { - case JED_MANU_SPANSION: - case JED_MANU_ST: - case JED_MANU_SST: - case JED_MANU_WINBOND: - for (i = 0; flash.manufacturer->flashes[i].name; ++i) { - if (dev_id == flash.manufacturer->flashes[i].id && - (flash.manufacturer->flashes[i].ext_id == 0 || - flash.manufacturer->flashes[i].ext_id == dev_extid)) - break; - } - if (!flash.manufacturer->flashes[i].name) - goto unknown; - - flash.flash = &flash.manufacturer->flashes[i]; - flash.sector_size = flash.flash->sector_size; - flash.num_sectors = flash.flash->num_sectors; - - if (flash.manufacturer_id == JED_MANU_SST) - flash.write_length = 1; /* pwnt :( */ - else - flash.write_length = 256; - break; - - case JED_MANU_ATMEL: { - uint8_t status = read_status_register(); - - for (i = 0; flash.manufacturer->flashes[i].name; ++i) { - if ((status & 0x3c) == flash.manufacturer->flashes[i].id) - break; - } - if (!flash.manufacturer->flashes[i].name) - goto unknown; - - flash.flash = &flash.manufacturer->flashes[i]; - flash.sector_size = flash.flash->sector_size; - flash.num_sectors = flash.flash->num_sectors; - - /* see if flash is in "power of 2" mode */ - if (status & 0x1) - flash.sector_size &= ~(1 << (ffs(flash.sector_size) - 1)); - - flash.write_length = flash.sector_size; - break; - } - } - - /* the SST parts power up with software protection enabled by default */ - if (flash.manufacturer_id == JED_MANU_SST) - write_status_register(0); - - called_init = 1; - return 0; - - unknown: - printf("Unknown SPI device: 0x%02X 0x%02X 0x%02X\n", - flash.manufacturer_id, flash.device_id1, flash.device_id2); - return 1; -} - -/* - * Function: spi_init_f - * Description: Init SPI-Controller (ROM part) - * return: --- - */ -void spi_init_f(void) -{ -} - -/* - * Function: spi_init_r - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * return: --- - */ -void spi_init_r(void) -{ -#if defined(CONFIG_POST) && (CONFIG_POST & CONFIG_SYS_POST_SPI) - /* Our testing strategy here is pretty basic: - * - fill src memory with an 8-bit pattern - * - write the src memory to the SPI flash - * - read the SPI flash into the dst memory - * - compare src and dst memory regions - * - repeat a few times - * The variations we test for: - * - change the 8-bit pattern a bit - * - change the read/write block size so we know: - * - writes smaller/equal/larger than the buffer work - * - writes smaller/equal/larger than the sector work - * - change the SPI offsets so we know: - * - writing partial sectors works - */ - uint8_t *mem_src, *mem_dst; - size_t i, c, l, o; - size_t test_count, errors; - uint8_t pattern; - - SPI_INIT(); - - if (spi_detect_part()) - goto out; - eeprom_info(); - - ulong lengths[] = { - flash.write_length, - flash.write_length * 2, - flash.write_length / 2, - flash.sector_size, - flash.sector_size * 2, - flash.sector_size / 2 - }; - ulong offsets[] = { - 0, - flash.write_length, - flash.write_length * 2, - flash.write_length / 2, - flash.write_length / 4, - flash.sector_size, - flash.sector_size * 2, - flash.sector_size / 2, - flash.sector_size / 4, - }; - - /* the exact addresses are arbitrary ... they just need to not overlap */ - mem_src = (void *)(0); - mem_dst = (void *)(max(flash.write_length, flash.sector_size) * 2); - - test_count = 0; - errors = 0; - pattern = 0x00; - - for (i = 0; i < 16; ++i) { /* 16 = 8 bits * 2 iterations */ - for (l = 0; l < ARRAY_SIZE(lengths); ++l) { - for (o = 0; o < ARRAY_SIZE(offsets); ++o) { - ulong len = lengths[l]; - ulong off = offsets[o]; - - printf("Testing pattern 0x%02X of length %5lu and offset %5lu: ", pattern, len, off); - - /* setup the source memory region */ - memset(mem_src, pattern, len); - - test_count += 4; - for (c = 0; c < 4; ++c) { /* 4 is just a random repeat count */ - if (ctrlc()) { - puts("\nAbort\n"); - goto out; - } - - /* make sure background fill pattern != pattern */ - memset(mem_dst, pattern ^ 0xFF, len); - - /* write out the source memory and then read it back and compare */ - eeprom_write(0, off, mem_src, len); - eeprom_read(0, off, mem_dst, len); - - if (memcmp(mem_src, mem_dst, len)) { - for (c = 0; c < len; ++c) - if (mem_src[c] != mem_dst[c]) - break; - printf(" FAIL @ offset %u, skipping repeats ", c); - ++errors; - break; - } - - /* XXX: should shrink write region here to test with - * leading/trailing canaries so we know surrounding - * bytes don't get screwed. - */ - } - puts("\n"); - } - } - - /* invert the pattern every other run and shift out bits slowly */ - pattern ^= 0xFF; - if (i % 2) - pattern = (pattern | 0x01) << 1; - } - - if (errors) - printf("SPI FAIL: Out of %i tests, there were %i errors ;(\n", test_count, errors); - else - printf("SPI PASS: %i tests worked!\n", test_count); - - out: - SPI_DEINIT(); - -#endif -} - -static void transmit_address(uint32_t addr) -{ - /* Send the highest byte of the 24 bit address at first */ - spi_write_read_byte(addr >> 16); - /* Send the middle byte of the 24 bit address at second */ - spi_write_read_byte(addr >> 8); - /* Send the lowest byte of the 24 bit address finally */ - spi_write_read_byte(addr); -} - -/* - * Read a value from flash for verify purpose - * Inputs: unsigned long ulStart - holds the SPI start address - * int pnData - pointer to store value read from flash - * long lCount - number of elements to read - */ -#ifdef CONFIG_SPI_READFLASH_NODMA -static int read_flash(unsigned long address, long count, uchar *buffer) -{ - size_t i, j; - - /* Send the read command to SPI device */ - SPI_ON(); - spi_write_read_byte(flash.ops->read); - transmit_address(address); - -#ifndef CONFIG_SPI_FLASH_SLOW_READ - /* Send dummy byte when doing SPI fast reads */ - spi_write_read_byte(0); -#endif - - /* After the SPI device address has been placed on the MOSI pin the data can be */ - /* received on the MISO pin. */ - j = flash.sector_size << 1; - for (i = 1; i <= count; ++i) { - *buffer++ = spi_write_read_byte(0); - if (!j--) { - puts("."); - j = flash.sector_size; - } - } - - SPI_OFF(); - - return 0; -} -#else - -#ifdef __ADSPBF54x__ -#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA4_IRQ_STATUS -#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA4_IRQ_STATUS -#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA4_CURR_DESC_PTR -#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA4_CONFIG -#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) -#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA5_IRQ_STATUS -#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA5_IRQ_STATUS -#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA5_CURR_DESC_PTR -#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA5_CONFIG -#elif defined(__ADSPBF561__) -#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA16_IRQ_STATUS -#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA16_IRQ_STATUS -#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA16_CURR_DESC_PTR -#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA16_CONFIG -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \ - defined(__ADSPBF52x__) || defined(__ADSPBF51x__) -#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA7_IRQ_STATUS -#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA7_IRQ_STATUS -#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA7_CURR_DESC_PTR -#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA7_CONFIG -#else -#error "Please provide SPI DMA channel defines" -#endif - -struct dmadesc_array { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; -} __attribute__((packed)); - -/* - * Read a value from flash for verify purpose - * Inputs: unsigned long ulStart - holds the SPI start address - * int pnData - pointer to store value read from flash - * long lCount - number of elements to read - */ - -static int read_flash(unsigned long address, long count, uchar *buffer) -{ - unsigned int ndsize; - struct dmadesc_array dma[2]; - /* Send the read command to SPI device */ - - if (!count) - return 0; - - dma[0].start_addr = (unsigned long)buffer; - dma[0].x_modify = 1; - if (count <= 65536) { - blackfin_dcache_flush_invalidate_range(buffer, buffer + count); - ndsize = NDSIZE_5; - dma[0].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN; - dma[0].x_count = count; - } else { - blackfin_dcache_flush_invalidate_range(buffer, buffer + 65536 - 1); - ndsize = NDSIZE_7; - dma[0].cfg = NDSIZE_5 | WNR | WDSIZE_8 | FLOW_ARRAY | DMAEN | DMA2D; - dma[0].x_count = 0; /* 2^16 */ - dma[0].y_count = count >> 16; /* count / 2^16 */ - dma[0].y_modify = 1; - dma[1].start_addr = (unsigned long)(buffer + (count & ~0xFFFF)); - dma[1].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN; - dma[1].x_count = count & 0xFFFF; /* count % 2^16 */ - dma[1].x_modify = 1; - } - - bfin_write_DMA_SPI_CONFIG(0); - bfin_write_DMA_SPI_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_DMA_SPI_CURR_DESC_PTR(dma); - - SPI_ON(); - - spi_write_read_byte(flash.ops->read); - transmit_address(address); - -#ifndef CONFIG_SPI_FLASH_SLOW_READ - /* Send dummy byte when doing SPI fast reads */ - spi_write_read_byte(0); -#endif - - bfin_write_DMA_SPI_CONFIG(ndsize | FLOW_ARRAY | DMAEN); - *pSPI_CTL = (MSTR | CPHA | CPOL | RDBR_DMA | SPE | SZ); - SSYNC(); - - /* - * We already invalidated the first 64k, - * now while we just wait invalidate the remaining part. - * Its not likely that the DMA is going to overtake - */ - if (count > 65536) - blackfin_dcache_flush_invalidate_range(buffer + 65536, - buffer + count); - - while (!(bfin_read_DMA_SPI_IRQ_STATUS() & DMA_DONE)) - if (ctrlc()) - break; - - SPI_OFF(); - - *pSPI_CTL = 0; - - bfin_write_DMA_SPI_CONFIG(0); - - *pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE); - - return 0; -} -#endif - -static long address_to_sector(unsigned long address) -{ - if (address > (flash.num_sectors * flash.sector_size) - 1) - return -1; - return address / flash.sector_size; -} - -static int erase_sector(int address) -{ - /* sector gets checked in higher function, so assume it's valid - * here and figure out the offset of the sector in flash - */ - if (enable_writing()) - return -1; - - /* - * Send the erase block command to the flash followed by the 24 address - * to point to the start of a sector - */ - SPI_ON(); - spi_write_read_byte(flash.ops->erase); - transmit_address(address); - SPI_OFF(); - - return wait_for_ready_status(); -} - -/* Write [count] bytes out of [buffer] into the given SPI [address] */ -static long write_flash(unsigned long address, long count, uchar *buffer) -{ - long i, write_buffer_size; - - if (enable_writing()) - return -1; - - /* Send write command followed by the 24 bit address */ - SPI_ON(); - spi_write_read_byte(flash.ops->write); - transmit_address(address); - - /* Shoot out a single write buffer */ - write_buffer_size = min(count, flash.write_length); - for (i = 0; i < write_buffer_size; ++i) - spi_write_read_byte(buffer[i]); - - SPI_OFF(); - - /* Wait for the flash to do its thing */ - if (wait_for_ready_status()) { - puts("SPI Program Time out! "); - return -1; - } - - return i; -} - -/* Write [count] bytes out of [buffer] into the given SPI [address] */ -static int write_sector(unsigned long address, long count, uchar *buffer) -{ - long write_cnt; - - while (count != 0) { - write_cnt = write_flash(address, count, buffer); - if (write_cnt == -1) - return -1; - - /* Now that we've sent some bytes out to the flash, update - * our counters a bit - */ - count -= write_cnt; - address += write_cnt; - buffer += write_cnt; - } - - /* return the appropriate error code */ - return 0; -} - -/* - * Function: spi_write - */ -ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) -{ - unsigned long offset; - int start_sector, end_sector; - int start_byte, end_byte; - uchar *temp = NULL; - int num, ret = 0; - - SPI_INIT(); - - if (spi_detect_part()) - goto out; - - offset = addr[0] << 16 | addr[1] << 8 | addr[2]; - - /* Get the start block number */ - start_sector = address_to_sector(offset); - if (start_sector == -1) { - puts("Invalid sector! "); - goto out; - } - end_sector = address_to_sector(offset + len - 1); - if (end_sector == -1) { - puts("Invalid sector! "); - goto out; - } - - /* Since flashes operate in sector units but the eeprom command - * operates as a continuous stream of bytes, we need to emulate - * the eeprom behavior. So here we read in the sector, overlay - * any bytes we're actually modifying, erase the sector, and - * then write back out the new sector. - */ - temp = malloc(flash.sector_size); - if (!temp) { - puts("Malloc for sector failed! "); - goto out; - } - - for (num = start_sector; num <= end_sector; num++) { - unsigned long address = num * flash.sector_size; - - /* XXX: should add an optimization when spanning sectors: - * No point in reading in a sector if we're going to be - * clobbering the whole thing. Need to also add a test - * case to make sure the optimization is correct. - */ - if (read_flash(address, flash.sector_size, temp)) { - puts("Read sector failed! "); - len = 0; - break; - } - - start_byte = max(address, offset); - end_byte = address + flash.sector_size - 1; - if (end_byte > (offset + len)) - end_byte = (offset + len - 1); - - memcpy(temp + start_byte - address, - buffer + start_byte - offset, - end_byte - start_byte + 1); - - if (erase_sector(address)) { - puts("Erase sector failed! "); - goto out; - } - - if (write_sector(address, flash.sector_size, temp)) { - puts("Write sector failed! "); - goto out; - } - - puts("."); - } - - ret = len; - - out: - free(temp); - - SPI_DEINIT(); - - return ret; -} - -/* - * Function: spi_read - */ -ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) -{ - unsigned long offset; - - SPI_INIT(); - - if (spi_detect_part()) - len = 0; - else { - offset = addr[0] << 16 | addr[1] << 8 | addr[2]; - read_flash(offset, len, buffer); - } - - SPI_DEINIT(); - - return len; -} - -/* - * Spit out some useful information about the SPI eeprom - */ -int eeprom_info(void) -{ - int ret = 0; - - SPI_INIT(); - - if (spi_detect_part()) - ret = 1; - else - printf("SPI Device: %s 0x%02X (%s) 0x%02X 0x%02X\n" - "Parameters: num sectors = %lu, sector size = %lu, write size = %i\n" - "Flash Size: %lu mbit (%lu mbyte)\n" - "Status: 0x%02X\n", - flash.flash->name, flash.manufacturer_id, flash.manufacturer->name, - flash.device_id1, flash.device_id2, flash.num_sectors, - flash.sector_size, flash.write_length, - (flash.num_sectors * flash.sector_size) >> 17, - (flash.num_sectors * flash.sector_size) >> 20, - read_status_register()); - - SPI_DEINIT(); - - return ret; -} - -#endif diff --git a/board/bf548-ezkit/bf548-ezkit.c b/board/bf548-ezkit/bf548-ezkit.c index 65fb81a..cb9ee86 100644 --- a/board/bf548-ezkit/bf548-ezkit.c +++ b/board/bf548-ezkit/bf548-ezkit.c @@ -7,10 +7,12 @@ */ #include <common.h> -#include <netdev.h> #include <config.h> #include <command.h> +#include <netdev.h> #include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> #include <asm/sdh.h> DECLARE_GLOBAL_DATA_PTR; @@ -24,53 +26,13 @@ int checkboard(void) int board_early_init_f(void) { - /* Port H: PH8 - PH13 == A4 - A9 - * address lines of the parallel asynchronous memory interface - */ - - /************************************************ - * configure GPIO * - * set port H function enable register * - * configure PH8-PH13 as peripheral (not GPIO) * - *************************************************/ - bfin_write_PORTH_FER(0x3F03); - - /************************************************ - * set port H MUX to configure PH8-PH13 * - * 1st Function (MUX = 00) (bits 16-27 == 0) * - * Set to address signals A4-A9 * - *************************************************/ - bfin_write_PORTH_MUX(0); - - /************************************************ - * set port H direction register * - * enable PH8-PH13 as outputs * - *************************************************/ - bfin_write_PORTH_DIR_SET(0x3F00); - - /* Port I: PI0 - PH14 == A10 - A24 - * address lines of the parallel asynchronous memory interface - */ - - /************************************************ - * set port I function enable register * - * configure PI0-PI14 as peripheral (not GPIO) * - *************************************************/ - bfin_write_PORTI_FER(0x7fff); - - /************************************************** - * set PORT I MUX to configure PI14-PI0 as * - * 1st Function (MUX=00) - address signals A10-A24 * - ***************************************************/ - bfin_write_PORTI_MUX(0); - - /**************************************** - * set PORT I direction register * - * enable PI0 - PI14 as outputs * - *****************************************/ - bfin_write_PORTI_DIR_SET(0x7fff); - - return 0; + /* Set async addr lines as peripheral */ + const unsigned short pins[] = { + P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, + P_A21, P_A22, P_A23, P_A24, 0 + }; + return peripheral_request_list(pins, "async"); } #ifdef CONFIG_SMC911X @@ -96,9 +58,7 @@ void board_musb_init(void) * be low for device mode and high for host mode. We set it high * here because we are in host mode. */ - bfin_write_PORTE_FER(bfin_read_PORTE_FER() & ~PE7); - bfin_write_PORTE_DIR_SET(PE7); - bfin_write_PORTE_SET(PE7); - SSYNC(); + gpio_request(GPIO_PE7, "musb-vbus"); + gpio_direction_output(GPIO_PE7, 1); } #endif diff --git a/board/bf548-ezkit/video.c b/board/bf548-ezkit/video.c index 10b08e2..af3d58b 100644 --- a/board/bf548-ezkit/video.c +++ b/board/bf548-ezkit/video.c @@ -11,6 +11,8 @@ #include <config.h> #include <malloc.h> #include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> #include <i2c.h> #include <linux/types.h> @@ -173,22 +175,21 @@ void Init_DMA(void *dst) void Init_Ports(void) { - *pPORTF_MUX = 0x00000000; - *pPORTF_FER |= 0xFFFF; /* PPI0..15 */ - - *pPORTG_MUX &= ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK); - *pPORTG_FER |= PG0 | PG1 | PG2 | PG3 | PG4; /* CLK, FS1, FS2, PPI16..17 */ - + const unsigned short pins[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4, + P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9, + P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, + P_PPI0_D15, P_PPI0_D16, P_PPI0_D17, #if !defined(CONFIG_VIDEO_RGB666) - *pPORTD_MUX &= ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK); - *pPORTD_MUX |= (PORT_x_MUX_0_FUNC_4 | PORT_x_MUX_1_FUNC_4 | PORT_x_MUX_2_FUNC_4 | PORT_x_MUX_3_FUNC_4 | PORT_x_MUX_4_FUNC_4 | PORT_x_MUX_5_FUNC_4); - *pPORTD_FER |= PD0 | PD1 | PD2 | PD3 | PD4 | PD5; /* PPI18..23 */ + P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, + P_PPI0_D23, #endif + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0, + }; + peripheral_request_list(pins, "lcd"); - *pPORTE_FER &= ~PE3; /* DISP */ - *pPORTE_DIR_SET = PE3; - *pPORTE_SET = PE3; - + gpio_request(GPIO_PE3, "lcd-disp"); + gpio_direction_output(GPIO_PE3, 1); } void EnableDMA(void) diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c index 6355c10..06d004a 100644 --- a/board/blackstamp/blackstamp.c +++ b/board/blackstamp/blackstamp.c @@ -13,7 +13,7 @@ #include <common.h> #include <netdev.h> -#include <asm/io.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -27,14 +27,8 @@ int checkboard(void) #ifdef SHARED_RESOURCES void swap_to(int device_id) { - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); - SSYNC(); - if (device_id == ETHERNET) - bfin_write_FIO_FLAG_S(PF0); - else if (device_id == FLASH) - bfin_write_FIO_FLAG_C(PF0); - else - printf("Unknown device to switch\n"); + gpio_request(GPIO_PF0, "eth_flash_swap"); + gpio_direction_output(GPIO_PF0, device_id == ETHERNET); SSYNC(); } #endif diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index da34b40..9df45c0 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -177,13 +177,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile index c2cd244..bad018a 100644 --- a/board/cm-bf527/Makefile +++ b/board/cm-bf527/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o gpio.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/cm-bf527/gpio.c b/board/cm-bf527/gpio.c deleted file mode 100644 index 7e0babe..0000000 --- a/board/cm-bf527/gpio.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Control GPIO pins on the fly - * - * Copyright (c) 2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> - -#include <asm/blackfin.h> - -int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc != 3) { - show_usage: - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - } - - /* parse the behavior */ - ulong port_cmd = 0; - switch (argv[1][0]) { - case 'i': break; - case 's': port_cmd = (PORTFIO_SET - PORTFIO); break; - case 'c': port_cmd = (PORTFIO_CLEAR - PORTFIO); break; - case 't': port_cmd = (PORTFIO_TOGGLE - PORTFIO); break; - default: goto show_usage; - } - - /* parse the pin with format: [p]<fgh><#> */ - const char *str_pin = argv[2]; - - /* grab the [p]<fgh> portion */ - ulong port_base; - if (*str_pin == 'p') ++str_pin; - switch (*str_pin) { - case 'f': port_base = PORTFIO; break; - case 'g': port_base = PORTGIO; break; - case 'h': port_base = PORTHIO; break; - default: goto show_usage; - } - - /* grab the <#> portion */ - ulong pin = simple_strtoul(str_pin+1, NULL, 10); - ulong pin_mask = (1 << pin); - if (pin > 15) - goto show_usage; - - /* finally, let's do it: set direction and exec command */ - switch (*str_pin) { - case 'f': bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~pin_mask); break; - case 'g': bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~pin_mask); break; - case 'h': bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~pin_mask); break; - } - - ulong port_dir = port_base + (PORTFIO_DIR - PORTFIO); - if (argv[1][0] == 'i') - bfin_write16(port_dir, bfin_read16(port_dir) & ~pin_mask); - else { - bfin_write16(port_dir, bfin_read16(port_dir) | pin_mask); - bfin_write16(port_base + port_cmd, pin_mask); - } - - printf("gpio: pin %li on port %c has been %c\n", pin, *str_pin, argv[1][0]); - - return 0; -} - -U_BOOT_CMD(gpio, 3, 0, do_gpio, - "gpio - set/clear/toggle gpio output pins\n", - "<s|c|t> <port><pin>\n" - " - set/clear/toggle the specified pin\n"); diff --git a/board/cm-bf527/gpio_cfi_flash.c b/board/cm-bf527/gpio_cfi_flash.c index 7167680..f8ccc07 100644 --- a/board/cm-bf527/gpio_cfi_flash.c +++ b/board/cm-bf527/gpio_cfi_flash.c @@ -8,12 +8,13 @@ #include <common.h> #include <asm/blackfin.h> +#include <asm/gpio.h> #include <asm/io.h> #include "gpio_cfi_flash.h" -#define GPIO_PIN_1 PH9 +#define GPIO_PIN_1 GPIO_PH9 #define GPIO_MASK_1 (1 << 21) -#define GPIO_PIN_2 PG11 +#define GPIO_PIN_2 GPIO_PG11 #define GPIO_MASK_2 (1 << 22) #define GPIO_MASK (GPIO_MASK_1 | GPIO_MASK_2) @@ -21,16 +22,10 @@ void *gpio_cfi_flash_swizzle(void *vaddr) { unsigned long addr = (unsigned long)vaddr; - if (addr & GPIO_MASK_1) - bfin_write_PORTHIO_SET(GPIO_PIN_1); - else - bfin_write_PORTHIO_CLEAR(GPIO_PIN_1); + gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1); #ifdef GPIO_MASK_2 - if (addr & GPIO_MASK_2) - bfin_write_PORTGIO_SET(GPIO_PIN_2); - else - bfin_write_PORTGIO_CLEAR(GPIO_PIN_2); + gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2); #endif SSYNC(); @@ -57,7 +52,9 @@ MAKE_FLASH(64, q) /* flash_write64() flash_read64() */ void gpio_cfi_flash_init(void) { - bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() | GPIO_PIN_1); - bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | GPIO_PIN_2); + gpio_request(GPIO_PIN_1, "gpio_cfi_flash"); +#ifdef GPIO_MASK_2 + gpio_request(GPIO_PIN_2, "gpio_cfi_flash"); +#endif gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE); } diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile index 3812ba1..bad018a 100644 --- a/board/cm-bf537e/Makefile +++ b/board/cm-bf537e/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/cm-bf537e/flash.c b/board/cm-bf537e/flash.c deleted file mode 100644 index a4c1ec0..0000000 --- a/board/cm-bf537e/flash.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * flash.c - helper commands for working with GPIO-assisted flash - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include "gpio_cfi_flash.h" - -int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong faddr = CONFIG_SYS_FLASH_BASE; - ushort data; - ulong dflg; - - if (argc > 1) { - dflg = simple_strtoul(argv[1], NULL, 16); - faddr |= (dflg << 21); - gpio_cfi_flash_swizzle((void *)faddr); - } else { - data = bfin_read_PORTFIO(); - printf("Port F data %04x (PF4:%i)\n", data, !!(data & PF4)); - } - - return 0; -} - -U_BOOT_CMD(pf, 3, 0, do_pf, - "set/clear PF4 GPIO flash bank switch\n", - "<pf4> - set PF4 GPIO pin state\n"); diff --git a/board/cm-bf537e/gpio_cfi_flash.c b/board/cm-bf537e/gpio_cfi_flash.c index a9e69cf..79ee844 100644 --- a/board/cm-bf537e/gpio_cfi_flash.c +++ b/board/cm-bf537e/gpio_cfi_flash.c @@ -8,10 +8,11 @@ #include <common.h> #include <asm/blackfin.h> +#include <asm/gpio.h> #include <asm/io.h> #include "gpio_cfi_flash.h" -#define GPIO_PIN_1 PF4 +#define GPIO_PIN_1 GPIO_PF4 #define GPIO_MASK_1 (1 << 21) #define GPIO_MASK (GPIO_MASK_1) @@ -19,16 +20,10 @@ void *gpio_cfi_flash_swizzle(void *vaddr) { unsigned long addr = (unsigned long)vaddr; - if (addr & GPIO_MASK_1) - bfin_write_PORTFIO_SET(GPIO_PIN_1); - else - bfin_write_PORTFIO_CLEAR(GPIO_PIN_1); + gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1); #ifdef GPIO_MASK_2 - if (addr & GPIO_MASK_2) - bfin_write_PORTGIO_SET(GPIO_PIN_2); - else - bfin_write_PORTGIO_CLEAR(GPIO_PIN_2); + gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2); #endif SSYNC(); @@ -55,6 +50,9 @@ MAKE_FLASH(64, q) /* flash_write64() flash_read64() */ void gpio_cfi_flash_init(void) { - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | GPIO_PIN_1); + gpio_request(GPIO_PIN_1, "gpio_cfi_flash"); +#ifdef GPIO_MASK_2 + gpio_request(GPIO_PIN_2, "gpio_cfi_flash"); +#endif gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE); } diff --git a/board/cm-bf537u/Makefile b/board/cm-bf537u/Makefile index 3812ba1..bad018a 100644 --- a/board/cm-bf537u/Makefile +++ b/board/cm-bf537u/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/cm-bf537u/flash.c b/board/cm-bf537u/flash.c deleted file mode 100644 index 52abe79..0000000 --- a/board/cm-bf537u/flash.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * flash.c - helper commands for working with GPIO-assisted flash - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include "gpio_cfi_flash.h" - -int do_ph(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong faddr = CONFIG_SYS_FLASH_BASE; - ushort data; - ulong dflg; - - if (argc > 1) { - dflg = simple_strtoul(argv[1], NULL, 16); - faddr |= (dflg << 21); - gpio_cfi_flash_swizzle((void *)faddr); - } else { - data = bfin_read_PORTHIO(); - printf("Port H data %04x (PH0:%i)\n", data, !!(data & PH0)); - } - - return 0; -} - -U_BOOT_CMD(ph, 3, 0, do_ph, - "set/clear PH0 GPIO flash bank switch\n", - "<ph0> - set PH0 GPIO pin state\n"); diff --git a/board/cm-bf537u/gpio_cfi_flash.c b/board/cm-bf537u/gpio_cfi_flash.c index 68633ec..416c689 100644 --- a/board/cm-bf537u/gpio_cfi_flash.c +++ b/board/cm-bf537u/gpio_cfi_flash.c @@ -8,10 +8,11 @@ #include <common.h> #include <asm/blackfin.h> +#include <asm/gpio.h> #include <asm/io.h> #include "gpio_cfi_flash.h" -#define GPIO_PIN_1 PH0 +#define GPIO_PIN_1 GPIO_PH0 #define GPIO_MASK_1 (1 << 21) #define GPIO_MASK (GPIO_MASK_1) @@ -19,16 +20,10 @@ void *gpio_cfi_flash_swizzle(void *vaddr) { unsigned long addr = (unsigned long)vaddr; - if (addr & GPIO_MASK_1) - bfin_write_PORTHIO_SET(GPIO_PIN_1); - else - bfin_write_PORTHIO_CLEAR(GPIO_PIN_1); + gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1); #ifdef GPIO_MASK_2 - if (addr & GPIO_MASK_2) - bfin_write_PORTGIO_SET(GPIO_PIN_2); - else - bfin_write_PORTGIO_CLEAR(GPIO_PIN_2); + gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2); #endif SSYNC(); @@ -55,6 +50,9 @@ MAKE_FLASH(64, q) /* flash_write64() flash_read64() */ void gpio_cfi_flash_init(void) { - bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() | GPIO_PIN_1); + gpio_request(GPIO_PIN_1, "gpio_cfi_flash"); +#ifdef GPIO_MASK_2 + gpio_request(GPIO_PIN_2, "gpio_cfi_flash"); +#endif gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE); } diff --git a/board/cm-bf548/cm-bf548.c b/board/cm-bf548/cm-bf548.c index 3627586..90ce4c3 100644 --- a/board/cm-bf548/cm-bf548.c +++ b/board/cm-bf548/cm-bf548.c @@ -11,6 +11,7 @@ #include <command.h> #include <netdev.h> #include <asm/blackfin.h> +#include <asm/portmux.h> DECLARE_GLOBAL_DATA_PTR; @@ -23,53 +24,13 @@ int checkboard(void) int board_early_init_f(void) { - /* Port H: PH8 - PH13 == A4 - A9 - * address lines of the parallel asynchronous memory interface - */ - - /************************************************ - * configure GPIO * - * set port H function enable register * - * configure PH8-PH13 as peripheral (not GPIO) * - *************************************************/ - bfin_write_PORTH_FER(0x3F03); - - /************************************************ - * set port H MUX to configure PH8-PH13 * - * 1st Function (MUX = 00) (bits 16-27 == 0) * - * Set to address signals A4-A9 * - *************************************************/ - bfin_write_PORTH_MUX(0); - - /************************************************ - * set port H direction register * - * enable PH8-PH13 as outputs * - *************************************************/ - bfin_write_PORTH_DIR_SET(0x3F00); - - /* Port I: PI0 - PH14 == A10 - A24 - * address lines of the parallel asynchronous memory interface - */ - - /************************************************ - * set port I function enable register * - * configure PI0-PI14 as peripheral (not GPIO) * - *************************************************/ - bfin_write_PORTI_FER(0x7fff); - - /************************************************** - * set PORT I MUX to configure PI14-PI0 as * - * 1st Function (MUX=00) - address signals A10-A24 * - ***************************************************/ - bfin_write_PORTI_MUX(0); - - /**************************************** - * set PORT I direction register * - * enable PI0 - PI14 as outputs * - *****************************************/ - bfin_write_PORTI_DIR_SET(0x7fff); - - return 0; + /* Set async addr lines as peripheral */ + const unsigned short pins[] = { + P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, + P_A21, P_A22, P_A23, P_A24, 0 + }; + return peripheral_request_list(pins, "async"); } int board_eth_init(bd_t *bis) diff --git a/board/cm-bf548/video.c b/board/cm-bf548/video.c index 4097f09..d43f5a1 100644 --- a/board/cm-bf548/video.c +++ b/board/cm-bf548/video.c @@ -11,6 +11,8 @@ #include <config.h> #include <malloc.h> #include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> #include <i2c.h> #include <linux/types.h> @@ -174,28 +176,21 @@ void Init_DMA(void *dst) void Init_Ports(void) { - *pPORTF_MUX = 0x00000000; - *pPORTF_FER |= 0xFFFF; /* PPI0..15 */ - - *pPORTG_MUX &= - ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | - PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK); - *pPORTG_FER |= PG0 | PG1 | PG2 | PG3 | PG4; /* CLK, FS1, FS2, PPI16..17 */ - + const unsigned short pins[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4, + P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9, + P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, + P_PPI0_D15, P_PPI0_D16, P_PPI0_D17, #if !defined(CONFIG_VIDEO_RGB666) - *pPORTD_MUX &= - ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | - PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK); - *pPORTD_MUX |= - (PORT_x_MUX_0_FUNC_4 | PORT_x_MUX_1_FUNC_4 | PORT_x_MUX_2_FUNC_4 | - PORT_x_MUX_3_FUNC_4 | PORT_x_MUX_4_FUNC_4 | PORT_x_MUX_5_FUNC_4); - *pPORTD_FER |= PD0 | PD1 | PD2 | PD3 | PD4 | PD5; /* PPI18..23 */ + P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, + P_PPI0_D23, #endif + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0, + }; + peripheral_request_list(pins, "lcd"); - *pPORTE_FER &= ~PE3; /* DISP */ - *pPORTE_DIR_SET = PE3; - *pPORTE_SET = PE3; - + gpio_request(GPIO_PE3, "lcd-disp"); + gpio_direction_output(GPIO_PE3, 1); } void EnableDMA(void) diff --git a/board/colibri_pxa270/Makefile b/board/colibri_pxa270/Makefile new file mode 100644 index 0000000..44d73cc --- /dev/null +++ b/board/colibri_pxa270/Makefile @@ -0,0 +1,45 @@ +# +# Toradex Colibri PXA270 Support +# +# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := colibri_pxa270.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/colibri_pxa270/colibri_pxa270.c b/board/colibri_pxa270/colibri_pxa270.c new file mode 100644 index 0000000..d3822f0 --- /dev/null +++ b/board/colibri_pxa270/colibri_pxa270.c @@ -0,0 +1,118 @@ +/* + * Toradex Colibri PXA270 Support + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ + +/* + * Miscelaneous platform dependent initialisations + */ +extern struct serial_device serial_ffuart_device; +extern struct serial_device serial_btuart_device; +extern struct serial_device serial_stuart_device; + +struct serial_device *default_serial_console (void) +{ + return &serial_ffuart_device; +} + +int board_init (void) +{ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of vpac270 */ + gd->bd->bi_arch_number = MACH_TYPE_COLIBRI; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + return 0; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#ifdef CONFIG_CMD_USB +int usb_board_init(void) +{ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + UHCHR |= UHCHR_FSBIR; + + while (UHCHR & UHCHR_FSBIR); + + UHCHR &= ~UHCHR_SSE; + UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + + /* Clear any OTG Pin Hold */ + if (PSSR & PSSR_OTGPH) + PSSR |= PSSR_OTGPH; + + UHCRHDA &= ~(0x200); + UHCRHDA |= 0x100; + + /* Set port power control mask bits, only 3 ports. */ + UHCRHDB |= (0x7<<17); + + /* enable port 2 */ + UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + return 0; +} + +void usb_board_init_fail(void) +{ + return; +} + +void usb_board_stop(void) +{ + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCCOMS |= 1; + udelay(10); + + CKEN &= ~CKEN10_USBHOST; + + return; +} +#endif + +#ifdef CONFIG_DRIVER_DM9000 +int board_eth_init(bd_t *bis) +{ + return dm9000_initialize(bis); +} +#endif diff --git a/board/colibri_pxa270/config.mk b/board/colibri_pxa270/config.mk new file mode 100644 index 0000000..1d650ac --- /dev/null +++ b/board/colibri_pxa270/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xa1000000 diff --git a/board/colibri_pxa270/lowlevel_init.S b/board/colibri_pxa270/lowlevel_init.S new file mode 100644 index 0000000..a43dac2 --- /dev/null +++ b/board/colibri_pxa270/lowlevel_init.S @@ -0,0 +1,36 @@ +/* + * Toradex Colibri PXA270 Lowlevel Hardware Initialization + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/macro.h> + +.globl lowlevel_init +lowlevel_init: + pxa_gpio_setup + pxa_wait_ticks 0x8000 + pxa_mem_setup + pxa_wakeup + pxa_intr_setup + pxa_clock_setup + + mov pc, lr diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c index 57506d6..6baa860 100644 --- a/board/davinci/da8xxevm/da830evm.c +++ b/board/davinci/da8xxevm/da830evm.c @@ -45,63 +45,63 @@ DECLARE_GLOBAL_DATA_PTR; -#define pinmux &davinci_syscfg_regs->pinmux +#define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) /* SPI0 pin muxer settings */ static const struct pinmux_config spi0_pins[] = { - { pinmux[7], 1, 3 }, - { pinmux[7], 1, 4 }, - { pinmux[7], 1, 5 }, - { pinmux[7], 1, 6 }, - { pinmux[7], 1, 7 } + { pinmux(7), 1, 3 }, + { pinmux(7), 1, 4 }, + { pinmux(7), 1, 5 }, + { pinmux(7), 1, 6 }, + { pinmux(7), 1, 7 } }; /* EMIF-A bus pins for 8-bit NAND support on CS3 */ static const struct pinmux_config emifa_nand_pins[] = { - { pinmux[13], 1, 6 }, - { pinmux[13], 1, 7 }, - { pinmux[14], 1, 0 }, - { pinmux[14], 1, 1 }, - { pinmux[14], 1, 2 }, - { pinmux[14], 1, 3 }, - { pinmux[14], 1, 4 }, - { pinmux[14], 1, 5 }, - { pinmux[15], 1, 7 }, - { pinmux[16], 1, 0 }, - { pinmux[18], 1, 1 }, - { pinmux[18], 1, 4 }, - { pinmux[18], 1, 5 }, + { pinmux(13), 1, 6 }, + { pinmux(13), 1, 7 }, + { pinmux(14), 1, 0 }, + { pinmux(14), 1, 1 }, + { pinmux(14), 1, 2 }, + { pinmux(14), 1, 3 }, + { pinmux(14), 1, 4 }, + { pinmux(14), 1, 5 }, + { pinmux(15), 1, 7 }, + { pinmux(16), 1, 0 }, + { pinmux(18), 1, 1 }, + { pinmux(18), 1, 4 }, + { pinmux(18), 1, 5 }, }; /* EMAC PHY interface pins */ static const struct pinmux_config emac_pins[] = { - { pinmux[9], 0, 5 }, - { pinmux[10], 2, 1 }, - { pinmux[10], 2, 2 }, - { pinmux[10], 2, 3 }, - { pinmux[10], 2, 4 }, - { pinmux[10], 2, 5 }, - { pinmux[10], 2, 6 }, - { pinmux[10], 2, 7 }, - { pinmux[11], 2, 0 }, - { pinmux[11], 2, 1 }, + { pinmux(9), 0, 5 }, + { pinmux(10), 2, 1 }, + { pinmux(10), 2, 2 }, + { pinmux(10), 2, 3 }, + { pinmux(10), 2, 4 }, + { pinmux(10), 2, 5 }, + { pinmux(10), 2, 6 }, + { pinmux(10), 2, 7 }, + { pinmux(11), 2, 0 }, + { pinmux(11), 2, 1 }, }; /* UART pin muxer settings */ static const struct pinmux_config uart_pins[] = { - { pinmux[8], 2, 7 }, - { pinmux[9], 2, 0 } + { pinmux(8), 2, 7 }, + { pinmux(9), 2, 0 } }; /* I2C pin muxer settings */ static const struct pinmux_config i2c_pins[] = { - { pinmux[8], 2, 3 }, - { pinmux[8], 2, 4 } + { pinmux(8), 2, 3 }, + { pinmux(8), 2, 4 } }; /* USB0_DRVVBUS pin muxer settings */ static const struct pinmux_config usb_pins[] = { - { pinmux[9], 1, 1 } + { pinmux(9), 1, 1 } }; static const struct pinmux_resource pinmuxes[] = { diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 959b2c6..eeb456c 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -30,28 +30,28 @@ DECLARE_GLOBAL_DATA_PTR; -#define pinmux (&davinci_syscfg_regs->pinmux) +#define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) /* SPI0 pin muxer settings */ static const struct pinmux_config spi1_pins[] = { - { pinmux[5], 1, 1 }, - { pinmux[5], 1, 2 }, - { pinmux[5], 1, 4 }, - { pinmux[5], 1, 5 } + { pinmux(5), 1, 1 }, + { pinmux(5), 1, 2 }, + { pinmux(5), 1, 4 }, + { pinmux(5), 1, 5 } }; /* UART pin muxer settings */ static const struct pinmux_config uart_pins[] = { - { pinmux[0], 4, 6 }, - { pinmux[0], 4, 7 }, - { pinmux[4], 2, 4 }, - { pinmux[4], 2, 5 } + { pinmux(0), 4, 6 }, + { pinmux(0), 4, 7 }, + { pinmux(4), 2, 4 }, + { pinmux(4), 2, 5 } }; /* I2C pin muxer settings */ static const struct pinmux_config i2c_pins[] = { - { pinmux[4], 2, 2 }, - { pinmux[4], 2, 3 } + { pinmux(4), 2, 2 }, + { pinmux(4), 2, 3 } }; static const struct pinmux_resource pinmuxes[] = { diff --git a/board/digsy_mtc/cmd_mtc.c b/board/digsy_mtc/cmd_mtc.c index 621980d..ba0c367 100644 --- a/board/digsy_mtc/cmd_mtc.c +++ b/board/digsy_mtc/cmd_mtc.c @@ -75,10 +75,8 @@ static int do_mtc_led(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int err; int i; - if (argc < 2) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 2) + return cmd_usage(cmdtp); memset(&pcmd, 0, sizeof(pcmd)); memset(&prx, 0, sizeof(prx)); @@ -149,10 +147,8 @@ static int do_mtc_digout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv int err; uchar channel_mask = 0; - if (argc < 3) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strncmp(argv[1], "on", 2) == 0) channel_mask |= 1; @@ -178,10 +174,8 @@ static int do_mtc_digin(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ int err; uchar channel_num = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 2) + return cmd_usage(cmdtp); channel_num = simple_strtol(argv[1], NULL, 10); if ((channel_num != 1) && (channel_num != 2)) { @@ -332,8 +326,7 @@ int cmd_mtc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return c->cmd(c, flag, argc, argv); } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return err; diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 9109b64..3dfbf3b 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -345,10 +345,8 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_VIDEO_SM501 char *str; #endif - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index aa74376..4946538 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -221,9 +221,7 @@ int do_pci9054 (cmd_tbl_t * cmdtp, int flag, int argc, return 0; } - cmd_usage(cmdtp); - return 1; - + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index b0ebad7..96698e7 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -105,7 +105,7 @@ int misc_init_r() { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0); + clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0); return 0; } diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index af8a4a2..61b6c33 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -200,13 +200,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index df289aa..2d48d7e 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -42,6 +42,10 @@ COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8555CDS) += cds_pci_ft.o +COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o +COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o +COBJS-$(CONFIG_P1022DS) += ics307_clk.o +COBJS-$(CONFIG_P2020DS) += ics307_clk.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c new file mode 100644 index 0000000..89d8810 --- /dev/null +++ b/board/freescale/common/ics307_clk.c @@ -0,0 +1,88 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +#include "ics307_clk.h" + +#ifdef CONFIG_FSL_NGPIXIS +#include "ngpixis.h" +#else +#include "pixis.h" +#endif + +/* decode S[0-2] to Output Divider (OD) */ +static u8 ics307_s_to_od[] = { + 10, 2, 8, 4, 5, 7, 3, 6 +}; + +/* + * Calculate frequency being generated by ICS307-02 clock chip based upon + * the control bytes being programmed into it. + */ +static unsigned long ics307_clk_freq(u8 cw0, u8 cw1, u8 cw2) +{ + const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ; + unsigned long vdw = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); + unsigned long rdw = cw2 & 0x7F; + unsigned long od = ics307_s_to_od[cw0 & 0x7]; + unsigned long freq; + + /* + * CLK1 Freq = Input Frequency * 2 * (VDW + 8) / ((RDW + 2) * OD) + * + * cw0: C1 C0 TTL F1 F0 S2 S1 S0 + * cw1: V8 V7 V6 V5 V4 V3 V2 V1 + * cw2: V0 R6 R5 R4 R3 R2 R1 R0 + * + * R6:R0 = Reference Divider Word (RDW) + * V8:V0 = VCO Divider Word (VDW) + * S2:S0 = Output Divider Select (OD) + * F1:F0 = Function of CLK2 Output + * TTL = duty cycle + * C1:C0 = internal load capacitance for cyrstal + * + */ + + freq = input_freq * 2 * (vdw + 8) / ((rdw + 2) * od); + + debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2, + freq); + return freq; +} + +unsigned long get_board_sys_clk(void) +{ + return ics307_clk_freq( + in_8(&pixis->sclk[0]), + in_8(&pixis->sclk[1]), + in_8(&pixis->sclk[2])); +} + +unsigned long get_board_ddr_clk(void) +{ + return ics307_clk_freq( + in_8(&pixis->dclk[0]), + in_8(&pixis->dclk[1]), + in_8(&pixis->dclk[2])); +} diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h new file mode 100644 index 0000000..db3dbc4 --- /dev/null +++ b/board/freescale/common/ics307_clk.h @@ -0,0 +1,30 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ICS_CLK_H_ +#define __ICS_CLK_H_ 1 + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(void); +extern unsigned long get_board_ddr_clk(void); +#endif + +#endif /* __ICS_CLK_H_ */ diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h index 3c59ea8..089408b 100644 --- a/board/freescale/common/ngpixis.h +++ b/board/freescale/common/ngpixis.h @@ -45,7 +45,7 @@ typedef struct ngpixis { u8 sw; u8 en; } s[8]; -} ngpixis_t __attribute__ ((aligned(1))); +} __attribute__ ((packed)) ngpixis_t; /* Pointer to the PIXIS register set */ #define pixis ((ngpixis_t *)PIXIS_BASE) diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h new file mode 100644 index 0000000..7f86de7 --- /dev/null +++ b/board/freescale/common/pixis.h @@ -0,0 +1,182 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __PIXIS_H_ +#define __PIXIS_H_ 1 + +/* PIXIS register set. */ +#if defined(CONFIG_MPC8536DS) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 rst2; + u8 aux1; + u8 spd; + u8 aux2; + u8 csr2; + u8 watch; + u8 led; + u8 pwr; + u8 res[3]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[3]; + u8 sclk[3]; + u8 dclk[3]; + u8 i2cdacr; + u8 vcoreacc[4]; + u8 vcorecnt[3]; + u8 vcoremax[2]; + u8 vplatacc[4]; + u8 vplatcnt[3]; + u8 vplatmax[2]; + u8 vtempacc[4]; + u8 vtempcnt[3]; + u8 vtempmax[2]; + u8 res2[4]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8544DS) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 pwr; + u8 aux1; + u8 spd; + u8 res[8]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[2]; + u8 vclkh; + u8 vclkl; + u8 watch; + u8 led; + u8 vspeed2; + u8 res2[34]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8572DS) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 pwr1; + u8 aux1; + u8 spd; + u8 aux2; + u8 res[7]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[3]; + u8 res2[2]; + u8 sclk[3]; + u8 dclk[3]; + u8 res3[2]; + u8 watch; + u8 led; + u8 res4[25]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8610HPCD) +typedef struct pixis { + u8 id; + u8 ver; /* also called arch */ + u8 pver; + u8 csr; + u8 rst; + u8 pwr; + u8 aux; + u8 spd; + u8 brdcfg0; + u8 brdcfg1; + u8 res[4]; + u8 led; + u8 serno; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[2]; + u8 res2; + u8 sclk[3]; + u8 res3; + u8 watch; + u8 res4[33]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8641HPCN) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 pwr; + u8 aux; + u8 spd; + u8 res[8]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[2]; + u8 vclkh; + u8 vclkl; + u8 watch; + u8 res3[36]; +} __attribute__ ((packed)) pixis_t; +#else +#error Need to define pixis_t for this board +#endif + +/* Pointer to the PIXIS register set */ +#define pixis ((pixis_t *)PIXIS_BASE) + +#endif /* __PIXIS_H_ */ diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 5a8f4f5..3929ad0 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -351,8 +351,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) prog_eeprom(); break; default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } return 0; @@ -388,8 +387,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; case 'h': /* help */ default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } return 0; diff --git a/board/altera/ep1s10/Makefile b/board/freescale/mpc8308rdb/Makefile index acad2aa..e9bfa2b 100644 --- a/board/altera/ep1s10/Makefile +++ b/board/freescale/mpc8308rdb/Makefile @@ -1,6 +1,8 @@ # -# (C) Copyright 2001-2006 +# (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# (C) Copyright 2010 +# Ilya Yanok, Emcraft Systems, yanok@emcraft.com # # See file CREDITS for list of people who contributed to this # project. @@ -22,15 +24,10 @@ # include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif LIB = $(obj)lib$(BOARD).a -COMOBJS := ../common/AMDLV065D.o ../common/epled.o - -COBJS := $(BOARD).o $(COMOBJS) +COBJS := $(BOARD).o sdram.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8308rdb/config.mk b/board/freescale/mpc8308rdb/config.mk new file mode 100644 index 0000000..f768264 --- /dev/null +++ b/board/freescale/mpc8308rdb/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xFE000000 diff --git a/board/freescale/mpc8308rdb/mpc8308rdb.c b/board/freescale/mpc8308rdb/mpc8308rdb.c new file mode 100644 index 0000000..a864189 --- /dev/null +++ b/board/freescale/mpc8308rdb/mpc8308rdb.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <hwconfig.h> +#include <i2c.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <pci.h> +#include <mpc83xx.h> +#include <vsc7385.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_mpc83xx_serdes.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + + if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF) + gd->flags |= GD_FLG_SILENT; + + return 0; +} + +static u8 read_board_info(void) +{ + u8 val8; + i2c_set_bus_num(0); + + if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0) + return val8; + else + return 0; +} + +int checkboard(void) +{ + static const char * const rev_str[] = { + "1.0", + "<reserved>", + "<reserved>", + "<reserved>", + "<unknown>", + }; + u8 info; + int i; + + info = read_board_info(); + i = (!info) ? 4 : info & 0x03; + + printf("Board: Freescale MPC8308RDB Rev %s\n", rev_str[i]); + + return 0; +} + +static struct pci_region pcie_regions_0[] = { + { + .bus_start = CONFIG_SYS_PCIE1_MEM_BASE, + .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS, + .size = CONFIG_SYS_PCIE1_MEM_SIZE, + .flags = PCI_REGION_MEM, + }, + { + .bus_start = CONFIG_SYS_PCIE1_IO_BASE, + .phys_start = CONFIG_SYS_PCIE1_IO_PHYS, + .size = CONFIG_SYS_PCIE1_IO_SIZE, + .flags = PCI_REGION_IO, + }, +}; + +void pci_init_board(void) +{ + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + sysconf83xx_t *sysconf = &immr->sysconf; + clk83xx_t *clk = (clk83xx_t *)&immr->clk; + law83xx_t *pcie_law = sysconf->pcielaw; + struct pci_region *pcie_reg[] = { pcie_regions_0 }; + + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + + clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM , + SCCR_PCIEXP1CM_1); + + /* Deassert the resets in the control register */ + out_be32(&sysconf->pecr1, 0xE0008000); + udelay(2000); + + /* Configure PCI Express Local Access Windows */ + out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR); + out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); + + mpc83xx_pcie_init(1, pcie_reg, 0); +} +/* + * Miscellaneous late-boot configurations + * + * If a VSC7385 microcode image is present, then upload it. +*/ +int misc_init_r(void) +{ +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + return 1; + } +#endif + + return 0; +} +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + fdt_fixup_dr_usb(blob, bd); +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rv, num_if = 0; + + /* Initialize TSECs first */ + if ((rv = cpu_eth_init(bis)) >= 0) + num_if += rv; + else + printf("ERROR: failed to initialize TSECs.\n"); + + if ((rv = pci_eth_init(bis)) >= 0) + num_if += rv; + else + printf("ERROR: failed to initialize PCI Ethernet.\n"); + + return num_if; +} diff --git a/board/freescale/mpc8308rdb/sdram.c b/board/freescale/mpc8308rdb/sdram.c new file mode 100644 index 0000000..939c1b8 --- /dev/null +++ b/board/freescale/mpc8308rdb/sdram.c @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * Authors: Nick.Spence@freescale.com + * Wilson.Lo@freescale.com + * scottwood@freescale.com + * + * This files is mostly identical to the original from + * board\freescale\mpc8315erdb\sdram.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc83xx.h> + +#include <asm/bitops.h> +#include <asm/io.h> + +#include <asm/processor.h> + +DECLARE_GLOBAL_DATA_PTR; + +static void resume_from_sleep(void) +{ + u32 magic = *(u32 *)0; + + typedef void (*func_t)(void); + func_t resume = *(func_t *)4; + + if (magic == 0xf5153ae5) + resume(); + + gd->flags &= ~GD_FLG_SILENT; + puts("\nResume from sleep failed: bad magic word\n"); +} + +/* Fixed sdram init -- doesn't use serial presence detect. + * + * This is useful for faster booting in configs where the RAM is unlikely + * to be changed, or for things like NAND booting where space is tight. + */ +static long fixed_sdram(void) +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + out_be32(&im->sysconf.ddrlaw[0].bar, + CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000); + out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); + out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + udelay(50000); + + out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); + out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); + + /* Currently we use only one CS, so disable the other bank. */ + out_be32(&im->ddr.cs_config[1], 0); + + out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); + out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); + out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); + out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); + out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); + + if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF) { + out_be32(&im->ddr.sdram_cfg, + CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI); + } else { + out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); + } + + out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); + out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); + out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); + + out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); + sync(); + + /* enable DDR controller */ + setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); + sync(); + + return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); +} + +phys_size_t initdram(int board_type) +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize; + + if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM */ + msize = fixed_sdram(); + + if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF) + resume_from_sleep(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 0c4fd68..7aede13 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -110,7 +110,7 @@ static long fixed_sdram(void) phys_size_t initdram(int board_type) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 61d1249..365ac37 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -192,7 +192,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; /* diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 7da39f1..5647579 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -221,15 +221,14 @@ int misc_init_f(void) 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 }; volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; - lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM; - lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM; + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 */ - lbus->mamr = 0x08404440; + immap->im_lbc.mamr = 0x08404440; upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 4f55732..59ada9c 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -280,7 +280,7 @@ int checkboard(void) static int sdram_init(unsigned int base) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + fsl_lbc_t *lbc = LBC_BASE_ADDR; const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024; int rem = base % sdram_size; uint *sdram_addr; @@ -293,8 +293,8 @@ static int sdram_init(unsigned int base) /* * Setup SDRAM Base and Option Registers */ - immap->lbus.bank[2].br = base | CONFIG_SYS_BR2; - immap->lbus.bank[2].or = CONFIG_SYS_OR2; + set_lbc_br(2, base | CONFIG_SYS_BR2); + set_lbc_or(2, CONFIG_SYS_OR2); immap->sysconf.lblaw[2].bar = base; immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2; diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index 9ffffb4..92d56a3 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -82,9 +82,9 @@ static struct fsl_upm_nand fun = { int board_nand_init(struct nand_chip *nand) { - fun.upm.mxmr = &im->lbus.mamr; - fun.upm.mdr = &im->lbus.mdr; - fun.upm.mar = &im->lbus.mar; + fun.upm.mxmr = &im->im_lbc.mamr; + fun.upm.mdr = &im->im_lbc.mdr; + fun.upm.mar = &im->im_lbc.mar; upm_setup(&fun.upm); diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 1968106..c8e0856 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -350,154 +350,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char -ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VSYSCLK0), - in_8(pixis_base + PIXIS_VSYSCLK1), - in_8(pixis_base + PIXIS_VSYSCLK2) - ); -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VDDRCLK0), - in_8(pixis_base + PIXIS_VDDRCLK1), - in_8(pixis_base + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET @@ -544,26 +396,8 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#else - ft_fsl_pci_setup(blob, "pci0", NULL); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#else - ft_fsl_pci_setup(blob, "pci1", NULL); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#else - ft_fsl_pci_setup(blob, "pci2", NULL); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci3", &pcie3_hose); -#else - ft_fsl_pci_setup(blob, "pci3", NULL); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 9e3f677..f9ff827 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -117,7 +117,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -176,7 +176,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); @@ -185,8 +185,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index c30d966..0580fe7 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,16 +352,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 0be2d89..da3a2b6 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -40,7 +40,7 @@ int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); u8 vboot; u8 *pixis_base = (u8 *)PIXIS_BASE; @@ -360,19 +360,8 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + FT_FSL_PCI_SETUP; -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie3_hose); -#endif -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci3", &pcie2_hose); -#endif #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index aa3f32b..23e552b 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc. + * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * @@ -118,7 +118,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -154,7 +154,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -166,16 +166,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); @@ -393,11 +388,6 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) void ft_pci_setup(void *blob, bd_t *bd) { -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index ecddd0d..b7e0e0c 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,12 +352,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 2bca0f2..489f90b 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -322,7 +322,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -381,7 +381,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); @@ -390,8 +390,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 4ec13a9..bd859e4 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * @@ -181,7 +181,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -214,7 +214,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; @@ -225,16 +225,13 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); asm("msync"); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); @@ -429,11 +426,6 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 1eddeef..01b7dcb 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor. + * Copyright 2009-2010 Freescale Semiconductor. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * @@ -308,7 +308,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -635,9 +635,8 @@ void ft_board_setup(void *blob, bd_t *bd) #endif ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; + fdt_board_fixup_esdhc(blob, bd); fdt_board_fixup_qe_uart(blob, bd); fdt_board_fixup_qe_usb(blob, bd); diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 6029a51..6b96dfc 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -284,149 +284,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VSYSCLK0), - in_8(pixis_base + PIXIS_VSYSCLK1), - in_8(pixis_base + PIXIS_VSYSCLK2) - ); -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VDDRCLK0), - in_8(pixis_base + PIXIS_VDDRCLK1), - in_8(pixis_base + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { @@ -488,15 +345,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 2ef7b23..6578f58 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -309,15 +309,7 @@ ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci2", &pcie2_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 0b7f787..781a7c8 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -115,10 +115,8 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp, { unsigned int addr; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (!strncmp(argv[1],"init",4)) { #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c index bd357b8..8c8ce95 100644 --- a/board/freescale/mpc8641hpcn/law.c +++ b/board/freescale/mpc8641hpcn/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -32,14 +32,14 @@ * * 0x0000_0000 0x7fff_ffff DDR 2G * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0x8000_0000 0x9fff_ffff PCIE1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCIE2 MEM 512M * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) * 0x8000_0000 0x9fff_ffff RapidIO 512M * endif * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT) - * 0xffc0_0000 0xffc0_ffff PCI1 IO 64K - * 0xffc1_0000 0xffc1_ffff PCI2 IO 64K + * 0xffc0_0000 0xffc0_ffff PCIE1 IO 64K + * 0xffc1_0000 0xffc1_ffff PCIE2 IO 64K * 0xffe0_0000 0xffef_ffff CCSRBAR 1M * 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K * 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M @@ -54,10 +54,10 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), #endif #ifdef CONFIG_PCI - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), #elif defined(CONFIG_RIO) SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), #endif diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index b352c33..d86ca12 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2007 Freescale Semiconductor. + * Copyright 2006, 2007, 2010 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -129,21 +129,21 @@ fixed_sdram(void) #if defined(CONFIG_PCI) -static struct pci_controller pci1_hose; +static struct pci_controller pcie1_hose; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif /* CONFIG_PCIE2 */ int first_free_busno = 0; void pci_init_board(void) { -#ifdef CONFIG_PCI1 +#ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - struct pci_controller *hose = &pci1_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; + struct pci_controller *hose = &pcie1_hose; struct pci_region *r = hose->regions; volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -169,16 +169,16 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BUS, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, + CONFIG_SYS_PCIE1_MEM_BUS, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BUS, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, + CONFIG_SYS_PCIE1_IO_BUS, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -195,8 +195,8 @@ void pci_init_board(void) * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. */ - in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT - + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000))); + in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT + + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000))); } else { puts("PCI-EXPRESS 1: Disabled\n"); @@ -204,26 +204,26 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS1: Disabled\n"); -#endif /* CONFIG_PCI1 */ +#endif /* CONFIG_PCIE1 */ -#ifdef CONFIG_PCI2 +#ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; - struct pci_controller *hose = &pci2_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; + struct pci_controller *hose = &pcie2_hose; struct pci_region *r = hose->regions; /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI2_MEM_BUS, - CONFIG_SYS_PCI2_MEM_PHYS, - CONFIG_SYS_PCI2_MEM_SIZE, + CONFIG_SYS_PCIE2_MEM_BUS, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI2_IO_BUS, - CONFIG_SYS_PCI2_IO_PHYS, - CONFIG_SYS_PCI2_IO_SIZE, + CONFIG_SYS_PCIE2_IO_BUS, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -238,7 +238,7 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS 2: Disabled\n"); -#endif /* CONFIG_PCI2 */ +#endif /* CONFIG_PCIE2 */ } @@ -253,12 +253,7 @@ ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCI2 - ft_fsl_pci_setup(blob, "pci1", &pci2_hose); -#endif + FT_FSL_PCI_SETUP; /* * Warn if it looks like the device tree doesn't match u-boot. diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile new file mode 100644 index 0000000..8ede2d6 --- /dev/null +++ b/board/freescale/p1022ds/Makefile @@ -0,0 +1,39 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p1022ds/config.mk b/board/freescale/p1022ds/config.mk new file mode 100644 index 0000000..4581d20 --- /dev/null +++ b/board/freescale/p1022ds/config.mk @@ -0,0 +1,14 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +ifndef TEXT_BASE +TEXT_BASE = 0xeff80000 +endif + +RESET_VECTOR_ADDRESS = 0xeffffffc diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c new file mode 100644 index 0000000..7ecfb3e --- /dev/null +++ b/board/freescale/p1022ds/ddr.c @@ -0,0 +1,106 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, unsigned int ctrl_num) +{ + int ret; + + /* + * The P1022 has only one DDR controller, and the board has only one + * DIMM slot. + */ + ret = i2c_read(SPD_EEPROM_ADDRESS1, 0, 1, (u8 *)ctrl_dimms_spd, + sizeof(ddr3_spd_eeprom_t)); + if (ret) { + debug("DDR: failed to read SPD from address %u\n", + SPD_EEPROM_ADDRESS1); + memset(ctrl_dimms_spd, 0, sizeof(ddr3_spd_eeprom_t)); + } +} + +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; /* Range: 0-8 */ + u32 cpo; /* Range: 2-31 */ + u32 write_data_delay; /* Range: 0-6 */ + u32 force_2T; +} board_specific_parameters_t; + +static const board_specific_parameters_t bsp[] = { +/* + * lo| hi| num| clk| cpo|wrdata|2T + * mhz| mhz|ranks|adjst| | delay| + */ + { 0, 333, 1, 5, 31, 3, 0}, + {334, 400, 1, 5, 31, 3, 0}, + {401, 549, 1, 5, 31, 3, 0}, + {550, 680, 1, 5, 31, 5, 0}, + {681, 850, 1, 5, 31, 5, 0}, + { 0, 333, 2, 5, 31, 3, 0}, + {334, 400, 2, 5, 31, 3, 0}, + {401, 549, 2, 5, 31, 3, 0}, + {550, 680, 2, 5, 31, 5, 0}, + {681, 850, 2, 5, 31, 5, 0}, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + unsigned long ddr_freq; + unsigned int i; + + /* set odt_rd_cfg and odt_wr_cfg. */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } + + /* + * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < ARRAY_SIZE(bsp); i++) { + if (ddr_freq >= bsp[i].datarate_mhz_low && + ddr_freq <= bsp[i].datarate_mhz_high && + pdimm->n_ranks == bsp[i].n_ranks) { + popts->clk_adjust = bsp[i].clk_adjust; + popts->cpo_override = bsp[i].cpo; + popts->write_data_delay = bsp[i].write_data_delay; + popts->twoT_en = bsp[i].force_2T; + break; + } + } + + popts->half_strength_driver_enable = 1; + + /* Per AN4039, enable ZQ calibration. */ + popts->zq_en = 1; + + /* + * For wake-up on ARP, we need auto self refresh enabled + */ + popts->auto_self_refresh_en = 1; + popts->sr_it = 0xb; +} diff --git a/board/freescale/p1022ds/law.c b/board/freescale/p1022ds/law.c new file mode 100644 index 0000000..b23b8f9 --- /dev/null +++ b/board/freescale/p1022ds/law.c @@ -0,0 +1,21 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c new file mode 100644 index 0000000..5cdee9f --- /dev/null +++ b/board/freescale/p1022ds/p1022ds.c @@ -0,0 +1,338 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/io.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <tsec.h> +#include <asm/fsl_law.h> +#include <asm/mp.h> +#include <netdev.h> +#include <i2c.h> + +#include "../common/ngpixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, 0x1000); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + + /* Set the pin muxing to enable ETSEC2. */ + clrbits_be32(&gur->pmuxcr2, 0x001F8000); + + return 0; +} + +int checkboard(void) +{ + u8 sw; + + puts("Board: P1022DS "); + + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); + + sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); + + switch ((sw & PIXIS_LBMAP_MASK) >> 6) { + case 0: + printf ("vBank: %u\n", ((sw & 0x30) >> 4)); + break; + case 1: + printf ("NAND\n"); + break; + case 2: + case 3: + puts ("Promjet\n"); + break; + } + + return 0; +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = 0; + + puts("Initializing....\n"); + + dram_size = fsl_ddr_sdram(); + dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000; + + puts(" DDR: "); + return dram_size; +} + +#define CONFIG_TFP410_I2C_ADDR 0x38 + +int misc_init_r(void) +{ + u8 temp; + + /* Enable the TFP410 Encoder */ + + temp = 0xBF; + if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0) + return -1; + + /* Verify if enabled */ + temp = 0; + if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0) + return -1; + + debug("DVI Encoder Read: 0x%02x\n", temp); + + temp = 0x10; + if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0) + return -1; + + /* Verify if enabled */ + temp = 0; + if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0) + return -1; + + debug("DVI Encoder Read: 0x%02x\n",temp); + + return 0; +} + +/* + * A list of PCI and SATA slots + */ +enum slot_id { + SLOT_PCIE1 = 1, + SLOT_PCIE2, + SLOT_PCIE3, + SLOT_PCIE4, + SLOT_PCIE5, + SLOT_SATA1, + SLOT_SATA2 +}; + +/* + * This array maps the slot identifiers to their names on the P1022DS board. + */ +static const char *slot_names[] = { + [SLOT_PCIE1] = "Slot 1", + [SLOT_PCIE2] = "Slot 2", + [SLOT_PCIE3] = "Slot 3", + [SLOT_PCIE4] = "Slot 4", + [SLOT_PCIE5] = "Mini-PCIe", + [SLOT_SATA1] = "SATA 1", + [SLOT_SATA2] = "SATA 2", +}; + +/* + * This array maps a given SERDES configuration and SERDES device to the PCI or + * SATA slot that it connects to. This mapping is hard-coded in the FPGA. + */ +static u8 serdes_dev_slot[][SATA2 + 1] = { + [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 }, + [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4, + [PCIE2] = SLOT_PCIE5 }, + [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3 }, + [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1c] = { [PCIE1] = SLOT_PCIE1, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 }, + [0x1f] = { [PCIE1] = SLOT_PCIE1 }, +}; + + +/* + * Returns the name of the slot to which the PCIe or SATA controller is + * connected + */ +const char *serdes_slot_name(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + enum slot_id slot = serdes_dev_slot[srds_cfg][device]; + const char *name = slot_names[slot]; + + if (name) + return name; + else + return "Nothing"; +} + +static void configure_pcie(struct fsl_pci_info *info, + struct pci_controller *hose, + const char *connected) +{ + static int bus_number = 0; + int is_endpoint; + + set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); + set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); + is_endpoint = fsl_setup_hose(hose, info->regs); + printf(" PCIE%u connected to %s as %s (base addr %lx)\n", + info->pci_num, connected, + is_endpoint ? "Endpoint" : "Root Complex", info->regs); + bus_number = fsl_pci_init_port(info, hose, bus_number); +} + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + struct fsl_pci_info pci_info; + u32 devdisr = in_be32(&gur->devdisr); + +#ifdef CONFIG_PCIE1 + if (is_serdes_configured(PCIE1) && !(devdisr & MPC85xx_DEVDISR_PCIE)) { + SET_STD_PCIE_INFO(pci_info, 1); + configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1)); + } else { + printf(" PCIE1: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + if (is_serdes_configured(PCIE2) && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { + SET_STD_PCIE_INFO(pci_info, 2); + configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2)); + } else { + printf(" PCIE2: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ +#endif + +#ifdef CONFIG_PCIE3 + if (is_serdes_configured(PCIE3) && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { + SET_STD_PCIE_INFO(pci_info, 3); + configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3)); + } else { + printf(" PCIE3: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ +#endif +} +#endif + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + return 0; +} + +/* + * Initialize on-board and/or PCI Ethernet devices + * + * Returns: + * <0, error + * 0, no ethernet devices found + * >0, number of ethernet devices initialized + */ +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[2]; + unsigned int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + + return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); +} + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + FT_FSL_PCI_SETUP; + +#ifdef CONFIG_FSL_SGMII_RISER + fsl_sgmii_riser_fdt_fixup(blob); +#endif +} +#endif + +#ifdef CONFIG_MP +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c new file mode 100644 index 0000000..e620112 --- /dev/null +++ b/board/freescale/p1022ds/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* W**G* - Flash/promjet, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_4K, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index aa2f64c..97d4f83 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -100,16 +100,5 @@ void pci_init_board(void) void ft_pci_board_setup(void *blob) { -/* According to h/w manual, PCIE2 is at lower address(0x9000) - * than PCIE1(0xa000). - * Hence PCIE2 is made to occupy the pci1 position in dts to - * keep the addresses sorted there. - * Generally the case with all FSL SOCs. - */ -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index f0ff209..3fd1b34 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -313,155 +313,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq(unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - return gd->bus_clk; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - return gd->mem_clk; -} - -unsigned long calculate_board_sys_clk(ulong dummy) -{ - ulong val; - - val = ics307_clk_freq(in_8(&pixis->sclk[0]), in_8(&pixis->sclk[1]), - in_8(&pixis->sclk[2])); - debug("sysclk val = %lu\n", val); - return val; -} - -unsigned long calculate_board_ddr_clk(ulong dummy) -{ - ulong val; - - val = ics307_clk_freq(in_8(&pixis->dclk[0]), in_8(&pixis->dclk[1]), - in_8(&pixis->dclk[2])); - debug("ddrclk val = %lu\n", val); - return val; -} -#else -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - - i = in_8(&pixis->spd); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - - i = in_8(&pixis->spd); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { @@ -515,15 +366,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/gth/README b/board/gth/README deleted file mode 100644 index 241c70b..0000000 --- a/board/gth/README +++ /dev/null @@ -1,18 +0,0 @@ -Written by Thomas.Lange@corelatus.com 010805 - -To make a system for gth that actually works ;-) -the variable TBASE needs to be set to 0,1 or 2 -depending on location where image is supposed to -be started from. -E.g. make TBASE=1 - -0: Start from RAM, base 0 - -1: Start from flash_base + 0x10070 - -2: Start from flash_base + 0x30070 - -When using 1 or 2, the image is supposed to be launched -from miniboot that boots the first U-Boot image found in -flash. -For miniboot code, description, see www.opensource.se diff --git a/board/gth/ee_access.c b/board/gth/ee_access.c deleted file mode 100644 index 2a33a0e..0000000 --- a/board/gth/ee_access.c +++ /dev/null @@ -1,335 +0,0 @@ -/* Module for handling DALLAS DS2438, smart battery monitor - Chip can store up to 40 bytes of user data in EEPROM, - perform temp, voltage and current measurements. - Chip also contains a unique serial number. - - Always read/write LSb first - - For documentaion, see data sheet for DS2438, 2438.pdf - - By Thomas.Lange@corelatus.com 001025 */ - -#include <common.h> -#include <config.h> -#include <mpc8xx.h> - -#include <../board/gth/ee_dev.h> - -/* We dont have kernel functions */ -#define printk printf -#define KERN_DEBUG -#define KERN_ERR -#define EIO 1 - -static int Debug = 0; - -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - -/* - * lookup table ripped from DS app note 17, understanding and using - * cyclic redundancy checks... - */ - -static u8 crc_lookup[256] = { - 0, 94, 188, 226, 97, 63, 221, 131, - 194, 156, 126, 32, 163, 253, 31, 65, - 157, 195, 33, 127, 252, 162, 64, 30, - 95, 1, 227, 189, 62, 96, 130, 220, - 35, 125, 159, 193, 66, 28, 254, 160, - 225, 191, 93, 3, 128, 222, 60, 98, - 190, 224, 2, 92, 223, 129, 99, 61, - 124, 34, 192, 158, 29, 67, 161, 255, - 70, 24, 250, 164, 39, 121, 155, 197, - 132, 218, 56, 102, 229, 187, 89, 7, - 219, 133, 103, 57, 186, 228, 6, 88, - 25, 71, 165, 251, 120, 38, 196, 154, - 101, 59, 217, 135, 4, 90, 184, 230, - 167, 249, 27, 69, 198, 152, 122, 36, - 248, 166, 68, 26, 153, 199, 37, 123, - 58, 100, 134, 216, 91, 5, 231, 185, - 140, 210, 48, 110, 237, 179, 81, 15, - 78, 16, 242, 172, 47, 113, 147, 205, - 17, 79, 173, 243, 112, 46, 204, 146, - 211, 141, 111, 49, 178, 236, 14, 80, - 175, 241, 19, 77, 206, 144, 114, 44, - 109, 51, 209, 143, 12, 82, 176, 238, - 50, 108, 142, 208, 83, 13, 239, 177, - 240, 174, 76, 18, 145, 207, 45, 115, - 202, 148, 118, 40, 171, 245, 23, 73, - 8, 86, 180, 234, 105, 55, 213, 139, - 87, 9, 235, 181, 54, 104, 138, 212, - 149, 203, 41, 119, 244, 170, 72, 22, - 233, 183, 85, 11, 136, 214, 52, 106, - 43, 117, 151, 201, 74, 20, 246, 168, - 116, 42, 200, 150, 21, 75, 169, 247, - 182, 232, 10, 84, 215, 137, 107, 53 -}; - -static u8 make_new_crc( u8 Old_crc, u8 New_value ){ - /* Compute a new checksum with new byte, using previous checksum as input - See DS app note 17, understanding and using cyclic redundancy checks... - Also see DS2438, page 11 */ - return( crc_lookup[Old_crc ^ New_value ]); -} - -int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){ - /* Check if the checksum for this buffer is correct */ - u8 Curr_crc=0; - int i; - u8 *Curr_byte = Buffer; - - for(i=0;i<Len;i++){ - Curr_crc = make_new_crc( Curr_crc, *Curr_byte); - Curr_byte++; - } - E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc); - - if(Curr_crc == Crc){ - /* Good */ - return(TRUE); - } - printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n", - Curr_crc, Crc); - return(FALSE); -} - -static void -set_idle(void){ - /* Send idle and keep start time - Continous 1 is idle */ - WRITE_PORT(1); -} - -static int -do_reset(void){ - /* Release reset and verify that chip responds with presence pulse */ - int Retries = 0; - while(Retries<5){ - udelay(RESET_LOW_TIME); - - /* Send reset */ - WRITE_PORT(0); - udelay(RESET_LOW_TIME); - - /* Release reset */ - WRITE_PORT(1); - - /* Wait for EEPROM to drive output */ - udelay(PRESENCE_TIMEOUT); - if(!READ_PORT){ - /* Ok, EEPROM is driving a 0 */ - E_DEBUG("Presence detected\n"); - if(Retries){ - E_DEBUG("Retries %d\n",Retries); - } - /* Make sure chip releases pin */ - udelay(PRESENCE_LOW_TIME); - return 0; - } - Retries++; - } - - printk(KERN_ERR"EEPROM did not respond when releasing reset\n"); - - /* Make sure chip releases pin */ - udelay(PRESENCE_LOW_TIME); - - /* Set to idle again */ - set_idle(); - - return(-EIO); -} - -static u8 -read_byte(void){ - /* Read a single byte from EEPROM - Read LSb first */ - int i; - int Value; - u8 Result=0; -#ifndef CONFIG_SYS_IMMR - u32 Flags; -#endif - - E_DEBUG("Reading byte\n"); - - for(i=0;i<8;i++){ - /* Small delay between pulses */ - udelay(1); - -#ifndef CONFIG_SYS_IMMR - /* Disable irq */ - save_flags(Flags); - cli(); -#endif - - /* Pull down pin short time to start read - See page 26 in data sheet */ - - WRITE_PORT(0); - udelay(READ_LOW); - WRITE_PORT(1); - - /* Wait for chip to drive pin */ - udelay(READ_TIMEOUT); - - Value = READ_PORT; - if(Value) - Value=1; - -#ifndef CONFIG_SYS_IMMR - /* Enable irq */ - restore_flags(Flags); -#endif - - /* Wait for chip to release pin */ - udelay(TOTAL_READ_LOW-READ_TIMEOUT); - - /* LSb first */ - Result|=Value<<i; - } - - E_DEBUG("Read byte 0x%x\n",Result); - - return(Result); -} - -static void -write_byte(u8 Byte){ - /* Write a single byte to EEPROM - Write LSb first */ - int i; - int Value; -#ifndef CONFIG_SYS_IMMR - u32 Flags; -#endif - - E_DEBUG("Writing byte 0x%x\n",Byte); - - for(i=0;i<8;i++){ - /* Small delay between pulses */ - udelay(1); - Value = Byte&1; - -#ifndef CONFIG_SYS_IMMR - /* Disable irq */ - save_flags(Flags); - cli(); -#endif - - /* Pull down pin short time for a 1, long time for a 0 - See page 26 in data sheet */ - - WRITE_PORT(0); - if(Value){ - /* Write a 1 */ - udelay(WRITE_1_LOW); - } - else{ - /* Write a 0 */ - udelay(WRITE_0_LOW); - } - - WRITE_PORT(1); - -#ifndef CONFIG_SYS_IMMR - /* Enable irq */ - restore_flags(Flags); -#endif - - if(Value) - /* Wait for chip to read the 1 */ - udelay(TOTAL_WRITE_LOW-WRITE_1_LOW); - Byte>>=1; - } -} - -int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){ - /* Execute this command string, including - giving reset and setting to idle after command - if Rx_len is set, we read out data from EEPROM */ - int i; - - E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len ); - - if(do_reset()){ - /* Failed! */ - return(-EIO); - } - - if(Send_skip) - /* Always send SKIP_ROM first to tell chip we are sending a command, - except when we read out rom data for chip */ - write_byte(SKIP_ROM); - - /* Always have Tx data */ - for(i=0;i<Tx_len;i++){ - write_byte(Tx[i]); - } - - if(Rx_len){ - for(i=0;i<Rx_len;i++){ - Rx[i]=read_byte(); - } - } - - set_idle(); - - E_DEBUG("Command done\n"); - - return(0); -} - -int ee_init_data(void){ - int i; - u8 Tx[10]; - int tmp; - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - - while(0){ - tmp = 1-tmp; - if(tmp) - immap->im_ioport.iop_padat &= ~PA_FRONT_LED; - else - immap->im_ioport.iop_padat |= PA_FRONT_LED; - udelay(1); - } - - /* Set port to open drain to be able to read data from - port without setting it to input */ - PORT_B_PAR &= ~PB_EEPROM; - PORT_B_ODR |= PB_EEPROM; - SET_PORT_B_OUTPUT(PB_EEPROM); - - /* Set idle mode */ - set_idle(); - - /* Copy all User EEPROM data to scratchpad */ - for(i=0;i<USER_PAGES;i++){ - Tx[0]=RECALL_MEMORY; - Tx[1]=EE_USER_PAGE_0+i; - if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO); - } - - /* Make sure chip doesnt store measurements in NVRAM */ - Tx[0]=WRITE_SCRATCHPAD; - Tx[1]=0; /* Page */ - Tx[2]=9; - if(ee_do_command(Tx,3,NULL,0,TRUE)) return(-EIO); - - Tx[0]=COPY_SCRATCHPAD; - if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO); - - /* FIXME check status bit instead - Could take 10 ms to store in EEPROM */ - for(i=0;i<10;i++){ - udelay(1000); - } - - return(0); -} diff --git a/board/gth/ee_access.h b/board/gth/ee_access.h deleted file mode 100644 index e847f2c..0000000 --- a/board/gth/ee_access.h +++ /dev/null @@ -1,16 +0,0 @@ -/* By Thomas.Lange@Corelatus.com 001025 - - Definitions for EEPROM/VOLT METER DS2438 */ - -#ifndef INCeeaccessh -#define INCeeaccessh - -int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ); -int ee_init_data(void); -int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ); - -#ifndef TRUE -#define TRUE 1 -#endif - -#endif /* INCeeaccessh */ diff --git a/board/gth/ee_dev.h b/board/gth/ee_dev.h deleted file mode 100644 index 3004b46..0000000 --- a/board/gth/ee_dev.h +++ /dev/null @@ -1,85 +0,0 @@ -/* By Thomas.Lange@Corelatus.com 001025 - $Revision: 1.6 $ - - Definitions for EEPROM/VOLT METER DS2438 - Copyright (C) 2000-2001 Corelatus AB */ - -#ifndef INCeedevh -#define INCeedevh - -#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args) - -#define PORT_B_PAR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar -#define PORT_B_ODR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr -#define PORT_B_DIR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir -#define PORT_B_DAT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat - -#define SET_PORT_B_INPUT(Mask) PORT_B_DIR &= ~(Mask) -#define SET_PORT_B_OUTPUT(Mask) PORT_B_DIR |= Mask - -#define WRITE_PORT_B(Mask,Value) { \ - if (Value) PORT_B_DAT |= Mask; \ - else PORT_B_DAT &= ~(Mask); \ - } -#define WRITE_PORT(Value) WRITE_PORT_B(PB_EEPROM,Value) - -#define READ_PORT (PORT_B_DAT&PB_EEPROM) - -/* 64 bytes chip */ -#define EE_CHIP_SIZE 64 - -/* We use this resistor for measuring the current drain on 3.3V */ -#define CURRENT_RESISTOR 0.022 - -/* microsecs - Pull line down at least this long for reset pulse */ -#define RESET_LOW_TIME 490 - -/* Read presence pulse after we release reset pulse */ -#define PRESENCE_TIMEOUT 100 -#define PRESENCE_LOW_TIME 200 - -#define WRITE_0_LOW 80 -#define WRITE_1_LOW 2 -#define TOTAL_WRITE_LOW 80 - -#define READ_LOW 2 -#define READ_TIMEOUT 10 -#define TOTAL_READ_LOW 80 - -/*** Rom function commands ***/ -#define READ_ROM 0x33 -#define MATCH_ROM 0x55 -#define SKIP_ROM 0xCC -#define SEARCH_ROM 0xF0 - - -/*** Memory_command_function ***/ -#define WRITE_SCRATCHPAD 0x4E -#define READ_SCRATCHPAD 0xBE -#define COPY_SCRATCHPAD 0x48 -#define RECALL_MEMORY 0xB8 -#define CONVERT_TEMP 0x44 -#define CONVERT_VOLTAGE 0xB4 - -/* Chip is divided in 8 pages, 8 bytes each */ - -#define EE_PAGE_SIZE 8 - -/* All chip data we want are in page 0 */ - -/* Bytes in page 0 */ -#define EE_P0_STATUS 0 -#define EE_P0_TEMP_LSB 1 -#define EE_P0_TEMP_MSB 2 -#define EE_P0_VOLT_LSB 3 -#define EE_P0_VOLT_MSB 4 -#define EE_P0_CURRENT_LSB 5 -#define EE_P0_CURRENT_MSB 6 - - -/* 40 byte user data is located at page 3-7 */ -#define EE_USER_PAGE_0 3 -#define USER_PAGES 5 - -#endif /* INCeedevh */ diff --git a/board/gth/flash.c b/board/gth/flash.c deleted file mode 100644 index 169270b..0000000 --- a/board/gth/flash.c +++ /dev/null @@ -1,649 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - * Protection Flags: - */ -#define FLAG_PROTECT_SET 0x01 -#define FLAG_PROTECT_CLEAR 0x02 - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /*printf("faking");*/ - - return(0x1fffff); - - /* Init: no FLASHes known */ - for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) - { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - -#if 0 - if (FLASH_BASE1_PRELIM != 0x0) { - size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (size_b1 > size_b0) { - printf ("## ERROR: Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20,size_b0, size_b0<<20); - - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - } else { -#endif - size_b1 = 0; - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; - memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - if (size_b1) - { - /* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */ - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - } - else - { -/* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - FIXME memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */ - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - - return (size_b0 + size_b1); -} - - -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start adress table */ - if (info->flash_id & FLASH_BTYPE) - { - /* set sector offsets for bottom boot block type */ - for (i = 0; i < info->sector_count; i++) - { - info->start[i] = base + (i * 0x00040000); - } - } - else - { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - for (; i >= 0; i--) - { - info->start[i] = base + i * 0x00040000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - -#if 0 - case FLASH_AM040B: - printf ("AM29F040B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM040T: - printf ("AM29F040T (4 Mbit, top boot sect)\n"); - break; -#endif - case FLASH_AM400B: - printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; i<info->sector_count; ++i) - { - if ((i % 5) == 0) - { - printf ("\n "); - } - - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; -#if 0 - ulong base = (ulong)addr; -#endif - ulong value; - - /* Write auto select command: read Manufacturer ID */ -#if 0 - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; -#else - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; - addr[0x0555] = 0x90909090; -#endif - - value = addr[0]; - - switch (value) - { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - value = addr[1]; /* device ID */ - - switch (value) - { -#if 0 - case AMD_ID_F040B: - info->flash_id += FLASH_AM040B; - info->sector_count = 8; - info->size = 0x00200000; - break; /* => 2 MB */ -#endif - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - -#if 0 - /* set up sector start adress table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } -#else - flash_get_offsets ((ulong)addr, &flash_info[0]); -#endif - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) - { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) - { - addr = (volatile unsigned long *)info->start[0]; -#if 0 - *addr = 0x00F000F0; /* reset bank */ -#else - *addr = 0xF0F0F0F0; /* reset bank */ -#endif - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - -#if 0 - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; -#else - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; - addr[0x0555] = 0x80808080; - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; -#endif - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); -#if 0 - addr[0] = 0x00300030; -#else - addr[0] = 0x30303030; -#endif - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); -#if 0 - while ((addr[0] & 0x00800080) != 0x00800080) -#else - while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF) -#endif - { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; -#if 0 - addr[0] = 0x00F000F0; /* reset bank */ -#else - addr[0] = 0xF0F0F0F0; /* reset bank */ -#endif - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - -#if 0 - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; -#else - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; - addr[0x0555] = 0xA0A0A0A0; -#endif - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); -#if 0 - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) -#else - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) -#endif - { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/gth/gth.c b/board/gth/gth.c deleted file mode 100644 index 4399db2..0000000 --- a/board/gth/gth.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Adapted from FADS and other board config files to GTH by thomas@corelatus.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <watchdog.h> -#include <mpc8xx.h> -#include "ee_access.h" -#include "ee_dev.h" - -#ifdef CONFIG_BDM -#undef printf -#define printf(a,...) /* nothing */ -#endif - - -int checkboard (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - int Id = 0; - int Rev = 0; - u32 Pbdat; - - puts ("Board: "); - - /* Turn on leds and setup for reading rev and id */ - -#define PB_OUTS (PB_BLUE_LED|PB_ID_GND) -#define PB_INS (PB_ID_0|PB_ID_1|PB_ID_2|PB_ID_3|PB_REV_1|PB_REV_0) - - immap->im_cpm.cp_pbpar &= ~(PB_OUTS | PB_INS); - - immap->im_cpm.cp_pbdir &= ~PB_INS; - - immap->im_cpm.cp_pbdir |= PB_OUTS; - immap->im_cpm.cp_pbodr |= PB_OUTS; - immap->im_cpm.cp_pbdat &= ~PB_OUTS; - - /* Hold 100 Mbit in reset until fpga is loaded */ - immap->im_ioport.iop_pcpar &= ~PC_ENET100_RESET; - immap->im_ioport.iop_pcdir |= PC_ENET100_RESET; - immap->im_ioport.iop_pcso &= ~PC_ENET100_RESET; - immap->im_ioport.iop_pcdat &= ~PC_ENET100_RESET; - - /* Turn on front led to show that we are alive */ - immap->im_ioport.iop_papar &= ~PA_FRONT_LED; - immap->im_ioport.iop_padir |= PA_FRONT_LED; - immap->im_ioport.iop_paodr |= PA_FRONT_LED; - immap->im_ioport.iop_padat &= ~PA_FRONT_LED; - - Pbdat = immap->im_cpm.cp_pbdat; - - if (!(Pbdat & PB_ID_0)) - Id += 1; - if (!(Pbdat & PB_ID_1)) - Id += 2; - if (!(Pbdat & PB_ID_2)) - Id += 4; - if (!(Pbdat & PB_ID_3)) - Id += 8; - - if (Pbdat & PB_REV_0) - Rev += 1; - if (Pbdat & PB_REV_1) - Rev += 2; - - /* Turn ID off since we dont need it anymore */ - immap->im_cpm.cp_pbdat |= PB_ID_GND; - - printf ("GTH board, rev %d, id=0x%01x\n", Rev, Id); - return 0; -} - -#define _NOT_USED_ 0xffffffff -const uint sdram_table[] = { - /* Single read, offset 0 */ - 0x0f3dfc04, 0x0eefbc04, 0x01bf7c04, 0x0feafc00, - 0x1fb5fc45, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Burst read, Offset 0x8, 4 reads */ - 0x0f3dfc04, 0x0eefbc04, 0x00bf7c04, 0x00ffec00, - 0x00fffc00, 0x01eafc00, 0x1fb5fc00, 0xfffffc45, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Not used part of burst read is used for MRS, Offset 0x14 */ - 0xefeabc34, 0x1fb57c34, 0xfffffc05, _NOT_USED_, - /* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */ - - /* Single write, Offset 0x18 */ - 0x0f3dfc04, 0x0eebbc00, 0x01a27c04, 0x1fb5fc45, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Burst write, Offset 0x20. 4 writes */ - 0x0f3dfc04, 0x0eebbc00, 0x00b77c00, 0x00fffc00, - 0x00fffc00, 0x01eafc04, 0x1fb5fc45, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Not used part of burst write is used for precharge, Offset 0x2C */ - 0x0ff5fc04, 0xfffffc05, _NOT_USED_, _NOT_USED_, - /* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */ - - /* Period timer service. Offset 0x30. Refresh. Wait at least 70 ns after refresh command */ - 0x1ffd7c04, 0xfffffc04, 0xfffffc04, 0xfffffc05, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Exception, Offset 0x3C */ - 0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_ -}; - -const uint fpga_table[] = { - /* Single read, offset 0 */ - 0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04, - 0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05, - - /* Burst read, Offset 0x8 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Single write, Offset 0x18 */ - 0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04, - 0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05, - - /* Burst write, Offset 0x20. */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Period timer service. Offset 0x30. */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Exception, Offset 0x3C */ - 0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_ -}; - -int _initsdram (uint base, uint * noMbytes) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *mc = &immap->im_memctl; - volatile u32 *memptr; - - mc->memc_mptpr = MPTPR_PTP_DIV16; /* (16-17) */ - - /* SDRAM in UPMA - - GPL_0 is connected instead of A19 to SDRAM. - According to table 16-17, AMx should be 001, i.e. type 1 - and GPL_0 should hold address A10 when multiplexing */ - - mc->memc_mamr = (0x2E << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_AMA_TYPE_1 | MAMR_G0CLA_A10 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X; /* (16-13) */ - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Perform init of sdram ( Datasheet Page 9 ) - Precharge */ - mc->memc_mcr = 0x8000212C; /* run upm a at 0x2C (16-15) */ - - /* Run 2 refresh cycles */ - mc->memc_mcr = 0x80002130; /* run upm a at 0x30 (16-15) */ - mc->memc_mcr = 0x80002130; /* run upm a at 0x30 (16-15) */ - - /* Set Mode register */ - mc->memc_mar = 0x00000088; /* set mode register (address) to 0x022 (16-17) */ - /* Lower 2 bits are not connected to chip */ - mc->memc_mcr = 0x80002114; /* run upm a at 0x14 (16-15) */ - - /* CS1, base 0x0000000 - 64 Mbyte, use UPM A */ - mc->memc_or1 = 0xfc000000 | OR_CSNT_SAM; - mc->memc_br1 = BR_MS_UPMA | BR_V; /* SDRAM base always 0 */ - - /* Test if we really have 64 MB SDRAM */ - memptr = (u32 *) 0; - *memptr = 0; - - memptr = (u32 *) 0x2000000; /* First u32 in upper 32 MB */ - *memptr = 0x12345678; - - memptr = (u32 *) 0; - if (*memptr == 0x12345678) { - /* Wrapped, only have 32 MB */ - mc->memc_or1 = 0xfe000000 | OR_CSNT_SAM; - *noMbytes = 32; - } else { - /* 64 MB */ - *noMbytes = 64; - } - - /* Setup FPGA in UPMB */ - upmconfig (UPMB, (uint *) fpga_table, - sizeof (fpga_table) / sizeof (uint)); - - /* Enable UPWAITB */ - mc->memc_mbmr = MBMR_GPL_B4DIS; /* (16-13) */ - - /* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */ - mc->memc_or2 = 0xffc00000 | OR_BI; - mc->memc_br2 = FPGA_2_BASE | BR_MS_UPMB | BR_V; - - /* CS3, base FPGA_3_BASE - 4 MByte, use UPM B 16 bit */ - mc->memc_or3 = 0xffc00000 | OR_BI; - mc->memc_br3 = FPGA_3_BASE | BR_MS_UPMB | BR_V | BR_PS_16; - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -void _sdramdisable (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_br1 = 0x00000000; - - /* maybe we should turn off upmb here or something */ -} - -/* ------------------------------------------------------------------------- */ - -int initsdram (uint base, uint * noMbytes) -{ - *noMbytes = 32; - -#ifdef CONFIG_START_IN_RAM - /* SDRAM is already setup. Dont touch it */ - return 0; -#else - - if (!_initsdram (base, noMbytes)) { - - return 0; - } else { - _sdramdisable (); - - return -1; - } -#endif -} - -phys_size_t initdram (int board_type) -{ - u32 *i; - u32 j; - u32 k; - - /* GTH only have SDRAM */ - uint sdramsz; - - if (!initsdram (0x00000000, &sdramsz)) { - printf ("(%u MB SDRAM) ", sdramsz); - } else { - /******************************** - *SDRAM ERROR, HALT PROCESSOR - *********************************/ - printf ("SDRAM ERROR\n"); - while (1); - } - -#ifndef CONFIG_START_IN_RAM - -#define U32_S ((sdramsz<<18)-1) - -#if 1 - /* Do a simple memory test */ - for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) { - *i = j + (j << 17); - *(i + 1) = ~(j + (j << 18)); - } - - WATCHDOG_RESET (); - - printf ("."); - - for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) { - k = *i; - if (k != (j + (j << 17))) { - printf ("Mem test error, i=0x%x, 0x%x\n, 0x%x", (u32) i, j, k); - while (1); - } - k = *(i + 1); - if (k != ~(j + (j << 18))) { - printf ("Mem test error(+1), i=0x%x, 0x%x\n, 0x%x", - (u32) i + 1, j, k); - while (1); - } - } -#endif - - WATCHDOG_RESET (); - - /* Clear memory */ - for (i = (u32 *) 0; (u32) i < U32_S; i++) { - *i = 0; - } -#endif /* !start in ram */ - - WATCHDOG_RESET (); - - return (sdramsz << 20); -} - -#define POWER_OFFSET 0xF0000 -#define SW_WATCHDOG_REASON 13 - -#define BOOTDATA_OFFSET 0xF8000 -#define MAX_ATTEMPTS 5 - -#define FAILSAFE_BOOT 1 -#define SYSTEM_BOOT 2 - -#define WRITE_FLASH16(a, d) \ -do \ -{ \ - *((volatile u16 *) (a)) = (d);\ - } while(0) - -static void write_bootdata (volatile u16 * addr, u8 System, u8 Count) -{ - u16 data; - volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE); - - if ((System != FAILSAFE_BOOT) & (System != SYSTEM_BOOT)) { - printf ("Invalid system data %u, setting failsafe\n", System); - System = FAILSAFE_BOOT; - } - - if ((Count < 1) | (Count > MAX_ATTEMPTS)) { - printf ("Invalid boot count %u, setting 1\n", Count); - Count = 1; - } - - if (System == FAILSAFE_BOOT) { - printf ("Setting failsafe boot in flash\n"); - } else { - printf ("Setting system boot in flash\n"); - } - printf ("Boot attempt %d\n", Count); - - data = (System << 8) | Count; - /* AMD 16 bit */ - WRITE_FLASH16 (&flash[0x555], 0xAAAA); - WRITE_FLASH16 (&flash[0x2AA], 0x5555); - WRITE_FLASH16 (&flash[0x555], 0xA0A0); - - WRITE_FLASH16 (addr, data); -} - -static void maybe_update_restart_reason (volatile u32 * addr32) -{ - /* Update addr if sw wd restart */ - volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE); - volatile u16 *addr_16 = (u16 *) addr32; - u32 rsr; - - /* Dont reset register now */ - rsr = ((volatile immap_t *) CONFIG_SYS_IMMR)->im_clkrst.car_rsr; - - rsr >>= 24; - - if (rsr & 0x10) { - /* Was really a sw wd restart, update reason */ - - printf ("Last restart by software watchdog\n"); - - /* AMD 16 bit */ - WRITE_FLASH16 (&flash[0x555], 0xAAAA); - WRITE_FLASH16 (&flash[0x2AA], 0x5555); - WRITE_FLASH16 (&flash[0x555], 0xA0A0); - - WRITE_FLASH16 (addr_16, 0); - - udelay (1000); - - WATCHDOG_RESET (); - - /* AMD 16 bit */ - WRITE_FLASH16 (&flash[0x555], 0xAAAA); - WRITE_FLASH16 (&flash[0x2AA], 0x5555); - WRITE_FLASH16 (&flash[0x555], 0xA0A0); - - WRITE_FLASH16 (addr_16 + 1, SW_WATCHDOG_REASON); - - } -} - -static void check_restart_reason (void) -{ - /* Update restart reason if sw watchdog was - triggered */ - - int i; - volatile u32 *raddr; - - raddr = (u32 *) (CONFIG_SYS_FLASH_BASE + POWER_OFFSET); - - if (*raddr == 0xFFFFFFFF) { - /* Nothing written */ - maybe_update_restart_reason (raddr); - } else { - /* Search for latest written reason */ - i = 0; - while ((*(raddr + 2) != 0xFFFFFFFF) & (i < 2000)) { - raddr += 2; - i++; - } - if (i >= 2000) { - /* Whoa, dont write any more */ - printf ("*** No free restart reason found ***\n"); - } else { - /* Check if written */ - if (*raddr == 0) { - /* Erased by kernel, no new reason written */ - maybe_update_restart_reason (raddr + 2); - } - } - } -} - -static void check_boot_tries (void) -{ - /* Count the number of boot attemps - switch system if too many */ - - int i; - volatile u16 *addr; - volatile u16 data; - int failsafe = 1; - u8 system; - u8 count; - - addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET); - - if (*addr == 0xFFFF) { - printf ("*** No bootdata exists. ***\n"); - write_bootdata (addr, FAILSAFE_BOOT, 1); - } else { - /* Search for latest written bootdata */ - i = 0; - while ((*(addr + 1) != 0xFFFF) & (i < 8000)) { - addr++; - i++; - } - if (i >= 8000) { - /* Whoa, dont write any more */ - printf ("*** No bootdata found. Not updating flash***\n"); - } else { - /* See how many times we have tried to boot real system */ - data = *addr; - system = data >> 8; - count = data & 0xFF; - if ((system != SYSTEM_BOOT) & (system != FAILSAFE_BOOT)) { - printf ("*** Wrong system %d\n", system); - system = FAILSAFE_BOOT; - count = 1; - } else { - switch (count) { - case 0: - case 1: - case 2: - case 3: - case 4: - /* Try same system again if needed */ - count++; - break; - - case 5: - /* Switch system and reset tries */ - count = 1; - system = 3 - system; - printf ("***Too many boot attempts, switching system***\n"); - break; - default: - /* Switch system, start over and hope it works */ - printf ("***Unexpected data on addr 0x%x, %u***\n", - (u32) addr, data); - count = 1; - system = 3 - system; - } - } - write_bootdata (addr + 1, system, count); - if (system == SYSTEM_BOOT) { - failsafe = 0; - } - } - } - if (failsafe) { - printf ("Booting failsafe system\n"); - setenv ("bootargs", "panic=1 root=/dev/hda7"); - setenv ("bootcmd", "disk 100000 0:5;bootm 100000"); - } else { - printf ("Using normal system\n"); - setenv ("bootargs", "panic=1 root=/dev/hda4"); - setenv ("bootcmd", "disk 100000 0:2;bootm 100000"); - } -} - -int misc_init_r (void) -{ - u8 Rx[80]; - u8 Tx[5]; - int page; - int read = 0; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - /* Kill fpga */ - immap->im_ioport.iop_papar &= ~(PA_FL_CONFIG | PA_FL_CE); - immap->im_ioport.iop_padir |= (PA_FL_CONFIG | PA_FL_CE); - immap->im_ioport.iop_paodr &= ~(PA_FL_CONFIG | PA_FL_CE); - - /* Enable fpga, active low */ - immap->im_ioport.iop_padat &= ~PA_FL_CE; - - /* Start configuration */ - immap->im_ioport.iop_padat &= ~PA_FL_CONFIG; - udelay (2); - - immap->im_ioport.iop_padat |= (PA_FL_CONFIG | PA_FL_CE); - - /* Check if we need to boot failsafe system */ - check_boot_tries (); - - /* Check if we need to update restart reason */ - check_restart_reason (); - - if (ee_init_data ()) { - printf ("EEPROM init failed\n"); - return (0); - } - - /* Read the pages where ethernet address is stored */ - - for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) { - /* Copy from nvram to scratchpad */ - Tx[0] = RECALL_MEMORY; - Tx[1] = page; - if (ee_do_command (Tx, 2, NULL, 0, TRUE)) { - printf ("EE user page %d recall failed\n", page); - return (0); - } - - Tx[0] = READ_SCRATCHPAD; - if (ee_do_command (Tx, 2, Rx + read, 9, TRUE)) { - printf ("EE user page %d read failed\n", page); - return (0); - } - /* Crc in 9:th byte */ - if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) { - printf ("EE read failed, page %d. CRC error\n", page); - return (0); - } - read += 8; - } - - /* Add eos after eth addr */ - Rx[17] = 0; - - printf ("Ethernet addr read from eeprom: %s\n\n", Rx); - - if ((Rx[2] != ':') | - (Rx[5] != ':') | - (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) { - printf ("*** ethernet addr invalid, using default ***\n"); - } else { - setenv ("ethaddr", (char *)Rx); - } - return (0); -} diff --git a/board/gth/pcmcia.c b/board/gth/pcmcia.c deleted file mode 100644 index a4db16d..0000000 --- a/board/gth/pcmcia.c +++ /dev/null @@ -1,93 +0,0 @@ -#include <common.h> -#include <mpc8xx.h> -#include <pcmcia.h> - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#ifdef CONFIG_PCMCIA - -#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH" - -int pcmcia_voltage_set (int slot, int vcc, int vpp) -{ /* Do nothing */ - return 0; -} - -int pcmcia_hardware_enable (int slot) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - volatile pcmconf8xx_t *pcmp; - volatile sysconf8xx_t *sysp; - uint reg, mask; - - debug ("hardware_enable: GTH Slot %c\n", 'A' + slot); - - immap = (immap_t *) CONFIG_SYS_IMMR; - sysp = (sysconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_siu_conf)); - pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia)); - cp = (cpm8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_cpm)); - - /* clear interrupt state, and disable interrupts */ - pcmp->pcmc_pscr = PCMCIA_MASK (_slot_); - pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_); - - /* - * Disable interrupts, DMA, and PCMCIA buffers - * (isolate the interface) and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX (_slot_) = reg; - udelay (500); - - /* - * Make sure there is a card in the slot, - * then configure the interface. - */ - udelay (10000); - debug ("[%d] %s: PIPR(%p)=0x%x\n", - __LINE__, __FUNCTION__, - &(pcmp->pcmc_pipr), pcmp->pcmc_pipr); - if (pcmp->pcmc_pipr & 0x98000000) { - printf (" No Card found\n"); - return (1); - } - - mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot); - reg = pcmp->pcmc_pipr; - debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", - reg, - (reg & PCMCIA_VS1 (slot)) ? "n" : "ff", - (reg & PCMCIA_VS2 (slot)) ? "n" : "ff"); - - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX (_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX (_slot_) = reg; - - udelay (250000); /* some cards need >150 ms to come up :-( */ - - debug ("# hardware_enable done\n"); - - return 0; -} -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_hardware_disable(int slot) -{ - return 0; /* No hardware to disable */ -} -#endif - -#endif /* CONFIG_PCMCIA */ diff --git a/board/gth/u-boot.lds b/board/gth/u-boot.lds deleted file mode 100644 index 4145a91..0000000 --- a/board/gth/u-boot.lds +++ /dev/null @@ -1,127 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/mpc8xx/start.o(.text) - *(.text) - common/env_embedded.o(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 5dd0311..9a92941 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -272,8 +272,7 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( fpga, 6, 1, do_fpga, @@ -324,8 +323,7 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* fall through ... */ default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } memset (data, 0, HYMOD_EEPROM_SIZE); diff --git a/board/ibf-dsp561/ibf-dsp561.c b/board/ibf-dsp561/ibf-dsp561.c index b5bebd4..d2ac7a5 100644 --- a/board/ibf-dsp561/ibf-dsp561.c +++ b/board/ibf-dsp561/ibf-dsp561.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -16,3 +17,10 @@ int checkboard(void) printf(" Support: http://www.i-syst.com/\n"); return 0; } + +#ifdef CONFIG_DRIVER_AX88180 +int board_eth_init(bd_t *bis) +{ + return ax88180_initialize(bis); +} +#endif diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c index 637bb5a..cf82f61 100644 --- a/board/inka4x0/inkadiag.c +++ b/board/inka4x0/inkadiag.c @@ -168,8 +168,7 @@ static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc, printf("exit code: 0x%X\n", val); return 0; default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } return -1; @@ -244,10 +243,8 @@ static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc, int combrd, baudrate, i, j, len; int address; - if (argc < 5) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 5) + return cmd_usage(cmdtp); argc--; argv++; @@ -394,10 +391,8 @@ static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc, unsigned int period, freq; int prev, i; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); argc--; argv++; @@ -474,8 +469,7 @@ static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc, return c->cmd(c, flag, argc, argv); } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } } diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 3a33b5a..d7cbd7a 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -186,10 +186,8 @@ int board_init(void) int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 tmp; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((strcmp(argv[1], "off") == 0)) { printf("SPI FLASH disabled, NAND enabled\n"); @@ -214,8 +212,7 @@ int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) tmp = readl(KW_GPIO0_BASE); writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index 6455d1d..e9f6625 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -46,7 +46,7 @@ /* * This the the zoom2, board specific, gpmc configuration for the * quad uart on the debug board. The more general gpmc configurations - * are setup at the cpu level in arch/arm/cpu/arm_cortexa8/omap3/mem.c + * are setup at the cpu level in arch/arm/cpu/armv7/omap3/mem.c * * The details of the setting of the serial gpmc setup are not available. * The values were provided by another party. diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 61a1e14..9d6c21f 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -845,8 +845,7 @@ int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( pic, 4, 1, do_pic, @@ -975,8 +974,7 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 3948c13..ec113e7 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -306,20 +306,15 @@ void hw_watchdog_reset(void) int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); - if ((strcmp(argv[1], "on") == 0)) { + if ((strcmp(argv[1], "on") == 0)) gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1); - } else if ((strcmp(argv[1], "off") == 0)) { + else if ((strcmp(argv[1], "off") == 0)) gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0); - } else { - cmd_usage(cmdtp); - return 1; - } - + else + return cmd_usage(cmdtp); return 0; } diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index 7c27233..054d644 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -69,7 +69,7 @@ phys_size_t initdram (int board_type) long dram_size = 0; #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -110,8 +110,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index a3722b2..b4343d8 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -528,8 +528,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } #endif - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 199def4..4a91458 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -232,8 +232,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index d7adff2..a61e945 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -616,9 +616,8 @@ int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int rcode = -1; if (argc < 2) { - usage: - cmd_usage(cmdtp); - return 1; +usage: + return cmd_usage(cmdtp); } if (argc >= 3) { diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index 29a095d..e3abeb8 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -635,10 +635,8 @@ static int set_lcd_brightness(char *brightness) static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); return set_lcd_brightness(argv[1]); } diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index 5353d73..a302b91 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -134,7 +134,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index b14a3d3..f9d92d9 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -290,7 +290,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index 7329435..692160c 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -36,20 +36,20 @@ extern int do_bootm (cmd_tbl_t *, int, int, char *[]); /* * Command led: controls the various LEDs 0..11 on the PN62 card. */ -int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_led(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[]) { - unsigned int number, function; + unsigned int number, function; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } - number = simple_strtoul(argv[1], NULL, 10); - if (number > PN62_LED_MAX) - return 1; - function = simple_strtoul(argv[2], NULL, 16); - set_led (number, function); - return 0; + if (argc != 3) + return cmd_usage(cmdtp); + + number = simple_strtoul(argv[1], NULL, 10); + if (number > PN62_LED_MAX) + return 1; + + function = simple_strtoul(argv[2], NULL, 16); + set_led(number, function); + return 0; } U_BOOT_CMD( led , 3, 1, do_led, @@ -83,8 +83,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) addr = simple_strtoul(argv[1], NULL, 16); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } printf ("## Ready for image download ...\n"); diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 3f2deed..83b7914 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -214,10 +214,8 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c index dae01ec..e15013f 100644 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ b/board/renesas/sh7785lcr/rtl8169_mac.c @@ -304,10 +304,8 @@ int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned char mac[6]; char *s, *e; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); s = argv[1]; @@ -330,10 +328,8 @@ U_BOOT_CMD( int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc != 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 1) + return cmd_usage(cmdtp); mac_read(); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c index 44247c8..6d92c83 100644 --- a/board/renesas/sh7785lcr/selfcheck.c +++ b/board/renesas/sh7785lcr/selfcheck.c @@ -112,10 +112,8 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *cmd; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); cmd = argv[1]; switch (cmd[0]) { @@ -150,8 +148,7 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) test_net(); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index c7835de..e41c84c 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -387,13 +387,6 @@ int dram_init(void) #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif } #endif diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 34861d4..50fae7c 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -160,7 +160,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts("\n SDRAM on Local Bus: "); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 194f6ab..733979c 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -116,7 +116,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -152,7 +152,7 @@ sdram_init(void) #if defined(CONFIG_SYS_LBC_SDRAM_SIZE) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; @@ -163,22 +163,14 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); - asm("msync"); - - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - asm("msync"); - - out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM); - asm("msync"); - - out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM); - asm("msync"); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); asm("msync"); - out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); asm("msync"); @@ -406,11 +398,9 @@ int last_stage_init(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); + +#ifdef CONFIG_FSL_PCI_INIT + FT_FSL_PCI_SETUP; #endif } #endif diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index c40b5e3..10ba62f 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -269,7 +269,7 @@ phys_size_t initdram (int board_type) #if 0 #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -310,8 +310,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c index d20fa51..705e1c2 100644 --- a/board/sbc8641d/law.c +++ b/board/sbc8641d/law.c @@ -32,11 +32,11 @@ * * 0x0000_0000 DDR 256M * 0x1000_0000 DDR2 256M - * 0x8000_0000 PCI1 MEM 512M - * 0xa000_0000 PCI2 MEM 512M + * 0x8000_0000 PCIE1 MEM 512M + * 0xa000_0000 PCIE2 MEM 512M * 0xc000_0000 RapidIO 512M - * 0xe200_0000 PCI1 IO 16M - * 0xe300_0000 PCI2 IO 16M + * 0xe200_0000 PCIE1 IO 16M + * 0xe300_0000 PCIE2 IO 16M * 0xf800_0000 CCSRBAR 2M * 0xfe00_0000 FLASH (boot bank) 32M * @@ -49,11 +49,11 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2), #endif - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO) }; diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index c4e9875..54b2d0b 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -191,16 +191,16 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = { }; #endif -static struct pci_controller pci1_hose = { +static struct pci_controller pcie1_hose = { #ifndef CONFIG_PCI_PNP config_table:pci_mpc86xxcts_config_table #endif }; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif /* CONFIG_PCIE2 */ int first_free_busno = 0; @@ -212,10 +212,10 @@ void pci_init_board(void) uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) >> MPC8641_PORDEVSR_IO_SEL_SHIFT; -#ifdef CONFIG_PCI1 +#ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - struct pci_controller *hose = &pci1_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; + struct pci_controller *hose = &pcie1_hose; struct pci_region *r = hose->regions; #ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) @@ -236,16 +236,16 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BUS, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, + CONFIG_SYS_PCIE1_MEM_BUS, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BUS, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, + CONFIG_SYS_PCIE1_IO_BUS, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -264,26 +264,26 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS1: Disabled\n"); -#endif /* CONFIG_PCI1 */ +#endif /* CONFIG_PCIE1 */ -#ifdef CONFIG_PCI2 +#ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; - struct pci_controller *hose = &pci2_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; + struct pci_controller *hose = &pcie2_hose; struct pci_region *r = hose->regions; /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI2_MEM_BUS, - CONFIG_SYS_PCI2_MEM_PHYS, - CONFIG_SYS_PCI2_MEM_SIZE, + CONFIG_SYS_PCIE2_MEM_BUS, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI2_IO_BUS, - CONFIG_SYS_PCI2_IO_PHYS, - CONFIG_SYS_PCI2_IO_SIZE, + CONFIG_SYS_PCIE2_IO_BUS, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -298,7 +298,7 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS 2: Disabled\n"); -#endif /* CONFIG_PCI2 */ +#endif /* CONFIG_PCIE2 */ } @@ -308,12 +308,7 @@ void ft_board_setup (void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCI2 - ft_fsl_pci_setup(blob, "pci1", &pci2_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/sheldon/simpc8313/sdram.c b/board/sheldon/simpc8313/sdram.c index ebb70a2..ba59943 100644 --- a/board/sheldon/simpc8313/sdram.c +++ b/board/sheldon/simpc8313/sdram.c @@ -129,7 +129,7 @@ void si_read_i2c(u32 lbyte, int count, u8 *buffer) phys_size_t initdram(int board_type) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc= &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize; if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im) diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c index cb30b48..c2164c9 100644 --- a/board/sheldon/simpc8313/simpc8313.c +++ b/board/sheldon/simpc8313/simpc8313.c @@ -93,7 +93,7 @@ int misc_init_r(void) { int rc = 0; immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - fsl_lbus_t *lbus = &immap->lbus; + fsl_lbc_t *lbus = &immap->im_lbc; u32 *mxmr = &lbus->mamr; /* Pointer to mamr */ /* UPM Table Configuration Code */ diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c index 5660c09..ef8bfde 100644 --- a/board/siemens/common/fpga.c +++ b/board/siemens/common/fpga.c @@ -286,8 +286,7 @@ int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; failure: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index 14d75ea..9795284 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -399,8 +399,7 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD (puma, 4, 1, do_puma, diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 9183c15..72e7401 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -87,8 +87,6 @@ int checkboard (void) int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -99,8 +97,10 @@ int misc_init_r (void) * Check if boot FLASH isn't max size */ if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) { - memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, gd->bd->bi_flashstart | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); /* * Re-check to get correct base address @@ -112,8 +112,8 @@ int misc_init_r (void) * Check if only one FLASH bank is available */ if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); /* * Re-do flash protection upon new addresses @@ -148,7 +148,7 @@ int misc_init_r (void) */ void local_bus_init (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); sys_info_t sysinfo; uint clkdiv; @@ -299,26 +299,25 @@ const gdc_regs *board_get_regs (void) int lime_probe(void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint cfg_br2; uint cfg_or2; int type; - cfg_br2 = memctl->br2; - cfg_or2 = memctl->or2; + cfg_br2 = get_lbc_br(2); + cfg_or2 = get_lbc_or(2); /* Configure GPCM for CS2 */ - memctl->br2 = 0; - memctl->or2 = 0xfc000410; - memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901; + set_lbc_br(2, 0); + set_lbc_or(2, 0xfc000410); + set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901); /* Get controller type */ type = mb862xx_probe(CONFIG_SYS_LIME_BASE); /* Restore previous CS2 configuration */ - memctl->br2 = 0; - memctl->or2 = cfg_or2; - memctl->br2 = cfg_br2; + set_lbc_br(2, 0); + set_lbc_or(2, cfg_or2); + set_lbc_br(2, cfg_br2); return (type == MB862XX_TYPE_LIME) ? 1 : 0; } diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c index d99036b..0562222 100644 --- a/board/spear/common/spr_misc.c +++ b/board/spear/common/spr_misc.c @@ -215,10 +215,8 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *s, *e; char i2c_mac[20]; - if ((argc > 3) || (argc < 2)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc > 3) || (argc < 2)) + return cmd_usage(cmdtp); if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) { @@ -286,8 +284,7 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD(chip_config, 3, 1, do_chip_config, diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c index c00bf16..98ab49f 100644 --- a/board/t3corp/chip_config.c +++ b/board/t3corp/chip_config.c @@ -27,13 +27,27 @@ struct ppc4xx_config ppc4xx_config_val[] = { { - "600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100", + "600-67", "CPU: 600 PLB: 200 OPB: 67 EBC: 67", + { + 0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100", { 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 } }, { + "667", "CPU: 667 PLB: 166 OPB: 83 EBC: 83", + { + 0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0, + 0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { "800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100", { 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, diff --git a/board/t3corp/init.S b/board/t3corp/init.S index 4a4217f..ecd35ff 100644 --- a/board/t3corp/init.S +++ b/board/t3corp/init.S @@ -81,11 +81,13 @@ tlbtab: tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG) /* TLB-entry for FPGA(s) */ - tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4, + tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4, + tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M, + CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4, + tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4, AC_RW | SA_IG) /* TLB-entry for OCM */ diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c index 8ffa321..ddf5897 100644 --- a/board/t3corp/t3corp.c +++ b/board/t3corp/t3corp.c @@ -45,7 +45,7 @@ int board_early_init_f(void) mtdcr(UIC1SR, 0xffffffff); /* clear all */ mtdcr(UIC1ER, 0x00000000); /* disable all */ mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1PR, 0x7fffffff); /* per ref-board manual */ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(UIC1SR, 0xffffffff); /* clear all */ diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile index 3812ba1..bad018a 100644 --- a/board/tcm-bf537/Makefile +++ b/board/tcm-bf537/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/tcm-bf537/flash.c b/board/tcm-bf537/flash.c deleted file mode 100644 index 14055c6..0000000 --- a/board/tcm-bf537/flash.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * flash.c - helper commands for working with GPIO-assisted flash - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include "gpio_cfi_flash.h" - -int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong faddr = CONFIG_SYS_FLASH_BASE; - ushort data; - ulong dflg; - - if (argc == 3) { - dflg = simple_strtoul(argv[1], NULL, 16); - faddr |= (dflg << 21); - dflg = simple_strtoul(argv[2], NULL, 16); - faddr |= (dflg << 22); - gpio_cfi_flash_swizzle((void *)faddr); - } else { - data = bfin_read_PORTFIO(); - printf("Port F data %04x (PF4:%i PF5:%i)\n", data, - !!(data & PF4), !!(data & PF5)); - } - - return 0; -} - -U_BOOT_CMD(pf, 3, 0, do_pf, - "set/clear PF4/PF5 GPIO flash bank switch\n", - "<pf4> <pf5> - set PF4/PF5 GPIO pin state\n"); diff --git a/board/tcm-bf537/gpio_cfi_flash.c b/board/tcm-bf537/gpio_cfi_flash.c index ac8587c..08ea7af 100644 --- a/board/tcm-bf537/gpio_cfi_flash.c +++ b/board/tcm-bf537/gpio_cfi_flash.c @@ -8,12 +8,13 @@ #include <common.h> #include <asm/blackfin.h> +#include <asm/gpio.h> #include <asm/io.h> #include "gpio_cfi_flash.h" -#define GPIO_PIN_1 PF4 +#define GPIO_PIN_1 GPIO_PF4 #define GPIO_MASK_1 (1 << 21) -#define GPIO_PIN_2 PF5 +#define GPIO_PIN_2 GPIO_PF5 #define GPIO_MASK_2 (1 << 22) #define GPIO_MASK (GPIO_MASK_1 | GPIO_MASK_2) @@ -21,16 +22,10 @@ void *gpio_cfi_flash_swizzle(void *vaddr) { unsigned long addr = (unsigned long)vaddr; - if (addr & GPIO_MASK_1) - bfin_write_PORTFIO_SET(GPIO_PIN_1); - else - bfin_write_PORTFIO_CLEAR(GPIO_PIN_1); + gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1); #ifdef GPIO_MASK_2 - if (addr & GPIO_MASK_2) - bfin_write_PORTFIO_SET(GPIO_PIN_2); - else - bfin_write_PORTFIO_CLEAR(GPIO_PIN_2); + gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2); #endif SSYNC(); @@ -57,6 +52,9 @@ MAKE_FLASH(64, q) /* flash_write64() flash_read64() */ void gpio_cfi_flash_init(void) { - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | GPIO_PIN_1 | GPIO_PIN_2); + gpio_request(GPIO_PIN_1, "gpio_cfi_flash"); +#ifdef GPIO_MASK_2 + gpio_request(GPIO_PIN_2, "gpio_cfi_flash"); +#endif gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE); } diff --git a/board/altera/ep1c20/Makefile b/board/ti/panda/Makefile index acad2aa..81e5469 100644 --- a/board/altera/ep1c20/Makefile +++ b/board/ti/panda/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2006 +# (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -22,25 +22,19 @@ # include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif LIB = $(obj)lib$(BOARD).a -COMOBJS := ../common/AMDLV065D.o ../common/epled.o +COBJS := panda.o -COBJS := $(BOARD).o $(COMOBJS) - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/altera/ep1s40/config.mk b/board/ti/panda/config.mk index dab2740..7382263 100644 --- a/board/altera/ep1s40/config.mk +++ b/board/ti/panda/config.mk @@ -1,6 +1,9 @@ # -# (C) Copyright 2005, Psyent Corporation <www.psyent.com> -# Scott McNutt <smcnutt@psyent.com> +# (C) Copyright 2006-2009 +# Texas Instruments Incorporated, <www.ti.com> +# +# OMAP 4430 SDP +# see http://www.ti.com/ for more information on Texas Instruments # # See file CREDITS for list of people who contributed to this # project. @@ -12,7 +15,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -20,12 +23,10 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # +# SDRAM Address Space: +# 8000'0000 - 9fff'ffff (512 MB) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) -TEXT_BASE = 0x01fc0000 - -PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif +# Let's place u-boot 1MB before the end of SDRAM. +TEXT_BASE = 0x9ff00000 diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c new file mode 100644 index 0000000..917bbec --- /dev/null +++ b/board/ti/panda/panda.c @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: OMAP4 Panda\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + + gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA; + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure Panda board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + return 0; +} diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile new file mode 100644 index 0000000..2554c7b --- /dev/null +++ b/board/ti/sdp4430/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := sdp.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/altera/ep1c20/config.mk b/board/ti/sdp4430/config.mk index dab2740..7382263 100644 --- a/board/altera/ep1c20/config.mk +++ b/board/ti/sdp4430/config.mk @@ -1,6 +1,9 @@ # -# (C) Copyright 2005, Psyent Corporation <www.psyent.com> -# Scott McNutt <smcnutt@psyent.com> +# (C) Copyright 2006-2009 +# Texas Instruments Incorporated, <www.ti.com> +# +# OMAP 4430 SDP +# see http://www.ti.com/ for more information on Texas Instruments # # See file CREDITS for list of people who contributed to this # project. @@ -12,7 +15,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -20,12 +23,10 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # +# SDRAM Address Space: +# 8000'0000 - 9fff'ffff (512 MB) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) -TEXT_BASE = 0x01fc0000 - -PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif +# Let's place u-boot 1MB before the end of SDRAM. +TEXT_BASE = 0x9ff00000 diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c new file mode 100644 index 0000000..8ed7873 --- /dev/null +++ b/board/ti/sdp4430/sdp.c @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: OMAP4430 SDP\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + + gd->bd->bi_arch_number = MACH_TYPE_OMAP_4430SDP; + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure SDP board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + return 0; +} diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 0db7050..0789c58 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -327,8 +327,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 0: case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: if (strncmp(argv[1],"saw",3) == 0) { printf ("Play sawtooth\n"); @@ -342,8 +341,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1],"saw",3) == 0) { duration = simple_strtoul(argv[2], NULL, 10); @@ -358,8 +356,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) LEFT_RIGHT); return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 4: if (strncmp(argv[1],"saw",3) == 0) { duration = simple_strtoul(argv[2], NULL, 10); @@ -382,8 +379,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) pcm1772_write_reg((uchar)reg, (uchar)val); return 0; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 5: if (strncmp(argv[1],"saw",3) == 0) { duration = simple_strtoul(argv[2], NULL, 10); @@ -412,8 +408,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) channel); return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } printf ("Usage:\nsound cmd [arg1] [arg2] ...\n"); return 1; @@ -513,8 +508,7 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) channel = LEFT_RIGHT; break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if ((tmp = getenv ("volume")) != NULL) { diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index e564879..8d046f4 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -253,10 +253,10 @@ static int detect_num_flash_banks(void) debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks); /* set OR0 and BR0 */ - im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH | - (-(total_size) & OR_GPCM_AM); - im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) | - (BR_MS_GPCM | BR_PS_32 | BR_V); + set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH | + (-(total_size) & OR_GPCM_AM)); + set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) | + (BR_MS_GPCM | BR_PS_32 | BR_V)); return (0); } diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c index 3da689a..4b16c31 100644 --- a/board/tqc/tqm85xx/nand.c +++ b/board/tqc/tqm85xx/nand.c @@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt; */ static void upmb_write (u_char addr, ulong val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); @@ -393,14 +393,14 @@ static void upmb_write (u_char addr, ulong val) /* * Initialize UPM for NAND flash access. */ -static void nand_upm_setup (volatile ccsr_lbc_t *lbc) +static void nand_upm_setup (volatile fsl_lbc_t *lbc) { uint i, j; uint or3 = CONFIG_SYS_OR3_PRELIM; uint clock = get_lbc_clock (); - out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */ - out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM); + set_lbc_br(3, 0); /* disable bank and reset all bits */ + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); /* * Search appropriate UPM table for bus clock. @@ -424,7 +424,7 @@ static void nand_upm_setup (volatile ccsr_lbc_t *lbc) /* EAD must be set due to TQM8548 timing specification */ or3 |= OR_UPM_EAD; - out_be32 (&lbc->or3, or3); + set_lbc_or(3, or3); /* Assign address of table */ nand_upm_patt = upm_freq_table[i].upm_patt; @@ -458,7 +458,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip) int board_nand_init (struct nand_chip *nand) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; if (!nand_upm_patt) nand_upm_setup (lbc); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 8c9d586..dda2cb6 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -269,8 +269,6 @@ int checkboard (void) int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -281,26 +279,27 @@ int misc_init_r (void) * Recalculate CS configuration if second FLASH bank is available */ if (flash_info[0].size > 0) { - memctl->or1 = ((-flash_info[0].size) & 0xffff8000) | - (CONFIG_SYS_OR1_PRELIM & 0x00007fff); - memctl->br1 = gd->bd->bi_flashstart | - (CONFIG_SYS_BR1_PRELIM & 0x00007fff); + set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) | + (CONFIG_SYS_OR1_PRELIM & 0x00007fff)); + set_lbc_br(1, gd->bd->bi_flashstart | + (CONFIG_SYS_BR1_PRELIM & 0x00007fff)); /* * Re-check to get correct base address for bank 1 */ flash_get_size (gd->bd->bi_flashstart, 0); } else { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); } /* * If bank 1 is equipped, bank 0 is mapped after bank 1 */ - memctl->or0 = ((-flash_info[1].size) & 0xffff8000) | - (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) | - (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); + /* * Re-check to get correct base address for bank 0 */ @@ -341,7 +340,7 @@ int misc_init_r (void) */ static void upmc_write (u_char addr, uint val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); @@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val) uint get_lbc_clock (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sys_info; ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; @@ -386,7 +385,7 @@ uint get_lbc_clock (void) void local_bus_init (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint lbc_mhz = get_lbc_clock () / 1000000; #ifdef CONFIG_MPC8548 @@ -502,10 +501,10 @@ void local_bus_init (void) * set if Local Bus Clock is > 83 MHz. */ if (lbc_mhz > 83) - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); + set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); else - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN); - out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN); + set_lbc_or(2, CONFIG_SYS_OR2_CAN); + set_lbc_br(2, CONFIG_SYS_BR2_CAN); /* LGPL4 is UPWAIT */ out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); @@ -688,12 +687,7 @@ void ft_board_setup (void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 6d23470..ca4415c 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -167,10 +167,8 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; int cycle_status; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); led_init (); global_vars_init (); @@ -270,14 +268,11 @@ int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i, dip; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); - if ((dip = read_dip ()) == -1) { + if ((dip = read_dip ()) == -1) return 1; - } for (i = 0; i < 4; i++) { if ((dip & (1 << i)) == 0) @@ -303,14 +298,11 @@ int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int vcc5v; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); - if ((vcc5v = read_vcc5v ()) == -1) { + if ((vcc5v = read_vcc5v ()) == -1) return (1); - } printf ("%d", (vcc5v / 1000)); printf (".%d", (vcc5v % 1000) / 100); @@ -331,10 +323,8 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int contact_temp; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); tsc2000_spi_init (); @@ -354,36 +344,32 @@ U_BOOT_CMD( int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_STATUS, 1, - (unsigned char*) &status, 1)) { + (unsigned char*) &status, 1)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_PASS_CYCLES, 1, - (unsigned char*) &pass_cycles, 2)) { + (unsigned char*) &pass_cycles, 2)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_CYCLE, - 1, (unsigned char*) &first_error_cycle, 2)) { + 1, (unsigned char*) &first_error_cycle, 2)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NUM, - 1, (unsigned char*) &first_error_num, 1)) { + 1, (unsigned char*) &first_error_num, 1)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME, 1, (unsigned char*)first_error_name, - sizeof (first_error_name))) { + sizeof (first_error_name))) return (1); - } - if (read_max_cycles () != 0) { + if (read_max_cycles () != 0) return (1); - } printf ("max_cycles = %d\n", max_cycles); printf ("status = %d\n", status); @@ -850,14 +836,11 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) struct rtc_time tm; #endif - if (argc > 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 2) + return cmd_usage(cmdtp); - if (argc > 1) { + if (argc > 1) delay = simple_strtoul(argv[1], NULL, 10); - } tsc2000_spi_init (); while (1) { diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index fede2e0..fd623df 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -42,36 +42,29 @@ static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int offset,value; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); offset=simple_strtoul(argv[2],NULL,16); value=simple_strtoul(argv[3],NULL,16); if (offset > 0x40) { printf("Wrong offset : 0x%x\n",offset); - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } dm9000_write_srom_word(offset, value); return (0); } int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); - if (strcmp (argv[1],"read") == 0) { + if (strcmp (argv[1],"read") == 0) return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); - } else if (strcmp (argv[1],"write") == 0) { + else if (strcmp (argv[1],"write") == 0) return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/gth/Makefile b/board/ve8313/Makefile index 4b5c528..c95f90e 100644 --- a/board/gth/Makefile +++ b/board/ve8313/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2006 +# (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ee_access.o pcmcia.o +COBJS := $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) @@ -34,6 +34,12 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + ######################################################################### # defines $(obj).depend target diff --git a/board/ve8313/config.mk b/board/ve8313/config.mk new file mode 100644 index 0000000..02dd33e --- /dev/null +++ b/board/ve8313/config.mk @@ -0,0 +1,7 @@ +ifndef NAND_SPL +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp +endif + +ifndef TEXT_BASE +TEXT_BASE = 0xfe000000 +endif diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c new file mode 100644 index 0000000..8ba1b19 --- /dev/null +++ b/board/ve8313/ve8313.c @@ -0,0 +1,215 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Author: Scott Wood <scottwood@freescale.com> + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <libfdt.h> +#include <pci.h> +#include <mpc83xx.h> +#include <ns16550.h> +#include <nand.h> + +#include <asm/bitops.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +extern void disable_addr_trans (void); +extern void enable_addr_trans (void); + +int checkboard(void) +{ + puts("Board: ve8313\n"); + return 0; +} + +static long fixed_sdram(void) +{ + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; + +#ifndef CONFIG_SYS_RAMBOOT + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; + u32 msize_log2 = __ilog2(msize); + + out_be32(&im->sysconf.ddrlaw[0].bar, + (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000)); + out_be32(&im->sysconf.ddrlaw[0].ar, (LBLAWAR_EN | (msize_log2 - 1))); + out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + __udelay(50000); + + out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); + out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CONFIG); + + /* Currently we use only one CS, so disable the other bank. */ + out_be32(&im->ddr.cs_config[1], 0); + + out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); + out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); + out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); + out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); + out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); + + out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG); + + out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2); + out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); + out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2); + + out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); + sync(); + + /* enable DDR controller */ + setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); + + /* now check the real size */ + disable_addr_trans (); + msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize); + enable_addr_trans (); +#endif + + return msize; +} + +phys_size_t initdram(int board_type) +{ + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile fsl_lbus_t *lbc = &im->lbus; + u32 msize; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + msize = fixed_sdram(); + + /* Local Bus setup lbcr and mrtpr */ + out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); + out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); + sync(); + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} + +#define VE8313_WDT_EN 0x00020000 +#define VE8313_WDT_TRIG 0x00040000 + +int board_early_init_f (void) +{ + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio; + +#if defined(CONFIG_HW_WATCHDOG) + /* enable WDT */ + clrbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG); +#else + /* disable WDT */ + setbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG); +#endif + /* set WDT pins as output */ + setbits_be32(&gpio->dir, VE8313_WDT_EN | VE8313_WDT_TRIG); + + return 0; +} + +#if defined(CONFIG_HW_WATCHDOG) +void hw_watchdog_reset(void) +{ + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio; + unsigned long reg; + + reg = in_be32(&gpio->dat); + if (reg & VE8313_WDT_TRIG) + clrbits_be32(&gpio->dat, VE8313_WDT_TRIG); + else + setbits_be32(&gpio->dat, VE8313_WDT_TRIG); +} +#endif + + +#if defined(CONFIG_PCI) +static struct pci_region pci_regions[] = { + { + bus_start: CONFIG_SYS_PCI1_MEM_BASE, + phys_start: CONFIG_SYS_PCI1_MEM_PHYS, + size: CONFIG_SYS_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CONFIG_SYS_PCI1_MMIO_BASE, + phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, + size: CONFIG_SYS_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CONFIG_SYS_PCI1_IO_BASE, + phys_start: CONFIG_SYS_PCI1_IO_PHYS, + size: CONFIG_SYS_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + int warmboot; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + setbits_be32(&clk->occr, 0xe0000000); + + /* + * Configure PCI Local Access Windows + */ + out_be32(&pci_law[0].bar, CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR); + out_be32(&pci_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); + + out_be32(&pci_law[1].bar, CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR); + out_be32(&pci_law[1].ar, LBLAWAR_EN | LBLAWAR_1MB); + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; + + mpc83xx_pci_init(1, reg, warmboot); +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif diff --git a/board/vpac270/Makefile b/board/vpac270/Makefile new file mode 100644 index 0000000..0f3eacd --- /dev/null +++ b/board/vpac270/Makefile @@ -0,0 +1,48 @@ + +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := vpac270.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/vpac270/config.mk b/board/vpac270/config.mk new file mode 100644 index 0000000..1d650ac --- /dev/null +++ b/board/vpac270/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xa1000000 diff --git a/board/altera/ep1s10/ep1s10.c b/board/vpac270/lowlevel_init.S index cf886da..ec0d12c 100644 --- a/board/altera/ep1s10/ep1s10.c +++ b/board/vpac270/lowlevel_init.S @@ -1,6 +1,8 @@ /* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> + * Voipac PXA270 Lowlevel Hardware Initialization + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * * * See file CREDITS for list of people who contributed to this * project. @@ -21,32 +23,18 @@ * MA 02111-1307 USA */ -#include <common.h> -#include <netdev.h> - -int board_early_init_f (void) -{ - return 0; -} - -int checkboard (void) -{ - puts ("BOARD : Altera EP-1S10\n"); - return 0; -} +#include <config.h> +#include <version.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/macro.h> -phys_size_t initdram (int board_type) -{ - return (0); -} +.globl lowlevel_init +lowlevel_init: + pxa_gpio_setup + pxa_wait_ticks 0x8000 + pxa_mem_setup + pxa_wakeup + pxa_intr_setup + pxa_clock_setup -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif + mov pc, lr diff --git a/board/vpac270/u-boot.lds b/board/vpac270/u-boot.lds new file mode 100644 index 0000000..58c371d --- /dev/null +++ b/board/vpac270/u-boot.lds @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c new file mode 100644 index 0000000..48e93ab --- /dev/null +++ b/board/vpac270/vpac270.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ + +/* + * Miscelaneous platform dependent initialisations + */ +extern struct serial_device serial_ffuart_device; +extern struct serial_device serial_btuart_device; +extern struct serial_device serial_stuart_device; + +struct serial_device *default_serial_console (void) +{ + return &serial_ffuart_device; +} + +int board_init (void) +{ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of vpac270 */ + gd->bd->bi_arch_number = MACH_TYPE_VPAC270; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + return 0; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + + return 0; +} + +int usb_board_init(void) +{ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); + + UHCHR |= UHCHR_FSBIR; + + while (UHCHR & UHCHR_FSBIR); + + UHCHR &= ~UHCHR_SSE; + UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + + /* Clear any OTG Pin Hold */ + if (PSSR & PSSR_OTGPH) + PSSR |= PSSR_OTGPH; + + UHCRHDA &= ~(0x200); + UHCRHDA |= 0x100; + + /* Set port power control mask bits, only 3 ports. */ + UHCRHDB |= (0x7<<17); + + /* enable port 2 */ + UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + return 0; +} + +void usb_board_init_fail(void) +{ + return; +} + +void usb_board_stop(void) +{ + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCCOMS |= 1; + udelay(10); + + CKEN &= ~CKEN10_USBHOST; + + return; +} + +#ifdef CONFIG_DRIVER_DM9000 +int board_eth_init(bd_t *bis) +{ + return dm9000_initialize(bis); +} +#endif diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index 44d40ee..cab9881 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -38,10 +38,8 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) uchar dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR; /* Validate usage */ - if (argc > 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 2) + return cmd_usage(cmdtp); /* Passed in EEPROM address */ if (argc == 2) diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c index 3a81827..ece7882 100644 --- a/board/xes/common/fsl_8xxx_pci.c +++ b/board/xes/common/fsl_8xxx_pci.c @@ -398,18 +398,6 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_pci_setup(void *blob, bd_t *bd) { - /* TODO - make node name (eg pci0) dynamic */ -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); -#endif + FT_FSL_PCI_SETUP; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c index f4231a9..5822941 100644 --- a/board/xes/xpedite5170/xpedite5170.c +++ b/board/xes/xpedite5170/xpedite5170.c @@ -56,8 +56,6 @@ int checkboard(void) */ static void flash_cs_fixup(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; int flash_sel; /* @@ -70,11 +68,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c index 7109771..a2627f8 100644 --- a/board/xes/xpedite5200/xpedite5200.c +++ b/board/xes/xpedite5200/xpedite5200.c @@ -38,7 +38,7 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd); int checkboard(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); char *s; @@ -65,7 +65,6 @@ int checkboard(void) static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel; /* @@ -78,11 +77,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c index 48d9fc8..2a060c2 100644 --- a/board/xes/xpedite5370/xpedite5370.c +++ b/board/xes/xpedite5370/xpedite5370.c @@ -58,7 +58,6 @@ int checkboard(void) static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel; /* @@ -71,11 +70,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/altera/ep1s40/Makefile b/board/zipitz2/Makefile index acad2aa..2673835 100644 --- a/board/altera/ep1s40/Makefile +++ b/board/zipitz2/Makefile @@ -1,6 +1,9 @@ + +# +# Copyright (C) 2009 +# Marek Vasut <marek.vasut@gmail.com> # -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Heavily based on pxa255_idp platform # # See file CREDITS for list of people who contributed to this # project. @@ -22,22 +25,18 @@ # include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif LIB = $(obj)lib$(BOARD).a -COMOBJS := ../common/AMDLV065D.o ../common/epled.o - -COBJS := $(BOARD).o $(COMOBJS) +COBJS := zipitz2.o +SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/zipitz2/config.mk b/board/zipitz2/config.mk new file mode 100644 index 0000000..1d650ac --- /dev/null +++ b/board/zipitz2/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xa1000000 diff --git a/board/zipitz2/lowlevel_init.S b/board/zipitz2/lowlevel_init.S new file mode 100644 index 0000000..82a52e8 --- /dev/null +++ b/board/zipitz2/lowlevel_init.S @@ -0,0 +1,40 @@ +/* + * Aeronix Zipit Z2 Lowlevel Hardware Initialization + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/macro.h> + +.globl lowlevel_init +lowlevel_init: + pxa_gpio_setup + pxa_wait_ticks 0x8000 + pxa_mem_setup + pxa_wakeup + pxa_intr_setup + pxa_clock_setup + + mov pc, lr diff --git a/board/zipitz2/u-boot.lds b/board/zipitz2/u-boot.lds new file mode 100644 index 0000000..fb4358b --- /dev/null +++ b/board/zipitz2/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + _end = .; +} diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c new file mode 100644 index 0000000..14d1d76 --- /dev/null +++ b/board/zipitz2/zipitz2.c @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2009 + * Marek Vasut <marek.vasut@gmail.com> + * + * Heavily based on pxa255_idp platform + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <serial.h> +#include <asm/arch/hardware.h> +#include <spi.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_SPI +void lcd_start(void); +#else +inline void lcd_start(void) {}; +#endif + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of Lubbock-Board */ + gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + /* Enable LCD */ + lcd_start(); + + return 0; +} + +int board_late_init(void) +{ + setenv("stdout", "serial"); + setenv("stderr", "serial"); + return 0; +} + +struct serial_device *default_serial_console (void) +{ + return &serial_stuart_device; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#ifdef CONFIG_CMD_SPI + +struct { + unsigned char reg; + unsigned short data; + unsigned char mdelay; +} lcd_data[] = { + { 0x07, 0x0000, 0 }, + { 0x13, 0x0000, 10 }, + { 0x11, 0x3004, 0 }, + { 0x14, 0x200F, 0 }, + { 0x10, 0x1a20, 0 }, + { 0x13, 0x0040, 50 }, + { 0x13, 0x0060, 0 }, + { 0x13, 0x0070, 200 }, + { 0x01, 0x0127, 0 }, + { 0x02, 0x0700, 0 }, + { 0x03, 0x1030, 0 }, + { 0x08, 0x0208, 0 }, + { 0x0B, 0x0620, 0 }, + { 0x0C, 0x0110, 0 }, + { 0x30, 0x0120, 0 }, + { 0x31, 0x0127, 0 }, + { 0x32, 0x0000, 0 }, + { 0x33, 0x0503, 0 }, + { 0x34, 0x0727, 0 }, + { 0x35, 0x0124, 0 }, + { 0x36, 0x0706, 0 }, + { 0x37, 0x0701, 0 }, + { 0x38, 0x0F00, 0 }, + { 0x39, 0x0F00, 0 }, + { 0x40, 0x0000, 0 }, + { 0x41, 0x0000, 0 }, + { 0x42, 0x013f, 0 }, + { 0x43, 0x0000, 0 }, + { 0x44, 0x013f, 0 }, + { 0x45, 0x0000, 0 }, + { 0x46, 0xef00, 0 }, + { 0x47, 0x013f, 0 }, + { 0x48, 0x0000, 0 }, + { 0x07, 0x0015, 30 }, + { 0x07, 0x0017, 0 }, + { 0x20, 0x0000, 0 }, + { 0x21, 0x0000, 0 }, + { 0x22, 0x0000, 0 }, +}; + +void zipitz2_spi_sda(int set) +{ + /* GPIO 13 */ + if (set) + GPSR0 = (1 << 13); + else + GPCR0 = (1 << 13); +} + +void zipitz2_spi_scl(int set) +{ + /* GPIO 22 */ + if (set) + GPCR0 = (1 << 22); + else + GPSR0 = (1 << 22); +} + +unsigned char zipitz2_spi_read(void) +{ + /* GPIO 40 */ + return !!(GPLR1 & (1 << 8)); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + /* Always valid */ + return 1; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* GPIO 88 low */ + GPCR2 = (1 << 24); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* GPIO 88 high */ + GPSR2 = (1 << 24); + +} + +void lcd_start(void) +{ + int i; + unsigned char reg[3] = { 0x74, 0x00, 0 }; + unsigned char data[3] = { 0x76, 0, 0 }; + unsigned char dummy[3] = { 0, 0, 0 }; + + /* PWM2 AF */ + GAFR0_L |= 0x00800000; + /* Enable clock to all PWM */ + CKEN |= 0x3; + /* Configure PWM2 */ + PWM_CTRL2 = 0x4f; + PWM_PWDUTY2 = 0x2ff; + PWM_PERVAL2 = 792; + + /* Toggle the reset pin to reset the LCD */ + GPSR0 = (1 << 19); + udelay(100000); + GPCR0 = (1 << 19); + udelay(20000); + GPSR0 = (1 << 19); + udelay(20000); + + /* Program the LCD init sequence */ + for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) { + reg[0] = 0x74; + reg[1] = 0x0; + reg[2] = lcd_data[i].reg; + spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END); + + data[0] = 0x76; + data[1] = lcd_data[i].data >> 8; + data[2] = lcd_data[i].data & 0xff; + spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END); + + if (lcd_data[i].mdelay) + udelay(lcd_data[i].mdelay * 1000); + } + + GPSR0 = (1 << 11); +} +#endif @@ -45,13 +45,14 @@ pm9261 arm arm926ejs - ronetix at91 pm9263 arm arm926ejs - ronetix at91 suen3 arm arm926ejs km_arm keymile kirkwood rd6281a arm arm926ejs - Marvell kirkwood -mx51evk arm arm_cortexa8 mx51evk freescale mx51 +mx51evk arm armv7 mx51evk freescale mx51 actux1 arm ixp actux2 arm ixp actux3 arm ixp actux4 arm ixp ixdp425 arm ixp cerf250 arm pxa +colibri_pxa270 arm pxa cradle arm pxa csb226 arm pxa delta arm pxa @@ -61,6 +62,7 @@ lubbock arm pxa pleb2 arm pxa xaeniax arm pxa xm250 arm pxa +zipitz2 arm pxa B2 arm s3c44b0 - dave assabet arm sa1100 dnp1110 arm sa1100 @@ -75,9 +77,6 @@ M5272C3 m68k mcf52x2 m5272c3 freescale EP2500 m68k mcf52x2 ep2500 Mercury purple mips mips tb0229 mips mips -EP1C20 nios2 nios2 ep1c20 altera -EP1S10 nios2 nios2 ep1s10 altera -EP1S40 nios2 nios2 ep1s40 altera PCI5441 nios2 nios2 pci5441 psyent PK1C20 nios2 nios2 pk1c20 psyent P3G4 powerpc 74xx_7xx evb64260 @@ -132,6 +131,7 @@ ZPC1900 powerpc mpc8260 zpc1900 mgcoge powerpc mpc8260 - keymile SCM powerpc mpc8260 - siemens TQM8272 powerpc mpc8260 tqm8272 tqc +ve8313 powerpc mpc83xx ve8313 kmeter1 powerpc mpc83xx kmeter1 keymile MVBLM7 powerpc mpc83xx mvblm7 matrix_vision TQM834x powerpc mpc83xx tqm834x tqc @@ -143,7 +143,6 @@ EP88x powerpc mpc8xx ep88x ETX094 powerpc mpc8xx etx094 FLAGADM powerpc mpc8xx flagadm GENIETV powerpc mpc8xx genietv -GTH powerpc mpc8xx gth hermes powerpc mpc8xx IP860 powerpc mpc8xx ip860 LANTEC powerpc mpc8xx lantec @@ -255,17 +254,19 @@ imx27lite arm arm926ejs imx27lite logicpd mx27 magnesium arm arm926ejs imx27lite logicpd mx27 omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x -omap3_overo arm arm_cortexa8 overo - omap3 -omap3_pandora arm arm_cortexa8 pandora - omap3 -omap3_zoom1 arm arm_cortexa8 zoom1 logicpd omap3 -omap3_zoom2 arm arm_cortexa8 zoom2 logicpd omap3 -omap3_beagle arm arm_cortexa8 beagle ti omap3 -omap3_evm arm arm_cortexa8 evm ti omap3 -omap3_sdp3430 arm arm_cortexa8 sdp3430 ti omap3 -am3517_evm arm arm_cortexa8 am3517evm logicpd omap3 -devkit8000 arm arm_cortexa8 devkit8000 timll omap3 -s5p_goni arm arm_cortexa8 goni samsung s5pc1xx -smdkc100 arm arm_cortexa8 smdkc100 samsung s5pc1xx +omap3_overo arm armv7 overo - omap3 +omap3_pandora arm armv7 pandora - omap3 +omap3_zoom1 arm armv7 zoom1 logicpd omap3 +omap3_zoom2 arm armv7 zoom2 logicpd omap3 +omap3_beagle arm armv7 beagle ti omap3 +omap3_evm arm armv7 evm ti omap3 +omap3_sdp3430 arm armv7 sdp3430 ti omap3 +omap4_panda arm armv7 panda ti omap4 +omap4_sdp4430 arm armv7 sdp4430 ti omap4 +am3517_evm arm armv7 am3517evm logicpd omap3 +devkit8000 arm armv7 devkit8000 timll omap3 +s5p_goni arm armv7 goni samsung s5pc1xx +smdkc100 arm armv7 smdkc100 samsung s5pc1xx ixdpg425 arm ixp lpd7a400 arm lh7a40x lpd7a40x lpd7a404 arm lh7a40x lpd7a40x @@ -282,6 +283,7 @@ favr-32-ezkit avr32 at32ap - earthlcd at32ap700x hammerhead avr32 at32ap - miromico at32ap700x bf518f-ezbrd blackfin blackfin bf526-ezbrd blackfin blackfin +bf527-ad7160-eval blackfin blackfin bf527-ezkit blackfin blackfin bf533-ezkit blackfin blackfin bf533-stamp blackfin blackfin @@ -331,6 +333,7 @@ ppmc8260 powerpc mpc8260 RPXsuper powerpc mpc8260 rpxsuper rsdproto powerpc mpc8260 MPC8266ADS powerpc mpc8260 mpc8266ads freescale +MPC8308RDB powerpc mpc83xx mpc8308rdb freescale MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale MPC8349EMDS powerpc mpc83xx mpc8349emds freescale MPC837XERDB powerpc mpc83xx mpc837xerdb freescale @@ -342,6 +345,7 @@ MPC8560ADS powerpc mpc85xx mpc8560ads freescale MPC8568MDS powerpc mpc85xx mpc8568mds freescale XPEDITE5200 powerpc mpc85xx xpedite5200 xes XPEDITE5370 powerpc mpc85xx xpedite5370 xes +P1022DS powerpc mpc85xx p1022ds freescale sbc8641d powerpc mpc86xx MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale XPEDITE5170 powerpc mpc86xx xpedite5170 xes diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index d01ee19..2bd62e2 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -84,10 +84,8 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) addr = dis_last_addr; len = dis_last_len; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { /* New command */ @@ -125,10 +123,8 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* -------------------------------------------------- */ int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); printf ("\nEnter '.' when done\n"); mem_addr = simple_strtoul (argv[1], NULL, 16); diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index 5ec798c..d51cc55 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -102,8 +102,7 @@ static int do_bmp_info(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[ addr = simple_strtoul(argv[1], NULL, 16); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return (bmp_info(addr)); @@ -127,8 +126,7 @@ static int do_bmp_display(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar y = simple_strtoul(argv[3], NULL, 10); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return (bmp_display(addr, x, y)); @@ -159,12 +157,10 @@ static int do_bmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) c = find_cmd_tbl(argv[0], &cmd_bmp_sub[0], ARRAY_SIZE(cmd_bmp_sub)); - if (c) { + if (c) return c->cmd(cmdtp, flag, argc, argv); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 9ccc8c7..72dacaa 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -40,10 +40,8 @@ int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr, rc; int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index bf77fb4..adfa6cd 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -491,17 +491,14 @@ int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv argv++; return bootm_start(cmdtp, flag, argc, argv); } - } - /* Unrecognized command */ - else { - cmd_usage(cmdtp); - return 1; + } else { + /* Unrecognized command */ + return cmd_usage(cmdtp); } if (images.state >= state) { printf ("Trying to execute a command out of order\n"); - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } images.state |= state; diff --git a/common/cmd_cache.c b/common/cmd_cache.c index be87b5c..5cdd834 100644 --- a/common/cmd_cache.c +++ b/common/cmd_cache.c @@ -34,10 +34,6 @@ int do_icache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 2: /* on / off */ switch (on_off(argv[1])) { -#if 0 /* prevented by varargs handling; FALLTROUGH is harmless, too */ - default: cmd_usage(cmdtp); - return; -#endif case 0: icache_disable(); break; case 1: icache_enable (); @@ -49,8 +45,7 @@ int do_icache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) icache_status() ? "ON" : "OFF"); return 0; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; } @@ -60,10 +55,6 @@ int do_dcache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 2: /* on / off */ switch (on_off(argv[1])) { -#if 0 /* prevented by varargs handling; FALLTROUGH is harmless, too */ - default: cmd_usage(cmdtp); - return; -#endif case 0: dcache_disable(); break; case 1: dcache_enable (); @@ -75,8 +66,7 @@ int do_dcache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) dcache_status() ? "ON" : "OFF"); return 0; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c index 45de8cd..45fe66a 100644 --- a/common/cmd_dcr.c +++ b/common/cmd_dcr.c @@ -44,10 +44,8 @@ int do_getdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) unsigned long get_dcr (unsigned short); /* Validate arguments */ - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); /* Get a DCR */ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16); @@ -73,10 +71,8 @@ int do_setdcr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) extern char console_buffer[]; /* Validate arguments */ - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); /* Set a DCR */ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16); @@ -120,10 +116,8 @@ int do_getidcr (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char buf[80]; /* Validate arguments */ - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* Find out whether ther is '.' (dot) symbol in the first parameter. */ strncpy (buf, argv[1], sizeof(buf)-1); @@ -176,10 +170,8 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) char buf[80]; /* Validate arguments */ - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* Find out whether ther is '.' (dot) symbol in the first parameter. */ strncpy (buf, argv[1], sizeof(buf)-1); diff --git a/common/cmd_df.c b/common/cmd_df.c index 6a08666..9a3c84c 100644 --- a/common/cmd_df.c +++ b/common/cmd_df.c @@ -27,8 +27,7 @@ static int do_df(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 129162c..9f4b22c 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -104,8 +104,7 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } #endif diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 49021cd..35fb361 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -65,10 +65,9 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; int part_length; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); + dev = (int)simple_strtoul (argv[2], &ep, 16); dev_desc = get_dev(argv[1],dev); @@ -164,8 +163,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!filename) { diff --git a/common/cmd_fat.c b/common/cmd_fat.c index ede7308..0220494 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -45,39 +45,43 @@ int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *ep; if (argc < 5) { - printf ("usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]\n"); + printf( "usage: fatload <interface> <dev[:part]> " + "<addr> <filename> [bytes]\n"); return 1; } - dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); - if (dev_desc==NULL) { - puts ("\n** Invalid boot device **\n"); + + dev = (int)simple_strtoul(argv[2], &ep, 16); + dev_desc = get_dev(argv[1],dev); + if (dev_desc == NULL) { + puts("\n** Invalid boot device **\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = (int)simple_strtoul(++ep, NULL, 16); } if (fat_register_device(dev_desc,part)!=0) { - printf ("\n** Unable to use %s %d:%d for fatload **\n",argv[1],dev,part); + printf("\n** Unable to use %s %d:%d for fatload **\n", + argv[1], dev, part); return 1; } - offset = simple_strtoul (argv[3], NULL, 16); + offset = simple_strtoul(argv[3], NULL, 16); if (argc == 6) - count = simple_strtoul (argv[5], NULL, 16); + count = simple_strtoul(argv[5], NULL, 16); else count = 0; - size = file_fat_read (argv[4], (unsigned char *) offset, count); + size = file_fat_read(argv[4], (unsigned char *)offset, count); if(size==-1) { - printf("\n** Unable to read \"%s\" from %s %d:%d **\n",argv[4],argv[1],dev,part); + printf("\n** Unable to read \"%s\" from %s %d:%d **\n", + argv[4], argv[1], dev, part); return 1; } - printf ("\n%ld bytes read\n", size); + printf("\n%ld bytes read\n", size); sprintf(buf, "%lX", size); setenv("filesize", buf); @@ -104,34 +108,35 @@ int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; if (argc < 3) { - printf ("usage: fatls <interface> <dev[:part]> [directory]\n"); - return (0); + printf("usage: fatls <interface> <dev[:part]> [directory]\n"); + return 0; } - dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); - if (dev_desc==NULL) { - puts ("\n** Invalid boot device **\n"); + dev = (int)simple_strtoul(argv[2], &ep, 16); + dev_desc = get_dev(argv[1],dev); + if (dev_desc == NULL) { + puts("\n** Invalid boot device **\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = (int)simple_strtoul(++ep, NULL, 16); } if (fat_register_device(dev_desc,part)!=0) { - printf ("\n** Unable to use %s %d:%d for fatls **\n",argv[1],dev,part); + printf("\n** Unable to use %s %d:%d for fatls **\n", + argv[1], dev, part); return 1; } if (argc == 4) - ret = file_fat_ls (argv[3]); + ret = file_fat_ls(argv[3]); else - ret = file_fat_ls (filename); + ret = file_fat_ls(filename); if(ret!=0) printf("No Fat FS detected\n"); - return (ret); + return ret; } U_BOOT_CMD( @@ -149,27 +154,28 @@ int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; if (argc < 2) { - printf ("usage: fatinfo <interface> <dev[:part]>\n"); - return (0); + printf("usage: fatinfo <interface> <dev[:part]>\n"); + return 0; } - dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); - if (dev_desc==NULL) { - puts ("\n** Invalid boot device **\n"); + dev = (int)simple_strtoul(argv[2], &ep, 16); + dev_desc = get_dev(argv[1],dev); + if (dev_desc == NULL) { + puts("\n** Invalid boot device **\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = (int)simple_strtoul(++ep, NULL, 16); } if (fat_register_device(dev_desc,part)!=0) { - printf ("\n** Unable to use %s %d:%d for fatinfo **\n",argv[1],dev,part); + printf("\n** Unable to use %s %d:%d for fatinfo **\n", + argv[1], dev, part); return 1; } - return (file_fat_detectfs ()); + return file_fat_detectfs(); } U_BOOT_CMD( @@ -178,143 +184,3 @@ U_BOOT_CMD( "<interface> <dev[:part]>\n" " - print information about filesystem from 'dev' on 'interface'" ); - -#ifdef NOT_IMPLEMENTED_YET -/* find first device whose first partition is a DOS filesystem */ -int find_fat_partition (void) -{ - int i, j; - block_dev_desc_t *dev_desc; - unsigned char *part_table; - unsigned char buffer[ATA_BLOCKSIZE]; - - for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) { - dev_desc = ide_get_dev (i); - if (!dev_desc) { - debug ("couldn't get ide device!\n"); - return (-1); - } - if (dev_desc->part_type == PART_TYPE_DOS) { - if (dev_desc-> - block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { - debug ("can't perform block_read!\n"); - return (-1); - } - part_table = &buffer[0x1be]; /* start with partition #4 */ - for (j = 0; j < 4; j++) { - if ((part_table[4] == 1 || /* 12-bit FAT */ - part_table[4] == 4 || /* 16-bit FAT */ - part_table[4] == 6) && /* > 32Meg part */ - part_table[0] == 0x80) { /* bootable? */ - curr_dev = i; - part_offset = part_table[11]; - part_offset <<= 8; - part_offset |= part_table[10]; - part_offset <<= 8; - part_offset |= part_table[9]; - part_offset <<= 8; - part_offset |= part_table[8]; - debug ("found partition start at %ld\n", part_offset); - return (0); - } - part_table += 16; - } - } - } - - debug ("no valid devices found!\n"); - return (-1); -} - -int -do_fat_dump (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char * const argv[]) -{ - __u8 block[1024]; - int ret; - int bknum; - - ret = 0; - - if (argc != 2) { - printf ("needs an argument!\n"); - return (0); - } - - bknum = simple_strtoul (argv[1], NULL, 10); - - if (disk_read (0, bknum, block) != 0) { - printf ("Error: reading block\n"); - return -1; - } - printf ("FAT dump: %d\n", bknum); - hexdump (512, block); - - return (ret); -} - -int disk_read (__u32 startblock, __u32 getsize, __u8 *bufptr) -{ - ulong tot; - block_dev_desc_t *dev_desc; - - if (curr_dev < 0) { - if (find_fat_partition () != 0) - return (-1); - } - - dev_desc = ide_get_dev (curr_dev); - if (!dev_desc) { - debug ("couldn't get ide device\n"); - return (-1); - } - - tot = dev_desc->block_read (0, startblock + part_offset, - getsize, (ulong *) bufptr); - - /* should we do this here? - flush_cache ((ulong)buf, cnt*ide_dev_desc[device].blksz); - */ - - if (tot == getsize) - return (0); - - debug ("unable to read from device!\n"); - - return (-1); -} - - -static int isprint (unsigned char ch) -{ - if (ch >= 32 && ch < 127) - return (1); - - return (0); -} - - -void hexdump (int cnt, unsigned char *data) -{ - int i; - int run; - int offset; - - offset = 0; - while (cnt) { - printf ("%04X : ", offset); - if (cnt >= 16) - run = 16; - else - run = cnt; - cnt -= run; - for (i = 0; i < run; i++) - printf ("%02X ", (unsigned int) data[i]); - printf (": "); - for (i = 0; i < run; i++) - printf ("%c", isprint (data[i]) ? data[i] : '.'); - printf ("\n"); - data = &data[16]; - offset += run; - } -} -#endif /* NOT_IMPLEMENTED_YET */ diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index 486d5d4..831a07f 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -741,8 +741,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_drive=simple_strtoul(argv[2], NULL, 10); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* setup FDC and scan for drives */ if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) { diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c index 00f7e88..a8822d9 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c @@ -73,8 +73,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) name = argv [2]; break; default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } /* Init physical layer */ diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index cd4c6de..3d0c2b7 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -65,14 +65,12 @@ void set_working_fdt_addr(void *addr) */ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); - /******************************************************************** + /* * Set the address of the fdt - ********************************************************************/ + */ if (argv[1][0] == 'a') { unsigned long addr; /* @@ -116,18 +114,16 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } - /******************************************************************** + /* * Move the working_fdt - ********************************************************************/ + */ } else if (strncmp(argv[1], "mo", 2) == 0) { struct fdt_header *newaddr; int len; int err; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* * Set the address and length of the fdt. @@ -166,9 +162,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } working_fdt = newaddr; - /******************************************************************** + /* * Make a new node - ********************************************************************/ + */ } else if (strncmp(argv[1], "mk", 2) == 0) { char *pathp; /* path */ char *nodep; /* new node to add */ @@ -178,10 +174,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* * Parameters: Node path, new node to be appended to the path. */ - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); pathp = argv[2]; nodep = argv[3]; @@ -202,9 +196,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - /******************************************************************** + /* * Set the value of a property in the working_fdt. - ********************************************************************/ + */ } else if (argv[1][0] == 's') { char *pathp; /* path */ char *prop; /* property */ @@ -216,10 +210,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* * Parameters: Node path, property, optional value. */ - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); pathp = argv[2]; prop = argv[3]; @@ -247,9 +239,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - /******************************************************************** + /* * Print (recursive) / List (single level) - ********************************************************************/ + */ } else if ((argv[1][0] == 'p') || (argv[1][0] == 'l')) { int depth = MAX_LEVEL; /* how deep to print */ char *pathp; /* path */ @@ -281,9 +273,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) if (ret != 0) return ret; - /******************************************************************** + /* * Remove a property/node - ********************************************************************/ + */ } else if (strncmp(argv[1], "rm", 2) == 0) { int nodeoffset; /* node offset from libfdt */ int err; @@ -321,9 +313,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } - /******************************************************************** + /* * Display header info - ********************************************************************/ + */ } else if (argv[1][0] == 'h') { u32 version = fdt_version(working_fdt); printf("magic:\t\t\t0x%x\n", fdt_magic(working_fdt)); @@ -351,16 +343,16 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) fdt_num_mem_rsv(working_fdt)); printf("\n"); - /******************************************************************** + /* * Set boot cpu id - ********************************************************************/ + */ } else if (strncmp(argv[1], "boo", 3) == 0) { unsigned long tmp = simple_strtoul(argv[2], NULL, 16); fdt_set_boot_cpuid_phys(working_fdt, tmp); - /******************************************************************** + /* * memory command - ********************************************************************/ + */ } else if (strncmp(argv[1], "me", 2) == 0) { uint64_t addr, size; int err; @@ -370,9 +362,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) if (err < 0) return err; - /******************************************************************** + /* * mem reserve commands - ********************************************************************/ + */ } else if (strncmp(argv[1], "rs", 2) == 0) { if (argv[2][0] == 'p') { uint64_t addr, size; @@ -417,8 +409,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } } #ifdef CONFIG_OF_BOARD_SETUP @@ -430,10 +421,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) else if (argv[1][0] == 'c') { unsigned long initrd_start = 0, initrd_end = 0; - if ((argc != 2) && (argc != 4)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc != 2) && (argc != 4)) + return cmd_usage(cmdtp); if (argc == 4) { initrd_start = simple_strtoul(argv[2], NULL, 16); @@ -449,8 +438,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 5d8fb7a..ff43965 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -332,10 +332,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (strcmp(argv[1], "all") == 0) { for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { @@ -383,10 +381,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "bank") == 0) { bank = simple_strtoul(argv[2], NULL, 16); @@ -406,10 +402,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } + if (addr_first >= addr_last) + return cmd_usage(cmdtp); rcode = flash_sect_erase(addr_first, addr_last); return rcode; @@ -482,19 +476,15 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int p; int rcode = 0; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); - if (strcmp(argv[1], "off") == 0) { + if (strcmp(argv[1], "off") == 0) p = 0; - } else if (strcmp(argv[1], "on") == 0) { + else if (strcmp(argv[1], "on") == 0) p = 1; - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); #ifdef CONFIG_HAS_DATAFLASH if ((strcmp(argv[2], "all") != 0) && (strcmp(argv[2], "bank") != 0)) { @@ -592,10 +582,8 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); if (strcmp(argv[2], "bank") == 0) { bank = simple_strtoul(argv[3], NULL, 16); @@ -634,10 +622,9 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } + if (addr_first >= addr_last) + return cmd_usage(cmdtp); + rcode = flash_sect_protect (p, addr_first, addr_last); #endif /* CONFIG_SYS_NO_FLASH */ return rcode; diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index ddc7a05..e50c9de 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -44,7 +44,6 @@ #endif /* Local functions */ -static void fpga_usage (cmd_tbl_t * cmdtp); static int fpga_get_op (char *opstr); /* Local defines */ @@ -232,8 +231,7 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) switch (op) { case FPGA_NONE: - fpga_usage (cmdtp); - break; + return cmd_usage(cmdtp); case FPGA_INFO: rc = fpga_info (dev); @@ -312,17 +310,11 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) default: printf ("Unknown operation\n"); - fpga_usage (cmdtp); - break; + return cmd_usage(cmdtp); } return (rc); } -static void fpga_usage (cmd_tbl_t * cmdtp) -{ - cmd_usage(cmdtp); -} - /* * Map op to supported operations. We don't use a table since we * would just have to relocate it from flash anyway. diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index fb9d3b0..371e022 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -184,10 +184,8 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv uint devaddr, alen, length; u_char *memaddr; - if (argc != 5) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 5) + return cmd_usage(cmdtp); /* * I2C chip address @@ -200,10 +198,8 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv */ devaddr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Length is the number of objects, not number of bytes. @@ -240,10 +236,8 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] alen = i2c_dp_last_alen; length = i2c_dp_last_length; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { /* @@ -261,10 +255,8 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * If another parameter, it is the length to display. @@ -332,10 +324,8 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] uchar byte; int count; - if ((argc < 4) || (argc > 5)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc < 4) || (argc > 5)) + return cmd_usage(cmdtp); /* * Chip is always specified. @@ -347,10 +337,8 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Value to write is always specified. @@ -398,10 +386,8 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ulong crc; ulong err; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* * Chip is always specified. @@ -413,10 +399,8 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Count is always specified @@ -462,10 +446,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg int nbytes; extern char console_buffer[]; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); #ifdef CONFIG_BOOT_RETRY_TIME reset_cmd_timeout(); /* got a good command to get here */ @@ -495,10 +477,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); } /* @@ -628,10 +608,8 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] u_char bytes[16]; int delay; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* * Chip is always specified. @@ -643,10 +621,8 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Length is the number of objects, not number of bytes. @@ -784,10 +760,9 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) "32 MiB", "16 MiB", "8 MiB", "4 MiB" }; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + /* * Chip is always specified. */ @@ -1322,12 +1297,10 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) c = find_cmd_tbl(argv[0], &cmd_i2c_sub[0], ARRAY_SIZE(cmd_i2c_sub)); - if (c) { + if (c) return c->cmd(cmdtp, flag, argc, argv); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); } /***************************************************/ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index d486697..c0fb88d 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -179,8 +179,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 0: case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: if (strncmp(argv[1],"res",3) == 0) { puts ("\nReset IDE" @@ -229,8 +228,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1],"dev",3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); @@ -278,8 +276,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: /* at least 4 args */ @@ -332,14 +329,12 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("%ld blocks written: %s\n", n, (n==cnt) ? "OK" : "ERROR"); - if (n==cnt) { + if (n==cnt) return 0; - } else { + else return 1; - } } else { - cmd_usage(cmdtp); - rcode = 1; + return cmd_usage(cmdtp); } return rcode; @@ -374,9 +369,8 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_device = argv[2]; break; default: - cmd_usage(cmdtp); show_boot_progress (-42); - return 1; + return cmd_usage(cmdtp); } show_boot_progress (42); diff --git a/common/cmd_irq.c b/common/cmd_irq.c index 4888328..d35a43f 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -27,17 +27,14 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); /* on */ - if (strncmp(argv[1], "on", 2) == 0) { + if (strncmp(argv[1], "on", 2) == 0) enable_interrupts(); - } else { + else disable_interrupts(); - } return 0; } diff --git a/common/cmd_itest.c b/common/cmd_itest.c index e88d6e0..8dd8927 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -165,10 +165,8 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) int value, w; /* Validate arguments */ - if ((argc != 4)){ - cmd_usage(cmdtp); - return 1; - } + if ((argc != 4)) + return cmd_usage(cmdtp); /* Check for a data width specification. * Defaults to long (4) if no specification. diff --git a/common/cmd_load.c b/common/cmd_load.c index 52ed1fa..dad0303 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -1102,7 +1102,7 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (strcmp(argv[1], "on") == 0) hwflow_onoff(1); else - cmd_usage(cmdtp); + return cmd_usage(cmdtp); } printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off"); return 0; diff --git a/common/cmd_log.c b/common/cmd_log.c index 49deddd..0e89357 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -241,12 +241,10 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } } diff --git a/common/cmd_mem.c b/common/cmd_mem.c index bcea399..44834ea 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -76,10 +76,8 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) size = dp_last_size; length = dp_last_length; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { /* New command specified. Check for a size specification. @@ -172,10 +170,8 @@ int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr, writeval, count; int size; - if ((argc < 3) || (argc > 4)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc < 3) || (argc > 4)) + return cmd_usage(cmdtp); /* Check for size specification. */ @@ -216,10 +212,8 @@ int do_mem_mdc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; ulong count; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); count = simple_strtoul(argv[3], NULL, 10); @@ -245,10 +239,8 @@ int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; ulong count; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); count = simple_strtoul(argv[3], NULL, 10); @@ -276,10 +268,8 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int size; int rcode = 0; - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); /* Check for size specification. */ @@ -360,10 +350,8 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr, dest, count; int size; - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); /* Check for size specification. */ @@ -484,10 +472,8 @@ int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) volatile ushort *shortp; volatile u_char *cp; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* Check for a size spefication. * Defaults to long if no or incorrect specification. @@ -555,10 +541,8 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) volatile ushort *shortp; volatile u_char *cp; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* Check for a size spefication. * Defaults to long if no or incorrect specification. @@ -990,10 +974,8 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) int nbytes, size; extern char console_buffer[]; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); #ifdef CONFIG_BOOT_RETRY_TIME reset_cmd_timeout(); /* got a good command to get here */ @@ -1095,10 +1077,8 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong crc; ulong *ptr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul (argv[1], NULL, 16); addr += base_address; @@ -1131,9 +1111,8 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char * const *av; if (argc < 3) { - usage: - cmd_usage(cmdtp); - return 1; +usage: + return cmd_usage(cmdtp); } av = argv + 1; @@ -1181,10 +1160,8 @@ int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned int i; u8 output[16]; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); len = simple_strtoul(argv[2], NULL, 16); @@ -1206,10 +1183,8 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned int i; u8 output[20]; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); len = simple_strtoul(argv[2], NULL, 16); @@ -1239,8 +1214,7 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) dst = simple_strtoul(argv[2], NULL, 16); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return !!gunzip((void *) dst, dst_len, (void *) src, &src_len); diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index eeef2cd..00180b0 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -37,17 +37,14 @@ int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) unsigned int num; unsigned int blocking; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16); blocking = (unsigned int)simple_strtoul (argv[2], NULL, 16); if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) { puts ("Bad number of FSL\n"); - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } switch (fslnum) { @@ -195,18 +192,14 @@ int do_fwr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) unsigned int num; unsigned int blocking; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16); num = (unsigned int)simple_strtoul (argv[2], NULL, 16); blocking = (unsigned int)simple_strtoul (argv[3], NULL, 16); - if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) { - cmd_usage(cmdtp); - return 1; - } + if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) + return cmd_usage(cmdtp); switch (fslnum) { #if (XILINX_FSL_NUMBER > 0) @@ -353,10 +346,9 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) unsigned int reg = 0; unsigned int val = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + reg = (unsigned int)simple_strtoul (argv[1], NULL, 16); val = (unsigned int)simple_strtoul (argv[2], NULL, 16); switch (reg) { diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 1619a25..bb94186 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -301,10 +301,8 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) int rcode = 0; char *devname; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); #if defined(CONFIG_MII_INIT) mii_init (); @@ -431,8 +429,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) else miiphy_set_current_dev (argv[2]); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 8439da2..061b1bb 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -32,17 +32,15 @@ int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong start = get_timer(0); ulong delay; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ; while (get_timer(start) < delay) { - if (ctrlc ()) { + if (ctrlc ()) return (-1); - } + udelay (100); } diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 698157f..e5f5e94 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -32,10 +32,8 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int dev; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (strcmp(argv[1], "init") == 0) { if (argc == 2) { @@ -46,8 +44,7 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } else if (argc == 3) { dev = (int)simple_strtoul(argv[2], NULL, 10); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (mmc_legacy_init(dev) != 0) { @@ -72,14 +69,12 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif curr_device = dev; } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } printf("mmc%d is current device\n", curr_device); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 4d7b871..f19bf41 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -28,10 +28,8 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long cpuid; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); cpuid = simple_strtoul(argv[1], NULL, 10); if (cpuid >= cpu_numcores()) { @@ -42,29 +40,24 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc == 3) { - if (strncmp(argv[2], "reset", 5) == 0) { + if (strncmp(argv[2], "reset", 5) == 0) cpu_reset(cpuid); - } else if (strncmp(argv[2], "status", 6) == 0) { + else if (strncmp(argv[2], "status", 6) == 0) cpu_status(cpuid); - } else if (strncmp(argv[2], "disable", 7) == 0) { + else if (strncmp(argv[2], "disable", 7) == 0) return cpu_disable(cpuid); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); + return 0; } /* 4 or greater, make sure its release */ - if (strncmp(argv[2], "release", 7) != 0) { - cmd_usage(cmdtp); - return 1; - } + if (strncmp(argv[2], "release", 7) != 0) + return cmd_usage(cmdtp); - if (cpu_release(cpuid, argc - 3, argv + 3)) { - cmd_usage(cmdtp); - return 1; - } + if (cpu_release(cpuid, argc - 3, argv + 3)) + return cmd_usage(cmdtp); return 0; } diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 447486b..ceec5a9 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -1845,8 +1845,7 @@ int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return delete_partition(argv[2]); } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /***************************************************/ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index ea80555..0f47a25 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -4,6 +4,10 @@ * (c) 1999 Machine Vision Holdings, Inc. * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> * + * Ported 'dynenv' to 'nand env.oob' command + * (C) 2010 Nanometrics, Inc. + * 'dynenv' -- Dynamic environment offset in NAND OOB + * (C) Copyright 2006-2007 OpenMoko, Inc. * Added 16-bit nand support * (C) 2004 Texas Instruments */ @@ -193,6 +197,89 @@ static void do_nand_status(nand_info_t *nand) } #endif +#ifdef CONFIG_ENV_OFFSET_OOB +unsigned long nand_env_oob_offset; + +int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand, + int argc, char * const argv[]) +{ + int ret; + uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)]; + + char *cmd = argv[1]; + + if (!strcmp(cmd, "get")) { + ret = get_nand_env_oob(nand, &nand_env_oob_offset); + if (ret) + return 1; + + printf("0x%08lx\n", nand_env_oob_offset); + } else if (!strcmp(cmd, "set")) { + ulong addr; + size_t dummy_size; + struct mtd_oob_ops ops; + + if (argc < 3) + goto usage; + + if (arg_off_size(argc - 2, argv + 2, nand, &addr, + &dummy_size) < 0) { + printf("Offset or partition name expected\n"); + return 1; + } + + if (nand->oobavail < ENV_OFFSET_SIZE) { + printf("Insufficient available OOB bytes:\n" + "%d OOB bytes available but %d required for " + "env.oob support\n", + nand->oobavail, ENV_OFFSET_SIZE); + return 1; + } + + if ((addr & (nand->erasesize - 1)) != 0) { + printf("Environment offset must be block-aligned\n"); + return 1; + } + + ops.datbuf = NULL; + ops.mode = MTD_OOB_AUTO; + ops.ooboffs = 0; + ops.ooblen = ENV_OFFSET_SIZE; + ops.oobbuf = (void *) oob_buf; + + oob_buf[0] = ENV_OOB_MARKER; + oob_buf[1] = addr / nand->erasesize; + + ret = nand->write_oob(nand, ENV_OFFSET_SIZE, &ops); + if (ret) { + printf("Error writing OOB block 0\n"); + return ret; + } + + ret = get_nand_env_oob(nand, &nand_env_oob_offset); + if (ret) { + printf("Error reading env offset in OOB\n"); + return ret; + } + + if (addr != nand_env_oob_offset) { + printf("Verification of env offset in OOB failed: " + "0x%08lx expected but got 0x%08lx\n", + addr, nand_env_oob_offset); + return 1; + } + } else { + goto usage; + } + + return ret; + +usage: + return cmd_usage(cmdtp); +} + +#endif + static void nand_print_info(int idx) { nand_info_t *nand = &nand_info[idx]; @@ -272,9 +359,21 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 && strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 && strcmp(cmd, "biterr") != 0 && - strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 ) + strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 +#ifdef CONFIG_ENV_OFFSET_OOB + && strcmp(cmd, "env.oob") != 0 +#endif + ) goto usage; +#ifdef CONFIG_ENV_OFFSET_OOB + /* this command operates only on the first nand device */ + if (strcmp(cmd, "env.oob") == 0) { + return do_nand_env_oob(cmdtp, &nand_info[0], + argc - 1, argv + 1); + } +#endif + /* the following commands operate on the current device */ if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[nand_curr_device].name) { @@ -477,8 +576,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #endif usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, @@ -502,6 +600,13 @@ U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, " bring nand to lock state or display locked pages\n" "nand unlock [offset] [size] - unlock section" #endif +#ifdef CONFIG_ENV_OFFSET_OOB + "\n" + "nand env.oob - environment offset in OOB of block 0 of" + " first device.\n" + "nand env.oob set off|partition - set enviromnent offset\n" + "nand env.oob get - get environment offset" +#endif ); static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, @@ -652,9 +757,8 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_CMD_MTDPARTS) usage: #endif - cmd_usage(cmdtp); show_boot_progress(-53); - return 1; + return cmd_usage(cmdtp); } show_boot_progress(53); diff --git a/common/cmd_net.c b/common/cmd_net.c index 3cdb07f..3ffb9df 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -186,9 +186,9 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char * const argv[]) break; - default: cmd_usage(cmdtp); + default: show_boot_progress (-80); - return 1; + return cmd_usage(cmdtp); } show_boot_progress (80); @@ -236,10 +236,8 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return -1; NetPingIP = string_to_ip(argv[1]); - if (NetPingIP == 0) { - cmd_usage(cmdtp); - return -1; - } + if (NetPingIP == 0) + return cmd_usage(cmdtp); if (NetLoop(PING) < 0) { printf("ping failed; host %s is not alive\n", argv[1]); @@ -342,10 +340,8 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_DNS) int do_dns(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc == 1) { - cmd_usage(cmdtp); - return -1; - } + if (argc == 1) + return cmd_usage(cmdtp); /* * We should check for a valid hostname: diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 13325bc..1198954 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -407,10 +407,8 @@ void forceenv (char *varname, char *varvalue) int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); return _do_setenv (flag, argc, argv); } @@ -433,15 +431,13 @@ int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) local_args[2] = NULL; local_args[3] = NULL; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + /* Check the syntax */ switch (argc) { case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: /* askenv envname */ sprintf (message, "Please enter '%s':", argv[1]); @@ -503,10 +499,8 @@ int do_editenv(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *init_val; int len; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); /* Set read buffer to initial value or empty sting */ init_val = getenv(argv[1]); diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index a3e46a3..83d967b 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -361,10 +361,7 @@ static int do_onenand_read(cmd_tbl_t * cmdtp, int flag, int argc, char * const a size_t retlen = 0; if (argc < 3) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); s = strchr(argv[0], '.'); if ((s != NULL) && (!strcmp(s, ".oob"))) @@ -391,10 +388,7 @@ static int do_onenand_write(cmd_tbl_t * cmdtp, int flag, int argc, char * const size_t retlen = 0; if (argc < 3) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); addr = (ulong)simple_strtoul(argv[1], NULL, 16); @@ -477,10 +471,7 @@ static int do_onenand_dump(cmd_tbl_t * cmdtp, int flag, int argc, char * const a char *s; if (argc < 2) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); s = strchr(argv[0], '.'); ofs = (int)simple_strtoul(argv[1], NULL, 16); @@ -502,10 +493,7 @@ static int do_onenand_markbad(cmd_tbl_t * cmdtp, int flag, int argc, char * cons argv += 2; if (argc <= 0) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); while (argc > 0) { addr = simple_strtoul(*argv, NULL, 16); @@ -549,12 +537,10 @@ static int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[] c = find_cmd_tbl(argv[0], &cmd_onenand_sub[0], ARRAY_SIZE(cmd_onenand_sub)); - if (c) { - return c->cmd(cmdtp, flag, argc, argv); - } else { - cmd_usage(cmdtp); - return 1; - } + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_otp.c b/common/cmd_otp.c index a8c73b5..43f7c69 100644 --- a/common/cmd_otp.c +++ b/common/cmd_otp.c @@ -88,8 +88,7 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc < 4) { usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } prompt_user = false; diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 358ca60..4bde059 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -534,8 +534,7 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /***************************************************/ diff --git a/common/cmd_portio.c b/common/cmd_portio.c index 92d61d2..4f2f499 100644 --- a/common/cmd_portio.c +++ b/common/cmd_portio.c @@ -43,13 +43,12 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) uint size = out_last_size; uint value = out_last_value; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { - /* New command specified. Check for a size specification. + /* + * New command specified. Check for a size specification. * Defaults to long if no or incorrect specification. */ size = cmd_get_data_size (argv[0], 1); @@ -102,13 +101,12 @@ int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) uint addr = in_last_addr; uint size = in_last_size; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { - /* New command specified. Check for a size specification. + /* + * New command specified. Check for a size specification. * Defaults to long if no or incorrect specification. */ size = cmd_get_data_size (argv[0], 1); diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 94b8d58..908876c 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -33,6 +33,8 @@ extern void ppc4xx_reginfo(void); #include <mpc5xxx.h> #elif defined (CONFIG_MPC86xx) extern void mpc86xx_reginfo(void); +#elif defined(CONFIG_MPC85xx) +extern void mpc85xx_reginfo(void); #endif int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -183,6 +185,9 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #elif defined(CONFIG_MPC86xx) mpc86xx_reginfo(); +#elif defined(CONFIG_MPC85xx) + mpc85xx_reginfo(); + #elif defined(CONFIG_BLACKFIN) puts("\nSystem Configuration registers\n"); diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 2133a1f..ced1d40 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -56,10 +56,9 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; int part_length; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); + dev = (int)simple_strtoul (argv[2], &ep, 16); dev_desc = get_dev(argv[1],dev); @@ -150,8 +149,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!filename) { diff --git a/common/cmd_sata.c b/common/cmd_sata.c index 7be58e5..7efa859 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -77,8 +77,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 0: case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: if (strncmp(argv[1],"inf", 3) == 0) { int i; @@ -115,8 +114,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rc; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1], "dev", 3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); @@ -147,8 +145,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rc; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: /* at least 4 args */ if (strcmp(argv[1], "read") == 0) { @@ -184,8 +181,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) n, (n == cnt) ? "OK" : "ERROR"); return (n == cnt) ? 0 : 1; } else { - cmd_usage(cmdtp); - rc = 1; + return cmd_usage(cmdtp); } return rc; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 5b2df28..6b937f9 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -229,8 +229,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_device = argv[2]; break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!boot_device) { @@ -346,7 +345,8 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { switch (argc) { case 0: - case 1: cmd_usage(cmdtp); return 1; + case 1: return cmd_usage(cmdtp); + case 2: if (strncmp(argv[1],"res",3) == 0) { printf("\nReset SCSI\n"); @@ -392,8 +392,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\nno SCSI devices available\n"); return 1; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1],"dev",3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); @@ -421,8 +420,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 1; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: /* at least 4 args */ if (strcmp(argv[1],"read") == 0) { @@ -437,8 +435,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } } /* switch */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /**************************************************************************************** diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index b3e489f..1ff1232 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -57,10 +57,8 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int w; /* Validate arguments */ - if ((argc != 5) || (strlen(argv[3]) != 1)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc != 5) || (strlen(argv[3]) != 1)) + return cmd_usage(cmdtp); w = cmd_get_data_size(argv[0], 4); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 4826e9f..6e7be81 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -177,8 +177,7 @@ static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ return do_spi_flash_erase(argc - 1, argv + 1); usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_strings.c b/common/cmd_strings.c index bbbb6b4..144a6c1 100644 --- a/common/cmd_strings.c +++ b/common/cmd_strings.c @@ -14,10 +14,8 @@ static char *start_addr, *last_addr; int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc == 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc == 1) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { start_addr = (char *)simple_strtoul(argv[1], NULL, 16); diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 2faf8d8..77ca0a5 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -442,10 +442,8 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) ulong addr = 0; int err = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (mtdparts_init() != 0) { printf("Error initializing mtdparts!\n"); @@ -471,10 +469,8 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* todo: get dev number for NAND... */ ubi_dev.nr = 0; diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c index 9017041..2cab793 100644 --- a/common/cmd_ubifs.c +++ b/common/cmd_ubifs.c @@ -47,10 +47,9 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *vol_name; int ret; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); + vol_name = argv[1]; debug("Using volume %s\n", vol_name); @@ -102,25 +101,19 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return -1; } - if (argc < 3) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], &endp, 16); - if (endp == argv[1]) { - cmd_usage(cmdtp); - return 1; - } + if (endp == argv[1]) + return cmd_usage(cmdtp); filename = argv[2]; if (argc == 4) { size = simple_strtoul(argv[3], &endp, 16); - if (endp == argv[3]) { - cmd_usage(cmdtp); - return 1; - } + if (endp == argv[3]) + return cmd_usage(cmdtp); } debug("Loading file '%s' to address 0x%08x (size %d)\n", filename, addr, size); diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 73d74ac..dc63f24 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -376,8 +376,7 @@ int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_device = argv[2]; break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!boot_device) { @@ -516,10 +515,8 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *stor_dev; #endif - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((strncmp(argv[1], "reset", 5) == 0) || (strncmp(argv[1], "start", 5) == 0)) { @@ -699,8 +696,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } #endif /* CONFIG_USB_STORAGE */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } #ifdef CONFIG_USB_STORAGE diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c index 1429d31..18c14d1 100644 --- a/common/cmd_vfd.c +++ b/common/cmd_vfd.c @@ -49,10 +49,8 @@ int do_vfd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong bitmap; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); if (argv[1][0] == '/') { /* select bitmap by number */ bitmap = simple_strtoul(argv[1]+1, NULL, 10); diff --git a/common/command.c b/common/command.c index a1fc592..30a9801 100644 --- a/common/command.c +++ b/common/command.c @@ -153,7 +153,7 @@ int cmd_usage(cmd_tbl_t *cmdtp) puts (cmdtp->help); putc ('\n'); #endif /* CONFIG_SYS_LONGHELP */ - return 0; + return 1; } #ifdef CONFIG_AUTO_COMPLETE diff --git a/common/env_common.c b/common/env_common.c index 82e4936..460309b 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -227,7 +227,7 @@ void env_relocate (void) #endif if (gd->env_valid == 0) { -#if defined(CONFIG_GTH) || defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */ +#if defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */ puts ("Using default environment\n\n"); #else puts ("*** Warning - bad CRC, using default environment\n\n"); diff --git a/common/env_nand.c b/common/env_nand.c index 50bc111..a5e1038 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -38,6 +38,7 @@ #include <linux/stddef.h> #include <malloc.h> #include <nand.h> +#include <asm/errno.h> #if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) #define CMD_SAVEENV @@ -284,6 +285,38 @@ int readenv (size_t offset, u_char * buf) return 0; } +#ifdef CONFIG_ENV_OFFSET_OOB +int get_nand_env_oob(nand_info_t *nand, unsigned long *result) +{ + struct mtd_oob_ops ops; + uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)]; + int ret; + + ops.datbuf = NULL; + ops.mode = MTD_OOB_AUTO; + ops.ooboffs = 0; + ops.ooblen = ENV_OFFSET_SIZE; + ops.oobbuf = (void *) oob_buf; + + ret = nand->read_oob(nand, ENV_OFFSET_SIZE, &ops); + if (ret) { + printf("error reading OOB block 0\n"); + return ret; + } + + if (oob_buf[0] == ENV_OOB_MARKER) { + *result = oob_buf[1] * nand->erasesize; + } else if (oob_buf[0] == ENV_OOB_MARKER_OLD) { + *result = oob_buf[1]; + } else { + printf("No dynamic environment marker in OOB block 0\n"); + return -ENOENT; + } + + return 0; +} +#endif + #ifdef CONFIG_ENV_OFFSET_REDUND void env_relocate_spec (void) { @@ -353,6 +386,17 @@ void env_relocate_spec (void) #if !defined(ENV_IS_EMBEDDED) int ret; +#if defined(CONFIG_ENV_OFFSET_OOB) + ret = get_nand_env_oob(&nand_info[0], &nand_env_oob_offset); + /* If unable to read environment offset from NAND OOB then fall through + * to the normal environment reading code below + */ + if (!ret) + printf("Found Environment offset in OOB..\n"); + else + return use_default(); +#endif + ret = readenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr); if (ret) return use_default(); diff --git a/common/fdt_support.c b/common/fdt_support.c index a8ac617..718b635 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -2,6 +2,8 @@ * (C) Copyright 2007 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com * + * Copyright 2010 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -474,135 +476,6 @@ void fdt_fixup_ethernet(void *fdt) } } -#ifdef CONFIG_HAS_FSL_DR_USB -void fdt_fixup_dr_usb(void *blob, bd_t *bd) -{ - char *mode; - char *type; - const char *compat = "fsl-usb2-dr"; - const char *prop_mode = "dr_mode"; - const char *prop_type = "phy_type"; - int node_offset; - int err; - - mode = getenv("usb_dr_mode"); - type = getenv("usb_phy_type"); - if (!mode && !type) - return; - - node_offset = fdt_node_offset_by_compatible(blob, 0, compat); - if (node_offset < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - compat, fdt_strerror(node_offset)); - return; - } - - if (mode) { - err = fdt_setprop(blob, node_offset, prop_mode, mode, - strlen(mode) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_mode, compat, fdt_strerror(err)); - } - - if (type) { - err = fdt_setprop(blob, node_offset, prop_type, type, - strlen(type) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_type, compat, fdt_strerror(err)); - } -} -#endif /* CONFIG_HAS_FSL_DR_USB */ - -#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) -/* - * update crypto node properties to a specified revision of the SEC - * called with sec_rev == 0 if not on an mpc8xxxE processor - */ -void fdt_fixup_crypto_node(void *blob, int sec_rev) -{ - const struct sec_rev_prop { - u32 sec_rev; - u32 num_channels; - u32 channel_fifo_len; - u32 exec_units_mask; - u32 descriptor_types_mask; - } sec_rev_prop_list [] = { - { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ - { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ - { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ - { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ - { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ - { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ - { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ - }; - char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * - sizeof("fsl,secX.Y")]; - int crypto_node, sec_idx, err; - char *p; - u32 val; - - /* locate crypto node based on lowest common compatible */ - crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); - if (crypto_node == -FDT_ERR_NOTFOUND) - return; - - /* delete it if not on an E-processor */ - if (crypto_node > 0 && !sec_rev) { - fdt_del_node(blob, crypto_node); - return; - } - - /* else we got called for possible uprev */ - for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) - if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) - break; - - if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { - puts("warning: unknown SEC revision number\n"); - return; - } - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); - err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); - err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); - err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); - err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = 0; - while (sec_idx >= 0) { - p = compat_strlist + val; - val += sprintf(p, "fsl,sec%d.%d", - (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, - sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; - sec_idx--; - } - err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); -} -#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */ - /* Resize the fdt to its actual size + a bit of padding */ int fdt_resize(void *blob) { @@ -990,3 +863,292 @@ void fdt_del_node_and_alias(void *blob, const char *alias) off = fdt_path_offset(blob, "/aliases"); fdt_delprop(blob, off, alias); } + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const __be32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | be32_to_cpu(*(cell++)); + return r; +} + +static int of_n_cells(const void *blob, int nodeoffset, const char *name) +{ + int np; + const int *ip; + + do { + np = fdt_parent_offset(blob, nodeoffset); + + if (np >= 0) + nodeoffset = np; + ip = (int *)fdt_getprop(blob, nodeoffset, name, NULL); + if (ip) + return be32_to_cpup(ip); + } while (np >= 0); + + /* No #<NAME>-cells property for the root node */ + return 1; +} + +int of_n_addr_cells(const void *blob, int nodeoffset) +{ + return of_n_cells(blob, nodeoffset, "#address-cells"); +} + +int of_n_size_cells(const void *blob, int nodeoffset) +{ + return of_n_cells(blob, nodeoffset, "#size-cells"); +} + +#define PRu64 "%llx" + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_BAD_ADDR ((u64)-1) +#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ + (ns) > 0) + +/* Debug utility */ +#ifdef DEBUG +static void of_dump_addr(const char *s, const u32 *addr, int na) +{ + printf("%s", s); + while(na--) + printf(" %08x", *(addr++)); + printf("\n"); +} +#else +static void of_dump_addr(const char *s, const u32 *addr, int na) { } +#endif + +/* Callbacks for bus specific translators */ +struct of_bus { + const char *name; + const char *addresses; + void (*count_cells)(void *blob, int offset, + int *addrc, int *sizec); + u64 (*map)(u32 *addr, const u32 *range, + int na, int ns, int pna); + int (*translate)(u32 *addr, u64 offset, int na); +}; + +/* Default translator (generic bus) */ +static void of_bus_default_count_cells(void *blob, int offset, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = of_n_addr_cells(blob, offset); + if (sizec) + *sizec = of_n_size_cells(blob, offset); +} + +static u64 of_bus_default_map(u32 *addr, const u32 *range, + int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); + + debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", + cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_default_translate(u32 *addr, u64 offset, int na) +{ + u64 a = of_read_number(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = a >> 32; + addr[na - 1] = a & 0xffffffffu; + + return 0; +} + +/* Array of bus specific translators */ +static struct of_bus of_busses[] = { + /* Default */ + { + .name = "default", + .addresses = "reg", + .count_cells = of_bus_default_count_cells, + .map = of_bus_default_map, + .translate = of_bus_default_translate, + }, +}; + +static int of_translate_one(void * blob, int parent, struct of_bus *bus, + struct of_bus *pbus, u32 *addr, + int na, int ns, int pna, const char *rprop) +{ + const u32 *ranges; + int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + /* Normally, an absence of a "ranges" property means we are + * crossing a non-translatable boundary, and thus the addresses + * below the current not cannot be converted to CPU physical ones. + * Unfortunately, while this is very clear in the spec, it's not + * what Apple understood, and they do have things like /uni-n or + * /ht nodes with no "ranges" property and a lot of perfectly + * useable mapped devices below them. Thus we treat the absence of + * "ranges" as equivalent to an empty "ranges" property which means + * a 1:1 translation at that level. It's up to the caller not to try + * to translate addresses that aren't supposed to be translated in + * the first place. --BenH. + */ + ranges = (u32 *)fdt_getprop(blob, parent, rprop, &rlen); + if (ranges == NULL || rlen == 0) { + offset = of_read_number(addr, na); + memset(addr, 0, pna * 4); + debug("OF: no ranges, 1:1 translation\n"); + goto finish; + } + + debug("OF: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + debug("OF: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("OF: parent translation for:", addr, pna); + debug("OF: with offset: "PRu64"\n", offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +u64 __of_translate_address(void *blob, int node_offset, const u32 *in_addr, + const char *rprop) +{ + int parent; + struct of_bus *bus, *pbus; + u32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + debug("OF: ** translation for device %s **\n", + fdt_get_name(blob, node_offset, NULL)); + + /* Get parent & match bus type */ + parent = fdt_parent_offset(blob, node_offset); + if (parent < 0) + goto bail; + bus = &of_busses[0]; + + /* Cound address cells & copy address locally */ + bus->count_cells(blob, node_offset, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + printf("%s: Bad cell count for %s\n", __FUNCTION__, + fdt_get_name(blob, node_offset, NULL)); + goto bail; + } + memcpy(addr, in_addr, na * 4); + + debug("OF: bus is %s (na=%d, ns=%d) on %s\n", + bus->name, na, ns, fdt_get_name(blob, parent, NULL)); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + node_offset = parent; + parent = fdt_parent_offset(blob, node_offset); + + /* If root, we have finished */ + if (parent < 0) { + debug("OF: reached root node\n"); + result = of_read_number(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = &of_busses[0]; + pbus->count_cells(blob, node_offset, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + printf("%s: Bad cell count for %s\n", __FUNCTION__, + fdt_get_name(blob, node_offset, NULL)); + break; + } + + debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pbus->name, pna, pns, fdt_get_name(blob, parent, NULL)); + + /* Apply bus translation */ + if (of_translate_one(blob, node_offset, bus, pbus, + addr, na, ns, pna, rprop)) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("OF: one level translation:", addr, na); + } + bail: + + return result; +} + +u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr) +{ + return __of_translate_address(blob, node_offset, in_addr, "ranges"); +} + +/** + * fdt_node_offset_by_compat_reg: Find a node that matches compatiable and + * who's reg property matches a physical cpu address + * + * @blob: ptr to device tree + * @compat: compatiable string to match + * @compat_off: property name + * + */ +int fdt_node_offset_by_compat_reg(void *blob, const char *compat, + phys_addr_t compat_off) +{ + int len, off = fdt_node_offset_by_compatible(blob, -1, compat); + while (off != -FDT_ERR_NOTFOUND) { + u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); + if (reg) { + if (compat_off == fdt_translate_address(blob, off, reg)) + return off; + } + off = fdt_node_offset_by_compatible(blob, off, compat); + } + + return -FDT_ERR_NOTFOUND; +} + + diff --git a/common/hush.c b/common/hush.c index 8a74d22..4dd9513 100644 --- a/common/hush.c +++ b/common/hush.c @@ -1694,10 +1694,8 @@ static int run_pipe_real(struct pipe *pi) } #endif /* found - check max args */ - if ((child->argc - i) > cmdtp->maxargs) { - cmd_usage(cmdtp); - return -1; - } + if ((child->argc - i) > cmdtp->maxargs) + return cmd_usage(cmdtp); #endif child->argv+=i; /* XXX horrible hack */ #ifndef __U_BOOT__ diff --git a/common/lcd.c b/common/lcd.c index 93ddedf..d854c21 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -41,7 +41,7 @@ #include <lcd.h> #include <watchdog.h> -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS #include <asm/byteorder.h> #endif @@ -503,7 +503,7 @@ void bitmap_plot (int x, int y) uchar *bmap; uchar *fb; ushort *fb16; -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS struct pxafb_info *fbi = &panel_info.pxa; #elif defined(CONFIG_MPC823) volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; @@ -519,7 +519,7 @@ void bitmap_plot (int x, int y) if (NBITS(panel_info.vl_bpix) < 12) { /* Leave room for default color map */ -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]); @@ -615,7 +615,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) unsigned long pwidth = panel_info.vl_col; unsigned colors, bpix, bmp_bpix; unsigned long compression; -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS struct pxafb_info *fbi = &panel_info.pxa; #elif defined(CONFIG_MPC823) volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; @@ -656,7 +656,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) #if !defined(CONFIG_MCC200) /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */ if (bmp_bpix == 8) { -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); @@ -745,7 +745,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) WATCHDOG_RESET(); for (j = 0; j < width; j++) { if (bpix != 16) { -#if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS || defined(CONFIG_ATMEL_LCD) *(fb++) = *(bmap++); #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) *(fb++) = 255 - *(bmap++); diff --git a/common/main.c b/common/main.c index 20090ee..54ef79e 100644 --- a/common/main.c +++ b/common/main.c @@ -1418,10 +1418,8 @@ int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int i; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); for (i=1; i<argc; ++i) { char *arg; diff --git a/common/usb_storage.c b/common/usb_storage.c index 4fc01a2..76949b8 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -181,7 +181,7 @@ block_dev_desc_t *usb_stor_get_dev(int index) void usb_show_progress(void) { - printf("."); + debug("."); } /******************************************************************************* @@ -224,10 +224,11 @@ int usb_stor_scan(int mode) for (i = 0; i < USB_MAX_STOR_DEV; i++) { memset(&usb_dev_desc[i], 0, sizeof(block_dev_desc_t)); - usb_dev_desc[i].target = 0xff; usb_dev_desc[i].if_type = IF_TYPE_USB; usb_dev_desc[i].dev = i; usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN; + usb_dev_desc[i].target = 0xff; + usb_dev_desc[i].type = DEV_TYPE_UNKNOWN; usb_dev_desc[i].block_read = usb_stor_read; usb_dev_desc[i].block_write = usb_stor_write; } @@ -1080,7 +1081,7 @@ retry_it: usb_disable_asynch(0); /* asynch transfer allowed */ if (blkcnt >= USB_MAX_READ_BLK) - printf("\n"); + debug("\n"); return blkcnt; } @@ -1160,7 +1161,7 @@ retry_it: usb_disable_asynch(0); /* asynch transfer allowed */ if (blkcnt >= USB_MAX_WRITE_BLK) - printf("\n"); + debug("\n"); return blkcnt; } diff --git a/disk/part_dos.c b/disk/part_dos.c index 887b75e..2de1bb8 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -77,8 +77,10 @@ static int test_block_type(unsigned char *buffer) (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) { return (-1); } /* no DOS Signature at all */ - if(strncmp((char *)&buffer[DOS_PBR_FSTYPE_OFFSET],"FAT",3)==0) + if (strncmp((char *)&buffer[DOS_PBR_FSTYPE_OFFSET],"FAT",3)==0 || + strncmp((char *)&buffer[DOS_PBR32_FSTYPE_OFFSET],"FAT32",5)==0) { return DOS_PBR; /* is PBR */ + } return DOS_MBR; /* Is MBR */ } diff --git a/disk/part_dos.h b/disk/part_dos.h index ac93f20..195a32c 100644 --- a/disk/part_dos.h +++ b/disk/part_dos.h @@ -28,13 +28,14 @@ #ifdef CONFIG_ISO_PARTITION /* Make the buffers bigger if ISO partition support is enabled -- CD-ROMS have 2048 byte blocks */ -#define DEFAULT_SECTOR_SIZE 2048 +#define DEFAULT_SECTOR_SIZE 2048 #else #define DEFAULT_SECTOR_SIZE 512 #endif #define DOS_PART_TBL_OFFSET 0x1be #define DOS_PART_MAGIC_OFFSET 0x1fe #define DOS_PBR_FSTYPE_OFFSET 0x36 +#define DOS_PBR32_FSTYPE_OFFSET 0x52 #define DOS_PBR_MEDIA_TYPE_OFFSET 0x15 #define DOS_MBR 0 #define DOS_PBR 1 diff --git a/doc/README.designware_eth b/doc/README.designware_eth new file mode 100644 index 0000000..25ec6bd --- /dev/null +++ b/doc/README.designware_eth @@ -0,0 +1,25 @@ +This driver supports Designware Ethernet Controller provided by Synopsis. + +The driver is enabled by CONFIG_DESIGNWARE_ETH. + +The driver has been developed and tested on SPEAr platforms. By default, the +MDIO interface works at 100/Full. #defining the below options in board +configuration file changes this behavior. + +Call an subroutine from respective board/.../board.c +designware_initialize(u32 id, ulong base_addr, u32 phy_addr); + +The various options suported by the driver are +1. CONFIG_DW_ALTDESCRIPTOR + Define this to use the Alternate/Enhanced Descriptor configurations. +1. CONFIG_DW_AUTONEG + Define this to autonegotiate with the host before proceeding with mac + level configuration. This obviates the definitions of CONFIG_DW_SPEED10M + and CONFIG_DW_DUPLEXHALF. +2. CONFIG_DW_SPEED10M + Define this to change the default behavior from 100Mbps to 10Mbps. +3. CONFIG_DW_DUPLEXHALF + Define this to change the default behavior from Full Duplex to Half. +4. CONFIG_DW_SEARCH_PHY + Define this to search the phy address. This would overwrite the value + passed as 3rd arg from designware_initialize routine. diff --git a/drivers/block/pata_bfin.c b/drivers/block/pata_bfin.c index f16dabe..847c032 100644 --- a/drivers/block/pata_bfin.c +++ b/drivers/block/pata_bfin.c @@ -14,6 +14,7 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/errno.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/pata.h> #include <ata.h> #include <libata.h> @@ -769,19 +770,17 @@ static int bfin_ata_reset_port(struct ata_port *ap) */ static int bfin_config_atapi_gpio(struct ata_port *ap) { - bfin_write_PORTH_FER(bfin_read_PORTH_FER() | 0x4); - bfin_write_PORTH_MUX(bfin_read_PORTH_MUX() & ~0x30); - bfin_write_PORTH_DIR_SET(0x4); - - bfin_write_PORTJ_FER(0x7f8); - bfin_write_PORTJ_MUX(bfin_read_PORTI_MUX() & ~0x3fffc0); - bfin_write_PORTJ_DIR_SET(0x5f8); - bfin_write_PORTJ_DIR_CLEAR(0x200); - bfin_write_PORTJ_INEN(0x200); - - bfin_write_PINT2_ASSIGN(0x0707); - bfin_write_PINT2_MASK_SET(0x200); - SSYNC(); + const unsigned short pins[] = { + P_ATAPI_RESET, P_ATAPI_DIOR, P_ATAPI_DIOW, P_ATAPI_CS0, + P_ATAPI_CS1, P_ATAPI_DMACK, P_ATAPI_DMARQ, P_ATAPI_INTRQ, + P_ATAPI_IORDY, P_ATAPI_D0A, P_ATAPI_D1A, P_ATAPI_D2A, + P_ATAPI_D3A, P_ATAPI_D4A, P_ATAPI_D5A, P_ATAPI_D6A, + P_ATAPI_D7A, P_ATAPI_D8A, P_ATAPI_D9A, P_ATAPI_D10A, + P_ATAPI_D11A, P_ATAPI_D12A, P_ATAPI_D13A, P_ATAPI_D14A, + P_ATAPI_D15A, P_ATAPI_A0A, P_ATAPI_A1A, P_ATAPI_A2A, 0, + }; + + peripheral_request_list(pins, "pata_bfin"); return 0; } diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index d1065f4..6e82bd6 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -164,8 +164,7 @@ int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (!c || !((argc == (c->maxargs)) || (((int)c->cmd == PCA953X_CMD_DEVICE) && (argc == (c->maxargs - 1))))) { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* arg2 used as chip number or pin number */ diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index ff18991..3256133 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -25,6 +25,8 @@ #include <asm/arch/i2c.h> #include <asm/io.h> +#include "omap24xx_i2c.h" + static void wait_for_bb (void); static u16 wait_for_pin (void); static void flush_fifo(void); @@ -176,7 +178,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) status = wait_for_pin (); if (status & I2C_STAT_RRDY) { -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) *value = readb (&i2c_base->data); #else *value = readw (&i2c_base->data); @@ -221,7 +224,8 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) status = wait_for_pin (); if (status & I2C_STAT_XRDY) { -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) /* send out 1 byte */ writeb (regoffset, &i2c_base->data); writew (I2C_STAT_XRDY, &i2c_base->stat); @@ -274,7 +278,8 @@ static void flush_fifo(void) while(1){ stat = readw(&i2c_base->stat); if(stat == I2C_STAT_RRDY){ -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) readb(&i2c_base->data); #else readw(&i2c_base->data); @@ -435,3 +440,9 @@ int i2c_set_bus_num(unsigned int bus) return 0; } + +int i2c_get_bus_num(void) +{ + return (int) current_bus; +} + diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h new file mode 100644 index 0000000..92a3416 --- /dev/null +++ b/drivers/i2c/omap24xx_i2c.h @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2004-2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP24XX_I2C_H_ +#define _OMAP24XX_I2C_H_ + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ + /* (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#define I2C_SCLL_SCLL 0 +#define I2C_SCLL_SCLL_M 0xFF +#define I2C_SCLL_HSSCLL 8 +#define I2C_SCLH_HSSCLL_M 0xFF +#define I2C_SCLH_SCLH 0 +#define I2C_SCLH_SCLH_M 0xFF +#define I2C_SCLH_HSSCLH 8 +#define I2C_SCLH_HSSCLH_M 0xFF + +#define OMAP_I2C_STANDARD 100000 +#define OMAP_I2C_FAST_MODE 400000 +#define OMAP_I2C_HIGH_SPEED 3400000 + +#define SYSTEM_CLOCK_12 12000000 +#define SYSTEM_CLOCK_13 13000000 +#define SYSTEM_CLOCK_192 19200000 +#define SYSTEM_CLOCK_96 96000000 + +/* Use the reference value of 96MHz if not explicitly set by the board */ +#ifndef I2C_IP_CLK +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#endif + +/* + * The reference minimum clock for high speed is 19.2MHz. + * The linux 2.6.30 kernel uses this value. + * The reference minimum clock for fast mode is 9.6MHz + * The reference minimum clock for standard mode is 4MHz + * In TRM, the value of 12MHz is used. + */ +#ifndef I2C_INTERNAL_SAMPLING_CLK +#define I2C_INTERNAL_SAMPLING_CLK 19200000 +#endif + +/* + * The equation for the low and high time is + * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed + * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed + * + * If the duty cycle is 50% + * + * tlow = scll + scll_trim = sampling clock / (2 * speed) + * thigh = sclh + sclh_trim = sampling clock / (2 * speed) + * + * In TRM + * scll_trim = 7 + * sclh_trim = 5 + * + * The linux 2.6.30 kernel uses + * scll_trim = 6 + * sclh_trim = 6 + * + * These are the trim values for standard and fast speed + */ +#ifndef I2C_FASTSPEED_SCLL_TRIM +#define I2C_FASTSPEED_SCLL_TRIM 6 +#endif +#ifndef I2C_FASTSPEED_SCLH_TRIM +#define I2C_FASTSPEED_SCLH_TRIM 6 +#endif + +/* These are the trim values for high speed */ +#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM +#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM +#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM +#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM +#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM +#endif + +#define I2C_PSC_MAX 0x0f +#define I2C_PSC_MIN 0x00 + +#endif /* _OMAP24XX_I2C_H_ */ diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index e0cf1e1..1a1809a 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -51,6 +51,58 @@ #endif #include <i2c.h> +#if defined(CONFIG_SOFT_I2C_GPIO_SCL) +# include <asm/gpio.h> + +# ifndef I2C_GPIO_SYNC +# define I2C_GPIO_SYNC +# endif + +# ifndef I2C_INIT +# define I2C_INIT \ + do { \ + gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, "soft_i2c"); \ + gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, "soft_i2c"); \ + } while (0) +# endif + +# ifndef I2C_ACTIVE +# define I2C_ACTIVE do { } while (0) +# endif + +# ifndef I2C_TRISTATE +# define I2C_TRISTATE do { } while (0) +# endif + +# ifndef I2C_READ +# define I2C_READ gpio_get_value(CONFIG_SOFT_I2C_GPIO_SDA) +# endif + +# ifndef I2C_SDA +# define I2C_SDA(bit) \ + do { \ + if (bit) \ + gpio_direction_input(CONFIG_SOFT_I2C_GPIO_SDA); \ + else \ + gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SDA, 0); \ + I2C_GPIO_SYNC; \ + } while (0) +# endif + +# ifndef I2C_SCL +# define I2C_SCL(bit) \ + do { \ + gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SCL, bit); \ + I2C_GPIO_SYNC; \ + } while (0) +# endif + +# ifndef I2C_DELAY +# define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ +# endif + +#endif + /* #define DEBUG_I2C */ #ifdef DEBUG_I2C diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index 5b33c1f..aa893c3 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -294,8 +294,7 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (!c || !((argc == (c->maxargs)) || (((int)c->cmd == DS4510_CMD_DEVICE) && (argc == (c->maxargs - 1))))) { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* arg2 used as chip addr and pin number */ @@ -366,14 +365,12 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_CMD_DS4510_MEM /* Only eeprom, seeprom, and sram commands should make it here */ - if (strcmp(argv[2], "read") == 0) { + if (strcmp(argv[2], "read") == 0) rw_func = ds4510_mem_read; - } else if (strcmp(argv[2], "write") == 0) { + else if (strcmp(argv[2], "write") == 0) rw_func = ds4510_mem_write; - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); addr = simple_strtoul(argv[3], NULL, 16); off += simple_strtoul(argv[4], NULL, 16); diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 8255175..6589076 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -43,93 +43,69 @@ DECLARE_GLOBAL_DATA_PTR; defined(CONFIG_P1013) || defined(CONFIG_P1022) || \ defined(CONFIG_P2010) || defined(CONFIG_P2020) #define FSL_HW_NUM_LAWS 12 -#elif defined(CONFIG_PPC_P4080) +#elif defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P4080) || \ + defined(CONFIG_PPC_P5020) #define FSL_HW_NUM_LAWS 32 #else #error FSL_HW_NUM_LAWS not defined for this platform #endif #ifdef CONFIG_FSL_CORENET -void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) -{ - volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); - - gd->used_laws |= (1 << idx); +#define LAW_BASE (CONFIG_SYS_FSL_CORENET_CCM_ADDR) +#define LAWAR_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawar) +#define LAWBARH_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarh) +#define LAWBARL_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarl) +#define LAWBAR_SHIFT 0 +#else +#define LAW_BASE (CONFIG_SYS_IMMR + 0xc08) +#define LAWAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x + 2) +#define LAWBAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x) +#define LAWBAR_SHIFT 12 +#endif - out_be32(&ccm->law[idx].lawar, 0); - out_be32(&ccm->law[idx].lawbarh, ((u64)addr >> 32)); - out_be32(&ccm->law[idx].lawbarl, addr & 0xffffffff); - out_be32(&ccm->law[idx].lawar, LAW_EN | ((u32)id << 20) | (u32)sz); - /* Read back so that we sync the writes */ - in_be32(&ccm->law[idx].lawar); -} - -void disable_law(u8 idx) +static inline phys_addr_t get_law_base_addr(int idx) { - volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); - - gd->used_laws &= ~(1 << idx); - - out_be32(&ccm->law[idx].lawar, 0); - out_be32(&ccm->law[idx].lawbarh, 0); - out_be32(&ccm->law[idx].lawbarl, 0); - - /* Read back so that we sync the writes */ - in_be32(&ccm->law[idx].lawar); - - return; +#ifdef CONFIG_FSL_CORENET + return (phys_addr_t) + ((u64)in_be32(LAWBARH_ADDR(idx)) << 32) | + in_be32(LAWBARL_ADDR(idx)); +#else + return (phys_addr_t)in_be32(LAWBAR_ADDR(idx)) << LAWBAR_SHIFT; +#endif } -#ifndef CONFIG_NAND_SPL -static int get_law_entry(u8 i, struct law_entry *e) +static inline void set_law_base_addr(int idx, phys_addr_t addr) { - volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); - u32 lawar; - - lawar = in_be32(&ccm->law[i].lawar); - - if (!(lawar & LAW_EN)) - return 0; - - e->addr = ((u64)in_be32(&ccm->law[i].lawbarh) << 32) | - in_be32(&ccm->law[i].lawbarl); - e->size = lawar & 0x3f; - e->trgt_id = (lawar >> 20) & 0xff; - - return 1; -} -#endif +#ifdef CONFIG_FSL_CORENET + out_be32(LAWBARL_ADDR(idx), addr & 0xffffffff); + out_be32(LAWBARH_ADDR(idx), (u64)addr >> 32); #else + out_be32(LAWBAR_ADDR(idx), addr >> LAWBAR_SHIFT); +#endif +} + void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * idx; - volatile u32 *lawar = base + 8 * idx + 2; - gd->used_laws |= (1 << idx); - out_be32(lawar, 0); - out_be32(lawbar, addr >> 12); - out_be32(lawar, LAW_EN | ((u32)id << 20) | (u32)sz); + out_be32(LAWAR_ADDR(idx), 0); + set_law_base_addr(idx, addr); + out_be32(LAWAR_ADDR(idx), LAW_EN | ((u32)id << 20) | (u32)sz); /* Read back so that we sync the writes */ - in_be32(lawar); + in_be32(LAWAR_ADDR(idx)); } void disable_law(u8 idx) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * idx; - volatile u32 *lawar = base + 8 * idx + 2; - gd->used_laws &= ~(1 << idx); - out_be32(lawar, 0); - out_be32(lawbar, 0); + out_be32(LAWAR_ADDR(idx), 0); + set_law_base_addr(idx, 0); /* Read back so that we sync the writes */ - in_be32(lawar); + in_be32(LAWAR_ADDR(idx)); return; } @@ -137,24 +113,20 @@ void disable_law(u8 idx) #ifndef CONFIG_NAND_SPL static int get_law_entry(u8 i, struct law_entry *e) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * i; - volatile u32 *lawar = base + 8 * i + 2; - u32 temp; + u32 lawar; - temp = in_be32(lawar); + lawar = in_be32(LAWAR_ADDR(i)); - if (!(temp & LAW_EN)) + if (!(lawar & LAW_EN)) return 0; - e->addr = (u64)in_be32(lawbar) << 12; - e->size = temp & 0x3f; - e->trgt_id = (temp >> 20) & 0xff; + e->addr = get_law_base_addr(i); + e->size = lawar & 0x3f; + e->trgt_id = (lawar >> 20) & 0xff; return 1; } #endif -#endif int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { @@ -216,17 +188,23 @@ struct law_entry find_law(phys_addr_t addr) void print_laws(void) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base; - volatile u32 *lawar = base + 2; int i; + u32 lawar; printf("\nLocal Access Window Configuration\n"); - for(i = 0; i < FSL_HW_NUM_LAWS; i++) { - printf("\tLAWBAR%d : 0x%08x, LAWAR%d : 0x%08x\n", - i, in_be32(lawbar), i, in_be32(lawar)); - lawbar += 8; - lawar += 8; + for (i = 0; i < FSL_HW_NUM_LAWS; i++) { + lawar = in_be32(LAWAR_ADDR(i)); +#ifdef CONFIG_FSL_CORENET + printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x", + i, in_be32(LAWBARH_ADDR(i)), + i, in_be32(LAWBARL_ADDR(i))); +#else + printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i))); +#endif + printf(" LAWAR0x%02d: 0x%08x\n", i, lawar); + printf("\t(EN: %d TGT: 0x%02x SIZE: ", + (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff); + print_size(lawar_size(lawar), ")\n"); } return; diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c index 274327f..dca0a1d 100644 --- a/drivers/misc/fsl_pmic.c +++ b/drivers/misc/fsl_pmic.c @@ -163,26 +163,22 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) u32 val; /* at least two arguments please */ - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); cmd = argv[1]; if (strcmp(cmd, "dump") == 0) { - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); + nregs = simple_strtoul(argv[2], NULL, 16); pmic_dump(nregs); return 0; } if (strcmp(cmd, "write") == 0) { - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); + nregs = simple_strtoul(argv[2], NULL, 16); val = simple_strtoul(argv[3], NULL, 16); pmic_reg_write(nregs, val); diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c index acd6a90..3fedddc 100644 --- a/drivers/misc/gpio_led.c +++ b/drivers/misc/gpio_led.c @@ -2,26 +2,22 @@ * Status LED driver based on GPIO access conventions of Linux * * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Licensed under the GPL-2 or later. */ #include <common.h> #include <status_led.h> #include <asm/gpio.h> -/* assume led is active low */ - void __led_init(led_id_t mask, int state) { - gpio_direction_output(mask, (state == STATUS_LED_ON) ? 0 : 1); + gpio_request(mask, "gpio_led"); + gpio_direction_output(mask, state == STATUS_LED_ON); } void __led_set(led_id_t mask, int state) { - gpio_set_value(mask, (state == STATUS_LED_ON) ? 0 : 1); + gpio_set_value(mask, state == STATUS_LED_ON); } void __led_toggle(led_id_t mask) diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index f9d560a..4a77779 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -15,6 +15,7 @@ #include <asm/errno.h> #include <asm/byteorder.h> #include <asm/blackfin.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/sdh.h> #include <asm/mach-common/bits/dma.h> @@ -41,11 +42,15 @@ # define bfin_write_DMA_X_COUNT bfin_write_DMA4_X_COUNT # define bfin_write_DMA_X_MODIFY bfin_write_DMA4_X_MODIFY # define bfin_write_DMA_CONFIG bfin_write_DMA4_CONFIG +# define PORTMUX_PINS \ + { P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 } #elif defined(__ADSPBF54x__) # define bfin_write_DMA_START_ADDR bfin_write_DMA22_START_ADDR # define bfin_write_DMA_X_COUNT bfin_write_DMA22_X_COUNT # define bfin_write_DMA_X_MODIFY bfin_write_DMA22_X_MODIFY # define bfin_write_DMA_CONFIG bfin_write_DMA22_CONFIG +# define PORTMUX_PINS \ + { P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0 } #else # error no support for this proc yet #endif @@ -208,18 +213,13 @@ static void bfin_sdh_set_ios(struct mmc *mmc) static int bfin_sdh_init(struct mmc *mmc) { - + const unsigned short pins[] = PORTMUX_PINS; u16 pwr_ctl = 0; -/* Initialize sdh controller */ + + /* Initialize sdh controller */ + peripheral_request_list(pins, "bfin_sdh"); #if defined(__ADSPBF54x__) bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); - bfin_write_PORTC_FER(bfin_read_PORTC_FER() | 0x3F00); - bfin_write_PORTC_MUX(bfin_read_PORTC_MUX() & ~0xFFF0000); -#elif defined(__ADSPBF51x__) - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | 0x01F8); - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~0x3FC) | 0x154); -#else -# error no portmux for this proc yet #endif bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); /* Disable card detect pin */ diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c index 96c0e65..9506cca 100644 --- a/drivers/mmc/omap3_mmc.c +++ b/drivers/mmc/omap3_mmc.c @@ -30,7 +30,8 @@ #include <i2c.h> #include <twl4030.h> #include <asm/io.h> -#include <asm/arch/mmc.h> + +#include "omap3_mmc.h" const unsigned short mmc_transspeed_val[15][4] = { {CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)}, @@ -52,7 +53,27 @@ const unsigned short mmc_transspeed_val[15][4] = { mmc_card_data cur_card_data; static block_dev_desc_t mmc_blk_dev; -static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE; +static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE; + +int mmc_set_dev(int dev_num) +{ + switch (dev_num) { + case 1: + mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE; + break; + case 2: + mmc_base = (hsmmc_t *)OMAP_HSMMC2_BASE; + break; + case 3: + mmc_base = (hsmmc_t *)OMAP_HSMMC3_BASE; + break; + default: + mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE; + return 1; + } + + return 0; +} block_dev_desc_t *mmc_get_dev(int dev) { @@ -61,12 +82,14 @@ block_dev_desc_t *mmc_get_dev(int dev) unsigned char mmc_board_init(void) { - t2_t *t2_base = (t2_t *)T2_BASE; - #if defined(CONFIG_TWL4030_POWER) twl4030_power_mmc_init(); #endif +#if defined(CONFIG_OMAP34XX) + t2_t *t2_base = (t2_t *)T2_BASE; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 | PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, &t2_base->pbias_lite); @@ -74,6 +97,20 @@ unsigned char mmc_board_init(void) writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL, &t2_base->devconf0); + writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL, + &t2_base->devconf1); + + writel(readl(&prcm_base->fclken1_core) | + EN_MMC1 | EN_MMC2 | EN_MMC3, + &prcm_base->fclken1_core); + + writel(readl(&prcm_base->iclken1_core) | + EN_MMC1 | EN_MMC2 | EN_MMC3, + &prcm_base->iclken1_core); +#endif + +/* TODO add appropriate OMAP4 init */ + return 1; } @@ -512,8 +549,11 @@ unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt, return 1; } -int mmc_legacy_init(int verbose) +int mmc_legacy_init(int dev) { + if (mmc_set_dev(dev) != 0) + return 1; + if (configure_mmc(&cur_card_data) != 1) return 1; diff --git a/arch/arm/include/asm/arch-omap3/mmc.h b/drivers/mmc/omap3_mmc.h index 196ffdc..cbb3dc3 100644 --- a/arch/arm/include/asm/arch-omap3/mmc.h +++ b/drivers/mmc/omap3_mmc.h @@ -25,7 +25,7 @@ #ifndef MMC_H #define MMC_H -#include "mmc_host_def.h" +#include <asm/arch/mmc_host_def.h> /* Responses */ #define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) diff --git a/drivers/mtd/nand/bfin_nand.c b/drivers/mtd/nand/bfin_nand.c index 6d3d450..3ee060f 100644 --- a/drivers/mtd/nand/bfin_nand.c +++ b/drivers/mtd/nand/bfin_nand.c @@ -26,6 +26,7 @@ #include <nand.h> #include <asm/blackfin.h> +#include <asm/portmux.h> /* Bit masks for NFC_CTL */ @@ -337,6 +338,12 @@ static struct nand_ecclayout bootrom_ecclayout = { */ int board_nand_init(struct nand_chip *chip) { + const unsigned short pins[] = { + P_NAND_CE, P_NAND_RB, P_NAND_D0, P_NAND_D1, P_NAND_D2, + P_NAND_D3, P_NAND_D4, P_NAND_D5, P_NAND_D6, P_NAND_D7, + P_NAND_WE, P_NAND_RE, P_NAND_CLE, P_NAND_ALE, 0, + }; + pr_stamp(); /* set width/ecc/timings/etc... */ @@ -347,14 +354,7 @@ int board_nand_init(struct nand_chip *chip) bfin_write_NFC_IRQSTAT(0xffff); /* enable GPIO function enable register */ -#ifdef __ADSPBF54x__ - bfin_write_PORTJ_FER(bfin_read_PORTJ_FER() | 6); -#elif defined(__ADSPBF52x__) - bfin_write_PORTH_FER(bfin_read_PORTH_FER() | 0xFCFF); - bfin_write_PORTH_MUX(0); -#else -# error no support for this variant -#endif + peripheral_request_list(pins, "bfin_nand"); chip->cmd_ctrl = bfin_nfc_cmd_ctrl; chip->read_buf = bfin_nfc_read_buf; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 146e9bf..acdb431 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,7 +75,7 @@ struct fsl_elbc_ctrl { struct fsl_elbc_mtd *chips[MAX_BANKS]; /* device info */ - fsl_lbus_t *regs; + fsl_lbc_t *regs; u8 __iomem *addr; /* Address of assigned FCM buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes; /* Number of bytes read during command */ @@ -171,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; int buf_num; ctrl->page = page_addr; @@ -211,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; long long end_tick; u32 ltesr; @@ -261,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; if (priv->page_size) { out_be32(&lbc->fir, @@ -295,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; ctrl->use_mdr = 0; @@ -633,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; if (ctrl->status != LTESR_CC) return NAND_STATUS_FAIL; @@ -697,11 +697,7 @@ static void fsl_elbc_ctrl_init(void) if (!elbc_ctrl) return; -#ifdef CONFIG_MPC85xx - elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; -#else - elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus; -#endif + elbc_ctrl->regs = LBC_BASE_ADDR; /* clear event registers */ out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7171bdd..ed1c9c9 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2652,8 +2652,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, } } - if (!type) + if (!type) { + printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x\n", __func__, + *maf_id, dev_id); return ERR_PTR(-ENODEV); + } if (!mtd->name) mtd->name = type->name; diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 077c305..25b22ec 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -83,6 +83,7 @@ struct nand_flash_dev nand_flash_ids[] = { /* 1 Gigabit */ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS}, {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS}, + {"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS}, {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16}, {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16}, diff --git a/drivers/mtd/nand/nand_plat.c b/drivers/mtd/nand/nand_plat.c index b35492b..37a0206 100644 --- a/drivers/mtd/nand/nand_plat.c +++ b/drivers/mtd/nand/nand_plat.c @@ -16,6 +16,10 @@ #include <common.h> #include <asm/io.h> +#ifdef NAND_PLAT_GPIO_DEV_READY +# include <asm/gpio.h> +# define NAND_PLAT_DEV_READY(chip) gpio_get_value(NAND_PLAT_GPIO_DEV_READY) +#endif #include <nand.h> @@ -43,7 +47,14 @@ static int plat_dev_ready(struct mtd_info *mtd) int board_nand_init(struct nand_chip *nand) { +#ifdef NAND_PLAT_GPIO_DEV_READY + gpio_request(NAND_PLAT_GPIO_DEV_READY, "nand-plat"); + gpio_direction_input(NAND_PLAT_GPIO_DEV_READY); +#endif + +#ifdef NAND_PLAT_INIT NAND_PLAT_INIT(); +#endif nand->cmd_ctrl = plat_cmd_ctrl; nand->dev_ready = plat_dev_ready; diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index 2fac641..144b851 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -1095,6 +1095,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) miiphy_write (dev->name, reg, 0x18, 0x4101); miiphy_write (dev->name, reg, 0x09, 0x0e00); miiphy_write (dev->name, reg, 0x04, 0x01e1); +#if defined(CONFIG_M88E1111_DISABLE_FIBER) + miiphy_read(dev->name, reg, 0x1b, ®_short); + reg_short |= 0x8000; + miiphy_write(dev->name, reg, 0x1b, reg_short); +#endif #endif #if defined(CONFIG_M88E1112_PHY) if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b75c02f..218eeff 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o COBJS-$(CONFIG_CS8900) += cs8900.o COBJS-$(CONFIG_TULIP) += dc2114x.o +COBJS-$(CONFIG_DESIGNWARE_ETH) += designware.o COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o COBJS-$(CONFIG_DNET) += dnet.o COBJS-$(CONFIG_E1000) += e1000.o @@ -46,13 +47,13 @@ COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o COBJS-$(CONFIG_FTMAC100) += ftmac100.o COBJS-$(CONFIG_GRETH) += greth.o COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o -COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o COBJS-$(CONFIG_LAN91C96) += lan91c96.o COBJS-$(CONFIG_MACB) += macb.o COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o +COBJS-$(CONFIG_MVGBE) += mvgbe.o COBJS-$(CONFIG_NATSEMI) += natsemi.o COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c index 2399569..245da12 100644 --- a/drivers/net/at91_emac.c +++ b/drivers/net/at91_emac.c @@ -53,6 +53,10 @@ Please decrease the CONFIG_SYS_RX_ETH_BUFFER value #endif +#ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR +#define CONFIG_DRIVER_AT91EMAC_PHYADDR 0 +#endif + /* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */ #if (AT91C_MASTER_CLOCK > 80000000) #define HCLK_DIV AT91_EMAC_CFG_MCLK_64 @@ -198,12 +202,15 @@ static int at91emac_phy_reset(struct eth_device *netdev) emac = (at91_emac_t *) netdev->iobase; adv = ADVERTISE_CSMA | ADVERTISE_ALL; - at91emac_write(emac, 0, MII_ADVERTISE, adv); + at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_ADVERTISE, adv); VERBOSEP("%s: Starting autonegotiation...\n", netdev->name); - at91emac_write(emac, 0, MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); + at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR, + (BMCR_ANENABLE | BMCR_ANRESTART)); for (i = 0; i < 100000 / 100; i++) { - at91emac_read(emac, 0, MII_BMSR, &status); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_BMSR, &status); if (status & BMSR_ANEGCOMPLETE) break; udelay(100); @@ -229,13 +236,15 @@ static int at91emac_phy_init(struct eth_device *netdev) emac = (at91_emac_t *) netdev->iobase; /* Check if the PHY is up to snuff... */ - at91emac_read(emac, 0, MII_PHYSID1, &phy_id); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_PHYSID1, &phy_id); if (phy_id == 0xffff) { printf("%s: No PHY present\n", netdev->name); return 1; } - at91emac_read(emac, 0, MII_BMSR, &status); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_BMSR, &status); if (!(status & BMSR_LSTATUS)) { /* Try to re-negotiate if we don't have link already. */ @@ -243,7 +252,8 @@ static int at91emac_phy_init(struct eth_device *netdev) return 2; for (i = 0; i < 100000 / 100; i++) { - at91emac_read(emac, 0, MII_BMSR, &status); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_BMSR, &status); if (status & BMSR_LSTATUS) break; udelay(100); @@ -253,8 +263,10 @@ static int at91emac_phy_init(struct eth_device *netdev) VERBOSEP("%s: link down\n", netdev->name); return 3; } else { - at91emac_read(emac, 0, MII_ADVERTISE, &adv); - at91emac_read(emac, 0, MII_LPA, &lpa); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_ADVERTISE, &adv); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, + MII_LPA, &lpa); media = mii_nway_result(lpa & adv); speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); @@ -271,7 +283,7 @@ int at91emac_UpdateLinkSpeed(at91_emac_t *emac) { unsigned short stat1; - at91emac_read(emac, 0, MII_BMSR, &stat1); + at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1); if (!(stat1 & BMSR_LSTATUS)) /* link status up? */ return 1; @@ -348,14 +360,6 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) writel(1 << AT91_ID_EMAC, &pmc->pcer); writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); - DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", - cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), - cpu_to_le32(*((u32 *)netdev->enetaddr))); - writel(cpu_to_le32(*((u32 *)netdev->enetaddr)), &emac->sa2l); - writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), &emac->sa2h); - DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", - readl(&emac->sa2h), readl(&emac->sa2l)); - /* Init Ethernet buffers */ for (i = 0; i < RBF_FRAMEMAX; i++) { dev->rbfdt[i].addr = (unsigned long) NetRxPackets[i]; @@ -372,7 +376,7 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC | HCLK_DIV; #ifdef CONFIG_RMII - value |= AT91C_EMAC_RMII; + value |= AT91_EMAC_CFG_RMII; #endif writel(value, &emac->cfg); @@ -456,6 +460,25 @@ static int at91emac_recv(struct eth_device *netdev) return 0; } +static int at91emac_write_hwaddr(struct eth_device *netdev) +{ + emac_device *dev; + at91_emac_t *emac; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + emac = (at91_emac_t *) netdev->iobase; + dev = (emac_device *) netdev->priv; + + writel(1 << AT91_ID_EMAC, &pmc->pcer); + DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", + cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), + cpu_to_le32(*((u32 *)netdev->enetaddr))); + writel(cpu_to_le32(*((u32 *)netdev->enetaddr)), &emac->sa2l); + writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), &emac->sa2h); + DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", + readl(&emac->sa2h), readl(&emac->sa2l)); + return 0; +} + int at91emac_register(bd_t *bis, unsigned long iobase) { emac_device *emac; @@ -488,6 +511,7 @@ int at91emac_register(bd_t *bis, unsigned long iobase) dev->halt = at91emac_halt; dev->send = at91emac_send; dev->recv = at91emac_recv; + dev->write_hwaddr = at91emac_write_hwaddr; eth_register(dev); diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c index d843397..bc3e6ad 100644 --- a/drivers/net/ax88180.c +++ b/drivers/net/ax88180.c @@ -41,6 +41,7 @@ #include <command.h> #include <net.h> #include <malloc.h> +#include <linux/mii.h> #include "ax88180.h" /* @@ -50,9 +51,9 @@ */ static void ax88180_rx_handler (struct eth_device *dev); static int ax88180_phy_initial (struct eth_device *dev); -static void ax88180_meidia_config (struct eth_device *dev); -static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev); -static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev); +static void ax88180_media_config (struct eth_device *dev); +static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev); +static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev); static unsigned short ax88180_mdio_read (struct eth_device *dev, unsigned long regaddr); static void ax88180_mdio_write (struct eth_device *dev, @@ -112,10 +113,10 @@ static int ax88180_phy_reset (struct eth_device *dev) { unsigned short delay_cnt = 500; - ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN)); + ax88180_mdio_write (dev, MII_BMCR, (BMCR_RESET | BMCR_ANENABLE)); /* Wait for the reset to complete, or time out (500 ms) */ - while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) { + while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) { udelay (1000); if (--delay_cnt == 0) { printf ("Failed to reset PHY!\n"); @@ -255,52 +256,78 @@ static int ax88180_phy_initial (struct eth_device *dev) { struct ax88180_private *priv = (struct ax88180_private *)dev->priv; unsigned long tmp_regval; + unsigned short phyaddr; - /* Check avaliable PHY chipset */ - priv->PhyAddr = MARVELL_88E1111_PHYADDR; - priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0); - - if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) { - - debug ("ax88180: Found Marvell 88E1111 PHY." - " (PHY Addr=0x%x)\n", priv->PhyAddr); - - tmp_regval = ax88180_mdio_read (dev, M88_EXT_SSR); - if ((tmp_regval & HWCFG_MODE_MASK) == RGMII_COPPER_MODE) { + /* Search for first avaliable PHY chipset */ +#ifdef CONFIG_PHY_ADDR + phyaddr = CONFIG_PHY_ADDR; +#else + for (phyaddr = 0; phyaddr < 32; ++phyaddr) +#endif + { + priv->PhyAddr = phyaddr; + priv->PhyID0 = ax88180_mdio_read(dev, MII_PHYSID1); + priv->PhyID1 = ax88180_mdio_read(dev, MII_PHYSID2); + + switch (priv->PhyID0) { + case MARVELL_ALASKA_PHYSID0: + debug("ax88180: Found Marvell Alaska PHY family." + " (PHY Addr=0x%x)\n", priv->PhyAddr); + + switch (priv->PhyID1) { + case MARVELL_88E1118_PHYSID1: + ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 2); + ax88180_mdio_write(dev, M88E1118_CR, + M88E1118_CR_DEFAULT); + ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 3); + ax88180_mdio_write(dev, M88E1118_LEDCTL, + M88E1118_LEDCTL_DEFAULT); + ax88180_mdio_write(dev, M88E1118_LEDMIX, + M88E1118_LEDMIX_LED050 | M88E1118_LEDMIX_LED150 | 0x15); + ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 0); + default: /* Default to 88E1111 Phy */ + tmp_regval = ax88180_mdio_read(dev, M88E1111_EXT_SSR); + if ((tmp_regval & HWCFG_MODE_MASK) != RGMII_COPPER_MODE) + ax88180_mdio_write(dev, M88E1111_EXT_SCR, + DEFAULT_EXT_SCR); + } - ax88180_mdio_write (dev, M88_EXT_SCR, DEFAULT_EXT_SCR); - if (ax88180_phy_reset (dev) < 0) + if (ax88180_phy_reset(dev) < 0) return 0; - ax88180_mdio_write (dev, M88_IER, LINK_CHANGE_INT); - } - } else { + ax88180_mdio_write(dev, M88_IER, LINK_CHANGE_INT); - priv->PhyAddr = CICADA_CIS8201_PHYADDR; - priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0); + return 1; - if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) { + case CICADA_CIS8201_PHYSID0: + debug("ax88180: Found CICADA CIS8201 PHY" + " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr); - debug ("ax88180: Found CICADA CIS8201 PHY" - " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr); - ax88180_mdio_write (dev, CIS_IMR, + ax88180_mdio_write(dev, CIS_IMR, (CIS_INT_ENABLE | LINK_CHANGE_INT)); /* Set CIS_SMI_PRIORITY bit before force the media mode */ - tmp_regval = - ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS); + tmp_regval = ax88180_mdio_read(dev, CIS_AUX_CTRL_STATUS); tmp_regval &= ~CIS_SMI_PRIORITY; - ax88180_mdio_write (dev, CIS_AUX_CTRL_STATUS, - tmp_regval); - } else { - printf ("ax88180: Unknown PHY chipset!!\n"); - return 0; + ax88180_mdio_write(dev, CIS_AUX_CTRL_STATUS, tmp_regval); + + return 1; + + case 0xffff: + /* No PHY at this addr */ + break; + + default: + printf("ax88180: Unknown PHY chipset %#x at addr %#x\n", + priv->PhyID0, priv->PhyAddr); + break; } } - return 1; + printf("ax88180: Unknown PHY chipset!!\n"); + return 0; } -static void ax88180_meidia_config (struct eth_device *dev) +static void ax88180_media_config (struct eth_device *dev) { struct ax88180_private *priv = (struct ax88180_private *)dev->priv; unsigned long bmcr_val, bmsr_val; @@ -310,20 +337,20 @@ static void ax88180_meidia_config (struct eth_device *dev) /* Waiting 2 seconds for PHY link stable */ for (i = 0; i < 20000; i++) { - bmsr_val = ax88180_mdio_read (dev, BMSR); - if (bmsr_val & LINKOK) { + bmsr_val = ax88180_mdio_read (dev, MII_BMSR); + if (bmsr_val & BMSR_LSTATUS) { break; } udelay (100); } - bmsr_val = ax88180_mdio_read (dev, BMSR); + bmsr_val = ax88180_mdio_read (dev, MII_BMSR); debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val); - if (bmsr_val & LINKOK) { - bmcr_val = ax88180_mdio_read (dev, BMCR); + if (bmsr_val & BMSR_LSTATUS) { + bmcr_val = ax88180_mdio_read (dev, MII_BMCR); - if (bmcr_val & AUTONEG_EN) { + if (bmcr_val & BMCR_ANENABLE) { /* * Waiting for Auto-negotiation completion, this may @@ -332,8 +359,8 @@ static void ax88180_meidia_config (struct eth_device *dev) debug ("ax88180: Auto-negotiation is " "enabled. Waiting for NWay completion..\n"); for (i = 0; i < 50000; i++) { - bmsr_val = ax88180_mdio_read (dev, BMSR); - if (bmsr_val & AUTONEG_COMPLETE) { + bmsr_val = ax88180_mdio_read (dev, MII_BMSR); + if (bmsr_val & BMSR_ANEGCOMPLETE) { break; } udelay (100); @@ -345,12 +372,16 @@ static void ax88180_meidia_config (struct eth_device *dev) (unsigned int)bmcr_val, (unsigned int)bmsr_val); /* Get real media mode here */ - if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) { - RealMediaMode = get_MarvellPHY_meida_mode (dev); - } else if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) { - RealMediaMode = get_CicadaPHY_meida_mode (dev); - } else { + switch (priv->PhyID0) { + case MARVELL_ALASKA_PHYSID0: + RealMediaMode = get_MarvellPHY_media_mode(dev); + break; + case CICADA_CIS8201_PHYSID0: + RealMediaMode = get_CicadaPHY_media_mode(dev); + break; + default: RealMediaMode = MEDIA_1000FULL; + break; } priv->LinkState = INS_LINK_UP; @@ -424,7 +455,7 @@ static void ax88180_meidia_config (struct eth_device *dev) return; } -static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev) +static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev) { unsigned long m88_ssr; unsigned long MediaMode; @@ -457,7 +488,7 @@ static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev) return MediaMode; } -static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev) +static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev) { unsigned long tmp_regval; unsigned long MediaMode; @@ -522,7 +553,7 @@ static int ax88180_init (struct eth_device *dev, bd_t * bd) dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8); OUTW (dev, tmp_regval, MACID2); - ax88180_meidia_config (dev); + ax88180_media_config (dev); OUTW (dev, DEFAULT_RXFILTER, RXFILTER); @@ -558,7 +589,7 @@ static int ax88180_recv (struct eth_device *dev) if (ISR_Status & ISR_PHY) { /* Read ISR register once to clear PHY interrupt bit */ tmp_regval = ax88180_mdio_read (dev, M88_ISR); - ax88180_meidia_config (dev); + ax88180_media_config (dev); } if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) { diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h index d2113df..daf18e0 100644 --- a/drivers/net/ax88180.h +++ b/drivers/net/ax88180.h @@ -19,6 +19,7 @@ #ifndef _AX88180_H_ #define _AX88180_H_ +#include <asm/io.h> #include <asm/types.h> #include <config.h> @@ -33,6 +34,7 @@ struct ax88180_private { unsigned char PadSize; unsigned short PhyAddr; unsigned short PhyID0; + unsigned short PhyID1; unsigned short FirstTxDesc; unsigned short NextTxDesc; ax88180_link_state LinkState; @@ -63,11 +65,10 @@ struct ax88180_private { /* Max Rx Jumbo size is 15K Bytes */ #define MAX_RX_SIZE 0x3C00 -#define MARVELL_88E1111_PHYADDR 0x18 -#define MARVELL_88E1111_PHYIDR0 0x0141 +#define MARVELL_ALASKA_PHYSID0 0x141 +#define MARVELL_88E1118_PHYSID1 0xE40 -#define CICADA_CIS8201_PHYADDR 0x01 -#define CICADA_CIS8201_PHYIDR0 0x000F +#define CICADA_CIS8201_PHYSID0 0x000F #define MEDIA_AUTO 0 #define MEDIA_1000FULL 1 @@ -278,50 +279,6 @@ struct ax88180_private { #define SOFTRST_NORMAL 0x00000003 #define SOFTRST_RESET_MAC 0x00000002 -/* External PHY Register Definition */ -#define BMCR 0x0000 - #define LINE_SPEED_MSB 0x0040 - #define DUPLEX_MODE 0x0100 - #define RESTART_AUTONEG 0x0200 - #define POWER_DOWN 0x0800 - #define AUTONEG_EN 0x1000 - #define LINE_SPEED_LSB 0x2000 - #define PHY_RESET 0x8000 - - #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\ - DUPLEX_MODE) - #define BMCR_SPEED_1000 LINE_SPEED_MSB - #define BMCR_SPEED_100 LINE_SPEED_LSB - #define BMCR_SPEED_10 0x0000 - - #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE) - #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE) - #define BMCR_100HALF BMCR_SPEED_100 - #define BMCR_10FULL DUPLEX_MODE - #define BMCR_10HALF 0x0000 -#define BMSR 0x0001 - #define LINKOK 0x0004 - #define AUTONEG_ENABLE_STS 0x0008 - #define AUTONEG_COMPLETE 0x0020 -#define PHYIDR0 0x0002 -#define PHYIDR1 0x0003 -#define ANAR 0x0004 - #define ANAR_PAUSE 0x0400 - #define ANAR_100FULL 0x0100 - #define ANAR_100HALF 0x0080 - #define ANAR_10FULL 0x0040 - #define ANAR_10HALF 0x0020 - #define ANAR_8023BIT 0x0001 -#define ANLPAR 0x0005 -#define ANER 0x0006 -#define AUX_1000_CTRL 0x0009 - #define ENABLE_1000HALF 0x0100 - #define ENABLE_1000FULL 0x0200 - #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL) -#define AUX_1000_STATUS 0x000A - #define LP_1000HALF 0x0400 - #define LP_1000FULL 0x0800 - /* Marvell 88E1111 Gigabit PHY Register Definition */ #define M88_SSR 0x0011 #define SSR_SPEED_MASK 0xC000 @@ -342,14 +299,36 @@ struct ax88180_private { #define LINK_CHANGE_INT 0x0400 #define M88_ISR 0x0013 #define LINK_CHANGE_STATUS 0x0400 -#define M88_EXT_SCR 0x0014 +#define M88E1111_EXT_SCR 0x0014 #define RGMII_RXCLK_DELAY 0x0080 #define RGMII_TXCLK_DELAY 0x0002 #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY) -#define M88_EXT_SSR 0x001B +#define M88E1111_EXT_SSR 0x001B #define HWCFG_MODE_MASK 0x000F #define RGMII_COPPER_MODE 0x000B +/* Marvell 88E1118 Gigabit PHY Register Definition */ +#define M88E1118_CR 0x14 + #define M88E1118_CR_RGMII_RXCLK_DELAY 0x0020 + #define M88E1118_CR_RGMII_TXCLK_DELAY 0x0010 + #define M88E1118_CR_DEFAULT (M88E1118_CR_RGMII_TXCLK_DELAY | \ + M88E1118_CR_RGMII_RXCLK_DELAY) +#define M88E1118_LEDCTL 0x10 /* Reg 16 on page 3 */ + #define M88E1118_LEDCTL_LED2INT 0x200 + #define M88E1118_LEDCTL_LED2BLNK 0x400 + #define M88E1118_LEDCTL_LED0DUALMODE1 0xc + #define M88E1118_LEDCTL_LED0DUALMODE2 0xd + #define M88E1118_LEDCTL_LED0DUALMODE3 0xe + #define M88E1118_LEDCTL_LED0DUALMODE4 0xf + #define M88E1118_LEDCTL_DEFAULT (M88E1118_LEDCTL_LED2BLNK | \ + M88E1118_LEDCTL_LED0DUALMODE4) + +#define M88E1118_LEDMIX 0x11 /* Reg 17 on page 3 */ + #define M88E1118_LEDMIX_LED050 0x4 + #define M88E1118_LEDMIX_LED150 0x8 + +#define M88E1118_PAGE_SEL 0x16 /* Reg page select */ + /* CICADA CIS8201 Gigabit PHY Register Definition */ #define CIS_IMR 0x0019 #define CIS_INT_ENABLE 0x8000 @@ -376,36 +355,41 @@ struct ax88180_private { static inline unsigned short INW (struct eth_device *dev, unsigned long addr) { - return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase)); -} - -static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) -{ - *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command); + return le16_to_cpu(readw(addr + (void *)dev->iobase)); } /* Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer */ #if defined (CONFIG_DRIVER_AX88180_16BIT) +static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) +{ + writew(cpu_to_le16(command), addr + (void *)dev->iobase); +} + static inline unsigned short READ_RXBUF (struct eth_device *dev) { - return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase)); + return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase)); } static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data) { - *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data); + writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase); } #else +static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) +{ + writel(cpu_to_le32(command), addr + (void *)dev->iobase); +} + static inline unsigned long READ_RXBUF (struct eth_device *dev) { - return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase)); + return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase)); } static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data) { - *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data); + writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase); } #endif diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 720e126..e691bdf 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -16,6 +16,7 @@ #include <linux/mii.h> #include <asm/blackfin.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> #include <asm/mach-common/bits/emac.h> #include <asm/mach-common/bits/pll.h> @@ -98,7 +99,7 @@ int bfin_EMAC_initialize(bd_t *bis) hang(); memset(dev, 0, sizeof(*dev)); - sprintf(dev->name, "Blackfin EMAC"); + strcpy(dev->name, "bfin_mac"); dev->iobase = 0; dev->priv = 0; @@ -213,8 +214,17 @@ static int bfin_EMAC_recv(struct eth_device *dev) /* MDC = SCLK / MDC_freq / 2 - 1 */ #define MDC_FREQ_TO_DIV(mdc_freq) (get_sclk() / (mdc_freq) / 2 - 1) +#ifndef CONFIG_BFIN_MAC_PINS +# ifdef CONFIG_RMII +# define CONFIG_BFIN_MAC_PINS P_RMII0 +# else +# define CONFIG_BFIN_MAC_PINS P_MII0 +# endif +#endif + static int bfin_miiphy_init(struct eth_device *dev, int *opmode) { + const unsigned short pins[] = CONFIG_BFIN_MAC_PINS; u16 phydat; size_t count; @@ -222,42 +232,7 @@ static int bfin_miiphy_init(struct eth_device *dev, int *opmode) *pVR_CTL |= CLKBUFOE; /* Set all the pins to peripheral mode */ -#ifdef CONFIG_RMII - /* grab RMII pins */ -# if defined(__ADSPBF51x__) - *pPORTF_MUX = (*pPORTF_MUX & \ - ~(PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \ - PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1; - *pPORTF_FER |= PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15; - *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1; - *pPORTG_FER |= PG0 | PG1 | PG2; -# elif defined(__ADSPBF52x__) - *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2; - *pPORTG_FER |= PG14 | PG15; - *pPORTH_MUX = (*pPORTH_MUX & ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK)) | \ - PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2; - *pPORTH_FER |= PH0 | PH1 | PH2 | PH3 | PH4 | PH5 | PH6 | PH7 | PH8; -# else - *pPORTH_FER |= PH0 | PH1 | PH4 | PH5 | PH6 | PH8 | PH9 | PH14 | PH15; -# endif -#else - /* grab MII & RMII pins */ -# if defined(__ADSPBF51x__) - *pPORTF_MUX = (*pPORTF_MUX & \ - ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \ - PORT_x_MUX_0_FUNC_1 | PORT_x_MUX_1_FUNC_1 | PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1; - *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15; - *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1; - *pPORTG_FER |= PG0 | PG1 | PG2; -# elif defined(__ADSPBF52x__) - *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2; - *pPORTG_FER |= PG14 | PG15; - *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2 | PORT_x_MUX_2_FUNC_2; - *pPORTH_FER = -1; /* all pins */ -# else - *pPORTH_FER = -1; /* all pins */ -# endif -#endif + peripheral_request_list(pins, "bfin_mac"); /* Odd word alignment for Receive Frame DMA word */ /* Configure checksum support and rcve frame word alignment */ diff --git a/drivers/net/designware.c b/drivers/net/designware.c new file mode 100644 index 0000000..d0d9827 --- /dev/null +++ b/drivers/net/designware.c @@ -0,0 +1,531 @@ +/* + * (C) Copyright 2010 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Designware ethernet IP driver for u-boot + */ + +#include <common.h> +#include <miiphy.h> +#include <malloc.h> +#include <linux/err.h> +#include <asm/io.h> +#include "designware.h" + +static void tx_descs_init(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_dma_regs *dma_p = priv->dma_regs_p; + struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0]; + char *txbuffs = &priv->txbuffs[0]; + struct dmamacdescr *desc_p; + u32 idx; + + for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) { + desc_p = &desc_table_p[idx]; + desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE]; + desc_p->dmamac_next = &desc_table_p[idx + 1]; + +#if defined(CONFIG_DW_ALTDESCRIPTOR) + desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST | + DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \ + DESC_TXSTS_TXCHECKINSCTRL | \ + DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS); + + desc_p->txrx_status |= DESC_TXSTS_TXCHAIN; + desc_p->dmamac_cntl = 0; + desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA); +#else + desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN; + desc_p->txrx_status = 0; +#endif + } + + /* Correcting the last pointer of the chain */ + desc_p->dmamac_next = &desc_table_p[0]; + + writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr); +} + +static void rx_descs_init(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_dma_regs *dma_p = priv->dma_regs_p; + struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0]; + char *rxbuffs = &priv->rxbuffs[0]; + struct dmamacdescr *desc_p; + u32 idx; + + for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) { + desc_p = &desc_table_p[idx]; + desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE]; + desc_p->dmamac_next = &desc_table_p[idx + 1]; + + desc_p->dmamac_cntl = + (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \ + DESC_RXCTRL_RXCHAIN; + + desc_p->txrx_status = DESC_RXSTS_OWNBYDMA; + } + + /* Correcting the last pointer of the chain */ + desc_p->dmamac_next = &desc_table_p[0]; + + writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr); +} + +static void descs_init(struct eth_device *dev) +{ + tx_descs_init(dev); + rx_descs_init(dev); +} + +static int mac_reset(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + struct eth_dma_regs *dma_p = priv->dma_regs_p; + + int timeout = CONFIG_MACRESET_TIMEOUT; + + writel(DMAMAC_SRST, &dma_p->busmode); + writel(MII_PORTSELECT, &mac_p->conf); + + do { + if (!(readl(&dma_p->busmode) & DMAMAC_SRST)) + return 0; + udelay(1000); + } while (timeout--); + + return -1; +} + +static int dw_write_hwaddr(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + u32 macid_lo, macid_hi; + u8 *mac_id = &dev->enetaddr[0]; + + macid_lo = mac_id[0] + (mac_id[1] << 8) + \ + (mac_id[2] << 16) + (mac_id[3] << 24); + macid_hi = mac_id[4] + (mac_id[5] << 8); + + writel(macid_hi, &mac_p->macaddr0hi); + writel(macid_lo, &mac_p->macaddr0lo); + + return 0; +} + +static int dw_eth_init(struct eth_device *dev, bd_t *bis) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + struct eth_dma_regs *dma_p = priv->dma_regs_p; + u32 conf; + + /* Reset ethernet hardware */ + if (mac_reset(dev) < 0) + return -1; + + writel(FIXEDBURST | PRIORXTX_41 | BURST_16, + &dma_p->busmode); + + writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode); + writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode); + + conf = FRAMEBURSTENABLE | DISABLERXOWN; + + if (priv->speed != SPEED_1000M) + conf |= MII_PORTSELECT; + + if (priv->duplex == FULL_DUPLEX) + conf |= FULLDPLXMODE; + + writel(conf, &mac_p->conf); + + descs_init(dev); + + /* + * Start/Enable xfer at dma as well as mac level + */ + writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode); + writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode); + + writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf); + writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf); + + return 0; +} + +static int dw_eth_send(struct eth_device *dev, volatile void *packet, + int length) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_dma_regs *dma_p = priv->dma_regs_p; + u32 desc_num = priv->tx_currdescnum; + struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; + + /* Check if the descriptor is owned by CPU */ + if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { + printf("CPU not owner of tx frame\n"); + return -1; + } + + memcpy((void *)desc_p->dmamac_addr, (void *)packet, length); + +#if defined(CONFIG_DW_ALTDESCRIPTOR) + desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST; + desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \ + DESC_TXCTRL_SIZE1MASK; + + desc_p->txrx_status &= ~(DESC_TXSTS_MSK); + desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA; +#else + desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \ + DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \ + DESC_TXCTRL_TXFIRST; + + desc_p->txrx_status = DESC_TXSTS_OWNBYDMA; +#endif + + /* Test the wrap-around condition. */ + if (++desc_num >= CONFIG_TX_DESCR_NUM) + desc_num = 0; + + priv->tx_currdescnum = desc_num; + + /* Start the transmission */ + writel(POLL_DATA, &dma_p->txpolldemand); + + return 0; +} + +static int dw_eth_recv(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + u32 desc_num = priv->rx_currdescnum; + struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; + + u32 status = desc_p->txrx_status; + int length = 0; + + /* Check if the owner is the CPU */ + if (!(status & DESC_RXSTS_OWNBYDMA)) { + + length = (status & DESC_RXSTS_FRMLENMSK) >> \ + DESC_RXSTS_FRMLENSHFT; + + NetReceive(desc_p->dmamac_addr, length); + + /* + * Make the current descriptor valid again and go to + * the next one + */ + desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA; + + /* Test the wrap-around condition. */ + if (++desc_num >= CONFIG_RX_DESCR_NUM) + desc_num = 0; + } + + priv->rx_currdescnum = desc_num; + + return length; +} + +static void dw_eth_halt(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + + mac_reset(dev); + priv->tx_currdescnum = priv->rx_currdescnum = 0; +} + +static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + u32 miiaddr; + int timeout = CONFIG_MDIO_TIMEOUT; + + miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ + ((reg << MIIREGSHIFT) & MII_REGMSK); + + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); + + do { + if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { + *val = readl(&mac_p->miidata); + return 0; + } + udelay(1000); + } while (timeout--); + + return -1; +} + +static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + u32 miiaddr; + int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; + u16 value; + + writel(val, &mac_p->miidata); + miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ + ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE; + + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); + + do { + if (!(readl(&mac_p->miiaddr) & MII_BUSY)) + ret = 0; + udelay(1000); + } while (timeout--); + + /* Needed as a fix for ST-Phy */ + eth_mdio_read(dev, addr, reg, &value); + + return ret; +} + +#if defined(CONFIG_DW_SEARCH_PHY) +static int find_phy(struct eth_device *dev) +{ + int phy_addr = 0; + u16 ctrl, oldctrl; + + do { + eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); + oldctrl = ctrl & PHY_BMCR_AUTON; + + ctrl ^= PHY_BMCR_AUTON; + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl); + eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); + ctrl &= PHY_BMCR_AUTON; + + if (ctrl == oldctrl) { + phy_addr++; + } else { + ctrl ^= PHY_BMCR_AUTON; + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl); + + return phy_addr; + } + } while (phy_addr < 32); + + return -1; +} +#endif + +static int dw_reset_phy(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + u16 ctrl; + int timeout = CONFIG_PHYRESET_TIMEOUT; + u32 phy_addr = priv->address; + + eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET); + do { + eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); + if (!(ctrl & PHY_BMCR_RESET)) + break; + udelay(1000); + } while (timeout--); + + if (timeout < 0) + return -1; + +#ifdef CONFIG_PHY_RESET_DELAY + udelay(CONFIG_PHY_RESET_DELAY); +#endif + return 0; +} + +static int configure_phy(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + int phy_addr; + u16 bmcr, ctrl; +#if defined(CONFIG_DW_AUTONEG) + u16 bmsr; + u32 timeout; + u16 anlpar, btsr; +#endif + +#if defined(CONFIG_DW_SEARCH_PHY) + phy_addr = find_phy(dev); + if (phy_addr > 0) + priv->address = phy_addr; + else + return -1; +#endif + if (dw_reset_phy(dev) < 0) + return -1; + +#if defined(CONFIG_DW_AUTONEG) + bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \ + PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS; +#else + bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX; + +#if defined(CONFIG_DW_SPEED10M) + bmcr &= ~PHY_BMCR_100MB; +#endif +#if defined(CONFIG_DW_DUPLEXHALF) + bmcr &= ~PHY_BMCR_DPLX; +#endif +#endif + if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0) + return -1; + + /* Read the phy status register and populate priv structure */ +#if defined(CONFIG_DW_AUTONEG) + timeout = CONFIG_AUTONEG_TIMEOUT; + do { + eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr); + if (bmsr & PHY_BMSR_AUTN_COMP) + break; + udelay(1000); + } while (timeout--); + + eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar); + eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr); + + if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { + priv->speed = SPEED_1000M; + if (btsr & PHY_1000BTSR_1000FD) + priv->duplex = FULL_DUPLEX; + else + priv->duplex = HALF_DUPLEX; + } else { + if (anlpar & PHY_ANLPAR_100) + priv->speed = SPEED_100M; + else + priv->speed = SPEED_10M; + + if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) + priv->duplex = FULL_DUPLEX; + else + priv->duplex = HALF_DUPLEX; + } +#else + if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0) + return -1; + + if (ctrl & PHY_BMCR_DPLX) + priv->duplex = FULL_DUPLEX; + else + priv->duplex = HALF_DUPLEX; + + if (ctrl & PHY_BMCR_1000_MBPS) + priv->speed = SPEED_1000M; + else if (ctrl & PHY_BMCR_100_MBPS) + priv->speed = SPEED_100M; + else + priv->speed = SPEED_10M; +#endif + return 0; +} + +#if defined(CONFIG_MII) +static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val) +{ + struct eth_device *dev; + + dev = eth_get_dev_by_name(devname); + if (dev) + eth_mdio_read(dev, addr, reg, val); + + return 0; +} + +static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val) +{ + struct eth_device *dev; + + dev = eth_get_dev_by_name(devname); + if (dev) + eth_mdio_write(dev, addr, reg, val); + + return 0; +} +#endif + +int designware_initialize(u32 id, ulong base_addr, u32 phy_addr) +{ + struct eth_device *dev; + struct dw_eth_dev *priv; + + dev = (struct eth_device *) malloc(sizeof(struct eth_device)); + if (!dev) + return -ENOMEM; + + /* + * Since the priv structure contains the descriptors which need a strict + * buswidth alignment, memalign is used to allocate memory + */ + priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev)); + if (!priv) { + free(dev); + return -ENOMEM; + } + + memset(dev, 0, sizeof(struct eth_device)); + memset(priv, 0, sizeof(struct dw_eth_dev)); + + sprintf(dev->name, "mii%d", id); + dev->iobase = (int)base_addr; + dev->priv = priv; + + eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]); + + priv->dev = dev; + priv->mac_regs_p = (struct eth_mac_regs *)base_addr; + priv->dma_regs_p = (struct eth_dma_regs *)(base_addr + + DW_DMA_BASE_OFFSET); + priv->address = phy_addr; + + if (mac_reset(dev) < 0) + return -1; + + if (configure_phy(dev) < 0) { + printf("Phy could not be configured\n"); + return -1; + } + + dev->init = dw_eth_init; + dev->send = dw_eth_send; + dev->recv = dw_eth_recv; + dev->halt = dw_eth_halt; + dev->write_hwaddr = dw_write_hwaddr; + + eth_register(dev); + +#if defined(CONFIG_MII) + miiphy_register(dev->name, dw_mii_read, dw_mii_write); +#endif + return 1; +} diff --git a/drivers/net/designware.h b/drivers/net/designware.h new file mode 100644 index 0000000..e5828a6 --- /dev/null +++ b/drivers/net/designware.h @@ -0,0 +1,264 @@ +/* + * (C) Copyright 2010 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _DW_ETH_H +#define _DW_ETH_H + +#define CONFIG_TX_DESCR_NUM 16 +#define CONFIG_RX_DESCR_NUM 16 +#define CONFIG_ETH_BUFSIZE 2048 +#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM) +#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM) + +#define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ) +#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ) +#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ) +#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ) + +struct eth_mac_regs { + u32 conf; /* 0x00 */ + u32 framefilt; /* 0x04 */ + u32 hashtablehigh; /* 0x08 */ + u32 hashtablelow; /* 0x0c */ + u32 miiaddr; /* 0x10 */ + u32 miidata; /* 0x14 */ + u32 flowcontrol; /* 0x18 */ + u32 vlantag; /* 0x1c */ + u32 version; /* 0x20 */ + u8 reserved_1[20]; + u32 intreg; /* 0x38 */ + u32 intmask; /* 0x3c */ + u32 macaddr0hi; /* 0x40 */ + u32 macaddr0lo; /* 0x44 */ +}; + +/* MAC configuration register definitions */ +#define FRAMEBURSTENABLE (1 << 21) +#define MII_PORTSELECT (1 << 15) +#define FES_100 (1 << 14) +#define DISABLERXOWN (1 << 13) +#define FULLDPLXMODE (1 << 11) +#define RXENABLE (1 << 2) +#define TXENABLE (1 << 3) + +/* MII address register definitions */ +#define MII_BUSY (1 << 0) +#define MII_WRITE (1 << 1) +#define MII_CLKRANGE_60_100M (0) +#define MII_CLKRANGE_100_150M (0x4) +#define MII_CLKRANGE_20_35M (0x8) +#define MII_CLKRANGE_35_60M (0xC) +#define MII_CLKRANGE_150_250M (0x10) +#define MII_CLKRANGE_250_300M (0x14) + +#define MIIADDRSHIFT (11) +#define MIIREGSHIFT (6) +#define MII_REGMSK (0x1F << 6) +#define MII_ADDRMSK (0x1F << 11) + + +struct eth_dma_regs { + u32 busmode; /* 0x00 */ + u32 txpolldemand; /* 0x04 */ + u32 rxpolldemand; /* 0x08 */ + u32 rxdesclistaddr; /* 0x0c */ + u32 txdesclistaddr; /* 0x10 */ + u32 status; /* 0x14 */ + u32 opmode; /* 0x18 */ + u32 intenable; /* 0x1c */ + u8 reserved[40]; + u32 currhosttxdesc; /* 0x48 */ + u32 currhostrxdesc; /* 0x4c */ + u32 currhosttxbuffaddr; /* 0x50 */ + u32 currhostrxbuffaddr; /* 0x54 */ +}; + +#define DW_DMA_BASE_OFFSET (0x1000) + +/* Bus mode register definitions */ +#define FIXEDBURST (1 << 16) +#define PRIORXTX_41 (3 << 14) +#define PRIORXTX_31 (2 << 14) +#define PRIORXTX_21 (1 << 14) +#define PRIORXTX_11 (0 << 14) +#define BURST_1 (1 << 8) +#define BURST_2 (2 << 8) +#define BURST_4 (4 << 8) +#define BURST_8 (8 << 8) +#define BURST_16 (16 << 8) +#define BURST_32 (32 << 8) +#define RXHIGHPRIO (1 << 1) +#define DMAMAC_SRST (1 << 0) + +/* Poll demand definitions */ +#define POLL_DATA (0xFFFFFFFF) + +/* Operation mode definitions */ +#define STOREFORWARD (1 << 21) +#define FLUSHTXFIFO (1 << 20) +#define TXSTART (1 << 13) +#define TXSECONDFRAME (1 << 2) +#define RXSTART (1 << 1) + +/* Descriptior related definitions */ +#define MAC_MAX_FRAME_SZ (2048) + +struct dmamacdescr { + u32 txrx_status; + u32 dmamac_cntl; + void *dmamac_addr; + struct dmamacdescr *dmamac_next; +}; + +/* + * txrx_status definitions + */ + +/* tx status bits definitions */ +#if defined(CONFIG_DW_ALTDESCRIPTOR) + +#define DESC_TXSTS_OWNBYDMA (1 << 31) +#define DESC_TXSTS_TXINT (1 << 30) +#define DESC_TXSTS_TXLAST (1 << 29) +#define DESC_TXSTS_TXFIRST (1 << 28) +#define DESC_TXSTS_TXCRCDIS (1 << 27) + +#define DESC_TXSTS_TXPADDIS (1 << 26) +#define DESC_TXSTS_TXCHECKINSCTRL (3 << 22) +#define DESC_TXSTS_TXRINGEND (1 << 21) +#define DESC_TXSTS_TXCHAIN (1 << 20) +#define DESC_TXSTS_MSK (0x1FFFF << 0) + +#else + +#define DESC_TXSTS_OWNBYDMA (1 << 31) +#define DESC_TXSTS_MSK (0x1FFFF << 0) + +#endif + +/* rx status bits definitions */ +#define DESC_RXSTS_OWNBYDMA (1 << 31) +#define DESC_RXSTS_DAFILTERFAIL (1 << 30) +#define DESC_RXSTS_FRMLENMSK (0x3FFF << 16) +#define DESC_RXSTS_FRMLENSHFT (16) + +#define DESC_RXSTS_ERROR (1 << 15) +#define DESC_RXSTS_RXTRUNCATED (1 << 14) +#define DESC_RXSTS_SAFILTERFAIL (1 << 13) +#define DESC_RXSTS_RXIPC_GIANTFRAME (1 << 12) +#define DESC_RXSTS_RXDAMAGED (1 << 11) +#define DESC_RXSTS_RXVLANTAG (1 << 10) +#define DESC_RXSTS_RXFIRST (1 << 9) +#define DESC_RXSTS_RXLAST (1 << 8) +#define DESC_RXSTS_RXIPC_GIANT (1 << 7) +#define DESC_RXSTS_RXCOLLISION (1 << 6) +#define DESC_RXSTS_RXFRAMEETHER (1 << 5) +#define DESC_RXSTS_RXWATCHDOG (1 << 4) +#define DESC_RXSTS_RXMIIERROR (1 << 3) +#define DESC_RXSTS_RXDRIBBLING (1 << 2) +#define DESC_RXSTS_RXCRC (1 << 1) + +/* + * dmamac_cntl definitions + */ + +/* tx control bits definitions */ +#if defined(CONFIG_DW_ALTDESCRIPTOR) + +#define DESC_TXCTRL_SIZE1MASK (0x1FFF << 0) +#define DESC_TXCTRL_SIZE1SHFT (0) +#define DESC_TXCTRL_SIZE2MASK (0x1FFF << 16) +#define DESC_TXCTRL_SIZE2SHFT (16) + +#else + +#define DESC_TXCTRL_TXINT (1 << 31) +#define DESC_TXCTRL_TXLAST (1 << 30) +#define DESC_TXCTRL_TXFIRST (1 << 29) +#define DESC_TXCTRL_TXCHECKINSCTRL (3 << 27) +#define DESC_TXCTRL_TXCRCDIS (1 << 26) +#define DESC_TXCTRL_TXRINGEND (1 << 25) +#define DESC_TXCTRL_TXCHAIN (1 << 24) + +#define DESC_TXCTRL_SIZE1MASK (0x7FF << 0) +#define DESC_TXCTRL_SIZE1SHFT (0) +#define DESC_TXCTRL_SIZE2MASK (0x7FF << 11) +#define DESC_TXCTRL_SIZE2SHFT (11) + +#endif + +/* rx control bits definitions */ +#if defined(CONFIG_DW_ALTDESCRIPTOR) + +#define DESC_RXCTRL_RXINTDIS (1 << 31) +#define DESC_RXCTRL_RXRINGEND (1 << 15) +#define DESC_RXCTRL_RXCHAIN (1 << 14) + +#define DESC_RXCTRL_SIZE1MASK (0x1FFF << 0) +#define DESC_RXCTRL_SIZE1SHFT (0) +#define DESC_RXCTRL_SIZE2MASK (0x1FFF << 16) +#define DESC_RXCTRL_SIZE2SHFT (16) + +#else + +#define DESC_RXCTRL_RXINTDIS (1 << 31) +#define DESC_RXCTRL_RXRINGEND (1 << 25) +#define DESC_RXCTRL_RXCHAIN (1 << 24) + +#define DESC_RXCTRL_SIZE1MASK (0x7FF << 0) +#define DESC_RXCTRL_SIZE1SHFT (0) +#define DESC_RXCTRL_SIZE2MASK (0x7FF << 11) +#define DESC_RXCTRL_SIZE2SHFT (11) + +#endif + +struct dw_eth_dev { + u32 address; + u32 speed; + u32 duplex; + u32 tx_currdescnum; + u32 rx_currdescnum; + u32 padding; + + struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; + struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; + + char txbuffs[TX_TOTAL_BUFSIZE]; + char rxbuffs[RX_TOTAL_BUFSIZE]; + + struct eth_mac_regs *mac_regs_p; + struct eth_dma_regs *dma_regs_p; + + struct eth_device *dev; +} __attribute__ ((aligned(8))); + +/* Speed specific definitions */ +#define SPEED_10M 1 +#define SPEED_100M 2 +#define SPEED_1000M 3 + +/* Duplex mode specific definitions */ +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +#endif diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index 137e41f..709f67a 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -117,12 +117,12 @@ static void DM9000_iow(int reg, u8 value); /* DM9000 network board routine ---------------------------- */ -#define DM9000_outb(d,r) writeb(d, r) -#define DM9000_outw(d,r) writew(d, r) -#define DM9000_outl(d,r) writel(d, r) -#define DM9000_inb(r) readb(r) -#define DM9000_inw(r) readw(r) -#define DM9000_inl(r) readl(r) +#define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r)) +#define DM9000_outw(d,r) writew(d, (volatile u16 *)(r)) +#define DM9000_outl(d,r) writel(d, (volatile u32 *)(r)) +#define DM9000_inb(r) readb((volatile u8 *)(r)) +#define DM9000_inw(r) readw((volatile u16 *)(r)) +#define DM9000_inl(r) readl((volatile u32 *)(r)) #ifdef CONFIG_DM9000_DEBUG static void diff --git a/drivers/net/kirkwood_egiga.h b/drivers/net/kirkwood_egiga.h deleted file mode 100644 index 30c773c..0000000 --- a/drivers/net/kirkwood_egiga.h +++ /dev/null @@ -1,505 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * based on - Driver for MV64360X ethernet ports - * Copyright (C) 2002 rabeeh@galileo.co.il - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef __EGIGA_H__ -#define __EGIGA_H__ - -#define MAX_KWGBE_DEVS 2 /*controller has two ports */ - -/* PHY_BASE_ADR is board specific and can be configured */ -#if defined (CONFIG_PHY_BASE_ADR) -#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR -#else -#define PHY_BASE_ADR 0x08 /* default phy base addr */ -#endif - -/* Constants */ -#define INT_CAUSE_UNMASK_ALL 0x0007ffff -#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff -#define MRU_MASK 0xfff1ffff -#define PHYADR_MASK 0x0000001f -#define PHYREG_MASK 0x0000001f -#define QTKNBKT_DEF_VAL 0x3fffffff -#define QMTBS_DEF_VAL 0x000003ff -#define QTKNRT_DEF_VAL 0x0000fcff -#define RXUQ 0 /* Used Rx queue */ -#define TXUQ 0 /* Used Rx queue */ - -#define to_dkwgbe(_kd) container_of(_kd, struct kwgbe_device, dev) -#define KWGBEREG_WR(adr, val) writel(val, &adr) -#define KWGBEREG_RD(adr) readl(&adr) -#define KWGBEREG_BITS_RESET(adr, val) writel(readl(&adr) & ~(val), &adr) -#define KWGBEREG_BITS_SET(adr, val) writel(readl(&adr) | val, &adr) - -/* Default port configuration value */ -#define PRT_CFG_VAL ( \ - KWGBE_UCAST_MOD_NRML | \ - KWGBE_DFLT_RXQ(RXUQ) | \ - KWGBE_DFLT_RX_ARPQ(RXUQ) | \ - KWGBE_RX_BC_IF_NOT_IP_OR_ARP | \ - KWGBE_RX_BC_IF_IP | \ - KWGBE_RX_BC_IF_ARP | \ - KWGBE_CPTR_TCP_FRMS_DIS | \ - KWGBE_CPTR_UDP_FRMS_DIS | \ - KWGBE_DFLT_RX_TCPQ(RXUQ) | \ - KWGBE_DFLT_RX_UDPQ(RXUQ) | \ - KWGBE_DFLT_RX_BPDUQ(RXUQ)) - -/* Default port extend configuration value */ -#define PORT_CFG_EXTEND_VALUE \ - KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL | \ - KWGBE_PARTITION_DIS | \ - KWGBE_TX_CRC_GENERATION_EN - -#define GT_KWGBE_IPG_INT_RX(value) ((value & 0x3fff) << 8) - -/* Default sdma control value */ -#define PORT_SDMA_CFG_VALUE ( \ - KWGBE_RX_BURST_SIZE_16_64BIT | \ - KWGBE_BLM_RX_NO_SWAP | \ - KWGBE_BLM_TX_NO_SWAP | \ - GT_KWGBE_IPG_INT_RX(RXUQ) | \ - KWGBE_TX_BURST_SIZE_16_64BIT) - -/* Default port serial control value */ -#define PORT_SERIAL_CONTROL_VALUE ( \ - KWGBE_FORCE_LINK_PASS | \ - KWGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - KWGBE_ADV_NO_FLOW_CTRL | \ - KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - KWGBE_FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* Reserved bit has to be 1 */ | \ - KWGBE_DO_NOT_FORCE_LINK_FAIL | \ - KWGBE_EN_AUTO_NEG_SPEED_GMII | \ - KWGBE_DTE_ADV_0 | \ - KWGBE_MIIPHY_MAC_MODE | \ - KWGBE_AUTO_NEG_NO_CHANGE | \ - KWGBE_MAX_RX_PACKET_1552BYTE | \ - KWGBE_CLR_EXT_LOOPBACK | \ - KWGBE_SET_FULL_DUPLEX_MODE | \ - KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX) - -/* Tx WRR confoguration macros */ -#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */ -#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_FFFF /* PMTBS reg (default) */ -#define PORT_TOKEN_RATE 1023 /* PTTBRC reg (default) */ -/* MAC accepet/reject macros */ -#define ACCEPT_MAC_ADDR 0 -#define REJECT_MAC_ADDR 1 -/* Size of a Tx/Rx descriptor used in chain list data structure */ -#define KW_RXQ_DESC_ALIGNED_SIZE \ - (((sizeof(struct kwgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN) -/* Buffer offset from buffer pointer */ -#define RX_BUF_OFFSET 0x2 - -/* Port serial status reg (PSR) */ -#define KWGBE_INTERFACE_GMII_MII 0 -#define KWGBE_INTERFACE_PCM 1 -#define KWGBE_LINK_IS_DOWN 0 -#define KWGBE_LINK_IS_UP (1 << 1) -#define KWGBE_PORT_AT_HALF_DUPLEX 0 -#define KWGBE_PORT_AT_FULL_DUPLEX (1 << 2) -#define KWGBE_RX_FLOW_CTRL_DISD 0 -#define KWGBE_RX_FLOW_CTRL_ENBALED (1 << 3) -#define KWGBE_GMII_SPEED_100_10 0 -#define KWGBE_GMII_SPEED_1000 (1 << 4) -#define KWGBE_MII_SPEED_10 0 -#define KWGBE_MII_SPEED_100 (1 << 5) -#define KWGBE_NO_TX 0 -#define KWGBE_TX_IN_PROGRESS (1 << 7) -#define KWGBE_BYPASS_NO_ACTIVE 0 -#define KWGBE_BYPASS_ACTIVE (1 << 8) -#define KWGBE_PORT_NOT_AT_PARTN_STT 0 -#define KWGBE_PORT_AT_PARTN_STT (1 << 9) -#define KWGBE_PORT_TX_FIFO_NOT_EMPTY 0 -#define KWGBE_PORT_TX_FIFO_EMPTY (1 << 10) - -/* These macros describes the Port configuration reg (Px_cR) bits */ -#define KWGBE_UCAST_MOD_NRML 0 -#define KWGBE_UNICAST_PROMISCUOUS_MODE 1 -#define KWGBE_DFLT_RXQ(_x) (_x << 1) -#define KWGBE_DFLT_RX_ARPQ(_x) (_x << 4) -#define KWGBE_RX_BC_IF_NOT_IP_OR_ARP 0 -#define KWGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7) -#define KWGBE_RX_BC_IF_IP 0 -#define KWGBE_REJECT_BC_IF_IP (1 << 8) -#define KWGBE_RX_BC_IF_ARP 0 -#define KWGBE_REJECT_BC_IF_ARP (1 << 9) -#define KWGBE_TX_AM_NO_UPDATE_ERR_SMRY (1 << 12) -#define KWGBE_CPTR_TCP_FRMS_DIS 0 -#define KWGBE_CPTR_TCP_FRMS_EN (1 << 14) -#define KWGBE_CPTR_UDP_FRMS_DIS 0 -#define KWGBE_CPTR_UDP_FRMS_EN (1 << 15) -#define KWGBE_DFLT_RX_TCPQ(_x) (_x << 16) -#define KWGBE_DFLT_RX_UDPQ(_x) (_x << 19) -#define KWGBE_DFLT_RX_BPDUQ(_x) (_x << 22) -#define KWGBE_DFLT_RX_TCP_CHKSUM_MODE (1 << 25) - -/* These macros describes the Port configuration extend reg (Px_cXR) bits*/ -#define KWGBE_CLASSIFY_EN 1 -#define KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL 0 -#define KWGBE_SPAN_BPDU_PACKETS_TO_RX_Q7 (1 << 1) -#define KWGBE_PARTITION_DIS 0 -#define KWGBE_PARTITION_EN (1 << 2) -#define KWGBE_TX_CRC_GENERATION_EN 0 -#define KWGBE_TX_CRC_GENERATION_DIS (1 << 3) - -/* These macros describes the Port Sdma configuration reg (SDCR) bits */ -#define KWGBE_RIFB 1 -#define KWGBE_RX_BURST_SIZE_1_64BIT 0 -#define KWGBE_RX_BURST_SIZE_2_64BIT (1 << 1) -#define KWGBE_RX_BURST_SIZE_4_64BIT (1 << 2) -#define KWGBE_RX_BURST_SIZE_8_64BIT ((1 << 2) | (1 << 1)) -#define KWGBE_RX_BURST_SIZE_16_64BIT (1 << 3) -#define KWGBE_BLM_RX_NO_SWAP (1 << 4) -#define KWGBE_BLM_RX_BYTE_SWAP 0 -#define KWGBE_BLM_TX_NO_SWAP (1 << 5) -#define KWGBE_BLM_TX_BYTE_SWAP 0 -#define KWGBE_DESCRIPTORS_BYTE_SWAP (1 << 6) -#define KWGBE_DESCRIPTORS_NO_SWAP 0 -#define KWGBE_TX_BURST_SIZE_1_64BIT 0 -#define KWGBE_TX_BURST_SIZE_2_64BIT (1 << 22) -#define KWGBE_TX_BURST_SIZE_4_64BIT (1 << 23) -#define KWGBE_TX_BURST_SIZE_8_64BIT ((1 << 23) | (1 << 22)) -#define KWGBE_TX_BURST_SIZE_16_64BIT (1 << 24) - -/* These macros describes the Port serial control reg (PSCR) bits */ -#define KWGBE_SERIAL_PORT_DIS 0 -#define KWGBE_SERIAL_PORT_EN 1 -#define KWGBE_FORCE_LINK_PASS (1 << 1) -#define KWGBE_DO_NOT_FORCE_LINK_PASS 0 -#define KWGBE_EN_AUTO_NEG_FOR_DUPLX 0 -#define KWGBE_DIS_AUTO_NEG_FOR_DUPLX (1 << 2) -#define KWGBE_EN_AUTO_NEG_FOR_FLOW_CTRL 0 -#define KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL (1 << 3) -#define KWGBE_ADV_NO_FLOW_CTRL 0 -#define KWGBE_ADV_SYMMETRIC_FLOW_CTRL (1 << 4) -#define KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 -#define KWGBE_FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5) -#define KWGBE_FORCE_BP_MODE_NO_JAM 0 -#define KWGBE_FORCE_BP_MODE_JAM_TX (1 << 7) -#define KWGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1 << 8) -#define KWGBE_FORCE_LINK_FAIL 0 -#define KWGBE_DO_NOT_FORCE_LINK_FAIL (1 << 10) -#define KWGBE_DIS_AUTO_NEG_SPEED_GMII (1 << 13) -#define KWGBE_EN_AUTO_NEG_SPEED_GMII 0 -#define KWGBE_DTE_ADV_0 0 -#define KWGBE_DTE_ADV_1 (1 << 14) -#define KWGBE_MIIPHY_MAC_MODE 0 -#define KWGBE_MIIPHY_PHY_MODE (1 << 15) -#define KWGBE_AUTO_NEG_NO_CHANGE 0 -#define KWGBE_RESTART_AUTO_NEG (1 << 16) -#define KWGBE_MAX_RX_PACKET_1518BYTE 0 -#define KWGBE_MAX_RX_PACKET_1522BYTE (1 << 17) -#define KWGBE_MAX_RX_PACKET_1552BYTE (1 << 18) -#define KWGBE_MAX_RX_PACKET_9022BYTE ((1 << 18) | (1 << 17)) -#define KWGBE_MAX_RX_PACKET_9192BYTE (1 << 19) -#define KWGBE_MAX_RX_PACKET_9700BYTE ((1 << 19) | (1 << 17)) -#define KWGBE_SET_EXT_LOOPBACK (1 << 20) -#define KWGBE_CLR_EXT_LOOPBACK 0 -#define KWGBE_SET_FULL_DUPLEX_MODE (1 << 21) -#define KWGBE_SET_HALF_DUPLEX_MODE 0 -#define KWGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22) -#define KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 -#define KWGBE_SET_GMII_SPEED_TO_10_100 0 -#define KWGBE_SET_GMII_SPEED_TO_1000 (1 << 23) -#define KWGBE_SET_MII_SPEED_TO_10 0 -#define KWGBE_SET_MII_SPEED_TO_100 (1 << 24) - -/* SMI register fields */ -#define KWGBE_PHY_SMI_TIMEOUT 10000 -#define KWGBE_PHY_SMI_DATA_OFFS 0 /* Data */ -#define KWGBE_PHY_SMI_DATA_MASK (0xffff << KWGBE_PHY_SMI_DATA_OFFS) -#define KWGBE_PHY_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ -#define KWGBE_PHY_SMI_DEV_ADDR_MASK (PHYADR_MASK << KWGBE_PHY_SMI_DEV_ADDR_OFFS) -#define KWGBE_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr */ -#define KWGBE_SMI_REG_ADDR_MASK (PHYADR_MASK << KWGBE_SMI_REG_ADDR_OFFS) -#define KWGBE_PHY_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ -#define KWGBE_PHY_SMI_OPCODE_MASK (3 << KWGBE_PHY_SMI_OPCODE_OFFS) -#define KWGBE_PHY_SMI_OPCODE_WRITE (0 << KWGBE_PHY_SMI_OPCODE_OFFS) -#define KWGBE_PHY_SMI_OPCODE_READ (1 << KWGBE_PHY_SMI_OPCODE_OFFS) -#define KWGBE_PHY_SMI_READ_VALID_MASK (1 << 27) /* Read Valid */ -#define KWGBE_PHY_SMI_BUSY_MASK (1 << 28) /* Busy */ - -/* SDMA command status fields macros */ -/* Tx & Rx descriptors status */ -#define KWGBE_ERROR_SUMMARY 1 -/* Tx & Rx descriptors command */ -#define KWGBE_BUFFER_OWNED_BY_DMA (1 << 31) -/* Tx descriptors status */ -#define KWGBE_LC_ERROR 0 -#define KWGBE_UR_ERROR (1 << 1) -#define KWGBE_RL_ERROR (1 << 2) -#define KWGBE_LLC_SNAP_FORMAT (1 << 9) -#define KWGBE_TX_LAST_FRAME (1 << 20) - -/* Rx descriptors status */ -#define KWGBE_CRC_ERROR 0 -#define KWGBE_OVERRUN_ERROR (1 << 1) -#define KWGBE_MAX_FRAME_LENGTH_ERROR (1 << 2) -#define KWGBE_RESOURCE_ERROR ((1 << 2) | (1 << 1)) -#define KWGBE_VLAN_TAGGED (1 << 19) -#define KWGBE_BPDU_FRAME (1 << 20) -#define KWGBE_TCP_FRAME_OVER_IP_V_4 0 -#define KWGBE_UDP_FRAME_OVER_IP_V_4 (1 << 21) -#define KWGBE_OTHER_FRAME_TYPE (1 << 22) -#define KWGBE_LAYER_2_IS_KWGBE_V_2 (1 << 23) -#define KWGBE_FRAME_TYPE_IP_V_4 (1 << 24) -#define KWGBE_FRAME_HEADER_OK (1 << 25) -#define KWGBE_RX_LAST_DESC (1 << 26) -#define KWGBE_RX_FIRST_DESC (1 << 27) -#define KWGBE_UNKNOWN_DESTINATION_ADDR (1 << 28) -#define KWGBE_RX_EN_INTERRUPT (1 << 29) -#define KWGBE_LAYER_4_CHECKSUM_OK (1 << 30) - -/* Rx descriptors byte count */ -#define KWGBE_FRAME_FRAGMENTED (1 << 2) - -/* Tx descriptors command */ -#define KWGBE_LAYER_4_CHECKSUM_FIRST_DESC (1 << 10) -#define KWGBE_FRAME_SET_TO_VLAN (1 << 15) -#define KWGBE_TCP_FRAME 0 -#define KWGBE_UDP_FRAME (1 << 16) -#define KWGBE_GEN_TCP_UDP_CHECKSUM (1 << 17) -#define KWGBE_GEN_IP_V_4_CHECKSUM (1 << 18) -#define KWGBE_ZERO_PADDING (1 << 19) -#define KWGBE_TX_LAST_DESC (1 << 20) -#define KWGBE_TX_FIRST_DESC (1 << 21) -#define KWGBE_GEN_CRC (1 << 22) -#define KWGBE_TX_EN_INTERRUPT (1 << 23) -#define KWGBE_AUTO_MODE (1 << 30) - -/* Address decode parameters */ -/* Ethernet Base Address Register bits */ -#define EBAR_TARGET_DRAM 0x00000000 -#define EBAR_TARGET_DEVICE 0x00000001 -#define EBAR_TARGET_CBS 0x00000002 -#define EBAR_TARGET_PCI0 0x00000003 -#define EBAR_TARGET_PCI1 0x00000004 -#define EBAR_TARGET_CUNIT 0x00000005 -#define EBAR_TARGET_AUNIT 0x00000006 -#define EBAR_TARGET_GUNIT 0x00000007 - -/* Window attrib */ -#define EBAR_DRAM_CS0 0x00000E00 -#define EBAR_DRAM_CS1 0x00000D00 -#define EBAR_DRAM_CS2 0x00000B00 -#define EBAR_DRAM_CS3 0x00000700 - -/* DRAM Target interface */ -#define EBAR_DRAM_NO_CACHE_COHERENCY 0x00000000 -#define EBAR_DRAM_CACHE_COHERENCY_WT 0x00001000 -#define EBAR_DRAM_CACHE_COHERENCY_WB 0x00002000 - -/* Device Bus Target interface */ -#define EBAR_DEVICE_DEVCS0 0x00001E00 -#define EBAR_DEVICE_DEVCS1 0x00001D00 -#define EBAR_DEVICE_DEVCS2 0x00001B00 -#define EBAR_DEVICE_DEVCS3 0x00001700 -#define EBAR_DEVICE_BOOTCS3 0x00000F00 - -/* PCI Target interface */ -#define EBAR_PCI_BYTE_SWAP 0x00000000 -#define EBAR_PCI_NO_SWAP 0x00000100 -#define EBAR_PCI_BYTE_WORD_SWAP 0x00000200 -#define EBAR_PCI_WORD_SWAP 0x00000300 -#define EBAR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000 -#define EBAR_PCI_NO_SNOOP_ASSERT 0x00000400 -#define EBAR_PCI_IO_SPACE 0x00000000 -#define EBAR_PCI_MEMORY_SPACE 0x00000800 -#define EBAR_PCI_REQ64_FORCE 0x00000000 -#define EBAR_PCI_REQ64_SIZE 0x00001000 - -/* Window access control */ -#define EWIN_ACCESS_NOT_ALLOWED 0 -#define EWIN_ACCESS_READ_ONLY 1 -#define EWIN_ACCESS_FULL ((1 << 1) | 1) - -/* structures represents Controller registers */ -struct kwgbe_barsz { - u32 bar; - u32 size; -}; - -struct kwgbe_rxcdp { - struct kwgbe_rxdesc *rxcdp; - u32 rxcdp_pad[3]; -}; - -struct kwgbe_tqx { - u32 qxttbc; - u32 tqxtbc; - u32 tqxac; - u32 tqxpad; -}; - -struct kwgbe_registers { - u32 phyadr; - u32 smi; - u32 euda; - u32 eudid; - u8 pad1[0x080 - 0x00c - 4]; - u32 euic; - u32 euim; - u8 pad2[0x094 - 0x084 - 4]; - u32 euea; - u32 euiae; - u8 pad3[0x0b0 - 0x098 - 4]; - u32 euc; - u8 pad3a[0x200 - 0x0b0 - 4]; - struct kwgbe_barsz barsz[6]; - u8 pad4[0x280 - 0x22c - 4]; - u32 ha_remap[4]; - u32 bare; - u32 epap; - u8 pad5[0x400 - 0x294 - 4]; - u32 pxc; - u32 pxcx; - u32 mii_ser_params; - u8 pad6[0x410 - 0x408 - 4]; - u32 evlane; - u32 macal; - u32 macah; - u32 sdc; - u32 dscp[7]; - u32 psc0; - u32 vpt2p; - u32 ps0; - u32 tqc; - u32 psc1; - u32 ps1; - u32 mrvl_header; - u8 pad7[0x460 - 0x454 - 4]; - u32 ic; - u32 ice; - u32 pim; - u32 peim; - u8 pad8[0x474 - 0x46c - 4]; - u32 pxtfut; - u32 pad9; - u32 pxmfs; - u32 pad10; - u32 pxdfc; - u32 pxofc; - u8 pad11[0x494 - 0x488 - 4]; - u32 peuiae; - u8 pad12[0x4bc - 0x494 - 4]; - u32 eth_type_prio; - u8 pad13[0x4dc - 0x4bc - 4]; - u32 tqfpc; - u32 pttbrc; - u32 tqc1; - u32 pmtu; - u32 pmtbs; - u8 pad14[0x60c - 0x4ec - 4]; - struct kwgbe_rxcdp rxcdp[7]; - struct kwgbe_rxdesc *rxcdp7; - u32 rqc; - struct kwgbe_txdesc *tcsdp; - u8 pad15[0x6c0 - 0x684 - 4]; - struct kwgbe_txdesc *tcqdp[8]; - u8 pad16[0x700 - 0x6dc - 4]; - struct kwgbe_tqx tqx[8]; - u32 pttbc; - u8 pad17[0x7a8 - 0x780 - 4]; - u32 tqxipg0; - u32 pad18[3]; - u32 tqxipg1; - u8 pad19[0x7c0 - 0x7b8 - 4]; - u32 hitkninlopkt; - u32 hitkninasyncpkt; - u32 lotkninasyncpkt; - u32 pad20; - u32 ts; - u8 pad21[0x3000 - 0x27d0 - 4]; - u32 pad20_1[32]; /* mib counter registes */ - u8 pad22[0x3400 - 0x3000 - sizeof(u32) * 32]; - u32 dfsmt[64]; - u32 dfomt[64]; - u32 dfut[4]; - u8 pad23[0xe20c0 - 0x7360c - 4]; - u32 pmbus_top_arbiter; -}; - -/* structures/enums needed by driver */ -enum kwgbe_adrwin { - KWGBE_WIN0, - KWGBE_WIN1, - KWGBE_WIN2, - KWGBE_WIN3, - KWGBE_WIN4, - KWGBE_WIN5 -}; - -enum kwgbe_target { - KWGBE_TARGET_DRAM, - KWGBE_TARGET_DEV, - KWGBE_TARGET_CBS, - KWGBE_TARGET_PCI0, - KWGBE_TARGET_PCI1 -}; - -struct kwgbe_winparam { - enum kwgbe_adrwin win; /* Window number */ - enum kwgbe_target target; /* System targets */ - u16 attrib; /* BAR attrib. See above macros */ - u32 base_addr; /* Window base address in u32 form */ - u32 high_addr; /* Window high address in u32 form */ - u32 size; /* Size in MBytes. Must be % 64Kbyte. */ - int enable; /* Enable/disable access to the window. */ - u16 access_ctrl; /*Access ctrl register. see above macros */ -}; - -struct kwgbe_rxdesc { - u32 cmd_sts; /* Descriptor command status */ - u16 buf_size; /* Buffer size */ - u16 byte_cnt; /* Descriptor buffer byte count */ - u8 *buf_ptr; /* Descriptor buffer pointer */ - struct kwgbe_rxdesc *nxtdesc_p; /* Next descriptor pointer */ -}; - -struct kwgbe_txdesc { - u32 cmd_sts; /* Descriptor command status */ - u16 l4i_chk; /* CPU provided TCP Checksum */ - u16 byte_cnt; /* Descriptor buffer byte count */ - u8 *buf_ptr; /* Descriptor buffer ptr */ - struct kwgbe_txdesc *nxtdesc_p; /* Next descriptor ptr */ -}; - -/* port device data struct */ -struct kwgbe_device { - struct eth_device dev; - struct kwgbe_registers *regs; - struct kwgbe_txdesc *p_txdesc; - struct kwgbe_rxdesc *p_rxdesc; - struct kwgbe_rxdesc *p_rxdesc_curr; - u8 *p_rxbuf; - u8 *p_aligned_txbuf; -}; - -#endif /* __EGIGA_H__ */ diff --git a/drivers/net/macb.c b/drivers/net/macb.c index dcb8850..6a58a37 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -439,8 +439,6 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) { struct macb_device *macb = to_macb(netdev); unsigned long paddr; - u32 hwaddr_bottom; - u16 hwaddr_top; int i; /* @@ -469,12 +467,6 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) macb_writel(macb, RBQP, macb->rx_ring_dma); macb_writel(macb, TBQP, macb->tx_ring_dma); - /* set hardware address */ - hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr)); - macb_writel(macb, SA1B, hwaddr_bottom); - hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))); - macb_writel(macb, SA1T, hwaddr_top); - /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ @@ -521,6 +513,20 @@ static void macb_halt(struct eth_device *netdev) macb_writel(macb, NCR, MACB_BIT(CLRSTAT)); } +static int macb_write_hwaddr(struct eth_device *dev) +{ + struct macb_device *macb = to_macb(dev); + u32 hwaddr_bottom; + u16 hwaddr_top; + + /* set hardware address */ + hwaddr_bottom = cpu_to_le32(*((u32 *)dev->enetaddr)); + macb_writel(macb, SA1B, hwaddr_bottom); + hwaddr_top = cpu_to_le16(*((u16 *)(dev->enetaddr + 4))); + macb_writel(macb, SA1T, hwaddr_top); + return 0; +} + int macb_eth_initialize(int id, void *regs, unsigned int phy_addr) { struct macb_device *macb; @@ -554,6 +560,7 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr) netdev->halt = macb_halt; netdev->send = macb_send; netdev->recv = macb_recv; + netdev->write_hwaddr = macb_write_hwaddr; /* * Do some basic initialization so that we at least can talk diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/mvgbe.c index 932792e..cad4023 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/mvgbe.c @@ -35,11 +35,19 @@ #include <asm/errno.h> #include <asm/types.h> #include <asm/byteorder.h> + +#if defined(CONFIG_KIRKWOOD) #include <asm/arch/kirkwood.h> -#include "kirkwood_egiga.h" +#elif defined(CONFIG_ORION5X) +#include <asm/arch/orion5x.h> +#endif + +#include "mvgbe.h" -#define KIRKWOOD_PHY_ADR_REQUEST 0xee -#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi) +DECLARE_GLOBAL_DATA_PTR; + +#define MV_PHY_ADR_REQUEST 0xee +#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi) /* * smi_reg_read - miiphy_read callback function. @@ -49,16 +57,16 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) { struct eth_device *dev = eth_get_dev_by_name(devname); - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_registers *regs = dmvgbe->regs; u32 smi_reg; u32 timeout; /* Phyadr read request */ - if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST && - reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) { + if (phy_adr == MV_PHY_ADR_REQUEST && + reg_ofs == MV_PHY_ADR_REQUEST) { /* */ - *data = (u16) (KWGBEREG_RD(regs->phyadr) & PHYADR_MASK); + *data = (u16) (MVGBE_REG_RD(regs->phyadr) & PHYADR_MASK); return 0; } /* check parameters */ @@ -73,42 +81,43 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) return -EFAULT; } - timeout = KWGBE_PHY_SMI_TIMEOUT; + timeout = MVGBE_PHY_SMI_TIMEOUT; /* wait till the SMI is not busy */ do { /* read smi register */ - smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); + smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI busy timeout\n", __FUNCTION__); return -EFAULT; } - } while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK); + } while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK); /* fill the phy address and regiser offset and read opcode */ - smi_reg = (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS) - | (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS) - | KWGBE_PHY_SMI_OPCODE_READ; + smi_reg = (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS) + | (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS) + | MVGBE_PHY_SMI_OPCODE_READ; /* write the smi register */ - KWGBEREG_WR(KWGBE_SMI_REG, smi_reg); + MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg); /*wait till read value is ready */ - timeout = KWGBE_PHY_SMI_TIMEOUT; + timeout = MVGBE_PHY_SMI_TIMEOUT; do { /* read smi register */ - smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); + smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI read ready timeout\n", __FUNCTION__); return -EFAULT; } - } while (!(smi_reg & KWGBE_PHY_SMI_READ_VALID_MASK)); + } while (!(smi_reg & MVGBE_PHY_SMI_READ_VALID_MASK)); /* Wait for the data to update in the SMI register */ - for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ; + for (timeout = 0; timeout < MVGBE_PHY_SMI_TIMEOUT; timeout++) + ; - *data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK); + *data = (u16) (MVGBE_REG_RD(MVGBE_SMI_REG) & MVGBE_PHY_SMI_DATA_MASK); debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr, reg_ofs, *data); @@ -125,15 +134,15 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data) { struct eth_device *dev = eth_get_dev_by_name(devname); - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_registers *regs = dmvgbe->regs; u32 smi_reg; u32 timeout; /* Phyadr write request*/ - if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST && - reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) { - KWGBEREG_WR(regs->phyadr, data); + if (phy_adr == MV_PHY_ADR_REQUEST && + reg_ofs == MV_PHY_ADR_REQUEST) { + MVGBE_REG_WR(regs->phyadr, data); return 0; } @@ -148,24 +157,24 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data) } /* wait till the SMI is not busy */ - timeout = KWGBE_PHY_SMI_TIMEOUT; + timeout = MVGBE_PHY_SMI_TIMEOUT; do { /* read smi register */ - smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); + smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI busy timeout\n", __FUNCTION__); return -ETIME; } - } while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK); + } while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK); /* fill the phy addr and reg offset and write opcode and data */ - smi_reg = (data << KWGBE_PHY_SMI_DATA_OFFS); - smi_reg |= (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS) - | (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS); - smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ; + smi_reg = (data << MVGBE_PHY_SMI_DATA_OFFS); + smi_reg |= (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS) + | (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS); + smi_reg &= ~MVGBE_PHY_SMI_OPCODE_READ; /* write the smi register */ - KWGBEREG_WR(KWGBE_SMI_REG, smi_reg); + MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg); return 0; } @@ -202,52 +211,52 @@ static void stop_queue(u32 * qreg) * @regs Register struct pointer. * @param Address decode parameter struct. */ -static void set_access_control(struct kwgbe_registers *regs, - struct kwgbe_winparam *param) +static void set_access_control(struct mvgbe_registers *regs, + struct mvgbe_winparam *param) { u32 access_prot_reg; /* Set access control register */ - access_prot_reg = KWGBEREG_RD(regs->epap); + access_prot_reg = MVGBE_REG_RD(regs->epap); /* clear window permission */ access_prot_reg &= (~(3 << (param->win * 2))); access_prot_reg |= (param->access_ctrl << (param->win * 2)); - KWGBEREG_WR(regs->epap, access_prot_reg); + MVGBE_REG_WR(regs->epap, access_prot_reg); /* Set window Size reg (SR) */ - KWGBEREG_WR(regs->barsz[param->win].size, + MVGBE_REG_WR(regs->barsz[param->win].size, (((param->size / 0x10000) - 1) << 16)); /* Set window Base address reg (BA) */ - KWGBEREG_WR(regs->barsz[param->win].bar, + MVGBE_REG_WR(regs->barsz[param->win].bar, (param->target | param->attrib | param->base_addr)); /* High address remap reg (HARR) */ if (param->win < 4) - KWGBEREG_WR(regs->ha_remap[param->win], param->high_addr); + MVGBE_REG_WR(regs->ha_remap[param->win], param->high_addr); /* Base address enable reg (BARER) */ if (param->enable == 1) - KWGBEREG_BITS_RESET(regs->bare, (1 << param->win)); + MVGBE_REG_BITS_RESET(regs->bare, (1 << param->win)); else - KWGBEREG_BITS_SET(regs->bare, (1 << param->win)); + MVGBE_REG_BITS_SET(regs->bare, (1 << param->win)); } -static void set_dram_access(struct kwgbe_registers *regs) +static void set_dram_access(struct mvgbe_registers *regs) { - struct kwgbe_winparam win_param; + struct mvgbe_winparam win_param; int i; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { /* Set access parameters for DRAM bank i */ win_param.win = i; /* Use Ethernet window i */ /* Window target - DDR */ - win_param.target = KWGBE_TARGET_DRAM; + win_param.target = MVGBE_TARGET_DRAM; /* Enable full access */ win_param.access_ctrl = EWIN_ACCESS_FULL; win_param.high_addr = 0; - /* Get bank base */ - win_param.base_addr = kw_sdram_bar(i); - win_param.size = kw_sdram_bs(i); /* Get bank size */ + /* Get bank base and size */ + win_param.base_addr = gd->bd->bi_dram[i].start; + win_param.size = gd->bd->bi_dram[i].size; if (win_param.size == 0) win_param.enable = 0; else @@ -268,7 +277,7 @@ static void set_dram_access(struct kwgbe_registers *regs) win_param.attrib = EBAR_DRAM_CS3; break; default: - /* invalide bank, disable access */ + /* invalid bank, disable access */ win_param.enable = 0; win_param.attrib = 0; break; @@ -284,19 +293,19 @@ static void set_dram_access(struct kwgbe_registers *regs) * Go through all the DA filter tables (Unicast, Special Multicast & Other * Multicast) and set each entry to 0. */ -static void port_init_mac_tables(struct kwgbe_registers *regs) +static void port_init_mac_tables(struct mvgbe_registers *regs) { int table_index; /* Clear DA filter unicast table (Ex_dFUT) */ for (table_index = 0; table_index < 4; ++table_index) - KWGBEREG_WR(regs->dfut[table_index], 0); + MVGBE_REG_WR(regs->dfut[table_index], 0); for (table_index = 0; table_index < 64; ++table_index) { /* Clear DA filter special multicast table (Ex_dFSMT) */ - KWGBEREG_WR(regs->dfsmt[table_index], 0); + MVGBE_REG_WR(regs->dfsmt[table_index], 0); /* Clear DA filter other multicast table (Ex_dFOMT) */ - KWGBEREG_WR(regs->dfomt[table_index], 0); + MVGBE_REG_WR(regs->dfomt[table_index], 0); } } @@ -314,7 +323,7 @@ static void port_init_mac_tables(struct kwgbe_registers *regs) * * RETURN: 1 if output succeeded. 0 if option parameter is invalid. */ -static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble, +static int port_uc_addr(struct mvgbe_registers *regs, u8 uc_nibble, int option) { u32 unicast_reg; @@ -334,16 +343,16 @@ static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble, * Clear accepts frame bit at specified unicast * DA table entry */ - unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]); + unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]); unicast_reg &= (0xFF << (8 * reg_offset)); - KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg); + MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg); break; case ACCEPT_MAC_ADDR: /* Set accepts frame bit at unicast DA filter table entry */ - unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]); + unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]); unicast_reg &= (0xFF << (8 * reg_offset)); unicast_reg |= ((0x01 | (RXUQ << 1)) << (8 * reg_offset)); - KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg); + MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg); break; default: return 0; @@ -354,7 +363,7 @@ static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble, /* * port_uc_addr_set - This function Set the port Unicast address. */ -static void port_uc_addr_set(struct kwgbe_registers *regs, u8 * p_addr) +static void port_uc_addr_set(struct mvgbe_registers *regs, u8 * p_addr) { u32 mac_h; u32 mac_l; @@ -363,92 +372,95 @@ static void port_uc_addr_set(struct kwgbe_registers *regs, u8 * p_addr) mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) | (p_addr[3] << 0); - KWGBEREG_WR(regs->macal, mac_l); - KWGBEREG_WR(regs->macah, mac_h); + MVGBE_REG_WR(regs->macal, mac_l); + MVGBE_REG_WR(regs->macah, mac_h); /* Accept frames of this address */ port_uc_addr(regs, p_addr[5], ACCEPT_MAC_ADDR); } /* - * kwgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. + * mvgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. */ -static void kwgbe_init_rx_desc_ring(struct kwgbe_device *dkwgbe) +static void mvgbe_init_rx_desc_ring(struct mvgbe_device *dmvgbe) { - struct kwgbe_rxdesc *p_rx_desc; + struct mvgbe_rxdesc *p_rx_desc; int i; /* initialize the Rx descriptors ring */ - p_rx_desc = dkwgbe->p_rxdesc; + p_rx_desc = dmvgbe->p_rxdesc; for (i = 0; i < RINGSZ; i++) { p_rx_desc->cmd_sts = - KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT; + MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT; p_rx_desc->buf_size = PKTSIZE_ALIGN; p_rx_desc->byte_cnt = 0; - p_rx_desc->buf_ptr = dkwgbe->p_rxbuf + i * PKTSIZE_ALIGN; + p_rx_desc->buf_ptr = dmvgbe->p_rxbuf + i * PKTSIZE_ALIGN; if (i == (RINGSZ - 1)) - p_rx_desc->nxtdesc_p = dkwgbe->p_rxdesc; + p_rx_desc->nxtdesc_p = dmvgbe->p_rxdesc; else { - p_rx_desc->nxtdesc_p = (struct kwgbe_rxdesc *) - ((u32) p_rx_desc + KW_RXQ_DESC_ALIGNED_SIZE); + p_rx_desc->nxtdesc_p = (struct mvgbe_rxdesc *) + ((u32) p_rx_desc + MV_RXQ_DESC_ALIGNED_SIZE); p_rx_desc = p_rx_desc->nxtdesc_p; } } - dkwgbe->p_rxdesc_curr = dkwgbe->p_rxdesc; + dmvgbe->p_rxdesc_curr = dmvgbe->p_rxdesc; } -static int kwgbe_init(struct eth_device *dev) +static int mvgbe_init(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_registers *regs = dmvgbe->regs; #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) int i; #endif /* setup RX rings */ - kwgbe_init_rx_desc_ring(dkwgbe); + mvgbe_init_rx_desc_ring(dmvgbe); /* Clear the ethernet port interrupts */ - KWGBEREG_WR(regs->ic, 0); - KWGBEREG_WR(regs->ice, 0); + MVGBE_REG_WR(regs->ic, 0); + MVGBE_REG_WR(regs->ice, 0); /* Unmask RX buffer and TX end interrupt */ - KWGBEREG_WR(regs->pim, INT_CAUSE_UNMASK_ALL); + MVGBE_REG_WR(regs->pim, INT_CAUSE_UNMASK_ALL); /* Unmask phy and link status changes interrupts */ - KWGBEREG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT); + MVGBE_REG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT); set_dram_access(regs); port_init_mac_tables(regs); - port_uc_addr_set(regs, dkwgbe->dev.enetaddr); + port_uc_addr_set(regs, dmvgbe->dev.enetaddr); /* Assign port configuration and command. */ - KWGBEREG_WR(regs->pxc, PRT_CFG_VAL); - KWGBEREG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE); - KWGBEREG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE); + MVGBE_REG_WR(regs->pxc, PRT_CFG_VAL); + MVGBE_REG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE); + MVGBE_REG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE); /* Assign port SDMA configuration */ - KWGBEREG_WR(regs->sdc, PORT_SDMA_CFG_VALUE); - KWGBEREG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL); - KWGBEREG_WR(regs->tqx[0].tqxtbc, (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL); + MVGBE_REG_WR(regs->sdc, PORT_SDMA_CFG_VALUE); + MVGBE_REG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL); + MVGBE_REG_WR(regs->tqx[0].tqxtbc, + (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL); /* Turn off the port/RXUQ bandwidth limitation */ - KWGBEREG_WR(regs->pmtu, 0); + MVGBE_REG_WR(regs->pmtu, 0); /* Set maximum receive buffer to 9700 bytes */ - KWGBEREG_WR(regs->psc0, KWGBE_MAX_RX_PACKET_9700BYTE - | (KWGBEREG_RD(regs->psc0) & MRU_MASK)); + MVGBE_REG_WR(regs->psc0, MVGBE_MAX_RX_PACKET_9700BYTE + | (MVGBE_REG_RD(regs->psc0) & MRU_MASK)); /* Enable port initially */ - KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN); + MVGBE_REG_BITS_SET(regs->psc0, MVGBE_SERIAL_PORT_EN); /* * Set ethernet MTU for leaky bucket mechanism to 0 - this will * disable the leaky bucket mechanism . */ - KWGBEREG_WR(regs->pmtu, 0); + MVGBE_REG_WR(regs->pmtu, 0); /* Assignment of Rx CRDB of given RXUQ */ - KWGBEREG_WR(regs->rxcdp[RXUQ], (u32) dkwgbe->p_rxdesc_curr); + MVGBE_REG_WR(regs->rxcdp[RXUQ], (u32) dmvgbe->p_rxdesc_curr); + /* ensure previous write is done before enabling Rx DMA */ + isb(); /* Enable port Rx. */ - KWGBEREG_WR(regs->rqc, (1 << RXUQ)); + MVGBE_REG_WR(regs->rqc, (1 << RXUQ)); #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) @@ -456,8 +468,8 @@ static int kwgbe_init(struct eth_device *dev) for (i = 0; i < 5; i++) { u16 phyadr; - miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, &phyadr); + miiphy_read(dev->name, MV_PHY_ADR_REQUEST, + MV_PHY_ADR_REQUEST, &phyadr); /* Return if we get link up */ if (miiphy_link(dev->name, phyadr)) return 0; @@ -470,50 +482,50 @@ static int kwgbe_init(struct eth_device *dev) return 0; } -static int kwgbe_halt(struct eth_device *dev) +static int mvgbe_halt(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_registers *regs = dmvgbe->regs; /* Disable all gigE address decoder */ - KWGBEREG_WR(regs->bare, 0x3f); + MVGBE_REG_WR(regs->bare, 0x3f); stop_queue(®s->tqc); stop_queue(®s->rqc); /* Disable port */ - KWGBEREG_BITS_RESET(regs->psc0, KWGBE_SERIAL_PORT_EN); + MVGBE_REG_BITS_RESET(regs->psc0, MVGBE_SERIAL_PORT_EN); /* Set port is not reset */ - KWGBEREG_BITS_RESET(regs->psc1, 1 << 4); + MVGBE_REG_BITS_RESET(regs->psc1, 1 << 4); #ifdef CONFIG_SYS_MII_MODE /* Set MMI interface up */ - KWGBEREG_BITS_RESET(regs->psc1, 1 << 3); + MVGBE_REG_BITS_RESET(regs->psc1, 1 << 3); #endif /* Disable & mask ethernet port interrupts */ - KWGBEREG_WR(regs->ic, 0); - KWGBEREG_WR(regs->ice, 0); - KWGBEREG_WR(regs->pim, 0); - KWGBEREG_WR(regs->peim, 0); + MVGBE_REG_WR(regs->ic, 0); + MVGBE_REG_WR(regs->ice, 0); + MVGBE_REG_WR(regs->pim, 0); + MVGBE_REG_WR(regs->peim, 0); return 0; } -static int kwgbe_write_hwaddr(struct eth_device *dev) +static int mvgbe_write_hwaddr(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_registers *regs = dmvgbe->regs; /* Programs net device MAC address after initialization */ - port_uc_addr_set(regs, dkwgbe->dev.enetaddr); + port_uc_addr_set(regs, dmvgbe->dev.enetaddr); return 0; } -static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, +static int mvgbe_send(struct eth_device *dev, void *dataptr, int datasize) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_registers *regs = dkwgbe->regs; - struct kwgbe_txdesc *p_txdesc = dkwgbe->p_txdesc; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_registers *regs = dmvgbe->regs; + struct mvgbe_txdesc *p_txdesc = dmvgbe->p_txdesc; void *p = (void *)dataptr; u32 cmd_sts; @@ -525,30 +537,35 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, return -1; } - memcpy(dkwgbe->p_aligned_txbuf, p, datasize); - p = dkwgbe->p_aligned_txbuf; + memcpy(dmvgbe->p_aligned_txbuf, p, datasize); + p = dmvgbe->p_aligned_txbuf; } - p_txdesc->cmd_sts = KWGBE_ZERO_PADDING | KWGBE_GEN_CRC; - p_txdesc->cmd_sts |= KWGBE_TX_FIRST_DESC | KWGBE_TX_LAST_DESC; - p_txdesc->cmd_sts |= KWGBE_BUFFER_OWNED_BY_DMA; - p_txdesc->cmd_sts |= KWGBE_TX_EN_INTERRUPT; + p_txdesc->cmd_sts = MVGBE_ZERO_PADDING | MVGBE_GEN_CRC; + p_txdesc->cmd_sts |= MVGBE_TX_FIRST_DESC | MVGBE_TX_LAST_DESC; + p_txdesc->cmd_sts |= MVGBE_BUFFER_OWNED_BY_DMA; + p_txdesc->cmd_sts |= MVGBE_TX_EN_INTERRUPT; p_txdesc->buf_ptr = (u8 *) p; p_txdesc->byte_cnt = datasize; + /* Set this tc desc as zeroth TXUQ */ + MVGBE_REG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc); + + /* ensure tx desc writes above are performed before we start Tx DMA */ + isb(); + /* Apply send command using zeroth TXUQ */ - KWGBEREG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc); - KWGBEREG_WR(regs->tqc, (1 << TXUQ)); + MVGBE_REG_WR(regs->tqc, (1 << TXUQ)); /* * wait for packet xmit completion */ cmd_sts = readl(&p_txdesc->cmd_sts); - while (cmd_sts & KWGBE_BUFFER_OWNED_BY_DMA) { + while (cmd_sts & MVGBE_BUFFER_OWNED_BY_DMA) { /* return fail if error is detected */ - if ((cmd_sts & (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME)) == - (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME) && - cmd_sts & (KWGBE_UR_ERROR | KWGBE_RL_ERROR)) { + if ((cmd_sts & (MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME)) == + (MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME) && + cmd_sts & (MVGBE_UR_ERROR | MVGBE_RL_ERROR)) { printf("Err..(%s) in xmit packet\n", __FUNCTION__); return -1; } @@ -557,22 +574,22 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, return 0; } -static int kwgbe_recv(struct eth_device *dev) +static int mvgbe_recv(struct eth_device *dev) { - struct kwgbe_device *dkwgbe = to_dkwgbe(dev); - struct kwgbe_rxdesc *p_rxdesc_curr = dkwgbe->p_rxdesc_curr; + struct mvgbe_device *dmvgbe = to_mvgbe(dev); + struct mvgbe_rxdesc *p_rxdesc_curr = dmvgbe->p_rxdesc_curr; u32 cmd_sts; u32 timeout = 0; /* wait untill rx packet available or timeout */ do { - if (timeout < KWGBE_PHY_SMI_TIMEOUT) + if (timeout < MVGBE_PHY_SMI_TIMEOUT) timeout++; else { debug("%s time out...\n", __FUNCTION__); return -1; } - } while (readl(&p_rxdesc_curr->cmd_sts) & KWGBE_BUFFER_OWNED_BY_DMA); + } while (readl(&p_rxdesc_curr->cmd_sts) & MVGBE_BUFFER_OWNED_BY_DMA); if (p_rxdesc_curr->byte_cnt != 0) { debug("%s: Received %d byte Packet @ 0x%x (cmd_sts= %08x)\n", @@ -589,13 +606,13 @@ static int kwgbe_recv(struct eth_device *dev) cmd_sts = readl(&p_rxdesc_curr->cmd_sts); if ((cmd_sts & - (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC)) - != (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC)) { + (MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC)) + != (MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC)) { printf("Err..(%s) Dropping packet spread on" " multiple descriptors\n", __FUNCTION__); - } else if (cmd_sts & KWGBE_ERROR_SUMMARY) { + } else if (cmd_sts & MVGBE_ERROR_SUMMARY) { printf("Err..(%s) Dropping packet with errors\n", __FUNCTION__); @@ -613,62 +630,72 @@ static int kwgbe_recv(struct eth_device *dev) * free these descriptors and point next in the ring */ p_rxdesc_curr->cmd_sts = - KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT; + MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT; p_rxdesc_curr->buf_size = PKTSIZE_ALIGN; p_rxdesc_curr->byte_cnt = 0; - writel((unsigned)p_rxdesc_curr->nxtdesc_p, (u32) &dkwgbe->p_rxdesc_curr); + writel((unsigned)p_rxdesc_curr->nxtdesc_p, + (u32) &dmvgbe->p_rxdesc_curr); return 0; } -int kirkwood_egiga_initialize(bd_t * bis) +int mvgbe_initialize(bd_t *bis) { - struct kwgbe_device *dkwgbe; + struct mvgbe_device *dmvgbe; struct eth_device *dev; int devnum; char *s; - u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS; + u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; - for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) { + for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) { /*skip if port is configured not to use */ if (used_ports[devnum] == 0) continue; - if (!(dkwgbe = malloc(sizeof(struct kwgbe_device)))) + dmvgbe = malloc(sizeof(struct mvgbe_device)); + + if (!dmvgbe) goto error1; - memset(dkwgbe, 0, sizeof(struct kwgbe_device)); + memset(dmvgbe, 0, sizeof(struct mvgbe_device)); + + dmvgbe->p_rxdesc = + (struct mvgbe_rxdesc *)memalign(PKTALIGN, + MV_RXQ_DESC_ALIGNED_SIZE*RINGSZ + 1); - if (!(dkwgbe->p_rxdesc = - (struct kwgbe_rxdesc *)memalign(PKTALIGN, - KW_RXQ_DESC_ALIGNED_SIZE - * RINGSZ + 1))) + if (!dmvgbe->p_rxdesc) goto error2; - if (!(dkwgbe->p_rxbuf = (u8 *) memalign(PKTALIGN, RINGSZ - * PKTSIZE_ALIGN + 1))) + dmvgbe->p_rxbuf = (u8 *) memalign(PKTALIGN, + RINGSZ*PKTSIZE_ALIGN + 1); + + if (!dmvgbe->p_rxbuf) goto error3; - if (!(dkwgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN))) + dmvgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN); + + if (!dmvgbe->p_aligned_txbuf) goto error4; - if (!(dkwgbe->p_txdesc = (struct kwgbe_txdesc *) - memalign(PKTALIGN, sizeof(struct kwgbe_txdesc) + 1))) { - free(dkwgbe->p_aligned_txbuf); - error4: - free(dkwgbe->p_rxbuf); - error3: - free(dkwgbe->p_rxdesc); - error2: - free(dkwgbe); - error1: + dmvgbe->p_txdesc = (struct mvgbe_txdesc *) memalign( + PKTALIGN, sizeof(struct mvgbe_txdesc) + 1); + + if (!dmvgbe->p_txdesc) { + free(dmvgbe->p_aligned_txbuf); +error4: + free(dmvgbe->p_rxbuf); +error3: + free(dmvgbe->p_rxdesc); +error2: + free(dmvgbe); +error1: printf("Err.. %s Failed to allocate memory\n", __FUNCTION__); return -1; } - dev = &dkwgbe->dev; + dev = &dmvgbe->dev; /* must be less than NAMESIZE (16) */ sprintf(dev->name, "egiga%d", devnum); @@ -676,13 +703,15 @@ int kirkwood_egiga_initialize(bd_t * bis) /* Extract the MAC address from the environment */ switch (devnum) { case 0: - dkwgbe->regs = (void *)KW_EGIGA0_BASE; + dmvgbe->regs = (void *)MVGBE0_BASE; s = "ethaddr"; break; +#if defined(MVGBE1_BASE) case 1: - dkwgbe->regs = (void *)KW_EGIGA1_BASE; + dmvgbe->regs = (void *)MVGBE1_BASE; s = "eth1addr"; break; +#endif default: /* this should never happen */ printf("Err..(%s) Invalid device number %d\n", __FUNCTION__, devnum); @@ -690,29 +719,37 @@ int kirkwood_egiga_initialize(bd_t * bis) } while (!eth_getenv_enetaddr(s, dev->enetaddr)) { - /* Generate Random Private MAC addr if not set */ + /* Generate Private MAC addr if not set */ dev->enetaddr[0] = 0x02; dev->enetaddr[1] = 0x50; dev->enetaddr[2] = 0x43; +#if defined (CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION) + /* Generate fixed lower MAC half using devnum */ + dev->enetaddr[3] = 0; + dev->enetaddr[4] = 0; + dev->enetaddr[5] = devnum; +#else + /* Generate random lower MAC half */ dev->enetaddr[3] = get_random_hex(); dev->enetaddr[4] = get_random_hex(); dev->enetaddr[5] = get_random_hex(); +#endif eth_setenv_enetaddr(s, dev->enetaddr); } - dev->init = (void *)kwgbe_init; - dev->halt = (void *)kwgbe_halt; - dev->send = (void *)kwgbe_send; - dev->recv = (void *)kwgbe_recv; - dev->write_hwaddr = (void *)kwgbe_write_hwaddr; + dev->init = (void *)mvgbe_init; + dev->halt = (void *)mvgbe_halt; + dev->send = (void *)mvgbe_send; + dev->recv = (void *)mvgbe_recv; + dev->write_hwaddr = (void *)mvgbe_write_hwaddr; eth_register(dev); #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, smi_reg_read, smi_reg_write); /* Set phy address of the port */ - miiphy_write(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); + miiphy_write(dev->name, MV_PHY_ADR_REQUEST, + MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); #endif } return 0; diff --git a/drivers/net/mvgbe.h b/drivers/net/mvgbe.h new file mode 100644 index 0000000..3de98d0 --- /dev/null +++ b/drivers/net/mvgbe.h @@ -0,0 +1,505 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * based on - Driver for MV64360X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __MVGBE_H__ +#define __MVGBE_H__ + +/* PHY_BASE_ADR is board specific and can be configured */ +#if defined (CONFIG_PHY_BASE_ADR) +#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR +#else +#define PHY_BASE_ADR 0x08 /* default phy base addr */ +#endif + +/* Constants */ +#define INT_CAUSE_UNMASK_ALL 0x0007ffff +#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff +#define MRU_MASK 0xfff1ffff +#define PHYADR_MASK 0x0000001f +#define PHYREG_MASK 0x0000001f +#define QTKNBKT_DEF_VAL 0x3fffffff +#define QMTBS_DEF_VAL 0x000003ff +#define QTKNRT_DEF_VAL 0x0000fcff +#define RXUQ 0 /* Used Rx queue */ +#define TXUQ 0 /* Used Rx queue */ + +#define to_mvgbe(_d) container_of(_d, struct mvgbe_device, dev) +#define MVGBE_REG_WR(adr, val) writel(val, &adr) +#define MVGBE_REG_RD(adr) readl(&adr) +#define MVGBE_REG_BITS_RESET(adr, val) writel(readl(&adr) & ~(val), &adr) +#define MVGBE_REG_BITS_SET(adr, val) writel(readl(&adr) | val, &adr) + +/* Default port configuration value */ +#define PRT_CFG_VAL ( \ + MVGBE_UCAST_MOD_NRML | \ + MVGBE_DFLT_RXQ(RXUQ) | \ + MVGBE_DFLT_RX_ARPQ(RXUQ) | \ + MVGBE_RX_BC_IF_NOT_IP_OR_ARP | \ + MVGBE_RX_BC_IF_IP | \ + MVGBE_RX_BC_IF_ARP | \ + MVGBE_CPTR_TCP_FRMS_DIS | \ + MVGBE_CPTR_UDP_FRMS_DIS | \ + MVGBE_DFLT_RX_TCPQ(RXUQ) | \ + MVGBE_DFLT_RX_UDPQ(RXUQ) | \ + MVGBE_DFLT_RX_BPDUQ(RXUQ)) + +/* Default port extend configuration value */ +#define PORT_CFG_EXTEND_VALUE \ + MVGBE_SPAN_BPDU_PACKETS_AS_NORMAL | \ + MVGBE_PARTITION_DIS | \ + MVGBE_TX_CRC_GENERATION_EN + +#define GT_MVGBE_IPG_INT_RX(value) ((value & 0x3fff) << 8) + +/* Default sdma control value */ +#define PORT_SDMA_CFG_VALUE ( \ + MVGBE_RX_BURST_SIZE_16_64BIT | \ + MVGBE_BLM_RX_NO_SWAP | \ + MVGBE_BLM_TX_NO_SWAP | \ + GT_MVGBE_IPG_INT_RX(RXUQ) | \ + MVGBE_TX_BURST_SIZE_16_64BIT) + +/* Default port serial control value */ +#define PORT_SERIAL_CONTROL_VALUE ( \ + MVGBE_FORCE_LINK_PASS | \ + MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ + MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MVGBE_ADV_NO_FLOW_CTRL | \ + MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MVGBE_FORCE_BP_MODE_NO_JAM | \ + (1 << 9) /* Reserved bit has to be 1 */ | \ + MVGBE_DO_NOT_FORCE_LINK_FAIL | \ + MVGBE_EN_AUTO_NEG_SPEED_GMII | \ + MVGBE_DTE_ADV_0 | \ + MVGBE_MIIPHY_MAC_MODE | \ + MVGBE_AUTO_NEG_NO_CHANGE | \ + MVGBE_MAX_RX_PACKET_1552BYTE | \ + MVGBE_CLR_EXT_LOOPBACK | \ + MVGBE_SET_FULL_DUPLEX_MODE | \ + MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX) + +/* Tx WRR confoguration macros */ +#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */ +#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_FFFF /* PMTBS reg (default) */ +#define PORT_TOKEN_RATE 1023 /* PTTBRC reg (default) */ +/* MAC accepet/reject macros */ +#define ACCEPT_MAC_ADDR 0 +#define REJECT_MAC_ADDR 1 +/* Size of a Tx/Rx descriptor used in chain list data structure */ +#define MV_RXQ_DESC_ALIGNED_SIZE \ + (((sizeof(struct mvgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN) +/* Buffer offset from buffer pointer */ +#define RX_BUF_OFFSET 0x2 + +/* Port serial status reg (PSR) */ +#define MVGBE_INTERFACE_GMII_MII 0 +#define MVGBE_INTERFACE_PCM 1 +#define MVGBE_LINK_IS_DOWN 0 +#define MVGBE_LINK_IS_UP (1 << 1) +#define MVGBE_PORT_AT_HALF_DUPLEX 0 +#define MVGBE_PORT_AT_FULL_DUPLEX (1 << 2) +#define MVGBE_RX_FLOW_CTRL_DISD 0 +#define MVGBE_RX_FLOW_CTRL_ENBALED (1 << 3) +#define MVGBE_GMII_SPEED_100_10 0 +#define MVGBE_GMII_SPEED_1000 (1 << 4) +#define MVGBE_MII_SPEED_10 0 +#define MVGBE_MII_SPEED_100 (1 << 5) +#define MVGBE_NO_TX 0 +#define MVGBE_TX_IN_PROGRESS (1 << 7) +#define MVGBE_BYPASS_NO_ACTIVE 0 +#define MVGBE_BYPASS_ACTIVE (1 << 8) +#define MVGBE_PORT_NOT_AT_PARTN_STT 0 +#define MVGBE_PORT_AT_PARTN_STT (1 << 9) +#define MVGBE_PORT_TX_FIFO_NOT_EMPTY 0 +#define MVGBE_PORT_TX_FIFO_EMPTY (1 << 10) + +/* These macros describes the Port configuration reg (Px_cR) bits */ +#define MVGBE_UCAST_MOD_NRML 0 +#define MVGBE_UNICAST_PROMISCUOUS_MODE 1 +#define MVGBE_DFLT_RXQ(_x) (_x << 1) +#define MVGBE_DFLT_RX_ARPQ(_x) (_x << 4) +#define MVGBE_RX_BC_IF_NOT_IP_OR_ARP 0 +#define MVGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7) +#define MVGBE_RX_BC_IF_IP 0 +#define MVGBE_REJECT_BC_IF_IP (1 << 8) +#define MVGBE_RX_BC_IF_ARP 0 +#define MVGBE_REJECT_BC_IF_ARP (1 << 9) +#define MVGBE_TX_AM_NO_UPDATE_ERR_SMRY (1 << 12) +#define MVGBE_CPTR_TCP_FRMS_DIS 0 +#define MVGBE_CPTR_TCP_FRMS_EN (1 << 14) +#define MVGBE_CPTR_UDP_FRMS_DIS 0 +#define MVGBE_CPTR_UDP_FRMS_EN (1 << 15) +#define MVGBE_DFLT_RX_TCPQ(_x) (_x << 16) +#define MVGBE_DFLT_RX_UDPQ(_x) (_x << 19) +#define MVGBE_DFLT_RX_BPDUQ(_x) (_x << 22) +#define MVGBE_DFLT_RX_TCP_CHKSUM_MODE (1 << 25) + +/* These macros describes the Port configuration extend reg (Px_cXR) bits*/ +#define MVGBE_CLASSIFY_EN 1 +#define MVGBE_SPAN_BPDU_PACKETS_AS_NORMAL 0 +#define MVGBE_SPAN_BPDU_PACKETS_TO_RX_Q7 (1 << 1) +#define MVGBE_PARTITION_DIS 0 +#define MVGBE_PARTITION_EN (1 << 2) +#define MVGBE_TX_CRC_GENERATION_EN 0 +#define MVGBE_TX_CRC_GENERATION_DIS (1 << 3) + +/* These macros describes the Port Sdma configuration reg (SDCR) bits */ +#define MVGBE_RIFB 1 +#define MVGBE_RX_BURST_SIZE_1_64BIT 0 +#define MVGBE_RX_BURST_SIZE_2_64BIT (1 << 1) +#define MVGBE_RX_BURST_SIZE_4_64BIT (1 << 2) +#define MVGBE_RX_BURST_SIZE_8_64BIT ((1 << 2) | (1 << 1)) +#define MVGBE_RX_BURST_SIZE_16_64BIT (1 << 3) +#define MVGBE_BLM_RX_NO_SWAP (1 << 4) +#define MVGBE_BLM_RX_BYTE_SWAP 0 +#define MVGBE_BLM_TX_NO_SWAP (1 << 5) +#define MVGBE_BLM_TX_BYTE_SWAP 0 +#define MVGBE_DESCRIPTORS_BYTE_SWAP (1 << 6) +#define MVGBE_DESCRIPTORS_NO_SWAP 0 +#define MVGBE_TX_BURST_SIZE_1_64BIT 0 +#define MVGBE_TX_BURST_SIZE_2_64BIT (1 << 22) +#define MVGBE_TX_BURST_SIZE_4_64BIT (1 << 23) +#define MVGBE_TX_BURST_SIZE_8_64BIT ((1 << 23) | (1 << 22)) +#define MVGBE_TX_BURST_SIZE_16_64BIT (1 << 24) + +/* These macros describes the Port serial control reg (PSCR) bits */ +#define MVGBE_SERIAL_PORT_DIS 0 +#define MVGBE_SERIAL_PORT_EN 1 +#define MVGBE_FORCE_LINK_PASS (1 << 1) +#define MVGBE_DO_NOT_FORCE_LINK_PASS 0 +#define MVGBE_EN_AUTO_NEG_FOR_DUPLX 0 +#define MVGBE_DIS_AUTO_NEG_FOR_DUPLX (1 << 2) +#define MVGBE_EN_AUTO_NEG_FOR_FLOW_CTRL 0 +#define MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL (1 << 3) +#define MVGBE_ADV_NO_FLOW_CTRL 0 +#define MVGBE_ADV_SYMMETRIC_FLOW_CTRL (1 << 4) +#define MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0 +#define MVGBE_FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5) +#define MVGBE_FORCE_BP_MODE_NO_JAM 0 +#define MVGBE_FORCE_BP_MODE_JAM_TX (1 << 7) +#define MVGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1 << 8) +#define MVGBE_FORCE_LINK_FAIL 0 +#define MVGBE_DO_NOT_FORCE_LINK_FAIL (1 << 10) +#define MVGBE_DIS_AUTO_NEG_SPEED_GMII (1 << 13) +#define MVGBE_EN_AUTO_NEG_SPEED_GMII 0 +#define MVGBE_DTE_ADV_0 0 +#define MVGBE_DTE_ADV_1 (1 << 14) +#define MVGBE_MIIPHY_MAC_MODE 0 +#define MVGBE_MIIPHY_PHY_MODE (1 << 15) +#define MVGBE_AUTO_NEG_NO_CHANGE 0 +#define MVGBE_RESTART_AUTO_NEG (1 << 16) +#define MVGBE_MAX_RX_PACKET_1518BYTE 0 +#define MVGBE_MAX_RX_PACKET_1522BYTE (1 << 17) +#define MVGBE_MAX_RX_PACKET_1552BYTE (1 << 18) +#define MVGBE_MAX_RX_PACKET_9022BYTE ((1 << 18) | (1 << 17)) +#define MVGBE_MAX_RX_PACKET_9192BYTE (1 << 19) +#define MVGBE_MAX_RX_PACKET_9700BYTE ((1 << 19) | (1 << 17)) +#define MVGBE_SET_EXT_LOOPBACK (1 << 20) +#define MVGBE_CLR_EXT_LOOPBACK 0 +#define MVGBE_SET_FULL_DUPLEX_MODE (1 << 21) +#define MVGBE_SET_HALF_DUPLEX_MODE 0 +#define MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22) +#define MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0 +#define MVGBE_SET_GMII_SPEED_TO_10_100 0 +#define MVGBE_SET_GMII_SPEED_TO_1000 (1 << 23) +#define MVGBE_SET_MII_SPEED_TO_10 0 +#define MVGBE_SET_MII_SPEED_TO_100 (1 << 24) + +/* SMI register fields */ +#define MVGBE_PHY_SMI_TIMEOUT 10000 +#define MVGBE_PHY_SMI_DATA_OFFS 0 /* Data */ +#define MVGBE_PHY_SMI_DATA_MASK (0xffff << MVGBE_PHY_SMI_DATA_OFFS) +#define MVGBE_PHY_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ +#define MVGBE_PHY_SMI_DEV_ADDR_MASK \ + (PHYADR_MASK << MVGBE_PHY_SMI_DEV_ADDR_OFFS) +#define MVGBE_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr */ +#define MVGBE_SMI_REG_ADDR_MASK \ + (PHYADR_MASK << MVGBE_SMI_REG_ADDR_OFFS) +#define MVGBE_PHY_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ +#define MVGBE_PHY_SMI_OPCODE_MASK (3 << MVGBE_PHY_SMI_OPCODE_OFFS) +#define MVGBE_PHY_SMI_OPCODE_WRITE (0 << MVGBE_PHY_SMI_OPCODE_OFFS) +#define MVGBE_PHY_SMI_OPCODE_READ (1 << MVGBE_PHY_SMI_OPCODE_OFFS) +#define MVGBE_PHY_SMI_READ_VALID_MASK (1 << 27) /* Read Valid */ +#define MVGBE_PHY_SMI_BUSY_MASK (1 << 28) /* Busy */ + +/* SDMA command status fields macros */ +/* Tx & Rx descriptors status */ +#define MVGBE_ERROR_SUMMARY 1 +/* Tx & Rx descriptors command */ +#define MVGBE_BUFFER_OWNED_BY_DMA (1 << 31) +/* Tx descriptors status */ +#define MVGBE_LC_ERROR 0 +#define MVGBE_UR_ERROR (1 << 1) +#define MVGBE_RL_ERROR (1 << 2) +#define MVGBE_LLC_SNAP_FORMAT (1 << 9) +#define MVGBE_TX_LAST_FRAME (1 << 20) + +/* Rx descriptors status */ +#define MVGBE_CRC_ERROR 0 +#define MVGBE_OVERRUN_ERROR (1 << 1) +#define MVGBE_MAX_FRAME_LENGTH_ERROR (1 << 2) +#define MVGBE_RESOURCE_ERROR ((1 << 2) | (1 << 1)) +#define MVGBE_VLAN_TAGGED (1 << 19) +#define MVGBE_BPDU_FRAME (1 << 20) +#define MVGBE_TCP_FRAME_OVER_IP_V_4 0 +#define MVGBE_UDP_FRAME_OVER_IP_V_4 (1 << 21) +#define MVGBE_OTHER_FRAME_TYPE (1 << 22) +#define MVGBE_LAYER_2_IS_MVGBE_V_2 (1 << 23) +#define MVGBE_FRAME_TYPE_IP_V_4 (1 << 24) +#define MVGBE_FRAME_HEADER_OK (1 << 25) +#define MVGBE_RX_LAST_DESC (1 << 26) +#define MVGBE_RX_FIRST_DESC (1 << 27) +#define MVGBE_UNKNOWN_DESTINATION_ADDR (1 << 28) +#define MVGBE_RX_EN_INTERRUPT (1 << 29) +#define MVGBE_LAYER_4_CHECKSUM_OK (1 << 30) + +/* Rx descriptors byte count */ +#define MVGBE_FRAME_FRAGMENTED (1 << 2) + +/* Tx descriptors command */ +#define MVGBE_LAYER_4_CHECKSUM_FIRST_DESC (1 << 10) +#define MVGBE_FRAME_SET_TO_VLAN (1 << 15) +#define MVGBE_TCP_FRAME 0 +#define MVGBE_UDP_FRAME (1 << 16) +#define MVGBE_GEN_TCP_UDP_CHECKSUM (1 << 17) +#define MVGBE_GEN_IP_V_4_CHECKSUM (1 << 18) +#define MVGBE_ZERO_PADDING (1 << 19) +#define MVGBE_TX_LAST_DESC (1 << 20) +#define MVGBE_TX_FIRST_DESC (1 << 21) +#define MVGBE_GEN_CRC (1 << 22) +#define MVGBE_TX_EN_INTERRUPT (1 << 23) +#define MVGBE_AUTO_MODE (1 << 30) + +/* Address decode parameters */ +/* Ethernet Base Address Register bits */ +#define EBAR_TARGET_DRAM 0x00000000 +#define EBAR_TARGET_DEVICE 0x00000001 +#define EBAR_TARGET_CBS 0x00000002 +#define EBAR_TARGET_PCI0 0x00000003 +#define EBAR_TARGET_PCI1 0x00000004 +#define EBAR_TARGET_CUNIT 0x00000005 +#define EBAR_TARGET_AUNIT 0x00000006 +#define EBAR_TARGET_GUNIT 0x00000007 + +/* Window attrib */ +#define EBAR_DRAM_CS0 0x00000E00 +#define EBAR_DRAM_CS1 0x00000D00 +#define EBAR_DRAM_CS2 0x00000B00 +#define EBAR_DRAM_CS3 0x00000700 + +/* DRAM Target interface */ +#define EBAR_DRAM_NO_CACHE_COHERENCY 0x00000000 +#define EBAR_DRAM_CACHE_COHERENCY_WT 0x00001000 +#define EBAR_DRAM_CACHE_COHERENCY_WB 0x00002000 + +/* Device Bus Target interface */ +#define EBAR_DEVICE_DEVCS0 0x00001E00 +#define EBAR_DEVICE_DEVCS1 0x00001D00 +#define EBAR_DEVICE_DEVCS2 0x00001B00 +#define EBAR_DEVICE_DEVCS3 0x00001700 +#define EBAR_DEVICE_BOOTCS3 0x00000F00 + +/* PCI Target interface */ +#define EBAR_PCI_BYTE_SWAP 0x00000000 +#define EBAR_PCI_NO_SWAP 0x00000100 +#define EBAR_PCI_BYTE_WORD_SWAP 0x00000200 +#define EBAR_PCI_WORD_SWAP 0x00000300 +#define EBAR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000 +#define EBAR_PCI_NO_SNOOP_ASSERT 0x00000400 +#define EBAR_PCI_IO_SPACE 0x00000000 +#define EBAR_PCI_MEMORY_SPACE 0x00000800 +#define EBAR_PCI_REQ64_FORCE 0x00000000 +#define EBAR_PCI_REQ64_SIZE 0x00001000 + +/* Window access control */ +#define EWIN_ACCESS_NOT_ALLOWED 0 +#define EWIN_ACCESS_READ_ONLY 1 +#define EWIN_ACCESS_FULL ((1 << 1) | 1) + +/* structures represents Controller registers */ +struct mvgbe_barsz { + u32 bar; + u32 size; +}; + +struct mvgbe_rxcdp { + struct mvgbe_rxdesc *rxcdp; + u32 rxcdp_pad[3]; +}; + +struct mvgbe_tqx { + u32 qxttbc; + u32 tqxtbc; + u32 tqxac; + u32 tqxpad; +}; + +struct mvgbe_registers { + u32 phyadr; + u32 smi; + u32 euda; + u32 eudid; + u8 pad1[0x080 - 0x00c - 4]; + u32 euic; + u32 euim; + u8 pad2[0x094 - 0x084 - 4]; + u32 euea; + u32 euiae; + u8 pad3[0x0b0 - 0x098 - 4]; + u32 euc; + u8 pad3a[0x200 - 0x0b0 - 4]; + struct mvgbe_barsz barsz[6]; + u8 pad4[0x280 - 0x22c - 4]; + u32 ha_remap[4]; + u32 bare; + u32 epap; + u8 pad5[0x400 - 0x294 - 4]; + u32 pxc; + u32 pxcx; + u32 mii_ser_params; + u8 pad6[0x410 - 0x408 - 4]; + u32 evlane; + u32 macal; + u32 macah; + u32 sdc; + u32 dscp[7]; + u32 psc0; + u32 vpt2p; + u32 ps0; + u32 tqc; + u32 psc1; + u32 ps1; + u32 mrvl_header; + u8 pad7[0x460 - 0x454 - 4]; + u32 ic; + u32 ice; + u32 pim; + u32 peim; + u8 pad8[0x474 - 0x46c - 4]; + u32 pxtfut; + u32 pad9; + u32 pxmfs; + u32 pad10; + u32 pxdfc; + u32 pxofc; + u8 pad11[0x494 - 0x488 - 4]; + u32 peuiae; + u8 pad12[0x4bc - 0x494 - 4]; + u32 eth_type_prio; + u8 pad13[0x4dc - 0x4bc - 4]; + u32 tqfpc; + u32 pttbrc; + u32 tqc1; + u32 pmtu; + u32 pmtbs; + u8 pad14[0x60c - 0x4ec - 4]; + struct mvgbe_rxcdp rxcdp[7]; + struct mvgbe_rxdesc *rxcdp7; + u32 rqc; + struct mvgbe_txdesc *tcsdp; + u8 pad15[0x6c0 - 0x684 - 4]; + struct mvgbe_txdesc *tcqdp[8]; + u8 pad16[0x700 - 0x6dc - 4]; + struct mvgbe_tqx tqx[8]; + u32 pttbc; + u8 pad17[0x7a8 - 0x780 - 4]; + u32 tqxipg0; + u32 pad18[3]; + u32 tqxipg1; + u8 pad19[0x7c0 - 0x7b8 - 4]; + u32 hitkninlopkt; + u32 hitkninasyncpkt; + u32 lotkninasyncpkt; + u32 pad20; + u32 ts; + u8 pad21[0x3000 - 0x27d0 - 4]; + u32 pad20_1[32]; /* mib counter registes */ + u8 pad22[0x3400 - 0x3000 - sizeof(u32) * 32]; + u32 dfsmt[64]; + u32 dfomt[64]; + u32 dfut[4]; + u8 pad23[0xe20c0 - 0x7360c - 4]; + u32 pmbus_top_arbiter; +}; + +/* structures/enums needed by driver */ +enum mvgbe_adrwin { + MVGBE_WIN0, + MVGBE_WIN1, + MVGBE_WIN2, + MVGBE_WIN3, + MVGBE_WIN4, + MVGBE_WIN5 +}; + +enum mvgbe_target { + MVGBE_TARGET_DRAM, + MVGBE_TARGET_DEV, + MVGBE_TARGET_CBS, + MVGBE_TARGET_PCI0, + MVGBE_TARGET_PCI1 +}; + +struct mvgbe_winparam { + enum mvgbe_adrwin win; /* Window number */ + enum mvgbe_target target; /* System targets */ + u16 attrib; /* BAR attrib. See above macros */ + u32 base_addr; /* Window base address in u32 form */ + u32 high_addr; /* Window high address in u32 form */ + u32 size; /* Size in MBytes. Must be % 64Kbyte. */ + int enable; /* Enable/disable access to the window. */ + u16 access_ctrl; /*Access ctrl register. see above macros */ +}; + +struct mvgbe_rxdesc { + u32 cmd_sts; /* Descriptor command status */ + u16 buf_size; /* Buffer size */ + u16 byte_cnt; /* Descriptor buffer byte count */ + u8 *buf_ptr; /* Descriptor buffer pointer */ + struct mvgbe_rxdesc *nxtdesc_p; /* Next descriptor pointer */ +}; + +struct mvgbe_txdesc { + u32 cmd_sts; /* Descriptor command status */ + u16 l4i_chk; /* CPU provided TCP Checksum */ + u16 byte_cnt; /* Descriptor buffer byte count */ + u8 *buf_ptr; /* Descriptor buffer ptr */ + struct mvgbe_txdesc *nxtdesc_p; /* Next descriptor ptr */ +}; + +/* port device data struct */ +struct mvgbe_device { + struct eth_device dev; + struct mvgbe_registers *regs; + struct mvgbe_txdesc *p_txdesc; + struct mvgbe_rxdesc *p_rxdesc; + struct mvgbe_rxdesc *p_rxdesc_curr; + u8 *p_rxbuf; + u8 *p_aligned_txbuf; +}; + +#endif /* __MVGBE_H__ */ diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 5fa6f61..54c4a70 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -95,14 +95,23 @@ static struct tsec_info_struct tsec_info[] = { #endif }; +/* + * Initialize all the TSEC devices + * + * Returns the number of TSEC devices that were initialized + */ int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num) { int i; + int ret, count = 0; - for (i = 0; i < num; i++) - tsec_initialize(bis, &tsecs[i]); + for (i = 0; i < num; i++) { + ret = tsec_initialize(bis, &tsecs[i]); + if (ret > 0) + count += ret; + } - return 0; + return count; } int tsec_standard_init(bd_t *bis) @@ -1631,6 +1640,27 @@ static struct phy_info phy_info_dm9161 = { }, }; +/* micrel KSZ804 */ +static struct phy_info phy_info_ksz804 = { + 0x0022151, + "Micrel KSZ804 PHY", + 4, + (struct phy_cmd[]) { /* config */ + {PHY_BMCR, PHY_BMCR_RESET, NULL}, + {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL}, + {miim_end,} + }, + (struct phy_cmd[]) { /* startup */ + {PHY_BMSR, miim_read, NULL}, + {PHY_BMSR, miim_read, &mii_parse_sr}, + {PHY_BMSR, miim_read, &mii_parse_link}, + {miim_end,} + }, + (struct phy_cmd[]) { /* shutdown */ + {miim_end,} + } +}; + /* a generic flavor. */ static struct phy_info phy_info_generic = { 0, @@ -1794,6 +1824,7 @@ static struct phy_info *phy_info[] = { &phy_info_M88E1145, &phy_info_M88E1149S, &phy_info_dm9161, + &phy_info_ksz804, &phy_info_lxt971, &phy_info_VSC8211, &phy_info_VSC8244, diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index 9477851..56eee7b 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -225,7 +225,7 @@ int uli526x_initialize(bd_t *bis) iobase &= ~0xf; dev = (struct eth_device *)malloc(sizeof *dev); - sprintf(dev->name, "uli526x#%d\n", card_number); + sprintf(dev->name, "uli526x#%d", card_number); db = (struct uli526x_board_info *) malloc(sizeof(struct uli526x_board_info)); diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 5a63fa2..001e6eb 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -510,18 +510,25 @@ void fsl_pci_config_unlock(struct pci_controller *hose) #include <libfdt.h> #include <fdt_support.h> -void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose) +void ft_fsl_pci_setup(void *blob, const char *pci_compat, + struct pci_controller *hose, unsigned long ctrl_addr) { - int off = fdt_path_offset(blob, pci_alias); + int off; u32 bus_range[2]; + phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr; + + /* convert ctrl_addr to true physical address */ + p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR; + p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS; + + off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr); if (off < 0) return; /* We assume a cfg_addr not being set means we didn't setup the controller */ if ((hose == NULL) || (hose->cfg_addr == NULL)) { - fdt_del_node_and_alias(blob, pci_alias); + fdt_del_node(blob, off); } else { bus_range[0] = 0; bus_range[1] = hose->last_busno - hose->first_busno; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 63cc68e..c4ec2f4 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -440,10 +440,8 @@ static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "fw") == 0) { addr = simple_strtoul(argv[2], NULL, 16); @@ -471,8 +469,7 @@ static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return qe_upload_firmware((const struct qe_firmware *) addr); } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index f28d42b..e0ad029 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -13,6 +13,8 @@ #include <spi.h> #include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> #include <asm/mach-common/bits/spi.h> struct bfin_spi_slave { @@ -33,54 +35,110 @@ MAKE_SPI_FUNC(SPI_BAUD, 0x14) #define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave) -__attribute__((weak)) +#define MAX_CTRL_CS 7 + +#define gpio_cs(cs) ((cs) - MAX_CTRL_CS) +#ifdef CONFIG_BFIN_SPI_GPIO_CS +# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS) +#else +# define is_gpio_cs(cs) 0 +#endif + int spi_cs_is_valid(unsigned int bus, unsigned int cs) { -#if defined(__ADSPBF538__) || defined(__ADSPBF539__) - /* The SPI1/SPI2 buses are weird ... only 1 CS */ - if (bus > 0 && cs != 1) - return 0; -#endif - return (cs >= 1 && cs <= 7); + if (is_gpio_cs(cs)) + return gpio_is_valid(gpio_cs(cs)); + else + return (cs >= 1 && cs <= MAX_CTRL_CS); } -__attribute__((weak)) void spi_cs_activate(struct spi_slave *slave) { struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); - write_SPI_FLG(bss, - (read_SPI_FLG(bss) & - ~((!bss->flg << 8) << slave->cs)) | - (1 << slave->cs)); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_set_value(cs, bss->flg); + debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); + } else { + write_SPI_FLG(bss, + (read_SPI_FLG(bss) & + ~((!bss->flg << 8) << slave->cs)) | + (1 << slave->cs)); + debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); + } + SSYNC(); - debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); } -__attribute__((weak)) void spi_cs_deactivate(struct spi_slave *slave) { struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); - u16 flg; - - /* make sure we force the cs to deassert rather than let the - * pin float back up. otherwise, exact timings may not be - * met some of the time leading to random behavior (ugh). - */ - flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs); - write_SPI_FLG(bss, flg); - SSYNC(); - debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); - flg &= ~(1 << slave->cs); - write_SPI_FLG(bss, flg); + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_set_value(cs, !bss->flg); + debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); + } else { + u16 flg; + + /* make sure we force the cs to deassert rather than let the + * pin float back up. otherwise, exact timings may not be + * met some of the time leading to random behavior (ugh). + */ + flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs); + write_SPI_FLG(bss, flg); + SSYNC(); + debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); + + flg &= ~(1 << slave->cs); + write_SPI_FLG(bss, flg); + debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); + } + SSYNC(); - debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); } void spi_init() { } +#ifdef SPI_CTL +# define SPI0_CTL SPI_CTL +#endif + +#define SPI_PINS(n) \ + [n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 } +static unsigned short pins[][5] = { +#ifdef SPI0_CTL + SPI_PINS(0), +#endif +#ifdef SPI1_CTL + SPI_PINS(1), +#endif +#ifdef SPI2_CTL + SPI_PINS(2), +#endif +}; + +#define SPI_CS_PINS(n) \ + [n] = { \ + P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \ + P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \ + P_SPI##n##_SSEL7, \ + } +static const unsigned short cs_pins[][7] = { +#ifdef SPI0_CTL + SPI_CS_PINS(0), +#endif +#ifdef SPI1_CTL + SPI_CS_PINS(1), +#endif +#ifdef SPI2_CTL + SPI_CS_PINS(2), +#endif +}; + struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { @@ -92,11 +150,14 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!spi_cs_is_valid(bus, cs)) return NULL; + if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) { + debug("%s: invalid bus %u\n", __func__, bus); + return NULL; + } switch (bus) { -#ifdef SPI_CTL -# define SPI0_CTL SPI_CTL -#endif +#ifdef SPI0_CTL case 0: mmr_base = SPI0_CTL; break; +#endif #ifdef SPI1_CTL case 1: mmr_base = SPI1_CTL; break; #endif @@ -142,168 +203,21 @@ void spi_free_slave(struct spi_slave *slave) free(bss); } -static void spi_portmux(struct spi_slave *slave) -{ -#if defined(__ADSPBF51x__) -#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func) - u16 f_mux = bfin_read_PORTF_MUX(); - u16 f_fer = bfin_read_PORTF_FER(); - u16 g_mux = bfin_read_PORTG_MUX(); - u16 g_fer = bfin_read_PORTG_FER(); - u16 h_mux = bfin_read_PORTH_MUX(); - u16 h_fer = bfin_read_PORTH_FER(); - switch (slave->bus) { - case 0: - /* set SCK/MISO/MOSI */ - SET_MUX(g, 7, 1); - g_fer |= PG12 | PG13 | PG14; - switch (slave->cs) { - case 1: SET_MUX(f, 2, 1); f_fer |= PF7; break; - case 2: /* see G above */ g_fer |= PG15; break; - case 3: SET_MUX(h, 1, 3); f_fer |= PH4; break; - case 4: /* no muxing */ h_fer |= PH8; break; - case 5: SET_MUX(g, 1, 3); h_fer |= PG3; break; - case 6: /* no muxing */ break; - case 7: /* no muxing */ break; - } - case 1: - /* set SCK/MISO/MOSI */ - SET_MUX(h, 0, 2); - h_fer |= PH1 | PH2 | PH3; - switch (slave->cs) { - case 1: SET_MUX(h, 2, 3); h_fer |= PH6; break; - case 2: SET_MUX(f, 0, 3); f_fer |= PF0; break; - case 3: SET_MUX(g, 0, 3); g_fer |= PG0; break; - case 4: SET_MUX(f, 3, 3); f_fer |= PF8; break; - case 5: SET_MUX(g, 6, 3); h_fer |= PG11; break; - case 6: /* no muxing */ break; - case 7: /* no muxing */ break; - } - } - bfin_write_PORTF_MUX(f_mux); - bfin_write_PORTF_FER(f_fer); - bfin_write_PORTG_MUX(g_mux); - bfin_write_PORTG_FER(g_fer); - bfin_write_PORTH_MUX(h_mux); - bfin_write_PORTH_FER(h_fer); -#elif defined(__ADSPBF52x__) -#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func) - u16 f_mux = bfin_read_PORTF_MUX(); - u16 f_fer = bfin_read_PORTF_FER(); - u16 g_mux = bfin_read_PORTG_MUX(); - u16 g_fer = bfin_read_PORTG_FER(); - u16 h_mux = bfin_read_PORTH_MUX(); - u16 h_fer = bfin_read_PORTH_FER(); - /* set SCK/MISO/MOSI */ - SET_MUX(g, 0, 3); - g_fer |= PG2 | PG3 | PG4; - switch (slave->cs) { - case 1: /* see G above */ g_fer |= PG1; break; - case 2: SET_MUX(f, 4, 3); f_fer |= PF12; break; - case 3: SET_MUX(f, 4, 3); f_fer |= PF13; break; - case 4: SET_MUX(h, 1, 1); h_fer |= PH8; break; - case 5: SET_MUX(h, 2, 1); h_fer |= PH9; break; - case 6: SET_MUX(f, 1, 3); f_fer |= PF9; break; - case 7: SET_MUX(f, 2, 3); f_fer |= PF10; break; - } - bfin_write_PORTF_MUX(f_mux); - bfin_write_PORTF_FER(f_fer); - bfin_write_PORTG_MUX(g_mux); - bfin_write_PORTG_FER(g_fer); - bfin_write_PORTH_MUX(h_mux); - bfin_write_PORTH_FER(h_fer); -#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) - u16 mux = bfin_read_PORT_MUX(); - u16 f_fer = bfin_read_PORTF_FER(); - /* set SCK/MISO/MOSI */ - f_fer |= PF11 | PF12 | PF13; - switch (slave->cs) { - case 1: f_fer |= PF10; break; - case 2: mux |= PJSE; break; - case 3: mux |= PJSE; break; - case 4: mux |= PFS4E; f_fer |= PF6; break; - case 5: mux |= PFS5E; f_fer |= PF5; break; - case 6: mux |= PFS6E; f_fer |= PF4; break; - case 7: mux |= PJCE_SPI; break; - } - bfin_write_PORT_MUX(mux); - bfin_write_PORTF_FER(f_fer); -#elif defined(__ADSPBF538__) || defined(__ADSPBF539__) - u16 fer, pins; - if (slave->bus == 1) - pins = PD0 | PD1 | PD2 | (slave->cs == 1 ? PD4 : 0); - else if (slave->bus == 2) - pins = PD5 | PD6 | PD7 | (slave->cs == 1 ? PD9 : 0); - else - pins = 0; - if (pins) { - fer = bfin_read_PORTDIO_FER(); - fer &= ~pins; - bfin_write_PORTDIO_FER(fer); - } -#elif defined(__ADSPBF54x__) -#define DO_MUX(port, pin) \ - mux = ((mux & ~PORT_x_MUX_##pin##_MASK) | PORT_x_MUX_##pin##_FUNC_1); \ - fer |= P##port##pin; - u32 mux; - u16 fer; - switch (slave->bus) { - case 0: - mux = bfin_read_PORTE_MUX(); - fer = bfin_read_PORTE_FER(); - /* set SCK/MISO/MOSI */ - DO_MUX(E, 0); - DO_MUX(E, 1); - DO_MUX(E, 2); - switch (slave->cs) { - case 1: DO_MUX(E, 4); break; - case 2: DO_MUX(E, 5); break; - case 3: DO_MUX(E, 6); break; - } - bfin_write_PORTE_MUX(mux); - bfin_write_PORTE_FER(fer); - break; - case 1: - mux = bfin_read_PORTG_MUX(); - fer = bfin_read_PORTG_FER(); - /* set SCK/MISO/MOSI */ - DO_MUX(G, 8); - DO_MUX(G, 9); - DO_MUX(G, 10); - switch (slave->cs) { - case 1: DO_MUX(G, 5); break; - case 2: DO_MUX(G, 6); break; - case 3: DO_MUX(G, 7); break; - } - bfin_write_PORTG_MUX(mux); - bfin_write_PORTG_FER(fer); - break; - case 2: - mux = bfin_read_PORTB_MUX(); - fer = bfin_read_PORTB_FER(); - /* set SCK/MISO/MOSI */ - DO_MUX(B, 12); - DO_MUX(B, 13); - DO_MUX(B, 14); - switch (slave->cs) { - case 1: DO_MUX(B, 9); break; - case 2: DO_MUX(B, 10); break; - case 3: DO_MUX(B, 11); break; - } - bfin_write_PORTB_MUX(mux); - bfin_write_PORTB_FER(fer); - break; - } -#endif -} - int spi_claim_bus(struct spi_slave *slave) { struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); - spi_portmux(slave); + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_request(cs, "bfin-spi"); + gpio_direction_output(cs, !bss->flg); + pins[slave->bus][0] = P_DONTCARE; + } else + pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1]; + peripheral_request_list(pins[slave->bus], "bfin-spi"); + write_SPI_CTL(bss, bss->ctl); write_SPI_BAUD(bss, bss->baud); SSYNC(); @@ -314,7 +228,13 @@ int spi_claim_bus(struct spi_slave *slave) void spi_release_bus(struct spi_slave *slave) { struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + peripheral_free_list(pins[slave->bus]); + if (is_gpio_cs(slave->cs)) + gpio_free(gpio_cs(slave->cs)); + write_SPI_CTL(bss, 0); SSYNC(); } diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 4518ecb..13aca52 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -173,7 +173,7 @@ static int davinci_spi_read(struct spi_slave *slave, unsigned int len, } static int davinci_spi_write(struct spi_slave *slave, unsigned int len, - const u8 *txp, unsigned long flags) + const u8 *txp, unsigned long flags) { struct davinci_spi_slave *ds = to_davinci_spi(slave); unsigned int data1_reg_val; @@ -237,7 +237,7 @@ static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len, #endif int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) + const void *dout, void *din, unsigned long flags) { unsigned int len; @@ -266,6 +266,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, #ifndef CONFIG_SPI_HALF_DUPLEX else return davinci_spi_read_write(slave, len, din, dout, flags); +#else + printf("SPI full duplex transaction requested with " + "CONFIG_SPI_HALF_DUPLEX defined.\n"); + flags |= SPI_XFER_END; #endif out: diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h index c934e0c..2886d7e 100644 --- a/drivers/usb/musb/omap3.h +++ b/drivers/usb/musb/omap3.h @@ -45,7 +45,7 @@ int musb_platform_init(void); #ifdef CONFIG_OMAP3_EVM -extern u8 omap3_evm_use_extvbus(void); +extern u8 omap3_evm_need_extvbus(void); #endif #endif /* _MUSB_OMAP3_H */ diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 96d52fb..fae5417 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1119,7 +1119,7 @@ int video_display_bitmap (ulong bmp_image, int x, int y) case 8: padded_line -= width; if (VIDEO_DATA_FORMAT == GDF__8BIT_INDEX) { - /* Copy colormap */ + /* Copy colormap */ for (xcount = 0; xcount < colors; ++xcount) { cte = bmp->color_table[xcount]; video_set_lut (xcount, cte.red, cte.green, cte.blue); @@ -1321,11 +1321,11 @@ void logo_plot (void *screen, int width, int x, int y) #ifdef CONFIG_VIDEO_BMP_LOGO source = bmp_logo_bitmap; - /* Allocate temporary space for computing colormap */ + /* Allocate temporary space for computing colormap */ logo_red = malloc (BMP_LOGO_COLORS); logo_green = malloc (BMP_LOGO_COLORS); logo_blue = malloc (BMP_LOGO_COLORS); - /* Compute color map */ + /* Compute color map */ for (i = 0; i < VIDEO_LOGO_COLORS; i++) { logo_red[i] = (bmp_logo_palette[i] & 0x0f00) >> 4; logo_green[i] = (bmp_logo_palette[i] & 0x00f0); diff --git a/examples/standalone/smc911x_eeprom.c b/examples/standalone/smc911x_eeprom.c index c51a050..00e8266 100644 --- a/examples/standalone/smc911x_eeprom.c +++ b/examples/standalone/smc911x_eeprom.c @@ -240,7 +240,7 @@ static void dump_eeprom(struct eth_device *dev) static int smc911x_init(struct eth_device *dev) { /* See if there is anything there */ - if (!smc911x_detect_chip(dev)) + if (smc911x_detect_chip(dev)) return 1; smc911x_reset(dev); diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 6b3a274..003666e 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -34,8 +34,7 @@ /* * Convert a string to lowercase. */ -static void -downcase(char *str) +static void downcase (char *str) { while (*str != '\0') { TOLOWER(*str); @@ -43,43 +42,49 @@ downcase(char *str) } } -static block_dev_desc_t *cur_dev = NULL; +static block_dev_desc_t *cur_dev = NULL; + static unsigned long part_offset = 0; + static int cur_part = 1; #define DOS_PART_TBL_OFFSET 0x1be #define DOS_PART_MAGIC_OFFSET 0x1fe #define DOS_FS_TYPE_OFFSET 0x36 +#define DOS_FS32_TYPE_OFFSET 0x52 -int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) +static int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) { - startblock += part_offset; if (cur_dev == NULL) return -1; + + startblock += part_offset; + if (cur_dev->block_read) { - return cur_dev->block_read (cur_dev->dev - , startblock, getsize, (unsigned long *)bufptr); + return cur_dev->block_read(cur_dev->dev, startblock, getsize, + (unsigned long *) bufptr); } return -1; } - -int -fat_register_device(block_dev_desc_t *dev_desc, int part_no) +int fat_register_device (block_dev_desc_t * dev_desc, int part_no) { unsigned char buffer[SECTOR_SIZE]; + disk_partition_t info; if (!dev_desc->block_read) return -1; + cur_dev = dev_desc; /* check if we have a MBR (on floppies we have only a PBR) */ - if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { - printf ("** Can't read from device %d **\n", dev_desc->dev); + if (dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *)buffer) != 1) { + printf("** Can't read from device %d **\n", + dev_desc->dev); return -1; } if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || - buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { + buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { /* no signature found */ return -1; } @@ -90,22 +95,24 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) || \ defined(CONFIG_SYSTEMACE) ) - /* First we assume, there is a MBR */ - if (!get_partition_info (dev_desc, part_no, &info)) { + /* First we assume there is a MBR */ + if (!get_partition_info(dev_desc, part_no, &info)) { part_offset = info.start; cur_part = part_no; - } else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) { + } else if ((strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3) == 0) || + (strncmp((char *)&buffer[DOS_FS32_TYPE_OFFSET], "FAT32", 5) == 0)) { /* ok, we assume we are on a PBR only */ cur_part = 1; part_offset = 0; } else { - printf ("** Partition %d not valid on device %d **\n", - part_no, dev_desc->dev); + printf("** Partition %d not valid on device %d **\n", + part_no, dev_desc->dev); return -1; } #else - if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { + if ((strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3) == 0) || + (strncmp((char *)&buffer[DOS_FS32_TYPE_OFFSET], "FAT32", 5) == 0)) { /* ok, we assume we are on a PBR only */ cur_part = 1; part_offset = 0; @@ -123,18 +130,17 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) return 0; } - /* * Get the first occurence of a directory delimiter ('/' or '\') in a string. * Return index into string if found, -1 otherwise. */ -static int -dirdelim(char *str) +static int dirdelim (char *str) { char *start = str; while (*str != '\0') { - if (ISDIRDELIM(*str)) return str - start; + if (ISDIRDELIM(*str)) + return str - start; str++; } return -1; @@ -147,7 +153,7 @@ static void get_name (dir_entry *dirent, char *s_name) { char *ptr; - memcpy (s_name, dirent->name, 8); + memcpy(s_name, dirent->name, 8); s_name[8] = '\0'; ptr = s_name; while (*ptr && *ptr != ' ') @@ -155,7 +161,7 @@ static void get_name (dir_entry *dirent, char *s_name) if (dirent->ext[0] && dirent->ext[0] != ' ') { *ptr = '.'; ptr++; - memcpy (ptr, dirent->ext, 3); + memcpy(ptr, dirent->ext, 3); ptr[3] = '\0'; while (*ptr && *ptr != ' ') ptr++; @@ -165,19 +171,19 @@ static void get_name (dir_entry *dirent, char *s_name) *s_name = '\0'; else if (*s_name == aRING) *s_name = DELETED_FLAG; - downcase (s_name); + downcase(s_name); } /* * Get the entry at index 'entry' in a FAT (12/16/32) table. * On failure 0x00 is returned. */ -static __u32 -get_fatent(fsdata *mydata, __u32 entry) +static __u32 get_fatent (fsdata *mydata, __u32 entry) { __u32 bufnum; - __u32 offset; + __u32 off16, offset; __u32 ret = 0x00; + __u16 val1, val2; switch (mydata->fatsize) { case 32: @@ -198,9 +204,12 @@ get_fatent(fsdata *mydata, __u32 entry) return ret; } + debug("FAT%d: entry: 0x%04x = %d, offset: 0x%04x = %d\n", + mydata->fatsize, entry, entry, offset, offset); + /* Read a new block of FAT entries into the cache. */ if (bufnum != mydata->fatbufnum) { - int getsize = FATBUFSIZE/FS_BLOCK_SIZE; + int getsize = FATBUFSIZE / FS_BLOCK_SIZE; __u8 *bufptr = mydata->fatbuf; __u32 fatlength = mydata->fatlength; __u32 startblock = bufnum * FATBUFBLOCKS; @@ -208,9 +217,10 @@ get_fatent(fsdata *mydata, __u32 entry) fatlength *= SECTOR_SIZE; /* We want it in bytes now */ startblock += mydata->fat_sect; /* Offset from start of disk */ - if (getsize > fatlength) getsize = fatlength; + if (getsize > fatlength) + getsize = fatlength; if (disk_read(startblock, getsize, bufptr) < 0) { - FAT_DPRINT("Error reading FAT blocks\n"); + debug("Error reading FAT blocks\n"); return ret; } mydata->fatbufnum = bufnum; @@ -219,79 +229,81 @@ get_fatent(fsdata *mydata, __u32 entry) /* Get the actual entry from the table */ switch (mydata->fatsize) { case 32: - ret = FAT2CPU32(((__u32*)mydata->fatbuf)[offset]); + ret = FAT2CPU32(((__u32 *) mydata->fatbuf)[offset]); break; case 16: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[offset]); + ret = FAT2CPU16(((__u16 *) mydata->fatbuf)[offset]); break; - case 12: { - __u32 off16 = (offset*3)/4; - __u16 val1, val2; + case 12: + off16 = (offset * 3) / 4; switch (offset & 0x3) { case 0: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); + ret = FAT2CPU16(((__u16 *) mydata->fatbuf)[off16]); ret &= 0xfff; break; case 1: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); + val1 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16]); val1 &= 0xf000; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); + val2 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16 + 1]); val2 &= 0x00ff; ret = (val2 << 4) | (val1 >> 12); break; case 2: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); + val1 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16]); val1 &= 0xff00; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); + val2 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16 + 1]); val2 &= 0x000f; ret = (val2 << 8) | (val1 >> 8); break; case 3: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);; + ret = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16]); ret = (ret & 0xfff0) >> 4; break; default: break; } + break; } - break; - } - FAT_DPRINT("ret: %d, offset: %d\n", ret, offset); + debug("FAT%d: ret: %08x, offset: %04x\n", + mydata->fatsize, ret, offset); return ret; } - /* * Read at most 'size' bytes from the specified cluster into 'buffer'. * Return 0 on success, -1 otherwise. */ static int -get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) +get_cluster (fsdata *mydata, __u32 clustnum, __u8 *buffer, + unsigned long size) { int idx = 0; __u32 startsect; if (clustnum > 0) { - startsect = mydata->data_begin + clustnum*mydata->clust_size; + startsect = mydata->data_begin + + clustnum * mydata->clust_size; } else { startsect = mydata->rootdir_sect; } - FAT_DPRINT("gc - clustnum: %d, startsect: %d\n", clustnum, startsect); - if (disk_read(startsect, size/FS_BLOCK_SIZE , buffer) < 0) { - FAT_DPRINT("Error reading data\n"); + debug("gc - clustnum: %d, startsect: %d\n", clustnum, startsect); + + if (disk_read(startsect, size / FS_BLOCK_SIZE, buffer) < 0) { + debug("Error reading data\n"); return -1; } - if(size % FS_BLOCK_SIZE) { + if (size % FS_BLOCK_SIZE) { __u8 tmpbuf[FS_BLOCK_SIZE]; - idx= size/FS_BLOCK_SIZE; + + idx = size / FS_BLOCK_SIZE; if (disk_read(startsect + idx, 1, tmpbuf) < 0) { - FAT_DPRINT("Error reading data\n"); + debug("Error reading data\n"); return -1; } - buffer += idx*FS_BLOCK_SIZE; + buffer += idx * FS_BLOCK_SIZE; memcpy(buffer, tmpbuf, size % FS_BLOCK_SIZE); return 0; @@ -300,15 +312,14 @@ get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) return 0; } - /* * Read at most 'maxsize' bytes from the file associated with 'dentptr' * into 'buffer'. * Return the number of bytes read or -1 on fatal errors. */ static long -get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, - unsigned long maxsize) +get_contents (fsdata *mydata, dir_entry *dentptr, __u8 *buffer, + unsigned long maxsize) { unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0; unsigned int bytesperclust = mydata->clust_size * SECTOR_SIZE; @@ -316,161 +327,174 @@ get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, __u32 endclust, newclust; unsigned long actsize; - FAT_DPRINT("Filesize: %ld bytes\n", filesize); + debug("Filesize: %ld bytes\n", filesize); + + if (maxsize > 0 && filesize > maxsize) + filesize = maxsize; - if (maxsize > 0 && filesize > maxsize) filesize = maxsize; + debug("%ld bytes\n", filesize); - FAT_DPRINT("Reading: %ld bytes\n", filesize); + actsize = bytesperclust; + endclust = curclust; - actsize=bytesperclust; - endclust=curclust; do { /* search for consecutive clusters */ - while(actsize < filesize) { + while (actsize < filesize) { newclust = get_fatent(mydata, endclust); - if((newclust -1)!=endclust) + if ((newclust - 1) != endclust) goto getit; if (CHECK_CLUST(newclust, mydata->fatsize)) { - FAT_DPRINT("curclust: 0x%x\n", newclust); - FAT_DPRINT("Invalid FAT entry\n"); + debug("curclust: 0x%x\n", newclust); + debug("Invalid FAT entry\n"); return gotsize; } - endclust=newclust; - actsize+= bytesperclust; + endclust = newclust; + actsize += bytesperclust; } + /* actsize >= file size */ actsize -= bytesperclust; + /* get remaining clusters */ if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); + printf("Error reading cluster\n"); return -1; } + /* get remaining bytes */ gotsize += (int)actsize; filesize -= actsize; buffer += actsize; - actsize= filesize; + actsize = filesize; if (get_cluster(mydata, endclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); + printf("Error reading cluster\n"); return -1; } - gotsize+=actsize; + gotsize += actsize; return gotsize; getit: if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); + printf("Error reading cluster\n"); return -1; } gotsize += (int)actsize; filesize -= actsize; buffer += actsize; + curclust = get_fatent(mydata, endclust); if (CHECK_CLUST(curclust, mydata->fatsize)) { - FAT_DPRINT("curclust: 0x%x\n", curclust); - FAT_ERROR("Invalid FAT entry\n"); + debug("curclust: 0x%x\n", curclust); + printf("Invalid FAT entry\n"); return gotsize; } - actsize=bytesperclust; - endclust=curclust; + actsize = bytesperclust; + endclust = curclust; } while (1); } - #ifdef CONFIG_SUPPORT_VFAT /* * Extract the file name information from 'slotptr' into 'l_name', * starting at l_name[*idx]. * Return 1 if terminator (zero byte) is found, 0 otherwise. */ -static int -slot2str(dir_slot *slotptr, char *l_name, int *idx) +static int slot2str (dir_slot *slotptr, char *l_name, int *idx) { int j; for (j = 0; j <= 8; j += 2) { l_name[*idx] = slotptr->name0_4[j]; - if (l_name[*idx] == 0x00) return 1; + if (l_name[*idx] == 0x00) + return 1; (*idx)++; } for (j = 0; j <= 10; j += 2) { l_name[*idx] = slotptr->name5_10[j]; - if (l_name[*idx] == 0x00) return 1; + if (l_name[*idx] == 0x00) + return 1; (*idx)++; } for (j = 0; j <= 2; j += 2) { l_name[*idx] = slotptr->name11_12[j]; - if (l_name[*idx] == 0x00) return 1; + if (l_name[*idx] == 0x00) + return 1; (*idx)++; } return 0; } - /* * Extract the full long filename starting at 'retdent' (which is really * a slot) into 'l_name'. If successful also copy the real directory entry * into 'retdent' * Return 0 on success, -1 otherwise. */ -__attribute__ ((__aligned__(__alignof__(dir_entry)))) +__attribute__ ((__aligned__ (__alignof__ (dir_entry)))) __u8 get_vfatname_block[MAX_CLUSTSIZE]; + static int -get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, - dir_entry *retdent, char *l_name) +get_vfatname (fsdata *mydata, int curclust, __u8 *cluster, + dir_entry *retdent, char *l_name) { dir_entry *realdent; - dir_slot *slotptr = (dir_slot*) retdent; - __u8 *nextclust = cluster + mydata->clust_size * SECTOR_SIZE; - __u8 counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff; + dir_slot *slotptr = (dir_slot *)retdent; + __u8 *nextclust = cluster + mydata->clust_size * SECTOR_SIZE; + __u8 counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff; int idx = 0; - while ((__u8*)slotptr < nextclust) { - if (counter == 0) break; + while ((__u8 *)slotptr < nextclust) { + if (counter == 0) + break; if (((slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff) != counter) return -1; slotptr++; counter--; } - if ((__u8*)slotptr >= nextclust) { + if ((__u8 *)slotptr >= nextclust) { dir_slot *slotptr2; slotptr--; curclust = get_fatent(mydata, curclust); if (CHECK_CLUST(curclust, mydata->fatsize)) { - FAT_DPRINT("curclust: 0x%x\n", curclust); - FAT_ERROR("Invalid FAT entry\n"); + debug("curclust: 0x%x\n", curclust); + printf("Invalid FAT entry\n"); return -1; } + if (get_cluster(mydata, curclust, get_vfatname_block, mydata->clust_size * SECTOR_SIZE) != 0) { - FAT_DPRINT("Error: reading directory block\n"); + debug("Error: reading directory block\n"); return -1; } - slotptr2 = (dir_slot*) get_vfatname_block; - while (slotptr2->id > 0x01) { + + slotptr2 = (dir_slot *)get_vfatname_block; + while (slotptr2->id > 0x01) slotptr2++; - } + /* Save the real directory entry */ - realdent = (dir_entry*)slotptr2 + 1; - while ((__u8*)slotptr2 >= get_vfatname_block) { + realdent = (dir_entry *)slotptr2 + 1; + while ((__u8 *)slotptr2 >= get_vfatname_block) { slot2str(slotptr2, l_name, &idx); slotptr2--; } } else { /* Save the real directory entry */ - realdent = (dir_entry*)slotptr; + realdent = (dir_entry *)slotptr; } do { slotptr--; - if (slot2str(slotptr, l_name, &idx)) break; + if (slot2str(slotptr, l_name, &idx)) + break; } while (!(slotptr->id & LAST_LONG_ENTRY_MASK)); l_name[idx] = '\0'; - if (*l_name == DELETED_FLAG) *l_name = '\0'; - else if (*l_name == aRING) *l_name = DELETED_FLAG; + if (*l_name == DELETED_FLAG) + *l_name = '\0'; + else if (*l_name == aRING) + *l_name = DELETED_FLAG; downcase(l_name); /* Return the real directory entry */ @@ -479,214 +503,226 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, return 0; } - /* Calculate short name checksum */ -static __u8 -mkcksum(const char *str) +static __u8 mkcksum (const char *str) { int i; + __u8 ret = 0; for (i = 0; i < 11; i++) { - ret = (((ret&1)<<7)|((ret&0xfe)>>1)) + str[i]; + ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + str[i]; } return ret; } -#endif - +#endif /* CONFIG_SUPPORT_VFAT */ /* * Get the directory entry associated with 'filename' from the directory * starting at 'startsect' */ -__attribute__ ((__aligned__(__alignof__(dir_entry)))) +__attribute__ ((__aligned__ (__alignof__ (dir_entry)))) __u8 get_dentfromdir_block[MAX_CLUSTSIZE]; -static dir_entry *get_dentfromdir (fsdata * mydata, int startsect, - char *filename, dir_entry * retdent, + +static dir_entry *get_dentfromdir (fsdata *mydata, int startsect, + char *filename, dir_entry *retdent, int dols) { - __u16 prevcksum = 0xffff; - __u32 curclust = START (retdent); - int files = 0, dirs = 0; + __u16 prevcksum = 0xffff; + __u32 curclust = START(retdent); + int files = 0, dirs = 0; - FAT_DPRINT ("get_dentfromdir: %s\n", filename); - while (1) { - dir_entry *dentptr; - int i; + debug("get_dentfromdir: %s\n", filename); + + while (1) { + dir_entry *dentptr; + + int i; + + if (get_cluster(mydata, curclust, get_dentfromdir_block, + mydata->clust_size * SECTOR_SIZE) != 0) { + debug("Error: reading directory block\n"); + return NULL; + } + + dentptr = (dir_entry *)get_dentfromdir_block; + + for (i = 0; i < DIRENTSPERCLUST; i++) { + char s_name[14], l_name[256]; - if (get_cluster (mydata, curclust, get_dentfromdir_block, - mydata->clust_size * SECTOR_SIZE) != 0) { - FAT_DPRINT ("Error: reading directory block\n"); - return NULL; - } - dentptr = (dir_entry *) get_dentfromdir_block; - for (i = 0; i < DIRENTSPERCLUST; i++) { - char s_name[14], l_name[256]; - - l_name[0] = '\0'; - if (dentptr->name[0] == DELETED_FLAG) { - dentptr++; - continue; - } - if ((dentptr->attr & ATTR_VOLUME)) { + l_name[0] = '\0'; + if (dentptr->name[0] == DELETED_FLAG) { + dentptr++; + continue; + } + if ((dentptr->attr & ATTR_VOLUME)) { #ifdef CONFIG_SUPPORT_VFAT - if ((dentptr->attr & ATTR_VFAT) && - (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { - prevcksum = ((dir_slot *) dentptr) - ->alias_checksum; - get_vfatname (mydata, curclust, get_dentfromdir_block, - dentptr, l_name); - if (dols) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (l_name[0] != 0) { - files++; - doit = 1; - } + if ((dentptr->attr & ATTR_VFAT) && + (dentptr-> name[0] & LAST_LONG_ENTRY_MASK)) { + prevcksum = ((dir_slot *)dentptr)->alias_checksum; + get_vfatname(mydata, curclust, + get_dentfromdir_block, + dentptr, l_name); + if (dols) { + int isdir; + char dirc; + int doit = 0; + + isdir = (dentptr->attr & ATTR_DIR); + + if (isdir) { + dirs++; + dirc = '/'; + doit = 1; + } else { + dirc = ' '; + if (l_name[0] != 0) { + files++; + doit = 1; + } + } + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + l_name, + dirc); + } else { + printf(" %s%c\n", + l_name, + dirc); + } + } + dentptr++; + continue; + } + debug("vfatname: |%s|\n", l_name); + } else +#endif + { + /* Volume label or VFAT entry */ + dentptr++; + continue; + } } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), - l_name, dirc); - } else { - printf (" %s%c\n", l_name, dirc); - } + if (dentptr->name[0] == 0) { + if (dols) { + printf("\n%d file(s), %d dir(s)\n\n", + files, dirs); + } + debug("Dentname == NULL - %d\n", i); + return NULL; } - dentptr++; - continue; - } - FAT_DPRINT ("vfatname: |%s|\n", l_name); - } else -#endif - { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } - } - if (dentptr->name[0] == 0) { - if (dols) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - } - FAT_DPRINT ("Dentname == NULL - %d\n", i); - return NULL; - } #ifdef CONFIG_SUPPORT_VFAT - if (dols && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } + if (dols && mkcksum(dentptr->name) == prevcksum) { + dentptr++; + continue; + } #endif - get_name (dentptr, s_name); - if (dols) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } + get_name(dentptr, s_name); + if (dols) { + int isdir = (dentptr->attr & ATTR_DIR); + char dirc; + int doit = 0; + + if (isdir) { + dirs++; + dirc = '/'; + doit = 1; + } else { + dirc = ' '; + if (s_name[0] != 0) { + files++; + doit = 1; + } + } + + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + s_name, dirc); + } else { + printf(" %s%c\n", + s_name, dirc); + } + } + + dentptr++; + continue; + } + + if (strcmp(filename, s_name) + && strcmp(filename, l_name)) { + debug("Mismatch: |%s|%s|\n", s_name, l_name); + dentptr++; + continue; + } + + memcpy(retdent, dentptr, sizeof(dir_entry)); + + debug("DentName: %s", s_name); + debug(", start: 0x%x", START(dentptr)); + debug(", size: 0x%x %s\n", + FAT2CPU32(dentptr->size), + (dentptr->attr & ATTR_DIR) ? "(DIR)" : ""); + + return retdent; } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } + + curclust = get_fatent(mydata, curclust); + if (CHECK_CLUST(curclust, mydata->fatsize)) { + debug("curclust: 0x%x\n", curclust); + printf("Invalid FAT entry\n"); + return NULL; } - dentptr++; - continue; - } - if (strcmp (filename, s_name) && strcmp (filename, l_name)) { - FAT_DPRINT ("Mismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - memcpy (retdent, dentptr, sizeof (dir_entry)); - - FAT_DPRINT ("DentName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), - (dentptr->attr & ATTR_DIR) ? "(DIR)" : ""); - - return retdent; - } - curclust = get_fatent (mydata, curclust); - if (CHECK_CLUST(curclust, mydata->fatsize)) { - FAT_DPRINT ("curclust: 0x%x\n", curclust); - FAT_ERROR ("Invalid FAT entry\n"); - return NULL; - } - } - - return NULL; -} + } + return NULL; +} /* * Read boot sector and volume info from a FAT filesystem */ static int -read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize) +read_bootsectandvi (boot_sector *bs, volume_info *volinfo, int *fatsize) { __u8 block[FS_BLOCK_SIZE]; + volume_info *vistart; - if (disk_read(0, 1, block) < 0) { - FAT_DPRINT("Error: reading block\n"); + if (disk_read (0, 1, block) < 0) { + debug("Error: reading block\n"); return -1; } memcpy(bs, block, sizeof(boot_sector)); - bs->reserved = FAT2CPU16(bs->reserved); - bs->fat_length = FAT2CPU16(bs->fat_length); - bs->secs_track = FAT2CPU16(bs->secs_track); - bs->heads = FAT2CPU16(bs->heads); -#if 0 /* UNUSED */ - bs->hidden = FAT2CPU32(bs->hidden); -#endif - bs->total_sect = FAT2CPU32(bs->total_sect); + bs->reserved = FAT2CPU16(bs->reserved); + bs->fat_length = FAT2CPU16(bs->fat_length); + bs->secs_track = FAT2CPU16(bs->secs_track); + bs->heads = FAT2CPU16(bs->heads); + bs->total_sect = FAT2CPU32(bs->total_sect); /* FAT32 entries */ if (bs->fat_length == 0) { /* Assume FAT32 */ bs->fat32_length = FAT2CPU32(bs->fat32_length); - bs->flags = FAT2CPU16(bs->flags); + bs->flags = FAT2CPU16(bs->flags); bs->root_cluster = FAT2CPU32(bs->root_cluster); - bs->info_sector = FAT2CPU16(bs->info_sector); - bs->backup_boot = FAT2CPU16(bs->backup_boot); - vistart = (volume_info*) (block + sizeof(boot_sector)); + bs->info_sector = FAT2CPU16(bs->info_sector); + bs->backup_boot = FAT2CPU16(bs->backup_boot); + vistart = (volume_info *)(block + sizeof(boot_sector)); *fatsize = 32; } else { - vistart = (volume_info*) &(bs->fat32_length); + vistart = (volume_info *)&(bs->fat32_length); *fatsize = 0; } memcpy(volinfo, vistart, sizeof(volume_info)); if (*fatsize == 32) { - if (strncmp(FAT32_SIGN, vistart->fs_type, SIGNLEN) == 0) { + if (strncmp(FAT32_SIGN, vistart->fs_type, SIGNLEN) == 0) return 0; - } } else { if (strncmp(FAT12_SIGN, vistart->fs_type, SIGNLEN) == 0) { *fatsize = 12; @@ -698,262 +734,338 @@ read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize) } } - FAT_DPRINT("Error: broken fs_type sign\n"); + debug("Error: broken fs_type sign\n"); return -1; } -__attribute__ ((__aligned__(__alignof__(dir_entry)))) +__attribute__ ((__aligned__ (__alignof__ (dir_entry)))) __u8 do_fat_read_block[MAX_CLUSTSIZE]; + long do_fat_read (const char *filename, void *buffer, unsigned long maxsize, int dols) { - char fnamecopy[2048]; - boot_sector bs; - volume_info volinfo; - fsdata datablock; - fsdata *mydata = &datablock; - dir_entry *dentptr; - __u16 prevcksum = 0xffff; - char *subname = ""; - int rootdir_size, cursect; - int idx, isdir = 0; - int files = 0, dirs = 0; - long ret = 0; - int firsttime; - - if (read_bootsectandvi (&bs, &volinfo, &mydata->fatsize)) { - FAT_DPRINT ("Error: reading boot sector\n"); - return -1; - } - if (mydata->fatsize == 32) { - mydata->fatlength = bs.fat32_length; - } else { - mydata->fatlength = bs.fat_length; - } - mydata->fat_sect = bs.reserved; - cursect = mydata->rootdir_sect - = mydata->fat_sect + mydata->fatlength * bs.fats; - mydata->clust_size = bs.cluster_size; - if (mydata->fatsize == 32) { - rootdir_size = mydata->clust_size; - mydata->data_begin = mydata->rootdir_sect /* + rootdir_size */ - - (mydata->clust_size * 2); - } else { - rootdir_size = ((bs.dir_entries[1] * (int) 256 + bs.dir_entries[0]) - * sizeof (dir_entry)) / SECTOR_SIZE; - mydata->data_begin = mydata->rootdir_sect + rootdir_size - - (mydata->clust_size * 2); - } - mydata->fatbufnum = -1; - - FAT_DPRINT ("FAT%d, fatlength: %d\n", mydata->fatsize, - mydata->fatlength); - FAT_DPRINT ("Rootdir begins at sector: %d, offset: %x, size: %d\n" - "Data begins at: %d\n", - mydata->rootdir_sect, mydata->rootdir_sect * SECTOR_SIZE, - rootdir_size, mydata->data_begin); - FAT_DPRINT ("Cluster size: %d\n", mydata->clust_size); - - /* "cwd" is always the root... */ - while (ISDIRDELIM (*filename)) - filename++; - /* Make a copy of the filename and convert it to lowercase */ - strcpy (fnamecopy, filename); - downcase (fnamecopy); - if (*fnamecopy == '\0') { - if (!dols) - return -1; - dols = LS_ROOT; - } else if ((idx = dirdelim (fnamecopy)) >= 0) { - isdir = 1; - fnamecopy[idx] = '\0'; - subname = fnamecopy + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*subname)) - subname++; - } else if (dols) { - isdir = 1; - } - - while (1) { - int i; + char fnamecopy[2048]; + boot_sector bs; + volume_info volinfo; + fsdata datablock; + fsdata *mydata = &datablock; + dir_entry *dentptr; + __u16 prevcksum = 0xffff; + char *subname = ""; + int cursect; + int idx, isdir = 0; + int files = 0, dirs = 0; + long ret = 0; + int firsttime; + int root_cluster; + int j; - if (disk_read (cursect, mydata->clust_size, do_fat_read_block) < 0) { - FAT_DPRINT ("Error: reading rootdir block\n"); - return -1; + if (read_bootsectandvi(&bs, &volinfo, &mydata->fatsize)) { + debug("Error: reading boot sector\n"); + return -1; } - dentptr = (dir_entry *) do_fat_read_block; - for (i = 0; i < DIRENTSPERBLOCK; i++) { - char s_name[14], l_name[256]; - l_name[0] = '\0'; - if ((dentptr->attr & ATTR_VOLUME)) { + root_cluster = bs.root_cluster; + + if (mydata->fatsize == 32) + mydata->fatlength = bs.fat32_length; + else + mydata->fatlength = bs.fat_length; + + mydata->fat_sect = bs.reserved; + + cursect = mydata->rootdir_sect + = mydata->fat_sect + mydata->fatlength * bs.fats; + + mydata->clust_size = bs.cluster_size; + + if (mydata->fatsize == 32) { + mydata->data_begin = mydata->rootdir_sect - + (mydata->clust_size * 2); + } else { + int rootdir_size; + + rootdir_size = ((bs.dir_entries[1] * (int)256 + + bs.dir_entries[0]) * + sizeof(dir_entry)) / + SECTOR_SIZE; + mydata->data_begin = mydata->rootdir_sect + + rootdir_size - + (mydata->clust_size * 2); + } + + mydata->fatbufnum = -1; + #ifdef CONFIG_SUPPORT_VFAT - if ((dentptr->attr & ATTR_VFAT) && - (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { - prevcksum = ((dir_slot *) dentptr)->alias_checksum; - get_vfatname (mydata, 0, do_fat_read_block, dentptr, l_name); - if (dols == LS_ROOT) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (l_name[0] != 0) { - files++; - doit = 1; - } - } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), - l_name, dirc); - } else { - printf (" %s%c\n", l_name, dirc); - } - } - dentptr++; - continue; - } - FAT_DPRINT ("Rootvfatname: |%s|\n", l_name); - } else + debug("VFAT Support enabled\n"); #endif - { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } - } else if (dentptr->name[0] == 0) { - FAT_DPRINT ("RootDentname == NULL - %d\n", i); - if (dols == LS_ROOT) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - return 0; + debug("FAT%d, fat_sect: %d, fatlength: %d\n", + mydata->fatsize, mydata->fat_sect, mydata->fatlength); + debug("Rootdir begins at cluster: %d, sector: %d, offset: %x\n" + "Data begins at: %d\n", + root_cluster, + mydata->rootdir_sect, + mydata->rootdir_sect * SECTOR_SIZE, mydata->data_begin); + debug("Cluster size: %d\n", mydata->clust_size); + + /* "cwd" is always the root... */ + while (ISDIRDELIM(*filename)) + filename++; + + /* Make a copy of the filename and convert it to lowercase */ + strcpy(fnamecopy, filename); + downcase(fnamecopy); + + if (*fnamecopy == '\0') { + if (!dols) + return -1; + + dols = LS_ROOT; + } else if ((idx = dirdelim(fnamecopy)) >= 0) { + isdir = 1; + fnamecopy[idx] = '\0'; + subname = fnamecopy + idx + 1; + + /* Handle multiple delimiters */ + while (ISDIRDELIM(*subname)) + subname++; + } else if (dols) { + isdir = 1; + } + + j = 0; + while (1) { + int i; + + debug("FAT read sect=%d, clust_size=%d, DIRENTSPERBLOCK=%d\n", + cursect, mydata->clust_size, DIRENTSPERBLOCK); + + if (disk_read(cursect, mydata->clust_size, do_fat_read_block) < 0) { + debug("Error: reading rootdir block\n"); + return -1; } - return -1; - } + + dentptr = (dir_entry *) do_fat_read_block; + + for (i = 0; i < DIRENTSPERBLOCK; i++) { + char s_name[14], l_name[256]; + + l_name[0] = '\0'; + if ((dentptr->attr & ATTR_VOLUME)) { +#ifdef CONFIG_SUPPORT_VFAT + if ((dentptr->attr & ATTR_VFAT) && + (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { + prevcksum = + ((dir_slot *)dentptr)->alias_checksum; + + get_vfatname(mydata, 0, + do_fat_read_block, + dentptr, l_name); + + if (dols == LS_ROOT) { + char dirc; + int doit = 0; + int isdir = + (dentptr->attr & ATTR_DIR); + + if (isdir) { + dirs++; + dirc = '/'; + doit = 1; + } else { + dirc = ' '; + if (l_name[0] != 0) { + files++; + doit = 1; + } + } + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + l_name, + dirc); + } else { + printf(" %s%c\n", + l_name, + dirc); + } + } + dentptr++; + continue; + } + debug("Rootvfatname: |%s|\n", + l_name); + } else +#endif + { + /* Volume label or VFAT entry */ + dentptr++; + continue; + } + } else if (dentptr->name[0] == 0) { + debug("RootDentname == NULL - %d\n", i); + if (dols == LS_ROOT) { + printf("\n%d file(s), %d dir(s)\n\n", + files, dirs); + return 0; + } + return -1; + } #ifdef CONFIG_SUPPORT_VFAT - else if (dols == LS_ROOT - && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } + else if (dols == LS_ROOT && + mkcksum(dentptr->name) == prevcksum) { + dentptr++; + continue; + } #endif - get_name (dentptr, s_name); - if (dols == LS_ROOT) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirc = '/'; - if (s_name[0] != 0) { - dirs++; - doit = 1; - } + get_name(dentptr, s_name); + + if (dols == LS_ROOT) { + int isdir = (dentptr->attr & ATTR_DIR); + char dirc; + int doit = 0; + + if (isdir) { + dirc = '/'; + if (s_name[0] != 0) { + dirs++; + doit = 1; + } + } else { + dirc = ' '; + if (s_name[0] != 0) { + files++; + doit = 1; + } + } + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + s_name, dirc); + } else { + printf(" %s%c\n", + s_name, dirc); + } + } + dentptr++; + continue; + } + + if (strcmp(fnamecopy, s_name) + && strcmp(fnamecopy, l_name)) { + debug("RootMismatch: |%s|%s|\n", s_name, + l_name); + dentptr++; + continue; + } + + if (isdir && !(dentptr->attr & ATTR_DIR)) + return -1; + + debug("RootName: %s", s_name); + debug(", start: 0x%x", START(dentptr)); + debug(", size: 0x%x %s\n", + FAT2CPU32(dentptr->size), + isdir ? "(DIR)" : ""); + + goto rootdir_done; /* We got a match */ + } + debug("END LOOP: j=%d clust_size=%d\n", j, + mydata->clust_size); + + /* + * On FAT32 we must fetch the FAT entries for the next + * root directory clusters when a cluster has been + * completely processed. + */ + if ((mydata->fatsize == 32) && (++j == mydata->clust_size)) { + int nxtsect; + int nxt_clust; + + nxt_clust = get_fatent(mydata, root_cluster); + + nxtsect = mydata->data_begin + + (nxt_clust * mydata->clust_size); + + debug("END LOOP: sect=%d, root_clust=%d, " + "n_sect=%d, n_clust=%d\n", + cursect, root_cluster, + nxtsect, nxt_clust); + + root_cluster = nxt_clust; + + cursect = nxtsect; + j = 0; } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } + cursect++; } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } + } +rootdir_done: + + firsttime = 1; + + while (isdir) { + int startsect = mydata->data_begin + + START(dentptr) * mydata->clust_size; + dir_entry dent; + char *nextname = NULL; + + dent = *dentptr; + dentptr = &dent; + + idx = dirdelim(subname); + + if (idx >= 0) { + subname[idx] = '\0'; + nextname = subname + idx + 1; + /* Handle multiple delimiters */ + while (ISDIRDELIM(*nextname)) + nextname++; + if (dols && *nextname == '\0') + firsttime = 0; + } else { + if (dols && firsttime) { + firsttime = 0; + } else { + isdir = 0; + } } - dentptr++; - continue; - } - if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) { - FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - if (isdir && !(dentptr->attr & ATTR_DIR)) - return -1; - FAT_DPRINT ("RootName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), isdir ? "(DIR)" : ""); - - goto rootdir_done; /* We got a match */ - } - cursect++; - } - rootdir_done: - - firsttime = 1; - while (isdir) { - int startsect = mydata->data_begin - + START (dentptr) * mydata->clust_size; - dir_entry dent; - char *nextname = NULL; - - dent = *dentptr; - dentptr = &dent; - - idx = dirdelim (subname); - if (idx >= 0) { - subname[idx] = '\0'; - nextname = subname + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*nextname)) - nextname++; - if (dols && *nextname == '\0') - firsttime = 0; - } else { - if (dols && firsttime) { - firsttime = 0; - } else { - isdir = 0; - } - } + if (get_dentfromdir(mydata, startsect, subname, dentptr, + isdir ? 0 : dols) == NULL) { + if (dols && !isdir) + return 0; + return -1; + } - if (get_dentfromdir (mydata, startsect, subname, dentptr, - isdir ? 0 : dols) == NULL) { - if (dols && !isdir) - return 0; - return -1; + if (idx >= 0) { + if (!(dentptr->attr & ATTR_DIR)) + return -1; + subname = nextname; + } } - if (idx >= 0) { - if (!(dentptr->attr & ATTR_DIR)) - return -1; - subname = nextname; - } - } - ret = get_contents (mydata, dentptr, buffer, maxsize); - FAT_DPRINT ("Size: %d, got: %ld\n", FAT2CPU32 (dentptr->size), ret); + ret = get_contents(mydata, dentptr, buffer, maxsize); + debug("Size: %d, got: %ld\n", FAT2CPU32(dentptr->size), ret); - return ret; + return ret; } - -int -file_fat_detectfs(void) +int file_fat_detectfs (void) { - boot_sector bs; - volume_info volinfo; - int fatsize; - char vol_label[12]; + boot_sector bs; + volume_info volinfo; + int fatsize; + char vol_label[12]; - if(cur_dev==NULL) { + if (cur_dev == NULL) { printf("No current device\n"); return 1; } + #if defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_MG_DISK) || \ defined(CONFIG_CMD_SATA) || \ @@ -961,42 +1073,58 @@ file_fat_detectfs(void) defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) printf("Interface: "); - switch(cur_dev->if_type) { - case IF_TYPE_IDE : printf("IDE"); break; - case IF_TYPE_SATA : printf("SATA"); break; - case IF_TYPE_SCSI : printf("SCSI"); break; - case IF_TYPE_ATAPI : printf("ATAPI"); break; - case IF_TYPE_USB : printf("USB"); break; - case IF_TYPE_DOC : printf("DOC"); break; - case IF_TYPE_MMC : printf("MMC"); break; - default : printf("Unknown"); - } - printf("\n Device %d: ",cur_dev->dev); + switch (cur_dev->if_type) { + case IF_TYPE_IDE: + printf("IDE"); + break; + case IF_TYPE_SATA: + printf("SATA"); + break; + case IF_TYPE_SCSI: + printf("SCSI"); + break; + case IF_TYPE_ATAPI: + printf("ATAPI"); + break; + case IF_TYPE_USB: + printf("USB"); + break; + case IF_TYPE_DOC: + printf("DOC"); + break; + case IF_TYPE_MMC: + printf("MMC"); + break; + default: + printf("Unknown"); + } + + printf("\n Device %d: ", cur_dev->dev); dev_print(cur_dev); #endif - if(read_bootsectandvi(&bs, &volinfo, &fatsize)) { + + if (read_bootsectandvi(&bs, &volinfo, &fatsize)) { printf("\nNo valid FAT fs found\n"); return 1; } - memcpy (vol_label, volinfo.volume_label, 11); + + memcpy(vol_label, volinfo.volume_label, 11); vol_label[11] = '\0'; - volinfo.fs_type[5]='\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n" - ,cur_part,volinfo.fs_type,vol_label); + volinfo.fs_type[5] = '\0'; + + printf("Partition %d: Filesystem: %s \"%s\"\n", cur_part, + volinfo.fs_type, vol_label); + return 0; } - -int -file_fat_ls(const char *dir) +int file_fat_ls (const char *dir) { return do_fat_read(dir, NULL, 0, LS_YES); } - -long -file_fat_read(const char *filename, void *buffer, unsigned long maxsize) +long file_fat_read (const char *filename, void *buffer, unsigned long maxsize) { - printf("reading %s\n",filename); + printf("reading %s\n", filename); return do_fat_read(filename, buffer, maxsize, LS_NO); } diff --git a/fs/fat/file.c b/fs/fat/file.c index e870734..59c5d37 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -48,12 +48,12 @@ char file_cwd[CWD_LEN+1] = "/"; const char * file_getfsname(int idx) { - if (idx < 0 || idx >= NUM_FILESYS) return NULL; + if (idx < 0 || idx >= NUM_FILESYS) + return NULL; return filesystems[idx].name; } - static void pathcpy(char *dest, const char *src) { @@ -72,15 +72,14 @@ pathcpy(char *dest, const char *src) return; } ++dest; - if (ISDIRDELIM(*src)) { + + if (ISDIRDELIM(*src)) while (ISDIRDELIM(*src)) src++; - } else { + else src++; - } } while (1); } - int file_cd(const char *path) { @@ -141,7 +140,6 @@ file_cd(const char *path) return 0; } - int file_detectfs(void) { @@ -160,7 +158,6 @@ file_detectfs(void) return current_filesystem; } - int file_ls(const char *dir) { @@ -181,7 +178,6 @@ file_ls(const char *dir) return filesystems[current_filesystem].ls(arg); } - long file_read(const char *filename, void *buffer, unsigned long maxsize) { diff --git a/include/commproc.h b/include/commproc.h index 9d28abc..762238e 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -828,38 +828,6 @@ typedef struct scc_enet { #endif /* CONFIG_GENIETV */ -/*** GTH ******************************************************/ - -#ifdef CONFIG_GTH -#ifdef CONFIG_FEC_ENET -#define FEC_ENET /* use FEC for EThernet */ -#endif /* CONFIG_FEC_ETHERNET */ - -/* This ENET stuff is for GTH 10 Mbit ( SCC ) */ -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 - -#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */ -#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */ -#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */ -#define PA_ENET_RCLK ((ushort)0x0400) /* PA5 */ - -#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */ - -#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */ -#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */ - -/* NOTE. This is reset for 10Mbit port only */ -#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 */ - -#define SICR_ENET_MASK ((uint)0x000000ff) - -/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */ -#define SICR_ENET_CLKRT ((uint)0x00000037) - -#endif /* CONFIG_GTH */ - /*** HERMES-PRO ******************************************************/ /* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */ diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 49a86fd..c133033 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -91,9 +91,6 @@ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ #define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) /* DDR Setup */ #define CONFIG_FSL_DDR2 diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h deleted file mode 100644 index 3920d35..0000000 --- a/include/configs/EP1C20.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*------------------------------------------------------------------------ - * BOARD/CPU - *----------------------------------------------------------------------*/ -#define CONFIG_EP1C20 1 /* EP1C20 board */ -#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ - -#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */ -#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ - -/*------------------------------------------------------------------------ - * CACHE -- the following will support II/s and II/f. The II/s does not - * have dcache, so the cache instructions will behave as NOPs. - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */ -#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */ -#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ -#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ - -/*------------------------------------------------------------------------ - * MEMORY BASE ADDRESSES - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */ -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ -#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */ -#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */ -#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - * -Monitor at top. - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 128k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */ - -/*------------------------------------------------------------------------ - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above - * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the - * reset address, no? This will keep the environment in user region - * of flash. NOTE: the monitor length must be multiple of sector size - * (which is common practice). - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN) - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#define CONFIG_ALTERA_UART 1 /* Use altera uart */ -#if defined(CONFIG_ALTERA_JTAG_UART) -#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ -#else -#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ -#endif - -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ -#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ - -/*------------------------------------------------------------------------ - * EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for - * epcs device access is enabled. The base address is the epcs - * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. - * The register base is currently at offset 0x600 from the memory base. - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ - -/*------------------------------------------------------------------------ - * DEBUG - *----------------------------------------------------------------------*/ -#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ - -/*------------------------------------------------------------------------ - * TIMEBASE -- - * - * The high res timer defaults to 1 msec. Since it includes the period - * registers, the interrupt frequency can be reduced using TMRCNT. - * If the default period is acceptable, TMRCNT can be left undefined. - * TMRMS represents the desired mecs per tick (msecs per interrupt). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ -#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ -#define CONFIG_SYS_NIOS_TMRCNT \ - (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) - -/*------------------------------------------------------------------------ - * STATUS LED -- Provides a simple blinking led. For Nios2 each board - * must implement its own led routines -- leds are, after all, - * board-specific, no? - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ -#define CONFIG_STATUS_LED /* Enable status driver */ - -#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ -#define STATUS_LED_STATE 1 /* Blinking */ -#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */ - -/*------------------------------------------------------------------------ - * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... - * and really doesn't need any additional clutter. So I choose the lazy - * way out to avoid changes there -- define the base address to ensure - * cache bypass so there's no need to monkey with inx/outx macros. - *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ - -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.2.21 -#define CONFIG_SERVERIP 192.168.2.16 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#undef CONFIG_CMD_BOOTD -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG - - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* Provide extended help*/ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ -#define CONFIG_SYS_MAXARGS 16 /* Max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */ -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000 - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#endif /* __CONFIG_H */ diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h deleted file mode 100644 index bfbf8c1..0000000 --- a/include/configs/EP1S10.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*------------------------------------------------------------------------ - * BOARD/CPU - *----------------------------------------------------------------------*/ -#define CONFIG_EP1S10 1 /* EP1S10 board */ -#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ - -#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */ -#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */ - -/*------------------------------------------------------------------------ - * CACHE -- the following will support II/s and II/f. The II/s does not - * have dcache, so the cache instructions will behave as NOPs. - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */ -#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */ -#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ -#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ - -/*------------------------------------------------------------------------ - * MEMORY BASE ADDRESSES - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */ -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ -#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */ -#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */ -#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB */ - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - * -Monitor at top. - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) /* 256k heap */ - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ - -/*------------------------------------------------------------------------ - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above - * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom - * of flash memory. This will keep the environment in user region - * of flash. NOTE: the monitor length must be multiple of sector size - * (which is common practice). - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#define CONFIG_ALTERA_UART 1 /* Use altera uart */ -#if defined(CONFIG_ALTERA_JTAG_UART) -#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ -#else -#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ -#endif - -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ -#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ - -/*------------------------------------------------------------------------ - * EPCS Device -- None for stratix. - *----------------------------------------------------------------------*/ -#undef CONFIG_SYS_NIOS_EPCSBASE - -/*------------------------------------------------------------------------ - * DEBUG - *----------------------------------------------------------------------*/ -#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ - -/*------------------------------------------------------------------------ - * TIMEBASE -- - * - * The high res timer defaults to 1 msec. Since it includes the period - * registers, the interrupt frequency can be reduced using TMRCNT. - * If the default period is acceptable, TMRCNT can be left undefined. - * TMRMS represents the desired mecs per tick (msecs per interrupt). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ -#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ -#define CONFIG_SYS_NIOS_TMRCNT \ - (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) - -/*------------------------------------------------------------------------ - * STATUS LED -- Provides a simple blinking led. For Nios2 each board - * must implement its own led routines -- since leds are board-specific. - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ -#define CONFIG_STATUS_LED /* Enable status driver */ - -#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ -#define STATUS_LED_STATE 1 /* Blinking */ -#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */ - -/*------------------------------------------------------------------------ - * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... - * and really doesn't need any additional clutter. So I choose the lazy - * way out to avoid changes there -- define the base address to ensure - * cache bypass so there's no need to monkey with inx/outx macros. - *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ - -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.2.21 -#define CONFIG_SERVERIP 192.168.2.16 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVES - - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* Provide extended help*/ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ -#define CONFIG_SYS_MAXARGS 16 /* Max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */ -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000 - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#endif /* __CONFIG_H */ diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h deleted file mode 100644 index 4d905fe..0000000 --- a/include/configs/EP1S40.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*------------------------------------------------------------------------ - * BOARD/CPU - *----------------------------------------------------------------------*/ -#define CONFIG_EP1S40 1 /* EP1S40 board */ -#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ - -#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */ -#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */ - -/*------------------------------------------------------------------------ - * CACHE -- the following will support II/s and II/f. The II/s does not - * have dcache, so the cache instructions will behave as NOPs. - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */ -#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */ -#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ -#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ - -/*------------------------------------------------------------------------ - * MEMORY BASE ADDRESSES - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */ -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ -#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */ -#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */ -#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB */ - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - * -Monitor at top. - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) /* 256k heap */ - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ - -/*------------------------------------------------------------------------ - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above - * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom - * of flash memory. This will keep the environment in user region - * of flash. NOTE: the monitor length must be multiple of sector size - * (which is common practice). - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#define CONFIG_ALTERA_UART 1 /* Use altera uart */ -#if defined(CONFIG_ALTERA_JTAG_UART) -#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ -#else -#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */ -#endif - -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ -#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ - -/*------------------------------------------------------------------------ - * EPCS Device -- None for stratix. - *----------------------------------------------------------------------*/ -#undef CONFIG_SYS_NIOS_EPCSBASE - -/*------------------------------------------------------------------------ - * DEBUG - *----------------------------------------------------------------------*/ -#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ - -/*------------------------------------------------------------------------ - * TIMEBASE -- - * - * The high res timer defaults to 1 msec. Since it includes the period - * registers, the interrupt frequency can be reduced using TMRCNT. - * If the default period is acceptable, TMRCNT can be left undefined. - * TMRMS represents the desired mecs per tick (msecs per interrupt). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ -#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ -#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ -#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec) */ -#define CONFIG_SYS_NIOS_TMRCNT \ - (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) - -/*------------------------------------------------------------------------ - * STATUS LED -- Provides a simple blinking led. For Nios2 each board - * must implement its own led routines -- since leds are board-specific. - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ -#define CONFIG_STATUS_LED /* Enable status driver */ - -#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ -#define STATUS_LED_STATE 1 /* Blinking */ -#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */ - -/*------------------------------------------------------------------------ - * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... - * and really doesn't need any additional clutter. So I choose the lazy - * way out to avoid changes there -- define the base address to ensure - * cache bypass so there's no need to monkey with inx/outx macros. - *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ - -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.2.21 -#define CONFIG_SERVERIP 192.168.2.16 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVES - - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* Provide extended help*/ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ -#define CONFIG_SYS_MAXARGS 16 /* Max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */ -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000 - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#endif /* __CONFIG_H */ diff --git a/include/configs/GTH.h b/include/configs/GTH.h deleted file mode 100644 index c2cf852..0000000 --- a/include/configs/GTH.h +++ /dev/null @@ -1,389 +0,0 @@ -/* - * Parameters for GTH board - * Based on FADS860T - * by thomas.lange@corelatus.com - - * A collection of structures, addresses, and values associated with - * the Motorola 860T FADS board. Copied from the MBX stuff. - * Magnus Damm added defines for 8xxrom and extended bd_info. - * Helmut Buchsbaum added bitvalues for BCSRx - * - * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) - */ - -/* - * ff000000 -> ff00ffff : IMAP internal in the cpu - * e0000000 -> ennnnnnn : pcmcia - * 98000000 -> 983nnnnn : FPGA 4MB - * 90000000 -> 903nnnnn : FPGA 4MB - * 80000000 -> 80nnnnnn : flash connected to CS0, final ( real ) location - * 00000000 -> nnnnnnnn : sdram - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#include <mpc8xx_irq.h> - -#define CONFIG_MPC860 1 -#define CONFIG_MPC860T 1 -#define CONFIG_GTH 1 - -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#define MPC8XX_FACT 3 /* Multiply by 3 */ -#define MPC8XX_XIN 16384000 /* 16.384 MHz */ -#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) - -#define CONFIG_BOOTDELAY 1 /* autoboot after 0 seconds */ - -#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */ - -#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */ - -#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */ - -/* Only interrupt boot if space is pressed */ -/* If a long serial cable is connected but */ -/* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press space to abort autoboot in %d second\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -#if 0 -/* Net boot */ -/* Loads a tftp image and starts it */ -#define CONFIG_BOOTCOMMAND "bootp;bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "panic=1" -#else -/* Compact flash boot */ -#define CONFIG_BOOTARGS "panic=1 root=/dev/hda7" -#define CONFIG_BOOTCOMMAND "disk 100000 0:5;bootm 100000" -#endif - -/* Enable watchdog */ -#define CONFIG_WATCHDOG 1 - -/* choose SCC1 ethernet (10BASET on motherboard) - * or FEC ethernet (10/100 on daughterboard) - */ -#if 1 -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ -#undef CONFIG_FEC_ENET /* disable FEC ethernet */ -#define CONFIG_SYS_DISCOVER_PHY -#else -#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ -#define CONFIG_FEC_ENET 1 /* use FEC ethernet */ -#define CONFIG_SYS_DISCOVER_PHY -#endif -#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) -#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IDE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ - -/* Default location to load data from net */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400 } - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 -#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024)) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE 0x80000000 - -#define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE - -#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#undef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 0x000E0000 -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#define CONFIG_ENV_SECT_SIZE 0x50000 /* see README - env sector total size */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*---------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ - -/*FIXME dont use for now */ -/*#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -/*#define CONFIG_SYS_RTCSC (RTCSC_RTF) */ - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) -/* PITE */ -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) - */ -#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ - -/* FIXME check values */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_RTSEL|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) - - /*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* Because of the way the 860 starts up and assigns CS0 the -* entire address space, we have to set the memory controller -* differently. Normally, you write the option register -* first, and then enable the chip select by writing the -* base register. For CS0, you must write the base register -* first, followed by the option register. -*/ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ -/* the other CS:s are determined by looking at parameters in BCSRx */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - -#define CONFIG_SYS_REMAP_OR_AM 0xFF800000 /* 4 MB OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ - -#define FPGA_2_BASE 0x90000000 -#define FPGA_3_BASE 0x98000000 - -/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) - - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 1 Mbyte until detected and only 1 Mbyte is needed*/ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16 ) - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#define CONFIG_ETHADDR DE:AD:BE:EF:00:01 /* Ethernet address */ - -#ifdef CONFIG_MPC860T - -/* Interrupt level assignments. -*/ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - -#endif /* CONFIG_MPC860T */ - -/* We don't use the 8259. -*/ -#define NR_8259_INTS 0 - -/* Machine type -*/ -#define _MACH_8xx (_MACH_gth) - -#ifdef CONFIG_MPC860 -#define PCMCIA_SLOT_A 1 -#define CONFIG_PCMCIA_SLOT_A 1 -#endif - -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ /* Force it - dont measure it */ - -#define PA_FRONT_LED ((u16)0x4) /* PA 13 */ -#define PA_FL_CONFIG ((u16)0x20) /* PA 10 */ -#define PA_FL_CE ((u16)0x1000) /* PA 3 */ - -#define PB_ID_GND ((u32)1) /* PB 31 */ -#define PB_REV_1 ((u32)2) /* PB 30 */ -#define PB_REV_0 ((u32)4) /* PB 29 */ -#define PB_BLUE_LED ((u32)0x400) /* PB 21 */ -#define PB_EEPROM ((u32)0x800) /* PB 20 */ -#define PB_ID_3 ((u32)0x2000) /* PB 18 */ -#define PB_ID_2 ((u32)0x4000) /* PB 17 */ -#define PB_ID_1 ((u32)0x8000) /* PB 16 */ -#define PB_ID_0 ((u32)0x10000) /* PB 15 */ - -/* NOTE. This is reset for 100Mbit port only */ -#define PC_ENET100_RESET ((ushort)0x0080) /* PC 8 */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h new file mode 100644 index 0000000..6cd5da7 --- /dev/null +++ b/include/configs/MPC8308RDB.h @@ -0,0 +1,560 @@ +/* + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. + * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ +#define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ + +#define CONFIG_MISC_INIT_R + +/* + * On-board devices + * + * TSEC1 is SoC TSEC + * TSEC2 is VSC switch + */ +#define CONFIG_TSEC1 +#define CONFIG_VSC7385_ENET + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +/* + * Hardware Reset Configuration Word + * if CLKIN is 66.66MHz, then + * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz + * We choose the A type silicon as default, so the core is 400Mhz. + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_SVCOD_DIV_2 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_CORE_TO_CSB_3X1) +/* + * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits + * in 8308's HRCWH according to the manual, but original Freescale's + * code has them and I've expirienced some problems using the board + * with BDI3000 attached when I've tried to set these bits to zero + * (UART doesn't work after the 'reset run' command). + */ +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN) + +/* + * System IO Config + */ +#define CONFIG_SYS_SICRH 0x01b7d103 +#define CONFIG_SYS_SICRL 0x00000040 /* 3.3V, no delay */ + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CONFIG_SYS_IMMR 0xE0000000 + +/* + * SERDES + */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 + +/* + * Arbiter Setup + */ +#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ +#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ + | DDRCDR_PZ_LOZ \ + | DDRCDR_NZ_LOZ \ + | DDRCDR_ODT \ + | DDRCDR_Q_DRN) + /* 0x7b880001 */ +/* + * Manually set up DDR parameters + * consist of two chips HY5PS12621BFP-C4 from HYNIX + */ + +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ + +#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ + | 0x00010000 /* ODT_WR to CSn */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) + /* 0x80010102 */ +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ + | (0 << TIMING_CFG0_WRT_SHIFT) \ + | (0 << TIMING_CFG0_RRT_SHIFT) \ + | (0 << TIMING_CFG0_WWT_SHIFT) \ + | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ + | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) + /* 0x00220802 */ +#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ + | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \ + | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ + | (5 << TIMING_CFG1_CASLAT_SHIFT) \ + | (6 << TIMING_CFG1_REFREC_SHIFT) \ + | (2 << TIMING_CFG1_WRREC_SHIFT) \ + | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ + | (2 << TIMING_CFG1_WRTORD_SHIFT)) + /* 0x27256222 */ +#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ + | (4 << TIMING_CFG2_CPO_SHIFT) \ + | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ + | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ + | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ + | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ + | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) + /* 0x121048c5 */ +#define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) + /* 0x03600100 */ +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_32_BE) + /* 0x43080000 */ + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ +#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \ + | (0x0232 << SDRAM_MODE_SD_SHIFT)) + /* ODT 150ohm CL=3, AL=1 on SDRAM */ +#define CONFIG_SYS_DDR_MODE2 0x00000000 + +/* + * Memory test + */ +#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x07f00000 + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 +#define CONFIG_SYS_LBC_LBCR 0x00040000 + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ + +/* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */ + +#define CONFIG_SYS_BR0_PRELIM (\ + CONFIG_SYS_FLASH_BASE /* Flash Base address */ |\ + (2 << BR_PS_SHIFT) /* 16 bit port size */ |\ + BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +/* 127 64KB sectors and 8 8KB top sectors per device */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +/* + * NAND Flash on the Local Bus + */ +#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ +#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ + +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ + +#ifdef CONFIG_VSC7385_ENET +#define CONFIG_TSEC2 +#define CONFIG_SYS_VSC7385_BASE 0xF0000000 +#define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ +#define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ +/* Access window base at VSC7385 base */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE +/* Access window size 128K */ +#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFE7FE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 +#endif +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES {{0x51}} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 + + +/* + * Board info - revision and where boot from + */ +#define CONFIG_SYS_I2C_PCF8574A_ADDR 0x39 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCIE1_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 +#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 + +/* + * Fake PCIE2 definitions: there is no PCIE2 on this board but the code + * in arch/powerpc/cpu/mpc83xx/pcie.c doesn't compile without this + */ +#define CONFIG_SYS_PCIE2_BASE 0xC0000000 +#define CONFIG_SYS_PCIE2_MEM_BASE 0xC0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC0000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCIE2_CFG_BASE 0xD0000000 +#define CONFIG_SYS_PCIE2_CFG_SIZE 0x01000000 +#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xD1000000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 + +#define CONFIG_PCI +#define CONFIG_PCIE + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 + +/* + * TSEC + */ +#define CONFIG_NET_MULTI +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) +#define CONFIG_SYS_TSEC2_OFFSET 0x25000 +#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) + +/* + * TSEC ethernet configuration + */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2_NAME "eTSEC1" +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: eTSEC[0-1] */ +#define CONFIG_ETHPRIME "eTSEC0" + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) +#define CONFIG_SYS_HID2 HID2_HBE + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U + +/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ + BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=${consoledev},${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ + "kernel_addr=FE080000\0" \ + "fdt_addr=FE280000\0" \ + "ramdisk_addr=FE290000\0" \ + "u-boot=mpc8308rdb/u-boot.bin\0" \ + "kernel_addr_r=1000000\0" \ + "fdt_addr_r=C00000\0" \ + "hostname=mpc8308rdb\0" \ + "bootfile=mpc8308rdb/uImage\0" \ + "fdtfile=mpc8308rdb/mpc8308rdb.dtb\0" \ + "rootpath=/opt/eldk-4.2/ppc_6xx\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${fdt_addr_r} ${fdtfile};" \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "bootcmd=run flash_self\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};cp.b ${fileaddr} " \ + xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 9a40adc..524afa5 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -36,6 +36,7 @@ #define CONFIG_MPC8313ERDB 1 #define CONFIG_PCI +#define CONFIG_FSL_ELBC 1 #define CONFIG_MISC_INIT_R diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 6972fe8..f1b110b 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -197,6 +197,7 @@ #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00040000 +#define CONFIG_FSL_ELBC 1 /* * FLASH on the Local Bus diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b30d0e3..9092755 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -223,6 +223,7 @@ #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 +#define CONFIG_FSL_ELBC 1 /* * FLASH on the Local Bus diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1654f46..79dadc4 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -246,6 +246,7 @@ #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 +#define CONFIG_FSL_ELBC 1 /* * FLASH on the Local Bus diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index da4313a..890a6c9 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2009,2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT 1 #endif @@ -63,6 +65,7 @@ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ @@ -70,15 +73,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default. @@ -129,11 +126,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 @@ -669,6 +661,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 95ea275..7daf934 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -294,6 +294,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index e945da2..ae4fba8 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -403,6 +403,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 799d946..96fd024 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -79,11 +79,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -420,6 +415,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 3eb0049..23594a7 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -80,10 +80,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -462,6 +458,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 07a8e61..5011e5a 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -401,6 +401,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 4a4a9ed..98677e5 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -416,6 +416,7 @@ #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6973538..bc6c5c7 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -75,9 +75,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -421,6 +418,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 0c43b2b..92c2b49 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -103,9 +103,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -539,6 +536,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 78b7369..51e5d06 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2008 Freescale Semiconductor, Inc. + * Copyright 2007-2008,2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT #endif @@ -53,15 +55,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default. @@ -93,10 +89,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 @@ -574,6 +566,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 8382e3c..4d9606e 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -82,10 +82,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) - #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR+0x2c000) /* DDR Setup */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 94e4d24..0d1f779 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -1,5 +1,5 @@ /* - * Copyright 2006 Freescale Semiconductor. + * Copyright 2006, 2010 Freescale Semiconductor. * * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -58,8 +58,8 @@ #ifndef CONFIG_RIO /* RIO/PCI are mutually exclusive */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ -#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (ULI bridge) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #endif @@ -122,9 +122,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) - /* * DDR Setup */ @@ -328,43 +325,43 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Addresses are mapped 1-1. */ -#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCI1_MEM_PHYS 0x0000000c00000000ULL +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x0000000c00000000ULL #else -#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_VIRT -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_VIRT +#define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_VIRT #endif -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCI1_IO_PHYS (CONFIG_SYS_PCI1_IO_VIRT \ +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_PHYS (CONFIG_SYS_PCIE1_IO_VIRT \ | CONFIG_SYS_PHYS_ADDR_HIGH) -#define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */ +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */ #ifdef CONFIG_PHYS_64BIT /* - * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT. + * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT. * This will increase the amount of PCI address space available for * for mapping RAM. */ -#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI1_MEM_BUS +#define CONFIG_SYS_PCIE2_MEM_BUS CONFIG_SYS_PCIE1_MEM_BUS #else -#define CONFIG_SYS_PCI2_MEM_BUS (CONFIG_SYS_PCI1_MEM_BUS \ - + CONFIG_SYS_PCI1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_BUS (CONFIG_SYS_PCIE1_MEM_BUS \ + + CONFIG_SYS_PCIE1_MEM_SIZE) #endif -#define CONFIG_SYS_PCI2_MEM_VIRT (CONFIG_SYS_PCI1_MEM_VIRT \ - + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI2_MEM_PHYS (CONFIG_SYS_PCI1_MEM_PHYS \ - + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \ - + CONFIG_SYS_PCI1_IO_SIZE) -#define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS \ - + CONFIG_SYS_PCI1_IO_SIZE) -#define CONFIG_SYS_PCI2_IO_SIZE CONFIG_SYS_PCI1_IO_SIZE +#define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \ + + CONFIG_SYS_PCIE1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \ + + CONFIG_SYS_PCIE1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \ + + CONFIG_SYS_PCIE1_IO_SIZE) +#define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \ + + CONFIG_SYS_PCIE1_IO_SIZE) +#define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE #if defined(CONFIG_PCI) @@ -393,10 +390,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 /*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_VIRT +#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT /*PCI video card used*/ -/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ +/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT*/ /* video */ #define CONFIG_VIDEO @@ -409,7 +406,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ATI_RADEON_FB #define CONFIG_VIDEO_LOGO /*#define CONFIG_CONSOLE_CURSOR*/ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT #endif #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ @@ -425,8 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE #endif -#define CONFIG_MPC86XX_PCI2 - #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) @@ -497,17 +492,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U /* if CONFIG_PCI: - * BAT2 PCI1 and PCI1 MEM + * BAT2 PCIE1 and PCIE1 MEM * if CONFIG_RIO * BAT2 Rapidio Memory */ #ifdef CONFIG_PCI -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G \ +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \ +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #else /* CONFIG_RIO */ @@ -556,14 +551,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* - * BAT4 PCI1_IO and PCI2_IO + * BAT4 PCIE1_IO and PCIE2_IO */ -#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \ +#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \ +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \ +#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h new file mode 100644 index 0000000..f9d12f5 --- /dev/null +++ b/include/configs/P1022DS.h @@ -0,0 +1,467 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/freescale/common/ics307_clk.h" + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ +#define CONFIG_P1022 +#define CONFIG_P1022DS +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ + +#define CONFIG_PHYS_64BIT +#define CONFIG_ENABLE_36BIT_PHYS +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() +#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x7fffffff + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR + +/* DDR Setup */ +#define CONFIG_DDR_SPD +#define CONFIG_VERY_BIG_RAM +#define CONFIG_FSL_DDR3 + +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +/* I2C addresses of SPD EEPROMs */ +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ + +/* + * Memory map + * + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable + * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable + * + * Localbus cacheable (TBD) + * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable + * + * Localbus non-cacheable + * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable + * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable + * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull + +#define CONFIG_FLASH_BR_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) +#define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ + +#define CONFIG_SYS_BR1_PRELIM \ + (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM + +#define CONFIG_SYS_FLASH_BANKS_LIST \ + {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_MAX_FLASH_SECT 1024 + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_FSL_NGPIXIS +#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ +#define PIXIS_BASE_PHYS 0xfffdf0000ull + +#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) + +#define PIXIS_LBMAP_SWITCH 7 +#define PIXIS_LBMAP_MASK 0xE0 +#define PIXIS_LBMAP_ALTBANK 0x20 + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) + +/* Video */ +/* #define CONFIG_VIDEO */ +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#endif + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 + +/* + * I2C2 EEPROM + */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_BUS_NUM 1 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, Slot 2, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 3, Base address b000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#endif + +/* SATA */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#define CONFIG_MMC +#ifdef CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_GENERIC_MMC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_TSEC_ENET +#ifdef CONFIG_TSEC_ENET + +#define CONFIG_TSECV2 +#define CONFIG_NET_MULTI + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +#define TSEC1_PHY_ADDR 1 +#define TSEC2_PHY_ADDR 2 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 + +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * USB + */ +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_HZ 1000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_HOSTNAME p1022ds +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define CONFIG_BOOTARGS + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "perf_mode=stable\0" \ + "memctl_intlv_ctl=2\0" \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=uramdisk\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p1022ds.dtb\0" \ + "bdev=sda3\0" \ + "diuregs=md e002c000 1d\0" \ + "dium=mw e002c01c\0" \ + "diuerr=md e002c014 1\0" \ + "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 tty0\0" \ + "monitor=0-DVI\0" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index b891730..fca3cdd 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -74,6 +74,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_E1000 1 /* E1000 pci Ethernet card*/ #ifndef __ASSEMBLY__ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif @@ -84,6 +85,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MP #endif +#define CONFIG_HWCONFIG + /* * These can be toggled for performance analysis, otherwise use default. */ @@ -126,9 +129,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -475,6 +475,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_NET diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 66be725..bf2acbf 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT #endif @@ -54,17 +56,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long calculate_board_sys_clk(unsigned long dummy); -extern unsigned long calculate_board_ddr_clk(unsigned long dummy); -/* extern unsigned long get_board_sys_clk(unsigned long dummy); */ -/* extern unsigned long get_board_ddr_clk(unsigned long dummy); */ -#endif -#define CONFIG_SYS_CLK_FREQ calculate_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ calculate_board_ddr_clk(0) /* ddrclk for MPC85xx */ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default. @@ -96,10 +90,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR3 1 @@ -553,6 +543,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 4b9bcca..7426bca 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -326,6 +326,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 1db20bc..0bd28fc 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -325,6 +325,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_DATE #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 1989e5a..5d424dd 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -380,6 +380,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index eb8657b..70b7489 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -37,6 +37,7 @@ #define CONFIG_MPC8313 1 #define CONFIG_PCI +#define CONFIG_FSL_ELBC 1 #define CONFIG_MISC_INIT_R diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d44fb07..d8f2602 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -137,10 +137,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) - /* * DDR Setup */ @@ -593,6 +589,7 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_DTT #define CONFIG_CMD_MII +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index c63fd42..8770a8d 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -97,8 +97,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* * Diagnostics diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 1a56c60..83aeffd 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) /* * Diagnostics @@ -338,6 +337,7 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP +#define CONFIG_CMD_REGINFO /* * Miscellaneous configurable options diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 7fd3668..fc4a986 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -47,6 +47,7 @@ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_FSL_ELBC 1 /* * Multicore config @@ -98,8 +99,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* * Diagnostics @@ -396,6 +395,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP +#define CONFIG_CMD_REGINFO /* * Miscellaneous configurable options diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 513d005..10af21b 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -28,7 +28,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */ diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 1e821d9..6eec1c9 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -63,6 +63,26 @@ #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__) #define ADI_CMDS_NETWORK 1 #define CONFIG_BFIN_MAC +#define CONFIG_BFIN_MAC_PINS \ + { \ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_CRS, \ + P_MII0_MDC, \ + P_MII0_MDIO, \ + 0 } #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 #endif @@ -117,8 +137,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 711fa27..82396d0 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -134,8 +134,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* @@ -160,23 +158,19 @@ /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ #ifdef CONFIG_STATUS_LED +#define CONFIG_GPIO_LED #define CONFIG_BOARD_SPECIFIC_LED -#ifndef __ASSEMBLY__ -typedef unsigned int led_id_t; -void __led_init(led_id_t mask, int state); -void __led_set(led_id_t mask, int state); -void __led_toggle(led_id_t mask); -#endif /* use LED0 to indicate booting/alive */ #define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT 1 +#define STATUS_LED_BIT GPIO_PF8 #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) /* use LED1 to indicate crash */ #define STATUS_LED_CRASH 1 -#define STATUS_LED_BIT1 2 +#define STATUS_LED_BIT1 GPIO_PG11 #define STATUS_LED_STATE1 STATUS_LED_ON #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* #define STATUS_LED_BIT2 GPIO_PG12 */ #endif diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h new file mode 100644 index 0000000..eb3a2b7 --- /dev/null +++ b/include/configs/bf527-ad7160-eval.h @@ -0,0 +1,148 @@ +/* + * U-boot - Configuration file for BF527 AD7160-EVAL board + */ + +#ifndef __CONFIG_BF527_AD7160_EVAL_H__ +#define __CONFIG_BF527_AD7160_EVAL_H__ + +#include <asm/config-pre.h> + + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf527-0.2 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER + + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 24000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 25 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 10 +#define CONFIG_MEM_SIZE 64 + +#define CONFIG_EBIU_SDRRC_VAL 0x03F6 +#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS) + +#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) +#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) +#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (640 * 1024) + + +/* + * NAND Settings + * (can't be used same time as ethernet) + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +# define CONFIG_BFIN_NFC +# define CONFIG_BFIN_NFC_BOOTROM_ECC +#endif +#ifdef CONFIG_BFIN_NFC +#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 +#define CONFIG_DRIVER_NAND_BFIN +#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#endif + + +/* + * Flash Settings + */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0x20000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 259 + + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + + +/* + * I2C Settings + */ +#define CONFIG_BFIN_TWI_I2C 1 +#define CONFIG_HARD_I2C 1 + + +/* + * SPI_MMC Settings + */ +#define CONFIG_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_SPI_MMC +#define CONFIG_SPI_MMC_DEFAULT_CS (7 + GPIO_PH3) + + +/* + * Misc Settings + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_UART_CONSOLE 0 + + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> + +#endif diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 7800c32..07e4ce8 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -138,8 +138,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index c80ddca..37a7059 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -136,8 +136,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 80c4884..02c8bc3 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -180,8 +180,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif @@ -230,23 +228,19 @@ /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ #ifdef CONFIG_STATUS_LED +#define CONFIG_GPIO_LED #define CONFIG_BOARD_SPECIFIC_LED -#ifndef __ASSEMBLY__ -typedef unsigned int led_id_t; -void __led_init(led_id_t mask, int state); -void __led_set(led_id_t mask, int state); -void __led_toggle(led_id_t mask); -#endif -/* use LED1 to indicate booting/alive */ +/* use LED0 to indicate booting/alive */ #define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT 1 +#define STATUS_LED_BIT GPIO_PF2 #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) -/* use LED2 to indicate crash */ +/* use LED1 to indicate crash */ #define STATUS_LED_CRASH 1 -#define STATUS_LED_BIT1 2 +#define STATUS_LED_BIT1 GPIO_PF3 #define STATUS_LED_STATE1 STATUS_LED_ON #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* #define STATUS_LED_BIT2 GPIO_PF4 */ #endif /* define to enable splash screen support */ diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index cf40d06..39bbb41 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -132,7 +132,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_READY PF12 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -141,13 +140,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTHIO() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \ - bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \ - bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() | BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF12 /* @@ -155,8 +148,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 92ceb38..96704d7 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -137,8 +137,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* @@ -157,7 +155,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_READY PF3 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -166,13 +163,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \ - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \ - bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 /* @@ -268,8 +259,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -/* #define CONFIG_BF537_STAMP_LEDCMD 1 */ - /* Define if want to do post memory test */ #undef CONFIG_POST #ifdef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 59e0565..1c14b6b 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -134,8 +134,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index f9c9711..60cca0c 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -140,8 +140,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 0be170c..0c0204f 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -131,7 +131,6 @@ #define CONFIG_ENV_SECT_SIZE (1056 * 8) #define CONFIG_ENV_OFFSET ((16 + 256) * 1056) #define CONFIG_ENV_SIZE (8 * 1056) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) /* @@ -145,7 +144,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3)) -#define BFIN_NAND_READY PF10 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -154,12 +152,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO0_FLAG_D() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() & ~BFIN_NAND_READY); \ - bfin_write_FIO0_INEN(bfin_read_FIO0_INEN() | BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 /* diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1e3fdef..036bfe4 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -151,8 +151,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 1896cf5..901a32f 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -83,6 +83,7 @@ # define CONFIG_CMD_CPLBINFO # define CONFIG_CMD_ELF # define CONFIG_ELF_SIMPLE_LOAD +# define CONFIG_CMD_GPIO # define CONFIG_CMD_KGDB # define CONFIG_CMD_REGINFO # define CONFIG_CMD_STRINGS @@ -247,12 +248,26 @@ # define CONFIG_SYS_AUTOLOAD "no" # endif # endif +# define CONFIG_IP_DEFRAG # define CONFIG_NET_RETRY_COUNT 20 #endif /* + * I2C Settings + */ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +# ifndef CONFIG_SYS_I2C_SPEED +# define CONFIG_SYS_I2C_SPEED 50000 +# endif +# ifndef CONFIG_SYS_I2C_SLAVE +# define CONFIG_SYS_I2C_SLAVE 0 +# endif +#endif + +/* * Misc Settings */ +#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #endif diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index ac9b3c5..6fe7639 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -77,6 +77,13 @@ #define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000 #define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000 +/* + * BCSR bits as defined in the Canyonlands board user manual. + */ +#define BCSR_USBCTRL_OTG_RST 0x32 +#define BCSR_USBCTRL_HOST_RST 0x01 +#define BCSR_SELECT_PCIE 0x10 + #define CONFIG_SYS_PCIE0_UTLBASE 0xc08010000ULL /* 36bit physical addr */ /* base address of inbound PCIe window */ @@ -417,6 +424,7 @@ #define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_AHB_BASE | 0xd0000) #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +#define CONFIG_SYS_USB_OHCI_BOARD_INIT #endif /* diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index ad1dd12..e0c6d53 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -117,8 +117,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 8d0bc12..742df9c 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -119,8 +119,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index bbea3ab..9def99f 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -120,8 +120,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 93c4c8d..63b9399 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -107,8 +107,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h new file mode 100644 index 0000000..277ff67 --- /dev/null +++ b/include/configs/colibri_pxa270.h @@ -0,0 +1,278 @@ +/* + * Toradex Colibri PXA270 configuration file + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Board Configuration Options + */ +#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ + +#undef BOARD_LATE_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/* + * Environment settings + */ +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_ENV_OVERWRITE /* override default environment */ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ + "bootm 0xa0000000; " \ + "fi; " \ + "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ + "bootm 0xa0000000; " \ + "fi; " \ + "bootm 0x80000;" +#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" +#define CONFIG_TIMESTAMP +#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS + +#define CONFIG_LZMA /* LZMA compression support */ + +/* + * Serial Console Configuration + */ +#define CONFIG_PXA_SERIAL +#define CONFIG_FFUART 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Bootloader Components Configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_USB +#define CONFIG_CMD_FLASH + +/* + * Networking Configuration + * chip on the Voipac PXA270 board + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#define CONFIG_NET_MULTI 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000000 +#define DM9000_IO (CONFIG_DM9000_BASE) +#define DM9000_DATA (CONFIG_DM9000_BASE + 4) +#define CONFIG_NET_RETRY_COUNT 10 + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#endif + +/* + * MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_PXA_MMC +#define CONFIG_SYS_MMC_BASE 0xF0000000 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * KGDB + */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * HUSH Shell Configuration + */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 + +/* + * Clock Configuration + */ +#undef CONFIG_SYS_CLKS_IN_HZ +#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ +#define CONFIG_SYS_CPUSPEED 0x290 /* 520 MHz */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * DRAM Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ +#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ + +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR (0xa1000000) + +/* + * NOR FLASH + */ +#ifdef CONFIG_CMD_FLASH +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 + +#define CONFIG_ENV_IS_IN_FLASH 1 + +#else /* No flash */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ENV_IS_NOWHERE +#endif + +#define CONFIG_SYS_MONITOR_BASE 0x000000 +#define CONFIG_SYS_MONITOR_LEN 0x40000 + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + + +/* + * GPIO settings + */ +#define CONFIG_SYS_GPSR0_VAL 0x00000000 +#define CONFIG_SYS_GPSR1_VAL 0x00020000 +#define CONFIG_SYS_GPSR2_VAL 0x0002C000 +#define CONFIG_SYS_GPSR3_VAL 0x00000000 + +#define CONFIG_SYS_GPCR0_VAL 0x00000000 +#define CONFIG_SYS_GPCR1_VAL 0x00000000 +#define CONFIG_SYS_GPCR2_VAL 0x00000000 +#define CONFIG_SYS_GPCR3_VAL 0x00000000 + +#define CONFIG_SYS_GPDR0_VAL 0x08000000 +#define CONFIG_SYS_GPDR1_VAL 0x0002A981 +#define CONFIG_SYS_GPDR2_VAL 0x0202FC00 +#define CONFIG_SYS_GPDR3_VAL 0x00000000 + +#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 +#define CONFIG_SYS_GAFR0_U_VAL 0x00C00010 +#define CONFIG_SYS_GAFR1_L_VAL 0x999A901A +#define CONFIG_SYS_GAFR1_U_VAL 0xAAA00008 +#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA +#define CONFIG_SYS_GAFR2_U_VAL 0x0109A000 +#define CONFIG_SYS_GAFR3_L_VAL 0x54000300 +#define CONFIG_SYS_GAFR3_U_VAL 0x00024001 + +#define CONFIG_SYS_PSSR_VAL 0x30 + +/* + * Clock settings + */ +#define CONFIG_SYS_CKEN 0x00500240 +#define CONFIG_SYS_CCCR 0x02000290 + +/* + * Memory settings + */ +#define CONFIG_SYS_MSC0_VAL 0x000095f2 +#define CONFIG_SYS_MSC1_VAL 0x00007ff4 +#define CONFIG_SYS_MSC2_VAL 0x00000000 +#define CONFIG_SYS_MDCNFG_VAL 0x08000ac9 +#define CONFIG_SYS_MDREFR_VAL 0x2013e01e +#define CONFIG_SYS_MDMRS_VAL 0x00320032 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CONFIG_SYS_MECR_VAL 0x00000001 +#define CONFIG_SYS_MCMEM0_VAL 0x00014307 +#define CONFIG_SYS_MCMEM1_VAL 0x00014307 +#define CONFIG_SYS_MCATT0_VAL 0x0001c787 +#define CONFIG_SYS_MCATT1_VAL 0x0001c787 +#define CONFIG_SYS_MCIO0_VAL 0x0001430f +#define CONFIG_SYS_MCIO1_VAL 0x0001430f + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "tdex270" +#define CONFIG_USB_STORAGE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index b4fda76..049298c 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -131,15 +131,12 @@ (CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024) #define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI #define CONFIG_DRIVER_AT91EMAC 1 #define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif +#define CONFIG_RMII 1 +#define CONFIG_MII 1 +#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1 #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII 1 -#define CONFIG_PHY_ADDRESS (1 << 5) #define CONFIG_KS8721_PHY 1 #define CONFIG_SYS_FLASH_CFI 1 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 1076de6..2815771 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -32,7 +32,7 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index c3d95a0..055931c 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -131,12 +131,23 @@ * Commands configuration - using default command set for now */ #include <config_cmd_default.h> + /* - * Disabling some default commands for staggered bring-up + * Network */ -#undef CONFIG_CMD_BOOTD /* no bootd since no net */ -#undef CONFIG_CMD_NET /* no net since no eth */ -#undef CONFIG_CMD_NFS /* no NFS since no net */ + +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE /* Enable Marvell GbE Driver */ +#define CONFIG_MVGBE_PORTS {1} /* enable port 0 only */ +#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */ +#define CONFIG_PHY_BASE_ADR 0x8 +#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#endif /* * Environment variables configurations diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 2fbc6ad..eb3fa57 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -172,9 +172,9 @@ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ #define CONFIG_CMD_MII -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */ +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv88e1121 PHY */ diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 2eef5ef..2c0a263 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -58,6 +58,18 @@ /* + * Network Settings + */ +#define ADI_CMDS_NETWORK 1 +#define CONFIG_NET_MULTI +#define CONFIG_DRIVER_AX88180 1 +#define AX88180_BASE 0x2c000000 +#define CONFIG_HOSTNAME ibf-dsp561 +/* Uncomment next line to use fixed MAC address */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ + + +/* * Flash Settings */ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ @@ -126,8 +138,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 425a745..c024d78 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -116,7 +116,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_READY PF10 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -125,14 +124,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO_FLAG_D() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() & ~BFIN_NAND_READY); \ - bfin_write_FIO_INEN(bfin_read_FIO_INEN() | BFIN_NAND_READY); \ - bfin_write_FIO_EDGE(bfin_read_FIO_EDGE() & ~BFIN_NAND_READY); \ - bfin_write_FIO_POLAR(bfin_read_FIO_POLAR() & ~BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 /* diff --git a/include/configs/katmai.h b/include/configs/katmai.h index fb8ccae..76e9a76 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -202,6 +202,7 @@ */ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE +#define CONFIG_CMD_ECCTEST #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_PCI diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index a928c2c..6519c90 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -127,9 +127,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */ diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h index 96b4d1c..9ef03a6 100644 --- a/include/configs/mv88f6281gtw_ge.h +++ b/include/configs/mv88f6281gtw_ge.h @@ -172,9 +172,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index e018b21..ae5a791 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -31,7 +31,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index af7c65a..c4aa220 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -36,7 +36,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index b441831..3a3b389 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -23,7 +23,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 9eba003..3308ace 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -26,7 +26,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index d4482d3..5439aa3 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -36,7 +36,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 1e88dc0..f612e0f 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -32,7 +32,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index be9daf4..aaf929e 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -33,7 +33,7 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h new file mode 100644 index 0000000..b1e40a3 --- /dev/null +++ b/include/configs/omap4_panda.h @@ -0,0 +1,220 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated. + * Steve Sakoman <steve@sakoman.com> + * + * Configuration settings for the TI OMAP4 Panda board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP44XX 1 /* which is a 44XX */ +#define CONFIG_OMAP4430 1 /* which is in a 4430 */ +#define CONFIG_PANDA 1 /* working with Panda */ + +/* Get CPU defs */ +#include <asm/arch/cpu.h> +#include <asm/arch/omap4.h> + +/* Display CPU and Board Info */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Keep L2 Cache Disabled */ +#define CONFIG_L2_OFF 1 + +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + * Total Size Environment - 256k + * Malloc - add 256k + */ +#define CONFIG_ENV_SIZE (256 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ +/* Vector Base */ +#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE + +/* + * Hardware drivers + */ + +/* + * serial port - NS16550 compatible + */ +#define V_NS16550_CLK 48000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* I2C */ +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_I2C_MULTI_BUS 1 + +/* MMC */ +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_SYS_MMC_SET_DEV 1 +#define CONFIG_DOS_PARTITION 1 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH 1 + +/* commands to include */ +#include <config_cmd_default.h> + +/* Enabled commands */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ + +/* Disabled commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +/* + * Enabling relocation of u-boot by default + * Relocation can be skipped if u-boot is copied to the TEXT_BASE + */ +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Environment setup + */ + +/* allow overwriting serial config and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "mmcdev=1\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "fi" + +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Panda # " +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* + * memtest setup + */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT1_BASE +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ +#endif + +/* + * SDRAM Memory Map + * Even though we use two CS all the memory + * is mapped to one contiguous block + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h new file mode 100644 index 0000000..8121554 --- /dev/null +++ b/include/configs/omap4_sdp4430.h @@ -0,0 +1,221 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated. + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * Configuration settings for the TI SDP4430 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP44XX 1 /* which is a 44XX */ +#define CONFIG_OMAP4430 1 /* which is in a 4430 */ +#define CONFIG_4430SDP 1 /* working with SDP */ + +/* Get CPU defs */ +#include <asm/arch/cpu.h> +#include <asm/arch/omap4.h> + +/* Display CPU and Board Info */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Keep L2 Cache Disabled */ +#define CONFIG_L2_OFF 1 + +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + * Total Size Environment - 256k + * Malloc - add 256k + */ +#define CONFIG_ENV_SIZE (256 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ +/* Vector Base */ +#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE + +/* + * Hardware drivers + */ + +/* + * serial port - NS16550 compatible + */ +#define V_NS16550_CLK 48000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* I2C */ +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_I2C_MULTI_BUS 1 + +/* MMC */ +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_SYS_MMC_SET_DEV 1 +#define CONFIG_DOS_PARTITION 1 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH 1 + +/* commands to include */ +#include <config_cmd_default.h> + +/* Enabled commands */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ + +/* Disabled commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +/* + * Enabling relocation of u-boot by default + * Relocation can be skipped if u-boot is copied to the TEXT_BASE + */ +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Environment setup + */ + +/* allow overwriting serial config and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "mmcdev=1\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "fi" + +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "OMAP4430 SDP # " +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* + * memtest setup + */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT1_BASE +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ +#endif + +/* + * SDRAM Memory Map + * Even though we use two CS all the memory + * is mapped to one contiguous block + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h index d2f4502..52fa73d 100644 --- a/include/configs/openrd_base.h +++ b/include/configs/openrd_base.h @@ -183,9 +183,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0x8 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h index 3d8e25c..5857301 100644 --- a/include/configs/rd6281a.h +++ b/include/configs/rd6281a.h @@ -171,8 +171,8 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE #define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */ #define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index b2bf96a..c8ea8fd 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -28,7 +28,7 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ #define CONFIG_S5PC110 1 /* which is in a S5PC110 */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index aeac2de..c8b8d0d 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -109,10 +109,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -487,6 +483,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_ELF +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index dab4f80..53d06ed 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -382,6 +382,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 315eebe..618513a 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -56,8 +56,8 @@ #define CONFIG_SYS_SCRATCH_VA 0xe8000000 #define CONFIG_PCI 1 /* Enable PCIE */ -#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ @@ -108,9 +108,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) - /* * DDR Setup */ @@ -307,23 +304,23 @@ * General PCI * Addresses are mapped 1-1. */ -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS 0xe2000000 -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS -#define CONFIG_SYS_PCI1_IO_VIRT CONFIG_SYS_PCI1_IO_BUS -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS -#define CONFIG_SYS_PCI2_MEM_VIRT CONFIG_SYS_PCI2_MEM_BUS -#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_IO_BUS 0xe3000000 -#define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BUS -#define CONFIG_SYS_PCI2_IO_VIRT CONFIG_SYS_PCI2_IO_BUS -#define CONFIG_SYS_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS +#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000 +#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS +#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS +#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */ + +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS +#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000 +#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS +#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS +#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */ #if defined(CONFIG_PCI) @@ -409,10 +406,10 @@ * 0xa000_0000 512M PCI-Express 2 Memory * Changed it for operating from 0xd0000000 */ -#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ +#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U /* @@ -452,10 +449,10 @@ * 0xe300_0000 16M PCI-Express 2 I/0 * Note that this is at 0xe0000000 */ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \ +#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U /* diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index e9edc44..c5de86e 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -174,9 +174,9 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi ove miiphy interface */ -#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ -#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 09bce6d..76a47c4 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -32,7 +32,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ #define CONFIG_S5PC100 1 /* which is in a S5PC100 */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 89f7cc4..ad70109 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -355,6 +355,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 86b231c..891d2bf 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -321,6 +321,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_SYS_RAMBOOT) #undef CONFIG_CMD_SAVEENV diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 2783f9e..363f7b4 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -353,6 +353,7 @@ #define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 0ecc5b1..b38886b 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -74,8 +74,8 @@ #define CONFIG_SYS_FLASH_SIZE (64 << 20) #define CONFIG_SYS_FPGA1_BASE 0xe0000000 -#define CONFIG_SYS_FPGA2_BASE 0xe0100000 -#define CONFIG_SYS_FPGA3_BASE 0xe0200000 +#define CONFIG_SYS_FPGA2_BASE 0xe2000000 +#define CONFIG_SYS_FPGA3_BASE 0xe4000000 #define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */ #define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4 @@ -84,14 +84,12 @@ (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \ | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L) -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */ +#define CONFIG_SYS_OCM_BASE 0xE7000000 /* OCM: 64k */ #define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 #define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */ -#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */ - /* * Initial RAM & stack pointer (placed in OCM) */ @@ -121,6 +119,7 @@ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */ +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ @@ -144,10 +143,13 @@ /* * DDR2 SDRAM */ +#define CONFIG_SYS_MBYTES_SDRAM 256 +#define CONFIG_DDR_ECC #define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A +#define CONFIG_DDR_RFDC_FIXED 0x000001D7 /* optimal value */ /* DDR1/2 SDRAM Device Control Register Data Values */ /* Memory Queue */ @@ -162,9 +164,6 @@ #define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80 #define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000 -#define CONFIG_DDR_ECC -#define CONFIG_SYS_MBYTES_SDRAM 256 - #define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK /* DDR1/2 SDRAM Device Control Register Data Values */ @@ -360,6 +359,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CHIP_CONFIG +#define CONFIG_CMD_ECCTEST #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM @@ -417,7 +417,7 @@ #define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -426,7 +426,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_32MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) @@ -434,7 +434,7 @@ #define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -443,7 +443,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_16MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) @@ -451,7 +451,7 @@ #define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -460,7 +460,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_16MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 9c04d8a..52055e8 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -106,8 +106,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 409a042..24ce8f8 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -120,8 +120,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h new file mode 100644 index 0000000..1589913 --- /dev/null +++ b/include/configs/ve8313.h @@ -0,0 +1,511 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * ve8313 board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83xx 1 +#define CONFIG_MPC831x 1 +#define CONFIG_MPC8313 1 +#define CONFIG_VE8313 1 + +#define CONFIG_PCI 1 + +#define CONFIG_BOARD_EARLY_INIT_F 1 + +/* + * On-board devices + * + */ +#define CONFIG_83XX_CLKIN 32000000 /* in Hz */ + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_SYS_IMMR 0xE0000000 + +#define CONFIG_SYS_MEMTEST_START 0x00001000 +#define CONFIG_SYS_MEMTEST_END 0x07000000 + +#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */ + +/* + * Device configurations + */ + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * have the SPD connected to I2C. + */ +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ +#define CONFIG_SYS_DDR_CONFIG ( CSCONFIG_EN \ + | CSCONFIG_AP \ + | 0x00040000 /* TODO */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + /* 0x80840102 */ + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 3 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 2 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x0e720802 */ +#define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x26256222 */ +#define CONFIG_SYS_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | ( 5 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 1 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x029028c7 */ +#define CONFIG_SYS_DDR_INTERVAL ( ( 0x320 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03202000 */ +#define CONFIG_SYS_SDRAM_CFG ( SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_32_BE ) + /* 0x43080000 */ +#define CONFIG_SYS_SDRAM_CFG2 0x00401000 +#define CONFIG_SYS_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44400232 */ +#define CONFIG_SYS_DDR_MODE_2 0x8000C000 + +#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR ) + /* 0x73000002 */ + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE | \ + (2 << BR_PS_SHIFT) | /* 16 bit */ \ + BR_V) /* valid */ +#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV4 \ + | OR_GPCM_SCY_5 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EAD) + /* 0xfe000c55 */ + +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) + +/* + * Local Bus LCRR and LBCR regs + */ +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_3 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 + +#define CONFIG_SYS_LBC_LBCR 0x00040000 + +#define CONFIG_SYS_LBC_MRTPR 0x20000000 + +/* + * NAND settings + */ +#define CONFIG_SYS_NAND_BASE 0x61000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND 1 +#define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 + +#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \ + | BR_PS_8 \ + | BR_DECC_CHK_GEN \ + | BR_MS_FCM \ + | BR_V ) /* valid */ + /* 0x61000c21 */ +#define CONFIG_SYS_NAND_OR_PRELIM (0xffff8000 \ + | OR_FCM_BCTLD \ + | OR_FCM_CHT \ + | OR_FCM_SCY_2 \ + | OR_FCM_RST \ + | OR_FCM_TRLX) + /* 0xffff90ac */ + +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM + +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ + +#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM +#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM + +/* CS2 NvRAM */ +#define CONFIG_SYS_BR2_PRELIM (0x60000000 \ + | BR_PS_8 \ + | BR_V) + /* 0x60000801 */ +#define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_3 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD) + /* 0xfffe0937 */ +/* local bus read write buffer mapping SRAM@0x64000000 */ +#define CONFIG_SYS_BR3_PRELIM (0x62000000 \ + | BR_PS_16 \ + | BR_V) + /* 0x62001001 */ + +#define CONFIG_SYS_OR3_PRELIM (0xfe000000 \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD) + /* 0xfe0009f7 */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#if defined(CONFIG_PCI) +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE +#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#endif + +/* + * TSEC + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#define CONFIG_NET_MULTI + +#define CONFIG_TSEC1 +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC1" +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x01 +#define TSEC1_FLAGS 0 +#define TSEC1_PHYIDX 0 +#endif + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ +#define CONFIG_ENV_SIZE 0x4000 +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI + +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */ +#define CONFIG_SYS_HZ 1000 /* 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* 0x64050000 */ +#define CONFIG_SYS_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_CSB_TO_CLKIN_4X1 | \ + HRCWL_CORE_TO_CSB_2_5X1) + +/* 0xa0600004 */ +#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \ + HRCWH_PCI_ARBITER_ENABLE | \ + HRCWH_CORE_ENABLE | \ + HRCWH_FROM_0X00000100 | \ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT | \ + HRCWH_TSEC1M_IN_MII | \ + HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_EARLY) + +/* System IO Config */ +#define CONFIG_SYS_SICRH (0x01000000 | \ + SICRH_ETSEC2_B | \ + SICRH_ETSEC2_C | \ + SICRH_ETSEC2_D | \ + SICRH_ETSEC2_E | \ + SICRH_ETSEC2_F | \ + SICRH_ETSEC2_G | \ + SICRH_TSOBI1 | \ + SICRH_TSOBI2) + /* 0x010fff03 */ +#define CONFIG_SYS_SICRL (SICRL_LBC | \ + SICRL_SPI_A | \ + SICRL_SPI_B | \ + SICRL_SPI_C | \ + SICRL_SPI_D | \ + SICRL_ETSEC2_A) + /* 0x33fc0003) */ + +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE) + +#define CONFIG_SYS_HID2 HID2_HBE + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* DDR @ 0x00000000 */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) + +#if defined(CONFIG_PCI) +/* PCI @ 0x80000000 */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#else +#define CONFIG_SYS_IBAT1L (0) +#define CONFIG_SYS_IBAT1U (0) +#define CONFIG_SYS_IBAT2L (0) +#define CONFIG_SYS_IBAT2U (0) +#endif + +/* PCI2 not supported on 8313 */ +#define CONFIG_SYS_IBAT3L (0) +#define CONFIG_SYS_IBAT3U (0) +#define CONFIG_SYS_IBAT4L (0) +#define CONFIG_SYS_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | \ + BATU_VP) + +/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +/* FPGA, SRAM, NAND @ 0x60000000 */ +#define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U +#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U +#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U +#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_NETDEV eth0 + +#define CONFIG_HOSTNAME ve8313 +#define CONFIG_UBOOTPATH ve8313/u-boot.bin + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "ethprime=" MK_STR(CONFIG_TSEC1_NAME) "\0" \ + "u-boot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "u-boot_addr_r=100000\0" \ + "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ + "update=protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ + "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ + "cp.b ${u-boot_addr_r} " MK_STR(CONFIG_SYS_FLASH_BASE) \ + " ${filesize};" \ + "protect on " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \ + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h new file mode 100644 index 0000000..6d02995 --- /dev/null +++ b/include/configs/vpac270.h @@ -0,0 +1,323 @@ +/* + * Voipac PXA270 configuration file + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Board Configuration Options + */ +#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_VPAC270 1 /* Voipac PXA270 board */ + +#undef BOARD_LATE_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/* + * Environment settings + */ +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_ENV_OVERWRITE /* override default environment */ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \ + "bootm 0xa4000000; " \ + "fi; " \ + "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ + "bootm 0xa4000000; " \ + "fi; " \ + "bootm 0x40000;" +#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" +#define CONFIG_TIMESTAMP +#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS + +#define CONFIG_LZMA /* LZMA compression support */ + +/* + * Serial Console Configuration + */ +#define CONFIG_PXA_SERIAL +#define CONFIG_FFUART 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Bootloader Components Configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_USB +#undef CONFIG_LCD +#define CONFIG_CMD_IDE + +#ifdef CONFIG_ONENAND_U_BOOT +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_ONENAND +#else +#define CONFIG_CMD_FLASH +#undef CONFIG_CMD_ONENAND +#endif + +/* + * Networking Configuration + * chip on the Voipac PXA270 board + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#define CONFIG_NET_MULTI 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */ +#define DM9000_IO (CONFIG_DM9000_BASE) +#define DM9000_DATA (CONFIG_DM9000_BASE + 4) +#define CONFIG_NET_RETRY_COUNT 10 + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#endif + +/* + * MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_PXA_MMC +#define CONFIG_SYS_MMC_BASE 0xF0000000 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * KGDB + */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * HUSH Shell Configuration + */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 + +/* + * Clock Configuration + */ +#undef CONFIG_SYS_CLKS_IN_HZ +#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ +#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * DRAM Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ + +#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ +#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */ + +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR (0x5c000000) + +/* + * NOR FLASH + */ +#if defined(CONFIG_CMD_FLASH) /* NOR */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } + +#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 + +#define CONFIG_ENV_IS_IN_FLASH 1 + +#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ONENAND_BASE 0x00000000 +#define CONFIG_ENV_IS_IN_ONENAND 1 + +#else /* No flash */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ENV_IS_NOWHERE +#endif + +#define CONFIG_SYS_MONITOR_BASE 0x000000 +#define CONFIG_SYS_MONITOR_LEN 0x40000 + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* + * IDE + */ +#ifdef CONFIG_CMD_IDE +#define CONFIG_LBA48 +#undef CONFIG_IDE_LED +#undef CONFIG_IDE_RESET + +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 + +#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 + +#define CONFIG_SYS_ATA_DATA_OFFSET 0x120 +#define CONFIG_SYS_ATA_REG_OFFSET 0x120 +#define CONFIG_SYS_ATA_ALT_OFFSET 0x120 + +#define CONFIG_SYS_ATA_STRIDE 2 +#endif + +/* + * GPIO settings + */ +#define CONFIG_SYS_GPSR0_VAL 0x01308800 +#define CONFIG_SYS_GPSR1_VAL 0x00cf0000 +#define CONFIG_SYS_GPSR2_VAL 0x922ac000 +#define CONFIG_SYS_GPSR3_VAL 0x0161e800 + +#define CONFIG_SYS_GPCR0_VAL 0x00010000 +#define CONFIG_SYS_GPCR1_VAL 0x0 +#define CONFIG_SYS_GPCR2_VAL 0x0 +#define CONFIG_SYS_GPCR3_VAL 0x0 + +#define CONFIG_SYS_GPDR0_VAL 0xcbb18800 +#define CONFIG_SYS_GPDR1_VAL 0xfccfa981 +#define CONFIG_SYS_GPDR2_VAL 0x922affff +#define CONFIG_SYS_GPDR3_VAL 0x0161e904 + +#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 +#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510 +#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a +#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa +#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa +#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401 +#define CONFIG_SYS_GAFR3_L_VAL 0x54010310 +#define CONFIG_SYS_GAFR3_U_VAL 0x00025401 + +#define CONFIG_SYS_PSSR_VAL 0x30 + +/* + * Clock settings + */ +#define CONFIG_SYS_CKEN 0x00500240 +#define CONFIG_SYS_CCCR 0x02000290 + +/* + * Memory settings + */ +#define CONFIG_SYS_MSC0_VAL 0x3ffc95fa +#define CONFIG_SYS_MSC1_VAL 0x02ccf974 +#define CONFIG_SYS_MSC2_VAL 0x00000000 +#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3 +#define CONFIG_SYS_MDREFR_VAL 0x201fe01e +#define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x40044004 +#define CONFIG_SYS_MEM_BUF_IMP 0x0f + +/* + * PCMCIA and CF Interfaces + */ +#define CONFIG_SYS_MECR_VAL 0x00000001 +#define CONFIG_SYS_MCMEM0_VAL 0x00014307 +#define CONFIG_SYS_MCMEM1_VAL 0x00014307 +#define CONFIG_SYS_MCATT0_VAL 0x0001c787 +#define CONFIG_SYS_MCATT1_VAL 0x0001c787 +#define CONFIG_SYS_MCIO0_VAL 0x0001430f +#define CONFIG_SYS_MCIO1_VAL 0x0001430f + +/* + * LCD + */ +#ifdef CONFIG_LCD +#define CONFIG_VOIPAC_LCD +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270" +#define CONFIG_USB_STORAGE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h new file mode 100644 index 0000000..a5a873b --- /dev/null +++ b/include/configs/zipitz2.h @@ -0,0 +1,259 @@ +/* + * Aeronix Zipit Z2 configuration file + * + * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Board Configuration Options + */ +#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ + +#undef BOARD_LATE_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/* + * Environment settings + */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0x40000 +#define CONFIG_ENV_SIZE 0x20000 + +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_STACKSIZE) +#define CONFIG_SYS_GBL_DATA_SIZE 512 + +#define CONFIG_BOOTCOMMAND \ + "if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \ + "source 0xa0000000; " \ + "else " \ + "bootm 0x60000; " \ + "fi; " +#define CONFIG_BOOTARGS \ + "console=tty0 console=ttyS2,115200 fbcon=rotate:3" +#define CONFIG_TIMESTAMP +#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS + +#define CONFIG_LZMA /* LZMA compression support */ + +/* + * Serial Console Configuration + * STUART - the lower serial port on Colibri board + */ +#define CONFIG_PXA_SERIAL +#define CONFIG_STUART 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Bootloader Components Configuration + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_SPI + +/* + * MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_PXA_MMC +#define CONFIG_SYS_MMC_BASE 0xF0000000 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#endif + +/* + * SPI and LCD + */ +#ifdef CONFIG_CMD_SPI +#define CONFIG_SOFT_SPI +#define CONFIG_LCD +#define CONFIG_LMS283GF05 +#define CONFIG_VIDEO_LOGO +#define CONFIG_CMD_BMP +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) +#undef SPI_INIT + +#define SPI_DELAY udelay(10) +#define SPI_SDA(val) zipitz2_spi_sda(val) +#define SPI_SCL(val) zipitz2_spi_scl(val) +#define SPI_READ zipitz2_spi_read() +#ifndef __ASSEMBLY__ +void zipitz2_spi_sda(int); +void zipitz2_spi_scl(int); +unsigned char zipitz2_spi_read(void); +#endif +#endif + +/* + * KGDB + */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * HUSH Shell Configuration + */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 + +/* + * Clock Configuration + */ +#undef CONFIG_SYS_CLKS_IN_HZ +#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ +#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * DRAM Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ +#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ + +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE + +/* + * NOR FLASH + */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ +#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 + +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_PROTECTION + +/* + * GPIO settings + */ +#define CONFIG_SYS_GAFR0_L_VAL 0x02000140 +#define CONFIG_SYS_GAFR0_U_VAL 0x59188000 +#define CONFIG_SYS_GAFR1_L_VAL 0x63900002 +#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 +#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa +#define CONFIG_SYS_GAFR2_U_VAL 0x29000308 +#define CONFIG_SYS_GAFR3_L_VAL 0x54000000 +#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 +#define CONFIG_SYS_GPCR0_VAL 0x00000000 +#define CONFIG_SYS_GPCR1_VAL 0x00000020 +#define CONFIG_SYS_GPCR2_VAL 0x00000000 +#define CONFIG_SYS_GPCR3_VAL 0x00000000 +#define CONFIG_SYS_GPDR0_VAL 0xdafcee00 +#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab +#define CONFIG_SYS_GPDR2_VAL 0x8fe1ffff +#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a +#define CONFIG_SYS_GPSR0_VAL 0x06080400 +#define CONFIG_SYS_GPSR1_VAL 0x007f0000 +#define CONFIG_SYS_GPSR2_VAL 0x032a0000 +#define CONFIG_SYS_GPSR3_VAL 0x00000180 + +#define CONFIG_SYS_PSSR_VAL 0x30 + +/* + * Clock settings + */ +#define CONFIG_SYS_CKEN 0x00511220 +#define CONFIG_SYS_CCCR 0x00000190 + +/* + * Memory settings + */ +#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 +#define CONFIG_SYS_MSC1_VAL 0x0000ccd1 +#define CONFIG_SYS_MSC2_VAL 0x0000b884 +#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 +#define CONFIG_SYS_MDREFR_VAL 0x2011a01e +#define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 +#define CONFIG_SYS_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CONFIG_SYS_MECR_VAL 0x00000001 +#define CONFIG_SYS_MCMEM0_VAL 0x00014307 +#define CONFIG_SYS_MCMEM1_VAL 0x00014307 +#define CONFIG_SYS_MCATT0_VAL 0x0001c787 +#define CONFIG_SYS_MCATT1_VAL 0x0001c787 +#define CONFIG_SYS_MCIO0_VAL 0x0001430f +#define CONFIG_SYS_MCIO1_VAL 0x0001430f + +#endif /* __CONFIG_H */ diff --git a/include/environment.h b/include/environment.h index 203f731..fbccf6a 100644 --- a/include/environment.h +++ b/include/environment.h @@ -74,15 +74,24 @@ #endif /* CONFIG_ENV_IS_IN_FLASH */ #if defined(CONFIG_ENV_IS_IN_NAND) -# ifndef CONFIG_ENV_OFFSET -# error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND" -# endif +# if defined(CONFIG_ENV_OFFSET_OOB) +# ifdef CONFIG_ENV_OFFSET_REDUND +# error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB" +# error "is set" +# endif +extern unsigned long nand_env_oob_offset; +# define CONFIG_ENV_OFFSET nand_env_oob_offset +# else +# ifndef CONFIG_ENV_OFFSET +# error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND" +# endif +# ifdef CONFIG_ENV_OFFSET_REDUND +# define CONFIG_SYS_REDUNDAND_ENVIRONMENT +# endif +# endif /* CONFIG_ENV_OFFSET_OOB */ # ifndef CONFIG_ENV_SIZE # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND" # endif -# ifdef CONFIG_ENV_OFFSET_REDUND -# define CONFIG_SYS_REDUNDAND_ENVIRONMENT -# endif #endif /* CONFIG_ENV_IS_IN_NAND */ #if defined(CONFIG_ENV_IS_IN_MG_DISK) diff --git a/include/fat.h b/include/fat.h index c8b9493..de48afd 100644 --- a/include/fat.h +++ b/include/fat.h @@ -33,7 +33,7 @@ #define SECTOR_SIZE FS_BLOCK_SIZE -#define FS_BLOCK_SIZE 512 +#define FS_BLOCK_SIZE 512 #if FS_BLOCK_SIZE != SECTOR_SIZE #error FS_BLOCK_SIZE != SECTOR_SIZE - This code needs to be fixed! @@ -57,37 +57,31 @@ #define SIGNLEN 8 /* File attributes */ -#define ATTR_RO 1 -#define ATTR_HIDDEN 2 -#define ATTR_SYS 4 -#define ATTR_VOLUME 8 -#define ATTR_DIR 16 -#define ATTR_ARCH 32 +#define ATTR_RO 1 +#define ATTR_HIDDEN 2 +#define ATTR_SYS 4 +#define ATTR_VOLUME 8 +#define ATTR_DIR 16 +#define ATTR_ARCH 32 -#define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) +#define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) #define DELETED_FLAG ((char)0xe5) /* Marks deleted files when in name[0] */ #define aRING 0x05 /* Used as special character in name[0] */ -/* Indicates that the entry is the last long entry in a set of long +/* + * Indicates that the entry is the last long entry in a set of long * dir entries */ #define LAST_LONG_ENTRY_MASK 0x40 /* Flags telling whether we should read a file or list a directory */ -#define LS_NO 0 -#define LS_YES 1 -#define LS_DIR 1 -#define LS_ROOT 2 +#define LS_NO 0 +#define LS_YES 1 +#define LS_DIR 1 +#define LS_ROOT 2 -#ifdef DEBUG -#define FAT_DPRINT(args...) printf(args) -#else -#define FAT_DPRINT(args...) -#endif -#define FAT_ERROR(arg) printf(arg) - -#define ISDIRDELIM(c) ((c) == '/' || (c) == '\\') +#define ISDIRDELIM(c) ((c) == '/' || (c) == '\\') #define FSTYPE_NONE (-1) @@ -166,17 +160,18 @@ typedef struct dir_entry { } dir_entry; typedef struct dir_slot { - __u8 id; /* Sequence number for slot */ - __u8 name0_4[10]; /* First 5 characters in name */ - __u8 attr; /* Attribute byte */ - __u8 reserved; /* Unused */ - __u8 alias_checksum;/* Checksum for 8.3 alias */ - __u8 name5_10[12]; /* 6 more characters in name */ - __u16 start; /* Unused */ - __u8 name11_12[4]; /* Last 2 characters in name */ + __u8 id; /* Sequence number for slot */ + __u8 name0_4[10]; /* First 5 characters in name */ + __u8 attr; /* Attribute byte */ + __u8 reserved; /* Unused */ + __u8 alias_checksum;/* Checksum for 8.3 alias */ + __u8 name5_10[12]; /* 6 more characters in name */ + __u16 start; /* Unused */ + __u8 name11_12[4]; /* Last 2 characters in name */ } dir_slot; -/* Private filesystem parameters +/* + * Private filesystem parameters * * Note: FAT buffer has to be 32 bit aligned * (see FAT32 accesses) @@ -198,10 +193,10 @@ typedef long (file_read_func)(const char *filename, void *buffer, unsigned long maxsize); struct filesystem { - file_detectfs_func *detect; - file_ls_func *ls; - file_read_func *read; - const char name[12]; + file_detectfs_func *detect; + file_ls_func *ls; + file_read_func *read; + const char name[12]; }; /* FAT tables */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 9a453af..54af9fe 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -59,7 +59,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd); static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} #endif /* CONFIG_HAS_FSL_DR_USB */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx) +#if defined(CONFIG_SYS_FSL_SEC_COMPAT) void fdt_fixup_crypto_node(void *blob, int sec_rev); #else static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} @@ -83,6 +83,9 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size); void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); void fdt_del_node_and_alias(void *blob, const char *alias); +u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr); +int fdt_node_offset_by_compat_reg(void *blob, const char *compat, + phys_addr_t compat_off); #endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */ diff --git a/include/lcd.h b/include/lcd.h index 1f85daa..cd9d49d 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -87,7 +87,7 @@ typedef struct vidinfo { u_char vl_wbf; /* Wait between frames */ } vidinfo_t; -#elif defined CONFIG_PXA250 +#elif defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS /* * PXA LCD DMA descriptor */ diff --git a/include/mmc.h b/include/mmc.h index 8973bc7..fcb237e 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -271,6 +271,7 @@ int mmc_initialize(bd_t *bis); int mmc_init(struct mmc *mmc); int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); struct mmc *find_mmc_device(int dev_num); +int mmc_set_dev(int dev_num); void print_mmc_devices(char separator); int board_mmc_getcd(u8 *cd, struct mmc *mmc); diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 5214911..ba6cdf1 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -65,6 +65,7 @@ #define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) #define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20) +#define SPR_8308 0x8100 #define SPR_831X_FAMILY 0x80B #define SPR_8311 0x80B2 #define SPR_8313 0x80B0 @@ -115,8 +116,9 @@ #define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ #define SPCR_TSEC2EP_SHIFT (31-31) -#elif defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) -/* SPCR bits - MPC831x and MPC837x specific */ +#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) +/* SPCR bits - MPC8308, MPC831x and MPC837x specific */ #define SPCR_TSECDP 0x00003000 /* TSEC data priority */ #define SPCR_TSECDP_SHIFT (31-19) #define SPCR_TSECBDP 0x00000C00 /* TSEC buffer descriptor priority */ @@ -473,7 +475,7 @@ #define HRCWL_CE_TO_PLL_1X30 0x0000001E #define HRCWL_CE_TO_PLL_1X31 0x0000001F -#elif defined(CONFIG_MPC8315) +#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) #define HRCWL_SVCOD 0x30000000 #define HRCWL_SVCOD_SHIFT 28 #define HRCWL_SVCOD_DIV_2 0x00000000 @@ -541,7 +543,8 @@ #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 -#if defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) #define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 #define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 #define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 @@ -592,7 +595,8 @@ /* RSR - Reset Status Register */ -#if defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) #define RSR_RSTSRC 0xF0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 28 #else @@ -734,8 +738,8 @@ #define SCCR_USBDRCM_2 0x00200000 #define SCCR_USBDRCM_3 0x00300000 -#elif defined(CONFIG_MPC8315) -/* SCCR bits - MPC8315 specific */ +#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) +/* SCCR bits - MPC8315/MPC8308 specific */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 #define SCCR_TSEC1CM_0 0x00000000 @@ -750,6 +754,13 @@ #define SCCR_TSEC2CM_2 0x20000000 #define SCCR_TSEC2CM_3 0x30000000 +#define SCCR_SDHCCM 0x0c000000 +#define SCCR_SDHCCM_SHIFT 26 +#define SCCR_SDHCCM_0 0x00000000 +#define SCCR_SDHCCM_1 0x04000000 +#define SCCR_SDHCCM_2 0x08000000 +#define SCCR_SDHCCM_3 0x0c000000 + #define SCCR_USBDRCM 0x00c00000 #define SCCR_USBDRCM_SHIFT 22 #define SCCR_USBDRCM_0 0x00000000 diff --git a/include/mpc85xx.h b/include/mpc85xx.h index a4d4d65..2495b99 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -6,8 +6,6 @@ #ifndef __MPC85xx_H__ #define __MPC85xx_H__ -#include <asm/fsl_lbc.h> - /* define for common ppc_asm.tmpl */ #define EXC_OFF_SYS_RESET 0x100 /* System reset */ #define _START_OFFSET 0 diff --git a/include/nand.h b/include/nand.h index 2a81597..8bdf419 100644 --- a/include/nand.h +++ b/include/nand.h @@ -130,3 +130,12 @@ void board_nand_select_device(struct nand_chip *nand, int chip); __attribute__((noreturn)) void nand_boot(void); #endif + +#ifdef CONFIG_ENV_OFFSET_OOB +#define ENV_OOB_MARKER 0x30425645 /*"EVB0" in little-endian -- offset is stored + as block number*/ +#define ENV_OOB_MARKER_OLD 0x30564e45 /*"ENV0" in little-endian -- offset is + stored as byte number */ +#define ENV_OFFSET_SIZE 8 +int get_nand_env_oob(nand_info_t *nand, unsigned long *result); +#endif diff --git a/include/netdev.h b/include/netdev.h index 882642a..94eedfe 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -43,12 +43,14 @@ int cpu_eth_init(bd_t *bis); /* Driver initialization prototypes */ int altera_tse_initialize(u8 dev_num, int mac_base, int sgdma_rx_base, int sgdma_tx_base); +int ax88180_initialize(bd_t *bis); int au1x00_enet_initialize(bd_t*); int at91emac_register(bd_t *bis, unsigned long iobase); int bfin_EMAC_initialize(bd_t *bis); int cs8900_initialize(u8 dev_num, int base_addr); int dc21x4x_initialize(bd_t *bis); int davinci_emac_initialize(void); +int designware_initialize(u32 id, ulong base_addr, u32 phy_addr); int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); int e1000_initialize(bd_t *bis); int eepro100_initialize(bd_t *bis); @@ -61,7 +63,6 @@ int ftmac100_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); int inca_switch_initialize(bd_t *bis); -int kirkwood_egiga_initialize(bd_t *bis); int lan91c96_initialize(u8 dev_num, int base_addr); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); @@ -70,6 +71,7 @@ int mpc512x_fec_initialize(bd_t *bis); int mpc5xxx_fec_initialize(bd_t *bis); int mpc8220_fec_initialize(bd_t *bis); int mpc82xx_scc_enet_initialize(bd_t *bis); +int mvgbe_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); int npe_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); diff --git a/include/status_led.h b/include/status_led.h index 9dbf01f..f213595 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -346,9 +346,6 @@ void status_led_set (int led, int state); #elif defined(CONFIG_NIOS2) /* XXX empty just to avoid the error */ /************************************************************************/ -#elif defined(CONFIG_BLACKFIN) -/* XXX empty just to avoid the error */ -/************************************************************************/ #elif defined(CONFIG_V38B) # define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ diff --git a/include/video_fb.h b/include/video_fb.h index 9825f0c..f649c54 100644 --- a/include/video_fb.h +++ b/include/video_fb.h @@ -1,4 +1,4 @@ - /* +/* * (C) Copyright 1997-2002 ELTEC Elektronik AG * Frank Gottschling <fgottschling@eltec.de> * diff --git a/nand_spl/board/freescale/mpc8536ds/nand_boot.c b/nand_spl/board/freescale/mpc8536ds/nand_boot.c index af29dc2..5a0a0c7 100644 --- a/nand_spl/board/freescale/mpc8536ds/nand_boot.c +++ b/nand_spl/board/freescale/mpc8536ds/nand_boot.c @@ -34,12 +34,11 @@ void board_init_f(ulong bootflag) int px_spd; u32 plat_ratio, bus_clk, sys_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) /* for FPGA */ - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); #else #error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined #endif diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index ff47d55..9547d44 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -32,7 +32,7 @@ static void nand_wait(void) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; for (;;) { uint32_t status = in_be32(®s->ltesr); @@ -49,7 +49,7 @@ static void nand_wait(void) static void nand_load(unsigned int offs, int uboot_size, uchar *dst) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; int large = in_be32(®s->bank[0].or) & OR_FCM_PGS; int block_shift = large ? 17 : 14; @@ -234,6 +234,9 @@ int eth_initialize(bd_t *bis) puts (" [PRIME]"); } + if (strchr(dev->name, ' ')) + puts("\nWarning: eth device name has a space!\n"); + eth_getenv_enetaddr_by_index(eth_number, env_enetaddr); if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) { diff --git a/onenand_ipl/board/vpac270/Makefile b/onenand_ipl/board/vpac270/Makefile new file mode 100644 index 0000000..22d0410 --- /dev/null +++ b/onenand_ipl/board/vpac270/Makefile @@ -0,0 +1,83 @@ +IPL =onenand_ipl +include $(TOPDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds +LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL +CFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL +OBJCFLAGS += --gap-fill=0x00 + +SOBJS := lowlevel_init.o +SOBJS += start.o +COBJS := vpac270.o +COBJS += onenand_read.o +COBJS += onenand_boot.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR) + +onenandobj := $(OBJTREE)/onenand_ipl/ + +ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-2k.bin + +all: $(obj).depend $(ALL) + +$(onenandobj)onenand-ipl-2k.bin: $(onenandobj)onenand-ipl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x5c040400 -O binary $< $@ + +$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(onenandobj)onenand-ipl: $(OBJS) $(onenandobj)u-boot.lds + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + -Map $@.map -o $@ + +$(onenandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + +# create symbolic links from common files + +# from cpu directory +$(obj)start.S: + @rm -f $@ + ln -s $(SRCTREE)/$(CPUDIR)/start.S $@ + +# from onenand_ipl directory +$(obj)onenand_ipl.h: + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@ + +$(obj)onenand_boot.c: $(obj)onenand_ipl.h + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@ + +$(obj)onenand_read.c: $(obj)onenand_ipl.h + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@ + +ifneq ($(OBJTREE), $(SRCTREE)) +$(obj)vpac270.c: + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/vpac270.c $@ + +$(obj)lowlevel_init.S: + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/lowlevel_init.S $@ +endif + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)$.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/onenand_ipl/board/vpac270/config.mk b/onenand_ipl/board/vpac270/config.mk new file mode 100644 index 0000000..f071dea --- /dev/null +++ b/onenand_ipl/board/vpac270/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x5c03fc00 diff --git a/board/altera/ep1c20/ep1c20.c b/onenand_ipl/board/vpac270/lowlevel_init.S index 82900f7..e79d8dd 100644 --- a/board/altera/ep1c20/ep1c20.c +++ b/onenand_ipl/board/vpac270/lowlevel_init.S @@ -1,6 +1,8 @@ /* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> + * Voipac PXA270 Lowlevel Hardware Initialization + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * * * See file CREDITS for list of people who contributed to this * project. @@ -21,32 +23,12 @@ * MA 02111-1307 USA */ -#include <common.h> -#include <netdev.h> - -int board_early_init_f (void) -{ - return 0; -} - -int checkboard (void) -{ - puts ("BOARD : Altera EP-1C20\n"); - return 0; -} - -phys_size_t initdram (int board_type) -{ - return (0); -} +#include <config.h> +#include <version.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/macro.h> -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif +.globl lowlevel_init +lowlevel_init: + pxa_clock_setup + mov pc, lr diff --git a/onenand_ipl/board/vpac270/u-boot.onenand.lds b/onenand_ipl/board/vpac270/u-boot.onenand.lds new file mode 100644 index 0000000..b2e7557 --- /dev/null +++ b/onenand_ipl/board/vpac270/u-boot.onenand.lds @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) . = ALIGN(4); } + _end = .; +} diff --git a/board/altera/ep1s40/ep1s40.c b/onenand_ipl/board/vpac270/vpac270.c index 6395de7..a1eb331 100644 --- a/board/altera/ep1s40/ep1s40.c +++ b/onenand_ipl/board/vpac270/vpac270.c @@ -1,6 +1,13 @@ /* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> * * See file CREDITS for list of people who contributed to this * project. @@ -22,26 +29,14 @@ */ #include <common.h> -#include <netdev.h> +#include <asm/arch/hardware.h> -int checkboard (void) +int board_init (void) { - puts ("BOARD : Altera EP-1S40\n"); return 0; } -phys_size_t initdram (int board_type) -{ - return (0); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) +int s_init(int skip) { - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; + return 0; } -#endif diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c index 5ce45ba..957a7c4 100644 --- a/tools/updater/cmd_flash.c +++ b/tools/updater/cmd_flash.c @@ -121,10 +121,8 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) int n, sect_first, sect_last; int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (strcmp(argv[1], "all") == 0) { for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { @@ -146,10 +144,8 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) return rcode; } - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "bank") == 0) { bank = simple_strtoul(argv[2], NULL, 16); @@ -167,10 +163,8 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) addr_first = simple_strtoul(argv[1], NULL, 16); addr_last = simple_strtoul(argv[2], NULL, 16); - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } + if (addr_first >= addr_last) + return cmd_usage(cmdtp); printf ("Erase Flash from 0x%08lx to 0x%08lx ", addr_first, addr_last); rcode = flash_sect_erase(addr_first, addr_last); @@ -243,19 +237,15 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) int i, p, n, sect_first, sect_last; int rcode = 0; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "off") == 0) p = 0; else if (strcmp(argv[1], "on") == 0) p = 1; - else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); if (strcmp(argv[2], "all") == 0) { for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { @@ -309,10 +299,8 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) return rcode; } - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); if (strcmp(argv[2], "bank") == 0) { bank = simple_strtoul(argv[3], NULL, 16); @@ -340,7 +328,8 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) } #if defined(CONFIG_SYS_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); + if (!rcode) + puts(" done\n"); #endif /* CONFIG_SYS_FLASH_PROTECTION */ return rcode; @@ -349,12 +338,10 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) addr_first = simple_strtoul(argv[2], NULL, 16); addr_last = simple_strtoul(argv[3], NULL, 16); - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } - rcode = flash_sect_protect (p, addr_first, addr_last); - return rcode; + if (addr_first >= addr_last) + return cmd_usage(cmdtp); + + return flash_sect_protect (p, addr_first, addr_last); } int flash_sect_protect (int p, ulong addr_first, ulong addr_last) { |