diff options
55 files changed, 2041 insertions, 412 deletions
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index f1cacdc..b6a558b 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -18,6 +18,9 @@ config TARGET_ORIGEN config TARGET_TRATS2 bool "Exynos4412 Trat2 board" +config TARGET_ODROID + bool "Exynos4412 Odroid board" + config TARGET_ARNDALE bool "Exynos5250 Arndale board" @@ -48,6 +51,7 @@ source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" source "board/samsung/origen/Kconfig" source "board/samsung/trats2/Kconfig" +source "board/samsung/odroid/Kconfig" source "board/samsung/arndale/Kconfig" source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 400d134..7558eff 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -82,7 +82,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) * VPLL_CON: MIDV [24:16] * BPLL_CON: MIDV [25:16]: Exynos5 */ - if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL || + pllreg == SPLL) mask = 0x3ff; else mask = 0x1ff; @@ -391,6 +392,9 @@ static unsigned long exynos5420_get_pll_clk(int pllreg) r = readl(&clk->rpll_con0); k = readl(&clk->rpll_con1); break; + case SPLL: + r = readl(&clk->spll_con0); + break; default: printf("Unsupported PLL (%d)\n", pllreg); return 0; @@ -1027,6 +1031,40 @@ static unsigned long exynos5_get_lcd_clk(void) return pclk; } +static unsigned long exynos5420_get_lcd_clk(void) +{ + struct exynos5420_clock *clk = + (struct exynos5420_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_DISP10 + * FIMD1_SEL [4] + * 0: SCLK_RPLL + * 1: SCLK_SPLL + */ + sel = readl(&clk->src_disp10); + sel &= (1 << 4); + + if (sel) + sclk = get_pll_clk(SPLL); + else + sclk = get_pll_clk(RPLL); + + /* + * CLK_DIV_DISP10 + * FIMD1_RATIO [3:0] + */ + ratio = readl(&clk->div_disp10); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + void exynos4_set_lcd_clk(void) { struct exynos4_clock *clk = @@ -1131,6 +1169,33 @@ void exynos5_set_lcd_clk(void) clrsetbits_le32(&clk->div_disp1_0, 0xf, 0x0); } +void exynos5420_set_lcd_clk(void) +{ + struct exynos5420_clock *clk = + (struct exynos5420_clock *)samsung_get_base_clock(); + unsigned int cfg; + + /* + * CLK_SRC_DISP10 + * FIMD1_SEL [4] + * 0: SCLK_RPLL + * 1: SCLK_SPLL + */ + cfg = readl(&clk->src_disp10); + cfg &= ~(0x1 << 4); + cfg |= (0 << 4); + writel(cfg, &clk->src_disp10); + + /* + * CLK_DIV_DISP10 + * FIMD1_RATIO [3:0] + */ + cfg = readl(&clk->div_disp10); + cfg &= ~(0xf << 0); + cfg |= (0 << 0); + writel(cfg, &clk->div_disp10); +} + void exynos4_set_mipi_clk(void) { struct exynos4_clock *clk = @@ -1602,16 +1667,24 @@ unsigned long get_lcd_clk(void) { if (cpu_is_exynos4()) return exynos4_get_lcd_clk(); - else - return exynos5_get_lcd_clk(); + else { + if (proid_is_exynos5420()) + return exynos5420_get_lcd_clk(); + else + return exynos5_get_lcd_clk(); + } } void set_lcd_clk(void) { if (cpu_is_exynos4()) exynos4_set_lcd_clk(); - else - exynos5_set_lcd_clk(); + else { + if (proid_is_exynos5250()) + exynos5_set_lcd_clk(); + else if (proid_is_exynos5420()) + exynos5420_set_lcd_clk(); + } } void set_mipi_clk(void) diff --git a/arch/arm/cpu/armv7/exynos/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h index a875d0b..fce502f 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init.h +++ b/arch/arm/cpu/armv7/exynos/clock_init.h @@ -75,6 +75,9 @@ struct mem_timings { unsigned spll_mdiv; unsigned spll_pdiv; unsigned spll_sdiv; + unsigned rpll_mdiv; + unsigned rpll_pdiv; + unsigned rpll_sdiv; unsigned pclk_cdrex_ratio; unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c index 1d6977f..b6a9bc1 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -179,6 +179,10 @@ struct mem_timings mem_timings[] = { .spll_mdiv = 0xc8, .spll_pdiv = 0x3, .spll_sdiv = 0x2, + /* RPLL @70.5Mhz */ + .rpll_mdiv = 0x5E, + .rpll_pdiv = 0x2, + .rpll_sdiv = 0x4, .direct_cmd_msr = { 0x00020018, 0x00030000, 0x00010046, 0x00000d70, @@ -800,6 +804,7 @@ static void exynos5420_system_clock_init(void) writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock); writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock); writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock); + writel(mem->rpll_pdiv * PLL_X_LOCK_FACTOR, &clk->rpll_lock); setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK); @@ -898,6 +903,14 @@ static void exynos5420_system_clock_init(void) while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0) ; + /* Set RPLL */ + writel(RPLL_CON2_VAL, &clk->rpll_con2); + writel(RPLL_CON1_VAL, &clk->rpll_con1); + val = set_pll(mem->rpll_mdiv, mem->rpll_pdiv, mem->rpll_sdiv); + writel(val, &clk->rpll_con0); + while ((readl(&clk->rpll_con0) & PLL_LOCKED) == 0) + ; + writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0); writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1); diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h index 3242093..2eea48a 100644 --- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h @@ -783,7 +783,7 @@ #define CLK_SRC_TOP2_VAL 0x11101000 #define CLK_SRC_TOP3_VAL 0x11111111 #define CLK_SRC_TOP4_VAL 0x11110111 -#define CLK_SRC_TOP5_VAL 0x11111100 +#define CLK_SRC_TOP5_VAL 0x11111101 #define CLK_SRC_TOP6_VAL 0x11110111 #define CLK_SRC_TOP7_VAL 0x00022200 diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 86a0c75..b929486 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -704,8 +704,8 @@ static int exynos4x12_mmc_config(int peripheral, int flags) ext_func = S5P_GPIO_FUNC(0x3); break; case PERIPH_ID_SDMMC4: - start = EXYNOS4_GPIO_K00; - start_ext = EXYNOS4_GPIO_K13; + start = EXYNOS4X12_GPIO_K00; + start_ext = EXYNOS4X12_GPIO_K13; func = S5P_GPIO_FUNC(0x3); ext_func = S5P_GPIO_FUNC(0x4); break; diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 638ee0b..e1ab3d6 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -202,3 +202,10 @@ void power_exit_wakeup(void) else exynos4_power_exit_wakeup(); } + +unsigned int get_boot_mode(void) +{ + unsigned int om_pin = samsung_get_base_power(); + + return readl(om_pin) & OM_PIN_MASK; +} diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c index 7916630..658e4cb 100644 --- a/arch/arm/cpu/armv7/exynos/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -20,7 +20,6 @@ #include "clock_init.h" DECLARE_GLOBAL_DATA_PTR; -#define OM_STAT (0x1f << 1) /* Index into irom ptr table */ enum index { @@ -184,7 +183,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr) */ void copy_uboot_to_ram(void) { - enum boot_mode bootmode = BOOT_MODE_OM; + unsigned int bootmode = BOOT_MODE_OM; u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL; u32 offset = 0, size = 0; @@ -207,7 +206,7 @@ void copy_uboot_to_ram(void) #endif if (bootmode == BOOT_MODE_OM) - bootmode = readl(samsung_get_base_power()) & OM_STAT; + bootmode = get_boot_mode(); switch (bootmode) { #ifdef CONFIG_SPI_BOOTING @@ -216,7 +215,7 @@ void copy_uboot_to_ram(void) exynos_spi_copy(param->uboot_size, CONFIG_SYS_TEXT_BASE); break; #endif - case BOOT_MODE_MMC: + case BOOT_MODE_SD: offset = BL2_START_OFFSET; size = BL2_SIZE_BLOC_COUNT; copy_bl2 = get_irom_func(MMC_INDEX); diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index 30d76a6..47fc893 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -174,7 +174,7 @@ void init_pll(const struct pll_init_data *data) * bypass disabled */ bwadj = pllm >> 1; - tmp |= ((bwadj & PLL_BWADJ_LO_SHIFT) << PLL_BWADJ_LO_SHIFT) | + tmp |= ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) | (pllm << PLL_MULT_SHIFT) | (plld & PLL_DIV_MASK) | (pllod << PLL_CLKOD_SHIFT); diff --git a/arch/arm/cpu/armv7/keystone/psc.c b/arch/arm/cpu/armv7/keystone/psc.c index fa5422f..237e776 100644 --- a/arch/arm/cpu/armv7/keystone/psc.c +++ b/arch/arm/cpu/armv7/keystone/psc.c @@ -13,9 +13,6 @@ #include <asm/processor.h> #include <asm/arch/psc_defs.h> -#define DEVICE_REG32_R(addr) __raw_readl((u32 *)(addr)) -#define DEVICE_REG32_W(addr, val) __raw_writel(val, (u32 *)(addr)) - int psc_delay(void) { udelay(10); @@ -51,7 +48,7 @@ int psc_wait(u32 domain_num) retry = 0; do { - ptstat = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PSTAT); + ptstat = __raw_readl(KS2_PSC_BASE + PSC_REG_PSTAT); ptstat = ptstat & (1 << domain_num); } while ((ptstat != 0) && ((retry += psc_delay()) < PSC_PTSTAT_TIMEOUT_LIMIT)); @@ -67,8 +64,7 @@ u32 psc_get_domain_num(u32 mod_num) u32 domain_num; /* Get the power domain associated with the module number */ - domain_num = DEVICE_REG32_R(KS2_PSC_BASE + - PSC_REG_MDCFG(mod_num)); + domain_num = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); domain_num = PSC_REG_MDCFG_GET_PD(domain_num); return domain_num; @@ -102,7 +98,7 @@ int psc_set_state(u32 mod_num, u32 state) * Get the power domain associated with the module number, and reset * isolation functionality */ - v = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); + v = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); domain_num = PSC_REG_MDCFG_GET_PD(v); reset_iso = PSC_REG_MDCFG_GET_RESET_ISO(v); @@ -119,24 +115,22 @@ int psc_set_state(u32 mod_num, u32 state) * change is made if the new state is power down. */ if (state == PSC_REG_VAL_MDCTL_NEXT_ON) { - pdctl = DEVICE_REG32_R(KS2_PSC_BASE + - PSC_REG_PDCTL(domain_num)); + pdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_ON); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num), - pdctl); + __raw_writel(pdctl, KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); } /* Set the next state for the module to enabled/disabled */ - mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state); mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + __raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); /* Trigger the enable */ - ptcmd = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PTCMD); + ptcmd = __raw_readl(KS2_PSC_BASE + PSC_REG_PTCMD); ptcmd |= (u32)(1<<domain_num); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PTCMD, ptcmd); + __raw_writel(ptcmd, KS2_PSC_BASE + PSC_REG_PTCMD); /* Wait on the complete */ return psc_wait(domain_num); @@ -157,7 +151,7 @@ int psc_enable_module(u32 mod_num) u32 mdctl; /* Set the bit to apply reset */ - mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); if ((mdctl & 0x3f) == PSC_REG_VAL_MDSTAT_STATE_ON) return 0; @@ -176,11 +170,11 @@ int psc_disable_module(u32 mod_num) u32 mdctl; /* Set the bit to apply reset */ - mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); if ((mdctl & 0x3f) == 0) return 0; mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + __raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE); } @@ -199,11 +193,11 @@ int psc_set_reset_iso(u32 mod_num) u32 mdctl; /* Set the reset isolation bit */ - mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, 1); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + __raw_writel(mdctl, KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); - v = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); + v = __raw_readl(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); if (PSC_REG_MDCFG_GET_RESET_ISO(v) == 1) return 0; @@ -220,14 +214,14 @@ int psc_disable_domain(u32 domain_num) u32 pdctl; u32 ptcmd; - pdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); + pdctl = __raw_readl(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_OFF); pdctl = PSC_REG_PDCTL_SET_PDMODE(pdctl, PSC_REG_VAL_PDCTL_PDMODE_SLEEP); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl); + __raw_writel(pdctl, KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); - ptcmd = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PTCMD); + ptcmd = __raw_readl(KS2_PSC_BASE + PSC_REG_PTCMD); ptcmd |= (u32)(1 << domain_num); - DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PTCMD, ptcmd); + __raw_writel(ptcmd, KS2_PSC_BASE + PSC_REG_PTCMD); return psc_wait(domain_num); } diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index ed89f85..0257383 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -227,6 +227,16 @@ static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ }; +static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = { + {111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = { {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ @@ -286,6 +296,17 @@ struct dplls dra7xx_dplls = { .gmac = gmac_dpll_params_2000mhz, }; +struct dplls dra72x_dplls = { + .mpu = mpu_dpll_params_1ghz, + .core = core_dpll_params_2128mhz_dra7xx, + .per = per_dpll_params_768mhz_dra7xx, + .abe = abe_dpll_params_sysclk2_361267khz, + .iva = iva_dpll_params_2330mhz_dra7xx, + .usb = usb_dpll_params_1920mhz, + .ddr = ddr_dpll_params_2664mhz, + .gmac = gmac_dpll_params_2000mhz, +}; + struct pmic_data palmas = { .base_offset = PALMAS_SMPS_BASE_VOLT_UV, .step = 10000, /* 10 mV represented in uV */ @@ -560,6 +581,18 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = { .ctrl_ddr_ctrl_ext_0 = 0xA2000000, }; +const struct ctrl_ioregs ioregs_dra72x_es1 = { + .ctrl_ddrch = 0x40404040, + .ctrl_lpddr2ch = 0x40404040, + .ctrl_ddr3ch = 0x60606080, + .ctrl_ddrio_0 = 0xA2084210, + .ctrl_ddrio_1 = 0x84210840, + .ctrl_ddrio_2 = 0x84210000, + .ctrl_emif_sdram_config_ext = 0x0001C1A7, + .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, + .ctrl_ddr_ctrl_ext_0 = 0xA2000000, +}; + void hw_data_init(void) { u32 omap_rev = omap_revision(); @@ -592,7 +625,7 @@ void hw_data_init(void) case DRA722_ES1_0: *prcm = &dra7xx_prcm; - *dplls_data = &dra7xx_dplls; + *dplls_data = &dra72x_dplls; *omap_vcores = &dra722_volts; *ctrl = &dra7xx_ctrl; break; @@ -619,9 +652,11 @@ void get_ioregs(const struct ctrl_ioregs **regs) break; case DRA752_ES1_0: case DRA752_ES1_1: - case DRA722_ES1_0: *regs = &ioregs_dra7xx_es1; break; + case DRA722_ES1_0: + *regs = &ioregs_dra72x_es1; + break; default: printf("\n INVALID OMAP REVISION "); diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 9105121..065199b 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -185,6 +185,30 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .emif_rd_wr_exec_thresh = 0x00000305 }; +const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851AB2, + .sdram_config = 0x61851AB2, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0024400A, + .emif_ddr_phy_ctlr_1 = 0x0024400A, + .emif_ddr_ext_phy_ctrl_1 = 0x10040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00A400A4, + .emif_ddr_ext_phy_ctrl_3 = 0x00A900A9, + .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0, + .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, @@ -267,6 +291,8 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) } break; case DRA722_ES1_0: + *regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1; + break; default: *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; } @@ -450,6 +476,35 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { 0x0 }; +const u32 +dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = { + 0x00A400A4, + 0x00390039, + 0x00320032, + 0x00320032, + 0x00320032, + 0x00440044, + 0x00550055, + 0x00550055, + 0x00550055, + 0x00550055, + 0x007F007F, + 0x004D004D, + 0x00430043, + 0x00560056, + 0x00540054, + 0x00600060, + 0x0, + 0x00600020, + 0x40010080, + 0x08102040, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0 +}; + const struct lpddr2_mr_regs mr_regs = { .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, .mr2 = 0x6, @@ -478,7 +533,6 @@ static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, break; case DRA752_ES1_0: case DRA752_ES1_1: - case DRA722_ES1_0: if (emif_nr == 1) { *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1; *size = @@ -489,6 +543,10 @@ static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2); } break; + case DRA722_ES1_0: + *regs = dra_ddr3_ext_phy_ctrl_const_base_666MHz; + *size = ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_666MHz); + break; default: *regs = ddr3_ext_phy_ctrl_const_base_es2; *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c46b7be..1ccd827 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,7 +1,8 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ exynos4210-universal_c210.dtb \ exynos4210-trats.dtb \ - exynos4412-trats2.dtb + exynos4412-trats2.dtb \ + exynos4412-odroid.dtb dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts new file mode 100644 index 0000000..24d0bf1 --- /dev/null +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -0,0 +1,70 @@ +/* + * Odroid-U3/X2 board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "exynos4.dtsi" + +/ { + model = "Odroid based on Exynos4412"; + compatible = "samsung,odroid", "samsung,exynos4412"; + + aliases { + i2c0 = "/i2c@13860000"; + serial0 = "/serial@13800000"; + console = "/serial@13810000"; + mmc2 = "sdhci@12530000"; + mmc4 = "dwmmc@12550000"; + }; + + i2c@13860000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + max77686_pmic@09 { + compatible = "maxim,max77686_pmic"; + interrupts = <7 0>; + reg = <0x09 0 0>; + #clock-cells = <1>; + }; + }; + + serial@13810000 { + status = "okay"; + }; + + sdhci@12510000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12530000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpio 0xC2 0>; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + dwmmc@12550000 { + samsung,bus-width = <8>; + samsung,timing = <2 1 0>; + samsung,removable = <0>; + fifoth_val = <0x203f0040>; + bus_hz = <400000000>; + div = <0x3>; + index = <4>; + }; +}; diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts index 8d148af..3ed70a8 100644 --- a/arch/arm/dts/exynos5420-peach-pit.dts +++ b/arch/arm/dts/exynos5420-peach-pit.dts @@ -63,6 +63,11 @@ reg = <0x20>; compatible = "maxim,max98090-codec"; }; + + edp-lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + }; }; sound@3830000 { @@ -124,4 +129,29 @@ xhci@12400000 { samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */ }; + + fimd@14400000 { + samsung,vl-freq = <60>; + samsung,vl-col = <1366>; + samsung,vl-row = <768>; + samsung,vl-width = <1366>; + samsung,vl-height = <768>; + + samsung,vl-clkp; + samsung,vl-dp; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <32>; + samsung,vl-hbpd = <40>; + samsung,vl-hfpd = <40>; + samsung,vl-vspw = <6>; + samsung,vl-vbpd = <10>; + samsung,vl-vfpd = <12>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <3>; + samsung,interface-mode = <1>; + samsung,dp-enabled = <1>; + samsung,dual-lcd-enabled = <0>; + }; }; diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi index b9f8e0b..c21d798 100644 --- a/arch/arm/dts/exynos54xx.dtsi +++ b/arch/arm/dts/exynos54xx.dtsi @@ -113,6 +113,16 @@ status = "disabled"; }; + fimdm0_sysmmu@0x14640000 { + compatible = "samsung,sysmmu-v3.3"; + reg = <0x14640000 0x100>; + }; + + fimdm1_sysmmu@0x14680000 { + compatible = "samsung,sysmmu-v3.3"; + reg = <0x14680000 0x100>; + }; + fimd@14400000 { /* sysmmu is not used in U-Boot */ samsung,disable-sysmmu; diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index ffbc07e..db24dc0 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -15,6 +15,7 @@ #define VPLL 4 #define BPLL 5 #define RPLL 6 +#define SPLL 7 #define MASK_PRE_RATIO(x) (0xff << ((x << 4) + 8)) #define MASK_RATIO(x) (0xf << (x << 4)) diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index be5113f..8fb5c23 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -1504,6 +1504,7 @@ static const struct gpio_name_num_table exynos5420_gpio_table[] = { void gpio_cfg_pin(int gpio, int cfg); void gpio_set_pull(int gpio, int mode); void gpio_set_drv(int gpio, int mode); +int gpio_direction_input(unsigned gpio); int gpio_direction_output(unsigned gpio, int value); int gpio_set_value(unsigned gpio, int value); int gpio_get_value(unsigned gpio); diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index 4f2447b..e8a98a5 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -1670,6 +1670,27 @@ struct exynos5420_power { }; #endif /* __ASSEMBLY__ */ +#define OM_PIN_BITS 0x1f +#define OM_PIN_SHIFT 0x1 +#define OM_PIN_MASK (OM_PIN_BITS << OM_PIN_SHIFT) + +enum { + /* + * Assign the OM pin values for respective boot modes. + * Exynos4 does not support spi boot and the mmc boot OM + * pin values are the same across Exynos4 and Exynos5. + */ + BOOT_MODE_SD = 4, /* SD_CH2 | USB */ + BOOT_MODE_EMMC = 8, /* EMMC4.4 | USB */ + BOOT_MODE_EMMC_SD = 40, /* EMMC4.4 | SD_CH2 */ + BOOT_MODE_SERIAL = 20, + /* Boot based on Operating Mode pin settings */ + BOOT_MODE_OM = 32, + BOOT_MODE_USB, /* Boot using USB download */ +}; + +unsigned int get_boot_mode(void); + void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable); #define EXYNOS_MIPI_PHY_ENABLE (1 << 0) diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h index b1d68c3..cdcb2bc 100644 --- a/arch/arm/include/asm/arch-exynos/spl.h +++ b/arch/arm/include/asm/arch-exynos/spl.h @@ -8,20 +8,7 @@ #define __ASM_ARCH_EXYNOS_SPL_H__ #include <asm/arch-exynos/dmc.h> - -enum boot_mode { - /* - * Assign the OM pin values for respective boot modes. - * Exynos4 does not support spi boot and the mmc boot OM - * pin values are the same across Exynos4 and Exynos5. - */ - BOOT_MODE_MMC = 4, - BOOT_MODE_EMMC = 8, /* EMMC4.4 */ - BOOT_MODE_SERIAL = 20, - /* Boot based on Operating Mode pin settings */ - BOOT_MODE_OM = 32, - BOOT_MODE_USB, /* Boot using USB download */ -}; +#include <asm/arch/power.h> #ifndef __ASSEMBLY__ /* Parameters of early board initialization in SPL */ @@ -62,7 +49,7 @@ struct spl_machine_param { * table only for mmc boot. */ u32 uboot_size; - enum boot_mode boot_source; /* Boot device */ + unsigned boot_source; /* Boot device */ unsigned frequency_mhz; /* Frequency of memory in MHz */ unsigned arm_freq_mhz; /* ARM Frequency in MHz */ u32 serial_base; /* Serial base address */ diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h index 7e2057c..320763f 100644 --- a/arch/arm/include/asm/arch-exynos/system.h +++ b/arch/arm/include/asm/arch-exynos/system.h @@ -39,5 +39,9 @@ struct exynos5_sysreg { void set_usbhost_mode(unsigned int mode); void set_system_display_ctrl(void); +int exynos_lcd_early_init(const void *blob); + +/* Initialize the Parade dP<->LVDS bridge if present */ +int parade_init(const void *blob); #endif /* _EXYNOS4_SYSTEM_H */ diff --git a/arch/arm/include/asm/arch-keystone/emac_defs.h b/arch/arm/include/asm/arch-keystone/emac_defs.h index 0aa2f89..9cd8925 100644 --- a/arch/arm/include/asm/arch-keystone/emac_defs.h +++ b/arch/arm/include/asm/arch-keystone/emac_defs.h @@ -13,9 +13,6 @@ #include <asm/arch/hardware.h> #include <asm/io.h> -#define DEVICE_REG32_R(a) readl(a) -#define DEVICE_REG32_W(a, v) writel(v, a) - #define EMAC_EMACSL_BASE_ADDR (KS2_PASS_BASE + 0x00090900) #define EMAC_MDIO_BASE_ADDR (KS2_PASS_BASE + 0x00090300) #define EMAC_SGMII_BASE_ADDR (KS2_PASS_BASE + 0x00090100) @@ -182,8 +179,8 @@ struct mac_sl_cfg { #endif #define hw_config_streaming_switch() \ - DEVICE_REG32_W(DEVICE_PSTREAM_CFG_REG_ADDR, \ - DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI); + writel(DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI,\ + DEVICE_PSTREAM_CFG_REG_ADDR); /* EMAC MDIO Registers Structure */ struct mdio_regs { diff --git a/arch/arm/lib/reset.c b/arch/arm/lib/reset.c index 7a03580..9a95f08 100644 --- a/arch/arm/lib/reset.c +++ b/arch/arm/lib/reset.c @@ -23,6 +23,10 @@ #include <common.h> +__weak void reset_misc(void) +{ +} + int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { puts ("resetting ...\n"); @@ -30,6 +34,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) udelay (50000); /* wait 50 ms */ disable_interrupts(); + + reset_misc(); reset_cpu(0); /*NOTREACHED*/ diff --git a/board/samsung/arndale/MAINTAINERS b/board/samsung/arndale/MAINTAINERS index 0a01a07..7dc1785 100644 --- a/board/samsung/arndale/MAINTAINERS +++ b/board/samsung/arndale/MAINTAINERS @@ -1,5 +1,5 @@ ARNDALE BOARD -M: Inderpal Singh <inderpal.singh@linaro.org> +M: Chander Kashyap <k.chander@samsung.com> S: Maintained F: board/samsung/arndale/ F: include/configs/arndale.h diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c index 9dc7c83..5c3c5bb 100644 --- a/board/samsung/common/board.c +++ b/board/samsung/common/board.c @@ -20,6 +20,7 @@ #include <asm/arch/mmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/power.h> +#include <asm/arch/system.h> #include <power/pmic.h> #include <asm/arch/sromc.h> #include <lcd.h> @@ -137,7 +138,9 @@ static int board_uart_init(void) int board_early_init_f(void) { int err; - +#ifdef CONFIG_BOARD_TYPES + set_board_type(); +#endif err = board_uart_init(); if (err) { debug("UART init failed\n"); @@ -148,6 +151,20 @@ int board_early_init_f(void) board_i2c_init(gd->fdt_blob); #endif +#if defined(CONFIG_OF_CONTROL) && defined(CONFIG_EXYNOS_FB) +/* + * board_init_f(arch/arm/lib/board.c) calls lcd_setmem() which needs + * panel_info.vl_col, panel_info.vl_row and panel_info.vl_bpix, to reserve + * FB memory at a very early stage. So, we need to fill panel_info.vl_col, + * panel_info.vl_row and panel_info.vl_bpix before lcd_setmem() is called. + */ + err = exynos_lcd_early_init(gd->fdt_blob); + if (err) { + debug("LCD early init failed\n"); + return err; + } +#endif + return exynos_early_init_f(); } #endif @@ -240,22 +257,39 @@ int board_eth_init(bd_t *bis) } #ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) +static int init_mmc(void) +{ +#ifdef CONFIG_SDHCI + return exynos_mmc_init(gd->fdt_blob); +#else + return 0; +#endif +} + +static int init_dwmmc(void) { - int ret; #ifdef CONFIG_DWMMC - /* dwmmc initializattion for available channels */ - ret = exynos_dwmmc_init(gd->fdt_blob); - if (ret) - debug("dwmmc init failed\n"); + return exynos_dwmmc_init(gd->fdt_blob); +#else + return 0; #endif +} + +int board_mmc_init(bd_t *bis) +{ + int ret; + + if (get_boot_mode() == BOOT_MODE_SD) { + ret = init_mmc(); + ret |= init_dwmmc(); + } else { + ret = init_dwmmc(); + ret |= init_mmc(); + } -#ifdef CONFIG_SDHCI - /* mmc initializattion for available channels */ - ret = exynos_mmc_init(gd->fdt_blob); if (ret) debug("mmc init failed\n"); -#endif + return ret; } #endif @@ -263,11 +297,15 @@ int board_mmc_init(bd_t *bis) #ifdef CONFIG_DISPLAY_BOARDINFO int checkboard(void) { - const char *board_name; + const char *board_info; - board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL); - printf("Board: %s\n", board_name ? board_name : "unknown"); + board_info = fdt_getprop(gd->fdt_blob, 0, "model", NULL); + printf("Board: %s\n", board_info ? board_info : "unknown"); +#ifdef CONFIG_BOARD_TYPES + board_info = get_board_type(); + printf("Model: %s\n", board_info ? board_info : "unknown"); +#endif return 0; } #endif @@ -307,6 +345,9 @@ int arch_early_init_r(void) #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { +#ifdef CONFIG_SET_DFU_ALT_INFO + set_dfu_alt_info(); +#endif #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG set_board_info(); #endif diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index 03106fd..8766f0c 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -11,6 +11,7 @@ #include <samsung/misc.h> #include <errno.h> #include <version.h> +#include <malloc.h> #include <linux/sizes.h> #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> @@ -21,13 +22,53 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_SET_DFU_ALT_INFO +void set_dfu_alt_info(void) +{ + size_t buf_size = CONFIG_SET_DFU_ALT_BUF_LEN; + ALLOC_CACHE_ALIGN_BUFFER(char, buf, buf_size); + char *alt_info = "Settings not found!"; + char *status = "error!\n"; + char *alt_setting; + char *alt_sep; + int offset = 0; + + puts("DFU alt info setting: "); + + alt_setting = get_dfu_alt_boot(); + if (alt_setting) { + setenv("dfu_alt_boot", alt_setting); + offset = snprintf(buf, buf_size, "%s", alt_setting); + } + + alt_setting = get_dfu_alt_system(); + if (alt_setting) { + if (offset) + alt_sep = ";"; + else + alt_sep = ""; + + offset += snprintf(buf + offset, buf_size - offset, + "%s%s", alt_sep, alt_setting); + } + + if (offset) { + alt_info = buf; + status = "done\n"; + } + + setenv("dfu_alt_info", alt_info); + puts(status); +} +#endif + #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG void set_board_info(void) { char info[64]; - snprintf(info, ARRAY_SIZE(info), "%d.%d", s5p_cpu_rev & 0x0f, - (s5p_cpu_rev & 0xf0) >> 0x04); + snprintf(info, ARRAY_SIZE(info), "%u.%u", (s5p_cpu_rev & 0xf0) >> 4, + s5p_cpu_rev & 0xf); setenv("soc_rev", info); snprintf(info, ARRAY_SIZE(info), "%x", s5p_cpu_id); @@ -38,8 +79,16 @@ void set_board_info(void) setenv("board_rev", info); #endif #ifdef CONFIG_OF_LIBFDT - snprintf(info, ARRAY_SIZE(info), "%s%x-%s.dtb", - CONFIG_SYS_SOC, s5p_cpu_id, CONFIG_SYS_BOARD); + const char *bdtype = ""; + const char *bdname = CONFIG_SYS_BOARD; + +#ifdef CONFIG_BOARD_TYPES + bdtype = get_board_type(); + sprintf(info, "%s%s", bdname, bdtype); + setenv("boardname", info); +#endif + snprintf(info, ARRAY_SIZE(info), "%s%x-%s%s.dtb", + CONFIG_SYS_SOC, s5p_cpu_id, bdname, bdtype); setenv("fdtfile", info); #endif } diff --git a/board/samsung/odroid/Kconfig b/board/samsung/odroid/Kconfig new file mode 100644 index 0000000..8dcfb48 --- /dev/null +++ b/board/samsung/odroid/Kconfig @@ -0,0 +1,15 @@ +if TARGET_ODROID + +config SYS_BOARD + string + default "odroid" + +config SYS_VENDOR + string + default "samsung" + +config SYS_CONFIG_NAME + string + default "odroid" + +endif diff --git a/board/samsung/odroid/MAINTAINERS b/board/samsung/odroid/MAINTAINERS new file mode 100644 index 0000000..2131d36 --- /dev/null +++ b/board/samsung/odroid/MAINTAINERS @@ -0,0 +1,6 @@ +ODROID BOARD +M: Przemyslaw Marczak <p.marczak@samsung.com> +S: Maintained +F: board/samsung/odroid/ +F: include/configs/odroid.h +F: configs/odroid_defconfig diff --git a/board/samsung/odroid/Makefile b/board/samsung/odroid/Makefile new file mode 100644 index 0000000..b98aaeb --- /dev/null +++ b/board/samsung/odroid/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights reserved. +# Przemyslaw Marczak <p.marczak@samsung.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := odroid.o diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c new file mode 100644 index 0000000..fd5d2d2 --- /dev/null +++ b/board/samsung/odroid/odroid.c @@ -0,0 +1,470 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/power.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> +#include <asm/arch/cpu.h> +#include <power/pmic.h> +#include <power/max77686_pmic.h> +#include <errno.h> +#include <usb.h> +#include <usb/s3c_udc.h> +#include <samsung/misc.h> +#include "setup.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_BOARD_TYPES +/* Odroid board types */ +enum { + ODROID_TYPE_U3, + ODROID_TYPE_X2, + ODROID_TYPES, +}; + +void set_board_type(void) +{ + /* Set GPA1 pin 1 to HI - enable XCL205 output */ + writel(XCL205_EN_GPIO_CON_CFG, XCL205_EN_GPIO_CON); + writel(XCL205_EN_GPIO_DAT_CFG, XCL205_EN_GPIO_CON + 0x4); + writel(XCL205_EN_GPIO_PUD_CFG, XCL205_EN_GPIO_CON + 0x8); + writel(XCL205_EN_GPIO_DRV_CFG, XCL205_EN_GPIO_CON + 0xc); + + /* Set GPC1 pin 2 to IN - check XCL205 output state */ + writel(XCL205_STATE_GPIO_CON_CFG, XCL205_STATE_GPIO_CON); + writel(XCL205_STATE_GPIO_PUD_CFG, XCL205_STATE_GPIO_CON + 0x8); + + /* XCL205 - needs some latch time */ + sdelay(200000); + + /* Check GPC1 pin2 - LED supplied by XCL205 - X2 only */ + if (readl(XCL205_STATE_GPIO_DAT) & (1 << XCL205_STATE_GPIO_PIN)) + gd->board_type = ODROID_TYPE_X2; + else + gd->board_type = ODROID_TYPE_U3; +} + +const char *get_board_type(void) +{ + const char *board_type[] = {"u3", "x2"}; + + return board_type[gd->board_type]; +} +#endif + +#ifdef CONFIG_SET_DFU_ALT_INFO +char *get_dfu_alt_system(void) +{ + return getenv("dfu_alt_system"); +} + +char *get_dfu_alt_boot(void) +{ + char *alt_boot; + + switch (get_boot_mode()) { + case BOOT_MODE_SD: + alt_boot = CONFIG_DFU_ALT_BOOT_SD; + break; + case BOOT_MODE_EMMC: + case BOOT_MODE_EMMC_SD: + alt_boot = CONFIG_DFU_ALT_BOOT_EMMC; + break; + default: + alt_boot = NULL; + break; + } + return alt_boot; +} +#endif + +static void board_clock_init(void) +{ + unsigned int set, clr, clr_src_cpu, clr_pll_con0, clr_src_dmc; + struct exynos4x12_clock *clk = (struct exynos4x12_clock *) + samsung_get_base_clock(); + + /* + * CMU_CPU clocks src to MPLL + * Bit values: 0 ; 1 + * MUX_APLL_SEL: FIN_PLL ; FOUT_APLL + * MUX_CORE_SEL: MOUT_APLL ; SCLK_MPLL + * MUX_HPM_SEL: MOUT_APLL ; SCLK_MPLL_USER_C + * MUX_MPLL_USER_SEL_C: FIN_PLL ; SCLK_MPLL + */ + clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1) | + MUX_HPM_SEL(1) | MUX_MPLL_USER_SEL_C(1); + set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1) | MUX_HPM_SEL(1) | + MUX_MPLL_USER_SEL_C(1); + + clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set); + + /* Wait for mux change */ + while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING) + continue; + + /* Set APLL to 1000MHz */ + clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1); + set = SDIV(0) | PDIV(3) | MDIV(125) | FSEL(1); + + clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set); + + /* Wait for PLL to be locked */ + while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT)) + continue; + + /* Set CMU_CPU clocks src to APLL */ + set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0) | MUX_HPM_SEL(0) | + MUX_MPLL_USER_SEL_C(1); + clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set); + + /* Wait for mux change */ + while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING) + continue; + + set = CORE_RATIO(0) | COREM0_RATIO(2) | COREM1_RATIO(5) | + PERIPH_RATIO(0) | ATB_RATIO(4) | PCLK_DBG_RATIO(1) | + APLL_RATIO(0) | CORE2_RATIO(0); + /* + * Set dividers for MOUTcore = 1000 MHz + * coreout = MOUT / (ratio + 1) = 1000 MHz (0) + * corem0 = armclk / (ratio + 1) = 333 MHz (2) + * corem1 = armclk / (ratio + 1) = 166 MHz (5) + * periph = armclk / (ratio + 1) = 1000 MHz (0) + * atbout = MOUT / (ratio + 1) = 200 MHz (4) + * pclkdbgout = atbout / (ratio + 1) = 100 MHz (1) + * sclkapll = MOUTapll / (ratio + 1) = 1000 MHz (0) + * core2out = core_out / (ratio + 1) = 1000 MHz (0) (armclk) + */ + clr = CORE_RATIO(7) | COREM0_RATIO(7) | COREM1_RATIO(7) | + PERIPH_RATIO(7) | ATB_RATIO(7) | PCLK_DBG_RATIO(7) | + APLL_RATIO(7) | CORE2_RATIO(7); + + clrsetbits_le32(&clk->div_cpu0, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING) + continue; + + /* + * For MOUThpm = 1000 MHz (MOUTapll) + * doutcopy = MOUThpm / (ratio + 1) = 200 (4) + * sclkhpm = doutcopy / (ratio + 1) = 200 (4) + * cores_out = armclk / (ratio + 1) = 1000 (0) + */ + clr = COPY_RATIO(7) | HPM_RATIO(7) | CORES_RATIO(7); + set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(0); + + clrsetbits_le32(&clk->div_cpu1, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_cpu1) & DIV_STAT_CPU1_CHANGING) + continue; + + /* + * Set CMU_DMC clocks src to APLL + * Bit values: 0 ; 1 + * MUX_C2C_SEL: SCLKMPLL ; SCLKAPLL + * MUX_DMC_BUS_SEL: SCLKMPLL ; SCLKAPLL + * MUX_DPHY_SEL: SCLKMPLL ; SCLKAPLL + * MUX_MPLL_SEL: FINPLL ; MOUT_MPLL_FOUT + * MUX_PWI_SEL: 0110 (MPLL); 0111 (EPLL); 1000 (VPLL); 0(XXTI) + * MUX_G2D_ACP0_SEL: SCLKMPLL ; SCLKAPLL + * MUX_G2D_ACP1_SEL: SCLKEPLL ; SCLKVPLL + * MUX_G2D_ACP_SEL: OUT_ACP0 ; OUT_ACP1 + */ + clr_src_dmc = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) | + MUX_DPHY_SEL(1) | MUX_MPLL_SEL(1) | + MUX_PWI_SEL(15) | MUX_G2D_ACP0_SEL(1) | + MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1); + set = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) | MUX_DPHY_SEL(1) | + MUX_MPLL_SEL(0) | MUX_PWI_SEL(0) | MUX_G2D_ACP0_SEL(1) | + MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1); + + clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set); + + /* Wait for mux change */ + while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING) + continue; + + /* Set MPLL to 880MHz */ + set = SDIV(0) | PDIV(3) | MDIV(110) | FSEL(0) | PLL_ENABLE(1); + + clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set); + + /* Wait for PLL to be locked */ + while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT)) + continue; + + /* Switch back CMU_DMC mux */ + set = MUX_C2C_SEL(0) | MUX_DMC_BUS_SEL(0) | MUX_DPHY_SEL(0) | + MUX_MPLL_SEL(1) | MUX_PWI_SEL(8) | MUX_G2D_ACP0_SEL(0) | + MUX_G2D_ACP1_SEL(0) | MUX_G2D_ACP_SEL(0); + + clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set); + + /* Wait for mux change */ + while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING) + continue; + + /* CLK_DIV_DMC0 */ + clr = ACP_RATIO(7) | ACP_PCLK_RATIO(7) | DPHY_RATIO(7) | + DMC_RATIO(7) | DMCD_RATIO(7) | DMCP_RATIO(7); + /* + * For: + * MOUTdmc = 880 MHz + * MOUTdphy = 880 MHz + * + * aclk_acp = MOUTdmc / (ratio + 1) = 220 (3) + * pclk_acp = aclk_acp / (ratio + 1) = 110 (1) + * sclk_dphy = MOUTdphy / (ratio + 1) = 440 (1) + * sclk_dmc = MOUTdmc / (ratio + 1) = 440 (1) + * aclk_dmcd = sclk_dmc / (ratio + 1) = 220 (1) + * aclk_dmcp = aclk_dmcd / (ratio + 1) = 110 (1) + */ + set = ACP_RATIO(3) | ACP_PCLK_RATIO(1) | DPHY_RATIO(1) | + DMC_RATIO(1) | DMCD_RATIO(1) | DMCP_RATIO(1); + + clrsetbits_le32(&clk->div_dmc0, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_dmc0) & DIV_STAT_DMC0_CHANGING) + continue; + + /* CLK_DIV_DMC1 */ + clr = G2D_ACP_RATIO(15) | C2C_RATIO(7) | PWI_RATIO(15) | + C2C_ACLK_RATIO(7) | DVSEM_RATIO(127) | DPM_RATIO(127); + /* + * For: + * MOUTg2d = 880 MHz + * MOUTc2c = 880 Mhz + * MOUTpwi = 108 MHz + * + * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 440 (1) + * sclk_c2c = MOUTc2c / (ratio + 1) = 440 (1) + * aclk_c2c = sclk_c2c / (ratio + 1) = 220 (1) + * sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5) + */ + set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) | + C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1); + + clrsetbits_le32(&clk->div_dmc1, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_dmc1) & DIV_STAT_DMC1_CHANGING) + continue; + + /* CLK_SRC_PERIL0 */ + clr = UART0_SEL(15) | UART1_SEL(15) | UART2_SEL(15) | + UART3_SEL(15) | UART4_SEL(15); + /* + * Set CLK_SRC_PERIL0 clocks src to MPLL + * src values: 0(XXTI); 1(XusbXTI); 2(SCLK_HDMI24M); 3(SCLK_USBPHY0); + * 5(SCLK_HDMIPHY); 6(SCLK_MPLL_USER_T); 7(SCLK_EPLL); + * 8(SCLK_VPLL) + * + * Set all to SCLK_MPLL_USER_T + */ + set = UART0_SEL(6) | UART1_SEL(6) | UART2_SEL(6) | UART3_SEL(6) | + UART4_SEL(6); + + clrsetbits_le32(&clk->src_peril0, clr, set); + + /* CLK_DIV_PERIL0 */ + clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) | + UART3_RATIO(15) | UART4_RATIO(15); + /* + * For MOUTuart0-4: 880MHz + * + * SCLK_UARTx = MOUTuartX / (ratio + 1) = 110 (7) + */ + set = UART0_RATIO(7) | UART1_RATIO(7) | UART2_RATIO(7) | + UART3_RATIO(7) | UART4_RATIO(7); + + clrsetbits_le32(&clk->div_peril0, clr, set); + + while (readl(&clk->div_stat_peril0) & DIV_STAT_PERIL0_CHANGING) + continue; + + /* CLK_DIV_FSYS1 */ + clr = MMC0_RATIO(15) | MMC0_PRE_RATIO(255) | MMC1_RATIO(15) | + MMC1_PRE_RATIO(255); + /* + * For MOUTmmc0-3 = 880 MHz (MPLL) + * + * DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 110 (7) + * sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 60 (1) + * DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 110 (7) + * sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 60 (1) + */ + set = MMC0_RATIO(7) | MMC0_PRE_RATIO(1) | MMC1_RATIO(7) | + MMC1_PRE_RATIO(1); + + clrsetbits_le32(&clk->div_fsys1, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING) + continue; + + /* CLK_DIV_FSYS2 */ + clr = MMC2_RATIO(15) | MMC2_PRE_RATIO(255) | MMC3_RATIO(15) | + MMC3_PRE_RATIO(255); + /* + * For MOUTmmc0-3 = 880 MHz (MPLL) + * + * DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 110 (7) + * sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 60 (1) + * DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 110 (7) + * sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 60 (1) + */ + set = MMC2_RATIO(7) | MMC2_PRE_RATIO(1) | MMC3_RATIO(7) | + MMC3_PRE_RATIO(1); + + clrsetbits_le32(&clk->div_fsys2, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_fsys2) & DIV_STAT_FSYS2_CHANGING) + continue; + + /* CLK_DIV_FSYS3 */ + clr = MMC4_RATIO(15) | MMC4_PRE_RATIO(255); + /* + * For MOUTmmc4 = 880 MHz (MPLL) + * + * DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 110 (7) + * sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 110 (0) + */ + set = MMC4_RATIO(7) | MMC4_PRE_RATIO(0); + + clrsetbits_le32(&clk->div_fsys3, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_fsys3) & DIV_STAT_FSYS3_CHANGING) + continue; + + return; +} + +static void board_gpio_init(void) +{ + /* eMMC Reset Pin */ + gpio_cfg_pin(EXYNOS4X12_GPIO_K12, S5P_GPIO_FUNC(0x1)); + gpio_set_pull(EXYNOS4X12_GPIO_K12, S5P_GPIO_PULL_NONE); + gpio_set_drv(EXYNOS4X12_GPIO_K12, S5P_GPIO_DRV_4X); + + /* Enable FAN (Odroid U3) */ + gpio_set_pull(EXYNOS4X12_GPIO_D00, S5P_GPIO_PULL_UP); + gpio_set_drv(EXYNOS4X12_GPIO_D00, S5P_GPIO_DRV_4X); + gpio_direction_output(EXYNOS4X12_GPIO_D00, 1); + + /* OTG Vbus output (Odroid U3+) */ + gpio_set_pull(EXYNOS4X12_GPIO_L20, S5P_GPIO_PULL_NONE); + gpio_set_drv(EXYNOS4X12_GPIO_L20, S5P_GPIO_DRV_4X); + gpio_direction_output(EXYNOS4X12_GPIO_L20, 0); + + /* OTG INT (Odroid U3+) */ + gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP); + gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X); + gpio_direction_input(EXYNOS4X12_GPIO_X31); +} + +static int pmic_init_max77686(void) +{ + struct pmic *p = pmic_get("MAX77686_PMIC"); + + if (pmic_probe(p)) + return -ENODEV; + + /* Set LDO Voltage */ + max77686_set_ldo_voltage(p, 20, 1800000); /* LDO20 eMMC */ + max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 SD */ + max77686_set_ldo_voltage(p, 22, 2800000); /* LDO22 eMMC */ + + return 0; +} + +#ifdef CONFIG_SYS_I2C_INIT_BOARD +static void board_init_i2c(void) +{ + /* I2C_0 */ + if (exynos_pinmux_config(PERIPH_ID_I2C0, PINMUX_FLAG_NONE)) + debug("I2C%d not configured\n", (I2C_0)); +} +#endif + +int exynos_early_init_f(void) +{ + board_clock_init(); + board_gpio_init(); + + return 0; +} + +int exynos_init(void) +{ + /* The last MB of memory is reserved for secure firmware */ + gd->ram_size -= SZ_1M; + gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= SZ_1M; + + return 0; +} + +int exynos_power_init(void) +{ +#ifdef CONFIG_SYS_I2C_INIT_BOARD + board_init_i2c(); +#endif + pmic_init(I2C_0); + pmic_init_max77686(); + + return 0; +} + +#ifdef CONFIG_USB_GADGET +static int s5pc210_phy_control(int on) +{ + struct pmic *p_pmic; + + p_pmic = pmic_get("MAX77686_PMIC"); + if (!p_pmic) + return -ENODEV; + + if (pmic_probe(p_pmic)) + return -1; + + if (on) + return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON); + else + return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM); +} + +struct s3c_plat_otg_data s5pc210_otg_data = { + .phy_control = s5pc210_phy_control, + .regs_phy = EXYNOS4X12_USBPHY_BASE, + .regs_otg = EXYNOS4X12_USBOTG_BASE, + .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, + .usb_flags = PHY0_SLEEP, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + debug("USB_udc_probe\n"); + return s3c_udc_probe(&s5pc210_otg_data); +} +#endif + +void reset_misc(void) +{ + /* Reset eMMC*/ + gpio_set_value(EXYNOS4X12_GPIO_K12, 0); + mdelay(10); + gpio_set_value(EXYNOS4X12_GPIO_K12, 1); +} diff --git a/board/samsung/odroid/setup.h b/board/samsung/odroid/setup.h new file mode 100644 index 0000000..3e48dad --- /dev/null +++ b/board/samsung/odroid/setup.h @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ODROIDU3_SETUP__ +#define __ODROIDU3_SETUP__ + +/* A/M PLL_CON0 */ +#define SDIV(x) ((x) & 0x7) +#define PDIV(x) (((x) & 0x3f) << 8) +#define MDIV(x) (((x) & 0x3ff) << 16) +#define FSEL(x) (((x) & 0x1) << 27) +#define PLL_LOCKED_BIT (0x1 << 29) +#define PLL_ENABLE(x) (((x) & 0x1) << 31) + +/* CLK_SRC_CPU */ +#define MUX_APLL_SEL(x) ((x) & 0x1) +#define MUX_CORE_SEL(x) (((x) & 0x1) << 16) +#define MUX_HPM_SEL(x) (((x) & 0x1) << 20) +#define MUX_MPLL_USER_SEL_C(x) (((x) & 0x1) << 24) + +#define MUX_STAT_CHANGING 0x100 + +/* CLK_MUX_STAT_CPU */ +#define APLL_SEL(x) ((x) & 0x7) +#define CORE_SEL(x) (((x) & 0x7) << 16) +#define HPM_SEL(x) (((x) & 0x7) << 20) +#define MPLL_USER_SEL_C(x) (((x) & 0x7) << 24) +#define MUX_STAT_CPU_CHANGING (APLL_SEL(MUX_STAT_CHANGING) | \ + CORE_SEL(MUX_STAT_CHANGING) | \ + HPM_SEL(MUX_STAT_CHANGING) | \ + MPLL_USER_SEL_C(MUX_STAT_CHANGING)) + +/* CLK_DIV_CPU0 */ +#define CORE_RATIO(x) ((x) & 0x7) +#define COREM0_RATIO(x) (((x) & 0x7) << 4) +#define COREM1_RATIO(x) (((x) & 0x7) << 8) +#define PERIPH_RATIO(x) (((x) & 0x7) << 12) +#define ATB_RATIO(x) (((x) & 0x7) << 16) +#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20) +#define APLL_RATIO(x) (((x) & 0x7) << 24) +#define CORE2_RATIO(x) (((x) & 0x7) << 28) + +/* CLK_DIV_STAT_CPU0 */ +#define DIV_CORE(x) ((x) & 0x1) +#define DIV_COREM0(x) (((x) & 0x1) << 4) +#define DIV_COREM1(x) (((x) & 0x1) << 8) +#define DIV_PERIPH(x) (((x) & 0x1) << 12) +#define DIV_ATB(x) (((x) & 0x1) << 16) +#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20) +#define DIV_APLL(x) (((x) & 0x1) << 24) +#define DIV_CORE2(x) (((x) & 0x1) << 28) + +#define DIV_STAT_CHANGING 0x1 +#define DIV_STAT_CPU0_CHANGING (DIV_CORE(DIV_STAT_CHANGING) | \ + DIV_COREM0(DIV_STAT_CHANGING) | \ + DIV_COREM1(DIV_STAT_CHANGING) | \ + DIV_PERIPH(DIV_STAT_CHANGING) | \ + DIV_ATB(DIV_STAT_CHANGING) | \ + DIV_PCLK_DBG(DIV_STAT_CHANGING) | \ + DIV_APLL(DIV_STAT_CHANGING) | \ + DIV_CORE2(DIV_STAT_CHANGING)) + +/* CLK_DIV_CPU1 */ +#define COPY_RATIO(x) ((x) & 0x7) +#define HPM_RATIO(x) (((x) & 0x7) << 4) +#define CORES_RATIO(x) (((x) & 0x7) << 8) + +/* CLK_DIV_STAT_CPU1 */ +#define DIV_COPY(x) ((x) & 0x7) +#define DIV_HPM(x) (((x) & 0x1) << 4) +#define DIV_CORES(x) (((x) & 0x1) << 8) + +#define DIV_STAT_CPU1_CHANGING (DIV_COPY(DIV_STAT_CHANGING) | \ + DIV_HPM(DIV_STAT_CHANGING) | \ + DIV_CORES(DIV_STAT_CHANGING)) + +/* CLK_SRC_DMC */ +#define MUX_C2C_SEL(x) ((x) & 0x1) +#define MUX_DMC_BUS_SEL(x) (((x) & 0x1) << 4) +#define MUX_DPHY_SEL(x) (((x) & 0x1) << 8) +#define MUX_MPLL_SEL(x) (((x) & 0x1) << 12) +#define MUX_PWI_SEL(x) (((x) & 0xf) << 16) +#define MUX_G2D_ACP0_SEL(x) (((x) & 0x1) << 20) +#define MUX_G2D_ACP1_SEL(x) (((x) & 0x1) << 24) +#define MUX_G2D_ACP_SEL(x) (((x) & 0x1) << 28) + +/* CLK_MUX_STAT_DMC */ +#define C2C_SEL(x) (((x)) & 0x7) +#define DMC_BUS_SEL(x) (((x) & 0x7) << 4) +#define DPHY_SEL(x) (((x) & 0x7) << 8) +#define MPLL_SEL(x) (((x) & 0x7) << 12) +/* #define PWI_SEL(x) (((x) & 0xf) << 16) - Reserved */ +#define G2D_ACP0_SEL(x) (((x) & 0x7) << 20) +#define G2D_ACP1_SEL(x) (((x) & 0x7) << 24) +#define G2D_ACP_SEL(x) (((x) & 0x7) << 28) + +#define MUX_STAT_DMC_CHANGING (C2C_SEL(MUX_STAT_CHANGING) | \ + DMC_BUS_SEL(MUX_STAT_CHANGING) | \ + DPHY_SEL(MUX_STAT_CHANGING) | \ + MPLL_SEL(MUX_STAT_CHANGING) |\ + G2D_ACP0_SEL(MUX_STAT_CHANGING) | \ + G2D_ACP1_SEL(MUX_STAT_CHANGING) | \ + G2D_ACP_SEL(MUX_STAT_CHANGING)) + +/* CLK_DIV_DMC0 */ +#define ACP_RATIO(x) ((x) & 0x7) +#define ACP_PCLK_RATIO(x) (((x) & 0x7) << 4) +#define DPHY_RATIO(x) (((x) & 0x7) << 8) +#define DMC_RATIO(x) (((x) & 0x7) << 12) +#define DMCD_RATIO(x) (((x) & 0x7) << 16) +#define DMCP_RATIO(x) (((x) & 0x7) << 20) + +/* CLK_DIV_STAT_DMC0 */ +#define DIV_ACP(x) ((x) & 0x1) +#define DIV_ACP_PCLK(x) (((x) & 0x1) << 4) +#define DIV_DPHY(x) (((x) & 0x1) << 8) +#define DIV_DMC(x) (((x) & 0x1) << 12) +#define DIV_DMCD(x) (((x) & 0x1) << 16) +#define DIV_DMCP(x) (((x) & 0x1) << 20) + +#define DIV_STAT_DMC0_CHANGING (DIV_ACP(DIV_STAT_CHANGING) | \ + DIV_ACP_PCLK(DIV_STAT_CHANGING) | \ + DIV_DPHY(DIV_STAT_CHANGING) | \ + DIV_DMC(DIV_STAT_CHANGING) | \ + DIV_DMCD(DIV_STAT_CHANGING) | \ + DIV_DMCP(DIV_STAT_CHANGING)) + +/* CLK_DIV_DMC1 */ +#define G2D_ACP_RATIO(x) ((x) & 0xf) +#define C2C_RATIO(x) (((x) & 0x7) << 4) +#define PWI_RATIO(x) (((x) & 0xf) << 8) +#define C2C_ACLK_RATIO(x) (((x) & 0x7) << 12) +#define DVSEM_RATIO(x) (((x) & 0x7f) << 16) +#define DPM_RATIO(x) (((x) & 0x7f) << 24) + +/* CLK_DIV_STAT_DMC1 */ +#define DIV_G2D_ACP(x) ((x) & 0x1) +#define DIV_C2C(x) (((x) & 0x1) << 4) +#define DIV_PWI(x) (((x) & 0x1) << 8) +#define DIV_C2C_ACLK(x) (((x) & 0x1) << 12) +#define DIV_DVSEM(x) (((x) & 0x1) << 16) +#define DIV_DPM(x) (((x) & 0x1) << 24) + +#define DIV_STAT_DMC1_CHANGING (DIV_G2D_ACP(DIV_STAT_CHANGING) | \ + DIV_C2C(DIV_STAT_CHANGING) | \ + DIV_PWI(DIV_STAT_CHANGING) | \ + DIV_C2C_ACLK(DIV_STAT_CHANGING) | \ + DIV_DVSEM(DIV_STAT_CHANGING) | \ + DIV_DPM(DIV_STAT_CHANGING)) + +/* Set CLK_SRC_PERIL0 */ +#define UART4_SEL(x) (((x) & 0xf) << 16) +#define UART3_SEL(x) (((x) & 0xf) << 12) +#define UART2_SEL(x) (((x) & 0xf) << 8) +#define UART1_SEL(x) (((x) & 0xf) << 4) +#define UART0_SEL(x) ((x) & 0xf) + +/* Set CLK_DIV_PERIL0 */ +#define UART4_RATIO(x) (((x) & 0xf) << 16) +#define UART3_RATIO(x) (((x) & 0xf) << 12) +#define UART2_RATIO(x) (((x) & 0xf) << 8) +#define UART1_RATIO(x) (((x) & 0xf) << 4) +#define UART0_RATIO(x) ((x) & 0xf) + +/* Set CLK_DIV_STAT_PERIL0 */ +#define DIV_UART4(x) (((x) & 0x1) << 16) +#define DIV_UART3(x) (((x) & 0x1) << 12) +#define DIV_UART2(x) (((x) & 0x1) << 8) +#define DIV_UART1(x) (((x) & 0x1) << 4) +#define DIV_UART0(x) ((x) & 0x1) + +#define DIV_STAT_PERIL0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \ + DIV_UART3(DIV_STAT_CHANGING) | \ + DIV_UART2(DIV_STAT_CHANGING) | \ + DIV_UART1(DIV_STAT_CHANGING) | \ + DIV_UART0(DIV_STAT_CHANGING)) + +/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO(x) ((x) & 0xf) +#define MMC0_PRE_RATIO(x) (((x) & 0xff) << 8) +#define MMC1_RATIO(x) (((x) & 0xf) << 16) +#define MMC1_PRE_RATIO(x) (((x) & 0xff) << 24) + +/* CLK_DIV_STAT_FSYS1 */ +#define DIV_MMC0(x) ((x) & 1) +#define DIV_MMC0_PRE(x) (((x) & 1) << 8) +#define DIV_MMC1(x) (((x) & 1) << 16) +#define DIV_MMC1_PRE(x) (((x) & 1) << 24) + +#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \ + DIV_MMC0_PRE(DIV_STAT_CHANGING) | \ + DIV_MMC1(DIV_STAT_CHANGING) | \ + DIV_MMC1_PRE(DIV_STAT_CHANGING)) + +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO(x) ((x) & 0xf) +#define MMC2_PRE_RATIO(x) (((x) & 0xff) << 8) +#define MMC3_RATIO(x) (((x) & 0xf) << 16) +#define MMC3_PRE_RATIO(x) (((x) & 0xff) << 24) + +/* CLK_DIV_STAT_FSYS2 */ +#define DIV_MMC2(x) ((x) & 0x1) +#define DIV_MMC2_PRE(x) (((x) & 0x1) << 8) +#define DIV_MMC3(x) (((x) & 0x1) << 16) +#define DIV_MMC3_PRE(x) (((x) & 0x1) << 24) + +#define DIV_STAT_FSYS2_CHANGING (DIV_MMC2(DIV_STAT_CHANGING) | \ + DIV_MMC2_PRE(DIV_STAT_CHANGING) | \ + DIV_MMC3(DIV_STAT_CHANGING) | \ + DIV_MMC3_PRE(DIV_STAT_CHANGING)) + +/* CLK_DIV_FSYS3 */ +#define MMC4_RATIO(x) ((x) & 0x7) +#define MMC4_PRE_RATIO(x) (((x) & 0xff) << 8) + +/* CLK_DIV_STAT_FSYS3 */ +#define DIV_MMC4(x) ((x) & 0x1) +#define DIV_MMC4_PRE(x) (((x) & 0x1) << 8) + +#define DIV_STAT_FSYS3_CHANGING (DIV_MMC4(DIV_STAT_CHANGING) | \ + DIV_MMC4_PRE(DIV_STAT_CHANGING)) + +/* XCL205 GPIO config - Odroid U3 */ +#define XCL205_GPIO_BASE EXYNOS4X12_GPIO_PART1_BASE +#define XCL205_EN_GPIO_OFFSET 0x20 /* GPA1 */ +#define XCL205_EN_GPIO_PIN 1 +#define XCL205_EN_GPIO_CON (XCL205_GPIO_BASE + \ + XCL205_EN_GPIO_OFFSET) +#define XCL205_EN_GPIO_CON_CFG (S5P_GPIO_OUTPUT << \ + 4 * XCL205_EN_GPIO_PIN) +#define XCL205_EN_GPIO_DAT_CFG (0x1 << XCL205_EN_GPIO_PIN) +#define XCL205_EN_GPIO_PUD_CFG (S5P_GPIO_PULL_UP << \ + 2 * XCL205_EN_GPIO_PIN) +#define XCL205_EN_GPIO_DRV_CFG (S5P_GPIO_DRV_4X << \ + 2 * XCL205_EN_GPIO_PIN) + +#define XCL205_STATE_GPIO_OFFSET 0x80 /* GPC1 */ +#define XCL205_STATE_GPIO_PIN 2 +#define XCL205_STATE_GPIO_CON (XCL205_GPIO_BASE + \ + XCL205_STATE_GPIO_OFFSET) +#define XCL205_STATE_GPIO_DAT XCL205_STATE_GPIO_CON + 0x4 +#define XCL205_STATE_GPIO_CON_CFG (S5P_GPIO_INPUT << \ + 4 * XCL205_STATE_GPIO_PIN) +#define XCL205_STATE_GPIO_PUD_CFG (S5P_GPIO_PULL_NONE << \ + 2 * XCL205_STATE_GPIO_PIN) + +#ifdef CONFIG_BOARD_TYPES +extern void sdelay(unsigned long); +#endif + +#endif /*__ODROIDU3_SETUP__ */ diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c index 183c522..270ee83 100644 --- a/board/samsung/smdk5420/smdk5420.c +++ b/board/samsung/smdk5420/smdk5420.c @@ -10,11 +10,14 @@ #include <i2c.h> #include <lcd.h> #include <spi.h> +#include <errno.h> #include <asm/arch/board.h> #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> +#include <asm/arch/system.h> #include <asm/arch/dp_info.h> +#include <power/tps65090_pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,95 +43,57 @@ int exynos_init(void) } #ifdef CONFIG_LCD -void cfg_lcd_gpio(void) +static int has_edp_bridge(void) { - /* For Backlight */ - gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT); - gpio_set_value(EXYNOS5420_GPIO_B20, 1); + int node; + + node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_PARADE_PS8625); - /* LCD power on */ - gpio_cfg_pin(EXYNOS5420_GPIO_X15, S5P_GPIO_OUTPUT); - gpio_set_value(EXYNOS5420_GPIO_X15, 1); + /* No node for bridge in device tree. */ + if (node <= 0) + return 0; - /* Set Hotplug detect for DP */ - gpio_cfg_pin(EXYNOS5420_GPIO_X07, S5P_GPIO_FUNC(0x3)); + /* Default is with bridge ic */ + return 1; } -vidinfo_t panel_info = { - .vl_freq = 60, - .vl_col = 2560, - .vl_row = 1600, - .vl_width = 2560, - .vl_height = 1600, - .vl_clkp = CONFIG_SYS_LOW, - .vl_hsp = CONFIG_SYS_LOW, - .vl_vsp = CONFIG_SYS_LOW, - .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */ - - /* wDP panel timing infomation */ - .vl_hspw = 32, - .vl_hbpd = 80, - .vl_hfpd = 48, - - .vl_vspw = 6, - .vl_vbpd = 37, - .vl_vfpd = 3, - .vl_cmd_allow_len = 0xf, - - .win_id = 3, - .cfg_gpio = cfg_lcd_gpio, - .backlight_on = NULL, - .lcd_power_on = NULL, - .reset_lcd = NULL, - .dual_lcd_enabled = 0, - - .init_delay = 0, - .power_on_delay = 0, - .reset_delay = 0, - .interface_mode = FIMD_RGB_INTERFACE, - .dp_enabled = 1, -}; - -static struct edp_device_info edp_info = { - .disp_info = { - .h_res = 2560, - .h_sync_width = 32, - .h_back_porch = 80, - .h_front_porch = 48, - .v_res = 1600, - .v_sync_width = 6, - .v_back_porch = 37, - .v_front_porch = 3, - .v_sync_rate = 60, - }, - .lt_info = { - .lt_status = DP_LT_NONE, - }, - .video_info = { - .master_mode = 0, - .bist_mode = DP_DISABLE, - .bist_pattern = NO_PATTERN, - .h_sync_polarity = 0, - .v_sync_polarity = 0, - .interlaced = 0, - .color_space = COLOR_RGB, - .dynamic_range = VESA, - .ycbcr_coeff = COLOR_YCBCR601, - .color_depth = COLOR_8, - }, -}; - -static struct exynos_dp_platform_data dp_platform_data = { - .phy_enable = set_dp_phy_ctrl, - .edp_dev_info = &edp_info, -}; - -void init_panel_info(vidinfo_t *vid) +void exynos_lcd_power_on(void) { - vid->rgb_mode = MODE_RGB_P; + int ret; + +#ifdef CONFIG_POWER_TPS65090 + ret = tps65090_init(); + if (ret < 0) { + printf("%s: tps65090_init() failed\n", __func__); + return; + } + + tps65090_fet_enable(6); +#endif + + mdelay(5); + + /* TODO(ajaykumar.rs@samsung.com): Use device tree */ + gpio_direction_output(EXYNOS5420_GPIO_X35, 1); /* EDP_SLP# */ + mdelay(10); + gpio_direction_output(EXYNOS5420_GPIO_Y77, 1); /* EDP_RST# */ + gpio_direction_input(EXYNOS5420_GPIO_X26); /* EDP_HPD */ + gpio_set_pull(EXYNOS5420_GPIO_X26, S5P_GPIO_PULL_NONE); - exynos_set_dp_platform_data(&dp_platform_data); + if (has_edp_bridge()) + if (parade_init(gd->fdt_blob)) + printf("%s: ps8625_init() failed\n", __func__); +} + +void exynos_backlight_on(unsigned int onoff) +{ + /* For PWM */ + gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_FUNC(0x1)); + gpio_set_value(EXYNOS5420_GPIO_B20, 1); + +#ifdef CONFIG_POWER_TPS65090 + tps65090_fet_enable(1); +#endif } #endif diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index 0e5149c..80701f5 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -22,6 +22,7 @@ config SYS_CONFIG_NAME config CONS_INDEX int "UART used for console" + range 1 6 default 1 help The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig new file mode 100644 index 0000000..a1c7ac5 --- /dev/null +++ b/configs/odroid_defconfig @@ -0,0 +1,3 @@ +CONFIG_ARM=y +CONFIG_ARCH_EXYNOS=y +CONFIG_TARGET_ODROID=y diff --git a/doc/README.odroid b/doc/README.odroid new file mode 100644 index 0000000..528bb95 --- /dev/null +++ b/doc/README.odroid @@ -0,0 +1,143 @@ + U-boot for Odroid X2/U3 +======================== + +1. Summary +========== +This is a quick instruction for setup Odroid boards based on Exynos4412. +Board config: odroid_config + +2. Supported devices +==================== +This U-BOOT config can be used on two boards: +- Odroid U3 +- Odroid X2 +with CPU Exynos 4412 rev 2.0 and 2GB of RAM + +3. Boot sequence +================ +iROM->BL1->(BL2 + TrustZone)->U-BOOT + +This version of U-BOOT doesn't implement SPL but it is required(BL2) +and can be found in "boot.tar.gz" from here: +http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boot.tar.gz +or here: +http://odroid.in/guides/ubuntu-lfs/boot.tar.gz + +4. Boot media layout +==================== +The table below shows SD/eMMC cards layout for U-boot. +The block offset is starting from 0 and the block size is 512B. + ------------------------------------- +| Binary | Block offset| part type | +| name | SD | eMMC |(eMMC only)| + ------------------------------------- +| Bl1 | 1 | 0 | 1 (boot) | +| Bl2 | 31 | 30 | 1 (boot) | +| U-boot | 63 | 62 | 1 (boot) | +| Tzsw | 2111 | 2110 | 1 (boot) | +| Uboot Env | 2500 | 2500 | 0 (user) | + ------------------------------------- + +5. Prepare the SD boot card - with SD card reader +================================================= +To prepare bootable media you need boot binaries provided by hardkernel. +File "boot.tar.gz" (link in point 3.) contains: +- E4412_S.bl1.HardKernel.bin +- E4412_S.tzsw.signed.bin +- bl2.signed.bin +- sd_fusing.sh +- u-boot.bin + +This is all you need to boot this board. But if you want to use your custom +u-boot then you need to change u-boot.bin with your own u-boot binary* +and run the script "sd_fusing.sh" - this script is valid only for SD card. + +*note: +The proper binary file of current U-boot is u-boot-dtb.bin. + +quick steps for Linux: +- extract boot.tar.gz +- put any SD card into the SD reader +- check the device with "dmesg" +- run ./sd_fusing.sh /dev/sdX - where X is SD card device (but not a partition) +Check if Hardkernel U-boot is booting, and next do the same with your U-boot. + +6. Prepare the eMMC boot card + with a eMMC card reader (boot from eMMC card slot) +===================================================== +To boot the device from the eMMC slot you should use a special card reader +which supports eMMC partiion switch. All of the boot binaries are stored +on the eMMC boot partition which is normally hidden. + +The "sd_fusing.sh" script can be used after updating offsets of binaries +according to the table from point 4. Be sure that you are working on the right +eMMC partition - its size is usually very small, about 1-4 MiB. + +7. Prepare the eMMC boot card + with a SD card reader (boot from SD card slot) +================================================= +If you have an eMMC->microSD adapter you can prepare the card as in point 5. +But then the device can boot only from the SD card slot. + +8. Prepare the boot media using Hardkernel U-boot +================================================= +You can update the U-boot to the custom one if you have an working bootloader +delivered with the board on a eMMC/SD card. Then follow the steps: +- install the android fastboot tool +- connect a micro usb cable to the board +- on the U-boot prompt, run command: fastboot (as a root) +- on the host, run command: "fastboot flash bootloader u-boot-dtb.bin" +- the custom U-boot should start after the board resets. + +9. Partition layout +==================== +Default U-boot environment is setup for fixed partiion layout. + +Partition table: MSDOS. Disk layout and files as listed in the table below. + ----- ------ ------ ------ -------- --------------------------------- +| Num | Name | FS | Size | Offset | Reguired files | +| | | Type | MiB | MiB | | + ----- ------ ------ ------ -------- --------------------------------- +| 1 | BOOT | fat | 100 | 2 | kernel, fdt** | +| 2 | ROOT | ext4 | - | | any Linux system | + ----- ------ ------ ------ -------- --------------------------------- + +**note: +Supported fdt files are: +- exynos4412-odroidx2.dtb +- exynos4412-odroidu3.dtb + +Supported kernel files are: +- Image.itb +- zImage +- uImage + +The default environmental variable "dfu_alt_info" is set* for above layout. +Each partition size is just an example, dfu_alt_info tries init two partitions. +The size of each is not important. + +*note: +$dfu_alt_info is set on a boot time and it is concatenated using two variables: +- $dfu_alt_boot(set dynamically) +- $dfu_alt_system(from current env). + +To add any changes to dfu_alt_info - please modify $dfu_alt_system only. +Changes are visible after board reset. + +10. The environment and booting the kernel +========================================== +There are three macros defined in config for various boot options: +Two for both, kernel with device tree support and also without it: +- boot_uimg - load uImage +- boot_zimg - load zImage +If proper fdt file exists then it will be automatically loaded, +so for old kernel types, please remove fdt file from boot partition. + +The third boot option for multi image support (more info: doc/uImage.FIT/) +- boot_fit - for binary file: "Image.itb" + +Default boot command: "autoboot" +And the boot sequence is: +- boot_fit - if "Image.itb" exists +- boot_zimg - if "zImage" exists +- boot_uimg - if "uImage" exists diff --git a/doc/device-tree-bindings/video/exynos-fb.txt b/doc/device-tree-bindings/video/exynos-fb.txt index bb7441c..dc4e44f 100644 --- a/doc/device-tree-bindings/video/exynos-fb.txt +++ b/doc/device-tree-bindings/video/exynos-fb.txt @@ -55,6 +55,12 @@ Board(panel specific): samsung,pclk-name: parent clock identifier: 1(MPLL), 2(EPLL), 3(VPLL) samsung,sclk-div: parent_clock/source_clock ratio samsung,dual-lcd-enabled: 1 if you support two LCD, else 0 + samsung,disable-sysmmu: Define this if you want to disable FIMD sysmmu. + (needed for Exynos5420 and newer versions) + Add the required FIMD sysmmu nodes to be + disabled with compatible string + "samsung,sysmmu-v3.3", with a "reg" property + holding the register address of FIMD sysmmu. Example: SOC specific part: diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index a079b1e..02a1130 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -306,8 +306,8 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { }; #if defined CONFIG_KEYSTONE_RBL_NAND -#if defined(CONFIG_SYS_NAND_PAGE_2K) static struct nand_ecclayout nand_keystone_rbl_4bit_layout_oobfirst = { +#if defined(CONFIG_SYS_NAND_PAGE_2K) .eccbytes = 40, .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 1acf06b..db1599e 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -27,10 +27,22 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2, 0x97, 0x79, 0xe5, 0x24, 0xb5}; #endif -static uint8_t cs; +static uint8_t cs_next; static __maybe_unused struct nand_ecclayout omap_ecclayout; /* + * Driver configurations + */ +struct omap_nand_info { + struct bch_control *control; + enum omap_ecc ecc_scheme; + int cs; +}; + +/* We are wasting a bit of memory but al least we are safe */ +static struct omap_nand_info omap_nand_info[GPMC_MAX_CS]; + +/* * omap_nand_hwcontrol - Set the address pointers corretly for the * following address/data/command operation */ @@ -38,6 +50,8 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, uint32_t ctrl) { register struct nand_chip *this = mtd->priv; + struct omap_nand_info *info = this->priv; + int cs = info->cs; /* * Point the IO_ADDR to DATA and ADDRESS registers instead @@ -148,24 +162,6 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat, } /* - * Driver configurations - */ -struct omap_nand_info { - struct bch_control *control; - enum omap_ecc ecc_scheme; -}; - -/* - * This can be a single instance cause all current users have only one NAND - * with nearly the same setup (BCH8, some with ELM and others with sw BCH - * library). - * When some users with other BCH strength will exists this have to change! - */ -static __maybe_unused struct omap_nand_info omap_nand_info = { - .control = NULL -}; - -/* * omap_reverse_list - re-orders list elements in reverse order [internal] * @list: pointer to start of list * @length: length of list @@ -198,6 +194,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) unsigned int eccsize1 = 0x00, eccsize0 = 0x00, bch_wrapmode = 0x00; u32 ecc_size_config_val = 0; u32 ecc_config_val = 0; + int cs = info->cs; /* configure GPMC for specific ecc-scheme */ switch (info->ecc_scheme) { @@ -478,11 +475,11 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, oob += eccbytes) { chip->ecc.hwctl(mtd, NAND_ECC_READ); /* read data */ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1); chip->read_buf(mtd, p, eccsize); /* read respective ecc from oob area */ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); chip->read_buf(mtd, oob, eccbytes); /* read syndrome */ chip->ecc.calculate(mtd, p, &ecc_calc[i]); @@ -826,7 +823,7 @@ int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) int board_nand_init(struct nand_chip *nand) { int32_t gpmc_config = 0; - cs = 0; + int cs = cs_next++; int err = 0; /* * xloader/Uboot's gpmc configuration would have configured GPMC for @@ -856,7 +853,9 @@ int board_nand_init(struct nand_chip *nand) nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat; nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd; - nand->priv = &omap_nand_info; + omap_nand_info[cs].control = NULL; + omap_nand_info[cs].cs = cs; + nand->priv = &omap_nand_info[cs]; nand->cmd_ctrl = omap_nand_hwcontrol; nand->options |= NAND_NO_PADDING | NAND_CACHEPRG; nand->chip_delay = 100; @@ -890,6 +889,5 @@ int board_nand_init(struct nand_chip *nand) nand->read_buf = nand_read_buf; nand->dev_ready = omap_spl_dev_ready; #endif - return 0; } diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index f95c928..d22b722 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -290,13 +290,12 @@ int mac_sl_reset(u32 port) return GMACSL_RET_INVALID_PORT; /* Set the soft reset bit */ - DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + - CPGMACSL_REG_RESET, CPGMAC_REG_RESET_VAL_RESET); + writel(CPGMAC_REG_RESET_VAL_RESET, + DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET); /* Wait for the bit to clear */ for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) { - v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) + - CPGMACSL_REG_RESET); + v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET); if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) != CPGMAC_REG_RESET_VAL_RESET) return GMACSL_RET_OK; @@ -321,8 +320,7 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) /* Must wait if the device is undergoing reset */ for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) { - v = DEVICE_REG32_R(DEVICE_EMACSL_BASE(port) + - CPGMACSL_REG_RESET); + v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET); if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) != CPGMAC_REG_RESET_VAL_RESET) break; @@ -331,11 +329,8 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) if (i == DEVICE_EMACSL_RESET_POLL_COUNT) return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE; - DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN, - cfg->max_rx_len); - - DEVICE_REG32_W(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL, - cfg->ctl); + writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); + writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); return ret; } @@ -345,24 +340,24 @@ int ethss_config(u32 ctl, u32 max_pkt_size) u32 i; /* Max length register */ - DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_MAXLEN, max_pkt_size); + writel(max_pkt_size, DEVICE_CPSW_BASE + CPSW_REG_MAXLEN); /* Control register */ - DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_CTL, ctl); + writel(ctl, DEVICE_CPSW_BASE + CPSW_REG_CTL); /* All statistics enabled by default */ - DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN, - CPSW_REG_VAL_STAT_ENABLE_ALL); + writel(CPSW_REG_VAL_STAT_ENABLE_ALL, + DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN); /* Reset and enable the ALE */ - DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL, - CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE | - CPSW_REG_VAL_ALE_CTL_BYPASS); + writel(CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE | + CPSW_REG_VAL_ALE_CTL_BYPASS, + DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL); /* All ports put into forward mode */ for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++) - DEVICE_REG32_W(DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i), - CPSW_REG_VAL_PORTCTL_FORWARD_MODE); + writel(CPSW_REG_VAL_PORTCTL_FORWARD_MODE, + DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i)); return 0; } diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 93a91c3..248aa35 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -42,3 +42,4 @@ obj-$(CONFIG_VIDEO_TEGRA) += tegra.o obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o obj-$(CONFIG_FORMIKE) += formike.o obj-$(CONFIG_AM335X_LCD) += am335x-fb.o +obj-$(CONFIG_VIDEO_PARADE) += parade.o diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index e1e0d80..180a3b4 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -27,17 +27,13 @@ DECLARE_GLOBAL_DATA_PTR; static unsigned int panel_width, panel_height; -/* - * board_init_f(arch/arm/lib/board.c) calls lcd_setmem() which needs - * panel_info.vl_col, panel_info.vl_row and panel_info.vl_bpix to reserve - * FB memory at a very early stage, i.e even before exynos_fimd_parse_dt() - * is called. So, we are forced to statically assign it. - */ #ifdef CONFIG_OF_CONTROL vidinfo_t panel_info = { - .vl_col = LCD_XRES, - .vl_row = LCD_YRES, - .vl_bpix = LCD_COLOR16, + /* + * Insert a value here so that we don't end up in the BSS + * Reference: drivers/video/tegra.c + */ + .vl_col = -1, }; #endif @@ -141,7 +137,7 @@ static void lcd_panel_on(vidinfo_t *vid) } #ifdef CONFIG_OF_CONTROL -int exynos_fimd_parse_dt(const void *blob) +int exynos_lcd_early_init(const void *blob) { unsigned int node; node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_FIMD); @@ -286,8 +282,6 @@ void lcd_ctrl_init(void *lcdbase) set_lcd_clk(); #ifdef CONFIG_OF_CONTROL - if (exynos_fimd_parse_dt(gd->fdt_blob)) - debug("Can't get proper panel info\n"); #ifdef CONFIG_EXYNOS_MIPI_DSIM exynos_init_dsim_platform_data(&panel_info); #endif diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c index cebbba7..f67fa81 100644 --- a/drivers/video/exynos_fimd.c +++ b/drivers/video/exynos_fimd.c @@ -251,6 +251,45 @@ void exynos_fimd_window_off(unsigned int win_id) writel(cfg, &fimd_ctrl->winshmap); } +#ifdef CONFIG_OF_CONTROL +/* +* The reset value for FIMD SYSMMU register MMU_CTRL is 3 +* on Exynos5420 and newer versions. +* This means FIMD SYSMMU is on by default on Exynos5420 +* and newer versions. +* Since in u-boot we don't use SYSMMU, we should disable +* those FIMD SYSMMU. +* Note that there are 2 SYSMMU for FIMD: m0 and m1. +* m0 handles windows 0 and 4, and m1 handles windows 1, 2 and 3. +* We disable both of them here. +*/ +void exynos_fimd_disable_sysmmu(void) +{ + u32 *sysmmufimd; + unsigned int node; + int node_list[2]; + int count; + int i; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "fimd", + COMPAT_SAMSUNG_EXYNOS_SYSMMU, node_list, 2); + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) { + debug("Can't get device node for fimd sysmmu\n"); + return; + } + + sysmmufimd = (u32 *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); + if (!sysmmufimd) { + debug("Can't get base address for sysmmu fimdm0"); + return; + } + + writel(0x0, sysmmufimd); + } +} +#endif void exynos_fimd_lcd_init(vidinfo_t *vid) { @@ -268,6 +307,10 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) node, "reg"); if (fimd_ctrl == NULL) debug("Can't get the FIMD base address\n"); + + if (fdtdec_get_bool(gd->fdt_blob, node, "samsung,disable-sysmmu")) + exynos_fimd_disable_sysmmu(); + #else fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd(); #endif diff --git a/drivers/video/parade.c b/drivers/video/parade.c new file mode 100644 index 0000000..0f543f6 --- /dev/null +++ b/drivers/video/parade.c @@ -0,0 +1,220 @@ +/* + * Copyright (c) 2014 The Chromium OS Authors. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This file is a driver for Parade dP<->LVDS bridges. The original submission + * is for the ps8625 chip. + */ +#include <config.h> +#include <common.h> +#include <i2c.h> +#include <fdtdec.h> + +/* + * Initialization of the chip is a process of writing certaing values into + * certain registers over i2c bus. The chip in fact responds to a range of + * addresses on the i2c bus, so for each written value three parameters are + * required: i2c address, register address and the actual value. + * + * The base address is derived from the device tree, only address offset is + * stored in the table below. + */ +/** + * struct reg_data() - data for a parade register write + * + * @addr_off offset from the i2c base address for parade + * @reg_addr register address to write + * @value value to be written + */ +struct reg_data { + uint8_t addr_off; + uint8_t reg; + uint8_t value; +} _packed; + +#define END_OF_TABLE 0xff /* Ficticious offset */ + +static const struct reg_data parade_values[] = { + {0x02, 0xa1, 0x01}, /* HPD low */ + /* + * SW setting + * [1:0] SW output 1.2V voltage is lower to 96% + */ + {0x04, 0x14, 0x01}, + /* + * RCO SS setting + * [5:4] = b01 0.5%, b10 1%, b11 1.5% + */ + {0x04, 0xe3, 0x20}, + {0x04, 0xe2, 0x80}, /* [7] RCO SS enable */ + /* + * RPHY Setting + * [3:2] CDR tune wait cycle before + * measure for fine tune b00: 1us, + * 01: 0.5us, 10:2us, 11:4us. + */ + {0x04, 0x8a, 0x0c}, + {0x04, 0x89, 0x08}, /* [3] RFD always on */ + /* + * CTN lock in/out: + * 20000ppm/80000ppm. Lock out 2 + * times. + */ + {0x04, 0x71, 0x2d}, + /* + * 2.7G CDR settings + * NOF=40LSB for HBR CDR setting + */ + {0x04, 0x7d, 0x07}, + {0x04, 0x7b, 0x00}, /* [1:0] Fmin=+4bands */ + {0x04, 0x7a, 0xfd}, /* [7:5] DCO_FTRNG=+-40% */ + /* + * 1.62G CDR settings + * [5:2]NOF=64LSB [1:0]DCO scale is 2/5 + */ + {0x04, 0xc0, 0x12}, + {0x04, 0xc1, 0x92}, /* Gitune=-37% */ + {0x04, 0xc2, 0x1c}, /* Fbstep=100% */ + {0x04, 0x32, 0x80}, /* [7] LOS signal disable */ + /* + * RPIO Setting + * [7:4] LVDS driver bias current : + * 75% (250mV swing) + */ + {0x04, 0x00, 0xb0}, + /* + * [7:6] Right-bar GPIO output strength is 8mA + */ + {0x04, 0x15, 0x40}, + /* EQ Training State Machine Setting */ + {0x04, 0x54, 0x10}, /* RCO calibration start */ + /* [4:0] MAX_LANE_COUNT set to one lane */ + {0x01, 0x02, 0x81}, + /* [4:0] LANE_COUNT_SET set to one lane */ + {0x01, 0x21, 0x81}, + {0x00, 0x52, 0x20}, + {0x00, 0xf1, 0x03}, /* HPD CP toggle enable */ + {0x00, 0x62, 0x41}, + /* Counter number, add 1ms counter delay */ + {0x00, 0xf6, 0x01}, + /* + * [6]PWM function control by + * DPCD0040f[7], default is PWM + * block always works. + */ + {0x00, 0x77, 0x06}, + /* + * 04h Adjust VTotal tolerance to + * fix the 30Hz no display issue + */ + {0x00, 0x4c, 0x04}, + /* DPCD00400='h00, Parade OUI = 'h001cf8 */ + {0x01, 0xc0, 0x00}, + {0x01, 0xc1, 0x1c}, /* DPCD00401='h1c */ + {0x01, 0xc2, 0xf8}, /* DPCD00402='hf8 */ + /* + * DPCD403~408 = ASCII code + * D2SLV5='h4432534c5635 + */ + {0x01, 0xc3, 0x44}, + {0x01, 0xc4, 0x32}, /* DPCD404 */ + {0x01, 0xc5, 0x53}, /* DPCD405 */ + {0x01, 0xc6, 0x4c}, /* DPCD406 */ + {0x01, 0xc7, 0x56}, /* DPCD407 */ + {0x01, 0xc8, 0x35}, /* DPCD408 */ + /* + * DPCD40A, Initial Code major revision + * '01' + */ + {0x01, 0xca, 0x01}, + /* DPCD40B, Initial Code minor revision '05' */ + {0x01, 0xcb, 0x05}, + /* DPCD720, Select internal PWM */ + {0x01, 0xa5, 0xa0}, + /* + * FFh for 100% PWM of brightness, 0h for 0% + * brightness + */ + {0x01, 0xa7, 0xff}, + /* + * Set LVDS output as 6bit-VESA mapping, + * single LVDS channel + */ + {0x01, 0xcc, 0x13}, + /* Enable SSC set by register */ + {0x02, 0xb1, 0x20}, + /* + * Set SSC enabled and +/-1% central + * spreading + */ + {0x04, 0x10, 0x16}, + /* MPU Clock source: LC => RCO */ + {0x04, 0x59, 0x60}, + {0x04, 0x54, 0x14}, /* LC -> RCO */ + {0x02, 0xa1, 0x91}, /* HPD high */ + {END_OF_TABLE} +}; + +/** + * Write values table into the Parade eDP bridge + * + * @return 0 on success, non-0 on failure + */ + +static int parade_write_regs(int base_addr, const struct reg_data *table) +{ + int ret = 0; + + while (!ret && (table->addr_off != END_OF_TABLE)) { + ret = i2c_write(base_addr + table->addr_off, + table->reg, 1, + (uint8_t *)&table->value, + sizeof(table->value)); + table++; + } + return ret; +} + +int parade_init(const void *blob) +{ + int bus, old_bus; + int parent; + int node; + int addr; + int ret; + + node = fdtdec_next_compatible(blob, 0, COMPAT_PARADE_PS8625); + if (node < 0) + return 0; + + parent = fdt_parent_offset(blob, node); + if (parent < 0) { + debug("%s: Could not find parent i2c node\n", __func__); + return -1; + } + addr = fdtdec_get_int(blob, node, "reg", -1); + if (addr < 0) { + debug("%s: Could not find i2c address\n", __func__); + return -1; + } + + bus = i2c_get_bus_num_fdt(parent); + old_bus = i2c_get_bus_num(); + + debug("%s: Using i2c bus %d\n", __func__, bus); + + /* + * TODO(sjg@chromium.org): Hmmm we seem to need some sort of delay + * here. + */ + mdelay(40); + i2c_set_bus_num(bus); + ret = parade_write_regs(addr, parade_values); + + i2c_set_bus_num(old_bus); + + return ret; +} diff --git a/include/common.h b/include/common.h index c7e51ca..97c04df 100644 --- a/include/common.h +++ b/include/common.h @@ -616,6 +616,7 @@ int checkicache (void); int checkdcache (void); void upmconfig (unsigned int, unsigned int *, unsigned int); ulong get_tbclk (void); +void reset_misc (void); void reset_cpu (ulong addr); #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) void ft_cpu_setup(void *blob, bd_t *bd); diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index dcded0a..a14310a 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -14,11 +14,8 @@ #ifndef __CONFIG_IGEP0033_H #define __CONFIG_IGEP0033_H -#define CONFIG_AM33XX -#define CONFIG_OMAP -#define CONFIG_OMAP_COMMON - -#include <asm/arch/omap.h> +#define CONFIG_NAND +#include <configs/ti_am335x_common.h> /* Mach type */ #define MACH_TYPE_IGEP0033 4521 /* Until the next sync */ @@ -29,166 +26,81 @@ #define V_SCLK (V_OSCK) #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "U-Boot# " -#define CONFIG_SYS_NO_FLASH - -/* Display cpuinfo */ -#define CONFIG_DISPLAY_CPUINFO - -/* Flattened Device Tree */ -#define CONFIG_OF_LIBFDT - -/* Commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS /* Make the verbose messages from UBI stop printing */ #define CONFIG_UBI_SILENCE_MSG #define CONFIG_UBIFS_SILENCE_MSG -#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80F80000\0" \ - "dtbaddr=0x80200000\0" \ + DEFAULT_LINUX_BOOT_ENV \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ "dtbfile=am335x-base0033.dtb\0" \ "console=ttyO0,115200n8\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "ubiroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \ "mmcrootfstype=ext4 rootwait\0" \ - "ubirootfstype=ubifs rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ - "ubiargs=setenv bootargs console=${console} " \ - "root=${ubiroot} " \ - "rootfstype=${ubirootfstype}\0" \ - "bootenv=uEnv.txt\0" \ + "bootenv=uEnv.txt\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ - "load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \ - "ubiload=ubi part filesystem 2048; ubifsmount ubi0; " \ + "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \ + "mmcboot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmcload; then " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr};" \ + "fi;" \ + "fi;\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \ + "nandrootfstype=ubifs rootwait\0" \ + "nandload=ubi part filesystem 2048; ubifsmount ubi0; " \ "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \ - "ubifsload ${dtbaddr} ${bootdir}/${dtbfile} \0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ - "ubiboot=echo Booting from nand (ubifs) ...; " \ - "run ubiargs; run ubiload; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ + "ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype} \0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "run nandload; " \ + "bootz ${loadaddr} - ${fdtaddr} \0" +#endif #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmcload; then " \ - "run mmcboot;" \ - "fi;" \ - "else " \ - "run ubiboot;" \ - "fi;" \ - -/* Max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) -/* Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ + "run mmcboot;" \ + "run nandboot;" /* NS16550 Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ - #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* MMC support */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* GPIO support */ -#define CONFIG_OMAP_GPIO - /* Ethernet support */ -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI #define CONFIG_PHYLIB #define CONFIG_PHY_SMSC /* NAND support */ -#define CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM -#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION 1 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_REDUNDAND_ENVIRONMENT @@ -210,40 +122,11 @@ /* Unsupported features */ #undef CONFIG_USE_IRQ -/* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -/* - * Place the image at the start of the ROM defined image space. - * We limit our size to the ROM-defined downloaded image area, and use the - * rest of the space for stack. - */ -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT +/* SPL */ +#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_AM33XX_BCH -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) @@ -267,22 +150,4 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80800000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - #endif /* ! __CONFIG_IGEP0033_H */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 74e72a5..c24984b 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -61,8 +61,6 @@ #ifdef CONFIG_LCD #define CONFIG_EXYNOS_FB #define CONFIG_EXYNOS_DP -#define LCD_XRES 2560 -#define LCD_YRES 1600 #define LCD_BPP LCD_COLOR16 #endif diff --git a/include/configs/odroid.h b/include/configs/odroid.h new file mode 100644 index 0000000..29dcc4a --- /dev/null +++ b/include/configs/odroid.h @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * Sanghee Kim <sh0130.kim@samsung.com> + * Piotr Wilczek <p.wilczek@samsung.com> + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * Configuation settings for the Odroid-U3 (EXYNOS4412) board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ODROID_U3_H +#define __CONFIG_ODROID_U3_H + +#include <configs/exynos4-dt.h> + +#define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */ + +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-odroid + +#define CONFIG_SYS_L2CACHE_OFF +#ifndef CONFIG_SYS_L2CACHE_OFF +#define CONFIG_SYS_L2_PL310 +#define CONFIG_SYS_PL310_BASE 0x10502000 +#endif + +#define CONFIG_MACH_TYPE 4289 + +#define CONFIG_NR_DRAM_BANKS 8 +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) +#define CONFIG_SYS_TEXT_BASE 0x43e00000 + +#include <linux/sizes.h> +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) + +/* select serial console configuration */ +#define CONFIG_SERIAL1 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_CMD_BOOTZ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE +#define CONFIG_BOOTARGS "Please use defined boot" +#define CONFIG_BOOTCOMMAND "run autoboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ + - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MEM_TOP_HIDE (SZ_1M) /* ram console */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */ +#define CONFIG_ENV_OVERWRITE + +/* Partitions name */ +#define PARTS_BOOT "boot" +#define PARTS_ROOT "platform" + +#define CONFIG_DFU_ALT \ + "uImage fat 0 1;" \ + "zImage fat 0 1;" \ + "Image.itb fat 0 1;" \ + "uInitrd fat 0 1;" \ + "exynos4412-odroidu3.dtb fat 0 1;" \ + "exynos4412-odroidx2.dtb fat 0 1;" \ + ""PARTS_BOOT" part 0 1;" \ + ""PARTS_ROOT" part 0 2\0" \ + +#define CONFIG_SET_DFU_ALT_INFO +#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) + +#define CONFIG_DFU_ALT_BOOT_EMMC \ + "u-boot raw 0x3e 0x800 mmcpart 1;" \ + "bl1 raw 0x0 0x1e mmcpart 1;" \ + "bl2 raw 0x1e 0x1d mmcpart 1;" \ + "tzsw raw 0x83e 0x138 mmcpart 1\0" + +#define CONFIG_DFU_ALT_BOOT_SD \ + "u-boot raw 0x3f 0x800;" \ + "bl1 raw 0x1 0x1e;" \ + "bl2 raw 0x1f 0x1d;" \ + "tzsw raw 0x83f 0x138\0" + +/* + * Bootable media layout: + * dev: SD eMMC(part boot) + * BL1 1 0 + * BL2 31 30 + * UBOOT 63 62 + * TZSW 2111 2110 + * ENV 2560 2560(part user) + * + * MBR Primary partiions: + * Num Name Size Offset + * 1. BOOT: 100MiB 2MiB + * 2. ROOT: - +*/ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \ + "${kernelname}\0" \ + "loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \ + "${initrdname}\0" \ + "loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \ + "${fdtfile}\0" \ + "check_ramdisk=" \ + "if run loadinitrd; then " \ + "setenv initrd_addr ${initrdaddr};" \ + "else " \ + "setenv initrd_addr -;" \ + "fi;\0" \ + "check_dtb=" \ + "if run loaddtb; then " \ + "setenv fdt_addr ${fdtaddr};" \ + "else " \ + "setenv fdt_addr;" \ + "fi;\0" \ + "kernel_args=" \ + "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \ + " rootwait ${console} ${opts}\0" \ + "boot_fit=" \ + "setenv kerneladdr 0x42000000;" \ + "setenv kernelname Image.itb;" \ + "run loadkernel;" \ + "run kernel_args;" \ + "bootm ${kerneladdr}#${boardname}\0" \ + "boot_uimg=" \ + "setenv kerneladdr 0x40007FC0;" \ + "setenv kernelname uImage;" \ + "run check_dtb;" \ + "run check_ramdisk;" \ + "run loadkernel;" \ + "run kernel_args;" \ + "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \ + "boot_zimg=" \ + "setenv kerneladdr 0x40007FC0;" \ + "setenv kernelname zImage;" \ + "run check_dtb;" \ + "run check_ramdisk;" \ + "run loadkernel;" \ + "run kernel_args;" \ + "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \ + "autoboot=" \ + "if test -e mmc 0 Image.itb; then; " \ + "run boot_fit;" \ + "elif test -e mmc 0 zImage; then; " \ + "run boot_zimg;" \ + "elif test -e mmc 0 uImage; then; " \ + "run boot_uimg;" \ + "fi;\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "mmcbootdev=0\0" \ + "mmcbootpart=1\0" \ + "mmcrootdev=0\0" \ + "mmcrootpart=2\0" \ + "bootdelay=0\0" \ + "dfu_alt_system="CONFIG_DFU_ALT \ + "dfu_alt_info=Please reset the board\0" \ + "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \ + "consoleoff=set console console=ram; save; reset\0" \ + "initrdname=uInitrd\0" \ + "initrdaddr=42000000\0" \ + "fdtaddr=40800000\0" + +/* I2C */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_S3C24X0 +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 +#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 +#define CONFIG_MAX_I2C_NUM 8 +#define CONFIG_SYS_I2C_INIT_BOARD + +/* POWER */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX77686 + +/* GPT */ +#define CONFIG_RANDOM_UUID + +/* Security subsystem - enable hw_rand() */ +#define CONFIG_EXYNOS_ACE_SHA +#define CONFIG_LIB_HW_RAND + +#define CONFIG_CMD_GPIO + +/* + * Supported Odroid boards: X3, U3 + * TODO: Add Odroid X support + */ +#define CONFIG_MISC_COMMON +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_BOARD_TYPES +#define CONFIG_MISC_INIT_R + +#undef CONFIG_REVISION_TAG + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 644e97f..f25a940 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -207,6 +207,9 @@ "rootfstype=${ramrootfstype}\0" \ "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ @@ -243,9 +246,13 @@ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ - "if run loadimage; then " \ - "run mmcboot;" \ - "fi;" \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi; " \ "fi;" \ "run nandboot;" \ "setenv bootfile zImage;" \ diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 76b8d7a..88c093f 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -22,4 +22,14 @@ #define CONFIG_SYS_PROMPT "Peach # " #define CONFIG_IDENT_STRING " for Peach" +#define CONFIG_VIDEO_PARADE + +/* Display */ +#define CONFIG_LCD +#ifdef CONFIG_LCD +#define CONFIG_EXYNOS_FB +#define CONFIG_EXYNOS_DP +#define LCD_BPP LCD_COLOR16 +#endif + #endif /* __CONFIG_PEACH_PIT_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index eb046cd..20985da 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -247,7 +247,4 @@ int universal_spi_read(void); #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) -#define LCD_XRES 480 -#define LCD_YRES 800 - #endif /* __CONFIG_H */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 7db1db6..6fa646b 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -261,7 +261,4 @@ #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) -#define LCD_XRES 720 -#define LCD_YRES 1280 - #endif /* __CONFIG_H */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index f537e4f..1450865 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -241,7 +241,4 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) -#define LCD_XRES 720 -#define LCD_YRES 1280 - #endif /* __CONFIG_H */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 856e6cf..5f88938 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -94,6 +94,8 @@ enum fdt_compat_id { COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */ COMPAT_TI_TPS65090, /* Texas Instrument TPS65090 */ COMPAT_NXP_PTN3460, /* NXP PTN3460 DP/LVDS bridge */ + COMPAT_SAMSUNG_EXYNOS_SYSMMU, /* Exynos sysmmu */ + COMPAT_PARADE_PS8625, /* Parade PS8622 EDP->LVDS bridge */ COMPAT_COUNT, }; diff --git a/include/samsung/misc.h b/include/samsung/misc.h index 10653a1..607e8d4 100644 --- a/include/samsung/misc.h +++ b/include/samsung/misc.h @@ -28,4 +28,14 @@ void check_boot_mode(void); void draw_logo(void); #endif +#ifdef CONFIG_SET_DFU_ALT_INFO +char *get_dfu_alt_system(void); +char *get_dfu_alt_boot(void); +void set_dfu_alt_info(void); +#endif +#ifdef CONFIG_BOARD_TYPES +void set_board_type(void); +const char *get_board_type(void); +#endif + #endif /* __SAMSUNG_MISC_COMMON_H__ */ diff --git a/lib/fdtdec.c b/lib/fdtdec.c index eb5aa20..c2f3645 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -70,6 +70,8 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(SANDBOX_LCD_SDL, "sandbox,lcd-sdl"), COMPAT(TI_TPS65090, "ti,tps65090"), COMPAT(COMPAT_NXP_PTN3460, "nxp,ptn3460"), + COMPAT(SAMSUNG_EXYNOS_SYSMMU, "samsung,sysmmu-v3.3"), + COMPAT(PARADE_PS8625, "parade,ps8625"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id) |