summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG45
-rwxr-xr-xMAKEALL18
-rw-r--r--Makefile35
-rw-r--r--README38
-rw-r--r--board/cds/mpc8541cds/mpc8541cds.c4
-rw-r--r--board/cds/mpc8541cds/u-boot.lds1
-rw-r--r--board/cds/mpc8548cds/Makefile51
-rw-r--r--board/cds/mpc8548cds/config.mk30
-rw-r--r--board/cds/mpc8548cds/init.S255
-rw-r--r--board/cds/mpc8548cds/mpc8548cds.c329
-rw-r--r--board/cds/mpc8548cds/u-boot.lds146
-rw-r--r--board/cds/mpc8555cds/mpc8555cds.c4
-rw-r--r--board/cds/mpc8555cds/u-boot.lds1
-rw-r--r--board/mpc8349ads/Makefile45
-rw-r--r--board/mpc8349ads/config.mk27
-rw-r--r--board/mpc8349ads/mpc8349ads.c276
-rw-r--r--board/mpc8349ads/u-boot.lds119
-rw-r--r--board/mpc8540ads/mpc8540ads.c4
-rw-r--r--board/mpc8540ads/u-boot.lds1
-rw-r--r--board/mpc8540eval/Makefile49
-rw-r--r--board/mpc8540eval/config.mk34
-rw-r--r--board/mpc8540eval/flash.c892
-rw-r--r--board/mpc8540eval/init.S178
-rw-r--r--board/mpc8540eval/mpc8540eval.c251
-rw-r--r--board/mpc8540eval/u-boot.lds152
-rw-r--r--board/mpc8560ads/config.mk1
-rw-r--r--board/mpc8560ads/mpc8560ads.c4
-rw-r--r--board/mpc8560ads/u-boot.lds1
-rw-r--r--board/pm854/u-boot.lds1
-rw-r--r--board/sbc8560/config.mk1
-rw-r--r--board/stxgp3/config.mk1
-rw-r--r--board/stxgp3/u-boot.lds1
-rw-r--r--board/tqm8540/u-boot.lds1
-rw-r--r--board/tqm8560/u-boot.lds1
-rw-r--r--common/cmd_bdinfo.c4
-rw-r--r--common/cmd_bootm.c4
-rw-r--r--config.mk4
-rw-r--r--cpu/mpc8260/config.mk2
-rw-r--r--cpu/mpc83xx/Makefile53
-rw-r--r--cpu/mpc83xx/config.mk26
-rw-r--r--cpu/mpc83xx/cpu.c151
-rw-r--r--cpu/mpc83xx/cpu_init.c163
-rw-r--r--cpu/mpc83xx/i2c.c251
-rw-r--r--cpu/mpc83xx/interrupts.c94
-rw-r--r--cpu/mpc83xx/pci.c252
-rw-r--r--cpu/mpc83xx/resetvec.S6
-rw-r--r--cpu/mpc83xx/spd_sdram.c408
-rw-r--r--cpu/mpc83xx/speed.c421
-rw-r--r--cpu/mpc83xx/start.S1093
-rw-r--r--cpu/mpc83xx/traps.c274
-rw-r--r--cpu/mpc85xx/Makefile2
-rw-r--r--cpu/mpc85xx/commproc.c4
-rw-r--r--cpu/mpc85xx/cpu.c21
-rw-r--r--cpu/mpc85xx/cpu_init.c53
-rw-r--r--cpu/mpc85xx/ether_fcc.c4
-rw-r--r--cpu/mpc85xx/serial_scc.c4
-rw-r--r--cpu/mpc85xx/spd_sdram.c1096
-rw-r--r--cpu/mpc85xx/speed.c4
-rw-r--r--cpu/mpc85xx/start.S14
-rw-r--r--doc/README.mpc83xxads96
-rw-r--r--doc/README.mpc85xxads10
-rw-r--r--doc/README.mpc85xxcds43
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/tsec.c (renamed from cpu/mpc85xx/tsec.c)67
-rw-r--r--drivers/tsec.h (renamed from cpu/mpc85xx/tsec.h)25
-rw-r--r--include/asm-ppc/e300.h128
-rw-r--r--include/asm-ppc/global_data.h21
-rw-r--r--include/asm-ppc/i2c.h103
-rw-r--r--include/asm-ppc/immap_83xx.h1060
-rw-r--r--include/asm-ppc/immap_85xx.h104
-rw-r--r--include/asm-ppc/mpc8349_pci.h167
-rw-r--r--include/asm-ppc/processor.h15
-rw-r--r--include/asm-ppc/u-boot.h5
-rw-r--r--include/common.h9
-rw-r--r--include/configs/CPU86.h1
-rw-r--r--include/configs/CPU87.h1
-rw-r--r--include/configs/IDS8247.h1
-rw-r--r--include/configs/IPHASE4539.h2
-rw-r--r--include/configs/ISPAN.h1
-rw-r--r--include/configs/MPC8260ADS.h2
-rw-r--r--include/configs/MPC8266ADS.h1
-rw-r--r--include/configs/MPC8349ADS.h584
-rw-r--r--include/configs/MPC8540ADS.h17
-rw-r--r--include/configs/MPC8540EVAL.h347
-rw-r--r--include/configs/MPC8541CDS.h65
-rw-r--r--include/configs/MPC8548CDS.h521
-rw-r--r--include/configs/MPC8555CDS.h65
-rw-r--r--include/configs/MPC8560ADS.h12
-rw-r--r--include/configs/PM826.h1
-rw-r--r--include/configs/PM828.h1
-rw-r--r--include/configs/PM854.h10
-rw-r--r--include/configs/RPXsuper.h1
-rw-r--r--include/configs/Rattler.h2
-rw-r--r--include/configs/SBC8540.h14
-rw-r--r--include/configs/SBC8560.h14
-rw-r--r--include/configs/SCM.h1
-rw-r--r--include/configs/TQM8260.h2
-rw-r--r--include/configs/TQM8540.h6
-rw-r--r--include/configs/TQM8560.h3
-rw-r--r--include/configs/ZPC1900.h1
-rw-r--r--include/configs/atc.h1
-rw-r--r--include/configs/cogent_mpc8260.h1
-rw-r--r--include/configs/ep8260.h2
-rw-r--r--include/configs/gw8260.h1
-rw-r--r--include/configs/hymod.h1
-rw-r--r--include/configs/ppmc8260.h1
-rw-r--r--include/configs/rsdproto.h1
-rw-r--r--include/configs/sacsng.h1
-rw-r--r--include/configs/sbc8260.h1
-rw-r--r--include/configs/sbc8560.h14
-rw-r--r--include/configs/stxgp3.h6
-rw-r--r--include/ioports.h2
-rw-r--r--include/mpc83xx.h288
-rw-r--r--include/net.h2
-rw-r--r--include/spd.h124
-rw-r--r--lib_ppc/board.c18
-rw-r--r--net/eth.c23
117 files changed, 10939 insertions, 484 deletions
diff --git a/CHANGELOG b/CHANGELOG
index d98b56f..f1484ee 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,51 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Patch by Jon Loeliger
+ Fix style issues primarily in 85xx and 83xx boards.
+ - C++ comments
+ - Trailing white space
+ - Indentation not by TAB
+ - Excessive amount of empty lines
+ - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+ Add Xianghua Xiao and Lunsheng Wang's support for the
+ GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+ Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+ Move the TSEC driver out of cpu/mpc85xx as it will be shared
+ by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+ Implemented support for MPC8548CDS board.
+ Added DDR II support based on SPD values for MPC85xx boards.
+ This roll-up patch also includes bugfies for the previously
+ published patches:
+ DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+ Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+ For MPC85xxCDS:
+ Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+ for faster flash parts.
+ Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+ Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+ - Convert the CPM2 based functionality to use new CONFIG_CPM2
+ option rather than a myriad of CONFIG_MPC8560-like variants.
+ Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+ Eliminates the CONFIG_MPC8560 option entirely. Distributes the
+ new CONFIG_CPM2 option to each 8260 board.
+
* Add support for MicroSys PM856 board
Patch by Josef Wagner, 03 Aug 2005
diff --git a/MAKEALL b/MAKEALL
index f934091..2d0c096 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -108,13 +108,22 @@ LIST_8260=" \
"
#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx=" \
+ MPC8349ADS \
+"
+
+
+#########################################################################
## MPC85xx Systems (includes 8540, 8560 etc.)
#########################################################################
LIST_85xx=" \
- MPC8540ADS MPC8541CDS MPC8555CDS MPC8560ADS \
- PM854 PM856 sbc8540 sbc8560 \
- stxgp3 TQM8540 \
+ MPC8540ADS MPC8540EVAL MPC8541CDS MPC8548CDS \
+ MPC8555CDS MPC8560ADS PM854 PM856 \
+ sbc8540 sbc8560 stxgp3 TQM8540 \
"
#########################################################################
@@ -133,6 +142,7 @@ LIST_7xx=" \
LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
${LIST_8xx} \
${LIST_8220} ${LIST_824x} ${LIST_8260} \
+ ${LIST_83xx} \
${LIST_85xx} \
${LIST_4xx} \
${LIST_74xx} ${LIST_7xx}"
@@ -250,7 +260,7 @@ build_target() {
for arg in $@
do
case "$arg" in
- ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \
+ ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
microblaze| \
mips| \
diff --git a/Makefile b/Makefile
index a372fe9..8fb600d 100644
--- a/Makefile
+++ b/Makefile
@@ -54,7 +54,7 @@ ifeq ($(HOSTARCH),ppc)
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
@@ -97,6 +97,9 @@ endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
@@ -1193,18 +1196,48 @@ TASREG_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
+#########################################################################
## MPC85xx Systems
#########################################################################
MPC8540ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config: unconfig
+ @echo "" >include/config.h ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ echo -n "... 33 MHz PCI" ; \
+ else \
+ echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+ echo -n "... 66 MHz PCI" ; \
+ fi ; \
+ if [ "$(findstring _slave_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+ echo " slave" ; \
+ else \
+ echo " host" ; \
+ fi
+ @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
MPC8560ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
MPC8541CDS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+MPC8548CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
MPC8555CDS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
diff --git a/README b/README
index 6327f64..9283c5e 100644
--- a/README
+++ b/README
@@ -287,17 +287,17 @@ The following options need to be configured:
CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T
CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L
CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260
- CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L
- CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L
- CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L
- CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech
- CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245
- CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37
- CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC
- CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG
- CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT
- CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900
- CONFIG_FPS860L CONFIG_ZUMA
+ CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM850L
+ CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM855L
+ CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TQM860L
+ CONFIG_ETX094 CONFIG_MVS1 CONFIG_TTTech
+ CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_UTX8245
+ CONFIG_FADS823 CONFIG_NETTA CONFIG_V37
+ CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMC
+ CONFIG_FADS860T CONFIG_NX823 CONFIG_W7OLMG
+ CONFIG_FLAGADM CONFIG_OCRTC CONFIG_WALNUT
+ CONFIG_FPS850L CONFIG_ORSG CONFIG_ZPC1900
+ CONFIG_FPS860L CONFIG_OXC CONFIG_ZUMA
ARM based boards:
-----------------
@@ -2186,14 +2186,14 @@ configurations; the following names are supported:
DUET_ADS_config MBX_config sbc8560_66_config
EBONY_config MPC8260ADS_config SM850_config
ELPT860_config MPC8540ADS_config SPD823TS_config
- ESTEEM192E_config MPC8560ADS_config stxgp3_config
- ETX094_config NETVIA_config SXNI855T_config
- FADS823_config omap1510inn_config TQM823L_config
- FADS850SAR_config omap1610h2_config TQM850L_config
- FADS860T_config omap1610inn_config TQM855L_config
- FPS850L_config omap5912osk_config TQM860L_config
- omap2420h4_config walnut_config
- Yukon8220_config
+ ESTEEM192E_config MPC8540EVAL_config stxgp3_config
+ ETX094_config MPC8560ADS_config SXNI855T_config
+ FADS823_config NETVIA_config TQM823L_config
+ FADS850SAR_config omap1510inn_config TQM850L_config
+ FADS860T_config omap1610h2_config TQM855L_config
+ FPS850L_config omap1610inn_config TQM860L_config
+ omap5912osk_config walnut_config
+ omap2420h4_config Yukon8220_config
ZPC1900_config
Note: for some board special configuration names may exist; check if
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
index c75a4df..6b8aa68 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/cds/mpc8541cds/mpc8541cds.c
@@ -32,7 +32,7 @@
#include "../common/cadmus.h"
#include "../common/eeprom.h"
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -271,7 +271,7 @@ initdram(int board_type)
#endif
dram_size = spd_sdram();
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
diff --git a/board/cds/mpc8541cds/u-boot.lds b/board/cds/mpc8541cds/u-boot.lds
index f8cee53..bd697d8 100644
--- a/board/cds/mpc8541cds/u-boot.lds
+++ b/board/cds/mpc8541cds/u-boot.lds
@@ -69,7 +69,6 @@ SECTIONS
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
new file mode 100644
index 0000000..0d4abbd
--- /dev/null
+++ b/board/cds/mpc8548cds/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o \
+ ../common/cadmus.o \
+ ../common/eeprom.o
+
+SOBJS := init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/cds/mpc8548cds/config.mk b/board/cds/mpc8548cds/config.mk
new file mode 100644
index 0000000..242a676
--- /dev/null
+++ b/board/cds/mpc8548cds/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8548cds board
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
new file mode 100644
index 0000000..53dcd0d
--- /dev/null
+++ b/board/cds/mpc8548cds/init.S
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long 13
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+ /*
+ * TLB0 16K Cacheable, non-guarded
+ * 0xd001_0000 16K Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(0, 0, 0)
+ .long TLB1_MAS1(1, 0, 0, 0, 0)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+ 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+ 0,0,0,0,0,1,0,1,0,1)
+
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ .long TLB1_MAS0(1, 0, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ .long TLB1_MAS0(1, 1, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ .long TLB1_MAS0(1, 2, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xa0000000 256M PCI2 MEM First half
+ */
+ .long TLB1_MAS0(1, 3, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xb0000000 256M PCI2 MEM Second half
+ */
+ .long TLB1_MAS0(1, 4, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
+ 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
+ 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ * 0xe300_0000 16M PCI2 IO
+ */
+ .long TLB1_MAS0(1, 5, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ .long TLB1_MAS0(1, 6, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+ /*
+ * TLB 7: 1M Non-cacheable, guarded
+ * 0xf8000000 1M CADMUS registers
+ */
+ .long TLB1_MAS0(1, 7, 0)
+ .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
+
+ entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
+ * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * The defines below are 1-off of the actual LAWAR0 usage.
+ * So LAWAR3 define uses the LAWAR4 register in the ECM.
+ */
+
+#define LAWBAR0 0
+#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+ .section .bootpg, "ax"
+ .globl law_entry
+
+law_entry:
+ entry_start
+ .long 6
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+ .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
+ entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
new file mode 100644
index 0000000..5bc0890
--- /dev/null
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+#include "../common/cadmus.h"
+#include "../common/eeprom.h"
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+ return 0;
+}
+
+int checkboard (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+
+ /* PCI slot in USER bits CSR[6:7] by convention. */
+ uint pci_slot = get_pci_slot ();
+
+ uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
+ uint pci1_32 = gur->pordevsr & 0x10000; /* PORDEVSR[15] */
+ uint pci1_clk_sel = gur->porpllsr & 0x8000; /* PORPLLSR[16] */
+ uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
+
+ uint pci1_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
+
+ uint cpu_board_rev = get_cpu_board_revision ();
+
+ printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
+ get_board_version (), pci_slot);
+
+ printf ("CPU Board Revision %d.%d (0x%04x)\n",
+ MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
+ MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
+
+ printf (" PCI1: %d bit, %s MHz, %s\n",
+ (pci1_32) ? 32 : 64,
+ (pci1_speed == 33000000) ? "33" :
+ (pci1_speed == 66000000) ? "66" : "unknown",
+ pci1_clk_sel ? "sync" : "async");
+
+ if (pci_dual) {
+ printf (" PCI2: 32 bit, 66 MHz, %s\n",
+ pci2_clk_sel ? "sync" : "async");
+ } else {
+ printf (" PCI2: disabled\n");
+ }
+
+ /*
+ * Initialize local bus.
+ */
+ local_bus_init ();
+
+
+ /*
+ * Hack TSEC 3 and 4 IO voltages.
+ */
+ gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */
+
+ return 0;
+}
+
+long int
+initdram(int board_type)
+{
+ long dram_size = 0;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+
+ puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+ {
+ /*
+ * Work around to stabilize DDR DLL MSYNC_IN.
+ * Errata DDR9 seems to have been fixed.
+ * This is now the workaround for Errata DDR11:
+ * Override DLL = 1, Course Adj = 1, Tap Select = 0
+ */
+
+ volatile ccsr_gur_t *gur= &immap->im_gur;
+
+ gur->ddrdllcr = 0x81000000;
+ asm("sync;isync;msync");
+ udelay(200);
+ }
+#endif
+ dram_size = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+ /*
+ * SDRAM Initialization
+ */
+ sdram_init();
+
+ puts(" DDR: ");
+ return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+
+ uint clkdiv;
+ uint lbc_hz;
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ clkdiv = (lbc->lcrr & 0x0f) * 2;
+ lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+ gur->lbiuiplldcr1 = 0x00078080;
+ if (clkdiv == 16) {
+ gur->lbiuiplldcr0 = 0x7c0f1bf0;
+ } else if (clkdiv == 8) {
+ gur->lbiuiplldcr0 = 0x6c0f1bf0;
+ } else if (clkdiv == 4) {
+ gur->lbiuiplldcr0 = 0x5c0f1bf0;
+ }
+
+ lbc->lcrr |= 0x00030000;
+
+ asm("sync;isync;msync");
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+
+ uint idx;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+ uint cpu_board_rev;
+ uint lsdmr_common;
+
+ puts(" SDRAM: ");
+
+ print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+ /*
+ * Setup SDRAM Base and Option Registers
+ */
+ lbc->or2 = CFG_OR2_PRELIM;
+ asm("msync");
+
+ lbc->br2 = CFG_BR2_PRELIM;
+ asm("msync");
+
+ lbc->lbcr = CFG_LBC_LBCR;
+ asm("msync");
+
+
+ lbc->lsrt = CFG_LBC_LSRT;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ asm("msync");
+
+ /*
+ * MPC8548 uses "new" 15-16 style addressing.
+ */
+ cpu_board_rev = get_cpu_board_revision();
+ lsdmr_common = CFG_LBC_LSDMR_COMMON;
+ lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+
+ /*
+ * Issue PRECHARGE ALL command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+
+ /*
+ * Issue 8 AUTO REFRESH commands.
+ */
+ for (idx = 0; idx < 8; idx++) {
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+ }
+
+ /*
+ * Issue 8 MODE-set command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+
+ /*
+ * Issue NORMAL OP command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(200); /* Overkill. Must wait > 200 bus cycles */
+
+#endif /* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CFG_MEMTEST_START,
+ CFG_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_PCI)
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc85xxcds_config_table[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_IDSEL_NUMBER, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ } },
+ { }
+};
+#endif
+
+static struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table: pci_mpc85xxcds_config_table,
+#endif
+};
+
+#endif /* CONFIG_PCI */
+
+void
+pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+ extern void pci_mpc85xx_init(struct pci_controller *hose);
+
+ pci_mpc85xx_init(&hose);
+#endif
+}
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/cds/mpc8548cds/u-boot.lds
new file mode 100644
index 0000000..36d2407
--- /dev/null
+++ b/board/cds/mpc8548cds/u-boot.lds
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/cds/mpc8548cds/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/cds/mpc8548cds/init.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ cpu/mpc85xx/pci.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
index a40de21..18adf5b 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/cds/mpc8555cds/mpc8555cds.c
@@ -30,7 +30,7 @@
#include "../common/cadmus.h"
#include "../common/eeprom.h"
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -269,7 +269,7 @@ initdram(int board_type)
#endif
dram_size = spd_sdram();
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
diff --git a/board/cds/mpc8555cds/u-boot.lds b/board/cds/mpc8555cds/u-boot.lds
index d14cb9c..5d45d38 100644
--- a/board/cds/mpc8555cds/u-boot.lds
+++ b/board/cds/mpc8555cds/u-boot.lds
@@ -69,7 +69,6 @@ SECTIONS
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/mpc8349ads/Makefile b/board/mpc8349ads/Makefile
new file mode 100644
index 0000000..4327b0d
--- /dev/null
+++ b/board/mpc8349ads/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8349ads/config.mk b/board/mpc8349ads/config.mk
new file mode 100644
index 0000000..4602169
--- /dev/null
+++ b/board/mpc8349ads/config.mk
@@ -0,0 +1,27 @@
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC83xxADS
+#
+
+TEXT_BASE = 0xFE700000
diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c
new file mode 100644
index 0000000..da8d3d7
--- /dev/null
+++ b/board/mpc8349ads/mpc8349ads.c
@@ -0,0 +1,276 @@
+/*
+ * Copyright Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#endif
+int fixed_sdram(void);
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+ volatile u8* bcsr = (volatile u8*)CFG_BCSR;
+
+ /* Enable flash write */
+ bcsr[1] &= ~0x01;
+
+ return 0;
+}
+
+
+#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
+
+long int initdram (int board_type)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ /* DDR SDRAM - Main SODIMM */
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram(NULL);
+#else
+ msize = fixed_sdram();
+#endif
+ /*
+ * Initialize SDRAM if it is on local bus.
+ */
+ sdram_init();
+ puts(" DDR RAM: ");
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return (msize * 1024 * 1024);
+}
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ u32 msize = 0;
+ u32 ddr_size;
+ u32 ddr_size_log2;
+
+ msize = CFG_DDR_SIZE;
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1);
+ ddr_size = ddr_size>>1, ddr_size_log2++) {
+ if (ddr_size & 1) {
+ return -1;
+ }
+ }
+ im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+#if (CFG_DDR_SIZE != 256)
+#warning Currenly any ddr size other than 256 is not supported
+#endif
+
+ im->ddr.csbnds[0].csbnds = 0x00100017;
+ im->ddr.csbnds[1].csbnds = 0x0018001f;
+ im->ddr.csbnds[2].csbnds = 0x00000007;
+ im->ddr.csbnds[3].csbnds = 0x0008000f;
+ im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+ im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+ im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+ im->ddr.cs_config[3] = CFG_DDR_CONFIG;
+ im->ddr.timing_cfg_1 =
+ 3 << TIMING_CFG1_PRETOACT_SHIFT |
+ 7 << TIMING_CFG1_ACTTOPRE_SHIFT |
+ 3 << TIMING_CFG1_ACTTORW_SHIFT |
+ 4 << TIMING_CFG1_CASLAT_SHIFT |
+ 3 << TIMING_CFG1_REFREC_SHIFT |
+ 3 << TIMING_CFG1_WRREC_SHIFT |
+ 2 << TIMING_CFG1_ACTTOACT_SHIFT |
+ 1 << TIMING_CFG1_WRTORD_SHIFT;
+ im->ddr.timing_cfg_2 = 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT;
+ im->ddr.sdram_cfg =
+ SDRAM_CFG_SREN
+#if defined(CONFIG_DDR_2T_TIMING)
+ | SDRAM_CFG_2T_EN
+#endif
+ | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
+ im->ddr.sdram_mode =
+ 0x2000 << SDRAM_MODE_ESD_SHIFT |
+ 0x0162 << SDRAM_MODE_SD_SHIFT;
+
+ im->ddr.sdram_interval = 0x045B << SDRAM_INTERVAL_REFINT_SHIFT |
+ 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT;
+ udelay(200);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+ return msize;
+}
+#endif/*!CFG_SPD_EEPROM*/
+
+
+int checkboard (void)
+{
+ puts("Board: Freescale MPC8349ADS\n");
+ return 0;
+}
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxads_config_table[] = {
+ {PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,
+ pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMON_MEMORY | PCI_COMMAND_MASTER
+ } },
+ {}
+}
+#endif
+
+
+volatile static struct pci_controller hose[] = {
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc83xxads_config_table,
+#endif
+ },
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc83xxads_config_table,
+#endif
+ }
+};
+#endif /* CONFIG_PCI */
+
+
+void
+pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+ extern void pci_mpc83xx_init(volatile struct pci_controller *hose);
+
+ pci_mpc83xx_init(hose);
+#endif /* CONFIG_PCI */
+}
+
+/*
+ * if MPC8349ADS is soldered with SDRAM
+ */
+#if defined(CFG_BR2_PRELIM) \
+ && defined(CFG_OR2_PRELIM) \
+ && defined(CFG_LBLAWBAR2_PRELIM) \
+ && defined(CFG_LBLAWAR2_PRELIM)
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void
+sdram_init(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+ volatile lbus8349_t *lbc= &immap->lbus;
+ uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+
+ puts("\n SDRAM on Local Bus: ");
+ print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+ /*
+ * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+ */
+
+ /*setup mtrpt, lsrt and lbcr for LB bus*/
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ lbc->lsrt = CFG_LBC_LSRT;
+ asm("sync");
+
+ /*
+ * Configure the SDRAM controller Machine Mode Register.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation*/
+
+ lbc->lsdmr = CFG_LBC_LSDMR_1; /*0x68636733;precharge all the banks*/
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_2;/*0x48636733;auto refresh*/
+ asm("sync");
+ /*1 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*2 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*3 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*4 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*5 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*6 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*7 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*8 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ /* 0x58636733;mode register write operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_4;
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /*0x40636733;normal operation*/
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+}
+#else
+void
+sdram_init(void)
+{
+ put("SDRAM on Local Bus is NOT available!\n");
+}
+#endif
diff --git a/board/mpc8349ads/u-boot.lds b/board/mpc8349ads/u-boot.lds
new file mode 100644
index 0000000..12c2d6f
--- /dev/null
+++ b/board/mpc8349ads/u-boot.lds
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c
index 01b0386..d0eb690 100644
--- a/board/mpc8540ads/mpc8540ads.c
+++ b/board/mpc8540ads/mpc8540ads.c
@@ -31,7 +31,7 @@
#include <asm/immap_85xx.h>
#include <spd.h>
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -96,7 +96,7 @@ initdram(int board_type)
dram_size = fixed_sdram ();
#endif
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
diff --git a/board/mpc8540ads/u-boot.lds b/board/mpc8540ads/u-boot.lds
index 56dd457..85852d5 100644
--- a/board/mpc8540ads/u-boot.lds
+++ b/board/mpc8540ads/u-boot.lds
@@ -70,7 +70,6 @@ SECTIONS
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile
new file mode 100644
index 0000000..6f1995e
--- /dev/null
+++ b/board/mpc8540eval/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o
+#OBJS := $(BOARD).o flash.o $(BOARD)_slave.o
+SOBJS := init.o
+#SOBJS :=
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8540eval/config.mk b/board/mpc8540eval/config.mk
new file mode 100644
index 0000000..68271bd
--- /dev/null
+++ b/board/mpc8540eval/config.mk
@@ -0,0 +1,34 @@
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,Motorola Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# gda8540 board
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+#TEXT_BASE = 0x1000000
+TEXT_BASE = 0xfff80000
+
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c
new file mode 100644
index 0000000..7300a04
--- /dev/null
+++ b/board/mpc8540eval/flash.c
@@ -0,0 +1,892 @@
+/*
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao,(X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if !defined(CFG_NO_FLASH)
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*
+ * The variable should be in the flash info structure. Since it
+ * is only used in this board specific file it is declared here.
+ * In the future I think an endian flag should be part of the
+ * flash_info_t structure. (Ron Alder)
+ */
+static ulong big_endian = 0;
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_block (flash_info_t *info, uchar * src, ulong dest, ulong cnt);
+static int write_short (flash_info_t *info, ulong dest, ushort data);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(flash_info_t *info, vu_long * addr);
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+
+ /* Init: enable write,
+ * or we cannot even write flash commands
+ */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ /* set the default sector offset */
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size;
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+monitor_flash_len-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+#endif
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_SHARP: printf ("Sharp "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+ break;
+ case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+ break;
+ case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+ break;
+ case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+ break;
+ case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+ /* only deal with 16 bit and 32 bit port width, 16bit chip */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value,va,vb,vc,vd;
+ ulong base = (ulong)addr;
+ ulong sector_offset;
+
+#ifdef DEBUG
+ printf("Check flash at 0x%08x\n",(uint)addr);
+#endif
+ /* Write "Intelligent Identifier" command: read Manufacturer ID */
+ *addr = 0x90909090;
+ udelay(20);
+ asm("sync");
+
+#ifndef CFG_FLASH_CFI
+ printf("Not define CFG_FLASH_CFI\n");
+ return (0);
+#else
+ value = addr[0];
+ va=(value & 0xFF000000)>>24;
+ vb=(value & 0x00FF0000)>>16;
+ vc=(value & 0x0000FF00)>>8;
+ vd=(value & 0x000000FF);
+ if ((va==0) && (vb==0)) {
+ printf("cannot identify Flash\n");
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+ else if ((va==0) && (vb!=0)) {
+ big_endian = 1;
+ info->chipwidth = FLASH_CFI_BY16;
+ if(vb == vd) info->portwidth = FLASH_CFI_32BIT;
+ else info->portwidth = FLASH_CFI_16BIT;
+ }
+ else if ((va!=0) && (vb==0)) {
+ big_endian = 0;
+ info->chipwidth = FLASH_CFI_BY16;
+ if(va == vc) info->portwidth = FLASH_CFI_32BIT;
+ else info->portwidth = FLASH_CFI_16BIT;
+ }
+ else if ((va!=0) && (vb!=0)) {
+ big_endian = 1; /* no meaning for 8bit chip */
+ info->chipwidth = FLASH_CFI_BY8;
+ if(va == vb) info->portwidth = FLASH_CFI_16BIT;
+ else info->portwidth = FLASH_CFI_8BIT;
+ }
+#ifdef DEBUG
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ printf("port width is 8 bit.\n");
+ break;
+ case FLASH_CFI_16BIT:
+ printf("port width is 16 bit, ");
+ break;
+ case FLASH_CFI_32BIT:
+ printf("port width is 32 bit, ");
+ break;
+ }
+ switch (info->chipwidth) {
+ case FLASH_CFI_BY16:
+ printf("chip width is 16 bit, ");
+ switch (big_endian) {
+ case 0:
+ printf("Little Endian.\n");
+ break;
+ case 1:
+ printf("Big Endian.\n");
+ break;
+ }
+ break;
+ }
+#endif
+#endif /*#ifdef CFG_FLASH_CFI*/
+
+ if (big_endian==0) value = (addr[0] & 0xFF000000) >>8;
+ else value = (addr[0] & 0x00FF0000);
+#ifdef DEBUG
+ printf("manufacturer=0x%x\n",(uint)(value>>16));
+#endif
+ switch (value) {
+ case MT_MANUFACT & 0xFFFF0000: /* SHARP, MT or => Intel */
+ case INTEL_ALT_MANU & 0xFFFF0000:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ printf("unknown manufacturer: %x\n", (unsigned int)value);
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ if (info->portwidth==FLASH_CFI_16BIT) {
+ switch (big_endian) {
+ case 0:
+ value = (addr[0] & 0x0000FF00)>>8;
+ break;
+ case 1:
+ value = (addr[0] & 0x000000FF);
+ break;
+ }
+ }
+ else if (info->portwidth == FLASH_CFI_32BIT) {
+ switch (big_endian) {
+ case 0:
+ value = (addr[1] & 0x0000FF00)>>8;
+ break;
+ case 1:
+ value = (addr[1] & 0x000000FF);
+ break;
+ }
+ }
+
+#ifdef DEBUG
+ printf("deviceID=0x%x\n",(uint)value);
+#endif
+ switch (value) {
+ case (INTEL_ID_28F016S & 0x0000FFFF):
+ info->flash_id += FLASH_28F016SV;
+ info->sector_count = 32;
+ sector_offset = 0x10000;
+ break; /* => 2 MB */
+
+ case (INTEL_ID_28F160S3 & 0x0000FFFF):
+ info->flash_id += FLASH_28F160S3;
+ info->sector_count = 32;
+ sector_offset = 0x10000;
+ break; /* => 2 MB */
+
+ case (INTEL_ID_28F320S3 & 0x0000FFFF):
+ info->flash_id += FLASH_28F320S3;
+ info->sector_count = 64;
+ sector_offset = 0x10000;
+ break; /* => 4 MB */
+
+ case (INTEL_ID_28F640J3A & 0x0000FFFF):
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ sector_offset = 0x20000;
+ break; /* => 8 MB */
+
+ case SHARP_ID_28F016SCL & 0x0000FFFF:
+ case SHARP_ID_28F016SCZ & 0x0000FFFF:
+ info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+ info->sector_count = 32;
+ sector_offset = 0x10000;
+ break; /* => 2 MB */
+
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ sector_offset = sector_offset * (info->portwidth / info->chipwidth);
+ info->size = info->sector_count * sector_offset;
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += sector_offset;
+ /* don't know how to check sector protection */
+ info->protect[i] = 0;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+ *addr = 0xFFFFFF; /* reset bank to read array mode */
+ asm("sync");
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last, ready, erase_err_status;
+
+ if (big_endian == 1) {
+ ready = 0x0080;
+ erase_err_status = 0x00a0;
+ }
+ else {
+ ready = 0x8000;
+ erase_err_status = 0xa000;
+ }
+ if ((info->portwidth / info->chipwidth)==2) {
+ ready += (ready <<16);
+ erase_err_status += (erase_err_status <<16);
+ }
+
+#ifdef DEBUG
+ printf ("\nReady flag is 0x%lx\nErase error flag is 0x%lx", ready, erase_err_status);
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+ && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+#ifdef DEBUG
+ printf("\nFlash Erase:\n");
+#endif
+ /* Make Sure Block Lock Bit is not set. */
+ if(clear_block_lock_bit(info, (vu_long *)(info->start[s_first]))){
+ return 1;
+ }
+
+ /* Start erase on unprotected sectors */
+#if defined(DEBUG)
+ printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
+#endif
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_short *addr16 = (vu_short *)(info->start[sect]);
+ vu_long *addr = (vu_long *)(info->start[sect]);
+ printf(".");
+ switch (info->portwidth) {
+ case FLASH_CFI_16BIT:
+ asm("sync");
+ last = start = get_timer (0);
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ /* Reset Array */
+ *addr16 = 0xffff;
+ asm("sync");
+ /* Clear Status Register */
+ *addr16 = 0x5050;
+ asm("sync");
+ /* Single Block Erase Command */
+ *addr16 = 0x2020;
+ asm("sync");
+ /* Confirm */
+ *addr16 = 0xD0D0;
+ asm("sync");
+ if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+ /* Resume Command, as per errata update */
+ *addr16 = 0xD0D0;
+ asm("sync");
+ }
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+ /* wait at least 80us - let's wait 1 ms */
+ *addr16 = 0x7070;
+ udelay (1000);
+ while ((*addr16 & ready) != ready) {
+ if((*addr16 & erase_err_status)== erase_err_status){
+ printf("Error in Block Erase - Lock Bit may be set!\n");
+ printf("Status Register = 0x%X\n", (uint)*addr16);
+ *addr16 = 0xFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr16 = 0xFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ /* reset to read mode */
+ *addr16 = 0xFFFF;
+ asm("sync");
+ break;
+ case FLASH_CFI_32BIT:
+ asm("sync");
+ last = start = get_timer (0);
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ /* Reset Array */
+ *addr = 0xffffffff;
+ asm("sync");
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ asm("sync");
+ /* Single Block Erase Command */
+ *addr = 0x20202020;
+ asm("sync");
+ /* Confirm */
+ *addr = 0xD0D0D0D0;
+ asm("sync");
+ if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+ /* Resume Command, as per errata update */
+ *addr = 0xD0D0D0D0;
+ asm("sync");
+ }
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+ /* wait at least 80us - let's wait 1 ms */
+ *addr = 0x70707070;
+ udelay (1000);
+ while ((*addr & ready) != ready) {
+ if((*addr & erase_err_status)==erase_err_status){
+ printf("Error in Block Erase - Lock Bit may be set!\n");
+ printf("Status Register = 0x%X\n", (uint)*addr);
+ *addr = 0xFFFFFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ /* reset to read mode */
+ *addr = 0xFFFFFFFF;
+ asm("sync");
+ break;
+ } /* end switch */
+ } /* end if */
+ } /* end for */
+
+ printf ("flash erase done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+#define FLASH_BLOCK_SIZE 32
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data, count, temp;
+/* ulong temp[FLASH_BLOCK_SIZE/4];*/
+ int i, l, rc;
+
+ count = cnt;
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ cp = wp;
+ /* handle unaligned block bytes , flash block size = 16bytes */
+ wp = (cp+FLASH_BLOCK_SIZE-1) & ~(FLASH_BLOCK_SIZE-1);
+ if ((wp-cp)>=cnt) {
+ if ((rc = write_block(info,src,cp,wp-cp)) !=0)
+ return (rc);
+ src += wp-cp;
+ cnt -= wp-cp;
+ }
+ /* handle aligned block bytes */
+ temp = 0;
+ printf("\n");
+ while ( cnt >= FLASH_BLOCK_SIZE) {
+ if ((rc = write_block(info,src,cp,FLASH_BLOCK_SIZE)) !=0) {
+ return (rc);
+ }
+ src += FLASH_BLOCK_SIZE;
+ cp += FLASH_BLOCK_SIZE;
+ cnt -= FLASH_BLOCK_SIZE;
+ if (((count-cnt)>>10)>temp) {
+ temp=(count-cnt)>>10;
+ printf("\r%d KB",temp);
+ }
+ }
+ printf("\n");
+ wp = cp;
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+#undef FLASH_BLOCK_SIZE
+
+/*-----------------------------------------------------------------------
+ * Write block to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * -1 Error
+ */
+static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt)
+{
+ vu_short *baddr, *addr = (vu_short *)dest;
+ ushort data;
+ ulong start, now, xsr,csr, ready;
+ int flag;
+
+ if (cnt==0) return 0;
+ else if(cnt != (cnt& ~1)) return -1;
+
+ /* Check if Flash is (sufficiently) erased */
+ data = * src;
+ data = (data<<8) | *(src+1);
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ if (big_endian == 1) {
+ ready = 0x0080;
+ }
+ else {
+ ready = 0x8000;
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ do {
+ /* Write Command */
+ *addr = 0xe8e8;
+ asm("sync");
+ xsr = *addr;
+ asm("sync");
+ } while (!(xsr & ready)); /*wait until read */
+ /*write count=BLOCK SIZE -1 */
+ data=(cnt>>1)-1;
+ data=(data<<8)|data;
+ *addr = data; /* word mode, cnt/2 */
+ asm("sync");
+ baddr = addr;
+ while(cnt) {
+ data = * src++;
+ data = (data<<8) | *src++;
+ asm("sync");
+ *baddr = data;
+ asm("sync");
+ ++baddr;
+ cnt = cnt -2;
+ }
+ *addr = 0xd0d0; /* confirm write */
+ start = get_timer(0);
+ asm("sync");
+ if (flag)
+ enable_interrupts();
+ /* data polling for D7 */
+ flag = 0;
+ while (((csr = *addr) & ready) != ready) {
+ if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x4040) {
+ printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+ /* Clear Status Registers Command */
+ *addr = 0x5050;
+ asm("sync");
+ /* Reset to read array mode */
+ *addr = 0xFFFF;
+ asm("sync");
+ return (flag);
+}
+
+
+/*-----------------------------------------------------------------------
+ * Write a short word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_short (flash_info_t *info, ulong dest, ushort data)
+{
+ vu_short *addr = (vu_short *)dest;
+ ulong start, now, csr, ready;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = 0x1010;
+ start = get_timer (0);
+ asm("sync");
+ /* Write Data */
+ *addr = data;
+ asm("sync");
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+ if (big_endian == 1) {
+ ready = 0x0080;
+ }
+ else {
+ ready = 0x8000;
+ }
+ /* data polling for D7 */
+ flag = 0;
+ while (((csr = *addr) & ready) != ready) {
+ if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x4040) {
+ printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+ /* Clear Status Registers Command */
+ *addr = 0x5050;
+ asm("sync");
+ /* Reset to read array mode */
+ *addr = 0xFFFF;
+ asm("sync");
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start, csr, ready;
+ int flag=0;
+
+ switch (info->portwidth) {
+ case FLASH_CFI_32BIT:
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ if (big_endian == 1) {
+ ready = 0x0080;
+ }
+ else {
+ ready = 0x8000;
+ }
+ if ((info->portwidth / info->chipwidth)==2) {
+ ready += (ready <<16);
+ }
+ else {
+ ready = ready << 16;
+ }
+ /* Write Command */
+ *addr = 0x10101010;
+ asm("sync");
+ /* Write Data */
+ *addr = data;
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+ /* data polling for D7 */
+ start = get_timer (0);
+ flag = 0;
+ while (((csr = *addr) & ready) != ready) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x40404040) {
+ printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+ /* Clear Status Registers Command */
+ *addr = 0x50505050;
+ asm("sync");
+ /* Reset to read array mode */
+ *addr = 0xFFFFFFFF;
+ asm("sync");
+ break;
+ case FLASH_CFI_16BIT:
+ flag = write_short (info, dest, (unsigned short) (data>>16));
+ if (flag == 0)
+ flag = write_short (info, dest+2, (unsigned short) (data));
+ break;
+ }
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(flash_info_t * info, vu_long * addr)
+{
+ ulong start, now, ready;
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ asm("sync");
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ asm("sync");
+
+ *addr = 0x60606060;
+ asm("sync");
+ *addr = 0xd0d0d0d0;
+ asm("sync");
+
+
+ if (big_endian == 1) {
+ ready = 0x0080;
+ }
+ else {
+ ready = 0x8000;
+ }
+ if ((info->portwidth / info->chipwidth)==2) {
+ ready += (ready <<16);
+ }
+ else {
+ ready = ready << 16;
+ }
+#ifdef DEBUG
+ printf ("%s: Ready flag is 0x%8lx\n", __FUNCTION__, ready);
+#endif
+ *addr = 0x70707070; /* read status */
+ start = get_timer (0);
+ while((*addr & ready) != ready){
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout on clearing Block Lock Bit\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+#endif /* !CFG_NO_FLASH */
diff --git a/board/mpc8540eval/init.S b/board/mpc8540eval/init.S
new file mode 100644
index 0000000..8c2ca65
--- /dev/null
+++ b/board/mpc8540eval/init.S
@@ -0,0 +1,178 @@
+/*
+* Copyright (C) 2002,2003, Motorola Inc.
+* Xianghua Xiao <X.Xiao@motorola.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+/* TLB1 entries configuration: */
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ .long 0x0a /* the following data table uses a few of 16 TLB entries */
+
+ .long TLB1_MAS0(1,1,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ #if defined(CFG_FLASH_PORT_WIDTH_16)
+ .long TLB1_MAS0(1,2,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+ .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,3,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+ .long TLB1_MAS2((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
+ #else
+ .long TLB1_MAS0(1,2,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
+ .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,3,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ #endif
+
+ #if !defined(CONFIG_SPD_EEPROM)
+ .long TLB1_MAS0(1,4,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,5,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+ .long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ #else
+ .long TLB1_MAS0(1,4,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,5,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ #endif
+
+ .long TLB1_MAS0(1,6,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+ #if defined(CONFIG_RAM_AS_FLASH)
+ .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ #else
+ .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ #endif
+ .long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,7,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+ #ifdef CONFIG_L2_INIT_RAM
+ .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+ #else
+ .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ #endif
+ .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,8,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,9,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+ .long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ .long TLB1_MAS0(1,15,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ #else
+ .long TLB1_MAS0(1,15,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ #endif
+ entry_end
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(128M) -or- larger
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ * f800_0000-fbff_ffff: LBC SDRAM(64M)
+ * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
+ * fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ * fe00_0000-ffff_ffff: Flash(32M)
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ * Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR0 0
+#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR2 0
+#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+ .section .bootpg, "ax"
+ .globl law_entry
+law_entry:
+ entry_start
+ .long 0x03
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
+ entry_end
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
new file mode 100644
index 0000000..3b3c8ed
--- /dev/null
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -0,0 +1,251 @@
+/*
+ * (C) Copyright 2002,2003, Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+extern long int spd_sdram (void);
+
+long int fixed_sdram (void);
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_PCI)
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_pcix_t *pci = &immr->im_pcix;
+
+ pci->peer &= 0xffffffdf; /* disable master abort */
+#endif
+ return 0;
+}
+
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info (&sysinfo);
+
+ printf ("Board: Freescale MPC8540EVAL Board\n");
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
+ printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
+ if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
+ || (CFG_LBC_LCRR & 0x0f) == 8) {
+ printf ("\tLBC: %lu MHz\n",
+ sysinfo.freqSystemBus / 1000000/(CFG_LBC_LCRR & 0x0f));
+ } else {
+ printf("\tLBC: unknown\n");
+ }
+ printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
+ return (0);
+}
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+ extern long spd_sdram (void);
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if !defined(CONFIG_RAM_AS_FLASH)
+ volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+ sys_info_t sysinfo;
+ uint temp_lbcdll = 0;
+#endif
+#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
+ volatile ccsr_gur_t *gur= &immap->im_gur;
+#endif
+
+#if defined(CONFIG_DDR_DLL)
+ uint temp_ddrdll = 0;
+
+ /* Work around to stabilize DDR DLL */
+ temp_ddrdll = gur->ddrdllcr;
+ gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+ asm("sync;isync;msync");
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram ();
+#else
+ dram_size = fixed_sdram ();
+#endif
+
+#if defined(CFG_RAMBOOT)
+ return dram_size;
+#endif
+
+#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
+ get_sys_info(&sysinfo);
+ /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+ if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
+ lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+ } else {
+ lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
+ udelay(200);
+ temp_lbcdll = gur->lbcdllcr;
+ gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
+ asm("sync;isync;msync");
+ }
+ lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
+ lbc->br2 = CFG_BR2_PRELIM;
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->lsdmr = CFG_LBC_LSDMR_1;
+ asm("sync");
+ * (ulong *)0 = 0x000000ff;
+ lbc->lsdmr = CFG_LBC_LSDMR_2;
+ asm("sync");
+ * (ulong *)0 = 0x000000ff;
+ lbc->lsdmr = CFG_LBC_LSDMR_3;
+ asm("sync");
+ * (ulong *)0 = 0x000000ff;
+ lbc->lsdmr = CFG_LBC_LSDMR_4;
+ asm("sync");
+ * (ulong *)0 = 0x000000ff;
+ lbc->lsdmr = CFG_LBC_LSDMR_5;
+ asm("sync");
+ lbc->lsrt = CFG_LBC_LSRT;
+ asm("sync");
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ asm("sync");
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+ {
+ /* Initialize all of memory for ECC, then
+ * enable errors */
+ uint *p = 0;
+ uint i = 0;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ dma_init();
+ for (*p = 0; p < (uint *)(8 * 1024); p++) {
+ if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
+ *p = (unsigned int)0xdeadbeef;
+ if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
+ }
+
+ /* 8K */
+ dma_xfer((uint *)0x2000,0x2000,(uint *)0);
+ /* 16K */
+ dma_xfer((uint *)0x4000,0x4000,(uint *)0);
+ /* 32K */
+ dma_xfer((uint *)0x8000,0x8000,(uint *)0);
+ /* 64K */
+ dma_xfer((uint *)0x10000,0x10000,(uint *)0);
+ /* 128k */
+ dma_xfer((uint *)0x20000,0x20000,(uint *)0);
+ /* 256k */
+ dma_xfer((uint *)0x40000,0x40000,(uint *)0);
+ /* 512k */
+ dma_xfer((uint *)0x80000,0x80000,(uint *)0);
+ /* 1M */
+ dma_xfer((uint *)0x100000,0x100000,(uint *)0);
+ /* 2M */
+ dma_xfer((uint *)0x200000,0x200000,(uint *)0);
+ /* 4M */
+ dma_xfer((uint *)0x400000,0x400000,(uint *)0);
+
+ for (i = 1; i < dram_size / 0x800000; i++) {
+ dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
+ }
+
+ /* Enable errors for ECC */
+ ddr->err_disable = 0x00000000;
+ asm("sync;isync;msync");
+ }
+#endif
+
+ return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("SDRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("SDRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("SDRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+#ifndef CFG_RAMBOOT
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+
+ ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+ ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+ ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+ ddr->sdram_mode = CFG_DDR_MODE;
+ ddr->sdram_interval = CFG_DDR_INTERVAL;
+#if defined (CONFIG_DDR_ECC)
+ ddr->err_disable = 0x0000000D;
+ ddr->err_sbe = 0x00ff0000;
+#endif
+ asm("sync;isync;msync");
+ udelay(500);
+#if defined (CONFIG_DDR_ECC)
+ /* Enable ECC checking */
+ ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+#else
+ ddr->sdram_cfg = CFG_DDR_CONTROL;
+#endif
+ asm("sync; isync; msync");
+ udelay(500);
+#endif
+ return (CFG_SDRAM_SIZE * 1024 * 1024);
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/mpc8540eval/u-boot.lds b/board/mpc8540eval/u-boot.lds
new file mode 100644
index 0000000..2479af1
--- /dev/null
+++ b/board/mpc8540eval/u-boot.lds
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2002,2003, Motorola,Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Assumes that the size of u-boot is less than 512K and the
+ * start address is aligned on a 512K block.
+ * Boot page and reset vector is put at that end of the 512K block. */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/mpc8540eval/init.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ cpu/mpc85xx/pci.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+
+ . = (. & 0xFFF80000) + 0x0007F000;
+ .bootpg :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/mpc8540eval/init.o (.bootpg)
+ } = 0xffff
+
+ . = (. & 0xFFF80000) + 0x0007FFFC;
+ .resetvec :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+}
diff --git a/board/mpc8560ads/config.mk b/board/mpc8560ads/config.mk
index 53e3edb..9aef2bb 100644
--- a/board/mpc8560ads/config.mk
+++ b/board/mpc8560ads/config.mk
@@ -29,5 +29,4 @@
TEXT_BASE = 0xfff80000
PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 1990e54..9accc5c 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -33,7 +33,7 @@
#include <spd.h>
#include <miiphy.h>
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -293,7 +293,7 @@ initdram(int board_type)
dram_size = fixed_sdram ();
#endif
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
diff --git a/board/mpc8560ads/u-boot.lds b/board/mpc8560ads/u-boot.lds
index 4c6c7db..c307d63 100644
--- a/board/mpc8560ads/u-boot.lds
+++ b/board/mpc8560ads/u-boot.lds
@@ -73,7 +73,6 @@ SECTIONS
cpu/mpc85xx/ether_fcc.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/i2c.o (.text)
cpu/mpc85xx/spd_sdram.o (.text)
diff --git a/board/pm854/u-boot.lds b/board/pm854/u-boot.lds
index 5f24f76..4db6b34 100644
--- a/board/pm854/u-boot.lds
+++ b/board/pm854/u-boot.lds
@@ -70,7 +70,6 @@ SECTIONS
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/sbc8560/config.mk b/board/sbc8560/config.mk
index 3c8cfbe..6d9ae45 100644
--- a/board/sbc8560/config.mk
+++ b/board/sbc8560/config.mk
@@ -30,5 +30,4 @@
TEXT_BASE = 0xfffc0000
PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/stxgp3/config.mk b/board/stxgp3/config.mk
index 14c1f01..2427818 100644
--- a/board/stxgp3/config.mk
+++ b/board/stxgp3/config.mk
@@ -29,5 +29,4 @@
TEXT_BASE = 0xfff80000
PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/stxgp3/u-boot.lds b/board/stxgp3/u-boot.lds
index 5879946..dae5acb 100644
--- a/board/stxgp3/u-boot.lds
+++ b/board/stxgp3/u-boot.lds
@@ -78,7 +78,6 @@ SECTIONS
cpu/mpc85xx/ether_fcc.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/i2c.o (.text)
cpu/mpc85xx/spd_sdram.o (.text)
diff --git a/board/tqm8540/u-boot.lds b/board/tqm8540/u-boot.lds
index eb84aeb..ffd7562 100644
--- a/board/tqm8540/u-boot.lds
+++ b/board/tqm8540/u-boot.lds
@@ -70,7 +70,6 @@ SECTIONS
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/board/tqm8560/u-boot.lds b/board/tqm8560/u-boot.lds
index 19b77be..ebe2240 100644
--- a/board/tqm8560/u-boot.lds
+++ b/board/tqm8560/u-boot.lds
@@ -70,7 +70,6 @@ SECTIONS
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
cpu/mpc85xx/cpu.o (.text)
- cpu/mpc85xx/tsec.o (.text)
cpu/mpc85xx/speed.o (.text)
cpu/mpc85xx/pci.o (.text)
common/dlmalloc.o (.text)
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 6f29e2f..4914ac5 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -70,13 +70,13 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
-#if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
print_str ("vco", strmhz(buf, bd->bi_vco));
print_str ("sccfreq", strmhz(buf, bd->bi_sccfreq));
print_str ("brgfreq", strmhz(buf, bd->bi_brgfreq));
#endif
print_str ("intfreq", strmhz(buf, bd->bi_intfreq));
-#if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
print_str ("cpmfreq", strmhz(buf, bd->bi_cpmfreq));
#endif
print_str ("busfreq", strmhz(buf, bd->bi_busfreq));
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index a90735f..c200fd8 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -580,12 +580,12 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
kbd->bi_flbfreq /= 1000000L;
kbd->bi_vcofreq /= 1000000L;
#endif
-#if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
kbd->bi_cpmfreq /= 1000000L;
kbd->bi_brgfreq /= 1000000L;
kbd->bi_sccfreq /= 1000000L;
kbd->bi_vco /= 1000000L;
-#endif /* CONFIG_8260 */
+#endif
#if defined(CONFIG_MPC5xxx)
kbd->bi_ipbfreq /= 1000000L;
kbd->bi_pcifreq /= 1000000L;
diff --git a/config.mk b/config.mk
index 75bbac5..ff83091 100644
--- a/config.mk
+++ b/config.mk
@@ -161,6 +161,10 @@ BFD_ROOT_DIR = /opt/powerpc
endif
endif
+ifeq ($(PCI_CLOCK),PCI_66M)
+CFLAGS := $(CFLAGS) -DPCI_66M
+endif
+
#########################################################################
export CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
diff --git a/cpu/mpc8260/config.mk b/cpu/mpc8260/config.mk
index 3b28924..dd7a71f 100644
--- a/cpu/mpc8260/config.mk
+++ b/cpu/mpc8260/config.mk
@@ -23,5 +23,5 @@
PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_8260 -ffixed-r2 -ffixed-r29 \
+PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 -ffixed-r29 \
-mstring -mcpu=603e -mmultiple
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
new file mode 100644
index 0000000..14574f4
--- /dev/null
+++ b/cpu/mpc83xx/Makefile
@@ -0,0 +1,53 @@
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o \
+ resetvec.o
+
+COBJS = traps.o \
+ cpu.o \
+ cpu_init.o \
+ speed.o \
+ interrupts.o \
+ pci.o \
+ i2c.o \
+ spd_sdram.o
+
+OBJS = $(COBJS)
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/mpc83xx/config.mk b/cpu/mpc83xx/config.mk
new file mode 100644
index 0000000..8b4ff92
--- /dev/null
+++ b/cpu/mpc83xx/config.mk
@@ -0,0 +1,26 @@
+#
+# Copyright 2004 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC83XX -DCONFIG_E300 \
+ -ffixed-r2 -ffixed-r29 -msoft-float
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
new file mode 100644
index 0000000..c84aeb4
--- /dev/null
+++ b/cpu/mpc83xx/cpu.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+/*
+ * CPU specific code for the MPC83xx family.
+ *
+ * Derived from the MPC8260 and MPC85xx.
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc83xx.h>
+#include <asm/processor.h>
+
+
+int checkcpu(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ ulong clock = gd->cpu_clk;
+ u32 pvr = get_pvr();
+ char buf[32];
+
+ if ((pvr & 0xFFFF0000) != PVR_83xx) {
+ puts("Not MPC83xx Family!!!\n");
+ return -1;
+ }
+
+ puts("CPU: MPC83xx, ");
+ switch(pvr) {
+ case PVR_8349_REV10:
+ break;
+ case PVR_8349_REV11:
+ break;
+ default:
+ puts("Rev: Unknown\n");
+ return -1; /* Not sure what this is */
+ }
+ printf("Rev: %02x at %s MHz\n",pvr & 0x0000FFFF, strmhz(buf, clock));
+ return 0;
+}
+
+
+void upmconfig (uint upm, uint *table, uint size)
+{
+ hang(); /* FIXME: upconfig() needed? */
+}
+
+
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr;
+#ifndef MPC83xx_RESET
+ ulong addr;
+#endif
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+
+#ifdef MPC83xx_RESET
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~( MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /* enable Reset Control Reg */
+ immap->reset.rpr = 0x52535445;
+
+ /* confirm Reset Control Reg is enabled */
+ while(!((immap->reset.rcer) & RCER_CRE));
+
+ printf("Resetting the board.");
+ printf("\n");
+
+ udelay(200);
+
+ /* perform reset, only one bit */
+ immap->reset.rcr = RCR_SWHR;
+
+#else /* ! MPC83xx_RESET */
+
+ immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+ addr = CFG_RESET_ADDRESS;
+
+ printf("resetting the board.");
+ printf("\n");
+ ((void (*)(void)) addr) ();
+#endif /* MPC83xx_RESET */
+
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+
+unsigned long get_tbclk(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return tbclk;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ hang(); /* FIXME: implement watchdog_reset()? */
+}
+#endif /* CONFIG_WATCHDOG */
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
new file mode 100644
index 0000000..dcb3445
--- /dev/null
+++ b/cpu/mpc83xx/cpu_init.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <ioports.h>
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* RSR - Reset Status Register - clear all status (4.6.1.3) */
+ gd->reset_status = im->reset.rsr;
+ im->reset.rsr = ~(RSR_RES);
+
+ /*
+ * RMR - Reset Mode Register
+ * contains checkstop reset enable (4.6.1.4)
+ */
+ im->reset.rmr = (RMR_CSRE & (1<<RMR_CSRE_SHIFT));
+
+ /* LCRR - Clock Ratio Register (10.3.1.16) */
+ im->lbus.lcrr = CFG_LCRR;
+
+ /* Enable Time Base & Decrimenter ( so we will have udelay() )*/
+ im->sysconf.spcr |= SPCR_TBEN;
+
+ /* System General Purpose Register */
+ im->sysconf.sicrh = SICRH_TSOBI1;
+ im->sysconf.sicrl = SICRL_LDP_A;
+
+ /*
+ * Memory Controller:
+ */
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CFG_BR0_PRELIM) \
+ && defined(CFG_OR0_PRELIM) \
+ && defined(CFG_LBLAWBAR0_PRELIM) \
+ && defined(CFG_LBLAWAR0_PRELIM)
+ im->lbus.bank[0].br = CFG_BR0_PRELIM;
+ im->lbus.bank[0].or = CFG_OR0_PRELIM;
+ im->sysconf.lblaw[0].bar = CFG_LBLAWBAR0_PRELIM;
+ im->sysconf.lblaw[0].ar = CFG_LBLAWAR0_PRELIM;
+#else
+#error CFG_BR0_PRELIM, CFG_OR0_PRELIM, CFG_LBLAWBAR0_PRELIM & CFG_LBLAWAR0_PRELIM must be defined
+#endif
+
+#if defined(CFG_BR1_PRELIM) \
+ && defined(CFG_OR1_PRELIM) \
+ && defined(CFG_LBLAWBAR1_PRELIM) \
+ && defined(CFG_LBLAWAR1_PRELIM)
+ im->lbus.bank[1].br = CFG_BR1_PRELIM;
+ im->lbus.bank[1].or = CFG_OR1_PRELIM;
+ im->sysconf.lblaw[1].bar = CFG_LBLAWBAR1_PRELIM;
+ im->sysconf.lblaw[1].ar = CFG_LBLAWAR1_PRELIM;
+#endif
+#if defined(CFG_BR2_PRELIM) \
+ && defined(CFG_OR2_PRELIM) \
+ && defined(CFG_LBLAWBAR2_PRELIM) \
+ && defined(CFG_LBLAWAR2_PRELIM)
+ im->lbus.bank[2].br = CFG_BR2_PRELIM;
+ im->lbus.bank[2].or = CFG_OR2_PRELIM;
+ im->sysconf.lblaw[2].bar = CFG_LBLAWBAR2_PRELIM;
+ im->sysconf.lblaw[2].ar = CFG_LBLAWAR2_PRELIM;
+#endif
+#if defined(CFG_BR3_PRELIM) \
+ && defined(CFG_OR3_PRELIM) \
+ && defined(CFG_LBLAWBAR3_PRELIM) \
+ && defined(CFG_LBLAWAR3_PRELIM)
+ im->lbus.bank[3].br = CFG_BR3_PRELIM;
+ im->lbus.bank[3].or = CFG_OR3_PRELIM;
+ im->sysconf.lblaw[3].bar = CFG_LBLAWBAR3_PRELIM;
+ im->sysconf.lblaw[3].ar = CFG_LBLAWAR3_PRELIM;
+#endif
+#if defined(CFG_BR4_PRELIM) \
+ && defined(CFG_OR4_PRELIM) \
+ && defined(CFG_LBLAWBAR4_PRELIM) \
+ && defined(CFG_LBLAWAR4_PRELIM)
+ im->lbus.bank[4].br = CFG_BR4_PRELIM;
+ im->lbus.bank[4].or = CFG_OR4_PRELIM;
+ im->sysconf.lblaw[4].bar = CFG_LBLAWBAR4_PRELIM;
+ im->sysconf.lblaw[4].ar = CFG_LBLAWAR4_PRELIM;
+#endif
+#if defined(CFG_BR5_PRELIM) \
+ && defined(CFG_OR5_PRELIM) \
+ && defined(CFG_LBLAWBAR5_PRELIM) \
+ && defined(CFG_LBLAWAR5_PRELIM)
+ im->lbus.bank[5].br = CFG_BR5_PRELIM;
+ im->lbus.bank[5].or = CFG_OR5_PRELIM;
+ im->sysconf.lblaw[5].bar = CFG_LBLAWBAR5_PRELIM;
+ im->sysconf.lblaw[5].ar = CFG_LBLAWAR5_PRELIM;
+#endif
+#if defined(CFG_BR6_PRELIM) \
+ && defined(CFG_OR6_PRELIM) \
+ && defined(CFG_LBLAWBAR6_PRELIM) \
+ && defined(CFG_LBLAWAR6_PRELIM)
+ im->lbus.bank[6].br = CFG_BR6_PRELIM;
+ im->lbus.bank[6].or = CFG_OR6_PRELIM;
+ im->sysconf.lblaw[6].bar = CFG_LBLAWBAR6_PRELIM;
+ im->sysconf.lblaw[6].ar = CFG_LBLAWAR6_PRELIM;
+#endif
+#if defined(CFG_BR7_PRELIM) \
+ && defined(CFG_OR7_PRELIM) \
+ && defined(CFG_LBLAWBAR7_PRELIM) \
+ && defined(CFG_LBLAWAR7_PRELIM)
+ im->lbus.bank[7].br = CFG_BR7_PRELIM;
+ im->lbus.bank[7].or = CFG_OR7_PRELIM;
+ im->sysconf.lblaw[7].bar = CFG_LBLAWBAR7_PRELIM;
+ im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM;
+#endif
+}
+
+
+/*
+ * Initialize higher level parts of CPU like time base and timers.
+ */
+
+int cpu_init_r (void)
+{
+ return 0;
+}
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
new file mode 100644
index 0000000..3db7d2c
--- /dev/null
+++ b/cpu/mpc83xx/i2c.c
@@ -0,0 +1,251 @@
+/*
+ * (C) Copyright 2003,Motorola Inc.
+ * Xianghua Xiao <x.xiao@motorola.com>
+ * Adapted for Motorola 85xx chip.
+ *
+ * (C) Copyright 2003
+ * Gleb Natapov <gnatapov@mrv.com>
+ * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
+ *
+ * Hardware I2C driver for MPC107 PCI bridge.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_HARD_I2C
+#include <i2c.h>
+#include <asm/i2c.h>
+
+#ifdef CONFIG_MPC8349ADS
+i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
+#endif
+
+void
+i2c_init(int speed, int slaveadd)
+{
+ /* stop I2C controller */
+ writeb(0x00 , &I2C->cr);
+
+ /* set clock */
+ writeb(0x3f, &I2C->fdr);
+
+ /* set default filter */
+ writeb(0x10,&I2C->dfsrr);
+
+ /* write slave address */
+ writeb(slaveadd, &I2C->adr);
+
+ /* clear status register */
+ writeb(0x00, &I2C->sr);
+
+ /* start I2C controller */
+ writeb(I2C_CR_MEN, &I2C->cr);
+}
+
+static __inline__ int
+i2c_wait4bus (void)
+{
+ ulong timeval = get_timer (0);
+ while (readb(&I2C->sr) & I2C_SR_MBB) {
+ if (get_timer (timeval) > I2C_TIMEOUT) {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static __inline__ int
+i2c_wait (int write)
+{
+ u32 csr;
+ ulong timeval = get_timer(0);
+ do {
+ csr = readb(&I2C->sr);
+
+ if (!(csr & I2C_SR_MIF))
+ continue;
+
+ writeb(0x0, &I2C->sr);
+
+ if (csr & I2C_SR_MAL) {
+ debug("i2c_wait: MAL\n");
+ return -1;
+ }
+
+ if (!(csr & I2C_SR_MCF)) {
+ debug("i2c_wait: unfinished\n");
+ return -1;
+ }
+
+ if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
+ debug("i2c_wait: No RXACK\n");
+ return -1;
+ }
+
+ return 0;
+ } while (get_timer (timeval) < I2C_TIMEOUT);
+ debug("i2c_wait: timed out\n");
+}
+
+static __inline__ int
+i2c_write_addr (u8 dev, u8 dir, int rsta)
+{
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
+ (rsta?I2C_CR_RSTA:0),
+ &I2C->cr);
+
+ writeb((dev << 1) | dir, &I2C->dr);
+
+ if (i2c_wait (I2C_WRITE) < 0)
+ return 0;
+ return 1;
+}
+
+static __inline__ int
+__i2c_write (u8 *data, int length)
+{
+ int i;
+
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+ &I2C->cr);
+
+ for (i=0; i < length; i++) {
+ writeb(data[i], &I2C->dr);
+
+ if (i2c_wait (I2C_WRITE) < 0)
+ break;
+ }
+ return i;
+}
+
+static __inline__ int
+__i2c_read (u8 *data, int length)
+{
+ int i;
+
+ writeb(I2C_CR_MEN | I2C_CR_MSTA |
+ ((length == 1) ? I2C_CR_TXAK : 0),
+ &I2C->cr);
+
+ /* dummy read */
+ readb(&I2C->dr);
+
+ for (i=0; i < length; i++) {
+ if (i2c_wait (I2C_READ) < 0)
+ break;
+
+ /* Generate ack on last next to last byte */
+ if (i == length - 2)
+ writeb(I2C_CR_MEN | I2C_CR_MSTA |
+ I2C_CR_TXAK,
+ &I2C->cr);
+
+ /* Generate stop on last byte */
+ if (i == length - 1)
+ writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
+
+ data[i] = readb(&I2C->dr);
+ }
+ return i;
+}
+
+int
+i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ int i = 0;
+ u8 *a = (u8*)&addr;
+
+ if (i2c_wait4bus () < 0)
+ goto exit;
+
+ if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+ goto exit;
+
+ if (__i2c_write (&a[4 - alen], alen) != alen)
+ goto exit;
+
+ if (i2c_write_addr (dev, I2C_READ, 1) == 0)
+ goto exit;
+
+ i = __i2c_read (data, length);
+
+ exit:
+ writeb(I2C_CR_MEN, &I2C->cr);
+ return !(i == length);
+}
+
+int
+i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ int i = 0;
+ u8 *a = (u8*)&addr;
+
+ if (i2c_wait4bus () < 0)
+ goto exit;
+
+ if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
+ goto exit;
+
+ if (__i2c_write (&a[4 - alen], alen) != alen)
+ goto exit;
+
+ i = __i2c_write (data, length);
+
+ exit:
+ writeb(I2C_CR_MEN, &I2C->cr);
+ return !(i == length);
+}
+
+int i2c_probe (uchar chip)
+{
+ int tmp;
+
+ /*
+ * Try to read the first location of the chip. The underlying
+ * driver doesn't appear to support sending just the chip address
+ * and looking for an <ACK> back.
+ */
+ udelay(10000);
+ return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+}
+
+uchar i2c_reg_read (uchar i2c_addr, uchar reg)
+{
+ char buf[1];
+
+ i2c_read (i2c_addr, reg, 1, buf, 1);
+
+ return (buf[0]);
+}
+
+void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
+{
+ i2c_write (i2c_addr, reg, 1, &val, 1);
+}
+
+#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
new file mode 100644
index 0000000..53474f6
--- /dev/null
+++ b/cpu/mpc83xx/interrupts.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc83xx.h>
+#include <asm/processor.h>
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ return 0;
+}
+
+
+/*
+ * Handle external interrupts
+ */
+
+void external_interrupt (struct pt_regs *regs)
+{
+}
+
+
+/*
+ * Install and free an interrupt handler.
+ */
+
+void
+irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
+{
+}
+
+
+void irq_free_handler (int irq)
+{
+}
+
+
+void timer_interrupt_cpu (struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+
+/* ripped this out of ppc4xx/interrupts.c */
+
+/*
+ * irqinfo - print information about PCI devices
+ */
+
+void
+do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+}
+
+#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
new file mode 100644
index 0000000..d5fa811
--- /dev/null
+++ b/cpu/mpc83xx/pci.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+/*
+ * PCI Configuration space access support for MPC85xx PCI Bridge
+ */
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <pci.h>
+
+#ifdef CONFIG_MPC8349ADS
+#include <asm/i2c.h>
+#endif
+
+#if defined(CONFIG_PCI)
+
+void
+pci_mpc83xx_init(volatile struct pci_controller *hose)
+{
+ volatile immap_t * immr;
+ volatile clk8349_t * clk;
+ volatile law8349_t * pci_law;
+ volatile pot8349_t * pci_pot;
+ volatile pcictrl8349_t * pci_ctrl;
+ volatile pciconf8349_t * pci_conf;
+
+ u8 val8,tmp8,ret;
+ u16 reg16,tmp16;
+ u32 val32,tmp32;
+
+ immr = (immap_t *)CFG_IMMRBAR;
+ clk = (clk8349_t *)&immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+ */
+ val32 = clk->occr;
+ udelay(2000);
+ clk->occr = 0xff000000;
+ udelay(2000);
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);
+
+ /* mapped to PCI1 IO space 0x0 to local 0xe2000000 */
+ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
+
+ pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[3].pocmr = POCMR_EN | POCMR_DST | (POCMR_CM_512M & POCMR_CM_MASK);
+
+ /* mapped to PCI2 IO space 0x0 to local 0xe3000000 */
+ pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[4].pocmr = POCMR_EN | POCMR_DST | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G;
+
+ pci_ctrl[1].pitar1 = 0x0;
+ pci_ctrl[1].pibar1 = 0x0;
+ pci_ctrl[1].piebar1 = 0x0;
+ pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G;
+ /*
+ * Assign PIB PMC slot to desired PCI bus
+ */
+#ifdef CONFIG_MPC8349ADS
+ mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET);
+ i2c_init(CFG_I2C_SPEED,CFG_I2C_SLAVE);
+#endif
+ val8 = 0;
+ ret = i2c_write(0x23,0x6,1,&val8,1);
+ ret = i2c_write(0x23,0x7,1,&val8,1);
+ val8 = 0xff;
+ ret = i2c_write(0x23,0x2,1,&val8,1);
+ ret = i2c_write(0x23,0x3,1,&val8,1);
+
+ val8 = 0;
+ ret = i2c_write(0x26,0x6,1,&val8,1);
+ val8 = 0x34;
+ ret = i2c_write(0x26,0x7,1,&val8,1);
+#if defined(PCI_64BIT)
+ val8 = 0xf4; /* PMC2<->PCI1 64bit */
+#elif defined(PCI_ALL_PCI1)
+ val8 = 0xf3; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit */
+#elif defined(PCI_ONE_PCI1)
+ val8 = 0xf9; /* PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit */
+#elif defined(PCI_TWO_PCI1)
+ val8 = 0xf5; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit */
+#else
+ val8 = 0xf5;
+#endif
+ ret = i2c_write(0x26,0x2,1,&val8,1);
+ val8 = 0xff;
+ ret = i2c_write(0x26,0x3,1,&val8,1);
+ val8 = 0;
+ ret = i2c_write(0x27,0x6,1,&val8,1);
+ ret = i2c_write(0x27,0x7,1,&val8,1);
+ val8 = 0xff;
+ ret = i2c_write(0x27,0x2,1,&val8,1);
+ val8 = 0xef;
+ ret = i2c_write(0x27,0x3,1,&val8,1);
+ asm("eieio");
+
+ /*
+ * Release PCI RST Output signal
+ */
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+#ifndef PCI_64BIT
+ pci_ctrl[1].gcr = 1;
+#endif
+ udelay(2000);
+
+ hose[0].first_busno = 0;
+ hose[0].last_busno = 0xff;
+
+ pci_set_region(hose[0].regions + 0,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose[0].regions + 1,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose[0].region_count = 2;
+
+ pci_setup_indirect(&hose[0],
+ (CFG_IMMRBAR+0x8300),
+ (CFG_IMMRBAR+0x8304));
+#define PCI_CLASS_BRIDGE 0x06
+ reg16 = 0xff;
+ tmp32 = 0xffff;
+ pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
+
+ pci_hose_read_config_word (&hose[0],PCI_BDF(0,0,0),PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(&hose[0],PCI_BDF(0,0,0), PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(&hose[0],PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
+#ifndef PCI_64BIT
+ hose[1].first_busno = 0;
+ hose[1].last_busno = 0xff;
+
+ pci_set_region(hose[1].regions + 0,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose[1].regions + 1,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS,
+ CFG_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose[1].region_count = 2;
+
+ pci_setup_indirect(&hose[1],
+ (CFG_IMMRBAR+0x8380),
+ (CFG_IMMRBAR+0x8384));
+
+ pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE);
+ pci_hose_read_config_word (&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(&hose[1],PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
+#endif
+
+#if defined(PCI_64BIT)
+ printf("PCI1 64bit on PMC2\n");
+#elif defined(PCI_ALL_PCI1)
+ printf("PCI1 32bit on PMC1 & PMC2 & PMC3\n");
+#elif defined(PCI_ONE_PCI1)
+ printf("PCI1 32bit on PMC1,PCI2 32bit on PMC2 & PMC3\n");
+#else
+ printf("PCI1 32bit on PMC1 & PMC2 & PMC3 in default\n");
+#endif
+
+#if 1
+ /*
+ * Hose scan.
+ */
+ pci_register_hose(hose);
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+}
+
+#endif /* CONFIG_PCI */
diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S
new file mode 100644
index 0000000..3dfcd0d
--- /dev/null
+++ b/cpu/mpc83xx/resetvec.S
@@ -0,0 +1,6 @@
+ .section .resetvec,"ax"
+#ifndef FIXME
+#if 0
+ b _start_e500
+#endif
+#endif
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
new file mode 100644
index 0000000..63dcd66
--- /dev/null
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <spd.h>
+#include <asm/mmu.h>
+#include <spd_sdram.h>
+
+#ifdef CONFIG_SPD_EEPROM
+
+#if defined(CONFIG_DDR_ECC)
+extern void dma_init(void);
+extern uint dma_check(void);
+extern int dma_xfer(void *dest, uint count, void *src);
+#endif
+
+#ifndef CFG_READ_SPD
+#define CFG_READ_SPD i2c_read
+#endif
+
+/*
+ * Convert picoseconds into clock cycles (rounding up if needed).
+ */
+
+int
+picos_to_clk(int picos)
+{
+ int clks;
+
+ clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
+ if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
+ clks++;
+ }
+
+ return clks;
+}
+
+unsigned int
+banksize(unsigned char row_dens)
+{
+ return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
+}
+
+long int spd_sdram(int(read_spd)(uint addr))
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+ volatile ddr8349_t *ddr = &immap->ddr;
+ volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0];
+ spd_eeprom_t spd;
+ unsigned tmp, tmp1;
+ unsigned int memsize;
+ unsigned int law_size;
+ unsigned char caslat;
+ unsigned int trfc, trfc_clk, trfc_low;
+
+#warning Current spd_sdram does not fit its usage... adjust implementation or API...
+
+ CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
+
+ if (spd.nrows > 2) {
+ puts("DDR:Only two chip selects are supported on ADS.\n");
+ return 0;
+ }
+
+ if (spd.nrow_addr < 12
+ || spd.nrow_addr > 14
+ || spd.ncol_addr < 8
+ || spd.ncol_addr > 11) {
+ puts("DDR:Row or Col number unsupported.\n");
+ return 0;
+ }
+
+ ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+ ddr->cs_config[2] = ( 1 << 31
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("\n");
+ debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
+ debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
+
+ if (spd.nrows == 2) {
+ ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
+ | ((banksize(spd.row_dens) >> 23) - 1) );
+ ddr->cs_config[3] = ( 1<<31
+ | (spd.nrow_addr-12) << 8
+ | (spd.ncol_addr-8) );
+ debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
+ debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
+ }
+
+ if (spd.mem_type != 0x07) {
+ puts("No DDR module found!\n");
+ return 0;
+ }
+
+ /*
+ * Figure out memory size in Megabytes.
+ */
+ memsize = spd.nrows * banksize(spd.row_dens) / 0x100000;
+
+ /*
+ * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.
+ */
+ law_size = 19 + __ilog2(memsize);
+
+ /*
+ * Set up LAWBAR for all of DDR.
+ */
+ ecm->bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
+ debug("DDR:bar=0x%08x\n", ecm->bar);
+ debug("DDR:ar=0x%08x\n", ecm->ar);
+
+ /*
+ * find the largest CAS
+ */
+ if(spd.cas_lat & 0x40) {
+ caslat = 7;
+ } else if (spd.cas_lat & 0x20) {
+ caslat = 6;
+ } else if (spd.cas_lat & 0x10) {
+ caslat = 5;
+ } else if (spd.cas_lat & 0x08) {
+ caslat = 4;
+ } else if (spd.cas_lat & 0x04) {
+ caslat = 3;
+ } else if (spd.cas_lat & 0x02) {
+ caslat = 2;
+ } else if (spd.cas_lat & 0x01) {
+ caslat = 1;
+ } else {
+ puts("DDR:no valid CAS Latency information.\n");
+ return 0;
+ }
+
+ tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+ + (spd.clk_cycle & 0x0f));
+ debug("DDR:Module maximum data rate is: %dMhz\n", tmp);
+
+ tmp1 = get_bus_freq(0) / 1000000;
+ if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) {
+ /* 90~230 range, treated as DDR 200 */
+ if (spd.clk_cycle3 == 0xa0)
+ caslat -= 2;
+ else if(spd.clk_cycle2 == 0xa0)
+ caslat--;
+ } else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) {
+ /* 230-280 range, treated as DDR 266 */
+ if (spd.clk_cycle3 == 0x75)
+ caslat -= 2;
+ else if (spd.clk_cycle2 == 0x75)
+ caslat--;
+ } else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) {
+ /* 280~350 range, treated as DDR 333 */
+ if (spd.clk_cycle3 == 0x60)
+ caslat -= 2;
+ else if (spd.clk_cycle2 == 0x60)
+ caslat--;
+ } else if (tmp1 < 90 || tmp1 >= 350) {
+ /* DDR rate out-of-range */
+ puts("DDR:platform frequency is not fit for DDR rate\n");
+ return 0;
+ }
+
+ /*
+ * note: caslat must also be programmed into ddr->sdram_mode
+ * register.
+ *
+ * note: WRREC(Twr) and WRTORD(Twtr) are not in SPD,
+ * use conservative value here.
+ */
+ trfc = spd.trfc * 1000; /* up to ps */
+ trfc_clk = picos_to_clk(trfc);
+ trfc_low = (trfc_clk - 8) & 0xf;
+
+ ddr->timing_cfg_1 =
+ (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
+ ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
+ ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
+ ((caslat & 0x07) << 16 ) |
+ (trfc_low << 12 ) |
+ ( 0x300 ) |
+ ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
+
+ ddr->timing_cfg_2 = 0x00000800;
+
+ debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
+ debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
+
+ /*
+ * Only DDR I is supported
+ * DDR I and II have different mode-register-set definition
+ */
+
+ /* burst length is always 4 */
+ switch(caslat) {
+ case 2:
+ ddr->sdram_mode = 0x52; /* 1.5 */
+ break;
+ case 3:
+ ddr->sdram_mode = 0x22; /* 2.0 */
+ break;
+ case 4:
+ ddr->sdram_mode = 0x62; /* 2.5 */
+ break;
+ case 5:
+ ddr->sdram_mode = 0x32; /* 3.0 */
+ break;
+ default:
+ puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
+ return 0;
+ }
+ debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
+
+ switch(spd.refresh) {
+ case 0x00:
+ case 0x80:
+ tmp = picos_to_clk(15625000);
+ break;
+ case 0x01:
+ case 0x81:
+ tmp = picos_to_clk(3900000);
+ break;
+ case 0x02:
+ case 0x82:
+ tmp = picos_to_clk(7800000);
+ break;
+ case 0x03:
+ case 0x83:
+ tmp = picos_to_clk(31300000);
+ break;
+ case 0x04:
+ case 0x84:
+ tmp = picos_to_clk(62500000);
+ break;
+ case 0x05:
+ case 0x85:
+ tmp = picos_to_clk(125000000);
+ break;
+ default:
+ tmp = 0x512;
+ break;
+ }
+
+ /*
+ * Set BSTOPRE to 0x100 for page mode
+ * If auto-charge is used, set BSTOPRE = 0
+ */
+ ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
+ debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
+
+ /*
+ * Is this an ECC DDR chip?
+ */
+#if defined(CONFIG_DDR_ECC)
+ if (spd.config == 0x02) {
+ ddr->err_disable = 0x0000000d;
+ ddr->err_sbe = 0x00ff0000;
+ }
+ debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
+ debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
+#endif
+ asm("sync;isync");
+
+ udelay(500);
+
+ /*
+ * SS_EN=1,
+ * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
+ * clock cycle after address/command
+ */
+ ddr->sdram_clk_cntl = 0x82000000;
+
+ /*
+ * Figure out the settings for the sdram_cfg register. Build up
+ * the entire register in 'tmp' before writing since the write into
+ * the register will actually enable the memory controller, and all
+ * settings must be done before enabling.
+ *
+ * sdram_cfg[0] = 1 (ddr sdram logic enable)
+ * sdram_cfg[1] = 1 (self-refresh-enable)
+ * sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM)
+ */
+ tmp = 0xc2000000;
+
+ /*
+ * sdram_cfg[3] = RD_EN - registered DIMM enable
+ * A value of 0x26 indicates micron registered DIMMS (micron.com)
+ */
+ if (spd.mod_attr == 0x26) {
+ tmp |= 0x10000000;
+ }
+
+#if defined(CONFIG_DDR_ECC)
+ /*
+ * If the user wanted ECC (enabled via sdram_cfg[2])
+ */
+ if (spd.config == 0x02) {
+ tmp |= 0x20000000;
+ }
+#endif
+
+#if defined(CONFIG_DDR_2T_TIMING)
+ /*
+ * Enable 2T timing by setting sdram_cfg[16].
+ */
+ tmp |= SDRAM_CFG_2T_EN;
+#endif
+
+ ddr->sdram_cfg = tmp;
+ asm("sync;isync");
+ udelay(500);
+
+ debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
+
+ return memsize;/*in MBytes*/
+}
+#endif /* CONFIG_SPD_EEPROM */
+
+
+#if defined(CONFIG_DDR_ECC)
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+
+void
+ddr_enable_ecc(unsigned int dram_size)
+{
+#ifndef FIXME
+ uint *p = 0;
+ uint i = 0;
+ volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+ volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+
+ dma_init();
+
+ for (*p = 0; p < (uint *)(8 * 1024); p++) {
+ if (((unsigned int)p & 0x1f) == 0) {
+ ppcDcbz((unsigned long) p);
+ }
+ *p = (unsigned int)0xdeadbeef;
+ if (((unsigned int)p & 0x1c) == 0x1c) {
+ ppcDcbf((unsigned long) p);
+ }
+ }
+
+ /* 8K */
+ dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
+ /* 16K */
+ dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
+ /* 32K */
+ dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
+ /* 64K */
+ dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
+ /* 128k */
+ dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
+ /* 256k */
+ dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
+ /* 512k */
+ dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
+ /* 1M */
+ dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
+ /* 2M */
+ dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
+ /* 4M */
+ dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+
+ for (i = 1; i < dram_size / 0x800000; i++) {
+ dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
+ }
+
+ /*
+ * Enable errors for ECC.
+ */
+ ddr->err_disable = 0x00000000;
+ asm("sync;isync");
+#endif
+}
+
+#endif /* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
new file mode 100644
index 0000000..260137d
--- /dev/null
+++ b/cpu/mpc83xx/speed.c
@@ -0,0 +1,421 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <asm/processor.h>
+
+/* ----------------------------------------------------------------- */
+
+typedef enum {
+ _unk,
+ _off,
+ _byp,
+ _x8,
+ _x4,
+ _x2,
+ _x1,
+ _1x,
+ _1_5x,
+ _2x,
+ _2_5x,
+ _3x
+} mult_t;
+
+typedef struct {
+ mult_t core_csb_ratio;
+ mult_t vco_divider;
+} corecnf_t;
+
+corecnf_t corecnf_tab[] = {
+ { _byp, _byp}, /* 0x00 */
+ { _byp, _byp}, /* 0x01 */
+ { _byp, _byp}, /* 0x02 */
+ { _byp, _byp}, /* 0x03 */
+ { _byp, _byp}, /* 0x04 */
+ { _byp, _byp}, /* 0x05 */
+ { _byp, _byp}, /* 0x06 */
+ { _byp, _byp}, /* 0x07 */
+ { _1x, _x2}, /* 0x08 */
+ { _1x, _x4}, /* 0x09 */
+ { _1x, _x8}, /* 0x0A */
+ { _1x, _x8}, /* 0x0B */
+ {_1_5x, _x2}, /* 0x0C */
+ {_1_5x, _x4}, /* 0x0D */
+ {_1_5x, _x8}, /* 0x0E */
+ {_1_5x, _x8}, /* 0x0F */
+ { _2x, _x2}, /* 0x10 */
+ { _2x, _x4}, /* 0x11 */
+ { _2x, _x8}, /* 0x12 */
+ { _2x, _x8}, /* 0x13 */
+ {_2_5x, _x2}, /* 0x14 */
+ {_2_5x, _x4}, /* 0x15 */
+ {_2_5x, _x8}, /* 0x16 */
+ {_2_5x, _x8}, /* 0x17 */
+ { _3x, _x2}, /* 0x18 */
+ { _3x, _x4}, /* 0x19 */
+ { _3x, _x8}, /* 0x1A */
+ { _3x, _x8}, /* 0x1B */
+};
+
+/* ----------------------------------------------------------------- */
+
+/*
+ *
+ */
+int get_clocks (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ u32 pci_sync_in;
+ u8 spmf;
+ u8 clkin_div;
+ u32 sccr;
+ u32 corecnf_tab_index;
+ u8 corepll;
+ u32 lcrr;
+
+ u32 csb_clk;
+ u32 tsec1_clk;
+ u32 tsec2_clk;
+ u32 core_clk;
+ u32 usbmph_clk;
+ u32 usbdr_clk;
+ u32 i2c_clk;
+ u32 enc_clk;
+ u32 lbiu_clk;
+ u32 lclk_clk;
+ u32 ddr_clk;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+#ifndef CFG_HRCW_HIGH
+# error "CFG_HRCW_HIGH must be defined in include/configs/MCP83XXADS.h"
+#endif /* CFG_HCWD_HIGH */
+
+#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST)
+# ifndef CONFIG_83XX_CLKIN
+# error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in include/configs/MCP83XXADS.h"
+# endif /* CONFIG_83XX_CLKIN */
+# ifdef CONFIG_83XX_PCICLK
+# warning "In PCI Host Mode, CONFIG_83XX_PCICLK in include/configs/MCP83XXADS.h is igonred."
+# endif /* CONFIG_83XX_PCICLK */
+/* PCI Host Mode */
+ if (!(im->reset.rcwh & RCWH_PCIHOST)) {
+ /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH the im->reset.rcwhr PCI Host Mode is disabled */
+ /* FIXME: findout if there is a way to issue some warning */
+ return -2;
+ }
+ if (im->clk.spmr & SPMR_CKID) {
+ pci_sync_in = CONFIG_83XX_CLKIN / 2; /* PCI Clock is half CONFIG_83XX_CLKIN */
+ }
+ else {
+ pci_sync_in = CONFIG_83XX_CLKIN;
+ }
+#else
+# ifdef CONFIG_83XX_CLKIN
+# warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in include/configs/MCP83XXADS.h is igonred."
+# endif /* CONFIG_83XX_CLKIN */
+# ifndef CONFIG_83XX_PCICLK
+# error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in include/configs/MCP83XXADS.h"
+# endif /* CONFIG_83XX_PCICLK */
+/* PCI Agent Mode */
+ if (im->reset.rcwh & RCWH_PCIHOST) {
+ /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH the im->reset.rcwhr PCI Host Mode is enabled */
+ return -3;
+ }
+ pci_sync_in = CONFIG_83XX_PCICLK;
+#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
+
+ /* we have up to date pci_sync_in */
+ spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
+ clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
+
+ if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
+ csb_clk = (pci_sync_in * spmf * (1 + clkin_div)) / 2;
+ }
+ else {
+ csb_clk = pci_sync_in * spmf * (1 + clkin_div);
+ }
+
+ sccr = im->clk.sccr;
+ switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
+ case 0:
+ tsec1_clk = 0;
+ break;
+ case 1:
+ tsec1_clk = csb_clk;
+ break;
+ case 2:
+ tsec1_clk = csb_clk / 2;
+ break;
+ case 3:
+ tsec1_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TSEC1CM value */
+ return -4;
+ }
+
+ switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
+ case 0:
+ tsec2_clk = 0;
+ break;
+ case 1:
+ tsec2_clk = csb_clk;
+ break;
+ case 2:
+ tsec2_clk = csb_clk / 2;
+ break;
+ case 3:
+ tsec2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TSEC2CM value */
+ return -5;
+ }
+ i2c_clk = tsec2_clk;
+
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -6;
+ }
+
+ switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
+ case 0:
+ usbmph_clk = 0;
+ break;
+ case 1:
+ usbmph_clk = csb_clk;
+ break;
+ case 2:
+ usbmph_clk = csb_clk / 2;
+ break;
+ case 3:
+ usbmph_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_USBMPHCM value */
+ return -7;
+ }
+
+ switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
+ case 0:
+ usbdr_clk = 0;
+ break;
+ case 1:
+ usbdr_clk = csb_clk;
+ break;
+ case 2:
+ usbdr_clk = csb_clk / 2;
+ break;
+ case 3:
+ usbdr_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_USBDRCM value */
+ return -8;
+ }
+
+ if (usbmph_clk != 0
+ && usbdr_clk != 0
+ && usbmph_clk != usbdr_clk ) {
+ /* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
+ return -9;
+ }
+
+ lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+ lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+ switch (lcrr) {
+ case 2:
+ case 4:
+ case 8:
+ lclk_clk = lbiu_clk / lcrr;
+ break;
+ default:
+ /* unknown lcrr */
+ return -10;
+ }
+
+ ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
+
+ corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
+ corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
+ if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
+ /* corecnf_tab_index is too high, possibly worng value */
+ return -11;
+ }
+ switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
+ case _byp:
+ case _x1:
+ case _1x:
+ core_clk = csb_clk;
+ break;
+ case _1_5x:
+ core_clk = (3 * csb_clk) / 2;
+ break;
+ case _2x:
+ core_clk = 2 * csb_clk;
+ break;
+ case _2_5x:
+ core_clk = ( 5 * csb_clk) / 2;
+ break;
+ case _3x:
+ core_clk = 3 * csb_clk;
+ break;
+ default:
+ /* unkown core to csb ratio */
+ return -12;
+ }
+
+ gd->csb_clk = csb_clk ;
+ gd->tsec1_clk = tsec1_clk ;
+ gd->tsec2_clk = tsec2_clk ;
+ gd->core_clk = core_clk ;
+ gd->usbmph_clk = usbmph_clk;
+ gd->usbdr_clk = usbdr_clk ;
+ gd->i2c_clk = i2c_clk ;
+ gd->enc_clk = enc_clk ;
+ gd->lbiu_clk = lbiu_clk ;
+ gd->lclk_clk = lclk_clk ;
+ gd->ddr_clk = ddr_clk ;
+
+ gd->cpu_clk = gd->core_clk;
+ gd->bus_clk = gd->lbiu_clk;
+ return 0;
+}
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ return gd->csb_clk;
+}
+
+int print_clock_conf (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ printf("Clock configuration:\n");
+ printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
+ printf(" Core: %4d MHz\n",gd->core_clk/1000000);
+ printf(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
+ printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000);
+ printf(" DDR: %4d MHz\n",gd->ddr_clk/1000000);
+ printf(" I2C: %4d MHz\n",gd->i2c_clk/1000000);
+ printf(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000);
+ printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
+ printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
+ printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
+
+#if 0
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ ulong sccr, dfbrg;
+ ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf;
+ corecnf_t *cp;
+
+ sccr = immap->im_clkrst.car_sccr;
+ dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
+
+ scmr = immap->im_clkrst.car_scmr;
+ corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
+ busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
+ cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
+ plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
+ pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+
+ cp = &corecnf_tab[corecnf];
+
+ puts (CPU_ID_STR " Clock Configuration\n - Bus-to-Core Mult ");
+
+ switch (cp->b2c_mult) {
+ case _byp:
+ puts ("BYPASS");
+ break;
+
+ case _off:
+ puts ("OFF");
+ break;
+
+ case _unk:
+ puts ("UNKNOWN");
+ break;
+
+ default:
+ printf ("%d%sx",
+ cp->b2c_mult / 2,
+ (cp->b2c_mult % 2) ? ".5" : "");
+ break;
+ }
+
+ printf (", VCO Div %d, 60x Bus Freq %s, Core Freq %s\n",
+ cp->vco_div, cp->freq_60x, cp->freq_core);
+
+ printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, "
+ "plldf %ld, pllmf %ld\n", dfbrg, corecnf, busdf, cpmdf, plldf,
+ pllmf);
+
+ printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
+ gd->vco_out, gd->scc_clk, gd->brg_clk);
+
+ printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
+ gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
+
+ if (sccr & SCCR_PCI_MODE) {
+ uint pci_div;
+
+ pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
+ ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+
+ printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div);
+ }
+ putc ('\n');
+#endif
+ return 0;
+}
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
new file mode 100644
index 0000000..fb001a6
--- /dev/null
+++ b/cpu/mpc83xx/start.S
@@ -0,0 +1,1093 @@
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
+ */
+
+#include <config.h>
+#include <mpc83xx.h>
+#include <version.h>
+
+#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING "MPC83XX"
+#endif
+
+/* We don't want the MMU yet.
+ */
+#undef MSR_KERNEL
+
+/*
+ * Floating Point enable, Machine Check and Recoverable Interr.
+ */
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r14 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * Version string - must be in data segment because MPC83xx uses the
+ * first 256 bytes for the Hard Reset Configuration Word table (see
+ * below). Similarly, can't have the U-Boot Magic Number as the first
+ * thing in the image - don't know how this will affect the image tools,
+ * but I guess I'll find out soon.
+ */
+ .data
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii " ", CONFIG_IDENT_STRING, "\0"
+
+ .text
+#define _HRCW_TABLE_ENTRY(w) \
+ .fill 8,1,(((w)>>24)&0xff); \
+ .fill 8,1,(((w)>>16)&0xff); \
+ .fill 8,1,(((w)>> 8)&0xff); \
+ .fill 8,1,(((w) )&0xff)
+
+ _HRCW_TABLE_ENTRY(CFG_HRCW_LOW)
+ _HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
+
+
+#ifndef CONFIG_DEFAULT_IMMR
+#error CONFIG_DEFAULT_IMMR must be defined
+#endif /* CFG_DEFAULT_IMMR */
+#ifndef CFG_IMMRBAR
+#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
+#endif /* CFG_IMMRBAR */
+
+/*
+ * After configuration, a system reset exception is executed using the
+ * vector at offset 0x100 relative to the base set by MSR[IP]. If
+ * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
+ * base address is 0xfff00000. In the case of a Power On Reset or Hard
+ * Reset, the value of MSR[IP] is determined by the CIP field in the
+ * HRCW.
+ *
+ * Other bits in the HRCW set up the Base Address and Port Size in BR0.
+ * This determines the location of the boot ROM (flash or EPROM) in the
+ * processor's address space at boot time. As long as the HRCW is set up
+ * so that we eventually end up executing the code below when the
+ * processor executes the reset exception, the actual values used should
+ * not matter.
+ *
+ * Once we have got here, the address mask in OR0 is cleared so that the
+ * bottom 32K of the boot ROM is effectively repeated all throughout the
+ * processor's address space, after which we can jump to the absolute
+ * address at which the boot ROM was linked at compile time, and proceed
+ * to initialise the memory controller without worrying if the rug will
+ * be pulled out from under us, so to speak (it will be fine as long as
+ * we configure BR0 with the same boot ROM link address).
+ */
+ . = EXC_OFF_SYS_RESET
+
+ .globl _start
+_start: /* time t 0 */
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
+ nop
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+
+boot_cold: /* time t 3 */
+ lis r4, CONFIG_DEFAULT_IMMR@h
+ nop
+boot_warm: /* time t 5 */
+ mfmsr r5 /* save msr contents */
+ lis r3, CFG_IMMRBAR@h
+ ori r3, r3, CFG_IMMRBAR@l
+ stw r3, IMMRBAR(r4)
+
+ /* Initialise the E300 processor core */
+ /*------------------------------------------*/
+
+ bl init_e300_core
+
+#ifndef CFG_RAMBOOT
+
+ /* Inflate flash location so it appears everywhere, calculate */
+ /* the absolute address in final location of the FLASH, jump */
+ /* there and deflate the flash size back to minimal size */
+ /*------------------------------------------------------------*/
+ bl map_flash_by_law1
+ lis r4, (CFG_MONITOR_BASE)@h
+ ori r4, r4, (CFG_MONITOR_BASE)@l
+ addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r5
+ blr
+in_flash:
+#if 1 /* Remapping flash with LAW0. */
+ bl remap_flash_by_law0
+#endif
+#endif /* CFG_RAMBOOT */
+
+ bl setup_stack_in_data_cache_on_r1
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable & stack humble */
+ /*------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ lis r3, CFG_IMMRBAR@h
+ /* run low-level CPU init code (in Flash)*/
+ bl cpu_init_f
+
+ /* r3: BOOTFLAG */
+ mr r3, r21
+ /* run 1st part of board init code (in Flash)*/
+ bl board_init_f
+
+/*
+ * Vector Table
+ */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+#ifndef FIXME
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+#endif
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_Alignment:
+ .long AlignmentException - _start + EXC_OFF_SYS_RESET
+ .long int_return - _start + EXC_OFF_SYS_RESET
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_ProgramCheck:
+ .long ProgramCheckException - _start + EXC_OFF_SYS_RESET
+ .long int_return - _start + EXC_OFF_SYS_RESET
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+#ifdef DEBUG
+ . = 0x1300
+ /*
+ * This exception occurs when the program counter matches the
+ * Instruction Address Breakpoint Register (IABR).
+ *
+ * I want the cpu to halt if this occurs so I can hunt around
+ * with the debugger and look at things.
+ *
+ * When DEBUG is defined, both machine check enable (in the MSR)
+ * and checkstop reset enable (in the reset mode register) are
+ * turned off and so a checkstop condition will result in the cpu
+ * halting.
+ *
+ * I force the cpu into a checkstop condition by putting an illegal
+ * instruction here (at least this is the theory).
+ *
+ * well - that didnt work, so just do an infinite loop!
+ */
+1: b 1b
+#else
+ STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
+#endif
+ STD_EXCEPTION(0x1400, SMI, UnknownException)
+
+ STD_EXCEPTION(0x1500, Trap_15, UnknownException)
+ STD_EXCEPTION(0x1600, Trap_16, UnknownException)
+ STD_EXCEPTION(0x1700, Trap_17, UnknownException)
+ STD_EXCEPTION(0x1800, Trap_18, UnknownException)
+ STD_EXCEPTION(0x1900, Trap_19, UnknownException)
+ STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
+ STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
+ STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
+ STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
+ STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
+ STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
+ STD_EXCEPTION(0x2000, Trap_20, UnknownException)
+ STD_EXCEPTION(0x2100, Trap_21, UnknownException)
+ STD_EXCEPTION(0x2200, Trap_22, UnknownException)
+ STD_EXCEPTION(0x2300, Trap_23, UnknownException)
+ STD_EXCEPTION(0x2400, Trap_24, UnknownException)
+ STD_EXCEPTION(0x2500, Trap_25, UnknownException)
+ STD_EXCEPTION(0x2600, Trap_26, UnknownException)
+ STD_EXCEPTION(0x2700, Trap_27, UnknownException)
+ STD_EXCEPTION(0x2800, Trap_28, UnknownException)
+ STD_EXCEPTION(0x2900, Trap_29, UnknownException)
+ STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
+ STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
+ STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
+ STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
+ STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
+ STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/*
+ * This code initialises the E300 processor core
+ * (conforms to PowerPC 603e spec)
+ * Note: expects original MSR contents to be in r5.
+ */
+ .globl init_e300_core
+init_e300_core: /* time t 10 */
+ /* Initialize machine status; enable machine check interrupt */
+ /*-----------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
+#endif
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+
+ lis r3, CFG_IMMRBAR@h
+#if defined(CONFIG_WATCHDOG)
+ /* Initialise the Wathcdog values and reset it (if req) */
+ /*------------------------------------------------------*/
+ lis r4, CFG_WATCHDOG_VALUE
+ ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+ stw r4, SWCRR(r3)
+
+ /* and reset it */
+
+ li r4, 0x556C
+ sth r4, SWSRR@l(r3)
+ li r4, 0xAA39
+ sth r4, SWSRR@l(r3)
+#else
+ /* Disable Wathcdog */
+ /*-------------------*/
+ xor r4, r4, r4
+ stw r4, SWCRR(r3)
+#endif /* CONFIG_WATCHDOG */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /*------------------------------------------------------*/
+
+ lis r3, CFG_HID0_INIT@h
+ ori r3, r3, CFG_HID0_INIT@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CFG_HID0_FINAL@h
+ ori r3, r3, CFG_HID0_FINAL@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CFG_HID2@h
+ ori r3, r3, CFG_HID2@l
+ SYNC
+ mtspr HID2, r3
+
+ /* clear all BAT's */
+ /*----------------------------------*/
+
+ xor r0, r0, r0
+ mtspr DBAT0U, r0
+ mtspr DBAT0L, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT1L, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT2L, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT3L, r0
+ mtspr IBAT0U, r0
+ mtspr IBAT0L, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT1L, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT2L, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT3L, r0
+ SYNC
+
+ /* invalidate all tlb's
+ *
+ * From the 603e User Manual: "The 603e provides the ability to
+ * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
+ * instruction invalidates the TLB entry indexed by the EA, and
+ * operates on both the instruction and data TLBs simultaneously
+ * invalidating four TLB entries (both sets in each TLB). The
+ * index corresponds to bits 15-19 of the EA. To invalidate all
+ * entries within both TLBs, 32 tlbie instructions should be
+ * issued, incrementing this field by one each time."
+ *
+ * "Note that the tlbia instruction is not implemented on the
+ * 603e."
+ *
+ * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
+ * incrementing by 0x1000 each time. The code below is sort of
+ * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
+ *
+ */
+
+ li r3, 32
+ mtctr r3
+ li r3, 0
+1: tlbie r3
+ addi r3, r3, 0x1000
+ bdnz 1b
+ SYNC
+
+ /* Done! */
+ /*------------------------------*/
+ blr
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICE
+ lis r4, 0
+ ori r4, r4, HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ICE|HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock*/
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_ICE_SHIFT, 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ENABLE_DATA_CACHE
+ lis r4, 0
+ ori r4, r4, HID0_LOCK_DATA_CACHE
+ andc r3, r3, r4
+ ori r4, r3, HID0_LOCK_INSTRUCTION_CACHE
+ sync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ENABLE_DATA_CACHE|HID0_LOCK_DATA_CACHE
+ andc r3, r3, r4
+ ori r4, r3, HID0_INVALIDATE_DATA_CACHE
+ sync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_DCE_SHIFT, 31, 31
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*-------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ mr r3, r5 /* Destination Address */
+ lis r4, CFG_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CFG_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE)
+ * + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r14, r14, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* copy */
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+
+ addi r0,r5,3
+ srwi. r0,r0,2
+ mtctr r0
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* and compare */
+20: lwzu r20,4(r8)
+ lwzu r21,4(r7)
+ xor. r22, r20, r21
+ bne 30f
+ bdnz 20b
+ b 4f
+
+ /* compare failed */
+30: li r3, 0
+ blr
+
+2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4:
+ bl un_setup_stack_in_data_cache
+ mr r7, r3
+ mr r8, r4
+ bl dcache_disable
+ mr r3, r7
+ mr r4, r8
+
+ cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mfspr r7,HID0 /* don't do dcbst if dcache is disabled*/
+ rlwinm r7,r7,HID0_DCE_SHIFT,31,31
+ cmpwi r7,0
+ beq 9f
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
+ rlwinm r7,r7,HID0_DCE_SHIFT,31,31
+ cmpwi r7,0
+ beq 7f
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r14 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ add r0,r0,r11
+ stw r0,0(r3)
+ bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+2: li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+#if defined(CONFIG_HYMOD)
+ /*
+ * For HYMOD - the environment is the very last item in flash.
+ * The real .bss stops just before environment starts, so only
+ * clear up to that point.
+ *
+ * taken from mods for FADS board
+ */
+ lwz r4,GOT(environment)
+#else
+ lwz r4,GOT(_end)
+#endif
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+
+ mflr r4 /* save link register */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
+
+ /*
+ * Function: relocate entries for one exception vector
+ */
+trap_reloc:
+ lwz r0, 0(r7) /* hdlr ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 0(r7)
+
+ lwz r0, 4(r7) /* int_return ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 4(r7)
+
+ blr
+
+#ifdef CFG_INIT_RAM_LOCK
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3, (CFG_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
+ li r2,512
+ mtctr r2
+1: icbi r0, r3
+ dcbi r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+ sync /* Wait for all icbi to complete on bus */
+ isync
+ blr
+#endif
+
+map_flash_by_law1:
+ /* When booting from ROM (Flash or EPROM), clear the */
+ /* Address Mask in OR0 so ROM appears everywhere */
+ /*----------------------------------------------------*/
+ lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
+ lwz r4, OR0@l(r3)
+ li r5, 0x7fff /* r5 <= 0x00007FFFF */
+ and r4, r4, r5
+ stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
+
+ /* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
+ * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
+ * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
+ * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
+ * 0xFF800. From the hard resetting to here, the processor fetched and
+ * executed the instructions one by one. There is not absolutely
+ * jumping happened. Laterly, the u-boot code has to do an absolutely
+ * jumping to tell the CPU instruction fetching component what the
+ * u-boot TEXT base address is. Because the TEXT base resides in the
+ * boot ROM memory space, to garantee the code can run smoothly after
+ * that jumping, we must map in the entire boot ROM by Local Access
+ * Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
+ * address for boot ROM, such as 0xFE000000. In this case, the default
+ * LBIU Local Access Widow 0 will not cover this memory space. So, we
+ * need another window to map in it.
+ */
+ lis r4, (CFG_FLASH_BASE)@h
+ ori r4, r4, (CFG_FLASH_BASE)@l
+ stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
+ lis r4, (0x80000016)@h
+ ori r4, r4, (0x80000016)@l
+ stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
+ blr
+
+ /* Though all the LBIU Local Access Windows and LBC Banks will be
+ * initialized in the C code, we'd better configure boot ROM's
+ * window 0 and bank 0 correctly at here.
+ */
+remap_flash_by_law0:
+ /* Initialize the BR0 with the boot ROM starting address. */
+ lwz r4, BR0(r3)
+ li r5, 0x7FFF
+ and r4, r4, r5
+ lis r5, (CFG_FLASH_BASE & 0xFFFF8000)@h
+ ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
+ or r5, r5, r4
+ stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
+
+ lwz r4, OR0(r3)
+ lis r5, 0xFF80 /* 8M */
+ or r4, r4, r5
+ stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
+
+ lis r4, (CFG_FLASH_BASE)@h
+ ori r4, r4, (CFG_FLASH_BASE)@l
+ stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
+
+ lis r4, (0x80000016)@h
+ ori r4, r4, (0x80000016)@l
+ stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
+
+ xor r4, r4, r4
+ stw r4, LBLAWBAR1(r3)
+ stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
+ blr
+
+setup_stack_in_data_cache_on_r1:
+ lis r3, (CFG_IMMRBAR)@h
+
+ /* setup D-BAT for the D-Cache (with out real memory backup) */
+
+ lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
+ mtspr DBAT0U, r4
+ ori r4, r4, 0x0002
+ mtspr DBAT0L, r4
+ isync
+
+#if 0
+ /* Enable MMU */
+ mfmsr r4
+ ori r4, r4, (MSR_DR | MSR_IR)@l
+ mtmsr r4
+#endif
+
+ /* Enable and invalidate data cache. */
+ mfspr r4, HID0
+ mr r5, r4
+ ori r4, r4, HID0_DCE | HID0_DCI
+ ori r5, r5, HID0_DCE
+ sync
+ mtspr HID0, r4
+ mtspr HID0, r5
+ sync
+
+ /* Allocate Initial RAM in data cache.*/
+ li r0, 0
+ lis r4, (CFG_INIT_RAM_ADDR)@h
+ ori r4, r4, (CFG_INIT_RAM_ADDR)@l
+ li r5, 128*8 /* 128*8*32=32Kb */
+ mtctr r5
+1:
+ dcbz r0, r4
+ addi r4, r4, 32
+ bdnz 1b
+ isync
+
+ /* Lock all the D-cache, basically leaving the reset of the program without dcache */
+ mfspr r4, HID0
+ ori r4, r4, (HID0_DLOCK)@l
+ sync
+ mtspr HID0 , r4
+
+ /* setup the stack pointer in r1 */
+ lis r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+ li r0, 0 /* Make room for stack frame header and */
+
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ blr
+
+un_setup_stack_in_data_cache:
+ blr
+ mr r14, r4
+ mr r15, r5
+
+
+ lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
+ mtspr DBAT0U, r4
+ ori r4, r4, 0x0002
+ mtspr DBAT0L, r4
+ isync
+
+ /* un lock all the D-cache */
+ mfspr r4, HID0
+ lis r5, (~(HID0_DLOCK))@h
+ ori r5, r5, (~(HID0_DLOCK))@l
+ and r4, r4, r5
+ sync
+ mtspr HID0 , r4
+
+ /* Re - Allocate Initial RAM in data cache.*/
+ li r0, 0
+ lis r4, (CFG_INIT_RAM_ADDR)@h
+ ori r4, r4, (CFG_INIT_RAM_ADDR)@l
+ li r5, 128*8 /* 128*8*32=32Kb */
+ mtctr r5
+1:
+ dcbz r0, r4
+ addi r4, r4, 32
+ bdnz 1b
+ isync
+
+ mflr r16
+ bl dcache_disable
+ mtlr r16
+
+ blr
+
+#if 0
+#define GREEN_LIGHT 0x2B0D4046
+#define RED_LIGHT 0x250D4046
+#define LIB_CNT 0x4FFF
+
+/*
+ * Lib Light
+ */
+
+ .globl liblight
+liblight:
+ lis r3, CFG_IMMRBAR@h
+ ori r3, r3, CFG_IMMRBAR@l
+ li r4, 0x3002
+ mtmsr r4
+ xor r4, r4, r4
+ mtspr HID0, r4
+ mtspr HID2, r4
+ lis r4, 0xF8000000@h
+ ori r4, r4, 0xF8000000@l
+ stw r4, LBLAWBAR1(r3)
+ lis r4, 0x8000000E@h
+ ori r4, r4, 0x8000000E@l
+ stw r4, LBLAWAR1(r3)
+ lis r4, 0xF8000801@h
+ ori r4, r4, 0xF8000801@l
+ stw r4, BR1(r3)
+ lis r4, 0xFFFFE8f0@h
+ ori r4, r4, 0xFFFFE8f0@l
+ stw r4, OR1(r3)
+
+ lis r4, 0xF8000000@h
+ ori r4, r4, 0xF8000000@l
+ lis r5, GREEN_LIGHT@h
+ ori r5, r5, GREEN_LIGHT@l
+ lis r6, RED_LIGHT@h
+ ori r6, r6, RED_LIGHT@l
+ lis r7, LIB_CNT@h
+ ori r7, r7, LIB_CNT@l
+
+1:
+ stw r5, 0(r4)
+ mtctr r7
+2: bdnz 2b
+ stw r6, 0(r4)
+ mtctr r7
+3: bdnz 3b
+ b 1b
+
+#endif
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
new file mode 100644
index 0000000..c7a5638
--- /dev/null
+++ b/cpu/mpc83xx/traps.c
@@ -0,0 +1,274 @@
+/*
+ * linux/arch/ppc/kernel/traps.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Change log:
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * 20050101: Eran Liberty (liberty@freescale.com)
+ * Initial file creating (porting from 85XX & 8260)
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware
+ * exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/mpc8349_pci.h>
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int cnt = 0;
+ unsigned long i;
+
+ puts ("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ putc ('\n');
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ putc ('\n');
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ putc ('\n');
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ putc ('\n');
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+#ifdef CONFIG_PCI
+void dump_pci (void)
+{
+/*
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ printf ("PCI: err status %x err mask %x err ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_esr),
+ le32_to_cpu (immap->im_pci.pci_emr),
+ le32_to_cpu (immap->im_pci.pci_ecr));
+ printf (" error address %x error data %x ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_eacr),
+ le32_to_cpu (immap->im_pci.pci_edcr),
+ le32_to_cpu (immap->im_pci.pci_eccr));
+*/
+}
+#endif
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup;
+
+ /* Probing PCI using config cycles cause this exception
+ * when a device is not present. Catch it and return to
+ * the PCI exception handler.
+ */
+#ifdef CONFIG_PCI
+#if 0
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#ifdef DEBUG
+ dump_pci();
+#endif
+ /* clear the error in the error status register */
+ if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
+ immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
+ return;
+ }
+#endif
+#endif /* CONFIG_PCI */
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ return;
+ }
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ puts ("Machine check in kernel mode.\n"
+ "Caused by (from msr): ");
+ printf("regs %p ",regs);
+ switch( regs->msr & 0x000F0000) {
+ case (0x80000000>>12):
+ puts ("Machine check signal - probably due to mm fault\n"
+ "with mmu off\n");
+ break;
+ case (0x80000000>>13):
+ puts ("Transfer error ack signal\n");
+ break;
+ case (0x80000000>>14):
+ puts ("Data parity signal\n");
+ break;
+ case (0x80000000>>15):
+ puts ("Address parity signal\n");
+ break;
+ default:
+ puts ("Unknown values in msr\n");
+ }
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+#ifdef CONFIG_PCI
+ dump_pci();
+#endif
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 996915e..5298dc1 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.o resetvec.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tsec.o \
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
OBJS = $(COBJS)
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
index df11052..aa8a5a5 100644
--- a/cpu/mpc85xx/commproc.c
+++ b/cpu/mpc85xx/commproc.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <asm/cpm_85xx.h>
-#if defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
/*
* because we have stack and init data in dual port ram
* we must reduce the size
@@ -211,4 +211,4 @@ ulong post_word_load (void)
#endif /* CONFIG_POST */
-#endif /* CONFIG_MPC8560 */
+#endif /* CONFIG_CPM2 */
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 4a1ccb0..f7fe22e 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -38,6 +38,7 @@ int checkcpu (void)
uint lcrr; /* local bus clock ratio register */
uint clkdiv; /* clock divider portion of lcrr */
uint pvr, svr;
+ uint fam;
uint ver;
uint major, minor;
@@ -60,6 +61,12 @@ int checkcpu (void)
case SVR_8560:
puts("8560");
break;
+ case SVR_8548:
+ puts("8548");
+ break;
+ case SVR_8548_E:
+ puts("8548_E");
+ break;
default:
puts("Unknown");
break;
@@ -67,13 +74,14 @@ int checkcpu (void)
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
pvr = get_pvr();
+ fam = PVR_FAM(pvr);
ver = PVR_VER(pvr);
major = PVR_MAJ(pvr);
minor = PVR_MIN(pvr);
printf("Core: ");
- switch (ver) {
- case PVR_VER(PVR_85xx):
+ switch (fam) {
+ case PVR_FAM(PVR_85xx):
puts("E500");
break;
default:
@@ -84,7 +92,7 @@ int checkcpu (void)
get_sys_info(&sysinfo);
- puts("Clocks Configuration:\n");
+ puts("Clock Configuration:\n");
printf(" CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
printf("CCB:%4lu MHz,\n", sysinfo.freqSystemBus / 1000000);
printf(" DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
@@ -101,6 +109,13 @@ int checkcpu (void)
#endif
clkdiv = lcrr & 0x0f;
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
+#ifdef CONFIG_MPC8548
+ /*
+ * Yes, the entire PQ38 family use the same
+ * bit-representation for twice the clock divider values.
+ */
+ clkdiv *= 2;
+#endif
printf("LBC:%4lu MHz\n",
sysinfo.freqSystemBus / 1000000 / clkdiv);
} else {
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index ee2f79f..efde9cc 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -30,7 +30,7 @@
#include <ioports.h>
#include <asm/io.h>
-#ifdef CONFIG_MPC8560
+#ifdef CONFIG_CPM2
static void config_8560_ioports (volatile immap_t * immr)
{
int portnum;
@@ -115,7 +115,7 @@ void cpu_init_f (void)
memset ((void *) gd, 0, sizeof (gd_t));
-#ifdef CONFIG_MPC8560
+#ifdef CONFIG_CPM2
config_8560_ioports(immap);
#endif
@@ -173,32 +173,63 @@ void cpu_init_f (void)
memctl->br7 = CFG_BR7_PRELIM;
#endif
-#if defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
m8560_cpm_reset();
#endif
}
+
/*
- * We initialize L2 as cache here.
+ * Initialize L2 as cache.
+ *
+ * The newer 8548, etc, parts have twice as much cache, but
+ * use the same bit-encoding as the older 8555, etc, parts.
+ *
+ * FIXME: Use PVR_VER(pvr) == 1 test here instead of SVR_VER()?
*/
-int cpu_init_r (void)
+
+int cpu_init_r(void)
{
#if defined(CONFIG_L2_CACHE)
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_l2cache_t *l2cache = &immap->im_l2cache;
- volatile uint temp;
+ volatile uint cache_ctl;
+ uint svr, ver;
+
+ svr = get_svr();
+ ver = SVR_VER(svr);
+
+ asm("msync;isync");
+ cache_ctl = l2cache->l2ctl;
+
+ switch (cache_ctl & 0x30000000) {
+ case 0x20000000:
+ if (ver == SVR_8548 || ver == SVR_8548_E) {
+ printf ("L2 cache 512KB:");
+ } else {
+ printf ("L2 cache 256KB:");
+ }
+ break;
+ case 0x00000000:
+ case 0x10000000:
+ case 0x30000000:
+ default:
+ printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
+ return -1;
+ }
asm("msync;isync");
l2cache->l2ctl = 0x68000000; /* invalidate */
- temp = l2cache->l2ctl;
+ cache_ctl = l2cache->l2ctl;
asm("msync;isync");
+
l2cache->l2ctl = 0xa8000000; /* enable 256KB L2 cache */
- temp = l2cache->l2ctl;
+ cache_ctl = l2cache->l2ctl;
asm("msync;isync");
- printf("L2: 256 kB enabled\n");
+ printf(" enabled\n");
#else
- printf("L2: disabled.\n");
+ printf("L2 cache: disabled\n");
#endif
return 0;
diff --git a/cpu/mpc85xx/ether_fcc.c b/cpu/mpc85xx/ether_fcc.c
index 122ca87..cbbb3a4 100644
--- a/cpu/mpc85xx/ether_fcc.c
+++ b/cpu/mpc85xx/ether_fcc.c
@@ -48,7 +48,7 @@
#include <config.h>
#include <net.h>
-#if defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \
defined(CONFIG_NET_MULTI)
@@ -458,4 +458,4 @@ int fec_initialize(bd_t *bis)
#endif /* CONFIG_ETHER_ON_FCC && CFG_CMD_NET && CONFIG_NET_MULTI */
-#endif /* CONFIG_MPC8560 */
+#endif /* CONFIG_CPM2 */
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
index ea82761..cf060d6 100644
--- a/cpu/mpc85xx/serial_scc.c
+++ b/cpu/mpc85xx/serial_scc.c
@@ -35,7 +35,7 @@
#include <common.h>
#include <asm/cpm_85xx.h>
-#if defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
#if defined(CONFIG_CONS_ON_SCC)
#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
@@ -271,4 +271,4 @@ serial_tstc()
#endif /* CONFIG_CONS_ON_SCC */
-#endif /* CONFIG_MPC8560 */
+#endif /* CONFIG_CPM2 */
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 5a1dbe2..af99282 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -28,10 +28,11 @@
#include <spd.h>
#include <asm/mmu.h>
-#if defined(CONFIG_DDR_ECC)
-extern void dma_init (void);
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void dma_init(void);
extern uint dma_check(void);
-extern int dma_xfer (void *dest, uint count, void *src);
+extern int dma_xfer(void *dest, uint count, void *src);
#endif
#ifdef CONFIG_SPD_EEPROM
@@ -40,6 +41,9 @@ extern int dma_xfer (void *dest, uint count, void *src);
#define CFG_READ_SPD i2c_read
#endif
+static unsigned int setup_laws_and_tlbs(unsigned int memsize);
+
+
/*
* Convert picoseconds into clock cycles (rounding up if needed).
*/
@@ -57,311 +61,829 @@ picos_to_clk(int picos)
return clks;
}
+
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * Study these table from Byte 31 of JEDEC SPD Spec.
+ *
+ * DDR I DDR II
+ * Bit Size Size
+ * --- ----- ------
+ * 7 high 512MB 512MB
+ * 6 256MB 256MB
+ * 5 128MB 128MB
+ * 4 64MB 16GB
+ * 3 32MB 8GB
+ * 2 16MB 4GB
+ * 1 2GB 2GB
+ * 0 low 1GB 1GB
+ *
+ * Reorder Table to be linear by stripping the bottom
+ * 2 or 5 bits off and shifting them up to the top.
+ */
+
+unsigned int
+compute_banksize(unsigned int mem_type, unsigned char row_dens)
+{
+ unsigned int bsize;
+
+ if (mem_type == SPD_MEMTYPE_DDR) {
+ /* Bottom 2 bits up to the top. */
+ bsize = ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
+ debug("DDR: DDR I rank density = 0x%08x\n", bsize);
+ } else {
+ /* Bottom 5 bits up to the top. */
+ bsize = ((row_dens >> 5) | ((row_dens & 31) << 3)) << 27;
+ debug("DDR: DDR II rank density = 0x%08x\n", bsize);
+ }
+ return bsize;
+}
+
+
+/*
+ * Convert a two-nibble BCD value into a cycle time.
+ * While the spec calls for nano-seconds, picos are returned.
+ *
+ * This implements the tables for bytes 9, 23 and 25 for both
+ * DDR I and II. No allowance for distinguishing the invalid
+ * fields absent for DDR I yet present in DDR II is made.
+ * (That is, cycle times of .25, .33, .66 and .75 ns are
+ * allowed for both DDR II and I.)
+ */
+
unsigned int
-banksize(unsigned char row_dens)
+convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
{
- return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
+ /*
+ * Table look up the lower nibble, allow DDR I & II.
+ */
+ unsigned int tenths_ps[16] = {
+ 0,
+ 100,
+ 200,
+ 300,
+ 400,
+ 500,
+ 600,
+ 700,
+ 800,
+ 900,
+ 250,
+ 330, /* FIXME: Is 333 better/valid? */
+ 660, /* FIXME: Is 667 better/valid? */
+ 750,
+ 0, /* undefined */
+ 0 /* undefined */
+ };
+
+ unsigned int whole_ns = (spd_val & 0xF0) >> 4;
+ unsigned int tenth_ns = spd_val & 0x0F;
+ unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
+
+ return ps;
}
+
long int
spd_sdram(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_ddr_t *ddr = &immap->im_ddr;
- volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
spd_eeprom_t spd;
- unsigned tmp, tmp1;
+ unsigned int n_ranks;
+ unsigned int rank_density;
+ unsigned int odt_rd_cfg, odt_wr_cfg;
+ unsigned int odt_cfg, mode_odt_enable;
+ unsigned int dqs_cfg;
+ unsigned char twr_clk, twtr_clk, twr_auto_clk;
+ unsigned int tCKmin_ps, tCKmax_ps;
+ unsigned int max_data_rate, effective_data_rate;
+ unsigned int busfreq;
+ unsigned sdram_cfg;
unsigned int memsize;
- unsigned int tlb_size;
- unsigned int law_size;
- unsigned char caslat;
- unsigned int ram_tlb_index;
- unsigned int ram_tlb_address;
+ unsigned char caslat, caslat_ctrl;
+ unsigned int trfc, trfc_clk, trfc_low, trfc_high;
+ unsigned int trcd_clk;
+ unsigned int trtp_clk;
+ unsigned char cke_min_clk;
+ unsigned char add_lat;
+ unsigned char wr_lat;
+ unsigned char wr_data_delay;
+ unsigned char four_act;
+ unsigned char cpo;
+ unsigned char burst_len;
+ unsigned int mode_caslat;
+ unsigned char sdram_type;
+ unsigned char d_init;
- CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
+ /*
+ * Read SPD information.
+ */
+ CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) &spd, sizeof(spd));
- if (spd.nrows > 2) {
- puts("DDR:Only two chip selects are supported on ADS.\n");
+ /*
+ * Check for supported memory module types.
+ */
+ if (spd.mem_type != SPD_MEMTYPE_DDR &&
+ spd.mem_type != SPD_MEMTYPE_DDR2) {
+ printf("Unable to locate DDR I or DDR II module.\n"
+ " Fundamental memory type is 0x%0x\n",
+ spd.mem_type);
return 0;
}
- if (spd.nrow_addr < 12
- || spd.nrow_addr > 14
- || spd.ncol_addr < 8
- || spd.ncol_addr > 11) {
- puts("DDR:Row or Col number unsupported.\n");
+ /*
+ * These test gloss over DDR I and II differences in interpretation
+ * of bytes 3 and 4, but irrelevantly. Multiple asymmetric banks
+ * are not supported on DDR I; and not encoded on DDR II.
+ *
+ * Also note that the 8548 controller can support:
+ * 12 <= nrow <= 16
+ * and
+ * 8 <= ncol <= 11 (still, for DDR)
+ * 6 <= ncol <= 9 (for FCRAM)
+ */
+ if (spd.nrow_addr < 12 || spd.nrow_addr > 14) {
+ printf("DDR: Unsupported number of Row Addr lines: %d.\n",
+ spd.nrow_addr);
+ return 0;
+ }
+ if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
+ printf("DDR: Unsupported number of Column Addr lines: %d.\n",
+ spd.ncol_addr);
return 0;
}
- ddr->cs0_bnds = (banksize(spd.row_dens) >> 24) - 1;
- ddr->cs0_config = ( 1 << 31
- | (spd.nrow_addr - 12) << 8
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("cs0_bnds = 0x%08x\n",ddr->cs0_bnds);
- debug("cs0_config = 0x%08x\n",ddr->cs0_config);
-
- if (spd.nrows == 2) {
- ddr->cs1_bnds = ( (banksize(spd.row_dens) >> 8)
- | ((banksize(spd.row_dens) >> 23) - 1) );
- ddr->cs1_config = ( 1<<31
- | (spd.nrow_addr-12) << 8
- | (spd.ncol_addr-8) );
- debug("cs1_bnds = 0x%08x\n",ddr->cs1_bnds);
- debug("cs1_config = 0x%08x\n",ddr->cs1_config);
+ /*
+ * Determine the number of physical banks controlled by
+ * different Chip Select signals. This is not quite the
+ * same as the number of DIMM modules on the board. Feh.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ n_ranks = spd.nrows;
+ } else {
+ n_ranks = (spd.nrows & 0x7) + 1;
}
- if (spd.mem_type != 0x07) {
- puts("No DDR module found!\n");
+ debug("DDR: number of ranks = %d\n", n_ranks);
+
+ if (n_ranks > 2) {
+ printf("DDR: Only 2 chip selects are supported: %d\n",
+ n_ranks);
return 0;
}
/*
- * Figure out memory size in Megabytes.
+ * Adjust DDR II IO voltage biasing. It just makes it work.
*/
- memsize = spd.nrows * banksize(spd.row_dens) / 0x100000;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ gur->ddrioovcr = (0
+ | 0x80000000 /* Enable */
+ | 0x10000000 /* VSEL to 1.8V */
+ );
+ }
/*
- * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23. Fnord.
+ * Determine the size of each Rank in bytes.
*/
- law_size = 19 + __ilog2(memsize);
+ rank_density = compute_banksize(spd.mem_type, spd.row_dens);
+
/*
- * Determine size of each TLB1 entry.
+ * Eg: Bounds: 0x0000_0000 to 0x0f000_0000 first 256 Meg
*/
- switch (memsize) {
- case 16:
- case 32:
- tlb_size = BOOKE_PAGESZ_16M;
- break;
- case 64:
- case 128:
- tlb_size = BOOKE_PAGESZ_64M;
- break;
- case 256:
- case 512:
- case 1024:
- case 2048:
- tlb_size = BOOKE_PAGESZ_256M;
- break;
- default:
- puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G DDR I are supported.\n");
- return 0;
- break;
- }
+ ddr->cs0_bnds = (rank_density >> 24) - 1;
/*
- * Configure DDR TLB1 entries.
- * Starting at TLB1 8, use no more than 8 TLB1 entries.
+ * ODT configuration recommendation from DDR Controller Chapter.
*/
- ram_tlb_index = 8;
- ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
- while (ram_tlb_address < (memsize * 1024 * 1024)
- && ram_tlb_index < 16) {
- mtspr(MAS0, TLB1_MAS0(1, ram_tlb_index, 0));
- mtspr(MAS1, TLB1_MAS1(1, 1, 0, 0, tlb_size));
- mtspr(MAS2, TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 0, 0, 0));
- mtspr(MAS3, TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
- asm volatile("isync;msync;tlbwe;isync");
+ odt_rd_cfg = 0; /* Never assert ODT */
+ odt_wr_cfg = 0; /* Never assert ODT */
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ odt_wr_cfg = 1; /* Assert ODT on writes to CS0 */
+#if 0
+ /* FIXME: How to determine the number of dimm modules? */
+ if (n_dimm_modules == 2) {
+ odt_rd_cfg = 1; /* Assert ODT on reads to CS0 */
+ }
+#endif
+ }
- debug("DDR:MAS0=0x%08x\n", TLB1_MAS0(1, ram_tlb_index, 0));
- debug("DDR:MAS1=0x%08x\n", TLB1_MAS1(1, 1, 0, 0, tlb_size));
- debug("DDR:MAS2=0x%08x\n",
- TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 0, 0, 0));
- debug("DDR:MAS3=0x%08x\n",
- TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+ ddr->cs0_config = ( 1 << 31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("\n");
+ debug("DDR: cs0_bnds = 0x%08x\n", ddr->cs0_bnds);
+ debug("DDR: cs0_config = 0x%08x\n", ddr->cs0_config);
- ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2));
- ram_tlb_index++;
+ if (n_ranks == 2) {
+ /*
+ * Eg: Bounds: 0x0f00_0000 to 0x1e0000_0000, second 256 Meg
+ */
+ ddr->cs1_bnds = ( (rank_density >> 8)
+ | ((rank_density >> (24 - 1)) - 1) );
+ ddr->cs1_config = ( 1<<31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("DDR: cs1_bnds = 0x%08x\n", ddr->cs1_bnds);
+ debug("DDR: cs1_config = 0x%08x\n", ddr->cs1_config);
}
+
/*
- * Set up LAWBAR for all of DDR.
+ * Find the largest CAS by locating the highest 1 bit
+ * in the spd.cas_lat field. Translate it to a DDR
+ * controller field value:
+ *
+ * CAS Lat DDR I DDR II Ctrl
+ * Clocks SPD Bit SPD Bit Value
+ * ------- ------- ------- -----
+ * 1.0 0 0001
+ * 1.5 1 0010
+ * 2.0 2 2 0011
+ * 2.5 3 0100
+ * 3.0 4 3 0101
+ * 3.5 5 0110
+ * 4.0 4 0111
+ * 4.5 1000
+ * 5.0 5 1001
*/
- ecm->lawbar1 = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
- ecm->lawar1 = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
- debug("DDR:LAWBAR1=0x%08x\n", ecm->lawbar1);
- debug("DDR:LARAR1=0x%08x\n", ecm->lawar1);
-
- /*
- * find the largest CAS
- */
- if(spd.cas_lat & 0x40) {
- caslat = 7;
- } else if (spd.cas_lat & 0x20) {
- caslat = 6;
- } else if (spd.cas_lat & 0x10) {
- caslat = 5;
- } else if (spd.cas_lat & 0x08) {
- caslat = 4;
- } else if (spd.cas_lat & 0x04) {
- caslat = 3;
- } else if (spd.cas_lat & 0x02) {
- caslat = 2;
- } else if (spd.cas_lat & 0x01) {
- caslat = 1;
- } else {
- puts("DDR:no valid CAS Latency information.\n");
+ caslat = __ilog2(spd.cas_lat);
+ if ((spd.mem_type == SPD_MEMTYPE_DDR)
+ && (caslat > 5)) {
+ printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
+ return 0;
+
+ } else if (spd.mem_type == SPD_MEMTYPE_DDR2
+ && (caslat < 2 || caslat > 5)) {
+ printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
+ spd.cas_lat);
return 0;
}
+ debug("DDR: caslat SPD bit is %d\n", caslat);
+
+ /*
+ * Calculate the Maximum Data Rate based on the Minimum Cycle time.
+ * The SPD clk_cycle field (tCKmin) is measured in tenths of
+ * nanoseconds and represented as BCD.
+ */
+ tCKmin_ps = convert_bcd_tenths_to_cycle_time_ps(spd.clk_cycle);
+ debug("DDR: tCKmin = %d ps\n", tCKmin_ps);
+
+ /*
+ * Double-data rate, scaled 1000 to picoseconds, and back down to MHz.
+ */
+ max_data_rate = 2 * 1000 * 1000 / tCKmin_ps;
+ debug("DDR: Module max data rate = %d Mhz\n", max_data_rate);
+
- tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10
- + (spd.clk_cycle & 0x0f));
- debug("DDR:Module maximum data rate is: %dMhz\n", tmp);
+ /*
+ * Adjust the CAS Latency to allow for bus speeds that
+ * are slower than the DDR module.
+ */
+ busfreq = get_bus_freq(0) / 1000000; /* MHz */
- tmp1 = get_bus_freq(0) / 1000000;
- if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) {
- /* 90~230 range, treated as DDR 200 */
- if (spd.clk_cycle3 == 0xa0)
+ effective_data_rate = max_data_rate;
+ if (busfreq < 90) {
+ /* DDR rate out-of-range */
+ puts("DDR: platform frequency is not fit for DDR rate\n");
+ return 0;
+
+ } else if (90 <= busfreq && busfreq < 230 && max_data_rate >= 230) {
+ /*
+ * busfreq 90~230 range, treated as DDR 200.
+ */
+ effective_data_rate = 200;
+ if (spd.clk_cycle3 == 0xa0) /* 10 ns */
caslat -= 2;
- else if(spd.clk_cycle2 == 0xa0)
+ else if (spd.clk_cycle2 == 0xa0)
caslat--;
- } else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) {
- /* 230-280 range, treated as DDR 266 */
- if (spd.clk_cycle3 == 0x75)
+
+ } else if (230 <= busfreq && busfreq < 280 && max_data_rate >= 280) {
+ /*
+ * busfreq 230~280 range, treated as DDR 266.
+ */
+ effective_data_rate = 266;
+ if (spd.clk_cycle3 == 0x75) /* 7.5 ns */
caslat -= 2;
else if (spd.clk_cycle2 == 0x75)
caslat--;
- } else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) {
- /* 280~350 range, treated as DDR 333 */
- if (spd.clk_cycle3 == 0x60)
+
+ } else if (280 <= busfreq && busfreq < 350 && max_data_rate >= 350) {
+ /*
+ * busfreq 280~350 range, treated as DDR 333.
+ */
+ effective_data_rate = 333;
+ if (spd.clk_cycle3 == 0x60) /* 6.0 ns */
caslat -= 2;
else if (spd.clk_cycle2 == 0x60)
caslat--;
- } else if (tmp1 < 90 || tmp1 >= 350) {
- /* DDR rate out-of-range */
- puts("DDR:platform frequency is not fit for DDR rate\n");
+
+ } else if (350 <= busfreq && busfreq < 460 && max_data_rate >= 460) {
+ /*
+ * busfreq 350~460 range, treated as DDR 400.
+ */
+ effective_data_rate = 400;
+ if (spd.clk_cycle3 == 0x50) /* 5.0 ns */
+ caslat -= 2;
+ else if (spd.clk_cycle2 == 0x50)
+ caslat--;
+
+ } else if (460 <= busfreq && busfreq < 560 && max_data_rate >= 560) {
+ /*
+ * busfreq 460~560 range, treated as DDR 533.
+ */
+ effective_data_rate = 533;
+ if (spd.clk_cycle3 == 0x3D) /* 3.75 ns */
+ caslat -= 2;
+ else if (spd.clk_cycle2 == 0x3D)
+ caslat--;
+
+ } else if (560 <= busfreq && busfreq < 700 && max_data_rate >= 700) {
+ /*
+ * busfreq 560~700 range, treated as DDR 667.
+ */
+ effective_data_rate = 667;
+ if (spd.clk_cycle3 == 0x30) /* 3.0 ns */
+ caslat -= 2;
+ else if (spd.clk_cycle2 == 0x30)
+ caslat--;
+
+ } else if (700 <= busfreq) {
+ /*
+ * DDR rate out-of-range
+ */
+ printf("DDR: Bus freq %d MHz is not fit for DDR rate %d MHz\n",
+ busfreq, max_data_rate);
return 0;
}
+
/*
- * note: caslat must also be programmed into ddr->sdram_mode
- * register.
- *
- * note: WRREC(Twr) and WRTORD(Twtr) are not in SPD,
- * use conservative value here.
+ * Convert caslat clocks to DDR controller value.
+ * Force caslat_ctrl to be DDR Controller field-sized.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ caslat_ctrl = (caslat + 1) & 0x07;
+ } else {
+ caslat_ctrl = (2 * caslat - 1) & 0x0f;
+ }
+
+ debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
+ debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
+ caslat, caslat_ctrl);
+
+ /*
+ * Timing Config 0.
+ * Avoid writing for DDR I. The new PQ38 DDR controller
+ * dreams up non-zero default values to be backwards compatible.
*/
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ unsigned char taxpd_clk = 8; /* By the book. */
+ unsigned char tmrd_clk = 2; /* By the book. */
+ unsigned char act_pd_exit = 2; /* Empirical? */
+ unsigned char pre_pd_exit = 6; /* Empirical? */
+
+ ddr->timing_cfg_0 = (0
+ | ((act_pd_exit & 0x7) << 20) /* ACT_PD_EXIT */
+ | ((pre_pd_exit & 0x7) << 16) /* PRE_PD_EXIT */
+ | ((taxpd_clk & 0xf) << 8) /* ODT_PD_EXIT */
+ | ((tmrd_clk & 0xf) << 0) /* MRS_CYC */
+ );
+#if 0
+ ddr->timing_cfg_0 |= 0xaa000000; /* extra cycles */
+#endif
+ debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+
+ } else {
+#if 0
+ /*
+ * Force extra cycles with 0xaa bits.
+ * Incidentally supply the dreamt-up backwards compat value!
+ */
+ ddr->timing_cfg_0 = 0x00110105; /* backwards compat value */
+ ddr->timing_cfg_0 |= 0xaa000000; /* extra cycles */
+ debug("DDR: HACK timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+#endif
+ }
+
+
+ /*
+ * Some Timing Config 1 values now.
+ * Sneak Extended Refresh Recovery in here too.
+ */
+
+ /*
+ * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
+ * use conservative value.
+ * For DDR II, they are bytes 36 and 37, in quarter nanos.
+ */
+
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ twr_clk = 3; /* Clocks */
+ twtr_clk = 1; /* Clocks */
+ } else {
+ twr_clk = picos_to_clk(spd.twr * 250);
+ twtr_clk = picos_to_clk(spd.twtr * 250);
+ }
+
+ /*
+ * Calculate Trfc, in picos.
+ * DDR I: Byte 42 straight up in ns.
+ * DDR II: Byte 40 and 42 swizzled some, in ns.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ trfc = spd.trfc * 1000; /* up to ps */
+ } else {
+ unsigned int byte40_table_ps[8] = {
+ 0,
+ 250,
+ 330,
+ 500,
+ 660,
+ 750,
+ 0,
+ 0
+ };
+
+ trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
+ + byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
+ }
+ trfc_clk = picos_to_clk(trfc);
+
+ /*
+ * Trcd, Byte 29, from quarter nanos to ps and clocks.
+ */
+ trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
+
+ /*
+ * Convert trfc_clk to DDR controller fields. DDR I should
+ * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
+ * 8548 controller has an extended REFREC field of three bits.
+ * The controller automatically adds 8 clocks to this value,
+ * so preadjust it down 8 first before splitting it up.
+ */
+ trfc_low = (trfc_clk - 8) & 0xf;
+ trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
+
+ /*
+ * Sneak in some Extended Refresh Recovery.
+ */
+ ddr->ext_refrec = (trfc_high << 16);
+ debug("DDR: ext_refrec = 0x%08x\n", ddr->ext_refrec);
+
ddr->timing_cfg_1 =
- (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
- ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
- ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
- ((caslat & 0x07) << 16 ) |
- (((picos_to_clk(spd.sset[6] * 1000) - 8) & 0x0f) << 12 ) |
- ( 0x300 ) |
- ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
+ (0
+ | ((picos_to_clk(spd.trp * 250) & 0x07) << 28) /* PRETOACT */
+ | ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24) /* ACTTOPRE */
+ | (trcd_clk << 20) /* ACTTORW */
+ | (caslat_ctrl << 16) /* CASLAT */
+ | (trfc_low << 12) /* REFEC */
+ | ((twr_clk & 0x07) << 8) /* WRRREC */
+ | ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) /* ACTTOACT */
+ | ((twtr_clk & 0x07) << 0) /* WRTORD */
+ );
- ddr->timing_cfg_2 = 0x00000800;
+ debug("DDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
- debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
- debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
/*
- * Only DDR I is supported
- * DDR I and II have different mode-register-set definition
+ * Timing_Config_2
+ * Was: 0x00000800;
*/
- /* burst length is always 4 */
- switch(caslat) {
- case 2:
- ddr->sdram_mode = 0x52; /* 1.5 */
- break;
- case 3:
- ddr->sdram_mode = 0x22; /* 2.0 */
- break;
- case 4:
- ddr->sdram_mode = 0x62; /* 2.5 */
- break;
- case 5:
- ddr->sdram_mode = 0x32; /* 3.0 */
- break;
- default:
- puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
- return 0;
+ /*
+ * Additive Latency
+ * For DDR I, 0.
+ * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
+ * which comes from Trcd, and also note that:
+ * add_lat + caslat must be >= 4
+ */
+ add_lat = 0;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2
+ && (odt_wr_cfg || odt_rd_cfg)
+ && (caslat < 4)) {
+ add_lat = 4 - caslat;
+ if (add_lat > trcd_clk) {
+ add_lat = trcd_clk - 1;
+ }
}
- debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
- switch(spd.refresh) {
- case 0x00:
- case 0x80:
- tmp = picos_to_clk(15625000);
- break;
- case 0x01:
- case 0x81:
- tmp = picos_to_clk(3900000);
- break;
- case 0x02:
- case 0x82:
- tmp = picos_to_clk(7800000);
- break;
- case 0x03:
- case 0x83:
- tmp = picos_to_clk(31300000);
- break;
- case 0x04:
- case 0x84:
- tmp = picos_to_clk(62500000);
- break;
- case 0x05:
- case 0x85:
- tmp = picos_to_clk(125000000);
- break;
- default:
- tmp = 0x512;
- break;
+ /*
+ * Write Data Delay
+ * Historically 0x2 == 4/8 clock delay.
+ * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
+ */
+ wr_data_delay = 3;
+
+ /*
+ * Write Latency
+ * Read to Precharge
+ * Minimum CKE Pulse Width.
+ * Four Activate Window
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ /*
+ * This is a lie. It should really be 1, but if it is
+ * set to 1, bits overlap into the old controller's
+ * otherwise unused ACSM field. If we leave it 0, then
+ * the HW will magically treat it as 1 for DDR 1. Oh Yea.
+ */
+ wr_lat = 0;
+
+ trtp_clk = 2; /* By the book. */
+ cke_min_clk = 1; /* By the book. */
+ four_act = 1; /* By the book. */
+
+ } else {
+ wr_lat = caslat - 1;
+
+ /* Convert SPD value from quarter nanos to picos. */
+ trtp_clk = picos_to_clk(spd.trtp * 250);
+
+ cke_min_clk = 3; /* By the book. */
+ four_act = picos_to_clk(37500); /* By the book. 1k pages? */
+ }
+
+ /*
+ * Empirically set ~MCAS-to-preamble override for DDR 2.
+ * Your milage will vary.
+ */
+ cpo = 0;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+ if (effective_data_rate == 266 || effective_data_rate == 333) {
+ cpo = 0x7; /* READ_LAT + 5/4 */
+ } else if (effective_data_rate == 400) {
+ cpo = 0x9; /* READ_LAT + 7/4 */
+ } else {
+ /* Pure speculation */
+ cpo = 0xb;
+ }
+ }
+
+ ddr->timing_cfg_2 = (0
+ | ((add_lat & 0x7) << 28) /* ADD_LAT */
+ | ((cpo & 0x1f) << 23) /* CPO */
+ | ((wr_lat & 0x7) << 19) /* WR_LAT */
+ | ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */
+ | ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */
+ | ((cke_min_clk & 0x7) << 6) /* CKE_PLS */
+ | ((four_act & 0x1f) << 0) /* FOUR_ACT */
+ );
+
+ debug("DDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
+
+
+ /*
+ * Determine the Mode Register Set.
+ *
+ * This is nominally part specific, but it appears to be
+ * consistent for all DDR I devices, and for all DDR II devices.
+ *
+ * caslat must be programmed
+ * burst length is always 4
+ * burst type is sequential
+ *
+ * For DDR I:
+ * operating mode is "normal"
+ *
+ * For DDR II:
+ * other stuff
+ */
+
+ mode_caslat = 0;
+
+ /*
+ * Table lookup from DDR I or II Device Operation Specs.
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ if (1 <= caslat && caslat <= 4) {
+ unsigned char mode_caslat_table[4] = {
+ 0x5, /* 1.5 clocks */
+ 0x2, /* 2.0 clocks */
+ 0x6, /* 2.5 clocks */
+ 0x3 /* 3.0 clocks */
+ };
+ mode_caslat = mode_caslat_table[caslat - 1];
+ } else {
+ puts("DDR I: Only CAS Latencies of 1.5, 2.0, "
+ "2.5 and 3.0 clocks are supported.\n");
+ return 0;
+ }
+
+ } else {
+ if (2 <= caslat && caslat <= 5) {
+ mode_caslat = caslat;
+ } else {
+ puts("DDR II: Only CAS Latencies of 2.0, 3.0, "
+ "4.0 and 5.0 clocks are supported.\n");
+ return 0;
+ }
+ }
+
+ /*
+ * Encoded Burst Lenght of 4.
+ */
+ burst_len = 2; /* Fiat. */
+
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ twr_auto_clk = 0; /* Historical */
+ } else {
+ /*
+ * Determine tCK max in picos. Grab tWR and convert to picos.
+ * Auto-precharge write recovery is:
+ * WR = roundup(tWR_ns/tCKmax_ns).
+ *
+ * Ponder: Is twr_auto_clk different than twr_clk?
+ */
+ tCKmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd.tckmax);
+ twr_auto_clk = (spd.twr * 250 + tCKmax_ps - 1) / tCKmax_ps;
+ }
+
+
+ /*
+ * Mode Reg in bits 16 ~ 31,
+ * Extended Mode Reg 1 in bits 0 ~ 15.
+ */
+ mode_odt_enable = 0x0; /* Default disabled */
+ if (odt_wr_cfg || odt_rd_cfg) {
+ /*
+ * Bits 6 and 2 in Extended MRS(1)
+ * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
+ * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
+ */
+ mode_odt_enable = 0x40; /* 150 Ohm */
}
+ ddr->sdram_mode =
+ (0
+ | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */
+ | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */
+ | (twr_auto_clk << 9) /* Write Recovery Autopre */
+ | (mode_caslat << 4) /* caslat */
+ | (burst_len << 0) /* Burst length */
+ );
+
+ debug("DDR: sdram_mode = 0x%08x\n", ddr->sdram_mode);
+
+
+ /*
+ * Clear EMRS2 and EMRS3.
+ */
+ ddr->sdram_mode_2 = 0;
+ debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2);
+
+
/*
- * Set BSTOPRE to 0x100 for page mode
- * If auto-charge is used, set BSTOPRE = 0
+ * Determine Refresh Rate. Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
*/
- ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
- debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
+ {
+ unsigned int refresh_clk;
+ unsigned int refresh_time_ns[8] = {
+ 15625000, /* 0 Normal 1.00x */
+ 3900000, /* 1 Reduced .25x */
+ 7800000, /* 2 Extended .50x */
+ 31300000, /* 3 Extended 2.00x */
+ 62500000, /* 4 Extended 4.00x */
+ 125000000, /* 5 Extended 8.00x */
+ 15625000, /* 6 Normal 1.00x filler */
+ 15625000, /* 7 Normal 1.00x filler */
+ };
+
+ refresh_clk = picos_to_clk(refresh_time_ns[spd.refresh & 0x7]);
+
+ /*
+ * Set BSTOPRE to 0x100 for page mode
+ * If auto-charge is used, set BSTOPRE = 0
+ */
+ ddr->sdram_interval =
+ (0
+ | (refresh_clk & 0x3fff) << 16
+ | 0x100
+ );
+ debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
+ }
/*
* Is this an ECC DDR chip?
+ * But don't mess with it if the DDR controller will init mem.
*/
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
if (spd.config == 0x02) {
ddr->err_disable = 0x0000000d;
ddr->err_sbe = 0x00ff0000;
}
- debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
- debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
+ debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
+ debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
#endif
- asm("sync;isync;msync");
+ asm("sync;isync;msync");
udelay(500);
-#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
- /* Setup the clock control (8555 and later)
- * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
- * SDRAM_CLK_CNTL[5-7] = Clock Adjust == 3 (3/4 cycle late)
+ /*
+ * SDRAM Cfg 2
+ */
+
+ /*
+ * When ODT is enabled, Chap 9 suggests asserting ODT to
+ * internal IOs only during reads.
+ */
+ odt_cfg = 0;
+ if (odt_rd_cfg | odt_wr_cfg) {
+ odt_cfg = 0x2; /* ODT to IOs during reads */
+ }
+
+ /*
+ * Try to use differential DQS with DDR II.
*/
- ddr->sdram_clk_cntl = 0x83000000;
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ dqs_cfg = 0; /* No Differential DQS for DDR I */
+ } else {
+ dqs_cfg = 0x1; /* Differential DQS for DDR II */
+ }
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Use the DDR controller to auto initialize memory.
+ */
+ d_init = 1;
+ ddr->sdram_data_init = CONFIG_MEM_INIT_VALUE;
+ debug("DDR: ddr_data_init = 0x%08x\n", ddr->sdram_data_init);
+#else
+ /*
+ * Memory will be initialized via DMA, or not at all.
+ */
+ d_init = 0;
+#endif
+
+ ddr->sdram_cfg_2 = (0
+ | (dqs_cfg << 26) /* Differential DQS */
+ | (odt_cfg << 21) /* ODT */
+ | (d_init << 4) /* D_INIT auto init DDR */
+ );
+
+ debug("DDR: sdram_cfg_2 = 0x%08x\n", ddr->sdram_cfg_2);
+
+
+#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
+ {
+ unsigned char clk_adjust;
+
+ /*
+ * Setup the clock control.
+ * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
+ * SDRAM_CLK_CNTL[5-7] = Clock Adjust
+ * 0110 3/4 cycle late
+ * 0111 7/8 cycle late
+ */
+ if (spd.mem_type == SPD_MEMTYPE_DDR) {
+ clk_adjust = 0x6;
+ } else {
+ clk_adjust = 0x7;
+ }
+
+ ddr->sdram_clk_cntl = (0
+ | 0x80000000
+ | (clk_adjust << 23)
+ );
+ debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
+ }
#endif
/*
- * Figure out the settings for the sdram_cfg register. Build up
- * the entire register in 'tmp' before writing since the write into
- * the register will actually enable the memory controller, and all
- * settings must be done before enabling.
+ * Figure out the settings for the sdram_cfg register.
+ * Build up the entire register in 'sdram_cfg' before writing
+ * since the write into the register will actually enable the
+ * memory controller; all settings must be done before enabling.
*
* sdram_cfg[0] = 1 (ddr sdram logic enable)
* sdram_cfg[1] = 1 (self-refresh-enable)
- * sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM)
+ * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
+ * 010 DDR 1 SDRAM
+ * 011 DDR 2 SDRAM
*/
- tmp = 0xc2000000;
+ sdram_type = (spd.mem_type == SPD_MEMTYPE_DDR) ? 2 : 3;
+ sdram_cfg = (0
+ | (1 << 31) /* Enable */
+ | (1 << 30) /* Self refresh */
+ | (sdram_type << 24) /* SDRAM type */
+ );
/*
* sdram_cfg[3] = RD_EN - registered DIMM enable
* A value of 0x26 indicates micron registered DIMMS (micron.com)
*/
- if (spd.mod_attr == 0x26) {
- tmp |= 0x10000000;
+ if (spd.mem_type == SPD_MEMTYPE_DDR && spd.mod_attr == 0x26) {
+ sdram_cfg |= 0x10000000; /* RD_EN */
}
#if defined(CONFIG_DDR_ECC)
@@ -369,7 +891,7 @@ spd_sdram(void)
* If the user wanted ECC (enabled via sdram_cfg[2])
*/
if (spd.config == 0x02) {
- tmp |= 0x20000000;
+ sdram_cfg |= 0x20000000; /* ECC_EN */
}
#endif
@@ -385,27 +907,160 @@ spd_sdram(void)
/*
* Enable 2T timing by setting sdram_cfg[16].
*/
- tmp |= 0x8000;
+ sdram_cfg |= 0x8000; /* 2T_EN */
#endif
}
}
- ddr->sdram_cfg = tmp;
+ /*
+ * 200 painful micro-seconds must elapse between
+ * the DDR clock setup and the DDR config enable.
+ */
+ udelay(200);
+
+ /*
+ * Go!
+ */
+ ddr->sdram_cfg = sdram_cfg;
asm("sync;isync;msync");
udelay(500);
- debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
+ debug("DDR: sdram_cfg = 0x%08x\n", ddr->sdram_cfg);
+
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Poll until memory is initialized.
+ * 512 Meg at 400 might hit this 200 times or so.
+ */
+ while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
+ udelay(1000);
+ }
+#endif
+
+
+ /*
+ * Figure out memory size in Megabytes.
+ */
+ memsize = n_ranks * rank_density / 0x100000;
+
+ /*
+ * Establish Local Access Window and TLB mappings for DDR memory.
+ */
+ memsize = setup_laws_and_tlbs(memsize);
+ if (memsize == 0) {
+ return 0;
+ }
return memsize * 1024 * 1024;
}
+
+
+/*
+ * Setup Local Access Window and TLB1 mappings for the requested
+ * amount of memory. Returns the amount of memory actually mapped
+ * (usually the original request size), or 0 on error.
+ */
+
+static unsigned int
+setup_laws_and_tlbs(unsigned int memsize)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+ unsigned int tlb_size;
+ unsigned int law_size;
+ unsigned int ram_tlb_index;
+ unsigned int ram_tlb_address;
+
+ /*
+ * Determine size of each TLB1 entry.
+ */
+ switch (memsize) {
+ case 16:
+ case 32:
+ tlb_size = BOOKE_PAGESZ_16M;
+ break;
+ case 64:
+ case 128:
+ tlb_size = BOOKE_PAGESZ_64M;
+ break;
+ case 256:
+ case 512:
+ case 1024:
+ case 2048:
+ tlb_size = BOOKE_PAGESZ_256M;
+ break;
+ default:
+ puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n");
+
+ /*
+ * The memory was not able to be mapped.
+ */
+ return 0;
+ break;
+ }
+
+ /*
+ * Configure DDR TLB1 entries.
+ * Starting at TLB1 8, use no more than 8 TLB1 entries.
+ */
+ ram_tlb_index = 8;
+ ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
+ while (ram_tlb_address < (memsize * 1024 * 1024)
+ && ram_tlb_index < 16) {
+ mtspr(MAS0, TLB1_MAS0(1, ram_tlb_index, 0));
+ mtspr(MAS1, TLB1_MAS1(1, 1, 0, 0, tlb_size));
+ mtspr(MAS2, TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
+ 0, 0, 0, 0, 0, 0, 0, 0));
+ mtspr(MAS3, TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
+ 0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+ asm volatile("isync;msync;tlbwe;isync");
+
+ debug("DDR: MAS0=0x%08x\n", TLB1_MAS0(1, ram_tlb_index, 0));
+ debug("DDR: MAS1=0x%08x\n", TLB1_MAS1(1, 1, 0, 0, tlb_size));
+ debug("DDR: MAS2=0x%08x\n",
+ TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
+ 0, 0, 0, 0, 0, 0, 0, 0));
+ debug("DDR: MAS3=0x%08x\n",
+ TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
+ 0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+
+ ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2));
+ ram_tlb_index++;
+ }
+
+
+ /*
+ * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23. Fnord.
+ */
+ law_size = 19 + __ilog2(memsize);
+
+ /*
+ * Set up LAWBAR for all of DDR.
+ */
+ ecm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+ ecm->lawar1 = (LAWAR_EN
+ | LAWAR_TRGT_IF_DDR
+ | (LAWAR_SIZE & law_size));
+ debug("DDR: LAWBAR1=0x%08x\n", ecm->lawbar1);
+ debug("DDR: LARAR1=0x%08x\n", ecm->lawar1);
+
+ /*
+ * Confirm that the requested amount of memory was mapped.
+ */
+ return memsize;
+}
+
#endif /* CONFIG_SPD_EEPROM */
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+
/*
* Initialize all of memory for ECC, then enable errors.
*/
+
void
ddr_enable_ecc(unsigned int dram_size)
{
@@ -420,7 +1075,7 @@ ddr_enable_ecc(unsigned int dram_size)
if (((unsigned int)p & 0x1f) == 0) {
ppcDcbz((unsigned long) p);
}
- *p = (unsigned int)0xdeadbeef;
+ *p = (unsigned int)CONFIG_MEM_INIT_VALUE;
if (((unsigned int)p & 0x1c) == 0x1c) {
ppcDcbf((unsigned long) p);
}
@@ -454,7 +1109,10 @@ ddr_enable_ecc(unsigned int dram_size)
/*
* Enable errors for ECC.
*/
+ debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
ddr->err_disable = 0x00000000;
asm("sync;isync;msync");
+ debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
}
-#endif /* CONFIG_DDR_ECC */
+
+#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 787f7fa..d736742 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -82,7 +82,7 @@ int get_clocks (void)
{
DECLARE_GLOBAL_DATA_PTR;
sys_info_t sys_info;
-#if defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
uint sccr, dfbrg;
@@ -94,7 +94,7 @@ int get_clocks (void)
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freqProcessor;
gd->bus_clk = sys_info.freqSystemBus;
-#if defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
gd->vco_out = 2*sys_info.freqSystemBus;
gd->cpm_clk = gd->vco_out / 2;
gd->scc_clk = gd->vco_out / 4;
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index af28ebe..5f75bc1 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -155,11 +155,13 @@ _start_e500:
mtspr MCSR,r0
mtspr DEAR,r0
- mtspr DBCR0,r0
+ /* not needed and conflicts with some debuggers */
+ /* mtspr DBCR0,r0 */
mtspr DBCR1,r0
mtspr DBCR2,r0
- mtspr IAC1,r0
- mtspr IAC2,r0
+ /* not needed and conflicts with some debuggers */
+ /* mtspr IAC1,r0 */
+ /* mtspr IAC2,r0 */
mtspr DAC1,r0
mtspr DAC2,r0
@@ -174,6 +176,9 @@ _start_e500:
mtspr BUCSR,r0 /* disable branch prediction */
mtspr MAS4,r0
mtspr MAS6,r0
+#if defined(CONFIG_ENABLE_36BIT_PHYS)
+ mtspr MAS7,r0
+#endif
isync
/* Setup interrupt vectors */
@@ -358,6 +363,9 @@ _start:
/* Enable Time Base and Select Time Base Clock */
lis r0,HID0_EMCP@h /* Enable machine check */
ori r0,r0,0x4000 /* time base is processor clock */
+#if defined(CONFIG_ENABLE_36BIT_PHYS)
+ ori r0,r0,0x0080 /* enable MAS7 updates */
+#endif
mtspr HID0,r0
#if defined(CONFIG_ADDR_STREAMING)
diff --git a/doc/README.mpc83xxads b/doc/README.mpc83xxads
new file mode 100644
index 0000000..3d38397
--- /dev/null
+++ b/doc/README.mpc83xxads
@@ -0,0 +1,96 @@
+Freescale MPC83xx ADS Boards
+-----------------------------------------
+
+0. Toolchain / Building
+
+ % setenv CROSS_COMPILE /usr/powerpc/bin/powerpc-linux-
+
+ % /usr/powerpc/bin/powerpc-linux-gcc -v
+ Reading specs from /usr/powerpc/lib/gcc/powerpc-linux/3.4.3/specs
+ Configured with: ../configure --prefix=/usr/powerpc
+ --exec-prefix=/usr/powerpc --target=powerpc-linux --enable-shared
+ --disable-nls --disable-multilib --enable-languages=c,c++,ada,f77,objc
+ Thread model: posix
+ gcc version 3.4.3 (Debian)
+
+ % /usr/powerpc/bin/powerpc-linux-as -v
+ GNU assembler version 2.15 (powerpc-linux) using BFD version 2.15
+
+
+ % make MPC8349ADS_config
+ Configuring for MPC8349ADS board...
+
+ % make
+
+
+1. Board Switches and Jumpers
+
+
+2. Memory Map
+
+2.1. The memory map should look pretty much like this:
+
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0x8000_0000 0x9fff_ffff PCI MEM 512M
+ 0xc000_0000 0xdfff_ffff Rapid IO 512M
+ 0xe000_0000 0xe00f_ffff CCSR 1M
+ 0xe200_0000 0xe2ff_ffff PCI IO 16M
+ 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ 0xf800_0000 0xf80f_ffff BCSR 1M
+ 0xfe00_0000 0xffff_ffff FLASH (boot bank) 16M
+
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC8349ADS.h
+
+ CONFIG_MPC83xx MPC83xx family
+ CONFIG_MPC8349 MPC8349 specific
+ CONFIG_MPC8349ADS MPC8349ADS board specific
+ CONFIG_TSEC_ENET Use on-chip 10/100/1000 ethernet
+
+
+4. Compilation
+
+ Assuming you're using BASH shell:
+
+ export CROSS_COMPILE=your-cross-compile-prefix
+ cd u-boot
+ make distclean
+ make MPC8349ADS_config
+ make
+
+5. Downloading and Flashing Images
+
+5.0 Download over serial line using Kermit:
+
+ loadb
+ [Drop to kermit:
+ ^\c
+ send <u-boot-bin-image>
+ c
+ ]
+
+
+ Or via tftp:
+
+ tftp 10000 u-boot.bin
+
+5.1 Reflash U-boot Image using U-boot
+
+ tftp 10000 u-boot.bin
+ protect off fe000000 fe09ffff
+ erase fe000000 fe09ffff
+
+ cp.b 10000 fe000000 xxxx
+or
+ cp.b 10000 fe000000 a0000
+
+You might have to supply the correct byte count for 'xxxx' from
+the TFTP. Maybe a0000 will work too, that corresponds to the
+erased sectors.
+
+
+6. Notes
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index 939de20..08d6831 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -134,7 +134,6 @@ Updated 13-July-2004 Jon Loeliger
CONFIG_E500 BOOKE e500 family(Motorola)
CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives
CONFIG_MPC8540 MPC8540 specific
- CONFIG_MPC8560 MPC8560 specific
CONFIG_MPC8540ADS MPC8540ADS board specific
CONFIG_MPC8560ADS MPC8560ADS board specific
CONFIG_TSEC_ENET Use on-chip 10/100/1000 ethernet for networking
@@ -144,6 +143,7 @@ Updated 13-July-2004 Jon Loeliger
CONFIG_DDR_ECC only for ECC DDR module
CONFIG_DDR_DLL DLL fix on some ADS boards needed for more
stability.
+ CONFIG_HAS_FEC If an FEC is on chip, set to 1, else 0.
Other than the above definitions, the rest in the config files are
straightforward.
@@ -191,10 +191,10 @@ straightforward.
4.4 Reflash U-boot Image using U-boot
- => tftp 10000 u-boot.bin
- => protect off fff80000 ffffffff
- => erase fff80000 ffffffff
- => cp.b 10000 fff80000 80000
+ tftp 10000 u-boot.bin
+ protect off fff80000 ffffffff
+ erase fff80000 ffffffff
+ cp.b 10000 fff80000 80000
4.5 Reflash U-Boot with a BDI-2000
diff --git a/doc/README.mpc85xxcds b/doc/README.mpc85xxcds
index e0f4916..bc5db0c 100644
--- a/doc/README.mpc85xxcds
+++ b/doc/README.mpc85xxcds
@@ -135,8 +135,8 @@ The default setting of all switches on the carrier board is:
SW4=10001000
-CPU Card Switches
------------------
+8555/41 CPU Card Switches
+-------------------------
Most switches on the CPU Card should not be changed. However, the
frequency can be changed by setting SW3:
@@ -160,6 +160,45 @@ A safe default setting for all switches on the CPU board is:
SW4=11111110
+8548 CPU Card Switches
+----------------------
+And, just to be confusing, in this set of switches:
+
+ ON = 1
+ OFF = 0
+
+Default
+ SW1=11111101
+ SW2=10011111
+ SW3=11001000 (8X) (2:1)
+ SW4=11110011
+
+ SW3=X000XXXX == CORE:CCB 4:1
+ X001XXXX == CORE:CCB 9:2
+ X010XXXX == CORE:CCB 1:1
+ X011XXXX == CORE:CCB 3:2
+ X100XXXX == CORE:CCB 2:1
+ X101XXXX == CORE:CCB 5:2
+ X110XXXX == CORE:CCB 3:1
+ X111XXXX == CORE:CCB 7:2
+ XXXX0000 == CCB:SYSCLK 16:1
+ XXXX0001 == RESERVED
+ XXXX0010 == CCB:SYSCLK 2:1
+ XXXX0011 == CCB:SYSCLK 3:1
+ XXXX0100 == CCB:SYSCLK 4:1
+ XXXX0101 == CCB:SYSCLK 5:1
+ XXXX0110 == CCB:SYSCLK 6:1
+ XXXX0111 == RESERVED
+ XXXX1000 == CCB:SYSCLK 8:1
+ XXXX1001 == CCB:SYSCLK 9:1
+ XXXX1010 == CCB:SYSCLK 10:1
+ XXXX1011 == RESERVED
+ XXXX1100 == CCB:SYSCLK 12:1
+ XXXX1101 == CCB:SYSCLK 20:1
+ XXXX1110 == RESERVED
+ XXXX1111 == RESERVED
+
+
eDINK Info
----------
diff --git a/drivers/Makefile b/drivers/Makefile
index 3461bb1..26a556e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -45,7 +45,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
serial_pl010.o serial_pl011.o serial_xuartlite.o \
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o \
- ti_pci1410a.o tigon3.o \
+ ti_pci1410a.o tigon3.o tsec.o \
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
videomodes.o w83c553f.o \
ks8695eth.o
diff --git a/cpu/mpc85xx/tsec.c b/drivers/tsec.c
index d327a6d..0c8b0de 100644
--- a/cpu/mpc85xx/tsec.c
+++ b/drivers/tsec.c
@@ -8,7 +8,6 @@
*
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003, Motorola, Inc.
- * maintained by Jon Loeliger (loeliger@freescale.com)
* author Andy Fleming
*
*/
@@ -35,7 +34,7 @@ typedef volatile struct rtxbd {
struct tsec_info_struct {
unsigned int phyaddr;
- unsigned int gigabit;
+ u32 flags;
unsigned int phyregidx;
};
@@ -48,8 +47,9 @@ struct tsec_info_struct {
* phyaddr - The address of the PHY which is attached to
* the given device.
*
- * gigabit - This variable indicates whether the device
- * supports gigabit speed ethernet
+ * flags - This variable indicates whether the device
+ * supports gigabit speed ethernet, and whether it should be
+ * in reduced mode.
*
* phyregidx - This variable specifies which ethernet device
* controls the MII Management registers which are connected
@@ -69,24 +69,33 @@ struct tsec_info_struct {
* FEC_PHYIDX
*/
static struct tsec_info_struct tsec_info[] = {
-#ifdef CONFIG_MPC85XX_TSEC1
- {TSEC1_PHY_ADDR, 1, TSEC1_PHYIDX},
+#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
+ {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
#else
{ 0, 0, 0},
#endif
-#ifdef CONFIG_MPC85XX_TSEC2
- {TSEC2_PHY_ADDR, 1, TSEC2_PHYIDX},
+#if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2)
+ {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
#else
{ 0, 0, 0},
#endif
#ifdef CONFIG_MPC85XX_FEC
{FEC_PHY_ADDR, 0, FEC_PHYIDX},
#else
+# if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3)
+ {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
+# else
{ 0, 0, 0},
+# endif
+# if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4)
+ {TSEC4_PHY_ADDR, TSEC_REDUCED, TSEC4_PHYIDX},
+# else
+ { 0, 0, 0},
+# endif
#endif
};
-#define MAXCONTROLLERS 3
+#define MAXCONTROLLERS (4)
static int relocated = 0;
@@ -115,7 +124,7 @@ static void relocate_cmds(void);
/* Initialize device structure. Returns success if PHY
* initialization succeeded (i.e. if it recognizes the PHY)
*/
-int tsec_initialize(bd_t *bis, int index)
+int tsec_initialize(bd_t *bis, int index, char *devname)
{
struct eth_device* dev;
int i;
@@ -139,9 +148,9 @@ int tsec_initialize(bd_t *bis, int index)
tsec_info[index].phyregidx*TSEC_SIZE);
priv->phyaddr = tsec_info[index].phyaddr;
- priv->gigabit = tsec_info[index].gigabit;
+ priv->flags = tsec_info[index].flags;
- sprintf(dev->name, "ENET%d", index);
+ sprintf(dev->name, devname);
dev->iobase = 0;
dev->priv = priv;
dev->init = tsec_init;
@@ -226,7 +235,7 @@ void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
regbase->miimadd = (phyid << 8) | regnum;
regbase->miimcon = value;
- asm("msync");
+ asm("sync");
timeout=1000000;
while((regbase->miimind & MIIMIND_BUSY) && timeout--);
@@ -251,11 +260,11 @@ uint read_phy_reg(struct tsec_private *priv, uint regnum)
/* Clear the command register, and wait */
regbase->miimcom = 0;
- asm("msync");
+ asm("sync");
/* Initiate a read command, and wait */
regbase->miimcom = MIIM_READ_COMMAND;
- asm("msync");
+ asm("sync");
/* Wait for the the indication that the read is done */
while((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY)));
@@ -283,14 +292,14 @@ static int init_phy(struct eth_device *dev)
regs->tbipa = TBIPA_VALUE;
regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
regs->tbipa = TBIPA_VALUE;
- asm("msync");
+ asm("sync");
}
/* Reset MII (due to new addresses) */
priv->phyregs->miimcfg = MIIMCFG_RESET;
- asm("msync");
+ asm("sync");
priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
- asm("msync");
+ asm("sync");
while(priv->phyregs->miimind & MIIMIND_BUSY);
if(0 == relocated)
@@ -318,7 +327,7 @@ static int init_phy(struct eth_device *dev)
/* For 10/100, the value is slightly different */
uint mii_cr_init(uint mii_reg, struct tsec_private *priv)
{
- if(priv->gigabit)
+ if(priv->flags & TSEC_GIGABIT)
return MIIM_CONTROL_INIT;
else
return MIIM_CR_INIT;
@@ -429,7 +438,7 @@ uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
for(phyid=0;phyid<4;phyid++) {
regbase->miimadd = (phyid << 8) | mii_reg;
regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
- asm("msync");
+ asm("sync");
timeout=1000000;
while((regbase->miimind & MIIMIND_BUSY) && timeout--);
@@ -438,6 +447,13 @@ uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
return MIIM_CIS8204_SLEDCON_INIT;
}
+uint mii_cis8204_setmode(uint mii_reg, struct tsec_private *priv)
+{
+ if (priv->flags & TSEC_REDUCED)
+ return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
+ else
+ return MIIM_CIS8204_EPHYCON_INIT;
+}
/* Initialized required registers to appropriate values, zeroing
* those we don't care about (unless zero is bad, in which case,
@@ -507,6 +523,15 @@ static void adjust_link(struct eth_device *dev)
case 10:
regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
| MACCFG2_MII);
+
+ /* If We're in reduced mode, we need
+ * to say whether we're 10 or 100 MB.
+ */
+ if ((priv->speed == 100)
+ && (priv->flags & TSEC_REDUCED))
+ regs->ecntrl |= ECNTRL_R100;
+ else
+ regs->ecntrl &= ~(ECNTRL_R100);
break;
default:
printf("%s: Speed was bad\n", dev->name);
@@ -731,7 +756,7 @@ struct phy_info phy_info_cis8204 = {
/* Configure some basic stuff */
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
{MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, &mii_cis8204_fixled},
- {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, NULL},
+ {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, &mii_cis8204_setmode},
{miim_end,}
},
(struct phy_cmd[]) { /* startup */
diff --git a/cpu/mpc85xx/tsec.h b/drivers/tsec.h
index e24351a..15961d7 100644
--- a/cpu/mpc85xx/tsec.h
+++ b/drivers/tsec.h
@@ -18,11 +18,22 @@
#define __TSEC_H
#include <net.h>
-#include <mpc85xx.h>
+#include <config.h>
+
+#ifndef CFG_TSEC1_OFFSET
+ #define CFG_TSEC1_OFFSET (0x24000)
+#endif
-#define TSEC_BASE_ADDR (CFG_IMMR + 0x24000)
#define TSEC_SIZE 0x01000
+/* FIXME: Should these be pushed back to 83xx and 85xx config files? */
+#if defined(CONFIG_MPC85xx)
+ #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET)
+#elif defined(CONFIG_MPC83XX)
+ #define TSEC_BASE_ADDR (CFG_IMMRBAR + CFG_TSEC1_OFFSET)
+#endif
+
+
#define MAC_ADDR_LEN 6
/* #define TSEC_TIMEOUT 1000000 */
@@ -51,6 +62,7 @@
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_R100 0x00000008
#define miim_end -2
#define miim_read -1
@@ -107,6 +119,7 @@
/* Cicada 8204 Extended PHY Control Register 1 */
#define MIIM_CIS8204_EPHY_CON 0x17
#define MIIM_CIS8204_EPHYCON_INIT 0x0006
+#define MIIM_CIS8204_EPHYCON_RGMII 0x1000
/* Cicada 8204 Serial LED Control Register */
#define MIIM_CIS8204_SLED_CON 0x1b
@@ -424,12 +437,18 @@ typedef struct tsec
uint resc00[256];
} tsec_t;
+#define TSEC_GIGABIT (1)
+
+/* This flag currently only has
+ * meaning if we're using the eTSEC */
+#define TSEC_REDUCED (1 << 1)
+
struct tsec_private {
volatile tsec_t *regs;
volatile tsec_t *phyregs;
struct phy_info *phyinfo;
uint phyaddr;
- uint gigabit;
+ u32 flags;
uint link;
uint duplexity;
uint speed;
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
new file mode 100644
index 0000000..908007c
--- /dev/null
+++ b/include/asm-ppc/e300.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ * Liberty Eran (liberty@freescale.com)
+ */
+
+#ifndef __E300_H__
+#define __E300_H__
+
+/*
+ * e300 Processor Version & Revision Numbers
+ */
+#define PVR_83xx 0x80830000
+#define PVR_8349_REV10 (PVR_83xx | 0x0010)
+#define PVR_8349_REV11 (PVR_83xx | 0x0011)
+
+/*
+ * Hardware Implementation-Dependent Register 0 (HID0)
+ */
+
+/* #define HID0 1008 already defined in processor.h */
+#define HID0_MASK_MACHINE_CHECK 0x00000000
+#define HID0_ENABLE_MACHINE_CHECK 0x80000000
+
+#define HID0_DISABLE_CACHE_PARITY 0x00000000
+#define HID0_ENABLE_CACHE_PARITY 0x40000000
+
+#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
+
+#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_DATE_PARITY 0x10000000
+
+#define HID0_CORE_CLK_OUT 0x00000000
+#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
+
+#define HID0_ENABLE_ARTRY_OUT_PRECHARGE 0x00000000 /* on mpc8349ads must be enabled */
+#define HID0_DISABLE_ARTRY_OUT_PRECHARGE 0x01000000
+
+#define HID0_DISABLE_DOSE_MODE 0x00000000
+#define HID0_ENABLE_DOSE_MODE 0x00800000
+
+#define HID0_DISABLE_NAP_MODE 0x00000000
+#define HID0_ENABLE_NAP_MODE 0x00400000
+
+#define HID0_DISABLE_SLEEP_MODE 0x00000000
+#define HID0_ENABLE_SLEEP_MODE 0x00200000
+
+#define HID0_DISABLE_DYNAMIC_POWER_MANAGMENT 0x00000000
+#define HID0_ENABLE_DYNAMIC_POWER_MANAGMENT 0x00100000
+
+#define HID0_SOFT_RESET 0x00010000
+
+#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
+#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
+
+#define HID0_DISABLE_DATA_CACHE 0x00000000
+#define HID0_ENABLE_DATA_CACHE 0x00004000
+
+#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
+
+#define HID0_LOCK_DATA_CACHE 0x00001000
+
+#define HID0_INVALIDATE_INSTRUCTION_CACHE 0x00000800
+
+#define HID0_INVALIDATE_DATA_CACHE 0x00000400
+
+#define HID0_DISABLE_M_BIT 0x00000000
+#define HID0_ENABLE_M_BIT 0x00000080
+
+#define HID0_FBIOB 0x00000010
+
+#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
+#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
+
+#define HID0_ENABLE_NOOP_DCACHE_INSTRUCTION 0x00000000
+#define HID0_DISABLE_NOOP_DCACHE_INSTRUCTION 0x00000001
+
+/*
+ * Hardware Implementation-Dependent Register 2 (HID2)
+ */
+#define HID2 1011
+
+#define HID2_LET 0x08000000
+#define HID2_HBE 0x00040000
+#define HID2_IWLCK_000 0x00000000 /* no ways locked */
+#define HID2_IWLCK_001 0x00002000 /* way 0 locked */
+#define HID2_IWLCK_010 0x00004000 /* way 0 through way 1 locked */
+#define HID2_IWLCK_011 0x00006000 /* way 0 through way 2 locked */
+#define HID2_IWLCK_100 0x00008000 /* way 0 through way 3 locked */
+#define HID2_IWLCK_101 0x0000A000 /* way 0 through way 4 locked */
+#define HID2_IWLCK_110 0x0000C000 /* way 0 through way 5 locked */
+
+
+/* BAT (block address translation */
+#define BATU_BEPI_MSK 0xfffe0000
+#define BATU_BL_MSK 0x00001ffc
+
+#define BATU_BL_128K 0x00000000
+#define BATU_BL_256K 0x00000004
+#define BATU_BL_512K 0x0000000c
+#define BATU_BL_1M 0x0000001c
+#define BATU_BL_2M 0x0000003c
+#define BATU_BL_4M 0x0000007c
+#define BATU_BL_8M 0x000000fc
+#define BATU_BL_16M 0x000001fc
+#define BATU_BL_32M 0x000003fc
+#define BATU_BL_64M 0x000007fc
+#define BATU_BL_128M 0x00000ffc
+#define BATU_BL_256M 0x00001ffc
+
+#define BATU_VS 0x00000002
+#define BATU_VP 0x00000001
+
+#define BATL_BRPN_MSK 0xfffe0000
+#define BATL_WIMG_MSK 0x00000078
+
+#define BATL_WRITETHROUGH 0x00000040
+#define BATL_CACHEINHIBIT 0x00000020
+#define BATL_MEMCOHERENCE 0x00000010
+#define BATL_GUARDEDSTORAGE 0x00000008
+
+#define BATL_PP_MSK 0x00000003
+#define BATL_PP_00 0x00000000 /* No access */
+#define BATL_PP_01 0x00000001 /* Read-only */
+#define BATL_PP_10 0x00000002 /* Read-write */
+#define BATL_PP_11 0x00000003
+
+#endif /* __E300_H__ */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index c800f63..9681a74 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -23,6 +23,9 @@
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
+
+#include "asm/types.h"
+
/*
* The following data structure is placed in some memory wich is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
@@ -39,13 +42,27 @@ typedef struct global_data {
unsigned long baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
-#if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
unsigned long vco_out;
unsigned long cpm_clk;
unsigned long scc_clk;
unsigned long brg_clk;
#endif
+#if defined(CONFIG_MPC83XX)
+ /* There are other clocks in the MPC83XX */
+ u32 csb_clk;
+ u32 tsec1_clk;
+ u32 tsec2_clk;
+ u32 core_clk;
+ u32 usbmph_clk;
+ u32 usbdr_clk;
+ u32 i2c_clk;
+ u32 enc_clk;
+ u32 lbiu_clk;
+ u32 lclk_clk;
+ u32 ddr_clk;
+#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
unsigned long pci_clk;
@@ -64,7 +81,7 @@ typedef struct global_data {
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long have_console; /* serial_init() was called */
-#if defined(CFG_ALLOC_DPRAM) || defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CFG_ALLOC_DPRAM) || defined(CONFIG_CPM2)
unsigned int dp_alloc_base;
unsigned int dp_alloc_top;
#endif
diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h
new file mode 100644
index 0000000..2a4ac0f
--- /dev/null
+++ b/include/asm-ppc/i2c.h
@@ -0,0 +1,103 @@
+/*
+ * Freescale I2C Controller
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2003, Motorola, Inc.
+ * author: Eran Liberty (liberty@freescale.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_I2C_H_
+#define _ASM_I2C_H_
+
+#include <asm/types.h>
+
+typedef struct i2c
+{
+ u8 adr; /**< I2C slave address */
+#define I2C_ADR 0xFE
+#define I2C_ADR_SHIFT 1
+#define I2C_ADR_RES ~(I2C_ADR)
+ u8 res0[3];
+ u8 fdr; /**< I2C frequency divider register */
+#define IC2_FDR 0x3F
+#define IC2_FDR_SHIFT 0
+#define IC2_FDR_RES ~(IC2_FDR)
+ u8 res1[3];
+ u8 cr; /**< I2C control redister */
+#define I2C_CR_MEN 0x80
+#define I2C_CR_MIEN 0x40
+#define I2C_CR_MSTA 0x20
+#define I2C_CR_MTX 0x10
+#define I2C_CR_TXAK 0x08
+#define I2C_CR_RSTA 0x04
+#define I2C_CR_BCST 0x01
+ u8 res2[3];
+ u8 sr; /**< I2C status register */
+#define I2C_SR_MCF 0x80
+#define I2C_SR_MAAS 0x40
+#define I2C_SR_MBB 0x20
+#define I2C_SR_MAL 0x10
+#define I2C_SR_BCSTM 0x08
+#define I2C_SR_SRW 0x04
+#define I2C_SR_MIF 0x02
+#define I2C_SR_RXAK 0x01
+ u8 res3[3];
+ u8 dr; /**< I2C data register */
+#define I2C_DR 0xFF
+#define I2C_DR_SHIFT 0
+#define I2C_DR_RES ~(I2C_DR)
+ u8 res4[3];
+ u8 dfsrr; /**< I2C digital filter sampling rate register */
+#define I2C_DFSRR 0x3F
+#define I2C_DFSRR_SHIFT 0
+#define I2C_DFSRR_RES ~(I2C_DR)
+ u8 res5[3];
+ u8 res6[0xE8];
+} i2c_t;
+
+#ifndef CFG_HZ
+#error CFG_HZ is not defined in /include/configs/${BOARD}.h
+#endif
+#define I2C_TIMEOUT (CFG_HZ/4)
+
+#ifndef CFG_IMMRBAR
+#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
+#endif
+
+#ifndef CFG_I2C_OFFSET
+#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h
+#endif
+
+#ifdef CONFIG_MPC8349ADS
+/*
+ * MPC8349 have two i2c bus
+ */
+extern i2c_t * mpc8349_i2c;
+#define I2C mpc8349_i2c
+#else
+#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#endif /* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
new file mode 100644
index 0000000..5d284d4
--- /dev/null
+++ b/include/asm-ppc/immap_83xx.h
@@ -0,0 +1,1060 @@
+/*
+ * MPC8349 Internal Memory Map
+ * Copyright (c) 2004 Freescale Semiconductor.
+ * Eran Liberty (liberty@freescale.com)
+ *
+ * based on:
+ * - MPC8260 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * - MPC85xx Internal Memory Map
+ * Copyright(c) 2002,2003 Motorola Inc.
+ * Xianghua Xiao (x.xiao@motorola.com)
+ */
+#ifndef __IMMAP_8349__
+#define __IMMAP_8349__
+
+#include <asm/types.h>
+#include <asm/i2c.h>
+
+/*
+ * Local Access Window.
+ */
+typedef struct law8349 {
+ u32 bar; /* LBIU local access window base address register */
+/* Identifies the 20 most-significant address bits of the base of local
+ * access window n. The specified base address should be aligned to the
+ * window size, as defined by LBLAWARn[SIZE].
+ */
+#define LAWBAR_BAR 0xFFFFF000
+#define LAWBAR_RES ~(LAWBAR_BAR)
+ u32 ar; /* LBIU local access window attribute register */
+/*
+ * This Macro were moved into mmu.h
+ */
+#if 0
+/* 0 The local bus local access window n is disabled. 1 The local bus
+ * local access window n is enabled and other LBLAWAR0 and LBLAWBAR0 fields
+ * combine to identify an address range for this window.
+ */
+#define LAWAR_EN 0x80000000
+/* Identifies the size of the window from the starting address. Window
+ * size is 2^(SIZE+1) bytes. 000000–001010Reserved. Window is
+ * undefined.
+ */
+#define LAWAR_SIZE 0x0000003F
+#define LAWAR_SIZE_4K 0x0000000B
+#define LAWAR_SIZE_8K 0x0000000C
+#define LAWAR_SIZE_16K 0x0000000D
+#define LAWAR_SIZE_32K 0x0000000E
+#define LAWAR_SIZE_64K 0x0000000F
+#define LAWAR_SIZE_128K 0x00000010
+#define LAWAR_SIZE_256K 0x00000011
+#define LAWAR_SIZE_512K 0x00000012
+#define LAWAR_SIZE_1M 0x00000013
+#define LAWAR_SIZE_2M 0x00000014
+#define LAWAR_SIZE_4M 0x00000015
+#define LAWAR_SIZE_8M 0x00000016
+#define LAWAR_SIZE_16M 0x00000017
+#define LAWAR_SIZE_32M 0x00000018
+#define LAWAR_SIZE_64M 0x00000019
+#define LAWAR_SIZE_128M 0x0000001A
+#define LAWAR_SIZE_256M 0x0000001B
+#define LAWAR_SIZE_512M 0x0000001C
+#define LAWAR_SIZE_1G 0x0000001D
+#define LAWAR_SIZE_2G 0x0000001E
+#define LAWAR_RES ~(LAWAR_EN|LAWAR_SIZE)
+#endif
+
+} law8349_t;
+
+/*
+ * System configuration registers.
+ */
+typedef struct sysconf8349 {
+ u32 immrbar; /* Internal memory map base address register */
+ u8 res0[0x04];
+ u32 altcbar; /* Alternate configuration base address register */
+/* Identifies the12 most significant address bits of an alternate base
+ * address used for boot sequencer configuration accesses.
+ */
+#define ALTCBAR_BASE_ADDR 0xFFF00000
+#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
+ u8 res1[0x14];
+ law8349_t lblaw[4]; /* LBIU local access window */
+ u8 res2[0x20];
+ law8349_t pcilaw[2]; /* PCI local access window */
+ u8 res3[0x30];
+ law8349_t ddrlaw[2]; /* DDR local access window */
+ u8 res4[0x50];
+ u32 sgprl; /* System General Purpose Register Low */
+ u32 sgprh; /* System General Purpose Register High */
+ u32 spridr; /* System Part and Revision ID Register */
+#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */
+#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */
+ u8 res5[0x04];
+ u32 spcr; /* System Priority Configuration Register */
+#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */
+#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */
+#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */
+#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */
+#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */
+#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
+#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */
+#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */
+#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
+#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */
+#define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
+ | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
+ | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
+ u32 sicrl; /* System General Purpose Register Low */
+#define SICRL_LDP_A 0x80000000
+#define SICRL_USB0 0x40000000
+#define SICRL_USB1 0x20000000
+#define SICRL_UART 0x0C000000
+#define SICRL_GPIO1_A 0x02000000
+#define SICRL_GPIO1_B 0x01000000
+#define SICRL_GPIO1_C 0x00800000
+#define SICRL_GPIO1_D 0x00400000
+#define SICRL_GPIO1_E 0x00200000
+#define SICRL_GPIO1_F 0x00180000
+#define SICRL_GPIO1_G 0x00040000
+#define SICRL_GPIO1_H 0x00020000
+#define SICRL_GPIO1_I 0x00010000
+#define SICRL_GPIO1_J 0x00008000
+#define SICRL_GPIO1_K 0x00004000
+#define SICRL_GPIO1_L 0x00003000
+#define SICRL_RES ~(SICRL_LDP_A | SICRL_USB0 | SICRL_USB1 | SICRL_UART \
+ | SICRL_GPIO1_A | SICRL_GPIO1_B | SICRL_GPIO1_C \
+ | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \
+ | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \
+ | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L )
+ u32 sicrh; /* System General Purpose Register High */
+#define SICRH_DDR 0x80000000
+#define SICRH_TSEC1_A 0x10000000
+#define SICRH_TSEC1_B 0x08000000
+#define SICRH_TSEC1_C 0x04000000
+#define SICRH_TSEC1_D 0x02000000
+#define SICRH_TSEC1_E 0x01000000
+#define SICRH_TSEC1_F 0x00800000
+#define SICRH_TSEC2_A 0x00400000
+#define SICRH_TSEC2_B 0x00200000
+#define SICRH_TSEC2_C 0x00100000
+#define SICRH_TSEC2_D 0x00080000
+#define SICRH_TSEC2_E 0x00040000
+#define SICRH_TSEC2_F 0x00020000
+#define SICRH_TSEC2_G 0x00010000
+#define SICRH_TSEC2_H 0x00008000
+#define SICRH_GPIO2_A 0x00004000
+#define SICRH_GPIO2_B 0x00002000
+#define SICRH_GPIO2_C 0x00001000
+#define SICRH_GPIO2_D 0x00000800
+#define SICRH_GPIO2_E 0x00000400
+#define SICRH_GPIO2_F 0x00000200
+#define SICRH_GPIO2_G 0x00000180
+#define SICRH_GPIO2_H 0x00000060
+#define SICRH_TSOBI1 0x00000002
+#define SICRH_TSOBI2 0x00000001
+#define SICRh_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
+ | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \
+ | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \
+ | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \
+ | SICRH_TSEC2_F | SICRH_TSEC2_G | SICRH_TSEC2_H \
+ | SICRH_GPIO2_A | SICRH_GPIO2_B | SICRH_GPIO2_C \
+ | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \
+ | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \
+ | SICRH_TSOBI2)
+ u8 res6[0xE4];
+} sysconf8349_t;
+
+/*
+ * Watch Dog Timer (WDT) Registers
+ */
+typedef struct wdt8349 {
+ u8 res0[4];
+ u32 swcrr; /* System watchdog control register */
+ u32 swcnr; /* System watchdog count register */
+#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+#define SWCNR_RES ~(SWCNR_SWCN)
+ u8 res1[2];
+ u16 swsrr; /* System watchdog service register */
+ u8 res2[0xF0];
+} wdt8349_t;
+
+/*
+ * RTC/PIT Module Registers
+ */
+typedef struct rtclk8349 {
+ u32 cnr; /* control register */
+#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */
+#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */
+#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */
+#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */
+#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
+ u32 ldr; /* load register */
+ u32 psr; /* prescale register */
+ u32 ctr; /* register */
+ u32 evr; /* event register */
+#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */
+#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */
+#define RTEVR_RES ~(EVR_SIF | EVR_AIF)
+ u32 alr; /* alarm register */
+ u8 res0[0xE8];
+} rtclk8349_t;
+
+/*
+ * Global timper module
+ */
+
+typedef struct gtm8349 {
+ u8 cfr1; /* Timer1/2 Configuration */
+#define CFR1_PCAS 0x80 /* Pair Cascade mode */
+#define CFR1_BCM 0x40 /* Backward compatible mode */
+#define CFR1_STP2 0x20 /* Stop timer */
+#define CFR1_RST2 0x10 /* Reset timer */
+#define CFR1_GM2 0x08 /* Gate mode for pin 2 */
+#define CFR1_GM1 0x04 /* Gate mode for pin 1 */
+#define CFR1_STP1 0x02 /* Stop timer */
+#define CFR1_RST1 0x01 /* Reset timer */
+ u8 res0[3];
+ u8 cfr2; /* Timer3/4 Configuration */
+#define CFR2_PCAS 0x80 /* Pair Cascade mode */
+#define CFR2_SCAS 0x40 /* Super Cascade mode */
+#define CFR2_STP4 0x20 /* Stop timer */
+#define CFR2_RST4 0x10 /* Reset timer */
+#define CFR2_GM4 0x08 /* Gate mode for pin 4 */
+#define CFR2_GM3 0x04 /* Gate mode for pin 3 */
+#define CFR2_STP3 0x02 /* Stop timer */
+#define CFR2_RST3 0x01 /* Reset timer */
+ u8 res1[10];
+ u16 mdr1; /* Timer1 Mode Register */
+#define MDR_SPS 0xff00 /* Secondary Prescaler value */
+#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */
+#define MDR_OM 0x0020 /* Output mode */
+#define MDR_ORI 0x0010 /* Output reference interrupt enable */
+#define MDR_FRR 0x0008 /* Free run/restart */
+#define MDR_ICLK 0x0006 /* Input clock source for the timer */
+#define MDR_GE 0x0001 /* Gate enable */
+ u16 mdr2; /* Timer2 Mode Register */
+ u16 rfr1; /* Timer1 Reference Register */
+ u16 rfr2; /* Timer2 Reference Register */
+ u16 cpr1; /* Timer1 Capture Register */
+ u16 cpr2; /* Timer2 Capture Register */
+ u16 cnr1; /* Timer1 Counter Register */
+ u16 cnr2; /* Timer2 Counter Register */
+ u16 mdr3; /* Timer3 Mode Register */
+ u16 mdr4; /* Timer4 Mode Register */
+ u16 rfr3; /* Timer3 Reference Register */
+ u16 rfr4; /* Timer4 Reference Register */
+ u16 cpr3; /* Timer3 Capture Register */
+ u16 cpr4; /* Timer4 Capture Register */
+ u16 cnr3; /* Timer3 Counter Register */
+ u16 cnr4; /* Timer4 Counter Register */
+ u16 evr1; /* Timer1 Event Register */
+ u16 evr2; /* Timer2 Event Register */
+ u16 evr3; /* Timer3 Event Register */
+ u16 evr4; /* Timer4 Event Register */
+#define GTEVR_REF 0x0002 /* Output reference event */
+#define GTEVR_CAP 0x0001 /* Counter Capture event */
+#define GTEVR_RES ~(EVR_CAP|EVR_REF)
+ u16 psr1; /* Timer1 Prescaler Register */
+ u16 psr2; /* Timer2 Prescaler Register */
+ u16 psr3; /* Timer3 Prescaler Register */
+ u16 psr4; /* Timer4 Prescaler Register */
+ u8 res[0xC0];
+} gtm8349_t;
+
+/*
+ * Integrated Programmable Interrupt Controller
+ */
+typedef struct ipic8349 {
+ u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */
+#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */
+#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */
+#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */
+#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */
+#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */
+#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */
+#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
+ u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */
+#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */
+#define SICVR_IVEC 0x0000007f /* Interrupt vector */
+#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
+ u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */
+#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */
+#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */
+#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */
+#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */
+#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */
+#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */
+#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */
+#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */
+#define SIIH_UART1 0x00000080 /* UART1 interrupt */
+#define SIIH_UART2 0x00000040 /* UART2 interrupt */
+#define SIIH_SEC 0x00000020 /* SEC interrupt */
+#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */
+#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */
+#define SIIH_SPI 0x00000001 /* SPI interrupt */
+#define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \
+ | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \
+ | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \
+ | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \
+ | SIIH_I2C2 | SIIH_SPI)
+ u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */
+#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */
+#define SIIL_PIT 0x40000000 /* PIT interrupt */
+#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */
+#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */
+#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */
+#define SIIL_MU 0x04000000 /* Message Unit interrupt */
+#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */
+#define SIIL_DMA 0x01000000 /* DMA interrupt */
+#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */
+#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */
+#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */
+#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */
+#define SIIL_DDR 0x00080000 /* DDR interrupt */
+#define SIIL_LBC 0x00040000 /* LBC interrupt */
+#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */
+#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */
+#define SIIL_PMC 0x00008000 /* PMC interrupt */
+#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */
+#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */
+#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */
+#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */
+#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */
+#define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \
+ | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \
+ | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \
+ | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \
+ | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \
+ | SIIL_GTM5 |SIIL_DPTC )
+ u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */
+ u8 res0[8];
+ u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */
+ u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */
+ u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */
+ u8 res1[4];
+ u32 sepnr; /* System External Interrupt Pending Register (SEI) */
+ u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */
+ u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */
+#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
+#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
+#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
+#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */
+#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */
+#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */
+#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
+#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
+#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
+ u32 semsr; /* System External Interrupt Mask Register (SEI) */
+#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */
+#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */
+#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */
+#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */
+#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */
+#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */
+#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */
+#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */
+#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */
+#define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \
+ | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \
+ | SEI_SIRQ0)
+ u32 secnr; /* System External Interrupt Control Register (SECNR) */
+#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */
+#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */
+#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */
+#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */
+#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */
+#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */
+#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */
+#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */
+#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */
+#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */
+#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */
+#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */
+#define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \
+ | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \
+ | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \
+ | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7)
+ u32 sersr; /* System Error Status Register (SERR) */
+ u32 sermr; /* System Error Mask Register (SERR) */
+#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */
+#define SERR_WDT 0x40000000 /* WDT MCP request */
+#define SERR_SBA 0x20000000 /* SBA MCP request */
+#define SERR_DDR 0x10000000 /* DDR MCP request */
+#define SERR_LBC 0x08000000 /* LBC MCP request */
+#define SERR_PCI1 0x04000000 /* PCI1 MCP request */
+#define SERR_PCI2 0x02000000 /* PCI2 MCP request */
+#define SERR_MU 0x01000000 /* MU MCP request */
+#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */
+#define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \
+ |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \
+ |SERR_RNC )
+ u32 sercr; /* System Error Control Register (SERCR) */
+#define SERCR_MCPR 0x00000001 /* MCP Route */
+#define SERCR_RES ~(SERCR_MCPR)
+ u8 res2[4];
+ u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */
+ u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */
+ u32 sefcr; /* System External Interrupt Force Register (SEI) */
+ u32 serfr; /* System Error Force Register (SERR) */
+ u8 res3[0xA0];
+} ipic8349_t;
+
+/*
+ * System Arbiter Registers
+ */
+typedef struct arbiter8349 {
+ u32 acr; /* Arbiter Configuration Register */
+#define ACR_COREDIS 0x10000000 /* Core disable. */
+#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */
+#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
+#define ACR_RPTCNT 0x00000700 /* Repeat count. */
+#define ACR_APARK 0x00000030 /* Address parking. */
+#define ACR_PARKM 0x0000000F /* Parking master. */
+#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
+ u32 atr; /* Arbiter Timers Register */
+#define ATR_DTO 0x00FF0000 /* Data time out. */
+#define ATR_ATO 0x000000FF /* Address time out. */
+#define ATR_RES ~(ATR_DTO|ATR_ATO)
+ u8 res[4];
+ u32 aer; /* Arbiter Event Register (AE)*/
+ u32 aidr; /* Arbiter Interrupt Definition Register (AE) */
+ u32 amr; /* Arbiter Mask Register (AE) */
+ u32 aeatr; /* Arbiter Event Attributes Register */
+#define AEATR_EVENT 0x07000000 /* Event type. */
+#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */
+#define AEATR_TBST 0x00000800 /* Transfer burst. */
+#define AEATR_TSIZE 0x00000700 /* Transfer Size. */
+#define AEATR_TTYPE 0x0000001F /* Transfer Type. */
+#define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE)
+ u32 aeadr; /* Arbiter Event Address Register */
+ u32 aerr; /* Arbiter Event Response Register (AE)*/
+#define AE_ETEA 0x00000020 /* Transfer error. */
+#define AE_RES_ 0x00000010 /* Reserved transfer type. */
+#define AE_ECW 0x00000008 /* External control word transfer type. */
+#define AE_AO 0x00000004 /* Address Only transfer type. */
+#define AE_DTO 0x00000002 /* Data time out. */
+#define AE_ATO 0x00000001 /* Address time out. */
+#define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO)
+ u8 res1[0xDC];
+} arbiter8349_t;
+
+/*
+ * Reset Module
+ */
+typedef struct reset8349 {
+ u32 rcwl; /* RCWL Register */
+#define RCWL_LBIUCM 0x80000000 /* LBIUCM */
+#define RCWL_LBIUCM_SHIFT 31
+#define RCWL_DDRCM 0x40000000 /* DDRCM */
+#define RCWL_DDRCM_SHIFT 30
+#define RCWL_SVCOD 0x30000000 /* SVCOD */
+#define RCWL_SPMF 0x0f000000 /* SPMF */
+#define RCWL_SPMF_SHIFT 24
+#define RCWL_COREPLL 0x007F0000 /* COREPLL */
+#define RCWL_COREPLL_SHIFT 16
+#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */
+#define RCWL_CEPDF 0x00000020 /* CEPDF */
+#define RCWL_CEPMF 0x0000001F /* CEPMF */
+#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+ u32 rcwh; /* RCHL Register */
+#define RCWH_PCIHOST 0x80000000 /* PCIHOST */
+#define RCWH_PCIHOST_SHIFT 31
+#define RCWH_PCI64 0x40000000 /* PCI64 */
+#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */
+#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */
+#define RCWH_COREDIS 0x08000000 /* COREDIS */
+#define RCWH_BMS 0x04000000 /* BMS */
+#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */
+#define RCWH_SWEN 0x00800000 /* SWEN */
+#define RCWH_ROMLOC 0x00700000 /* ROMLOC */
+#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */
+#define RCWH_TSEC2M 0x00003000 /* TSEC2M */
+#define RCWH_TPR 0x00000100 /* TPR */
+#define RCWH_TLE 0x00000008 /* TLE */
+#define RCWH_LALE 0x00000004 /* LALE */
+#define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \
+ | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \
+ | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \
+ | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \
+ | RCWH_TLE | RCWH_LALE)
+ u8 res0[8];
+ u32 rsr; /* Reset status Register */
+#define RSR_RSTSRC 0xE0000000 /* Reset source */
+#define RSR_RSTSRC_SHIFT 29
+#define RSR_BSF 0x00010000 /* Boot seq. fail */
+#define RSR_BSF_SHIFT 16
+#define RSR_SWSR 0x00002000 /* software soft reset */
+#define RSR_SWSR_SHIFT 13
+#define RSR_SWHR 0x00001000 /* software hard reset */
+#define RSR_SWHR_SHIFT 12
+#define RSR_JHRS 0x00000200 /* jtag hreset */
+#define RSR_JHRS_SHIFT 9
+#define RSR_JSRS 0x00000100 /* jtag sreset status */
+#define RSR_JSRS_SHIFT 8
+#define RSR_CSHR 0x00000010 /* checkstop reset status */
+#define RSR_CSHR_SHIFT 4
+#define RSR_SWRS 0x00000008 /* software watchdog reset status */
+#define RSR_SWRS_SHIFT 3
+#define RSR_BMRS 0x00000004 /* bus monitop reset status */
+#define RSR_BMRS_SHIFT 2
+#define RSR_SRS 0x00000002 /* soft reset status */
+#define RSR_SRS_SHIFT 1
+#define RSR_HRS 0x00000001 /* hard reset status */
+#define RSR_HRS_SHIFT 0
+#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS)
+ u32 rmr; /* Reset mode Register */
+#define RMR_CSRE 0x00000001 /* checkstop reset enable */
+#define RMR_CSRE_SHIFT 0
+#define RMR_RES ~(RMR_CSRE)
+ u32 rpr; /* Reset protection Register */
+ u32 rcr; /* Reset Control Register */
+#define RCR_SWHR 0x00000002 /* software hard reset */
+#define RCR_SWSR 0x00000001 /* software soft reset */
+#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
+ u32 rcer; /* Reset Control Enable Register */
+#define RCER_CRE 0x00000001 /* software hard reset */
+#define RCER_RES ~(RCER_CRE)
+ u8 res1[0xDC];
+} reset8349_t;
+
+typedef struct clk8349 {
+ u32 spmr; /* system PLL mode Register */
+#define SPMR_LBIUCM 0x80000000 /* LBIUCM */
+#define SPMR_DDRCM 0x40000000 /* DDRCM */
+#define SPMR_SVCOD 0x30000000 /* SVCOD */
+#define SPMR_SPMF 0x0F000000 /* SPMF */
+#define SPMR_CKID 0x00800000 /* CKID */
+#define SPMR_CKID_SHIFT 23
+#define SPMR_COREPLL 0x007F0000 /* COREPLL */
+#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */
+#define SPMR_CEPDF 0x00000020 /* CEPDF */
+#define SPMR_CEPMF 0x0000001F /* CEPMF */
+#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \
+ | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \
+ | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF)
+ u32 occr; /* output clock control Register */
+#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */
+#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */
+#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */
+#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */
+#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */
+#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */
+#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */
+#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */
+#define OCCR_PCICD0 0x00800000 /* PCICD0 */
+#define OCCR_PCICD1 0x00400000 /* PCICD1 */
+#define OCCR_PCICD2 0x00200000 /* PCICD2 */
+#define OCCR_PCICD3 0x00100000 /* PCICD3 */
+#define OCCR_PCICD4 0x00080000 /* PCICD4 */
+#define OCCR_PCICD5 0x00040000 /* PCICD5 */
+#define OCCR_PCICD6 0x00020000 /* PCICD6 */
+#define OCCR_PCICD7 0x00010000 /* PCICD7 */
+#define OCCR_PCI1CR 0x00000002 /* PCI1CR */
+#define OCCR_PCI2CR 0x00000001 /* PCI2CR */
+#define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \
+ | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \
+ | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \
+ | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \
+ | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \
+ | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR )
+ u32 sccr; /* system clock control Register */
+#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_ENCCM 0x03000000 /* ENCCM */
+#define SCCR_ENCCM_SHIFT 24
+#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */
+#define SCCR_USBMPHCM_SHIFT 22
+#define SCCR_USBDRCM 0x00300000 /* USBDRCM */
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_PCICM 0x00010000 /* PCICM */
+#define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \
+ | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM)
+ u8 res0[0xF4];
+} clk8349_t;
+
+/*
+ * Power Management Control Module
+ */
+typedef struct pmc8349 {
+ u32 pmccr; /* PMC Configuration Register */
+#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */
+#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */
+#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN)
+ u32 pmcer; /* PMC Event Register */
+#define PMCER_PMCI 0x00000001 /* PMC Interrupt */
+#define PMCER_RES ~(PMCER_PMCI)
+ u32 pmcmr; /* PMC Mask Register */
+#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */
+#define PMCMR_RES ~(PMCMR_PMCIE)
+ u8 res0[0xF4];
+} pmc8349_t;
+
+
+/*
+ * general purpose I/O module
+ */
+typedef struct gpio8349 {
+ u32 dir; /* direction register */
+ u32 odr; /* open drain register */
+ u32 dat; /* data register */
+ u32 ier; /* interrupt event register */
+ u32 imr; /* interrupt mask register */
+ u32 icr; /* external interrupt control register */
+ u8 res0[0xE8];
+} gpio8349_t;
+
+/*
+ * DDR Memory Controller Memory Map
+ */
+typedef struct ddr_cs_bnds{
+ u32 csbnds;
+#define CSBNDS_SA 0x00FF0000
+#define CSBNDS_SA_SHIFT 16
+#define CSBNDS_EA 0x000000FF
+#define CSBNDS_EA_SHIFT 0
+ u8 res0[4];
+} ddr_cs_bnds_t;
+
+typedef struct ddr8349{
+ ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */
+ u8 res0[0x60];
+ u32 cs_config[4]; /**< Chip Select x Configuration */
+#define CSCONFIG_EN 0x80000000
+#define CSCONFIG_AP 0x00800000
+#define CSCONFIG_ROW_BIT 0x00000700
+#define CSCONFIG_ROW_BIT_12 0x00000000
+#define CSCONFIG_ROW_BIT_13 0x00000100
+#define CSCONFIG_ROW_BIT_14 0x00000200
+#define CSCONFIG_COL_BIT 0x00000007
+#define CSCONFIG_COL_BIT_8 0x00000000
+#define CSCONFIG_COL_BIT_9 0x00000001
+#define CSCONFIG_COL_BIT_10 0x00000002
+#define CSCONFIG_COL_BIT_11 0x00000003
+ u8 res1[0x78];
+ u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */
+#define TIMING_CFG1_PRETOACT 0x70000000
+#define TIMING_CFG1_PRETOACT_SHIFT 28
+#define TIMING_CFG1_ACTTOPRE 0x0F000000
+#define TIMING_CFG1_ACTTOPRE_SHIFT 24
+#define TIMING_CFG1_ACTTORW 0x00700000
+#define TIMING_CFG1_ACTTORW_SHIFT 20
+#define TIMING_CFG1_CASLAT 0x00070000
+#define TIMING_CFG1_CASLAT_SHIFT 16
+#define TIMING_CFG1_REFREC 0x0000F000
+#define TIMING_CFG1_REFREC_SHIFT 12
+#define TIMING_CFG1_WRREC 0x00000700
+#define TIMING_CFG1_WRREC_SHIFT 8
+#define TIMING_CFG1_ACTTOACT 0x00000070
+#define TIMING_CFG1_ACTTOACT_SHIFT 4
+#define TIMING_CFG1_WRTORD 0x00000007
+#define TIMING_CFG1_WRTORD_SHIFT 0
+
+ u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */
+#define TIMING_CFG2_CPO 0x0F000000
+#define TIMING_CFG2_CPO_SHIFT 24
+#define TIMING_CFG2_ACSM 0x00080000
+#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
+#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
+
+ u32 sdram_cfg; /**< SDRAM Control Configuration */
+#define SDRAM_CFG_MEM_EN 0x80000000
+#define SDRAM_CFG_SREN 0x40000000
+#define SDRAM_CFG_ECC_EN 0x20000000
+#define SDRAM_CFG_RD_EN 0x10000000
+#define SDRAM_CFG_SDRAM_TYPE 0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
+#define SDRAM_CFG_DYN_PWR 0x00200000
+#define SDRAM_CFG_32_BE 0x00080000
+#define SDRAM_CFG_8_BE 0x00040000
+#define SDRAM_CFG_NCAP 0x00020000
+#define SDRAM_CFG_2T_EN 0x00008000
+
+ u8 res2[4];
+ u32 sdram_mode; /**< SDRAM Mode Configuration */
+#define SDRAM_MODE_ESD 0xFFFF0000
+#define SDRAM_MODE_ESD_SHIFT 16
+#define SDRAM_MODE_SD 0x0000FFFF
+#define SDRAM_MODE_SD_SHIFT 0
+
+ u8 res3[8];
+ u32 sdram_interval; /**< SDRAM Interval Configuration */
+#define SDRAM_INTERVAL_REFINT 0x3FFF0000
+#define SDRAM_INTERVAL_REFINT_SHIFT 16
+#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
+#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0
+ u8 res9[8];
+ u32 sdram_clk_cntl;
+ u8 res4[0xCCC];
+ u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
+ u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
+ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */
+ u8 res5[0x14];
+ u32 capture_data_hi; /**< Memory Data Path Read Capture High */
+ u32 capture_data_lo; /**< Memory Data Path Read Capture Low */
+ u32 capture_ecc; /**< Memory Data Path Read Capture ECC */
+ u8 res6[0x14];
+ u32 err_detect; /**< Memory Error Detect */
+ u32 err_disable; /**< Memory Error Disable */
+ u32 err_int_en; /**< Memory Error Interrupt Enable */
+ u32 capture_attributes; /**< Memory Error Attributes Capture */
+ u32 capture_address; /**< Memory Error Address Capture */
+ u32 capture_ext_address;/**< Memory Error Extended Address Capture */
+ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */
+ u8 res7[0xA4];
+ u32 debug_reg;
+ u8 res8[0xFC];
+} ddr8349_t;
+
+/*
+ * I2C1 Controller
+ */
+
+
+/*
+ * DUART
+ */
+typedef struct duart8349{
+ u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
+ u8 uier_udmb; /**< combined register for UIER and UDMB */
+ u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
+ u8 ulcr; /**< line control register */
+ u8 umcr; /**< MODEM control register */
+ u8 ulsr; /**< line status register */
+ u8 umsr; /**< MODEM status register */
+ u8 uscr; /**< scratch register */
+ u8 res0[8];
+ u8 udsr; /**< DMA status register */
+ u8 res1[3];
+ u8 res2[0xEC];
+} duart8349_t;
+
+/*
+ * Local Bus Controller Registers
+ */
+typedef struct lbus_bank{
+ u32 br; /**< Base Register */
+ u32 or; /**< Base Register */
+} lbus_bank_t;
+
+typedef struct lbus8349 {
+ lbus_bank_t bank[8];
+ u8 res0[0x28];
+ u32 mar; /**< UPM Address Register */
+ u8 res1[0x4];
+ u32 mamr; /**< UPMA Mode Register */
+ u32 mbmr; /**< UPMB Mode Register */
+ u32 mcmr; /**< UPMC Mode Register */
+ u8 res2[0x8];
+ u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */
+ u32 mdr; /**< UPM Data Register */
+ u8 res3[0x8];
+ u32 lsdmr; /**< SDRAM Mode Register */
+ u8 res4[0x8];
+ u32 lurt; /**< UPM Refresh Timer */
+ u32 lsrt; /**< SDRAM Refresh Timer */
+ u8 res5[0x8];
+ u32 ltesr; /**< Transfer Error Status Register */
+ u32 ltedr; /**< Transfer Error Disable Register */
+ u32 lteir; /**< Transfer Error Interrupt Register */
+ u32 lteatr; /**< Transfer Error Attributes Register */
+ u32 ltear; /**< Transfer Error Address Register */
+ u8 res6[0xC];
+ u32 lbcr; /**< Configuration Register */
+#define LBCR_LDIS 0x80000000
+#define LBCR_LDIS_SHIFT 31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT 22
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT 17
+#define LBCR_EPAR 0x00010000
+#define LBCR_EPAR_SHIFT 16
+#define LBCR_BMT 0x0000FF00
+#define LBCR_BMT_SHIFT 8
+ u32 lcrr; /**< Clock Ratio Register */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_CLKDIV 0x0000000F
+#define LCRR_CLKDIV_SHIFT 0
+
+
+ u8 res7[0x28];
+ u8 res8[0xF00];
+} lbus8349_t;
+
+/*
+ * Serial Peripheral Interface
+ */
+typedef struct spi8349
+{
+ u32 mode; /**< mode register */
+ u32 event; /**< event register */
+ u32 mask; /**< mask register */
+ u32 com; /**< command register */
+ u8 res0[0x10];
+ u32 tx; /**< transmit register */
+ u32 rx; /**< receive register */
+ u8 res1[0xD8];
+} spi8349_t;
+
+typedef struct dma8349 {
+ u8 fixme[0x300];
+} dma8349_t;
+
+/*
+ * PCI Software Configuration Registers
+ */
+typedef struct pciconf8349 {
+ u32 config_address;
+#define PCI_CONFIG_ADDRESS_EN 0x80000000
+#define PCI_CONFIG_ADDRESS_BN_SHIFT 16
+#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000
+#define PCI_CONFIG_ADDRESS_DN_SHIFT 11
+#define PCI_CONFIG_ADDRESS_DN_MASK 0x0000f800
+#define PCI_CONFIG_ADDRESS_FN_SHIFT 8
+#define PCI_CONFIG_ADDRESS_FN_MASK 0x00000700
+#define PCI_CONFIG_ADDRESS_RN_SHIFT 0
+#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc
+ u32 config_data;
+ u32 int_ack;
+ u8 res[116];
+} pciconf8349_t;
+
+/*
+ * PCI Outbound Translation Register
+ */
+typedef struct pci_outbound_window {
+ u32 potar;
+ u8 res0[4];
+ u32 pobar;
+ u8 res1[4];
+ u32 pocmr;
+ u8 res2[4];
+} pot8349_t;
+/*
+ * Sequencer
+ */
+typedef struct ios8349 {
+ pot8349_t pot[6];
+#define POTAR_TA_MASK 0x000fffff
+#define POBAR_BA_MASK 0x000fffff
+#define POCMR_EN 0x80000000
+#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */
+#define POCMR_SE 0x20000000 /* streaming enable */
+#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2*/
+#define POCMR_CM_MASK 0x000fffff
+#define POCMR_CM_4G 0x00000000
+#define POCMR_CM_2G 0x00080000
+#define POCMR_CM_1G 0x000C0000
+#define POCMR_CM_512M 0x000E0000
+#define POCMR_CM_256M 0x000F0000
+#define POCMR_CM_128M 0x000F8000
+#define POCMR_CM_64M 0x000FC000
+#define POCMR_CM_32M 0x000FE000
+#define POCMR_CM_16M 0x000FF000
+#define POCMR_CM_8M 0x000FF800
+#define POCMR_CM_4M 0x000FFC00
+#define POCMR_CM_2M 0x000FFE00
+#define POCMR_CM_1M 0x000FFF00
+#define POCMR_CM_512K 0x000FFF80
+#define POCMR_CM_256K 0x000FFFC0
+#define POCMR_CM_128K 0x000FFFE0
+#define POCMR_CM_64K 0x000FFFF0
+#define POCMR_CM_32K 0x000FFFF8
+#define POCMR_CM_16K 0x000FFFFC
+#define POCMR_CM_8K 0x000FFFFE
+#define POCMR_CM_4K 0x000FFFFF
+ u8 res0[0x60];
+ u32 pmcr;
+ u8 res1[4];
+ u32 dtcr;
+ u8 res2[4];
+} ios8349_t;
+
+/*
+ * PCI Controller Control and Status Registers
+ */
+typedef struct pcictrl8349 {
+ u32 esr;
+#define ESR_MERR 0x80000000
+#define ESR_APAR 0x00000400
+#define ESR_PCISERR 0x00000200
+#define ESR_MPERR 0x00000100
+#define ESR_TPERR 0x00000080
+#define ESR_NORSP 0x00000040
+#define ESR_TABT 0x00000020
+ u32 ecdr;
+#define ECDR_APAR 0x00000400
+#define ECDR_PCISERR 0x00000200
+#define ECDR_MPERR 0x00000100
+#define ECDR_TPERR 0x00000080
+#define ECDR_NORSP 0x00000040
+#define ECDR_TABT 0x00000020
+ u32 eer;
+#define EER_APAR 0x00000400
+#define EER_PCISERR 0x00000200
+#define EER_MPERR 0x00000100
+#define EER_TPERR 0x00000080
+#define EER_NORSP 0x00000040
+#define EER_TABT 0x00000020
+ u32 eatcr;
+#define EATCR_ERRTYPR_MASK 0x70000000
+#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */
+#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */
+#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */
+#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */
+#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */
+#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */
+#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */
+#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */
+#define EATCR_BN_MASK 0x0f000000 /* beat number */
+#define EATCR_BN_1st 0x00000000
+#define EATCR_BN_2ed 0x01000000
+#define EATCR_BN_3rd 0x02000000
+#define EATCR_BN_4th 0x03000000
+#define EATCR_BN_5th 0x0400000
+#define EATCR_BN_6th 0x05000000
+#define EATCR_BN_7th 0x06000000
+#define EATCR_BN_8th 0x07000000
+#define EATCR_BN_9th 0x08000000
+#define EATCR_TS_MASK 0x00300000 /* transaction size */
+#define EATCR_TS_4 0x00000000
+#define EATCR_TS_1 0x00100000
+#define EATCR_TS_2 0x00200000
+#define EATCR_TS_3 0x00300000
+#define EATCR_ES_MASK 0x000f0000 /* error source */
+#define EATCR_ES_EM 0x00000000 /* external master */
+#define EATCR_ES_DMA 0x00050000
+#define EATCR_CMD_MASK 0x0000f000
+#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/
+#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */
+#define EATCR_HPB 0x00000004 /* high parity bit */
+#define EATCR_PB 0x00000002 /* parity bit*/
+#define EATCR_VI 0x00000001 /* error information valid */
+ u32 eacr;
+ u32 eeacr;
+ u32 edlcr;
+ u32 edhcr;
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
+#define PITAR_TA_MASK 0x000fffff
+#define PIBAR_MASK 0xffffffff
+#define PIEBAR_EBA_MASK 0x000fffff
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_RTT_MASK 0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP 0x00050000
+#define PIWAR_WTT_MASK 0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP 0x00005000
+#define PIWAR_IWS_MASK 0x0000003F
+#define PIWAR_IWS_4K 0x0000000B
+#define PIWAR_IWS_8K 0x0000000C
+#define PIWAR_IWS_16K 0x0000000D
+#define PIWAR_IWS_32K 0x0000000E
+#define PIWAR_IWS_64K 0x0000000F
+#define PIWAR_IWS_128K 0x00000010
+#define PIWAR_IWS_256K 0x00000011
+#define PIWAR_IWS_512K 0x00000012
+#define PIWAR_IWS_1M 0x00000013
+#define PIWAR_IWS_2M 0x00000014
+#define PIWAR_IWS_4M 0x00000015
+#define PIWAR_IWS_8M 0x00000016
+#define PIWAR_IWS_16M 0x00000017
+#define PIWAR_IWS_32M 0x00000018
+#define PIWAR_IWS_64M 0x00000019
+#define PIWAR_IWS_128M 0x0000001A
+#define PIWAR_IWS_256M 0x0000001B
+#define PIWAR_IWS_512M 0x0000001C
+#define PIWAR_IWS_1G 0x0000001D
+#define PIWAR_IWS_2G 0x0000001E
+} pcictrl8349_t;
+
+/*
+ * USB
+ */
+typedef struct usb8349 {
+ u8 fixme[0x2000];
+} usb8349_t;
+
+/*
+ * TSEC
+ */
+typedef struct tsec8349 {
+ u8 fixme[0x1000];
+} tsec8349_t;
+
+/*
+ * Security
+ */
+typedef struct security8349 {
+ u8 fixme[0x10000];
+} security8349_t;
+
+typedef struct immap {
+ sysconf8349_t sysconf; /* System configuration */
+ wdt8349_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk8349_t rtc; /* Real Time Clock Module Registers */
+ rtclk8349_t pit; /* Periodic Interval Timer */
+ gtm8349_t gtm[2]; /* Global Timers Module */
+ ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter8349_t arbiter; /* System Arbiter Registers */
+ reset8349_t reset; /* Reset Module */
+ clk8349_t clk; /* System Clock Module */
+ pmc8349_t pmc; /* Power Management Control Module */
+ gpio8349_t pgio[2]; /* general purpose I/O module */
+ u8 res0[0x200];
+ u8 DDL_DDR[0x100];
+ u8 DDL_LBIU[0x100];
+ u8 res1[0xE00];
+ ddr8349_t ddr; /* DDR Memory Controller Memory */
+ i2c_t i2c[2]; /* I2C1 Controller */
+ u8 res2[0x1300];
+ duart8349_t duart[2];/* DUART */
+ u8 res3[0x900];
+ lbus8349_t lbus; /* Local Bus Controller Registers */
+ u8 res4[0x1000];
+ spi8349_t spi; /* Serial Peripheral Interface */
+ u8 res5[0xF00];
+ dma8349_t dma; /* DMA */
+ pciconf8349_t pci_conf[2]; /* PCI Software Configuration Registers */
+ ios8349_t ios; /* Sequencer */
+ pcictrl8349_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
+ u8 res6[0x19900];
+ usb8349_t usb;
+ tsec8349_t tsec[2];
+ u8 res7[0xA000];
+ security8349_t security;
+} immap_t;
+
+#endif /* __IMMAP_8349__ */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 1b73def..2f10e95 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -9,9 +9,9 @@
#ifndef __IMMAP_85xx__
#define __IMMAP_85xx__
-
-/* Local-Access Registers and ECM Registers(0x0000-0x2000) */
-
+/*
+ * Local-Access Registers and ECM Registers(0x0000-0x2000)
+ */
typedef struct ccsr_local_ecm {
uint ccsrbar; /* 0x0 - Control Configuration Status Registers Base Address Register */
char res1[4];
@@ -65,9 +65,9 @@ typedef struct ccsr_local_ecm {
char res24[492];
} ccsr_local_ecm_t;
-
-/* DDR memory controller registers(0x2000-0x3000) */
-
+/*
+ * DDR memory controller registers(0x2000-0x3000)
+ */
typedef struct ccsr_ddr {
uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */
char res1[4];
@@ -81,21 +81,27 @@ typedef struct ccsr_ddr {
uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */
uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */
uint cs3_config; /* 0x208c - DDR Chip Select Configuration */
- char res5[120];
+ char res5[112];
+ uint ext_refrec; /* 0x2100 - DDR SDRAM Extended Refresh Recovery */
+ uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */
uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */
uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */
uint sdram_cfg; /* 0x2110 - DDR SDRAM Control Configuration */
- char res6[4];
+ uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */
uint sdram_mode; /* 0x2118 - DDR SDRAM Mode Configuration */
- char res7[8];
+ uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2*/
+ uint sdram_md_cntl; /* 0x2120 - DDR SDRAM Mode Control */
uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */
-#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
- char res7_5[8];
+ uint sdram_data_init; /* 0x2128 - DDR SDRAM Data initialization */
+ char res6[4];
uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */
- char res8[3276];
-#else
- char res8[3288];
-#endif
+ char res7[20];
+ uint init_address; /* 0x2148 - DDR training initialization address */
+ uint init_ext_address; /* 0x214C - DDR training initialization extended address */
+ char res8_1[2728];
+ uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */
+ uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */
+ char res8_2[512];
uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */
uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */
uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */
@@ -119,9 +125,9 @@ typedef struct ccsr_ddr {
char res12[240];
} ccsr_ddr_t;
-
-/* I2C Registers(0x3000-0x4000) */
-
+/*
+ * I2C Registers(0x3000-0x4000)
+ */
typedef struct ccsr_i2c {
u_char i2cadr; /* 0x3000 - I2C Address Register */
#define MPC85xx_I2CADR_MASK 0xFE
@@ -158,6 +164,7 @@ typedef struct ccsr_i2c {
#if defined(CONFIG_MPC8540) \
|| defined(CONFIG_MPC8541) \
+ || defined(CONFIG_MPC8548) \
|| defined(CONFIG_MPC8555)
/* DUART Registers(0x4000-0x5000) */
typedef struct ccsr_duart {
@@ -237,10 +244,10 @@ typedef struct ccsr_lbc {
char res8[12072];
} ccsr_lbc_t;
-
-/* PCI Registers(0x8000-0x9000) */
-/* Omitting Reserved(0x9000-0x2_0000) */
-
+/*
+ * PCI Registers(0x8000-0x9000)
+ * Omitting Reserved(0x9000-0x2_0000)
+ */
typedef struct ccsr_pcix {
uint cfg_addr; /* 0x8000 - PCIX Configuration Address Register */
uint cfg_data; /* 0x8004 - PCIX Configuration Data Register */
@@ -305,9 +312,9 @@ typedef struct ccsr_pcix {
char res11[94688];
} ccsr_pcix_t;
-
-/* L2 Cache Registers(0x2_0000-0x2_1000) */
-
+/*
+ * L2 Cache Registers(0x2_0000-0x2_1000)
+ */
typedef struct ccsr_l2cache {
uint l2ctl; /* 0x20000 - L2 configuration register 0 */
char res1[12];
@@ -349,9 +356,9 @@ typedef struct ccsr_l2cache {
char res15[420];
} ccsr_l2cache_t;
-
-/* DMA Registers(0x2_1000-0x2_2000) */
-
+/*
+ * DMA Registers(0x2_1000-0x2_2000)
+ */
typedef struct ccsr_dma {
char res1[256];
uint mr0; /* 0x21100 - DMA 0 Mode Register */
@@ -430,7 +437,9 @@ typedef struct ccsr_dma {
char res22[11516];
} ccsr_dma_t;
-/* tsec1 tsec2: 24000-26000 */
+/*
+ * tsec1 tsec2: 24000-26000
+ */
typedef struct ccsr_tsec {
char res1[16];
uint ievent; /* 0x24010 - Interrupt Event Register */
@@ -717,8 +726,9 @@ typedef struct ccsr_tsec {
char res74[1024];
} ccsr_tsec_t;
-/* PIC Registers(0x2_6000-0x4_0000-0x8_0000) */
-
+/*
+ * PIC Registers(0x2_6000-0x4_0000-0x8_0000)
+ */
typedef struct ccsr_pic {
char res0[106496]; /* 0x26000-0x40000 */
char res1[64];
@@ -1024,17 +1034,18 @@ typedef struct ccsr_pic {
char res150[130892];
} ccsr_pic_t;
-/* CPM Block(0x8_0000-0xc_0000) */
-#if defined(CONFIG_MPC8540) \
- || defined(CONFIG_MPC8541) \
- || defined(CONFIG_MPC8555)
+/*
+ * CPM Block(0x8_0000-0xc_0000)
+ */
+#ifndef CONFIG_CPM2
typedef struct ccsr_cpm {
char res[262144];
} ccsr_cpm_t;
#else
-/* 0x8000-0x8ffff:DPARM */
-
-/* 0x9000-0x90bff: General SIU */
+/*
+ * 0x8000-0x8ffff:DPARM
+ * 0x9000-0x90bff: General SIU
+ */
typedef struct ccsr_cpm_siu {
char res1[80];
uint smaer;
@@ -1325,7 +1336,6 @@ typedef struct ccsr_cpm {
char res1[16*1024];
u_char im_dpram2[16*1024];
char res2[16*1024];
-
ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
ccsr_cpm_intctl_t im_cpm_intctl; /* Interrupt Controller */
ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
@@ -1350,8 +1360,10 @@ typedef struct ccsr_cpm {
ccsr_cpm_iram_t im_cpm_iram;
} ccsr_cpm_t;
#endif
-/* RapidIO Registers(0xc_0000-0xe_0000) */
+/*
+ * RapidIO Registers(0xc_0000-0xe_0000)
+ */
typedef struct ccsr_rio {
uint didcar; /* 0xc0000 - Device Identity Capability Register */
uint dicar; /* 0xc0004 - Device Information Capability Register */
@@ -1517,7 +1529,9 @@ typedef struct ccsr_rio {
char res58[60176];
} ccsr_rio_t;
-/* Global Utilities Register Block(0xe_0000-0xf_ffff) */
+/*
+ * Global Utilities Register Block(0xe_0000-0xf_ffff)
+ */
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
@@ -1549,7 +1563,13 @@ typedef struct ccsr_gur {
uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
char res12[12];
uint lbcdllcr; /* 0xe0e20 - LBC DLL control register */
- char res13[61915];
+ char res13[248];
+ uint lbiuiplldcr0; /* 0xe0f1c -- LBIU PLL Debug Reg 0 */
+ uint lbiuiplldcr1; /* 0xe0f20 -- LBIU PLL Debug Reg 1 */
+ uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */
+ uint res14; /* 0xe0f28 */
+ uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */
+ char res15[61651];
} ccsr_gur_t;
typedef struct immap {
diff --git a/include/asm-ppc/mpc8349_pci.h b/include/asm-ppc/mpc8349_pci.h
new file mode 100644
index 0000000..48255a3
--- /dev/null
+++ b/include/asm-ppc/mpc8349_pci.h
@@ -0,0 +1,167 @@
+#ifndef _PPC_KERNEL_MPC8349_PCI_H
+#define _PPC_KERNEL_MPC8349_PCI_H
+
+
+#define M8265_PCIBR0 0x101ac
+#define M8265_PCIBR1 0x101b0
+#define M8265_PCIMSK0 0x101c4
+#define M8265_PCIMSK1 0x101c8
+
+/* Bit definitions for PCIBR registers */
+
+#define PCIBR_ENABLE 0x00000001
+
+/* Bit definitions for PCIMSK registers */
+
+#define PCIMSK_32KB 0xFFFF8000 /* Size of window, smallest */
+#define PCIMSK_64KB 0xFFFF0000
+#define PCIMSK_128KB 0xFFFE0000
+#define PCIMSK_256KB 0xFFFC0000
+#define PCIMSK_512KB 0xFFF80000
+#define PCIMSK_1MB 0xFFF00000
+#define PCIMSK_2MB 0xFFE00000
+#define PCIMSK_4MB 0xFFC00000
+#define PCIMSK_8MB 0xFF800000
+#define PCIMSK_16MB 0xFF000000
+#define PCIMSK_32MB 0xFE000000
+#define PCIMSK_64MB 0xFC000000
+#define PCIMSK_128MB 0xF8000000
+#define PCIMSK_256MB 0xF0000000
+#define PCIMSK_512MB 0xE0000000
+#define PCIMSK_1GB 0xC0000000 /* Size of window, largest */
+
+
+#define M826X_SCCR_PCI_MODE_EN 0x100
+
+
+/*
+ * Outbound ATU registers (3 sets). These registers control how 60x bus
+ * (local) addresses are translated to PCI addresses when the MPC826x is
+ * a PCI bus master (initiator).
+ */
+
+#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
+#define POTAR_REG1 0x10818
+#define POTAR_REG2 0x10830
+
+#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
+#define POBAR_REG1 0x10820
+#define POBAR_REG2 0x10838
+
+#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
+#define POCMR_REG1 0x10828
+#define POCMR_REG2 0x10840
+
+/* Bit definitions for POMCR registers */
+
+#define POCMR_MASK_4KB 0x000FFFFF
+#define POCMR_MASK_8KB 0x000FFFFE
+#define POCMR_MASK_16KB 0x000FFFFC
+#define POCMR_MASK_32KB 0x000FFFF8
+#define POCMR_MASK_64KB 0x000FFFF0
+#define POCMR_MASK_128KB 0x000FFFE0
+#define POCMR_MASK_256KB 0x000FFFC0
+#define POCMR_MASK_512KB 0x000FFF80
+#define POCMR_MASK_1MB 0x000FFF00
+#define POCMR_MASK_2MB 0x000FFE00
+#define POCMR_MASK_4MB 0x000FFC00
+#define POCMR_MASK_8MB 0x000FF800
+#define POCMR_MASK_16MB 0x000FF000
+#define POCMR_MASK_32MB 0x000FE000
+#define POCMR_MASK_64MB 0x000FC000
+#define POCMR_MASK_128MB 0x000F8000
+#define POCMR_MASK_256MB 0x000F0000
+#define POCMR_MASK_512MB 0x000E0000
+#define POCMR_MASK_1GB 0x000C0000
+
+#define POCMR_ENABLE 0x80000000
+#define POCMR_PCI_IO 0x40000000
+#define POCMR_PREFETCH_EN 0x20000000
+
+/* Soft PCI reset */
+
+#define PCI_GCR_REG 0x10880
+
+/* Bit definitions for PCI_GCR registers */
+
+#define PCIGCR_PCI_BUS_EN 0x1
+
+/*
+ * Inbound ATU registers (2 sets). These registers control how PCI
+ * addresses are translated to 60x bus (local) addresses when the
+ * MPC826x is a PCI bus target.
+ */
+
+#define PITAR_REG1 0x108D0
+#define PIBAR_REG1 0x108D8
+#define PICMR_REG1 0x108E0
+#define PITAR_REG0 0x108E8
+#define PIBAR_REG0 0x108F0
+#define PICMR_REG0 0x108F8
+
+/* Bit definitions for PCI Inbound Comparison Mask registers */
+
+#define PICMR_MASK_4KB 0x000FFFFF
+#define PICMR_MASK_8KB 0x000FFFFE
+#define PICMR_MASK_16KB 0x000FFFFC
+#define PICMR_MASK_32KB 0x000FFFF8
+#define PICMR_MASK_64KB 0x000FFFF0
+#define PICMR_MASK_128KB 0x000FFFE0
+#define PICMR_MASK_256KB 0x000FFFC0
+#define PICMR_MASK_512KB 0x000FFF80
+#define PICMR_MASK_1MB 0x000FFF00
+#define PICMR_MASK_2MB 0x000FFE00
+#define PICMR_MASK_4MB 0x000FFC00
+#define PICMR_MASK_8MB 0x000FF800
+#define PICMR_MASK_16MB 0x000FF000
+#define PICMR_MASK_32MB 0x000FE000
+#define PICMR_MASK_64MB 0x000FC000
+#define PICMR_MASK_128MB 0x000F8000
+#define PICMR_MASK_256MB 0x000F0000
+#define PICMR_MASK_512MB 0x000E0000
+#define PICMR_MASK_1GB 0x000C0000
+
+#define PICMR_ENABLE 0x80000000
+#define PICMR_NO_SNOOP_EN 0x40000000
+#define PICMR_PREFETCH_EN 0x20000000
+
+/* PCI error Registers */
+
+#define PCI_ERROR_STATUS_REG 0x10884
+#define PCI_ERROR_MASK_REG 0x10888
+#define PCI_ERROR_CONTROL_REG 0x1088C
+#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
+#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
+#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
+
+/* PCI error Register bit defines */
+
+#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
+#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
+#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
+#define PCI_ERROR_PCI_NO_RSP 0x00000008
+#define PCI_ERROR_PCI_TAR_ABT 0x00000010
+#define PCI_ERROR_PCI_SERR 0x00000020
+#define PCI_ERROR_PCI_PERR_RD 0x00000040
+#define PCI_ERROR_PCI_PERR_WR 0x00000080
+#define PCI_ERROR_I2O_OFQO 0x00000100
+#define PCI_ERROR_I2O_IPQO 0x00000200
+#define PCI_ERROR_IRA 0x00000400
+#define PCI_ERROR_NMI 0x00000800
+#define PCI_ERROR_I2O_DBMC 0x00001000
+
+/*
+ * Register pair used to generate configuration cycles on the PCI bus
+ * and access the MPC826x's own PCI configuration registers.
+ */
+
+#define PCI_CFG_ADDR_REG 0x10900
+#define PCI_CFG_DATA_REG 0x10904
+
+/* Bus parking decides where the bus control sits when idle */
+/* If modifying memory controllers for PCI park on the core */
+
+#define PPC_ACR_BUS_PARK_CORE 0x6
+#define PPC_ACR_BUS_PARK_PCI 0x3
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 806085e..6b131b6 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -200,6 +200,11 @@
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+
+#define HID0_ICE_SHIFT 15
+#define HID0_DCE_SHIFT 14
+#define HID0_DLOCK_SHIFT 12
+
#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
@@ -211,10 +216,10 @@
#define HID0_NAP (1<<22)
#define HID0_SLEEP (1<<21)
#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ICE (1<<HID0_ICE_SHIFT) /* Instruction Cache Enable */
+#define HID0_DCE (1<<HID0_DCE_SHIFT) /* Data Cache Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_DLOCK (1<<HID0_DLOCK_SHIFT) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
#define HID0_DCI HID0_DCFI
@@ -420,6 +425,7 @@
#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
+#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */
#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
@@ -584,6 +590,7 @@
#define MAS4 SPRN_MAS4
#define MAS5 SPRN_MAS5
#define MAS6 SPRN_MAS6
+#define MAS7 SPRN_MAS7
/* Device Control Registers */
@@ -794,6 +801,8 @@
#define SVR_8560 0x8070
#define SVR_8555 0x8079
#define SVR_8541 0x807A
+#define SVR_8548 0x8031
+#define SVR_8548_E 0x8039
/* I am just adding a single entry for 8260 boards. I think we may be
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index a759315..5b6cd6f 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -45,6 +45,9 @@ typedef struct bd_info {
#if defined(CONFIG_MPC5xxx)
unsigned long bi_mbar_base; /* base of internal registers */
#endif
+#if defined(CONFIG_MPC83XX)
+ unsigned long bi_immrbar;
+#endif
#if defined(CONFIG_MPC8220)
unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_inpfreq; /* Input Freq, In MHz */
@@ -59,7 +62,7 @@ typedef struct bd_info {
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
-#if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
diff --git a/include/common.h b/include/common.h
index 625c389..efc638d 100644
--- a/include/common.h
+++ b/include/common.h
@@ -83,6 +83,10 @@ typedef volatile unsigned char vu_char;
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
#endif
+#ifdef CONFIG_MPC83XX
+#include <mpc83xx.h>
+#include <asm/immap_83xx.h>
+#endif
#ifdef CONFIG_4xx
#include <ppc4xx.h>
#endif
@@ -409,8 +413,9 @@ int sdram_adjust_866 (void);
int adjust_sdram_tbs_8xx (void);
#if defined(CONFIG_8260)
int prt_8260_clks (void);
-#endif
-#if defined(CONFIG_MPC5xxx)
+#elif defined(CONFIG_MPC83XX)
+int print_clock_conf(void);
+#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
#if defined(CONFIG_MPC8220)
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index ce7ccc2..09185b1 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_CPU86 1 /* ...on a CPU86 board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/*
* select serial console configuration
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 0e0876f..c50870f 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -36,6 +36,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_CPU87 1 /* ...on a CPU87 board */
#define CONFIG_PCI
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/*
* select serial console configuration
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index c4fb01d..729b048 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -37,6 +37,7 @@
#define CONFIG_MPC8272_FAMILY 1
#define CONFIG_IDS8247 1
#define CPU_ID_STR "MPC8247"
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 6b7079e..c1565fc 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -40,6 +40,8 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_IPHASE4539 1 /* ...on a Interphase 4539 PMC */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+
/*-----------------------------------------------------------------------
* select serial console configuration
*
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 8aa18ca..65056a2 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -31,6 +31,7 @@
#define CONFIG_MPC8260 /* This is an MPC8260 CPU */
#define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/*-----------------------------------------------------------------------
* Select serial console configuration
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index ed8fe6b..bba476a 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -42,6 +42,8 @@
#define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+
/*
* Figure out if we are booting low via flash HRCW or high via the BCSR.
*/
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 89f2d09..d8e91a5 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -51,6 +51,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_MPC8266ADS 1 /* ...on motorola ADS board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h
new file mode 100644
index 0000000..d6d2fab
--- /dev/null
+++ b/include/configs/MPC8349ADS.h
@@ -0,0 +1,584 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8349ads board configuration file
+ *
+ * Please refer to doc/README.mpc83xxads for more info.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+#define CONFIG_MII
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 Family */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC8349 1 /* MPC8349 specific */
+#define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */
+
+/* FIXME: Real PCI support will come in a follow-up update. */
+#undef CONFIG_PCI
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
+
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
+#else
+#define CONFIG_83XX_CLKIN 33000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ 66000000
+#else
+#define CONFIG_SYS_CLK_FREQ 33000000
+#endif
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+#define CFG_IMMRBAR 0xE0000000
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00000000 /* memtest region */
+#define CFG_MEMTEST_END 0x00100000
+
+/*
+ * DDR Setup
+ */
+
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#undef CONFIG_DDR_2T_TIMING
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+ /*
+ * Determine DDR configuration from I2C interface.
+ */
+ #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+#else
+ /*
+ * Manually set up DDR parameters
+ */
+ #define CFG_DDR_SIZE 256 /* Mb */
+ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+ #define CFG_DDR_TIMING_1 0x37344321
+ #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
+ #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
+ #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
+ #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
+#endif
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
+#define CFG_FLASH_SIZE 8 /* FLASH size in MB */
+/* #define CFG_FLASH_USE_BUFFER_WRITE */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 32 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM 0xff806ff7 /* 16Mb Flash size*/
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 16Mb window size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MID_FLASH_JUMP 0x7F000000
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+/*
+ * BCSR register on local bus 32KB, 8-bit wide for ADS config reg
+ */
+#define CFG_BCSR 0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
+#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM 0xFFFFE8f0 /* length 32K */
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ * LCRR: DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR 0x00000000
+
+#define CFG_LB_SDRAM /* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port-size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/
+#define CFG_LBLAWBAR2_PRELIM 0xF0000000
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
+#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \
+ | CFG_LBC_LSDMR_BSMA1516 \
+ | CFG_LBC_LSDMR_RFCR8 \
+ | CFG_LBC_LSDMR_PRETOACT6 \
+ | CFG_LBC_LSDMR_ACTTORW3 \
+ | CFG_LBC_LSDMR_BL8 \
+ | CFG_LBC_LSDMR_WRC3 \
+ | CFG_LBC_LSDMR_CL3 \
+ )
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/* TSEC */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+
+/* IO Configuration */
+#define CFG_IO_CONF (\
+ IO_CONF_UART |\
+ IO_CONF_TSEC1 |\
+ IO_CONF_IRQ0 |\
+ IO_CONF_IRQ1 |\
+ IO_CONF_IRQ2 |\
+ IO_CONF_IRQ3 |\
+ IO_CONF_IRQ4 |\
+ IO_CONF_IRQ5 |\
+ IO_CONF_IRQ6 |\
+ IO_CONF_IRQ7 )
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+
+#define CFG_PCI2_MEM_BASE 0xA0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe3000000
+#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#if defined(CONFIG_PCI)
+
+#define PCI_ALL_PCI1
+#if defined(PCI_64BIT)
+#undef PCI_ALL_PCI1
+#undef PCI_TWO_PCI1
+#undef PCI_ONE_PCI1
+#endif
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xFIXME
+ #define PCI_ENET0_MEMADDR 0xFIXME
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_GMII 1 /* MII PHY management */
+#define CONFIG_MPC83XX_TSEC1 1
+#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
+#define CONFIG_MPC83XX_TSEC2 1
+#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
+
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_PCI \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C) \
+ & \
+ ~(CFG_CMD_ENV \
+ | CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII \
+ )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */
+
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#if defined(PCI_64BIT)
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_64_BIT_PCI |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCI2_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_TSEC1M_IN_GMII |\
+ HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_32_BIT_PCI |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_PCI2_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_TSEC1M_IN_GMII |\
+ HRCWH_TSEC2M_IN_GMII )
+#endif
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+/* #define CFG_HID0_FINAL (\
+ HID0_ENABLE_INSTRUCTION_CACHE |\
+ HID0_ENABLE_M_BIT |\
+ HID0_ENABLE_ADDRESS_BROADCAST ) */
+
+#define CFG_HID2 0x000000000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 00:04:9f:11:22:33
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:7D:01
+#endif
+
+#define CONFIG_IPADDR 192.168.1.253
+
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE your.uImage
+
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=400000\0" \
+ "ramdiskfile=ramfs.83xx\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 1c11c6f..131c832 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -41,14 +41,20 @@
#define CONFIG_MPC8540 1 /* MPC8540 specific */
#define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific */
+#ifndef CONFIG_HAS_FEC
+#define CONFIG_HAS_FEC 1 /* 8540 has FEC */
+#endif
+
#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
/*
* sysclk for MPC85xx
@@ -338,17 +344,24 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
+
+#if CONFIG_HAS_FEC
#define CONFIG_MPC85XX_FEC 1
+#define CONFIG_MPC85XX_FEC_NAME "FEC"
#define FEC_PHY_ADDR 3
#define FEC_PHYIDX 0
+#endif
-#define CONFIG_ETHPRIME "MOTO ENET0"
+/* Options are: TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME "TSEC0"
#endif /* CONFIG_TSEC_ENET */
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
new file mode 100644
index 0000000..1af9231
--- /dev/null
+++ b/include/configs/MPC8540EVAL.h
@@ -0,0 +1,347 @@
+/*
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Modified by Lunsheng Wang, lunsheng@sohu.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8540eval board configuration file */
+/* please refer to doc/README.mpc85xxads for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
+#define CONFIG_MPC8540 1 /* MPC8540 specific */
+#define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */
+
+#undef CONFIG_PCI /* pci ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_DDR_DLL /* possible DLL fix needed */
+
+/* Using Localbus SDRAM to emulate flash before we can program the flash,
+ * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
+ * Not availabe for EVAL board
+ */
+#undef CONFIG_RAM_AS_FLASH
+
+/* sysclk for MPC8540EVAL */
+#if defined(CONFIG_SYSCLK_66M)
+ /*
+ * the oscillator on board is 66Mhz
+ * can also get 66M clock from external PCI
+ */
+ #define CONFIG_SYS_CLK_FREQ 66000000
+#else
+ #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
+#endif
+
+/* below can be toggled for performance analysis. otherwise use default */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#undef CONFIG_BTB /* toggle branch predition */
+#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00400000
+
+#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
+#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
+#endif
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+#define CFG_SDRAM_SIZE 256 /* DDR is now 256MB */
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
+#else
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#endif
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 0MB */
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
+#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */
+#else /* Boot from real Flash */
+#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
+#define CFG_BR0_PRELIM 0xff801001 /* port size 16bit */
+#endif
+
+#define CFG_OR0_PRELIM 0xff806f67 /* 8MB Flash */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/
+#define CFG_FLASH_CFI 1
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+/* Here some DDR setting should be added */
+
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM 0xf0001861 /* 64MB localbus SDRAM */
+#define CFG_OR2_PRELIM 0xfc006901
+#define CFG_LBC_LCRR 0x00030004 /* local bus freq divider*/
+#define CFG_LBC_LBCR 0x00000000
+#define CFG_LBC_LSRT 0x20000000
+#define CFG_LBC_MRTPR 0x20000000
+#define CFG_LBC_LSDMR_1 0x2861b723
+#define CFG_LBC_LSDMR_2 0x0861b723
+#define CFG_LBC_LSDMR_3 0x0861b723
+#define CFG_LBC_LSDMR_4 0x1861b723
+#define CFG_LBC_LSDMR_5 0x4061b723
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
+#else
+#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */
+#endif
+#define CFG_OR4_PRELIM 0xffffe1f1
+#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+
+/* General PCI */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS 0x80000000
+#define CFG_PCI_MEM_SIZE 0x20000000
+#define CFG_PCI_IO_BASE 0xe2000000
+
+#if defined(CONFIG_PCI)
+#define CONFIG_NET_MULTI
+#undef CONFIG_EEPRO100
+#define CONFIG_TULIP
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR 0xe0000000
+#define PCI_ENET0_MEMADDR 0xe0000000
+#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
+#endif
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0008
+#elif defined(CONFIG_TSEC_ENET)
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
+#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_MPC85XX_FEC 1
+#define CONFIG_MPC85XX_FEC_NAME "FEC"
+#define TSEC1_PHY_ADDR 7
+#define TSEC2_PHY_ADDR 4
+#define FEC_PHY_ADDR 2
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define FEC_PHYIDX 0
+/* Options are: TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME "TSEC0"
+
+#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */
+#define INTEL_LXT971_PHY 1
+#endif
+
+#undef DEBUG
+
+/* Environment */
+#ifndef CFG_RAMBOOT
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_ENV_IS_NOWHERE
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000)
+#define CFG_ENV_SIZE 0x2000
+#else
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#endif
+#define CFG_ENV_SIZE 0x2000
+#else
+/* #define CFG_NO_FLASH 1 */ /* Flash is not usable now */
+#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"
+#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
+#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \
+ | CFG_CMD_PCI | CFG_CMD_I2C ) & \
+ ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \
+ | CFG_CMD_I2C ) & \
+ ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \
+ | CFG_CMD_PING | CFG_CMD_I2C )
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*****************************/
+/* Environment Configuration */
+/*****************************/
+/* The mac addresses for all ethernet interface */
+/* NOTE: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 00:01:af:07:9b:8a
+#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
+#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+#endif
+
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE your.uImage
+
+#define CONFIG_SERVERIP 192.168.101.1
+#define CONFIG_IPADDR 192.168.101.11
+#define CONFIG_GATEWAYIP 192.168.101.0
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_HOSTNAME MPC8540EVAL
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 3dd4957..c96b98b 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -33,6 +33,7 @@
#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_MPC8541 1 /* MPC8541 specific */
#define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */
@@ -40,9 +41,12 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -94,18 +98,50 @@ extern unsigned long get_clock_freq(void);
#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
#endif
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
/*
- * SDRAM on the Local Bus
+ * Local Bus Definitions
*/
-#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ * Port Size = 16 bits = BRx[19:20] = 10
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
+ *
+ * OR0, OR1:
+ * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ * Reserved ORx[17:18] = 11, confusion here?
+ * CSNT = ORx[20] = 1
+ * ACS = half cycle delay = ORx[21:22] = 11
+ * SCY = 6 = ORx[24:27] = 0110
+ * TRLX = use relaxed timing = ORx[29] = 1
+ * EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
+ */
+
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */
-#define CFG_BR0_PRELIM 0xff801001 /* port size 16bit */
-#define CFG_BR1_PRELIM 0xff001001 /* port size 16bit */
+#define CFG_BR0_PRELIM 0xff801001
+#define CFG_BR1_PRELIM 0xff001001
-#define CFG_OR0_PRELIM 0xff806e61 /* 8MB Flash */
-#define CFG_OR1_PRELIM 0xff806e61 /* 8MB Flash */
+#define CFG_OR0_PRELIM 0xff806e65
+#define CFG_OR1_PRELIM 0xff806e65
#define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE}
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
@@ -120,11 +156,12 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
-#undef CONFIG_CLOCKS_IN_MHZ
/*
- * Local Bus Definitions
+ * SDRAM on the Local Bus
*/
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
/*
* Base Register 2 and Option Register 2 configure SDRAM.
@@ -326,7 +363,9 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
@@ -334,7 +373,9 @@ extern unsigned long get_clock_freq(void);
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define FEC_PHYIDX 0
-#define CONFIG_ETHPRIME "MOTO ENET0"
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
#endif /* CONFIG_TSEC_ENET */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
new file mode 100644
index 0000000..4ca8bc3
--- /dev/null
+++ b/include/configs/MPC8548CDS.h
@@ -0,0 +1,521 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8548cds board configuration file
+ *
+ * Please refer to doc/README.mpc85xxcds for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548 1 /* MPC8548 specific */
+#define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */
+
+#undef CONFIG_PCI
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the CDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_clock_freq(void);
+#endif
+#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+#error ("CONFIG_SPD_EEPROM is required")
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ * Port Size = 16 bits = BRx[19:20] = 10
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
+ *
+ * OR0, OR1:
+ * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ * Reserved ORx[17:18] = 11, confusion here?
+ * CSNT = ORx[20] = 1
+ * ACS = half cycle delay = ORx[21:22] = 11
+ * SCY = 6 = ORx[24:27] = 0110
+ * TRLX = use relaxed timing = ORx[29] = 1
+ * EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
+ */
+
+#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */
+
+#define CFG_BR0_PRELIM 0xff801001
+#define CFG_BR1_PRELIM 0xff001001
+
+#define CFG_OR0_PRELIM 0xff806e65
+#define CFG_OR1_PRELIM 0xff806e65
+
+#define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port-size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
+#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ * or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
+ | CFG_LBC_LSDMR_PRETOACT7 \
+ | CFG_LBC_LSDMR_ACTTORW7 \
+ | CFG_LBC_LSDMR_BL8 \
+ | CFG_LBC_LSDMR_WRC4 \
+ | CFG_LBC_LSDMR_CL3 \
+ | CFG_LBC_LSDMR_RFEN \
+ )
+
+/*
+ * The CADMUS registers are connected to CS3 on CDS.
+ * The new memory map places CADMUS at 0xf8000000.
+ *
+ * For BR3, need:
+ * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
+ * port-size = 8-bits = BR[19:20] = 01
+ * no parity checking = BR[21:22] = 00
+ * GPMC for MSEL = BR[24:26] = 000
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
+ *
+ * For OR3, need:
+ * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
+ * disable buffer ctrl OR[19] = 0
+ * CSNT OR[20] = 1
+ * ACS OR[21:22] = 11
+ * XACS OR[23] = 1
+ * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
+ * SETA OR[28] = 0
+ * TRLX OR[29] = 1
+ * EHTR OR[30] = 1
+ * EAD extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
+ */
+
+#define CADMUS_BASE_ADDR 0xf8000000
+#define CFG_BR3_PRELIM 0xf8000801
+#define CFG_OR3_PRELIM 0xfff00ff7
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 2
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0xe2000000
+#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+
+#define CFG_PCI2_MEM_BASE 0xa0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0xe3000000
+#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
+#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_MEMADDR 0xe0000000
+ #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0"
+#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1"
+#define CONFIG_MPC85XX_TSEC3 1
+#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2"
+#define CONFIG_MPC85XX_TSEC4 1
+#define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
+#define TSEC3_PHY_ADDR 2
+#define TSEC4_PHY_ADDR 3
+#define FEC_PHY_ADDR 3
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+#define TSEC4_PHYIDX 0
+#define FEC_PHYIDX 0
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME "eTSEC0"
+
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#define CFG_ENV_SIZE 0x2000
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CONFIG_PCI)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PCI \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII)
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_PING \
+ | CFG_CMD_I2C \
+ | CFG_CMD_MII)
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#endif
+
+#define CONFIG_IPADDR 192.168.1.253
+
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE your.uImage
+
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS1\0" \
+ "ramdiskaddr=400000\0" \
+ "ramdiskfile=your.ramdisk.u-boot\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 379a12c..a44e3ec 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -33,6 +33,7 @@
#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_MPC8555 1 /* MPC8555 specific */
#define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */
@@ -40,9 +41,12 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -94,18 +98,50 @@ extern unsigned long get_clock_freq(void);
#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
#endif
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
/*
- * SDRAM on the Local Bus
+ * Local Bus Definitions
*/
-#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ * Port Size = 16 bits = BRx[19:20] = 10
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
+ *
+ * OR0, OR1:
+ * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ * Reserved ORx[17:18] = 11, confusion here?
+ * CSNT = ORx[20] = 1
+ * ACS = half cycle delay = ORx[21:22] = 11
+ * SCY = 6 = ORx[24:27] = 0110
+ * TRLX = use relaxed timing = ORx[29] = 1
+ * EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
+ */
+
#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */
-#define CFG_BR0_PRELIM 0xff801001 /* port size 16bit */
-#define CFG_BR1_PRELIM 0xff001001 /* port size 16bit */
+#define CFG_BR0_PRELIM 0xff801001
+#define CFG_BR1_PRELIM 0xff001001
-#define CFG_OR0_PRELIM 0xff806e61 /* 8MB Flash */
-#define CFG_OR1_PRELIM 0xff806e61 /* 8MB Flash */
+#define CFG_OR0_PRELIM 0xff806e65
+#define CFG_OR1_PRELIM 0xff806e65
#define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE}
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
@@ -120,11 +156,12 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
-#undef CONFIG_CLOCKS_IN_MHZ
/*
- * Local Bus Definitions
+ * SDRAM on the Local Bus
*/
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
/*
* Base Register 2 and Option Register 2 configure SDRAM.
@@ -326,7 +363,9 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
@@ -334,7 +373,9 @@ extern unsigned long get_clock_freq(void);
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define FEC_PHYIDX 0
-#define CONFIG_ETHPRIME "MOTO ENET0"
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
#endif /* CONFIG_TSEC_ENET */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 7271737..db878cb 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -38,7 +38,7 @@
#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
-#define CONFIG_MPC8560 1 /* MPC8560 specific */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
#define CONFIG_PCI
@@ -46,10 +46,12 @@
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
/*
* sysclk for MPC85xx
@@ -337,13 +339,17 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
-#define CONFIG_ETHPRIME "MOTO ENET0"
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index a4c4fc9..9ca1e52 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -37,6 +37,7 @@
#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
#define CONFIG_PM826 1 /* ...on a PM8260 module */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 5b71c96..7d98df5 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -37,6 +37,7 @@
#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
#define CONFIG_PM828 1 /* ...on a PM828 module */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index b3e1f5e..07e3f06 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -45,10 +45,12 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#undef CONFIG_SPD_EEPROM /* do not use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+
/*
* sysclk for MPC85xx
@@ -256,17 +258,21 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define CONFIG_MPC85XX_FEC 1
+#define CONFIG_MPC85XX_FEC_NAME "FEC"
#define FEC_PHY_ADDR 3
#define FEC_PHYIDX 0
-#define CONFIG_ETHPRIME "ENET0"
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_HAS_ETH1 1
#define CONFIG_HAS_ETH2 1
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index cdf716c..6ae9403 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -173,6 +173,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_RPXSUPER 1 /* on an Embedded Planet RPX Super Board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index f98a6c6..a552970 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -33,6 +33,8 @@
#define CPU_ID_STR "MPC8250"
#endif /* CONFIG_MPC8248 */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+
#define CONFIG_RATTLER /* Analogue&Micro Rattler board */
#undef DEBUG
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 60561eb..0451b20 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -46,7 +46,7 @@
#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
-#define CONFIG_MPC8560 1 /* MPC8560 (CPU) specific */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */
@@ -227,10 +227,14 @@
#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
- #define CONFIG_NET_MULTI 1
- #define CONFIG_PHY_BCM5421S /* GigaBit Ether PHY */
- #define CONFIG_MII 1 /* MII PHY management */
- #define CONFIG_PHY_ADDR 25 /* PHY address */
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MPC85xx_TSEC1
+# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
+# define CONFIG_MII 1 /* MII PHY management */
+# define TSEC1_PHY_ADDR 25
+# define TSEC1_PHYIDX 0
+/* Options are: TSEC0 */
+# define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index 6bd0abe..8b46a17 100644
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -46,7 +46,7 @@
#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
-#define CONFIG_MPC8560 1 /* MPC8560 (CPU) specific */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */
@@ -215,10 +215,14 @@
#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
- #define CONFIG_NET_MULTI 1
- #define CONFIG_PHY_BCM5421S /* GigaBit Ether PHY */
- #define CONFIG_MII 1 /* MII PHY management */
- #define CONFIG_PHY_ADDR 25 /* PHY address */
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1 /* MII PHY management */
+# define CONFIG_MPC85xx_TSEC1
+# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
+# define TSEC1_PHY_ADDR 25
+# define TSEC1_PHYIDX 0
+/* Options are: TSEC0 */
+# define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index e4533b4..91914e8 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -36,6 +36,7 @@
#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */
#define CONFIG_SCM 1 /* ...on a System Controller Module */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#if (CONFIG_TQM8260 <= 100)
# error "TQM8260 module revison not supported"
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index eaf138a..e6266b5 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -52,6 +52,8 @@
#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */
#endif
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+
#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
diff --git a/include/configs/TQM8540.h b/include/configs/TQM8540.h
index 9dc77c4..8438b93 100644
--- a/include/configs/TQM8540.h
+++ b/include/configs/TQM8540.h
@@ -280,20 +280,24 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define CONFIG_MPC85XX_FEC 1
+#define CONFIG_MPC85XX_FEC_NAME "FEC"
#define FEC_PHY_ADDR 2
#define FEC_PHYIDX 0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
-#define CONFIG_ETHPRIME "ENET1"
+/* Options are TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME "TSEC1"
#endif /* CONFIG_TSEC_ENET */
diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h
index f418e26..1466f31 100644
--- a/include/configs/TQM8560.h
+++ b/include/configs/TQM8560.h
@@ -276,6 +276,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#define TSEC2_PHY_ADDR 1
#define TSEC2_PHYIDX 0
@@ -288,7 +289,7 @@
#define CFG_CPMFCR_RAMTYPE 0
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-#define CONFIG_ETHPRIME "ENET1"
+#define CONFIG_ETHPRIME "TSEC1"
/*
* Environment
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 6857973..f71e691 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -30,6 +30,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */
#define CPU_ID_STR "MPC8265"
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#undef DEBUG
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 2751248..881a4ca 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_ATC 1 /* ...on a ATC board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/*
* select serial console configuration
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index b3ec89b..aea2e64 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_COGENT 1 /* using Cogent Modular Architecture */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index fb335db..98e1716 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -48,6 +48,8 @@
#define CFG_EP8260_H2 1
/* #undef CFG_EP8260_H2 */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+
/* What is the oscillator's (UX2) frequency in Hz? */
#define CONFIG_8260_CLKIN (66 * 1000 * 1000)
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 3666bdb..6c08043 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -330,6 +330,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_GW8260 1 /* on an GW8260 Board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 90d6b25..0d62b9e 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_HYMOD 1 /* ...on a Hymod board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 2ad2867..60b0b37 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -297,6 +297,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index b1f6cb2..6c9e392 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -37,6 +37,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_RSD_PROTO 1 /* on a R&S Protocol Board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index cc9774c..031eba5 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -544,6 +544,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */
#define CONFIG_SACSng 1 /* munged for the SACSng */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index dc9cec3..45e4494 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -481,6 +481,7 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */
+#define CONFIG_CPM2 1 /* Has a CPM2 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 8cf9eeb..5a434dc 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -40,7 +40,7 @@
#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
-#define CONFIG_MPC8560 1 /* MPC8560 specific */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */
/* XXX flagging this as something I might want to delete */
@@ -210,10 +210,14 @@
#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
- #define CONFIG_NET_MULTI 1
- #define CONFIG_PHY_BCM5421S 1 /* GigaBit Ether PHY */
- #define CONFIG_MII 1 /* MII PHY management */
- #define CONFIG_PHY_ADDR 25 /* PHY address */
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1 /* MII PHY management */
+# define CONFIG_MPC85xx_TSEC1
+# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
+# define TSEC1_PHY_ADDR 25
+# define TSEC1_PHYIDX 0
+/* Options are: TSEC0 */
+# define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index e9261db..e218597 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -39,7 +39,7 @@
#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
-#define CONFIG_MPC8560 1 /* MPC8560 specific */
+#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/
#undef CONFIG_PCI /* pci ethernet support */
@@ -227,14 +227,16 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
+#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
+#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#undef CONFIG_MPS85XX_FEC
#define TSEC1_PHY_ADDR 2
#define TSEC2_PHY_ADDR 4
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
-#define CONFIG_ETHPRIME "MOTO ENET0"
+#define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
diff --git a/include/ioports.h b/include/ioports.h
index eba9aee..d7e19e1 100644
--- a/include/ioports.h
+++ b/include/ioports.h
@@ -25,7 +25,7 @@ typedef struct {
* the internal memory map aligns the above structure on
* a 0x20 byte boundary
*/
-#ifdef CONFIG_MPC8560
+#ifdef CONFIG_MPC85xx
#define ioport_addr(im, idx) (ioport_t *)((uint)&((im)->im_cpm.im_cpm_iop) + ((idx)*0x20))
#else
#define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20))
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
new file mode 100644
index 0000000..38f7115
--- /dev/null
+++ b/include/mpc83xx.h
@@ -0,0 +1,288 @@
+/*
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc83xx.h
+ *
+ * MPC83xx specific definitions
+ */
+
+#ifndef __MPC83XX_H__
+#define __MPC83XX_H__
+
+#if defined(CONFIG_E300)
+#include <asm/e300.h>
+#endif
+
+/*
+ * MPC83xx cpu provide RCR register to do reset thing specially. easier
+ * to implement
+ */
+
+#define MPC83xx_RESET
+
+/*
+ * System reset offset (PowerPC standard)
+ */
+#define EXC_OFF_SYS_RESET 0x0100
+
+/*
+ * Default Internal Memory Register Space (Freescale recomandation)
+ */
+#define CONFIG_DEFAULT_IMMR 0xFF400000
+
+/*
+ * Watchdog
+ */
+#define SWCRR 0x0204
+#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
+#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */
+#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
+#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+
+#define SWCNR 0x0208
+#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
+#define SWCNR_RES ~(SWCNR_SWCN)
+
+#define SWSRR 0x020E
+
+/*
+ * Default Internal Memory Register Space (Freescale recomandation)
+ */
+#define IMMRBAR 0x0000
+#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Identifies the 12 most-significant address bits of the base of the 1 MByte internal memory window. */
+#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
+
+/*
+ * Default Internal Memory Register Space (Freescale recomandation)
+ */
+#define LBLAWBAR0 0x0020
+#define LBLAWAR0 0x0024
+#define LBLAWBAR1 0x0028
+#define LBLAWAR1 0x002C
+#define LBLAWBAR2 0x0030
+#define LBLAWAR2 0x0034
+#define LBLAWBAR3 0x0038
+#define LBLAWAR3 0x003C
+
+
+/*
+ * Base Registers & Option Registers
+ */
+#define BR0 0x5000
+#define BR1 0x5008
+#define BR2 0x5010
+#define BR3 0x5018
+#define BR4 0x5020
+#define BR5 0x5028
+#define BR6 0x5030
+#define BR7 0x5038
+
+#define BR_BA 0xFFFF8000
+#define BR_BA_SHIFT 15
+#define BR_PS 0x00001800
+#define BR_PS_SHIFT 11
+#define BR_DECC 0x00000600
+#define BR_DECC_SHIFT 9
+#define BR_WP 0x00000100
+#define BR_WP_SHIFT 8
+#define BR_MSEL 0x000000E0
+#define BR_MSEL_SHIFT 5
+#define BR_V 0x00000001
+#define BR_V_SHIFT 0
+#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_GPCM_AM 0xFFFF8000
+#define OR_GPCM_AM_SHIFT 15
+#define OR_GPCM_BCTLD 0x00001000
+#define OR_GPCM_BCTLD_SHIFT 12
+#define OR_GPCM_CSNT 0x00000800
+#define OR_GPCM_CSNT_SHIFT 11
+#define OR_GPCM_ACS 0x00000600
+#define OR_GPCM_ACS_SHIFT 9
+#define OR_GPCM_XACS 0x00000100
+#define OR_GPCM_XACS_SHIFT 8
+#define OR_GPCM_SCY 0x000000F0
+#define OR_GPCM_SCY_SHIFT 4
+#define OR_GPCM_SETA 0x00000008
+#define OR_GPCM_SETA_SHIFT 3
+#define OR_GPCM_TRLX 0x00000004
+#define OR_GPCM_TRLX_SHIFT 2
+#define OR_GPCM_EHTR 0x00000002
+#define OR_GPCM_EHTR_SHIFT 1
+#define OR_GPCM_EAD 0x00000001
+#define OR_GPCM_EAD_SHIFT 0
+
+#define OR_UPM_AM 0xFFFF8000
+#define OR_UPM_AM_SHIFT 15
+#define OR_UPM_XAM 0x00006000
+#define OR_UPM_XAM_SHIFT 13
+#define OR_UPM_BCTLD 0x00001000
+#define OR_UPM_BCTLD_SHIFT 12
+#define OR_UPM_BI 0x00000100
+#define OR_UPM_BI_SHIFT 8
+#define OR_UPM_TRLX 0x00000004
+#define OR_UPM_TRLX_SHIFT 2
+#define OR_UPM_EHTR 0x00000002
+#define OR_UPM_EHTR_SHIFT 1
+#define OR_UPM_EAD 0x00000001
+#define OR_UPM_EAD_SHIFT 0
+
+#define OR_SDRAM_AM 0xFFFF8000
+#define OR_SDRAM_AM_SHIFT 15
+#define OR_SDRAM_XAM 0x00006000
+#define OR_SDRAM_XAM_SHIFT 13
+#define OR_SDRAM_COLS 0x00001C00
+#define OR_SDRAM_COLS_SHIFT 10
+#define OR_SDRAM_ROWS 0x000001C0
+#define OR_SDRAM_ROWS_SHIFT 6
+#define OR_SDRAM_PMSEL 0x00000020
+#define OR_SDRAM_PMSEL_SHIFT 5
+#define OR_SDRAM_EAD 0x00000001
+#define OR_SDRAM_EAD_SHIFT 0
+
+/*
+ * Hard Reset Configration Word - High
+ */
+#define HRCWH_PCI_AGENT 0x00000000
+#define HRCWH_PCI_HOST 0x80000000
+
+#define HRCWH_32_BIT_PCI 0x00000000
+#define HRCWH_64_BIT_PCI 0x40000000
+
+#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000
+#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000
+
+#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000
+#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000
+
+#define HRCWH_CORE_DISABLE 0x08000000
+#define HRCWH_CORE_ENABLE 0x00000000
+
+#define HRCWH_FROM_0X00000100 0x00000000
+#define HRCWH_FROM_0XFFF00100 0x04000000
+
+#define HRCWH_BOOTSEQ_DISABLE 0x00000000
+#define HRCWH_BOOTSEQ_NORMAL 0x01000000
+#define HRCWH_BOOTSEQ_EXTENDED 0x02000000
+
+#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000
+#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000
+
+#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000
+#define HRCWH_ROM_LOC_PCI1 0x00100000
+#define HRCWH_ROM_LOC_PCI2 0x00200000
+#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
+#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
+#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
+
+#define HRCWH_TSEC1M_IN_RGMII 0x00000000
+#define HRCWH_TSEC1M_IN_RTBI 0x00004000
+#define HRCWH_TSEC1M_IN_GMII 0x00008000
+#define HRCWH_TSEC1M_IN_TBI 0x0000C000
+
+#define HRCWH_TSEC2M_IN_RGMII 0x00000000
+#define HRCWH_TSEC2M_IN_RTBI 0x00001000
+#define HRCWH_TSEC2M_IN_GMII 0x00002000
+#define HRCWH_TSEC2M_IN_TBI 0x00003000
+
+#define HRCWH_BIG_ENDIAN 0x00000000
+#define HRCWH_LITTLE_ENDIAN 0x00000008
+
+/*
+ * Hard Reset Configration Word - Low
+ */
+#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000
+#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000
+
+#define HRCWL_DDR_TO_SCB_CLK_1X1 0x00000000
+#define HRCWL_DDR_TO_SCB_CLK_2X1 0x40000000
+
+#define HRCWL_CSB_TO_CLKIN_16X1 0x00000000
+#define HRCWL_CSB_TO_CLKIN_1X1 0x01000000
+#define HRCWL_CSB_TO_CLKIN_2X1 0x02000000
+#define HRCWL_CSB_TO_CLKIN_3X1 0x03000000
+#define HRCWL_CSB_TO_CLKIN_4X1 0x04000000
+#define HRCWL_CSB_TO_CLKIN_5X1 0x05000000
+#define HRCWL_CSB_TO_CLKIN_6X1 0x06000000
+#define HRCWL_CSB_TO_CLKIN_7X1 0x07000000
+#define HRCWL_CSB_TO_CLKIN_8X1 0x08000000
+#define HRCWL_CSB_TO_CLKIN_9X1 0x09000000
+#define HRCWL_CSB_TO_CLKIN_10X1 0x0A000000
+#define HRCWL_CSB_TO_CLKIN_11X1 0x0B000000
+#define HRCWL_CSB_TO_CLKIN_12X1 0x0C000000
+#define HRCWL_CSB_TO_CLKIN_13X1 0x0D000000
+#define HRCWL_CSB_TO_CLKIN_14X1 0x0E000000
+#define HRCWL_CSB_TO_CLKIN_15X1 0x0F000000
+
+#define HRCWL_VCO_BYPASS 0x00000000
+#define HRCWL_VCO_1X2 0x00000000
+#define HRCWL_VCO_1X4 0x00200000
+#define HRCWL_VCO_1X8 0x00400000
+
+#define HRCWL_CORE_TO_CSB_BYPASS 0x00000000
+#define HRCWL_CORE_TO_CSB_1X1 0x00020000
+#define HRCWL_CORE_TO_CSB_1_5X1 0x00030000
+#define HRCWL_CORE_TO_CSB_2X1 0x00040000
+#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000
+#define HRCWL_CORE_TO_CSB_3X1 0x00060000
+
+/*
+ * LCRR - Clock Ratio Register (10.3.1.16)
+ */
+#define LCRR_DBYP 0x80000000
+#define LCRR_DBYP_SHIFT 31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_1 0x10000000
+#define LCRR_BUFCMDC_2 0x20000000
+#define LCRR_BUFCMDC_3 0x30000000
+#define LCRR_BUFCMDC_4 0x00000000
+#define LCRR_BUFCMDC_SHIFT 28
+#define LCRR_ECL 0x03000000
+#define LCRR_ECL_4 0x00000000
+#define LCRR_ECL_5 0x01000000
+#define LCRR_ECL_6 0x02000000
+#define LCRR_ECL_7 0x03000000
+#define LCRR_ECL_SHIFT 24
+#define LCRR_EADC 0x00030000
+#define LCRR_EADC_1 0x00010000
+#define LCRR_EADC_2 0x00020000
+#define LCRR_EADC_3 0x00030000
+#define LCRR_EADC_4 0x00000000
+#define LCRR_EADC_SHIFT 16
+#define LCRR_CLKDIV 0x0000000F
+#define LCRR_CLKDIV_2 0x00000002
+#define LCRR_CLKDIV_4 0x00000004
+#define LCRR_CLKDIV_8 0x00000008
+#define LCRR_CLKDIV_SHIFT 0
+
+#endif /* __MPC83XX_H__ */
diff --git a/include/net.h b/include/net.h
index e50c381..623d225 100644
--- a/include/net.h
+++ b/include/net.h
@@ -29,7 +29,7 @@
# endif
#endif /* CONFIG_MPC5xxx */
-#if !defined(CONFIG_NET_MULTI) && (defined(CONFIG_8260) || defined(CONFIG_MPC8560))
+#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_CPM2)
#include <config.h>
#if defined(CONFIG_ETHER_ON_FCC)
#if defined(CONFIG_ETHER_ON_SCC)
diff --git a/include/spd.h b/include/spd.h
index 1ad4d80..54b60d1 100644
--- a/include/spd.h
+++ b/include/spd.h
@@ -25,54 +25,82 @@
#define _SPD_H_
typedef struct spd_eeprom_s {
- unsigned char info_size; /* # of bytes written into serial memory */
- unsigned char chip_size; /* Total # of bytes of SPD memory device */
- unsigned char mem_type; /* Fundamental memory type (FPM, EDO, SDRAM...) */
- unsigned char nrow_addr; /* # of Row Addresses on this assembly */
- unsigned char ncol_addr; /* # of Column Addresses on this assembly */
- unsigned char nrows; /* # of Module Rows on this assembly */
- unsigned char dataw_lsb; /* Data Width of this assembly */
- unsigned char dataw_msb; /* ... Data Width continuation */
- unsigned char voltage; /* Voltage interface standard of this assembly */
- unsigned char clk_cycle; /* SDRAM Cycle time at CL=X */
- unsigned char clk_access; /* SDRAM Access from Clock at CL=X */
- unsigned char config; /* DIMM Configuration type (non-parity, ECC) */
- unsigned char refresh; /* Refresh Rate/Type */
- unsigned char primw; /* Primary SDRAM Width */
- unsigned char ecw; /* Error Checking SDRAM width */
- unsigned char min_delay; /* Min Clock Delay for Back to Back Random Address */
- unsigned char burstl; /* Burst Lengths Supported */
- unsigned char nbanks; /* # of Banks on Each SDRAM Device */
- unsigned char cas_lat; /* CAS# Latencies Supported */
- unsigned char cs_lat; /* CS# Latency */
- unsigned char write_lat; /* Write Latency (also called Write Recovery time) */
- unsigned char mod_attr; /* SDRAM Module Attributes */
- unsigned char dev_attr; /* SDRAM Device Attributes */
- unsigned char clk_cycle2; /* Min SDRAM Cycle time at CL=X-1 */
- unsigned char clk_access2; /* SDRAM Access from Clock at CL=X-1 */
- unsigned char clk_cycle3; /* Min SDRAM Cycle time at CL=X-2 */
- unsigned char clk_access3; /* Max SDRAM Access from Clock at CL=X-2 */
- unsigned char trp; /* Min Row Precharge Time (tRP) */
- unsigned char trrd; /* Min Row Active to Row Active (tRRD) */
- unsigned char trcd; /* Min RAS to CAS Delay (tRCD) */
- unsigned char tras; /* Minimum RAS Pulse Width (tRAS) */
- unsigned char row_dens; /* Density of each row on module */
- unsigned char ca_setup; /* Command and Address signal input setup time */
- unsigned char ca_hold; /* Command and Address signal input hold time */
- unsigned char data_setup; /* Data signal input setup time */
- unsigned char data_hold; /* Data signal input hold time */
- unsigned char sset[26]; /* Superset Information (may be used in future) */
- unsigned char spd_rev; /* SPD Data Revision Code */
- unsigned char cksum; /* Checksum for bytes 0-62 */
- unsigned char mid[8]; /* Manufacturer's JEDEC ID code per JEP-108E */
- unsigned char mloc; /* Manufacturing Location */
- unsigned char mpart[18]; /* Manufacturer's Part Number */
- unsigned char rev[2]; /* Revision Code */
- unsigned char mdate[2]; /* Manufacturing Date */
- unsigned char sernum[4]; /* Assembly Serial Number */
- unsigned char mspec[27]; /* Manufacturer Specific Data */
- unsigned char freq; /* Intel specification frequency */
- unsigned char intel_cas; /* Intel Specification CAS# Latency support */
+ unsigned char info_size; /* 0 # bytes written into serial memory */
+ unsigned char chip_size; /* 1 Total # bytes of SPD memory device */
+ unsigned char mem_type; /* 2 Fundamental memory type */
+ unsigned char nrow_addr; /* 3 # of Row Addresses on this assembly */
+ unsigned char ncol_addr; /* 4 # of Column Addrs on this assembly */
+ unsigned char nrows; /* 5 # of Module Rows on this assembly */
+ unsigned char dataw_lsb; /* 6 Data Width of this assembly */
+ unsigned char dataw_msb; /* 7 ... Data Width continuation */
+ unsigned char voltage; /* 8 Voltage intf std of this assembly */
+ unsigned char clk_cycle; /* 9 SDRAM Cycle time at CL=X */
+ unsigned char clk_access; /* 10 SDRAM Access from Clock at CL=X */
+ unsigned char config; /* 11 DIMM Configuration type */
+ unsigned char refresh; /* 12 Refresh Rate/Type */
+ unsigned char primw; /* 13 Primary SDRAM Width */
+ unsigned char ecw; /* 14 Error Checking SDRAM width */
+ unsigned char min_delay; /* 15 for Back to Back Random Address */
+ unsigned char burstl; /* 16 Burst Lengths Supported */
+ unsigned char nbanks; /* 17 # of Banks on Each SDRAM Device */
+ unsigned char cas_lat; /* 18 CAS# Latencies Supported */
+ unsigned char cs_lat; /* 19 CS# Latency */
+ unsigned char write_lat; /* 20 Write Latency (aka Write Recovery) */
+ unsigned char mod_attr; /* 21 SDRAM Module Attributes */
+ unsigned char dev_attr; /* 22 SDRAM Device Attributes */
+ unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time at CL=X-1 */
+ unsigned char clk_access2; /* 24 SDRAM Access from Clock at CL=X-1 */
+ unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time at CL=X-2 */
+ unsigned char clk_access3; /* 26 Max Access from Clock at CL=X-2 */
+ unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/
+ unsigned char trrd; /* 28 Min Row Active to Row Active (tRRD) */
+ unsigned char trcd; /* 29 Min RAS to CAS Delay (tRCD) */
+ unsigned char tras; /* 30 Minimum RAS Pulse Width (tRAS) */
+ unsigned char row_dens; /* 31 Density of each row on module */
+ unsigned char ca_setup; /* 32 Cmd + Addr signal input setup time */
+ unsigned char ca_hold; /* 33 Cmd and Addr signal input hold time */
+ unsigned char data_setup; /* 34 Data signal input setup time */
+ unsigned char data_hold; /* 35 Data signal input hold time */
+ unsigned char twr; /* 36 Write Recovery time tWR */
+ unsigned char twtr; /* 37 Int write to read delay tWTR */
+ unsigned char trtp; /* 38 Int read to precharge delay tRTP */
+ unsigned char mem_probe; /* 39 Mem analysis probe characteristics */
+ unsigned char trctrfc_ext; /* 40 Extensions to trc and trfc */
+ unsigned char trc; /* 41 Min Active to Auto refresh time tRC */
+ unsigned char trfc; /* 42 Min Auto to Active period tRFC */
+ unsigned char tckmax; /* 43 Max device cycle time tCKmax */
+ unsigned char tdqsq; /* 44 Max DQS to DQ skew */
+ unsigned char tqhs; /* 45 Max Read DataHold skew tQHS */
+ unsigned char pll_relock; /* 46 PLL Relock time */
+ unsigned char res[15]; /* 47-xx IDD in SPD and Reserved space */
+ unsigned char spd_rev; /* 62 SPD Data Revision Code */
+ unsigned char cksum; /* 63 Checksum for bytes 0-62 */
+ unsigned char mid[8]; /* 64 Mfr's JEDEC ID code per JEP-108E */
+ unsigned char mloc; /* 72 Manufacturing Location */
+ unsigned char mpart[18]; /* 73 Manufacturer's Part Number */
+ unsigned char rev[2]; /* 91 Revision Code */
+ unsigned char mdate[2]; /* 93 Manufacturing Date */
+ unsigned char sernum[4]; /* 95 Assembly Serial Number */
+ unsigned char mspec[27]; /* 99 Manufacturer Specific Data */
+
+ /*
+ * Open for Customer Use starting with byte 128.
+ */
+ unsigned char freq; /* 128 Intel spec: frequency */
+ unsigned char intel_cas; /* 129 Intel spec: CAS# Latency support */
} spd_eeprom_t;
+
+/*
+ * Byte 2 Fundamental Memory Types.
+ */
+#define SPD_MEMTYPE_FPM (0x01)
+#define SPD_MEMTYPE_EDO (0x02)
+#define SPD_MEMTYPE_PIPE_NIBBLE (0x03)
+#define SPD_MEMTYPE_SDRAM (0x04)
+#define SPD_MEMTYPE_ROM (0x05)
+#define SPD_MEMTYPE_SGRAM (0x06)
+#define SPD_MEMTYPE_DDR (0x07)
+#define SPD_MEMTYPE_DDR2 (0x08)
+
#endif /* _SPD_H_ */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 5951d56..c4b16e8 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -50,7 +50,7 @@
#include <net.h>
#include <serial.h>
#ifdef CFG_ALLOC_DPRAM
-#if !(defined(CONFIG_8260)||defined(CONFIG_MPC8560))
+#if !defined(CONFIG_CPM2)
#include <commproc.h>
#endif
#endif
@@ -272,7 +272,7 @@ init_fnc_t *init_sequence[] = {
init_timebase,
#endif
#ifdef CFG_ALLOC_DPRAM
-#if !(defined(CONFIG_8260) || defined(CONFIG_MPC8560))
+#if !defined(CONFIG_CPM2)
dpram_init,
#endif
#endif
@@ -293,6 +293,11 @@ init_fnc_t *init_sequence[] = {
prt_8260_rsr,
prt_8260_clks,
#endif /* CONFIG_8260 */
+
+#if defined(CONFIG_MPC83XX)
+ print_clock_conf,
+#endif
+
checkcpu,
#if defined(CONFIG_MPC5xxx)
prt_mpc5xxx_clks,
@@ -360,7 +365,7 @@ void board_init_f (ulong bootflag)
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
-#if !(defined(CONFIG_8260) || defined(CONFIG_MPC8560))
+#if !defined(CONFIG_CPM2)
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
#endif
@@ -495,6 +500,9 @@ void board_init_f (ulong bootflag)
#if defined(CONFIG_MPC5xxx)
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
#endif
+#if defined(CONFIG_MPC83XX)
+ bd->bi_immrbar = CFG_IMMRBAR;
+#endif
#if defined(CONFIG_MPC8220)
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
bd->bi_inpfreq = gd->inp_clk;
@@ -521,12 +529,12 @@ void board_init_f (ulong bootflag)
WATCHDOG_RESET ();
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
-#if defined(CONFIG_8260) || defined(CONFIG_MPC8560)
+#if defined(CONFIG_CPM2)
bd->bi_cpmfreq = gd->cpm_clk;
bd->bi_brgfreq = gd->brg_clk;
bd->bi_sccfreq = gd->scc_clk;
bd->bi_vco = gd->vco_out;
-#endif /* CONFIG_8260 */
+#endif /* CONFIG_CPM2 */
#if defined(CONFIG_MPC5xxx)
bd->bi_ipbfreq = gd->ipb_clk;
bd->bi_pcifreq = gd->pci_clk;
diff --git a/net/eth.c b/net/eth.c
index 29c24c8..61862aa 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -52,7 +52,7 @@ extern int rtl8139_initialize(bd_t*);
extern int rtl8169_initialize(bd_t*);
extern int scc_initialize(bd_t*);
extern int skge_initialize(bd_t*);
-extern int tsec_initialize(bd_t*, int);
+extern int tsec_initialize(bd_t*, int, char *);
static struct eth_device *eth_devices, *eth_current;
@@ -155,13 +155,28 @@ int eth_initialize(bd_t *bis)
skge_initialize(bis);
#endif
#if defined(CONFIG_MPC85XX_TSEC1)
- tsec_initialize(bis, 0);
+ tsec_initialize(bis, 0, CONFIG_MPC85XX_TSEC1_NAME);
+#elif defined(CONFIG_MPC83XX_TSEC1)
+ tsec_initialize(bis, 0, CONFIG_MPC83XX_TSEC1_NAME);
#endif
#if defined(CONFIG_MPC85XX_TSEC2)
- tsec_initialize(bis, 1);
+ tsec_initialize(bis, 1, CONFIG_MPC85XX_TSEC2_NAME);
+#elif defined(CONFIG_MPC83XX_TSEC2)
+ tsec_initialize(bis, 1, CONFIG_MPC83XX_TSEC2_NAME);
#endif
#if defined(CONFIG_MPC85XX_FEC)
- tsec_initialize(bis, 2);
+ tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME);
+#else
+# if defined(CONFIG_MPC85XX_TSEC3)
+ tsec_initialize(bis, 2, CONFIG_MPC85XX_TSEC3_NAME);
+# elif defined(CONFIG_MPC83XX_TSEC3)
+ tsec_initialize(bis, 2, CONFIG_MPC83XX_TSEC3_NAME);
+# endif
+# if defined(CONFIG_MPC85XX_TSEC4)
+ tsec_initialize(bis, 3, CONFIG_MPC85XX_TSEC4_NAME);
+# elif defined(CONFIG_MPC83XX_TSEC4)
+ tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME);
+# endif
#endif
#if defined(CONFIG_AU1X00)
au1x00_enet_initialize(bis);