summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.travis.yml3
-rw-r--r--Kconfig55
-rw-r--r--MAINTAINERS11
-rw-r--r--Makefile7
-rw-r--r--README23
-rw-r--r--arch/Kconfig1
-rw-r--r--arch/arc/Kconfig59
-rw-r--r--arch/arc/config.mk12
-rw-r--r--arch/arc/cpu/arcv2/Makefile7
-rw-r--r--arch/arc/cpu/arcv2/start.S254
-rw-r--r--arch/arc/include/asm/cache.h6
-rw-r--r--arch/arm/Kconfig217
-rw-r--r--arch/arm/Makefile24
-rw-r--r--arch/arm/cpu/Makefile7
-rw-r--r--arch/arm/cpu/arm1176/Makefile1
-rw-r--r--arch/arm/cpu/arm1176/bcm2835/Kconfig12
-rw-r--r--arch/arm/cpu/arm1176/bcm2835/Makefile12
-rw-r--r--arch/arm/cpu/arm1176/start.S22
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/Makefile6
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/aemif.c78
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/clock.c432
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/init.c22
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S10
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/mux.c319
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/timer.c93
-rw-r--r--arch/arm/cpu/arm720t/Makefile6
-rw-r--r--arch/arm/cpu/arm720t/tegra-common/Makefile11
-rw-r--r--arch/arm/cpu/arm720t/tegra114/Makefile21
-rw-r--r--arch/arm/cpu/arm720t/tegra124/Makefile8
-rw-r--r--arch/arm/cpu/arm720t/tegra20/Makefile10
-rw-r--r--arch/arm/cpu/arm720t/tegra30/Makefile20
-rw-r--r--arch/arm/cpu/arm920t/Makefile3
-rw-r--r--arch/arm/cpu/arm920t/a320/Makefile9
-rw-r--r--arch/arm/cpu/arm920t/a320/reset.S10
-rw-r--r--arch/arm/cpu/arm920t/a320/timer.c118
-rw-r--r--arch/arm/cpu/arm920t/ks8695/Makefile9
-rw-r--r--arch/arm/cpu/arm920t/ks8695/lowlevel_init.S189
-rw-r--r--arch/arm/cpu/arm920t/ks8695/timer.c77
-rw-r--r--arch/arm/cpu/arm926ejs/Makefile8
-rw-r--r--arch/arm/cpu/arm926ejs/at91/config.mk2
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/Makefile8
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/clock.c27
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/reset.c24
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/timer.c115
-rw-r--r--arch/arm/cpu/arm926ejs/pantheon/Makefile9
-rw-r--r--arch/arm/cpu/arm926ejs/pantheon/cpu.c85
-rw-r--r--arch/arm/cpu/arm926ejs/pantheon/dram.c117
-rw-r--r--arch/arm/cpu/arm926ejs/pantheon/timer.c201
-rw-r--r--arch/arm/cpu/armv7/Makefile6
-rw-r--r--arch/arm/cpu/armv7/am33xx/clock_am43xx.c3
-rw-r--r--arch/arm/cpu/armv7/at91/config.mk8
-rw-r--r--arch/arm/cpu/armv7/bcm2835/Makefile13
-rw-r--r--arch/arm/cpu/armv7/exynos/Kconfig35
-rw-r--r--arch/arm/cpu/armv7/exynos/clock.c621
-rw-r--r--arch/arm/cpu/armv7/exynos/power.c28
-rw-r--r--arch/arm/cpu/armv7/exynos/spl_boot.c1
-rw-r--r--arch/arm/cpu/armv7/ls102xa/cpu.c231
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c4
-rw-r--r--arch/arm/cpu/armv7/omap-common/lowlevel_init.S2
-rw-r--r--arch/arm/cpu/armv7/omap3/Kconfig15
-rw-r--r--arch/arm/cpu/armv7/omap3/lowlevel_init.S2
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram.c83
-rw-r--r--arch/arm/cpu/armv7/rmobile/Kconfig6
-rw-r--r--arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S12
-rw-r--r--arch/arm/cpu/armv7/s5pc1xx/Kconfig4
-rw-r--r--arch/arm/cpu/armv7/start.S7
-rw-r--r--arch/arm/cpu/armv7/sunxi/Makefile5
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c46
-rw-r--r--arch/arm/cpu/armv7/sunxi/config.mk2
-rw-r--r--arch/arm/cpu/armv7/sunxi/dram_helpers.c37
-rw-r--r--arch/arm/cpu/armv7/sunxi/fel_utils.S42
-rw-r--r--arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds82
-rw-r--r--arch/arm/cpu/armv7/tegra-common/Kconfig28
-rw-r--r--arch/arm/cpu/armv7/tegra-common/Makefile10
-rw-r--r--arch/arm/cpu/armv7/tegra20/Makefile11
-rw-r--r--arch/arm/cpu/armv7/uniphier/Kconfig8
-rw-r--r--arch/arm/cpu/armv8/cache.S6
-rw-r--r--arch/arm/cpu/armv8/cache_v8.c18
-rw-r--r--arch/arm/cpu/armv8/fsl-lsch3/cpu.c62
-rw-r--r--arch/arm/cpu/armv8/fsl-lsch3/fdt.c28
-rw-r--r--arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S132
-rw-r--r--arch/arm/cpu/armv8/fsl-lsch3/mp.c8
-rw-r--r--arch/arm/cpu/armv8/fsl-lsch3/mp.h1
-rw-r--r--arch/arm/cpu/armv8/fsl-lsch3/speed.c16
-rw-r--r--arch/arm/dts/exynos4412-odroid.dts5
-rw-r--r--arch/arm/dts/exynos5422-odroidxu3.dts5
-rw-r--r--arch/arm/include/asm/arch-a320/a320.h22
-rw-r--r--arch/arm/include/asm/arch-am33xx/cpu.h2
-rw-r--r--arch/arm/include/asm/arch-bcm2835/gpio.h5
-rw-r--r--arch/arm/include/asm/arch-bcm2835/mbox.h10
-rw-r--r--arch/arm/include/asm/arch-bcm2835/sdhci.h18
-rw-r--r--arch/arm/include/asm/arch-bcm2835/timer.h18
-rw-r--r--arch/arm/include/asm/arch-bcm2835/wdog.h18
-rw-r--r--arch/arm/include/asm/arch-exynos/clk.h4
-rw-r--r--arch/arm/include/asm/arch-fsl-lsch3/config.h38
-rw-r--r--arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h3
-rw-r--r--arch/arm/include/asm/arch-ks8695/platform.h294
-rw-r--r--arch/arm/include/asm/arch-lpc32xx/config.h4
-rw-r--r--arch/arm/include/asm/arch-ls102xa/config.h15
-rw-r--r--arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h40
-rw-r--r--arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h57
-rw-r--r--arch/arm/include/asm/arch-mb86r0x/hardware.h15
-rw-r--r--arch/arm/include/asm/arch-mb86r0x/mb86r0x.h599
-rw-r--r--arch/arm/include/asm/arch-pantheon/config.h53
-rw-r--r--arch/arm/include/asm/arch-pantheon/cpu.h77
-rw-r--r--arch/arm/include/asm/arch-pantheon/gpio.h0
-rw-r--r--arch/arm/include/asm/arch-pantheon/mfp.h39
-rw-r--r--arch/arm/include/asm/arch-pantheon/pantheon.h38
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun4i.h9
-rw-r--r--arch/arm/include/asm/arch-sunxi/dram.h28
-rw-r--r--arch/arm/include/asm/arch-sunxi/sys_proto.h10
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/clock.h53
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/hardware.h160
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/mux.h291
-rw-r--r--arch/arm/include/asm/armv8/mmu.h3
-rw-r--r--arch/arm/include/asm/emif.h1
-rw-r--r--arch/arm/include/asm/global_data.h3
-rw-r--r--arch/arm/include/asm/spl.h4
-rw-r--r--arch/arm/include/asm/system.h16
-rw-r--r--arch/arm/lib/Makefile1
-rw-r--r--arch/arm/lib/asm-offsets.c46
-rw-r--r--arch/arm/lib/bootm.c2
-rw-r--r--arch/arm/lib/stack.c42
-rw-r--r--arch/arm/mach-at91/Kconfig168
-rw-r--r--arch/arm/mach-at91/Makefile (renamed from arch/arm/cpu/at91-common/Makefile)14
-rw-r--r--arch/arm/mach-at91/arm920t/Makefile (renamed from arch/arm/cpu/arm920t/at91/Makefile)0
-rw-r--r--arch/arm/mach-at91/arm920t/at91rm9200_devices.c (renamed from arch/arm/cpu/arm920t/at91/at91rm9200_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm920t/clock.c (renamed from arch/arm/cpu/arm920t/at91/clock.c)0
-rw-r--r--arch/arm/mach-at91/arm920t/cpu.c (renamed from arch/arm/cpu/arm920t/at91/cpu.c)0
-rw-r--r--arch/arm/mach-at91/arm920t/lowlevel_init.S (renamed from arch/arm/cpu/arm920t/at91/lowlevel_init.S)0
-rw-r--r--arch/arm/mach-at91/arm920t/reset.c (renamed from arch/arm/cpu/arm920t/at91/reset.c)0
-rw-r--r--arch/arm/mach-at91/arm920t/timer.c (renamed from arch/arm/cpu/arm920t/at91/timer.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/Makefile (renamed from arch/arm/cpu/arm926ejs/at91/Makefile)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c (renamed from arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/clock.c (renamed from arch/arm/cpu/arm926ejs/at91/clock.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/cpu.c (renamed from arch/arm/cpu/arm926ejs/at91/cpu.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/eflash.c (renamed from arch/arm/cpu/arm926ejs/at91/eflash.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/led.c (renamed from arch/arm/cpu/arm926ejs/at91/led.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/lowlevel_init.S (renamed from arch/arm/cpu/arm926ejs/at91/lowlevel_init.S)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/reset.c (renamed from arch/arm/cpu/arm926ejs/at91/reset.c)0
-rw-r--r--arch/arm/mach-at91/arm926ejs/timer.c (renamed from arch/arm/cpu/arm926ejs/at91/timer.c)0
-rw-r--r--arch/arm/mach-at91/armv7/Makefile (renamed from arch/arm/cpu/armv7/at91/Makefile)0
-rw-r--r--arch/arm/mach-at91/armv7/clock.c (renamed from arch/arm/cpu/armv7/at91/clock.c)0
-rw-r--r--arch/arm/mach-at91/armv7/cpu.c (renamed from arch/arm/cpu/armv7/at91/cpu.c)0
-rw-r--r--arch/arm/mach-at91/armv7/reset.c (renamed from arch/arm/cpu/armv7/at91/reset.c)0
-rw-r--r--arch/arm/mach-at91/armv7/sama5d3_devices.c (renamed from arch/arm/cpu/armv7/at91/sama5d3_devices.c)0
-rw-r--r--arch/arm/mach-at91/armv7/sama5d4_devices.c (renamed from arch/arm/cpu/armv7/at91/sama5d4_devices.c)0
-rw-r--r--arch/arm/mach-at91/armv7/timer.c (renamed from arch/arm/cpu/armv7/at91/timer.c)0
-rw-r--r--arch/arm/mach-at91/config.mk9
-rw-r--r--arch/arm/mach-at91/include/mach/at91_common.h (renamed from arch/arm/include/asm/arch-at91/at91_common.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_dbu.h (renamed from arch/arm/include/asm/arch-at91/at91_dbu.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_eefc.h (renamed from arch/arm/include/asm/arch-at91/at91_eefc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_emac.h (renamed from arch/arm/include/asm/arch-at91/at91_emac.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_gpbr.h (renamed from arch/arm/include/asm/arch-at91/at91_gpbr.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_mc.h (renamed from arch/arm/include/asm/arch-at91/at91_mc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pdc.h (renamed from arch/arm/include/asm/arch-at91/at91_pdc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pio.h (renamed from arch/arm/include/asm/arch-at91/at91_pio.h)12
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pit.h (renamed from arch/arm/include/asm/arch-at91/at91_pit.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pmc.h (renamed from arch/arm/include/asm/arch-at91/at91_pmc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_rstc.h (renamed from arch/arm/include/asm/arch-at91/at91_rstc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_rtt.h (renamed from arch/arm/include/asm/arch-at91/at91_rtt.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_spi.h (renamed from arch/arm/include/asm/arch-at91/at91_spi.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_st.h (renamed from arch/arm/include/asm/arch-at91/at91_st.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_tc.h (renamed from arch/arm/include/asm/arch-at91/at91_tc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91_wdt.h (renamed from arch/arm/include/asm/arch-at91/at91_wdt.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91rm9200.h (renamed from arch/arm/include/asm/arch-at91/at91rm9200.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260.h (renamed from arch/arm/include/asm/arch-at91/at91sam9260.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9260_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h (renamed from arch/arm/include/asm/arch-at91/at91sam9261.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9261_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9263.h (renamed from arch/arm/include/asm/arch-at91/at91sam9263.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9263_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9263_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_sdramc.h (renamed from arch/arm/include/asm/arch-at91/at91sam9_sdramc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_smc.h (renamed from arch/arm/include/asm/arch-at91/at91sam9_smc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45.h (renamed from arch/arm/include/asm/arch-at91/at91sam9g45.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9rl.h (renamed from arch/arm/include/asm/arch-at91/at91sam9rl.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9x5.h (renamed from arch/arm/include/asm/arch-at91/at91sam9x5.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h (renamed from arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/atmel_mpddrc.h (renamed from arch/arm/include/asm/arch-at91/atmel_mpddrc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/atmel_serial.h (renamed from arch/arm/include/asm/arch-at91/atmel_serial.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/atmel_usba_udc.h (renamed from arch/arm/include/asm/arch-at91/atmel_usba_udc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/clk.h (renamed from arch/arm/include/asm/arch-at91/clk.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h (renamed from arch/arm/include/asm/arch-at91/gpio.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h (renamed from arch/arm/include/asm/arch-at91/hardware.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/sama5_matrix.h (renamed from arch/arm/include/asm/arch-at91/sama5_matrix.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/sama5_sfr.h (renamed from arch/arm/include/asm/arch-at91/sama5_sfr.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/sama5d3.h (renamed from arch/arm/include/asm/arch-at91/sama5d3.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/sama5d3_smc.h (renamed from arch/arm/include/asm/arch-at91/sama5d3_smc.h)0
-rw-r--r--arch/arm/mach-at91/include/mach/sama5d4.h (renamed from arch/arm/include/asm/arch-at91/sama5d4.h)0
-rw-r--r--arch/arm/mach-at91/mpddrc.c (renamed from arch/arm/cpu/at91-common/mpddrc.c)0
-rw-r--r--arch/arm/mach-at91/phy.c (renamed from arch/arm/cpu/at91-common/phy.c)0
-rw-r--r--arch/arm/mach-at91/sdram.c (renamed from arch/arm/cpu/at91-common/sdram.c)0
-rw-r--r--arch/arm/mach-at91/spl.c (renamed from arch/arm/cpu/at91-common/spl.c)0
-rw-r--r--arch/arm/mach-at91/spl_at91.c (renamed from arch/arm/cpu/at91-common/spl_at91.c)0
-rw-r--r--arch/arm/mach-at91/spl_atmel.c (renamed from arch/arm/cpu/at91-common/spl_atmel.c)0
-rw-r--r--arch/arm/mach-at91/u-boot-spl.lds (renamed from arch/arm/cpu/at91-common/u-boot-spl.lds)0
-rw-r--r--arch/arm/mach-davinci/Kconfig (renamed from arch/arm/cpu/arm926ejs/davinci/Kconfig)4
-rw-r--r--arch/arm/mach-davinci/Makefile (renamed from arch/arm/cpu/arm926ejs/davinci/Makefile)0
-rw-r--r--arch/arm/mach-davinci/config.mk (renamed from arch/arm/cpu/arm926ejs/davinci/config.mk)0
-rw-r--r--arch/arm/mach-davinci/cpu.c (renamed from arch/arm/cpu/arm926ejs/davinci/cpu.c)0
-rw-r--r--arch/arm/mach-davinci/da830_pinmux.c (renamed from arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c)0
-rw-r--r--arch/arm/mach-davinci/da850_lowlevel.c (renamed from arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c)0
-rw-r--r--arch/arm/mach-davinci/da850_pinmux.c (renamed from arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c)0
-rw-r--r--arch/arm/mach-davinci/dm355.c (renamed from arch/arm/cpu/arm926ejs/davinci/dm355.c)0
-rw-r--r--arch/arm/mach-davinci/dm365.c (renamed from arch/arm/cpu/arm926ejs/davinci/dm365.c)0
-rw-r--r--arch/arm/mach-davinci/dm365_lowlevel.c (renamed from arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c)0
-rw-r--r--arch/arm/mach-davinci/dm644x.c (renamed from arch/arm/cpu/arm926ejs/davinci/dm644x.c)0
-rw-r--r--arch/arm/mach-davinci/dm646x.c (renamed from arch/arm/cpu/arm926ejs/davinci/dm646x.c)0
-rw-r--r--arch/arm/mach-davinci/dp83848.c (renamed from arch/arm/cpu/arm926ejs/davinci/dp83848.c)2
-rw-r--r--arch/arm/mach-davinci/et1011c.c (renamed from arch/arm/cpu/arm926ejs/davinci/et1011c.c)2
-rw-r--r--arch/arm/mach-davinci/include/mach/aintc_defs.h (renamed from arch/arm/include/asm/arch-davinci/aintc_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/da850_lowlevel.h (renamed from arch/arm/include/asm/arch-davinci/da850_lowlevel.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx-usb.h (renamed from arch/arm/include/asm/arch-davinci/da8xx-usb.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/davinci_misc.h (renamed from arch/arm/include/asm/arch-davinci/davinci_misc.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/ddr2_defs.h (renamed from arch/arm/include/asm/arch-davinci/ddr2_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/dm365_lowlevel.h (renamed from arch/arm/include/asm/arch-davinci/dm365_lowlevel.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/emac_defs.h (renamed from arch/arm/include/asm/arch-davinci/emac_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h (renamed from arch/arm/include/asm/arch-davinci/gpio.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/hardware.h (renamed from arch/arm/include/asm/arch-davinci/hardware.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/i2c_defs.h (renamed from arch/arm/include/asm/arch-davinci/i2c_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/pinmux_defs.h (renamed from arch/arm/include/asm/arch-davinci/pinmux_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/pll_defs.h (renamed from arch/arm/include/asm/arch-davinci/pll_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/psc_defs.h (renamed from arch/arm/include/asm/arch-davinci/psc_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/sdmmc_defs.h (renamed from arch/arm/include/asm/arch-davinci/sdmmc_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/syscfg_defs.h (renamed from arch/arm/include/asm/arch-davinci/syscfg_defs.h)0
-rw-r--r--arch/arm/mach-davinci/include/mach/timer_defs.h (renamed from arch/arm/include/asm/arch-davinci/timer_defs.h)0
-rw-r--r--arch/arm/mach-davinci/ksz8873.c (renamed from arch/arm/cpu/arm926ejs/davinci/ksz8873.c)2
-rw-r--r--arch/arm/mach-davinci/lowlevel_init.S (renamed from arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S)0
-rw-r--r--arch/arm/mach-davinci/lxt972.c (renamed from arch/arm/cpu/arm926ejs/davinci/lxt972.c)2
-rw-r--r--arch/arm/mach-davinci/misc.c (renamed from arch/arm/cpu/arm926ejs/davinci/misc.c)0
-rw-r--r--arch/arm/mach-davinci/pinmux.c (renamed from arch/arm/cpu/arm926ejs/davinci/pinmux.c)0
-rw-r--r--arch/arm/mach-davinci/psc.c (renamed from arch/arm/cpu/arm926ejs/davinci/psc.c)0
-rw-r--r--arch/arm/mach-davinci/reset.c (renamed from arch/arm/cpu/arm926ejs/davinci/reset.c)0
-rw-r--r--arch/arm/mach-davinci/spl.c (renamed from arch/arm/cpu/arm926ejs/davinci/spl.c)0
-rw-r--r--arch/arm/mach-davinci/timer.c (renamed from arch/arm/cpu/arm926ejs/davinci/timer.c)0
-rw-r--r--arch/arm/mach-highbank/Kconfig (renamed from arch/arm/cpu/armv7/highbank/Kconfig)0
-rw-r--r--arch/arm/mach-highbank/Makefile (renamed from arch/arm/cpu/armv7/highbank/Makefile)0
-rw-r--r--arch/arm/mach-highbank/timer.c (renamed from arch/arm/cpu/armv7/highbank/timer.c)0
-rw-r--r--arch/arm/mach-keystone/Kconfig (renamed from arch/arm/cpu/armv7/keystone/Kconfig)0
-rw-r--r--arch/arm/mach-keystone/Makefile (renamed from arch/arm/cpu/armv7/keystone/Makefile)0
-rw-r--r--arch/arm/mach-keystone/clock-k2e.c (renamed from arch/arm/cpu/armv7/keystone/clock-k2e.c)0
-rw-r--r--arch/arm/mach-keystone/clock-k2hk.c (renamed from arch/arm/cpu/armv7/keystone/clock-k2hk.c)0
-rw-r--r--arch/arm/mach-keystone/clock-k2l.c (renamed from arch/arm/cpu/armv7/keystone/clock-k2l.c)0
-rw-r--r--arch/arm/mach-keystone/clock.c (renamed from arch/arm/cpu/armv7/keystone/clock.c)0
-rw-r--r--arch/arm/mach-keystone/cmd_clock.c (renamed from arch/arm/cpu/armv7/keystone/cmd_clock.c)0
-rw-r--r--arch/arm/mach-keystone/cmd_ddr3.c (renamed from arch/arm/cpu/armv7/keystone/cmd_ddr3.c)0
-rw-r--r--arch/arm/mach-keystone/cmd_mon.c (renamed from arch/arm/cpu/armv7/keystone/cmd_mon.c)0
-rw-r--r--arch/arm/mach-keystone/ddr3.c (renamed from arch/arm/cpu/armv7/keystone/ddr3.c)5
-rw-r--r--arch/arm/mach-keystone/include/mach/clock-k2e.h (renamed from arch/arm/include/asm/arch-keystone/clock-k2e.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/clock-k2hk.h (renamed from arch/arm/include/asm/arch-keystone/clock-k2hk.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/clock-k2l.h (renamed from arch/arm/include/asm/arch-keystone/clock-k2l.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/clock.h (renamed from arch/arm/include/asm/arch-keystone/clock.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/clock_defs.h (renamed from arch/arm/include/asm/arch-keystone/clock_defs.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/ddr3.h (renamed from arch/arm/include/asm/arch-keystone/ddr3.h)5
-rw-r--r--arch/arm/mach-keystone/include/mach/hardware-k2e.h (renamed from arch/arm/include/asm/arch-keystone/hardware-k2e.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/hardware-k2hk.h (renamed from arch/arm/include/asm/arch-keystone/hardware-k2hk.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/hardware-k2l.h (renamed from arch/arm/include/asm/arch-keystone/hardware-k2l.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/hardware.h (renamed from arch/arm/include/asm/arch-keystone/hardware.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/i2c_defs.h (renamed from arch/arm/include/asm/arch-keystone/i2c_defs.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/mon.h (renamed from arch/arm/include/asm/arch-keystone/mon.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/msmc.h (renamed from arch/arm/include/asm/arch-keystone/msmc.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/psc_defs.h (renamed from arch/arm/include/asm/arch-keystone/psc_defs.h)0
-rw-r--r--arch/arm/mach-keystone/include/mach/xhci-keystone.h (renamed from arch/arm/include/asm/arch-keystone/xhci-keystone.h)0
-rw-r--r--arch/arm/mach-keystone/init.c (renamed from arch/arm/cpu/armv7/keystone/init.c)0
-rw-r--r--arch/arm/mach-keystone/keystone.c (renamed from arch/arm/cpu/armv7/keystone/keystone.c)0
-rw-r--r--arch/arm/mach-keystone/msmc.c (renamed from arch/arm/cpu/armv7/keystone/msmc.c)0
-rw-r--r--arch/arm/mach-keystone/psc.c (renamed from arch/arm/cpu/armv7/keystone/psc.c)0
-rw-r--r--arch/arm/mach-kirkwood/Kconfig (renamed from arch/arm/cpu/arm926ejs/kirkwood/Kconfig)0
-rw-r--r--arch/arm/mach-kirkwood/Makefile (renamed from arch/arm/cpu/arm926ejs/kirkwood/Makefile)0
-rw-r--r--arch/arm/mach-kirkwood/cache.c (renamed from arch/arm/cpu/arm926ejs/kirkwood/cache.c)0
-rw-r--r--arch/arm/mach-kirkwood/cpu.c (renamed from arch/arm/cpu/arm926ejs/kirkwood/cpu.c)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/config.h (renamed from arch/arm/include/asm/arch-kirkwood/config.h)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/cpu.h (renamed from arch/arm/include/asm/arch-kirkwood/cpu.h)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/gpio.h (renamed from arch/arm/include/asm/arch-kirkwood/gpio.h)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kw88f6192.h (renamed from arch/arm/include/asm/arch-kirkwood/kw88f6192.h)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kw88f6281.h (renamed from arch/arm/include/asm/arch-kirkwood/kw88f6281.h)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/mpp.h (renamed from arch/arm/include/asm/arch-kirkwood/mpp.h)0
-rw-r--r--arch/arm/mach-kirkwood/include/mach/soc.h (renamed from arch/arm/include/asm/arch-kirkwood/soc.h)0
-rw-r--r--arch/arm/mach-kirkwood/mpp.c (renamed from arch/arm/cpu/arm926ejs/kirkwood/mpp.c)0
-rw-r--r--arch/arm/mach-nomadik/Kconfig (renamed from arch/arm/cpu/arm926ejs/nomadik/Kconfig)0
-rw-r--r--arch/arm/mach-nomadik/Makefile (renamed from arch/arm/cpu/arm926ejs/nomadik/Makefile)0
-rw-r--r--arch/arm/mach-nomadik/gpio.c (renamed from arch/arm/cpu/arm926ejs/nomadik/gpio.c)0
-rw-r--r--arch/arm/mach-nomadik/include/mach/gpio.h (renamed from arch/arm/include/asm/arch-nomadik/gpio.h)0
-rw-r--r--arch/arm/mach-nomadik/include/mach/mtu.h (renamed from arch/arm/include/asm/arch-nomadik/mtu.h)0
-rw-r--r--arch/arm/mach-nomadik/reset.S (renamed from arch/arm/cpu/arm926ejs/nomadik/reset.S)0
-rw-r--r--arch/arm/mach-nomadik/timer.c (renamed from arch/arm/cpu/arm926ejs/nomadik/timer.c)0
-rw-r--r--arch/arm/mach-orion5x/Kconfig (renamed from arch/arm/cpu/arm926ejs/orion5x/Kconfig)0
-rw-r--r--arch/arm/mach-orion5x/Makefile (renamed from arch/arm/cpu/arm926ejs/orion5x/Makefile)0
-rw-r--r--arch/arm/mach-orion5x/cpu.c (renamed from arch/arm/cpu/arm926ejs/orion5x/cpu.c)0
-rw-r--r--arch/arm/mach-orion5x/dram.c (renamed from arch/arm/cpu/arm926ejs/orion5x/dram.c)0
-rw-r--r--arch/arm/mach-orion5x/include/mach/cpu.h (renamed from arch/arm/include/asm/arch-orion5x/cpu.h)0
-rw-r--r--arch/arm/mach-orion5x/include/mach/mv88f5182.h (renamed from arch/arm/include/asm/arch-orion5x/mv88f5182.h)0
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h (renamed from arch/arm/include/asm/arch-orion5x/orion5x.h)0
-rw-r--r--arch/arm/mach-orion5x/lowlevel_init.S (renamed from arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S)0
-rw-r--r--arch/arm/mach-orion5x/timer.c (renamed from arch/arm/cpu/arm926ejs/orion5x/timer.c)0
-rw-r--r--arch/arm/mach-tegra/Kconfig52
-rw-r--r--arch/arm/mach-tegra/Makefile (renamed from arch/arm/cpu/tegra-common/Makefile)12
-rw-r--r--arch/arm/mach-tegra/ap.c (renamed from arch/arm/cpu/tegra-common/ap.c)0
-rw-r--r--arch/arm/mach-tegra/board.c (renamed from arch/arm/cpu/tegra-common/board.c)0
-rw-r--r--arch/arm/mach-tegra/cache.c (renamed from arch/arm/cpu/tegra-common/cache.c)0
-rw-r--r--arch/arm/mach-tegra/clock.c (renamed from arch/arm/cpu/tegra-common/clock.c)0
-rw-r--r--arch/arm/mach-tegra/cmd_enterrcm.c (renamed from arch/arm/cpu/armv7/tegra-common/cmd_enterrcm.c)0
-rw-r--r--arch/arm/mach-tegra/cpu.c (renamed from arch/arm/cpu/arm720t/tegra-common/cpu.c)0
-rw-r--r--arch/arm/mach-tegra/cpu.h (renamed from arch/arm/cpu/arm720t/tegra-common/cpu.h)0
-rw-r--r--arch/arm/mach-tegra/lowlevel_init.S (renamed from arch/arm/cpu/tegra-common/lowlevel_init.S)0
-rw-r--r--arch/arm/mach-tegra/pinmux-common.c (renamed from arch/arm/cpu/tegra-common/pinmux-common.c)0
-rw-r--r--arch/arm/mach-tegra/powergate.c (renamed from arch/arm/cpu/tegra-common/powergate.c)0
-rw-r--r--arch/arm/mach-tegra/spl.c (renamed from arch/arm/cpu/arm720t/tegra-common/spl.c)0
-rw-r--r--arch/arm/mach-tegra/sys_info.c (renamed from arch/arm/cpu/tegra-common/sys_info.c)0
-rw-r--r--arch/arm/mach-tegra/tegra114/Kconfig (renamed from arch/arm/cpu/armv7/tegra114/Kconfig)0
-rw-r--r--arch/arm/mach-tegra/tegra114/Makefile (renamed from arch/arm/cpu/tegra114-common/Makefile)5
-rw-r--r--arch/arm/mach-tegra/tegra114/clock.c (renamed from arch/arm/cpu/tegra114-common/clock.c)0
-rw-r--r--arch/arm/mach-tegra/tegra114/cpu.c (renamed from arch/arm/cpu/arm720t/tegra114/cpu.c)2
-rw-r--r--arch/arm/mach-tegra/tegra114/funcmux.c (renamed from arch/arm/cpu/tegra114-common/funcmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra114/pinmux.c (renamed from arch/arm/cpu/tegra114-common/pinmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra124/Kconfig (renamed from arch/arm/cpu/armv7/tegra124/Kconfig)0
-rw-r--r--arch/arm/mach-tegra/tegra124/Makefile (renamed from arch/arm/cpu/tegra124-common/Makefile)2
-rw-r--r--arch/arm/mach-tegra/tegra124/clock.c (renamed from arch/arm/cpu/tegra124-common/clock.c)0
-rw-r--r--arch/arm/mach-tegra/tegra124/cpu.c (renamed from arch/arm/cpu/arm720t/tegra124/cpu.c)2
-rw-r--r--arch/arm/mach-tegra/tegra124/funcmux.c (renamed from arch/arm/cpu/tegra124-common/funcmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra124/pinmux.c (renamed from arch/arm/cpu/tegra124-common/pinmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra124/xusb-padctl.c (renamed from arch/arm/cpu/tegra124-common/xusb-padctl.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/Kconfig (renamed from arch/arm/cpu/armv7/tegra20/Kconfig)0
-rw-r--r--arch/arm/mach-tegra/tegra20/Makefile (renamed from arch/arm/cpu/tegra20-common/Makefile)10
-rw-r--r--arch/arm/mach-tegra/tegra20/clock.c (renamed from arch/arm/cpu/tegra20-common/clock.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/cpu.c (renamed from arch/arm/cpu/arm720t/tegra20/cpu.c)2
-rw-r--r--arch/arm/mach-tegra/tegra20/crypto.c (renamed from arch/arm/cpu/tegra20-common/crypto.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/crypto.h (renamed from arch/arm/cpu/tegra20-common/crypto.h)0
-rw-r--r--arch/arm/mach-tegra/tegra20/display.c (renamed from arch/arm/cpu/armv7/tegra20/display.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/emc.c (renamed from arch/arm/cpu/tegra20-common/emc.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/funcmux.c (renamed from arch/arm/cpu/tegra20-common/funcmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/pinmux.c (renamed from arch/arm/cpu/tegra20-common/pinmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/pmu.c (renamed from arch/arm/cpu/tegra20-common/pmu.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/pwm.c (renamed from arch/arm/cpu/armv7/tegra20/pwm.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/warmboot.c (renamed from arch/arm/cpu/tegra20-common/warmboot.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/warmboot_avp.c (renamed from arch/arm/cpu/tegra20-common/warmboot_avp.c)0
-rw-r--r--arch/arm/mach-tegra/tegra20/warmboot_avp.h (renamed from arch/arm/cpu/tegra20-common/warmboot_avp.h)0
-rw-r--r--arch/arm/mach-tegra/tegra30/Kconfig (renamed from arch/arm/cpu/armv7/tegra30/Kconfig)0
-rw-r--r--arch/arm/mach-tegra/tegra30/Makefile (renamed from arch/arm/cpu/tegra30-common/Makefile)5
-rw-r--r--arch/arm/mach-tegra/tegra30/clock.c (renamed from arch/arm/cpu/tegra30-common/clock.c)0
-rw-r--r--arch/arm/mach-tegra/tegra30/cpu.c (renamed from arch/arm/cpu/arm720t/tegra30/cpu.c)2
-rw-r--r--arch/arm/mach-tegra/tegra30/funcmux.c (renamed from arch/arm/cpu/tegra30-common/funcmux.c)0
-rw-r--r--arch/arm/mach-tegra/tegra30/pinmux.c (renamed from arch/arm/cpu/tegra30-common/pinmux.c)0
-rw-r--r--arch/arm/mach-tegra/vpr.c (renamed from arch/arm/cpu/tegra-common/vpr.c)0
-rw-r--r--arch/arm/mach-tegra/xusb-padctl.c (renamed from arch/arm/cpu/tegra-common/xusb-padctl.c)0
-rw-r--r--arch/arm/mach-versatile/Kconfig (renamed from arch/arm/cpu/arm926ejs/versatile/Kconfig)0
-rw-r--r--arch/arm/mach-versatile/Makefile (renamed from arch/arm/cpu/arm926ejs/versatile/Makefile)0
-rw-r--r--arch/arm/mach-versatile/reset.S (renamed from arch/arm/cpu/arm926ejs/versatile/reset.S)0
-rw-r--r--arch/arm/mach-versatile/timer.c (renamed from arch/arm/cpu/arm926ejs/versatile/timer.c)0
-rw-r--r--arch/avr32/config.mk3
-rw-r--r--arch/avr32/cpu/Makefile1
-rw-r--r--arch/avr32/cpu/at32ap700x/mmu.c8
-rw-r--r--arch/avr32/cpu/cpu.c2
-rw-r--r--arch/avr32/cpu/exception.c6
-rw-r--r--arch/avr32/cpu/mmc.c16
-rw-r--r--arch/avr32/cpu/u-boot.lds2
-rw-r--r--arch/avr32/include/asm/arch-at32ap700x/mmu.h6
-rw-r--r--arch/avr32/include/asm/config.h1
-rw-r--r--arch/avr32/include/asm/dma-mapping.h7
-rw-r--r--arch/avr32/include/asm/global_data.h1
-rw-r--r--arch/avr32/include/asm/u-boot.h10
-rw-r--r--arch/avr32/lib/Makefile3
-rw-r--r--arch/avr32/lib/board.c83
-rw-r--r--arch/avr32/lib/dram_init.c17
-rw-r--r--arch/avr32/lib/interrupts.c5
-rw-r--r--arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c8
-rw-r--r--arch/powerpc/cpu/ppc4xx/config.mk5
-rw-r--r--arch/powerpc/cpu/ppc4xx/cpu_init.c2
-rw-r--r--arch/powerpc/cpu/ppc4xx/start.S18
-rw-r--r--arch/powerpc/cpu/ppc4xx/u-boot.lds8
-rw-r--r--arch/powerpc/dts/Makefile11
-rw-r--r--arch/powerpc/dts/arches.dts339
-rw-r--r--arch/powerpc/dts/canyonlands.dts561
-rw-r--r--arch/powerpc/dts/glacier.dts582
-rw-r--r--arch/powerpc/include/asm/arch-ppc4xx/gpio.h7
-rw-r--r--arch/powerpc/include/asm/linkage.h7
-rw-r--r--arch/powerpc/include/asm/ppc460ex_gt.h2
-rw-r--r--arch/powerpc/lib/Makefile1
-rw-r--r--arch/powerpc/lib/stack.c31
-rw-r--r--arch/sandbox/Kconfig24
-rw-r--r--arch/sandbox/config.mk12
-rw-r--r--arch/sandbox/cpu/start.c6
-rw-r--r--arch/sandbox/cpu/state.c5
-rw-r--r--arch/sandbox/include/asm/state.h15
-rw-r--r--arch/x86/Kconfig15
-rw-r--r--board/BuS/eb_cpux9k2/Kconfig3
-rw-r--r--board/BuS/vl_ma2sc/Kconfig3
-rw-r--r--board/Marvell/dkb/Kconfig15
-rw-r--r--board/Marvell/dkb/MAINTAINERS6
-rw-r--r--board/Marvell/dkb/Makefile9
-rw-r--r--board/Marvell/dkb/dkb.c85
-rw-r--r--board/afeb9260/Kconfig3
-rw-r--r--board/amcc/canyonlands/Kconfig38
-rw-r--r--board/amcc/canyonlands/MAINTAINERS1
-rw-r--r--board/amcc/canyonlands/config.mk2
-rw-r--r--board/amcc/canyonlands/u-boot-ram.lds85
-rw-r--r--board/atmel/at91rm9200ek/Kconfig3
-rw-r--r--board/atmel/at91sam9260ek/Kconfig3
-rw-r--r--board/atmel/at91sam9261ek/Kconfig3
-rw-r--r--board/atmel/at91sam9263ek/Kconfig3
-rw-r--r--board/atmel/at91sam9m10g45ek/Kconfig3
-rw-r--r--board/atmel/at91sam9n12ek/Kconfig3
-rw-r--r--board/atmel/at91sam9rlek/Kconfig3
-rw-r--r--board/atmel/at91sam9x5ek/Kconfig3
-rw-r--r--board/atmel/atngw100/atngw100.c32
-rw-r--r--board/atmel/atngw100mkii/atngw100mkii.c39
-rw-r--r--board/atmel/atstk1000/atstk1000.c33
-rw-r--r--board/atmel/sama5d3_xplained/Kconfig3
-rw-r--r--board/atmel/sama5d3xek/Kconfig3
-rw-r--r--board/atmel/sama5d4_xplained/Kconfig3
-rw-r--r--board/atmel/sama5d4ek/Kconfig3
-rw-r--r--board/bluewater/snapper9260/Kconfig3
-rw-r--r--board/buffalo/lsxl/README139
-rw-r--r--board/calao/sbc35_a9g20/Kconfig3
-rw-r--r--board/calao/tny_a9260/Kconfig3
-rw-r--r--board/calao/usb_a9263/Kconfig3
-rw-r--r--board/cm4008/Kconfig12
-rw-r--r--board/cm4008/MAINTAINERS6
-rw-r--r--board/cm4008/Makefile8
-rw-r--r--board/cm4008/cm4008.c88
-rw-r--r--board/cm4008/config.mk1
-rw-r--r--board/cm4008/flash.c395
-rw-r--r--board/cm41xx/Kconfig12
-rw-r--r--board/cm41xx/MAINTAINERS6
-rw-r--r--board/cm41xx/Makefile8
-rw-r--r--board/cm41xx/cm41xx.c88
-rw-r--r--board/cm41xx/config.mk1
-rw-r--r--board/cm41xx/flash.c395
-rw-r--r--board/compulab/cm_t335/Kconfig9
-rw-r--r--board/davinci/da8xxevm/Kconfig13
-rw-r--r--board/davinci/da8xxevm/MAINTAINERS8
-rw-r--r--board/davinci/da8xxevm/Makefile1
-rw-r--r--board/davinci/da8xxevm/README.hawkboard92
-rw-r--r--board/davinci/da8xxevm/hawkboard-ais-nand.cfg4
-rw-r--r--board/davinci/da8xxevm/hawkboard.c120
-rw-r--r--board/davinci/da8xxevm/u-boot-spl-hawk.lds69
-rw-r--r--board/earthlcd/favr-32-ezkit/favr-32-ezkit.c33
-rw-r--r--board/egnite/ethernut5/Kconfig3
-rw-r--r--board/esd/meesc/Kconfig3
-rw-r--r--board/esd/otc570/Kconfig3
-rw-r--r--board/eukrea/cpu9260/Kconfig3
-rw-r--r--board/eukrea/cpuat91/Kconfig3
-rw-r--r--board/faraday/a320evb/Kconfig15
-rw-r--r--board/faraday/a320evb/MAINTAINERS6
-rw-r--r--board/faraday/a320evb/Makefile9
-rw-r--r--board/faraday/a320evb/a320evb.c59
-rw-r--r--board/faraday/a320evb/lowlevel_init.S106
-rw-r--r--board/freescale/common/ls102xa_stream_id.c15
-rw-r--r--board/freescale/ls1021aqds/ls1021aqds.c21
-rw-r--r--board/freescale/ls1021atwr/ls1021atwr.c21
-rw-r--r--board/freescale/ls2085a/ddr.c1
-rw-r--r--board/freescale/ls2085a/ls2085a.c29
-rw-r--r--board/gumstix/pepper/Kconfig9
-rw-r--r--board/in-circuit/grasshopper/grasshopper.c32
-rw-r--r--board/isee/igep0033/Kconfig9
-rw-r--r--board/keymile/common/common.h3
-rw-r--r--board/keymile/common/ivm.c77
-rw-r--r--board/keymile/km82xx/km82xx.c10
-rw-r--r--board/keymile/km83xx/km83xx.c5
-rw-r--r--board/keymile/km_arm/km_arm.c6
-rw-r--r--board/keymile/kmp204x/kmp204x.c5
-rw-r--r--board/mimc/mimc200/mimc200.c38
-rw-r--r--board/miromico/hammerhead/hammerhead.c32
-rw-r--r--board/nokia/rx51/lowlevel_init.S3
-rw-r--r--board/phytec/pcm051/Kconfig9
-rw-r--r--board/raspberrypi/rpi/Makefile12
-rw-r--r--board/raspberrypi/rpi/rpi.c40
-rw-r--r--board/raspberrypi/rpi_2/Kconfig15
-rw-r--r--board/raspberrypi/rpi_2/MAINTAINERS6
-rw-r--r--board/raspberrypi/rpi_2/Makefile7
-rw-r--r--board/renesas/silk/Kconfig12
-rw-r--r--board/renesas/silk/MAINTAINERS6
-rw-r--r--board/renesas/silk/Makefile10
-rw-r--r--board/renesas/silk/qos.c951
-rw-r--r--board/renesas/silk/qos.h13
-rw-r--r--board/renesas/silk/silk.c163
-rw-r--r--board/ronetix/pm9261/Kconfig3
-rw-r--r--board/ronetix/pm9263/Kconfig3
-rw-r--r--board/ronetix/pm9g45/Kconfig3
-rw-r--r--board/samsung/common/board.c28
-rw-r--r--board/samsung/goni/Kconfig9
-rw-r--r--board/samsung/odroid/odroid.c12
-rw-r--r--board/samsung/smdk5420/Kconfig6
-rw-r--r--board/samsung/smdkc100/Kconfig9
-rw-r--r--board/siemens/corvus/Kconfig3
-rw-r--r--board/siemens/taurus/Kconfig3
-rw-r--r--board/silica/pengwyn/Kconfig9
-rw-r--r--board/sunxi/Kconfig58
-rw-r--r--board/sunxi/MAINTAINERS7
-rw-r--r--board/sunxi/board.c10
-rw-r--r--board/syteco/jadecpu/Kconfig15
-rw-r--r--board/syteco/jadecpu/MAINTAINERS6
-rw-r--r--board/syteco/jadecpu/Makefile13
-rw-r--r--board/syteco/jadecpu/jadecpu.c160
-rw-r--r--board/syteco/jadecpu/lowlevel_init.S249
-rw-r--r--board/taskit/stamp9g20/Kconfig3
-rw-r--r--board/ti/am335x/Kconfig16
-rw-r--r--board/ti/beagle_x15/board.c6
-rw-r--r--board/ti/ks2_evm/board.c6
-rw-r--r--board/ti/ks2_evm/ddr3_k2e.c14
-rw-r--r--board/ti/ks2_evm/ddr3_k2hk.c11
-rw-r--r--board/ti/ks2_evm/ddr3_k2l.c12
-rw-r--r--board/ti/tnetv107xevm/Kconfig15
-rw-r--r--board/ti/tnetv107xevm/MAINTAINERS6
-rw-r--r--board/ti/tnetv107xevm/Makefile5
-rw-r--r--board/ti/tnetv107xevm/config.mk5
-rw-r--r--board/ti/tnetv107xevm/sdb_board.c134
-rw-r--r--common/Kconfig24
-rw-r--r--common/board_f.c64
-rw-r--r--common/board_r.c28
-rw-r--r--common/bootm.c2
-rw-r--r--common/cmd_bdinfo.c4
-rw-r--r--common/cmd_blob.c18
-rw-r--r--common/cmd_demo.c4
-rw-r--r--common/cmd_fdt.c10
-rw-r--r--common/cmd_i2c.c75
-rw-r--r--common/cmd_mmc.c8
-rw-r--r--common/hash.c10
-rw-r--r--common/image-fdt.c2
-rw-r--r--common/image-fit.c4
-rw-r--r--common/image-sig.c16
-rw-r--r--common/malloc_simple.c2
-rw-r--r--common/spl/spl.c5
-rw-r--r--common/spl/spl_nor.c2
-rw-r--r--config.mk5
-rw-r--r--configs/Ampe_A76_defconfig16
-rw-r--r--configs/Chuwi_V7_CW0825_defconfig1
-rw-r--r--configs/Hyundai_A7HD_defconfig1
-rw-r--r--configs/Inet_86VS_defconfig1
-rw-r--r--configs/Linksprite_pcDuino3_fdt_defconfig4
-rw-r--r--configs/TZX-Q8-713B7_defconfig1
-rw-r--r--configs/UTOO_P66_defconfig21
-rw-r--r--configs/a320evb_defconfig2
-rw-r--r--configs/afeb9260_defconfig1
-rw-r--r--configs/am335x_igep0033_defconfig2
-rw-r--r--configs/am3517_crane_defconfig3
-rw-r--r--configs/am3517_evm_defconfig3
-rw-r--r--configs/arches_defconfig5
-rw-r--r--configs/at91rm9200ek_defconfig1
-rw-r--r--configs/at91rm9200ek_ram_defconfig1
-rw-r--r--configs/at91sam9260ek_dataflash_cs0_defconfig1
-rw-r--r--configs/at91sam9260ek_dataflash_cs1_defconfig1
-rw-r--r--configs/at91sam9260ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9261ek_dataflash_cs0_defconfig1
-rw-r--r--configs/at91sam9261ek_dataflash_cs3_defconfig1
-rw-r--r--configs/at91sam9261ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9263ek_dataflash_cs0_defconfig1
-rw-r--r--configs/at91sam9263ek_dataflash_defconfig1
-rw-r--r--configs/at91sam9263ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9263ek_norflash_boot_defconfig1
-rw-r--r--configs/at91sam9263ek_norflash_defconfig1
-rw-r--r--configs/at91sam9g10ek_dataflash_cs0_defconfig1
-rw-r--r--configs/at91sam9g10ek_dataflash_cs3_defconfig1
-rw-r--r--configs/at91sam9g10ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9g20ek_2mmc_defconfig1
-rw-r--r--configs/at91sam9g20ek_2mmc_nandflash_defconfig1
-rw-r--r--configs/at91sam9g20ek_dataflash_cs0_defconfig1
-rw-r--r--configs/at91sam9g20ek_dataflash_cs1_defconfig1
-rw-r--r--configs/at91sam9g20ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9m10g45ek_mmc_defconfig1
-rw-r--r--configs/at91sam9m10g45ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9n12ek_mmc_defconfig1
-rw-r--r--configs/at91sam9n12ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9n12ek_spiflash_defconfig1
-rw-r--r--configs/at91sam9rlek_dataflash_defconfig1
-rw-r--r--configs/at91sam9rlek_nandflash_defconfig1
-rw-r--r--configs/at91sam9x5ek_dataflash_defconfig1
-rw-r--r--configs/at91sam9x5ek_mmc_defconfig1
-rw-r--r--configs/at91sam9x5ek_nandflash_defconfig1
-rw-r--r--configs/at91sam9x5ek_spiflash_defconfig1
-rw-r--r--configs/at91sam9xeek_dataflash_cs0_defconfig1
-rw-r--r--configs/at91sam9xeek_dataflash_cs1_defconfig1
-rw-r--r--configs/at91sam9xeek_nandflash_defconfig1
-rw-r--r--configs/axm_defconfig1
-rw-r--r--configs/axs103_defconfig5
-rw-r--r--configs/canyonlands_defconfig5
-rw-r--r--configs/cm4008_defconfig2
-rw-r--r--configs/cm41xx_defconfig2
-rw-r--r--configs/cm_fx6_defconfig5
-rw-r--r--configs/cm_t335_defconfig2
-rw-r--r--configs/cm_t3517_defconfig3
-rw-r--r--configs/cm_t35_defconfig3
-rw-r--r--configs/corvus_defconfig1
-rw-r--r--configs/cpu9260_128M_defconfig1
-rw-r--r--configs/cpu9260_defconfig1
-rw-r--r--configs/cpu9260_nand_128M_defconfig1
-rw-r--r--configs/cpu9260_nand_defconfig1
-rw-r--r--configs/cpu9G20_128M_defconfig1
-rw-r--r--configs/cpu9G20_defconfig1
-rw-r--r--configs/cpu9G20_nand_128M_defconfig1
-rw-r--r--configs/cpu9G20_nand_defconfig1
-rw-r--r--configs/cpuat91_defconfig1
-rw-r--r--configs/cpuat91_ram_defconfig1
-rw-r--r--configs/devkit8000_defconfig3
-rw-r--r--configs/dig297_defconfig3
-rw-r--r--configs/dkb_defconfig2
-rw-r--r--configs/eb_cpux9k2_defconfig1
-rw-r--r--configs/eb_cpux9k2_ram_defconfig1
-rw-r--r--configs/eco5pk_defconfig3
-rw-r--r--configs/ethernut5_defconfig1
-rw-r--r--configs/glacier_defconfig5
-rw-r--r--configs/glacier_ramboot_defconfig8
-rw-r--r--configs/gwventana_defconfig2
-rw-r--r--configs/hawkboard_defconfig4
-rw-r--r--configs/hawkboard_uart_defconfig5
-rw-r--r--configs/jadecpu_defconfig2
-rw-r--r--configs/mcx_defconfig3
-rw-r--r--configs/meesc_dataflash_defconfig1
-rw-r--r--configs/meesc_defconfig1
-rw-r--r--configs/minnowmax_defconfig2
-rw-r--r--configs/mt_ventoux_defconfig3
-rw-r--r--configs/mx6dlsabreauto_defconfig4
-rw-r--r--configs/mx6dlsabresd_defconfig2
-rw-r--r--configs/mx6qsabreauto_defconfig4
-rw-r--r--configs/mx6qsabrelite_defconfig2
-rw-r--r--configs/mx6qsabresd_defconfig4
-rw-r--r--configs/mx6sabresd_spl_defconfig3
-rw-r--r--configs/mx6sxsabresd_defconfig4
-rw-r--r--configs/mx6sxsabresd_spl_defconfig2
-rw-r--r--configs/nokia_rx51_defconfig5
-rw-r--r--configs/odroid_defconfig2
-rw-r--r--configs/omap3_beagle_defconfig3
-rw-r--r--configs/omap3_evm_defconfig3
-rw-r--r--configs/omap3_evm_quick_mmc_defconfig3
-rw-r--r--configs/omap3_evm_quick_nand_defconfig3
-rw-r--r--configs/omap3_ha_defconfig3
-rw-r--r--configs/omap3_logic_defconfig3
-rw-r--r--configs/omap3_mvblx_defconfig3
-rw-r--r--configs/omap3_pandora_defconfig3
-rw-r--r--configs/omap3_sdp3430_defconfig3
-rw-r--r--configs/otc570_dataflash_defconfig1
-rw-r--r--configs/otc570_defconfig1
-rw-r--r--configs/pcm051_rev1_defconfig2
-rw-r--r--configs/pcm051_rev3_defconfig2
-rw-r--r--configs/peach-pi_defconfig4
-rw-r--r--configs/peach-pit_defconfig4
-rw-r--r--configs/pengwyn_defconfig2
-rw-r--r--configs/pepper_defconfig2
-rw-r--r--configs/ph1_ld4_defconfig2
-rw-r--r--configs/ph1_pro4_defconfig2
-rw-r--r--configs/ph1_sld8_defconfig2
-rw-r--r--configs/pm9261_defconfig1
-rw-r--r--configs/pm9263_defconfig1
-rw-r--r--configs/pm9g45_defconfig1
-rw-r--r--configs/portuxg20_defconfig1
-rw-r--r--configs/rpi_2_defconfig4
-rw-r--r--configs/rpi_defconfig2
-rw-r--r--configs/s5p_goni_defconfig2
-rw-r--r--configs/sama5d3_xplained_mmc_defconfig1
-rw-r--r--configs/sama5d3_xplained_nandflash_defconfig1
-rw-r--r--configs/sama5d3xek_mmc_defconfig1
-rw-r--r--configs/sama5d3xek_nandflash_defconfig1
-rw-r--r--configs/sama5d3xek_spiflash_defconfig1
-rw-r--r--configs/sama5d4_xplained_mmc_defconfig1
-rw-r--r--configs/sama5d4_xplained_nandflash_defconfig1
-rw-r--r--configs/sama5d4_xplained_spiflash_defconfig1
-rw-r--r--configs/sama5d4ek_mmc_defconfig1
-rw-r--r--configs/sama5d4ek_nandflash_defconfig1
-rw-r--r--configs/sama5d4ek_spiflash_defconfig1
-rw-r--r--configs/sandbox_defconfig7
-rw-r--r--configs/sbc35_a9g20_eeprom_defconfig1
-rw-r--r--configs/sbc35_a9g20_nandflash_defconfig1
-rw-r--r--configs/silk_defconfig3
-rw-r--r--configs/smdkc100_defconfig2
-rw-r--r--configs/snapper9260_defconfig6
-rw-r--r--configs/snapper9g20_defconfig6
-rw-r--r--configs/snow_defconfig5
-rw-r--r--configs/socfpga_socrates_defconfig3
-rw-r--r--configs/stamp9g20_defconfig1
-rw-r--r--configs/stv0991_defconfig4
-rw-r--r--configs/tao3530_defconfig3
-rw-r--r--configs/taurus_defconfig1
-rw-r--r--configs/tnetv107x_evm_defconfig2
-rw-r--r--configs/tny_a9260_eeprom_defconfig1
-rw-r--r--configs/tny_a9260_nandflash_defconfig1
-rw-r--r--configs/tny_a9g20_eeprom_defconfig1
-rw-r--r--configs/tny_a9g20_nandflash_defconfig1
-rw-r--r--configs/tricorder_defconfig3
-rw-r--r--configs/tricorder_flash_defconfig3
-rw-r--r--configs/twister_defconfig3
-rw-r--r--configs/usb_a9263_dataflash_defconfig1
-rw-r--r--configs/vl_ma2sc_defconfig1
-rw-r--r--configs/vl_ma2sc_ram_defconfig1
-rw-r--r--doc/README.fsl-trustzone-components25
-rw-r--r--doc/README.kconfig132
-rw-r--r--doc/README.scrapyard41
-rw-r--r--doc/device-tree-bindings/exynos/emmc-reset.txt15
-rw-r--r--doc/device-tree-bindings/gpio/gpio.txt5
-rw-r--r--doc/driver-model/spi-howto.txt4
-rw-r--r--drivers/Kconfig4
-rw-r--r--drivers/core/Kconfig48
-rw-r--r--drivers/core/device.c12
-rw-r--r--drivers/core/root.c64
-rw-r--r--drivers/crypto/fsl/fsl_blob.c4
-rw-r--r--drivers/crypto/fsl/fsl_hash.c138
-rw-r--r--drivers/crypto/fsl/fsl_hash.h34
-rw-r--r--drivers/ddr/fsl/arm_ddr_gen3.c2
-rw-r--r--drivers/ddr/fsl/ctrl_regs.c216
-rw-r--r--drivers/ddr/fsl/ddr1_dimm_params.c18
-rw-r--r--drivers/ddr/fsl/ddr2_dimm_params.c12
-rw-r--r--drivers/ddr/fsl/ddr3_dimm_params.c8
-rw-r--r--drivers/ddr/fsl/ddr4_dimm_params.c8
-rw-r--r--drivers/ddr/fsl/fsl_ddr_gen4.c36
-rw-r--r--drivers/ddr/fsl/lc_common_dimm_params.c27
-rw-r--r--drivers/ddr/fsl/main.c29
-rw-r--r--drivers/ddr/fsl/mpc85xx_ddr_gen3.c4
-rw-r--r--drivers/ddr/fsl/options.c6
-rw-r--r--drivers/ddr/fsl/util.c67
-rw-r--r--drivers/demo/Kconfig26
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/at91_gpio.c10
-rw-r--r--drivers/gpio/mxc_gpio.c84
-rw-r--r--drivers/gpio/omap_gpio.c2
-rw-r--r--drivers/i2c/Kconfig21
-rw-r--r--drivers/i2c/adi_i2c.c6
-rw-r--r--drivers/i2c/i2c-uclass.c11
-rw-r--r--drivers/i2c/kona_i2c.c16
-rw-r--r--drivers/i2c/mv_i2c.c10
-rw-r--r--drivers/i2c/s3c24x0_i2c.c4
-rw-r--r--drivers/input/Kconfig6
-rw-r--r--drivers/misc/Kconfig55
-rw-r--r--drivers/mmc/dw_mmc.c2
-rw-r--r--drivers/mmc/exynos_dw_mmc.c71
-rw-r--r--drivers/mmc/fsl_esdhc.c8
-rw-r--r--drivers/mmc/mmc.c8
-rw-r--r--drivers/mmc/sdhci.c3
-rw-r--r--drivers/mmc/sunxi_mmc.c6
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/mtd/nand/Kconfig6
-rw-r--r--drivers/mtd/nand/omap_gpmc.c5
-rw-r--r--drivers/mtd/spi/Kconfig14
-rw-r--r--drivers/net/Makefile3
-rw-r--r--drivers/net/fsl-mc/Makefile (renamed from drivers/net/fsl_mc/Makefile)4
-rw-r--r--drivers/net/fsl-mc/dpmng.c91
-rw-r--r--drivers/net/fsl-mc/fsl_dpmng_cmd.h49
-rw-r--r--drivers/net/fsl-mc/mc.c (renamed from drivers/net/fsl_mc/mc.c)132
-rw-r--r--drivers/net/fsl-mc/mc_sys.c63
-rw-r--r--drivers/net/keystone_net.c4
-rw-r--r--drivers/net/ks8695eth.c229
-rw-r--r--drivers/pci/pci_auto.c36
-rw-r--r--drivers/pci/pcie_layerscape.c471
-rw-r--r--drivers/serial/Kconfig65
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/ns16550.c98
-rw-r--r--drivers/serial/serial-uclass.c16
-rw-r--r--drivers/serial/serial.c2
-rw-r--r--drivers/serial/serial_ks8695.c121
-rw-r--r--drivers/serial/serial_ppc.c40
-rw-r--r--drivers/serial/serial_sh.c321
-rw-r--r--drivers/serial/serial_sh.h30
-rw-r--r--drivers/spi/Kconfig10
-rw-r--r--drivers/thermal/Kconfig7
-rw-r--r--drivers/usb/musb-new/sunxi.c42
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/mb86r0xgdc.c168
-rw-r--r--drivers/video/sunxi_display.c54
-rw-r--r--drivers/watchdog/Makefile1
-rw-r--r--drivers/watchdog/tnetv107x_wdt.c165
-rw-r--r--dts/Kconfig1
-rw-r--r--include/asm-generic/u-boot.h4
-rw-r--r--include/common.h18
-rw-r--r--include/config_defaults.h6
-rw-r--r--include/config_distro_bootcmd.h4
-rw-r--r--include/config_uncmd_spl.h13
-rw-r--r--include/configs/a320evb.h211
-rw-r--r--include/configs/amcc-common.h2
-rw-r--r--include/configs/atngw100.h1
-rw-r--r--include/configs/atngw100mkii.h1
-rw-r--r--include/configs/atstk1002.h5
-rw-r--r--include/configs/atstk1006.h1
-rw-r--r--include/configs/canyonlands.h38
-rw-r--r--include/configs/cm4008.h104
-rw-r--r--include/configs/cm41xx.h104
-rw-r--r--include/configs/cm_fx6.h7
-rw-r--r--include/configs/dkb.h51
-rw-r--r--include/configs/exynos-common.h7
-rw-r--r--include/configs/exynos5-common.h2
-rw-r--r--include/configs/exynos5-dt-common.h3
-rw-r--r--include/configs/favr-32-ezkit.h1
-rw-r--r--include/configs/grasshopper.h5
-rw-r--r--include/configs/gw_ventana.h1
-rw-r--r--include/configs/hammerhead.h1
-rw-r--r--include/configs/hawkboard.h220
-rw-r--r--include/configs/imx31_phycore.h2
-rw-r--r--include/configs/jadecpu.h273
-rw-r--r--include/configs/km/km_arm.h2
-rw-r--r--include/configs/km82xx.h2
-rw-r--r--include/configs/ls1021aqds.h24
-rw-r--r--include/configs/ls1021atwr.h24
-rw-r--r--include/configs/ls2085a_common.h19
-rw-r--r--include/configs/ls2085a_emu.h4
-rw-r--r--include/configs/ls2085a_simu.h3
-rw-r--r--include/configs/lsxl.h42
-rw-r--r--include/configs/mimc200.h1
-rw-r--r--include/configs/mx31ads.h2
-rw-r--r--include/configs/mx6_common.h2
-rw-r--r--include/configs/mx6sabre_common.h3
-rw-r--r--include/configs/mx6sxsabresd.h3
-rw-r--r--include/configs/novena.h1
-rw-r--r--include/configs/odroid.h2
-rw-r--r--include/configs/omap3_igep00x0.h9
-rw-r--r--include/configs/peach-pi.h2
-rw-r--r--include/configs/peach-pit.h2
-rw-r--r--include/configs/rpi-common.h186
-rw-r--r--include/configs/rpi.h187
-rw-r--r--include/configs/rpi_2.h15
-rw-r--r--include/configs/s5p_goni.h5
-rw-r--r--include/configs/sama5d3_xplained.h2
-rw-r--r--include/configs/sama5d3xek.h2
-rw-r--r--include/configs/sandbox.h17
-rw-r--r--include/configs/silk.h117
-rw-r--r--include/configs/smdkc100.h7
-rw-r--r--include/configs/snapper9260.h5
-rw-r--r--include/configs/snow.h2
-rw-r--r--include/configs/socfpga_common.h7
-rw-r--r--include/configs/stv0991.h11
-rw-r--r--include/configs/sun4i.h4
-rw-r--r--include/configs/sun5i.h4
-rw-r--r--include/configs/sun7i.h4
-rw-r--r--include/configs/sunxi-common.h67
-rw-r--r--include/configs/tegra-common.h11
-rw-r--r--include/configs/ti_am335x_common.h7
-rw-r--r--include/configs/ti_omap3_common.h5
-rw-r--r--include/configs/tnetv107x_evm.h139
-rw-r--r--include/configs/uniphier.h4
-rw-r--r--include/configs/x86-common.h6
-rw-r--r--include/configs/zmx25.h2
-rw-r--r--include/debug_uart.h139
-rw-r--r--include/dm/device-internal.h4
-rw-r--r--include/dm/device.h10
-rw-r--r--include/dm/platform_data/serial_sh.h37
-rw-r--r--include/dwmmc.h2
-rw-r--r--include/fdt_support.h2
-rw-r--r--include/fsl-mc/fsl_dpmng.h121
-rw-r--r--include/fsl-mc/fsl_mc.h (renamed from include/fsl_mc.h)0
-rw-r--r--include/fsl-mc/fsl_mc_cmd.h132
-rw-r--r--include/fsl-mc/fsl_mc_sys.h26
-rw-r--r--include/fsl_ddr.h17
-rw-r--r--include/fsl_ddr_dimm_params.h2
-rw-r--r--include/fsl_esdhc.h1
-rw-r--r--include/fsl_sec.h26
-rw-r--r--include/hw_sha.h41
-rw-r--r--include/i2c.h13
-rw-r--r--include/mmc.h56
-rw-r--r--include/net.h4
-rw-r--r--include/netdev.h1
-rw-r--r--include/serial.h3
-rw-r--r--lib/Kconfig36
-rw-r--r--net/net.c25
-rw-r--r--net/ping.c10
-rw-r--r--scripts/Makefile.autoconf55
-rw-r--r--scripts/Makefile.build3
-rw-r--r--scripts/Makefile.spl12
-rw-r--r--scripts/Makefile.uncmd_spl18
-rwxr-xr-xscripts/multiconfig.sh261
-rw-r--r--test/Kconfig1
-rw-r--r--test/dm/Kconfig8
-rw-r--r--test/dm/i2c.c6
-rw-r--r--tools/Makefile2
-rw-r--r--tools/buildman/toolchain.py9
-rw-r--r--tools/env/fw_env.config3
-rw-r--r--tools/imagetool.c35
-rw-r--r--tools/imagetool.h56
-rw-r--r--tools/imagetool.lds24
-rw-r--r--tools/mksunxiboot.c14
-rw-r--r--tools/patman/gitutil.py2
-rw-r--r--tools/patman/settings.py27
877 files changed, 9833 insertions, 10781 deletions
diff --git a/.travis.yml b/.travis.yml
index 90f0fd7..923c9dd 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -107,9 +107,6 @@ matrix:
- TEST_CMD="tools/buildman/buildman mpc512x"
INSTALL_TOOLCHAIN="ppc"
- env:
- - TEST_CMD="tools/buildman/buildman mpc824x"
- INSTALL_TOOLCHAIN="ppc"
- - env:
- TEST_CMD="tools/buildman/buildman mpc8260"
INSTALL_TOOLCHAIN="ppc"
- env:
diff --git a/Kconfig b/Kconfig
index 9af31e3..91a0618 100644
--- a/Kconfig
+++ b/Kconfig
@@ -8,15 +8,13 @@ config UBOOTVERSION
string
option env="UBOOTVERSION"
-config KCONFIG_OBJDIR
- string
- option env="KCONFIG_OBJDIR"
+# Allow defaults in arch-specific code to override any given here
+source "arch/Kconfig"
menu "General setup"
config LOCALVERSION
string "Local version - append to U-Boot release"
- depends on !SPL_BUILD
help
Append an extra string to the end of your U-Boot version.
This will show up on your boot log, for example.
@@ -27,7 +25,6 @@ config LOCALVERSION
config LOCALVERSION_AUTO
bool "Automatically append version information to the version string"
- depends on !SPL_BUILD
default y
help
This will try to automatically determine if the current tree is a
@@ -48,7 +45,6 @@ config LOCALVERSION_AUTO
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
- depends on !SPL_BUILD
default y
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
@@ -56,6 +52,25 @@ config CC_OPTIMIZE_FOR_SIZE
This option is enabled by default for U-Boot.
+config SYS_MALLOC_F
+ bool "Enable malloc() pool before relocation"
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool before relocation"
+ depends on SYS_MALLOC_F
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
help
@@ -68,16 +83,6 @@ endmenu # General setup
menu "Boot images"
-config SPL_BUILD
- bool
- depends on $KCONFIG_OBJDIR="spl" || $KCONFIG_OBJDIR="tpl"
- default y
-
-config TPL_BUILD
- bool
- depends on $KCONFIG_OBJDIR="tpl"
- default y
-
config SUPPORT_SPL
bool
@@ -87,23 +92,19 @@ config SUPPORT_TPL
config SPL
bool
depends on SUPPORT_SPL
- prompt "Enable SPL" if !SPL_BUILD
- default y if SPL_BUILD
+ prompt "Enable SPL"
help
If you want to build SPL as well as the normal image, say Y.
config TPL
bool
depends on SPL && SUPPORT_TPL
- prompt "Enable TPL" if !SPL_BUILD
- default y if TPL_BUILD
- default n
+ prompt "Enable TPL"
help
If you want to build TPL as well as the normal image and SPL, say Y.
config FIT
bool "Support Flattened Image Tree"
- depends on !SPL_BUILD
help
This option allows to boot the new uImage structrure,
Flattened Image Tree. FIT is formally a FDT, which can include
@@ -118,15 +119,17 @@ config FIT_VERBOSE
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on FIT
+ depends on DM
select RSA
help
This option enables signature verification of FIT uImages,
- using a hash signed and verified using RSA.
+ using a hash signed and verified using RSA. If
+ CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
+ hashing is available using hardware, RSA library will use it.
See doc/uImage.FIT/signature.txt for more details.
config SYS_EXTRA_OPTIONS
string "Extra Options (DEPRECATED)"
- depends on !SPL_BUILD
help
The old configuration infrastructure (= mkconfig + boards.cfg)
provided the extra options field. If you have something like
@@ -152,8 +155,6 @@ config SYS_CLK_FREQ
endmenu # Boot images
-source "arch/Kconfig"
-
source "common/Kconfig"
source "dts/Kconfig"
@@ -165,3 +166,5 @@ source "drivers/Kconfig"
source "fs/Kconfig"
source "lib/Kconfig"
+
+source "test/Kconfig"
diff --git a/MAINTAINERS b/MAINTAINERS
index 74a56ec..eef70d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -76,9 +76,7 @@ ARM ATMEL AT91
M: Andreas Bießmann <andreas.devel@googlemail.com>
S: Maintained
T: git git://git.denx.de/u-boot-atmel.git
-F: arch/arm/cpu/armv7/at91/
-F: arch/arm/cpu/at91-common/
-F: arch/arm/include/asm/arch-at91/
+F: arch/arm/mach-at91/
ARM FREESCALE IMX
M: Stefano Babic <sbabic@denx.de>
@@ -100,8 +98,7 @@ M: Prafulla Wadaskar <prafulla@marvell.com>
M: Luka Perkov <luka.perkov@sartura.hr>
S: Maintained
T: git git://git.denx.de/u-boot-marvell.git
-F: arch/arm/cpu/arm926ejs/kirkwood/
-F: arch/arm/include/asm/arch-kirkwood/
+F: arch/arm/mach-kirkwood/
ARM MARVELL PXA
M: Marek Vasut <marex@denx.de>
@@ -147,9 +144,7 @@ ARM TEGRA
M: Tom Warren <twarren@nvidia.com>
S: Maintained
T: git git://git.denx.de/u-boot-tegra.git
-F: arch/arm/cpu/arm720t/tegra*/
-F: arch/arm/cpu/armv7/tegra*/
-F: arch/arm/cpu/tegra*/
+F: arch/arm/mach-tegra/
F: arch/arm/include/asm/arch-tegra*/
ARM TI
diff --git a/Makefile b/Makefile
index 6da4215..bd4abab 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2015
PATCHLEVEL = 04
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME =
# *DOCUMENTATION*
@@ -281,6 +281,11 @@ os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# since Lion (10.7) ASLR is on by default, but we use linker generated lists
+# in some host tools which is a problem then ... so disable ASLR for these
+# tools
+HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
endif
# Decide whether to build built-in, modular, or both.
diff --git a/README b/README
index f38ab15..322697b 100644
--- a/README
+++ b/README
@@ -3152,8 +3152,18 @@ CBFS (Coreboot Filesystem) support
Enable the hash verify command (hash -v). This adds to code
size a little.
- CONFIG_SHA1 - support SHA1 hashing
- CONFIG_SHA256 - support SHA256 hashing
+ CONFIG_SHA1 - This option enables support of hashing using SHA1
+ algorithm. The hash is calculated in software.
+ CONFIG_SHA256 - This option enables support of hashing using
+ SHA256 algorithm. The hash is calculated in software.
+ CONFIG_SHA_HW_ACCEL - This option enables hardware acceleration
+ for SHA1/SHA256 hashing.
+ This affects the 'hash' command and also the
+ hash_lookup_algo() function.
+ CONFIG_SHA_PROG_HW_ACCEL - This option enables
+ hardware-acceleration for SHA1/SHA256 progressive hashing.
+ Data can be streamed in a block at a time and the hashing
+ is performed in hardware.
Note: There is also a sha1sum command, which should perhaps
be deprecated in favour of 'hash sha1'.
@@ -3447,8 +3457,10 @@ FIT uImage format:
CONFIG_FIT_SIGNATURE
This option enables signature verification of FIT uImages,
- using a hash signed and verified using RSA. See
- doc/uImage.FIT/signature.txt for more details.
+ using a hash signed and verified using RSA. If
+ CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
+ hashing is available using hardware, RSA library will use it.
+ See doc/uImage.FIT/signature.txt for more details.
WARNING: When relying on signed FIT images with required
signature check the legacy image format is default
@@ -4919,6 +4931,9 @@ Low Level (hardware related) configuration options:
- CONFIG_FSL_DDR_INTERACTIVE
Enable interactive DDR debugging. See doc/README.fsl-ddr.
+- CONFIG_FSL_DDR_SYNC_REFRESH
+ Enable sync of refresh for multiple controllers.
+
- CONFIG_SYS_83XX_DDR_USES_CS0
Only for 83xx systems. If specified, then DDR should
be configured using CS0 and CS1 instead of CS2 and CS3.
diff --git a/arch/Kconfig b/arch/Kconfig
index 132123b..3d419bc 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -40,6 +40,7 @@ config OPENRISC
config PPC
bool "PowerPC architecture"
select HAVE_PRIVATE_LIBGCC
+ select SUPPORT_OF_CONTROL
config SANDBOX
bool "Sandbox"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a8dc4e2..24f5c02 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -8,30 +8,79 @@ config USE_PRIVATE_LIBGCC
default y
config SYS_CPU
- default "arcv1"
+ default "arcv1" if ISA_ARCOMPACT
+ default "arcv2" if ISA_ARCV2
+
+choice
+ prompt "ARC Instruction Set"
+ default ISA_ARCOMPACT
+
+config ISA_ARCOMPACT
+ bool "ARCompact ISA"
+ help
+ The original ARC ISA of ARC600/700 cores
+
+config ISA_ARCV2
+ bool "ARC ISA v2"
+ help
+ ISA for the Next Generation ARC-HS cores
+
+endchoice
choice
prompt "CPU selection"
- default CPU_ARC770D
+ default CPU_ARC770D if ISA_ARCOMPACT
+ default CPU_ARCHS38 if ISA_ARCV2
config CPU_ARC750D
bool "ARC 750D"
select ARC_MMU_V2
+ depends on ISA_ARCOMPACT
help
Choose this option to build an U-Boot for ARC750D CPU.
config CPU_ARC770D
bool "ARC 770D"
select ARC_MMU_V3
+ depends on ISA_ARCOMPACT
help
Choose this option to build an U-Boot for ARC770D CPU.
+config CPU_ARCEM6
+ bool "ARC EM6"
+ select ARC_MMU_ABSENT
+ depends on ISA_ARCV2
+ help
+ Next Generation ARC Core based on ISA-v2 ISA without MMU.
+
+config CPU_ARCHS36
+ bool "ARC HS36"
+ select ARC_MMU_ABSENT
+ depends on ISA_ARCV2
+ help
+ Next Generation ARC Core based on ISA-v2 ISA without MMU.
+
+config CPU_ARCHS38
+ bool "ARC HS38"
+ select ARC_MMU_V4
+ depends on ISA_ARCV2
+ help
+ Next Generation ARC Core based on ISA-v2 ISA with MMU.
+
endchoice
choice
prompt "MMU Version"
default ARC_MMU_V3 if CPU_ARC770D
default ARC_MMU_V2 if CPU_ARC750D
+ default ARC_MMU_ABSENT if CPU_ARCEM6
+ default ARC_MMU_ABSENT if CPU_ARCHS36
+ default ARC_MMU_V4 if CPU_ARCHS38
+
+config ARC_MMU_ABSENT
+ bool "No MMU"
+ help
+ No MMU
config ARC_MMU_V2
bool "MMU v2"
@@ -48,6 +97,12 @@ config ARC_MMU_V3
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
Shared Address Spaces (SASID)
+config ARC_MMU_V4
+ bool "MMU v4"
+ depends on CPU_ARCHS38
+ help
+ Introduced as a part of ARC HS38 release.
+
endchoice
config CPU_BIG_ENDIAN
diff --git a/arch/arc/config.mk b/arch/arc/config.mk
index f1e81b6..4fcd407 100644
--- a/arch/arc/config.mk
+++ b/arch/arc/config.mk
@@ -38,6 +38,18 @@ ifdef CONFIG_CPU_ARC770D
PLATFORM_CPPFLAGS += -marc700 -mlock -mswape
endif
+ifdef CONFIG_CPU_ARCEM6
+PLATFORM_CPPFLAGS += -marcem
+endif
+
+ifdef CONFIG_CPU_ARCHS34
+PLATFORM_CPPFLAGS += -marchs
+endif
+
+ifdef CONFIG_CPU_ARCHS38
+PLATFORM_CPPFLAGS += -marchs
+endif
+
PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2
# Needed for relocation
diff --git a/arch/arc/cpu/arcv2/Makefile b/arch/arc/cpu/arcv2/Makefile
new file mode 100644
index 0000000..cc69e5a
--- /dev/null
+++ b/arch/arc/cpu/arcv2/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += start.o
diff --git a/arch/arc/cpu/arcv2/start.S b/arch/arc/cpu/arcv2/start.S
new file mode 100644
index 0000000..3ce6896
--- /dev/null
+++ b/arch/arc/cpu/arcv2/start.S
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/arcregs.h>
+
+/*
+ * Note on the LD/ST addressing modes with address register write-back
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a reg1, [reg2, x] => Pre Incr
+ * Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab reg1, [reg2, x] => Post Incr
+ * Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+ st.a \reg, [%sp, -4]
+.endm
+
+.macro PUSHAX aux
+ lr %r9, [\aux]
+ PUSH %r9
+.endm
+
+.macro SAVE_R1_TO_R24
+ PUSH %r1
+ PUSH %r2
+ PUSH %r3
+ PUSH %r4
+ PUSH %r5
+ PUSH %r6
+ PUSH %r7
+ PUSH %r8
+ PUSH %r9
+ PUSH %r10
+ PUSH %r11
+ PUSH %r12
+ PUSH %r13
+ PUSH %r14
+ PUSH %r15
+ PUSH %r16
+ PUSH %r17
+ PUSH %r18
+ PUSH %r19
+ PUSH %r20
+ PUSH %r21
+ PUSH %r22
+ PUSH %r23
+ PUSH %r24
+.endm
+
+.macro SAVE_ALL_SYS
+ /* saving %r0 to reg->r0 in advance since weread %ecr into it */
+ st %r0, [%sp, -8]
+ lr %r0, [%ecr] /* all stack addressing is manual so far */
+ st %r0, [%sp]
+ st %sp, [%sp, -4]
+ /* now move %sp to reg->r0 position so we can do "push" automatically */
+ sub %sp, %sp, 8
+
+ SAVE_R1_TO_R24
+ PUSH %r25
+ PUSH %gp
+ PUSH %fp
+ PUSH %blink
+ PUSHAX %eret
+ PUSHAX %erstatus
+ PUSH %lp_count
+ PUSHAX %lp_end
+ PUSHAX %lp_start
+ PUSHAX %erbta
+.endm
+
+.macro SAVE_EXCEPTION_SOURCE
+#ifdef CONFIG_MMU
+ /* If MMU exists exception faulting address is loaded in EFA reg */
+ lr %r0, [%efa]
+#else
+ /* Otherwise in ERET (exception return) reg */
+ lr %r0, [%eret]
+#endif
+.endm
+
+.section .ivt, "a",@progbits
+.align 4
+ /* Critical system events */
+.word _start /* 0 - 0x000 */
+.word memory_error /* 1 - 0x008 */
+.word instruction_error /* 2 - 0x010 */
+
+ /* Exceptions */
+.word EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */
+.word EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */
+.word EV_TLBMissD /* 0x110, Data TLB miss (0x22) */
+.word EV_TLBProtV /* 0x118, Protection Violation (0x23)
+ or Misaligned Access */
+.word EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */
+.word EV_Trap /* 0x128, Trap exception (0x25) */
+.word EV_Extension /* 0x130, Extn Intruction Excp (0x26) */
+
+ /* Device interrupts */
+.rept 29
+ j interrupt_handler /* 3:31 - 0x018:0xF8 */
+.endr
+
+.text
+.globl _start
+_start:
+ /* Setup interrupt vector base that matches "__text_start" */
+ sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
+
+ /* Setup stack pointer */
+ mov %sp, CONFIG_SYS_INIT_SP_ADDR
+ mov %fp, %sp
+
+ /* Clear bss */
+ mov %r0, __bss_start
+ mov %r1, __bss_end
+
+clear_bss:
+ st.ab 0, [%r0, 4]
+ brlt %r0, %r1, clear_bss
+
+ /* Zero the one and only argument of "board_init_f" */
+ mov_s %r0, 0
+ j board_init_f
+
+memory_error:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_memory_error
+
+instruction_error:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_instruction_error
+
+interrupt_handler:
+ /* Todo - save and restore CPU context when interrupts will be in use */
+ bl do_interrupt_handler
+ rtie
+
+EV_MachineCheck:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_machine_check_fault
+
+EV_TLBMissI:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_itlb_miss
+
+EV_TLBMissD:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_dtlb_miss
+
+EV_TLBProtV:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_tlb_prot_violation
+
+EV_PrivilegeV:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_privilege_violation
+
+EV_Trap:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_trap
+
+EV_Extension:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_extension
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r0 = start_addr_sp
+ * r1 = new__gd
+ * r2 = relocaddr
+ */
+.align 4
+.globl relocate_code
+relocate_code:
+ /*
+ * r0-r12 might be clobbered by C functions
+ * so we use r13-r16 for storage here
+ */
+ mov %r13, %r0 /* save addr_sp */
+ mov %r14, %r1 /* save addr of gd */
+ mov %r15, %r2 /* save addr of destination */
+
+ mov %r16, %r2 /* %r9 - relocation offset */
+ sub %r16, %r16, __image_copy_start
+
+/* Set up the stack */
+stack_setup:
+ mov %sp, %r13
+ mov %fp, %sp
+
+/* Check if monitor is loaded right in place for relocation */
+ mov %r0, __image_copy_start
+ cmp %r0, %r15 /* skip relocation if code loaded */
+ bz do_board_init_r /* in target location already */
+
+/* Copy data (__image_copy_start - __image_copy_end) to new location */
+ mov %r1, %r15
+ mov %r2, __image_copy_end
+ sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
+ asr %r2, %r2, 2 /* r3 <- amount of words to copy */
+ mov %lp_count, %r2
+ lp copy_end
+ ld.ab %r2,[%r0,4]
+ st.ab %r2,[%r1,4]
+copy_end:
+
+/* Fix relocations related issues */
+ bl do_elf_reloc_fixups
+#ifndef CONFIG_SYS_ICACHE_OFF
+ bl invalidate_icache_all
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+ bl flush_dcache_all
+#endif
+
+/* Update position of intterupt vector table */
+ lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
+ add %r0, %r0, %r16 /* Update address */
+ sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
+
+do_board_init_r:
+/* Prepare for exection of "board_init_r" in relocated monitor */
+ mov %r2, board_init_r /* old address of "board_init_r()" */
+ add %r2, %r2, %r16 /* new address of "board_init_r()" */
+ mov %r0, %r14 /* 1-st parameter: gd_t */
+ mov %r1, %r15 /* 2-nd parameter: dest_addr */
+ j [%r2]
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 2725961..8a77cd9 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -17,10 +17,14 @@
#define ARCH_DMA_MINALIGN 128
#endif
-#if defined(CONFIG_ARC_MMU_V2)
+#if defined(ARC_MMU_ABSENT)
+#define CONFIG_ARC_MMU_VER 0
+#elif defined(CONFIG_ARC_MMU_V2)
#define CONFIG_ARC_MMU_VER 2
#elif defined(CONFIG_ARC_MMU_V3)
#define CONFIG_ARC_MMU_VER 3
+#elif defined(CONFIG_ARC_MMU_V4)
+#define CONFIG_ARC_MMU_VER 4
#endif
#endif /* __ASM_ARC_CACHE_H */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a3eb876..eb92297 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -73,21 +73,8 @@ config TARGET_INTEGRATORCP_CM920T
bool "Support integratorcp_cm920t"
select CPU_ARM920T
-config TARGET_A320EVB
- bool "Support a320evb"
- select CPU_ARM920T
-
-config TARGET_AT91RM9200EK
- bool "Support at91rm9200ek"
- select CPU_ARM920T
-
-config TARGET_EB_CPUX9K2
- bool "Support eb_cpux9k2"
- select CPU_ARM920T
-
-config TARGET_CPUAT91
- bool "Support cpuat91"
- select CPU_ARM920T
+config ARCH_AT91
+ bool "Atmel AT91"
config TARGET_EDB93XX
bool "Support edb93xx"
@@ -97,14 +84,6 @@ config TARGET_SCB9328
bool "Support scb9328"
select CPU_ARM920T
-config TARGET_CM4008
- bool "Support cm4008"
- select CPU_ARM920T
-
-config TARGET_CM41XX
- bool "Support cm41xx"
- select CPU_ARM920T
-
config TARGET_VCMA9
bool "Support VCMA9"
select CPU_ARM920T
@@ -129,100 +108,6 @@ config TARGET_GPLUGD
bool "Support gplugd"
select CPU_ARM926EJS
-config TARGET_AFEB9260
- bool "Support afeb9260"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9260EK
- bool "Support at91sam9260ek"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9261EK
- bool "Support at91sam9261ek"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9263EK
- bool "Support at91sam9263ek"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9M10G45EK
- bool "Support at91sam9m10g45ek"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9N12EK
- bool "Support at91sam9n12ek"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9RLEK
- bool "Support at91sam9rlek"
- select CPU_ARM926EJS
-
-config TARGET_AT91SAM9X5EK
- bool "Support at91sam9x5ek"
- select CPU_ARM926EJS
-
-config TARGET_SNAPPER9260
- bool "Support snapper9260"
- select CPU_ARM926EJS
-
-config TARGET_VL_MA2SC
- bool "Support vl_ma2sc"
- select CPU_ARM926EJS
-
-config TARGET_SBC35_A9G20
- bool "Support sbc35_a9g20"
- select CPU_ARM926EJS
-
-config TARGET_TNY_A9260
- bool "Support tny_a9260"
- select CPU_ARM926EJS
-
-config TARGET_USB_A9263
- bool "Support usb_a9263"
- select CPU_ARM926EJS
-
-config TARGET_ETHERNUT5
- bool "Support ethernut5"
- select CPU_ARM926EJS
-
-config TARGET_MEESC
- bool "Support meesc"
- select CPU_ARM926EJS
-
-config TARGET_OTC570
- bool "Support otc570"
- select CPU_ARM926EJS
-
-config TARGET_CPU9260
- bool "Support cpu9260"
- select CPU_ARM926EJS
-
-config TARGET_PM9261
- bool "Support pm9261"
- select CPU_ARM926EJS
-
-config TARGET_PM9263
- bool "Support pm9263"
- select CPU_ARM926EJS
-
-config TARGET_PM9G45
- bool "Support pm9g45"
- select CPU_ARM926EJS
-
-config TARGET_CORVUS
- select SUPPORT_SPL
- bool "Support corvus"
- select CPU_ARM926EJS
-
-config TARGET_TAURUS
- select SUPPORT_SPL
- bool "Support taurus"
- select CPU_ARM926EJS
-
-config TARGET_STAMP9G20
- bool "Support stamp9g20"
- select CPU_ARM926EJS
-
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
@@ -247,10 +132,6 @@ config TARGET_DEVKIT3250
bool "Support devkit3250"
select CPU_ARM926EJS
-config TARGET_JADECPU
- bool "Support jadecpu"
- select CPU_ARM926EJS
-
config TARGET_MX25PDK
bool "Support mx25pdk"
select CPU_ARM926EJS
@@ -330,10 +211,6 @@ config ORION5X
bool "Marvell Orion"
select CPU_ARM926EJS
-config TARGET_DKB
- bool "Support dkb"
- select CPU_ARM926EJS
-
config TARGET_SPEAR300
bool "Support spear300"
select CPU_ARM926EJS
@@ -413,9 +290,9 @@ config TARGET_RPI
bool "Support rpi"
select CPU_ARM1176
-config TARGET_TNETV107X_EVM
- bool "Support tnetv107x_evm"
- select CPU_ARM1176
+config TARGET_RPI_2
+ bool "Support rpi_2"
+ select CPU_V7
config TARGET_INTEGRATORAP_CM946ES
bool "Support integratorap_cm946es"
@@ -514,26 +391,6 @@ config TARGET_TI816X_EVM
select CPU_V7
select SUPPORT_SPL
-config TARGET_SAMA5D3_XPLAINED
- bool "Support sama5d3_xplained"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SAMA5D3XEK
- bool "Support sama5d3xek"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SAMA5D4_XPLAINED
- bool "Support sama5d4_xplained"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_SAMA5D4EK
- bool "Support sama5d4ek"
- select CPU_V7
- select SUPPORT_SPL
-
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
select CPU_V7
@@ -743,9 +600,8 @@ config TEGRA
bool "NVIDIA Tegra"
select SUPPORT_SPL
select SPL
- select OF_CONTROL if !SPL_BUILD
- select CPU_ARM720T if SPL_BUILD
- select CPU_V7 if !SPL_BUILD
+ select OF_CONTROL
+ select CPU_V7
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
@@ -837,21 +693,25 @@ config ARCH_UNIPHIER
select CPU_V7
select SUPPORT_SPL
select SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
endchoice
-source "arch/arm/cpu/arm926ejs/davinci/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/cpu/arm1176/bcm2835/Kconfig"
source "arch/arm/cpu/armv7/exynos/Kconfig"
-source "arch/arm/cpu/armv7/highbank/Kconfig"
+source "arch/arm/mach-highbank/Kconfig"
-source "arch/arm/cpu/armv7/keystone/Kconfig"
+source "arch/arm/mach-keystone/Kconfig"
-source "arch/arm/cpu/arm926ejs/kirkwood/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
-source "arch/arm/cpu/arm926ejs/nomadik/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/cpu/armv7/omap3/Kconfig"
@@ -859,17 +719,17 @@ source "arch/arm/cpu/armv7/omap4/Kconfig"
source "arch/arm/cpu/armv7/omap5/Kconfig"
-source "arch/arm/cpu/arm926ejs/orion5x/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/cpu/armv7/rmobile/Kconfig"
source "arch/arm/cpu/armv7/s5pc1xx/Kconfig"
-source "arch/arm/cpu/armv7/tegra-common/Kconfig"
+source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/cpu/armv7/uniphier/Kconfig"
-source "arch/arm/cpu/arm926ejs/versatile/Kconfig"
+source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/cpu/armv7/zynq/Kconfig"
@@ -878,47 +738,25 @@ source "arch/arm/cpu/armv7/Kconfig"
source "board/aristainetos/Kconfig"
source "board/BuR/kwb/Kconfig"
source "board/BuR/tseries/Kconfig"
-source "board/BuS/eb_cpux9k2/Kconfig"
-source "board/BuS/vl_ma2sc/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/db-mv784mp-gp/Kconfig"
-source "board/Marvell/dkb/Kconfig"
source "board/Marvell/gplugd/Kconfig"
-source "board/afeb9260/Kconfig"
source "board/altera/socfpga/Kconfig"
source "board/armadeus/apf27/Kconfig"
source "board/armltd/integrator/Kconfig"
source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
-source "board/atmel/at91rm9200ek/Kconfig"
-source "board/atmel/at91sam9260ek/Kconfig"
-source "board/atmel/at91sam9261ek/Kconfig"
-source "board/atmel/at91sam9263ek/Kconfig"
-source "board/atmel/at91sam9m10g45ek/Kconfig"
-source "board/atmel/at91sam9n12ek/Kconfig"
-source "board/atmel/at91sam9rlek/Kconfig"
-source "board/atmel/at91sam9x5ek/Kconfig"
-source "board/atmel/sama5d3_xplained/Kconfig"
-source "board/atmel/sama5d3xek/Kconfig"
-source "board/atmel/sama5d4_xplained/Kconfig"
-source "board/atmel/sama5d4ek/Kconfig"
source "board/bachmann/ot1200/Kconfig"
source "board/balloon3/Kconfig"
source "board/barco/platinum/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/bluegiga/apx4devkit/Kconfig"
-source "board/bluewater/snapper9260/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
source "board/broadcom/bcmcygnus/Kconfig"
source "board/broadcom/bcmnsp/Kconfig"
-source "board/calao/sbc35_a9g20/Kconfig"
-source "board/calao/tny_a9260/Kconfig"
-source "board/calao/usb_a9263/Kconfig"
source "board/cirrus/edb93xx/Kconfig"
-source "board/cm4008/Kconfig"
-source "board/cm41xx/Kconfig"
source "board/compulab/cm_t335/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"
@@ -926,14 +764,8 @@ source "board/creative/xfi3/Kconfig"
source "board/davedenx/qong/Kconfig"
source "board/denx/m28evk/Kconfig"
source "board/denx/m53evk/Kconfig"
-source "board/egnite/ethernut5/Kconfig"
source "board/embest/mx6boards/Kconfig"
-source "board/esd/meesc/Kconfig"
-source "board/esd/otc570/Kconfig"
source "board/esg/ima3-mx53/Kconfig"
-source "board/eukrea/cpu9260/Kconfig"
-source "board/eukrea/cpuat91/Kconfig"
-source "board/faraday/a320evb/Kconfig"
source "board/freescale/ls2085a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
@@ -977,18 +809,14 @@ source "board/phytec/pcm051/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/pxa255_idp/Kconfig"
source "board/raspberrypi/rpi/Kconfig"
-source "board/ronetix/pm9261/Kconfig"
-source "board/ronetix/pm9263/Kconfig"
-source "board/ronetix/pm9g45/Kconfig"
+source "board/raspberrypi/rpi_2/Kconfig"
source "board/samsung/smdk2410/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/scb9328/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
-source "board/siemens/corvus/Kconfig"
source "board/siemens/draco/Kconfig"
source "board/siemens/pxm2/Kconfig"
source "board/siemens/rut/Kconfig"
-source "board/siemens/taurus/Kconfig"
source "board/silica/pengwyn/Kconfig"
source "board/solidrun/hummingboard/Kconfig"
source "board/spear/spear300/Kconfig"
@@ -1000,15 +828,12 @@ source "board/st-ericsson/snowball/Kconfig"
source "board/st-ericsson/u8500/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/sunxi/Kconfig"
-source "board/syteco/jadecpu/Kconfig"
source "board/syteco/zmx25/Kconfig"
-source "board/taskit/stamp9g20/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/ti/am335x/Kconfig"
source "board/ti/am43xx/Kconfig"
source "board/ti/ti814x/Kconfig"
source "board/ti/ti816x/Kconfig"
-source "board/ti/tnetv107xevm/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/tqc/tqma6/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ebb7dc3..878ae26 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -2,6 +2,27 @@
# SPDX-License-Identifier: GPL-2.0+
#
+# Machine directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AT91) += at91
+machine-$(CONFIG_ARCH_DAVINCI) += davinci
+machine-$(CONFIG_ARCH_HIGHBANK) += highbank
+machine-$(CONFIG_ARCH_KEYSTONE) += keystone
+# TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
+machine-$(CONFIG_KIRKWOOD) += kirkwood
+# TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
+machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
+machine-$(CONFIG_ORION5X) += orion5x
+machine-$(CONFIG_TEGRA) += tegra
+machine-$(CONFIG_ARCH_VERSATILE) += versatile
+
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+
+PLATFORM_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
+libs-y += $(machdirs)
+
head-y := arch/arm/cpu/$(CPU)/start.o
ifeq ($(CONFIG_SPL_BUILD),y)
@@ -27,3 +48,6 @@ endif
ifneq (,$(filter $(SOC), armada-xp kirkwood))
libs-y += arch/arm/mvebu-common/
endif
+
+# deprecated
+-include $(machdirs)/config.mk
diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
index 35d8d38..6bea3d3 100644
--- a/arch/arm/cpu/Makefile
+++ b/arch/arm/cpu/Makefile
@@ -1,6 +1 @@
-obj-$(CONFIG_AT91FAMILY) += at91-common/
-obj-$(CONFIG_TEGRA20) += tegra20-common/
-obj-$(CONFIG_TEGRA30) += tegra30-common/
-obj-$(CONFIG_TEGRA114) += tegra114-common/
-obj-$(CONFIG_TEGRA124) += tegra124-common/
-obj-$(CONFIG_TEGRA) += tegra-common/
+obj- += dummy.o
diff --git a/arch/arm/cpu/arm1176/Makefile b/arch/arm/cpu/arm1176/Makefile
index ead2303..480e130 100644
--- a/arch/arm/cpu/arm1176/Makefile
+++ b/arch/arm/cpu/arm1176/Makefile
@@ -12,4 +12,3 @@ extra-y = start.o
obj-y = cpu.o
obj-$(CONFIG_BCM2835) += bcm2835/
-obj-$(CONFIG_TNETV107X) += tnetv107x/
diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig
new file mode 100644
index 0000000..73cc72b
--- /dev/null
+++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_RPI || TARGET_RPI_2
+
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_GPIO
+ default y
+
+endif
diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/cpu/arm1176/bcm2835/Makefile
index 0ad3690..7e5dbe1 100644
--- a/arch/arm/cpu/arm1176/bcm2835/Makefile
+++ b/arch/arm/cpu/arm1176/bcm2835/Makefile
@@ -1,15 +1,7 @@
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# (C) Copyright 2012 Stephen Warren
#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# SPDX-License-Identifier: GPL-2.0
#
obj-y := lowlevel_init.o
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 0704bdd..ac937bf 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -96,28 +96,6 @@ mmu_disable:
mov pc, r2
mmu_disable_phys:
-#ifdef CONFIG_DISABLE_TCM
- /*
- * Disable the TCMs
- */
- mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */
- cmp r0, #0
- beq skip_tcmdisable
- mov r1, #0
- mov r2, #1
- tst r0, r2
- mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/
- tst r0, r2, LSL #16
- mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/
-skip_tcmdisable:
-#endif
-#endif
-
-#ifdef CONFIG_PERIPORT_REMAP
- /* Peri port setup */
- ldr r0, =CONFIG_PERIPORT_BASE
- orr r0, r0, #CONFIG_PERIPORT_SIZE
- mcr p15,0,r0,c15,c2,4
#endif
/*
diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile
deleted file mode 100644
index a4c1edf..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += aemif.o clock.o init.o mux.o timer.o
-obj-y += lowlevel_init.o
diff --git a/arch/arm/cpu/arm1176/tnetv107x/aemif.c b/arch/arm/cpu/arm1176/tnetv107x/aemif.c
deleted file mode 100644
index a0f5728..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/aemif.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * TNETV107X: Asynchronous EMIF Configuration
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mux.h>
-
-#define ASYNC_EMIF_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE
-#define ASYNC_EMIF_CONFIG(cs) (ASYNC_EMIF_BASE+0x10+(cs)*4)
-#define ASYNC_EMIF_ONENAND_CONTROL (ASYNC_EMIF_BASE+0x5c)
-#define ASYNC_EMIF_NAND_CONTROL (ASYNC_EMIF_BASE+0x60)
-#define ASYNC_EMIF_WAITCYCLE_CONFIG (ASYNC_EMIF_BASE+0x4)
-
-#define CONFIG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0)
-#define CONFIG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0)
-#define CONFIG_WR_SETUP(v) (((v) & 0x0f) << 26)
-#define CONFIG_WR_STROBE(v) (((v) & 0x3f) << 20)
-#define CONFIG_WR_HOLD(v) (((v) & 0x07) << 17)
-#define CONFIG_RD_SETUP(v) (((v) & 0x0f) << 13)
-#define CONFIG_RD_STROBE(v) (((v) & 0x3f) << 7)
-#define CONFIG_RD_HOLD(v) (((v) & 0x07) << 4)
-#define CONFIG_TURN_AROUND(v) (((v) & 0x03) << 2)
-#define CONFIG_WIDTH(v) (((v) & 0x03) << 0)
-
-#define NUM_CS 4
-
-#define set_config_field(reg, field, val) \
- do { \
- if (val != -1) { \
- reg &= ~CONFIG_##field(0xffffffff); \
- reg |= CONFIG_##field(val); \
- } \
- } while (0)
-
-void configure_async_emif(int cs, struct async_emif_config *cfg)
-{
- unsigned long tmp;
-
- if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
- tmp = __raw_readl(ASYNC_EMIF_NAND_CONTROL);
- tmp |= (1 << cs);
- __raw_writel(tmp, ASYNC_EMIF_NAND_CONTROL);
-
- } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
- tmp = __raw_readl(ASYNC_EMIF_ONENAND_CONTROL);
- tmp |= (1 << cs);
- __raw_writel(tmp, ASYNC_EMIF_ONENAND_CONTROL);
- }
-
- tmp = __raw_readl(ASYNC_EMIF_CONFIG(cs));
-
- set_config_field(tmp, SELECT_STROBE, cfg->select_strobe);
- set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait);
- set_config_field(tmp, WR_SETUP, cfg->wr_setup);
- set_config_field(tmp, WR_STROBE, cfg->wr_strobe);
- set_config_field(tmp, WR_HOLD, cfg->wr_hold);
- set_config_field(tmp, RD_SETUP, cfg->rd_setup);
- set_config_field(tmp, RD_STROBE, cfg->rd_strobe);
- set_config_field(tmp, RD_HOLD, cfg->rd_hold);
- set_config_field(tmp, TURN_AROUND, cfg->turn_around);
- set_config_field(tmp, WIDTH, cfg->width);
-
- __raw_writel(tmp, ASYNC_EMIF_CONFIG(cs));
-}
-
-void init_async_emif(int num_cs, struct async_emif_config *config)
-{
- int cs;
-
- clk_enable(TNETV107X_LPSC_AEMIF);
-
- for (cs = 0; cs < num_cs; cs++)
- configure_async_emif(cs, config + cs);
-}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c
deleted file mode 100644
index 7ba28d3..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/clock.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * TNETV107X: Clock management APIs
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm-generic/errno.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/arch/clock.h>
-
-#define CLOCK_BASE TNETV107X_CLOCK_CONTROL_BASE
-#define PSC_BASE TNETV107X_PSC_BASE
-
-#define BIT(x) (1 << (x))
-
-#define MAX_PREDIV 64
-#define MAX_POSTDIV 8UL
-#define MAX_MULT 512
-#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV)
-
-/* LPSC registers */
-#define PSC_PTCMD 0x120
-#define PSC_PTSTAT 0x128
-#define PSC_MDSTAT(n) (0x800 + (n) * 4)
-#define PSC_MDCTL(n) (0xA00 + (n) * 4)
-
-#define PSC_MDCTL_LRSTZ BIT(8)
-
-#define psc_reg_read(reg) __raw_readl((u32 *)(PSC_BASE + (reg)))
-#define psc_reg_write(reg, val) __raw_writel(val, (u32 *)(PSC_BASE + (reg)))
-
-/* SSPLL registers */
-struct sspll_regs {
- u32 modes;
- u32 postdiv;
- u32 prediv;
- u32 mult_factor;
- u32 divider_range;
- u32 bw_divider;
- u32 spr_amount;
- u32 spr_rate_div;
- u32 diag;
-};
-
-/* SSPLL base addresses */
-static struct sspll_regs *sspll_regs[] = {
- (struct sspll_regs *)(CLOCK_BASE + 0x040),
- (struct sspll_regs *)(CLOCK_BASE + 0x080),
- (struct sspll_regs *)(CLOCK_BASE + 0x0c0),
-};
-
-#define sspll_reg(pll, reg) (&(sspll_regs[pll]->reg))
-#define sspll_reg_read(pll, reg) __raw_readl(sspll_reg(pll, reg))
-#define sspll_reg_write(pll, reg, val) __raw_writel(val, sspll_reg(pll, reg))
-
-
-/* PLL Control Registers */
-struct pllctl_regs {
- u32 ctl; /* 00 */
- u32 ocsel; /* 04 */
- u32 secctl; /* 08 */
- u32 __pad0;
- u32 mult; /* 10 */
- u32 prediv; /* 14 */
- u32 div1; /* 18 */
- u32 div2; /* 1c */
- u32 div3; /* 20 */
- u32 oscdiv1; /* 24 */
- u32 postdiv; /* 28 */
- u32 bpdiv; /* 2c */
- u32 wakeup; /* 30 */
- u32 __pad1;
- u32 cmd; /* 38 */
- u32 stat; /* 3c */
- u32 alnctl; /* 40 */
- u32 dchange; /* 44 */
- u32 cken; /* 48 */
- u32 ckstat; /* 4c */
- u32 systat; /* 50 */
- u32 ckctl; /* 54 */
- u32 __pad2[2];
- u32 div4; /* 60 */
- u32 div5; /* 64 */
- u32 div6; /* 68 */
- u32 div7; /* 6c */
- u32 div8; /* 70 */
-};
-
-struct lpsc_map {
- int pll, div;
-};
-
-static struct pllctl_regs *pllctl_regs[] = {
- (struct pllctl_regs *)(CLOCK_BASE + 0x700),
- (struct pllctl_regs *)(CLOCK_BASE + 0x300),
- (struct pllctl_regs *)(CLOCK_BASE + 0x500),
-};
-
-#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg))
-#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg))
-#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg))
-
-#define pllctl_reg_rmw(pll, reg, mask, val) \
- pllctl_reg_write(pll, reg, \
- (pllctl_reg_read(pll, reg) & ~(mask)) | val)
-
-#define pllctl_reg_setbits(pll, reg, mask) \
- pllctl_reg_rmw(pll, reg, 0, mask)
-
-#define pllctl_reg_clrbits(pll, reg, mask) \
- pllctl_reg_rmw(pll, reg, mask, 0)
-
-/* PLLCTL Bits */
-#define PLLCTL_CLKMODE BIT(8)
-#define PLLCTL_PLLSELB BIT(7)
-#define PLLCTL_PLLENSRC BIT(5)
-#define PLLCTL_PLLDIS BIT(4)
-#define PLLCTL_PLLRST BIT(3)
-#define PLLCTL_PLLPWRDN BIT(1)
-#define PLLCTL_PLLEN BIT(0)
-
-#define PLLDIV_ENABLE BIT(15)
-
-static int pll_div_offset[] = {
-#define div_offset(reg) offsetof(struct pllctl_regs, reg)
- div_offset(div1), div_offset(div2), div_offset(div3),
- div_offset(div4), div_offset(div5), div_offset(div6),
- div_offset(div7), div_offset(div8),
-};
-
-static unsigned long pll_bypass_mask[] = { 1, 4, 2 };
-static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff };
-
-/* Mappings from PLL+DIV to subsystem clocks */
-#define sys_arm1176_clk {SYS_PLL, 0}
-#define sys_dsp_clk {SYS_PLL, 1}
-#define sys_ddr_clk {SYS_PLL, 2}
-#define sys_full_clk {SYS_PLL, 3}
-#define sys_lcd_clk {SYS_PLL, 4}
-#define sys_vlynq_ref_clk {SYS_PLL, 5}
-#define sys_tsc_clk {SYS_PLL, 6}
-#define sys_half_clk {SYS_PLL, 7}
-
-#define eth_clk_5 {ETH_PLL, 0}
-#define eth_clk_50 {ETH_PLL, 1}
-#define eth_clk_125 {ETH_PLL, 2}
-#define eth_clk_250 {ETH_PLL, 3}
-#define eth_clk_25 {ETH_PLL, 4}
-
-#define tdm_clk {TDM_PLL, 0}
-#define tdm_extra_clk {TDM_PLL, 1}
-#define tdm1_clk {TDM_PLL, 2}
-
-static const struct lpsc_map lpsc_clk_map[] = {
- [TNETV107X_LPSC_ARM] = sys_arm1176_clk,
- [TNETV107X_LPSC_GEM] = sys_dsp_clk,
- [TNETV107X_LPSC_DDR2_PHY] = sys_ddr_clk,
- [TNETV107X_LPSC_TPCC] = sys_full_clk,
- [TNETV107X_LPSC_TPTC0] = sys_full_clk,
- [TNETV107X_LPSC_TPTC1] = sys_full_clk,
- [TNETV107X_LPSC_RAM] = sys_full_clk,
- [TNETV107X_LPSC_MBX_LITE] = sys_arm1176_clk,
- [TNETV107X_LPSC_LCD] = sys_lcd_clk,
- [TNETV107X_LPSC_ETHSS] = eth_clk_125,
- [TNETV107X_LPSC_AEMIF] = sys_full_clk,
- [TNETV107X_LPSC_CHIP_CFG] = sys_half_clk,
- [TNETV107X_LPSC_TSC] = sys_tsc_clk,
- [TNETV107X_LPSC_ROM] = sys_half_clk,
- [TNETV107X_LPSC_UART2] = sys_half_clk,
- [TNETV107X_LPSC_PKTSEC] = sys_half_clk,
- [TNETV107X_LPSC_SECCTL] = sys_half_clk,
- [TNETV107X_LPSC_KEYMGR] = sys_half_clk,
- [TNETV107X_LPSC_KEYPAD] = sys_half_clk,
- [TNETV107X_LPSC_GPIO] = sys_half_clk,
- [TNETV107X_LPSC_MDIO] = sys_half_clk,
- [TNETV107X_LPSC_SDIO0] = sys_half_clk,
- [TNETV107X_LPSC_UART0] = sys_half_clk,
- [TNETV107X_LPSC_UART1] = sys_half_clk,
- [TNETV107X_LPSC_TIMER0] = sys_half_clk,
- [TNETV107X_LPSC_TIMER1] = sys_half_clk,
- [TNETV107X_LPSC_WDT_ARM] = sys_half_clk,
- [TNETV107X_LPSC_WDT_DSP] = sys_half_clk,
- [TNETV107X_LPSC_SSP] = sys_half_clk,
- [TNETV107X_LPSC_TDM0] = tdm_clk,
- [TNETV107X_LPSC_VLYNQ] = sys_vlynq_ref_clk,
- [TNETV107X_LPSC_MCDMA] = sys_half_clk,
- [TNETV107X_LPSC_USB0] = sys_half_clk,
- [TNETV107X_LPSC_TDM1] = tdm1_clk,
- [TNETV107X_LPSC_DEBUGSS] = sys_half_clk,
- [TNETV107X_LPSC_ETHSS_RGMII] = eth_clk_250,
- [TNETV107X_LPSC_SYSTEM] = sys_half_clk,
- [TNETV107X_LPSC_IMCOP] = sys_dsp_clk,
- [TNETV107X_LPSC_SPARE] = sys_half_clk,
- [TNETV107X_LPSC_SDIO1] = sys_half_clk,
- [TNETV107X_LPSC_USB1] = sys_half_clk,
- [TNETV107X_LPSC_USBSS] = sys_half_clk,
- [TNETV107X_LPSC_DDR2_EMIF1_VRST] = sys_ddr_clk,
- [TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST] = sys_ddr_clk,
-};
-
-static const unsigned long pll_ext_freq[] = {
- [SYS_PLL] = CONFIG_PLL_SYS_EXT_FREQ,
- [ETH_PLL] = CONFIG_PLL_ETH_EXT_FREQ,
- [TDM_PLL] = CONFIG_PLL_TDM_EXT_FREQ,
-};
-
-static unsigned long pll_freq_get(int pll)
-{
- unsigned long mult = 1, prediv = 1, postdiv = 1;
- unsigned long ref = CONFIG_SYS_INT_OSC_FREQ;
- unsigned long ret;
- u32 bypass;
-
- bypass = __raw_readl((u32 *)(CLOCK_BASE));
- if (!(bypass & pll_bypass_mask[pll])) {
- mult = sspll_reg_read(pll, mult_factor);
- prediv = sspll_reg_read(pll, prediv) + 1;
- postdiv = sspll_reg_read(pll, postdiv) + 1;
- }
-
- if (pllctl_reg_read(pll, ctl) & PLLCTL_CLKMODE)
- ref = pll_ext_freq[pll];
-
- if (!(pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN))
- return ref;
-
- ret = (unsigned long)(ref + ((unsigned long long)ref * mult) / 256);
- ret /= (prediv * postdiv);
-
- return ret;
-}
-
-static unsigned long __pll_div_freq_get(int pll, unsigned int fpll,
- int div)
-{
- int divider = 1;
- unsigned long divreg;
-
- divreg = __raw_readl((void *)pllctl_regs[pll] + pll_div_offset[div]);
-
- if (divreg & PLLDIV_ENABLE)
- divider = (divreg & pll_div_mask[pll]) + 1;
-
- return fpll / divider;
-}
-
-static unsigned long pll_div_freq_get(int pll, int div)
-{
- unsigned int fpll = pll_freq_get(pll);
-
- return __pll_div_freq_get(pll, fpll, div);
-}
-
-static void __pll_div_freq_set(int pll, unsigned int fpll, int div,
- unsigned long hz)
-{
- int divider = (fpll / hz - 1);
-
- divider &= pll_div_mask[pll];
- divider |= PLLDIV_ENABLE;
-
- __raw_writel(divider, (void *)pllctl_regs[pll] + pll_div_offset[div]);
- pllctl_reg_setbits(pll, alnctl, (1 << div));
- pllctl_reg_setbits(pll, dchange, (1 << div));
-}
-
-static unsigned long pll_div_freq_set(int pll, int div, unsigned long hz)
-{
- unsigned int fpll = pll_freq_get(pll);
-
- __pll_div_freq_set(pll, fpll, div, hz);
-
- pllctl_reg_write(pll, cmd, 1);
-
- /* Wait until new divider takes effect */
- while (pllctl_reg_read(pll, stat) & 0x01);
-
- return __pll_div_freq_get(pll, fpll, div);
-}
-
-unsigned long clk_get_rate(unsigned int clk)
-{
- return pll_div_freq_get(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div);
-}
-
-unsigned long clk_round_rate(unsigned int clk, unsigned long hz)
-{
- unsigned long fpll, divider, pll;
-
- pll = lpsc_clk_map[clk].pll;
- fpll = pll_freq_get(pll);
- divider = (fpll / hz - 1);
- divider &= pll_div_mask[pll];
-
- return fpll / (divider + 1);
-}
-
-int clk_set_rate(unsigned int clk, unsigned long _hz)
-{
- unsigned long hz;
-
- hz = clk_round_rate(clk, _hz);
- if (hz != _hz)
- return -EINVAL; /* Cannot set to target freq */
-
- pll_div_freq_set(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div, hz);
- return 0;
-}
-
-void lpsc_control(int mod, unsigned long state, int lrstz)
-{
- u32 mdctl;
-
- mdctl = psc_reg_read(PSC_MDCTL(mod));
- mdctl &= ~0x1f;
- mdctl |= state;
-
- if (lrstz == 0)
- mdctl &= ~PSC_MDCTL_LRSTZ;
- else if (lrstz == 1)
- mdctl |= PSC_MDCTL_LRSTZ;
-
- psc_reg_write(PSC_MDCTL(mod), mdctl);
-
- psc_reg_write(PSC_PTCMD, 1);
-
- /* wait for power domain transition to end */
- while (psc_reg_read(PSC_PTSTAT) & 1);
-
- /* Wait for module state change */
- while ((psc_reg_read(PSC_MDSTAT(mod)) & 0x1f) != state);
-}
-
-int lpsc_status(unsigned int id)
-{
- return psc_reg_read(PSC_MDSTAT(id)) & 0x1f;
-}
-
-static void init_pll(const struct pll_init_data *data)
-{
- unsigned long fpll;
- unsigned long best_pre = 0, best_post = 0, best_mult = 0;
- unsigned long div, prediv, postdiv, mult;
- unsigned long delta, actual;
- long best_delta = -1;
- int i;
- u32 tmp;
-
- if (data->pll == SYS_PLL)
- return; /* cannot reconfigure system pll on the fly */
-
- tmp = pllctl_reg_read(data->pll, ctl);
- if (data->internal_osc) {
- tmp &= ~PLLCTL_CLKMODE;
- fpll = CONFIG_SYS_INT_OSC_FREQ;
- } else {
- tmp |= PLLCTL_CLKMODE;
- fpll = pll_ext_freq[data->pll];
- }
- pllctl_reg_write(data->pll, ctl, tmp);
-
- mult = data->pll_freq / fpll;
- for (mult = max(mult, 1UL); mult <= MAX_MULT; mult++) {
- div = (fpll * mult) / data->pll_freq;
- if (div < 1 || div > MAX_DIV)
- continue;
-
- for (postdiv = 1; postdiv <= min(div, MAX_POSTDIV); postdiv++) {
- prediv = div / postdiv;
- if (prediv < 1 || prediv > MAX_PREDIV)
- continue;
-
- actual = (fpll / prediv) * (mult / postdiv);
- delta = (actual - data->pll_freq);
- if (delta < 0)
- delta = -delta;
- if ((delta < best_delta) || (best_delta == -1)) {
- best_delta = delta;
- best_mult = mult;
- best_pre = prediv;
- best_post = postdiv;
- if (delta == 0)
- goto done;
- }
- }
- }
-done:
-
- if (best_delta == -1) {
- printf("pll cannot derive %lu from %lu\n",
- data->pll_freq, fpll);
- return;
- }
-
- fpll = fpll * best_mult;
- fpll /= best_pre * best_post;
-
- pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC);
- pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN);
-
- pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
-
- pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
- pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLDIS);
-
- sspll_reg_write(data->pll, mult_factor, (best_mult - 1) << 8);
- sspll_reg_write(data->pll, prediv, best_pre - 1);
- sspll_reg_write(data->pll, postdiv, best_post - 1);
-
- for (i = 0; i < 10; i++)
- if (data->div_freq[i])
- __pll_div_freq_set(data->pll, fpll, i,
- data->div_freq[i]);
-
- pllctl_reg_write(data->pll, cmd, 1);
-
- /* Wait until pll "go" operation completes */
- while (pllctl_reg_read(data->pll, stat) & 0x01);
-
- pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
- pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
-}
-
-void init_plls(int num_pll, struct pll_init_data *config)
-{
- int i;
-
- for (i = 0; i < num_pll; i++)
- init_pll(&config[i]);
-}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/init.c b/arch/arm/cpu/arm1176/tnetv107x/init.c
deleted file mode 100644
index d870826..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/init.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * TNETV107X: Architecture initialization
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-void chip_configuration_unlock(void)
-{
- __raw_writel(TNETV107X_KICK0_MAGIC, TNETV107X_KICK0);
- __raw_writel(TNETV107X_KICK1_MAGIC, TNETV107X_KICK1);
-}
-
-int arch_cpu_init(void)
-{
- icache_enable();
- chip_configuration_unlock();
-
- return 0;
-}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S
deleted file mode 100644
index a8bce47..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * TNETV107X: Low-level pre-relocation initialization
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-.globl lowlevel_init
-lowlevel_init:
- /* nothing for now, maybe needed for more exotic boot modes */
- mov pc, lr
diff --git a/arch/arm/cpu/arm1176/tnetv107x/mux.c b/arch/arm/cpu/arm1176/tnetv107x/mux.c
deleted file mode 100644
index 310d84d..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/mux.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * TNETV107X: Pinmux configuration
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mux.h>
-
-#define MUX_MODE_1 0x00
-#define MUX_MODE_2 0x04
-#define MUX_MODE_3 0x0c
-#define MUX_MODE_4 0x1c
-
-#define MUX_DEBUG 0
-
-static const struct pin_config pin_table[] = {
- /* reg shift mode */
- TNETV107X_MUX_CFG(0, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(0, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(0, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(0, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(0, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(0, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(0, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(0, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(0, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(0, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(0, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(0, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(1, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(1, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(1, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(1, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(1, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(1, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(1, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(1, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(1, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(1, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(1, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(1, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(2, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(2, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(2, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(2, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(2, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(2, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(2, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(2, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(2, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(2, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(2, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(2, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(3, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 0, MUX_MODE_4),
- TNETV107X_MUX_CFG(3, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(3, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 5, MUX_MODE_4),
- TNETV107X_MUX_CFG(3, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(3, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 10, MUX_MODE_4),
- TNETV107X_MUX_CFG(3, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(3, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 15, MUX_MODE_4),
- TNETV107X_MUX_CFG(3, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(3, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 20, MUX_MODE_4),
- TNETV107X_MUX_CFG(3, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(3, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(3, 25, MUX_MODE_4),
- TNETV107X_MUX_CFG(4, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(4, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(4, 0, MUX_MODE_4),
- TNETV107X_MUX_CFG(4, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(4, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(4, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(4, 15, MUX_MODE_4),
- TNETV107X_MUX_CFG(4, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(4, 20, MUX_MODE_3),
- TNETV107X_MUX_CFG(4, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(4, 25, MUX_MODE_4),
- TNETV107X_MUX_CFG(5, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(5, 0, MUX_MODE_4),
- TNETV107X_MUX_CFG(5, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(5, 5, MUX_MODE_4),
- TNETV107X_MUX_CFG(5, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(5, 10, MUX_MODE_4),
- TNETV107X_MUX_CFG(5, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(5, 15, MUX_MODE_4),
- TNETV107X_MUX_CFG(5, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(5, 20, MUX_MODE_4),
- TNETV107X_MUX_CFG(5, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(5, 25, MUX_MODE_4),
- TNETV107X_MUX_CFG(6, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(6, 0, MUX_MODE_4),
- TNETV107X_MUX_CFG(6, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(6, 5, MUX_MODE_4),
- TNETV107X_MUX_CFG(6, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(6, 10, MUX_MODE_4),
- TNETV107X_MUX_CFG(6, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(6, 15, MUX_MODE_4),
- TNETV107X_MUX_CFG(6, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(6, 20, MUX_MODE_4),
- TNETV107X_MUX_CFG(6, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(6, 25, MUX_MODE_4),
- TNETV107X_MUX_CFG(7, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(7, 0, MUX_MODE_4),
- TNETV107X_MUX_CFG(7, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(7, 5, MUX_MODE_4),
- TNETV107X_MUX_CFG(7, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(7, 10, MUX_MODE_4),
- TNETV107X_MUX_CFG(7, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(7, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(7, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(7, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(7, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(7, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(8, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(8, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(8, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(8, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(8, 5, MUX_MODE_4),
- TNETV107X_MUX_CFG(8, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(8, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(9, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(9, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(9, 0, MUX_MODE_4),
- TNETV107X_MUX_CFG(9, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(9, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(9, 5, MUX_MODE_4),
- TNETV107X_MUX_CFG(9, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(9, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(9, 10, MUX_MODE_4),
- TNETV107X_MUX_CFG(9, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(9, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(9, 15, MUX_MODE_4),
- TNETV107X_MUX_CFG(9, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(9, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(9, 20, MUX_MODE_4),
- TNETV107X_MUX_CFG(10, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(10, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(10, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(10, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(10, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(10, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(10, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(10, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(10, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(10, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(10, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(10, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(11, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(11, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(12, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(12, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(12, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(12, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(12, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(12, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(13, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(13, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(13, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(13, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(14, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(14, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(14, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(14, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(14, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(14, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(15, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(15, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(15, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(15, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(15, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(15, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(15, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(15, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(16, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(16, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(16, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(16, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(16, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(16, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(16, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(17, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(17, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(17, 0, MUX_MODE_3),
- TNETV107X_MUX_CFG(17, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(17, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(17, 5, MUX_MODE_3),
- TNETV107X_MUX_CFG(17, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(17, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(17, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(17, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(17, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(17, 15, MUX_MODE_3),
- TNETV107X_MUX_CFG(18, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(18, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(18, 0, MUX_MODE_3),
- TNETV107X_MUX_CFG(18, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(18, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(18, 5, MUX_MODE_3),
- TNETV107X_MUX_CFG(18, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(18, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(18, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(18, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(18, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(18, 15, MUX_MODE_3),
- TNETV107X_MUX_CFG(19, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(19, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(19, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(19, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(19, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(19, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(20, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(20, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(20, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(20, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(20, 15, MUX_MODE_3),
- TNETV107X_MUX_CFG(20, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(20, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(21, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(21, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(21, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(21, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(21, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(21, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 5, MUX_MODE_3),
- TNETV107X_MUX_CFG(22, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(22, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(22, 15, MUX_MODE_3),
- TNETV107X_MUX_CFG(22, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 20, MUX_MODE_3),
- TNETV107X_MUX_CFG(22, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(22, 25, MUX_MODE_3),
- TNETV107X_MUX_CFG(23, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(23, 0, MUX_MODE_3),
- TNETV107X_MUX_CFG(23, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(23, 5, MUX_MODE_3),
- TNETV107X_MUX_CFG(23, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(23, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(24, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(24, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(24, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(24, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(24, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(24, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(24, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(24, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(24, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(24, 15, MUX_MODE_3),
- TNETV107X_MUX_CFG(24, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(24, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(24, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(24, 25, MUX_MODE_2),
- TNETV107X_MUX_CFG(25, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(25, 0, MUX_MODE_2),
- TNETV107X_MUX_CFG(25, 0, MUX_MODE_3),
- TNETV107X_MUX_CFG(25, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(25, 5, MUX_MODE_2),
- TNETV107X_MUX_CFG(25, 5, MUX_MODE_3),
- TNETV107X_MUX_CFG(25, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(25, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(25, 10, MUX_MODE_3),
- TNETV107X_MUX_CFG(25, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(25, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(25, 15, MUX_MODE_3),
- TNETV107X_MUX_CFG(25, 15, MUX_MODE_4),
- TNETV107X_MUX_CFG(26, 0, MUX_MODE_1),
- TNETV107X_MUX_CFG(26, 5, MUX_MODE_1),
- TNETV107X_MUX_CFG(26, 10, MUX_MODE_1),
- TNETV107X_MUX_CFG(26, 10, MUX_MODE_2),
- TNETV107X_MUX_CFG(26, 15, MUX_MODE_1),
- TNETV107X_MUX_CFG(26, 15, MUX_MODE_2),
- TNETV107X_MUX_CFG(26, 20, MUX_MODE_1),
- TNETV107X_MUX_CFG(26, 20, MUX_MODE_2),
- TNETV107X_MUX_CFG(26, 25, MUX_MODE_1),
- TNETV107X_MUX_CFG(26, 25, MUX_MODE_2),
-};
-
-const int pin_table_size = sizeof(pin_table) / sizeof(pin_table[0]);
-
-int mux_select_pin(short index)
-{
- const struct pin_config *cfg;
- unsigned long mask, mode, reg;
-
- if (index >= pin_table_size)
- return 0;
-
- cfg = &pin_table[index];
-
- mask = 0x1f << cfg->mask_offset;
- mode = cfg->mode << cfg->mask_offset;
-
- reg = __raw_readl(TNETV107X_PINMUX(cfg->reg_index));
- reg = (reg & ~mask) | mode;
- __raw_writel(reg, TNETV107X_PINMUX(cfg->reg_index));
-
- return 1;
-}
-
-int mux_select_pins(const short *pins)
-{
- int i, ret = 1;
-
- for (i = 0; pins[i] >= 0; i++)
- ret &= mux_select_pin(pins[i]);
-
- return ret;
-}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/timer.c b/arch/arm/cpu/arm1176/tnetv107x/timer.c
deleted file mode 100644
index 6e0dd0d..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/timer.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * TNETV107X: Timer implementation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-
-struct timer_regs {
- u_int32_t pid12;
- u_int32_t pad[3];
- u_int32_t tim12;
- u_int32_t tim34;
- u_int32_t prd12;
- u_int32_t prd34;
- u_int32_t tcr;
- u_int32_t tgcr;
- u_int32_t wdtcr;
-};
-
-#define regs ((struct timer_regs *)CONFIG_SYS_TIMERBASE)
-
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
-#define TIM_CLK_DIV 16
-
-static ulong timestamp;
-static ulong lastinc;
-
-int timer_init(void)
-{
- clk_enable(TNETV107X_LPSC_TIMER0);
-
- lastinc = timestamp = 0;
-
- /* We are using timer34 in unchained 32-bit mode, full speed */
- __raw_writel(0x0, &regs->tcr);
- __raw_writel(0x0, &regs->tgcr);
- __raw_writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &regs->tgcr);
- __raw_writel(0x0, &regs->tim34);
- __raw_writel(TIMER_LOAD_VAL, &regs->prd34);
- __raw_writel(2 << 22, &regs->tcr);
-
- return 0;
-}
-
-static ulong get_timer_raw(void)
-{
- ulong now = __raw_readl(&regs->tim34);
-
- if (now >= lastinc)
- timestamp += now - lastinc;
- else
- timestamp += now + TIMER_LOAD_VAL - lastinc;
-
- lastinc = now;
-
- return timestamp;
-}
-
-ulong get_timer(ulong base)
-{
- return (get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base;
-}
-
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-void __udelay(unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- tmo = CONFIG_SYS_HZ_CLOCK / 1000;
- tmo *= usec;
- tmo /= (1000 * TIM_CLK_DIV);
-
- endtime = get_timer_raw() + tmo;
-
- do {
- ulong now = get_timer_raw();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-ulong get_tbclk(void)
-{
- return CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/cpu/arm720t/Makefile b/arch/arm/cpu/arm720t/Makefile
index 9f61ea2..243a123 100644
--- a/arch/arm/cpu/arm720t/Makefile
+++ b/arch/arm/cpu/arm720t/Makefile
@@ -7,9 +7,3 @@
extra-y = start.o
obj-y = interrupts.o cpu.o
-
-obj-$(CONFIG_TEGRA) += tegra-common/
-obj-$(CONFIG_TEGRA20) += tegra20/
-obj-$(CONFIG_TEGRA30) += tegra30/
-obj-$(CONFIG_TEGRA114) += tegra114/
-obj-$(CONFIG_TEGRA124) += tegra124/
diff --git a/arch/arm/cpu/arm720t/tegra-common/Makefile b/arch/arm/cpu/arm720t/tegra-common/Makefile
deleted file mode 100644
index a9c2b67..0000000
--- a/arch/arm/cpu/arm720t/tegra-common/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_SPL_BUILD) += spl.o
-obj-y += cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra114/Makefile b/arch/arm/cpu/arm720t/tegra114/Makefile
deleted file mode 100644
index ea3e55e..0000000
--- a/arch/arm/cpu/arm720t/tegra114/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-#obj-y += cpu.o t11x.o
-obj-y += cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra124/Makefile b/arch/arm/cpu/arm720t/tegra124/Makefile
deleted file mode 100644
index 61abf45..0000000
--- a/arch/arm/cpu/arm720t/tegra124/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2013-2014
-# NVIDIA Corporation <www.nvidia.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra20/Makefile b/arch/arm/cpu/arm720t/tegra20/Makefile
deleted file mode 100644
index 12243fa..0000000
--- a/arch/arm/cpu/arm720t/tegra20/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra30/Makefile b/arch/arm/cpu/arm720t/tegra30/Makefile
deleted file mode 100644
index 6ff4c55..0000000
--- a/arch/arm/cpu/arm720t/tegra30/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-obj-y += cpu.o
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index a72e5de..6582938 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -10,9 +10,6 @@ extra-y = start.o
obj-y += cpu.o
obj-$(CONFIG_USE_IRQ) += interrupts.o
-obj-$(if $(filter a320,$(SOC)),y) += a320/
-obj-$(CONFIG_AT91FAMILY) += at91/
obj-$(CONFIG_EP93XX) += ep93xx/
obj-$(CONFIG_IMX) += imx/
-obj-$(CONFIG_KS8695) += ks8695/
obj-$(CONFIG_S3C24X0) += s3c24x0/
diff --git a/arch/arm/cpu/arm920t/a320/Makefile b/arch/arm/cpu/arm920t/a320/Makefile
deleted file mode 100644
index bbdab58..0000000
--- a/arch/arm/cpu/arm920t/a320/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += reset.o
-obj-y += timer.o
diff --git a/arch/arm/cpu/arm920t/a320/reset.S b/arch/arm/cpu/arm920t/a320/reset.S
deleted file mode 100644
index 81f9dc9..0000000
--- a/arch/arm/cpu/arm920t/a320/reset.S
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-.global reset_cpu
-reset_cpu:
- b reset_cpu
diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c
deleted file mode 100644
index 1ac5b60..0000000
--- a/arch/arm/cpu/arm920t/a320/timer.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <div64.h>
-#include <asm/io.h>
-#include <faraday/ftpmu010.h>
-#include <faraday/fttmr010.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define TIMER_CLOCK 32768
-#define TIMER_LOAD_VAL 0xffffffff
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- tick *= CONFIG_SYS_HZ;
- do_div(tick, gd->arch.timer_rate_hz);
-
- return tick;
-}
-
-static inline unsigned long long usec_to_tick(unsigned long long usec)
-{
- usec *= gd->arch.timer_rate_hz;
- do_div(usec, 1000000);
-
- return usec;
-}
-
-int timer_init(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
- unsigned int cr;
-
- debug("%s()\n", __func__);
-
- /* disable timers */
- writel(0, &tmr->cr);
-
- /* use 32768Hz oscillator for RTC, WDT, TIMER */
- ftpmu010_32768osc_enable();
-
- /* setup timer */
- writel(TIMER_LOAD_VAL, &tmr->timer3_load);
- writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
- writel(0, &tmr->timer3_match1);
- writel(0, &tmr->timer3_match2);
-
- /* we don't want timer to issue interrupts */
- writel(FTTMR010_TM3_MATCH1 |
- FTTMR010_TM3_MATCH2 |
- FTTMR010_TM3_OVERFLOW,
- &tmr->interrupt_mask);
-
- cr = readl(&tmr->cr);
- cr |= FTTMR010_TM3_CLOCK; /* use external clock */
- cr |= FTTMR010_TM3_ENABLE;
- writel(cr, &tmr->cr);
-
- gd->arch.timer_rate_hz = TIMER_CLOCK;
- gd->arch.tbu = gd->arch.tbl = 0;
-
- return 0;
-}
-
-/*
- * Get the current 64 bit timer tick count
- */
-unsigned long long get_ticks(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
- ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
-
- /* increment tbu if tbl has rolled over */
- if (now < gd->arch.tbl)
- gd->arch.tbu++;
- gd->arch.tbl = now;
- return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
-}
-
-void __udelay(unsigned long usec)
-{
- unsigned long long start;
- ulong tmo;
-
- start = get_ticks(); /* get current timestamp */
- tmo = usec_to_tick(usec); /* convert usecs to ticks */
- while ((get_ticks() - start) < tmo)
- ; /* loop till time has passed */
-}
-
-/*
- * get_timer(base) can be used to check for timeouts or
- * to measure elasped time relative to an event:
- *
- * ulong start_time = get_timer(0) sets start_time to the current
- * time value.
- * get_timer(start_time) returns the time elapsed since then.
- *
- * The time is used in CONFIG_SYS_HZ units!
- */
-ulong get_timer(ulong base)
-{
- return tick_to_time(get_ticks()) - base;
-}
-
-/*
- * Return the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return gd->arch.timer_rate_hz;
-}
diff --git a/arch/arm/cpu/arm920t/ks8695/Makefile b/arch/arm/cpu/arm920t/ks8695/Makefile
deleted file mode 100644
index 400aa89..0000000
--- a/arch/arm/cpu/arm920t/ks8695/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = lowlevel_init.o
-obj-y += timer.o
diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
deleted file mode 100644
index a2a07f2..0000000
--- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * lowlevel_init.S - basic hardware initialization for the KS8695 CPU
- *
- * Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/platform.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- *************************************************************************
- *
- * Handy dandy macros
- *
- *************************************************************************
- */
-
-/* Delay a bit */
-.macro DELAY_FOR cycles, reg0
- ldr \reg0, =\cycles
- subs \reg0, \reg0, #1
- subne pc, pc, #0xc
-.endm
-
-/*
- *************************************************************************
- *
- * Some local storage.
- *
- *************************************************************************
- */
-
-/* Should we boot with an interactive console or not */
-.globl serial_console
-
-/*
- *************************************************************************
- *
- * Raw hardware initialization code. The important thing is to get
- * SDRAM setup and running. We do some other basic things here too,
- * like getting the PLL set for high speed, and init the LEDs.
- *
- *************************************************************************
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-#if DEBUG
- /*
- * enable UART for early debug trace
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
- mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
- str r2, [r1]
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
- mov r2, #KS8695_UART_LINEC_WLEN8
- str r2, [r1] /* 8 data bits, no parity, 1 stop */
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
- mov r2, #0x41
- str r2, [r1] /* write 'A' */
-#endif
-#if DEBUG
- ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
- mov r2, #0x42
- str r2, [r1]
-#endif
-
- /*
- * remap the memory and flash regions. we want to end up with
- * ram from address 0, and flash at 32MB.
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
- ldr r2, =0xbfc00040
- str r2, [r1] /* large flash map */
- ldr pc, =(highflash+0x02000000-0x00f00000) /* jump to high flash address */
-highflash:
- ldr r2, =0x8fe00040
- str r2, [r1] /* remap flash range */
-
- /*
- * remap the second select region to the 4MB immediately after
- * the first region. This way if you have a larger flash (say 8Mb)
- * then you can have it all mapped nicely. Has no effect if you
- * only have a 4Mb or smaller flash.
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1)
- ldr r2, =0x9fe40040
- str r2, [r1] /* remap flash2 region, contiguous */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
- ldr r2, =0x30000005
- str r2, [r1] /* enable both flash selects */
-
-#ifdef CONFIG_CM41xx
- /*
- * map the second flash chip, using the external IO lines.
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0)
- ldr r2, =0xafe80b6d
- str r2, [r1] /* remap io0 region, contiguous */
- ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1)
- ldr r2, =0xbfec0b6d
- str r2, [r1] /* remap io1 region, contiguous */
- ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
- ldr r2, =0x30050005
- str r2, [r1] /* enable second flash */
-#endif
-
- /*
- * before relocating, we have to setup RAM timing
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0)
-#if (PHYS_SDRAM_1_SIZE == 0x02000000)
- ldr r2, =0x7fc0000e /* 32MB */
-#else
- ldr r2, =0x3fc0000e /* 16MB */
-#endif
- str r2, [r1] /* configure sdram bank0 setup */
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1)
- mov r2, #0
- str r2, [r1] /* configure sdram bank1 setup */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL)
- ldr r2, =0x0000000a
- str r2, [r1] /* set RAS/CAS timing */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
- ldr r2, =0x00030000
- str r2, [r1] /* send NOP command */
- DELAY_FOR 0x100, r0
- ldr r2, =0x00010000
- str r2, [r1] /* send PRECHARGE-ALL */
- DELAY_FOR 0x100, r0
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH)
- ldr r2, =0x00000020
- str r2, [r1] /* set for fast refresh */
- DELAY_FOR 0x100, r0
- ldr r2, =0x00000190
- str r2, [r1] /* set normal refresh timing */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
- ldr r2, =0x00020033
- str r2, [r1] /* send mode command */
- DELAY_FOR 0x100, r0
- ldr r2, =0x01f00000
- str r2, [r1] /* enable sdram fifos */
-
- /*
- * set pll to top speed
- */
- ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK)
- mov r2, #0
- str r2, [r1] /* set pll clock to 166MHz */
-
- ldr r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0)
- ldr r2, [r1] /* Get switch ctrl0 register */
- and r2, r2, #0x0fc00000 /* Mask out LED control bits */
- orr r2, r2, #0x01800000 /* Set Link/activity/speed actions */
- str r2, [r1]
-
-#ifdef CONFIG_CM4008
- ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE)
- ldr r2, =0x0000fe30
- str r2, [r1] /* enable LED's as outputs */
- ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA)
- ldr r2, =0x0000fe20
- str r2, [r1] /* turn on power LED */
-#endif
-#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx)
- ldr r2, [r1] /* get current GPIO input data */
- tst r2, #0x8 /* check if "erase" depressed */
- beq nobutton
- mov r2, #0 /* be quiet on boot, no console */
- ldr r1, =serial_console
- str r2, [r1]
-nobutton:
-#endif
-
- add lr, lr, #0x02000000 /* flash is now mapped high */
- add ip, ip, #0x02000000 /* this is a hack */
- mov pc, lr /* all done, return */
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/arch/arm/cpu/arm920t/ks8695/timer.c b/arch/arm/cpu/arm920t/ks8695/timer.c
deleted file mode 100644
index 23db557..0000000
--- a/arch/arm/cpu/arm920t/ks8695/timer.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-
-/*
- * Initial timer set constants. Nothing complicated, just set for a 1ms
- * tick.
- */
-#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_1)
-#define TIMER_COUNT (TIMER_INTERVAL / 2)
-#define TIMER_PULSE TIMER_COUNT
-
-/*
- * Handy KS8695 register access functions.
- */
-#define ks8695_read(a) *((volatile ulong *) (KS8695_IO_BASE + (a)))
-#define ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v)
-
-ulong timer_ticks;
-
-int timer_init (void)
-{
- /* Set the hadware timer for 1ms */
- ks8695_write(KS8695_TIMER1, TIMER_COUNT);
- ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE);
- ks8695_write(KS8695_TIMER_CTRL, 0x2);
- timer_ticks = 0;
-
- return 0;
-}
-
-ulong get_timer_masked(void)
-{
- /* Check for timer wrap */
- if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) {
- /* Clear interrupt condition */
- ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1);
- timer_ticks++;
- }
- return timer_ticks;
-}
-
-ulong get_timer(ulong base)
-{
- return (get_timer_masked() - base);
-}
-
-void __udelay(ulong usec)
-{
- ulong start = get_timer_masked();
- ulong end;
-
- /* Only 1ms resolution :-( */
- end = usec / 1000;
- while (get_timer(start) < end)
- ;
-}
-
-void reset_cpu (ulong ignored)
-{
- ulong tc;
-
- /* Set timer0 to watchdog, and let it timeout */
- tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2;
- ks8695_write(KS8695_TIMER_CTRL, tc);
- ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff));
- ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1));
-
- /* Should only wait here till watchdog resets */
- for (;;)
- ;
-}
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index adcea9f..63fa159 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -15,16 +15,8 @@ endif
endif
obj-$(CONFIG_ARMADA100) += armada100/
-obj-$(CONFIG_AT91FAMILY) += at91/
-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
-obj-$(CONFIG_KIRKWOOD) += kirkwood/
obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
-obj-$(CONFIG_MB86R0x) += mb86r0x/
obj-$(CONFIG_MX25) += mx25/
obj-$(CONFIG_MX27) += mx27/
obj-$(if $(filter mxs,$(SOC)),y) += mxs/
-obj-$(CONFIG_ARCH_NOMADIK) += nomadik/
-obj-$(CONFIG_ORION5X) += orion5x/
-obj-$(CONFIG_PANTHEON) += pantheon/
obj-$(if $(filter spear,$(SOC)),y) += spear/
-obj-$(CONFIG_ARCH_VERSATILE) += versatile/
diff --git a/arch/arm/cpu/arm926ejs/at91/config.mk b/arch/arm/cpu/arm926ejs/at91/config.mk
deleted file mode 100644
index 370630d..0000000
--- a/arch/arm/cpu/arm926ejs/at91/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-PF_CPPFLAGS_TUNE := $(call cc-option,-mtune=arm926ejs,)
-PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_TUNE)
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
deleted file mode 100644
index 365892c..0000000
--- a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = clock.o reset.o timer.o
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/clock.c b/arch/arm/cpu/arm926ejs/mb86r0x/clock.c
deleted file mode 100644
index 1f6f66e..0000000
--- a/arch/arm/cpu/arm926ejs/mb86r0x/clock.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * (C) Copyright 2010
- * Matthias Weisser <weisserm@arcor.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-/*
- * Get the peripheral bus frequency depending on pll pin settings
- */
-ulong get_bus_freq(ulong dummy)
-{
- struct mb86r0x_crg * crg = (struct mb86r0x_crg *)
- MB86R0x_CRG_BASE;
- uint32_t pllmode;
-
- pllmode = readl(&crg->crpr) & MB86R0x_CRG_CRPR_PLLMODE;
-
- if (pllmode == MB86R0x_CRG_CRPR_PLLMODE_X20)
- return 40000000;
-
- return 41164767;
-}
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/reset.c b/arch/arm/cpu/arm926ejs/mb86r0x/reset.c
deleted file mode 100644
index 7bd77ff..0000000
--- a/arch/arm/cpu/arm926ejs/mb86r0x/reset.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2010
- * Matthias Weisser <weisserm@arcor.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-/*
- * Reset the cpu by setting software reset request bit
- */
-void reset_cpu(ulong ignored)
-{
- struct mb86r0x_crg * crg = (struct mb86r0x_crg *)
- MB86R0x_CRG_BASE;
-
- writel(MB86R0x_CRSR_SWRSTREQ, &crg->crsr);
- while (1)
- /* NOP */;
- /* Never reached */
-}
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
deleted file mode 100644
index bb07819..0000000
--- a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2010
- * Matthias Weisser, Graf-Syteco <weisserm@arcor.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <div64.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-#define TIMER_LOAD_VAL 0xffffffff
-#define TIMER_FREQ (CONFIG_MB86R0x_IOCLK / 256)
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define timestamp gd->arch.tbl
-#define lastdec gd->arch.lastinc
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- tick *= CONFIG_SYS_HZ;
- do_div(tick, TIMER_FREQ);
-
- return tick;
-}
-
-static inline unsigned long long usec_to_tick(unsigned long long usec)
-{
- usec *= TIMER_FREQ;
- do_div(usec, 1000000);
-
- return usec;
-}
-
-/* nothing really to do with interrupts, just starts up a counter. */
-int timer_init(void)
-{
- struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
- MB86R0x_TIMER_BASE;
- ulong ctrl = readl(&timer->control);
-
- writel(TIMER_LOAD_VAL, &timer->load);
-
- ctrl |= MB86R0x_TIMER_ENABLE | MB86R0x_TIMER_PRS_8S |
- MB86R0x_TIMER_SIZE_32;
-
- writel(ctrl, &timer->control);
-
- /* capture current value time */
- lastdec = readl(&timer->value);
- timestamp = 0; /* start "advancing" time stamp from 0 */
-
- return 0;
-}
-
-/*
- * timer without interrupts
- */
-unsigned long long get_ticks(void)
-{
- struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
- MB86R0x_TIMER_BASE;
- ulong now = readl(&timer->value);
-
- if (now <= lastdec) {
- /* normal mode (non roll) */
- /* move stamp forward with absolut diff ticks */
- timestamp += lastdec - now;
- } else {
- /* we have rollover of incrementer */
- timestamp += lastdec + TIMER_LOAD_VAL - now;
- }
- lastdec = now;
- return timestamp;
-}
-
-ulong get_timer_masked(void)
-{
- return tick_to_time(get_ticks());
-}
-
-void __udelay(unsigned long usec)
-{
- unsigned long long tmp;
- ulong tmo;
-
- tmo = usec_to_tick(usec);
- tmp = get_ticks(); /* get current timestamp */
-
- while ((get_ticks() - tmp) < tmo) /* loop till event */
- /*NOP*/;
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- ulong tbclk;
-
- tbclk = TIMER_FREQ;
- return tbclk;
-}
diff --git a/arch/arm/cpu/arm926ejs/pantheon/Makefile b/arch/arm/cpu/arm926ejs/pantheon/Makefile
deleted file mode 100644
index 988341f..0000000
--- a/arch/arm/cpu/arm926ejs/pantheon/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2011
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Lei Wen <leiwen@marvell.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = cpu.o timer.o dram.o
diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c
deleted file mode 100644
index 4e2a177..0000000
--- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/pantheon.h>
-
-#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
-#define SET_MRVL_ID (1<<8)
-#define L2C_RAM_SEL (1<<4)
-
-int arch_cpu_init(void)
-{
- u32 val;
- struct panthcpu_registers *cpuregs =
- (struct panthcpu_registers*) PANTHEON_CPU_BASE;
-
- struct panthapb_registers *apbclkres =
- (struct panthapb_registers*) PANTHEON_APBC_BASE;
-
- struct panthmpmu_registers *mpmu =
- (struct panthmpmu_registers*) PANTHEON_MPMU_BASE;
-
- struct panthapmu_registers *apmu =
- (struct panthapmu_registers *) PANTHEON_APMU_BASE;
-
- /* set SEL_MRVL_ID bit in PANTHEON_CPU_CONF register */
- val = readl(&cpuregs->cpu_conf);
- val = val | SET_MRVL_ID;
- writel(val, &cpuregs->cpu_conf);
-
- /* Turn on clock gating (PMUM_CCGR) */
- writel(0xFFFFFFFF, &mpmu->ccgr);
-
- /* Turn on clock gating (PMUM_ACGR) */
- writel(0xFFFFFFFF, &mpmu->acgr);
-
- /* Turn on uart2 clock */
- writel(UARTCLK14745KHZ, &apbclkres->uart0);
-
- /* Enable GPIO clock */
- writel(APBC_APBCLK, &apbclkres->gpio);
-
-#ifdef CONFIG_I2C_MV
- /* Enable I2C clock */
- writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
- writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi);
-#endif
-
-#ifdef CONFIG_MV_SDHCI
- /* Enable mmc clock */
- writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST,
- &apmu->sd1);
- writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST,
- &apmu->sd3);
-#endif
-
- icache_enable();
-
- return 0;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
- u32 id;
- struct panthcpu_registers *cpuregs =
- (struct panthcpu_registers*) PANTHEON_CPU_BASE;
-
- id = readl(&cpuregs->chip_id);
- printf("SoC: PANTHEON 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
- return 0;
-}
-#endif
-
-#ifdef CONFIG_I2C_MV
-void i2c_clk_enable(void)
-{
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/pantheon/dram.c b/arch/arm/cpu/arm926ejs/pantheon/dram.c
deleted file mode 100644
index f77e3d0..0000000
--- a/arch/arm/cpu/arm926ejs/pantheon/dram.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>,
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/pantheon.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Pantheon DRAM controller supports upto 8 banks
- * for chip select 0 and 1
- */
-
-/*
- * DDR Memory Control Registers
- * Refer Datasheet 4.4
- */
-struct panthddr_map_registers {
- u32 cs; /* Memory Address Map Register -CS */
- u32 pad[3];
-};
-
-struct panthddr_registers {
- u8 pad[0x100 - 0x000];
- struct panthddr_map_registers mmap[2];
-};
-
-/*
- * panth_sdram_base - reads SDRAM Base Address Register
- */
-u32 panth_sdram_base(int chip_sel)
-{
- struct panthddr_registers *ddr_regs =
- (struct panthddr_registers *)PANTHEON_DRAM_BASE;
- u32 result = 0;
- u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
- if (!CS_valid)
- return 0;
-
- result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
- return result;
-}
-
-/*
- * panth_sdram_size - reads SDRAM size
- */
-u32 panth_sdram_size(int chip_sel)
-{
- struct panthddr_registers *ddr_regs =
- (struct panthddr_registers *)PANTHEON_DRAM_BASE;
- u32 result = 0;
- u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
- if (!CS_valid)
- return 0;
-
- result = readl(&ddr_regs->mmap[chip_sel].cs);
- result = (result >> 16) & 0xF;
- if (result < 0x7) {
- printf("Unknown DRAM Size\n");
- return -1;
- } else {
- return ((0x8 << (result - 0x7)) * 1024 * 1024);
- }
-}
-
-#ifndef CONFIG_SYS_BOARD_DRAM_INIT
-int dram_init(void)
-{
- int i;
-
- gd->ram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- gd->bd->bi_dram[i].start = panth_sdram_base(i);
- gd->bd->bi_dram[i].size = panth_sdram_size(i);
- /*
- * It is assumed that all memory banks are consecutive
- * and without gaps.
- * If the gap is found, ram_size will be reported for
- * consecutive memory only
- */
- if (gd->bd->bi_dram[i].start != gd->ram_size)
- break;
-
- gd->ram_size += gd->bd->bi_dram[i].size;
-
- }
-
- for (; i < CONFIG_NR_DRAM_BANKS; i++) {
- /*
- * If above loop terminated prematurely, we need to set
- * remaining banks' start address & size as 0. Otherwise other
- * u-boot functions and Linux kernel gets wrong values which
- * could result in crash
- */
- gd->bd->bi_dram[i].start = 0;
- gd->bd->bi_dram[i].size = 0;
- }
- return 0;
-}
-
-/*
- * If this function is not defined here,
- * board.c alters dram bank zero configuration defined above.
- */
-void dram_init_banksize(void)
-{
- dram_init();
-}
-#endif /* CONFIG_SYS_BOARD_DRAM_INIT */
diff --git a/arch/arm/cpu/arm926ejs/pantheon/timer.c b/arch/arm/cpu/arm926ejs/pantheon/timer.c
deleted file mode 100644
index 6382d3b..0000000
--- a/arch/arm/cpu/arm926ejs/pantheon/timer.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/pantheon.h>
-
-/*
- * Timer registers
- * Refer 6.2.9 in Datasheet
- */
-struct panthtmr_registers {
- u32 clk_ctrl; /* Timer clk control reg */
- u32 match[9]; /* Timer match registers */
- u32 count[3]; /* Timer count registers */
- u32 status[3];
- u32 ie[3];
- u32 preload[3]; /* Timer preload value */
- u32 preload_ctrl[3];
- u32 wdt_match_en;
- u32 wdt_match_r;
- u32 wdt_val;
- u32 wdt_sts;
- u32 icr[3];
- u32 wdt_icr;
- u32 cer; /* Timer count enable reg */
- u32 cmr;
- u32 ilr[3];
- u32 wcr;
- u32 wfar;
- u32 wsar;
- u32 cvwr[3];
-};
-
-#define TIMER 0 /* Use TIMER 0 */
-/* Each timer has 3 match registers */
-#define MATCH_CMP(x) ((3 * TIMER) + x)
-#define TIMER_LOAD_VAL 0xffffffff
-#define COUNT_RD_REQ 0x1
-
-DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
-
-/*
- * For preventing risk of instability in reading counter value,
- * first set read request to register cvwr and then read same
- * register after it captures counter value.
- */
-ulong read_timer(void)
-{
- struct panthtmr_registers *panthtimers =
- (struct panthtmr_registers *) PANTHEON_TIMER_BASE;
- volatile int loop=100;
- ulong val;
-
- writel(COUNT_RD_REQ, &panthtimers->cvwr);
- while (loop--)
- val = readl(&panthtimers->cvwr);
-
- /*
- * This stop gcc complain and prevent loop mistake init to 0
- */
- val = readl(&panthtimers->cvwr);
-
- return val;
-}
-
-ulong get_timer_masked(void)
-{
- ulong now = read_timer();
-
- if (now >= gd->arch.tbl) {
- /* normal mode */
- gd->arch.tbu += now - gd->arch.tbl;
- } else {
- /* we have an overflow ... */
- gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
- }
- gd->arch.tbl = now;
-
- return gd->arch.tbu;
-}
-
-ulong get_timer(ulong base)
-{
- return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
- base);
-}
-
-void __udelay(unsigned long usec)
-{
- ulong delayticks;
- ulong endtime;
-
- delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
- endtime = get_timer_masked() + delayticks;
-
- while (get_timer_masked() < endtime)
- ;
-}
-
-/*
- * init the Timer
- */
-int timer_init(void)
-{
- struct panthapb_registers *apb1clkres =
- (struct panthapb_registers *) PANTHEON_APBC_BASE;
- struct panthtmr_registers *panthtimers =
- (struct panthtmr_registers *) PANTHEON_TIMER_BASE;
-
- /* Enable Timer clock at 3.25 MHZ */
- writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
-
- /* load value into timer */
- writel(0x0, &panthtimers->clk_ctrl);
- /* Use Timer 0 Match Resiger 0 */
- writel(TIMER_LOAD_VAL, &panthtimers->match[MATCH_CMP(0)]);
- /* Preload value is 0 */
- writel(0x0, &panthtimers->preload[TIMER]);
- /* Enable match comparator 0 for Timer 0 */
- writel(0x1, &panthtimers->preload_ctrl[TIMER]);
-
- /* Enable timer 0 */
- writel(0x1, &panthtimers->cer);
- /* init the gd->arch.tbu and gd->arch.tbl value */
- gd->arch.tbl = read_timer();
- gd->arch.tbu = 0;
-
- return 0;
-}
-
-#define MPMU_APRR_WDTR (1<<4)
-#define TMR_WFAR 0xbaba /* WDT Register First key */
-#define TMP_WSAR 0xeb10 /* WDT Register Second key */
-
-/*
- * This function uses internal Watchdog Timer
- * based reset mechanism.
- * Steps to write watchdog registers (protected access)
- * 1. Write key value to TMR_WFAR reg.
- * 2. Write key value to TMP_WSAR reg.
- * 3. Perform write operation.
- */
-void reset_cpu (unsigned long ignored)
-{
- struct panthmpmu_registers *mpmu =
- (struct panthmpmu_registers *) PANTHEON_MPMU_BASE;
- struct panthtmr_registers *panthtimers =
- (struct panthtmr_registers *) PANTHEON_WD_TIMER_BASE;
- u32 val;
-
- /* negate hardware reset to the WDT after system reset */
- val = readl(&mpmu->aprr);
- val = val | MPMU_APRR_WDTR;
- writel(val, &mpmu->aprr);
-
- /* reset/enable WDT clock */
- writel(APBC_APBCLK, &mpmu->wdtpcr);
-
- /* clear previous WDT status */
- writel(TMR_WFAR, &panthtimers->wfar);
- writel(TMP_WSAR, &panthtimers->wsar);
- writel(0, &panthtimers->wdt_sts);
-
- /* set match counter */
- writel(TMR_WFAR, &panthtimers->wfar);
- writel(TMP_WSAR, &panthtimers->wsar);
- writel(0xf, &panthtimers->wdt_match_r);
-
- /* enable WDT reset */
- writel(TMR_WFAR, &panthtimers->wfar);
- writel(TMP_WSAR, &panthtimers->wsar);
- writel(0x3, &panthtimers->wdt_match_en);
-
- /*enable functional WDT clock */
- writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- return (ulong)CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 409e6f5..b228ed6 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_IPROC) += iproc-common/
obj-$(CONFIG_KONA) += kona-common/
obj-$(CONFIG_OMAP_COMMON) += omap-common/
obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
-obj-$(CONFIG_TEGRA) += tegra-common/
ifneq (,$(filter s5pc1xx exynos,$(SOC)))
obj-y += s5p-common/
@@ -40,13 +39,11 @@ endif
obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/
-obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(CONFIG_BCM2835) += bcm2835/
obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
obj-$(CONFIG_ARCH_EXYNOS) += exynos/
-obj-$(CONFIG_ARCH_HIGHBANK) += highbank/
-obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
obj-$(if $(filter mx5,$(SOC)),y) += mx5/
obj-$(CONFIG_MX6) += mx6/
@@ -58,7 +55,6 @@ obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
obj-$(CONFIG_SOCFPGA) += socfpga/
obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
-obj-$(CONFIG_TEGRA20) += tegra20/
obj-$(CONFIG_U8500) += u8500/
obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/
obj-$(CONFIG_VF610) += vf610/
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index 31188c8..529a119 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -118,4 +118,7 @@ void enable_basic_clocks(void)
/* Select the Master osc clk as Timer2 clock source */
writel(0x1, &cmdpll->clktimer2clk);
+
+ /* For OPP100 the mac clock should be /5. */
+ writel(0x4, &cmdpll->clkselmacclk);
}
diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk
deleted file mode 100644
index db60308..0000000
--- a/arch/arm/cpu/armv7/at91/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-ifndef CONFIG_SPL_BUILD
-ALL-y += u-boot.img
-endif
diff --git a/arch/arm/cpu/armv7/bcm2835/Makefile b/arch/arm/cpu/armv7/bcm2835/Makefile
new file mode 100644
index 0000000..ed1ee47
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm2835/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2012 Stephen Warren
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+src_dir := ../../arm1176/bcm2835/
+
+obj-y :=
+obj-y += $(src_dir)/init.o
+obj-y += $(src_dir)/reset.o
+obj-y += $(src_dir)/timer.o
+obj-y += $(src_dir)/mbox.o
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index 7fcb5d2..eb86a7f 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -6,7 +6,7 @@ choice
config TARGET_SMDKV310
select SUPPORT_SPL
bool "Exynos4210 SMDKV310 board"
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_TRATS
bool "Exynos4210 Trats board"
@@ -33,38 +33,59 @@ config TARGET_ARNDALE
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_SMDK5250
bool "SMDK5250 board"
select SUPPORT_SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_SNOW
bool "Snow board"
select SUPPORT_SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_SMDK5420
bool "SMDK5420 board"
select SUPPORT_SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_PEACH_PI
bool "Peach Pi board"
select SUPPORT_SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_PEACH_PIT
bool "Peach Pit board"
select SUPPORT_SPL
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
endchoice
config SYS_SOC
default "exynos"
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_SPI
+ default y
+
+config DM_SPI_FLASH
+ default y
+
+config DM_GPIO
+ default y
+
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x400
+
source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index b31c13b..c6455c2 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -20,42 +20,84 @@
* positions of the peripheral clocks of the src and div registers
*/
struct clk_bit_info {
+ enum periph_id id;
+ int32_t src_mask;
+ int32_t div_mask;
+ int32_t prediv_mask;
int8_t src_bit;
int8_t div_bit;
int8_t prediv_bit;
};
-/* src_bit div_bit prediv_bit */
-static struct clk_bit_info clk_bit_info[] = {
- {0, 0, -1},
- {4, 4, -1},
- {8, 8, -1},
- {12, 12, -1},
- {0, 0, 8},
- {4, 16, 24},
- {8, 0, 8},
- {12, 16, 24},
- {-1, -1, -1},
- {16, 0, 8},
- {20, 16, 24},
- {24, 0, 8},
- {0, 0, 4},
- {4, 12, 16},
- {-1, -1, -1},
- {-1, -1, -1},
- {-1, 24, 0},
- {-1, 24, 0},
- {-1, 24, 0},
- {-1, 24, 0},
- {-1, 24, 0},
- {-1, 24, 0},
- {-1, 24, 0},
- {-1, 24, 0},
- {24, 0, -1},
- {24, 0, -1},
- {24, 0, -1},
- {24, 0, -1},
- {24, 0, -1},
+static struct clk_bit_info exynos5_bit_info[] = {
+ /* periph id s_mask d_mask p_mask s_bit d_bit p_bit */
+ {PERIPH_ID_UART0, 0xf, 0xf, -1, 0, 0, -1},
+ {PERIPH_ID_UART1, 0xf, 0xf, -1, 4, 4, -1},
+ {PERIPH_ID_UART2, 0xf, 0xf, -1, 8, 8, -1},
+ {PERIPH_ID_UART3, 0xf, 0xf, -1, 12, 12, -1},
+ {PERIPH_ID_I2C0, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C1, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C2, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C3, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C4, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C5, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C6, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_I2C7, -1, 0x7, 0x7, -1, 24, 0},
+ {PERIPH_ID_SPI0, 0xf, 0xf, 0xff, 16, 0, 8},
+ {PERIPH_ID_SPI1, 0xf, 0xf, 0xff, 20, 16, 24},
+ {PERIPH_ID_SPI2, 0xf, 0xf, 0xff, 24, 0, 8},
+ {PERIPH_ID_SDMMC0, 0xf, 0xf, 0xff, 0, 0, 8},
+ {PERIPH_ID_SDMMC1, 0xf, 0xf, 0xff, 4, 16, 24},
+ {PERIPH_ID_SDMMC2, 0xf, 0xf, 0xff, 8, 0, 8},
+ {PERIPH_ID_SDMMC3, 0xf, 0xf, 0xff, 12, 16, 24},
+ {PERIPH_ID_I2S0, 0xf, 0xf, 0xff, 0, 0, 4},
+ {PERIPH_ID_I2S1, 0xf, 0xf, 0xff, 4, 12, 16},
+ {PERIPH_ID_SPI3, 0xf, 0xf, 0xff, 0, 0, 4},
+ {PERIPH_ID_SPI4, 0xf, 0xf, 0xff, 4, 12, 16},
+ {PERIPH_ID_SDMMC4, 0xf, 0xf, 0xff, 16, 0, 8},
+ {PERIPH_ID_PWM0, 0xf, 0xf, -1, 24, 0, -1},
+ {PERIPH_ID_PWM1, 0xf, 0xf, -1, 24, 0, -1},
+ {PERIPH_ID_PWM2, 0xf, 0xf, -1, 24, 0, -1},
+ {PERIPH_ID_PWM3, 0xf, 0xf, -1, 24, 0, -1},
+ {PERIPH_ID_PWM4, 0xf, 0xf, -1, 24, 0, -1},
+
+ {PERIPH_ID_NONE, -1, -1, -1, -1, -1, -1},
+};
+
+static struct clk_bit_info exynos542x_bit_info[] = {
+ /* periph id s_mask d_mask p_mask s_bit d_bit p_bit */
+ {PERIPH_ID_UART0, 0xf, 0xf, -1, 4, 8, -1},
+ {PERIPH_ID_UART1, 0xf, 0xf, -1, 8, 12, -1},
+ {PERIPH_ID_UART2, 0xf, 0xf, -1, 12, 16, -1},
+ {PERIPH_ID_UART3, 0xf, 0xf, -1, 16, 20, -1},
+ {PERIPH_ID_I2C0, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C1, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C2, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C3, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C4, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C5, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C6, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C7, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_SPI0, 0xf, 0xf, 0xff, 20, 20, 8},
+ {PERIPH_ID_SPI1, 0xf, 0xf, 0xff, 24, 24, 16},
+ {PERIPH_ID_SPI2, 0xf, 0xf, 0xff, 28, 28, 24},
+ {PERIPH_ID_SDMMC0, 0x7, 0x3ff, -1, 8, 0, -1},
+ {PERIPH_ID_SDMMC1, 0x7, 0x3ff, -1, 12, 10, -1},
+ {PERIPH_ID_SDMMC2, 0x7, 0x3ff, -1, 16, 20, -1},
+ {PERIPH_ID_I2C8, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2C9, -1, 0x3f, -1, -1, 8, -1},
+ {PERIPH_ID_I2S0, 0xf, 0xf, 0xff, 0, 0, 4},
+ {PERIPH_ID_I2S1, 0xf, 0xf, 0xff, 4, 12, 16},
+ {PERIPH_ID_SPI3, 0xf, 0xf, 0xff, 12, 16, 0},
+ {PERIPH_ID_SPI4, 0xf, 0xf, 0xff, 16, 20, 8},
+ {PERIPH_ID_PWM0, 0xf, 0xf, -1, 24, 28, -1},
+ {PERIPH_ID_PWM1, 0xf, 0xf, -1, 24, 28, -1},
+ {PERIPH_ID_PWM2, 0xf, 0xf, -1, 24, 28, -1},
+ {PERIPH_ID_PWM3, 0xf, 0xf, -1, 24, 28, -1},
+ {PERIPH_ID_PWM4, 0xf, 0xf, -1, 24, 28, -1},
+ {PERIPH_ID_I2C10, -1, 0x3f, -1, -1, 8, -1},
+
+ {PERIPH_ID_NONE, -1, -1, -1, -1, -1, -1},
};
/* Epll Clock division values to achive different frequency output */
@@ -260,11 +302,72 @@ static unsigned long exynos5_get_pll_clk(int pllreg)
return fout;
}
+/* exynos542x: return pll clock frequency */
+static unsigned long exynos542x_get_pll_clk(int pllreg)
+{
+ struct exynos5420_clock *clk =
+ (struct exynos5420_clock *)samsung_get_base_clock();
+ unsigned long r, k = 0;
+
+ switch (pllreg) {
+ case APLL:
+ r = readl(&clk->apll_con0);
+ break;
+ case MPLL:
+ r = readl(&clk->mpll_con0);
+ break;
+ case EPLL:
+ r = readl(&clk->epll_con0);
+ k = readl(&clk->epll_con1);
+ break;
+ case VPLL:
+ r = readl(&clk->vpll_con0);
+ k = readl(&clk->vpll_con1);
+ break;
+ case BPLL:
+ r = readl(&clk->bpll_con0);
+ break;
+ case RPLL:
+ r = readl(&clk->rpll_con0);
+ k = readl(&clk->rpll_con1);
+ break;
+ case SPLL:
+ r = readl(&clk->spll_con0);
+ break;
+ default:
+ printf("Unsupported PLL (%d)\n", pllreg);
+ return 0;
+ }
+
+ return exynos_get_pll_clk(pllreg, r, k);
+}
+
+static struct clk_bit_info *get_clk_bit_info(int peripheral)
+{
+ int i;
+ struct clk_bit_info *info;
+
+ if (proid_is_exynos5420() || proid_is_exynos5800())
+ info = exynos542x_bit_info;
+ else
+ info = exynos5_bit_info;
+
+ for (i = 0; info[i].id != PERIPH_ID_NONE; i++) {
+ if (info[i].id == peripheral)
+ break;
+ }
+
+ if (info[i].id == PERIPH_ID_NONE)
+ debug("ERROR: Peripheral ID %d not found\n", peripheral);
+
+ return &info[i];
+}
+
static unsigned long exynos5_get_periph_rate(int peripheral)
{
- struct clk_bit_info *bit_info = &clk_bit_info[peripheral];
- unsigned long sclk, sub_clk;
- unsigned int src, div, sub_div;
+ struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
+ unsigned long sclk = 0;
+ unsigned int src = 0, div = 0, sub_div = 0;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
@@ -286,27 +389,30 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
break;
case PERIPH_ID_I2S0:
src = readl(&clk->src_mau);
- div = readl(&clk->div_mau);
+ div = sub_div = readl(&clk->div_mau);
case PERIPH_ID_SPI0:
case PERIPH_ID_SPI1:
src = readl(&clk->src_peric1);
- div = readl(&clk->div_peric1);
+ div = sub_div = readl(&clk->div_peric1);
break;
case PERIPH_ID_SPI2:
src = readl(&clk->src_peric1);
- div = readl(&clk->div_peric2);
+ div = sub_div = readl(&clk->div_peric2);
break;
case PERIPH_ID_SPI3:
case PERIPH_ID_SPI4:
src = readl(&clk->sclk_src_isp);
- div = readl(&clk->sclk_div_isp);
+ div = sub_div = readl(&clk->sclk_div_isp);
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC1:
+ src = readl(&clk->src_fsys);
+ div = sub_div = readl(&clk->div_fsys1);
+ break;
case PERIPH_ID_SDMMC2:
case PERIPH_ID_SDMMC3:
src = readl(&clk->src_fsys);
- div = readl(&clk->div_fsys1);
+ div = sub_div = readl(&clk->div_fsys2);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -316,18 +422,17 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
case PERIPH_ID_I2C5:
case PERIPH_ID_I2C6:
case PERIPH_ID_I2C7:
- sclk = exynos5_get_pll_clk(MPLL);
- sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
- & 0x7) + 1;
- div = ((readl(&clk->div_top0) >> bit_info->prediv_bit)
- & 0x7) + 1;
- return (sclk / sub_div) / div;
+ src = EXYNOS_SRC_MPLL;
+ div = readl(&clk->div_top0);
+ sub_div = readl(&clk->div_top1);
+ break;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return -1;
};
- src = (src >> bit_info->src_bit) & 0xf;
+ if (bit_info->src_bit >= 0)
+ src = (src >> bit_info->src_bit) & bit_info->src_mask;
switch (src) {
case EXYNOS_SRC_MPLL:
@@ -340,68 +445,126 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
sclk = exynos5_get_pll_clk(VPLL);
break;
default:
+ debug("%s: EXYNOS_SRC %d not supported\n", __func__, src);
return 0;
}
- /* Ratio clock division for this peripheral */
- sub_div = (div >> bit_info->div_bit) & 0xf;
- sub_clk = sclk / (sub_div + 1);
-
- /* Pre-ratio clock division for SDMMC0 and 2 */
- if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) {
- div = (div >> bit_info->prediv_bit) & 0xff;
- return sub_clk / (div + 1);
- }
+ /* Clock divider ratio for this peripheral */
+ if (bit_info->div_bit >= 0)
+ div = (div >> bit_info->div_bit) & bit_info->div_mask;
- return sub_clk;
-}
+ /* Clock pre-divider ratio for this peripheral */
+ if (bit_info->prediv_bit >= 0)
+ sub_div = (sub_div >> bit_info->prediv_bit)
+ & bit_info->prediv_mask;
-unsigned long clock_get_periph_rate(int peripheral)
-{
- if (cpu_is_exynos5())
- return exynos5_get_periph_rate(peripheral);
- else
- return 0;
+ /* Calculate and return required clock rate */
+ return (sclk / (div + 1)) / (sub_div + 1);
}
-/* exynos5420: return pll clock frequency */
-static unsigned long exynos5420_get_pll_clk(int pllreg)
+static unsigned long exynos542x_get_periph_rate(int peripheral)
{
+ struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
+ unsigned long sclk = 0;
+ unsigned int src = 0, div = 0, sub_div = 0;
struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long r, k = 0;
+ (struct exynos5420_clock *)samsung_get_base_clock();
- switch (pllreg) {
- case APLL:
- r = readl(&clk->apll_con0);
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ case PERIPH_ID_UART1:
+ case PERIPH_ID_UART2:
+ case PERIPH_ID_UART3:
+ case PERIPH_ID_PWM0:
+ case PERIPH_ID_PWM1:
+ case PERIPH_ID_PWM2:
+ case PERIPH_ID_PWM3:
+ case PERIPH_ID_PWM4:
+ src = readl(&clk->src_peric0);
+ div = readl(&clk->div_peric0);
break;
- case MPLL:
- r = readl(&clk->mpll_con0);
+ case PERIPH_ID_SPI0:
+ case PERIPH_ID_SPI1:
+ case PERIPH_ID_SPI2:
+ src = readl(&clk->src_peric1);
+ div = readl(&clk->div_peric1);
+ sub_div = readl(&clk->div_peric4);
break;
- case EPLL:
- r = readl(&clk->epll_con0);
- k = readl(&clk->epll_con1);
+ case PERIPH_ID_SPI3:
+ case PERIPH_ID_SPI4:
+ src = readl(&clk->src_isp);
+ div = readl(&clk->div_isp1);
+ sub_div = readl(&clk->div_isp1);
break;
- case VPLL:
- r = readl(&clk->vpll_con0);
- k = readl(&clk->vpll_con1);
+ case PERIPH_ID_SDMMC0:
+ case PERIPH_ID_SDMMC1:
+ case PERIPH_ID_SDMMC2:
+ case PERIPH_ID_SDMMC3:
+ src = readl(&clk->src_fsys);
+ div = readl(&clk->div_fsys1);
break;
- case BPLL:
- r = readl(&clk->bpll_con0);
+ case PERIPH_ID_I2C0:
+ case PERIPH_ID_I2C1:
+ case PERIPH_ID_I2C2:
+ case PERIPH_ID_I2C3:
+ case PERIPH_ID_I2C4:
+ case PERIPH_ID_I2C5:
+ case PERIPH_ID_I2C6:
+ case PERIPH_ID_I2C7:
+ case PERIPH_ID_I2C8:
+ case PERIPH_ID_I2C9:
+ case PERIPH_ID_I2C10:
+ src = EXYNOS542X_SRC_MPLL;
+ div = readl(&clk->div_top1);
break;
- case RPLL:
- r = readl(&clk->rpll_con0);
- k = readl(&clk->rpll_con1);
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return -1;
+ };
+
+ if (bit_info->src_bit >= 0)
+ src = (src >> bit_info->src_bit) & bit_info->src_mask;
+
+ switch (src) {
+ case EXYNOS542X_SRC_MPLL:
+ sclk = exynos542x_get_pll_clk(MPLL);
break;
- case SPLL:
- r = readl(&clk->spll_con0);
+ case EXYNOS542X_SRC_SPLL:
+ sclk = exynos542x_get_pll_clk(SPLL);
+ break;
+ case EXYNOS542X_SRC_EPLL:
+ sclk = exynos542x_get_pll_clk(EPLL);
+ break;
+ case EXYNOS542X_SRC_RPLL:
+ sclk = exynos542x_get_pll_clk(RPLL);
break;
default:
- printf("Unsupported PLL (%d)\n", pllreg);
+ debug("%s: EXYNOS542X_SRC %d not supported", __func__, src);
return 0;
}
- return exynos_get_pll_clk(pllreg, r, k);
+ /* Clock divider ratio for this peripheral */
+ if (bit_info->div_bit >= 0)
+ div = (div >> bit_info->div_bit) & bit_info->div_mask;
+
+ /* Clock pre-divider ratio for this peripheral */
+ if (bit_info->prediv_bit >= 0)
+ sub_div = (sub_div >> bit_info->prediv_bit)
+ & bit_info->prediv_mask;
+
+ /* Calculate and return required clock rate */
+ return (sclk / (div + 1)) / (sub_div + 1);
+}
+
+unsigned long clock_get_periph_rate(int peripheral)
+{
+ if (cpu_is_exynos5()) {
+ if (proid_is_exynos5420() || proid_is_exynos5800())
+ return exynos542x_get_periph_rate(peripheral);
+ return exynos5_get_periph_rate(peripheral);
+ } else {
+ return 0;
+ }
}
/* exynos4: return ARM clock frequency */
@@ -527,27 +690,6 @@ static unsigned long exynos4x12_get_pwm_clk(void)
return pclk;
}
-/* exynos5420: return pwm clock frequency */
-static unsigned long exynos5420_get_pwm_clk(void)
-{
- struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long pclk, sclk;
- unsigned int ratio;
-
- /*
- * CLK_DIV_PERIC0
- * PWM_RATIO [31:28]
- */
- ratio = readl(&clk->div_peric0);
- ratio = (ratio >> 28) & 0xf;
- sclk = get_pll_clk(MPLL);
-
- pclk = sclk / (ratio + 1);
-
- return pclk;
-}
-
/* exynos4: return uart clock frequency */
static unsigned long exynos4_get_uart_clk(int dev_index)
{
@@ -640,100 +782,6 @@ static unsigned long exynos4x12_get_uart_clk(int dev_index)
return uclk;
}
-/* exynos5: return uart clock frequency */
-static unsigned long exynos5_get_uart_clk(int dev_index)
-{
- struct exynos5_clock *clk =
- (struct exynos5_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel;
- unsigned int ratio;
-
- /*
- * CLK_SRC_PERIC0
- * UART0_SEL [3:0]
- * UART1_SEL [7:4]
- * UART2_SEL [8:11]
- * UART3_SEL [12:15]
- * UART4_SEL [16:19]
- * UART5_SEL [23:20]
- */
- sel = readl(&clk->src_peric0);
- sel = (sel >> (dev_index << 2)) & 0xf;
-
- if (sel == 0x6)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x7)
- sclk = get_pll_clk(EPLL);
- else if (sel == 0x8)
- sclk = get_pll_clk(VPLL);
- else
- return 0;
-
- /*
- * CLK_DIV_PERIC0
- * UART0_RATIO [3:0]
- * UART1_RATIO [7:4]
- * UART2_RATIO [8:11]
- * UART3_RATIO [12:15]
- * UART4_RATIO [16:19]
- * UART5_RATIO [23:20]
- */
- ratio = readl(&clk->div_peric0);
- ratio = (ratio >> (dev_index << 2)) & 0xf;
-
- uclk = sclk / (ratio + 1);
-
- return uclk;
-}
-
-/* exynos5420: return uart clock frequency */
-static unsigned long exynos5420_get_uart_clk(int dev_index)
-{
- struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel;
- unsigned int ratio;
-
- /*
- * CLK_SRC_PERIC0
- * UART0_SEL [6:4]
- * UART1_SEL [10:8]
- * UART2_SEL [14:12]
- * UART3_SEL [18:16]
- * generalised calculation as follows
- * sel = (sel >> ((dev_index * 4) + 4)) & mask;
- */
- sel = readl(&clk->src_peric0);
- sel = (sel >> ((dev_index * 4) + 4)) & 0x7;
-
- if (sel == 0x3)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x6)
- sclk = get_pll_clk(EPLL);
- else if (sel == 0x7)
- sclk = get_pll_clk(RPLL);
- else
- return 0;
-
- /*
- * CLK_DIV_PERIC0
- * UART0_RATIO [11:8]
- * UART1_RATIO [15:12]
- * UART2_RATIO [19:16]
- * UART3_RATIO [23:20]
- * generalised calculation as follows
- * ratio = (ratio >> ((dev_index * 4) + 8)) & mask;
- */
- ratio = readl(&clk->div_peric0);
- ratio = (ratio >> ((dev_index * 4) + 8)) & 0xf;
-
- uclk = sclk / (ratio + 1);
-
- return uclk;
-}
-
static unsigned long exynos4_get_mmc_clk(int dev_index)
{
struct exynos4_clock *clk =
@@ -783,94 +831,6 @@ static unsigned long exynos4_get_mmc_clk(int dev_index)
return uclk;
}
-static unsigned long exynos5_get_mmc_clk(int dev_index)
-{
- struct exynos5_clock *clk =
- (struct exynos5_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel, ratio, pre_ratio;
- int shift = 0;
-
- sel = readl(&clk->src_fsys);
- sel = (sel >> (dev_index << 2)) & 0xf;
-
- if (sel == 0x6)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x7)
- sclk = get_pll_clk(EPLL);
- else if (sel == 0x8)
- sclk = get_pll_clk(VPLL);
- else
- return 0;
-
- switch (dev_index) {
- case 0:
- case 1:
- ratio = readl(&clk->div_fsys1);
- pre_ratio = readl(&clk->div_fsys1);
- break;
- case 2:
- case 3:
- ratio = readl(&clk->div_fsys2);
- pre_ratio = readl(&clk->div_fsys2);
- break;
- default:
- return 0;
- }
-
- if (dev_index == 1 || dev_index == 3)
- shift = 16;
-
- ratio = (ratio >> shift) & 0xf;
- pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
- uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
-
- return uclk;
-}
-
-static unsigned long exynos5420_get_mmc_clk(int dev_index)
-{
- struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel, ratio;
-
- /*
- * CLK_SRC_FSYS
- * MMC0_SEL [10:8]
- * MMC1_SEL [14:12]
- * MMC2_SEL [18:16]
- * generalised calculation as follows
- * sel = (sel >> ((dev_index * 4) + 8)) & mask
- */
- sel = readl(&clk->src_fsys);
- sel = (sel >> ((dev_index * 4) + 8)) & 0x7;
-
- if (sel == 0x3)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x4)
- sclk = get_pll_clk(SPLL);
- else if (sel == 0x6)
- sclk = get_pll_clk(EPLL);
- else
- return 0;
-
- /*
- * CLK_DIV_FSYS1
- * MMC0_RATIO [9:0]
- * MMC1_RATIO [19:10]
- * MMC2_RATIO [29:20]
- * generalised calculation as follows
- * ratio = (ratio >> (dev_index * 10)) & mask
- */
- ratio = readl(&clk->div_fsys1);
- ratio = (ratio >> (dev_index * 10)) & 0x3ff;
-
- uclk = (sclk / (ratio + 1));
-
- return uclk;
-}
-
/* exynos4: set the mmc clock */
static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
@@ -1249,29 +1209,6 @@ void exynos4_set_mipi_clk(void)
clrsetbits_le32(&clk->div_lcd0, 0xf << 16, 0x1 << 16);
}
-/*
- * I2C
- *
- * exynos5: obtaining the I2C clock
- */
-static unsigned long exynos5_get_i2c_clk(void)
-{
- struct exynos5_clock *clk =
- (struct exynos5_clock *)samsung_get_base_clock();
- unsigned long aclk_66, aclk_66_pre, sclk;
- unsigned int ratio;
-
- sclk = get_pll_clk(MPLL);
-
- ratio = (readl(&clk->div_top1)) >> 24;
- ratio &= 0x7;
- aclk_66_pre = sclk / (ratio + 1);
- ratio = readl(&clk->div_top0);
- ratio &= 0x7;
- aclk_66 = aclk_66_pre / (ratio + 1);
- return aclk_66;
-}
-
int exynos5_set_epll_clk(unsigned long rate)
{
unsigned int epll_con, epll_con_k;
@@ -1585,7 +1522,7 @@ unsigned long get_pll_clk(int pllreg)
{
if (cpu_is_exynos5()) {
if (proid_is_exynos5420() || proid_is_exynos5800())
- return exynos5420_get_pll_clk(pllreg);
+ return exynos542x_get_pll_clk(pllreg);
return exynos5_get_pll_clk(pllreg);
} else {
if (proid_is_exynos4412())
@@ -1608,7 +1545,7 @@ unsigned long get_arm_clk(void)
unsigned long get_i2c_clk(void)
{
if (cpu_is_exynos5()) {
- return exynos5_get_i2c_clk();
+ return clock_get_periph_rate(PERIPH_ID_I2C0);
} else if (cpu_is_exynos4()) {
return exynos4_get_i2c_clk();
} else {
@@ -1620,8 +1557,6 @@ unsigned long get_i2c_clk(void)
unsigned long get_pwm_clk(void)
{
if (cpu_is_exynos5()) {
- if (proid_is_exynos5420() || proid_is_exynos5800())
- return exynos5420_get_pwm_clk();
return clock_get_periph_rate(PERIPH_ID_PWM0);
} else {
if (proid_is_exynos4412())
@@ -1632,10 +1567,28 @@ unsigned long get_pwm_clk(void)
unsigned long get_uart_clk(int dev_index)
{
+ enum periph_id id;
+
+ switch (dev_index) {
+ case 0:
+ id = PERIPH_ID_UART0;
+ break;
+ case 1:
+ id = PERIPH_ID_UART1;
+ break;
+ case 2:
+ id = PERIPH_ID_UART2;
+ break;
+ case 3:
+ id = PERIPH_ID_UART3;
+ break;
+ default:
+ debug("%s: invalid UART index %d", __func__, dev_index);
+ return -1;
+ }
+
if (cpu_is_exynos5()) {
- if (proid_is_exynos5420() || proid_is_exynos5800())
- return exynos5420_get_uart_clk(dev_index);
- return exynos5_get_uart_clk(dev_index);
+ return clock_get_periph_rate(id);
} else {
if (proid_is_exynos4412())
return exynos4x12_get_uart_clk(dev_index);
@@ -1645,10 +1598,28 @@ unsigned long get_uart_clk(int dev_index)
unsigned long get_mmc_clk(int dev_index)
{
+ enum periph_id id;
+
+ switch (dev_index) {
+ case 0:
+ id = PERIPH_ID_SDMMC0;
+ break;
+ case 1:
+ id = PERIPH_ID_SDMMC1;
+ break;
+ case 2:
+ id = PERIPH_ID_SDMMC2;
+ break;
+ case 3:
+ id = PERIPH_ID_SDMMC3;
+ break;
+ default:
+ debug("%s: invalid MMC index %d", __func__, dev_index);
+ return -1;
+ }
+
if (cpu_is_exynos5()) {
- if (proid_is_exynos5420() || proid_is_exynos5800())
- return exynos5420_get_mmc_clk(dev_index);
- return exynos5_get_mmc_clk(dev_index);
+ return clock_get_periph_rate(id);
} else {
return exynos4_get_mmc_clk(dev_index);
}
@@ -1656,6 +1627,10 @@ unsigned long get_mmc_clk(int dev_index)
void set_mmc_clk(int dev_index, unsigned int div)
{
+ /* If want to set correct value, it needs to substract one from div.*/
+ if (div > 0)
+ div -= 1;
+
if (cpu_is_exynos5()) {
if (proid_is_exynos5420() || proid_is_exynos5800())
exynos5420_set_mmc_clk(dev_index, div);
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 1520d64..1b12051 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -102,10 +102,34 @@ static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable)
}
}
+static void exynos5420_set_usbdev_phy_ctrl(unsigned int enable)
+{
+ struct exynos5420_power *power =
+ (struct exynos5420_power *)samsung_get_base_power();
+
+ if (enable) {
+ /* Enabling USBDEV_PHY */
+ setbits_le32(&power->usbdev_phy_control,
+ POWER_USB_DRD_PHY_CTRL_EN);
+ setbits_le32(&power->usbdev1_phy_control,
+ POWER_USB_DRD_PHY_CTRL_EN);
+ } else {
+ /* Disabling USBDEV_PHY */
+ clrbits_le32(&power->usbdev_phy_control,
+ POWER_USB_DRD_PHY_CTRL_EN);
+ clrbits_le32(&power->usbdev1_phy_control,
+ POWER_USB_DRD_PHY_CTRL_EN);
+ }
+}
+
void set_usbdrd_phy_ctrl(unsigned int enable)
{
- if (cpu_is_exynos5())
- exynos5_set_usbdrd_phy_ctrl(enable);
+ if (cpu_is_exynos5()) {
+ if (proid_is_exynos5420() || proid_is_exynos5800())
+ exynos5420_set_usbdev_phy_ctrl(enable);
+ else
+ exynos5_set_usbdrd_phy_ctrl(enable);
+ }
}
static void exynos5_dp_phy_control(unsigned int enable)
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
index bc237c9..c7f943e 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -309,4 +309,3 @@ void board_init_r(gd_t *id, ulong dest_addr)
while (1)
;
}
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index ce2d92f..1a640bb 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -8,14 +8,214 @@
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
+#include <asm/cache.h>
+#include <asm/system.h>
#include <tsec.h>
#include <netdev.h>
#include <fsl_esdhc.h>
#include "fsl_epu.h"
+#define DCSR_RCPM2_BLOCK_OFFSET 0x223000
+#define DCSR_RCPM2_CPMFSMCR0 0x400
+#define DCSR_RCPM2_CPMFSMSR0 0x404
+#define DCSR_RCPM2_CPMFSMCR1 0x414
+#define DCSR_RCPM2_CPMFSMSR1 0x418
+#define CPMFSMSR_FSM_STATE_MASK 0x7f
+
DECLARE_GLOBAL_DATA_PTR;
+#ifndef CONFIG_SYS_DCACHE_OFF
+
+/*
+ * Bit[1] of the descriptor indicates the descriptor type,
+ * and bit[0] indicates whether the descriptor is valid.
+ */
+#define PMD_TYPE_TABLE 0x3
+#define PMD_TYPE_SECT 0x1
+
+/* AttrIndx[2:0] */
+#define PMD_ATTRINDX(t) ((t) << 2)
+
+/* Section */
+#define PMD_SECT_AF (1 << 10)
+
+#define BLOCK_SIZE_L1 (1UL << 30)
+#define BLOCK_SIZE_L2 (1UL << 21)
+
+/* TTBCR flags */
+#define TTBCR_EAE (1 << 31)
+#define TTBCR_T0SZ(x) ((x) << 0)
+#define TTBCR_T1SZ(x) ((x) << 16)
+#define TTBCR_USING_TTBR0 (TTBCR_T0SZ(0) | TTBCR_T1SZ(0))
+#define TTBCR_IRGN0_NC (0 << 8)
+#define TTBCR_IRGN0_WBWA (1 << 8)
+#define TTBCR_IRGN0_WT (2 << 8)
+#define TTBCR_IRGN0_WBNWA (3 << 8)
+#define TTBCR_IRGN0_MASK (3 << 8)
+#define TTBCR_ORGN0_NC (0 << 10)
+#define TTBCR_ORGN0_WBWA (1 << 10)
+#define TTBCR_ORGN0_WT (2 << 10)
+#define TTBCR_ORGN0_WBNWA (3 << 10)
+#define TTBCR_ORGN0_MASK (3 << 10)
+#define TTBCR_SHARED_NON (0 << 12)
+#define TTBCR_SHARED_OUTER (2 << 12)
+#define TTBCR_SHARED_INNER (3 << 12)
+#define TTBCR_EPD0 (0 << 7)
+#define TTBCR (TTBCR_SHARED_NON | \
+ TTBCR_ORGN0_NC | \
+ TTBCR_IRGN0_NC | \
+ TTBCR_USING_TTBR0 | \
+ TTBCR_EAE)
+
+/*
+ * Memory region attributes for LPAE (defined in pgtable):
+ *
+ * n = AttrIndx[2:0]
+ *
+ * n MAIR
+ * UNCACHED 000 00000000
+ * BUFFERABLE 001 01000100
+ * DEV_WC 001 01000100
+ * WRITETHROUGH 010 10101010
+ * WRITEBACK 011 11101110
+ * DEV_CACHED 011 11101110
+ * DEV_SHARED 100 00000100
+ * DEV_NONSHARED 100 00000100
+ * unused 101
+ * unused 110
+ * WRITEALLOC 111 11111111
+ */
+#define MT_MAIR0 0xeeaa4400
+#define MT_MAIR1 0xff000004
+#define MT_STRONLY_ORDER 0
+#define MT_NORMAL_NC 1
+#define MT_DEVICE_MEM 4
+#define MT_NORMAL 7
+
+/* The phy_addr must be aligned to 4KB */
+static inline void set_pgtable(u32 *page_table, u32 index, u32 phy_addr)
+{
+ u32 value = phy_addr | PMD_TYPE_TABLE;
+
+ page_table[2 * index] = value;
+ page_table[2 * index + 1] = 0;
+}
+
+/* The phy_addr must be aligned to 4KB */
+static inline void set_pgsection(u32 *page_table, u32 index, u64 phy_addr,
+ u32 memory_type)
+{
+ u64 value;
+
+ value = phy_addr | PMD_TYPE_SECT | PMD_SECT_AF;
+ value |= PMD_ATTRINDX(memory_type);
+ page_table[2 * index] = value & 0xFFFFFFFF;
+ page_table[2 * index + 1] = (value >> 32) & 0xFFFFFFFF;
+}
+
+/*
+ * Start MMU after DDR is available, we create MMU table in DRAM.
+ * The base address of TTLB is gd->arch.tlb_addr. We use two
+ * levels of translation tables here to cover 40-bit address space.
+ *
+ * The TTLBs are located at PHY 2G~4G.
+ *
+ * VA mapping:
+ *
+ * ------- <---- 0GB
+ * | |
+ * | |
+ * |-------| <---- 0x24000000
+ * |///////| ===> 192MB VA map for PCIe1 with offset 0x40_0000_0000
+ * |-------| <---- 0x300000000
+ * | |
+ * |-------| <---- 0x34000000
+ * |///////| ===> 192MB VA map for PCIe2 with offset 0x48_0000_0000
+ * |-------| <---- 0x40000000
+ * | |
+ * |-------| <---- 0x80000000 DDR0 space start
+ * |\\\\\\\|
+ *.|\\\\\\\| ===> 2GB VA map for 2GB DDR0 Memory space
+ * |\\\\\\\|
+ * ------- <---- 4GB DDR0 space end
+ */
+static void mmu_setup(void)
+{
+ u32 *level0_table = (u32 *)gd->arch.tlb_addr;
+ u32 *level1_table = (u32 *)(gd->arch.tlb_addr + 0x1000);
+ u64 va_start = 0;
+ u32 reg;
+ int i;
+
+ /* Level 0 Table 2-3 are used to map DDR */
+ set_pgsection(level0_table, 3, 3 * BLOCK_SIZE_L1, MT_NORMAL);
+ set_pgsection(level0_table, 2, 2 * BLOCK_SIZE_L1, MT_NORMAL);
+ /* Level 0 Table 1 is used to map device */
+ set_pgsection(level0_table, 1, 1 * BLOCK_SIZE_L1, MT_DEVICE_MEM);
+ /* Level 0 Table 0 is used to map device including PCIe MEM */
+ set_pgtable(level0_table, 0, (u32)level1_table);
+
+ /* Level 1 has 512 entries */
+ for (i = 0; i < 512; i++) {
+ /* Mapping for PCIe 1 */
+ if (va_start >= CONFIG_SYS_PCIE1_VIRT_ADDR &&
+ va_start < (CONFIG_SYS_PCIE1_VIRT_ADDR +
+ CONFIG_SYS_PCIE_MMAP_SIZE))
+ set_pgsection(level1_table, i,
+ CONFIG_SYS_PCIE1_PHYS_BASE + va_start,
+ MT_DEVICE_MEM);
+ /* Mapping for PCIe 2 */
+ else if (va_start >= CONFIG_SYS_PCIE2_VIRT_ADDR &&
+ va_start < (CONFIG_SYS_PCIE2_VIRT_ADDR +
+ CONFIG_SYS_PCIE_MMAP_SIZE))
+ set_pgsection(level1_table, i,
+ CONFIG_SYS_PCIE2_PHYS_BASE + va_start,
+ MT_DEVICE_MEM);
+ else
+ set_pgsection(level1_table, i,
+ va_start,
+ MT_DEVICE_MEM);
+ va_start += BLOCK_SIZE_L2;
+ }
+
+ asm volatile("dsb sy;isb");
+ asm volatile("mcr p15, 0, %0, c2, c0, 2" /* Write RT to TTBCR */
+ : : "r" (TTBCR) : "memory");
+ asm volatile("mcrr p15, 0, %0, %1, c2" /* TTBR 0 */
+ : : "r" ((u32)level0_table), "r" (0) : "memory");
+ asm volatile("mcr p15, 0, %0, c10, c2, 0" /* write MAIR 0 */
+ : : "r" (MT_MAIR0) : "memory");
+ asm volatile("mcr p15, 0, %0, c10, c2, 1" /* write MAIR 1 */
+ : : "r" (MT_MAIR1) : "memory");
+
+ /* Set the access control to all-supervisor */
+ asm volatile("mcr p15, 0, %0, c3, c0, 0"
+ : : "r" (~0));
+
+ /* Enable the mmu */
+ reg = get_cr();
+ set_cr(reg | CR_M);
+}
+
+/*
+ * This function is called from lib/board.c. It recreates MMU
+ * table in main memory. MMU and i/d-cache are enabled here.
+ */
+void enable_caches(void)
+{
+ /* Invalidate all TLB */
+ mmu_page_table_flush(gd->arch.tlb_addr,
+ gd->arch.tlb_addr + gd->arch.tlb_size);
+ /* Set up and enable mmu */
+ mmu_setup();
+
+ /* Invalidate & Enable d-cache */
+ invalidate_dcache_all();
+ set_cr(get_cr() | CR_C);
+}
+#endif /* #ifndef CONFIG_SYS_DCACHE_OFF */
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
@@ -78,16 +278,6 @@ int print_cpuinfo(void)
}
#endif
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_ICACHE_OFF
- icache_enable();
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
- dcache_enable();
-#endif
-}
-
#ifdef CONFIG_FSL_ESDHC
int cpu_mmc_init(bd_t *bis)
{
@@ -107,6 +297,27 @@ int cpu_eth_init(bd_t *bis)
int arch_cpu_init(void)
{
void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+ void *rcpm2_base =
+ (void *)(CONFIG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET);
+ u32 state;
+
+ /*
+ * The RCPM FSM state may not be reset after power-on.
+ * So, reset them.
+ */
+ state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR0) &
+ CPMFSMSR_FSM_STATE_MASK;
+ if (state != 0) {
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x80);
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x0);
+ }
+
+ state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR1) &
+ CPMFSMSR_FSM_STATE_MASK;
+ if (state != 0) {
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x80);
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x0);
+ }
/*
* After wakeup from deep sleep, Clear EPU registers
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index e601ba1..c01a98f 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -252,6 +252,8 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
/*
* Set SDRAM_CONFIG and PHY control registers to locked frequency
* and RL =7. As the default values of the Mode Registers are not
@@ -265,7 +267,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
writel(regs->sdram_tim2, &emif->emif_sdram_tim_2);
writel(regs->sdram_tim3, &emif->emif_sdram_tim_3);
- writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
/*
@@ -274,6 +275,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
*/
if (is_dra7xx()) {
do_ext_phy_settings(base, regs);
+ writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl);
writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
writel(regs->sdram_config_init, &emif->emif_sdram_config);
} else {
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 86c0e42..e19c7ae 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -19,7 +19,7 @@
ENTRY(save_boot_params)
ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
str r0, [r1]
- bx lr
+ b save_boot_params_ret
ENDPROC(save_boot_params)
ENTRY(set_pl310_ctrl_reg)
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index a029379..4a0ac2c 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -93,6 +93,21 @@ config TARGET_TWISTER
endchoice
+config DM
+ default y
+
+config DM_GPIO
+ default y if DM
+
+config DM_SERIAL
+ default y if DM
+
+config SYS_MALLOC_F
+ default y if DM
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if DM
+
config SYS_SOC
default "omap3"
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 78577b1..80cb263 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -23,7 +23,7 @@ ENTRY(save_boot_params)
ldr r5, [r0, #0x4]
and r5, r5, #0xff
str r5, [r4]
- bx lr
+ b save_boot_params_ret
ENDPROC(save_boot_params)
#endif
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 7d8cec0..5f8daa1 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -141,7 +141,8 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
.sdram_config_init = 0x61851ab2,
.sdram_config = 0x61851ab2,
.sdram_config2 = 0x08000000,
- .ref_ctrl = 0x00001035,
+ .ref_ctrl = 0x000040F1,
+ .ref_ctrl_final = 0x00001035,
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
.sdram_tim3 = 0x027F88A8,
@@ -151,10 +152,10 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
.emif_ddr_phy_ctlr_1_init = 0x0E24400A,
.emif_ddr_phy_ctlr_1 = 0x0E24400A,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB,
- .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB,
- .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB,
- .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00910091,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00950095,
+ .emif_ddr_ext_phy_ctrl_4 = 0x009B009B,
+ .emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
@@ -165,7 +166,8 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
.sdram_config_init = 0x61851B32,
.sdram_config = 0x61851B32,
.sdram_config2 = 0x08000000,
- .ref_ctrl = 0x00001035,
+ .ref_ctrl = 0x000040F1,
+ .ref_ctrl_final = 0x00001035,
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
.sdram_tim3 = 0x027F88A8,
@@ -175,10 +177,10 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
.emif_ddr_phy_ctlr_1_init = 0x0E24400A,
.emif_ddr_phy_ctlr_1 = 0x0E24400A,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB,
- .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB,
- .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB,
- .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00910091,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00950095,
+ .emif_ddr_ext_phy_ctrl_4 = 0x009B009B,
+ .emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
@@ -186,18 +188,19 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
};
const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
- .sdram_config_init = 0x61851AB2,
- .sdram_config = 0x61851AB2,
+ .sdram_config_init = 0x61862B32,
+ .sdram_config = 0x61862B32,
.sdram_config2 = 0x08000000,
- .ref_ctrl = 0x00001035,
- .sdram_tim1 = 0xCCCF36B3,
- .sdram_tim2 = 0x308F7FDA,
- .sdram_tim3 = 0x027F88A8,
+ .ref_ctrl = 0x0000493E,
+ .ref_ctrl_final = 0x0000144A,
+ .sdram_tim1 = 0xD113781C,
+ .sdram_tim2 = 0x308F7FE3,
+ .sdram_tim3 = 0x009F86A8,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400A,
- .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_phy_ctlr_1_init = 0x0E24400D,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400D,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
.emif_ddr_ext_phy_ctrl_2 = 0x00A400A4,
.emif_ddr_ext_phy_ctrl_3 = 0x00A900A9,
@@ -420,22 +423,22 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {
const u32
dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
- 0x00BB00BB,
- 0x00440044,
- 0x00440044,
- 0x00440044,
- 0x00440044,
- 0x00440044,
+ 0x00980098,
+ 0x00340034,
+ 0x00350035,
+ 0x00340034,
+ 0x00310031,
+ 0x00340034,
0x007F007F,
0x007F007F,
0x007F007F,
0x007F007F,
0x007F007F,
- 0x00600060,
- 0x00600060,
- 0x00600060,
- 0x00600060,
- 0x00600060,
+ 0x00480048,
+ 0x004A004A,
+ 0x00520052,
+ 0x00550055,
+ 0x00500050,
0x00000000,
0x00600020,
0x40010080,
@@ -449,22 +452,22 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
const u32
dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
- 0x00BB00BB,
- 0x00440044,
- 0x00440044,
- 0x00440044,
- 0x00440044,
- 0x00440044,
+ 0x00980098,
+ 0x00330033,
+ 0x00330033,
+ 0x002F002F,
+ 0x00320032,
+ 0x00310031,
0x007F007F,
0x007F007F,
0x007F007F,
0x007F007F,
0x007F007F,
- 0x00600060,
- 0x00600060,
- 0x00600060,
- 0x00600060,
- 0x00600060,
+ 0x00520052,
+ 0x00520052,
+ 0x00470047,
+ 0x00490049,
+ 0x00500050,
0x00000000,
0x00600020,
0x40010080,
diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig
index 6d94199..3586650 100644
--- a/arch/arm/cpu/armv7/rmobile/Kconfig
+++ b/arch/arm/cpu/armv7/rmobile/Kconfig
@@ -21,6 +21,9 @@ config TARGET_KZM9G
config TARGET_ALT
bool "Alt board"
+config TARGET_SILK
+ bool "Silk board"
+
endchoice
config SYS_SOC
@@ -28,7 +31,7 @@ config SYS_SOC
config RMOBILE_EXTRAM_BOOT
bool "Enable boot from RAM"
- depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER
+ depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_SILK
default n
source "board/atmark-techno/armadillo-800eva/Kconfig"
@@ -37,5 +40,6 @@ source "board/renesas/koelsch/Kconfig"
source "board/renesas/lager/Kconfig"
source "board/kmc/kzm9g/Kconfig"
source "board/renesas/alt/Kconfig"
+source "board/renesas/silk/Kconfig"
endif
diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
index d47546a..a5dbbea 100644
--- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
@@ -40,7 +40,7 @@ do_lowlevel_init:
and r1, r1, #0x7F00
lsrs r1, r1, #8
cmp r1, #0x4C /* 0x4C is ID of r8a7794 */
- beq _exit_init_l2_a15
+ beq _enable_actlr_smp
/* surpress wfe if ca15 */
tst r4, #4
@@ -64,6 +64,16 @@ do_lowlevel_init:
orrne r0, r0, #0x20 /* L2CTLR[5] */
#endif
mcrne p15, 1, r0, c9, c0, 2
+
+ b _exit_init_l2_a15
+
+_enable_actlr_smp: /* R8A7794 only (CA7) */
+#ifndef CONFIG_DCACHE_OFF
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #0x40
+ mcr p15, 0, r0, c1, c0, 1
+#endif
+
_exit_init_l2_a15:
ldr r3, =(CONFIG_SYS_INIT_SP_ADDR)
sub sp, r3, #4
diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig
index 6288134..bc73813 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/Kconfig
+++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig
@@ -5,11 +5,11 @@ choice
config TARGET_S5P_GONI
bool "S5P Goni board"
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
config TARGET_SMDKC100
bool "Support smdkc100 board"
- select OF_CONTROL if !SPL_BUILD
+ select OF_CONTROL
endchoice
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 70048c1..9b49ece 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -31,9 +31,12 @@
*************************************************************************/
.globl reset
+ .globl save_boot_params_ret
reset:
- bl save_boot_params
+ /* Allow the board to save important registers */
+ b save_boot_params
+save_boot_params_ret:
/*
* disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode,
* except if in HYP mode already
@@ -96,7 +99,7 @@ ENDPROC(c_runtime_cpu_setup)
*
*************************************************************************/
ENTRY(save_boot_params)
- bx lr @ back to my caller
+ b save_boot_params_ret @ back to my caller
ENDPROC(save_boot_params)
.weak save_boot_params
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 48db744..4bb12ad 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -11,6 +11,7 @@ obj-y += timer.o
obj-y += board.o
obj-y += clock.o
obj-y += cpu_info.o
+obj-y += dram_helpers.o
obj-y += pinmux.o
obj-y += usbc.o
obj-$(CONFIG_MACH_SUN6I) += prcm.o
@@ -38,7 +39,5 @@ obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I) += dram_sun8i.o
-ifdef CONFIG_SPL_FEL
-obj-y += start.o
-endif
+obj-y += fel_utils.o
endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 6e28bcd..c02c015 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -27,6 +27,17 @@
#include <linux/compiler.h>
+struct fel_stash {
+ uint32_t sp;
+ uint32_t lr;
+ uint32_t cpsr;
+ uint32_t sctlr;
+ uint32_t vbar;
+ uint32_t cr;
+};
+
+struct fel_stash fel_stash __attribute__((section(".data")));
+
static int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
@@ -65,6 +76,12 @@ static int gpio_init(void)
return 0;
}
+void spl_board_load_image(void)
+{
+ debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
+ return_to_fel(fel_stash.sp, fel_stash.lr);
+}
+
void s_init(void)
{
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
@@ -95,7 +112,34 @@ void s_init(void)
*/
u32 spl_boot_device(void)
{
- return BOOT_DEVICE_MMC1;
+#ifdef CONFIG_SPL_FEL
+ /*
+ * This is the legacy compile time configuration for a special FEL
+ * enabled build. It has many restrictions and can only boot over USB.
+ */
+ return BOOT_DEVICE_BOARD;
+#else
+ /*
+ * When booting from the SD card, the "eGON.BT0" signature is expected
+ * to be found in memory at the address 0x0004 (see the "mksunxiboot"
+ * tool, which generates this header).
+ *
+ * When booting in the FEL mode over USB, this signature is patched in
+ * memory and replaced with something else by the 'fel' tool. This other
+ * signature is selected in such a way, that it can't be present in a
+ * valid bootable SD card image (because the BROM would refuse to
+ * execute the SPL in this case).
+ *
+ * This branch is just making a decision at runtime whether to load
+ * the main u-boot binary from the SD card (if the "eGON.BT0" signature
+ * is found) or return to the FEL code in the BROM to wait and receive
+ * the main u-boot binary over USB.
+ */
+ if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */
+ return BOOT_DEVICE_MMC1;
+ else
+ return BOOT_DEVICE_BOARD;
+#endif
}
/* No confirmation data available in SPL yet. Hardcode bootmode */
diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk
index 00f5ffc..76ffec9 100644
--- a/arch/arm/cpu/armv7/sunxi/config.mk
+++ b/arch/arm/cpu/armv7/sunxi/config.mk
@@ -1,8 +1,6 @@
# Build a combined spl + u-boot image
ifdef CONFIG_SPL
ifndef CONFIG_SPL_BUILD
-ifndef CONFIG_SPL_FEL
ALL-y += u-boot-sunxi-with-spl.bin
endif
endif
-endif
diff --git a/arch/arm/cpu/armv7/sunxi/dram_helpers.c b/arch/arm/cpu/armv7/sunxi/dram_helpers.c
new file mode 100644
index 0000000..9a94e1b
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/dram_helpers.c
@@ -0,0 +1,37 @@
+/*
+ * DRAM init helper functions
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/dram.h>
+
+/*
+ * Wait up to 1s for value to be set in given part of reg.
+ */
+void mctl_await_completion(u32 *reg, u32 mask, u32 val)
+{
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ while ((readl(reg) & mask) != val) {
+ if (timer_get_us() > tmo)
+ panic("Timeout initialising DRAM\n");
+ }
+}
+
+/*
+ * Test if memory at offset offset matches memory at begin of DRAM
+ */
+bool mctl_mem_matches(u32 offset)
+{
+ /* Try to write different values to RAM at two addresses */
+ writel(0, CONFIG_SYS_SDRAM_BASE);
+ writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset);
+ /* Check if the same value is actually observed when reading back */
+ return readl(CONFIG_SYS_SDRAM_BASE) ==
+ readl(CONFIG_SYS_SDRAM_BASE + offset);
+}
diff --git a/arch/arm/cpu/armv7/sunxi/fel_utils.S b/arch/arm/cpu/armv7/sunxi/fel_utils.S
new file mode 100644
index 0000000..bf00335
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/fel_utils.S
@@ -0,0 +1,42 @@
+/*
+ * Utility functions for FEL mode.
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+ ldr r0, =fel_stash
+ str sp, [r0, #0]
+ str lr, [r0, #4]
+ mrs lr, cpsr @ Read CPSR
+ str lr, [r0, #8]
+ mrc p15, 0, lr, c1, c0, 0 @ Read CP15 SCTLR Register
+ str lr, [r0, #12]
+ mrc p15, 0, lr, c12, c0, 0 @ Read VBAR
+ str lr, [r0, #16]
+ mrc p15, 0, lr, c1, c0, 0 @ Read CP15 Control Register
+ str lr, [r0, #20]
+ b save_boot_params_ret
+ENDPROC(save_boot_params)
+
+ENTRY(return_to_fel)
+ mov sp, r0
+ mov lr, r1
+ ldr r0, =fel_stash
+ ldr r1, [r0, #20]
+ mcr p15, 0, r1, c1, c0, 0 @ Write CP15 Control Register
+ ldr r1, [r0, #16]
+ mcr p15, 0, r1, c12, c0, 0 @ Write VBAR
+ ldr r1, [r0, #12]
+ mcr p15, 0, r1, c1, c0, 0 @ Write CP15 SCTLR Register
+ ldr r1, [r0, #8]
+ msr cpsr, r1 @ Write CPSR
+ bx lr
+ENDPROC(return_to_fel)
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
deleted file mode 100644
index 928b7c1..0000000
--- a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2013
- * Henrik Nordstrom <henrik@henriknordstrom.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(s_init)
-SECTIONS
-{
- . = 0x00002000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text.s_init)
- *(.text*)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- . = ALIGN(4);
- .data : {
- *(.data*)
- }
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- . = ALIGN(4);
- . = .;
-
- . = ALIGN(4);
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
- }
-
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
- . = ALIGN(4);
- .note.gnu.build-id :
- {
- *(.note.gnu.build-id)
- }
- _end = .;
-
- . = ALIGN(4096);
- .mmutable : {
- *(.mmutable)
- }
-
- .bss_start __rel_dyn_start (OVERLAY) : {
- KEEP(*(.__bss_start));
- __bss_base = .;
- }
-
- .bss __bss_base (OVERLAY) : {
- *(.bss*)
- . = ALIGN(4);
- __bss_limit = .;
- }
-
- .bss_end __bss_limit (OVERLAY) : {
- KEEP(*(.__bss_end));
- }
-
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
- /DISCARD/ : { *(.note*) }
-}
diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig
deleted file mode 100644
index 1446452..0000000
--- a/arch/arm/cpu/armv7/tegra-common/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-if TEGRA
-
-choice
- prompt "Tegra SoC select"
-
-config TEGRA20
- bool "Tegra20 family"
-
-config TEGRA30
- bool "Tegra30 family"
-
-config TEGRA114
- bool "Tegra114 family"
-
-config TEGRA124
- bool "Tegra124 family"
-
-endchoice
-
-config USE_PRIVATE_LIBGCC
- default y if SPL_BUILD
-
-source "arch/arm/cpu/armv7/tegra20/Kconfig"
-source "arch/arm/cpu/armv7/tegra30/Kconfig"
-source "arch/arm/cpu/armv7/tegra114/Kconfig"
-source "arch/arm/cpu/armv7/tegra124/Kconfig"
-
-endif
diff --git a/arch/arm/cpu/armv7/tegra-common/Makefile b/arch/arm/cpu/armv7/tegra-common/Makefile
deleted file mode 100644
index 463c260..0000000
--- a/arch/arm/cpu/armv7/tegra-common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile
deleted file mode 100644
index 9b4295c..0000000
--- a/arch/arm/cpu/armv7/tegra20/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_PWM_TEGRA) += pwm.o
-obj-$(CONFIG_VIDEO_TEGRA) += display.o
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 5c5a84f..8335685 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD
endchoice
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x400
+
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
@@ -58,14 +64,12 @@ config CMD_PINMON
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
- depends on !SPL_BUILD
help
The command "ddrphy" shows the resulting parameters of DDR PHY
training; it is useful for the evaluation of DDR PHY training.
choice
prompt "DDR3 Frequency select"
- depends on SPL_BUILD
config DDR_FREQ_1600
bool "DDR3 1600"
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
index 9c6e824..fa447bc 100644
--- a/arch/arm/cpu/armv8/cache.S
+++ b/arch/arm/cpu/armv8/cache.S
@@ -155,3 +155,9 @@ ENTRY(__asm_invalidate_icache_all)
isb sy
ret
ENDPROC(__asm_invalidate_icache_all)
+
+ENTRY(__asm_flush_l3_cache)
+ mov x0, #0 /* return status as success */
+ ret
+ENDPROC(__asm_flush_l3_cache)
+ .weak __asm_flush_l3_cache
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 9dbcdf2..c5ec529 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -73,17 +73,21 @@ void invalidate_dcache_all(void)
__asm_invalidate_dcache_all();
}
-void __weak flush_l3_cache(void)
-{
-}
-
/*
- * Performs a clean & invalidation of the entire data cache at all levels
+ * Performs a clean & invalidation of the entire data cache at all levels.
+ * This function needs to be inline to avoid using stack.
+ * __asm_flush_l3_cache return status of timeout
*/
-void flush_dcache_all(void)
+inline void flush_dcache_all(void)
{
+ int ret;
+
__asm_flush_dcache_all();
- flush_l3_cache();
+ ret = __asm_flush_l3_cache();
+ if (ret)
+ debug("flushing dcache returns 0x%x\n", ret);
+ else
+ debug("flushing dcache successfully.\n");
}
/*
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
index 47b947f..4997487 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
@@ -10,10 +10,10 @@
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+#include <fsl-mc/fsl_mc.h>
#include "cpu.h"
#include "mp.h"
#include "speed.h"
-#include <fsl_mc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -150,7 +150,7 @@ static inline void final_mmu_setup(void)
* set level 2 table 0 to cache-inhibit, covering 0 to 1GB
*/
section_l1t0 = 0;
- section_l1t1 = BLOCK_SIZE_L0;
+ section_l1t1 = BLOCK_SIZE_L0 | PMD_SECT_OUTER_SHARE;
section_l2 = 0;
for (i = 0; i < 512; i++) {
set_pgtable_section(level1_table_0, i, section_l1t0,
@@ -168,10 +168,10 @@ static inline void final_mmu_setup(void)
(u64)level2_table_0 | PMD_TYPE_TABLE;
level1_table_0[2] =
0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT |
- PMD_ATTRINDX(MT_NORMAL);
+ PMD_SECT_OUTER_SHARE | PMD_ATTRINDX(MT_NORMAL);
level1_table_0[3] =
0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
- PMD_ATTRINDX(MT_NORMAL);
+ PMD_SECT_OUTER_SHARE | PMD_ATTRINDX(MT_NORMAL);
/* Rewrite table to enable cache */
set_pgtable_section(level2_table_0,
@@ -243,59 +243,6 @@ int arch_cpu_init(void)
}
/*
- * flush_l3_cache
- * Dickens L3 cache can be flushed by transitioning from FAM to SFONLY power
- * state, by writing to HP-F P-state request register.
- * Fixme: This function should moved to a common file if other SoCs also use
- * the same Dickens.
- */
-#define HNF0_PSTATE_REQ 0x04200010
-#define HNF1_PSTATE_REQ 0x04210010
-#define HNF2_PSTATE_REQ 0x04220010
-#define HNF3_PSTATE_REQ 0x04230010
-#define HNF4_PSTATE_REQ 0x04240010
-#define HNF5_PSTATE_REQ 0x04250010
-#define HNF6_PSTATE_REQ 0x04260010
-#define HNF7_PSTATE_REQ 0x04270010
-#define HNFPSTAT_MASK (0xFFFFFFFFFFFFFFFC)
-#define HNFPSTAT_FAM 0x3
-#define HNFPSTAT_SFONLY 0x01
-
-static void hnf_pstate_req(u64 *ptr, u64 state)
-{
- int timeout = 1000;
- out_le64(ptr, (in_le64(ptr) & HNFPSTAT_MASK) | (state & 0x3));
- ptr++;
- /* checking if the transition is completed */
- while (timeout > 0) {
- if (((in_le64(ptr) & 0x0c) >> 2) == (state & 0x3))
- break;
- udelay(100);
- timeout--;
- }
-}
-
-void flush_l3_cache(void)
-{
- hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_SFONLY);
- hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_FAM);
- hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_FAM);
-}
-
-/*
* This function is called from lib/board.c.
* It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
* There is no need to disable d-cache for this operation.
@@ -420,6 +367,7 @@ int print_cpuinfo(void)
printf("\n Bus: %-4s MHz ",
strmhz(buf, sysinfo.freq_systembus));
printf("DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus));
+ printf(" DP-DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus2));
puts("\n");
return 0;
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c
index e392eb9..7eb9b6a 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c
@@ -16,7 +16,7 @@ void ft_fixup_cpu(void *blob)
__maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr();
fdt32_t *reg;
int addr_cells;
- u64 val;
+ u64 val, core_id;
size_t *boot_code_size = &(__secondary_boot_code_size);
off = fdt_path_offset(blob, "/cpus");
@@ -29,15 +29,20 @@ void ft_fixup_cpu(void *blob)
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0);
+ core_id = of_read_number(reg, addr_cells);
if (reg) {
- val = spin_tbl_addr;
- val += id_to_core(of_read_number(reg, addr_cells))
- * SPIN_TABLE_ELEM_SIZE;
- val = cpu_to_fdt64(val);
- fdt_setprop_string(blob, off, "enable-method",
- "spin-table");
- fdt_setprop(blob, off, "cpu-release-addr",
- &val, sizeof(val));
+ if (core_id == 0 || (is_core_online(core_id))) {
+ val = spin_tbl_addr;
+ val += id_to_core(core_id) *
+ SPIN_TABLE_ELEM_SIZE;
+ val = cpu_to_fdt64(val);
+ fdt_setprop_string(blob, off, "enable-method",
+ "spin-table");
+ fdt_setprop(blob, off, "cpu-release-addr",
+ &val, sizeof(val));
+ } else {
+ debug("skipping offline core\n");
+ }
} else {
puts("Warning: found cpu node without reg property\n");
}
@@ -55,4 +60,9 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CONFIG_MP
ft_fixup_cpu(blob);
#endif
+
+#ifdef CONFIG_SYS_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
index 2a88aab..886576e 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
@@ -42,10 +42,142 @@ ENTRY(lowlevel_init)
ldr x0, =secondary_boot_func
blr x0
2:
+
+#ifdef CONFIG_FSL_TZPC_BP147
+ /* Set Non Secure access for all devices protected via TZPC */
+ ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */
+ orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */
+ str w0, [x1]
+
+ isb
+ dsb sy
+#endif
+
+#ifdef CONFIG_FSL_TZASC_400
+ /* Set TZASC so that:
+ * a. We use only Region0 whose global secure write/read is EN
+ * b. We use only Region0 whose NSAID write/read is EN
+ *
+ * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
+ * placeholders.
+ */
+ ldr x1, =TZASC_GATE_KEEPER(0)
+ ldr x0, [x1] /* Filter 0 Gate Keeper Register */
+ orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */
+ str x0, [x1]
+
+ ldr x1, =TZASC_GATE_KEEPER(1)
+ ldr x0, [x1] /* Filter 0 Gate Keeper Register */
+ orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */
+ str x0, [x1]
+
+ ldr x1, =TZASC_REGION_ATTRIBUTES_0(0)
+ ldr x0, [x1] /* Region-0 Attributes Register */
+ orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */
+ orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */
+ str x0, [x1]
+
+ ldr x1, =TZASC_REGION_ATTRIBUTES_0(1)
+ ldr x0, [x1] /* Region-1 Attributes Register */
+ orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */
+ orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */
+ str x0, [x1]
+
+ ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
+ ldr w0, [x1] /* Region-0 Access Register */
+ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
+ str w0, [x1]
+
+ ldr x1, =TZASC_REGION_ID_ACCESS_0(1)
+ ldr w0, [x1] /* Region-1 Attributes Register */
+ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
+ str w0, [x1]
+
+ isb
+ dsb sy
+#endif
mov lr, x29 /* Restore LR */
ret
ENDPROC(lowlevel_init)
+hnf_pstate_poll:
+ /* x0 has the desired status, return 0 for success, 1 for timeout
+ * clobber x1, x2, x3, x4, x6, x7
+ */
+ mov x1, x0
+ mov x7, #0 /* flag for timeout */
+ mrs x3, cntpct_el0 /* read timer */
+ add x3, x3, #1200 /* timeout after 100 microseconds */
+ mov x0, #0x18
+ movk x0, #0x420, lsl #16 /* HNF0_PSTATE_STATUS */
+ mov w6, #8 /* HN-F node count */
+1:
+ ldr x2, [x0]
+ cmp x2, x1 /* check status */
+ b.eq 2f
+ mrs x4, cntpct_el0
+ cmp x4, x3
+ b.ls 1b
+ mov x7, #1 /* timeout */
+ b 3f
+2:
+ add x0, x0, #0x10000 /* move to next node */
+ subs w6, w6, #1
+ cbnz w6, 1b
+3:
+ mov x0, x7
+ ret
+
+hnf_set_pstate:
+ /* x0 has the desired state, clobber x1, x2, x6 */
+ mov x1, x0
+ /* power state to SFONLY */
+ mov w6, #8 /* HN-F node count */
+ mov x0, #0x10
+ movk x0, #0x420, lsl #16 /* HNF0_PSTATE_REQ */
+1: /* set pstate to sfonly */
+ ldr x2, [x0]
+ and x2, x2, #0xfffffffffffffffc /* & HNFPSTAT_MASK */
+ orr x2, x2, x1
+ str x2, [x0]
+ add x0, x0, #0x10000 /* move to next node */
+ subs w6, w6, #1
+ cbnz w6, 1b
+
+ ret
+
+ENTRY(__asm_flush_l3_cache)
+ /*
+ * Return status in x0
+ * success 0
+ * tmeout 1 for setting SFONLY, 2 for FAM, 3 for both
+ */
+ mov x29, lr
+ mov x8, #0
+
+ dsb sy
+ mov x0, #0x1 /* HNFPSTAT_SFONLY */
+ bl hnf_set_pstate
+
+ mov x0, #0x4 /* SFONLY status */
+ bl hnf_pstate_poll
+ cbz x0, 1f
+ mov x8, #1 /* timeout */
+1:
+ dsb sy
+ mov x0, #0x3 /* HNFPSTAT_FAM */
+ bl hnf_set_pstate
+
+ mov x0, #0xc /* FAM status */
+ bl hnf_pstate_poll
+ cbz x0, 1f
+ add x8, x8, #0x2
+1:
+ mov x0, x8
+ mov lr, x29
+ ret
+ENDPROC(__asm_flush_l3_cache)
+
/* Keep literals not used by the secondary boot code outside it */
.ltorg
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.c b/arch/arm/cpu/armv8/fsl-lsch3/mp.c
index 94998bf..ce9c0c1 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/mp.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.c
@@ -83,6 +83,14 @@ int is_core_valid(unsigned int core)
return !!((1 << core) & cpu_mask());
}
+int is_core_online(u64 cpu_id)
+{
+ u64 *table;
+ int pos = id_to_core(cpu_id);
+ table = (u64 *)get_spin_tbl_addr() + pos * WORDS_PER_SPIN_TABLE_ENTRY;
+ return table[SPIN_TABLE_ELEM_STATUS_IDX] == 1;
+}
+
int cpu_reset(int nr)
{
puts("Feature is not implemented.\n");
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.h b/arch/arm/cpu/armv8/fsl-lsch3/mp.h
index 06ac0bc..66144d6 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/mp.h
+++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.h
@@ -32,5 +32,6 @@ int fsl_lsch3_wake_seconday_cores(void);
void *get_spin_tbl_addr(void);
phys_addr_t determine_mp_bootpg(void);
void secondary_boot_func(void);
+int is_core_online(u64 cpu_id);
#endif
#endif /* _FSL_CH3_MP_H */
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c
index dc4a34b..72cd999 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/speed.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c
@@ -77,8 +77,10 @@ void get_sys_info(struct sys_info *sys_info)
sys_info->freq_systembus = sysclk;
#ifdef CONFIG_DDR_CLK_FREQ
sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+ sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ;
#else
sys_info->freq_ddrbus = sysclk;
+ sys_info->freq_ddrbus2 = sysclk;
#endif
sys_info->freq_systembus *= (in_le32(&gur->rcwsr[0]) >>
@@ -87,6 +89,9 @@ void get_sys_info(struct sys_info *sys_info)
sys_info->freq_ddrbus *= (in_le32(&gur->rcwsr[0]) >>
FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
+ sys_info->freq_ddrbus2 *= (in_le32(&gur->rcwsr[0]) >>
+ FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
+ FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
/*
@@ -129,7 +134,7 @@ int get_clocks(void)
gd->cpu_clk = sys_info.freq_processor[0];
gd->bus_clk = sys_info.freq_systembus;
gd->mem_clk = sys_info.freq_ddrbus;
-
+ gd->arch.mem2_clk = sys_info.freq_ddrbus2;
#if defined(CONFIG_FSL_ESDHC)
gd->arch.sdhc_clk = gd->bus_clk / 2;
#endif /* defined(CONFIG_FSL_ESDHC) */
@@ -156,11 +161,18 @@ ulong get_bus_freq(ulong dummy)
* get_ddr_freq
* return ddr bus freq in Hz
*********************************************/
-ulong get_ddr_freq(ulong dummy)
+ulong get_ddr_freq(ulong ctrl_num)
{
if (!gd->mem_clk)
get_clocks();
+ /*
+ * DDR controller 0 & 1 are on memory complex 0
+ * DDR controler 2 is on memory complext 1
+ */
+ if (ctrl_num >= 2)
+ return gd->arch.mem2_clk;
+
return gd->mem_clk;
}
diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
index 00a2917..582f6e5 100644
--- a/arch/arm/dts/exynos4412-odroid.dts
+++ b/arch/arm/dts/exynos4412-odroid.dts
@@ -85,4 +85,9 @@
reg = <0x125B0000 0x100>;
};
};
+
+ emmc-reset {
+ compatible = "samsung,emmc-reset";
+ reset-gpio = <&gpk1 2 0>;
+ };
};
diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts
index 8f46637..d0a8621 100644
--- a/arch/arm/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -46,4 +46,9 @@
mmc@12220000 {
fifoth_val = <0x201f0020>;
};
+
+ emmc-reset {
+ compatible = "samsung,emmc-reset";
+ reset-gpio = <&gpd1 0 0>;
+ };
};
diff --git a/arch/arm/include/asm/arch-a320/a320.h b/arch/arm/include/asm/arch-a320/a320.h
deleted file mode 100644
index f2db8e1..0000000
--- a/arch/arm/include/asm/arch-a320/a320.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __A320_H
-#define __A320_H
-
-/*
- * Hardware register bases
- */
-#define CONFIG_FTSMC020_BASE 0x90200000 /* Static Memory Controller */
-#define CONFIG_DEBUG_LED 0x902ffffc /* Debug LED */
-#define CONFIG_FTSDMC020_BASE 0x90300000 /* SDRAM Controller */
-#define CONFIG_FTMAC100_BASE 0x90900000 /* Ethernet */
-#define CONFIG_FTPMU010_BASE 0x98100000 /* Power Management Unit */
-#define CONFIG_FTTMR010_BASE 0x98400000 /* Timer */
-#define CONFIG_FTRTC010_BASE 0x98600000 /* Real Time Clock*/
-
-#endif /* __A320_H */
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index b94b56c..523d22e 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -400,6 +400,8 @@ struct prm_device_inst {
struct cm_dpll {
unsigned int resv1;
unsigned int clktimer2clk; /* offset 0x04 */
+ unsigned int resv2[11];
+ unsigned int clkselmacclk; /* offset 0x34 */
};
#endif /* CONFIG_AM43XX */
diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h b/arch/arm/include/asm/arch-bcm2835/gpio.h
index db42896..c8ef8f5 100644
--- a/arch/arm/include/asm/arch-bcm2835/gpio.h
+++ b/arch/arm/include/asm/arch-bcm2835/gpio.h
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2012 Vikram Narayananan
* <vikram186@gmail.com>
+ * (C) Copyright 2012,2015 Stephen Warren
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,7 +9,11 @@
#ifndef _BCM2835_GPIO_H_
#define _BCM2835_GPIO_H_
+#ifdef CONFIG_BCM2836
+#define BCM2835_GPIO_BASE 0x3f200000
+#else
#define BCM2835_GPIO_BASE 0x20200000
+#endif
#define BCM2835_GPIO_COUNT 54
#define BCM2835_GPIO_FSEL_MASK 0x7
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
index 88d2ec1..04bf480 100644
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -38,7 +38,11 @@
/* Raw mailbox HW */
+#ifdef CONFIG_BCM2836
+#define BCM2835_MBOX_PHYSADDR 0x3f00b880
+#else
#define BCM2835_MBOX_PHYSADDR 0x2000b880
+#endif
struct bcm2835_mbox_regs {
u32 read;
@@ -121,6 +125,9 @@ struct bcm2835_mbox_tag_hdr {
#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002
+#ifdef CONFIG_BCM2836
+#define BCM2836_BOARD_REV_2_B 0x4
+#else
/*
* 0x2..0xf from:
* http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
@@ -141,6 +148,7 @@ struct bcm2835_mbox_tag_hdr {
#define BCM2835_BOARD_REV_B_PLUS 0x10
#define BCM2835_BOARD_REV_CM 0x11
#define BCM2835_BOARD_REV_A_PLUS 0x12
+#endif
struct bcm2835_mbox_tag_get_board_rev {
struct bcm2835_mbox_tag_hdr tag_hdr;
diff --git a/arch/arm/include/asm/arch-bcm2835/sdhci.h b/arch/arm/include/asm/arch-bcm2835/sdhci.h
index a4f867b..2a21ccb 100644
--- a/arch/arm/include/asm/arch-bcm2835/sdhci.h
+++ b/arch/arm/include/asm/arch-bcm2835/sdhci.h
@@ -1,23 +1,17 @@
/*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef _BCM2835_SDHCI_H_
#define _BCM2835_SDHCI_H_
+#ifdef CONFIG_BCM2836
+#define BCM2835_SDHCI_BASE 0x3f300000
+#else
#define BCM2835_SDHCI_BASE 0x20300000
+#endif
int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq);
diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/include/asm/arch-bcm2835/timer.h
index c2001b6..fc7aec7 100644
--- a/arch/arm/include/asm/arch-bcm2835/timer.h
+++ b/arch/arm/include/asm/arch-bcm2835/timer.h
@@ -1,23 +1,17 @@
/*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef _BCM2835_TIMER_H
#define _BCM2835_TIMER_H
+#ifdef CONFIG_BCM2836
+#define BCM2835_TIMER_PHYSADDR 0x3f003000
+#else
#define BCM2835_TIMER_PHYSADDR 0x20003000
+#endif
struct bcm2835_timer_regs {
u32 cs;
diff --git a/arch/arm/include/asm/arch-bcm2835/wdog.h b/arch/arm/include/asm/arch-bcm2835/wdog.h
index 303a65f..beb6a08 100644
--- a/arch/arm/include/asm/arch-bcm2835/wdog.h
+++ b/arch/arm/include/asm/arch-bcm2835/wdog.h
@@ -1,23 +1,17 @@
/*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef _BCM2835_TIMER_H
#define _BCM2835_TIMER_H
+#ifdef CONFIG_BCM2836
+#define BCM2835_WDOG_PHYSADDR 0x3f100000
+#else
#define BCM2835_WDOG_PHYSADDR 0x20100000
+#endif
struct bcm2835_wdog_regs {
u32 unknown0[7];
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index db24dc0..2a17dfc 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -26,6 +26,10 @@ enum pll_src_bit {
EXYNOS_SRC_MPLL = 6,
EXYNOS_SRC_EPLL,
EXYNOS_SRC_VPLL,
+ EXYNOS542X_SRC_MPLL = 3,
+ EXYNOS542X_SRC_SPLL,
+ EXYNOS542X_SRC_EPLL = 6,
+ EXYNOS542X_SRC_RPLL,
};
unsigned long get_pll_clk(int pllreg);
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h
index da551e8..b140c1f 100644
--- a/arch/arm/include/asm/arch-fsl-lsch3/config.h
+++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h
@@ -30,11 +30,44 @@
#define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \
0x18A0)
+#define CONFIG_SYS_FSL_DCSR_DDR_ADDR 0x70012c000ULL
+#define CONFIG_SYS_FSL_DCSR_DDR2_ADDR 0x70012d000ULL
+#define CONFIG_SYS_FSL_DCSR_DDR3_ADDR 0x700132000ULL
+#define CONFIG_SYS_FSL_DCSR_DDR4_ADDR 0x700133000ULL
+
#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01000000)
#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000)
#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000)
#define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000)
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE 0x02200000
+#define TZPCR0SIZE_BASE (TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820)
+
+/* TZ Address Space Controller Definitions */
+#define TZASC1_BASE 0x01100000 /* as per CCSR map. */
+#define TZASC2_BASE 0x01110000 /* as per CCSR map. */
+#define TZASC3_BASE 0x01120000 /* as per CCSR map. */
+#define TZASC4_BASE 0x01130000 /* as per CCSR map. */
+#define TZASC_BUILD_CONFIG_REG(x) ((TZASC1_BASE + (x * 0x10000)))
+#define TZASC_ACTION_REG(x) ((TZASC1_BASE + (x * 0x10000)) + 0x004)
+#define TZASC_GATE_KEEPER(x) ((TZASC1_BASE + (x * 0x10000)) + 0x008)
+#define TZASC_REGION_BASE_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x100)
+#define TZASC_REGION_BASE_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x104)
+#define TZASC_REGION_TOP_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x108)
+#define TZASC_REGION_TOP_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x10C)
+#define TZASC_REGION_ATTRIBUTES_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x110)
+#define TZASC_REGION_ID_ACCESS_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x114)
+
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0x06000000
#define GICR_BASE 0x06100000
@@ -68,4 +101,9 @@
#error SoC not defined
#endif
+#ifdef CONFIG_LS2085A
+#define CONFIG_SYS_FSL_ERRATUM_A008336
+#define CONFIG_SYS_FSL_ERRATUM_A008514
+#endif
+
#endif /* _ASM_ARMV8_FSL_LSCH3_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
index ee1d651..dd11ef7 100644
--- a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
@@ -15,6 +15,7 @@ struct sys_info {
unsigned long freq_processor[CONFIG_MAX_CPUS];
unsigned long freq_systembus;
unsigned long freq_ddrbus;
+ unsigned long freq_ddrbus2;
unsigned long freq_localbus;
unsigned long freq_qe;
#ifdef CONFIG_SYS_DPAA_FMAN
@@ -60,6 +61,8 @@ struct ccsr_gur {
#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK 0x1f
#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT 10
#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT 18
+#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK 0x3f
u8 res_180[0x200-0x180];
u32 scratchrw[32]; /* Scratch Read/Write */
u8 res_280[0x300-0x280];
diff --git a/arch/arm/include/asm/arch-ks8695/platform.h b/arch/arm/include/asm/arch-ks8695/platform.h
deleted file mode 100644
index 02f6049..0000000
--- a/arch/arm/include/asm/arch-ks8695/platform.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __address_h
-#define __address_h 1
-
-#define KS8695_SDRAM_START 0x00000000
-#define KS8695_SDRAM_SIZE 0x01000000
-#define KS8695_MEM_SIZE KS8695_SDRAM_SIZE
-#define KS8695_MEM_START KS8695_SDRAM_START
-
-#define KS8695_PCMCIA_IO_BASE 0x03800000
-#define KS8695_PCMCIA_IO_SIZE 0x00040000
-
-#define KS8695_IO_BASE 0x03FF0000
-#define KS8695_IO_SIZE 0x00010000
-
-#define KS8695_SYSTEN_CONFIG 0x00
-#define KS8695_SYSTEN_BUS_CLOCK 0x04
-
-#define KS8695_FLASH_START 0x02800000
-#define KS8695_FLASH_SIZE 0x00400000
-
-/*i/o control registers offset difinitions*/
-#define KS8695_IO_CTRL0 0x4000
-#define KS8695_IO_CTRL1 0x4004
-#define KS8695_IO_CTRL2 0x4008
-#define KS8695_IO_CTRL3 0x400C
-
-/*memory control registers offset difinitions*/
-#define KS8695_MEM_CTRL0 0x4010
-#define KS8695_MEM_CTRL1 0x4014
-#define KS8695_MEM_CTRL2 0x4018
-#define KS8695_MEM_CTRL3 0x401C
-#define KS8695_MEM_GENERAL 0x4020
-#define KS8695_SDRAM_CTRL0 0x4030
-#define KS8695_SDRAM_CTRL1 0x4034
-#define KS8695_SDRAM_GENERAL 0x4038
-#define KS8695_SDRAM_BUFFER 0x403C
-#define KS8695_SDRAM_REFRESH 0x4040
-
-/*WAN control registers offset difinitions*/
-#define KS8695_WAN_DMA_TX 0x6000
-#define KS8695_WAN_DMA_RX 0x6004
-#define KS8695_WAN_DMA_TX_START 0x6008
-#define KS8695_WAN_DMA_RX_START 0x600C
-#define KS8695_WAN_TX_LIST 0x6010
-#define KS8695_WAN_RX_LIST 0x6014
-#define KS8695_WAN_MAC_LOW 0x6018
-#define KS8695_WAN_MAC_HIGH 0x601C
-#define KS8695_WAN_MAC_ELOW 0x6080
-#define KS8695_WAN_MAC_EHIGH 0x6084
-
-/*LAN control registers offset difinitions*/
-#define KS8695_LAN_DMA_TX 0x8000
-#define KS8695_LAN_DMA_RX 0x8004
-#define KS8695_LAN_DMA_TX_START 0x8008
-#define KS8695_LAN_DMA_RX_START 0x800C
-#define KS8695_LAN_TX_LIST 0x8010
-#define KS8695_LAN_RX_LIST 0x8014
-#define KS8695_LAN_MAC_LOW 0x8018
-#define KS8695_LAN_MAC_HIGH 0x801C
-#define KS8695_LAN_MAC_ELOW 0X8080
-#define KS8695_LAN_MAC_EHIGH 0X8084
-
-/*HPNA control registers offset difinitions*/
-#define KS8695_HPNA_DMA_TX 0xA000
-#define KS8695_HPNA_DMA_RX 0xA004
-#define KS8695_HPNA_DMA_TX_START 0xA008
-#define KS8695_HPNA_DMA_RX_START 0xA00C
-#define KS8695_HPNA_TX_LIST 0xA010
-#define KS8695_HPNA_RX_LIST 0xA014
-#define KS8695_HPNA_MAC_LOW 0xA018
-#define KS8695_HPNA_MAC_HIGH 0xA01C
-#define KS8695_HPNA_MAC_ELOW 0xA080
-#define KS8695_HPNA_MAC_EHIGH 0xA084
-
-/*UART control registers offset difinitions*/
-#define KS8695_UART_RX_BUFFER 0xE000
-#define KS8695_UART_TX_HOLDING 0xE004
-
-#define KS8695_UART_FIFO_CTRL 0xE008
-#define KS8695_UART_FIFO_TRIG01 0x00
-#define KS8695_UART_FIFO_TRIG04 0x80
-#define KS8695_UART_FIFO_TXRST 0x03
-#define KS8695_UART_FIFO_RXRST 0x02
-#define KS8695_UART_FIFO_FEN 0x01
-
-#define KS8695_UART_LINE_CTRL 0xE00C
-#define KS8695_UART_LINEC_BRK 0x40
-#define KS8695_UART_LINEC_EPS 0x10
-#define KS8695_UART_LINEC_PEN 0x08
-#define KS8695_UART_LINEC_STP2 0x04
-#define KS8695_UART_LINEC_WLEN8 0x03
-#define KS8695_UART_LINEC_WLEN7 0x02
-#define KS8695_UART_LINEC_WLEN6 0x01
-#define KS8695_UART_LINEC_WLEN5 0x00
-
-#define KS8695_UART_MODEM_CTRL 0xE010
-#define KS8695_UART_MODEMC_RTS 0x02
-#define KS8695_UART_MODEMC_DTR 0x01
-
-#define KS8695_UART_LINE_STATUS 0xE014
-#define KS8695_UART_LINES_TXFE 0x20
-#define KS8695_UART_LINES_BE 0x10
-#define KS8695_UART_LINES_FE 0x08
-#define KS8695_UART_LINES_PE 0x04
-#define KS8695_UART_LINES_OE 0x02
-#define KS8695_UART_LINES_RXFE 0x01
-#define KS8695_UART_LINES_ANY (KS8695_UART_LINES_OE|KS8695_UART_LINES_BE|KS8695_UART_LINES_PE|KS8695_UART_LINES_FE)
-
-#define KS8695_UART_MODEM_STATUS 0xE018
-#define KS8695_UART_MODEM_DCD 0x80
-#define KS8695_UART_MODEM_DSR 0x20
-#define KS8695_UART_MODEM_CTS 0x10
-#define KS8695_UART_MODEM_DDCD 0x08
-#define KS8695_UART_MODEM_DDSR 0x02
-#define KS8695_UART_MODEM_DCTS 0x01
-#define UART8695_MODEM_ANY 0xFF
-
-#define KS8695_UART_DIVISOR 0xE01C
-#define KS8695_UART_STATUS 0xE020
-
-/*Interrupt controlller registers offset difinitions*/
-#define KS8695_INT_CONTL 0xE200
-#define KS8695_INT_ENABLE 0xE204
-#define KS8695_INT_ENABLE_MODEM 0x0800
-#define KS8695_INT_ENABLE_ERR 0x0400
-#define KS8695_INT_ENABLE_RX 0x0200
-#define KS8695_INT_ENABLE_TX 0x0100
-
-#define KS8695_INT_STATUS 0xE208
-#define KS8695_INT_WAN_PRIORITY 0xE20C
-#define KS8695_INT_HPNA_PRIORITY 0xE210
-#define KS8695_INT_LAN_PRIORITY 0xE214
-#define KS8695_INT_TIMER_PRIORITY 0xE218
-#define KS8695_INT_UART_PRIORITY 0xE21C
-#define KS8695_INT_EXT_PRIORITY 0xE220
-#define KS8695_INT_CHAN_PRIORITY 0xE224
-#define KS8695_INT_BUSERROR_PRO 0xE228
-#define KS8695_INT_MASK_STATUS 0xE22C
-#define KS8695_FIQ_PEND_PRIORITY 0xE230
-#define KS8695_IRQ_PEND_PRIORITY 0xE234
-
-/*timer registers offset difinitions*/
-#define KS8695_TIMER_CTRL 0xE400
-#define KS8695_TIMER1 0xE404
-#define KS8695_TIMER0 0xE408
-#define KS8695_TIMER1_PCOUNT 0xE40C
-#define KS8695_TIMER0_PCOUNT 0xE410
-
-/*GPIO registers offset difinitions*/
-#define KS8695_GPIO_MODE 0xE600
-#define KS8695_GPIO_CTRL 0xE604
-#define KS8695_GPIO_DATA 0xE608
-
-/*SWITCH registers offset difinitions*/
-#define KS8695_SWITCH_CTRL0 0xE800
-#define KS8695_SWITCH_CTRL1 0xE804
-#define KS8695_SWITCH_PORT1 0xE808
-#define KS8695_SWITCH_PORT2 0xE80C
-#define KS8695_SWITCH_PORT3 0xE810
-#define KS8695_SWITCH_PORT4 0xE814
-#define KS8695_SWITCH_PORT5 0xE818
-#define KS8695_SWITCH_AUTO0 0xE81C
-#define KS8695_SWITCH_AUTO1 0xE820
-#define KS8695_SWITCH_LUE_CTRL 0xE824
-#define KS8695_SWITCH_LUE_HIGH 0xE828
-#define KS8695_SWITCH_LUE_LOW 0xE82C
-#define KS8695_SWITCH_ADVANCED 0xE830
-
-#define KS8695_SWITCH_LPPM12 0xE874
-#define KS8695_SWITCH_LPPM34 0xE878
-
-/*host communication registers difinitions*/
-#define KS8695_DSCP_HIGH 0xE834
-#define KS8695_DSCP_LOW 0xE838
-#define KS8695_SWITCH_MAC_HIGH 0xE83C
-#define KS8695_SWITCH_MAC_LOW 0xE840
-
-/*miscellaneours registers difinitions*/
-#define KS8695_MANAGE_COUNTER 0xE844
-#define KS8695_MANAGE_DATA 0xE848
-#define KS8695_LAN12_POWERMAGR 0xE84C
-#define KS8695_LAN34_POWERMAGR 0xE850
-
-#define KS8695_DEVICE_ID 0xEA00
-#define KS8695_REVISION_ID 0xEA04
-
-#define KS8695_MISC_CONTROL 0xEA08
-#define KS8695_WAN_CONTROL 0xEA0C
-#define KS8695_WAN_POWERMAGR 0xEA10
-#define KS8695_WAN_PHY_CONTROL 0xEA14
-#define KS8695_WAN_PHY_STATUS 0xEA18
-
-/* bus clock definitions*/
-#define KS8695_BUS_CLOCK_125MHZ 0x0
-#define KS8695_BUS_CLOCK_100MHZ 0x1
-#define KS8695_BUS_CLOCK_62MHZ 0x2
-#define KS8695_BUS_CLOCK_50MHZ 0x3
-#define KS8695_BUS_CLOCK_41MHZ 0x4
-#define KS8695_BUS_CLOCK_33MHZ 0x5
-#define KS8695_BUS_CLOCK_31MHZ 0x6
-#define KS8695_BUS_CLOCK_25MHZ 0x7
-
-/* -------------------------------------------------------------------------------
- * definations for IRQ
- * -------------------------------------------------------------------------------*/
-
-#define KS8695_INT_EXT_INT0 2
-#define KS8695_INT_EXT_INT1 3
-#define KS8695_INT_EXT_INT2 4
-#define KS8695_INT_EXT_INT3 5
-#define KS8695_INT_TIMERINT0 6
-#define KS8695_INT_TIMERINT1 7
-#define KS8695_INT_UART_TX 8
-#define KS8695_INT_UART_RX 9
-#define KS8695_INT_UART_LINE_ERR 10
-#define KS8695_INT_UART_MODEMS 11
-#define KS8695_INT_LAN_STOP_RX 12
-#define KS8695_INT_LAN_STOP_TX 13
-#define KS8695_INT_LAN_BUF_RX_STATUS 14
-#define KS8695_INT_LAN_BUF_TX_STATUS 15
-#define KS8695_INT_LAN_RX_STATUS 16
-#define KS8695_INT_LAN_TX_STATUS 17
-#define KS8695_INT_HPAN_STOP_RX 18
-#define KS8695_INT_HPNA_STOP_TX 19
-#define KS8695_INT_HPNA_BUF_RX_STATUS 20
-#define KS8695_INT_HPNA_BUF_TX_STATUS 21
-#define KS8695_INT_HPNA_RX_STATUS 22
-#define KS8695_INT_HPNA_TX_STATUS 23
-#define KS8695_INT_BUS_ERROR 24
-#define KS8695_INT_WAN_STOP_RX 25
-#define KS8695_INT_WAN_STOP_TX 26
-#define KS8695_INT_WAN_BUF_RX_STATUS 27
-#define KS8695_INT_WAN_BUF_TX_STATUS 28
-#define KS8695_INT_WAN_RX_STATUS 29
-#define KS8695_INT_WAN_TX_STATUS 30
-
-#define KS8695_INT_UART KS8695_INT_UART_TX
-
-/* -------------------------------------------------------------------------------
- * Interrupt bit positions
- *
- * -------------------------------------------------------------------------------
- */
-
-#define KS8695_INTMASK_EXT_INT0 ( 1 << KS8695_INT_EXT_INT0 )
-#define KS8695_INTMASK_EXT_INT1 ( 1 << KS8695_INT_EXT_INT1 )
-#define KS8695_INTMASK_EXT_INT2 ( 1 << KS8695_INT_EXT_INT2 )
-#define KS8695_INTMASK_EXT_INT3 ( 1 << KS8695_INT_EXT_INT3 )
-#define KS8695_INTMASK_TIMERINT0 ( 1 << KS8695_INT_TIMERINT0 )
-#define KS8695_INTMASK_TIMERINT1 ( 1 << KS8695_INT_TIMERINT1 )
-#define KS8695_INTMASK_UART_TX ( 1 << KS8695_INT_UART_TX )
-#define KS8695_INTMASK_UART_RX ( 1 << KS8695_INT_UART_RX )
-#define KS8695_INTMASK_UART_LINE_ERR ( 1 << KS8695_INT_UART_LINE_ERR )
-#define KS8695_INTMASK_UART_MODEMS ( 1 << KS8695_INT_UART_MODEMS )
-#define KS8695_INTMASK_LAN_STOP_RX ( 1 << KS8695_INT_LAN_STOP_RX )
-#define KS8695_INTMASK_LAN_STOP_TX ( 1 << KS8695_INT_LAN_STOP_TX )
-#define KS8695_INTMASK_LAN_BUF_RX_STATUS ( 1 << KS8695_INT_LAN_BUF_RX_STATUS )
-#define KS8695_INTMASK_LAN_BUF_TX_STATUS ( 1 << KS8695_INT_LAN_BUF_TX_STATUS )
-#define KS8695_INTMASK_LAN_RX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS )
-#define KS8695_INTMASK_LAN_TX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS )
-#define KS8695_INTMASK_HPAN_STOP_RX ( 1 << KS8695_INT_HPAN_STOP_RX )
-#define KS8695_INTMASK_HPNA_STOP_TX ( 1 << KS8695_INT_HPNA_STOP_TX )
-#define KS8695_INTMASK_HPNA_BUF_RX_STATUS ( 1 << KS8695_INT_HPNA_BUF_RX_STATUS )
-#define KS8695_INTMAKS_HPNA_BUF_TX_STATUS ( 1 << KS8695_INT_HPNA_BUF_TX_STATUS
-#define KS8695_INTMASK_HPNA_RX_STATUS ( 1 << KS8695_INT_HPNA_RX_STATUS )
-#define KS8695_INTMASK_HPNA_TX_STATUS ( 1 << KS8695_INT_HPNA_TX_STATUS )
-#define KS8695_INTMASK_BUS_ERROR ( 1 << KS8695_INT_BUS_ERROR )
-#define KS8695_INTMASK_WAN_STOP_RX ( 1 << KS8695_INT_WAN_STOP_RX )
-#define KS8695_INTMASK_WAN_STOP_TX ( 1 << KS8695_INT_WAN_STOP_TX )
-#define KS8695_INTMASK_WAN_BUF_RX_STATUS ( 1 << KS8695_INT_WAN_BUF_RX_STATUS )
-#define KS8695_INTMASK_WAN_BUF_TX_STATUS ( 1 << KS8695_INT_WAN_BUF_TX_STATUS )
-#define KS8695_INTMASK_WAN_RX_STATUS ( 1 << KS8695_INT_WAN_RX_STATUS )
-#define KS8695_INTMASK_WAN_TX_STATUS ( 1 << KS8695_INT_WAN_TX_STATUS )
-
-#define KS8695_SC_VALID_INT 0xFFFFFFFF
-#define MAXIRQNUM 31
-
-/*
- * Timer definitions
- *
- * Use timer 1 & 2
- * (both run at 25MHz).
- *
- */
-#define TICKS_PER_uSEC 25
-#define mSEC_1 1000
-#define mSEC_10 (mSEC_1 * 10)
-
-#endif
-
-/* END */
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index 8f6426b..564441c 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -1,7 +1,7 @@
/*
* Common definitions for LPC32XX board configurations
*
- * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -9,6 +9,8 @@
#ifndef _LPC32XX_CONFIG_H
#define _LPC32XX_CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Basic CPU architecture */
#define CONFIG_ARCH_CPU_INIT
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 7915518..3b6a169 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -36,6 +36,7 @@
#define CONFIG_SYS_LS102XA_USB1_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET)
+#define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000
#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000
#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
@@ -61,6 +62,20 @@
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
+#define CONFIG_SYS_PCIE1_PHYS_BASE 0x4000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_BASE 0x4800000000ULL
+#define CONFIG_SYS_PCIE1_VIRT_ADDR 0x24000000UL
+#define CONFIG_SYS_PCIE2_VIRT_ADDR 0x34000000UL
+#define CONFIG_SYS_PCIE_MMAP_SIZE (192 * 1024 * 1024) /* 192M */
+/*
+ * TLB will map VIRT_ADDR to (PHYS_BASE + VIRT_ADDR)
+ * So 40bit PCIe PHY addr can directly be converted to a 32bit virtual addr.
+ */
+#define CONFIG_SYS_PCIE1_PHYS_ADDR (CONFIG_SYS_PCIE1_PHYS_BASE + \
+ CONFIG_SYS_PCIE1_VIRT_ADDR)
+#define CONFIG_SYS_PCIE2_PHYS_ADDR (CONFIG_SYS_PCIE2_PHYS_BASE + \
+ CONFIG_SYS_PCIE2_VIRT_ADDR)
+
#ifdef CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_VERY_BIG_RAM
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index f70d568..3a64afc 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -37,6 +37,43 @@
#define DCFG_DCSR_PORCR1 0
+/*
+ * Define default values for some CCSR macros to make header files cleaner
+ *
+ * To completely disable CCSR relocation in a board header file, define
+ * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS
+ * to a value that is the same as CONFIG_SYS_CCSRBAR.
+ */
+
+#ifdef CONFIG_SYS_CCSRBAR_PHYS
+#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly."
+#endif
+
+#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR CONFIG_SYS_IMMR
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
+#endif
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_IMMR
+#endif
+
+#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
struct sys_info {
unsigned long freq_processor[CONFIG_MAX_CPUS];
unsigned long freq_systembus;
@@ -133,8 +170,7 @@ struct ccsr_scfg {
u32 pex1rdmmsgrqsr;
u32 pex2rdmmsgrqsr;
u32 spimsiclrcr;
- u32 pex1mscportsr;
- u32 pex2mscportsr;
+ u32 pexmscportsr[2];
u32 pex2pmwrcr;
u32 resv5[24];
u32 mac1_streamid;
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
index abd70fc..fa571b3 100644
--- a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
@@ -7,11 +7,68 @@
#ifndef __FSL_LS102XA_STREAM_ID_H_
#define __FSL_LS102XA_STREAM_ID_H_
+#include <fsl_sec.h>
+
+#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
+ { .compat = name, \
+ .id = { idA }, .num_ids = 1, \
+ .reg_offset = off + CONFIG_SYS_IMMR, \
+ .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
+ }
+
+#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
+ { .compat = name, \
+ .id = { idA, idB }, .num_ids = 2, \
+ .reg_offset = off + CONFIG_SYS_IMMR, \
+ .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
+ }
+
+/*
+ * handle both old and new versioned SEC properties:
+ * "fsl,secX.Y" became "fsl,sec-vX.Y" during development
+ */
+#define SET_SEC_JR_LIODN_ENTRY(jrnum, liodnA, liodnB) \
+ SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB, \
+ offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum), \
+ SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
+ offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum)
+
+/* This is a bit evil since we treat rtic param as both a string & hex value */
+#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
+ SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
+ liodnA, \
+ offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
+ SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
+ liodnA, \
+ offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, \
+ CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))
+
+#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
+ SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
+ offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
+ CONFIG_SYS_FSL_SEC_OFFSET, 0)
+
+struct liodn_id_table {
+ const char *compat;
+ u32 id[2];
+ u8 num_ids;
+ phys_addr_t compat_offset;
+ unsigned long reg_offset;
+};
+
struct smmu_stream_id {
uint16_t offset;
uint16_t stream_id;
char dev_name[32];
};
+void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size);
void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
#endif
diff --git a/arch/arm/include/asm/arch-mb86r0x/hardware.h b/arch/arm/include/asm/arch-mb86r0x/hardware.h
deleted file mode 100644
index 42a52bc..0000000
--- a/arch/arm/include/asm/arch-mb86r0x/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * (C) Copyright 2007
- *
- * Author : Carsten Schneider, mycable GmbH
- * <cs@mycable.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <linux/sizes.h>
-#include <asm/arch/mb86r0x.h>
-
-#endif
diff --git a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h b/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
deleted file mode 100644
index 7fec971..0000000
--- a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
+++ /dev/null
@@ -1,599 +0,0 @@
-/*
- * (C) Copyright 2007
- *
- * mb86r0x definitions
- *
- * Author : Carsten Schneider, mycable GmbH
- * <cs@mycable.de>
- *
- * (C) Copyright 2010
- * Matthias Weisser <weisserm@arcor.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef MB86R0X_H
-#define MB86R0X_H
-
-#ifndef __ASSEMBLY__
-
-/* GPIO registers */
-struct mb86r0x_gpio {
- uint32_t gpdr0;
- uint32_t gpdr1;
- uint32_t gpdr2;
- uint32_t res;
- uint32_t gpddr0;
- uint32_t gpddr1;
- uint32_t gpddr2;
-};
-
-/* PWM registers */
-struct mb86r0x_pwm {
- uint32_t bcr;
- uint32_t tpr;
- uint32_t pr;
- uint32_t dr;
- uint32_t cr;
- uint32_t sr;
- uint32_t ccr;
- uint32_t ir;
-};
-
-/* The mb86r0x chip control (CCNT) register set. */
-struct mb86r0x_ccnt {
- uint32_t ccid;
- uint32_t csrst;
- uint32_t pad0[2];
- uint32_t cist;
- uint32_t cistm;
- uint32_t cgpio_ist;
- uint32_t cgpio_istm;
- uint32_t cgpio_ip;
- uint32_t cgpio_im;
- uint32_t caxi_bw;
- uint32_t caxi_ps;
- uint32_t cmux_md;
- uint32_t cex_pin_st;
- uint32_t cmlb;
- uint32_t pad1[1];
- uint32_t cusb;
- uint32_t pad2[41];
- uint32_t cbsc;
- uint32_t cdcrc;
- uint32_t cmsr0;
- uint32_t cmsr1;
- uint32_t pad3[2];
-};
-
-/* The mb86r0x clock reset generator */
-struct mb86r0x_crg {
- uint32_t crpr;
- uint32_t pad0;
- uint32_t crwr;
- uint32_t crsr;
- uint32_t crda;
- uint32_t crdb;
- uint32_t crha;
- uint32_t crpa;
- uint32_t crpb;
- uint32_t crhb;
- uint32_t cram;
-};
-
-/* The mb86r0x timer */
-struct mb86r0x_timer {
- uint32_t load;
- uint32_t value;
- uint32_t control;
- uint32_t intclr;
- uint32_t ris;
- uint32_t mis;
- uint32_t bgload;
-};
-
-/* mb86r0x gdc display controller */
-struct mb86r0x_gdc_dsp {
- /* Display settings */
- uint32_t dcm0;
- uint16_t pad00;
- uint16_t htp;
- uint16_t hdp;
- uint16_t hdb;
- uint16_t hsp;
- uint8_t hsw;
- uint8_t vsw;
- uint16_t pad01;
- uint16_t vtr;
- uint16_t vsp;
- uint16_t vdp;
- uint16_t wx;
- uint16_t wy;
- uint16_t ww;
- uint16_t wh;
-
- /* Layer 0 */
- uint32_t l0m;
- uint32_t l0oa;
- uint32_t l0da;
- uint16_t l0dx;
- uint16_t l0dy;
-
- /* Layer 1 */
- uint32_t l1m;
- uint32_t cbda0;
- uint32_t cbda1;
- uint32_t pad02;
-
- /* Layer 2 */
- uint32_t l2m;
- uint32_t l2oa0;
- uint32_t l2da0;
- uint32_t l2oa1;
- uint32_t l2da1;
- uint16_t l2dx;
- uint16_t l2dy;
-
- /* Layer 3 */
- uint32_t l3m;
- uint32_t l3oa0;
- uint32_t l3da0;
- uint32_t l3oa1;
- uint32_t l3da1;
- uint16_t l3dx;
- uint16_t l3dy;
-
- /* Layer 4 */
- uint32_t l4m;
- uint32_t l4oa0;
- uint32_t l4da0;
- uint32_t l4oa1;
- uint32_t l4da1;
- uint16_t l4dx;
- uint16_t l4dy;
-
- /* Layer 5 */
- uint32_t l5m;
- uint32_t l5oa0;
- uint32_t l5da0;
- uint32_t l5oa1;
- uint32_t l5da1;
- uint16_t l5dx;
- uint16_t l5dy;
-
- /* Cursor */
- uint16_t cutc;
- uint8_t cpm;
- uint8_t csize;
- uint32_t cuoa0;
- uint16_t cux0;
- uint16_t cuy0;
- uint32_t cuoa1;
- uint16_t cux1;
- uint16_t cuy1;
-
- /* Layer blending */
- uint32_t l0bld;
- uint32_t pad03;
- uint32_t l0tc;
- uint16_t l3tc;
- uint16_t l2tc;
- uint32_t pad04[15];
-
- /* Display settings */
- uint32_t dcm1;
- uint32_t dcm2;
- uint32_t dcm3;
- uint32_t pad05;
-
- /* Layer 0 extended */
- uint32_t l0em;
- uint16_t l0wx;
- uint16_t l0wy;
- uint16_t l0ww;
- uint16_t l0wh;
- uint32_t pad06;
-
- /* Layer 1 extended */
- uint32_t l1em;
- uint16_t l1wx;
- uint16_t l1wy;
- uint16_t l1ww;
- uint16_t l1wh;
- uint32_t pad07;
-
- /* Layer 2 extended */
- uint32_t l2em;
- uint16_t l2wx;
- uint16_t l2wy;
- uint16_t l2ww;
- uint16_t l2wh;
- uint32_t pad08;
-
- /* Layer 3 extended */
- uint32_t l3em;
- uint16_t l3wx;
- uint16_t l3wy;
- uint16_t l3ww;
- uint16_t l3wh;
- uint32_t pad09;
-
- /* Layer 4 extended */
- uint32_t l4em;
- uint16_t l4wx;
- uint16_t l4wy;
- uint16_t l4ww;
- uint16_t l4wh;
- uint32_t pad10;
-
- /* Layer 5 extended */
- uint32_t l5em;
- uint16_t l5wx;
- uint16_t l5wy;
- uint16_t l5ww;
- uint16_t l5wh;
- uint32_t pad11;
-
- /* Multi screen control */
- uint32_t msc;
- uint32_t pad12[3];
- uint32_t dls;
- uint32_t dbgc;
-
- /* Layer blending */
- uint32_t l1bld;
- uint32_t l2bld;
- uint32_t l3bld;
- uint32_t l4bld;
- uint32_t l5bld;
- uint32_t pad13;
-
- /* Extended transparency control */
- uint32_t l0etc;
- uint32_t l1etc;
- uint32_t l2etc;
- uint32_t l3etc;
- uint32_t l4etc;
- uint32_t l5etc;
- uint32_t pad14[10];
-
- /* YUV coefficients */
- uint32_t l1ycr0;
- uint32_t l1ycr1;
- uint32_t l1ycg0;
- uint32_t l1ycg1;
- uint32_t l1ycb0;
- uint32_t l1ycb1;
- uint32_t pad15[130];
-
- /* Layer palletes */
- uint32_t l0pal[256];
- uint32_t l1pal[256];
- uint32_t pad16[256];
- uint32_t l2pal[256];
- uint32_t l3pal[256];
- uint32_t pad17[256];
-
- /* PWM settings */
- uint32_t vpwmm;
- uint16_t vpwms;
- uint16_t vpwme;
- uint32_t vpwmc;
- uint32_t pad18[253];
-};
-
-/* mb86r0x gdc capture controller */
-struct mb86r0x_gdc_cap {
- uint32_t vcm;
- uint32_t csc;
- uint32_t vcs;
- uint32_t pad01;
-
- uint32_t cbm;
- uint32_t cboa;
- uint32_t cbla;
- uint16_t cihstr;
- uint16_t civstr;
- uint16_t cihend;
- uint16_t civend;
- uint32_t pad02;
-
- uint32_t chp;
- uint32_t cvp;
- uint32_t pad03[4];
-
- uint32_t clpf;
- uint32_t pad04;
- uint32_t cmss;
- uint32_t cmds;
- uint32_t pad05[12];
-
- uint32_t rgbhc;
- uint32_t rgbhen;
- uint32_t rgbven;
- uint32_t pad06;
- uint32_t rgbs;
- uint32_t pad07[11];
-
- uint32_t rgbcmy;
- uint32_t rgbcmcb;
- uint32_t rgbcmcr;
- uint32_t rgbcmb;
- uint32_t pad08[12 + 1984];
-};
-
-/* mb86r0x gdc draw */
-struct mb86r0x_gdc_draw {
- uint32_t ys;
- uint32_t xs;
- uint32_t dxdy;
- uint32_t xus;
- uint32_t dxudy;
- uint32_t xls;
- uint32_t dxldy;
- uint32_t usn;
- uint32_t lsn;
- uint32_t pad01[7];
- uint32_t rs;
- uint32_t drdx;
- uint32_t drdy;
- uint32_t gs;
- uint32_t dgdx;
- uint32_t dgdy;
- uint32_t bs;
- uint32_t dbdx;
- uint32_t dbdy;
- uint32_t pad02[7];
- uint32_t zs;
- uint32_t dzdx;
- uint32_t dzdy;
- uint32_t pad03[13];
- uint32_t ss;
- uint32_t dsdx;
- uint32_t dsdy;
- uint32_t ts;
- uint32_t dtdx;
- uint32_t dtdy;
- uint32_t qs;
- uint32_t dqdx;
- uint32_t dqdy;
- uint32_t pad04[23];
- uint32_t lpn;
- uint32_t lxs;
- uint32_t lxde;
- uint32_t lys;
- uint32_t lyde;
- uint32_t lzs;
- uint32_t lzde;
- uint32_t pad05[13];
- uint32_t pxdc;
- uint32_t pydc;
- uint32_t pzdc;
- uint32_t pad06[25];
- uint32_t rxs;
- uint32_t rys;
- uint32_t rsizex;
- uint32_t rsizey;
- uint32_t pad07[12];
- uint32_t saddr;
- uint32_t sstride;
- uint32_t srx;
- uint32_t sry;
- uint32_t daddr;
- uint32_t dstride;
- uint32_t drx;
- uint32_t dry;
- uint32_t brsizex;
- uint32_t brsizey;
- uint32_t tcolor;
- uint32_t pad08[93];
- uint32_t blpo;
- uint32_t pad09[7];
- uint32_t ctr;
- uint32_t ifsr;
- uint32_t ifcnt;
- uint32_t sst;
- uint32_t ds;
- uint32_t pst;
- uint32_t est;
- uint32_t pad10;
- uint32_t mdr0;
- uint32_t mdr1;
- uint32_t mdr2;
- uint32_t mdr3;
- uint32_t mdr4;
- uint32_t pad14[2];
- uint32_t mdr7;
- uint32_t fbr;
- uint32_t xres;
- uint32_t zbr;
- uint32_t tbr;
- uint32_t pfbr;
- uint32_t cxmin;
- uint32_t cxmax;
- uint32_t cymin;
- uint32_t cymax;
- uint32_t txs;
- uint32_t tis;
- uint32_t toa;
- uint32_t sho;
- uint32_t abr;
- uint32_t pad15[2];
- uint32_t fc;
- uint32_t bc;
- uint32_t alf;
- uint32_t blp;
- uint32_t pad16;
- uint32_t tbc;
- uint32_t pad11[42];
- uint32_t lx0dc;
- uint32_t ly0dc;
- uint32_t lx1dc;
- uint32_t ly1dc;
- uint32_t pad12[12];
- uint32_t x0dc;
- uint32_t y0dc;
- uint32_t x1dc;
- uint32_t y1dc;
- uint32_t x2dc;
- uint32_t y2dc;
- uint32_t pad13[666];
-};
-
-/* mb86r0x gdc geometry engine */
-struct mb86r0x_gdc_geom {
- uint32_t gctr;
- uint32_t pad00[15];
- uint32_t gmdr0;
- uint32_t gmdr1;
- uint32_t gmdr2;
- uint32_t pad01[237];
- uint32_t dfifog;
- uint32_t pad02[767];
-};
-
-/* mb86r0x gdc */
-struct mb86r0x_gdc {
- uint32_t pad00[2];
- uint32_t lts;
- uint32_t pad01;
- uint32_t lsta;
- uint32_t pad02[3];
- uint32_t ist;
- uint32_t imask;
- uint32_t pad03[6];
- uint32_t lsa;
- uint32_t lco;
- uint32_t lreq;
-
- uint32_t pad04[16*1024 - 19];
- struct mb86r0x_gdc_dsp dsp0;
- struct mb86r0x_gdc_dsp dsp1;
- uint32_t pad05[4*1024 - 2];
- uint32_t vccc;
- uint32_t vcsr;
- struct mb86r0x_gdc_cap cap0;
- struct mb86r0x_gdc_cap cap1;
- uint32_t pad06[4*1024];
- uint32_t texture_base[16*1024];
- struct mb86r0x_gdc_draw draw;
- uint32_t pad07[7*1024];
- struct mb86r0x_gdc_geom geom;
- uint32_t pad08[7*1024];
-};
-
-/* mb86r0x ddr2c */
-struct mb86r0x_ddr2c {
- uint16_t dric;
- uint16_t dric1;
- uint16_t dric2;
- uint16_t drca;
- uint16_t drcm;
- uint16_t drcst1;
- uint16_t drcst2;
- uint16_t drcr;
- uint16_t pad00[8];
- uint16_t drcf;
- uint16_t pad01[7];
- uint16_t drasr;
- uint16_t pad02[15];
- uint16_t drims;
- uint16_t pad03[7];
- uint16_t dros;
- uint16_t pad04;
- uint16_t dribsodt1;
- uint16_t dribsocd;
- uint16_t dribsocd2;
- uint16_t pad05[3];
- uint16_t droaba;
- uint16_t pad06[9];
- uint16_t drobs;
- uint16_t pad07[5];
- uint16_t drimr1;
- uint16_t drimr2;
- uint16_t drimr3;
- uint16_t drimr4;
- uint16_t droisr1;
- uint16_t droisr2;
-};
-
-/* mb86r0x memc */
-struct mb86r0x_memc {
- uint32_t mcfmode[8];
- uint32_t mcftim[8];
- uint32_t mcfarea[8];
-};
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Physical Address Defines
- */
-#define MB86R0x_DDR2_BASE 0xf3000000
-#define MB86R0x_GDC_BASE 0xf1fc0000
-#define MB86R0x_CCNT_BASE 0xfff42000
-#define MB86R0x_CAN0_BASE 0xfff54000
-#define MB86R0x_CAN1_BASE 0xfff55000
-#define MB86R0x_I2C0_BASE 0xfff56000
-#define MB86R0x_I2C1_BASE 0xfff57000
-#define MB86R0x_EHCI_BASE 0xfff80000
-#define MB86R0x_OHCI_BASE 0xfff81000
-#define MB86R0x_IRC1_BASE 0xfffb0000
-#define MB86R0x_MEMC_BASE 0xfffc0000
-#define MB86R0x_TIMER_BASE 0xfffe0000
-#define MB86R0x_UART0_BASE 0xfffe1000
-#define MB86R0x_UART1_BASE 0xfffe2000
-#define MB86R0x_IRCE_BASE 0xfffe4000
-#define MB86R0x_CRG_BASE 0xfffe7000
-#define MB86R0x_IRC0_BASE 0xfffe8000
-#define MB86R0x_GPIO_BASE 0xfffe9000
-#define MB86R0x_PWM0_BASE 0xfff41000
-#define MB86R0x_PWM1_BASE 0xfff41100
-
-#define MB86R0x_CRSR_SWRSTREQ (1 << 1)
-
-/*
- * Timer register bits
- */
-#define MB86R0x_TIMER_ENABLE (1 << 7)
-#define MB86R0x_TIMER_MODE_MSK (1 << 6)
-#define MB86R0x_TIMER_MODE_FR (0 << 6)
-#define MB86R0x_TIMER_MODE_PD (1 << 6)
-
-#define MB86R0x_TIMER_INT_EN (1 << 5)
-#define MB86R0x_TIMER_PRS_MSK (3 << 2)
-#define MB86R0x_TIMER_PRS_4S (1 << 2)
-#define MB86R0x_TIMER_PRS_8S (1 << 3)
-#define MB86R0x_TIMER_SIZE_32 (1 << 1)
-#define MB86R0x_TIMER_ONE_SHT (1 << 0)
-
-/*
- * Clock reset generator bits
- */
-#define MB86R0x_CRG_CRPR_PLLRDY (1 << 8)
-#define MB86R0x_CRG_CRPR_PLLMODE (0x1f << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X49 (0 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X46 (1 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X37 (2 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X20 (3 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X47 (4 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X44 (5 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X36 (6 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X19 (7 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X39 (8 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X38 (9 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X30 (10 << 0)
-#define MB86R0x_CRG_CRPR_PLLMODE_X15 (11 << 0)
-/*
- * DDR2 controller bits
- */
-#define MB86R0x_DDR2_DRCI_DRINI (1 << 15)
-#define MB86R0x_DDR2_DRCI_CKEN (1 << 14)
-#define MB86R0x_DDR2_DRCI_DRCMD (1 << 0)
-#define MB86R0x_DDR2_DRCI_CMD (MB86R0x_DDR2_DRCI_DRINI | \
- MB86R0x_DDR2_DRCI_CKEN | \
- MB86R0x_DDR2_DRCI_DRCMD)
-#define MB86R0x_DDR2_DRCI_INIT (MB86R0x_DDR2_DRCI_DRINI | \
- MB86R0x_DDR2_DRCI_CKEN)
-#define MB86R0x_DDR2_DRCI_NORMAL MB86R0x_DDR2_DRCI_CKEN
-#endif /* MB86R0X_H */
diff --git a/arch/arm/include/asm/arch-pantheon/config.h b/arch/arm/include/asm/arch-pantheon/config.h
deleted file mode 100644
index 1eed7b1..0000000
--- a/arch/arm/include/asm/arch-pantheon/config.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PANTHEON_CONFIG_H
-#define _PANTHEON_CONFIG_H
-
-#include <asm/arch/pantheon.h>
-
-/* default Dcache Line length for pantheon */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */
-#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */
-#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */
-#define MV_MFPR_BASE PANTHEON_MFPR_BASE
-#define MV_UART_CONSOLE_BASE PANTHEON_UART1_BASE
-#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register
- represents UART Unit Enable */
-/*
- * I2C definition
- */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MV 1
-#define CONFIG_MV_I2C_REG 0xd4011000
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 0
-#define CONFIG_SYS_I2C_SLAVE 0xfe
-#endif
-
-/*
- * MMC definition
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT 1
-#define CONFIG_MMC 1
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_SDHCI 1
-#define CONFIG_MMC_SDHCI_IO_ACCESSORS 1
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 0x1000
-#define CONFIG_MMC_SDMA 1
-#define CONFIG_MV_SDHCI 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_EFI_PARTITION 1
-#define CONFIG_SYS_MMC_NUM 2
-#define CONFIG_SYS_MMC_BASE {0xD4280000, 0xd4281000}
-#endif
-
-#endif /* _PANTHEON_CONFIG_H */
diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h
deleted file mode 100644
index 3ccdf8a..0000000
--- a/arch/arm/include/asm/arch-pantheon/cpu.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PANTHEON_CPU_H
-#define _PANTHEON_CPU_H
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-/*
- * Main Power Management (MPMU) Registers
- * Refer Register Datasheet 9.1
- */
-struct panthmpmu_registers {
- u8 pad0[0x0024];
- u32 ccgr; /*0x0024*/
- u8 pad1[0x0200 - 0x024 - 4];
- u32 wdtpcr; /*0x0200*/
- u8 pad2[0x1020 - 0x200 - 4];
- u32 aprr; /*0x1020*/
- u32 acgr; /*0x1024*/
-};
-
-/*
- * Application Power Management (APMU) Registers
- * Refer Register Datasheet 9.2
- */
-struct panthapmu_registers {
- u8 pad0[0x0054];
- u32 sd1; /*0x0054*/
- u8 pad1[0x00e0 - 0x054 - 4];
- u32 sd3; /*0x00e0*/
-};
-
-/*
- * APB Clock Reset/Control Registers
- * Refer Register Datasheet 6.14
- */
-struct panthapb_registers {
- u32 uart0; /*0x000*/
- u32 uart1; /*0x004*/
- u32 gpio; /*0x008*/
- u8 pad0[0x02c - 0x08 - 4];
- u32 twsi; /*0x02c*/
- u8 pad1[0x034 - 0x2c - 4];
- u32 timers; /*0x034*/
-};
-
-/*
- * CPU Interface Registers
- * Refer Register Datasheet 4.3
- */
-struct panthcpu_registers {
- u32 chip_id; /* Chip Id Reg */
- u32 pad;
- u32 cpu_conf; /* CPU Conf Reg */
- u32 pad1;
- u32 cpu_sram_spd; /* CPU SRAM Speed Reg */
- u32 pad2;
- u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */
- u32 mcb_conf; /* MCB Conf Reg */
- u32 sys_boot_ctl; /* Sytem Boot Control */
-};
-
-/*
- * Functions
- */
-u32 panth_sdram_base(int);
-u32 panth_sdram_size(int);
-int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks);
-
-#endif /* _PANTHEON_CPU_H */
diff --git a/arch/arm/include/asm/arch-pantheon/gpio.h b/arch/arm/include/asm/arch-pantheon/gpio.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/include/asm/arch-pantheon/gpio.h
+++ /dev/null
diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h
deleted file mode 100644
index 7909d53..0000000
--- a/arch/arm/include/asm/arch-pantheon/mfp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Based on arch/arm/include/asm/arch-armada100/mfp.h
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PANTHEON_MFP_H
-#define __PANTHEON_MFP_H
-
-/*
- * Frequently used MFP Configuration macros for all PANTHEON family of SoCs
- *
- * offset, pull,pF, drv,dF, edge,eF ,afn,aF
- */
-/* UART2 */
-#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM)
-#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM)
-#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-
-/* More macros can be defined here... */
-#define MFP_MMC1_DAT7 (MFP_REG(0x84) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP_MMC1_DAT6 (MFP_REG(0x88) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP_MMC1_DAT5 (MFP_REG(0x8c) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP_MMC1_DAT4 (MFP_REG(0x90) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP_MMC1_DAT3 (MFP_REG(0x94) | MFP_AF0 | MFP_DRIVE_FAST)
-#define MFP_MMC1_DAT2 (MFP_REG(0x98) | MFP_AF0 | MFP_DRIVE_FAST)
-#define MFP_MMC1_DAT1 (MFP_REG(0x9c) | MFP_AF0 | MFP_DRIVE_FAST)
-#define MFP_MMC1_DAT0 (MFP_REG(0xa0) | MFP_AF0 | MFP_DRIVE_FAST)
-#define MFP_MMC1_CMD (MFP_REG(0xa4) | MFP_AF0 | MFP_DRIVE_FAST)
-#define MFP_MMC1_CLK (MFP_REG(0xa8) | MFP_AF0 | MFP_DRIVE_FAST)
-#define MFP_MMC1_CD (MFP_REG(0xac) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-#define MFP_MMC1_WP (MFP_REG(0xb0) | MFP_AF0 | MFP_DRIVE_MEDIUM)
-
-#define MFP_PIN_MAX 117
-#endif
diff --git a/arch/arm/include/asm/arch-pantheon/pantheon.h b/arch/arm/include/asm/arch-pantheon/pantheon.h
deleted file mode 100644
index c3a71bf..0000000
--- a/arch/arm/include/asm/arch-pantheon/pantheon.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PANTHEON_H
-#define _PANTHEON_H
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */
-#define APBC_FNCLK (1<<1) /* Functional Clock Enable */
-#define APBC_RST (1<<2) /* Reset Generation */
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
-
-/* Common APMU register bit definitions */
-#define APMU_PERI_CLK (1<<4) /* Peripheral Clock Enable */
-#define APMU_AXI_CLK (1<<3) /* AXI Clock Enable*/
-#define APMU_PERI_RST (1<<1) /* Peripheral Reset */
-#define APMU_AXI_RST (1<<0) /* AXI Reset */
-
-/* Register Base Addresses */
-#define PANTHEON_DRAM_BASE 0xB0000000
-#define PANTHEON_TIMER_BASE 0xD4014000
-#define PANTHEON_WD_TIMER_BASE 0xD4080000
-#define PANTHEON_APBC_BASE 0xD4015000
-#define PANTHEON_UART1_BASE 0xD4017000
-#define PANTHEON_UART2_BASE 0xD4018000
-#define PANTHEON_GPIO_BASE 0xD4019000
-#define PANTHEON_MFPR_BASE 0xD401E000
-#define PANTHEON_MPMU_BASE 0xD4050000
-#define PANTHEON_APMU_BASE 0xD4282800
-#define PANTHEON_CPU_BASE 0xD4282C00
-
-#endif /* _PANTHEON_H */
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
index d297ed0..c28ee05 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -144,7 +144,16 @@ struct sunxi_ccm_reg {
#define PLL1_CFG_DEFAULT 0xa1005000
+#if defined CONFIG_OLD_SUNXI_KERNEL_COMPAT && defined CONFIG_MACH_SUN5I
+/*
+ * Older linux-sunxi-3.4 kernels override our PLL6 setting with 300 MHz,
+ * halving the mbus frequency, so set it to 300 MHz ourselves and base the
+ * mbus divider on that.
+ */
+#define PLL6_CFG_DEFAULT 0xa1009900
+#else
#define PLL6_CFG_DEFAULT 0xa1009911
+#endif
/* nand clock */
#define NAND_CLK_SRC_OSC24 0
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
index 7ff43e6..aedd194 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -25,31 +25,7 @@
#endif
unsigned long sunxi_dram_init(void);
-
-/*
- * Wait up to 1s for value to be set in given part of reg.
- */
-static inline void mctl_await_completion(u32 *reg, u32 mask, u32 val)
-{
- unsigned long tmo = timer_get_us() + 1000000;
-
- while ((readl(reg) & mask) != val) {
- if (timer_get_us() > tmo)
- panic("Timeout initialising DRAM\n");
- }
-}
-
-/*
- * Test if memory at offset offset matches memory at begin of DRAM
- */
-static inline bool mctl_mem_matches(u32 offset)
-{
- /* Try to write different values to RAM at two addresses */
- writel(0, CONFIG_SYS_SDRAM_BASE);
- writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset);
- /* Check if the same value is actually observed when reading back */
- return readl(CONFIG_SYS_SDRAM_BASE) ==
- readl(CONFIG_SYS_SDRAM_BASE + offset);
-}
+void mctl_await_completion(u32 *reg, u32 mask, u32 val);
+bool mctl_mem_matches(u32 offset);
#endif /* _SUNXI_DRAM_H */
diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
index c3e636e..60a5bd8 100644
--- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
@@ -13,4 +13,14 @@
void sdelay(unsigned long);
+/* return_to_fel() - Return to BROM from SPL
+ *
+ * This returns back into the BROM after U-Boot SPL has performed its initial
+ * init. It uses the provided lr and sp to do so.
+ *
+ * @lr: BROM link register value (return address)
+ * @sp: BROM stack pointer
+ */
+void return_to_fel(uint32_t lr, uint32_t sp);
+
#endif
diff --git a/arch/arm/include/asm/arch-tnetv107x/clock.h b/arch/arm/include/asm/arch-tnetv107x/clock.h
deleted file mode 100644
index dfc3b1b..0000000
--- a/arch/arm/include/asm/arch-tnetv107x/clock.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * TNETV107X: Clock APIs
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H
-
-#define PSC_MDCTL_NEXT_SWRSTDISABLE 0x0
-#define PSC_MDCTL_NEXT_SYNCRST 0x1
-#define PSC_MDCTL_NEXT_DISABLE 0x2
-#define PSC_MDCTL_NEXT_ENABLE 0x3
-
-#define CONFIG_SYS_INT_OSC_FREQ 24000000
-
-#ifndef __ASSEMBLY__
-
-/* PLL identifiers */
-enum pll_type_e {
- SYS_PLL,
- TDM_PLL,
- ETH_PLL
-};
-
-/* PLL configuration data */
-struct pll_init_data {
- int pll;
- int internal_osc;
- unsigned long pll_freq;
- unsigned long div_freq[10];
-};
-
-void init_plls(int num_pll, struct pll_init_data *config);
-int lpsc_status(unsigned int mod);
-void lpsc_control(int mod, unsigned long state, int lrstz);
-unsigned long clk_get_rate(unsigned int clk);
-unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
-int clk_set_rate(unsigned int clk, unsigned long hz);
-
-static inline void clk_enable(unsigned int mod)
-{
- lpsc_control(mod, PSC_MDCTL_NEXT_ENABLE, -1);
-}
-
-static inline void clk_disable(unsigned int mod)
-{
- lpsc_control(mod, PSC_MDCTL_NEXT_DISABLE, -1);
-}
-
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h
deleted file mode 100644
index d458e0b..0000000
--- a/arch/arm/include/asm/arch-tnetv107x/hardware.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * TNETV107X: Hardware information
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sizes.h>
-
-#define ASYNC_EMIF_NUM_CS 4
-#define ASYNC_EMIF_MODE_NOR 0
-#define ASYNC_EMIF_MODE_NAND 1
-#define ASYNC_EMIF_MODE_ONENAND 2
-#define ASYNC_EMIF_PRESERVE -1
-
-struct async_emif_config {
- unsigned mode;
- unsigned select_strobe;
- unsigned extend_wait;
- unsigned wr_setup;
- unsigned wr_strobe;
- unsigned wr_hold;
- unsigned rd_setup;
- unsigned rd_strobe;
- unsigned rd_hold;
- unsigned turn_around;
- enum {
- ASYNC_EMIF_8 = 0,
- ASYNC_EMIF_16 = 1,
- ASYNC_EMIF_32 = 2,
- } width;
-};
-
-void init_async_emif(int num_cs, struct async_emif_config *config);
-
-int wdt_start(unsigned long msecs);
-int wdt_stop(void);
-int wdt_kick(void);
-
-#endif
-
-/* Chip configuration unlock codes and registers */
-#define TNETV107X_KICK0 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x38)
-#define TNETV107X_KICK1 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x3c)
-#define TNETV107X_PINMUX(n) (TNETV107X_CHIP_CONFIG_SYS_BASE+0x150+(n)*4)
-#define TNETV107X_KICK0_MAGIC 0x83e70b13
-#define TNETV107X_KICK1_MAGIC 0x95a4f1e0
-
-/* Module base addresses */
-#define TNETV107X_TPCC_BASE 0x01C00000
-#define TNETV107X_TPTC0_BASE 0x01C10000
-#define TNETV107X_TPTC1_BASE 0x01C10400
-#define TNETV107X_INTC_BASE 0x03000000
-#define TNETV107X_LCD_CONTROLLER_BASE 0x08030000
-#define TNETV107X_INTD_BASE 0x08038000
-#define TNETV107X_INTD_IPC_BASE 0x08038000
-#define TNETV107X_INTD_FAST_BASE 0x08039000
-#define TNETV107X_INTD_ASYNC_BASE 0x0803A000
-#define TNETV107X_INTD_SLOW_BASE 0x0803B000
-#define TNETV107X_PKA_BASE 0x08040000
-#define TNETV107X_RNG_BASE 0x08044000
-#define TNETV107X_TIMER0_BASE 0x08086500
-#define TNETV107X_TIMER1_BASE 0x08086600
-#define TNETV107X_WDT0_ARM_BASE 0x08086700
-#define TNETV107X_WDT1_DSP_BASE 0x08086800
-#define TNETV107X_CHIP_CONFIG_SYS_BASE 0x08087000
-#define TNETV107X_GPIO_BASE 0x08088000
-#define TNETV107X_UART1_BASE 0x08088400
-#define TNETV107X_TOUCHSCREEN_BASE 0x08088500
-#define TNETV107X_SDIO0_BASE 0x08088700
-#define TNETV107X_SDIO1_BASE 0x08088800
-#define TNETV107X_MDIO_BASE 0x08088900
-#define TNETV107X_KEYPAD_BASE 0x08088A00
-#define TNETV107X_SSP_BASE 0x08088C00
-#define TNETV107X_CLOCK_CONTROL_BASE 0x0808A000
-#define TNETV107X_PSC_BASE 0x0808B000
-#define TNETV107X_TDM0_BASE 0x08100000
-#define TNETV107X_TDM1_BASE 0x08100100
-#define TNETV107X_MCDMA_BASE 0x08108000
-#define TNETV107X_UART0_DMA_BASE 0x08108200
-#define TNETV107X_USBSS_BASE 0x08120000
-#define TNETV107X_VLYNQ_CONTROL_BASE 0x0810D000
-#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000
-#define TNETV107X_VLYNQ_MEM_MAP_BASE 0x0C000000
-#define TNETV107X_IMCOP_BASE 0x01CC0000
-#define TNETV107X_MBX_LITE_BASE 0x07000000
-#define TNETV107X_ETHSS_BASE 0x0803C000
-#define TNETV107X_CPSW_BASE 0x0803C000
-#define TNETV107X_SPF_BASE 0x0803C800
-#define TNETV107X_IOPU_ETHSS_BASE 0x0803D000
-#define TNETV107X_VTP_CNTRL_0 0x0803D800
-#define TNETV107X_VTP_CNTRL_1 0x0803D900
-#define TNETV107X_UART2_DMA_BASE 0x08108400
-#define TNETV107X_INTERNAL_MEMORY 0x20000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000
-#define TNETV107X_DDR_EMIF_DATA_BASE 0x80000000
-#define TNETV107X_DDR_EMIF_CONTROL_BASE 0x90000000
-
-/* LPSC module definitions */
-#define TNETV107X_LPSC_ARM 0
-#define TNETV107X_LPSC_GEM 1
-#define TNETV107X_LPSC_DDR2_PHY 2
-#define TNETV107X_LPSC_TPCC 3
-#define TNETV107X_LPSC_TPTC0 4
-#define TNETV107X_LPSC_TPTC1 5
-#define TNETV107X_LPSC_RAM 6
-#define TNETV107X_LPSC_MBX_LITE 7
-#define TNETV107X_LPSC_LCD 8
-#define TNETV107X_LPSC_ETHSS 9
-#define TNETV107X_LPSC_AEMIF 10
-#define TNETV107X_LPSC_CHIP_CFG 11
-#define TNETV107X_LPSC_TSC 12
-#define TNETV107X_LPSC_ROM 13
-#define TNETV107X_LPSC_UART2 14
-#define TNETV107X_LPSC_PKTSEC 15
-#define TNETV107X_LPSC_SECCTL 16
-#define TNETV107X_LPSC_KEYMGR 17
-#define TNETV107X_LPSC_KEYPAD 18
-#define TNETV107X_LPSC_GPIO 19
-#define TNETV107X_LPSC_MDIO 20
-#define TNETV107X_LPSC_SDIO0 21
-#define TNETV107X_LPSC_UART0 22
-#define TNETV107X_LPSC_UART1 23
-#define TNETV107X_LPSC_TIMER0 24
-#define TNETV107X_LPSC_TIMER1 25
-#define TNETV107X_LPSC_WDT_ARM 26
-#define TNETV107X_LPSC_WDT_DSP 27
-#define TNETV107X_LPSC_SSP 28
-#define TNETV107X_LPSC_TDM0 29
-#define TNETV107X_LPSC_VLYNQ 30
-#define TNETV107X_LPSC_MCDMA 31
-#define TNETV107X_LPSC_USB0 32
-#define TNETV107X_LPSC_TDM1 33
-#define TNETV107X_LPSC_DEBUGSS 34
-#define TNETV107X_LPSC_ETHSS_RGMII 35
-#define TNETV107X_LPSC_SYSTEM 36
-#define TNETV107X_LPSC_IMCOP 37
-#define TNETV107X_LPSC_SPARE 38
-#define TNETV107X_LPSC_SDIO1 39
-#define TNETV107X_LPSC_USB1 40
-#define TNETV107X_LPSC_USBSS 41
-#define TNETV107X_LPSC_DDR2_EMIF1_VRST 42
-#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST 43
-#define TNETV107X_LPSC_MAX 44
-
-/* Interrupt controller */
-#define INTC_GLB_EN (TNETV107X_INTC_BASE + 0x10)
-#define INTC_HINT_EN (TNETV107X_INTC_BASE + 0x1500)
-#define INTC_EN_CLR0 (TNETV107X_INTC_BASE + 0x380)
-
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-tnetv107x/mux.h b/arch/arm/include/asm/arch-tnetv107x/mux.h
deleted file mode 100644
index 3f832c4..0000000
--- a/arch/arm/include/asm/arch-tnetv107x/mux.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * TNETV107X: Pinmux APIs
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-struct pin_config {
- unsigned char reg_index;
- unsigned char mask_offset;
- unsigned char mode;
-};
-
-#define TNETV107X_MUX_CFG(reg, offset, mux_mode) \
- { reg, offset, mux_mode }
-
-int mux_select_pin(short index);
-int mux_select_pins(const short *pins);
-
-enum tnetv107x_pin_mux_index {
- TNETV107X_PIN_ASR_A00,
- TNETV107X_PIN_GPIO32,
- TNETV107X_PIN_ASR_A01,
- TNETV107X_PIN_GPIO33,
- TNETV107X_PIN_ASR_A02,
- TNETV107X_PIN_GPIO34,
- TNETV107X_PIN_ASR_A03,
- TNETV107X_PIN_GPIO35,
- TNETV107X_PIN_ASR_A04,
- TNETV107X_PIN_GPIO36,
- TNETV107X_PIN_ASR_A05,
- TNETV107X_PIN_GPIO37,
- TNETV107X_PIN_ASR_A06,
- TNETV107X_PIN_GPIO38,
- TNETV107X_PIN_ASR_A07,
- TNETV107X_PIN_GPIO39,
- TNETV107X_PIN_ASR_A08,
- TNETV107X_PIN_GPIO40,
- TNETV107X_PIN_ASR_A09,
- TNETV107X_PIN_GPIO41,
- TNETV107X_PIN_ASR_A10,
- TNETV107X_PIN_GPIO42,
- TNETV107X_PIN_ASR_A11,
- TNETV107X_PIN_BOOT_STRP_0,
- TNETV107X_PIN_ASR_A12,
- TNETV107X_PIN_BOOT_STRP_1,
- TNETV107X_PIN_ASR_A13,
- TNETV107X_PIN_GPIO43,
- TNETV107X_PIN_ASR_A14,
- TNETV107X_PIN_GPIO44,
- TNETV107X_PIN_ASR_A15,
- TNETV107X_PIN_GPIO45,
- TNETV107X_PIN_ASR_A16,
- TNETV107X_PIN_GPIO46,
- TNETV107X_PIN_ASR_A17,
- TNETV107X_PIN_GPIO47,
- TNETV107X_PIN_ASR_A18,
- TNETV107X_PIN_GPIO48,
- TNETV107X_PIN_SDIO1_DATA3_0,
- TNETV107X_PIN_ASR_A19,
- TNETV107X_PIN_GPIO49,
- TNETV107X_PIN_SDIO1_DATA2_0,
- TNETV107X_PIN_ASR_A20,
- TNETV107X_PIN_GPIO50,
- TNETV107X_PIN_SDIO1_DATA1_0,
- TNETV107X_PIN_ASR_A21,
- TNETV107X_PIN_GPIO51,
- TNETV107X_PIN_SDIO1_DATA0_0,
- TNETV107X_PIN_ASR_A22,
- TNETV107X_PIN_GPIO52,
- TNETV107X_PIN_SDIO1_CMD_0,
- TNETV107X_PIN_ASR_A23,
- TNETV107X_PIN_GPIO53,
- TNETV107X_PIN_SDIO1_CLK_0,
- TNETV107X_PIN_ASR_BA_1,
- TNETV107X_PIN_GPIO54,
- TNETV107X_PIN_SYS_PLL_CLK,
- TNETV107X_PIN_ASR_CS0,
- TNETV107X_PIN_ASR_CS1,
- TNETV107X_PIN_ASR_CS2,
- TNETV107X_PIN_TDM_PLL_CLK,
- TNETV107X_PIN_ASR_CS3,
- TNETV107X_PIN_ETH_PHY_CLK,
- TNETV107X_PIN_ASR_D00,
- TNETV107X_PIN_GPIO55,
- TNETV107X_PIN_ASR_D01,
- TNETV107X_PIN_GPIO56,
- TNETV107X_PIN_ASR_D02,
- TNETV107X_PIN_GPIO57,
- TNETV107X_PIN_ASR_D03,
- TNETV107X_PIN_GPIO58,
- TNETV107X_PIN_ASR_D04,
- TNETV107X_PIN_GPIO59_0,
- TNETV107X_PIN_ASR_D05,
- TNETV107X_PIN_GPIO60_0,
- TNETV107X_PIN_ASR_D06,
- TNETV107X_PIN_GPIO61_0,
- TNETV107X_PIN_ASR_D07,
- TNETV107X_PIN_GPIO62_0,
- TNETV107X_PIN_ASR_D08,
- TNETV107X_PIN_GPIO63_0,
- TNETV107X_PIN_ASR_D09,
- TNETV107X_PIN_GPIO64_0,
- TNETV107X_PIN_ASR_D10,
- TNETV107X_PIN_SDIO1_DATA3_1,
- TNETV107X_PIN_ASR_D11,
- TNETV107X_PIN_SDIO1_DATA2_1,
- TNETV107X_PIN_ASR_D12,
- TNETV107X_PIN_SDIO1_DATA1_1,
- TNETV107X_PIN_ASR_D13,
- TNETV107X_PIN_SDIO1_DATA0_1,
- TNETV107X_PIN_ASR_D14,
- TNETV107X_PIN_SDIO1_CMD_1,
- TNETV107X_PIN_ASR_D15,
- TNETV107X_PIN_SDIO1_CLK_1,
- TNETV107X_PIN_ASR_OE,
- TNETV107X_PIN_BOOT_STRP_2,
- TNETV107X_PIN_ASR_RNW,
- TNETV107X_PIN_GPIO29_0,
- TNETV107X_PIN_ASR_WAIT,
- TNETV107X_PIN_GPIO30_0,
- TNETV107X_PIN_ASR_WE,
- TNETV107X_PIN_BOOT_STRP_3,
- TNETV107X_PIN_ASR_WE_DQM0,
- TNETV107X_PIN_GPIO31,
- TNETV107X_PIN_LCD_PD17_0,
- TNETV107X_PIN_ASR_WE_DQM1,
- TNETV107X_PIN_ASR_BA0_0,
- TNETV107X_PIN_VLYNQ_CLK,
- TNETV107X_PIN_GPIO14,
- TNETV107X_PIN_LCD_PD19_0,
- TNETV107X_PIN_VLYNQ_RXD0,
- TNETV107X_PIN_GPIO15,
- TNETV107X_PIN_LCD_PD20_0,
- TNETV107X_PIN_VLYNQ_RXD1,
- TNETV107X_PIN_GPIO16,
- TNETV107X_PIN_LCD_PD21_0,
- TNETV107X_PIN_VLYNQ_TXD0,
- TNETV107X_PIN_GPIO17,
- TNETV107X_PIN_LCD_PD22_0,
- TNETV107X_PIN_VLYNQ_TXD1,
- TNETV107X_PIN_GPIO18,
- TNETV107X_PIN_LCD_PD23_0,
- TNETV107X_PIN_SDIO0_CLK,
- TNETV107X_PIN_GPIO19,
- TNETV107X_PIN_SDIO0_CMD,
- TNETV107X_PIN_GPIO20,
- TNETV107X_PIN_SDIO0_DATA0,
- TNETV107X_PIN_GPIO21,
- TNETV107X_PIN_SDIO0_DATA1,
- TNETV107X_PIN_GPIO22,
- TNETV107X_PIN_SDIO0_DATA2,
- TNETV107X_PIN_GPIO23,
- TNETV107X_PIN_SDIO0_DATA3,
- TNETV107X_PIN_GPIO24,
- TNETV107X_PIN_EMU0,
- TNETV107X_PIN_EMU1,
- TNETV107X_PIN_RTCK,
- TNETV107X_PIN_TRST_N,
- TNETV107X_PIN_TCK,
- TNETV107X_PIN_TDI,
- TNETV107X_PIN_TDO,
- TNETV107X_PIN_TMS,
- TNETV107X_PIN_TDM1_CLK,
- TNETV107X_PIN_TDM1_RX,
- TNETV107X_PIN_TDM1_TX,
- TNETV107X_PIN_TDM1_FS,
- TNETV107X_PIN_KEYPAD_R0,
- TNETV107X_PIN_KEYPAD_R1,
- TNETV107X_PIN_KEYPAD_R2,
- TNETV107X_PIN_KEYPAD_R3,
- TNETV107X_PIN_KEYPAD_R4,
- TNETV107X_PIN_KEYPAD_R5,
- TNETV107X_PIN_KEYPAD_R6,
- TNETV107X_PIN_GPIO12,
- TNETV107X_PIN_KEYPAD_R7,
- TNETV107X_PIN_GPIO10,
- TNETV107X_PIN_KEYPAD_C0,
- TNETV107X_PIN_KEYPAD_C1,
- TNETV107X_PIN_KEYPAD_C2,
- TNETV107X_PIN_KEYPAD_C3,
- TNETV107X_PIN_KEYPAD_C4,
- TNETV107X_PIN_KEYPAD_C5,
- TNETV107X_PIN_KEYPAD_C6,
- TNETV107X_PIN_GPIO13,
- TNETV107X_PIN_TEST_CLK_IN,
- TNETV107X_PIN_KEYPAD_C7,
- TNETV107X_PIN_GPIO11,
- TNETV107X_PIN_SSP0_0,
- TNETV107X_PIN_SCC_DCLK,
- TNETV107X_PIN_LCD_PD20_1,
- TNETV107X_PIN_SSP0_1,
- TNETV107X_PIN_SCC_CS_N,
- TNETV107X_PIN_LCD_PD21_1,
- TNETV107X_PIN_SSP0_2,
- TNETV107X_PIN_SCC_D,
- TNETV107X_PIN_LCD_PD22_1,
- TNETV107X_PIN_SSP0_3,
- TNETV107X_PIN_SCC_RESETN,
- TNETV107X_PIN_LCD_PD23_1,
- TNETV107X_PIN_SSP1_0,
- TNETV107X_PIN_GPIO25,
- TNETV107X_PIN_UART2_CTS,
- TNETV107X_PIN_SSP1_1,
- TNETV107X_PIN_GPIO26,
- TNETV107X_PIN_UART2_RD,
- TNETV107X_PIN_SSP1_2,
- TNETV107X_PIN_GPIO27,
- TNETV107X_PIN_UART2_RTS,
- TNETV107X_PIN_SSP1_3,
- TNETV107X_PIN_GPIO28,
- TNETV107X_PIN_UART2_TD,
- TNETV107X_PIN_UART0_CTS,
- TNETV107X_PIN_UART0_RD,
- TNETV107X_PIN_UART0_RTS,
- TNETV107X_PIN_UART0_TD,
- TNETV107X_PIN_UART1_RD,
- TNETV107X_PIN_UART1_TD,
- TNETV107X_PIN_LCD_AC_NCS,
- TNETV107X_PIN_LCD_HSYNC_RNW,
- TNETV107X_PIN_LCD_VSYNC_A0,
- TNETV107X_PIN_LCD_MCLK,
- TNETV107X_PIN_LCD_PD16_0,
- TNETV107X_PIN_LCD_PCLK_E,
- TNETV107X_PIN_LCD_PD00,
- TNETV107X_PIN_LCD_PD01,
- TNETV107X_PIN_LCD_PD02,
- TNETV107X_PIN_LCD_PD03,
- TNETV107X_PIN_LCD_PD04,
- TNETV107X_PIN_LCD_PD05,
- TNETV107X_PIN_LCD_PD06,
- TNETV107X_PIN_LCD_PD07,
- TNETV107X_PIN_LCD_PD08,
- TNETV107X_PIN_GPIO59_1,
- TNETV107X_PIN_LCD_PD09,
- TNETV107X_PIN_GPIO60_1,
- TNETV107X_PIN_LCD_PD10,
- TNETV107X_PIN_ASR_BA0_1,
- TNETV107X_PIN_GPIO61_1,
- TNETV107X_PIN_LCD_PD11,
- TNETV107X_PIN_GPIO62_1,
- TNETV107X_PIN_LCD_PD12,
- TNETV107X_PIN_GPIO63_1,
- TNETV107X_PIN_LCD_PD13,
- TNETV107X_PIN_GPIO64_1,
- TNETV107X_PIN_LCD_PD14,
- TNETV107X_PIN_GPIO29_1,
- TNETV107X_PIN_LCD_PD15,
- TNETV107X_PIN_GPIO30_1,
- TNETV107X_PIN_EINT0,
- TNETV107X_PIN_GPIO08,
- TNETV107X_PIN_EINT1,
- TNETV107X_PIN_GPIO09,
- TNETV107X_PIN_GPIO00,
- TNETV107X_PIN_LCD_PD20_2,
- TNETV107X_PIN_TDM_CLK_IN_2,
- TNETV107X_PIN_GPIO01,
- TNETV107X_PIN_LCD_PD21_2,
- TNETV107X_PIN_24M_CLK_OUT_1,
- TNETV107X_PIN_GPIO02,
- TNETV107X_PIN_LCD_PD22_2,
- TNETV107X_PIN_GPIO03,
- TNETV107X_PIN_LCD_PD23_2,
- TNETV107X_PIN_GPIO04,
- TNETV107X_PIN_LCD_PD16_1,
- TNETV107X_PIN_USB0_RXERR,
- TNETV107X_PIN_GPIO05,
- TNETV107X_PIN_LCD_PD17_1,
- TNETV107X_PIN_TDM_CLK_IN_1,
- TNETV107X_PIN_GPIO06,
- TNETV107X_PIN_LCD_PD18,
- TNETV107X_PIN_24M_CLK_OUT_2,
- TNETV107X_PIN_GPIO07,
- TNETV107X_PIN_LCD_PD19_1,
- TNETV107X_PIN_USB1_RXERR,
- TNETV107X_PIN_ETH_PLL_CLK,
- TNETV107X_PIN_MDIO,
- TNETV107X_PIN_MDC,
- TNETV107X_PIN_AIC_MUTE_STAT_N,
- TNETV107X_PIN_TDM0_CLK,
- TNETV107X_PIN_AIC_HNS_EN_N,
- TNETV107X_PIN_TDM0_FS,
- TNETV107X_PIN_AIC_HDS_EN_STAT_N,
- TNETV107X_PIN_TDM0_TX,
- TNETV107X_PIN_AIC_HNF_EN_STAT_N,
- TNETV107X_PIN_TDM0_RX,
-};
-
-#endif
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index 4b7b67b..4b9cb52 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -65,7 +65,8 @@
/*
* Section
*/
-#define PMD_SECT_S (3 << 8)
+#define PMD_SECT_OUTER_SHARE (2 << 8)
+#define PMD_SECT_INNER_SHARE (3 << 8)
#define PMD_SECT_AF (1 << 10)
#define PMD_SECT_NG (1 << 11)
#define PMD_SECT_PXN (UL(1) << 53)
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 342f045..7a545ea 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -1149,6 +1149,7 @@ struct emif_regs {
u32 sdram_config;
u32 sdram_config2;
u32 ref_ctrl;
+ u32 ref_ctrl_final;
u32 sdram_tim1;
u32 sdram_tim2;
u32 sdram_tim3;
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 438f128..bb24f33 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -48,6 +48,9 @@ struct arch_global_data {
#ifdef CONFIG_OMAP
struct omap_boot_parameters omap_boot_params;
#endif
+#ifdef CONFIG_FSL_LSCH3
+ unsigned long mem2_clk;
+#endif
};
#include <asm-generic/global_data.h>
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 8acd7cd..17b6f54 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -26,10 +26,14 @@ enum {
BOOT_DEVICE_SPI,
BOOT_DEVICE_SATA,
BOOT_DEVICE_I2C,
+ BOOT_DEVICE_BOARD,
BOOT_DEVICE_NONE
};
#endif
+/* Board-specific load method */
+void spl_board_load_image(void);
+
/* Linker symbols. */
extern char __bss_start[], __bss_end[];
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 89f2294..2a5bed2 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -70,6 +70,7 @@ void __asm_invalidate_dcache_all(void);
void __asm_flush_dcache_range(u64 start, u64 end);
void __asm_invalidate_tlb_all(void);
void __asm_invalidate_icache_all(void);
+int __asm_flush_l3_cache(void);
void armv8_switch_to_el2(void);
void armv8_switch_to_el1(void);
@@ -142,6 +143,21 @@ void flush_l3_cache(void);
#ifndef __ASSEMBLY__
+/**
+ * save_boot_params() - Save boot parameters before starting reset sequence
+ *
+ * If you provide this function it will be called immediately U-Boot starts,
+ * both for SPL and U-Boot proper.
+ *
+ * All registers are unchanged from U-Boot entry. No registers need be
+ * preserved.
+ *
+ * This is not a normal C function. There is no stack. Return by branching to
+ * save_boot_params_ret.
+ *
+ * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
+ */
+
#define isb() __asm__ __volatile__ ("" : : : "memory")
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index d74e4b8..da8ed72 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -35,6 +35,7 @@ endif
obj-$(CONFIG_SEMIHOSTING) += semihosting.o
obj-y += sections.o
+obj-y += stack.o
ifdef CONFIG_ARM64
obj-y += gic_64.o
obj-y += interrupts_64.o
diff --git a/arch/arm/lib/asm-offsets.c b/arch/arm/lib/asm-offsets.c
index b0c26e5..e5bcaea 100644
--- a/arch/arm/lib/asm-offsets.c
+++ b/arch/arm/lib/asm-offsets.c
@@ -15,9 +15,6 @@
#include <common.h>
#include <linux/kbuild.h>
-#if defined(CONFIG_MB86R0x)
-#include <asm/arch/mb86r0x.h>
-#endif
#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) \
|| defined(CONFIG_MX51) || defined(CONFIG_MX53)
#include <asm/arch/imx-regs.h>
@@ -27,8 +24,6 @@ int main(void)
{
/*
* TODO : Check if each entry in this file is really necessary.
- * - struct mb86r0x_ddr2
- * - struct mb86r0x_memc
* - struct esdramc_regs
* - struct max_regs
* - struct aips_regs
@@ -40,47 +35,6 @@ int main(void)
* code. Is it better to define the macros directly in headers?
*/
-#if defined(CONFIG_MB86R0x)
- /* ddr2 controller */
- DEFINE(DDR2_DRIC, offsetof(struct mb86r0x_ddr2c, dric));
- DEFINE(DDR2_DRIC1, offsetof(struct mb86r0x_ddr2c, dric1));
- DEFINE(DDR2_DRIC2, offsetof(struct mb86r0x_ddr2c, dric2));
- DEFINE(DDR2_DRCA, offsetof(struct mb86r0x_ddr2c, drca));
- DEFINE(DDR2_DRCM, offsetof(struct mb86r0x_ddr2c, drcm));
- DEFINE(DDR2_DRCST1, offsetof(struct mb86r0x_ddr2c, drcst1));
- DEFINE(DDR2_DRCST2, offsetof(struct mb86r0x_ddr2c, drcst2));
- DEFINE(DDR2_DRCR, offsetof(struct mb86r0x_ddr2c, drcr));
- DEFINE(DDR2_DRCF, offsetof(struct mb86r0x_ddr2c, drcf));
- DEFINE(DDR2_DRASR, offsetof(struct mb86r0x_ddr2c, drasr));
- DEFINE(DDR2_DRIMS, offsetof(struct mb86r0x_ddr2c, drims));
- DEFINE(DDR2_DROS, offsetof(struct mb86r0x_ddr2c, dros));
- DEFINE(DDR2_DRIBSODT1, offsetof(struct mb86r0x_ddr2c, dribsodt1));
- DEFINE(DDR2_DROABA, offsetof(struct mb86r0x_ddr2c, droaba));
- DEFINE(DDR2_DROBS, offsetof(struct mb86r0x_ddr2c, drobs));
-
- /* clock reset generator */
- DEFINE(CRG_CRPR, offsetof(struct mb86r0x_crg, crpr));
- DEFINE(CRG_CRHA, offsetof(struct mb86r0x_crg, crha));
- DEFINE(CRG_CRPA, offsetof(struct mb86r0x_crg, crpa));
- DEFINE(CRG_CRPB, offsetof(struct mb86r0x_crg, crpb));
- DEFINE(CRG_CRHB, offsetof(struct mb86r0x_crg, crhb));
- DEFINE(CRG_CRAM, offsetof(struct mb86r0x_crg, cram));
-
- /* chip control module */
- DEFINE(CCNT_CDCRC, offsetof(struct mb86r0x_ccnt, cdcrc));
-
- /* external bus interface */
- DEFINE(MEMC_MCFMODE0, offsetof(struct mb86r0x_memc, mcfmode[0]));
- DEFINE(MEMC_MCFMODE2, offsetof(struct mb86r0x_memc, mcfmode[2]));
- DEFINE(MEMC_MCFMODE4, offsetof(struct mb86r0x_memc, mcfmode[4]));
- DEFINE(MEMC_MCFTIM0, offsetof(struct mb86r0x_memc, mcftim[0]));
- DEFINE(MEMC_MCFTIM2, offsetof(struct mb86r0x_memc, mcftim[2]));
- DEFINE(MEMC_MCFTIM4, offsetof(struct mb86r0x_memc, mcftim[4]));
- DEFINE(MEMC_MCFAREA0, offsetof(struct mb86r0x_memc, mcfarea[0]));
- DEFINE(MEMC_MCFAREA2, offsetof(struct mb86r0x_memc, mcfarea[2]));
- DEFINE(MEMC_MCFAREA4, offsetof(struct mb86r0x_memc, mcfarea[4]));
-#endif
-
#if defined(CONFIG_MX25)
/* Clock Control Module */
DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl));
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 0c1298a..2d6b676 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -191,7 +191,7 @@ __weak void setup_board_tags(struct tag **in_params) {}
static void do_nonsec_virt_switch(void)
{
smp_kick_all_cpus();
- flush_dcache_all(); /* flush cache before swtiching to EL2 */
+ dcache_disable(); /* flush cache before swtiching to EL2 */
armv8_switch_to_el2();
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
armv8_switch_to_el1();
diff --git a/arch/arm/lib/stack.c b/arch/arm/lib/stack.c
new file mode 100644
index 0000000..cf10a53
--- /dev/null
+++ b/arch/arm/lib/stack.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2015 Andreas Bießmann <andreas.devel@googlemail.com>
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2002-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_reserve_stacks(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ gd->start_addr_sp -= 128; /* leave 32 words for abort-stack */
+ gd->irq_sp = gd->start_addr_sp;
+#else
+ /* setup stack pointer for exceptions */
+ gd->irq_sp = gd->start_addr_sp;
+
+# if !defined(CONFIG_ARM64)
+# ifdef CONFIG_USE_IRQ
+ gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
+ debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+ CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
+
+ /* 8-byte alignment for ARM ABI compliance */
+ gd->start_addr_sp &= ~0x07;
+# endif
+ /* leave 3 words for abort-stack, plus 1 for alignment */
+ gd->start_addr_sp -= 16;
+# endif
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
new file mode 100644
index 0000000..30945c1
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig
@@ -0,0 +1,168 @@
+if ARCH_AT91
+
+choice
+ prompt "Atmel AT91 board select"
+
+config TARGET_AT91RM9200EK
+ bool "Atmel AT91RM9200 evaluation kit"
+ select CPU_ARM920T
+
+config TARGET_EB_CPUX9K2
+ bool "Support eb_cpux9k2"
+ select CPU_ARM920T
+
+config TARGET_CPUAT91
+ bool "Support cpuat91"
+ select CPU_ARM920T
+
+config TARGET_AT91SAM9260EK
+ bool "Atmel at91sam9260 reference board"
+ select CPU_ARM926EJS
+
+config TARGET_ETHERNUT5
+ bool "Ethernut5 board"
+ select CPU_ARM926EJS
+
+config TARGET_TNY_A9260
+ bool "Caloa TNY A9260 board"
+ select CPU_ARM926EJS
+
+config TARGET_SNAPPER9260
+ bool "Support snapper9260"
+ select CPU_ARM926EJS
+
+config TARGET_AFEB9260
+ bool "Support afeb9260"
+ select CPU_ARM926EJS
+
+config TARGET_AT91SAM9261EK
+ bool "Atmel at91sam9261 reference board"
+ select CPU_ARM926EJS
+
+config TARGET_PM9261
+ bool "Ronetix pm9261 board"
+ select CPU_ARM926EJS
+
+config TARGET_AT91SAM9263EK
+ bool "Atmel at91sam9263 reference board"
+ select CPU_ARM926EJS
+
+config TARGET_USB_A9263
+ bool "Caloa USB A9260 board"
+ select CPU_ARM926EJS
+
+config TARGET_PM9263
+ bool "Ronetix pm9263 board"
+ select CPU_ARM926EJS
+
+config TARGET_SBC35_A9G20
+ bool "Support sbc35_a9g20"
+ select CPU_ARM926EJS
+
+config TARGET_STAMP9G20
+ bool "Support stamp9g20"
+ select CPU_ARM926EJS
+
+config TARGET_AT91SAM9M10G45EK
+ bool "Atmel AT91SAM9M10G45-EK board"
+ select CPU_ARM926EJS
+
+config TARGET_PM9G45
+ bool "Ronetix pm9g45 board"
+ select CPU_ARM926EJS
+
+config TARGET_AT91SAM9N12EK
+ bool "Atmel AT91SAM9N12-EK board"
+ select CPU_ARM926EJS
+
+config TARGET_AT91SAM9RLEK
+ bool "Atmel at91sam9rl reference board"
+ select CPU_ARM926EJS
+
+config TARGET_AT91SAM9X5EK
+ bool "Atmel AT91SAM9X5-EK board"
+ select CPU_ARM926EJS
+
+config TARGET_SAMA5D3_XPLAINED
+ bool "SAMA5D3 Xplained board"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_SAMA5D3XEK
+ bool "SAMA5D3X-EK board"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_SAMA5D4_XPLAINED
+ bool "SAMA5D4 Xplained board"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_SAMA5D4EK
+ bool "SAMA5D4 Evaluation Kit"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_VL_MA2SC
+ bool "Support vl_ma2sc"
+ select CPU_ARM926EJS
+
+config TARGET_MEESC
+ bool "Support meesc"
+ select CPU_ARM926EJS
+
+config TARGET_OTC570
+ bool "Support otc570"
+ select CPU_ARM926EJS
+
+config TARGET_CPU9260
+ bool "Support cpu9260"
+ select CPU_ARM926EJS
+
+config TARGET_CORVUS
+ bool "Support corvus"
+ select CPU_ARM926EJS
+ select SUPPORT_SPL
+
+config TARGET_TAURUS
+ bool "Support taurus"
+ select CPU_ARM926EJS
+ select SUPPORT_SPL
+
+endchoice
+
+config SYS_SOC
+ default "at91"
+
+source "board/atmel/at91rm9200ek/Kconfig"
+source "board/atmel/at91sam9260ek/Kconfig"
+source "board/atmel/at91sam9261ek/Kconfig"
+source "board/atmel/at91sam9263ek/Kconfig"
+source "board/atmel/at91sam9m10g45ek/Kconfig"
+source "board/atmel/at91sam9n12ek/Kconfig"
+source "board/atmel/at91sam9rlek/Kconfig"
+source "board/atmel/at91sam9x5ek/Kconfig"
+source "board/atmel/sama5d3_xplained/Kconfig"
+source "board/atmel/sama5d3xek/Kconfig"
+source "board/atmel/sama5d4_xplained/Kconfig"
+source "board/atmel/sama5d4ek/Kconfig"
+source "board/BuS/eb_cpux9k2/Kconfig"
+source "board/eukrea/cpuat91/Kconfig"
+source "board/afeb9260/Kconfig"
+source "board/bluewater/snapper9260/Kconfig"
+source "board/BuS/vl_ma2sc/Kconfig"
+source "board/calao/sbc35_a9g20/Kconfig"
+source "board/calao/tny_a9260/Kconfig"
+source "board/calao/usb_a9263/Kconfig"
+source "board/egnite/ethernut5/Kconfig"
+source "board/esd/meesc/Kconfig"
+source "board/esd/otc570/Kconfig"
+source "board/eukrea/cpu9260/Kconfig"
+source "board/ronetix/pm9261/Kconfig"
+source "board/ronetix/pm9263/Kconfig"
+source "board/ronetix/pm9g45/Kconfig"
+source "board/siemens/corvus/Kconfig"
+source "board/siemens/taurus/Kconfig"
+source "board/taskit/stamp9g20/Kconfig"
+
+endif
diff --git a/arch/arm/cpu/at91-common/Makefile b/arch/arm/mach-at91/Makefile
index 03614d4..e596ba6 100644
--- a/arch/arm/cpu/at91-common/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,13 +1,3 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2013 Atmel Corporation
-# Bo Shen <voice.shen@atmel.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
ifneq ($(CONFIG_SPL_BUILD),)
obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
@@ -16,3 +6,7 @@ obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o
obj-y += spl.o
endif
+
+obj-$(CONFIG_CPU_ARM920T) += arm920t/
+obj-$(CONFIG_CPU_ARM926EJS) += arm926ejs/
+obj-$(CONFIG_CPU_V7) += armv7/
diff --git a/arch/arm/cpu/arm920t/at91/Makefile b/arch/arm/mach-at91/arm920t/Makefile
index 561b4b4..561b4b4 100644
--- a/arch/arm/cpu/arm920t/at91/Makefile
+++ b/arch/arm/mach-at91/arm920t/Makefile
diff --git a/arch/arm/cpu/arm920t/at91/at91rm9200_devices.c b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
index fc54327..fc54327 100644
--- a/arch/arm/cpu/arm920t/at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c
diff --git a/arch/arm/cpu/arm920t/at91/clock.c b/arch/arm/mach-at91/arm920t/clock.c
index 2813bf7..2813bf7 100644
--- a/arch/arm/cpu/arm920t/at91/clock.c
+++ b/arch/arm/mach-at91/arm920t/clock.c
diff --git a/arch/arm/cpu/arm920t/at91/cpu.c b/arch/arm/mach-at91/arm920t/cpu.c
index b0f411b..b0f411b 100644
--- a/arch/arm/cpu/arm920t/at91/cpu.c
+++ b/arch/arm/mach-at91/arm920t/cpu.c
diff --git a/arch/arm/cpu/arm920t/at91/lowlevel_init.S b/arch/arm/mach-at91/arm920t/lowlevel_init.S
index d2934a3..d2934a3 100644
--- a/arch/arm/cpu/arm920t/at91/lowlevel_init.S
+++ b/arch/arm/mach-at91/arm920t/lowlevel_init.S
diff --git a/arch/arm/cpu/arm920t/at91/reset.c b/arch/arm/mach-at91/arm920t/reset.c
index d47777a..d47777a 100644
--- a/arch/arm/cpu/arm920t/at91/reset.c
+++ b/arch/arm/mach-at91/arm920t/reset.c
diff --git a/arch/arm/cpu/arm920t/at91/timer.c b/arch/arm/mach-at91/arm920t/timer.c
index 6aa2994..6aa2994 100644
--- a/arch/arm/cpu/arm920t/at91/timer.c
+++ b/arch/arm/mach-at91/arm920t/timer.c
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile
index ddc323f..ddc323f 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/mach-at91/arm926ejs/Makefile
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
index efb53d6..efb53d6 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
index a445c75..a445c75 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
index 6b51d5f..6b51d5f 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
index 0e6c0da..0e6c0da 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
index 39f17a1..39f17a1 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
index 0ec32c3..0ec32c3 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
index 6d94572..6d94572 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c
index f363982..f363982 100644
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/mach-at91/arm926ejs/clock.c
diff --git a/arch/arm/cpu/arm926ejs/at91/cpu.c b/arch/arm/mach-at91/arm926ejs/cpu.c
index da1d359..da1d359 100644
--- a/arch/arm/cpu/arm926ejs/at91/cpu.c
+++ b/arch/arm/mach-at91/arm926ejs/cpu.c
diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/mach-at91/arm926ejs/eflash.c
index 3f39264..3f39264 100644
--- a/arch/arm/cpu/arm926ejs/at91/eflash.c
+++ b/arch/arm/mach-at91/arm926ejs/eflash.c
diff --git a/arch/arm/cpu/arm926ejs/at91/led.c b/arch/arm/mach-at91/arm926ejs/led.c
index b8d5c78..b8d5c78 100644
--- a/arch/arm/cpu/arm926ejs/at91/led.c
+++ b/arch/arm/mach-at91/arm926ejs/led.c
diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/mach-at91/arm926ejs/lowlevel_init.S
index a9ec81a..a9ec81a 100644
--- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
+++ b/arch/arm/mach-at91/arm926ejs/lowlevel_init.S
diff --git a/arch/arm/cpu/arm926ejs/at91/reset.c b/arch/arm/mach-at91/arm926ejs/reset.c
index e67f47b..e67f47b 100644
--- a/arch/arm/cpu/arm926ejs/at91/reset.c
+++ b/arch/arm/mach-at91/arm926ejs/reset.c
diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/mach-at91/arm926ejs/timer.c
index b0b7fb9..b0b7fb9 100644
--- a/arch/arm/cpu/arm926ejs/at91/timer.c
+++ b/arch/arm/mach-at91/arm926ejs/timer.c
diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/mach-at91/armv7/Makefile
index f4f35a4..f4f35a4 100644
--- a/arch/arm/cpu/armv7/at91/Makefile
+++ b/arch/arm/mach-at91/armv7/Makefile
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/mach-at91/armv7/clock.c
index 0bf453e..0bf453e 100644
--- a/arch/arm/cpu/armv7/at91/clock.c
+++ b/arch/arm/mach-at91/armv7/clock.c
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/mach-at91/armv7/cpu.c
index 8d86f97..8d86f97 100644
--- a/arch/arm/cpu/armv7/at91/cpu.c
+++ b/arch/arm/mach-at91/armv7/cpu.c
diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/mach-at91/armv7/reset.c
index b30e79b..b30e79b 100644
--- a/arch/arm/cpu/armv7/at91/reset.c
+++ b/arch/arm/mach-at91/armv7/reset.c
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/mach-at91/armv7/sama5d3_devices.c
index 78ecfc8..78ecfc8 100644
--- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c
+++ b/arch/arm/mach-at91/armv7/sama5d3_devices.c
diff --git a/arch/arm/cpu/armv7/at91/sama5d4_devices.c b/arch/arm/mach-at91/armv7/sama5d4_devices.c
index ef39cb7..ef39cb7 100644
--- a/arch/arm/cpu/armv7/at91/sama5d4_devices.c
+++ b/arch/arm/mach-at91/armv7/sama5d4_devices.c
diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/mach-at91/armv7/timer.c
index 19bf80b..19bf80b 100644
--- a/arch/arm/cpu/armv7/at91/timer.c
+++ b/arch/arm/mach-at91/armv7/timer.c
diff --git a/arch/arm/mach-at91/config.mk b/arch/arm/mach-at91/config.mk
new file mode 100644
index 0000000..7168abb
--- /dev/null
+++ b/arch/arm/mach-at91/config.mk
@@ -0,0 +1,9 @@
+ifeq ($(CONFIG_CPU_ARM926EJS),y)
+PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
+endif
+
+ifeq ($(CONFIG_CPU_V7),y)
+ifndef CONFIG_SPL_BUILD
+ALL-y += u-boot.img
+endif
+endif
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/mach-at91/include/mach/at91_common.h
index efcd74e..efcd74e 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/mach-at91/include/mach/at91_common.h
diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/mach-at91/include/mach/at91_dbu.h
index 7346fc0..7346fc0 100644
--- a/arch/arm/include/asm/arch-at91/at91_dbu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbu.h
diff --git a/arch/arm/include/asm/arch-at91/at91_eefc.h b/arch/arm/mach-at91/include/mach/at91_eefc.h
index 7ffbaee..7ffbaee 100644
--- a/arch/arm/include/asm/arch-at91/at91_eefc.h
+++ b/arch/arm/mach-at91/include/mach/at91_eefc.h
diff --git a/arch/arm/include/asm/arch-at91/at91_emac.h b/arch/arm/mach-at91/include/mach/at91_emac.h
index a0d74ab..a0d74ab 100644
--- a/arch/arm/include/asm/arch-at91/at91_emac.h
+++ b/arch/arm/mach-at91/include/mach/at91_emac.h
diff --git a/arch/arm/include/asm/arch-at91/at91_gpbr.h b/arch/arm/mach-at91/include/mach/at91_gpbr.h
index e781481..e781481 100644
--- a/arch/arm/include/asm/arch-at91/at91_gpbr.h
+++ b/arch/arm/mach-at91/include/mach/at91_gpbr.h
diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h
index 2379dd4..2379dd4 100644
--- a/arch/arm/include/asm/arch-at91/at91_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91_mc.h b/arch/arm/mach-at91/include/mach/at91_mc.h
index 2ace779..2ace779 100644
--- a/arch/arm/include/asm/arch-at91/at91_mc.h
+++ b/arch/arm/mach-at91/include/mach/at91_mc.h
diff --git a/arch/arm/include/asm/arch-at91/at91_pdc.h b/arch/arm/mach-at91/include/mach/at91_pdc.h
index 832ebb5..832ebb5 100644
--- a/arch/arm/include/asm/arch-at91/at91_pdc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pdc.h
diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
index 50464ff..3012278 100644
--- a/arch/arm/include/asm/arch-at91/at91_pio.h
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -114,14 +114,10 @@ typedef union at91_pio {
at91_port_t pioa;
at91_port_t piob;
at91_port_t pioc;
- #if (ATMEL_PIO_PORTS > 3)
- at91_port_t piod;
- #endif
- #if (ATMEL_PIO_PORTS > 4)
- at91_port_t pioe;
- #endif
- } ;
- at91_port_t port[ATMEL_PIO_PORTS];
+ at91_port_t piod; /* not present in all hardware */
+ at91_port_t pioe;/* not present in all hardware */
+ };
+ at91_port_t port[5];
} at91_pio_t;
#ifdef CONFIG_AT91_GPIO
diff --git a/arch/arm/include/asm/arch-at91/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 56724f1..56724f1 100644
--- a/arch/arm/include/asm/arch-at91/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 65691ab..65691ab 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
diff --git a/arch/arm/include/asm/arch-at91/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index e4eb3da..e4eb3da 100644
--- a/arch/arm/include/asm/arch-at91/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
diff --git a/arch/arm/include/asm/arch-at91/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
index fe7619a..fe7619a 100644
--- a/arch/arm/include/asm/arch-at91/at91_rtt.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
diff --git a/arch/arm/include/asm/arch-at91/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
index b18665b..b18665b 100644
--- a/arch/arm/include/asm/arch-at91/at91_spi.h
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
diff --git a/arch/arm/include/asm/arch-at91/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
index b1ee147..b1ee147 100644
--- a/arch/arm/include/asm/arch-at91/at91_st.h
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
diff --git a/arch/arm/include/asm/arch-at91/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
index de0e266..de0e266 100644
--- a/arch/arm/include/asm/arch-at91/at91_tc.h
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
diff --git a/arch/arm/include/asm/arch-at91/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
index 0644bbf..0644bbf 100644
--- a/arch/arm/include/asm/arch-at91/at91_wdt.h
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
diff --git a/arch/arm/include/asm/arch-at91/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index d177bdc..d177bdc 100644
--- a/arch/arm/include/asm/arch-at91/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 8950d67..8950d67 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index dc61f48..dc61f48 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 6dfcf4c..6dfcf4c 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index fc5f083..fc5f083 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 64a3888..64a3888 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
index 54d8622..54d8622 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9263_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9_matrix.h
index d0bf0c2..d0bf0c2 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 3a076c6..3a076c6 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index d29e98e..d29e98e 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 6df8cdb..6df8cdb 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
index 80e49e3..80e49e3 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 3a8e6d6..3a8e6d6 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
index 295f768..295f768 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 36a5cdf..36a5cdf 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
index bd0b25a..bd0b25a 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/atmel_mpddrc.h b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
index 130a85a..130a85a 100644
--- a/arch/arm/include/asm/arch-at91/atmel_mpddrc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
diff --git a/arch/arm/include/asm/arch-at91/atmel_serial.h b/arch/arm/mach-at91/include/mach/atmel_serial.h
index 5bc094b..5bc094b 100644
--- a/arch/arm/include/asm/arch-at91/atmel_serial.h
+++ b/arch/arm/mach-at91/include/mach/atmel_serial.h
diff --git a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
index 38b5012..38b5012 100644
--- a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/mach-at91/include/mach/clk.h
index 1d45e2d..1d45e2d 100644
--- a/arch/arm/include/asm/arch-at91/clk.h
+++ b/arch/arm/mach-at91/include/mach/clk.h
diff --git a/arch/arm/include/asm/arch-at91/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 6d2a7b7..6d2a7b7 100644
--- a/arch/arm/include/asm/arch-at91/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index ff6b71b..ff6b71b 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
diff --git a/arch/arm/include/asm/arch-at91/sama5_matrix.h b/arch/arm/mach-at91/include/mach/sama5_matrix.h
index e324766..e324766 100644
--- a/arch/arm/include/asm/arch-at91/sama5_matrix.h
+++ b/arch/arm/mach-at91/include/mach/sama5_matrix.h
diff --git a/arch/arm/include/asm/arch-at91/sama5_sfr.h b/arch/arm/mach-at91/include/mach/sama5_sfr.h
index 3081d37..3081d37 100644
--- a/arch/arm/include/asm/arch-at91/sama5_sfr.h
+++ b/arch/arm/mach-at91/include/mach/sama5_sfr.h
diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
index 227ba80..227ba80 100644
--- a/arch/arm/include/asm/arch-at91/sama5d3.h
+++ b/arch/arm/mach-at91/include/mach/sama5d3.h
diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/mach-at91/include/mach/sama5d3_smc.h
index a859b6d..a859b6d 100644
--- a/arch/arm/include/asm/arch-at91/sama5d3_smc.h
+++ b/arch/arm/mach-at91/include/mach/sama5d3_smc.h
diff --git a/arch/arm/include/asm/arch-at91/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h
index f30cb5f..f30cb5f 100644
--- a/arch/arm/include/asm/arch-at91/sama5d4.h
+++ b/arch/arm/mach-at91/include/mach/sama5d4.h
diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/mach-at91/mpddrc.c
index beec13d..beec13d 100644
--- a/arch/arm/cpu/at91-common/mpddrc.c
+++ b/arch/arm/mach-at91/mpddrc.c
diff --git a/arch/arm/cpu/at91-common/phy.c b/arch/arm/mach-at91/phy.c
index 2cba716..2cba716 100644
--- a/arch/arm/cpu/at91-common/phy.c
+++ b/arch/arm/mach-at91/phy.c
diff --git a/arch/arm/cpu/at91-common/sdram.c b/arch/arm/mach-at91/sdram.c
index 5758b06..5758b06 100644
--- a/arch/arm/cpu/at91-common/sdram.c
+++ b/arch/arm/mach-at91/sdram.c
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/mach-at91/spl.c
index aaa5eec..aaa5eec 100644
--- a/arch/arm/cpu/at91-common/spl.c
+++ b/arch/arm/mach-at91/spl.c
diff --git a/arch/arm/cpu/at91-common/spl_at91.c b/arch/arm/mach-at91/spl_at91.c
index 89f588b..89f588b 100644
--- a/arch/arm/cpu/at91-common/spl_at91.c
+++ b/arch/arm/mach-at91/spl_at91.c
diff --git a/arch/arm/cpu/at91-common/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c
index 9cc1111..9cc1111 100644
--- a/arch/arm/cpu/at91-common/spl_atmel.c
+++ b/arch/arm/mach-at91/spl_atmel.c
diff --git a/arch/arm/cpu/at91-common/u-boot-spl.lds b/arch/arm/mach-at91/u-boot-spl.lds
index eccca43..eccca43 100644
--- a/arch/arm/cpu/at91-common/u-boot-spl.lds
+++ b/arch/arm/mach-at91/u-boot-spl.lds
diff --git a/arch/arm/cpu/arm926ejs/davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 613f04d..6827721 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -21,10 +21,6 @@ config TARGET_CAM_ENC_4XX
bool "CAM ENC 4xx board"
select SUPPORT_SPL
-config TARGET_HAWKBOARD
- bool "Hawkboard"
- select SUPPORT_SPL
-
config TARGET_DAVINCI_DM355EVM
bool "DM355 EVM board"
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 7d67191..7d67191 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/mach-davinci/config.mk
index 69e9d5a..69e9d5a 100644
--- a/arch/arm/cpu/arm926ejs/davinci/config.mk
+++ b/arch/arm/mach-davinci/config.mk
diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/mach-davinci/cpu.c
index ff61147..ff61147 100644
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ b/arch/arm/mach-davinci/cpu.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/mach-davinci/da830_pinmux.c
index edaab45..edaab45 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
+++ b/arch/arm/mach-davinci/da830_pinmux.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/mach-davinci/da850_lowlevel.c
index 19730ce..19730ce 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/mach-davinci/da850_lowlevel.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/mach-davinci/da850_pinmux.c
index 6105f63..6105f63 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
+++ b/arch/arm/mach-davinci/da850_pinmux.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index f9550a1..f9550a1 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f6ca527..f6ca527 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/mach-davinci/dm365_lowlevel.c
index c8b4498..c8b4498 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ b/arch/arm/mach-davinci/dm365_lowlevel.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index c58e271..c58e271 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index cfea830..cfea830 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/dp83848.c b/arch/arm/mach-davinci/dp83848.c
index 603d507..6387e95 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dp83848.c
+++ b/arch/arm/mach-davinci/dp83848.c
@@ -13,7 +13,7 @@
#include <net.h>
#include <dp83848.h>
#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
diff --git a/arch/arm/cpu/arm926ejs/davinci/et1011c.c b/arch/arm/mach-davinci/et1011c.c
index 9d53875..151020d 100644
--- a/arch/arm/cpu/arm926ejs/davinci/et1011c.c
+++ b/arch/arm/mach-davinci/et1011c.c
@@ -10,7 +10,7 @@
#include <net.h>
#include <miiphy.h>
#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
diff --git a/arch/arm/include/asm/arch-davinci/aintc_defs.h b/arch/arm/mach-davinci/include/mach/aintc_defs.h
index 5063e39..5063e39 100644
--- a/arch/arm/include/asm/arch-davinci/aintc_defs.h
+++ b/arch/arm/mach-davinci/include/mach/aintc_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h b/arch/arm/mach-davinci/include/mach/da850_lowlevel.h
index 45a325c..45a325c 100644
--- a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
+++ b/arch/arm/mach-davinci/include/mach/da850_lowlevel.h
diff --git a/arch/arm/include/asm/arch-davinci/da8xx-usb.h b/arch/arm/mach-davinci/include/mach/da8xx-usb.h
index f091e49..f091e49 100644
--- a/arch/arm/include/asm/arch-davinci/da8xx-usb.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx-usb.h
diff --git a/arch/arm/include/asm/arch-davinci/davinci_misc.h b/arch/arm/mach-davinci/include/mach/davinci_misc.h
index 03be388..03be388 100644
--- a/arch/arm/include/asm/arch-davinci/davinci_misc.h
+++ b/arch/arm/mach-davinci/include/mach/davinci_misc.h
diff --git a/arch/arm/include/asm/arch-davinci/ddr2_defs.h b/arch/arm/mach-davinci/include/mach/ddr2_defs.h
index 24afd9d..24afd9d 100644
--- a/arch/arm/include/asm/arch-davinci/ddr2_defs.h
+++ b/arch/arm/mach-davinci/include/mach/ddr2_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/dm365_lowlevel.h b/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h
index 6c0275e..6c0275e 100644
--- a/arch/arm/include/asm/arch-davinci/dm365_lowlevel.h
+++ b/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h
diff --git a/arch/arm/include/asm/arch-davinci/emac_defs.h b/arch/arm/mach-davinci/include/mach/emac_defs.h
index c3f046e..c3f046e 100644
--- a/arch/arm/include/asm/arch-davinci/emac_defs.h
+++ b/arch/arm/mach-davinci/include/mach/emac_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 7da0060..7da0060 100644
--- a/arch/arm/include/asm/arch-davinci/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index a4eb0bd..a4eb0bd 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
diff --git a/arch/arm/include/asm/arch-davinci/i2c_defs.h b/arch/arm/mach-davinci/include/mach/i2c_defs.h
index 06da894..06da894 100644
--- a/arch/arm/include/asm/arch-davinci/i2c_defs.h
+++ b/arch/arm/mach-davinci/include/mach/i2c_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/mach-davinci/include/mach/pinmux_defs.h
index 2d82af5..2d82af5 100644
--- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h
+++ b/arch/arm/mach-davinci/include/mach/pinmux_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/pll_defs.h b/arch/arm/mach-davinci/include/mach/pll_defs.h
index d083ccc..d083ccc 100644
--- a/arch/arm/include/asm/arch-davinci/pll_defs.h
+++ b/arch/arm/mach-davinci/include/mach/pll_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/psc_defs.h b/arch/arm/mach-davinci/include/mach/psc_defs.h
index bcb5580..bcb5580 100644
--- a/arch/arm/include/asm/arch-davinci/psc_defs.h
+++ b/arch/arm/mach-davinci/include/mach/psc_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/sdmmc_defs.h b/arch/arm/mach-davinci/include/mach/sdmmc_defs.h
index 9aa3f4a..9aa3f4a 100644
--- a/arch/arm/include/asm/arch-davinci/sdmmc_defs.h
+++ b/arch/arm/mach-davinci/include/mach/sdmmc_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/syscfg_defs.h b/arch/arm/mach-davinci/include/mach/syscfg_defs.h
index 812088f..812088f 100644
--- a/arch/arm/include/asm/arch-davinci/syscfg_defs.h
+++ b/arch/arm/mach-davinci/include/mach/syscfg_defs.h
diff --git a/arch/arm/include/asm/arch-davinci/timer_defs.h b/arch/arm/mach-davinci/include/mach/timer_defs.h
index 94d1832..94d1832 100644
--- a/arch/arm/include/asm/arch-davinci/timer_defs.h
+++ b/arch/arm/mach-davinci/include/mach/timer_defs.h
diff --git a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c b/arch/arm/mach-davinci/ksz8873.c
index 4af5dd2..75af135 100644
--- a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
+++ b/arch/arm/mach-davinci/ksz8873.c
@@ -20,7 +20,7 @@
#include <net.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
-#include "../../../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/davinci_emac.h"
int ksz8873_is_phy_connected(int phy_addr)
{
diff --git a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S b/arch/arm/mach-davinci/lowlevel_init.S
index e916234..e916234 100644
--- a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/arch/arm/mach-davinci/lowlevel_init.S
diff --git a/arch/arm/cpu/arm926ejs/davinci/lxt972.c b/arch/arm/mach-davinci/lxt972.c
index c482fd9..a7356f9 100644
--- a/arch/arm/cpu/arm926ejs/davinci/lxt972.c
+++ b/arch/arm/mach-davinci/lxt972.c
@@ -14,7 +14,7 @@
#include <miiphy.h>
#include <lxt971a.h>
#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/davinci_emac.h"
#ifdef CONFIG_DRIVER_TI_EMAC
diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c b/arch/arm/mach-davinci/misc.c
index e18bdfc..e18bdfc 100644
--- a/arch/arm/cpu/arm926ejs/davinci/misc.c
+++ b/arch/arm/mach-davinci/misc.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/pinmux.c b/arch/arm/mach-davinci/pinmux.c
index e9d8c87..e9d8c87 100644
--- a/arch/arm/cpu/arm926ejs/davinci/pinmux.c
+++ b/arch/arm/mach-davinci/pinmux.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 8d99e2e..8d99e2e 100644
--- a/arch/arm/cpu/arm926ejs/davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/mach-davinci/reset.c
index 6b0f154..6b0f154 100644
--- a/arch/arm/cpu/arm926ejs/davinci/reset.c
+++ b/arch/arm/mach-davinci/reset.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/mach-davinci/spl.c
index 49349da..49349da 100644
--- a/arch/arm/cpu/arm926ejs/davinci/spl.c
+++ b/arch/arm/mach-davinci/spl.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/mach-davinci/timer.c
index c7d0652..c7d0652 100644
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ b/arch/arm/mach-davinci/timer.c
diff --git a/arch/arm/cpu/armv7/highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 0e73c04..0e73c04 100644
--- a/arch/arm/cpu/armv7/highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
diff --git a/arch/arm/cpu/armv7/highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 876099d..876099d 100644
--- a/arch/arm/cpu/armv7/highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
diff --git a/arch/arm/cpu/armv7/highbank/timer.c b/arch/arm/mach-highbank/timer.c
index d56bf21..d56bf21 100644
--- a/arch/arm/cpu/armv7/highbank/timer.c
+++ b/arch/arm/mach-highbank/timer.c
diff --git a/arch/arm/cpu/armv7/keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 134ae87..134ae87 100644
--- a/arch/arm/cpu/armv7/keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/mach-keystone/Makefile
index ed030db..ed030db 100644
--- a/arch/arm/cpu/armv7/keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2e.c b/arch/arm/mach-keystone/clock-k2e.c
index 31f6661..31f6661 100644
--- a/arch/arm/cpu/armv7/keystone/clock-k2e.c
+++ b/arch/arm/mach-keystone/clock-k2e.c
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2hk.c b/arch/arm/mach-keystone/clock-k2hk.c
index 1591960..1591960 100644
--- a/arch/arm/cpu/armv7/keystone/clock-k2hk.c
+++ b/arch/arm/mach-keystone/clock-k2hk.c
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2l.c b/arch/arm/mach-keystone/clock-k2l.c
index 1c5e4d5..1c5e4d5 100644
--- a/arch/arm/cpu/armv7/keystone/clock-k2l.c
+++ b/arch/arm/mach-keystone/clock-k2l.c
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/mach-keystone/clock.c
index d13fbc1..d13fbc1 100644
--- a/arch/arm/cpu/armv7/keystone/clock.c
+++ b/arch/arm/mach-keystone/clock.c
diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/mach-keystone/cmd_clock.c
index af1b701..af1b701 100644
--- a/arch/arm/cpu/armv7/keystone/cmd_clock.c
+++ b/arch/arm/mach-keystone/cmd_clock.c
diff --git a/arch/arm/cpu/armv7/keystone/cmd_ddr3.c b/arch/arm/mach-keystone/cmd_ddr3.c
index ea78ad8..ea78ad8 100644
--- a/arch/arm/cpu/armv7/keystone/cmd_ddr3.c
+++ b/arch/arm/mach-keystone/cmd_ddr3.c
diff --git a/arch/arm/cpu/armv7/keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c
index f9f58a3..f9f58a3 100644
--- a/arch/arm/cpu/armv7/keystone/cmd_mon.c
+++ b/arch/arm/mach-keystone/cmd_mon.c
diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/mach-keystone/ddr3.c
index 923906a..dfb27b5 100644
--- a/arch/arm/cpu/armv7/keystone/ddr3.c
+++ b/arch/arm/mach-keystone/ddr3.c
@@ -263,17 +263,14 @@ static void ddr3_map_ecc_cic2_irq(u32 base)
}
#endif
-void ddr3_init_ecc(u32 base)
+void ddr3_init_ecc(u32 base, u32 ddr3_size)
{
- u32 ddr3_size;
-
if (!ddr3_ecc_support_rmw(base)) {
ddr3_disable_ecc(base);
return;
}
ddr3_ecc_init_range(base);
- ddr3_size = ddr3_get_size();
ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size);
/* mapping DDR3 ECC system interrupt from CIC2 to GIC */
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2e.h b/arch/arm/mach-keystone/include/mach/clock-k2e.h
index d013b83..d013b83 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2e.h
+++ b/arch/arm/mach-keystone/include/mach/clock-k2e.h
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/mach-keystone/include/mach/clock-k2hk.h
index f28d5f0..f28d5f0 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h
+++ b/arch/arm/mach-keystone/include/mach/clock-k2hk.h
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2l.h b/arch/arm/mach-keystone/include/mach/clock-k2l.h
index bb9a5c4..bb9a5c4 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2l.h
+++ b/arch/arm/mach-keystone/include/mach/clock-k2l.h
diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/mach-keystone/include/mach/clock.h
index 9f6cfb2..9f6cfb2 100644
--- a/arch/arm/include/asm/arch-keystone/clock.h
+++ b/arch/arm/mach-keystone/include/mach/clock.h
diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/mach-keystone/include/mach/clock_defs.h
index 85a046b..85a046b 100644
--- a/arch/arm/include/asm/arch-keystone/clock_defs.h
+++ b/arch/arm/mach-keystone/include/mach/clock_defs.h
diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/mach-keystone/include/mach/ddr3.h
index b044d6f..a22c237 100644
--- a/arch/arm/include/asm/arch-keystone/ddr3.h
+++ b/arch/arm/mach-keystone/include/mach/ddr3.h
@@ -48,10 +48,9 @@ struct ddr3_emif_config {
unsigned int sdrfc;
};
-void ddr3_init(void);
-int ddr3_get_size(void);
+u32 ddr3_init(void);
void ddr3_reset_ddrphy(void);
-void ddr3_init_ecc(u32 base);
+void ddr3_init_ecc(u32 base, u32 ddr3_size);
void ddr3_disable_ecc(u32 base);
void ddr3_check_ecc_int(u32 base);
int ddr3_ecc_support_rmw(u32 base);
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/mach-keystone/include/mach/hardware-k2e.h
index df49995..df49995 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2e.h
+++ b/arch/arm/mach-keystone/include/mach/hardware-k2e.h
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/mach-keystone/include/mach/hardware-k2hk.h
index 195c0d3..195c0d3 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/mach-keystone/include/mach/hardware-k2hk.h
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/mach-keystone/include/mach/hardware-k2l.h
index 4f1197e..4f1197e 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2l.h
+++ b/arch/arm/mach-keystone/include/mach/hardware-k2l.h
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h
index 16cbcee..16cbcee 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/mach-keystone/include/mach/hardware.h
diff --git a/arch/arm/include/asm/arch-keystone/i2c_defs.h b/arch/arm/mach-keystone/include/mach/i2c_defs.h
index d425652..d425652 100644
--- a/arch/arm/include/asm/arch-keystone/i2c_defs.h
+++ b/arch/arm/mach-keystone/include/mach/i2c_defs.h
diff --git a/arch/arm/include/asm/arch-keystone/mon.h b/arch/arm/mach-keystone/include/mach/mon.h
index 33a2876..33a2876 100644
--- a/arch/arm/include/asm/arch-keystone/mon.h
+++ b/arch/arm/mach-keystone/include/mach/mon.h
diff --git a/arch/arm/include/asm/arch-keystone/msmc.h b/arch/arm/mach-keystone/include/mach/msmc.h
index 083f5ba..083f5ba 100644
--- a/arch/arm/include/asm/arch-keystone/msmc.h
+++ b/arch/arm/mach-keystone/include/mach/msmc.h
diff --git a/arch/arm/include/asm/arch-keystone/psc_defs.h b/arch/arm/mach-keystone/include/mach/psc_defs.h
index 70d22cf..70d22cf 100644
--- a/arch/arm/include/asm/arch-keystone/psc_defs.h
+++ b/arch/arm/mach-keystone/include/mach/psc_defs.h
diff --git a/arch/arm/include/asm/arch-keystone/xhci-keystone.h b/arch/arm/mach-keystone/include/mach/xhci-keystone.h
index 3aab4e0..3aab4e0 100644
--- a/arch/arm/include/asm/arch-keystone/xhci-keystone.h
+++ b/arch/arm/mach-keystone/include/mach/xhci-keystone.h
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/mach-keystone/init.c
index c96845c..c96845c 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/mach-keystone/init.c
diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 11a9357..11a9357 100644
--- a/arch/arm/cpu/armv7/keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/mach-keystone/msmc.c
index 7899141..7899141 100644
--- a/arch/arm/cpu/armv7/keystone/msmc.c
+++ b/arch/arm/mach-keystone/msmc.c
diff --git a/arch/arm/cpu/armv7/keystone/psc.c b/arch/arm/mach-keystone/psc.c
index 237e776..237e776 100644
--- a/arch/arm/cpu/armv7/keystone/psc.c
+++ b/arch/arm/mach-keystone/psc.c
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 45c6687..45c6687 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index df4756e..df4756e 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cache.c b/arch/arm/mach-kirkwood/cache.c
index e18a309..e18a309 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cache.c
+++ b/arch/arm/mach-kirkwood/cache.c
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/mach-kirkwood/cpu.c
index 4c9d3fd..4c9d3fd 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/mach-kirkwood/cpu.c
diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index e77ac40..e77ac40 100644
--- a/arch/arm/include/asm/arch-kirkwood/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/mach-kirkwood/include/mach/cpu.h
index 926d347..926d347 100644
--- a/arch/arm/include/asm/arch-kirkwood/cpu.h
+++ b/arch/arm/mach-kirkwood/include/mach/cpu.h
diff --git a/arch/arm/include/asm/arch-kirkwood/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h
index aa8c5da..aa8c5da 100644
--- a/arch/arm/include/asm/arch-kirkwood/gpio.h
+++ b/arch/arm/mach-kirkwood/include/mach/gpio.h
diff --git a/arch/arm/include/asm/arch-kirkwood/kw88f6192.h b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
index de220d5..de220d5 100644
--- a/arch/arm/include/asm/arch-kirkwood/kw88f6192.h
+++ b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h
diff --git a/arch/arm/include/asm/arch-kirkwood/kw88f6281.h b/arch/arm/mach-kirkwood/include/mach/kw88f6281.h
index ca88a30..ca88a30 100644
--- a/arch/arm/include/asm/arch-kirkwood/kw88f6281.h
+++ b/arch/arm/mach-kirkwood/include/mach/kw88f6281.h
diff --git a/arch/arm/include/asm/arch-kirkwood/mpp.h b/arch/arm/mach-kirkwood/include/mach/mpp.h
index 7c8f6eb..7c8f6eb 100644
--- a/arch/arm/include/asm/arch-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/include/mach/mpp.h
diff --git a/arch/arm/include/asm/arch-kirkwood/soc.h b/arch/arm/mach-kirkwood/include/mach/soc.h
index 58ed71b..58ed71b 100644
--- a/arch/arm/include/asm/arch-kirkwood/soc.h
+++ b/arch/arm/mach-kirkwood/include/mach/soc.h
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 7222504..7222504 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
diff --git a/arch/arm/cpu/arm926ejs/nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 265f336..265f336 100644
--- a/arch/arm/cpu/arm926ejs/nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
diff --git a/arch/arm/cpu/arm926ejs/nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index cdf1345..cdf1345 100644
--- a/arch/arm/cpu/arm926ejs/nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
diff --git a/arch/arm/cpu/arm926ejs/nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
index eff5b2b..eff5b2b 100644
--- a/arch/arm/cpu/arm926ejs/nomadik/gpio.c
+++ b/arch/arm/mach-nomadik/gpio.c
diff --git a/arch/arm/include/asm/arch-nomadik/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 311758a..311758a 100644
--- a/arch/arm/include/asm/arch-nomadik/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
diff --git a/arch/arm/include/asm/arch-nomadik/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
index f89f242..f89f242 100644
--- a/arch/arm/include/asm/arch-nomadik/mtu.h
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
diff --git a/arch/arm/cpu/arm926ejs/nomadik/reset.S b/arch/arm/mach-nomadik/reset.S
index ec95472..ec95472 100644
--- a/arch/arm/cpu/arm926ejs/nomadik/reset.S
+++ b/arch/arm/mach-nomadik/reset.S
diff --git a/arch/arm/cpu/arm926ejs/nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
index 775d0b7..775d0b7 100644
--- a/arch/arm/cpu/arm926ejs/nomadik/timer.c
+++ b/arch/arm/mach-nomadik/timer.c
diff --git a/arch/arm/cpu/arm926ejs/orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 5a54262..5a54262 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
diff --git a/arch/arm/cpu/arm926ejs/orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 546ebcb..546ebcb 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/mach-orion5x/cpu.c
index f88db3b..f88db3b 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c
+++ b/arch/arm/mach-orion5x/cpu.c
diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/mach-orion5x/dram.c
index 9ed93d2..9ed93d2 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/dram.c
+++ b/arch/arm/mach-orion5x/dram.c
diff --git a/arch/arm/include/asm/arch-orion5x/cpu.h b/arch/arm/mach-orion5x/include/mach/cpu.h
index 08a450f..08a450f 100644
--- a/arch/arm/include/asm/arch-orion5x/cpu.h
+++ b/arch/arm/mach-orion5x/include/mach/cpu.h
diff --git a/arch/arm/include/asm/arch-orion5x/mv88f5182.h b/arch/arm/mach-orion5x/include/mach/mv88f5182.h
index e6c71ae..e6c71ae 100644
--- a/arch/arm/include/asm/arch-orion5x/mv88f5182.h
+++ b/arch/arm/mach-orion5x/include/mach/mv88f5182.h
diff --git a/arch/arm/include/asm/arch-orion5x/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index fbb1de8..fbb1de8 100644
--- a/arch/arm/include/asm/arch-orion5x/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
diff --git a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S
index 4dacc29..4dacc29 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S
+++ b/arch/arm/mach-orion5x/lowlevel_init.S
diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/mach-orion5x/timer.c
index ec4f6be..ec4f6be 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/timer.c
+++ b/arch/arm/mach-orion5x/timer.c
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
new file mode 100644
index 0000000..8615248
--- /dev/null
+++ b/arch/arm/mach-tegra/Kconfig
@@ -0,0 +1,52 @@
+if TEGRA
+
+choice
+ prompt "Tegra SoC select"
+
+config TEGRA20
+ bool "Tegra20 family"
+
+config TEGRA30
+ bool "Tegra30 family"
+
+config TEGRA114
+ bool "Tegra114 family"
+
+config TEGRA124
+ bool "Tegra124 family"
+
+endchoice
+
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x1800
+
+config USE_PRIVATE_LIBGCC
+ default y
+
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_SPI
+ default y
+
+config DM_SPI_FLASH
+ default y
+
+config DM_I2C
+ default y
+
+config DM_GPIO
+ default y
+
+source "arch/arm/mach-tegra/tegra20/Kconfig"
+source "arch/arm/mach-tegra/tegra30/Kconfig"
+source "arch/arm/mach-tegra/tegra114/Kconfig"
+source "arch/arm/mach-tegra/tegra124/Kconfig"
+
+endif
diff --git a/arch/arm/cpu/tegra-common/Makefile b/arch/arm/mach-tegra/Makefile
index a78869e..04cef0a 100644
--- a/arch/arm/cpu/tegra-common/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -7,6 +7,13 @@
# SPDX-License-Identifier: GPL-2.0+
#
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-y += cpu.o
+else
+obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
+endif
+
obj-y += ap.o
obj-y += board.o
obj-y += cache.o
@@ -17,3 +24,8 @@ obj-y += powergate.o
obj-y += xusb-padctl.o
obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
obj-$(CONFIG_TEGRA124) += vpr.o
+
+obj-$(CONFIG_TEGRA20) += tegra20/
+obj-$(CONFIG_TEGRA30) += tegra30/
+obj-$(CONFIG_TEGRA114) += tegra114/
+obj-$(CONFIG_TEGRA124) += tegra124/
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/mach-tegra/ap.c
index a17dfd1..a17dfd1 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/mach-tegra/ap.c
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/mach-tegra/board.c
index b6a84a5..b6a84a5 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/mach-tegra/board.c
diff --git a/arch/arm/cpu/tegra-common/cache.c b/arch/arm/mach-tegra/cache.c
index 94f5bce..94f5bce 100644
--- a/arch/arm/cpu/tegra-common/cache.c
+++ b/arch/arm/mach-tegra/cache.c
diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/mach-tegra/clock.c
index 11c7435..11c7435 100644
--- a/arch/arm/cpu/tegra-common/clock.c
+++ b/arch/arm/mach-tegra/clock.c
diff --git a/arch/arm/cpu/armv7/tegra-common/cmd_enterrcm.c b/arch/arm/mach-tegra/cmd_enterrcm.c
index a94ec93..a94ec93 100644
--- a/arch/arm/cpu/armv7/tegra-common/cmd_enterrcm.c
+++ b/arch/arm/mach-tegra/cmd_enterrcm.c
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/mach-tegra/cpu.c
index c6f3b02..c6f3b02 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.c
+++ b/arch/arm/mach-tegra/cpu.c
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/mach-tegra/cpu.h
index b4ca44f..b4ca44f 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.h
+++ b/arch/arm/mach-tegra/cpu.h
diff --git a/arch/arm/cpu/tegra-common/lowlevel_init.S b/arch/arm/mach-tegra/lowlevel_init.S
index a211bb3..a211bb3 100644
--- a/arch/arm/cpu/tegra-common/lowlevel_init.S
+++ b/arch/arm/mach-tegra/lowlevel_init.S
diff --git a/arch/arm/cpu/tegra-common/pinmux-common.c b/arch/arm/mach-tegra/pinmux-common.c
index 6e3ab0c..6e3ab0c 100644
--- a/arch/arm/cpu/tegra-common/pinmux-common.c
+++ b/arch/arm/mach-tegra/pinmux-common.c
diff --git a/arch/arm/cpu/tegra-common/powergate.c b/arch/arm/mach-tegra/powergate.c
index 439cff3..439cff3 100644
--- a/arch/arm/cpu/tegra-common/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/mach-tegra/spl.c
index e0f9d5b..e0f9d5b 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/mach-tegra/spl.c
diff --git a/arch/arm/cpu/tegra-common/sys_info.c b/arch/arm/mach-tegra/sys_info.c
index 5933c35..5933c35 100644
--- a/arch/arm/cpu/tegra-common/sys_info.c
+++ b/arch/arm/mach-tegra/sys_info.c
diff --git a/arch/arm/cpu/armv7/tegra114/Kconfig b/arch/arm/mach-tegra/tegra114/Kconfig
index 31012bc..31012bc 100644
--- a/arch/arm/cpu/armv7/tegra114/Kconfig
+++ b/arch/arm/mach-tegra/tegra114/Kconfig
diff --git a/arch/arm/cpu/tegra114-common/Makefile b/arch/arm/mach-tegra/tegra114/Makefile
index d959b57..7489f5f 100644
--- a/arch/arm/cpu/tegra114-common/Makefile
+++ b/arch/arm/mach-tegra/tegra114/Makefile
@@ -1,9 +1,6 @@
#
# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
@@ -17,4 +14,6 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+
obj-y += clock.o funcmux.o pinmux.o
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/mach-tegra/tegra114/clock.c
index d5194e1..d5194e1 100644
--- a/arch/arm/cpu/tegra114-common/clock.c
+++ b/arch/arm/mach-tegra/tegra114/clock.c
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/mach-tegra/tegra114/cpu.c
index 5ed3bb9..18dc1af 100644
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ b/arch/arm/mach-tegra/tegra114/cpu.c
@@ -22,7 +22,7 @@
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/pmc.h>
-#include "../tegra-common/cpu.h"
+#include "../cpu.h"
/* Tegra114-specific CPU init code */
static void enable_cpu_power_rail(void)
diff --git a/arch/arm/cpu/tegra114-common/funcmux.c b/arch/arm/mach-tegra/tegra114/funcmux.c
index 52441c7..52441c7 100644
--- a/arch/arm/cpu/tegra114-common/funcmux.c
+++ b/arch/arm/mach-tegra/tegra114/funcmux.c
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/mach-tegra/tegra114/pinmux.c
index 3e5acb9..3e5acb9 100644
--- a/arch/arm/cpu/tegra114-common/pinmux.c
+++ b/arch/arm/mach-tegra/tegra114/pinmux.c
diff --git a/arch/arm/cpu/armv7/tegra124/Kconfig b/arch/arm/mach-tegra/tegra124/Kconfig
index 88f627c..88f627c 100644
--- a/arch/arm/cpu/armv7/tegra124/Kconfig
+++ b/arch/arm/mach-tegra/tegra124/Kconfig
diff --git a/arch/arm/cpu/tegra124-common/Makefile b/arch/arm/mach-tegra/tegra124/Makefile
index 7b59fb1..ef2da29 100644
--- a/arch/arm/cpu/tegra124-common/Makefile
+++ b/arch/arm/mach-tegra/tegra124/Makefile
@@ -5,6 +5,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+
obj-y += clock.o
obj-y += funcmux.o
obj-y += pinmux.o
diff --git a/arch/arm/cpu/tegra124-common/clock.c b/arch/arm/mach-tegra/tegra124/clock.c
index fc8bd19..fc8bd19 100644
--- a/arch/arm/cpu/tegra124-common/clock.c
+++ b/arch/arm/mach-tegra/tegra124/clock.c
diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/mach-tegra/tegra124/cpu.c
index 6ff6aeb..974f203 100644
--- a/arch/arm/cpu/arm720t/tegra124/cpu.c
+++ b/arch/arm/mach-tegra/tegra124/cpu.c
@@ -15,7 +15,7 @@
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/ap.h>
-#include "../tegra-common/cpu.h"
+#include "../cpu.h"
/* Tegra124-specific CPU init code */
diff --git a/arch/arm/cpu/tegra124-common/funcmux.c b/arch/arm/mach-tegra/tegra124/funcmux.c
index cced787..cced787 100644
--- a/arch/arm/cpu/tegra124-common/funcmux.c
+++ b/arch/arm/mach-tegra/tegra124/funcmux.c
diff --git a/arch/arm/cpu/tegra124-common/pinmux.c b/arch/arm/mach-tegra/tegra124/pinmux.c
index c6685ea..c6685ea 100644
--- a/arch/arm/cpu/tegra124-common/pinmux.c
+++ b/arch/arm/mach-tegra/tegra124/pinmux.c
diff --git a/arch/arm/cpu/tegra124-common/xusb-padctl.c b/arch/arm/mach-tegra/tegra124/xusb-padctl.c
index 43af883..43af883 100644
--- a/arch/arm/cpu/tegra124-common/xusb-padctl.c
+++ b/arch/arm/mach-tegra/tegra124/xusb-padctl.c
diff --git a/arch/arm/cpu/armv7/tegra20/Kconfig b/arch/arm/mach-tegra/tegra20/Kconfig
index a354e2a..a354e2a 100644
--- a/arch/arm/cpu/armv7/tegra20/Kconfig
+++ b/arch/arm/mach-tegra/tegra20/Kconfig
diff --git a/arch/arm/cpu/tegra20-common/Makefile b/arch/arm/mach-tegra/tegra20/Makefile
index 0e4b3fc..d48f9bb 100644
--- a/arch/arm/cpu/tegra20-common/Makefile
+++ b/arch/arm/mach-tegra/tegra20/Makefile
@@ -1,12 +1,16 @@
#
# (C) Copyright 2010,2011 Nvidia Corporation.
#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
# SPDX-License-Identifier: GPL-2.0+
#
+ifdef CONFIG_SPL_BUILD
+obj-y += cpu.o
+else
+obj-$(CONFIG_PWM_TEGRA) += pwm.o
+obj-$(CONFIG_VIDEO_TEGRA) += display.o
+endif
+
# The AVP is ARMv4T architecture so we must use special compiler
# flags for any startup files it might use.
CFLAGS_warmboot_avp.o += -march=armv4t
diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/mach-tegra/tegra20/clock.c
index 7b9e10c..7b9e10c 100644
--- a/arch/arm/cpu/tegra20-common/clock.c
+++ b/arch/arm/mach-tegra/tegra20/clock.c
diff --git a/arch/arm/cpu/arm720t/tegra20/cpu.c b/arch/arm/mach-tegra/tegra20/cpu.c
index 2533899..67f49d7 100644
--- a/arch/arm/cpu/arm720t/tegra20/cpu.c
+++ b/arch/arm/mach-tegra/tegra20/cpu.c
@@ -18,7 +18,7 @@
#include <asm/io.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/pmc.h>
-#include "../tegra-common/cpu.h"
+#include "../cpu.h"
static void enable_cpu_power_rail(void)
{
diff --git a/arch/arm/cpu/tegra20-common/crypto.c b/arch/arm/mach-tegra/tegra20/crypto.c
index ec95d7c..ec95d7c 100644
--- a/arch/arm/cpu/tegra20-common/crypto.c
+++ b/arch/arm/mach-tegra/tegra20/crypto.c
diff --git a/arch/arm/cpu/tegra20-common/crypto.h b/arch/arm/mach-tegra/tegra20/crypto.h
index f59b927..f59b927 100644
--- a/arch/arm/cpu/tegra20-common/crypto.h
+++ b/arch/arm/mach-tegra/tegra20/crypto.h
diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/mach-tegra/tegra20/display.c
index 61efed6..61efed6 100644
--- a/arch/arm/cpu/armv7/tegra20/display.c
+++ b/arch/arm/mach-tegra/tegra20/display.c
diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/mach-tegra/tegra20/emc.c
index ed2462a..ed2462a 100644
--- a/arch/arm/cpu/tegra20-common/emc.c
+++ b/arch/arm/mach-tegra/tegra20/emc.c
diff --git a/arch/arm/cpu/tegra20-common/funcmux.c b/arch/arm/mach-tegra/tegra20/funcmux.c
index 0df4a07..0df4a07 100644
--- a/arch/arm/cpu/tegra20-common/funcmux.c
+++ b/arch/arm/mach-tegra/tegra20/funcmux.c
diff --git a/arch/arm/cpu/tegra20-common/pinmux.c b/arch/arm/mach-tegra/tegra20/pinmux.c
index e484f99..e484f99 100644
--- a/arch/arm/cpu/tegra20-common/pinmux.c
+++ b/arch/arm/mach-tegra/tegra20/pinmux.c
diff --git a/arch/arm/cpu/tegra20-common/pmu.c b/arch/arm/mach-tegra/tegra20/pmu.c
index a774246..a774246 100644
--- a/arch/arm/cpu/tegra20-common/pmu.c
+++ b/arch/arm/mach-tegra/tegra20/pmu.c
diff --git a/arch/arm/cpu/armv7/tegra20/pwm.c b/arch/arm/mach-tegra/tegra20/pwm.c
index 5b88636..5b88636 100644
--- a/arch/arm/cpu/armv7/tegra20/pwm.c
+++ b/arch/arm/mach-tegra/tegra20/pwm.c
diff --git a/arch/arm/cpu/tegra20-common/warmboot.c b/arch/arm/mach-tegra/tegra20/warmboot.c
index 5fdc4bb..5fdc4bb 100644
--- a/arch/arm/cpu/tegra20-common/warmboot.c
+++ b/arch/arm/mach-tegra/tegra20/warmboot.c
diff --git a/arch/arm/cpu/tegra20-common/warmboot_avp.c b/arch/arm/mach-tegra/tegra20/warmboot_avp.c
index 27ce5f4..27ce5f4 100644
--- a/arch/arm/cpu/tegra20-common/warmboot_avp.c
+++ b/arch/arm/mach-tegra/tegra20/warmboot_avp.c
diff --git a/arch/arm/cpu/tegra20-common/warmboot_avp.h b/arch/arm/mach-tegra/tegra20/warmboot_avp.h
index 7b86acb..7b86acb 100644
--- a/arch/arm/cpu/tegra20-common/warmboot_avp.h
+++ b/arch/arm/mach-tegra/tegra20/warmboot_avp.h
diff --git a/arch/arm/cpu/armv7/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig
index 3abdc7b..3abdc7b 100644
--- a/arch/arm/cpu/armv7/tegra30/Kconfig
+++ b/arch/arm/mach-tegra/tegra30/Kconfig
diff --git a/arch/arm/cpu/tegra30-common/Makefile b/arch/arm/mach-tegra/tegra30/Makefile
index d2d616e..bc250de 100644
--- a/arch/arm/cpu/tegra30-common/Makefile
+++ b/arch/arm/mach-tegra/tegra30/Makefile
@@ -1,9 +1,6 @@
#
# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
@@ -17,4 +14,6 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
+obj-$(CONFIG_SPL_BUILD) += cpu.o
+
obj-y += clock.o funcmux.o pinmux.o
diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/mach-tegra/tegra30/clock.c
index 0eb0f0a..0eb0f0a 100644
--- a/arch/arm/cpu/tegra30-common/clock.c
+++ b/arch/arm/mach-tegra/tegra30/clock.c
diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/mach-tegra/tegra30/cpu.c
index 9003902..c76e74c 100644
--- a/arch/arm/cpu/arm720t/tegra30/cpu.c
+++ b/arch/arm/mach-tegra/tegra30/cpu.c
@@ -22,7 +22,7 @@
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/tegra_i2c.h>
-#include "../tegra-common/cpu.h"
+#include "../cpu.h"
/* Tegra30-specific CPU init code */
void tegra_i2c_ll_write_addr(uint addr, uint config)
diff --git a/arch/arm/cpu/tegra30-common/funcmux.c b/arch/arm/mach-tegra/tegra30/funcmux.c
index 409335c..409335c 100644
--- a/arch/arm/cpu/tegra30-common/funcmux.c
+++ b/arch/arm/mach-tegra/tegra30/funcmux.c
diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/mach-tegra/tegra30/pinmux.c
index 7eb0574..7eb0574 100644
--- a/arch/arm/cpu/tegra30-common/pinmux.c
+++ b/arch/arm/mach-tegra/tegra30/pinmux.c
diff --git a/arch/arm/cpu/tegra-common/vpr.c b/arch/arm/mach-tegra/vpr.c
index f695811..f695811 100644
--- a/arch/arm/cpu/tegra-common/vpr.c
+++ b/arch/arm/mach-tegra/vpr.c
diff --git a/arch/arm/cpu/tegra-common/xusb-padctl.c b/arch/arm/mach-tegra/xusb-padctl.c
index 65f8d2e..65f8d2e 100644
--- a/arch/arm/cpu/tegra-common/xusb-padctl.c
+++ b/arch/arm/mach-tegra/xusb-padctl.c
diff --git a/arch/arm/cpu/arm926ejs/versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index d2e76f4..d2e76f4 100644
--- a/arch/arm/cpu/arm926ejs/versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
diff --git a/arch/arm/cpu/arm926ejs/versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 907f516..907f516 100644
--- a/arch/arm/cpu/arm926ejs/versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
diff --git a/arch/arm/cpu/arm926ejs/versatile/reset.S b/arch/arm/mach-versatile/reset.S
index 1c557b0..1c557b0 100644
--- a/arch/arm/cpu/arm926ejs/versatile/reset.S
+++ b/arch/arm/mach-versatile/reset.S
diff --git a/arch/arm/cpu/arm926ejs/versatile/timer.c b/arch/arm/mach-versatile/timer.c
index 5d694d8..5d694d8 100644
--- a/arch/arm/cpu/arm926ejs/versatile/timer.c
+++ b/arch/arm/mach-versatile/timer.c
diff --git a/arch/avr32/config.mk b/arch/avr32/config.mk
index 469185e..8252f59 100644
--- a/arch/avr32/config.mk
+++ b/arch/avr32/config.mk
@@ -9,6 +9,9 @@ ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := avr32-linux-
endif
+# avr32 has generic board support
+__HAVE_ARCH_GENERIC_BOARD := y
+
CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000
PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax
diff --git a/arch/avr32/cpu/Makefile b/arch/avr32/cpu/Makefile
index 00cede3..e111db3 100644
--- a/arch/avr32/cpu/Makefile
+++ b/arch/avr32/cpu/Makefile
@@ -16,5 +16,6 @@ obj-y += cache.o
obj-y += interrupts.o
obj-$(CONFIG_PORTMUX_PIO) += portmux-pio.o
obj-$(CONFIG_PORTMUX_GPIO) += portmux-gpio.o
+obj-y += mmc.o
obj-$(if $(filter at32ap700x,$(SOC)),y) += at32ap700x/
diff --git a/arch/avr32/cpu/at32ap700x/mmu.c b/arch/avr32/cpu/at32ap700x/mmu.c
index 0e28b21..f5e62f2 100644
--- a/arch/avr32/cpu/at32ap700x/mmu.c
+++ b/arch/avr32/cpu/at32ap700x/mmu.c
@@ -7,7 +7,7 @@ void mmu_init_r(unsigned long dest_addr)
uintptr_t vmr_table_addr;
/* Round monitor address down to the nearest page boundary */
- dest_addr &= PAGE_ADDR_MASK;
+ dest_addr &= MMU_PAGE_ADDR_MASK;
/* Initialize TLB entry 0 to cover the monitor, and lock it */
sysreg_write(TLBEHI, dest_addr | SYSREG_BIT(TLBEHI_V));
@@ -36,7 +36,7 @@ int mmu_handle_tlb_miss(void)
unsigned int fault_pgno;
int first, last;
- fault_pgno = sysreg_read(TLBEAR) >> PAGE_SHIFT;
+ fault_pgno = sysreg_read(TLBEAR) >> MMU_PAGE_SHIFT;
vmr_table = (const struct mmu_vm_range *)sysreg_read(PTBR);
/* Do a binary search through the VM ranges */
@@ -60,8 +60,8 @@ int mmu_handle_tlb_miss(void)
/* Got it; let's slam it into the TLB */
uint32_t tlbelo;
- tlbelo = vmr->phys & ~PAGE_ADDR_MASK;
- tlbelo |= fault_pgno << PAGE_SHIFT;
+ tlbelo = vmr->phys & ~MMU_PAGE_ADDR_MASK;
+ tlbelo |= fault_pgno << MMU_PAGE_SHIFT;
sysreg_write(TLBELO, tlbelo);
__builtin_tlbw();
diff --git a/arch/avr32/cpu/cpu.c b/arch/avr32/cpu/cpu.c
index cef630e..cd226a6 100644
--- a/arch/avr32/cpu/cpu.c
+++ b/arch/avr32/cpu/cpu.c
@@ -27,7 +27,7 @@
DECLARE_GLOBAL_DATA_PTR;
-int cpu_init(void)
+int arch_cpu_init(void)
{
extern void _evba(void);
diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c
index 5d1bc68..d6991f6 100644
--- a/arch/avr32/cpu/exception.c
+++ b/arch/avr32/cpu/exception.c
@@ -96,11 +96,11 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < (gd->arch.stack_end - CONFIG_STACKSIZE)
- || regs->sp >= gd->arch.stack_end)
+ if (regs->sp < (gd->start_addr_sp - CONFIG_STACKSIZE) ||
+ regs->sp >= gd->start_addr_sp)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
- dump_mem("\nStack: ", regs->sp, gd->arch.stack_end);
+ dump_mem("\nStack: ", regs->sp, gd->start_addr_sp);
panic("Unhandled exception\n");
}
diff --git a/arch/avr32/cpu/mmc.c b/arch/avr32/cpu/mmc.c
new file mode 100644
index 0000000..b7213e4
--- /dev/null
+++ b/arch/avr32/cpu/mmc.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ * Copyright (C) 2015 Andreas Bießmann <andreas.devel@googlmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <atmel_mci.h>
+#include <asm/arch/hardware.h>
+
+/* provide cpu_mmc_init, to overwrite provide board_mmc_init */
+int cpu_mmc_init(bd_t *bd)
+{
+ /* This calls the atmel_mci_init in gen_atmel_mci.c */
+ return atmel_mci_init((void *)ATMEL_BASE_MMCI);
+}
diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds
index cb29a22..b0180e3 100644
--- a/arch/avr32/cpu/u-boot.lds
+++ b/arch/avr32/cpu/u-boot.lds
@@ -48,9 +48,11 @@ SECTIONS
_edata = .;
.bss (NOLOAD) : {
+ __bss_start = .;
*(.bss)
*(.bss.*)
}
. = ALIGN(8);
__bss_end = .;
+ __init_end = .;
}
diff --git a/arch/avr32/include/asm/arch-at32ap700x/mmu.h b/arch/avr32/include/asm/arch-at32ap700x/mmu.h
index fcd9a05..4736312 100644
--- a/arch/avr32/include/asm/arch-at32ap700x/mmu.h
+++ b/arch/avr32/include/asm/arch-at32ap700x/mmu.h
@@ -13,9 +13,9 @@
#include <asm/sysreg.h>
-#define PAGE_SHIFT 20
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_ADDR_MASK (~(PAGE_SIZE - 1))
+#define MMU_PAGE_SHIFT 20
+#define MMU_PAGE_SIZE (1UL << MMU_PAGE_SHIFT)
+#define MMU_PAGE_ADDR_MASK (~(MMU_PAGE_SIZE - 1))
#define MMU_VMR_CACHE_NONE \
(SYSREG_BF(AP, 3) | SYSREG_BF(SZ, 3) | SYSREG_BIT(TLBELO_D))
diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h
index 63056a4..529fe22 100644
--- a/arch/avr32/include/asm/config.h
+++ b/arch/avr32/include/asm/config.h
@@ -8,5 +8,6 @@
#define _ASM_CONFIG_H_
#define CONFIG_NEEDS_MANUAL_RELOC
+#define CONFIG_SYS_GENERIC_GLOBAL_DATA
#endif
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
index dbdd2fe..1cde827 100644
--- a/arch/avr32/include/asm/dma-mapping.h
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -14,7 +14,12 @@ enum dma_data_direction {
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
};
-extern void *dma_alloc_coherent(size_t len, unsigned long *handle);
+
+static inline void *dma_alloc_coherent(size_t len, unsigned long *handle)
+{
+ *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
+ return (void *)*handle;
+}
static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
enum dma_data_direction dir)
diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h
index d82fb7c..60abd00 100644
--- a/arch/avr32/include/asm/global_data.h
+++ b/arch/avr32/include/asm/global_data.h
@@ -8,7 +8,6 @@
/* Architecture-specific global data */
struct arch_global_data {
- unsigned long stack_end; /* highest stack address */
unsigned long cpu_hz; /* cpu core clock frequency */
};
diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h
index 6aef808..8b047ec 100644
--- a/arch/avr32/include/asm/u-boot.h
+++ b/arch/avr32/include/asm/u-boot.h
@@ -6,6 +6,11 @@
#ifndef __ASM_U_BOOT_H__
#define __ASM_U_BOOT_H__ 1
+#ifdef CONFIG_SYS_GENERIC_BOARD
+/* Use the generic board which requires a unified bd_info */
+#include <asm-generic/u-boot.h>
+#else
+
typedef struct bd_info {
unsigned char bi_phy_id[4];
unsigned long bi_board_number;
@@ -22,7 +27,12 @@ typedef struct bd_info {
#define bi_memstart bi_dram[0].start
#define bi_memsize bi_dram[0].size
+#endif
+
/* For image.h:image_check_target_arch() */
#define IH_ARCH_DEFAULT IH_ARCH_AVR32
+int arch_cpu_init(void);
+int dram_init(void);
+
#endif /* __ASM_U_BOOT_H__ */
diff --git a/arch/avr32/lib/Makefile b/arch/avr32/lib/Makefile
index bb45cbe..6750913 100644
--- a/arch/avr32/lib/Makefile
+++ b/arch/avr32/lib/Makefile
@@ -8,6 +8,9 @@
#
obj-y += memset.o
+ifndef CONFIG_SYS_GENERIC_BOARD
obj-y += board.o
+endif
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-y += interrupts.o
+obj-y += dram_init.o
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index bf0997f..99aa96e 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -9,7 +9,6 @@
#include <stdio_dev.h>
#include <version.h>
#include <net.h>
-#include <atmel_mci.h>
#ifdef CONFIG_BITBANGMII
#include <miiphy.h>
@@ -30,6 +29,12 @@ DECLARE_GLOBAL_DATA_PTR;
unsigned long monitor_flash_len;
+__weak void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
/* Weak aliases for optional board functions */
static int __do_nothing(void)
{
@@ -38,57 +43,6 @@ static int __do_nothing(void)
int board_postclk_init(void) __attribute__((weak, alias("__do_nothing")));
int board_early_init_r(void) __attribute__((weak, alias("__do_nothing")));
-/* provide cpu_mmc_init, to overwrite provide board_mmc_init */
-int cpu_mmc_init(bd_t *bd)
-{
- /* This calls the atmel_mci_init in gen_atmel_mci.c */
- return atmel_mci_init((void *)ATMEL_BASE_MMCI);
-}
-
-#ifdef CONFIG_SYS_DMA_ALLOC_LEN
-#include <asm/arch/cacheflush.h>
-#include <asm/io.h>
-
-static unsigned long dma_alloc_start;
-static unsigned long dma_alloc_end;
-static unsigned long dma_alloc_brk;
-
-static void dma_alloc_init(void)
-{
- unsigned long monitor_addr;
-
- monitor_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
- dma_alloc_end = monitor_addr - CONFIG_SYS_MALLOC_LEN;
- dma_alloc_start = dma_alloc_end - CONFIG_SYS_DMA_ALLOC_LEN;
- dma_alloc_brk = dma_alloc_start;
-
- printf("DMA: Using memory from 0x%08lx to 0x%08lx\n",
- dma_alloc_start, dma_alloc_end);
-
- invalidate_dcache_range((unsigned long)cached(dma_alloc_start),
- dma_alloc_end);
-}
-
-void *dma_alloc_coherent(size_t len, unsigned long *handle)
-{
- unsigned long paddr = dma_alloc_brk;
-
- if (dma_alloc_brk + len > dma_alloc_end)
- return NULL;
-
- dma_alloc_brk = ((paddr + len + CONFIG_SYS_DCACHE_LINESZ - 1)
- & ~(CONFIG_SYS_DCACHE_LINESZ - 1));
-
- *handle = paddr;
- return uncached(paddr);
-}
-#else
-static inline void dma_alloc_init(void)
-{
-
-}
-#endif
-
static int init_baudrate(void)
{
gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
@@ -134,7 +88,6 @@ void board_init_f(ulong board_type)
unsigned long monitor_len;
unsigned long monitor_addr;
unsigned long addr;
- long sdram_size;
/* Initialize the global data pointer */
memset(&gd_data, 0, sizeof(gd_data));
@@ -142,17 +95,17 @@ void board_init_f(ulong board_type)
/* Perform initialization sequence */
board_early_init_f();
- cpu_init();
+ arch_cpu_init();
board_postclk_init();
env_init();
init_baudrate();
serial_init();
console_init_f();
display_banner();
- sdram_size = initdram(board_type);
+ dram_init();
/* If we have no SDRAM, we can't go on */
- if (sdram_size <= 0)
+ if (gd->ram_size <= 0)
panic("No working SDRAM available\n");
/*
@@ -166,7 +119,7 @@ void board_init_f(ulong board_type)
* - global data struct
* - stack
*/
- addr = CONFIG_SYS_SDRAM_BASE + sdram_size;
+ addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
monitor_len = (char *)(&__bss_end) - _text;
/*
@@ -180,12 +133,6 @@ void board_init_f(ulong board_type)
/* Reserve memory for malloc() */
addr -= CONFIG_SYS_MALLOC_LEN;
-#ifdef CONFIG_SYS_DMA_ALLOC_LEN
- /* Reserve DMA memory (must be cache aligned) */
- addr &= ~(CONFIG_SYS_DCACHE_LINESZ - 1);
- addr -= CONFIG_SYS_DMA_ALLOC_LEN;
-#endif
-
#ifdef CONFIG_LCD
#ifdef CONFIG_FB_ADDR
printf("LCD: Frame buffer allocated at preset 0x%08x\n",
@@ -210,16 +157,11 @@ void board_init_f(ulong board_type)
/* And finally, a new, bigger stack. */
new_sp = (unsigned long *)addr;
- gd->arch.stack_end = addr;
+ gd->start_addr_sp = addr;
*(--new_sp) = 0;
*(--new_sp) = 0;
- /*
- * Initialize the board information struct with the
- * information we have.
- */
- bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
- bd->bi_dram[0].size = sdram_size;
+ dram_init_banksize();
memcpy(new_gd, gd, sizeof(gd_t));
@@ -264,7 +206,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
/* The malloc area is right below the monitor image in RAM */
mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN);
- dma_alloc_init();
enable_interrupts();
diff --git a/arch/avr32/lib/dram_init.c b/arch/avr32/lib/dram_init.c
new file mode 100644
index 0000000..5078e77
--- /dev/null
+++ b/arch/avr32/lib/dram_init.c
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2015 Andreas Bießmann <andreas.devel@googlemail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ /* check for the maximum amount of memory possible on AP7000 devices */
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ (256<<20));
+ return 0;
+}
diff --git a/arch/avr32/lib/interrupts.c b/arch/avr32/lib/interrupts.c
index bacb2d1..5f3a49e 100644
--- a/arch/avr32/lib/interrupts.c
+++ b/arch/avr32/lib/interrupts.c
@@ -7,6 +7,11 @@
#include <asm/sysreg.h>
+int interrupt_init(void)
+{
+ return 0;
+}
+
void enable_interrupts(void)
{
asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET));
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index 71bb9d7..7202c3f 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -424,6 +424,14 @@ phys_size_t initdram(int board_type)
int write_recovery;
phys_size_t dram_size = 0;
+ if (IS_ENABLED(CONFIG_SYS_RAMBOOT)) {
+ /*
+ * Reduce RAM size to avoid overwriting memory used by
+ * current stack? Not sure what is happening.
+ */
+ return sdram_memsize() / 2;
+ }
+
num_dimm_banks = sizeof(iic0_dimm_addr);
/*------------------------------------------------------------------
diff --git a/arch/powerpc/cpu/ppc4xx/config.mk b/arch/powerpc/cpu/ppc4xx/config.mk
index f87c9dc..9cb41bb 100644
--- a/arch/powerpc/cpu/ppc4xx/config.mk
+++ b/arch/powerpc/cpu/ppc4xx/config.mk
@@ -7,10 +7,7 @@
PLATFORM_CPPFLAGS += -mstring -msoft-float
-cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h
-is440:=$(shell grep CONFIG_440 $(cfg))
-
-ifneq (,$(findstring CONFIG_440,$(is440)))
+ifneq (,$(CONFIG_440))
PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
else
PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c
index e5a0e21..5f5c720 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu_init.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c
@@ -450,10 +450,12 @@ cpu_init_f (void)
PLB4Ax_ACR_RDP_4DEEP);
#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
+#ifndef CONFIG_SYS_GENERIC_BOARD
gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* Clear initial global data */
memset((void *)gd, 0, sizeof(gd_t));
+#endif
}
/*
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 09a02d7..7a0f0d2 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -760,6 +760,15 @@ _start:
#endif
bl cpu_init_f /* run low-level CPU init code (from Flash) */
+#ifdef CONFIG_SYS_GENERIC_BOARD
+ mr r3, r1
+ bl board_init_f_mem
+ mr r1, r3
+ li r0,0
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+#endif
+ li r3, 0
bl board_init_f
/* NOTREACHED - board_init_f() does not return */
@@ -1027,7 +1036,14 @@ _start:
GET_GOT /* initialize GOT access */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
+#ifdef CONFIG_SYS_GENERIC_BOARD
+ mr r3, r1
+ bl board_init_f_mem
+ mr r1, r3
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+#endif
+ li r3, 0
bl board_init_f /* run first part of init code (from Flash) */
/* NOTREACHED - board_init_f() does not return */
diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds
index 8773178..1980508 100644
--- a/arch/powerpc/cpu/ppc4xx/u-boot.lds
+++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds
@@ -76,9 +76,13 @@ SECTIONS
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
+ .data.init : {
+ *(.data.init)
+ . = ALIGN(256);
+ LONG(0) LONG(0) /* Extend u-boot.bin to here */
+ }
__init_end = .;
+ _end = .;
#ifndef CONFIG_SPL
#ifdef CONFIG_440
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
new file mode 100644
index 0000000..ad104b9
--- /dev/null
+++ b/arch/powerpc/dts/Makefile
@@ -0,0 +1,11 @@
+dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
diff --git a/arch/powerpc/dts/arches.dts b/arch/powerpc/dts/arches.dts
new file mode 100644
index 0000000..bd5ebfd
--- /dev/null
+++ b/arch/powerpc/dts/arches.dts
@@ -0,0 +1,339 @@
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ * Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,arches";
+ compatible = "amcc,arches";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <3>;
+ num-rx-chans = <24>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x00400000 0x01b60000>;
+ };
+ partition@1f60000 {
+ label = "env";
+ reg = <0x01f60000 0x00040000>;
+ };
+ partition@1fa0000 {
+ label = "u-boot";
+ reg = <0x01fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sttm@4a {
+ compatible = "ad,ad7414";
+ reg = <0x4a>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x0 0x8>;
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "sgmii";
+ phy-map = <0xffffffff>;
+ gpcs-address = <0x0000000a>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "sgmii";
+ phy-map = <0x00000000>;
+ gpcs-address = <0x0000000b>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <16>;
+ cell-index = <2>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
+ phy-mode = "sgmii";
+ phy-map = <0x00000001>;
+ gpcs-address = <0x0000000C>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/dts/canyonlands.dts b/arch/powerpc/dts/canyonlands.dts
new file mode 100644
index 0000000..0a2f5d7
--- /dev/null
+++ b/arch/powerpc/dts/canyonlands.dts
@@ -0,0 +1,561 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,canyonlands";
+ compatible = "amcc,canyonlands";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ chosen {
+ stdout-path = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460EX";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460ex";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460ex";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x160 0x003>;
+ unused-units = <0x00000100>;
+ idle-doze = <0x02000000>;
+ standby = <0xfeff791d>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460ex", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ HWRNG: hwrng@110000 {
+ compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+ reg = <4 0x00110000 0x50>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <16>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ };
+
+ USB0: ehci@bffd0400 {
+ compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1d 4>;
+ reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+ };
+
+ USB1: usb@bffd0000 {
+ compatible = "ohci-le";
+ reg = <4 0xbffd0000 0x60>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1e 4>;
+ };
+
+ USBOTG0: usbotg@bff80000 {
+ compatible = "amcc,dwc-otg";
+ reg = <0x4 0xbff80000 0x10000>;
+ interrupt-parent = <&USBOTG0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x1 0x2>;
+ interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+ /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+ /* DMA */ 0x2 &UIC0 0xc 0x4>;
+ };
+
+ SATA0: sata@bffd1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x0 0x4 /* SATA */
+ 0x5 0x4>; /* AHBDMA */
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460ex", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <0x03fa0000 0x00060000>;
+ };
+ };
+
+ cpld@2,0 {
+ compatible = "amcc,ppc460ex-bcsr";
+ reg = <2 0x0 0x9>;
+ };
+
+ ndfc@3,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "user";
+ reg = <0x00000000 0x03f00000>;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 0x8>;
+ };
+ sttm@48 {
+ compatible = "ad,ad7414";
+ reg = <0x48>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 0x8>;
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ GPIO0: gpio@ef600b00 {
+ compatible = "ibm,ppc4xx-gpio";
+ reg = <0xef600b00 0x00000048>;
+ gpio-controller;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460ex", "ibm,zmii";
+ reg = <0xef600d00 0x0000000c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+ reg = <0xef601500 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0x0 0x3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <0x40 0x7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <0x80 0xbf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+ };
+
+ MSI: ppc4xx-msi@C10000000 {
+ compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+ reg = < 0xC 0x10000000 0x100>;
+ sdr-base = <0x36C>;
+ msi-data = <0x00000000>;
+ msi-mask = <0x44440000>;
+ interrupt-count = <3>;
+ interrupts = <0 1 2 3>;
+ interrupt-parent = <&UIC3>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &UIC3 0x18 1
+ 1 &UIC3 0x19 1
+ 2 &UIC3 0x1A 1
+ 3 &UIC3 0x1B 1>;
+ };
+ };
+};
diff --git a/arch/powerpc/dts/glacier.dts b/arch/powerpc/dts/glacier.dts
new file mode 100644
index 0000000..bb4e819
--- /dev/null
+++ b/arch/powerpc/dts/glacier.dts
@@ -0,0 +1,582 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,glacier";
+ compatible = "amcc,glacier";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ chosen {
+ stdout-path = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto",
+ "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ HWRNG: hwrng@110000 {
+ compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+ reg = <4 0x00110000 0x50>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <4>;
+ num-rx-chans = <32>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <0x03fa0000 0x00060000>;
+ };
+ };
+
+ ndfc@3,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "user";
+ reg = <0x00000000 0x03f00000>;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <28 0x4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <29 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 0x8>;
+ };
+ sttm@48 {
+ compatible = "ad,ad7414";
+ reg = <0x48>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 0x8>;
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460gt", "ibm,zmii";
+ reg = <0xef600d00 0x0000000c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <0xef601500 0x00000008>;
+ has-mdio;
+ };
+
+ RGMII1: emac-rgmii@ef601600 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <0xef601600 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <16>;
+ cell-index = <2>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC3: ethernet@ef601200 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC3>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x17 0x4>;
+ reg = <0xef601200 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <24>;
+ cell-index = <3>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0x0 0x3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <0x40 0x7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <0x80 0xbf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+ };
+ };
+};
diff --git a/arch/powerpc/include/asm/arch-ppc4xx/gpio.h b/arch/powerpc/include/asm/arch-ppc4xx/gpio.h
new file mode 100644
index 0000000..3d960c3
--- /dev/null
+++ b/arch/powerpc/include/asm/arch-ppc4xx/gpio.h
@@ -0,0 +1,7 @@
+/*
+ * (C) Copyright 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* This is empty for now as we don't support the generic GPIO interface */
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
new file mode 100644
index 0000000..559b42e
--- /dev/null
+++ b/arch/powerpc/include/asm/linkage.h
@@ -0,0 +1,7 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* We don't need anything here at present */
diff --git a/arch/powerpc/include/asm/ppc460ex_gt.h b/arch/powerpc/include/asm/ppc460ex_gt.h
index f41df0d..ea019aa 100644
--- a/arch/powerpc/include/asm/ppc460ex_gt.h
+++ b/arch/powerpc/include/asm/ppc460ex_gt.h
@@ -19,10 +19,12 @@
/* Memory mapped registers */
#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
+#endif
#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 0f62982..05b22bb 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -40,6 +40,7 @@ obj-y += extable.o
obj-y += interrupts.o
obj-$(CONFIG_CMD_KGDB) += kgdb.o
obj-$(CONFIG_CMD_IDE) += ide.o
+obj-y += stack.o
obj-y += time.o
# Don't include the MPC5xxx special memcpy into the
diff --git a/arch/powerpc/lib/stack.c b/arch/powerpc/lib/stack.c
new file mode 100644
index 0000000..1985f03
--- /dev/null
+++ b/arch/powerpc/lib/stack.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2015 Andreas Bießmann <andreas.devel@googlemail.com>
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2002-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_reserve_stacks(void)
+{
+ ulong *s;
+
+ /* setup stack pointer for exceptions */
+ gd->irq_sp = gd->start_addr_sp;
+
+ /* Clear initial stack frame */
+ s = (ulong *)gd->start_addr_sp;
+ *s = 0; /* Terminate back chain */
+ *++s = 0; /* NULL return address */
+
+ return 0;
+}
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index 3057325..2098b9c 100644
--- a/arch/sandbox/Kconfig
+++ b/arch/sandbox/Kconfig
@@ -10,4 +10,28 @@ config SYS_BOARD
config SYS_CONFIG_NAME
default "sandbox"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_CROS_EC
+ default y
+
+config DM_SPI
+ default y
+
+config DM_SPI_FLASH
+ default y
+
+config DM_I2C
+ default y
+
+config DM_TEST
+ default y
+
endmenu
diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk
index e38a44b..7b84f02 100644
--- a/arch/sandbox/config.mk
+++ b/arch/sandbox/config.mk
@@ -5,10 +5,16 @@ PLATFORM_CPPFLAGS += -D__SANDBOX__ -U_FORTIFY_SOURCE
PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM -DCONFIG_SYS_GENERIC_BOARD
PLATFORM_LIBS += -lrt
+# Define this to avoid linking with SDL, which requires SDL libraries
+# This can solve 'sdl-config: Command not found' errors
+ifneq ($(NO_SDL),)
+PLATFORM_CPPFLAGS += -DSANDBOX_NO_SDL
+else
ifdef CONFIG_SANDBOX_SDL
PLATFORM_LIBS += $(shell sdl-config --libs)
PLATFORM_CPPFLAGS += $(shell sdl-config --cflags)
endif
+endif
# Support generic board on sandbox
__HAVE_ARCH_GENERIC_BOARD := y
@@ -18,9 +24,3 @@ cmd_u-boot__ = $(CC) -o $@ -T u-boot.lds \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map
CONFIG_ARCH_DEVICE_TREE := sandbox
-
-# Define this to avoid linking with SDL, which requires SDL libraries
-# This can solve 'sdl-config: Command not found' errors
-ifneq ($(NO_SDL),)
-PLATFORM_CPPFLAGS += -DSANDBOX_NO_SDL
-endif
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c
index 097f29a..ec01040 100644
--- a/arch/sandbox/cpu/start.c
+++ b/arch/sandbox/cpu/start.c
@@ -78,11 +78,13 @@ int sandbox_main_loop_init(void)
/* Execute command if required */
if (state->cmd) {
+ int retval;
+
cli_init();
- run_command_list(state->cmd, -1, 0);
+ retval = run_command_list(state->cmd, -1, 0);
if (!state->interactive)
- os_exit(state->exit_type);
+ os_exit(retval);
}
return 0;
diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c
index ba73b7e..033958c 100644
--- a/arch/sandbox/cpu/state.c
+++ b/arch/sandbox/cpu/state.c
@@ -13,11 +13,6 @@
static struct sandbox_state main_state;
static struct sandbox_state *state; /* Pointer to current state record */
-void state_record_exit(enum exit_type_id exit_type)
-{
- state->exit_type = exit_type;
-}
-
static int state_ensure_space(int extra_size)
{
void *blob = state->state_fdt;
diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h
index 32d55cc..a0c24ba 100644
--- a/arch/sandbox/include/asm/state.h
+++ b/arch/sandbox/include/asm/state.h
@@ -10,13 +10,6 @@
#include <stdbool.h>
#include <linux/stringify.h>
-/* How we exited U-Boot */
-enum exit_type_id {
- STATE_EXIT_NORMAL,
- STATE_EXIT_COLD_REBOOT,
- STATE_EXIT_POWER_OFF,
-};
-
/**
* Selects the behavior of the serial terminal.
*
@@ -50,7 +43,6 @@ struct sandbox_state {
const char *cmd; /* Command to execute */
bool interactive; /* Enable cmdline after execute */
const char *fdt_fname; /* Filename of FDT binary */
- enum exit_type_id exit_type; /* How we exited U-Boot */
const char *parse_err; /* Error to report from parsing */
int argc; /* Program arguments */
char **argv; /* Command line arguments */
@@ -139,13 +131,6 @@ struct sandbox_state_io {
}
/**
- * Record the exit type to be reported by the test program.
- *
- * @param exit_type Exit type to record
- */
-void state_record_exit(enum exit_type_id exit_type);
-
-/**
* Gets a pointer to the current state.
*
* @return pointer to state
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fef11f3..35d24e4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -67,6 +67,21 @@ config TARGET_GALILEO
endchoice
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x800
+
config RAMBASE
hex
default 0x100000
diff --git a/board/BuS/eb_cpux9k2/Kconfig b/board/BuS/eb_cpux9k2/Kconfig
index 230e64d..e2a787a 100644
--- a/board/BuS/eb_cpux9k2/Kconfig
+++ b/board/BuS/eb_cpux9k2/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "BuS"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "eb_cpux9k2"
diff --git a/board/BuS/vl_ma2sc/Kconfig b/board/BuS/vl_ma2sc/Kconfig
index 2f43519..848177f 100644
--- a/board/BuS/vl_ma2sc/Kconfig
+++ b/board/BuS/vl_ma2sc/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "BuS"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "vl_ma2sc"
diff --git a/board/Marvell/dkb/Kconfig b/board/Marvell/dkb/Kconfig
deleted file mode 100644
index f674894..0000000
--- a/board/Marvell/dkb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_DKB
-
-config SYS_BOARD
- default "dkb"
-
-config SYS_VENDOR
- default "Marvell"
-
-config SYS_SOC
- default "pantheon"
-
-config SYS_CONFIG_NAME
- default "dkb"
-
-endif
diff --git a/board/Marvell/dkb/MAINTAINERS b/board/Marvell/dkb/MAINTAINERS
deleted file mode 100644
index c272b7a..0000000
--- a/board/Marvell/dkb/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DKB BOARD
-M: Lei Wen <leiwen@marvell.com>
-S: Maintained
-F: board/Marvell/dkb/
-F: include/configs/dkb.h
-F: configs/dkb_defconfig
diff --git a/board/Marvell/dkb/Makefile b/board/Marvell/dkb/Makefile
deleted file mode 100644
index 9d88579..0000000
--- a/board/Marvell/dkb/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2011
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Lei Wen <leiwen@marvell.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := dkb.o
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
deleted file mode 100644
index c0c3125..0000000
--- a/board/Marvell/dkb/dkb.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mvmfp.h>
-#include <i2c.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/cpu.h>
-#ifdef CONFIG_GENERIC_MMC
-#include <sdhci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- u32 mfp_cfg[] = {
- /* Enable Console on UART2 */
- MFP47_UART2_RXD,
- MFP48_UART2_TXD,
-
- /* I2C */
- MFP53_CI2C_SCL,
- MFP54_CI2C_SDA,
-
- /* MMC1 */
- MFP_MMC1_DAT7,
- MFP_MMC1_DAT6,
- MFP_MMC1_DAT5,
- MFP_MMC1_DAT4,
- MFP_MMC1_DAT3,
- MFP_MMC1_DAT2,
- MFP_MMC1_DAT1,
- MFP_MMC1_DAT0,
- MFP_MMC1_CMD,
- MFP_MMC1_CLK,
- MFP_MMC1_CD,
- MFP_MMC1_WP,
-
- MFP_EOC /*End of configureation*/
- };
- /* configure MFP's */
- mfp_config(mfp_cfg);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* arch number of Board */
- gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100;
- return 0;
-}
-
-#ifdef CONFIG_GENERIC_MMC
-#define I2C_SLAVE_ADDR 0x34
-#define LDO13_REG 0x28
-#define LDO_V30 0x6
-#define LDO_VOLTAGE(x) ((x & 0x7) << 1)
-#define LDO_EN 0x1
-int board_mmc_init(bd_t *bd)
-{
- ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE;
- u8 i, data;
-
- /* set LDO 13 to 3.0v */
- data = LDO_VOLTAGE(LDO_V30) | LDO_EN;
- i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1);
-
- for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) {
- if (mv_sdh_init(mmc_base_address[i], 0, 0,
- SDHCI_QUIRK_32BIT_DMA_ADDR))
- return 1;
- }
-
- return 0;
-}
-#endif
diff --git a/board/afeb9260/Kconfig b/board/afeb9260/Kconfig
index 6a5a931..fb64c9c 100644
--- a/board/afeb9260/Kconfig
+++ b/board/afeb9260/Kconfig
@@ -3,9 +3,6 @@ if TARGET_AFEB9260
config SYS_BOARD
default "afeb9260"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "afeb9260"
diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
index 530a6ef..848e08f 100644
--- a/board/amcc/canyonlands/Kconfig
+++ b/board/amcc/canyonlands/Kconfig
@@ -9,4 +9,42 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "canyonlands"
+choice BOARD_TYPE
+ prompt "Select which board to build for"
+
+config CANYONLANDS
+ bool "Glacier"
+ help
+ Select this to build for the Canyonlands 460EX board.
+
+config GLACIER
+ bool "Glacier"
+ help
+ Select this to build for the Glacier 460GT board.
+
+config ARCHES
+ bool "Arches"
+ help
+ Select this to build for the Arches dual 460GT board.
+
+endchoice
+
+config DISPLAY_BOARDINFO
+ bool
+ default y
+
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config SYS_MALLOC_F
+ bool
+ default y
+
+config SYS_MALLOC_F_LEN
+ hex
+ default 0x400
+
endif
diff --git a/board/amcc/canyonlands/MAINTAINERS b/board/amcc/canyonlands/MAINTAINERS
index 52bf004..8be8a52 100644
--- a/board/amcc/canyonlands/MAINTAINERS
+++ b/board/amcc/canyonlands/MAINTAINERS
@@ -6,3 +6,4 @@ F: include/configs/canyonlands.h
F: configs/arches_defconfig
F: configs/canyonlands_defconfig
F: configs/glacier_defconfig
+F: configs/glacier_ramboot_defconfig
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
index 63b8973..5cc90d2 100644
--- a/board/amcc/canyonlands/config.mk
+++ b/board/amcc/canyonlands/config.mk
@@ -8,8 +8,6 @@
# AMCC 460EX/460GT Evaluation Board (Canyonlands) board
#
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif
diff --git a/board/amcc/canyonlands/u-boot-ram.lds b/board/amcc/canyonlands/u-boot-ram.lds
new file mode 100644
index 0000000..1750c74
--- /dev/null
+++ b/board/amcc/canyonlands/u-boot-ram.lds
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .text :
+ {
+ _image_copy_start = .;
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/canyonlands/init.o (.text*)
+
+ *(.text*)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ KEEP(*(.got))
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ _FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data*)
+ *(.sdata*)
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : {
+ *(.data.init)
+ . = ALIGN(256);
+ LONG(0) LONG(0) /* Extend u-boot.bin to here */
+ }
+ __init_end = .;
+ _end = .;
+ _image_binary_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.bss*)
+ *(.sbss*)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+
+ __bss_end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/atmel/at91rm9200ek/Kconfig b/board/atmel/at91rm9200ek/Kconfig
index bad4a37..952351d 100644
--- a/board/atmel/at91rm9200ek/Kconfig
+++ b/board/atmel/at91rm9200ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91rm9200ek"
diff --git a/board/atmel/at91sam9260ek/Kconfig b/board/atmel/at91sam9260ek/Kconfig
index fe00ed5..3844f08 100644
--- a/board/atmel/at91sam9260ek/Kconfig
+++ b/board/atmel/at91sam9260ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9260ek"
diff --git a/board/atmel/at91sam9261ek/Kconfig b/board/atmel/at91sam9261ek/Kconfig
index d839c1a..2971b3c 100644
--- a/board/atmel/at91sam9261ek/Kconfig
+++ b/board/atmel/at91sam9261ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9261ek"
diff --git a/board/atmel/at91sam9263ek/Kconfig b/board/atmel/at91sam9263ek/Kconfig
index 311c504..3f0873f 100644
--- a/board/atmel/at91sam9263ek/Kconfig
+++ b/board/atmel/at91sam9263ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9263ek"
diff --git a/board/atmel/at91sam9m10g45ek/Kconfig b/board/atmel/at91sam9m10g45ek/Kconfig
index 1bc086a..211c411 100644
--- a/board/atmel/at91sam9m10g45ek/Kconfig
+++ b/board/atmel/at91sam9m10g45ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9m10g45ek"
diff --git a/board/atmel/at91sam9n12ek/Kconfig b/board/atmel/at91sam9n12ek/Kconfig
index cf1d1a3..816003a 100644
--- a/board/atmel/at91sam9n12ek/Kconfig
+++ b/board/atmel/at91sam9n12ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9n12ek"
diff --git a/board/atmel/at91sam9rlek/Kconfig b/board/atmel/at91sam9rlek/Kconfig
index 438d300..81a839a 100644
--- a/board/atmel/at91sam9rlek/Kconfig
+++ b/board/atmel/at91sam9rlek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9rlek"
diff --git a/board/atmel/at91sam9x5ek/Kconfig b/board/atmel/at91sam9x5ek/Kconfig
index 5c5ec61..3f92754 100644
--- a/board/atmel/at91sam9x5ek/Kconfig
+++ b/board/atmel/at91sam9x5ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "at91sam9x5ek"
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 03d767a..dacd427 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -18,14 +18,14 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -52,6 +52,8 @@ int board_early_init_f(void)
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
@@ -68,24 +70,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/atmel/atngw100mkii/atngw100mkii.c b/board/atmel/atngw100mkii/atngw100mkii.c
index 72d19e4..8e215d5 100644
--- a/board/atmel/atngw100mkii/atngw100mkii.c
+++ b/board/atmel/atngw100mkii/atngw100mkii.c
@@ -23,21 +23,21 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
/* Atmel AT49BV640D 8 MiB x16 NOR flash on NCS0 */
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
/* Micron MT29F2G16AAD 256 MiB x16 NAND flash on NCS3 */
- .virt_pgno = EBI_SRAM_CS3_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SRAM_CS3_SIZE >> PAGE_SHIFT,
- .phys = (EBI_SRAM_CS3_BASE >> PAGE_SHIFT)
+ .virt_pgno = EBI_SRAM_CS3_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SRAM_CS3_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (EBI_SRAM_CS3_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
/* 2x16-bit ISSI IS42S16320B 64 MiB SDRAM (128 MiB total) */
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -69,6 +69,9 @@ int board_early_init_f(void)
portmux_select_gpio(PORTMUX_PORT_E, 1 << 23,
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH
| PORTMUX_DRIVE_MIN);
+
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
@@ -85,24 +88,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 4b6b90f..fd4363b 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -17,14 +17,14 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -78,7 +78,10 @@ int board_early_init_f(void)
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
+
#if defined(CONFIG_MACB)
portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
@@ -90,24 +93,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x10;
diff --git a/board/atmel/sama5d3_xplained/Kconfig b/board/atmel/sama5d3_xplained/Kconfig
index 0ba8a7b..2df751a 100644
--- a/board/atmel/sama5d3_xplained/Kconfig
+++ b/board/atmel/sama5d3_xplained/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "sama5d3_xplained"
diff --git a/board/atmel/sama5d3xek/Kconfig b/board/atmel/sama5d3xek/Kconfig
index 2a9ed23..abd1ad8 100644
--- a/board/atmel/sama5d3xek/Kconfig
+++ b/board/atmel/sama5d3xek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "sama5d3xek"
diff --git a/board/atmel/sama5d4_xplained/Kconfig b/board/atmel/sama5d4_xplained/Kconfig
index f320a68..2cb03cb 100644
--- a/board/atmel/sama5d4_xplained/Kconfig
+++ b/board/atmel/sama5d4_xplained/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "sama5d4_xplained"
diff --git a/board/atmel/sama5d4ek/Kconfig b/board/atmel/sama5d4ek/Kconfig
index 7dc569c..1a63403 100644
--- a/board/atmel/sama5d4ek/Kconfig
+++ b/board/atmel/sama5d4ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "atmel"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "sama5d4ek"
diff --git a/board/bluewater/snapper9260/Kconfig b/board/bluewater/snapper9260/Kconfig
index c896c46..b8e9cbc 100644
--- a/board/bluewater/snapper9260/Kconfig
+++ b/board/bluewater/snapper9260/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "bluewater"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "snapper9260"
diff --git a/board/buffalo/lsxl/README b/board/buffalo/lsxl/README
new file mode 100644
index 0000000..ef5ed42
--- /dev/null
+++ b/board/buffalo/lsxl/README
@@ -0,0 +1,139 @@
+Intro
+-----
+The Buffalo Linkstation Pro/Live, codename LS-XHL and LS-CHLv2, is a single
+disk NAS server. The PCBs of the LS-XHL and LS-CHLv2 are almost the same.
+The LS-XHL has a faster CPU and more RAM with a wider data bus, therefore
+the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell
+88F6281). The only on-board storage is a 4 Mbit SPI flash which stores the
+bootloader and its environment. The linux kernel and the initial ramdisk
+are loaded from the hard disk.
+
+
+Rescue Mode
+-----------
+These linkstations don't have a populated serial port. There is no way to
+access an (unmodified) board other than using the netconsole. If you want
+to recover from a bad environment setting or an empty environment, you can
+do this only with a working network connection.
+
+Therefore, on entering the resuce mode, a random ethernet address is
+generated if no valid address could be loaded from the environment variable
+'ethaddr' and a DHCP request is sent. After a successful DHCP response is
+received, the network settings are configured and the ncip is unset. Thus
+all netconsole packets are broadcasted and you can use the netconsole to
+access board from any host within the network segment. To determine the IP
+address assigned to the board, you either have to sniff the traffic or
+check the logs/leases of your DHCP server.
+
+The resuce mode is selected by holding the push button for at least one
+second, while powering-on the device. The status LED turns solid amber if
+the resuce mode is enabled, thus providing a visual feedback.
+
+Pressing the same button for at least 10 seconds on power-up will erase the
+environment and reset the board. In this case the visual indication will
+be:
+- blinking blue, for about one second
+- solid amber, for about nine seconds
+- blinking amber, until you release the button
+
+This ensures, that you still can recover a device with a broken
+environment by first erasing the environment and then entering the rescue
+mode.
+
+Once the rescue mode is started, use the ncb binary from the tools/
+directory to access your board. There is a helper script named
+'restore_env' to save your changes. It unsets all the network variables
+which were set by the rescue mode, saves your changes and then resets the
+board.
+
+The common use case for this is setting a MAC address. Let us assume you
+have an empty environment, the board comes up with the amber LED blinking.
+Then you enter the rescue mode, connect to the board with the ncb tool and
+use the following commands to set your MAC address:
+
+ setenv ethaddr 00:00:00:00:00:00
+ run restore_env
+
+Of course you need to replace the 00:00:00:00:00:00 with your valid MAC
+address, which can be found on a sticker on the bottom of your box.
+
+
+Status LED
+----------
+blinking blue
+ Bootloader is running normally.
+
+blinking amber
+ No ethaddr set. Use the `Rescue Mode` to set one.
+
+blinking red
+ Something bad happend during loading the operating system.
+
+The default behavior of the linux kernel is to turn on the blue LED. So if
+the blinking blue LED changes to solid blue the kernel was loaded
+successfully.
+
+
+Power-on Switch
+---------------
+The power-on switch is a software switch. If it is not in ON position when
+the bootloader starts, the bootloader will disable the HDD and USB power
+and stop the fan. Then it loops until the switch is in ON position again,
+enables the power and fan again and continue booting.
+
+
+Boot sources
+------------
+The environment defines several different boot sources:
+
+legacy
+ This is the default boot source. It loads the kernel and ramdisk from the
+ attached HDD using the original filenames. The load addresses were
+ modified to support loading larger kernels. But it should behave the same
+ as the original bootloader.
+
+hdd
+ Use this for new-style booting. Loads three files /vmlinuz, /initrd.img
+ and /dtb from the boot partition. This should work out of the box if you
+ have debian and the flash-kernel package installed.
+
+usb
+ Same as hdd expect, that the files are loaded from an attached USB mass
+ storage device and the filename for the device tree is kirkwood-lsxhl.dtb
+ (or kirkwood-lschlv2.dtb).
+
+net
+ Same as usb expect, that the file are loaded from the network.
+
+rescue
+ Automatically activated if the push button is pressed for at least one
+ second on power-up. Does a DHCP request and enables the network console.
+ See `Rescue Mode` for more information.
+
+You can change the boot source by setting the 'bootsource' variable to the
+corresponding value. Please note, that the restore_env script will the the
+bootsource back to 'legacy'.
+
+
+Flash map
+---------
+00000 - 5ffff u-boot
+60000 - 6ffff reserved, may be used to store dtb
+70000 - 7ffff u-boot environment
+
+
+Compiling
+---------
+make lsxhl_config (or lschlv2_config)
+make u-boot.kwb
+
+
+Update your board
+-----------------
+Just flash the resulting u-boot.kwb to the beginning of the SPI flash. If
+you already have a bootloader CLI, you can use the following commands:
+
+ sf probe 0
+ bootp ${loadaddr} u-boot.kwb
+ sf erase 0 +${filelen}
+ sf write 0 ${fileaddr} ${filesize}
diff --git a/board/calao/sbc35_a9g20/Kconfig b/board/calao/sbc35_a9g20/Kconfig
index fb5a1a3..37ecfb5 100644
--- a/board/calao/sbc35_a9g20/Kconfig
+++ b/board/calao/sbc35_a9g20/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "calao"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "sbc35_a9g20"
diff --git a/board/calao/tny_a9260/Kconfig b/board/calao/tny_a9260/Kconfig
index b1de8f8..2b66329 100644
--- a/board/calao/tny_a9260/Kconfig
+++ b/board/calao/tny_a9260/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "calao"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "tny_a9260"
diff --git a/board/calao/usb_a9263/Kconfig b/board/calao/usb_a9263/Kconfig
index 7a159dc..19e446d 100644
--- a/board/calao/usb_a9263/Kconfig
+++ b/board/calao/usb_a9263/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "calao"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "usb_a9263"
diff --git a/board/cm4008/Kconfig b/board/cm4008/Kconfig
deleted file mode 100644
index de87d5b..0000000
--- a/board/cm4008/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CM4008
-
-config SYS_BOARD
- default "cm4008"
-
-config SYS_SOC
- default "ks8695"
-
-config SYS_CONFIG_NAME
- default "cm4008"
-
-endif
diff --git a/board/cm4008/MAINTAINERS b/board/cm4008/MAINTAINERS
deleted file mode 100644
index 5f08bc3..0000000
--- a/board/cm4008/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM4008 BOARD
-M: Greg Ungerer <greg.ungerer@opengear.com>
-S: Maintained
-F: board/cm4008/
-F: include/configs/cm4008.h
-F: configs/cm4008_defconfig
diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
deleted file mode 100644
index 04b1529..0000000
--- a/board/cm4008/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := cm4008.o flash.o
diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c
deleted file mode 100644
index 740e164..0000000
--- a/board/cm4008/cm4008.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
-#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int env_flash_cmdline (void)
-{
- char *sp = (char *) 0x0201c020;
- char *ep;
- int len;
-
- /* Check if "erase" push button is depressed */
- if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
- printf("### Entering network recovery mode...\n");
- setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0");
- setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
- setenv("bootdelay", "2");
- return 0;
- }
-
- /* Check for flash based kernel boot args to use as default */
- for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
- ;
-
- if ((len > 0) && (len <1024))
- setenv("bootargs", sp);
-
- return 0;
-}
-
-int board_late_init (void)
-{
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return ks8695_eth_initialize();
-}
-
-int board_init (void)
-{
- /* arch number of CM4008 */
- gd->bd->bi_arch_number = 624;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- /* power down all but port 0 on the switch */
- ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
- ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
diff --git a/board/cm4008/config.mk b/board/cm4008/config.mk
deleted file mode 100644
index 0d5923b..0000000
--- a/board/cm4008/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c
deleted file mode 100644
index 8315a57..0000000
--- a/board/cm4008/flash.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <asm/sections.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, unsigned char data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- case 1:
- /* ignore for now */
- flash_info[i].flash_id = FLASH_UNKNOWN;
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
- &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return;
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
-{
- volatile unsigned char value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = 0xAA;
- addr[0x2AAA] = 0x55;
- addr[0x5555] = 0x90;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (unsigned char)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = 0xFF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[2]; /* device ID */
-
- switch (value) {
-
- case (unsigned char)INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case (unsigned char)INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = 0xFF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int prot, sect;
- ulong type;
- int rcode = 0;
- ulong start;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot)
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- else
- printf ("\n");
-
- /* Disable interrupts which might cause a timeout here */
- disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- volatile unsigned char *addr;
- unsigned char status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- addr = (volatile unsigned char *) (info->start[sect]);
- *addr = 0x50; /* clear status register */
- *addr = 0x20; /* erase setup */
- *addr = 0xD0; /* erase confirm */
-
- while (((status = *addr) & 0x80) != 0x80) {
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = 0xB0; /* suspend erase */
- *addr = 0xFF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = 0x50; /* clear status register cmd */
- *addr = 0xFF; /* resest to read mode */
-
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- unsigned char data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return 4;
-
- wp = addr;
- port_width = 1;
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, unsigned char data)
-{
- volatile unsigned char *addr = (volatile unsigned char *) dest;
- ulong status;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr,
- (ulong) * addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- disable_interrupts();
-
- *addr = 0x40; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while (((status = *addr) & 0x80) != 0x80) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = 0xFF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = 0xFF; /* restore read mode */
-
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/cm41xx/Kconfig b/board/cm41xx/Kconfig
deleted file mode 100644
index 99e675b..0000000
--- a/board/cm41xx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CM41XX
-
-config SYS_BOARD
- default "cm41xx"
-
-config SYS_SOC
- default "ks8695"
-
-config SYS_CONFIG_NAME
- default "cm41xx"
-
-endif
diff --git a/board/cm41xx/MAINTAINERS b/board/cm41xx/MAINTAINERS
deleted file mode 100644
index f10eeb5..0000000
--- a/board/cm41xx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM41XX BOARD
-#M: -
-S: Maintained
-F: board/cm41xx/
-F: include/configs/cm41xx.h
-F: configs/cm41xx_defconfig
diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile
deleted file mode 100644
index b71ea05..0000000
--- a/board/cm41xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := cm41xx.o flash.o
diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c
deleted file mode 100644
index eabad48..0000000
--- a/board/cm41xx/cm41xx.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
-#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int env_flash_cmdline (void)
-{
- char *sp = (char *) 0x0201c020;
- char *ep;
- int len;
-
- /* Check if "erase" push button is depressed */
- if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
- printf("### Entering network recovery mode...\n");
- setenv("bootargs", "console=ttyAM0,115200 mem=32M initrd=0x400000,8M root=/dev/ram0");
- setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
- setenv("bootdelay", "2");
- return 0;
- }
-
- /* Check for flash based kernel boot args to use as default */
- for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
- ;
-
- if ((len > 0) && (len <1024))
- setenv("bootargs", sp);
-
- return 0;
-}
-
-int board_late_init (void)
-{
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return ks8695_eth_initialize();
-}
-
-int board_init (void)
-{
- /* arch number of CM41xx */
- gd->bd->bi_arch_number = 672;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- /* power down all but port 0 on the switch */
- ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
- ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
diff --git a/board/cm41xx/config.mk b/board/cm41xx/config.mk
deleted file mode 100644
index 0d5923b..0000000
--- a/board/cm41xx/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c
deleted file mode 100644
index 8315a57..0000000
--- a/board/cm41xx/flash.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <asm/sections.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, unsigned char data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- case 1:
- /* ignore for now */
- flash_info[i].flash_id = FLASH_UNKNOWN;
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
- &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return;
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
-{
- volatile unsigned char value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = 0xAA;
- addr[0x2AAA] = 0x55;
- addr[0x5555] = 0x90;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (unsigned char)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = 0xFF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[2]; /* device ID */
-
- switch (value) {
-
- case (unsigned char)INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case (unsigned char)INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = 0xFF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int prot, sect;
- ulong type;
- int rcode = 0;
- ulong start;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot)
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- else
- printf ("\n");
-
- /* Disable interrupts which might cause a timeout here */
- disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- volatile unsigned char *addr;
- unsigned char status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- addr = (volatile unsigned char *) (info->start[sect]);
- *addr = 0x50; /* clear status register */
- *addr = 0x20; /* erase setup */
- *addr = 0xD0; /* erase confirm */
-
- while (((status = *addr) & 0x80) != 0x80) {
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = 0xB0; /* suspend erase */
- *addr = 0xFF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = 0x50; /* clear status register cmd */
- *addr = 0xFF; /* resest to read mode */
-
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- unsigned char data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return 4;
-
- wp = addr;
- port_width = 1;
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, unsigned char data)
-{
- volatile unsigned char *addr = (volatile unsigned char *) dest;
- ulong status;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr,
- (ulong) * addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- disable_interrupts();
-
- *addr = 0x40; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while (((status = *addr) & 0x80) != 0x80) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = 0xFF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = 0xFF; /* restore read mode */
-
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig
index 683efde..3a8f304 100644
--- a/board/compulab/cm_t335/Kconfig
+++ b/board/compulab/cm_t335/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "cm_t335"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig
index 1a841ce..1108e4b 100644
--- a/board/davinci/da8xxevm/Kconfig
+++ b/board/davinci/da8xxevm/Kconfig
@@ -23,16 +23,3 @@ config SYS_CONFIG_NAME
default "da850evm"
endif
-
-if TARGET_HAWKBOARD
-
-config SYS_BOARD
- default "da8xxevm"
-
-config SYS_VENDOR
- default "davinci"
-
-config SYS_CONFIG_NAME
- default "hawkboard"
-
-endif
diff --git a/board/davinci/da8xxevm/MAINTAINERS b/board/davinci/da8xxevm/MAINTAINERS
index dd66f07..10c4e2f 100644
--- a/board/davinci/da8xxevm/MAINTAINERS
+++ b/board/davinci/da8xxevm/MAINTAINERS
@@ -12,11 +12,3 @@ F: include/configs/da850evm.h
F: configs/da850_am18xxevm_defconfig
F: configs/da850evm_defconfig
F: configs/da850evm_direct_nor_defconfig
-
-HAWKBOARD BOARD
-M: Syed Mohammed Khasim <sm.khasim@gmail.com>
-M: Sughosh Ganu <urwithsughosh@gmail.com>
-S: Maintained
-F: include/configs/hawkboard.h
-F: configs/hawkboard_defconfig
-F: configs/hawkboard_uart_defconfig
diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile
index d3acacc..4da509b 100644
--- a/board/davinci/da8xxevm/Makefile
+++ b/board/davinci/da8xxevm/Makefile
@@ -9,4 +9,3 @@
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += da850evm.o
-obj-$(CONFIG_MACH_DAVINCI_HAWK) += hawkboard.o
diff --git a/board/davinci/da8xxevm/README.hawkboard b/board/davinci/da8xxevm/README.hawkboard
deleted file mode 100644
index d6ae02e..0000000
--- a/board/davinci/da8xxevm/README.hawkboard
+++ /dev/null
@@ -1,92 +0,0 @@
-Summary
-=======
-The README is for the boot procedure used for TI's OMAP-L138 based
-hawkboard. The hawkboard comes with a 128MiB Nand flash and a 128MiB
-DDR SDRAM along with a host of other controllers.
-
-The hawkboard is booted in three stages. The initial bootloader which
-executes upon reset is the Rom Boot Loader(RBL) which sits in the
-internal ROM of the omap. The RBL initialises the memory and the nand
-controller, and copies the image stored at a predefined location(block
-1) of the nand flash. The image loaded by the RBL to the memory is the
-AIS signed spl image. This, in turns copies the u-boot binary from the
-nand flash to the memory and jumps to the u-boot entry point.
-
-AIS is an image format defined by TI for the images that are to be
-loaded to memory by the RBL. The image is divided into a series of
-sections and the image's entry point is specified. Each section comes
-with meta data like the target address the section is to be copied to
-and the size of the section, which is used by the RBL to load the
-image. At the end of the image the RBL jumps to the image entry
-point.
-
-The secondary stage bootloader(spl) which is loaded by the RBL then
-loads the u-boot from a predefined location in the nand to the memory
-and jumps to the u-boot entry point.
-
-The reason a secondary stage bootloader is used is because the ECC
-layout expected by the RBL is not the same as that used by
-u-boot/linux. This also implies that for flashing the spl image,we
-need to use the u-boot which uses the ECC layout expected by the
-RBL[1]. Booting u-boot over UART(UART boot) is explained here[2].
-
-
-Compilation
-===========
-Three images might be needed
-
-* spl - This is the secondary bootloader which boots the u-boot
- binary.
-
-* u-boot binary - This is the image flashed to the nand and copied to
- the memory by the spl.
-
- Both the images get compiled with hawkboard_config, with the TOPDIR
- containing the u-boot images, and the spl image under the spl
- directory.
-
- The spl image needs to be processed with the AISGen tool for
- generating the AIS signed image to be flashed. Steps for generating
- the AIS image are explained here[3].
-
-* u-boot for uart boot - This is same as the u-boot binary generated
- above, with the sole difference of the CONFIG_SYS_TEXT_BASE being
- 0xc1080000, as expected by the RBL.
-
- hawkboard_uart_config
-
-
-Flashing the images to Nand
-===========================
-The spl AIS image needs to be flashed to the block 1 of the Nand
-flash, as that is the location the RBL expects the image[4]. For
-flashing the spl, boot over the u-boot specified in [1], and flash the
-image
-
-=> tftpboot 0xc0700000 <nand_spl_ais.bin>
-=> nand erase 0x20000 0x20000
-=> nand write.e 0xc0700000 0x20000 <nand_spl_size>
-
-The u-boot binary is flashed at location 0xe0000(block 6) of the nand
-flash. The spl loader expects the u-boot at this location. For
-flashing the u-boot binary
-
-=> tftpboot 0xc0700000 u-boot.bin
-=> nand erase 0xe0000 0x40000
-=> nand write.e 0xc0700000 0xe0000 <u-boot-size>
-
-
-Links
-=====
-
-[1]
- http://code.google.com/p/hawkboard/downloads/detail?name=u-boot_uart_ais_v1.bin
-
-[2]
- http://elinux.org/Hawkboard#Booting_u-boot_over_UART
-
-[3]
- http://elinux.org/Hawkboard#Signing_u-boot_for_UART_boot
-
-[4]
- http://processors.wiki.ti.com/index.php/RBL_UBL_and_host_program#RBL_booting_from_NAND_and_ECC.2FBad_blocks
diff --git a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg b/board/davinci/da8xxevm/hawkboard-ais-nand.cfg
deleted file mode 100644
index 2b12b6c..0000000
--- a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-# PLL0CFG0 PLL0CFG1
-PLL0 0x00180001 0x00000205
-# PLL1CFG0 PLL1CFG1 DRPYC1R SDCR SDTIMR1 SDTIMR2 SDRCR CLK2XSRC
-DDR2 0x15010001 0x00000002 0x00000043 0x00134632 0x26492a09 0x7d13c722 0x00000249 0x00000000
diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c
deleted file mode 100644
index d5992a5..0000000
--- a/board/davinci/da8xxevm/hawkboard.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Modified for Hawkboard - Syed Mohammed Khasim <khasim@beagleboard.org>
- *
- * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. <nsekhar@ti.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier: GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/arch/da8xx-usb.h>
-#include <ns16550.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct pinmux_resource pinmuxes[] = {
- PINMUX_ITEM(emac_pins_mii),
- PINMUX_ITEM(emac_pins_mdio),
- PINMUX_ITEM(emifa_pins_cs3),
- PINMUX_ITEM(emifa_pins_cs4),
- PINMUX_ITEM(emifa_pins_nand),
- PINMUX_ITEM(uart2_pins_txrx),
- PINMUX_ITEM(uart2_pins_rtscts),
-};
-
-const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
-
-const struct lpsc_resource lpsc[] = {
- { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
- { DAVINCI_LPSC_SPI1 }, /* Serial Flash */
- { DAVINCI_LPSC_EMAC }, /* image download */
- { DAVINCI_LPSC_UART2 }, /* console */
- { DAVINCI_LPSC_GPIO },
-};
-
-const int lpsc_size = ARRAY_SIZE(lpsc);
-
-int board_init(void)
-{
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_HAWKBOARD;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- /*
- * Kick Registers need to be set to allow access to Pin Mux registers
- */
- writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
- writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
-
- /* set cfgchip3 to select mii */
- writel(readl(&davinci_syscfg_regs->cfgchip3) &
- ~(1 << 8), &davinci_syscfg_regs->cfgchip3);
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- char buf[32];
-
- printf("ARM Clock : %s MHz\n",
- strmhz(buf, clk_get(DAVINCI_ARM_CLKID)));
-
- return 0;
-}
-
-int usb_phy_on(void)
-{
- u32 timeout;
- u32 cfgchip2;
-
- cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
-
- cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
- CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ |
- CFGCHIP2_USB1PHYCLKMUX);
- cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
- CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX |
- CFGCHIP2_USB1SUSPENDM;
-
- writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-
- /* wait until the usb phy pll locks */
- timeout = DA8XX_USB_OTG_TIMEOUT;
- while (timeout--)
- if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
- return 1;
-
- /* USB phy was not turned on */
- return 0;
-}
-
-void usb_phy_off(void)
-{
- u32 cfgchip2;
-
- /*
- * Power down the on-chip PHY.
- */
- cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
- cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM);
- cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET;
- writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-}
diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
deleted file mode 100644
index 5c629db..0000000
--- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0xc1080000;
-
- . = ALIGN(4);
- .text :
- {
- *(.vectors)
- arch/arm/cpu/arm926ejs/start.o (.text*)
- arch/arm/cpu/arm926ejs/built-in.o (.text*)
- drivers/mtd/nand/built-in.o (.text*)
-
- *(.text*)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata*) }
-
- . = ALIGN(4);
- .data : {
- *(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
- }
-
- . = ALIGN(4);
- __image_copy_end = .;
- __rel_dyn_start = .;
- __rel_dyn_end = .;
-
- __got_start = .;
- . = ALIGN(4);
- .got : { *(.got) }
-
- __got_end = .;
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.bss*)
- . = ALIGN(4);
- __bss_end = .;
- }
-
- .end :
- {
- *(.__end)
- }
-}
diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
index a74547b..f9ac330 100644
--- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
+++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
@@ -17,14 +17,14 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -52,6 +52,9 @@ int board_early_init_f(void)
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart3(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
@@ -63,24 +66,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/egnite/ethernut5/Kconfig b/board/egnite/ethernut5/Kconfig
index c42c734..5a6c1c5 100644
--- a/board/egnite/ethernut5/Kconfig
+++ b/board/egnite/ethernut5/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "egnite"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "ethernut5"
diff --git a/board/esd/meesc/Kconfig b/board/esd/meesc/Kconfig
index 5041041..150348a 100644
--- a/board/esd/meesc/Kconfig
+++ b/board/esd/meesc/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "esd"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "meesc"
diff --git a/board/esd/otc570/Kconfig b/board/esd/otc570/Kconfig
index 55a2f70..4966f5f 100644
--- a/board/esd/otc570/Kconfig
+++ b/board/esd/otc570/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "esd"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "otc570"
diff --git a/board/eukrea/cpu9260/Kconfig b/board/eukrea/cpu9260/Kconfig
index 9bd077b..90d2124 100644
--- a/board/eukrea/cpu9260/Kconfig
+++ b/board/eukrea/cpu9260/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "eukrea"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "cpu9260"
diff --git a/board/eukrea/cpuat91/Kconfig b/board/eukrea/cpuat91/Kconfig
index b69e4c3..27b005c 100644
--- a/board/eukrea/cpuat91/Kconfig
+++ b/board/eukrea/cpuat91/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "eukrea"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "cpuat91"
diff --git a/board/faraday/a320evb/Kconfig b/board/faraday/a320evb/Kconfig
deleted file mode 100644
index 02c42cb..0000000
--- a/board/faraday/a320evb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_A320EVB
-
-config SYS_BOARD
- default "a320evb"
-
-config SYS_VENDOR
- default "faraday"
-
-config SYS_SOC
- default "a320"
-
-config SYS_CONFIG_NAME
- default "a320evb"
-
-endif
diff --git a/board/faraday/a320evb/MAINTAINERS b/board/faraday/a320evb/MAINTAINERS
deleted file mode 100644
index f13b015..0000000
--- a/board/faraday/a320evb/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-A320EVB BOARD
-M: Po-Yu Chuang <ratbert@faraday-tech.com>
-S: Maintained
-F: board/faraday/a320evb/
-F: include/configs/a320evb.h
-F: configs/a320evb_defconfig
diff --git a/board/faraday/a320evb/Makefile b/board/faraday/a320evb/Makefile
deleted file mode 100644
index 518ce3f..0000000
--- a/board/faraday/a320evb/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := a320evb.o
-obj-y += lowlevel_init.o
diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c
deleted file mode 100644
index c42635b..0000000
--- a/board/faraday/a320evb/a320evb.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftsmc020.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- ftsmc020_init(); /* initialize Flash */
- return 0;
-}
-
-int dram_init(void)
-{
- unsigned long sdram_base = PHYS_SDRAM_1;
- unsigned long expected_size = PHYS_SDRAM_1_SIZE;
- unsigned long actual_size;
-
- actual_size = get_ram_size((void *)sdram_base, expected_size);
-
- gd->ram_size = actual_size;
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ftmac100_initialize(bd);
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- if (banknum == 0) { /* non-CFI boot flash */
- info->portwidth = FLASH_CFI_8BIT;
- info->chipwidth = FLASH_CFI_BY8;
- info->interface = FLASH_CFI_X8;
- return 1;
- } else
- return 0;
-}
diff --git a/board/faraday/a320evb/lowlevel_init.S b/board/faraday/a320evb/lowlevel_init.S
deleted file mode 100644
index d366260..0000000
--- a/board/faraday/a320evb/lowlevel_init.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#include <asm/macro.h>
-#include <faraday/ftsdmc020.h>
-
-/*
- * parameters for the SDRAM controller
- */
-#define TP0_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP0)
-#define TP1_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP1)
-#define CR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_CR)
-#define B0_BSR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_BANK0_BSR)
-#define ACR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_ACR)
-
-#define TP0_D CONFIG_SYS_FTSDMC020_TP0
-#define TP1_D CONFIG_SYS_FTSDMC020_TP1
-#define CR_D1 FTSDMC020_CR_IPREC
-#define CR_D2 FTSDMC020_CR_ISMR
-#define CR_D3 FTSDMC020_CR_IREF
-
-#define B0_BSR_D (CONFIG_SYS_FTSDMC020_BANK0_BSR | \
- FTSDMC020_BANK_BASE(PHYS_SDRAM_1))
-#define ACR_D FTSDMC020_ACR_TOC(0x18)
-
-/*
- * numeric 7 segment display
- */
-.macro led, num
- write32 CONFIG_DEBUG_LED, \num
-.endm
-
-/*
- * Waiting for SDRAM to set up
- */
-.macro wait_sdram
- ldr r0, =CONFIG_FTSDMC020_BASE
-1:
- ldr r1, [r0, #FTSDMC020_OFFSET_CR]
- cmp r1, #0
- bne 1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
- mov r11, lr
-
- led 0x0
-
- bl init_sdmc
-
- led 0x1
-
- /* everything is fine now */
- mov lr, r11
- mov pc, lr
-
-/*
- * memory initialization
- */
-init_sdmc:
- led 0x10
-
- /* set SDRAM register */
-
- write32 TP0_A, TP0_D
- led 0x11
-
- write32 TP1_A, TP1_D
- led 0x12
-
- /* set to precharge */
- write32 CR_A, CR_D1
- led 0x13
-
- wait_sdram
- led 0x14
-
- /* set mode register */
- write32 CR_A, CR_D2
- led 0x15
-
- wait_sdram
- led 0x16
-
- /* set to refresh */
- write32 CR_A, CR_D3
- led 0x17
-
- wait_sdram
- led 0x18
-
- write32 B0_BSR_A, B0_BSR_D
- led 0x19
-
- write32 ACR_A, ACR_D
- led 0x1a
-
- mov pc, lr
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
index 6154c9c..f434269 100644
--- a/board/freescale/common/ls102xa_stream_id.c
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -16,3 +16,18 @@ void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
for (i = 0; i < num; i++)
out_be32(scfg + id[i].offset, id[i].stream_id);
}
+
+void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
+{
+ int i;
+ u32 liodn;
+
+ for (i = 0; i < size; i++) {
+ if (tbl[i].num_ids == 2)
+ liodn = (tbl[i].id[0] << 16) | tbl[i].id[1];
+ else
+ liodn = tbl[i].id[0];
+
+ out_le32((uint32_t *)(tbl[i].reg_offset), liodn);
+ }
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 20eade4..722b88f 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -509,6 +509,25 @@ static struct csu_ns_dev ns_dev[] = {
};
#endif
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
+};
+
struct smmu_stream_id dev_stream_id[] = {
{ 0x100, 0x01, "ETSEC MAC1" },
{ 0x104, 0x02, "ETSEC MAC2" },
@@ -541,6 +560,8 @@ int board_init(void)
config_serdes_mux();
#endif
+ ls1021x_config_caam_stream_id(sec_liodn_tbl,
+ ARRAY_SIZE(sec_liodn_tbl));
ls102xa_config_smmu_stream_id(dev_stream_id,
ARRAY_SIZE(dev_stream_id));
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index bc8b006..fb8525f 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -401,6 +401,25 @@ static struct csu_ns_dev ns_dev[] = {
};
#endif
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
+};
+
struct smmu_stream_id dev_stream_id[] = {
{ 0x100, 0x01, "ETSEC MAC1" },
{ 0x104, 0x02, "ETSEC MAC2" },
@@ -427,6 +446,8 @@ int board_init(void)
#endif
#endif
+ ls1021x_config_caam_stream_id(sec_liodn_tbl,
+ ARRAY_SIZE(sec_liodn_tbl));
ls102xa_config_smmu_stream_id(dev_stream_id,
ARRAY_SIZE(dev_stream_id));
diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c
index b4a3fc9..4884fa2 100644
--- a/board/freescale/ls2085a/ddr.c
+++ b/board/freescale/ls2085a/ddr.c
@@ -77,6 +77,7 @@ found:
popts->data_bus_width = 1;
popts->otf_burst_chop_en = 0;
popts->burst_length = DDR_BL8;
+ popts->bstopre = 0; /* enable auto precharge */
}
/*
* Factors to consider for half-strength driver enable:
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c
index 163a4c4..519d61c 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -12,7 +12,7 @@
#include <asm/io.h>
#include <fdt_support.h>
#include <libfdt.h>
-#include <fsl_mc.h>
+#include <fsl-mc/fsl_mc.h>
#include <environment.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -59,8 +59,15 @@ int timer_init(void)
u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
- out_le32(cltbenr, 0x1); /* enable cluster0 timebase */
- out_le32(cntcr, 0x1); /* enable clock for timer */
+ /* Enable timebase for all clusters.
+ * It is safe to do so even some clusters are not enabled.
+ */
+ out_le32(cltbenr, 0xf);
+
+ /* Enable clock for timer
+ * This is a global setting.
+ */
+ out_le32(cntcr, 0x1);
return 0;
}
@@ -91,7 +98,21 @@ void fdt_fixup_board_enet(void *fdt)
{
int offset;
- offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+ offset = fdt_path_offset(fdt, "/fsl-mc");
+
+ /*
+ * TODO: Remove this when backward compatibility
+ * with old DT node (fsl,dprc@0) is no longer needed.
+ */
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+
+ if (offset < 0) {
+ printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+ __func__, offset);
+ return;
+ }
+
if (get_mc_boot_status() == 0)
fdt_status_okay(fdt, offset);
else
diff --git a/board/gumstix/pepper/Kconfig b/board/gumstix/pepper/Kconfig
index 6f94612..750db85 100644
--- a/board/gumstix/pepper/Kconfig
+++ b/board/gumstix/pepper/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pepper"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/in-circuit/grasshopper/grasshopper.c b/board/in-circuit/grasshopper/grasshopper.c
index 340b713..91b4116 100644
--- a/board/in-circuit/grasshopper/grasshopper.c
+++ b/board/in-circuit/grasshopper/grasshopper.c
@@ -18,14 +18,14 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -53,6 +53,8 @@ int board_early_init_f(void)
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(SDRAM_DATA_32BIT, 23, 0, PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart0(PORTMUX_DRIVE_MIN);
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
@@ -69,24 +71,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x00;
diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig
index e989e4b..9a8421e 100644
--- a/board/isee/igep0033/Kconfig
+++ b/board/isee/igep0033/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "am335x_igep0033"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index e075f46..dcfefc4 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -126,7 +126,8 @@ struct bfticu_iomap {
#endif
int ethernet_present(void);
-int ivm_read_eeprom(void);
+int ivm_read_eeprom(unsigned char *buf, int len);
+int ivm_analyze_eeprom(unsigned char *buf, int len);
int trigger_fpga_config(void);
int wait_for_fpga_config(void);
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index b6b19cc..42db542 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -10,6 +10,8 @@
#include <i2c.h>
#include "common.h"
+#define MAC_STR_SZ 20
+
static int ivm_calc_crc(unsigned char *buf, int len)
{
const unsigned short crc_tab[16] = {
@@ -185,45 +187,37 @@ static int ivm_check_crc(unsigned char *buf, int block)
return 0;
}
-static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf,
+/* take care of the possible MAC address offset and the IVM content offset */
+static int process_mac(unsigned char *valbuf, unsigned char *buf,
int offset)
{
+ unsigned char mac[6];
unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
- if (offset == 0)
- return 0;
+ /* use an intermediate buffer, to not change IVM content
+ * MAC address is at offset 1
+ */
+ memcpy(mac, buf+1, 6);
- val += offset;
- buf[4] = (val >> 16) & 0xff;
- buf[5] = (val >> 8) & 0xff;
- buf[6] = val & 0xff;
- sprintf((char *)valbuf, "%pM", buf + 1);
+ if (offset) {
+ val += offset;
+ mac[3] = (val >> 16) & 0xff;
+ mac[4] = (val >> 8) & 0xff;
+ mac[5] = val & 0xff;
+ }
+
+ sprintf((char *)valbuf, "%pM", mac);
return 0;
}
static int ivm_analyze_block2(unsigned char *buf, int len)
{
- unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
+ unsigned char valbuf[MAC_STR_SZ];
unsigned long count;
/* IVM_MAC Adress begins at offset 1 */
sprintf((char *)valbuf, "%pM", buf + 1);
ivm_set_value("IVM_MacAddress", (char *)valbuf);
- /* if an offset is defined, add it */
- calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
-#ifdef MACH_TYPE_KM_KIRKWOOD
- setenv((char *)"ethaddr", (char *)valbuf);
-#else
- if (getenv("ethaddr") == NULL)
- setenv((char *)"ethaddr", (char *)valbuf);
-#endif
-#ifdef CONFIG_KMVECT1
-/* KMVECT1 has two ethernet interfaces */
- if (getenv("eth1addr") == NULL) {
- calculate_mac_offset(buf, valbuf, 1);
- setenv((char *)"eth1addr", (char *)valbuf);
- }
-#endif
/* IVM_MacCount */
count = (buf[10] << 24) +
(buf[11] << 16) +
@@ -236,7 +230,7 @@ static int ivm_analyze_block2(unsigned char *buf, int len)
return 0;
}
-static int ivm_analyze_eeprom(unsigned char *buf, int len)
+int ivm_analyze_eeprom(unsigned char *buf, int len)
{
unsigned short val;
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
@@ -296,21 +290,44 @@ static int ivm_analyze_eeprom(unsigned char *buf, int len)
return 0;
}
-int ivm_read_eeprom(void)
+static int ivm_populate_env(unsigned char *buf, int len)
+{
+ unsigned char *page2;
+ unsigned char valbuf[MAC_STR_SZ];
+
+ /* do we have the page 2 filled ? if not return */
+ if (ivm_check_crc(buf, 2))
+ return 0;
+ page2 = &buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN*2];
+
+ /* if an offset is defined, add it */
+ process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
+ if (getenv("ethaddr") == NULL)
+ setenv((char *)"ethaddr", (char *)valbuf);
+#ifdef CONFIG_KMVECT1
+/* KMVECT1 has two ethernet interfaces */
+ if (getenv("eth1addr") == NULL) {
+ process_mac(valbuf, page2, 1);
+ setenv((char *)"eth1addr", (char *)valbuf);
+ }
+#endif
+
+ return 0;
+}
+
+int ivm_read_eeprom(unsigned char *buf, int len)
{
- uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
int ret;
i2c_set_bus_num(CONFIG_KM_IVM_BUS);
/* add deblocking here */
i2c_make_abort();
- ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, i2c_buffer,
- CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+ ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, buf, len);
if (ret != 0) {
printf("Error reading EEprom\n");
return -2;
}
- return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+ return ivm_populate_env(buf, len);
}
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index bf84676..c599b40 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -18,6 +18,8 @@
#include <i2c.h>
#include "../common/common.h"
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
/*
* I/O Port configuration table
*
@@ -393,9 +395,15 @@ int board_early_init_r(void)
return 0;
}
+int misc_init_r(void)
+{
+ ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+ return 0;
+}
+
int hush_init_var(void)
{
- ivm_read_eeprom();
+ ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index 1da0dcb..89e9e1e 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -28,6 +28,8 @@
#include "../common/common.h"
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* port pin dir open_drain assign */
#if defined(CONFIG_MPC8360)
@@ -190,6 +192,7 @@ int board_early_init_r(void)
int misc_init_r(void)
{
+ ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
@@ -370,7 +373,7 @@ int ft_board_setup(void *blob, bd_t *bd)
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var(void)
{
- ivm_read_eeprom();
+ ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
#endif
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 1c7c108..2938861 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -102,6 +102,8 @@ static const u32 kwmpp_config[] = {
0
};
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
#if defined(CONFIG_KM_MGCOGE3UN)
/*
* Wait for startup OK from mgcoge3ne
@@ -210,6 +212,8 @@ int misc_init_r(void)
}
#endif
+ ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+
initialize_unit_leds();
set_km_env();
set_bootcount_addr();
@@ -419,7 +423,7 @@ void reset_phy(void)
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var(void)
{
- ivm_read_eeprom();
+ ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
#endif
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index a74f75b..eebb47f 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -26,6 +26,8 @@
DECLARE_GLOBAL_DATA_PTR;
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
int checkboard(void)
{
printf("Board: Keymile %s\n", CONFIG_KM_BOARD_NAME);
@@ -195,13 +197,14 @@ int misc_init_r(void)
}
}
+ ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var(void)
{
- ivm_read_eeprom();
+ ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
#endif
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 2ad53ec..f078295 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -20,19 +20,19 @@
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = EBI_SRAM_CS2_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SRAM_CS2_SIZE >> PAGE_SHIFT,
- .phys = (EBI_SRAM_CS2_BASE >> PAGE_SHIFT)
+ .virt_pgno = EBI_SRAM_CS2_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SRAM_CS2_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (EBI_SRAM_CS2_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -91,6 +91,8 @@ int board_early_init_f(void)
/* Enable 26 address bits and NCS2 */
portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
/* de-assert "force sys reset" pin */
@@ -151,24 +153,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
index d82fee7..a0c7d3b 100644
--- a/board/miromico/hammerhead/hammerhead.c
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -21,14 +21,14 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
{
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_NONE,
}, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
| MMU_VMR_CACHE_WRBACK,
},
};
@@ -63,6 +63,8 @@ int board_early_init_f(void)
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
@@ -74,24 +76,6 @@ int board_early_init_f(void)
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S
index e252909..9d4ea1b 100644
--- a/board/nokia/rx51/lowlevel_init.S
+++ b/board/nokia/rx51/lowlevel_init.S
@@ -37,7 +37,8 @@ ih_magic: /* IH_MAGIC in big endian from include/image.h */
.global save_boot_params
save_boot_params:
-
+ /* Get return address */
+ ldr lr, =save_boot_params_ret
/* Copy valid attached kernel to address KERNEL_ADDRESS */
diff --git a/board/phytec/pcm051/Kconfig b/board/phytec/pcm051/Kconfig
index 2cc0d88..bb98715 100644
--- a/board/phytec/pcm051/Kconfig
+++ b/board/phytec/pcm051/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pcm051"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/raspberrypi/rpi/Makefile b/board/raspberrypi/rpi/Makefile
index c53c92b..4ce2c98 100644
--- a/board/raspberrypi/rpi/Makefile
+++ b/board/raspberrypi/rpi/Makefile
@@ -1,15 +1,7 @@
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# (C) Copyright 2012 Stephen Warren
#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# SPDX-License-Identifier: GPL-2.0
#
obj-y := rpi.o
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 948078b..50a699b 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -1,17 +1,7 @@
/*
- * (C) Copyright 2012-2013 Stephen Warren
+ * (C) Copyright 2012-2013,2015 Stephen Warren
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
@@ -39,7 +29,11 @@ U_BOOT_DEVICE(bcm2835_gpios) = {
};
static const struct pl01x_serial_platdata serial_platdata = {
+#ifdef CONFIG_BCM2836
+ .base = 0x3f201000,
+#else
.base = 0x20201000,
+#endif
.type = TYPE_PL011,
.clock = 3000000,
};
@@ -87,9 +81,20 @@ static const struct {
} models[] = {
[0] = {
"Unknown model",
+#ifdef CONFIG_BCM2836
+ "bcm2836-rpi-other.dtb",
+#else
"bcm2835-rpi-other.dtb",
+#endif
false,
},
+#ifdef CONFIG_BCM2836
+ [BCM2836_BOARD_REV_2_B] = {
+ "2 Model B",
+ "bcm2836-rpi-2-b.dtb",
+ true,
+ },
+#else
[BCM2835_BOARD_REV_B_I2C0_2] = {
"Model B (no P5)",
"bcm2835-rpi-b-i2c0.dtb",
@@ -160,6 +165,7 @@ static const struct {
"bcm2835-rpi-a-plus.dtb",
false,
},
+#endif
};
u32 rpi_board_rev = 0;
@@ -267,7 +273,15 @@ static void get_board_rev(void)
return;
}
+ /*
+ * For details of old-vs-new scheme, see:
+ * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
+ * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
+ * (a few posts down)
+ */
rpi_board_rev = msg->get_board_rev.body.resp.rev;
+ if (rpi_board_rev & 0x800000)
+ rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
if (rpi_board_rev >= ARRAY_SIZE(models)) {
printf("RPI: Board rev %u outside known range\n",
rpi_board_rev);
@@ -279,7 +293,7 @@ static void get_board_rev(void)
}
name = models[rpi_board_rev].name;
- printf("RPI model: %s\n", name);
+ printf("RPI %s\n", name);
}
int board_init(void)
diff --git a/board/raspberrypi/rpi_2/Kconfig b/board/raspberrypi/rpi_2/Kconfig
new file mode 100644
index 0000000..032184d
--- /dev/null
+++ b/board/raspberrypi/rpi_2/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_RPI_2
+
+config SYS_BOARD
+ default "rpi_2"
+
+config SYS_VENDOR
+ default "raspberrypi"
+
+config SYS_SOC
+ default "bcm2835"
+
+config SYS_CONFIG_NAME
+ default "rpi_2"
+
+endif
diff --git a/board/raspberrypi/rpi_2/MAINTAINERS b/board/raspberrypi/rpi_2/MAINTAINERS
new file mode 100644
index 0000000..85a480c
--- /dev/null
+++ b/board/raspberrypi/rpi_2/MAINTAINERS
@@ -0,0 +1,6 @@
+RPI_2 BOARD
+M: Stephen Warren <swarren@wwwdotorg.org>
+S: Maintained
+F: board/raspberrypi/rpi_2/
+F: include/configs/rpi_2.h
+F: configs/rpi_2_defconfig
diff --git a/board/raspberrypi/rpi_2/Makefile b/board/raspberrypi/rpi_2/Makefile
new file mode 100644
index 0000000..d82cd21
--- /dev/null
+++ b/board/raspberrypi/rpi_2/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2012,2015 Stephen Warren
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := ../rpi/rpi.o
diff --git a/board/renesas/silk/Kconfig b/board/renesas/silk/Kconfig
new file mode 100644
index 0000000..07aee0e
--- /dev/null
+++ b/board/renesas/silk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_SILK
+
+config SYS_BOARD
+ default "silk"
+
+config SYS_VENDOR
+ default "renesas"
+
+config SYS_CONFIG_NAME
+ default "silk"
+
+endif
diff --git a/board/renesas/silk/MAINTAINERS b/board/renesas/silk/MAINTAINERS
new file mode 100644
index 0000000..b566ccf
--- /dev/null
+++ b/board/renesas/silk/MAINTAINERS
@@ -0,0 +1,6 @@
+SILK BOARD
+M: Cogent Embedded, Inc. <source@cogentembedded.com>
+S: Maintained
+F: board/renesas/silk/
+F: include/configs/silk.h
+F: configs/silk_defconfig
diff --git a/board/renesas/silk/Makefile b/board/renesas/silk/Makefile
new file mode 100644
index 0000000..e6eea61
--- /dev/null
+++ b/board/renesas/silk/Makefile
@@ -0,0 +1,10 @@
+#
+# board/renesas/silk/Makefile
+#
+# Copyright (C) 2015 Renesas Electronics Corporation
+# Copyright (C) 2015 Cogent Embedded, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := silk.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/silk/qos.c b/board/renesas/silk/qos.c
new file mode 100644
index 0000000..4f6e46c
--- /dev/null
+++ b/board/renesas/silk/qos.c
@@ -0,0 +1,951 @@
+/*
+ * board/renesas/silk/qos.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+/* QoS version 0.11 */
+
+enum {
+ DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+ DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+ DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+ DBSC3_15,
+ DBSC3_NR,
+};
+
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_R15_BASE,
+};
+
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+ int i;
+ struct rcar_s3c *s3c;
+ struct rcar_s3c_qos *s3c_qos;
+ struct rcar_dbsc3_qos *qos_addr;
+ struct rcar_mxi *mxi;
+ struct rcar_mxi_qos *mxi_qos;
+ struct rcar_axi_qos *axi_qos;
+
+ /* DBSC DBADJ2 */
+ writel(0x20042004, DBSC3_0_DBADJ2);
+
+ /* S3C -QoS */
+ s3c = (struct rcar_s3c *)S3C_BASE;
+ writel(0x1F0D0B0A, &s3c->s3crorr);
+ writel(0x1F0D0B09, &s3c->s3cworr);
+
+ /* QoS Control Registers */
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
+ writel(0x80928092, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20DC, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20DC, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20FA, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20FA, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ /* DBSC -QoS */
+ /* DBSC0 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x0000207D, &qos_addr->dbtmval0);
+ writel(0x00002053, &qos_addr->dbtmval1);
+ writel(0x0000202A, &qos_addr->dbtmval2);
+ writel(0x00001FBD, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002064, &qos_addr->dbthres0);
+ writel(0x0000203E, &qos_addr->dbthres1);
+ writel(0x00002019, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC0 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x0000207D, &qos_addr->dbtmval0);
+ writel(0x00002053, &qos_addr->dbtmval1);
+ writel(0x00002043, &qos_addr->dbtmval2);
+ writel(0x00002030, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002064, &qos_addr->dbthres0);
+ writel(0x0000203E, &qos_addr->dbthres1);
+ writel(0x00002031, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* CCI-400 -QoS */
+ writel(0x20000800, CCI_400_MAXOT_1);
+ writel(0x20000800, CCI_400_MAXOT_2);
+ writel(0x0000000C, CCI_400_QOSCNTL_1);
+ writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+ /* MXI -QoS */
+ /* Transaction Control (MXI) */
+ mxi = (struct rcar_mxi *)MXI_BASE;
+ writel(0x00000013, &mxi->mxrtcr);
+ writel(0x00000013, &mxi->mxwtcr);
+ writel(0x00780080, &mxi->mxsaar0);
+ writel(0x02000800, &mxi->mxsaar1);
+
+ /* QoS Control (MXI) */
+ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
+ writel(0x0000000C, &mxi_qos->vspdu0);
+ writel(0x0000000E, &mxi_qos->du0);
+
+ /* AXI -QoS */
+ /* Transaction Control (MXI) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (RT-AXI) */
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (MP-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000206E, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (SYS-AXI256) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (CCI-AXI) */
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (Media-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+}
+#else /* CONFIG_RMOBILE_EXTRAM_BOOT */
+void qos_init(void)
+{
+}
+#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */
diff --git a/board/renesas/silk/qos.h b/board/renesas/silk/qos.h
new file mode 100644
index 0000000..75a20bb
--- /dev/null
+++ b/board/renesas/silk/qos.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c
new file mode 100644
index 0000000..dfd9a9d
--- /dev/null
+++ b/board/renesas/silk/silk.c
@@ -0,0 +1,163 @@
+/*
+ * board/renesas/silk/silk.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/mmc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <i2c.h>
+#include <div64.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
+void s_init(void)
+{
+ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+
+ /* Watchdog init */
+ writel(0xA5A5A500, &rwdt->rwtcsra);
+ writel(0xA5A5A500, &swdt->swtcsra);
+
+ /* QoS */
+ qos_init();
+}
+
+#define TMU0_MSTP125 (1 << 25)
+#define SCIF2_MSTP719 (1 << 19)
+#define ETHER_MSTP813 (1 << 13)
+#define IIC1_MSTP323 (1 << 23)
+#define MMC0_MSTP315 (1 << 15)
+
+int board_early_init_f(void)
+{
+ /* TMU */
+ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+ /* SCIF2 */
+ mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+
+ /* ETHER */
+ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
+
+ /* IIC1 / sh-i2c ch1 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
+
+#ifdef CONFIG_SH_MMCIF
+ /* MMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
+#endif
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ /* Init PFC controller */
+ r8a7794_pinmux_init();
+
+ /* Ether Enable */
+ gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
+ gpio_request(GPIO_FN_ETH_RX_ER, NULL);
+ gpio_request(GPIO_FN_ETH_RXD0, NULL);
+ gpio_request(GPIO_FN_ETH_RXD1, NULL);
+ gpio_request(GPIO_FN_ETH_LINK, NULL);
+ gpio_request(GPIO_FN_ETH_REFCLK, NULL);
+ gpio_request(GPIO_FN_ETH_MDIO, NULL);
+ gpio_request(GPIO_FN_ETH_TXD1, NULL);
+ gpio_request(GPIO_FN_ETH_TX_EN, NULL);
+ gpio_request(GPIO_FN_ETH_MAGIC, NULL);
+ gpio_request(GPIO_FN_ETH_TXD0, NULL);
+ gpio_request(GPIO_FN_ETH_MDC, NULL);
+ gpio_request(GPIO_FN_IRQ8, NULL);
+
+ /* PHY reset */
+ gpio_request(GPIO_GP_1_24, NULL);
+ gpio_direction_output(GPIO_GP_1_24, 0);
+ mdelay(20);
+ gpio_set_value(GPIO_GP_1_24, 1);
+ udelay(1);
+
+ return 0;
+}
+
+#define CXR24 0xEE7003C0 /* MAC address high register */
+#define CXR25 0xEE7003C8 /* MAC address low register */
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SH_ETHER
+ int ret = -ENODEV;
+ u32 val;
+ unsigned char enetaddr[6];
+
+ ret = sh_eth_initialize(bis);
+ if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+ return ret;
+
+ /* Set Mac address */
+ val = enetaddr[0] << 24 | enetaddr[1] << 16 |
+ enetaddr[2] << 8 | enetaddr[3];
+ writel(val, CXR24);
+
+ val = enetaddr[4] << 8 | enetaddr[5];
+ writel(val, CXR25);
+
+ return ret;
+#else
+ return 0;
+#endif
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SH_MMCIF
+ /* MMC0 */
+ gpio_request(GPIO_GP_4_31, NULL);
+ gpio_set_value(GPIO_GP_4_31, 1);
+
+ ret = mmcif_mmc_init();
+#endif
+ return ret;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+void reset_cpu(ulong addr)
+{
+ u8 val;
+
+ i2c_set_bus_num(1); /* PowerIC connected to ch1 */
+ i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+ val |= 0x02;
+ i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+}
diff --git a/board/ronetix/pm9261/Kconfig b/board/ronetix/pm9261/Kconfig
index a4934c5..8c54198 100644
--- a/board/ronetix/pm9261/Kconfig
+++ b/board/ronetix/pm9261/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "ronetix"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "pm9261"
diff --git a/board/ronetix/pm9263/Kconfig b/board/ronetix/pm9263/Kconfig
index 339a6ea..5b47d34 100644
--- a/board/ronetix/pm9263/Kconfig
+++ b/board/ronetix/pm9263/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "ronetix"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "pm9263"
diff --git a/board/ronetix/pm9g45/Kconfig b/board/ronetix/pm9g45/Kconfig
index 65fc5c4..ad5309f 100644
--- a/board/ronetix/pm9g45/Kconfig
+++ b/board/ronetix/pm9g45/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "ronetix"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "pm9g45"
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 8b4c8e9..da2245f 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -355,3 +355,31 @@ int misc_init_r(void)
return 0;
}
#endif
+
+void reset_misc(void)
+{
+ struct gpio_desc gpio = {};
+ int node;
+
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
+ "samsung,emmc-reset");
+ if (node < 0)
+ return;
+
+ gpio_request_by_name_nodev(gd->fdt_blob, node, "reset-gpio", 0, &gpio,
+ GPIOD_IS_OUT);
+
+ if (dm_gpio_is_valid(&gpio)) {
+ /*
+ * Reset eMMC
+ *
+ * FIXME: Need to optimize delay time. Minimum 1usec pulse is
+ * required by 'JEDEC Standard No.84-A441' (eMMC)
+ * document but real delay time is expected to greater
+ * than 1usec.
+ */
+ dm_gpio_set_value(&gpio, 0);
+ mdelay(10);
+ dm_gpio_set_value(&gpio, 1);
+ }
+}
diff --git a/board/samsung/goni/Kconfig b/board/samsung/goni/Kconfig
index cbbf5a9..006e864 100644
--- a/board/samsung/goni/Kconfig
+++ b/board/samsung/goni/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "s5p_goni"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index e3517f2..bff6ac9 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -248,12 +248,12 @@ static void board_clock_init(void)
* MOUTc2c = 800 Mhz
* MOUTpwi = 108 MHz
*
- * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 400 (1)
+ * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 200 (3)
* sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1)
* aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1)
* sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5)
*/
- set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) |
+ set = G2D_ACP_RATIO(3) | C2C_RATIO(1) | PWI_RATIO(5) |
C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1);
clrsetbits_le32(&clk->div_dmc1, clr, set);
@@ -503,11 +503,3 @@ int board_usb_init(int index, enum usb_init_type init)
return s3c_udc_probe(&s5pc210_otg_data);
}
#endif
-
-void reset_misc(void)
-{
- /* Reset eMMC*/
- gpio_set_value(EXYNOS4X12_GPIO_K12, 0);
- mdelay(10);
- gpio_set_value(EXYNOS4X12_GPIO_K12, 1);
-}
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index a9d62ff..576abae 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -22,6 +22,9 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "peach-pi"
+config DM_CROS_EC
+ default y
+
endif
if TARGET_PEACH_PIT
@@ -35,6 +38,9 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "peach-pit"
+config DM_CROS_EC
+ default y
+
endif
if TARGET_SMDK5420
diff --git a/board/samsung/smdkc100/Kconfig b/board/samsung/smdkc100/Kconfig
index d2157b4..ea87166 100644
--- a/board/samsung/smdkc100/Kconfig
+++ b/board/samsung/smdkc100/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "smdkc100"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/siemens/corvus/Kconfig b/board/siemens/corvus/Kconfig
index 7b505aa..69fe0f0 100644
--- a/board/siemens/corvus/Kconfig
+++ b/board/siemens/corvus/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "siemens"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "corvus"
diff --git a/board/siemens/taurus/Kconfig b/board/siemens/taurus/Kconfig
index c07d244..cf71e4c 100644
--- a/board/siemens/taurus/Kconfig
+++ b/board/siemens/taurus/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "siemens"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "taurus"
diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig
index f2e1098..2e9a2b3 100644
--- a/board/silica/pengwyn/Kconfig
+++ b/board/silica/pengwyn/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pengwyn"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 4a21589..9cf54e5 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -149,6 +149,16 @@ config SPL_FEL
bool "SPL/FEL mode support"
depends on SPL
default n
+ help
+ This enables support for Fast Early Loader (FEL) mode. This
+ allows U-Boot to be loaded to the board over USB by the on-chip
+ boot rom. U-Boot should be sent in two parts: SPL first, with
+ 'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with
+ 'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option
+ shrinks the amount of SRAM available to SPL, so only enable it if
+ you need FEL. Note that enabling this option only allows FEL to be
+ used; it is still possible to boot U-Boot from boot media. U-Boot
+ SPL detects when it is being loaded using FEL.
config UART0_PORT_F
bool "UART0 on MicroSD breakout board"
@@ -213,6 +223,14 @@ config USB0_VBUS_PIN
Set the Vbus enable pin for usb0 (otg). This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+config USB0_VBUS_DET
+ string "Vbus detect pin for usb0 (otg)"
+ depends on USB_MUSB_SUNXI
+ default ""
+ ---help---
+ Set the Vbus detect pin for usb0 (otg). This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config USB1_VBUS_PIN
string "Vbus enable pin for usb1 (ehci0)"
default "PH6" if MACH_SUN4I || MACH_SUN7I
@@ -302,6 +320,14 @@ config VIDEO_LCD_POWER
Set the power enable pin for the LCD panel. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+config VIDEO_LCD_RESET
+ string "LCD panel reset pin"
+ depends on VIDEO
+ default ""
+ ---help---
+ Set the reset pin for the LCD panel. This takes a string in the format
+ understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config VIDEO_LCD_BL_EN
string "LCD panel backlight enable pin"
depends on VIDEO
@@ -326,6 +352,30 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
---help---
Set this if the backlight pwm output is active low.
+config VIDEO_LCD_PANEL_I2C
+ bool "LCD panel needs to be configured via i2c"
+ depends on VIDEO
+ default m
+ ---help---
+ Say y here if the LCD panel needs to be configured via i2c. This
+ will add a bitbang i2c controller using gpios to talk to the LCD.
+
+config VIDEO_LCD_PANEL_I2C_SDA
+ string "LCD panel i2c interface SDA pin"
+ depends on VIDEO_LCD_PANEL_I2C
+ default "PG12"
+ ---help---
+ Set the SDA pin for the LCD i2c interface. This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_PANEL_I2C_SCL
+ string "LCD panel i2c interface SCL pin"
+ depends on VIDEO_LCD_PANEL_I2C
+ default "PG10"
+ ---help---
+ Set the SCL pin for the LCD i2c interface. This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
@@ -364,6 +414,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
---help---
7.85" 1024x768 Hitachi tx18d42vm LCD panel support
+config VIDEO_LCD_TL059WV5C0
+ bool "tl059wv5c0 LCD panel"
+ select VIDEO_LCD_PANEL_I2C
+ select VIDEO_LCD_IF_PARALLEL
+ ---help---
+ 6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and
+ Aigo M60/M608/M606 tablets.
+
endchoice
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index faa413c..9a287d3 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -46,6 +46,11 @@ S: Maintained
F: board/sunxi/dram_a20_olinuxino_l2.c
F: configs/A20-OLinuXino-Lime2_defconfig
+AMPE A76 BOARD
+M: Paul Kocialkowski <contact@paulk.fr>
+S: Maintained
+F: configs/Ampe_A76_defconfig
+
COLOMBUS BOARD
M: Maxime Ripard <maxime.ripard@free-electrons.com>
S: Maintained
@@ -57,9 +62,7 @@ M: Hans de Goede <hdegoede@redhat.com>
S: Maintained
F: include/configs/sun7i.h
F: configs/Cubieboard2_defconfig
-F: configs/Cubieboard2_FEL_defconfig
F: configs/Cubietruck_defconfig
-F: configs/Cubietruck_FEL_defconfig
GEMEI-G9 TABLET
M: Priit Laes <plaes@plaes.org>
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b70e00c..e1891d1 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -33,6 +33,12 @@
#include <linux/usb/musb.h>
#include <net.h>
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
+int soft_i2c_gpio_sda;
+int soft_i2c_gpio_scl;
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
@@ -152,6 +158,10 @@ void i2c_init_board(void)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
clock_twi_onoff(0, 1);
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+ soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
+ soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+#endif
}
#ifdef CONFIG_SPL_BUILD
diff --git a/board/syteco/jadecpu/Kconfig b/board/syteco/jadecpu/Kconfig
deleted file mode 100644
index 6e9392e..0000000
--- a/board/syteco/jadecpu/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_JADECPU
-
-config SYS_BOARD
- default "jadecpu"
-
-config SYS_VENDOR
- default "syteco"
-
-config SYS_SOC
- default "mb86r0x"
-
-config SYS_CONFIG_NAME
- default "jadecpu"
-
-endif
diff --git a/board/syteco/jadecpu/MAINTAINERS b/board/syteco/jadecpu/MAINTAINERS
deleted file mode 100644
index b53e7ca..0000000
--- a/board/syteco/jadecpu/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-JADECPU BOARD
-M: Matthias Weisser <weisserm@arcor.de>
-S: Maintained
-F: board/syteco/jadecpu/
-F: include/configs/jadecpu.h
-F: configs/jadecpu_defconfig
diff --git a/board/syteco/jadecpu/Makefile b/board/syteco/jadecpu/Makefile
deleted file mode 100644
index 7426436..0000000
--- a/board/syteco/jadecpu/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += jadecpu.o
-obj-y += lowlevel_init.o
diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
deleted file mode 100644
index 6c60a41..0000000
--- a/board/syteco/jadecpu/jadecpu.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (c) 2010 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mb86r0x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
- struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
- MB86R0x_CCNT_BASE;
-
- /* We select mode 0 for group 2 and mode 1 for group 4 */
- writel(0x00000010, &ccnt->cmux_md);
-
- gd->flags = 0;
- gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
-
- icache_enable();
- dcache_enable();
-
- return 0;
-}
-
-static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
- unsigned long pwm_base)
-{
- struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
- MB86R0x_GPIO_BASE;
- struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
- const char *e;
-
- writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
-
- e = getenv(pwm_opts);
- if (e != NULL) {
- const char *s;
- uint32_t freq, init;
-
- freq = 0;
- init = 0;
-
- s = strchr(e, 'f');
- if (s != NULL)
- freq = simple_strtol(s + 2, NULL, 0);
-
- s = strchr(e, 'i');
- if (s != NULL)
- init = simple_strtol(s + 2, NULL, 0);
-
- if (freq > 0) {
- writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
- &pwm->bcr);
- writel(1002, &pwm->tpr);
- writel(1, &pwm->pr);
- writel(init * 10 + 1, &pwm->dr);
- writel(1, &pwm->cr);
- writel(1, &pwm->sr);
- }
- }
-}
-
-int board_late_init(void)
-{
- struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
- MB86R0x_GPIO_BASE;
- uint32_t in_word;
-
-#ifdef CONFIG_VIDEO_MB86R0xGDC
- /* Check if we have valid display settings and turn on power if so */
- /* Display 0 */
- if (getenv("gs_dsp_0_param") || getenv("videomode"))
- setup_display_power((1 << 3), "gs_dsp_0_pwm",
- MB86R0x_PWM0_BASE);
-
- /* The corresponding GPIO is always an output */
- writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
-
- /* Display 1 */
- if (getenv("gs_dsp_1_param") || getenv("videomode1"))
- setup_display_power((1 << 4), "gs_dsp_1_pwm",
- MB86R0x_PWM1_BASE);
-
- /* The corresponding GPIO is always an output */
- writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
-#endif /* CONFIG_VIDEO_MB86R0xGDC */
-
- /* 5V enable */
- writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
- writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
-
- /* We have special boot options if told by GPIOs */
- in_word = readl(&gpio->gpdr1);
-
- if ((in_word & 0xC0) == 0xC0) {
- setenv("stdin", "serial");
- setenv("stdout", "serial");
- setenv("stderr", "serial");
- setenv("preboot", "run gs_slow_boot");
- } else if ((in_word & 0xC0) != 0) {
- setenv("stdout", "vga");
- setenv("preboot", "run gs_slow_boot");
- } else {
- setenv("stdin", "serial");
- setenv("stdout", "serial");
- setenv("stderr", "serial");
- if (getenv("gs_devel")) {
- setenv("preboot", "run gs_slow_boot");
- } else {
- setenv("preboot", "run gs_fast_boot");
- }
- }
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- return 0;
-}
-
-/*
- * DRAM configuration
- */
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
- PHYS_SDRAM_SIZE);
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = gd->ram_size;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
diff --git a/board/syteco/jadecpu/lowlevel_init.S b/board/syteco/jadecpu/lowlevel_init.S
deleted file mode 100644
index 9568cec..0000000
--- a/board/syteco/jadecpu/lowlevel_init.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * (C) Copyright 2003, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/macro.h>
-#include <asm/arch/mb86r0x.h>
-#include <generated/asm-offsets.h>
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
-/*
- * Initialize Clock Reset Generator (CRG)
- */
-
- ldr r0, =MB86R0x_CRG_BASE
-
- /* Not change the initial value that is set by external pin.*/
-WAIT_PLL:
- ldr r2, [r0, #CRG_CRPR] /* Wait for PLLREADY */
- tst r2, #MB86R0x_CRG_CRPR_PLLRDY
- beq WAIT_PLL
-
- /* Set clock gate control */
- ldr r1, =CONFIG_SYS_CRG_CRHA_INIT
- str r1, [r0, #CRG_CRHA]
- ldr r1, =CONFIG_SYS_CRG_CRPA_INIT
- str r1, [r0, #CRG_CRPA]
- ldr r1, =CONFIG_SYS_CRG_CRPB_INIT
- str r1, [r0, #CRG_CRPB]
- ldr r1, =CONFIG_SYS_CRG_CRHB_INIT
- str r1, [r0, #CRG_CRHB]
- ldr r1, =CONFIG_SYS_CRG_CRAM_INIT
- str r1, [r0, #CRG_CRAM]
-
-/*
- * Initialize External Bus Interface
- */
- ldr r0, =MB86R0x_MEMC_BASE
-
- ldr r1, =CONFIG_SYS_MEMC_MCFMODE0_INIT
- str r1, [r0, #MEMC_MCFMODE0]
- ldr r1, =CONFIG_SYS_MEMC_MCFMODE2_INIT
- str r1, [r0, #MEMC_MCFMODE2]
- ldr r1, =CONFIG_SYS_MEMC_MCFMODE4_INIT
- str r1, [r0, #MEMC_MCFMODE4]
-
- ldr r1, =CONFIG_SYS_MEMC_MCFTIM0_INIT
- str r1, [r0, #MEMC_MCFTIM0]
- ldr r1, =CONFIG_SYS_MEMC_MCFTIM2_INIT
- str r1, [r0, #MEMC_MCFTIM2]
- ldr r1, =CONFIG_SYS_MEMC_MCFTIM4_INIT
- str r1, [r0, #MEMC_MCFTIM4]
-
- ldr r1, =CONFIG_SYS_MEMC_MCFAREA0_INIT
- str r1, [r0, #MEMC_MCFAREA0]
- ldr r1, =CONFIG_SYS_MEMC_MCFAREA2_INIT
- str r1, [r0, #MEMC_MCFAREA2]
- ldr r1, =CONFIG_SYS_MEMC_MCFAREA4_INIT
- str r1, [r0, #MEMC_MCFAREA4]
-
-/*
- * Initialize DDR2 Controller
- */
-
- /* Wait for PLL LOCK up time or more */
- wait_timer 20
-
- /*
- * (2) Initialize DDRIF
- */
- ldr r0, =MB86R0x_DDR2_BASE
- ldr r1, =CONFIG_SYS_DDR2_DRIMS_INIT
- strh r1, [r0, #DDR2_DRIMS]
-
- /*
- * (3) Wait for 20MCKPs(120nsec) or more
- */
- wait_timer 20
-
- /*
- * (4) IRESET/IUSRRST release
- */
- ldr r0, =MB86R0x_CCNT_BASE
- ldr r1, =CONFIG_SYS_CCNT_CDCRC_INIT_1
- str r1, [r0, #CCNT_CDCRC]
-
- /*
- * (5) Wait for 20MCKPs(120nsec) or more
- */
- wait_timer 20
-
- /*
- * (6) IDLLRST release
- */
- ldr r0, =MB86R0x_CCNT_BASE
- ldr r1, =CONFIG_SYS_CCNT_CDCRC_INIT_2
- str r1, [r0, #CCNT_CDCRC]
-
- /*
- * (7+8) Wait for 200us(=200000ns) or more (DDR2 Spec)
- */
- wait_timer 33536
-
- /*
- * (9) MCKE ON
- */
- ldr r0, =MB86R0x_DDR2_BASE
- ldr r1, =CONFIG_SYS_DDR2_DRIC1_INIT
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_DRIC2_INIT
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =CONFIG_SYS_DDR2_DRCA_INIT
- strh r1, [r0, #DDR2_DRCA]
- ldr r1, =MB86R0x_DDR2_DRCI_INIT
- strh r1, [r0, #DDR2_DRIC]
-
- /*
- * (10) Initialize SDRAM
- */
-
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- wait_timer 67 /* 400ns wait */
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_1
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_1
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_2
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_2
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_3
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_3
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_4
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_4
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_5
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_5
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- wait_timer 200
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_6
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_6
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_7
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_7
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- wait_timer 18 /* 105ns wait */
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_8
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_8
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- wait_timer 200 /* MRS to OCD: 200clock */
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_9
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_9
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_10
- strh r1, [r0, #DDR2_DRIC1]
- ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_10
- strh r1, [r0, #DDR2_DRIC2]
- ldr r1, =MB86R0x_DDR2_DRCI_CMD
- strh r1, [r0, #DDR2_DRIC]
-
- ldr r1, =CONFIG_SYS_DDR2_DRCM_INIT
- strh r1, [r0, #DDR2_DRCM]
-
- ldr r1, =CONFIG_SYS_DDR2_DRCST1_INIT
- strh r1, [r0, #DDR2_DRCST1]
-
- ldr r1, =CONFIG_SYS_DDR2_DRCST2_INIT
- strh r1, [r0, #DDR2_DRCST2]
-
- ldr r1, =CONFIG_SYS_DDR2_DRCR_INIT
- strh r1, [r0, #DDR2_DRCR]
-
- ldr r1, =CONFIG_SYS_DDR2_DRCF_INIT
- strh r1, [r0, #DDR2_DRCF]
-
- ldr r1, =CONFIG_SYS_DDR2_DRASR_INIT
- strh r1, [r0, #DDR2_DRASR]
-
- /*
- * (11) ODT setting
- */
- ldr r1, =CONFIG_SYS_DDR2_DROBS_INIT
- strh r1, [r0, #DDR2_DROBS]
- ldr r1, =CONFIG_SYS_DDR2_DROABA_INIT
- strh r1, [r0, #DDR2_DROABA]
- ldr r1, =CONFIG_SYS_DDR2_DRIBSODT1_INIT
- strh r1, [r0, #DDR2_DRIBSODT1]
-
- /*
- * (12) Shift to ODTCONT ON (SDRAM side) and DDR2 usual operation mode
- */
- ldr r1, =CONFIG_SYS_DDR2_DROS_INIT
- strh r1, [r0, #DDR2_DROS]
- ldr r1, =MB86R0x_DDR2_DRCI_NORMAL
- strh r1, [r0, #DDR2_DRIC]
-
- mov pc, lr
diff --git a/board/taskit/stamp9g20/Kconfig b/board/taskit/stamp9g20/Kconfig
index 3139f9a..1121dac 100644
--- a/board/taskit/stamp9g20/Kconfig
+++ b/board/taskit/stamp9g20/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
config SYS_VENDOR
default "taskit"
-config SYS_SOC
- default "at91"
-
config SYS_CONFIG_NAME
default "stamp9g20"
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index 1ddbb2c..722f9d5 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -37,4 +37,20 @@ config NOR_BOOT
booted via NOR. In this case we will enable certain pinmux early
as the ROM only partially sets up pinmux. We also default to using
NOR for environment.
+
+config DM
+ default y
+
+config DM_GPIO
+ default y if DM
+
+config DM_SERIAL
+ default y if DM
+
+config SYS_MALLOC_F
+ default y if DM
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if DM
+
endif
diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
index db96e34..3a7e04d 100644
--- a/board/ti/beagle_x15/board.c
+++ b/board/ti/beagle_x15/board.c
@@ -47,7 +47,8 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
.sdram_config_init = 0x61851b32,
.sdram_config = 0x61851b32,
.sdram_config2 = 0x00000000,
- .ref_ctrl = 0x00001035,
+ .ref_ctrl = 0x000040F1,
+ .ref_ctrl_final = 0x00001035,
.sdram_tim1 = 0xceef266b,
.sdram_tim2 = 0x328f7fda,
.sdram_tim3 = 0x027f88a8,
@@ -103,7 +104,8 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
.sdram_config_init = 0x61851b32,
.sdram_config = 0x61851b32,
.sdram_config2 = 0x00000000,
- .ref_ctrl = 0x00001035,
+ .ref_ctrl = 0x000040F1,
+ .ref_ctrl_final = 0x00001035,
.sdram_tim1 = 0xceef266b,
.sdram_tim2 = 0x328f7fda,
.sdram_tim3 = 0x027f88a8,
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index 04ec675..8892a28 100644
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -35,12 +35,14 @@ static struct aemif_config aemif_configs[] = {
int dram_init(void)
{
- ddr3_init();
+ u32 ddr3_size;
+
+ ddr3_size = ddr3_init();
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs);
- ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE);
+ ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE, ddr3_size);
return 0;
}
diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c
index 40fd966..35ffb42 100644
--- a/board/ti/ks2_evm/ddr3_k2e.c
+++ b/board/ti/ks2_evm/ddr3_k2e.c
@@ -11,11 +11,11 @@
#include "ddr3_cfg.h"
#include <asm/arch/ddr3.h>
-static int ddr3_size;
static struct pll_init_data ddr3_400 = DDR3_PLL_400;
-void ddr3_init(void)
+u32 ddr3_init(void)
{
+ u32 ddr3_size;
char dimm_name[32];
if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1))
@@ -43,13 +43,11 @@ void ddr3_init(void)
printf("DRAM: 4 GiB\n");
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g);
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g);
+ } else {
+ printf("Unknown SO-DIMM. Cannot configure DDR3\n");
+ while (1)
+ ;
}
-}
-/**
- * ddr3_get_size - return ddr3 size in GiB
- */
-int ddr3_get_size(void)
-{
return ddr3_size;
}
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
index a1c3d05..b36eb27 100644
--- a/board/ti/ks2_evm/ddr3_k2hk.c
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -12,14 +12,13 @@
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
-static int ddr3_size;
-
struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
-void ddr3_init(void)
+u32 ddr3_init(void)
{
char dimm_name[32];
+ u32 ddr3_size;
ddr3_get_dimm_params(dimm_name);
@@ -93,12 +92,6 @@ void ddr3_init(void)
/* Apply the workaround for PG 1.0 and 1.1 Silicons */
if (cpu_revision() <= 1)
ddr3_err_reset_workaround();
-}
-/**
- * ddr3_get_size - return ddr3 size in GiB
- */
-int ddr3_get_size(void)
-{
return ddr3_size;
}
diff --git a/board/ti/ks2_evm/ddr3_k2l.c b/board/ti/ks2_evm/ddr3_k2l.c
index 15a14f2..00fc194 100644
--- a/board/ti/ks2_evm/ddr3_k2l.c
+++ b/board/ti/ks2_evm/ddr3_k2l.c
@@ -11,28 +11,20 @@
#include "ddr3_cfg.h"
#include <asm/arch/ddr3.h>
-static int ddr3_size;
static struct pll_init_data ddr3_400 = DDR3_PLL_400;
-void ddr3_init(void)
+u32 ddr3_init(void)
{
init_pll(&ddr3_400);
/* No SO-DIMM, 2GB discreet DDR */
printf("DRAM: 2 GiB\n");
- ddr3_size = 2;
/* Reset DDR3 PHY after PLL enabled */
ddr3_reset_ddrphy();
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_2g);
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_2g);
-}
-/**
- * ddr3_get_size - return ddr3 size in GiB
- */
-int ddr3_get_size(void)
-{
- return ddr3_size;
+ return 2;
}
diff --git a/board/ti/tnetv107xevm/Kconfig b/board/ti/tnetv107xevm/Kconfig
deleted file mode 100644
index 637f20e..0000000
--- a/board/ti/tnetv107xevm/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_TNETV107X_EVM
-
-config SYS_BOARD
- default "tnetv107xevm"
-
-config SYS_VENDOR
- default "ti"
-
-config SYS_SOC
- default "tnetv107x"
-
-config SYS_CONFIG_NAME
- default "tnetv107x_evm"
-
-endif
diff --git a/board/ti/tnetv107xevm/MAINTAINERS b/board/ti/tnetv107xevm/MAINTAINERS
deleted file mode 100644
index 8a92c6b..0000000
--- a/board/ti/tnetv107xevm/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TNETV107XEVM BOARD
-#M: Chan-Taek Park <c-park@ti.com>
-S: Orphan (since 2014-06)
-F: board/ti/tnetv107xevm/
-F: include/configs/tnetv107x_evm.h
-F: configs/tnetv107x_evm_defconfig
diff --git a/board/ti/tnetv107xevm/Makefile b/board/ti/tnetv107xevm/Makefile
deleted file mode 100644
index 0a6128f..0000000
--- a/board/ti/tnetv107xevm/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += sdb_board.o
diff --git a/board/ti/tnetv107xevm/config.mk b/board/ti/tnetv107xevm/config.mk
deleted file mode 100644
index 51c2886..0000000
--- a/board/ti/tnetv107xevm/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-CONFIG_SYS_TEXT_BASE = 0x83FC0000
diff --git a/board/ti/tnetv107xevm/sdb_board.c b/board/ti/tnetv107xevm/sdb_board.c
deleted file mode 100644
index a84ec84..0000000
--- a/board/ti/tnetv107xevm/sdb_board.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TNETV107X-EVM: Board initialization
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <linux/mtd/nand.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/mux.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = {
- { /* CS0 */
- .mode = ASYNC_EMIF_MODE_NAND,
- .wr_setup = 5,
- .wr_strobe = 5,
- .wr_hold = 2,
- .rd_setup = 5,
- .rd_strobe = 5,
- .rd_hold = 2,
- .turn_around = 5,
- .width = ASYNC_EMIF_8,
- },
- { /* CS1 */
- .mode = ASYNC_EMIF_MODE_NOR,
- .wr_setup = 2,
- .wr_strobe = 27,
- .wr_hold = 4,
- .rd_setup = 2,
- .rd_strobe = 27,
- .rd_hold = 4,
- .turn_around = 2,
- .width = ASYNC_EMIF_PRESERVE,
- },
- { /* CS2 */
- .mode = ASYNC_EMIF_MODE_NOR,
- .wr_setup = 2,
- .wr_strobe = 27,
- .wr_hold = 4,
- .rd_setup = 2,
- .rd_strobe = 27,
- .rd_hold = 4,
- .turn_around = 2,
- .width = ASYNC_EMIF_PRESERVE,
- },
- { /* CS3 */
- .mode = ASYNC_EMIF_MODE_NOR,
- .wr_setup = 1,
- .wr_strobe = 90,
- .wr_hold = 3,
- .rd_setup = 1,
- .rd_strobe = 26,
- .rd_hold = 3,
- .turn_around = 1,
- .width = ASYNC_EMIF_8,
- },
-};
-
-static struct pll_init_data pll_config[] = {
- {
- .pll = ETH_PLL,
- .internal_osc = 1,
- .pll_freq = 500000000,
- .div_freq = {
- 5000000, 50000000, 125000000, 250000000, 25000000,
- },
- },
-};
-
-static const short sdio1_pins[] = {
- TNETV107X_PIN_SDIO1_CLK_1, TNETV107X_PIN_SDIO1_CMD_1,
- TNETV107X_PIN_SDIO1_DATA0_1, TNETV107X_PIN_SDIO1_DATA1_1,
- TNETV107X_PIN_SDIO1_DATA2_1, TNETV107X_PIN_SDIO1_DATA3_1,
- -1
-};
-
-static const short uart1_pins[] = {
- TNETV107X_PIN_UART1_RD, TNETV107X_PIN_UART1_TD, -1
-};
-
-static const short ssp_pins[] = {
- TNETV107X_PIN_SSP0_0, TNETV107X_PIN_SSP0_1, TNETV107X_PIN_SSP0_2,
- TNETV107X_PIN_SSP1_0, TNETV107X_PIN_SSP1_1, TNETV107X_PIN_SSP1_2,
- TNETV107X_PIN_SSP1_3, -1
-};
-
-int board_init(void)
-{
-#ifndef CONFIG_USE_IRQ
- __raw_writel(0, INTC_GLB_EN); /* Global disable */
- __raw_writel(0, INTC_HINT_EN); /* Disable host ints */
- __raw_writel(0, INTC_EN_CLR0 + 0); /* Clear enable */
- __raw_writel(0, INTC_EN_CLR0 + 4); /* Clear enable */
- __raw_writel(0, INTC_EN_CLR0 + 8); /* Clear enable */
-#endif
-
- gd->bd->bi_arch_number = MACH_TYPE_TNETV107X;
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- init_plls(ARRAY_SIZE(pll_config), pll_config);
-
- init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config);
-
- mux_select_pin(TNETV107X_PIN_ASR_CS3);
- mux_select_pins(sdio1_pins);
- mux_select_pins(uart1_pins);
- mux_select_pins(ssp_pins);
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
- davinci_nand_init(nand);
-
- return 0;
-}
-#endif
diff --git a/common/Kconfig b/common/Kconfig
index fd84fa0..f82bc88 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1,5 +1,4 @@
menu "Command line interface"
- depends on !SPL_BUILD
config HUSH_PARSER
bool "Use hush shell"
@@ -153,6 +152,29 @@ endmenu
menu "Device access commands"
+config CMD_DM
+ bool "dm - Access to driver model information"
+ depends on DM
+ default y
+ help
+ Provides access to driver model data structures and information,
+ such as a list of devices, list of uclasses and the state of each
+ device (e.g. activated). This is not required for operation, but
+ can be useful to see the state of driver model for debugging or
+ interest.
+
+config CMD_DEMO
+ bool "demo - Demonstration commands for driver model"
+ depends on DM
+ help
+ Provides a 'demo' command which can be used to play around with
+ driver model. To use this properly you will need to enable one or
+ both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+ Otherwise you will always get an empty list of devices. The demo
+ devices are defined in the sandbox device tree, so the easiest
+ option is to use sandbox and pass the -d point to sandbox's
+ u-boot.dtb file.
+
config CMD_LOADB
bool "loadb"
help
diff --git a/common/board_f.c b/common/board_f.c
index bdad36b..4d8b8a6 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -573,48 +573,22 @@ static int reserve_fdt(void)
return 0;
}
-static int reserve_stacks(void)
+int arch_reserve_stacks(void)
{
-#ifdef CONFIG_SPL_BUILD
-# ifdef CONFIG_ARM
- gd->start_addr_sp -= 128; /* leave 32 words for abort-stack */
- gd->irq_sp = gd->start_addr_sp;
-# endif
-#else
-# ifdef CONFIG_PPC
- ulong *s;
-# endif
+ return 0;
+}
- /* setup stack pointer for exceptions */
+static int reserve_stacks(void)
+{
+ /* make stack pointer 16-byte aligned */
gd->start_addr_sp -= 16;
gd->start_addr_sp &= ~0xf;
- gd->irq_sp = gd->start_addr_sp;
/*
- * Handle architecture-specific things here
- * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
- * to handle this and put in arch/xxx/lib/stack.c
+ * let the architecture specific code tailor gd->start_addr_sp and
+ * gd->irq_sp
*/
-# if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
-# ifdef CONFIG_USE_IRQ
- gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
- debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
- CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
-
- /* 8-byte alignment for ARM ABI compliance */
- gd->start_addr_sp &= ~0x07;
-# endif
- /* leave 3 words for abort-stack, plus 1 for alignment */
- gd->start_addr_sp -= 16;
-# elif defined(CONFIG_PPC)
- /* Clear initial stack frame */
- s = (ulong *) gd->start_addr_sp;
- *s = 0; /* Terminate back chain */
- *++s = 0; /* NULL return address */
-# endif /* Architecture specific code */
-
- return 0;
-#endif
+ return arch_reserve_stacks();
}
static int display_new_sp(void)
@@ -909,7 +883,7 @@ static init_fnc_t init_sequence_f[] = {
#endif
announce_dram_init,
/* TODO: unify all these dram functions? */
-#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
+#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32)
dram_init, /* configure available RAM banks */
#endif
#if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
@@ -1075,4 +1049,22 @@ void board_init_f_r(void)
/* NOTREACHED - board_init_r() does not return */
hang();
}
+#else
+ulong board_init_f_mem(ulong top)
+{
+ /* Leave space for the stack we are running with now */
+ top -= 0x40;
+
+ top -= sizeof(struct global_data);
+ top = ALIGN(top, 16);
+ gd = (struct global_data *)top;
+ memset((void *)gd, '\0', sizeof(*gd));
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+ top -= CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_base = top;
+#endif
+
+ return top;
+}
#endif /* CONFIG_X86 */
diff --git a/common/board_r.c b/common/board_r.c
index 907b33c..4fcd4f6 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -55,6 +55,9 @@
#include <dm/root.h>
#include <linux/compiler.h>
#include <linux/err.h>
+#ifdef CONFIG_AVR32
+#include <asm/arch/mmu.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -459,6 +462,18 @@ static int initr_env(void)
return 0;
}
+#ifdef CONFIG_SYS_BOOTPARAMS_LEN
+static int initr_malloc_bootparams(void)
+{
+ gd->bd->bi_boot_params = (ulong)malloc(CONFIG_SYS_BOOTPARAMS_LEN);
+ if (!gd->bd->bi_boot_params) {
+ puts("WARNING: Cannot allocate space for boot parameters\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SC3
/* TODO: with new initcalls, move this into the driver */
extern void sc3_read_eeprom(void);
@@ -486,7 +501,7 @@ static int initr_api(void)
#endif
/* enable exceptions */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
static int initr_enable_interrupts(void)
{
enable_interrupts();
@@ -775,6 +790,9 @@ init_fnc_t init_sequence_r[] = {
initr_dataflash,
#endif
initr_env,
+#ifdef CONFIG_SYS_BOOTPARAMS_LEN
+ initr_malloc_bootparams,
+#endif
INIT_FUNC_WATCHDOG_RESET
initr_secondary_cpu,
#ifdef CONFIG_SC3
@@ -810,10 +828,10 @@ init_fnc_t init_sequence_r[] = {
initr_kgdb,
#endif
interrupt_init,
-#if defined(CONFIG_ARM)
+#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
initr_enable_interrupts,
#endif
-#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
+#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32)
timer_init, /* initialize timer */
#endif
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
@@ -878,6 +896,10 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
int i;
#endif
+#ifdef CONFIG_AVR32
+ mmu_init_r(dest_addr);
+#endif
+
#if !defined(CONFIG_X86) && !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
gd = new_gd;
#endif
diff --git a/common/bootm.c b/common/bootm.c
index e2dc164..34f60bb 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -233,7 +233,7 @@ static int bootm_find_fdt(int flag, int argc, char * const argv[])
return 1;
}
- set_working_fdt_addr(images.ft_addr);
+ set_working_fdt_addr((ulong)images.ft_addr);
return 0;
}
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index e9eab23..aa81da2 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -345,8 +345,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
bd_t *bd = gd->bd;
print_num("boot_params", (ulong)bd->bi_boot_params);
- print_num("memstart", (ulong)bd->bi_memstart);
- print_lnum("memsize", (u64)bd->bi_memsize);
+ print_num("memstart", (ulong)bd->bi_dram[0].start);
+ print_lnum("memsize", (u64)bd->bi_dram[0].size);
print_num("flashstart", (ulong)bd->bi_flashstart);
print_num("flashsize", (ulong)bd->bi_flashsize);
print_num("flashoffset", (ulong)bd->bi_flashoffset);
diff --git a/common/cmd_blob.c b/common/cmd_blob.c
index 82ecaf0..d3f22a1 100644
--- a/common/cmd_blob.c
+++ b/common/cmd_blob.c
@@ -90,17 +90,19 @@ static char blob_help_text[] =
"enc src dst len km - Encapsulate and create blob of data\n"
" $len bytes long at address $src and\n"
" store the result at address $dst.\n"
- " $km is the 16 byte key modifier\n"
- " is also required for generation/use as\n"
- " key for cryptographic operation. Key\n"
- " modifier should be 16 byte long.\n"
+ " $km is the address where the key\n"
+ " modifier is stored.\n"
+ " The modifier is required for generation\n"
+ " /use as key for cryptographic operation.\n"
+ " Key modifier should be 16 byte long.\n"
"blob dec src dst len km - Decapsulate the blob of data at address\n"
" $src and store result of $len byte at\n"
" addr $dst.\n"
- " $km is the 16 byte key modifier\n"
- " is also required for generation/use as\n"
- " key for cryptographic operation. Key\n"
- " modifier should be 16 byte long.\n";
+ " $km is the address where the key\n"
+ " modifier is stored.\n"
+ " The modifier is required for generation\n"
+ " /use as key for cryptographic operation.\n"
+ " Key modifier should be 16 byte long.\n";
U_BOOT_CMD(
blob, 6, 1, do_blob,
diff --git a/common/cmd_demo.c b/common/cmd_demo.c
index bcb34d9..8a10bdf 100644
--- a/common/cmd_demo.c
+++ b/common/cmd_demo.c
@@ -97,7 +97,9 @@ static int do_demo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ARRAY_SIZE(demo_commands));
argc -= 2;
argv += 2;
- if (!demo_cmd || argc > demo_cmd->maxargs)
+
+ if ((!demo_cmd || argc > demo_cmd->maxargs) ||
+ ((demo_cmd->name[0] != 'l') && (argc < 1)))
return CMD_RET_USAGE;
if (argc) {
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index dc59fab..48b3e70 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -38,13 +38,13 @@ static int is_printable_string(const void *data, int len);
*/
struct fdt_header *working_fdt;
-void set_working_fdt_addr(void *addr)
+void set_working_fdt_addr(ulong addr)
{
void *buf;
- buf = map_sysmem((ulong)addr, 0);
+ buf = map_sysmem(addr, 0);
working_fdt = buf;
- setenv_addr("fdtaddr", addr);
+ setenv_ulong("fdtaddr", addr);
}
/*
@@ -111,7 +111,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (!blob || !fdt_valid(&blob))
return 1;
printf("The address of the fdt is %#08lx\n",
- control ? (ulong)blob :
+ control ? (ulong)map_to_sysmem(blob) :
getenv_hex("fdtaddr", 0));
return 0;
}
@@ -123,7 +123,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (control)
gd->fdt_blob = blob;
else
- set_working_fdt_addr((void *)blob);
+ set_working_fdt_addr(addr);
if (argc >= 2) {
int len;
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 7c3ad00..ad38cbf 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -342,9 +342,10 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
int ret;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
+ struct dm_i2c_chip *i2c_chip;
#endif
- if (argc != 5)
+ if ((argc < 5) || (argc > 6))
return cmd_usage(cmdtp);
/*
@@ -367,7 +368,7 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
return cmd_usage(cmdtp);
/*
- * Length is the number of objects, not number of bytes.
+ * Length is the number of bytes.
*/
length = simple_strtoul(argv[4], NULL, 16);
@@ -377,22 +378,47 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
ret = i2c_set_chip_offset_len(dev, alen);
if (ret)
return i2c_report_err(ret, I2C_ERR_WRITE);
+ i2c_chip = dev_get_parent_platdata(dev);
+ if (!i2c_chip)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
#endif
- while (length-- > 0) {
+ if (argc == 6 && !strcmp(argv[5], "-s")) {
+ /*
+ * Write all bytes in a single I2C transaction. If the target
+ * device is an EEPROM, it is your responsibility to not cross
+ * a page boundary. No write delay upon completion, take this
+ * into account if linking commands.
+ */
#ifdef CONFIG_DM_I2C
- ret = dm_i2c_write(dev, devaddr++, memaddr++, 1);
+ i2c_chip->flags &= ~DM_I2C_CHIP_WR_ADDRESS;
+ ret = dm_i2c_write(dev, devaddr, memaddr, length);
#else
- ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+ ret = i2c_write(chip, devaddr, alen, memaddr, length);
#endif
if (ret)
return i2c_report_err(ret, I2C_ERR_WRITE);
+ } else {
+ /*
+ * Repeated addressing - perform <length> separate
+ * write transactions of one byte each
+ */
+ while (length-- > 0) {
+#ifdef CONFIG_DM_I2C
+ i2c_chip->flags |= DM_I2C_CHIP_WR_ADDRESS;
+ ret = dm_i2c_write(dev, devaddr++, memaddr++, 1);
+#else
+ ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
/*
* No write delay with FRAM devices.
*/
#if !defined(CONFIG_SYS_I2C_FRAM)
- udelay(11000);
+ udelay(11000);
#endif
+ }
}
return 0;
}
@@ -518,7 +544,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
ret = i2c_read(chip, addr, alen, linebuf, linebytes);
#endif
if (ret)
- i2c_report_err(ret, I2C_ERR_READ);
+ return i2c_report_err(ret, I2C_ERR_READ);
else {
printf("%04x:", addr);
cp = linebuf;
@@ -616,7 +642,7 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
ret = i2c_write(chip, addr++, alen, &byte, 1);
#endif
if (ret)
- i2c_report_err(ret, I2C_ERR_WRITE);
+ return i2c_report_err(ret, I2C_ERR_WRITE);
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
@@ -798,16 +824,15 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
#endif
if (ret)
- i2c_report_err(ret, I2C_ERR_READ);
- else {
- data = cpu_to_be32(data);
- if (size == 1)
- printf(" %02lx", (data >> 24) & 0x000000FF);
- else if (size == 2)
- printf(" %04lx", (data >> 16) & 0x0000FFFF);
- else
- printf(" %08lx", data);
- }
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ data = cpu_to_be32(data);
+ if (size == 1)
+ printf(" %02lx", (data >> 24) & 0x000000FF);
+ else if (size == 2)
+ printf(" %04lx", (data >> 16) & 0x0000FFFF);
+ else
+ printf(" %08lx", data);
nbytes = cli_readline(" ? ");
if (nbytes == 0) {
@@ -848,7 +873,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
(uchar *)&data, size);
#endif
if (ret)
- i2c_report_err(ret, I2C_ERR_WRITE);
+ return i2c_report_err(ret,
+ I2C_ERR_WRITE);
#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
@@ -1730,7 +1756,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
#endif
if (argc == 1) {
#ifdef CONFIG_DM_I2C
- speed = i2c_get_bus_speed(bus);
+ speed = dm_i2c_get_bus_speed(bus);
#else
speed = i2c_get_bus_speed();
#endif
@@ -1740,7 +1766,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
speed = simple_strtoul(argv[1], NULL, 10);
printf("Setting bus speed to %d Hz\n", speed);
#ifdef CONFIG_DM_I2C
- ret = i2c_set_bus_speed(bus, speed);
+ ret = dm_i2c_set_bus_speed(bus, speed);
#else
ret = i2c_set_bus_speed(speed);
#endif
@@ -1827,7 +1853,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
- U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
+ U_BOOT_CMD_MKENT(write, 6, 0, do_i2c_write, "", ""),
#ifdef CONFIG_DM_I2C
U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
#endif
@@ -1894,7 +1920,8 @@ static char i2c_help_text[] =
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
"i2c probe [address] - test for and show device(s) on the I2C bus\n"
"i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
- "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
+ "i2c write memaddress chip address[.0, .1, .2] length [-s] - write memory\n"
+ " to I2C; the -s option selects bulk write in a single transaction\n"
#ifdef CONFIG_DM_I2C
"i2c flags chip [flags] - set or get chip flags\n"
#endif
@@ -1906,7 +1933,7 @@ static char i2c_help_text[] =
#endif
U_BOOT_CMD(
- i2c, 6, 1, do_i2c,
+ i2c, 7, 1, do_i2c,
"I2C sub-system",
i2c_help_text
);
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 4e28c9d..1335e3d 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -85,8 +85,12 @@ static void print_mmcinfo(struct mmc *mmc)
printf("Tran Speed: %d\n", mmc->tran_speed);
printf("Rd Block Len: %d\n", mmc->read_bl_len);
- printf("%s version %d.%d\n", IS_SD(mmc) ? "SD" : "MMC",
- (mmc->version >> 8) & 0xf, mmc->version & 0xff);
+ printf("%s version %d.%d", IS_SD(mmc) ? "SD" : "MMC",
+ EXTRACT_SDMMC_MAJOR_VERSION(mmc->version),
+ EXTRACT_SDMMC_MINOR_VERSION(mmc->version));
+ if (EXTRACT_SDMMC_CHANGE_VERSION(mmc->version) != 0)
+ printf(".%d", EXTRACT_SDMMC_CHANGE_VERSION(mmc->version));
+ printf("\n");
printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
puts("Capacity: ");
diff --git a/common/hash.c b/common/hash.c
index d154d02..9e9f84b 100644
--- a/common/hash.c
+++ b/common/hash.c
@@ -127,11 +127,21 @@ static struct hash_algo hash_algo[] = {
SHA1_SUM_LEN,
hw_sha1,
CHUNKSZ_SHA1,
+#ifdef CONFIG_SHA_PROG_HW_ACCEL
+ hw_sha_init,
+ hw_sha_update,
+ hw_sha_finish,
+#endif
}, {
"sha256",
SHA256_SUM_LEN,
hw_sha256,
CHUNKSZ_SHA256,
+#ifdef CONFIG_SHA_PROG_HW_ACCEL
+ hw_sha_init,
+ hw_sha_update,
+ hw_sha_finish,
+#endif
},
#endif
#ifdef CONFIG_SHA1
diff --git a/common/image-fdt.c b/common/image-fdt.c
index e3f06cd..d9e4728 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -190,7 +190,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
*of_flat_tree = of_start;
*of_size = of_len;
- set_working_fdt_addr(*of_flat_tree);
+ set_working_fdt_addr((ulong)*of_flat_tree);
return 0;
error:
diff --git a/common/image-fit.c b/common/image-fit.c
index b47d110..778d2a1 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -1010,9 +1010,7 @@ int fit_image_verify(const void *fit, int image_noffset)
}
/* Process all hash subnodes of the component image node */
- for (noffset = fdt_first_subnode(fit, image_noffset);
- noffset >= 0;
- noffset = fdt_next_subnode(fit, noffset)) {
+ fdt_for_each_subnode(fit, noffset, image_noffset) {
const char *name = fit_get_name(fit, noffset, NULL);
/*
diff --git a/common/image-sig.c b/common/image-sig.c
index 2c9f0cd..eda5e13 100644
--- a/common/image-sig.c
+++ b/common/image-sig.c
@@ -212,9 +212,7 @@ static int fit_image_verify_sig(const void *fit, int image_noffset,
int ret;
/* Process all hash subnodes of the component image node */
- for (noffset = fdt_first_subnode(fit, image_noffset);
- noffset >= 0;
- noffset = fdt_next_subnode(fit, noffset)) {
+ fdt_for_each_subnode(fit, noffset, image_noffset) {
const char *name = fit_get_name(fit, noffset, NULL);
if (!strncmp(name, FIT_SIG_NODENAME,
@@ -262,9 +260,7 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset,
return 0;
}
- for (noffset = fdt_first_subnode(sig_blob, sig_node);
- noffset >= 0;
- noffset = fdt_next_subnode(sig_blob, noffset)) {
+ fdt_for_each_subnode(sig_blob, noffset, sig_node) {
const char *required;
int ret;
@@ -397,9 +393,7 @@ static int fit_config_verify_sig(const void *fit, int conf_noffset,
int ret;
/* Process all hash subnodes of the component conf node */
- for (noffset = fdt_first_subnode(fit, conf_noffset);
- noffset >= 0;
- noffset = fdt_next_subnode(fit, noffset)) {
+ fdt_for_each_subnode(fit, noffset, conf_noffset) {
const char *name = fit_get_name(fit, noffset, NULL);
if (!strncmp(name, FIT_SIG_NODENAME,
@@ -444,9 +438,7 @@ int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
return 0;
}
- for (noffset = fdt_first_subnode(sig_blob, sig_node);
- noffset >= 0;
- noffset = fdt_next_subnode(sig_blob, noffset)) {
+ fdt_for_each_subnode(sig_blob, noffset, sig_node) {
const char *required;
int ret;
diff --git a/common/malloc_simple.c b/common/malloc_simple.c
index afdacff..64ae036 100644
--- a/common/malloc_simple.c
+++ b/common/malloc_simple.c
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
new_ptr = gd->malloc_ptr + bytes;
if (new_ptr > gd->malloc_limit)
- panic("Out of pre-reloc memory");
+ return NULL;
ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
return ptr;
diff --git a/common/spl/spl.c b/common/spl/spl.c
index daaeb50..ded0f30 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -229,6 +229,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
spl_sata_load_image();
break;
#endif
+#ifdef CONFIG_SPL_BOARD_LOAD_IMAGE
+ case BOOT_DEVICE_BOARD:
+ spl_board_load_image();
+ break;
+#endif
default:
#if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
puts("SPL: Unsupported Boot Device!\n");
diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
index 2c0e8e0..c2fee01 100644
--- a/common/spl/spl_nor.c
+++ b/common/spl/spl_nor.c
@@ -17,7 +17,7 @@ void spl_nor_load_image(void)
#ifdef CONFIG_SPL_OS_BOOT
if (!spl_start_uboot()) {
- struct image_header *header;
+ const struct image_header *header;
/*
* Load Linux from its location in NOR flash to its defined
diff --git a/config.mk b/config.mk
index 64c2951..6282919 100644
--- a/config.mk
+++ b/config.mk
@@ -24,6 +24,11 @@ VENDOR :=
ARCH := $(CONFIG_SYS_ARCH:"%"=%)
CPU := $(CONFIG_SYS_CPU:"%"=%)
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_TEGRA
+CPU := arm720t
+endif
+endif
BOARD := $(CONFIG_SYS_BOARD:"%"=%)
ifneq ($(CONFIG_SYS_VENDOR),)
VENDOR := $(CONFIG_SYS_VENDOR:"%"=%)
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
new file mode 100644
index 0000000..f8ceb6c
--- /dev/null
+++ b/configs/Ampe_A76_defconfig
@@ -0,0 +1,16 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
+CONFIG_FDTFILE="sun5i-a13-ampe-a76.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG01"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="AXP0-0"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_DRAM_CLK=432
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 680b631..1ef23e4 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun4i-a10-chuwi-v7-cw0825.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PB9"
+CONFIG_USB0_VBUS_DET="PH5"
CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:51000,le:19,ri:300,up:6,lo:31,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 204640e..6b784e2 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun4i-a10-hyundai-a7hd.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PB09"
+CONFIG_USB0_VBUS_DET="PH5"
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN="PH6"
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:45,ri:274,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
diff --git a/configs/Inet_86VS_defconfig b/configs/Inet_86VS_defconfig
index ce9985a..50c073a 100644
--- a/configs/Inet_86VS_defconfig
+++ b/configs/Inet_86VS_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun5i-a13-inet-86vs.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG1"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig
index 3b6dfa6..1e749cd 100644
--- a/configs/Linksprite_pcDuino3_fdt_defconfig
+++ b/configs/Linksprite_pcDuino3_fdt_defconfig
@@ -2,6 +2,8 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
CONFIG_OF_CONTROL=y
CONFIG_OF_SEPARATE=y
@@ -11,3 +13,5 @@ CONFIG_OF_SEPARATE=y
+S:CONFIG_DRAM_CLK=480
+S:CONFIG_DRAM_ZQ=122
+S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 7b7b9dd..c22286a 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
CONFIG_FDTFILE="sun5i-a13-tzx-q8-713b7.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG1"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
new file mode 100644
index 0000000..919a467
--- /dev/null
+++ b/configs/UTOO_P66_defconfig
@@ -0,0 +1,21 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_FDTFILE="sun5i-a13-utoo-p66.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB04"
+CONFIG_USB0_VBUS_DET="PG01"
+CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PG4"
+CONFIG_VIDEO_LCD_RESET="PG11"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_VIDEO_LCD_TL059WV5C0=y
++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++S:CONFIG_MMC0_CD_PIN="PG0"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_DRAM_CLK=432
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
diff --git a/configs/a320evb_defconfig b/configs/a320evb_defconfig
deleted file mode 100644
index 5ebf5e6..0000000
--- a/configs/a320evb_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_A320EVB=y
diff --git a/configs/afeb9260_defconfig b/configs/afeb9260_defconfig
index 2616d2d..694d24d 100644
--- a/configs/afeb9260_defconfig
+++ b/configs/afeb9260_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AFEB9260=y
diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig
index 23f0a32..f3544b5 100644
--- a/configs/am335x_igep0033_defconfig
+++ b/configs/am335x_igep0033_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig
index cf9d8c7..33b63c7 100644
--- a/configs/am3517_crane_defconfig
+++ b/configs/am3517_crane_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_AM3517_CRANE=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 2336f1e..7558b89 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_AM3517_EVM=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/arches_defconfig b/configs/arches_defconfig
index 18d0a14..30c6932 100644
--- a/configs/arches_defconfig
+++ b/configs/arches_defconfig
@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="ARCHES"
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_CANYONLANDS=y
+CONFIG_ARCHES=y
+CONFIG_DEFAULT_DEVICE_TREE="arches"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
diff --git a/configs/at91rm9200ek_defconfig b/configs/at91rm9200ek_defconfig
index 95b5c27..e1fd2ec 100644
--- a/configs/at91rm9200ek_defconfig
+++ b/configs/at91rm9200ek_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91RM9200EK=y
diff --git a/configs/at91rm9200ek_ram_defconfig b/configs/at91rm9200ek_ram_defconfig
index 5039ebc..64f5e54 100644
--- a/configs/at91rm9200ek_ram_defconfig
+++ b/configs/at91rm9200ek_ram_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91RM9200EK=y
diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig
index 7f929c8..46ce31b 100644
--- a/configs/at91sam9260ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs0_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig
index e2c32bf..9fd40df 100644
--- a/configs/at91sam9260ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs1_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig
index 1168cac..98adab2 100644
--- a/configs/at91sam9260ek_nandflash_defconfig
+++ b/configs/at91sam9260ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig
index 486eeb2..9c311a3 100644
--- a/configs/at91sam9261ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs0_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9261EK=y
diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig
index 5f42a90..3711fe4 100644
--- a/configs/at91sam9261ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs3_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9261EK=y
diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig
index 4d7aa90..503f760 100644
--- a/configs/at91sam9261ek_nandflash_defconfig
+++ b/configs/at91sam9261ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9261EK=y
diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig
index 4dce54e..15925b6 100644
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9263EK=y
diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig
index 4dce54e..15925b6 100644
--- a/configs/at91sam9263ek_dataflash_defconfig
+++ b/configs/at91sam9263ek_dataflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9263EK=y
diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig
index 6f60daa..457fb1a 100644
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9263EK=y
diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig
index 944c14d..e49b177 100644
--- a/configs/at91sam9263ek_norflash_boot_defconfig
+++ b/configs/at91sam9263ek_norflash_boot_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_BOOT_NORFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9263EK=y
diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig
index b54ef7f..fcd1764 100644
--- a/configs/at91sam9263ek_norflash_defconfig
+++ b/configs/at91sam9263ek_norflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NORFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9263EK=y
diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig
index 132102d..8334122 100644
--- a/configs/at91sam9g10ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9261EK=y
diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig
index 3dd3f9a..25626ce 100644
--- a/configs/at91sam9g10ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9261EK=y
diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig
index a2bd6df..7ae0794 100644
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9261EK=y
diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig
index 4eef04f..e277557 100644
--- a/configs/at91sam9g20ek_2mmc_defconfig
+++ b/configs/at91sam9g20ek_2mmc_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
index 1a4c505..29219fb 100644
--- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig
+++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig
index cf35782..4587f49 100644
--- a/configs/at91sam9g20ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig
index 1377ad9..c9fcc6e 100644
--- a/configs/at91sam9g20ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig
index cfe9127..1d60e0a 100644
--- a/configs/at91sam9g20ek_nandflash_defconfig
+++ b/configs/at91sam9g20ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig
index 1681bc8..6949d3a 100644
--- a/configs/at91sam9m10g45ek_mmc_defconfig
+++ b/configs/at91sam9m10g45ek_mmc_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9M10G45EK=y
diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig
index 61ae56e..30967e3 100644
--- a/configs/at91sam9m10g45ek_nandflash_defconfig
+++ b/configs/at91sam9m10g45ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9M10G45EK=y
diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig
index 71d1658..4fc417a 100644
--- a/configs/at91sam9n12ek_mmc_defconfig
+++ b/configs/at91sam9n12ek_mmc_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9N12EK=y
diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index 6f677b1..f908246 100644
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9N12EK=y
diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig
index 7e898f0..d106b5a 100644
--- a/configs/at91sam9n12ek_spiflash_defconfig
+++ b/configs/at91sam9n12ek_spiflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9N12EK=y
diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig
index 90516e0..ee632d1 100644
--- a/configs/at91sam9rlek_dataflash_defconfig
+++ b/configs/at91sam9rlek_dataflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9RLEK=y
diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig
index 0e2edfd..6465f57 100644
--- a/configs/at91sam9rlek_nandflash_defconfig
+++ b/configs/at91sam9rlek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9RLEK=y
diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig
index d00eed5..15b5fa9 100644
--- a/configs/at91sam9x5ek_dataflash_defconfig
+++ b/configs/at91sam9x5ek_dataflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9X5EK=y
diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig
index 64f7af9..c8096c2 100644
--- a/configs/at91sam9x5ek_mmc_defconfig
+++ b/configs/at91sam9x5ek_mmc_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_MMC"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9X5EK=y
diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index 47cd1e0..c2ebb00 100644
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9X5EK=y
diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig
index 1b7391e..76f68a6 100644
--- a/configs/at91sam9x5ek_spiflash_defconfig
+++ b/configs/at91sam9x5ek_spiflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9X5EK=y
diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig
index ccbccd4..1449791 100644
--- a/configs/at91sam9xeek_dataflash_cs0_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs0_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig
index e8f4cc3..b465064 100644
--- a/configs/at91sam9xeek_dataflash_cs1_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs1_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig
index 49c5d78..7e73d48 100644
--- a/configs/at91sam9xeek_nandflash_defconfig
+++ b/configs/at91sam9xeek_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9260EK=y
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index 076ad0f..abb64b6 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_TAURUS=y
diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig
new file mode 100644
index 0000000..c63dd4a
--- /dev/null
+++ b/configs/axs103_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SYS_TEXT_BASE=0x81000000
+CONFIG_SYS_CLK_FREQ=50000000
+CONFIG_ARC=y
+CONFIG_ISA_ARCV2=y
+CONFIG_TARGET_AXS101=y
diff --git a/configs/canyonlands_defconfig b/configs/canyonlands_defconfig
index 09b9ab9..44d4fbd 100644
--- a/configs/canyonlands_defconfig
+++ b/configs/canyonlands_defconfig
@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="CANYONLANDS"
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_CANYONLANDS=y
+CONFIG_CANYONLANDS=y
+CONFIG_DEFAULT_DEVICE_TREE="canyonlands"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
diff --git a/configs/cm4008_defconfig b/configs/cm4008_defconfig
deleted file mode 100644
index 487589d..0000000
--- a/configs/cm4008_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_CM4008=y
diff --git a/configs/cm41xx_defconfig b/configs/cm41xx_defconfig
deleted file mode 100644
index 15e9362..0000000
--- a/configs/cm41xx_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_CM41XX=y
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 3c0d64f..631698c 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -2,3 +2,8 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_FX6=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig
index 5ff4f9c..5c1d3cf 100644
--- a/configs/cm_t335_defconfig
+++ b/configs/cm_t335_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig
index 4000d2c..6eb37c0 100644
--- a/configs/cm_t3517_defconfig
+++ b/configs/cm_t3517_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=n
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_CM_T3517=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig
index 2bb616f..84a6fb0 100644
--- a/configs/cm_t35_defconfig
+++ b/configs/cm_t35_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_CM_T35=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 5d60847..82be323 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_CORVUS=y
diff --git a/configs/cpu9260_128M_defconfig b/configs/cpu9260_128M_defconfig
index 86fc6bd..6fe59dd 100644
--- a/configs/cpu9260_128M_defconfig
+++ b/configs/cpu9260_128M_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9260,CPU9260_128M"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9260_defconfig b/configs/cpu9260_defconfig
index 10299e3..63e7c73 100644
--- a/configs/cpu9260_defconfig
+++ b/configs/cpu9260_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9260"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9260_nand_128M_defconfig b/configs/cpu9260_nand_128M_defconfig
index e582a15..11c5bce 100644
--- a/configs/cpu9260_nand_128M_defconfig
+++ b/configs/cpu9260_nand_128M_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9260,CPU9260_128M,NANDBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9260_nand_defconfig b/configs/cpu9260_nand_defconfig
index 40988cd..d4d6ec9 100644
--- a/configs/cpu9260_nand_defconfig
+++ b/configs/cpu9260_nand_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9260,NANDBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9G20_128M_defconfig b/configs/cpu9G20_128M_defconfig
index 4c28d25..8d33f08 100644
--- a/configs/cpu9G20_128M_defconfig
+++ b/configs/cpu9G20_128M_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,CPU9G20_128M"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9G20_defconfig b/configs/cpu9G20_defconfig
index 468b2c8..fcfebb8 100644
--- a/configs/cpu9G20_defconfig
+++ b/configs/cpu9G20_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9G20"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9G20_nand_128M_defconfig b/configs/cpu9G20_nand_128M_defconfig
index a74df9d..315042d 100644
--- a/configs/cpu9G20_nand_128M_defconfig
+++ b/configs/cpu9G20_nand_128M_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,CPU9G20_128M,NANDBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpu9G20_nand_defconfig b/configs/cpu9G20_nand_defconfig
index 11cc276..c405c50 100644
--- a/configs/cpu9G20_nand_defconfig
+++ b/configs/cpu9G20_nand_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,NANDBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPU9260=y
diff --git a/configs/cpuat91_defconfig b/configs/cpuat91_defconfig
index d25bd3a..5a1ef3a 100644
--- a/configs/cpuat91_defconfig
+++ b/configs/cpuat91_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPUAT91=y
diff --git a/configs/cpuat91_ram_defconfig b/configs/cpuat91_ram_defconfig
index f5b722d..2759192 100644
--- a/configs/cpuat91_ram_defconfig
+++ b/configs/cpuat91_ram_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_CPUAT91=y
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index 578ae74..05a8700 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_DEVKIT8000=y
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
diff --git a/configs/dig297_defconfig b/configs/dig297_defconfig
index 95bc353..0d18290 100644
--- a/configs/dig297_defconfig
+++ b/configs/dig297_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_DIG297=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/dkb_defconfig b/configs/dkb_defconfig
deleted file mode 100644
index 0be9578..0000000
--- a/configs/dkb_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_DKB=y
diff --git a/configs/eb_cpux9k2_defconfig b/configs/eb_cpux9k2_defconfig
index 5f0ab44..257fee5 100644
--- a/configs/eb_cpux9k2_defconfig
+++ b/configs/eb_cpux9k2_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_EB_CPUX9K2=y
diff --git a/configs/eb_cpux9k2_ram_defconfig b/configs/eb_cpux9k2_ram_defconfig
index c6e8b71..4393ccc 100644
--- a/configs/eb_cpux9k2_ram_defconfig
+++ b/configs/eb_cpux9k2_ram_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_EB_CPUX9K2=y
diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig
index e45bdad..e07df8b 100644
--- a/configs/eco5pk_defconfig
+++ b/configs/eco5pk_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_ECO5PK=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig
index 5be495c..9a3d40a 100644
--- a/configs/ethernut5_defconfig
+++ b/configs/ethernut5_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_ETHERNUT5=y
diff --git a/configs/glacier_defconfig b/configs/glacier_defconfig
index 2a66bfb..d318f82 100644
--- a/configs/glacier_defconfig
+++ b/configs/glacier_defconfig
@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="GLACIER"
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_CANYONLANDS=y
+CONFIG_GLACIER=y
+CONFIG_DEFAULT_DEVICE_TREE="glacier"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
diff --git a/configs/glacier_ramboot_defconfig b/configs/glacier_ramboot_defconfig
new file mode 100644
index 0000000..f8363b2
--- /dev/null
+++ b/configs/glacier_ramboot_defconfig
@@ -0,0 +1,8 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/canyonlands/u-boot-ram.lds"
+CONFIG_PPC=y
+CONFIG_4xx=y
+CONFIG_TARGET_CANYONLANDS=y
+CONFIG_GLACIER=y
+CONFIG_DEFAULT_DEVICE_TREE="glacier"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig
index 4cddbdd..5b1a4c4 100644
--- a/configs/gwventana_defconfig
+++ b/configs/gwventana_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/hawkboard_defconfig b/configs/hawkboard_defconfig
deleted file mode 100644
index 4084f9c..0000000
--- a/configs/hawkboard_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SPL=y
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_DAVINCI=y
-+S:CONFIG_TARGET_HAWKBOARD=y
diff --git a/configs/hawkboard_uart_defconfig b/configs/hawkboard_uart_defconfig
deleted file mode 100644
index d7eeae7..0000000
--- a/configs/hawkboard_uart_defconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="UART_U_BOOT"
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_DAVINCI=y
-+S:CONFIG_TARGET_HAWKBOARD=y
diff --git a/configs/jadecpu_defconfig b/configs/jadecpu_defconfig
deleted file mode 100644
index 4348e0e..0000000
--- a/configs/jadecpu_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_JADECPU=y
diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig
index c2031f8..6566d40 100644
--- a/configs/mcx_defconfig
+++ b/configs/mcx_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_MCX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig
index fa737ef..0430d58 100644
--- a/configs/meesc_dataflash_defconfig
+++ b/configs/meesc_dataflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_MEESC=y
diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig
index f58efbb..b8a48f8 100644
--- a/configs/meesc_defconfig
+++ b/configs/meesc_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_MEESC=y
diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig
index 7bc9085..d124289 100644
--- a/configs/minnowmax_defconfig
+++ b/configs/minnowmax_defconfig
@@ -7,7 +7,5 @@ CONFIG_DEFAULT_DEVICE_TREE="minnowmax"
CONFIG_VIDEO_X86=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
-CONFIG_DEBUG_UART_NS16550=y
-CONFIG_DEBUG_UART=y
CONFIG_MMCONF_BASE_ADDRESS=0xe0000000
CONFIG_HAVE_INTEL_ME=y
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
index a0678bb..a4747c6 100644
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_MT_VENTOUX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig
index b649935..47f3f87 100644
--- a/configs/mx6dlsabreauto_defconfig
+++ b/configs/mx6dlsabreauto_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig
index 7f6cdff..6adfd55 100644
--- a/configs/mx6dlsabresd_defconfig
+++ b/configs/mx6dlsabresd_defconfig
@@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig
index 7d86700..ab72942 100644
--- a/configs/mx6qsabreauto_defconfig
+++ b/configs/mx6qsabreauto_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig
index dfa9c2e..50b75ae 100644
--- a/configs/mx6qsabrelite_defconfig
+++ b/configs/mx6qsabrelite_defconfig
@@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE"
CONFIG_ARM=y
CONFIG_TARGET_NITROGEN6X=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig
index 67c1b77..112918b 100644
--- a/configs/mx6qsabresd_defconfig
+++ b/configs/mx6qsabresd_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index 12e7844..67079ba 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -2,4 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_MX6SABRESD=y
-
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index f23d48f..cc82322 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
CONFIG_ARM=y
CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig
index 6b36e06..901b01b 100644
--- a/configs/mx6sxsabresd_spl_defconfig
+++ b/configs/mx6sxsabresd_spl_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index e03f586..1bb7664 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -1,3 +1,8 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_NOKIA_RX51=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig
index a842837..816a3fa 100644
--- a/configs/odroid_defconfig
+++ b/configs/odroid_defconfig
@@ -3,3 +3,5 @@ CONFIG_ARCH_EXYNOS=y
CONFIG_TARGET_ODROID=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid"
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_COMPAT=y
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index a3e4c2c..5a2d20b 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND"
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_BEAGLE=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index c749aa7..3bb1911 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_EVM=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig
index e89bb82..4e1471b 100644
--- a/configs/omap3_evm_quick_mmc_defconfig
+++ b/configs/omap3_evm_quick_mmc_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig
index e70fddd..f98672f 100644
--- a/configs/omap3_evm_quick_nand_defconfig
+++ b/configs/omap3_evm_quick_nand_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig
index 50bffa9..1a8b1b4 100644
--- a/configs/omap3_ha_defconfig
+++ b/configs/omap3_ha_defconfig
@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA"
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TAO3530=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 5f2c063..790ccba 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_LOGIC=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig
index fb6edc2..b75f513 100644
--- a/configs/omap3_mvblx_defconfig
+++ b/configs/omap3_mvblx_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_MVBLX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig
index bf28537..dd0f17c 100644
--- a/configs/omap3_pandora_defconfig
+++ b/configs/omap3_pandora_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_PANDORA=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_sdp3430_defconfig b/configs/omap3_sdp3430_defconfig
index 1172c2a..b3a8745 100644
--- a/configs/omap3_sdp3430_defconfig
+++ b/configs/omap3_sdp3430_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_SDP3430=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/otc570_dataflash_defconfig b/configs/otc570_dataflash_defconfig
index 992d6b6..7aac6d8 100644
--- a/configs/otc570_dataflash_defconfig
+++ b/configs/otc570_dataflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_OTC570=y
diff --git a/configs/otc570_defconfig b/configs/otc570_defconfig
index 65295cb..5204245 100644
--- a/configs/otc570_defconfig
+++ b/configs/otc570_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_OTC570=y
diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig
index 8b27682..baa2b23 100644
--- a/configs/pcm051_rev1_defconfig
+++ b/configs/pcm051_rev1_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig
index 27ad6ff..b5c62a6 100644
--- a/configs/pcm051_rev3_defconfig
+++ b/configs/pcm051_rev3_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
index 8ada0db..333e335 100644
--- a/configs/peach-pi_defconfig
+++ b/configs/peach-pi_defconfig
@@ -3,3 +3,7 @@ CONFIG_SPL=y
+S:CONFIG_ARCH_EXYNOS=y
+S:CONFIG_TARGET_PEACH_PI=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi"
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_CMD_CROS_EC=y
diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig
index b944b3b..cf84444 100644
--- a/configs/peach-pit_defconfig
+++ b/configs/peach-pit_defconfig
@@ -3,3 +3,7 @@ CONFIG_SPL=y
+S:CONFIG_ARCH_EXYNOS=y
+S:CONFIG_TARGET_PEACH_PIT=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit"
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_CMD_CROS_EC=y
diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig
index 1b9aa68..cbdd404 100644
--- a/configs/pengwyn_defconfig
+++ b/configs/pengwyn_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig
index 22c7bb4..14266ef 100644
--- a/configs/pepper_defconfig
+++ b/configs/pepper_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PEPPER=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index 86b4b15..fa8d291 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -39,4 +39,4 @@ CONFIG_DM_I2C=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-S:CONFIG_SPL_NAND_DENALI=y
+CONFIG_SPL_NAND_DENALI=y
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index 242bcf9..12f0694 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -39,4 +39,4 @@ CONFIG_DM_I2C=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-S:CONFIG_SPL_NAND_DENALI=y
+CONFIG_SPL_NAND_DENALI=y
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index 8e95f17..e66d166 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -39,4 +39,4 @@ CONFIG_DM_I2C=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-S:CONFIG_SPL_NAND_DENALI=y
+CONFIG_SPL_NAND_DENALI=y
diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig
index b8a0248..0c7efc7 100644
--- a/configs/pm9261_defconfig
+++ b/configs/pm9261_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_PM9261=y
diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index 3a5029a..6e88046 100644
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_PM9263=y
diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig
index 89297e0..112ad5f 100644
--- a/configs/pm9g45_defconfig
+++ b/configs/pm9g45_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_PM9G45=y
diff --git a/configs/portuxg20_defconfig b/configs/portuxg20_defconfig
index b1634e9..9f3a8e1 100644
--- a/configs/portuxg20_defconfig
+++ b/configs/portuxg20_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,PORTUXG20"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_STAMP9G20=y
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
new file mode 100644
index 0000000..b539d4a
--- /dev/null
+++ b/configs/rpi_2_defconfig
@@ -0,0 +1,4 @@
+CONFIG_ARM=y
+CONFIG_TARGET_RPI_2=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 9379cf0..98d3199 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -1,2 +1,4 @@
CONFIG_ARM=y
CONFIG_TARGET_RPI=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig
index 618e590..33e6fb8 100644
--- a/configs/s5p_goni_defconfig
+++ b/configs/s5p_goni_defconfig
@@ -2,3 +2,5 @@ CONFIG_ARM=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_TARGET_S5P_GONI=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig
index a7d791f..1d95487 100644
--- a/configs/sama5d3_xplained_mmc_defconfig
+++ b/configs/sama5d3_xplained_mmc_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D3_XPLAINED=y
diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index b972860..91dd104 100644
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D3_XPLAINED=y
diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index 3f8d997..c03106c 100644
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D3XEK=y
diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig
index 7a92417..54bf79c 100644
--- a/configs/sama5d3xek_nandflash_defconfig
+++ b/configs/sama5d3xek_nandflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D3XEK=y
diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig
index c83a7ab..07bff18 100644
--- a/configs/sama5d3xek_spiflash_defconfig
+++ b/configs/sama5d3xek_spiflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D3XEK=y
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
index 73df28c..da5f811 100644
--- a/configs/sama5d4_xplained_mmc_defconfig
+++ b/configs/sama5d4_xplained_mmc_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index 046fe06..ea06200 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index 755dd8b..0408fa4 100644
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig
index aafb4c2..1f66d37 100644
--- a/configs/sama5d4ek_mmc_defconfig
+++ b/configs/sama5d4ek_mmc_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D4EK=y
diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig
index d430fa7..c623d9b 100644
--- a/configs/sama5d4ek_nandflash_defconfig
+++ b/configs/sama5d4ek_nandflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D4EK=y
diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig
index 796fa4b..3b4e124 100644
--- a/configs/sama5d4ek_spiflash_defconfig
+++ b/configs/sama5d4ek_spiflash_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_SAMA5D4EK=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 660063e..70f5b86 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -5,3 +5,10 @@ CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DM=y
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_CROS_EC=y
+CONFIG_DM_CROS_EC=y
+CONFIG_CROS_EC_SANDBOX=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_CMD_CROS_EC=y
diff --git a/configs/sbc35_a9g20_eeprom_defconfig b/configs/sbc35_a9g20_eeprom_defconfig
index aa9cd3e..cd0909c 100644
--- a/configs/sbc35_a9g20_eeprom_defconfig
+++ b/configs/sbc35_a9g20_eeprom_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_SBC35_A9G20=y
diff --git a/configs/sbc35_a9g20_nandflash_defconfig b/configs/sbc35_a9g20_nandflash_defconfig
index fba9f31..017346f 100644
--- a/configs/sbc35_a9g20_nandflash_defconfig
+++ b/configs/sbc35_a9g20_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_SBC35_A9G20=y
diff --git a/configs/silk_defconfig b/configs/silk_defconfig
new file mode 100644
index 0000000..515ee33
--- /dev/null
+++ b/configs/silk_defconfig
@@ -0,0 +1,3 @@
+CONFIG_ARM=y
+CONFIG_RMOBILE=y
+CONFIG_TARGET_SILK=y
diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig
index 041030f..e933a32 100644
--- a/configs/smdkc100_defconfig
+++ b/configs/smdkc100_defconfig
@@ -2,3 +2,5 @@ CONFIG_ARM=y
CONFIG_TARGET_SMDKC100=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig
index 7055e2a..3a47505 100644
--- a/configs/snapper9260_defconfig
+++ b/configs/snapper9260_defconfig
@@ -1,3 +1,9 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_SNAPPER9260=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig
index 2faae15..1f0244b 100644
--- a/configs/snapper9g20_defconfig
+++ b/configs/snapper9g20_defconfig
@@ -1,3 +1,9 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_SNAPPER9260=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/snow_defconfig b/configs/snow_defconfig
index 14ed793..353ddb0 100644
--- a/configs/snow_defconfig
+++ b/configs/snow_defconfig
@@ -3,3 +3,8 @@ CONFIG_SPL=y
+S:CONFIG_ARCH_EXYNOS=y
+S:CONFIG_TARGET_SNOW=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow"
+CONFIG_CROS_EC=y
+CONFIG_DM_CROS_EC=y
+CONFIG_CROS_EC_I2C=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_CMD_CROS_EC=y
diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig
index 0f3896d..888bbb6 100644
--- a/configs/socfpga_socrates_defconfig
+++ b/configs/socfpga_socrates_defconfig
@@ -3,3 +3,6 @@ CONFIG_SPL=y
+S:CONFIG_TARGET_SOCFPGA_CYCLONE5=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
+CONFIG_DM=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
diff --git a/configs/stamp9g20_defconfig b/configs/stamp9g20_defconfig
index 8c0f874..03bf492 100644
--- a/configs/stamp9g20_defconfig
+++ b/configs/stamp9g20_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_STAMP9G20=y
diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig
index a05e991..1c9ba88 100644
--- a/configs/stv0991_defconfig
+++ b/configs/stv0991_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="stv0991"
CONFIG_ARM=y
CONFIG_TARGET_STV0991=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig
index a511389..39ed872 100644
--- a/configs/tao3530_defconfig
+++ b/configs/tao3530_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TAO3530=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 438e25d..fac3316 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
+S:CONFIG_ARM=y
++S:CONFIG_ARCH_AT91=y
+S:CONFIG_TARGET_TAURUS=y
diff --git a/configs/tnetv107x_evm_defconfig b/configs/tnetv107x_evm_defconfig
deleted file mode 100644
index b0915d2..0000000
--- a/configs/tnetv107x_evm_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_TNETV107X_EVM=y
diff --git a/configs/tny_a9260_eeprom_defconfig b/configs/tny_a9260_eeprom_defconfig
index a662669..28a1d5e 100644
--- a/configs/tny_a9260_eeprom_defconfig
+++ b/configs/tny_a9260_eeprom_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_EEPROM"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_TNY_A9260=y
diff --git a/configs/tny_a9260_nandflash_defconfig b/configs/tny_a9260_nandflash_defconfig
index 41fd9c1..14710c0 100644
--- a/configs/tny_a9260_nandflash_defconfig
+++ b/configs/tny_a9260_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_TNY_A9260=y
diff --git a/configs/tny_a9g20_eeprom_defconfig b/configs/tny_a9g20_eeprom_defconfig
index a2eb60e..f4023cc 100644
--- a/configs/tny_a9g20_eeprom_defconfig
+++ b/configs/tny_a9g20_eeprom_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_TNY_A9260=y
diff --git a/configs/tny_a9g20_nandflash_defconfig b/configs/tny_a9g20_nandflash_defconfig
index 60ebfa2..2452e1e 100644
--- a/configs/tny_a9g20_nandflash_defconfig
+++ b/configs/tny_a9g20_nandflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_TNY_A9260=y
diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig
index 7ea5e02..3efe829 100644
--- a/configs/tricorder_defconfig
+++ b/configs/tricorder_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TRICORDER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig
index f6e1c46..8f999ff 100644
--- a/configs/tricorder_flash_defconfig
+++ b/configs/tricorder_flash_defconfig
@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD"
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TRICORDER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/twister_defconfig b/configs/twister_defconfig
index 9023736..d21a551 100644
--- a/configs/twister_defconfig
+++ b/configs/twister_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TWISTER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig
index 8c0ac11..ae2b9a1 100644
--- a/configs/usb_a9263_dataflash_defconfig
+++ b/configs/usb_a9263_dataflash_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_USB_A9263=y
diff --git a/configs/vl_ma2sc_defconfig b/configs/vl_ma2sc_defconfig
index 39cd725..e6478a7 100644
--- a/configs/vl_ma2sc_defconfig
+++ b/configs/vl_ma2sc_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_VL_MA2SC=y
diff --git a/configs/vl_ma2sc_ram_defconfig b/configs/vl_ma2sc_ram_defconfig
index 70a07ab..fdb262d 100644
--- a/configs/vl_ma2sc_ram_defconfig
+++ b/configs/vl_ma2sc_ram_defconfig
@@ -1,3 +1,4 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMLOAD"
CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
CONFIG_TARGET_VL_MA2SC=y
diff --git a/doc/README.fsl-trustzone-components b/doc/README.fsl-trustzone-components
new file mode 100644
index 0000000..a3afd1f
--- /dev/null
+++ b/doc/README.fsl-trustzone-components
@@ -0,0 +1,25 @@
+Freescale ARM64 SoCs like LS2085A have ARM TrustZone components like
+TZPC-BP147 (TrustZone Protection Controller) and TZASC-400 (TrustZone
+Address Space Controller).
+
+While most of the configuration related programming of these peripherals
+is left to a root-of-trust security software layer (running in EL3
+privilege mode), but still some configurations of these peripherals
+might be required while the bootloader is executing in EL3 privilege
+mode. The following sections define how to turn on these features for
+LS2085A like SoCs.
+
+TZPC-BP147 (TrustZone Protection Controller)
+============================================
+- Depends on CONFIG_FSL_TZPC_BP147 configuration flag.
+- Separates Secure World and Normal World on-chip RAM (OCRAM) spaces.
+- Provides a programming model to set access control policy via the TZPC
+ TZDECPROT Registers.
+
+TZASC-400 (TrustZone Address Space Controller)
+==============================================
+- Depends on CONFIG_FSL_TZASC_400 configuration flag.
+- Separates Secure World and Normal World external memory spaces for bus masters
+ such as processors and DMA-equipped peripherals.
+- Supports 8 fully programmable address regions, initially inactive at reset,
+ and one base region, always active, that covers the remaining address space.
diff --git a/doc/README.kconfig b/doc/README.kconfig
index 69dc459..288d17d 100644
--- a/doc/README.kconfig
+++ b/doc/README.kconfig
@@ -17,109 +17,45 @@ source directory for a basic specification of Kconfig.
Difference from Linux's Kconfig
-------------------------------
-The biggest difference between Linux Kernel and U-Boot in terms of the
-configuration is that U-Boot has to configure multiple boot images per board:
-Normal, SPL, TPL.
-Kconfig functions need to be expanded for U-Boot to handle multiple images.
-The files scripts/kconfig/* were imported from Linux Kernel and adjusted
-for that purpose.
+Here are some worth-mentioning configuration targets.
-See below for how each configuration target works in U-Boot:
+- silentoldconfig
-- config, nconfig, menuconfig, xconfig, gconfig
+ This target updates .config, include/generated/autoconf.h and
+ include/configs/* as in Linux. In U-Boot, it also does the followings
+ for the compatibility with the old configuration system:
- These targets are used to configure Normal and create (or modify) the
- .config file. For SPL configuration, the configutation targets are prefixed
- with "spl/", for example "make spl/config", "make spl/menuconfig", etc.
- Those targets create or modify the spl/.config file. Likewise, run
- "make tpl/config", "make tpl/menuconfig", etc. for TPL.
+ * create a symbolic link "arch/${ARCH}/include/asm/arch" pointing to
+ the SoC/CPU specific header directory
+ * create include/config.h
+ * create include/autoconf.mk
+ * create spl/include/autoconf.mk (SPL and TPL only)
+ * create tpl/include/autoconf.mk (TPL only)
-- silentoldconfig
+ If we could completely switch to Kconfig in a long run
+ (i.e. remove all the include/configs/*.h), those additional processings
+ above would be removed.
- This target updates .config, include/generated/autoconf.h and
- include/configs/*. In U-Boot, the same thing is done for SPL, TPL,
- if supported by the target board. Depending on whether CONFIG_SPL and
- CONFIG_TPL are defined, "make silentoldconfig" iterates three times at most
- changing the work directory.
-
- To sum up, "make silentoldconfig" possibly updates:
- - .config, include/generated/autoconf.h, include/config/*
- - spl/.config, spl/include/generated/autoconf.h, spl/include/config/*
- (in case CONFIG_SPL=y)
- - tpl/.config, tpl/include/generated/autoconf.h, tpl/include/config/*
- (in case CONFIG_TPL=y)
-
-- defconfig, <board>_defconfig
-
- The target "<board>_defconfig" is used to create the .config based on the
- file configs/<board>_defconfig. The "defconfig" target is the same
- except it checks for a file specified with KBUILD_DEFCONFIG environment.
-
- Note:
- The defconfig files are placed under the "configs" directory,
- not "arch/$(ARCH)/configs". This is because "ARCH" is not necessarily
- given from the command line for the U-Boot configuration and build.
-
- The defconfig file format in U-Boot has the special syntax; each line has
- "<condition>:" prefix to show which image(s) the line is valid for.
- For example,
-
- CONFIG_FOO=100
- S:CONFIG_FOO=200
- T:CONFIG_FOO=300
- ST:CONFIG_BAR=y
- +S:CONFIG_BAZ=y
- +T:CONFIG_QUX=y
- +ST:CONFIG_QUUX=y
-
- Here, the "<condition>:" prefix is one of:
- None - the line is valid only for Normal image
- S: - the line is valid only for SPL image
- T: - the line is valid only for TPL image
- ST: - the line is valid for SPL and TPL images
- +S: - the line is valid for Normal and SPL images
- +T: - the line is valid for Normal and TPL images
- +ST: - the line is valid for Normal, SPL and TPL images
-
- So, if neither CONFIG_SPL nor CONFIG_TPL is defined, the defconfig file
- has no "<condition>:" part and therefore has the same form as in Linux.
- From the example defconfig shown above, three separete configuration sets
- are generated and used for creating .config, spl/.config and tpl/.config.
-
- - Input for the default configuration of Normal
- CONFIG_FOO=100
- CONFIG_BAZ=y
- CONFIG_QUX=y
- CONFIG_QUUX=y
-
- - Input for the default configuration of SPL
- CONFIG_FOO=200
- CONFIG_BAR=y
- CONFIG_BAZ=y
- CONFIG_QUUX=y
-
- - Input for the default configuration of TPL
- CONFIG_FOO=300
- CONFIG_BAR=y
- CONFIG_QUX=y
- CONFIG_QUUX=y
-
-- savedefconfig
-
- This is the reverse operation of "make defconfig". If neither CONFIG_SPL
- nor CONFIG_TPL is defined in the .config file, it works like "savedefconfig"
- in Linux Kernel: creates the minimal set of config based on the .config
- and saves it into the "defconfig" file. If CONFIG_SPL (and CONFIG_TPL) is
- defined, the common lines among .config, spl/.config (and tpl/.config) are
- coalesced together with "<condition:>" prefix for each line as shown above.
- This file can be used as an input of "defconfig" target.
+- defconfig
+
+ In U-Boot, "make defconfig" is a shorthand of "make sandbox_defconfig"
+
+- <board>_defconfig
+
+ Now it works as in Linux.
+ The prefixes such as "+S:" in *_defconfig are deprecated.
+ You can simply remove the prefixes. Do not add them for new boards.
- <board>_config
This does not exist in Linux's Kconfig.
+ "make <board>_config" works the same as "make <board>_defconfig".
Prior to Kconfig, in U-Boot, "make <board>_config" was used for the
- configuration. It is still supported for backward compatibility and
- its behavior is the same as "make <board>_defconfig".
+ configuration. It is still supported for backward compatibility, so
+ we do not need to update the distro recipes.
+
+
+The other configuration targets work as in Linux Kernel.
Migration steps to Kconfig
@@ -137,14 +73,10 @@ based configuration as follows:
Configuration files for use in C sources
- include/generated/autoconf.h (generated by Kconfig for Normal)
- - spl/include/generated/autoconf.h (generated by Kconfig for SPL)
- - tpl/include/generated/autoconf.h (generated by Kconfig for TPL)
- include/configs/<board>.h (exists for all boards)
Configuration file for use in makefiles
- - include/config/auto.conf (generated by Kconfig for Normal)
- - spl/include/config/auto.conf (generated by Kconfig for SPL)
- - tpl/include/config/auto.conf (generated by Kconfig for TPL)
+ - include/config/auto.conf (generated by Kconfig)
- include/autoconf.mk (generated by the old config for Normal)
- spl/include/autoconfig.mk (generated by the old config for SPL)
- tpl/include/autoconfig.mk (generated by the old config for TPL)
@@ -215,8 +147,8 @@ TODO
CONFIG_SYS_EXTRA_OPTIONS should not be used for new boards.
- In the pre-Kconfig, a single board had multiple entries in the boards.cfg
- file with differences in the option fields. The correspoing defconfig files
- were auto-generated when switching to Kconfig. Now we have too many
+ file with differences in the option fields. The corresponding defconfig
+ files were auto-generated when switching to Kconfig. Now we have too many
defconfig files compared with the number of the supported boards. It is
recommended to have only one defconfig per board and allow users to select
the config options.
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 952ab87..cd8f4ae 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,23 +12,30 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-icecube_5200 powerpc mpc5xxx - - Wolfgang Denk <wd@denx.de>
-Lite5200 powerpc mpc5xxx - -
-cpci5200 powerpc mpc5xxx - - Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-mecp5200 powerpc mpc5xxx - - Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-pf5200 powerpc mpc5xxx - - Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-PM520 powerpc mpc5xxx - - Josef Wagner <Wagner@Microsys.de>
-Total5200 powerpc mpc5xxx - -
-CATcenter powerpc ppc4xx - -
-PPChameleonEVB powerpc ppc4xx - - Andrea "llandre" Marson <andrea.marson@dave-tech.it>
-P2020DS powerpc mpc85xx - -
-P2020COME powerpc mpc85xx - - Ira W. Snyder <iws@ovro.caltech.edu>
-P2020RDB powerpc mpc85xx - - Poonam Aggrwal <poonam.aggrwal@freescale.com>
-P2010RDB powerpc mpc85xx - -
-P1020RDB powerpc mpc85xx - -
-P1011RDB powerpc mpc85xx - -
-MPC8360EMDS powerpc mpc83xx - - Dave Liu <daveliu@freescale.com>
-MPC8360ERDK powerpc mpc83xx - - Anton Vorontsov <avorontsov@ru.mvista.com>
+hawkboard arm arm926ejs - - Syed Mohammed Khasim <sm.khasim@gmail.com>:Sughosh Ganu <urwithsughosh@gmail.com>
+tnetv107x arm arm1176 - - Chan-Taek Park <c-park@ti.com>
+a320evb arm arm920t - - Po-Yu Chuang <ratbert@faraday-tech.com>
+cm4008 arm arm920t - - Greg Ungerer <greg.ungerer@opengear.com>
+cm41xx arm arm920t - -
+dkb arm arm926ejs - - Lei Wen <leiwen@marvell.com>
+jadecpu arm arm926ejs - - Matthias Weisser <weisserm@arcor.de>
+icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <wd@denx.de>
+Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23
+cpci5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+mecp5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+pf5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+PM520 powerpc mpc5xxx a258e732 2015-01-23 Josef Wagner <Wagner@Microsys.de>
+Total5200 powerpc mpc5xxx ad734f7d 2015-01-23
+CATcenter powerpc ppc4xx 5344cc1a 2015-01-23
+PPChameleonEVB powerpc ppc4xx 5344cc1a 2015-01-23 Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+P2020DS powerpc mpc85xx 168dcc6c 2015-01-23
+P2020COME powerpc mpc85xx 89123536 2015-01-23 Ira W. Snyder <iws@ovro.caltech.edu>
+P2020RDB powerpc mpc85xx 743d4815 2015-01-23 Poonam Aggrwal <poonam.aggrwal@freescale.com>
+P2010RDB powerpc mpc85xx 743d4815 2015-01-23
+P1020RDB powerpc mpc85xx 743d4815 2015-01-23
+P1011RDB powerpc mpc85xx 743d4815 2015-01-23
+MPC8360EMDS powerpc mpc83xx 8d1e3cb1 2015-01-23 Dave Liu <daveliu@freescale.com>
+MPC8360ERDK powerpc mpc83xx 8d1e3cb1 2015-01-23 Anton Vorontsov <avorontsov@ru.mvista.com>
P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk <wd@denx.de>
ZUMA powerpc 74xx_7xx d928664f 2015-01-16 Nye Liu <nyet@zumanetworks.com>
ppmc7xx powerpc 74xx_7xx d928664f 2015-01-16
diff --git a/doc/device-tree-bindings/exynos/emmc-reset.txt b/doc/device-tree-bindings/exynos/emmc-reset.txt
new file mode 100644
index 0000000..5e7ba26
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/emmc-reset.txt
@@ -0,0 +1,15 @@
+* Samsung eMMC reset
+
+Some exynos boards require special handling of nRESET_OUT line for eMMC memory
+to perform complete reboot.
+
+Required properties:
+- compatible: should be "samsung,emmc-reset"
+- reset-gpio: gpio chip for eMMC reset.
+
+Example:
+
+emmc-reset {
+ compatible = "samsung,emmc-reset";
+ reset-gpio = <&gpk1 2 0>;
+};
diff --git a/doc/device-tree-bindings/gpio/gpio.txt b/doc/device-tree-bindings/gpio/gpio.txt
index b9bd1d6..f7a158d 100644
--- a/doc/device-tree-bindings/gpio/gpio.txt
+++ b/doc/device-tree-bindings/gpio/gpio.txt
@@ -69,7 +69,8 @@ GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller.
----------------------------------
A gpio-specifier should contain a flag indicating the GPIO polarity; active-
-high or active-low. If it does, the follow best practices should be followed:
+high or active-low. If it does, the following best practices should be
+followed:
The gpio-specifier's polarity flag should represent the physical level at the
GPIO controller that achieves (or represents, for inputs) a logically asserted
@@ -147,7 +148,7 @@ contains information structures as follows:
numeric-gpio-range ::=
<pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>'
- gpio-phandle : phandle to pin controller node.
+ pinctrl-phandle : phandle to pin controller node
gpio-base : Base GPIO ID in the GPIO controller
pinctrl-base : Base pinctrl pin ID in the pin controller
count : The number of GPIOs/pins in this range
diff --git a/doc/driver-model/spi-howto.txt b/doc/driver-model/spi-howto.txt
index 5bc29ad..ee4abf4 100644
--- a/doc/driver-model/spi-howto.txt
+++ b/doc/driver-model/spi-howto.txt
@@ -40,8 +40,8 @@ with only minor changes:
Add these to your board config:
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
+CONFIG_DM_SPI
+CONFIG_DM_SPI_FLASH
2. Add the skeleton
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 128736d..dcce532 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -2,6 +2,8 @@ menu "Device Drivers"
source "drivers/core/Kconfig"
+source "drivers/demo/Kconfig"
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
@@ -48,4 +50,6 @@ source "drivers/dma/Kconfig"
source "drivers/crypto/Kconfig"
+source "drivers/thermal/Kconfig"
+
endmenu
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index d2799dc..75d182d 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -1,6 +1,48 @@
config DM
bool "Enable Driver Model"
- depends on !SPL_BUILD
help
- This config option enables Driver Model.
- To use legacy drivers, say N.
+ This config option enables Driver Model. This brings in the core
+ support, including scanning of platform data on start-up. If
+ CONFIG_OF_CONTROL is enabled, the device tree will be scanned also
+ when available.
+
+config SPL_DM
+ bool "Enable Driver Model for SPL"
+ depends on DM && SPL
+ help
+ Enable driver model in SPL. You will need to provide a
+ suitable malloc() implementation. If you are not using the
+ full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
+ consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
+ must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ In most cases driver model will only allocate a few uclasses
+ and devices in SPL, so 1KB should be enable. See
+ CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+
+config DM_WARN
+ bool "Enable warnings in driver model"
+ depends on DM
+ default y
+ help
+ The dm_warn() function can use up quite a bit of space for its
+ strings. By default this is disabled for SPL builds to save space.
+ This will cause dm_warn() to be compiled out - it will do nothing
+ when called.
+
+config DM_DEVICE_REMOVE
+ bool "Support device removal"
+ depends on DM
+ default y
+ help
+ We can save some code space by dropping support for removing a
+ device. This is not normally required in SPL, so by default this
+ option is disabled for SPL.
+
+config DM_STDIO
+ bool "Support stdio registration"
+ depends on DM
+ default y
+ help
+ Normally serial drivers register with stdio so that they can be used
+ as normal output devices. In SPL we don't normally use stdio, so
+ we can omit this feature.
diff --git a/drivers/core/device.c b/drivers/core/device.c
index b73d3b8..73c3e07 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -449,3 +449,15 @@ enum uclass_id device_get_uclass_id(struct udevice *dev)
{
return dev->uclass->uc_drv->id;
}
+
+#ifdef CONFIG_OF_CONTROL
+fdt_addr_t dev_get_addr(struct udevice *dev)
+{
+ return fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+}
+#else
+fdt_addr_t dev_get_addr(struct udevice *dev)
+{
+ return FDT_ADDR_T_NONE;
+}
+#endif
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 73e3c72..9b5c6bb 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -37,6 +37,65 @@ struct udevice *dm_root(void)
return gd->dm_root;
}
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+void fix_drivers(void)
+{
+ struct driver *drv =
+ ll_entry_start(struct driver, driver);
+ const int n_ents = ll_entry_count(struct driver, driver);
+ struct driver *entry;
+
+ for (entry = drv; entry != drv + n_ents; entry++) {
+ if (entry->of_match)
+ entry->of_match = (const struct udevice_id *)
+ ((u32)entry->of_match + gd->reloc_off);
+ if (entry->bind)
+ entry->bind += gd->reloc_off;
+ if (entry->probe)
+ entry->probe += gd->reloc_off;
+ if (entry->remove)
+ entry->remove += gd->reloc_off;
+ if (entry->unbind)
+ entry->unbind += gd->reloc_off;
+ if (entry->ofdata_to_platdata)
+ entry->ofdata_to_platdata += gd->reloc_off;
+ if (entry->child_pre_probe)
+ entry->child_pre_probe += gd->reloc_off;
+ if (entry->child_post_remove)
+ entry->child_post_remove += gd->reloc_off;
+ /* OPS are fixed in every uclass post_probe function */
+ if (entry->ops)
+ entry->ops += gd->reloc_off;
+ }
+}
+
+void fix_uclass(void)
+{
+ struct uclass_driver *uclass =
+ ll_entry_start(struct uclass_driver, uclass);
+ const int n_ents = ll_entry_count(struct uclass_driver, uclass);
+ struct uclass_driver *entry;
+
+ for (entry = uclass; entry != uclass + n_ents; entry++) {
+ if (entry->post_bind)
+ entry->post_bind += gd->reloc_off;
+ if (entry->pre_unbind)
+ entry->pre_unbind += gd->reloc_off;
+ if (entry->post_probe)
+ entry->post_probe += gd->reloc_off;
+ if (entry->pre_remove)
+ entry->pre_remove += gd->reloc_off;
+ if (entry->init)
+ entry->init += gd->reloc_off;
+ if (entry->destroy)
+ entry->destroy += gd->reloc_off;
+ /* FIXME maybe also need to fix these ops */
+ if (entry->ops)
+ entry->ops += gd->reloc_off;
+ }
+}
+#endif
+
int dm_init(void)
{
int ret;
@@ -47,6 +106,11 @@ int dm_init(void)
}
INIT_LIST_HEAD(&DM_UCLASS_ROOT_NON_CONST);
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+ fix_drivers();
+ fix_uclass();
+#endif
+
ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);
if (ret)
return ret;
diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c
index bc01075..9923bcb 100644
--- a/drivers/crypto/fsl/fsl_blob.c
+++ b/drivers/crypto/fsl/fsl_blob.c
@@ -11,7 +11,7 @@
#include "desc.h"
#include "jr.h"
-int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
+int blob_decap(u8 *key_mod, u8 *src, u8 *dst, u32 len)
{
int ret, i = 0;
u32 *desc;
@@ -36,7 +36,7 @@ int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
return ret;
}
-int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
+int blob_encap(u8 *key_mod, u8 *src, u8 *dst, u32 len)
{
int ret, i = 0;
u32 *desc;
diff --git a/drivers/crypto/fsl/fsl_hash.c b/drivers/crypto/fsl/fsl_hash.c
index d77f257..c298404 100644
--- a/drivers/crypto/fsl/fsl_hash.c
+++ b/drivers/crypto/fsl/fsl_hash.c
@@ -10,6 +10,9 @@
#include "jobdesc.h"
#include "desc.h"
#include "jr.h"
+#include "fsl_hash.h"
+#include <hw_sha.h>
+#include <asm-generic/errno.h>
#define CRYPTO_MAX_ALG_NAME 80
#define SHA1_DIGEST_SIZE 20
@@ -39,6 +42,122 @@ static struct caam_hash_template driver_hash[] = {
},
};
+static enum caam_hash_algos get_hash_type(struct hash_algo *algo)
+{
+ if (!strcmp(algo->name, driver_hash[SHA1].name))
+ return SHA1;
+ else
+ return SHA256;
+}
+
+/* Create the context for progressive hashing using h/w acceleration.
+ *
+ * @ctxp: Pointer to the pointer of the context for hashing
+ * @caam_algo: Enum for SHA1 or SHA256
+ * @return 0 if ok, -ENOMEM on error
+ */
+static int caam_hash_init(void **ctxp, enum caam_hash_algos caam_algo)
+{
+ *ctxp = calloc(1, sizeof(struct sha_ctx));
+ if (*ctxp == NULL) {
+ debug("Cannot allocate memory for context\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/*
+ * Update sg table for progressive hashing using h/w acceleration
+ *
+ * The context is freed by this function if an error occurs.
+ * We support at most 32 Scatter/Gather Entries.
+ *
+ * @hash_ctx: Pointer to the context for hashing
+ * @buf: Pointer to the buffer being hashed
+ * @size: Size of the buffer being hashed
+ * @is_last: 1 if this is the last update; 0 otherwise
+ * @caam_algo: Enum for SHA1 or SHA256
+ * @return 0 if ok, -EINVAL on error
+ */
+static int caam_hash_update(void *hash_ctx, const void *buf,
+ unsigned int size, int is_last,
+ enum caam_hash_algos caam_algo)
+{
+ uint32_t final = 0;
+ dma_addr_t addr = virt_to_phys((void *)buf);
+ struct sha_ctx *ctx = hash_ctx;
+
+ if (ctx->sg_num >= MAX_SG_32) {
+ free(ctx);
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_PHYS_64BIT
+ ctx->sg_tbl[ctx->sg_num].addr_hi = addr >> 32;
+#else
+ ctx->sg_tbl[ctx->sg_num].addr_hi = 0x0;
+#endif
+ ctx->sg_tbl[ctx->sg_num].addr_lo = addr;
+
+ sec_out32(&ctx->sg_tbl[ctx->sg_num].len_flag,
+ (size & SG_ENTRY_LENGTH_MASK));
+
+ ctx->sg_num++;
+
+ if (is_last) {
+ final = sec_in32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag) |
+ SG_ENTRY_FINAL_BIT;
+ sec_out32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag, final);
+ }
+
+ return 0;
+}
+
+/*
+ * Perform progressive hashing on the given buffer and copy hash at
+ * destination buffer
+ *
+ * The context is freed after completion of hash operation.
+ *
+ * @hash_ctx: Pointer to the context for hashing
+ * @dest_buf: Pointer to the destination buffer where hash is to be copied
+ * @size: Size of the buffer being hashed
+ * @caam_algo: Enum for SHA1 or SHA256
+ * @return 0 if ok, -EINVAL on error
+ */
+static int caam_hash_finish(void *hash_ctx, void *dest_buf,
+ int size, enum caam_hash_algos caam_algo)
+{
+ uint32_t len = 0;
+ struct sha_ctx *ctx = hash_ctx;
+ int i = 0, ret = 0;
+
+ if (size < driver_hash[caam_algo].digestsize) {
+ free(ctx);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ctx->sg_num; i++)
+ len += (sec_in32(&ctx->sg_tbl[i].len_flag) &
+ SG_ENTRY_LENGTH_MASK);
+
+ inline_cnstr_jobdesc_hash(ctx->sha_desc, (uint8_t *)ctx->sg_tbl, len,
+ ctx->hash,
+ driver_hash[caam_algo].alg_type,
+ driver_hash[caam_algo].digestsize,
+ 1);
+
+ ret = run_descriptor_jr(ctx->sha_desc);
+
+ if (ret)
+ debug("Error %x\n", ret);
+ else
+ memcpy(dest_buf, ctx->hash, sizeof(ctx->hash));
+
+ free(ctx);
+ return ret;
+}
+
int caam_hash(const unsigned char *pbuf, unsigned int buf_len,
unsigned char *pout, enum caam_hash_algos algo)
{
@@ -48,7 +167,7 @@ int caam_hash(const unsigned char *pbuf, unsigned int buf_len,
desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE);
if (!desc) {
debug("Not enough memory for descriptor allocation\n");
- return -1;
+ return -ENOMEM;
}
inline_cnstr_jobdesc_hash(desc, pbuf, buf_len, pout,
@@ -75,3 +194,20 @@ void hw_sha1(const unsigned char *pbuf, unsigned int buf_len,
if (caam_hash(pbuf, buf_len, pout, SHA1))
printf("CAAM was not setup properly or it is faulty\n");
}
+
+int hw_sha_init(struct hash_algo *algo, void **ctxp)
+{
+ return caam_hash_init(ctxp, get_hash_type(algo));
+}
+
+int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf,
+ unsigned int size, int is_last)
+{
+ return caam_hash_update(ctx, buf, size, is_last, get_hash_type(algo));
+}
+
+int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf,
+ int size)
+{
+ return caam_hash_finish(ctx, dest_buf, size, get_hash_type(algo));
+}
diff --git a/drivers/crypto/fsl/fsl_hash.h b/drivers/crypto/fsl/fsl_hash.h
new file mode 100644
index 0000000..f5be651
--- /dev/null
+++ b/drivers/crypto/fsl/fsl_hash.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef _SHA_H
+#define _SHA_H
+
+#include <fsl_sec.h>
+#include <hash.h>
+#include "jr.h"
+
+/* We support at most 32 Scatter/Gather Entries.*/
+#define MAX_SG_32 32
+
+/*
+ * Hash context contains the following fields
+ * @sha_desc: Sha Descriptor
+ * @sg_num: number of entries in sg table
+ * @len: total length of buffer
+ * @sg_tbl: sg entry table
+ * @hash: index to the hash calculated
+ */
+struct sha_ctx {
+ uint32_t sha_desc[64];
+ uint32_t sg_num;
+ uint32_t len;
+ struct sg_entry sg_tbl[MAX_SG_32];
+ u8 hash[HASH_MAX_DIGEST_SIZE];
+};
+
+#endif
diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c
index c139da6..7160da4 100644
--- a/drivers/ddr/fsl/arm_ddr_gen3.c
+++ b/drivers/ddr/fsl/arm_ddr_gen3.c
@@ -222,7 +222,7 @@ step2:
bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK)
>> SDRAM_CFG_DBW_SHIFT);
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 1;
+ (get_ddr_freq(ctrl_num) >> 20)) << 1;
total_gb_size_per_controller >>= 4; /* shift down to gb size */
debug("total %d GB\n", total_gb_size_per_controller);
debug("Need to wait up to %d * 10ms\n", timeout);
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 03d7ff1..690e73d 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -17,8 +17,6 @@
#include <fsl_immap.h>
#include <asm/io.h>
-unsigned int picos_to_mclk(unsigned int picos);
-
/*
* Determine Rtt value.
*
@@ -78,10 +76,11 @@ static inline int fsl_ddr_get_rtt(void)
* 16 for <= 2933MT/s
* 18 for higher
*/
-static inline unsigned int compute_cas_write_latency(void)
+static inline unsigned int compute_cas_write_latency(
+ const unsigned int ctrl_num)
{
unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
if (mclk_ps >= 1250)
cwl = 9;
else if (mclk_ps >= 1070)
@@ -111,10 +110,11 @@ static inline unsigned int compute_cas_write_latency(void)
* 11 if 0.935ns > tCK >= 0.833ns
* 12 if 0.833ns > tCK >= 0.75ns
*/
-static inline unsigned int compute_cas_write_latency(void)
+static inline unsigned int compute_cas_write_latency(
+ const unsigned int ctrl_num)
{
unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
if (mclk_ps >= 2500)
cwl = 5;
@@ -287,7 +287,8 @@ static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
* Avoid writing for DDR I. The new PQ38 DDR controller
* dreams up non-zero default values to be backwards compatible.
*/
-static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
+static void set_timing_cfg_0(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const dimm_params_t *dimm_params)
{
@@ -306,7 +307,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
/* Mode register set cycle time (tMRD). */
unsigned char tmrd_mclk;
#if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
#endif
#ifdef CONFIG_SYS_FSL_DDR4
@@ -314,15 +315,15 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */
trwt_mclk = 2;
twrt_mclk = 1;
- act_pd_exit_mclk = picos_to_mclk(txp);
+ act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp);
pre_pd_exit_mclk = act_pd_exit_mclk;
/*
* MRS_CYC = max(tMRD, tMOD)
* tMRD = 8nCK, tMOD = max(24nCK, 15ns)
*/
- tmrd_mclk = max(24U, picos_to_mclk(15000));
+ tmrd_mclk = max(24U, picos_to_mclk(ctrl_num, 15000));
#elif defined(CONFIG_SYS_FSL_DDR3)
- unsigned int data_rate = get_ddr_freq(0);
+ unsigned int data_rate = get_ddr_freq(ctrl_num);
int txp;
unsigned int ip_rev;
int odt_overlap;
@@ -344,7 +345,8 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
* tMRD = 4nCK (8nCK for RDIMM)
* tMOD = max(12nCK, 15ns)
*/
- tmrd_mclk = max((unsigned int)12, picos_to_mclk(15000));
+ tmrd_mclk = max((unsigned int)12,
+ picos_to_mclk(ctrl_num, 15000));
} else {
/*
* MRS_CYC = tMRD
@@ -388,7 +390,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
taxpd_mclk = 1;
} else {
/* act_pd_exit_mclk = tXARD, see above */
- act_pd_exit_mclk = picos_to_mclk(txp);
+ act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp);
/* Mode register MR0[A12] is '1' - fast exit */
pre_pd_exit_mclk = act_pd_exit_mclk;
taxpd_mclk = 1;
@@ -424,11 +426,12 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
#endif /* !defined(CONFIG_SYS_FSL_DDR1) */
/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
-static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
+static void set_timing_cfg_3(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
{
/* Extended precharge to activate interval (tRP) */
unsigned int ext_pretoact = 0;
@@ -447,18 +450,18 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
/* Control Adjust */
unsigned int cntl_adj = 0;
- ext_pretoact = picos_to_mclk(common_dimm->trp_ps) >> 4;
- ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4;
- ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4;
+ ext_pretoact = picos_to_mclk(ctrl_num, common_dimm->trp_ps) >> 4;
+ ext_acttopre = picos_to_mclk(ctrl_num, common_dimm->tras_ps) >> 4;
+ ext_acttorw = picos_to_mclk(ctrl_num, common_dimm->trcd_ps) >> 4;
ext_caslat = (2 * cas_latency - 1) >> 4;
ext_add_lat = additive_latency >> 4;
#ifdef CONFIG_SYS_FSL_DDR4
- ext_refrec = (picos_to_mclk(common_dimm->trfc1_ps) - 8) >> 4;
+ ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8) >> 4;
#else
- ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4;
+ ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8) >> 4;
/* ext_wrrec only deals with 16 clock and above, or 14 with OTF */
#endif
- ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) +
+ ext_wrrec = (picos_to_mclk(ctrl_num, common_dimm->twr_ps) +
(popts->otf_burst_chop_en ? 2 : 0)) >> 4;
ddr->timing_cfg_3 = (0
@@ -475,10 +478,11 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
}
/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
-static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
+static void set_timing_cfg_1(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency)
{
/* Precharge-to-activate interval (tRP) */
unsigned char pretoact_mclk;
@@ -510,9 +514,9 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0};
#endif
- pretoact_mclk = picos_to_mclk(common_dimm->trp_ps);
- acttopre_mclk = picos_to_mclk(common_dimm->tras_ps);
- acttorw_mclk = picos_to_mclk(common_dimm->trcd_ps);
+ pretoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trp_ps);
+ acttopre_mclk = picos_to_mclk(ctrl_num, common_dimm->tras_ps);
+ acttorw_mclk = picos_to_mclk(ctrl_num, common_dimm->trcd_ps);
/*
* Translate CAS Latency to a DDR controller field value:
@@ -547,19 +551,19 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
#endif
#ifdef CONFIG_SYS_FSL_DDR4
- refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
- acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4U);
- wrtord_mclk = max(2U, picos_to_mclk(2500));
+ refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8;
+ wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
+ acttoact_mclk = max(picos_to_mclk(ctrl_num, common_dimm->trrds_ps), 4U);
+ wrtord_mclk = max(2U, picos_to_mclk(ctrl_num, 2500));
if ((wrrec_mclk < 1) || (wrrec_mclk > 24))
printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk);
else
wrrec_mclk = wrrec_table[wrrec_mclk - 1];
#else
- refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
- acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps);
- wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps);
+ refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8;
+ wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
+ acttoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trrd_ps);
+ wrtord_mclk = picos_to_mclk(ctrl_num, common_dimm->twtr_ps);
if ((wrrec_mclk < 1) || (wrrec_mclk > 16))
printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk);
else
@@ -602,11 +606,12 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
}
/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
-static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
+static void set_timing_cfg_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
{
/* Additive latency */
unsigned char add_lat_mclk;
@@ -623,7 +628,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
/* Window for four activates (tFAW) */
unsigned short four_act;
#ifdef CONFIG_SYS_FSL_DDR3
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
#endif
/* FIXME add check that this must be less than acttorw_mclk */
@@ -641,13 +646,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
#elif defined(CONFIG_SYS_FSL_DDR2)
wr_lat = cas_latency - 1;
#else
- wr_lat = compute_cas_write_latency();
+ wr_lat = compute_cas_write_latency(ctrl_num);
#endif
#ifdef CONFIG_SYS_FSL_DDR4
- rd_to_pre = picos_to_mclk(7500);
+ rd_to_pre = picos_to_mclk(ctrl_num, 7500);
#else
- rd_to_pre = picos_to_mclk(common_dimm->trtp_ps);
+ rd_to_pre = picos_to_mclk(ctrl_num, common_dimm->trtp_ps);
#endif
/*
* JEDEC has some min requirements for tRTP
@@ -665,19 +670,20 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
wr_data_delay = popts->write_data_delay;
#ifdef CONFIG_SYS_FSL_DDR4
cpo = 0;
- cke_pls = max(3U, picos_to_mclk(5000));
+ cke_pls = max(3U, picos_to_mclk(ctrl_num, 5000));
#elif defined(CONFIG_SYS_FSL_DDR3)
/*
* cke pulse = max(3nCK, 7.5ns) for DDR3-800
* max(3nCK, 5.625ns) for DDR3-1066, 1333
* max(3nCK, 5ns) for DDR3-1600, 1866, 2133
*/
- cke_pls = max(3U, picos_to_mclk(mclk_ps > 1870 ? 7500 :
- (mclk_ps > 1245 ? 5625 : 5000)));
+ cke_pls = max(3U, picos_to_mclk(ctrl_num, mclk_ps > 1870 ? 7500 :
+ (mclk_ps > 1245 ? 5625 : 5000)));
#else
cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR;
#endif
- four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps);
+ four_act = picos_to_mclk(ctrl_num,
+ popts->tfaw_window_four_activates_ps);
ddr->timing_cfg_2 = (0
| ((add_lat_mclk & 0xf) << 28)
@@ -818,7 +824,8 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
}
/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
-static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const unsigned int unq_mrs_en)
{
@@ -865,7 +872,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
#endif
#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
- slow = get_ddr_freq(0) < 1249000000;
+ slow = get_ddr_freq(ctrl_num) < 1249000000;
#endif
if (popts->registered_dimm_en) {
@@ -915,7 +922,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
#ifdef CONFIG_SYS_FSL_DDR4
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
@@ -926,10 +934,10 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int wr_crc = 0; /* Disable */
unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
unsigned int srt = 0; /* self-refresh temerature, normal range */
- unsigned int cwl = compute_cas_write_latency() - 9;
+ unsigned int cwl = compute_cas_write_latency(ctrl_num) - 9;
unsigned int mpr = 0; /* serial */
unsigned int wc_lat;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
if (popts->rtt_override)
rtt_wr = popts->rtt_wr_override_value;
@@ -1002,7 +1010,8 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
}
#elif defined(CONFIG_SYS_FSL_DDR3)
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
@@ -1013,7 +1022,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
unsigned int srt = 0; /* self-refresh temerature, normal range */
unsigned int asr = 0; /* auto self-refresh disable */
- unsigned int cwl = compute_cas_write_latency() - 5;
+ unsigned int cwl = compute_cas_write_latency(ctrl_num) - 5;
unsigned int pasr = 0; /* partial array self refresh disable */
if (popts->rtt_override)
@@ -1077,7 +1086,8 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
#else /* for DDR2 and DDR1 */
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
@@ -1144,7 +1154,8 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
}
/* DDR SDRAM Mode configuration 10 (DDR_SDRAM_MODE_10) */
-static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_10(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
@@ -1152,7 +1163,7 @@ static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr,
int i;
unsigned short esdmode6 = 0; /* Extended SDRAM mode 6 */
unsigned short esdmode7 = 0; /* Extended SDRAM mode 7 */
- unsigned int tccdl_min = picos_to_mclk(common_dimm->tccdl_ps);
+ unsigned int tccdl_min = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps);
esdmode6 = ((tccdl_min - 4) & 0x7) << 10;
@@ -1196,14 +1207,15 @@ static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr,
#endif
/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
-static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
+static void set_ddr_sdram_interval(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
{
unsigned int refint; /* Refresh interval */
unsigned int bstopre; /* Precharge interval */
- refint = picos_to_mclk(common_dimm->refresh_rate_ps);
+ refint = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps);
bstopre = popts->bstopre;
@@ -1217,7 +1229,8 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
#ifdef CONFIG_SYS_FSL_DDR4
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
@@ -1292,7 +1305,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
* 1=fast exit DLL on (tXP)
*/
- wr_mclk = picos_to_mclk(common_dimm->twr_ps);
+ wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
if (wr_mclk <= 24) {
wr = wr_table[wr_mclk - 10];
} else {
@@ -1387,7 +1400,8 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
#elif defined(CONFIG_SYS_FSL_DDR3)
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
@@ -1466,7 +1480,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
*/
dll_on = 1;
- wr_mclk = picos_to_mclk(common_dimm->twr_ps);
+ wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
if (wr_mclk <= 16) {
wr = wr_table[wr_mclk - 5];
} else {
@@ -1582,7 +1596,8 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
#else /* !CONFIG_SYS_FSL_DDR3 */
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
@@ -1654,7 +1669,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
#if defined(CONFIG_SYS_FSL_DDR1)
wr = 0; /* Historical */
#elif defined(CONFIG_SYS_FSL_DDR2)
- wr = picos_to_mclk(common_dimm->twr_ps);
+ wr = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
#endif
dll_res = 0;
mode = 0;
@@ -1842,15 +1857,16 @@ static void set_timing_cfg_6(fsl_ddr_cfg_regs_t *ddr)
debug("FSLDDR: timing_cfg_6 = 0x%08x\n", ddr->timing_cfg_6);
}
-static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm)
+static void set_timing_cfg_7(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm)
{
unsigned int txpr, tcksre, tcksrx;
unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd;
- txpr = max(5U, picos_to_mclk(common_dimm->trfc1_ps + 10000));
- tcksre = max(5U, picos_to_mclk(10000));
- tcksrx = max(5U, picos_to_mclk(10000));
+ txpr = max(5U, picos_to_mclk(ctrl_num, common_dimm->trfc1_ps + 10000));
+ tcksre = max(5U, picos_to_mclk(ctrl_num, 10000));
+ tcksrx = max(5U, picos_to_mclk(ctrl_num, 10000));
par_lat = 0;
cs_to_cmd = 0;
@@ -1883,14 +1899,15 @@ static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr,
debug("FSLDDR: timing_cfg_7 = 0x%08x\n", ddr->timing_cfg_7);
}
-static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr,
+static void set_timing_cfg_8(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency)
{
unsigned int rwt_bg, wrt_bg, rrt_bg, wwt_bg;
unsigned int acttoact_bg, wrtord_bg, pre_all_rec;
- unsigned int tccdl = picos_to_mclk(common_dimm->tccdl_ps);
+ unsigned int tccdl = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps);
unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) +
((ddr->timing_cfg_2 & 0x00040000) >> 14);
@@ -1911,11 +1928,11 @@ static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr,
wwt_bg = tccdl - 4;
} else {
rrt_bg = tccdl - 2;
- wwt_bg = tccdl - 4;
+ wwt_bg = tccdl - 2;
}
- acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps);
- wrtord_bg = max(4U, picos_to_mclk(7500));
+ acttoact_bg = picos_to_mclk(ctrl_num, common_dimm->trrdl_ps);
+ wrtord_bg = max(4U, picos_to_mclk(ctrl_num, 7500));
if (popts->otf_burst_chop_en)
wrtord_bg += 2;
@@ -2147,7 +2164,8 @@ check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
}
unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+compute_fsl_memctl_config_regs(const unsigned int ctrl_num,
+ const memctl_options_t *popts,
fsl_ddr_cfg_regs_t *ddr,
const common_timing_params_t *common_dimm,
const dimm_params_t *dimm_params,
@@ -2319,14 +2337,14 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_SYS_FSL_DDR1)
- set_timing_cfg_0(ddr, popts, dimm_params);
+ set_timing_cfg_0(ctrl_num, ddr, popts, dimm_params);
#endif
- set_timing_cfg_3(ddr, popts, common_dimm, cas_latency,
+ set_timing_cfg_3(ctrl_num, ddr, popts, common_dimm, cas_latency,
additive_latency);
- set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
- set_timing_cfg_2(ddr, popts, common_dimm,
- cas_latency, additive_latency);
+ set_timing_cfg_1(ctrl_num, ddr, popts, common_dimm, cas_latency);
+ set_timing_cfg_2(ctrl_num, ddr, popts, common_dimm,
+ cas_latency, additive_latency);
set_ddr_cdr1(ddr, popts);
set_ddr_cdr2(ddr, popts);
@@ -2338,15 +2356,15 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
if ((ip_rev > 0x40700) && (popts->cswl_override != 0))
ddr->debug[18] = popts->cswl_override;
- set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
- set_ddr_sdram_mode(ddr, popts, common_dimm,
- cas_latency, additive_latency, unq_mrs_en);
- set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en);
+ set_ddr_sdram_cfg_2(ctrl_num, ddr, popts, unq_mrs_en);
+ set_ddr_sdram_mode(ctrl_num, ddr, popts, common_dimm,
+ cas_latency, additive_latency, unq_mrs_en);
+ set_ddr_sdram_mode_2(ctrl_num, ddr, popts, common_dimm, unq_mrs_en);
#ifdef CONFIG_SYS_FSL_DDR4
set_ddr_sdram_mode_9(ddr, popts, common_dimm, unq_mrs_en);
- set_ddr_sdram_mode_10(ddr, popts, common_dimm, unq_mrs_en);
+ set_ddr_sdram_mode_10(ctrl_num, ddr, popts, common_dimm, unq_mrs_en);
#endif
- set_ddr_sdram_interval(ddr, popts, common_dimm);
+ set_ddr_sdram_interval(ctrl_num, ddr, popts, common_dimm);
set_ddr_data_init(ddr);
set_ddr_sdram_clk_cntl(ddr, popts);
set_ddr_init_addr(ddr);
@@ -2356,8 +2374,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
#ifdef CONFIG_SYS_FSL_DDR4
set_ddr_sdram_cfg_3(ddr, popts);
set_timing_cfg_6(ddr);
- set_timing_cfg_7(ddr, common_dimm);
- set_timing_cfg_8(ddr, popts, common_dimm, cas_latency);
+ set_timing_cfg_7(ctrl_num, ddr, common_dimm);
+ set_timing_cfg_8(ctrl_num, ddr, popts, common_dimm, cas_latency);
set_timing_cfg_9(ddr);
set_ddr_dq_mapping(ddr, dimm_params);
#endif
@@ -2372,7 +2390,11 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
#ifdef CONFIG_SYS_FSL_DDR_EMU
/* disble DDR training for emulator */
ddr->debug[2] = 0x00000400;
- ddr->debug[4] = 0xff800000;
+ ddr->debug[4] = 0xff800800;
+ ddr->debug[5] = 0x08000800;
+ ddr->debug[6] = 0x08000800;
+ ddr->debug[7] = 0x08000800;
+ ddr->debug[8] = 0x08000800;
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004508
if ((ip_rev >= 0x40000) && (ip_rev < 0x40400))
diff --git a/drivers/ddr/fsl/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c
index 7df27b9..7f1c3af 100644
--- a/drivers/ddr/fsl/ddr1_dimm_params.c
+++ b/drivers/ddr/fsl/ddr1_dimm_params.c
@@ -228,10 +228,10 @@ compute_derated_DDR1_CAS_latency(unsigned int mclk_ps)
*
* FIXME: use #define for the retvals
*/
-unsigned int
-ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
+ const ddr1_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
{
unsigned int retval;
@@ -311,16 +311,16 @@ ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
& ~(1 << pdimm->caslat_x_minus_1));
/* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps());
+ pdimm->caslat_lowest_derated = compute_derated_DDR1_CAS_latency(
+ get_memory_clk_period_ps(ctrl_num));
/* Compute timing parameters */
pdimm->trcd_ps = spd->trcd * 250;
pdimm->trp_ps = spd->trp * 250;
pdimm->tras_ps = spd->tras * 1000;
- pdimm->twr_ps = mclk_to_picos(3);
- pdimm->twtr_ps = mclk_to_picos(1);
+ pdimm->twr_ps = mclk_to_picos(ctrl_num, 3);
+ pdimm->twtr_ps = mclk_to_picos(ctrl_num, 1);
pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc);
pdimm->trrd_ps = spd->trrd * 250;
@@ -335,7 +335,7 @@ ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
pdimm->tdh_ps
= convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
- pdimm->trtp_ps = mclk_to_picos(2); /* By the book. */
+ pdimm->trtp_ps = mclk_to_picos(ctrl_num, 2); /* By the book. */
pdimm->tdqsq_max_ps = spd->tdqsq * 10;
pdimm->tqhs_ps = spd->tqhs * 10;
diff --git a/drivers/ddr/fsl/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c
index d865df7..49cc1a0 100644
--- a/drivers/ddr/fsl/ddr2_dimm_params.c
+++ b/drivers/ddr/fsl/ddr2_dimm_params.c
@@ -211,10 +211,10 @@ compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)
*
* FIXME: use #define for the retvals
*/
-unsigned int
-ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
+ const ddr2_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
{
unsigned int retval;
@@ -310,8 +310,8 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
& ~(1 << pdimm->caslat_x_minus_1));
/* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps());
+ pdimm->caslat_lowest_derated = compute_derated_DDR2_CAS_latency(
+ get_memory_clk_period_ps(ctrl_num));
/* Compute timing parameters */
pdimm->trcd_ps = spd->trcd * 250;
diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c
index a4b8c10..6917715 100644
--- a/drivers/ddr/fsl/ddr3_dimm_params.c
+++ b/drivers/ddr/fsl/ddr3_dimm_params.c
@@ -83,10 +83,10 @@ compute_ranksize(const ddr3_spd_eeprom_t *spd)
* Writes the results to the dimm_params_t structure pointed by pdimm.
*
*/
-unsigned int
-ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
+ const ddr3_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
{
unsigned int retval;
unsigned int mtb_ps;
diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c
index aaddc8f..bbfb4ee 100644
--- a/drivers/ddr/fsl/ddr4_dimm_params.c
+++ b/drivers/ddr/fsl/ddr4_dimm_params.c
@@ -119,10 +119,10 @@ compute_ranksize(const struct ddr4_spd_eeprom_s *spd)
* Writes the results to the dimm_params_t structure pointed by pdimm.
*
*/
-unsigned int
-ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
+ const generic_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
{
unsigned int retval;
int i;
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index 4eef047..d9fce7d 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -32,24 +32,44 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
u32 temp_sdram_cfg;
u32 total_gb_size_per_controller;
int timeout;
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+ u32 *eddrtqcr1;
+#endif
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+ eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
+#endif
break;
#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+ eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
+#endif
break;
#endif
#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+ eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
+#endif
break;
#endif
#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+ eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR4_ADDR + 0x800;
+#endif
break;
#endif
default:
@@ -60,6 +80,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
if (step == 2)
goto step2;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008336
+#ifdef CONFIG_LS2085A
+ /* A008336 only applies to general DDR controllers */
+ if ((ctrl_num == 0) || (ctrl_num == 1))
+#endif
+ ddr_out32(eddrtqcr1, 0x63b30002);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008514
+#ifdef CONFIG_LS2085A
+ /* A008514 only applies to DP-DDR controler */
+ if (ctrl_num == 2)
+#endif
+ ddr_out32(eddrtqcr1, 0x63b20002);
+#endif
if (regs->ddr_eor)
ddr_out32(&ddr->eor, regs->ddr_eor);
@@ -253,7 +287,7 @@ step2:
bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK)
>> SDRAM_CFG_DBW_SHIFT);
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 2;
+ (get_ddr_freq(ctrl_num) >> 20)) << 2;
total_gb_size_per_controller >>= 4; /* shift down to gb size */
debug("total %d GB\n", total_gb_size_per_controller);
debug("Need to wait up to %d * 10ms\n", timeout);
diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c
index 73db444..b295344 100644
--- a/drivers/ddr/fsl/lc_common_dimm_params.c
+++ b/drivers/ddr/fsl/lc_common_dimm_params.c
@@ -13,7 +13,8 @@
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
static unsigned int
-compute_cas_latency(const dimm_params_t *dimm_params,
+compute_cas_latency(const unsigned int ctrl_num,
+ const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
unsigned int number_of_dimms)
{
@@ -22,7 +23,7 @@ compute_cas_latency(const dimm_params_t *dimm_params,
unsigned int caslat_actual;
unsigned int retry = 16;
unsigned int tmp;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
#ifdef CONFIG_SYS_FSL_DDR3
const unsigned int taamax = 20000;
#else
@@ -72,12 +73,13 @@ compute_cas_latency(const dimm_params_t *dimm_params,
}
#else /* for DDR1 and DDR2 */
static unsigned int
-compute_cas_latency(const dimm_params_t *dimm_params,
+compute_cas_latency(const unsigned int ctrl_num,
+ const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
unsigned int number_of_dimms)
{
int i;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
unsigned int lowest_good_caslat;
unsigned int not_ok;
unsigned int temp1, temp2;
@@ -212,7 +214,8 @@ compute_cas_latency(const dimm_params_t *dimm_params,
* by dimm_params.
*/
unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
+compute_lowest_common_dimm_parameters(const unsigned int ctrl_num,
+ const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
const unsigned int number_of_dimms)
{
@@ -442,7 +445,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
printf("ERROR: Mix different RDIMM detected!\n");
/* calculate cas latency for all DDR types */
- if (compute_cas_latency(dimm_params, outpdimm, number_of_dimms))
+ if (compute_cas_latency(ctrl_num, dimm_params,
+ outpdimm, number_of_dimms))
return 1;
/* Determine if all DIMMs ECC capable. */
@@ -518,11 +522,12 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
#if defined(CONFIG_SYS_FSL_DDR2)
if ((outpdimm->lowest_common_spd_caslat < 4) &&
- (picos_to_mclk(trcd_ps) > outpdimm->lowest_common_spd_caslat)) {
- additive_latency = picos_to_mclk(trcd_ps) -
+ (picos_to_mclk(ctrl_num, trcd_ps) >
+ outpdimm->lowest_common_spd_caslat)) {
+ additive_latency = picos_to_mclk(ctrl_num, trcd_ps) -
outpdimm->lowest_common_spd_caslat;
- if (mclk_to_picos(additive_latency) > trcd_ps) {
- additive_latency = picos_to_mclk(trcd_ps);
+ if (mclk_to_picos(ctrl_num, additive_latency) > trcd_ps) {
+ additive_latency = picos_to_mclk(ctrl_num, trcd_ps);
debug("setting additive_latency to %u because it was "
" greater than tRCD_ps\n", additive_latency);
}
@@ -534,7 +539,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
*
* AL <= tRCD(min)
*/
- if (mclk_to_picos(additive_latency) > trcd_ps) {
+ if (mclk_to_picos(ctrl_num, additive_latency) > trcd_ps) {
printf("Error: invalid additive latency exceeds tRCD(min).\n");
return 1;
}
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index 6f291eb..b72b242 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -450,7 +450,8 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
&(pinfo->spd_installed_dimms[i][j]);
dimm_params_t *pdimm =
&(pinfo->dimm_params[i][j]);
- retval = compute_dimm_parameters(spd, pdimm, i);
+ retval = compute_dimm_parameters(
+ i, spd, pdimm, j);
#ifdef CONFIG_SYS_DDR_RAW_TIMING
if (!i && !j && retval) {
printf("SPD error on controller %d! "
@@ -507,10 +508,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
for (i = first_ctrl; i <= last_ctrl; i++) {
debug("Computing lowest common DIMM"
" parameters for memctl=%u\n", i);
- compute_lowest_common_dimm_parameters(
- pinfo->dimm_params[i],
- &timing_params[i],
- CONFIG_DIMM_SLOTS_PER_CTLR);
+ compute_lowest_common_dimm_parameters
+ (i,
+ pinfo->dimm_params[i],
+ &timing_params[i],
+ CONFIG_DIMM_SLOTS_PER_CTLR);
}
case STEP_GATHER_OPTS:
@@ -562,12 +564,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
continue;
}
- compute_fsl_memctl_config_regs(
- &pinfo->memctl_opts[i],
- &ddr_reg[i], &timing_params[i],
- pinfo->dimm_params[i],
- dbw_capacity_adjust[i],
- size_only);
+ compute_fsl_memctl_config_regs
+ (i,
+ &pinfo->memctl_opts[i],
+ &ddr_reg[i], &timing_params[i],
+ pinfo->dimm_params[i],
+ dbw_capacity_adjust[i],
+ size_only);
}
default:
@@ -689,6 +692,10 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo)
}
}
+#ifdef CONFIG_FSL_DDR_SYNC_REFRESH
+ fsl_ddr_sync_memctl_refresh(first_ctrl, last_ctrl);
+#endif
+
#ifdef CONFIG_PPC
/* program LAWs */
for (i = first_ctrl; i <= last_ctrl; i++) {
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
index 8f4d01a..6752d4d 100644
--- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
@@ -426,7 +426,7 @@ step2:
bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
>> SDRAM_CFG_DBW_SHIFT);
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 1;
+ (get_ddr_freq(ctrl_num) >> 20)) << 1;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
timeout_save = timeout;
#endif
@@ -538,12 +538,14 @@ step2:
case 1:
out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
break;
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 2
case 2:
out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
break;
case 3:
out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
break;
+#endif
}
clrbits_be32(&ddr->sdram_cfg, 0x2);
}
diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
index 6d098d1..5beb11b 100644
--- a/drivers/ddr/fsl/options.c
+++ b/drivers/ddr/fsl/options.c
@@ -732,7 +732,7 @@ unsigned int populate_memctl_options(int all_dimms_registered,
#endif
/* Global Timing Parameters. */
- debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
+ debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(ctrl_num));
/* Pick a caslat override. */
popts->cas_latency_override = 0;
@@ -785,7 +785,7 @@ unsigned int populate_memctl_options(int all_dimms_registered,
* FIXME: width, was considering looking at pdimm->primary_sdram_width
*/
#if defined(CONFIG_SYS_FSL_DDR1)
- popts->tfaw_window_four_activates_ps = mclk_to_picos(1);
+ popts->tfaw_window_four_activates_ps = mclk_to_picos(ctrl_num, 1);
#elif defined(CONFIG_SYS_FSL_DDR2)
/*
@@ -1036,7 +1036,7 @@ done:
if (pdimm[0].n_ranks == 4)
popts->quad_rank_present = 1;
- ddr_freq = get_ddr_freq(0) / 1000000;
+ ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
if (popts->registered_dimm_en) {
popts->rcw_override = 1;
popts->rcw_1 = 0x000a5a00;
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c
index 58b519b..664081b 100644
--- a/drivers/ddr/fsl/util.c
+++ b/drivers/ddr/fsl/util.c
@@ -43,9 +43,9 @@ u32 fsl_ddr_get_version(void)
* propagation, compute a suitably rounded mclk_ps to compute
* a working memory controller configuration.
*/
-unsigned int get_memory_clk_period_ps(void)
+unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num)
{
- unsigned int data_rate = get_ddr_freq(0);
+ unsigned int data_rate = get_ddr_freq(ctrl_num);
unsigned int result;
/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
@@ -59,10 +59,10 @@ unsigned int get_memory_clk_period_ps(void)
}
/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
-unsigned int picos_to_mclk(unsigned int picos)
+unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos)
{
unsigned long long clks, clks_rem;
- unsigned long data_rate = get_ddr_freq(0);
+ unsigned long data_rate = get_ddr_freq(ctrl_num);
/* Short circuit for zero picos */
if (!picos)
@@ -88,9 +88,9 @@ unsigned int picos_to_mclk(unsigned int picos)
return (unsigned int) clks;
}
-unsigned int mclk_to_picos(unsigned int mclk)
+unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk)
{
- return get_memory_clk_period_ps() * mclk;
+ return get_memory_clk_period_ps(ctrl_num) * mclk;
}
#ifdef CONFIG_PPC
@@ -308,3 +308,58 @@ void board_add_ram_info(int use_default)
{
detail_board_ddr_info();
}
+
+#ifdef CONFIG_FSL_DDR_SYNC_REFRESH
+#define DDRC_DEBUG20_INIT_DONE 0x80000000
+#define DDRC_DEBUG2_RF 0x00000040
+void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
+ unsigned int last_ctrl)
+{
+ unsigned int i;
+ u32 ddrc_debug20;
+ u32 ddrc_debug2[CONFIG_NUM_DDR_CONTROLLERS] = {};
+ u32 *ddrc_debug2_p[CONFIG_NUM_DDR_CONTROLLERS] = {};
+ struct ccsr_ddr __iomem *ddr;
+
+ for (i = first_ctrl; i <= last_ctrl; i++) {
+ switch (i) {
+ case 0:
+ ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+ break;
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ case 1:
+ ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+ break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+ case 2:
+ ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+ break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+ case 3:
+ ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+ break;
+#endif
+ default:
+ printf("%s unexpected ctrl = %u\n", __func__, i);
+ return;
+ }
+ ddrc_debug20 = ddr_in32(&ddr->debug[19]);
+ ddrc_debug2_p[i] = &ddr->debug[1];
+ while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) {
+ /* keep polling until DDRC init is done */
+ udelay(100);
+ ddrc_debug20 = ddr_in32(&ddr->debug[19]);
+ }
+ ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF;
+ }
+ /*
+ * Sync refresh
+ * This is put together to make sure the refresh reqeusts are sent
+ * closely to each other.
+ */
+ for (i = first_ctrl; i <= last_ctrl; i++)
+ ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
+}
+#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */
diff --git a/drivers/demo/Kconfig b/drivers/demo/Kconfig
new file mode 100644
index 0000000..7a8ce18
--- /dev/null
+++ b/drivers/demo/Kconfig
@@ -0,0 +1,26 @@
+config DM_DEMO
+ bool "Enable demo uclass support"
+ depends on DM
+ help
+ This uclass allows you to play around with driver model. It provides
+ an interface to a couple of demo devices. You can access it using
+ the 'demo' command or by calling the uclass functions from your
+ own code.
+
+config DM_DEMO_SIMPLE
+ bool "Enable simple demo device for driver model"
+ depends on DM_DEMO
+ help
+ This device allows you to play around with driver model. It prints
+ a message when the 'demo hello' command is executed which targets
+ this device. It can be used to help understand how driver model
+ works.
+
+config DM_DEMO_SHAPE
+ bool "Enable shape demo device for driver model"
+ depends on DM_DEMO
+ help
+ This device allows you to play around with driver model. It prints
+ a shape when the 'demo hello' command is executed which targets
+ this device. It can be used to help understand how driver model
+ works.
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d21302f..b609e73 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -2,5 +2,8 @@ config DM_GPIO
bool "Enable Driver Model for GPIO drivers"
depends on DM
help
- If you want to use driver model for GPIO drivers, say Y.
- To use legacy GPIO drivers, say N.
+ Enable driver model for GPIO access. The standard GPIO
+ interface (gpio_get_value(), etc.) is then implemented by
+ the GPIO uclass. Drivers provide methods to query the
+ particular GPIOs that they provide. The uclass interface
+ is defined in include/asm-generic/gpio.h.
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index 6129c02..22fbd63 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -451,7 +451,7 @@ struct at91_port_priv {
/* set GPIO pin 'gpio' as an input */
static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
at91_set_port_input(port->regs, offset, 0);
@@ -462,7 +462,7 @@ static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
at91_set_port_output(port->regs, offset, value);
@@ -472,7 +472,7 @@ static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
/* read GPIO IN value of pin 'gpio' */
static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
return at91_get_port_value(port->regs, offset);
}
@@ -481,7 +481,7 @@ static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
at91_set_port_value(port->regs, offset, value);
@@ -490,7 +490,7 @@ static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
/* GPIOF_FUNC is not implemented yet */
if (at91_get_port_output(port->regs, offset))
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 8bb9e39..815407b 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -23,6 +23,7 @@ enum mxc_gpio_direction {
#define GPIO_PER_BANK 32
struct mxc_gpio_plat {
+ int bank_index;
struct gpio_regs *regs;
};
@@ -150,6 +151,9 @@ int gpio_direction_output(unsigned gpio, int value)
#endif
#ifdef CONFIG_DM_GPIO
+#include <fdtdec.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static int mxc_gpio_is_output(struct gpio_regs *regs, int offset)
{
u32 val;
@@ -258,23 +262,6 @@ static const struct dm_gpio_ops gpio_mxc_ops = {
.get_function = mxc_gpio_get_function,
};
-static const struct mxc_gpio_plat mxc_plat[] = {
- { (struct gpio_regs *)GPIO1_BASE_ADDR },
- { (struct gpio_regs *)GPIO2_BASE_ADDR },
- { (struct gpio_regs *)GPIO3_BASE_ADDR },
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
- defined(CONFIG_MX53) || defined(CONFIG_MX6)
- { (struct gpio_regs *)GPIO4_BASE_ADDR },
-#endif
-#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
- { (struct gpio_regs *)GPIO5_BASE_ADDR },
- { (struct gpio_regs *)GPIO6_BASE_ADDR },
-#endif
-#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
- { (struct gpio_regs *)GPIO7_BASE_ADDR },
-#endif
-};
-
static int mxc_gpio_probe(struct udevice *dev)
{
struct mxc_bank_info *bank = dev_get_priv(dev);
@@ -283,7 +270,7 @@ static int mxc_gpio_probe(struct udevice *dev)
int banknum;
char name[18], *str;
- banknum = plat - mxc_plat;
+ banknum = plat->bank_index;
sprintf(name, "GPIO%d_", banknum + 1);
str = strdup(name);
if (!str)
@@ -295,12 +282,72 @@ static int mxc_gpio_probe(struct udevice *dev)
return 0;
}
+static int mxc_gpio_bind(struct udevice *dev)
+{
+ struct mxc_gpio_plat *plat = dev->platdata;
+ fdt_addr_t addr;
+
+ /*
+ * If platdata already exsits, directly return.
+ * Actually only when DT is not supported, platdata
+ * is statically initialized in U_BOOT_DEVICES.Here
+ * will return.
+ */
+ if (plat)
+ return 0;
+
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ /*
+ * TODO:
+ * When every board is converted to driver model and DT is supported,
+ * this can be done by auto-alloc feature, but not using calloc
+ * to alloc memory for platdata.
+ */
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+
+ plat->regs = (struct gpio_regs *)addr;
+ plat->bank_index = dev->req_seq;
+ dev->platdata = plat;
+
+ return 0;
+}
+
+static const struct udevice_id mxc_gpio_ids[] = {
+ { .compatible = "fsl,imx35-gpio" },
+ { }
+};
+
U_BOOT_DRIVER(gpio_mxc) = {
.name = "gpio_mxc",
.id = UCLASS_GPIO,
.ops = &gpio_mxc_ops,
.probe = mxc_gpio_probe,
.priv_auto_alloc_size = sizeof(struct mxc_bank_info),
+ .of_match = mxc_gpio_ids,
+ .bind = mxc_gpio_bind,
+};
+
+#ifndef CONFIG_OF_CONTROL
+static const struct mxc_gpio_plat mxc_plat[] = {
+ { 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
+ { 1, (struct gpio_regs *)GPIO2_BASE_ADDR },
+ { 2, (struct gpio_regs *)GPIO3_BASE_ADDR },
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+ defined(CONFIG_MX53) || defined(CONFIG_MX6)
+ { 3, (struct gpio_regs *)GPIO4_BASE_ADDR },
+#endif
+#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
+ { 4, (struct gpio_regs *)GPIO5_BASE_ADDR },
+ { 5, (struct gpio_regs *)GPIO6_BASE_ADDR },
+#endif
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
+ { 6, (struct gpio_regs *)GPIO7_BASE_ADDR },
+#endif
};
U_BOOT_DEVICES(mxc_gpios) = {
@@ -320,3 +367,4 @@ U_BOOT_DEVICES(mxc_gpios) = {
#endif
};
#endif
+#endif
diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
index f3a7ccb..19fc451 100644
--- a/drivers/gpio/omap_gpio.c
+++ b/drivers/gpio/omap_gpio.c
@@ -291,7 +291,7 @@ static int omap_gpio_get_function(struct udevice *dev, unsigned offset)
struct gpio_bank *bank = dev_get_priv(dev);
/* GPIOF_FUNC is not implemented yet */
- if (_get_gpio_direction(bank->base, offset) == OMAP_GPIO_DIR_OUT)
+ if (_get_gpio_direction(bank, offset) == OMAP_GPIO_DIR_OUT)
return GPIOF_OUTPUT;
else
return GPIOF_INPUT;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 202ea5d..692810d 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -2,8 +2,25 @@ config DM_I2C
bool "Enable Driver Model for I2C drivers"
depends on DM
help
- If you want to use driver model for I2C drivers, say Y.
- To use legacy I2C drivers, say N.
+ Enable driver model for I2C. This SPI flash interface
+ (spi_flash_probe(), spi_flash_write(), etc.) is then
+ implemented by the SPI flash uclass. There is one standard
+ SPI flash driver which knows how to probe most chips
+ supported by U-Boot. The uclass interface is defined in
+ include/spi_flash.h, but is currently fully compatible
+ with the old interface to avoid confusion and duplication
+ during the transition parent. SPI and SPI flash must be
+ enabled together (it is not possible to use driver model
+ for one and not the other).
+
+config DM_I2C_COMPAT
+ bool "Enable I2C compatibility layer"
+ depends on DM
+ help
+ Enable old-style I2C functions for compatibility with existing code.
+ This option can be enabled as a temporary measure to avoid needing
+ to convert all code for a board in a single commit. It should not
+ be enabled for any board in an official release.
config SYS_I2C_UNIPHIER
bool "UniPhier I2C driver"
diff --git a/drivers/i2c/adi_i2c.c b/drivers/i2c/adi_i2c.c
index 20495b1..c58f14a 100644
--- a/drivers/i2c/adi_i2c.c
+++ b/drivers/i2c/adi_i2c.c
@@ -63,7 +63,7 @@ struct twi_regs {
#endif
/* All transfers are described by this data structure */
-struct i2c_msg {
+struct adi_i2c_msg {
u8 flags;
#define I2C_M_COMBO 0x4
#define I2C_M_STOP 0x2
@@ -81,7 +81,7 @@ struct i2c_msg {
* wait_for_completion - manage the actual i2c transfer
* @msg: the i2c msg
*/
-static int wait_for_completion(struct twi_regs *twi, struct i2c_msg *msg)
+static int wait_for_completion(struct twi_regs *twi, struct adi_i2c_msg *msg)
{
u16 int_stat, ctl;
ulong timebase = get_timer(0);
@@ -151,7 +151,7 @@ static int i2c_transfer(struct i2c_adapter *adap, uint8_t chip, uint addr,
(addr >> 8),
(addr >> 16),
};
- struct i2c_msg msg = {
+ struct adi_i2c_msg msg = {
.flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
.buf = buffer,
.len = len,
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index eafa457..a6991bf 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -325,7 +325,7 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
return ret;
}
-int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
{
struct dm_i2c_ops *ops = i2c_get_ops(bus);
struct dm_i2c_bus *i2c = bus->uclass_priv;
@@ -346,12 +346,7 @@ int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
return 0;
}
-/*
- * i2c_get_bus_speed:
- *
- * Returns speed of selected I2C bus in Hz
- */
-int i2c_get_bus_speed(struct udevice *bus)
+int dm_i2c_get_bus_speed(struct udevice *bus)
{
struct dm_i2c_ops *ops = i2c_get_ops(bus);
struct dm_i2c_bus *i2c = bus->uclass_priv;
@@ -440,7 +435,7 @@ static int i2c_post_probe(struct udevice *dev)
i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
"clock-frequency", 100000);
- return i2c_set_bus_speed(dev, i2c->speed_hz);
+ return dm_i2c_set_bus_speed(dev, i2c->speed_hz);
}
static int i2c_post_bind(struct udevice *dev)
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
index 5eab338..9af496b 100644
--- a/drivers/i2c/kona_i2c.c
+++ b/drivers/i2c/kona_i2c.c
@@ -156,7 +156,7 @@ static struct bcm_kona_i2c_dev g_i2c_devs[CONFIG_SYS_MAX_I2C_BUS] = {
#define I2C_M_RD 0x0001 /* read data */
#define I2C_M_NOSTART 0x4000 /* no restart between msgs */
-struct i2c_msg {
+struct kona_i2c_msg {
uint16_t addr;
uint16_t flags;
uint16_t len;
@@ -297,7 +297,7 @@ static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
/* Read any amount of data using the RX FIFO from the i2c bus */
static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg *msg)
+ struct kona_i2c_msg *msg)
{
unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
unsigned int last_byte_nak = 0;
@@ -392,7 +392,7 @@ static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
/* Write any amount of data using TX FIFO to the i2c bus */
static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg *msg)
+ struct kona_i2c_msg *msg)
{
unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
unsigned int bytes_written = 0;
@@ -418,7 +418,7 @@ static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
/* Send i2c address */
static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg *msg)
+ struct kona_i2c_msg *msg)
{
unsigned char addr;
@@ -480,9 +480,9 @@ static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
/* Master transfer function */
static int bcm_kona_i2c_xfer(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg msgs[], int num)
+ struct kona_i2c_msg msgs[], int num)
{
- struct i2c_msg *pmsg;
+ struct kona_i2c_msg *pmsg;
int rc = 0;
int i;
@@ -635,7 +635,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)
{
/* msg[0] writes the addr, msg[1] reads the data */
- struct i2c_msg msg[2];
+ struct kona_i2c_msg msg[2];
unsigned char msgbuf0[64];
struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
@@ -663,7 +663,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)
{
- struct i2c_msg msg[1];
+ struct kona_i2c_msg msg[1];
unsigned char msgbuf0[64];
unsigned int i;
struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c
index dac3463..e65cce0 100644
--- a/drivers/i2c/mv_i2c.c
+++ b/drivers/i2c/mv_i2c.c
@@ -31,7 +31,7 @@
#endif
/* All transfers are described by this data structure */
-struct i2c_msg {
+struct mv_i2c_msg {
u8 condition;
u8 acknack;
u8 direction;
@@ -157,7 +157,7 @@ static int i2c_isr_set_cleared(unsigned long set_mask,
* -5: illegal parameters
* -6: bus is busy and couldn't be aquired
*/
-int i2c_transfer(struct i2c_msg *msg)
+int i2c_transfer(struct mv_i2c_msg *msg)
{
int ret;
@@ -286,7 +286,7 @@ void i2c_init(int speed, int slaveaddr)
*/
int i2c_probe(uchar chip)
{
- struct i2c_msg msg;
+ struct mv_i2c_msg msg;
i2c_reset();
@@ -322,7 +322,7 @@ int i2c_probe(uchar chip)
*/
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- struct i2c_msg msg;
+ struct mv_i2c_msg msg;
u8 addr_bytes[3]; /* lowest...highest byte of data address */
PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
@@ -410,7 +410,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
*/
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- struct i2c_msg msg;
+ struct mv_i2c_msg msg;
u8 addr_bytes[3]; /* lowest...highest byte of data address */
PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 0dd1abc..b4ee33f 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -112,9 +112,9 @@
#define I2C_START_STOP 0x20 /* START / STOP */
#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
-#define I2C_TIMEOUT_MS 1000 /* 1 second */
+#define I2C_TIMEOUT_MS 10 /* 10 ms */
-#define HSI2C_TIMEOUT_US 100000 /* 100 ms, finer granularity */
+#define HSI2C_TIMEOUT_US 10000 /* 10 ms, finer granularity */
/* To support VCMA9 boards and other who dont define max_i2c_num */
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index e69de29..bb00de7 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -0,0 +1,6 @@
+config CROS_EC_KEYB
+ bool "Enable Chrome OS EC keyboard support"
+ help
+ Most ARM Chromebooks use an EC to provide access to the keyboard.
+ Messages are used to request key scans from the EC and these are
+ then decoded into keys by this driver.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index e69de29..0df25c3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -0,0 +1,55 @@
+config CMD_CROS_EC
+ bool "Enable crosec command"
+ depends on CROS_EC
+ help
+ Enable command-line access to the Chrome OS EC (Embedded
+ Controller). This provides the 'crosec' command which has
+ a number of sub-commands for performing EC tasks such as
+ updating its flash, accessing a small saved context area
+ and talking to the I2C bus behind the EC (if there is one).
+
+config CROS_EC
+ bool "Enable Chrome OS EC"
+ help
+ Enable access to the Chrome OS EC. This is a separate
+ microcontroller typically available on a SPI bus on Chromebooks. It
+ provides access to the keyboard, some internal storage and may
+ control access to the battery and main PMIC depending on the
+ device. You can use the 'crosec' command to access it.
+
+config CROS_EC_I2C
+ bool "Enable Chrome OS EC I2C driver"
+ depends on CROS_EC
+ help
+ Enable I2C access to the Chrome OS EC. This is used on older
+ ARM Chromebooks such as snow and spring before the standard bus
+ changed to SPI. The EC will accept commands across the I2C using
+ a special message protocol, and provide responses.
+
+config CROS_EC_LPC
+ bool "Enable Chrome OS EC LPC driver"
+ depends on CROS_EC
+ help
+ Enable I2C access to the Chrome OS EC. This is used on x86
+ Chromebooks such as link and falco. The keyboard is provided
+ through a legacy port interface, so on x86 machines the main
+ function of the EC is power and thermal management.
+
+config CROS_EC_SPI
+ bool "Enable Chrome OS EC SPI driver"
+ depends on CROS_EC
+ help
+ Enable SPI access to the Chrome OS EC. This is used on newer
+ ARM Chromebooks such as pit, pi and nyan-big. The SPI interface
+ provides a faster and more robust interface than I2C but the bugs
+ are less interesting.
+
+config DM_CROS_EC
+ bool "Enable Driver Model for Chrome OS EC"
+ depends on DM
+ help
+ Enable driver model for the Chrome OS EC interface. This
+ allows the cros_ec SPI driver to operate with CONFIG_DM_SPI
+ but otherwise makes few changes. Since cros_ec also supports
+ LPC (which doesn't support driver model yet), a full
+ conversion is not yet possible.
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index b18c75d..76fa0b0 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -321,7 +321,7 @@ static void dwmci_set_ios(struct mmc *mmc)
if (mmc->ddr_mode)
regs |= DWMCI_DDR_MODE;
else
- regs &= DWMCI_DDR_MODE;
+ regs &= ~DWMCI_DDR_MODE;
dwmci_writel(host, DWMCI_UHS_REG, regs);
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index dfa209b..e083745 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -13,14 +13,20 @@
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
#include <asm/gpio.h>
#include <asm-generic/errno.h>
#define DWMMC_MAX_CH_NUM 4
#define DWMMC_MAX_FREQ 52000000
#define DWMMC_MIN_FREQ 400000
-#define DWMMC_MMC0_CLKSEL_VAL 0x03030001
-#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
+#define DWMMC_MMC0_SDR_TIMING_VAL 0x03030001
+#define DWMMC_MMC2_SDR_TIMING_VAL 0x03020001
+
+/* Exynos implmentation specific drver private data */
+struct dwmci_exynos_priv_data {
+ u32 sdr_timing;
+};
/*
* Function used as callback function to initialise the
@@ -28,7 +34,9 @@
*/
static void exynos_dwmci_clksel(struct dwmci_host *host)
{
- dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+ struct dwmci_exynos_priv_data *priv = host->priv;
+
+ dwmci_writel(host, DWMCI_CLKSEL, priv->sdr_timing);
}
unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
@@ -55,6 +63,8 @@ unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
static void exynos_dwmci_board_init(struct dwmci_host *host)
{
+ struct dwmci_exynos_priv_data *priv = host->priv;
+
if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
dwmci_writel(host, EMMCP_SEND0, 0);
@@ -64,12 +74,17 @@ static void exynos_dwmci_board_init(struct dwmci_host *host)
MPSCTRL_NON_SECURE_READ_BIT |
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
}
+
+ /* Set to timing value at initial time */
+ if (priv->sdr_timing)
+ exynos_dwmci_clksel(host);
}
static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
{
unsigned int div;
unsigned long freq, sclk;
+ struct dwmci_exynos_priv_data *priv = host->priv;
if (host->bus_hz)
freq = host->bus_hz;
@@ -88,11 +103,11 @@ static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
#endif
host->board_init = exynos_dwmci_board_init;
- if (!host->clksel_val) {
+ if (!priv->sdr_timing) {
if (index == 0)
- host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+ priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
else if (index == 2)
- host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+ priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
}
host->caps = MMC_MODE_DDR_52MHz;
@@ -118,6 +133,7 @@ static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
{
struct dwmci_host *host = NULL;
+ struct dwmci_exynos_priv_data *priv;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
@@ -125,11 +141,19 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
return -ENOMEM;
}
+ priv = malloc(sizeof(struct dwmci_exynos_priv_data));
+ if (!priv) {
+ error("dwmci_exynos_priv_data malloc fail!\n");
+ return -ENOMEM;
+ }
+
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
if (clksel)
- host->clksel_val = clksel;
+ priv->sdr_timing = clksel;
+
+ host->priv = priv;
return exynos_dwmci_core_init(host, index);
}
@@ -157,7 +181,14 @@ static int exynos_dwmci_get_config(const void *blob, int node,
struct dwmci_host *host)
{
int err = 0;
- u32 base, clksel_val, timing[3];
+ u32 base, timing[3];
+ struct dwmci_exynos_priv_data *priv;
+
+ priv = malloc(sizeof(struct dwmci_exynos_priv_data));
+ if (!priv) {
+ error("dwmci_exynos_priv_data malloc fail!\n");
+ return -ENOMEM;
+ }
/* Extract device id for each mmc channel */
host->dev_id = pinmux_decode_periph_id(blob, node);
@@ -166,7 +197,6 @@ static int exynos_dwmci_get_config(const void *blob, int node,
if (host->dev_index == host->dev_id)
host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
-
/* Get the bus width from the device node */
host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (host->buswidth <= 0) {
@@ -190,16 +220,24 @@ static int exynos_dwmci_get_config(const void *blob, int node,
return -EINVAL;
}
- clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
DWMCI_SET_DRV_CLK(timing[1]) |
DWMCI_SET_DIV_RATIO(timing[2]));
- if (clksel_val)
- host->clksel_val = clksel_val;
+
+ /* sdr_timing didn't assigned anything, use the default value */
+ if (!priv->sdr_timing) {
+ if (host->dev_index == 0)
+ priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
+ else if (host->dev_index == 2)
+ priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
+ }
host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
host->div = fdtdec_get_int(blob, node, "div", 0);
+ host->priv = priv;
+
return 0;
}
@@ -229,12 +267,21 @@ int exynos_dwmmc_init(const void *blob)
{
int compat_id;
int node_list[DWMMC_MAX_CH_NUM];
+ int boot_dev_node;
int err = 0, count;
compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC;
count = fdtdec_find_aliases_for_id(blob, "mmc",
compat_id, node_list, DWMMC_MAX_CH_NUM);
+
+ /* For DWMMC always set boot device as mmc 0 */
+ if (count >= 3 && get_boot_mode() == BOOT_MODE_SD) {
+ boot_dev_node = node_list[2];
+ node_list[2] = node_list[0];
+ node_list[0] = boot_dev_node;
+ }
+
err = exynos_dwmci_process_node(blob, node_list, count);
return err;
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 67ee179..c5e270d 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -321,7 +321,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
esdhc_write32(&regs->cmdarg, cmd->cmdarg);
#if defined(CONFIG_FSL_USDHC)
esdhc_write32(&regs->mixctrl,
- (esdhc_read32(&regs->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
+ (esdhc_read32(&regs->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F)
+ | (mmc->ddr_mode ? XFERTYP_DDREN : 0));
esdhc_write32(&regs->xfertyp, xfertyp & 0xFFFF0000);
#else
esdhc_write32(&regs->xfertyp, xfertyp);
@@ -457,7 +458,7 @@ static void set_sysctl(struct mmc *mmc, uint clock)
if ((sdhc_clk / (div * pre_div)) <= clock)
break;
- pre_div >>= 1;
+ pre_div >>= mmc->ddr_mode ? 2 : 1;
div -= 1;
clk = (pre_div << 8) | (div << 4);
@@ -620,6 +621,9 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
}
cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
+#ifdef CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
+ cfg->cfg.host_caps |= MMC_MODE_DDR_52MHz;
+#endif
if (cfg->max_bus_width > 0) {
if (cfg->max_bus_width < 8)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index b8039cd..a13769e 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1693,11 +1693,19 @@ void print_mmc_devices(char separator)
{
struct mmc *m;
struct list_head *entry;
+ char *mmc_type;
list_for_each(entry, &mmc_devices) {
m = list_entry(entry, struct mmc, link);
+ if (m->has_init)
+ mmc_type = IS_SD(m) ? "SD" : "eMMC";
+ else
+ mmc_type = NULL;
+
printf("%s: %d", m->cfg->name, m->block_dev.dev);
+ if (mmc_type)
+ printf(" (%s)", mmc_type);
if (entry->next != &mmc_devices) {
printf("%c", separator);
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index de88e19..82d7984 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -374,7 +374,8 @@ static void sdhci_set_ios(struct mmc *mmc)
(host->quirks & SDHCI_QUIRK_USE_WIDE8))
ctrl |= SDHCI_CTRL_8BITBUS;
} else {
- if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+ if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
+ (host->quirks & SDHCI_QUIRK_USE_WIDE8))
ctrl &= ~SDHCI_CTRL_8BITBUS;
if (mmc->bus_width == 4)
ctrl |= SDHCI_CTRL_4BITBUS;
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index ebfec7c..2233545 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
- cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
- defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN9I)
- cfg->host_caps |= MMC_MODE_HC;
-#endif
+ cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
cfg->f_min = 400000;
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 415ab4e..59278d1 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1 +1,3 @@
source "drivers/mtd/nand/Kconfig"
+
+source "drivers/mtd/spi/Kconfig"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c242214..72825c3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -6,8 +6,6 @@ config SYS_NAND_SELF_INIT
This option, if enabled, provides more flexible and linux-like
NAND initialization process.
-if !SPL_BUILD
-
config NAND_DENALI
bool "Support Denali NAND controller"
select SYS_NAND_SELF_INIT
@@ -34,9 +32,7 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
of OOB area before last ECC sector data starts. This is potentially
used to preserve the bad block marker in the OOB area.
-endif
-
-if SPL_BUILD
+if SPL
config SPL_NAND_DENALI
bool "Support Denali NAND controller for SPL"
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index fc64f48..24123fc 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -989,12 +989,15 @@ int board_nand_init(struct nand_chip *nand)
if (err)
return err;
-#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
/* TODO: Implement for 16-bit bus width */
if (nand->options & NAND_BUSWIDTH_16)
nand->read_buf = nand_read_buf16;
+#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
else
nand->read_buf = omap_nand_read_prefetch8;
+#else
+ else
+ nand->read_buf = nand_read_buf;
#endif
nand->dev_ready = omap_dev_ready;
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
new file mode 100644
index 0000000..2dc46b4
--- /dev/null
+++ b/drivers/mtd/spi/Kconfig
@@ -0,0 +1,14 @@
+config DM_SPI_FLASH
+ bool "Enable Driver Model for SPI flash"
+ depends on DM && SPI
+ help
+ Enable driver model for SPI flash. This SPI flash interface
+ (spi_flash_probe(), spi_flash_write(), etc.) is then
+ implemented by the SPI flash uclass. There is one standard
+ SPI flash driver which knows how to probe most chips
+ supported by U-Boot. The uclass interface is defined in
+ include/spi_flash.h, but is currently fully compatible
+ with the old interface to avoid confusion and duplication
+ during the transition parent. SPI and SPI flash must be
+ enabled together (it is not possible to use driver model
+ for one and not the other).
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 46c4ac6..b8b0803 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
-obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_LAN91C96) += lan91c96.o
obj-$(CONFIG_MACB) += macb.o
@@ -65,5 +64,5 @@ obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \
xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o
obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
-obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/
+obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/
obj-$(CONFIG_VSC9953) += vsc9953.o
diff --git a/drivers/net/fsl_mc/Makefile b/drivers/net/fsl-mc/Makefile
index 4834086..206ac6b 100644
--- a/drivers/net/fsl_mc/Makefile
+++ b/drivers/net/fsl-mc/Makefile
@@ -5,4 +5,6 @@
#
# Layerscape MC driver
-obj-y += mc.o
+obj-y += mc.o \
+ mc_sys.o \
+ dpmng.o
diff --git a/drivers/net/fsl-mc/dpmng.c b/drivers/net/fsl-mc/dpmng.c
new file mode 100644
index 0000000..cc14c7b
--- /dev/null
+++ b/drivers/net/fsl-mc/dpmng.c
@@ -0,0 +1,91 @@
+/* Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <fsl-mc/fsl_mc_sys.h>
+#include <fsl-mc/fsl_mc_cmd.h>
+#include <fsl-mc/fsl_dpmng.h>
+#include "fsl_dpmng_cmd.h"
+
+int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPMNG_CMDID_GET_VERSION,
+ MC_CMD_PRI_LOW, 0);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPMNG_RSP_GET_VERSION(cmd, mc_ver_info);
+
+ return 0;
+}
+
+int dpmng_reset_aiop(struct fsl_mc_io *mc_io, int container_id,
+ int aiop_tile_id)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RESET_AIOP,
+ MC_CMD_PRI_LOW, 0);
+ DPMNG_CMD_RESET_AIOP(cmd, container_id, aiop_tile_id);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpmng_load_aiop(struct fsl_mc_io *mc_io,
+ int container_id,
+ int aiop_tile_id,
+ uint64_t img_iova,
+ uint32_t img_size)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPMNG_CMDID_LOAD_AIOP,
+ MC_CMD_PRI_LOW,
+ 0);
+ DPMNG_CMD_LOAD_AIOP(cmd, container_id, aiop_tile_id, img_size,
+ img_iova);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpmng_run_aiop(struct fsl_mc_io *mc_io,
+ int container_id,
+ int aiop_tile_id,
+ const struct dpmng_aiop_run_cfg *cfg)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RUN_AIOP,
+ MC_CMD_PRI_LOW,
+ 0);
+ DPMNG_CMD_RUN_AIOP(cmd, container_id, aiop_tile_id, cfg);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RESET_MC_PORTAL,
+ MC_CMD_PRI_LOW,
+ 0);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
diff --git a/drivers/net/fsl-mc/fsl_dpmng_cmd.h b/drivers/net/fsl-mc/fsl_dpmng_cmd.h
new file mode 100644
index 0000000..c9fe021
--- /dev/null
+++ b/drivers/net/fsl-mc/fsl_dpmng_cmd.h
@@ -0,0 +1,49 @@
+/* Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __FSL_DPMNG_CMD_H
+#define __FSL_DPMNG_CMD_H
+
+/* Command IDs */
+#define DPMNG_CMDID_GET_VERSION 0x831
+#define DPMNG_CMDID_RESET_AIOP 0x832
+#define DPMNG_CMDID_LOAD_AIOP 0x833
+#define DPMNG_CMDID_RUN_AIOP 0x834
+#define DPMNG_CMDID_RESET_MC_PORTAL 0x835
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPMNG_RSP_GET_VERSION(cmd, mc_ver_info) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mc_ver_info->revision); \
+ MC_RSP_OP(cmd, 0, 32, 32, uint32_t, mc_ver_info->major); \
+ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, mc_ver_info->minor); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPMNG_CMD_RESET_AIOP(cmd, container_id, aiop_tile_id) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \
+ MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPMNG_CMD_LOAD_AIOP(cmd, container_id, aiop_tile_id, img_size, \
+ img_iova) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \
+ MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \
+ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, img_size); \
+ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, img_iova); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPMNG_CMD_RUN_AIOP(cmd, container_id, aiop_tile_id, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \
+ MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \
+ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->cores_mask); \
+ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options); \
+} while (0)
+
+#endif /* __FSL_DPMNG_CMD_H */
diff --git a/drivers/net/fsl_mc/mc.c b/drivers/net/fsl-mc/mc.c
index df84568..74b0085 100644
--- a/drivers/net/fsl_mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -3,9 +3,12 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
+
#include <errno.h>
#include <asm/io.h>
-#include <fsl_mc.h>
+#include <fsl-mc/fsl_mc.h>
+#include <fsl-mc/fsl_mc_sys.h>
+#include <fsl-mc/fsl_dpmng.h>
DECLARE_GLOBAL_DATA_PTR;
static int mc_boot_status;
@@ -14,7 +17,7 @@ static int mc_boot_status;
* Copying MC firmware or DPL image to DDR
*/
static int mc_copy_image(const char *title,
- u64 image_addr, u32 image_size, u64 mc_ram_addr)
+ u64 image_addr, u32 image_size, u64 mc_ram_addr)
{
debug("%s copied to address %p\n", title, (void *)mc_ram_addr);
memcpy((void *)mc_ram_addr, (void *)image_addr, image_size);
@@ -25,10 +28,9 @@ static int mc_copy_image(const char *title,
* MC firmware FIT image parser checks if the image is in FIT
* format, verifies integrity of the image and calculates
* raw image address and size values.
- * Returns 0 if success and 1 if any of the above mentioned
+ * Returns 0 on success and a negative errno on error.
* task fail.
**/
-
int parse_mc_firmware_fit_image(const void **raw_image_addr,
size_t *raw_image_size)
{
@@ -39,7 +41,7 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr,
size_t size;
const char *uname = "firmware";
- /* Check if the image is in NOR flash*/
+ /* Check if the image is in NOR flash */
#ifdef CONFIG_SYS_LS_MC_FW_IN_NOR
fit_hdr = (void *)CONFIG_SYS_LS_MC_FW_ADDR;
#else
@@ -50,26 +52,26 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr,
format = genimg_get_format(fit_hdr);
if (format != IMAGE_FORMAT_FIT) {
- debug("Not a FIT image\n");
- return 1;
+ printf("fsl-mc: ERROR: Bad firmware image (not a FIT image)\n");
+ return -EINVAL;
}
if (!fit_check_format(fit_hdr)) {
- debug("Bad FIT image format\n");
- return 1;
+ printf("fsl-mc: ERROR: Bad firmware image (bad FIT header)\n");
+ return -EINVAL;
}
node_offset = fit_image_get_node(fit_hdr, uname);
if (node_offset < 0) {
- debug("Can not find %s subimage\n", uname);
- return 1;
+ printf("fsl-mc: ERROR: Bad firmware image (missing subimage)\n");
+ return -ENOENT;
}
/* Verify MC firmware image */
if (!(fit_image_verify(fit_hdr, node_offset))) {
- debug("Bad MC firmware hash");
- return 1;
+ printf("fsl-mc: ERROR: Bad firmware image (bad CRC)\n");
+ return -EINVAL;
}
/* Get address and size of raw image */
@@ -90,12 +92,13 @@ int mc_init(bd_t *bis)
u64 mc_dpl_offset;
u32 reg_gsr;
u32 mc_fw_boot_status;
- void *fdt_hdr;
+ void *dpl_fdt_hdr;
int dpl_size;
const void *raw_image_addr;
size_t raw_image_size = 0;
-
- BUILD_BUG_ON(CONFIG_SYS_LS_MC_FW_LENGTH % 4 != 0);
+ struct fsl_mc_io mc_io;
+ int portal_id;
+ struct mc_version mc_ver_info;
/*
* The MC private DRAM block was already carved at the end of DRAM
@@ -130,25 +133,44 @@ int mc_init(bd_t *bis)
/*
* Load the MC FW at the beginning of the MC private DRAM block:
*/
- mc_copy_image(
- "MC Firmware",
- (u64)raw_image_addr,
- raw_image_size,
- mc_ram_addr);
+ mc_copy_image("MC Firmware",
+ (u64)raw_image_addr, raw_image_size, mc_ram_addr);
+
+ /*
+ * Get address and size of the DPL blob stored in flash:
+ */
+#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR
+ dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR;
+#else
+#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined"
+#endif
+
+ error = fdt_check_header(dpl_fdt_hdr);
+ if (error != 0) {
+ printf("fsl-mc: ERROR: Bad DPL image (bad header)\n");
+ goto out;
+ }
+
+ dpl_size = fdt_totalsize(dpl_fdt_hdr);
+ if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) {
+ printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n",
+ dpl_size);
+ error = -EINVAL;
+ goto out;
+ }
/*
* Calculate offset in the MC private DRAM block at which the MC DPL
* blob is to be placed:
*/
#ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET
- BUILD_BUG_ON(
- (CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 ||
- CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff);
+ BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 ||
+ CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff);
mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET;
#else
mc_dpl_offset = mc_get_dram_block_size() -
- roundup(CONFIG_SYS_LS_MC_DPL_LENGTH, 4096);
+ roundup(CONFIG_SYS_LS_MC_DPL_MAX_LENGTH, 4096);
if ((mc_dpl_offset & 0x3) != 0 || mc_dpl_offset > 0xffffffff) {
printf("%s: Invalid MC DPL offset: %llu\n",
@@ -158,23 +180,14 @@ int mc_init(bd_t *bis)
}
#endif
- /* Check if DPL image is in NOR flash */
-#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR
- fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR;
-#else
-#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined"
-#endif
-
- dpl_size = fdt_totalsize(fdt_hdr);
-
/*
* Load the MC DPL blob at the far end of the MC private DRAM block:
+ *
+ * TODO: Should we place the DPL at a different location to match
+ * assumptions of MC firmware about its memory layout?
*/
- mc_copy_image(
- "MC DPL blob",
- (u64)fdt_hdr,
- dpl_size,
- mc_ram_addr + mc_dpl_offset);
+ mc_copy_image("MC DPL blob",
+ (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset);
debug("mc_ccsr_regs %p\n", mc_ccsr_regs);
@@ -200,6 +213,8 @@ int mc_init(bd_t *bis)
*/
out_le32(&mc_ccsr_regs->reg_gsr, (u32)(mc_dpl_offset >> 2));
+ printf("\nfsl-mc: Booting Management Complex ...\n");
+
/*
* Deassert reset and release MC core 0 to run
*/
@@ -219,17 +234,13 @@ int mc_init(bd_t *bis)
}
if (timeout <= 0) {
- printf("%s: timeout booting management complex firmware\n",
- __func__);
+ printf("fsl-mc: timeout booting management complex firmware\n");
/* TODO: Get an error status from an MC CCSR register */
error = -ETIMEDOUT;
goto out;
}
- printf("Management complex booted (boot status: %#x)\n",
- mc_fw_boot_status);
-
if (mc_fw_boot_status != 0x1) {
/*
* TODO: Identify critical errors from the GSR register's FS
@@ -237,8 +248,41 @@ int mc_init(bd_t *bis)
* appropriate errno, so that the status property is set to
* failure in the fsl,dprc device tree node.
*/
+ printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n",
+ reg_gsr);
}
+ /*
+ * TODO: need to obtain the portal_id for the root container from the
+ * DPL
+ */
+ portal_id = 0;
+
+ /*
+ * Check that the MC firmware is responding portal commands:
+ */
+ mc_io.mmio_regs = SOC_MC_PORTAL_ADDR(portal_id);
+ debug("Checking access to MC portal of root DPRC container (portal_id %d, portal physical addr %p)\n",
+ portal_id, mc_io.mmio_regs);
+
+ error = mc_get_version(&mc_io, &mc_ver_info);
+ if (error != 0) {
+ printf("fsl-mc: ERROR: Firmware version check failed (error: %d)\n",
+ error);
+ goto out;
+ }
+
+ if (MC_VER_MAJOR != mc_ver_info.major)
+ printf("fsl-mc: ERROR: Firmware major version mismatch (found: %d, expected: %d)\n",
+ mc_ver_info.major, MC_VER_MAJOR);
+
+ if (MC_VER_MINOR != mc_ver_info.minor)
+ printf("fsl-mc: WARNING: Firmware minor version mismatch (found: %d, expected: %d)\n",
+ mc_ver_info.minor, MC_VER_MINOR);
+
+ printf("fsl-mc: Management Complex booted (version: %d.%d.%d, boot status: %#x)\n",
+ mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision,
+ mc_fw_boot_status);
out:
if (error != 0)
mc_boot_status = -error;
diff --git a/drivers/net/fsl-mc/mc_sys.c b/drivers/net/fsl-mc/mc_sys.c
new file mode 100644
index 0000000..7c8e003
--- /dev/null
+++ b/drivers/net/fsl-mc/mc_sys.c
@@ -0,0 +1,63 @@
+/*
+ * Freescale Layerscape MC I/O wrapper
+ *
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Author: German Rivera <German.Rivera@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <fsl-mc/fsl_mc_sys.h>
+#include <fsl-mc/fsl_mc_cmd.h>
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+
+#define MC_CMD_HDR_READ_CMDID(_hdr) \
+ ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S))
+
+/**
+ * mc_send_command - Send MC command and wait for response
+ *
+ * @mc_io: Pointer to MC I/O object to be used
+ * @cmd: MC command buffer. On input, it contains the command to send to the MC.
+ * On output, it contains the response from the MC if any.
+ *
+ * Depending on the sharing option specified when creating the MC portal
+ * wrapper, this function will use a spinlock or mutex to ensure exclusive
+ * access to the MC portal from the point when the command is sent until a
+ * response is received from the MC.
+ */
+int mc_send_command(struct fsl_mc_io *mc_io,
+ struct mc_command *cmd)
+{
+ enum mc_cmd_status status;
+ int timeout = 2000;
+
+ mc_write_command(mc_io->mmio_regs, cmd);
+
+ for ( ; ; ) {
+ status = mc_read_response(mc_io->mmio_regs, cmd);
+ if (status != MC_CMD_STATUS_READY)
+ break;
+
+ if (--timeout == 0) {
+ printf("Error: Timeout waiting for MC response\n");
+ return -ETIMEDOUT;
+ }
+
+ udelay(500);
+ }
+
+ if (status != MC_CMD_STATUS_OK) {
+ printf("Error: MC command failed (portal: %p, obj handle: %#x, command: %#x, status: %#x)\n",
+ mc_io->mmio_regs,
+ (unsigned int)MC_CMD_HDR_READ_AUTHID(cmd->header),
+ (unsigned int)MC_CMD_HDR_READ_CMDID(cmd->header),
+ (unsigned int)status);
+
+ return -EIO;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
index bedab1d..35f1a57 100644
--- a/drivers/net/keystone_net.c
+++ b/drivers/net/keystone_net.c
@@ -398,8 +398,6 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
sys_has_mdio =
(eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
- keystone2_net_serdes_setup();
-
if (sys_has_mdio)
keystone2_mdio_reset(mdio_bus);
@@ -556,6 +554,8 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
return res;
}
+ keystone2_net_serdes_setup();
+
/* Create phy device and bind it with driver */
#ifdef CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
phy_dev = phy_connect(mdio_bus, eth_priv->phy_addr,
diff --git a/drivers/net/ks8695eth.c b/drivers/net/ks8695eth.c
deleted file mode 100644
index b4822e9..0000000
--- a/drivers/net/ks8695eth.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * ks8695eth.c -- KS8695 ethernet driver
- *
- * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/****************************************************************************/
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-/****************************************************************************/
-
-/*
- * Hardware register access to the KS8695 LAN ethernet port
- * (well, it is the 4 port switch really).
- */
-#define ks8695_read(a) *((volatile unsigned long *) (KS8695_IO_BASE + (a)))
-#define ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v)
-
-/****************************************************************************/
-
-/*
- * Define the descriptor in-memory data structures.
- */
-struct ks8695_txdesc {
- uint32_t owner;
- uint32_t ctrl;
- uint32_t addr;
- uint32_t next;
-};
-
-struct ks8695_rxdesc {
- uint32_t status;
- uint32_t ctrl;
- uint32_t addr;
- uint32_t next;
-};
-
-/****************************************************************************/
-
-/*
- * Allocate local data structures to use for receiving and sending
- * packets. Just to keep it all nice and simple.
- */
-
-#define TXDESCS 4
-#define RXDESCS 4
-#define BUFSIZE 2048
-
-volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256)));
-volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256)));
-volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));;
-
-/****************************************************************************/
-
-/*
- * Ideally we want to use the MAC address stored in flash.
- * But we do some sanity checks in case they are not present
- * first.
- */
-unsigned char eth_mac[] = {
- 0x00, 0x13, 0xc6, 0x00, 0x00, 0x00
-};
-
-void ks8695_getmac(void)
-{
- unsigned char *fp;
- int i;
-
- /* Check if flash MAC is valid */
- fp = (unsigned char *) 0x0201c000;
- for (i = 0; (i < 6); i++) {
- if ((fp[i] != 0) && (fp[i] != 0xff))
- break;
- }
-
- /* If we found a valid looking MAC address then use it */
- if (i < 6)
- memcpy(&eth_mac[0], fp, 6);
-}
-
-/****************************************************************************/
-
-static int ks8695_eth_init(struct eth_device *dev, bd_t *bd)
-{
- int i;
-
- debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__);
-
- /* Reset the ethernet engines first */
- ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
- ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
-
- ks8695_getmac();
-
- /* Set MAC address */
- ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) |
- (eth_mac[3] << 16) | (eth_mac[2] << 24)));
- ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8)));
-
- /* Turn the 4 port switch on */
- i = ks8695_read(KS8695_SWITCH_CTRL0);
- ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1));
- /* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */
-
- /* Initialize descriptor rings */
- for (i = 0; (i < TXDESCS); i++) {
- ks8695_tx[i].owner = 0;
- ks8695_tx[i].ctrl = 0;
- ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE];
- ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1];
- }
- ks8695_tx[TXDESCS-1].ctrl = 0x02000000;
- ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0];
-
- for (i = 0; (i < RXDESCS); i++) {
- ks8695_rx[i].status = 0x80000000;
- ks8695_rx[i].ctrl = BUFSIZE - 4;
- ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE];
- ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1];
- }
- ks8695_rx[RXDESCS-1].ctrl |= 0x00080000;
- ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0];
-
- /* The KS8695 is pretty slow reseting the ethernets... */
- udelay(2000000);
-
- /* Enable the ethernet engine */
- ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]);
- ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]);
- ks8695_write(KS8695_LAN_DMA_TX, 0x3);
- ks8695_write(KS8695_LAN_DMA_RX, 0x71);
- ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
-
- printf("KS8695 ETHERNET: %pM\n", eth_mac);
- return 0;
-}
-
-/****************************************************************************/
-
-static void ks8695_eth_halt(struct eth_device *dev)
-{
- debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__);
-
- /* Reset the ethernet engines */
- ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
- ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
-}
-
-/****************************************************************************/
-
-static int ks8695_eth_recv(struct eth_device *dev)
-{
- volatile struct ks8695_rxdesc *dp;
- int i, len = 0;
-
- debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__);
-
- for (i = 0; (i < RXDESCS); i++) {
- dp= &ks8695_rx[i];
- if ((dp->status & 0x80000000) == 0) {
- len = (dp->status & 0x7ff) - 4;
- NetReceive((void *) dp->addr, len);
- dp->status = 0x80000000;
- ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
- break;
- }
- }
-
- return len;
-}
-
-/****************************************************************************/
-
-static int ks8695_eth_send(struct eth_device *dev, void *packet, int len)
-{
- volatile struct ks8695_txdesc *dp;
- static int next = 0;
-
- debug ("%s(%d): eth_send(packet=%p,len=%d)\n", __FILE__, __LINE__,
- packet, len);
-
- dp = &ks8695_tx[next];
- memcpy((void *) dp->addr, (void *) packet, len);
-
- if (len < 64) {
- memset((void *) (dp->addr + len), 0, 64-len);
- len = 64;
- }
-
- dp->ctrl = len | 0xe0000000;
- dp->owner = 0x80000000;
-
- ks8695_write(KS8695_LAN_DMA_TX, 0x3);
- ks8695_write(KS8695_LAN_DMA_TX_START, 0x1);
-
- if (++next >= TXDESCS)
- next = 0;
-
- return 0;
-}
-
-/****************************************************************************/
-
-int ks8695_eth_initialize(void)
-{
- struct eth_device *dev;
-
- dev = malloc(sizeof(*dev));
- if (dev == NULL)
- return -1;
- memset(dev, 0, sizeof(*dev));
-
- dev->iobase = KS8695_IO_BASE + KS8695_LAN_DMA_TX;
- dev->init = ks8695_eth_init;
- dev->halt = ks8695_eth_halt;
- dev->send = ks8695_eth_send;
- dev->recv = ks8695_eth_recv;
- strcpy(dev->name, "ks8695eth");
-
- eth_register(dev);
- return 0;
-}
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index ed92857..378efbf 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -223,9 +223,12 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
- u16 cmdstat;
+ u16 cmdstat, prefechable_64;
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
+ pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
+ &prefechable_64);
+ prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
@@ -252,12 +255,26 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
(pci_prefetch->bus_lower & 0xfff00000) >> 16);
+ if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
+#ifdef CONFIG_SYS_PCI_64BIT
+ pci_hose_write_config_dword(hose, dev,
+ PCI_PREF_BASE_UPPER32,
+ pci_prefetch->bus_lower >> 32);
+#else
+ pci_hose_write_config_dword(hose, dev,
+ PCI_PREF_BASE_UPPER32,
+ 0x0);
+#endif
cmdstat |= PCI_COMMAND_MEMORY;
} else {
/* We don't support prefetchable memory for now, so disable */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
+ if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
+ pci_hose_write_config_word(hose, dev, PCI_PREF_BASE_UPPER32, 0x0);
+ pci_hose_write_config_word(hose, dev, PCI_PREF_LIMIT_UPPER32, 0x0);
+ }
}
if (pci_io) {
@@ -297,11 +314,28 @@ void pciauto_postscan_setup_bridge(struct pci_controller *hose,
}
if (pci_prefetch) {
+ u16 prefechable_64;
+
+ pci_hose_read_config_word(hose, dev,
+ PCI_PREF_MEMORY_LIMIT,
+ &prefechable_64);
+ prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
+
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
(pci_prefetch->bus_lower - 1) >> 16);
+ if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
+#ifdef CONFIG_SYS_PCI_64BIT
+ pci_hose_write_config_dword(hose, dev,
+ PCI_PREF_LIMIT_UPPER32,
+ (pci_prefetch->bus_lower - 1) >> 32);
+#else
+ pci_hose_write_config_dword(hose, dev,
+ PCI_PREF_LIMIT_UPPER32,
+ 0x0);
+#endif
}
if (pci_io) {
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index 291c249..bcad8f2 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
* Layerscape PCIe driver
*
* SPDX-License-Identifier: GPL-2.0+
@@ -9,8 +9,465 @@
#include <asm/arch/fsl_serdes.h>
#include <pci.h>
#include <asm/io.h>
+#include <errno.h>
+#include <malloc.h>
#include <asm/pcie_layerscape.h>
+#ifndef CONFIG_SYS_PCI_MEMORY_BUS
+#define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
+#define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI_MEMORY_SIZE
+#define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */
+#endif
+
+/* iATU registers */
+#define PCIE_ATU_VIEWPORT 0x900
+#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
+#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
+#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
+#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
+#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
+#define PCIE_ATU_REGION_INDEX3 (0x3 << 0)
+#define PCIE_ATU_CR1 0x904
+#define PCIE_ATU_TYPE_MEM (0x0 << 0)
+#define PCIE_ATU_TYPE_IO (0x2 << 0)
+#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
+#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
+#define PCIE_ATU_CR2 0x908
+#define PCIE_ATU_ENABLE (0x1 << 31)
+#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
+#define PCIE_ATU_LOWER_BASE 0x90C
+#define PCIE_ATU_UPPER_BASE 0x910
+#define PCIE_ATU_LIMIT 0x914
+#define PCIE_ATU_LOWER_TARGET 0x918
+#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
+#define PCIE_ATU_UPPER_TARGET 0x91C
+
+#define PCIE_LINK_CAP 0x7c
+#define PCIE_LINK_SPEED_MASK 0xf
+#define PCIE_LINK_STA 0x82
+
+#define PCIE_DBI_SIZE (4 * 1024) /* 4K */
+
+struct ls_pcie {
+ int idx;
+ void __iomem *dbi;
+ void __iomem *va_cfg0;
+ void __iomem *va_cfg1;
+ struct pci_controller hose;
+};
+
+struct ls_pcie_info {
+ unsigned long regs;
+ int pci_num;
+ u64 cfg0_phys;
+ u64 cfg0_size;
+ u64 cfg1_phys;
+ u64 cfg1_size;
+ u64 mem_bus;
+ u64 mem_phys;
+ u64 mem_size;
+ u64 io_bus;
+ u64 io_phys;
+ u64 io_size;
+};
+
+#define SET_LS_PCIE_INFO(x, num) \
+{ \
+ x.regs = CONFIG_SYS_PCIE##num##_ADDR; \
+ x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF + \
+ CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
+ x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE; \
+ x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF + \
+ CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
+ x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE; \
+ x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS; \
+ x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF + \
+ CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
+ x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE; \
+ x.io_bus = CONFIG_SYS_PCIE_IO_BUS; \
+ x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF + \
+ CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
+ x.io_size = CONFIG_SYS_PCIE_IO_SIZE; \
+ x.pci_num = num; \
+}
+
+#ifdef CONFIG_LS102XA
+#include <asm/arch/immap_ls102xa.h>
+
+/* PEX1/2 Misc Ports Status Register */
+#define LTSSM_STATE_SHIFT 20
+#define LTSSM_STATE_MASK 0x3f
+#define LTSSM_PCIE_L0 0x11 /* L0 state */
+
+static int ls_pcie_link_state(struct ls_pcie *pcie)
+{
+ u32 state;
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+ state = in_be32(&scfg->pexmscportsr[pcie->idx]);
+ state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
+ if (state < LTSSM_PCIE_L0) {
+ debug("....PCIe link error. LTSSM=0x%02x.\n", state);
+ return 0;
+ }
+
+ return 1;
+}
+#else
+#define PCIE_LDBG 0x7FC
+
+static int ls_pcie_link_state(struct ls_pcie *pcie)
+{
+ u32 state;
+
+ state = readl(pcie->dbi + PCIE_LDBG);
+ if (state)
+ return 1;
+
+ debug("....PCIe link error.\n");
+ return 0;
+}
+#endif
+
+static int ls_pcie_link_up(struct ls_pcie *pcie)
+{
+ int state;
+ u32 cap;
+
+ state = ls_pcie_link_state(pcie);
+ if (state)
+ return state;
+
+ /* Try to download speed to gen1 */
+ cap = readl(pcie->dbi + PCIE_LINK_CAP);
+ writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP);
+ udelay(2000);
+ state = ls_pcie_link_state(pcie);
+ if (state)
+ return state;
+
+ writel(cap, pcie->dbi + PCIE_LINK_CAP);
+
+ return 0;
+}
+
+static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev)
+{
+ writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
+ pcie->dbi + PCIE_ATU_VIEWPORT);
+ writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
+}
+
+static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev)
+{
+ writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
+ pcie->dbi + PCIE_ATU_VIEWPORT);
+ writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
+}
+
+static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type,
+ u64 phys, u64 bus_addr, pci_size_t size)
+{
+ writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT);
+ writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE);
+ writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE);
+ writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT);
+ writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET);
+ writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET);
+ writel(type, pcie->dbi + PCIE_ATU_CR1);
+ writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2);
+}
+
+static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info)
+{
+#ifdef DEBUG
+ int i;
+#endif
+
+ /* ATU 0 : OUTBOUND : CFG0 */
+ ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0,
+ PCIE_ATU_TYPE_CFG0,
+ info->cfg0_phys,
+ 0,
+ info->cfg0_size);
+ /* ATU 1 : OUTBOUND : CFG1 */
+ ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1,
+ PCIE_ATU_TYPE_CFG1,
+ info->cfg1_phys,
+ 0,
+ info->cfg1_size);
+ /* ATU 2 : OUTBOUND : MEM */
+ ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2,
+ PCIE_ATU_TYPE_MEM,
+ info->mem_phys,
+ info->mem_bus,
+ info->mem_size);
+ /* ATU 3 : OUTBOUND : IO */
+ ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3,
+ PCIE_ATU_TYPE_IO,
+ info->io_phys,
+ info->io_bus,
+ info->io_size);
+
+#ifdef DEBUG
+ for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) {
+ writel(PCIE_ATU_REGION_OUTBOUND | i,
+ pcie->dbi + PCIE_ATU_VIEWPORT);
+ debug("iATU%d:\n", i);
+ debug("\tLOWER PHYS 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_LOWER_BASE));
+ debug("\tUPPER PHYS 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_UPPER_BASE));
+ debug("\tLOWER BUS 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_LOWER_TARGET));
+ debug("\tUPPER BUS 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_UPPER_TARGET));
+ debug("\tLIMIT 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_LIMIT));
+ debug("\tCR1 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_CR1));
+ debug("\tCR2 0x%08x\n",
+ readl(pcie->dbi + PCIE_ATU_CR2));
+ }
+#endif
+}
+
+int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ /* Do not skip controller */
+ return 0;
+}
+
+static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d)
+{
+ if (PCI_DEV(d) > 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
+ int where, u32 *val)
+{
+ struct ls_pcie *pcie = hose->priv_data;
+ u32 busdev, *addr;
+
+ if (ls_pcie_addr_valid(hose, d)) {
+ *val = 0xffffffff;
+ return -EINVAL;
+ }
+
+ if (PCI_BUS(d) == hose->first_busno) {
+ addr = pcie->dbi + (where & ~0x3);
+ } else {
+ busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
+ PCIE_ATU_DEV(PCI_DEV(d)) |
+ PCIE_ATU_FUNC(PCI_FUNC(d));
+
+ if (PCI_BUS(d) == hose->first_busno + 1) {
+ ls_pcie_cfg0_set_busdev(pcie, busdev);
+ addr = pcie->va_cfg0 + (where & ~0x3);
+ } else {
+ ls_pcie_cfg1_set_busdev(pcie, busdev);
+ addr = pcie->va_cfg1 + (where & ~0x3);
+ }
+ }
+
+ *val = readl(addr);
+
+ return 0;
+}
+
+static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
+ int where, u32 val)
+{
+ struct ls_pcie *pcie = hose->priv_data;
+ u32 busdev, *addr;
+
+ if (ls_pcie_addr_valid(hose, d))
+ return -EINVAL;
+
+ if (PCI_BUS(d) == hose->first_busno) {
+ addr = pcie->dbi + (where & ~0x3);
+ } else {
+ busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
+ PCIE_ATU_DEV(PCI_DEV(d)) |
+ PCIE_ATU_FUNC(PCI_FUNC(d));
+
+ if (PCI_BUS(d) == hose->first_busno + 1) {
+ ls_pcie_cfg0_set_busdev(pcie, busdev);
+ addr = pcie->va_cfg0 + (where & ~0x3);
+ } else {
+ ls_pcie_cfg1_set_busdev(pcie, busdev);
+ addr = pcie->va_cfg1 + (where & ~0x3);
+ }
+ }
+
+ writel(val, addr);
+
+ return 0;
+}
+
+static void ls_pcie_setup_ctrl(struct ls_pcie *pcie,
+ struct ls_pcie_info *info)
+{
+ struct pci_controller *hose = &pcie->hose;
+ pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
+
+ ls_pcie_setup_atu(pcie, info);
+
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0);
+
+ /* program correct class for RC */
+ pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE,
+ PCI_CLASS_BRIDGE_PCI);
+}
+
+int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
+{
+ struct ls_pcie *pcie;
+ struct pci_controller *hose;
+ int num = dev - PCIE1;
+ pci_dev_t pdev = PCI_BDF(busno, 0, 0);
+ int i, linkup, ep_mode;
+ u8 header_type;
+ u16 temp16;
+
+ if (!is_serdes_configured(dev)) {
+ printf("PCIe%d: disabled\n", num + 1);
+ return busno;
+ }
+
+ pcie = malloc(sizeof(*pcie));
+ if (!pcie)
+ return busno;
+ memset(pcie, 0, sizeof(*pcie));
+
+ hose = &pcie->hose;
+ hose->priv_data = pcie;
+ hose->first_busno = busno;
+ pcie->idx = num;
+ pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE);
+ pcie->va_cfg0 = map_physmem(info->cfg0_phys,
+ info->cfg0_size,
+ MAP_NOCACHE);
+ pcie->va_cfg1 = map_physmem(info->cfg1_phys,
+ info->cfg1_size,
+ MAP_NOCACHE);
+
+ /* outbound memory */
+ pci_set_region(&hose->regions[0],
+ (pci_size_t)info->mem_bus,
+ (phys_size_t)info->mem_phys,
+ (pci_size_t)info->mem_size,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(&hose->regions[1],
+ (pci_size_t)info->io_bus,
+ (phys_size_t)info->io_phys,
+ (pci_size_t)info->io_size,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(&hose->regions[2],
+ CONFIG_SYS_PCI_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ CONFIG_SYS_PCI_MEMORY_SIZE,
+ PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 3;
+
+ for (i = 0; i < hose->region_count; i++)
+ debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n",
+ i,
+ (u64)hose->regions[i].phys_start,
+ (u64)hose->regions[i].bus_start,
+ (u64)hose->regions[i].size,
+ hose->regions[i].flags);
+
+ pci_set_ops(hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ ls_pcie_read_config,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ ls_pcie_write_config);
+
+ pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type);
+ ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
+ printf("PCIe%u: %s ", info->pci_num,
+ ep_mode ? "Endpoint" : "Root Complex");
+
+ linkup = ls_pcie_link_up(pcie);
+
+ if (!linkup) {
+ /* Let the user know there's no PCIe link */
+ printf("no link, regs @ 0x%lx\n", info->regs);
+ hose->last_busno = hose->first_busno;
+ return busno;
+ }
+
+ /* Print the negotiated PCIe link width */
+ pci_hose_read_config_word(hose, dev, PCIE_LINK_STA, &temp16);
+ printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
+ (temp16 & 0xf), info->regs);
+
+ if (ep_mode)
+ return busno;
+
+ ls_pcie_setup_ctrl(pcie, info);
+
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+
+ printf("PCIe%x: Bus %02x - %02x\n",
+ info->pci_num, hose->first_busno, hose->last_busno);
+
+ return hose->last_busno + 1;
+}
+
+int ls_pcie_init_board(int busno)
+{
+ struct ls_pcie_info info;
+
+#ifdef CONFIG_PCIE1
+ SET_LS_PCIE_INFO(info, 1);
+ busno = ls_pcie_init_ctrl(busno, PCIE1, &info);
+#endif
+
+#ifdef CONFIG_PCIE2
+ SET_LS_PCIE_INFO(info, 2);
+ busno = ls_pcie_init_ctrl(busno, PCIE2, &info);
+#endif
+
+#ifdef CONFIG_PCIE3
+ SET_LS_PCIE_INFO(info, 3);
+ busno = ls_pcie_init_ctrl(busno, PCIE3, &info);
+#endif
+
+#ifdef CONFIG_PCIE4
+ SET_LS_PCIE_INFO(info, 4);
+ busno = ls_pcie_init_ctrl(busno, PCIE4, &info);
+#endif
+
+ return busno;
+}
+
+void pci_init_board(void)
+{
+ ls_pcie_init_board(0);
+}
+
#ifdef CONFIG_OF_BOARD_SETUP
#include <libfdt.h>
#include <fdt_support.h>
@@ -38,6 +495,14 @@ void ft_pcie_setup(void *blob, bd_t *bd)
#ifdef CONFIG_PCIE2
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
#endif
+
+ #ifdef CONFIG_PCIE3
+ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3);
+ #endif
+
+ #ifdef CONFIG_PCIE4
+ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4);
+ #endif
}
#else
@@ -45,7 +510,3 @@ void ft_pcie_setup(void *blob, bd_t *bd)
{
}
#endif
-
-void pci_init_board(void)
-{
-}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a0b6e02..1686a1f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -2,8 +2,69 @@ config DM_SERIAL
bool "Enable Driver Model for serial drivers"
depends on DM
help
- If you want to use driver model for serial drivers, say Y.
- To use legacy serial drivers, say N.
+ Enable driver model for serial. This replaces
+ drivers/serial/serial.c with the serial uclass, which
+ implements serial_putc() etc. The uclass interface is
+ defined in include/serial.h.
+
+config DEBUG_UART
+ bool "Enable an early debug UART for debugging"
+ help
+ The debug UART is intended for use very early in U-Boot to debug
+ problems when an ICE or other debug mechanism is not available.
+
+ To use it you should:
+ - Make sure your UART supports this interface
+ - Enable CONFIG_DEBUG_UART
+ - Enable the CONFIG for your UART to tell it to provide this interface
+ (e.g. CONFIG_DEBUG_UART_NS16550)
+ - Define the required settings as needed (see below)
+ - Call debug_uart_init() before use
+ - Call debug_uart_putc() to output a character
+
+ Depending on your platform it may be possible to use this UART before
+ a stack is available.
+
+ If your UART does not support this interface you can probably add
+ support quite easily. Remember that you cannot use driver model and
+ it is preferred to use no stack.
+
+ You must not use this UART once driver model is working and the
+ serial drivers are up and running (done in serial_init()). Otherwise
+ the drivers may conflict and you will get strange output.
+
+choice
+ prompt "Select which UART will provide the debug UART"
+ depends on DEBUG_UART
+
+config DEBUG_UART_NS16550
+ bool "ns16550"
+ help
+ Select this to enable a debug UART using the ns16550 driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver model serial is running.
+
+endchoice
+
+config DEBUG_UART_BASE
+ hex "Base address of UART"
+ depends on DEBUG_UART
+ help
+ This is the base address of your UART for memory-mapped UARTs.
+
+ A default should be provided by your board, but if not you will need
+ to use the correct value here.
+
+config DEBUG_UART_CLOCK
+ int "UART input clock"
+ depends on DEBUG_UART
+ help
+ The UART input clock determines the speed of the internal UART
+ circuitry. The baud rate is derived from this by dividing the input
+ clock down.
+
+ A default should be provided by your board, but if not you will need
+ to use the correct value here.
config UNIPHIER_SERIAL
bool "UniPhier on-chip UART support"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4cc00cd..b385852 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -8,6 +8,7 @@
ifdef CONFIG_DM_SERIAL
obj-y += serial-uclass.o
obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
+obj-$(CONFIG_PPC) += serial_ppc.o
else
obj-y += serial.o
obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
@@ -26,7 +27,6 @@ obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
obj-$(CONFIG_SYS_NS16550) += ns16550.o
obj-$(CONFIG_S5P) += serial_s5p.o
obj-$(CONFIG_IMX_SERIAL) += serial_imx.o
-obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
obj-$(CONFIG_MXC_UART) += serial_mxc.o
obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 70c9462..eb00f1c 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -55,17 +55,9 @@ DECLARE_GLOBAL_DATA_PTR;
#endif /* CONFIG_SYS_NS16550_IER */
#ifdef CONFIG_DM_SERIAL
-static void ns16550_writeb(NS16550_t port, int offset, int value)
-{
- struct ns16550_platdata *plat = port->plat;
- unsigned char *addr;
- offset *= 1 << plat->reg_shift;
- addr = map_sysmem(plat->base, 0) + offset;
- /*
- * As far as we know it doesn't make sense to support selection of
- * these options at run-time, so use the existing CONFIG options.
- */
+static inline void serial_out_shift(unsigned char *addr, int shift, int value)
+{
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
outb(value, (ulong)addr);
#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
@@ -73,19 +65,14 @@ static void ns16550_writeb(NS16550_t port, int offset, int value)
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
out_be32(addr, value);
#elif defined(CONFIG_SYS_BIG_ENDIAN)
- writeb(value, addr + (1 << plat->reg_shift) - 1);
+ writeb(value, addr + (1 << shift) - 1);
#else
writeb(value, addr);
#endif
}
-static int ns16550_readb(NS16550_t port, int offset)
+static inline int serial_in_shift(unsigned char *addr, int shift)
{
- struct ns16550_platdata *plat = port->plat;
- unsigned char *addr;
-
- offset *= 1 << plat->reg_shift;
- addr = map_sysmem(plat->base, 0) + offset;
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
return inb((ulong)addr);
#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
@@ -93,12 +80,37 @@ static int ns16550_readb(NS16550_t port, int offset)
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
return in_be32(addr);
#elif defined(CONFIG_SYS_BIG_ENDIAN)
- return readb(addr + (1 << plat->reg_shift) - 1);
+ return readb(addr + (1 << reg_shift) - 1);
#else
return readb(addr);
#endif
}
+static void ns16550_writeb(NS16550_t port, int offset, int value)
+{
+ struct ns16550_platdata *plat = port->plat;
+ unsigned char *addr;
+
+ offset *= 1 << plat->reg_shift;
+ addr = map_sysmem(plat->base, 0) + offset;
+ /*
+ * As far as we know it doesn't make sense to support selection of
+ * these options at run-time, so use the existing CONFIG options.
+ */
+ serial_out_shift(addr, plat->reg_shift, value);
+}
+
+static int ns16550_readb(NS16550_t port, int offset)
+{
+ struct ns16550_platdata *plat = port->plat;
+ unsigned char *addr;
+
+ offset *= 1 << plat->reg_shift;
+ addr = map_sysmem(plat->base, 0) + offset;
+
+ return serial_in_shift(addr, plat->reg_shift);
+}
+
/* We can clean these up once everything is moved to driver model */
#define serial_out(value, addr) \
ns16550_writeb(com_port, addr - (unsigned char *)com_port, value)
@@ -106,10 +118,15 @@ static int ns16550_readb(NS16550_t port, int offset)
ns16550_readb(com_port, addr - (unsigned char *)com_port)
#endif
-int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
+static inline int calc_divisor(NS16550_t port, int clock, int baudrate)
{
const unsigned int mode_x_div = 16;
+ return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate);
+}
+
+int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
+{
#ifdef CONFIG_OMAP1510
/* If can't cleanly clock 115200 set div to 1 */
if ((clock == 12000000) && (baudrate == 115200)) {
@@ -119,7 +136,7 @@ int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
port->osc_12m_sel = 0; /* clear if previsouly set */
#endif
- return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate);
+ return calc_divisor(port, clock, baudrate);
}
static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
@@ -219,6 +236,47 @@ int NS16550_tstc(NS16550_t com_port)
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
+#ifdef CONFIG_DEBUG_UART_NS16550
+
+#include <debug_uart.h>
+
+void debug_uart_init(void)
+{
+ struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+ int baud_divisor;
+
+ /*
+ * We copy the code from above because it is already horribly messy.
+ * Trying to refactor to nicely remove the duplication doesn't seem
+ * feasible. The better fix is to move all users of this driver to
+ * driver model.
+ */
+ baud_divisor = calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
+ CONFIG_BAUDRATE);
+
+ serial_out_shift(&com_port->ier, 0, CONFIG_SYS_NS16550_IER);
+ serial_out_shift(&com_port->mcr, 0, UART_MCRVAL);
+ serial_out_shift(&com_port->fcr, 0, UART_FCRVAL);
+
+ serial_out_shift(&com_port->lcr, 0, UART_LCR_BKSE | UART_LCRVAL);
+ serial_out_shift(&com_port->dll, 0, baud_divisor & 0xff);
+ serial_out_shift(&com_port->dlm, 0, (baud_divisor >> 8) & 0xff);
+ serial_out_shift(&com_port->lcr, 0, UART_LCRVAL);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+
+ while (!(serial_in_shift(&com_port->lsr, 0) & UART_LSR_THRE))
+ ;
+ serial_out_shift(&com_port->thr, 0, ch);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
+
#ifdef CONFIG_DM_SERIAL
static int ns16550_serial_putc(struct udevice *dev, const char ch)
{
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 9131a8f..3fc7104 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -258,6 +258,22 @@ static int serial_post_probe(struct udevice *dev)
#endif
int ret;
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+ if (ops->setbrg)
+ ops->setbrg += gd->reloc_off;
+ if (ops->getc)
+ ops->getc += gd->reloc_off;
+ if (ops->putc)
+ ops->putc += gd->reloc_off;
+ if (ops->pending)
+ ops->pending += gd->reloc_off;
+ if (ops->clear)
+ ops->clear += gd->reloc_off;
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+ if (ops->loop)
+ ops->loop += gd->reloc_off
+#endif
+#endif
/* Set the baud rate */
if (ops->setbrg) {
ret = ops->setbrg(dev, gd->baudrate);
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 95c992a..9f78492 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -127,7 +127,6 @@ serial_initfunc(evb64260_serial_initialize);
serial_initfunc(imx_serial_initialize);
serial_initfunc(iop480_serial_initialize);
serial_initfunc(jz_serial_initialize);
-serial_initfunc(ks8695_serial_initialize);
serial_initfunc(leon2_serial_initialize);
serial_initfunc(leon3_serial_initialize);
serial_initfunc(lh7a40x_serial_initialize);
@@ -220,7 +219,6 @@ void serial_initialize(void)
imx_serial_initialize();
iop480_serial_initialize();
jz_serial_initialize();
- ks8695_serial_initialize();
leon2_serial_initialize();
leon3_serial_initialize();
lh7a40x_serial_initialize();
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
deleted file mode 100644
index 13adabd..0000000
--- a/drivers/serial/serial_ks8695.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * serial.c -- KS8695 serial driver
- *
- * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#ifndef CONFIG_SERIAL1
-#error "Bad: you didn't configure serial ..."
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Define the UART hardware register access structure.
- */
-struct ks8695uart {
- unsigned int RX; /* 0x00 - Receive data (r) */
- unsigned int TX; /* 0x04 - Transmit data (w) */
- unsigned int FCR; /* 0x08 - Fifo Control (r/w) */
- unsigned int LCR; /* 0x0c - Line Control (r/w) */
- unsigned int MCR; /* 0x10 - Modem Control (r/w) */
- unsigned int LSR; /* 0x14 - Line Status (r/w) */
- unsigned int MSR; /* 0x18 - Modem Status (r/w) */
- unsigned int BD; /* 0x1c - Baud Rate (r/w) */
- unsigned int SR; /* 0x20 - Status (r/w) */
-};
-
-#define KS8695_UART_ADDR ((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER))
-#define KS8695_UART_CLK 25000000
-
-
-/*
- * Under some circumstances we want to be "quiet" and not issue any
- * serial output - though we want u-boot to otherwise work and behave
- * the same. By default be noisy.
- */
-int serial_console = 1;
-
-
-static void ks8695_serial_setbrg(void)
-{
- volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-
- /* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/
- uartp->BD = KS8695_UART_CLK / gd->baudrate;
- uartp->LCR = KS8695_UART_LINEC_WLEN8;
-}
-
-static int ks8695_serial_init(void)
-{
- serial_console = 1;
- serial_setbrg();
- return 0;
-}
-
-static void ks8695_serial_raw_putc(const char c)
-{
- volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
- int i;
-
- for (i = 0; (i < 0x100000); i++) {
- if (uartp->LSR & KS8695_UART_LINES_TXFE)
- break;
- }
-
- uartp->TX = c;
-}
-
-static void ks8695_serial_putc(const char c)
-{
- if (serial_console) {
- ks8695_serial_raw_putc(c);
- if (c == '\n')
- ks8695_serial_raw_putc('\r');
- }
-}
-
-static int ks8695_serial_tstc(void)
-{
- volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
- if (serial_console)
- return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0);
- return 0;
-}
-
-static int ks8695_serial_getc(void)
-{
- volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
-
- while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0)
- ;
- return (uartp->RX);
-}
-
-static struct serial_device ks8695_serial_drv = {
- .name = "ks8695_serial",
- .start = ks8695_serial_init,
- .stop = NULL,
- .setbrg = ks8695_serial_setbrg,
- .putc = ks8695_serial_putc,
- .puts = default_serial_puts,
- .getc = ks8695_serial_getc,
- .tstc = ks8695_serial_tstc,
-};
-
-void ks8695_serial_initialize(void)
-{
- serial_register(&ks8695_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &ks8695_serial_drv;
-}
diff --git a/drivers/serial/serial_ppc.c b/drivers/serial/serial_ppc.c
new file mode 100644
index 0000000..47141c6
--- /dev/null
+++ b/drivers/serial/serial_ppc.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ns16550.h>
+#include <serial.h>
+
+static const struct udevice_id ppc_serial_ids[] = {
+ { .compatible = "ns16550" },
+ { }
+};
+
+static int ppc_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ns16550_platdata *plat = dev_get_platdata(dev);
+ int ret;
+
+ ret = ns16550_serial_ofdata_to_platdata(dev);
+ if (ret)
+ return ret;
+ plat->clock = get_serial_clock();
+
+ return 0;
+}
+
+U_BOOT_DRIVER(serial_ns16550) = {
+ .name = "serial_ppc",
+ .id = UCLASS_SERIAL,
+ .of_match = ppc_serial_ids,
+ .ofdata_to_platdata = ppc_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+ .priv_auto_alloc_size = sizeof(struct NS16550),
+ .probe = ns16550_serial_probe,
+ .ops = &ns16550_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 7c1f271..3641c9f 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -1,78 +1,21 @@
/*
* SuperH SCIF device driver.
* Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
+ * Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <errno.h>
+#include <dm.h>
#include <asm/io.h>
#include <asm/processor.h>
-#include "serial_sh.h"
#include <serial.h>
#include <linux/compiler.h>
-
-#if defined(CONFIG_CONS_SCIF0)
-# define SCIF_BASE SCIF0_BASE
-#elif defined(CONFIG_CONS_SCIF1)
-# define SCIF_BASE SCIF1_BASE
-#elif defined(CONFIG_CONS_SCIF2)
-# define SCIF_BASE SCIF2_BASE
-#elif defined(CONFIG_CONS_SCIF3)
-# define SCIF_BASE SCIF3_BASE
-#elif defined(CONFIG_CONS_SCIF4)
-# define SCIF_BASE SCIF4_BASE
-#elif defined(CONFIG_CONS_SCIF5)
-# define SCIF_BASE SCIF5_BASE
-#elif defined(CONFIG_CONS_SCIF6)
-# define SCIF_BASE SCIF6_BASE
-#elif defined(CONFIG_CONS_SCIF7)
-# define SCIF_BASE SCIF7_BASE
-#else
-# error "Default SCIF doesn't set....."
-#endif
-
-#if defined(CONFIG_SCIF_A)
- #define SCIF_BASE_PORT PORT_SCIFA
-#else
- #define SCIF_BASE_PORT PORT_SCIF
-#endif
-
-static struct uart_port sh_sci = {
- .membase = (unsigned char*)SCIF_BASE,
- .mapbase = SCIF_BASE,
- .type = SCIF_BASE_PORT,
-};
-
-static void sh_serial_setbrg(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SCIF_USE_EXT_CLK
- unsigned short dl = DL_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ);
- sci_out(&sh_sci, DL, dl);
- /* Need wait: Clock * 1/dl $B!_(B 1/16 */
- udelay((1000000 * dl * 16 / CONFIG_SYS_CLK_FREQ) * 1000 + 1);
-#else
- sci_out(&sh_sci, SCBRR,
- SCBRR_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ));
-#endif
-}
-
-static int sh_serial_init(void)
-{
- sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
- sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
- sci_out(&sh_sci, SCSMR, 0);
- sci_out(&sh_sci, SCSMR, 0);
- sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
- sci_in(&sh_sci, SCFCR);
- sci_out(&sh_sci, SCFCR, 0);
-
- serial_setbrg();
- return 0;
-}
+#include <dm/platform_data/serial_sh.h>
+#include "serial_sh.h"
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
@@ -86,7 +29,7 @@ static int scif_rxfill(struct uart_port *port)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
- (port->mapbase == 0xffe08000)) {
+ (port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
@@ -109,80 +52,253 @@ static int scif_rxfill(struct uart_port *port)
}
#endif
-static int serial_rx_fifo_level(void)
+static void sh_serial_init_generic(struct uart_port *port)
{
- return scif_rxfill(&sh_sci);
+ sci_out(port, SCSCR , SCSCR_INIT(port));
+ sci_out(port, SCSCR , SCSCR_INIT(port));
+ sci_out(port, SCSMR, 0);
+ sci_out(port, SCSMR, 0);
+ sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
+ sci_in(port, SCFCR);
+ sci_out(port, SCFCR, 0);
}
-static void handle_error(void)
+static void
+sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate)
{
- sci_in(&sh_sci, SCxSR);
- sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
- sci_in(&sh_sci, SCLSR);
- sci_out(&sh_sci, SCLSR, 0x00);
+ if (port->clk_mode == EXT_CLK) {
+ unsigned short dl = DL_VALUE(baudrate, clk);
+ sci_out(port, DL, dl);
+ /* Need wait: Clock * 1/dl $B!_(B 1/16 */
+ udelay((1000000 * dl * 16 / clk) * 1000 + 1);
+ } else {
+ sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk));
+ }
}
-static void serial_raw_putc(const char c)
+static void handle_error(struct uart_port *port)
{
- while (1) {
- /* Tx fifo is empty */
- if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
- break;
- }
+ sci_in(port, SCxSR);
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ sci_in(port, SCLSR);
+ sci_out(port, SCLSR, 0x00);
+}
+
+static int serial_raw_putc(struct uart_port *port, const char c)
+{
+ /* Tx fifo is empty */
+ if (!(sci_in(port, SCxSR) & SCxSR_TEND(port)))
+ return -EAGAIN;
- sci_out(&sh_sci, SCxTDR, c);
- sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
+ sci_out(port, SCxTDR, c);
+ sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port));
+
+ return 0;
}
-static void sh_serial_putc(const char c)
+static int serial_rx_fifo_level(struct uart_port *port)
{
- if (c == '\n')
- serial_raw_putc('\r');
- serial_raw_putc(c);
+ return scif_rxfill(port);
}
-static int sh_serial_tstc(void)
+static int sh_serial_tstc_generic(struct uart_port *port)
{
- if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
- handle_error();
+ if (sci_in(port, SCxSR) & SCIF_ERRORS) {
+ handle_error(port);
return 0;
}
- return serial_rx_fifo_level() ? 1 : 0;
+ return serial_rx_fifo_level(port) ? 1 : 0;
}
-
-static int serial_getc_check(void)
+static int serial_getc_check(struct uart_port *port)
{
unsigned short status;
- status = sci_in(&sh_sci, SCxSR);
+ status = sci_in(port, SCxSR);
if (status & SCIF_ERRORS)
- handle_error();
- if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
- handle_error();
- return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
+ handle_error(port);
+ if (sci_in(port, SCLSR) & SCxSR_ORER(port))
+ handle_error(port);
+ return status & (SCIF_DR | SCxSR_RDxF(port));
}
-static int sh_serial_getc(void)
+static int sh_serial_getc_generic(struct uart_port *port)
{
unsigned short status;
char ch;
- while (!serial_getc_check())
- ;
+ if (!serial_getc_check(port))
+ return -EAGAIN;
- ch = sci_in(&sh_sci, SCxRDR);
- status = sci_in(&sh_sci, SCxSR);
+ ch = sci_in(port, SCxRDR);
+ status = sci_in(port, SCxSR);
- sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
if (status & SCIF_ERRORS)
- handle_error();
+ handle_error(port);
+
+ if (sci_in(port, SCLSR) & SCxSR_ORER(port))
+ handle_error(port);
+
+ return ch;
+}
+
+#ifdef CONFIG_DM_SERIAL
+
+static int sh_serial_pending(struct udevice *dev, bool input)
+{
+ struct uart_port *priv = dev_get_priv(dev);
+
+ return sh_serial_tstc_generic(priv);
+}
+
+static int sh_serial_putc(struct udevice *dev, const char ch)
+{
+ struct uart_port *priv = dev_get_priv(dev);
+
+ return serial_raw_putc(priv, ch);
+}
+
+static int sh_serial_getc(struct udevice *dev)
+{
+ struct uart_port *priv = dev_get_priv(dev);
+
+ return sh_serial_getc_generic(priv);
+}
+
+static int sh_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct sh_serial_platdata *plat = dev_get_platdata(dev);
+ struct uart_port *priv = dev_get_priv(dev);
+
+ sh_serial_setbrg_generic(priv, plat->clk, baudrate);
+
+ return 0;
+}
+
+static int sh_serial_probe(struct udevice *dev)
+{
+ struct sh_serial_platdata *plat = dev_get_platdata(dev);
+ struct uart_port *priv = dev_get_priv(dev);
+
+ priv->membase = (unsigned char *)plat->base;
+ priv->mapbase = plat->base;
+ priv->type = plat->type;
+ priv->clk_mode = plat->clk_mode;
+
+ sh_serial_init_generic(priv);
+
+ return 0;
+}
+
+static const struct dm_serial_ops sh_serial_ops = {
+ .putc = sh_serial_putc,
+ .pending = sh_serial_pending,
+ .getc = sh_serial_getc,
+ .setbrg = sh_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_sh) = {
+ .name = "serial_sh",
+ .id = UCLASS_SERIAL,
+ .probe = sh_serial_probe,
+ .ops = &sh_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct uart_port),
+};
+
+#else /* CONFIG_DM_SERIAL */
+
+#if defined(CONFIG_CONS_SCIF0)
+# define SCIF_BASE SCIF0_BASE
+#elif defined(CONFIG_CONS_SCIF1)
+# define SCIF_BASE SCIF1_BASE
+#elif defined(CONFIG_CONS_SCIF2)
+# define SCIF_BASE SCIF2_BASE
+#elif defined(CONFIG_CONS_SCIF3)
+# define SCIF_BASE SCIF3_BASE
+#elif defined(CONFIG_CONS_SCIF4)
+# define SCIF_BASE SCIF4_BASE
+#elif defined(CONFIG_CONS_SCIF5)
+# define SCIF_BASE SCIF5_BASE
+#elif defined(CONFIG_CONS_SCIF6)
+# define SCIF_BASE SCIF6_BASE
+#elif defined(CONFIG_CONS_SCIF7)
+# define SCIF_BASE SCIF7_BASE
+#else
+# error "Default SCIF doesn't set....."
+#endif
+
+#if defined(CONFIG_SCIF_A)
+ #define SCIF_BASE_PORT PORT_SCIFA
+#else
+ #define SCIF_BASE_PORT PORT_SCIF
+#endif
+
+static struct uart_port sh_sci = {
+ .membase = (unsigned char *)SCIF_BASE,
+ .mapbase = SCIF_BASE,
+ .type = SCIF_BASE_PORT,
+#ifdef CONFIG_SCIF_USE_EXT_CLK
+ .clk_mode = EXT_CLK,
+#endif
+};
+
+static void sh_serial_setbrg(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ struct uart_port *port = &sh_sci;
+
+ sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate);
+}
+
+static int sh_serial_init(void)
+{
+ struct uart_port *port = &sh_sci;
+
+ sh_serial_init_generic(port);
+ serial_setbrg();
+
+ return 0;
+}
+
+static void sh_serial_putc(const char c)
+{
+ struct uart_port *port = &sh_sci;
+
+ if (c == '\n') {
+ while (1) {
+ if (serial_raw_putc(port, '\r') != -EAGAIN)
+ break;
+ }
+ }
+ while (1) {
+ if (serial_raw_putc(port, c) != -EAGAIN)
+ break;
+ }
+}
+
+static int sh_serial_tstc(void)
+{
+ struct uart_port *port = &sh_sci;
+
+ return sh_serial_tstc_generic(port);
+}
+
+static int sh_serial_getc(void)
+{
+ struct uart_port *port = &sh_sci;
+ int ch;
+
+ while (1) {
+ ch = sh_serial_getc_generic(port);
+ if (ch != -EAGAIN)
+ break;
+ }
- if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
- handle_error();
return ch;
}
@@ -206,3 +322,4 @@ __weak struct serial_device *default_serial_console(void)
{
return &sh_serial_drv;
}
+#endif /* CONFIG_DM_SERIAL */
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index ef88c8f..528aa73 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -2,18 +2,16 @@
* Copy and modify from linux/drivers/serial/sh-sci.h
*/
+#include <dm/platform_data/serial_sh.h>
+
struct uart_port {
unsigned long iobase; /* in/out[bwl] */
unsigned char *membase; /* read/write[bwl] */
unsigned long mapbase; /* for ioremap */
- unsigned int type; /* port type */
+ enum sh_serial_type type; /* port type */
+ enum sh_clk_mode clk_mode; /* clock mode */
};
-#define PORT_SCI 52
-#define PORT_SCIF 53
-#define PORT_SCIFA 83
-#define PORT_SCIFB 93
-
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
#include <asm/regs306x.h>
#endif
@@ -526,6 +524,7 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+SCIF_FNS(DL, 0x00, 0) /* dummy */
#elif defined(CONFIG_ARCH_SH7372) || \
defined(CONFIG_R8A7740)
SCIF_FNS(SCSMR, 0x00, 16)
@@ -541,6 +540,7 @@ SCIF_FNS(SCRFDR, 0x3c, 16)
SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+SCIF_FNS(DL, 0x00, 0) /* dummy */
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
@@ -555,6 +555,7 @@ SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCLSR, 0x24, 16)
+SCIF_FNS(DL, 0x00, 0) /* dummy */
#else
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
/* name off sz off sz off sz off sz off sz*/
@@ -583,18 +584,21 @@ SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
+
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SH7722)
SCIF_FNS(SCSPTR, 0, 0, 0, 0)
#else
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
#endif
+SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
+#endif
#if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
SCIF_FNS(DL, 0, 0, 0x30, 16)
SCIF_FNS(CKS, 0, 0, 0x34, 16)
-#endif
-SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
+#else
+SCIF_FNS(DL, 0, 0, 0x0, 0) /* dummy */
#endif
#endif
#define sci_in(port, reg) sci_##reg##_in(port)
@@ -725,14 +729,14 @@ static inline int sci_rxd_in(struct uart_port *port)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
-static inline int scbrr_calc(struct uart_port port, int bps, int clk)
+static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
{
- if (port.type == PORT_SCIF)
+ if (port->type == PORT_SCIF)
return (clk+16*bps)/(32*bps)-1;
else
return ((clk*2)+16*bps)/(16*bps)-1;
}
-#define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk)
+#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
@@ -742,3 +746,7 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk)
#else /* Generic SH */
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif
+
+#ifndef DL_VALUE
+#define DL_VALUE(bps, clk) 0
+#endif
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e1678e6..7ae2727 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -2,5 +2,11 @@ config DM_SPI
bool "Enable Driver Model for SPI drivers"
depends on DM
help
- If you want to use driver model for SPI drivers, say Y.
- To use legacy SPI drivers, say N.
+ Enable driver model for SPI. The SPI slave interface
+ (spi_setup_slave(), spi_xfer(), etc.) is then implemented by
+ the SPI uclass. Drivers provide methods to access the SPI
+ buses that they control. The uclass interface is defined in
+ include/spi.h. The existing spi_slave structure is attached
+ as 'parent data' to every slave on each bus. Slaves
+ typically use driver-private data instead of extending the
+ spi_slave structure.
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
new file mode 100644
index 0000000..3c6b36d
--- /dev/null
+++ b/drivers/thermal/Kconfig
@@ -0,0 +1,7 @@
+config DM_THERMAL
+ bool "Driver support for thermal devices"
+ help
+ Enable support for temporary-sensing devices. Some SoCs have on-chip
+ temperature sensors to permit warnings, speed throttling or even
+ automatic power-off when the temperature gets too high or low. Other
+ devices may be discrete but connected on a suitable bus.
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 778916d..fe45db1 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -22,7 +22,9 @@
*/
#include <common.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/usbc.h>
+#include <asm-generic/gpio.h>
#include "linux-compat.h"
#include "musb_core.h"
@@ -145,16 +147,6 @@ static void USBC_ForceIdToHigh(__iomem void *base)
musb_writel(base, USBC_REG_o_ISCR, reg_val);
}
-static void USBC_ForceVbusValidDisable(__iomem void *base)
-{
- u32 reg_val;
-
- reg_val = musb_readl(base, USBC_REG_o_ISCR);
- reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_VBUS_VALID);
- reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
- musb_writel(base, USBC_REG_o_ISCR, reg_val);
-}
-
static void USBC_ForceVbusValidToHigh(__iomem void *base)
{
u32 reg_val;
@@ -234,6 +226,33 @@ static int sunxi_musb_init(struct musb *musb)
pr_debug("%s():\n", __func__);
+ if (is_host_enabled(musb)) {
+ int vbus_det = sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
+ if (vbus_det == -1) {
+ eprintf("Error invalid Vusb-det pin\n");
+ return -EINVAL;
+ }
+
+ err = gpio_request(vbus_det, "vbus0_det");
+ if (err)
+ return err;
+
+ err = gpio_direction_input(vbus_det);
+ if (err) {
+ gpio_free(vbus_det);
+ return err;
+ }
+
+ err = gpio_get_value(vbus_det);
+ if (err) {
+ eprintf("Error: A charger is plugged into the OTG\n");
+ gpio_free(vbus_det);
+ return -EIO;
+ }
+
+ gpio_free(vbus_det);
+ }
+
err = sunxi_usbc_request_resources(0);
if (err)
return err;
@@ -248,12 +267,11 @@ static int sunxi_musb_init(struct musb *musb)
if (is_host_enabled(musb)) {
/* Host mode */
USBC_ForceIdToLow(musb->mregs);
- USBC_ForceVbusValidToHigh(musb->mregs);
} else {
/* Peripheral mode */
USBC_ForceIdToHigh(musb->mregs);
- USBC_ForceVbusValidDisable(musb->mregs);
}
+ USBC_ForceVbusValidToHigh(musb->mregs);
return 0;
}
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index af2d47b..22a316b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o
obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
-obj-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
obj-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o
obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
diff --git a/drivers/video/mb86r0xgdc.c b/drivers/video/mb86r0xgdc.c
deleted file mode 100644
index bb7a749..0000000
--- a/drivers/video/mb86r0xgdc.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * (C) Copyright 2010
- * Matthias Weisser <weisserm@arcor.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * mb86r0xgdc.c - Graphic interface for Fujitsu MB86R0x integrated graphic
- * controller.
- */
-
-#include <common.h>
-
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <video_fb.h>
-#include "videomodes.h"
-
-/*
- * 4MB (at the end of system RAM)
- */
-#define VIDEO_MEM_SIZE 0x400000
-
-#define FB_SYNC_CLK_INV (1<<16) /* pixel clock inverted */
-
-/*
- * Graphic Device
- */
-static GraphicDevice mb86r0x;
-
-static void dsp_init(struct mb86r0x_gdc_dsp *dsp, char *modestr,
- u32 *videomem)
-{
- struct ctfb_res_modes var_mode;
- u32 dcm1, dcm2, dcm3;
- u16 htp, hdp, hdb, hsp, vtr, vsp, vdp;
- u8 hsw, vsw;
- u32 l2m, l2em, l2oa0, l2da0, l2oa1, l2da1;
- u16 l2dx, l2dy, l2wx, l2wy, l2ww, l2wh;
- unsigned long div;
- int bpp;
-
- bpp = video_get_params(&var_mode, modestr);
-
- if (bpp == 0) {
- var_mode.xres = 640;
- var_mode.yres = 480;
- var_mode.pixclock = 39721; /* 25MHz */
- var_mode.left_margin = 48;
- var_mode.right_margin = 16;
- var_mode.upper_margin = 33;
- var_mode.lower_margin = 10;
- var_mode.hsync_len = 96;
- var_mode.vsync_len = 2;
- var_mode.sync = 0;
- var_mode.vmode = 0;
- bpp = 15;
- }
-
- /* Fill memory with white */
- memset(videomem, 0xFF, var_mode.xres * var_mode.yres * 2);
-
- mb86r0x.winSizeX = var_mode.xres;
- mb86r0x.winSizeY = var_mode.yres;
-
- /* LCD base clock is ~ 660MHZ. We do calculations in kHz */
- div = 660000 / (1000000000L / var_mode.pixclock);
- if (div > 64)
- div = 64;
- if (0 == div)
- div = 1;
-
- dcm1 = (div - 1) << 8;
- dcm2 = 0x00000000;
- if (var_mode.sync & FB_SYNC_CLK_INV)
- dcm3 = 0x00000100;
- else
- dcm3 = 0x00000000;
-
- htp = var_mode.left_margin + var_mode.xres +
- var_mode.hsync_len + var_mode.right_margin;
- hdp = var_mode.xres;
- hdb = var_mode.xres;
- hsp = var_mode.xres + var_mode.right_margin;
- hsw = var_mode.hsync_len;
-
- vsw = var_mode.vsync_len;
- vtr = var_mode.upper_margin + var_mode.yres +
- var_mode.vsync_len + var_mode.lower_margin;
- vsp = var_mode.yres + var_mode.lower_margin;
- vdp = var_mode.yres;
-
- l2m = ((var_mode.yres - 1) << (0)) |
- (((var_mode.xres * 2) / 64) << (16)) |
- ((1) << (31));
-
- l2em = (1 << 0) | (1 << 1);
-
- l2oa0 = mb86r0x.frameAdrs;
- l2da0 = mb86r0x.frameAdrs;
- l2oa1 = mb86r0x.frameAdrs;
- l2da1 = mb86r0x.frameAdrs;
- l2dx = 0;
- l2dy = 0;
- l2wx = 0;
- l2wy = 0;
- l2ww = var_mode.xres;
- l2wh = var_mode.yres - 1;
-
- writel(dcm1, &dsp->dcm1);
- writel(dcm2, &dsp->dcm2);
- writel(dcm3, &dsp->dcm3);
-
- writew(htp, &dsp->htp);
- writew(hdp, &dsp->hdp);
- writew(hdb, &dsp->hdb);
- writew(hsp, &dsp->hsp);
- writeb(hsw, &dsp->hsw);
-
- writeb(vsw, &dsp->vsw);
- writew(vtr, &dsp->vtr);
- writew(vsp, &dsp->vsp);
- writew(vdp, &dsp->vdp);
-
- writel(l2m, &dsp->l2m);
- writel(l2em, &dsp->l2em);
- writel(l2oa0, &dsp->l2oa0);
- writel(l2da0, &dsp->l2da0);
- writel(l2oa1, &dsp->l2oa1);
- writel(l2da1, &dsp->l2da1);
- writew(l2dx, &dsp->l2dx);
- writew(l2dy, &dsp->l2dy);
- writew(l2wx, &dsp->l2wx);
- writew(l2wy, &dsp->l2wy);
- writew(l2ww, &dsp->l2ww);
- writew(l2wh, &dsp->l2wh);
-
- writel(dcm1 | (1 << 18) | (1 << 31), &dsp->dcm1);
-}
-
-void *video_hw_init(void)
-{
- struct mb86r0x_gdc *gdc = (struct mb86r0x_gdc *) MB86R0x_GDC_BASE;
- GraphicDevice *pGD = &mb86r0x;
- char *s;
- u32 *vid;
-
- memset(pGD, 0, sizeof(GraphicDevice));
-
- pGD->gdfIndex = GDF_15BIT_555RGB;
- pGD->gdfBytesPP = 2;
- pGD->memSize = VIDEO_MEM_SIZE;
- pGD->frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
-
- vid = (u32 *)pGD->frameAdrs;
-
- s = getenv("videomode");
- if (s != NULL)
- dsp_init(&gdc->dsp0, s, vid);
-
- s = getenv("videomode1");
- if (s != NULL)
- dsp_init(&gdc->dsp1, s, vid);
-
- return pGD;
-}
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index f5f24fc..4e12150 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -18,6 +18,7 @@
#include <errno.h>
#include <fdtdec.h>
#include <fdt_support.h>
+#include <i2c.h>
#include <video_fb.h>
#include "videomodes.h"
#include "hitachi_tx18d42vm_lcd.h"
@@ -46,6 +47,7 @@ struct sunxi_display {
GraphicDevice graphic_device;
enum sunxi_monitor monitor;
unsigned int depth;
+ unsigned int fb_size;
} sunxi_display;
#ifdef CONFIG_VIDEO_HDMI
@@ -591,7 +593,7 @@ static void sunxi_lcdc_enable(void)
static void sunxi_lcdc_panel_enable(void)
{
- int pin;
+ int pin, reset_pin;
/*
* Start with backlight disabled to avoid the screen flashing to
@@ -609,6 +611,12 @@ static void sunxi_lcdc_panel_enable(void)
gpio_direction_output(pin, PWM_OFF);
}
+ reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
+ if (reset_pin != -1) {
+ gpio_request(reset_pin, "lcd_reset");
+ gpio_direction_output(reset_pin, 0); /* Assert reset */
+ }
+
/* Give the backlight some time to turn off and power up the panel. */
mdelay(40);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
@@ -616,6 +624,9 @@ static void sunxi_lcdc_panel_enable(void)
gpio_request(pin, "lcd_power");
gpio_direction_output(pin, 1);
}
+
+ if (reset_pin != -1)
+ gpio_direction_output(reset_pin, 1); /* De-assert reset */
}
static void sunxi_lcdc_backlight_enable(void)
@@ -1020,6 +1031,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
mdelay(50); /* Wait for lcd controller power on */
hitachi_tx18d42vm_init();
}
+ if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
+ unsigned int orig_i2c_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
+ i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
+ i2c_set_bus_num(orig_i2c_bus);
+ }
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon0_mode_set(mode, false);
sunxi_composer_enable();
@@ -1060,6 +1077,11 @@ static const char *sunxi_get_mon_desc(enum sunxi_monitor monitor)
return NULL; /* never reached */
}
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ return gd->ram_top - CONFIG_SUNXI_MAX_FB_SIZE;
+}
+
void *video_hw_init(void)
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
@@ -1075,10 +1097,6 @@ void *video_hw_init(void)
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
- printf("Reserved %dkB of RAM for Framebuffer.\n",
- CONFIG_SUNXI_FB_SIZE >> 10);
- gd->fb_base = gd->ram_top;
-
video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode,
&sunxi_display.depth, &options);
#ifdef CONFIG_VIDEO_HDMI
@@ -1169,6 +1187,17 @@ void *video_hw_init(void)
mode->yres, sunxi_get_mon_desc(sunxi_display.monitor));
}
+ sunxi_display.fb_size =
+ (mode->xres * mode->yres * 4 + 0xfff) & ~0xfff;
+ if (sunxi_display.fb_size > CONFIG_SUNXI_MAX_FB_SIZE) {
+ printf("Error need %dkB for fb, but only %dkB is reserved\n",
+ sunxi_display.fb_size >> 10,
+ CONFIG_SUNXI_MAX_FB_SIZE >> 10);
+ return NULL;
+ }
+
+ gd->fb_base = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size - sunxi_display.fb_size;
sunxi_engines_init();
sunxi_mode_set(mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
@@ -1194,6 +1223,7 @@ int sunxi_simplefb_setup(void *blob)
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
int offset, ret;
+ u64 start, size;
const char *pipeline = NULL;
#ifdef CONFIG_MACH_SUN4I
@@ -1237,6 +1267,20 @@ int sunxi_simplefb_setup(void *blob)
return 0; /* Keep older kernels working */
}
+ /*
+ * Do not report the framebuffer as free RAM to the OS, note we cannot
+ * use fdt_add_mem_rsv() here, because then it is still seen as RAM,
+ * and e.g. Linux refuses to iomap RAM on ARM, see:
+ * linux/arch/arm/mm/ioremap.c around line 301.
+ */
+ start = gd->bd->bi_dram[0].start;
+ size = gd->bd->bi_dram[0].size - sunxi_display.fb_size;
+ ret = fdt_fixup_memory_banks(blob, &start, &size, 1);
+ if (ret) {
+ eprintf("Cannot setup simplefb: Error reserving memory\n");
+ return ret;
+ }
+
ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base,
graphic_device->winSizeX, graphic_device->winSizeY,
graphic_device->winSizeX * graphic_device->gdfBytesPP,
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 1dc0f5a..482a4bd 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa))
obj-y += imx_watchdog.o
endif
-obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
obj-$(CONFIG_S5P) += s5p_wdt.o
obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
obj-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o
diff --git a/drivers/watchdog/tnetv107x_wdt.c b/drivers/watchdog/tnetv107x_wdt.c
deleted file mode 100644
index 3d3f366..0000000
--- a/drivers/watchdog/tnetv107x_wdt.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * TNETV107X: Watchdog timer implementation (for reset)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-
-#define MAX_DIV 0xFFFE0001
-
-struct wdt_regs {
- u32 kick_lock;
-#define KICK_LOCK_1 0x5555
-#define KICK_LOCK_2 0xaaaa
- u32 kick;
-
- u32 change_lock;
-#define CHANGE_LOCK_1 0x6666
-#define CHANGE_LOCK_2 0xbbbb
- u32 change;
-
- u32 disable_lock;
-#define DISABLE_LOCK_1 0x7777
-#define DISABLE_LOCK_2 0xcccc
-#define DISABLE_LOCK_3 0xdddd
- u32 disable;
-
- u32 prescale_lock;
-#define PRESCALE_LOCK_1 0x5a5a
-#define PRESCALE_LOCK_2 0xa5a5
- u32 prescale;
-};
-
-static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE;
-
-#define wdt_reg_read(reg) __raw_readl(&regs->reg)
-#define wdt_reg_write(reg, val) __raw_writel((val), &regs->reg)
-
-static int write_prescale_reg(unsigned long prescale_value)
-{
- wdt_reg_write(prescale_lock, PRESCALE_LOCK_1);
- if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1)
- return -1;
-
- wdt_reg_write(prescale_lock, PRESCALE_LOCK_2);
- if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3)
- return -1;
-
- wdt_reg_write(prescale, prescale_value);
-
- return 0;
-}
-
-static int write_change_reg(unsigned long initial_timer_value)
-{
- wdt_reg_write(change_lock, CHANGE_LOCK_1);
- if ((wdt_reg_read(change_lock) & 0x3) != 0x1)
- return -1;
-
- wdt_reg_write(change_lock, CHANGE_LOCK_2);
- if ((wdt_reg_read(change_lock) & 0x3) != 0x3)
- return -1;
-
- wdt_reg_write(change, initial_timer_value);
-
- return 0;
-}
-
-static int wdt_control(unsigned long disable_value)
-{
- wdt_reg_write(disable_lock, DISABLE_LOCK_1);
- if ((wdt_reg_read(disable_lock) & 0x3) != 0x1)
- return -1;
-
- wdt_reg_write(disable_lock, DISABLE_LOCK_2);
- if ((wdt_reg_read(disable_lock) & 0x3) != 0x2)
- return -1;
-
- wdt_reg_write(disable_lock, DISABLE_LOCK_3);
- if ((wdt_reg_read(disable_lock) & 0x3) != 0x3)
- return -1;
-
- wdt_reg_write(disable, disable_value);
- return 0;
-}
-
-static int wdt_set_period(unsigned long msec)
-{
- unsigned long change_value, count_value;
- unsigned long prescale_value = 1;
- unsigned long refclk_khz, maxdiv;
- int ret;
-
- refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM);
- maxdiv = (MAX_DIV / refclk_khz);
-
- if ((!msec) || (msec > maxdiv))
- return -1;
-
- count_value = refclk_khz * msec;
- if (count_value > 0xffff) {
- change_value = count_value / 0xffff + 1;
- prescale_value = count_value / change_value;
- } else {
- change_value = count_value;
- }
-
- ret = write_prescale_reg(prescale_value - 1);
- if (ret)
- return ret;
-
- ret = write_change_reg(change_value);
- if (ret)
- return ret;
-
- return 0;
-}
-
-unsigned long last_wdt = -1;
-
-int wdt_start(unsigned long msecs)
-{
- int ret;
- ret = wdt_control(0);
- if (ret)
- return ret;
- ret = wdt_set_period(msecs);
- if (ret)
- return ret;
- ret = wdt_control(1);
- if (ret)
- return ret;
- ret = wdt_kick();
- last_wdt = msecs;
- return ret;
-}
-
-int wdt_stop(void)
-{
- last_wdt = -1;
- return wdt_control(0);
-}
-
-int wdt_kick(void)
-{
- wdt_reg_write(kick_lock, KICK_LOCK_1);
- if ((wdt_reg_read(kick_lock) & 0x3) != 0x1)
- return -1;
-
- wdt_reg_write(kick_lock, KICK_LOCK_2);
- if ((wdt_reg_read(kick_lock) & 0x3) != 0x3)
- return -1;
-
- wdt_reg_write(kick, 1);
- return 0;
-}
-
-void reset_cpu(ulong addr)
-{
- clk_enable(TNETV107X_LPSC_WDT_ARM);
- wdt_start(1);
- wdt_kick();
-}
diff --git a/dts/Kconfig b/dts/Kconfig
index 5fe63f8..ca5bd6f 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -9,7 +9,6 @@ config SUPPORT_OF_CONTROL
bool
menu "Device Tree Control"
- depends on !SPL_BUILD
depends on SUPPORT_OF_CONTROL
config OF_CONTROL
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index aef39d7..a63a87a 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -32,6 +32,10 @@ typedef struct bd_info {
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
+#ifdef CONFIG_AVR32
+ unsigned char bi_phy_id[4]; /* PHY address for ATAG_ETHERNET */
+ unsigned long bi_board_number;/* ATAG_BOARDINFO */
+#endif
#ifdef CONFIG_ARM
unsigned long bi_arm_freq; /* arm frequency */
unsigned long bi_dsp_freq; /* dsp core frequency */
diff --git a/include/common.h b/include/common.h
index 9129454..77c55c6 100644
--- a/include/common.h
+++ b/include/common.h
@@ -253,6 +253,24 @@ int update_flash_size(int flash_size);
int arch_early_init_r(void);
/**
+ * Reserve all necessary stacks
+ *
+ * This is used in generic board init sequence in common/board_f.c. Each
+ * architecture could provide this function to tailor the required stacks.
+ *
+ * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
+ * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
+ * require only this can leave it untouched.
+ *
+ * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
+ * positions of the stack. The stack pointer(s) will be set to this later.
+ * gd->irq_sp is only required, if the architecture needs it.
+ *
+ * @return 0 if no error
+ */
+__weak int arch_reserve_stacks(void);
+
+/**
* Show the DRAM size in a board-specific way
*
* This is used by boards to display DRAM information in their own way.
diff --git a/include/config_defaults.h b/include/config_defaults.h
index 4d49315..ad08c1d 100644
--- a/include/config_defaults.h
+++ b/include/config_defaults.h
@@ -20,10 +20,4 @@
#define CONFIG_ZLIB 1
#define CONFIG_PARTITIONS 1
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_WARN
-#define CONFIG_DM_DEVICE_REMOVE
-#define CONFIG_DM_STDIO
-#endif
-
#endif
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 49674f4..07a0b3b 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -10,6 +10,10 @@
#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
#define _CONFIG_CMD_DISTRO_BOOTCMD_H
+/* We need the part command */
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
"if " #devtypel " dev ${devnum}; then " \
"setenv devtype " #devtypel "; " \
diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h
index 9cb7a9a..a9106f4 100644
--- a/include/config_uncmd_spl.h
+++ b/include/config_uncmd_spl.h
@@ -20,5 +20,18 @@
#undef CONFIG_CMD_SNTP
#undef CONFIG_CMD_TFTPPUT
#undef CONFIG_CMD_TFTPSRV
+#undef CONFIG_OF_CONTROL
+
+#ifndef CONFIG_SPL_DM
+#undef CONFIG_DM_SERIAL
+#undef CONFIG_DM_GPIO
+#undef CONFIG_DM_I2C
+#undef CONFIG_DM_SPI
+#endif
+
+#undef CONFIG_DM_WARN
+#undef CONFIG_DM_DEVICE_REMOVE
+#undef CONFIG_DM_STDIO
+
#endif /* CONFIG_SPL_BUILD */
#endif /* __CONFIG_UNCMD_SPL_H__ */
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
deleted file mode 100644
index 0d3cf36..0000000
--- a/include/configs/a320evb.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * Configuation settings for the Faraday A320 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/a320.h>
-
-/*
- * mach-type definition
- */
-#define MACH_TYPE_FARADAY 758
-#define CONFIG_MACH_TYPE MACH_TYPE_FARADAY
-
-/*
- * Linux kernel tagged list
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-/*
- * CPU and Board Configuration Options
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Power Management Unit
- */
-#define CONFIG_FTPMU010_POWER
-
-/*
- * Timer
- */
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART */
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1 0x98200000
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_CLK 18432000
-
-/*
- * Ethernet
- */
-#define CONFIG_FTMAC100
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * SDRAM controller configuration
- */
-#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \
- FTSDMC020_TP0_TRP(1) | \
- FTSDMC020_TP0_TRCD(1) | \
- FTSDMC020_TP0_TRF(3) | \
- FTSDMC020_TP0_TWR(1) | \
- FTSDMC020_TP0_TCL(2))
-
-#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \
- FTSDMC020_TP1_INI_REFT(8) | \
- FTSDMC020_TP1_REF_INTV(0x180))
-
-#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \
- FTSDMC020_BANK_DDW_X16 | \
- FTSDMC020_BANK_DSZ_256M | \
- FTSDMC020_BANK_MBW_32 | \
- FTSDMC020_BANK_SIZE_64M)
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-
-/*
- * Load address and memory test area should agree with
- * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000)
-
-#define CONFIG_SYS_TEXT_BASE 0
-
-/*
- * Static memory controller configuration
- */
-
-#define CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-
-#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
- FTSMC020_BANK_SIZE_1M | \
- FTSMC020_BANK_MBW_8)
-
-#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_2) | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define CONFIG_SYS_FTSMC020_CONFIGS { \
- { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
- { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
-}
-
-/*
- * FLASH and environment organization
- */
-
-/* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-/* support JEDEC */
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx8
-
-#define PHYS_FLASH_1 0x00000000
-#define PHYS_FLASH_2 0x00400000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, }
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-
-/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#undef CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* environments */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000)
-#define CONFIG_ENV_SIZE 0x20000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 2aea899..73e1b0a 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -20,8 +20,10 @@
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 9c81e31..540e86a 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -143,7 +143,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 7b4f9cf..35eae76 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -164,7 +164,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 8f3fd0b..a9c064a 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -104,6 +104,10 @@
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
+/* generic board */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
/*
* Command line configuration.
@@ -158,7 +162,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index bbe0aea..25090a6 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -159,7 +159,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 8eeb15c..7a1499d 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -11,6 +11,10 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <linux/kconfig.h>
+
+#define CONFIG_SYS_GENERIC_BOARD
+
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
@@ -19,10 +23,10 @@
* and Arches dual (460GT)
*/
#ifdef CONFIG_CANYONLANDS
-#define CONFIG_460EX 1 /* Specific PPC460EX */
+#define CONFIG_460EX /* Specific PPC460EX */
#define CONFIG_HOSTNAME canyonlands
#else
-#define CONFIG_460GT 1 /* Specific PPC460GT */
+#define CONFIG_460GT /* Specific PPC460GT */
#ifdef CONFIG_GLACIER
#define CONFIG_HOSTNAME glacier
#else
@@ -32,7 +36,7 @@
#endif
#endif
-#define CONFIG_440 1
+#define CONFIG_440
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
@@ -45,10 +49,10 @@
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
-#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
-#define CONFIG_BOARD_TYPES 1 /* support board types */
+#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R /* Call misc_init_r */
+#define CONFIG_BOARD_TYPES /* support board types */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
@@ -134,7 +138,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
@@ -172,9 +176,9 @@
* I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
* code.
*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/
-#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CONFIG_DDR_ECC /* with ECC support */
#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */
#else /* defined(CONFIG_ARCHES) */
@@ -262,8 +266,8 @@
#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
-#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
-#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 /* use AD7414 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
@@ -275,14 +279,14 @@
#if !defined(CONFIG_ARCHES)
/* RTC configuration */
-#define CONFIG_RTC_M41T62 1
+#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#endif
/*-----------------------------------------------------------------------
* Ethernet
*----------------------------------------------------------------------*/
-#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_IBM_EMAC4_V4
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
@@ -322,9 +326,9 @@
#define CONFIG_GPCS_PHY2_ADDR 0xC
#endif /* !defined(CONFIG_ARCHES) */
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_PHY_DYNAMIC_ANEG 1
+#define CONFIG_PHY_RESET /* reset phy upon startup */
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG
/*-----------------------------------------------------------------------
* USB-OHCI
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
deleted file mode 100644
index 1cb54b3..0000000
--- a/include/configs/cm4008.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2004
- * Greg Ungerer <greg.ungerer@opengear.com>.
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_KS8695 1 /* it is a KS8695 CPU */
-#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_KS8695_SERIAL
-#define CONFIG_SERIAL1
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_SAVEENV
-
-
-#define CONFIG_BOOTDELAY 0
-#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200"
-#define CONFIG_BOOTCOMMAND "gofsk 0x02200000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */
-
-#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
deleted file mode 100644
index adebd4b..0000000
--- a/include/configs/cm41xx.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer <greg.ungerer@opengear.com>.
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_KS8695 1 /* it is a KS8695 CPU */
-#define CONFIG_CM41xx 1 /* it is an OpenGear CM41xx boad */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_KS8695_SERIAL
-#define CONFIG_SERIAL1
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_SAVEENV
-
-
-#define CONFIG_BOOTDELAY 0
-#define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200"
-#define CONFIG_BOOTCOMMAND "gofsk 0x02200000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */
-
-#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 1f64495..4207504 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -21,14 +21,7 @@
#define CONFIG_MACH_TYPE 4273
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-
-#define CONFIG_DM_GPIO
#define CONFIG_CMD_GPIO
-
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* Display information on boot */
diff --git a/include/configs/dkb.h b/include/configs/dkb.h
deleted file mode 100644
index 7ffbb14..0000000
--- a/include/configs/dkb.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_DKB_H
-#define __CONFIG_DKB_H
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-TTC DKB"
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
-#define CONFIG_PANTHEON 1 /* SOC Family Name */
-#define CONFIG_MACH_TTC_DKB 1 /* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
-#define CONFIG_NR_DRAM_BANKS_MAX 2
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-#undef CONFIG_ARCH_MISC_INIT
-
-/*
- * Environment variables configurations
- */
-#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
-#define CONFIG_ENV_SIZE 0x20000 /* 64k */
-
-#endif /* __CONFIG_DKB_H */
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 1f3ee55..59676ae 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -17,12 +17,6 @@
#include <linux/sizes.h>
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
@@ -42,7 +36,6 @@
#define CONFIG_ENV_OVERWRITE
/* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/* select serial console configuration */
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 0ba39a2..3ab8d55 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -126,6 +126,8 @@
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
/* I2C */
+
+/* TODO(sjg@chromium.org): Move these two options to Kconfig */
#define CONFIG_DM_I2C
#define CONFIG_DM_I2C_COMPAT
#define CONFIG_CMD_I2C
diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h
index 9cef0b0..b1b8e1a 100644
--- a/include/configs/exynos5-dt-common.h
+++ b/include/configs/exynos5-dt-common.h
@@ -24,9 +24,6 @@
#define CONFIG_POWER_TPS65090
/* Enable keyboard */
-#define CONFIG_CROS_EC /* CROS_EC protocol */
-#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */
-#define CONFIG_CMD_CROS_EC
#define CONFIG_KEYBOARD
#endif
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 338d3dc..75bff4c 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -162,7 +162,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index 73534ad..54eb977 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -62,6 +62,10 @@
#define CONFIG_USART_BASE ATMEL_BASE_USART1
#define CONFIG_USART_ID 1
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+
/* User serviceable stuff */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
@@ -151,7 +155,6 @@
CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 4f137fc..620f950 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -39,7 +39,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 4f0603a..0bc42f1 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -137,7 +137,6 @@
#define CONFIG_SYS_MALLOC_LEN (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
deleted file mode 100644
index 1d78e72..0000000
--- a/include/configs/hawkboard.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-#define CONFIG_SYS_USE_NAND 1
-
-/*
- * SoC Configuration
- */
-#define CONFIG_MACH_DAVINCI_HAWK
-#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
-#define CONFIG_SOC_DA850 /* TI DA850 SoC */
-#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ 24000000
-#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
-
-#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
- DAVINCI_SYSCFG_SUSPSRC_EMAC | \
- DAVINCI_SYSCFG_SUSPSRC_I2C | \
- DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
- DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
- DAVINCI_SYSCFG_SUSPSRC_UART2)
-
-#if defined(CONFIG_UART_U_BOOT)
-#define CONFIG_SYS_TEXT_BASE 0xc1080000
-#elif !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_TEXT_BASE 0xc1180000
-#endif
-
-/* Spl */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds"
-#define CONFIG_SPL_TEXT_BASE 0xc1080000
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
-#define CONFIG_SYS_SDRAM_BASE 0xc0000000
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MONITOR_LEN 0x60000
-
-/* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1)
-
-/* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024)
-
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Network & Ethernet Configuration
- */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-
-/*
- * Nand Flash
- */
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_CLE_MASK 0x10
-#define CONFIG_ALE_MASK 0x8
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST /* SPL nand driver configuration */
-#define CFG_DAVINCI_STD_NAND_LAYOUT
-#define CONFIG_SYS_NAND_CS 3
-#define CONFIG_SYS_NAND_PAGE_2K
-/* Max number of NAND devices */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, }
-/* Block 0--not used by bootcode */
-#define CONFIG_ENV_OFFSET 0x0
-
-#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000
-#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
- CONFIG_SYS_NAND_U_BOOT_SIZE - \
- CONFIG_SYS_MALLOC_LEN - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_NAND_ECCPOS { \
- 24, 25, 26, 27, 28, \
- 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
- 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
- 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
- 59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 10
-#define CONFIG_SYS_NAND_OOBSIZE 64
-
-#endif /* CONFIG_SYS_USE_NAND */
-
-/* USB Configs */
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_OHCI_DA8XX
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x01E25000
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "hawkboard"
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS \
- "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\
- "4M ip=static"
-#define CONFIG_BOOTDELAY 3
-
-/*
- * U-Boot commands
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_EXT2
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_SYS_USE_NAND
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_NAND
-#endif
-
-#ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 4195fa3..49039d6 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -18,6 +18,8 @@
#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
deleted file mode 100644
index 8175621..0000000
--- a/include/configs/jadecpu.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * (C) Copyright 2010
- * Matthias Weisser <weisserm@arcor.de>
- *
- * Configuation settings for the jadecpu board
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MB86R0x
-#define CONFIG_MB86R0x_IOCLK get_bus_freq(0)
-#define CONFIG_SYS_TEXT_BASE 0x10000000
-
-
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
-
-#define MACH_TYPE_JADECPU 2636
-
-#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU
-
-/*
- * Environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "gs_fast_boot=setenv bootdelay 5\0" \
- "gs_slow_boot=setenv bootdelay 10\0" \
- "bootcmd=dcache off; mw.l 0x40000000 0 1024; usb start;" \
- "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \
- "bootelf 0x40000000\0" \
- ""
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_BOARD_LATE_INIT
-
-/*
- * Compressions
- */
-#define CONFIG_LZO
-
-/*
- * Hardware drivers
- */
-
-/*
- * Serial
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#define CONFIG_SYS_NS16550_COM1 0xfffe1000 /* UART 0 */
-#define CONFIG_SYS_NS16550_COM2 0xfff50000 /* UART 2 */
-#define CONFIG_SYS_NS16550_COM3 0xfff51000 /* UART 3 */
-#define CONFIG_SYS_NS16550_COM4 0xfff43000 /* UART 4 */
-
-#define CONFIG_CONS_INDEX 4
-
-/*
- * Ethernet
- */
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x02000000
-#define CONFIG_SMC911X_16_BIT
-
-/*
- * Video
- */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_MB86R0xGDC
-#define CONFIG_SYS_WHITE_ON_BLACK
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024)
-#define VIDEO_FB_16BPP_WORD_SWAP
-#define VIDEO_KBD_INIT_FCT 0
-#define VIDEO_TSTC_FCT serial_stub_tstc
-#define VIDEO_GETC_FCT serial_stub_getc
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_CACHE
-
-#define CONFIG_SYS_HUSH_PARSER
-
-/* USB */
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0xFFF81000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mb86r0x"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x40000000 /* Start address of DDRRAM */
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR 0x01008000
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE 0x10000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_SIZE (128 * 1024)
-
-/*
- * CFI FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster */
-
-#define CONFIG_SYS_LOAD_ADDR 0x40000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_PROMPT "jade> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-#define CONFIG_PREBOOT ""
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "delaygs"
-#define CONFIG_AUTOBOOT_STOP_STR "stopgs"
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (10 << 20)
-#define CONFIG_SYS_MEM_TOP_HIDE (4 << 20)
-
-/*
- * Clock reset generator init
- */
-#define CONFIG_SYS_CRG_CRHA_INIT 0xffff
-#define CONFIG_SYS_CRG_CRPA_INIT 0xffff
-#define CONFIG_SYS_CRG_CRPB_INIT 0xfffe
-#define CONFIG_SYS_CRG_CRHB_INIT 0xffff
-#define CONFIG_SYS_CRG_CRAM_INIT 0xffef
-
-/*
- * Memory controller settings
- */
-#define CONFIG_SYS_MEMC_MCFMODE0_INIT 0x00000001 /* 16bit */
-#define CONFIG_SYS_MEMC_MCFMODE2_INIT 0x00000001 /* 16bit */
-#define CONFIG_SYS_MEMC_MCFMODE4_INIT 0x00000021 /* 16bit, Page*/
-#define CONFIG_SYS_MEMC_MCFTIM0_INIT 0x16191008
-#define CONFIG_SYS_MEMC_MCFTIM2_INIT 0x03061008
-#define CONFIG_SYS_MEMC_MCFTIM4_INIT 0x03061804
-#define CONFIG_SYS_MEMC_MCFAREA0_INIT 0x000000c0 /* 0x0c000000 1MB */
-#define CONFIG_SYS_MEMC_MCFAREA2_INIT 0x00000020 /* 0x02000000 1MB */
-#define CONFIG_SYS_MEMC_MCFAREA4_INIT 0x001f0000 /* 0x10000000 32 MB */
-
-/*
- * DDR2 controller init settings
- */
-#define CONFIG_SYS_DDR2_DRIMS_INIT 0x5555
-#define CONFIG_SYS_CCNT_CDCRC_INIT_1 0x00000002
-#define CONFIG_SYS_CCNT_CDCRC_INIT_2 0x00000003
-#define CONFIG_SYS_DDR2_DRIC1_INIT 0x003f
-#define CONFIG_SYS_DDR2_DRIC2_INIT 0x0000
-#define CONFIG_SYS_DDR2_DRCA_INIT 0xc124 /* 512Mbit DDR2SDRAM x 2 */
-#define CONFIG_SYS_DDR2_DRCM_INIT 0x0032
-#define CONFIG_SYS_DDR2_DRCST1_INIT 0x3418
-#define CONFIG_SYS_DDR2_DRCST2_INIT 0x6e32
-#define CONFIG_SYS_DDR2_DRCR_INIT 0x0141
-#define CONFIG_SYS_DDR2_DRCF_INIT 0x0002
-#define CONFIG_SYS_DDR2_DRASR_INIT 0x0001
-#define CONFIG_SYS_DDR2_DROBS_INIT 0x0001
-#define CONFIG_SYS_DDR2_DROABA_INIT 0x0103
-#define CONFIG_SYS_DDR2_DRIBSODT1_INIT 0x003F
-#define CONFIG_SYS_DDR2_DROS_INIT 0x0001
-
-/*
- * DRAM init sequence
- */
-
-/* PALL Command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_1 0x0017
-#define CONFIG_SYS_DDR2_INIT_DRIC2_1 0x0400
-
-/* EMR(2) command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_2 0x0006
-#define CONFIG_SYS_DDR2_INIT_DRIC2_2 0x0000
-
-/* EMR(3) command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_3 0x0007
-#define CONFIG_SYS_DDR2_INIT_DRIC2_3 0x0000
-
-/* EMR(1) command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_4 0x0005
-#define CONFIG_SYS_DDR2_INIT_DRIC2_4 0x0000
-
-/* MRS command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_5 0x0004
-#define CONFIG_SYS_DDR2_INIT_DRIC2_5 0x0532
-
-/* PALL command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_6 0x0017
-#define CONFIG_SYS_DDR2_INIT_DRIC2_6 0x0400
-
-/* REF command 1 */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_7 0x000f
-#define CONFIG_SYS_DDR2_INIT_DRIC2_7 0x0000
-
-/* MRS command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_8 0x0004
-#define CONFIG_SYS_DDR2_INIT_DRIC2_8 0x0432
-
-/* EMR(1) command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_9 0x0005
-#define CONFIG_SYS_DDR2_INIT_DRIC2_9 0x0380
-
-/* EMR(1) command */
-#define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005
-#define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index f780f8b..2ed0855 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -195,7 +195,7 @@
}
#ifndef __ASSEMBLY__
-#include <asm/arch-kirkwood/gpio.h>
+#include <asm/arch/gpio.h>
extern void __set_direction(unsigned pin, int high);
void set_sda(int state);
void set_scl(int state);
diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index 14fd290..12f9d42 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -34,6 +34,8 @@
#define CONFIG_SYS_TEXT_BASE 0xFE000000
+#define CONFIG_MISC_INIT_R
+
/* include common defines/options for all Keymile boards */
#include "km/keymile-common.h"
#include "km/km-powerpc.h"
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 2874ccc..3dc4da3 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -510,6 +510,30 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0a0bb5f..a13876b 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -303,6 +303,30 @@
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 6fe032c..17a1cde 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -13,6 +13,7 @@
#define CONFIG_FSL_LSCH3
#define CONFIG_LS2085A
#define CONFIG_GICV3
+#define CONFIG_FSL_TZPC_BP147
/* Link Definitions */
#define CONFIG_SYS_TEXT_BASE 0x30001000
@@ -26,9 +27,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_IDENT_STRING " LS2085A-EMU"
-#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU"
-
/* Flat Device Tree Definitions */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
@@ -209,12 +207,10 @@
#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
#define CONFIG_SYS_LS_MC_FW_IN_NOR
#define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL
-/* TODO Actual FW length needs to be determined at runtime from FW header */
-#define CONFIG_SYS_LS_MC_FW_LENGTH (4U * 1024 * 1024)
#define CONFIG_SYS_LS_MC_DPL_IN_NOR
#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL
/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
-#define CONFIG_SYS_LS_MC_DPL_LENGTH 4096
+#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH (256 * 1024)
#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000
/* Carve the MC private DRAM block from the end of DRAM */
@@ -248,7 +244,8 @@
/* Physical Memory Map */
/* fixme: these need to be checked against the board */
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#define CONFIG_SYS_CLK_FREQ 133333333
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 133333333
#define CONFIG_NR_DRAM_BANKS 3
@@ -268,12 +265,14 @@
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581200000\0" \
- "kernel_load=0x806f0000\0" \
+ "kernel_load=0xa0000000\0" \
"kernel_size=0x1000000\0" \
"console=ttyAMA0,38400n8\0"
-#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
- "earlyprintk=uart8250-8bit,0x21c0600"
+#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
+ "earlycon=uart8250,mmio,0x21c0600,115200 " \
+ "default_hugepagesz=2m hugepagesz=2m " \
+ "hugepages=16"
#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
"$kernel_size && bootm $kernel_load"
#define CONFIG_BOOTDELAY 1
diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h
index 487cd99..a02d694 100644
--- a/include/configs/ls2085a_emu.h
+++ b/include/configs/ls2085a_emu.h
@@ -9,6 +9,9 @@
#include "ls2085a_common.h"
+#define CONFIG_IDENT_STRING " LS2085A-EMU"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU"
+
#define CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */
#define SPD_EEPROM_ADDRESS1 0x51
@@ -17,4 +20,5 @@
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
#define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */
+#define CONFIG_FSL_DDR_SYNC_REFRESH
#endif /* __LS2_EMU_H */
diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h
index 0f40b78..af34f3f 100644
--- a/include/configs/ls2085a_simu.h
+++ b/include/configs/ls2085a_simu.h
@@ -9,6 +9,9 @@
#include "ls2085a_common.h"
+#define CONFIG_IDENT_STRING " LS2085A-SIMU"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU"
+
/* SMSC 91C111 ethernet configuration */
#define CONFIG_SMC91111
#define CONFIG_SMC91111_BASE (0x2210000)
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index a14bfe3..c354c29 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -56,6 +56,7 @@
* Commands configuration
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_ENV
@@ -78,6 +79,9 @@
*/
#include "mv-common.h"
+/* loading initramfs images without uimage header */
+#define CONFIG_SUPPORT_RAW_INITRD
+
/* ST M25P40 */
#undef CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_STMICRO
@@ -125,27 +129,31 @@
"hdpart=0:1\0" \
"kernel_addr=0x00800000\0" \
"ramdisk_addr=0x01000000\0" \
- "fdt_addr=0x01ff0000\0" \
+ "fdt_addr=0x00ff0000\0" \
"bootcmd_legacy=ide reset " \
- "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \
- "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \
- "&& bootm 0x00100000 0x00800000\0" \
- "bootcmd_net=bootp ${kernel_addr} uImage " \
- "&& tftpboot ${ramdisk_addr} uInitrd " \
+ "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
+ "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+ "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "bootcmd_net=bootp ${kernel_addr} vmlinuz " \
+ "&& tftpboot ${ramdisk_addr} initrd.img " \
+ "&& setenv ramdisk_len ${filesize} " \
"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
- "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "&& bootz ${kernel_addr} " \
+ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_hdd=ide reset " \
- "&& load ide ${hdpart} ${kernel_addr} /uImage " \
- "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \
- "&& load ide ${hdpart} ${fdt_addr} " \
- "/" CONFIG_FDTFILE " " \
- "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
+ "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
+ "&& setenv ramdisk_len ${filesize} " \
+ "&& load ide ${hdpart} ${fdt_addr} /dtb " \
+ "&& bootz ${kernel_addr} " \
+ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_usb=usb start " \
- "&& load usb 0:1 ${kernel_addr} /uImage " \
- "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \
- "&& load usb 0:1 ${fdt_addr} " \
- "/" CONFIG_FDTFILE " " \
- "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "&& load usb 0:1 ${kernel_addr} /vmlinuz " \
+ "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
+ "&& setenv ramdisk_len ${filesize} " \
+ "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
+ "&& bootz ${kernel_addr} " \
+ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
"eraseenv=sf probe 0 " \
"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index fc7ecfa..2fd3add 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -157,7 +157,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
#define CONFIG_SYS_MALLOC_LEN (1024*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 0f4bd91..bed071f 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -14,6 +14,8 @@
/* High Level Configuration Options */
#define CONFIG_MX31 1 /* This is a mx31 */
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index e0528ce..29b72b2 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -28,6 +28,8 @@
#define CONFIG_SYS_PL310_BASE L2_PL310_BASE
#endif
+#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
+
#define CONFIG_MP
#define CONFIG_MXC_GPT_HCLK
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index f0f721e..4aa8101 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -25,9 +25,6 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
-#define CONFIG_DM
-#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_SYS_GENERIC_BOARD
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 404b922..a290129 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -227,9 +227,6 @@
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
-#define CONFIG_DM
-#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_CMD_FUSE
diff --git a/include/configs/novena.h b/include/configs/novena.h
index ea75d2c..074110c 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -116,7 +116,6 @@
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* SPL */
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 9d5dbdc..8b47537 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -177,8 +177,6 @@
/* I2C */
#define CONFIG_CMD_I2C
-#define CONFIG_DM_I2C
-#define CONFIG_DM_I2C_COMPAT
#define CONFIG_SYS_I2C_S3C24X0
#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 6295ec5..a5e7d8f 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -29,21 +29,24 @@
#define CONFIG_REVISION_TAG 1
-/* Status LED */
+/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
+#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
#define RED_LED_GPIO 27
-#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define RED_LED_GPIO 16
+#else
+#error "status LED not defined for this machine."
#endif
#define RED_LED_DEV 0
#define STATUS_LED_BIT RED_LED_GPIO
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT RED_LED_DEV
+#endif
/* GPIO banks */
#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h
index a1c980d..f04f061 100644
--- a/include/configs/peach-pi.h
+++ b/include/configs/peach-pi.h
@@ -43,8 +43,6 @@
#endif
#define CONFIG_POWER_TPS65090_EC
-#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
-#define CONFIG_DM_CROS_EC
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_EXYNOS
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 6516a72..b5efbdc 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -43,8 +43,6 @@
#endif
#define CONFIG_POWER_TPS65090_EC
-#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
-#define CONFIG_DM_CROS_EC
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_EXYNOS
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
new file mode 100644
index 0000000..3121ac9
--- /dev/null
+++ b/include/configs/rpi-common.h
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _RPI_COMMON_H_
+#define _RPI_COMMON_H_
+
+#include <linux/sizes.h>
+
+/* Architecture, CPU, etc.*/
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BCM2835
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_DCACHE_OFF
+/*
+ * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
+ * so 2708 has historically been used rather than a dedicated 2835 ID.
+ *
+ * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
+ * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
+ * rather than obtaining a valid ID:-/
+ */
+#ifndef CONFIG_BCM2836
+#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
+#endif
+
+/* Memory layout */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_TEXT_BASE 0x00008000
+#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+/*
+ * The board really has 256M. However, the VC (VideoCore co-processor) shares
+ * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
+ * smaller amount of RAM is present in order to avoid stomping on the area
+ * the VC uses.
+ */
+#define CONFIG_SYS_SDRAM_SIZE SZ_128M
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_SDRAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_MALLOC_LEN SZ_4M
+#define CONFIG_SYS_MEMTEST_START 0x00100000
+#define CONFIG_SYS_MEMTEST_END 0x00200000
+#define CONFIG_LOADADDR 0x00200000
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Devices */
+/* GPIO */
+#define CONFIG_BCM2835_GPIO
+/* LCD */
+#define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
+#define LCD_BPP LCD_COLOR16
+/*
+ * Prevent allocation of RAM for FB; the real FB address is queried
+ * dynamically from the VideoCore co-processor, and comes from RAM
+ * not owned by the ARM CPU.
+ */
+#define CONFIG_FB_ADDR 0
+#define CONFIG_VIDEO_BCM2835
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_BCM2835_SDHCI
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#ifdef CONFIG_BCM2836
+#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000
+#else
+#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
+#endif
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MISC_INIT_R
+#endif
+
+/* Console UART */
+#define CONFIG_PL01X_SERIAL
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200
+
+/* Console configuration */
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Environment */
+#define CONFIG_ENV_SIZE SZ_16K
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_DEVICE_AND_PART "0:1"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_SYS_LOAD_ADDR 0x1000000
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Shell */
+#define CONFIG_SYS_MAXARGS 8
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_COMMAND_HISTORY
+
+/* Commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* Device tree support */
+#define CONFIG_OF_BOARD_SETUP
+/* ATAGs support for bootm/bootz */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+#include <config_distro_defaults.h>
+
+/* Some things don't make sense on this HW or yet */
+#undef CONFIG_CMD_FPGA
+
+/* Environment */
+#define ENV_DEVICE_SETTINGS \
+ "stdin=serial,lcd\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it low in memory to avoid conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it low in memory to avoid conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "scriptaddr=0x00000000\0" \
+ "pxefile_addr_r=0x00100000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_DEVICE_SETTINGS \
+ ENV_MEM_LAYOUT_SETTINGS \
+ BOOTENV
+
+#define CONFIG_BOOTDELAY 2
+
+#endif
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index c94f411..ab2f4db 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -1,193 +1,12 @@
/*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <linux/sizes.h>
-
-/* Architecture, CPU, etc.*/
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_BCM2835
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_DCACHE_OFF
-/*
- * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
- * so 2708 has historically been used rather than a dedicated 2835 ID.
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
-
-/* Enable driver model */
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-
-/* Memory layout */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_TEXT_BASE 0x00008000
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
-/*
- * The board really has 256M. However, the VC (VideoCore co-processor) shares
- * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
- * smaller amount of RAM is present in order to avoid stomping on the area
- * the VC uses.
- */
-#define CONFIG_SYS_SDRAM_SIZE SZ_128M
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_SDRAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN SZ_4M
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x00200000
-#define CONFIG_LOADADDR 0x00200000
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Devices */
-/* GPIO */
-#define CONFIG_BCM2835_GPIO
-/* LCD */
-#define CONFIG_LCD
-#define CONFIG_LCD_DT_SIMPLEFB
-#define LCD_BPP LCD_COLOR16
-/*
- * Prevent allocation of RAM for FB; the real FB address is queried
- * dynamically from the VideoCore co-processor, and comes from RAM
- * not owned by the ARM CPU.
- */
-#define CONFIG_FB_ADDR 0
-#define CONFIG_VIDEO_BCM2835
-#define CONFIG_SYS_WHITE_ON_BLACK
-
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDHCI_IO_ACCESSORS
-#define CONFIG_BCM2835_SDHCI
-
-#define CONFIG_CMD_USB
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
-#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MISC_INIT_R
-#endif
-
-/* Console UART */
-#define CONFIG_PL01X_SERIAL
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
-
-/* Console configuration */
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Environment */
-#define CONFIG_ENV_SIZE SZ_16K
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE "mmc"
-#define FAT_ENV_DEVICE_AND_PART "0:1"
-#define FAT_ENV_FILE "uboot.env"
-#define CONFIG_FAT_WRITE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_SYS_LOAD_ADDR 0x1000000
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Shell */
-#define CONFIG_SYS_MAXARGS 8
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_COMMAND_HISTORY
-
-/* Commands */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MMC
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
-/* Device tree support */
-#define CONFIG_OF_BOARD_SETUP
-/* ATAGs support for bootm/bootz */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-
-#include <config_distro_defaults.h>
-
-/* Some things don't make sense on this HW or yet */
-#undef CONFIG_CMD_FPGA
-
-/* Environment */
-#define ENV_DEVICE_SETTINGS \
- "stdin=serial,lcd\0" \
- "stdout=serial,lcd\0" \
- "stderr=serial,lcd\0"
-
-/*
- * Memory layout for where various images get loaded by boot scripts:
- *
- * scriptaddr can be pretty much anywhere that doesn't conflict with something
- * else. Put it low in memory to avoid conflicts.
- *
- * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
- * something else. Put it low in memory to avoid conflicts.
- *
- * kernel_addr_r must be within the first 128M of RAM in order for the
- * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
- * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
- * should not overlap that area, or the kernel will have to copy itself
- * somewhere else before decompression. Similarly, the address of any other
- * data passed to the kernel shouldn't overlap the start of RAM. Pushing
- * this up to 16M allows for a sizable kernel to be decompressed below the
- * compressed load address.
- *
- * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
- * the compressed kernel to be up to 16M too.
- *
- * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
- * for the FDT/DTB to be up to 1M, which is hopefully plenty.
- */
-#define ENV_MEM_LAYOUT_SETTINGS \
- "scriptaddr=0x00000000\0" \
- "pxefile_addr_r=0x00100000\0" \
- "kernel_addr_r=0x01000000\0" \
- "fdt_addr_r=0x02000000\0" \
- "ramdisk_addr_r=0x02100000\0" \
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(USB, usb, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- ENV_DEVICE_SETTINGS \
- ENV_MEM_LAYOUT_SETTINGS \
- BOOTENV
-
-#define CONFIG_BOOTDELAY 2
+#include "rpi-common.h"
#endif
diff --git a/include/configs/rpi_2.h b/include/configs/rpi_2.h
new file mode 100644
index 0000000..2e7e74f
--- /dev/null
+++ b/include/configs/rpi_2.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BCM2836
+
+#include "rpi-common.h"
+
+#endif
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index dfa2e07..8fadc68 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -40,7 +40,6 @@
#define CONFIG_CMDLINE_EDITING
/* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/*
@@ -290,9 +289,5 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
#endif /* __CONFIG_H */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 5a0ab28..5dab61d 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -227,7 +227,7 @@
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index cccc1ed..bd288be 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -274,7 +274,7 @@
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index e9d3f32..febbfb6 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -23,15 +23,6 @@
#define CONFIG_BOOTSTAGE
#define CONFIG_BOOTSTAGE_REPORT
-#define CONFIG_CMD_DEMO
-#define CONFIG_CMD_DM
-#define CONFIG_DM_DEMO
-#define CONFIG_DM_DEMO_SIMPLE
-#define CONFIG_DM_DEMO_SHAPE
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_TEST
-#define CONFIG_DM_SERIAL
-#define CONFIG_DM_CROS_EC
#define CONFIG_SYS_STDIO_DEREGISTER
@@ -69,7 +60,6 @@
/*
* Size of malloc() pool, before and after relocation
*/
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_MALLOC_F_ADDR 0x0010000
#define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */
@@ -96,8 +86,6 @@
#define CONFIG_CMD_SF_TEST
#define CONFIG_CMD_SPI
#define CONFIG_SPI_FLASH
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SPI_FLASH_EON
#define CONFIG_SPI_FLASH_GIGADEVICE
@@ -108,7 +96,6 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_DM_I2C
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C_SANDBOX
#define CONFIG_I2C_EDID
@@ -154,9 +141,6 @@
#define CONFIG_BOOTARGS ""
-#define CONFIG_CROS_EC
-#define CONFIG_CMD_CROS_EC
-#define CONFIG_CROS_EC_SANDBOX
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT
@@ -179,7 +163,6 @@
#define LCD_BPP LCD_COLOR16
#define CONFIG_LCD_BMP_RLE8
-#define CONFIG_CROS_EC_KEYB
#define CONFIG_KEYBOARD
#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \
diff --git a/include/configs/silk.h b/include/configs/silk.h
new file mode 100644
index 0000000..a4235e9
--- /dev/null
+++ b/include/configs/silk.h
@@ -0,0 +1,117 @@
+/*
+ * include/configs/silk.h
+ * This file is silk board configuration.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __SILK_H
+#define __SILK_H
+
+#undef DEBUG
+#define CONFIG_R8A7794
+#define CONFIG_RMOBILE_BOARD_STRING "Silk"
+
+#include "rcar-gen2-common.h"
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_TEXT_BASE 0x70000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0xE6304000
+#endif
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
+#else
+#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
+#endif
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define RCAR_GEN2_SDRAM_BASE 0x40000000
+#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SCIF_USE_EXT_CLK
+
+/* FLASH */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_QUAD
+#define CONFIG_SYS_NO_FLASH
+
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* Board Clock */
+#define RMOBILE_XTAL_CLK 20000000u
+#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
+#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
+#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */
+
+#define CONFIG_SYS_TMU_CLK_DIV 4
+
+/* i2c */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
+#define CONFIG_SYS_I2C_SH_SPEED0 400000
+#define CONFIG_SYS_I2C_SH_SPEED1 400000
+#define CONFIG_SYS_I2C_SH_SPEED2 400000
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
+
+/* USB */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_RMOBILE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+/* MMCIF */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SH_MMCIF
+#define CONFIG_SH_MMCIF_ADDR 0xee200000
+#define CONFIG_SH_MMCIF_CLK 48000000
+
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA 0x00400000
+/* MSIF */
+#define CONFIG_SMSTP2_ENA 0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+/* SCIF2 */
+#define CONFIG_SMSTP7_ENA 0x00080000
+
+#endif /* __SILK_H */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 982d0dc..080fc3a 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -48,9 +48,6 @@
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-/* Small malloc pool before relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
-
/*
* select serial console configuration
*/
@@ -224,9 +221,5 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
#endif /* __CONFIG_H */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 9fa644f..6c68596 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -21,11 +21,6 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* CPU */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/snow.h b/include/configs/snow.h
index ce6676e..fe802f2 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -20,9 +20,7 @@
#include <configs/exynos5-dt-common.h>
-#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
#define CONFIG_POWER_TPS65090_I2C
-#define CONFIG_DM_CROS_EC
#define CONFIG_BOARD_COMMON
#define CONFIG_ARCH_EARLY_INIT_R
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 6b1f967..ee227fe 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -190,10 +190,6 @@ unsigned int cm_get_l4_sp_clk_hz(void);
* QSPI support
*/
#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */
-#define CONFIG_CMD_DM
-#define CONFIG_DM
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
#define CONFIG_CADENCE_QSPI
/* Enable multiple SPI NOR flash manufacturers */
#define CONFIG_SPI_FLASH /* SPI flash subsystem */
@@ -210,9 +206,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#endif
#ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */
-#define CONFIG_CMD_DM
-#define CONFIG_DM
-#define CONFIG_DM_SPI
#define CONFIG_DESIGNWARE_SPI
#define CONFIG_CMD_SPI
#endif
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index fd9bd63..156e0fa 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -28,21 +28,10 @@
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-#define CONFIG_DM
/* serial port (PL011) configuration */
#define CONFIG_BAUDRATE 115200
-#ifdef CONFIG_DM
-#define CONFIG_DM_SERIAL
#define CONFIG_PL01X_SERIAL
-#else
-#define CONFIG_SYS_SERIAL0 0x80406000
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
-#define CONFIG_PL011_CLOCK (2700 * 1000)
-#endif
/* user interface */
#define CONFIG_SYS_PROMPT "STV0991> "
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index 87d269b..1537e53 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -13,8 +13,6 @@
*/
#define CONFIG_CLK_FULL_SPEED 1008000000
-#define CONFIG_MACH_TYPE 4104
-
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
@@ -25,4 +23,6 @@
*/
#include <configs/sunxi-common.h>
+#define CONFIG_MACH_TYPE (4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
index 52e3a6f..e755531 100644
--- a/include/configs/sun5i.h
+++ b/include/configs/sun5i.h
@@ -13,8 +13,6 @@
*/
#define CONFIG_CLK_FULL_SPEED 1008000000
-#define CONFIG_MACH_TYPE 4138
-
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
@@ -25,4 +23,6 @@
*/
#include <configs/sunxi-common.h>
+#define CONFIG_MACH_TYPE (4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 7cd7890..f817f73 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -14,8 +14,6 @@
*/
#define CONFIG_CLK_FULL_SPEED 912000000
-#define CONFIG_MACH_TYPE 4283
-
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
@@ -31,4 +29,6 @@
*/
#include <configs/sunxi-common.h>
+#define CONFIG_MACH_TYPE (4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index cea52db..bd7d049 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -13,26 +13,36 @@
#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+/*
+ * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
+ * expense of restricting some features, so the regular machine id values can
+ * be used.
+ */
+# define CONFIG_MACH_TYPE_COMPAT_REV 0
+#else
+/*
+ * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
+ * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
+ * beyond the machine id check.
+ */
+# define CONFIG_MACH_TYPE_COMPAT_REV 1
+#endif
+
/*
* High Level Configuration Options
*/
#define CONFIG_SUNXI /* sunxi family */
#ifdef CONFIG_SPL_BUILD
-#ifndef CONFIG_SPL_FEL
#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */
#endif
-#endif
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_SYS_TEXT_BASE 0x4a000000
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
# define CONFIG_DW_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/*
@@ -85,9 +95,6 @@
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_SETEXPR
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
@@ -149,10 +156,10 @@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_BOARD_LOAD_IMAGE
+
#ifdef CONFIG_SPL_FEL
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
#define CONFIG_SPL_TEXT_BASE 0x2000
#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */
@@ -192,6 +199,22 @@
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x7f
+
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+#define CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
+#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */
+/* We use pin names in Kconfig and sunxi_name_to_gpio() */
+#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
+#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl
+#ifndef __ASSEMBLY__
+extern int soft_i2c_gpio_sda;
+extern int soft_i2c_gpio_scl;
+#endif
+#endif
+
#define CONFIG_CMD_I2C
/* PMU */
@@ -203,6 +226,20 @@
#define CONFIG_CONS_INDEX 1 /* UART0 */
#endif
+#if CONFIG_CONS_INDEX == 1
+#ifdef CONFIG_MACH_SUN9I
+#define OF_STDOUT_PATH "/soc/serial@07000000:115200"
+#else
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200"
+#endif
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200"
+#else
+#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
+#endif
+
/* GPIO */
#define CONFIG_SUNXI_GPIO
#define CONFIG_SPL_GPIO_SUPPORT
@@ -210,10 +247,10 @@
#ifdef CONFIG_VIDEO
/*
- * The amount of RAM that is reserved for the FB. This will not show up as
- * RAM to the kernel, but will be reclaimed by a KMS driver in future.
+ * The amount of RAM to keep free at the top of RAM when relocating u-boot,
+ * to use as framebuffer. This must be a multiple of 4096.
*/
-#define CONFIG_SUNXI_FB_SIZE (9 << 20)
+#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20)
/* Do we want to initialize a simple FB? */
#define CONFIG_VIDEO_DT_SIMPLEFB
@@ -231,8 +268,6 @@
/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
-
/* To be able to hook simplefb into dt */
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
#define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 8f1e370..005fc6a 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -18,16 +18,6 @@
#include <asm/arch/tegra.h> /* get chip and board defs */
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_SERIAL
-#endif
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
-#define CONFIG_DM_I2C
-
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
@@ -47,7 +37,6 @@
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 598526b..20a55f4 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -20,14 +20,7 @@
#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#ifndef CONFIG_SPL_BUILD
-#ifndef CONFIG_DM
-# define CONFIG_DM
-#endif
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
# define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
#include <asm/arch/omap.h>
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 3c634ee..840e108 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -19,12 +19,7 @@
#include <asm/arch/omap3.h>
#ifndef CONFIG_SPL_BUILD
-# define CONFIG_DM
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
# define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* The chip has SDRC controller */
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
deleted file mode 100644
index 00a1a9e..0000000
--- a/include/configs/tnetv107x_evm.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/sizes.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-
-/* Architecture, CPU, etc */
-#define CONFIG_TNETV107X
-#define CONFIG_TNETV107X_EVM
-#define CONFIG_TNETV107X_WATCHDOG
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_DISABLE_TCM
-#define CONFIG_PERIPORT_REMAP
-#define CONFIG_PERIPORT_BASE 0x2000000
-#define CONFIG_PERIPORT_SIZE 0x10
-#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM)
-
-#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0)
-
-#define CONFIG_PLL_SYS_EXT_FREQ 25000000
-#define CONFIG_PLL_TDM_EXT_FREQ 19200000
-#define CONFIG_PLL_ETH_EXT_FREQ 25000000
-
-/* Memory Info */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024)
-#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE
-#define PHYS_SDRAM_1_SIZE 0x04000000
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024)
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* Serial Driver Info */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1)
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* Flash and environment info */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE (SZ_128K)
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_NAND_1BIT_ECC
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
-#define CONFIG_SYS_NAND_MASK_CLE 0x10
-#define CONFIG_SYS_NAND_MASK_ALE 0x8
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_JFFS2_NAND
-#define CONFIG_ENV_OFFSET 0x180000
-
-/*
- * davinci_nand is a bit of a misnomer since this particular EMIF block is
- * commonly used across multiple TI devices. Unfortunately, this misnomer
- * (amongst others) carries forward into the kernel too. Consequently, if we
- * use a different device name here, the mtdparts variable won't be usable as
- * a kernel command-line argument.
- */
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
- "1536k(uboot)ro," \
- "128k(params)ro," \
- "4m(kernel)," \
- "-(filesystem)"
-
-/* General U-Boot configuration */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_SYS_PROMPT "U-Boot > "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \
- 0x700000)
-#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \
- "root=/dev/mmcblk0p1 rw noinitrd"
-#define CONFIG_BOOTCOMMAND ""
-#define CONFIG_BOOTDELAY 1
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SOURCE
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 9420e6b..3f738fb 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -80,8 +80,6 @@
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/
@@ -192,8 +190,6 @@
#define CONFIG_FAT_WRITE
#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_DM
-
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 062e6c2..994874c 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -22,11 +22,6 @@
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-
#define CONFIG_LMB
#define CONFIG_OF_LIBFDT
@@ -192,7 +187,6 @@
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x200000
-#define CONFIG_SYS_MALLOC_F_LEN (2 << 10)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 356ac88..342fa2c 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -15,6 +15,8 @@
#define CONFIG_MX25
#define CONFIG_SYS_TEXT_BASE 0xA0000000
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_SYS_TIMER_RATE 32768
#define CONFIG_SYS_TIMER_COUNTER \
(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
diff --git a/include/debug_uart.h b/include/debug_uart.h
new file mode 100644
index 0000000..f56797b
--- /dev/null
+++ b/include/debug_uart.h
@@ -0,0 +1,139 @@
+/*
+ * Early debug UART support
+ *
+ * (C) Copyright 2014 Google, Inc
+ * Writte by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DEBUG_UART_H
+#define _DEBUG_UART_H
+
+#include <linux/linkage.h>
+
+/*
+ * The debug UART is intended for use very early in U-Boot to debug problems
+ * when an ICE or other debug mechanism is not available.
+ *
+ * To use it you should:
+ * - Make sure your UART supports this interface
+ * - Enable CONFIG_DEBUG_UART
+ * - Enable the CONFIG for your UART to tell it to provide this interface
+ * (e.g. CONFIG_DEBUG_UART_NS16550)
+ * - Define the required settings as needed (see below)
+ * - Call debug_uart_init() before use
+ * - Call printch() to output a character
+ *
+ * Depending on your platform it may be possible to use this UART before a
+ * stack is available.
+ *
+ * If your UART does not support this interface you can probably add support
+ * quite easily. Remember that you cannot use driver model and it is preferred
+ * to use no stack.
+ *
+ * You must not use this UART once driver model is working and the serial
+ * drivers are up and running (done in serial_init()). Otherwise the drivers
+ * may conflict and you will get strange output.
+ *
+ *
+ * To enable the debug UART in your serial driver:
+ *
+ * - #include <debug_uart.h>
+ * - Define debug_uart_init(), trying to avoid using the stack
+ * - Define _debug_uart_putc() as static inline (avoiding stack usage)
+ * - Immediately afterwards, add DEBUG_UART_FUNCS to define the rest of the
+ * functionality (printch(), etc.)
+ */
+
+/**
+ * debug_uart_init() - Set up the debug UART ready for use
+ *
+ * This sets up the UART with the correct baud rate, etc.
+ *
+ * Available CONFIG is:
+ *
+ * - CONFIG_DEBUG_UART_BASE: Base address of UART
+ * - CONFIG_BAUDRATE: Requested baud rate
+ * - CONFIG_DEBUG_UART_CLOCK: Input clock for UART
+ */
+void debug_uart_init(void);
+
+/**
+ * printch() - Output a character to the debug UART
+ *
+ * @ch: Character to output
+ */
+asmlinkage void printch(int ch);
+
+/**
+ * printascii() - Output an ASCII string to the debug UART
+ *
+ * @str: String to output
+ */
+asmlinkage void printascii(const char *str);
+
+/**
+ * printhex2() - Output a 2-digit hex value
+ *
+ * @value: Value to output
+ */
+asmlinkage void printhex2(uint value);
+
+/**
+ * printhex4() - Output a 4-digit hex value
+ *
+ * @value: Value to output
+ */
+asmlinkage void printhex4(uint value);
+
+/**
+ * printhex8() - Output a 8-digit hex value
+ *
+ * @value: Value to output
+ */
+asmlinkage void printhex8(uint value);
+
+/*
+ * Now define some functions - this should be inserted into the serial driver
+ */
+#define DEBUG_UART_FUNCS \
+ asmlinkage void printch(int ch) \
+ { \
+ _debug_uart_putc(ch); \
+ } \
+\
+ asmlinkage void printascii(const char *str) \
+ { \
+ while (*str) \
+ _debug_uart_putc(*str++); \
+ } \
+\
+ static inline void printhex1(uint digit) \
+ { \
+ digit &= 0xf; \
+ _debug_uart_putc(digit > 9 ? digit - 10 + 'a' : digit + '0'); \
+ } \
+\
+ static inline void printhex(uint value, int digits) \
+ { \
+ while (digits-- > 0) \
+ printhex1(value >> (4 * digits)); \
+ } \
+\
+ asmlinkage void printhex2(uint value) \
+ { \
+ printhex(value, 2); \
+ } \
+\
+ asmlinkage void printhex4(uint value) \
+ { \
+ printhex(value, 4); \
+ } \
+\
+ asmlinkage void printhex8(uint value) \
+ { \
+ printhex(value, 8); \
+ }
+
+#endif
diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h
index f0cc794..e2418fe 100644
--- a/include/dm/device-internal.h
+++ b/include/dm/device-internal.h
@@ -101,7 +101,11 @@ static inline int device_remove(struct udevice *dev) { return 0; }
* @dev: Pointer to device to unbind
* @return 0 if OK, -ve on error
*/
+#ifdef CONFIG_DM_DEVICE_REMOVE
int device_unbind(struct udevice *dev);
+#else
+static inline int device_unbind(struct udevice *dev) { return 0; }
+#endif
#ifdef CONFIG_DM_DEVICE_REMOVE
void device_free(struct udevice *dev);
diff --git a/include/dm/device.h b/include/dm/device.h
index 81afa8c..7a48eb8 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -12,6 +12,7 @@
#define _DM_DEVICE_H
#include <dm/uclass-id.h>
+#include <fdtdec.h>
#include <linker_lists.h>
#include <linux/list.h>
@@ -351,4 +352,13 @@ int device_find_first_child(struct udevice *parent, struct udevice **devp);
*/
int device_find_next_child(struct udevice **devp);
+/**
+ * dev_get_addr() - Get the reg property of a device
+ *
+ * @dev: Pointer to a device
+ *
+ * @return addr
+ */
+fdt_addr_t dev_get_addr(struct udevice *dev);
+
#endif
diff --git a/include/dm/platform_data/serial_sh.h b/include/dm/platform_data/serial_sh.h
new file mode 100644
index 0000000..0271ad6
--- /dev/null
+++ b/include/dm/platform_data/serial_sh.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (c) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __serial_sh_h
+#define __serial_sh_h
+
+enum sh_clk_mode {
+ INT_CLK,
+ EXT_CLK,
+};
+
+enum sh_serial_type {
+ PORT_SCI,
+ PORT_SCIF,
+ PORT_SCIFA,
+ PORT_SCIFB,
+};
+
+/*
+ * Information about SCIF port
+ *
+ * @base: Register base address
+ * @clk: Input clock rate, used for calculating the baud rate divisor
+ * @clk_mode: Clock mode, set internal (INT) or external (EXT)
+ * @type: Type of SCIF
+ */
+struct sh_serial_platdata {
+ unsigned long base;
+ unsigned int clk;
+ enum sh_clk_mode clk_mode;
+ enum sh_serial_type type;
+};
+#endif /* __serial_sh_h */
diff --git a/include/dwmmc.h b/include/dwmmc.h
index 109f7c8..86a5491 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -141,9 +141,9 @@ struct dwmci_host {
int dev_index;
int dev_id;
int buswidth;
- u32 clksel_val;
u32 fifoth_val;
struct mmc *mmc;
+ void *priv;
void (*clksel)(struct dwmci_host *host);
void (*board_init)(struct dwmci_host *host);
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 1f19fe4..ae5e8a3 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -100,7 +100,7 @@ void ft_pci_setup(void *blob, bd_t *bd);
*/
int ft_system_setup(void *blob, bd_t *bd);
-void set_working_fdt_addr(void *addr);
+void set_working_fdt_addr(ulong addr);
int fdt_shrink_to_minimum(void *blob);
int fdt_increase_size(void *fdt, int add_len);
diff --git a/include/fsl-mc/fsl_dpmng.h b/include/fsl-mc/fsl_dpmng.h
new file mode 100644
index 0000000..c2e1ddd
--- /dev/null
+++ b/include/fsl-mc/fsl_dpmng.h
@@ -0,0 +1,121 @@
+/* Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/*!
+ * @file fsl_dpmng.h
+ * @brief Management Complex General API
+ */
+
+#ifndef __FSL_DPMNG_H
+#define __FSL_DPMNG_H
+
+/*!
+ * @Group grp_dpmng Management Complex General API
+ *
+ * @brief Contains general API for the Management Complex firmware
+ * @{
+ */
+
+struct fsl_mc_io;
+
+/**
+ * @brief Management Complex firmware version information
+ */
+#define MC_VER_MAJOR 4
+#define MC_VER_MINOR 0
+
+struct mc_version {
+ uint32_t major;
+ /*!< Major version number: incremented on API compatibility changes */
+ uint32_t minor;
+ /*!< Minor version number: incremented on API additions (that are
+ * backward compatible); reset when major version is incremented
+ */
+ uint32_t revision;
+ /*!< Internal revision number: incremented on implementation changes
+ * and/or bug fixes that have no impact on API
+ */
+};
+
+/**
+ * @brief Retrieves the Management Complex firmware version information
+ *
+ * @param[in] mc_io Pointer to opaque I/O object
+ * @param[out] mc_ver_info Pointer to version information structure
+ *
+ * @returns '0' on Success; Error code otherwise.
+ */
+int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info);
+
+/**
+ * @brief Resets an AIOP tile
+ *
+ * @param[in] mc_io Pointer to opaque I/O object
+ * @param[in] container_id AIOP container ID
+ * @param[in] aiop_tile_id AIOP tile ID to reset
+ *
+ * @returns '0' on Success; Error code otherwise.
+ */
+int dpmng_reset_aiop(struct fsl_mc_io *mc_io,
+ int container_id,
+ int aiop_tile_id);
+
+/**
+ * @brief Loads an image to AIOP tile
+ *
+ * @param[in] mc_io Pointer to opaque I/O object
+ * @param[in] container_id AIOP container ID
+ * @param[in] aiop_tile_id AIOP tile ID to reset
+ * @param[in] img_iova I/O virtual address of AIOP ELF image
+ * @param[in] img_size Size of AIOP ELF image in memory (in bytes)
+ *
+ * @returns '0' on Success; Error code otherwise.
+ */
+int dpmng_load_aiop(struct fsl_mc_io *mc_io,
+ int container_id,
+ int aiop_tile_id,
+ uint64_t img_iova,
+ uint32_t img_size);
+
+/**
+ * @brief AIOP run configuration
+ */
+struct dpmng_aiop_run_cfg {
+ uint32_t cores_mask;
+ /*!< Mask of AIOP cores to run (core 0 in most significant bit) */
+ uint64_t options;
+ /*!< Execution options (currently none defined) */
+};
+
+/**
+ * @brief Starts AIOP tile execution
+ *
+ * @param[in] mc_io Pointer to MC portal's I/O object
+ * @param[in] container_id AIOP container ID
+ * @param[in] aiop_tile_id AIOP tile ID to reset
+ * @param[in] cfg AIOP run configuration
+ *
+ * @returns '0' on Success; Error code otherwise.
+ */
+int dpmng_run_aiop(struct fsl_mc_io *mc_io,
+ int container_id,
+ int aiop_tile_id,
+ const struct dpmng_aiop_run_cfg *cfg);
+
+/**
+ * @brief Resets MC portal
+ *
+ * This function closes all object handles (tokens) that are currently
+ * open in the MC portal on which the command is submitted. This allows
+ * cleanup of stale handles that belong to non-functional user processes.
+ *
+ * @param[in] mc_io Pointer to MC portal's I/O object
+ *
+ * @returns '0' on Success; Error code otherwise.
+ */
+int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io);
+
+/** @} */
+
+#endif /* __FSL_DPMNG_H */
diff --git a/include/fsl_mc.h b/include/fsl-mc/fsl_mc.h
index b9f089e..b9f089e 100644
--- a/include/fsl_mc.h
+++ b/include/fsl-mc/fsl_mc.h
diff --git a/include/fsl-mc/fsl_mc_cmd.h b/include/fsl-mc/fsl_mc_cmd.h
new file mode 100644
index 0000000..e7fcb5b
--- /dev/null
+++ b/include/fsl-mc/fsl_mc_cmd.h
@@ -0,0 +1,132 @@
+/* Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef __FSL_MC_CMD_H
+#define __FSL_MC_CMD_H
+
+#define MC_CMD_NUM_OF_PARAMS 7
+
+#define MAKE_UMASK64(_width) \
+ ((uint64_t)((_width) < 64 ? ((uint64_t)1 << (_width)) - 1 : -1))
+
+static inline uint64_t u64_enc(int lsoffset, int width, uint64_t val)
+{
+ return (uint64_t)(((uint64_t)val & MAKE_UMASK64(width)) << lsoffset);
+}
+static inline uint64_t u64_dec(uint64_t val, int lsoffset, int width)
+{
+ return (uint64_t)((val >> lsoffset) & MAKE_UMASK64(width));
+}
+
+struct mc_command {
+ uint64_t header;
+ uint64_t params[MC_CMD_NUM_OF_PARAMS];
+};
+
+enum mc_cmd_status {
+ MC_CMD_STATUS_OK = 0x0, /*!< Completed successfully */
+ MC_CMD_STATUS_READY = 0x1, /*!< Ready to be processed */
+ MC_CMD_STATUS_AUTH_ERR = 0x3, /*!< Authentication error */
+ MC_CMD_STATUS_NO_PRIVILEGE = 0x4, /*!< No privilege */
+ MC_CMD_STATUS_DMA_ERR = 0x5, /*!< DMA or I/O error */
+ MC_CMD_STATUS_CONFIG_ERR = 0x6, /*!< Configuration error */
+ MC_CMD_STATUS_TIMEOUT = 0x7, /*!< Operation timed out */
+ MC_CMD_STATUS_NO_RESOURCE = 0x8, /*!< No resources */
+ MC_CMD_STATUS_NO_MEMORY = 0x9, /*!< No memory available */
+ MC_CMD_STATUS_BUSY = 0xA, /*!< Device is busy */
+ MC_CMD_STATUS_UNSUPPORTED_OP = 0xB, /*!< Unsupported operation */
+ MC_CMD_STATUS_INVALID_STATE = 0xC /*!< Invalid state */
+};
+
+#define MC_CMD_HDR_CMDID_O 52 /* Command ID field offset */
+#define MC_CMD_HDR_CMDID_S 12 /* Command ID field size */
+#define MC_CMD_HDR_AUTHID_O 38 /* Authentication ID field offset */
+#define MC_CMD_HDR_AUTHID_S 10 /* Authentication ID field size */
+#define MC_CMD_HDR_STATUS_O 16 /* Status field offset */
+#define MC_CMD_HDR_STATUS_S 8 /* Status field size*/
+#define MC_CMD_HDR_PRI_O 15 /* Priority field offset */
+#define MC_CMD_HDR_PRI_S 1 /* Priority field size */
+
+#define MC_CMD_HDR_READ_STATUS(_hdr) \
+ ((enum mc_cmd_status)u64_dec((_hdr), \
+ MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S))
+
+#define MC_CMD_HDR_READ_AUTHID(_hdr) \
+ ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S))
+
+#define MC_CMD_PRI_LOW 0 /*!< Low Priority command indication */
+#define MC_CMD_PRI_HIGH 1 /*!< High Priority command indication */
+
+#define MC_CMD_OP(_cmd, _param, _offset, _width, _type, _arg) \
+ ((_cmd).params[_param] |= u64_enc((_offset), (_width), _arg))
+
+#define MC_RSP_OP(_cmd, _param, _offset, _width, _type, _arg) \
+ (_arg = (_type)u64_dec(_cmd.params[_param], (_offset), (_width)))
+
+static inline uint64_t mc_encode_cmd_header(uint16_t cmd_id,
+ uint8_t priority,
+ uint16_t auth_id)
+{
+ uint64_t hdr;
+
+ hdr = u64_enc(MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S, cmd_id);
+ hdr |= u64_enc(MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S, auth_id);
+ hdr |= u64_enc(MC_CMD_HDR_PRI_O, MC_CMD_HDR_PRI_S, priority);
+ hdr |= u64_enc(MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S,
+ MC_CMD_STATUS_READY);
+
+ return hdr;
+}
+
+/**
+ * mc_write_command - writes a command to a Management Complex (MC) portal
+ *
+ * @portal: pointer to an MC portal
+ * @cmd: pointer to a filled command
+ */
+static inline void mc_write_command(struct mc_command __iomem *portal,
+ struct mc_command *cmd)
+{
+ int i;
+
+ /* copy command parameters into the portal */
+ for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++)
+ writeq(cmd->params[i], &portal->params[i]);
+
+ /* submit the command by writing the header */
+ writeq(cmd->header, &portal->header);
+}
+
+/**
+ * mc_read_response - reads the response for the last MC command from a
+ * Management Complex (MC) portal
+ *
+ * @portal: pointer to an MC portal
+ * @resp: pointer to command response buffer
+ *
+ * Returns MC_CMD_STATUS_OK on Success; Error code otherwise.
+ */
+static inline enum mc_cmd_status mc_read_response(
+ struct mc_command __iomem *portal,
+ struct mc_command *resp)
+{
+ int i;
+ enum mc_cmd_status status;
+
+ /* Copy command response header from MC portal: */
+ resp->header = readq(&portal->header);
+ status = MC_CMD_HDR_READ_STATUS(resp->header);
+ if (status != MC_CMD_STATUS_OK)
+ return status;
+
+ /* Copy command response data from MC portal: */
+ for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++)
+ resp->params[i] = readq(&portal->params[i]);
+
+ return status;
+}
+
+int mc_send_command(struct fsl_mc_io *mc_io, struct mc_command *cmd);
+
+#endif /* __FSL_MC_CMD_H */
diff --git a/include/fsl-mc/fsl_mc_sys.h b/include/fsl-mc/fsl_mc_sys.h
new file mode 100644
index 0000000..c0befe0
--- /dev/null
+++ b/include/fsl-mc/fsl_mc_sys.h
@@ -0,0 +1,26 @@
+/*
+ * Freescale Layerscape Management Complex (MC) Environment-specific code
+ *
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _FSL_MC_SYS_H
+#define _FSL_MC_SYS_H
+
+#include <asm/io.h>
+
+struct mc_command;
+
+/*
+ * struct mc_portal_wrapper - MC command portal wrapper object
+ */
+struct fsl_mc_io {
+ struct mc_command __iomem *mmio_regs;
+};
+
+int mc_send_command(struct fsl_mc_io *mc_io,
+ struct mc_command *cmd);
+
+#endif /* _FSL_MC_SYS_H */
diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h
index 3286c95..feccef9 100644
--- a/include/fsl_ddr.h
+++ b/include/fsl_ddr.h
@@ -44,11 +44,12 @@ u32 fsl_ddr_get_version(void);
* to this specific DDR technology.
*/
static __inline__ int
-compute_dimm_parameters(const generic_spd_eeprom_t *spd,
+compute_dimm_parameters(const unsigned int ctrl_num,
+ const generic_spd_eeprom_t *spd,
dimm_params_t *pdimm,
unsigned int dimm_number)
{
- return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
+ return ddr_compute_dimm_parameters(ctrl_num, spd, pdimm, dimm_number);
}
#endif
@@ -92,13 +93,15 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
unsigned int size_only);
const char *step_to_string(unsigned int step);
-unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+unsigned int compute_fsl_memctl_config_regs(const unsigned int ctrl_num,
+ const memctl_options_t *popts,
fsl_ddr_cfg_regs_t *ddr,
const common_timing_params_t *common_dimm,
const dimm_params_t *dimm_parameters,
unsigned int dbw_capacity_adjust,
unsigned int size_only);
unsigned int compute_lowest_common_dimm_parameters(
+ const unsigned int ctrl_num,
const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
unsigned int number_of_dimms);
@@ -108,13 +111,15 @@ unsigned int populate_memctl_options(int all_dimms_registered,
unsigned int ctrl_num);
void check_interleaving_options(fsl_ddr_info_t *pinfo);
-unsigned int mclk_to_picos(unsigned int mclk);
-unsigned int get_memory_clk_period_ps(void);
-unsigned int picos_to_mclk(unsigned int picos);
+unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk);
+unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num);
+unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos);
void fsl_ddr_set_lawbar(
const common_timing_params_t *memctl_common_params,
unsigned int memctl_interleaved,
unsigned int ctrl_num);
+void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
+ unsigned int last_ctrl);
int fsl_ddr_interactive_env_var_exists(void);
unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set);
diff --git a/include/fsl_ddr_dimm_params.h b/include/fsl_ddr_dimm_params.h
index 09a67a6..751e935 100644
--- a/include/fsl_ddr_dimm_params.h
+++ b/include/fsl_ddr_dimm_params.h
@@ -112,7 +112,7 @@ typedef struct dimm_params_s {
#endif
} dimm_params_t;
-extern unsigned int ddr_compute_dimm_parameters(
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
const generic_spd_eeprom_t *spd,
dimm_params_t *pdimm,
unsigned int dimm_number);
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index e3d6581..57295b4 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -108,6 +108,7 @@
#define XFERTYP_RSPTYP_48_BUSY 0x00030000
#define XFERTYP_MSBSEL 0x00000020
#define XFERTYP_DTDSEL 0x00000010
+#define XFERTYP_DDREN 0x00000008
#define XFERTYP_AC12EN 0x00000004
#define XFERTYP_BCEN 0x00000002
#define XFERTYP_DMAEN 0x00000001
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index aa850a3..b6e6f04 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -175,6 +175,32 @@ struct jr_regs {
u32 jrcr;
};
+/*
+ * Scatter Gather Entry - Specifies the the Scatter Gather Format
+ * related information
+ */
+struct sg_entry {
+#ifdef CONFIG_SYS_FSL_SEC_LE
+ uint32_t addr_lo; /* Memory Address - lo */
+ uint16_t addr_hi; /* Memory Address of start of buffer - hi */
+ uint16_t reserved_zero;
+#else
+ uint16_t reserved_zero;
+ uint16_t addr_hi; /* Memory Address of start of buffer - hi */
+ uint32_t addr_lo; /* Memory Address - lo */
+#endif
+
+ uint32_t len_flag; /* Length of the data in the frame */
+#define SG_ENTRY_LENGTH_MASK 0x3FFFFFFF
+#define SG_ENTRY_EXTENSION_BIT 0x80000000
+#define SG_ENTRY_FINAL_BIT 0x40000000
+ uint32_t bpid_offset;
+#define SG_ENTRY_BPID_MASK 0x00FF0000
+#define SG_ENTRY_BPID_SHIFT 16
+#define SG_ENTRY_OFFSET_MASK 0x00001FFF
+#define SG_ENTRY_OFFSET_SHIFT 0
+};
+
int sec_init(void);
#endif
diff --git a/include/hw_sha.h b/include/hw_sha.h
index 783350d..ab19a99 100644
--- a/include/hw_sha.h
+++ b/include/hw_sha.h
@@ -7,7 +7,7 @@
*/
#ifndef __HW_SHA_H
#define __HW_SHA_H
-
+#include <hash.h>
/**
* Computes hash value of input pbuf using h/w acceleration
@@ -34,4 +34,43 @@ void hw_sha256(const uchar * in_addr, uint buflen,
*/
void hw_sha1(const uchar * in_addr, uint buflen,
uchar * out_addr, uint chunk_size);
+
+/*
+ * Create the context for sha progressive hashing using h/w acceleration
+ *
+ * @algo: Pointer to the hash_algo struct
+ * @ctxp: Pointer to the pointer of the context for hashing
+ * @return 0 if ok, -ve on error
+ */
+int hw_sha_init(struct hash_algo *algo, void **ctxp);
+
+/*
+ * Update buffer for sha progressive hashing using h/w acceleration
+ *
+ * The context is freed by this function if an error occurs.
+ *
+ * @algo: Pointer to the hash_algo struct
+ * @ctx: Pointer to the context for hashing
+ * @buf: Pointer to the buffer being hashed
+ * @size: Size of the buffer being hashed
+ * @is_last: 1 if this is the last update; 0 otherwise
+ * @return 0 if ok, -ve on error
+ */
+int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf,
+ unsigned int size, int is_last);
+
+/*
+ * Copy sha hash result at destination location
+ *
+ * The context is freed after completion of hash operation or after an error.
+ *
+ * @algo: Pointer to the hash_algo struct
+ * @ctx: Pointer to the context for hashing
+ * @dest_buf: Pointer to the destination buffer where hash is to be copied
+ * @size: Size of the buffer being hashed
+ * @return 0 if ok, -ve on error
+ */
+int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf,
+ int size);
+
#endif
diff --git a/include/i2c.h b/include/i2c.h
index 27fe00f..31b0389 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -25,14 +25,13 @@
* enough as to be incompatible for compilation purposes.
*/
-#ifdef CONFIG_DM_I2C
-
enum dm_i2c_chip_flags {
DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */
DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */
DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */
};
+struct udevice;
/**
* struct dm_i2c_chip - information about an i2c chip
*
@@ -125,21 +124,21 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
struct udevice **devp);
/**
- * i2c_set_bus_speed() - set the speed of a bus
+ * dm_i2c_set_bus_speed() - set the speed of a bus
*
* @bus: Bus to adjust
* @speed: Requested speed in Hz
* @return 0 if OK, -EINVAL for invalid values
*/
-int i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
+int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
/**
- * i2c_get_bus_speed() - get the speed of a bus
+ * dm_i2c_get_bus_speed() - get the speed of a bus
*
* @bus: Bus to check
* @return speed of selected I2C bus in Hz, -ve on error
*/
-int i2c_get_bus_speed(struct udevice *bus);
+int dm_i2c_get_bus_speed(struct udevice *bus);
/**
* i2c_set_chip_flags() - set flags for a chip
@@ -439,8 +438,6 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len,
int i2c_chip_ofdata_to_platdata(const void *blob, int node,
struct dm_i2c_chip *chip);
-#endif
-
#ifndef CONFIG_DM_I2C
/*
diff --git a/include/mmc.h b/include/mmc.h
index e4b071e..2ad0f19 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -14,24 +14,41 @@
#include <linux/compiler.h>
#include <part.h>
-#define SD_VERSION_SD 0x20000
-#define SD_VERSION_3 (SD_VERSION_SD | 0x300)
-#define SD_VERSION_2 (SD_VERSION_SD | 0x200)
-#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100)
-#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
-#define MMC_VERSION_MMC 0x10000
-#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC)
-#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102)
-#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104)
-#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202)
-#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300)
-#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400)
-#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401)
-#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402)
-#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
-#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
-#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
-#define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500)
+/* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
+#define SD_VERSION_SD (1U << 31)
+#define MMC_VERSION_MMC (1U << 30)
+
+#define MAKE_SDMMC_VERSION(a, b, c) \
+ ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c))
+#define MAKE_SD_VERSION(a, b, c) \
+ (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c))
+#define MAKE_MMC_VERSION(a, b, c) \
+ (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c))
+
+#define EXTRACT_SDMMC_MAJOR_VERSION(x) \
+ (((u32)(x) >> 16) & 0xff)
+#define EXTRACT_SDMMC_MINOR_VERSION(x) \
+ (((u32)(x) >> 8) & 0xff)
+#define EXTRACT_SDMMC_CHANGE_VERSION(x) \
+ ((u32)(x) & 0xff)
+
+#define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0)
+#define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0)
+#define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0)
+#define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0)
+
+#define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0)
+#define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0)
+#define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0)
+#define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0)
+#define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0)
+#define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0)
+#define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0)
+#define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0)
+#define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0)
+#define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1)
+#define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0)
+#define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0)
#define MMC_MODE_HS (1 << 0)
#define MMC_MODE_HS_52MHz (1 << 1)
@@ -43,7 +60,8 @@
#define SD_DATA_4BIT 0x00040000
-#define IS_SD(x) (x->version & SD_VERSION_SD)
+#define IS_SD(x) ((x)->version & SD_VERSION_SD)
+#define IS_MMC(x) ((x)->version & SD_VERSION_MMC)
#define MMC_DATA_READ 1
#define MMC_DATA_WRITE 2
diff --git a/include/net.h b/include/net.h
index 73ea88b..43e3d28 100644
--- a/include/net.h
+++ b/include/net.h
@@ -512,10 +512,6 @@ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum);
*/
int ip_checksum_ok(const void *addr, unsigned nbytes);
-/* Checksum */
-extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */
-extern uint NetCksum(uchar *, int); /* Calculate the checksum */
-
/* Callbacks */
extern rxhand_f *net_get_udp_handler(void); /* Get UDP RX packet handler */
extern void net_set_udp_handler(rxhand_f *); /* Set UDP RX packet handler */
diff --git a/include/netdev.h b/include/netdev.h
index daffc12..90140bd 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -55,7 +55,6 @@ int ftmac100_initialize(bd_t *bits);
int ftmac110_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
-int ks8695_eth_initialize(void);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
diff --git a/include/serial.h b/include/serial.h
index 66ed12c..de40e94 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -29,7 +29,7 @@ extern struct serial_device *default_serial_console(void);
#if defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_440) || \
- defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
+ defined(CONFIG_MPC5xxx) || \
defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \
defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \
@@ -182,7 +182,6 @@ void evb64260_serial_initialize(void);
void imx_serial_initialize(void);
void iop480_serial_initialize(void);
void jz_serial_initialize(void);
-void ks8695_serial_initialize(void);
void leon2_serial_initialize(void);
void leon3_serial_initialize(void);
void lh7a40x_serial_initialize(void);
diff --git a/lib/Kconfig b/lib/Kconfig
index a1f30a2..c9d2767 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -29,4 +29,40 @@ config SYS_HZ
source lib/rsa/Kconfig
+menu "Hashing Support"
+
+config SHA1
+ bool "Enable SHA1 support"
+ help
+ This option enables support of hashing using SHA1 algorithm.
+ The hash is calculated in software.
+ The SHA1 algorithm produces a 160-bit (20-byte) hash value
+ (digest).
+
+config SHA256
+ bool "Enable SHA256 support"
+ help
+ This option enables support of hashing using SHA256 algorithm.
+ The hash is calculated in software.
+ The SHA256 algorithm produces a 256-bit (32-byte) hash value
+ (digest).
+
+config SHA_HW_ACCEL
+ bool "Enable hashing using hardware"
+ help
+ This option enables hardware acceleration
+ for SHA1/SHA256 hashing.
+ This affects the 'hash' command and also the
+ hash_lookup_algo() function.
+
+config SHA_PROG_HW_ACCEL
+ bool "Enable Progressive hashing support using hardware"
+ depends on SHA_HW_ACCEL
+ help
+ This option enables hardware-acceleration for
+ SHA1/SHA256 progressive hashing.
+ Data can be streamed in a block at a time and the hashing
+ is performed in hardware.
+endmenu
+
endmenu
diff --git a/net/net.c b/net/net.c
index 2bea07b..b60ce62 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1086,7 +1086,7 @@ NetReceive(uchar *inpkt, int len)
if ((ip->ip_hl_v & 0x0f) > 0x05)
return;
/* Check the Checksum of the header */
- if (!NetCksumOk((uchar *)ip, IP_HDR_SIZE / 2)) {
+ if (!ip_checksum_ok((uchar *)ip, IP_HDR_SIZE)) {
debug("checksum bad\n");
return;
}
@@ -1291,27 +1291,6 @@ common:
/**********************************************************************/
int
-NetCksumOk(uchar *ptr, int len)
-{
- return !((NetCksum(ptr, len) + 1) & 0xfffe);
-}
-
-
-unsigned
-NetCksum(uchar *ptr, int len)
-{
- ulong xsum;
- ushort *p = (ushort *)ptr;
-
- xsum = 0;
- while (len-- > 0)
- xsum += *p++;
- xsum = (xsum & 0xffff) + (xsum >> 16);
- xsum = (xsum & 0xffff) + (xsum >> 16);
- return xsum & 0xffff;
-}
-
-int
NetEthHdrSize(void)
{
ushort myvlanid;
@@ -1410,7 +1389,7 @@ void net_set_udp_header(uchar *pkt, IPaddr_t dest, int dport, int sport,
net_set_ip_header(pkt, dest, NetOurIP);
ip->ip_len = htons(IP_UDP_HDR_SIZE + len);
ip->ip_p = IPPROTO_UDP;
- ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE >> 1);
+ ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE);
ip->udp_src = htons(sport);
ip->udp_dst = htons(dport);
diff --git a/net/ping.c b/net/ping.c
index 2be56ed..366f518 100644
--- a/net/ping.c
+++ b/net/ping.c
@@ -29,14 +29,14 @@ static void set_icmp_header(uchar *pkt, IPaddr_t dest)
ip->ip_len = htons(IP_ICMP_HDR_SIZE);
ip->ip_p = IPPROTO_ICMP;
- ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE >> 1);
+ ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE);
icmp->type = ICMP_ECHO_REQUEST;
icmp->code = 0;
icmp->checksum = 0;
icmp->un.echo.id = 0;
icmp->un.echo.sequence = htons(PingSeqNo++);
- icmp->checksum = ~NetCksum((uchar *)icmp, ICMP_HDR_SIZE >> 1);
+ icmp->checksum = compute_ip_checksum(icmp, ICMP_HDR_SIZE);
}
static int ping_send(void)
@@ -101,13 +101,11 @@ void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len)
ip->ip_off = 0;
NetCopyIP((void *)&ip->ip_dst, &ip->ip_src);
NetCopyIP((void *)&ip->ip_src, &NetOurIP);
- ip->ip_sum = ~NetCksum((uchar *)ip,
- IP_HDR_SIZE >> 1);
+ ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE);
icmph->type = ICMP_ECHO_REPLY;
icmph->checksum = 0;
- icmph->checksum = ~NetCksum((uchar *)icmph,
- (len - IP_HDR_SIZE) >> 1);
+ icmph->checksum = compute_ip_checksum(icmph, len - IP_HDR_SIZE);
NetSendPacket((uchar *)et, eth_hdr_size + len);
return;
/* default:
diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf
index 8e9d71f..f054081 100644
--- a/scripts/Makefile.autoconf
+++ b/scripts/Makefile.autoconf
@@ -7,9 +7,17 @@
# (= When we move all CONFIGs from header files to Kconfig)
# this makefile can be deleted.
-# obj is "include" or "spl/include" or "tpl/include"
-# for non-SPL, SPL, TPL, respectively
-include $(obj)/config/auto.conf
+__all: include/autoconf.mk include/autoconf.mk.dep
+
+ifeq ($(shell grep -q '^CONFIG_SPL=y' include/config/auto.conf 2>/dev/null && echo y),y)
+__all: spl/include/autoconf.mk
+endif
+
+ifeq ($(shell grep -q '^CONFIG_TPL=y' include/config/auto.conf 2>/dev/null && echo y),y)
+__all: tpl/include/autoconf.mk
+endif
+
+include include/config/auto.conf
include scripts/Kbuild.include
@@ -22,7 +30,6 @@ CPP = $(CC) -E
include config.mk
UBOOTINCLUDE := \
- -I$(obj) \
-Iinclude \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
-I$(srctree)/arch/$(ARCH)/include \
@@ -48,10 +55,10 @@ include/autoconf.mk.dep: FORCE
# same CONFIG macros
quiet_cmd_autoconf = GEN $@
cmd_autoconf = \
- $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && { \
+ $(CPP) $(c_flags) $2 -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && { \
sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp | \
while read line; do \
- if ! grep -q "$${line%=*}=" $(obj)/config/auto.conf; then \
+ if ! grep -q "$${line%=*}=" include/config/auto.conf; then \
echo "$$line"; \
fi \
done > $@; \
@@ -60,10 +67,19 @@ quiet_cmd_autoconf = GEN $@
rm $@.tmp; false; \
}
-$(obj)/autoconf.mk: FORCE
+include/autoconf.mk: FORCE
$(call cmd,autoconf)
-include/autoconf.mk include/autoconf.mk.dep: include/config.h
+spl/include/autoconf.mk: FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call cmd,autoconf,-DCONFIG_SPL_BUILD)
+
+tpl/include/autoconf.mk: FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call cmd,autoconf,-DCONFIG_SPL_BUILD -DCONFIG_TPL_BUILD)
+
+include/autoconf.mk include/autoconf.mk.dep \
+ spl/include/autoconf.mk tpl/include/autoconf.mk: include/config.h
# include/config.h
# Prior to Kconfig, it was generated by mkconfig. Now it is created here.
@@ -75,25 +91,36 @@ define filechk_config_h
done; \
echo \#define CONFIG_BOARDDIR board/$(if $(VENDOR),$(VENDOR)/)$(BOARD);\
echo \#include \<config_defaults.h\>; \
+ echo \#include \<config_uncmd_spl.h\>; \
echo \#include \<configs/$(CONFIG_SYS_CONFIG_NAME).h\>; \
echo \#include \<asm/config.h\>; \
- echo \#include \<config_fallbacks.h\>; \
- echo \#include \<config_uncmd_spl.h\>; )
+ echo \#include \<config_fallbacks.h\>;)
endef
include/config.h: scripts/Makefile.autoconf create_symlink FORCE
$(call filechk,config_h)
# symbolic links
+# If arch/$(ARCH)/mach-$(SOC)/include/mach exists,
+# make a symbolic link to that directory.
+# Otherwise, create a symbolic link to arch/$(ARCH)/include/asm/arch-$(SOC).
PHONY += create_symlink
create_symlink:
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm
- $(Q)ln -fsn $(KBUILD_SRC)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
- include/asm/arch
+ $(Q)if [ -d $(KBUILD_SRC)/arch/$(ARCH)/mach-$(SOC)/include/mach ]; then \
+ dest=arch/$(ARCH)/mach-$(SOC)/include/mach; \
+ else \
+ dest=arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)); \
+ fi; \
+ ln -fsn $(KBUILD_SRC)/$$dest include/asm/arch
else
- $(Q)ln -fsn arch-$(if $(SOC),$(SOC),$(CPU)) \
- arch/$(ARCH)/include/asm/arch
+ $(Q)if [ -d arch/$(ARCH)/mach-$(SOC)/include/mach ]; then \
+ dest=../../mach-$(SOC)/include/mach; \
+ else \
+ dest=arch-$(if $(SOC),$(SOC),$(CPU)); \
+ fi; \
+ ln -fsn $$dest arch/$(ARCH)/include/asm/arch
endif
PHONY += FORCE
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 14cf092..ac0554e 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -41,8 +41,9 @@ subdir-ccflags-y :=
# Read auto.conf if it exists, otherwise ignore
# Modified for U-Boot
--include $(prefix)/include/config/auto.conf
+-include include/config/auto.conf
-include $(prefix)/include/autoconf.mk
+include scripts/Makefile.uncmd_spl
include scripts/Kbuild.include
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index e4b9881..fcacb7f 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -21,13 +21,15 @@ _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
include $(srctree)/scripts/Kbuild.include
-UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
-
--include $(obj)/include/config/auto.conf
+-include include/config/auto.conf
-include $(obj)/include/autoconf.mk
+KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
+ifeq ($(CONFIG_TPL_BUILD),y)
+KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
+endif
+
ifeq ($(CONFIG_TPL_BUILD),y)
-export CONFIG_TPL_BUILD
SPL_BIN := u-boot-tpl
else
SPL_BIN := u-boot-spl
@@ -154,10 +156,8 @@ ALL-y += $(obj)/$(BOARD)-spl.bin
endif
ifdef CONFIG_SUNXI
-ifndef CONFIG_SPL_FEL
ALL-y += $(obj)/sunxi-spl.bin
endif
-endif
ifeq ($(CONFIG_SYS_SOC),"at91")
ALL-y += boot.bin
diff --git a/scripts/Makefile.uncmd_spl b/scripts/Makefile.uncmd_spl
new file mode 100644
index 0000000..343c3fc
--- /dev/null
+++ b/scripts/Makefile.uncmd_spl
@@ -0,0 +1,18 @@
+# Makefile version of include/config_uncmd_spl.h
+#
+# TODO: Invent a better way
+
+ifdef CONFIG_SPL_BUILD
+CONFIG_OF_CONTROL=
+
+ifndef CONFIG_SPL_DM
+CONFIG_DM_SERIAL=
+CONFIG_DM_GPIO=
+CONIFG_DM_I2C=
+CONFIG_DM_SPI=
+CONFIG_DM_SPI_FLASH=
+endif
+
+CONFIG_DM_DEVICE_REMOVE=
+
+endif
diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh
index 366e8fa..cc8a787 100755
--- a/scripts/multiconfig.sh
+++ b/scripts/multiconfig.sh
@@ -2,11 +2,7 @@
#
# A wrapper script to adjust Kconfig for U-Boot
#
-# Instead of touching various parts under the scripts/kconfig/ directory,
-# pushing necessary adjustments into this single script would be better
-# for code maintainance. All the make targets related to the configuration
-# (make %config) should be invoked via this script.
-# See doc/README.kconfig for further information of Kconfig.
+# This file will be removed after cleaning up defconfig files
#
# Copyright (C) 2014, Masahiro Yamada <yamada.m@jp.panasonic.com>
#
@@ -15,77 +11,23 @@
set -e
-# Set "DEBUG" enavironment variable to show debug messages
-debug () {
- if [ $DEBUG ]; then
- echo "$@"
- fi
-}
-
-# Useful shorthands
-build () {
- debug $progname: $MAKE -f $srctree/scripts/Makefile.build obj="$@"
- $MAKE -f $srctree/scripts/Makefile.build obj="$@"
-}
-
-autoconf () {
- debug $progname: $MAKE -f $srctree/scripts/Makefile.autoconf obj="$@"
- $MAKE -f $srctree/scripts/Makefile.autoconf obj="$@"
-}
-
# Make a configuration target
# Usage:
# run_make_config <target> <objdir>
# <target>: Make target such as "config", "menuconfig", "defconfig", etc.
-# <objdir>: Target directory where the make command is run.
-# Typically "", "spl", "tpl" for Normal, SPL, TPL, respectively.
run_make_config () {
- target=$1
- objdir=$2
-
# Linux expects defconfig files in arch/$(SRCARCH)/configs/ directory,
# but U-Boot has them in configs/ directory.
# Give SRCARCH=.. to fake scripts/kconfig/Makefile.
- options="SRCARCH=.. KCONFIG_OBJDIR=$objdir"
- if [ "$objdir" ]; then
- options="$options KCONFIG_CONFIG=$objdir/$KCONFIG_CONFIG"
- mkdir -p $objdir
- fi
-
- build scripts/kconfig $options $target
-}
-
-# Parse .config file to detect if CONFIG_SPL, CONFIG_TPL is enabled
-# and returns:
-# "" if neither CONFIG_SPL nor CONFIG_TPL is defined
-# "spl" if CONFIG_SPL is defined but CONFIG_TPL is not
-# "spl tpl" if both CONFIG_SPL and CONFIG_TPL are defined
-get_enabled_subimages() {
- if [ ! -r "$KCONFIG_CONFIG" ]; then
- # This should never happen
- echo "$progname: $KCONFIG_CONFIG not found" >&2
- exit 1
- fi
-
- # CONFIG_SPL=y -> spl
- # CONFIG_TPL=y -> tpl
- sed -n -e 's/^CONFIG_SPL=y$/spl/p' -e 's/^CONFIG_TPL=y$/tpl/p' \
- $KCONFIG_CONFIG
+ $MAKE -f $srctree/scripts/Makefile.build obj=scripts/kconfig SRCARCH=.. $1
}
do_silentoldconfig () {
run_make_config silentoldconfig
- subimages=$(get_enabled_subimages)
-
- for obj in $subimages
- do
- mkdir -p $obj/include/config $obj/include/generated
- run_make_config silentoldconfig $obj
- done
# If the following part fails, include/config/auto.conf should be
# deleted so "make silentoldconfig" will be re-run on the next build.
- autoconf include include/autoconf.mk include/autoconf.mk.dep || {
+ $MAKE -f $srctree/scripts/Makefile.autoconf || {
rm -f include/config/auto.conf
exit 1
}
@@ -95,14 +37,6 @@ do_silentoldconfig () {
# than include/config.h.
# Otherwise, 'make silentoldconfig' would be invoked twice.
touch include/config/auto.conf
-
- for obj in $subimages
- do
- autoconf $obj/include $obj/include/autoconf.mk || {
- rm -f include/config/auto.conf
- exit 1
- }
- done
}
cleanup_after_defconfig () {
@@ -116,7 +50,6 @@ cleanup_after_defconfig () {
# do_board_defconfig <board>_defconfig
do_board_defconfig () {
defconfig_path=$srctree/configs/$1
- tmp_defconfig_path=configs/.tmp_defconfig
if [ ! -r $defconfig_path ]; then
echo >&2 "***"
@@ -126,42 +59,17 @@ do_board_defconfig () {
fi
mkdir -p arch configs
- # defconfig for Normal:
- # pick lines without prefixes and lines starting '+' prefix
- # and rip the prefixes off.
- sed -n -e '/^[+A-Z]*:/!p' -e 's/^+[A-Z]*://p' $defconfig_path \
- > configs/.tmp_defconfig
+ # prefix "*:" is deprecated. Drop it simply.
+ sed -e 's/^[+A-Z]*://' $defconfig_path > configs/.tmp_defconfig
run_make_config .tmp_defconfig || {
cleanup_after_defconfig
exit 1
}
- for img in $(get_enabled_subimages)
- do
- symbol=$(echo $img | cut -c 1 | tr '[a-z]' '[A-Z]')
- # defconfig for SPL, TPL:
- # pick lines with 'S', 'T' prefix and rip the prefixes off
- sed -n -e 's/^[+A-Z]*'$symbol'[A-Z]*://p' $defconfig_path \
- > configs/.tmp_defconfig
- run_make_config .tmp_defconfig $img || {
- cleanup_after_defconfig
- exit 1
- }
- done
-
cleanup_after_defconfig
}
-do_defconfig () {
- if [ "$KBUILD_DEFCONFIG" ]; then
- do_board_defconfig $KBUILD_DEFCONFIG
- echo "*** Default configuration is based on '$KBUILD_DEFCONFIG'"
- else
- run_make_config defconfig
- fi
-}
-
do_board_felconfig () {
do_board_defconfig ${1%%_felconfig}_defconfig
if ! grep -q CONFIG_ARCH_SUNXI=y .config || ! grep -q CONFIG_SPL=y .config ; then
@@ -169,162 +77,11 @@ do_board_felconfig () {
exit 1
fi
sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y\nCONFIG_UART0_PORT_F=n/g' \
- .config spl/.config
+ .config
}
-do_savedefconfig () {
- if [ -r "$KCONFIG_CONFIG" ]; then
- subimages=$(get_enabled_subimages)
- else
- subimages=
- fi
-
- run_make_config savedefconfig
-
- output_lines=
-
- # -r option is necessay because some string-type configs may include
- # backslashes as an escape character
- while read -r line
- do
- output_lines="$output_lines%$line"
- done < defconfig
-
- for img in $subimages
- do
- run_make_config savedefconfig $img
-
- symbol=$(echo $img | cut -c 1 | tr '[a-z]' '[A-Z]')
- unmatched=
-
- while read -r line
- do
- tmp=
- match=
-
- # "# CONFIG_FOO is not set" should not be divided.
- # Use "%" as a separator, instead of a whitespace.
- # "%" is unlikely to appear in defconfig context.
- save_IFS=$IFS
- IFS=%
- # coalesce common lines together
- for i in $output_lines
- do
- case "$i" in
- [+A-Z]*:$line)
- tmp="$tmp%$unmatched"
- i=$(echo "$i" | \
- sed -e "s/^\([^:]*\)/\1$symbol/")
- tmp="$tmp%$i"
- match=1
- ;;
- $line)
- tmp="$tmp%$unmatched"
- tmp="$tmp%+$symbol:$i"
- match=1
- ;;
- *)
- tmp="$tmp%$i"
- ;;
- esac
- done
-
- # Restore the default separator for the outer for loop.
- IFS=$save_IFS
-
- if [ "$match" ]; then
- output_lines="$tmp"
- unmatched=
- else
- unmatched="$unmatched%$symbol:$line"
- fi
- done < defconfig
-
- output_lines="$output_lines%$unmatched"
- done
-
- rm -f defconfig
- touch defconfig
-
- save_IFS=$IFS
- IFS=%
-
- for line in $output_lines
- do
- case "$line" in
- "")
- # do not output blank lines
- ;;
- *)
- echo $line >> defconfig
- ;;
- esac
- done
-
- IFS=$save_IFS
-}
-
-# Some sanity checks before running "make <objdir>/<target>",
-# where <objdir> should be either "spl" or "tpl".
-# Doing "make spl/menuconfig" etc. on a non-SPL board makes no sense.
-# It should be allowed only when ".config" exists and "CONFIG_SPL" is enabled.
-#
-# Usage:
-# check_enabled_sumbimage <objdir>/<target> <objdir>
-check_enabled_subimage () {
-
- case $2 in
- spl|tpl) ;;
- *)
- echo >&2 "***"
- echo >&2 "*** \"make $1\" is not supported."
- echo >&2 "***"
- exit 1
- ;;
- esac
- test -r "$KCONFIG_CONFIG" && get_enabled_subimages | grep -q $2 || {
- config=CONFIG_$(echo $2 | tr '[a-z]' '[A-Z]')
-
- echo >&2 "***"
- echo >&2 "*** Create \"$KCONFIG_CONFIG\" with \"$config\" enabled"
- echo >&2 "*** before \"make $1\"."
- echo >&2 "***"
- exit 1
- }
-}
-
-# Usage:
-# do_others <objdir>/<target>
-# The field "<objdir>/" is typically empy, "spl/", "tpl/" for Normal, SPL, TPL,
-# respectively.
-# The field "<target>" is a configuration target such as "config",
-# "menuconfig", etc.
do_others () {
- target=${1##*/}
-
- if [ "$target" = "$1" ]; then
- objdir=
- else
- objdir=${1%/*}
- check_enabled_subimage $1 $objdir
-
- if [ -f "$objdir/$KCONFIG_CONFIG" ]; then
- timestamp_before=$(stat --printf="%Y" \
- $objdir/$KCONFIG_CONFIG)
- fi
- fi
-
- run_make_config $target $objdir
-
- if [ "$timestamp_before" -a -f "$objdir/$KCONFIG_CONFIG" ]; then
- timestamp_after=$(stat --printf="%Y" $objdir/$KCONFIG_CONFIG)
-
- if [ "$timestamp_after" -gt "$timestamp_before" ]; then
- # $objdir/.config has been updated.
- # touch .config to invoke "make silentoldconfig"
- touch $KCONFIG_CONFIG
- fi
- fi
+ run_make_config $1
}
progname=$(basename $0)
@@ -340,10 +97,6 @@ case $target in
do_board_defconfig ${target%_config}_defconfig;;
silentoldconfig)
do_silentoldconfig;;
-defconfig)
- do_defconfig;;
-savedefconfig)
- do_savedefconfig;;
*)
do_others $target;;
esac
diff --git a/test/Kconfig b/test/Kconfig
new file mode 100644
index 0000000..1fb1716
--- /dev/null
+++ b/test/Kconfig
@@ -0,0 +1 @@
+source "test/dm/Kconfig"
diff --git a/test/dm/Kconfig b/test/dm/Kconfig
new file mode 100644
index 0000000..a9d0298
--- /dev/null
+++ b/test/dm/Kconfig
@@ -0,0 +1,8 @@
+config DM_TEST
+ bool "Enable driver model test command"
+ depends on SANDBOX && CMD_DM
+ help
+ This enables the 'dm test' command which runs a series of unit
+ tests on the driver model code. Each subsystem (uclass) is tested.
+ If all is well then all tests pass although there will be a few
+ messages printed along the way.
diff --git a/test/dm/i2c.c b/test/dm/i2c.c
index ef88372..541b73b 100644
--- a/test/dm/i2c.c
+++ b/test/dm/i2c.c
@@ -67,10 +67,10 @@ static int dm_test_i2c_speed(struct dm_test_state *dms)
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
ut_assertok(i2c_get_chip(bus, chip, 1, &dev));
- ut_assertok(i2c_set_bus_speed(bus, 100000));
+ ut_assertok(dm_i2c_set_bus_speed(bus, 100000));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
- ut_assertok(i2c_set_bus_speed(bus, 400000));
- ut_asserteq(400000, i2c_get_bus_speed(bus));
+ ut_assertok(dm_i2c_set_bus_speed(bus, 400000));
+ ut_asserteq(400000, dm_i2c_get_bus_speed(bus));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_asserteq(-EINVAL, dm_i2c_write(dev, 0, buf, 5));
diff --git a/tools/Makefile b/tools/Makefile
index e4b23eb..88770b0 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -128,8 +128,6 @@ HOSTLOADLIBES_dumpimage := $(HOSTLOADLIBES_mkimage)
HOSTLOADLIBES_fit_info := $(HOSTLOADLIBES_mkimage)
HOSTLOADLIBES_fit_check_sign := $(HOSTLOADLIBES_mkimage)
-HOSTLDFLAGS += -T $(srctree)/tools/imagetool.lds
-
hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl
hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
HOSTCFLAGS_mkexynosspl.o := -pedantic
diff --git a/tools/buildman/toolchain.py b/tools/buildman/toolchain.py
index d4c5d4a..537797a 100644
--- a/tools/buildman/toolchain.py
+++ b/tools/buildman/toolchain.py
@@ -197,13 +197,14 @@ class Toolchains:
Returns:
Filename of C compiler if found, else None
"""
+ fnames = []
for subdir in ['.', 'bin', 'usr/bin']:
dirname = os.path.join(path, subdir)
if verbose: print " - looking in '%s'" % dirname
for fname in glob.glob(dirname + '/*gcc'):
if verbose: print " - found '%s'" % fname
- return fname
- return None
+ fnames.append(fname)
+ return fnames
def Scan(self, verbose):
@@ -219,8 +220,8 @@ class Toolchains:
if verbose: print 'Scanning for tool chains'
for path in self.paths:
if verbose: print " - scanning path '%s'" % path
- fname = self.ScanPath(path, verbose)
- if fname:
+ fnames = self.ScanPath(path, verbose)
+ for fname in fnames:
self.Add(fname, True, verbose)
def List(self):
diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config
index c9b9f6a..6f216f9 100644
--- a/tools/env/fw_env.config
+++ b/tools/env/fw_env.config
@@ -20,3 +20,6 @@
# Block device example
#/dev/mmcblk0 0xc0000 0x20000
+
+# VFAT example
+#/boot/uboot.env 0x0000 0x4000
diff --git a/tools/imagetool.c b/tools/imagetool.c
index 148e466..4b0b73d 100644
--- a/tools/imagetool.c
+++ b/tools/imagetool.c
@@ -12,16 +12,16 @@
struct image_type_params *imagetool_get_type(int type)
{
- struct image_type_params *curr;
- struct image_type_params *start = ll_entry_start(
- struct image_type_params, image_type);
- struct image_type_params *end = ll_entry_end(
- struct image_type_params, image_type);
+ struct image_type_params **curr;
+ INIT_SECTION(image_type);
+
+ struct image_type_params **start = __start_image_type;
+ struct image_type_params **end = __stop_image_type;
for (curr = start; curr != end; curr++) {
- if (curr->check_image_type) {
- if (!curr->check_image_type(type))
- return curr;
+ if ((*curr)->check_image_type) {
+ if (!(*curr)->check_image_type(type))
+ return *curr;
}
}
return NULL;
@@ -34,16 +34,15 @@ int imagetool_verify_print_header(
struct image_tool_params *params)
{
int retval = -1;
- struct image_type_params *curr;
+ struct image_type_params **curr;
+ INIT_SECTION(image_type);
- struct image_type_params *start = ll_entry_start(
- struct image_type_params, image_type);
- struct image_type_params *end = ll_entry_end(
- struct image_type_params, image_type);
+ struct image_type_params **start = __start_image_type;
+ struct image_type_params **end = __stop_image_type;
for (curr = start; curr != end; curr++) {
- if (curr->verify_header) {
- retval = curr->verify_header((unsigned char *)ptr,
+ if ((*curr)->verify_header) {
+ retval = (*curr)->verify_header((unsigned char *)ptr,
sbuf->st_size, params);
if (retval == 0) {
@@ -51,12 +50,12 @@ int imagetool_verify_print_header(
* Print the image information if verify is
* successful
*/
- if (curr->print_header) {
- curr->print_header(ptr);
+ if ((*curr)->print_header) {
+ (*curr)->print_header(ptr);
} else {
fprintf(stderr,
"%s: print_header undefined for %s\n",
- params->cmdname, curr->name);
+ params->cmdname, (*curr)->name);
}
break;
}
diff --git a/tools/imagetool.h b/tools/imagetool.h
index f35dec7..3e15b4e 100644
--- a/tools/imagetool.h
+++ b/tools/imagetool.h
@@ -20,15 +20,6 @@
#include <unistd.h>
#include <u-boot/sha1.h>
-/* define __KERNEL__ in order to get the definitions
- * required by the linker list. This is probably not
- * the best way to do this */
-#ifndef __KERNEL__
-#define __KERNEL__
-#include <linker_lists.h>
-#undef __KERNEL__
-#endif /* __KERNEL__ */
-
#include "fdt_host.h"
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
@@ -194,6 +185,46 @@ int imagetool_save_subimage(
void pbl_load_uboot(int fd, struct image_tool_params *mparams);
+#define ___cat(a, b) a ## b
+#define __cat(a, b) ___cat(a, b)
+
+/* we need some special handling for this host tool running eventually on
+ * Darwin. The Mach-O section handling is a bit different than ELF section
+ * handling. The differnces in detail are:
+ * a) we have segments which have sections
+ * b) we need a API call to get the respective section symbols */
+#if defined(__MACH__)
+#include <mach-o/getsect.h>
+
+#define INIT_SECTION(name) do { \
+ unsigned long name ## _len; \
+ char *__cat(pstart_, name) = getsectdata("__TEXT", \
+ #name, &__cat(name, _len)); \
+ char *__cat(pstop_, name) = __cat(pstart_, name) + \
+ __cat(name, _len); \
+ __cat(__start_, name) = (void *)__cat(pstart_, name); \
+ __cat(__stop_, name) = (void *)__cat(pstop_, name); \
+ } while (0)
+#define SECTION(name) __attribute__((section("__TEXT, " #name)))
+
+struct image_type_params **__start_image_type, **__stop_image_type;
+#else
+#define INIT_SECTION(name) /* no-op for ELF */
+#define SECTION(name) __attribute__((section(#name)))
+
+/* We construct a table of pointers in an ELF section (pointers generally
+ * go unpadded by gcc). ld creates boundary syms for us. */
+extern struct image_type_params *__start_image_type[], *__stop_image_type[];
+#endif /* __MACH__ */
+
+#if !defined(__used)
+# if __GNUC__ == 3 && __GNUC_MINOR__ < 3
+# define __used __attribute__((__unused__))
+# else
+# define __used __attribute__((__used__))
+# endif
+#endif
+
#define U_BOOT_IMAGE_TYPE( \
_id, \
_name, \
@@ -208,7 +239,8 @@ void pbl_load_uboot(int fd, struct image_tool_params *mparams);
_fflag_handle, \
_vrec_header \
) \
- ll_entry_declare(struct image_type_params, _id, image_type) = { \
+ static struct image_type_params __cat(image_type_, _id) = \
+ { \
.name = _name, \
.header_size = _header_size, \
.hdr = _header, \
@@ -220,6 +252,8 @@ void pbl_load_uboot(int fd, struct image_tool_params *mparams);
.check_image_type = _check_image_type, \
.fflag_handle = _fflag_handle, \
.vrec_header = _vrec_header \
- }
+ }; \
+ static struct image_type_params *SECTION(image_type) __used \
+ __cat(image_type_ptr_, _id) = &__cat(image_type_, _id)
#endif /* _IMAGETOOL_H_ */
diff --git a/tools/imagetool.lds b/tools/imagetool.lds
deleted file mode 100644
index 7e92b4a..0000000
--- a/tools/imagetool.lds
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2011-2012 The Chromium OS Authors.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-SECTIONS
-{
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- __u_boot_sandbox_option_start = .;
- _u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) }
- __u_boot_sandbox_option_end = .;
-
- __bss_start = .;
-}
-
-INSERT BEFORE .data;
diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
index 1f0fbae..0035f6e 100644
--- a/tools/mksunxiboot.c
+++ b/tools/mksunxiboot.c
@@ -43,19 +43,19 @@ int gen_check_sum(struct boot_file_head *head_p)
uint32_t i;
uint32_t sum;
- length = head_p->length;
+ length = le32_to_cpu(head_p->length);
if ((length & 0x3) != 0) /* must 4-byte-aligned */
return -1;
buf = (uint32_t *)head_p;
- head_p->check_sum = STAMP_VALUE; /* fill stamp */
+ head_p->check_sum = cpu_to_le32(STAMP_VALUE); /* fill stamp */
loop = length >> 2;
/* calculate the sum */
for (i = 0, sum = 0; i < loop; i++)
- sum += buf[i];
+ sum += le32_to_cpu(buf[i]);
/* write back check sum */
- head_p->check_sum = sum;
+ head_p->check_sum = cpu_to_le32(sum);
return 0;
}
@@ -125,10 +125,12 @@ int main(int argc, char *argv[])
memcpy(img.header.magic, BOOT0_MAGIC, 8); /* no '0' termination */
img.header.length =
ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE);
+ img.header.b_instruction = cpu_to_le32(img.header.b_instruction);
+ img.header.length = cpu_to_le32(img.header.length);
gen_check_sum(&img.header);
- count = write(fd_out, &img, img.header.length);
- if (count != img.header.length) {
+ count = write(fd_out, &img, le32_to_cpu(img.header.length));
+ if (count != le32_to_cpu(img.header.length)) {
perror("Writing output");
return EXIT_FAILURE;
}
diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py
index c593070..4c2c35b 100644
--- a/tools/patman/gitutil.py
+++ b/tools/patman/gitutil.py
@@ -129,7 +129,7 @@ def GetUpstream(git_dir, branch):
return upstream, msg
if remote == '.':
- return merge
+ return merge, None
elif remote and merge:
leaf = merge.split('/')[-1]
return '%s/%s' % (remote, leaf), None
diff --git a/tools/patman/settings.py b/tools/patman/settings.py
index 122e8fd..ba2a68f 100644
--- a/tools/patman/settings.py
+++ b/tools/patman/settings.py
@@ -235,6 +235,31 @@ def _UpdateDefaults(parser, config):
else:
print "WARNING: Unknown setting %s" % name
+def _ReadAliasFile(fname):
+ """Read in the U-Boot git alias file if it exists.
+
+ Args:
+ fname: Filename to read.
+ """
+ if os.path.exists(fname):
+ bad_line = None
+ with open(fname) as fd:
+ linenum = 0
+ for line in fd:
+ linenum += 1
+ line = line.strip()
+ if not line or line.startswith('#'):
+ continue
+ words = line.split(' ', 2)
+ if len(words) < 3 or words[0] != 'alias':
+ if not bad_line:
+ bad_line = "%s:%d:Invalid line '%s'" % (fname, linenum,
+ line)
+ continue
+ alias[words[1]] = [s.strip() for s in words[2].split(',')]
+ if bad_line:
+ print bad_line
+
def Setup(parser, project_name, config_fname=''):
"""Set up the settings module by reading config files.
@@ -244,6 +269,8 @@ def Setup(parser, project_name, config_fname=''):
for sections named "project_section" as well.
config_fname: Config filename to read ('' for default)
"""
+ # First read the git alias file if available
+ _ReadAliasFile('doc/git-mailrc')
config = _ProjectConfigParser(project_name)
if config_fname == '':
config_fname = '%s/.patman' % os.getenv('HOME')