diff options
886 files changed, 3656 insertions, 3408 deletions
@@ -145,6 +145,7 @@ menu "Boot images" config FIT bool "Support Flattened Image Tree" select MD5 + select SHA1 help This option allows you to boot the new uImage structure, Flattened Image Tree. FIT is formally a FDT, which can include @@ -157,6 +158,20 @@ config FIT if FIT +config FIT_ENABLE_SHA256_SUPPORT + bool "Support SHA256 checksum of FIT image contents" + select SHA256 + default y + help + Enable this to support SHA256 checksum of FIT image contents. A + SHA256 checksum is a 256-bit (32-byte) hash value used to check that + the image contents have not been corrupted. SHA256 is recommended + for use in secure applications since (as at 2016) there is no known + feasible attack that could produce a 'collision' with differing + input data. Use this for the highest security. Note that only the + SHA256 variant is supported: SHA512 and others are not currently + supported in U-Boot. + config FIT_SIGNATURE bool "Enable signature verification of FIT uImages" depends on DM @@ -205,18 +220,22 @@ config FIT_IMAGE_POST_PROCESS injected into the FIT creation (i.e. the blobs would have been pre- processed before being added to the FIT image). +if SPL + config SPL_FIT bool "Support Flattened Image Tree within SPL" depends on SPL + select SPL_OF_LIBFDT config SPL_FIT_SIGNATURE bool "Enable signature verification of FIT firmware within SPL" - depends on SPL_FIT depends on SPL_DM + select SPL_FIT select SPL_RSA config SPL_LOAD_FIT bool "Enable SPL loading U-Boot as a FIT" + select SPL_FIT help Normally with the SPL framework a legacy image is generated as part of the build. This contains U-Boot along with information as to @@ -239,6 +258,26 @@ config SPL_FIT_IMAGE_POST_PROCESS injected into the FIT creation (i.e. the blobs would have been pre- processed before being added to the FIT image). +config SPL_FIT_SOURCE + string ".its source file for U-Boot FIT image" + depends on SPL_FIT + help + Specifies a (platform specific) FIT source file to generate the + U-Boot FIT image. This could specify further image to load and/or + execute. + +config SPL_FIT_GENERATOR + string ".its file generator script for U-Boot FIT image" + depends on SPL_FIT + default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI + help + Specifies a (platform specific) script file to generate the FIT + source file used to build the U-Boot FIT image file. This gets + passed a list of supported device tree file stub names to + include in the generated image. + +endif # SPL + endif # FIT config OF_BOARD_SETUP @@ -833,6 +833,10 @@ quiet_cmd_mkimage = MKIMAGE $@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) +quiet_cmd_mkfitimage = MKIMAGE $@ +cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \ + $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) + quiet_cmd_cat = CAT $@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@ @@ -952,6 +956,19 @@ quiet_cmd_cpp_cfg = CFG $@ cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< +# Boards with more complex image requirments can provide an .its source file +# or a generator script +ifneq ($(CONFIG_SPL_FIT_SOURCE),"") +U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE)) +else +ifneq ($(CONFIG_SPL_FIT_GENERATOR),"") +U_BOOT_ITS := u-boot.its +$(U_BOOT_ITS): FORCE + $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \ + $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@ +endif +endif + ifdef CONFIG_SPL_LOAD_FIT MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ @@ -984,6 +1001,9 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE $(call if_changed,mkimage) +u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE + $(call if_changed,mkfitimage) + u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) @@ -292,7 +292,7 @@ board_init_r(): - stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined and CONFIG_SPL_STACK_R_ADDR points into SDRAM - preloader_console_init() can be called here - typically this is - done by defining CONFIG_SPL_BOARD_INIT and then supplying a + done by selecting CONFIG_SPL_BOARD_INIT and then supplying a spl_board_init() function containing this call - loads U-Boot or (in falcon mode) Linux @@ -830,18 +830,9 @@ The following options need to be configured: CONFIG_CMD_CRC32 * crc32 CONFIG_CMD_DHCP * DHCP support CONFIG_CMD_DIAG * Diagnostics - CONFIG_CMD_DS4510 * ds4510 I2C gpio commands - CONFIG_CMD_DS4510_INFO * ds4510 I2C info command - CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd - CONFIG_CMD_DS4510_RST * ds4510 I2C rst command - CONFIG_CMD_DTT * Digital Therm and Thermostat CONFIG_CMD_ECHO echo arguments CONFIG_CMD_EDITENV edit env variable - CONFIG_CMD_EEPROM * EEPROM read/write support - CONFIG_CMD_EEPROM_LAYOUT* EEPROM layout aware commands CONFIG_CMD_ELF * bootelf, bootvx - CONFIG_CMD_ENV_CALLBACK * display details about env callbacks - CONFIG_CMD_ENV_FLAGS * display details about env flags CONFIG_CMD_ENV_EXISTS * check existence of env variable CONFIG_CMD_EXPORTENV * export the environment CONFIG_CMD_EXT2 * ext2 command support @@ -850,28 +841,18 @@ The following options need to be configured: that work for multiple fs types CONFIG_CMD_FS_UUID * Look up a filesystem UUID CONFIG_CMD_SAVEENV saveenv - CONFIG_CMD_FDC * Floppy Disk Support CONFIG_CMD_FAT * FAT command support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support - CONFIG_CMD_FUSE * Device fuse support - CONFIG_CMD_GETTIME * Get time since boot CONFIG_CMD_GO * the 'go' command (exec code) CONFIG_CMD_GREPENV * search environment - CONFIG_CMD_HASH * calculate hash / digest CONFIG_CMD_I2C * I2C serial bus support - CONFIG_CMD_IDE * IDE harddisk support CONFIG_CMD_IMI iminfo CONFIG_CMD_IMLS List all images found in NOR flash CONFIG_CMD_IMLS_NAND * List all images found in NAND flash - CONFIG_CMD_IMMAP * IMMR dump support - CONFIG_CMD_IOTRACE * I/O tracing for debugging CONFIG_CMD_IMPORTENV * import an environment CONFIG_CMD_INI * import data from an ini file into the env - CONFIG_CMD_IRQ * irqinfo CONFIG_CMD_ITEST Integer/string test of 2 values - CONFIG_CMD_JFFS2 * JFFS2 Support - CONFIG_CMD_KGDB * kgdb CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader) CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration (169.254.*.*) @@ -1095,7 +1076,7 @@ The following options need to be configured: disk/part_efi.c CONFIG_MTD_PARTITIONS Memory Technology Device partition table. - If IDE or SCSI support is enabled (CONFIG_CMD_IDE or + If IDE or SCSI support is enabled (CONFIG_IDE or CONFIG_SCSI) you must configure support for at least one non-MTD partition type as well. @@ -1742,29 +1723,6 @@ The following options need to be configured: the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should be at least 4MB. - CONFIG_LZMA - - If this option is set, support for lzma compressed - images is included. - - Note: The LZMA algorithm adds between 2 and 4KB of code and it - requires an amount of dynamic memory that is given by the - formula: - - (1846 + 768 << (lc + lp)) * sizeof(uint16) - - Where lc and lp stand for, respectively, Literal context bits - and Literal pos bits. - - This value is upper-bounded by 14MB in the worst case. Anyway, - for a ~4MB large kernel image, we have lc=3 and lp=0 for a - total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is - a very small buffer. - - Use the lzmainfo tool to determinate the lc and lp values and - then calculate the amount of needed dynamic memory (ensuring - the appropriate CONFIG_SYS_MALLOC_LEN value). - CONFIG_LZO If this option is set, support for LZO compressed images @@ -2328,17 +2286,6 @@ The following options need to be configured: If defined, then this indicates the I2C bus number for the RTC. If not defined, then U-Boot assumes that RTC is on I2C bus 0. - CONFIG_SYS_DTT_BUS_NUM - - If defined, then this indicates the I2C bus number for the DTT. - If not defined, then U-Boot assumes that DTT is on I2C bus 0. - - CONFIG_SYS_I2C_DTT_ADDR: - - If defined, specifies the I2C address of the DTT device. - If not defined, then U-Boot uses predefined value for - specified DTT device. - CONFIG_SOFT_I2C_READ_REPEATED_START defining this will force the i2c_read() function in @@ -2405,19 +2352,6 @@ The following options need to be configured: Specify the number of FPGA devices to support. - CONFIG_CMD_FPGA_LOADMK - - Enable support for fpga loadmk command - - CONFIG_CMD_FPGA_LOADP - - Enable support for fpga loadp command - load partial bitstream - - CONFIG_CMD_FPGA_LOADBP - - Enable support for fpga loadbp command - load partial bitstream - (Xilinx only) - CONFIG_SYS_FPGA_PROG_FEEDBACK Enable printing of hash marks during FPGA configuration. @@ -2746,37 +2680,14 @@ The following options need to be configured: but sometimes that is not allowed. - Hashing support: - CONFIG_CMD_HASH - - This enables a generic 'hash' command which can produce - hashes / digests from a few algorithms (e.g. SHA1, SHA256). - CONFIG_HASH_VERIFY Enable the hash verify command (hash -v). This adds to code size a little. - CONFIG_SHA1 - This option enables support of hashing using SHA1 - algorithm. The hash is calculated in software. - CONFIG_SHA256 - This option enables support of hashing using - SHA256 algorithm. The hash is calculated in software. - CONFIG_SHA_HW_ACCEL - This option enables hardware acceleration - for SHA1/SHA256 hashing. - This affects the 'hash' command and also the - hash_lookup_algo() function. - CONFIG_SHA_PROG_HW_ACCEL - This option enables - hardware-acceleration for SHA1/SHA256 progressive hashing. - Data can be streamed in a block at a time and the hashing - is performed in hardware. - Note: There is also a sha1sum command, which should perhaps be deprecated in favour of 'hash sha1'. -- Freescale i.MX specific commands: - CONFIG_CMD_HDMIDETECT - This enables 'hdmidet' command which returns true if an - HDMI monitor is detected. This command is i.MX 6 specific. - - bootcount support: CONFIG_BOOTCOUNT_LIMIT @@ -2973,15 +2884,6 @@ FIT uImage format: This define is introduced, as the legacy image format is enabled per default for backward compatibility. -- FIT image support: - CONFIG_FIT_DISABLE_SHA256 - Supporting SHA256 hashes has quite an impact on binary size. - For constrained systems sha256 hash support can be disabled - with this option. - - TODO(sjg@chromium.org): Adjust this option to be positive, - and move it to Kconfig - - Standalone program support: CONFIG_STANDALONE_LOAD_ADDR diff --git a/api/api_storage.c b/api/api_storage.c index a5357bc..f858f09 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -46,7 +46,7 @@ static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, NULL }, }; void dev_stor_init(void) { -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) specs[ENUM_IDE].max_dev = CONFIG_SYS_IDE_MAXDEVICE; specs[ENUM_IDE].enum_started = 0; specs[ENUM_IDE].enum_ended = 0; diff --git a/arch/Kconfig b/arch/Kconfig index 2528f50..02e887a 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -34,6 +34,7 @@ config M68K config MICROBLAZE bool "MicroBlaze architecture" select SUPPORT_OF_CONTROL + imply CMD_IRQ config MIPS bool "MIPS architecture" @@ -43,6 +44,7 @@ config MIPS config NDS32 bool "NDS32 architecture" + select SUPPORT_OF_CONTROL config NIOS2 bool "Nios II architecture" @@ -68,6 +70,12 @@ config SANDBOX select DM_SPI select DM_GPIO select DM_MMC + imply CMD_GETTIME + imply CMD_HASH + imply CMD_IO + imply CMD_IOTRACE + imply LZMA + imply CMD_LZMADEC config SH bool "SuperH architecture" @@ -86,6 +94,10 @@ config X86 select DM_SPI_FLASH select USB_EHCI_HCD select DM_MMC if MMC + imply CMD_FPGA_LOADMK + imply CMD_GETTIME + imply CMD_IO + imply CMD_IRQ config XTENSA bool "Xtensa architecture" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a17ba2c..2a3a36e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -281,6 +281,7 @@ choice config ARCH_AT91 bool "Atmel AT91" + select SPL_BOARD_INIT if SPL config TARGET_EDB93XX bool "Support edb93xx" @@ -502,6 +503,7 @@ config TARGET_BCM28155_AP config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7 + imply CMD_HASH config TARGET_BCMNSP bool "Support bcmnsp" @@ -553,6 +555,7 @@ config ARCH_KEYSTONE config ARCH_OMAP2PLUS bool "TI OMAP2+" select CPU_V7 + select SPL_BOARD_INIT if SPL select SUPPORT_SPL imply FIT @@ -674,6 +677,7 @@ config ARCH_ZYNQ select CPU_V7 select SUPPORT_SPL select OF_CONTROL + select SPL_BOARD_INIT if SPL select SPL_OF_CONTROL if SPL select DM select DM_ETH @@ -701,6 +705,7 @@ config ARCH_ZYNQMP select DM_SERIAL select SUPPORT_SPL select CLK + select SPL_BOARD_INIT if SPL select SPL_CLK select DM_USB if USB @@ -943,6 +948,7 @@ config ARCH_UNIPHIER select OF_CONTROL select OF_LIBFDT select PINCTRL + select SPL_BOARD_INIT if SPL select SPL_DM if SPL select SPL_LIBCOMMON_SUPPORT if SPL select SPL_LIBGENERIC_SUPPORT if SPL diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 0ff9045..4fd60d4 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -7,6 +7,7 @@ config MX6 select ARM_ERRATA_751472 if !MX6UL select ARM_ERRATA_761320 if !MX6UL select ARM_ERRATA_794072 if !MX6UL + imply CMD_FUSE config MX6D bool diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig index 8dfb4c9..80c1290 100644 --- a/arch/arm/cpu/armv7/mx7/Kconfig +++ b/arch/arm/cpu/armv7/mx7/Kconfig @@ -6,10 +6,12 @@ config MX7 select CPU_V7_HAS_VIRT select CPU_V7_HAS_NONSEC select ARCH_SUPPORT_PSCI + imply CMD_FUSE default y config MX7D select ROM_UNIFIED_SECTIONS + imply CMD_FUSE bool choice diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig index 25cbd12..cd8b8d2 100644 --- a/arch/arm/imx-common/Kconfig +++ b/arch/arm/imx-common/Kconfig @@ -55,3 +55,9 @@ config CMD_DEKBLOB Freescale secure boot mechanism. This command encapsulates and creates a blob of data. See also CMD_BLOB and doc/README.mxc_hab for more information. + +config CMD_HDMIDETECT + bool "Support the 'hdmidet' command" + help + This enables the 'hdmidet' command which detects if an HDMI monitor + is connected. diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index 831d0c0..9358397 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -10,7 +10,7 @@ #define BOOT0_MAGIC "eGON.BT0" #define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */ -#define SPL_HEADER_VERSION 1 +#define SPL_HEADER_VERSION 2 #ifdef CONFIG_SUNXI_HIGH_SRAM #define SPL_ADDR 0x10000 @@ -58,11 +58,24 @@ struct boot_file_head { * compatible format, ready to be imported via "env import -t". */ uint32_t fel_uEnv_length; - uint32_t reserved1[2]; + /* + * Offset of an ASCIIZ string (relative to the SPL header), which + * contains the default device tree name (CONFIG_DEFAULT_DEVICE_TREE). + * This is optional and may be set to NULL. Is intended to be used + * by flash programming tools for providing nice informative messages + * to the users. + */ + uint32_t dt_name_offset; + uint32_t reserved1; uint32_t boot_media; /* written here by the boot ROM */ - uint32_t reserved2[5]; /* padding, align to 64 bytes */ + /* A padding area (may be used for storing text strings) */ + uint32_t string_pool[13]; + /* The header must be a multiple of 32 bytes (for VBAR alignment) */ }; +/* Compile time check to assure proper alignment of structure */ +typedef char boot_file_head_not_multiple_of_32[1 - 2*(sizeof(struct boot_file_head) % 32)]; + #define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0) #endif diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index b0ca4bc..b0b3b93 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -8,12 +8,8 @@ #define __FSL_SECURE_BOOT_H #ifdef CONFIG_CHAIN_OF_TRUST -#define CONFIG_CMD_ESBC_VALIDATE #define CONFIG_FSL_SEC_MON -#define CONFIG_SHA_HW_ACCEL -#define CONFIG_SHA_PROG_HW_ACCEL -#define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_SPL_BUILD /* * Define the key hash for U-Boot here if public/private key pair used to @@ -30,7 +26,6 @@ #define CONFIG_KEY_REVOCATION #ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_HASH #ifndef CONFIG_SYS_RAMBOOT /* The key used for verification of next level images * is picked up from an Extension Table which has diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 53d4ed2..f162c14 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -44,8 +44,10 @@ obj-y += stack.o ifdef CONFIG_CPU_V7M obj-y += interrupts_m.o else ifdef CONFIG_ARM64 -obj-y += ccn504.o +obj-$(CONFIG_FSL_LAYERSCAPE) += ccn504.o +ifneq ($(CONFIG_GICV2)$(CONFIG_GICV3),) obj-y += gic_64.o +endif obj-y += interrupts_64.o else obj-y += interrupts.o diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 46981a5..5b6c5ea 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,6 +17,8 @@ config ARCH_EXYNOS5 bool "Exynos5 SoC family" select CPU_V7 select BOARD_EARLY_INIT_F + select SHA_HW_ACCEL + imply CMD_HASH help Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 3ea8dc3..cababdb 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -6,19 +6,23 @@ choice config TARGET_K2HK_EVM bool "TI Keystone 2 Kepler/Hawking EVM" + select SPL_BOARD_INIT if SPL imply DM_I2C config TARGET_K2E_EVM bool "TI Keystone 2 Edison EVM" + select SPL_BOARD_INIT if SPL imply DM_I2C config TARGET_K2L_EVM bool "TI Keystone 2 Lamar EVM" + select SPL_BOARD_INIT if SPL imply DM_I2C config TARGET_K2G_EVM bool "TI Keystone 2 Galileo EVM" select BOARD_LATE_INIT + select SPL_BOARD_INIT if SPL select TI_I2C_BOARD_DETECT imply DM_I2C diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index c7beb58..ba60071 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -95,7 +95,7 @@ /* * IDE Support on SATA ports */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_MVSATA_IDE #define CONFIG_IDE_PREINIT @@ -110,12 +110,12 @@ #define CONFIG_SYS_ATA_STRIDE 4 /* Controller supports 48-bits LBA addressing */ #define CONFIG_LBA48 -/* CONFIG_CMD_IDE requires some #defines for ATA registers */ +/* CONFIG_IDE requires some #defines for ATA registers */ #define CONFIG_SYS_IDE_MAXBUS 2 #define CONFIG_SYS_IDE_MAXDEVICE 2 /* ATA registers base is at SATA controller base */ #define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ /* * I2C related stuff diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 740dbdf..6be2ab5 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -14,6 +14,7 @@ config ROCKCHIP_RK3036 config ROCKCHIP_RK3188 bool "Support Rockchip RK3188" select CPU_V7 + select SPL_BOARD_INIT if SPL select SUPPORT_SPL select SUPPORT_TPL select SPL @@ -30,6 +31,7 @@ config ROCKCHIP_RK3188 config ROCKCHIP_RK3288 bool "Support Rockchip RK3288" select CPU_V7 + select SPL_BOARD_INIT if SPL select SUPPORT_SPL select SPL help diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 2563e79..45e5379 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -39,6 +39,7 @@ config TARGET_SOCFPGA_ARRIA5 config TARGET_SOCFPGA_ARRIA10 bool + select SPL_BOARD_INIT if SPL config TARGET_SOCFPGA_CYCLONE5 bool diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 8d9900e..7ced838 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -143,12 +143,16 @@ config MACH_SUN50I select SUNXI_GEN_SUN6I select SUNXI_HIGH_SRAM select SUPPORT_SPL + select FIT + select SPL_LOAD_FIT config MACH_SUN50I_H5 bool "sun50i (Allwinner H5)" select ARM64 select MACH_SUNXI_H3_H5 select SUNXI_HIGH_SRAM + select FIT + select SPL_LOAD_FIT endchoice diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index c67ffa5..940257b 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -49,6 +49,7 @@ config TEGRA_ARMV7_COMMON bool "Tegra 32-bit common options" select CPU_V7 select SPL + select SPL_BOARD_INIT if SPL select SUPPORT_SPL select TEGRA_COMMON select TEGRA_GPIO @@ -126,4 +127,20 @@ source "arch/arm/mach-tegra/tegra124/Kconfig" source "arch/arm/mach-tegra/tegra210/Kconfig" source "arch/arm/mach-tegra/tegra186/Kconfig" +config CMD_ENTERRCM + bool "Enable 'enterrcm' command" + default y + help + Tegra's boot ROM supports a mode whereby code may be downloaded and + flash-programmed over a USB connection. On dev boards, this is + typically entered by holding down a "force recovery" button and + resetting the CPU. However, not all boards have such a button (one + example is the Compulab Trimslice), so a method to enter RCM from + software is useful. + + Even on boards other than Trimslice, controlling this over a UART + may be useful, e.g. to allow simple remote control without the need + for mechanical button actuators, or hooking up relays/... to the + button. + endif diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig index 4fcd01d..d72ff46 100644 --- a/arch/nds32/Kconfig +++ b/arch/nds32/Kconfig @@ -11,8 +11,12 @@ choice config TARGET_ADP_AG101P bool "Support adp-ag101p" +config TARGET_ADP_AE3XX + bool "Support adp-ae3xx" + endchoice source "board/AndesTech/adp-ag101p/Kconfig" +source "board/AndesTech/adp-ae3xx/Kconfig" endmenu diff --git a/arch/nds32/cpu/n1213/Makefile b/arch/nds32/cpu/n1213/Makefile index 7d5ae96..3a9ada1 100644 --- a/arch/nds32/cpu/n1213/Makefile +++ b/arch/nds32/cpu/n1213/Makefile @@ -12,3 +12,4 @@ extra-y = start.o obj-$(if $(filter ag101,$(SOC)),y) += ag101/ +obj-$(if $(filter ae3xx,$(SOC)),y) += ae3xx/ diff --git a/arch/nds32/cpu/n1213/ae3xx/Makefile b/arch/nds32/cpu/n1213/ae3xx/Makefile new file mode 100644 index 0000000..07fa942 --- /dev/null +++ b/arch/nds32/cpu/n1213/ae3xx/Makefile @@ -0,0 +1,18 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# Copyright (C) 2011 Andes Technology Corporation +# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> +# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := cpu.o timer.o +obj-y += lowlevel_init.o + +ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG +obj-y += watchdog.o +endif diff --git a/arch/nds32/cpu/n1213/ae3xx/cpu.c b/arch/nds32/cpu/n1213/ae3xx/cpu.c new file mode 100644 index 0000000..26f878f --- /dev/null +++ b/arch/nds32/cpu/n1213/ae3xx/cpu.c @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* CPU specific code */ +#include <common.h> +#include <command.h> +#include <watchdog.h> +#include <asm/cache.h> + +#include <faraday/ftwdt010_wdt.h> + +/* + * cleanup_before_linux() is called just before we call linux + * it prepares the processor for linux + * + * we disable interrupt and caches. + */ +int cleanup_before_linux(void) +{ + disable_interrupts(); + + /* turn off I/D-cache */ + cache_flush(); + icache_disable(); + dcache_disable(); + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + disable_interrupts(); + panic("AE3XX wdt not support yet.\n"); +} diff --git a/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S b/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S new file mode 100644 index 0000000..d4bc2bc --- /dev/null +++ b/arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.pic + +.text + +#include <common.h> +#include <config.h> + +#include <asm/macro.h> +#include <generated/asm-offsets.h> + +/* + * parameters for the SDRAM controller + */ +#define SDMC_TP1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP1) +#define SDMC_TP2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP2) +#define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1) +#define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2) +#define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR) +#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR) + +#define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1 +#define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2 +#define SDMC_CR1_D CONFIG_SYS_FTSDMC021_CR1 +#define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2 + +#define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR +#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR + + +/* + * for Orca and Emerald + */ +#define BOARD_ID_REG 0x104 +#define BOARD_ID_FAMILY_MASK 0xfff000 +#define BOARD_ID_FAMILY_V5 0x556000 +#define BOARD_ID_FAMILY_K7 0x74b000 + +/* + * parameters for the static memory controller + */ +#define SMC_BANK0_CR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_CR) +#define SMC_BANK0_TPR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_TPR) + +#define SMC_BANK0_CR_D FTSMC020_BANK0_LOWLV_CONFIG +#define SMC_BANK0_TPR_D FTSMC020_BANK0_LOWLV_TIMING + +/* + * for Orca and Emerald + */ +#define AHBC_BSR4_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_4) +#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 + +/* + * parameters for the pmu controoler + */ +#define PMU_PDLLCR0_A (CONFIG_FTPMU010_BASE + FTPMU010_PDLLCR0) + +/* + * numeric 7 segment display + */ +.macro led, num + write32 CONFIG_DEBUG_LED, \num +.endm + +/* + * Waiting for SDRAM to set up + */ +.macro wait_sdram + li $r0, CONFIG_FTSDMC021_BASE +1: + lwi $r1, [$r0+FTSDMC021_CR2] + bnez $r1, 1b +.endm + +.globl mem_init +mem_init: + move $r11, $lp + li $r0, SMC_BANK0_CR_A + lwi $r1, [$r0+#0x00] + ori $r1, $r1, 0x8f0 + xori $r1, $r1, 0x8f0 + /* 16-bit mode */ + ori $r1, $r1, 0x60 + li $r2, 0x00153153 + swi $r1, [$r0+#0x00] + swi $r2, [$r0+#0x04] + move $lp, $r11 + ret + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +.globl lowlevel_init +lowlevel_init: + move $r10, $lp + jal remap + +#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) + jal enable_fpu +#endif + ret $r10 + +remap: + move $r11, $lp +relo_base: + mfusr $r0, $pc + +#ifdef CONFIG_MEM_REMAP + li $r4, 0x00000000 + li $r5, 0x80000000 + la $r6, _end@GOTOFF +1: + lmw.bim $r12, [$r5], $r19 + smw.bim $r12, [$r4], $r19 + blt $r5, $r6, 1b +#endif /* #ifdef CONFIG_MEM_REMAP */ + move $lp, $r11 +2: + ret + + /* + * enable_fpu: + * Some of Andes CPU version support FPU coprocessor, if so, + * and toolchain support FPU instruction set, we should enable it. + */ +#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) +enable_fpu: + mfsr $r0, $CPU_VER /* enable FPU if it exists */ + srli $r0, $r0, 3 + andi $r0, $r0, 1 + beqz $r0, 1f /* skip if no COP */ + mfsr $r0, $FUCOP_EXIST + srli $r0, $r0, 31 + beqz $r0, 1f /* skip if no FPU */ + mfsr $r0, $FUCOP_CTL + ori $r0, $r0, 1 + mtsr $r0, $FUCOP_CTL +1: + ret +#endif + +#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/arch/nds32/cpu/n1213/ae3xx/timer.c b/arch/nds32/cpu/n1213/ae3xx/timer.c new file mode 100644 index 0000000..a284bf5 --- /dev/null +++ b/arch/nds32/cpu/n1213/ae3xx/timer.c @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef CONFIG_TIMER +#include <common.h> +#include <asm/io.h> +#include <faraday/fttmr010.h> +#error "AE3XX timer only support DM flow" +#endif /* CONFIG_TIMER */ diff --git a/arch/nds32/cpu/n1213/ae3xx/watchdog.S b/arch/nds32/cpu/n1213/ae3xx/watchdog.S new file mode 100644 index 0000000..956c5f8 --- /dev/null +++ b/arch/nds32/cpu/n1213/ae3xx/watchdog.S @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch-ag101/ag101.h> +#include <linux/linkage.h> + +.text + +#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG +ENTRY(turnoff_watchdog) +#error "AE3XX not support wdt yet" +ENDPROC(turnoff_watchdog) +#endif diff --git a/arch/nds32/cpu/n1213/ag101/Makefile b/arch/nds32/cpu/n1213/ag101/Makefile index c21ce02..07fa942 100644 --- a/arch/nds32/cpu/n1213/ag101/Makefile +++ b/arch/nds32/cpu/n1213/ag101/Makefile @@ -11,10 +11,7 @@ # obj-y := cpu.o timer.o - -ifndef CONFIG_SKIP_LOWLEVEL_INIT obj-y += lowlevel_init.o -endif ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG obj-y += watchdog.o diff --git a/arch/nds32/cpu/n1213/ag101/cpu.c b/arch/nds32/cpu/n1213/ag101/cpu.c index 31d7271..9da0b31 100644 --- a/arch/nds32/cpu/n1213/ag101/cpu.c +++ b/arch/nds32/cpu/n1213/ag101/cpu.c @@ -31,16 +31,10 @@ int cleanup_before_linux(void) { disable_interrupts(); -#ifdef CONFIG_MMU /* turn off I/D-cache */ + cache_flush(); icache_disable(); dcache_disable(); - - /* flush I/D-cache */ - invalidate_icac(); - invalidate_dcac(); -#endif - return 0; } diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S index abdd340..452d814 100644 --- a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S +++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S @@ -86,25 +86,7 @@ bnez $r1, 1b .endm -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -.globl lowlevel_init -lowlevel_init: - move $r10, $lp - - led 0x0 - jal mem_init - - led 0x10 - jal remap - -#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) - led 0x1f - jal enable_fpu -#endif - - led 0x20 - ret $r10 - +.globl mem_init mem_init: move $r11, $lp @@ -124,9 +106,7 @@ mem_init: lwi $r1, [$r0+#0x00] ori $r1, $r1, 0x8f0 xori $r1, $r1, 0x8f0 - /* - * check board - */ + /* check board */ li $r3, CONFIG_FTPMU010_BASE + BOARD_ID_REG lwi $r3, [$r3] li $r4, BOARD_ID_FAMILY_MASK @@ -134,29 +114,21 @@ mem_init: li $r4, BOARD_ID_FAMILY_K7 xor $r4, $r3, $r4 beqz $r4, use_flash_16bit_boot - /* - * 32-bit mode - */ + /* 32-bit mode */ use_flash_32bit_boot: ori $r1, $r1, 0x50 li $r2, 0x00151151 j sdram_b0_cr - /* - * 16-bit mode - */ + /* 16-bit mode */ use_flash_16bit_boot: ori $r1, $r1, 0x60 li $r2, 0x00153153 - /* - * SRAM bank0 config - */ + /* SRAM bank0 config */ sdram_b0_cr: swi $r1, [$r0+#0x00] swi $r2, [$r0+#0x04] - /* - * config AHB Controller - */ + /* config AHB Controller */ led 0x02 /* @@ -192,6 +164,21 @@ sdram_b0_cr: move $lp, $r11 ret + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + +.globl lowlevel_init +lowlevel_init: + move $r10, $lp + led 0x10 + jal remap +#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) + led 0x1f + jal enable_fpu +#endif + led 0x20 + ret $r10 + remap: move $r11, $lp #ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */ @@ -203,9 +190,7 @@ relo_base: mfusr $r0, $pc #endif /* __NDS32_N1213_43U1H__ */ - /* - * Remapping - */ + /* Remapping */ led 0x1a write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001800 write32 SDMC_B1_BSR_A, SDMC_B1_BSR_D ! 0x00001880 diff --git a/arch/nds32/cpu/n1213/ag101/timer.c b/arch/nds32/cpu/n1213/ag101/timer.c index 758b354..0c03a10 100644 --- a/arch/nds32/cpu/n1213/ag101/timer.c +++ b/arch/nds32/cpu/n1213/ag101/timer.c @@ -8,7 +8,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - +#ifndef CONFIG_TIMER #include <common.h> #include <asm/io.h> #include <faraday/fttmr010.h> @@ -189,3 +189,4 @@ ulong get_tbclk(void) return CONFIG_SYS_CLK_FREQ; #endif } +#endif /* CONFIG_TIMER */ diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S index 99971fd..f9f9999 100644 --- a/arch/nds32/cpu/n1213/start.S +++ b/arch/nds32/cpu/n1213/start.S @@ -114,11 +114,39 @@ reset_gp: set_ivb: li $r0, 0x0 - /* turn on BTB */ mtsr $r0, $misc_ctl /* set IVIC, vector size: 4 bytes, base: 0x0 */ mtsr $r0, $ivb +/* + * MMU_CTL NTC0 Cacheable/Write-Back + */ + li $r0, ~0x3 + mfsr $r1, $mr8 + and $r1, $r1, $r0 + mtsr $r1, $mr8 +#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)) + li $r0, 0x4 + mfsr $r1, $mr0 + or $r1, $r1, $r0 + mtsr $r1, $mr0 +#endif + +#if !defined(CONFIG_SYS_ICACHE_OFF) + li $r0, 0x1 + mfsr $r1, $mr8 + or $r1, $r1, $r0 + mtsr $r1, $mr8 +#endif + +#if !defined(CONFIG_SYS_DCACHE_OFF) + li $r0, 0x2 + mfsr $r1, $mr8 + or $r1, $r1, $r0 + mtsr $r1, $mr8 +#endif + + jal mem_init #ifndef CONFIG_SKIP_LOWLEVEL_INIT jal lowlevel_init @@ -133,7 +161,6 @@ update_gp: ori $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4) add5.pc $gp #endif - /* * do critical initializations first (shall be in short time) * do self_relocation ASAP. @@ -161,11 +188,14 @@ update_gp: */ call_board_init_f: li $sp, CONFIG_SYS_INIT_SP_ADDR - li $r10, GD_SIZE /* get GD size */ - sub $sp, $sp, $r10 /* GD start addr */ - move $r10, $sp + move $r0, $sp + bal board_init_f_alloc_reserve + move $sp, $r0 + bal board_init_f_init_reserve +#ifdef CONFIG_DEBUG_UART + bal debug_uart_init +#endif li $r0, 0x00000000 - #ifdef __PIC__ #ifdef __NDS32_N1213_43U1H__ /* __NDS32_N1213_43U1H__ implies NDS32 V0 ISA */ @@ -201,12 +231,10 @@ stack_setup: la $r1, _end@GOTOFF move $r2, $r6 /* r2 <- scratch for copy_loop */ - copy_loop: - lwi.p $r7, [$r0], #4 - swi.p $r7, [$r2], #4 + lmw.bim $r11, [$r0], $r18 + smw.bim $r11, [$r2], $r18 blt $r0, $r1, copy_loop - /* * fix relocations related issues */ @@ -246,6 +274,8 @@ clbss_l: * initialization, now running from RAM. */ call_board_init_r: + bal invalidate_icache_all + bal flush_dcache_all la $r0, board_init_r@GOTOFF move $lp, $r0 /* offset of board_init_r() */ add $lp, $lp, $r9 /* real address of board_init_r() */ diff --git a/arch/nds32/dts/Makefile b/arch/nds32/dts/Makefile new file mode 100644 index 0000000..1d6b195 --- /dev/null +++ b/arch/nds32/dts/Makefile @@ -0,0 +1,15 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +dtb-$(CONFIG_TARGET_ADP_AG101P) += ag101p.dtb +dtb-$(CONFIG_TARGET_ADP_AE3XX) += ae3xx.dtb +targets += $(dtb-y) + +DTC_FLAGS += -R 4 -p 0x1000 + +PHONY += dtbs +dtbs: $(addprefix $(obj)/, $(dtb-y)) + @: + +clean-files := *.dtb diff --git a/arch/nds32/dts/ae3xx.dts b/arch/nds32/dts/ae3xx.dts new file mode 100644 index 0000000..9062760 --- /dev/null +++ b/arch/nds32/dts/ae3xx.dts @@ -0,0 +1,65 @@ +/dts-v1/; +/ { + compatible = "nds32 ae3xx"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + aliases { + uart0 = &serial0; + } ; + + chosen { + /* bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug bootmem_debug memblock=debug loglevel=7"; */ + bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7"; + stdout-path = "uart0:38400n8"; + tick-timer = &timer0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "andestech,n13"; + reg = <0>; + /* FIXME: to fill correct frqeuency */ + clock-frequency = <60000000>; + }; + }; + + intc: interrupt-controller { + compatible = "andestech,atnointc010"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + serial0: serial@f0300000 { + compatible = "andestech,uart16550", "ns16550a"; + reg = <0xf0300000 0x1000>; + interrupts = <7 4>; + clock-frequency = <14745600>; + reg-shift = <2>; + reg-offset = <32>; + no-loopback-test = <1>; + }; + + timer0: timer@f0400000 { + compatible = "andestech,atcpit100"; + reg = <0xf0400000 0x1000>; + interrupts = <2 4>; + clock-frequency = <30000000>; + }; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x88000000 0x1000>; + bank-width = <2>; + device-width = <1>; + }; + +}; diff --git a/arch/nds32/dts/ag101p.dts b/arch/nds32/dts/ag101p.dts new file mode 100644 index 0000000..91314b5 --- /dev/null +++ b/arch/nds32/dts/ag101p.dts @@ -0,0 +1,57 @@ +/dts-v1/; +/ { + compatible = "nds32 ag101p"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + aliases { + uart0 = &serial0; + } ; + + chosen { + /* bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0x99600000 debug bootmem_debug memblock=debug loglevel=7"; */ + bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0x99600000 debug loglevel=7"; + stdout-path = "uart0:38400n8"; + tick-timer = &timer0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "andestech,n13"; + reg = <0>; + /* FIXME: to fill correct frqeuency */ + clock-frequency = <60000000>; + }; + }; + + intc: interrupt-controller { + compatible = "andestech,atnointc010"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + serial0: serial@99600000 { + compatible = "andestech,uart16550", "ns16550a"; + reg = <0x99600000 0x1000>; + interrupts = <7 4>; + clock-frequency = <14745600>; + reg-shift = <2>; + no-loopback-test = <1>; + }; + + timer0: timer@98400000 { + compatible = "andestech,attmr010"; + reg = <0x98400000 0x1000>; + interrupts = <19 4>; + clock-frequency = <15000000>; + }; + +}; diff --git a/arch/nds32/include/asm/arch-ae3xx/ae3xx.h b/arch/nds32/include/asm/arch-ae3xx/ae3xx.h new file mode 100644 index 0000000..b074e84 --- /dev/null +++ b/arch/nds32/include/asm/arch-ae3xx/ae3xx.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2016 Andes Technology Corporation + * Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __AE3XX_H +#define __AE3XX_H + +/* Hardware register bases */ + +/* Static Memory Controller (SRAM) */ +#define CONFIG_FTSMC020_BASE 0xe0400000 +/* DMA Controller */ +#define CONFIG_FTDMAC020_BASE 0xf0c00000 +/* AHB-to-APB Bridge */ +#define CONFIG_FTAPBBRG020S_01_BASE 0xf0000000 +/* Reserved */ +#define CONFIG_RESERVED_01_BASE 0xe0500000 +/* Reserved */ +#define CONFIG_RESERVED_02_BASE 0xf0800000 +/* Reserved */ +#define CONFIG_RESERVED_03_BASE 0xf0900000 +/* Ethernet */ +#define CONFIG_FTMAC100_BASE 0xe0100000 +/* Reserved */ +#define CONFIG_RESERVED_04_BASE 0xf1000000 + +/* APB Device definitions */ + +/* UART1 */ +#define CONFIG_FTUART010_01_BASE 0xf0200000 +/* UART2 */ +#define CONFIG_FTUART010_02_BASE 0xf0300000 +/* Counter/Timers */ +#define CONFIG_FTTMR010_BASE 0xf0400000 +/* Watchdog Timer */ +#define CONFIG_FTWDT010_BASE 0xf0500000 +/* Real Time Clock */ +#define CONFIG_FTRTC010_BASE 0xf0600000 +/* GPIO */ +#define CONFIG_FTGPIO010_BASE 0xf0700000 +/* I2C */ +#define CONFIG_FTIIC010_BASE 0xf0a00000 +/* SD Controller */ +#define CONFIG_FTSDC010_BASE 0xf0e00000 + +/* The following address was not defined in Linux */ + +/* Synchronous Serial Port Controller (SSP) 01 */ +#define CONFIG_FTSSP010_01_BASE 0xf0d00000 +#endif /* __AE3XX_H */ diff --git a/arch/nds32/include/asm/bootm.h b/arch/nds32/include/asm/bootm.h new file mode 100644 index 0000000..6b10c07 --- /dev/null +++ b/arch/nds32/include/asm/bootm.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2013, Google Inc. + * + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef NDS32_BOOTM_H +#define NDS32_BOOTM_H + +extern void udc_disconnect(void); + +#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ + defined(CONFIG_CMDLINE_TAG) || \ + defined(CONFIG_INITRD_TAG) || \ + defined(CONFIG_SERIAL_TAG) || \ + defined(CONFIG_REVISION_TAG) +# define BOOTM_ENABLE_TAGS 1 +#else +# define BOOTM_ENABLE_TAGS 0 +#endif + +#ifdef CONFIG_SETUP_MEMORY_TAGS +# define BOOTM_ENABLE_MEMORY_TAGS 1 +#else +# define BOOTM_ENABLE_MEMORY_TAGS 0 +#endif + +#ifdef CONFIG_CMDLINE_TAG + #define BOOTM_ENABLE_CMDLINE_TAG 1 +#else + #define BOOTM_ENABLE_CMDLINE_TAG 0 +#endif + +#ifdef CONFIG_INITRD_TAG + #define BOOTM_ENABLE_INITRD_TAG 1 +#else + #define BOOTM_ENABLE_INITRD_TAG 0 +#endif + +#ifdef CONFIG_SERIAL_TAG + #define BOOTM_ENABLE_SERIAL_TAG 1 +void get_board_serial(struct tag_serialnr *serialnr); +#else + #define BOOTM_ENABLE_SERIAL_TAG 0 +static inline void get_board_serial(struct tag_serialnr *serialnr) +{ +} +#endif + +#ifdef CONFIG_REVISION_TAG + #define BOOTM_ENABLE_REVISION_TAG 1 +u32 get_board_rev(void); +#else + #define BOOTM_ENABLE_REVISION_TAG 0 +static inline u32 get_board_rev(void) +{ + return 0; +} +#endif + +#endif diff --git a/arch/nds32/include/asm/cache.h b/arch/nds32/include/asm/cache.h index 9038821..7e9aac8 100644 --- a/arch/nds32/include/asm/cache.h +++ b/arch/nds32/include/asm/cache.h @@ -16,6 +16,7 @@ void icache_disable(void); int dcache_status(void); void dcache_enable(void); void dcache_disable(void); +void cache_flush(void); #define DEFINE_GET_SYS_REG(reg) \ static inline unsigned long GET_##reg(void) \ @@ -30,10 +31,24 @@ void dcache_disable(void); enum cache_t {ICACHE, DCACHE}; DEFINE_GET_SYS_REG(ICM_CFG); DEFINE_GET_SYS_REG(DCM_CFG); -#define ICM_CFG_OFF_ISZ 6 /* I-cache line size */ -#define ICM_CFG_MSK_ISZ (0x7UL << ICM_CFG_OFF_ISZ) -#define DCM_CFG_OFF_DSZ 6 /* D-cache line size */ -#define DCM_CFG_MSK_DSZ (0x7UL << DCM_CFG_OFF_DSZ) +/* I-cache sets (# of cache lines) per way */ +#define ICM_CFG_OFF_ISET 0 +/* I-cache ways */ +#define ICM_CFG_OFF_IWAY 3 +#define ICM_CFG_MSK_ISET (0x7 << ICM_CFG_OFF_ISET) +#define ICM_CFG_MSK_IWAY (0x7 << ICM_CFG_OFF_IWAY) +/* D-cache sets (# of cache lines) per way */ +#define DCM_CFG_OFF_DSET 0 +/* D-cache ways */ +#define DCM_CFG_OFF_DWAY 3 +#define DCM_CFG_MSK_DSET (0x7 << DCM_CFG_OFF_DSET) +#define DCM_CFG_MSK_DWAY (0x7 << DCM_CFG_OFF_DWAY) +/* I-cache line size */ +#define ICM_CFG_OFF_ISZ 6 +#define ICM_CFG_MSK_ISZ (0x7UL << ICM_CFG_OFF_ISZ) +/* D-cache line size */ +#define DCM_CFG_OFF_DSZ 6 +#define DCM_CFG_MSK_DSZ (0x7UL << DCM_CFG_OFF_DSZ) /* * The current upper bound for NDS32 L1 data cache line sizes is 32 bytes. diff --git a/arch/nds32/include/asm/config.h b/arch/nds32/include/asm/config.h index 054cc48..7289217 100644 --- a/arch/nds32/include/asm/config.h +++ b/arch/nds32/include/asm/config.h @@ -8,5 +8,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_LMB #endif diff --git a/arch/nds32/include/asm/mach-types.h b/arch/nds32/include/asm/mach-types.h index 1959d7e..99904f9 100644 --- a/arch/nds32/include/asm/mach-types.h +++ b/arch/nds32/include/asm/mach-types.h @@ -13,6 +13,7 @@ extern unsigned int __machine_arch_type; /* see arch/arm/kernel/arch.c for a description of these */ #define MACH_TYPE_ADPAG101P 1 +#define MACH_TYPE_ADPAE3XX 2 #ifdef CONFIG_ARCH_ADPAG101P # ifdef machine_arch_type diff --git a/arch/nds32/lib/Makefile b/arch/nds32/lib/Makefile index 1a0d26f..c88ad72 100644 --- a/arch/nds32/lib/Makefile +++ b/arch/nds32/lib/Makefile @@ -11,4 +11,5 @@ obj-y += cache.o obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_CMD_GO) += boot.o obj-y += interrupts.o diff --git a/arch/nds32/lib/boot.c b/arch/nds32/lib/boot.c new file mode 100644 index 0000000..f9c1c6b --- /dev/null +++ b/arch/nds32/lib/boot.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Rick Chen, Andes Technology Corporation <rick@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#include <common.h> +#include <command.h> + +DECLARE_GLOBAL_DATA_PTR; + +unsigned long do_go_exec(ulong (*entry)(int, char * const []), + int argc, char * const argv[]) +{ + cleanup_before_linux(); + + return entry(argc, argv); +} diff --git a/arch/nds32/lib/bootm.c b/arch/nds32/lib/bootm.c index 8b0b28f..4c95a41 100644 --- a/arch/nds32/lib/bootm.c +++ b/arch/nds32/lib/bootm.c @@ -11,9 +11,16 @@ #include <image.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> +#include <asm/bootm.h> DECLARE_GLOBAL_DATA_PTR; +int arch_fixup_fdt(void *blob) +{ + return 0; +} + + #if defined(CONFIG_SETUP_MEMORY_TAGS) || \ defined(CONFIG_CMDLINE_TAG) || \ defined(CONFIG_INITRD_TAG) || \ @@ -67,6 +74,15 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) debug("## Transferring control to Linux (at address %08lx) ...\n", (ulong)theKernel); + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { +#ifdef CONFIG_OF_LIBFDT + debug("using: FDT\n"); + if (image_setup_linux(images)) { + printf("FDT creation failed! hanging..."); + hang(); + } +#endif + } else if (BOOTM_ENABLE_TAGS) { #if defined(CONFIG_SETUP_MEMORY_TAGS) || \ defined(CONFIG_CMDLINE_TAG) || \ defined(CONFIG_INITRD_TAG) || \ @@ -101,16 +117,17 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) udc_disconnect(); } #endif - + } cleanup_before_linux(); - - theKernel(0, machid, bd->bi_boot_params); + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) + theKernel(0, machid, (unsigned long)images->ft_addr); + else + theKernel(0, machid, bd->bi_boot_params); /* does not return */ return 1; } - #if defined(CONFIG_SETUP_MEMORY_TAGS) || \ defined(CONFIG_CMDLINE_TAG) || \ defined(CONFIG_INITRD_TAG) || \ @@ -130,7 +147,6 @@ static void setup_start_tag(bd_t *bd) params = tag_next(params); } - #ifdef CONFIG_SETUP_MEMORY_TAGS static void setup_memory_tags(bd_t *bd) { @@ -148,7 +164,6 @@ static void setup_memory_tags(bd_t *bd) } #endif /* CONFIG_SETUP_MEMORY_TAGS */ - static void setup_commandline_tag(bd_t *bd, char *commandline) { char *p; @@ -176,7 +191,6 @@ static void setup_commandline_tag(bd_t *bd, char *commandline) params = tag_next(params); } - #ifdef CONFIG_INITRD_TAG static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end) { @@ -224,7 +238,6 @@ void setup_revision_tag(struct tag **in_params) } #endif /* CONFIG_REVISION_TAG */ - static void setup_end_tag(bd_t *bd) { params->hdr.tag = ATAG_NONE; diff --git a/arch/nds32/lib/cache.c b/arch/nds32/lib/cache.c index 866dc1a..8469481 100644 --- a/arch/nds32/lib/cache.c +++ b/arch/nds32/lib/cache.c @@ -7,32 +7,56 @@ */ #include <common.h> +#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)) +static inline unsigned long CACHE_SET(unsigned char cache) +{ + if (cache == ICACHE) + return 64 << ((GET_ICM_CFG() & ICM_CFG_MSK_ISET) \ + >> ICM_CFG_OFF_ISET); + else + return 64 << ((GET_DCM_CFG() & DCM_CFG_MSK_DSET) \ + >> DCM_CFG_OFF_DSET); +} + +static inline unsigned long CACHE_WAY(unsigned char cache) +{ + if (cache == ICACHE) + return 1 + ((GET_ICM_CFG() & ICM_CFG_MSK_IWAY) \ + >> ICM_CFG_OFF_IWAY); + else + return 1 + ((GET_DCM_CFG() & DCM_CFG_MSK_DWAY) \ + >> DCM_CFG_OFF_DWAY); +} static inline unsigned long CACHE_LINE_SIZE(enum cache_t cache) { if (cache == ICACHE) return 8 << (((GET_ICM_CFG() & ICM_CFG_MSK_ISZ) \ - >> ICM_CFG_OFF_ISZ) - 1); + >> ICM_CFG_OFF_ISZ) - 1); else return 8 << (((GET_DCM_CFG() & DCM_CFG_MSK_DSZ) \ - >> DCM_CFG_OFF_DSZ) - 1); + >> DCM_CFG_OFF_DSZ) - 1); } +#endif -void flush_dcache_range(unsigned long start, unsigned long end) +#ifndef CONFIG_SYS_ICACHE_OFF +void invalidate_icache_all(void) { - unsigned long line_size; + unsigned long end, line_size; + line_size = CACHE_LINE_SIZE(ICACHE); + end = line_size * CACHE_WAY(ICACHE) * CACHE_SET(ICACHE); + do { + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end)); - line_size = CACHE_LINE_SIZE(DCACHE); + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end)); - while (end > start) { - asm volatile ( - "\n\tcctl %0, L1D_VA_WB" - "\n\tcctl %0, L1D_VA_INVAL" - : - : "r" (start) - ); - start += line_size; - } + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end)); + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end)); + } while (end > 0); } void invalidate_icache_range(unsigned long start, unsigned long end) @@ -50,27 +74,6 @@ void invalidate_icache_range(unsigned long start, unsigned long end) } } -void invalidate_dcache_range(unsigned long start, unsigned long end) -{ - unsigned long line_size; - - line_size = CACHE_LINE_SIZE(DCACHE); - while (end > start) { - asm volatile ( - "\n\tcctl %0, L1D_VA_INVAL" - : - : "r"(start) - ); - start += line_size; - } -} - -void flush_cache(unsigned long addr, unsigned long size) -{ - flush_dcache_range(addr, addr + size); - invalidate_icache_range(addr, addr + size); -} - void icache_enable(void) { asm volatile ( @@ -107,6 +110,81 @@ int icache_status(void) return ret; } +#else +void invalidate_icache_all(void) +{ +} + +void invalidate_icache_range(unsigned long start, unsigned long end) +{ +} + +void icache_enable(void) +{ +} + +void icache_disable(void) +{ +} + +int icache_status(void) +{ + return 0; +} + +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void dcache_wbinval_all(void) +{ + unsigned long end, line_size; + line_size = CACHE_LINE_SIZE(DCACHE); + end = line_size * CACHE_WAY(DCACHE) * CACHE_SET(DCACHE); + do { + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end)); + __asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end)); + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end)); + __asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end)); + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end)); + __asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end)); + end -= line_size; + __asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end)); + __asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end)); + + } while (end > 0); +} + +void flush_dcache_range(unsigned long start, unsigned long end) +{ + unsigned long line_size; + + line_size = CACHE_LINE_SIZE(DCACHE); + + while (end > start) { + asm volatile ( + "\n\tcctl %0, L1D_VA_WB" + "\n\tcctl %0, L1D_VA_INVAL" : : "r" (start) + ); + start += line_size; + } +} + +void invalidate_dcache_range(unsigned long start, unsigned long end) +{ + unsigned long line_size; + + line_size = CACHE_LINE_SIZE(DCACHE); + while (end > start) { + asm volatile ( + "\n\tcctl %0, L1D_VA_INVAL" : : "r"(start) + ); + start += line_size; + } +} + void dcache_enable(void) { asm volatile ( @@ -131,7 +209,6 @@ void dcache_disable(void) int dcache_status(void) { int ret; - asm volatile ( "mfsr $p0, $mr8\n\t" "andi %0, $p0, 0x02\n\t" @@ -139,6 +216,52 @@ int dcache_status(void) : : "memory" ); - return ret; } + +#else +void dcache_wbinval_all(void) +{ +} + +void flush_dcache_range(unsigned long start, unsigned long end) +{ +} + +void invalidate_dcache_range(unsigned long start, unsigned long end) +{ +} + +void dcache_enable(void) +{ +} + +void dcache_disable(void) +{ +} + +int dcache_status(void) +{ + return 0; +} + +#endif + + +void flush_dcache_all(void) +{ + dcache_wbinval_all(); +} + +void cache_flush(void) +{ + flush_dcache_all(); + invalidate_icache_all(); +} + + +void flush_cache(unsigned long addr, unsigned long size) +{ + flush_dcache_range(addr, addr + size); + invalidate_icache_range(addr, addr + size); +} diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 01e9008..f37a9cb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -33,6 +33,8 @@ config MPC85xx select SYS_FSL_DDR select SYS_FSL_DDR_BE imply USB_EHCI_HCD if USB + imply CMD_HASH + imply CMD_IRQ config MPC86xx bool "MPC86xx" @@ -45,9 +47,12 @@ config 8xx config 4xx bool "PPC4xx" select CREATE_ARCH_SYMLINK + imply CMD_IRQ endchoice +source "arch/powerpc/lib/Kconfig" + source "arch/powerpc/cpu/mpc512x/Kconfig" source "arch/powerpc/cpu/mpc5xx/Kconfig" source "arch/powerpc/cpu/mpc5xxx/Kconfig" diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig index 5d49228..6ba0dd4 100644 --- a/arch/powerpc/cpu/mpc5xxx/Kconfig +++ b/arch/powerpc/cpu/mpc5xxx/Kconfig @@ -59,6 +59,7 @@ config TARGET_O3DNT config TARGET_DIGSY_MTC bool "Support digsy_mtc" + imply CMD_IRQ config TARGET_PCM030 bool "Support pcm030" diff --git a/arch/powerpc/cpu/mpc5xxx/ide.c b/arch/powerpc/cpu/mpc5xxx/ide.c index 9003b77..d1f4349 100644 --- a/arch/powerpc/cpu/mpc5xxx/ide.c +++ b/arch/powerpc/cpu/mpc5xxx/ide.c @@ -8,7 +8,7 @@ */ #include <common.h> -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #include <mpc5xxx.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 02e43bc..0772b7c 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -49,6 +49,7 @@ config TARGET_MPC8349EMDS config TARGET_MPC8349ITX bool "Support MPC8349ITX" + imply CMD_IRQ config TARGET_MPC837XEMDS bool "Support MPC837XEMDS" diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 31c0964..88d56a9 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -4,6 +4,14 @@ menu "mpc85xx CPU" config SYS_CPU default "mpc85xx" +config CMD_ERRATA + bool "Enable the 'errata' command" + depends on MPC85xx + default y + help + This enables the 'errata' command which displays a list of errata + work-arounds which are enabled for the current board. + choice prompt "Target select" optional @@ -124,6 +132,7 @@ config TARGET_P1010RDB_PA select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select SUPPORT_TPL + imply CMD_EEPROM config TARGET_P1010RDB_PB bool "Support P1010RDB_PB" @@ -131,6 +140,7 @@ config TARGET_P1010RDB_PB select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select SUPPORT_TPL + imply CMD_EEPROM config TARGET_P1022DS bool "Support P1022DS" @@ -141,54 +151,63 @@ config TARGET_P1022DS config TARGET_P1023RDB bool "Support P1023RDB" select ARCH_P1023 + imply CMD_EEPROM config TARGET_P1020MBG bool "Support P1020MBG-PC" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1020 + imply CMD_EEPROM config TARGET_P1020RDB_PC bool "Support P1020RDB-PC" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1020 + imply CMD_EEPROM config TARGET_P1020RDB_PD bool "Support P1020RDB-PD" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1020 + imply CMD_EEPROM config TARGET_P1020UTM bool "Support P1020UTM" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1020 + imply CMD_EEPROM config TARGET_P1021RDB bool "Support P1021RDB" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1021 + imply CMD_EEPROM config TARGET_P1024RDB bool "Support P1024RDB" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1024 + imply CMD_EEPROM config TARGET_P1025RDB bool "Support P1025RDB" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P1025 + imply CMD_EEPROM config TARGET_P2020RDB bool "Support P2020RDB-PC" select SUPPORT_SPL select SUPPORT_TPL select ARCH_P2020 + imply CMD_EEPROM config TARGET_P1_TWR bool "Support p1_twr" @@ -211,6 +230,7 @@ config TARGET_T1024QDS select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select PHYS_64BIT + imply CMD_EEPROM config TARGET_T1023RDB bool "Support T1023RDB" @@ -218,6 +238,7 @@ config TARGET_T1023RDB select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select PHYS_64BIT + imply CMD_EEPROM config TARGET_T1024RDB bool "Support T1024RDB" @@ -225,12 +246,14 @@ config TARGET_T1024RDB select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select PHYS_64BIT + imply CMD_EEPROM config TARGET_T1040QDS bool "Support T1040QDS" select ARCH_T1040 select BOARD_LATE_INIT if CHAIN_OF_TRUST select PHYS_64BIT + imply CMD_EEPROM config TARGET_T1040RDB bool "Support T1040RDB" @@ -377,6 +400,7 @@ config ARCH_B4420 select SYS_FSL_SEC_COMPAT_4 select SYS_PPC64 select FSL_IFC + imply CMD_EEPROM config ARCH_B4860 bool @@ -402,6 +426,7 @@ config ARCH_B4860 select SYS_FSL_SEC_COMPAT_4 select SYS_PPC64 select FSL_IFC + imply CMD_EEPROM config ARCH_BSC9131 bool @@ -415,6 +440,7 @@ config ARCH_BSC9131 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_4 select FSL_IFC + imply CMD_EEPROM config ARCH_BSC9132 bool @@ -432,6 +458,7 @@ config ARCH_BSC9132 select SYS_FSL_SEC_COMPAT_4 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_IFC + imply CMD_EEPROM config ARCH_C29X bool @@ -565,6 +592,7 @@ config ARCH_P1010 select SYS_FSL_SEC_COMPAT_4 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_IFC + imply CMD_EEPROM config ARCH_P1011 bool @@ -649,6 +677,7 @@ config ARCH_P1024 select SYS_FSL_SEC_COMPAT_2 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_ELBC + imply CMD_EEPROM config ARCH_P1025 bool @@ -678,6 +707,7 @@ config ARCH_P2020 select SYS_FSL_SEC_COMPAT_2 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_ELBC + imply CMD_EEPROM config ARCH_P2041 bool @@ -821,6 +851,7 @@ config ARCH_T1023 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_5 select FSL_IFC + imply CMD_EEPROM config ARCH_T1024 bool @@ -838,6 +869,7 @@ config ARCH_T1024 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_5 select FSL_IFC + imply CMD_EEPROM config ARCH_T1040 bool diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 38121c1..77e8fd4 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -137,6 +137,12 @@ config CMD_CHIP_CONFIG and control the CPU and peripehrals clocks. The programmed configuration is then used when the board boots. +config CMD_ECCTEST + bool "Enable the 'ecctest' command" + help + This command tests memory ECC by single and double error bit + injection. + source "board/amcc/acadia/Kconfig" source "board/amcc/bamboo/Kconfig" source "board/amcc/bubinga/Kconfig" diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 62ce816..76921ee 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -99,9 +99,7 @@ #define CONFIG_SPL_UBOOT_KEY_HASH NULL #endif /* ifdef CONFIG_SPL_BUILD */ -#define CONFIG_CMD_ESBC_VALIDATE #define CONFIG_FSL_SEC_MON -#define CONFIG_SHA_PROG_HW_ACCEL #ifndef CONFIG_SPL_BUILD /* diff --git a/arch/powerpc/lib/Kconfig b/arch/powerpc/lib/Kconfig new file mode 100644 index 0000000..987cec9 --- /dev/null +++ b/arch/powerpc/lib/Kconfig @@ -0,0 +1,8 @@ +config CMD_IMMAP + bool "Enable various commands to dump IMMR information" + help + This enables various commands such as: + + siuinfo - print System Interface Unit (SIU) registers + memcinfo - print Memory Controller registers + sitinfo - print System Integration Timers (SIT) registers diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 4f68613..e09bd9a 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -33,9 +33,10 @@ obj-$(CONFIG_BAT_RW) += bat_rw.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cache.o obj-y += extable.o +obj-$(CONFIG_CMD_IMMAP) += immap.o obj-y += interrupts.o obj-$(CONFIG_CMD_KGDB) += kgdb.o -obj-$(CONFIG_CMD_IDE) += ide.o +obj-$(CONFIG_IDE) += ide.o obj-y += stack.o obj-y += time.o diff --git a/cmd/immap.c b/arch/powerpc/lib/immap.c index 1414f9a..1414f9a 100644 --- a/cmd/immap.c +++ b/arch/powerpc/lib/immap.c diff --git a/board/AndesTech/adp-ae3xx/Kconfig b/board/AndesTech/adp-ae3xx/Kconfig new file mode 100644 index 0000000..8ec69d6 --- /dev/null +++ b/board/AndesTech/adp-ae3xx/Kconfig @@ -0,0 +1,18 @@ +if TARGET_ADP_AE3XX + +config SYS_CPU + default "n1213" + +config SYS_BOARD + default "adp-ae3xx" + +config SYS_VENDOR + default "AndesTech" + +config SYS_SOC + default "ae3xx" + +config SYS_CONFIG_NAME + default "adp-ae3xx" + +endif diff --git a/board/AndesTech/adp-ae3xx/MAINTAINERS b/board/AndesTech/adp-ae3xx/MAINTAINERS new file mode 100644 index 0000000..02e5a19 --- /dev/null +++ b/board/AndesTech/adp-ae3xx/MAINTAINERS @@ -0,0 +1,6 @@ +ADP-AG101P BOARD +M: Andes <uboot@andestech.com> +S: Maintained +F: board/AndesTech/adp-ae3xx/ +F: include/configs/adp-ae3xx.h +F: configs/adp-ae3xx_defconfig diff --git a/board/AndesTech/adp-ae3xx/Makefile b/board/AndesTech/adp-ae3xx/Makefile new file mode 100644 index 0000000..842dfb4 --- /dev/null +++ b/board/AndesTech/adp-ae3xx/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2016 Andes Technology Corporation +# Rick Chen, Andes Technology Corporation <rick@andestech.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := adp-ae3xx.o diff --git a/board/AndesTech/adp-ae3xx/adp-ae3xx.c b/board/AndesTech/adp-ae3xx/adp-ae3xx.c new file mode 100644 index 0000000..ab174fa --- /dev/null +++ b/board/AndesTech/adp-ae3xx/adp-ae3xx.c @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#if defined(CONFIG_FTMAC100) +#include <netdev.h> +#endif +#include <linux/io.h> +#include <faraday/ftsdc010.h> +#include <faraday/ftsmc020.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initializations + */ +int board_init(void) +{ + /* + * refer to BOOT_PARAMETER_PA_BASE within + * "linux/arch/nds32/include/asm/misc_spec.h" + */ + printf("Board: %s\n" , CONFIG_SYS_BOARD); + gd->bd->bi_arch_number = MACH_TYPE_ADPAE3XX; + gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400; + return 0; +} + +int dram_init(void) +{ + unsigned long sdram_base = PHYS_SDRAM_0; + unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE; + unsigned long actual_size; + actual_size = get_ram_size((void *)sdram_base, expected_size); + gd->ram_size = actual_size; + if (expected_size != actual_size) { + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + } + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_0; + gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1; + gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#if defined(CONFIG_FTMAC100) +int board_eth_init(bd_t *bd) +{ + return ftmac100_initialize(bd); +} +#endif + +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else { + return 0; + } +} + +int board_mmc_init(bd_t *bis) +{ +#ifndef CONFIG_DM_MMC +#ifdef CONFIG_FTSDC010 + ftsdc010_mmc_init(0); +#endif +#endif + return 0; +} diff --git a/board/AndesTech/adp-ag101p/adp-ag101p.c b/board/AndesTech/adp-ag101p/adp-ag101p.c index 805a266..0fd6fb0 100644 --- a/board/AndesTech/adp-ag101p/adp-ag101p.c +++ b/board/AndesTech/adp-ag101p/adp-ag101p.c @@ -7,8 +7,10 @@ */ #include <common.h> +#if defined(CONFIG_FTMAC100) #include <netdev.h> -#include <asm/io.h> +#endif +#include <linux/io.h> #include <faraday/ftsdc010.h> #include <faraday/ftsmc020.h> @@ -25,6 +27,7 @@ int board_init(void) * refer to BOOT_PARAMETER_PA_BASE within * "linux/arch/nds32/include/asm/misc_spec.h" */ + printf("Board: %s\n" , CONFIG_SYS_BOARD); gd->bd->bi_arch_number = MACH_TYPE_ADPAG101P; gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400; @@ -59,10 +62,12 @@ int dram_init_banksize(void) return 0; } +#if defined(CONFIG_FTMAC100) int board_eth_init(bd_t *bd) { return ftmac100_initialize(bd); } +#endif ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) { @@ -78,6 +83,8 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) int board_mmc_init(bd_t *bis) { +#ifdef CONFIG_FTSDC010 ftsdc010_mmc_init(0); +#endif return 0; } diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig index 8a9a9be..53b606e 100644 --- a/board/freescale/common/Kconfig +++ b/board/freescale/common/Kconfig @@ -1,6 +1,19 @@ config CHAIN_OF_TRUST depends on !FIT_SIGNATURE && SECURE_BOOT imply CMD_BLOB + imply CMD_HASH if ARM select FSL_CAAM + select SPL_BOARD_INIT if (ARM && SPL) + select SHA_HW_ACCEL + select SHA_PROG_HW_ACCEL bool default y + +config CMD_ESBC_VALIDATE + bool "Enable the 'esbc_validate' and 'esbc_halt' commands" + default y if CHAIN_OF_TRUST + help + This option enables two commands used for secure booting: + + esbc_validate - validate signature using RSA verification + esbc_halt - put the core in spin loop (Secure Boot Only) diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c index c2cc2d7..3318368 100644 --- a/board/freescale/m5253demo/m5253demo.c +++ b/board/freescale/m5253demo/m5253demo.c @@ -88,7 +88,7 @@ int testdram(void) return (0); } -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #include <ata.h> int ide_preinit(void) { @@ -133,7 +133,7 @@ void ide_set_reset(int idereset) setbits_8(&ata->cr, 0x01); } } -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #ifdef CONFIG_DRIVER_DM9000 diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index c1ed431..2c6afad 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -81,7 +81,7 @@ int testdram(void) return (0); } -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #include <ata.h> int ide_preinit(void) { @@ -126,4 +126,4 @@ void ide_set_reset(int idereset) setbits_8(&ata->cr, 0x01); } } -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index d6b0650..1e35970 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -88,7 +88,7 @@ int testdram(void) return (0); } -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #include <ata.h> int ide_preinit(void) diff --git a/board/gateworks/gw_ventana/Kconfig b/board/gateworks/gw_ventana/Kconfig index ccce98e..5d1bae4 100644 --- a/board/gateworks/gw_ventana/Kconfig +++ b/board/gateworks/gw_ventana/Kconfig @@ -9,4 +9,17 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "gw_ventana" +config CMD_EECONFIG + bool "Enable the 'econfig' command" + help + Provides access to EEPROM configuration on Gateworks Ventana + +config CMD_GSC + bool "Enable the 'gsc' command" + help + Provides access to the GSC configuration: + + gsc sleep - sleeps for a period of seconds + gsc wd - enables / disables the watchdog + endif diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c index e400d19..b531786 100644 --- a/board/gdsys/405ep/dlvision-10g.c +++ b/board/gdsys/405ep/dlvision-10g.c @@ -10,7 +10,6 @@ #include <asm/processor.h> #include <asm/io.h> #include <asm/ppc4xx-gpio.h> -#include <dtt.h> #include "405ep.h" #include <gdsys_fpga.h> @@ -61,8 +60,13 @@ struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; int misc_init_r(void) { - /* startup fans */ - dtt_init(); + /* + * Note: DTT has been removed. Please use UCLASS_THERMAL. + * + * startup fans + * + * dtt_init(); + */ return 0; } diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c index 81b4965..1484469 100644 --- a/board/gdsys/405ep/io.c +++ b/board/gdsys/405ep/io.c @@ -11,7 +11,6 @@ #include <asm/io.h> #include <asm/ppc4xx-gpio.h> -#include <dtt.h> #include <miiphy.h> #include "405ep.h" @@ -41,8 +40,13 @@ struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; int misc_init_r(void) { - /* startup fans */ - dtt_init(); + /* + * Note: DTT has been removed. Please use UCLASS_THERMAL. + * + * startup fans + * + * dtt_init(); + */ return 0; } diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c index ff0edb2..ad88af2 100644 --- a/board/gdsys/405ep/neo.c +++ b/board/gdsys/405ep/neo.c @@ -10,7 +10,6 @@ #include <asm/processor.h> #include <asm/io.h> #include <asm/ppc4xx-gpio.h> -#include <dtt.h> #include "405ep.h" #include <gdsys_fpga.h> @@ -32,8 +31,13 @@ struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; int misc_init_r(void) { - /* startup fans */ - dtt_init(); + /* + * Note: DTT has been removed. Please use UCLASS_THERMAL. + * + * startup fans + * + * dtt_init(); + */ return 0; } diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c index 0a7baaa..9ef965b 100644 --- a/board/gdsys/405ex/io64.c +++ b/board/gdsys/405ex/io64.c @@ -26,7 +26,6 @@ #include <miiphy.h> #include <i2c.h> -#include <dtt.h> DECLARE_GLOBAL_DATA_PTR; @@ -70,8 +69,13 @@ static inline void blank_string(int size) */ int misc_init_r(void) { - /* startup fans */ - dtt_init(); + /* + * Note: DTT has been removed. Please use UCLASS_THERMAL. + * + * startup fans + * + * dtt_init(); + */ #ifdef CONFIG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ diff --git a/board/gdsys/mpc8308/Kconfig b/board/gdsys/mpc8308/Kconfig index 9a1a3a2..cb29c25 100644 --- a/board/gdsys/mpc8308/Kconfig +++ b/board/gdsys/mpc8308/Kconfig @@ -23,3 +23,8 @@ config SYS_CONFIG_NAME default "strider" endif + +config CMD_IOLOOP + bool "Enable 'ioloop' and 'ioreflect' commands" + help + These commands provide FPGA tests. diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c index b8bc045..6c33eeb 100644 --- a/board/intercontrol/digsy_mtc/digsy_mtc.c +++ b/board/intercontrol/digsy_mtc/digsy_mtc.c @@ -325,7 +325,7 @@ void pci_init_board(void) } #endif -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #ifdef CONFIG_IDE_RESET @@ -369,7 +369,7 @@ void ide_set_reset(int idereset) setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); } #endif /* CONFIG_IDE_RESET */ -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #ifdef CONFIG_OF_BOARD_SETUP static void ft_delete_node(void *fdt, const char *compat) diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index ea24eaa..52d2766 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -259,7 +259,7 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) void init_ide_reset (void) { diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c index 983559e..bdd980d 100644 --- a/board/phytec/pcm030/pcm030.c +++ b/board/phytec/pcm030/pcm030.c @@ -176,7 +176,7 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif /* CONFIG_OF_BOARD_SETUP */ -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) #define GPIO_PSC2_4 0x02000000UL @@ -206,4 +206,4 @@ void ide_set_reset(int idereset) } else setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4); } -#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */ +#endif /* defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) */ diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 1c88173..a512a20 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -72,7 +72,6 @@ F: configs/q8_a33_tablet_1024x600_defconfig F: include/configs/sun9i.h F: configs/Merrii_A80_Optimus_defconfig F: include/configs/sun50i.h -F: configs/pine64_plus_defconfig A20-OLIMEX-SOM-EVB BOARD M: Marcus Cooper <codekipper@gmail.com> @@ -263,6 +262,11 @@ M: Andre Przywara <andre.przywara@arm.com> S: Maintained F: configs/orangepi_pc2_defconfig +PINE64 BOARDS +M: Andre Przywara <andre.przywara@arm.com> +S: Maintained +F: configs/pine64_plus_defconfig + R16 EVB PARROT BOARD M: Quentin Schulz <quentin.schulz@free-electrons.com> S: Maintained diff --git a/board/sunxi/README.pine64 b/board/sunxi/README.pine64 deleted file mode 100644 index 5553415..0000000 --- a/board/sunxi/README.pine64 +++ /dev/null @@ -1,98 +0,0 @@ -Pine64 board README -==================== - -The Pine64(+) is a single board computer equipped with an AArch64 capable ARMv8 -compliant Allwinner A64 SoC. -This chip has ARM Cortex A-53 cores and thus can run both in AArch32 -(compatible to 32-bit ARMv7) and AArch64 modes. Upon reset the SoC starts -in AArch32 mode and executes 32-bit code from the Boot ROM (BROM). -This has some implications on U-Boot. - -Quick start -============ -- Get hold of a boot0.img file (see below for more details). -- Get the boot0img tool source from the tools directory in [1] and compile - that on your host. -- Build U-Boot: -$ export CROSS_COMPILE=aarch64-linux-gnu- -$ make pine64_plus_defconfig -$ make -- You also need a compiled ARM Trusted Firmware (ATF) binary. Checkout the - "allwinner" branch from the github repository [2] and build it: -$ export CROSS_COMPILE=aarch64-linux-gnu- -$ make PLAT=sun50iw1p1 DEBUG=1 bl31 - The resulting binary is build/sun50iw1p1/debug/bl31.bin. - -Now put an empty (or disposable) micro SD card in your card reader and learn -its device file name, replacing /dev/sd<x> below with the result (that could -be /dev/mmcblk<x> as well): - -$ ./boot0img --device /dev/sd<x> -e -u u-boot.bin -B boot0.img \ - -d trampoline64:0x44000 -s bl31.bin -a 0x44008 -p 100 -(either copying the respective files to the working directory or specifying -the paths directly) - -This will create a new partition table (with a 100 MB FAT boot partition), -copies boot0.img, ATF and U-Boot to the proper locations on the SD card and -will fill in the magic Allwinner header to be recognized by boot0. -Prefix the above call with "sudo" if you don't have write access to the -uSD card. You can also use "-o output.img" instead of "--device /dev/sd<x>" -to create an image file and "dd" that to the uSD card. -Omitting the "-p" option will skip the partition table. - -Now put this uSD card in the board and power it on. You should be greeted by -the U-Boot prompt. - - -Main U-Boot -============ -The main U-Boot proper is a real 64-bit ARMv8 port and runs entirely in the -64-bit AArch64 mode. It can load any AArch64 code, EFI applications or arm64 -Linux kernel images (often named "Image") using the booti command. -Launching 32-bit code and kernels is technically possible, though not without -drawbacks (or hacks to avoid them) and currently not implemented. - -SPL support -============ -The main task of the SPL support is to bring up the DRAM controller and make -DRAM actually accessible. At the moment there is no documentation or source -code available which would do this. -There are currently two ways to overcome this situation: using a tainted 32-bit -SPL (involving some hacks and resulting in a non-redistributable binary, thus -not described here) or using the Allwinner boot0 blob. - -boot0 method -------------- -boot0 is Allwiner's secondary program loader and it can be used as some kind -of SPL replacement to get U-Boot up and running. -The binary is a 32 KByte blob and contained on every Pine64 image distributed -so far. It can be easily extracted from a micro SD card or an image file: -# dd if=/dev/sd<x> of=boot0.bin bs=8k skip=1 count=4 -where /dev/sd<x> is the device name of the uSD card or the name of the image -file. Apparently Allwinner allows re-distribution of this proprietary code -as-is. -For the time being this boot0 blob is the only redistributable way of making -U-Boot work on the Pine64. Beside loading the various parts of the (original) -firmware it also switches the core into AArch64 mode. -The original boot0 code looks for U-Boot at a certain place on an uSD card -(at 19096 KB), also it expects a header with magic bytes and a checksum. -There is a tool called boot0img[1] which takes a boot0.bin image and a compiled -U-Boot binary (plus other binaries) and will populate that header accordingly. -To make space for the magic header, the pine64_plus_defconfig will make sure -there is sufficient space at the beginning of the U-Boot binary. -boot0img will also take care of putting the different binaries at the right -places on the uSD card and works around unused, but mandatory parts by using -trampoline code. See the output of "boot0img -h" for more information. -boot0img can also patch boot0 to avoid loading U-Boot from 19MB, instead -fetching it from just behind the boot0 binary (-B option). - -FEL boot -========= -FEL is the name of the Allwinner defined USB boot protocol built-in the -mask ROM of most Allwinner SoCs. It allows to bootstrap a board solely -by using the USB-OTG interface and a host port on another computer. -Since FEL boot does not work with boot0, it requires the libdram hack, which -is not described here. - -[1] https://github.com/apritzel/pine64/ -[2] https://github.com/apritzel/arm-trusted-firmware.git diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 new file mode 100644 index 0000000..c492f74 --- /dev/null +++ b/board/sunxi/README.sunxi64 @@ -0,0 +1,165 @@ +Allwinner 64-bit boards README +============================== + +Newer Allwinner SoCs feature ARMv8 cores (ARM Cortex-A53) with support for +both the 64-bit AArch64 mode and the ARMv7 compatible 32-bit AArch32 mode. +Examples are the Allwinner A64 (used for instance on the Pine64 board) or +the Allwinner H5 SoC (as used on the OrangePi PC 2). +These SoCs are wired to start in AArch32 mode on reset and execute 32-bit +code from the Boot ROM (BROM). As this has some implications on U-Boot, this +file describes how to make full use of the 64-bit capabilities. + +Quick Start / Overview +====================== +- Build the ARM Trusted Firmware binary (see "ARM Trusted Firmware (ATF)" below) +- Build U-Boot (see "SPL/U-Boot" below) +- Transfer to an uSD card (see "microSD card" below) +- Boot and enjoy! + +Building the firmware +===================== + +The Allwinner A64/H5 firmware consists of three parts: U-Boot's SPL, an +ARM Trusted Firmware (ATF) build and the U-Boot proper. +The SPL will load both ATF and U-Boot proper along with the right device +tree blob (.dtb) and will pass execution to ATF (in EL3), which in turn will +drop into the U-Boot proper (in EL2). +As the ATF binary will become part of the U-Boot image file, you will need +to build it first. + + ARM Trusted Firmware (ATF) +---------------------------- +Checkout the "allwinner" branch from the github repository [1] and build it: +$ export CROSS_COMPILE=aarch64-linux-gnu- +$ make PLAT=sun50iw1p1 DEBUG=1 bl31 +The resulting binary is build/sun50iw1p1/debug/bl31.bin. Either put the +location of this file into the BL31 environment variable or copy this to +the root of your U-Boot build directory (or create a symbolic link). +$ export BL31=/src/arm-trusted-firmware/build/sun50iw1p1/debug/bl31.bin + (adjust the actual path accordingly) + + SPL/U-Boot +------------ +Both U-Boot proper and the SPL are using the 64-bit mode. As the boot ROM +enters the SPL still in AArch32 secure SVC mode, there is some shim code to +enter AArch64 very early. The rest of the SPL runs in AArch64 EL3. +U-Boot proper runs in EL2 and can load any AArch64 code (using the "go" +command), EFI applications (with "bootefi") or arm64 Linux kernel images +(often named "Image"), using the "booti" command. + +$ make clean +$ export CROSS_COMPILE=aarch64-linux-gnu- +$ make pine64_plus_defconfig +$ make + +This will build the SPL in spl/sunxi-spl.bin and a FIT image called u-boot.itb, +which contains the rest of the firmware. + + +Boot process +============ +The on-die BROM code will try several methods to load and execute the firmware. +On a typical board like the Pine64 this will result in the following boot order: + +1) Reading 32KB from sector 16 (@8K) of the microSD card to SRAM A1. If the +BROM finds the magic "eGON" header in the first bytes, it will execute that +code. If not (no SD card at all or invalid magic), it will: +2) Try to read 32KB from sector 16 (@8K) of memory connected to the MMC2 +controller, typically an on-board eMMC chip. If there is no eMMC or it does +not contain a valid boot header, it will: +3) Initialize the SPI0 controller and try to access a NOR flash connected to +it (using the CS0 pin). If a flash chip is found, the BROM will load the +first 32KB (from offset 0) into SRAM A1. Now it checks for the magic eGON +header and checksum and will execute the code upon finding it. If not, it will: +4) Initialize the USB OTG controller and will wait for a host to connect to +it, speaking the Allwinner proprietary (but deciphered) "FEL" USB protocol. + + +To boot the Pine64 board, you can use U-Boot and any of the described methods. + +FEL boot (USB OTG) +------------------ +FEL is the name of the Allwinner defined USB boot protocol built in the +mask ROM of most Allwinner SoCs. It allows to bootstrap a board solely +by using the USB-OTG interface and a host port on another computer. +As the FEL mode is controlled by the boot ROM, it expects to be running in +AArch32. For now the AArch64 SPL cannot properly return into FEL mode, so the +feature is disabled in the configuration at the moment. + +microSD card +------------ +Transfer the SPL and the U-Boot FIT image directly to an uSD card: +# dd if=spl/sunxi-spl.bin of=/dev/sdx bs=8k seek=1 +# dd if=u-boot.itb of=/dev/sdx bs=8k seek=5 +# sync +(replace /dev/sdx with you SD card device file name, which could be +/dev/mmcblk[x] as well). + +Alternatively you can concatenate the SPL and the U-Boot FIT image into a +single file and transfer that instead: +$ cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin +# dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1 + +You can partition the microSD card, but leave the first MB unallocated (most +partitioning tools will do this anyway). + +NOR flash +--------- +Some boards (like the SoPine, Pinebook or the OrangePi PC2) come with a +soldered SPI NOR flash chip. On other boards like the Pine64 such a chip +can be connected to the SPI0/CS0 pins on the PI-2 headers. +Create the SPL and FIT image like described above for the SD card. +Now connect either an "A to A" USB cable to the upper USB port on the Pine64 +or get an adaptor and use a regular A-microB cable connected to it. Other +boards often have a proper micro-B USB socket connected to the USB OTB port. +Remove a microSD card from the slot and power on the board. +On your host computer download and build the sunxi-tools package[2], then +use "sunxi-fel" to access the board: +$ ./sunxi-fel ver -v -p +This should give you an output starting with: AWUSBFEX soc=00001689(A64) ... +Now use the sunxi-fel tool to write to the NOR flash: +$ ./sunxi-fel spiflash-write 0 spl/sunxi-spl.bin +$ ./sunxi-fel spiflash-write 32768 u-boot.itb +Now boot the board without an SD card inserted and you should see the +U-Boot prompt on the serial console. + +(Legacy) boot0 method +--------------------- +boot0 is Allwiner's secondary program loader and it can be used as some kind +of SPL replacement to get U-Boot up and running from an microSD card. +For some time using boot0 was the only option to get the Pine64 booted. +With working DRAM init code in U-Boot's SPL this is no longer necessary, +but this method is described here for the sake of completeness. +Please note that this method works only with the boot0 files shipped with +A64 based boards, the H5 uses an incompatible layout which is not supported +by this method. + +The boot0 binary is a 32 KByte blob and contained in the official Pine64 images +distributed by Pine64 or Allwinner. It can be easily extracted from a micro +SD card or an image file: +# dd if=/dev/sd<x> of=boot0.bin bs=8k skip=1 count=4 +where /dev/sd<x> is the device name of the uSD card or the name of the image +file. Apparently Allwinner allows re-distribution of this proprietary code +"as-is". +This boot0 blob takes care of DRAM initialisation and loads the remaining +firmware parts, then switches the core into AArch64 mode. +The original boot0 code looks for U-Boot at a certain place on an uSD card +(at 19096 KB), also it expects a header with magic bytes and a checksum. +There is a tool called boot0img[3] which takes a boot0.bin image and a compiled +U-Boot binary (plus other binaries) and will populate that header accordingly. +To make space for the magic header, the pine64_plus_defconfig will make sure +there is sufficient space at the beginning of the U-Boot binary. +boot0img will also take care of putting the different binaries at the right +places on the uSD card and works around unused, but mandatory parts by using +trampoline code. See the output of "boot0img -h" for more information. +boot0img can also patch boot0 to avoid loading U-Boot from 19MB, instead +fetching it from just behind the boot0 binary (-B option). +$ ./boot0img -o firmware.img -B boot0.img -u u-boot-dtb.bin -e -s bl31.bin \ +-a 0x44008 -d trampoline64:0x44000 +Then write this image to a microSD card, replacing /dev/sdx with the right +device file (see above): +$ dd if=firmware.img of=/dev/sdx bs=8k seek=1 + +[1] https://github.com/apritzel/arm-trusted-firmware.git +[2] git://github.com/linux-sunxi/sunxi-tools.git +[3] https://github.com/apritzel/pine64/ diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 4404edb..f79bd5c 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -512,7 +512,6 @@ int board_mmc_init(bd_t *bis) void sunxi_board_init(void) { int power_failed = 0; - unsigned long ramsize; #ifdef CONFIG_SY8106A_POWER power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT); @@ -573,9 +572,9 @@ void sunxi_board_init(void) #endif #endif printf("DRAM:"); - ramsize = sunxi_dram_init(); - printf(" %d MiB\n", (int)(ramsize >> 20)); - if (!ramsize) + gd->ram_size = sunxi_dram_init(); + printf(" %d MiB\n", (int)(gd->ram_size >> 20)); + if (!gd->ram_size) hang(); /* @@ -758,3 +757,32 @@ int ft_board_setup(void *blob, bd_t *bd) #endif return 0; } + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + struct boot_file_head *spl = (void *)(ulong)SPL_ADDR; + const char *cmp_str = (void *)(ulong)SPL_ADDR; + + /* Check if there is a DT name stored in the SPL header and use that. */ + if (spl->dt_name_offset) { + cmp_str += spl->dt_name_offset; + } else { +#ifdef CONFIG_DEFAULT_DEVICE_TREE + cmp_str = CONFIG_DEFAULT_DEVICE_TREE; +#else + return 0; +#endif + }; + +/* Differentiate the two Pine64 board DTs by their DRAM size. */ + if (strstr(name, "-pine64") && strstr(cmp_str, "-pine64")) { + if ((gd->ram_size > 512 * 1024 * 1024)) + return !strstr(name, "plus"); + else + return !!strstr(name, "plus"); + } else { + return strcmp(name, cmp_str); + } +} +#endif diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh new file mode 100755 index 0000000..b1d6e0e --- /dev/null +++ b/board/sunxi/mksunxi_fit_atf.sh @@ -0,0 +1,81 @@ +#!/bin/sh +# +# script to generate FIT image source for 64-bit sunxi boards with +# ARM Trusted Firmware and multiple device trees (given on the command line) +# +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...] + +[ -z "$BL31" ] && BL31="bl31.bin" + +if [ ! -f $BL31 ]; then + echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2 + echo "Please read the section on ARM Trusted Firmware (ATF) in board/sunxi/README.sunxi64" >&2 + BL31=/dev/null +fi + +cat << __HEADER_EOF +/dts-v1/; + +/ { + description = "Configuration to load ATF before U-Boot"; + #address-cells = <1>; + + images { + uboot@1 { + description = "U-Boot (64-bit)"; + data = /incbin/("u-boot-nodtb.bin"); + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x4a000000>; + }; + atf@1 { + description = "ARM Trusted Firmware"; + data = /incbin/("$BL31"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x44000>; + entry = <0x44000>; + }; +__HEADER_EOF + +cnt=1 +for dtname in $* +do + cat << __FDT_IMAGE_EOF + fdt@$cnt { + description = "$(basename $dtname .dtb)"; + data = /incbin/("$dtname"); + type = "flat_dt"; + compression = "none"; + }; +__FDT_IMAGE_EOF + cnt=$((cnt+1)) +done + +cat << __CONF_HEADER_EOF + }; + configurations { + default = "config@1"; + +__CONF_HEADER_EOF + +cnt=1 +for dtname in $* +do + cat << __CONF_SECTION_EOF + config@$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot@1"; + loadables = "atf@1"; + fdt = "fdt@$cnt"; + }; +__CONF_SECTION_EOF + cnt=$((cnt+1)) +done + +cat << __ITS_EOF + }; +}; +__ITS_EOF diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index 08c39d9..1187cf5 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -20,6 +20,7 @@ config TI_COMMON_CMD_OPTIONS imply CMD_BOOTZ imply CMD_DFU if USB_GADGET_DOWNLOAD imply CMD_DHCP + imply CMD_EEPROM imply CMD_EXT2 imply CMD_EXT4 imply CMD_EXT4_WRITE diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index c48ab11..cb99afd 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -312,7 +312,7 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) #if defined (CONFIG_MINIFAP) #define SM501_POWER_MODE0_GATE 0x00000040UL diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c index 73227c1..e680b7b 100644 --- a/board/v38b/v38b.c +++ b/board/v38b/v38b.c @@ -224,7 +224,7 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) void init_ide_reset(void) { debug("init_ide_reset\n"); diff --git a/board/work-microwave/work_92105/Kconfig b/board/work-microwave/work_92105/Kconfig index 74f004f..1fde4b2 100644 --- a/board/work-microwave/work_92105/Kconfig +++ b/board/work-microwave/work_92105/Kconfig @@ -12,4 +12,9 @@ config SYS_SOC config SYS_CONFIG_NAME default "work_92105" +config CMD_HD44760 + bool "Enable 'hd44780' LCD-control comand" + help + This controls the LCD driver. + endif diff --git a/board/work-microwave/work_92105/work_92105_display.c b/board/work-microwave/work_92105/work_92105_display.c index 3d7438e..37a7363 100644 --- a/board/work-microwave/work_92105/work_92105_display.c +++ b/board/work-microwave/work_92105/work_92105_display.c @@ -346,4 +346,4 @@ U_BOOT_CMD( "HD44780 LCD driver control", hd44780_help_text ); -#endif /* CONFIG_CMD_HD44780 */ +#endif /* CONFIG_CMD_HD44760 */ diff --git a/cmd/Kconfig b/cmd/Kconfig index d9f7151..5ee52f6 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -314,6 +314,22 @@ config CMD_ENV_EXISTS Check if a variable is defined in the environment for use in shell scripting. +config CMD_ENV_CALLBACK + bool "env callbacks - print callbacks and their associated variables" + help + Some environment variable have callbacks defined by + U_BOOT_ENV_CALLBACK. These are called when the variable changes. + For example changing "baudrate" adjust the serial baud rate. This + command lists the currently defined callbacks. + +config CMD_ENV_FLAGS + bool "env flags -print variables that have non-default flags" + help + Some environment variables have special flags that control their + behaviour. For example, serial# can only be written once and cannot + be deleted. This command shows the variables that have special + flags. + endmenu menu "Memory commands" @@ -334,10 +350,59 @@ config CMD_MEMORY config CMD_CRC32 bool "crc32" + select HASH default y help Compute CRC32. +config CMD_EEPROM + bool "eeprom - EEPROM subsystem" + help + (deprecated, needs conversion to driver model) + Provides commands to read and write EEPROM (Electrically Erasable + Programmable Read Only Memory) chips that are connected over an + I2C bus. + +config CMD_EEPROM_LAYOUT + bool "Enable layout-aware eeprom commands" + depends on CMD_EEPROM + help + (deprecated, needs conversion to driver model) + When enabled, additional eeprom sub-commands become available. + + eeprom print - prints the contents of the eeprom in a human-readable + way (eeprom layout fields, and data formatted to be fit for human + consumption). + + eeprom update - allows user to update eeprom fields by specifying + the field name, and providing the new data in a human readable format + (same format as displayed by the eeprom print command). + + Both commands can either auto detect the layout, or be told which + layout to use. + + Feature API: + __weak int parse_layout_version(char *str) + - override to provide your own layout name parsing + __weak void __eeprom_layout_assign(struct eeprom_layout *layout, + int layout_version); + - override to setup the layout metadata based on the version + __weak int eeprom_layout_detect(unsigned char *data) + - override to provide your own algorithm for detecting layout + version + eeprom_field.c + - contains various printing and updating functions for common + types of eeprom fields. Can be used for defining + custom layouts. + +config EEPROM_LAYOUT_HELP_STRING + string "Tells user what layout names are supported" + depends on CMD_EEPROM_LAYOUT + default "<not defined>" + help + Help printed with the LAYOUT VERSIONS part of the 'eeprom' + command's help. + config CMD_MD5SUM bool "md5sum" default n @@ -373,6 +438,17 @@ config CMD_MEMINFO help Display memory information. +endmenu + +menu "Compression commands" + +config CMD_LZMADEC + bool "lzmadec" + select LZMA + help + Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) + image from memory. + config CMD_UNZIP bool "unzip" help @@ -419,6 +495,57 @@ config CMD_DEMO option is to use sandbox and pass the -d point to sandbox's u-boot.dtb file. +config CMD_IDE + bool "ide - Support for IDE drivers" + select IDE + help + Provides an 'ide' command which allows accessing the IDE drive, + reseting the IDE interface, printing the partition table and + geting device info. It also enables the 'diskboot' command which + permits booting from an IDE drive. + +config CMD_IO + bool "io - Support for performing I/O accesses" + help + Provides an 'iod' command to display I/O space and an 'iow' command + to write values to the I/O space. This can be useful for manually + checking the state of devices during boot when debugging device + drivers, etc. + +config CMD_IOTRACE + bool "iotrace - Support for tracing I/O activity" + help + Provides an 'iotrace' command which supports recording I/O reads and + writes in a trace buffer in memory . It also maintains a checksum + of the trace records (even if space is exhausted) so that the + sequence of I/O accesses can be verified. + + When debugging drivers it is useful to see what I/O accesses were + done and in what order. + + Even if the individual accesses are of little interest it can be + useful to verify that the access pattern is consistent each time + an operation is performed. In this case a checksum can be used to + characterise the operation of a driver. The checksum can be compared + across different runs of the operation to verify that the driver is + working properly. + + In particular, when performing major refactoring of the driver, where + the access pattern should not change, the checksum provides assurance + that the refactoring work has not broken the driver. + + This works by sneaking into the io.h heder for an architecture and + redirecting I/O accesses through iotrace's tracing mechanism. + + For now no commands are provided to examine the trace buffer. The + format is fairly simple, so 'md' is a reasonable substitute. + + Note: The checksum feature is only useful for I/O regions where the + contents do not change outside of software control. Where this is not + suitable you can fall back to manually comparing the addresses. It + might be useful to enhance tracing to only checksum the accesses and + not the data read/written. + config CMD_LOADB bool "loadb" default y @@ -529,6 +656,48 @@ config CMD_FPGA help FPGA support. +config CMD_FPGA_LOADBP + bool "fpga loadbp - load partial bitstream (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGA_LOADFS + bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a FAT filesystem. + +config CMD_FPGA_LOADMK + bool "fpga loadmk - load bitstream from image" + depends on CMD_FPGA + help + Supports loading an FPGA device from a image generated by mkimage. + +config CMD_FPGA_LOADP + bool "fpga loadp - load partial bitstream" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGAD + bool "fpgad - dump FPGA registers" + help + (legacy, needs conversion to driver model) + Provides a way to dump FPGA registers by calling the board-specific + fpga_get_reg() function. This functions similarly to the 'md' + command. + +config CMD_FUSE + bool "fuse - support for the fuse subssystem" + help + (deprecated - needs conversion to driver model) + This allows reading, sensing, programming or overriding fuses + which control the behaviour of the device. The command uses the + fuse_...() API. + config CMD_REMOTEPROC bool "remoteproc" depends on REMOTEPROC @@ -540,6 +709,11 @@ config CMD_GPIO help GPIO support. +config CMD_FDC + bool "fdcboot - Boot from floppy device" + help + The 'fdtboot' command allows booting an image from a floppy disk. + endmenu @@ -647,6 +821,14 @@ config CMD_LINK_LOCAL help Acquire a network IP address using the link-local protocol +config CMD_ETHSW + bool "ethsw" + help + Allow control of L2 Ethernet switch commands. These are supported + by the vsc9953 Ethernet driver at present. Sub-commands allow + operations such as enabling / disabling a port and + viewing/maintaining the filtering database (FDB) + endmenu menu "Misc commands" @@ -727,6 +909,14 @@ config CMD_TIME help Run commands and summarize execution time. +config CMD_GETTIME + bool "gettime - read elapsed time" + help + Enable the 'gettime' command which reads the elapsed time since + U-Boot started running. This shows the time in seconds and + milliseconds. See also the 'bootstage' command which provides more + flexibility for boot timing. + # TODO: rename to CMD_SLEEP config CMD_MISC bool "sleep" @@ -869,6 +1059,15 @@ config CMD_BLOB generation/use as key for cryptographic operation. Key modifier should be 16 byte long. +config CMD_HASH + bool "Support 'hash' command" + select HASH + help + This provides a way to hash data in memory using various supported + algorithms (such as SHA1, MD5, CRC32). The computed digest can be + saved to memory or to an environment variable. It is also possible + to verify a hash against data in memory. + config CMD_TPM bool "Enable the 'tpm' command" depends on TPM @@ -957,6 +1156,15 @@ config CMD_FS_UUID help Enables fsuuid command for filesystem UUID. +config CMD_JFFS2 + bool "jffs2 command" + select FS_JFFS2 + help + Enables commands to support the JFFS2 (Journalling Flash File System + version 2) filesystem. This enables fsload, ls and fsinfo which + provide the ability to load files, list directories and obtain + filesystem information. + config CMD_MTDPARTS depends on ARCH_SUNXI bool "MTD partition support" @@ -995,6 +1203,23 @@ config CMD_DIAG available tests and running either all the tests, or specific tests identified by name. +config CMD_IRQ + bool "irq - Show information about interrupts" + depends on !ARM && !MIPS && !SH && !MPC512X + help + This enables two commands: + + interrupts - enable or disable interrupts + irqinfo - print device-specific interrupt information + +config CMD_KGDB + bool "kgdb - Allow debugging of U-Boot with gdb" + help + This enables a 'kgdb' command which allows gdb to connect to U-Boot + over a serial link for debugging purposes. This allows + single-stepping, inspecting variables, etc. This is supported only + on PowerPC at present. + endmenu config CMD_UBI diff --git a/cmd/Makefile b/cmd/Makefile index e987868..9ea56e9 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -43,7 +43,6 @@ ifdef CONFIG_POST obj-$(CONFIG_CMD_DIAG) += diag.o endif obj-$(CONFIG_CMD_DISPLAY) += display.o -obj-$(CONFIG_CMD_DTT) += dtt.o obj-$(CONFIG_CMD_ECHO) += echo.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o obj-$(CONFIG_CMD_EEPROM) += eeprom.o @@ -69,7 +68,6 @@ obj-$(CONFIG_CMD_I2C) += i2c.o obj-$(CONFIG_CMD_IOTRACE) += iotrace.o obj-$(CONFIG_CMD_HASH) += hash.o obj-$(CONFIG_CMD_IDE) += ide.o disk.o -obj-$(CONFIG_CMD_IMMAP) += immap.o obj-$(CONFIG_CMD_INI) += ini.o obj-$(CONFIG_CMD_IRQ) += irq.o obj-$(CONFIG_CMD_ITEST) += itest.o @@ -129,9 +127,7 @@ obj-$(CONFIG_CMD_UBI) += ubi.o obj-$(CONFIG_CMD_UBIFS) += ubifs.o obj-$(CONFIG_CMD_UNIVERSE) += universe.o obj-$(CONFIG_CMD_UNZIP) += unzip.o -ifdef CONFIG_LZMA obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o -endif obj-$(CONFIG_CMD_USB) += usb.o disk.o obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o diff --git a/cmd/cramfs.c b/cmd/cramfs.c index 4e75de8..49ee36c 100644 --- a/cmd/cramfs.c +++ b/cmd/cramfs.c @@ -39,7 +39,7 @@ # define OFFSET_ADJUSTMENT (flash_info[id.num].start[0]) #endif -#ifndef CONFIG_CMD_JFFS2 +#ifndef CONFIG_FS_JFFS2 #include <linux/stat.h> char *mkmodestr(unsigned long mode, char *str) { @@ -70,7 +70,7 @@ char *mkmodestr(unsigned long mode, char *str) str[10] = '\0'; return str; } -#endif /* CONFIG_CMD_JFFS2 */ +#endif /* CONFIG_FS_JFFS2 */ extern int cramfs_check (struct part_info *info); extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename); diff --git a/cmd/dtt.c b/cmd/dtt.c deleted file mode 100644 index dd427a3..0000000 --- a/cmd/dtt.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2001 - * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <command.h> - -#include <dtt.h> -#include <i2c.h> -#include <tmu.h> -#include <linux/bug.h> - -#if defined CONFIG_DTT_SENSORS -static unsigned long sensor_initialized; - -static void _initialize_dtt(void) -{ - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - - for (i = 0; i < sizeof(sensors); i++) { - if ((sensor_initialized & (1 << i)) == 0) { - if (dtt_init_one(sensors[i]) != 0) { - printf("DTT%d: Failed init!\n", i); - continue; - } - sensor_initialized |= (1 << i); - } - } -} - -void dtt_init(void) -{ - int old_bus; - - /* switch to correct I2C bus */ - old_bus = I2C_GET_BUS(); - I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); - - _initialize_dtt(); - - /* switch back to original I2C bus */ - I2C_SET_BUS(old_bus); -} -#endif - -int dtt_i2c(void) -{ -#if defined CONFIG_DTT_SENSORS - int i; - unsigned char sensors[] = CONFIG_DTT_SENSORS; - int old_bus; - - /* Force a compilation error, if there are more then 32 sensors */ - BUILD_BUG_ON(sizeof(sensors) > 32); - /* switch to correct I2C bus */ -#ifdef CONFIG_SYS_I2C - old_bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM); -#else - old_bus = I2C_GET_BUS(); - I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM); -#endif - - _initialize_dtt(); - - /* - * Loop through sensors, read - * temperature, and output it. - */ - for (i = 0; i < sizeof(sensors); i++) - printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i])); - - /* switch back to original I2C bus */ -#ifdef CONFIG_SYS_I2C - i2c_set_bus_num(old_bus); -#else - I2C_SET_BUS(old_bus); -#endif -#endif - - return 0; -} - -int dtt_tmu(void) -{ -#if defined CONFIG_TMU_CMD_DTT - int cur_temp; - - /* Sense and return latest thermal info */ - if (tmu_monitor(&cur_temp) == TMU_STATUS_INIT) { - puts("TMU is in unknown state, temperature is invalid\n"); - return -1; - } - printf("Current temperature: %u degrees Celsius\n", cur_temp); -#endif - return 0; -} - -int do_dtt(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - int err = 0; - - err |= dtt_i2c(); - err |= dtt_tmu(); - - return err; -} /* do_dtt() */ - -/***************************************************/ - -U_BOOT_CMD( - dtt, 1, 1, do_dtt, - "Read temperature from Digital Thermometer and Thermostat", - "" -); diff --git a/cmd/eeprom.c b/cmd/eeprom.c index e43566b..c61b396 100644 --- a/cmd/eeprom.c +++ b/cmd/eeprom.c @@ -265,10 +265,6 @@ __weak int eeprom_parse_layout_version(char *str) static unsigned char eeprom_buf[CONFIG_SYS_EEPROM_SIZE]; -#ifndef CONFIG_EEPROM_LAYOUT_HELP_STRING -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "<not defined>" -#endif - #endif enum eeprom_action { @@ -20,9 +20,7 @@ #define MAX_LEVEL 32 /* how deeply nested we will go */ #define SCRATCHPAD 1024 /* bytes of scratchpad memory */ -#ifndef CONFIG_CMD_FDT_MAX_DUMP -#define CONFIG_CMD_FDT_MAX_DUMP 64 -#endif +#define CMD_FDT_MAX_DUMP 64 /* * Global data (for the gd->bd) @@ -901,7 +899,7 @@ static void print_data(const void *data, int len) } if ((len %4) == 0) { - if (len > CONFIG_CMD_FDT_MAX_DUMP) + if (len > CMD_FDT_MAX_DUMP) printf("* 0x%p [0x%08x]", data, len); else { const __be32 *p; @@ -913,7 +911,7 @@ static void print_data(const void *data, int len) printf(">"); } } else { /* anything else... hexdump */ - if (len > CONFIG_CMD_FDT_MAX_DUMP) + if (len > CMD_FDT_MAX_DUMP) printf("* 0x%p [0x%08x]", data, len); else { const u8 *s; diff --git a/cmd/pcmcia.c b/cmd/pcmcia.c index 682d18f..044fb9e 100644 --- a/cmd/pcmcia.c +++ b/cmd/pcmcia.c @@ -83,7 +83,7 @@ U_BOOT_CMD( #undef CHECK_IDE_DEVICE -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CHECK_IDE_DEVICE #endif diff --git a/common/Kconfig b/common/Kconfig index 1879aef..5c39663 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -493,4 +493,16 @@ config BOARD_EARLY_INIT_F endmenu +menu "Security support" + +config HASH + bool # "Support hashing API (SHA1, SHA256, etc.)" + help + This provides a way to hash data in memory using various supported + algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h + and the algorithms it supports are defined in common/hash.c. See + also CMD_HASH for command-line access. + +endmenu + source "common/spl/Kconfig" diff --git a/common/Makefile b/common/Makefile index 14d0184..c7c8ea4 100644 --- a/common/Makefile +++ b/common/Makefile @@ -10,7 +10,7 @@ ifndef CONFIG_SPL_BUILD obj-y += init/ obj-y += main.o obj-y += exports.o -obj-y += hash.o +obj-$(CONFIG_HASH) += hash.o obj-$(CONFIG_HUSH_PARSER) += cli_hush.o obj-$(CONFIG_AUTOBOOT) += autoboot.o @@ -145,7 +145,6 @@ obj-y += dlmalloc.o ifdef CONFIG_SYS_MALLOC_F_LEN obj-y += malloc_simple.o endif -obj-$(CONFIG_CMD_IDE) += ide.o obj-y += image.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o diff --git a/common/board_r.c b/common/board_r.c index 28f32c3..fe7a70b 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -23,9 +23,7 @@ #include <dm.h> #include <environment.h> #include <fdtdec.h> -#if defined(CONFIG_CMD_IDE) #include <ide.h> -#endif #include <initcall.h> #include <init_helpers.h> #ifdef CONFIG_PS2KBD @@ -611,7 +609,7 @@ static int initr_post(void) } #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) +#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE) static int initr_pcmcia(void) { puts("PCMCIA:"); @@ -620,7 +618,7 @@ static int initr_pcmcia(void) } #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) static int initr_ide(void) { #ifdef CONFIG_IDE_8xx_PCCARD @@ -870,10 +868,10 @@ static init_fnc_t init_sequence_r[] = { #ifdef CONFIG_POST initr_post, #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) +#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE) initr_pcmcia, #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) initr_ide, #endif #ifdef CONFIG_LAST_STAGE_INIT diff --git a/common/hash.c b/common/hash.c index b645298..a0eded9 100644 --- a/common/hash.c +++ b/common/hash.c @@ -473,5 +473,5 @@ int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, return 0; } -#endif -#endif +#endif /* CONFIG_CMD_HASH || CONFIG_CMD_SHA1SUM || CONFIG_CMD_CRC32) */ +#endif /* !USE_HOSTCC */ diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 5ed3f19..eabb2d0 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -16,6 +16,14 @@ config SPL help If you want to build SPL as well as the normal image, say Y. +config SPL_BOARD_INIT + depends on SPL + bool "Call board-specific initialization in SPL" + help + If this option is enabled, U-Boot will call the function + spl_board_init() from board_init_r(). This function should be + provided by the board. + config SPL_RAW_IMAGE_SUPPORT bool "Support SPL loading and booting of RAW images" depends on SPL @@ -179,6 +187,7 @@ config SPL_MD5_SUPPORT config SPL_SHA1_SUPPORT bool "Support SHA1" depends on SPL_FIT + select SHA1 help Enable this to support SHA1 in FIT images within SPL. A SHA1 checksum is a 160-bit (20-byte) hash value used to check that the @@ -190,6 +199,7 @@ config SPL_SHA1_SUPPORT config SPL_SHA256_SUPPORT bool "Support SHA256" depends on SPL_FIT + select SHA256 help Enable this to support SHA256 in FIT images within SPL. A SHA256 checksum is a 256-bit (32-byte) hash value used to check that the @@ -221,6 +231,8 @@ config SPL_CRYPTO_SUPPORT config SPL_HASH_SUPPORT bool "Support hashing drivers" + select SHA1 + select SHA256 depends on SPL help Enable hashing drivers in SPL. These drivers can be used to diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index aae556f..4c42a96 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -11,24 +11,30 @@ #include <libfdt.h> #include <spl.h> +#define FDT_ERROR ((ulong)(-1)) + static ulong fdt_getprop_u32(const void *fdt, int node, const char *prop) { const u32 *cell; int len; cell = fdt_getprop(fdt, node, prop, &len); - if (len != sizeof(*cell)) - return -1U; + if (!cell || len != sizeof(*cell)) + return FDT_ERROR; + return fdt32_to_cpu(*cell); } -static int spl_fit_select_fdt(const void *fdt, int images, int *fdt_offsetp) +/* + * Iterate over all /configurations subnodes and call a platform specific + * function to find the matching configuration. + * Returns the node offset or a negative error number. + */ +static int spl_fit_find_config_node(const void *fdt) { - const char *name, *fdt_name; - int conf, node, fdt_node; - int len; + const char *name; + int conf, node, len; - *fdt_offsetp = 0; conf = fdt_path_offset(fdt, FIT_CONFS_PATH); if (conf < 0) { debug("%s: Cannot find /configurations node: %d\n", __func__, @@ -50,39 +56,69 @@ static int spl_fit_select_fdt(const void *fdt, int images, int *fdt_offsetp) continue; debug("Selecting config '%s'", name); - fdt_name = fdt_getprop(fdt, node, FIT_FDT_PROP, &len); - if (!fdt_name) { - debug("%s: Cannot find fdt name property: %d\n", - __func__, len); - return -EINVAL; - } - debug(", fdt '%s'\n", fdt_name); - fdt_node = fdt_subnode_offset(fdt, images, fdt_name); - if (fdt_node < 0) { - debug("%s: Cannot find fdt node '%s': %d\n", - __func__, fdt_name, fdt_node); - return -EINVAL; + return node; + } + + return -ENOENT; +} + +/** + * spl_fit_get_image_node(): By using the matching configuration subnode, + * retrieve the name of an image, specified by a property name and an index + * into that. + * @fit: Pointer to the FDT blob. + * @images: Offset of the /images subnode. + * @type: Name of the property within the configuration subnode. + * @index: Index into the list of strings in this property. + * + * Return: the node offset of the respective image node or a negative + * error number. + */ +static int spl_fit_get_image_node(const void *fit, int images, + const char *type, int index) +{ + const char *name, *str; + int node, conf_node; + int len, i; + + conf_node = spl_fit_find_config_node(fit); + if (conf_node < 0) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT + printf("No matching DT out of these options:\n"); + for (node = fdt_first_subnode(fit, conf_node); + node >= 0; + node = fdt_next_subnode(fit, node)) { + name = fdt_getprop(fit, node, "description", &len); + printf(" %s\n", name); } +#endif + return conf_node; + } - *fdt_offsetp = fdt_getprop_u32(fdt, fdt_node, "data-offset"); - len = fdt_getprop_u32(fdt, fdt_node, "data-size"); - debug("FIT: Selected '%s'\n", name); + name = fdt_getprop(fit, conf_node, type, &len); + if (!name) { + debug("cannot find property '%s': %d\n", type, len); + return -EINVAL; + } - return len; + str = name; + for (i = 0; i < index; i++) { + str = strchr(str, '\0') + 1; + if (!str || (str - name >= len)) { + debug("no string for index %d\n", index); + return -E2BIG; + } } -#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("No matching DT out of these options:\n"); - for (node = fdt_first_subnode(fdt, conf); - node >= 0; - node = fdt_next_subnode(fdt, node)) { - name = fdt_getprop(fdt, node, "description", &len); - printf(" %s\n", name); + debug("%s: '%s'\n", type, str); + node = fdt_subnode_offset(fit, images, str); + if (node < 0) { + debug("cannot find image node '%s': %d\n", str, node); + return -EINVAL; } -#endif - return -ENOENT; + return node; } static int get_aligned_image_offset(struct spl_load_info *info, int offset) @@ -123,19 +159,82 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size, return (data_size + info->bl_len - 1) / info->bl_len; } +/** + * spl_load_fit_image(): load the image described in a certain FIT node + * @info: points to information about the device to load data from + * @sector: the start sector of the FIT image on the device + * @fit: points to the flattened device tree blob describing the FIT + * image + * @base_offset: the beginning of the data area containing the actual + * image data, relative to the beginning of the FIT + * @node: offset of the DT node describing the image to load (relative + * to @fit) + * @image_info: will be filled with information about the loaded image + * If the FIT node does not contain a "load" (address) property, + * the image gets loaded to the address pointed to by the + * load_addr member in this struct. + * + * Return: 0 on success or a negative error number. + */ +static int spl_load_fit_image(struct spl_load_info *info, ulong sector, + void *fit, ulong base_offset, int node, + struct spl_image_info *image_info) +{ + ulong offset; + size_t length; + ulong load_addr, load_ptr; + void *src; + ulong overhead; + int nr_sectors; + int align_len = ARCH_DMA_MINALIGN - 1; + + offset = fdt_getprop_u32(fit, node, "data-offset"); + if (offset == FDT_ERROR) + return -ENOENT; + offset += base_offset; + length = fdt_getprop_u32(fit, node, "data-size"); + if (length == FDT_ERROR) + return -ENOENT; + load_addr = fdt_getprop_u32(fit, node, "load"); + if (load_addr == FDT_ERROR && image_info) + load_addr = image_info->load_addr; + load_ptr = (load_addr + align_len) & ~align_len; + + overhead = get_aligned_image_overhead(info, offset); + nr_sectors = get_aligned_image_size(info, length, offset); + + if (info->read(info, sector + get_aligned_image_offset(info, offset), + nr_sectors, (void*)load_ptr) != nr_sectors) + return -EIO; + debug("image: dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset, + (unsigned long)length); + + src = (void *)load_ptr + overhead; +#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS + board_fit_image_post_process(&src, &length); +#endif + + memcpy((void*)load_addr, src, length); + + if (image_info) { + image_info->load_addr = load_addr; + image_info->size = length; + image_info->entry_point = fdt_getprop_u32(fit, node, "entry"); + } + + return 0; +} + int spl_load_simple_fit(struct spl_image_info *spl_image, struct spl_load_info *info, ulong sector, void *fit) { int sectors; - ulong size, load; + ulong size; unsigned long count; - int node, images; - void *load_ptr; - int fdt_offset, fdt_len; - int data_offset, data_size; + struct spl_image_info image_info; + int node, images, ret; int base_offset, align_len = ARCH_DMA_MINALIGN - 1; - int src_sector; - void *dst, *src; + int index = 0; /* * Figure out where the external images start. This is the base for the @@ -168,90 +267,82 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, if (count == 0) return -EIO; - /* find the firmware image to load */ + /* find the node holding the images information */ images = fdt_path_offset(fit, FIT_IMAGES_PATH); if (images < 0) { debug("%s: Cannot find /images node: %d\n", __func__, images); return -1; } - node = fdt_first_subnode(fit, images); + + /* find the U-Boot image */ + node = spl_fit_get_image_node(fit, images, "firmware", 0); + if (node < 0) { + debug("could not find firmware image, trying loadables...\n"); + node = spl_fit_get_image_node(fit, images, "loadables", 0); + /* + * If we pick the U-Boot image from "loadables", start at + * the second image when later loading additional images. + */ + index = 1; + } if (node < 0) { - debug("%s: Cannot find first image node: %d\n", __func__, node); + debug("%s: Cannot find u-boot image node: %d\n", + __func__, node); return -1; } - /* Get its information and set up the spl_image structure */ - data_offset = fdt_getprop_u32(fit, node, "data-offset"); - data_size = fdt_getprop_u32(fit, node, "data-size"); - load = fdt_getprop_u32(fit, node, "load"); - debug("data_offset=%x, data_size=%x\n", data_offset, data_size); - spl_image->load_addr = load; - spl_image->entry_point = load; - spl_image->os = IH_OS_U_BOOT; - - /* - * Work out where to place the image. We read it so that the first - * byte will be at 'load'. This may mean we need to load it starting - * before then, since we can only read whole blocks. - */ - data_offset += base_offset; - sectors = get_aligned_image_size(info, data_size, data_offset); - load_ptr = (void *)load; - debug("U-Boot size %x, data %p\n", data_size, load_ptr); - dst = load_ptr; - - /* Read the image */ - src_sector = sector + get_aligned_image_offset(info, data_offset); - debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n", - dst, src_sector, sectors); - count = info->read(info, src_sector, sectors, dst); - if (count != sectors) - return -EIO; - debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset, - data_size); - src = dst + get_aligned_image_overhead(info, data_offset); + /* Load the image and set up the spl_image structure */ + ret = spl_load_fit_image(info, sector, fit, base_offset, node, + spl_image); + if (ret) + return ret; -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS - board_fit_image_post_process((void **)&src, (size_t *)&data_size); -#endif - - memcpy(dst, src, data_size); + spl_image->os = IH_OS_U_BOOT; /* Figure out which device tree the board wants to use */ - fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset); - if (fdt_len < 0) - return fdt_len; + node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0); + if (node < 0) { + debug("%s: cannot find FDT node\n", __func__); + return node; + } /* - * Read the device tree and place it after the image. There may be - * some extra data before it since we can only read entire blocks. - * And also align the destination address to ARCH_DMA_MINALIGN. + * Read the device tree and place it after the image. + * Align the destination address to ARCH_DMA_MINALIGN. */ - dst = (void *)((load + data_size + align_len) & ~align_len); - fdt_offset += base_offset; - sectors = get_aligned_image_size(info, fdt_len, fdt_offset); - src_sector = sector + get_aligned_image_offset(info, fdt_offset); - count = info->read(info, src_sector, sectors, dst); - debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n", - dst, src_sector, sectors); - if (count != sectors) - return -EIO; + image_info.load_addr = spl_image->load_addr + spl_image->size; + ret = spl_load_fit_image(info, sector, fit, base_offset, node, + &image_info); + if (ret < 0) + return ret; + + /* Now check if there are more images for us to load */ + for (; ; index++) { + node = spl_fit_get_image_node(fit, images, "loadables", index); + if (node < 0) + break; + + ret = spl_load_fit_image(info, sector, fit, base_offset, node, + &image_info); + if (ret < 0) + continue; + + /* + * If the "firmware" image did not provide an entry point, + * use the first valid entry point from the loadables. + */ + if (spl_image->entry_point == FDT_ERROR && + image_info.entry_point != FDT_ERROR) + spl_image->entry_point = image_info.entry_point; + } /* - * Copy the device tree so that it starts immediately after the image. - * After this we will have the U-Boot image and its device tree ready - * for us to start. + * If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's + * Makefile will set it to 0 and it will end up as the entry point + * here. What it actually means is: use the load address. */ - debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset, - fdt_len); - src = dst + get_aligned_image_overhead(info, fdt_offset); - dst = load_ptr + data_size; - -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS - board_fit_image_post_process((void **)&src, (size_t *)&fdt_len); -#endif - - memcpy(dst, src, fdt_len); + if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0) + spl_image->entry_point = spl_image->load_addr; return 0; } diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig index 88964b3..42f085a 100644 --- a/configs/C29XPCIE_NAND_defconfig +++ b/configs/C29XPCIE_NAND_defconfig @@ -20,6 +20,7 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig index 58e618b..99e2b33 100644 --- a/configs/C29XPCIE_NOR_SECBOOT_defconfig +++ b/configs/C29XPCIE_NOR_SECBOOT_defconfig @@ -10,6 +10,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig index d056503..26544f4 100644 --- a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig +++ b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig @@ -11,6 +11,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y diff --git a/configs/C29XPCIE_SPIFLASH_defconfig b/configs/C29XPCIE_SPIFLASH_defconfig index 5b595b8..41bf176 100644 --- a/configs/C29XPCIE_SPIFLASH_defconfig +++ b/configs/C29XPCIE_SPIFLASH_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y diff --git a/configs/C29XPCIE_defconfig b/configs/C29XPCIE_defconfig index 6288102..70b4478 100644 --- a/configs/C29XPCIE_defconfig +++ b/configs/C29XPCIE_defconfig @@ -8,6 +8,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y diff --git a/configs/CPCI2DP_defconfig b/configs/CPCI2DP_defconfig index 96a7643..735993b 100644 --- a/configs/CPCI2DP_defconfig +++ b/configs/CPCI2DP_defconfig @@ -5,6 +5,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/CPCI4052_defconfig b/configs/CPCI4052_defconfig index 4d818d7..550db77 100644 --- a/configs/CPCI4052_defconfig +++ b/configs/CPCI4052_defconfig @@ -9,7 +9,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/Cyrus_P5020_defconfig b/configs/Cyrus_P5020_defconfig index 443eec6..8e036d2 100644 --- a/configs/Cyrus_P5020_defconfig +++ b/configs/Cyrus_P5020_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_NETDEVICES=y diff --git a/configs/Cyrus_P5040_defconfig b/configs/Cyrus_P5040_defconfig index 7400f39..ee4da81 100644 --- a/configs/Cyrus_P5040_defconfig +++ b/configs/Cyrus_P5040_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_NETDEVICES=y diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig index e756401..903eef5 100644 --- a/configs/M52277EVB_defconfig +++ b/configs/M52277EVB_defconfig @@ -13,6 +13,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig index 4f9d97e..d657f86 100644 --- a/configs/M52277EVB_stmicro_defconfig +++ b/configs/M52277EVB_stmicro_defconfig @@ -12,6 +12,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 789dddb..09640de 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_TARGET_M5253DEMO=y CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/M5253EVBE_defconfig b/configs/M5253EVBE_defconfig index 5b3a2fe..79941a1 100644 --- a/configs/M5253EVBE_defconfig +++ b/configs/M5253EVBE_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0xFFE00000 CONFIG_TARGET_M5253EVBE=y CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set CONFIG_CMD_CACHE=y diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig index 3aed04e..221c707 100644 --- a/configs/M54455EVB_a66_defconfig +++ b/configs/M54455EVB_a66_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x04000000 CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=66666666" CONFIG_BOOTDELAY=1 +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y @@ -16,6 +17,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig index 6f624e6..557b87b 100644 --- a/configs/M54455EVB_defconfig +++ b/configs/M54455EVB_defconfig @@ -4,6 +4,7 @@ CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=33333333" CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y @@ -17,6 +18,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig index ecc610b..9ad0564 100644 --- a/configs/M54455EVB_i66_defconfig +++ b/configs/M54455EVB_i66_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=66666666" CONFIG_BOOTDELAY=1 +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y @@ -16,6 +17,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig index 93756b2..dc7af6c 100644 --- a/configs/M54455EVB_intel_defconfig +++ b/configs/M54455EVB_intel_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=33333333" CONFIG_BOOTDELAY=1 +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y @@ -16,6 +17,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig index f100276..eed2eab 100644 --- a/configs/M54455EVB_stm33_defconfig +++ b/configs/M54455EVB_stm33_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x4FE00000 CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_INPUT_CLKSRC=33333333" CONFIG_BOOTDELAY=1 +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y @@ -16,6 +17,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/MIP405T_defconfig b/configs/MIP405T_defconfig index 833c263..da3bbae 100644 --- a/configs/MIP405T_defconfig +++ b/configs/MIP405T_defconfig @@ -11,6 +11,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -20,6 +22,7 @@ CONFIG_CMD_BSP=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/MIP405_defconfig b/configs/MIP405_defconfig index 3da5152..4614167 100644 --- a/configs/MIP405_defconfig +++ b/configs/MIP405_defconfig @@ -11,6 +11,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -21,6 +23,7 @@ CONFIG_CMD_BSP=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/MPC8323ERDB_defconfig b/configs/MPC8323ERDB_defconfig index 6470850..54d8a3e 100644 --- a/configs/MPC8323ERDB_defconfig +++ b/configs/MPC8323ERDB_defconfig @@ -6,6 +6,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig index 4a7ff1b..9cec452 100644 --- a/configs/MPC8349ITX_LOWBOOT_defconfig +++ b/configs/MPC8349ITX_LOWBOOT_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX,SYS_TEXT_BASE=0xFE000000" CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="MPC8349E-mITX> " +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig index 7c67d8c..9145ada 100644 --- a/configs/MPC8349ITX_defconfig +++ b/configs/MPC8349ITX_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="MPC8349E-mITX> " +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig index 106a37d..6c3a044 100644 --- a/configs/MPC8536DS_36BIT_defconfig +++ b/configs/MPC8536DS_36BIT_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_VIDEO=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8536DS=y CONFIG_PHYS_64BIT=y CONFIG_OF_BOARD_SETUP=y @@ -15,6 +16,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_SYS_FSL_DDR2=y diff --git a/configs/MPC8536DS_SDCARD_defconfig b/configs/MPC8536DS_SDCARD_defconfig index 2e0b81c..761c165 100644 --- a/configs/MPC8536DS_SDCARD_defconfig +++ b/configs/MPC8536DS_SDCARD_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_VIDEO=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8536DS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -15,6 +16,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_SYS_FSL_DDR2=y diff --git a/configs/MPC8536DS_SPIFLASH_defconfig b/configs/MPC8536DS_SPIFLASH_defconfig index 92d7247..156c859 100644 --- a/configs/MPC8536DS_SPIFLASH_defconfig +++ b/configs/MPC8536DS_SPIFLASH_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_VIDEO=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8536DS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -15,6 +16,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_SYS_FSL_DDR2=y diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig index e835d6a..589ad9e 100644 --- a/configs/MPC8536DS_defconfig +++ b/configs/MPC8536DS_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_VIDEO=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8536DS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -14,6 +15,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_SYS_FSL_DDR2=y diff --git a/configs/MPC8540ADS_defconfig b/configs/MPC8540ADS_defconfig index ec570da..cef9c11 100644 --- a/configs/MPC8540ADS_defconfig +++ b/configs/MPC8540ADS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8540ADS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -7,6 +8,7 @@ CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/MPC8541CDS_defconfig b/configs/MPC8541CDS_defconfig index 9c685ff..8268388 100644 --- a/configs/MPC8541CDS_defconfig +++ b/configs/MPC8541CDS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8541CDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -8,6 +9,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/MPC8541CDS_legacy_defconfig b/configs/MPC8541CDS_legacy_defconfig index 36fd96f..09a9c0f 100644 --- a/configs/MPC8541CDS_legacy_defconfig +++ b/configs/MPC8541CDS_legacy_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8541CDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -9,6 +10,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/MPC8544DS_defconfig b/configs/MPC8544DS_defconfig index d8aa8e7..1798622 100644 --- a/configs/MPC8544DS_defconfig +++ b/configs/MPC8544DS_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_VIDEO=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8544DS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,6 +12,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index 65a339f..277043e 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8548CDS=y CONFIG_PHYS_64BIT=y CONFIG_OF_BOARD_SETUP=y @@ -9,6 +10,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_NETDEVICES=y diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index 3b194e0..a0c2f00 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8548CDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -8,6 +9,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_NETDEVICES=y diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index 0e0acbb..4ea1b9d 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8548CDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -9,6 +10,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_NETDEVICES=y diff --git a/configs/MPC8555CDS_defconfig b/configs/MPC8555CDS_defconfig index da6ff47..00c7a76 100644 --- a/configs/MPC8555CDS_defconfig +++ b/configs/MPC8555CDS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8555CDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -8,6 +9,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/MPC8555CDS_legacy_defconfig b/configs/MPC8555CDS_legacy_defconfig index b5ffd59..36da612 100644 --- a/configs/MPC8555CDS_legacy_defconfig +++ b/configs/MPC8555CDS_legacy_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8555CDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -9,6 +10,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/MPC8560ADS_defconfig b/configs/MPC8560ADS_defconfig index 68d0f54..2ceab0d 100644 --- a/configs/MPC8560ADS_defconfig +++ b/configs/MPC8560ADS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8560ADS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -7,6 +8,7 @@ CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8568MDS_defconfig b/configs/MPC8568MDS_defconfig index 701bff2..c41712f 100644 --- a/configs/MPC8568MDS_defconfig +++ b/configs/MPC8568MDS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8568MDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -9,6 +10,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/MPC8569MDS_ATM_defconfig b/configs/MPC8569MDS_ATM_defconfig index 4722dfe..cbbf4bc 100644 --- a/configs/MPC8569MDS_ATM_defconfig +++ b/configs/MPC8569MDS_ATM_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8569MDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,6 +12,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/MPC8569MDS_defconfig b/configs/MPC8569MDS_defconfig index c5a7991..45c4f54 100644 --- a/configs/MPC8569MDS_defconfig +++ b/configs/MPC8569MDS_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8569MDS=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -10,6 +11,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/MPC8572DS_36BIT_defconfig b/configs/MPC8572DS_36BIT_defconfig index a1640e3..521badc 100644 --- a/configs/MPC8572DS_36BIT_defconfig +++ b/configs/MPC8572DS_36BIT_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_SYS_FSL_DDR2=y # CONFIG_MMC is not set diff --git a/configs/MPC8572DS_defconfig b/configs/MPC8572DS_defconfig index 1cb830f..2821c8c 100644 --- a/configs/MPC8572DS_defconfig +++ b/configs/MPC8572DS_defconfig @@ -13,6 +13,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_SYS_FSL_DDR2=y # CONFIG_MMC is not set diff --git a/configs/MiniFAP_defconfig b/configs/MiniFAP_defconfig index 02ca577..b9cbafc 100644 --- a/configs/MiniFAP_defconfig +++ b/configs/MiniFAP_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -20,6 +21,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/P1020MBG-PC_36BIT_SDCARD_defconfig b/configs/P1020MBG-PC_36BIT_SDCARD_defconfig index e50bbb7..e297a0d 100644 --- a/configs/P1020MBG-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020MBG-PC_36BIT_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020MBG=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020MBG-PC_36BIT_defconfig b/configs/P1020MBG-PC_36BIT_defconfig index 45620a9..c8df31d 100644 --- a/configs/P1020MBG-PC_36BIT_defconfig +++ b/configs/P1020MBG-PC_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020MBG=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020MBG-PC_SDCARD_defconfig b/configs/P1020MBG-PC_SDCARD_defconfig index 6d8041f..a5bdec3 100644 --- a/configs/P1020MBG-PC_SDCARD_defconfig +++ b/configs/P1020MBG-PC_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020MBG=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -23,6 +24,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020MBG-PC_defconfig b/configs/P1020MBG-PC_defconfig index c0dd859..a9bae76 100644 --- a/configs/P1020MBG-PC_defconfig +++ b/configs/P1020MBG-PC_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020MBG=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -14,6 +15,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index 4b94619..56a0297 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -27,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index b5837ca..4d88226 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 59c05f8..324c6a0 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index 85fbc05..8e275e0 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -16,6 +17,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index c817ff3..71c0c2d 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index 1a7f5cd..9d99481 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index 13e63c7..79cba1a 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 19febe4..11f5961 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index 698d362..eb9d263 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 67dbcfa..e6373f4 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index 7b58c08..60f5ab3 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index ce1bfa2..30257b6 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020UTM-PC_36BIT_SDCARD_defconfig b/configs/P1020UTM-PC_36BIT_SDCARD_defconfig index b9bc52e..1d31e0f 100644 --- a/configs/P1020UTM-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020UTM-PC_36BIT_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020UTM=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020UTM-PC_36BIT_defconfig b/configs/P1020UTM-PC_36BIT_defconfig index f25d19b..031a7f2 100644 --- a/configs/P1020UTM-PC_36BIT_defconfig +++ b/configs/P1020UTM-PC_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020UTM=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020UTM-PC_SDCARD_defconfig b/configs/P1020UTM-PC_SDCARD_defconfig index b253552..d401a8c 100644 --- a/configs/P1020UTM-PC_SDCARD_defconfig +++ b/configs/P1020UTM-PC_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020UTM=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -23,6 +24,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1020UTM-PC_defconfig b/configs/P1020UTM-PC_defconfig index 2e36709..c6e12d6 100644 --- a/configs/P1020UTM-PC_defconfig +++ b/configs/P1020UTM-PC_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020UTM=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -14,6 +15,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig index 034db7d..f6bbf7d 100644 --- a/configs/P1021RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -27,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig index 7848b59..bbeeba0 100644 --- a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig index 7b187cd..ec326a0 100644 --- a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_defconfig b/configs/P1021RDB-PC_36BIT_defconfig index 82a2637..42ab8b9 100644 --- a/configs/P1021RDB-PC_36BIT_defconfig +++ b/configs/P1021RDB-PC_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -16,6 +17,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig index a31cc06..a9af746 100644 --- a/configs/P1021RDB-PC_NAND_defconfig +++ b/configs/P1021RDB-PC_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_SDCARD_defconfig b/configs/P1021RDB-PC_SDCARD_defconfig index b74bc65..ca77237 100644 --- a/configs/P1021RDB-PC_SDCARD_defconfig +++ b/configs/P1021RDB-PC_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_SPIFLASH_defconfig b/configs/P1021RDB-PC_SPIFLASH_defconfig index 48f66b2..86052a4 100644 --- a/configs/P1021RDB-PC_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1021RDB-PC_defconfig b/configs/P1021RDB-PC_defconfig index c7d109c..6aff0a0 100644 --- a/configs/P1021RDB-PC_defconfig +++ b/configs/P1021RDB-PC_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1021RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig index 77436fe..9c83a46 100644 --- a/configs/P1022DS_36BIT_NAND_defconfig +++ b/configs/P1022DS_36BIT_NAND_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_36BIT_SDCARD_defconfig b/configs/P1022DS_36BIT_SDCARD_defconfig index fee2a7b..e1f9a98 100644 --- a/configs/P1022DS_36BIT_SDCARD_defconfig +++ b/configs/P1022DS_36BIT_SDCARD_defconfig @@ -24,6 +24,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_36BIT_SPIFLASH_defconfig b/configs/P1022DS_36BIT_SPIFLASH_defconfig index 1601239..25521d8 100644 --- a/configs/P1022DS_36BIT_SPIFLASH_defconfig +++ b/configs/P1022DS_36BIT_SPIFLASH_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_36BIT_defconfig b/configs/P1022DS_36BIT_defconfig index c2bdc48..58335cb 100644 --- a/configs/P1022DS_36BIT_defconfig +++ b/configs/P1022DS_36BIT_defconfig @@ -15,6 +15,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig index f02457f..04bb7a1 100644 --- a/configs/P1022DS_NAND_defconfig +++ b/configs/P1022DS_NAND_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_SDCARD_defconfig b/configs/P1022DS_SDCARD_defconfig index a35f53b..af7b4db 100644 --- a/configs/P1022DS_SDCARD_defconfig +++ b/configs/P1022DS_SDCARD_defconfig @@ -23,6 +23,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_SPIFLASH_defconfig b/configs/P1022DS_SPIFLASH_defconfig index 30ac31e..22c3b6b 100644 --- a/configs/P1022DS_SPIFLASH_defconfig +++ b/configs/P1022DS_SPIFLASH_defconfig @@ -24,6 +24,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1022DS_defconfig b/configs/P1022DS_defconfig index 45a1f91..c0864a4 100644 --- a/configs/P1022DS_defconfig +++ b/configs/P1022DS_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1023RDB_defconfig b/configs/P1023RDB_defconfig index 5a45c7b..c53b7e0 100644 --- a/configs/P1023RDB_defconfig +++ b/configs/P1023RDB_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1023RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -8,10 +9,12 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=-1 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +# CONFIG_CMD_EEPROM is not set CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set diff --git a/configs/P1024RDB_36BIT_defconfig b/configs/P1024RDB_36BIT_defconfig index 80880d6..5b2773a 100644 --- a/configs/P1024RDB_36BIT_defconfig +++ b/configs/P1024RDB_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1024RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -16,6 +17,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1024RDB_NAND_defconfig b/configs/P1024RDB_NAND_defconfig index d832d3c..3a563f5 100644 --- a/configs/P1024RDB_NAND_defconfig +++ b/configs/P1024RDB_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1024RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1024RDB_SDCARD_defconfig b/configs/P1024RDB_SDCARD_defconfig index 9343fbb..69348a6 100644 --- a/configs/P1024RDB_SDCARD_defconfig +++ b/configs/P1024RDB_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1024RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1024RDB_SPIFLASH_defconfig b/configs/P1024RDB_SPIFLASH_defconfig index a500b09..ae12d7c 100644 --- a/configs/P1024RDB_SPIFLASH_defconfig +++ b/configs/P1024RDB_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1024RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1024RDB_defconfig b/configs/P1024RDB_defconfig index 5253acf..56bd118 100644 --- a/configs/P1024RDB_defconfig +++ b/configs/P1024RDB_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1024RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1025RDB_36BIT_defconfig b/configs/P1025RDB_36BIT_defconfig index 23c57c7..50ac75d 100644 --- a/configs/P1025RDB_36BIT_defconfig +++ b/configs/P1025RDB_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1025RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -16,6 +17,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig index b6d0dc6..221d4ae 100644 --- a/configs/P1025RDB_NAND_defconfig +++ b/configs/P1025RDB_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1025RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -27,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1025RDB_SDCARD_defconfig b/configs/P1025RDB_SDCARD_defconfig index 3165ca1..43fed35 100644 --- a/configs/P1025RDB_SDCARD_defconfig +++ b/configs/P1025RDB_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1025RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1025RDB_SPIFLASH_defconfig b/configs/P1025RDB_SPIFLASH_defconfig index a8901c1..672b7bb 100644 --- a/configs/P1025RDB_SPIFLASH_defconfig +++ b/configs/P1025RDB_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1025RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P1025RDB_defconfig b/configs/P1025RDB_defconfig index d8cb2cb..22bfb2e 100644 --- a/configs/P1025RDB_defconfig +++ b/configs/P1025RDB_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1025RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index e0fdd36..86a38b8 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -28,6 +29,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index 218a00a..f67d7cd 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index e7c491a..ee8227a 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index 4de5745..e40e371 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_PHYS_64BIT=y CONFIG_FIT=y @@ -16,6 +17,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index 332dc80..4b2651c 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -5,6 +5,7 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -26,6 +27,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index 0275b6c..f4cb697 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 400c813..5091022 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -25,6 +26,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index e4038c6..df1dbff 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/PATI_defconfig b/configs/PATI_defconfig index fbf3227..cd78de7 100644 --- a/configs/PATI_defconfig +++ b/configs/PATI_defconfig @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="pati=> " # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set @@ -20,6 +21,7 @@ CONFIG_SYS_PROMPT="pati=> " # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_BSP=y +CONFIG_CMD_IRQ=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/PIP405_defconfig b/configs/PIP405_defconfig index 4c2d558..07f1b54 100644 --- a/configs/PIP405_defconfig +++ b/configs/PIP405_defconfig @@ -11,8 +11,11 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y +CONFIG_CMD_FDC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/PLU405_defconfig b/configs/PLU405_defconfig index 5b67976..e30a720 100644 --- a/configs/PLU405_defconfig +++ b/configs/PLU405_defconfig @@ -9,6 +9,8 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/PMC405DE_defconfig b/configs/PMC405DE_defconfig index 0dd9ca7..cdc54ae 100644 --- a/configs/PMC405DE_defconfig +++ b/configs/PMC405DE_defconfig @@ -10,6 +10,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/PMC440_defconfig b/configs/PMC440_defconfig index 6b8854b..6ef6058 100644 --- a/configs/PMC440_defconfig +++ b/configs/PMC440_defconfig @@ -10,6 +10,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y @@ -20,6 +21,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_BSP=y CONFIG_CMD_DATE=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/T1040D4RDB_NAND_defconfig b/configs/T1040D4RDB_NAND_defconfig index bf239bd..c22bf9c 100644 --- a/configs/T1040D4RDB_NAND_defconfig +++ b/configs/T1040D4RDB_NAND_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040D4RDB_SDCARD_defconfig b/configs/T1040D4RDB_SDCARD_defconfig index e6a5b83..63010c5 100644 --- a/configs/T1040D4RDB_SDCARD_defconfig +++ b/configs/T1040D4RDB_SDCARD_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040D4RDB_SECURE_BOOT_defconfig b/configs/T1040D4RDB_SECURE_BOOT_defconfig index b0edffa..4758257 100644 --- a/configs/T1040D4RDB_SECURE_BOOT_defconfig +++ b/configs/T1040D4RDB_SECURE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_DM=y diff --git a/configs/T1040D4RDB_SPIFLASH_defconfig b/configs/T1040D4RDB_SPIFLASH_defconfig index e99809b..2a872b9 100644 --- a/configs/T1040D4RDB_SPIFLASH_defconfig +++ b/configs/T1040D4RDB_SPIFLASH_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040D4RDB_defconfig b/configs/T1040D4RDB_defconfig index 355d6ab..82d6140 100644 --- a/configs/T1040D4RDB_defconfig +++ b/configs/T1040D4RDB_defconfig @@ -18,6 +18,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040QDS_DDR4_defconfig b/configs/T1040QDS_DDR4_defconfig index 6ebde4d..063ae20 100644 --- a/configs/T1040QDS_DDR4_defconfig +++ b/configs/T1040QDS_DDR4_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y diff --git a/configs/T1040QDS_SECURE_BOOT_defconfig b/configs/T1040QDS_SECURE_BOOT_defconfig index e437cda..a75ee03 100644 --- a/configs/T1040QDS_SECURE_BOOT_defconfig +++ b/configs/T1040QDS_SECURE_BOOT_defconfig @@ -22,6 +22,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y diff --git a/configs/T1040QDS_defconfig b/configs/T1040QDS_defconfig index 7b96193..5d8cdf1 100644 --- a/configs/T1040QDS_defconfig +++ b/configs/T1040QDS_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig index a427cf1..b3e9c41 100644 --- a/configs/T1040RDB_NAND_defconfig +++ b/configs/T1040RDB_NAND_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig index 2d2585f..7b2187c 100644 --- a/configs/T1040RDB_SDCARD_defconfig +++ b/configs/T1040RDB_SDCARD_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig index c15f600..f16834b 100644 --- a/configs/T1040RDB_SECURE_BOOT_defconfig +++ b/configs/T1040RDB_SECURE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_DM=y diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig index f0c6000..9f5a8c4 100644 --- a/configs/T1040RDB_SPIFLASH_defconfig +++ b/configs/T1040RDB_SPIFLASH_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig index 1fca4a4..7d6ed1b 100644 --- a/configs/T1040RDB_defconfig +++ b/configs/T1040RDB_defconfig @@ -18,6 +18,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index d38b221..8e7b677 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index c039f95..fac743f 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SECURE_BOOT_defconfig b/configs/T2080RDB_SECURE_BOOT_defconfig index f7c3788..f829638 100644 --- a/configs/T2080RDB_SECURE_BOOT_defconfig +++ b/configs/T2080RDB_SECURE_BOOT_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index c00421f..ca7a38b 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig index 3fd4236..2829d06 100644 --- a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_FSL_CAAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 595fbbb..424eda1 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -17,6 +17,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +# CONFIG_CMD_IRQ is not set CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/TQM5200S_HIGHBOOT_defconfig b/configs/TQM5200S_HIGHBOOT_defconfig index d07596a..5e6f9c9 100644 --- a/configs/TQM5200S_HIGHBOOT_defconfig +++ b/configs/TQM5200S_HIGHBOOT_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -16,6 +17,7 @@ CONFIG_CMD_SNTP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/TQM5200S_defconfig b/configs/TQM5200S_defconfig index af32255..d0c352f 100644 --- a/configs/TQM5200S_defconfig +++ b/configs/TQM5200S_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -16,6 +17,7 @@ CONFIG_CMD_SNTP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/TQM5200_B_HIGHBOOT_defconfig b/configs/TQM5200_B_HIGHBOOT_defconfig index 37d6767..ed74408 100644 --- a/configs/TQM5200_B_HIGHBOOT_defconfig +++ b/configs/TQM5200_B_HIGHBOOT_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -20,6 +21,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/TQM5200_B_defconfig b/configs/TQM5200_B_defconfig index 5e0cf9e..cc9968c 100644 --- a/configs/TQM5200_B_defconfig +++ b/configs/TQM5200_B_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -20,6 +21,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/TQM5200_STK100_defconfig b/configs/TQM5200_STK100_defconfig index 7b4b030..35d4860 100644 --- a/configs/TQM5200_STK100_defconfig +++ b/configs/TQM5200_STK100_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -20,6 +21,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/TQM5200_defconfig b/configs/TQM5200_defconfig index 4792639..783c39a 100644 --- a/configs/TQM5200_defconfig +++ b/configs/TQM5200_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -19,6 +20,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/TQM823L_LCD_defconfig b/configs/TQM823L_LCD_defconfig index 89f2ecb..ccb68b2 100644 --- a/configs/TQM823L_LCD_defconfig +++ b/configs/TQM823L_LCD_defconfig @@ -7,12 +7,14 @@ CONFIG_BOOTDELAY=5 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/TQM823L_defconfig b/configs/TQM823L_defconfig index e2681ad..c588948 100644 --- a/configs/TQM823L_defconfig +++ b/configs/TQM823L_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM823M_defconfig b/configs/TQM823M_defconfig index 829942e..0490828 100644 --- a/configs/TQM823M_defconfig +++ b/configs/TQM823M_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM834x_defconfig b/configs/TQM834x_defconfig index b03f79e..ef73ed4 100644 --- a/configs/TQM834x_defconfig +++ b/configs/TQM834x_defconfig @@ -6,6 +6,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -13,6 +14,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/TQM850L_defconfig b/configs/TQM850L_defconfig index 2c24844..0e42d8c 100644 --- a/configs/TQM850L_defconfig +++ b/configs/TQM850L_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM850M_defconfig b/configs/TQM850M_defconfig index a6882aa..a464fe5 100644 --- a/configs/TQM850M_defconfig +++ b/configs/TQM850M_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM855L_defconfig b/configs/TQM855L_defconfig index 8be81ae..aa37001 100644 --- a/configs/TQM855L_defconfig +++ b/configs/TQM855L_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM855M_defconfig b/configs/TQM855M_defconfig index ea0ad4d..faab826 100644 --- a/configs/TQM855M_defconfig +++ b/configs/TQM855M_defconfig @@ -5,11 +5,14 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM860L_defconfig b/configs/TQM860L_defconfig index e65b01f..b18cf31 100644 --- a/configs/TQM860L_defconfig +++ b/configs/TQM860L_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM860M_defconfig b/configs/TQM860M_defconfig index 5c69085..fe2fe6d 100644 --- a/configs/TQM860M_defconfig +++ b/configs/TQM860M_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM862L_defconfig b/configs/TQM862L_defconfig index f3d077c..6f5f772 100644 --- a/configs/TQM862L_defconfig +++ b/configs/TQM862L_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM862M_defconfig b/configs/TQM862M_defconfig index 3069dcb..4430776 100644 --- a/configs/TQM862M_defconfig +++ b/configs/TQM862M_defconfig @@ -5,11 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM866M_defconfig b/configs/TQM866M_defconfig index c329777..d892290 100644 --- a/configs/TQM866M_defconfig +++ b/configs/TQM866M_defconfig @@ -5,10 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_LED_STATUS=y diff --git a/configs/TQM885D_defconfig b/configs/TQM885D_defconfig index 4ecdf6d..48421e3 100644 --- a/configs/TQM885D_defconfig +++ b/configs/TQM885D_defconfig @@ -5,7 +5,9 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/TTTech_defconfig b/configs/TTTech_defconfig index e0493a1..9d26e94 100644 --- a/configs/TTTech_defconfig +++ b/configs/TTTech_defconfig @@ -7,12 +7,14 @@ CONFIG_BOOTDELAY=5 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/TWR-P1025_defconfig b/configs/TWR-P1025_defconfig index 2efc09d..e210643 100644 --- a/configs/TWR-P1025_defconfig +++ b/configs/TWR-P1025_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1_TWR=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -9,11 +10,13 @@ CONFIG_SYS_EXTRA_OPTIONS="TWR_P1025" CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig index da538af..2fc8d86 100644 --- a/configs/UCP1020_SPIFLASH_defconfig +++ b/configs/UCP1020_SPIFLASH_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_DATE=y CONFIG_CMD_CRAMFS=y CONFIG_CMD_EXT2=y diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index c7ec446..63f1a9d 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_DATE=y CONFIG_CMD_CRAMFS=y CONFIG_CMD_EXT2=y diff --git a/configs/VOM405_defconfig b/configs/VOM405_defconfig index 23d33a6..c19c11d 100644 --- a/configs/VOM405_defconfig +++ b/configs/VOM405_defconfig @@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/a3m071_defconfig b/configs/a3m071_defconfig index 8d636e0..a461b80 100644 --- a/configs/a3m071_defconfig +++ b/configs/a3m071_defconfig @@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y diff --git a/configs/a4m072_defconfig b/configs/a4m072_defconfig index 0054d4c..4fbffb6 100644 --- a/configs/a4m072_defconfig +++ b/configs/a4m072_defconfig @@ -7,6 +7,7 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="asdfg" +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/a4m2k_defconfig b/configs/a4m2k_defconfig index c3ee199..3100da6 100644 --- a/configs/a4m2k_defconfig +++ b/configs/a4m2k_defconfig @@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y diff --git a/configs/ac14xx_defconfig b/configs/ac14xx_defconfig index 930ec8a..6855331 100644 --- a/configs/ac14xx_defconfig +++ b/configs/ac14xx_defconfig @@ -9,6 +9,7 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/acadia_defconfig b/configs/acadia_defconfig index a30e34d..652d01e 100644 --- a/configs/acadia_defconfig +++ b/configs/acadia_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/adp-ae3xx_defconfig b/configs/adp-ae3xx_defconfig new file mode 100644 index 0000000..95df275 --- /dev/null +++ b/configs/adp-ae3xx_defconfig @@ -0,0 +1,25 @@ +CONFIG_NDS32=y +CONFIG_TARGET_ADP_AE3XX=y +CONFIG_DEFAULT_DEVICE_TREE="ae3xx" +CONFIG_FIT=y +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="NDS32 # " +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_DATE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_MMC=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_BAUDRATE=38400 +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_MTD=y +CONFIG_CFI_FLASH=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_TIMER=y +CONFIG_AE3XX_TIMER=y diff --git a/configs/adp-ag101p_defconfig b/configs/adp-ag101p_defconfig index 48d08cc..afcfa18 100644 --- a/configs/adp-ag101p_defconfig +++ b/configs/adp-ag101p_defconfig @@ -1,9 +1,12 @@ CONFIG_NDS32=y CONFIG_TARGET_ADP_AG101P=y +CONFIG_DEFAULT_DEVICE_TREE="ag101p" +CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_SYS_PROMPT="NDS32 # " CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y @@ -12,4 +15,9 @@ CONFIG_CMD_FAT=y CONFIG_MMC=y CONFIG_MTD_NOR_FLASH=y CONFIG_BAUDRATE=38400 +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_TIMER=y +CONFIG_AG101P_TIMER=y diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index dfbb812..590673b 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -29,6 +29,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index c3237f5..962bb65 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -48,4 +48,3 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments" CONFIG_G_DNL_VENDOR_NUM=0x0451 CONFIG_G_DNL_PRODUCT_NUM=0xd022 CONFIG_RSA=y -CONFIG_SPL_OF_LIBFDT=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 000099e..55ed8f3 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_MUSB_NEW_SUPPORT=y CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig index 994540d..bae1dfe 100644 --- a/configs/am335x_sl50_defconfig +++ b/configs/am335x_sl50_defconfig @@ -26,6 +26,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_AUTOBOOT is not set # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index 81fec1e..2a0987e 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -22,6 +22,7 @@ CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index fa203f8..6a30706 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -16,6 +16,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 65d5d83..84766e8 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -13,6 +13,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 50cca20..a98a97f 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -20,6 +20,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig index 2550aee..40055f0 100644 --- a/configs/ap121_defconfig +++ b/configs/ap121_defconfig @@ -50,3 +50,4 @@ CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_AR933X_UART=y CONFIG_DM_SPI=y CONFIG_ATH79_SPI=y +CONFIG_LZMA=y diff --git a/configs/ap143_defconfig b/configs/ap143_defconfig index 0753221..05f1699 100644 --- a/configs/ap143_defconfig +++ b/configs/ap143_defconfig @@ -46,3 +46,4 @@ CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y CONFIG_ATH79_SPI=y +CONFIG_LZMA=y diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig index fd30665..ebefd12 100644 --- a/configs/ap325rxa_defconfig +++ b/configs/ap325rxa_defconfig @@ -11,6 +11,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 90829b4..f586773 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -7,6 +7,7 @@ CONFIG_TARGET_APALIS_IMX6=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set diff --git a/configs/apalis_imx6_nospl_com_defconfig b/configs/apalis_imx6_nospl_com_defconfig index ef9ca60..42abbbd 100644 --- a/configs/apalis_imx6_nospl_com_defconfig +++ b/configs/apalis_imx6_nospl_com_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX6=y CONFIG_TARGET_APALIS_IMX6=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=1024" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set diff --git a/configs/apalis_imx6_nospl_it_defconfig b/configs/apalis_imx6_nospl_it_defconfig index f48bd17..18f0d02 100644 --- a/configs/apalis_imx6_nospl_it_defconfig +++ b/configs/apalis_imx6_nospl_it_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX6=y CONFIG_TARGET_APALIS_IMX6=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=2048" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set diff --git a/configs/apf27_defconfig b/configs/apf27_defconfig index 71839f5..7474fdd 100644 --- a/configs/apf27_defconfig +++ b/configs/apf27_defconfig @@ -11,6 +11,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="BIOS> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/arches_defconfig b/configs/arches_defconfig index 4477bab..e0621f0 100644 --- a/configs/arches_defconfig +++ b/configs/arches_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/aria_defconfig b/configs/aria_defconfig index 0f1432f..0613dd1 100644 --- a/configs/aria_defconfig +++ b/configs/aria_defconfig @@ -9,6 +9,7 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index d5e8430..888bb33 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -5,9 +5,11 @@ CONFIG_BOOTDELAY=1 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="URMEL > " CONFIG_CMD_I2C=y +CONFIG_CMD_FPGA_LOADMK=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig index 1e85f0a..17db763 100644 --- a/configs/atngw100_defconfig +++ b/configs/atngw100_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_SPI=y CONFIG_CMD_DHCP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MMC=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/atngw100mkii_defconfig b/configs/atngw100mkii_defconfig index 2fa5b69..887c5fb 100644 --- a/configs/atngw100mkii_defconfig +++ b/configs/atngw100mkii_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MMC=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/atstk1002_defconfig b/configs/atstk1002_defconfig index 49182e3..0fa7969 100644 --- a/configs/atstk1002_defconfig +++ b/configs/atstk1002_defconfig @@ -17,5 +17,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MMC=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/bamboo_defconfig b/configs/bamboo_defconfig index 44d9198..41ce230 100644 --- a/configs/bamboo_defconfig +++ b/configs/bamboo_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/bcm911360_entphn-ns_defconfig b/configs/bcm911360_entphn-ns_defconfig index 4f04590..61336d3 100644 --- a/configs/bcm911360_entphn-ns_defconfig +++ b/configs/bcm911360_entphn-ns_defconfig @@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/bcm911360_entphn_defconfig b/configs/bcm911360_entphn_defconfig index 2469792..cbef3d8 100644 --- a/configs/bcm911360_entphn_defconfig +++ b/configs/bcm911360_entphn_defconfig @@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/bcm911360k_defconfig b/configs/bcm911360k_defconfig index 83afce4..b124206 100644 --- a/configs/bcm911360k_defconfig +++ b/configs/bcm911360k_defconfig @@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/bcm958300k-ns_defconfig b/configs/bcm958300k-ns_defconfig index b21fea4..f271fa0 100644 --- a/configs/bcm958300k-ns_defconfig +++ b/configs/bcm958300k-ns_defconfig @@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/bcm958300k_defconfig b/configs/bcm958300k_defconfig index 83afce4..b124206 100644 --- a/configs/bcm958300k_defconfig +++ b/configs/bcm958300k_defconfig @@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/bcm958305k_defconfig b/configs/bcm958305k_defconfig index 83afce4..b124206 100644 --- a/configs/bcm958305k_defconfig +++ b/configs/bcm958305k_defconfig @@ -18,4 +18,6 @@ CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/bcm958622hr_defconfig b/configs/bcm958622hr_defconfig index a639336..c2713c6 100644 --- a/configs/bcm958622hr_defconfig +++ b/configs/bcm958622hr_defconfig @@ -13,7 +13,10 @@ CONFIG_CMD_ASKENV=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y +CONFIG_CMD_HASH=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y +CONFIG_SHA1=y +CONFIG_SHA256=y CONFIG_OF_LIBFDT=y diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig index 17c6008..7811273 100644 --- a/configs/birdland_bav335a_defconfig +++ b/configs/birdland_bav335a_defconfig @@ -26,6 +26,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig index 225271c..1765ec4 100644 --- a/configs/birdland_bav335b_defconfig +++ b/configs/birdland_bav335b_defconfig @@ -26,6 +26,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig index c15070e..c5b1e9c 100644 --- a/configs/bk4r1_defconfig +++ b/configs/bk4r1_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/bubinga_defconfig b/configs/bubinga_defconfig index e2e7ce0..69cf9e0 100644 --- a/configs/bubinga_defconfig +++ b/configs/bubinga_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/cam5200_defconfig b/configs/cam5200_defconfig index 46a24f5..d8a419c 100644 --- a/configs/cam5200_defconfig +++ b/configs/cam5200_defconfig @@ -13,6 +13,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_BSP=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/cam5200_niosflash_defconfig b/configs/cam5200_niosflash_defconfig index 6b9877f..d7577a4 100644 --- a/configs/cam5200_niosflash_defconfig +++ b/configs/cam5200_niosflash_defconfig @@ -13,6 +13,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_BSP=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/canmb_defconfig b/configs/canmb_defconfig index 1f6f18d..87eb205 100644 --- a/configs/canmb_defconfig +++ b/configs/canmb_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_CANMB=y CONFIG_BOOTDELAY=5 CONFIG_CMD_ASKENV=y diff --git a/configs/canyonlands_defconfig b/configs/canyonlands_defconfig index e76736a..2b59fd3 100644 --- a/configs/canyonlands_defconfig +++ b/configs/canyonlands_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/charon_defconfig b/configs/charon_defconfig index 8a14290..2e4ad65 100644 --- a/configs/charon_defconfig +++ b/configs/charon_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -19,6 +20,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig index ed419a3..ef76033 100644 --- a/configs/cl-som-am57x_defconfig +++ b/configs/cl-som-am57x_defconfig @@ -9,6 +9,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/cm5200_defconfig b/configs/cm5200_defconfig index d3369f4..860d23e 100644 --- a/configs/cm5200_defconfig +++ b/configs/cm5200_defconfig @@ -15,6 +15,7 @@ CONFIG_CMD_SNTP=y CONFIG_CMD_BSP=y CONFIG_CMD_DATE=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 5a371c7..fb2f9fa 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -23,6 +23,9 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 4d0d03e..dbb1c3b 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -23,6 +23,9 @@ CONFIG_SYS_PROMPT="CM-T335 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index c1cb2c0..9b81596 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -10,6 +10,9 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T3517 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v1, v2, v3" # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index 868d175..29405f8 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -12,6 +12,9 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T3x # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v1, v2, v3" # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 6ef980a..bec96ae 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -26,6 +26,9 @@ CONFIG_SYS_PROMPT="CM-T43 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index 0679456..eef2f89 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -16,6 +16,9 @@ CONFIG_SYS_PROMPT="CM-T54 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_EEPROM_LAYOUT=y +CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 47e8198..6c10576 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -7,6 +7,7 @@ CONFIG_TARGET_COLIBRI_IMX6=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set diff --git a/configs/colibri_imx6_nospl_defconfig b/configs/colibri_imx6_nospl_defconfig index 52e0d50..bd2ac24 100644 --- a/configs/colibri_imx6_nospl_defconfig +++ b/configs/colibri_imx6_nospl_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX6=y CONFIG_TARGET_COLIBRI_IMX6=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx6/colibri_imx6.cfg,MX6DL,DDR_MB=256" CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index b69ce65..cc9c4ee 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -21,6 +21,7 @@ CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig index 6c46ac8..cff3f45 100644 --- a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig @@ -16,6 +16,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_TPM=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y diff --git a/configs/controlcenterd_36BIT_SDCARD_defconfig b/configs/controlcenterd_36BIT_SDCARD_defconfig index 0c1181f..f155089 100644 --- a/configs/controlcenterd_36BIT_SDCARD_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_defconfig @@ -16,6 +16,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y @@ -24,6 +25,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_TPM=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y diff --git a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig index bc2e7b4..614cdb6 100644 --- a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01" CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP" CONFIG_BOOTDELAY=-2 @@ -9,13 +10,17 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_HASH is not set CONFIG_CMD_TPM=y +# CONFIG_CMD_IRQ is not set CONFIG_DOS_PARTITION=y CONFIG_DM=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_TPM_AUTH_SESSIONS=y CONFIG_TPM=y +CONFIG_SHA1=y diff --git a/configs/controlcenterd_TRAILBLAZER_defconfig b/configs/controlcenterd_TRAILBLAZER_defconfig index 7ec77a1..da657f1 100644 --- a/configs/controlcenterd_TRAILBLAZER_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01" CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH" CONFIG_BOOTDELAY=-2 @@ -9,13 +10,17 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_HASH is not set CONFIG_CMD_TPM=y +# CONFIG_CMD_IRQ is not set CONFIG_DOS_PARTITION=y CONFIG_DM=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_TPM_AUTH_SESSIONS=y CONFIG_TPM=y +CONFIG_SHA1=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index e1c4f0c..037f338 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -11,6 +11,7 @@ CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_ELF is not set diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index 90cf139..8b51073 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_PART=y CONFIG_CMD_SF=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index 67a791d..a0b5c75 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="d2v2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig index d873101..bb92c43 100644 --- a/configs/da850_am18xxevm_defconfig +++ b/configs/da850_am18xxevm_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index f50a949..1120182 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_CMD_BOOTZ=y diff --git a/configs/dbau1000_defconfig b/configs/dbau1000_defconfig index 703f1a5..bb65369 100644 --- a/configs/dbau1000_defconfig +++ b/configs/dbau1000_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/dbau1100_defconfig b/configs/dbau1100_defconfig index 3fb0967..98b0d40 100644 --- a/configs/dbau1100_defconfig +++ b/configs/dbau1100_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/dbau1500_defconfig b/configs/dbau1500_defconfig index ad095cf..cdf5477 100644 --- a/configs/dbau1500_defconfig +++ b/configs/dbau1500_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/devconcenter_defconfig b/configs/devconcenter_defconfig index 1c16ed2..b75807d 100644 --- a/configs/devconcenter_defconfig +++ b/configs/devconcenter_defconfig @@ -14,6 +14,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 074be13..06874c9 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -9,6 +9,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y @@ -21,6 +22,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_DM_GPIO=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 7edcb08..617228f 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y diff --git a/configs/digsy_mtc_RAMBOOT_defconfig b/configs/digsy_mtc_RAMBOOT_defconfig index 86b2b0d..cda75d6 100644 --- a/configs/digsy_mtc_RAMBOOT_defconfig +++ b/configs/digsy_mtc_RAMBOOT_defconfig @@ -13,6 +13,7 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/digsy_mtc_defconfig b/configs/digsy_mtc_defconfig index 85b7f85..da9cec8 100644 --- a/configs/digsy_mtc_defconfig +++ b/configs/digsy_mtc_defconfig @@ -11,6 +11,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR=" " CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/digsy_mtc_rev5_RAMBOOT_defconfig b/configs/digsy_mtc_rev5_RAMBOOT_defconfig index 7ec8650..1bba630 100644 --- a/configs/digsy_mtc_rev5_RAMBOOT_defconfig +++ b/configs/digsy_mtc_rev5_RAMBOOT_defconfig @@ -13,6 +13,7 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/digsy_mtc_rev5_defconfig b/configs/digsy_mtc_rev5_defconfig index b4b8533..3491fdd 100644 --- a/configs/digsy_mtc_rev5_defconfig +++ b/configs/digsy_mtc_rev5_defconfig @@ -13,6 +13,7 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/dlvision-10g_defconfig b/configs/dlvision-10g_defconfig index c3574e1..f92bf1e 100644 --- a/configs/dlvision-10g_defconfig +++ b/configs/dlvision-10g_defconfig @@ -3,6 +3,7 @@ CONFIG_IDENT_STRING=" dlvision-10g 0.06" CONFIG_4xx=y CONFIG_TARGET_DLVISION_10G=y CONFIG_FIT=y +# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 @@ -21,6 +22,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/dlvision_defconfig b/configs/dlvision_defconfig index f9f07ee..32d8708 100644 --- a/configs/dlvision_defconfig +++ b/configs/dlvision_defconfig @@ -3,6 +3,7 @@ CONFIG_IDENT_STRING=" dlvision 0.02" CONFIG_4xx=y CONFIG_TARGET_DLVISION=y CONFIG_FIT=y +# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 @@ -18,6 +19,7 @@ CONFIG_LOOPW=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 87ef896..abe6a63 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -7,6 +7,7 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -16,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index 14eee48..a704588 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index e30ba0d..8f3ffcf 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_USB=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index e9f67ae..46ac567 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_DS109=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index b637483..4e17bb9 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SPL_OF_TRANSLATE=y diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig index 61ac94b..d567b89 100644 --- a/configs/eco5pk_defconfig +++ b/configs/eco5pk_defconfig @@ -9,6 +9,7 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ECO5-PK # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/edb9315a_defconfig b/configs/edb9315a_defconfig index e7b4810..bb67881 100644 --- a/configs/edb9315a_defconfig +++ b/configs/edb9315a_defconfig @@ -15,6 +15,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y # CONFIG_DOS_PARTITION is not set CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index 51c9ba5..d67b548 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -9,9 +9,11 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="EDMiniV2> " +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index d5e0888..197052d 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y diff --git a/configs/fo300_defconfig b/configs/fo300_defconfig index 0041815..24470f3 100644 --- a/configs/fo300_defconfig +++ b/configs/fo300_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -22,6 +23,7 @@ CONFIG_CMD_BMP=y CONFIG_CMD_BSP=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y diff --git a/configs/glacier_defconfig b/configs/glacier_defconfig index b47bfb5..6886298 100644 --- a/configs/glacier_defconfig +++ b/configs/glacier_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/glacier_ramboot_defconfig b/configs/glacier_ramboot_defconfig index 7e69570..ccb77bc 100644 --- a/configs/glacier_ramboot_defconfig +++ b/configs/glacier_ramboot_defconfig @@ -13,6 +13,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index 046435a..4dfb895 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -7,6 +7,7 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="GoFlexHome> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -17,6 +18,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/grasshopper_defconfig b/configs/grasshopper_defconfig index 2944d73..024231d 100644 --- a/configs/grasshopper_defconfig +++ b/configs/grasshopper_defconfig @@ -14,4 +14,5 @@ CONFIG_CMD_ASKENV=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index f2c22bf..570819d 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y @@ -18,6 +19,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set @@ -25,4 +27,5 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_LZMA=y CONFIG_OF_LIBFDT=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index dfabb6b..0d0d142 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -4,12 +4,15 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_GW_VENTANA=y +CONFIG_CMD_EECONFIG=y +CONFIG_CMD_GSC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_VIDEO=y CONFIG_SPL_STACK_R_ADDR=0x18000000 +CONFIG_CMD_HDMIDETECT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -19,6 +22,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index f95aa44..8f66189 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -4,12 +4,15 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_GW_VENTANA=y +CONFIG_CMD_EECONFIG=y +CONFIG_CMD_GSC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_VIDEO=y CONFIG_SPL_STACK_R_ADDR=0x18000000 +CONFIG_CMD_HDMIDETECT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -19,6 +22,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 169570d..5545171 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -4,6 +4,8 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_GW_VENTANA=y +CONFIG_CMD_EECONFIG=y +CONFIG_CMD_GSC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y @@ -11,6 +13,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_VIDEO=y CONFIG_SPL_STACK_R_ADDR=0x18000000 +CONFIG_CMD_HDMIDETECT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -20,6 +23,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y diff --git a/configs/h2200_defconfig b/configs/h2200_defconfig index b85ed59..9d3698c 100644 --- a/configs/h2200_defconfig +++ b/configs/h2200_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_H2200=y CONFIG_FIT=y +# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/haleakala_defconfig b/configs/haleakala_defconfig index 9ff43da..6833e477 100644 --- a/configs/haleakala_defconfig +++ b/configs/haleakala_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/hrcon_defconfig b/configs/hrcon_defconfig index afb0154..aea0676 100644 --- a/configs/hrcon_defconfig +++ b/configs/hrcon_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" hrcon 0.01" CONFIG_MPC83xx=y CONFIG_TARGET_HRCON=y +CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -15,6 +16,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FPGAD=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/hrcon_dh_defconfig b/configs/hrcon_dh_defconfig index ce8b797..8e911d4 100644 --- a/configs/hrcon_dh_defconfig +++ b/configs/hrcon_dh_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" hrcon dh 0.01" CONFIG_MPC83xx=y CONFIG_TARGET_HRCON=y +CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -14,6 +15,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FPGAD=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index f454277..cc9011d 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -8,6 +8,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ib62x0 => " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y @@ -17,6 +18,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set @@ -24,4 +26,5 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_LZMA=y CONFIG_OF_LIBFDT=y diff --git a/configs/icon_defconfig b/configs/icon_defconfig index b47b15d..0a28a95 100644 --- a/configs/icon_defconfig +++ b/configs/icon_defconfig @@ -13,6 +13,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index 7e0b444..3e48380 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -13,6 +13,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set @@ -20,4 +21,5 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_LZMA=y CONFIG_OF_LIBFDT=y diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 165e2eb..2a8c239 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -13,6 +13,7 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n" CONFIG_AUTOBOOT_DELAY_STR="ids" +CONFIG_CMD_ENV_FLAGS=y CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set @@ -21,6 +22,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/imx31_phycore_defconfig b/configs/imx31_phycore_defconfig index ed3e7c5..224bedb 100644 --- a/configs/imx31_phycore_defconfig +++ b/configs/imx31_phycore_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_IMX31_PHYCORE=y CONFIG_BOOTDELAY=3 CONFIG_SYS_PROMPT="uboot> " +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y diff --git a/configs/imx31_phycore_eet_defconfig b/configs/imx31_phycore_eet_defconfig index 7de703e..c881b8f 100644 --- a/configs/imx31_phycore_eet_defconfig +++ b/configs/imx31_phycore_eet_defconfig @@ -4,6 +4,7 @@ CONFIG_VIDEO=y CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index bee0490..8daf433 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/inka4x0_defconfig b/configs/inka4x0_defconfig index 174719c..c263cf6 100644 --- a/configs/inka4x0_defconfig +++ b/configs/inka4x0_defconfig @@ -3,12 +3,12 @@ CONFIG_MPC5xxx=y CONFIG_TARGET_INKA4X0=y CONFIG_BOOTDELAY=1 CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y diff --git a/configs/intip_defconfig b/configs/intip_defconfig index da4f3f4..d6c85c8 100644 --- a/configs/intip_defconfig +++ b/configs/intip_defconfig @@ -16,6 +16,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/io64_defconfig b/configs/io64_defconfig index 9026ac8..c586f00 100644 --- a/configs/io64_defconfig +++ b/configs/io64_defconfig @@ -17,6 +17,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/io_defconfig b/configs/io_defconfig index 5dca2b1..d1b5a03 100644 --- a/configs/io_defconfig +++ b/configs/io_defconfig @@ -3,6 +3,7 @@ CONFIG_IDENT_STRING=" io 0.06" CONFIG_4xx=y CONFIG_TARGET_IO=y CONFIG_FIT=y +# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 @@ -20,6 +21,7 @@ CONFIG_LOOPW=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/iocon_defconfig b/configs/iocon_defconfig index c74df94..c34d98b 100644 --- a/configs/iocon_defconfig +++ b/configs/iocon_defconfig @@ -3,6 +3,7 @@ CONFIG_IDENT_STRING=" iocon 0.06" CONFIG_4xx=y CONFIG_TARGET_IOCON=y CONFIG_FIT=y +# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -16,12 +17,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_LOOPW=y +CONFIG_CMD_FPGAD=y CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DIAG=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/ipam390_defconfig b/configs/ipam390_defconfig index 72ceb5e..705236e 100644 --- a/configs/ipam390_defconfig +++ b/configs/ipam390_defconfig @@ -11,6 +11,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/ipek01_defconfig b/configs/ipek01_defconfig index 690bc0f..f86170d 100644 --- a/configs/ipek01_defconfig +++ b/configs/ipek01_defconfig @@ -7,12 +7,14 @@ CONFIG_BOOTDELAY=5 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_LOOPW=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_BMP=y CONFIG_CMD_FAT=y +CONFIG_CMD_IRQ=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y diff --git a/configs/katmai_defconfig b/configs/katmai_defconfig index 406bdcd..43b0c41 100644 --- a/configs/katmai_defconfig +++ b/configs/katmai_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_KATMAI=y CONFIG_CMD_CHIP_CONFIG=y +CONFIG_CMD_ECCTEST=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -10,6 +11,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/kilauea_defconfig b/configs/kilauea_defconfig index 0ed41c3..5eaa7e3 100644 --- a/configs/kilauea_defconfig +++ b/configs/kilauea_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index 49080a8..df7dac8 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index 678558e..4b9cdb7 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 2c5ed60..7995277 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig index e9f4414..c923aa6 100644 --- a/configs/kmcoge4_defconfig +++ b/configs/kmcoge4_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_KMP204X=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,12 +16,16 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +CONFIG_CMD_JFFS2=y +# CONFIG_CMD_IRQ is not set CONFIG_CMD_UBI=y CONFIG_DOS_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index 3a351ef..0a22f8d 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_KM8360=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 9f5f667..af0df7e 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 01d940a..6cbecf6 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_KM8360=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig index a8bd490..e4ff6d7 100644 --- a/configs/kmlion1_defconfig +++ b/configs/kmlion1_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_KMP204X=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,12 +16,16 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +CONFIG_CMD_JFFS2=y +# CONFIG_CMD_IRQ is not set CONFIG_CMD_UBI=y CONFIG_DOS_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index 0b4f10a..eb70cd6 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index f14e37a..6874e02 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_TUXX1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig index a35aee9..ed90f9d 100644 --- a/configs/kmsugp1_defconfig +++ b/configs/kmsugp1_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index ce4b97e..ecd297d 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_TUXX1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig index bb932c0..c5edce8 100644 --- a/configs/kmsuv31_defconfig +++ b/configs/kmsuv31_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index 746af8c..9e20c02 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_SUVD3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index 0f5fca7..2c6e00e 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_TUXX1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig index 8365055..a0a7238 100644 --- a/configs/kmvect1_defconfig +++ b/configs/kmvect1_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_SUVD3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index a6995ab..2124273 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -13,6 +13,7 @@ CONFIG_BOOTDELAY=10 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index a680706..617c522 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -9,6 +9,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index fd88958..0106e9a 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -8,6 +8,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 26c9210..99df6e0 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index 4478080..f08e7bf 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index a5ebe0e..70839e6 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -9,6 +9,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index efdb0f1..ed79c97 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -8,6 +8,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index f642fc7..5ce37fd 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 124bf24..1d55003 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 398c6b5..75fe55d 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y diff --git a/configs/luan_defconfig b/configs/luan_defconfig index 1ee1e6f..16b3a9c 100644 --- a/configs/luan_defconfig +++ b/configs/luan_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/lwmon5_defconfig b/configs/lwmon5_defconfig index 5fc5916..09365d4 100644 --- a/configs/lwmon5_defconfig +++ b/configs/lwmon5_defconfig @@ -13,6 +13,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/m53evk_defconfig b/configs/m53evk_defconfig index b0379b8..a7bf297 100644 --- a/configs/m53evk_defconfig +++ b/configs/m53evk_defconfig @@ -15,6 +15,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y diff --git a/configs/makalu_defconfig b/configs/makalu_defconfig index 47198fc..b462ee9 100644 --- a/configs/makalu_defconfig +++ b/configs/makalu_defconfig @@ -10,6 +10,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index a7f14bd..a342bec 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -6,6 +6,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="malta # " # CONFIG_AUTOBOOT is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index 9b04e0b..ac56046 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -7,6 +7,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="maltael # " # CONFIG_AUTOBOOT is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 237b3ab..e4e21d0 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -5,6 +5,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="malta # " # CONFIG_AUTOBOOT is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index fe5e00c..0b9f665 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -6,6 +6,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="maltael # " # CONFIG_AUTOBOOT is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 7744fcb..acc43ad 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y # CONFIG_CMD_BMODE is not set CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg,MX6QDL" CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 1118caa..61c436e 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y # CONFIG_CMD_BMODE is not set CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg,MX6QDL" CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig index 349df80..09dbc78 100644 --- a/configs/mcx_defconfig +++ b/configs/mcx_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y diff --git a/configs/mecp5123_defconfig b/configs/mecp5123_defconfig index db52077..3937fe8 100644 --- a/configs/mecp5123_defconfig +++ b/configs/mecp5123_defconfig @@ -11,6 +11,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/mgcoge3ne_defconfig b/configs/mgcoge3ne_defconfig index 22c8b31..58d6656 100644 --- a/configs/mgcoge3ne_defconfig +++ b/configs/mgcoge3ne_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC8260=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_KM82XX=y CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig index 341c56c..2add882 100644 --- a/configs/mgcoge3un_defconfig +++ b/configs/mgcoge3un_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/mgcoge_defconfig b/configs/mgcoge_defconfig index 875c17e..c4f39b3 100644 --- a/configs/mgcoge_defconfig +++ b/configs/mgcoge_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC8260=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_KM82XX=y CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 131d6f5..4a13700 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -14,6 +14,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y @@ -27,6 +28,7 @@ CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig index 5040ea5..c4006bc 100644 --- a/configs/motionpro_defconfig +++ b/configs/motionpro_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_MOTIONPRO=y CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y @@ -8,11 +9,13 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_BEDBUG=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y diff --git a/configs/mpc5121ads_defconfig b/configs/mpc5121ads_defconfig index a6bfc71..5bb7807 100644 --- a/configs/mpc5121ads_defconfig +++ b/configs/mpc5121ads_defconfig @@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=5 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -13,6 +14,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/mpc5121ads_rev2_defconfig b/configs/mpc5121ads_rev2_defconfig index 61c366a..e28fa19 100644 --- a/configs/mpc5121ads_rev2_defconfig +++ b/configs/mpc5121ads_rev2_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=5 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -14,6 +15,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig index b31962a..30e5269 100644 --- a/configs/ms7720se_defconfig +++ b/configs/ms7720se_defconfig @@ -11,6 +11,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/ms7722se_defconfig b/configs/ms7722se_defconfig index cb50b46..92f3158 100644 --- a/configs/ms7722se_defconfig +++ b/configs/ms7722se_defconfig @@ -20,5 +20,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set +CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig index 4840868..c4a6f20 100644 --- a/configs/mt_ventoux_defconfig +++ b/configs/mt_ventoux_defconfig @@ -12,10 +12,12 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="mt_ventoux => " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y +CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/munices_defconfig b/configs/munices_defconfig index ddd5c43..0e2b188 100644 --- a/configs/munices_defconfig +++ b/configs/munices_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_MUNICES=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig index d7e5404..3f57c88 100644 --- a/configs/mx51evk_defconfig +++ b/configs/mx51evk_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y +CONFIG_CMD_FUSE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index c34beb7..b180f54 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y # CONFIG_CMD_BMODE is not set +CONFIG_CMD_HDMIDETECT=y CONFIG_VIDEO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index c4301e1..a542799 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 8e9c13a..a57cc97 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nas220> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -17,6 +18,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y diff --git a/configs/neo_defconfig b/configs/neo_defconfig index fbb2da4..6ca5b4e 100644 --- a/configs/neo_defconfig +++ b/configs/neo_defconfig @@ -3,6 +3,7 @@ CONFIG_IDENT_STRING=" neo 0.02" CONFIG_4xx=y CONFIG_TARGET_NEO=y CONFIG_FIT=y +# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 @@ -18,6 +19,7 @@ CONFIG_LOOPW=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index b43ad16..ab8eb95 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="2big2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 3c3fc99..66db644 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index 4605be3..04abc94 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 0a00e05..5f79e6f 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index 2103a1c..a81ad0b 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -9,6 +9,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index 9b16bf4..5744ede 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 83bbf8e..dca89ec 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 69cf637..a19d093 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index 2e9ee2e..edf4b63 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index f3dd324..0f75320 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index 5a825d6..45a5acb 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_NITROGEN6X=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512" CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index a970eb5..49b963c 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y +CONFIG_CMD_HDMIDETECT=y CONFIG_VIDEO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y @@ -21,6 +22,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index 3269b85..ae39818 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -7,6 +7,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nsa310s => " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y @@ -16,6 +17,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set @@ -23,4 +25,5 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_LZMA=y CONFIG_OF_LIBFDT=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 1b61d1d..227f1d1 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -21,6 +21,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set # CONFIG_SPL_PARTITION_UUIDS is not set diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 50450c9..aa70358 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -18,6 +18,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="OMAP Logic # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_EEPROM is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_USB is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 0629f96..ff5e06d 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -13,9 +13,11 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5 CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_EEPROM is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index 84d3f89..1471872 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -16,6 +17,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index 57cbb3a..b62852a 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -16,6 +17,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index 4bc2dce..d57b696 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -16,6 +17,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig index 213f036..d6271b8 100644 --- a/configs/ot1200_defconfig +++ b/configs/ot1200_defconfig @@ -7,6 +7,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/pcm030_LOWBOOT_defconfig b/configs/pcm030_LOWBOOT_defconfig index 2933326..0ef8750 100644 --- a/configs/pcm030_LOWBOOT_defconfig +++ b/configs/pcm030_LOWBOOT_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y diff --git a/configs/pcm030_defconfig b/configs/pcm030_defconfig index ff9f4e9..3869991 100644 --- a/configs/pcm030_defconfig +++ b/configs/pcm030_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_PROMPT="uboot> " # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index 4392c6e..f278075 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -28,6 +28,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index 72a2631..5fa60b7 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -28,6 +28,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig index 1dbc0a8..1e72e91 100644 --- a/configs/pcm052_defconfig +++ b/configs/pcm052_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index c8219b5..c55537c 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_CMD_HDMIDETECT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index 4c46f1e..6d4d8ad 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -29,6 +29,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 92bda60..593e24a 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y CONFIG_SPL=y diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 92441b3..7cf2722 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -17,6 +17,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig index 7235922..954908e 100644 --- a/configs/pm9g45_defconfig +++ b/configs/pm9g45_defconfig @@ -16,6 +16,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index 7699e0c..57ebc06 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig index 77aeb92..a0faba5 100644 --- a/configs/portl2_defconfig +++ b/configs/portl2_defconfig @@ -12,12 +12,14 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index 7f9ba87..f4640b9 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_QEMU_PPCE500=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -15,6 +16,7 @@ CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 02e6af1..36d0185 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -32,6 +32,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 73ee7b6..b648326 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_PART=y CONFIG_CMD_SF=y diff --git a/configs/qemu-x86_efi_payload32_defconfig b/configs/qemu-x86_efi_payload32_defconfig index 4f6803d..e092dbd 100644 --- a/configs/qemu-x86_efi_payload32_defconfig +++ b/configs/qemu-x86_efi_payload32_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_PART=y CONFIG_CMD_SF=y diff --git a/configs/qemu-x86_efi_payload64_defconfig b/configs/qemu-x86_efi_payload64_defconfig index b354ba1..f8f6295 100644 --- a/configs/qemu-x86_efi_payload64_defconfig +++ b/configs/qemu-x86_efi_payload64_defconfig @@ -11,6 +11,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_PART=y CONFIG_CMD_SF=y diff --git a/configs/qemu_mips64_defconfig b/configs/qemu_mips64_defconfig index e748f02..6835cf1 100644 --- a/configs/qemu_mips64_defconfig +++ b/configs/qemu_mips64_defconfig @@ -4,6 +4,7 @@ CONFIG_CPU_MIPS64_R1=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="qemu-mips64 # " +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set @@ -14,3 +15,4 @@ CONFIG_CMD_FAT=y # CONFIG_ISO_PARTITION is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y +CONFIG_LZMA=y diff --git a/configs/qemu_mips64el_defconfig b/configs/qemu_mips64el_defconfig index b2d2a0b..60bd616 100644 --- a/configs/qemu_mips64el_defconfig +++ b/configs/qemu_mips64el_defconfig @@ -5,6 +5,7 @@ CONFIG_CPU_MIPS64_R1=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="qemu-mips64el # " +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set @@ -15,3 +16,4 @@ CONFIG_CMD_FAT=y # CONFIG_ISO_PARTITION is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y +CONFIG_LZMA=y diff --git a/configs/qemu_mips_defconfig b/configs/qemu_mips_defconfig index 3ef02a4..c6f08b4 100644 --- a/configs/qemu_mips_defconfig +++ b/configs/qemu_mips_defconfig @@ -3,6 +3,7 @@ CONFIG_TARGET_QEMU_MIPS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="qemu-mips # " +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set @@ -12,3 +13,4 @@ CONFIG_CMD_FAT=y # CONFIG_ISO_PARTITION is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y +CONFIG_LZMA=y diff --git a/configs/qemu_mipsel_defconfig b/configs/qemu_mipsel_defconfig index 0841595..b8c2069 100644 --- a/configs/qemu_mipsel_defconfig +++ b/configs/qemu_mipsel_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_LITTLE_ENDIAN=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="qemu-mipsel # " +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set @@ -13,3 +14,4 @@ CONFIG_CMD_FAT=y # CONFIG_ISO_PARTITION is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y +CONFIG_LZMA=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 3bd3d21..ba68b50 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -1,6 +1,7 @@ CONFIG_SH=y CONFIG_TARGET_R2DPLUS=y CONFIG_BOOTDELAY=-1 +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/r7780mp_defconfig b/configs/r7780mp_defconfig index 999470c..2a37db8 100644 --- a/configs/r7780mp_defconfig +++ b/configs/r7780mp_defconfig @@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/rainier_defconfig b/configs/rainier_defconfig index be2beb7..7c62f69 100644 --- a/configs/rainier_defconfig +++ b/configs/rainier_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/rainier_ramboot_defconfig b/configs/rainier_ramboot_defconfig index 0c0559a..621e414 100644 --- a/configs/rainier_ramboot_defconfig +++ b/configs/rainier_ramboot_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/redwood_defconfig b/configs/redwood_defconfig index 425b2fe..78b004f 100644 --- a/configs/redwood_defconfig +++ b/configs/redwood_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 5417057..f39d03e 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -22,12 +22,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_ENV_CALLBACK=y +CONFIG_CMD_ENV_FLAGS=y CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y +CONFIG_CMD_IDE=y CONFIG_CMD_GPT=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y @@ -42,6 +45,7 @@ CONFIG_CMD_CDP=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_ETHSW=y CONFIG_CMD_BMP=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y diff --git a/configs/sandbox_noblk_defconfig b/configs/sandbox_noblk_defconfig index 6c6e659..519e91f 100644 --- a/configs/sandbox_noblk_defconfig +++ b/configs/sandbox_noblk_defconfig @@ -22,12 +22,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_ENV_CALLBACK=y +CONFIG_CMD_ENV_FLAGS=y CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y +CONFIG_CMD_IDE=y CONFIG_CMD_GPT=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 3061e5a..761cfb6 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -21,6 +21,7 @@ CONFIG_CONSOLE_RECORD=y CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 CONFIG_SILENT_CONSOLE=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y @@ -29,12 +30,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_ENV_CALLBACK=y +CONFIG_CMD_ENV_FLAGS=y CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y +CONFIG_CMD_IDE=y CONFIG_CMD_GPT=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y diff --git a/configs/sbc8548_PCI_33_PCIE_defconfig b/configs/sbc8548_PCI_33_PCIE_defconfig index 08679f0..6348f7d 100644 --- a/configs/sbc8548_PCI_33_PCIE_defconfig +++ b/configs/sbc8548_PCI_33_PCIE_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SBC8548=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -12,6 +13,8 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/sbc8548_PCI_33_defconfig b/configs/sbc8548_PCI_33_defconfig index 650535a..acb3092 100644 --- a/configs/sbc8548_PCI_33_defconfig +++ b/configs/sbc8548_PCI_33_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SBC8548=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -12,6 +13,8 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/sbc8548_PCI_66_PCIE_defconfig b/configs/sbc8548_PCI_66_PCIE_defconfig index cadb269..195d472 100644 --- a/configs/sbc8548_PCI_66_PCIE_defconfig +++ b/configs/sbc8548_PCI_66_PCIE_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SBC8548=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -12,6 +13,8 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/sbc8548_PCI_66_defconfig b/configs/sbc8548_PCI_66_defconfig index c89a0a0..c107213 100644 --- a/configs/sbc8548_PCI_66_defconfig +++ b/configs/sbc8548_PCI_66_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SBC8548=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -12,6 +13,8 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/sbc8548_defconfig b/configs/sbc8548_defconfig index 3ffbe5b..185825e 100644 --- a/configs/sbc8548_defconfig +++ b/configs/sbc8548_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SBC8548=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,6 +12,8 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y +# CONFIG_CMD_HASH is not set +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/sequoia_defconfig b/configs/sequoia_defconfig index b21e369..a016379 100644 --- a/configs/sequoia_defconfig +++ b/configs/sequoia_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/sequoia_ramboot_defconfig b/configs/sequoia_ramboot_defconfig index ffdf6c4..b6802f2 100644 --- a/configs/sequoia_ramboot_defconfig +++ b/configs/sequoia_ramboot_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/sh7763rdp_defconfig b/configs/sh7763rdp_defconfig index ec0275e..0286166 100644 --- a/configs/sh7763rdp_defconfig +++ b/configs/sh7763rdp_defconfig @@ -21,5 +21,6 @@ CONFIG_VERSION_VARIABLE=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set +CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index fa99d51..ac7217d 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y @@ -19,10 +20,12 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_LZMA=y CONFIG_OF_LIBFDT=y diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index fb9bae4..18186e8 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index 07114ec..5def6d5 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_VIDEO=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SOCRATES=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -19,7 +20,9 @@ CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/strider_con_defconfig b/configs/strider_con_defconfig index 51a5085..d293d39 100644 --- a/configs/strider_con_defconfig +++ b/configs/strider_con_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" strider con 0.01" CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -17,6 +18,7 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FPGAD=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/strider_con_dp_defconfig b/configs/strider_con_dp_defconfig index 9524c9c..e0040e9 100644 --- a/configs/strider_con_dp_defconfig +++ b/configs/strider_con_dp_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" strider con dp 0.01" CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -17,6 +18,7 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FPGAD=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/strider_cpu_defconfig b/configs/strider_cpu_defconfig index 090d7e8..7d372ff 100644 --- a/configs/strider_cpu_defconfig +++ b/configs/strider_cpu_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" strider cpu 0.01" CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -17,6 +18,7 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FPGAD=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/strider_cpu_dp_defconfig b/configs/strider_cpu_dp_defconfig index ec715f1..5d304b3 100644 --- a/configs/strider_cpu_dp_defconfig +++ b/configs/strider_cpu_dp_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_IDENT_STRING=" strider cpu dp 0.01" CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -17,6 +18,7 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FPGAD=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig index f476a23..e5e100a 100644 --- a/configs/suvd3_defconfig +++ b/configs/suvd3_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_SUVD3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/sycamore_defconfig b/configs/sycamore_defconfig index 5f56a51..d346343 100644 --- a/configs/sycamore_defconfig +++ b/configs/sycamore_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/t3corp_defconfig b/configs/t3corp_defconfig index 21c4c89..3b37eb9 100644 --- a/configs/t3corp_defconfig +++ b/configs/t3corp_defconfig @@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_T3CORP=y CONFIG_CMD_CHIP_CONFIG=y +CONFIG_CMD_ECCTEST=y CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 @@ -12,6 +13,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index e462283..da042ae 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -4,6 +4,7 @@ CONFIG_ARCH_MX6=y CONFIG_TARGET_TBS2910=y CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_PRE_CON_BUF_ADDR=0x7c000000 diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig index 3c7e6ff..65314df 100644 --- a/configs/tplink_wdr4300_defconfig +++ b/configs/tplink_wdr4300_defconfig @@ -45,3 +45,4 @@ CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_LZMA=y diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig index 6e4e6f7..cd31cf3 100644 --- a/configs/tqma6dl_mba6_mmc_defconfig +++ b/configs/tqma6dl_mba6_mmc_defconfig @@ -11,6 +11,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig index 9cd5481..dee295e 100644 --- a/configs/tqma6dl_mba6_spi_defconfig +++ b/configs/tqma6dl_mba6_spi_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index 5b4c506..6e8e842 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -10,6 +10,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index c842af7..3ec25c8 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -11,6 +11,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index cff6e10..eb609e1 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -11,6 +11,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index 740d01f..f824018 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -12,6 +12,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig index e24912e..4dc6b9e 100644 --- a/configs/tqma6s_wru4_mmc_defconfig +++ b/configs/tqma6s_wru4_mmc_defconfig @@ -16,6 +16,7 @@ CONFIG_AUTOBOOT_ENCRYPTION=y CONFIG_AUTOBOOT_STOP_STR_SHA256="36a9e7f1c95b82ffb99743e0c5c4ce95d83c9a430aac59f84ef3cbfab6145068" CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index 14a8eb4..65b2b5a 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -9,6 +9,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="OMAP3 Tricorder # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index 290e979..a5d1bab 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -9,6 +9,7 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index fa998f8..c3e5a9e 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_TUXX1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index a6093bc..515656d 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC83xx=y +CONFIG_CMD_IMMAP=y CONFIG_TARGET_TUXX1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -11,10 +12,12 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/twister_defconfig b/configs/twister_defconfig index 62d7d17..124506a 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="twister => " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig index 4325617..a71a757 100644 --- a/configs/usbarmory_defconfig +++ b/configs/usbarmory_defconfig @@ -8,6 +8,7 @@ CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y +CONFIG_CMD_FUSE=y # CONFIG_CMD_SETEXPR is not set CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/v38b_defconfig b/configs/v38b_defconfig index 18dc039..c75e547 100644 --- a/configs/v38b_defconfig +++ b/configs/v38b_defconfig @@ -3,13 +3,16 @@ CONFIG_MPC5xxx=y CONFIG_TARGET_V38B=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_CMD_IDE=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y +CONFIG_CMD_IRQ=y CONFIG_MAC_PARTITION=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y diff --git a/configs/vct_platinum_defconfig b/configs/vct_platinum_defconfig index 259b48f..f8b9d7e 100644 --- a/configs/vct_platinum_defconfig +++ b/configs/vct_platinum_defconfig @@ -4,6 +4,7 @@ CONFIG_VCT_PLATINUM=y CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_PROMPT="$ " +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/vct_platinum_onenand_defconfig b/configs/vct_platinum_onenand_defconfig index 6d2d14f..5d4cccc 100644 --- a/configs/vct_platinum_onenand_defconfig +++ b/configs/vct_platinum_onenand_defconfig @@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_USB=y @@ -14,6 +15,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index 0e4964b..5a5edd8 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_SYS_NS16550=y diff --git a/configs/vct_platinumavc_defconfig b/configs/vct_platinumavc_defconfig index aff3d2b..5efe223 100644 --- a/configs/vct_platinumavc_defconfig +++ b/configs/vct_platinumavc_defconfig @@ -4,6 +4,7 @@ CONFIG_VCT_PLATINUMAVC=y CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_PROMPT="VCT# " +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set diff --git a/configs/vct_platinumavc_onenand_defconfig b/configs/vct_platinumavc_onenand_defconfig index d690e19..1f0a3f8 100644 --- a/configs/vct_platinumavc_onenand_defconfig +++ b/configs/vct_platinumavc_onenand_defconfig @@ -6,12 +6,14 @@ CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_SYS_NS16550=y diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index 5b443cf..9e2fcbf 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_SYS_NS16550=y diff --git a/configs/vct_premium_defconfig b/configs/vct_premium_defconfig index 3996d9d..24f776b 100644 --- a/configs/vct_premium_defconfig +++ b/configs/vct_premium_defconfig @@ -4,6 +4,7 @@ CONFIG_VCT_PREMIUM=y CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_PROMPT="$ " +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/vct_premium_onenand_defconfig b/configs/vct_premium_onenand_defconfig index 6bbdc3b..ac9cf36 100644 --- a/configs/vct_premium_onenand_defconfig +++ b/configs/vct_premium_onenand_defconfig @@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=5 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_USB=y @@ -14,6 +15,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index 8eca0a5..6e649ec 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y # CONFIG_ISO_PARTITION is not set CONFIG_SYS_NS16550=y diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index 9198f65..4719309 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -10,6 +10,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index ba4e596..f1dc19a 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -10,6 +10,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/walnut_defconfig b/configs/walnut_defconfig index 5f56a51..d346343 100644 --- a/configs/walnut_defconfig +++ b/configs/walnut_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index f4c9b6b..b4b3283 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y +CONFIG_CMD_HDMIDETECT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" # CONFIG_CONSOLE_MUX is not set diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig index fdc2b2a..22172c5 100644 --- a/configs/woodburn_sd_defconfig +++ b/configs/woodburn_sd_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 CONFIG_HUSH_PARSER=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index ebcae43..06b31ba 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -4,14 +4,17 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_CMD_HD44760=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y diff --git a/configs/wtk_defconfig b/configs/wtk_defconfig index ad9100e..2b81535 100644 --- a/configs/wtk_defconfig +++ b/configs/wtk_defconfig @@ -7,12 +7,14 @@ CONFIG_BOOTDELAY=5 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_SNTP=y CONFIG_CMD_BMP=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y +CONFIG_CMD_JFFS2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y # CONFIG_MMC is not set diff --git a/configs/x600_defconfig b/configs/x600_defconfig index 3aaba16..2e5d5f1 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -20,6 +20,7 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y +CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/xilinx-ppc405-generic_defconfig b/configs/xilinx-ppc405-generic_defconfig index 6aa049c..1f90e3d 100644 --- a/configs/xilinx-ppc405-generic_defconfig +++ b/configs/xilinx-ppc405-generic_defconfig @@ -18,6 +18,7 @@ CONFIG_LOOPW=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_OF_EMBED=y # CONFIG_MMC is not set diff --git a/configs/xilinx-ppc440-generic_defconfig b/configs/xilinx-ppc440-generic_defconfig index c9a1e2b..f1f7234 100644 --- a/configs/xilinx-ppc440-generic_defconfig +++ b/configs/xilinx-ppc440-generic_defconfig @@ -17,6 +17,7 @@ CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y +CONFIG_CMD_JFFS2=y CONFIG_CMD_DIAG=y CONFIG_OF_EMBED=y CONFIG_NETCONSOLE=y diff --git a/configs/xilinx_zynqmp_zcu102_defconfig b/configs/xilinx_zynqmp_zcu102_defconfig index 0796e81..bfb5c04 100644 --- a/configs/xilinx_zynqmp_zcu102_defconfig +++ b/configs/xilinx_zynqmp_zcu102_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 3711ac8..4ba1ac6 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set diff --git a/configs/xpedite1000_defconfig b/configs/xpedite1000_defconfig index 9dd082b..b89e247 100644 --- a/configs/xpedite1000_defconfig +++ b/configs/xpedite1000_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -14,6 +15,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig index 909efb1..2788db0 100644 --- a/configs/xpedite517x_defconfig +++ b/configs/xpedite517x_defconfig @@ -8,6 +8,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -15,6 +16,9 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +CONFIG_CMD_JFFS2=y +CONFIG_CMD_IRQ=y +CONFIG_DS4510=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/xpedite520x_defconfig b/configs/xpedite520x_defconfig index e1fdfeb..904f7b9 100644 --- a/configs/xpedite520x_defconfig +++ b/configs/xpedite520x_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_XPEDITE520X=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -8,6 +9,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -15,6 +17,9 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set +CONFIG_CMD_JFFS2=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/xpedite537x_defconfig b/configs/xpedite537x_defconfig index 41dee5d..45fe128 100644 --- a/configs/xpedite537x_defconfig +++ b/configs/xpedite537x_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_XPEDITE537X=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -8,6 +9,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -15,7 +17,11 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set +CONFIG_CMD_JFFS2=y +# CONFIG_CMD_IRQ is not set CONFIG_SYS_FSL_DDR2=y +CONFIG_DS4510=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/xpedite550x_defconfig b/configs/xpedite550x_defconfig index 785eeef..cad0d23 100644 --- a/configs/xpedite550x_defconfig +++ b/configs/xpedite550x_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y +# CONFIG_CMD_ERRATA is not set CONFIG_TARGET_XPEDITE550X=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -16,6 +17,9 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y +# CONFIG_CMD_HASH is not set +CONFIG_CMD_JFFS2=y +# CONFIG_CMD_IRQ is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/yellowstone_defconfig b/configs/yellowstone_defconfig index 1eb3eef..d15ee20 100644 --- a/configs/yellowstone_defconfig +++ b/configs/yellowstone_defconfig @@ -10,6 +10,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/yosemite_defconfig b/configs/yosemite_defconfig index 237a7ca..935854c 100644 --- a/configs/yosemite_defconfig +++ b/configs/yosemite_defconfig @@ -10,6 +10,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y diff --git a/configs/yucca_defconfig b/configs/yucca_defconfig index 10fbafc..127f1e0 100644 --- a/configs/yucca_defconfig +++ b/configs/yucca_defconfig @@ -9,6 +9,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_EEPROM=y CONFIG_LOOPW=y CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig index 06e915c..0b38f2b 100644 --- a/configs/zipitz2_defconfig +++ b/configs/zipitz2_defconfig @@ -19,5 +19,6 @@ CONFIG_PXA_SERIAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_LCD=y +CONFIG_LZMA=y CONFIG_OF_LIBFDT=y # CONFIG_EFI_LOADER is not set diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 4093618..2d7fffc 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -16,6 +16,10 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 3c3a5b2..7ca69a9 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -12,6 +12,10 @@ CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index c59d7f5..44e6850 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -12,12 +12,17 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index c73bacb..825346a 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -12,12 +12,17 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index ececcb4..a1ef49f 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -15,6 +15,10 @@ CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 980382c..dc49372 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -14,6 +14,10 @@ CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 48caf31..16cd613 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -11,6 +11,10 @@ CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 23bcb0e..4396db0 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -13,6 +13,10 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 26a5320..2887ca4 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -16,6 +16,10 @@ CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index af7fe65..e5be0d1 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -12,12 +12,17 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/doc/README.JFFS2 b/doc/README.JFFS2 index 604e5b9..0245da0 100644 --- a/doc/README.JFFS2 +++ b/doc/README.JFFS2 @@ -10,6 +10,9 @@ fsinfo - print information about file systems ls - list files in a directory chpart - change active partition +If you do now need the commands, you can enable the filesystem separately +with CONFIG_FS_JFFS2 and call the jffs2 functions yourself. + If you boot from a partition which is mounted writable, and you update your boot environment by replacing single files on that partition, you should also define CONFIG_SYS_JFFS2_SORT_FRAGMENTS. Scanning diff --git a/doc/uImage.FIT/howto.txt b/doc/uImage.FIT/howto.txt index 14e316f..2988a52 100644 --- a/doc/uImage.FIT/howto.txt +++ b/doc/uImage.FIT/howto.txt @@ -44,6 +44,27 @@ image source file mkimage + dtc transfer to target + ---------------> image file --------------------> bootm image data file(s) +SPL usage +--------- + +The SPL can make use of the new image format as well, this traditionally +is used to ship multiple device tree files within one image. Code in the SPL +will choose the one matching the current board and append this to the +U-Boot proper binary to be automatically used up by it. +Aside from U-Boot proper and one device tree blob the SPL can load multiple, +arbitrary image files as well. These binaries should be specified in their +own subnode under the /images node, which should then be referenced from one or +multiple /configurations subnodes. The required images must be enumerated in +the "loadables" property as a list of strings. + +If a platform specific image source file (.its) is shipped with the U-Boot +source, it can be specified using the CONFIG_SPL_FIT_SOURCE Kconfig symbol. +In this case it will be automatically used by U-Boot's Makefile to generate +the image. +If a static source file is not flexible enough, CONFIG_SPL_FIT_GENERATOR +can point to a script which generates this image source file during +the build process. It gets passed a list of device tree files (taken from the +CONFIG_OF_LIST symbol). Example 1 -- old-style (non-FDT) kernel booting ----------------------------------------------- diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its new file mode 100644 index 0000000..e5551d4 --- /dev/null +++ b/doc/uImage.FIT/multi_spl.its @@ -0,0 +1,89 @@ +/dts-v1/; + +/* + * (Bogus) example FIT image description file demonstrating the usage + * of multiple images loaded by the SPL. + * Several binaries will be loaded at their respective load addresses. + * Finally the one image specifying an entry point will be entered by the SPL. + */ + +/ { + description = "multiple firmware blobs and U-Boot, loaded by SPL"; + #address-cells = <0x1>; + + images { + + uboot { + description = "U-Boot (64-bit)"; + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x4a000000>; + }; + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x18000>; + entry = <0x18000>; + }; + + mgmt-firmware { + description = "arisc management processor firmware"; + type = "firmware"; + arch = "or1k"; + compression = "none"; + load = <0x40000>; + }; + + fdt@1 { + description = "Pine64+ DT"; + type = "flat_dt"; + compression = "none"; + load = <0x4fa00000>; + arch = "arm64"; + }; + + fdt@2 { + description = "Pine64 DT"; + type = "flat_dt"; + compression = "none"; + load = <0x4fa00000>; + arch = "arm64"; + }; + + kernel { + description = "4.7-rc5 kernel"; + type = "kernel"; + compression = "none"; + load = <0x40080000>; + arch = "arm64"; + }; + + initrd { + description = "Debian installer initrd"; + type = "ramdisk"; + compression = "none"; + load = <0x4fe00000>; + arch = "arm64"; + }; + }; + + configurations { + default = "config@1"; + + config@1 { + description = "sun50i-a64-pine64-plus"; + loadables = "uboot", "atf", "kernel", "initrd"; + fdt = "fdt@1"; + }; + + config@2 { + description = "sun50i-a64-pine64"; + loadables = "uboot", "atf", "mgmt-firmware"; + fdt = "fdt@2"; + }; + }; +}; diff --git a/drivers/Kconfig b/drivers/Kconfig index a5f24d7..a736386 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -30,8 +30,6 @@ source "drivers/fpga/Kconfig" source "drivers/gpio/Kconfig" -source "drivers/hwmon/Kconfig" - source "drivers/i2c/Kconfig" source "drivers/input/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 64c39d3..058bccb 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -74,7 +74,6 @@ obj-$(CONFIG_CPU) += cpu/ obj-y += crypto/ obj-y += firmware/ obj-$(CONFIG_FPGA) += fpga/ -obj-y += hwmon/ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ obj-y += pcmcia/ @@ -87,7 +86,6 @@ obj-y += spmi/ obj-y += sysreset/ obj-y += timer/ obj-y += tpm/ -obj-y += twserial/ obj-y += video/ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6cbe145..931defd 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -59,3 +59,11 @@ config DWC_AHCI Synopsys DWC AHCI module. endmenu + +config IDE + bool "Support IDE controllers" + help + Enables support for IDE (Integrated Drive Electronics) hard drives. + This allows access to raw blocks and filesystems on an IDE drive + from U-Boot. See also CMD_IDE which provides an 'ide' command for + performing various IDE operations. diff --git a/drivers/block/Makefile b/drivers/block/Makefile index d89c8b0..0645096 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_DM_SCSI) += scsi-uclass.o obj-$(CONFIG_SCSI_AHCI) += ahci.o obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o obj-$(CONFIG_FSL_SATA) += fsl_sata.o +obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_IDE_FTIDE020) += ftide020.o obj-$(CONFIG_LIBATA) += libata.o obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o diff --git a/common/ide.c b/drivers/block/ide.c index ac5b91c..ac5b91c 100644 --- a/common/ide.c +++ b/drivers/block/ide.c diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c index 3ca64b9..b1db257 100644 --- a/drivers/block/sil680.c +++ b/drivers/block/sil680.c @@ -17,7 +17,7 @@ * incorrect for the target board (e.g. the sequoia board requires 0). * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 * - * #define CONFIG_CMD_IDE + * #define CONFIG_IDE * #undef CONFIG_IDE_8xx_DIRECT * #undef CONFIG_IDE_LED * #undef CONFIG_IDE_RESET diff --git a/drivers/crypto/fsl/Kconfig b/drivers/crypto/fsl/Kconfig index 3188959..181a1e5 100644 --- a/drivers/crypto/fsl/Kconfig +++ b/drivers/crypto/fsl/Kconfig @@ -1,5 +1,7 @@ config FSL_CAAM bool "Freescale Crypto Driver Support" + select SHA_HW_ACCEL + imply CMD_HASH help Enables the Freescale's Cryptographic Accelerator and Assurance Module (CAAM), also known as the SEC version 4 (SEC4). The driver uses diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig deleted file mode 100644 index e69de29..0000000 --- a/drivers/hwmon/Kconfig +++ /dev/null diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile deleted file mode 100644 index b4fb057..0000000 --- a/drivers/hwmon/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2001 -# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -#ccflags-y += -DDEBUG - -obj-$(CONFIG_DTT_ADM1021) += adm1021.o -obj-$(CONFIG_DTT_ADT7460) += adt7460.o -obj-$(CONFIG_DTT_DS1621) += ds1621.o -obj-$(CONFIG_DTT_DS1722) += ds1722.o -obj-$(CONFIG_DTT_DS1775) += ds1775.o -obj-$(CONFIG_DTT_DS620) += ds620.o -obj-$(CONFIG_DTT_LM63) += lm63.o -obj-$(CONFIG_DTT_LM73) += lm73.o -obj-$(CONFIG_DTT_LM75) += lm75.o -obj-$(CONFIG_DTT_LM81) += lm81.o diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c deleted file mode 100644 index 99e942b..0000000 --- a/drivers/hwmon/adm1021.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2003 - * Murray Jensen, CSIRO-MIT, Murray.Jensen@csiro.au - * - * based on dtt/lm75.c which is ... - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Analog Devices's ADM1021 - * "Low Cost Microprocessor System Temperature Monitor" - */ - -#include <common.h> - -#include <i2c.h> -#include <dtt.h> - -#define DTT_READ_LOC_VALUE 0x00 -#define DTT_READ_REM_VALUE 0x01 -#define DTT_READ_STATUS 0x02 -#define DTT_READ_CONFIG 0x03 -#define DTT_READ_CONVRATE 0x04 -#define DTT_READ_LOC_HIGHLIM 0x05 -#define DTT_READ_LOC_LOWLIM 0x06 -#define DTT_READ_REM_HIGHLIM 0x07 -#define DTT_READ_REM_LOWLIM 0x08 -#define DTT_READ_DEVID 0xfe - -#define DTT_WRITE_CONFIG 0x09 -#define DTT_WRITE_CONVRATE 0x0a -#define DTT_WRITE_LOC_HIGHLIM 0x0b -#define DTT_WRITE_LOC_LOWLIM 0x0c -#define DTT_WRITE_REM_HIGHLIM 0x0d -#define DTT_WRITE_REM_LOWLIM 0x0e -#define DTT_WRITE_ONESHOT 0x0f - -#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */ -#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */ -#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */ -#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */ -#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */ -#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */ - -#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */ -#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */ - -#define DTT_ADM1021_DEVID 0x41 - -typedef - struct { - uint i2c_addr:7; /* 7bit i2c chip address */ - uint conv_rate:3; /* conversion rate */ - uint enable_alert:1; /* enable alert output pin */ - uint enable_local:1; /* enable internal temp sensor */ - uint max_local:8; /* internal temp maximum */ - uint min_local:8; /* internal temp minimum */ - uint enable_remote:1; /* enable remote temp sensor */ - uint max_remote:8; /* remote temp maximum */ - uint min_remote:8; /* remote temp minimum */ - } -dtt_cfg_t; - -dtt_cfg_t dttcfg[] = CONFIG_SYS_DTT_ADM1021; - -int -dtt_read (int sensor, int reg) -{ - dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; - uchar data; - - if (i2c_read(dcp->i2c_addr, reg, 1, &data, 1) != 0) - return -1; - - return (int)data; -} /* dtt_read() */ - -int -dtt_write (int sensor, int reg, int val) -{ - dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; - uchar data; - - data = (uchar)(val & 0xff); - - if (i2c_write(dcp->i2c_addr, reg, 1, &data, 1) != 0) - return 1; - - return 0; -} /* dtt_write() */ - -int -dtt_init_one(int sensor) -{ - dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; - int reg, val; - - if (((sensor & 1) == 0 ? dcp->enable_local : dcp->enable_remote) == 0) - return 1; /* sensor is disabled (or rather ignored) */ - - /* - * Setup High Limit register - */ - if ((sensor & 1) == 0) { - reg = DTT_WRITE_LOC_HIGHLIM; - val = dcp->max_local; - } - else { - reg = DTT_WRITE_REM_HIGHLIM; - val = dcp->max_remote; - } - if (dtt_write (sensor, reg, val) != 0) - return 1; - - /* - * Setup Low Limit register - */ - if ((sensor & 1) == 0) { - reg = DTT_WRITE_LOC_LOWLIM; - val = dcp->min_local; - } - else { - reg = DTT_WRITE_REM_LOWLIM; - val = dcp->min_remote; - } - if (dtt_write (sensor, reg, val) != 0) - return 1; - - /* shouldn't hurt if the rest gets done twice */ - - /* - * Setup Conversion Rate register - */ - if (dtt_write (sensor, DTT_WRITE_CONVRATE, dcp->conv_rate) != 0) - return 1; - - /* - * Setup configuraton register - */ - val = 0; /* running */ - if (dcp->enable_alert == 0) - val |= DTT_CONFIG_ALERT_MASKED; /* mask ALERT pin */ - if (dtt_write (sensor, DTT_WRITE_CONFIG, val) != 0) - return 1; - - return 0; -} /* dtt_init_one() */ - -int -dtt_get_temp (int sensor) -{ - signed char val; - - if ((sensor & 1) == 0) - val = dtt_read(sensor, DTT_READ_LOC_VALUE); - else - val = dtt_read(sensor, DTT_READ_REM_VALUE); - - return (int) val; -} /* dtt_get_temp() */ diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c deleted file mode 100644 index 9b2c5b6..0000000 --- a/drivers/hwmon/adt7460.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@gmail.com - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -#define ADT7460_ADDRESS 0x2c -#define ADT7460_INVALID 128 -#define ADT7460_CONFIG 0x40 -#define ADT7460_REM1_TEMP 0x25 -#define ADT7460_LOCAL_TEMP 0x26 -#define ADT7460_REM2_TEMP 0x27 - -int dtt_read(int sensor, int reg) -{ - u8 dir = reg; - u8 data; - - if (i2c_read(ADT7460_ADDRESS, dir, 1, &data, 1) == -1) - return -1; - if (data == ADT7460_INVALID) - return -1; - - return data; -} - -int dtt_write(int sensor, int reg, int val) -{ - u8 dir = reg; - u8 data = val; - - if (i2c_write(ADT7460_ADDRESS, dir, 1, &data, 1) == -1) - return -1; - - return 0; -} - -int dtt_init_one(int sensor) -{ - printf("ADT7460 at I2C address 0x%2x\n", ADT7460_ADDRESS); - - if (dtt_write(0, ADT7460_CONFIG, 1) == -1) { - puts("Error initialiting ADT7460\n"); - return -1; - } - - return 0; -} - -int dtt_get_temp(int sensor) -{ - int aux; - u8 table[] = - { ADT7460_REM1_TEMP, ADT7460_LOCAL_TEMP, ADT7460_REM2_TEMP }; - - if (sensor > 2) { - puts("DTT sensor does not exist\n"); - return -1; - } - - aux = dtt_read(0, table[sensor]); - if (aux == -1) { - puts("DTT temperature read failed\n"); - return -1; - } - - return aux; -} diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c deleted file mode 100644 index 66947a6..0000000 --- a/drivers/hwmon/ds1621.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * (C) Copyright 2001 - * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Dallas Semiconductor's DS1621/1631 Digital Thermometer and Thermostat. - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */ -#define DTT_READ_TEMP 0xAA -#define DTT_READ_COUNTER 0xA8 -#define DTT_READ_SLOPE 0xA9 -#define DTT_WRITE_START_CONV 0xEE -#define DTT_WRITE_STOP_CONV 0x22 -#define DTT_TEMP_HIGH 0xA1 -#define DTT_TEMP_LOW 0xA2 -#define DTT_CONFIG 0xAC - -/* - * Config register bits - */ -#define DTT_CONFIG_1SHOT 0x01 -#define DTT_CONFIG_POLARITY 0x02 -#define DTT_CONFIG_R0 0x04 /* ds1631 only */ -#define DTT_CONFIG_R1 0x08 /* ds1631 only */ -#define DTT_CONFIG_NVB 0x10 -#define DTT_CONFIG_TLF 0x20 -#define DTT_CONFIG_THF 0x40 -#define DTT_CONFIG_DONE 0x80 - - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - - /* Calculate sensor address and command */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1621*/ - - /* Prepare to handle 2 byte result */ - switch(reg) { - case DTT_READ_TEMP: - case DTT_TEMP_HIGH: - case DTT_TEMP_LOW: - dlen = 2; - break; - default: - dlen = 1; - } - - /* Now try to read the register */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return 1; - - /* Handle 2 byte result */ - if (dlen == 2) - return (short)((data[0] << 8) | data[1]); - - return (int)data[0]; -} - - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* Calculate sensor address and register */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); - - /* Handle various data sizes. */ - switch(reg) { - case DTT_READ_TEMP: - case DTT_TEMP_HIGH: - case DTT_TEMP_LOW: - dlen = 2; - data[0] = (char)((val >> 8) & 0xff); /* MSB first */ - data[1] = (char)(val & 0xff); - break; - case DTT_WRITE_START_CONV: - case DTT_WRITE_STOP_CONV: - dlen = 0; - data[0] = (char)0; - data[1] = (char)0; - break; - default: - dlen = 1; - data[0] = (char)(val & 0xff); - } - - /* Write value to device */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - /* Poll NV memory busy bit in case write was to register stored in EEPROM */ - while(i2c_reg_read(sensor, DTT_CONFIG) & DTT_CONFIG_NVB) - ; - - return 0; -} - - -int dtt_init_one(int sensor) -{ - int val; - - /* Setup High Temp */ - val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0) - return 1; - - /* Setup Low Temp - hysteresis */ - val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0) - return 1; - - /* - * Setup configuraton register - * - * Clear THF & TLF, Reserved = 1, Polarity = Active Low, One Shot = YES - * - * We run in polled mode, since there isn't any way to know if this - * lousy device is ready to provide temperature readings on power up. - */ - val = 0x9; - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - - return 0; -} - -int dtt_get_temp(int sensor) -{ - int i; - - /* Start a conversion, may take up to 1 second. */ - dtt_write(sensor, DTT_WRITE_START_CONV, 0); - for (i = 0; i <= 10; i++) { - udelay(100000); - if (dtt_read(sensor, DTT_CONFIG) & DTT_CONFIG_DONE) - break; - } - - return (dtt_read(sensor, DTT_READ_TEMP) / 256); -} diff --git a/drivers/hwmon/ds1722.c b/drivers/hwmon/ds1722.c deleted file mode 100644 index c469588..0000000 --- a/drivers/hwmon/ds1722.c +++ /dev/null @@ -1,137 +0,0 @@ -#include <common.h> -#include <asm/ic/ssi.h> -#include <ds1722.h> - -static void ds1722_select(int dev) -{ - ssi_set_interface(4096, 0, 0, 0); - ssi_chip_select(0); - udelay(1); - ssi_chip_select(dev); - udelay(1); -} - - -u8 ds1722_read(int dev, int addr) -{ - u8 res; - - ds1722_select(dev); - - ssi_tx_byte(addr); - res = ssi_rx_byte(); - - ssi_chip_select(0); - - return res; -} - -void ds1722_write(int dev, int addr, u8 data) -{ - ds1722_select(dev); - - ssi_tx_byte(0x80|addr); - ssi_tx_byte(data); - - ssi_chip_select(0); -} - - -u16 ds1722_temp(int dev, int resolution) -{ - static int useconds[] = { - 75000, 150000, 300000, 600000, 1200000 - }; - char temp; - u16 res; - - - /* set up the desired resulotion ... */ - ds1722_write(dev, 0, 0xe0 | (resolution << 1)); - - /* wait while the chip measures the tremperature */ - udelay(useconds[resolution]); - - res = (temp = ds1722_read(dev, 2)) << 8; - - if (temp < 0) { - temp = (16 - (ds1722_read(dev, 1) >> 4)) & 0x0f; - } else { - temp = (ds1722_read(dev, 1) >> 4); - } - - switch (temp) { - case 0: - /* .0000 */ - break; - case 1: - /* .0625 */ - res |=1; - break; - case 2: - /* .1250 */ - res |=1; - break; - case 3: - /* .1875 */ - res |=2; - break; - case 4: - /* .2500 */ - res |=3; - break; - case 5: - /* .3125 */ - res |=3; - break; - case 6: - /* .3750 */ - res |=4; - break; - case 7: - /* .4375 */ - res |=4; - break; - case 8: - /* .5000 */ - res |=5; - break; - case 9: - /* .5625 */ - res |=6; - break; - case 10: - /* .6250 */ - res |=6; - break; - case 11: - /* .6875 */ - res |=7; - break; - case 12: - /* .7500 */ - res |=8; - break; - case 13: - /* .8125 */ - res |=8; - break; - case 14: - /* .8750 */ - res |=9; - break; - case 15: - /* .9375 */ - res |=9; - break; - } - return res; - -} - -int ds1722_probe(int dev) -{ - u16 temp = ds1722_temp(dev, DS1722_RESOLUTION_12BIT); - printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff); - return 0; -} diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c deleted file mode 100644 index b95b130..0000000 --- a/drivers/hwmon/ds1775.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Dallas Semiconductor's DS1775 Digital Thermometer and Thermostat - */ - -#include <common.h> - -#include <i2c.h> -#include <dtt.h> - -#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */ -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_OS 0x3 - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and command - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1775 */ - - /* - * Prepare to handle 2 byte result - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) - dlen = 2; - else - dlen = 1; - - /* - * Now try to read the register - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return 1; - - /* - * Handle 2 byte result - */ - if (dlen == 2) - return ((int)((short)data[1] + (((short)data[0]) << 8))); - - return (int) data[0]; -} - - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and register - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); - - /* - * Handle various data sizes - */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_OS) || (reg == DTT_TEMP_HYST)) { - dlen = 2; - data[0] = (char)((val >> 8) & 0xff); /* MSB first */ - data[1] = (char)(val & 0xff); - } else { - dlen = 1; - data[0] = (char)(val & 0xff); - } - - /* - * Write value to device - */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - return 0; -} - - -int dtt_init_one(int sensor) -{ - int val; - - /* - * Setup High Temp - */ - val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_OS, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - /* - * Setup Low Temp - hysteresis - */ - val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - /* - * Setup configuraton register - * - * Fault Tolerance limits 4, Thermometer resolution bits is 9, - * Polarity = Active Low,continuous conversion mode, Thermostat - * mode is interrupt mode - */ - val = 0xa; - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - udelay(50000); /* Max 50ms */ - - return 0; -} - -int dtt_get_temp(int sensor) -{ - return (dtt_read(sensor, DTT_READ_TEMP) / 256); -} diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c deleted file mode 100644 index 1ecc3da..0000000 --- a/drivers/hwmon/ds620.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * DS620 DTT support - * - * (C) Copyright 2014 3ADEV <http://www.3adev.com> - * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Dallas Semiconductor's DS1621/1631 Digital Thermometer and Thermostat. - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x48 -#define DTT_START_CONVERT 0x51 -#define DTT_TEMP 0xAA -#define DTT_CONFIG 0xAC - -/* - * Config register MSB bits - */ -#define DTT_CONFIG_1SHOT 0x01 -#define DTT_CONFIG_AUTOC 0x02 -#define DTT_CONFIG_R0 0x04 /* always 1 */ -#define DTT_CONFIG_R1 0x08 /* always 1 */ -#define DTT_CONFIG_TLF 0x10 -#define DTT_CONFIG_THF 0x20 -#define DTT_CONFIG_NVB 0x40 -#define DTT_CONFIG_DONE 0x80 - -#define CHIP(sensor) (DTT_I2C_DEV_CODE + (sensor & 0x07)) - -int dtt_init_one(int sensor) -{ - uint8_t config = DTT_CONFIG_1SHOT - | DTT_CONFIG_R0 - | DTT_CONFIG_R1; - return i2c_write(CHIP(sensor), DTT_CONFIG, 1, &config, 1); -} - -int dtt_get_temp(int sensor) -{ - uint8_t status; - uint8_t temp[2]; - - /* Start a conversion, may take up to 1 second. */ - i2c_write(CHIP(sensor), DTT_START_CONVERT, 1, NULL, 0); - do { - if (i2c_read(CHIP(sensor), DTT_CONFIG, 1, &status, 1)) - /* bail out if I2C error */ - status |= DTT_CONFIG_DONE; - } while (!(status & DTT_CONFIG_DONE)); - if (i2c_read(CHIP(sensor), DTT_TEMP, 1, temp, 2)) - /* bail out if I2C error */ - return -274; /* below absolute zero == error */ - - return ((int16_t)(temp[1] | (temp[0] << 8))) >> 7; -} diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c deleted file mode 100644 index 053c785..0000000 --- a/drivers/hwmon/lm63.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de - * based on lm75.c by Bill Hunter - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * National LM63/LM64 Temperature Sensor - * Main difference: LM 64 has -16 Kelvin temperature offset - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -#define DTT_I2C_LM63_ADDR 0x4C /* National LM63 device */ - -#define DTT_READ_TEMP_RMT_MSB 0x01 -#define DTT_CONFIG 0x03 -#define DTT_READ_TEMP_RMT_LSB 0x10 -#define DTT_TACHLIM_LSB 0x48 -#define DTT_TACHLIM_MSB 0x49 -#define DTT_FAN_CONFIG 0x4A -#define DTT_PWM_FREQ 0x4D -#define DTT_PWM_LOOKUP_BASE 0x50 - -struct pwm_lookup_entry { - u8 temp; - u8 pwm; -}; - -/* - * Device code - */ - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and register. - */ - if (!sensor) - sensor = DTT_I2C_LM63_ADDR; /* legacy config */ - - dlen = 1; - - /* - * Now try to read the register. - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return -1; - - return (int)data[0]; -} /* dtt_read() */ - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* - * Calculate sensor address and register. - */ - if (!sensor) - sensor = DTT_I2C_LM63_ADDR; /* legacy config */ - - dlen = 1; - data[0] = (char)(val & 0xff); - - /* - * Write value to register. - */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - return 0; -} /* dtt_write() */ - -static int is_lm64(int sensor) -{ - return sensor && (sensor != DTT_I2C_LM63_ADDR); -} - -int dtt_init_one(int sensor) -{ - int i; - int val; - - struct pwm_lookup_entry pwm_lookup[] = CONFIG_DTT_PWM_LOOKUPTABLE; - - /* - * Set PWM Frequency to 2.5% resolution - */ - val = 20; - if (dtt_write(sensor, DTT_PWM_FREQ, val) != 0) - return 1; - - /* - * Set Tachometer Limit - */ - val = CONFIG_DTT_TACH_LIMIT; - if (dtt_write(sensor, DTT_TACHLIM_LSB, val & 0xff) != 0) - return 1; - if (dtt_write(sensor, DTT_TACHLIM_MSB, (val >> 8) & 0xff) != 0) - return 1; - - /* - * Make sure PWM Lookup-Table is writeable - */ - if (dtt_write(sensor, DTT_FAN_CONFIG, 0x20) != 0) - return 1; - - /* - * Setup PWM Lookup-Table - */ - for (i = 0; i < ARRAY_SIZE(pwm_lookup); i++) { - int address = DTT_PWM_LOOKUP_BASE + 2 * i; - val = pwm_lookup[i].temp; - if (is_lm64(sensor)) - val -= 16; - if (dtt_write(sensor, address, val) != 0) - return 1; - val = dtt_read(sensor, address); - val = pwm_lookup[i].pwm; - if (dtt_write(sensor, address + 1, val) != 0) - return 1; - } - - /* - * Enable PWM Lookup-Table, PWM Clock 360 kHz, Tachometer Mode 2 - */ - val = 0x02; - if (dtt_write(sensor, DTT_FAN_CONFIG, val) != 0) - return 1; - - /* - * Enable Tach input - */ - val = dtt_read(sensor, DTT_CONFIG) | 0x04; - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - - return 0; -} - -int dtt_get_temp(int sensor) -{ - s16 temp = (dtt_read(sensor, DTT_READ_TEMP_RMT_MSB) << 8) - | (dtt_read(sensor, DTT_READ_TEMP_RMT_LSB)); - - if (is_lm64(sensor)) - temp += 16 << 8; - - /* Ignore LSB for now, U-Boot only prints natural numbers */ - return temp >> 8; -} diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c deleted file mode 100644 index c15c751..0000000 --- a/drivers/hwmon/lm73.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Larry Johnson, lrj@acm.org - * - * based on dtt/lm75.c which is ... - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * National Semiconductor LM73 Temperature Sensor - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x48 /* National Semi's LM73 device */ -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HIGH 0x2 -#define DTT_TEMP_LOW 0x3 -#define DTT_CONTROL 0x4 -#define DTT_ID 0x7 - -int dtt_read(int const sensor, int const reg) -{ - int dlen; - uint8_t data[2]; - - /* - * Validate 'reg' param and get register size. - */ - switch (reg) { - case DTT_CONFIG: - case DTT_CONTROL: - dlen = 1; - break; - case DTT_READ_TEMP: - case DTT_TEMP_HIGH: - case DTT_TEMP_LOW: - case DTT_ID: - dlen = 2; - break; - default: - return -1; - } - /* - * Try to read the register at the calculated sensor address. - */ - if (0 != - i2c_read(DTT_I2C_DEV_CODE + (sensor & 0x07), reg, 1, data, dlen)) - return -1; - /* - * Handle 2 byte result. - */ - if (2 == dlen) - return (int)((unsigned)data[0] << 8 | (unsigned)data[1]); - - return (int)data[0]; -} /* dtt_read() */ - -int dtt_write(int const sensor, int const reg, int const val) -{ - int dlen; - uint8_t data[2]; - - /* - * Validate 'reg' param and handle register size - */ - switch (reg) { - case DTT_CONFIG: - case DTT_CONTROL: - dlen = 1; - data[0] = (uint8_t) val; - break; - case DTT_TEMP_HIGH: - case DTT_TEMP_LOW: - dlen = 2; - data[0] = (uint8_t) (val >> 8); /* MSB first */ - data[1] = (uint8_t) val; - break; - default: - return -1; - } - /* - * Write value to register at the calculated sensor address. - */ - return 0 != i2c_write(DTT_I2C_DEV_CODE + (sensor & 0x07), reg, 1, data, - dlen); -} /* dtt_write() */ - -int dtt_init_one(int const sensor) -{ - int val; - - /* - * Validate the Identification register - */ - if (0x0190 != dtt_read(sensor, DTT_ID)) - return -1; - /* - * Setup THIGH (upper-limit) and TLOW (lower-limit) registers - */ - val = CONFIG_SYS_DTT_MAX_TEMP << 7; - if (dtt_write(sensor, DTT_TEMP_HIGH, val)) - return -1; - - val = CONFIG_SYS_DTT_MIN_TEMP << 7; - if (dtt_write(sensor, DTT_TEMP_LOW, val)) - return -1; - /* - * Setup configuraton register - */ - /* config = alert active low, disabled, and reset */ - val = 0x64; - if (dtt_write(sensor, DTT_CONFIG, val)) - return -1; - /* - * Setup control/status register - */ - /* control = temp resolution 0.25C */ - val = 0x00; - if (dtt_write(sensor, DTT_CONTROL, val)) - return -1; - - dtt_read(sensor, DTT_CONTROL); /* clear temperature flags */ - return 0; -} /* dtt_init_one() */ - -int dtt_get_temp(int const sensor) -{ - int const ret = dtt_read(sensor, DTT_READ_TEMP); - - if (ret < 0) { - printf("DTT temperature read failed.\n"); - return 0; - } - return (int)((int16_t) ret + 0x0040) >> 7; -} /* dtt_get_temp() */ diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c deleted file mode 100644 index 462f902..0000000 --- a/drivers/hwmon/lm75.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * On Semiconductor's LM75 Temperature Sensor - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -/* - * Device code - */ -#if defined(CONFIG_SYS_I2C_DTT_ADDR) -#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR -#else -#define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ -#endif -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_SET 0x3 - -int dtt_read(int sensor, int reg) -{ - int dlen; - uchar data[2]; - -#ifdef CONFIG_DTT_AD7414 - /* - * On AD7414 the first value upon bootup is not read correctly. - * This is most likely because of the 800ms update time of the - * temp register in normal update mode. To get current values - * each time we issue the "dtt" command including upon powerup - * we switch into one-short mode. - * - * Issue one-shot mode command - */ - dtt_write(sensor, DTT_CONFIG, 0x64); -#endif - - /* Validate 'reg' param */ - if((reg < 0) || (reg > 3)) - return -1; - - /* Calculate sensor address and register. */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); - - /* Prepare to handle 2 byte result. */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_HYST) || - (reg == DTT_TEMP_SET)) - dlen = 2; - else - dlen = 1; - - /* Now try to read the register. */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return -1; - - /* Handle 2 byte result. */ - if (dlen == 2) - return ((int)((short)data[1] + (((short)data[0]) << 8))); - - return (int)data[0]; -} /* dtt_read() */ - - -int dtt_write(int sensor, int reg, int val) -{ - int dlen; - uchar data[2]; - - /* Validate 'reg' param */ - if ((reg < 0) || (reg > 3)) - return 1; - - /* Calculate sensor address and register. */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); - - /* Handle 2 byte values. */ - if ((reg == DTT_READ_TEMP) || - (reg == DTT_TEMP_HYST) || - (reg == DTT_TEMP_SET)) { - dlen = 2; - data[0] = (char)((val >> 8) & 0xff); /* MSB first */ - data[1] = (char)(val & 0xff); - } else { - dlen = 1; - data[0] = (char)(val & 0xff); - } - - /* Write value to register. */ - if (i2c_write(sensor, reg, 1, data, dlen) != 0) - return 1; - - return 0; -} /* dtt_write() */ - - -int dtt_init_one(int sensor) -{ - int val; - - /* Setup TSET ( trip point ) register */ - val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */ - if (dtt_write(sensor, DTT_TEMP_SET, val) != 0) - return 1; - - /* Setup THYST ( untrip point ) register - Hysteresis */ - val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80; - if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) - return 1; - - /* Setup configuraton register */ -#ifdef CONFIG_DTT_AD7414 - /* config = alert active low and disabled */ - val = 0x60; -#else - /* config = 6 sample integration, int mode, active low, and enable */ - val = 0x18; -#endif - if (dtt_write(sensor, DTT_CONFIG, val) != 0) - return 1; - - return 0; -} /* dtt_init_one() */ - -int dtt_get_temp(int sensor) -{ - int const ret = dtt_read(sensor, DTT_READ_TEMP); - - if (ret < 0) { - printf("DTT temperature read failed.\n"); - return 0; - } - return (int)((int16_t) ret / 256); -} /* dtt_get_temp() */ diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c deleted file mode 100644 index bcc8d32..0000000 --- a/drivers/hwmon/lm81.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * (C) Copyright 2006 - * Heiko Schocher, DENX Software Enginnering <hs@denx.de> - * - * based on dtt/lm75.c which is ... - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * On Semiconductor's LM81 Temperature Sensor - */ - -#include <common.h> -#include <i2c.h> -#include <dtt.h> - -/* - * Device code - */ -#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ -#define DTT_READ_TEMP 0x27 -#define DTT_CONFIG_TEMP 0x4b -#define DTT_TEMP_MAX 0x39 -#define DTT_TEMP_HYST 0x3a -#define DTT_CONFIG 0x40 - -int dtt_read(int sensor, int reg) -{ - int dlen = 1; - uchar data[2]; - - /* - * Calculate sensor address and register. - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ - - /* - * Now try to read the register. - */ - if (i2c_read(sensor, reg, 1, data, dlen) != 0) - return -1; - - return (int)data[0]; -} /* dtt_read() */ - - -int dtt_write(int sensor, int reg, int val) -{ - uchar data; - - /* - * Calculate sensor address and register. - */ - sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ - - data = (char)(val & 0xff); - - /* - * Write value to register. - */ - if (i2c_write(sensor, reg, 1, &data, 1) != 0) - return 1; - - return 0; -} /* dtt_write() */ - -#define DTT_MANU 0x3e -#define DTT_REV 0x3f -#define DTT_CONFIG 0x40 -#define DTT_ADR 0x48 - -int dtt_init_one(int sensor) -{ - int man; - int adr; - int rev; - - if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0) - return 1; - /* The LM81 needs 400ms to get the correct values ... */ - udelay (400000); - man = dtt_read (sensor, DTT_MANU); - if (man != 0x01) - return 1; - adr = dtt_read (sensor, DTT_ADR); - if (adr < 0) - return 1; - rev = dtt_read (sensor, DTT_REV); - if (rev < 0) - return 1; - - debug ("DTT: Found LM81@%x Rev: %d\n", adr, rev); - return 0; -} /* dtt_init_one() */ - - -#define TEMP_FROM_REG(temp) \ - ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ - ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ - -int dtt_get_temp(int sensor) -{ - int val = dtt_read (sensor, DTT_READ_TEMP); - int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP); - - return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; -} /* dtt_get_temp() */ diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1aae4bc..ecca159 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -75,6 +75,14 @@ config CROS_EC_SPI provides a faster and more robust interface than I2C but the bugs are less interesting. +config DS4510 + bool "Enable support for DS4510 CPU supervisor" + help + Enable support for the Maxim DS4510 CPU supervisor. It has an + integrated 64-byte EEPROM, four programmable non-volatile I/O pins + and a configurable timer for the supervisor function. The device is + connected over I2C. + config FSL_SEC_MON bool "Enable FSL SEC_MON Driver" help diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index d7c9bd7..55f8936 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -12,12 +12,7 @@ #include <common.h> #include <i2c.h> #include <command.h> -#include <ds4510.h> - -/* Default to an address that hopefully won't corrupt other i2c devices */ -#ifndef CONFIG_SYS_I2C_DS4510_ADDR -#define CONFIG_SYS_I2C_DS4510_ADDR (~0) -#endif +#include "ds4510.h" enum { DS4510_CMD_INFO, @@ -35,7 +30,7 @@ enum { /* * Write to DS4510, taking page boundaries into account */ -int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count) +static int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count) { int wrlen; int i = 0; @@ -64,7 +59,7 @@ int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count) /* * General read from DS4510 */ -int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count) +static int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count) { return i2c_read(chip, offset, 1, buf, count); } @@ -74,7 +69,7 @@ int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count) * nv = 0 - Writes to SEEPROM registers behave like EEPROM * nv = 1 - Writes to SEEPROM registers behave like SRAM */ -int ds4510_see_write(uint8_t chip, uint8_t nv) +static int ds4510_see_write(uint8_t chip, uint8_t nv) { uint8_t data; @@ -92,7 +87,7 @@ int ds4510_see_write(uint8_t chip, uint8_t nv) /* * Write de-assertion of reset signal delay */ -int ds4510_rstdelay_write(uint8_t chip, uint8_t delay) +static int ds4510_rstdelay_write(uint8_t chip, uint8_t delay) { uint8_t data; @@ -108,7 +103,7 @@ int ds4510_rstdelay_write(uint8_t chip, uint8_t delay) /* * Write pullup characteristics of IO pins */ -int ds4510_pullup_write(uint8_t chip, uint8_t val) +static int ds4510_pullup_write(uint8_t chip, uint8_t val) { val &= DS4510_IO_MASK; @@ -118,7 +113,7 @@ int ds4510_pullup_write(uint8_t chip, uint8_t val) /* * Read pullup characteristics of IO pins */ -int ds4510_pullup_read(uint8_t chip) +static int ds4510_pullup_read(uint8_t chip) { uint8_t val; @@ -131,7 +126,7 @@ int ds4510_pullup_read(uint8_t chip) /* * Write drive level of IO pins */ -int ds4510_gpio_write(uint8_t chip, uint8_t val) +static int ds4510_gpio_write(uint8_t chip, uint8_t val) { uint8_t data; int i; @@ -155,7 +150,7 @@ int ds4510_gpio_write(uint8_t chip, uint8_t val) /* * Read drive level of IO pins */ -int ds4510_gpio_read(uint8_t chip) +static int ds4510_gpio_read(uint8_t chip) { uint8_t data; int val = 0; @@ -175,7 +170,7 @@ int ds4510_gpio_read(uint8_t chip) /* * Read physical level of IO pins */ -int ds4510_gpio_read_val(uint8_t chip) +static int ds4510_gpio_read_val(uint8_t chip) { uint8_t val; @@ -185,8 +180,6 @@ int ds4510_gpio_read_val(uint8_t chip) return val & DS4510_IO_MASK; } -#ifdef CONFIG_CMD_DS4510 -#ifdef CONFIG_CMD_DS4510_INFO /* * Display DS4510 information */ @@ -240,7 +233,6 @@ static int ds4510_info(uint8_t chip) return 0; } -#endif /* CONFIG_CMD_DS4510_INFO */ cmd_tbl_t cmd_ds4510[] = { U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""), @@ -248,33 +240,25 @@ cmd_tbl_t cmd_ds4510[] = { U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""), U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""), U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""), -#ifdef CONFIG_CMD_DS4510_INFO U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""), -#endif -#ifdef CONFIG_CMD_DS4510_RST U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""), -#endif -#ifdef CONFIG_CMD_DS4510_MEM U_BOOT_CMD_MKENT(eeprom, 6, 0, (void *)DS4510_CMD_EEPROM, "", ""), U_BOOT_CMD_MKENT(seeprom, 6, 0, (void *)DS4510_CMD_SEEPROM, "", ""), U_BOOT_CMD_MKENT(sram, 6, 0, (void *)DS4510_CMD_SRAM, "", ""), -#endif }; int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - static uint8_t chip = CONFIG_SYS_I2C_DS4510_ADDR; + static uint8_t chip = 0x51; cmd_tbl_t *c; ulong ul_arg2 = 0; ulong ul_arg3 = 0; int tmp; -#ifdef CONFIG_CMD_DS4510_MEM ulong addr; ulong off; ulong cnt; int end; int (*rw_func)(uint8_t, int, uint8_t *, int); -#endif c = find_cmd_tbl(argv[1], cmd_ds4510, ARRAY_SIZE(cmd_ds4510)); @@ -324,15 +308,10 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else tmp &= ~(1 << ul_arg2); return ds4510_pullup_write(chip, tmp); -#ifdef CONFIG_CMD_DS4510_INFO case DS4510_CMD_INFO: return ds4510_info(chip); -#endif -#ifdef CONFIG_CMD_DS4510_RST case DS4510_CMD_RSTDELAY: return ds4510_rstdelay_write(chip, ul_arg2); -#endif -#ifdef CONFIG_CMD_DS4510_MEM case DS4510_CMD_EEPROM: end = DS4510_EEPROM + DS4510_EEPROM_SIZE; off = DS4510_EEPROM; @@ -345,13 +324,11 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) end = DS4510_SRAM + DS4510_SRAM_SIZE; off = DS4510_SRAM; break; -#endif default: /* We should never get here... */ return 1; } -#ifdef CONFIG_CMD_DS4510_MEM /* Only eeprom, seeprom, and sram commands should make it here */ if (strcmp(argv[2], "read") == 0) rw_func = ds4510_mem_read; @@ -370,7 +347,6 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rw_func(chip, off, (uint8_t *)addr, cnt); -#endif } U_BOOT_CMD( @@ -378,10 +354,8 @@ U_BOOT_CMD( "ds4510 eeprom/seeprom/sram/gpio access", "device [dev]\n" " - show or set current device address\n" -#ifdef CONFIG_CMD_DS4510_INFO "ds4510 info\n" " - display ds4510 info\n" -#endif "ds4510 output pin 0|1\n" " - set pin low or high-Z\n" "ds4510 input pin\n" @@ -390,12 +364,9 @@ U_BOOT_CMD( " - disable/enable pullup on specified pin\n" "ds4510 nv 0|1\n" " - make gpio and seeprom writes volatile/non-volatile" -#ifdef CONFIG_CMD_DS4510_RST "\n" "ds4510 rstdelay 0-3\n" " - set reset output delay" -#endif -#ifdef CONFIG_CMD_DS4510_MEM "\n" "ds4510 eeprom read addr off cnt\n" "ds4510 eeprom write addr off cnt\n" @@ -406,6 +377,4 @@ U_BOOT_CMD( "ds4510 sram read addr off cnt\n" "ds4510 sram write addr off cnt\n" " - read/write 'cnt' bytes at SRAM offset 'off'" -#endif ); -#endif /* CONFIG_CMD_DS4510 */ diff --git a/include/ds4510.h b/drivers/misc/ds4510.h index e54db35..a6c6c58 100644 --- a/include/ds4510.h +++ b/drivers/misc/ds4510.h @@ -50,14 +50,4 @@ #define DS4510_SRAM 0xfa #define DS4510_SRAM_SIZE 0x06 -int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count); -int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count); -int ds4510_see_write(uint8_t chip, uint8_t nv); -int ds4510_rstdelay_write(uint8_t chip, uint8_t delay); -int ds4510_pullup_write(uint8_t chip, uint8_t val); -int ds4510_pullup_read(uint8_t chip); -int ds4510_gpio_write(uint8_t chip, uint8_t val); -int ds4510_gpio_read(uint8_t chip); -int ds4510_gpio_read_val(uint8_t chip); - #endif /* __DS4510_H_ */ diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c index afd6df6..739d754 100644 --- a/drivers/pcmcia/marubun_pcmcia.c +++ b/drivers/pcmcia/marubun_pcmcia.c @@ -17,7 +17,7 @@ #define CONFIG_PCMCIA #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #define CONFIG_PCMCIA #endif diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c index 1b41e39..dae5560 100644 --- a/drivers/pcmcia/mpc8xx_pcmcia.c +++ b/drivers/pcmcia/mpc8xx_pcmcia.c @@ -9,7 +9,7 @@ #define CONFIG_PCMCIA #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CONFIG_PCMCIA #endif diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c index 45dcb54..edff50f 100644 --- a/drivers/pcmcia/tqm8xx_pcmcia.c +++ b/drivers/pcmcia/tqm8xx_pcmcia.c @@ -15,7 +15,7 @@ #define CONFIG_PCMCIA #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CONFIG_PCMCIA #endif diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 87c3d9c..438681d 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -48,7 +48,6 @@ obj-$(CONFIG_RTC_PCF2127) += pcf2127.o obj-$(CONFIG_RTC_PL031) += pl031.o obj-$(CONFIG_RTC_PT7C4338) += pt7c4338.o obj-$(CONFIG_RTC_RS5C372A) += rs5c372.o -obj-$(CONFIG_RTC_RTC4543) += rtc4543.o obj-$(CONFIG_RTC_RV3029) += rv3029.o obj-$(CONFIG_RTC_RX8025) += rx8025.o obj-$(CONFIG_RTC_S3C24X0) += s3c24x0_rtc.o diff --git a/drivers/rtc/rtc4543.c b/drivers/rtc/rtc4543.c deleted file mode 100644 index 8d36edd..0000000 --- a/drivers/rtc/rtc4543.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * (C) Copyright 2008, 2009 - * Andreas Pfefferle, DENX Software Engineering, ap@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/io.h> -#include <common.h> -#include <command.h> -#include <config.h> -#include <rtc.h> -#include <tws.h> - -#if defined(CONFIG_CMD_DATE) - -/* - * Note: The acrobatics below is due to the hideously ingenius idea of - * the chip designers. As the chip does not allow register - * addressing, all values need to be read and written in one go. Sure - * enough, the 'wday' field (0-6) is transferred using the economic - * number of 4 bits right in the middle of the packet..... - */ - -int rtc_get(struct rtc_time *tm) -{ - int rel = 0; - uchar buffer[7]; - - memset(buffer, 0, 7); - - /* Read 52 bits into our buffer */ - tws_read(buffer, 52); - - tm->tm_sec = bcd2bin( buffer[0] & 0x7F); - tm->tm_min = bcd2bin( buffer[1] & 0x7F); - tm->tm_hour = bcd2bin( buffer[2] & 0x3F); - tm->tm_wday = bcd2bin( buffer[3] & 0x07); - tm->tm_mday = bcd2bin((buffer[3] & 0xF0) >> 4 | (buffer[4] & 0x0F) << 4); - tm->tm_mon = bcd2bin((buffer[4] & 0x30) >> 4 | (buffer[5] & 0x0F) << 4); - tm->tm_year = bcd2bin((buffer[5] & 0xF0) >> 4 | (buffer[6] & 0x0F) << 4) + 2000; - tm->tm_yday = 0; - tm->tm_isdst = 0; - - if (tm->tm_sec & 0x80) { - puts("### Warning: RTC Low Voltage - date/time not reliable\n"); - rel = -1; - } - - debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, - tm->tm_hour, tm->tm_min, tm->tm_sec); - - return rel; -} - -int rtc_set(struct rtc_time *tm) -{ - uchar buffer[7]; - uchar tmp; - - debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, - tm->tm_hour, tm->tm_min, tm->tm_sec); - - memset(buffer, 0, 7); - buffer[0] = bin2bcd(tm->tm_sec); - buffer[1] = bin2bcd(tm->tm_min); - buffer[2] = bin2bcd(tm->tm_hour); - buffer[3] = bin2bcd(tm->tm_wday); - tmp = bin2bcd(tm->tm_mday); - buffer[3] |= (tmp & 0x0F) << 4; - buffer[4] = (tmp & 0xF0) >> 4; - tmp = bin2bcd(tm->tm_mon); - buffer[4] |= (tmp & 0x0F) << 4; - buffer[5] = (tmp & 0xF0) >> 4; - tmp = bin2bcd(tm->tm_year % 100); - buffer[5] |= (tmp & 0x0F) << 4; - buffer[6] = (tmp & 0xF0) >> 4; - - /* Write the resulting 52 bits to device */ - tws_write(buffer, 52); - - return 0; -} - -void rtc_reset(void) -{ - struct rtc_time tmp; - - tmp.tm_sec = 0; - tmp.tm_min = 0; - tmp.tm_hour = 0; - tmp.tm_wday = 4; - tmp.tm_mday = 1; - tmp.tm_mon = 1; - tmp.tm_year = 2000; - rtc_set(&tmp); -} - -#endif diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index e038523..17e7dfe 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -74,4 +74,16 @@ config ARC_TIMER usually at least one of them exists. Either of them is supported in U-Boot. +config AG101P_TIMER + bool "AG101P timer support" + depends on TIMER && NDS32 + help + Select this to enable a timer for AG01P devices. + +config AE3XX_TIMER + bool "AE3XX timer support" + depends on TIMER && NDS32 + help + Select this to enable a timer for AE3XX devices. + endmenu diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile index bfe65fc..ced7bd6 100644 --- a/drivers/timer/Makefile +++ b/drivers/timer/Makefile @@ -12,3 +12,5 @@ obj-$(CONFIG_OMAP_TIMER) += omap-timer.o obj-$(CONFIG_AST_TIMER) += ast_timer.o obj-$(CONFIG_STI_TIMER) += sti-timer.o obj-$(CONFIG_ARC_TIMER) += arc_timer.o +obj-$(CONFIG_AG101P_TIMER) += ag101p_timer.o +obj-$(CONFIG_AE3XX_TIMER) += ae3xx_timer.o diff --git a/drivers/timer/ae3xx_timer.c b/drivers/timer/ae3xx_timer.c new file mode 100644 index 0000000..7ccb3eb --- /dev/null +++ b/drivers/timer/ae3xx_timer.c @@ -0,0 +1,117 @@ +/* + * Andestech ATCPIT100 timer driver + * + * (C) Copyright 2016 + * Rick Chen, NDS32 Software Engineering, rick@andestech.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <timer.h> +#include <linux/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define REG32_TMR(x) (*(unsigned long *) ((plat->regs) + (x>>2))) + +/* + * Definition of register offsets + */ + +/* ID and Revision Register */ +#define ID_REV 0x0 + +/* Configuration Register */ +#define CFG 0x10 + +/* Interrupt Enable Register */ +#define INT_EN 0x14 +#define CH_INT_EN(c , i) ((1<<i)<<(4*c)) + +/* Interrupt Status Register */ +#define INT_STA 0x18 +#define CH_INT_STA(c , i) ((1<<i)<<(4*c)) + +/* Channel Enable Register */ +#define CH_EN 0x1C +#define CH_TMR_EN(c , t) ((1<<t)<<(4*c)) + +/* Ch n Control REgister */ +#define CH_CTL(n) (0x20+0x10*n) +/* Channel clock source , bit 3 , 0:External clock , 1:APB clock */ +#define APB_CLK (1<<3) +/* Channel mode , bit 0~2 */ +#define TMR_32 1 +#define TMR_16 2 +#define TMR_8 3 +#define PWM 4 + +#define CH_REL(n) (0x24+0x10*n) +#define CH_CNT(n) (0x28+0x10*n) + +struct atctmr_timer_regs { + u32 id_rev; /* 0x00 */ + u32 reservd[3]; /* 0x04 ~ 0x0c */ + u32 cfg; /* 0x10 */ + u32 int_en; /* 0x14 */ + u32 int_st; /* 0x18 */ + u32 ch_en; /* 0x1c */ + u32 ch0_ctrl; /* 0x20 */ + u32 ch0_reload; /* 0x24 */ + u32 ch0_cntr; /* 0x28 */ + u32 reservd1; /* 0x2c */ + u32 ch1_ctrl; /* 0x30 */ + u32 ch1_reload; /* 0x34 */ + u32 int_mask; /* 0x38 */ +}; + +struct atftmr_timer_platdata { + unsigned long *regs; +}; + +static int atftmr_timer_get_count(struct udevice *dev, u64 *count) +{ + struct atftmr_timer_platdata *plat = dev->platdata; + u32 val; + val = ~(REG32_TMR(CH_CNT(1))+0xffffffff); + *count = timer_conv_64(val); + return 0; +} + +static int atctmr_timer_probe(struct udevice *dev) +{ + struct atftmr_timer_platdata *plat = dev->platdata; + REG32_TMR(CH_REL(1)) = 0xffffffff; + REG32_TMR(CH_CTL(1)) = APB_CLK|TMR_32; + REG32_TMR(CH_EN) |= CH_TMR_EN(1 , 0); + return 0; +} + +static int atctme_timer_ofdata_to_platdata(struct udevice *dev) +{ + struct atftmr_timer_platdata *plat = dev_get_platdata(dev); + plat->regs = map_physmem(dev_get_addr(dev) , 0x100 , MAP_NOCACHE); + return 0; +} + +static const struct timer_ops ag101p_timer_ops = { + .get_count = atftmr_timer_get_count, +}; + +static const struct udevice_id ag101p_timer_ids[] = { + { .compatible = "andestech,atcpit100" }, + {} +}; + +U_BOOT_DRIVER(altera_timer) = { + .name = "ae3xx_timer", + .id = UCLASS_TIMER, + .of_match = ag101p_timer_ids, + .ofdata_to_platdata = atctme_timer_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct atftmr_timer_platdata), + .probe = atctmr_timer_probe, + .ops = &ag101p_timer_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/timer/ag101p_timer.c b/drivers/timer/ag101p_timer.c new file mode 100644 index 0000000..163402f --- /dev/null +++ b/drivers/timer/ag101p_timer.c @@ -0,0 +1,122 @@ +/* + * Andestech ATFTMR010 timer driver + * + * (C) Copyright 2016 + * Rick Chen, NDS32 Software Engineering, rick@andestech.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <timer.h> +#include <linux/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Timer Control Register + */ +#define T3_UPDOWN (1 << 11) +#define T2_UPDOWN (1 << 10) +#define T1_UPDOWN (1 << 9) +#define T3_OFENABLE (1 << 8) +#define T3_CLOCK (1 << 7) +#define T3_ENABLE (1 << 6) +#define T2_OFENABLE (1 << 5) +#define T2_CLOCK (1 << 4) +#define T2_ENABLE (1 << 3) +#define T1_OFENABLE (1 << 2) +#define T1_CLOCK (1 << 1) +#define T1_ENABLE (1 << 0) + +/* + * Timer Interrupt State & Mask Registers + */ +#define T3_OVERFLOW (1 << 8) +#define T3_MATCH2 (1 << 7) +#define T3_MATCH1 (1 << 6) +#define T2_OVERFLOW (1 << 5) +#define T2_MATCH2 (1 << 4) +#define T2_MATCH1 (1 << 3) +#define T1_OVERFLOW (1 << 2) +#define T1_MATCH2 (1 << 1) +#define T1_MATCH1 (1 << 0) + +struct atftmr_timer_regs { + u32 t1_counter; /* 0x00 */ + u32 t1_load; /* 0x04 */ + u32 t1_match1; /* 0x08 */ + u32 t1_match2; /* 0x0c */ + u32 t2_counter; /* 0x10 */ + u32 t2_load; /* 0x14 */ + u32 t2_match1; /* 0x18 */ + u32 t2_match2; /* 0x1c */ + u32 t3_counter; /* 0x20 */ + u32 t3_load; /* 0x24 */ + u32 t3_match1; /* 0x28 */ + u32 t3_match2; /* 0x2c */ + u32 cr; /* 0x30 */ + u32 int_state; /* 0x34 */ + u32 int_mask; /* 0x38 */ +}; + +struct atftmr_timer_platdata { + struct atftmr_timer_regs *regs; +}; + +static int atftmr_timer_get_count(struct udevice *dev, u64 *count) +{ + struct atftmr_timer_platdata *plat = dev->platdata; + struct atftmr_timer_regs *const regs = plat->regs; + u32 val; + val = readl(®s->t3_counter); + *count = timer_conv_64(val); + return 0; +} + +static int atftmr_timer_probe(struct udevice *dev) +{ + struct atftmr_timer_platdata *plat = dev->platdata; + struct atftmr_timer_regs *const regs = plat->regs; + u32 cr; + writel(0, ®s->t3_load); + writel(0, ®s->t3_counter); + writel(TIMER_LOAD_VAL, ®s->t3_match1); + writel(TIMER_LOAD_VAL, ®s->t3_match2); + /* disable interrupts */ + writel(T3_MATCH1|T3_MATCH2|T3_OVERFLOW , ®s->int_mask); + cr = readl(®s->cr); + cr |= (T3_ENABLE|T3_UPDOWN); + writel(cr, ®s->cr); + return 0; +} + +static int atftme_timer_ofdata_to_platdata(struct udevice *dev) +{ + struct atftmr_timer_platdata *plat = dev_get_platdata(dev); + plat->regs = map_physmem(dev_get_addr(dev), + sizeof(struct atftmr_timer_regs), + MAP_NOCACHE); + return 0; +} + +static const struct timer_ops ag101p_timer_ops = { + .get_count = atftmr_timer_get_count, +}; + +static const struct udevice_id ag101p_timer_ids[] = { + { .compatible = "andestech,attmr010" }, + {} +}; + +U_BOOT_DRIVER(altera_timer) = { + .name = "ag101p_timer", + .id = UCLASS_TIMER, + .of_match = ag101p_timer_ids, + .ofdata_to_platdata = atftme_timer_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct atftmr_timer_platdata), + .probe = atftmr_timer_probe, + .ops = &ag101p_timer_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/twserial/Makefile b/drivers/twserial/Makefile deleted file mode 100644 index 7cc7c4d..0000000 --- a/drivers/twserial/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2009 -# Detlev Zundel, DENX Software Engineering, dzu@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-$(CONFIG_SOFT_TWS) += soft_tws.o diff --git a/drivers/twserial/soft_tws.c b/drivers/twserial/soft_tws.c deleted file mode 100644 index d0bf93d..0000000 --- a/drivers/twserial/soft_tws.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * (C) Copyright 2009 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define TWS_IMPLEMENTATION -#include <common.h> - -/*=====================================================================*/ -/* Public Functions */ -/*=====================================================================*/ - -/*----------------------------------------------------------------------- - * Read bits - */ -int tws_read(uchar *buffer, int len) -{ - int rem = len; - uchar accu, shift; - - debug("tws_read: buffer %p len %d\n", buffer, len); - - /* Configure the data pin for input */ - tws_data_config_output(0); - - /* Disable WR, i.e. setup a read */ - tws_wr(0); - udelay(1); - - /* Rise CE */ - tws_ce(1); - udelay(1); - - for (; rem > 0; ) { - for (shift = 0, accu = 0; - (rem > 0) && (shift < 8); - rem--, shift++) { - tws_clk(1); - udelay(10); - accu |= (tws_data_read() << shift); /* LSB first */ - tws_clk(0); - udelay(10); - } - *buffer++ = accu; - } - - /* Lower CE */ - tws_ce(0); - - return len - rem; -} - - -/*----------------------------------------------------------------------- - * Write bits - */ -int tws_write(uchar *buffer, int len) -{ - int rem = len; - uchar accu, shift; - - debug("tws_write: buffer %p len %d\n", buffer, len); - - /* Configure the data pin for output */ - tws_data_config_output(1); - - /* Enable WR, i.e. setup a write */ - tws_wr(1); - udelay(1); - - /* Rise CE */ - tws_ce(1); - udelay(1); - - for (; rem > 0; ) { - for (shift = 0, accu = *buffer++; - (rem > 0) && (shift < 8); - rem--, shift++) { - tws_data(accu & 0x01); /* LSB first */ - tws_clk(1); - udelay(10); - tws_clk(0); - udelay(10); - accu >>= 1; - } - } - - /* Lower CE */ - tws_ce(0); - - return len - rem; -} diff --git a/drivers/usb/eth/mcs7830.c b/drivers/usb/eth/mcs7830.c index 9d6cf8c..4abef5d 100644 --- a/drivers/usb/eth/mcs7830.c +++ b/drivers/usb/eth/mcs7830.c @@ -622,10 +622,12 @@ static int mcs7830_recv(struct eth_device *eth) int len; len = mcs7830_recv_common(ueth, buf); - if (len <= 0) + if (len >= 0) { net_process_received_packet(buf, len); + return 0; + } - return 0; + return len; } /* diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 9a67e43..b824eec 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -133,6 +133,14 @@ config USB_EHCI_MSM This driver supports combination of Chipidea USB controller and Synapsys USB PHY in host mode only. +config USB_EHCI_RCAR_GEN3 + bool "Support for Renesas RCar M3/H3 EHCI USB controller" + depends on RCAR_GEN3 + default y + ---help--- + Enables support for the on-chip EHCI controller on Renesas + R8A7795 and R8A7796 SoCs. + config USB_EHCI_ZYNQ bool "Support for Xilinx Zynq on-chip EHCI USB controller" depends on ARCH_ZYNQ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index bf354fe..4ece0a2 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o +obj-$(CONFIG_USB_EHCI_RCAR_GEN3) += ehci-rcar_gen3.o obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci diff --git a/drivers/usb/host/ehci-rcar_gen3.c b/drivers/usb/host/ehci-rcar_gen3.c new file mode 100644 index 0000000..525e7f3 --- /dev/null +++ b/drivers/usb/host/ehci-rcar_gen3.c @@ -0,0 +1,106 @@ +/* + * drivers/usb/host/ehci-rcar_gen3. + * This file is EHCI HCD (Host Controller Driver) for USB. + * + * Copyright (C) 2015-2017 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <wait_bit.h> +#include <asm/io.h> +#include <usb/ehci-ci.h> +#include "ehci.h" + +#define RCAR_GEN3_USB_BASE(n) (0xEE080000 + ((n) * 0x20000)) + +#define EHCI_USBCMD 0x120 + +#define CORE_SPD_RSM_TIMSET 0x30c +#define CORE_OC_TIMSET 0x310 + +/* Register offset */ +#define AHB_OFFSET 0x200 + +#define BASE_HSUSB 0xE6590000 +#define REG_LPSTS (BASE_HSUSB + 0x0102) /* 16bit */ +#define SUSPM 0x4000 +#define SUSPM_NORMAL BIT(14) +#define REG_UGCTRL2 (BASE_HSUSB + 0x0184) /* 32bit */ +#define USB0SEL 0x00000030 +#define USB0SEL_EHCI 0x00000010 + +#define SMSTPCR7 0xE615014C +#define SMSTPCR700 BIT(0) /* EHCI3 */ +#define SMSTPCR701 BIT(1) /* EHCI2 */ +#define SMSTPCR702 BIT(2) /* EHCI1 */ +#define SMSTPCR703 BIT(3) /* EHCI0 */ +#define SMSTPCR704 BIT(4) /* HSUSB */ + +#define AHB_PLL_RST BIT(1) + +#define USBH_INTBEN BIT(2) +#define USBH_INTAEN BIT(1) + +#define AHB_INT_ENABLE 0x200 +#define AHB_USBCTR 0x20c + +int ehci_hcd_stop(int index) +{ +#if defined(CONFIG_R8A7795) + const u32 mask = SMSTPCR703 | SMSTPCR702 | SMSTPCR701 | SMSTPCR700; +#else + const u32 mask = SMSTPCR703 | SMSTPCR702; +#endif + const u32 base = RCAR_GEN3_USB_BASE(index); + int ret; + + /* Reset EHCI */ + setbits_le32((uintptr_t)(base + EHCI_USBCMD), CMD_RESET); + ret = wait_for_bit("ehci-rcar", (void *)(uintptr_t)base + EHCI_USBCMD, + CMD_RESET, false, 10, true); + if (ret) { + printf("ehci-rcar: reset failed (index=%i, ret=%i).\n", + index, ret); + } + + setbits_le32(SMSTPCR7, BIT(3 - index)); + + if ((readl(SMSTPCR7) & mask) == mask) + setbits_le32(SMSTPCR7, SMSTPCR704); + + return 0; +} + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + const void __iomem *base = + (void __iomem *)(uintptr_t)RCAR_GEN3_USB_BASE(index); + struct usb_ehci *ehci = (struct usb_ehci *)(uintptr_t)base; + + clrbits_le32(SMSTPCR7, BIT(3 - index)); + clrbits_le32(SMSTPCR7, SMSTPCR704); + + *hccr = (struct ehci_hccr *)((uintptr_t)&ehci->caplength); + *hcor = (struct ehci_hcor *)((uintptr_t)*hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + /* Enable interrupt */ + setbits_le32(base + AHB_INT_ENABLE, USBH_INTBEN | USBH_INTAEN); + writel(0x014e029b, base + CORE_SPD_RSM_TIMSET); + writel(0x000209ab, base + CORE_OC_TIMSET); + + /* Choice USB0SEL */ + clrsetbits_le32(REG_UGCTRL2, USB0SEL, USB0SEL_EHCI); + + /* Clock & Reset */ + clrbits_le32(base + AHB_USBCTR, AHB_PLL_RST); + + /* low power status */ + clrsetbits_le16(REG_LPSTS, SUSPM, SUSPM_NORMAL); + + return 0; +} diff --git a/fs/Makefile b/fs/Makefile index 5c90656..5770f41 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_FS_CBFS) += cbfs/ obj-$(CONFIG_CMD_CRAMFS) += cramfs/ obj-$(CONFIG_FS_EXT4) += ext4/ obj-y += fat/ -obj-$(CONFIG_CMD_JFFS2) += jffs2/ +obj-$(CONFIG_FS_JFFS2) += jffs2/ obj-$(CONFIG_CMD_REISER) += reiserfs/ obj-$(CONFIG_SANDBOX) += sandbox/ obj-$(CONFIG_CMD_UBIFS) += ubifs/ diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 5654003..a71bad1 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -1250,7 +1250,7 @@ int file_fat_detectfs(void) return 1; } -#if defined(CONFIG_CMD_IDE) || \ +#if defined(CONFIG_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_SCSI) || \ defined(CONFIG_CMD_USB) || \ diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig index e69de29..1b9ecdd 100644 --- a/fs/jffs2/Kconfig +++ b/fs/jffs2/Kconfig @@ -0,0 +1,7 @@ +config FS_JFFS2 + bool "Enable JFFS2 filesystem support" + help + This provides support for reading images from JFFS2 (Journalling + Flash File System version 2). JFFS2 is a log-structured file system + for use with flash memory devices. It supports raw NAND devices, + hard links and compression. diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index bc0bc2b..b1f41ab 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -13,18 +13,6 @@ * Alphabetical list of all possible commands. */ -#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */ -#define CONFIG_CMD_EEPROM /* EEPROM read/write support */ -#define CONFIG_CMD_FDC /* Floppy Disk Support */ -#define CONFIG_CMD_FUSE /* Device fuse support */ -#define CONFIG_CMD_GETTIME /* Get time since boot */ -#define CONFIG_CMD_HASH /* calculate hash / digest */ -#define CONFIG_CMD_IDE /* IDE harddisk support */ -#define CONFIG_CMD_IMMAP /* IMMR dump support */ -#define CONFIG_CMD_IO /* Access to X86 IO space */ -#define CONFIG_CMD_IRQ /* irqinfo */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -#define CONFIG_CMD_KGDB /* kgdb */ #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ #define CONFIG_CMD_MTDPARTS /* mtd parts support */ #define CONFIG_CMD_NAND /* NAND support */ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 0e01e82..4b2c493 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -186,16 +186,16 @@ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI #endif -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide) #define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV #else #define BOOTENV_SHARED_IDE #define BOOTENV_DEV_IDE \ - BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE + BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE #define BOOTENV_DEV_NAME_IDE \ - BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE + BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE #endif #if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 7aa5b02..5a698a8 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -43,7 +43,7 @@ #endif /* Rather than repeat this expression each time, add a define for it */ -#if defined(CONFIG_CMD_IDE) || \ +#if defined(CONFIG_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_SCSI) || \ defined(CONFIG_CMD_USB) || \ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 2041b7b..2226aba 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -702,21 +702,12 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * USB */ diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 72dc8ba..59b2252 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -228,7 +228,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 /* I2C EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 @@ -294,8 +293,6 @@ extern unsigned long get_sdram_size(void); /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO /* @@ -328,12 +325,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 1b956fc..407e499 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -417,7 +417,6 @@ combinations. this should be removed later #define CONFIG_SYS_EEPROM_BUS_NUM 0 /* enable read and write access to EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 @@ -521,16 +520,8 @@ combinations. this should be removed later /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index f95c3b9..398d0e0 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -371,7 +371,6 @@ /* I2C EEPROM */ /* enable read and write access to EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 @@ -437,16 +436,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index c3b2353..6d2919f 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -46,8 +46,6 @@ * Command line configuration. */ #define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_EEPROM #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index deb6f82..ab4b060 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -61,9 +61,6 @@ * Command line configuration. */ #define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_EEPROM #define CONFIG_SUPPORT_VFAT diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 3f7c1c9..fc9b26f 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -36,7 +36,6 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO #define CONFIG_HOSTNAME M52277EVB diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index b1a49b0..3efd7e5 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -37,9 +37,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE /* ATA */ # define CONFIG_IDE_RESET 1 # define CONFIG_IDE_PREINIT 1 diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 380221e..4f7a19b 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -46,7 +46,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE /* ATA */ #define CONFIG_IDE_RESET 1 diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 7b162cc..f4d970d 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -37,7 +37,6 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_NAND #define CONFIG_CMD_REGINFO @@ -60,7 +59,7 @@ #define CONFIG_MII_INIT 1 #define CONFIG_SYS_DISCOVER_PHY #define CONFIG_SYS_RX_ETH_BUFFER 2 -#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN #define CONFIG_SYS_TX_ETH_BUFFER 2 #define CONFIG_HAS_ETH1 diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 553e877..7d6edda 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -36,7 +36,6 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#undef CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO /* Network configuration */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 806f005..39ba940 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -36,8 +36,6 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #undef CONFIG_CMD_PCI #define CONFIG_CMD_REGINFO diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 30db7ed..b13809f 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -46,10 +46,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PCI #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SAVES diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index d782fc3..ea99aea 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -320,7 +320,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 6d35d70..46f09d6 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -478,7 +478,6 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_SDRAM #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ @@ -486,10 +485,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SUPPORT_VFAT #endif -#ifdef CONFIG_COMPACT_FLASH - #define CONFIG_CMD_IDE -#endif - #ifdef CONFIG_SATA_SIL3114 #define CONFIG_CMD_SATA #endif diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8375ead..18b6b4e 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -589,8 +589,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index c5d5815..0f96ac0 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -315,7 +315,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 4509a6d..029aa57 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -342,7 +342,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index b186e01..9b2f836 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -348,7 +348,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index df50fa3..43e0551 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -461,7 +461,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 67093df..96a125c 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -340,7 +340,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 8170b9f..8d026ad 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -354,7 +354,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 0bc71d4..618d537 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -355,7 +355,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 81d2d4f..eb7db20 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -448,7 +448,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 2c1be22..79e11bb 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -547,8 +547,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 867004f..220b070 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -589,7 +589,6 @@ extern unsigned long get_sdram_size(void); #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ #endif /* enable read and write access to EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 @@ -725,8 +724,6 @@ extern unsigned long get_sdram_size(void); /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -735,12 +732,6 @@ extern unsigned long get_sdram_size(void); || defined(CONFIG_FSL_SATA) #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 0763cf3..3d12c84 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -593,8 +593,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 8821be3..719043d 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -241,7 +241,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 7629fe8..b008e3d 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -580,8 +580,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #ifdef CONFIG_PCI #define CONFIG_CMD_PCI @@ -604,12 +602,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/PATI.h b/include/configs/PATI.h index e53db24..1f26ac4 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -38,8 +38,6 @@ */ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IRQ #define CONFIG_BOOTCOMMAND "" /* autoboot command */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 6c74b00..393a02d 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -37,12 +37,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE #define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_FDC #define CONFIG_SCSI #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SAVES diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 4bb07d8..78ce91d 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -55,10 +55,7 @@ * Command line configuration. */ #define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_IDE #define CONFIG_CMD_NAND -#define CONFIG_CMD_EEPROM #define CONFIG_SUPPORT_VFAT diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index d889306..a94e790 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -48,8 +48,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IRQ #define CONFIG_CMD_PCI #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index b9599b5..54a1a25 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -163,26 +163,6 @@ #define CONFIG_SYS_EEPROM_WREN 1 #define CONFIG_SYS_I2C_BOOT_EEPROM_ADDR 0x52 -/* - * standard dtt sensor configuration - bottom bit will determine local or - * remote sensor of the TMP401 - */ -#define CONFIG_DTT_SENSORS { 0, 1 } - -/* - * The PMC440 uses a TI TMP401 temperature sensor. This part - * is basically compatible to the ADM1021 that is supported - * by U-Boot. - * - * - i2c addr 0x4c - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT ouput disabled - * - local temp sensor enabled, min set to 0 deg, max set to 70 deg - * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg - */ -#define CONFIG_DTT_ADM1021 -#define CONFIG_SYS_DTT_ADM1021 { { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} } - #define CONFIG_PREBOOT "echo Add \\\"run fpga\\\" and " \ "\\\"painit\\\" to preboot command" @@ -258,8 +238,6 @@ /* Partitions */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_REGINFO diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 42e692c..2209cfd 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -779,9 +779,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -865,12 +862,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #include <asm/fsl_secure_boot.h> #endif /* __T1024QDS_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index c2175bd..025e7de 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -789,9 +789,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -884,12 +881,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #include <asm/fsl_secure_boot.h> #endif /* __T1024RDB_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 2565887..3953145 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -629,7 +629,6 @@ unsigned long get_board_ddr_clk(void); /* Enable VSC9953 L2 Switch driver */ #define CONFIG_VSC9953 -#define CONFIG_CMD_ETHSW #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 @@ -659,21 +658,12 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index d2ece40..0035e67 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -748,7 +748,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg /* Enable VSC9953 L2 Switch driver on T1040 SoC */ #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) #define CONFIG_VSC9953 -#define CONFIG_CMD_ETHSW #ifdef CONFIG_TARGET_T1040RDB #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 @@ -772,20 +771,12 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 02fd37d..e792ec5 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -744,20 +744,12 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index faa1111..fdafeeb 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -690,19 +690,12 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI #define CONFIG_CMD_PCI #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 5d030d1..dc3ebfa 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -498,12 +498,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * USB */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 8ebfde1..0d9cdfb 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -272,8 +272,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #ifdef CONFIG_PCI #define CONFIG_CMD_PCI @@ -696,12 +694,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #define __USB_PHY_TYPE utmi diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 19e0b1b..e1f0445 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -143,7 +143,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -153,7 +152,6 @@ #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) - #define CONFIG_CMD_IDE #endif #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index f56bd23..74636b9 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -91,8 +91,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index ed08d97..6b345c4 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -89,8 +89,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index e3c2cca..a79dabe 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -184,13 +184,6 @@ #define CONFIG_RTC_DS1337 /* use ds1337 rtc via i2c */ #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ -/* I2C SYSMON (LM75) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - /* * TSEC */ @@ -280,9 +273,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index c2b35fd..b4ed561 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -84,8 +84,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 76b52ab..1dc1329 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -84,8 +84,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 10ba21d..b4c3a79 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -86,8 +86,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 7cfc351..14b76a6 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -115,9 +115,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 7569cd1..f55fe56 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -86,8 +86,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index d2cb4b9..52c4d68 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -86,8 +86,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 03ad2e6..06981c9 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -89,8 +89,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 485bd6c..3f87d8a 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -89,8 +89,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 2906fcf..975f4b7 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -129,9 +129,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_NETCONSOLE diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index eaf0741..184cb62 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -125,8 +125,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IDE /* * Miscellaneous configurable options diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index cd46db4..b2feccf 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -129,27 +129,6 @@ #define CONFIG_HWCONFIG -#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ -#define CONFIG_SYS_DTT_BUS_NUM 1 /* The I2C bus for DTT */ -#define CONFIG_DTT_SENSORS { 0, 1 } /* Sensor index */ -/* - * ADM1021/NCT72 temp sensor configuration (see dtt/adm1021.c for details). - * there will be one entry in this array for each two (dummy) sensors in - * CONFIG_DTT_SENSORS. - * - * For uCP1020 module: - * - only one ADM1021/NCT72 - * - i2c addr 0x41 - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT output disabled - * - local temp sensor enabled, min set to 0 deg, max set to 85 deg - * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg - */ -#define CONFIG_SYS_DTT_ADM1021 { { CONFIG_SYS_I2C_NCT72_ADDR, \ - 0x02, 0, 1, 0, 85, 1, 0, 85} } - -#define CONFIG_CMD_DTT - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -442,10 +421,7 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_ERRATA /* * USB diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index fbadcd1..a180b38 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -53,8 +53,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_EEPROM #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 07f74db..82b9ff4 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -388,7 +388,6 @@ * SPL related defines */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_TEXT_BASE 0xfc000000 /* Place BSS for SPL near end of SDRAM */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 2ea43ff..6a26269 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -81,7 +81,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index 2a46e9b..4eb8f39 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -367,9 +367,6 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#undef CONFIG_CMD_FUSE -#undef CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 9f35e71..0be310d 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -124,14 +124,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - /*----------------------------------------------------------------------- * Ethernet *----------------------------------------------------------------------*/ @@ -160,7 +152,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT #define CONFIG_CMD_NAND /*----------------------------------------------------------------------- diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h new file mode 100644 index 0000000..edc742d --- /dev/null +++ b/include/configs/adp-ae3xx.h @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch-ae3xx/ae3xx.h> + +/* + * CPU and Board Configuration Options + */ +#define CONFIG_USE_INTERRUPT + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_SKIP_TRUNOFF_WATCHDOG + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_PANIC_HANG + +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_SERVERIP + +#ifdef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x00500000 +#ifdef CONFIG_OF_CONTROL +#undef CONFIG_OF_SEPARATE +#define CONFIG_OF_EMBED +#endif +#else + +#define CONFIG_SYS_TEXT_BASE 0x80000000 +#endif + +/* + * Timer + */ +#define CONFIG_SYS_CLK_FREQ 39062500 +#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ + +/* + * Use Externel CLOCK or PCLK + */ +#undef CONFIG_FTRTC010_EXTCLK + +#ifndef CONFIG_FTRTC010_EXTCLK +#define CONFIG_FTRTC010_PCLK +#endif + +#ifdef CONFIG_FTRTC010_EXTCLK +#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ +#else +#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ +#endif + +#define TIMER_LOAD_VAL 0xffffffff + +/* + * Real Time Clock + */ +#define CONFIG_RTC_FTRTC010 + +/* + * Real Time Clock Divider + * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) + */ +#define OSC_5MHZ (5*1000000) +#define OSC_CLK (4*OSC_5MHZ) +#define RTC_DIV_COUNT (0.5) /* Why?? */ + +/* + * Serial console configuration + */ + +/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE +#ifndef CONFIG_DM_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#endif +#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ + +/* + * Ethernet + */ +#define CONFIG_FTMAC100 + +/* + * SD (MMC) controller + */ +#define CONFIG_FTSDC010 +#define CONFIG_FTSDC010_NUMBER 1 +#define CONFIG_FTSDC010_SDIO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * Size of malloc() pool + */ +/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ +#define CONFIG_SYS_MALLOC_LEN (512 << 10) + +/* + * Physical Memory Map + */ +#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ + +#define PHYS_SDRAM_1 \ + (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ + +#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ + +#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ +#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ + GENERATED_GBL_DATA_SIZE) + +/* + * Load address and memory test area should agree with + * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. + */ +#define CONFIG_SYS_LOAD_ADDR 0x300000 + +/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) + +/* + * Static memory controller configuration + */ +#define CONFIG_FTSMC020 + +#ifdef CONFIG_FTSMC020 +#include <faraday/ftsmc020.h> + +#define CONFIG_SYS_FTSMC020_CONFIGS { \ + { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ + { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ +#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ + FTSMC020_TPR_AST(1) | \ + FTSMC020_TPR_CTW(1) | \ + FTSMC020_TPR_ATI(1) | \ + FTSMC020_TPR_AT2(1) | \ + FTSMC020_TPR_WTC(1) | \ + FTSMC020_TPR_AHT(1) | \ + FTSMC020_TPR_TRNA(1)) +#endif + +/* + * FLASH on ADP_AG101P is connected to BANK0 + * Just disalbe the other BANK to avoid detection error. + */ +#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define FTSMC020_BANK1_CONFIG (0x00) +#define FTSMC020_BANK1_TIMING (0x00) +#endif /* CONFIG_FTSMC020 */ + +/* + * FLASH and environment organization + */ +/* use CFI framework */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER + +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL + +/* support JEDEC */ +#ifdef CONFIG_CFI_FLASH +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 +#endif + +/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ +#define PHYS_FLASH_1 0x88000000 /* BANK 0 */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ + +/* max number of memory banks */ +/* + * There are 4 banks supported for this Controller, + * but we have only 1 bank connected to flash on board + */ +#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#endif +#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} + +/* max number of sectors on one chip */ +#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) +#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +/* environments */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) +#define CONFIG_ENV_SIZE 8192 +#define CONFIG_ENV_OVERWRITE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ + +/* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) +/* Increase max gunzip size */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) + +#endif /* __CONFIG_H */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index b42fcfa..bc122d3 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -20,14 +20,13 @@ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_GENERIC_GLOBAL_DATA +#define CONFIG_CMDLINE_EDITING -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG /* send initrd params */ +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_SERVERIP #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_MEM_REMAP @@ -35,6 +34,10 @@ #ifdef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0x00500000 +#ifdef CONFIG_OF_CONTROL +#undef CONFIG_OF_SEPARATE +#define CONFIG_OF_EMBED +#endif #else #ifdef CONFIG_MEM_REMAP #define CONFIG_SYS_TEXT_BASE 0x80000000 @@ -87,7 +90,9 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 +#endif #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ /* @@ -95,7 +100,6 @@ */ #define CONFIG_FTMAC100 - /* * SD (MMC) controller */ @@ -348,7 +352,9 @@ * There are 4 banks supported for this Controller, * but we have only 1 bank connected to flash on board */ +#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT #define CONFIG_SYS_MAX_FLASH_BANKS 1 +#endif #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} /* max number of sectors on one chip */ @@ -362,4 +368,15 @@ #define CONFIG_ENV_SIZE 8192 #define CONFIG_ENV_OVERWRITE +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ + +/* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) +/* Increase max gunzip size */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) + #endif /* __CONFIG_H */ diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index b76f376..f320792 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -36,7 +36,6 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP /* SATA Configs */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index b6b14d3..0c6d288 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -176,7 +176,6 @@ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h index 6855f62..2c4033c 100644 --- a/include/configs/am335x_sl50.h +++ b/include/configs/am335x_sl50.h @@ -64,7 +64,6 @@ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 5de39cf..eb768b9 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -101,7 +101,6 @@ #endif /* CONFIG_USB_AM35X */ /* commands to include */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_NAND /* NAND support */ @@ -250,7 +249,6 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index feb7b6e..829dd3ec 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -300,7 +300,6 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200000 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 1feb946..25f63e8 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -23,7 +23,6 @@ #endif /* I2C Configuration */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 6962039..b379e08 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -31,6 +31,10 @@ #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + #define CONFIG_SYS_OMAP_ABE_SYSCK /* Define the default GPT table for eMMC */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 0140664..450a2eb 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -51,8 +51,6 @@ */ #if defined(CONFIG_440) #endif -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/ap121.h b/include/configs/ap121.h index 8ae3c77..2284b8b 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -33,7 +33,6 @@ #define CONFIG_BOOTCOMMAND "sf probe;" \ "mtdparts default;" \ "bootm 0x9f650000" -#define CONFIG_LZMA #define MTDIDS_DEFAULT "nor0=spi-flash.0" #define MTDPARTS_DEFAULT "mtdparts=spi-flash.0:" \ diff --git a/include/configs/ap143.h b/include/configs/ap143.h index a2c31a2..295078309 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -37,7 +37,6 @@ #define CONFIG_BOOTCOMMAND "sf probe;" \ "mtdparts default;" \ "bootm 0x9f680000" -#define CONFIG_LZMA #define MTDIDS_DEFAULT "nor0=spi-flash.0" #define MTDPARTS_DEFAULT "mtdparts=spi-flash.0:" \ diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 1cd4d32..b3c22cf 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -14,7 +14,6 @@ #define CONFIG_AP325RXA 1 #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_IDE #define CONFIG_BOOTARGS "console=ttySC2,38400" diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index d3d72b6..440505d 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8BFC0000 #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV #define CONFIG_BOOTARGS "console=ttySC4,115200" diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index c1c0f59..9220d04 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* OCOTP Configs */ -#define CONFIG_CMD_FUSE #ifdef CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #endif @@ -134,7 +133,6 @@ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IPUV3_CLK 260000000 -#define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 40a82b8..073f3b4 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -54,8 +54,6 @@ /* * U-Boot Commands */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IMX_FUSE /* imx iim fuse */ #define CONFIG_CMD_MTDPARTS /* MTD partition support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK diff --git a/include/configs/aria.h b/include/configs/aria.h index 4d946fc..0a7ef99 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -372,9 +372,6 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#undef CONFIG_CMD_FUSE -#undef CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 8899579..61989d6 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -59,11 +59,7 @@ /* Define which commands should be available at u-boot command prompt */ -#if ENABLE_JFFS -#define CONFIG_CMD_JFFS2 -#endif #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMDLINE_EDITING #define CONFIG_MCFRTC diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e7b9ad2..411d741 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -197,7 +197,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #define CONFIG_SYS_MASTER_CLOCK 132096000 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index a5489cd..33cc5fc 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -191,7 +191,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #define CONFIG_SYS_MASTER_CLOCK 132096000 diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 4c27225..bf13d93 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -74,7 +74,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_JFFS2 #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 64d7c45..a7f5e06 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -93,7 +93,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_JFFS2 #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 3c03ed3..c8e9340 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -95,7 +95,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_JFFS2 #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/baltos.h b/include/configs/baltos.h index c65eeed..fe4ac05 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -229,7 +229,6 @@ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 924a351..71b1b96 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -330,7 +330,6 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index d9b88fa..957cd9e 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -67,10 +67,7 @@ #define CONFIG_FAT_WRITE /* SHA hashing */ -#define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY -#define CONFIG_SHA1 -#define CONFIG_SHA256 /* Enable Time Command */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 7aad7ea..7907310 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -105,7 +105,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN /* General parts of the framework, required. */ -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* ! __BUR_AM335X_COMMON_H__ */ diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 6e2fd33..f5d108e 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -299,7 +299,6 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #ifndef CONFIG_DRIVER_TI_EMAC diff --git a/include/configs/canmb.h b/include/configs/canmb.h index c70979e..b7c74b4 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -46,7 +46,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IMMAP #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index a330372..b495d06 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -261,18 +261,6 @@ #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -#if defined(CONFIG_ARCHES) -#define CONFIG_SYS_I2C_DTT_ADDR 0x4a /* AD7414 I2C address */ -#endif - #if !defined(CONFIG_ARCHES) /* RTC configuration */ #define CONFIG_RTC_M41T62 @@ -373,17 +361,14 @@ * Commands additional to the ones defined in amcc-common.h */ #if defined(CONFIG_ARCHES) -#define CONFIG_CMD_DTT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM #elif defined(CONFIG_CANYONLANDS) -#define CONFIG_CMD_DTT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SATA #define CONFIG_CMD_SDRAM #elif defined(CONFIG_GLACIER) -#define CONFIG_CMD_DTT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h index 3000453..96e5c9c 100644 --- a/include/configs/cl-som-am57x.h +++ b/include/configs/cl-som-am57x.h @@ -60,8 +60,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_I2C_EEPROM_BUS 3 -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EEPROM_LAYOUT #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_EEPROM_SIZE 256 diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 0c51d2a..3397aaf 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -24,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_PCI /* I2C */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 3a7d826..3777a0d 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -21,7 +21,6 @@ /* * Supported commands */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index f5f3df3..dd8010c 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -258,14 +258,10 @@ #define CONFIG_VIDEO_BMP_LOGO /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3" - #endif /* __CONFIG_CM_FX6_H */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 9a8e130..3fb9dae 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -153,16 +153,12 @@ /* Status LED polarity is inversed, so init it in the "off" state */ /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3" - #ifndef CONFIG_SPL_BUILD /* * Enable PCA9555 at I2C0-0x26. diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 1898e38..ee7c9de 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -262,7 +262,6 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC @@ -306,14 +305,10 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3" - #endif /* __CONFIG_H */ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 0df7d42..dd78b0c 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -257,14 +257,10 @@ #define CONFIG_OMAP3_SPI /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3" - #endif /* __CONFIG_H */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 4f44a67..1e63098 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -150,14 +150,10 @@ #define CONFIG_SPL_SPI_LOAD /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3" - #endif /* __CONFIG_CM_T43_H */ diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index ccaa568..14042ad 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -67,16 +67,12 @@ /* Enabled commands */ /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3" - /* USB Networking options */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 9c40852..0882ef8 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -52,7 +52,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* OCOTP Configs */ -#define CONFIG_CMD_FUSE #ifdef CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #endif @@ -115,7 +114,6 @@ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IPUV3_CLK 260000000 -#define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 62a404a..5879639 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -51,7 +51,6 @@ /* * Bootloader Components Configuration */ -#define CONFIG_CMD_ENV /* I2C support */ #ifdef CONFIG_SYS_I2C diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 28383f4..6e8cd91 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -20,7 +20,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_CMD_FUSE #ifdef CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #endif diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 7535ad5..6641408 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -185,7 +185,6 @@ #define CONFIG_PCA9698 /* NXP PCA9698 */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 @@ -199,8 +198,6 @@ #define CONFIG_SF_DEFAULT_MODE 0 #endif -#define CONFIG_SHA1 - /* * MMC */ @@ -344,8 +341,6 @@ #ifndef CONFIG_TRAILBLAZER -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index add5f90..a04af31 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -17,7 +17,6 @@ #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_BOARD_LATE_INIT #define CONFIG_LAST_STAGE_INIT -#define CONFIG_SPL_BOARD_INIT /* * TEXT_BASE needs to be below 16MiB, since this area is scrubbed @@ -33,7 +32,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_I2C #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 7e606cd..7bbe31c 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -593,8 +593,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI @@ -618,12 +616,6 @@ #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT #endif -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 71b428f..3847a19 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -148,7 +148,6 @@ #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index 4359297..a23da19 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -411,8 +411,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #ifdef CONFIG_PCI diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 9442c05..e0bbf94 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -273,7 +273,6 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI @@ -302,13 +301,11 @@ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV #endif #ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 6e2561c..699c03f 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -23,7 +23,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index 1cdefa0..0f0ab01 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -24,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_PCI /* SPI NOR flash default params, used by sf commands */ diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 676dfc9..0890a4d 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -24,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_PCI #define CONFIG_SCSI diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index fc8a3ec..821aa9d 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -25,7 +25,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SATA diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index e788f9c..9db3380 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -69,13 +69,7 @@ #ifdef CONFIG_DBAU1550 -#undef CONFIG_CMD_IDE #undef CONFIG_CMD_PCMCIA - -#else - -#define CONFIG_CMD_IDE - #endif /* diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 6e95064..a8b6802 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -110,7 +110,6 @@ #define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE #define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND /* @@ -181,7 +180,6 @@ /* SPL will use SRAM as stack */ #define CONFIG_SPL_STACK 0x0000FFF8 -#define CONFIG_SPL_BOARD_INIT /* Use the framework and generic lib */ #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5884d5c..c892b5f 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -91,7 +91,6 @@ /* partition */ /* commands to include */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ #undef CONFIG_SUPPORT_RAW_INITRD diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index ab546c5..6710507 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -85,8 +85,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IRQ #define CONFIG_CMD_PCI #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SAVES diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index e32651f..59ba0af 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -31,9 +31,6 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66 #define PLLMR1_DEFAULT PLLMR1_266_133_66 -/* new uImage format support */ -#define CONFIG_FIT_DISABLE_SHA256 - #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ /* @@ -57,9 +54,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IRQ /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) @@ -111,13 +105,6 @@ #define CONFIG_SYS_SPD_BUS_NUM 4 /* Temp sensor/hwmon/dtt */ -#define CONFIG_SYS_DTT_BUS_NUM 4 -#define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */ -#define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\ - { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } -#define CONFIG_DTT_TACH_LIMIT 0xa10 #define CONFIG_SYS_ICS8N3QV01_I2C {1, 3} #define CONFIG_SYS_SIL1178_I2C {0, 2} diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 2b7d62b..11397bd 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -29,9 +29,6 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66_33 #define PLLMR1_DEFAULT PLLMR1_266_133_66_33 -/* new uImage format support */ -#define CONFIG_FIT_DISABLE_SHA256 - #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ /* @@ -55,9 +52,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IRQ /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 9450b62..470e262 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -28,9 +28,7 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND -#define CONFIG_CMD_IDE #define CONFIG_SYS_MVFS #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 69429ed..3b56fd6 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -23,7 +23,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND /* * mv-common.h should be defined after CMD configs since it used them @@ -80,7 +79,6 @@ /* * File system */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index a9ca023..17608a5 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -41,6 +41,10 @@ #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + #define CONFIG_SYS_OMAP_ABE_SYSCK #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index b97c6c4..11c842d 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -46,7 +46,6 @@ #define CONFIG_USB_ETHER_SMSC95XX /* Extra Commands */ -#define CONFIG_CMD_ENV /* Enable that for switching of boot partitions */ /* Disabled by default as some sub-commands can brick eMMC */ /*#define CONFIG_SUPPORT_EMMC_BOOT */ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 2c83a71..aaba5d8 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -23,7 +23,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 3a5b5c7..53ee1ad 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -128,7 +128,6 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI @@ -169,7 +168,6 @@ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV #endif /* additions for new relocation code, must added to all boards */ diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index f8fb97b..2404441 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -29,7 +29,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 2fc8598..def28f2 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ /* Monitor configuration */ -#define CONFIG_CMD_JFFS2 #define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index d1c7b93..cc5cc7b 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -25,7 +25,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x00040000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/orion5x/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_UBOOT_BASE 0xfff90000 #define CONFIG_SYS_UBOOT_START 0x00800000 #define CONFIG_SYS_TEXT_BASE 0x00800000 @@ -120,7 +119,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_IDE /* * Network @@ -141,7 +139,7 @@ /* * IDE */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT /* ED Mini V has an IDE-compatible SATA connector for port 1 */ diff --git a/include/configs/espt.h b/include/configs/espt.h index ace7186..845bcc1 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -18,7 +18,6 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 481051c..e7f7a7c 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -84,7 +84,6 @@ #define CONFIG_AT91_GPIO /* Command line configuration */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 5411e5f..6915dc1 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -26,7 +26,6 @@ /* Enable ACE acceleration for SHA1 and SHA256 */ #define CONFIG_EXYNOS_ACE_SHA -#define CONFIG_SHA_HW_ACCEL /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD @@ -42,12 +41,8 @@ /* select serial console configuration */ #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 -#define CONFIG_CMD_HASH - /* Thermal Management Unit */ #define CONFIG_EXYNOS_TMU -#define CONFIG_CMD_DTT -#define CONFIG_TMU_CMD_DTT /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 @@ -137,10 +132,7 @@ #endif /*CONFIG_CMD_NET*/ /* SHA hashing */ -#define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY -#define CONFIG_SHA1 -#define CONFIG_SHA256 /* Enable Time Command */ diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index fee46ad..7e03dd6 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -147,7 +147,6 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_PCI -#undef CONFIG_CMD_EEPROM /* * PCI stuff diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 198259b..f60a029 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -47,7 +47,6 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP /* SATA Configs */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index f9bced3..d1635b0 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -43,9 +43,7 @@ * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND -#define CONFIG_CMD_IDE #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ /* diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index abc4214..83b7890 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -86,7 +86,6 @@ * Command line configuration. */ /* add useful commands */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO #define CONFIG_AUTO_COMPLETE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 1c18a380..2227eea 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -8,7 +8,6 @@ #define __CONFIG_H /* SPL */ -#define CONFIG_SPL_BOARD_INIT /* Location in NAND to read U-Boot from */ #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M) @@ -141,9 +140,6 @@ #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ -#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */ -#define CONFIG_CMD_GSC -#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */ #define CONFIG_CMD_UNZIP /* gzwrite */ #define CONFIG_RBTREE @@ -176,7 +172,6 @@ #define CONFIG_VIDEO_IPUV3 #define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 260000000 -#define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP #define CONFIG_VIDEO_BMP_LOGO diff --git a/include/configs/h2200.h b/include/configs/h2200.h index d8724f8..530a88e 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -109,7 +109,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } -#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 584ce52..0fb6fb3 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -73,7 +73,6 @@ #define CONFIG_FS_EXT4 /* Command line configuration */ -#define CONFIG_CMD_ENV #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 5574e77..405129b 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -26,9 +26,6 @@ #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR -#define CONFIG_CMD_FPGAD -#define CONFIG_CMD_IOLOOP - /* * System Clock Setup */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 2cf0027..a5782f3 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -23,13 +23,11 @@ * Compression configuration */ #define CONFIG_BZIP2 -#define CONFIG_LZMA /* * Commands configuration */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_IDE /* * mv-common.h should be defined after CMD configs since it used them @@ -88,14 +86,14 @@ /* * SATA driver configuration */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT #define CONFIG_MVSATA_IDE_USE_PORT0 #define CONFIG_MVSATA_IDE_USE_PORT1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ /* * RTC driver configuration diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 950a719..63e5060 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -25,14 +25,12 @@ * Compression configuration */ #define CONFIG_BZIP2 -#define CONFIG_LZMA #define CONFIG_LZO /* * Commands configuration */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND /* @@ -88,7 +86,6 @@ /* * File system */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 7ffc9d1..7bedcb9 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -413,7 +413,6 @@ */ #define CONFIG_CMD_NAND #define CONFIG_CMDLINE_EDITING -#define CONFIG_CMD_JFFS2 #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME @@ -444,7 +443,6 @@ #define CONFIG_UBOOTPATH "ids8313/u-boot.bin" #define CONFIG_FDTFILE "ids8313/ids8313.dtb" #define CONFIG_LOADADDR 0x400000 -#define CONFIG_CMD_ENV_FLAGS #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo" /* Initial Memory map for Linux*/ @@ -541,8 +539,5 @@ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x9 #define CONFIG_IMAGE_FORMAT_LEGACY -#define CONFIG_CMD_HASH -#define CONFIG_SHA1 -#define CONFIG_SHA256 #endif /* __CONFIG_H */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index b8a867c..18d8d2f 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -159,7 +159,6 @@ /* * U-Boot commands */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 0a66720..739af03 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -48,7 +48,6 @@ /*********************************************************** * Command definition ***********************************************************/ -#define CONFIG_CMD_EEPROM #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \ diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h index f783eac..741bdfa 100644 --- a/include/configs/imx6qdl_icore.h +++ b/include/configs/imx6qdl_icore.h @@ -126,8 +126,6 @@ /* FIT */ #ifdef CONFIG_FIT # define CONFIG_HASH_VERIFY -# define CONFIG_SHA1 -# define CONFIG_SHA256 # define CONFIG_IMAGE_FORMAT_LEGACY #endif diff --git a/include/configs/imx6qdl_icore_rqs.h b/include/configs/imx6qdl_icore_rqs.h index a639468..f52865b 100644 --- a/include/configs/imx6qdl_icore_rqs.h +++ b/include/configs/imx6qdl_icore_rqs.h @@ -108,8 +108,6 @@ /* FIT */ #ifdef CONFIG_FIT # define CONFIG_HASH_VERIFY -# define CONFIG_SHA1 -# define CONFIG_SHA256 # define CONFIG_IMAGE_FORMAT_LEGACY #endif diff --git a/include/configs/imx6ul_geam.h b/include/configs/imx6ul_geam.h index 9f66dd3..2e12b97 100644 --- a/include/configs/imx6ul_geam.h +++ b/include/configs/imx6ul_geam.h @@ -125,8 +125,6 @@ /* FIT */ #ifdef CONFIG_FIT # define CONFIG_HASH_VERIFY -# define CONFIG_SHA1 -# define CONFIG_SHA256 # define CONFIG_IMAGE_FORMAT_LEGACY #endif diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h index 5ce70ae..76ae159 100644 --- a/include/configs/imx6ul_isiot.h +++ b/include/configs/imx6ul_isiot.h @@ -125,8 +125,6 @@ /* FIT */ #ifdef CONFIG_FIT # define CONFIG_HASH_VERIFY -# define CONFIG_SHA1 -# define CONFIG_SHA256 # define CONFIG_IMAGE_FORMAT_LEGACY #endif diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 5ee9c2b..d651eff 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -72,7 +72,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE #define CONFIG_CMD_PCI #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -219,86 +218,6 @@ #define CONFIG_SYS_GPS_PORT_CONFIG 0x01501444 /* - * RTC configuration - */ -#define CONFIG_RTC_RTC4543 1 /* use external RTC */ - -/* - * Software (bit-bang) three wire serial configuration - * - * Note that we need the ifdefs because otherwise compilation of - * mkimage.c fails. - */ -#define CONFIG_SOFT_TWS 1 - -#ifdef TWS_IMPLEMENTATION -#include <mpc5xxx.h> -#include <asm/io.h> - -#define TWS_CE MPC5XXX_GPIO_WKUP_PSC1_4 /* GPIO_WKUP_0 */ -#define TWS_WR MPC5XXX_GPIO_WKUP_PSC2_4 /* GPIO_WKUP_1 */ -#define TWS_DATA MPC5XXX_GPIO_SINT_PSC3_4 /* GPIO_SINT_0 */ -#define TWS_CLK MPC5XXX_GPIO_SINT_PSC3_5 /* GPIO_SINT_1 */ - -static inline void tws_ce(unsigned bit) -{ - struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - if (bit) - setbits_8(&wu_gpio->dvo, TWS_CE); - else - clrbits_8(&wu_gpio->dvo, TWS_CE); -} - -static inline void tws_wr(unsigned bit) -{ - struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - if (bit) - setbits_8(&wu_gpio->dvo, TWS_WR); - else - clrbits_8(&wu_gpio->dvo, TWS_WR); -} - -static inline void tws_clk(unsigned bit) -{ - struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - if (bit) - setbits_8(&gpio->sint_dvo, TWS_CLK); - else - clrbits_8(&gpio->sint_dvo, TWS_CLK); -} - -static inline void tws_data(unsigned bit) -{ - struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - if (bit) - setbits_8(&gpio->sint_dvo, TWS_DATA); - else - clrbits_8(&gpio->sint_dvo, TWS_DATA); -} - -static inline unsigned tws_data_read(void) -{ - struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - return !!(in_8(&gpio->sint_ival) & TWS_DATA); -} - -static inline void tws_data_config_output(unsigned output) -{ - struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - if (output) - setbits_8(&gpio->sint_ddr, TWS_DATA); - else - clrbits_8(&gpio->sint_ddr, TWS_DATA); -} -#endif /* TWS_IMPLEMENTATION */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/intip.h b/include/configs/intip.h index f1f8409..036fd20 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -218,13 +218,6 @@ #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 -/* I2C SYSMON */ -#define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */ -#define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 40, 10 }, { 50, 20 }, { 60, 40 } } -#define CONFIG_DTT_TACH_LIMIT 0xa10 - /* RTC configuration */ #define CONFIG_RTC_DS1337 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 @@ -272,7 +265,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/configs/io.h b/include/configs/io.h index 3e44a8c..3fde912 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -31,9 +31,6 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66 #define PLLMR1_DEFAULT PLLMR1_266_133_66 -/* new uImage format support */ -#define CONFIG_FIT_DISABLE_SHA256 - #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ /* @@ -57,9 +54,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IRQ /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) @@ -93,11 +87,6 @@ #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 /* Temp sensor/hwmon/dtt */ -#define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */ -#define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 40, 10 }, { 50, 20 }, { 60, 40 } } -#define CONFIG_DTT_TACH_LIMIT 0xa10 /* * FLASH organization diff --git a/include/configs/io64.h b/include/configs/io64.h index 8e754fc..1b58f04 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -327,14 +327,6 @@ #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 -/* Temp sensor/hwmon/dtt */ -#define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0x18, 0x4c, 0x4e } /* Sensor addresses */ -#define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 40, 10 }, { 43, 13 }, { 46, 16 }, \ - { 50, 20 }, { 53, 27 }, { 56, 34 }, { 60, 40 } } -#define CONFIG_DTT_TACH_LIMIT 0xa10 - /*----------------------------------------------------------------------- * Ethernet *----------------------------------------------------------------------*/ @@ -373,7 +365,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT #define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 9c3be78..99e920b 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -33,9 +33,6 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66 #define PLLMR1_DEFAULT PLLMR1_266_133_66 -/* new uImage format support */ -#define CONFIG_FIT_DISABLE_SHA256 - #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ /* @@ -57,9 +54,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_FPGAD -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IRQ /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 5caf02e..a3c0cfa 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -241,7 +241,6 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI @@ -273,7 +272,6 @@ /* defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index ece72c6..c6390db 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -88,8 +88,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE /* IDE harddisk support */ -#define CONFIG_CMD_IRQ /* irqinfo */ #define CONFIG_CMD_PCI /* pciinfo */ #define CONFIG_SYS_LOWBOOT 1 diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 3143b63..3f39a26 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -123,31 +123,6 @@ #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */ -/* I2C DTT */ -#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ -#define CONFIG_SYS_DTT_BUS_NUM 1 /* The I2C bus for DTT */ -/* - * standard dtt sensor configuration - bottom bit will determine local or - * remote sensor of the ADM1021, the rest determines index into - * CONFIG_SYS_DTT_ADM1021 array below. - */ -#define CONFIG_DTT_SENSORS { 0, 1 } - -/* - * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). - * there will be one entry in this array for each two (dummy) sensors in - * CONFIG_DTT_SENSORS. - * - * For Katmai board: - * - only one ADM1021 - * - i2c addr 0x18 - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT ouput disabled - * - local temp sensor enabled, min set to 0 deg, max set to 85 deg - * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg - */ -#define CONFIG_SYS_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} } - /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ @@ -170,7 +145,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_ECCTEST #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/configs/kc1.h b/include/configs/kc1.h index 343685a..408e563 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -90,7 +90,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT /* * Console diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 1f5c2ad..a91a6a9 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -317,11 +317,6 @@ #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 -/* Standard DTT sensor configuration */ -#define CONFIG_DTT_DS1775 1 -#define CONFIG_DTT_SENSORS { 0 } -#define CONFIG_SYS_I2C_DTT_ADDR 0x48 - /* RTC configuration */ #define CONFIG_RTC_DS1338 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 872e2b3..c2b38d8 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -13,9 +13,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MTDPARTS #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 8293607..0d50538 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -14,7 +14,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_CMD_DTT #define CONFIG_JFFS2_CMDLINE /* standard km ethernet_present for piggy */ diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 35ec097..7d69224 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -215,13 +215,6 @@ #define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/ -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_HYSTERESIS 3 -#define CONFIG_SYS_DTT_BUS_NUM 1 - #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_KMETER1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 9bfcfde..664a64c 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -370,7 +370,6 @@ int get_scl(void); * additionnal command line configuration. */ #define CONFIG_CMD_PCI -#define CONFIG_CMD_ERRATA /* we don't need flash support */ #undef CONFIG_FLASH_CFI_MTD diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h index aeece20..09c3aa9 100644 --- a/include/configs/km82xx.h +++ b/include/configs/km82xx.h @@ -268,13 +268,6 @@ int get_sda(void); int get_scl(void); #endif -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_HYSTERESIS 3 -#define CONFIG_SYS_DTT_BUS_NUM 2 - #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_IMMR 0xF0000000 diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 9e9d879..66e65c8 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -43,8 +43,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_IDE #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */ #endif @@ -120,7 +118,6 @@ */ #ifdef CONFIG_CMD_I2C /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 09f890d..561b81a 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -85,7 +85,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* Command line configuration */ -#define CONFIG_CMD_ENV #undef CONFIG_CMD_IMLS #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 2b3833d..5b8500b 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -61,7 +61,6 @@ /* EEPROM */ #define CONFIG_ID_EEPROM -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 35d17b9..d6839c0 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -305,16 +305,6 @@ #define CONFIG_MISC_INIT_R -/* Hash command with SHA acceleration supported in hardware */ - -#ifdef CONFIG_FSL_CAAM - -#define CONFIG_CMD_HASH - -#define CONFIG_SHA_HW_ACCEL - -#endif - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 333bb26..a27d70e 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -570,12 +570,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_MISC_INIT_R -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #include <asm/fsl_secure_boot.h> #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 81f38a3..60c3d5d 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -434,12 +434,6 @@ #define CONFIG_MISC_INIT_R -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #include <asm/fsl_secure_boot.h> #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e269248..b35f96d 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -174,9 +174,6 @@ #endif /* Command line configuration */ -#ifndef SPL_NO_ENV -#define CONFIG_CMD_ENV -#endif /* MMC */ #ifndef SPL_NO_MMC @@ -301,10 +298,4 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #endif /* __LS1043A_COMMON_H */ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 957ffd3..1fbafaa 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -139,9 +139,6 @@ #define CONFIG_SYS_I2C_MXC_I2C4 /* Command line configuration */ -#ifndef SPL_NO_ENV -#define CONFIG_CMD_ENV -#endif /* MMC */ #ifndef SPL_NO_MMC @@ -230,10 +227,4 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #endif /* __LS1046A_COMMON_H */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 427f623..285e48d 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -160,7 +160,6 @@ unsigned long long get_qixis_addr(void); #endif /* Command line configuration */ -#define CONFIG_CMD_ENV /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) @@ -230,10 +229,4 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* Hash command with SHA acceleration supported in hardware */ -#ifdef CONFIG_FSL_CAAM -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#endif - #endif /* __LS2_COMMON_H */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index f50ad42..dc52b22 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -332,7 +332,6 @@ unsigned long get_board_ddr_clk(void); /* EEPROM */ #define CONFIG_ID_EEPROM -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index d0bf552..2e0d95e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -278,7 +278,6 @@ unsigned long get_board_sys_clk(void); /* EEPROM */ #define CONFIG_ID_EEPROM -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index ce6d7c9..43e4a32 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -38,8 +38,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_IDE /* * mv-common.h should be defined after CMD configs since it used them @@ -147,7 +145,7 @@ #undef CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #undef CONFIG_IDE_LED #undef CONFIG_SYS_IDE_MAXBUS #define CONFIG_SYS_IDE_MAXBUS 1 diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 6893bf2..8971096 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -381,8 +381,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index c729e09..b237cea 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -218,7 +218,6 @@ */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_TEXT_BASE 0x70008000 #define CONFIG_SPL_PAD_TO 0x8000 #define CONFIG_SPL_STACK 0x70004000 diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index 8413c5c..6dc1fb0 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -206,7 +206,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #define CONFIG_SPL_SPI_LOAD diff --git a/include/configs/makalu.h b/include/configs/makalu.h index da5cfa1..a92bc43 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -189,11 +189,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* Standard DTT sensor configuration */ -#define CONFIG_DTT_DS1775 1 -#define CONFIG_DTT_SENSORS { 0 } -#define CONFIG_SYS_I2C_DTT_ADDR 0x48 - /* RTC configuration */ #define CONFIG_RTC_X1205 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f @@ -232,7 +227,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT #define CONFIG_CMD_PCI /* POST support */ diff --git a/include/configs/malta.h b/include/configs/malta.h index fcee374..1f977cb 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -101,7 +101,6 @@ /* * Commands */ -#define CONFIG_CMD_IDE #define CONFIG_CMD_PCI #define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index cdb3a47..b82a684 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -23,7 +23,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 4b9b531..fca1af9 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -14,7 +14,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #include "imx6_spl.h" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000) #define CONFIG_SPL_OS_BOOT diff --git a/include/configs/mcx.h b/include/configs/mcx.h index c70e68c..0c237a5 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -80,7 +80,6 @@ #define CONFIG_USB_ETHER_MCS7830 /* commands to include */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_UBIFS @@ -289,7 +288,6 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_BASE diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index fe94e66..17a97df 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -273,9 +273,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ #define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_FUSE -#undef CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 /* * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h index f1734c0..12a4dfc 100644 --- a/include/configs/meson-gxbb-common.h +++ b/include/configs/meson-gxbb-common.h @@ -26,8 +26,6 @@ #define GICD_BASE 0xc4301000 #define GICC_BASE 0xc4302000 -#define CONFIG_CMD_ENV - /* Monitor Command Prompt */ /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index e8fe2f6..cc7f819 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -168,11 +168,9 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL #if defined(FLASH) -# define CONFIG_CMD_JFFS2 # undef CONFIG_CMD_UBIFS # if !defined(RAMENV) @@ -186,7 +184,6 @@ # define CONFIG_CMD_SAVES # endif #else -# undef CONFIG_CMD_JFFS2 # undef CONFIG_CMD_UBIFS #endif #endif @@ -275,7 +272,6 @@ /* SPL part */ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index cb5c346..75633f6 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -33,10 +33,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 7919320..e11a0e6 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -378,12 +378,8 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_FUSE - #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif @@ -414,10 +410,10 @@ "1m(u-boot);" \ "mpc5121.nand:-(data)" -#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) +#if defined(CONFIG_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) #define CONFIG_SUPPORT_VFAT -#endif /* defined(CONFIG_CMD_IDE) */ +#endif /* defined(CONFIG_IDE) */ /* * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 0015be9..2855c00 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -14,7 +14,6 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_PCMCIA -#define CONFIG_CMD_IDE #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_BOOTFILE "/boot/zImage" diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 26472e9..de6e58a 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -12,7 +12,6 @@ #define CONFIG_CPU_SH7722 1 #define CONFIG_MS7722SE 1 -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_SDRAM #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h index 2e37317..ed83eeb 100644 --- a/include/configs/mt_ventoux.h +++ b/include/configs/mt_ventoux.h @@ -39,7 +39,6 @@ /* * FPGA */ -#define CONFIG_CMD_FPGA_LOADMK #define CONFIG_FPGA #define CONFIG_FPGA_XILINX #define CONFIG_FPGA_SPARTAN3 diff --git a/include/configs/munices.h b/include/configs/munices.h index 1679430..ad2d69e 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -26,7 +26,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IMMAP #define CONFIG_CMD_REGINFO #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index d000d76..13bd6cf 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -128,7 +128,6 @@ * File system */ #ifdef CONFIG_SYS_MVFS -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h index 83c559e..a2f68ad 100644 --- a/include/configs/mv-plug-common.h +++ b/include/configs/mv-plug-common.h @@ -22,14 +22,11 @@ */ #ifdef CONFIG_SYS_MVFS #define CONFIG_BZIP2 -#define CONFIG_LZMA #endif /* CONFIG_SYS_MVFS */ /* * Commands configuration */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_IDE /* * Extra file system diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 54bc563..4513adf 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -33,7 +33,6 @@ * Hardware drivers */ #define CONFIG_FSL_IIM -#define CONFIG_CMD_FUSE #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 21ac3fc..1a8ab4e 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -78,7 +78,6 @@ #define CONFIG_FSL_USDHC /* Fuses */ -#define CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP /* Secure boot (HAB) support */ diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index b2cecc5..bc22f56 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -40,7 +40,6 @@ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI -#define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_VIDEO_SKIP /* USB */ diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 9a20c77..fe46010 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -59,7 +59,6 @@ #define CONFIG_FSL_USDHC /* Fuses */ -#define CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #define CONFIG_ARMV7_SECURE_BASE 0x00900000 diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 7004176..dfa8122 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -42,7 +42,6 @@ * Commands configuration */ #define CONFIG_CMD_NAND -#define CONFIG_CMD_IDE #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING @@ -102,7 +101,6 @@ /* * File system */ -#define CONFIG_CMD_JFFS2 #define CONFIG_JFFS2_NAND #define CONFIG_JFFS2_LZO #define CONFIG_CMD_UBIFS diff --git a/include/configs/neo.h b/include/configs/neo.h index 9115e25..5a8a5c2 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -31,9 +31,6 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66_33 #define PLLMR1_DEFAULT PLLMR1_266_133_66_33 -/* new uImage format support */ -#define CONFIG_FIT_DISABLE_SHA256 - #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ /* @@ -57,9 +54,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IRQ /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) @@ -100,13 +94,6 @@ #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -/* Temp sensor/hwmon/dtt */ -#define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */ -#define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 40, 10 }, { 50, 20 }, { 60, 40 } } -#define CONFIG_DTT_TACH_LIMIT 0xa10 - /* * FLASH organization */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 1362528..00b84f7 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -93,7 +93,6 @@ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024) #define CONFIG_BMP_16BPP #define CONFIG_IPUV3_CLK 260000000 -#define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/novena.h b/include/configs/novena.h index e0ed304..6cb1807 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -17,7 +17,6 @@ #include "mx6_common.h" /* U-Boot Commands */ -#define CONFIG_CMD_EEPROM #define CONFIG_FAT_WRITE #define CONFIG_CMD_PCI #define CONFIG_CMD_SATA @@ -157,7 +156,6 @@ #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 260000000 -#define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP #endif diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index eba31c4..bc67270 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -21,11 +21,9 @@ /* compression configuration */ #define CONFIG_BZIP2 -#define CONFIG_LZMA /* commands configuration */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_IDE /* * mv-common.h should be defined after CMD configs since it used them @@ -80,12 +78,12 @@ #endif /* CONFIG_CMD_NET */ /* SATA driver configuration */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT #define CONFIG_MVSATA_IDE_USE_PORT0 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ /* RTC driver configuration */ #ifdef CONFIG_CMD_DATE diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 246fb80..ba29f3e 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -61,7 +61,6 @@ /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ #undef CONFIG_EXYNOS_TMU -#undef CONFIG_TMU_CMD_DTT #define CONFIG_DFU_ALT_SYSTEM \ "uImage fat 0 1;" \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index d8ca622..53bfc13 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -25,8 +25,6 @@ * ---------------------------------------------------------------------------- */ -#define CONFIG_CMD_JFFS2 - #define CONFIG_CMD_NAND /* ---------------------------------------------------------------------------- @@ -317,7 +315,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 0cc0042..9db4eeb 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -284,7 +284,6 @@ /* * U-Boot commands */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS @@ -309,7 +308,6 @@ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV #endif /* SD/MMC */ @@ -330,7 +328,6 @@ #ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 19660db..89e963d 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -26,9 +26,7 @@ * Commands configuration */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND -#define CONFIG_CMD_IDE /* * mv-common.h should be defined after CMD configs since it used them diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 34da90f..0582fa3 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* OCOTP Configs */ -#define CONFIG_CMD_IMXOTP #define CONFIG_IMX_OTP #define IMX_OTP_BASE OCOTP_BASE_ADDR #define IMX_OTP_ADDR_MAX 0x7F @@ -91,7 +90,6 @@ #define CONFIG_PHY_SMSC #ifndef CONFIG_SPL -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_BUS 1 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 638e9da..71b4f40 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -631,7 +631,6 @@ #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 /* enable read and write access to EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 @@ -814,7 +813,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 427629f..fd644f2 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -230,7 +230,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_PCA9555_ADDR 0x23 /* enable read and write access to EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 @@ -385,7 +384,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO /* diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index f6bd4fe..efbcbd2 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -148,6 +148,4 @@ * Command line configuration. */ -#undef CONFIG_CMD_IDE - #endif /* __CONFIG_H */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 406f3e5..6da17be 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -49,7 +49,6 @@ Serial console configuration /* * Command line configuration. */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PCI #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index ea3872f..fc75ca8 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -108,7 +108,6 @@ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ /* I2C Configuration */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 51b489a..8c0e264 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -91,7 +91,6 @@ #define CONFIG_SYS_RTC_BUS_NUM 2 /* EEPROM (24FC256) */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_EEPROM_BUS 2 diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index f622be6..39018ac 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -86,9 +86,6 @@ #define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)" /* Various command support */ -#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */ -#define CONFIG_CMD_GSC -#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */ #define CONFIG_RBTREE /* Physical Memory Map */ diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 4bd8236..676d55f 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -340,8 +340,6 @@ #define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_FUSE - /* * Miscellaneous configurable options */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 2cb6f56..9c8720b 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -107,7 +107,6 @@ /* I2C Configuration */ #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index b220d14..41d5722 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -226,7 +226,6 @@ #endif -#define CONFIG_CMD_JFFS2 1 #define CONFIG_JFFS2_CMDLINE 1 #define CONFIG_JFFS2_NAND 1 #define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 22b3c2e..5e58b6b 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -69,7 +69,6 @@ */ #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_JFFS2 1 #define CONFIG_JFFS2_CMDLINE 1 #define CONFIG_JFFS2_NAND 1 #define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 36f6e95..f94e74f 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -29,7 +29,6 @@ * Commands configuration */ #define CONFIG_SYS_MVFS -#define CONFIG_CMD_ENV #define CONFIG_CMD_NAND /* @@ -78,7 +77,6 @@ /* * File system */ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 59a793b..abdc93c 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -50,8 +50,6 @@ #define CONFIG_SYS_NS16550_COM1 0xb40003f8 #define CONFIG_CONS_INDEX 1 -#define CONFIG_CMD_IDE - #ifdef CONFIG_SYS_BIG_ENDIAN #define CONFIG_IDE_SWAP_IO #endif @@ -123,6 +121,4 @@ #define MEM_SIZE 128 -#define CONFIG_LZMA - #endif /* __CONFIG_H */ diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 28b791a..f1e096f 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -50,8 +50,6 @@ #define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 #define CONFIG_CONS_INDEX 1 -#define CONFIG_CMD_IDE - #ifdef CONFIG_SYS_BIG_ENDIAN #define CONFIG_IDE_SWAP_IO #endif @@ -123,6 +121,4 @@ #define MEM_SIZE 128 -#define CONFIG_LZMA - #endif /* __CONFIG_H */ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index ffd776f..c268107 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -127,7 +127,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * Command line configuration. */ -#define CONFIG_CMD_IRQ #ifdef CONFIG_PCI #define CONFIG_CMD_PCI diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 687befd..3509c2f 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -25,10 +25,9 @@ * - AHCI controller is supported for QEMU '-M q35' target * * Default configuraion is to support the QEMU default x86 target - * Undefine CONFIG_CMD_IDE to support q35 target + * Undefine CONFIG_IDE to support q35 target */ -#define CONFIG_CMD_IDE -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define CONFIG_SYS_IDE_MAXBUS 2 #define CONFIG_SYS_IDE_MAXDEVICE 4 #define CONFIG_SYS_ATA_BASE_ADDR 0 diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index b159b1e..6212dba 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV #define CONFIG_BOOTARGS "console=ttySC3,115200" diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 64fc5b2..744d567 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -12,7 +12,6 @@ * Command line configuration. */ #define CONFIG_CMD_PCI -#define CONFIG_CMD_IDE #define CONFIG_CMD_SH_ZIMAGEBOOT /* SCIF */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 2efe36f..bb79a9f 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -22,7 +22,6 @@ */ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_PCI -#define CONFIG_CMD_IDE #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 @@ -120,7 +119,7 @@ #endif /* Compact flash Support */ -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #define CONFIG_IDE_RESET 1 #define CONFIG_SYS_PIO_MODE 1 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ @@ -131,6 +130,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ #define CONFIG_IDE_SWAP_IO -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #endif /* __R7780RP_H */ diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index c5e508e..81a1553 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -25,7 +25,6 @@ #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_NS16550_MEM32 -#define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x60000000 once return from SPL */ diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index e7a8f72..4cf71fa 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -23,7 +23,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SYS_NS16550_MEM32 -#define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x0 once return from SPL */ diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 33487cd..b25a7ea 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -117,7 +117,6 @@ #define CONFIG_LOADADDR 0xC307FFC0 #define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" -#define CONFIG_CMD_ENV #define CONFIG_EXTRA_ENV_SETTINGS \ "boot_scripts=boot.scr.uimg boot.scr\0" \ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h index 7d20d65..57fa67d 100644 --- a/include/configs/sama5d2_ptc.h +++ b/include/configs/sama5d2_ptc.h @@ -115,7 +115,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_SERIALFLASH diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index f044f0e..42fb1e1 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -79,7 +79,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index b4a62bd..074c756 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -97,7 +97,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 509457b..9540a4a 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index c584b0b..f1cf65f 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -75,7 +75,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 91f286b..09a9757 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -73,7 +73,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 37c6132..c62b45e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -18,7 +18,6 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_IO_TRACE -#define CONFIG_CMD_IOTRACE #endif #ifndef CONFIG_TIMER @@ -29,7 +28,6 @@ #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_CMD_PCI -#define CONFIG_CMD_IO #define CONFIG_FS_FAT #define CONFIG_FAT_WRITE @@ -100,18 +98,10 @@ #define CONFIG_BOOTP_SERVERIP #define CONFIG_IP_DEFRAG -/* Can't boot elf images */ - -#define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY -#define CONFIG_SHA1 -#define CONFIG_SHA256 #define CONFIG_CMD_SANDBOX -#define CONFIG_CMD_ENV_FLAGS -#define CONFIG_CMD_ENV_CALLBACK - #define CONFIG_BOOTARGS "" #ifndef SANDBOX_NO_SDL @@ -159,12 +149,8 @@ #define CONFIG_GZIP_COMPRESSED #define CONFIG_BZIP2 #define CONFIG_LZO -#define CONFIG_LZMA - -#define CONFIG_CMD_LZMADEC #ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_IDE #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 #define CONFIG_SYS_IDE_MAXDEVICE 2 diff --git a/include/configs/sandbox_spl.h b/include/configs/sandbox_spl.h index 2aaa3ab..93b595d 100644 --- a/include/configs/sandbox_spl.h +++ b/include/configs/sandbox_spl.h @@ -8,8 +8,6 @@ #include <configs/sandbox.h> -#define CONFIG_SPL_BOARD_INIT - #define CONFIG_SPL_FRAMEWORK #endif diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index c39bb24..7a120ed 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -159,14 +159,6 @@ #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - /* * Default environment variables */ @@ -219,7 +211,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 69073e8..2186f21 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -18,7 +18,6 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_JFFS2 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index a111057..9d2c106 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -90,13 +90,13 @@ /* * SATA driver configuration */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT #define CONFIG_MVSATA_IDE_USE_PORT0 #define CONFIG_MVSATA_IDE_USE_PORT1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/shmin.h b/include/configs/shmin.h index bc1eba3..995f76a 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -16,7 +16,6 @@ /* #define CONFIG_T_SH7706LSR 1 */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5bb471c..9161867 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -127,7 +127,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_AM33XX_BCH #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index e09dfe6..1236da7 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -233,7 +233,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_DRIVERS diff --git a/include/configs/sniper.h b/include/configs/sniper.h index c56169d..6b065c9 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -87,7 +87,6 @@ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index da7e4ad..bdc6512 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -307,9 +307,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) -#define CONFIG_SPL_BOARD_INIT -#endif /* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index e208f45..251dd0e 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -12,8 +12,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG -#define CONFIG_CMD_EEPROM - /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 76b4038..bfd4e5f 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -210,13 +210,6 @@ /* I2C W83782G HW-Monitoring IC */ #define CONFIG_SYS_I2C_W83782G_ADDR 0x28 /* W83782G address */ -/* I2C temp sensor */ -/* Socrates uses Maxim's DS75, which is compatible with LM75 */ -#define CONFIG_DTT_LM75 1 -#define CONFIG_DTT_SENSORS {4} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 125 -#define CONFIG_SYS_DTT_LOW_TEMP -55 -#define CONFIG_SYS_DTT_HYSTERESIS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* @@ -286,8 +279,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM #define CONFIG_CMD_SDRAM #define CONFIG_CMD_REGINFO diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 75fd27a..86e14ff 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -97,7 +97,6 @@ * Command support defines */ #define CONFIG_CMD_NAND -#define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES /* diff --git a/include/configs/strider.h b/include/configs/strider.h index 1298808..994ac73 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -28,9 +28,6 @@ #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_CMD_FPGAD -#define CONFIG_CMD_IOLOOP - /* * System Clock Setup */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 997a92c..f042f0d 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -32,6 +32,10 @@ # define CONFIG_MACH_TYPE_COMPAT_REV 1 #endif +#ifdef CONFIG_ARM64 +#define CONFIG_BUILD_TARGET "u-boot.itb" +#endif + /* Serial & console */ #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ @@ -185,12 +189,17 @@ #endif #ifdef CONFIG_SUNXI_HIGH_SRAM -#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB */ +#define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ +#ifdef CONFIG_ARM64 +/* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ +#define LOW_LEVEL_SRAM_STACK 0x00054000 +#else #define LOW_LEVEL_SRAM_STACK 0x00018000 +#endif /* !CONFIG_ARM64 */ #else -#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ +#define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ #endif diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 964115f..ed5aaa2 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -349,7 +349,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_ECCTEST #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 55b8e3e..260cdee 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -241,8 +241,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_ERRATA -#define CONFIG_CMD_IRQ #ifdef CONFIG_PCI #define CONFIG_CMD_PCI diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 34ce122..0b87c9c 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -71,7 +71,6 @@ /* commands to include */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 400000 @@ -170,7 +169,6 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_CONSOLE #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_NAND_SOFTECC diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index ae6c768..f994d2d 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -244,7 +244,6 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 4505be8..bed2a5c 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -246,7 +246,6 @@ #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_DRIVERS diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 9720a09..84ca1c4 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -69,7 +69,6 @@ #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_CMD_HDMIDETECT #endif /* PCI */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 5107a1f..6982eaa 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -87,11 +87,8 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_CMD_ENTERRCM - /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \ CONFIG_SPL_TEXT_BASE) diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 2a671e8..27cae9d 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -23,7 +23,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_ENV #define CONFIG_CMD_SATA /* diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 60322b1..a4066a8 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -156,8 +156,6 @@ #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT - /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 51b09d4..2303970 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -122,8 +122,6 @@ #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT - #define CONFIG_SYS_TEXT_BASE 0x80800000 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 1561d54..0bd3c9f 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -216,7 +216,6 @@ #endif /* General parts of the framework, required. */ -#define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_BASE diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 868464c..3161c50 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -208,7 +208,6 @@ /* U-Boot command configuration */ #define CONFIG_CMD_SAVES #define CONFIG_CMD_UBIFS -#define CONFIG_CMD_EEPROM /* U-Boot general configuration */ #define CONFIG_MISC_INIT_R diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 23160bd..a289225 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -44,10 +44,6 @@ #undef CONFIG_SPL_FPGA_SUPPORT /* FPGA commands that we don't use */ -#undef CONFIG_CMD_FPGA_LOADMK -#undef CONFIG_CMD_FPGA_LOADP -#undef CONFIG_CMD_FPGA_LOADBP -#undef CONFIG_CMD_FPGA_LOADFS /* Extras */ #define CONFIG_CMD_MEMTEST diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index d39dd92..fc99dbd 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -36,7 +36,6 @@ "console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" #define CONFIG_BOOTCOMMAND \ "dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" -#define CONFIG_LZMA #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x10000 diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 738693c..0b36255 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -57,19 +57,11 @@ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_I2C_SPEED 100000 -/* I2C SYSMON (LM75) */ -#define CONFIG_DTT_LM75 -#define CONFIG_DTT_MAX_TEMP 70 -#define CONFIG_DTT_MIN_TEMP -30 -#define CONFIG_DTT_HYSTERESIS 3 -#define CONFIG_CMD_DTT - /* I2C EEPROM (M24C64) */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */ #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_CMD_EEPROM #define CONFIG_POWER #define CONFIG_POWER_I2C @@ -371,8 +363,5 @@ #endif /* Support at least the sensor on TQMa6 SOM */ -#if !defined(CONFIG_DTT_SENSORS) -#define CONFIG_DTT_SENSORS { 0 } -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/tqma6_mba6.h b/include/configs/tqma6_mba6.h index 3d6e438..69e9079 100644 --- a/include/configs/tqma6_mba6.h +++ b/include/configs/tqma6_mba6.h @@ -10,8 +10,6 @@ #ifndef __CONFIG_TQMA6_MBA6_H #define __CONFIG_TQMA6_MBA6_H -#define CONFIG_DTT_SENSORS { 0, 1 } - #define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index b9cc5d6..4ab4c65 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -7,10 +7,6 @@ #ifndef __CONFIG_TQMA6_WRU4_H #define __CONFIG_TQMA6_WRU4_H -/* DTT sensors */ -#define CONFIG_DTT_SENSORS { 0, 1 } -#define CONFIG_SYS_DTT_BUS_NUM 2 - /* Ethernet */ #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 8fe4165..d18a333 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -66,7 +66,6 @@ /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_EEPROM_BUS_NUM 1 @@ -105,8 +104,6 @@ #define CONFIG_CMD_UBIFS /* UBIFS commands */ #define CONFIG_LZO /* LZO is needed for UBIFS */ -#undef CONFIG_CMD_JFFS2 /* JFFS2 Support */ - /* needed for ubi */ #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ @@ -273,7 +270,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC diff --git a/include/configs/twister.h b/include/configs/twister.h index a7de75e..94dde90 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -43,6 +43,5 @@ 0x600000) #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_SPL_BOARD_INIT #endif /* __CONFIG_H */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 6271b07..bc57e8a 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -289,8 +289,6 @@ #define CONFIG_SPL_BOARD_LOAD_IMAGE #endif -#define CONFIG_SPL_BOARD_INIT - #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 /* subtract sizeof(struct image_header) */ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index f725b79..e25bf99 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ /* Fuse */ -#define CONFIG_CMD_FUSE #define CONFIG_FSL_IIM /* U-Boot memory offsets */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 0bc0ae5..2bd6cc1 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -73,9 +73,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_SDRAM #define CONFIG_TIMESTAMP /* Print image info with timestamp */ diff --git a/include/configs/vct.h b/include/configs/vct.h index b1dccdf..7b04e65 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -77,7 +77,6 @@ /* * Commands */ -#define CONFIG_CMD_EEPROM /* * Only Premium/Platinum have ethernet support right now @@ -235,7 +234,6 @@ int vct_gpio_get(int pin); */ #if defined(CONFIG_VCT_ONENAND) #define CONFIG_SYS_USE_UBI -#define CONFIG_CMD_JFFS2 #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS @@ -254,10 +252,6 @@ int vct_gpio_get(int pin); * (NOR/OneNAND) usage and Linux kernel booting. */ #if defined(CONFIG_VCT_SMALL_IMAGE) -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_LOADY #undef CONFIG_CMD_REGINFO #undef CONFIG_CMD_STRINGS #undef CONFIG_CMD_TERMINAL diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index ae13246..11cb535 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -125,7 +125,6 @@ #endif /*#define CONFIG_MENU_SHOW*/ -#define CONFIG_CMD_ENV /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 3e7dc9b..2460294 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -20,7 +20,6 @@ /* Enable passing of ATAGs */ #define CONFIG_CMDLINE_TAG -#define CONFIG_CMD_FUSE #ifdef CONFIG_CMD_FUSE #define CONFIG_MXC_OCOTP #endif diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index ae18bd6..1aed81f 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -351,10 +351,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV -#endif - /* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0 diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 3e0ea71..2a6c6fb 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -74,7 +74,6 @@ #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IPUV3_CLK 260000000 -#define CONFIG_CMD_HDMIDETECT #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP #endif diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index eb42d8c..bab7fdf 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -22,7 +22,6 @@ */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_TEXT_BASE 0x10002300 #define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 82f4af9..56f53b9 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -74,7 +74,6 @@ * I2C EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 @@ -85,14 +84,6 @@ #define CONFIG_RTC_DS1374 /* - * I2C Temperature Sensor (DTT) - */ - -#define CONFIG_CMD_DTT -#define CONFIG_DTT_SENSORS { 0, 1 } -#define CONFIG_DTT_DS620 - -/* * U-Boot General Configurations */ #define CONFIG_SYS_LONGHELP @@ -143,7 +134,6 @@ #define CONFIG_LPC32XX_SSP #define CONFIG_LPC32XX_SSP_TIMEOUT 100000 #define CONFIG_CMD_MAX6957 -#define CONFIG_CMD_HD44760 /* * Environment */ @@ -173,7 +163,6 @@ #define CONFIG_SPL_TEXT_BASE 0x00000000 /* SPL will use SRAM as stack */ #define CONFIG_SPL_STACK 0x0000FFF8 -#define CONFIG_SPL_BOARD_INIT /* Use the framework and generic lib */ #define CONFIG_SPL_FRAMEWORK /* SPL will use serial */ diff --git a/include/configs/x600.h b/include/configs/x600.h index bf6fafc..c7d32fe 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -106,8 +106,6 @@ /* * Command support defines */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_SAVES diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 29be55a..b5ef8b5 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -70,11 +70,7 @@ /*----------------------------------------------------------------------- * Command line configuration. */ -#define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_IO -#define CONFIG_CMD_IRQ #define CONFIG_CMD_PCI -#define CONFIG_CMD_GETTIME #define CONFIG_SCSI #define CONFIG_CMD_ZBOOT diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index ea4b739..e8a0c1c 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -24,12 +24,8 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /*Cmd*/ -#define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_MTDPARTS -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM /*Misc*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -78,7 +74,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO 1 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_FLASH_CFI_MTD diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 30b5b34..1b43620 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -52,7 +52,6 @@ { 4800, 9600, 19200, 38400, 57600, 115200 } /* Command line configuration */ -#define CONFIG_CMD_ENV #define CONFIG_MP /* BOOTP options */ @@ -184,7 +183,6 @@ /* EEPROM */ #ifdef CONFIG_ZYNQMP_EEPROM -# define CONFIG_CMD_EEPROM # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 @@ -271,7 +269,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT /* u-boot is like dtb */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h index 8d018da..4194b66 100644 --- a/include/configs/xilinx_zynqmp_zcu102.h +++ b/include/configs/xilinx_zynqmp_zcu102.h @@ -44,7 +44,6 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_CMD_EEPROM #define CONFIG_ZYNQ_EEPROM_BUS 5 #define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x54 #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20 diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index 2a7a48d..93afb20 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -175,9 +175,6 @@ extern void out32(unsigned int, unsigned long); /* * Command configuration */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PCI /* diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 447fd95..07f2654 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -87,17 +87,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\ CONFIG_SYS_POST_I2C) -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \ - CONFIG_SYS_I2C_DS4510_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_LM90_ADDR, \ - CONFIG_SYS_I2C_PCA9553_ADDR, \ - CONFIG_SYS_I2C_PCA953X_ADDR0, \ - CONFIG_SYS_I2C_PCA953X_ADDR1, \ - CONFIG_SYS_I2C_PCA953X_ADDR2, \ - CONFIG_SYS_I2C_PCA953X_ADDR3, \ - CONFIG_SYS_I2C_PEX8518_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR} /* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */ #define I2C_ADDR_IGNORE_LIST {0x50} @@ -232,9 +221,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 /* I2C DS1631 temperature sensor */ -#define CONFIG_SYS_I2C_DS1621_ADDR 0x48 -#define CONFIG_DTT_DS1621 -#define CONFIG_DTT_SENSORS { 0 } #define CONFIG_SYS_I2C_LM90_ADDR 0x4c /* I2C EEPROM - AT24C128B */ @@ -248,10 +234,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_SYS_M41T11_BASE_YEAR 2000 -/* GPIO/EEPROM/SRAM */ -#define CONFIG_DS4510 -#define CONFIG_SYS_I2C_DS4510_ADDR 0x51 - /* GPIO */ #define CONFIG_PCA953X #define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 @@ -502,12 +484,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command configuration. */ -#define CONFIG_CMD_DS4510 -#define CONFIG_CMD_DS4510_INFO -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index ffc0d00..2645006 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -287,8 +287,6 @@ /* * Command configuration. */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 48f07b0..abbaeaa 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -81,16 +81,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ CONFIG_SYS_POST_I2C) -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \ - CONFIG_SYS_I2C_DS4510_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_LM90_ADDR, \ - CONFIG_SYS_I2C_PCA953X_ADDR0, \ - CONFIG_SYS_I2C_PCA953X_ADDR1, \ - CONFIG_SYS_I2C_PCA953X_ADDR2, \ - CONFIG_SYS_I2C_PCA953X_ADDR3, \ - CONFIG_SYS_I2C_PEX8518_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR} /* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */ #define I2C_ADDR_IGNORE_LIST {0x50} @@ -229,9 +219,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 /* I2C DS1631 temperature sensor */ -#define CONFIG_SYS_I2C_DS1621_ADDR 0x48 -#define CONFIG_DTT_DS1621 -#define CONFIG_DTT_SENSORS { 0 } #define CONFIG_SYS_I2C_LM90_ADDR 0x4c /* I2C EEPROM - AT24C128B */ @@ -245,10 +232,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_SYS_M41T11_BASE_YEAR 2000 -/* GPIO/EEPROM/SRAM */ -#define CONFIG_DS4510 -#define CONFIG_SYS_I2C_DS4510_ADDR 0x51 - /* GPIO */ #define CONFIG_PCA953X #define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 @@ -354,11 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * Command configuration. */ -#define CONFIG_CMD_DS4510 -#define CONFIG_CMD_DS4510_INFO -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index ad4247a..254fc12 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -219,8 +219,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 /* I2C DS7505 temperature sensor */ -#define CONFIG_DTT_LM75 -#define CONFIG_DTT_SENSORS { 0 } #define CONFIG_SYS_I2C_LM75_ADDR 0x48 /* I2C ADT7461 temperature sensor */ @@ -338,9 +336,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * Command configuration. */ -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 77648d7..d9c09b8 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -131,14 +131,6 @@ #define CONFIG_ENV_OFFSET 0x0 #endif /* CONFIG_ENV_IS_IN_EEPROM */ -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - /* * Default environment variables */ @@ -184,7 +176,6 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_DTT #define CONFIG_CMD_PCI #ifdef CONFIG_440EP diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 841cc6d..9b3769b 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -42,7 +42,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_LZMA /* LZMA compression support */ /* * Serial Console Configuration @@ -54,7 +53,6 @@ /* * Bootloader Components Configuration */ -#define CONFIG_CMD_ENV /* * MMC Card Configuration diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 51edd46..df4765c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -145,7 +145,6 @@ /* EEPROM */ #ifdef CONFIG_ZYNQ_EEPROM -# define CONFIG_CMD_EEPROM # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 @@ -260,10 +259,6 @@ #define CONFIG_FPGA #define CONFIG_FPGA_XILINX #define CONFIG_FPGA_ZYNQPL -#define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_FPGA_LOADP -#define CONFIG_CMD_FPGA_LOADBP -#define CONFIG_CMD_FPGA_LOADFS /* FIT support */ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ @@ -284,7 +279,6 @@ /* SPL part */ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds" diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index 1488fd8..808967c 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -14,7 +14,6 @@ #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_I2C1 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_CMD_EEPROM #define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x50 #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0xFA #define CONFIG_DISPLAY diff --git a/include/dtt.h b/include/dtt.h deleted file mode 100644 index 173159d..0000000 --- a/include/dtt.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * (C) Copyright 2001 - * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Digital Thermometers and Thermostats. - */ -#ifndef _DTT_H_ -#define _DTT_H_ - -#if defined(CONFIG_DTT_ADM1021) || \ - defined(CONFIG_DTT_ADT7460) || \ - defined(CONFIG_DTT_DS1621) || \ - defined(CONFIG_DTT_DS1775) || \ - defined(CONFIG_DTT_DS620) || \ - defined(CONFIG_DTT_LM63) || \ - defined(CONFIG_DTT_LM73) || \ - defined(CONFIG_DTT_LM75) || \ - defined(CONFIG_DTT_LM81) - -#define CONFIG_DTT /* We have a DTT */ - -#ifndef CONFIG_DTT_ADM1021 -#define DTT_COMMERCIAL_MAX_TEMP 70 /* 0 - +70 C */ -#define DTT_INDUSTRIAL_MAX_TEMP 85 /* -40 - +85 C */ -#define DTT_AUTOMOTIVE_MAX_TEMP 105 /* -40 - +105 C */ - -#ifndef CONFIG_SYS_DTT_MAX_TEMP -#define CONFIG_SYS_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP -#endif - -#ifndef CONFIG_SYS_DTT_HYSTERESIS -#define CONFIG_SYS_DTT_HYSTERESIS 5 /* 5 C */ -#endif -#endif /* CONFIG_DTT_ADM1021 */ - -extern void dtt_init(void); -extern int dtt_init_one(int); -extern int dtt_read(int sensor, int reg); -extern int dtt_write(int sensor, int reg, int val); -extern int dtt_get_temp(int sensor); -#endif - -#endif /* _DTT_H_ */ diff --git a/include/i2c.h b/include/i2c.h index a88cc7c..2c1643d 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -571,9 +571,6 @@ void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs); #if !defined(CONFIG_SYS_RTC_BUS_NUM) #define CONFIG_SYS_RTC_BUS_NUM 0 #endif -#if !defined(CONFIG_SYS_DTT_BUS_NUM) -#define CONFIG_SYS_DTT_BUS_NUM 0 -#endif #if !defined(CONFIG_SYS_SPD_BUS_NUM) #define CONFIG_SYS_SPD_BUS_NUM 0 #endif diff --git a/include/image.h b/include/image.h index 3f26f9b..8d380e0 100644 --- a/include/image.h +++ b/include/image.h @@ -29,6 +29,9 @@ struct lmb; #define IMAGE_ENABLE_FIT 1 #define IMAGE_ENABLE_OF_LIBFDT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_ENABLE_SHA256_SUPPORT +#define CONFIG_SHA1 +#define CONFIG_SHA256 #define IMAGE_ENABLE_IGNORE 0 #define IMAGE_INDENT_STRING "" @@ -62,24 +65,13 @@ struct lmb; # ifdef CONFIG_SPL_SHA1_SUPPORT # define IMAGE_ENABLE_SHA1 1 # endif -# ifdef CONFIG_SPL_SHA256_SUPPORT -# define IMAGE_ENABLE_SHA256 1 -# endif # else # define CONFIG_CRC32 /* FIT images need CRC32 support */ -# define CONFIG_SHA1 /* and SHA1 */ -# define CONFIG_SHA256 /* and SHA256 */ # define IMAGE_ENABLE_CRC32 1 # define IMAGE_ENABLE_MD5 1 # define IMAGE_ENABLE_SHA1 1 -# define IMAGE_ENABLE_SHA256 1 # endif -#ifdef CONFIG_FIT_DISABLE_SHA256 -#undef CONFIG_SHA256 -#undef IMAGE_ENABLE_SHA256 -#endif - #ifndef IMAGE_ENABLE_CRC32 #define IMAGE_ENABLE_CRC32 0 #endif @@ -92,7 +84,10 @@ struct lmb; #define IMAGE_ENABLE_SHA1 0 #endif -#ifndef IMAGE_ENABLE_SHA256 +#if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \ + defined(CONFIG_SPL_SHA256_SUPPORT) +#define IMAGE_ENABLE_SHA256 1 +#else #define IMAGE_ENABLE_SHA256 0 #endif diff --git a/include/pcmcia.h b/include/pcmcia.h index c8a730c..aaaf651 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -16,7 +16,7 @@ * or try to generate a useful default */ #if defined(CONFIG_CMD_PCMCIA) || \ - (defined(CONFIG_CMD_IDE) && \ + (defined(CONFIG_IDE) && \ (defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) ) ) #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) @@ -268,7 +268,7 @@ extern u_int *pcmcia_pgcrx[]; #define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot]) #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) extern int check_ide_device(int slot); #endif diff --git a/include/tws.h b/include/tws.h deleted file mode 100644 index 7dd5268..0000000 --- a/include/tws.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (C) Copyright 2009 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _TWS_H_ -#define _TWS_H_ - -/* - * Read/Write interface: - * buffer: Where to read/write the data - * len: How many bits to read/write - * - * Returns: 0 on success, not 0 on failure - */ -int tws_read(uchar *buffer, int len); -int tws_write(uchar *buffer, int len); - -#endif /* _TWS_H_ */ diff --git a/lib/Kconfig b/lib/Kconfig index db09151..09670f0 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -148,6 +148,14 @@ config LZ4 frame format currently (2015) implemented in the Linux kernel (generated by 'lz4 -l'). The two formats are incompatible. +config LZMA + bool "Enable LZMA decompression support" + help + This enables support for LZMA (Lempel-Ziv-Markov chain algorithm), + a dictionary compression algorithm that provides a high compression + ratio and fairly fast decompression speed. See also + CONFIG_CMD_LZMADEC which provides a decode command. + config LZO bool endmenu diff --git a/lib/Makefile b/lib/Makefile index 23e9f1e..328b4a2 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -44,9 +44,9 @@ obj-$(CONFIG_BITREVERSE) += bitrev.o obj-y += list_sort.o endif -obj-$(CONFIG_$(SPL_)RSA) += rsa/ -obj-$(CONFIG_$(SPL_)SHA1) += sha1.o -obj-$(CONFIG_$(SPL_)SHA256) += sha256.o +obj-$(CONFIG_RSA) += rsa/ +obj-$(CONFIG_SHA1) += sha1.o +obj-$(CONFIG_SHA256) += sha256.o obj-$(CONFIG_SPL_SAVEENV) += qsort.o obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/ diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 182b300..135706f 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -304,7 +304,8 @@ $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE $(call if_changed,mkimage) quiet_cmd_mksunxiboot = MKSUNXI $@ -cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ +cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \ + --default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@ $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE $(call if_changed,mksunxiboot) diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d1de3f7..e8f49eb 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -383,48 +383,6 @@ CONFIG_CM922T_XA10 CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT CONFIG_CMDLINE_TAG -CONFIG_CMD_DS4510 -CONFIG_CMD_DS4510_INFO -CONFIG_CMD_DS4510_MEM -CONFIG_CMD_DS4510_RST -CONFIG_CMD_DTT -CONFIG_CMD_ECCTEST -CONFIG_CMD_EECONFIG -CONFIG_CMD_EEPROM -CONFIG_CMD_EEPROM_LAYOUT -CONFIG_CMD_ENTERRCM -CONFIG_CMD_ENV -CONFIG_CMD_ENV_CALLBACK -CONFIG_CMD_ENV_FLAGS -CONFIG_CMD_ERRATA -CONFIG_CMD_ESBC_VALIDATE -CONFIG_CMD_ETHSW -CONFIG_CMD_FDC -CONFIG_CMD_FDT_MAX_DUMP -CONFIG_CMD_FPGAD -CONFIG_CMD_FPGA_LOADBP -CONFIG_CMD_FPGA_LOADFS -CONFIG_CMD_FPGA_LOADMK -CONFIG_CMD_FPGA_LOADP -CONFIG_CMD_FUSE -CONFIG_CMD_GETTIME -CONFIG_CMD_GSC -CONFIG_CMD_HASH -CONFIG_CMD_HD44760 -CONFIG_CMD_HD44780 -CONFIG_CMD_HDMIDETECT -CONFIG_CMD_IDE -CONFIG_CMD_IMMAP -CONFIG_CMD_IMXOTP -CONFIG_CMD_IMX_FUSE -CONFIG_CMD_IO -CONFIG_CMD_IOLOOP -CONFIG_CMD_IOTRACE -CONFIG_CMD_IRQ -CONFIG_CMD_JFFS2 -CONFIG_CMD_KGDB -CONFIG_CMD_LOADY -CONFIG_CMD_LZMADEC CONFIG_CMD_MAX6957 CONFIG_CMD_MEM CONFIG_CMD_MFSL @@ -685,22 +643,7 @@ CONFIG_DRIVE_MMC CONFIG_DRIVE_SATA CONFIG_DRIVE_TYPES CONFIG_DRIVE_USB -CONFIG_DS4510 CONFIG_DSP_CLUSTER_START -CONFIG_DTT -CONFIG_DTT_AD7414 -CONFIG_DTT_ADM1021 -CONFIG_DTT_DS1621 -CONFIG_DTT_DS1775 -CONFIG_DTT_DS620 -CONFIG_DTT_HYSTERESIS -CONFIG_DTT_LM63 -CONFIG_DTT_LM75 -CONFIG_DTT_MAX_TEMP -CONFIG_DTT_MIN_TEMP -CONFIG_DTT_PWM_LOOKUPTABLE -CONFIG_DTT_SENSORS -CONFIG_DTT_TACH_LIMIT CONFIG_DUOVERO CONFIG_DV_USBPHY_CTL CONFIG_DWC2_DFLT_SPEED_FULL @@ -765,7 +708,6 @@ CONFIG_EDB93XX_SDCS2 CONFIG_EDB93XX_SDCS3 CONFIG_EEPRO100 CONFIG_EEPRO100_SROM_WRITE -CONFIG_EEPROM_LAYOUT_HELP_STRING CONFIG_EFLASH_PROTSECTORS CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_HCD_INIT_AFTER_RESET @@ -947,7 +889,6 @@ CONFIG_FFUART CONFIG_FILE CONFIG_FIRMWARE_OFFSET CONFIG_FIRMWARE_SIZE -CONFIG_FIT_DISABLE_SHA256 CONFIG_FIXED_PHY CONFIG_FIXED_PHY_ADDR CONFIG_FIXED_SDHCI_ALIGNED_BUFFER @@ -1633,7 +1574,6 @@ CONFIG_LUAN CONFIG_LWMON5 CONFIG_LXT971_NO_SLEEP CONFIG_LYNXKDI -CONFIG_LZMA CONFIG_M41T94_SPI_CS CONFIG_M520x CONFIG_M52277EVB @@ -2352,7 +2292,6 @@ CONFIG_RTC_MV CONFIG_RTC_MXS CONFIG_RTC_PCF8563 CONFIG_RTC_PT7C4338 -CONFIG_RTC_RTC4543 CONFIG_RTC_RV3029 CONFIG_RTC_RX8025 CONFIG_RTC_X1205 @@ -2586,7 +2525,6 @@ CONFIG_SOFT_I2C_GPIO_SCL CONFIG_SOFT_I2C_GPIO_SDA CONFIG_SOFT_I2C_READ_REPEATED_START CONFIG_SOFT_SPI -CONFIG_SOFT_TWS CONFIG_SOURCE CONFIG_SPARSE_RCU_POINTER CONFIG_SPDDRAM_SILENT @@ -3459,12 +3397,6 @@ CONFIG_SYS_DSPI_CTAR4 CONFIG_SYS_DSPI_CTAR5 CONFIG_SYS_DSPI_CTAR6 CONFIG_SYS_DSPI_CTAR7 -CONFIG_SYS_DTT_ADM1021 -CONFIG_SYS_DTT_BUS_NUM -CONFIG_SYS_DTT_HYSTERESIS -CONFIG_SYS_DTT_LOW_TEMP -CONFIG_SYS_DTT_MAX_TEMP -CONFIG_SYS_DTT_MIN_TEMP CONFIG_SYS_DUART_RST CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DV_NOR_BOOT_CFG @@ -3519,7 +3451,6 @@ CONFIG_SYS_EXTBDINFO CONFIG_SYS_EXTRA_ENV_RELOC CONFIG_SYS_EXT_SERIAL_CLOCK CONFIG_SYS_FAST_CLK -CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN CONFIG_SYS_FAULT_ECHO_LINK_DOWN CONFIG_SYS_FAULT_MII_ADDR CONFIG_SYS_FCC_PSMR @@ -4206,13 +4137,10 @@ CONFIG_SYS_I2C_CLK_OFFSET CONFIG_SYS_I2C_DAVINCI CONFIG_SYS_I2C_DIRECT_BUS CONFIG_SYS_I2C_DPMEM_OFFSET -CONFIG_SYS_I2C_DS1621_ADDR -CONFIG_SYS_I2C_DS4510_ADDR CONFIG_SYS_I2C_DSPIC_2_ADDR CONFIG_SYS_I2C_DSPIC_ADDR CONFIG_SYS_I2C_DSPIC_IO_ADDR CONFIG_SYS_I2C_DSPIC_KEYB_ADDR -CONFIG_SYS_I2C_DTT_ADDR CONFIG_SYS_I2C_DVI_ADDR CONFIG_SYS_I2C_DVI_BUS_NUM CONFIG_SYS_I2C_EARLY_INIT @@ -6125,7 +6053,6 @@ CONFIG_TIZEN CONFIG_TI_KEYSTONE_SERDES CONFIG_TI_KSNAV CONFIG_TI_SPI_MMAP -CONFIG_TMU_CMD_DTT CONFIG_TMU_TIMER CONFIG_TOTAL5200 CONFIG_TPL_DRIVERS_MISC_SUPPORT diff --git a/test/py/tests/test_env.py b/test/py/tests/test_env.py index 035dbf5..b7f960c 100644 --- a/test/py/tests/test_env.py +++ b/test/py/tests/test_env.py @@ -164,6 +164,7 @@ def test_env_echo_exists(state_test_env): value = state_test_env.env[var] validate_set(state_test_env, var, value) +@pytest.mark.buildconfigspec('cmd_echo') def test_env_echo_non_existent(state_test_env): """Test echoing a variable that doesn't exist.""" @@ -179,6 +180,7 @@ def test_env_printenv_non_existent(state_test_env): response = c.run_command('printenv %s' % var) assert(response == '## Error: "%s" not defined' % var) +@pytest.mark.buildconfigspec('cmd_echo') def test_env_unset_non_existent(state_test_env): """Test unsetting a nonexistent variable.""" @@ -202,6 +204,7 @@ def test_env_set_existing(state_test_env): set_var(state_test_env, var, value) validate_set(state_test_env, var, value) +@pytest.mark.buildconfigspec('cmd_echo') def test_env_unset_existing(state_test_env): """Test unsetting a variable.""" diff --git a/test/py/tests/test_shell_basics.py b/test/py/tests/test_shell_basics.py index 702e5e2..0024d5f 100644 --- a/test/py/tests/test_shell_basics.py +++ b/test/py/tests/test_shell_basics.py @@ -4,6 +4,10 @@ # Test basic shell functionality, such as commands separate by semi-colons. +import pytest + +pytestmark = pytest.mark.buildconfigspec('cmd_echo') + def test_shell_execute(u_boot_console): """Test any shell command.""" diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c index 0f0b003..db0f10e 100644 --- a/tools/mksunxiboot.c +++ b/tools/mksunxiboot.c @@ -48,8 +48,8 @@ int gen_check_sum(struct boot_file_head *head_p) #define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a)-1) #define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) -#define SUN4I_SRAM_SIZE 0x7600 /* 0x7748+ is used by BROM */ -#define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head)) +#define SUNXI_SRAM_SIZE 0x8000 /* SoC with smaller size are limited before */ +#define SRAM_LOAD_MAX_SIZE (SUNXI_SRAM_SIZE - sizeof(struct boot_file_head)) /* * BROM (at least on A10 and A20) requires NAND-images to be explicitly aligned @@ -70,11 +70,40 @@ int main(int argc, char *argv[]) struct boot_img img; unsigned file_size; int count; + char *tool_name = argv[0]; + char *default_dt = NULL; - if (argc < 2) { - printf("\tThis program makes an input bin file to sun4i " \ - "bootable image.\n" \ - "\tUsage: %s input_file out_putfile\n", argv[0]); + /* a sanity check */ + if ((sizeof(img.header) % 32) != 0) { + fprintf(stderr, "ERROR: the SPL header must be a multiple "); + fprintf(stderr, "of 32 bytes.\n"); + return EXIT_FAILURE; + } + + /* process optional command line switches */ + while (argc >= 2 && argv[1][0] == '-') { + if (strcmp(argv[1], "--default-dt") == 0) { + if (argc >= 3) { + default_dt = argv[2]; + argv += 2; + argc -= 2; + continue; + } + fprintf(stderr, "ERROR: no --default-dt arg\n"); + return EXIT_FAILURE; + } else { + fprintf(stderr, "ERROR: bad option '%s'\n", argv[1]); + return EXIT_FAILURE; + } + } + + if (argc < 3) { + printf("This program converts an input binary file to a sunxi bootable image.\n"); + printf("\nUsage: %s [options] input_file output_file\n", + tool_name); + printf("Where [options] may be:\n"); + printf(" --default-dt arg - 'arg' is the default device tree name\n"); + printf(" (CONFIG_DEFAULT_DEVICE_TREE).\n"); return EXIT_FAILURE; } @@ -122,6 +151,18 @@ int main(int argc, char *argv[]) memcpy(img.header.spl_signature, SPL_SIGNATURE, 3); /* "sunxi" marker */ img.header.spl_signature[3] = SPL_HEADER_VERSION; + if (default_dt) { + if (strlen(default_dt) + 1 <= sizeof(img.header.string_pool)) { + strcpy((char *)img.header.string_pool, default_dt); + img.header.dt_name_offset = + cpu_to_le32(offsetof(struct boot_file_head, + string_pool)); + } else { + printf("WARNING: The SPL header is too small\n"); + printf(" and has no space to store the dt name.\n"); + } + } + gen_check_sum(&img.header); count = write(fd_out, &img, le32_to_cpu(img.header.length)); |