diff options
| -rw-r--r-- | arch/arm/include/asm/arch-zynqmp/hardware.h | 5 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-zynqmp/sys_proto.h | 5 | ||||
| -rw-r--r-- | board/xilinx/zynqmp/zynqmp.c | 25 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp.h | 21 |
4 files changed, 56 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index 15bd519..5d191e8 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -11,6 +11,11 @@ #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 #define ZYNQ_SERIAL_BASEADDR1 0xFF001000 +#define ZYNQ_GEM_BASEADDR0 0xFF0B0000 +#define ZYNQ_GEM_BASEADDR1 0xFF0C0000 +#define ZYNQ_GEM_BASEADDR2 0xFF0D0000 +#define ZYNQ_GEM_BASEADDR3 0xFF0E0000 + #define ZYNQ_SPI_BASEADDR0 0xFF040000 #define ZYNQ_SPI_BASEADDR1 0xFF050000 diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h index 3ca15cb..f5c90d1 100644 --- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h +++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h @@ -8,6 +8,11 @@ #ifndef _ASM_ARCH_SYS_PROTO_H #define _ASM_ARCH_SYS_PROTO_H +/* Setup clk for network */ +static inline void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) +{ +} + int zynq_sdhci_init(unsigned long regbase); int zynq_slcr_get_mio_pin_status(const char *periph); diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f5ff64d..fb43cb0 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -51,6 +51,31 @@ void reset_cpu(ulong addr) { } +int board_eth_init(bd_t *bis) +{ + u32 ret = 0; + +#if defined(CONFIG_ZYNQ_GEM) +# if defined(CONFIG_ZYNQ_GEM0) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0, + CONFIG_ZYNQ_GEM_PHY_ADDR0, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM1) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1, + CONFIG_ZYNQ_GEM_PHY_ADDR1, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM2) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR2, + CONFIG_ZYNQ_GEM_PHY_ADDR2, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM3) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR3, + CONFIG_ZYNQ_GEM_PHY_ADDR3, 0); +# endif +#endif + return ret; +} + #ifdef CONFIG_CMD_MMC int board_mmc_init(bd_t *bd) { diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 8cb276c..9ed8771 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -76,6 +76,16 @@ #define CONFIG_CMD_ELF #define CONFIG_MP +#define CONFIG_CMD_MII + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_MAY_FAIL +#define CONFIG_BOOTP_SERVERIP + /* SPI */ #ifdef CONFIG_ZYNQ_SPI # define CONFIG_SPI_FLASH_SST @@ -130,6 +140,17 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MAXARGS 64 +/* Ethernet driver */ +#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \ + defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3) +# define CONFIG_NET_MULTI +# define CONFIG_ZYNQ_GEM +# define CONFIG_MII +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_PHYLIB +# define CONFIG_PHY_MARVELL +#endif + /* I2C */ #if defined(CONFIG_SYS_I2C_ZYNQ) # define CONFIG_CMD_I2C |