summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/mx53loco/mx53loco.c71
-rw-r--r--include/configs/mx53loco.h14
2 files changed, 85 insertions, 0 deletions
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 46aaeb2..0dcec9b 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -36,6 +36,8 @@
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
+#include <pmic.h>
+#include <dialog_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -291,6 +293,71 @@ int board_mmc_init(bd_t *bis)
}
#endif
+static void setup_iomux_i2c(void)
+{
+ /* I2C1 SDA */
+ mxc_request_iomux(MX53_PIN_CSI0_D8,
+ IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
+ INPUT_CTL_PATH0);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
+ PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
+ PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ /* I2C1 SCL */
+ mxc_request_iomux(MX53_PIN_CSI0_D9,
+ IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
+ INPUT_CTL_PATH0);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
+ PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
+ PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_ODE_OPENDRAIN_ENABLE);
+}
+
+static int power_init(void)
+{
+ unsigned int val, ret;
+ struct pmic *p;
+
+ pmic_init();
+ p = get_pmic();
+
+ /* Set VDDA to 1.25V */
+ val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
+ ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
+
+ ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
+ val |= DA9052_SUPPLY_VBCOREGO;
+ ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val);
+
+ /* Set Vcc peripheral to 1.35V */
+ ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
+ ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
+
+ return ret;
+}
+
+static void clock_1GHz(void)
+{
+ int ret;
+ u32 ref_clk = CONFIG_SYS_MX5_HCLK;
+ /*
+ * After increasing voltage to 1.25V, we can switch
+ * CPU clock to 1GHz and DDR to 400MHz safely
+ */
+ ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to 1GHZ failed\n");
+
+ ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
+ ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to 400MHz failed\n");
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -316,7 +383,11 @@ int print_cpuinfo(void)
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
+ setup_iomux_i2c();
+ if (!power_init())
+ clock_1GHz();
print_cpuinfo();
+
return 0;
}
#endif
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 0778bde..8f43eec 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -41,6 +41,7 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
@@ -85,6 +86,19 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
+/* I2C Configs */
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_MX53_PORT1
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0xfe
+
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_DIALOG_PMIC
+#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1