summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README20
-rw-r--r--common/cmd_sf.c37
-rw-r--r--drivers/mtd/spi/eeprom_m95xxx.c28
3 files changed, 57 insertions, 28 deletions
diff --git a/README b/README
index b6c9d0b..eba6378 100644
--- a/README
+++ b/README
@@ -815,6 +815,7 @@ The following options need to be configured:
(requires CONFIG_CMD_I2C)
CONFIG_CMD_SETGETDCR Support for DCR Register access
(4xx only)
+ CONFIG_CMD_SF * Read/write/erase SPI NOR flash
CONFIG_CMD_SHA1SUM print sha1 memory digest
(requires CONFIG_CMD_MEMORY)
CONFIG_CMD_SOURCE "source" command Support
@@ -2197,6 +2198,25 @@ The following options need to be configured:
allows to read/write in Dataflash via the standard
commands cp, md...
+- Serial Flash support
+ CONFIG_CMD_SF
+
+ Defining this option enables SPI flash commands
+ 'sf probe/read/write/erase/update'.
+
+ Usage requires an initial 'probe' to define the serial
+ flash parameters, followed by read/write/erase/update
+ commands.
+
+ The following defaults may be provided by the platform
+ to handle the common case when only a single serial
+ flash is present on the system.
+
+ CONFIG_SF_DEFAULT_BUS Bus identifier
+ CONFIG_SF_DEFAULT_CS Chip-select
+ CONFIG_SF_DEFAULT_MODE (see include/spi.h)
+ CONFIG_SF_DEFAULT_SPEED in Hz
+
- SystemACE Support:
CONFIG_SYSTEMACE
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 612fd18..98e4162 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -17,6 +17,12 @@
#ifndef CONFIG_SF_DEFAULT_MODE
# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
#endif
+#ifndef CONFIG_SF_DEFAULT_CS
+# define CONFIG_SF_DEFAULT_CS 0
+#endif
+#ifndef CONFIG_SF_DEFAULT_BUS
+# define CONFIG_SF_DEFAULT_BUS 0
+#endif
static struct spi_flash *flash;
@@ -63,27 +69,26 @@ static int sf_parse_len_arg(char *arg, ulong *len)
static int do_spi_flash_probe(int argc, char * const argv[])
{
- unsigned int bus = 0;
- unsigned int cs;
+ unsigned int bus = CONFIG_SF_DEFAULT_BUS;
+ unsigned int cs = CONFIG_SF_DEFAULT_CS;
unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
unsigned int mode = CONFIG_SF_DEFAULT_MODE;
char *endp;
struct spi_flash *new;
- if (argc < 2)
- return -1;
-
- cs = simple_strtoul(argv[1], &endp, 0);
- if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
- return -1;
- if (*endp == ':') {
- if (endp[1] == 0)
- return -1;
-
- bus = cs;
- cs = simple_strtoul(endp + 1, &endp, 0);
- if (*endp != 0)
+ if (argc >= 2) {
+ cs = simple_strtoul(argv[1], &endp, 0);
+ if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
return -1;
+ if (*endp == ':') {
+ if (endp[1] == 0)
+ return -1;
+
+ bus = cs;
+ cs = simple_strtoul(endp + 1, &endp, 0);
+ if (*endp != 0)
+ return -1;
+ }
}
if (argc >= 3) {
@@ -299,7 +304,7 @@ usage:
U_BOOT_CMD(
sf, 5, 1, do_spi_flash,
"SPI flash sub-system",
- "probe [bus:]cs [hz] [mode] - init flash device on given SPI bus\n"
+ "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n"
" and chip select\n"
"sf read addr offset len - read `len' bytes starting at\n"
" `offset' to memory at `addr'\n"
diff --git a/drivers/mtd/spi/eeprom_m95xxx.c b/drivers/mtd/spi/eeprom_m95xxx.c
index ef8ed6f..88b6c34 100644
--- a/drivers/mtd/spi/eeprom_m95xxx.c
+++ b/drivers/mtd/spi/eeprom_m95xxx.c
@@ -37,33 +37,37 @@
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
#endif
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+#ifndef CONFIG_SYS_SPI_WRITE_TOUT
+#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
+#endif
+
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
{
struct spi_slave *slave;
u8 cmd = SPI_EEPROM_READ;
slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000,
CONFIG_DEFAULT_SPI_MODE);
- if(!slave)
+ if (!slave)
return 0;
spi_claim_bus(slave);
/* command */
- if(spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN))
+ if (spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN))
return -1;
/*
- * if alen == 3, addr[0] is the block number, we never use it here. All we
- * need are the lower 16 bits
+ * if alen == 3, addr[0] is the block number, we never use it here.
+ * All we need are the lower 16 bits.
*/
if (alen == 3)
addr++;
/* address, and data */
- if(spi_xfer(slave, 16, addr, NULL, 0))
+ if (spi_xfer(slave, 16, addr, NULL, 0))
return -1;
- if(spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END))
+ if (spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END))
return -1;
spi_release_bus(slave);
@@ -71,7 +75,7 @@ ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
return len;
}
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
{
struct spi_slave *slave;
char buf[3];
@@ -85,7 +89,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
spi_claim_bus(slave);
buf[0] = SPI_EEPROM_WREN;
- if(spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END))
+ if (spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END))
return -1;
buf[0] = SPI_EEPROM_WRITE;
@@ -98,9 +102,9 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
memcpy(buf + 1, addr, alen);
/* command + addr, then data */
- if(spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN))
+ if (spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN))
return -1;
- if(spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END))
+ if (spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END))
return -1;
start = get_timer(0);
@@ -115,7 +119,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
} while (get_timer(start) < CONFIG_SYS_SPI_WRITE_TOUT);
if (buf[1] & 1)
- printf ("*** spi_write: Time out while writing!\n");
+ printf("*** spi_write: Timeout while writing!\n");
spi_release_bus(slave);
spi_free_slave(slave);