summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/README.fsl-ddr9
-rw-r--r--drivers/ddr/fsl/ctrl_regs.c55
-rw-r--r--drivers/ddr/fsl/options.c15
-rw-r--r--include/fsl_ddr_sdram.h11
4 files changed, 82 insertions, 8 deletions
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index cd71ec8..cec5d94 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -123,6 +123,14 @@ ECC can be turned on/off by hwconfig.
Syntax is
hwconfig=fsl_ddr:ecc=off
+
+Memory address parity on/off
+============================
+address parity can be turned on/off by hwconfig.
+Syntax is:
+hwconfig=fsl_ddr:parity=on
+
+
Memory testing options for mpc85xx
==================================
1. Memory test can be done once U-Boot prompt comes up using mtest, or
@@ -143,6 +151,7 @@ platform
hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3,ecc=on
+
Table for dynamic ODT for DDR3
==============================
For single-slot system with quad-rank DIMM and dual-slot system, dynamic ODT may
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 0bfcd34..9073917 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -895,11 +895,15 @@ static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num,
slow = get_ddr_freq(ctrl_num) < 1249000000;
#endif
- if (popts->registered_dimm_en) {
+ if (popts->registered_dimm_en)
rcw_en = 1;
- ap_en = popts->ap_en;
- } else {
+
+ /* DDR4 can have address parity for UDIMM and discrete */
+ if ((CONFIG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4) &&
+ (!popts->registered_dimm_en)) {
ap_en = 0;
+ } else {
+ ap_en = popts->ap_en;
}
x4_en = popts->x4_en ? 1 : 0;
@@ -1135,6 +1139,7 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
unsigned short esdmode5; /* Extended SDRAM mode 5 */
int rtt_park = 0;
bool four_cs = false;
+ const unsigned int mclk_ps = get_memory_clk_period_ps(0);
#if CONFIG_CHIP_SELECTS_PER_CTRL == 4
if ((ddr->cs[0].config & SDRAM_CS_CONFIG_EN) &&
@@ -1150,6 +1155,19 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
esdmode5 = 0x00000400; /* Data mask enabled */
}
+ /* set command/address parity latency */
+ if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ if (mclk_ps >= 935) {
+ /* for DDR4-1600/1866/2133 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK;
+ } else if (mclk_ps >= 833) {
+ /* for DDR4-2400 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK;
+ } else {
+ printf("parity: mclk_ps = %d not supported\n", mclk_ps);
+ }
+ }
+
ddr->ddr_sdram_mode_9 = (0
| ((esdmode4 & 0xffff) << 16)
| ((esdmode5 & 0xffff) << 0)
@@ -1170,6 +1188,20 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
} else {
esdmode5 = 0x00000400;
}
+
+ if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ if (mclk_ps >= 935) {
+ /* for DDR4-1600/1866/2133 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK;
+ } else if (mclk_ps >= 833) {
+ /* for DDR4-2400 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK;
+ } else {
+ printf("parity: mclk_ps = %d not supported\n",
+ mclk_ps);
+ }
+ }
+
switch (i) {
case 1:
ddr->ddr_sdram_mode_11 = (0
@@ -1925,12 +1957,25 @@ static void set_timing_cfg_7(const unsigned int ctrl_num,
const common_timing_params_t *common_dimm)
{
unsigned int txpr, tcksre, tcksrx;
- unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd;
+ unsigned int cke_rst, cksre, cksrx, par_lat = 0, cs_to_cmd;
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
txpr = max(5U, picos_to_mclk(ctrl_num, common_dimm->trfc1_ps + 10000));
tcksre = max(5U, picos_to_mclk(ctrl_num, 10000));
tcksrx = max(5U, picos_to_mclk(ctrl_num, 10000));
- par_lat = 0;
+
+ if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ if (mclk_ps >= 935) {
+ /* parity latency 4 clocks in case of 1600/1866/2133 */
+ par_lat = 4;
+ } else if (mclk_ps >= 833) {
+ /* parity latency 5 clocks for DDR4-2400 */
+ par_lat = 5;
+ } else {
+ printf("parity: mclk_ps = %d not supported\n", mclk_ps);
+ }
+ }
+
cs_to_cmd = 0;
if (txpr <= 200)
diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
index 791d644..d0075ff 100644
--- a/drivers/ddr/fsl/options.c
+++ b/drivers/ddr/fsl/options.c
@@ -1002,8 +1002,19 @@ unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
popts->twot_en = 0;
popts->threet_en = 0;
- /* for RDIMM, address parity enable */
- popts->ap_en = 1;
+ /* for RDIMM and DDR4 UDIMM/discrete memory, address parity enable */
+ if (popts->registered_dimm_en)
+ popts->ap_en = 1; /* 0 = disable, 1 = enable */
+ else
+ popts->ap_en = 0; /* disabled for DDR4 UDIMM/discrete default */
+
+ if (hwconfig_sub_f("fsl_ddr", "parity", buf)) {
+ if (hwconfig_subarg_cmp_f("fsl_ddr", "parity", "on", buf)) {
+ if (popts->registered_dimm_en ||
+ (CONFIG_FSL_SDRAM_TYPE == SDRAM_TYPE_DDR4))
+ popts->ap_en = 1;
+ }
+ }
/*
* BSTTOPRE precharge interval
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 3699c04..cf316a4 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -123,6 +123,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG2_D_INIT 0x00000010
+#define SDRAM_CFG2_AP_EN 0x00000020
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
#define SDRAM_CFG2_ODT_NEVER 0
#define SDRAM_CFG2_ODT_ONLY_WRITE 1
@@ -177,6 +178,14 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
#define DDR_CDR2_VREF_RANGE_2 0x00000040
+/* DDR ERR_DISABLE */
+#define DDR_ERR_DISABLE_APED (1 << 8) /* Address parity error disable */
+
+/* Mode Registers */
+#define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */
+#define DDR_MR5_CA_PARITY_LAT_5_CLK 0x2 /* for DDR4-2400 */
+
+
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
#ifdef CONFIG_SYS_FSL_DDR3L
@@ -343,7 +352,7 @@ typedef struct memctl_options_s {
/* mirrior DIMMs for DDR3 */
unsigned int mirrored_dimm;
unsigned int quad_rank_present;
- unsigned int ap_en; /* address parity enable for RDIMM */
+ unsigned int ap_en; /* address parity enable for RDIMM/DDR4-UDIMM */
unsigned int x4_en; /* enable x4 devices */
/* Global Timing Parameters */