diff options
244 files changed, 3995 insertions, 923 deletions
@@ -783,6 +783,13 @@ The following options need to be configured: Board code has addition modification that it wants to make to the flat device tree before handing it off to the kernel + CONFIG_OF_SYSTEM_SETUP + + Other code has addition modification that it wants to make + to the flat device tree before handing it off to the kernel. + This causes ft_system_setup() to be called before booting + the kernel. + CONFIG_OF_BOOT_CPU This define fills in the correct boot CPU in the boot @@ -3510,7 +3517,7 @@ FIT uImage format: to 128 or 256, although it does not have to be power of 2). default: 4096 - + CONFIG_MTD_UBI_BEB_LIMIT This option specifies the maximum bad physical eraseblocks UBI expects on the MTD device (per 1024 eraseblocks). If the diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b9ac59e..0982117 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -793,6 +793,7 @@ config ARCH_UNIPHIER bool "Panasonic UniPhier platform" select CPU_V7 select SUPPORT_SPL + select OF_CONTROL if !SPL_BUILD endchoice diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index e9a102c..f3eadb4 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -46,11 +46,16 @@ config TARGET_SMDK5420 select SUPPORT_SPL select OF_CONTROL if !SPL_BUILD -config TARGET_PEACH_PIT +config TARGET_PEACH_PI bool "Peach Pi board" select SUPPORT_SPL select OF_CONTROL if !SPL_BUILD +config TARGET_PEACH_PIT + bool "Peach Pit board" + select SUPPORT_SPL + select OF_CONTROL if !SPL_BUILD + endchoice config SYS_SOC diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index c0c95fb..8fab135 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -118,7 +118,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) div = PLL_DIV_1024; else if (proid_is_exynos4412()) div = PLL_DIV_65535; - else if (proid_is_exynos5250() || proid_is_exynos5420()) + else if (proid_is_exynos5250() || proid_is_exynos5420() + || proid_is_exynos5800()) div = PLL_DIV_65536; else return 0; @@ -1581,7 +1582,7 @@ static unsigned long exynos4_get_i2c_clk(void) unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_pll_clk(pllreg); return exynos5_get_pll_clk(pllreg); } else { @@ -1617,7 +1618,7 @@ unsigned long get_i2c_clk(void) unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_pwm_clk(); return clock_get_periph_rate(PERIPH_ID_PWM0); } else { @@ -1630,7 +1631,7 @@ unsigned long get_pwm_clk(void) unsigned long get_uart_clk(int dev_index) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_uart_clk(dev_index); return exynos5_get_uart_clk(dev_index); } else { @@ -1643,7 +1644,7 @@ unsigned long get_uart_clk(int dev_index) unsigned long get_mmc_clk(int dev_index) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_mmc_clk(dev_index); return exynos5_get_mmc_clk(dev_index); } else { @@ -1654,7 +1655,7 @@ unsigned long get_mmc_clk(int dev_index) void set_mmc_clk(int dev_index, unsigned int div) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_set_mmc_clk(dev_index, div); else exynos5_set_mmc_clk(dev_index, div); @@ -1668,7 +1669,7 @@ unsigned long get_lcd_clk(void) if (cpu_is_exynos4()) return exynos4_get_lcd_clk(); else { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_lcd_clk(); else return exynos5_get_lcd_clk(); @@ -1682,7 +1683,7 @@ void set_lcd_clk(void) else { if (proid_is_exynos5250()) exynos5_set_lcd_clk(); - else if (proid_is_exynos5420()) + else if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_set_lcd_clk(); } } @@ -1696,7 +1697,7 @@ void set_mipi_clk(void) int set_spi_clk(int periph_id, unsigned int rate) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_set_spi_clk(periph_id, rate); return exynos5_set_spi_clk(periph_id, rate); } else { diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c index b6a9bc1..0aff3d0 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -971,7 +971,7 @@ static void exynos5420_system_clock_init(void) void system_clock_init(void) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_system_clock_init(); else exynos5250_system_clock_init(); diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c index b86dd2d..7c0b12a 100644 --- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -464,6 +464,16 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) + DMC_OFFSET); pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE; + if (CONFIG_NR_DRAM_BANKS > 4) { + /* Need both controllers. */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2; + mem->chips_per_channel = 2; + mem->chips_to_configure = 2; + } else { + /* 2GB requires a single controller */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1; + } + /* Enable PAUSE for DREX */ setbits_le32(&clk->pause, ENABLE_BIT); @@ -832,6 +842,25 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG); setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG); + /* + * As per Exynos5800 UM ver 0.00 section 17.13.2.1 + * CONCONTROL register bit 3 [update_mode], Exynos5800 does not + * support the PHY initiated update. And it is recommended to set + * this field to 1'b1 during initialization + * + * When we apply PHY-initiated mode, DLL lock value is determined + * once at DMC init time and not updated later when we change the MIF + * voltage based on ASV group in kernel. Applying MC-initiated mode + * makes sure that DLL tracing is ON so that silicon is able to + * compensate the voltage variation. + */ + val = readl(&drex0->concontrol); + val |= CONCONTROL_UPDATE_MODE; + writel(val , &drex0->concontrol); + val = readl(&drex1->concontrol); + val |= CONCONTROL_UPDATE_MODE; + writel(val , &drex1->concontrol); + return 0; } #endif diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 3d95dc3..94d0297 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -837,7 +837,7 @@ static int exynos4x12_pinmux_config(int peripheral, int flags) int exynos_pinmux_config(int peripheral, int flags) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_pinmux_config(peripheral, flags); else if (proid_is_exynos5250()) return exynos5_pinmux_config(peripheral, flags); diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index e1ab3d6..1520d64 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -53,10 +53,37 @@ void exynos5_set_usbhost_phy_ctrl(unsigned int enable) } } +void exynos4412_set_usbhost_phy_ctrl(unsigned int enable) +{ + struct exynos4412_power *power = + (struct exynos4412_power *)samsung_get_base_power(); + + if (enable) { + /* Enabling USBHOST_PHY */ + setbits_le32(&power->usbhost_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + setbits_le32(&power->hsic1_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + setbits_le32(&power->hsic2_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } else { + /* Disabling USBHOST_PHY */ + clrbits_le32(&power->usbhost_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + clrbits_le32(&power->hsic1_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + clrbits_le32(&power->hsic2_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } +} + void set_usbhost_phy_ctrl(unsigned int enable) { if (cpu_is_exynos5()) exynos5_set_usbhost_phy_ctrl(enable); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_set_usbhost_phy_ctrl(enable); } static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable) diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c index ae3ad01..bc237c9 100644 --- a/arch/arm/cpu/armv7/exynos/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -195,10 +195,16 @@ void copy_uboot_to_ram(void) void (*end_bootop_from_emmc)(void); #endif #ifdef CONFIG_USB_BOOTING - u32 (*usb_copy)(void); int is_cr_z_set; unsigned int sec_boot_check; + /* + * Note that older hardware (before Exynos5800) does not expect any + * arguments, but it does not hurt to pass them, so a common function + * prototype is used. + */ + u32 (*usb_copy)(u32 num_of_block, u32 *dst); + /* Read iRAM location to check for secondary USB boot mode */ sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE); if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT) @@ -240,7 +246,7 @@ void copy_uboot_to_ram(void) */ is_cr_z_set = config_branch_prediction(0); usb_copy = get_irom_func(USB_INDEX); - usb_copy(); + usb_copy(0, (u32 *)CONFIG_SYS_TEXT_BASE); config_branch_prediction(is_cr_z_set); break; #endif diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index a0e49d1..49f4032 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -180,6 +180,21 @@ void clock_set_pll1(unsigned int hz) } #endif +void clock_set_pll3(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (clk == 0) { + clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN); + return; + } + + /* PLL3 rate = 3000000 * m */ + writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE | + CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg); +} + unsigned int clock_get_pll5p(void) { struct sunxi_ccm_reg *const ccm = @@ -200,3 +215,15 @@ unsigned int clock_get_pll6(void) int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; return 24000000 * n * k / 2; } + +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz) +{ + int pll = clock_get_pll5p(); + int div = 1; + + while ((pll / div) > hz) + div++; + + writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P | + CCM_DE_CTRL_M(div), clk_cfg); +} diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 16ab6f3..8e949c6 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -127,6 +127,23 @@ void clock_set_pll1(unsigned int clk) } #endif +void clock_set_pll3(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */ + + if (clk == 0) { + clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN); + return; + } + + /* PLL3 rate = 24000000 * n / m */ + writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE | + CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m), + &ccm->pll3_cfg); +} + void clock_set_pll5(unsigned int clk) { struct sunxi_ccm_reg * const ccm = @@ -151,3 +168,15 @@ unsigned int clock_get_pll6(void) int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; return 24000000 * n * k / 2; } + +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz) +{ + int pll = clock_get_pll6() * 2; + int div = 1; + + while ((pll / div) > hz) + div++; + + writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div), + clk_cfg); +} diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c index dc9fdb9..ec8aaa7 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c @@ -428,9 +428,9 @@ static void dramc_clock_output_en(u32 on) #ifdef CONFIG_MACH_SUN4I struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; if (on) - setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); + setbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT); else - clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); + clrbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT); #endif } diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c index 10a6241..699173c 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c @@ -142,9 +142,6 @@ static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para) writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST, &mctl_phy->ptr0); - /* Unknown magic performed by boot0 */ - if ((readl(SUNXI_RTC_BASE + 0x20c) & 3) == 2) - setbits_le32(&mctl_phy->ptr0, 1 << 18); writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1); writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2); diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index fba1cc7..5d682d3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c index 62f5b01..9d51299 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 74129bc..fd1c432 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c index 1843d04..31ee2a2 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index fba1cc7..5d682d3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c index 72ec599..ea0691d 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ba6dec9..01df9a9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ - exynos5420-peach-pit.dtb + exynos5420-peach-pit.dtb \ + exynos5800-peach-pi.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -31,6 +32,10 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra114-dalmore.dtb \ tegra124-jetson-tk1.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-ld4-ref.dtb \ + uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb \ diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 2a1f1dd..c78efec 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -67,4 +67,15 @@ div = <0x3>; index = <4>; }; + + ehci@12580000 { + compatible = "samsung,exynos-ehci"; + reg = <0x12580000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + phy { + compatible = "samsung,exynos-usb-phy"; + reg = <0x125B0000 0x100>; + }; + }; }; diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index 6fd9275..95af025 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -131,11 +131,11 @@ }; ehci@12110000 { - samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */ + samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ }; xhci@12000000 { - samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */ + samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ }; tmu@10060000 { diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts new file mode 100644 index 0000000..8aedf8e --- /dev/null +++ b/arch/arm/dts/exynos5800-peach-pi.dts @@ -0,0 +1,157 @@ +/* + * SAMSUNG/GOOGLE Peach-Pit board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "exynos54xx.dtsi" + +/ { + model = "Samsung/Google Peach Pi board based on Exynos5800"; + + compatible = "google,pit-rev#", "google,pit", + "google,peach", "samsung,exynos5800", "samsung,exynos5"; + + config { + google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */ + hwid = "PIT TEST A-A 7848"; + lazy-init = <1>; + }; + + aliases { + serial0 = "/serial@12C30000"; + console = "/serial@12C30000"; + pmic = "/i2c@12ca0000"; + }; + + dmc { + mem-manuf = "samsung"; + mem-type = "ddr3"; + clock-frequency = <800000000>; + arm-frequency = <1700000000>; + }; + + tmu@10060000 { + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,hw-tripping = <110>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; + }; + + /* MAX77802 is on i2c bus 4 */ + i2c@12ca0000 { + clock-frequency = <400000>; + power-regulator@9 { + compatible = "maxim,max77802-pmic"; + reg = <0x9>; + }; + }; + + i2c@12cd0000 { /* i2c7 */ + clock-frequency = <100000>; + soundcodec@20 { + reg = <0x20>; + compatible = "maxim,max98090-codec"; + }; + + edp-lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + }; + }; + + sound@3830000 { + samsung,codec-type = "max98090"; + }; + + i2c@12e10000 { /* i2c9 */ + clock-frequency = <400000>; + tpm@20 { + compatible = "infineon,slb9645-tpm"; + reg = <0x20>; + }; + }; + + spi@12d30000 { /* spi1 */ + spi-max-frequency = <50000000>; + firmware_storage_spi: flash@0 { + reg = <0>; + + /* + * A region for the kernel to store a panic event + * which the firmware will add to the log. + */ + elog-panic-event-offset = <0x01e00000 0x100000>; + + elog-shrink-size = <0x400>; + elog-full-threshold = <0xc00>; + }; + }; + + spi@12d40000 { /* spi2 */ + spi-max-frequency = <4000000>; + spi-deactivate-delay = <200>; + cros-ec@0 { + reg = <0>; + compatible = "google,cros-ec"; + spi-half-duplex; + spi-max-timeout-ms = <1100>; + spi-frame-header = <0xec>; + ec-interrupt = <&gpio 93 1>; /* GPX1_5 */ + + /* + * This describes the flash memory within the EC. Note + * that the STM32L flash erases to 0, not 0xff. + */ + #address-cells = <1>; + #size-cells = <1>; + flash@8000000 { + reg = <0x08000000 0x20000>; + erase-value = <0>; + }; + }; + }; + + xhci@12000000 { + samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */ + }; + + xhci@12400000 { + samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */ + }; + + fimd@14400000 { + samsung,vl-freq = <60>; + samsung,vl-col = <1920>; + samsung,vl-row = <1080>; + samsung,vl-width = <1920>; + samsung,vl-height = <1080>; + + samsung,vl-clkp; + samsung,vl-dp; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <80>; + samsung,vl-hbpd = <172>; + samsung,vl-hfpd = <60>; + samsung,vl-vspw = <10>; + samsung,vl-vbpd = <25>; + samsung,vl-vfpd = <10>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <3>; + samsung,interface-mode = <1>; + samsung,dp-enabled = <1>; + samsung,dual-lcd-enabled = <0>; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts new file mode 100644 index 0000000..f01189c --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld4.dtsi" + +/ { + model = "Panasonic UniPhier PH1-LD4 Reference Board"; + compatible = "panasonic,ph1-ld4-ref", "panasonic,ph1-ld4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi new file mode 100644 index 0000000..80074c5 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-ld4"; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <36864000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <36864000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <36864000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <36864000>; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts new file mode 100644 index 0000000..52fa81f --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "Panasonic UniPhier PH1-Pro4 Reference Board"; + compatible = "panasonic,ph1-pro4-ref", "panasonic,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi new file mode 100644 index 0000000..dd84269 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-pro4"; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <73728000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <73728000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <73728000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <73728000>; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts new file mode 100644 index 0000000..ac73aad --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld8.dtsi" + +/ { + model = "Panasonic UniPhier PH1-sLD8 Reference Board"; + compatible = "panasonic,ph1-sld8-ref", "panasonic,ph1-sld8"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi new file mode 100644 index 0000000..43a39f5 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-sld8"; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <80000000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <80000000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <80000000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <80000000>; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + }; +}; diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 78aceef..29674ad 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -227,6 +227,13 @@ static inline void s5p_set_cpu_id(void) /* Exynos5420 */ s5p_cpu_id = 0x5420; break; + case 0x422: + /* + * Exynos5800 is a variant of Exynos5420 + * and has product id 0x5422 + */ + s5p_cpu_id = 0x5800; + break; } } @@ -255,6 +262,7 @@ IS_EXYNOS_TYPE(exynos4210, 0x4210) IS_EXYNOS_TYPE(exynos4412, 0x4412) IS_EXYNOS_TYPE(exynos5250, 0x5250) IS_EXYNOS_TYPE(exynos5420, 0x5420) +IS_EXYNOS_TYPE(exynos5800, 0x5800) #define SAMSUNG_BASE(device, base) \ static inline unsigned int __attribute__((no_instrument_function)) \ @@ -265,7 +273,7 @@ static inline unsigned int __attribute__((no_instrument_function)) \ return EXYNOS4X12_##base; \ return EXYNOS4_##base; \ } else if (cpu_is_exynos5()) { \ - if (proid_is_exynos5420()) \ + if (proid_is_exynos5420() || proid_is_exynos5800()) \ return EXYNOS5420_##base; \ return EXYNOS5_##base; \ } \ diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h index ec3f9b6..4990a1a 100644 --- a/arch/arm/include/asm/arch-exynos/dmc.h +++ b/arch/arm/include/asm/arch-exynos/dmc.h @@ -450,6 +450,7 @@ enum mem_manuf { #define CONCONTROL_RD_FETCH_SHIFT 12 #define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT) #define CONCONTROL_AREF_EN_SHIFT 5 +#define CONCONTROL_UPDATE_MODE (1 << 3) /* PRECHCONFIG register field */ #define PRECHCONFIG_TP_CNT_SHIFT 24 diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h index d2d70bd..3800fa9 100644 --- a/arch/arm/include/asm/arch-exynos/ehci.h +++ b/arch/arm/include/asm/arch-exynos/ehci.h @@ -12,6 +12,13 @@ #define CLK_24MHZ 5 +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) +#define RSTCON_HOSTPHY_SWRST (0xf << 3) +#define RSTCON_SWRST (0x1 << 0) + #define HOST_CTRL0_PHYSWRSTALL (1 << 31) #define HOST_CTRL0_COMMONON_N (1 << 9) #define HOST_CTRL0_SIDDQ (1 << 6) @@ -61,6 +68,12 @@ struct exynos_usb_phy { unsigned int usbotgtune; }; +struct exynos4412_usb_phy { + unsigned int usbphyctrl; + unsigned int usbphyclk; + unsigned int usbphyrstcon; +}; + /* Switch on the VBUS power. */ int board_usb_vbus_init(void); diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 02287de..9699954 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -1398,7 +1398,7 @@ static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = { static inline struct gpio_info *get_gpio_data(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_gpio_data; else return exynos5_gpio_data; @@ -1415,7 +1415,7 @@ static inline struct gpio_info *get_gpio_data(void) static inline unsigned int get_bank_num(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return EXYNOS5420_GPIO_NUM_PARTS; else return EXYNOS5_GPIO_NUM_PARTS; diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index e8a98a5..3f97b31 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -210,6 +210,13 @@ struct exynos4_power { unsigned int gps_alive_option; }; +struct exynos4412_power { + unsigned char res1[0x0704]; + unsigned int usbhost_phy_control; + unsigned int hsic1_phy_control; + unsigned int hsic2_phy_control; +}; + struct exynos5_power { unsigned int om_stat; unsigned char res1[0x18]; diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index f2c9687..ba86eea 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -27,7 +27,10 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) #define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) +#define CONFIG_SYS_LS102XA_USB1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) +#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000 #define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 #define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 #define CONFIG_SYS_TSEC3_OFFSET 0x01d90000 @@ -72,6 +75,10 @@ #define DCU_LAYER_MAX_NUM 16 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + #define CONFIG_SYS_FSL_SRDS_1 #ifdef CONFIG_LS102XA @@ -80,6 +87,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #define CONFIG_SYS_FSL_SEC_COMPAT 5 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 7995fe2..b0c267c 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -95,8 +95,6 @@ struct ccsr_gur { u32 sdhcpcr; }; -#define SCFG_SCFGREVCR_REV 0xffffffff -#define SCFG_SCFGREVCR_NOREV 0 #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 @@ -182,7 +180,7 @@ struct ccsr_scfg { u32 etsecmcr; u32 sdhciovserlcr; u32 resv14[61]; - u32 sparecr; + u32 sparecr[8]; }; /* Clocking */ @@ -448,6 +446,7 @@ struct ccsr_ddr { #define CCI400_CTRLORD_TERM_BARRIER 0x00000008 #define CCI400_CTRLORD_EN_BARRIER 0 +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 /* CCI-400 registers */ struct ccsr_cci400 { diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h index ce4186f..8773ce3 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h @@ -83,9 +83,9 @@ static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } -static inline struct s3c2410_nand *s3c2410_get_base_nand(void) +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void) { - return (struct s3c2410_nand *)S3C2410_NAND_BASE; + return (struct s3c24x0_nand *)S3C2410_NAND_BASE; } static inline struct s3c24x0_uart diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h index 3f44bdc..7a525f2 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h @@ -81,9 +81,9 @@ static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } -static inline struct s3c2440_nand *s3c2440_get_base_nand(void) +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void) { - return (struct s3c2440_nand *)S3C2440_NAND_BASE; + return (struct s3c24x0_nand *)S3C2440_NAND_BASE; } static inline struct s3c24x0_uart diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index ed9df34..2dae9fc 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -135,34 +135,33 @@ struct s3c24x0_lcd { }; -#ifdef CONFIG_S3C2410 -/* NAND FLASH (see S3C2410 manual chapter 6) */ -struct s3c2410_nand { - u32 nfconf; - u32 nfcmd; - u32 nfaddr; - u32 nfdata; - u32 nfstat; - u32 nfecc; -}; -#endif -#ifdef CONFIG_S3C2440 -/* NAND FLASH (see S3C2440 manual chapter 6) */ -struct s3c2440_nand { +/* NAND FLASH (see manual chapter 6) */ +struct s3c24x0_nand { u32 nfconf; +#ifndef CONFIG_S3C2410 u32 nfcont; +#endif u32 nfcmd; u32 nfaddr; u32 nfdata; +#ifndef CONFIG_S3C2410 u32 nfeccd0; u32 nfeccd1; u32 nfeccd; +#endif u32 nfstat; +#ifdef CONFIG_S3C2410 + u32 nfecc; +#else u32 nfstat0; u32 nfstat1; -}; + u32 nfmecc0; + u32 nfmecc1; + u32 nfsecc; + u32 nfsblk; + u32 nfeblk; #endif - +}; /* UART (see manual chapter 11) */ struct s3c24x0_uart { diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index b40c16b..64acff3 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -25,9 +25,11 @@ int clock_init(void); int clock_twi_onoff(int port, int state); void clock_set_pll1(unsigned int hz); +void clock_set_pll3(unsigned int hz); void clock_set_pll5(unsigned int hz); unsigned int clock_get_pll5p(void); unsigned int clock_get_pll6(void); +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz); void clock_init_safe(void); void clock_init_uart(void); #endif diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 9dca800..eb88969 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -62,7 +62,7 @@ struct sunxi_ccm_reg { u32 gps_clk_cfg; /* 0xd0 */ u32 spi3_clk_cfg; /* 0xd4 */ u8 res5[0x28]; - u32 dram_clk_cfg; /* 0x100 */ + u32 dram_clk_gate; /* 0x100 */ u32 be0_clk_cfg; /* 0x104 */ u32 be1_clk_cfg; /* 0x108 */ u32 fe0_clk_cfg; /* 0x10c */ @@ -186,12 +186,20 @@ struct sunxi_ccm_reg { /* ahb clock gate bit offset (second register) */ #define AHB_GATE_OFFSET_GMAC 17 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 #define CCM_AHB_GATE_GPS (0x1 << 26) #define CCM_AHB_GATE_SDRAM (0x1 << 14) #define CCM_AHB_GATE_DLL (0x1 << 15) #define CCM_AHB_GATE_ACE (0x1 << 16) +#define CCM_PLL3_CTRL_M(n) (((n) & 0x7f) << 0) +#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 15) +#define CCM_PLL3_CTRL_EN (0x1 << 31) + #define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) #define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) #define CCM_PLL5_CTRL_M_X(n) ((n) - 1) @@ -253,6 +261,34 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_ENABLE (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 + +#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH0_CTRL_RST (0x1 << 30) +#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31) + +#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +/* We leave bit 11 set to 0, so sclk1 == sclk2 */ +#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) +/* Enable / disable both ch1 sclk1 and sclk2 at the same time */ +#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31 | 0x1 << 15) + +#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_HDMI_CTRL_PLL_MASK (3 << 24) +#define CCM_HDMI_CTRL_PLL3 (0 << 24) +#define CCM_HDMI_CTRL_PLL7 (1 << 24) +#define CCM_HDMI_CTRL_PLL3_2X (2 << 24) +#define CCM_HDMI_CTRL_PLL7_2X (3 << 24) +/* No separate ddc gate on sun4i, sun5i and sun7i */ +#define CCM_HDMI_CTRL_DDC_GATE 0 +#define CCM_HDMI_CTRL_GATE (0x1 << 31) + #define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 #define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 @@ -266,4 +302,13 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK 0 #define CCM_USB_CTRL_PHY2_CLK 0 +/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */ +#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE_CTRL_PLL_MASK (3 << 24) +#define CCM_DE_CTRL_PLL3 (0 << 24) +#define CCM_DE_CTRL_PLL7 (1 << 24) +#define CCM_DE_CTRL_PLL5P (2 << 24) +#define CCM_DE_CTRL_RST (1 << 30) +#define CCM_DE_CTRL_GATE (1 << 31) + #endif /* _SUNXI_CLOCK_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index e16a764..3599054 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -176,13 +176,18 @@ struct sunxi_ccm_reg { #define CCM_PLL1_CTRL_MAGIC (0x1 << 16) #define CCM_PLL1_CTRL_EN (0x1 << 31) +#define CCM_PLL3_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_PLL3_CTRL_N(n) ((((n) - 1) & 0x7f) << 8) +#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 24) +#define CCM_PLL3_CTRL_EN (0x1 << 31) + #define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0) #define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4) #define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8) #define CCM_PLL5_CTRL_UPD (0x1 << 20) #define CCM_PLL5_CTRL_EN (0x1 << 31) -#define PLL6_CFG_DEFAULT 0x90041811 +#define PLL6_CFG_DEFAULT 0x90041811 /* 600 MHz */ #define CCM_PLL6_CTRL_N_SHIFT 8 #define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) @@ -193,17 +198,26 @@ struct sunxi_ccm_reg { #define AXI_GATE_OFFSET_DRAM 0 +/* ahb_gate0 offsets */ #define AHB_GATE_OFFSET_USB_OHCI1 30 #define AHB_GATE_OFFSET_USB_OHCI0 29 #define AHB_GATE_OFFSET_USB_EHCI1 27 #define AHB_GATE_OFFSET_USB_EHCI0 26 #define AHB_GATE_OFFSET_MCTL 14 +#define AHB_GATE_OFFSET_GMAC 17 #define AHB_GATE_OFFSET_MMC3 11 #define AHB_GATE_OFFSET_MMC2 10 #define AHB_GATE_OFFSET_MMC1 9 #define AHB_GATE_OFFSET_MMC0 8 #define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) +/* ahb_gate1 offsets */ +#define AHB_GATE_OFFSET_DRC0 25 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 + #define CCM_MMC_CTRL_OSCM24 (0x0 << 24) #define CCM_MMC_CTRL_PLL6 (0x1 << 24) @@ -216,6 +230,12 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9) #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10) +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) + #define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ #define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8) @@ -223,8 +243,35 @@ struct sunxi_ccm_reg { #define CCM_DRAMCLK_CFG_UPD (0x1 << 16) #define CCM_DRAMCLK_CFG_RST (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 + +#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH0_CTRL_MIPI_PLL (4 << 24) +#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31) + +#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31) + +#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_HDMI_CTRL_PLL_MASK (3 << 24) +#define CCM_HDMI_CTRL_PLL3 (0 << 24) +#define CCM_HDMI_CTRL_PLL7 (1 << 24) +#define CCM_HDMI_CTRL_PLL3_2X (2 << 24) +#define CCM_HDMI_CTRL_PLL7_2X (3 << 24) +#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30) +#define CCM_HDMI_CTRL_GATE (0x1 << 31) + #define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */ +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_GMAC 17 #define AHB_RESET_OFFSET_MCTL 14 #define AHB_RESET_OFFSET_MMC3 11 #define AHB_RESET_OFFSET_MMC2 10 @@ -232,10 +279,28 @@ struct sunxi_ccm_reg { #define AHB_RESET_OFFSET_MMC0 8 #define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_DRC0 25 +#define AHB_RESET_OFFSET_DE_BE0 12 +#define AHB_RESET_OFFSET_HDMI 11 +#define AHB_RESET_OFFSET_LCD1 5 +#define AHB_RESET_OFFSET_LCD0 4 + /* apb2 reset */ #define APB2_RESET_UART_SHIFT (16) #define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) #define APB2_RESET_TWI_SHIFT (0) #define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) +/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */ +#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE_CTRL_PLL_MASK (0xf << 24) +#define CCM_DE_CTRL_PLL3 (0 << 24) +#define CCM_DE_CTRL_PLL7 (1 << 24) +#define CCM_DE_CTRL_PLL6_2X (2 << 24) +#define CCM_DE_CTRL_PLL8 (3 << 24) +#define CCM_DE_CTRL_PLL9 (4 << 24) +#define CCM_DE_CTRL_PLL10 (5 << 24) +#define CCM_DE_CTRL_GATE (1 << 31) + #endif /* _SUNXI_CLOCK_SUN6I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index bdee89e..2c92b5c 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -99,9 +99,13 @@ #define SUNXI_SCR_BASE 0x01c2c400 +#ifndef CONFIG_MACH_SUN6I #define SUNXI_GPS_BASE 0x01c30000 #define SUNXI_MALI400_BASE 0x01c40000 #define SUNXI_GMAC_BASE 0x01c50000 +#else +#define SUNXI_GMAC_BASE 0x01c30000 +#endif #define SUNXI_DRAM_COM_BASE 0x01c62000 #define SUNXI_DRAM_CTL0_BASE 0x01c63000 diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h new file mode 100644 index 0000000..ddb71c1 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/display.h @@ -0,0 +1,187 @@ +/* + * Sunxi platform display controller register and constant defines + * + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DISPLAY_H +#define _SUNXI_DISPLAY_H + +struct sunxi_de_be_reg { + u8 res0[0x800]; /* 0x000 */ + u32 mode; /* 0x800 */ + u32 backcolor; /* 0x804 */ + u32 disp_size; /* 0x808 */ + u8 res1[0x4]; /* 0x80c */ + u32 layer0_size; /* 0x810 */ + u32 layer1_size; /* 0x814 */ + u32 layer2_size; /* 0x818 */ + u32 layer3_size; /* 0x81c */ + u32 layer0_pos; /* 0x820 */ + u32 layer1_pos; /* 0x824 */ + u32 layer2_pos; /* 0x828 */ + u32 layer3_pos; /* 0x82c */ + u8 res2[0x10]; /* 0x830 */ + u32 layer0_stride; /* 0x840 */ + u32 layer1_stride; /* 0x844 */ + u32 layer2_stride; /* 0x848 */ + u32 layer3_stride; /* 0x84c */ + u32 layer0_addr_low32b; /* 0x850 */ + u32 layer1_addr_low32b; /* 0x854 */ + u32 layer2_addr_low32b; /* 0x858 */ + u32 layer3_addr_low32b; /* 0x85c */ + u32 layer0_addr_high4b; /* 0x860 */ + u32 layer1_addr_high4b; /* 0x864 */ + u32 layer2_addr_high4b; /* 0x868 */ + u32 layer3_addr_high4b; /* 0x86c */ + u32 reg_ctrl; /* 0x870 */ + u8 res3[0xc]; /* 0x874 */ + u32 color_key_max; /* 0x880 */ + u32 color_key_min; /* 0x884 */ + u32 color_key_config; /* 0x888 */ + u8 res4[0x4]; /* 0x88c */ + u32 layer0_attr0_ctrl; /* 0x890 */ + u32 layer1_attr0_ctrl; /* 0x894 */ + u32 layer2_attr0_ctrl; /* 0x898 */ + u32 layer3_attr0_ctrl; /* 0x89c */ + u32 layer0_attr1_ctrl; /* 0x8a0 */ + u32 layer1_attr1_ctrl; /* 0x8a4 */ + u32 layer2_attr1_ctrl; /* 0x8a8 */ + u32 layer3_attr1_ctrl; /* 0x8ac */ +}; + +struct sunxi_lcdc_reg { + u32 ctrl; /* 0x00 */ + u32 int0; /* 0x04 */ + u32 int1; /* 0x08 */ + u8 res0[0x04]; /* 0x0c */ + u32 frame_ctrl; /* 0x10 */ + u8 res1[0x2c]; /* 0x14 */ + u32 tcon0_ctrl; /* 0x40 */ + u32 tcon0_dclk; /* 0x44 */ + u32 tcon0_basic_timing0; /* 0x48 */ + u32 tcon0_basic_timing1; /* 0x4c */ + u32 tcon0_basic_timing2; /* 0x50 */ + u32 tcon0_basic_timing3; /* 0x54 */ + u32 tcon0_hv_intf; /* 0x58 */ + u8 res2[0x04]; /* 0x5c */ + u32 tcon0_cpu_intf; /* 0x60 */ + u32 tcon0_cpu_wr_dat; /* 0x64 */ + u32 tcon0_cpu_rd_dat0; /* 0x68 */ + u32 tcon0_cpu_rd_dat1; /* 0x6c */ + u32 tcon0_ttl_timing0; /* 0x70 */ + u32 tcon0_ttl_timing1; /* 0x74 */ + u32 tcon0_ttl_timing2; /* 0x78 */ + u32 tcon0_ttl_timing3; /* 0x7c */ + u32 tcon0_ttl_timing4; /* 0x80 */ + u32 tcon0_lvds_intf; /* 0x84 */ + u32 tcon0_io_polarity; /* 0x88 */ + u32 tcon0_io_tristate; /* 0x8c */ + u32 tcon1_ctrl; /* 0x90 */ + u32 tcon1_timing_source; /* 0x94 */ + u32 tcon1_timing_scale; /* 0x98 */ + u32 tcon1_timing_out; /* 0x9c */ + u32 tcon1_timing_h; /* 0xa0 */ + u32 tcon1_timing_v; /* 0xa4 */ + u32 tcon1_timing_sync; /* 0xa8 */ + u8 res3[0x44]; /* 0xac */ + u32 tcon1_io_polarity; /* 0xf0 */ + u32 tcon1_io_tristate; /* 0xf4 */ +}; + +struct sunxi_hdmi_reg { + u32 version_id; /* 0x000 */ + u32 ctrl; /* 0x004 */ + u32 irq; /* 0x008 */ + u32 hpd; /* 0x00c */ + u32 video_ctrl; /* 0x010 */ + u32 video_size; /* 0x014 */ + u32 video_bp; /* 0x018 */ + u32 video_fp; /* 0x01c */ + u32 video_spw; /* 0x020 */ + u32 video_polarity; /* 0x024 */ + u8 res0[0x1d8]; /* 0x028 */ + u32 pad_ctrl0; /* 0x200 */ + u32 pad_ctrl1; /* 0x204 */ + u32 pll_ctrl; /* 0x208 */ + u32 pll_dbg0; /* 0x20c */ +}; + +/* + * DE-BE register constants. + */ +#define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0) +#define SUNXI_DE_BE_HEIGHT(y) (((y) - 1) << 16) +#define SUNXI_DE_BE_MODE_ENABLE (1 << 0) +#define SUNXI_DE_BE_MODE_START (1 << 1) +#define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8) +#define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5) +#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0) +#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8) + +/* + * LCDC register constants. + */ +#define SUNXI_LCDC_X(x) (((x) - 1) << 16) +#define SUNXI_LCDC_Y(y) (((y) - 1) << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_MASK (1 << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_TCON0 (0 << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_TCON1 (1 << 0) +#define SUNXI_LCDC_CTRL_TCON_ENABLE (1 << 31) +#define SUNXI_LCDC_TCON0_DCLK_ENABLE (0xf << 28) +#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4) +#define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31) +#define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0) +#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n) (((n) - 1) << 16) +#define SUNXI_LCDC_TCON1_TIMING_V_BP(n) (((n) - 1) << 0) +#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n) (((n) * 2) << 16) + +/* + * HDMI register constants. + */ +#define SUNXI_HDMI_X(x) (((x) - 1) << 0) +#define SUNXI_HDMI_Y(y) (((y) - 1) << 16) +#define SUNXI_HDMI_CTRL_ENABLE (1 << 31) +#define SUNXI_HDMI_IRQ_STATUS_FIFO_UF (1 << 0) +#define SUNXI_HDMI_IRQ_STATUS_FIFO_OF (1 << 1) +#define SUNXI_HDMI_IRQ_STATUS_BITS 0x73 +#define SUNXI_HDMI_HPD_DETECT (1 << 0) +#define SUNXI_HDMI_VIDEO_CTRL_ENABLE (1 << 31) +#define SUNXI_HDMI_VIDEO_POL_HOR (1 << 0) +#define SUNXI_HDMI_VIDEO_POL_VER (1 << 1) +#define SUNXI_HDMI_VIDEO_POL_TX_CLK (0x3e0 << 16) + +#ifdef CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PAD_CTRL0_HDP 0x7e80000f +#define SUNXI_HDMI_PAD_CTRL0_RUN 0x7e8000ff +#else +#define SUNXI_HDMI_PAD_CTRL0_HDP 0xfe800000 +#define SUNXI_HDMI_PAD_CTRL0_RUN 0xfe800000 +#endif + +#ifdef CONFIG_MACH_SUN4I +#define SUNXI_HDMI_PAD_CTRL1 0x00d8c820 +#elif defined CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PAD_CTRL1 0x01ded030 +#else +#define SUNXI_HDMI_PAD_CTRL1 0x00d8c830 +#endif +#define SUNXI_HDMI_PAD_CTRL1_HALVE (1 << 6) + +#ifdef CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PLL_CTRL 0xba48a308 +#define SUNXI_HDMI_PLL_CTRL_DIV(n) (((n) - 1) << 4) +#else +#define SUNXI_HDMI_PLL_CTRL 0xfa4ef708 +#define SUNXI_HDMI_PLL_CTRL_DIV(n) ((n) << 4) +#endif +#define SUNXI_HDMI_PLL_CTRL_DIV_MASK (0xf << 4) + +#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21) +#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21) + +int sunxi_simplefb_setup(void *blob); + +#endif /* _SUNXI_DISPLAY_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index c734cf0..366c0dc 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -134,6 +134,7 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_OUTPUT 1 #define SUNXI_GPA0_EMAC 2 +#define SUN6I_GPA0_GMAC 2 #define SUN7I_GPA0_GMAC 5 #define SUNXI_GPB0_TWI0 2 diff --git a/arch/arm/include/asm/arch-uniphier/gpio.h b/arch/arm/include/asm/arch-uniphier/gpio.h new file mode 100644 index 0000000..1fc4e19 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/gpio.h @@ -0,0 +1,6 @@ +/* + * Dummy header file to enable CONFIG_OF_CONTROL. + * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. + * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable + * OF_CONTROL must have arch/gpio.h even if GPIO is not supported. + */ diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index c69d064..438f128 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -17,6 +17,14 @@ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif + +#if defined(CONFIG_U_QE) + u32 qe_clk; + u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; +#endif /* CONFIG_U_QE */ + #ifdef CONFIG_AT91FAMILY /* "static data" needed by at91's clock.c */ unsigned long cpu_clk_rate_hz; diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S index 68e59b5..384ea26 100644 --- a/arch/mips/cpu/mips32/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -136,10 +136,11 @@ reset: /* Set up temporary stack */ li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET + move fp, sp la t9, board_init_f jr t9 - nop + move ra, zero /* * void relocate_code (addr_sp, gd, addr_moni) @@ -155,6 +156,7 @@ reset: .ent relocate_code relocate_code: move sp, a0 # set new stack pointer + move fp, sp move s0, a1 # save gd in s0 move s2, a2 # save destination address in s2 @@ -260,8 +262,9 @@ in_ram: addi t1, 4 move a0, s0 # a0 <-- gd + move a1, s2 la t9, board_init_r jr t9 - move a1, s2 + move ra, zero .end relocate_code diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S index 92954e1..6ff714e 100644 --- a/arch/mips/cpu/mips64/start.S +++ b/arch/mips/cpu/mips64/start.S @@ -130,10 +130,11 @@ reset: /* Set up temporary stack */ dli sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET + move fp, sp dla t9, board_init_f jr t9 - nop + move ra, zero /* * void relocate_code (addr_sp, gd, addr_moni) @@ -149,6 +150,7 @@ reset: .ent relocate_code relocate_code: move sp, a0 # set new stack pointer + move fp, sp move s0, a1 # save gd in s0 move s2, a2 # save destination address in s2 @@ -254,8 +256,9 @@ in_ram: daddi t1, 8 move a0, s0 # a0 <-- gd + move a1, s2 dla t9, board_init_r jr t9 - move a1, s2 + move ra, zero .end relocate_code diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index e483e86..7f9b653 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -5,9 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SYS_GENERIC_BOARD -obj-y += board.o -endif obj-y += io.o obj-$(CONFIG_CMD_BOOTM) += bootm.o diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c deleted file mode 100644 index 3feb020..0000000 --- a/arch/mips/lib/board.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <serial.h> -#include <stdio_dev.h> -#include <version.h> -#include <net.h> -#include <environment.h> -#include <nand.h> -#include <onenand_uboot.h> -#include <spi.h> - -#ifdef CONFIG_BITBANGMII -#include <miiphy.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -ulong monitor_flash_len; - -static char *failed = "*** failed ***\n"; - -int __board_early_init_f(void) -{ - /* - * Nothing to do in this dummy implementation - */ - return 0; -} -int board_early_init_f(void) - __attribute__((weak, alias("__board_early_init_f"))); - -static int init_func_ram(void) -{ -#ifdef CONFIG_BOARD_TYPES - int board_type = gd->board_type; -#else - int board_type = 0; /* use dummy arg */ -#endif - puts("DRAM: "); - - gd->ram_size = initdram(board_type); - if (gd->ram_size > 0) { - print_size(gd->ram_size, "\n"); - return 0; - } - puts(failed); - return 1; -} - -static int display_banner(void) -{ - - printf("\n\n%s\n\n", version_string); - return 0; -} - -#ifndef CONFIG_SYS_NO_FLASH -static void display_flash_config(ulong size) -{ - puts("Flash: "); - print_size(size, "\n"); -} -#endif - -static int init_baudrate(void) -{ - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - return 0; -} - - -/* - * Breath some life into the board... - * - * The first part of initialization is running from Flash memory; - * its main purpose is to initialize the RAM so that we - * can relocate the monitor code to RAM. - */ - -/* - * All attempts to come up with a "common" initialization sequence - * that works for all boards and architectures failed: some of the - * requirements are just _too_ different. To get rid of the resulting - * mess of board dependend #ifdef'ed code we now make the whole - * initialization sequence configurable to the user. - * - * The requirements for any new initalization function is simple: it - * receives a pointer to the "global data" structure as it's only - * argument, and returns an integer return code, where 0 means - * "continue" and != 0 means "fatal error, hang the system". - */ -typedef int (init_fnc_t)(void); - -init_fnc_t *init_sequence[] = { - board_early_init_f, - timer_init, - env_init, /* initialize environment */ - init_baudrate, /* initialize baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, - display_banner, /* say that we are here */ - checkboard, - init_func_ram, - NULL, -}; - - -void board_init_f(ulong bootflag) -{ - gd_t gd_data, *id; - bd_t *bd; - init_fnc_t **init_fnc_ptr; - ulong addr, addr_sp, len; - ulong *s; - - /* Pointer is writable since we allocated a register for it. - */ - gd = &gd_data; - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("" : : : "memory"); - - memset((void *)gd, 0, sizeof(gd_t)); - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) - hang(); - } - - /* - * Now that we have DRAM mapped and working, we can - * relocate the code and continue running from DRAM. - */ - addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; - - /* We can reserve some RAM "on top" here. - */ - - /* round down to next 4 kB limit. - */ - addr &= ~(4096 - 1); - debug("Top of RAM usable for U-Boot at: %08lx\n", addr); - - /* Reserve memory for U-Boot code, data & bss - * round down to next 16 kB limit - */ - len = bss_end() - CONFIG_SYS_MONITOR_BASE; - addr -= len; - addr &= ~(16 * 1024 - 1); - - debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); - - /* Reserve memory for malloc() arena. - */ - addr_sp = addr - TOTAL_MALLOC_LEN; - debug("Reserving %dk for malloc() at: %08lx\n", - TOTAL_MALLOC_LEN >> 10, addr_sp); - - /* - * (permanently) allocate a Board Info struct - * and a permanent copy of the "global" data - */ - addr_sp -= sizeof(bd_t); - bd = (bd_t *)addr_sp; - gd->bd = bd; - debug("Reserving %zu Bytes for Board Info at: %08lx\n", - sizeof(bd_t), addr_sp); - - addr_sp -= sizeof(gd_t); - id = (gd_t *)addr_sp; - debug("Reserving %zu Bytes for Global Data at: %08lx\n", - sizeof(gd_t), addr_sp); - - /* Reserve memory for boot params. - */ - addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN; - bd->bi_boot_params = addr_sp; - debug("Reserving %dk for boot params() at: %08lx\n", - CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp); - - /* - * Finally, we set up a new (bigger) stack. - * - * Leave some safety gap for SP, force alignment on 16 byte boundary - * Clear initial stack frame - */ - addr_sp -= 16; - addr_sp &= ~0xF; - s = (ulong *)addr_sp; - *s-- = 0; - *s-- = 0; - addr_sp = (ulong)s; - debug("Stack Pointer at: %08lx\n", addr_sp); - - /* - * Save local variables to board info struct - */ - bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM */ - bd->bi_memsize = gd->ram_size; /* size of DRAM in bytes */ - - memcpy(id, (void *)gd, sizeof(gd_t)); - - relocate_code(addr_sp, id, addr); - - /* NOTREACHED - relocate_code() does not return */ -} - -/* - * This is the next part if the initialization sequence: we are now - * running from RAM and have a "normal" C environment, i. e. global - * data can be written, BSS has been cleared, the stack size in not - * that critical any more, etc. - */ - -void board_init_r(gd_t *id, ulong dest_addr) -{ -#ifndef CONFIG_SYS_NO_FLASH - ulong size; -#endif - bd_t *bd; - - gd = id; - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - - debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); - - gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; - - monitor_flash_len = image_copy_end() - dest_addr; - - serial_initialize(); - - bd = gd->bd; - - /* The Malloc area is immediately below the monitor copy in DRAM */ - mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off - - TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); - -#ifndef CONFIG_SYS_NO_FLASH - /* configure available FLASH banks */ - size = flash_init(); - display_flash_config(size); - bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; - bd->bi_flashsize = size; - -#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE - bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */ -#else - bd->bi_flashoffset = 0; -#endif -#else - bd->bi_flashstart = 0; - bd->bi_flashsize = 0; - bd->bi_flashoffset = 0; -#endif - -#ifdef CONFIG_CMD_NAND - puts("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#if defined(CONFIG_CMD_ONENAND) - onenand_init(); -#endif - - /* relocate environment function pointers etc. */ - env_relocate(); - -#if defined(CONFIG_PCI) - /* - * Do pci configuration - */ - pci_init(); -#endif - -/** leave this here (after malloc(), environment and PCI are working) **/ - /* Initialize stdio devices */ - stdio_init(); - - jumptable_init(); - - /* Initialize the console (after the relocation and devices init) */ - console_init_r(); -/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/ - - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - -#ifdef CONFIG_CMD_SPI - puts("SPI: "); - spi_init(); /* go init the SPI */ - puts("ready\n"); -#endif - -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r(); -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) - puts("Net: "); - eth_initialize(gd->bd); -#endif - - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) - main_loop(); - - /* NOTREACHED - no way out of command loop except booting */ -} diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 71bb0d2..e0722d2 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -6,10 +6,7 @@ */ #include <common.h> -#include <command.h> #include <image.h> -#include <u-boot/zlib.h> -#include <asm/byteorder.h> #include <asm/addrspace.h> DECLARE_GLOBAL_DATA_PTR; @@ -52,6 +49,20 @@ void arch_lmb_reserve(struct lmb *lmb) lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp); } +static int boot_setup_linux(bootm_headers_t *images) +{ + int ret; + ulong rd_len; + + rd_len = images->rd_end - images->rd_start; + ret = boot_ramdisk_high(&images->lmb, images->rd_start, + rd_len, &images->initrd_start, &images->initrd_end); + if (ret) + return ret; + + return 0; +} + static void linux_cmdline_init(void) { linux_argc = 1; @@ -224,6 +235,8 @@ static void boot_jump_linux(bootm_headers_t *images) int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { + int ret; + /* No need for those on MIPS */ if (flag & BOOTM_STATE_OS_BD_T) return -1; @@ -243,6 +256,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], return 0; } + ret = boot_setup_linux(images); + if (ret) + return ret; + boot_cmdline_linux(images); boot_prep_linux(images); boot_jump_linux(images); diff --git a/arch/nios2/cpu/fdt.c b/arch/nios2/cpu/fdt.c index 4d88f16..5024682 100644 --- a/arch/nios2/cpu/fdt.c +++ b/arch/nios2/cpu/fdt.c @@ -18,11 +18,13 @@ DECLARE_GLOBAL_DATA_PTR; -void __ft_board_setup(void *blob, bd_t *bd) +int __ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } -void ft_board_setup(void *blob, bd_t *bd) \ +int ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); void ft_cpu_setup(void *blob, bd_t *bd) @@ -32,5 +34,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) * Note: aliases in the dts are required for this */ fdt_fixup_ethernet(blob); + + return 0; } #endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */ diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 3a04a89..fe3eb06 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -9,6 +9,7 @@ #include <linux/compiler.h> #include <asm/fsl_errata.h> #include <asm/processor.h> +#include <fsl_usb.h> #include "fsl_corenet_serdes.h" #ifdef CONFIG_SYS_FSL_ERRATUM_A004849 @@ -293,6 +294,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (has_erratum_a007075()) puts("Work-around for Erratum A007075 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A007798 + if (has_erratum_a007798()) + puts("Work-around for Erratum A007798 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c index bd905d1..eef9c5a 100644 --- a/arch/powerpc/cpu/ppc4xx/fdt.c +++ b/arch/powerpc/cpu/ppc4xx/fdt.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; -void __ft_board_setup(void *blob, bd_t *bd) +int __ft_board_setup(void *blob, bd_t *bd) { int rc; int i; @@ -60,8 +60,11 @@ void __ft_board_setup(void *blob, bd_t *bd) printf("Unable to update property EBC mappings, err=%s\n", fdt_strerror(rc)); } + + return 0; } -void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); +int ft_board_setup(void *blob, bd_t *bd) + __attribute__((weak, alias("__ft_board_setup"))); /* * Fixup all PCIe nodes by setting the device_type property diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4c1774f..7860b40 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -678,6 +678,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A006379 #define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 +#define CONFIG_SYS_FSL_ERRATUM_A007798 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_PCI_VER_3_X diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h index 64da4bb..b9e2fb0 100644 --- a/arch/powerpc/include/asm/fsl_errata.h +++ b/arch/powerpc/include/asm/fsl_errata.h @@ -26,59 +26,4 @@ static inline bool has_erratum_a006379(void) return false; } #endif - -#ifdef CONFIG_SYS_FSL_ERRATUM_A006261 -static inline bool has_erratum_a006261(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P2041: - case SVR_P2040: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1); - case SVR_P3041: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || - IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1); - case SVR_P5010: - case SVR_P5020: - case SVR_P5021: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T4240: - case SVR_T4160: - case SVR_T4080: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T1040: - return IS_SVR_REV(svr, 1, 0); - case SVR_T2080: - case SVR_T2081: - return IS_SVR_REV(svr, 1, 0); - case SVR_P5040: - return IS_SVR_REV(svr, 1, 0); - } - - return false; -} -#endif - -static inline bool has_erratum_a007075(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_B4860: - case SVR_B4420: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0); - case SVR_P4080: - return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); - } - return false; -} #endif diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index f60cb0a..8e0e190 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -71,6 +71,22 @@ enum srds_prtcl { INTERLAKEN, QSGMII_SW1_A, /* Indicates ports on L2 Switch */ QSGMII_SW1_B, + SGMII_2500_FM1_DTSEC1, + SGMII_2500_FM1_DTSEC2, + SGMII_2500_FM1_DTSEC3, + SGMII_2500_FM1_DTSEC4, + SGMII_2500_FM1_DTSEC5, + SGMII_2500_FM1_DTSEC6, + SGMII_2500_FM1_DTSEC9, + SGMII_2500_FM1_DTSEC10, + SGMII_2500_FM2_DTSEC1, + SGMII_2500_FM2_DTSEC2, + SGMII_2500_FM2_DTSEC3, + SGMII_2500_FM2_DTSEC4, + SGMII_2500_FM2_DTSEC5, + SGMII_2500_FM2_DTSEC6, + SGMII_2500_FM2_DTSEC9, + SGMII_2500_FM2_DTSEC10, }; enum srds { diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index b96ba81..ee1681b 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -392,9 +392,11 @@ int misc_init_r(void) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t * bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c index d3d4c18..c5d161b 100644 --- a/board/a4m072/a4m072.c +++ b/board/a4m072/a4m072.c @@ -171,10 +171,11 @@ void pci_init_board(void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 79d4bab..c5cc4ff 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -490,9 +490,9 @@ int misc_init_r(void) #endif /* !defined(CONFIG_ARCHES) */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -extern void __ft_board_setup(void *blob, bd_t *bd); +extern int __ft_board_setup(void *blob, bd_t *bd); -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { __ft_board_setup(blob, bd); @@ -515,5 +515,7 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status", "disabled", sizeof("disabled"), 1); } + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 53f9b34..91c6cbf 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -10,6 +10,7 @@ */ #include <common.h> +#include <errno.h> #include <libfdt.h> #include <fdt_support.h> #include <asm/ppc4xx.h> @@ -363,7 +364,7 @@ void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) * On NAND-booting sequoia, we need to patch the chips select numbers * in the dtb (CS0 - NAND, CS3 - NOR) */ -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int rc; int len; @@ -381,15 +382,14 @@ void ft_board_setup(void *blob, bd_t *bd) prop = fdt_get_property_w(blob, nodeoffset, "reg", &len); if (prop == NULL) { printf("Unable to update NOR chip select for NAND booting\n"); - return; + return -FDT_ERR_NOTFOUND; } reg = (u32 *)&prop->data[0]; reg[0] = 3; rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1); if (rc) { - printf("Unable to update property NOR mappings, err=%s\n", - fdt_strerror(rc)); - return; + printf("Unable to update property NOR mappings\n"); + return rc; } /* And now configure NAND chip select to 0 instead of 3 */ @@ -398,15 +398,16 @@ void ft_board_setup(void *blob, bd_t *bd) prop = fdt_get_property_w(blob, nodeoffset, "reg", &len); if (prop == NULL) { printf("Unable to update NDFC chip select for NAND booting\n"); - return; + return len; } reg = (u32 *)&prop->data[0]; reg[0] = 0; rc = fdt_find_and_setprop(blob, path, "reg", reg, 3 * sizeof(u32), 1); if (rc) { - printf("Unable to update property NDFC mappings, err=%s\n", - fdt_strerror(rc)); - return; + printf("Unable to update property NDFC mapping\n"); + return rc; } + + return 0; } #endif /* CONFIG_SYS_RAMBOOT */ diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 048aa6c..5276907 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -359,9 +359,11 @@ int last_stage_init(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); ft_blob_update(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 09e285b..84e3643 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -458,7 +458,7 @@ int cm_fx6_setup_ecspi(void) { return 0; } #endif #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { uint8_t enetaddr[6]; @@ -467,6 +467,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_find_and_setprop(blob, "/fec", "local-mac-address", enetaddr, 6, 1); } + + return 0; } #endif diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index b1a067d..2c2530a 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -121,7 +121,7 @@ int board_mmc_init(bd_t *bis) #ifdef CONFIG_USB_HOST_ETHER -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { uint8_t enetaddr[6]; @@ -130,6 +130,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address", enetaddr, 6, 1); } + + return 0; } static void generate_mac_addr(uint8_t *enetaddr) diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index c740669..a15a9ed 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -107,8 +107,10 @@ int checkboard (void) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 63cd862..e23ec55 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -508,7 +508,7 @@ int pci_pre_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int rc; @@ -526,6 +526,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_strerror(rc)); } } + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index 9700611..cda1d7b 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -199,8 +199,10 @@ int checkboard(void) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c index 4409ea6..3e17132 100644 --- a/board/esd/pmc405de/pmc405de.c +++ b/board/esd/pmc405de/pmc405de.c @@ -300,7 +300,7 @@ int pci_pre_init(struct pci_controller *hose) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int rc; @@ -318,6 +318,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_strerror(rc)); } } + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 062ae67..15c3151 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -882,7 +882,7 @@ int board_usb_cleanup(int index, enum usb_init_type init) #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int rc; @@ -899,5 +899,7 @@ void ft_board_setup(void *blob, bd_t *bd) printf("err=%s\n", fdt_strerror(rc)); } } + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index 01365dc..f8f1834 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -74,13 +74,15 @@ int board_eth_init(bd_t *bis) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 34d66d5..bed8f56 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -1110,7 +1110,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -1136,6 +1136,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } /* diff --git a/board/freescale/bsc9131rdb/bsc9131rdb.c b/board/freescale/bsc9131rdb/bsc9131rdb.c index 9146f49..75e1142 100644 --- a/board/freescale/bsc9131rdb/bsc9131rdb.c +++ b/board/freescale/bsc9131rdb/bsc9131rdb.c @@ -58,7 +58,7 @@ struct node_info nodes[] = { { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, }; #endif -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -74,5 +74,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif fdt_fixup_dr_usb(blob, bd); + + return 0; } #endif diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index c88838b..36a68db 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -363,7 +363,7 @@ struct node_info nodes[] = { { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, }; #endif -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -423,5 +423,7 @@ void ft_board_setup(void *blob, bd_t *bd) printf("\nRemove sim from hwconfig and reset\n"); } } + + return 0; } #endif diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c index 534c6d1..d757709 100644 --- a/board/freescale/c29xpcie/c29xpcie.c +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -128,7 +128,7 @@ void fdt_del_sec(void *blob, int offset) } } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -150,5 +150,7 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_del_sec(blob, 1); else if (cpu->soc_ver == SVR_C292) fdt_del_sec(blob, 2); + + return 0; } #endif diff --git a/board/freescale/common/cds_pci_ft.c b/board/freescale/common/cds_pci_ft.c index 2e5dcdf..571dfbb 100644 --- a/board/freescale/common/cds_pci_ft.c +++ b/board/freescale/common/cds_pci_ft.c @@ -63,13 +63,14 @@ static void cds_pci_fixup(void *blob) } } -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); cds_pci_fixup(blob); #endif + + return 0; } #endif diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index c9c8eaa..5cb7570 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -90,7 +90,7 @@ static void show_eeprom(void) /* EEPROM tag ID, either CCID or NXID */ #ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - be32_to_cpu(e.version)); + e.version); #else printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif @@ -485,7 +485,7 @@ int mac_read_from_eeprom(void) #ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - be32_to_cpu(e.version)); + e.version); #else printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index 65b3867..6f0fea1 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -190,7 +190,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -213,4 +213,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 5fafc85..0a7720a 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -17,6 +17,9 @@ #include "../common/qixis.h" #include "ls1021aqds_qixis.h" +#ifdef CONFIG_U_QE +#include "../../../drivers/qe/qe.h" +#endif DECLARE_GLOBAL_DATA_PTR; @@ -137,9 +140,8 @@ int board_early_init_f(void) struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; #ifdef CONFIG_TSEC_ENET - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); #endif #ifdef CONFIG_FSL_IFC @@ -230,6 +232,13 @@ int board_init(void) /* Set CCI-400 control override register to * enable barrier transaction */ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + /* + * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register + * All transactions are treated as non-shareable + */ + out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); @@ -237,12 +246,19 @@ int board_init(void) fsl_serdes_init(); config_serdes_mux(); #endif + +#ifdef CONFIG_U_QE + u_qe_init(); +#endif + return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } u8 flash_read8(void *addr) diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 50d5640..3e8c37b 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -17,6 +17,10 @@ #include <fsl_mdio.h> #include <tsec.h> #include <fsl_sec.h> +#ifdef CONFIG_U_QE +#include "../../../drivers/qe/qe.h" +#endif + DECLARE_GLOBAL_DATA_PTR; @@ -251,11 +255,8 @@ int board_early_init_f(void) struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; #ifdef CONFIG_TSEC_ENET - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); - udelay(10); - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); #endif #ifdef CONFIG_FSL_IFC @@ -263,9 +264,7 @@ int board_early_init_f(void) #endif #ifdef CONFIG_FSL_DCU_FB - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); #endif return 0; @@ -273,11 +272,25 @@ int board_early_init_f(void) int board_init(void) { + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + + /* + * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register + * All transactions are treated as non-shareable + */ + out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); config_serdes_mux(); #endif +#ifdef CONFIG_U_QE + u_qe_init(); +#endif + return 0; } @@ -290,9 +303,11 @@ int misc_init_r(void) } #endif -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } u8 flash_read8(void *addr) diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c index 2c79a71..163a4c4 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2085a/ls2085a.c @@ -100,7 +100,7 @@ void fdt_fixup_board_enet(void *fdt) #endif #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -115,5 +115,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); #endif + + return 0; } #endif diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 940978e..40bd55d 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -275,8 +275,10 @@ int checkboard (void) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/freescale/mpc7448hpc2/mpc7448hpc2.c b/board/freescale/mpc7448hpc2/mpc7448hpc2.c index 71b760c..11747ca 100644 --- a/board/freescale/mpc7448hpc2/mpc7448hpc2.c +++ b/board/freescale/mpc7448hpc2/mpc7448hpc2.c @@ -70,11 +70,12 @@ phys_size_t initdram (int board_type) } #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); + + return 0; } #endif diff --git a/board/freescale/mpc8308rdb/mpc8308rdb.c b/board/freescale/mpc8308rdb/mpc8308rdb.c index fba41fe..93e1c50 100644 --- a/board/freescale/mpc8308rdb/mpc8308rdb.c +++ b/board/freescale/mpc8308rdb/mpc8308rdb.c @@ -161,11 +161,13 @@ int misc_init_r(void) return 0; } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); fdt_fixup_dr_usb(blob, bd); fdt_fixup_esdhc(blob, bd); + + return 0; } #endif diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 69e98a5..eac193e 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -116,12 +116,14 @@ int misc_init_r(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif #else /* CONFIG_SPL_BUILD */ diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c index e6f091f..ed611c5 100644 --- a/board/freescale/mpc8315erdb/mpc8315erdb.c +++ b/board/freescale/mpc8315erdb/mpc8315erdb.c @@ -188,7 +188,7 @@ void fdt_tsec1_fixup(void *fdt, bd_t *bd) do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1); } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI @@ -196,6 +196,8 @@ void ft_board_setup(void *blob, bd_t *bd) #endif fdt_fixup_dr_usb(blob, bd); fdt_tsec1_fixup(blob, bd); + + return 0; } #endif diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 3dce362..0a0152a 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -172,12 +172,14 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c index b7ea0e4..adf4254 100644 --- a/board/freescale/mpc832xemds/mpc832xemds.c +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -154,11 +154,13 @@ int checkboard(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index d909220..02b5040 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -273,11 +273,13 @@ void spi_cs_deactivate(struct spi_slave *slave) #endif /* CONFIG_HARD_SPI */ #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 803d722..22a1d99 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -378,11 +378,13 @@ int misc_init_r(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 5ff9dff..f0a55f8 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -402,7 +402,7 @@ static void ft_board_fixup_qe_usb(void *blob, bd_t *bd) "peripheral", sizeof("peripheral"), 1); } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI @@ -447,5 +447,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } } + + return 0; } #endif diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c index fef230b..478f820 100644 --- a/board/freescale/mpc8360erdk/mpc8360erdk.c +++ b/board/freescale/mpc8360erdk/mpc8360erdk.c @@ -340,9 +340,11 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); ft_pci_setup(blob, bd); + + return 0; } #endif diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index c749e55..572913c 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -328,7 +328,7 @@ static void ft_pci_fixup(void *blob, bd_t *bd) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); ft_tsec_fixup(blob, bd); @@ -340,5 +340,7 @@ void ft_board_setup(void *blob, bd_t *bd) ft_pci_fixup(blob, bd); ft_pcie_fixup(blob, bd); #endif + + return 0; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 9afdcaf..e0a1031 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -199,7 +199,7 @@ int misc_init_r(void) #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { #ifdef CONFIG_PCI ft_pci_setup(blob, bd); @@ -207,5 +207,7 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); fdt_fixup_dr_usb(blob, bd); fdt_fixup_esdhc(blob, bd); + + return 0; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 93eed59..7b0f461 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -271,7 +271,7 @@ int board_eth_init(bd_t *bis) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); @@ -285,5 +285,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_dr_usb(blob, bd); #endif + return 0; } #endif diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 93288c7..1069e2c 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -218,8 +218,7 @@ pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int node, tmp[2]; const char *path; @@ -237,5 +236,7 @@ ft_board_setup(void *blob, bd_t *bd) } #endif } + + return 0; } #endif diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 1b33db6..66fb228 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -305,7 +305,7 @@ int board_eth_init(bd_t *bis) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); @@ -314,5 +314,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif + + return 0; } #endif diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 7104e33..f99d639 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -438,8 +438,7 @@ pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int node, tmp[2]; const char *path; @@ -457,5 +456,7 @@ ft_board_setup(void *blob, bd_t *bd) } #endif } + + return 0; } #endif diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index a8fdcb5..a5c5d9d 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -345,10 +345,12 @@ void pci_init_board(void) #endif /* CONFIG_PCI */ #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); FT_FSL_PCI_SETUP; + + return 0; } #endif diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index cb55e1c..836578f 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -514,7 +514,7 @@ void pci_init_board(void) #endif /* CONFIG_PCI */ #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { #if defined(CONFIG_SYS_UCC_RMII_MODE) int nodeoff, off, err; @@ -579,5 +579,7 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_board_fixup_esdhc(blob, bd); fdt_board_fixup_qe_uart(blob, bd); fdt_board_fixup_qe_usb(blob, bd); + + return 0; } #endif diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 1bbf832..3f68cf4 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -232,7 +232,7 @@ int board_eth_init(bd_t *bis) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -249,5 +249,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif + + return 0; } #endif diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index d8740dd..95e398c 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -258,12 +258,13 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); FT_FSL_PCI_SETUP; + + return 0; } #endif diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index a58b5f9..94633b5 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -119,12 +119,11 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int off; u64 *tmp; - u32 *addrcells; + int addrcells; ft_cpu_setup(blob, bd); @@ -136,12 +135,13 @@ ft_board_setup(void *blob, bd_t *bd) * which is defined by the "reg" property in the soc node. */ off = fdt_path_offset(blob, "/soc8641"); - addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL); + addrcells = fdt_address_cells(blob, 0); tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL); if (tmp) { u64 addr; - if (addrcells && (*addrcells == 1)) + + if (addrcells == 1) addr = *(u32 *)tmp; else addr = *tmp; @@ -152,6 +152,8 @@ ft_board_setup(void *blob, bd_t *bd) "in u-boot. This means your .dts might " "be old.\n"); } + + return 0; } #endif diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 491b576..1cf0ab7 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -444,7 +444,7 @@ void fdt_disable_uart1(void *blob) } } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -496,6 +496,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_del_flexcan(blob); fdt_disable_uart1(blob); } + + return 0; } #endif diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index f5e1851..d7dd478 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -332,7 +332,7 @@ static void ft_codec_setup(void *blob, const char *compatible) } } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -356,5 +356,7 @@ void ft_board_setup(void *blob, bd_t *bd) /* Update the WM8776 node's clock frequency property */ ft_codec_setup(blob, "wlf,wm8776"); + + return 0; } #endif diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c index d4d277b..56f561a 100644 --- a/board/freescale/p1023rdb/p1023rdb.c +++ b/board/freescale/p1023rdb/p1023rdb.c @@ -130,7 +130,7 @@ int board_eth_init(bd_t *bis) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -147,5 +147,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif fdt_fixup_fman_ethernet(blob); + + return 0; } #endif diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index aba4f53..61ed466 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -234,7 +234,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_OF_BOARD_SETUP) extern void ft_pci_board_setup(void *blob); -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { const char *soc_usb_compat = "fsl-usb2-dr"; int err, usb1_off, usb2_off; @@ -263,39 +263,41 @@ void ft_board_setup(void *blob, bd_t *bd) int off = fdt_node_offset_by_compatible(blob, -1, soc_elbc_compat); if (off < 0) { - printf("WARNING: could not find compatible node" - " %s: %s.\n", soc_elbc_compat, - fdt_strerror(off)); - return; + printf("WARNING: could not find compatible node %s\n", + soc_elbc_compat); + return off; } err = fdt_del_node(blob, off); if (err < 0) { - printf("WARNING: could not remove %s: %s.\n", - soc_elbc_compat, fdt_strerror(err)); + printf("WARNING: could not remove %s\n", + soc_elbc_compat); + return err; } - return; + return 0; } #endif /* Delete USB2 node as it is muxed with eLBC */ usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat); if (usb1_off < 0) { - printf("WARNING: could not find compatible node" - " %s: %s.\n", soc_usb_compat, - fdt_strerror(usb1_off)); - return; + printf("WARNING: could not find compatible node %s\n", + soc_usb_compat); + return usb1_off; } usb2_off = fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat); if (usb2_off < 0) { - printf("WARNING: could not find compatible node" - " %s: %s.\n", soc_usb_compat, - fdt_strerror(usb2_off)); - return; + printf("WARNING: could not find compatible node %s\n", + soc_usb_compat); + return usb2_off; } err = fdt_del_node(blob, usb2_off); - if (err < 0) - printf("WARNING: could not remove %s: %s.\n", - soc_usb_compat, fdt_strerror(err)); + if (err < 0) { + printf("WARNING: could not remove %s\n", soc_usb_compat); + return err; + } + + return 0; } + #endif diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index a6756c6..3f47cfb 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -424,7 +424,7 @@ static void fdt_board_fixup_qe_pins(void *blob) #endif #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -459,17 +459,17 @@ void ft_board_setup(void *blob, bd_t *bd) int off = fdt_node_offset_by_compatible(blob, -1, soc_elbc_compat); if (off < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - soc_elbc_compat, - fdt_strerror(off)); - return; + printf("WARNING: could not find compatible node %s\n", + soc_elbc_compat); + return off; } err = fdt_del_node(blob, off); if (err < 0) { - printf("WARNING: could not remove %s: %s.\n", - soc_elbc_compat, fdt_strerror(err)); + printf("WARNING: could not remove %s\n", + soc_elbc_compat); + return err; } - return; + return 0; } #endif @@ -477,24 +477,23 @@ void ft_board_setup(void *blob, bd_t *bd) usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat); if (usb1_off < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - soc_usb_compat, - fdt_strerror(usb1_off)); - return; + printf("WARNING: could not find compatible node %s\n", + soc_usb_compat); + return usb1_off; } usb2_off = fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat); if (usb2_off < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - soc_usb_compat, - fdt_strerror(usb2_off)); - return; + printf("WARNING: could not find compatible node %s\n", + soc_usb_compat); + return usb2_off; } err = fdt_del_node(blob, usb2_off); if (err < 0) { - printf("WARNING: could not remove %s: %s.\n", - soc_usb_compat, fdt_strerror(err)); + printf("WARNING: could not remove %s\n", soc_usb_compat); + return err; } + return 0; } #endif diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c index a0a416b..a40bea3 100644 --- a/board/freescale/p1_twr/p1_twr.c +++ b/board/freescale/p1_twr/p1_twr.c @@ -261,7 +261,7 @@ static void fdt_board_fixup_qe_pins(void *blob) #endif #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -283,5 +283,7 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_board_fixup_qe_pins(blob); #endif fdt_fixup_dr_usb(blob, bd); + + return 0; } #endif diff --git a/board/freescale/p2020come/p2020come.c b/board/freescale/p2020come/p2020come.c index f777bb9..1db37e3 100644 --- a/board/freescale/p2020come/p2020come.c +++ b/board/freescale/p2020come/p2020come.c @@ -250,7 +250,7 @@ int board_eth_init(bd_t *bis) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -269,5 +269,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_HAS_FSL_DR_USB fdt_fixup_dr_usb(blob, bd); #endif + + return 0; } #endif diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index b72fcff..5d18e8d 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -236,7 +236,7 @@ int board_eth_init(bd_t *bis) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -257,5 +257,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif + + return 0; } #endif diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index a14b43b..e600bdb 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -215,7 +215,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -239,4 +239,6 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); #endif + + return 0; } diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c b/board/freescale/qemu-ppce500/qemu-ppce500.c index 230870d..a0fca0d 100644 --- a/board/freescale/qemu-ppce500/qemu-ppce500.c +++ b/board/freescale/qemu-ppce500/qemu-ppce500.c @@ -235,9 +235,11 @@ int board_eth_init(bd_t *bis) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { FT_FSL_PCI_SETUP; + + return 0; } #endif diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 19af46e..13285be 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -233,7 +233,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -259,6 +259,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } void qixis_dump_switch(void) diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index ddb669f..4734f9d 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -85,7 +85,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -110,6 +110,8 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); #endif + + return 0; } #ifdef CONFIG_DEEP_SLEEP diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README new file mode 100755 index 0000000..83060c1 --- /dev/null +++ b/board/freescale/t208xqds/README @@ -0,0 +1,274 @@ +The T2080QDS is a high-performance computing evaluation, development and +test platform supporting the T2080 QorIQ Power Architecture processor. + +T2080 SoC Overview +------------------ +The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power +Architecture processor cores with high-performance datapath acceleration +logic and network and peripheral bus interfaces required for networking, +telecom/datacom, wireless infrastructure, and mil/aerospace applications. + +T2080 includes the following functions and features: + - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz + - 2MB L2 cache and 512KB CoreNet platform cache (CPC) + - Hierarchical interconnect fabric + - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving + - Data Path Acceleration Architecture (DPAA) incorporating acceleration + - 16 SerDes lanes up to 10.3125 GHz + - 8 Ethernet interfaces, supporting combinations of the following: + - Up to four 10 Gbps Ethernet MACs + - Up to eight 1 Gbps Ethernet MACs + - Up to four 2.5 Gbps Ethernet MACs + - High-speed peripheral interfaces + - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) + - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz + - Additional peripheral interfaces + - Two serial ATA (SATA 2.0) controllers + - Two high-speed USB 2.0 controllers with integrated PHY + - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) + - Enhanced serial peripheral interface (eSPI) + - Four I2C controllers + - Four 2-pin UARTs or two 4-pin UARTs + - Integrated Flash Controller supporting NAND and NOR flash + - Three eight-channel DMA engines + - Support for hardware virtualization and partitioning enforcement + - QorIQ Platform's Trust Architecture 2.0 + +Differences between T2080 and T2081 +----------------------------------- + Feature T2080 T2081 + 1G Ethernet numbers: 8 6 + 10G Ethernet numbers: 4 2 + SerDes lanes: 16 8 + Serial RapidIO,RMan: 2 no + SATA Controller: 2 no + Aurora: yes no + SoC Package: 896-pins 780-pins + + +T2080QDS feature overview +------------------------- +Processor: + - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz +Memory: + - Single memory controller capable of supporting DDR3 and DDR3-LV devices + - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support +Ethernet interfaces: + - Two 1Gbps RGMII on-board ports + - Four 10Gbps XFI on-board cages + - 1Gbps/2.5Gbps SGMII Riser card + - 10Gbps XAUI Riser card +Accelerator: + - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC +SerDes: + - 16 lanes up to 10.3125GHz + - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI +IFC: + - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA +eSPI: + - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040) +USB: + - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB) +PCIE: + - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) +SATA: + - Two SATA 2.0 ports on-board +SRIO: + - Two Serial RapidIO 2.0 ports up to 5 GHz +eSDHC: + - Supports SD/SDHC/SDXC/eMMC Card +I2C: + - Four I2C controllers. +UART: + - Dual 4-pins UART serial ports +System Logic: + - QIXIS-II FPGA system controll +Debug Features: + - Support Legacy, COP/JTAG, Aurora, Event and EVT +XFI: + - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to + a on-board SFP+ cages, which to house optical module (fiber cable) or + direct attach cable(copper), the copper cable is used to emulate + 10GBASE-KR scenario. + So, for XFI usage, there are two scenarios, one will use fiber cable, + another will use copper cable. An hwconfig env "fsl_10gkr_copper" is + introduced to indicate a XFI port will use copper cable, and U-boot + will fixup the dtb accordingly. + It's used as: fsl_10gkr_copper:<10g_mac_name> + The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they + do not have to be coexist in hwconfig. If a MAC is listed in the env + "fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable + will be used by default. + for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4" in + hwconfig, then both four XFI ports will use copper cable. + set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two + XFI ports will use copper cable, the other two XFI ports will use fiber + cable. +1000BASE-KX(1G-KX): + - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane + runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane + in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration + Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper + initialization. + Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC + 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a + MAC to use 1G-KX mode, set its' corresponding env in "fsl_1gkx", 'fm1_1g1' + stands for MAC 1, 'fm1_1g2' stands for MAC 2, etc. + For ex. set "fsl_1gkx:fm1_1g1,fm1_1g2,fm1_1g5,fm1_1g6,fm1_1g9,fm1_1g10" in + hwconfig, MAC 1/2/5/6/9/10 will use 1G-KX mode. + +System Memory map +---------------- + +Start Address End Address Description Size +0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB +0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB +0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB +0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB +0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB +0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB +0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB +0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB +0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB +0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB +0xF_0000_0000 0xF_003F_FFFF DCSR 4MB +0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB +0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB +0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB +0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB +0x0_0000_0000 0x0_ffff_ffff DDR 4GB + + +128M NOR Flash memory Map +------------------------- +Start Address End Address Definition Max size +0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB +0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB +0xEC000000 0xEC01FFFF RCW (alt bank) 128KB +0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB +0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB +0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB +0xE8000000 0xE801FFFF RCW (current bank) 128KB + + + +Software configurations and board settings +------------------------------------------ +1. NOR boot: + a. build NOR boot image + $ make T2080QDS_config + $ make + b. program u-boot.bin image to NOR flash + => tftp 1000000 u-boot.bin + => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize + set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot + + Switching between default bank0 and alternate bank4 on NOR flash + To change boot source to vbank4: + by software: run command 'qixis_reset altbank' in u-boot. + by DIP-switch: set SW6[1:4] = '0100' + + To change boot source to vbank0: + by software: run command 'qixis_reset' in u-boot. + by DIP-Switch: set SW6[1:4] = '0000' + +2. NAND Boot: + a. build PBL image for NAND boot + $ make T2080QDS_NAND_config + $ make + b. program u-boot-with-spl-pbl.bin to NAND flash + => tftp 1000000 u-boot-with-spl-pbl.bin + => nand erase 0 $filesize + => nand write 1000000 0 $filesize + set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot + +3. SPI Boot: + a. build PBL image for SPI boot + $ make T2080QDS_SPIFLASH_config + $ make + b. program u-boot-with-spl-pbl.bin to SPI flash + => tftp 1000000 u-boot-with-spl-pbl.bin + => sf probe 0 + => sf erase 0 f0000 + => sf write 1000000 0 $filesize + set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot + +4. SD Boot: + a. build PBL image for SD boot + $ make T2080QDS_SDCARD_config + $ make + b. program u-boot-with-spl-pbl.bin to SD/MMC card + => tftp 1000000 u-boot-with-spl-pbl.bin + => mmc write 1000000 8 0x800 + => tftp 1000000 fsl_fman_ucode_T2080_xx.bin + => mmc write 1000000 0x820 80 + set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot + + +2-stage NAND/SPI/SD boot loader +------------------------------- +PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. +SPL further initializes DDR using SPD and environment variables +and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to u-boot for futher booting. + +SPL has following features: + - Executes within 256K + - No relocation required + +Run time view of SPL framework +------------------------------------------------- +|Area | Address | +------------------------------------------------- +|SecureBoot header | 0xFFFC0000 (32KB) | +------------------------------------------------- +|GD, BD | 0xFFFC8000 (4KB) | +------------------------------------------------- +|ENV | 0xFFFC9000 (8KB) | +------------------------------------------------- +|HEAP | 0xFFFCB000 (50KB) | +------------------------------------------------- +|STACK | 0xFFFD8000 (22KB) | +------------------------------------------------- +|U-boot SPL | 0xFFFD8000 (160KB) | +------------------------------------------------- + +NAND Flash memory Map on T2080QDS +-------------------------------------------------------------- +Start End Definition Size +0x000000 0x0FFFFF u-boot img 1MB (2 blocks) +0x100000 0x17FFFF u-boot env 512KB (1 block) +0x180000 0x1FFFFF FMAN ucode 512KB (1 block) + + +Micro SD Card memory Map on T2080QDS +---------------------------------------------------- +Block #blocks Definition Size +0x008 2048 u-boot img 1MB +0x800 0016 u-boot env 8KB +0x820 0128 FMAN ucode 64KB + + +SPI Flash memory Map on T2080QDS +---------------------------------------------------- +Start End Definition Size +0x000000 0x0FFFFF u-boot img 1MB +0x100000 0x101FFF u-boot env 8KB +0x110000 0x11FFFF FMAN ucode 64KB + + +How to update the ucode of Freescale FMAN +----------------------------------------- +=> tftp 1000000 fsl_fman_ucode_t2080_xx.bin +=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize + + +For more details, please refer to T2080QDS User Guide and access +website www.freescale.com and Freescale QorIQ SDK Infocenter document. diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index 5879198..b82e9e7 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -23,6 +23,7 @@ #include <phy.h> #include <asm/fsl_dtsec.h> #include <asm/fsl_serdes.h> +#include <hwconfig.h> #include "../common/qixis.h" #include "../common/fman.h" #include "t208xqds_qixis.h" @@ -46,6 +47,15 @@ #define EMI2 8 #endif +#define PCCR1_SGMIIA_KX_MASK 0x00008000 +#define PCCR1_SGMIIB_KX_MASK 0x00004000 +#define PCCR1_SGMIIC_KX_MASK 0x00002000 +#define PCCR1_SGMIID_KX_MASK 0x00001000 +#define PCCR1_SGMIIE_KX_MASK 0x00000800 +#define PCCR1_SGMIIF_KX_MASK 0x00000400 +#define PCCR1_SGMIIG_KX_MASK 0x00000200 +#define PCCR1_SGMIIH_KX_MASK 0x00000100 + static int mdio_mux[NUM_FM_PORTS]; static const char * const mdio_names[] = { @@ -187,8 +197,18 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, { int phy; char alias[20]; + char lane_mode[2][20] = {"1000BASE-KX", "10GBASE-KR"}; + char buf[32] = "serdes-1,"; struct fixed_link f_link; + int media_type = 0; + int off; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_T2080QDS + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 srds1_pccr1 = in_be32(&srds_regs->srdspccr1); +#endif u32 srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; @@ -199,9 +219,54 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, switch (port) { #if defined(CONFIG_T2080QDS) case FM1_DTSEC1: + if (hwconfig_sub("fsl_1gkx", "fm1_1g1")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx1"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio1"); + sprintf(buf, "%s%s%s", buf, "lane-c,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIH_KX_MASK); + break; + } case FM1_DTSEC2: + if (hwconfig_sub("fsl_1gkx", "fm1_1g2")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx2"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio2"); + sprintf(buf, "%s%s%s", buf, "lane-d,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIG_KX_MASK); + break; + } case FM1_DTSEC9: + if (hwconfig_sub("fsl_1gkx", "fm1_1g9")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx9"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio9"); + sprintf(buf, "%s%s%s", buf, "lane-a,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIE_KX_MASK); + break; + } case FM1_DTSEC10: + if (hwconfig_sub("fsl_1gkx", "fm1_1g10")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx10"); + fdt_status_okay_by_alias(fdt, + "1gkx_pcs_mdio10"); + sprintf(buf, "%s%s%s", buf, "lane-b,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIF_KX_MASK); + break; + } if (mdio_mux[port] == EMI1_SLOT2) { sprintf(alias, "phy_sgmii_s2_%x", phy); fdt_set_phy_handle(fdt, compat, addr, alias); @@ -213,7 +278,29 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, } break; case FM1_DTSEC5: + if (hwconfig_sub("fsl_1gkx", "fm1_1g5")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx5"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio5"); + sprintf(buf, "%s%s%s", buf, "lane-g,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIIC_KX_MASK); + break; + } case FM1_DTSEC6: + if (hwconfig_sub("fsl_1gkx", "fm1_1g6")) { + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_1gkx6"); + fdt_status_okay_by_alias(fdt, "1gkx_pcs_mdio6"); + sprintf(buf, "%s%s%s", buf, "lane-h,", + (char *)lane_mode[0]); + out_be32(&srds_regs->srdspccr1, srds1_pccr1 | + PCCR1_SGMIID_KX_MASK); + break; + } if (mdio_mux[port] == EMI1_SLOT1) { sprintf(alias, "phy_sgmii_s1_%x", phy); fdt_set_phy_handle(fdt, compat, addr, alias); @@ -257,6 +344,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, default: break; } + if (media_type) { + /* set property for 1000BASE-KX in dtb */ + off = fdt_node_offset_by_compat_reg(fdt, + "fsl,fman-memac-mdio", addr + 0x1000); + fdt_setprop_string(fdt, off, "lane-instance", buf); + } } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) { switch (srds_s1) { @@ -265,15 +358,77 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, case 0x6c: case 0x6d: case 0x71: - f_link.phy_id = port; - f_link.duplex = 1; - f_link.link_speed = 10000; - f_link.pause = 0; - f_link.asym_pause = 0; - /* no PHY for XFI */ - fdt_delprop(fdt, offset, "phy-handle"); - fdt_setprop(fdt, offset, "fixed-link", &f_link, - sizeof(f_link)); + /* + * if the 10G is XFI, check hwconfig to see what is the + * media type, there are two types, fiber or copper, + * fix the dtb accordingly. + */ + switch (port) { + case FM1_10GEC1: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) { + /* it's MAC9 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi9"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio9"); + sprintf(buf, "%s%s%s", buf, "lane-a,", + (char *)lane_mode[1]); + } + break; + case FM1_10GEC2: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) { + /* it's MAC10 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi10"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio10"); + sprintf(buf, "%s%s%s", buf, "lane-b,", + (char *)lane_mode[1]); + } + break; + case FM1_10GEC3: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g3")) { + /* it's MAC1 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi1"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio1"); + sprintf(buf, "%s%s%s", buf, "lane-c,", + (char *)lane_mode[1]); + } + break; + case FM1_10GEC4: + if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g4")) { + /* it's MAC2 */ + media_type = 1; + fdt_set_phy_handle(fdt, compat, addr, + "phy_xfi2"); + fdt_status_okay_by_alias(fdt, "xfi_pcs_mdio2"); + sprintf(buf, "%s%s%s", buf, "lane-d,", + (char *)lane_mode[1]); + } + break; + default: + return; + } + + if (!media_type) { + /* fixed-link is used for XFI fiber cable */ + f_link.phy_id = port; + f_link.duplex = 1; + f_link.link_speed = 10000; + f_link.pause = 0; + f_link.asym_pause = 0; + fdt_delprop(fdt, offset, "phy-handle"); + fdt_setprop(fdt, offset, "fixed-link", &f_link, + sizeof(f_link)); + } else { + /* set property for copper cable */ + off = fdt_node_offset_by_compat_reg(fdt, + "fsl,fman-memac-mdio", addr + 0x1000); + fdt_setprop_string(fdt, off, + "lane-instance", buf); + } break; default: break; diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index fc6d256..5c470c3 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -437,7 +437,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -460,4 +460,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index be99fb8..341453b 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -103,7 +103,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -126,4 +126,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c index 479e124..5441094 100644 --- a/board/freescale/t4qds/t4240emu.c +++ b/board/freescale/t4qds/t4240emu.c @@ -69,7 +69,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -83,4 +83,6 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_liodn(blob); fdt_fixup_dr_usb(blob, bd); + + return 0; } diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c index 6205fea..4f2cccd 100644 --- a/board/freescale/t4qds/t4240qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -683,7 +683,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -706,6 +706,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } /* diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index 2ff77b8..fac442b 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -88,7 +88,7 @@ int misc_init_r(void) return 0; } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -111,6 +111,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_board_enet(blob); #endif + + return 0; } /* diff --git a/board/galaxy5200/galaxy5200.c b/board/galaxy5200/galaxy5200.c index 29e40eb..5d957b7 100644 --- a/board/galaxy5200/galaxy5200.c +++ b/board/galaxy5200/galaxy5200.c @@ -146,9 +146,11 @@ int checkboard(void) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t * bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index df491a8..bb08cd2 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1483,7 +1483,7 @@ int misc_init_r(void) * - board (full model from EEPROM) * - peripherals removed from DTB if not loaded on board (per EEPROM config) */ -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { struct ventana_board_info *info = &ventana_info; struct ventana_eeprom_config *cfg; @@ -1495,7 +1495,7 @@ void ft_board_setup(void *blob, bd_t *bd) if (getenv("fdt_noauto")) { puts(" Skiping ft_board_setup (fdt_noauto defined)\n"); - return; + return 0; } /* Update partition nodes using info from mtdparts env var */ @@ -1504,7 +1504,7 @@ void ft_board_setup(void *blob, bd_t *bd) if (!model) { puts("invalid board info: Leaving FDT fully enabled\n"); - return; + return 0; } printf(" Adjusting FDT per EEPROM for %s...\n", model); @@ -1523,7 +1523,7 @@ void ft_board_setup(void *blob, bd_t *bd) */ if (getenv("fdt_noconfig")) { puts(" Skiping periperhal config (fdt_noconfig defined)\n"); - return; + return 0; } cfg = econfig; while (cfg->name) { @@ -1533,6 +1533,8 @@ void ft_board_setup(void *blob, bd_t *bd) } cfg++; } + + return 0; } #endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index ee6f9e0..8d01d8b 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -206,7 +206,7 @@ int misc_init_r(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) extern void __ft_board_setup(void *blob, bd_t *bd); -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { __ft_board_setup(blob, bd); @@ -215,5 +215,7 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status", "disabled", sizeof("disabled"), 1); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c index a051682..e4434b3 100644 --- a/board/gdsys/mpc8308/hrcon.c +++ b/board/gdsys/mpc8308/hrcon.c @@ -531,11 +531,13 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); fdt_fixup_dr_usb(blob, bd); fdt_fixup_esdhc(blob, bd); + + return 0; } #endif diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c index f76d968..64d90dd 100644 --- a/board/gdsys/p1022/controlcenterd.c +++ b/board/gdsys/p1022/controlcenterd.c @@ -326,7 +326,7 @@ int board_eth_init(bd_t *bis) } #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -343,6 +343,8 @@ void ft_board_setup(void *blob, bd_t *bd) #endif FT_FSL_PCI_SETUP; + + return 0; } #endif diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index a1b6749..fc2385c 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -94,7 +94,7 @@ void dram_init_banksize(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *fdt, bd_t *bd) +int ft_board_setup(void *fdt, bd_t *bd) { static const char disabled[] = "disabled"; u32 reg = readl(HB_SREG_A9_PWRDOM_STAT); @@ -106,6 +106,8 @@ void ft_board_setup(void *fdt, bd_t *bd) if (!(reg & PWRDOM_STAT_EMMC)) do_fixup_by_compat(fdt, "calxeda,hb-sdhci", "status", disabled, sizeof(disabled), 1); + + return 0; } #endif diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index a99416b..f0af24a 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -311,10 +311,11 @@ void ide_set_reset (int idereset) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/ids/ids8313/ids8313.c b/board/ids/ids8313/ids8313.c index f742143..e7838dc 100644 --- a/board/ids/ids8313/ids8313.c +++ b/board/ids/ids8313/ids8313.c @@ -138,9 +138,11 @@ phys_size_t initdram(int board_type) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c index 0fbdfdb..5d2ab2f 100644 --- a/board/ifm/ac14xx/ac14xx.c +++ b/board/ifm/ac14xx/ac14xx.c @@ -608,8 +608,10 @@ int checkboard(void) } #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/ifm/o2dnt2/o2dnt2.c b/board/ifm/o2dnt2/o2dnt2.c index 6716ffc..ca09767 100644 --- a/board/ifm/o2dnt2/o2dnt2.c +++ b/board/ifm/o2dnt2/o2dnt2.c @@ -364,7 +364,7 @@ int update_flash_size(int flash_size) } #endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */ -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int phy_addr = CONFIG_PHY_ADDR; char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0"; @@ -380,5 +380,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif /* fix up the phy address */ do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c index 5843725..4ab7160 100644 --- a/board/intercontrol/digsy_mtc/digsy_mtc.c +++ b/board/intercontrol/digsy_mtc/digsy_mtc.c @@ -454,7 +454,7 @@ int update_flash_size (int flash_size) } #endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */ -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int phy_addr = CONFIG_PHY_ADDR; char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0"; @@ -478,5 +478,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif /* fix up the phy address */ do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/ipek01/ipek01.c b/board/ipek01/ipek01.c index d44c4bf..2078f53 100644 --- a/board/ipek01/ipek01.c +++ b/board/ipek01/ipek01.c @@ -196,10 +196,12 @@ void pci_init_board (void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup (void *blob, bd_t * bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index 78e4b5d..8856393 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -283,9 +283,10 @@ void ide_set_reset (int idereset) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index dfbfab8..e200935 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -460,8 +460,10 @@ static void setports(int gpio) } #endif #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 0543483..1da0dcb 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -359,9 +359,11 @@ int checkboard(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index 4a73613..a74f75b 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -261,7 +261,7 @@ void fdt_fixup_fman_mac_addresses(void *blob) } #endif -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; @@ -286,6 +286,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_ethernet(blob); fdt_fixup_fman_mac_addresses(blob); #endif + + return 0; } #if defined(CONFIG_POST) diff --git a/board/korat/korat.c b/board/korat/korat.c index 8b83000..d9ab2fd 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -610,7 +610,7 @@ void pci_target_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { u32 val[4]; int rc; @@ -627,5 +627,7 @@ void ft_board_setup(void *blob, bd_t *bd) if (rc) printf("Unable to update property NOR mapping, err=%s\n", fdt_strerror(rc)); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c index a4c1998..71c6a79 100644 --- a/board/kup/kup4k/kup4k.c +++ b/board/kup/kup4k/kup4k.c @@ -280,8 +280,10 @@ static unsigned char swapbyte(unsigned char c) * Device Tree Support */ #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/manroland/mucmc52/mucmc52.c b/board/manroland/mucmc52/mucmc52.c index c3ce66d..c8ed5b7 100644 --- a/board/manroland/mucmc52/mucmc52.c +++ b/board/manroland/mucmc52/mucmc52.c @@ -385,8 +385,10 @@ void pci_init_board (void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/manroland/uc101/uc101.c b/board/manroland/uc101/uc101.c index 5c5afa2..e794c46 100644 --- a/board/manroland/uc101/uc101.c +++ b/board/manroland/uc101/uc101.c @@ -358,8 +358,10 @@ void hw_watchdog_reset(void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index a6235e5..4d0ebaa 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -185,9 +185,11 @@ int checkboard(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/mpc8308_p1m/mpc8308_p1m.c b/board/mpc8308_p1m/mpc8308_p1m.c index 2009e62..688cc12 100644 --- a/board/mpc8308_p1m/mpc8308_p1m.c +++ b/board/mpc8308_p1m/mpc8308_p1m.c @@ -62,10 +62,12 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); fdt_fixup_dr_usb(blob, bd); + + return 0; } #endif diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c index 08eb5e8..529a58c 100644 --- a/board/muas3001/muas3001.c +++ b/board/muas3001/muas3001.c @@ -329,9 +329,11 @@ void ft_blob_update (void *blob, bd_t *bd) } } -void ft_board_setup (void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); ft_blob_update (blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/munices/munices.c b/board/munices/munices.c index 319fa8c..23d0f56 100644 --- a/board/munices/munices.c +++ b/board/munices/munices.c @@ -146,9 +146,10 @@ void pci_init_board(void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index 15f8f31..81f3024 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -477,7 +477,7 @@ static unsigned char edid_buf[128] = { }; #endif -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { u32 val[8]; int rc, i = 0; @@ -526,6 +526,8 @@ void ft_board_setup(void *blob, bd_t *bd) if (rc) printf("Unable to update flash reg property, err=%s\n", fdt_strerror(rc)); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c index ce515d8..ed41de1 100644 --- a/board/phytec/pcm030/pcm030.c +++ b/board/phytec/pcm030/pcm030.c @@ -164,9 +164,11 @@ void pci_init_board(void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t * bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c index 7445f53..db904a4 100644 --- a/board/raspberrypi/rpi_b/rpi_b.c +++ b/board/raspberrypi/rpi_b/rpi_b.c @@ -154,7 +154,7 @@ int board_mmc_init(bd_t *bis) msg_clk->get_clock_rate.body.resp.rate_hz); } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { /* * For now, we simply always add the simplefb DT node. Later, we @@ -162,4 +162,6 @@ void ft_board_setup(void *blob, bd_t *bd) * node exists for the "real" graphics driver. */ lcd_dt_simplefb_add_node(blob); + + return 0; } diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 33003ee..b7d2381 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -382,6 +382,22 @@ static void board_gpio_init(void) gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP); gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X); gpio_direction_input(EXYNOS4X12_GPIO_X31); + + /* Blue LED (Odroid X2/U2/U3) */ + gpio_request(EXYNOS4X12_GPIO_C10, "Blue LED"); + + gpio_direction_output(EXYNOS4X12_GPIO_C10, 0); + +#ifdef CONFIG_CMD_USB + /* USB3503A Reference frequency */ + gpio_request(EXYNOS4X12_GPIO_X30, "USB3503A RefFreq"); + + /* USB3503A Connect */ + gpio_request(EXYNOS4X12_GPIO_X34, "USB3503A Connect"); + + /* USB3503A Reset */ + gpio_request(EXYNOS4X12_GPIO_X35, "USB3503A Reset"); +#endif } static int pmic_init_max77686(void) @@ -462,9 +478,39 @@ struct s3c_plat_otg_data s5pc210_otg_data = { .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, .usb_flags = PHY0_SLEEP, }; +#endif + +#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB) int board_usb_init(int index, enum usb_init_type init) { +#ifdef CONFIG_CMD_USB + struct pmic *p_pmic; + + /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/ + /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */ + if (gd->board_type == ODROID_TYPE_U3) + gpio_direction_output(EXYNOS4X12_GPIO_X30, 0); + else + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1); + + /* Disconnect, Reset, Connect */ + gpio_direction_output(EXYNOS4X12_GPIO_X34, 0); + gpio_direction_output(EXYNOS4X12_GPIO_X35, 0); + gpio_direction_output(EXYNOS4X12_GPIO_X35, 1); + gpio_direction_output(EXYNOS4X12_GPIO_X34, 1); + + /* Power off and on BUCK8 for LAN9730 */ + debug("LAN9730 - Turning power buck 8 OFF and ON.\n"); + + p_pmic = pmic_get("MAX77686_PMIC"); + if (p_pmic && !pmic_probe(p_pmic)) { + max77686_set_buck_voltage(p_pmic, 8, 750000); + max77686_set_buck_voltage(p_pmic, 8, 3300000); + } + +#endif + debug("USB_udc_probe\n"); return s3c_udc_probe(&s5pc210_otg_data); } diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig index d3a5b7f..e7aafe5 100644 --- a/board/samsung/smdk5420/Kconfig +++ b/board/samsung/smdk5420/Kconfig @@ -1,3 +1,19 @@ +if TARGET_PEACH_PI + +config SYS_BOARD + string + default "smdk5420" + +config SYS_VENDOR + string + default "samsung" + +config SYS_CONFIG_NAME + string + default "peach-pi" + +endif + if TARGET_PEACH_PIT config SYS_BOARD diff --git a/board/samsung/smdk5420/MAINTAINERS b/board/samsung/smdk5420/MAINTAINERS index e0f5c7a..1423f83 100644 --- a/board/samsung/smdk5420/MAINTAINERS +++ b/board/samsung/smdk5420/MAINTAINERS @@ -6,3 +6,5 @@ F: include/configs/peach-pit.h F: configs/peach-pit_defconfig F: include/configs/smdk5420.h F: configs/smdk5420_defconfig +F: include/configs/peach-pi.h +F: configs/peach-pi_defconfig diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 89da47e..72786d2 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -214,11 +214,13 @@ void sdram_init(void) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index d584276..25329e4 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -301,12 +301,14 @@ int last_stage_init(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_FSL_PCI_INIT FT_FSL_PCI_SETUP; #endif + + return 0; } #endif diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 4906be4..6bdf1a2 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -173,11 +173,13 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup (void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); FT_FSL_PCI_SETUP; + + return 0; } #endif diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 2caefbb..953a43f 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -218,8 +218,7 @@ int board_early_init_r (void) #endif /* CONFIG_BOARD_EARLY_INIT_R */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { u32 val[12]; int rc, i = 0; @@ -251,6 +250,8 @@ ft_board_setup(void *blob, bd_t *bd) if (rc) printf("Unable to update localbus ranges, err=%s\n", fdt_strerror(rc)); + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c index f5c3d75..6e4eed8 100644 --- a/board/stx/stxssa/stxssa.c +++ b/board/stx/stxssa/stxssa.c @@ -233,9 +233,11 @@ reset_phy(void) } #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); + + return 0; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 7555896..246cd9a 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -24,6 +24,7 @@ config MACH_SUN7I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL + select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT config MACH_SUN8I bool "sun8i (Allwinner A23)" @@ -215,4 +216,18 @@ config USB2_VBUS_PIN ---help--- See USB1_VBUS_PIN help text. +config VIDEO + boolean "Enable graphical uboot console on HDMI" + default y + ---help--- + Say Y here to add support for using a cfb console on the HDMI output + found on most sunxi devices. + +config USB_KEYBOARD + boolean "Enable USB keyboard support" + default y + ---help--- + Say Y here to add support for using a USB keyboard (typically used + in combination with a graphical console on HDMI). + endif diff --git a/board/sunxi/ahci.c b/board/sunxi/ahci.c index 5e12328..b7f0dda 100644 --- a/board/sunxi/ahci.c +++ b/board/sunxi/ahci.c @@ -76,6 +76,8 @@ void scsi_init(void) #ifdef CONFIG_SATAPWR gpio_request(CONFIG_SATAPWR, "satapwr"); gpio_direction_output(CONFIG_SATAPWR, 1); + /* Give attached sata device time to power-up to avoid link timeouts */ + mdelay(500); #endif if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0) diff --git a/board/sunxi/board.c b/board/sunxi/board.c index e6ec5b8..4c1c69a 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -24,6 +24,7 @@ #endif #include <asm/arch/clock.h> #include <asm/arch/cpu.h> +#include <asm/arch/display.h> #include <asm/arch/dram.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> @@ -237,3 +238,12 @@ int misc_init_r(void) return 0; } #endif + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_VIDEO_DT_SIMPLEFB + return sunxi_simplefb_setup(blob); +#endif +} +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 051aca0..571bc9e 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -13,7 +13,12 @@ int sunxi_gmac_initialize(bd_t *bis) (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; /* Set up clock gating */ +#ifndef CONFIG_MACH_SUN6I setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); +#else + setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_RESET_OFFSET_GMAC); + setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_GMAC); +#endif /* Set MII clock */ #ifdef CONFIG_RGMII @@ -33,6 +38,7 @@ int sunxi_gmac_initialize(bd_t *bis) setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10); #endif +#ifndef CONFIG_MACH_SUN6I /* Configure pin mux settings for GMAC */ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { #ifdef CONFIG_RGMII @@ -43,9 +49,48 @@ int sunxi_gmac_initialize(bd_t *bis) sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC); sunxi_gpio_set_drv(pin, 3); } +#elif defined CONFIG_RGMII + /* Configure sun6i RGMII mode pin mux settings */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(20); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + for (pin = SUNXI_GPA(25); pin <= SUNXI_GPA(27); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } +#elif defined CONFIG_GMII + /* Configure sun6i GMII mode pin mux settings */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(27); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 2); + } +#else + /* Configure sun6i MII mode pin mux settings */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + for (pin = SUNXI_GPA(8); pin <= SUNXI_GPA(9); pin++) + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + for (pin = SUNXI_GPA(11); pin <= SUNXI_GPA(14); pin++) + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(24); pin++) + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); + for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++) + sunxi_gpio_set_cfgpin(pin, SUN6I_GPA0_GMAC); +#endif #ifdef CONFIG_RGMII return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); +#elif defined CONFIG_GMII + return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII); #else return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII); #endif diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index ff7bc4b..04ec675 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -114,7 +114,7 @@ u32 spl_boot_device(void) #endif #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { int lpae; char *env; @@ -217,6 +217,8 @@ void ft_board_setup(void *blob, bd_t *bd) } } } + + return 0; } void ft_board_setup_ex(void *blob, bd_t *bd) diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index a1f56cd..e9363ea 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -863,12 +863,14 @@ int board_get_height (void) #endif /* CONFIG_VIDEO_SM501 */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #if defined(CONFIG_VIDEO) fdt_add_edid(blob, "smi,sm501", edid_buf); #endif + + return 0; } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index 814fcb2..d891a38 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -414,12 +414,14 @@ static void set_ddr_config(void) { } #ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif /* CONFIG_PCI */ + + return 0; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c index 9ce2a57..3b5230a 100644 --- a/board/tqc/tqm8xx/tqm8xx.c +++ b/board/tqc/tqm8xx/tqm8xx.c @@ -674,10 +674,12 @@ void ft_blob_update (void *blob, bd_t *bd) } } -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); ft_blob_update(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index e480d57..c9e163e 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -266,12 +266,14 @@ int checkboard(void) * Device Tree Support */ #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { /* bring in eMMC dsr settings */ do_fixup_by_path_u32(blob, "/soc/aips-bus@02100000/usdhc@02198000", "dsr", tqma6_emmc_dsr, 2); tqma6_bb_ft_board_setup(blob, bd); + + return 0; } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c index c4feef8..7f24a30 100644 --- a/board/ve8313/ve8313.c +++ b/board/ve8313/ve8313.c @@ -192,11 +192,13 @@ void pci_init_board(void) #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + + return 0; } #endif diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index b7ad349..0028870 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -69,11 +69,13 @@ phys_size_t initdram(int board_type) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { #ifdef CONFIG_PCI ft_board_pci_setup(blob, bd); #endif ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/xes/xpedite520x/xpedite520x.c b/board/xes/xpedite520x/xpedite520x.c index aa9e99d..6a3df52 100644 --- a/board/xes/xpedite520x/xpedite520x.c +++ b/board/xes/xpedite520x/xpedite520x.c @@ -70,11 +70,13 @@ int board_early_init_r(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { #ifdef CONFIG_PCI ft_board_pci_setup(blob, bd); #endif ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/xes/xpedite537x/xpedite537x.c b/board/xes/xpedite537x/xpedite537x.c index efd563b..41419fe 100644 --- a/board/xes/xpedite537x/xpedite537x.c +++ b/board/xes/xpedite537x/xpedite537x.c @@ -72,11 +72,13 @@ int board_early_init_r(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { #ifdef CONFIG_PCI ft_board_pci_setup(blob, bd); #endif ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c index e64d682..1f05150 100644 --- a/board/xes/xpedite550x/xpedite550x.c +++ b/board/xes/xpedite550x/xpedite550x.c @@ -72,11 +72,13 @@ int board_early_init_r(void) } #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +int ft_board_setup(void *blob, bd_t *bd) { #ifdef CONFIG_PCI ft_board_pci_setup(blob, bd); #endif ft_cpu_setup(blob, bd); + + return 0; } #endif diff --git a/common/board_f.c b/common/board_f.c index f8fd324..98c9c72 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -581,7 +581,7 @@ static int reserve_stacks(void) gd->irq_sp = gd->start_addr_sp; # endif #else -# if defined(CONFIG_PPC) || defined(CONFIG_MIPS) +# ifdef CONFIG_PPC ulong *s; # endif @@ -611,12 +611,6 @@ static int reserve_stacks(void) s = (ulong *) gd->start_addr_sp; *s = 0; /* Terminate back chain */ *++s = 0; /* NULL return address */ -# elif defined(CONFIG_MIPS) - /* Clear initial stack frame */ - s = (ulong *) gd->start_addr_sp; - *s-- = 0; - *s-- = 0; - gd->start_addr_sp = (ulong) s; # endif /* Architecture specific code */ return 0; diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 5640ded..25b4675 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -566,8 +566,27 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #ifdef CONFIG_OF_BOARD_SETUP /* Call the board-specific fixup routine */ - else if (strncmp(argv[1], "boa", 3) == 0) - ft_board_setup(working_fdt, gd->bd); + else if (strncmp(argv[1], "boa", 3) == 0) { + int err = ft_board_setup(working_fdt, gd->bd); + + if (err) { + printf("Failed to update board information in FDT: %s\n", + fdt_strerror(err)); + return CMD_RET_FAILURE; + } + } +#endif +#ifdef CONFIG_OF_SYSTEM_SETUP + /* Call the board-specific fixup routine */ + else if (strncmp(argv[1], "sys", 3) == 0) { + int err = ft_system_setup(working_fdt, gd->bd); + + if (err) { + printf("Failed to add system information to FDT: %s\n", + fdt_strerror(err)); + return CMD_RET_FAILURE; + } + } #endif /* Create a chosen node */ else if (strncmp(argv[1], "cho", 3) == 0) { @@ -1008,6 +1027,9 @@ static char fdt_help_text[] = #ifdef CONFIG_OF_BOARD_SETUP "fdt boardsetup - Do board-specific set up\n" #endif +#ifdef CONFIG_OF_SYSTEM_SETUP + "fdt systemsetup - Do system-specific set up\n" +#endif "fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr> and make it active\n" "fdt resize - Resize fdt to size + padding to 4k addr\n" "fdt print <path> [<prop>] - Recursive print starting at <path>\n" diff --git a/common/fdt_support.c b/common/fdt_support.c index 2d3c387..ea42c63 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -16,22 +16,6 @@ #include <fdt_support.h> #include <exports.h> -/* - * Get cells len in bytes - * if #NNNN-cells property is 2 then len is 8 - * otherwise len is 4 - */ -static int get_cells_len(const void *fdt, const char *nr_cells_name) -{ - const fdt32_t *cell; - - cell = fdt_getprop(fdt, 0, nr_cells_name, NULL); - if (cell && fdt32_to_cpu(*cell) == 2) - return 8; - - return 4; -} - /** * fdt_getprop_u32_default_node - Return a node's property or a default * @@ -113,7 +97,8 @@ int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, } /** - * fdt_find_or_add_subnode - find or possibly add a subnode of a given node + * fdt_find_or_add_subnode() - find or possibly add a subnode of a given node + * * @fdt: pointer to the device tree blob * @parentoffset: structure block offset of a node * @name: name of the subnode to locate @@ -121,8 +106,7 @@ int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, * fdt_subnode_offset() finds a subnode of the node with a given name. * If the subnode does not exist, it will be created. */ -static int fdt_find_or_add_subnode(void *fdt, int parentoffset, - const char *name) +int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name) { int offset; @@ -246,7 +230,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end) return err; } - is_u64 = (get_cells_len(fdt, "#address-cells") == 8); + is_u64 = (fdt_address_cells(fdt, 0) == 2); err = fdt_setprop_uxx(fdt, nodeoffset, "linux,initrd-start", (uint64_t)initrd_start, is_u64); @@ -382,22 +366,22 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat, /* * fdt_pack_reg - pack address and size array into the "reg"-suitable stream */ -static int fdt_pack_reg(const void *fdt, void *buf, uint64_t *address, - uint64_t *size, int n) +static int fdt_pack_reg(const void *fdt, void *buf, u64 *address, u64 *size, + int n) { int i; - int address_len = get_cells_len(fdt, "#address-cells"); - int size_len = get_cells_len(fdt, "#size-cells"); + int address_len = fdt_address_cells(fdt, 0); + int size_len = fdt_size_cells(fdt, 0); char *p = buf; for (i = 0; i < n; i++) { - if (address_len == 8) + if (address_len == 2) *(fdt64_t *)p = cpu_to_fdt64(address[i]); else *(fdt32_t *)p = cpu_to_fdt32(address[i]); p += address_len; - if (size_len == 8) + if (size_len == 2) *(fdt64_t *)p = cpu_to_fdt64(size[i]); else *(fdt32_t *)p = cpu_to_fdt32(size[i]); @@ -968,13 +952,8 @@ void of_bus_default_count_cells(void *blob, int parentoffset, { const fdt32_t *prop; - if (addrc) { - prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL); - if (prop) - *addrc = be32_to_cpup(prop); - else - *addrc = 2; - } + if (addrc) + *addrc = fdt_address_cells(blob, parentoffset); if (sizec) { prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL); @@ -1420,11 +1399,7 @@ u64 fdt_get_base_address(void *fdt, int node) u32 naddr; const fdt32_t *prop; - prop = fdt_getprop(fdt, node, "#address-cells", &size); - if (prop && size == 4) - naddr = be32_to_cpup(prop); - else - naddr = 2; + naddr = fdt_address_cells(fdt, node); prop = fdt_getprop(fdt, node, "ranges", &size); @@ -1524,3 +1499,65 @@ int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr, return 0; } + +/** + * fdt_setup_simplefb_node - Fill and enable a simplefb node + * + * @fdt: ptr to device tree + * @node: offset of the simplefb node + * @base_address: framebuffer base address + * @width: width in pixels + * @height: height in pixels + * @stride: bytes per line + * @format: pixel format string + * + * Convenience function to fill and enable a simplefb node. + */ +int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, + u32 height, u32 stride, const char *format) +{ + char name[32]; + fdt32_t cells[4]; + int i, addrc, sizec, ret; + + of_bus_default_count_cells(fdt, fdt_parent_offset(fdt, node), + &addrc, &sizec); + i = 0; + if (addrc == 2) + cells[i++] = cpu_to_fdt32(base_address >> 32); + cells[i++] = cpu_to_fdt32(base_address); + if (sizec == 2) + cells[i++] = 0; + cells[i++] = cpu_to_fdt32(height * stride); + + ret = fdt_setprop(fdt, node, "reg", cells, sizeof(cells[0]) * i); + if (ret < 0) + return ret; + + snprintf(name, sizeof(name), "framebuffer@%llx", base_address); + ret = fdt_set_name(fdt, node, name); + if (ret < 0) + return ret; + + ret = fdt_setprop_u32(fdt, node, "width", width); + if (ret < 0) + return ret; + + ret = fdt_setprop_u32(fdt, node, "height", height); + if (ret < 0) + return ret; + + ret = fdt_setprop_u32(fdt, node, "stride", stride); + if (ret < 0) + return ret; + + ret = fdt_setprop_string(fdt, node, "format", format); + if (ret < 0) + return ret; + + ret = fdt_setprop_string(fdt, node, "status", "okay"); + if (ret < 0) + return ret; + + return 0; +} diff --git a/common/image-fdt.c b/common/image-fdt.c index a39ae1b..1d76bd6 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -460,19 +460,32 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, { ulong *initrd_start = &images->initrd_start; ulong *initrd_end = &images->initrd_end; - int ret; + int ret = -EPERM; + int fdt_ret; if (fdt_chosen(blob) < 0) { - puts("ERROR: /chosen node create failed"); - puts(" - must RESET the board to recover.\n"); - return -1; + printf("ERROR: /chosen node create failed\n"); + goto err; } if (arch_fixup_fdt(blob) < 0) { - puts("ERROR: arch specific fdt fixup failed"); - return -1; + printf("ERROR: arch-specific fdt fixup failed\n"); + goto err; + } + if (IMAGE_OF_BOARD_SETUP) { + fdt_ret = ft_board_setup(blob, gd->bd); + if (fdt_ret) { + printf("ERROR: board-specific fdt fixup failed: %s\n", + fdt_strerror(fdt_ret)); + goto err; + } + } + if (IMAGE_OF_SYSTEM_SETUP) { + if (ft_system_setup(blob, gd->bd)) { + printf("ERROR: system-specific fdt fixup failed: %s\n", + fdt_strerror(fdt_ret)); + goto err; + } } - if (IMAGE_OF_BOARD_SETUP) - ft_board_setup(blob, gd->bd); fdt_fixup_ethernet(blob); /* Delete the old LMB reservation */ @@ -481,7 +494,7 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, ret = fdt_shrink_to_minimum(blob); if (ret < 0) - return ret; + goto err; of_size = ret; if (*initrd_start && *initrd_end) { @@ -493,7 +506,7 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, fdt_initrd(blob, *initrd_start, *initrd_end); if (!ft_verify_fdt(blob)) - return -1; + goto err; #if defined(CONFIG_SOC_KEYSTONE) if (IMAGE_OF_BOARD_SETUP) @@ -501,4 +514,8 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, #endif return 0; +err: + printf(" - must RESET the board to recover.\n\n"); + + return ret; } diff --git a/common/lcd.c b/common/lcd.c index d8e1371..28b3fe7 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -30,6 +30,7 @@ #include <splash.h> #include <asm/io.h> #include <asm/unaligned.h> +#include <fdt_support.h> #if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ defined(CONFIG_CPU_MONAHANS) @@ -1172,51 +1173,13 @@ int lcd_get_screen_columns(void) #if defined(CONFIG_LCD_DT_SIMPLEFB) static int lcd_dt_simplefb_configure_node(void *blob, int off) { - u32 stride; - fdt32_t cells[2]; - int ret; - static const char format[] = #if LCD_BPP == LCD_COLOR16 - "r5g6b5"; + return fdt_setup_simplefb_node(blob, off, gd->fb_base, + panel_info.vl_col, panel_info.vl_row, + panel_info.vl_col * 2, "r5g6b5"); #else - ""; + return -1; #endif - - if (!format[0]) - return -1; - - stride = panel_info.vl_col * 2; - - cells[0] = cpu_to_fdt32(gd->fb_base); - cells[1] = cpu_to_fdt32(stride * panel_info.vl_row); - ret = fdt_setprop(blob, off, "reg", cells, sizeof(cells[0]) * 2); - if (ret < 0) - return -1; - - cells[0] = cpu_to_fdt32(panel_info.vl_col); - ret = fdt_setprop(blob, off, "width", cells, sizeof(cells[0])); - if (ret < 0) - return -1; - - cells[0] = cpu_to_fdt32(panel_info.vl_row); - ret = fdt_setprop(blob, off, "height", cells, sizeof(cells[0])); - if (ret < 0) - return -1; - - cells[0] = cpu_to_fdt32(stride); - ret = fdt_setprop(blob, off, "stride", cells, sizeof(cells[0])); - if (ret < 0) - return -1; - - ret = fdt_setprop(blob, off, "format", format, strlen(format) + 1); - if (ret < 0) - return -1; - - ret = fdt_delprop(blob, off, "status"); - if (ret < 0) - return -1; - - return 0; } int lcd_dt_simplefb_add_node(void *blob) diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index 5ff9bc5..9d37fd3 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -43,7 +43,7 @@ int spl_load_image_ext(block_dev_desc_t *block_dev, goto end; } err = ext4fs_read((char *)header, sizeof(struct image_header), &actlen); - if (err <= 0) { + if (err < 0) { puts("spl: ext4fs_read failed\n"); goto end; } @@ -54,12 +54,12 @@ int spl_load_image_ext(block_dev_desc_t *block_dev, end: #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - if (err <= 0) + if (err < 0) printf("%s: error reading image %s, err - %d\n", __func__, filename, err); #endif - return err <= 0; + return err < 0; } #ifdef CONFIG_SPL_OS_BOOT @@ -95,7 +95,7 @@ int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition) goto defaults; } err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen, &actlen); - if (err <= 0) { + if (err < 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); goto defaults; @@ -124,7 +124,7 @@ defaults: puts("spl: ext4fs_open failed\n"); err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen, &actlen); - if (err <= 0) { + if (err < 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", __func__, CONFIG_SPL_FS_LOAD_ARGS_NAME, err); diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 8517203..be8652b 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -2,6 +2,8 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI" CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb" CONFIG_USB1_VBUS_PIN="PG11" +CONFIG_VIDEO=n +CONFIG_USB_KEYBOARD=n +S:CONFIG_ARM=y +S:CONFIG_ARCH_SUNXI=y +S:CONFIG_MACH_SUN5I=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 61f5466..654e12a 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -2,6 +2,8 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI" CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb" CONFIG_USB1_VBUS_PIN="PG11" +CONFIG_VIDEO=n +CONFIG_USB_KEYBOARD=n +S:CONFIG_ARM=y +S:CONFIG_ARCH_SUNXI=y +S:CONFIG_MACH_SUN5I=y diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index bef568d..de78a01 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -1,5 +1,6 @@ CONFIG_SPL=y CONFIG_FDTFILE="sun6i-a31-colombus.dtb" +CONFIG_USB_KEYBOARD=n +S:CONFIG_ARM=y +S:CONFIG_ARCH_SUNXI=y +S:CONFIG_MACH_SUN6I=y diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index fc67bd9..50c2f93 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -4,3 +4,5 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN8I=y CONFIG_TARGET_IPPO_Q8H_V5=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb" +CONFIG_VIDEO=n +CONFIG_USB_KEYBOARD=n diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index f46439f..ac3cd36 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -1,5 +1,5 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" CONFIG_FDTFILE="sun6i-a31-m9.dtb" +S:CONFIG_ARM=y +S:CONFIG_ARCH_SUNXI=y @@ -14,5 +14,7 @@ CONFIG_FDTFILE="sun6i-a31-m9.dtb" # HDMI power ? +S:CONFIG_AXP221_ALDO2_VOLT=1800 +S:CONFIG_AXP221_ALDO3_VOLT=3000 -# No Vbus gpio for usb1 -+S:CONFIG_USB1_VBUS_PIN="" +# Vbus gpio for usb1 ++S:CONFIG_USB1_VBUS_PIN="PC27" +# No Vbus gpio for usb2 ++S:CONFIG_USB2_VBUS_PIN="" diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig new file mode 100644 index 0000000..8ada0db --- /dev/null +++ b/configs/peach-pi_defconfig @@ -0,0 +1,5 @@ +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_EXYNOS=y ++S:CONFIG_TARGET_PEACH_PI=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi" diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index f54b15f..de068e9 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -1,7 +1,33 @@ CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_LD4=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BDI=y +CONFIG_CMD_CONSOLE=y +CONFIG_CMD_BOOTD=y +CONFIG_CMD_RUN=y +CONFIG_CMD_IMI=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_EDITENV=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_NET=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_NFS=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index e795752..f4ddf5f 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -1,7 +1,33 @@ CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_PRO4=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BDI=y +CONFIG_CMD_CONSOLE=y +CONFIG_CMD_BOOTD=y +CONFIG_CMD_RUN=y +CONFIG_CMD_IMI=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_EDITENV=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_NET=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_NFS=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 6510937..ee14382 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -1,7 +1,33 @@ CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_SLD8=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BDI=y +CONFIG_CMD_CONSOLE=y +CONFIG_CMD_BOOTD=y +CONFIG_CMD_RUN=y +CONFIG_CMD_IMI=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_EDITENV=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_NET=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_NFS=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y diff --git a/doc/README.odroid b/doc/README.odroid index 528bb95..25b962b 100644 --- a/doc/README.odroid +++ b/doc/README.odroid @@ -141,3 +141,172 @@ And the boot sequence is: - boot_fit - if "Image.itb" exists - boot_zimg - if "zImage" exists - boot_uimg - if "uImage" exists + +11. USB host support +==================== + +The ethernet can be accessed after starting the USB subsystem in U-Boot. +The adapter does not come with a preconfigured MAC address, and hence it needs +to be set before starting USB. +setenv usbethaddr 02:DE:AD:BE:EF:FF + +Note that in this example a locally managed MAC address is chosen. Care should +be taken to make these MAC addresses unique within the same subnet. + +Start the USB subsystem: +Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF +Odroid # usb start +(Re)start USB... +USB0: USB EHCI 1.00 +scanning bus 0 for devices... 4 USB Device(s) found + scanning usb for storage devices... 1 Storage Device(s) found + scanning usb for ethernet devices... 1 Ethernet Device(s) found +Odroid # + +Automatic IP assignment: +------------------------ +If the ethernet is connected to a DHCP server (router maybe with DHCP enabled), +then the below will automatically assign an ip address through DHCP. +setenv autoload no +dhcp + +Odroid # setenv autoload no +Odroid # dhcp +Waiting for Ethernet connection... done. +BOOTP broadcast 1 +DHCP client bound to address 192.168.1.10 (524 ms) +Odroid # + +Note that this automatically sets the many IP address related variables in +U-Boot that is obtained from the DHCP server. + +Odroid # printenv ipaddr netmask gatewayip dnsip +ipaddr=192.168.1.10 +netmask=255.255.255.0 +gatewayip=192.168.1.1 +dnsip=192.168.1.1 + +Ping example: +The ping command can be used a test to check connectivity. In this example, +192.168.1.27 is a pingable server in the network. +Odroid # ping 192.168.1.27 +Waiting for Ethernet connection... done. +Using sms0 device +host 192.168.1.27 is alive +Odroid # + +Static IP assignment: +--------------------- +In the case where there are no DHCP servers in the network, or you want to +set the IP address statically, it can be done by: +Odroid # setenv ipaddr 192.168.1.10 +Odroid # ping 192.168.1.27 +Waiting for Ethernet connection... done. +Using sms0 device +host 192.168.1.27 is alive + +TFTP booting: +------------- +Say there exists a tftp server in the network with address 192.168.1.27 and +it serves a kernel image (zImage.3.17) and a DTB blob (exynos4412-odroidu3.dtb) +that needs to be loaded and booted. It can be accomplished as below: +(Assumes that you have setenv usbethaddr, and have not set autoload to no) + +Odroid # setenv serverip 192.168.1.27 +Odroid # tftpboot 0x40080000 zImage.3.17 +Waiting for Ethernet connection... done. +Using sms0 device +TFTP from server 192.168.1.27; our IP address is 192.168.1.10 +Filename 'zImage.3.17'. +Load address: 0x40080000 +Loading: ################################################################# + ################################################################# + ################################################################# + ####################### + 52.7 KiB/s +done +Bytes transferred = 3194200 (30bd58 hex) +Odroid # tftpboot 0x42000000 exynos4412-odroidu3.dtb +Waiting for Ethernet connection... done. +Using sms0 device +TFTP from server 192.168.1.27; our IP address is 192.168.1.10 +Filename 'exynos4412-odroidu3.dtb'. +Load address: 0x42000000 +Loading: #### + 40 KiB/s +done +Bytes transferred = 46935 (b757 hex) +Odroid # printenv bootargs +bootargs=Please use defined boot +Odroid # setenv bootargs console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootwait +Odroid # bootz 40080000 - 42000000 +Kernel image @ 0x40080000 [ 0x000000 - 0x30bd58 ] +## Flattened Device Tree blob at 42000000 + Booting using the fdt blob at 0x42000000 + Loading Device Tree to 4fff1000, end 4ffff756 ... OK + +Starting kernel ... + +[ 0.000000] Booting Linux on physical CPU 0xa00 +... etc ... + +In the above example you can substitute 'dhcp' for 'tftpboot' as well. + +USB Storage booting: +-------------------- +Similarly we can use the USB storage to load the kernel image/initrd/fdt etc +and boot. For this example, there is a USB drive plugged in. It has a FAT +1st partition and an EXT 2nd partition. Using the generic FS (ls/load) makes +it even easier to work with FAT/EXT file systems. +For this example the second EXT partition is used for booting and as rootfs. +The boot files - kernel and the dtb are present in the /boot directory of the +second partition. + +Odroid # usb start +(Re)start USB... +USB0: USB EHCI 1.00 +scanning bus 0 for devices... 4 USB Device(s) found + scanning usb for storage devices... 1 Storage Device(s) found + scanning usb for ethernet devices... +Error: sms0 address not set. <----- Note the error as usbethaddr +Warning: failed to set MAC address <----- is not set. +1 Ethernet Device(s) found +Odroid # usb part 0 + +Partition Map for USB device 0 -- Partition Type: DOS + +Part Start Sector Num Sectors UUID Type + 1 3072 263168 000c4046-01 06 + 2 266240 13457408 000c4046-02 83 + +Odroid # ls usb 0:2 /boot +<DIR> 4096 . +<DIR> 4096 .. + 353 boot.scr + 281 boot.txt + 101420 config-3.8.13.23 + 2127254 initrd.img-3.8.13.23 + 2194825 uInitrd + 2194825 uInitrd-3.8.13.23 + 2453112 zImage + 101448 config-3.8.13.26 + 2127670 uInitrd-3.8.13.26 + 2127606 initrd.img-3.8.13.26 + 3194200 zImage.3.17 <--- Kernel + 46935 exynos4412-odroidu3.dtb <--- DTB +Odroid # load usb 0:2 40080000 /boot/zImage.3.17 +3194200 bytes read in 471 ms (6.5 MiB/s) +Odroid # load usb 0:2 42000000 /boot/exynos4412-odroidu3.dtb +46935 bytes read in 233 ms (196.3 KiB/s) +Odroid # setenv bootargs console=ttySAC1,115200n8 root=/dev/sda2 rootwait +Odroid # bootz 40080000 - 42000000 +Kernel image @ 0x40080000 [ 0x000000 - 0x30bd58 ] +## Flattened Device Tree blob at 42000000 + Booting using the fdt blob at 0x42000000 + Loading Device Tree to 4fff1000, end 4ffff756 ... OK + +Starting kernel ... + +[ 0.000000] Booting Linux on physical CPU 0xa00 + +Please refer to README.usb for additional information. diff --git a/drivers/Makefile b/drivers/Makefile index 7683c61..5ef58c0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -16,6 +16,7 @@ obj-y += twserial/ obj-y += video/ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ +obj-$(CONFIG_U_QE) += qe/ obj-y += memory/ obj-y += pwm/ obj-y += input/ diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index cb46b13..c55eb28 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -618,7 +618,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) #endif cfg->cfg.f_min = 400000; - cfg->cfg.f_max = min(gd->arch.sdhc_clk, (u32)52000000); + cfg->cfg.f_max = min(cfg->sdhc_clk, (u32)52000000); cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 75c2c06..c242214 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,9 +1,16 @@ menu "NAND Device Support" +config SYS_NAND_SELF_INIT + bool + help + This option, if enabled, provides more flexible and linux-like + NAND initialization process. + if !SPL_BUILD config NAND_DENALI bool "Support Denali NAND controller" + select SYS_NAND_SELF_INIT help Enable support for the Denali NAND controller. diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 308b784..9e0429a 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -44,7 +44,7 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; * this macro allows us to convert from an MTD structure to our own * device context (denali) structure. */ -#define mtd_to_denali(m) (((struct nand_chip *)mtd->priv)->priv) +#define mtd_to_denali(m) container_of(m->priv, struct denali_nand_info, nand) /* These constants are defined by the driver to enable common driver * configuration options. */ @@ -1144,70 +1144,128 @@ static void denali_hw_init(struct denali_nand_info *denali) static struct nand_ecclayout nand_oob; -static int denali_nand_init(struct nand_chip *nand) +static int denali_init(struct denali_nand_info *denali) { - struct denali_nand_info *denali; + int ret; - denali = malloc(sizeof(*denali)); - if (!denali) - return -ENOMEM; + denali_hw_init(denali); - nand->priv = denali; + denali->mtd->name = "denali-nand"; + denali->mtd->owner = THIS_MODULE; + denali->mtd->priv = &denali->nand; - denali->flash_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - denali->flash_mem = (void __iomem *)CONFIG_SYS_NAND_DATA_BASE; + /* register the driver with the NAND core subsystem */ + denali->nand.select_chip = denali_select_chip; + denali->nand.cmdfunc = denali_cmdfunc; + denali->nand.read_byte = denali_read_byte; + denali->nand.read_buf = denali_read_buf; + denali->nand.waitfunc = denali_waitfunc; + + /* + * scan for NAND devices attached to the controller + * this is the first stage in a two step process to register + * with the nand subsystem + */ + if (nand_scan_ident(denali->mtd, denali->max_banks, NULL)) { + ret = -ENXIO; + goto fail; + } #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT /* check whether flash got BBT table (located at end of flash). As we * use NAND_BBT_NO_OOB, the BBT page will start with * bbt_pattern. We will have mirror pattern too */ - nand->bbt_options |= NAND_BBT_USE_FLASH; + denali->nand.bbt_options |= NAND_BBT_USE_FLASH; /* * We are using main + spare with ECC support. As BBT need ECC support, * we need to ensure BBT code don't write to OOB for the BBT pattern. * All BBT info will be stored into data area with ECC support. */ - nand->bbt_options |= NAND_BBT_NO_OOB; + denali->nand.bbt_options |= NAND_BBT_NO_OOB; #endif - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.size = CONFIG_NAND_DENALI_ECC_SIZE; - nand->ecc.read_oob = denali_read_oob; - nand->ecc.write_oob = denali_write_oob; - nand->ecc.read_page = denali_read_page; - nand->ecc.read_page_raw = denali_read_page_raw; - nand->ecc.write_page = denali_write_page; - nand->ecc.write_page_raw = denali_write_page_raw; + denali->nand.ecc.mode = NAND_ECC_HW; + denali->nand.ecc.size = CONFIG_NAND_DENALI_ECC_SIZE; + /* * Tell driver the ecc strength. This register may be already set * correctly. So we read this value out. */ - nand->ecc.strength = readl(denali->flash_reg + ECC_CORRECTION); - switch (nand->ecc.size) { + denali->nand.ecc.strength = readl(denali->flash_reg + ECC_CORRECTION); + switch (denali->nand.ecc.size) { case 512: - nand->ecc.bytes = (nand->ecc.strength * 13 + 15) / 16 * 2; + denali->nand.ecc.bytes = + (denali->nand.ecc.strength * 13 + 15) / 16 * 2; break; case 1024: - nand->ecc.bytes = (nand->ecc.strength * 14 + 15) / 16 * 2; + denali->nand.ecc.bytes = + (denali->nand.ecc.strength * 14 + 15) / 16 * 2; break; default: pr_err("Unsupported ECC size\n"); - return -EINVAL; + ret = -EINVAL; + goto fail; } - nand_oob.eccbytes = nand->ecc.bytes; - nand->ecc.layout = &nand_oob; - - /* Set address of hardware control function */ - nand->cmdfunc = denali_cmdfunc; - nand->read_byte = denali_read_byte; - nand->read_buf = denali_read_buf; - nand->select_chip = denali_select_chip; - nand->waitfunc = denali_waitfunc; - denali_hw_init(denali); - return 0; + nand_oob.eccbytes = denali->nand.ecc.bytes; + denali->nand.ecc.layout = &nand_oob; + + writel(denali->mtd->erasesize / denali->mtd->writesize, + denali->flash_reg + PAGES_PER_BLOCK); + writel(denali->nand.options & NAND_BUSWIDTH_16 ? 1 : 0, + denali->flash_reg + DEVICE_WIDTH); + writel(denali->mtd->writesize, + denali->flash_reg + DEVICE_MAIN_AREA_SIZE); + writel(denali->mtd->oobsize, + denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + if (readl(denali->flash_reg + DEVICES_CONNECTED) == 0) + writel(1, denali->flash_reg + DEVICES_CONNECTED); + + /* override the default operations */ + denali->nand.ecc.read_page = denali_read_page; + denali->nand.ecc.read_page_raw = denali_read_page_raw; + denali->nand.ecc.write_page = denali_write_page; + denali->nand.ecc.write_page_raw = denali_write_page_raw; + denali->nand.ecc.read_oob = denali_read_oob; + denali->nand.ecc.write_oob = denali_write_oob; + + if (nand_scan_tail(denali->mtd)) { + ret = -ENXIO; + goto fail; + } + + ret = nand_register(0); + +fail: + return ret; +} + +static int __board_nand_init(void) +{ + struct denali_nand_info *denali; + + denali = kzalloc(sizeof(*denali), GFP_KERNEL); + if (!denali) + return -ENOMEM; + + /* + * If CONFIG_SYS_NAND_SELF_INIT is defined, each driver is responsible + * for instantiating struct nand_chip, while drivers/mtd/nand/nand.c + * still provides a "struct mtd_info nand_info" instance. + */ + denali->mtd = &nand_info[0]; + + /* + * In the future, these base addresses should be taken from + * Device Tree or platform data. + */ + denali->flash_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + denali->flash_mem = (void __iomem *)CONFIG_SYS_NAND_DATA_BASE; + + return denali_init(denali); } -int board_nand_init(struct nand_chip *chip) +void board_nand_init(void) { - return denali_nand_init(chip); + if (__board_nand_init() < 0) + pr_warn("Failed to initialize Denali NAND controller.\n"); } diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 3277da7..a258df0 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -434,9 +434,8 @@ struct nand_buf { #define DT 3 struct denali_nand_info { - struct mtd_info mtd; - struct nand_chip *nand; - + struct mtd_info *mtd; + struct nand_chip nand; int flash_bank; /* currently selected chip */ int status; int platform; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 0b6e7ee..70e780c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -634,6 +634,11 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, { struct nand_chip *chip = mtd->priv; + if (!(chip->options & NAND_BBT_SCANNED)) { + chip->scan_bbt(mtd); + chip->options |= NAND_BBT_SCANNED; + } + if (!chip->bbt) return chip->block_bad(mtd, ofs, getchip); @@ -4322,10 +4327,9 @@ int nand_scan_tail(struct mtd_info *mtd) /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) - return 0; + chip->options |= NAND_BBT_SCANNED; - /* Build bad block table */ - return chip->scan_bbt(mtd); + return 0; } EXPORT_SYMBOL(nand_scan_tail); diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c index db87d07..b3a2a60 100644 --- a/drivers/mtd/nand/s3c2410_nand.c +++ b/drivers/mtd/nand/s3c2410_nand.c @@ -38,10 +38,10 @@ static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) } #endif -static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +static void s3c24x0_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *chip = mtd->priv; - struct s3c2410_nand *nand = s3c2410_get_base_nand(); + struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl); @@ -67,35 +67,35 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) writeb(cmd, chip->IO_ADDR_W); } -static int s3c2410_dev_ready(struct mtd_info *mtd) +static int s3c24x0_dev_ready(struct mtd_info *mtd) { - struct s3c2410_nand *nand = s3c2410_get_base_nand(); + struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); debug("dev_ready\n"); return readl(&nand->nfstat) & 0x01; } #ifdef CONFIG_S3C2410_NAND_HWECC -void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) +void s3c24x0_nand_enable_hwecc(struct mtd_info *mtd, int mode) { - struct s3c2410_nand *nand = s3c2410_get_base_nand(); - debug("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode); + struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); + debug("s3c24x0_nand_enable_hwecc(%p, %d)\n", mtd, mode); writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC, &nand->nfconf); } -static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, +static int s3c24x0_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { - struct s3c2410_nand *nand = s3c2410_get_base_nand(); + struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); ecc_code[0] = readb(&nand->nfecc); ecc_code[1] = readb(&nand->nfecc + 1); ecc_code[2] = readb(&nand->nfecc + 2); - debug("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", - mtd , ecc_code[0], ecc_code[1], ecc_code[2]); + debug("s3c24x0_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", + mtd , ecc_code[0], ecc_code[1], ecc_code[2]); return 0; } -static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, +static int s3c24x0_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { if (read_ecc[0] == calc_ecc[0] && @@ -103,7 +103,7 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, read_ecc[2] == calc_ecc[2]) return 0; - printf("s3c2410_nand_correct_data: not implemented\n"); + printf("s3c24x0_nand_correct_data: not implemented\n"); return -1; } #endif @@ -113,7 +113,7 @@ int board_nand_init(struct nand_chip *nand) u_int32_t cfg; u_int8_t tacls, twrph0, twrph1; struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - struct s3c2410_nand *nand_reg = s3c2410_get_base_nand(); + struct s3c24x0_nand *nand_reg = s3c24x0_get_base_nand(); debug("board_nand_init()\n"); @@ -149,14 +149,14 @@ int board_nand_init(struct nand_chip *nand) #endif /* hwcontrol always must be implemented */ - nand->cmd_ctrl = s3c2410_hwcontrol; + nand->cmd_ctrl = s3c24x0_hwcontrol; - nand->dev_ready = s3c2410_dev_ready; + nand->dev_ready = s3c24x0_dev_ready; #ifdef CONFIG_S3C2410_NAND_HWECC - nand->ecc.hwctl = s3c2410_nand_enable_hwecc; - nand->ecc.calculate = s3c2410_nand_calculate_ecc; - nand->ecc.correct = s3c2410_nand_correct_data; + nand->ecc.hwctl = s3c24x0_nand_enable_hwecc; + nand->ecc.calculate = s3c24x0_nand_calculate_ecc; + nand->ecc.correct = s3c24x0_nand_correct_data; nand->ecc.mode = NAND_ECC_HW; nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 7feb3a7..928d58b 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -611,6 +611,9 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); } + /* Disable subpage writes as we do not provide ecc->hwctl */ + chip->options |= NAND_NO_SUBPAGE_WRITE; + chip->dev_ready = vf610_nfc_dev_ready; chip->cmdfunc = vf610_nfc_command; chip->read_byte = vf610_nfc_read_byte; diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 218a5ed..137886c 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -39,9 +39,14 @@ static void dtsec_configure_serdes(struct fm_eth *priv) u32 value; struct mii_dev bus; bus.priv = priv->mac->phyregs; + bool sgmii_2500 = (priv->enet_if == + PHY_INTERFACE_MODE_SGMII_2500) ? true : false; + + /* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */ + value = PHY_SGMII_IF_MODE_SGMII; + if (!sgmii_2500) + value |= PHY_SGMII_IF_MODE_AN; - /* SGMII IF mode + AN enable */ - value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII; memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value); /* Dev ability according to SGMII specification */ @@ -54,7 +59,9 @@ static void dtsec_configure_serdes(struct fm_eth *priv) memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40); /* Restart AN */ - value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN; + value = PHY_SGMII_CR_DEF_VAL; + if (!sgmii_2500) + value |= PHY_SGMII_CR_RESET_AN; memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value); #else struct dtsec *regs = priv->mac->base; @@ -83,7 +90,8 @@ static void dtsec_init_phy(struct eth_device *dev) out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); #endif - if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) + if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII || + fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII_2500) dtsec_configure_serdes(fm_eth); } diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c index df1fd91..95b1a57 100644 --- a/drivers/power/pmic/pmic_max77686.c +++ b/drivers/power/pmic/pmic_max77686.c @@ -42,11 +42,30 @@ static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV) return 0; } +static int max77686_buck_volt2hex(int buck, ulong uV) +{ + int hex = 0; + + if (buck < 5 || buck > 9) { + debug("%s: buck %d is not supported\n", __func__, buck); + return -EINVAL; + } + + hex = (uV - 750000) / 50000; + + if (hex >= 0 && hex <= MAX77686_BUCK_VOLT_MAX_HEX) + return hex; + + debug("%s: %ld is wrong voltage value for BUCK%d\n", + __func__, uV, buck); + return -EINVAL; +} + int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV) { unsigned int val, ret, hex, adr; - if (ldo < 1 && ldo > 26) { + if (ldo < 1 || ldo > 26) { printf("%s: %d is wrong ldo number\n", __func__, ldo); return -1; } @@ -68,11 +87,38 @@ int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV) return ret; } +int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV) +{ + unsigned int val, adr; + int hex, ret; + + if (buck < 5 || buck > 9) { + printf("%s: %d is an unsupported bucket number\n", + __func__, buck); + return -EINVAL; + } + + adr = max77686_buck_addr[buck] + 1; + hex = max77686_buck_volt2hex(buck, uV); + + if (hex < 0) + return hex; + + ret = pmic_reg_read(p, adr, &val); + if (ret) + return ret; + + val &= ~MAX77686_BUCK_VOLT_MASK; + ret |= pmic_reg_write(p, adr, val | hex); + + return ret; +} + int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode) { unsigned int val, ret, adr, mode; - if (ldo < 1 && 26 < ldo) { + if (ldo < 1 || 26 < ldo) { printf("%s: %d is wrong ldo number\n", __func__, ldo); return -1; } @@ -157,7 +203,7 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode) /* mode */ switch (opmode) { case OPMODE_OFF: - mode = MAX77686_BUCK_MODE_OFF; + mode = MAX77686_BUCK_MODE_OFF << mode_shift; break; case OPMODE_STANDBY: switch (buck) { diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile index 7f1bd06..8fa4866 100644 --- a/drivers/qe/Makefile +++ b/drivers/qe/Makefile @@ -4,5 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_U_QE) += qe.o obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c index d9a7d82..dfae4bf 100644 --- a/drivers/qe/fdt.c +++ b/drivers/qe/fdt.c @@ -12,6 +12,7 @@ #include <fdt_support.h> #include "qe.h" +#ifdef CONFIG_QE DECLARE_GLOBAL_DATA_PTR; /* @@ -72,3 +73,4 @@ void ft_qe_setup(void *blob) "clock-frequency", gd->arch.qe_clk / 2, 1); fdt_fixup_qe_firmware(blob); } +#endif diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 4358a91..bc94673 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -40,6 +40,7 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) return; } +#ifdef CONFIG_QE uint qe_muram_alloc(uint size, uint align) { uint retloc; @@ -70,6 +71,7 @@ uint qe_muram_alloc(uint size, uint align) return retloc; } +#endif void *qe_muram_addr(uint offset) { @@ -180,6 +182,17 @@ void qe_init(uint qe_base) qe_snums_init(); } +#ifdef CONFIG_U_QE +void u_qe_init(void) +{ + uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */ + qe_immr = (qe_map_t *)qe_base; + + u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); + out_be32(&qe_immr->iram.iready, QE_IRAM_READY); +} +#endif + void qe_reset(void) { qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, @@ -212,6 +225,7 @@ void qe_assign_page(uint snum, uint para_ram_base) #define BRG_CLK (gd->arch.brg_clk) +#ifdef CONFIG_QE int qe_set_brg(uint brg, uint rate) { volatile uint *bp; @@ -239,6 +253,7 @@ int qe_set_brg(uint brg, uint rate) return 0; } +#endif /* Set ethernet MII clock master */ @@ -429,6 +444,131 @@ int qe_upload_firmware(const struct qe_firmware *firmware) return 0; } +#ifdef CONFIG_U_QE +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See docs/README.qe_firmware for information on QE microcode uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int u_qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; +#ifdef CONFIG_DEEP_SLEEP + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif + if (!firmware) { + printf("Invalid address\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printf("Not a microcode\n"); +#ifdef CONFIG_DEEP_SLEEP + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE); +#endif + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printf("Unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printf("Invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(u32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(u32)) { + printf("Invalid length\n"); + return -EPERM; + } + + /* + * Validate the CRC. We would normally call crc32_no_comp(), but that + * function isn't available unless you turn on JFFS support. + */ + crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size)); + if (crc != (crc32(-1, (const void *)firmware, calc_size) ^ -1)) { + printf("Firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) { + out_be16(&qe_immr->cp.cercr, + in_be16(&qe_immr->cp.cercr) | QE_CP_CERCR_CIR); + } + + if (firmware->soc.model) + printf("Firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printf("Firmware '%s'\n", firmware->id); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + return 0; +} +#endif + struct qe_firmware_info *qe_get_firmware_info(void) { return qe_firmware_uploaded ? &qe_firmware_info : NULL; diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h index ebb7c5f..33878f8 100644 --- a/drivers/qe/qe.h +++ b/drivers/qe/qe.h @@ -285,4 +285,9 @@ void ft_qe_setup(void *blob); void qe_init(uint qe_base); void qe_reset(void); +#ifdef CONFIG_U_QE +void u_qe_init(void); +int u_qe_upload_firmware(const struct qe_firmware *firmware); +#endif + #endif /* __QE_H__ */ diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index 6046efb..e8a1608 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -11,6 +11,7 @@ #include <dm/device.h> #include <dm/platform_data/serial-uniphier.h> #include <serial.h> +#include <fdtdec.h> #define UART_REG(x) \ u8 x; \ @@ -113,19 +114,21 @@ static int uniphier_serial_remove(struct udevice *dev) } #ifdef CONFIG_OF_CONTROL -static const struct udevice_id uniphier_uart_of_match = { - { .compatible = "panasonic,uniphier-uart"}, +static const struct udevice_id uniphier_uart_of_match[] = { + { .compatible = "panasonic,uniphier-uart" }, {}, }; static int uniphier_serial_ofdata_to_platdata(struct udevice *dev) { - /* - * TODO: Masahiro Yamada (yamada.m@jp.panasonic.com) - * - * Implement conversion code from DTB to platform data - * when supporting CONFIG_OF_CONTROL on UniPhir platform. - */ + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); + DECLARE_GLOBAL_DATA_PTR; + + plat->base = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + plat->uartclk = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "clock-frequency", 0); + + return 0; } #endif diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index edd91a8..6fdbf57 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -85,15 +85,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) } #endif -/* Setup the EHCI host controller. */ -static void setup_usb_phy(struct exynos_usb_phy *usb) +static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb) { u32 hsic_ctrl; - set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); - - set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); - clrbits_le32(&usb->usbphyctrl0, HOST_CTRL0_FSEL_MASK | HOST_CTRL0_COMMONON_N | @@ -150,8 +145,34 @@ static void setup_usb_phy(struct exynos_usb_phy *usb) EHCICTRL_ENAINCR16); } -/* Reset the EHCI host controller. */ -static void reset_usb_phy(struct exynos_usb_phy *usb) +static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb) +{ + writel(CLK_24MHZ, &usb->usbphyclk); + + clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | + PHYPWR_NORMAL_MASK_PHY0)); + + setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); + udelay(10); + clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); +} + +static void setup_usb_phy(struct exynos_usb_phy *usb) +{ + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); + + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); + + if (cpu_is_exynos5()) + exynos5_setup_usb_phy(usb); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_setup_usb_phy((struct exynos4412_usb_phy *) + usb); +} + +static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb) { u32 hsic_ctrl; @@ -171,6 +192,24 @@ static void reset_usb_phy(struct exynos_usb_phy *usb) setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); +} + +static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb) +{ + setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | + PHYPWR_NORMAL_MASK_PHY0)); +} + +/* Reset the EHCI host controller. */ +static void reset_usb_phy(struct exynos_usb_phy *usb) +{ + if (cpu_is_exynos5()) + exynos5_reset_usb_phy(usb); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_reset_usb_phy((struct exynos4412_usb_phy *) + usb); set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE); } diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 45062e6..8f55464 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -14,7 +14,7 @@ #include <asm/io.h> #include <usb/ehci-fsl.h> #include <hwconfig.h> -#include <asm/fsl_errata.h> +#include <fsl_usb.h> #include "ehci.h" @@ -130,8 +130,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, in_le32(&ehci->usbmode); - if (SVR_SOC_VER(get_svr()) == SVR_T4240 && - IS_SVR_REV(get_svr(), 2, 0)) + if (has_erratum_a007798()) set_txfifothresh(ehci, TXFIFOTHRESH); return 0; diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c index 77f6c9d..32a4375 100644 --- a/drivers/usb/host/ehci-uniphier.c +++ b/drivers/usb/host/ehci-uniphier.c @@ -6,10 +6,43 @@ */ #include <common.h> +#include <linux/err.h> #include <usb.h> #include <asm/arch/ehci-uniphier.h> #include "ehci.h" +#ifdef CONFIG_OF_CONTROL +#include <fdtdec.h> +DECLARE_GLOBAL_DATA_PTR; + +#define FDT gd->fdt_blob +#define COMPAT "panasonic,uniphier-ehci" + +static int get_uniphier_ehci_base(int index, struct ehci_hccr **base) +{ + int offset; + + for (offset = fdt_node_offset_by_compatible(FDT, 0, COMPAT); + offset >= 0; + offset = fdt_node_offset_by_compatible(FDT, offset, COMPAT)) { + if (index == 0) { + *base = (struct ehci_hccr *) + fdtdec_get_addr(FDT, offset, "reg"); + return 0; + } + index--; + } + + return -ENODEV; /* not found */ +} +#else +static int get_uniphier_ehci_base(int index, struct ehci_hccr **base) +{ + *base = (struct ehci_hccr *)uniphier_ehci_platdata[index].base; + return 0; +} +#endif + /* * Create the appropriate control structures to manage * a new EHCI host controller. @@ -17,12 +50,15 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { + int ret; struct ehci_hccr *cr; struct ehci_hcor *or; uniphier_ehci_reset(index, 0); - cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base); + ret = get_uniphier_ehci_base(index, &cr); + if (ret < 0) + return ret; or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase)); *hccr = cr; diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 000f389..00b563f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o obj-$(CONFIG_VIDEO_SED13806) += sed13806.o obj-$(CONFIG_VIDEO_SM501) += sm501.o obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o +obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o obj-$(CONFIG_VIDEO_TEGRA) += tegra.o obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o obj-$(CONFIG_VIDEO_X86) += x86_fb.o diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c new file mode 100644 index 0000000..d241397 --- /dev/null +++ b/drivers/video/sunxi_display.c @@ -0,0 +1,451 @@ +/* + * Display driver for Allwinner SoCs. + * + * (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be> + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include <asm/arch/clock.h> +#include <asm/arch/display.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <fdtdec.h> +#include <fdt_support.h> +#include <linux/fb.h> +#include <video_fb.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct sunxi_display { + GraphicDevice graphic_device; + bool enabled; +} sunxi_display; + +static int sunxi_hdmi_hpd_detect(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + + /* Set pll3 to 300MHz */ + clock_set_pll3(300000000); + + /* Set hdmi parent to pll3 */ + clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK, + CCM_HDMI_CTRL_PLL3); + + /* Set ahb gating to pass */ +#ifdef CONFIG_MACH_SUN6I + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); +#endif + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); + + /* Clock on */ + setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); + + writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl); + writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0); + + udelay(1000); + + if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT) + return 1; + + /* No need to keep these running */ + clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE); + clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); + clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); +#ifdef CONFIG_MACH_SUN6I + clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); +#endif + clock_set_pll3(0); + + return 0; +} + +/* + * This is the entity that mixes and matches the different layers and inputs. + * Allwinner calls it the back-end, but i like composer better. + */ +static void sunxi_composer_init(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_de_be_reg * const de_be = + (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + int i; + +#ifdef CONFIG_MACH_SUN6I + /* Reset off */ + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0); +#endif + + /* Clocks on */ + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0); + setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0); + clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000); + + /* Engine bug, clear registers after reset */ + for (i = 0x0800; i < 0x1000; i += 4) + writel(0, SUNXI_DE_BE0_BASE + i); + + setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE); +} + +static void sunxi_composer_mode_set(struct fb_videomode *mode, + unsigned int address) +{ + struct sunxi_de_be_reg * const de_be = + (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + + writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), + &de_be->disp_size); + writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), + &de_be->layer0_size); + writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride); + writel(address << 3, &de_be->layer0_addr_low32b); + writel(address >> 29, &de_be->layer0_addr_high4b); + writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl); + + setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE); +} + +/* + * LCDC, what allwinner calls a CRTC, so timing controller and serializer. + */ +static void sunxi_lcdc_pll_set(int dotclock, int *clk_div, int *clk_double) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int value, n, m, diff; + int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; + int best_double = 0; + + /* + * Find the lowest divider resulting in a matching clock, if there + * is no match, pick the closest lower clock, as monitors tend to + * not sync to higher frequencies. + */ + for (m = 15; m > 0; m--) { + n = (m * dotclock) / 3000; + + if ((n >= 9) && (n <= 127)) { + value = (3000 * n) / m; + diff = dotclock - value; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n = n; + best_double = 0; + } + } + + /* These are just duplicates */ + if (!(m & 1)) + continue; + + n = (m * dotclock) / 6000; + if ((n >= 9) && (n <= 127)) { + value = (6000 * n) / m; + diff = dotclock - value; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n = n; + best_double = 1; + } + } + } + + debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n", + dotclock, (best_double + 1) * 3000 * best_n / best_m, + best_double + 1, best_n, best_m); + + clock_set_pll3(best_n * 3000000); + + writel(CCM_LCD_CH1_CTRL_GATE | + (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : CCM_LCD_CH1_CTRL_PLL3) | + CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); + + *clk_div = best_m; + *clk_double = best_double; +} + +static void sunxi_lcdc_init(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_lcdc_reg * const lcdc = + (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + + /* Reset off */ +#ifdef CONFIG_MACH_SUN6I + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0); +#else + setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST); +#endif + + /* Clock on */ + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0); + + /* Init lcdc */ + writel(0, &lcdc->ctrl); /* Disable tcon */ + writel(0, &lcdc->int0); /* Disable all interrupts */ + + /* Disable tcon0 dot clock */ + clrbits_le32(&lcdc->tcon0_dclk, SUNXI_LCDC_TCON0_DCLK_ENABLE); + + /* Set all io lines to tristate */ + writel(0xffffffff, &lcdc->tcon0_io_tristate); + writel(0xffffffff, &lcdc->tcon1_io_tristate); +} + +static void sunxi_lcdc_mode_set(struct fb_videomode *mode, + int *clk_div, int *clk_double) +{ + struct sunxi_lcdc_reg * const lcdc = + (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + int bp, total; + + /* Use tcon1 */ + clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK, + SUNXI_LCDC_CTRL_IO_MAP_TCON1); + + /* Enabled, 0x1e start delay */ + writel(SUNXI_LCDC_TCON1_CTRL_ENABLE | + SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(0x1e), &lcdc->tcon1_ctrl); + + writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres), + &lcdc->tcon1_timing_source); + writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres), + &lcdc->tcon1_timing_scale); + writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres), + &lcdc->tcon1_timing_out); + + bp = mode->hsync_len + mode->left_margin; + total = mode->xres + mode->right_margin + bp; + writel(SUNXI_LCDC_TCON1_TIMING_H_TOTAL(total) | + SUNXI_LCDC_TCON1_TIMING_H_BP(bp), &lcdc->tcon1_timing_h); + + bp = mode->vsync_len + mode->upper_margin; + total = mode->yres + mode->lower_margin + bp; + writel(SUNXI_LCDC_TCON1_TIMING_V_TOTAL(total) | + SUNXI_LCDC_TCON1_TIMING_V_BP(bp), &lcdc->tcon1_timing_v); + + writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len), + &lcdc->tcon1_timing_sync); + + sunxi_lcdc_pll_set(mode->pixclock, clk_div, clk_double); +} + +#ifdef CONFIG_MACH_SUN6I +static void sunxi_drc_init(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* On sun6i the drc must be clocked even when in pass-through mode */ + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0); + clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000); +} +#endif + +static void sunxi_hdmi_mode_set(struct fb_videomode *mode, + int clk_div, int clk_double) +{ + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + int x, y; + + /* Write clear interrupt status bits */ + writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq); + + /* Init various registers, select pll3 as clock source */ + writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity); + writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0); + writel(SUNXI_HDMI_PAD_CTRL1, &hdmi->pad_ctrl1); + writel(SUNXI_HDMI_PLL_CTRL, &hdmi->pll_ctrl); + writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0); + + /* Setup clk div and doubler */ + clrsetbits_le32(&hdmi->pll_ctrl, SUNXI_HDMI_PLL_CTRL_DIV_MASK, + SUNXI_HDMI_PLL_CTRL_DIV(clk_div)); + if (!clk_double) + setbits_le32(&hdmi->pad_ctrl1, SUNXI_HDMI_PAD_CTRL1_HALVE); + + /* Setup timing registers */ + writel(SUNXI_HDMI_Y(mode->yres) | SUNXI_HDMI_X(mode->xres), + &hdmi->video_size); + + x = mode->hsync_len + mode->left_margin; + y = mode->vsync_len + mode->upper_margin; + writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_bp); + + x = mode->right_margin; + y = mode->lower_margin; + writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_fp); + + x = mode->hsync_len; + y = mode->vsync_len; + writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_spw); + + if (mode->sync & FB_SYNC_HOR_HIGH_ACT) + setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_HOR); + + if (mode->sync & FB_SYNC_VERT_HIGH_ACT) + setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_VER); +} + +static void sunxi_engines_init(void) +{ + sunxi_composer_init(); + sunxi_lcdc_init(); +#ifdef CONFIG_MACH_SUN6I + sunxi_drc_init(); +#endif +} + +static void sunxi_mode_set(struct fb_videomode *mode, unsigned int address) +{ + struct sunxi_de_be_reg * const de_be = + (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + struct sunxi_lcdc_reg * const lcdc = + (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + int clk_div, clk_double; + int retries = 3; + +retry: + clrbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE); + clrbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE); + clrbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); + + sunxi_composer_mode_set(mode, address); + sunxi_lcdc_mode_set(mode, &clk_div, &clk_double); + sunxi_hdmi_mode_set(mode, clk_div, clk_double); + + setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS); + setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); + + udelay(1000000 / mode->refresh + 500); + + setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE); + + udelay(1000000 / mode->refresh + 500); + + setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE); + + udelay(1000000 / mode->refresh + 500); + + /* + * Sometimes the display pipeline does not sync up properly, if + * this happens the hdmi fifo underrun or overrun bits are set. + */ + if (readl(&hdmi->irq) & + (SUNXI_HDMI_IRQ_STATUS_FIFO_UF | SUNXI_HDMI_IRQ_STATUS_FIFO_OF)) { + if (retries--) + goto retry; + printf("HDMI fifo under or overrun\n"); + } +} + +void *video_hw_init(void) +{ + static GraphicDevice *graphic_device = &sunxi_display.graphic_device; + /* + * Vesa standard 1024x768@60 + * 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync + */ + struct fb_videomode mode = { + .name = "1024x768", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 65000, + .left_margin = 160, + .right_margin = 24, + .upper_margin = 29, + .lower_margin = 3, + .hsync_len = 136, + .vsync_len = 6, + .sync = 0, + .vmode = 0, + .flag = 0, + }; + int ret; + + memset(&sunxi_display, 0, sizeof(struct sunxi_display)); + + printf("Reserved %dkB of RAM for Framebuffer.\n", + CONFIG_SUNXI_FB_SIZE >> 10); + gd->fb_base = gd->ram_top; + + ret = sunxi_hdmi_hpd_detect(); + if (!ret) + return NULL; + + printf("HDMI connected.\n"); + sunxi_display.enabled = true; + + printf("Setting up a %s console.\n", mode.name); + sunxi_engines_init(); + sunxi_mode_set(&mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE); + + /* + * These are the only members of this structure that are used. All the + * others are driver specific. There is nothing to decribe pitch or + * stride, but we are lucky with our hw. + */ + graphic_device->frameAdrs = gd->fb_base; + graphic_device->gdfIndex = GDF_32BIT_X888RGB; + graphic_device->gdfBytesPP = 4; + graphic_device->winSizeX = mode.xres; + graphic_device->winSizeY = mode.yres; + + return graphic_device; +} + +/* + * Simplefb support. + */ +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB) +int sunxi_simplefb_setup(void *blob) +{ + static GraphicDevice *graphic_device = &sunxi_display.graphic_device; + int offset, ret; + + if (!sunxi_display.enabled) + return 0; + + /* Find a framebuffer node, with pipeline == "de_be0-lcd0-hdmi" */ + offset = fdt_node_offset_by_compatible(blob, -1, + "allwinner,simple-framebuffer"); + while (offset >= 0) { + ret = fdt_find_string(blob, offset, "allwinner,pipeline", + "de_be0-lcd0-hdmi"); + if (ret == 0) + break; + offset = fdt_node_offset_by_compatible(blob, offset, + "allwinner,simple-framebuffer"); + } + if (offset < 0) { + eprintf("Cannot setup simplefb: node not found\n"); + return 0; /* Keep older kernels working */ + } + + ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base, + graphic_device->winSizeX, graphic_device->winSizeY, + graphic_device->winSizeX * graphic_device->gdfBytesPP, + "x8r8g8b8"); + if (ret) + eprintf("Cannot setup simplefb: Error setting properties\n"); + + return ret; +} +#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */ diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 943b5bc..258b937 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -25,6 +25,7 @@ #include <ext_common.h> #include <ext4fs.h> #include "ext4_common.h" +#include <div64.h> int ext4fs_symlinknest; struct ext_filesystem ext_fs; @@ -67,11 +68,11 @@ int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, if (len > filesize) len = filesize; - blockcnt = ((len + pos) + blocksize - 1) / blocksize; + blockcnt = lldiv(((len + pos) + blocksize - 1), blocksize); - for (i = pos / blocksize; i < blockcnt; i++) { + for (i = lldiv(pos, blocksize); i < blockcnt; i++) { lbaint_t blknr; - int blockoff = pos % blocksize; + int blockoff = pos - (blocksize * i); int blockend = blocksize; int skipfirst = 0; blknr = read_allocated_block(&(node->inode), i); @@ -82,7 +83,7 @@ int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, /* Last block. */ if (i == blockcnt - 1) { - blockend = (len + pos) % blocksize; + blockend = (len + pos) - (blocksize * i); /* The last portion is exactly blocksize. */ if (!blockend) @@ -90,7 +91,7 @@ int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, } /* First block. */ - if (i == pos / blocksize) { + if (i == lldiv(pos, blocksize)) { skipfirst = blockoff; blockend -= skipfirst; } diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c index 88dd495..98b88ad 100644 --- a/fs/fat/fat_write.c +++ b/fs/fat/fat_write.c @@ -13,6 +13,8 @@ #include <asm/byteorder.h> #include <part.h> #include <linux/ctype.h> +#include <div64.h> +#include <linux/math64.h> #include "fat.c" static void uppercase(char *str, int len) @@ -770,7 +772,7 @@ static void fill_dentry(fsdata *mydata, dir_entry *dentptr, */ static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size) { - __u32 startsect, sect_num; + __u32 startsect, sect_num, offset; if (clustnum > 0) { startsect = mydata->data_begin + @@ -779,13 +781,13 @@ static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size) startsect = mydata->rootdir_sect; } - sect_num = size / mydata->sect_size; - if (size % mydata->sect_size) + sect_num = div_u64_rem(size, mydata->sect_size, &offset); + + if (offset != 0) sect_num++; if (startsect + sect_num > cur_part_info.start + total_sector) return -1; - return 0; } @@ -23,6 +23,8 @@ #include <fs.h> #include <sandboxfs.h> #include <asm/io.h> +#include <div64.h> +#include <linux/math64.h> DECLARE_GLOBAL_DATA_PTR; @@ -399,7 +401,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], printf("%llu bytes read in %lu ms", len_read, time); if (time > 0) { puts(" ("); - print_size(len_read / time * 1000, "/s"); + print_size(div_u64(len_read, time) * 1000, "/s"); puts(")"); } puts("\n"); @@ -469,7 +471,7 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], printf("%llu bytes written in %lu ms", len, time); if (time > 0) { puts(" ("); - print_size(len / time * 1000, "/s"); + print_size(div_u64(len, time) * 1000, "/s"); puts(")"); } puts("\n"); diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 695e47b..832c10f 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -387,6 +387,11 @@ extern int board_pci_host_broken(void); #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1d1f4c0..8ed0f7c 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -685,6 +685,11 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index ba3da06..6b29add 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -374,6 +374,49 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off $ubootaddr +$filesize; " \ + "erase $ubootaddr +$filesize; " \ + "cp.b $loadaddr $ubootaddr $filesize; " \ + "protect on $ubootaddr +$filesize; " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p1023rdb.dtb\0" \ + "othbootargs=ramdisk_size=600000\0" \ + "bdev=sda1\0" \ "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + #endif /* __CONFIG_H */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index e639e1d..48b8dc7 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -533,7 +533,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 diff --git a/include/configs/arndale.h b/include/configs/arndale.h index aa6b631..81e8a7c 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -9,6 +9,9 @@ #ifndef __CONFIG_ARNDALE_H #define __CONFIG_ARNDALE_H +#define EXYNOS_FDTFILE_SETTING \ + "fdtfile=exynos5250-arndale.dtb\0" + #include "exynos5250-common.h" /* SD/MMC configuration */ @@ -17,8 +20,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_CMD_EXT2 - /* USB */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index e0bf3dc..8a7447d 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -15,6 +15,9 @@ #define CONFIG_DBAU1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #ifdef CONFIG_DBAU1000 /* Also known as Merlot */ #define CONFIG_SOC_AU1000 1 diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index b258cb9..1f3ee55 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -30,9 +30,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F -/* Enable fdt support */ -#define CONFIG_OF_LIBFDT - /* Keep L2 Cache Disabled */ #define CONFIG_CMD_CACHE @@ -42,7 +39,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING #define CONFIG_ENV_OVERWRITE /* Size of malloc() pool before and after relocation */ @@ -61,7 +57,6 @@ #define CONFIG_EXYNOS_DWMMC #define CONFIG_BOUNCE_BUFFER -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* PWM */ @@ -71,22 +66,16 @@ #include <config_cmd_default.h> #define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE -#define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE #define CONFIG_CMD_FS_GENERIC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION #define CONFIG_CMD_PART #define CONFIG_PARTITION_UUIDS /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ @@ -96,4 +85,6 @@ #define CONFIG_SYS_NO_FLASH #undef CONFIG_CMD_IMLS +#include <config_distro_defaults.h> + #endif /* __CONFIG_H */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index ba591e7..8f9b780 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -47,17 +47,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_CONSOLE_MUX -#define EXYNOS_DEVICE_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - EXYNOS_DEVICE_SETTINGS - -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_NET #define CONFIG_CMD_HASH /* Thermal Management Unit */ @@ -174,12 +163,6 @@ #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ -/* Enable PXE Support */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PXE -#define CONFIG_MENU -#endif - /* SHA hashing */ #define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY @@ -189,8 +172,6 @@ /* Enable Time Command */ #define CONFIG_CMD_TIME -#define CONFIG_CMD_BOOTZ - #define CONFIG_CMD_GPIO /* USB boot mode */ @@ -203,4 +184,41 @@ #define CONFIG_FIT #define CONFIG_FIT_BEST_MATCH + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#ifndef MEM_LAYOUT_ENV_SETTINGS +/* 2GB RAM, bootm size of 256M, load scripts after that */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "bootm_size=0x10000000\0" \ + "kernel_addr_r=0x42000000\0" \ + "fdt_addr_r=0x43000000\0" \ + "ramdisk_addr_r=0x43300000\0" \ + "scriptaddr=0x50000000\0" \ + "pxefile_addr_r=0x51000000\0" +#endif + +#ifndef EXYNOS_DEVICE_SETTINGS +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" +#endif + +#ifndef EXYNOS_FDTFILE_SETTING +#define EXYNOS_FDTFILE_SETTING +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS \ + EXYNOS_FDTFILE_SETTING \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV + #endif /* __CONFIG_EXYNOS5_COMMON_H */ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 66547fa..9cef0b0 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -9,6 +9,13 @@ #ifndef __CONFIG_EXYNOS5_DT_COMMON_H #define __CONFIG_EXYNOS5_DT_COMMON_H +/* Console configuration */ +#undef EXYNOS_DEVICE_SETTINGS +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + #include "exynos5-common.h" /* PMIC */ @@ -22,14 +29,4 @@ #define CONFIG_CMD_CROS_EC #define CONFIG_KEYBOARD -/* Console configuration */ -#undef EXYNOS_DEVICE_SETTINGS -#define EXYNOS_DEVICE_SETTINGS \ - "stdin=serial,cros-ec-keyb\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - EXYNOS_DEVICE_SETTINGS - #endif diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index 713614f..a0107e8 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -29,8 +29,6 @@ #define CONFIG_SPL_TEXT_BASE 0x02023400 -#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" - #define CONFIG_IRAM_STACK 0x02050000 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index b0f940c..ef6e155 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -10,6 +10,8 @@ #define __CONFIG_EXYNOS5420_H #define CONFIG_EXYNOS5420 +/* A variant of Exynos5420 (Exynos5 Family) */ +#define CONFIG_EXYNOS5800 #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SPI_FLASH @@ -38,14 +40,13 @@ #define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024) -#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420" +#define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi" \ + "exynos5420-peach-pit exynos5420-smdk5420" #define CONFIG_MAX_I2C_NUM 11 #define CONFIG_BOARD_REV_GPIO_COUNT 2 -#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000" - #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 /* @@ -54,10 +55,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) -/* DRAM Memory Banks */ -#define CONFIG_NR_DRAM_BANKS 7 -#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ - /* Miscellaneous configurable options */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index b19a60f..48e10ec 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -70,6 +70,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_HAS_SERDES #define CONFIG_FSL_CAAM /* Enable CAAM */ + +#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#define CONFIG_U_QE +#endif + /* * IFC Definitions */ @@ -110,6 +115,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_WRITE_SWAPPED_DATA #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ @@ -274,6 +280,23 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_GENERIC_MMC /* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#endif +#endif + +/* * eTSEC */ #define CONFIG_TSEC_ENET @@ -332,6 +355,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTDELAY 3 +#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 + #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "fdt_high=0xcfffffff\0" \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index e98e102..3eac7ee 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -50,6 +50,10 @@ #define CONFIG_FSL_CAAM /* Enable CAAM */ +#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#define CONFIG_U_QE +#endif + /* * IFC Definitions */ @@ -95,6 +99,7 @@ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_WRITE_SWAPPED_DATA /* CPLD */ @@ -156,6 +161,17 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +/* EEPROM */ +#ifndef CONFIG_SD_BOOT +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#endif + /* * MMC */ @@ -274,6 +290,8 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 + /* * Environment */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index b928af8..807e96b 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -198,6 +198,19 @@ #define CONFIG_CMD_GPIO +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX + /* * Supported Odroid boards: X3, U3 * TODO: Add Odroid X support diff --git a/include/configs/origen.h b/include/configs/origen.h index da9d6a1..8f1e256 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -56,6 +56,10 @@ #undef CONFIG_CMD_PING #define CONFIG_CMD_ELF #define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS @@ -63,7 +67,36 @@ #define COPY_BL2_FNPTR_ADDR 0x02020030 #define CONFIG_SPL_TEXT_BASE 0x02021410 -#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x40007000\0" \ + "rdaddr=0x48000000\0" \ + "kerneladdr=0x40007000\0" \ + "ramdiskaddr=0x48000000\0" \ + "console=ttySAC2,115200n8\0" \ + "mmcdev=0\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "fi; " \ + "fi;" \ + "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " #define CONFIG_IDENT_STRING " for ORIGEN" diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 1c04a58..61e6af3 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -15,6 +15,9 @@ #define CONFIG_PB1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #ifdef CONFIG_PB1000 #define CONFIG_SOC_AU1000 1 #else diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h new file mode 100644 index 0000000..8a82402 --- /dev/null +++ b/include/configs/peach-pi.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * + * Configuration settings for the SAMSUNG/GOOGLE PEACH-PI board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PEACH_PI_H +#define __CONFIG_PEACH_PI_H + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH +#define CONFIG_ENV_SPI_BASE 0x12D30000 +#define FLASH_SIZE (0x4 << 20) +#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) + +#include <configs/exynos5420-common.h> +#include <configs/exynos5-dt-common.h> + +#define CONFIG_BOARD_COMMON + +/* select serial console configuration */ +#define CONFIG_SERIAL3 /* use SERIAL 3 */ + +#define CONFIG_SYS_PROMPT "Peach-Pi # " +#define CONFIG_IDENT_STRING " for Peach-Pi" + +#define CONFIG_VIDEO_PARADE + +/* Display */ +#define CONFIG_LCD +#ifdef CONFIG_LCD +#define CONFIG_EXYNOS_FB +#define CONFIG_EXYNOS_DP +#define LCD_BPP LCD_COLOR16 +#endif + +#define CONFIG_POWER_TPS65090_EC +#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ +#define CONFIG_DM_CROS_EC + +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_EXYNOS + +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + +#endif /* __CONFIG_PEACH_PI_H */ diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 91bd37d..ad5db57 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -23,8 +23,8 @@ /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ -#define CONFIG_SYS_PROMPT "Peach # " -#define CONFIG_IDENT_STRING " for Peach" +#define CONFIG_SYS_PROMPT "Peach-Pit # " +#define CONFIG_IDENT_STRING " for Peach-Pit" #define CONFIG_VIDEO_PARADE @@ -43,4 +43,8 @@ #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 4 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + #endif /* __CONFIG_PEACH_PIT_H */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 98ed8bc..1548d3e 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -13,6 +13,9 @@ #define __CONFIG_H #define CONFIG_QEMU_MIPS + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index e8f5a4c..61cafad 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -13,6 +13,9 @@ #define __CONFIG_H #define CONFIG_QEMU_MIPS + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index b83c15f..71eb81c 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -23,6 +23,8 @@ #define CONFIG_SYS_TEXT_BASE 0x0 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH /* input clock of PLL (the SMDK2410 has 12MHz input clock) */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index fd2d482..5c9a3c0 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -23,4 +23,8 @@ #define CONFIG_IDENT_STRING " for SMDK5420" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ + #endif /* __CONFIG_SMDK5420_H */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 3629587..f6b1b3e 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -23,7 +23,6 @@ #endif #define CONFIG_ARMV7_PSCI 1 -#define CONFIG_ARMV7_PSCI_NR_CPUS 2 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_SYS_CLK_FREQ 24000000 diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index ce038ed..3f890b2 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -197,6 +197,36 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_CMD_GPIO +#ifdef CONFIG_VIDEO +/* + * The amount of RAM that is reserved for the FB. This will not show up as + * RAM to the kernel, but will be reclaimed by a KMS driver in future. + */ +#define CONFIG_SUNXI_FB_SIZE (8 << 20) + +/* Do we want to initialize a simple FB? */ +#define CONFIG_VIDEO_DT_SIMPLEFB + +#define CONFIG_VIDEO_SUNXI + +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO + +/* allow both serial and cfb console. */ +#define CONFIG_CONSOLE_MUX +/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ +#define CONFIG_VGA_AS_SINGLE_DEVICE + +#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) + +/* To be able to hook simplefb into dt */ +#ifdef CONFIG_VIDEO_DT_SIMPLEFB +#define CONFIG_OF_BOARD_SETUP +#endif + +#endif /* CONFIG_VIDEO */ + /* Ethernet support */ #ifdef CONFIG_SUNXI_EMAC #define CONFIG_MII /* MII PHY management */ @@ -217,6 +247,13 @@ #define CONFIG_USB_STORAGE #endif +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_CONSOLE_MUX +#define CONFIG_PREBOOT +#define CONFIG_SYS_STDIO_DEREGISTER +#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \ @@ -225,6 +262,7 @@ #endif #define CONFIG_MISC_INIT_R +#define CONFIG_SYS_CONSOLE_IS_IN_ENV #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> @@ -266,7 +304,31 @@ #include <config_distro_bootcmd.h> +#ifdef CONFIG_USB_KEYBOARD +#define CONSOLE_STDIN_SETTINGS \ + "preboot=usb start\0" \ + "stdin=serial,usbkbd\0" +#else +#define CONSOLE_STDIN_SETTINGS \ + "stdin=serial\0" +#endif + +#ifdef CONFIG_VIDEO +#define CONSOLE_STDOUT_SETTINGS \ + "stdout=serial,vga\0" \ + "stderr=serial,vga\0" +#else +#define CONSOLE_STDOUT_SETTINGS \ + "stdout=serial\0" \ + "stderr=serial\0" +#endif + +#define CONSOLE_ENV_SETTINGS \ + CONSOLE_STDIN_SETTINGS \ + CONSOLE_STDOUT_SETTINGS + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "fdtfile=" CONFIG_FDTFILE "\0" \ "console=ttyS0,115200\0" \ diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index 7c4dba0..2140fcc 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -112,7 +112,6 @@ are defined. Select only one of them." #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -143,15 +142,6 @@ are defined. Select only one of them." */ #define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */ -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_TIME -#define CONFIG_CMD_NAND /* NAND flash suppport */ - #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 #define CONFIG_SYS_NAND_ONFI_DETECTION @@ -167,7 +157,6 @@ are defined. Select only one of them." #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE @@ -225,10 +214,6 @@ are defined. Select only one of them." "add_default_bootargs=setenv bootargs $bootargs" \ " console=ttyS0,$baudrate\0" \ -/* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ - /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT diff --git a/include/configs/vct.h b/include/configs/vct.h index 217ba2f..83e4163 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -25,6 +25,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) diff --git a/include/fdt_support.h b/include/fdt_support.h index 55cef94..1f19fe4 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -64,7 +64,20 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif -void ft_board_setup(void *blob, bd_t *bd); +int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * Add board-specific data to the FDT before booting the OS. + * + * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. + * This function is called if CONFIG_OF_BOARD_SETUP is defined + * + * @param blob FDT blob to update + * @param bd_t Pointer to board data + * @return 0 if ok, or -FDT_ERR_... on error + */ +int ft_board_setup(void *blob, bd_t *bd); + /* * The keystone2 SOC requires all 32 bit aliased addresses to be converted * to their 36 physical format. This has to happen after all fdt nodes @@ -75,6 +88,18 @@ void ft_board_setup_ex(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); +/** + * Add system-specific data to the FDT before booting the OS. + * + * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. + * This function is called if CONFIG_OF_SYSTEM_SETUP is defined + * + * @param blob FDT blob to update + * @param bd_t Pointer to board data + * @return 0 if ok, or -FDT_ERR_... on error + */ +int ft_system_setup(void *blob, bd_t *bd); + void set_working_fdt_addr(void *addr); int fdt_shrink_to_minimum(void *blob); int fdt_increase_size(void *fdt, int add_len); @@ -147,6 +172,9 @@ void of_bus_default_count_cells(void *blob, int parentoffset, int ft_verify_fdt(void *fdt); int arch_fixup_memory_node(void *blob); +int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, + u32 height, u32 stride, const char *format); + #endif /* ifdef CONFIG_OF_LIBFDT */ #ifdef USE_HOSTCC diff --git a/include/fdtdec.h b/include/fdtdec.h index ea92894..c010bd8 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -616,17 +616,33 @@ const u8 *fdtdec_locate_byte_array(const void *blob, int node, * @param blob FDT blob * @param node node to examine * @param prop_name name of property to find - * @param ptrp returns pointer to region, or NULL if no address - * @param size returns size of region - * @return 0 if ok, -1 on error (propery not found) + * @param basep Returns base address of region + * @param size Returns size of region + * @return 0 if ok, -1 on error (property not found) */ -int fdtdec_decode_region(const void *blob, int node, - const char *prop_name, void **ptrp, size_t *size); +int fdtdec_decode_region(const void *blob, int node, const char *prop_name, + fdt_addr_t *basep, fdt_size_t *sizep); + +enum fmap_compress_t { + FMAP_COMPRESS_NONE, + FMAP_COMPRESS_LZO, +}; + +enum fmap_hash_t { + FMAP_HASH_NONE, + FMAP_HASH_SHA1, + FMAP_HASH_SHA256, +}; /* A flash map entry, containing an offset and length */ struct fmap_entry { uint32_t offset; uint32_t length; + uint32_t used; /* Number of bytes used in region */ + enum fmap_compress_t compress_algo; /* Compression type */ + enum fmap_hash_t hash_algo; /* Hash algorithm */ + const uint8_t *hash; /* Hash value */ + int hash_size; /* Hash size */ }; /** @@ -682,4 +698,31 @@ int fdt_get_named_resource(const void *fdt, int node, const char *property, */ int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf); +/** + * Decode a named region within a memory bank of a given type. + * + * This function handles selection of a memory region. The region is + * specified as an offset/size within a particular type of memory. + * + * The properties used are: + * + * <mem_type>-memory<suffix> for the name of the memory bank + * <mem_type>-offset<suffix> for the offset in that bank + * + * The property value must have an offset and a size. The function checks + * that the region is entirely within the memory bank.5 + * + * @param blob FDT blob + * @param node Node containing the properties (-1 for /config) + * @param mem_type Type of memory to use, which is a name, such as + * "u-boot" or "kernel". + * @param suffix String to append to the memory/offset + * property names + * @param basep Returns base of region + * @param sizep Returns size of region + * @return 0 if OK, -ive on error + */ +int fdtdec_decode_memory_region(const void *blob, int node, + const char *mem_type, const char *suffix, + fdt_addr_t *basep, fdt_size_t *sizep); #endif diff --git a/include/fsl_usb.h b/include/fsl_usb.h index 1a6c9c1..e4902aa 100644 --- a/include/fsl_usb.h +++ b/include/fsl_usb.h @@ -85,4 +85,81 @@ struct ccsr_usb_phy { #define CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07 #endif +/* USB Erratum Checking code */ +#ifdef CONFIG_PPC +static inline bool has_erratum_a006261(void) +{ + u32 svr = get_svr(); + u32 soc = SVR_SOC_VER(svr); + + switch (soc) { + case SVR_P1010: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_P2041: + case SVR_P2040: + return IS_SVR_REV(svr, 1, 0) || + IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1); + case SVR_P3041: + return IS_SVR_REV(svr, 1, 0) || + IS_SVR_REV(svr, 1, 1) || + IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1); + case SVR_P5010: + case SVR_P5020: + case SVR_P5021: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_T4240: + case SVR_T4160: + case SVR_T4080: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_T1040: + return IS_SVR_REV(svr, 1, 0); + case SVR_T2080: + case SVR_T2081: + return IS_SVR_REV(svr, 1, 0); + case SVR_P5040: + return IS_SVR_REV(svr, 1, 0); + } + + return false; +} + +static inline bool has_erratum_a007075(void) +{ + u32 svr = get_svr(); + u32 soc = SVR_SOC_VER(svr); + + switch (soc) { + case SVR_B4860: + case SVR_B4420: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_P1010: + return IS_SVR_REV(svr, 1, 0); + case SVR_P4080: + return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); + } + return false; +} + +static inline bool has_erratum_a007798(void) +{ + return SVR_SOC_VER(get_svr()) == SVR_T4240 && + IS_SVR_REV(get_svr(), 2, 0); +} +#else +static inline bool has_erratum_a006261(void) +{ + return false; +} + +static inline bool has_erratum_a007075(void) +{ + return false; +} + +static inline bool has_erratum_a007798(void) +{ + return false; +} + +#endif #endif /*_ASM_FSL_USB_H_ */ diff --git a/include/image.h b/include/image.h index 07e9aed..af30d60 100644 --- a/include/image.h +++ b/include/image.h @@ -119,6 +119,12 @@ struct lmb; # define IMAGE_OF_BOARD_SETUP 0 #endif +#ifdef CONFIG_OF_SYSTEM_SETUP +# define IMAGE_OF_SYSTEM_SETUP 1 +#else +# define IMAGE_OF_SYSTEM_SETUP 0 +#endif + /* * Operating System Codes */ diff --git a/include/phy.h b/include/phy.h index b495077..d430ed0 100644 --- a/include/phy.h +++ b/include/phy.h @@ -41,6 +41,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_SGMII_2500, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, @@ -57,6 +58,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_SGMII_2500] = "sgmii-2500", [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h index c2a772a..b0e4255 100644 --- a/include/power/max77686_pmic.h +++ b/include/power/max77686_pmic.h @@ -150,6 +150,7 @@ enum { int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV); int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode); +int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV); int max77686_set_buck_mode(struct pmic *p, int buck, char opmode); #define MAX77686_LDO_VOLT_MAX_HEX 0x3f @@ -159,6 +160,8 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode); #define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06) #define MAX77686_LDO_MODE_LPM (0x02 << 0x06) #define MAX77686_LDO_MODE_ON (0x03 << 0x06) +#define MAX77686_BUCK_VOLT_MAX_HEX 0x3f +#define MAX77686_BUCK_VOLT_MASK 0x3f #define MAX77686_BUCK_MODE_MASK 0x03 #define MAX77686_BUCK_MODE_SHIFT_1 0x00 #define MAX77686_BUCK_MODE_SHIFT_2 0x04 diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index dd77ad6..897018b 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -163,6 +163,9 @@ #elif defined(CONFIG_MPC512X) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR 0 +#elif defined(CONFIG_LS102XA) +#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_LS102XA_USB1_ADDR +#define CONFIG_SYS_FSL_USB2_ADDR 0 #endif /* diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 0d1d5d5..a8872b0 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -694,20 +694,25 @@ char *fdtdec_get_config_string(const void *blob, const char *prop_name) return (char *)nodep; } -int fdtdec_decode_region(const void *blob, int node, - const char *prop_name, void **ptrp, size_t *size) +int fdtdec_decode_region(const void *blob, int node, const char *prop_name, + fdt_addr_t *basep, fdt_size_t *sizep) { const fdt_addr_t *cell; int len; - debug("%s: %s\n", __func__, prop_name); + debug("%s: %s: %s\n", __func__, fdt_get_name(blob, node, NULL), + prop_name); cell = fdt_getprop(blob, node, prop_name, &len); - if (!cell || (len != sizeof(fdt_addr_t) * 2)) + if (!cell || (len < sizeof(fdt_addr_t) * 2)) { + debug("cell=%p, len=%d\n", cell, len); return -1; + } + + *basep = fdt_addr_to_cpu(*cell); + *sizep = fdt_size_to_cpu(cell[1]); + debug("%s: base=%08lx, size=%lx\n", __func__, (ulong)*basep, + (ulong)*sizep); - *ptrp = map_sysmem(fdt_addr_to_cpu(*cell), *size); - *size = fdt_size_to_cpu(cell[1]); - debug("%s: size=%zx\n", __func__, *size); return 0; } @@ -723,6 +728,7 @@ int fdtdec_decode_region(const void *blob, int node, int fdtdec_read_fmap_entry(const void *blob, int node, const char *name, struct fmap_entry *entry) { + const char *prop; u32 reg[2]; if (fdtdec_get_int_array(blob, node, "reg", reg, 2)) { @@ -731,6 +737,13 @@ int fdtdec_read_fmap_entry(const void *blob, int node, const char *name, } entry->offset = reg[0]; entry->length = reg[1]; + entry->used = fdtdec_get_int(blob, node, "used", entry->length); + prop = fdt_getprop(blob, node, "compress", NULL); + entry->compress_algo = prop && !strcmp(prop, "lzo") ? + FMAP_COMPRESS_LZO : FMAP_COMPRESS_NONE; + prop = fdt_getprop(blob, node, "hash", &entry->hash_size); + entry->hash_algo = prop ? FMAP_HASH_SHA256 : FMAP_HASH_NONE; + entry->hash = (uint8_t *)prop; return 0; } @@ -805,4 +818,65 @@ int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf) return 0; } + +int fdtdec_decode_memory_region(const void *blob, int config_node, + const char *mem_type, const char *suffix, + fdt_addr_t *basep, fdt_size_t *sizep) +{ + char prop_name[50]; + const char *mem; + fdt_size_t size, offset_size; + fdt_addr_t base, offset; + int node; + + if (config_node == -1) { + config_node = fdt_path_offset(blob, "/config"); + if (config_node < 0) { + debug("%s: Cannot find /config node\n", __func__); + return -ENOENT; + } + } + if (!suffix) + suffix = ""; + + snprintf(prop_name, sizeof(prop_name), "%s-memory%s", mem_type, + suffix); + mem = fdt_getprop(blob, config_node, prop_name, NULL); + if (!mem) { + debug("%s: No memory type for '%s', using /memory\n", __func__, + prop_name); + mem = "/memory"; + } + + node = fdt_path_offset(blob, mem); + if (node < 0) { + debug("%s: Failed to find node '%s': %s\n", __func__, mem, + fdt_strerror(node)); + return -ENOENT; + } + + /* + * Not strictly correct - the memory may have multiple banks. We just + * use the first + */ + if (fdtdec_decode_region(blob, node, "reg", &base, &size)) { + debug("%s: Failed to decode memory region %s\n", __func__, + mem); + return -EINVAL; + } + + snprintf(prop_name, sizeof(prop_name), "%s-offset%s", mem_type, + suffix); + if (fdtdec_decode_region(blob, config_node, prop_name, &offset, + &offset_size)) { + debug("%s: Failed to decode memory region '%s'\n", __func__, + prop_name); + return -EINVAL; + } + + *basep = base + offset; + *sizep = offset_size; + + return 0; +} #endif |