diff options
390 files changed, 2787 insertions, 7605 deletions
@@ -419,8 +419,8 @@ $(obj)u-boot.kwb: $(obj)u-boot.bin -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ $(obj)u-boot.pbl: $(obj)u-boot.bin - $(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \ - -R $(CONFIG_PBLPBI_CONFIG) -T pblimage \ + $(obj)tools/mkimage -n $(CONFIG_SYS_FSL_PBL_RCW) \ + -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage \ -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin @@ -472,6 +472,21 @@ The following options need to be configured: Board config to use DDR3. It can be enabled for SoCs with Freescale DDR3 controllers. + CONFIG_SYS_FSL_IFC_BE + Defines the IFC controller register space as Big Endian + + CONFIG_SYS_FSL_IFC_LE + Defines the IFC controller register space as Little Endian + + CONFIG_SYS_FSL_PBL_PBI + It enables addition of RCW (Power on reset configuration) in built image. + Please refer doc/README.pblimage for more details + + CONFIG_SYS_FSL_PBL_RCW + It adds PBI(pre-boot instructions) commands in u-boot build image. + PBI commands can be used to configure SoC before it starts the execution. + Please refer doc/README.pblimage for more details + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO @@ -887,6 +902,7 @@ The following options need to be configured: CONFIG_CMD_BSP * Board specific commands CONFIG_CMD_BOOTD bootd CONFIG_CMD_CACHE * icache, dcache + CONFIG_CMD_CLK * clock command support CONFIG_CMD_CONSOLE coninfo CONFIG_CMD_CRC32 * crc32 CONFIG_CMD_DATE * support for RTC, date/time... diff --git a/arch/arm/config.mk b/arch/arm/config.mk index cfa4209..98c1253 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -18,7 +18,8 @@ endif LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \ -fno-common -ffixed-r9 -PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) +PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \ + $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) # Support generic board on ARM __HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index b4d396d..f74228c 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -7,13 +7,6 @@ # Make ARMv5 to allow more compilers to work, even though its v6. PLATFORM_CPPFLAGS += -march=armv5 -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) ifneq ($(CONFIG_IMX_CONFIG),) ifdef CONFIG_SPL diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/cpu/arm1176/bcm2835/timer.c index 2edd671..017907c 100644 --- a/arch/arm/cpu/arm1176/bcm2835/timer.c +++ b/arch/arm/cpu/arm1176/bcm2835/timer.c @@ -18,11 +18,6 @@ #include <asm/io.h> #include <asm/arch/timer.h> -int timer_init(void) -{ - return 0; -} - ulong get_timer_us(ulong base) { struct bcm2835_timer_regs *regs = diff --git a/arch/arm/cpu/arm1176/config.mk b/arch/arm/cpu/arm1176/config.mk index f4631cb..5dc2ebb 100644 --- a/arch/arm/cpu/arm1176/config.mk +++ b/arch/arm/cpu/arm1176/config.mk @@ -7,11 +7,3 @@ # Make ARMv5 to allow more compilers to work, even though its v6. PLATFORM_CPPFLAGS += -march=armv5t -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,\ - $(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm720t/config.mk b/arch/arm/cpu/arm720t/config.mk index 2581f0a..772fb41 100644 --- a/arch/arm/cpu/arm720t/config.mk +++ b/arch/arm/cpu/arm720t/config.mk @@ -7,11 +7,3 @@ # PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,\ - $(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm920t/config.mk b/arch/arm/cpu/arm920t/config.mk index 67537dc..799afff 100644 --- a/arch/arm/cpu/arm920t/config.mk +++ b/arch/arm/cpu/arm920t/config.mk @@ -6,10 +6,3 @@ # PLATFORM_CPPFLAGS += -march=armv4 -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 12b0d09..4d9895f 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -6,13 +6,6 @@ # PLATFORM_CPPFLAGS += -march=armv5te -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) ifneq ($(CONFIG_IMX_CONFIG),) ifdef CONFIG_SPL diff --git a/arch/arm/cpu/arm946es/config.mk b/arch/arm/cpu/arm946es/config.mk index eb81a57..438668d 100644 --- a/arch/arm/cpu/arm946es/config.mk +++ b/arch/arm/cpu/arm946es/config.mk @@ -6,10 +6,3 @@ # PLATFORM_CPPFLAGS += -march=armv4 -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm_intcm/config.mk b/arch/arm/cpu/arm_intcm/config.mk index eb81a57..438668d 100644 --- a/arch/arm/cpu/arm_intcm/config.mk +++ b/arch/arm/cpu/arm_intcm/config.mk @@ -6,10 +6,3 @@ # PLATFORM_CPPFLAGS += -march=armv4 -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index f0d9c04..38b7c40 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -10,14 +10,6 @@ PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5) PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7) -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) - # SEE README.arm-unaligned-accesses PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk index fd47c60..894861f 100644 --- a/arch/arm/cpu/ixp/config.mk +++ b/arch/arm/cpu/ixp/config.mk @@ -14,11 +14,3 @@ PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100 PLATFORM_LDFLAGS += -EB USE_PRIVATE_LIBGCC = yes - -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk index f2befbe..986b11b 100644 --- a/arch/arm/cpu/pxa/config.mk +++ b/arch/arm/cpu/pxa/config.mk @@ -7,13 +7,6 @@ # PLATFORM_CPPFLAGS += -mcpu=xscale -# ========================================================================= -# -# Supply options according to compiler version -# -# ======================================================================== -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) # # !WARNING! diff --git a/arch/arm/cpu/sa1100/config.mk b/arch/arm/cpu/sa1100/config.mk index b3026cc..3afa685 100644 --- a/arch/arm/cpu/sa1100/config.mk +++ b/arch/arm/cpu/sa1100/config.mk @@ -7,10 +7,3 @@ # PLATFORM_CPPFLAGS += -march=armv4 -mtune=strongarm1100 -# ========================================================================= -# -# Supply options according to compiler version -# -# ======================================================================== -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/sa1100/timer.c b/arch/arm/cpu/sa1100/timer.c index 4b981e4..0a0006b 100644 --- a/arch/arm/cpu/sa1100/timer.c +++ b/arch/arm/cpu/sa1100/timer.c @@ -13,11 +13,6 @@ #include <common.h> #include <SA-1100.h> -int timer_init (void) -{ - return 0; -} - ulong get_timer (ulong base) { return get_timer_masked (); diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 5cd1e95..2df4114 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -19,6 +19,7 @@ #define BOOT_DEVICE_MMC1 7 #define BOOT_DEVICE_MMC2 8 #define BOOT_DEVICE_SPI 10 +#define BOOT_DEVICE_USB 13 #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_CPGMAC 71 #else @@ -38,9 +39,16 @@ #endif #define BOOT_DEVICE_MMC2_2 0xFF -#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#if defined(CONFIG_AM33XX) +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#elif defined(CONFIG_AM43XX) +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#ifdef CONFIG_SPL_USB_SUPPORT +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB +#else +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#endif #elif defined(CONFIG_TI81XX) #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 diff --git a/arch/avr32/config.mk b/arch/avr32/config.mk index 4ab4745..b9b9631 100644 --- a/arch/avr32/config.mk +++ b/arch/avr32/config.mk @@ -6,7 +6,7 @@ # CROSS_COMPILE ?= avr32-linux- - +PLATFORM_CPPFLAGS += -DCONFIG_AVR32 CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax diff --git a/arch/avr32/cpu/pio2.h b/arch/avr32/cpu/pio2.h deleted file mode 100644 index 9719ea8..0000000 --- a/arch/avr32/cpu/pio2.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Register definitions for Parallel Input/Output Controller - */ -#ifndef __CPU_AT32AP_PIO2_H__ -#define __CPU_AT32AP_PIO2_H__ - -/* PIO2 register offsets */ -#define PIO2_PER 0x0000 -#define PIO2_PDR 0x0004 -#define PIO2_PSR 0x0008 -#define PIO2_OER 0x0010 -#define PIO2_ODR 0x0014 -#define PIO2_OSR 0x0018 -#define PIO2_IFER 0x0020 -#define PIO2_IFDR 0x0024 -#define PIO2_ISFR 0x0028 -#define PIO2_SODR 0x0030 -#define PIO2_CODR 0x0034 -#define PIO2_ODSR 0x0038 -#define PIO2_PDSR 0x003c -#define PIO2_IER 0x0040 -#define PIO2_IDR 0x0044 -#define PIO2_IMR 0x0048 -#define PIO2_ISR 0x004c -#define PIO2_MDER 0x0050 -#define PIO2_MDDR 0x0054 -#define PIO2_MDSR 0x0058 -#define PIO2_PUDR 0x0060 -#define PIO2_PUER 0x0064 -#define PIO2_PUSR 0x0068 -#define PIO2_ASR 0x0070 -#define PIO2_BSR 0x0074 -#define PIO2_ABSR 0x0078 -#define PIO2_OWER 0x00a0 -#define PIO2_OWDR 0x00a4 -#define PIO2_OWSR 0x00a8 - -/* Register access macros */ -#define pio2_readl(base,reg) \ - readl((void *)base + PIO2_##reg) -#define pio2_writel(base,reg,value) \ - writel((value), (void *)base + PIO2_##reg) - -#endif /* __CPU_AT32AP_PIO2_H__ */ diff --git a/arch/avr32/include/asm/arch-at32ap700x/gpio-impl.h b/arch/avr32/include/asm/arch-at32ap700x/gpio-impl.h deleted file mode 100644 index 8801bd0..0000000 --- a/arch/avr32/include/asm/arch-at32ap700x/gpio-impl.h +++ /dev/null @@ -1,86 +0,0 @@ -#ifndef __ASM_AVR32_ARCH_GPIO_IMPL_H__ -#define __ASM_AVR32_ARCH_GPIO_IMPL_H__ - -/* Register offsets */ -struct gpio_regs { - u32 GPER; - u32 GPERS; - u32 GPERC; - u32 GPERT; - u32 PMR0; - u32 PMR0S; - u32 PMR0C; - u32 PMR0T; - u32 PMR1; - u32 PMR1S; - u32 PMR1C; - u32 PMR1T; - u32 __reserved0[4]; - u32 ODER; - u32 ODERS; - u32 ODERC; - u32 ODERT; - u32 OVR; - u32 OVRS; - u32 OVRC; - u32 OVRT; - u32 PVR; - u32 __reserved_PVRS; - u32 __reserved_PVRC; - u32 __reserved_PVRT; - u32 PUER; - u32 PUERS; - u32 PUERC; - u32 PUERT; - u32 PDER; - u32 PDERS; - u32 PDERC; - u32 PDERT; - u32 IER; - u32 IERS; - u32 IERC; - u32 IERT; - u32 IMR0; - u32 IMR0S; - u32 IMR0C; - u32 IMR0T; - u32 IMR1; - u32 IMR1S; - u32 IMR1C; - u32 IMR1T; - u32 GFER; - u32 GFERS; - u32 GFERC; - u32 GFERT; - u32 IFR; - u32 __reserved_IFRS; - u32 IFRC; - u32 __reserved_IFRT; - u32 ODMER; - u32 ODMERS; - u32 ODMERC; - u32 ODMERT; - u32 __reserved1[4]; - u32 ODCR0; - u32 ODCR0S; - u32 ODCR0C; - u32 ODCR0T; - u32 ODCR1; - u32 ODCR1S; - u32 ODCR1C; - u32 ODCR1T; - u32 __reserved2[4]; - u32 OSRR0; - u32 OSRR0S; - u32 OSRR0C; - u32 OSRR0T; - u32 __reserved3[8]; - u32 STER; - u32 STERS; - u32 STERC; - u32 STERT; - u32 __reserved4[35]; - u32 VERSION; -}; - -#endif /* __ASM_AVR32_ARCH_GPIO_IMPL_H__ */ diff --git a/arch/avr32/include/asm/arch-common/portmux-gpio.h b/arch/avr32/include/asm/arch-common/portmux-gpio.h deleted file mode 100644 index fb01a17..0000000 --- a/arch/avr32/include/asm/arch-common/portmux-gpio.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Copyright (C) 2008 Atmel Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __AVR32_PORTMUX_GPIO_H__ -#define __AVR32_PORTMUX_GPIO_H__ - -#include <asm/io.h> - -/* Register layout for this specific device */ -#include <asm/arch/gpio-impl.h> - -/* Register access macros */ -#define gpio_readl(port, reg) \ - __raw_readl(&((struct gpio_regs *)port)->reg) -#define gpio_writel(gpio, reg, value) \ - __raw_writel(value, &((struct gpio_regs *)port)->reg) - -/* Portmux API starts here. See doc/README.AVR32-port-muxing */ - -enum portmux_function { - PORTMUX_FUNC_A, - PORTMUX_FUNC_B, - PORTMUX_FUNC_C, - PORTMUX_FUNC_D, -}; - -#define PORTMUX_DIR_INPUT (0 << 0) -#define PORTMUX_DIR_OUTPUT (1 << 0) -#define PORTMUX_INIT_LOW (0 << 1) -#define PORTMUX_INIT_HIGH (1 << 1) -#define PORTMUX_PULL_UP (1 << 2) -#define PORTMUX_PULL_DOWN (2 << 2) -#define PORTMUX_BUSKEEPER (3 << 2) -#define PORTMUX_DRIVE_MIN (0 << 4) -#define PORTMUX_DRIVE_LOW (1 << 4) -#define PORTMUX_DRIVE_HIGH (2 << 4) -#define PORTMUX_DRIVE_MAX (3 << 4) -#define PORTMUX_OPEN_DRAIN (1 << 6) - -void portmux_select_peripheral(void *port, unsigned long pin_mask, - enum portmux_function func, unsigned long flags); -void portmux_select_gpio(void *port, unsigned long pin_mask, - unsigned long flags); - -/* Internal helper functions */ - -static inline void *gpio_pin_to_port(unsigned int pin) -{ - return (void *)GPIO_BASE + (pin >> 5) * 0x200; -} - -static inline void __gpio_set_output_value(void *port, unsigned int pin, - int value) -{ - if (value) - gpio_writel(port, OVRS, 1 << pin); - else - gpio_writel(port, OVRC, 1 << pin); -} - -static inline int __gpio_get_input_value(void *port, unsigned int pin) -{ - return (gpio_readl(port, PVR) >> pin) & 1; -} - -void gpio_set_output_value(unsigned int pin, int value); -int gpio_get_input_value(unsigned int pin); - -/* GPIO API starts here */ - -/* - * GCC doesn't realize that the constant case is extremely trivial, - * so we need to help it make the right decision by using - * always_inline. - */ -__attribute__((always_inline)) -static inline void gpio_set_value(unsigned int pin, int value) -{ - if (__builtin_constant_p(pin)) - __gpio_set_output_value(gpio_pin_to_port(pin), - pin & 0x1f, value); - else - gpio_set_output_value(pin, value); -} - -__attribute__((always_inline)) -static inline int gpio_get_value(unsigned int pin) -{ - if (__builtin_constant_p(pin)) - return __gpio_get_input_value(gpio_pin_to_port(pin), - pin & 0x1f); - else - return gpio_get_input_value(pin); -} - -#endif /* __AVR32_PORTMUX_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/mach-common/bits/lockbox.h b/arch/blackfin/include/asm/mach-common/bits/lockbox.h deleted file mode 100644 index 17d22ab..0000000 --- a/arch/blackfin/include/asm/mach-common/bits/lockbox.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Lockbox/Security Masks - */ - -#ifndef __BFIN_PERIPHERAL_LOCKBOX__ -#define __BFIN_PERIPHERAL_LOCKBOX__ - -#ifndef __ASSEMBLY__ - -#include "bootrom.h" - -/* SESR argument structure. Expected to reside at 0xFF900018. */ -typedef struct SESR_args { - unsigned short usFlags; /* security firmware flags */ - unsigned short usIRQMask; /* interrupt mask */ - unsigned long ulMessageSize; /* message length in bytes */ - unsigned long ulSFEntryPoint; /* entry point of secure function */ - unsigned long ulMessagePtr; /* pointer to the buffer containing - the digital signature and message */ - unsigned long ulReserved1; /* reserved */ - unsigned long ulReserved2; /* reserved */ -} tSESR_args; - -/* Secure Entry Service Routine */ -static void (* const sesr)(void) = (void *)_BOOTROM_SESR; - -#endif - -/* SESR flags argument bitfields */ -#define SESR_FLAGS_STAY_AT_NMI 0x0000 -#define SESR_FLAGS_DROP_BELOW_NMI 0x0001 -#define SESR_FLAGS_NO_SF_DMA 0x0000 -#define SESR_FLAGS_DMA_SF_TO_RUN_DEST 0x0002 -#define SESR_FLAGS_USE_ADI_PUB_KEY 0x0000 -#define SESR_FLAGS_USE_CUST_PUB_KEY 0x0100 - -/* Bit masks for SECURE_SYSSWT */ -#define EMUDABL 0x00000001 /* Emulation Disable */ -#define RSTDABL 0x00000002 /* Reset Disable */ -#define L1IDABL 0x0000001c /* L1 Instruction Memory Disable */ -#define L1DADABL 0x000000e0 /* L1 Data Bank A Memory Disable */ -#define L1DBDABL 0x00000700 /* L1 Data Bank B Memory Disable */ -#define DMA0OVR 0x00000800 /* DMA0 Memory Access Override */ -#define DMA1OVR 0x00001000 /* DMA1 Memory Access Override */ -#define EMUOVR 0x00004000 /* Emulation Override */ -#define OTPSEN 0x00008000 /* OTP Secrets Enable */ -#define L2DABL 0x00070000 /* L2 Memory Disable */ - -/* Bit masks for SECURE_CONTROL */ -#define SECURE0 0x0001 /* SECURE 0 */ -#define SECURE1 0x0002 /* SECURE 1 */ -#define SECURE2 0x0004 /* SECURE 2 */ -#define SECURE3 0x0008 /* SECURE 3 */ - -/* Bit masks for SECURE_STATUS */ -#define SECMODE 0x0003 /* Secured Mode Control State */ -#define NMI 0x0004 /* Non Maskable Interrupt */ -#define AFVALID 0x0008 /* Authentication Firmware Valid */ -#define AFEXIT 0x0010 /* Authentication Firmware Exit */ -#define SECSTAT 0x00e0 /* Secure Status */ - -#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/sport.h b/arch/blackfin/include/asm/mach-common/bits/sport.h deleted file mode 100644 index 88e7a5d..0000000 --- a/arch/blackfin/include/asm/mach-common/bits/sport.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * SPORT Masks - */ - -#ifndef __BFIN_PERIPHERAL_SPORT__ -#define __BFIN_PERIPHERAL_SPORT__ - -/* SPORTx_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define DTYPE_NORM 0x0004 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ - -/* SPORTx_TCR2 Masks */ -#define SLEN 0x001F /* TX Word Length */ -#define TXSE 0x0100 /* TX Secondary Enable */ -#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /* TX Right-First Data Order */ - -/* SPORTx_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -#define DTYPE_NORM 0x0004 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ - -/* SPORTx_RCR2 Masks */ -#define SLEN 0x001F /* RX Word Length */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ - -/* SPORTx_STAT Masks */ -#define RXNE 0x0001 /* RX FIFO Not Empty Status */ -#define RUVF 0x0002 /* RX Underflow Status */ -#define ROVF 0x0004 /* RX Overflow Status */ -#define TXF 0x0008 /* TX FIFO Full Status */ -#define TUVF 0x0010 /* TX Underflow Status */ -#define TOVF 0x0020 /* TX Overflow Status */ -#define TXHRE 0x0040 /* TX Hold Register Empty */ - -/* SPORTx_MCMC1 Masks */ -#define WSIZE 0xF000 /* Multichannel Window Size Field */ -#define WOFF 0x03FF /* Multichannel Window Offset Field */ - -/* SPORTx_MCMC2 Masks */ -#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ -#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ -#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ -#define MFD 0xF000 /* Multichannel Frame Delay */ -#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ -#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ -#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ -#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ -#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ -#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ -#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ -#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ -#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ -#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ -#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ -#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ -#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ -#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ -#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ -#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ - -#endif diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile index 6e201f2..4955e81 100644 --- a/arch/microblaze/cpu/Makefile +++ b/arch/microblaze/cpu/Makefile @@ -8,3 +8,4 @@ extra-y = start.o obj-y = irq.o obj-y += cpu.o interrupts.o cache.o exception.o timer.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c index 9218355..227842f 100644 --- a/arch/microblaze/cpu/exception.c +++ b/arch/microblaze/cpu/exception.c @@ -35,6 +35,9 @@ void _hw_exception_handler (void) puts ("Divide by zero exception\n"); break; #ifdef MICROBLAZE_V5 + case 0x7: + puts("Priviledged or stack protection violation exception\n"); + break; case 0x1000: puts ("Exception in delay slot\n"); break; diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c new file mode 100644 index 0000000..0912261 --- /dev/null +++ b/arch/microblaze/cpu/spl.c @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2013 - 2014 Xilinx, Inc + * + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <image.h> +#include <spl.h> +#include <version.h> +#include <asm/io.h> +#include <asm/u-boot.h> + +DECLARE_GLOBAL_DATA_PTR; + +bool boot_linux; + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_NOR; +} + +/* Board initialization after bss clearance */ +void spl_board_init(void) +{ + gd = (gd_t *)CONFIG_SPL_STACK_ADDR; + + /* enable console uart printing */ + preloader_console_init(); +} + +#ifdef CONFIG_SPL_OS_BOOT +void __noreturn jump_to_image_linux(void *arg) +{ + debug("Entering kernel arg pointer: 0x%p\n", arg); + typedef void (*image_entry_arg_t)(char *, ulong, ulong) + __attribute__ ((noreturn)); + image_entry_arg_t image_entry = + (image_entry_arg_t)spl_image.entry_point; + + image_entry(NULL, 0, (ulong)arg); +} +#endif /* CONFIG_SPL_OS_BOOT */ + +int spl_start_uboot(void) +{ +#ifdef CONFIG_SPL_OS_BOOT + if (boot_linux) + return 0; +#endif + + return 1; +} diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 8928024..1757bbf 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -22,6 +22,11 @@ _start: */ mts rmsr, r0 /* disable cache */ + +#if defined(CONFIG_SPL_BUILD) + addi r1, r0, CONFIG_SPL_STACK_ADDR + addi r1, r1, -4 /* Decrement SP to top of memory */ +#else addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET addi r1, r1, -4 /* Decrement SP to top of memory */ @@ -115,6 +120,7 @@ _start: sh r7, r0, r8 rsubi r8, r10, 0x26 sh r6, r0, r8 +#endif /* BUILD_SPL */ /* Flush cache before enable cache */ addik r5, r0, 0 @@ -139,9 +145,14 @@ clear_bss: cmp r6, r5, r4 /* check if we have reach the end */ bnei r6, 2b 3: /* jumping to board_init */ +#ifndef CONFIG_SPL_BUILD brai board_init_f +#else + brai board_init_r +#endif 1: bri 1b +#ifndef CONFIG_SPL_BUILD /* * Read 16bit little endian */ @@ -174,3 +185,4 @@ out16: bslli r3, r6, 8 rtsd r15, 8 or r0, r0, r0 .end out16 +#endif diff --git a/arch/microblaze/cpu/timer.c b/arch/microblaze/cpu/timer.c index 69ae6d4..3960bbb 100644 --- a/arch/microblaze/cpu/timer.c +++ b/arch/microblaze/cpu/timer.c @@ -34,6 +34,7 @@ void __udelay(unsigned long usec) } } +#ifndef CONFIG_SPL_BUILD static void timer_isr(void *arg) { timestamp++; @@ -62,10 +63,15 @@ int timer_init (void) if (ret) tmr = NULL; } - /* No problem if timer is not found/initialized */ return 0; } +#else +int timer_init(void) +{ + return 0; +} +#endif /* * This function is derived from PowerPC code (read timebase as long long). diff --git a/arch/microblaze/cpu/u-boot-spl.lds b/arch/microblaze/cpu/u-boot-spl.lds new file mode 100644 index 0000000..96353cd --- /dev/null +++ b/arch/microblaze/cpu/u-boot-spl.lds @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2013 - 2014 Xilinx, Inc + * + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> + +OUTPUT_ARCH(microblaze) +ENTRY(_start) + +SECTIONS +{ + .text ALIGN(0x4): + { + __text_start = .; + arch/microblaze/cpu/start.o (.text) + *(.text) + *(.text.*) + __text_end = .; + } + + .rodata ALIGN(0x4): + { + __rodata_start = .; + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + __rodata_end = .; + } + + .data ALIGN(0x4): + { + __data_start = .; + *(.data) + *(.data.*) + __data_end = .; + } + + .bss ALIGN(0x4): + { + __bss_start = .; + *(.sbss) + *(.scommon) + *(.bss) + *(.bss.*) + *(COMMON) + . = ALIGN(4); + __bss_end = .; + } + __end = . ; +} + +#if defined(CONFIG_SPL_MAX_FOOTPRINT) +ASSERT(__end - _start < (CONFIG_SPL_MAX_FOOTPRINT), \ + "SPL image plus BSS too big"); +#endif diff --git a/arch/microblaze/include/asm/spl.h b/arch/microblaze/include/asm/spl.h new file mode 100644 index 0000000..c1cae6c --- /dev/null +++ b/arch/microblaze/include/asm/spl.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2013 - 2014 Xilinx, Inc + * + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_MICROBLAZE_SPL_H_ +#define _ASM_MICROBLAZE_SPL_H_ + +#define BOOT_DEVICE_RAM 1 +#define BOOT_DEVICE_NOR 2 +#define BOOT_DEVICE_SPI 3 + +#endif diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h index 31b014c..ab3f232 100644 --- a/arch/microblaze/include/asm/u-boot.h +++ b/arch/microblaze/include/asm/u-boot.h @@ -25,6 +25,7 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned int bi_baudrate; /* Console Baudrate */ + ulong bi_boot_params; /* where this board expects params */ } bd_t; /* For image.h:image_check_target_arch() */ diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 896e73a..59956a8 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -24,6 +24,12 @@ DECLARE_GLOBAL_DATA_PTR; +static int display_banner(void) +{ + printf("\n\n%s\n\n", version_string); + return 0; +} + /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -44,9 +50,14 @@ init_fnc_t *init_sequence[] = { fdtdec_check_fdt, #endif serial_init, +#ifndef CONFIG_SPL_BUILD console_init_f, +#endif + display_banner, +#ifndef CONFIG_SPL_BUILD interrupts_init, timer_init, +#endif NULL, }; @@ -59,7 +70,7 @@ void board_init_f(ulong not_used) gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET); bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - GENERATED_BD_INFO_SIZE); -#if defined(CONFIG_CMD_FLASH) +#if defined(CONFIG_CMD_FLASH) && !defined(CONFIG_SPL_BUILD) ulong flash_size = 0; #endif asm ("nop"); /* FIXME gd is not initialize - wait */ @@ -81,9 +92,12 @@ void board_init_f(ulong not_used) /* FDT is at end of image */ gd->fdt_blob = (void *)__end; #endif + +#ifndef CONFIG_SPL_BUILD /* Allow the early environment to override the fdt address */ gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, (uintptr_t)gd->fdt_blob); +#endif /* * The Malloc area is immediately below the monitor copy in DRAM @@ -103,6 +117,7 @@ void board_init_f(ulong not_used) hang(); } +#ifndef CONFIG_SPL_BUILD #ifdef CONFIG_OF_CONTROL /* For now, put this check after the console is ready */ if (fdtdec_prepare_fdt()) @@ -183,4 +198,5 @@ void board_init_f(ulong not_used) WATCHDOG_RESET(); main_loop(); } +#endif /* CONFIG_SPL_BUILD */ } diff --git a/arch/nds32/cpu/n1213/ag101/asm-offsets.c b/arch/nds32/cpu/n1213/ag101/asm-offsets.c index 92ada8a..cfe52d1 100644 --- a/arch/nds32/cpu/n1213/ag101/asm-offsets.c +++ b/arch/nds32/cpu/n1213/ag101/asm-offsets.c @@ -21,6 +21,7 @@ int main(void) #endif BLANK(); #ifdef CONFIG_FTAHBC020S + OFFSET(FTAHBC020S_SLAVE_BSR_4, ftahbc02s, s_bsr[4]); OFFSET(FTAHBC020S_SLAVE_BSR_6, ftahbc02s, s_bsr[6]); OFFSET(FTAHBC020S_CR, ftahbc02s, cr); #endif diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S index 810326d..d6484b9 100644 --- a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S +++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S @@ -32,6 +32,15 @@ #define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR #define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR + +/* + * for Orca and Emerald + */ +#define BOARD_ID_REG 0x104 +#define BOARD_ID_FAMILY_MASK 0xfff000 +#define BOARD_ID_FAMILY_V5 0x556000 +#define BOARD_ID_FAMILY_K7 0x74b000 + /* * parameters for the static memory controller */ @@ -47,6 +56,10 @@ #define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR) #define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6) +/* + * for Orca and Emerald + */ +#define AHBC_BSR4_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_4) #define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 /* @@ -100,14 +113,49 @@ mem_init: * we need to set onboard SDRAM before remap and relocation. */ led 0x01 - write32 SMC_BANK0_CR_A, SMC_BANK0_CR_D ! 0x10000052 - write32 SMC_BANK0_TPR_A, SMC_BANK0_TPR_D ! 0x00151151 + + /* + * for Orca and Emerald + * disable write protection and reset bank size + */ + li $r0, SMC_BANK0_CR_A + lwi $r1, [$r0+#0x00] + ori $r1, $r1, 0x8f0 + xori $r1, $r1, 0x8f0 + /* + * check board + */ + li $r3, CONFIG_FTPMU010_BASE + BOARD_ID_REG + lwi $r3, [$r3] + li $r4, BOARD_ID_FAMILY_MASK + and $r3, $r3, $r4 + li $r4, BOARD_ID_FAMILY_K7 + xor $r4, $r3, $r4 + beqz $r4, use_flash_16bit_boot + /* + * 32-bit mode + */ +use_flash_32bit_boot: + ori $r1, $r1, 0x50 + li $r2, 0x00151151 + j sdram_b0_cr + /* + * 16-bit mode + */ +use_flash_16bit_boot: + ori $r1, $r1, 0x60 + li $r2, 0x00153153 + /* + * SRAM bank0 config + */ +sdram_b0_cr: + swi $r1, [$r0+#0x00] + swi $r2, [$r0+#0x04] /* * config AHB Controller */ led 0x02 - write32 AHBC_BSR6_A, AHBC_BSR6_D /* * config PMU controller @@ -194,7 +242,16 @@ relo_base: * a FLASH connected to bank0. */ led 0x11 - li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */ + /* + * for Orca and Emerald + * read sdram base address automatically + */ + li $r5, AHBC_BSR6_A + lwi $r8, [$r5] + li $r4, 0xfff00000 + and $r4, $r4, $r8 + + li $r5, 0x0 la $r1, relo_base /* get $pc or $lp */ sub $r2, $r0, $r1 @@ -218,6 +275,29 @@ relo_base: write32 SDMC_B1_BSR_A, 0x00001040 setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1 + /* + * for Orca and Emerald + * extend sdram size from 256MB to 2GB + */ + li $r5, AHBC_BSR6_A + lwi $r6, [$r5] + li $r4, 0xfff0ffff + and $r6 ,$r4 , $r6 + li $r4, 0x000b0000 + or $r6, $r4, $r6 + swi $r6, [$r5] + + /* + * for Orca and Emerald + * extend rom base from 256MB to 2GB + */ + li $r4, AHBC_BSR4_A + lwi $r5, [$r4] + li $r6, 0xffffff + and $r5, $r5, $r6 + li $r6, 0x80000000 + or $r5, $r5, $r6 + swi $r5, [$r4] #endif /* #ifdef CONFIG_MEM_REMAP */ move $lp, $r11 2: diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S index 92f956d..6b196de 100644 --- a/arch/powerpc/cpu/mpc5xx/start.S +++ b/arch/powerpc/cpu/mpc5xx/start.S @@ -19,9 +19,6 @@ #include <mpc5xx.h> #include <version.h> -#define CONFIG_5xx 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S index 517b580..02c706e 100644 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ b/arch/powerpc/cpu/mpc5xxx/start.S @@ -14,9 +14,6 @@ #include <mpc5xxx.h> #include <version.h> -#define CONFIG_MPC5xxx 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc824x/drivers/i2c_export.h b/arch/powerpc/cpu/mpc824x/drivers/i2c_export.h deleted file mode 100644 index 6264d18..0000000 --- a/arch/powerpc/cpu/mpc824x/drivers/i2c_export.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef I2C_EXPORT_H -#define I2C_EXPORT_H - -/**************************************************** - * - * Copyright Motrola 1999 - * - ****************************************************/ - -/* These are the defined return values for the I2C_do_transaction function. - * Any non-zero value indicates failure. Failure modes can be added for - * more detailed error reporting. - */ -typedef enum _i2c_status -{ - I2C_SUCCESS = 0, - I2C_ERROR, -} I2C_Status; - -/* These are the defined tasks for I2C_do_transaction. - * Modes for SLAVE_RCV and SLAVE_XMIT will be added. - */ -typedef enum _i2c_transaction_mode -{ - I2C_MASTER_RCV = 0, - I2C_MASTER_XMIT = 1, -} I2C_TRANSACTION_MODE; - -typedef enum _i2c_interrupt_mode -{ - I2C_INT_DISABLE = 0, - I2C_INT_ENABLE = 1, -} I2C_INTERRUPT_MODE; - -typedef enum _i2c_stop -{ - I2C_NO_STOP = 0, - I2C_STOP = 1, -} I2C_STOP_MODE; - -typedef enum _i2c_restart -{ - I2C_NO_RESTART = 0, - I2C_RESTART = 1, -} I2C_RESTART_MODE; - -/******************** App. API ******************** - * The application API is for user level application - * to use the functionality provided by I2C driver. - * This is a "generic" I2C interface, it should contain - * nothing specific to the Kahlua implementation. - * Only the generic functions are exported by the library. - * - * Note: Its App.s responsibility to swap the data - * byte. In our API, we just transfer whatever - * we are given - **************************************************/ - - -/* Initialize I2C unit with the following: - * driver's slave address - * interrupt enabled - * optional pointer to application layer print function - * - * These parameters may be added: - * desired clock rate - * digital filter frequency sampling rate - * - * This function must be called before I2C unit can be used. - */ -extern I2C_Status I2C_Initialize( - unsigned char addr, /* driver's I2C slave address */ - I2C_INTERRUPT_MODE en_int, /* 1 - enable I2C interrupt - * 0 - disable I2C interrupt - */ - int (*app_print_function)(char *,...)); /* pointer to optional "printf" - * provided by application - */ - -/* Perform the given I2C transaction, only MASTER_XMIT and MASTER_RCV - * are implemented. Both are only in polling mode. - * - * en_int controls interrupt/polling mode - * act is the type of transaction - * addr is the I2C address of the slave device - * len is the length of data to send or receive - * buffer is the address of the data buffer - * stop = I2C_NO_STOP, don't signal STOP at end of transaction - * I2C_STOP, signal STOP at end of transaction - * retry is the timeout retry value, currently ignored - * rsta = I2C_NO_RESTART, this is not continuation of existing transaction - * I2C_RESTART, this is a continuation of existing transaction - */ -extern I2C_Status I2C_do_transaction( I2C_INTERRUPT_MODE en_int, - I2C_TRANSACTION_MODE act, - unsigned char i2c_addr, - unsigned char data_addr, - int len, - char *buffer, - I2C_STOP_MODE stop, - int retry, - I2C_RESTART_MODE rsta); -#endif diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S index 6f397a4..b1fb062 100644 --- a/arch/powerpc/cpu/mpc824x/start.S +++ b/arch/powerpc/cpu/mpc824x/start.S @@ -26,8 +26,6 @@ #include <mpc824x.h> #include <version.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc8260/kgdb.S b/arch/powerpc/cpu/mpc8260/kgdb.S index 5a298f9..dd04d6b 100644 --- a/arch/powerpc/cpu/mpc8260/kgdb.S +++ b/arch/powerpc/cpu/mpc8260/kgdb.S @@ -10,7 +10,6 @@ #include <version.h> #define CONFIG_8260 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc8260/speed.h b/arch/powerpc/cpu/mpc8260/speed.h deleted file mode 100644 index f1b10bf..0000000 --- a/arch/powerpc/cpu/mpc8260/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index 1269291..65510fa 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -15,7 +15,6 @@ #include <version.h> #define CONFIG_8260 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index b4fafe6..36724e5 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -20,7 +20,6 @@ #include <version.h> #define CONFIG_83XX 1 /* needed for Linux kernel header files*/ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -120,6 +119,11 @@ disable_addr_trans: mtspr SRR1, r3 rfi + .globl get_svr +get_svr: + mfspr r3, SVR + blr + .globl get_pvr get_pvr: mfspr r3, PVR diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 1e5a43f..7693899 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -156,7 +156,7 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) puts("Work-around for Erratum CPU-A003999 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_DDR_A003474) - puts("Work-around for Erratum DDR-A003473 enabled\n"); + puts("Work-around for Erratum DDR-A003474 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN) puts("Work-around for DDR MSYNC_IN Erratum enabled\n"); diff --git a/arch/powerpc/cpu/mpc85xx/config.mk b/arch/powerpc/cpu/mpc85xx/config.mk index 72c964c..1470f95 100644 --- a/arch/powerpc/cpu/mpc85xx/config.mk +++ b/arch/powerpc/cpu/mpc85xx/config.mk @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -Wa,-me500 -msoft-float -mno-string +PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx -Wa,-me500 -msoft-float -mno-string # -mspe=yes is needed to have -mno-spe accepted by a buggy GCC; # see "[PATCH,rs6000] make -mno-spe work as expected" on diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 25db899..70e09ea 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -75,6 +75,8 @@ static const char *serdes_prtcl_str[] = { [XFI_FM2_MAC9] = "XFI_FM2_MAC9", [XFI_FM2_MAC10] = "XFI_FM2_MAC10", [INTERLAKEN] = "INTERLAKEN", + [QSGMII_SW1_A] = "QSGMII_SW1_A", + [QSGMII_SW1_B] = "QSGMII_SW1_B", }; #endif diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index c15e83b..fcfba7e 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -10,8 +10,6 @@ #include <mpc85xx.h> #include <version.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index db84d10..dbbd8e5 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -17,8 +17,6 @@ #include <mpc85xx.h> #include <version.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c index 32075ce..68160a9 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c @@ -21,21 +21,6 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { SET_QP_INFO(8, 34, 1, 3), SET_QP_INFO(9, 35, 1, 0), SET_QP_INFO(10, 36, 1, 0), - SET_QP_INFO(11, 37, 1, 1), - SET_QP_INFO(12, 38, 1, 1), - SET_QP_INFO(13, 39, 1, 2), - SET_QP_INFO(14, 40, 1, 2), - SET_QP_INFO(15, 41, 1, 3), - SET_QP_INFO(16, 42, 1, 3), - SET_QP_INFO(17, 43, 1, 0), - SET_QP_INFO(18, 44, 1, 0), - SET_QP_INFO(19, 45, 1, 1), - SET_QP_INFO(20, 46, 1, 1), - SET_QP_INFO(21, 47, 1, 2), - SET_QP_INFO(22, 48, 1, 2), - SET_QP_INFO(23, 49, 1, 3), - SET_QP_INFO(24, 50, 1, 3), - SET_QP_INFO(25, 51, 1, 0), }; #endif @@ -60,11 +45,6 @@ struct liodn_id_table liodn_tbl[] = { SET_DMA_LIODN(1, 147), SET_DMA_LIODN(2, 227), - SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), - SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), - SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), - SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), - /* SET_NEXUS_LIODN(557), -- not yet implemented */ }; int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); @@ -77,8 +57,6 @@ struct liodn_id_table fman1_liodn_tbl[] = { SET_FMAN_RX_1G_LIODN(1, 3, 91), SET_FMAN_RX_1G_LIODN(1, 4, 92), SET_FMAN_RX_1G_LIODN(1, 5, 93), - SET_FMAN_RX_10G_LIODN(1, 0, 94), - SET_FMAN_RX_10G_LIODN(1, 1, 95), }; int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); #endif @@ -97,23 +75,9 @@ struct liodn_id_table sec_liodn_tbl[] = { }; int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); -#ifdef CONFIG_SYS_DPAA_RMAN -struct liodn_id_table rman_liodn_tbl[] = { - /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), -}; -int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); -#endif - struct liodn_id_table liodn_bases[] = { [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), #ifdef CONFIG_SYS_DPAA_FMAN [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), #endif -#ifdef CONFIG_SYS_DPAA_RMAN - [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), -#endif }; diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c index 94814ac..d86bb27 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c @@ -8,68 +8,59 @@ #include <asm/fsl_serdes.h> #include <asm/processor.h> #include <asm/io.h> -#include "fsl_corenet2_serdes.h" -static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = { - { /* SerDes 1 */ - [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, - PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, PCIE4, SATA1}, + [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, SATA2, SATA1}, + [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE2, PCIE2, PCIE2}, [0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, PCIE2, PCIE3, PCIE4, SATA1}, [0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, - PCIE2, PCIE2, PCIE2, PCIE2}, - [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, - PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5}, - [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, - PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1}, + [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, [0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE3, PCIE4, SATA1}, + [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, [0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE2, PCIE2, PCIE2}, - [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE3, PCIE4, SATA1}, - [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE3, SATA2, SATA1}, + [0x89] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A, + PCIE2, PCIE3, QSGMII_SW1_B, SATA1}, + [0x8D] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A, + PCIE2, QSGMII_SW1_B, QSGMII_SW1_B, QSGMII_SW1_B}, [0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, [0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE2, PCIE2, PCIE2}, - }, - { - }, - { - }, - { - }, + [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, + [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, }; - enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) { - return serdes_cfg_tbl[serdes][cfg][lane]; + return serdes_cfg_tbl[cfg][lane]; } int is_serdes_prtcl_valid(int serdes, u32 prtcl) { int i; - if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl[serdes])) + if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; for (i = 0; i < SRDS_MAX_LANES; i++) { - if (serdes_cfg_tbl[serdes][prtcl][i] != NONE) + if (serdes_cfg_tbl[prtcl][i] != NONE) return 1; } diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index bc13267..acaa093 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -57,7 +57,14 @@ SECTIONS . = ALIGN(8); __init_begin = .; __init_end = .; -/* FIXME for non-NAND SPL */ + +/* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */ +#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC + .bootpg ADDR(.text) - 0x1000 : + { + KEEP(*(.bootpg)) + } :text = 0xffff +#else #if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */ .bootpg ADDR(.text) + 0x1000 : { @@ -69,12 +76,6 @@ SECTIONS #else #error unknown NAND controller #endif -#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC - .bootpg ADDR(.text) - 0x1000 : - { - KEEP(*(.bootpg)) - } :text = 0xffff -#else .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : { KEEP(*(.resetvec)) } = 0xffff diff --git a/arch/powerpc/cpu/mpc86xx/config.mk b/arch/powerpc/cpu/mpc86xx/config.mk index 69a0b96..4c7235f 100644 --- a/arch/powerpc/cpu/mpc86xx/config.mk +++ b/arch/powerpc/cpu/mpc86xx/config.mk @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -mstring -maltivec -mabi=altivec -msoft-float +PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx -mstring -maltivec -mabi=altivec -msoft-float diff --git a/arch/powerpc/cpu/mpc8xx/kgdb.S b/arch/powerpc/cpu/mpc8xx/kgdb.S index ea27d59..e774d1e 100644 --- a/arch/powerpc/cpu/mpc8xx/kgdb.S +++ b/arch/powerpc/cpu/mpc8xx/kgdb.S @@ -9,9 +9,6 @@ #include <mpc8xx.h> #include <version.h> -#define CONFIG_8xx 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index 9869bbd..f8aa93d 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -26,9 +26,6 @@ #include <mpc8xx.h> #include <version.h> -#define CONFIG_8xx 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/ppc4xx/dcr.S b/arch/powerpc/cpu/ppc4xx/dcr.S index 0d99391..6b13528 100644 --- a/arch/powerpc/cpu/ppc4xx/dcr.S +++ b/arch/powerpc/cpu/ppc4xx/dcr.S @@ -10,8 +10,6 @@ #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/ppc4xx/kgdb.S b/arch/powerpc/cpu/ppc4xx/kgdb.S index dbc4a6c..f274c5d 100644 --- a/arch/powerpc/cpu/ppc4xx/kgdb.S +++ b/arch/powerpc/cpu/ppc4xx/kgdb.S @@ -10,7 +10,6 @@ #include <version.h> #define CONFIG_405GP 1 /* needed for Linux kernel header files */ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 38bbc5a..e72c37c 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -31,8 +31,6 @@ #include <asm/ppc4xx.h> #include <version.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 54ce2f0..56587ae 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -22,6 +22,9 @@ #define FSL_DDR_VER_4_7 47 #define FSL_DDR_VER_5_0 50 +/* IP endianness */ +#define CONFIG_SYS_FSL_IFC_BE + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -152,6 +155,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x10 +#define CONFIG_ESDHC_HC_BLK_ADDR /* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) @@ -552,6 +556,7 @@ #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A005125 +#define CONFIG_ESDHC_HC_BLK_ADDR #elif defined(CONFIG_BSC9132) #define CONFIG_MAX_CPUS 2 @@ -575,6 +580,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 +#define CONFIG_ESDHC_HC_BLK_ADDR #elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define CONFIG_E6500 @@ -714,8 +720,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h index 3cac2d4..a590919 100644 --- a/arch/powerpc/include/asm/fsl_errata.h +++ b/arch/powerpc/include/asm/fsl_errata.h @@ -15,7 +15,11 @@ static inline bool has_erratum_a006379(void) { u32 svr = get_svr(); if (((SVR_SOC_VER(svr) == SVR_T4240) && SVR_MAJ(svr) <= 1) || - ((SVR_SOC_VER(svr) == SVR_B4860) && SVR_MAJ(svr) <= 2)) + ((SVR_SOC_VER(svr) == SVR_T4160) && SVR_MAJ(svr) <= 1) || + ((SVR_SOC_VER(svr) == SVR_B4860) && SVR_MAJ(svr) <= 2) || + ((SVR_SOC_VER(svr) == SVR_B4420) && SVR_MAJ(svr) <= 2) || + ((SVR_SOC_VER(svr) == SVR_T2080) && SVR_MAJ(svr) <= 1) || + ((SVR_SOC_VER(svr) == SVR_T2081) && SVR_MAJ(svr) <= 1)) return true; return false; diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 404ded4..f60cb0a 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -69,13 +69,7 @@ enum srds_prtcl { XFI_FM2_MAC9, XFI_FM2_MAC10, INTERLAKEN, - SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */ - SGMII_SW1_DTSEC2, - SGMII_SW1_DTSEC3, - SGMII_SW1_DTSEC4, - SGMII_SW1_DTSEC5, - SGMII_SW1_DTSEC6, - QSGMII_SW1_A, /* SW indicates on L2 swtich */ + QSGMII_SW1_A, /* Indicates ports on L2 Switch */ QSGMII_SW1_B, }; diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 68c3c82..9d08321 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1759,6 +1759,17 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#define FSL_CORENET_RCWSR13_EC1 0x30000000 /* bits 418..419 */ +#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM1_GPIO 0x10000000 +#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII 0x20000000 +#define FSL_CORENET_RCWSR13_EC2 0x0c000000 /* bits 420..421 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII 0x20000000 +#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL 0x00000080 +#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH 0x00000000 +#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT 0x80000000 #elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 diff --git a/arch/powerpc/include/asm/iopin_85xx.h b/arch/powerpc/include/asm/iopin_85xx.h deleted file mode 100644 index 0f07ba3..0000000 --- a/arch/powerpc/include/asm/iopin_85xx.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * MPC85xx I/O port pin manipulation functions - */ - -#ifndef _ASM_IOPIN_85xx_H_ -#define _ASM_IOPIN_85xx_H_ - -#include <linux/types.h> -#include <asm/immap_85xx.h> - -#ifdef __KERNEL__ - -typedef struct { - u_char port:2; /* port number (A=0, B=1, C=2, D=3) */ - u_char pin:5; /* port pin (0-31) */ - u_char flag:1; /* for whatever */ -} iopin_t; - -#define IOPIN_PORTA 0 -#define IOPIN_PORTB 1 -#define IOPIN_PORTC 2 -#define IOPIN_PORTD 3 - -extern __inline__ void iopin_set_high (iopin_t * iopin) -{ - volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; - datp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -extern __inline__ void iopin_set_low (iopin_t * iopin) -{ - volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; - datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -extern __inline__ uint iopin_is_high (iopin_t * iopin) -{ - volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; - return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -extern __inline__ uint iopin_is_low (iopin_t * iopin) -{ - volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; - return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -extern __inline__ void iopin_set_out (iopin_t * iopin) -{ - volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; - dirp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -extern __inline__ void iopin_set_in (iopin_t * iopin) -{ - volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; - dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -extern __inline__ uint iopin_is_out (iopin_t * iopin) -{ - volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; - return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -extern __inline__ uint iopin_is_in (iopin_t * iopin) -{ - volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; - return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -extern __inline__ void iopin_set_odr (iopin_t * iopin) -{ - volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; - odrp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -extern __inline__ void iopin_set_act (iopin_t * iopin) -{ - volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; - odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -extern __inline__ uint iopin_is_odr (iopin_t * iopin) -{ - volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; - return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -extern __inline__ uint iopin_is_act (iopin_t * iopin) -{ - volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; - return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -extern __inline__ void iopin_set_ded (iopin_t * iopin) -{ - volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; - parp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -extern __inline__ void iopin_set_gen (iopin_t * iopin) -{ - volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; - parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -extern __inline__ uint iopin_is_ded (iopin_t * iopin) -{ - volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; - return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -extern __inline__ uint iopin_is_gen (iopin_t * iopin) -{ - volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; - return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -extern __inline__ void iopin_set_opt2 (iopin_t * iopin) -{ - volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; - sorp[iopin->port * 8] |= (1 << (31 - iopin->pin)); -} - -extern __inline__ void iopin_set_opt1 (iopin_t * iopin) -{ - volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; - sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); -} - -extern __inline__ uint iopin_is_opt2 (iopin_t * iopin) -{ - volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; - return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1; -} - -extern __inline__ uint iopin_is_opt1 (iopin_t * iopin) -{ - volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; - return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IOPIN_85xx_H_ */ diff --git a/arch/powerpc/include/asm/pnp.h b/arch/powerpc/include/asm/pnp.h deleted file mode 100644 index 22ceba2..0000000 --- a/arch/powerpc/include/asm/pnp.h +++ /dev/null @@ -1,643 +0,0 @@ -/* 11/02/95 */ -/*----------------------------------------------------------------------------*/ -/* Plug and Play header definitions */ -/*----------------------------------------------------------------------------*/ - -/* Structure map for PnP on PowerPC Reference Platform */ -/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */ -/* (or later versions) is available on Compuserve in the PLUGPLAY area. */ -/* This code has extensions to that specification, namely new short and */ -/* long tag types for platform dependent information */ - -/* Warning: LE notation used throughout this file */ - -/* For enum's: if given in hex then they are bit significant, i.e. */ -/* only one bit is on for each enum */ - -#ifndef _PNP_ -#define _PNP_ - -#ifndef __ASSEMBLY__ -#define MAX_MEM_REGISTERS 9 -#define MAX_IO_PORTS 20 -#define MAX_IRQS 7 -/*#define MAX_DMA_CHANNELS 7*/ - -/* Interrupt controllers */ - -#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */ -#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */ -#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */ -#define PNPinterrupt3 "PNP0003" /* APIC */ -#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */ - -/* Timers */ - -#define PNPtimer0 "PNP0100" /* AT Timer */ -#define PNPtimer1 "PNP0101" /* EISA Timer */ -#define PNPtimer2 "PNP0102" /* MCA Timer */ - -/* DMA controllers */ - -#define PNPdma0 "PNP0200" /* AT DMA Controller */ -#define PNPdma1 "PNP0201" /* EISA DMA Controller */ -#define PNPdma2 "PNP0202" /* MCA DMA Controller */ - -/* start of August 15, 1994 additions */ -/* CMOS */ -#define PNPCMOS "IBM0009" /* CMOS */ - -/* L2 Cache */ -#define PNPL2 "IBM0007" /* L2 Cache */ - -/* NVRAM */ -#define PNPNVRAM "IBM0008" /* NVRAM */ - -/* Power Management */ -#define PNPPM "IBM0005" /* Power Management */ -/* end of August 15, 1994 additions */ - -/* Keyboards */ - -#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */ -#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */ -#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */ -#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */ -#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */ -#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */ -#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */ -#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */ - -/* Parallel port controllers */ - -#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */ -#define PNPparallel1 "PNP0401" /* ECP Parallel Port */ -#define PNPepp "IBM001C" /* EPP Parallel Port */ - -/* Serial port controllers */ - -#define PNPserial0 "PNP0500" /* Standard PC Serial port */ -#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */ - -/* Disk controllers */ - -#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */ -#define PNPdisk1 "PNP0601" /* Plus Hardcard II */ -#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */ - -/* Diskette controllers */ - -#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */ - -/* Display controllers */ - -#define PNPdisplay0 "PNP0900" /* VGA Compatible */ -#define PNPdisplay1 "PNP0901" /* Video Seven VGA */ -#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */ -#define PNPdisplay3 "PNP0903" /* Trident VGA */ -#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */ -#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */ -#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */ -#define PNPdisplay7 "PNP0907" /* Western Digital VGA */ -#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */ -#define PNPdisplay9 "PNP0909" /* S3 */ -#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */ -#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */ -#define PNPdisplayC "PNP090C" /* XGA Compatible */ -#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */ -#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */ -#define PNPdisplayF "PNP090F" /* Oak Technology VGA */ - -/* Peripheral busses */ - -#define PNPbuses0 "PNP0A00" /* ISA Bus */ -#define PNPbuses1 "PNP0A01" /* EISA Bus */ -#define PNPbuses2 "PNP0A02" /* MCA Bus */ -#define PNPbuses3 "PNP0A03" /* PCI Bus */ -#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */ - -/* RTC, BIOS, planar devices */ - -#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */ -#define PNPrtc0 "PNP0B00" /* AT RTC */ -#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */ -#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */ -#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */ -#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */ - -/* PCMCIA controller */ - -#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */ - -/* Mice */ - -#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */ -#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */ -#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */ -#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */ -#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */ -#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */ -#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */ -#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */ -#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */ -#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */ -#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */ -#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */ - -/* Modems */ - -#define PNPmodem0 "PNP9000" /* Specific IDs TBD */ - -/* Network controllers */ - -#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */ -#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */ -#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */ -#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */ -#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */ -#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */ -#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */ -#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */ - -/* SCSI controllers */ - -#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */ -#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */ -#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/ -#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */ -#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */ -#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */ -#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */ - -/* Sound/Video, Multimedia */ - -#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */ -#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */ -#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */ -#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */ -#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */ -#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */ -#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */ -#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */ - -/* Operator Panel */ -#define PNPopctl "IBM000B" /* Operator's panel */ - -/* Service Processor */ -#define PNPsp "IBM0011" /* IBM Service Processor */ -#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */ -#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */ - -/* Memory Controller */ -#define PNPmemctl "IBM000A" /* Memory controller */ - -/* Graphics Assist */ -#define PNPg_assist "IBM0014" /* Graphics Assist */ - -/* Miscellaneous Device Controllers */ -#define PNPtablet "IBM0019" /* IBM Tablet Controller */ - -/* PNP Packet Handles */ - -#define S1_Packet 0x0A /* Version resource */ -#define S2_Packet 0x15 /* Logical DEVID (without flags) */ -#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */ -#define S3_Packet 0x1C /* Compatible device ID */ -#define S4_Packet 0x22 /* IRQ resource (without flags) */ -#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */ -#define S5_Packet 0x2A /* DMA resource */ -#define S6_Packet 0x30 /* Depend funct start (w/o priority) */ -#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */ -#define S7_Packet 0x38 /* Depend funct end */ -#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */ -#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */ -#define S14_Packet 0x71 /* Vendor defined */ -#define S15_Packet 0x78 /* End of resource (w/o checksum) */ -#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */ -#define L1_Packet 0x81 /* Memory range */ -#define L1_Shadow 0x20 /* Memory is shadowable */ -#define L1_32bit_mem 0x18 /* 32-bit memory only */ -#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */ -#define L1_Decode_Hi 0x04 /* decode supports high address */ -#define L1_Cache 0x02 /* read cacheable, write-through */ -#define L1_Writeable 0x01 /* Memory is writeable */ -#define L2_Packet 0x82 /* ANSI ID string */ -#define L3_Packet 0x83 /* Unicode ID string */ -#define L4_Packet 0x84 /* Vendor defined */ -#define L5_Packet 0x85 /* Large I/O */ -#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */ -#define END_TAG 0x78 /* End of resource */ -#define DF_START_TAG 0x30 /* Dependent function start */ -#define DF_START_TAG_priority 0x31 /* Dependent function start */ -#define DF_END_TAG 0x38 /* Dependent function end */ -#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */ - -/* Device Base Type Codes */ - -typedef enum _PnP_BASE_TYPE { - Reserved = 0, - MassStorageDevice = 1, - NetworkInterfaceController = 2, - DisplayController = 3, - MultimediaController = 4, - MemoryController = 5, - BridgeController = 6, - CommunicationsDevice = 7, - SystemPeripheral = 8, - InputDevice = 9, - ServiceProcessor = 0x0A, /* 11/2/95 */ - } PnP_BASE_TYPE; - -/* Device Sub Type Codes */ - -typedef enum _PnP_SUB_TYPE { - SCSIController = 0, - IDEController = 1, - FloppyController = 2, - IPIController = 3, - OtherMassStorageController = 0x80, - - EthernetController = 0, - TokenRingController = 1, - FDDIController = 2, - OtherNetworkController = 0x80, - - VGAController= 0, - SVGAController= 1, - XGAController= 2, - OtherDisplayController = 0x80, - - VideoController = 0, - AudioController = 1, - OtherMultimediaController = 0x80, - - RAM = 0, - FLASH = 1, - OtherMemoryDevice = 0x80, - - HostProcessorBridge = 0, - ISABridge = 1, - EISABridge = 2, - MicroChannelBridge = 3, - PCIBridge = 4, - PCMCIABridge = 5, - VMEBridge = 6, - OtherBridgeDevice = 0x80, - - RS232Device = 0, - ATCompatibleParallelPort = 1, - OtherCommunicationsDevice = 0x80, - - ProgrammableInterruptController = 0, - DMAController = 1, - SystemTimer = 2, - RealTimeClock = 3, - L2Cache = 4, - NVRAM = 5, - PowerManagement = 6, - CMOS = 7, - OperatorPanel = 8, - ServiceProcessorClass1 = 9, - ServiceProcessorClass2 = 0xA, - ServiceProcessorClass3 = 0xB, - GraphicAssist = 0xC, - SystemPlanar = 0xF, /* 10/5/95 */ - OtherSystemPeripheral = 0x80, - - KeyboardController = 0, - Digitizer = 1, - MouseController = 2, - TabletController = 3, /* 10/27/95 */ - OtherInputController = 0x80, - - GeneralMemoryController = 0, - } PnP_SUB_TYPE; - -/* Device Interface Type Codes */ - -typedef enum _PnP_INTERFACE { - General = 0, - GeneralSCSI = 0, - GeneralIDE = 0, - ATACompatible = 1, - - GeneralFloppy = 0, - Compatible765 = 1, - NS398_Floppy = 2, /* NS Super I/O wired to use index - register at port 398 and data - register at port 399 */ - NS26E_Floppy = 3, /* Ports 26E and 26F */ - NS15C_Floppy = 4, /* Ports 15C and 15D */ - NS2E_Floppy = 5, /* Ports 2E and 2F */ - CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */ - - GeneralIPI = 0, - - GeneralEther = 0, - GeneralToken = 0, - GeneralFDDI = 0, - - GeneralVGA = 0, - GeneralSVGA = 0, - GeneralXGA = 0, - - GeneralVideo = 0, - GeneralAudio = 0, - CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */ - - GeneralRAM = 0, - GeneralFLASH = 0, - PCIMemoryController = 0, /* PCI Config Method */ - RS6KMemoryController = 1, /* RS6K Config Method */ - - GeneralHostBridge = 0, - GeneralISABridge = 0, - GeneralEISABridge = 0, - GeneralMCABridge = 0, - GeneralPCIBridge = 0, - PCIBridgeDirect = 0, - PCIBridgeIndirect = 1, - PCIBridgeRS6K = 2, - GeneralPCMCIABridge = 0, - GeneralVMEBridge = 0, - - GeneralRS232 = 0, - COMx = 1, - Compatible16450 = 2, - Compatible16550 = 3, - NS398SerPort = 4, /* NS Super I/O wired to use index - register at port 398 and data - register at port 399 */ - NS26ESerPort = 5, /* Ports 26E and 26F */ - NS15CSerPort = 6, /* Ports 15C and 15D */ - NS2ESerPort = 7, /* Ports 2E and 2F */ - - GeneralParPort = 0, - LPTx = 1, - NS398ParPort = 2, /* NS Super I/O wired to use index - register at port 398 and data - register at port 399 */ - NS26EParPort = 3, /* Ports 26E and 26F */ - NS15CParPort = 4, /* Ports 15C and 15D */ - NS2EParPort = 5, /* Ports 2E and 2F */ - - GeneralPIC = 0, - ISA_PIC = 1, - EISA_PIC = 2, - MPIC = 3, - RS6K_PIC = 4, - - GeneralDMA = 0, - ISA_DMA = 1, - EISA_DMA = 2, - - GeneralTimer = 0, - ISA_Timer = 1, - EISA_Timer = 2, - GeneralRTC = 0, - ISA_RTC = 1, - - StoreThruOnly = 1, - StoreInEnabled = 2, - RS6KL2Cache = 3, - - IndirectNVRAM = 0, /* Indirectly addressed */ - DirectNVRAM = 1, /* Memory Mapped */ - IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */ - - GeneralPowerManagement = 0, - EPOWPowerManagement = 1, - PowerControl = 2, /* d1378 */ - - GeneralCMOS = 0, - - GeneralOPPanel = 0, - HarddiskLight = 1, - CDROMLight = 2, - PowerLight = 3, - KeyLock = 4, - ANDisplay = 5, /* AlphaNumeric Display */ - SystemStatusLED = 6, /* 3 digit 7 segment LED */ - CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */ - - GeneralServiceProcessor = 0, - - TransferData = 1, - IGMC32 = 2, - IGMC64 = 3, - - GeneralSystemPlanar = 0, /* 10/5/95 */ - - } PnP_INTERFACE; - -/* PnP resources */ - -/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */ - -typedef struct _SERIAL_ID { - unsigned char VendorID0; /* Bit(7)=0 */ - /* Bits(6:2)=1st character in */ - /* compressed ASCII */ - /* Bits(1:0)=2nd character in */ - /* compressed ASCII bits(4:3) */ - unsigned char VendorID1; /* Bits(7:5)=2nd character in */ - /* compressed ASCII bits(2:0) */ - /* Bits(4:0)=3rd character in */ - /* compressed ASCII */ - unsigned char VendorID2; /* Product number - vendor assigned */ - unsigned char VendorID3; /* Product number - vendor assigned */ - -/* Serial number is to provide uniqueness if more than one board of same */ -/* type is in system. Must be "FFFFFFFF" if feature not supported. */ - - unsigned char Serial0; /* Unique serial number bits (7:0) */ - unsigned char Serial1; /* Unique serial number bits (15:8) */ - unsigned char Serial2; /* Unique serial number bits (23:16) */ - unsigned char Serial3; /* Unique serial number bits (31:24) */ - unsigned char Checksum; - } SERIAL_ID; - -typedef enum _PnPItemName { - Unused = 0, - PnPVersion = 1, - LogicalDevice = 2, - CompatibleDevice = 3, - IRQFormat = 4, - DMAFormat = 5, - StartDepFunc = 6, - EndDepFunc = 7, - IOPort = 8, - FixedIOPort = 9, - Res1 = 10, - Res2 = 11, - Res3 = 12, - SmallVendorItem = 14, - EndTag = 15, - MemoryRange = 1, - ANSIIdentifier = 2, - UnicodeIdentifier = 3, - LargeVendorItem = 4, - MemoryRange32 = 5, - MemoryRangeFixed32 = 6, - } PnPItemName; - -/* Define a bunch of access functions for the bits in the tag field */ - -/* Tag type - 0 = small; 1 = large */ -#define tag_type(t) (((t) & 0x80)>>7) -#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7)) - -/* Small item name is 4 bits - one of PnPItemName enum above */ -#define tag_small_item_name(t) (((t) & 0x78)>>3) -#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3)) - -/* Small item count is 3 bits - count of further bytes in packet */ -#define tag_small_count(t) ((t) & 0x07) -#define set_tag_count(t,v) (t = (t & 0x78) | (v)) - -/* Large item name is 7 bits - one of PnPItemName enum above */ -#define tag_large_item_name(t) ((t) & 0x7f) -#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v)) - -/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */ - -typedef union _PnP_TAG_PACKET { - struct _S1_Pack{ /* VERSION PACKET */ - unsigned char Tag; /* small tag = 0x0a */ - unsigned char Version[2]; /* PnP version, Vendor version */ - } S1_Pack; - - struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */ - unsigned char Tag; /* small tag = 0x15 or 0x16 */ - unsigned char DevId[4]; /* Logical device id */ - unsigned char Flags[2]; /* bit(0) boot device; */ - /* bit(7:1) cmd in range x31-x37 */ - /* bit(7:0) cmd in range x28-x3f (opt)*/ - } S2_Pack; - - struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */ - unsigned char Tag; /* small tag = 0x1c */ - unsigned char CompatId[4]; /* Compatible device id */ - } S3_Pack; - - struct _S4_Pack{ /* IRQ PACKET */ - unsigned char Tag; /* small tag = 0x22 or 0x23 */ - unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */ - /* bit(0) is IRQ8 ... */ - unsigned char IRQInfo; /* optional; assume bit(0)=1; else */ - /* bit(0) - high true edge sensitive */ - /* bit(1) - low true edge sensitive */ - /* bit(2) - high true level sensitive*/ - /* bit(3) - low true level sensitive */ - /* bit(7:4) - must be 0 */ - } S4_Pack; - - struct _S5_Pack{ /* DMA PACKET */ - unsigned char Tag; /* small tag = 0x2a */ - unsigned char DMAMask; /* bit(0) is channel 0 ... */ - unsigned char DMAInfo; - } S5_Pack; - - struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */ - unsigned char Tag; /* small tag = 0x30 or 0x31 */ - unsigned char Priority; /* Optional; if missing then x01; else*/ - /* x00 = best possible */ - /* x01 = acceptible */ - /* x02 = sub-optimal but functional */ - } S6_Pack; - - struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */ - unsigned char Tag; /* small tag = 0x38 */ - } S7_Pack; - - struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */ - unsigned char Tag; /* small tag x47 */ - unsigned char IOInfo; /* x0 = decode only bits(9:0); */ -#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */ - unsigned char RangeMin[2]; /* Min base address */ - unsigned char RangeMax[2]; /* Max base address */ - unsigned char IOAlign; /* base alignmt, incr in 1B blocks */ - unsigned char IONum; /* number of contiguous I/O ports */ - } S8_Pack; - - struct _S9_Pack{ /* FIXED I/O PORT PACKET */ - unsigned char Tag; /* small tag = 0x4b */ - unsigned char Range[2]; /* base address 10 bits */ - unsigned char IONum; /* number of contiguous I/O ports */ - } S9_Pack; - - struct _S14_Pack{ /* VENDOR DEFINED PACKET */ - unsigned char Tag; /* small tag = 0x7m m = 1-7 */ - union _S14_Data{ - unsigned char Data[7]; /* Vendor defined */ - struct _S14_PPCPack{ /* Pr*p s14 pack */ - unsigned char Type; /* 00=non-IBM */ - unsigned char PPCData[6]; /* Vendor defined */ - } S14_PPCPack; - } S14_Data; - } S14_Pack; - - struct _S15_Pack{ /* END PACKET */ - unsigned char Tag; /* small tag = 0x78 or 0x79 */ - unsigned char Check; /* optional - checksum */ - } S15_Pack; - - struct _L1_Pack{ /* MEMORY RANGE PACKET */ - unsigned char Tag; /* large tag = 0x81 */ - unsigned char Count0; /* x09 */ - unsigned char Count1; /* x00 */ - unsigned char Data[9]; /* a variable array of bytes, */ - /* count in tag */ - } L1_Pack; - - struct _L2_Pack{ /* ANSI ID STRING PACKET */ - unsigned char Tag; /* large tag = 0x82 */ - unsigned char Count0; /* Length of string */ - unsigned char Count1; - unsigned char Identifier[1]; /* a variable array of bytes, */ - /* count in tag */ - } L2_Pack; - - struct _L3_Pack{ /* UNICODE ID STRING PACKET */ - unsigned char Tag; /* large tag = 0x83 */ - unsigned char Count0; /* Length + 2 of string */ - unsigned char Count1; - unsigned char Country0; /* TBD */ - unsigned char Country1; /* TBD */ - unsigned char Identifier[1]; /* a variable array of bytes, */ - /* count in tag */ - } L3_Pack; - - struct _L4_Pack{ /* VENDOR DEFINED PACKET */ - unsigned char Tag; /* large tag = 0x84 */ - unsigned char Count0; - unsigned char Count1; - union _L4_Data{ - unsigned char Data[1]; /* a variable array of bytes, */ - /* count in tag */ - struct _L4_PPCPack{ /* Pr*p L4 packet */ - unsigned char Type; /* 00=non-IBM */ - unsigned char PPCData[1]; /* a variable array of bytes, */ - /* count in tag */ - } L4_PPCPack; - } L4_Data; - } L4_Pack; - - struct _L5_Pack{ - unsigned char Tag; /* large tag = 0x85 */ - unsigned char Count0; /* Count = 17 */ - unsigned char Count1; - unsigned char Data[17]; - } L5_Pack; - - struct _L6_Pack{ - unsigned char Tag; /* large tag = 0x86 */ - unsigned char Count0; /* Count = 9 */ - unsigned char Count1; - unsigned char Data[9]; - } L6_Pack; - - } PnP_TAG_PACKET; - -#endif /* __ASSEMBLY__ */ -#endif /* ndef _PNP_ */ diff --git a/arch/powerpc/include/asm/residual.h b/arch/powerpc/include/asm/residual.h deleted file mode 100644 index dc85edb..0000000 --- a/arch/powerpc/include/asm/residual.h +++ /dev/null @@ -1,331 +0,0 @@ -/* 7/18/95 */ -/*----------------------------------------------------------------------------*/ -/* Residual Data header definitions and prototypes */ -/*----------------------------------------------------------------------------*/ - -/* Structure map for RESIDUAL on PowerPC Reference Platform */ -/* residual.h - Residual data structure passed in r3. */ -/* Load point passed in r4 to boot image. */ -/* For enum's: if given in hex then they are bit significant, */ -/* i.e. only one bit is on for each enum */ -/* Reserved fields must be filled with zeros. */ - -#ifndef _RESIDUAL_ -#define _RESIDUAL_ - -#ifndef __ASSEMBLY__ - -#define MAX_CPUS 32 /* These should be set to the maximum */ -#define MAX_MEMS 64 /* number possible for this system. */ -#define MAX_DEVICES 256 /* Changing these will change the */ -#define AVE_PNP_SIZE 32 /* structure, hence the version of */ -#define MAX_MEM_SEGS 64 /* this header file. */ - -/*----------------------------------------------------------------------------*/ -/* Public structures... */ -/*----------------------------------------------------------------------------*/ - -#include "pnp.h" - -typedef enum _L1CACHE_TYPE { - NoneCAC = 0, - SplitCAC = 1, - CombinedCAC = 2 - } L1CACHE_TYPE; - -typedef enum _TLB_TYPE { - NoneTLB = 0, - SplitTLB = 1, - CombinedTLB = 2 - } TLB_TYPE; - -typedef enum _FIRMWARE_SUPPORT { - Conventional = 0x01, - OpenFirmware = 0x02, - Diagnostics = 0x04, - LowDebug = 0x08, - Multiboot = 0x10, - LowClient = 0x20, - Hex41 = 0x40, - FAT = 0x80, - ISO9660 = 0x0100, - SCSI_InitiatorID_Override = 0x0200, - Tape_Boot = 0x0400, - FW_Boot_Path = 0x0800 - } FIRMWARE_SUPPORT; - -typedef enum _FIRMWARE_SUPPLIERS { - IBMFirmware = 0x00, - MotoFirmware = 0x01, /* 7/18/95 */ - FirmWorks = 0x02, /* 10/5/95 */ - Bull = 0x03, /* 04/03/96 */ - } FIRMWARE_SUPPLIERS; - -typedef enum _ENDIAN_SWITCH_METHODS { - UsePort92 = 0x01, - UsePCIConfigA8 = 0x02, - UseFF001030 = 0x03, - } ENDIAN_SWITCH_METHODS; - -typedef enum _SPREAD_IO_METHODS { - UsePort850 = 0x00, -/*UsePCIConfigA8 = 0x02,*/ - } SPREAD_IO_METHODS; - -typedef struct _VPD { - - /* Box dependent stuff */ - unsigned char PrintableModel[32]; /* Null terminated string. - Must be of the form: - vvv,<20h>,<model designation>,<0x0> - where vvv is the vendor ID - e.g. IBM PPS MODEL 6015<0x0> */ - unsigned char Serial[16]; /* 12/94: - Serial Number; must be of the form: - vvv<serial number> where vvv is the - vendor ID. - e.g. IBM60151234567<20h><20h> */ - unsigned char Reserved[48]; - unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */ - unsigned long FirmwareSupports; /* See FirmwareSupport enum */ - unsigned long NvramSize; /* Size of nvram in bytes */ - unsigned long NumSIMMSlots; - unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */ - unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */ - unsigned long SmpIar; - unsigned long RAMErrLogOffset; /* Heap offset to error log */ - unsigned long Reserved5; - unsigned long Reserved6; - unsigned long ProcessorHz; /* Processor clock frequency in Hertz */ - unsigned long ProcessorBusHz; /* Processor bus clock frequency */ - unsigned long Reserved7; - unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */ - unsigned long WordWidth; /* Word width in bits */ - unsigned long PageSize; /* Page size in bytes */ - unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache - for which coherency is maintained; - normally <= CacheLineSize. */ - unsigned long GranuleSize; /* Unit of lock allocation to avoid */ - /* false sharing of locks. */ - - /* L1 Cache variables */ - unsigned long CacheSize; /* L1 Cache size in KB. This is the */ - /* total size of the L1, whether */ - /* combined or split */ - unsigned long CacheAttrib; /* L1CACHE_TYPE */ - unsigned long CacheAssoc; /* L1 Cache associativity. Use this - for combined cache. If split, put - zeros here. */ - unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use - for combined cache. If split, put - zeros here. */ - /* For split L1 Cache: (= combined if combined cache) */ - unsigned long I_CacheSize; - unsigned long I_CacheAssoc; - unsigned long I_CacheLineSize; - unsigned long D_CacheSize; - unsigned long D_CacheAssoc; - unsigned long D_CacheLineSize; - - /* Translation Lookaside Buffer variables */ - unsigned long TLBSize; /* Total number of TLBs on the system */ - unsigned long TLBAttrib; /* Combined I+D or split TLB */ - unsigned long TLBAssoc; /* TLB Associativity. Use this for - combined TLB. If split, put zeros - here. */ - /* For split TLB: (= combined if combined TLB) */ - unsigned long I_TLBSize; - unsigned long I_TLBAssoc; - unsigned long D_TLBSize; - unsigned long D_TLBAssoc; - - unsigned long ExtendedVPD; /* Offset to extended VPD area; - null if unused */ - } VPD; - -typedef enum _DEVICE_FLAGS { - Enabled = 0x4000, /* 1 - PCI device is enabled */ - Integrated = 0x2000, - Failed = 0x1000, /* 1 - device failed POST code tests */ - Static = 0x0800, /* 0 - dynamically configurable - 1 - static */ - Dock = 0x0400, /* 0 - not a docking station device - 1 - is a docking station device */ - Boot = 0x0200, /* 0 - device cannot be used for BOOT - 1 - can be a BOOT device */ - Configurable = 0x0100, /* 1 - device is configurable */ - Disableable = 0x80, /* 1 - device can be disabled */ - PowerManaged = 0x40, /* 0 - not managed; 1 - managed */ - ReadOnly = 0x20, /* 1 - device is read only */ - Removable = 0x10, /* 1 - device is removable */ - ConsoleIn = 0x08, - ConsoleOut = 0x04, - Input = 0x02, - Output = 0x01 - } DEVICE_FLAGS; - -typedef enum _BUS_ID { - ISADEVICE = 0x01, - EISADEVICE = 0x02, - PCIDEVICE = 0x04, - PCMCIADEVICE = 0x08, - PNPISADEVICE = 0x10, - MCADEVICE = 0x20, - MXDEVICE = 0x40, /* Devices on mezzanine bus */ - PROCESSORDEVICE = 0x80, /* Devices on processor bus */ - VMEDEVICE = 0x100, - } BUS_ID; - -typedef struct _DEVICE_ID { - unsigned long BusId; /* See BUS_ID enum above */ - unsigned long DevId; /* Big Endian format */ - unsigned long SerialNum; /* For multiple usage of a single - DevId */ - unsigned long Flags; /* See DEVICE_FLAGS enum above */ - unsigned char BaseType; /* See pnp.h for bit definitions */ - unsigned char SubType; /* See pnp.h for bit definitions */ - unsigned char Interface; /* See pnp.h for bit definitions */ - unsigned char Spare; - } DEVICE_ID; - -typedef union _BUS_ACCESS { - struct _PnPAccess{ - unsigned char CSN; - unsigned char LogicalDevNumber; - unsigned short ReadDataPort; - } PnPAccess; - struct _ISAAccess{ - unsigned char SlotNumber; /* ISA Slot Number generally not - available; 0 if unknown */ - unsigned char LogicalDevNumber; - unsigned short ISAReserved; - } ISAAccess; - struct _MCAAccess{ - unsigned char SlotNumber; - unsigned char LogicalDevNumber; - unsigned short MCAReserved; - } MCAAccess; - struct _PCMCIAAccess{ - unsigned char SlotNumber; - unsigned char LogicalDevNumber; - unsigned short PCMCIAReserved; - } PCMCIAAccess; - struct _EISAAccess{ - unsigned char SlotNumber; - unsigned char FunctionNumber; - unsigned short EISAReserved; - } EISAAccess; - struct _PCIAccess{ - unsigned char BusNumber; - unsigned char DevFuncNumber; - unsigned short PCIReserved; - } PCIAccess; - struct _ProcBusAccess{ - unsigned char BusNumber; - unsigned char BUID; - unsigned short ProcBusReserved; - } ProcBusAccess; - } BUS_ACCESS; - -/* Per logical device information */ -typedef struct _PPC_DEVICE { - DEVICE_ID DeviceId; - BUS_ACCESS BusAccess; - - /* The following three are offsets into the DevicePnPHeap */ - /* All are in PnP compressed format */ - unsigned long AllocatedOffset; /* Allocated resource description */ - unsigned long PossibleOffset; /* Possible resource description */ - unsigned long CompatibleOffset; /* Compatible device identifiers */ - } PPC_DEVICE; - -typedef enum _CPU_STATE { - CPU_GOOD = 0, /* CPU is present, and active */ - CPU_GOOD_FW = 1, /* CPU is present, and in firmware */ - CPU_OFF = 2, /* CPU is present, but inactive */ - CPU_FAILED = 3, /* CPU is present, but failed POST */ - CPU_NOT_PRESENT = 255 /* CPU not present */ - } CPU_STATE; - -typedef struct _PPC_CPU { - unsigned long CpuType; /* Result of mfspr from Processor - Version Register (PVR). - PVR(0-15) = Version (e.g. 601) - PVR(16-31 = EC Level */ - unsigned char CpuNumber; /* CPU Number for this processor */ - unsigned char CpuState; /* CPU State, see CPU_STATE enum */ - unsigned short Reserved; - } PPC_CPU; - -typedef struct _PPC_MEM { - unsigned long SIMMSize; /* 0 - absent or bad - 8M, 32M (in MB) */ - } PPC_MEM; - -typedef enum _MEM_USAGE { - Other = 0x8000, - ResumeBlock = 0x4000, /* for use by power management */ - SystemROM = 0x2000, /* Flash memory (populated) */ - UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */ - IOMemory = 0x0800, - SystemIO = 0x0400, - SystemRegs = 0x0200, - PCIAddr = 0x0100, - PCIConfig = 0x80, - ISAAddr = 0x40, - Unpopulated = 0x20, /* Unpopulated part of System Memory */ - Free = 0x10, /* Free part of System Memory */ - BootImage = 0x08, /* BootImage part of System Memory */ - FirmwareCode = 0x04, /* FirmwareCode part of System Memory */ - FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */ - FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/ - } MEM_USAGE; - -typedef struct _MEM_MAP { - unsigned long Usage; /* See MEM_USAGE above */ - unsigned long BasePage; /* Page number measured in 4KB pages */ - unsigned long PageCount; /* Page count measured in 4KB pages */ - } MEM_MAP; - -typedef struct _RESIDUAL { - unsigned long ResidualLength; /* Length of Residual */ - unsigned char Version; /* of this data structure */ - unsigned char Revision; /* of this data structure */ - unsigned short EC; /* of this data structure */ - /* VPD */ - VPD VitalProductData; - /* CPU */ - unsigned short MaxNumCpus; /* Max CPUs in this system */ - unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */ - /* that there are unpopulated or */ - /* otherwise unusable cpu locations */ - PPC_CPU Cpus[MAX_CPUS]; - /* Memory */ - unsigned long TotalMemory; /* Total amount of memory installed */ - unsigned long GoodMemory; /* Total amount of good memory */ - unsigned long ActualNumMemSegs; - MEM_MAP Segs[MAX_MEM_SEGS]; - unsigned long ActualNumMemories; - PPC_MEM Memories[MAX_MEMS]; - /* Devices */ - unsigned long ActualNumDevices; - PPC_DEVICE Devices[MAX_DEVICES]; - unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE]; - } RESIDUAL; - - -extern RESIDUAL *res; -extern void print_residual_device_info(void); -extern PPC_DEVICE *residual_find_device(unsigned long BusMask, - unsigned char * DevID, int BaseType, - int SubType, int Interface, int n); -extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag, - int n); -extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p, - unsigned packet_type, - int n); -extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p, - unsigned packet_type, - int n); -#endif /* __ASSEMBLY__ */ -#endif /* ndef _RESIDUAL_ */ diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile index 58c2537..b564294 100644 --- a/arch/sandbox/cpu/Makefile +++ b/arch/sandbox/cpu/Makefile @@ -10,7 +10,7 @@ obj-y := cpu.o os.o start.o state.o # os.c is build in the system environment, so needs standard includes -$(obj)os.o: ALL_CFLAGS := $(BASE_CPPFLAGS) \ - $(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS)) -$(obj).depend.os: CPPFLAGS := $(BASE_CPPFLAGS) \ - $(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS)) +$(obj)os.o: CFLAGS := $(filter-out -nostdinc,\ + $(patsubst -I%,-idirafter%,$(CFLAGS))) +$(obj).depend.os: CPPFLAGS := $(filter-out -nostdinc,\ + $(patsubst -I%,-idirafter%,$(CPPFLAGS))) diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 725b505..2e2fc58 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -143,7 +143,7 @@ void *os_malloc(size_t length) return hdr + 1; } -void *os_free(void *ptr) +void os_free(void *ptr) { struct os_mem_hdr *hdr = ptr; diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h deleted file mode 100644 index fac2e58..0000000 --- a/arch/x86/include/asm/mtrr.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Generic MTRR (Memory Type Range Register) ioctls. - * Taken from the Linux kernel - * - * (C) Copyright 2012 - * Graeme Russ, <graeme.russ@gmail.com> - * - * Copyright (C) 1997-1999 Richard Gooch <rgooch@atnf.csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ASM_X86_MTRR_H -#define _ASM_X86_MTRR_H - -#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg)) -#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1) - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <linux/ioctl.h> -#include <errno.h> - -#define MTRR_IOCTL_BASE 'M' - -struct mtrr_sentry { - unsigned long base; /* Base address */ - unsigned int size; /* Size of region */ - unsigned int type; /* Type of region */ -}; - -/* - * Warning: this structure has a different order from i386 - * on x86-64. The 32bit emulation code takes care of that. - * But you need to use this for 64bit, otherwise your X server - * will break. - */ - -#ifdef __i386__ -struct mtrr_gentry { - unsigned int regnum; /* Register number */ - unsigned long base; /* Base address */ - unsigned int size; /* Size of region */ - unsigned int type; /* Type of region */ -}; - -#else /* __i386__ */ - -struct mtrr_gentry { - unsigned long base; /* Base address */ - unsigned int size; /* Size of region */ - unsigned int regnum; /* Register number */ - unsigned int type; /* Type of region */ -}; -#endif /* !__i386__ */ - -struct mtrr_var_range { - __u32 base_lo; - __u32 base_hi; - __u32 mask_lo; - __u32 mask_hi; -}; - -/* - * In the Intel processor's MTRR interface, the MTRR type is always held in - * an 8 bit field: - */ -typedef __u8 mtrr_type; - -#define MTRR_NUM_FIXED_RANGES 88 -#define MTRR_MAX_VAR_RANGES 256 - -struct mtrr_state_type { - struct mtrr_var_range var_ranges[MTRR_MAX_VAR_RANGES]; - mtrr_type fixed_ranges[MTRR_NUM_FIXED_RANGES]; - unsigned char enabled; - unsigned char have_fixed; - mtrr_type def_type; -}; - -/* These are the various ioctls */ -#define MTRRIOC_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry) -#define MTRRIOC_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry) -#define MTRRIOC_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry) -#define MTRRIOC_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry) -#define MTRRIOC_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry) -#define MTRRIOC_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry) -#define MTRRIOC_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry) -#define MTRRIOC_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry) -#define MTRRIOC_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry) -#define MTRRIOC_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry) - -/* These are the region types */ -#define MTRR_TYPE_UNCACHABLE 0 -#define MTRR_TYPE_WRCOMB 1 -/*#define MTRR_TYPE_ 2*/ -/*#define MTRR_TYPE_ 3*/ -#define MTRR_TYPE_WRTHROUGH 4 -#define MTRR_TYPE_WRPROT 5 -#define MTRR_TYPE_WRBACK 6 -#define MTRR_NUM_TYPES 7 - -#ifdef __KERNEL__ - -/* The following functions are for use by other drivers */ -# ifdef CONFIG_MTRR -extern u8 mtrr_type_lookup(u64 addr, u64 end); -extern void mtrr_save_fixed_ranges(void *); -extern void mtrr_save_state(void); -extern int mtrr_add(unsigned long base, unsigned long size, - unsigned int type, bool increment); -extern int mtrr_add_page(unsigned long base, unsigned long size, - unsigned int type, bool increment); -extern int mtrr_del(int reg, unsigned long base, unsigned long size); -extern int mtrr_del_page(int reg, unsigned long base, unsigned long size); -extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi); -extern void mtrr_ap_init(void); -extern void mtrr_bp_init(void); -extern void set_mtrr_aps_delayed_init(void); -extern void mtrr_aps_init(void); -extern void mtrr_bp_restore(void); -extern int mtrr_trim_uncached_memory(unsigned long end_pfn); -extern int amd_special_default_mtrr(void); -# else -static inline u8 mtrr_type_lookup(u64 addr, u64 end) -{ - /* - * Return no-MTRRs: - */ - return 0xff; -} -#define mtrr_save_fixed_ranges(arg) do {} while (0) -#define mtrr_save_state() do {} while (0) -static inline int mtrr_del(int reg, unsigned long base, unsigned long size) -{ - return -ENODEV; -} -static inline int mtrr_del_page(int reg, unsigned long base, unsigned long size) -{ - return -ENODEV; -} -static inline int mtrr_trim_uncached_memory(unsigned long end_pfn) -{ - return 0; -} -static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi) -{ -} - -#define mtrr_ap_init() do {} while (0) -#define mtrr_bp_init() do {} while (0) -#define set_mtrr_aps_delayed_init() do {} while (0) -#define mtrr_aps_init() do {} while (0) -#define mtrr_bp_restore() do {} while (0) -# endif - -#ifdef CONFIG_COMPAT -#include <linux/compat.h> - -struct mtrr_sentry32 { - compat_ulong_t base; /* Base address */ - compat_uint_t size; /* Size of region */ - compat_uint_t type; /* Type of region */ -}; - -struct mtrr_gentry32 { - compat_ulong_t regnum; /* Register number */ - compat_uint_t base; /* Base address */ - compat_uint_t size; /* Size of region */ - compat_uint_t type; /* Type of region */ -}; - -#define MTRR_IOCTL_BASE 'M' - -#define MTRRIOC32_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry32) -#define MTRRIOC32_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry32) -#define MTRRIOC32_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry32) -#define MTRRIOC32_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32) -#define MTRRIOC32_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry32) -#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry32) -#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry32) -#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry32) -#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32) -#define MTRRIOC32_KILL_PAGE_ENTRY \ - _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32) -#endif /* CONFIG_COMPAT */ - -#endif /* __KERNEL__ */ - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_X86_MTRR_H */ diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c index 56ba0da..752492f 100644 --- a/board/Marvell/common/serial.c +++ b/board/Marvell/common/serial.c @@ -20,7 +20,6 @@ #include <linux/compiler.h> #include "../include/memory.h" -#include "serial.h" #ifdef CONFIG_DB64360 #include "../db64360/mpsc.h" diff --git a/board/Marvell/common/serial.h b/board/Marvell/common/serial.h deleted file mode 100644 index 264e2d2..0000000 --- a/board/Marvell/common/serial.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus <ingo.assmus@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c index aa126d7..5ab9471 100644 --- a/board/altera/nios2-generic/nios2-generic.c +++ b/board/altera/nios2-generic/nios2-generic.c @@ -16,7 +16,8 @@ void text_base_hook(void); /* nop hook for text_base.S */ -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \ + defined(CONFIG_CFI_FLASH_MTD) static void __early_flash_cmd_reset(void) { /* reset flash before we read env */ @@ -37,7 +38,8 @@ int board_early_init_f(void) "led"); #endif #endif -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \ + defined(CONFIG_CFI_FLASH_MTD) early_flash_cmd_reset(); #endif return 0; diff --git a/board/armltd/vexpress/vexpress_common.c b/board/armltd/vexpress/vexpress_common.c index da5cb01..cb2de2f 100644 --- a/board/armltd/vexpress/vexpress_common.c +++ b/board/armltd/vexpress/vexpress_common.c @@ -119,11 +119,6 @@ void dram_init_banksize(void) get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); } -int timer_init(void) -{ - return 0; -} - /* * Start timer: * Setup a 32 bit timer, running at 1KHz diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile index f41eb30..79d86026 100644 --- a/board/avionic-design/tec-ng/Makefile +++ b/board/avionic-design/tec-ng/Makefile @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) - obj-y := ../common/tamonten-ng.o include ../../nvidia/common/common.mk diff --git a/board/cogent/kbm.h b/board/cogent/kbm.h deleted file mode 100644 index 7eb419c..0000000 --- a/board/cogent/kbm.h +++ /dev/null @@ -1,79 +0,0 @@ -/* keyboard/mouse not implemented yet */ - -extern int cma_kbm_not_implemented; - -/**************** DEFINES for H8542B Keyboard/Mouse Controller ***************/ - -/* - * note the auxillary port is used to control the mouse - */ - -/* 8542B Commands (Sent to the Command Port) */ -#define HT8542_CMD_SET_BYTE 0x60 /* Set the command byte */ -#define HT8542_CMD_GET_BYTE 0x20 /* Get the command byte */ -#define HT8542_CMD_KBD_OBUFF 0xD2 /* Write to HT8542 Kbd Output Buffer */ -#define HT8542_CMD_AUX_OBUFF 0xD3 /* Write to HT8542 Mse Output Buffer */ -#define HT8542_CMD_AUX_WRITE 0xD4 /* Write to Mouse Port */ -#define HT8542_CMD_AUX_OFF 0xA7 /* Disable Mouse Port */ -#define HT8542_CMD_AUX_ON 0xA8 /* Re-Enable Mouse Port */ -#define HT8542_CMD_AUX_TEST 0xA9 /* Test for the presence of a Mouse */ -#define HT8542_CMD_DIAG 0xAA /* Start Diagnostics */ -#define HT8542_CMD_KBD_TEST 0xAB /* Test for presence of a keyboard */ -#define HT8542_CMD_KBD_OFF 0xAD /* Disable Kbd Port (use KBD_DAT_ON) */ -#define HT8542_CMD_KBD_ON 0xAE /* Enable Kbd Port (use KBD_DAT_OFF) */ - -/* HT8542B cmd byte set by KBD_CMD_SET_BYTE and retrieved by KBD_CMD_GET_BYTE */ -#define HT8542_CMD_BYTE_TRANS 0x40 -#define HT8542_CMD_BYTE_AUX_OFF 0x20 /* 1 = mse port disabled, 0 = enabled */ -#define HT8542_CMD_BYTE_KBD_OFF 0x10 /* 1 = kbd port disabled, 0 = enabled */ -#define HT8542_CMD_BYTE_OVER 0x08 /* 1 = override keyboard lock */ -#define HT8542_CMD_BYTE_RES 0x04 /* reserved */ -#define HT8542_CMD_BYTE_AUX_INT 0x02 /* 1 = enable mouse interrupt */ -#define HT8542_CMD_BYTE_KBD_INT 0x01 /* 1 = enable keyboard interrupt */ - -/* Keyboard Commands (Sent to the Data Port) */ -#define KBD_CMD_LED 0xED /* Set Keyboard LEDS with next byte */ -#define KBD_CMD_ECHO 0xEE /* Echo - we get 0xFA, 0xEE back */ -#define KBD_CMD_MODE 0xF0 /* set scan code mode with next byte */ -#define KBD_CMD_ID 0xF2 /* get keyboard/mouse ID */ -#define KBD_CMD_RPT 0xF3 /* Set Repeat Rate and Delay 2nd Byte */ -#define KBD_CMD_ON 0xF4 /* Enable keyboard */ -#define KBD_CMD_OFF 0xF5 /* Disables Scanning, Resets to Def */ -#define KBD_CMD_DEF 0xF6 /* Reverts kbd to default settings */ -#define KBD_CMD_RST 0xFF /* Reset - should get 0xFA, 0xAA back */ - -/* Set LED second bit defines */ -#define KBD_CMD_LED_SCROLL 0x01 /* Set SCROLL LOCK LED on */ -#define KBD_CMD_LED_NUM 0x02 /* Set NUM LOCK LED on */ -#define KBD_CMD_LED_CAPS 0x04 /* Set CAPS LOCK LED on */ - -/* Set Mode second byte defines */ -#define KBD_CMD_MODE_STAT 0x00 /* get current scan code mode */ -#define KBD_CMD_MODE_SCAN1 0x01 /* set mode to scan code 1 */ -#define KBD_CMD_MODE_SCAN2 0x02 /* set mode to scan code 2 */ -#define KBD_CMD_MODE_SCAN3 0x03 /* set mode to scan code 3 */ - -/* Keyboard/Mouse ID Codes */ -#define KBD_CMD_ID_1ST 0xAB /* 1st byte is 0xAB, 2nd is actual ID */ -#define KBD_CMD_ID_KBD 0x83 /* Keyboard */ -#define KBD_CMD_ID_MOUSE 0x00 /* Mouse */ - -/* Keyboard Data Return Defines */ -#define KBD_STAT_OVER 0x00 /* Buffer Overrun */ -#define KBD_STAT_DIAG_OK 0x55 /* Internal Self Test OK */ -#define KBD_STAT_RST_OK 0xAA /* Reset Complete */ -#define KBD_STAT_ECHO 0xEE /* Echo Command Return */ -#define KBD_STAT_BRK 0xF0 /* Prefix for Break Key Code */ -#define KBD_STAT_ACK 0xFA /* Received after all commands */ -#define KBD_STAT_DIAG_FAIL 0xFD /* Internal Self Test Failed */ -#define KBD_STAT_RESEND 0xFE /* Resend Last Command */ - -/* HT8542B Status Register Bit Defines */ -#define HT8542_STAT_OBF 0x01 /* 1 = output buffer is full */ -#define HT8542_STAT_IBF 0x02 /* 1 = input buffer is full */ -#define HT8542_STAT_SYS 0x04 /* system flag - unused */ -#define HT8542_STAT_CMD 0x08 /* 1 = cmd in input buffer, 0 = data */ -#define HT8542_STAT_INH 0x10 /* 1 = Inhibit - unused */ -#define HT8542_STAT_TX 0x20 /* 1 = Transmit Timeout has occured */ -#define HT8542_STAT_RX 0x40 /* 1 = Receive Timeout has occured */ -#define HT8542_STAT_PERR 0x80 /* 1 = Parity Error from Keyboard */ diff --git a/board/cray/L1/L1.h b/board/cray/L1/L1.h deleted file mode 100644 index 42c34dd..0000000 --- a/board/cray/L1/L1.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by CRAY L1, 4MB AMD29F032B flash chip - * - * Start Address Length - * +++++++++++++++++++++++++ 0xFFC0_0000 Start of Flash ----------------- - * | Failsafe Linux Image | (1M) - * +=======================+ 0xFFD0_0000 - * | (Reserved FlashFiles) | (1M) - * +=======================+ 0xFFE0_0000 - * | Failsafe RootFS | (1M) - * +=======================+ 0xFFF0_0000 - * | | - * | U N U S E D | - * | | - * +-----------------------+ 0xFFFD_0000 U-Boot image header (64 bytes) - * | environment settings | (64k) - * +-----------------------+ 0xFFFE_0000 U-Boot image header (64 bytes) - * | U-Boot | 0xFFFE_0040 _start of U-Boot - * | | 0xFFFE_FFFC reset vector - branch to _start - * +++++++++++++++++++++++++ 0xFFFF_FFFF End of Flash ----------------- - *****************************************************************************/ diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S index 44c688d..d4723c7 100644 --- a/board/cray/L1/init.S +++ b/board/cray/L1/init.S @@ -22,8 +22,6 @@ /*-----------------------------------------------------------------------------#include <config.h> */ #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/board/csb272/init.S b/board/csb272/init.S index 5961978..bf1d986 100644 --- a/board/csb272/init.S +++ b/board/csb272/init.S @@ -4,8 +4,6 @@ #include <config.h> #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/board/csb472/init.S b/board/csb472/init.S index 1ebc9ea..7383a70 100644 --- a/board/csb472/init.S +++ b/board/csb472/init.S @@ -4,8 +4,6 @@ #include <config.h> #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/board/esd/common/s1d13806_640_480_8bpp.h b/board/esd/common/s1d13806_640_480_8bpp.h deleted file mode 100644 index ddc0289..0000000 --- a/board/esd/common/s1d13806_640_480_8bpp.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (c) 2000,2001 Epson Research and Development, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * File generated by S1D13806CFG.EXE - * Panel: (active) 640x480 59Hz TFT Single 18-bit (PCLK=CLKI2=25.000MHz) - * Memory: Embedded SDRAM (MCLK=CLKI=49.152MHz) (BUSCLK=33.333MHz) - */ - -static S1D_REGS regs_13806_640_320_16bpp[] = -{ - {0x0001,0x00}, /* Miscellaneous Register */ - {0x01FC,0x00}, /* Display Mode Register */ - {0x0004,0x18}, /* General IO Pins Configuration Register 0 */ - {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ - {0x0008,0x18}, /* General IO Pins Control Register 0 */ - {0x0009,0x00}, /* General IO Pins Control Register 1 */ - {0x0010,0x00}, /* Memory Clock Configuration Register */ - {0x0014,0x02}, /* LCD Pixel Clock Configuration Register */ - {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ - {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ - {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ - {0x0021,0x03}, /* DRAM Refresh Rate Register */ - {0x002A,0x00}, /* DRAM Timings Control Register 0 */ - {0x002B,0x01}, /* DRAM Timings Control Register 1 */ - {0x0020,0x80}, /* Memory Configuration Register */ - {0x0030,0x25}, /* Panel Type Register */ - {0x0031,0x00}, /* MOD Rate Register */ - {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ - {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ - {0x0035,0x00}, /* TFT FPLINE Start Position Register */ - {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ - {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ - {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ - {0x003A,0x24}, /* LCD Vertical Non-Display Period Register */ - {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ - {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ - {0x0040,0x03}, /* LCD Display Mode Register (8bpp) */ - {0x0041,0x00}, /* LCD Miscellaneous Register */ - {0x0042,0x00}, /* LCD Display Start Address Register 0 */ - {0x0043,0x00}, /* LCD Display Start Address Register 1 */ - {0x0044,0x00}, /* LCD Display Start Address Register 2 */ - {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */ - {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ - {0x0048,0x00}, /* LCD Pixel Panning Register */ - {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ - {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ - {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ - {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ - {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ - {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ - {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ - {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ - {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ - {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ - {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ - {0x005B,0x10}, /* TV Output Control Register */ - {0x0060,0x05}, /* CRT/TV Display Mode Register */ - {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ - {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ - {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ - {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */ - {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */ - {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ - {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ - {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ - {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ - {0x0071,0x01}, /* LCD Ink/Cursor Start Address Register */ - {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ - {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ - {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ - {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ - {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ - {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ - {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ - {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ - {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ - {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ - {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ - {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ - {0x0081,0x01}, /* CRT/TV Ink/Cursor Start Address Register */ - {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ - {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ - {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ - {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ - {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ - {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ - {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ - {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ - {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ - {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ - {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ - {0x0100,0x00}, /* BitBlt Control Register 0 */ - {0x0101,0x00}, /* BitBlt Control Register 1 */ - {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ - {0x0103,0x00}, /* BitBlt Operation Register */ - {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ - {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ - {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ - {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ - {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ - {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ - {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ - {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ - {0x0110,0x00}, /* BitBlt Width Register 0 */ - {0x0111,0x00}, /* BitBlt Width Register 1 */ - {0x0112,0x00}, /* BitBlt Height Register 0 */ - {0x0113,0x00}, /* BitBlt Height Register 1 */ - {0x0114,0x00}, /* BitBlt Background Color Register 0 */ - {0x0115,0x00}, /* BitBlt Background Color Register 1 */ - {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ - {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ - {0x01E0,0x00}, /* Look-Up Table Mode Register */ - {0x01E2,0x00}, /* Look-Up Table Address Register */ - {0x01F0,0x10}, /* Power Save Configuration Register */ - {0x01F1,0x00}, /* Power Save Status Register */ - {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ - {0x01FC,0x01}, /* Display Mode Register */ -}; diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index f425105..6c2cf21 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -23,7 +23,6 @@ #include <linux/compiler.h> #include "../../Marvell/include/memory.h" -#include "serial.h" #include "mpsc.h" diff --git a/board/esd/cpci750/serial.h b/board/esd/cpci750/serial.h deleted file mode 100644 index 264e2d2..0000000 --- a/board/esd/cpci750/serial.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus <ingo.assmus@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/etin/debris/speed.h b/board/etin/debris/speed.h deleted file mode 100644 index f1b10bf..0000000 --- a/board/etin/debris/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c index 3081fad..83a4217 100644 --- a/board/evb64260/serial.c +++ b/board/evb64260/serial.c @@ -21,8 +21,6 @@ #include <ns16550.h> #endif -#include "serial.h" - #include "mpsc.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/board/evb64260/serial.h b/board/evb64260/serial.h deleted file mode 100644 index bac9253..0000000 --- a/board/evb64260/serial.h +++ /dev/null @@ -1,63 +0,0 @@ -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/freescale/c29xpcie/Makefile b/board/freescale/c29xpcie/Makefile index 626d48a..818484a 100644 --- a/board/freescale/c29xpcie/Makefile +++ b/board/freescale/c29xpcie/Makefile @@ -3,8 +3,23 @@ # # SPDX-License-Identifier: GPL-2.0+ +MINIMAL= +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_INIT_MINIMAL +MINIMAL=y +endif +endif + +ifdef MINIMAL +obj-y += spl_minimal.o tlb.o law.o +else +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +endif + obj-y += c29xpcie.o obj-y += cpld.o obj-y += ddr.o obj-y += law.o obj-y += tlb.o +endif diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README index 430f0824..3bc396b 100644 --- a/board/freescale/c29xpcie/README +++ b/board/freescale/c29xpcie/README @@ -62,9 +62,9 @@ Build and program u-boot to NOR flash 2. Program u-boot.bin into NOR flash => tftp $loadaddr $uboot - => protect off eff80000 +$filesize - => erase eff80000 +$filesize - => cp.b $loadaddr eff80000 $filesize + => protect off eff40000 +$filesize + => erase eff40000 +$filesize + => cp.b $loadaddr eff40000 $filesize 3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on. @@ -73,9 +73,9 @@ Alternate NOR bank There are four banks in C29XPCIE board, example to change bank booting: 1. Program u-boot.bin into alternate NOR bank => tftp $loadaddr $uboot - => protect off e9f80000 +$filesize - => erase e9f80000 +$filesize - => cp.b $loadaddr e9f80000 $filesize + => protect off e9f40000 +$filesize + => erase e9f40000 +$filesize + => cp.b $loadaddr e9f40000 $filesize 2. Switch to alternate NOR bank => cpld_cmd reset altbank [bank] diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c index 5cbccff..37722da 100644 --- a/board/freescale/c29xpcie/cpld.c +++ b/board/freescale/c29xpcie/cpld.c @@ -89,6 +89,7 @@ static void cpld_dump_regs(void) } #endif +#ifndef CONFIG_SPL_BUILD int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int rc = 0; @@ -129,3 +130,4 @@ U_BOOT_CMD( "cpld_cmd dump - display the CPLD registers\n" #endif ); +#endif diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c new file mode 100644 index 0000000..3cfdb72 --- /dev/null +++ b/board/freescale/c29xpcie/spl.c @@ -0,0 +1,77 @@ +/* Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +ulong get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + console_init_f(); + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + gd->bus_clk / 16 / CONFIG_BAUDRATE); + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); + + /* relocate environment function pointers etc. */ + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; + + i2c_init_all(); + + gd->ram_size = initdram(0); + +#ifdef CONFIG_SPL_NAND_BOOT + puts("TPL\n"); +#else + puts("SPL\n"); +#endif + + nand_boot(); +} diff --git a/board/freescale/c29xpcie/spl_minimal.c b/board/freescale/c29xpcie/spl_minimal.c new file mode 100644 index 0000000..8f96b67 --- /dev/null +++ b/board/freescale/c29xpcie/spl_minimal.c @@ -0,0 +1,63 @@ +/* Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <mpc85xx.h> +#include <asm/io.h> +#include <ns16550.h> +#include <nand.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + gd->bus_clk / 16 / CONFIG_BAUDRATE); + + puts("\nNAND boot...\n"); + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + puts("SPL\n"); + nand_boot(); +} + +void putc(char c) +{ + if (c == '\n') + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); + + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c index 84844ee..c5abed0 100644 --- a/board/freescale/c29xpcie/tlb.c +++ b/board/freescale/c29xpcie/tlb.c @@ -30,6 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), +#ifndef CONFIG_SPL_BUILD SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 1, BOOKE_PAGESZ_64M, 1), @@ -43,13 +44,14 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256K, 1), #endif +#endif SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_64K, 1), SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64K, 1), SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE, @@ -61,7 +63,8 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 7, BOOKE_PAGESZ_256K, 1), -#ifdef CONFIG_SYS_RAMBOOT +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, @@ -71,6 +74,12 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_256M, 1), #endif + +#ifdef CONFIG_SYS_INIT_L2_ADDR + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 12, BOOKE_PAGESZ_256K, 1) +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/common/sdhc_boot.c b/board/freescale/common/sdhc_boot.c index f6e2b2b..022f38b 100644 --- a/board/freescale/common/sdhc_boot.c +++ b/board/freescale/common/sdhc_boot.c @@ -16,6 +16,8 @@ #define ESDHC_BOOT_IMAGE_SIZE 0x48 #define ESDHC_BOOT_IMAGE_ADDR 0x50 +#define ESDHC_DEFAULT_ENVADDR 0x400 + int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr) { u8 *tmp_buf; @@ -39,6 +41,33 @@ int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr) /* Get the code size from offset 0x48 */ code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); +#ifdef CONFIG_ESDHC_HC_BLK_ADDR + /* + * On soc BSC9131, BSC9132: + * In High Capacity SD Cards (> 2 GBytes), the 32-bit source address and + * code length of these soc specify the memory address in block address + * format. Block length is fixed to 512 bytes as per the SD High + * Capacity specification. + */ + u64 tmp; + + if (mmc->high_capacity) { + tmp = (u64)code_offset * blklen; + tmp += code_len * blklen; + } else + tmp = code_offset + code_len; + + if ((tmp + CONFIG_ENV_SIZE > mmc->capacity) || + (tmp > 0xFFFFFFFFU)) + *env_addr = ESDHC_DEFAULT_ENVADDR; + else + *env_addr = tmp; + + free(tmp_buf); + + return 0; +#endif + *env_addr = code_offset + code_len; free(tmp_buf); diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index 158a1b3..cde246d 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -104,9 +104,9 @@ Build and burn u-boot to NOR flash 2. Burn u-boot.bin into NOR flash => tftp $loadaddr $uboot - => protect off eff80000 +$filesize - => erase eff80000 +$filesize - => cp.b $loadaddr eff80000 $filesize + => protect off eff40000 +$filesize + => erase eff40000 +$filesize + => cp.b $loadaddr eff40000 $filesize 3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on. @@ -115,9 +115,9 @@ Alternate NOR bank ================== 1. Burn u-boot.bin into alternate NOR bank => tftp $loadaddr $uboot - => protect off eef80000 +$filesize - => erase eef80000 +$filesize - => cp.b $loadaddr eef80000 $filesize + => protect off eef40000 +$filesize + => erase eef40000 +$filesize + => cp.b $loadaddr eef40000 $filesize 2. Switch to alternate NOR bank => mw.b ffb00009 1 diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB index cf459b3..c5d1419 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PB +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -149,11 +149,11 @@ Steps to program images to flash for different boot mode 1. NOR boot => tftp 1000000 u-boot.bin For bank0 - => pro off all;era eff80000 efffffff;cp.b 1000000 eff80000 $filesize + => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board For bank1 - => pro off all;era eef80000 eeffffff;cp.b 1000000 eef80000 $filesize + => pro off all;era eef40000 eeffffff;cp.b 1000000 eef40000 $filesize set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board 2. NAND boot diff --git a/board/freescale/p1023rds/README b/board/freescale/p1023rds/README index 685f5da..d382551 100644 --- a/board/freescale/p1023rds/README +++ b/board/freescale/p1023rds/README @@ -62,8 +62,8 @@ To program the image in the boot flash bank: NOR flash boot: => tftp 1000000 u-boot.bin => protect off all - => erase eff80000 efffffff - => cp.b 1000000 eff80000 80000 + => erase eff40000 efffffff + => cp.b 1000000 eff40000 c0000 NAND flash boot: => tftp 1000000 u-boot-nand.bin diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README index cb664a5..cd66e58 100644 --- a/board/freescale/p1_p2_rdb/README +++ b/board/freescale/p1_p2_rdb/README @@ -20,8 +20,8 @@ Memory Map 0xef00_0000 - 0xef7f_ffff Alternate bank 8MB 0xe800_0000 - 0xefff_ffff Boot bank 8MB -0xef78_0000 - 0xef7f_ffff Alternate u-boot address 512KB -0xeff8_0000 - 0xefff_ffff Boot u-boot address 512KB +0xef74_0000 - 0xef7f_ffff Alternate u-boot address 768KB +0xeff4_0000 - 0xefff_ffff Boot u-boot address 768KB Switch settings to boot from the NOR flash banks ------------------------------------------------ @@ -33,16 +33,16 @@ Flashing Images To place a new u-boot image in the alternate flash bank and then boot with that new image temporarily, use this: tftp 1000000 u-boot.bin - erase ef780000 ef7fffff - cp.b 1000000 ef780000 80000 + erase ef740000 ef7fffff + cp.b 1000000 ef740000 c0000 Now to boot from the alternate bank change the SW4[8] from 0 to 1. To program the image in the boot flash bank: tftp 1000000 u-boot.bin protect off all - erase eff80000 ffffffff - cp.b 1000000 eff80000 80000 + erase eff40000 ffffffff + cp.b 1000000 eff40000 c0000 Using the Device Tree Source File --------------------------------- diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README index 292d0d3..9b5539f 100644 --- a/board/freescale/p2041rdb/README +++ b/board/freescale/p2041rdb/README @@ -18,8 +18,8 @@ Boot from NOR flash 2. Program image => tftp 1000000 u-boot.bin => protect off all - => erase eff80000 efffffff - => cp.b 1000000 eff80000 80000 + => erase eff40000 efffffff + => cp.b 1000000 eff40000 c0000 3. Program RCW => tftp 1000000 rcw.bin @@ -30,8 +30,8 @@ Boot from NOR flash 4. Program FMAN Firmware ucode => tftp 1000000 ucode.bin => protect off all - => erase ef000000 ef0fffff - => cp.b 1000000 ef000000 2000 + => erase eff00000 eff3ffff + => cp.b 1000000 eff00000 2000 5. Change DIP-switch SW1[1-5] = 10110 @@ -50,11 +50,11 @@ Boot from SDCard 3. Program the PBL image to SDCard => tftp 1000000 pbl_sd.bin => mmcinfo - => mmc write 1000000 8 441 + => mmc write 1000000 8 672 4. Program FMAN Firmware ucode => tftp 1000000 ucode.bin - => mmc write 1000000 46a 10 + => mmc write 1000000 690 10 5. Change DIP-switch SW1[1-5] = 01100 diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile index 93af9eb..c7470d7 100644 --- a/board/freescale/t1040qds/Makefile +++ b/board/freescale/t1040qds/Makefile @@ -9,3 +9,4 @@ obj-y += ddr.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o +obj-y += eth.o diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README index f8b53b4..8160ca0 100644 --- a/board/freescale/t1040qds/README +++ b/board/freescale/t1040qds/README @@ -118,17 +118,17 @@ Start Address End Address Description Size NOR Flash memory Map on T1040QDS -------------------------------- Start End Definition Size -0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB -0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB -0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB -0xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB -0xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t1040qds/ddr.h b/board/freescale/t1040qds/ddr.h index 8ee206e..afa72af 100644 --- a/board/freescale/t1040qds/ddr.h +++ b/board/freescale/t1040qds/ddr.h @@ -31,16 +31,18 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {2, 833, 4, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0}, + {2, 833, 0, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0}, + {2, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0}, + {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0}, + {2, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0}, + {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0}, + {1, 833, 4, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0}, + {1, 833, 0, 4, 6, 0x06060607, 0x08080807, 0xff, 2, 0}, + {1, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0}, + {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09, 0xff, 2, 0}, + {1, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0}, + {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A, 0xff, 2, 0}, {} }; diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c new file mode 100644 index 0000000..3077b4a --- /dev/null +++ b/board/freescale/t1040qds/eth.c @@ -0,0 +1,492 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * The RGMII PHYs are provided by the two on-board PHY connected to + * dTSEC instances 4 and 5. The SGMII PHYs are provided by one on-board + * PHY or by the standard four-port SGMII riser card (VSC). + */ + +#include <common.h> +#include <netdev.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" +#include "../common/qixis.h" + +#include "t1040qds_qixis.h" + +#ifdef CONFIG_FMAN_ENET + /* - In T1040 there are only 8 SERDES lanes, spread across 2 SERDES banks. + * Bank 1 -> Lanes A, B, C, D + * Bank 2 -> Lanes E, F, G, H + */ + + /* Mapping of 8 SERDES lanes to T1040 QDS board slots. A value of '0' here + * means that the mapping must be determined dynamically, or that the lane + * maps to something other than a board slot. + */ +static u8 lane_to_slot[] = { + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs + * housed. + */ +static int riser_phy_addr[] = { + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, +}; + +/* Slot2 does not have EMI connections */ +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII0 0 +#define EMI1_RGMII1 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT6 6 +#define EMI1_SLOT7 7 +#define EMI2 8 + +static int mdio_mux[NUM_FM_PORTS]; + +static const char * const mdio_names[] = { + "T1040_QDS_MDIO0", + "T1040_QDS_MDIO1", + "T1040_QDS_MDIO2", + "T1040_QDS_MDIO3", + "T1040_QDS_MDIO4", + "T1040_QDS_MDIO5", + "T1040_QDS_MDIO6", + "T1040_QDS_MDIO7", +}; + +struct t1040_qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static const char *t1040_qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = t1040_qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +static void t1040_qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if (muxval <= 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int t1040_qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct t1040_qds_mdio *priv = bus->priv; + + t1040_qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int t1040_qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct t1040_qds_mdio *priv = bus->priv; + + t1040_qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int t1040_qds_mdio_reset(struct mii_dev *bus) +{ + struct t1040_qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int t1040_qds_mdio_init(char *realbusname, u8 muxval) +{ + struct t1040_qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate t1040_qds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate t1040_qds private data\n"); + free(bus); + return -1; + } + + bus->read = t1040_qds_mdio_read; + bus->write = t1040_qds_mdio_write; + bus->reset = t1040_qds_mdio_reset; + sprintf(bus->name, t1040_qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +/* + * Initialize the lane_to_slot[] array. + * + * On the T1040QDS board the mapping is controlled by ?? register. + */ +static void initialize_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + int serdes1_prtcl = (in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL) + >> FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + QIXIS_WRITE(cms[0], 0x07); + + switch (serdes1_prtcl) { + case 0x60: + case 0x66: + case 0x67: + case 0x69: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + break; + case 0x86: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + break; + case 0x87: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[7] = 7; + break; + case 0x89: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[7] = 7; + break; + case 0x8d: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0x8F: + case 0x85: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xA5: + lane_to_slot[1] = 7; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xA7: + lane_to_slot[1] = 7; + lane_to_slot[7] = 7; + break; + case 0xAA: + lane_to_slot[1] = 7; + lane_to_slot[6] = 7; + lane_to_slot[7] = 7; + break; + case 0x40: + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + break; + default: + printf("qds: Fman: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} + +/* + * Given the following ... + * + * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' + * compatible string and 'addr' physical address) + * + * 2) An Fman port + * + * ... update the phy-handle property of the Ethernet node to point to the + * right PHY. This assumes that we already know the PHY for each port. + * + * The offset of the Fman Ethernet node is also passed in for convenience, but + * it is not used, and we recalculate the offset anyway. + * + * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. + * Inside the Fman, "ports" are things that connect to MACs. We only call them + * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs + * and ports are the same thing. + * + */ +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + phy_interface_t intf = fm_info_get_enet_if(port); + char phy[16]; + + /* The RGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_RGMII) { + sprintf(phy, "rgmii_phy%u", port == FM1_DTSEC4 ? 1 : 2); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + + /* The SGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_SGMII) { + int lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1 + + port); + u8 slot; + if (lane < 0) + return; + slot = lane_to_slot[lane]; + if (slot) { + /* Slot housing a SGMII riser card */ + sprintf(phy, "phy_s%x_%02x", slot, + (fm_info_get_phy_address(port - FM1_DTSEC1)- + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + 1)); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + } +} + +void fdt_fixup_board_enet(void *fdt) +{ + int i, lane, idx; + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + idx = i - FM1_DTSEC1; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + + switch (mdio_mux[i]) { + case EMI1_SLOT3: + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case EMI1_SLOT5: + fdt_status_okay_by_alias(fdt, "emi1_slot5"); + break; + case EMI1_SLOT6: + fdt_status_okay_by_alias(fdt, "emi1_slot6"); + break; + case EMI1_SLOT7: + fdt_status_okay_by_alias(fdt, "emi1_slot7"); + break; + } + break; + case PHY_INTERFACE_MODE_RGMII: + if (i == FM1_DTSEC4) + fdt_status_okay_by_alias(fdt, "emi1_rgmii0"); + + if (i == FM1_DTSEC5) + fdt_status_okay_by_alias(fdt, "emi1_rgmii1"); + break; + default: + break; + } + } +} +#endif /* #ifdef CONFIG_FMAN_ENET */ + +static void set_brdcfg9_for_gtx_clk(void) +{ + u8 brdcfg9; + brdcfg9 = QIXIS_READ(brdcfg[9]); + brdcfg9 |= (1 << 5); + QIXIS_WRITE(brdcfg[9], brdcfg9); +} + +void t1040_handle_phy_interface_sgmii(int i) +{ + int lane, idx, slot; + idx = i - FM1_DTSEC1; + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + + if (lane < 0) + return; + slot = lane_to_slot[lane]; + + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 3: + if (FM1_DTSEC4 == i) + fm_info_set_phy_address(i, riser_phy_addr[0]); + if (FM1_DTSEC5 == i) + fm_info_set_phy_address(i, riser_phy_addr[1]); + + mdio_mux[i] = EMI1_SLOT3; + + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 5: + /* Slot housing a SGMII riser card? */ + fm_info_set_phy_address(i, riser_phy_addr[0]); + mdio_mux[i] = EMI1_SLOT5; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 6: + /* Slot housing a SGMII riser card? */ + fm_info_set_phy_address(i, riser_phy_addr[0]); + mdio_mux[i] = EMI1_SLOT6; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 7: + if (FM1_DTSEC1 == i) + fm_info_set_phy_address(i, riser_phy_addr[0]); + if (FM1_DTSEC2 == i) + fm_info_set_phy_address(i, riser_phy_addr[1]); + if (FM1_DTSEC3 == i) + fm_info_set_phy_address(i, riser_phy_addr[2]); + + mdio_mux[i] = EMI1_SLOT7; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); +} +void t1040_handle_phy_interface_rgmii(int i) +{ + fm_info_set_phy_address(i, i == FM1_DTSEC5 ? + CONFIG_SYS_FM1_DTSEC5_PHY_ADDR : + CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + mdio_mux[i] = (i == FM1_DTSEC5) ? EMI1_RGMII1 : + EMI1_RGMII0; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); +} + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + + printf("Initializing Fman\n"); + set_brdcfg9_for_gtx_clk(); + + initialize_lane_to_slot(); + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII0); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); + + /* + * Program on board RGMII PHY addresses. If the SGMII Riser + * card used, we'll override the PHY address later. For any DTSEC that + * is RGMII, we'll also override its PHY address later. We assume that + * DTSEC4 and DTSEC5 are used for RGMII. + */ + fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR); + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_QSGMII: + break; + case PHY_INTERFACE_MODE_SGMII: + t1040_handle_phy_interface_sgmii(i); + break; + + case PHY_INTERFACE_MODE_RGMII: + /* Only DTSEC4 and DTSEC5 can be routed to RGMII */ + t1040_handle_phy_interface_rgmii(i); + break; + default: + break; + } + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index de3ea5c..3dec447 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -223,6 +223,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); #endif } diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index 76c0c94..e51fb7a 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -7,6 +7,7 @@ obj-y += t104xrdb.o obj-y += ddr.o +obj-y += eth.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index 2cd8219..1da52bb 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -161,17 +161,17 @@ Start Address End Address Description Size NOR Flash memory Map --------------------- Start End Definition Size -0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB -0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB -0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB -0xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB -0xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c new file mode 100644 index 0000000..0188fd4 --- /dev/null +++ b/board/freescale/t104xrdb/eth.c @@ -0,0 +1,72 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + int phy_addr = 0; + printf("Initializing Fman\n"); + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* + * Program on board RGMII, SGMII PHY addresses. + */ + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { +#ifdef CONFIG_T1040RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1040RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); +#endif + case PHY_INTERFACE_MODE_RGMII: + if (FM1_DTSEC4 == i) + phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; + if (FM1_DTSEC5 == i) + phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; + fm_info_set_phy_address(i, phy_addr); + break; + case PHY_INTERFACE_MODE_QSGMII: + fm_info_set_phy_address(i, 0); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/t2080qds/ddr.c b/board/freescale/t2080qds/ddr.c index 5db5d21..ed1334d 100644 --- a/board/freescale/t2080qds/ddr.c +++ b/board/freescale/t2080qds/ddr.c @@ -24,7 +24,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; ulong ddr_freq; - if (ctrl_num > 2) { + if (ctrl_num > 1) { printf("Not supported controller number %d\n", ctrl_num); return; } @@ -40,8 +40,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, else pbsp = udimms[0]; - - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr * freqency and n_banks specified in board_specific_parameters table. */ ddr_freq = get_ddr_freq(0) / 1000000; @@ -49,14 +48,10 @@ void fsl_ddr_board_options(memctl_options_t *popts, if (pbsp->n_ranks == pdimm->n_ranks && (pdimm->rank_density >> 30) >= pbsp->rank_gb) { if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; popts->clk_adjust = pbsp->clk_adjust; popts->wrlvl_start = pbsp->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -69,13 +64,10 @@ void fsl_ddr_board_options(memctl_options_t *popts, printf("for data rate %lu MT/s\n", ddr_freq); printf("Trying to use the highest speed (%u) parameters\n", pbsp_highest->datarate_mhz_high); - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/t2080qds/ddr.h b/board/freescale/t2080qds/ddr.h index 964eaad..9fc879a 100644 --- a/board/freescale/t2080qds/ddr.h +++ b/board/freescale/t2080qds/ddr.h @@ -14,9 +14,6 @@ struct board_specific_parameters { u32 wrlvl_start; u32 wrlvl_ctl_2; u32 wrlvl_ctl_3; - u32 cpo; - u32 write_data_delay; - u32 force_2t; }; /* @@ -28,58 +25,48 @@ struct board_specific_parameters { static const struct board_specific_parameters udimm0[] = { /* * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1800, 2, 5, 6, 0x06070709, 0x110a0b08, 0xff, 2, 0}, - {1, 1866, 2, 4, 6, 0x06060708, 0x09090a07, 0xff, 2, 0}, - {1, 1900, 2, 4, 6, 0x06060708, 0x09090a07, 0xff, 2, 0}, - {1, 2000, 2, 4, 8, 0x090a0b0d, 0x0e0f110b, 0xff, 2, 0}, - {1, 2133, 2, 4, 8, 0x090a0b0d, 0x0e0f110b, 0xff, 2, 0}, + {2, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, + {2, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, + {2, 1600, 2, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, + {2, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, + {2, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c}, + {2, 2140, 2, 4, 8, 0x090a0b0d, 0x0e0f110b}, + {1, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, + {1, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, + {1, 1600, 2, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, + {1, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 2, 5, 9, 0x0a0b0c0e, 0x0f10120c}, + {1, 2140, 2, 4, 8, 0x090a0b0d, 0x0e0f110b}, {} }; static const struct board_specific_parameters rdimm0[] = { /* * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, - {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, - {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, - {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, - {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, - {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, - {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, - {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, - {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + /* TODO: need tuning these parameters if RDIMM is used */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07}, {} }; -/* - * The three slots have slightly different timing. The center values are good - * for all slots. We use identical speed tables for them. In future use, if - * DIMMs require separated tables, make more entries as needed. - */ static const struct board_specific_parameters *udimms[] = { udimm0, }; -/* - * The three slots have slightly different timing. See comments above. - */ static const struct board_specific_parameters *rdimms[] = { rdimm0, }; - - #endif diff --git a/board/freescale/t2080qds/eth_t2080qds.c b/board/freescale/t2080qds/eth_t2080qds.c index 3613f93..3e4ab8f 100644 --- a/board/freescale/t2080qds/eth_t2080qds.c +++ b/board/freescale/t2080qds/eth_t2080qds.c @@ -371,9 +371,11 @@ int board_eth_init(bd_t *bis) break; case 0x6c: case 0x6d: + fm_info_set_phy_address(FM1_10GEC1, 4); + fm_info_set_phy_address(FM1_10GEC2, 5); /* SGMII in Slot3 */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); break; case 0x71: /* SGMII in Slot3 */ @@ -418,7 +420,6 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); break; default: - puts("Invalid SerDes1 protocol for T2080QDS\n"); break; } @@ -448,7 +449,12 @@ int board_eth_init(bd_t *bis) fm_info_set_mdio(i, mii_dev_for_muxval( mdio_mux[i])); break; - }; + case 3: + mdio_mux[i] = EMI1_SLOT3; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + } break; case PHY_INTERFACE_MODE_RGMII: if (i == FM1_DTSEC3) diff --git a/board/freescale/t2080qds/t2080qds.c b/board/freescale/t2080qds/t2080qds.c index cac32fe..4fe8ccb 100644 --- a/board/freescale/t2080qds/t2080qds.c +++ b/board/freescale/t2080qds/t2080qds.c @@ -40,6 +40,11 @@ int checkboard(void) printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4); printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1); +#ifdef CONFIG_SDCARD + puts("SD/MMC\n"); +#elif CONFIG_SPIFLASH + puts("SPI\n"); +#else sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -51,6 +56,7 @@ int checkboard(void) puts("NAND\n"); else printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); +#endif printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver), qixis_read_tag(buf), (int)qixis_read_minor()); @@ -97,13 +103,25 @@ int brd_mux_lane_to_slot(void) /* SerDes1 is not enabled */ break; case 0x1c: - case 0x95: case 0xa2: - case 0x94: /* SD1(A:D) => SLOT3 SGMII * SD1(G:H) => SLOT1 SGMII */ - QIXIS_WRITE(brdcfg[12], 0x58); + QIXIS_WRITE(brdcfg[12], 0x1a); + break; + case 0x94: + case 0x95: + /* SD1(A:B) => SLOT3 SGMII@1.25bps + * SD1(C:D) => SFP Module, SGMII@3.125bps + * SD1(E:H) => SLOT1 SGMII@1.25bps + */ + case 0x96: + /* SD1(A:B) => SLOT3 SGMII@1.25bps + * SD1(C) => SFP Module, SGMII@3.125bps + * SD1(D) => SFP Module, SGMII@1.25bps + * SD1(E:H) => SLOT1 PCIe4 x4 + */ + QIXIS_WRITE(brdcfg[12], 0x3a); break; case 0x51: /* SD1(A:D) => SLOT3 XAUI @@ -134,6 +152,34 @@ int brd_mux_lane_to_slot(void) */ QIXIS_WRITE(brdcfg[12], 0xda); break; + case 0x6e: + /* SD1(A:B) => SFP Module, XFI + * SD1(C:D) => SLOT3 SGMII + * SD1(E:F) => SLOT1 PCIe4 x2 + * SD1(G:H) => SLOT2 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0xd9); + break; + case 0xda: + /* SD1(A:H) => SLOT3 PCIe3 x8 + */ + QIXIS_WRITE(brdcfg[12], 0x0); + break; + case 0xc8: + /* SD1(A) => SLOT3 PCIe3 x1 + * SD1(B) => SFP Module, SGMII@1.25bps + * SD1(C:D) => SFP Module, SGMII@3.125bps + * SD1(E:F) => SLOT1 PCIe4 x2 + * SD1(G:H) => SLOT2 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x79); + break; + case 0xab: + /* SD1(A:D) => SLOT3 PCIe3 x4 + * SD1(E:H) => SLOT1 PCIe4 x4 + */ + QIXIS_WRITE(brdcfg[12], 0x1a); + break; default: printf("WARNING: unsupported for SerDes1 Protocol %d\n", srds_prtcl_s1); @@ -147,7 +193,7 @@ int brd_mux_lane_to_slot(void) case 0x01: case 0x02: /* SD2(A:H) => SLOT4 PCIe1 */ - QIXIS_WRITE(brdcfg[13], 0x20); + QIXIS_WRITE(brdcfg[13], 0x10); break; case 0x15: case 0x16: @@ -164,7 +210,7 @@ int brd_mux_lane_to_slot(void) * SD2(E:F) => SLOT5 Aurora * SD2(G:H) => SATA1,SATA2 */ - QIXIS_WRITE(brdcfg[13], 0x70); + QIXIS_WRITE(brdcfg[13], 0x78); break; case 0x1f: /* @@ -180,7 +226,15 @@ int brd_mux_lane_to_slot(void) * SD2(A:D) => SLOT4 SRIO2 * SD2(E:H) => SLOT5 SRIO1 */ - QIXIS_WRITE(brdcfg[13], 0x50); + QIXIS_WRITE(brdcfg[13], 0xa0); + break; + case 0x36: + /* + * SD2(A:D) => SLOT4 SRIO2 + * SD2(E:F) => Aurora + * SD2(G:H) => SATA1,SATA2 + */ + QIXIS_WRITE(brdcfg[13], 0x78); break; default: printf("WARNING: unsupported for SerDes2 Protocol %d\n", diff --git a/board/genietv/genietv.h b/board/genietv/genietv.h deleted file mode 100644 index 7c95b56..0000000 --- a/board/genietv/genietv.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * The GENIETV is using the following physical memorymap (copied from - * the FADS configuration): - * - * ff020000 -> ff02ffff : pcmcia - * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxROM - * ff000000 -> ff00ffff : IMAP internal in the cpu - * 02800000 -> 0287ffff : flash connected to CS0 - * 00000000 -> nnnnnnnn : sdram setup by U-Boot - * - * CS pins are connected as follows: - * - * CS0 -512Kb boot flash - * CS1 - SDRAM #1 - * CS2 - SDRAM #2 - * CS3 - Flash #1 - * CS4 - Flash #2 - * CS5 - LON (if present) - * CS6 - PCMCIA #1 - * CS7 - PCMCIA #2 - * - * Ports are configured as follows: - * - * PA7 - SDRAM banks enable - */ diff --git a/board/hidden_dragon/speed.h b/board/hidden_dragon/speed.h deleted file mode 100644 index f1b10bf..0000000 --- a/board/hidden_dragon/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ diff --git a/board/inka4x0/hyb25d512160bf-5.h b/board/inka4x0/hyb25d512160bf-5.h deleted file mode 100644 index f16f450..0000000 --- a/board/inka4x0/hyb25d512160bf-5.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Semihalf - * Written by Marian Balakowicz <m8@semihalf.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile index 3e69ee2..c57ca08 100644 --- a/board/keymile/kmp204x/Makefile +++ b/board/keymile/kmp204x/Makefile @@ -8,5 +8,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o \ +obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o qrio.o \ ../common/common.o ../common/ivm.o diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index f02642a..95a19cd 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -33,12 +33,51 @@ int checkboard(void) return 0; } -/* TODO: implement the I2C deblocking function */ -int i2c_make_abort(void) +/* I2C deblocking uses the algorithm defined in board/keymile/common/common.c + * 2 dedicated QRIO GPIOs externally pull the SCL and SDA lines + * For I2C only the low state is activly driven and high state is pulled-up + * by a resistor. Therefore the deblock GPIOs are used + * -> as an active output to drive a low state + * -> as an open-drain input to have a pulled-up high state + */ + +/* QRIO GPIOs used for deblocking */ +#define DEBLOCK_PORT1 GPIO_A +#define DEBLOCK_SCL1 20 +#define DEBLOCK_SDA1 21 + +/* By default deblock GPIOs are floating */ +static void i2c_deblock_gpio_cfg(void) +{ + /* set I2C bus 1 deblocking GPIOs input, but 0 value for open drain */ + qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SCL1); + qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SDA1); + + qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, 0); + qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, 0); +} + +void set_sda(int state) +{ + qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, state); +} + +void set_scl(int state) +{ + qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, state); +} + +int get_sda(void) +{ + return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1); +} + +int get_scl(void) { - return 1; + return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1); } + #define ZL30158_RST 8 #define ZL30343_RST 9 @@ -62,6 +101,7 @@ int board_early_init_f(void) int board_early_init_r(void) { + int ret = 0; /* Flush d-cache and invalidate i-cache of any FLASH data */ flush_dcache(); invalidate_icache(); @@ -69,7 +109,11 @@ int board_early_init_r(void) set_liodns(); setup_portals(); - return 0; + ret = trigger_fpga_config(); + if (ret) + printf("error triggering PCIe FPGA config\n"); + + return ret; } unsigned long get_board_sys_clk(unsigned long dummy) @@ -77,80 +121,12 @@ unsigned long get_board_sys_clk(unsigned long dummy) return 66666666; } -#define WDMASK_OFF 0x16 - -static void qrio_wdmask(u8 bit, bool wden) -{ - u16 wdmask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - wdmask = in_be16(qrio_base + WDMASK_OFF); - - if (wden) - wdmask |= (1 << bit); - else - wdmask &= ~(1 << bit); - - out_be16(qrio_base + WDMASK_OFF, wdmask); -} - -#define PRST_OFF 0x1a - -void qrio_prst(u8 bit, bool en, bool wden) -{ - u16 prst; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - qrio_wdmask(bit, wden); - - prst = in_be16(qrio_base + PRST_OFF); - - if (en) - prst &= ~(1 << bit); - else - prst |= (1 << bit); - - out_be16(qrio_base + PRST_OFF, prst); -} - -#define PRSTCFG_OFF 0x1c - -void qrio_prstcfg(u8 bit, u8 mode) -{ - u32 prstcfg; - u8 i; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - prstcfg = in_be32(qrio_base + PRSTCFG_OFF); - - for (i = 0; i < 2; i++) { - if (mode & (1<<i)) - set_bit(2*bit+i, &prstcfg); - else - clear_bit(2*bit+i, &prstcfg); - } - - out_be32(qrio_base + PRSTCFG_OFF, prstcfg); -} - - -#define BOOTCOUNT_OFF 0x12 - -void bootcount_store(ulong counter) +int misc_init_f(void) { - u8 val; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - val = (counter <= 255) ? (u8)counter : 255; - out_8(qrio_base + BOOTCOUNT_OFF, val); -} + /* configure QRIO pis for i2c deblocking */ + i2c_deblock_gpio_cfg(); -ulong bootcount_load(void) -{ - u8 val; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - val = in_8(qrio_base + BOOTCOUNT_OFF); - return val; + return 0; } #define NUM_SRDS_BANKS 2 diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h index b6ba672..0267596 100644 --- a/board/keymile/kmp204x/kmp204x.h +++ b/board/keymile/kmp204x/kmp204x.h @@ -5,6 +5,16 @@ * SPDX-License-Identifier: GPL-2.0+ */ +/* QRIO GPIO ports */ +#define GPIO_A 0x40 +#define GPIO_B 0x60 + +int qrio_get_gpio(u8 port_off, u8 gpio_nr); +void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val); +void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value); +void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value); +void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr); + #define PRSTCFG_POWUP_UNIT_CORE_RST 0x0 #define PRSTCFG_POWUP_UNIT_RST 0x1 #define PRSTCFG_POWUP_RST 0x3 diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg index f38dcf9..9af8bd5 100644 --- a/board/keymile/kmp204x/pbi.cfg +++ b/board/keymile/kmp204x/pbi.cfg @@ -8,6 +8,16 @@ # #PBI commands +#Workaround for A-006559 needed for rev 2.0 of P2041 silicon +#Freescale's errarta sheet suggests it may be done with PBI +09000010 00000000 +09000014 00000000 +09000018 81d00000 +09021008 0000f000 +09021028 0000f000 +09021048 0000f000 +09021068 0000f000 +09000018 00000000 #Initialize CPC1 as 1MB SRAM 09010000 00200400 09138000 00000000 diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c index ec20c8a..a484eb5 100644 --- a/board/keymile/kmp204x/pci.c +++ b/board/keymile/kmp204x/pci.c @@ -14,18 +14,103 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/fsl_serdes.h> +#include <asm/errno.h> #include "kmp204x.h" +#define PROM_SEL_L 11 +/* control the PROM_SEL_L signal*/ +static void toggle_fpga_eeprom_bus(bool cpu_own) +{ + qrio_gpio_direction_output(GPIO_A, PROM_SEL_L, !cpu_own); +} + +#define CONF_SEL_L 10 +#define FPGA_PROG_L 19 +#define FPGA_DONE 18 +#define FPGA_INIT_L 17 + +int trigger_fpga_config(void) +{ + int ret = 0, init_l; + /* approx 10ms */ + u32 timeout = 10000; + + /* make sure the FPGA_can access the EEPROM */ + toggle_fpga_eeprom_bus(false); + + /* assert CONF_SEL_L to be able to drive FPGA_PROG_L */ + qrio_gpio_direction_output(GPIO_A, CONF_SEL_L, 0); + + /* trigger the config start */ + qrio_gpio_direction_output(GPIO_A, FPGA_PROG_L, 0); + + /* small delay for INIT_L line */ + udelay(10); + + /* wait for FPGA_INIT to be asserted */ + do { + init_l = qrio_get_gpio(GPIO_A, FPGA_INIT_L); + if (timeout-- == 0) { + printf("FPGA_INIT timeout\n"); + ret = -EFAULT; + break; + } + udelay(10); + } while (init_l); + + /* deassert FPGA_PROG, config should start */ + qrio_set_gpio(GPIO_A, FPGA_PROG_L, 1); + + return ret; +} + +/* poll the FPGA_DONE signal and give the EEPROM back to the QorIQ */ +static int wait_for_fpga_config(void) +{ + int ret = 0, done; + /* approx 5 s */ + u32 timeout = 500000; + + printf("PCIe FPGA config:"); + do { + done = qrio_get_gpio(GPIO_A, FPGA_DONE); + if (timeout-- == 0) { + printf(" FPGA_DONE timeout\n"); + ret = -EFAULT; + goto err_out; + } + udelay(10); + } while (!done); + + printf(" done\n"); + +err_out: + /* deactive CONF_SEL and give the CPU conf EEPROM access */ + qrio_set_gpio(GPIO_A, CONF_SEL_L, 1); + toggle_fpga_eeprom_bus(true); + + return ret; +} + #define PCIE_SW_RST 14 +#define PEXHC_SW_RST 13 #define HOOPER_SW_RST 12 void pci_init_board(void) { + /* first wait for the PCIe FPGA to be configured + * it has been triggered earlier in board_early_init_r */ + int ret = wait_for_fpga_config(); + if (ret) + printf("error finishing PCIe FPGA config\n"); + qrio_prst(PCIE_SW_RST, false, false); + qrio_prst(PEXHC_SW_RST, false, false); qrio_prst(HOOPER_SW_RST, false, false); /* Hooper is not direcly PCIe capable */ mdelay(50); + fsl_pcie_init_board(0); } diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c new file mode 100644 index 0000000..49f9aa2 --- /dev/null +++ b/board/keymile/kmp204x/qrio.c @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2013 Keymile AG + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include "../common/common.h" +#include "kmp204x.h" + +/* QRIO GPIO register offsets */ +#define DIRECT_OFF 0x18 +#define GPRT_OFF 0x1c + +int qrio_get_gpio(u8 port_off, u8 gpio_nr) +{ + u32 gprt; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + gprt = in_be32(qrio_base + port_off + GPRT_OFF); + + return (gprt >> gpio_nr) & 1U; +} + +void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value) +{ + u32 gprt, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + gprt = in_be32(qrio_base + port_off + GPRT_OFF); + if (value) + gprt |= mask; + else + gprt &= ~mask; + + out_be32(qrio_base + port_off + GPRT_OFF, gprt); +} + +void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + direct |= mask; + out_be32(qrio_base + port_off + DIRECT_OFF, direct); + + qrio_set_gpio(port_off, gpio_nr, value); +} + +void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + direct &= ~mask; + out_be32(qrio_base + port_off + DIRECT_OFF, direct); +} + +void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + if (val == 0) + /* set to output -> GPIO drives low */ + direct |= mask; + else + /* set to input -> GPIO floating */ + direct &= ~mask; + + out_be32(qrio_base + port_off + DIRECT_OFF, direct); +} + +#define WDMASK_OFF 0x16 + +static void qrio_wdmask(u8 bit, bool wden) +{ + u16 wdmask; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + wdmask = in_be16(qrio_base + WDMASK_OFF); + + if (wden) + wdmask |= (1 << bit); + else + wdmask &= ~(1 << bit); + + out_be16(qrio_base + WDMASK_OFF, wdmask); +} + +#define PRST_OFF 0x1a + +void qrio_prst(u8 bit, bool en, bool wden) +{ + u16 prst; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + qrio_wdmask(bit, wden); + + prst = in_be16(qrio_base + PRST_OFF); + + if (en) + prst &= ~(1 << bit); + else + prst |= (1 << bit); + + out_be16(qrio_base + PRST_OFF, prst); +} + +#define PRSTCFG_OFF 0x1c + +void qrio_prstcfg(u8 bit, u8 mode) +{ + u32 prstcfg; + u8 i; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + prstcfg = in_be32(qrio_base + PRSTCFG_OFF); + + for (i = 0; i < 2; i++) { + if (mode & (1<<i)) + set_bit(2*bit+i, &prstcfg); + else + clear_bit(2*bit+i, &prstcfg); + } + + out_be32(qrio_base + PRSTCFG_OFF, prstcfg); +} diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg index f2b7fe3..2d4c48c 100644 --- a/board/keymile/kmp204x/rcw_kmp204x.cfg +++ b/board/keymile/kmp204x/rcw_kmp204x.cfg @@ -7,5 +7,5 @@ aa55aa55 010e0100 #64 bytes RCW data 14600000 00000000 28200000 00000000 148E70CF CFC02000 58000000 41000000 -00000000 00000000 00000000 F4428002 +00000000 00000000 00000000 F0428002 00000000 00000000 00000000 00000000 diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index 642f17c..2ea2e29 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -19,7 +19,6 @@ * Bank 6 - not used * Bank 7 - PLD Register *-----------------------------------------------------------------------------*/ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <configs/MIP405.h> #include <ppc_asm.tmpl> diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S index 95fed34..292393e 100644 --- a/board/mpl/pip405/init.S +++ b/board/mpl/pip405/init.S @@ -19,7 +19,6 @@ * Bank 6 - used to switch on the 12V for the Multipurpose socket * Bank 7 - Config Register *-----------------------------------------------------------------------------*/ -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <configs/PIP405.h> #include <ppc_asm.tmpl> diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 1972527..e650fed 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -48,17 +48,6 @@ const struct tegra_sysinfo sysinfo = { CONFIG_TEGRA_BOARD_STRING }; -#ifndef CONFIG_SPL_BUILD -/* - * Routine: timer_init - * Description: init the timestamp and lastinc value - */ -int timer_init(void) -{ - return 0; -} -#endif - void __pin_mux_usb(void) { } diff --git a/board/prodrive/p3mx/ppc_error_no.h b/board/prodrive/p3mx/ppc_error_no.h deleted file mode 100644 index 58a68b5..0000000 --- a/board/prodrive/p3mx/ppc_error_no.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2003 - * Ingo Assmus <ingo.assmus@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus - */ -#ifndef _MV_PPC_ERRNO_H -#define _MV_PPC_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c index 89040a8..5b7b989 100644 --- a/board/prodrive/p3mx/serial.c +++ b/board/prodrive/p3mx/serial.c @@ -23,7 +23,6 @@ #include <linux/compiler.h> #include "../../Marvell/include/memory.h" -#include "serial.h" #include "mpsc.h" diff --git a/board/prodrive/p3mx/serial.h b/board/prodrive/p3mx/serial.h deleted file mode 100644 index 264e2d2..0000000 --- a/board/prodrive/p3mx/serial.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus <ingo.assmus@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/sandbox/sandbox/sandbox.c b/board/sandbox/sandbox/sandbox.c index 65dcce8..95efaff 100644 --- a/board/sandbox/sandbox/sandbox.c +++ b/board/sandbox/sandbox/sandbox.c @@ -23,11 +23,6 @@ unsigned long timer_read_counter(void) return os_get_nsec() / 1000; } -int timer_init(void) -{ - return 0; -} - int dram_init(void) { gd->ram_size = CONFIG_SYS_SDRAM_SIZE; diff --git a/board/sandpoint/speed.h b/board/sandpoint/speed.h deleted file mode 100644 index f1b10bf..0000000 --- a/board/sandpoint/speed.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*----------------------------------------------------------------------- - * Timer value for timer 2, ICLK = 10 - * - * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1)) - * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1 - * - * SPEED_FCOUNT2 timer 2 counting frequency - * GCLK CPU clock - * SPEED_TMR2_PS prescaler - */ -#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */ - -/*----------------------------------------------------------------------- - * Timer value for PIT - * - * PIT_TIME = SPEED_PITC / PITRTCLK - * PITRTCLK = 8192 - */ -#define SPEED_PITC (82 << 16) /* start counting from 82 */ - -/* - * The new value for PTA is calculated from - * - * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS) - * - * gclk CPU clock (not bus clock !) - * Trefresh Refresh cycle * 4 (four word bursts used) - * DFBRG For normal mode (no clock reduction) always 0 - * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh) - * NCS Number of SDRAM banks (chip selects) on this UPM. - */ diff --git a/board/sc3/init.S b/board/sc3/init.S index 46323d2..097aa4a 100644 --- a/board/sc3/init.S +++ b/board/sc3/init.S @@ -4,8 +4,6 @@ #include <config.h> #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/board/w7o/init.S b/board/w7o/init.S index 54eda32..dfde149 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -4,8 +4,6 @@ #include <config.h> #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/board/w7o/post1.S b/board/w7o/post1.S index 7a411a4..aae5387 100644 --- a/board/w7o/post1.S +++ b/board/w7o/post1.S @@ -13,8 +13,6 @@ #include <config.h> #include <asm/ppc4xx.h> -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -43,6 +43,7 @@ # Status, Arch, CPU:SPLCPU, SoC, Vendor, Board name, Target, Options, Maintainers ########################################################################################################### +Active aarch64 armv8 - armltd vexpress64 vexpress_aemv8a vexpress_aemv8a:ARM64 David Feng <fenghua@phytium.com.cn> Active arm arm1136 - armltd integrator integratorcp_cm1136 integratorcp:CM1136 Linus Walleij <linus.walleij@linaro.org> Active arm arm1136 mx31 - - imx31_phycore - - Active arm arm1136 mx31 davedenx - qong - Wolfgang Denk <wd@denx.de> @@ -136,11 +137,11 @@ Active arm arm926ejs at91 eukrea cpu9260 Active arm arm926ejs at91 ronetix pm9261 pm9261 pm9261:AT91SAM9261 Ilko Iliev <iliev@ronetix.at> Active arm arm926ejs at91 ronetix pm9263 pm9263 pm9263:AT91SAM9263 Ilko Iliev <iliev@ronetix.at> Active arm arm926ejs at91 ronetix pm9g45 pm9g45 pm9g45:AT91SAM9G45 Ilko Iliev <iliev@ronetix.at> -Active arm arm926ejs at91 taskit stamp9g20 portuxg20 stamp9g20:AT91SAM9G20,PORTUXG20 Markus Hubig <mhubig@imko.de> -Active arm arm926ejs at91 taskit stamp9g20 stamp9g20 stamp9g20:AT91SAM9G20 Markus Hubig <mhubig@imko.de> -Active arm arm926ejs at91 siemens taurus axm taurus:AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM Heiko Schocher <hs@denx.de> Active arm arm926ejs at91 siemens corvus corvus corvus:AT91SAM9M10G45,SYS_USE_NANDFLASH Heiko Schocher <hs@denx.de> +Active arm arm926ejs at91 siemens taurus axm taurus:AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM Heiko Schocher <hs@denx.de> Active arm arm926ejs at91 siemens taurus taurus taurus:AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS Heiko Schocher <hs@denx.de> +Active arm arm926ejs at91 taskit stamp9g20 portuxg20 stamp9g20:AT91SAM9G20,PORTUXG20 Markus Hubig <mhubig@imko.de> +Active arm arm926ejs at91 taskit stamp9g20 stamp9g20 stamp9g20:AT91SAM9G20 Markus Hubig <mhubig@imko.de> Active arm arm926ejs davinci ait cam_enc_4xx cam_enc_4xx cam_enc_4xx Heiko Schocher <hs@denx.de> Active arm arm926ejs davinci Barix ipam390 ipam390 - Heiko Schocher <hs@denx.de> Active arm arm926ejs davinci davinci da8xxevm da830evm - Nick Thompson <nick.thompson@gefanuc.com> @@ -168,8 +169,8 @@ Active arm arm926ejs kirkwood d-link - Active arm arm926ejs kirkwood iomega - iconnect - Luka Perkov <luka@openwrt.org> Active arm arm926ejs kirkwood karo tk71 tk71 - - Active arm arm926ejs kirkwood keymile km_arm km_kirkwood km_kirkwood:KM_KIRKWOOD Valentin Longchamp <valentin.longchamp@keymile.com> -Active arm arm926ejs kirkwood keymile km_arm km_kirkwood_pci km_kirkwood:KM_KIRKWOOD_PCI Valentin Longchamp <valentin.longchamp@keymile.com> Active arm arm926ejs kirkwood keymile km_arm km_kirkwood_128m16 km_kirkwood:KM_KIRKWOOD_128M16 Valentin Longchamp <valentin.longchamp@keymile.com> +Active arm arm926ejs kirkwood keymile km_arm km_kirkwood_pci km_kirkwood:KM_KIRKWOOD_PCI Valentin Longchamp <valentin.longchamp@keymile.com> Active arm arm926ejs kirkwood keymile km_arm kmcoge5un km_kirkwood:KM_COGE5UN Valentin Longchamp <valentin.longchamp@keymile.com> Active arm arm926ejs kirkwood keymile km_arm kmnusa km_kirkwood:KM_NUSA Valentin Longchamp <valentin.longchamp@keymile.com> Active arm arm926ejs kirkwood keymile km_arm kmsuv31 km_kirkwood:KM_SUV31 Valentin Longchamp <valentin.longchamp@keymile.com> @@ -275,7 +276,7 @@ Active arm armv7 exynos samsung arndale Active arm armv7 exynos samsung origen origen - Chander Kashyap <k.chander@samsung.com> Active arm armv7 exynos samsung smdk5250 smdk5250 - Chander Kashyap <k.chander@samsung.com> Active arm armv7 exynos samsung smdk5250 snow - Rajeshwari Shinde <rajeshwari.s@samsung.com> -Active arm armv7 exynos samsung smdk5420 smdk5420 - Rajeshwari Shinde <rajeshwari.s@samsung.com> +Active arm armv7 exynos samsung smdk5420 smdk5420 - Rajeshwari Shinde <rajeshwari.s@samsung.com> Active arm armv7 exynos samsung smdkv310 smdkv310 - Chander Kashyap <k.chander@samsung.com> Active arm armv7 exynos samsung trats trats - Lukasz Majewski <l.majewski@samsung.com> Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek@samsung.com> @@ -291,10 +292,11 @@ Active arm armv7 mx5 freescale mx53smd Active arm armv7 mx5 genesi mx51_efikamx mx51_efikamx mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg - Active arm armv7 mx5 genesi mx51_efikamx mx51_efikasb mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg - Active arm armv7 mx5 ttcontrol vision2 vision2 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg Stefano Babic <sbabic@denx.de> -Active arm armv7 mx6 - udoo udoo_quad udoo:IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com> +Active arm armv7 mx6 - udoo udoo_quad udoo:IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 - wandboard wandboard_dl wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 - wandboard wandboard_quad wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 - wandboard wandboard_solo wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 Fabio Estevam <fabio.estevam@freescale.com> +Active arm armv7 mx6 barco titanium titanium titanium:IMX_CONFIG=board/barco/titanium/imximage.cfg Stefan Roese <sr@denx.de> Active arm armv7 mx6 boundary nitrogen6x mx6qsabrelite nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE Eric Nelson <eric.nelson@boundarydevices.com> Active arm armv7 mx6 boundary nitrogen6x nitrogen6dl nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 Eric Nelson <eric.nelson@boundarydevices.com> Active arm armv7 mx6 boundary nitrogen6x nitrogen6dl2g nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048 Eric Nelson <eric.nelson@boundarydevices.com> @@ -308,8 +310,7 @@ Active arm armv7 mx6 freescale mx6qsabreauto Active arm armv7 mx6 freescale mx6sabresd mx6dlsabresd mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6sabresd mx6qsabresd mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Fabio Estevam <fabio.estevam@freescale.com> Active arm armv7 mx6 freescale mx6slevk mx6slevk mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL Fabio Estevam <fabio.estevam@freescale.com> -Active arm armv7 mx6 barco titanium titanium titanium:IMX_CONFIG=board/barco/titanium/imximage.cfg Stefan Roese <sr@denx.de> -Active arm armv7 mx6 solidrun hummingboard hummingboard_solo hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512 Jon Nettleton <jon.nettleton@gmail.com> +Active arm armv7 mx6 solidrun hummingboard hummingboard_solo hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512 Jon Nettleton <jon.nettleton@gmail.com> Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman <sakoman@gmail.com> Active arm armv7 omap3 - pandora omap3_pandora - Grazvydas Ignotas <notasas@gmail.com> Active arm armv7 omap3 8dtech eco5pk eco5pk - Raphael Assenat <raph@8d.com> @@ -346,27 +347,26 @@ Active arm armv7 omap5 ti dra7xx Active arm armv7 omap5 ti omap5_uevm omap5_uevm - - Active arm armv7 rmobile atmark-techno armadillo-800eva armadillo-800eva - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 rmobile kmc kzm9g kzm9g - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>:Tetsuyuki Kobayashi <koba@kmckk.co.jp> -Active arm armv7 rmobile renesas lager lager - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> -Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 rmobile renesas koelsch koelsch - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 rmobile renesas koelsch koelsch_nor koelsch:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> +Active arm armv7 rmobile renesas lager lager - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> +Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega <m.zalega@samsung.com> Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com> Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org> Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com> -Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> -Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> -Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> -Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> -Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> -Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm012 zynq_zc770:ZC770_XM012 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zc770_xm013 zynq_zc770:ZC770_XM013 Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> +Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren@nvidia.com> Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel <alban.bedel@avionic-design.de> Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel <alban.bedel@avionic-design.de> Active arm armv7:arm720t tegra20 avionic-design tec tec - Alban Bedel <alban.bedel@avionic-design.de> -Active arm armv7:arm720t tegra30 avionic-design tec-ng tec-ng - Alban Bedel <alban.bedel@avionic-design.de> Active arm armv7:arm720t tegra20 compal paz00 paz00 - Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com> Active arm armv7:arm720t tegra20 compulab trimslice trimslice - Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com> Active arm armv7:arm720t tegra20 nvidia harmony harmony - Tom Warren <twarren@nvidia.com> @@ -374,6 +374,7 @@ Active arm armv7:arm720t tegra20 nvidia seaboard Active arm armv7:arm720t tegra20 nvidia ventana ventana - Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com> Active arm armv7:arm720t tegra20 nvidia whistler whistler - Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com> Active arm armv7:arm720t tegra20 toradex colibri_t20_iris colibri_t20_iris - Lucas Stach <dev@lynxeye.de> +Active arm armv7:arm720t tegra30 avionic-design tec-ng tec-ng - Alban Bedel <alban.bedel@avionic-design.de> Active arm armv7:arm720t tegra30 nvidia beaver beaver - Tom Warren <twarren@nvidia.com>:Stephen Warren <swarren@nvidia.com> Active arm armv7:arm720t tegra30 nvidia cardhu cardhu - Tom Warren <twarren@nvidia.com> Active arm ixp - - - actux2 - Michael Schwingen <michael@schwingen.org> @@ -400,7 +401,6 @@ Active arm pxa - - vpac270 Active arm pxa - icpdas lp8x4x lp8x4x - Sergey Yanovich <ynvich@gmail.com> Active arm pxa - toradex - colibri_pxa270 - Marek Vasut <marek.vasut@gmail.com> Active arm sa1100 - - - jornada - Kristoffer Ericson <kristoffer.ericson@gmail.com> -Active aarch64 armv8 - armltd vexpress64 vexpress_aemv8a vexpress_aemv8a:ARM64 David Feng <fenghua@phytium.com.cn> Active avr32 at32ap at32ap700x atmel - atngw100 - Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Active avr32 at32ap at32ap700x atmel - atngw100mkii - Andreas Bießmann <andreas.devel@googlemail.com> Active avr32 at32ap at32ap700x atmel atstk1000 atstk1002 - Haavard Skinnemoen <haavard.skinnemoen@atmel.com> @@ -778,12 +778,12 @@ Active powerpc mpc85xx - - sbc8548 Active powerpc mpc85xx - - socrates socrates - - Active powerpc mpc85xx - exmeritus hww1u1a HWW1U1A - Kyle Moffett <Kyle.D.Moffett@boeing.com> Active powerpc mpc85xx - freescale b4860qds B4420QDS B4860QDS:PPC_B4420 - -Active powerpc mpc85xx - freescale b4860qds B4420QDS_NAND B4860QDS:PPC_B4420,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale b4860qds B4420QDS_SPIFLASH B4860QDS:PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale b4860qds B4420QDS_NAND B4860QDS:PPC_B4420,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale b4860qds B4420QDS_SPIFLASH B4860QDS:PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale b4860qds B4860QDS B4860QDS:PPC_B4860 - -Active powerpc mpc85xx - freescale b4860qds B4860QDS_NAND B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale b4860qds B4860QDS_SPIFLASH B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale b4860qds B4860QDS_SRIO_PCIE_BOOT B4860QDS:PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale b4860qds B4860QDS_NAND B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale b4860qds B4860QDS_SPIFLASH B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale b4860qds B4860QDS_SRIO_PCIE_BOOT B4860QDS:PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale bsc9131rdb BSC9131RDB_NAND BSC9131RDB:BSC9131RDB,NAND Poonam Aggrwal <poonam.aggrwal@freescale.com> Active powerpc mpc85xx - freescale bsc9131rdb BSC9131RDB_NAND_SYSCLK100 BSC9131RDB:BSC9131RDB,NAND,SYS_CLK_100 Poonam Aggrwal <poonam.aggrwal@freescale.com> Active powerpc mpc85xx - freescale bsc9131rdb BSC9131RDB_SPIFLASH BSC9131RDB:BSC9131RDB,SPIFLASH Poonam Aggrwal <poonam.aggrwal@freescale.com> @@ -797,28 +797,29 @@ Active powerpc mpc85xx - freescale bsc9132qds Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK100 BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100 Naveen Burmi <NaveenBurmi@freescale.com> Active powerpc mpc85xx - freescale bsc9132qds BSC9132QDS_SPIFLASH_DDRCLK133 BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133 Naveen Burmi <NaveenBurmi@freescale.com> Active powerpc mpc85xx - freescale c29xpcie C29XPCIE C29XPCIE:C29XPCIE,36BIT Po Liu <po.liu@freescale.com> +Active powerpc mpc85xx - freescale c29xpcie C29XPCIE_NAND C29XPCIE:C29XPCIE,36BIT,NAND Po Liu <po.liu@freescale.com> Active powerpc mpc85xx - freescale c29xpcie C29XPCIE_SPIFLASH C29XPCIE:C29XPCIE,36BIT,SPIFLASH Po Liu <po.liu@freescale.com> Active powerpc mpc85xx - freescale corenet_ds P3041DS - - -Active powerpc mpc85xx - freescale corenet_ds P3041DS_NAND P3041DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P3041DS_SDCARD P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P3041DS_NAND P3041DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P3041DS_SDCARD P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale corenet_ds P3041DS_SECURE_BOOT P3041DS:SECURE_BOOT - -Active powerpc mpc85xx - freescale corenet_ds P3041DS_SPIFLASH P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P3041DS_SRIO_PCIE_BOOT P3041DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P3041DS_SPIFLASH P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P3041DS_SRIO_PCIE_BOOT P3041DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale corenet_ds P4080DS - - -Active powerpc mpc85xx - freescale corenet_ds P4080DS_SDCARD P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P4080DS_SDCARD P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale corenet_ds P4080DS_SECURE_BOOT P4080DS:SECURE_BOOT - -Active powerpc mpc85xx - freescale corenet_ds P4080DS_SPIFLASH P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P4080DS_SRIO_PCIE_BOOT P4080DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P4080DS_SPIFLASH P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P4080DS_SRIO_PCIE_BOOT P4080DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale corenet_ds P5020DS - - -Active powerpc mpc85xx - freescale corenet_ds P5020DS_NAND P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P5020DS_SDCARD P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P5020DS_NAND P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P5020DS_SDCARD P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale corenet_ds P5020DS_SECURE_BOOT P5020DS:SECURE_BOOT - -Active powerpc mpc85xx - freescale corenet_ds P5020DS_SPIFLASH P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P5020DS_SRIO_PCIE_BOOT P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P5020DS_SPIFLASH P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P5020DS_SRIO_PCIE_BOOT P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale corenet_ds P5040DS - - -Active powerpc mpc85xx - freescale corenet_ds P5040DS_NAND P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P5040DS_SDCARD P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale corenet_ds P5040DS_SPIFLASH P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale corenet_ds P5040DS_NAND P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P5040DS_SDCARD P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale corenet_ds P5040DS_SPIFLASH P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS MPC8536DS - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_36BIT MPC8536DS:36BIT - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_NAND MPC8536DS:NAND - @@ -963,32 +964,33 @@ Active powerpc mpc85xx - freescale p2020ds Active powerpc mpc85xx - freescale p2020ds P2020DS_SDCARD P2020DS:SDCARD - Active powerpc mpc85xx - freescale p2020ds P2020DS_SPIFLASH P2020DS:SPIFLASH - Active powerpc mpc85xx - freescale p2041rdb P2041RDB - - -Active powerpc mpc85xx - freescale p2041rdb P2041RDB_NAND P2041RDB:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SDCARD P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale p2041rdb P2041RDB_NAND P2041RDB:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SDCARD P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SECURE_BOOT P2041RDB:SECURE_BOOT - -Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SPIFLASH P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SRIO_PCIE_BOOT P2041RDB:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SPIFLASH P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale p2041rdb P2041RDB_SRIO_PCIE_BOOT P2041RDB:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t104xrdb T1040RDB T1040RDB:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI T1042RDB_PI:PPC_T1042 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t2080qds T2080QDS T2080QDS:PPC_T2080 - +Active powerpc mpc85xx - freescale t2080qds T2080QDS_NAND T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SDCARD T2080QDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SPIFLASH T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SRIO_PCIE_BOOT T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale t4qds T4160QDS T4240QDS:PPC_T4160 - -Active powerpc mpc85xx - freescale t4qds T4160QDS_SDCARD T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t4qds T4160QDS_SPIFLASH T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - +Active powerpc mpc85xx - freescale t4qds T4160QDS_SDCARD T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t4qds T4160QDS_SPIFLASH T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale t4qds T4240EMU T4240EMU:PPC_T4240 York Sun <yorksun@freescale.com> Active powerpc mpc85xx - freescale t4qds T4240QDS T4240QDS:PPC_T4240 - -Active powerpc mpc85xx - freescale t4qds T4240QDS_NAND T4240QDS:PPC_T4240,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t4qds T4240QDS_SDCARD T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> -Active powerpc mpc85xx - freescale t104xrdb T1040RDB T1040RDB:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> -Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI T1042RDB_PI:PPC_T1042 Poonam Aggrwal <poonam.aggrwal@freescale.com> -Active powerpc mpc85xx - freescale t2080qds T2080QDS T2080QDS:PPC_T2080 -Active powerpc mpc85xx - freescale t2080qds T2080QDS_SDCARD T2080QDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 -Active powerpc mpc85xx - freescale t2080qds T2080QDS_SPIFLASH T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 -Active powerpc mpc85xx - freescale t2080qds T2080QDS_NAND T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 -Active powerpc mpc85xx - freescale t2080qds T2080QDS_SRIO_PCIE_BOOT T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t4qds T4240QDS_NAND T4240QDS:PPC_T4240,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t4qds T4240QDS_SDCARD T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER_DEVELOP controlcenterd:TRAILBLAZER,SPIFLASH,DEVELOP Dirk Eibach <eibach@gdsys.de> +Active powerpc mpc85xx - keymile kmp204x kmcoge4 kmp204x:KMCOGE4 Valentin Longchamp <valentin.longchamp@keymile.com> Active powerpc mpc85xx - keymile kmp204x kmlion1 kmp204x:KMLION1 Valentin Longchamp <valentin.longchamp@keymile.com> Active powerpc mpc85xx - stx stxgp3 stxgp3 - Dan Malek <dan@embeddedalley.com> Active powerpc mpc85xx - stx stxssa stxssa stxssa Dan Malek <dan@embeddedalley.com> diff --git a/common/Makefile b/common/Makefile index d12cba5..a83246e 100644 --- a/common/Makefile +++ b/common/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o obj-$(CONFIG_CMD_CACHE) += cmd_cache.o obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o +obj-$(CONFIG_CMD_CLK) += cmd_clk.o obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o @@ -197,6 +198,10 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o +ifdef CONFIG_SPL_USB_HOST_SUPPORT +obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o +obj-$(CONFIG_USB_STORAGE) += usb_storage.o +endif ifneq ($(CONFIG_SPL_NET_SUPPORT),y) obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o diff --git a/common/board_r.c b/common/board_r.c index 86ca1cb..c2d0763 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -903,9 +903,19 @@ init_fnc_t init_sequence_r[] = { void board_init_r(gd_t *new_gd, ulong dest_addr) { +#ifdef CONFIG_NEEDS_MANUAL_RELOC + int i; +#endif + #ifndef CONFIG_X86 gd = new_gd; #endif + +#ifdef CONFIG_NEEDS_MANUAL_RELOC + for (i = 0; i < ARRAY_SIZE(init_sequence_r); i++) + init_sequence_r[i] += gd->reloc_off; +#endif + if (initcall_run_list(init_sequence_r)) hang(); diff --git a/common/cmd_clk.c b/common/cmd_clk.c new file mode 100644 index 0000000..6d3d46a --- /dev/null +++ b/common/cmd_clk.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <command.h> +#include <clk.h> + +int __weak soc_clk_dump(void) +{ + puts("Not implemented\n"); + return 1; +} + +static int do_clk_dump(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + return soc_clk_dump(); +} + +static cmd_tbl_t cmd_clk_sub[] = { + U_BOOT_CMD_MKENT(dump, 1, 1, do_clk_dump, "", ""), +}; + +static int do_clk(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + cmd_tbl_t *c; + + if (argc < 2) + return CMD_RET_USAGE; + + /* Strip off leading 'clk' command argument */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], &cmd_clk_sub[0], ARRAY_SIZE(cmd_clk_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +#ifdef CONFIG_SYS_LONGHELP +static char clk_help_text[] = + "dump - Print clock frequencies"; +#endif + +U_BOOT_CMD(clk, 2, 1, do_clk, "CLK sub-system", clk_help_text); diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index c27ec35..2bd572d 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -445,6 +445,7 @@ struct pxe_label { char *append; char *initrd; char *fdt; + char *fdtdir; int ipappend; int attempted; int localboot; @@ -517,6 +518,9 @@ static void label_destroy(struct pxe_label *label) if (label->fdt) free(label->fdt); + if (label->fdtdir) + free(label->fdtdir); + free(label); } @@ -675,13 +679,67 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) bootm_argv[3] = getenv("fdt_addr_r"); /* if fdt label is defined then get fdt from server */ - if (bootm_argv[3] && label->fdt) { - if (get_relfile_envaddr(cmdtp, label->fdt, "fdt_addr_r") < 0) { - printf("Skipping %s for failure retrieving fdt\n", - label->name); - return 1; + if (bootm_argv[3]) { + char *fdtfile = NULL; + char *fdtfilefree = NULL; + + if (label->fdt) { + fdtfile = label->fdt; + } else if (label->fdtdir) { + fdtfile = getenv("fdtfile"); + /* + * For complex cases, it might be worth calling a + * board- or SoC-provided function here to provide a + * better default: + * + * if (!fdtfile) + * fdtfile = gen_fdtfile(); + * + * If this is added, be sure to keep the default below, + * or move it to the default weak implementation of + * gen_fdtfile(). + */ + if (!fdtfile) { + char *soc = getenv("soc"); + char *board = getenv("board"); + char *slash; + + len = strlen(label->fdtdir); + if (!len) + slash = "./"; + else if (label->fdtdir[len - 1] != '/') + slash = "/"; + else + slash = ""; + + len = strlen(label->fdtdir) + strlen(slash) + + strlen(soc) + 1 + strlen(board) + 5; + fdtfilefree = malloc(len); + if (!fdtfilefree) { + printf("malloc fail (FDT filename)\n"); + return 1; + } + + snprintf(fdtfilefree, len, "%s%s%s-%s.dtb", + label->fdtdir, slash, soc, board); + fdtfile = fdtfilefree; + } } - } else + + if (fdtfile) { + int err = get_relfile_envaddr(cmdtp, fdtfile, "fdt_addr_r"); + free(fdtfilefree); + if (err < 0) { + printf("Skipping %s for failure retrieving fdt\n", + label->name); + return 1; + } + } else { + bootm_argv[3] = NULL; + } + } + + if (!bootm_argv[3]) bootm_argv[3] = getenv("fdt_addr"); if (bootm_argv[3]) @@ -716,6 +774,7 @@ enum token_type { T_PROMPT, T_INCLUDE, T_FDT, + T_FDTDIR, T_ONTIMEOUT, T_IPAPPEND, T_INVALID @@ -745,7 +804,10 @@ static const struct token keywords[] = { {"append", T_APPEND}, {"initrd", T_INITRD}, {"include", T_INCLUDE}, + {"devicetree", T_FDT}, {"fdt", T_FDT}, + {"devicetreedir", T_FDTDIR}, + {"fdtdir", T_FDTDIR}, {"ontimeout", T_ONTIMEOUT,}, {"ipappend", T_IPAPPEND,}, {NULL, T_INVALID} @@ -1134,6 +1196,11 @@ static int parse_label(char **c, struct pxe_menu *cfg) err = parse_sliteral(c, &label->fdt); break; + case T_FDTDIR: + if (!label->fdtdir) + err = parse_sliteral(c, &label->fdtdir); + break; + case T_LOCALBOOT: label->localboot = 1; err = parse_integer(c, &label->localboot_val); diff --git a/common/spl/Makefile b/common/spl/Makefile index 5c0637b..65a1484 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -16,4 +16,6 @@ obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o obj-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o +obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o +obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o endif diff --git a/common/spl/spl.c b/common/spl/spl.c index da31457..0645cee 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -205,6 +205,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_net_load_image("usb_ether"); break; #endif +#ifdef CONFIG_SPL_USB_SUPPORT + case BOOT_DEVICE_USB: + spl_usb_load_image(); + break; +#endif default: debug("SPL: Un-supported Boot Device\n"); hang(); diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c new file mode 100644 index 0000000..1e532d5 --- /dev/null +++ b/common/spl/spl_fat.c @@ -0,0 +1,96 @@ +/* + * (C) Copyright 2014 + * Texas Instruments, <www.ti.com> + * + * Dan Murphy <dmurphy@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * FAT Image Functions copied from spl_mmc.c + */ + +#include <common.h> +#include <spl.h> +#include <asm/u-boot.h> +#include <fat.h> +#include <image.h> + +static int fat_registered; + +#ifdef CONFIG_SPL_FAT_SUPPORT +static int spl_register_fat_device(block_dev_desc_t *block_dev, int partition) +{ + int err = 0; + + if (fat_registered) + return err; + + err = fat_register_device(block_dev, partition); + if (err) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT + printf("%s: fat register err - %d\n", __func__, err); +#endif + hang(); + } + + fat_registered = 1; + + return err; +} + +int spl_load_image_fat(block_dev_desc_t *block_dev, + int partition, + const char *filename) +{ + int err; + struct image_header *header; + + err = spl_register_fat_device(block_dev, partition); + if (err) + goto end; + + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - + sizeof(struct image_header)); + + err = file_fat_read(filename, header, sizeof(struct image_header)); + if (err <= 0) + goto end; + + spl_parse_image_header(header); + + err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0); + +end: +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT + if (err <= 0) + printf("%s: error reading image %s, err - %d\n", + __func__, filename, err); +#endif + + return (err <= 0); +} + +#ifdef CONFIG_SPL_OS_BOOT +int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition) +{ + int err; + + err = spl_register_fat_device(block_dev, partition); + if (err) + return err; + + err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME, + (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + if (err <= 0) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT + printf("%s: error reading image %s, err - %d\n", + __func__, CONFIG_SPL_FAT_LOAD_ARGS_NAME, err); +#endif + return -1; + } + + return spl_load_image_fat(block_dev, partition, + CONFIG_SPL_FAT_LOAD_KERNEL_NAME); +} +#endif +#endif diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index fc2f226..13fbff0 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -10,7 +10,6 @@ #include <spl.h> #include <asm/u-boot.h> #include <mmc.h> -#include <fat.h> #include <version.h> #include <image.h> @@ -69,54 +68,6 @@ static int mmc_load_image_raw_os(struct mmc *mmc) } #endif -#ifdef CONFIG_SPL_FAT_SUPPORT -static int mmc_load_image_fat(struct mmc *mmc, const char *filename) -{ - int err; - struct image_header *header; - - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); - - err = file_fat_read(filename, header, sizeof(struct image_header)); - if (err <= 0) - goto end; - - spl_parse_image_header(header); - - err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0); - -end: -#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - if (err <= 0) - printf("spl: error reading image %s, err - %d\n", - filename, err); -#endif - - return (err <= 0); -} - -#ifdef CONFIG_SPL_OS_BOOT -static int mmc_load_image_fat_os(struct mmc *mmc) -{ - int err; - - err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME, - (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); - if (err <= 0) { -#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("spl: error reading image %s, err - %d\n", - CONFIG_SPL_FAT_LOAD_ARGS_NAME, err); -#endif - return -1; - } - - return mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_KERNEL_NAME); -} -#endif - -#endif - void spl_mmc_load_image(void) { struct mmc *mmc; @@ -148,24 +99,17 @@ void spl_mmc_load_image(void) if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) #endif err = mmc_load_image_raw(mmc, - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); #ifdef CONFIG_SPL_FAT_SUPPORT } else if (boot_mode == MMCSD_MODE_FAT) { debug("boot mode - FAT\n"); - - err = fat_register_device(&mmc->block_dev, - CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION); - if (err) { -#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("spl: fat register err - %d\n", err); -#endif - hang(); - } - #ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || mmc_load_image_fat_os(mmc)) + if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev, + CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION)) #endif - err = mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME); + err = spl_load_image_fat(&mmc->block_dev, + CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION, + CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME); #endif } else { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/common/spl/spl_usb.c b/common/spl/spl_usb.c new file mode 100644 index 0000000..53a9043 --- /dev/null +++ b/common/spl/spl_usb.c @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2014 + * Texas Instruments, <www.ti.com> + * + * Dan Murphy <dmurphy@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Derived work from spl_mmc.c + */ + +#include <common.h> +#include <spl.h> +#include <asm/u-boot.h> +#include <usb.h> +#include <fat.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_USB_STORAGE +static int usb_stor_curr_dev = -1; /* current device */ +#endif + +void spl_usb_load_image(void) +{ + int err; + block_dev_desc_t *stor_dev; + + usb_stop(); + err = usb_init(); + if (err) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT + printf("%s: usb init failed: err - %d\n", __func__, err); +#endif + hang(); + } + +#ifdef CONFIG_USB_STORAGE + /* try to recognize storage devices immediately */ + usb_stor_curr_dev = usb_stor_scan(1); + stor_dev = usb_stor_get_dev(usb_stor_curr_dev); +#endif + + debug("boot mode - FAT\n"); + +#ifdef CONFIG_SPL_OS_BOOT + if (spl_start_uboot() || spl_load_image_fat_os(stor_dev, + CONFIG_SYS_USB_FAT_BOOT_PARTITION)) +#endif + err = spl_load_image_fat(stor_dev, + CONFIG_SYS_USB_FAT_BOOT_PARTITION, + CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME); + + if (err) { + puts("Error loading USB device\n"); + hang(); + } +} @@ -250,16 +250,11 @@ Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file) endif endif -# Sandbox needs the base flags and includes, so keep them around -BASE_CPPFLAGS := $(CPPFLAGS) - ifneq ($(OBJTREE),$(SRCTREE)) -BASE_INCLUDE_DIRS := $(OBJTREE)/include +CPPFLAGS += -I$(OBJTREE)/include endif -BASE_INCLUDE_DIRS += $(TOPDIR)/include $(SRCTREE)/arch/$(ARCH)/include - -CPPFLAGS += $(patsubst %, -I%, $(BASE_INCLUDE_DIRS)) +CPPFLAGS += -I$(TOPDIR)/include -I$(SRCTREE)/arch/$(ARCH)/include CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \ -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) diff --git a/doc/README.SPL b/doc/README.SPL index 312a6a6..b1bc3ca 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -62,6 +62,7 @@ CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o) CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o) CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o) CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o) +CONFIG_SPL_DRIVERS_MISC_SUPPORT (drivers/misc) CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o) CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o) CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o) diff --git a/doc/README.b4860qds b/doc/README.b4860qds index 48ece4b..3da77d9 100644 --- a/doc/README.b4860qds +++ b/doc/README.b4860qds @@ -227,17 +227,17 @@ Start Address End Address Description Size NOR Flash memory Map on B4860 and B4420QDS ------------------------------------------ Start End Definition Size -0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB -0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB -0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB -0xEF300000 0xEFF3FFFF rootfs (alternate bank) 12MB + 256KB +0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB +0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB 0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB 0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB 0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB -0xEDF80000 0xEDFFFFFF u-boot (alternate bank) 512KB -0xEDF60000 0xEDF7FFFF u-boot env (alternate bank) 128KB -0xEDF40000 0xEDF5FFFF FMAN ucode (alternate bank) 128KB -0xED300000 0xEDF3FFFF rootfs (current bank) 12MB+256MB +0xEDF40000 0xEDFFFFFF u-boot (alternate bank) 768KB +0xEDF20000 0xEDF3FFFF u-boot env (alternate bank) 128KB +0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB +0xED300000 0xEDEFFFFF rootfs (current bank) 12MB 0xEC800000 0xEC8FFFFF device tree (current bank) 1MB 0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB 0xEC000000 0xEC01FFFF RCW (current bank) 128KB diff --git a/drivers/bios_emulator/include/x86emu/prim_asm.h b/drivers/bios_emulator/include/x86emu/prim_asm.h deleted file mode 100644 index 4cb4cab..0000000 --- a/drivers/bios_emulator/include/x86emu/prim_asm.h +++ /dev/null @@ -1,970 +0,0 @@ -/**************************************************************************** -* -* Realmode X86 Emulator Library -* -* Copyright (C) 1991-2004 SciTech Software, Inc. -* Copyright (C) David Mosberger-Tang -* Copyright (C) 1999 Egbert Eich -* -* ======================================================================== -* -* Permission to use, copy, modify, distribute, and sell this software and -* its documentation for any purpose is hereby granted without fee, -* provided that the above copyright notice appear in all copies and that -* both that copyright notice and this permission notice appear in -* supporting documentation, and that the name of the authors not be used -* in advertising or publicity pertaining to distribution of the software -* without specific, written prior permission. The authors makes no -* representations about the suitability of this software for any purpose. -* It is provided "as is" without express or implied warranty. -* -* THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, -* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO -* EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR -* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF -* USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR -* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -* PERFORMANCE OF THIS SOFTWARE. -* -* ======================================================================== -* -* Language: Watcom C++ 10.6 or later -* Environment: Any -* Developer: Kendall Bennett -* -* Description: Inline assembler versions of the primitive operand -* functions for faster performance. At the moment this is -* x86 inline assembler, but these functions could be replaced -* with native inline assembler for each supported processor -* platform. -* -****************************************************************************/ - -#ifndef __X86EMU_PRIM_ASM_H -#define __X86EMU_PRIM_ASM_H - -#ifdef __WATCOMC__ - -#ifndef VALIDATE -#define __HAVE_INLINE_ASSEMBLER__ -#endif - -u32 get_flags_asm(void); -#pragma aux get_flags_asm = \ - "pushf" \ - "pop eax" \ - value [eax] \ - modify exact [eax]; - -u16 aaa_word_asm(u32 * flags, u16 d); -#pragma aux aaa_word_asm = \ - "push [edi]" \ - "popf" \ - "aaa" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u16 aas_word_asm(u32 * flags, u16 d); -#pragma aux aas_word_asm = \ - "push [edi]" \ - "popf" \ - "aas" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u16 aad_word_asm(u32 * flags, u16 d); -#pragma aux aad_word_asm = \ - "push [edi]" \ - "popf" \ - "aad" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u16 aam_word_asm(u32 * flags, u8 d); -#pragma aux aam_word_asm = \ - "push [edi]" \ - "popf" \ - "aam" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [ax] \ - modify exact [ax]; - -u8 adc_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux adc_byte_asm = \ - "push [edi]" \ - "popf" \ - "adc al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 adc_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux adc_word_asm = \ - "push [edi]" \ - "popf" \ - "adc ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 adc_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux adc_long_asm = \ - "push [edi]" \ - "popf" \ - "adc eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -u8 add_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux add_byte_asm = \ - "push [edi]" \ - "popf" \ - "add al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 add_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux add_word_asm = \ - "push [edi]" \ - "popf" \ - "add ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 add_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux add_long_asm = \ - "push [edi]" \ - "popf" \ - "add eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -u8 and_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux and_byte_asm = \ - "push [edi]" \ - "popf" \ - "and al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 and_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux and_word_asm = \ - "push [edi]" \ - "popf" \ - "and ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 and_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux and_long_asm = \ - "push [edi]" \ - "popf" \ - "and eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -u8 cmp_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux cmp_byte_asm = \ - "push [edi]" \ - "popf" \ - "cmp al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 cmp_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux cmp_word_asm = \ - "push [edi]" \ - "popf" \ - "cmp ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 cmp_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux cmp_long_asm = \ - "push [edi]" \ - "popf" \ - "cmp eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -u8 daa_byte_asm(u32 * flags, u8 d); -#pragma aux daa_byte_asm = \ - "push [edi]" \ - "popf" \ - "daa" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [al] \ - modify exact [al]; - -u8 das_byte_asm(u32 * flags, u8 d); -#pragma aux das_byte_asm = \ - "push [edi]" \ - "popf" \ - "das" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [al] \ - modify exact [al]; - -u8 dec_byte_asm(u32 * flags, u8 d); -#pragma aux dec_byte_asm = \ - "push [edi]" \ - "popf" \ - "dec al" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [al] \ - modify exact [al]; - -u16 dec_word_asm(u32 * flags, u16 d); -#pragma aux dec_word_asm = \ - "push [edi]" \ - "popf" \ - "dec ax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u32 dec_long_asm(u32 * flags, u32 d); -#pragma aux dec_long_asm = \ - "push [edi]" \ - "popf" \ - "dec eax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] \ - value [eax] \ - modify exact [eax]; - -u8 inc_byte_asm(u32 * flags, u8 d); -#pragma aux inc_byte_asm = \ - "push [edi]" \ - "popf" \ - "inc al" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [al] \ - modify exact [al]; - -u16 inc_word_asm(u32 * flags, u16 d); -#pragma aux inc_word_asm = \ - "push [edi]" \ - "popf" \ - "inc ax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u32 inc_long_asm(u32 * flags, u32 d); -#pragma aux inc_long_asm = \ - "push [edi]" \ - "popf" \ - "inc eax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] \ - value [eax] \ - modify exact [eax]; - -u8 or_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux or_byte_asm = \ - "push [edi]" \ - "popf" \ - "or al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 or_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux or_word_asm = \ - "push [edi]" \ - "popf" \ - "or ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 or_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux or_long_asm = \ - "push [edi]" \ - "popf" \ - "or eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -u8 neg_byte_asm(u32 * flags, u8 d); -#pragma aux neg_byte_asm = \ - "push [edi]" \ - "popf" \ - "neg al" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [al] \ - modify exact [al]; - -u16 neg_word_asm(u32 * flags, u16 d); -#pragma aux neg_word_asm = \ - "push [edi]" \ - "popf" \ - "neg ax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u32 neg_long_asm(u32 * flags, u32 d); -#pragma aux neg_long_asm = \ - "push [edi]" \ - "popf" \ - "neg eax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] \ - value [eax] \ - modify exact [eax]; - -u8 not_byte_asm(u32 * flags, u8 d); -#pragma aux not_byte_asm = \ - "push [edi]" \ - "popf" \ - "not al" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] \ - value [al] \ - modify exact [al]; - -u16 not_word_asm(u32 * flags, u16 d); -#pragma aux not_word_asm = \ - "push [edi]" \ - "popf" \ - "not ax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] \ - value [ax] \ - modify exact [ax]; - -u32 not_long_asm(u32 * flags, u32 d); -#pragma aux not_long_asm = \ - "push [edi]" \ - "popf" \ - "not eax" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] \ - value [eax] \ - modify exact [eax]; - -u8 rcl_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux rcl_byte_asm = \ - "push [edi]" \ - "popf" \ - "rcl al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 rcl_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux rcl_word_asm = \ - "push [edi]" \ - "popf" \ - "rcl ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 rcl_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux rcl_long_asm = \ - "push [edi]" \ - "popf" \ - "rcl eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u8 rcr_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux rcr_byte_asm = \ - "push [edi]" \ - "popf" \ - "rcr al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 rcr_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux rcr_word_asm = \ - "push [edi]" \ - "popf" \ - "rcr ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 rcr_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux rcr_long_asm = \ - "push [edi]" \ - "popf" \ - "rcr eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u8 rol_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux rol_byte_asm = \ - "push [edi]" \ - "popf" \ - "rol al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 rol_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux rol_word_asm = \ - "push [edi]" \ - "popf" \ - "rol ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 rol_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux rol_long_asm = \ - "push [edi]" \ - "popf" \ - "rol eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u8 ror_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux ror_byte_asm = \ - "push [edi]" \ - "popf" \ - "ror al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 ror_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux ror_word_asm = \ - "push [edi]" \ - "popf" \ - "ror ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 ror_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux ror_long_asm = \ - "push [edi]" \ - "popf" \ - "ror eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u8 shl_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux shl_byte_asm = \ - "push [edi]" \ - "popf" \ - "shl al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 shl_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux shl_word_asm = \ - "push [edi]" \ - "popf" \ - "shl ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 shl_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux shl_long_asm = \ - "push [edi]" \ - "popf" \ - "shl eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u8 shr_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux shr_byte_asm = \ - "push [edi]" \ - "popf" \ - "shr al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 shr_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux shr_word_asm = \ - "push [edi]" \ - "popf" \ - "shr ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 shr_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux shr_long_asm = \ - "push [edi]" \ - "popf" \ - "shr eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u8 sar_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux sar_byte_asm = \ - "push [edi]" \ - "popf" \ - "sar al,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [cl] \ - value [al] \ - modify exact [al cl]; - -u16 sar_word_asm(u32 * flags, u16 d, u8 s); -#pragma aux sar_word_asm = \ - "push [edi]" \ - "popf" \ - "sar ax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [cl] \ - value [ax] \ - modify exact [ax cl]; - -u32 sar_long_asm(u32 * flags, u32 d, u8 s); -#pragma aux sar_long_asm = \ - "push [edi]" \ - "popf" \ - "sar eax,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [cl] \ - value [eax] \ - modify exact [eax cl]; - -u16 shld_word_asm(u32 * flags, u16 d, u16 fill, u8 s); -#pragma aux shld_word_asm = \ - "push [edi]" \ - "popf" \ - "shld ax,dx,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [dx] [cl] \ - value [ax] \ - modify exact [ax dx cl]; - -u32 shld_long_asm(u32 * flags, u32 d, u32 fill, u8 s); -#pragma aux shld_long_asm = \ - "push [edi]" \ - "popf" \ - "shld eax,edx,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [edx] [cl] \ - value [eax] \ - modify exact [eax edx cl]; - -u16 shrd_word_asm(u32 * flags, u16 d, u16 fill, u8 s); -#pragma aux shrd_word_asm = \ - "push [edi]" \ - "popf" \ - "shrd ax,dx,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [dx] [cl] \ - value [ax] \ - modify exact [ax dx cl]; - -u32 shrd_long_asm(u32 * flags, u32 d, u32 fill, u8 s); -#pragma aux shrd_long_asm = \ - "push [edi]" \ - "popf" \ - "shrd eax,edx,cl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [edx] [cl] \ - value [eax] \ - modify exact [eax edx cl]; - -u8 sbb_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux sbb_byte_asm = \ - "push [edi]" \ - "popf" \ - "sbb al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 sbb_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux sbb_word_asm = \ - "push [edi]" \ - "popf" \ - "sbb ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 sbb_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux sbb_long_asm = \ - "push [edi]" \ - "popf" \ - "sbb eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -u8 sub_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux sub_byte_asm = \ - "push [edi]" \ - "popf" \ - "sub al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 sub_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux sub_word_asm = \ - "push [edi]" \ - "popf" \ - "sub ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 sub_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux sub_long_asm = \ - "push [edi]" \ - "popf" \ - "sub eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -void test_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux test_byte_asm = \ - "push [edi]" \ - "popf" \ - "test al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - modify exact [al bl]; - -void test_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux test_word_asm = \ - "push [edi]" \ - "popf" \ - "test ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - modify exact [ax bx]; - -void test_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux test_long_asm = \ - "push [edi]" \ - "popf" \ - "test eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - modify exact [eax ebx]; - -u8 xor_byte_asm(u32 * flags, u8 d, u8 s); -#pragma aux xor_byte_asm = \ - "push [edi]" \ - "popf" \ - "xor al,bl" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [al] [bl] \ - value [al] \ - modify exact [al bl]; - -u16 xor_word_asm(u32 * flags, u16 d, u16 s); -#pragma aux xor_word_asm = \ - "push [edi]" \ - "popf" \ - "xor ax,bx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [ax] [bx] \ - value [ax] \ - modify exact [ax bx]; - -u32 xor_long_asm(u32 * flags, u32 d, u32 s); -#pragma aux xor_long_asm = \ - "push [edi]" \ - "popf" \ - "xor eax,ebx" \ - "pushf" \ - "pop [edi]" \ - parm [edi] [eax] [ebx] \ - value [eax] \ - modify exact [eax ebx]; - -void imul_byte_asm(u32 * flags, u16 * ax, u8 d, u8 s); -#pragma aux imul_byte_asm = \ - "push [edi]" \ - "popf" \ - "imul bl" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],ax" \ - parm [edi] [esi] [al] [bl] \ - modify exact [esi ax bl]; - -void imul_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 d, u16 s); -#pragma aux imul_word_asm = \ - "push [edi]" \ - "popf" \ - "imul bx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],ax" \ - "mov [ecx],dx" \ - parm [edi] [esi] [ecx] [ax] [bx]\ - modify exact [esi edi ax bx dx]; - -void imul_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 d, u32 s); -#pragma aux imul_long_asm = \ - "push [edi]" \ - "popf" \ - "imul ebx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],eax" \ - "mov [ecx],edx" \ - parm [edi] [esi] [ecx] [eax] [ebx] \ - modify exact [esi edi eax ebx edx]; - -void mul_byte_asm(u32 * flags, u16 * ax, u8 d, u8 s); -#pragma aux mul_byte_asm = \ - "push [edi]" \ - "popf" \ - "mul bl" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],ax" \ - parm [edi] [esi] [al] [bl] \ - modify exact [esi ax bl]; - -void mul_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 d, u16 s); -#pragma aux mul_word_asm = \ - "push [edi]" \ - "popf" \ - "mul bx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],ax" \ - "mov [ecx],dx" \ - parm [edi] [esi] [ecx] [ax] [bx]\ - modify exact [esi edi ax bx dx]; - -void mul_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 d, u32 s); -#pragma aux mul_long_asm = \ - "push [edi]" \ - "popf" \ - "mul ebx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],eax" \ - "mov [ecx],edx" \ - parm [edi] [esi] [ecx] [eax] [ebx] \ - modify exact [esi edi eax ebx edx]; - -void idiv_byte_asm(u32 * flags, u8 * al, u8 * ah, u16 d, u8 s); -#pragma aux idiv_byte_asm = \ - "push [edi]" \ - "popf" \ - "idiv bl" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],al" \ - "mov [ecx],ah" \ - parm [edi] [esi] [ecx] [ax] [bl]\ - modify exact [esi edi ax bl]; - -void idiv_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 dlo, u16 dhi, u16 s); -#pragma aux idiv_word_asm = \ - "push [edi]" \ - "popf" \ - "idiv bx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],ax" \ - "mov [ecx],dx" \ - parm [edi] [esi] [ecx] [ax] [dx] [bx]\ - modify exact [esi edi ax dx bx]; - -void idiv_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 dlo, u32 dhi, u32 s); -#pragma aux idiv_long_asm = \ - "push [edi]" \ - "popf" \ - "idiv ebx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],eax" \ - "mov [ecx],edx" \ - parm [edi] [esi] [ecx] [eax] [edx] [ebx]\ - modify exact [esi edi eax edx ebx]; - -void div_byte_asm(u32 * flags, u8 * al, u8 * ah, u16 d, u8 s); -#pragma aux div_byte_asm = \ - "push [edi]" \ - "popf" \ - "div bl" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],al" \ - "mov [ecx],ah" \ - parm [edi] [esi] [ecx] [ax] [bl]\ - modify exact [esi edi ax bl]; - -void div_word_asm(u32 * flags, u16 * ax, u16 * dx, u16 dlo, u16 dhi, u16 s); -#pragma aux div_word_asm = \ - "push [edi]" \ - "popf" \ - "div bx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],ax" \ - "mov [ecx],dx" \ - parm [edi] [esi] [ecx] [ax] [dx] [bx]\ - modify exact [esi edi ax dx bx]; - -void div_long_asm(u32 * flags, u32 * eax, u32 * edx, u32 dlo, u32 dhi, u32 s); -#pragma aux div_long_asm = \ - "push [edi]" \ - "popf" \ - "div ebx" \ - "pushf" \ - "pop [edi]" \ - "mov [esi],eax" \ - "mov [ecx],edx" \ - parm [edi] [esi] [ecx] [eax] [edx] [ebx]\ - modify exact [esi edi eax edx ebx]; - -#endif - -#endif /* __X86EMU_PRIM_ASM_H */ diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index 9f04133..c805086 100644 --- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -39,6 +39,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t; int csn = -1; #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003 + u32 save1, save2; +#endif switch (ctrl_num) { case 0: @@ -197,6 +200,8 @@ step2: out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff); out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb); out_be32(&ddr->mtcr, 0); + save1 = in_be32(&ddr->debug[12]); + save2 = in_be32(&ddr->debug[21]); out_be32(&ddr->debug[12], 0x00000015); out_be32(&ddr->debug[21], 0x24000000); out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff); @@ -214,6 +219,18 @@ step2: 0x04000000 | MD_CNTL_WRCW | MD_CNTL_MD_VALUE(0x02)); +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN)) + break; + while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN) + ; + out_be32(&ddr->sdram_md_cntl, + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL_CS2_CS3 | + 0x04000000 | + MD_CNTL_WRCW | + MD_CNTL_MD_VALUE(0x02)); +#endif break; case 0x00100000: out_be32(&ddr->sdram_md_cntl, @@ -222,6 +239,18 @@ step2: 0x04000000 | MD_CNTL_WRCW | MD_CNTL_MD_VALUE(0x0a)); +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN)) + break; + while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN) + ; + out_be32(&ddr->sdram_md_cntl, + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL_CS2_CS3 | + 0x04000000 | + MD_CNTL_WRCW | + MD_CNTL_MD_VALUE(0x0a)); +#endif break; case 0x00200000: out_be32(&ddr->sdram_md_cntl, @@ -230,6 +259,18 @@ step2: 0x04000000 | MD_CNTL_WRCW | MD_CNTL_MD_VALUE(0x12)); +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN)) + break; + while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN) + ; + out_be32(&ddr->sdram_md_cntl, + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL_CS2_CS3 | + 0x04000000 | + MD_CNTL_WRCW | + MD_CNTL_MD_VALUE(0x12)); +#endif break; case 0x00300000: out_be32(&ddr->sdram_md_cntl, @@ -238,6 +279,18 @@ step2: 0x04000000 | MD_CNTL_WRCW | MD_CNTL_MD_VALUE(0x1a)); +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN)) + break; + while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN) + ; + out_be32(&ddr->sdram_md_cntl, + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL_CS2_CS3 | + 0x04000000 | + MD_CNTL_WRCW | + MD_CNTL_MD_VALUE(0x1a)); +#endif break; default: out_be32(&ddr->sdram_md_cntl, @@ -246,6 +299,18 @@ step2: 0x04000000 | MD_CNTL_WRCW | MD_CNTL_MD_VALUE(0x02)); +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN)) + break; + while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN) + ; + out_be32(&ddr->sdram_md_cntl, + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL_CS2_CS3 | + 0x04000000 | + MD_CNTL_WRCW | + MD_CNTL_MD_VALUE(0x02)); +#endif printf("Unsupported RC10\n"); break; } @@ -259,8 +324,8 @@ step2: out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); - out_be32(&ddr->debug[12], 0x0); - out_be32(&ddr->debug[21], 0x0); + out_be32(&ddr->debug[12], save1); + out_be32(&ddr->debug[21], save2); out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); } diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index e3cd0c7..7b146a3 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -500,6 +500,10 @@ static int esdhc_getcd(struct mmc *mmc) struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; int timeout = 1000; +#ifdef CONFIG_ESDHC_DETECT_QUIRK + if (CONFIG_ESDHC_DETECT_QUIRK) + return 1; +#endif while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && --timeout) udelay(1000); @@ -592,6 +596,11 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) if (caps & ESDHC_HOSTCAPBLT_HSS) mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; +#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK + if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK) + mmc->host_caps &= ~MMC_MODE_8BIT; +#endif + mmc->f_min = 400000; mmc->f_max = MIN(gd->arch.sdhc_clk, 52000000); diff --git a/drivers/mmc/pxa_mmc.h b/drivers/mmc/pxa_mmc.h deleted file mode 100644 index 6fa4268..0000000 --- a/drivers/mmc/pxa_mmc.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/drivers/mmc/mmc_pxa.h - * - * Author: Vladimir Shebordaev, Igor Oblakov - * Copyright: MontaVista Software Inc. - * - * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __MMC_PXA_P_H__ -#define __MMC_PXA_P_H__ - -/* PXA-250 MMC controller registers */ - -/* MMC_STRPCL */ -#define MMC_STRPCL_STOP_CLK (0x0001UL) -#define MMC_STRPCL_START_CLK (0x0002UL) - -/* MMC_STAT */ -#define MMC_STAT_END_CMD_RES (0x0001UL << 13) -#define MMC_STAT_PRG_DONE (0x0001UL << 12) -#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11) -#define MMC_STAT_CLK_EN (0x0001UL << 8) -#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7) -#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6) -#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5) -#define MMC_STAT_SPI_READ_ERROR_TOKEN (0x0001UL << 4) -#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3) -#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2) -#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1) -#define MMC_STAT_READ_TIME_OUT (0x0001UL) - -#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\ - |MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\ - |MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR) - -/* MMC_CLKRT */ -#define MMC_CLKRT_20MHZ (0x0000UL) -#define MMC_CLKRT_10MHZ (0x0001UL) -#define MMC_CLKRT_5MHZ (0x0002UL) -#define MMC_CLKRT_2_5MHZ (0x0003UL) -#define MMC_CLKRT_1_25MHZ (0x0004UL) -#define MMC_CLKRT_0_625MHZ (0x0005UL) -#define MMC_CLKRT_0_3125MHZ (0x0006UL) - -/* MMC_SPI */ -#define MMC_SPI_DISABLE (0x00UL) -#define MMC_SPI_EN (0x01UL) -#define MMC_SPI_CS_EN (0x01UL << 2) -#define MMC_SPI_CS_ADDRESS (0x01UL << 3) -#define MMC_SPI_CRC_ON (0x01UL << 1) - -/* MMC_CMDAT */ -#define MMC_CMDAT_SD_4DAT (0x0001UL << 8) -#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7) -#define MMC_CMDAT_INIT (0x0001UL << 6) -#define MMC_CMDAT_BUSY (0x0001UL << 5) -#define MMC_CMDAT_BCR (0x0003UL << 5) -#define MMC_CMDAT_STREAM (0x0001UL << 4) -#define MMC_CMDAT_BLOCK (0x0000UL << 4) -#define MMC_CMDAT_WRITE (0x0001UL << 3) -#define MMC_CMDAT_READ (0x0000UL << 3) -#define MMC_CMDAT_DATA_EN (0x0001UL << 2) -#define MMC_CMDAT_R0 (0) -#define MMC_CMDAT_R1 (0x0001UL) -#define MMC_CMDAT_R2 (0x0002UL) -#define MMC_CMDAT_R3 (0x0003UL) - -/* MMC_RESTO */ -#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */ - -/* MMC_RDTO */ -#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */ - -/* MMC_BLKLEN */ -#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */ - -/* MMC_PRTBUF */ -#define MMC_PRTBUF_BUF_PART_FULL (0x01UL) -#define MMC_PRTBUF_BUF_FULL (0x00UL ) - -/* MMC_I_MASK */ -#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6) -#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5) -#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4) -#define MMC_I_MASK_STOP_CMD (0x01UL << 3) -#define MMC_I_MASK_END_CMD_RES (0x01UL << 2) -#define MMC_I_MASK_PRG_DONE (0x01UL << 1) -#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL) -#define MMC_I_MASK_ALL (0x07fUL) - - -/* MMC_I_REG */ -#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6) -#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5) -#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4) -#define MMC_I_REG_STOP_CMD (0x01UL << 3) -#define MMC_I_REG_END_CMD_RES (0x01UL << 2) -#define MMC_I_REG_PRG_DONE (0x01UL << 1) -#define MMC_I_REG_DATA_TRAN_DONE (0x01UL) -#define MMC_I_REG_ALL (0x007fUL) - -/* MMC_CMD */ -#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */ -#define CMD(x) (x) - -#define MMC_DEFAULT_RCA 1 - -#define MMC_BLOCK_SIZE 512 -#define MMC_MAX_BLOCK_SIZE 512 - -#define MMC_R1_IDLE_STATE 0x01 -#define MMC_R1_ERASE_STATE 0x02 -#define MMC_R1_ILLEGAL_CMD 0x04 -#define MMC_R1_COM_CRC_ERR 0x08 -#define MMC_R1_ERASE_SEQ_ERR 0x01 -#define MMC_R1_ADDR_ERR 0x02 -#define MMC_R1_PARAM_ERR 0x04 - -#define MMC_R1B_WP_ERASE_SKIP 0x0002 -#define MMC_R1B_ERR 0x0004 -#define MMC_R1B_CC_ERR 0x0008 -#define MMC_R1B_CARD_ECC_ERR 0x0010 -#define MMC_R1B_WP_VIOLATION 0x0020 -#define MMC_R1B_ERASE_PARAM 0x0040 -#define MMC_R1B_OOR 0x0080 -#define MMC_R1B_IDLE_STATE 0x0100 -#define MMC_R1B_ERASE_RESET 0x0200 -#define MMC_R1B_ILLEGAL_CMD 0x0400 -#define MMC_R1B_COM_CRC_ERR 0x0800 -#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -#define MMC_R1B_ADDR_ERR 0x2000 -#define MMC_R1B_PARAM_ERR 0x4000 - -#endif /* __MMC_PXA_P_H__ */ diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 1808a7f..be5a16a 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -230,8 +230,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) ctrl->page = page_addr; /* Program ROW0/COL0 */ - out_be32(&ifc->ifc_nand.row0, page_addr); - out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column); + ifc_out32(&ifc->ifc_nand.row0, page_addr); + ifc_out32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column); buf_num = page_addr & priv->bufnum_mask; @@ -294,23 +294,23 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) int i; /* set the chip select for NAND Transaction */ - out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); + ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); /* start read/write seq */ - out_be32(&ifc->ifc_nand.nandseq_strt, - IFC_NAND_SEQ_STRT_FIR_STRT); + ifc_out32(&ifc->ifc_nand.nandseq_strt, + IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for NAND Machine complete flag or timeout */ end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); while (end_tick > get_ticks()) { - ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat); + ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); if (ctrl->status & IFC_NAND_EVTER_STAT_OPC) break; } - out_be32(&ifc->ifc_nand.nand_evter_stat, ctrl->status); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, ctrl->status); if (ctrl->status & IFC_NAND_EVTER_STAT_FTOER) printf("%s: Flash Time Out Error\n", __func__); @@ -324,7 +324,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) int sector_end = sector + chip->ecc.steps - 1; for (i = sector / 4; i <= sector_end / 4; i++) - eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]); + eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]); for (i = sector; i <= sector_end; i++) { errors = check_read_ecc(mtd, ctrl, eccstat, i); @@ -364,30 +364,30 @@ static void fsl_ifc_do_read(struct nand_chip *chip, /* Program FIR/IFC_NAND_FCR0 for Small/Large page */ if (mtd->writesize > 512) { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); + + ifc_out32(&ifc->ifc_nand.nand_fcr0, + (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); } else { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT)); if (oob) - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT); else - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); } } @@ -408,7 +408,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, switch (command) { /* READ0 read the entire buffer to use hardware ECC. */ case NAND_CMD_READ0: { - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); set_addr(mtd, 0, page_addr, 0); ctrl->read_bytes = mtd->writesize + mtd->oobsize; @@ -424,7 +424,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* READOOB reads only the OOB because no ECC is performed. */ case NAND_CMD_READOOB: - out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column); + ifc_out32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column); set_addr(mtd, column, page_addr, 1); ctrl->read_bytes = mtd->writesize + mtd->oobsize; @@ -441,19 +441,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (command == NAND_CMD_PARAM) timing = IFC_FIR_OP_RBCD; - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (timing << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - command << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.row3, column); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (timing << IFC_NAND_FIR0_OP2_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + command << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.row3, column); /* * although currently it's 8 bytes for READID, we always read * the maximum 256 bytes(for PARAM) */ - out_be32(&ifc->ifc_nand.nand_fbcr, 256); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 256); ctrl->read_bytes = 256; set_addr(mtd, 0, 0, 0); @@ -468,16 +468,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* ERASE2 uses the block and page address from ERASE1 */ case NAND_CMD_ERASE2: - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); ctrl->read_bytes = 0; fsl_ifc_run_command(mtd); return; @@ -494,17 +494,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT); - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | - (IFC_FIR_OP_RDSTAT << + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_WBCD << + IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, + (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP6_SHIFT) | - (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT)); + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT)); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | @@ -513,18 +514,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD3_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | - (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | - (IFC_FIR_OP_RDSTAT << + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP7_SHIFT) | - (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT)); + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT)); if (column >= mtd->writesize) nand_fcr0 |= @@ -539,7 +540,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, column -= mtd->writesize; ctrl->oob = 1; } - out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0); + ifc_out32(&ifc->ifc_nand.nand_fcr0, nand_fcr0); set_addr(mtd, column, page_addr, ctrl->oob); return; } @@ -547,21 +548,21 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* PAGEPROG reuses all of the setup from SEQIN and adds the length */ case NAND_CMD_PAGEPROG: if (ctrl->oob) - out_be32(&ifc->ifc_nand.nand_fbcr, - ctrl->index - ctrl->column); + ifc_out32(&ifc->ifc_nand.nand_fbcr, + ctrl->index - ctrl->column); else - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); fsl_ifc_run_command(mtd); return; case NAND_CMD_STATUS: - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fbcr, 1); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 1); set_addr(mtd, 0, 0, 0); ctrl->read_bytes = 1; @@ -572,10 +573,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, return; case NAND_CMD_RESET: - out_be32(&ifc->ifc_nand.nand_fir0, - IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fir0, + IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT); fsl_ifc_run_command(mtd); return; @@ -647,8 +648,8 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd) * next byte. */ if (ctrl->index < ctrl->read_bytes) { - data = in_be16((uint16_t *)&ctrl-> - addr[ctrl->index]); + data = ifc_in16((uint16_t *)&ctrl-> + addr[ctrl->index]); ctrl->index += 2; return (uint8_t)data; } @@ -727,12 +728,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) return NAND_STATUS_FAIL; /* Use READ_STATUS command, but wait for the device to be ready */ - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS << - IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fbcr, 1); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS << + IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 1); set_addr(mtd, 0, 0, 0); ctrl->read_bytes = 1; @@ -741,7 +742,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) if (ctrl->status != IFC_NAND_EVTER_STAT_OPC) return NAND_STATUS_FAIL; - nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr); + nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr); /* Chip sometimes reporting write protect even when it's not */ nand_fsr = nand_fsr | NAND_STATUS_WP; @@ -784,17 +785,17 @@ static void fsl_ifc_ctrl_init(void) ifc_ctrl->regs = IFC_BASE_ADDR; /* clear event registers */ - out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U); - out_be32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U); + ifc_out32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U); + ifc_out32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U); /* Enable error and event for any detected errors */ - out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_en, - IFC_NAND_EVTER_EN_OPC_EN | - IFC_NAND_EVTER_EN_PGRDCMPL_EN | - IFC_NAND_EVTER_EN_FTOER_EN | - IFC_NAND_EVTER_EN_WPER_EN); + ifc_out32(&ifc_ctrl->regs->ifc_nand.nand_evter_en, + IFC_NAND_EVTER_EN_OPC_EN | + IFC_NAND_EVTER_EN_PGRDCMPL_EN | + IFC_NAND_EVTER_EN_FTOER_EN | + IFC_NAND_EVTER_EN_WPER_EN); - out_be32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0); + ifc_out32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0); } static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip) @@ -810,50 +811,50 @@ static void fsl_ifc_sram_init(void) cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT; /* Save CSOR and CSOR_ext */ - csor = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor); - csor_ext = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext); + csor = ifc_in32(&ifc_ctrl->regs->csor_cs[cs].csor); + csor_ext = ifc_in32(&ifc_ctrl->regs->csor_cs[cs].csor_ext); /* chage PageSize 8K and SpareSize 1K*/ csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000; - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k); - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400); /* READID */ - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.row3, 0x0); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.row3, 0x0); - out_be32(&ifc->ifc_nand.nand_fbcr, 0x0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0x0); /* Program ROW0/COL0 */ - out_be32(&ifc->ifc_nand.row0, 0x0); - out_be32(&ifc->ifc_nand.col0, 0x0); + ifc_out32(&ifc->ifc_nand.row0, 0x0); + ifc_out32(&ifc->ifc_nand.col0, 0x0); /* set the chip select for NAND Transaction */ - out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); + ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); /* start read seq */ - out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); + ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for NAND Machine complete flag or timeout */ end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); while (end_tick > get_ticks()) { - ifc_ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat); + ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC) break; } - out_be32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status); /* Restore CSOR and CSOR_ext */ - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor); - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext); } static int fsl_ifc_chip_init(int devnum, u8 *addr) @@ -883,8 +884,8 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) { phys_addr_t phys_addr = virt_to_phys(addr); - cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr); - csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor); + cspr = ifc_in32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr); + csor = ifc_in32(&ifc_ctrl->regs->csor_cs[priv->bank].csor); if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND && (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) { @@ -1004,7 +1005,7 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) nand->ecc.mode = NAND_ECC_SOFT; } - ver = in_be32(&ifc_ctrl->regs->ifc_rev); + ver = ifc_in32(&ifc_ctrl->regs->ifc_rev); if (ver == FSL_IFC_V1_1_0) fsl_ifc_sram_init(); diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index 9de327b..2f82f7c 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -60,7 +60,7 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size) bufnum_end = bufnum + bufperpage - 1; do { - status = in_be32(&ifc->ifc_nand.nand_evter_stat); + status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); } while (!(status & IFC_NAND_EVTER_STAT_OPC)); if (status & IFC_NAND_EVTER_STAT_FTOER) { @@ -70,14 +70,14 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size) } for (i = bufnum / 4; i <= bufnum_end / 4; i++) - eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]); + eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]); for (i = bufnum; i <= bufnum_end; i++) { if (check_read_ecc(buf, eccstat, i, page_size)) break; } - out_be32(&ifc->ifc_nand.nand_evter_stat, status); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, status); } static inline int bad_block(uchar *marker, int port_size) @@ -88,7 +88,11 @@ static inline int bad_block(uchar *marker, int port_size) return __raw_readw((u16 *)marker) != 0xffff; } -static void nand_load(unsigned int offs, int uboot_size, uchar *dst) +#ifdef CONFIG_TPL_BUILD +int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) +#else +static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst) +#endif { struct fsl_ifc *ifc = IFC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; @@ -105,6 +109,7 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) int sram_addr; int pg_no; + uchar *dst = vdst; /* Get NAND Flash configuration */ csor = CONFIG_SYS_NAND_CSOR; @@ -135,38 +140,38 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) blk_size = pages_per_blk * page_size; /* Open Full SRAM mapping for spare are access */ - out_be32(&ifc->ifc_nand.ncfgr, 0x0); + ifc_out32(&ifc->ifc_nand.ncfgr, 0x0); /* Clear Boot events */ - out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff); /* Program FIR/FCR for Large/Small page */ if (page_size > 512) { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); + + ifc_out32(&ifc->ifc_nand.nand_fcr0, + (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); } else { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); + + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); } /* Program FBCR = 0 for full page read */ - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); /* Read and copy u-boot on SDRAM from NAND device, In parallel * check for Bad block if found skip it and read continue to @@ -179,11 +184,11 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) bufnum = pg_no & bufnum_mask; sram_addr = bufnum * page_size * 2; - out_be32(&ifc->ifc_nand.row0, pg_no); - out_be32(&ifc->ifc_nand.col0, 0); + ifc_out32(&ifc->ifc_nand.row0, pg_no); + ifc_out32(&ifc->ifc_nand.col0, 0); /* start read */ - out_be32(&ifc->ifc_nand.nandseq_strt, - IFC_NAND_SEQ_STRT_FIR_STRT); + ifc_out32(&ifc->ifc_nand.nandseq_strt, + IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for read to complete */ nand_wait(&buf[sram_addr], bufnum, page_size); @@ -208,9 +213,20 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) offs += page_size; } while ((offs & (blk_size - 1)) && (pos < uboot_size)); } + + return 0; } /* + * Defines a static function nand_load_image() here, because non-static makes + * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) + */ +#ifndef CONFIG_TPL_BUILD +#define nand_spl_load_image(offs, uboot_size, vdst) \ + nand_load(offs, uboot_size, vdst) +#endif + +/* * Main entrypoint for NAND Boot. It's necessary that SDRAM is already * configured and available since this code loads the main U-boot image * from NAND into SDRAM and starts from there. @@ -221,16 +237,17 @@ void nand_boot(void) /* * Load U-Boot image from NAND into RAM */ - nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); + nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); #ifdef CONFIG_NAND_ENV_DST - nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_NAND_ENV_DST); + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_NAND_ENV_DST); #ifdef CONFIG_ENV_OFFSET_REDUND - nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); + nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, + (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); #endif #endif /* diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 74c72d3..cd787f4 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -276,64 +276,13 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) "status", "disabled", strlen("disabled") + 1, 1); } -#ifdef CONFIG_SYS_FMAN_V3 -static int ft_fixup_xgec(void *blob, struct fm_eth_info *info) -{ - int off, i, ci; -#define FM1_10GEC3_RX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x488000) -#define FM1_10GEC3_TX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4a8000) -#define FM1_10GEC3_MAC_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4e0000) - - if ((info->port == FM1_10GEC3) || (info->port == FM1_10GEC4)) { - ci = (info->port == FM1_10GEC3) ? 2 : 3; - i = (info->port == FM1_10GEC3) ? 0 : 1; - - off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-port-1g-rx", - FM1_10GEC3_RX_PORT_ADDR + - i * 0x1000); - if (off > 0) { - fdt_setprop(blob, off, "cell-index", &ci, sizeof(int)); - fdt_setprop(blob, off, "compatible", - "fsl,fman-port-10g-rx", 20); - } else { - goto err; - } - - off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-port-1g-tx", - FM1_10GEC3_TX_PORT_ADDR + - i * 0x1000); - if (off > 0) { - fdt_setprop(blob, off, "cell-index", &ci, sizeof(int)); - fdt_setprop(blob, off, "compatible", - "fsl,fman-port-10g-tx", 20); - } else { - goto err; - } - - off = fdt_node_offset_by_compat_reg(blob, "fsl,fman-memac", - FM1_10GEC3_MAC_ADDR + - i * 0x2000); - if (off > 0) - fdt_setprop(blob, off, "cell-index", &ci, sizeof(int)); - else - goto err; - } - return 0; -err: - printf("WARNING: Fail to find the node\n"); - return -1; -} -#endif - void fdt_fixup_fman_ethernet(void *blob) { int i; #ifdef CONFIG_SYS_FMAN_V3 - for (i = 0; i < ARRAY_SIZE(fm_info); i++) { + for (i = 0; i < ARRAY_SIZE(fm_info); i++) ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac"); - ft_fixup_xgec(blob, &fm_info[i]); - } #else for (i = 0; i < ARRAY_SIZE(fm_info); i++) { if (fm_info[i].type == FM_ETH_1G_E) diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c index 83cf081..bcc871d 100644 --- a/drivers/net/fm/t1040.c +++ b/drivers/net/fm/t1040.c @@ -12,5 +12,61 @@ phy_interface_t fman_port_enet_if(enum fm_port port) { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + /* handle RGMII first */ + if ((port == FM1_DTSEC2) && + ((rcwsr13 & FSL_CORENET_RCWSR13_MAC2_GMII_SEL) == + FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT)) { + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII) + return PHY_INTERFACE_MODE_RGMII; + else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII) + return PHY_INTERFACE_MODE_MII; + else + return PHY_INTERFACE_MODE_NONE; + } + + if ((port == FM1_DTSEC4) && + ((rcwsr13 & FSL_CORENET_RCWSR13_MAC2_GMII_SEL) == + FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH)) { + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII) + return PHY_INTERFACE_MODE_RGMII; + else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII) + return PHY_INTERFACE_MODE_MII; + else + return PHY_INTERFACE_MODE_NONE; + } + + if (port == FM1_DTSEC5) { + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII) + return PHY_INTERFACE_MODE_RGMII; + else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII) + return PHY_INTERFACE_MODE_MII; + else + return PHY_INTERFACE_MODE_NONE; + } + + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_QSGMII; + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + return PHY_INTERFACE_MODE_NONE; } diff --git a/drivers/net/fm/t2080.c b/drivers/net/fm/t2080.c index b5c1e9f..3b6212f 100644 --- a/drivers/net/fm/t2080.c +++ b/drivers/net/fm/t2080.c @@ -50,15 +50,17 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (is_device_disabled(port)) return PHY_INTERFACE_MODE_NONE; - if ((port == FM1_10GEC1 || port == FM1_10GEC2 || - port == FM1_10GEC3 || port == FM1_10GEC4) && + if ((port == FM1_10GEC1 || port == FM1_10GEC2) && ((is_serdes_configured(XAUI_FM1_MAC9)) || - (is_serdes_configured(XFI_FM1_MAC1)) || - (is_serdes_configured(XFI_FM1_MAC2)) || (is_serdes_configured(XFI_FM1_MAC9)) || (is_serdes_configured(XFI_FM1_MAC10)))) return PHY_INTERFACE_MODE_XGMII; + if ((port == FM1_10GEC3 || port == FM1_10GEC4) && + ((is_serdes_configured(XFI_FM1_MAC1)) || + (is_serdes_configured(XFI_FM1_MAC2)))) + return PHY_INTERFACE_MODE_XGMII; + if ((port == FM1_DTSEC3) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII)) return PHY_INTERFACE_MODE_RGMII; diff --git a/drivers/net/nicext.h b/drivers/net/nicext.h deleted file mode 100644 index ff422e7..0000000 --- a/drivers/net/nicext.h +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * Copyright(c) 2000-2001 Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - * - * Name: nicext.h - * - * Description: Broadcom Network Interface Card Extension (NICE) is an - * extension to Linux NET device kernel mode drivers. - * NICE is designed to provide additional functionalities, - * such as receive packet intercept. To support Broadcom NICE, - * the network device driver can be modified by adding an - * device ioctl handler and by indicating receiving packets - * to the NICE receive handler. Broadcom NICE will only be - * enabled by a NICE-aware intermediate driver, such as - * Broadcom Advanced Server Program Driver (BASP). When NICE - * is not enabled, the modified network device drivers - * functions exactly as other non-NICE aware drivers. - * - * Author: Frankie Fan - * - * Created: September 17, 2000 - * - ****************************************************************************/ -#ifndef _nicext_h_ -#define _nicext_h_ - -/* - * ioctl for NICE - */ -#define SIOCNICE SIOCDEVPRIVATE+7 - -/* - * SIOCNICE: - * - * The following structure needs to be less than IFNAMSIZ (16 bytes) because - * we're overloading ifreq.ifr_ifru. - * - * If 16 bytes is not enough, we should consider relaxing this because - * this is no field after ifr_ifru in the ifreq structure. But we may - * run into future compatiability problem in case of changing struct ifreq. - */ -struct nice_req -{ - __u32 cmd; - - union - { -#ifdef __KERNEL__ - /* cmd = NICE_CMD_SET_RX or NICE_CMD_GET_RX */ - struct - { - void (*nrqus1_rx)( struct sk_buff*, void* ); - void* nrqus1_ctx; - } nrqu_nrqus1; - - /* cmd = NICE_CMD_QUERY_SUPPORT */ - struct - { - __u32 nrqus2_magic; - __u32 nrqus2_support_rx:1; - __u32 nrqus2_support_vlan:1; - __u32 nrqus2_support_get_speed:1; - } nrqu_nrqus2; -#endif - - /* cmd = NICE_CMD_GET_SPEED */ - struct - { - unsigned int nrqus3_speed; /* 0 if link is down, */ - /* otherwise speed in Mbps */ - } nrqu_nrqus3; - - /* cmd = NICE_CMD_BLINK_LED */ - struct - { - unsigned int nrqus4_blink_time; /* blink duration in seconds */ - } nrqu_nrqus4; - - } nrq_nrqu; -}; - -#define nrq_rx nrq_nrqu.nrqu_nrqus1.nrqus1_rx -#define nrq_ctx nrq_nrqu.nrqu_nrqus1.nrqus1_ctx -#define nrq_support_rx nrq_nrqu.nrqu_nrqus2.nrqus2_support_rx -#define nrq_magic nrq_nrqu.nrqu_nrqus2.nrqus2_magic -#define nrq_support_vlan nrq_nrqu.nrqu_nrqus2.nrqus2_support_vlan -#define nrq_support_get_speed nrq_nrqu.nrqu_nrqus2.nrqus2_support_get_speed -#define nrq_speed nrq_nrqu.nrqu_nrqus3.nrqus3_speed -#define nrq_blink_time nrq_nrqu.nrqu_nrqus4.nrqus4_blink_time - -/* - * magic constants - */ -#define NICE_REQUESTOR_MAGIC 0x4543494E /* NICE in ascii */ -#define NICE_DEVICE_MAGIC 0x4E494345 /* ECIN in ascii */ - -/* - * command field - */ -#define NICE_CMD_QUERY_SUPPORT 0x00000001 -#define NICE_CMD_SET_RX 0x00000002 -#define NICE_CMD_GET_RX 0x00000003 -#define NICE_CMD_GET_SPEED 0x00000004 -#define NICE_CMD_BLINK_LED 0x00000005 - -#endif /* _nicext_h_ */ diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 2085cd6..6317fb1 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -510,8 +510,8 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* Print the negotiated PCIe link width */ pci_hose_read_config_word(hose, dev, pci_lsr, &temp16); - printf("x%d, regs @ 0x%lx\n", (temp16 & 0x3f0 ) >> 4, - pci_info->regs); + printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, + (temp16 & 0xf), pci_info->regs); hose->current_busno++; /* Start scan with secondary */ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); diff --git a/include/amba_clcd.h b/include/amba_clcd.h deleted file mode 100644 index db80517..0000000 --- a/include/amba_clcd.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Register definitions for the AMBA CLCD logic cell. - * - * derived from David A Rusling, although rearranged as a C structure - * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel. - * - * Copyright (C) 2001 ARM Limited - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * CLCD Controller Internal Register addresses - */ -struct clcd_registers { - u32 tim0; /* 0x00 */ - u32 tim1; - u32 tim2; - u32 tim3; - u32 ubas; /* 0x10 */ - u32 lbas; -#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW) - u32 ienb; - u32 cntl; -#else /* Someone rearranged these two registers on the Versatile */ - u32 cntl; - u32 ienb; -#endif - u32 stat; /* 0x20 */ - u32 intr; - u32 ucur; - u32 lcur; - u32 unused[0x74]; /* 0x030..0x1ff */ - u32 palette[0x80]; /* 0x200..0x3ff */ -}; - -/* Bit definition for TIM2 */ -#define TIM2_CLKSEL (1 << 5) -#define TIM2_IVS (1 << 11) -#define TIM2_IHS (1 << 12) -#define TIM2_IPC (1 << 13) -#define TIM2_IOE (1 << 14) -#define TIM2_BCD (1 << 26) - -/* Bit definitions for control register */ -#define CNTL_LCDEN (1 << 0) -#define CNTL_LCDBPP1 (0 << 1) -#define CNTL_LCDBPP2 (1 << 1) -#define CNTL_LCDBPP4 (2 << 1) -#define CNTL_LCDBPP8 (3 << 1) -#define CNTL_LCDBPP16 (4 << 1) -#define CNTL_LCDBPP16_565 (6 << 1) -#define CNTL_LCDBPP24 (5 << 1) -#define CNTL_LCDBW (1 << 4) -#define CNTL_LCDTFT (1 << 5) -#define CNTL_LCDMONO8 (1 << 6) -#define CNTL_LCDDUAL (1 << 7) -#define CNTL_BGR (1 << 8) -#define CNTL_BEBO (1 << 9) -#define CNTL_BEPO (1 << 10) -#define CNTL_LCDPWR (1 << 11) -#define CNTL_LCDVCOMP(x) ((x) << 12) -#define CNTL_LDMAFIFOTIME (1 << 15) -#define CNTL_WATERMARK (1 << 16) - -/* u-boot specific: information passed by the board file */ -struct clcd_config { - struct clcd_registers *address; - u32 tim0; - u32 tim1; - u32 tim2; - u32 tim3; - u32 cntl; - unsigned long pixclock; -}; diff --git a/include/asm-generic/global_data_flags.h b/include/asm-generic/global_data_flags.h deleted file mode 100644 index bb57fb6..0000000 --- a/include/asm-generic/global_data_flags.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * transitional header until we merge global_data.h - * - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __ASM_GENERIC_GLOBAL_DATA_FLAGS_H -#define __ASM_GENERIC_GLOBAL_DATA_FLAGS_H - -/* - * Global Data Flags - * - * Note: The low 16 bits are expected for common code. If your arch - * really needs to add your own, use the high 16bits. - */ -#define GD_FLG_RELOC 0x0001 /* Code was relocated to RAM */ -#define GD_FLG_DEVINIT 0x0002 /* Devices have been initialized */ -#define GD_FLG_SILENT 0x0004 /* Silent mode */ -#define GD_FLG_POSTFAIL 0x0008 /* Critical POST test failed */ -#define GD_FLG_POSTSTOP 0x0010 /* POST seqeunce aborted */ -#define GD_FLG_LOGINIT 0x0020 /* Log Buffer has been initialized */ -#define GD_FLG_DISABLE_CONSOLE 0x0040 /* Disable console (in & out) */ -#define GD_FLG_ENV_READY 0x0080 /* Environment imported into hash table */ - -#endif diff --git a/include/at45.h b/include/at45.h deleted file mode 100644 index df649ba..0000000 --- a/include/at45.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef _AT45_H_ -#define _AT45_H_ -#ifdef CONFIG_DATAFLASH_MMC_SELECT -extern void AT91F_SelectMMC(void); -extern void AT91F_SelectSPI(void); -extern int AT91F_GetMuxStatus(void); -#endif -extern void AT91F_SpiInit(void); -extern void AT91F_SpiEnable(int cs); -extern unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc ); -extern AT91S_DataFlashStatus AT91F_DataFlashSendCommand( - AT91PS_DataFlash pDataFlash, - unsigned char OpCode, - unsigned int CmdSize, - unsigned int DataflashAddress); -extern AT91S_DataFlashStatus AT91F_DataFlashGetStatus ( - AT91PS_DataflashDesc pDesc); -extern AT91S_DataFlashStatus AT91F_DataFlashWaitReady ( - AT91PS_DataflashDesc pDataFlashDesc, - unsigned int timeout); -extern AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( - AT91PS_DataFlash pDataFlash, - int src, - unsigned char *dataBuffer, - int sizeToRead ); -extern AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int SizeToWrite); -extern AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int page); -extern AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned char *dataBuffer, - unsigned int bufferAddress, - int SizeToWrite ); -extern AT91S_DataFlashStatus AT91F_PageErase( - AT91PS_DataFlash pDataFlash, - unsigned int page); -extern AT91S_DataFlashStatus AT91F_BlockErase( - AT91PS_DataFlash pDataFlash, - unsigned int block); -extern AT91S_DataFlashStatus AT91F_WriteBufferToMain ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int dest ); -extern AT91S_DataFlashStatus AT91F_PartialPageWrite ( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int size); -extern AT91S_DataFlashStatus AT91F_DataFlashWrite( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ); -extern int AT91F_DataFlashRead( - AT91PS_DataFlash pDataFlash, - unsigned long addr, - unsigned long size, - char *buffer); -extern int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc); - -#endif diff --git a/include/at91rm9200_i2c.h b/include/at91rm9200_i2c.h deleted file mode 100644 index 4866606..0000000 --- a/include/at91rm9200_i2c.h +++ /dev/null @@ -1,114 +0,0 @@ -/* ---------------------------------------------------------------------------- */ -/* ATMEL Microcontroller Software Support - ROUSSET - */ -/* ---------------------------------------------------------------------------- */ -/* The software is delivered "AS IS" without warranty or condition of any */ -/* kind, either express, implied or statutory. This includes without */ -/* limitation any warranty or condition with respect to merchantability or */ -/* fitness for any particular purpose, or against the infringements of */ -/* intellectual property rights of others. */ -/* ---------------------------------------------------------------------------- */ -/* File Name : at91rm9200_i2c.h */ -/* Object : AT91RM9200 / TWI definitions */ -/* Generated : AT91 SW Application Group 12/03/2002 (10:48:02) */ -/* */ -/* ---------------------------------------------------------------------------- */ - -#ifndef AT91RM9200_TWI_H -#define AT91RM9200_TWI_H - -/* ******************************************************************************/ -/* SOFTWARE API DEFINITION FOR Two-wire Interface */ -/* ******************************************************************************/ -#ifndef __ASSEMBLY__ - -typedef struct _AT91S_TWI { - AT91_REG TWI_CR; /* Control Register */ - AT91_REG TWI_MMR; /* Master Mode Register */ - AT91_REG TWI_SMR; /* Slave Mode Register */ - AT91_REG TWI_IADR; /* Internal Address Register */ - AT91_REG TWI_CWGR; /* Clock Waveform Generator Register */ - AT91_REG Reserved0[3]; - AT91_REG TWI_SR; /* Status Register */ - AT91_REG TWI_IER; /* Interrupt Enable Register */ - AT91_REG TWI_IDR; /* Interrupt Disable Register */ - AT91_REG TWI_IMR; /* Interrupt Mask Register */ - AT91_REG TWI_RHR; /* Receive Holding Register */ - AT91_REG TWI_THR; /* Transmit Holding Register */ - AT91_REG Reserved1[50]; - AT91_REG TWI_RPR; /* Receive Pointer Register */ - AT91_REG TWI_RCR; /* Receive Counter Register */ - AT91_REG TWI_TPR; /* Transmit Pointer Register */ - AT91_REG TWI_TCR; /* Transmit Counter Register */ - AT91_REG TWI_RNPR; /* Receive Next Pointer Register */ - AT91_REG TWI_RNCR; /* Receive Next Counter Register */ - AT91_REG TWI_TNPR; /* Transmit Next Pointer Register */ - AT91_REG TWI_TNCR; /* Transmit Next Counter Register */ - AT91_REG TWI_PTCR; /* PDC Transfer Control Register */ - AT91_REG TWI_PTSR; /* PDC Transfer Status Register */ -} AT91S_TWI, *AT91PS_TWI; - -#endif - -/* -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- */ -#define AT91C_TWI_START (0x1 << 0) /* (TWI) Send a START Condition */ -#define AT91C_TWI_STOP (0x1 << 1) /* (TWI) Send a STOP Condition */ -#define AT91C_TWI_MSEN (0x1 << 2) /* (TWI) TWI Master Transfer Enabled */ -#define AT91C_TWI_MSDIS (0x1 << 3) /* (TWI) TWI Master Transfer Disabled */ -#define AT91C_TWI_SVEN (0x1 << 4) /* (TWI) TWI Slave Transfer Enabled */ -#define AT91C_TWI_SVDIS (0x1 << 5) /* (TWI) TWI Slave Transfer Disabled */ -#define AT91C_TWI_SWRST (0x1 << 7) /* (TWI) Software Reset */ -/* -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- */ -#define AT91C_TWI_IADRSZ (0x3 << 8) /* (TWI) Internal Device Address Size */ -#define AT91C_TWI_IADRSZ_NO (0x0 << 8) /* (TWI) No internal device address */ -#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) /* (TWI) One-byte internal device address */ -#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) /* (TWI) Two-byte internal device address */ -#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) /* (TWI) Three-byte internal device address */ -#define AT91C_TWI_MREAD (0x1 << 12) /* (TWI) Master Read Direction */ -#define AT91C_TWI_DADR (0x7F << 6) /* (TWI) Device Address */ -/* -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- */ -#define AT91C_TWI_SADR (0x7F << 16) /* (TWI) Slave Device Address */ -/* -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- */ -#define AT91C_TWI_CLDIV (0xFF << 0) /* (TWI) Clock Low Divider */ -#define AT91C_TWI_CHDIV (0xFF << 8) /* (TWI) Clock High Divider */ -#define AT91C_TWI_CKDIV (0x7 << 16) /* (TWI) Clock Divider */ -/* -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- */ -#define AT91C_TWI_TXCOMP (0x1 << 0) /* (TWI) Transmission Completed */ -#define AT91C_TWI_RXRDY (0x1 << 1) /* (TWI) Receive holding register ReaDY */ -#define AT91C_TWI_TXRDY (0x1 << 2) /* (TWI) Transmit holding register ReaDY*/ -#define AT91C_TWI_SVREAD (0x1 << 3) /* (TWI) Slave Read */ -#define AT91C_TWI_SVACC (0x1 << 4) /* (TWI) Slave Access */ -#define AT91C_TWI_GCACC (0x1 << 5) /* (TWI) General Call Access */ -#define AT91C_TWI_OVRE (0x1 << 6) /* (TWI) Overrun Error */ -#define AT91C_TWI_UNRE (0x1 << 7) /* (TWI) Underrun Error */ -#define AT91C_TWI_NACK (0x1 << 8) /* (TWI) Not Acknowledged */ -#define AT91C_TWI_ARBLST (0x1 << 9) /* (TWI) Arbitration Lost */ -/* -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- */ -/* -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register ------- */ -/* -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- */ - -/* - i2c Support for Atmel's AT91RM9200 Two-Wire Interface - - (c) Rick Bronson - - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef AT91_I2C_H -#define AT91_I2C_H - -#define AT91C_TWI_CLOCK 100000 -#define AT91C_TWI_SCLOCK (10 * AT91C_MASTER_CLOCK / AT91C_TWI_CLOCK) -#define AT91C_TWI_CKDIV1 (2 << 16) /* TWI clock divider. NOTE: see Errata #22 */ - -#if (AT91C_TWI_SCLOCK % 10) >= 5 -#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 5) -#else -#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 6) -#endif -#define AT91C_TWI_CLDIV3 ((AT91C_TWI_CLDIV2 + (4 - AT91C_TWI_CLDIV2 % 4)) >> 2) - -#define AT91C_EEPROM_I2C_ADDRESS (0x50 << 16) - -#endif /* __ASSEMBLY__ */ -#endif /* AT91RM9200_TWI_H */ diff --git a/include/at91rm9200_net.h b/include/at91rm9200_net.h deleted file mode 100644 index 831cb1e..0000000 --- a/include/at91rm9200_net.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Ethernet: An implementation of the Ethernet Device Driver suite for the - * uClinux 2.0.38 operating system. This Driver has been developed - * for AT75C220 board. - * - * NOTE: The driver is implemented for one MAC - * - * Version: @(#)at91rm9200_net.h 1.0.0 01/10/2001 - * - * Authors: Lineo Inc <www.lineo.com> - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef AT91RM9200_ETHERNET -#define AT91RM9200_ETHERNET - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -#define ETHERNET_ADDRESS_SIZE 6 - -typedef unsigned char UCHAR; - -/* Interface to drive the physical layer */ -typedef struct _AT91S_PhyOps -{ - unsigned char (*Init)(AT91S_EMAC *pmac); - unsigned int (*IsPhyConnected)(AT91S_EMAC *pmac); - unsigned char (*GetLinkSpeed)(AT91S_EMAC *pmac); - unsigned char (*AutoNegotiate)(AT91S_EMAC *pmac, int *); - -} AT91S_PhyOps,*AT91PS_PhyOps; - - -#define EMAC_DESC_DONE 0x00000001 /* ownership bit */ -#define EMAC_DESC_WRAP 0x00000002 /* bit for wrap */ - -/****************** function prototypes **********************/ - -/* MII functions */ -void at91rm9200_EmacEnableMDIO(AT91PS_EMAC p_mac); -void at91rm9200_EmacDisableMDIO(AT91PS_EMAC p_mac); -UCHAR at91rm9200_EmacReadPhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pInput); -UCHAR at91rm9200_EmacWritePhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pOutput); -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops); - -#endif /* AT91RM9200_ETHERNET */ diff --git a/include/bcm5221.h b/include/bcm5221.h deleted file mode 100644 index 4719389..0000000 --- a/include/bcm5221.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Broadcom BCM5221 Ethernet PHY - * - * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de> - * Anders Larsen <alarsen@rea.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define BCM5221_BMCR 0 /* Basic Mode Control Register */ -#define BCM5221_BMSR 1 /* Basic Mode Status Register */ -#define BCM5221_PHYID1 2 /* PHY Identifier Register 1 */ -#define BCM5221_PHYID2 3 /* PHY Identifier Register 2 */ -#define BCM5221_ANAR 4 /* Auto-negotiation Advertisement Register */ -#define BCM5221_ANLPAR 5 /* Auto-negotiation Link Partner Ability Register */ -#define BCM5221_ANER 6 /* Auto-negotiation Expansion Register */ -#define BCM5221_ACSR 24 /* Auxiliary Control/Status Register */ -#define BCM5221_INTR 26 /* Interrupt Register */ - -/* --Bit definitions: BCM5221_BMCR */ -#define BCM5221_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */ -#define BCM5221_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */ -#define BCM5221_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */ -#define BCM5221_AUTONEG (1 << 12) -#define BCM5221_POWER_DOWN (1 << 11) -#define BCM5221_ISOLATE (1 << 10) -#define BCM5221_RESTART_AUTONEG (1 << 9) -#define BCM5221_DUPLEX_MODE (1 << 8) -#define BCM5221_COLLISION_TEST (1 << 7) - -/*--Bit definitions: BCM5221_BMSR */ -#define BCM5221_100BASE_T4 (1 << 15) -#define BCM5221_100BASE_TX_FD (1 << 14) -#define BCM5221_100BASE_TX_HD (1 << 13) -#define BCM5221_10BASE_T_FD (1 << 12) -#define BCM5221_10BASE_T_HD (1 << 11) -#define BCM5221_MF_PREAMB_SUPPR (1 << 6) -#define BCM5221_AUTONEG_COMP (1 << 5) -#define BCM5221_REMOTE_FAULT (1 << 4) -#define BCM5221_AUTONEG_ABILITY (1 << 3) -#define BCM5221_LINK_STATUS (1 << 2) -#define BCM5221_JABBER_DETECT (1 << 1) -#define BCM5221_EXTEND_CAPAB (1 << 0) - -/*--definitions: BCM5221_PHYID1 */ -#define BCM5221_PHYID1_OUI 0x1018 -#define BCM5221_LSB_MASK 0x3F - -/*--Bit definitions: BCM5221_ANAR, BCM5221_ANLPAR */ -#define BCM5221_NP (1 << 15) -#define BCM5221_ACK (1 << 14) -#define BCM5221_RF (1 << 13) -#define BCM5221_FCS (1 << 10) -#define BCM5221_T4 (1 << 9) -#define BCM5221_TX_FDX (1 << 8) -#define BCM5221_TX_HDX (1 << 7) -#define BCM5221_10_FDX (1 << 6) -#define BCM5221_10_HDX (1 << 5) -#define BCM5221_AN_IEEE_802_3 0x0001 - -/*--Bit definitions: BCM5221_ANER */ -#define BCM5221_PDF (1 << 4) -#define BCM5221_LP_NP_ABLE (1 << 3) -#define BCM5221_NP_ABLE (1 << 2) -#define BCM5221_PAGE_RX (1 << 1) -#define BCM5221_LP_AN_ABLE (1 << 0) - -/*--Bit definitions: BCM5221_ACSR */ -#define BCM5221_100 (1 << 1) -#define BCM5221_FDX (1 << 0) - -/*--Bit definitions: BCM5221_INTR */ -#define BCM5221_FDX_LED (1 << 15) -#define BCM5221_INTR_ENABLE (1 << 14) -#define BCM5221_FDX_MASK (1 << 11) -#define BCM5221_SPD_MASK (1 << 10) -#define BCM5221_LINK_MASK (1 << 9) -#define BCM5221_INTR_MASK (1 << 8) -#define BCM5221_FDX_CHG (1 << 3) -#define BCM5221_SPD_CHG (1 << 2) -#define BCM5221_LINK_CHG (1 << 1) -#define BCM5221_INTR_STATUS (1 << 0) - -/****************** function prototypes **********************/ -unsigned int bcm5221_IsPhyConnected(AT91PS_EMAC p_mac); -unsigned char bcm5221_GetLinkSpeed(AT91PS_EMAC p_mac); -unsigned char bcm5221_AutoNegotiate(AT91PS_EMAC p_mac, int *status); -unsigned char bcm5221_InitPhy(AT91PS_EMAC p_mac); diff --git a/include/clk.h b/include/clk.h new file mode 100644 index 0000000..df4570c --- /dev/null +++ b/include/clk.h @@ -0,0 +1,6 @@ +#ifndef _CLK_H_ +#define _CLK_H_ + +int soc_clk_dump(void); + +#endif /* _CLK_H_ */ diff --git a/include/common.h b/include/common.h index d49c514..d5ebb25 100644 --- a/include/common.h +++ b/include/common.h @@ -8,9 +8,6 @@ #ifndef __COMMON_H_ #define __COMMON_H_ 1 -#undef _LINUX_CONFIG_H -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - #ifndef __ASSEMBLY__ /* put C only stuff in this section */ typedef unsigned char uchar; diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index d847069..3e8983f 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -23,6 +23,7 @@ #define CONFIG_CMD_BSP /* Board Specific functions */ #define CONFIG_CMD_CACHE /* icache, dcache */ #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ +#define CONFIG_CMD_CLK /* Clock support */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ #define CONFIG_CMD_DHCP /* DHCP Support */ diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 8f3a672..35e3e6f 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_A3000 1 diff --git a/include/configs/APC405.h b/include/configs/APC405.h index afc9ae8..2678f50 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -19,7 +19,6 @@ * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_APCG405 1 /* ...on a APC405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/AR405.h b/include/configs/AR405.h index a4bd4b1..45dd46a 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_AR405 1 /* ...on a AR405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 2f53407..2ff9b59 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_ASH405 1 /* ...on a ASH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h deleted file mode 100644 index ef76ce4..0000000 --- a/include/configs/AdderUSB.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2006 CodeHermit. - * Bryan O'Donoghue <bodonoghue@codehermit.ie> - * - * Provides support for USB console on the Analogue & Micro Adder87x - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ADDERUSB__ -#define __ADDERUSB__ - -/* Include the board port */ -#include "Adder.h" - -#define CONFIG_USB_DEVICE /* Include UDC driver */ -#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ -#define CONFIG_SYS_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ -#define CONFIG_SYS_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Console is in env */ - -/* If you have a USB-IF assigned VendorID then you may wish to define - * your own vendor specific values either in BoardName.h or directly in - * usbd_vendor_info.h - */ - -/* -#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" -#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" -#define CONFIG_USBD_VENDORID 0xFFFF -#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF -#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE -*/ - -#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index c182158..64acc88 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -16,8 +16,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -34,11 +34,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -115,7 +114,7 @@ #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -608,7 +607,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -621,7 +620,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 377db7b..802e9cc 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -22,8 +22,7 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on a TQM5200 module */ #define CONFIG_BC3450 1 /* ... on a BC3450 mainboard */ diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 584aba8..a163e3d 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -21,7 +21,7 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_NAND @@ -38,7 +38,7 @@ #define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 #define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 @@ -55,7 +55,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48/P1020/P2020/P1010,etc*/ #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -326,7 +325,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_IS_IN_NAND #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 6170cbc..052a0f1 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -22,7 +22,7 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 #ifdef CONFIG_SPIFLASH @@ -30,7 +30,7 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_NAND @@ -47,7 +47,7 @@ #define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 #define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 @@ -55,7 +55,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x8ff80000 +#define CONFIG_SYS_TEXT_BASE 0x8ff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -71,7 +71,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ @@ -540,6 +539,7 @@ combinations. this should be removed later */ #if defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_RAMBOOT_SPIFLASH) @@ -554,7 +554,7 @@ combinations. this should be removed later #elif defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ @@ -562,13 +562,9 @@ combinations. this should be removed later #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#define CONFIG_ENV_SECT_SIZE 0x20000 #endif #define CONFIG_LOADS_ECHO /* echo on for serial download */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 1cfb2c2..92913c8 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -20,25 +20,73 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#endif + +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 8192 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ @@ -130,6 +178,10 @@ (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) #define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NO_FLASH +#endif + /* * IFC Definitions */ @@ -183,7 +235,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) /* 8Bit NAND Flash - K9F1G08U0B */ #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ @@ -215,6 +267,23 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 /* Set up IFC registers for boot location NOR/NAND */ +#ifdef CONFIG_NAND +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR @@ -230,6 +299,7 @@ #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif /* CPLD on IFC, selected by CS2 */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 @@ -269,7 +339,44 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) + +/* + * Config the L2 Cache as L2 SRAM + */ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) +#else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif +#endif +#endif /* Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -278,6 +385,10 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif + #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV @@ -364,13 +475,19 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 #endif +#elif defined(CONFIG_NAND) +#define CONFIG_ENV_IS_IN_NAND +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) #else -#define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_RANGE CONFIG_ENV_SIZE +#endif +#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE #else +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 #endif diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index ba5dba5..27539d2 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -59,7 +59,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ #define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 0bb22be..5b872f6 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOM405 1 /* ...on a VOM405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC8000 diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 764ca22..a75c52f 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_CPC45 1 diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 85720a5..05106cd 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 793ee75..34252d4 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 53cf498..bf85439 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #undef CONFIG_CPCI405_6U /* enable this for 6U boards */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index ce31032..7d58e9d 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #define CONFIG_CPCI405AB 1 /* ...and special AB version */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index f09fcb0..c2598a3 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index ae36411..25365f7 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCIISER4 1 /* ...on a CPCIISER4 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index a4ce6c3..788fa0f 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -19,7 +19,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC405 family */ /* * Note: I make an "image" from U-Boot itself, which prefixes 0x40 diff --git a/include/configs/CU824.h b/include/configs/CU824.h index 6864027..dc98a56 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_CU824 1 diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 74e79e2..68e4a7f 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DP405 1 /* ...on a DP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 433077d..9be2310 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -17,7 +17,6 @@ * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DU405 1 /* ...on a DU405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 71be122..be5494b 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -21,7 +21,6 @@ */ #define CONFIG_DU440 1 /* Board is esd DU440 */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333400 /* external freq to pll */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h deleted file mode 100644 index 208b599..0000000 --- a/include/configs/EXBITGEN.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_EXBITGEN 1 /* on a Exbit Generic board */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ - -/* I2C configuration */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ - -/* environment is in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 /* 1010110 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit internal addressing */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 /* ... and 1 bit in I2C address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 4 bytes per page */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 40 /* write takes up to 40 msec */ -#define CONFIG_ENV_OFFSET 4 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 350 /* that is 350 bytes only! */ -#endif - -#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ -/* Explanation: - autbooting is altogether disabled and cannot be - enabled if CONFIG_BOOTDELAY is negative. - If you want shorter bootdelay, then - - "setenv bootdelay <delay>" to the proper value -*/ - -#define CONFIG_BOOTCOMMAND "bootm 20400000 20800000" - -#define CONFIG_BOOTARGS "root=/dev/ram " \ - "ramdisk_size=32768 " \ - "console=ttyS0,115200 " \ - "ram=128M debug" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_PPC4xx_EMAC -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/* UART configuration */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* Default baud rate */ -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#undef CONFIG_PCI /* no pci support */ - -/*----------------------------------------------------------------------- - * External peripheral base address - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000 -#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000 -#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH0_BASE 0xFFF80000 -#define CONFIG_SYS_FLASH0_SIZE 0x00080000 -#define CONFIG_SYS_FLASH1_BASE 0x20000000 -#define CONFIG_SYS_FLASH1_SIZE 0x02000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_RAMSTART -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 5 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x00060000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x00010000 /* see README - env sector total size */ -#endif - -/* On Chip Memory location/size */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -/* Global info and initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif -#endif /* __CONFIG_H */ diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 5c537ce..0c66092 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_G2000 1 /* ...on a PLU405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 26b3bdf..033dcbf 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -24,7 +24,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_HH405 1 /* ...on a HH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 62a7f93..e0a233b 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -22,7 +22,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_HIDDEN_DRAGON 1 diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 5e16653..1783b9f 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_HUB405 1 /* ...on a HUB405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index bbfee7d..6a3a11c 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -13,7 +13,6 @@ /* High-level system configuration options */ #define CONFIG_BOOKE /* Power/PowerPC Book-E */ #define CONFIG_E500 /* e500 (Power ISA v2.03 with SPE) */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 family */ #define CONFIG_FSL_ELBC /* FreeScale Enhanced LocalBus Cntlr */ #define CONFIG_FSL_LAW /* FreeScale Local Access Window */ #define CONFIG_P2020 /* FreeScale P2020 */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 52368f8..1861aa8 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -13,8 +13,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ /* diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 5738ea9..5cc2557 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -20,8 +20,6 @@ #define CONFIG_JSE 1 /* JSE has a PPC405GPr */ #define CONFIG_405GP 1 - /* ... which is a 4xxx series */ -#define CONFIG_4x 1 /* ... with a 33MHz OSC. connected to the SysCLK input */ #define CONFIG_SYS_CLK_FREQ 33333333 /* ... with on-chip memory here (4KBytes) */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 39eb2ef..546b725 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -23,7 +23,6 @@ #define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index 8a40029..3dcea0b 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -16,7 +16,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC837x 1 #define CONFIG_MPC8377 1 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 6715435..69ab5bb 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -89,7 +89,6 @@ #define CONFIG_METROBOX 1 /* Board is Metrobox */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 6042a1e..68824fd 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -17,7 +17,6 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_MIP405 1 /* ...on a MIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 1bf1bf8..e84d12f 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -29,7 +29,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_MOUSSE 1 diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 0131b9c..bf974fd 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 07719e9..69b2cb1 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -14,7 +14,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 #define CONFIG_MPC8313ERDB 1 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index aedb529..3dd52ce 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -35,7 +35,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC831x 1 /* MPC831x CPU family */ #define CONFIG_MPC8315 1 /* MPC8315 CPU specific */ #define CONFIG_MPC8315ERDB 1 /* MPC8315ERDB board specific */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index c4c771b..65a63e2 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -14,7 +14,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f5b6202..1735b3c 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -12,7 +12,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 7640d06..6b7d648 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index ffb9a15..398918a 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -47,7 +47,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC83xx 1 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index d4c82cd..aefde74 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -14,7 +14,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 01e7ac7..1b8bad1 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -19,7 +19,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360ERDK 1 /* MPC8360ERDK board specific */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index f52e77a..695e47b 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -12,7 +12,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 938f7ab..1d1f4c0 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XERDB 1 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9b7cc64..57bf04f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -56,7 +56,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8536 1 #define CONFIG_MPC8536DS 1 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 2d42b25..37c2b94 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -21,7 +21,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_MPC8540 1 /* MPC8540 specific */ #define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index b9ad034..5d229a0 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -16,7 +16,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8541 1 /* MPC8541 specific */ #define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 90fc2da..dade6d3 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -14,7 +14,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8544 1 #define CONFIG_MPC8544DS 1 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 5fff1e2..190c668 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -20,7 +20,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 23c6b07..5263ffc 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -16,7 +16,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8555 1 /* MPC8555 specific */ #define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 44b7679..ac78d48 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -21,7 +21,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ #define CONFIG_MPC8560 1 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 4f438a8..02a5acf 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -13,7 +13,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index d877e8b..33cadb9 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -13,7 +13,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8569 1 /* MPC8569 specific */ #define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 44d83a2..f457719 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -44,7 +44,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8572 1 #define CONFIG_MPC8572DS 1 #define CONFIG_MP 1 /* support multiple processors */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index f930fcd..e6d570a 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -14,7 +14,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8610 1 /* MPC8610 specific */ #define CONFIG_MPC8610HPCD 1 /* MPC8610HPCD board specific */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 65d61c2..7443ace 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -17,7 +17,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ #define CONFIG_MP 1 /* support multiple processors */ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index b24f6ee..c5c9290 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -25,7 +25,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_MUSENKI 1 diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 9d49de7..99e4e90 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -13,7 +13,6 @@ #include <version.h> -#define CONFIG_MPC5xxx 1 #define CONFIG_MPC5200 1 #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index efdf1aa..30af691 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC834x 1 #define CONFIG_MPC8343 1 diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 4100b85..aa2d9c0 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -40,7 +40,6 @@ #define ERR_LED(code) #endif -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_MVBLUE 1 diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h deleted file mode 100644 index 73cd2a9..0000000 --- a/include/configs/MVS1.h +++ /dev/null @@ -1,384 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_MVS 1 /* ...on a MVsensor module */ -#define CONFIG_MVS_16BIT_FLASH /* ...with 16-bit flash access */ -#define CONFIG_8xx_GCLK_FREQ 50000000/* ... and a 50 MHz CPU */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#undef CONFIG_8xx_CONS_SMC1 /* Console is *NOT* on SMC1 */ -#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 /* console baudrate */ -#define CONFIG_BOOTDELAY 5 /* autoboot after this many seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo To mount root over NFS use \"run bootnet\";" \ - "echo To mount root from FLASH use \"run bootflash\";" \ - "echo" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw" -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_WATCHDOG /* watchdog disabled/enabled */ - -#undef CONFIG_STATUS_LED /* Status LED disabled/enabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_VENDOREX - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_RUN - - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_LONGHELP /* undef to save memory */ - -#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot ?? */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 - -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 192 kB for Monitor */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip (for AMD320DB chip) */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* 4MB flash - use bottom sectors of a bottom boot sector flash (16 bit access) */ -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector (bottom boot sector) */ -#define CONFIG_ENV_SIZE 0x2000 /* Used Size of Environment Sector 8k */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PCCARD 0 /* **DON'T** Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 0 /* max. no. of IDE buses */ -#define CONFIG_SYS_IDE_MAXDEVICE 0 /* max. no. of drives per IDE bus */ - - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#undef FLASH_BASE1_PRELIM - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - - -/* - * FLASH timing: - */ -/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_2_CLK | OR_EHTR | OR_BI) -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -/* -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \ - OR_SCY_5_CLK | OR_EHTR) -*/ - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#ifdef CONFIG_MVS_16BIT_FLASH -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) -#else -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V ) -#endif - -#undef CONFIG_SYS_OR1_REMAP -#undef CONFIG_SYS_OR1_PRELIM -#undef CONFIG_SYS_BR1_PRELIM -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#undef SDRAM_BASE3_PRELIM -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#undef CONFIG_SYS_OR3_PRELIM -#undef CONFIG_SYS_BR3_PRELIM - - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ -#define CONFIG_SYS_MAMR_PTA 98 - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index f69b9a8..bb565b6 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -13,7 +13,6 @@ #include <version.h> -#define CONFIG_MPC5xxx 1 #define CONFIG_MPC5200 1 #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 7baba93..4680afe 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_OCRTC 1 /* ...on a OCRTC board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h deleted file mode 100644 index 5a9bee3..0000000 --- a/include/configs/ORSG.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_ORSG 1 /* ...on a ORSG board */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ - -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND "go fff00100" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ELF -#define CONFIG_CMD_BSP -#define CONFIG_CMD_EEPROM - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */ -#undef CONFIG_PCI_PNP /* no pci plug-and-play */ - /* resource configuration */ - -#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFD0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#if 0 /* Use NVRAM for environment variables */ -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */ -#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */ - -#else /* Use EEPROM for environment variables */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */ - /* total size of a CAT24WC08 is 1024 bytes */ -#endif - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC08) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (Flash Bank 1) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x92015480 -#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 2 (PLD - FPGA-boot) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (PLD - OSL) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 4 (Spartan2 1) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/ - -/* Memory Bank 5 (Spartan2 2) initialization */ -#define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/ - -/* Memory Bank 6 (Virtex 1) initialization */ -#define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/ - -/* Memory Bank 7 (Virtex 2) initialization */ -#define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */ - /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/ -#define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/ - - -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index ea5cb65..f82fbca 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -23,13 +23,13 @@ #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_NAND @@ -46,7 +46,7 @@ #define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 #define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 @@ -57,11 +57,11 @@ #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ #define CONFIG_RAMBOOT_NAND #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -77,7 +77,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_FSL_IFC /* Enable IFC Support */ #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ @@ -661,18 +660,14 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_SIZE (16 * 1024) #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ #endif -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 934a6cb..6255b0a 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -32,7 +32,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) @@ -62,7 +62,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) @@ -96,7 +96,7 @@ #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) @@ -122,13 +122,12 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ #define CONFIG_P1022 #define CONFIG_P1022DS #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -653,11 +652,7 @@ #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 7de6814..b41cb4a 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -11,7 +11,7 @@ #define __CONFIG_H #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_SYS_MONITOR_BASE @@ -25,7 +25,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_P1023 #define CONFIG_MP /* support multiple processors */ @@ -260,11 +259,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ @@ -365,7 +360,7 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xeff40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 11c74ff..b513545 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -32,7 +32,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_SYS_MONITOR_BASE @@ -46,7 +46,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx #define CONFIG_P1023 #define CONFIG_P1023RDS #define CONFIG_MP /* support multiple processors */ @@ -220,7 +219,7 @@ extern unsigned long get_clock_freq(void); /* NAND boot: 4K NAND loader config */ #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + CONFIG_SYS_NAND_SPL_SIZE) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) @@ -386,7 +385,7 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_RAMBOOT_NAND) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000) @@ -394,11 +393,7 @@ extern unsigned long get_clock_freq(void); #endif #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif @@ -506,7 +501,7 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x1f00000 diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 85cb076..32ed0c2 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -46,17 +46,17 @@ #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH 1 #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -70,7 +70,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/ #define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ @@ -267,7 +266,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* NAND boot: 4K NAND loader config */ #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) #define CONFIG_SYS_NAND_U_BOOT_START (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) @@ -495,7 +494,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_RAMBOOT_NAND) #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) + #define CONFIG_ENV_OFFSET ((768*1024)+CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION @@ -513,11 +512,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif #else #define CONFIG_ENV_IS_IN_FLASH 1 - #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 - #define CONFIG_ENV_ADDR 0xfff80000 - #else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index ce3c762..d414b84 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -29,7 +29,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/ #define CONFIG_P2020 1 #define CONFIG_P2020COME 1 #define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index ada6c7b..3d0b5c2 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -20,27 +20,26 @@ #ifdef CONFIG_SDCARD #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f40000 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_SYS_TEXT_BASE 0xf8f40000 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc #endif /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_P2020 1 #define CONFIG_P2020DS 1 #define CONFIG_MP 1 /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -578,11 +577,7 @@ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH 1 -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index ee71252..47c6384 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -18,8 +18,9 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -36,11 +37,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -93,12 +93,12 @@ #define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_ENV_OFFSET (512 * 1097) + #define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -511,14 +511,14 @@ unsigned long get_board_sys_clk(unsigned long dummy); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -531,7 +531,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 3b5c73e..0989407 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -20,7 +20,6 @@ * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PCI405 1 /* ...on a PCI405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFD0000 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 29888b4..a6f505a 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -17,7 +17,6 @@ * (easy to change) ***********************************************************/ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PIP405 1 /* ...on a PIP405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 947b3d8..8705161 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PLU405 1 /* ...on a PLU405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 557a8ba..de46216 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -14,8 +14,7 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_PM520 1 /* ... on PM520 board */ +#define CONFIG_PM520 1 /* PM520 board */ #define CONFIG_SYS_TEXT_BASE 0xfff00000 diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 9fab4b2..c68d9a6 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -13,7 +13,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PMC405 1 /* ...on a PMC405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 0984095..94b9547 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PMC405DE 1 /* ...on a PMC405DE board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index efe6960..fd39109 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -24,7 +24,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF90000 diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 1b17afa..e277d0d 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -59,7 +59,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ #define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 40fb63d..46157cc 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -16,7 +16,6 @@ #define CONFIG_NAND_U_BOOT #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index 8a689b3..2c0cb89 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_SANDPOINT 1 diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index a17f5ad..2664d5b 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_SANDPOINT 1 diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 7d0bc04..75ea125 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -32,8 +32,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg #endif /* High Level Configuration Options */ @@ -41,11 +41,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -93,12 +92,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -167,7 +166,7 @@ unsigned long get_board_ddr_clk(void); /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR3 @@ -414,9 +413,9 @@ unsigned long get_board_ddr_clk(void); /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ -#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 @@ -583,17 +582,17 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -612,9 +611,8 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 -#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 +#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index d721139..7cfda50 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -40,11 +40,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -80,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -92,12 +87,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -203,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -387,6 +383,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -521,17 +521,17 @@ #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -544,13 +544,12 @@ #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -628,9 +627,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index 2c02d9d..ed9ca8a 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -40,11 +40,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -80,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -92,12 +87,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -203,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -395,6 +391,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -529,17 +529,17 @@ #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -552,8 +552,11 @@ #endif #ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 + #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -632,9 +635,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/T2080QDS.h b/include/configs/T2080QDS.h index bff001f..9bd0fe2 100644 --- a/include/configs/T2080QDS.h +++ b/include/configs/T2080QDS.h @@ -27,7 +27,6 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #define CONFIG_ENABLE_36BIT_PHYS @@ -45,8 +44,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg #endif #define CONFIG_SRIO_PCIE_BOOT_MASTER @@ -60,7 +59,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -103,12 +102,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1105) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -544,14 +543,14 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -564,7 +563,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index 5e228f3..c81c457 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -98,7 +98,7 @@ #define CONFIG_SYS_INTERLAKEN #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -122,7 +122,7 @@ "bank_intlv=auto;" \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ +"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=t4240emu/ramdisk.uboot\0" \ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index c96df54..0d43c27 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -21,8 +21,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -64,12 +64,12 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -165,6 +165,9 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BRDCFG5 0x55 +#define QIXIS_MUX_SDHC 2 +#define QIXIS_MUX_SDHC_WIDTH8 1 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) #define CONFIG_SYS_CSPR3_EXT (0xf) @@ -376,14 +379,14 @@ unsigned long get_board_ddr_clk(void); #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -396,7 +399,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -466,6 +469,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_ESDHC_DETECT_QUIRK \ + (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \ + IS_SVR_REV(get_svr(), 1, 0)) +#define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \ + (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8)) #endif #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 90f7fc4..b4daedc 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #define CONFIG_TB5200 1 /* ... on a TB5200 base board */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 7aba009..92128b9 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -25,8 +25,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ /* diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 13500ee..69c0336 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 15cf2bd..6762e3a 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -16,7 +16,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x specific */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index acc4fdc..a58eeca 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -24,8 +24,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ /* diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 3d46afe..d4a4b68 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOH405 1 /* ...on a VOH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 319a9a2..c06897b 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -16,7 +16,6 @@ * (easy to change) */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_VOM405 1 /* ...on a VOM405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC8000 diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 00a24ab..895ad46 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC405 family */ #define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */ #define CONFIG_W7OLMC 1 /* ...specifically an LMC */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 8ed2fa2..2a38116 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC405 family */ #define CONFIG_W7O 1 /* ...on a Wave 7 Optics board */ #define CONFIG_W7OLMG 1 /* ...specifically an LMG */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index d2038e5..e4f0d19 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -19,7 +19,6 @@ #define CONFIG_IDENT_STRING " $Name: $" #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_WUH405 1 /* ...on a WUH405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index d151869..1e65cd1 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -13,8 +13,7 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_A3M071 /* ... on A3M071 board */ +#define CONFIG_A3M071 /* A3M071 board */ #define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 6473702..cc88ac1 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_A4M072 1 /* ... on A4M072 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index d6cef88..aa584b7 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -27,7 +27,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/acadia.h b/include/configs/acadia.h index f23d549..5f3b5f9 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -16,7 +16,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_ACADIA 1 /* Board is Acadia */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EZ 1 /* Specifc 405EZ support*/ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/aev.h b/include/configs/aev.h index 0eafb3c..2dffcfb 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -16,8 +16,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ #define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 08bba36..7849b22 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -14,7 +14,6 @@ #define CONFIG_ALPR 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 4de495a..f45deeb 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -69,6 +69,11 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +/* SPL USB Support */ +#define CONFIG_SPL_USB_SUPPORT +#define CONFIG_SPL_USB_HOST_SUPPORT +#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 + #define CONFIG_CMD_USB #define CONFIG_USB_HOST #define CONFIG_USB_XHCI @@ -94,26 +99,34 @@ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ + "usbroot=/dev/sda2 rw\0" \ + "usbrootfstype=ext4 rootwait\0" \ + "usbdev=0\0" \ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "usbargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${usbroot} " \ + "rootfstype=${usbrootfstype}\0" \ "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "loadbootenv=load ${devtype} ${devnum} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${ramroot} " \ "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ + "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=mmc dev ${mmcdev}; " \ + "setenv devnum ${mmcdev}; " \ "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ + "echo SD/MMC found on device ${devnum};" \ "if run loadbootenv; then " \ "echo Loaded environment from ${bootenv};" \ "run importbootenv;" \ @@ -129,6 +142,26 @@ "bootz ${loadaddr} - ${fdtaddr}; " \ "fi;" \ "fi;\0" \ + "usbboot=" \ + "setenv devnum ${usbdev}; " \ + "setenv devtype usb; " \ + "usb start ${usbdev}; " \ + "if usb dev ${usbdev}; then " \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadimage; then " \ + "run loadfdt; " \ + "echo Booting from usb ${usbdev}...; " \ + "run usbargs;" \ + "bootz ${loadaddr} - ${fdtaddr}; " \ + "fi;" \ + "fi\0" \ "findfdt="\ "if test $board_name = AM43EPOS; then " \ "setenv fdtfile am43x-epos-evm.dtb; fi; " \ @@ -139,7 +172,8 @@ #define CONFIG_BOOTCOMMAND \ "run findfdt; " \ - "run mmcboot;" + "run mmcboot;" \ + "run usbboot;" #endif #endif /* __CONFIG_AM43XX_EVM_H */ diff --git a/include/configs/aria.h b/include/configs/aria.h index b8d955a..c36cf33 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -31,7 +31,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 597bede..9c81e31 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100 diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index bd4dca5..066d09a 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -12,7 +12,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100MKII diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index fd76572..8f3fd0b 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATSTK1002 diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 2562460..63704b1 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7001 #define CONFIG_ATSTK1003 diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 8e32a10..331a60d 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7002 #define CONFIG_ATSTK1004 diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 9ce2264..bbe0aea 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_ATSTK1006 diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 326e3d6..97da1e9 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -17,7 +17,6 @@ #define CONFIG_BAMBOO 1 /* Board is BAMBOO */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h index 33e0496..8bd71c6 100644 --- a/include/configs/bluestone.h +++ b/include/configs/bluestone.h @@ -16,7 +16,6 @@ #define CONFIG_APM821XX 1 /* APM821XX series */ #define CONFIG_HOSTNAME bluestone -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 2b9c1c9..ea7b104 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -18,7 +18,6 @@ */ #define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/canmb.h b/include/configs/canmb.h index d929bde..c901793 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -13,8 +13,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */ /* diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index f6faeec..620a0f5 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -33,7 +33,6 @@ #endif #define CONFIG_440 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index ac3d6bd..7c693d6 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -11,8 +11,7 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ #define CONFIG_SYS_TEXT_BASE 0xfc000000 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 46d4f98..868813f 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -41,7 +41,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ #define CONFIG_P1022 #define CONFIG_CONTROLCENTERD #define CONFIG_MP /* support multiple processors */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 969b990..72432e4 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -15,15 +15,19 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg #if defined(CONFIG_P3041DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg #elif defined(CONFIG_P4080DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg #elif defined(CONFIG_P5040DS) -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg +#define CONFIG_SYS_FSL_PBL_RCW \ + $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif @@ -41,11 +45,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -91,12 +94,12 @@ #define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) +#define CONFIG_ENV_OFFSET (512 * 1658) #elif defined(CONFIG_NAND) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define CONFIG_ENV_IS_IN_REMOTE #define CONFIG_ENV_ADDR 0xffe20000 @@ -514,14 +517,14 @@ #elif defined(CONFIG_SDCARD) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1680) #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_QE_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -534,7 +537,7 @@ #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index db5cead..ec926fd 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -23,8 +23,7 @@ * (easy to change) */ -#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_CPCI5200 1 /* ... on CPCI5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 8a848be..a5c6f84 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CSB272 1 /* on a Cogent CSB272 board */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 5c03417..6aa98ef 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405GP CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CSB472 1 /* on a Cogent CSB472 board */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ #define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */ diff --git a/include/configs/debris.h b/include/configs/debris.h index 621f895..4631b86 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -94,7 +94,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_DEBRIS 1 diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index bc5853e..2a8cb39 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -20,8 +20,7 @@ * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */ /* diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index c527be4..31fc65d 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_DLVISION_10G 1 /* on a DLVision-10G board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index c97963a..1e86c55 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_DLVISION 1 /* on a Neo board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index ca9792c..940be1f 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 /* #define CONFIG_MPC8240 1 */ #define CONFIG_MPC8245 1 #define CONFIG_EXALION 1 diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 8dc654e..3f0ad69 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -17,7 +17,6 @@ #define CONFIG_EBONY 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index fc015e6..338d3dc 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_FAVR32_EZKIT diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 560363d..b555d82 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -23,8 +23,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ /* diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index a6f1aff..6810b3b 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -21,7 +21,6 @@ #define CONFIG_440GR 1 /* Specific PPC440GR support */ #define CONFIG_HOSTNAME gdppc440etx #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 938ee86..73534ad 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -11,7 +11,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 3f2fadb..4f0603a 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -8,7 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_HAMMERHEAD diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 1c74a2e..a1a88b5 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -13,9 +13,8 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_HMI1001 1 /* HMI1001 board */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_HMI1001 1 /* HMI1001 board */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/icon.h b/include/configs/icon.h index eafcf5a..bbe9b59 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -16,7 +16,6 @@ * High Level Configuration Options */ #define CONFIG_ICON 1 /* Board is icon */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 608d759..f321975 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -16,9 +16,8 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_INKA4X0 1 /* INKA4x0 board */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_INKA4X0 1 /* INKA4x0 board */ /* * Valid values for CONFIG_SYS_TEXT_BASE are: diff --git a/include/configs/intip.h b/include/configs/intip.h index d3d7a44..b56b3aa 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -30,7 +30,6 @@ #define CONFIG_IDENT_STRING " intip 0.06" #endif #define CONFIG_440 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/io.h b/include/configs/io.h index 2d67cfc..7f86767 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_IO 1 /* on a Io board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/io64.h b/include/configs/io64.h index 39ed285..6915b20 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -20,7 +20,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_IO64 1 /* Board is Io64 */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 788c715..d34b91d 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -9,7 +9,6 @@ #define __CONFIG_H #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_IOCON 1 /* on a IoCon board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index 408168b..41ced15 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -16,9 +16,8 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPX5200 1 /* ... on MPX5200 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_MPX5200 1 /* MPX5200 board */ +#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */ #define CONFIG_IPEK01 /* Motherboard is ipek01 */ #define CONFIG_SYS_TEXT_BASE 0xfc000000 diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 71e8ece..7dfaa22 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -13,8 +13,7 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* especially an MPC5200 */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_JUPITER 1 /* ... on Jupiter board */ /* diff --git a/include/configs/katmai.h b/include/configs/katmai.h index ca0df2d..fa72eb0 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -18,7 +18,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_KATMAI 1 /* Board is Katmai */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ #define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index d2acc28..0695d2d 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -19,7 +19,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_KILAUEA 1 /* Board is Kilauea */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 2a15ad4..a4e0f7c 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -99,11 +99,16 @@ #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ +#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS +#define CONFIG_KM_UBI_PART_BOOT_OPTS "" +#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */ + #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP /* one flash chip only called boot */ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ @@ -111,7 +116,8 @@ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ /* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS " " \ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=if test ${boot_bank} -eq 0; then; " \ diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index 47355ab..29c6f60 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -15,7 +15,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 50330cc..b9e1bac 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -15,6 +15,10 @@ #define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" +/* an additionnal option is required for UBI as subpage access is + * supported in u-boot */ +#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" + #define CONFIG_NAND_ECC_BCH /* common KM defines */ @@ -24,15 +28,14 @@ #define CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/keymile/kmp204x/pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/keymile/kmp204x/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ @@ -149,8 +152,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ #define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ -#define CONFIG_BOOTCOUNT_LIMIT - /* * Local Bus Definitions */ @@ -207,8 +208,13 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ +/* bootcounter in QRIO */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20) + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT @@ -264,7 +270,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ /* I2C */ + #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ #define CONFIG_SYS_NUM_I2C_BUSES 3 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ @@ -277,6 +286,12 @@ unsigned long get_board_sys_clk(unsigned long dummy); {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ } +#ifndef __ASSEMBLY__ +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#endif #define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ @@ -287,6 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index 4158c8d..8bb3571 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -13,6 +13,11 @@ #define CONFIG_HOSTNAME kmlion1 #define CONFIG_KM_BOARD_NAME "kmlion1" +/* KMCOGE4 */ +#elif defined(CONFIG_KMCOGE4) +#define CONFIG_HOSTNAME kmcoge4 +#define CONFIG_KM_BOARD_NAME "kmcoge4" + #else #error ("Board not supported") #endif @@ -42,6 +47,7 @@ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM /* Local bus app1 Options */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM +#endif /* App2 Local bus */ #define CONFIG_SYS_LBAPP2_BASE 0xE0000000 @@ -63,6 +69,5 @@ #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM /* Local bus app2 Options */ #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/korat.h b/include/configs/korat.h index 811ff99..5494a60 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -22,7 +22,6 @@ * High Level Configuration Options */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 #ifdef CONFIG_KORAT_PERMANENT diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 251327a..c352a1c 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -8,7 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_KVME080 1 diff --git a/include/configs/luan.h b/include/configs/luan.h index 67f75c7..15e4a7e 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -17,7 +17,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_LUAN 1 /* Board is Luan */ #define CONFIG_440SP 1 /* Specific PPC440SP support */ -#define CONFIG_4xx 1 /* PPC4xx family */ #define CONFIG_440 1 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index e9c8d8f..07ddfc4 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -22,7 +22,6 @@ #define CONFIG_LWMON5 1 /* Board is lwmon5 */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifdef CONFIG_LCD4_LWMON5 #define CONFIG_SYS_TEXT_BASE 0x01000000 /* SPL U-Boot TEXT_BASE */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index d6207eb..fd4c26e 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -19,7 +19,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_MAKALU 1 /* Board is Makalu */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */ diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index 21b17f6..60e8716 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -12,8 +12,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* MPC5200 CPU */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 1b9e2d0..a317782 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -14,8 +14,7 @@ */ #define CONFIG_MPC5200 -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MCC200 1 /* ... on MCC200 board */ +#define CONFIG_MCC200 1 /* MCC200 board */ /* * Valid values for CONFIG_SYS_TEXT_BASE are: diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index d415ecd..6c19817 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -29,7 +29,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 047e171..b270429 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -23,8 +23,7 @@ * (easy to change) */ -#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_MECP5200 1 /* ... on MECP5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index aa8d59d..486787e 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -200,7 +200,8 @@ # define CONFIG_SYS_MAX_FLASH_SECT 512 /* hardware flash protection */ # define CONFIG_SYS_FLASH_PROTECTION - +/* use buffered writes (20x faster) */ +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 # ifdef RAMENV # define CONFIG_ENV_IS_NOWHERE 1 # define CONFIG_ENV_SIZE 0x1000 @@ -446,4 +447,64 @@ # undef CONFIG_PHYLIB #endif +/* SPL part */ +#define CONFIG_SPL +#define CONFIG_CMD_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_BOARD_INIT + +#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" + +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_NOR_SUPPORT + +/* for booting directly linux */ +#define CONFIG_SPL_OS_BOOT + +#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \ + 0x60000) +#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ + 0x40000) +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ + 0x1000000) + +/* SP location before relocation, must use scratch RAM */ +/* BRAM start */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +/* BRAM size - will be generated */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +/* Stack pointer prior relocation, must situated at on-chip RAM */ +#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100 + +/* + * The main reason to do it in this way is that MALLOC_START + * can't be defined - common/spl/spl.c + */ +#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0) +# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \ + CONFIG_SYS_SPL_MALLOC_SIZE) +# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START +#else +# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END +#endif + +/* Just for sure that there is a space for stack */ +#define CONFIG_SPL_STACK_SIZE 0x100 + +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_INIT_RAM_ADDR - \ + GENERATED_GBL_DATA_SIZE - \ + CONFIG_SYS_SPL_MALLOC_SIZE - \ + CONFIG_SPL_STACK_SIZE) + #endif /* __CONFIG_H */ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 3d79239..fc7ecfa 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -10,7 +10,6 @@ #include <asm/arch/hardware.h> -#define CONFIG_AVR32 #define CONFIG_AT32AP #define CONFIG_AT32AP7000 #define CONFIG_MIMC200 diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 8071ac3..e8b0593 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -15,8 +15,7 @@ */ /* CPU and board */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 38337b4..7de245b 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -29,7 +29,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index de7a53a..4ae9afd 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -13,7 +13,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */ diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h deleted file mode 100644 index 4cac8ee..0000000 --- a/include/configs/mpq101.h +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Copyright 2011 Alex Dubov <oakad@yahoo.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Merury Computers MPQ101 board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_36BIT -# define CONFIG_PHYS_64BIT -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE /* BOOKE */ -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ -#define CONFIG_MPC8548 /* MPC8548 specific */ -#define CONFIG_MPQ101 /* MPQ101 board specific */ - -#define CONFIG_SYS_SRIO /* enable serial RapidIO */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ -#define CONFIG_FSL_LAW /* Use common FSL init code */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_PANIC_HANG - -/* - * Only possible on E500 Version 2 or newer cores. - */ -#define CONFIG_ENABLE_36BIT_PHYS - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_ADDR_MAP -# define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - - -#define CONFIG_SYS_CLK_FREQ 33000000 /* sysclk for MPC85xx */ - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR2 - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* Fixed 512MB DDR2 parameters */ -#define CONFIG_SYS_SDRAM_SIZE_LOG 29 /* DDR is 512MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102 -#define CONFIG_SYS_DDR_TIMING_3 0x00010000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x5c47a432 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x49352322 -#define CONFIG_SYS_DDR_TIMING_2 0x03984cce -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x14904cca -#define CONFIG_SYS_DDR_MODE_1 0x00400442 -#define CONFIG_SYS_DDR_MODE_1_PERF 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_2_PERF 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x08200100 -#define CONFIG_SYS_DDR_INTERVAL_PERF 0x06180100 -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_CONTROL 0xc3008000 /* Type = DDR2 */ -#define CONFIG_SYS_DDR_CONTROL2 0x04400000 - -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_START 0x0ff00000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0ffffffc - -/* - * RAM definitions - */ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ - - -/* - * FLASH on the Local Bus - * One bank, 128M, using the CFI driver. - */ -#define CONFIG_SYS_BOOT_BLOCK 0xf8000000 /* boot TLB block */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 128M */ - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_FLASH_BASE_PHYS 0xff8000000ull -#else -# define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -/* 0xf8001801 */ -#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | BR_PS_32 | BR_V) - -/* 0xf8006ff7 */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(128) | OR_GPCM_XAM | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 | OR_GPCM_TRLX \ - | OR_GPCM_EHTR | OR_GPCM_EAD) - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 -/* - * When initializing flash, if we cannot find the manufacturer ID, - * assume this is the AMD flash. - */ -#define CONFIG_ASSUME_AMD_FLASH - -/* - * Environment parameters - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_USE_PPCENV -#define ENV_IS_EMBEDDED -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */ -#define CONFIG_ENV_SIZE 0x800 - -/* Environment at the start of flash sector, before text. */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SIZE) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_TEXT_BASE 0xfffc0800 -#define CONFIG_SYS_LDSCRIPT "board/mercury/mpq101/u-boot.lds" - -/* - * Cypress CY7C67200 USB controller on the Local Bus. - * Not supported by u-boot at present. - */ -#define CONFIG_SYS_LBC_OPTION_BASE 0xf0000000 - -#ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_LBC_OPTION_BASE_PHYS 0xff0000000ull -#else -# define CONFIG_SYS_LBC_OPTION_BASE_PHYS CONFIG_SYS_LBC_OPTION_BASE -#endif - -/* 0xf0001001 */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBC_OPTION_BASE_PHYS) \ - | BR_PS_16 | BR_V) - -/* fffff002 */ -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(0x8000) | OR_GPCM_XAM \ - | OR_GPCM_BCTLD | OR_GPCM_EHTR) - -/* - * Serial Ports - */ -#define CONFIG_CONS_INDEX 2 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, 9600, \ - 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * I2C buses and peripherals - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* I2C RTC - M41T81 */ -#define CONFIG_RTC_M41T62 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* I2C EEPROM - 24C256 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_BUS_NUM 1 - -/* - * RapidIO MMU - */ -#ifdef CONFIG_SYS_SRIO -# define CONFIG_SRIO1 -# define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000 -# define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ - -# ifdef CONFIG_PHYS_64BIT -# define CONFIG_SYS_SRIO1_MEM_PHYS 0xfc0000000ull -# else -# define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_VIRT -# endif -#endif - -/* - * Ethernet - */ -#ifdef CONFIG_TSEC_ENET - -# define CONFIG_MII /* MII PHY management */ -# define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ - -# define CONFIG_TSEC1 -# define CONFIG_TSEC1_NAME "eTSEC0" -# define TSEC1_PHY_ADDR 0x10 -# define TSEC1_PHYIDX 0 -# define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC2 -# define CONFIG_TSEC2_NAME "eTSEC1" -# define TSEC2_PHY_ADDR 0x11 -# define TSEC2_PHYIDX 0 -# define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC3 -# define CONFIG_TSEC3_NAME "eTSEC2" -# define TSEC3_PHY_ADDR 0x12 -# define TSEC3_PHYIDX 0 -# define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -# define CONFIG_TSEC4 -# define CONFIG_TSEC4_NAME "eTSEC3" -# define TSEC4_PHY_ADDR 0x13 -# define TSEC4_PHYIDX 0 -# define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -/* Options are: eTSEC[0-3] */ -# define CONFIG_ETHPRIME "eTSEC0" -# define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ -#endif - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_JFFS2 - -/* - * Miscellaneous configurable options - */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -#define CONFIG_FIT /* new uImage format support */ -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "MPQ-101=> " /* Monitor Command Prompt */ - -/* Console I/O Buffer Size */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 -#else -# define CONFIG_SYS_CBSIZE 256 -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) - -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Basic Environment Configuration - */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ - -/*default location for tftp and bootm*/ -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -#endif /* __CONFIG_H */ diff --git a/include/configs/munices.h b/include/configs/munices.h index 3bda8eb..e65a14a 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -11,8 +11,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CONFIG_MUNICES 1 /* ... on MUNICes board */ diff --git a/include/configs/neo.h b/include/configs/neo.h index 62ea8ec..d549985 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -10,7 +10,6 @@ #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_NEO 1 /* on a Neo board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index ce08454..18714ea 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -16,7 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index f3fb585..4ff2f05 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -26,7 +26,6 @@ #define CONFIG_OCOTEA 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index c6df11b..117484d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -161,7 +161,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) @@ -191,7 +191,7 @@ #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SPL_PAD_TO 0x18000 #define CONFIG_SPL_MAX_SIZE (96 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) @@ -221,7 +221,7 @@ #define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) @@ -247,7 +247,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -265,7 +265,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 -#define CONFIG_MPC85xx #define CONFIG_MP @@ -842,11 +841,7 @@ #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 9837100..601bac7 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -24,11 +24,11 @@ #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -42,7 +42,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 -#define CONFIG_MPC85xx #define CONFIG_MP @@ -407,11 +406,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif #else #define CONFIG_ENV_IS_IN_FLASH -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 -#else #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 1fdd602..225567b 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -20,7 +20,6 @@ #define CONFIG_P3P440 1 /* Board is P3P440 */ #define CONFIG_440GP 1 /* Specifc GP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 5c61889..31a93c8 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -20,8 +20,7 @@ High Level Configuration Options (easy to change) -----------------------------------------------------------------------------*/ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ #define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ /* FEC configuration and IDE */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 5a5fe7f..e6e06f2 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -23,7 +23,6 @@ #define CONFIG_PCS440EP 1 /* Board is PCS440EP */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 2a54e5c..553eb8f 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -30,7 +30,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_SYS_TEXT_BASE 0xF0000000 diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 327be3f..be76478 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -22,8 +22,7 @@ * (easy to change) */ -#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_PF5200 1 /* ... on PF5200 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 20d6178..e91e805 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -15,7 +15,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_QUAD100HD 1 /* Board is Quad100hd */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EP 1 /* Specifc 405EP support*/ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/redwood.h b/include/configs/redwood.h index c8bd02e..84d1e58 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -12,7 +12,6 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC460 family */ #define CONFIG_460SX 1 /* ... PPC460 family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 2fd1dc4..69dc210 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -17,7 +17,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_SBC405 1 /* ...on a WR SBC405 board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index b7f83e0..2516a3e 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -19,7 +19,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 4912d69..f28f350 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -38,7 +38,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_SBC8548 1 /* SBC8548 board specific */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 78f8219..8eb7276 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -21,7 +21,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_SBC8641D 1 /* SBC8641D board specific */ #define CONFIG_MP 1 /* support multiple processors */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 9a11150..14e033d 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -43,7 +43,6 @@ */ #define CONFIG_SC3 1 -#define CONFIG_4xx 1 #define CONFIG_405GP 1 #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index d2dedac..0e21ee3 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -27,7 +27,6 @@ #define CONFIG_HOSTNAME rainier #endif #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/socrates.h b/include/configs/socrates.h index fd590e4..c654a0e 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -25,7 +25,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ #define CONFIG_MPC8544 1 #define CONFIG_SOCRATES 1 diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 2a9c9a3..5fb40eb 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -22,7 +22,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/ #define CONFIG_MPC8560 1 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index d0cb68a..914d821 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -22,7 +22,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ #define CONFIG_MPC8560 1 diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 9ab9924..502e795 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -16,7 +16,6 @@ */ #define CONFIG_460GT 1 /* Specific PPC460GT */ #define CONFIG_440 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 54a5e3e..bd324ba 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -17,11 +17,10 @@ #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 4ebaf2e..5c0ce7a 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -13,7 +13,6 @@ #define CONFIG_405EP 1 /* this is a PPC405 CPU */ -#define CONFIG_4xx 1 /* member of PPC4xx family */ #define CONFIG_TAIHU 1 /* on a taihu board */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 3dbfc6a..3d5c351 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -18,7 +18,6 @@ #define CONFIG_TAISHAN 1 /* Board is taishan */ #define CONFIG_440GX 1 /* Specifc GX support */ #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h deleted file mode 100644 index 2901ed1..0000000 --- a/include/configs/tb0229.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * (C) Copyright 2003 - * Masami Komiya <mkomiya@sonare.it> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Config header file for TANBAC TB0229 board using an VR4131 CPU module - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ -#define CONFIG_TB0229 1 /* on a TB0229 Board */ - -#ifndef CPU_CLOCK_RATE -#define CPU_CLOCK_RATE 200000000 /* 200 MHz clock for the MIPS core */ -#endif -#define CPU_TCLOCK_RATE 16588800 /* 16.5888 MHz for TClock */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"boot\\\" for the network boot using DHCP, TFTP and NFS;" \ - "echo Type \\\"run netboot_initrd\\\" for the network boot with initrd;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo Type \\\"run flash_local\\\" to mount local root filesystem;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netboot=dhcp;tftp;run netargs; bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs ip=dhcp\0" \ - "localargs=setenv bootargs root=1F02 ip=dhcp\0" \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "read-only=readonly\0" \ - "netargs=run nfsargs addmisc\0" \ - "flash_nfs=run nfsargs addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_local=run localargs addmisc;" \ - "bootm ${kernel_addr}\0" \ - "netboot_initrd=dhcp;tftp;tftp 80600000 initrd;" \ - "setenv bootargs root=/dev/ram ramdisk_size=8192 ip=dhcp;"\ - "run addmisc;" \ - "bootm 80400000 80600000\0" \ - "rootpath=/export/miniroot-mipsel\0" \ - "autoload=no\0" \ - "kernel_addr=BFC60000\0" \ - "ramdisk_addr=B0100000\0" \ - "u-boot=u-boot.bin\0" \ - "bootfile=uImage\0" \ - "load=dhcp;tftp 80400000 ${u-boot}\0" \ - "load_kernel=dhcp;tftp 80400000 ${bootfile}\0" \ - "update_uboot=run load;" \ - "protect off BFC00000 BFC3FFFF;" \ - "erase BFC00000 BFC3FFFF;" \ - "cp.b 80400000 BFC00000 ${filesize}\0" \ - "update_kernel=run load_kernel;" \ - "erase BFC60000 BFD5FFFF;" \ - "cp.b 80400000 BFC60000 ${filesize}\0" \ - "initenv=erase bfc40000 bfc5ffff\0" \ - "" -/*#define CONFIG_BOOTCOMMAND "run flash_local" */ -#define CONFIG_BOOTCOMMAND "run netboot" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_PCI -#define CONFIG_CMD_ELF - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xbfc00000 /* Flash Bank #1 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xBFC40000 -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_NR_DRAM_BANKS 1 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 16 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 18432000 -#define CONFIG_SYS_NS16550_COM1 0xaf000800 - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI -#define CONFIG_PCI_PNP -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define CONFIG_RTL8139 - -#endif /* __CONFIG_H */ diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 8e6e246..5be62ec 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -30,7 +30,6 @@ * (easy to change) */ -#define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_UTX8245 1 diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 0c54435..7f6b0c7 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -12,7 +12,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_V38B 1 /* ...on V38B board */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 5cf4ae5..00787bb 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -17,7 +17,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC83xx 1 #define CONFIG_MPC831x 1 #define CONFIG_MPC8313 1 #define CONFIG_VE8313 1 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 7ecbafe..175311c 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -29,7 +29,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index a569182..8b803a2 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -18,7 +18,6 @@ */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_WALNUT 1 /* ...on a WALNUT board */ /* ...or on a SYCAMORE board */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h index 431e331..a0151fe 100644 --- a/include/configs/xilinx-ppc405.h +++ b/include/configs/xilinx-ppc405.h @@ -15,7 +15,6 @@ /* cpu parameter */ #define CONFIG_405 1 -#define CONFIG_4xx 1 #define CONFIG_XILINX_405 1 #include <configs/xilinx-ppc.h> diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h index 2ec3dd1..f457008 100644 --- a/include/configs/xilinx-ppc440.h +++ b/include/configs/xilinx-ppc440.h @@ -9,7 +9,6 @@ #define __CONFIG_GEN_H /*CPU*/ -#define CONFIG_4xx 1 #define CONFIG_440 1 #define CONFIG_XILINX_440 1 diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index eb193f8..ca322b2 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -18,7 +18,6 @@ #define CONFIG_XPEDITE1000 1 #define CONFIG_SYS_BOARD_NAME "XPedite1000" #define CONFIG_SYS_FORM_PMC 1 -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 88d7f88..cbf4b8e 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -14,7 +14,6 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC86xx 1 /* MPC86xx */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */ #define CONFIG_SYS_BOARD_NAME "XPedite5170" diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index f39d6f9..baa3039 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -16,7 +16,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 #define CONFIG_XPEDITE5200 1 #define CONFIG_SYS_BOARD_NAME "XPedite5200" diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index e1bdf90..bdf5576 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -16,7 +16,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8572 1 #define CONFIG_XPEDITE5370 1 #define CONFIG_SYS_BOARD_NAME "XPedite5370" diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 2328c7a..0b24f3e 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -16,7 +16,6 @@ */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_P2020 1 #define CONFIG_XPEDITE550X 1 #define CONFIG_SYS_BOARD_NAME "XPedite5500" diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 2dd742e..8508a80 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -23,7 +23,6 @@ #define CONFIG_HOSTNAME yellowstone #endif #define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ #define CONFIG_SYS_TEXT_BASE 0xFFF80000 diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 5d584fb..76717e4 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -18,7 +18,6 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ #define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index d8aeb37..4d7a7fc 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -15,7 +15,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_ZEUS 1 /* Board is Zeus */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EP 1 /* Specifc 405EP support*/ #define CONFIG_SYS_TEXT_BASE 0xFFFC0000 diff --git a/include/cramfs/cramfs_fs_sb.h b/include/cramfs/cramfs_fs_sb.h deleted file mode 100644 index bc23f94..0000000 --- a/include/cramfs/cramfs_fs_sb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _CRAMFS_FS_SB -#define _CRAMFS_FS_SB - -/* - * cramfs super-block data in memory - */ -struct cramfs_sb_info { - unsigned long magic; - unsigned long size; - unsigned long blocks; - unsigned long files; - unsigned long flags; -#ifdef CONFIG_CRAMFS_LINEAR - unsigned long linear_phys_addr; - char * linear_virt_addr; -#endif -}; - -#endif diff --git a/include/da9030.h b/include/da9030.h deleted file mode 100644 index 275d681..0000000 --- a/include/da9030.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* DA9030 register definitions */ -#define CID 0x00 -#define EVENT_A 0x01 -#define EVENT_B 0x02 -#define EVENT_C 0x03 -#define STATUS 0x04 -#define IRQ_MASK_A 0x05 -#define IRQ_MASK_B 0x06 -#define IRQ_MASK_C 0x07 -#define SYS_CONTROL_A 0x08 -#define SYS_CONTROL_B 0x09 -#define FAULT_LOG 0x0A -#define LDO_10_11 0x10 -#define LDO_15 0x11 -#define LDO_14_16 0x12 -#define LDO_18_19 0x13 -#define LDO_17_SIMCP0 0x14 -#define BUCK2_DVC1 0x15 -#define BUCK2_DVC2 0x16 -#define REG_CONTROL_1_17 0x17 -#define REG_CONTROL_2_18 0x18 -#define USBPUMP 0x19 -#define SLEEP_CONTROL 0x1A -#define STARTUP_CONTROL 0x1B -#define LED1_CONTROL 0x20 -#define LED2_CONTROL 0x21 -#define LED3_CONTROL 0x22 -#define LED4_CONTROL 0x23 -#define LEDPC_CONTROL 0x24 -#define WLED_CONTROL 0x25 -#define MISC_CONTROLA 0x26 -#define MISC_CONTROLB 0x27 -#define CHARGE_CONTROL 0x28 -#define CCTR_CONTROL 0x29 -#define TCTR_CONTROL 0x2A -#define CHARGE_PULSE 0x2B - -/* ... some missing ...*/ - -#define LDO1 0x90 -#define LDO2_3 0x91 -#define LDO4_5 0x92 -#define LDO6_SIMCP 0x93 -#define LDO7_8 0x94 -#define LDO9_12 0x95 -#define BUCK 0x96 -#define REG_CONTROL_1_97 0x97 -#define REG_CONTROL_2_98 0x98 -#define REG_SLEEP_CONTROL1 0x99 -#define REG_SLEEP_CONTROL2 0x9A -#define REG_SLEEP_CONTROL3 0x9B -#define ADC_MAN_CONTROL 0xA0 -#define ADC_AUTO_CONTROL 0xA1 -#define VBATMON 0xA2 -#define VBATMONTXMON 0xA3 -#define TBATHIGHP 0xA4 -#define TBATHIGHN 0xA5 -#define TBATLOW 0xA6 -#define MAN_RES 0xB0 -#define VBAT_RES 0xB1 -#define VBATMIN_RES 0xB2 -#define VBATMINTXON_RES 0xB3 -#define ICHMAX_RES 0xB4 -#define ICHMIN_RES 0xB5 -#define ICHAVERAGE_RES 0xB6 -#define VCHMAX_RES 0xB7 -#define VCHMIN_RES 0xB8 -#define TBAT_RES 0xB9 -#define ADC_IN4_RES 0xBA - -#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */ -#define STATUS_PWREN1 (1<<1) /* PWREN1 value */ -#define STATUS_EXTON (1<<2) /* EXTON value */ -#define STATUS_CHDET (1<<3) /* Charger detection status */ -#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */ -#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */ -#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */ -#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */ - -#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1 -#define SYS_CONTROL_A_SHUT_DOWN (1<<1) -#define SYS_CONTROL_A_HWRES_ENABLE (1<<2) -#define SYS_CONTROL_A_WDOG_ACTION (1<<3) -#define SYS_CONTROL_A_WATCHDOG (1<<7) - -#define MISC_CONTROLB_USB_INT_RISING (1<<2) -#define MISC_CONTROLB_SESSION_VALID_EN (1<<3) - -#define USB_PUMP_USBVE (1<<0) -#define USB_PUMP_USBVEP (1<<1) -#define USB_PUMP_SRP_DETECT (1<<2) -#define USB_PUMP_SESSION_VALID (1<<3) -#define USB_PUMP_VBUS_VALID_4_0 (1<<4) -#define USB_PUMP_VBUS_VALID_4_4 (1<<5) -#define USB_PUMP_EN_USBVE (1<<6) -#define USB_PUMP_EN_USBVEP (1<<7) diff --git a/include/dm9161.h b/include/dm9161.h deleted file mode 100644 index bd85e42..0000000 --- a/include/dm9161.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * NOTE: DAVICOM ethernet Physical layer - * - * Version: @(#)DM9161.h 1.0.0 01/10/2001 - * - * Authors: ATMEL Rousset - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -/* DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161 */ - -#define DM9161_BMCR 0 /* Basic Mode Control Register */ -#define DM9161_BMSR 1 /* Basic Mode Status Register */ -#define DM9161_PHYID1 2 /* PHY Idendifier Register 1 */ -#define DM9161_PHYID2 3 /* PHY Idendifier Register 2 */ -#define DM9161_ANAR 4 /* Auto_Negotiation Advertisement Register */ -#define DM9161_ANLPAR 5 /* Auto_negotiation Link Partner Ability Register */ -#define DM9161_ANER 6 /* Auto-negotiation Expansion Register */ -#define DM9161_DSCR 16 /* Specified Configuration Register */ -#define DM9161_DSCSR 17 /* Specified Configuration and Status Register */ -#define DM9161_10BTCSR 18 /* 10BASE-T Configuration and Satus Register */ -#define DM9161_MDINTR 21 /* Specified Interrupt Register */ -#define DM9161_RECR 22 /* Specified Receive Error Counter Register */ -#define DM9161_DISCR 23 /* Specified Disconnect Counter Register */ -#define DM9161_RLSR 24 /* Hardware Reset Latch State Register */ - - -/* --Bit definitions: DM9161_BMCR */ -#define DM9161_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */ -#define DM9161_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */ -#define DM9161_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */ -#define DM9161_AUTONEG (1 << 12) -#define DM9161_POWER_DOWN (1 << 11) -#define DM9161_ISOLATE (1 << 10) -#define DM9161_RESTART_AUTONEG (1 << 9) -#define DM9161_DUPLEX_MODE (1 << 8) -#define DM9161_COLLISION_TEST (1 << 7) - -/*--Bit definitions: DM9161_BMSR */ -#define DM9161_100BASE_TX (1 << 15) -#define DM9161_100BASE_TX_FD (1 << 14) -#define DM9161_100BASE_TX_HD (1 << 13) -#define DM9161_10BASE_T_FD (1 << 12) -#define DM9161_10BASE_T_HD (1 << 11) -#define DM9161_MF_PREAMB_SUPPR (1 << 6) -#define DM9161_AUTONEG_COMP (1 << 5) -#define DM9161_REMOTE_FAULT (1 << 4) -#define DM9161_AUTONEG_ABILITY (1 << 3) -#define DM9161_LINK_STATUS (1 << 2) -#define DM9161_JABBER_DETECT (1 << 1) -#define DM9161_EXTEND_CAPAB (1 << 0) - -/*--definitions: DM9161_PHYID1 */ -#define DM9161_PHYID1_OUI 0x606E -#define DM9161_LSB_MASK 0x3F - -/*--Bit definitions: DM9161_ANAR, DM9161_ANLPAR */ -#define DM9161_NP (1 << 15) -#define DM9161_ACK (1 << 14) -#define DM9161_RF (1 << 13) -#define DM9161_FCS (1 << 10) -#define DM9161_T4 (1 << 9) -#define DM9161_TX_FDX (1 << 8) -#define DM9161_TX_HDX (1 << 7) -#define DM9161_10_FDX (1 << 6) -#define DM9161_10_HDX (1 << 5) -#define DM9161_AN_IEEE_802_3 0x0001 - -/*--Bit definitions: DM9161_ANER */ -#define DM9161_PDF (1 << 4) -#define DM9161_LP_NP_ABLE (1 << 3) -#define DM9161_NP_ABLE (1 << 2) -#define DM9161_PAGE_RX (1 << 1) -#define DM9161_LP_AN_ABLE (1 << 0) - -/*--Bit definitions: DM9161_DSCR */ -#define DM9161_BP4B5B (1 << 15) -#define DM9161_BP_SCR (1 << 14) -#define DM9161_BP_ALIGN (1 << 13) -#define DM9161_BP_ADPOK (1 << 12) -#define DM9161_REPEATER (1 << 11) -#define DM9161_TX (1 << 10) -#define DM9161_RMII_ENABLE (1 << 8) -#define DM9161_F_LINK_100 (1 << 7) -#define DM9161_SPLED_CTL (1 << 6) -#define DM9161_COLLED_CTL (1 << 5) -#define DM9161_RPDCTR_EN (1 << 4) -#define DM9161_SM_RST (1 << 3) -#define DM9161_MFP SC (1 << 2) -#define DM9161_SLEEP (1 << 1) -#define DM9161_RLOUT (1 << 0) - -/*--Bit definitions: DM9161_DSCSR */ -#define DM9161_100FDX (1 << 15) -#define DM9161_100HDX (1 << 14) -#define DM9161_10FDX (1 << 13) -#define DM9161_10HDX (1 << 12) - -/*--Bit definitions: DM9161_10BTCSR */ -#define DM9161_LP_EN (1 << 14) -#define DM9161_HBE (1 << 13) -#define DM9161_SQUELCH (1 << 12) -#define DM9161_JABEN (1 << 11) -#define DM9161_10BT_SER (1 << 10) -#define DM9161_POLR (1 << 0) - - -/*--Bit definitions: DM9161_MDINTR */ -#define DM9161_INTR_PEND (1 << 15) -#define DM9161_FDX_MASK (1 << 11) -#define DM9161_SPD_MASK (1 << 10) -#define DM9161_LINK_MASK (1 << 9) -#define DM9161_INTR_MASK (1 << 8) -#define DM9161_FDX_CHANGE (1 << 4) -#define DM9161_SPD_CHANGE (1 << 3) -#define DM9161_LINK_CHANGE (1 << 2) -#define DM9161_INTR_STATUS (1 << 0) - - -/****************** function prototypes **********************/ -unsigned int dm9161_IsPhyConnected(AT91PS_EMAC p_mac); -unsigned char dm9161_GetLinkSpeed(AT91PS_EMAC p_mac); -unsigned char dm9161_AutoNegotiate(AT91PS_EMAC p_mac, int *status); -unsigned char dm9161_InitPhy(AT91PS_EMAC p_mac); diff --git a/include/faraday/ftsdc021.h b/include/faraday/ftsdc021.h deleted file mode 100644 index de8e250..0000000 --- a/include/faraday/ftsdc021.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * (C) Copyright 2013 Faraday Technology - * Dante Su <dantesu@faraday-tech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __FTSDC021_H -#define __FTSDC021_H - -int ftsdc021_sdhci_init(u32 regbase); - -#endif /* __FTSDC021_H */ diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index be6c107..58a6efd 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -12,6 +12,20 @@ #include <config.h> #include <common.h> + +#ifdef CONFIG_SYS_FSL_IFC_LE +#define ifc_in32(a) in_le32(a) +#define ifc_out32(a, v) out_le32(a, v) +#define ifc_in16(a) in_le16(a) +#elif defined(CONFIG_SYS_FSL_IFC_BE) +#define ifc_in32(a) in_be32(a) +#define ifc_out32(a, v) out_be32(a, v) +#define ifc_in16(a) in_be16(a) +#else +#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined +#endif + + /* * CSPR - Chip Select Property Register */ @@ -773,20 +787,22 @@ extern void init_early_memctl_regs(void); #define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR) -#define get_ifc_cspr_ext(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) -#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) -#define get_ifc_csor_ext(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) -#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) -#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) -#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) - -#define set_ifc_cspr_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) -#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) -#define set_ifc_csor_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) -#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) -#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) +#define get_ifc_cspr_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) +#define get_ifc_cspr(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) +#define get_ifc_csor_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) +#define get_ifc_csor(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) +#define get_ifc_amask(i) (ifc_in32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) +#define get_ifc_ftim(i, j) (ifc_in32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) + +#define set_ifc_cspr_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) +#define set_ifc_cspr(i, v) (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) +#define set_ifc_csor_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) +#define set_ifc_csor(i, v) (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) +#define set_ifc_amask(i, v) (ifc_out32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) #define set_ifc_ftim(i, j, v) \ - (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) + (ifc_out32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) enum ifc_chip_sel { IFC_CS0, diff --git a/include/ks8721.h b/include/ks8721.h deleted file mode 100644 index 90ed178..0000000 --- a/include/ks8721.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * NOTE: MICREL ethernet Physical layer - * - * Version: KS8721.h - * - * Authors: Eric Benard (based on dm9161.h) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* MICREL PHYSICAL LAYER TRANSCEIVER KS8721 */ - -#define KS8721_BMCR 0 -#define KS8721_BMSR 1 -#define KS8721_PHYID1 2 -#define KS8721_PHYID2 3 -#define KS8721_ANAR 4 -#define KS8721_ANLPAR 5 -#define KS8721_ANER 6 -#define KS8721_RECR 15 -#define KS8721_MDINTR 27 -#define KS8721_100BT 31 - -/* --Bit definitions: KS8721_BMCR */ -#define KS8721_RESET (1 << 15) -#define KS8721_LOOPBACK (1 << 14) -#define KS8721_SPEED_SELECT (1 << 13) -#define KS8721_AUTONEG (1 << 12) -#define KS8721_POWER_DOWN (1 << 11) -#define KS8721_ISOLATE (1 << 10) -#define KS8721_RESTART_AUTONEG (1 << 9) -#define KS8721_DUPLEX_MODE (1 << 8) -#define KS8721_COLLISION_TEST (1 << 7) -#define KS8721_DISABLE (1 << 0) - -/*--Bit definitions: KS8721_BMSR */ -#define KS8721_100BASE_T4 (1 << 15) -#define KS8721_100BASE_TX_FD (1 << 14) -#define KS8721_100BASE_T4_HD (1 << 13) -#define KS8721_10BASE_T_FD (1 << 12) -#define KS8721_10BASE_T_HD (1 << 11) -#define KS8721_MF_PREAMB_SUPPR (1 << 6) -#define KS8721_AUTONEG_COMP (1 << 5) -#define KS8721_REMOTE_FAULT (1 << 4) -#define KS8721_AUTONEG_ABILITY (1 << 3) -#define KS8721_LINK_STATUS (1 << 2) -#define KS8721_JABBER_DETECT (1 << 1) -#define KS8721_EXTEND_CAPAB (1 << 0) - -/*--Bit definitions: KS8721_PHYID */ -#define KS8721_PHYID_OUI 0x0885 -#define KS8721_LSB_MASK 0x3F - -#define KS8721BL_MODEL 0x21 -#define KS8721_MODELMASK 0x3F0 -#define KS8721BL_REV 0x9 -#define KS8721_REVMASK 0xF - -/*--Bit definitions: KS8721_ANAR, KS8721_ANLPAR */ -#define KS8721_NP (1 << 15) -#define KS8721_ACK (1 << 14) -#define KS8721_RF (1 << 13) -#define KS8721_PAUSE (1 << 10) -#define KS8721_T4 (1 << 9) -#define KS8721_TX_FDX (1 << 8) -#define KS8721_TX_HDX (1 << 7) -#define KS8721_10_FDX (1 << 6) -#define KS8721_10_HDX (1 << 5) -#define KS8721_AN_IEEE_802_3 0x0001 - -/****************** function prototypes **********************/ -unsigned int ks8721_isphyconnected(AT91PS_EMAC p_mac); -unsigned char ks8721_getlinkspeed(AT91PS_EMAC p_mac); -unsigned char ks8721_autonegotiate(AT91PS_EMAC p_mac, int *status); -unsigned char ks8721_initphy(AT91PS_EMAC p_mac); diff --git a/include/linux/mtd/inftl-user.h b/include/linux/mtd/inftl-user.h deleted file mode 100644 index 45220ed..0000000 --- a/include/linux/mtd/inftl-user.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $ - * - * Parts of INFTL headers shared with userspace - * - */ - -#ifndef __MTD_INFTL_USER_H__ -#define __MTD_INFTL_USER_H__ - -#define OSAK_VERSION 0x5120 -#define PERCENTUSED 98 - -#define SECTORSIZE 512 - -/* Block Control Information */ - -struct inftl_bci { - uint8_t ECCsig[6]; - uint8_t Status; - uint8_t Status1; -} __attribute__((packed)); - -struct inftl_unithead1 { - uint16_t virtualUnitNo; - uint16_t prevUnitNo; - uint8_t ANAC; - uint8_t NACs; - uint8_t parityPerField; - uint8_t discarded; -} __attribute__((packed)); - -struct inftl_unithead2 { - uint8_t parityPerField; - uint8_t ANAC; - uint16_t prevUnitNo; - uint16_t virtualUnitNo; - uint8_t NACs; - uint8_t discarded; -} __attribute__((packed)); - -struct inftl_unittail { - uint8_t Reserved[4]; - uint16_t EraseMark; - uint16_t EraseMark1; -} __attribute__((packed)); - -union inftl_uci { - struct inftl_unithead1 a; - struct inftl_unithead2 b; - struct inftl_unittail c; -}; - -struct inftl_oob { - struct inftl_bci b; - union inftl_uci u; -}; - - -/* INFTL Media Header */ - -struct INFTLPartition { - __u32 virtualUnits; - __u32 firstUnit; - __u32 lastUnit; - __u32 flags; - __u32 spareUnits; - __u32 Reserved0; - __u32 Reserved1; -} __attribute__((packed)); - -struct INFTLMediaHeader { - char bootRecordID[8]; - __u32 NoOfBootImageBlocks; - __u32 NoOfBinaryPartitions; - __u32 NoOfBDTLPartitions; - __u32 BlockMultiplierBits; - __u32 FormatFlags; - __u32 OsakVersion; - __u32 PercentUsed; - struct INFTLPartition Partitions[4]; -} __attribute__((packed)); - -/* Partition flag types */ -#define INFTL_BINARY 0x20000000 -#define INFTL_BDTL 0x40000000 -#define INFTL_LAST 0x80000000 - -#endif /* __MTD_INFTL_USER_H__ */ diff --git a/include/linux/mtd/jffs2-user.h b/include/linux/mtd/jffs2-user.h deleted file mode 100644 index d508ef0..0000000 --- a/include/linux/mtd/jffs2-user.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $ - * - * JFFS2 definitions for use in user space only - */ - -#ifndef __JFFS2_USER_H__ -#define __JFFS2_USER_H__ - -/* This file is blessed for inclusion by userspace */ -#include <linux/jffs2.h> -#include <endian.h> -#include <byteswap.h> - -#undef cpu_to_je16 -#undef cpu_to_je32 -#undef cpu_to_jemode -#undef je16_to_cpu -#undef je32_to_cpu -#undef jemode_to_cpu - -extern int target_endian; - -#define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); }) -#define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); }) - -#define cpu_to_je16(x) ((jint16_t){t16(x)}) -#define cpu_to_je32(x) ((jint32_t){t32(x)}) -#define cpu_to_jemode(x) ((jmode_t){t32(x)}) - -#define je16_to_cpu(x) (t16((x).v16)) -#define je32_to_cpu(x) (t32((x).v32)) -#define jemode_to_cpu(x) (t32((x).m)) - -#endif /* __JFFS2_USER_H__ */ diff --git a/include/os.h b/include/os.h index b65fba4..d6d6e57 100644 --- a/include/os.h +++ b/include/os.h @@ -113,7 +113,7 @@ void *os_malloc(size_t length); * * \param ptr Pointer to memory block to free */ -void *os_free(void *ptr); +void os_free(void *ptr); /** * Reallocate previously-allocated memory to increase/decrease space diff --git a/include/smiLynxEM.h b/include/smiLynxEM.h deleted file mode 100644 index c020115..0000000 --- a/include/smiLynxEM.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * (C) Copyright 1997-2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * smiLynxEM.h - * Silicon Motion graphic interface for sm810/sm710/sm712 accelerator - * - * - * modification history - * -------------------- - * 04-18-2002 Rewritten for U-Boot <fgottschling@eltec.de>. - */ - -#ifndef _SMI_LYNX_EM_H_ -#define _SMI_LYNX_EM_H_ - -/* - * SMI 710/712 have 4MB internal RAM; SMI 810 2MB internal + 2MB external - */ -#define VIDEO_MEM_SIZE 0x400000 - -/* - * Supported video modes for SMI Lynx E/EM/EM+ - */ -#define VIDEO_MODES 7 -#define DUAL_800_600 0 /* SMI710:VGA1:75Hz (pitch=1600) */ - /* VGA2:60/120Hz (pitch=1600) */ - /* SMI810:VGA1:75Hz (pitch=1600) */ - /* VGA2:75Hz (pitch=1600) */ -#define DUAL_1024_768 1 /* VGA1:75Hz VGA2:73Hz (pitch=2048) */ -#define SINGLE_800_600 2 /* VGA1:75Hz (pitch=800) */ -#define SINGLE_1024_768 3 /* VGA1:75Hz (pitch=1024) */ -#define SINGLE_1280_1024 4 /* VGA1:75Hz (pitch=1280) */ -#define TV_MODE_CCIR 5 /* VGA1:50Hz (h=720;v=576;pitch=720) */ -#define TV_MODE_EIA 6 /* VGA1:60Hz (h=720;v=484;pitch=720) */ - - -/* - * ISA mapped regs - */ -#define SMI_INDX_C4 (pGD->isaBase + 0x03c4) /* index reg */ -#define SMI_DATA_C5 (pGD->isaBase + 0x03c5) /* data reg */ -#define SMI_INDX_D4 (pGD->isaBase + 0x03d4) /* index reg */ -#define SMI_DATA_D5 (pGD->isaBase + 0x03d5) /* data reg */ -#define SMI_INDX_CE (pGD->isaBase + 0x03ce) /* index reg */ -#define SMI_DATA_CF (pGD->isaBase + 0x03cf) /* data reg */ -#define SMI_LOCK_REG (pGD->isaBase + 0x03c3) /* unlock/lock ext crt reg */ -#define SMI_MISC_REG (pGD->isaBase + 0x03c2) /* misc reg */ -#define SMI_LUT_MASK (pGD->isaBase + 0x03c6) /* lut mask reg */ -#define SMI_LUT_START (pGD->isaBase + 0x03c8) /* lut start index */ -#define SMI_LUT_RGB (pGD->isaBase + 0x03c9) /* lut colors auto incr.*/ - - -/* - * Video processor control - */ -typedef struct { - unsigned int control; - unsigned int colorKey; - unsigned int colorKeyMask; - unsigned int start; - unsigned short offset; - unsigned short width; - unsigned int fifoPrio; - unsigned int fifoERL; - unsigned int YUVtoRGB; -} SmiVideoProc; - -/* - * Video window control - */ -typedef struct { - unsigned short top; - unsigned short left; - unsigned short bottom; - unsigned short right; - unsigned int srcStart; - unsigned short width; - unsigned short offset; - unsigned char hStretch; - unsigned char vStretch; -} SmiVideoWin; - -/* - * Capture port control - */ -typedef struct { - unsigned int control; - unsigned short topClip; - unsigned short leftClip; - unsigned short srcHeight; - unsigned short srcWidth; - unsigned int srcBufStart1; - unsigned int srcBufStart2; - unsigned short srcOffset; - unsigned short fifoControl; -} SmiCapturePort; - - -/******************************************************************************/ -/* Export Graphic Driver Control */ -/******************************************************************************/ - -typedef struct { - unsigned int isaBase; - unsigned int pciBase; - unsigned int dprBase; - unsigned int vprBase; - unsigned int cprBase; - unsigned int frameAdrs; - unsigned int memSize; - unsigned int mode; - unsigned int gdfIndex; - unsigned int gdfBytesPP; - unsigned int fg; - unsigned int bg; - unsigned int plnSizeX; - unsigned int plnSizeY; - unsigned int winSizeX; - unsigned int winSizeY; - char modeIdent[80]; -} GraphicDevice; - -extern GraphicDevice smi; - - -/******************************************************************************/ -/* Export Graphic Functions */ -/******************************************************************************/ - -void *video_hw_init (void); /* returns GraphicDevice struct or NULL */ - -void video_hw_bitblt ( - unsigned int bpp, /* bytes per pixel */ - unsigned int src_x, /* source pos x */ - unsigned int src_y, /* source pos y */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y /* frame height */ - ); - -void video_hw_rectfill ( - unsigned int bpp, /* bytes per pixel */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y, /* frame height */ - unsigned int color /* fill color */ - ); - -void video_set_lut ( - unsigned int index, /* color number */ - unsigned char r, /* red */ - unsigned char g, /* green */ - unsigned char b /* blue */ - ); - -#endif /*_SMI_LYNX_EM_H_ */ diff --git a/include/spl.h b/include/spl.h index 2bd6e16..5e24856 100644 --- a/include/spl.h +++ b/include/spl.h @@ -11,6 +11,7 @@ #include <linux/compiler.h> #include <asm/spl.h> + /* Boot type */ #define MMCSD_MODE_UNDEFINED 0 #define MMCSD_MODE_RAW 1 @@ -60,6 +61,13 @@ void spl_spi_load_image(void); /* Ethernet SPL functions */ void spl_net_load_image(const char *device); +/* USB SPL functions */ +void spl_usb_load_image(void); + +/* SPL FAT image functions */ +int spl_load_image_fat(block_dev_desc_t *block_dev, int partition, const char *filename); +int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition); + #ifdef CONFIG_SPL_BOARD_INIT void spl_board_init(void); #endif @@ -60,6 +60,11 @@ static unsigned long long notrace tick_to_time(uint64_t tick) return tick; } +int __weak timer_init(void) +{ + return 0; +} + ulong __weak get_timer(ulong base) { return tick_to_time(get_ticks()) - base; diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 82e5c13..60874da 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -750,6 +750,7 @@ repeat: ADDCH(str, '\0'); if (str > end) end[-1] = '\0'; + --str; } #else *str = '\0'; diff --git a/spl/Makefile b/spl/Makefile index 5e5472d..4143e38 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -72,6 +72,7 @@ LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ \ drivers/power/pmic/ LIBS-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/ +LIBS-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/ LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/ LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ @@ -82,6 +83,8 @@ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/ LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/ LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/ +LIBS-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/ +LIBS-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/ ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) LIBS-y += arch/$(ARCH)/imx-common/ diff --git a/tools/scripts/README b/tools/kermit/README index dbc4425..c3b491a 100644 --- a/tools/scripts/README +++ b/tools/kermit/README @@ -8,7 +8,7 @@ This directory contains scripts that help to perform certain actions that need to be done frequently when working with U-Boot. -They are meant as EXAMPLE code, so it is very likely that you will +They are meant as EXAMPLE code, so it is very likely that you will have to modify them before use. diff --git a/tools/scripts/dot.kermrc b/tools/kermit/dot.kermrc index 0fc6c15..0fc6c15 100644 --- a/tools/scripts/dot.kermrc +++ b/tools/kermit/dot.kermrc diff --git a/tools/scripts/flash_param b/tools/kermit/flash_param index 847f99e..847f99e 100644 --- a/tools/scripts/flash_param +++ b/tools/kermit/flash_param diff --git a/tools/scripts/send_cmd b/tools/kermit/send_cmd index 4131331..4131331 100644 --- a/tools/scripts/send_cmd +++ b/tools/kermit/send_cmd diff --git a/tools/scripts/send_image b/tools/kermit/send_image index 9b89d6b..9b89d6b 100644 --- a/tools/scripts/send_image +++ b/tools/kermit/send_image |