summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CREDITS536
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/include/asm/arch-at91/at91_shdwn.h35
-rw-r--r--arch/powerpc/cpu/mpc5xxx/Kconfig3
-rw-r--r--arch/powerpc/cpu/mpc8xx/Kconfig3
-rw-r--r--board/kosagi/novena/MAINTAINERS6
-rw-r--r--board/matrix_vision/common/Makefile8
-rw-r--r--board/matrix_vision/common/mv_common.c112
-rw-r--r--board/matrix_vision/common/mv_common.h9
-rw-r--r--drivers/power/twl4030.c6
-rw-r--r--include/twl4030.h2
-rw-r--r--include/usb/omap1510_udc.h174
-rw-r--r--tools/kwbimage.c37
13 files changed, 42 insertions, 893 deletions
diff --git a/CREDITS b/CREDITS
deleted file mode 100644
index 43d4764..0000000
--- a/CREDITS
+++ /dev/null
@@ -1,536 +0,0 @@
-#
-# Parts of the development effort for this project have been
-# sponsored by SIEMENS AG, Austria. Thanks to SIEMENS for
-# supporting an Open Source project!
-#
-#
-# This is at least a partial credits-file of individual people that
-# have contributed to the U-Boot project. It is sorted by name and
-# formatted to allow easy grepping and beautification by scripts.
-# The fields are: name (N), email (E), web-address (W), PGP key ID
-# and fingerprint (P), description (D), and snail-mail address (S).
-# Thanks,
-#
-# Wolfgang Denk
-#----------
-
-N: Dr. Bruno Achauer
-E: bruno@exet-ag.de
-D: Support for NetBSD (both as host and target system)
-
-N: Guillaume Alexandre
-E: guillaume.alexandre@gespac.ch
-D: Add PCIPPC6 configuration
-
-N: Pantelis Antoniou
-E: panto@intracom.gr
-D: NETVIA & NETPHONE board support, ARTOS support.
-D: Support for Silicon Turnkey eXpress XTc
-
-N: Pierre Aubert
-E: <p.aubert@staubli.com>
-D: Support for RPXClassic board
-
-N: Yuli Barcohen
-E: yuli@arabellasw.com
-D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
-D: Support for Zephyr Engineering ZPC.1900 board.
-D: Support for Interphase iSPAN boards.
-D: Support for Analogue&Micro Adder boards.
-D: Support for Analogue&Micro Rattler boards.
-W: http://www.arabellasw.com
-
-N: Jerry van Baren
-E: <vanbaren@cideas.com>
-D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test.
-
-N: Pavel Bartusek
-E: <pba@sysgo.com>
-D: Reiserfs support
-W: http://www.elinos.com
-
-N: Andre Beaudin
-E: <andre.beaudin@colubris.com>
-D: PCMCIA, Ethernet, TFTP
-
-N: Jon Benediktsson
-E: jonb@marel.is
-D: Support for Marel V37 board
-
-N: Raphael Bossek
-E: raphael.bossek@solutions4linux.de
-D: 8xxrom-0.3.0
-
-N: Cliff Brake
-E: cliff.brake@gmail.com
-D: Port to Vibren PXA255 IDP platform
-W: http://www.vibren.com
-W: http://bec-systems.com
-
-N: Rick Bronson
-E: rick@efn.org
-D: Atmel AT91RM9200DK and NAND support
-
-N: David Brown
-E: DBrown03@harris.com
-D: Extensions to 8xxrom-0.3.0
-
-N: Oliver Brown
-E: obrown@adventnetworks.com
-D: Port to the gw8260 board
-
-N: Jonathan De Bruyne
-E: jonathan.debruyne@siemens.atea.be
-D: Port to Siemens IAD210 board
-
-N: Ken Chou
-E: kchou@ieee.org
-D: Support for A3000 SBC board
-
-N: Conn Clark
-E: clark@esteem.com
-D: ESTEEM192E support
-
-N: Magnus Damm
-E: damm@opensource.se
-D: 8xxrom
-
-N: Richard Danter
-E: richard.danter@windriver.com
-D: Support for Wind River PPMC 7xx/74xx boards
-
-N: George G. Davis
-E: gdavis@mvista.com
-D: Board ports for ADS GraphicsClient+ and Intel Assabet
-
-N: Arun Dharankar
-E: ADharankar@ATTBI.Com
-D: threads / scheduler example code
-
-N: K?ri Dav??sson
-E: kd@flaga.is
-D: FLAGA DM Support
-
-N: Wolfgang Denk
-E: wd@denx.de
-D: U-Boot initial version, continuing maintenance, ARMBoot merge
-W: http://www.denx.de
-
-N: Dan A. Dickey
-E: ddickey@charter.net
-D: FADS Support
-
-N: Mike Dunn
-E: mikedunn@newsguy.com
-D: Palmtreo680 board, docg4 nand flash driver
-
-N: Dave Ellis
-E: DGE@sixnetio.com
-D: EEPROM Speedup
-
-N: Daniel Engstr?m
-E: daniel@omicron.se
-D: x86 port, Support for sc520_cdp board
-
-N: Hayden Fraser
-E: Hayden.Fraser@freescale.com
-D: Support for ColdFire MCF5253
-W: www.freescale.com
-
-N: Dr. Wolfgang Grandegger
-E: wg@denx.de
-D: Support for Interphase 4539 T1/E1/J1 PMC, CCM, SCM boards
-W: www.denx.de
-
-N: Peter Figuli
-E: peposh@etc.sk
-D: Support for WEP EP250 (PXA) board
-
-N: Thomas Frieden
-E: ThomasF@hyperion-entertainment.com
-D: Support for AmigaOne
-
-N: Paul Gortmaker
-E: paul.gortmaker@windriver.com
-D: Support for WRS SBC8347/8349 boards
-
-N: Frank Gottschling
-E: fgottschling@eltec.de
-D: Support for ELTEC MHPC/ELPPC boards, cfb-console, i8042, SMI LynxEM
-W: www.eltec.de
-
-N: Marius Groeger
-E: mgroeger@sysgo.de
-D: MBX Support, board specific function interface, EST SBC8260 support; initial support for StrongARM (LART), ARM720TDMI (implementa A7)
-W: www.elinos.com
-
-N: Kirk Haderlie
-E: khaderlie@vividimage.com
-D: Added TFTP to 8xxrom (-> 0.3.1)
-
-N: Chris Hallinan
-E: clh@net1plus.com
-D: DHCP Support
-
-N: Anne-Sophie Harnois
-E: Anne-Sophie.Harnois@nextream.fr
-D: Port to Walnut405 board
-
-N: Andreas Heppel
-E: aheppel@sysgo.de
-D: CPU Support for MPC 75x
-
-N: Josh Huber
-E: huber@alum.wpi.edu
-D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series.
-W: http://www.mclx.com/
-
-H: Stuart Hughes
-E: stuarth@lineo.com
-D: Port to MPC8260ADS board
-
-H: Rich Ireland
-E: r.ireland@computer.org
-D: FPGA device configuration driver
-
-H: Mark Jackson
-E: mpfj@mimc.co.uk
-D: Port to MIMC200 board
-
-N: Gary Jennejohn
-E: garyj@jennejohn.org
-D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
-W: www.denx.de
-
-N: Murray Jensen
-E: Murray.Jensen@csiro.au
-D: Initial 8260 support; GDB support
-D: Port to Cogent+Hymod boards; Hymod Board Database
-
-N: Yoo. Jonghoon
-E: yooth@ipone.co.kr
-D: Added port to the RPXlite board
-
-N: Mark Jonas
-E: mark.jonas@freescale.com
-D: Support for Freescale Total5200 platform
-W: http://www.mobilegt.com/
-
-N: Mark Jonas
-E: mark.jonas@de.bosch.com
-D: Support for MPR2 board
-
-N: Sam Song
-E: samsongshu@yahoo.com.cn
-D: Port to the RPXlite_DW board
-
-N: Brad Kemp
-E: Brad.Kemp@seranoa.com
-D: Port to Windriver ppmc8260 board
-
-N: Sangmoon Kim
-E: dogoil@etinsys.com
-D: Support for debris board
-D: Support for KVME080 board
-
-N: Frederick W. Klatt
-E: fred.klatt@windriver.com
-D: Support for Wind River SBC8540/SBC8560 boards
-
-N: Thomas Koeller
-E: tkoeller@gmx.net
-D: Port to Motorola Sandpoint 3 (MPC8240)
-
-N: Raghu Krishnaprasad
-E: Raghu.Krishnaprasad@fci.com
-D: Support for Adder-II MPC852T evaluation board
-W: http://www.forcecomputers.com
-
-N: Sergey Kubushyn
-E: ksi@koi8.net
-D: Support for various TI DaVinci based boards.
-
-N: Bernhard Kuhn
-E: bkuhn@metrowerks.com
-D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards
-
-N: Prakash Kumar
-E: prakash@embedx.com
-D Support for Intrinsyc CERF PXA250 board.
-
-N: Thomas Lange
-E: thomas@corelatus.se
-D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
-
-N: The LEOX team
-E: team@leox.org
-D: Support for LEOX boards, DS164x RTC
-W: http://www.leox.org
-
-N: TsiChung Liew
-E: Tsi-Chung.Liew@freescale.com
-D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
-W: www.freescale.com
-
-N: Leif Lindholm
-E: leif.lindholm@i3micro.com
-D: Support for AMD dbau1550 board.
-
-N: Stephan Linz
-E: linz@li-pro.net
-D: Support for Nios Stratix Development Kit (DK-1S10)
-D: Support for SSV ADNP/ESC1 (Nios Cyclone)
-W: http://www.li-pro.net
-
-N: Dave Liu
-E: daveliu@freescale.com
-D: Support for MPC8315, MPC832x, MPC8360, MPC837x
-W: www.freescale.com
-
-N: Raymond Lo
-E: lo@routefree.com
-D: Support for DOS partitions
-
-N: James MacAulay
-E: james.macaulay@amirix.com
-D: Suppport for Amirix AP1000
-W: www.amirix.com
-
-N: Dan Malek
-E: dan@embeddedalley.com
-D: FADSROM, the grandfather of all of this
-D: Support for Silicon Turnkey eXpress XTc
-
-N: Andrea "llandre" Marson
-E: andrea.marson@dave-tech.it
-D: Port to PPChameleonEVB board
-W: www.dave-tech.it
-
-N: Reinhard Meyer
-E: r.meyer@emk-elektronik.de
-D: Port to EMK TOP860 Module
-
-N: Jay Monkman
-E: jtm@smoothsmoothie.com
-D: EST SBC8260 support
-
-N: Frank Morauf
-E: frank.morauf@salzbrenner.com
-D: Support for Embedded Planet RPX Super Board
-
-N: David M?ller
-E: d.mueller@elsoft.ch
-D: Support for Samsung ARM920T SMDK2410 eval board
-
-N: Scott McNutt
-E: smcnutt@psyent.com
-D: Support for Altera Nios-32 CPU
-D: Support for Altera Nios-II CPU
-D: Support for Nios Cyclone Development Kit (DK-1C20)
-W: http://www.psyent.com
-
-N: Rolf Offermanns
-E: rof@sysgo.de
-D: Initial support for SSV-DNP1110, SMC91111 driver
-W: www.elinos.com
-
-N: John Otken
-E: jotken@softadvances.com
-D: Support for AMCC Luan 440SP board
-
-N: Tolunay Orkun
-E: torkun@nextio.com
-D: Support for Cogent CSB272 & CSB472 boards
-
-N: Keith Outwater
-E: keith_outwater@mvis.com
-D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC)
-
-N: Frank Panno
-E: fpanno@delphintech.com
-D: Support for Embedded Planet EP8260 Board
-
-N: Denis Peter
-E: d.peter@mpl.ch
-D: Support for 4xx SCSI, floppy, CDROM, CT69000 video, ...
-D: Support for PIP405 board
-D: Support for MIP405 board
-
-N: Dave Peverley
-E: dpeverley@mpc-data.co.uk
-W: http://www.mpc-data.co.uk
-D: OMAP730 P2 board support
-
-N: Bill Pitts
-E: wlp@mindspring.com
-D: BedBug embedded debugger code
-
-N: Daniel Poirot
-E: dan.poirot@windriver.com
-D: Support for the Wind River sbc405, sbc8240 board
-W: http://www.windriver.com
-
-N: Stelian Pop
-E: stelian@popies.net
-D: Atmel AT91CAP9ADK support
-
-N: Ricardo Ribalda Delgado
-E: ricardo.ribalda@uam.es
-D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
-D: Virtex ppc440 generic architecture
-D: Virtex ppc405 generic architecture
-W: http://www.ii.uam.es/~rribalda
-
-N: Stefan Roese
-E: sr@denx.de
-D: AMCC PPC4xx Support
-W: http://www.denx.de
-
-N: Erwin Rol
-E: erwin@muffin.org
-D: boot support for RTEMS
-
-N: Paul Ruhland
-E: pruhland@rochester.rr.com
-D: Port to Logic Zoom LH7A40x SDK board(s)
-
-N: Neil Russell
-E: caret@c-side.com
-D: Author of LiMon-1.4.2, which contributed some ideas
-
-N: Travis B. Sawyer
-E: travis.sawyer@sandburst.com
-D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea)
-
-N: Paolo Scaffardi
-E: arsenio@tin.it
-D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
-
-N: Andre Schwarz
-E: andre.schwarz@matrix-vision.de
-D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR)
-
-N: Robert Schwebel
-E: r.schwebel@pengutronix.de
-D: Support for csb226 and innokom boards (PXA2xx)
-
-N: Aaron Sells
-E: sellsa@embeddedplanet.com
-D: Support for EP82xxM
-
-N: Art Shipkowski
-E: art@videon-central.com
-D: Support for NetSilicon NS7520
-D: Support for ColdFire MCF5275
-
-N: Jeremy C. Andrus
-E: jeremy@jeremya.com
-D: ColdFire MCF5249 initialization code
-W: jeremya.com
-
-N: Michal Simek
-E: monstr@monstr.eu
-D: Support for Microblaze, ML401, XUPV2P board
-W: www.monstr.eu
-
-N: Yasushi Shoji
-E: yashi@atmark-techno.com
-D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
-
-N: Kurt Stremerch
-E: kurt@exys.be
-D: Support for Exys XSEngine board
-
-N: Andrea Scian
-E: andrea.scian@dave-tech.it
-D: Port to B2 board
-W: www.dave-tech.it
-
-N: Timur Tabi
-E: timur@freescale.com
-D: Support for MPC8349E-mITX
-W: www.freescale.com
-
-N: Rob Taylor
-E: robt@flyingpig.com
-D: Port to MBX860T and Sandpoint8240
-
-N: Erik Theisen
-E: etheisen@mindspring.com
-D: MBX8xx and many other patches
-
-N: Jim Thompson
-E: jim@musenki.com
-D: Support for MUSENKI board
-
-N: Rune Torgersen
-E: <runet@innovsys.com>
-D: Support for Motorola MPC8266ADS board
-
-N: Greg Ungerer
-E: greg.ungerer@opengear.com
-D: Support for ks8695 CPU, and OpenGear cmXXXX boards
-
-N: David Updegraff
-E: dave@cray.com
-D: Port to Cray L1 board; DHCP vendor extensions
-
-N: Christian Vejlbo
-E: christian.vejlbo@tellabs.com
-D: FADS860T ethernet support
-
-N: Robert Whaley
-E: rwhaley@applieddata.net
-D: Port to ARM PXA27x adsvix SBC
-
-N: Martin Winistoerfer
-E: martinwinistoerfer@gmx.ch
-D: Port to MPC555/556 microcontrollers and support for cmi board
-
-N: David Wu
-E: support@arcturusnetworks.com
-D: Mercury Security EP2500
-W: http://www.arcturusnetworks.com
-
-N: Ming-Len Wu
-E: minglen_wu@techware.com.tw
-D: Motorola MX1ADS board support
-W: http://www.techware.com.tw/
-
-N: Xianghua Xiao
-E: x.xiao@motorola.com
-D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
-
-N: John Zhan
-E: zhanz@sinovee.com
-D: Support for SinoVee Microsystems SC8xx SBC
-
-N: Alex Zuepke
-E: azu@sysgo.de
-D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
-W: www.elinos.com
-
-N: Nobuhiro Iwamatsu
-E: iwamatsu@nigauri.org
-D: Support for SuperH, MS7750SE01 and MS7722SE01 boards.
-W: http://www.nigauri.org/~iwamatsu/
-
-N: Alan Lu
-E: alnalu001@gmail.com
-D: Support for Artila M-501 starter kit
-W: http://www.artila.com/
-
-N: Kimmo Leppala
-E: kimmo.leppala@sysart.fi
-D: Support for Artila M-501 starter kit
-W: http://www.sysart.fi/
-
-N: Timo Tuunainen
-E: timo.tuunainen@sysart.fi
-D: Support for Artila M-501 starter kit
-W: http://www.sysart.fi/
-
-N: Philip Balister
-E: philip@opensdr.com
-D: Port to Lyrtech SFFSDR development board.
-W: www.opensdr.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 171ad03..43700c3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -177,10 +177,6 @@ config TARGET_ETHERNUT5
bool "Support ethernut5"
select CPU_ARM926EJS
-config TARGET_TOP9000
- bool "Support top9000"
- select CPU_ARM926EJS
-
config TARGET_MEESC
bool "Support meesc"
select CPU_ARM926EJS
diff --git a/arch/arm/include/asm/arch-at91/at91_shdwn.h b/arch/arm/include/asm/arch-at91/at91_shdwn.h
deleted file mode 100644
index 18d9ea6..0000000
--- a/arch/arm/include/asm/arch-at91/at91_shdwn.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2010
- * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
- *
- * Shutdown Controller
- * Based on AT91SAM9XE datasheet
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef AT91_SHDWN_H
-#define AT91_SHDWN_H
-
-#ifndef __ASSEMBLY__
-
-struct at91_shdwn {
- u32 cr; /* Control Rer. WO */
- u32 mr; /* Mode Register RW 0x00000003 */
- u32 sr; /* Status Register RO 0x00000000 */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#define AT91_SHDW_CR_KEY 0xa5000000
-#define AT91_SHDW_CR_SHDW 0x00000001
-
-#define AT91_SHDW_MR_RTTWKEN 0x00010000
-#define AT91_SHDW_MR_CPTWK0 0x000000f0
-#define AT91_SHDW_MR_WKMODE0H2L 0x00000002
-#define AT91_SHDW_MR_WKMODE0L2H 0x00000001
-
-#define AT91_SHDW_SR_RTTWK 0x00010000
-#define AT91_SHDW_SR_WAKEUP0 0x00000001
-
-#endif
diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig
index a1305bc..c1fb92a 100644
--- a/arch/powerpc/cpu/mpc5xxx/Kconfig
+++ b/arch/powerpc/cpu/mpc5xxx/Kconfig
@@ -56,9 +56,6 @@ config TARGET_TOTAL5200
config TARGET_V38B
bool "Support v38b"
-config TARGET_TOP5200
- bool "Support TOP5200"
-
config TARGET_CPCI5200
bool "Support cpci5200"
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index 011f4b4..e447748e 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -40,9 +40,6 @@ config TARGET_RRVISION
config TARGET_SPD823TS
bool "Support SPD823TS"
-config TARGET_TOP860
- bool "Support TOP860"
-
config TARGET_KUP4K
bool "Support KUP4K"
diff --git a/board/kosagi/novena/MAINTAINERS b/board/kosagi/novena/MAINTAINERS
new file mode 100644
index 0000000..d3471c2
--- /dev/null
+++ b/board/kosagi/novena/MAINTAINERS
@@ -0,0 +1,6 @@
+NOVENA BOARD
+M: Marek Vasut <marex@denx.de>
+S: Maintained
+F: board/kosagi/novena/
+F: include/configs/novena.h
+F: configs/novena_defconfig
diff --git a/board/matrix_vision/common/Makefile b/board/matrix_vision/common/Makefile
deleted file mode 100644
index 699da1c..0000000
--- a/board/matrix_vision/common/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = mv_common.o
diff --git a/board/matrix_vision/common/mv_common.c b/board/matrix_vision/common/mv_common.c
deleted file mode 100644
index 1be5aba..0000000
--- a/board/matrix_vision/common/mv_common.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2008
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <environment.h>
-#include <fpga.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_ENV_IS_NOWHERE
-static char* entries_to_keep[] = {
- "serial#", "ethaddr", "eth1addr", "model_info", "sensor_cnt",
- "fpgadatasize", "ddr_size", "use_dhcp", "use_static_ipaddr",
- "static_ipaddr", "static_netmask", "static_gateway",
- "syslog", "watchdog", "netboot", "evo8serialnumber" };
-
-#define MV_MAX_ENV_ENTRY_LENGTH 64
-#define MV_KEEP_ENTRIES ARRAY_SIZE(entries_to_keep)
-
-void mv_reset_environment(void)
-{
- int i;
- char *s[MV_KEEP_ENTRIES];
- char entries[MV_KEEP_ENTRIES][MV_MAX_ENV_ENTRY_LENGTH];
-
- printf("\n*** RESET ENVIRONMENT ***\n");
-
- memset(entries, 0, MV_KEEP_ENTRIES * MV_MAX_ENV_ENTRY_LENGTH);
- for (i = 0; i < MV_KEEP_ENTRIES; i++) {
- s[i] = getenv(entries_to_keep[i]);
- if (s[i]) {
- printf("save '%s' : %s\n", entries_to_keep[i], s[i]);
- strncpy(entries[i], s[i], MV_MAX_ENV_ENTRY_LENGTH);
- }
- }
-
- gd->env_valid = 0;
- env_relocate();
-
- for (i = 0; i < MV_KEEP_ENTRIES; i++) {
- if (s[i]) {
- printf("restore '%s' : %s\n", entries_to_keep[i], s[i]);
- setenv(entries_to_keep[i], s[i]);
- }
- }
-
- saveenv();
-}
-#endif
-
-int mv_load_fpga(void)
-{
- int result;
- size_t data_size = 0;
- void *fpga_data = NULL;
- char *datastr = getenv("fpgadata");
- char *sizestr = getenv("fpgadatasize");
-
- if (getenv("skip_fpga")) {
- printf("found 'skip_fpga' -> FPGA _not_ loaded !\n");
- return -1;
- }
- printf("loading FPGA\n");
-
- if (datastr)
- fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
- if (sizestr)
- data_size = (size_t)simple_strtoul(sizestr, NULL, 16);
- if (!data_size) {
- printf("fpgadatasize invalid -> FPGA _not_ loaded !\n");
- return -1;
- }
-
- result = fpga_load(0, fpga_data, data_size, BIT_FULL);
- if (!result)
- bootstage_mark(BOOTSTAGE_ID_START);
-
- return result;
-}
-
-u8 *dhcp_vendorex_prep(u8 *e)
-{
- char *ptr;
-
- /* DHCP vendor-class-identifier = 60 */
- if ((ptr = getenv("dhcp_vendor-class-identifier"))) {
- *e++ = 60;
- *e++ = strlen(ptr);
- while (*ptr)
- *e++ = *ptr++;
- }
- /* DHCP_CLIENT_IDENTIFIER = 61 */
- if ((ptr = getenv("dhcp_client_id"))) {
- *e++ = 61;
- *e++ = strlen(ptr);
- while (*ptr)
- *e++ = *ptr++;
- }
-
- return e;
-}
-
-u8 *dhcp_vendorex_proc(u8 *popt)
-{
- return NULL;
-}
diff --git a/board/matrix_vision/common/mv_common.h b/board/matrix_vision/common/mv_common.h
deleted file mode 100644
index 3693943..0000000
--- a/board/matrix_vision/common/mv_common.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Copyright 2008 Matrix Vision GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-extern int mv_load_fpga(void);
-extern void mv_reset_environment(void);
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index 3e50310..e578ae6 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -98,4 +98,10 @@ void twl4030_power_mmc_init(void)
TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ /* Set VMMC2 to 3.15 Volts */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
+ TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
+ TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
}
diff --git a/include/twl4030.h b/include/twl4030.h
index 093c61d..18795a6 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -395,6 +395,8 @@
#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03
#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02
#define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03
+#define TWL4030_PM_RECEIVER_VMMC2_VSEL_30 0x0B
+#define TWL4030_PM_RECEIVER_VMMC2_VSEL_32 0x0C
#define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03
/* Device Selection in PM Receiver Module */
diff --git a/include/usb/omap1510_udc.h b/include/usb/omap1510_udc.h
deleted file mode 100644
index adfbf54..0000000
--- a/include/usb/omap1510_udc.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * Based on
- * linux/drivers/usb/device/bi/omap.h
- * Register definitions for TI OMAP1510 USB bus interface driver
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __USBDCORE_OMAP1510_H__
-#define __USBDCORE_OMAP1510_H__
-
-
-/*
- * 13.2 MPU Register Map
- */
-
-/* Table 13-1. USB Function Module Registers (endpoint) */
-#define UDC_BASE 0xFFFB4000
-#define UDC_OFFSET(offset) (UDC_BASE + (offset))
-#define UDC_REV UDC_OFFSET(0x0) /* Revision */
-#define UDC_EP_NUM UDC_OFFSET(0x4) /* Endpoint selection */
-#define UDC_DATA UDC_OFFSET(0x08) /* Data */
-#define UDC_CTRL UDC_OFFSET(0x0C) /* Control */
-#define UDC_STAT_FLG UDC_OFFSET(0x10) /* Status flag */
-#define UDC_RXFSTAT UDC_OFFSET(0x14) /* Receive FIFO status */
-#define UDC_SYSCON1 UDC_OFFSET(0x18) /* System configuration 1 */
-#define UDC_SYSCON2 UDC_OFFSET(0x1C) /* System configuration 2 */
-#define UDC_DEVSTAT UDC_OFFSET(0x20) /* Device status */
-#define UDC_SOF UDC_OFFSET(0x24) /* Start of frame */
-#define UDC_IRQ_EN UDC_OFFSET(0x28) /* Interrupt enable */
-#define UDC_DMA_IRQ_EN UDC_OFFSET(0x2C) /* DMA interrupt enable */
-#define UDC_IRQ_SRC UDC_OFFSET(0x30) /* Interrupt source */
-#define UDC_EPN_STAT UDC_OFFSET(0x34) /* Endpoint interrupt status */
-#define UDC_DMAN_STAT UDC_OFFSET(0x3C) /* DMA endpoint interrupt status */
-
-/* IRQ_EN register fields */
-#define UDC_Sof_IE (1 << 7) /* Start-of-frame interrupt enabled */
-#define UDC_EPn_RX_IE (1 << 5) /* Receive endpoint interrupt enabled */
-#define UDC_EPn_TX_IE (1 << 4) /* Transmit endpoint interrupt enabled */
-#define UDC_DS_Chg_IE (1 << 3) /* Device state changed interrupt enabled */
-#define UDC_EP0_IE (1 << 0) /* EP0 transaction interrupt enabled */
-
-/* IRQ_SRC register fields */
-#define UDC_TXn_Done (1 << 10) /* Transmit DMA channel n done */
-#define UDC_RXn_Cnt (1 << 9) /* Receive DMA channel n transactions count */
-#define UDC_RXn_EOT (1 << 8) /* Receive DMA channel n end of transfer */
-#define UDC_SOF_Flg (1 << 7) /* Start-of-frame interrupt flag */
-#define UDC_EPn_RX (1 << 5) /* Endpoint n OUT transaction */
-#define UDC_EPn_TX (1 << 4) /* Endpoint n IN transaction */
-#define UDC_DS_Chg (1 << 3) /* Device state changed */
-#define UDC_Setup (1 << 2) /* Setup transaction */
-#define UDC_EP0_RX (1 << 1) /* EP0 OUT transaction */
-#define UDC_EP0_TX (1 << 0) /* EP0 IN transaction */
-
-/* DEVSTAT register fields, 14.2.9 */
-#define UDC_R_WK_OK (1 << 6) /* Remote wakeup granted */
-#define UDC_USB_Reset (1 << 5) /* USB reset signalling is active */
-#define UDC_SUS (1 << 4) /* Suspended state */
-#define UDC_CFG (1 << 3) /* Configured state */
-#define UDC_ADD (1 << 2) /* Addressed state */
-#define UDC_DEF (1 << 1) /* Default state */
-#define UDC_ATT (1 << 0) /* Attached state */
-
-/* SYSCON1 register fields */
-#define UDC_Cfg_Lock (1 << 8) /* Device configuration locked */
-#define UDC_Nak_En (1 << 4) /* NAK enable */
-#define UDC_Self_Pwr (1 << 2) /* Device is self-powered */
-#define UDC_Soff_Dis (1 << 1) /* Shutoff disabled */
-#define UDC_Pullup_En (1 << 0) /* External pullup enabled */
-
-/* SYSCON2 register fields */
-#define UDC_Rmt_Wkp (1 << 6) /* Remote wakeup */
-#define UDC_Stall_Cmd (1 << 5) /* Stall endpoint */
-#define UDC_Dev_Cfg (1 << 3) /* Device configured */
-#define UDC_Clr_Cfg (1 << 2) /* Clear configured */
-
-/*
- * Select and enable endpoints
- */
-
-/* Table 13-1. USB Function Module Registers (endpoint configuration) */
-#define UDC_EPBASE UDC_OFFSET(0x80) /* Endpoints base address */
-#define UDC_EP0 UDC_EPBASE /* Control endpoint configuration */
-#define UDC_EP_RX_BASE UDC_OFFSET(0x84) /* Receive endpoints base address */
-#define UDC_EP_RX(endpoint) (UDC_EP_RX_BASE + ((endpoint) - 1) * 4)
-#define UDC_EP_TX_BASE UDC_OFFSET(0xC4) /* Transmit endpoints base address */
-#define UDC_EP_TX(endpoint) (UDC_EP_TX_BASE + ((endpoint) - 1) * 4)
-
-/* EP_NUM register fields */
-#define UDC_Setup_Sel (1 << 6) /* Setup FIFO select */
-#define UDC_EP_Sel (1 << 5) /* TX/RX FIFO select */
-#define UDC_EP_Dir (1 << 4) /* Endpoint direction */
-
-/* CTRL register fields */
-#define UDC_Clr_Halt (1 << 7) /* Clear halt endpoint */
-#define UDC_Set_Halt (1 << 6) /* Set halt endpoint */
-#define UDC_Set_FIFO_En (1 << 2) /* Set FIFO enable */
-#define UDC_Clr_EP (1 << 1) /* Clear endpoint */
-#define UDC_Reset_EP (1 << 0) /* Reset endpoint */
-
-/* STAT_FLG register fields */
-#define UDC_Miss_In (1 << 14)
-#define UDC_Data_Flush (1 << 13)
-#define UDC_ISO_Err (1 << 12)
-#define UDC_ISO_FIFO_Empty (1 << 9)
-#define UDC_ISO_FIFO_Full (1 << 8)
-#define UDC_EP_Halted (1 << 6)
-#define UDC_STALL (1 << 5)
-#define UDC_NAK (1 << 4)
-#define UDC_ACK (1 << 3)
-#define UDC_FIFO_En (1 << 2)
-#define UDC_Non_ISO_FIFO_Empty (1 << 1)
-#define UDC_Non_ISO_FIFO_Full (1 << 0)
-
-/* EPn_RX register fields */
-#define UDC_EPn_RX_Valid (1 << 15) /* valid */
-#define UDC_EPn_RX_Db (1 << 14) /* double-buffer */
-#define UDC_EPn_RX_Iso (1 << 11) /* isochronous */
-
-/* EPn_TX register fields */
-#define UDC_EPn_TX_Valid (1 << 15) /* valid */
-#define UDC_EPn_TX_Db (1 << 14) /* double-buffer */
-#define UDC_EPn_TX_Iso (1 << 11) /* isochronous */
-
-#define EP0_PACKETSIZE 0x40
-
-/* physical to logical endpoint mapping
- * Physical endpoints are an index into device->bus->endpoint_array.
- * Logical endpoints are endpoints 0 to 15 IN and OUT as defined in
- * the USB specification.
- *
- * physical ep logical ep direction endpoint_address
- * 0 0 IN and OUT 0x00
- * 1 to 15 1 to 15 OUT 0x01 to 0x0f
- * 16 to 30 1 to 15 IN 0x81 to 0x8f
- */
-#define PHYS_EP_TO_EP_ADDR(ep) (((ep) < 16) ? (ep) : (((ep) - 15) | 0x80))
-#define EP_ADDR_TO_PHYS_EP(a) (((a) & 0x80) ? (((a) & ~0x80) + 15) : (a))
-
-/* MOD_CONF_CTRL_0 bits (FIXME: move to board hardware.h ?) */
-#define CONF_MOD_USB_W2FC_VBUS_MODE_R (1 << 17)
-
-/* Other registers (may be) related to USB */
-
-#define CLOCK_CTRL (0xFFFE0830)
-#define APLL_CTRL (0xFFFE084C)
-#define DPLL_CTRL (0xFFFE083C)
-#define SOFT_REQ (0xFFFE0834)
-#define STATUS_REQ (0xFFFE0840)
-
-/* FUNC_MUX_CTRL_0 bits related to USB */
-#define UDC_VBUS_CTRL (1 << 19)
-#define UDC_VBUS_MODE (1 << 18)
-
-/* OMAP Endpoint parameters */
-#define UDC_OUT_PACKET_SIZE 64
-#define UDC_IN_PACKET_SIZE 64
-#define UDC_INT_PACKET_SIZE 16
-#define UDC_BULK_PACKET_SIZE 16
-
-#define UDC_INT_ENDPOINT 5
-#define UDC_OUT_ENDPOINT 2
-#define UDC_IN_ENDPOINT 1
-
-#endif
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 1120e9b..ec52f9e 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -12,6 +12,7 @@
*/
#include "imagetool.h"
+#include <limits.h>
#include <image.h>
#include <stdint.h>
#include "kwbimage.h"
@@ -396,13 +397,20 @@ static size_t image_headersz_v1(struct image_tool_params *params,
ret = stat(binarye->binary.file, &s);
if (ret < 0) {
- char *cwd = get_current_dir_name();
+ char cwd[PATH_MAX];
+ char *dir = cwd;
+
+ memset(cwd, 0, sizeof(cwd));
+ if (!getcwd(cwd, sizeof(cwd))) {
+ dir = "current working directory";
+ perror("getcwd() failed");
+ }
+
fprintf(stderr,
"Didn't find the file '%s' in '%s' which is mandatory to generate the image\n"
"This file generally contains the DDR3 training code, and should be extracted from an existing bootable\n"
"image for your board. See 'kwbimage -x' to extract it from an existing image.\n",
- binarye->binary.file, cwd);
- free(cwd);
+ binarye->binary.file, dir);
return 0;
}
@@ -752,14 +760,25 @@ static void kwbimage_set_header(void *ptr, struct stat *sbuf, int ifd,
}
version = image_get_version();
- /* Fallback to version 0 is no version is provided in the cfg file */
- if (version == -1)
- version = 0;
-
- if (version == 0)
+ switch (version) {
+ /*
+ * Fallback to version 0 if no version is provided in the
+ * cfg file
+ */
+ case -1:
+ case 0:
image = image_create_v0(&headersz, params, sbuf->st_size);
- else if (version == 1)
+ break;
+
+ case 1:
image = image_create_v1(&headersz, params, sbuf->st_size);
+ break;
+
+ default:
+ fprintf(stderr, "Unsupported version %d\n", version);
+ free(image_cfg);
+ exit(EXIT_FAILURE);
+ }
if (!image) {
fprintf(stderr, "Could not create image\n");