summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/mips/cpu/mips32/start.S7
-rw-r--r--arch/mips/cpu/mips64/start.S7
-rw-r--r--arch/mips/lib/Makefile3
-rw-r--r--arch/mips/lib/board.c320
-rw-r--r--arch/mips/lib/bootm.c23
-rw-r--r--include/configs/dbau1x00.h3
-rw-r--r--include/configs/pb1x00.h3
-rw-r--r--include/configs/qemu-mips.h3
-rw-r--r--include/configs/qemu-mips64.h3
-rw-r--r--include/configs/vct.h3
10 files changed, 45 insertions, 330 deletions
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
index 68e59b5..384ea26 100644
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
@@ -136,10 +136,11 @@ reset:
/* Set up temporary stack */
li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+ move fp, sp
la t9, board_init_f
jr t9
- nop
+ move ra, zero
/*
* void relocate_code (addr_sp, gd, addr_moni)
@@ -155,6 +156,7 @@ reset:
.ent relocate_code
relocate_code:
move sp, a0 # set new stack pointer
+ move fp, sp
move s0, a1 # save gd in s0
move s2, a2 # save destination address in s2
@@ -260,8 +262,9 @@ in_ram:
addi t1, 4
move a0, s0 # a0 <-- gd
+ move a1, s2
la t9, board_init_r
jr t9
- move a1, s2
+ move ra, zero
.end relocate_code
diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
index 92954e1..6ff714e 100644
--- a/arch/mips/cpu/mips64/start.S
+++ b/arch/mips/cpu/mips64/start.S
@@ -130,10 +130,11 @@ reset:
/* Set up temporary stack */
dli sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+ move fp, sp
dla t9, board_init_f
jr t9
- nop
+ move ra, zero
/*
* void relocate_code (addr_sp, gd, addr_moni)
@@ -149,6 +150,7 @@ reset:
.ent relocate_code
relocate_code:
move sp, a0 # set new stack pointer
+ move fp, sp
move s0, a1 # save gd in s0
move s2, a2 # save destination address in s2
@@ -254,8 +256,9 @@ in_ram:
daddi t1, 8
move a0, s0 # a0 <-- gd
+ move a1, s2
dla t9, board_init_r
jr t9
- move a1, s2
+ move ra, zero
.end relocate_code
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index e483e86..7f9b653 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -5,9 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifndef CONFIG_SYS_GENERIC_BOARD
-obj-y += board.o
-endif
obj-y += io.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
deleted file mode 100644
index 3feb020..0000000
--- a/arch/mips/lib/board.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <serial.h>
-#include <stdio_dev.h>
-#include <version.h>
-#include <net.h>
-#include <environment.h>
-#include <nand.h>
-#include <onenand_uboot.h>
-#include <spi.h>
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ulong monitor_flash_len;
-
-static char *failed = "*** failed ***\n";
-
-int __board_early_init_f(void)
-{
- /*
- * Nothing to do in this dummy implementation
- */
- return 0;
-}
-int board_early_init_f(void)
- __attribute__((weak, alias("__board_early_init_f")));
-
-static int init_func_ram(void)
-{
-#ifdef CONFIG_BOARD_TYPES
- int board_type = gd->board_type;
-#else
- int board_type = 0; /* use dummy arg */
-#endif
- puts("DRAM: ");
-
- gd->ram_size = initdram(board_type);
- if (gd->ram_size > 0) {
- print_size(gd->ram_size, "\n");
- return 0;
- }
- puts(failed);
- return 1;
-}
-
-static int display_banner(void)
-{
-
- printf("\n\n%s\n\n", version_string);
- return 0;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config(ulong size)
-{
- puts("Flash: ");
- print_size(size, "\n");
-}
-#endif
-
-static int init_baudrate(void)
-{
- gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
- return 0;
-}
-
-
-/*
- * Breath some life into the board...
- *
- * The first part of initialization is running from Flash memory;
- * its main purpose is to initialize the RAM so that we
- * can relocate the monitor code to RAM.
- */
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t)(void);
-
-init_fnc_t *init_sequence[] = {
- board_early_init_f,
- timer_init,
- env_init, /* initialize environment */
- init_baudrate, /* initialize baudrate settings */
- serial_init, /* serial communications setup */
- console_init_f,
- display_banner, /* say that we are here */
- checkboard,
- init_func_ram,
- NULL,
-};
-
-
-void board_init_f(ulong bootflag)
-{
- gd_t gd_data, *id;
- bd_t *bd;
- init_fnc_t **init_fnc_ptr;
- ulong addr, addr_sp, len;
- ulong *s;
-
- /* Pointer is writable since we allocated a register for it.
- */
- gd = &gd_data;
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("" : : : "memory");
-
- memset((void *)gd, 0, sizeof(gd_t));
-
- for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr)() != 0)
- hang();
- }
-
- /*
- * Now that we have DRAM mapped and working, we can
- * relocate the code and continue running from DRAM.
- */
- addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
-
- /* We can reserve some RAM "on top" here.
- */
-
- /* round down to next 4 kB limit.
- */
- addr &= ~(4096 - 1);
- debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
- /* Reserve memory for U-Boot code, data & bss
- * round down to next 16 kB limit
- */
- len = bss_end() - CONFIG_SYS_MONITOR_BASE;
- addr -= len;
- addr &= ~(16 * 1024 - 1);
-
- debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-
- /* Reserve memory for malloc() arena.
- */
- addr_sp = addr - TOTAL_MALLOC_LEN;
- debug("Reserving %dk for malloc() at: %08lx\n",
- TOTAL_MALLOC_LEN >> 10, addr_sp);
-
- /*
- * (permanently) allocate a Board Info struct
- * and a permanent copy of the "global" data
- */
- addr_sp -= sizeof(bd_t);
- bd = (bd_t *)addr_sp;
- gd->bd = bd;
- debug("Reserving %zu Bytes for Board Info at: %08lx\n",
- sizeof(bd_t), addr_sp);
-
- addr_sp -= sizeof(gd_t);
- id = (gd_t *)addr_sp;
- debug("Reserving %zu Bytes for Global Data at: %08lx\n",
- sizeof(gd_t), addr_sp);
-
- /* Reserve memory for boot params.
- */
- addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
- bd->bi_boot_params = addr_sp;
- debug("Reserving %dk for boot params() at: %08lx\n",
- CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
-
- /*
- * Finally, we set up a new (bigger) stack.
- *
- * Leave some safety gap for SP, force alignment on 16 byte boundary
- * Clear initial stack frame
- */
- addr_sp -= 16;
- addr_sp &= ~0xF;
- s = (ulong *)addr_sp;
- *s-- = 0;
- *s-- = 0;
- addr_sp = (ulong)s;
- debug("Stack Pointer at: %08lx\n", addr_sp);
-
- /*
- * Save local variables to board info struct
- */
- bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM */
- bd->bi_memsize = gd->ram_size; /* size of DRAM in bytes */
-
- memcpy(id, (void *)gd, sizeof(gd_t));
-
- relocate_code(addr_sp, id, addr);
-
- /* NOTREACHED - relocate_code() does not return */
-}
-
-/*
- * This is the next part if the initialization sequence: we are now
- * running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
- * that critical any more, etc.
- */
-
-void board_init_r(gd_t *id, ulong dest_addr)
-{
-#ifndef CONFIG_SYS_NO_FLASH
- ulong size;
-#endif
- bd_t *bd;
-
- gd = id;
- gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-
- debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
- gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
-
- monitor_flash_len = image_copy_end() - dest_addr;
-
- serial_initialize();
-
- bd = gd->bd;
-
- /* The Malloc area is immediately below the monitor copy in DRAM */
- mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
- TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
-
-#ifndef CONFIG_SYS_NO_FLASH
- /* configure available FLASH banks */
- size = flash_init();
- display_flash_config(size);
- bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
- bd->bi_flashsize = size;
-
-#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
- bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
-#else
- bd->bi_flashoffset = 0;
-#endif
-#else
- bd->bi_flashstart = 0;
- bd->bi_flashsize = 0;
- bd->bi_flashoffset = 0;
-#endif
-
-#ifdef CONFIG_CMD_NAND
- puts("NAND: ");
- nand_init(); /* go init the NAND */
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
- onenand_init();
-#endif
-
- /* relocate environment function pointers etc. */
- env_relocate();
-
-#if defined(CONFIG_PCI)
- /*
- * Do pci configuration
- */
- pci_init();
-#endif
-
-/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize stdio devices */
- stdio_init();
-
- jumptable_init();
-
- /* Initialize the console (after the relocation and devices init) */
- console_init_r();
-/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
-
- /* Initialize from environment */
- load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
-#ifdef CONFIG_CMD_SPI
- puts("SPI: ");
- spi_init(); /* go init the SPI */
- puts("ready\n");
-#endif
-
-#if defined(CONFIG_MISC_INIT_R)
- /* miscellaneous platform dependent initialisations */
- misc_init_r();
-#endif
-
-#ifdef CONFIG_BITBANGMII
- bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
- puts("Net: ");
- eth_initialize(gd->bd);
-#endif
-
- /* main_loop() can return to retry autoboot, if so just run it again. */
- for (;;)
- main_loop();
-
- /* NOTREACHED - no way out of command loop except booting */
-}
diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c
index 71bb0d2..e0722d2 100644
--- a/arch/mips/lib/bootm.c
+++ b/arch/mips/lib/bootm.c
@@ -6,10 +6,7 @@
*/
#include <common.h>
-#include <command.h>
#include <image.h>
-#include <u-boot/zlib.h>
-#include <asm/byteorder.h>
#include <asm/addrspace.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -52,6 +49,20 @@ void arch_lmb_reserve(struct lmb *lmb)
lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp);
}
+static int boot_setup_linux(bootm_headers_t *images)
+{
+ int ret;
+ ulong rd_len;
+
+ rd_len = images->rd_end - images->rd_start;
+ ret = boot_ramdisk_high(&images->lmb, images->rd_start,
+ rd_len, &images->initrd_start, &images->initrd_end);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static void linux_cmdline_init(void)
{
linux_argc = 1;
@@ -224,6 +235,8 @@ static void boot_jump_linux(bootm_headers_t *images)
int do_bootm_linux(int flag, int argc, char * const argv[],
bootm_headers_t *images)
{
+ int ret;
+
/* No need for those on MIPS */
if (flag & BOOTM_STATE_OS_BD_T)
return -1;
@@ -243,6 +256,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[],
return 0;
}
+ ret = boot_setup_linux(images);
+ if (ret)
+ return ret;
+
boot_cmdline_linux(images);
boot_prep_linux(images);
boot_jump_linux(images);
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index e0bf3dc..8a7447d 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -15,6 +15,9 @@
#define CONFIG_DBAU1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifdef CONFIG_DBAU1000
/* Also known as Merlot */
#define CONFIG_SOC_AU1000 1
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index 1c04a58..61e6af3 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -15,6 +15,9 @@
#define CONFIG_PB1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifdef CONFIG_PB1000
#define CONFIG_SOC_AU1000 1
#else
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index 98ed8bc..1548d3e 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -13,6 +13,9 @@
#define __CONFIG_H
#define CONFIG_QEMU_MIPS
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
index e8f5a4c..61cafad 100644
--- a/include/configs/qemu-mips64.h
+++ b/include/configs/qemu-mips64.h
@@ -13,6 +13,9 @@
#define __CONFIG_H
#define CONFIG_QEMU_MIPS
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 217ba2f..83e4163 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -25,6 +25,9 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)