summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/sunxi/Kconfig9
-rw-r--r--configs/Ainol_AW1_defconfig2
-rw-r--r--configs/Ampe_A76_defconfig2
-rw-r--r--configs/CSQ_CS908_defconfig2
-rw-r--r--configs/Chuwi_V7_CW0825_defconfig2
-rw-r--r--configs/Et_q8_v1_6_defconfig2
-rw-r--r--configs/Hyundai_A7HD_defconfig2
-rw-r--r--configs/Ippo_q8h_v1_2_a33_1024x600_defconfig2
-rw-r--r--configs/Ippo_q8h_v1_2_defconfig2
-rw-r--r--configs/Ippo_q8h_v5_defconfig2
-rw-r--r--configs/MSI_Primo81_defconfig2
-rw-r--r--configs/Mele_A1000G_quad_defconfig2
-rw-r--r--configs/Mini-X_defconfig2
-rw-r--r--configs/TZX-Q8-713B7_defconfig2
-rw-r--r--configs/UTOO_P66_defconfig2
-rw-r--r--configs/Yones_Toptech_BD1078_defconfig2
-rw-r--r--configs/ba10_tv_box_defconfig2
-rw-r--r--configs/forfun_q88db_defconfig2
-rw-r--r--configs/ga10h_v1_1_defconfig2
-rw-r--r--configs/iNet_3F_defconfig2
-rw-r--r--configs/iNet_3W_defconfig2
-rw-r--r--configs/iNet_86VS_defconfig2
-rw-r--r--drivers/usb/musb-new/Kconfig14
23 files changed, 35 insertions, 30 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 441c880..e1c5e1d 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -539,15 +539,6 @@ config VIDEO_LCD_TL059WV5C0
endchoice
-config USB_MUSB_SUNXI
- bool "Enable sunxi OTG / DRC USB controller in host mode"
- default n
- ---help---
- Say y here to enable support for the sunxi OTG / DRC USB controller
- used on almost all sunxi boards. Note currently u-boot can only have
- one usb host controller enabled at a time, so enabling this on boards
- which also use the ehci host controller will result in build errors.
-
config USB_KEYBOARD
boolean "Enable USB keyboard support"
default y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index e1262e6..ff7abfa 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index 2ee0307..1d36919 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index fe88a7b..7c8eca8 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -15,4 +15,4 @@ CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index cb659c9..4011351 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig
index 2783347..ca8db19 100644
--- a/configs/Et_q8_v1_6_defconfig
+++ b/configs/Et_q8_v1_6_defconfig
@@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 06fdd2a..065a3f9 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH9"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
index fda7683..213de5a 100644
--- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
+++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
@@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
index 490cbe2..ff5ec30 100644
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ b/configs/Ippo_q8h_v1_2_defconfig
@@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index aa1eb69..b67206c 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index b3b21cb..b089e97 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo
CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_KEYBOARD is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index ffc8d9b..5e31ef6 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -17,4 +17,4 @@ CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index c721c87..00b6c63 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -9,5 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 6a716bd..3508834 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index d59a044..0266299 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -15,7 +15,7 @@ CONFIG_VIDEO_LCD_RESET="PG11"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index 22b51a2..27f2e2b 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -16,7 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index ae302c5..5b5fc12 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -12,5 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
index 8f10c25..6fff725 100644
--- a/configs/forfun_q88db_defconfig
+++ b/configs/forfun_q88db_defconfig
@@ -9,7 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index e766db4..098284d 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -14,7 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index c4611cf..22d0caf 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index d75eb21..c296c0c 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index b9f2066..33162d1 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -9,7 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index 34a8474..0082ff8 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -12,3 +12,17 @@ config USB_MUSB_GADGET
bool "MUSB gadget mode support"
help
Enables the MUSB USB dual-role controller in gadget mode.
+
+if USB_MUSB_HOST || USB_MUSB_GADGET
+
+config USB_MUSB_SUNXI
+ bool "Enable sunxi OTG / DRC USB controller"
+ depends on ARCH_SUNXI
+ default y
+ ---help---
+ Say y here to enable support for the sunxi OTG / DRC USB controller
+ used on almost all sunxi boards. Note currently u-boot can only have
+ one usb host controller enabled at a time, so enabling this on boards
+ which also use the ehci host controller will result in build errors.
+
+endif