summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/keystone/clock-k2e.c16
-rw-r--r--arch/arm/cpu/armv7/keystone/clock-k2hk.c32
-rw-r--r--arch/arm/cpu/armv7/keystone/clock.c43
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c38
-rw-r--r--arch/arm/cpu/armv7/omap-common/hwinit-common.c3
-rw-r--r--arch/arm/cpu/armv7/omap5/hw_data.c2
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram.c60
-rw-r--r--arch/arm/include/asm/arch-keystone/clock-k2e.h16
-rw-r--r--arch/arm/include/asm/arch-keystone/clock-k2hk.h14
-rw-r--r--arch/arm/include/asm/arch-keystone/clock.h4
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware.h4
-rw-r--r--arch/arm/include/asm/arch-omap5/mem.h12
-rw-r--r--board/compulab/cm_t54/cm_t54.c6
-rw-r--r--board/ti/am335x/Kconfig9
-rw-r--r--board/ti/am335x/board.c19
-rw-r--r--board/ti/am335x/mux.c156
-rw-r--r--board/ti/am43xx/board.c1
-rw-r--r--board/ti/am43xx/mux.c43
-rw-r--r--board/ti/dra7xx/evm.c31
-rw-r--r--board/ti/dra7xx/mux_data.h61
-rw-r--r--board/ti/ks2_evm/board_k2e.c23
-rw-r--r--board/ti/ks2_evm/board_k2hk.c29
-rw-r--r--common/Makefile12
-rw-r--r--configs/am335x_evm_defconfig3
-rw-r--r--configs/am335x_evm_nor_defconfig3
-rw-r--r--configs/am335x_evm_norboot_defconfig3
-rw-r--r--configs/am335x_evm_spiboot_defconfig3
-rw-r--r--configs/am335x_evm_uart1_defconfig4
-rw-r--r--configs/am335x_evm_uart2_defconfig4
-rw-r--r--configs/am335x_evm_uart3_defconfig4
-rw-r--r--configs/am335x_evm_uart4_defconfig4
-rw-r--r--configs/am335x_evm_uart5_defconfig4
-rw-r--r--configs/am335x_evm_usbspl_defconfig3
-rw-r--r--doc/README.cfi13
-rw-r--r--include/configs/am335x_evm.h67
-rw-r--r--include/configs/am43xx_evm.h64
-rw-r--r--include/configs/cm_t54.h3
-rw-r--r--include/configs/dra7xx_evm.h89
-rw-r--r--include/configs/pcm051.h140
-rw-r--r--include/configs/tam3517-common.h1
-rw-r--r--include/configs/ti_armv7_common.h19
-rw-r--r--include/configs/tseries.h6
42 files changed, 679 insertions, 392 deletions
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2e.c b/arch/arm/cpu/armv7/keystone/clock-k2e.c
index 42092e1..31f6661 100644
--- a/arch/arm/cpu/armv7/keystone/clock-k2e.c
+++ b/arch/arm/cpu/armv7/keystone/clock-k2e.c
@@ -17,6 +17,22 @@ const struct keystone_pll_regs keystone_pll_regs[] = {
[DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
};
+int dev_speeds[] = {
+ SPD800,
+ SPD850,
+ SPD1000,
+ SPD1250,
+ SPD1350,
+ SPD1400,
+ SPD1500,
+ SPD1400,
+ SPD1350,
+ SPD1250,
+ SPD1000,
+ SPD850,
+ SPD800
+};
+
/**
* pll_freq_get - get pll frequency
* Fout = Fref * NF(mult) / NR(prediv) / OD
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2hk.c b/arch/arm/cpu/armv7/keystone/clock-k2hk.c
index 96a9f72..1591960 100644
--- a/arch/arm/cpu/armv7/keystone/clock-k2hk.c
+++ b/arch/arm/cpu/armv7/keystone/clock-k2hk.c
@@ -19,6 +19,38 @@ const struct keystone_pll_regs keystone_pll_regs[] = {
[DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
};
+int dev_speeds[] = {
+ SPD800,
+ SPD1000,
+ SPD1200,
+ SPD800,
+ SPD800,
+ SPD800,
+ SPD800,
+ SPD800,
+ SPD1200,
+ SPD1000,
+ SPD800,
+ SPD800,
+ SPD800,
+};
+
+int arm_speeds[] = {
+ SPD800,
+ SPD1000,
+ SPD1200,
+ SPD1350,
+ SPD1400,
+ SPD800,
+ SPD1400,
+ SPD1350,
+ SPD1200,
+ SPD1000,
+ SPD800,
+ SPD800,
+ SPD800,
+};
+
/**
* pll_freq_get - get pll frequency
* Fout = Fref * NF(mult) / NR(prediv) / OD
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c
index 03c1d9f..30d76a6 100644
--- a/arch/arm/cpu/armv7/keystone/clock.c
+++ b/arch/arm/cpu/armv7/keystone/clock.c
@@ -11,6 +11,8 @@
#include <asm/arch/clock.h>
#include <asm/arch/clock_defs.h>
+#define MAX_SPEEDS 13
+
static void wait_for_completion(const struct pll_init_data *data)
{
int i;
@@ -218,3 +220,44 @@ void init_plls(int num_pll, struct pll_init_data *config)
for (i = 0; i < num_pll; i++)
init_pll(&config[i]);
}
+
+static int get_max_speed(u32 val, int *speeds)
+{
+ int j;
+
+ if (!val)
+ return speeds[0];
+
+ for (j = 1; j < MAX_SPEEDS; j++) {
+ if (val == 1)
+ return speeds[j];
+ val >>= 1;
+ }
+
+ return SPD800;
+}
+
+#ifdef CONFIG_SOC_K2HK
+static u32 read_efuse_bootrom(void)
+{
+ return (cpu_revision() > 1) ? __raw_readl(KS2_EFUSE_BOOTROM) :
+ __raw_readl(KS2_REV1_DEVSPEED);
+}
+#else
+static inline u32 read_efuse_bootrom(void)
+{
+ return __raw_readl(KS2_EFUSE_BOOTROM);
+}
+#endif
+
+inline int get_max_dev_speed(void)
+{
+ return get_max_speed(read_efuse_bootrom() & 0xffff, dev_speeds);
+}
+
+#ifndef CONFIG_SOC_K2E
+inline int get_max_arm_speed(void)
+{
+ return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 71c0cc8..c8e9bc8 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -242,46 +242,10 @@ static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs)
__udelay(130);
}
-static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- u32 fifo_reg;
-
- fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_1);
- writel(fifo_reg | 0x00000100,
- &emif->emif_ddr_fifo_misaligned_clear_1);
-
- fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_2);
- writel(fifo_reg | 0x00000100,
- &emif->emif_ddr_fifo_misaligned_clear_2);
-
- /* Launch Full leveling */
- writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
-
- /* Wait till full leveling is complete */
- readl(&emif->emif_rd_wr_lvl_ctl);
- __udelay(130);
-
- /* Read data eye leveling no of samples */
- config_data_eye_leveling_samples(base);
-
- /*
- * Disable leveling. This is because if leveling is kept
- * enabled, then PHY triggers a false leveling during
- * EMIF-idle scenario which results in wrong delay
- * values getting updated. After this the EMIF becomes
- * unaccessible. So disable it after the first time
- */
- writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl);
-}
-
static void ddr3_leveling(u32 base, const struct emif_regs *regs)
{
if (is_omap54xx())
omap5_ddr3_leveling(base, regs);
- else
- dra7_ddr3_leveling(base, regs);
}
static void ddr3_init(u32 base, const struct emif_regs *regs)
@@ -1383,7 +1347,7 @@ void sdram_init(void)
}
if (sdram_type == EMIF_SDRAM_TYPE_DDR3 &&
- (!in_sdram && !warm_reset())) {
+ (!in_sdram && !warm_reset()) && (!is_dra7xx())) {
if (emif1_enabled)
do_bug0039_workaround(EMIF1_BASE);
if (emif2_enabled)
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 1b4477f..dd52e93 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -140,6 +140,9 @@ void s_init(void)
#endif
prcm_init();
#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+ board_early_init_f();
+#endif
/* For regular u-boot sdram_init() is called from dram_init() */
sdram_init();
#endif
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 4baca11..ed89f85 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -556,7 +556,7 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = {
.ctrl_ddrio_1 = 0x84210840,
.ctrl_ddrio_2 = 0x84210000,
.ctrl_emif_sdram_config_ext = 0x0001C1A7,
- .ctrl_emif_sdram_config_ext_final = 0x000101A7,
+ .ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
};
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index e2ebab8..9105121 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -145,18 +145,18 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
.sdram_tim3 = 0x027F88A8,
- .read_idle_ctrl = 0x00050000,
+ .read_idle_ctrl = 0x00050001,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400A,
- .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_phy_ctlr_1_init = 0x0E24400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
- .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.emif_rd_wr_exec_thresh = 0x00000305
};
@@ -169,18 +169,18 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
.sdram_tim3 = 0x027F88A8,
- .read_idle_ctrl = 0x00050000,
+ .read_idle_ctrl = 0x00050001,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400A,
- .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_phy_ctlr_1_init = 0x0E24400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
- .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.emif_rd_wr_exec_thresh = 0x00000305
};
@@ -394,24 +394,24 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {
const u32
dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
- 0x00B000B0,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00800080,
- 0x00800080,
- 0x00800080,
- 0x00800080,
- 0x00800080,
+ 0x00BB00BB,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
0x00600060,
0x00600060,
0x00600060,
0x00600060,
0x00600060,
- 0x00800080,
- 0x00800080,
+ 0x00000000,
+ 0x00600020,
0x40010080,
0x08102040,
0x0,
@@ -439,7 +439,7 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
0x00600060,
0x00600060,
0x00600060,
- 0x0,
+ 0x00000000,
0x00600020,
0x40010080,
0x08102040,
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2e.h b/arch/arm/include/asm/arch-keystone/clock-k2e.h
index 4147811..df33a78 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2e.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2e.h
@@ -56,10 +56,26 @@ enum pll_type_e {
DDR3_PLL,
};
+enum {
+ SPD800,
+ SPD850,
+ SPD1000,
+ SPD1250,
+ SPD1350,
+ SPD1400,
+ SPD1500,
+ SPD_RSV
+};
+
#define CORE_PLL_800 {CORE_PLL, 16, 1, 2}
+#define CORE_PLL_850 {CORE_PLL, 17, 1, 2}
#define CORE_PLL_1000 {CORE_PLL, 20, 1, 2}
#define CORE_PLL_1200 {CORE_PLL, 24, 1, 2}
#define PASS_PLL_1000 {PASS_PLL, 20, 1, 2}
+#define CORE_PLL_1250 {CORE_PLL, 25, 1, 2}
+#define CORE_PLL_1350 {CORE_PLL, 27, 1, 2}
+#define CORE_PLL_1400 {CORE_PLL, 28, 1, 2}
+#define CORE_PLL_1500 {CORE_PLL, 30, 1, 2}
#define DDR3_PLL_200 {DDR3_PLL, 4, 1, 2}
#define DDR3_PLL_400 {DDR3_PLL, 16, 1, 4}
#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2}
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
index 784a0be..bdb869b 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
@@ -63,21 +63,35 @@ enum pll_type_e {
DDR3B_PLL,
};
+enum {
+ SPD800,
+ SPD1000,
+ SPD1200,
+ SPD1350,
+ SPD1400,
+ SPD_RSV
+};
+
#define CORE_PLL_799 {CORE_PLL, 13, 1, 2}
#define CORE_PLL_983 {CORE_PLL, 16, 1, 2}
+#define CORE_PLL_999 {CORE_PLL, 122, 15, 1}
#define CORE_PLL_1167 {CORE_PLL, 19, 1, 2}
#define CORE_PLL_1228 {CORE_PLL, 20, 1, 2}
+#define CORE_PLL_1200 {CORE_PLL, 625, 32, 2}
#define PASS_PLL_1228 {PASS_PLL, 20, 1, 2}
#define PASS_PLL_983 {PASS_PLL, 16, 1, 2}
#define PASS_PLL_1050 {PASS_PLL, 205, 12, 2}
#define TETRIS_PLL_500 {TETRIS_PLL, 8, 1, 2}
#define TETRIS_PLL_750 {TETRIS_PLL, 12, 1, 2}
+#define TETRIS_PLL_800 {TETRIS_PLL, 32, 5, 1}
#define TETRIS_PLL_687 {TETRIS_PLL, 11, 1, 2}
#define TETRIS_PLL_625 {TETRIS_PLL, 10, 1, 2}
#define TETRIS_PLL_812 {TETRIS_PLL, 13, 1, 2}
#define TETRIS_PLL_875 {TETRIS_PLL, 14, 1, 2}
+#define TETRIS_PLL_1000 {TETRIS_PLL, 40, 5, 1}
#define TETRIS_PLL_1188 {TETRIS_PLL, 19, 2, 1}
#define TETRIS_PLL_1200 {TETRIS_PLL, 48, 5, 1}
+#define TETRIS_PLL_1350 {TETRIS_PLL, 54, 5, 1}
#define TETRIS_PLL_1375 {TETRIS_PLL, 22, 2, 1}
#define TETRIS_PLL_1400 {TETRIS_PLL, 56, 5, 1}
#define DDR3_PLL_200(x) {DDR3##x##_PLL, 4, 1, 2}
diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h
index 1513c76..dae000e 100644
--- a/arch/arm/include/asm/arch-keystone/clock.h
+++ b/arch/arm/include/asm/arch-keystone/clock.h
@@ -38,12 +38,16 @@ struct pll_init_data {
};
extern const struct keystone_pll_regs keystone_pll_regs[];
+extern int dev_speeds[];
+extern int arm_speeds[];
void init_plls(int num_pll, struct pll_init_data *config);
void init_pll(const struct pll_init_data *data);
unsigned long clk_get_rate(unsigned int clk);
unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
int clk_set_rate(unsigned int clk, unsigned long hz);
+int get_max_dev_speed(void);
+int get_max_arm_speed(void);
#endif
#endif
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index ddeb06e..d6726a1 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -138,6 +138,10 @@ typedef volatile unsigned int *dv_reg_p;
/* Flag from ks2_debug options to check if DSPs need to stay ON */
#define DBG_LEAVE_DSPS_ON 0x1
+/* Device speed */
+#define KS2_REV1_DEVSPEED (KS2_DEVICE_STATE_CTRL_BASE + 0xc98)
+#define KS2_EFUSE_BOOTROM (KS2_DEVICE_STATE_CTRL_BASE + 0xc90)
+
/* Queue manager */
#define KS2_QM_MANAGER_BASE 0x02a02000
#define KS2_QM_DESC_SETUP_BASE 0x02a03000
diff --git a/arch/arm/include/asm/arch-omap5/mem.h b/arch/arm/include/asm/arch-omap5/mem.h
index d2e708b..3e5d655 100644
--- a/arch/arm/include/asm/arch-omap5/mem.h
+++ b/arch/arm/include/asm/arch-omap5/mem.h
@@ -46,13 +46,13 @@
#define M_NAND_GPMC_CONFIG6 0x16000f80
#define M_NAND_GPMC_CONFIG7 0x00000008
-#define STNOR_GPMC_CONFIG1 0x00001200
-#define STNOR_GPMC_CONFIG2 0x00101000
-#define STNOR_GPMC_CONFIG3 0x00030301
-#define STNOR_GPMC_CONFIG4 0x10041004
-#define STNOR_GPMC_CONFIG5 0x000C1010
+#define STNOR_GPMC_CONFIG1 0x00001000
+#define STNOR_GPMC_CONFIG2 0x001f1f00
+#define STNOR_GPMC_CONFIG3 0x001f1f01
+#define STNOR_GPMC_CONFIG4 0x1f011f01
+#define STNOR_GPMC_CONFIG5 0x001d1f1f
#define STNOR_GPMC_CONFIG6 0x08070280
-#define STNOR_GPMC_CONFIG7 0x00000F48
+#define STNOR_GPMC_CONFIG7 0x00000048
/* max number of GPMC Chip Selects */
#define GPMC_MAX_CS 8
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
index fadfddc..944b723 100644
--- a/board/compulab/cm_t54/cm_t54.c
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -43,7 +43,7 @@ const struct omap_sysinfo sysinfo = {
*/
int board_init(void)
{
- gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100); /* boot param addr */
+ gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
return 0;
}
@@ -89,7 +89,7 @@ uint mmc_get_env_part(struct mmc *mmc)
* If booted from eMMC boot partition then force eMMC
* FIRST boot partition to be env storage
*/
- if (bootmode == BOOT_DEVICE_MMC2_2)
+ if (bootmode == BOOT_DEVICE_MMC2)
bootpart = 1;
return bootpart;
@@ -169,7 +169,7 @@ static int handle_mac_address(void)
return 0;
ret = cl_eeprom_read_mac_addr(enetaddr);
- if (!ret || !is_valid_ether_addr(enetaddr))
+ if (ret || !is_valid_ether_addr(enetaddr))
generate_mac_addr(enetaddr);
if (!is_valid_ether_addr(enetaddr))
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index c3b61af..0e5149c 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -20,4 +20,13 @@ config SYS_CONFIG_NAME
string
default "am335x_evm"
+config CONS_INDEX
+ int "UART used for console"
+ default 1
+ help
+ The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
+ in documentation, etc) available to it. Depending on your specific
+ board you may want something other than UART0 as for example the IDK
+ uses UART3 so enter 4 here.
+
endif
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index d81eec9..0739e60 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -383,24 +383,19 @@ const struct dpll_params *get_dpll_ddr_params(void)
void set_uart_mux_conf(void)
{
-#ifdef CONFIG_SERIAL1
+#if CONFIG_CONS_INDEX == 1
enable_uart0_pin_mux();
-#endif /* CONFIG_SERIAL1 */
-#ifdef CONFIG_SERIAL2
+#elif CONFIG_CONS_INDEX == 2
enable_uart1_pin_mux();
-#endif /* CONFIG_SERIAL2 */
-#ifdef CONFIG_SERIAL3
+#elif CONFIG_CONS_INDEX == 3
enable_uart2_pin_mux();
-#endif /* CONFIG_SERIAL3 */
-#ifdef CONFIG_SERIAL4
+#elif CONFIG_CONS_INDEX == 4
enable_uart3_pin_mux();
-#endif /* CONFIG_SERIAL4 */
-#ifdef CONFIG_SERIAL5
+#elif CONFIG_CONS_INDEX == 5
enable_uart4_pin_mux();
-#endif /* CONFIG_SERIAL5 */
-#ifdef CONFIG_SERIAL6
+#elif CONFIG_CONS_INDEX == 6
enable_uart5_pin_mux();
-#endif /* CONFIG_SERIAL6 */
+#endif
}
void set_mux_conf_regs(void)
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index b2bfda5..f4bb9f8 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -171,91 +171,75 @@ static struct module_pin_mux mii1_pin_mux[] = {
{-1},
};
+#ifdef CONFIG_NAND
static struct module_pin_mux nand_pin_mux[] = {
- {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
- {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
- {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
- {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
- {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
- {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
- {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
- {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
- {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
- {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
- {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
- {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
- {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
- {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
- {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */
+#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
+ {OFFSET(gpmc_ad8), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8 */
+ {OFFSET(gpmc_ad9), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9 */
+ {OFFSET(gpmc_ad10), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */
+ {OFFSET(gpmc_ad11), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */
+ {OFFSET(gpmc_ad12), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */
+ {OFFSET(gpmc_ad13), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */
+ {OFFSET(gpmc_ad14), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */
+ {OFFSET(gpmc_ad15), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */
+#endif
+ {OFFSET(gpmc_wait0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* nWAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN)}, /* nWP */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* nCS */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, /* WEN */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, /* OE */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, /* ADV_ALE */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, /* BE_CLE */
{-1},
};
-
-#if defined(CONFIG_NOR) && !defined(CONFIG_NOR_BOOT)
+#elif defined(CONFIG_NOR)
static struct module_pin_mux bone_norcape_pin_mux[] = {
- {OFFSET(lcd_data0), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A0 */
- {OFFSET(lcd_data1), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A1 */
- {OFFSET(lcd_data2), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A2 */
- {OFFSET(lcd_data3), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A3 */
- {OFFSET(lcd_data4), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A4 */
- {OFFSET(lcd_data5), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A5 */
- {OFFSET(lcd_data6), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A6 */
- {OFFSET(lcd_data7), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A7 */
- {OFFSET(lcd_vsync), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A8 */
- {OFFSET(lcd_hsync), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A9 */
- {OFFSET(lcd_pclk), MODE(1)| PULLUDEN | RXACTIVE}, /* NOR_A10 */
- {OFFSET(lcd_ac_bias_en), MODE(1)| PULLUDEN | RXACTIVE}, /* NOR_A11 */
- {OFFSET(lcd_data8), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A12 */
- {OFFSET(lcd_data9), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A13 */
- {OFFSET(lcd_data10), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A14 */
- {OFFSET(lcd_data11), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A15 */
- {OFFSET(lcd_data12), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A16 */
- {OFFSET(lcd_data13), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A17 */
- {OFFSET(lcd_data14), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A18 */
- {OFFSET(lcd_data15), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A19 */
- {OFFSET(gpmc_ad0), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD0 */
- {OFFSET(gpmc_ad1), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD1 */
- {OFFSET(gpmc_ad2), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD2 */
- {OFFSET(gpmc_ad3), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD3 */
- {OFFSET(gpmc_ad4), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD4 */
- {OFFSET(gpmc_ad5), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD5 */
- {OFFSET(gpmc_ad6), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD6 */
- {OFFSET(gpmc_ad7), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD7 */
- {OFFSET(gpmc_ad8), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD8 */
- {OFFSET(gpmc_ad9), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD9 */
- {OFFSET(gpmc_ad10), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD10 */
- {OFFSET(gpmc_ad11), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD11 */
- {OFFSET(gpmc_ad12), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD12 */
- {OFFSET(gpmc_ad13), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD13 */
- {OFFSET(gpmc_ad14), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD14 */
- {OFFSET(gpmc_ad15), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD15 */
-
- {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN) | RXACTIVE}, /* NOR_CE */
- {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN) | RXACTIVE}, /* NOR_ADVN_ALE */
- {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN | RXACTIVE)},/* NOR_OE */
- {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN | RXACTIVE)},/* NOR_BE0N_CLE */
- {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN | RXACTIVE)}, /* NOR_WEN */
- {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUDEN)}, /* NOR WAIT */
+ {OFFSET(gpmc_a0), MODE(0) | PULLUDDIS}, /* NOR_A0 */
+ {OFFSET(gpmc_a1), MODE(0) | PULLUDDIS}, /* NOR_A1 */
+ {OFFSET(gpmc_a2), MODE(0) | PULLUDDIS}, /* NOR_A2 */
+ {OFFSET(gpmc_a3), MODE(0) | PULLUDDIS}, /* NOR_A3 */
+ {OFFSET(gpmc_a4), MODE(0) | PULLUDDIS}, /* NOR_A4 */
+ {OFFSET(gpmc_a5), MODE(0) | PULLUDDIS}, /* NOR_A5 */
+ {OFFSET(gpmc_a6), MODE(0) | PULLUDDIS}, /* NOR_A6 */
+ {OFFSET(gpmc_a7), MODE(0) | PULLUDDIS}, /* NOR_A7 */
+ {OFFSET(gpmc_ad0), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD0 */
+ {OFFSET(gpmc_ad1), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD1 */
+ {OFFSET(gpmc_ad2), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD2 */
+ {OFFSET(gpmc_ad3), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD3 */
+ {OFFSET(gpmc_ad4), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD4 */
+ {OFFSET(gpmc_ad5), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD5 */
+ {OFFSET(gpmc_ad6), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD6 */
+ {OFFSET(gpmc_ad7), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD7 */
+ {OFFSET(gpmc_ad8), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD8 */
+ {OFFSET(gpmc_ad9), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD9 */
+ {OFFSET(gpmc_ad10), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD10 */
+ {OFFSET(gpmc_ad11), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD11 */
+ {OFFSET(gpmc_ad12), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD12 */
+ {OFFSET(gpmc_ad13), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD13 */
+ {OFFSET(gpmc_ad14), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD14 */
+ {OFFSET(gpmc_ad15), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD15 */
+ {OFFSET(gpmc_csn0), MODE(0) | PULLUDEN | PULLUP_EN}, /* CE */
+ {OFFSET(gpmc_advn_ale), MODE(0) | PULLUDEN | PULLDOWN_EN}, /* ALE */
+ {OFFSET(gpmc_oen_ren), MODE(0) | PULLUDEN | PULLDOWN_EN},/* OEn_REN */
+ {OFFSET(gpmc_be0n_cle), MODE(0) | PULLUDEN | PULLDOWN_EN},/* unused */
+ {OFFSET(gpmc_wen), MODE(0) | PULLUDEN | PULLDOWN_EN}, /* WEN */
+ {OFFSET(gpmc_wait0), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE},/*WAIT*/
{-1},
};
#endif
#if defined(CONFIG_NOR_BOOT)
-static struct module_pin_mux norboot_pin_mux[] = {
- {OFFSET(lcd_data1), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data2), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data3), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data4), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data5), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data6), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data7), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data8), MODE(1) | PULLUDDIS},
- {OFFSET(lcd_data9), MODE(1) | PULLUDDIS},
- {-1},
-};
-
void enable_norboot_pin_mux(void)
{
- configure_module_pin_mux(norboot_pin_mux);
+ configure_module_pin_mux(bone_norcape_pin_mux);
}
#endif
@@ -336,11 +320,12 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
-#ifndef CONFIG_NOR
- configure_module_pin_mux(mmc1_pin_mux);
-#endif
-#if defined(CONFIG_NOR) && !defined(CONFIG_NOR_BOOT)
+#if defined(CONFIG_NAND)
+ configure_module_pin_mux(nand_pin_mux);
+#elif defined(CONFIG_NOR)
configure_module_pin_mux(bone_norcape_pin_mux);
+#else
+ configure_module_pin_mux(mmc1_pin_mux);
#endif
} else if (board_is_gp_evm(header)) {
/* General Purpose EVM */
@@ -351,19 +336,16 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
if (profile & ~PROFILE_2)
configure_module_pin_mux(i2c1_pin_mux);
/* Profiles 2 & 3 don't have NAND */
+#ifdef CONFIG_NAND
if (profile & ~(PROFILE_2 | PROFILE_3))
configure_module_pin_mux(nand_pin_mux);
+#endif
else if (profile == PROFILE_2) {
configure_module_pin_mux(mmc1_pin_mux);
configure_module_pin_mux(spi0_pin_mux);
}
} else if (board_is_idk(header)) {
- /*
- * Industrial Motor Control (IDK)
- * note: IDK console is on UART3 by default.
- * So u-boot mus be build with CONFIG_SERIAL4 and
- * CONFIG_CONS_INDEX=4
- */
+ /* Industrial Motor Control (IDK) */
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_no_cd_pin_mux);
} else if (board_is_evm_sk(header)) {
@@ -377,7 +359,13 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
+#if defined(CONFIG_NAND)
+ configure_module_pin_mux(nand_pin_mux);
+#elif defined(CONFIG_NOR)
+ configure_module_pin_mux(bone_norcape_pin_mux);
+#else
configure_module_pin_mux(mmc1_pin_mux);
+#endif
} else {
puts("Unknown board, cannot configure pinmux.");
hang();
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 51fa9e0..a1c3c17 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -626,6 +626,7 @@ int board_init(void)
modena_init0_bw_integer, modena_init0_watermark_0;
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ gpmc_init();
/* Clear all important bits for DSS errata that may need to be tweaked*/
mreqprio_0 = readl(&cdev->mreqprio_0) & MREQPRIO_0_SAB_INIT1_MASK &
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index 50967e1..a670b0b 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -73,7 +73,38 @@ static struct module_pin_mux gpio5_7_pin_mux[] = {
{-1},
};
-static struct module_pin_mux qspi_pin_mux[] = {
+#ifdef CONFIG_NAND
+static struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */
+#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
+ {OFFSET(gpmc_ad8), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8 */
+ {OFFSET(gpmc_ad9), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9 */
+ {OFFSET(gpmc_ad10), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */
+ {OFFSET(gpmc_ad11), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */
+ {OFFSET(gpmc_ad12), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */
+ {OFFSET(gpmc_ad13), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */
+ {OFFSET(gpmc_ad14), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */
+ {OFFSET(gpmc_ad15), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */
+#endif
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* Wait */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN)}, /* Write Protect */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* Chip-Select */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, /* Write Enable */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, /* Read Enable */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, /* Addr Latch Enable*/
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, /* Byte Enable */
+ {-1},
+};
+#endif
+
+static __maybe_unused struct module_pin_mux qspi_pin_mux[] = {
{OFFSET(gpmc_csn0), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_CS0 */
{OFFSET(gpmc_csn3), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* QSPI_CLK */
{OFFSET(gpmc_advn_ale), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D0 */
@@ -97,12 +128,22 @@ void enable_board_pin_mux(void)
if (board_is_gpevm()) {
configure_module_pin_mux(gpio5_7_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
+#if defined(CONFIG_NAND)
+ configure_module_pin_mux(nand_pin_mux);
+#endif
} else if (board_is_sk()) {
configure_module_pin_mux(rgmii1_pin_mux);
+#if defined(CONFIG_NAND)
+ printf("Error: NAND flash not present on this board\n");
+#endif
configure_module_pin_mux(qspi_pin_mux);
} else if (board_is_eposevm()) {
configure_module_pin_mux(rmii1_pin_mux);
+#if defined(CONFIG_NAND)
+ configure_module_pin_mux(nand_pin_mux);
+#else
configure_module_pin_mux(qspi_pin_mux);
+#endif
}
}
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index ae50d88..5592fc5 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -13,6 +13,8 @@
#include <common.h>
#include <palmas.h>
#include <sata.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sata.h>
@@ -26,6 +28,9 @@
DECLARE_GLOBAL_DATA_PTR;
+/* GPIO 7_11 */
+#define GPIO_DDR_VTT_EN 203
+
const struct omap_sysinfo sysinfo = {
"Board: DRA7xx\n"
};
@@ -272,3 +277,29 @@ int board_eth_init(bd_t *bis)
return ret;
}
#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+/* VTT regulator enable */
+static inline void vtt_regulator_enable(void)
+{
+ if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+ return;
+
+ /* Do not enable VTT for DRA722 */
+ if (omap_revision() == DRA722_ES1_0)
+ return;
+
+ /*
+ * EVM Rev G and later use gpio7_11 for DDR3 termination.
+ * This is safe enough to do on older revs.
+ */
+ gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+ gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+}
+
+int board_early_init_f(void)
+{
+ vtt_regulator_enable();
+ return 0;
+}
+#endif
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 7db7032..7276014 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -21,6 +21,37 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */
{MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
{MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+#if defined(CONFIG_NOR)
+ /* NOR only pin-mux */
+ {GPMC_A0 , M0 | IDIS | PDIS}, /* nor.GPMC_A[0 ] */
+ {GPMC_A1 , M0 | IDIS | PDIS}, /* nor.GPMC_A[1 ] */
+ {GPMC_A2 , M0 | IDIS | PDIS}, /* nor.GPMC_A[2 ] */
+ {GPMC_A3 , M0 | IDIS | PDIS}, /* nor.GPMC_A[3 ] */
+ {GPMC_A4 , M0 | IDIS | PDIS}, /* nor.GPMC_A[4 ] */
+ {GPMC_A5 , M0 | IDIS | PDIS}, /* nor.GPMC_A[5 ] */
+ {GPMC_A6 , M0 | IDIS | PDIS}, /* nor.GPMC_A[6 ] */
+ {GPMC_A7 , M0 | IDIS | PDIS}, /* nor.GPMC_A[7 ] */
+ {GPMC_A8 , M0 | IDIS | PDIS}, /* nor.GPMC_A[8 ] */
+ {GPMC_A9 , M0 | IDIS | PDIS}, /* nor.GPMC_A[9 ] */
+ {GPMC_A10 , M0 | IDIS | PDIS}, /* nor.GPMC_A[10] */
+ {GPMC_A11 , M0 | IDIS | PDIS}, /* nor.GPMC_A[11] */
+ {GPMC_A12 , M0 | IDIS | PDIS}, /* nor.GPMC_A[12] */
+ {GPMC_A13 , M0 | IDIS | PDIS}, /* nor.GPMC_A[13] */
+ {GPMC_A14 , M0 | IDIS | PDIS}, /* nor.GPMC_A[14] */
+ {GPMC_A15 , M0 | IDIS | PDIS}, /* nor.GPMC_A[15] */
+ {GPMC_A16 , M0 | IDIS | PDIS}, /* nor.GPMC_A[16] */
+ {GPMC_A17 , M0 | IDIS | PDIS}, /* nor.GPMC_A[17] */
+ {GPMC_A18 , M0 | IDIS | PDIS}, /* nor.GPMC_A[18] */
+ {GPMC_A19 , M0 | IDIS | PDIS}, /* nor.GPMC_A[19] */
+ {GPMC_A20 , M0 | IDIS | PDIS}, /* nor.GPMC_A[20] */
+ {GPMC_A21 , M0 | IDIS | PDIS}, /* nor.GPMC_A[21] */
+ {GPMC_A22 , M0 | IDIS | PDIS}, /* nor.GPMC_A[22] */
+ {GPMC_A23 , M0 | IDIS | PDIS}, /* nor.GPMC_A[23] */
+ {GPMC_A24 , M0 | IDIS | PDIS}, /* nor.GPMC_A[24] */
+ {GPMC_A25 , M0 | IDIS | PDIS}, /* nor.GPMC_A[25] */
+ {GPMC_A26 , M0 | IDIS | PDIS}, /* nor.GPMC_A[26] */
+#else
+ /* eMMC pinmux */
{GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */
{GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */
{GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */
@@ -31,6 +62,7 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */
{GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */
{GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */
+#endif
#if (CONFIG_CONS_INDEX == 1)
{UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */
{UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */
@@ -68,6 +100,33 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{VIN2A_D21, (IEN | M3)},
{VIN2A_D22, (IEN | M3)},
{VIN2A_D23, (IEN | M3)},
+#if defined(CONFIG_NAND) || defined(CONFIG_NOR)
+ /* NAND / NOR pin-mux */
+ {GPMC_AD0 , M0 | IEN | PDIS}, /* GPMC_AD0 */
+ {GPMC_AD1 , M0 | IEN | PDIS}, /* GPMC_AD1 */
+ {GPMC_AD2 , M0 | IEN | PDIS}, /* GPMC_AD2 */
+ {GPMC_AD3 , M0 | IEN | PDIS}, /* GPMC_AD3 */
+ {GPMC_AD4 , M0 | IEN | PDIS}, /* GPMC_AD4 */
+ {GPMC_AD5 , M0 | IEN | PDIS}, /* GPMC_AD5 */
+ {GPMC_AD6 , M0 | IEN | PDIS}, /* GPMC_AD6 */
+ {GPMC_AD7 , M0 | IEN | PDIS}, /* GPMC_AD7 */
+ {GPMC_AD8 , M0 | IEN | PDIS}, /* GPMC_AD8 */
+ {GPMC_AD9 , M0 | IEN | PDIS}, /* GPMC_AD9 */
+ {GPMC_AD10, M0 | IEN | PDIS}, /* GPMC_AD10 */
+ {GPMC_AD11, M0 | IEN | PDIS}, /* GPMC_AD11 */
+ {GPMC_AD12, M0 | IEN | PDIS}, /* GPMC_AD12 */
+ {GPMC_AD13, M0 | IEN | PDIS}, /* GPMC_AD13 */
+ {GPMC_AD14, M0 | IEN | PDIS}, /* GPMC_AD14 */
+ {GPMC_AD15, M0 | IEN | PDIS}, /* GPMC_AD15 */
+ {GPMC_CS0, M0 | IDIS | PEN | PTU}, /* GPMC chip-select */
+ {GPMC_ADVN_ALE, M0 | IDIS | PEN | PTD}, /* GPMC Addr latch */
+ {GPMC_OEN_REN, M0 | IDIS | PEN | PTU}, /* GPMC Read enable */
+ {GPMC_WEN, M0 | IDIS | PEN | PTU}, /* GPMC Write enable_n */
+ {GPMC_BEN0, M0 | IDIS | PEN | PTD}, /* GPMC Byte/Column En */
+ {GPMC_WAIT0, M0 | IEN | PEN | PTU}, /* GPMC Wait/Ready */
+ /* GPMC_WPN (Write Protect) is controlled by DIP Switch SW10(12) */
+#else
+ /* QSPI pin-mux */
{GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */
{GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */
{GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */
@@ -78,6 +137,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */
{GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */
{GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/
+#endif /* CONFIG_NAND || CONFIG_NOR */
{USB2_DRVVBUS, (M0 | IEN | FSC) },
+ {SPI1_CS1, (PEN | IDIS | M14) },
};
#endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c
index d2499b7..5472a43 100644
--- a/board/ti/ks2_evm/board_k2e.c
+++ b/board/ti/ks2_evm/board_k2e.c
@@ -25,15 +25,30 @@ unsigned int external_clk[ext_clk_count] = {
[usb_clk] = 100000000,
};
-static struct pll_init_data pll_config[] = {
- CORE_PLL_1200,
- PASS_PLL_1000,
+static struct pll_init_data core_pll_config[] = {
+ CORE_PLL_800,
+ CORE_PLL_850,
+ CORE_PLL_1000,
+ CORE_PLL_1250,
+ CORE_PLL_1350,
+ CORE_PLL_1400,
+ CORE_PLL_1500,
};
+
+static struct pll_init_data pa_pll_config =
+ PASS_PLL_1000;
+
#if defined(CONFIG_BOARD_EARLY_INIT_F)
int board_early_init_f(void)
{
- init_plls(ARRAY_SIZE(pll_config), pll_config);
+ int speed;
+
+ speed = get_max_dev_speed();
+ init_pll(&core_pll_config[speed]);
+
+ init_pll(&pa_pll_config);
+
return 0;
}
#endif
diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c
index a369d6b..6fb3d21 100644
--- a/board/ti/ks2_evm/board_k2hk.c
+++ b/board/ti/ks2_evm/board_k2hk.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
@@ -28,12 +29,23 @@ unsigned int external_clk[ext_clk_count] = {
[rp1_clk] = 123456789
};
-static struct pll_init_data pll_config[] = {
- CORE_PLL_1228,
- PASS_PLL_983,
+static struct pll_init_data core_pll_config[] = {
+ CORE_PLL_799,
+ CORE_PLL_999,
+ CORE_PLL_1200,
+};
+
+static struct pll_init_data tetris_pll_config[] = {
+ TETRIS_PLL_800,
+ TETRIS_PLL_1000,
TETRIS_PLL_1200,
+ TETRIS_PLL_1350,
+ TETRIS_PLL_1400,
};
+static struct pll_init_data pa_pll_config =
+ PASS_PLL_983;
+
#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
struct eth_priv_t eth_priv_cfg[] = {
{
@@ -75,7 +87,16 @@ int get_num_eth_ports(void)
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
- init_plls(ARRAY_SIZE(pll_config), pll_config);
+ int speed;
+
+ speed = get_max_dev_speed();
+ init_pll(&core_pll_config[speed]);
+
+ init_pll(&pa_pll_config);
+
+ speed = get_max_arm_speed();
+ init_pll(&tetris_pll_config[speed]);
+
return 0;
}
#endif
diff --git a/common/Makefile b/common/Makefile
index de5cce8..aca0f7f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -219,10 +219,6 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
-# environment
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
ifdef CONFIG_SPL_USB_HOST_SUPPORT
obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
@@ -230,14 +226,16 @@ endif
ifdef CONFIG_SPL_SATA_SUPPORT
obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
endif
-ifneq ($(CONFIG_SPL_NET_SUPPORT),y)
+# environment
+ifdef CONFIG_SPL_ENV_SUPPORT
+obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
+obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
+obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
-else
-obj-y += env_nowhere.o
endif
endif
# core command
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 7710dc0..2e5aeaa 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
+CONFIG_CONS_INDEX=1
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig
index fecec5e..41f31cc 100644
--- a/configs/am335x_evm_nor_defconfig
+++ b/configs/am335x_evm_nor_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,NOR"
+CONFIG_SYS_EXTRA_OPTIONS="NAND,NOR"
+CONFIG_CONS_INDEX=1
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig
index 6005c22..7dbfa27 100644
--- a/configs/am335x_evm_norboot_defconfig
+++ b/configs/am335x_evm_norboot_defconfig
@@ -1,3 +1,4 @@
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NOR,NOR_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="NOR,NOR_BOOT"
+CONFIG_CONS_INDEX=1
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig
index 389d1d8..a6188ea 100644
--- a/configs/am335x_evm_spiboot_defconfig
+++ b/configs/am335x_evm_spiboot_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
+CONFIG_CONS_INDEX=1
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_uart1_defconfig b/configs/am335x_evm_uart1_defconfig
deleted file mode 100644
index 14e8879..0000000
--- a/configs/am335x_evm_uart1_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL2,CONS_INDEX=2,NAND"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_uart2_defconfig b/configs/am335x_evm_uart2_defconfig
deleted file mode 100644
index 706ced9..0000000
--- a/configs/am335x_evm_uart2_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL3,CONS_INDEX=3,NAND"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_uart3_defconfig b/configs/am335x_evm_uart3_defconfig
deleted file mode 100644
index 4706868..0000000
--- a/configs/am335x_evm_uart3_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL4,CONS_INDEX=4,NAND"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_uart4_defconfig b/configs/am335x_evm_uart4_defconfig
deleted file mode 100644
index 8ab7769..0000000
--- a/configs/am335x_evm_uart4_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL5,CONS_INDEX=5,NAND"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_uart5_defconfig b/configs/am335x_evm_uart5_defconfig
deleted file mode 100644
index ea3b761..0000000
--- a/configs/am335x_evm_uart5_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL6,CONS_INDEX=6,NAND"
-+S:CONFIG_ARM=y
-+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig
index b6b30c6..352c1fb 100644
--- a/configs/am335x_evm_usbspl_defconfig
+++ b/configs/am335x_evm_usbspl_defconfig
@@ -1,4 +1,5 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT"
+CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT"
+CONFIG_CONS_INDEX=1
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/doc/README.cfi b/doc/README.cfi
index d087ff0..81e7cf1 100644
--- a/doc/README.cfi
+++ b/doc/README.cfi
@@ -27,3 +27,16 @@ void flash_cmd_reset(flash_info_t *info)
see also:
http://www.mail-archive.com/u-boot@lists.denx.de/msg24368.html
+
+
+Config Option
+
+ CONFIG_SYS_MAX_FLASH_SECT: Number of sectors available on Flash device
+
+ CONFIG_SYS_FLASH_CFI_WIDTH: Data-width of the flash device
+
+ CONFIG_CMD_FLASH: Enables Flash command library
+
+ CONFIG_FLASH_CFI_DRIVER: Enables CFI Flash driver
+
+ CONFIG_FLASH_CFI_MTD: Enables MTD frame work for NOR Flash devices
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 35ae0e6..df1a6fc 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -61,7 +61,7 @@
"${optargs} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
- "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
"nandrootfstype=ubifs rootwait=1\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
@@ -223,22 +223,20 @@
/* USB gadget RNDIS */
#define CONFIG_SPL_MUSB_NEW_SUPPORT
-/* General network SPL, both CPSW and USB gadget RNDIS */
-#define CONFIG_SPL_NET_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
-
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#endif
#ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
+/* NAND: device related configs */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+/* NAND: driver related configs */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
@@ -252,15 +250,34 @@
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#define MTDIDS_DEFAULT "nand0=nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
+ "128k(NAND.SPL)," \
+ "128k(NAND.SPL.backup1)," \
+ "128k(NAND.SPL.backup2)," \
+ "128k(NAND.SPL.backup3)," \
+ "256k(NAND.u-boot-spl-os)," \
+ "1m(NAND.u-boot)," \
+ "128k(NAND.u-boot-env)," \
+ "128k(NAND.u-boot-env.backup1)," \
+ "8m(NAND.kernel)," \
+ "-(NAND.rootfs)"
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x001c0000
+#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
+#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+/* NAND: SPL related configs */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_AM33XX_BCH
+#endif
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
#endif
-#endif
-#endif
+#endif /* !CONFIG_NAND */
/*
* For NOR boot, we must set this to the start of where NOR is mapped
@@ -314,10 +331,10 @@
/* disable EFI partitions and partition UUID support */
#undef CONFIG_PARTITION_UUIDS
#undef CONFIG_EFI_PARTITION
-/*
- * Disable CPSW SPL support so we fit within the 101KiB limit.
- */
-#undef CONFIG_SPL_ETH_SUPPORT
+/* General network SPL */
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
#endif
/* USB Device Firmware Update support */
@@ -399,6 +416,7 @@
#elif defined(CONFIG_EMMC_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SYS_MMC_ENV_DEV 1
#define CONFIG_SYS_MMC_ENV_PART 2
#define CONFIG_ENV_OFFSET 0x0
@@ -417,23 +435,6 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_SMSC
-/* NAND support */
-#ifdef CONFIG_NAND
-#define CONFIG_CMD_NAND
-#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
- "128k(SPL.backup1)," \
- "128k(SPL.backup2)," \
- "128k(SPL.backup3),1792k(u-boot)," \
- "128k(u-boot-spl-os)," \
- "128k(u-boot-env),5m(kernel),-(rootfs)"
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-#endif
-#endif
-
/*
* NOR Size = 16 MiB
* Number of Sectors/Blocks = 128
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index e262040..0707827 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -265,4 +265,68 @@
#define CONFIG_SPL_NET_SUPPORT
#define CONFIG_SYS_RX_ETH_BUFFER 64
+/* NAND support */
+#ifdef CONFIG_NAND
+/* NAND: device related configs */
+#define CONFIG_SYS_NAND_PAGE_SIZE 4096
+#define CONFIG_SYS_NAND_OOBSIZE 224
+#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+/* NAND: driver related configs */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
+ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
+ 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
+ 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
+ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
+ 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
+ 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
+ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
+ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
+ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
+ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
+ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
+ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
+ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
+ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
+ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
+ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
+ }
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 26
+#define MTDIDS_DEFAULT "nand0=nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
+ "256k(NAND.SPL)," \
+ "256k(NAND.SPL.backup1)," \
+ "256k(NAND.SPL.backup2)," \
+ "256k(NAND.SPL.backup3)," \
+ "512k(NAND.u-boot-spl-os)," \
+ "1m(NAND.u-boot)," \
+ "256k(NAND.u-boot-env)," \
+ "256k(NAND.u-boot-env.backup1)," \
+ "7m(NAND.kernel)," \
+ "-(NAND.rootfs)"
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000
+/* NAND: SPL related configs */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_AM33XX_BCH
+#endif
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */
+#define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#endif
+#endif /* !CONFIG_NAND */
+
#endif /* __CONFIG_AM43XX_EVM_H */
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index db04095..df93a59 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -19,6 +19,9 @@
#undef CONFIG_MISC_INIT_R
#undef CONFIG_SPL_OS_BOOT
+/* Enable Generic board */
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Device Tree defines */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 8d0a0eb..4143a4d 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -13,6 +13,7 @@
#define __CONFIG_DRA7XX_EVM_H
#define CONFIG_DRA7XX
+#define CONFIG_BOARD_EARLY_INIT_F
#ifndef CONFIG_QSPI_BOOT
/* MMC ENV related defines */
@@ -143,4 +144,92 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+/* NAND support */
+#ifdef CONFIG_NAND
+/* NAND: device related configs */
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+/* NAND: driver related configs */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 14
+#define MTDIDS_DEFAULT "nand0=nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
+ "128k(NAND.SPL)," \
+ "128k(NAND.SPL.backup1)," \
+ "128k(NAND.SPL.backup2)," \
+ "128k(NAND.SPL.backup3)," \
+ "256k(NAND.u-boot-spl-os)," \
+ "1m(NAND.u-boot)," \
+ "128k(NAND.u-boot-env)," \
+ "128k(NAND.u-boot-env.backup1)," \
+ "8m(NAND.kernel)," \
+ "-(NAND.rootfs)"
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
+/* NAND: SPL related configs */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_AM33XX_BCH
+#endif
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif
+#endif /* !CONFIG_NAND */
+
+/* Parallel NOR Support */
+#if defined(CONFIG_NOR)
+/* NOR: device related configs */
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
+/* #define CONFIG_INIT_IGNORE_ERROR */
+#undef CONFIG_SYS_NO_FLASH
+#define CONFIG_CMD_FLASH
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BASE (0x08000000)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+/* Reduce SPL size by removing unlikey targets */
+#ifdef CONFIG_NOR_BOOT
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */
+#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
+ "128k(NOR.SPL)," \
+ "128k(NOR.SPL.backup1)," \
+ "128k(NOR.SPL.backup2)," \
+ "128k(NOR.SPL.backup3)," \
+ "256k(NOR.u-boot-spl-os)," \
+ "1m(NOR.u-boot)," \
+ "128k(NOR.u-boot-env)," \
+ "128k(NOR.u-boot-env.backup1)," \
+ "8m(NOR.kernel)," \
+ "-(NOR.rootfs)"
+#define CONFIG_ENV_OFFSET 0x001c0000
+#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
+#endif
+#endif /* NOR support */
+
#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index dcf5537..5efcd76 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -19,35 +19,13 @@
#ifndef __CONFIG_PCM051_H
#define __CONFIG_PCM051_H
-#define CONFIG_AM33XX
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
-
-#include <asm/arch/omap.h>
+#include <configs/ti_am335x_common.h>
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "U-Boot# "
-#define CONFIG_SYS_NO_FLASH
#define MACH_TYPE_PCM051 4144 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_PCM051
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_VERSION_VARIABLE
-
/* set to negative value for no autoboot */
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80007fc0\0" \
@@ -104,21 +82,6 @@
#define V_OSCK 25000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#define CONFIG_CMD_ECHO
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
/*
* memtest works on 8 MB in DRAM after skipping 32MB from
* start addr of ram disk
@@ -127,41 +90,13 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ (8 * 1024 * 1024))
-#define CONFIG_SYS_LOAD_ADDR 0x80007fc0 /* Default load address */
-
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
-#define CONFIG_MTD_DEVICE
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 24000000
- /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 19) /* 512MiB */
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
- /* Platform/Board specific defs */
-#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-
#define CONFIG_CONS_INDEX 1
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
@@ -170,65 +105,26 @@
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
/* I2C Configuration */
-#define CONFIG_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP24XX
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_OMAP_GPIO
-
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
/* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
#define CONFIG_ENV_IS_NOWHERE
-/* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-/*
- * Place the image at the start of the ROM defined image space.
- * We limit our size to the ROM-defined downloaded image area, and use the
- * rest of the space for stack.
- */
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
#define CONFIG_SPL_NET_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING "pcm051 U-Boot SPL"
#define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#ifdef CONFIG_SPI_BOOT
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
@@ -236,23 +132,6 @@
#define CONFIG_SPL_SPI_CS 0
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
-
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE 0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-
-/* Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
/*
@@ -282,17 +161,6 @@
/* Unsupported features */
#undef CONFIG_USE_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_NET_MULTI
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index e1fc754..bcf0a63 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -17,6 +17,7 @@
#define CONFIG_OMAP34XX /* which is a 34XX */
#define CONFIG_OMAP_GPIO
#define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_TEXT_BASE 0x80008000
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 26ac251..85171db 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -202,15 +202,18 @@
#define CONFIG_SPL_OS_BOOT
/*
- * Place the image at the start of the ROM defined image space.
- * We limit our size to the ROM-defined downloaded image area, and use the
- * rest of the space for stack. We load U-Boot itself into memory at
- * 0x80800000 for legacy reasons (to not conflict with older SPLs). We
- * have our BSS be placed 1MiB after this, to allow for the default
- * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
- * We have the SPL malloc pool at the end of the BSS area.
+ * Place the image at the start of the ROM defined image space (per
+ * CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
+ * downloaded image area. We initalize DRAM as soon as we can so that
+ * we can place stack, malloc and BSS there. We load U-Boot itself into
+ * memory at 0x80800000 for legacy reasons (to not conflict with older
+ * SPLs). We have our BSS be placed 2MiB after this, to allow for the
+ * default Linux kernel address of 0x80008000 to work with most sized
+ * kernels, in the Falcon Mode case. We have the SPL malloc pool at the
+ * end of the BSS area. We place our stack at 32MiB after the start of
+ * DRAM to allow room for all of the above.
*/
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_STACK (CONFIG_SYS_SDRAM_BASE + (32 << 20))
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x80800000
#endif
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 1fd6e32..1dd13fd 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -243,8 +243,12 @@
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#elif defined(CONFIG_NAND)
-#undef CONFIG_ENV_IS_NOWHERE
+/* No NAND env support in SPL */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_ENV_IS_NOWHERE
+#else
#define CONFIG_ENV_IS_IN_NAND
+#endif
#define CONFIG_ENV_OFFSET 0x120000 /* TODO: Adresse definieren */
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
#else