summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mtd/nand/atmel_nand.c22
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 92547432..16b7df0 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -412,7 +412,7 @@ static int pmecc_err_location(struct mtd_info *mtd)
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+ dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
return -1;
}
@@ -500,7 +500,7 @@ normal_check:
err_nbr = pmecc_err_location(mtd);
if (err_nbr == -1) {
- printk(KERN_ERR "PMECC: Too many errors\n");
+ dev_err(host->dev, "PMECC: Too many errors\n");
mtd->ecc_stats.failed++;
return -EIO;
} else {
@@ -544,7 +544,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
return -1;
}
@@ -584,7 +584,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
}
if (!timeout) {
- printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+ dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
goto out;
}
@@ -849,7 +849,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
}
if (nand->ecc.bytes > mtd->oobsize - 2) {
- printk(KERN_ERR "No room for ECC bytes\n");
+ dev_err(host->dev, "No room for ECC bytes\n");
return -EINVAL;
}
pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
@@ -860,7 +860,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
case 512:
case 1024:
/* TODO */
- printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+ dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
@@ -1043,7 +1043,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
/* it doesn't seems to be a freshly
* erased block.
* We can't correct so many errors */
- printk(KERN_WARNING "atmel_nand : multiple errors detected."
+ dev_warn(host->dev, "atmel_nand : multiple errors detected."
" Unable to correct.\n");
return -EIO;
}
@@ -1053,12 +1053,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
/* there's nothing much to do here.
* the bit error is on the ECC itself.
*/
- printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+ dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
" Nothing to correct\n");
return 0;
}
- printk(KERN_WARNING "atmel_nand : one bit error on data."
+ dev_warn(host->dev, "atmel_nand : one bit error on data."
" (word offset in the page :"
" 0x%x bit offset : 0x%x)\n",
ecc_word, ecc_bit);
@@ -1070,7 +1070,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
/* 8 bits words */
dat[ecc_word] ^= (1 << ecc_bit);
}
- printk(KERN_WARNING "atmel_nand : error corrected\n");
+ dev_warn(host->dev, "atmel_nand : error corrected\n");
return 1;
}
@@ -1226,6 +1226,6 @@ void board_nand_init(void)
int i;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
if (atmel_nand_chip_init(i, base_addr[i]))
- printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip",
+ dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
i);
}