summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/cpu/cpu.c4
-rw-r--r--arch/x86/cpu/start.S95
-rw-r--r--common/board_f.c3
3 files changed, 18 insertions, 84 deletions
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 4f57145..1b76ca1 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -136,8 +136,10 @@ static void load_gdt(const u64 *boot_gdt, u16 num_entries)
asm volatile("lgdtl %0\n" : : "m" (gdt));
}
-void setup_gdt(gd_t *new_gd, u64 *gdt_addr)
+void arch_setup_gd(gd_t *new_gd)
{
+ u64 *gdt_addr;
+
gdt_addr = new_gd->arch.gdt;
/* CS: code, read/execute, 4 GB, base 0 */
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index 313fa3f..e94ddc4 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -104,8 +104,7 @@ car_init_ret:
*
* top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
* MRC area
- * global_data
- * x86 global descriptor table
+ * global_data with x86 global descriptor table
* early malloc area
* stack
* bottom-> CONFIG_SYS_CAR_ADDR
@@ -120,13 +119,10 @@ car_init_ret:
* and esi holds the HOB list address returned by the FSP.
*/
#endif
-
- /* Reserve space on stack for global data */
- subl $GENERATED_GBL_DATA_SIZE, %esp
-
- /* Align global data to 16-byte boundary */
- andl $0xfffffff0, %esp
- post_code(POST_START_STACK)
+ /* Set up global data */
+ mov %esp, %eax
+ call board_init_f_mem
+ mov %eax, %esp
/*
* Debug UART is available here although it may not be plumbed out
@@ -137,56 +133,21 @@ car_init_ret:
* call printch
*/
- /* Zero the global data since it won't happen later */
- xorl %eax, %eax
- movl $GENERATED_GBL_DATA_SIZE, %ecx
- movl %esp, %edi
- rep stosb
-
+ /* Get address of global_data */
+ mov %fs:0, %edx
#ifdef CONFIG_HAVE_FSP
+ /* Store the HOB list if we have one */
test %esi, %esi
jz skip_hob
-
- /* Store HOB list */
- movl %esp, %edx
- addl $GD_HOB_LIST, %edx
- movl %esi, (%edx)
+ movl %esi, GD_HOB_LIST(%edx)
skip_hob:
#else
/* Store table pointer */
- movl %esp, %edx
- addl $GD_TABLE, %edx
- movl %esi, (%edx)
+ movl %esi, GD_TABLE(%edx)
#endif
-
- /* Setup first parameter to setup_gdt, pointer to global_data */
- movl %esp, %eax
-
- /* Reserve space for global descriptor table */
- subl $X86_GDT_SIZE, %esp
-
- /* Align temporary global descriptor table to 16-byte boundary */
- andl $0xfffffff0, %esp
- movl %esp, %ecx
-
-#if defined(CONFIG_SYS_MALLOC_F_LEN)
- /* Set up the pre-relocation malloc pool */
- subl $CONFIG_SYS_MALLOC_F_LEN, %esp
- movl %eax, %edx
- addl $GD_MALLOC_BASE, %edx
- movl %esp, (%edx)
-#endif
- /* Store BIST into global_data */
- movl %eax, %edx
- addl $GD_BIST, %edx
- movl %ebp, (%edx)
-
- /* Set second parameter to setup_gdt() */
- movl %ecx, %edx
-
- /* Setup global descriptor table so gd->xyz works */
- call setup_gdt
+ /* Store BIST */
+ movl %ebp, GD_BIST(%edx)
/* Set parameter to board_init_f() to boot flags */
post_code(POST_START_DONE)
@@ -213,37 +174,7 @@ board_init_f_r_trampoline:
/* Stack grows down from top of SDRAM */
movl %eax, %esp
- /* Reserve space on stack for global data */
- subl $GENERATED_GBL_DATA_SIZE, %esp
-
- /* Align global data to 16-byte boundary */
- andl $0xfffffff0, %esp
-
- /* Setup first parameter to memcpy() and setup_gdt() */
- movl %esp, %eax
-
- /* Setup second parameter to memcpy() */
- fs movl 0, %edx
-
- /* Set third parameter to memcpy() */
- movl $GENERATED_GBL_DATA_SIZE, %ecx
-
- /* Copy global data from CAR to SDRAM stack */
- call memcpy
-
- /* Reserve space for global descriptor table */
- subl $X86_GDT_SIZE, %esp
-
- /* Align global descriptor table to 16-byte boundary */
- andl $0xfffffff0, %esp
-
- /* Set second parameter to setup_gdt() */
- movl %esp, %edx
-
- /* Setup global descriptor table so gd->xyz works */
- call setup_gdt
-
- /* Set if we need to disable CAR */
+ /* See if we need to disable CAR */
.weak car_uninit
movl $car_uninit, %eax
cmpl $0, %eax
diff --git a/common/board_f.c b/common/board_f.c
index 37b7bf5..c959774 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -715,6 +715,7 @@ static int jump_to_copy(void)
* with the stack in SDRAM and Global Data in temporary memory
* (CPU cache)
*/
+ arch_setup_gd(gd->new_gd);
board_init_f_r_trampoline(gd->start_addr_sp);
#else
relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);
@@ -1033,6 +1034,7 @@ __weak void arch_setup_gd(struct global_data *gd_ptr)
{
gd = gd_ptr;
}
+#endif /* !CONFIG_X86 */
ulong board_init_f_mem(ulong top)
{
@@ -1054,4 +1056,3 @@ ulong board_init_f_mem(ulong top)
return top;
}
-#endif /* !CONFIG_X86 */