summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README23
1 files changed, 18 insertions, 5 deletions
diff --git a/README b/README
index 0a0f528..46def00 100644
--- a/README
+++ b/README
@@ -272,7 +272,7 @@ board. This allows feature development which is not board- or architecture-
specific to be undertaken on a native platform. The sandbox is also used to
run some of U-Boot's tests.
-See board/sandbox/sandbox/README.sandbox for more details.
+See board/sandbox/README.sandbox for more details.
Configuration Options:
@@ -538,6 +538,12 @@ The following options need to be configured:
interleaving mode, handled by Dickens for Freescale layerscape
SoCs with ARM core.
+ CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS
+ Number of controllers used as main memory.
+
+ CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
+ Number of controllers used for other than main memory.
+
- Intel Monahans options:
CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
@@ -1629,6 +1635,16 @@ The following options need to be configured:
downloads. This buffer should be as large as possible for a
platform. Define this to the size available RAM for fastboot.
+ CONFIG_FASTBOOT_FLASH
+ The fastboot protocol includes a "flash" command for writing
+ the downloaded image to a non-volatile storage device. Define
+ this to enable the "fastboot flash" command.
+
+ CONFIG_FASTBOOT_FLASH_MMC_DEV
+ The fastboot "flash" command requires additional information
+ regarding the non-volatile storage device. Define this to
+ the eMMC device that fastboot should use to store the image.
+
- Journaling Flash filesystem support:
CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
CONFIG_JFFS2_NAND_DEV
@@ -3849,12 +3865,9 @@ Configuration Settings:
The memory will be freed (or in fact just forgotton) when
U-Boot relocates itself.
- Pre-relocation malloc() is only supported on sandbox
+ Pre-relocation malloc() is only supported on ARM and sandbox
at present but is fairly easy to enable for other archs.
- Pre-relocation malloc() is only supported on ARM at present
- but is fairly easy to enable for other archs.
-
- CONFIG_SYS_BOOTM_LEN:
Normally compressed uImages are limited to an
uncompressed size of 8 MBytes. If this is not enough,