diff options
Diffstat (limited to 'README')
-rw-r--r-- | README | 19 |
1 files changed, 19 insertions, 0 deletions
@@ -442,6 +442,16 @@ The following options need to be configured: crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. + CONFIG_MACH_TYPE [relevant for ARM only][mandatory] + + This setting is mandatory for all boards that have only one + machine type and must be used to specify the machine type + number as it appears in the ARM machine registry + (see http://www.arm.linux.org.uk/developer/machines/). + Only boards that have multiple machine types supported + in a single configuration file and the machine type is + runtime discoverable, do not have to use this setting. + - vxWorks boot parameters: bootvx constructs a valid bootline using the following @@ -3314,6 +3324,15 @@ List of environment variables (most likely not complete): This can be used to load and uncompress arbitrary data. + fdt_high - if set this restricts the maximum address that the + flattened device tree will be copied into upon boot. + If this is set to the special value 0xFFFFFFFF then + the fdt will not be copied at all on boot. For this + to work it must reside in writable memory, have + sufficient padding on the end of it for u-boot to + add the information it needs into it, and the memory + must be accessible by the kernel. + i2cfast - (PPC405GP|PPC405EP only) if set to 'y' configures Linux I2C driver for fast mode (400kHZ). This environment variable is used in |