diff options
Diffstat (limited to 'arch/arm/cpu/arm720t/tegra124/cpu.c')
-rw-r--r-- | arch/arm/cpu/arm720t/tegra124/cpu.c | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/cpu/arm720t/tegra124/cpu.c deleted file mode 100644 index 6ff6aeb..0000000 --- a/arch/arm/cpu/arm720t/tegra124/cpu.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * (C) Copyright 2013 - * NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/ahb.h> -#include <asm/arch/clock.h> -#include <asm/arch/flow.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/ap.h> -#include "../tegra-common/cpu.h" - -/* Tegra124-specific CPU init code */ - -static void enable_cpu_power_rail(void) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - - debug("enable_cpu_power_rail entry\n"); - - /* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */ - pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6); - pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7); - - pmic_enable_cpu_vdd(); - - /* - * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz), - * set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h). - */ - writel(0x7C830, &pmc->pmc_cpupwrgood_timer); - - /* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */ - clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL); - setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE); -} - -static void enable_cpu_clocks(void) -{ - struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg; - - debug("enable_cpu_clocks entry\n"); - - /* Wait for PLL-X to lock */ - do { - reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); - debug("%s: PLLX base = 0x%08X\n", __func__, reg); - } while ((reg & PLL_LOCK_MASK) == 0); - - debug("%s: PLLX locked, delay for stable clocks\n", __func__); - /* Wait until all clocks are stable */ - udelay(PLL_STABILIZATION_DELAY); - - debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__); - writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); - writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); - - debug("%s: Enabling clock to all CPUs\n", __func__); - /* Enable the clock to all CPUs */ - reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP | - CLR_CPU0_CLK_STP; - writel(reg, &clkrst->crc_clk_cpu_cmplx_clr); - - debug("%s: Enabling main CPU complex clocks\n", __func__); - /* Always enable the main CPU complex clocks */ - clock_enable(PERIPH_ID_CPU); - clock_enable(PERIPH_ID_CPULP); - clock_enable(PERIPH_ID_CPUG); - - debug("%s: Done\n", __func__); -} - -static void remove_cpu_resets(void) -{ - struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg; - - debug("remove_cpu_resets entry\n"); - - /* Take the slow and fast partitions out of reset */ - reg = CLR_NONCPURESET; - writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); - writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); - - /* Clear the SW-controlled reset of the slow cluster */ - reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | - CLR_L2RESET | CLR_PRESETDBG; - writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); - - /* Clear the SW-controlled reset of the fast cluster */ - reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | - CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | - CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | - CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 | - CLR_L2RESET | CLR_PRESETDBG; - writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); -} - -/** - * The Tegra124 requires some special clock initialization, including setting up - * the DVC I2C, turning on MSELECT and selecting the G CPU cluster - */ -void tegra124_init_clocks(void) -{ - struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 val; - - debug("tegra124_init_clocks entry\n"); - - /* Set active CPU cluster to G */ - clrbits_le32(&flow->cluster_control, 1); - - /* Change the oscillator drive strength */ - val = readl(&clkrst->crc_osc_ctrl); - val &= ~OSC_XOFS_MASK; - val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT); - writel(val, &clkrst->crc_osc_ctrl); - - /* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */ - val = readl(&pmc->pmc_osc_edpd_over); - val &= ~PMC_XOFS_MASK; - val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT); - writel(val, &pmc->pmc_osc_edpd_over); - - /* Set HOLD_CKE_LOW_EN to 1 */ - setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN); - - debug("Setting up PLLX\n"); - init_pllx(); - - val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT); - writel(val, &clkrst->crc_clk_sys_rate); - - /* Enable clocks to required peripherals. TBD - minimize this list */ - debug("Enabling clocks\n"); - - clock_set_enable(PERIPH_ID_CACHE2, 1); - clock_set_enable(PERIPH_ID_GPIO, 1); - clock_set_enable(PERIPH_ID_TMR, 1); - clock_set_enable(PERIPH_ID_CPU, 1); - clock_set_enable(PERIPH_ID_EMC, 1); - clock_set_enable(PERIPH_ID_I2C5, 1); - clock_set_enable(PERIPH_ID_APBDMA, 1); - clock_set_enable(PERIPH_ID_MEM, 1); - clock_set_enable(PERIPH_ID_CORESIGHT, 1); - clock_set_enable(PERIPH_ID_MSELECT, 1); - clock_set_enable(PERIPH_ID_DVFS, 1); - - /* - * Set MSELECT clock source as PLLP (00), and ask for a clock - * divider that would set the MSELECT clock at 102MHz for a - * PLLP base of 408MHz. - */ - clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, - CLK_DIVIDER(NVBL_PLLP_KHZ, 102000)); - - /* Give clock time to stabilize */ - udelay(IO_STABILIZATION_DELAY); - - /* I2C5 (DVC) gets CLK_M and a divisor of 17 */ - clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16); - - /* Give clock time to stabilize */ - udelay(IO_STABILIZATION_DELAY); - - /* Take required peripherals out of reset */ - debug("Taking periphs out of reset\n"); - reset_set_enable(PERIPH_ID_CACHE2, 0); - reset_set_enable(PERIPH_ID_GPIO, 0); - reset_set_enable(PERIPH_ID_TMR, 0); - reset_set_enable(PERIPH_ID_COP, 0); - reset_set_enable(PERIPH_ID_EMC, 0); - reset_set_enable(PERIPH_ID_I2C5, 0); - reset_set_enable(PERIPH_ID_APBDMA, 0); - reset_set_enable(PERIPH_ID_MEM, 0); - reset_set_enable(PERIPH_ID_CORESIGHT, 0); - reset_set_enable(PERIPH_ID_MSELECT, 0); - reset_set_enable(PERIPH_ID_DVFS, 0); - - debug("tegra124_init_clocks exit\n"); -} - -static bool is_partition_powered(u32 partid) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - u32 reg; - - /* Get power gate status */ - reg = readl(&pmc->pmc_pwrgate_status); - return !!(reg & (1 << partid)); -} - -static void power_partition(u32 partid) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - - debug("%s: part ID = %08X\n", __func__, partid); - /* Is the partition already on? */ - if (!is_partition_powered(partid)) { - /* No, toggle the partition power state (OFF -> ON) */ - debug("power_partition, toggling state\n"); - writel(START_CP | partid, &pmc->pmc_pwrgate_toggle); - - /* Wait for the power to come up */ - while (!is_partition_powered(partid)) - ; - - /* Give I/O signals time to stabilize */ - udelay(IO_STABILIZATION_DELAY); - } -} - -void powerup_cpus(void) -{ - debug("powerup_cpus entry\n"); - - /* We boot to the fast cluster */ - debug("powerup_cpus entry: G cluster\n"); - - /* Power up the fast cluster rail partition */ - debug("powerup_cpus: CRAIL\n"); - power_partition(CRAIL); - - /* Power up the fast cluster non-CPU partition */ - debug("powerup_cpus: C0NC\n"); - power_partition(C0NC); - - /* Power up the fast cluster CPU0 partition */ - debug("powerup_cpus: CE0\n"); - power_partition(CE0); - - debug("powerup_cpus: done\n"); -} - -void start_cpu(u32 reset_vector) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - - debug("start_cpu entry, reset_vector = %x\n", reset_vector); - - tegra124_init_clocks(); - - /* Set power-gating timer multiplier */ - writel((MULT_8 << TIMER_MULT_SHIFT) | (MULT_8 << TIMER_MULT_CPU_SHIFT), - &pmc->pmc_pwrgate_timer_mult); - - enable_cpu_power_rail(); - enable_cpu_clocks(); - clock_enable_coresight(1); - remove_cpu_resets(); - writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); - powerup_cpus(); - debug("start_cpu exit, should continue @ reset_vector\n"); -} |