diff options
Diffstat (limited to 'arch/arm/cpu/tegra114-common/clock.c')
-rw-r--r-- | arch/arm/cpu/tegra114-common/clock.c | 669 |
1 files changed, 0 insertions, 669 deletions
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c deleted file mode 100644 index d5194e1..0000000 --- a/arch/arm/cpu/tegra114-common/clock.c +++ /dev/null @@ -1,669 +0,0 @@ -/* - * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* Tegra114 Clock control functions */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/sysctr.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/timer.h> -#include <div64.h> -#include <fdtdec.h> - -/* - * Clock types that we can use as a source. The Tegra114 has muxes for the - * peripheral clocks, and in most cases there are four options for the clock - * source. This gives us a clock 'type' and exploits what commonality exists - * in the device. - * - * Letters are obvious, except for T which means CLK_M, and S which means the - * clock derived from 32KHz. Beware that CLK_M (also called OSC in the - * datasheet) and PLL_M are different things. The former is the basic - * clock supplied to the SOC from an external oscillator. The latter is the - * memory clock PLL. - * - * See definitions in clock_id in the header file. - */ -enum clock_type_id { - CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ - CLOCK_TYPE_MCPA, /* and so on */ - CLOCK_TYPE_MCPT, - CLOCK_TYPE_PCM, - CLOCK_TYPE_PCMT, - CLOCK_TYPE_PCMT16, - CLOCK_TYPE_PDCT, - CLOCK_TYPE_ACPT, - CLOCK_TYPE_ASPTE, - CLOCK_TYPE_PMDACD2T, - CLOCK_TYPE_PCST, - - CLOCK_TYPE_COUNT, - CLOCK_TYPE_NONE = -1, /* invalid clock type */ -}; - -enum { - CLOCK_MAX_MUX = 8 /* number of source options for each clock */ -}; - -/* - * Clock source mux for each clock type. This just converts our enum into - * a list of mux sources for use by the code. - * - * Note: - * The extra column in each clock source array is used to store the mask - * bits in its register for the source. - */ -#define CLK(x) CLOCK_ID_ ## x -static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { - { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_30}, - { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), - CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_29}, - { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), - CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), - MASK_BITS_31_29}, - { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), - CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), - MASK_BITS_31_28} -}; - -/* - * Clock type for each peripheral clock source. We put the name in each - * record just so it is easy to match things up - */ -#define TYPE(name, type) type -static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { - /* 0x00 */ - TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM), - TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */ - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT), - - /* 0x08 */ - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_I2C5, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), - TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), - - /* 0x10 */ - TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA), - - /* 0x18 */ - TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */ - TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT), - - /* 0x20 */ - TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT), - - /* 0x28 */ - TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT), - - /* 0x30 */ - TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - - /* 0x38h */ /* Jumps to reg offset 0x3B0h */ - TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */ - TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT), - - /* 0x40 */ - TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT), - TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT), - TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT), - TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */ - TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), - - /* 0x48 */ - TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), - TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), - TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */ - TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - - /* 0x50 */ - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */ - TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT), -}; - -/* - * This array translates a periph_id to a periphc_internal_id - * - * Not present/matched up: - * uint vi_sensor; _VI_SENSOR_0, 0x1A8 - * SPDIF - which is both 0x08 and 0x0c - * - */ -#define NONE(name) (-1) -#define OFFSET(name, value) PERIPHC_ ## name -static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { - /* Low word: 31:0 */ - NONE(CPU), - NONE(COP), - NONE(TRIGSYS), - NONE(RESERVED3), - NONE(RTC), - NONE(TMR), - PERIPHC_UART1, - PERIPHC_UART2, /* and vfir 0x68 */ - - /* 8 */ - NONE(GPIO), - PERIPHC_SDMMC2, - NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */ - PERIPHC_I2S1, - PERIPHC_I2C1, - PERIPHC_NDFLASH, - PERIPHC_SDMMC1, - PERIPHC_SDMMC4, - - /* 16 */ - NONE(RESERVED16), - PERIPHC_PWM, - PERIPHC_I2S2, - PERIPHC_EPP, - PERIPHC_VI, - PERIPHC_G2D, - NONE(USBD), - NONE(ISP), - - /* 24 */ - PERIPHC_G3D, - NONE(RESERVED25), - PERIPHC_DISP2, - PERIPHC_DISP1, - PERIPHC_HOST1X, - NONE(VCP), - PERIPHC_I2S0, - NONE(CACHE2), - - /* Middle word: 63:32 */ - NONE(MEM), - NONE(AHBDMA), - NONE(APBDMA), - NONE(RESERVED35), - NONE(RESERVED36), - NONE(STAT_MON), - NONE(RESERVED38), - NONE(RESERVED39), - - /* 40 */ - NONE(KFUSE), - NONE(SBC1), /* SBC1, 0x34, is this SPI1? */ - PERIPHC_NOR, - NONE(RESERVED43), - PERIPHC_SBC2, - NONE(RESERVED45), - PERIPHC_SBC3, - PERIPHC_I2C5, - - /* 48 */ - NONE(DSI), - PERIPHC_TVO, /* also CVE 0x40 */ - PERIPHC_MIPI, - PERIPHC_HDMI, - NONE(CSI), - PERIPHC_TVDAC, - PERIPHC_I2C2, - PERIPHC_UART3, - - /* 56 */ - NONE(RESERVED56), - PERIPHC_EMC, - NONE(USB2), - NONE(USB3), - PERIPHC_MPE, - PERIPHC_VDE, - NONE(BSEA), - NONE(BSEV), - - /* Upper word 95:64 */ - PERIPHC_SPEEDO, - PERIPHC_UART4, - PERIPHC_UART5, - PERIPHC_I2C3, - PERIPHC_SBC4, - PERIPHC_SDMMC3, - NONE(PCIE), - PERIPHC_OWR, - - /* 72 */ - NONE(AFI), - PERIPHC_CSITE, - NONE(PCIEXCLK), - NONE(AVPUCQ), - NONE(RESERVED76), - NONE(RESERVED77), - NONE(RESERVED78), - NONE(DTV), - - /* 80 */ - PERIPHC_NANDSPEED, - PERIPHC_I2CSLOW, - NONE(DSIB), - NONE(RESERVED83), - NONE(IRAMA), - NONE(IRAMB), - NONE(IRAMC), - NONE(IRAMD), - - /* 88 */ - NONE(CRAM2), - NONE(RESERVED89), - NONE(MDOUBLER), - NONE(RESERVED91), - NONE(SUSOUT), - NONE(RESERVED93), - NONE(RESERVED94), - NONE(RESERVED95), - - /* V word: 31:0 */ - NONE(CPUG), - NONE(CPULP), - PERIPHC_G3D2, - PERIPHC_MSELECT, - PERIPHC_TSENSOR, - PERIPHC_I2S3, - PERIPHC_I2S4, - PERIPHC_I2C4, - - /* 08 */ - PERIPHC_SBC5, - PERIPHC_SBC6, - PERIPHC_AUDIO, - NONE(APBIF), - PERIPHC_DAM0, - PERIPHC_DAM1, - PERIPHC_DAM2, - PERIPHC_HDA2CODEC2X, - - /* 16 */ - NONE(ATOMICS), - NONE(RESERVED17), - NONE(RESERVED18), - NONE(RESERVED19), - NONE(RESERVED20), - NONE(RESERVED21), - NONE(RESERVED22), - PERIPHC_ACTMON, - - /* 24 */ - NONE(RESERVED24), - NONE(RESERVED25), - NONE(RESERVED26), - NONE(RESERVED27), - PERIPHC_SATA, - PERIPHC_HDA, - NONE(RESERVED30), - NONE(RESERVED31), - - /* W word: 31:0 */ - NONE(HDA2HDMICODEC), - NONE(RESERVED1_SATACOLD), - NONE(RESERVED2_PCIERX0), - NONE(RESERVED3_PCIERX1), - NONE(RESERVED4_PCIERX2), - NONE(RESERVED5_PCIERX3), - NONE(RESERVED6_PCIERX4), - NONE(RESERVED7_PCIERX5), - - /* 40 */ - NONE(CEC), - NONE(PCIE2_IOBIST), - NONE(EMC_IOBIST), - NONE(HDMI_IOBIST), - NONE(SATA_IOBIST), - NONE(MIPI_IOBIST), - NONE(EMC1_IOBIST), - NONE(XUSB), - - /* 48 */ - NONE(CILAB), - NONE(CILCD), - NONE(CILE), - NONE(DSIA_LP), - NONE(DSIB_LP), - NONE(RESERVED21_ENTROPY), - NONE(RESERVED22_W), - NONE(RESERVED23_W), - - /* 56 */ - NONE(RESERVED24_W), - NONE(AMX0), - NONE(ADX0), - NONE(DVFS), - NONE(XUSB_SS), - NONE(EMC_DLL), - NONE(MC1), - NONE(EMC1), -}; - -/* - * Get the oscillator frequency, from the corresponding hardware configuration - * field. Note that T30/T114 support 3 new higher freqs, but we map back - * to the old T20 freqs. Support for the higher oscillators is TBD. - */ -enum clock_osc_freq clock_get_osc_freq(void) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg; - - reg = readl(&clkrst->crc_osc_ctrl); - reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; - - if (reg & 1) /* one of the newer freqs */ - printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg); - - return reg >> 2; /* Map to most common (T20) freqs */ -} - -/* Returns a pointer to the clock source register for a peripheral */ -u32 *get_periph_source_reg(enum periph_id periph_id) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - enum periphc_internal_id internal_id; - - /* Coresight is a special case */ - if (periph_id == PERIPH_ID_CSI) - return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; - - assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); - internal_id = periph_id_to_internal_id[periph_id]; - assert(internal_id != -1); - if (internal_id >= PERIPHC_VW_FIRST) { - internal_id -= PERIPHC_VW_FIRST; - return &clkrst->crc_clk_src_vw[internal_id]; - } else - return &clkrst->crc_clk_src[internal_id]; -} - -/** - * Given a peripheral ID and the required source clock, this returns which - * value should be programmed into the source mux for that peripheral. - * - * There is special code here to handle the one source type with 5 sources. - * - * @param periph_id peripheral to start - * @param source PLL id of required parent clock - * @param mux_bits Set to number of bits in mux register: 2 or 4 - * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) - */ -int get_periph_clock_source(enum periph_id periph_id, - enum clock_id parent, int *mux_bits, int *divider_bits) -{ - enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; - - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); - - *mux_bits = clock_source[type][CLOCK_MAX_MUX]; - - if (type == CLOCK_TYPE_PCMT16) - *divider_bits = 16; - else - *divider_bits = 8; - - for (mux = 0; mux < CLOCK_MAX_MUX; mux++) - if (clock_source[type][mux] == parent) - return mux; - - /* if we get here, either us or the caller has made a mistake */ - printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, - parent); - return -1; -} - -void clock_set_enable(enum periph_id periph_id, int enable) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 *clk; - u32 reg; - - /* Enable/disable the clock to this peripheral */ - assert(clock_periph_id_isvalid(periph_id)); - if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) - clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; - else - clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; - reg = readl(clk); - if (enable) - reg |= PERIPH_MASK(periph_id); - else - reg &= ~PERIPH_MASK(periph_id); - writel(reg, clk); -} - -void reset_set_enable(enum periph_id periph_id, int enable) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 *reset; - u32 reg; - - /* Enable/disable reset to the peripheral */ - assert(clock_periph_id_isvalid(periph_id)); - if (periph_id < PERIPH_ID_VW_FIRST) - reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; - else - reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; - reg = readl(reset); - if (enable) - reg |= PERIPH_MASK(periph_id); - else - reg &= ~PERIPH_MASK(periph_id); - writel(reg, reset); -} - -#ifdef CONFIG_OF_CONTROL -/* - * Convert a device tree clock ID to our peripheral ID. They are mostly - * the same but we are very cautious so we check that a valid clock ID is - * provided. - * - * @param clk_id Clock ID according to tegra114 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid - */ -enum periph_id clk_id_to_periph_id(int clk_id) -{ - if (clk_id > PERIPH_ID_COUNT) - return PERIPH_ID_NONE; - - switch (clk_id) { - case PERIPH_ID_RESERVED3: - case PERIPH_ID_RESERVED16: - case PERIPH_ID_RESERVED24: - case PERIPH_ID_RESERVED35: - case PERIPH_ID_RESERVED43: - case PERIPH_ID_RESERVED45: - case PERIPH_ID_RESERVED56: - case PERIPH_ID_RESERVED76: - case PERIPH_ID_RESERVED77: - case PERIPH_ID_RESERVED78: - case PERIPH_ID_RESERVED83: - case PERIPH_ID_RESERVED89: - case PERIPH_ID_RESERVED91: - case PERIPH_ID_RESERVED93: - case PERIPH_ID_RESERVED94: - case PERIPH_ID_RESERVED95: - return PERIPH_ID_NONE; - default: - return clk_id; - } -} -#endif /* CONFIG_OF_CONTROL */ - -void clock_early_init(void) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - - tegra30_set_up_pllp(); - - /* - * PLLC output frequency set to 600Mhz - * PLLD output frequency set to 925Mhz - */ - switch (clock_get_osc_freq()) { - case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ - clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); - clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); - break; - - case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ - clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); - clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); - break; - - case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ - clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); - clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); - break; - case CLOCK_OSC_FREQ_19_2: - default: - /* - * These are not supported. It is too early to print a - * message and the UART likely won't work anyway due to the - * oscillator being wrong. - */ - break; - } - - /* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */ - writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]); - - /* PLLC_MISC: Set LOCK_ENABLE */ - writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc); - udelay(2); - - /* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */ - writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); - udelay(2); -} - -void arch_timer_init(void) -{ - struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; - u32 freq, val; - - freq = clock_get_rate(CLOCK_ID_OSC); - debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); - - /* ARM CNTFRQ */ - asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); - - /* Only T114 has the System Counter regs */ - debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); - writel(freq, &sysctr->cntfid0); - - val = readl(&sysctr->cntcr); - val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG; - writel(val, &sysctr->cntcr); - debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); -} |