diff options
Diffstat (limited to 'arch/arm/cpu/tegra20-common/clock.c')
-rw-r--r-- | arch/arm/cpu/tegra20-common/clock.c | 687 |
1 files changed, 0 insertions, 687 deletions
diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c deleted file mode 100644 index 7b9e10c..0000000 --- a/arch/arm/cpu/tegra20-common/clock.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Tegra20 Clock control functions */ - -#include <common.h> -#include <errno.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/timer.h> -#include <div64.h> -#include <fdtdec.h> - -/* - * Clock types that we can use as a source. The Tegra20 has muxes for the - * peripheral clocks, and in most cases there are four options for the clock - * source. This gives us a clock 'type' and exploits what commonality exists - * in the device. - * - * Letters are obvious, except for T which means CLK_M, and S which means the - * clock derived from 32KHz. Beware that CLK_M (also called OSC in the - * datasheet) and PLL_M are different things. The former is the basic - * clock supplied to the SOC from an external oscillator. The latter is the - * memory clock PLL. - * - * See definitions in clock_id in the header file. - */ -enum clock_type_id { - CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ - CLOCK_TYPE_MCPA, /* and so on */ - CLOCK_TYPE_MCPT, - CLOCK_TYPE_PCM, - CLOCK_TYPE_PCMT, - CLOCK_TYPE_PCMT16, /* CLOCK_TYPE_PCMT with 16-bit divider */ - CLOCK_TYPE_PCXTS, - CLOCK_TYPE_PDCT, - - CLOCK_TYPE_COUNT, - CLOCK_TYPE_NONE = -1, /* invalid clock type */ -}; - -enum { - CLOCK_MAX_MUX = 4 /* number of source options for each clock */ -}; - -/* - * Clock source mux for each clock type. This just converts our enum into - * a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS - * is special as it has 5 sources. Since it also has a different number of - * bits in its register for the source, we just handle it with a special - * case in the code. - */ -#define CLK(x) CLOCK_ID_ ## x -static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = { - { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC) }, - { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO) }, - { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(XCPU), CLK(OSC) }, - { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC) }, -}; - -/* - * Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is - * not in the header file since it is for purely internal use - we want - * callers to use the PERIPH_ID for all access to peripheral clocks to avoid - * confusion bewteen PERIPH_ID_... and PERIPHC_... - * - * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be - * confusing. - * - * Note to SOC vendors: perhaps define a unified numbering for peripherals and - * use it for reset, clock enable, clock source/divider and even pinmuxing - * if you can. - */ -enum periphc_internal_id { - /* 0x00 */ - PERIPHC_I2S1, - PERIPHC_I2S2, - PERIPHC_SPDIF_OUT, - PERIPHC_SPDIF_IN, - PERIPHC_PWM, - PERIPHC_SPI1, - PERIPHC_SPI2, - PERIPHC_SPI3, - - /* 0x08 */ - PERIPHC_XIO, - PERIPHC_I2C1, - PERIPHC_DVC_I2C, - PERIPHC_TWC, - PERIPHC_0c, - PERIPHC_10, /* PERIPHC_SPI1, what is this really? */ - PERIPHC_DISP1, - PERIPHC_DISP2, - - /* 0x10 */ - PERIPHC_CVE, - PERIPHC_IDE0, - PERIPHC_VI, - PERIPHC_1c, - PERIPHC_SDMMC1, - PERIPHC_SDMMC2, - PERIPHC_G3D, - PERIPHC_G2D, - - /* 0x18 */ - PERIPHC_NDFLASH, - PERIPHC_SDMMC4, - PERIPHC_VFIR, - PERIPHC_EPP, - PERIPHC_MPE, - PERIPHC_MIPI, - PERIPHC_UART1, - PERIPHC_UART2, - - /* 0x20 */ - PERIPHC_HOST1X, - PERIPHC_21, - PERIPHC_TVO, - PERIPHC_HDMI, - PERIPHC_24, - PERIPHC_TVDAC, - PERIPHC_I2C2, - PERIPHC_EMC, - - /* 0x28 */ - PERIPHC_UART3, - PERIPHC_29, - PERIPHC_VI_SENSOR, - PERIPHC_2b, - PERIPHC_2c, - PERIPHC_SPI4, - PERIPHC_I2C3, - PERIPHC_SDMMC3, - - /* 0x30 */ - PERIPHC_UART4, - PERIPHC_UART5, - PERIPHC_VDE, - PERIPHC_OWR, - PERIPHC_NOR, - PERIPHC_CSITE, - - PERIPHC_COUNT, - - PERIPHC_NONE = -1, -}; - -/* - * Clock type for each peripheral clock source. We put the name in each - * record just so it is easy to match things up - */ -#define TYPE(name, type) type -static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { - /* 0x00 */ - TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM), - TYPE(PERIPHC_PWM, CLOCK_TYPE_PCXTS), - TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SPI22, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SPI3, CLOCK_TYPE_PCMT), - - /* 0x08 */ - TYPE(PERIPHC_XIO, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_TWC, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDCT), - - /* 0x10 */ - TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_IDE0, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA), - - /* 0x18 */ - TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT), - - /* 0x20 */ - TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_HDMI, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT), - - /* 0x28 */ - TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SPI4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT), - - /* 0x30 */ - TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT), -}; - -/* - * This array translates a periph_id to a periphc_internal_id - * - * Not present/matched up: - * uint vi_sensor; _VI_SENSOR_0, 0x1A8 - * SPDIF - which is both 0x08 and 0x0c - * - */ -#define NONE(name) (-1) -#define OFFSET(name, value) PERIPHC_ ## name -static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { - /* Low word: 31:0 */ - NONE(CPU), - NONE(RESERVED1), - NONE(RESERVED2), - NONE(AC97), - NONE(RTC), - NONE(TMR), - PERIPHC_UART1, - PERIPHC_UART2, /* and vfir 0x68 */ - - /* 0x08 */ - NONE(GPIO), - PERIPHC_SDMMC2, - NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */ - PERIPHC_I2S1, - PERIPHC_I2C1, - PERIPHC_NDFLASH, - PERIPHC_SDMMC1, - PERIPHC_SDMMC4, - - /* 0x10 */ - PERIPHC_TWC, - PERIPHC_PWM, - PERIPHC_I2S2, - PERIPHC_EPP, - PERIPHC_VI, - PERIPHC_G2D, - NONE(USBD), - NONE(ISP), - - /* 0x18 */ - PERIPHC_G3D, - PERIPHC_IDE0, - PERIPHC_DISP2, - PERIPHC_DISP1, - PERIPHC_HOST1X, - NONE(VCP), - NONE(RESERVED30), - NONE(CACHE2), - - /* Middle word: 63:32 */ - NONE(MEM), - NONE(AHBDMA), - NONE(APBDMA), - NONE(RESERVED35), - NONE(KBC), - NONE(STAT_MON), - NONE(PMC), - NONE(FUSE), - - /* 0x28 */ - NONE(KFUSE), - NONE(SBC1), /* SBC1, 0x34, is this SPI1? */ - PERIPHC_NOR, - PERIPHC_SPI1, - PERIPHC_SPI2, - PERIPHC_XIO, - PERIPHC_SPI3, - PERIPHC_DVC_I2C, - - /* 0x30 */ - NONE(DSI), - PERIPHC_TVO, /* also CVE 0x40 */ - PERIPHC_MIPI, - PERIPHC_HDMI, - PERIPHC_CSITE, - PERIPHC_TVDAC, - PERIPHC_I2C2, - PERIPHC_UART3, - - /* 0x38 */ - NONE(RESERVED56), - PERIPHC_EMC, - NONE(USB2), - NONE(USB3), - PERIPHC_MPE, - PERIPHC_VDE, - NONE(BSEA), - NONE(BSEV), - - /* Upper word 95:64 */ - NONE(SPEEDO), - PERIPHC_UART4, - PERIPHC_UART5, - PERIPHC_I2C3, - PERIPHC_SPI4, - PERIPHC_SDMMC3, - NONE(PCIE), - PERIPHC_OWR, - - /* 0x48 */ - NONE(AFI), - NONE(CORESIGHT), - NONE(PCIEXCLK), - NONE(AVPUCQ), - NONE(RESERVED76), - NONE(RESERVED77), - NONE(RESERVED78), - NONE(RESERVED79), - - /* 0x50 */ - NONE(RESERVED80), - NONE(RESERVED81), - NONE(RESERVED82), - NONE(RESERVED83), - NONE(IRAMA), - NONE(IRAMB), - NONE(IRAMC), - NONE(IRAMD), - - /* 0x58 */ - NONE(CRAM2), -}; - -/* - * Get the oscillator frequency, from the corresponding hardware configuration - * field. T20 has 4 frequencies that it supports. - */ -enum clock_osc_freq clock_get_osc_freq(void) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg; - - reg = readl(&clkrst->crc_osc_ctrl); - return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; -} - -/* Returns a pointer to the clock source register for a peripheral */ -u32 *get_periph_source_reg(enum periph_id periph_id) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - enum periphc_internal_id internal_id; - - assert(clock_periph_id_isvalid(periph_id)); - internal_id = periph_id_to_internal_id[periph_id]; - assert(internal_id != -1); - return &clkrst->crc_clk_src[internal_id]; -} - -/** - * Given a peripheral ID and the required source clock, this returns which - * value should be programmed into the source mux for that peripheral. - * - * There is special code here to handle the one source type with 5 sources. - * - * @param periph_id peripheral to start - * @param source PLL id of required parent clock - * @param mux_bits Set to number of bits in mux register: 2 or 4 - * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) - */ -int get_periph_clock_source(enum periph_id periph_id, - enum clock_id parent, int *mux_bits, int *divider_bits) -{ - enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; - - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); - - /* - * Special cases here for the clock with a 4-bit source mux and I2C - * with its 16-bit divisor - */ - if (type == CLOCK_TYPE_PCXTS) - *mux_bits = MASK_BITS_31_28; - else - *mux_bits = MASK_BITS_31_30; - if (type == CLOCK_TYPE_PCMT16) - *divider_bits = 16; - else - *divider_bits = 8; - - for (mux = 0; mux < CLOCK_MAX_MUX; mux++) - if (clock_source[type][mux] == parent) - return mux; - - /* - * Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS - * which is not in our table. If not, then they are asking for a - * source which this peripheral can't access through its mux. - */ - assert(type == CLOCK_TYPE_PCXTS); - assert(parent == CLOCK_ID_SFROM32KHZ); - if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ) - return 4; /* mux value for this clock */ - - /* if we get here, either us or the caller has made a mistake */ - printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, - parent); - return -1; -} - -void clock_set_enable(enum periph_id periph_id, int enable) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; - u32 reg; - - /* Enable/disable the clock to this peripheral */ - assert(clock_periph_id_isvalid(periph_id)); - reg = readl(clk); - if (enable) - reg |= PERIPH_MASK(periph_id); - else - reg &= ~PERIPH_MASK(periph_id); - writel(reg, clk); -} - -void reset_set_enable(enum periph_id periph_id, int enable) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; - u32 reg; - - /* Enable/disable reset to the peripheral */ - assert(clock_periph_id_isvalid(periph_id)); - reg = readl(reset); - if (enable) - reg |= PERIPH_MASK(periph_id); - else - reg &= ~PERIPH_MASK(periph_id); - writel(reg, reset); -} - -#ifdef CONFIG_OF_CONTROL -/* - * Convert a device tree clock ID to our peripheral ID. They are mostly - * the same but we are very cautious so we check that a valid clock ID is - * provided. - * - * @param clk_id Clock ID according to tegra20 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid - */ -enum periph_id clk_id_to_periph_id(int clk_id) -{ - if (clk_id > PERIPH_ID_COUNT) - return PERIPH_ID_NONE; - - switch (clk_id) { - case PERIPH_ID_RESERVED1: - case PERIPH_ID_RESERVED2: - case PERIPH_ID_RESERVED30: - case PERIPH_ID_RESERVED35: - case PERIPH_ID_RESERVED56: - case PERIPH_ID_PCIEXCLK: - case PERIPH_ID_RESERVED76: - case PERIPH_ID_RESERVED77: - case PERIPH_ID_RESERVED78: - case PERIPH_ID_RESERVED79: - case PERIPH_ID_RESERVED80: - case PERIPH_ID_RESERVED81: - case PERIPH_ID_RESERVED82: - case PERIPH_ID_RESERVED83: - case PERIPH_ID_RESERVED91: - return PERIPH_ID_NONE; - default: - return clk_id; - } -} -#endif /* CONFIG_OF_CONTROL */ - -void clock_early_init(void) -{ - /* - * PLLP output frequency set to 216MHz - * PLLC output frequency set to 600Mhz - * - * TODO: Can we calculate these values instead of hard-coding? - */ - switch (clock_get_osc_freq()) { - case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); - break; - - case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); - break; - - case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); - break; - case CLOCK_OSC_FREQ_19_2: - default: - /* - * These are not supported. It is too early to print a - * message and the UART likely won't work anyway due to the - * oscillator being wrong. - */ - break; - } -} - -void arch_timer_init(void) -{ -} - -#define PMC_SATA_PWRGT 0x1ac -#define PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5) -#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4) - -#define PLLE_SS_CNTL 0x68 -#define PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24) -#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16) -#define PLLE_SS_CNTL_SSCBYP (1 << 12) -#define PLLE_SS_CNTL_INTERP_RESET (1 << 11) -#define PLLE_SS_CNTL_BYPASS_SS (1 << 10) -#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0) - -#define PLLE_BASE 0x0e8 -#define PLLE_BASE_ENABLE_CML (1 << 31) -#define PLLE_BASE_ENABLE (1 << 30) -#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24) -#define PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16) -#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8) -#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0) - -#define PLLE_MISC 0x0ec -#define PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16) -#define PLLE_MISC_PLL_READY (1 << 15) -#define PLLE_MISC_LOCK (1 << 11) -#define PLLE_MISC_LOCK_ENABLE (1 << 9) -#define PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2) - -static int tegra_plle_train(void) -{ - unsigned int timeout = 2000; - unsigned long value; - - value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT); - value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE; - writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT); - - value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT); - value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL; - writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT); - - value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT); - value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE; - writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT); - - do { - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - if (value & PLLE_MISC_PLL_READY) - break; - - udelay(100); - } while (--timeout); - - if (timeout == 0) { - error("timeout waiting for PLLE to become ready"); - return -ETIMEDOUT; - } - - return 0; -} - -int tegra_plle_enable(void) -{ - unsigned int timeout = 1000; - u32 value; - int err; - - /* disable PLLE clock */ - value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); - value &= ~PLLE_BASE_ENABLE_CML; - value &= ~PLLE_BASE_ENABLE; - writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); - - /* clear lock enable and setup field */ - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - value &= ~PLLE_MISC_LOCK_ENABLE; - value &= ~PLLE_MISC_SETUP_BASE(0xffff); - value &= ~PLLE_MISC_SETUP_EXT(0x3); - writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - if ((value & PLLE_MISC_PLL_READY) == 0) { - err = tegra_plle_train(); - if (err < 0) { - error("failed to train PLLE: %d", err); - return err; - } - } - - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - value |= PLLE_MISC_SETUP_BASE(0x7); - value |= PLLE_MISC_LOCK_ENABLE; - value |= PLLE_MISC_SETUP_EXT(0); - writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET | - PLLE_SS_CNTL_BYPASS_SS; - writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); - value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE; - writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); - - do { - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - if (value & PLLE_MISC_LOCK) - break; - - udelay(2); - } while (--timeout); - - if (timeout == 0) { - error("timeout waiting for PLLE to lock"); - return -ETIMEDOUT; - } - - udelay(50); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f); - value |= PLLE_SS_CNTL_SSCINCINTRV(0x18); - - value &= ~PLLE_SS_CNTL_SSCINC(0xff); - value |= PLLE_SS_CNTL_SSCINC(0x01); - - value &= ~PLLE_SS_CNTL_SSCBYP; - value &= ~PLLE_SS_CNTL_INTERP_RESET; - value &= ~PLLE_SS_CNTL_BYPASS_SS; - - value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff); - value |= PLLE_SS_CNTL_SSCMAX(0x24); - writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - - return 0; -} |