summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/armv7/exynos/common_setup.h62
-rw-r--r--arch/arm/cpu/armv7/exynos/lowlevel_init.c55
-rw-r--r--arch/arm/cpu/armv7/exynos/soc.c53
3 files changed, 77 insertions, 93 deletions
diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h
index e6318c0..5235abb 100644
--- a/arch/arm/cpu/armv7/exynos/common_setup.h
+++ b/arch/arm/cpu/armv7/exynos/common_setup.h
@@ -23,6 +23,8 @@
* MA 02111-1307 USA
*/
+#include <asm/arch/system.h>
+
#define DMC_OFFSET 0x10000
/*
@@ -43,3 +45,63 @@ void system_clock_init(void);
int do_lowlevel_init(void);
void sdelay(unsigned long);
+
+enum l2_cache_params {
+ CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0),
+ CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0),
+ CACHE_DISABLE_CLEAN_EVICT = (1 << 3),
+ CACHE_DATA_RAM_SETUP = (1 << 5),
+ CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6),
+ CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6),
+ CACHE_ENABLE_HAZARD_DETECT = (1 << 7),
+ CACHE_TAG_RAM_SETUP = (1 << 9),
+ CACHE_ECC_AND_PARITY = (1 << 21),
+ CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27)
+};
+
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+/*
+ * Configure L2CTLR to get timings that keep us from hanging/crashing.
+ *
+ * Must be inline here since low_power_start() is called without a
+ * stack (!).
+ */
+static inline void configure_l2_ctlr(void)
+{
+ uint32_t val;
+
+ mrc_l2_ctlr(val);
+
+ val |= CACHE_TAG_RAM_SETUP |
+ CACHE_DATA_RAM_SETUP |
+ CACHE_TAG_RAM_LATENCY_2_CYCLES |
+ CACHE_DATA_RAM_LATENCY_2_CYCLES;
+
+ if (proid_is_exynos5420() || proid_is_exynos5800()) {
+ val |= CACHE_ECC_AND_PARITY |
+ CACHE_TAG_RAM_LATENCY_3_CYCLES |
+ CACHE_DATA_RAM_LATENCY_3_CYCLES;
+ }
+
+ mcr_l2_ctlr(val);
+}
+
+/*
+ * Configure L2ACTLR.
+ *
+ * Must be inline here since low_power_start() is called without a
+ * stack (!).
+ */
+static inline void configure_l2_actlr(void)
+{
+ uint32_t val;
+
+ if (proid_is_exynos5420() || proid_is_exynos5800()) {
+ mrc_l2_aux_ctlr(val);
+ val |= CACHE_ENABLE_FORCE_L2_LOGIC |
+ CACHE_DISABLE_CLEAN_EVICT;
+ mcr_l2_aux_ctlr(val);
+ }
+}
+#endif
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 329ab0c..120aaf8 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -47,42 +47,6 @@ enum {
#ifdef CONFIG_EXYNOS5420
/*
- * Enable ECC by setting L2CTLR[21].
- * Set L2CTLR[7] to make tag ram latency 3 cycles and
- * set L2CTLR[1] to make data ram latency 3 cycles.
- * We need to make RAM latency of 3 cycles here because cores
- * power ON and OFF while switching. And everytime a core powers
- * ON, iROM provides it a default L2CTLR value 0x400 which stands
- * for TAG RAM setup of 1 cycle. Hence, we face a need of
- * restoring data and tag latency values.
- */
-static void configure_l2_ctlr(void)
-{
- uint32_t val;
-
- mrc_l2_ctlr(val);
- val |= (1 << 21);
- val |= (1 << 7);
- val |= (1 << 1);
- mcr_l2_ctlr(val);
-}
-
-/*
- * Set L2ACTLR[27] to prevent the clock generator from stopping
- * the L2 logic clock.
- * Set L2ACTLR[3] to disable clean/evict push to external.
- */
-static void configure_l2_actlr(void)
-{
- uint32_t val;
-
- mrc_l2_aux_ctlr(val);
- val |= (1 << 27);
- val |= (1 << 3);
- mcr_l2_aux_ctlr(val);
-}
-
-/*
* Power up secondary CPUs.
*/
static void secondary_cpu_start(void)
@@ -185,10 +149,6 @@ static void power_down_core(void)
*/
static void secondary_cores_configure(void)
{
- /* Setup L2 cache */
- configure_l2_ctlr();
- v7_enable_l2_hazard_detect();
-
/* Clear secondary boot iRAM base */
writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C));
@@ -214,6 +174,21 @@ int do_lowlevel_init(void)
arch_cpu_init();
+#ifndef CONFIG_SYS_L2CACHE_OFF
+ /*
+ * Init L2 cache parameters here for use by boot and resume
+ *
+ * These are here instead of in v7_outer_cache_enable() so that the
+ * L2 cache settings get properly set even at resume time or if we're
+ * running U-Boot with the cache off. The kernel still needs us to
+ * set these for it.
+ */
+ configure_l2_ctlr();
+ configure_l2_actlr();
+ dsb();
+ isb();
+#endif
+
#ifdef CONFIG_EXYNOS5420
relocate_wait_code();
diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c
index 68eb8e7..0f116b1 100644
--- a/arch/arm/cpu/armv7/exynos/soc.c
+++ b/arch/arm/cpu/armv7/exynos/soc.c
@@ -9,15 +9,6 @@
#include <asm/io.h>
#include <asm/system.h>
-enum l2_cache_params {
- CACHE_TAG_RAM_SETUP = (1 << 9),
- CACHE_DATA_RAM_SETUP = (1 << 5),
- CACHE_TAG_RAM_LATENCY = (2 << 6),
- CACHE_DATA_RAM_LATENCY = (2 << 0),
- CACHE_ENABLE_CLEAN_EVICT = (0 << 3),
- CACHE_DISABLE_CLEAN_EVICT = (1 << 3)
-};
-
void reset_cpu(ulong addr)
{
writel(0x1, samsung_get_base_swreset());
@@ -30,47 +21,3 @@ void enable_caches(void)
dcache_enable();
}
#endif
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-/*
- * Set L2 cache parameters
- */
-static void exynos5_set_l2cache_params(void)
-{
- unsigned int l2ctlr = 0, l2actlr = 0;
-
- /* Read L2CTLR value */
- asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(l2ctlr));
-
- /* Set cache latency cycles */
- l2ctlr |= CACHE_TAG_RAM_LATENCY |
- CACHE_DATA_RAM_LATENCY;
-
- if (proid_is_exynos5420() || proid_is_exynos5800()) {
- /* Read L2ACTLR value */
- asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (l2actlr));
-
- /* Disable clean/evict push to external */
- l2actlr |= CACHE_DISABLE_CLEAN_EVICT;
-
- /* Write new vlaue to L2ACTLR */
- asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (l2actlr));
- } else {
- /* Set cache setup cycles */
- l2ctlr |= CACHE_TAG_RAM_SETUP |
- CACHE_DATA_RAM_SETUP;
- }
-
- /* Write new vlaue to L2CTLR */
- asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(l2ctlr));
-}
-
-/*
- * Sets L2 cache related parameters before enabling data cache
- */
-void v7_outer_cache_enable(void)
-{
- if (cpu_is_exynos5())
- exynos5_set_l2cache_params();
-}
-#endif