1 files changed, 55 insertions, 0 deletions
diff --git a/arch/arm/mach-exynos/include/mach/sromc.h b/arch/arm/mach-exynos/include/mach/sromc.h
new file mode 100644
index 0000000..7f58403
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/sromc.h
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Note: This file contains the register description for SROMC
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SROMC_DATA16_WIDTH(x)    (1<<((x*4)+0))
+#define SROMC_BYTE_ADDR_MODE(x)  (1<<((x*4)+1))  /* 0-> Half-word base address*/
+						/* 1-> Byte base address*/
+#define SROMC_WAIT_ENABLE(x)     (1<<((x*4)+2))
+#define SROMC_BYTE_ENABLE(x)     (1<<((x*4)+3))
+
+#define SROMC_BC_TACS(x) (x << 28) /* address set-up */
+#define SROMC_BC_TCOS(x) (x << 24) /* chip selection set-up */
+#define SROMC_BC_TACC(x) (x << 16) /* access cycle */
+#define SROMC_BC_TCOH(x) (x << 12) /* chip selection hold */
+#define SROMC_BC_TAH(x)  (x << 8)  /* address holding time */
+#define SROMC_BC_TACP(x) (x << 4)  /* page mode access cycle */
+#define SROMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5p_sromc {
+	unsigned int	bw;
+	unsigned int	bc[4];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+enum {
+	FDT_SROM_PMC,
+	FDT_SROM_TACP,
+	FDT_SROM_TAH,
+	FDT_SROM_TCOH,
+	FDT_SROM_TACC,
+	FDT_SROM_TCOS,
+	FDT_SROM_TACS,
+
+	FDT_SROM_TIMING_COUNT,
+};
+
+struct fdt_sromc {
+	u8 bank;	/* srom bank number */
+	u8 width;	/* bus width in bytes */
+	unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */
+};
+
+#endif /* __ASM_ARCH_SROMC_H_ */