diff options
Diffstat (limited to 'arch/arm/mach-omap2/am33xx/board.c')
-rw-r--r-- | arch/arm/mach-omap2/am33xx/board.c | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c new file mode 100644 index 0000000..5ebeac0 --- /dev/null +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -0,0 +1,317 @@ +/* + * board.c + * + * Common board functions for AM33XX based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <ns16550.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <linux/errno.h> +#include <linux/compiler.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/musb.h> +#include <asm/omap_musb.h> +#include <asm/davinci_rtc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if !CONFIG_IS_ENABLED(OF_CONTROL) +static const struct ns16550_platdata am33xx_serial[] = { + { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, +# ifdef CONFIG_SYS_NS16550_COM2 + { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, +# ifdef CONFIG_SYS_NS16550_COM3 + { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, + { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, + { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, + { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2, .clock = CONFIG_SYS_NS16550_CLK }, +# endif +# endif +}; + +U_BOOT_DEVICES(am33xx_uarts) = { + { "ns16550_serial", &am33xx_serial[0] }, +# ifdef CONFIG_SYS_NS16550_COM2 + { "ns16550_serial", &am33xx_serial[1] }, +# ifdef CONFIG_SYS_NS16550_COM3 + { "ns16550_serial", &am33xx_serial[2] }, + { "ns16550_serial", &am33xx_serial[3] }, + { "ns16550_serial", &am33xx_serial[4] }, + { "ns16550_serial", &am33xx_serial[5] }, +# endif +# endif +}; + +#ifdef CONFIG_DM_GPIO +static const struct omap_gpio_platdata am33xx_gpio[] = { + { 0, AM33XX_GPIO0_BASE }, + { 1, AM33XX_GPIO1_BASE }, + { 2, AM33XX_GPIO2_BASE }, + { 3, AM33XX_GPIO3_BASE }, +#ifdef CONFIG_AM43XX + { 4, AM33XX_GPIO4_BASE }, + { 5, AM33XX_GPIO5_BASE }, +#endif +}; + +U_BOOT_DEVICES(am33xx_gpios) = { + { "gpio_omap", &am33xx_gpio[0] }, + { "gpio_omap", &am33xx_gpio[1] }, + { "gpio_omap", &am33xx_gpio[2] }, + { "gpio_omap", &am33xx_gpio[3] }, +#ifdef CONFIG_AM43XX + { "gpio_omap", &am33xx_gpio[4] }, + { "gpio_omap", &am33xx_gpio[5] }, +#endif +}; +#endif +#endif + +#ifndef CONFIG_DM_GPIO +static const struct gpio_bank gpio_bank_am33xx[] = { + { (void *)AM33XX_GPIO0_BASE }, + { (void *)AM33XX_GPIO1_BASE }, + { (void *)AM33XX_GPIO2_BASE }, + { (void *)AM33XX_GPIO3_BASE }, +#ifdef CONFIG_AM43XX + { (void *)AM33XX_GPIO4_BASE }, + { (void *)AM33XX_GPIO5_BASE }, +#endif +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; +#endif + +#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) +int cpu_mmc_init(bd_t *bis) +{ + int ret; + + ret = omap_mmc_init(0, 0, 0, -1, -1); + if (ret) + return ret; + + return omap_mmc_init(1, 0, 0, -1, -1); +} +#endif + +/* AM33XX has two MUSB controllers which can be host or gadget */ +#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \ + (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* USB 2.0 PHY Control */ +#define CM_PHY_PWRDN (1 << 0) +#define CM_PHY_OTG_PWRDN (1 << 1) +#define OTGVDET_EN (1 << 19) +#define OTGSESSENDEN (1 << 20) + +static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) +{ + if (on) { + clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, + OTGVDET_EN | OTGSESSENDEN); + } else { + clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); + } +} + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +#ifdef CONFIG_AM335X_USB0 +static void am33xx_otg0_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); +} + +struct omap_musb_board_data otg0_board_data = { + .set_phy_power = am33xx_otg0_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg0_plat = { + .mode = CONFIG_AM335X_USB0_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg0_board_data, +}; +#endif + +#ifdef CONFIG_AM335X_USB1 +static void am33xx_otg1_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); +} + +struct omap_musb_board_data otg1_board_data = { + .set_phy_power = am33xx_otg1_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg1_plat = { + .mode = CONFIG_AM335X_USB1_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg1_board_data, +}; +#endif +#endif + +int arch_misc_init(void) +{ +#ifdef CONFIG_AM335X_USB0 + musb_register(&otg0_plat, &otg0_board_data, + (void *)USB0_OTG_BASE); +#endif +#ifdef CONFIG_AM335X_USB1 + musb_register(&otg1_plat, &otg1_board_data, + (void *)USB1_OTG_BASE); +#endif + return 0; +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +/* + * In the case of non-SPL based booting we'll want to call these + * functions a tiny bit later as it will require gd to be set and cleared + * and that's not true in s_init in this case so we cannot do it there. + */ +int board_early_init_f(void) +{ + prcm_init(); + set_mux_conf_regs(); + + return 0; +} + +/* + * This function is the place to do per-board things such as ramp up the + * MPU clock frequency. + */ +__weak void am33xx_spl_board_init(void) +{ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) +static void rtc32k_enable(void) +{ + struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(RTC_KICK0R_WE, &rtc->kick0r); + writel(RTC_KICK1R_WE, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} +#endif + +static void uart_soft_reset(void) +{ + struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; + u32 regval; + + regval = readl(&uart_base->uartsyscfg); + regval |= UART_RESET; + writel(regval, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regval = readl(&uart_base->uartsyscfg); + regval |= UART_SMART_IDLE_EN; + writel(regval, &uart_base->uartsyscfg); +} + +static void watchdog_disable(void) +{ + struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; + + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; +} + +void s_init(void) +{ +} + +void early_system_init(void) +{ + /* + * The ROM will only have set up sufficient pinmux to allow for the + * first 4KiB NOR to be read, we must finish doing what we know of + * the NOR mux in this space in order to continue. + */ +#ifdef CONFIG_NOR_BOOT + enable_norboot_pin_mux(); +#endif + watchdog_disable(); + set_uart_mux_conf(); + setup_early_clocks(); + uart_soft_reset(); +#ifdef CONFIG_TI_I2C_BOARD_DETECT + do_board_detect(); +#endif +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) + /* Enable RTC32K clock */ + rtc32k_enable(); +#endif +} + +#ifdef CONFIG_SPL_BUILD +void board_init_f(ulong dummy) +{ + early_system_init(); + board_early_init_f(); + sdram_init(); +} +#endif + +#endif + +int arch_cpu_init_dm(void) +{ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + early_system_init(); +#endif + return 0; +} |