1 files changed, 343 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap3/sys_info.c b/arch/arm/mach-omap2/omap3/sys_info.c
new file mode 100644
index 0000000..6818fab
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3/sys_info.c
@@ -0,0 +1,343 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *      Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *      Richard Woodruff <r-woodruff2@ti.com>
+ *      Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>	/* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/bootm.h>
+
+#include <i2c.h>
+#include <linux/compiler.h>
+
+extern omap3_sysinfo sysinfo;
+static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+static char *rev_s[CPU_3XX_MAX_REV] = {
+				"1.0",
+				"2.0",
+				"2.1",
+				"3.0",
+				"3.1",
+				"UNKNOWN",
+				"UNKNOWN",
+				"3.1.2"};
+
+/* this is the revision table for 37xx CPUs */
+static char *rev_s_37xx[CPU_37XX_MAX_REV] = {
+				"1.0",
+				"1.1",
+				"1.2"};
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+void omap_die_id(unsigned int *die_id)
+{
+	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+
+	die_id[0] = readl(&id_base->die_id_0);
+	die_id[1] = readl(&id_base->die_id_1);
+	die_id[2] = readl(&id_base->die_id_2);
+	die_id[3] = readl(&id_base->die_id_3);
+}
+
+/******************************************
+ * get_cpu_type(void) - extract cpu info
+ ******************************************/
+u32 get_cpu_type(void)
+{
+	return readl(&ctrl_base->ctrl_omap_stat);
+}
+
+/******************************************
+ * get_cpu_id(void) - extract cpu id
+ * returns 0 for ES1.0, cpuid otherwise
+ ******************************************/
+u32 get_cpu_id(void)
+{
+	struct ctrl_id *id_base;
+	u32 cpuid = 0;
+
+	/*
+	 * On ES1.0 the IDCODE register is not exposed on L4
+	 * so using CPU ID to differentiate between ES1.0 and > ES1.0.
+	 */
+	__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
+	if ((cpuid & 0xf) == 0x0) {
+		return 0;
+	} else {
+		/* Decode the IDs on > ES1.0 */
+		id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
+
+		cpuid = readl(&id_base->idcode);
+	}
+
+	return cpuid;
+}
+
+/******************************************
+ * get_cpu_family(void) - extract cpu info
+ ******************************************/
+u32 get_cpu_family(void)
+{
+	u16 hawkeye;
+	u32 cpu_family;
+	u32 cpuid = get_cpu_id();
+
+	if (cpuid == 0)
+		return CPU_OMAP34XX;
+
+	hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
+	switch (hawkeye) {
+	case HAWKEYE_OMAP34XX:
+		cpu_family = CPU_OMAP34XX;
+		break;
+	case HAWKEYE_AM35XX:
+		cpu_family = CPU_AM35XX;
+		break;
+	case HAWKEYE_OMAP36XX:
+		cpu_family = CPU_OMAP36XX;
+		break;
+	default:
+		cpu_family = CPU_OMAP34XX;
+	}
+
+	return cpu_family;
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+	u32 cpuid = get_cpu_id();
+
+	if (cpuid == 0)
+		return CPU_3XX_ES10;
+	else
+		return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf;
+}
+
+/*****************************************************************
+ * get_sku_id(void) - read sku_id to get info on max clock rate
+ *****************************************************************/
+u32 get_sku_id(void)
+{
+	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+	return readl(&id_base->sku_id) & SKUID_CLK_MASK;
+}
+
+/***************************************************************************
+ *  get_gpmc0_base() - Return current address hardware will be
+ *     fetching from. The below effectively gives what is correct, its a bit
+ *   mis-leading compared to the TRM.  For the most general case the mask
+ *   needs to be also taken into account this does work in practice.
+ *   - for u-boot we currently map:
+ *       -- 0 to nothing,
+ *       -- 4 to flash
+ *       -- 8 to enent
+ *       -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+	u32 b;
+
+	b = readl(&gpmc_cfg->cs[0].config7);
+	b &= 0x1F;		/* keep base [5:0] */
+	b = b << 24;		/* ret 0x0b000000 */
+	return b;
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+	return WIDTH_16BIT;
+}
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+ *************************************************************************/
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	return 0x20;
+}
+#endif
+
+/********************************************************
+ *  get_base(); get upper addr of current execution
+ *******************************************************/
+static u32 get_base(void)
+{
+	u32 val;
+
+	__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+	val &= 0xF0000000;
+	val >>= 28;
+	return val;
+}
+
+/********************************************************
+ *  is_running_in_flash() - tell if currently running in
+ *  FLASH.
+ *******************************************************/
+u32 is_running_in_flash(void)
+{
+	if (get_base() < 4)
+		return 1;	/* in FLASH */
+
+	return 0;		/* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ *  is_running_in_sram() - tell if currently running in
+ *  SRAM.
+ *******************************************************/
+u32 is_running_in_sram(void)
+{
+	if (get_base() == 4)
+		return 1;	/* in SRAM */
+
+	return 0;		/* running in FLASH or SDRAM */
+}
+
+/********************************************************
+ *  is_running_in_sdram() - tell if currently running in
+ *  SDRAM.
+ *******************************************************/
+u32 is_running_in_sdram(void)
+{
+	if (get_base() > 4)
+		return 1;	/* in SDRAM */
+
+	return 0;		/* running in SRAM or FLASH */
+}
+
+/***************************************************************
+ *  get_boot_type() - Is this an XIP type device or a stream one
+ *  bits 4-0 specify type. Bit 5 says mem/perif
+ ***************************************************************/
+u32 get_boot_type(void)
+{
+	return (readl(&ctrl_base->status) & SYSBOOT_MASK);
+}
+
+/*************************************************************
+ *  get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+	return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+/**
+ * Print CPU information
+ */
+int print_cpuinfo (void)
+{
+	char *cpu_family_s, *cpu_s, *sec_s, *max_clk;
+
+	switch (get_cpu_family()) {
+	case CPU_OMAP34XX:
+		cpu_family_s = "OMAP";
+		switch (get_cpu_type()) {
+		case OMAP3503:
+			cpu_s = "3503";
+			break;
+		case OMAP3515:
+			cpu_s = "3515";
+			break;
+		case OMAP3525:
+			cpu_s = "3525";
+			break;
+		case OMAP3530:
+			cpu_s = "3530";
+			break;
+		default:
+			cpu_s = "35XX";
+			break;
+		}
+		if ((get_cpu_rev() >= CPU_3XX_ES31) &&
+		    (get_sku_id() == SKUID_CLK_720MHZ))
+			max_clk = "720 MHz";
+		else
+			max_clk = "600 MHz";
+
+		break;
+	case CPU_AM35XX:
+		cpu_family_s = "AM";
+		switch (get_cpu_type()) {
+		case AM3505:
+			cpu_s = "3505";
+			break;
+		case AM3517:
+			cpu_s = "3517";
+			break;
+		default:
+			cpu_s = "35XX";
+			break;
+		}
+		max_clk = "600 Mhz";
+		break;
+	case CPU_OMAP36XX:
+		cpu_family_s = "OMAP";
+		switch (get_cpu_type()) {
+		case OMAP3730:
+			cpu_s = "3630/3730";
+			break;
+		default:
+			cpu_s = "36XX/37XX";
+			break;
+		}
+		max_clk = "1 Ghz";
+		break;
+	default:
+		cpu_family_s = "OMAP";
+		cpu_s = "35XX";
+		max_clk = "600 Mhz";
+	}
+
+	switch (get_device_type()) {
+	case TST_DEVICE:
+		sec_s = "TST";
+		break;
+	case EMU_DEVICE:
+		sec_s = "EMU";
+		break;
+	case HS_DEVICE:
+		sec_s = "HS";
+		break;
+	case GP_DEVICE:
+		sec_s = "GP";
+		break;
+	default:
+		sec_s = "?";
+	}
+
+	if (CPU_OMAP36XX == get_cpu_family())
+		printf("%s%s-%s ES%s, CPU-OPP2, L3-200MHz, Max CPU Clock %s\n",
+		       cpu_family_s, cpu_s, sec_s,
+		       rev_s_37xx[get_cpu_rev()], max_clk);
+	else
+		printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n",
+			cpu_family_s, cpu_s, sec_s,
+			rev_s[get_cpu_rev()], max_clk);
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_CPUINFO */