summaryrefslogtreecommitdiff
path: root/arch/arm/mach-uniphier/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-uniphier/Kconfig')
-rw-r--r--arch/arm/mach-uniphier/Kconfig95
1 files changed, 48 insertions, 47 deletions
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 7b49ad3..22ab798 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -6,49 +6,68 @@ config SYS_CONFIG_NAME
config UNIPHIER_SMP
bool
-choice
- prompt "UniPhier SoC select"
- default MACH_PH1_PRO4
-
-config MACH_PH1_SLD3
- bool "PH1-sLD3"
+config ARCH_UNIPHIER_PH1_SLD3
+ bool "UniPhier PH1-sLD3 SoC"
select UNIPHIER_SMP
+ help
+ This enables support for UniPhier PH1-sLD3 SoC.
-config MACH_PH1_LD4
- bool "PH1-LD4"
+config ARCH_UNIPHIER_PH1_LD4
+ bool "UniPhier PH1-LD4 SoC"
+ depends on !ARCH_UNIPHIER_PH1_SLD3
+ help
+ This enables support for UniPhier PH1-LD4 SoC.
-config MACH_PH1_PRO4
- bool "PH1-Pro4"
+config ARCH_UNIPHIER_PH1_PRO4
+ bool "UniPhier PH1-Pro4 SoC"
select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-Pro4 SoC.
-config MACH_PH1_SLD8
- bool "PH1-sLD8"
-
-endchoice
+config ARCH_UNIPHIER_PH1_SLD8
+ bool "UniPhier PH1-sLD8 SoC"
+ depends on !ARCH_UNIPHIER_PH1_SLD3
+ help
+ This enables support for UniPhier PH1-sLD8 SoC.
-choice
- prompt "UniPhier Support Card select"
- optional
+config ARCH_UNIPHIER_PH1_PRO5
+ bool "UniPhier PH1-Pro5 SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-Pro5 SoC.
-config PFC_MICRO_SUPPORT_CARD
- bool "Support card with PFC CPLD"
+config ARCH_UNIPHIER_PROXSTREAM2
+ bool "UniPhier ProXstream2 SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
help
- This option provides support for the expansion board with PFC
- original address mapping.
+ This enables support for UniPhier ProXstream2 SoC.
- Say Y to use the on-board UART, Ether, LED devices.
+config ARCH_UNIPHIER_PH1_LD6B
+ bool "UniPhier PH1-LD6b SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-LD6b SoC.
-config DCC_MICRO_SUPPORT_CARD
- bool "Support card with DCC CPLD"
+config MICRO_SUPPORT_CARD
+ bool "Use Micro Support Card"
help
- This option provides support for the expansion board with DCC-
- arranged address mapping that is compatible with legacy UniPhier
- reference boards.
+ This option provides support for the expansion board, available
+ on some UniPhier reference boards.
Say Y to use the on-board UART, Ether, LED devices.
-endchoice
-
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
@@ -63,22 +82,4 @@ config CMD_DDRPHY_DUMP
The command "ddrphy" shows the resulting parameters of DDR PHY
training; it is useful for the evaluation of DDR PHY training.
-choice
- prompt "DDR3 Frequency select"
-
-config DDR_FREQ_1600
- bool "DDR3 1600"
- depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4
-
-config DDR_FREQ_1333
- bool "DDR3 1333"
- depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8
-
-endchoice
-
-config DDR_FREQ
- int
- default 1333 if DDR_FREQ_1333
- default 1600 if DDR_FREQ_1600
-
endif