summaryrefslogtreecommitdiff
path: root/arch/arm/mach-uniphier/pll
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-uniphier/pll')
-rw-r--r--arch/arm/mach-uniphier/pll/Makefile8
-rw-r--r--arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c203
-rw-r--r--arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c163
-rw-r--r--arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c13
-rw-r--r--arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c204
-rw-r--r--arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c20
-rw-r--r--arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c21
7 files changed, 632 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile
new file mode 100644
index 0000000..d33f99e
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pll-init-ph1-sld3.o \
+ pll-spectrum-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pll-init-ph1-ld4.o \
+ pll-spectrum-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pll-init-ph1-pro4.o \
+ pll-spectrum-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pll-init-ph1-sld8.o \
+ pll-spectrum-ph1-ld4.o
diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c
new file mode 100644
index 0000000..a272a90
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+#include <mach/sg-regs.h>
+
+#undef DPLL_SSC_RATE_1PER
+
+static int dpll_init(unsigned int dram_freq)
+{
+ u32 tmp;
+
+ /*
+ * Set Frequency
+ * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
+ * to FOUT (DPLLCTRL.bit[29:20])
+ */
+ tmp = readl(SC_DPLLCTRL);
+ tmp &= ~0x000f0000;
+ switch (dram_freq) {
+ case 1333:
+ tmp |= 0x000d0000;
+ break;
+ case 1600:
+ tmp |= 0x000c0000;
+ break;
+ default:
+ pr_err("Unsupported frequency");
+ return -EINVAL;
+ }
+
+#if defined(DPLL_SSC_RATE_1PER)
+ tmp &= ~SC_DPLLCTRL_SSC_RATE;
+#else
+ tmp |= SC_DPLLCTRL_SSC_RATE;
+#endif
+ writel(tmp, SC_DPLLCTRL);
+
+ tmp = readl(SC_DPLLCTRL2);
+ tmp |= SC_DPLLCTRL2_NRSTDS;
+ writel(tmp, SC_DPLLCTRL2);
+
+ return 0;
+}
+
+static void upll_init(void)
+{
+ u32 tmp, clk_mode_upll, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
+ tmp = readl(SC_UPLLCTRL);
+ tmp &= ~0x18000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x0228f5c0;
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x02328000;
+ }
+ }
+
+ writel(tmp, SC_UPLLCTRL);
+
+ /* set 1 to K_LD(UPLLCTRL.bit[27]) */
+ tmp |= 0x08000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* set 1 to SNRT(UPLLCTRL.bit[28]) */
+ tmp |= 0x10000000;
+ writel(tmp, SC_UPLLCTRL);
+}
+
+static void vpll_init(void)
+{
+ u32 tmp, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 1 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+
+ /* Set 0 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27BCTRL3);
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27BCTRL3);
+ }
+
+ /* Set 1 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* set 0 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= ~0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+}
+
+int ph1_ld4_pll_init(const struct uniphier_board_data *bd)
+{
+ int ret;
+
+ ret = dpll_init(bd->dram_freq);
+ if (ret)
+ return ret;
+ upll_init();
+ vpll_init();
+
+ /*
+ * Wait 500 usec until dpll get stable
+ * We wait 10 usec in upll_init() and vpll_init()
+ * so 20 usec can be saved here.
+ */
+ udelay(480);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c
new file mode 100644
index 0000000..906c22f
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+#include <mach/sg-regs.h>
+
+#undef DPLL_SSC_RATE_1PER
+
+static int dpll_init(unsigned int dram_freq)
+{
+ u32 tmp;
+
+ /*
+ * Set Frequency
+ * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
+ * to FOUT ( DPLLCTRL.bit[29:20] )
+ */
+ tmp = readl(SC_DPLLCTRL);
+ tmp &= ~(0x000f0000);
+ switch (dram_freq) {
+ case 1333:
+ tmp |= 0x000d0000;
+ break;
+ case 1600:
+ tmp |= 0x000c0000;
+ break;
+ default:
+ pr_err("Unsupported frequency");
+ return -EINVAL;
+ }
+
+ /*
+ * Set Moduration rate
+ * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15])
+ */
+#if defined(DPLL_SSC_RATE_1PER)
+ tmp &= ~0x00008000;
+#else
+ tmp |= 0x00008000;
+#endif
+ writel(tmp, SC_DPLLCTRL);
+
+ tmp = readl(SC_DPLLCTRL2);
+ tmp |= SC_DPLLCTRL2_NRSTDS;
+ writel(tmp, SC_DPLLCTRL2);
+
+ return 0;
+}
+
+static void vpll_init(void)
+{
+ u32 tmp, clk_mode_axosel;
+
+ /* Set VPLL27A & VPLL27B */
+ tmp = readl(SG_PINMON0);
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
+ return;
+
+ /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+
+ /* Unset VPLA_K_LD and VPLB_K_LD bit */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Set VPLA_M and VPLB_M to 0x20 */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
+ /* Set VPLA_K and VPLB_K for AXO: 25MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066666;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066666;
+ writel(tmp, SC_VPLL27BCTRL3);
+ } else {
+ /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27BCTRL3);
+ }
+
+ /* wait 1 usec */
+ udelay(1);
+
+ /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Unset VPLA_SNRST and VPLB_SNRST bit */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+}
+
+int ph1_pro4_pll_init(const struct uniphier_board_data *bd)
+{
+ int ret;
+
+ ret = dpll_init(bd->dram_freq);
+ if (ret)
+ return ret;
+ vpll_init();
+
+ /*
+ * Wait 500 usec until dpll get stable
+ * We wait 1 usec in vpll_init() so 1 usec can be saved here.
+ */
+ udelay(499);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c
new file mode 100644
index 0000000..6294a45
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <mach/init.h>
+
+int ph1_sld3_pll_init(const struct uniphier_board_data *bd)
+{
+ /* add pll init code here */
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c
new file mode 100644
index 0000000..f249abe
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+#include <mach/sg-regs.h>
+
+static void dpll_init(void)
+{
+ u32 tmp;
+ /*
+ * Set DPLL SSC parameters for DPLLCTRL3
+ * [23] DIVN_TEST 0x1
+ * [22:16] DIVN 0x50
+ * [10] FREFSEL_TEST 0x1
+ * [9:8] FREFSEL 0x2
+ * [4] ICPD_TEST 0x1
+ * [3:0] ICPD 0xb
+ */
+ tmp = readl(SC_DPLLCTRL3);
+ tmp &= ~0x00ff0717;
+ tmp |= 0x00d0061b;
+ writel(tmp, SC_DPLLCTRL3);
+
+ /*
+ * Set DPLL SSC parameters for DPLLCTRL
+ * <-1%> <-2%>
+ * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084)
+ * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6)
+ */
+ tmp = readl(SC_DPLLCTRL);
+ tmp &= ~0x3ff07fff;
+#ifdef CONFIG_DPLL_SSC_RATE_1PER
+ tmp |= 0x084018bf;
+#else
+ tmp |= 0x084031a6;
+#endif
+ writel(tmp, SC_DPLLCTRL);
+
+ /*
+ * Set DPLL SSC parameters for DPLLCTRL2
+ * [31:29] SSC_STEP 0
+ * [27] SSC_REG_REF 1
+ * [26:20] SSC_M 79 (0x4f)
+ * [19:0] SSC_K 964689 (0xeb851)
+ */
+ tmp = readl(SC_DPLLCTRL2);
+ tmp &= ~0xefffffff;
+ tmp |= 0x0cfeb851;
+ writel(tmp, SC_DPLLCTRL2);
+}
+
+static void upll_init(void)
+{
+ u32 tmp, clk_mode_upll, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
+ tmp = readl(SC_UPLLCTRL);
+ tmp &= ~0x18000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x0228f5c0;
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x02328000;
+ }
+ }
+
+ writel(tmp, SC_UPLLCTRL);
+
+ /* set 1 to K_LD(UPLLCTRL.bit[27]) */
+ tmp |= 0x08000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* set 1 to SNRT(UPLLCTRL.bit[28]) */
+ tmp |= 0x10000000;
+ writel(tmp, SC_UPLLCTRL);
+}
+
+static void vpll_init(void)
+{
+ u32 tmp, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 1 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+
+ /* Set 0 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27BCTRL3);
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27BCTRL3);
+ }
+
+ /* Set 1 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* set 0 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= ~0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+}
+
+int ph1_sld8_pll_init(const struct uniphier_board_data *bd)
+{
+ dpll_init();
+ upll_init();
+ vpll_init();
+
+ /*
+ * Wait 500 usec until dpll get stable
+ * We wait 10 usec in upll_init() and vpll_init()
+ * so 20 usec can be saved here.
+ */
+ udelay(480);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c
new file mode 100644
index 0000000..cad0ed8
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+
+ tmp = readl(SC_DPLLCTRL);
+ tmp |= SC_DPLLCTRL_SSC_EN;
+ writel(tmp, SC_DPLLCTRL);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c
new file mode 100644
index 0000000..43dc973
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+
+ tmp = readl(SC_DPLLCTRL);
+ tmp |= SC_DPLLCTRL_SSC_EN;
+ writel(tmp, SC_DPLLCTRL);
+
+ return 0;
+}