summaryrefslogtreecommitdiff
path: root/arch/blackfin/cpu/interrupt.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/cpu/interrupt.S')
-rw-r--r--arch/blackfin/cpu/interrupt.S152
1 files changed, 152 insertions, 0 deletions
diff --git a/arch/blackfin/cpu/interrupt.S b/arch/blackfin/cpu/interrupt.S
new file mode 100644
index 0000000..69bba3f
--- /dev/null
+++ b/arch/blackfin/cpu/interrupt.S
@@ -0,0 +1,152 @@
+/*
+ * interrupt.S - trampoline default exceptions/interrupts to C handlers
+ *
+ * Copyright (c) 2005-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/entry.h>
+#include <asm/ptrace.h>
+#include <asm/deferred.h>
+#include <asm/mach-common/bits/core.h>
+
+.text
+
+/* default entry point for exceptions */
+ENTRY(_trap)
+ CONFIG_BFIN_SCRATCH_REG = sp;
+ sp.l = LO(L1_SRAM_SCRATCH_END - 20);
+ sp.h = HI(L1_SRAM_SCRATCH_END - 20);
+ SAVE_ALL_SYS
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = 3; /* EVT3 space */
+ sp += -12;
+ call _trap_c;
+ sp += 12;
+
+#ifdef CONFIG_EXCEPTION_DEFER
+ CC = R0 == 0;
+ IF CC JUMP .Lexit_trap;
+
+ /* To avoid double faults, lower our priority to IRQ5 */
+ p4.l = lo(COREMMR_BASE);
+ p4.h = hi(COREMMR_BASE);
+
+ r7.h = _exception_to_level5;
+ r7.l = _exception_to_level5;
+ [p4 + (EVT5 - COREMMR_BASE)] = r7;
+
+ /*
+ * Save these registers, as they are only valid in exception context
+ * (where we are now - as soon as we defer to IRQ5, they can change)
+ */
+ p5.l = _deferred_regs;
+ p5.h = _deferred_regs;
+ r6 = [p4 + (DCPLB_FAULT_ADDR - COREMMR_BASE)];
+ [p5 + (deferred_regs_DCPLB_FAULT_ADDR * 4)] = r6;
+
+ r6 = [p4 + (ICPLB_FAULT_ADDR - COREMMR_BASE)];
+ [p5 + (deferred_regs_ICPLB_FAULT_ADDR * 4)] = r6;
+
+ /* Save the state of single stepping */
+ r6 = SYSCFG;
+ [p5 + (deferred_regs_SYSCFG * 4)] = r6;
+ /* Clear it while we handle the exception in IRQ5 mode
+ * RESTORE_ALL_SYS will load it, so all we need to do is store it
+ * in the right place
+ */
+ BITCLR(r6, SYSCFG_SSSTEP_P);
+ [SP + PT_SYSCFG] = r6;
+
+ /* Since we are going to clobber RETX, we need to save it */
+ r6 = retx;
+ [p5 + (deferred_regs_retx * 4)] = r6;
+
+ /* Save the current IMASK, since we change in order to jump to level 5 */
+ cli r6;
+ [p5 + (deferred_regs_IMASK * 4)] = r6;
+
+ /* Disable all interrupts, but make sure level 5 is enabled so
+ * we can switch to that level.
+ */
+ r6 = 0x3f;
+ sti r6;
+
+ /* Clobber RETX so we don't end up back at a faulting instruction */
+ [sp + PT_RETX] = r7;
+
+ /* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
+ * clear it (re-enabling interrupts again) by the special sequence of pushing
+ * RETI onto the stack. This way we can lower ourselves to IVG5 even if the
+ * exception was taken after the interrupt handler was called but before it
+ * got a chance to enable global interrupts itself.
+ */
+ [--sp] = reti;
+ sp += 4;
+
+ RAISE 5;
+.Lexit_trap:
+#endif
+
+#if ANOMALY_05000257
+ R7 = LC0;
+ LC0 = R7;
+ R7 = LC1;
+ LC1 = R7;
+#endif
+
+ RESTORE_ALL_SYS
+ sp = CONFIG_BFIN_SCRATCH_REG;
+ rtx;
+ENDPROC(_trap)
+
+#ifdef CONFIG_EXCEPTION_DEFER
+/* Deferred (IRQ5) exceptions */
+ENTRY(_exception_to_level5)
+ SAVE_ALL_SYS
+
+ /* Now we have to fix things up */
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ r0.l = _evt_default;
+ r0.h = _evt_default;
+ [p4] = r0;
+ csync;
+
+ p4.l = _deferred_regs;
+ p4.h = _deferred_regs;
+ r0 = [p4 + (deferred_regs_retx * 4)];
+ [sp + PT_PC] = r0;
+
+ r0 = [p4 + (deferred_regs_SYSCFG * 4)];
+ [sp + PT_SYSCFG] = r0;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ r1 = 5; /* EVT5 space */
+ sp += -12;
+ call _trap_c;
+ sp += 12;
+
+ /* Restore IMASK */
+ r0 = [p4 + (deferred_regs_IMASK * 4)];
+ sti r0;
+
+ RESTORE_ALL_SYS
+
+ rti;
+ENDPROC(_exception_to_level5)
+#endif
+
+/* default entry point for interrupts */
+ENTRY(_evt_default)
+ SAVE_ALL_SYS
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ sp += -12;
+ call _bfin_panic;
+ sp += 12;
+ RESTORE_ALL_SYS
+ rti;
+ENDPROC(_evt_default)