summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc85xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx')
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile49
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c22
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen1.c89
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen2.c95
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c464
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/spl_minimal.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/t2080_ids.c142
-rw-r--r--arch/powerpc/cpu/mpc85xx/t2080_serdes.c208
10 files changed, 368 insertions, 707 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index a34014f..ef7637a 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -29,51 +29,6 @@ obj-$(CONFIG_MP) += release.o
obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o
obj-$(CONFIG_CPM2) += commproc.o
-# supports ddr1
-obj-$(CONFIG_MPC8540) += ddr-gen1.o
-obj-$(CONFIG_MPC8560) += ddr-gen1.o
-obj-$(CONFIG_MPC8541) += ddr-gen1.o
-obj-$(CONFIG_MPC8555) += ddr-gen1.o
-
-# supports ddr1/2
-obj-$(CONFIG_MPC8548) += ddr-gen2.o
-obj-$(CONFIG_MPC8568) += ddr-gen2.o
-obj-$(CONFIG_MPC8544) += ddr-gen2.o
-
-# supports ddr1/2/3
-obj-$(CONFIG_PPC_C29X) += ddr-gen3.o
-obj-$(CONFIG_MPC8572) += ddr-gen3.o
-obj-$(CONFIG_MPC8536) += ddr-gen3.o
-obj-$(CONFIG_MPC8569) += ddr-gen3.o
-obj-$(CONFIG_P1010) += ddr-gen3.o
-obj-$(CONFIG_P1011) += ddr-gen3.o
-obj-$(CONFIG_P1012) += ddr-gen3.o
-obj-$(CONFIG_P1013) += ddr-gen3.o
-obj-$(CONFIG_P1014) += ddr-gen3.o
-obj-$(CONFIG_P1020) += ddr-gen3.o
-obj-$(CONFIG_P1021) += ddr-gen3.o
-obj-$(CONFIG_P1022) += ddr-gen3.o
-obj-$(CONFIG_P1023) += ddr-gen3.o
-obj-$(CONFIG_P1024) += ddr-gen3.o
-obj-$(CONFIG_P1025) += ddr-gen3.o
-obj-$(CONFIG_P2010) += ddr-gen3.o
-obj-$(CONFIG_P2020) += ddr-gen3.o
-obj-$(CONFIG_PPC_P2041) += ddr-gen3.o
-obj-$(CONFIG_PPC_P3041) += ddr-gen3.o
-obj-$(CONFIG_PPC_P4080) += ddr-gen3.o
-obj-$(CONFIG_PPC_P5020) += ddr-gen3.o
-obj-$(CONFIG_PPC_P5040) += ddr-gen3.o
-obj-$(CONFIG_PPC_T4240) += ddr-gen3.o
-obj-$(CONFIG_PPC_T4160) += ddr-gen3.o
-obj-$(CONFIG_PPC_B4420) += ddr-gen3.o
-obj-$(CONFIG_PPC_B4860) += ddr-gen3.o
-obj-$(CONFIG_BSC9131) += ddr-gen3.o
-obj-$(CONFIG_BSC9132) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1040) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1042) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1020) += ddr-gen3.o
-obj-$(CONFIG_PPC_T1022) += ddr-gen3.o
-
obj-$(CONFIG_CPM2) += ether_fcc.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_FSL_CORENET) += liodn.o
@@ -95,6 +50,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_ids.o
obj-$(CONFIG_PPC_T1042) += t1040_ids.o
obj-$(CONFIG_PPC_T1020) += t1040_ids.o
obj-$(CONFIG_PPC_T1022) += t1040_ids.o
+obj-$(CONFIG_PPC_T2080) += t2080_ids.o
+obj-$(CONFIG_PPC_T2081) += t2080_ids.o
obj-$(CONFIG_QE) += qe_io.o
@@ -138,6 +95,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
obj-$(CONFIG_PPC_T1042) += t1040_serdes.o
obj-$(CONFIG_PPC_T1020) += t1040_serdes.o
obj-$(CONFIG_PPC_T1022) += t1040_serdes.o
+obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
+obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
obj-y += cpu.o
obj-y += cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 1a0196c..3e99b07 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -17,12 +17,12 @@
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/mmu.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
#include <asm/fsl_law.h>
#include <asm/fsl_lbc.h>
#include <post.h>
#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -416,7 +416,7 @@ static void dump_spd_ddr_reg(void)
int i, j, k, m;
u8 *p_8;
u32 *p_32;
- ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+ struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
generic_spd_eeprom_t
spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
@@ -453,21 +453,21 @@ static void dump_spd_ddr_reg(void)
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
switch (i) {
case 0:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
#endif
default:
@@ -482,7 +482,7 @@ static void dump_spd_ddr_reg(void)
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
puts("\n");
- for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) {
+ for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
m = 0;
printf("%6d (0x%04x)", k * 4, k * 4);
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
deleted file mode 100644
index 4dd8c0b..0000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
- if (ctrl_num != 0) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#endif
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- asm("sync;isync;msync");
- udelay(500);
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-
-void
-ddr_enable_ecc(unsigned int dram_size)
-{
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
-
- dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
- /*
- * Enable errors for ECC.
- */
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
- ddr->err_disable = 0x00000000;
- asm("sync;isync;msync");
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
-}
-
-#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
deleted file mode 100644
index 542bc84..0000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i;
- ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
-#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint svr;
-#endif
-
- if (ctrl_num) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
- /*
- * Set the DDR IO receiver to an acceptable bias point.
- * Fixed in Rev 2.1.
- */
- svr = get_svr();
- if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
- if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
- SDRAM_CFG_SDRAM_TYPE_DDR2)
- out_be32(&gur->ddrioovcr, 0x90000000);
- else
- out_be32(&gur->ddrioovcr, 0xA8000000);
- }
-#endif
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
deleted file mode 100644
index 1be51d3..0000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/processor.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-
-/*
- * regs has the to-be-set values for DDR controller registers
- * ctrl_num is the DDR controller number
- * step: 0 goes through the initialization in one pass
- * 1 sets registers and returns before enabling controller
- * 2 resumes from step 1 and continues to initialize
- * Dividing the initialization to two steps to deassert DDR reset signal
- * to comply with JEDEC specs for RDIMMs.
- */
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num, int step)
-{
- unsigned int i, bus_width;
- volatile ccsr_ddr_t *ddr;
- u32 temp_sdram_cfg;
- u32 total_gb_size_per_controller;
- int timeout;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- int timeout_save;
- volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
- int csn = -1;
-#endif
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
- break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
- case 1:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
- break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
- case 2:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
- break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
- case 3:
- ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
- break;
-#endif
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- if (step == 2)
- goto step2;
-
- if (regs->ddr_eor)
- out_be32(&ddr->eor, regs->ddr_eor);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- debug("Workaround for ERRATUM_DDR111_DDR134\n");
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
- cs_ea = regs->cs[i].bnds & 0xfff;
- if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
- csn = i;
- csn_bnds_backup = regs->cs[i].bnds;
- csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
- if (cs_ea > 0xeff)
- *csn_bnds_t = regs->cs[i].bnds + 0x01000000;
- else
- *csn_bnds_t = regs->cs[i].bnds + 0x01000100;
- debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
- "change it to 0x%x\n",
- csn, csn_bnds_backup, regs->cs[i].bnds);
- break;
- }
- }
-#endif
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
- out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
- out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
- out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
- out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
- out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
- out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
- out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
- out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
-#ifndef CONFIG_SYS_FSL_DDR_EMU
- /*
- * Skip these two registers if running on emulator
- * because emulator doesn't have skew between bytes.
- */
-
- if (regs->ddr_wrlvl_cntl_2)
- out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
- if (regs->ddr_wrlvl_cntl_3)
- out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
-#endif
-
- out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
- out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
- out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
- out_be32(&ddr->err_disable, regs->err_disable);
- out_be32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
- if (regs->debug[i]) {
- debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
- out_be32(&ddr->debug[i], regs->debug[i]);
- }
- }
-#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
- out_be32(&ddr->debug[28], 0x30003000);
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
- out_be32(&ddr->debug[12], 0x00000015);
- out_be32(&ddr->debug[21], 0x24000000);
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
-
- /*
- * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
- * deasserted. Clocks start when any chip select is enabled and clock
- * control register is set. Because all DDR components are connected to
- * one reset signal, this needs to be done in two steps. Step 1 is to
- * get the clocks started. Step 2 resumes after reset signal is
- * deasserted.
- */
- if (step == 1) {
- udelay(200);
- return;
- }
-
-step2:
- /* Set, but do not enable the memory */
- temp_sdram_cfg = regs->ddr_sdram_cfg;
- temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
- debug("Workaround for ERRATUM_DDR_A003\n");
- if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
- out_be32(&ddr->debug[2], 0x00000400);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
- out_be32(&ddr->mtcr, 0);
- out_be32(&ddr->debug[12], 0x00000015);
- out_be32(&ddr->debug[21], 0x24000000);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
-
- asm volatile("sync;isync");
- while (!(in_be32(&ddr->debug[1]) & 0x2))
- ;
-
- switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
- case 0x00000000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x02));
- break;
- case 0x00100000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x0a));
- break;
- case 0x00200000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x12));
- break;
- case 0x00300000:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x1a));
- break;
- default:
- out_be32(&ddr->sdram_md_cntl,
- MD_CNTL_MD_EN |
- MD_CNTL_CS_SEL_CS0_CS1 |
- 0x04000000 |
- MD_CNTL_WRCW |
- MD_CNTL_MD_VALUE(0x02));
- printf("Unsupported RC10\n");
- break;
- }
-
- while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
- ;
- udelay(6);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->debug[2], 0x0);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->debug[12], 0x0);
- out_be32(&ddr->debug[21], 0x0);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-
- }
-#endif
- /*
- * For 8572 DDR1 erratum - DDR controller may enter illegal state
- * when operatiing in 32-bit bus mode with 4-beat bursts,
- * This erratum does not affect DDR3 mode, only for DDR2 mode.
- */
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
- debug("Workaround for ERRATUM_DDR_115\n");
- if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
- && in_be32(&ddr->sdram_cfg) & 0x80000) {
- /* set DEBUG_1[31] */
- setbits_be32(&ddr->debug[0], 1);
- }
-#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- debug("Workaround for ERRATUM_DDR111_DDR134\n");
- /*
- * This is the combined workaround for DDR111 and DDR134
- * following the published errata for MPC8572
- */
-
- /* 1. Set EEBACR[3] */
- setbits_be32(&ecm->eebacr, 0x10000000);
- debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
- /* 2. Set DINIT in SDRAM_CFG_2*/
- setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
- debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
- in_be32(&ddr->sdram_cfg_2));
-
- /* 3. Set DEBUG_3[21] */
- setbits_be32(&ddr->debug[2], 0x400);
- debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
-#endif /* part 1 of the workaound */
-
- /*
- * 500 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- * DDR2 need 200 us, and DDR3 need 500 us from spec,
- * we choose the max, that is 500 us for all of case.
- */
- udelay(500);
- asm volatile("sync;isync");
-
- /* Let the controller go */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
- asm volatile("sync;isync");
-
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (!(regs->cs[i].config & 0x80000000))
- continue;
- total_gb_size_per_controller += 1 << (
- ((regs->cs[i].config >> 14) & 0x3) + 2 +
- ((regs->cs[i].config >> 8) & 0x7) + 12 +
- ((regs->cs[i].config >> 0) & 0x7) + 8 +
- 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
- 26); /* minus 26 (count of 64M) */
- }
- if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
- total_gb_size_per_controller *= 3;
- else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
- total_gb_size_per_controller <<= 1;
- /*
- * total memory / bus width = transactions needed
- * transactions needed / data rate = seconds
- * to add plenty of buffer, double the time
- * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
- * Let's wait for 800ms
- */
- bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
- >> SDRAM_CFG_DBW_SHIFT);
- timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 1;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- timeout_save = timeout;
-#endif
- total_gb_size_per_controller >>= 4; /* shift down to gb size */
- debug("total %d GB\n", total_gb_size_per_controller);
- debug("Need to wait up to %d * 10ms\n", timeout);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
- (timeout >= 0)) {
- udelay(10000); /* throttle polling rate */
- timeout--;
- }
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
- /* continue this workaround */
-
- /* 4. Clear DEBUG3[21] */
- clrbits_be32(&ddr->debug[2], 0x400);
- debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
- /* DDR134 workaround starts */
- /* A: Clear sdram_cfg_2[odt_cfg] */
- clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
- debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
- in_be32(&ddr->sdram_cfg_2));
-
- /* B: Set DEBUG1[15] */
- setbits_be32(&ddr->debug[0], 0x10000);
- debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
- /* C: Set timing_cfg_2[cpo] to 0b11111 */
- setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
- debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
- in_be32(&ddr->timing_cfg_2));
-
- /* D: Set D6 to 0x9f9f9f9f */
- out_be32(&ddr->debug[5], 0x9f9f9f9f);
- debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
-
- /* E: Set D7 to 0x9f9f9f9f */
- out_be32(&ddr->debug[6], 0x9f9f9f9f);
- debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
-
- /* F: Set D2[20] */
- setbits_be32(&ddr->debug[1], 0x800);
- debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
- /* G: Poll on D2[20] until cleared */
- while (in_be32(&ddr->debug[1]) & 0x800)
- udelay(10000); /* throttle polling rate */
-
- /* H: Clear D1[15] */
- clrbits_be32(&ddr->debug[0], 0x10000);
- debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
- /* I: Set sdram_cfg_2[odt_cfg] */
- setbits_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
- debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
- /* Continuing with the DDR111 workaround */
- /* 5. Set D2[21] */
- setbits_be32(&ddr->debug[1], 0x400);
- debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
- /* 6. Poll D2[21] until its cleared */
- while (in_be32(&ddr->debug[1]) & 0x400)
- udelay(10000); /* throttle polling rate */
-
- /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
- debug("Wait for %d * 10ms\n", timeout_save);
- udelay(timeout_save * 10000);
-
- /* 8. Set sdram_cfg_2[dinit] if options requires */
- setbits_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
- debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
- /* 9. Poll until dinit is cleared */
- timeout = timeout_save;
- debug("Need to wait up to %d * 10ms\n", timeout);
- while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
- (timeout >= 0)) {
- udelay(10000); /* throttle polling rate */
- timeout--;
- }
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
- /* 10. Clear EEBACR[3] */
- clrbits_be32(&ecm->eebacr, 10000000);
- debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
- if (csn != -1) {
- csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
- *csn_bnds_t = csn_bnds_backup;
- debug("Change cs%d_bnds back to 0x%08x\n",
- csn, regs->cs[csn].bnds);
- setbits_be32(&ddr->sdram_cfg, 0x2); /* MEM_HALT */
- switch (csn) {
- case 0:
- out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
- break;
- case 1:
- out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
- break;
- case 2:
- out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
- break;
- case 3:
- out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
- break;
- }
- clrbits_be32(&ddr->sdram_cfg, 0x2);
- }
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
-}
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 5f198eb..88c8e65 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -11,7 +11,7 @@
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index d08a8d2..1a58a19 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -122,7 +122,7 @@ void get_sys_info(sys_info_t *sys_info)
sys_info->freq_processor[cpu] =
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
-#ifdef CONFIG_PPC_B4860
+#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080)
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
#else
diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index 199b33e..9e4c6c9 100644
--- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -7,7 +7,7 @@
#include <common.h>
#include <asm/processor.h>
#include <asm/global_data.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
new file mode 100644
index 0000000..068e1f2
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+};
+#endif
+
+#ifdef CONFIG_SYS_SRIO
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_BASE(1, 307),
+ SET_SRIO_LIODN_BASE(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_PME_LIODN(117),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+ SET_SATA_LIODN(1, 555),
+ SET_SATA_LIODN(2, 556),
+
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+ SET_DMA_LIODN(3, 226),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+ SET_PMAN_LIODN(1, 513),
+ SET_PMAN_LIODN(2, 514),
+ SET_PMAN_LIODN(3, 515),
+#endif
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 6),
+ SET_RMAN_LIODN(1, 7),
+ SET_RMAN_LIODN(2, 8),
+ SET_RMAN_LIODN(3, 9),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+ [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694),
+#endif
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
new file mode 100644
index 0000000..f2fbdeb
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static const struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x6E, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xBC, {PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0xC8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, PCIE4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xD6, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, PCIE4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xDE, {PCIE3, PCIE3, PCIE3, PCIE3,
+ PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+ {0xE0, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4,
+ PCIE1, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xF2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+ {0xF8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+ {0xFA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, PCIE1,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+#if defined(CONFIG_PPC_T2080)
+ {0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x95, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xA2, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x94, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM1_MAC1, XFI_FM1_MAC2,
+ PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x6D, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0x71, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+ SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xA6, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+ PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x8E, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+ PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x8F, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+ PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x82, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x83, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xA4, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0x96, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0x8A, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0x67, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM1_MAC1, XFI_FM1_MAC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0xAB, {PCIE3, PCIE3, PCIE3, PCIE3,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0xDA, {PCIE3, PCIE3, PCIE3, PCIE3,
+ PCIE3, PCIE3, PCIE3, PCIE3} },
+ {0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xCB, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0xD8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM1_MAC1, XFI_FM1_MAC2,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+
+#elif defined(CONFIG_PPC_T2081)
+ {0xAA, {PCIE3, PCIE3, PCIE3, PCIE3,
+ PCIE4, PCIE4, PCIE4, PCIE4} },
+ {0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+#endif
+ {}
+};
+
+#ifndef CONFIG_PPC_T2081
+static const struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
+ {0x16, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
+ {0x01, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+ {0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+ {0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+ {0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
+ {0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} },
+ {0x02, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+ {0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} },
+ {}
+};
+#endif
+
+static const struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+#ifndef CONFIG_PPC_T2081
+ serdes2_cfg_tbl,
+#endif
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ const struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ const struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}