1 files changed, 0 insertions, 131 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c
deleted file mode 100644
index 4e9a40d..0000000
--- a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2009
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <asm/ppc4xx_config.h>
-#include <asm/io.h>
-
-static void print_configs(int cur_config_nr)
-{
-	int i;
-
-	for (i = 0; i < ppc4xx_config_count; i++) {
-		printf("%-16s - %s", ppc4xx_config_val[i].label,
-		       ppc4xx_config_val[i].description);
-		if (i == cur_config_nr)
-			printf(" ***");
-		printf("\n");
-	}
-
-}
-
-static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int i;
-	int ret;
-	int cur_config_nr = -1;
-	u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
-
-	/*
-	 * First switch to correct I2C bus. This is I2C bus 0
-	 * for all currently available 4xx derivats.
-	 */
-	i2c_set_bus_num(0);
-
-#ifdef CONFIG_CMD_EEPROM
-	ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
-			  CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
-			  cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
-	ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
-		       CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
-		       1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
-	if (ret) {
-		printf("Error reading EEPROM at addr 0x%x\n",
-		       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
-		return -1;
-	}
-
-	/*
-	 * Search the current configuration
-	 */
-	for (i = 0; i < ppc4xx_config_count; i++) {
-		if (memcmp(cur_config, ppc4xx_config_val[i].val,
-			   CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
-			cur_config_nr = i;
-	}
-
-	if (cur_config_nr == -1) {
-		printf("Warning: The I2C bootstrap values don't match any"
-		       " of the available options!\n");
-		printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
-			CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
-		for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
-			printf("%02x ", cur_config[i]);
-		}
-		printf("\n");
-	}
-
-	if (argc < 2) {
-		printf("Available configurations (I2C address 0x%02x):\n",
-		       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
-		print_configs(cur_config_nr);
-		return 0;
-	}
-
-	for (i = 0; i < ppc4xx_config_count; i++) {
-		/*
-		 * Search for configuration name/label
-		 */
-		if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
-			printf("Using configuration:\n%-16s - %s\n",
-			       ppc4xx_config_val[i].label,
-			       ppc4xx_config_val[i].description);
-
-#ifdef CONFIG_CMD_EEPROM
-			ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
-					   CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
-					   ppc4xx_config_val[i].val,
-					   CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
-			ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
-					CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
-					1, ppc4xx_config_val[i].val,
-					CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
-			udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-			if (ret) {
-				printf("Error updating EEPROM at addr 0x%x\n",
-				       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
-				return -1;
-			}
-
-			printf("done (dump via 'i2c md %x 0.1 %x')\n",
-			       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
-			       CONFIG_4xx_CONFIG_BLOCKSIZE);
-			printf("Reset the board for the changes to"
-			       " take effect\n");
-			return 0;
-		}
-	}
-
-	printf("Configuration %s not found!\n", argv[1]);
-	print_configs(cur_config_nr);
-	return -1;
-}
-
-U_BOOT_CMD(
-	chip_config,	2,	0,	do_chip_config,
-	"program the I2C bootstrap EEPROM",
-	"[config-label]"
-);