summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/ppc4xx/speed.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/ppc4xx/speed.c')
-rw-r--r--arch/powerpc/cpu/ppc4xx/speed.c1134
1 files changed, 0 insertions, 1134 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c
deleted file mode 100644
index 49a8295..0000000
--- a/arch/powerpc/cpu/ppc4xx/speed.c
+++ /dev/null
@@ -1,1134 +0,0 @@
-/*
- * (C) Copyright 2000-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ONE_BILLION 1000000000
-#ifdef DEBUG
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-#if defined(CONFIG_405GP)
-
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- uint pvr = get_pvr();
- unsigned long psr;
- unsigned long m;
-
- /*
- * Read PLL Mode register
- */
- pllmr = mfdcr (CPC0_PLLMR);
-
- /*
- * Read Pin Strapping register
- */
- psr = mfdcr (CPC0_PSR);
-
- /*
- * Determine FWD_DIV.
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
- if (sysInfo->pllFbkDiv == 0) {
- sysInfo->pllFbkDiv = 16;
- }
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
-
- /*
- * Check if PPC405GPr used (mask minor revision field)
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- /*
- * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
- */
- sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
-
- /*
- * Determine factor m depending on PLL feedback clock source
- */
- if (!(psr & PSR_PCI_ASYNC_EN)) {
- if (psr & PSR_NEW_MODE_EN) {
- /*
- * sync pci clock used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
- } else {
- /*
- * sync pci clock used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
- }
- } else if (psr & PSR_NEW_MODE_EN) {
- if (psr & PSR_PERCLK_SYNC_MODE_EN) {
- /*
- * PerClk used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
- } else {
- /*
- * CPU clock used as feedback (new mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
- }
- } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
- /*
- * PerClk used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
- } else {
- /*
- * PLB clock used as feedback (legacy mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
- }
-
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
- sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
- } else {
- /*
- * Check pllFwdDiv to see if running in bypass mode where the CPU speed
- * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
- * to make sure it is within the proper range.
- * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
- * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
- */
- if (sysInfo->pllFwdDiv == 1) {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
- sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
- } else {
- sysInfo->freqVCOHz = ( 1000000000000LL *
- (unsigned long long)sysInfo->pllFwdDiv *
- (unsigned long long)sysInfo->pllFbkDiv *
- (unsigned long long)sysInfo->pllPlbDiv
- ) / (unsigned long long)sysClkPeriodPs;
- sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
- sysInfo->pllFbkDiv)) * 10000;
- sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
- }
- }
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqProcessor;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-
-#elif defined(CONFIG_440)
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-static u8 pll_fwdv_multi_bits[] = {
- /* values for: 1 - 16 */
- 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
- 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
-};
-
-u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
- if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-static u8 pll_fbdv_multi_bits[] = {
- /* values for: 1 - 100 */
- 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
- 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
- 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
- 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
- 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
- 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
- 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
- 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
- /* values for: 101 - 200 */
- 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
- 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
- 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
- 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
- 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
- 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
- 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
- 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
- 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
- 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
- /* values for: 201 - 255 */
- 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
- 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
- 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
- 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
- 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
- 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
-};
-
-u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
- if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-/*
- * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
- * with latest EAS
- */
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long m;
- unsigned long plbedv0;
-
- /* Extract configured divisors */
- mfsdr(SDR0_SDSTP0, strp0);
- mfsdr(SDR0_SDSTP1, strp1);
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
- sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
- sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
- sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
-
- temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
- temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
-
- temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
- plbedv0 = temp ? temp: 8;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) {
- /* PLL internal feedback */
- m = sysInfo->pllFbkDiv;
- } else {
- /* PLL PerClk feedback */
- m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
- sysInfo->pllExtBusDiv;
- }
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- return;
-}
-
-#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-void get_sys_info (sys_info_t *sysInfo)
-{
- unsigned long temp;
- unsigned long reg;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
- /*
- WARNING: ASSUMES the following:
- ENG=1
- PRADV0=1
- PRBDV0=1
- */
-
- /* Decode CPR0_PLLD0 for divisors */
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- sysInfo->pllFwdDivA = temp ? temp : 16;
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- lfdiv = reg & PLLD_LFBDV_MASK;
-
- mfcpr(CPR0_OPBD0, reg);
- temp = (reg & OPBDDV_MASK) >> 24;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- mfcpr(CPR0_PERD, reg);
- temp = (reg & PERDV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 8;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & SPCID_MASK) >> 24;
- sysInfo->pllPciDiv = temp ? temp : 4;
-
- /* Calculate 'M' based on feedback source */
- mfsdr(SDR0_SDSTP0, reg);
- temp = (reg & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- mfcpr(CPR0_PLLC, reg);
- temp = (reg & PLLC_SRC_MASK) >> 29;
- if (!temp) /* PLLOUTA */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else /* PLLOUTB */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
- sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- /* Figure which timer source to use */
- if (mfspr(SPRN_CCR1) & 0x0080) {
- /* External Clock, assume same as SYS_CLK */
- temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
- if (CONFIG_SYS_CLK_FREQ > temp)
- sysInfo->freqTmrClk = temp;
- else
- sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
- }
- else /* Internal clock */
- sysInfo->freqTmrClk = sysInfo->freqProcessor;
-}
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- sys_info_t sys_info;
- get_sys_info (&sys_info);
- return sys_info.freqPCI;
-}
-
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
- && !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long temp;
- unsigned long m;
-
- /* Extract configured divisors */
- strp0 = mfdcr( CPC0_STRP0 );
- sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
- sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
- sysInfo->pllFbkDiv = temp ? temp : 16;
- sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
- sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
-
- /* Calculate 'M' based on feedback source */
- if( strp0 & PLLSYS0_EXTSL_MASK )
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-#else
-
-#if !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long temp1;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
-
-#if defined(CONFIG_YUCCA)
- unsigned long sys_freq;
- unsigned long sys_per=0;
- unsigned long msr;
- unsigned long pci_clock_per;
- unsigned long sdr_ddrpll;
-
- /*-------------------------------------------------------------------------+
- | Get the system clock period.
- +-------------------------------------------------------------------------*/
- sys_per = determine_sysper();
-
- msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
-
- /*-------------------------------------------------------------------------+
- | Calculate the system clock speed from the period.
- +-------------------------------------------------------------------------*/
- sys_freq = (ONE_BILLION / sys_per) * 1000;
-#endif
-
- /* Extract configured divisors */
- mfsdr( SDR0_SDSTP0,strp0 );
- mfsdr( SDR0_SDSTP1,strp1 );
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
- sysInfo->pllFwdDivA = temp ? temp : 16 ;
- temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
- sysInfo->pllOpbDiv = temp ? temp : 4;
- temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
- prbdv0 = (strp0 >> 2) & 0x7;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
- lfdiv = temp1 ? temp1 : 64;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
- if (!temp)
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
-#if defined(CONFIG_YUCCA)
- sysInfo->freqVCOMhz = (m * sys_freq) ;
-#else
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
-#endif
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
-#if defined(CONFIG_YUCCA)
- /* Determine PCI Clock Period */
- pci_clock_per = determine_pci_clock_per();
- sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-#endif
-
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-#endif /* CONFIG_XILINX_440 */
-
-#if defined(CONFIG_YUCCA)
-unsigned long determine_sysper(void)
-{
- unsigned int fpga_clocking_reg;
- unsigned int master_clock_selection;
- unsigned long master_clock_per = 0;
- unsigned long fb_div_selection;
- unsigned int vco_div_reg_value;
- unsigned long vco_div_selection;
- unsigned long sys_per = 0;
- int extClkVal;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 0 and reg 1 to get FPGA reg information
- +-------------------------------------------------------------------------*/
- fpga_clocking_reg = in16(FPGA_REG16);
-
-
- /* Determine Master Clock Source Selection */
- master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
-
- switch(master_clock_selection) {
- case FPGA_REG16_MASTER_CLK_66_66:
- master_clock_per = PERIOD_66_66MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_50:
- master_clock_per = PERIOD_50_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_33_33:
- master_clock_per = PERIOD_33_33MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_25:
- master_clock_per = PERIOD_25_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_EXT:
- if ((extClkVal==EXTCLK_33_33)
- && (extClkVal==EXTCLK_50)
- && (extClkVal==EXTCLK_66_66)
- && (extClkVal==EXTCLK_83)) {
- /* calculate master clock period from external clock value */
- master_clock_per=(ONE_BILLION/extClkVal) * 1000;
- } else {
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- break;
- default:
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- break;
- }
-
- /* Determine FB divisors values */
- if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_6;
- else
- fb_div_selection = FPGA_FB_DIV_12;
- } else {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_10;
- else
- fb_div_selection = FPGA_FB_DIV_20;
- }
-
- /* Determine VCO divisors values */
- vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
-
- switch(vco_div_reg_value) {
- case FPGA_REG16_VCO_DIV_4:
- vco_div_selection = FPGA_VCO_DIV_4;
- break;
- case FPGA_REG16_VCO_DIV_6:
- vco_div_selection = FPGA_VCO_DIV_6;
- break;
- case FPGA_REG16_VCO_DIV_8:
- vco_div_selection = FPGA_VCO_DIV_8;
- break;
- case FPGA_REG16_VCO_DIV_10:
- default:
- vco_div_selection = FPGA_VCO_DIV_10;
- break;
- }
-
- if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
- switch(master_clock_per) {
- case PERIOD_25_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_33_33MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_50_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_50_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_75_00MHZ;
- }
- break;
- case PERIOD_66_66MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_66_66MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_100_00MHZ;
- }
- break;
- default:
- break;
- }
-
- if (sys_per == 0) {
- /* Other combinations are not supported */
- DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- } else {
- /* calcul system clock without cheking */
- /* if engineering option clock no check is selected */
- /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
- sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
- }
-
- return(sys_per);
-}
-
-/*-------------------------------------------------------------------------+
-| determine_pci_clock_per.
-+-------------------------------------------------------------------------*/
-unsigned long determine_pci_clock_per(void)
-{
- unsigned long pci_clock_selection, pci_period;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 6 to get PCI 0 FPGA reg information
- +-------------------------------------------------------------------------*/
- pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
-
-
- pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
-
- switch (pci_clock_selection) {
- case FPGA_REG16_PCI0_CLK_133_33:
- pci_period = PERIOD_133_33MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_100:
- pci_period = PERIOD_100_00MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_66_66:
- pci_period = PERIOD_66_66MHZ;
- break;
- default:
- pci_period = PERIOD_33_33MHZ;
- break;
- }
-
- return(pci_period);
-}
-#endif
-
-#elif defined(CONFIG_XILINX_405)
-extern void get_sys_info (sys_info_t * sysInfo);
-extern ulong get_PCI_freq (void);
-
-#elif defined(CONFIG_405)
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqVCOMhz=3125000;
- sysInfo->freqProcessor=12*1000*1000;
- sysInfo->freqPLB=50*1000*1000;
- sysInfo->freqPCI=66*1000*1000;
-}
-
-#elif defined(CONFIG_405EP)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr0;
- unsigned long pllmr1;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m;
- unsigned long pllmr0_ccdv;
-
- /*
- * Read PLL Mode registers
- */
- pllmr0 = mfdcr (CPC0_PLLMR0);
- pllmr1 = mfdcr (CPC0_PLLMR1);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B (should be equal to A)
- */
- sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 16;
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
-
- /*
- * Determine the M factor
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
- if (pllmr1 & PLLMR1_SSCS_MASK) {
- /*
- * This is true if FWDVA == FWDVB:
- * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
- * / pllmr0_ccdv;
- */
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
- / sysInfo->pllFwdDiv / pllmr0_ccdv;
- } else {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
- }
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-
- sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-#elif defined(CONFIG_405EZ)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long cpr_plld;
- unsigned long cpr_pllc;
- unsigned long cpr_primad;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
- unsigned long primad_cpudv;
- unsigned long m;
- unsigned long plloutb;
-
- /*
- * Read PLL Mode registers
- */
- mfcpr(CPR0_PLLD, cpr_plld);
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B
- */
- sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
- if (sysInfo->pllFwdDivB == 0)
- sysInfo->pllFwdDivB = 8;
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 256;
-
- /*
- * Read CPR_PRIMAD register
- */
- mfcpr(CPR0_PRIMAD, cpr_primad);
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
- if (sysInfo->pllPlbDiv == 0)
- sysInfo->pllPlbDiv = 16;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
- if (sysInfo->pllExtBusDiv == 0)
- sysInfo->pllExtBusDiv = 16;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
- if (sysInfo->pllOpbDiv == 0)
- sysInfo->pllOpbDiv = 16;
-
- /*
- * Determine the M factor
- */
- if (cpr_pllc & PLLC_SRC_MASK)
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
- if (primad_cpudv == 0)
- primad_cpudv = 16;
-
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / primad_cpudv;
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
-
- sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllOpbDiv;
-
- sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllExtBusDiv;
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
- sysInfo->pllFwdDivB);
- sysInfo->freqUART = plloutb;
-}
-
-#elif defined(CONFIG_405EX)
-
-/*
- * TODO: We need to get the CPR registers and calculate these values correctly!!!!
- * We need the specs!!!!
- */
-static unsigned char get_fbdv(unsigned char index)
-{
- unsigned char ret = 0;
- /* This is table should be 256 bytes.
- * Only take first 52 values.
- */
- unsigned char fbdv_tb[] = {
- 0x00, 0xff, 0x7f, 0xfd,
- 0x7a, 0xf5, 0x6a, 0xd5,
- 0x2a, 0xd4, 0x29, 0xd3,
- 0x26, 0xcc, 0x19, 0xb3,
- 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba,
- 0x74, 0xe9, 0x52, 0xa5,
- 0x4b, 0x96, 0x2c, 0xd8,
- 0x31, 0xe3, 0x46, 0x8d,
- 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed,
- 0x5a, 0xb5, 0x6b, 0xd6,
- 0x2d, 0xdb, 0x36, 0xec,
-
- };
-
- if ((index & 0x7f) == 0)
- return 1;
- while (ret < sizeof (fbdv_tb)) {
- if (fbdv_tb[ret] == index)
- break;
- ret++;
- }
- ret++;
-
- return ret;
-}
-
-#define PLL_FBK_PLL_LOCAL 0
-#define PLL_FBK_CPU 1
-#define PLL_FBK_PERCLK 5
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m = 1;
- unsigned int tmp;
- unsigned char fwdva[16] = {
- 1, 2, 14, 9, 4, 11, 16, 13,
- 12, 5, 6, 15, 10, 7, 8, 3,
- };
- unsigned char sel, cpudv0, plb2xDiv;
-
- mfcpr(CPR0_PLLD, tmp);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
-
- /*
- * Determine PLBDV0
- */
- sysInfo->pllPlbDiv = 2;
-
- /*
- * Determine PERDV0
- */
- mfcpr(CPR0_PERD, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
-
- /*
- * Determine OPBDV0
- */
- mfcpr(CPR0_OPBD0, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
-
- /* Determine PLB2XDV0 */
- mfcpr(CPR0_PLBD, tmp);
- tmp = (tmp >> 16) & 0x07;
- plb2xDiv = (tmp == 0) ? 8 : tmp;
-
- /* Determine CPUDV0 */
- mfcpr(CPR0_CPUD, tmp);
- tmp = (tmp >> 24) & 0x07;
- cpudv0 = (tmp == 0) ? 8 : tmp;
-
- /* Determine SEL(5:7) in CPR0_PLLC */
- mfcpr(CPR0_PLLC, tmp);
- sel = (tmp >> 24) & 0x07;
-
- /*
- * Determine the M factor
- * PLL local: M = FBDV
- * CPU clock: M = FBDV * FWDVA * CPUDV0
- * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
- *
- */
- switch (sel) {
- case PLL_FBK_CPU:
- m = sysInfo->pllFwdDiv * cpudv0;
- break;
- case PLL_FBK_PERCLK:
- m = sysInfo->pllFwdDiv * plb2xDiv * 2
- * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
- break;
- case PLL_FBK_PLL_LOCAL:
- break;
- default:
- printf("%s unknown m\n", __FUNCTION__);
- return;
-
- }
- m *= sysInfo->pllFbkDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
-
- /*
- * Determine PLB clock frequency, ddr1x should be the same
- */
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-
-int get_clocks (void)
-{
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor;
- gd->bus_clk = sys_info.freqPLB;
-
- return (0);
-}
-
-
-/********************************************
- * get_bus_freq
- * return PLB bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- ulong val;
-
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB;
-#else
-# error get_bus_freq() not implemented
-#endif
-
- return val;
-}
-
-ulong get_OPB_freq (void)
-{
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
-
- return sys_info.freqOPB;
-}