summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c2
-rw-r--r--arch/powerpc/cpu/ppc4xx/4xx_pci.c36
-rw-r--r--arch/powerpc/cpu/ppc4xx/cpu.c12
-rw-r--r--arch/powerpc/cpu/ppc4xx/cpu_init.c8
-rw-r--r--arch/powerpc/cpu/ppc4xx/reginfo.c6
-rw-r--r--arch/powerpc/include/asm/ppc405.h33
-rw-r--r--arch/powerpc/include/asm/ppc405cr.h26
-rw-r--r--arch/powerpc/include/asm/ppc405ep.h26
-rw-r--r--arch/powerpc/include/asm/ppc405ex.h30
-rw-r--r--arch/powerpc/include/asm/ppc405ez.h28
-rw-r--r--arch/powerpc/include/asm/ppc405gp.h26
-rw-r--r--arch/powerpc/include/asm/ppc440.h1896
-rw-r--r--arch/powerpc/include/asm/ppc440ep_gr.h236
-rw-r--r--arch/powerpc/include/asm/ppc440epx_grx.h460
-rw-r--r--arch/powerpc/include/asm/ppc440gp.h65
-rw-r--r--arch/powerpc/include/asm/ppc440gx.h94
-rw-r--r--arch/powerpc/include/asm/ppc440sp.h92
-rw-r--r--arch/powerpc/include/asm/ppc440spe.h109
-rw-r--r--arch/powerpc/include/asm/ppc460ex_gt.h216
-rw-r--r--arch/powerpc/include/asm/ppc460sx.h40
-rw-r--r--arch/powerpc/include/asm/ppc4xx-emac.h6
-rw-r--r--arch/powerpc/include/asm/ppc4xx-mal.h39
-rw-r--r--arch/powerpc/include/asm/ppc4xx-sdram.h2
-rw-r--r--arch/powerpc/include/asm/ppc4xx.h168
24 files changed, 1722 insertions, 1934 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index 3923fee..cf9d66d 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -469,7 +469,7 @@ phys_size_t initdram(int board_type)
/*------------------------------------------------------------------
* Reset the DDR-SDRAM controller.
*-----------------------------------------------------------------*/
- mtsdr(SDR0_SRST, (0x80000000 >> 10));
+ mtsdr(SDR0_SRST, SDR0_SRST0_DMC);
mtsdr(SDR0_SRST, 0x00000000);
/*
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c
index bfba952..80b0c1c 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c
@@ -594,35 +594,35 @@ int __pci_pre_init(struct pci_controller *hose)
* Set priority for all PLB3 devices to 0.
* Set PLB3 arbiter to fair mode.
*/
- mfsdr(SD0_AMP1, reg);
- mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB3_ACR);
- mtdcr(PLB3_ACR, reg | 0x80000000);
+ mfsdr(SDR0_AMP1, reg);
+ mtsdr(SDR0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
+ reg = mfdcr(PLB3A0_ACR);
+ mtdcr(PLB3A0_ACR, reg | 0x80000000);
/*
* Set priority for all PLB4 devices to 0.
*/
- mfsdr(SD0_AMP0, reg);
- mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB4_ACR) | 0xa0000000;
- mtdcr(PLB4_ACR, reg);
+ mfsdr(SDR0_AMP0, reg);
+ mtsdr(SDR0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
+ reg = mfdcr(PLB4A0_ACR) | 0xa0000000;
+ mtdcr(PLB4A0_ACR, reg);
/*
* Set Nebula PLB4 arbiter to fair mode.
*/
/* Segment0 */
- reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
- reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
- reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
- reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
- mtdcr(PLB0_ACR, reg);
+ reg = (mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_PPM_MASK) | PLB4Ax_ACR_PPM_FAIR;
+ reg = (reg & ~PLB4Ax_ACR_HBU_MASK) | PLB4Ax_ACR_HBU_ENABLED;
+ reg = (reg & ~PLB4Ax_ACR_RDP_MASK) | PLB4Ax_ACR_RDP_4DEEP;
+ reg = (reg & ~PLB4Ax_ACR_WRP_MASK) | PLB4Ax_ACR_WRP_2DEEP;
+ mtdcr(PLB4A0_ACR, reg);
/* Segment1 */
- reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
- reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
- reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
- reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
- mtdcr(PLB1_ACR, reg);
+ reg = (mfdcr(PLB4A1_ACR) & ~PLB4Ax_ACR_PPM_MASK) | PLB4Ax_ACR_PPM_FAIR;
+ reg = (reg & ~PLB4Ax_ACR_HBU_MASK) | PLB4Ax_ACR_HBU_ENABLED;
+ reg = (reg & ~PLB4Ax_ACR_RDP_MASK) | PLB4Ax_ACR_RDP_4DEEP;
+ reg = (reg & ~PLB4Ax_ACR_WRP_MASK) | PLB4Ax_ACR_WRP_2DEEP;
+ mtdcr(PLB4A1_ACR, reg);
#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
hose->fixup_irq = board_pci_fixup_irq;
diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c
index 39b8e2f..8485218 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu.c
@@ -98,8 +98,8 @@ int pci_arbiter_enabled(void)
#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long val;
- mfsdr(SDR0_XCR, val);
- return (val & 0x80000000);
+ mfsdr(SDR0_XCR0, val);
+ return (val & SDR0_XCR0_PAE_MASK);
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
@@ -107,7 +107,7 @@ int pci_arbiter_enabled(void)
unsigned long val;
mfsdr(SDR0_PCI0, val);
- return (val & 0x80000000);
+ return (val & SDR0_PCI0_PAE_MASK);
#endif
}
#endif
@@ -262,7 +262,7 @@ static int bootstrap_option(void)
#endif /* SDR0_PINSTP_SHIFT */
-#if defined(CONFIG_440)
+#if defined(CONFIG_440GP)
static int do_chip_reset (unsigned long sys0, unsigned long sys1)
{
/* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
@@ -276,7 +276,7 @@ static int do_chip_reset (unsigned long sys0, unsigned long sys1)
return 1;
}
-#endif
+#endif /* CONFIG_440GP */
int checkcpu (void)
@@ -417,6 +417,7 @@ int checkcpu (void)
break;
#if defined(CONFIG_440)
+#if defined(CONFIG_440GP)
case PVR_440GP_RB:
puts("GP Rev. B");
/* See errata 1.12: CHIP_4 */
@@ -433,6 +434,7 @@ int checkcpu (void)
case PVR_440GP_RC:
puts("GP Rev. C");
break;
+#endif /* CONFIG_440GP */
case PVR_440GX_RA:
puts("GX Rev. A");
diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c
index 6456dc7..677a4b5 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu_init.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c
@@ -397,10 +397,10 @@ cpu_init_f (void)
/*
* Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
*/
- mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
- PLB0_ACR_RDP_4DEEP);
- mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
- PLB1_ACR_RDP_4DEEP);
+ mtdcr(PLB4A0_ACR, (mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_RDP_MASK) |
+ PLB4Ax_ACR_RDP_4DEEP);
+ mtdcr(PLB4A1_ACR, (mfdcr(PLB4A1_ACR) & ~PLB4Ax_ACR_RDP_MASK) |
+ PLB4Ax_ACR_RDP_4DEEP);
#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
}
diff --git a/arch/powerpc/cpu/ppc4xx/reginfo.c b/arch/powerpc/cpu/ppc4xx/reginfo.c
index 88f8429..2f1ab9e 100644
--- a/arch/powerpc/cpu/ppc4xx/reginfo.c
+++ b/arch/powerpc/cpu/ppc4xx/reginfo.c
@@ -108,9 +108,9 @@ const struct cpu_register ppc4xx_reg[] = {
{"SDR0_SDSTP3", IDCR6, SDR0_SDSTP3},
{"SDR0_CUST0", IDCR6, SDR0_CUST0},
{"SDR0_CUST1", IDCR6, SDR0_CUST1},
- {"SDR0_EBC0", IDCR6, SDR0_EBC0},
- {"SDR0_AMP0", IDCR6, SD0_AMP0},
- {"SDR0_AMP1", IDCR6, SD0_AMP1},
+ {"SDR0_EBC", IDCR6, SDR0_EBC},
+ {"SDR0_AMP0", IDCR6, SDR0_AMP0},
+ {"SDR0_AMP1", IDCR6, SDR0_AMP1},
{"SDR0_CP440", IDCR6, SDR0_CP440},
{"SDR0_CRYP0", IDCR6, SDR0_CRYP0},
{"SDR0_DDRCFG", IDCR6, SDR0_DDRCFG},
diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h
index bc2d051..e0d165e 100644
--- a/arch/powerpc/include/asm/ppc405.h
+++ b/arch/powerpc/include/asm/ppc405.h
@@ -34,6 +34,9 @@
#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480(403)*/
#endif
+/* DCR registers */
+#define PLB0_ACR 0x0087
+
/******************************************************************************
* Special for PPC405GP
******************************************************************************/
@@ -527,14 +530,10 @@
#endif /* #ifndef CONFIG_IOP480 */
#endif /* #ifdef CONFIG_405EP */
+#if 0
/******************************************************************************
* Memory Access Layer
******************************************************************************/
-#if defined(CONFIG_405EZ)
-#define MAL_DCR_BASE 0x380
-#else
-#define MAL_DCR_BASE 0x180
-#endif
#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Err Status (Read/Clear) */
#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
@@ -564,6 +563,7 @@
#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
+#endif
/*-----------------------------------------------------------------------------
| UART Register Offsets
@@ -806,27 +806,4 @@
#define SDR0_PFC1_GPT_FREQ 0x0000000f
#endif
-/* General Purpose Timer (GPT) Register Offsets */
-#define GPT0_TBC 0x00000000
-#define GPT0_IM 0x00000018
-#define GPT0_ISS 0x0000001C
-#define GPT0_ISC 0x00000020
-#define GPT0_IE 0x00000024
-#define GPT0_COMP0 0x00000080
-#define GPT0_COMP1 0x00000084
-#define GPT0_COMP2 0x00000088
-#define GPT0_COMP3 0x0000008C
-#define GPT0_COMP4 0x00000090
-#define GPT0_COMP5 0x00000094
-#define GPT0_COMP6 0x00000098
-#define GPT0_MASK0 0x000000C0
-#define GPT0_MASK1 0x000000C4
-#define GPT0_MASK2 0x000000C8
-#define GPT0_MASK3 0x000000CC
-#define GPT0_MASK4 0x000000D0
-#define GPT0_MASK5 0x000000D4
-#define GPT0_MASK6 0x000000D8
-#define GPT0_DCT0 0x00000110
-#define GPT0_DCIS 0x0000011C
-
#endif /* __PPC405_H__ */
diff --git a/arch/powerpc/include/asm/ppc405cr.h b/arch/powerpc/include/asm/ppc405cr.h
new file mode 100644
index 0000000..53a6ce8
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc405cr.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC405CR_H_
+#define _PPC405CR_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
+
+#endif /* _PPC405CR_H_ */
diff --git a/arch/powerpc/include/asm/ppc405ep.h b/arch/powerpc/include/asm/ppc405ep.h
new file mode 100644
index 0000000..38b1205
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc405ep.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC405EP_H_
+#define _PPC405EP_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
+
+#endif /* _PPC405EP_H_ */
diff --git a/arch/powerpc/include/asm/ppc405ex.h b/arch/powerpc/include/asm/ppc405ex.h
new file mode 100644
index 0000000..f2c860a
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc405ex.h
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC405EX_H_
+#define _PPC405EX_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
+
+#define CONFIG_NAND_NDFC
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+#endif /* _PPC405EX_H_ */
diff --git a/arch/powerpc/include/asm/ppc405ez.h b/arch/powerpc/include/asm/ppc405ez.h
new file mode 100644
index 0000000..69baa20
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc405ez.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC405EZ_H_
+#define _PPC405EZ_H_
+
+#define CONFIG_NAND_NDFC
+
+#define MAL_DCR_BASE 0x380
+
+#endif /* _PPC405EZ_H_ */
diff --git a/arch/powerpc/include/asm/ppc405gp.h b/arch/powerpc/include/asm/ppc405gp.h
new file mode 100644
index 0000000..50e0a19
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc405gp.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC405GP_H_
+#define _PPC405GP_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
+
+#endif /* _PPC405GP_H_ */
diff --git a/arch/powerpc/include/asm/ppc440.h b/arch/powerpc/include/asm/ppc440.h
index 6727753..766ea2a 100644
--- a/arch/powerpc/include/asm/ppc440.h
+++ b/arch/powerpc/include/asm/ppc440.h
@@ -29,6 +29,9 @@
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -50,14 +53,19 @@
#define CONFIG_SYS_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */
-/******************************************************************************
+/*
* DCRs & Related
- ******************************************************************************/
+ */
-/*-----------------------------------------------------------------------------
- | Clocking Controller
- +----------------------------------------------------------------------------*/
-/* values for clkcfga register - indirect addressing of these regs */
+/* Memory mapped registers */
+#define PCIL0_CFGADR (CONFIG_SYS_PCI_BASE + 0x0ec00000)
+#define PCIL0_CFGDATA (CONFIG_SYS_PCI_BASE + 0x0ec00004)
+#define PCIL0_CFGBASE (CONFIG_SYS_PCI_BASE + 0x0ec80000)
+#define PCIL0_IOBASE (CONFIG_SYS_PCI_BASE + 0x08000000)
+
+/* DCR registers */
+
+/* CPR register declarations */
#define CPR0_PLLC 0x0040
#define CPR0_PLLD 0x0060
#define CPR0_PRIMAD0 0x0080
@@ -68,108 +76,64 @@
#define CPR0_SPCID 0x0120
#define CPR0_ICFG 0x0140
-/* 440EPX boot strap options */
-#define BOOT_STRAP_OPTION_A 0x00000000
-#define BOOT_STRAP_OPTION_B 0x00000001
-#define BOOT_STRAP_OPTION_D 0x00000003
-#define BOOT_STRAP_OPTION_E 0x00000004
-
-/* 440gx sdr register definations */
-#define SDR0_SDSTP0 0x0020 /* */
-#define SDR0_SDSTP1 0x0021 /* */
+/* SDR register definations */
+#define SDR0_SDSTP0 0x0020
+#define SDR0_SDSTP1 0x0021
#define SDR0_PINSTP 0x0040
#define SDR0_SDCS0 0x0060
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_DDRCFG 0x00e0
-#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+#define SDR0_ECID0 0x0080
+#define SDR0_ECID1 0x0081
+#define SDR0_ECID2 0x0082
+#define SDR0_ECID3 0x0083
+#define SDR0_DDR0 0x00e1
#define SDR0_EBC 0x0100
-#define SDR0_UART0 0x0120 /* UART0 Config */
-#define SDR0_UART1 0x0121 /* UART1 Config */
-#define SDR0_UART2 0x0122 /* UART2 Config */
-#define SDR0_UART3 0x0123 /* UART3 Config */
+#define SDR0_UART0 0x0120
+#define SDR0_UART1 0x0121
+#define SDR0_UART2 0x0122
+#define SDR0_UART3 0x0123
#define SDR0_CP440 0x0180
#define SDR0_XCR 0x01c0
+#define SDR0_XCR0 0x01c0
#define SDR0_XPLLC 0x01c1
#define SDR0_XPLLD 0x01c2
#define SDR0_SRST 0x0200
-#define SD0_AMP0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */
-#define SD0_AMP1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define SDR0_PCI0 0x01c0
-#else
-#define SDR0_PCI0 0x0300
-#endif
+#define SDR0_SRST0 SDR0_SRST
+#define SDR0_SRST1 0x0201
+#define SDR0_AMP0 0x0240
+#define SDR0_AMP1 0x0241
#define SDR0_USB0 0x0320
#define SDR0_CUST0 0x4000
#define SDR0_CUST1 0x4002
-#define SDR0_PFC0 0x4100 /* Pin Function 0 */
-#define SDR0_PFC1 0x4101 /* Pin Function 1 */
-#define SDR0_MFR 0x4300 /* SDR0_MFR reg */
+#define SDR0_CUST2 0x4004
+#define SDR0_CUST3 0x4006
+#define SDR0_PFC0 0x4100
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC2 0x4102
+#define SDR0_PFC4 0x4104
+#define SDR0_MFR 0x4300
-#if defined(CONFIG_440GX)
-#define SD0_AMP 0x0240
-#define SDR0_XPLLC 0x01c1
-#define SDR0_XPLLD 0x01c2
-#define SDR0_XCR 0x01c0
-#define SDR0_SDSTP2 0x4001
-#define SDR0_SDSTP3 0x4003
-#endif /* CONFIG_440GX */
+#define SDR0_DDR0_DDRM_DECODE(n) ((((u32)(n)) >> 29) & 0x03)
-/*----------------------------------------------------------------------------+
-| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
-+----------------------------------------------------------------------------*/
-#define CCR0_PRE 0x40000000
-#define CCR0_CRPE 0x08000000
-#define CCR0_DSTG 0x00200000
-#define CCR0_DAPUIB 0x00100000
-#define CCR0_DTB 0x00008000
-#define CCR0_GICBT 0x00004000
-#define CCR0_GDCBT 0x00002000
-#define CCR0_FLSTA 0x00000100
-#define CCR0_ICSLC_MASK 0x0000000C
-#define CCR0_ICSLT_MASK 0x00000003
-#define CCR1_TCS_MASK 0x00000080
-#define CCR1_TCS_INTCLK 0x00000000
-#define CCR1_TCS_EXTCLK 0x00000080
-#define MMUCR_SWOA 0x01000000
-#define MMUCR_U1TE 0x00400000
-#define MMUCR_U2SWOAE 0x00200000
-#define MMUCR_DULXE 0x00800000
-#define MMUCR_IULXE 0x00400000
-#define MMUCR_STS 0x00100000
-#define MMUCR_STID_MASK 0x000000FF
+#define SDR0_PCI0_PAE_MASK (0x80000000 >> 0)
+#define SDR0_XCR0_PAE_MASK (0x80000000 >> 0)
-#ifdef CONFIG_440SPE
-#undef SDR0_SDSTP2
-#define SDR0_SDSTP2 0x0022
-#undef SDR0_SDSTP3
-#define SDR0_SDSTP3 0x0023
-#define SDR0_DDR0 0x00E1
-#define SDR0_UART2 0x0122
-#define SDR0_XCR0 0x01c0
-#define SDR0_XCR1 0x01c3
-#define SDR0_XCR2 0x01c6
-#define SDR0_XPLLC0 0x01c1
-#define SDR0_XPLLD0 0x01c2
-#define SDR0_XPLLC1 0x01c4 /* notRCW - SG */
-#define SDR0_XPLLD1 0x01c5 /* notRCW - SG */
-#define SDR0_XPLLC2 0x01c7 /* notRCW - SG */
-#define SDR0_XPLLD2 0x01c8 /* dnotRCW - SG */
-#define SD0_AMP0 0x0240
-#define SD0_AMP1 0x0241
-#define SDR0_CUST2 0x4004
-#define SDR0_CUST3 0x4006
-#define SDR0_SDSTP4 0x4001
-#define SDR0_SDSTP5 0x4003
-#define SDR0_SDSTP6 0x4005
-#define SDR0_SDSTP7 0x4007
+#define SDR0_PFC0_GEIE_MASK 0x00003e00
+#define SDR0_PFC0_GEIE_TRE 0x00003e00
+#define SDR0_PFC0_GEIE_NOTRE 0x00000000
+#define SDR0_PFC0_TRE_MASK (0x80000000 >> 23)
+#define SDR0_PFC0_TRE_DISABLE 0x00000000
+#define SDR0_PFC0_TRE_ENABLE (0x80000000 >> 23)
-#endif /* CONFIG_440SPE */
+/*
+ * Core Configuration/MMU configuration for 440
+ */
+#define CCR0_DAPUIB 0x00100000
+#define CCR0_DTB 0x00008000
-/*-----------------------------------------------------------------------------
- | External Bus Controller
- +----------------------------------------------------------------------------*/
-/* values for EBC0_CFGADDR register - indirect addressing of these regs */
+/*
+ * External Bus Controller
+ */
+/* Values for EBC0_CFGADDR register - indirect addressing of these regs */
#define PB0CR 0x00 /* periph bank 0 config reg */
#define PB1CR 0x01 /* periph bank 1 config reg */
#define PB2CR 0x02 /* periph bank 2 config reg */
@@ -190,1583 +154,9 @@
#define PBESR 0x21 /* periph bus error status reg */
#define EBC0_CFG 0x23 /* external bus configuration reg */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
- /* PLB3 Arbiter */
-#define PLB3_DCR_BASE 0x070
-#define PLB3_ACR (PLB3_DCR_BASE + 0x7)
-
- /* PLB4 Arbiter - PowerPC440EP Pass1 */
-#define PLB4_DCR_BASE 0x080
-#define PLB4_ACR (PLB4_DCR_BASE + 0x1)
-
-#define PLB4_ACR_WRP (0x80000000 >> 7)
-
- /* Pin Function Control Register 1 */
-#define SDR0_PFC1 0x4101
-#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
-#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
-#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
-#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
-#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
-#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
-#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
-#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
-#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
-#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
-#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
-#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
-#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold
- Req Selection */
-#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
-#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
-#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
- Selection */
-#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
-#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
-#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
- Selection */
-#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En.
- Selected */
-#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
-#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
- Selection */
-#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
- Disable */
-#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
- Enable */
-
-#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor Enable
- Selection */
-#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
- Gated In */
-
- /* USB Control Register */
-#define SDR0_USB0 0x0320
-#define SDR0_USB0_USB_DEVSEL_MASK 0x00000002 /* USB Device Selection */
-#define SDR0_USB0_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
-#define SDR0_USB0_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
-#define SDR0_USB0_LEEN_MASK 0x00000001 /* Little Endian selection */
-#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
-#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
-
- /* Miscealleneaous Function Reg. */
-#define SDR0_MFR 0x4300
-#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
-#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
-
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Ena. on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
-
-#define GPT0_COMP6 0x00000098
-#define GPT0_COMP5 0x00000094
-#define GPT0_COMP4 0x00000090
-#define GPT0_COMP3 0x0000008C
-#define GPT0_COMP2 0x00000088
-#define GPT0_COMP1 0x00000084
-
-#define GPT0_MASK6 0x000000D8
-#define GPT0_MASK5 0x000000D4
-#define GPT0_MASK4 0x000000D0
-#define GPT0_MASK3 0x000000CC
-#define GPT0_MASK2 0x000000C8
-#define GPT0_MASK1 0x000000C4
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_USB2D0CR 0x0320
-#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC
- Master Selection */
-#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection*/
-#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
-
-#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface
- Selection */
-#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
-#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
-
-#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
-#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
-#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
-
- /* USB2 Host Control Register */
-#define SDR0_USB2H0CR 0x0340
-#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface*/
-#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
-#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
-#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length
- Adjustment */
-
- /* Pin Function Control Register 1 */
-#define SDR0_PFC1 0x4101
-#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
-#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
-#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
-
-#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select
- EMAC 0 */
-#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII
- bridge */
-
-#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
-#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
-#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
-#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
-#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
-#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
-#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
-#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
-#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
-#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req
- Selection */
-#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
-#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
-#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
- Selection */
-#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
-#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
-#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
- Selection */
-#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
-#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
-#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
- Selection */
-#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
- Disable */
-#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
- Enable */
-
-#define SDR0_PFC1_PLB_PME_MASK 0x00001000
- /* PLB3/PLB4 Perf. Monitor En. Selection */
-#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000
- /* PLB3 Performance Monitor Enable */
-#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000
- /* PLB3 Performance Monitor Enable */
-#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
- Gated In */
-
- /* Ethernet PLL Configuration Register */
-#define SDR0_PFC2 0x4102
-#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */
-#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication
- selector */
-#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */
-#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */
-
-#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */
-#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
-
-#define SDR0_PFC4 0x4104
-
- /* USB2PHY0 Control Register */
-#define SDR0_USB2PHY0CR 0x4103
-#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000
-
- /* PHY UTMI interface connection */
-#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
-#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
-
-#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
-#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
-#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
-
-#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000
- /* VBus detect (Device mode only) */
-#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000
- /* Pull-up resistance on D+ is disabled */
-#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000
- /* Pull-up resistance on D+ is enabled */
-
-#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000
- /* PHY UTMI data width and clock select */
-#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
-#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
-
-#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
-#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
-#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000
- /* Loop back enabled (only test purposes) */
-
-#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000
- /* Force XO block on during a suspend */
-#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
-#define SDR0_USB2PHY0CR_XO_OFF 0x04000000
- /* PHY XO block is powered-off when all ports are suspended */
-
-#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
-#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
-#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only
- for full-speed operation */
-
-#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock
- source */
-#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal
- 48M clock as a reference */
-#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO
- block output as a reference */
-
-#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO
- block*/
-#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external
- clock */
-#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock
- from a crystal */
-
-#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
-#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq
- = 12 MHz */
-#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq
- = 48 MHz */
-#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq
- = 24 MHz */
-
- /* Miscealleneaous Function Reg. */
-#define SDR0_MFR 0x4300
-#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
-
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Ena. on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
-
-#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
-
- /* CUST1 Customer Configuration Register1 */
-#define SDR0_CUST1 0x4002
-#define SDR0_CUST1_NDRSC_MASK 0xFFFF0000 /* NDRSC Device Read Count */
-#define SDR0_CUST1_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define SDR0_CUST1_NDRSC_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-
- /* Pin Function Control Register 0 */
-#define SDR0_PFC0 0x4100
-#define SDR0_PFC0_CPU_TR_EN_MASK 0x00000100 /* CPU Trace Enable Mask */
-#define SDR0_PFC0_CPU_TRACE_EN 0x00000100 /* CPU Trace Enable */
-#define SDR0_PFC0_CPU_TRACE_DIS 0x00000100 /* CPU Trace Disable */
-#define SDR0_PFC0_CTE_ENCODE(n) ((((unsigned long)(n))&0x01)<<8)
-#define SDR0_PFC0_CTE_DECODE(n) ((((unsigned long)(n))>>8)&0x01)
-
- /* Pin Function Control Register 1 */
-#define SDR0_PFC1 0x4101
-#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
-#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
-#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
-#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
-#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
-#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
-#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
-#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
-#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
-#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
-#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
-#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
-#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req
- Selection */
-#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
-#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
-#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
- Selection */
-#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
-#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
-#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
- Selection */
-#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
-#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
-#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
- Selection */
-#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
- Disable */
-#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
- Enable */
-
-#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En.
- Selection */
-#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
- Gated In */
-
-#endif /* 440EP || 440GR || 440EPX || 440GRX */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- /* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0 0x4000
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
-#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
-#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
-
-#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
-#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
-#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
-#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
-#endif
-
-/*-----------------------------------------------------------------------------
- | On-Chip Buses
- +----------------------------------------------------------------------------*/
-/* TODO: as needed */
-
-/*-----------------------------------------------------------------------------
- | Clocking, Power Management and Chip Control
- +----------------------------------------------------------------------------*/
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define CNTRL_DCR_BASE 0x160
-#else
-#define CNTRL_DCR_BASE 0x0b0
-#endif
-
-#define CPC0_SYS0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
-#define CPC0_SYS1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
-
-#define CPC0_STRP0 (CNTRL_DCR_BASE+0x34) /* Power-on config reg 0 (RO) */
-#define CPC0_STRP1 (CNTRL_DCR_BASE+0x35) /* Power-on config reg 1 (RO) */
-
-#define CPC0_GPIO (CNTRL_DCR_BASE+0x38) /* GPIO config reg (440GP) */
-
-#define CPC0_CR0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
-#define CPC0_CR1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
-
-/*-----------------------------------------------------------------------------
- | DMA
- +----------------------------------------------------------------------------*/
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define DMA_DCR_BASE 0x200
-#else
-#define DMA_DCR_BASE 0x100
-#endif
-#define DMACR0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
-#define DMACT0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
-#define DMACR1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
-#define DMACT1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
-#define DMACR2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
-#define DMACT2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
-#define DMACR3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
-#define DMASR (DMA_DCR_BASE+0x20) /* DMA status register */
-#define DMASGC (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
-
-/*-----------------------------------------------------------------------------
- | Memory Access Layer
- +----------------------------------------------------------------------------*/
-#define MAL_DCR_BASE 0x180
-#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
-#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Error Status (Read/Clear) */
-#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
-#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */
-#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */
-#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status*/
-#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int */
-#define MAL0_TXBADDR (MAL_DCR_BASE + 0x09) /* TX descriptor base addr*/
-#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */
-#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */
-#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status*/
-#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int */
-#define MAL0_RXBADDR (MAL_DCR_BASE + 0x15) /* RX descriptor base addr */
-#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table pointer */
-#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table pointer */
-#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table pointer */
-#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table pointer */
-#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table pointer */
-#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table pointer */
-#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */
-#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table pointer */
-#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table pointer */
-#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table pointer */
-#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table pointer*/
-#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table pointer*/
-#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */
-#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */
-#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
-#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
-#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
-#endif /* CONFIG_440GX */
-
-/*-----------------------------------------------------------------------------+
-| SDR0 Bit Settings
-+-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440SP)
-#define SDR0_DDR0 0x00E1
-#define SDR0_DDR0_DPLLRST 0x80000000
-#define SDR0_DDR0_DDRM_MASK 0x60000000
-#define SDR0_DDR0_DDRM_DDR1 0x20000000
-#define SDR0_DDR0_DDRM_DDR2 0x40000000
-#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
-#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
-#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
-#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
-#endif
-
-#if defined(CONFIG_440SPE) || defined(CONFIG_460SX)
-#define SDR0_CP440 0x0180
-#define SDR0_CP440_ERPN_MASK 0x30000000
-#define SDR0_CP440_ERPN_MASK_HI 0x3000
-#define SDR0_CP440_ERPN_MASK_LO 0x0000
-#define SDR0_CP440_ERPN_EBC 0x10000000
-#define SDR0_CP440_ERPN_EBC_HI 0x1000
-#define SDR0_CP440_ERPN_EBC_LO 0x0000
-#define SDR0_CP440_ERPN_PCI 0x20000000
-#define SDR0_CP440_ERPN_PCI_HI 0x2000
-#define SDR0_CP440_ERPN_PCI_LO 0x0000
-#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
-#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
-#define SDR0_CP440_NTO1_MASK 0x00000002
-#define SDR0_CP440_NTO1_NTOP 0x00000000
-#define SDR0_CP440_NTO1_NTO1 0x00000002
-#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
-#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
-
-#define SDR0_SDSTP0 0x0020
-#define SDR0_SDSTP0_ENG_MASK 0x80000000
-#define SDR0_SDSTP0_ENG_PLLDIS 0x00000000
-#define SDR0_SDSTP0_ENG_PLLENAB 0x80000000
-#define SDR0_SDSTP0_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
-#define SDR0_SDSTP0_ENG_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
-#define SDR0_SDSTP0_SRC_MASK 0x40000000
-#define SDR0_SDSTP0_SRC_PLLOUTA 0x00000000
-#define SDR0_SDSTP0_SRC_PLLOUTB 0x40000000
-#define SDR0_SDSTP0_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define SDR0_SDSTP0_SRC_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define SDR0_SDSTP0_SEL_MASK 0x38000000
-#define SDR0_SDSTP0_SEL_PLLOUT 0x00000000
-#define SDR0_SDSTP0_SEL_CPU 0x08000000
-#define SDR0_SDSTP0_SEL_EBC 0x28000000
-#define SDR0_SDSTP0_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<27)
-#define SDR0_SDSTP0_SEL_DECODE(n) ((((unsigned long)(n))>>27)&0x07)
-#define SDR0_SDSTP0_TUNE_MASK 0x07FE0000
-#define SDR0_SDSTP0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<17)
-#define SDR0_SDSTP0_TUNE_DECODE(n) ((((unsigned long)(n))>>17)&0x3FF)
-#define SDR0_SDSTP0_FBDV_MASK 0x0001F000
-#define SDR0_SDSTP0_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
-#define SDR0_SDSTP0_FBDV_DECODE(n) ((((((unsigned long)(n))>>12)-1)&0x1F)+1)
-#define SDR0_SDSTP0_FWDVA_MASK 0x00000F00
-#define SDR0_SDSTP0_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<8)
-#define SDR0_SDSTP0_FWDVA_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x0F)+1)
-#define SDR0_SDSTP0_FWDVB_MASK 0x000000E0
-#define SDR0_SDSTP0_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<5)
-#define SDR0_SDSTP0_FWDVB_DECODE(n) ((((((unsigned long)(n))>>5)-1)&0x07)+1)
-#define SDR0_SDSTP0_PRBDV0_MASK 0x0000001C
-#define SDR0_SDSTP0_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<2)
-#define SDR0_SDSTP0_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>2)-1)&0x07)+1)
-#define SDR0_SDSTP0_OPBDV0_MASK 0x00000003
-#define SDR0_SDSTP0_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<0)
-#define SDR0_SDSTP0_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x03)+1)
-
-
-#define SDR0_SDSTP1 0x0021
-#define SDR0_SDSTP1_LFBDV_MASK 0xFC000000
-#define SDR0_SDSTP1_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<26)
-#define SDR0_SDSTP1_LFBDV_DECODE(n) ((((unsigned long)(n))>>26)&0x3F)
-#define SDR0_SDSTP1_PERDV0_MASK 0x03000000
-#define SDR0_SDSTP1_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define SDR0_SDSTP1_PERDV0_DECODE(n) ((((unsigned long)(n))>>24)&0x03)
-#define SDR0_SDSTP1_MALDV0_MASK 0x00C00000
-#define SDR0_SDSTP1_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<22)
-#define SDR0_SDSTP1_MALDV0_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
-#define SDR0_SDSTP1_DDR_MODE_MASK 0x00300000
-#define SDR0_SDSTP1_DDR1_MODE 0x00100000
-#define SDR0_SDSTP1_DDR2_MODE 0x00200000
-#define SDR0_SDSTP1_DDR_ENCODE(n) ((((unsigned long)(n))&0x03)<<20)
-#define SDR0_SDSTP1_DDR_DECODE(n) ((((unsigned long)(n))>>20)&0x03)
-#define SDR0_SDSTP1_ERPN_MASK 0x00080000
-#define SDR0_SDSTP1_ERPN_EBC 0x00000000
-#define SDR0_SDSTP1_ERPN_PCI 0x00080000
-#define SDR0_SDSTP1_PAE_MASK 0x00040000
-#define SDR0_SDSTP1_PAE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PAE_ENABLE 0x00040000
-#define SDR0_SDSTP1_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
-#define SDR0_SDSTP1_PAE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
-#define SDR0_SDSTP1_PHCE_MASK 0x00020000
-#define SDR0_SDSTP1_PHCE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PHCE_ENABLE 0x00020000
-#define SDR0_SDSTP1_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
-#define SDR0_SDSTP1_PHCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
-#define SDR0_SDSTP1_PISE_MASK 0x00010000
-#define SDR0_SDSTP1_PISE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PISE_ENABLE 0x00001000
-#define SDR0_SDSTP1_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
-#define SDR0_SDSTP1_PISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
-#define SDR0_SDSTP1_PCWE_MASK 0x00008000
-#define SDR0_SDSTP1_PCWE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PCWE_ENABLE 0x00008000
-#define SDR0_SDSTP1_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
-#define SDR0_SDSTP1_PCWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
-#define SDR0_SDSTP1_PPIM_MASK 0x00007800
-#define SDR0_SDSTP1_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
-#define SDR0_SDSTP1_PPIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
-#define SDR0_SDSTP1_PR64E_MASK 0x00000400
-#define SDR0_SDSTP1_PR64E_DISABLE 0x00000000
-#define SDR0_SDSTP1_PR64E_ENABLE 0x00000400
-#define SDR0_SDSTP1_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<10)
-#define SDR0_SDSTP1_PR64E_DECODE(n) ((((unsigned long)(n))>>10)&0x01)
-#define SDR0_SDSTP1_PXFS_MASK 0x00000300
-#define SDR0_SDSTP1_PXFS_100_133 0x00000000
-#define SDR0_SDSTP1_PXFS_66_100 0x00000100
-#define SDR0_SDSTP1_PXFS_50_66 0x00000200
-#define SDR0_SDSTP1_PXFS_0_50 0x00000300
-#define SDR0_SDSTP1_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
-#define SDR0_SDSTP1_PXFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
-#define SDR0_SDSTP1_EBCW_MASK 0x00000080 /* SOP */
-#define SDR0_SDSTP1_EBCW_8_BITS 0x00000000 /* SOP */
-#define SDR0_SDSTP1_EBCW_16_BITS 0x00000080 /* SOP */
-#define SDR0_SDSTP1_DBGEN_MASK 0x00000030 /* $218C */
-#define SDR0_SDSTP1_DBGEN_FUNC 0x00000000
-#define SDR0_SDSTP1_DBGEN_TRACE 0x00000010
-#define SDR0_SDSTP1_DBGEN_ENCODE(n) ((((unsigned long)(n))&0x03)<<4) /* $218C */
-#define SDR0_SDSTP1_DBGEN_DECODE(n) ((((unsigned long)(n))>>4)&0x03) /* $218C */
-#define SDR0_SDSTP1_ETH_MASK 0x00000004
-#define SDR0_SDSTP1_ETH_10_100 0x00000000
-#define SDR0_SDSTP1_ETH_GIGA 0x00000004
-#define SDR0_SDSTP1_ETH_ENCODE(n) ((((unsigned long)(n))&0x01)<<2)
-#define SDR0_SDSTP1_ETH_DECODE(n) ((((unsigned long)(n))>>2)&0x01)
-#define SDR0_SDSTP1_NTO1_MASK 0x00000001
-#define SDR0_SDSTP1_NTO1_DISABLE 0x00000000
-#define SDR0_SDSTP1_NTO1_ENABLE 0x00000001
-#define SDR0_SDSTP1_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<0)
-#define SDR0_SDSTP1_NTO1_DECODE(n) ((((unsigned long)(n))>>0)&0x01)
-
-#define SDR0_SDSTP2 0x0022
-#define SDR0_SDSTP2_P1AE_MASK 0x80000000
-#define SDR0_SDSTP2_P1AE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P1AE_ENABLE 0x80000000
-#define SDR0_SDSTP2_P1AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
-#define SDR0_SDSTP2_P1AE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
-#define SDR0_SDSTP2_P1HCE_MASK 0x40000000
-#define SDR0_SDSTP2_P1HCE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P1HCE_ENABLE 0x40000000
-#define SDR0_SDSTP2_P1HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define SDR0_SDSTP2_P1HCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define SDR0_SDSTP2_P1ISE_MASK 0x20000000
-#define SDR0_SDSTP2_P1ISE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P1ISE_ENABLE 0x20000000
-#define SDR0_SDSTP2_P1ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define SDR0_SDSTP2_P1ISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define SDR0_SDSTP2_P1CWE_MASK 0x10000000
-#define SDR0_SDSTP2_P1CWE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P1CWE_ENABLE 0x10000000
-#define SDR0_SDSTP2_P1CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
-#define SDR0_SDSTP2_P1CWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
-#define SDR0_SDSTP2_P1PIM_MASK 0x0F000000
-#define SDR0_SDSTP2_P1PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
-#define SDR0_SDSTP2_P1PIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
-#define SDR0_SDSTP2_P1R64E_MASK 0x00800000
-#define SDR0_SDSTP2_P1R64E_DISABLE 0x00000000
-#define SDR0_SDSTP2_P1R64E_ENABLE 0x00800000
-#define SDR0_SDSTP2_P1R64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
-#define SDR0_SDSTP2_P1R64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
-#define SDR0_SDSTP2_P1XFS_MASK 0x00600000
-#define SDR0_SDSTP2_P1XFS_100_133 0x00000000
-#define SDR0_SDSTP2_P1XFS_66_100 0x00200000
-#define SDR0_SDSTP2_P1XFS_50_66 0x00400000
-#define SDR0_SDSTP2_P1XFS_0_50 0x00600000
-#define SDR0_SDSTP2_P1XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
-#define SDR0_SDSTP2_P1XFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
-#define SDR0_SDSTP2_P2AE_MASK 0x00040000
-#define SDR0_SDSTP2_P2AE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P2AE_ENABLE 0x00040000
-#define SDR0_SDSTP2_P2AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
-#define SDR0_SDSTP2_P2AE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
-#define SDR0_SDSTP2_P2HCE_MASK 0x00020000
-#define SDR0_SDSTP2_P2HCE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P2HCE_ENABLE 0x00020000
-#define SDR0_SDSTP2_P2HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
-#define SDR0_SDSTP2_P2HCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
-#define SDR0_SDSTP2_P2ISE_MASK 0x00010000
-#define SDR0_SDSTP2_P2ISE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P2ISE_ENABLE 0x00010000
-#define SDR0_SDSTP2_P2ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
-#define SDR0_SDSTP2_P2ISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
-#define SDR0_SDSTP2_P2CWE_MASK 0x00008000
-#define SDR0_SDSTP2_P2CWE_DISABLE 0x00000000
-#define SDR0_SDSTP2_P2CWE_ENABLE 0x00008000
-#define SDR0_SDSTP2_P2CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
-#define SDR0_SDSTP2_P2CWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
-#define SDR0_SDSTP2_P2PIM_MASK 0x00007800
-#define SDR0_SDSTP2_P2PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
-#define SDR0_SDSTP2_P2PIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
-#define SDR0_SDSTP2_P2XFS_MASK 0x00000300
-#define SDR0_SDSTP2_P2XFS_100_133 0x00000000
-#define SDR0_SDSTP2_P2XFS_66_100 0x00000100
-#define SDR0_SDSTP2_P2XFS_50_66 0x00000200
-#define SDR0_SDSTP2_P2XFS_0_50 0x00000100
-#define SDR0_SDSTP2_P2XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
-#define SDR0_SDSTP2_P2XFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
-
-#define SDR0_SDSTP3 0x0023
-
-#define SDR0_PINSTP 0x0040
-#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */
-#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0
- (EBC boot) */
-#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1
- (PCI boot) */
-#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled -
- Addr = 0x54 */
-#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled -
- Addr = 0x50 */
-#define SDR0_SDCS 0x0060
-#define SDR0_ECID0 0x0080
-#define SDR0_ECID1 0x0081
-#define SDR0_ECID2 0x0082
-#define SDR0_JTAG 0x00C0
-
-#define SDR0_DDR0 0x00E1
-#define SDR0_DDR0_DPLLRST 0x80000000
-#define SDR0_DDR0_DDRM_MASK 0x60000000
-#define SDR0_DDR0_DDRM_DDR1 0x20000000
-#define SDR0_DDR0_DDRM_DDR2 0x40000000
-#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
-#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
-#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
-#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
-
-#define SDR0_UART0 0x0120
-#define SDR0_UART1 0x0121
-#define SDR0_UART2 0x0122
-#define SDR0_SLPIPE 0x0220
-
-#define SDR0_AMP0 0x0240
-#define SDR0_AMP0_PRIORITY 0xFFFF0000
-#define SDR0_AMP0_ALTERNATE_PRIORITY 0x0000FF00
-#define SDR0_AMP0_RESERVED_BITS_MASK 0x000000FF
-
-#define SDR0_AMP1 0x0241
-#define SDR0_AMP1_PRIORITY 0xFC000000
-#define SDR0_AMP1_ALTERNATE_PRIORITY 0x0000E000
-#define SDR0_AMP1_RESERVED_BITS_MASK 0x03FF1FFF
-
-#define SDR0_MIRQ0 0x0260
-#define SDR0_MIRQ1 0x0261
-#define SDR0_MALTBL 0x0280
-#define SDR0_MALRBL 0x02A0
-#define SDR0_MALTBS 0x02C0
-#define SDR0_MALRBS 0x02E0
-
-/* Reserved for Customer Use */
-#define SDR0_CUST0 0x4000
-#define SDR0_CUST0_AUTONEG_MASK 0x8000000
-#define SDR0_CUST0_NO_AUTONEG 0x0000000
-#define SDR0_CUST0_AUTONEG 0x8000000
-#define SDR0_CUST0_ETH_FORCE_MASK 0x6000000
-#define SDR0_CUST0_ETH_FORCE_10MHZ 0x0000000
-#define SDR0_CUST0_ETH_FORCE_100MHZ 0x2000000
-#define SDR0_CUST0_ETH_FORCE_1000MHZ 0x4000000
-#define SDR0_CUST0_ETH_DUPLEX_MASK 0x1000000
-#define SDR0_CUST0_ETH_HALF_DUPLEX 0x0000000
-#define SDR0_CUST0_ETH_FULL_DUPLEX 0x1000000
-
-#define SDR0_SDSTP4 0x4001
-#define SDR0_CUST1 0x4002
-#define SDR0_SDSTP5 0x4003
-#define SDR0_CUST2 0x4004
-#define SDR0_SDSTP6 0x4005
-#define SDR0_CUST3 0x4006
-#define SDR0_SDSTP7 0x4007
-
-#define SDR0_PFC0 0x4100
-#define SDR0_PFC0_GPIO_0 0x80000000
-#define SDR0_PFC0_PCIX0REQ2_N 0x00000000
-#define SDR0_PFC0_GPIO_1 0x40000000
-#define SDR0_PFC0_PCIX0REQ3_N 0x00000000
-#define SDR0_PFC0_GPIO_2 0x20000000
-#define SDR0_PFC0_PCIX0GNT2_N 0x00000000
-#define SDR0_PFC0_GPIO_3 0x10000000
-#define SDR0_PFC0_PCIX0GNT3_N 0x00000000
-#define SDR0_PFC0_GPIO_4 0x08000000
-#define SDR0_PFC0_PCIX1REQ2_N 0x00000000
-#define SDR0_PFC0_GPIO_5 0x04000000
-#define SDR0_PFC0_PCIX1REQ3_N 0x00000000
-#define SDR0_PFC0_GPIO_6 0x02000000
-#define SDR0_PFC0_PCIX1GNT2_N 0x00000000
-#define SDR0_PFC0_GPIO_7 0x01000000
-#define SDR0_PFC0_PCIX1GNT3_N 0x00000000
-#define SDR0_PFC0_GPIO_8 0x00800000
-#define SDR0_PFC0_PERREADY 0x00000000
-#define SDR0_PFC0_GPIO_9 0x00400000
-#define SDR0_PFC0_PERCS1_N 0x00000000
-#define SDR0_PFC0_GPIO_10 0x00200000
-#define SDR0_PFC0_PERCS2_N 0x00000000
-#define SDR0_PFC0_GPIO_11 0x00100000
-#define SDR0_PFC0_IRQ0 0x00000000
-#define SDR0_PFC0_GPIO_12 0x00080000
-#define SDR0_PFC0_IRQ1 0x00000000
-#define SDR0_PFC0_GPIO_13 0x00040000
-#define SDR0_PFC0_IRQ2 0x00000000
-#define SDR0_PFC0_GPIO_14 0x00020000
-#define SDR0_PFC0_IRQ3 0x00000000
-#define SDR0_PFC0_GPIO_15 0x00010000
-#define SDR0_PFC0_IRQ4 0x00000000
-#define SDR0_PFC0_GPIO_16 0x00008000
-#define SDR0_PFC0_IRQ5 0x00000000
-#define SDR0_PFC0_GPIO_17 0x00004000
-#define SDR0_PFC0_PERBE0_N 0x00000000
-#define SDR0_PFC0_GPIO_18 0x00002000
-#define SDR0_PFC0_PCI0GNT0_N 0x00000000
-#define SDR0_PFC0_GPIO_19 0x00001000
-#define SDR0_PFC0_PCI0GNT1_N 0x00000000
-#define SDR0_PFC0_GPIO_20 0x00000800
-#define SDR0_PFC0_PCI0REQ0_N 0x00000000
-#define SDR0_PFC0_GPIO_21 0x00000400
-#define SDR0_PFC0_PCI0REQ1_N 0x00000000
-#define SDR0_PFC0_GPIO_22 0x00000200
-#define SDR0_PFC0_PCI1GNT0_N 0x00000000
-#define SDR0_PFC0_GPIO_23 0x00000100
-#define SDR0_PFC0_PCI1GNT1_N 0x00000000
-#define SDR0_PFC0_GPIO_24 0x00000080
-#define SDR0_PFC0_PCI1REQ0_N 0x00000000
-#define SDR0_PFC0_GPIO_25 0x00000040
-#define SDR0_PFC0_PCI1REQ1_N 0x00000000
-#define SDR0_PFC0_GPIO_26 0x00000020
-#define SDR0_PFC0_PCI2GNT0_N 0x00000000
-#define SDR0_PFC0_GPIO_27 0x00000010
-#define SDR0_PFC0_PCI2GNT1_N 0x00000000
-#define SDR0_PFC0_GPIO_28 0x00000008
-#define SDR0_PFC0_PCI2REQ0_N 0x00000000
-#define SDR0_PFC0_GPIO_29 0x00000004
-#define SDR0_PFC0_PCI2REQ1_N 0x00000000
-#define SDR0_PFC0_GPIO_30 0x00000002
-#define SDR0_PFC0_UART1RX 0x00000000
-#define SDR0_PFC0_GPIO_31 0x00000001
-#define SDR0_PFC0_UART1TX 0x00000000
-
-#define SDR0_PFC1 0x4101
-#define SDR0_PFC1_UART1_CTS_RTS_MASK 0x02000000
-#define SDR0_PFC1_UART1_DSR_DTR 0x00000000
-#define SDR0_PFC1_UART1_CTS_RTS 0x02000000
-#define SDR0_PFC1_UART2_IN_SERVICE_MASK 0x01000000
-#define SDR0_PFC1_UART2_NOT_IN_SERVICE 0x00000000
-#define SDR0_PFC1_UART2_IN_SERVICE 0x01000000
-#define SDR0_PFC1_ETH_GIGA_MASK 0x00200000
-#define SDR0_PFC1_ETH_10_100 0x00000000
-#define SDR0_PFC1_ETH_GIGA 0x00200000
-#define SDR0_PFC1_ETH_GIGA_ENCODE(n) ((((unsigned long)(n))&0x1)<<21)
-#define SDR0_PFC1_ETH_GIGA_DECODE(n) ((((unsigned long)(n))>>21)&0x01)
-#define SDR0_PFC1_CPU_TRACE_MASK 0x00180000 /* $218C */
-#define SDR0_PFC1_CPU_NO_TRACE 0x00000000
-#define SDR0_PFC1_CPU_TRACE 0x00080000
-#define SDR0_PFC1_CPU_TRACE_ENCODE(n) ((((unsigned long)(n))&0x3)<<19)
- /* $218C */
-#define SDR0_PFC1_CPU_TRACE_DECODE(n) ((((unsigned long)(n))>>19)&0x03)
- /* $218C */
-
-#define SDR0_MFR 0x4300
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-/* Pin Function Control Register 0 (SDR0_PFC0) */
-#define SDR0_PFC0 0x4100
-#define SDR0_PFC0_DBG 0x00008000 /* debug enable */
-#define SDR0_PFC0_G49E 0x00004000 /* GPIO 49 enable */
-#define SDR0_PFC0_G50E 0x00002000 /* GPIO 50 enable */
-#define SDR0_PFC0_G51E 0x00001000 /* GPIO 51 enable */
-#define SDR0_PFC0_G52E 0x00000800 /* GPIO 52 enable */
-#define SDR0_PFC0_G53E 0x00000400 /* GPIO 53 enable */
-#define SDR0_PFC0_G54E 0x00000200 /* GPIO 54 enable */
-#define SDR0_PFC0_G55E 0x00000100 /* GPIO 55 enable */
-#define SDR0_PFC0_G56E 0x00000080 /* GPIO 56 enable */
-#define SDR0_PFC0_G57E 0x00000040 /* GPIO 57 enable */
-#define SDR0_PFC0_G58E 0x00000020 /* GPIO 58 enable */
-#define SDR0_PFC0_G59E 0x00000010 /* GPIO 59 enable */
-#define SDR0_PFC0_G60E 0x00000008 /* GPIO 60 enable */
-#define SDR0_PFC0_G61E 0x00000004 /* GPIO 61 enable */
-#define SDR0_PFC0_G62E 0x00000002 /* GPIO 62 enable */
-#define SDR0_PFC0_G63E 0x00000001 /* GPIO 63 enable */
-
-/* Pin Function Control Register 1 (SDR0_PFC1) */
-#define SDR0_PFC1 0x4101
-#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
-#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
-#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
-#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
-#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
-#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
-#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
-#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins*/
-#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins*/
-#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
-#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
-#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
-
-#define SDR0_ECID0 0x0080
-#define SDR0_ECID1 0x0081
-#define SDR0_ECID2 0x0082
-#define SDR0_ECID3 0x0083
-
-/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
-#define SDR0_ETH_PLL 0x4102
-#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /*Ethernet PLL lock indication*/
-#define SDR0_ETH_PLL_REF_CLK_SEL 0x10000000 /* Ethernet reference clock */
-#define SDR0_ETH_PLL_BYPASS 0x08000000 /* bypass mode enable */
-#define SDR0_ETH_PLL_STOPCLK 0x04000000 /* output clock disable */
-#define SDR0_ETH_PLL_TUNE_MASK 0x03FF0000 /* loop stability tuning bits */
-#define SDR0_ETH_PLL_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3ff)<<16)
-#define SDR0_ETH_PLL_MULTI_MASK 0x0000FF00 /* frequency multiplication */
-#define SDR0_ETH_PLL_MULTI_ENCODE(n) ((((unsigned long)(n))&0xff)<<8)
-#define SDR0_ETH_PLL_RANGEB_MASK 0x000000F0 /* PLLOUTB/C frequency */
-#define SDR0_ETH_PLL_RANGEB_ENCODE(n) ((((unsigned long)(n))&0x0f)<<4)
-#define SDR0_ETH_PLL_RANGEA_MASK 0x0000000F /* PLLOUTA frequency */
-#define SDR0_ETH_PLL_RANGEA_ENCODE(n) (((unsigned long)(n))&0x0f)
-
-/* Ethernet Configuration Register (SDR0_ETH_CFG) */
-#define SDR0_ETH_CFG 0x4103
-#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /*SGMII3 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /*SGMII2 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /*SGMII1 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /*SGMII0 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /*SGMII Mask */
-#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /*SGMII2 port enable */
-#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /*SGMII1 port enable */
-#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /*SGMII0 port enable */
-#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /*TAHOE1 Bypass selector */
-#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /*TAHOE0 Bypass selector */
-#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /*EMAC 3 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /*EMAC 2 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /*EMAC 1 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /*EMAC 0 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /*Swap EMAC2 with EMAC1 */
-#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /*Swap EMAC0 with EMAC3 */
-#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /*MDIO source selector mask*/
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /*MDIO source - EMAC0 */
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /*MDIO source - EMAC1 */
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /*MDIO source - EMAC2 */
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /*MDIO source - EMAC3 */
-#define SDR0_ETH_CFG_ZMII_MODE_MASK 0x0000000C /*ZMII bridge mode selector
- mask */
-#define SDR0_ETH_CFG_ZMII_SEL_MII 0x00000000 /*ZMII bridge mode - MII */
-#define SDR0_ETH_CFG_ZMII_SEL_SMII 0x00000004 /*ZMII bridge mode - SMII */
-#define SDR0_ETH_CFG_ZMII_SEL_RMII_10 0x00000008 /*ZMII bridge mode - RMII
- (10 Mbps) */
-#define SDR0_ETH_CFG_ZMII_SEL_RMII_100 0x0000000C /*ZMII bridge mode - RMII
- (100 Mbps) */
-#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /*GMC Port 1 bridge
- selector */
-#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /*GMC Port 0 bridge
- selector */
-
-#define SDR0_ETH_CFG_ZMII_MODE_SHIFT 4
-#define SDR0_ETH_CFG_ZMII_MII_MODE 0x00
-#define SDR0_ETH_CFG_ZMII_SMII_MODE 0x01
-#define SDR0_ETH_CFG_ZMII_RMII_MODE_10M 0x10
-#define SDR0_ETH_CFG_ZMII_RMII_MODE_100M 0x11
-
-/* Ethernet Status Register */
-#define SDR0_ETH_STS 0x4104
-
-/* Miscealleneaous Function Reg. (SDR0_MFR) */
-#define SDR0_MFR 0x4300
-#define SDR0_MFR_T0TxFL 0x00800000 /* force parity error TAHOE0 Tx
- FIFO bits 0:63 */
-#define SDR0_MFR_T0TxFH 0x00400000 /* force parity error TAHOE0 Tx
- FIFO bits 64:127 */
-#define SDR0_MFR_T1TxFL 0x00200000 /* force parity error TAHOE1 Tx
- FIFO bits 0:63 */
-#define SDR0_MFR_T1TxFH 0x00100000 /* force parity error TAHOE1 Tx
- FIFO bits 64:127 */
-#define SDR0_MFR_E0TxFL 0x00008000 /* force parity error EMAC0 Tx
- FIFO bits 0:63 */
-#define SDR0_MFR_E0TxFH 0x00004000 /* force parity error EMAC0 Tx
- FIFO bits 64:127 */
-#define SDR0_MFR_E0RxFL 0x00002000 /* force parity error EMAC0 Rx
- FIFO bits 0:63 */
-#define SDR0_MFR_E0RxFH 0x00001000 /* force parity error EMAC0 Rx
- FIFO bits 64:127 */
-#define SDR0_MFR_E1TxFL 0x00000800 /* force parity error EMAC1 Tx
- FIFO bits 0:63 */
-#define SDR0_MFR_E1TxFH 0x00000400 /* force parity error EMAC1 Tx
- FIFO bits 64:127 */
-#define SDR0_MFR_E1RxFL 0x00000200 /* force parity error EMAC1 Rx
- FIFO bits 0:63 */
-#define SDR0_MFR_E1RxFH 0x00000100 /* force parity error EMAC1 Rx
- FIFO bits 64:127 */
-#define SDR0_MFR_E2TxFL 0x00000080 /* force parity error EMAC2 Tx
- FIFO bits 0:63 */
-#define SDR0_MFR_E2TxFH 0x00000040 /* force parity error EMAC2 Tx
- FIFO bits 64:127 */
-#define SDR0_MFR_E2RxFL 0x00000020 /* force parity error EMAC2 Rx
- FIFO bits 0:63 */
-#define SDR0_MFR_E2RxFH 0x00000010 /* force parity error EMAC2 Rx
- FIFO bits 64:127 */
-#define SDR0_MFR_E3TxFL 0x00000008 /* force parity error EMAC3 Tx
- FIFO bits 0:63 */
-#define SDR0_MFR_E3TxFH 0x00000004 /* force parity error EMAC3 Tx
- FIFO bits 64:127 */
-#define SDR0_MFR_E3RxFL 0x00000002 /* force parity error EMAC3 Rx
- FIFO bits 0:63 */
-#define SDR0_MFR_E3RxFH 0x00000001 /* force parity error EMAC3 Rx
- FIFO bits 64:127 */
-
-/* EMACx TX Status Register (SDR0_EMACxTXST)*/
-#define SDR0_EMAC0TXST 0x4400
-#define SDR0_EMAC1TXST 0x4401
-#define SDR0_EMAC2TXST 0x4402
-#define SDR0_EMAC3TXST 0x4403
-
-#define SDR0_EMACxTXST_FUR 0x02000000 /*TX FIFO underrun */
-#define SDR0_EMACxTXST_BC 0x01000000 /*broadcase address */
-#define SDR0_EMACxTXST_MC 0x00800000 /*multicast address */
-#define SDR0_EMACxTXST_UC 0x00400000 /*unicast address */
-#define SDR0_EMACxTXST_FP 0x00200000 /*frame paused by control packet */
-#define SDR0_EMACxTXST_BFCS 0x00100000 /*bad FCS in the transmitted frame */
-#define SDR0_EMACxTXST_CPF 0x00080000 /*TX control pause frame */
-#define SDR0_EMACxTXST_CF 0x00040000 /*TX control frame */
-#define SDR0_EMACxTXST_MSIZ 0x00020000 /* 1024-maxsize bytes transmitted */
-#define SDR0_EMACxTXST_1023 0x00010000 /*512-1023 bytes transmitted */
-#define SDR0_EMACxTXST_511 0x00008000 /*256-511 bytes transmitted */
-#define SDR0_EMACxTXST_255 0x00004000 /*128-255 bytes transmitted */
-#define SDR0_EMACxTXST_127 0x00002000 /*65-127 bytes transmitted */
-#define SDR0_EMACxTXST_64 0x00001000 /*64 bytes transmitted */
-#define SDR0_EMACxTXST_SQE 0x00000800 /*SQE indication */
-#define SDR0_EMACxTXST_LOC 0x00000400 /*loss of carrier sense */
-#define SDR0_EMACxTXST_IERR 0x00000080 /*EMAC internal error */
-#define SDR0_EMACxTXST_EDF 0x00000040 /*excessive deferral */
-#define SDR0_EMACxTXST_ECOL 0x00000020 /*excessive collisions */
-#define SDR0_EMACxTXST_LCOL 0x00000010 /*late collision */
-#define SDR0_EMACxTXST_DFFR 0x00000008 /*deferred frame */
-#define SDR0_EMACxTXST_MCOL 0x00000004 /*multiple collision frame */
-#define SDR0_EMACxTXST_SCOL 0x00000002 /*single collision frame */
-#define SDR0_EMACxTXST_TXOK 0x00000001 /*transmit OK */
-
-/* EMACx RX Status Register (SDR0_EMACxRXST)*/
-#define SDR0_EMAC0RXST 0x4404
-#define SDR0_EMAC1RXST 0x4405
-#define SDR0_EMAC2RXST 0x4406
-#define SDR0_EMAC3RXST 0x4407
-
-#define SDR0_EMACxRXST_FOR 0x20000000 /* RX FIFO overrun */
-#define SDR0_EMACxRXST_BC 0x10000000 /* broadcast address */
-#define SDR0_EMACxRXST_MC 0x08000000 /* multicast address */
-#define SDR0_EMACxRXST_UC 0x04000000 /* unicast address */
-#define SDR0_EMACxRXST_UPR_MASK 0x03800000 /* user priority field */
-#define SDR0_EMACxRXST_UPR_ENCODE(n) ((((unsigned long)(n))&0x07)<<23)
-#define SDR0_EMACxRXST_VLAN 0x00400000 /* RX VLAN tagged frame */
-#define SDR0_EMACxRXST_LOOP 0x00200000 /* received in loop-back mode */
-#define SDR0_EMACxRXST_UOP 0x00100000 /* RX unsupported opcode */
-#define SDR0_EMACxRXST_CPF 0x00080000 /* RX control pause frame */
-#define SDR0_EMACxRXST_CF 0x00040000 /* RX control frame*/
-#define SDR0_EMACxRXST_MSIZ 0x00020000 /* 1024-MaxSize bytes recieved*/
-#define SDR0_EMACxRXST_1023 0x00010000 /* 512-1023 bytes received */
-#define SDR0_EMACxRXST_511 0x00008000 /* 128-511 bytes received */
-#define SDR0_EMACxRXST_255 0x00004000 /* 128-255 bytes received */
-#define SDR0_EMACxRXST_127 0x00002000 /* 65-127 bytes received */
-#define SDR0_EMACxRXST_64 0x00001000 /* 64 bytes received */
-#define SDR0_EMACxRXST_RUNT 0x00000800 /* runt frame */
-#define SDR0_EMACxRXST_SEVT 0x00000400 /* short event */
-#define SDR0_EMACxRXST_AERR 0x00000200 /* alignment error */
-#define SDR0_EMACxRXST_SERR 0x00000100 /* received with symbol error */
-#define SDR0_EMACxRXST_BURST 0x00000040 /* received burst */
-#define SDR0_EMACxRXST_F2L 0x00000020 /* frame is to long */
-#define SDR0_EMACxRXST_OERR 0x00000010 /* out of range length error */
-#define SDR0_EMACxRXST_IERR 0x00000008 /* in range length error */
-#define SDR0_EMACxRXST_LOST 0x00000004 /* frame lost due to internal
- EMAC receive error */
-#define SDR0_EMACxRXST_BFCS 0x00000002 /* bad FCS in the recieved frame */
-#define SDR0_EMACxRXST_RXOK 0x00000001 /* Recieve OK */
-
-/* EMACx TX Status Register (SDR0_EMACxREJCNT)*/
-#define SDR0_EMAC0REJCNT 0x4408
-#define SDR0_EMAC1REJCNT 0x4409
-#define SDR0_EMAC2REJCNT 0x440A
-#define SDR0_EMAC3REJCNT 0x440B
-
-#define SDR0_DDR0 0x00E1
-#define SDR0_DDR0_DPLLRST 0x80000000
-#define SDR0_DDR0_DDRM_MASK 0x60000000
-#define SDR0_DDR0_DDRM_DDR1 0x20000000
-#define SDR0_DDR0_DDRM_DDR2 0x40000000
-#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
-#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
-#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
-#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
-
-#define AHB_TOP 0xA4
-#define AHB_BOT 0xA5
-#define SDR0_AHB_CFG 0x370
-#define SDR0_USB2HOST_CFG 0x371
-#endif /* CONFIG_460EX || CONFIG_460GT */
-
-#define SDR0_SDCS_SDD (0x80000000 >> 31)
-
-#if defined(CONFIG_440GP)
-#define CPC0_STRP1_PAE_MASK (0x80000000 >> 11)
-#define CPC0_STRP1_PISE_MASK (0x80000000 >> 13)
-#endif /* defined(CONFIG_440GP) */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
-#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
-#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
-#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
-#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
-
-#define SDR0_UARTX_UXICS_MASK 0xF0000000
-#define SDR0_UARTX_UXICS_PLB 0x20000000
-#define SDR0_UARTX_UXEC_MASK 0x00800000
-#define SDR0_UARTX_UXEC_INT 0x00000000
-#define SDR0_UARTX_UXEC_EXT 0x00800000
-#define SDR0_UARTX_UXDTE_MASK 0x00400000
-#define SDR0_UARTX_UXDTE_DISABLE 0x00000000
-#define SDR0_UARTX_UXDTE_ENABLE 0x00400000
-#define SDR0_UARTX_UXDRE_MASK 0x00200000
-#define SDR0_UARTX_UXDRE_DISABLE 0x00000000
-#define SDR0_UARTX_UXDRE_ENABLE 0x00200000
-#define SDR0_UARTX_UXDC_MASK 0x00100000
-#define SDR0_UARTX_UXDC_NOTCLEARED 0x00000000
-#define SDR0_UARTX_UXDC_CLEARED 0x00100000
-#define SDR0_UARTX_UXDIV_MASK 0x000000FF
-#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1)
-
-#define SDR0_CPU440_EARV_MASK 0x30000000
-#define SDR0_CPU440_EARV_EBC 0x10000000
-#define SDR0_CPU440_EARV_PCI 0x20000000
-#define SDR0_CPU440_EARV_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
-#define SDR0_CPU440_EARV_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
-#define SDR0_CPU440_NTO1_MASK 0x00000002
-#define SDR0_CPU440_NTO1_NTOP 0x00000000
-#define SDR0_CPU440_NTO1_NTO1 0x00000002
-#define SDR0_CPU440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
-#define SDR0_CPU440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
-
-#define SDR0_XCR_PAE_MASK 0x80000000
-#define SDR0_XCR_PAE_DISABLE 0x00000000
-#define SDR0_XCR_PAE_ENABLE 0x80000000
-#define SDR0_XCR_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
-#define SDR0_XCR_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
-#define SDR0_XCR_PHCE_MASK 0x40000000
-#define SDR0_XCR_PHCE_DISABLE 0x00000000
-#define SDR0_XCR_PHCE_ENABLE 0x40000000
-#define SDR0_XCR_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define SDR0_XCR_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define SDR0_XCR_PISE_MASK 0x20000000
-#define SDR0_XCR_PISE_DISABLE 0x00000000
-#define SDR0_XCR_PISE_ENABLE 0x20000000
-#define SDR0_XCR_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define SDR0_XCR_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define SDR0_XCR_PCWE_MASK 0x10000000
-#define SDR0_XCR_PCWE_DISABLE 0x00000000
-#define SDR0_XCR_PCWE_ENABLE 0x10000000
-#define SDR0_XCR_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
-#define SDR0_XCR_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
-#define SDR0_XCR_PPIM_MASK 0x0F000000
-#define SDR0_XCR_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
-#define SDR0_XCR_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
-#define SDR0_XCR_PR64E_MASK 0x00800000
-#define SDR0_XCR_PR64E_DISABLE 0x00000000
-#define SDR0_XCR_PR64E_ENABLE 0x00800000
-#define SDR0_XCR_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
-#define SDR0_XCR_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
-#define SDR0_XCR_PXFS_MASK 0x00600000
-#define SDR0_XCR_PXFS_HIGH 0x00000000
-#define SDR0_XCR_PXFS_MED 0x00200000
-#define SDR0_XCR_PXFS_LOW 0x00400000
-#define SDR0_XCR_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
-#define SDR0_XCR_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
-#define SDR0_XCR_PDM_MASK 0x00000040
-#define SDR0_XCR_PDM_MULTIPOINT 0x00000000
-#define SDR0_XCR_PDM_P2P 0x00000040
-#define SDR0_XCR_PDM_ENCODE(n) ((((unsigned long)(n))&0x01)<<19)
-#define SDR0_XCR_PDM_DECODE(n) ((((unsigned long)(n))>>19)&0x01)
-
-#define SDR0_PFC0_UART1_DSR_CTS_EN_MASK 0x00030000
-#define SDR0_PFC0_GEIE_MASK 0x00003E00
-#define SDR0_PFC0_GEIE_TRE 0x00003E00
-#define SDR0_PFC0_GEIE_NOTRE 0x00000000
-#define SDR0_PFC0_TRE_MASK 0x00000100
-#define SDR0_PFC0_TRE_DISABLE 0x00000000
-#define SDR0_PFC0_TRE_ENABLE 0x00000100
-#define SDR0_PFC0_TRE_ENCODE(n) ((((unsigned long)(n))&0x01)<<8)
-#define SDR0_PFC0_TRE_DECODE(n) ((((unsigned long)(n))>>8)&0x01)
-
-#define SDR0_PFC1_UART1_DSR_CTS_MASK 0x02000000
-#define SDR0_PFC1_EPS_MASK 0x01C00000
-#define SDR0_PFC1_EPS_GROUP0 0x00000000
-#define SDR0_PFC1_EPS_GROUP1 0x00400000
-#define SDR0_PFC1_EPS_GROUP2 0x00800000
-#define SDR0_PFC1_EPS_GROUP3 0x00C00000
-#define SDR0_PFC1_EPS_GROUP4 0x01000000
-#define SDR0_PFC1_EPS_GROUP5 0x01400000
-#define SDR0_PFC1_EPS_GROUP6 0x01800000
-#define SDR0_PFC1_EPS_GROUP7 0x01C00000
-#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
-#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
-#define SDR0_PFC1_RMII_MASK 0x00200000
-#define SDR0_PFC1_RMII_100MBIT 0x00000000
-#define SDR0_PFC1_RMII_10MBIT 0x00200000
-#define SDR0_PFC1_RMII_ENCODE(n) ((((unsigned long)(n))&0x01)<<21)
-#define SDR0_PFC1_RMII_DECODE(n) ((((unsigned long)(n))>>21)&0x01)
-#define SDR0_PFC1_CTEMS_MASK 0x00100000
-#define SDR0_PFC1_CTEMS_EMS 0x00000000
-#define SDR0_PFC1_CTEMS_CPUTRACE 0x00100000
-
-#define SDR0_MFR_TAH0_MASK 0x80000000
-#define SDR0_MFR_TAH0_ENABLE 0x00000000
-#define SDR0_MFR_TAH0_DISABLE 0x80000000
-#define SDR0_MFR_TAH1_MASK 0x40000000
-#define SDR0_MFR_TAH1_ENABLE 0x00000000
-#define SDR0_MFR_TAH1_DISABLE 0x40000000
-#define SDR0_MFR_PCM_MASK 0x20000000
-#define SDR0_MFR_PCM_PPC440GX 0x00000000
-#define SDR0_MFR_PCM_PPC440GP 0x20000000
-#define SDR0_MFR_ECS_MASK 0x10000000
-#define SDR0_MFR_ECS_INTERNAL 0x10000000
-
-#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
-#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs*/
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */
-#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3
- 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
-#endif
-
-
-#if defined(CONFIG_440EPX)
-#define CPM0_ER 0x000000B0
-#define CPM1_ER 0x000000F0
-#define PLB4A0_ACR 0x00000081
-#define PLB4A1_ACR 0x00000089
-#define PLB3A0_ACR 0x00000077
-#define OPB2PLB40_BCTRL 0x00000350
-#define P4P3BO0_CFG 0x00000026
-#define SPI0_MODE 0xEF600090 /* SPI Mode Regsgiter */
-
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
-#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
-#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29)
-#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07)
-#endif
-
-#define SDR0_MFR_ECS_MASK 0x10000000
-#define SDR0_MFR_ECS_INTERNAL 0x10000000
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_SRST0 0x200
-#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
-#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
-#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
-#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
-#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
- transmitter 0 */
-#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
- transmitter 1 */
-#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
-#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
-#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
-#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
-#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
-#define SDR0_SRST0_PCI 0x00100000 /* PCI */
-#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
-#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
-#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
-#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
-#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
-#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
-#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
-#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
-#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
-#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
-#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
-#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
-#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
-#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
-#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
-#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
-#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
-#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/
- transmitter 2 */
-#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/
- transmitter 3 */
-
-#define SDR0_SRST1 0x201
-#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
-#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
-#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
-#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
-#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
-#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
-#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4
- USB 2.0 Host */
-#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to
- USB 2.0 Host */
-#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to
- USB 2.0 Host */
-#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
-#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2*/
-#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
-#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
-#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
-#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
-#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
-#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
-#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
-#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
-#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
-
-#define SDR0_EMAC0RXST 0x00004301 /* */
-#define SDR0_EMAC0TXST 0x00004302 /* */
-#define SDR0_CRYP0 0x00004500
-#define SDR0_EBC0 0x00000100
-#define SDR0_SDSTP2 0x00004001
-#define SDR0_SDSTP3 0x00004001
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define SDR0_SRST0 SDR0_SRST /* for compatability reasons */
-#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
-#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
-#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
-#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
-#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
- transmitter 0 */
-#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
- transmitter 1 */
-#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
-#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */
-#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */
-#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
-#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
-#define SDR0_SRST0_PCI 0x00100000 /* PCI */
-#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
-#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */
-#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/
-#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/
-#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/
-#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/
-#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/
-#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/
-#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/
- transmitter 2 */
-#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
-#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
-#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */
-#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/
- transmitter 3 */
-#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */
-
-#define SDR0_SRST1 0x201
-#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */
-#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */
-#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */
-#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */
-#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */
-#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access
- controller 0 */
-#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access
- controller 1 */
-#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access
- controller 2 */
-#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access
- controller 3 */
-#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */
-#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */
-#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */
-#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */
-#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */
-#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */
-#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and
- serdes */
-#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */
-#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */
-#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */
-#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */
-#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */
-#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */
-#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */
-#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */
-#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */
-#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
-#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */
-#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */
-#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */
-#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */
-#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
-#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
-
-#else
-
-#define SDR0_SRST_BGO 0x80000000
-#define SDR0_SRST_PLB 0x40000000
-#define SDR0_SRST_EBC 0x20000000
-#define SDR0_SRST_OPB 0x10000000
-#define SDR0_SRST_UART0 0x08000000
-#define SDR0_SRST_UART1 0x04000000
-#define SDR0_SRST_IIC0 0x02000000
-#define SDR0_SRST_IIC1 0x01000000
-#define SDR0_SRST_GPIO 0x00800000
-#define SDR0_SRST_GPT 0x00400000
-#define SDR0_SRST_DMC 0x00200000
-#define SDR0_SRST_PCI 0x00100000
-#define SDR0_SRST_EMAC0 0x00080000
-#define SDR0_SRST_EMAC1 0x00040000
-#define SDR0_SRST_CPM 0x00020000
-#define SDR0_SRST_IMU 0x00010000
-#define SDR0_SRST_UIC01 0x00008000
-#define SDR0_SRST_UICB2 0x00004000
-#define SDR0_SRST_SRAM 0x00002000
-#define SDR0_SRST_EBM 0x00001000
-#define SDR0_SRST_BGI 0x00000800
-#define SDR0_SRST_DMA 0x00000400
-#define SDR0_SRST_DMAC 0x00000200
-#define SDR0_SRST_MAL 0x00000100
-#define SDR0_SRST_ZMII 0x00000080
-#define SDR0_SRST_GPTR 0x00000040
-#define SDR0_SRST_PPM 0x00000020
-#define SDR0_SRST_EMAC2 0x00000010
-#define SDR0_SRST_EMAC3 0x00000008
-#define SDR0_SRST_RGMII 0x00000001
-
-#endif
-
-/*-----------------------------------------------------------------------------+
-| Clocking
-+-----------------------------------------------------------------------------*/
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
-#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
-#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
-#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
-#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
-#elif !defined (CONFIG_440GX) && \
- !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
-#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
-#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
-#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
-#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
-#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
-#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
-#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
-#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
-#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
-#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
-#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
-#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
-#else /* !CONFIG_440GX or CONFIG_440EP or CONFIG_440GR */
-#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
-#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
-#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
-#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
-#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
-#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
-
-#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
-#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
-#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
-
-#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
-#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
-#define PRADV_MASK 0x07000000 /* Primary Divisor A */
-#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
-#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
-
-#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
-#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
-#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
-#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
-
-/* Strap 1 Register */
-#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
-#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
-#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
-#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
-#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
-#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
-#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
-#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
-#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
-#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
-#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
-#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
-#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
-#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
-#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
-#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
-#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
-#define CPR0_SPCID_SPCIDV0_DIV1 0x01000000
-#define CPR0_SPCID_SPCIDV0_DIV2 0x02000000
-#define CPR0_SPCID_SPCIDV0_DIV3 0x03000000
-#define CPR0_SPCID_SPCIDV0_DIV4 0x00000000
-#define CPR0_PERD_PERDV0_MASK 0x07000000
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define CPR0_ICFG_RLI_MASK 0x80000000
-
-#define CPR0_PLLC_RST 0x80000000
-#define CPR0_PLLC_ENG 0x40000000
-#endif
-
-/*-----------------------------------------------------------------------------
-| PCI Internal Registers et. al. (accessed via plb)
-+----------------------------------------------------------------------------*/
-#define PCIL0_CFGADR (CONFIG_SYS_PCI_BASE + 0x0ec00000)
-#define PCIL0_CFGDATA (CONFIG_SYS_PCI_BASE + 0x0ec00004)
-#define PCIL0_CFGBASE (CONFIG_SYS_PCI_BASE + 0x0ec80000)
-#define PCIL0_IOBASE (CONFIG_SYS_PCI_BASE + 0x08000000)
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-/* PCI Local Configuration Registers
- --------------------------------- */
-#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real =>
- 0x0EF400000 */
-
-/* PCI Master Local Configuration Registers */
-#define PCIL0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
-#define PCIL0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
-#define PCIL0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
-#define PCIL0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
-#define PCIL0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
-#define PCIL0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
-#define PCIL0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
-#define PCIL0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
-#define PCIL0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
-#define PCIL0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
-#define PCIL0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
-#define PCIL0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
-
-/* PCI Target Local Configuration Registers */
-#define PCIL0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/
- Attribute */
-#define PCIL0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
-#define PCIL0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/
- Attribute */
-#define PCIL0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
-
-#else
+#define SDR0_SDCS_SDD (0x80000000 >> 31)
+/* todo: move this code from macro offsets to struct */
#define PCIL0_VENDID (PCIL0_CFGBASE + PCI_VENDOR_ID )
#define PCIL0_DEVID (PCIL0_CFGBASE + PCI_DEVICE_ID )
#define PCIL0_CMD (PCIL0_CFGBASE + PCI_COMMAND )
@@ -1793,37 +183,10 @@
#define PCIL0_RES2 (PCIL0_CFGBASE + 0x0038 )
#define PCIL0_INTLN (PCIL0_CFGBASE + PCI_INTERRUPT_LINE )
#define PCIL0_INTPN (PCIL0_CFGBASE + PCI_INTERRUPT_PIN )
-#define SDR0_EMACxTXST_FUR 0x02000000 /* TX FIFO underrun */
-#define SDR0_EMACxTXST_BC 0x01000000 /* broadcase address */
-#define SDR0_EMACxTXST_MC 0x00800000 /* multicast address */
-#define SDR0_EMACxTXST_UC 0x00400000 /* unicast address */
-#define SDR0_EMACxTXST_FP 0x00200000 /* frame paused by control packet */
-#define SDR0_EMACxTXST_BFCS 0x00100000 /* bad FCS in the transmitted frame*/
-#define SDR0_EMACxTXST_CPF 0x00080000 /* TX control pause frame */
-#define SDR0_EMACxTXST_CF 0x00040000 /* TX control frame */
-#define SDR0_EMACxTXST_MSIZ 0x00020000 /* 1024-maxsize bytes transmitted */
-#define SDR0_EMACxTXST_1023 0x00010000 /* 512-1023 bytes transmitted */
-#define SDR0_EMACxTXST_511 0x00008000 /* 256-511 bytes transmitted */
-#define SDR0_EMACxTXST_255 0x00004000 /* 128-255 bytes transmitted */
-#define SDR0_EMACxTXST_127 0x00002000 /* 65-127 bytes transmitted */
-#define SDR0_EMACxTXST_64 0x00001000 /* 64 bytes transmitted */
-#define SDR0_EMACxTXST_SQE 0x00000800 /* SQE indication */
-#define SDR0_EMACxTXST_LOC 0x00000400 /* loss of carrier sense */
-#define SDR0_EMACxTXST_IERR 0x00000080 /* EMAC internal error */
-#define SDR0_EMACxTXST_EDF 0x00000040 /* excessive deferral */
-#define SDR0_EMACxTXST_ECOL 0x00000020 /* excessive collisions */
-#define SDR0_EMACxTXST_LCOL 0x00000010 /* late collision */
-#define SDR0_EMACxTXST_DFFR 0x00000008 /* deferred frame */
-#define SDR0_EMACxTXST_MCOL 0x00000004 /* multiple collision frame */
-#define SDR0_EMACxTXST_SCOL 0x00000002 /* single collision frame */
-#define SDR0_EMACxTXST_TXOK 0x00000001 /* transmit OK */
#define PCIL0_MINGNT (PCIL0_CFGBASE + PCI_MIN_GNT )
#define PCIL0_MAXLTNCY (PCIL0_CFGBASE + PCI_MAX_LAT )
-#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
-#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
-
#define PCIL0_POM0LAL (PCIL0_CFGBASE + 0x0068)
#define PCIL0_POM0LAH (PCIL0_CFGBASE + 0x006c)
#define PCIL0_POM0SA (PCIL0_CFGBASE + 0x0070)
@@ -1848,111 +211,44 @@
#define PCIL0_STS (PCIL0_CFGBASE + 0x00e0)
-#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-/* USB2.0 Device */
-#define USB2D0_BASE CONFIG_SYS_USB2D0_BASE
-
-#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
-
-#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for
- Endpoint 0 plus IN Endpoints 1 to 3 */
-#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management
- register */
-#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address
- register */
-#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable
- register for USB2D0_INTRIN */
-#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for
- OUT Endpoints 1 to 3 */
-#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable
- register for USB2D0_INTRUSB */
-#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for
- common USB interrupts */
-#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable
- register for IntrOut */
-#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0
- test modes */
-#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for
- selecting the Endpoint status/control registers */
-#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
-#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status
- register for Endpoint 0. (Index register set to select Endpoint 0) */
-#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status
- register for IN Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet
- size for IN Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status
- register for OUT Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet
- size for OUT Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received
- bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
-#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in
- OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
-#endif
-
-/******************************************************************************
+/*
* GPIO macro register defines
- ******************************************************************************/
-#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460SX)
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000700)
-
-#define GPIO0_OR (GPIO0_BASE+0x0)
-#define GPIO0_TCR (GPIO0_BASE+0x4)
-#define GPIO0_ODR (GPIO0_BASE+0x18)
-#define GPIO0_IR (GPIO0_BASE+0x1C)
-#endif /* CONFIG_440GP */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000B00)
-#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000C00)
-
-#define GPIO0_OR (GPIO0_BASE+0x0)
-#define GPIO0_TCR (GPIO0_BASE+0x4)
-#define GPIO0_OSRL (GPIO0_BASE+0x8)
-#define GPIO0_OSRH (GPIO0_BASE+0xC)
-#define GPIO0_TSRL (GPIO0_BASE+0x10)
-#define GPIO0_TSRH (GPIO0_BASE+0x14)
-#define GPIO0_ODR (GPIO0_BASE+0x18)
-#define GPIO0_IR (GPIO0_BASE+0x1C)
-#define GPIO0_RR1 (GPIO0_BASE+0x20)
-#define GPIO0_RR2 (GPIO0_BASE+0x24)
-#define GPIO0_RR3 (GPIO0_BASE+0x28)
-#define GPIO0_ISR1L (GPIO0_BASE+0x30)
-#define GPIO0_ISR1H (GPIO0_BASE+0x34)
-#define GPIO0_ISR2L (GPIO0_BASE+0x38)
-#define GPIO0_ISR2H (GPIO0_BASE+0x3C)
-#define GPIO0_ISR3L (GPIO0_BASE+0x40)
-#define GPIO0_ISR3H (GPIO0_BASE+0x44)
-
-#define GPIO1_OR (GPIO1_BASE+0x0)
-#define GPIO1_TCR (GPIO1_BASE+0x4)
-#define GPIO1_OSRL (GPIO1_BASE+0x8)
-#define GPIO1_OSRH (GPIO1_BASE+0xC)
-#define GPIO1_TSRL (GPIO1_BASE+0x10)
-#define GPIO1_TSRH (GPIO1_BASE+0x14)
-#define GPIO1_ODR (GPIO1_BASE+0x18)
-#define GPIO1_IR (GPIO1_BASE+0x1C)
-#define GPIO1_RR1 (GPIO1_BASE+0x20)
-#define GPIO1_RR2 (GPIO1_BASE+0x24)
-#define GPIO1_RR3 (GPIO1_BASE+0x28)
-#define GPIO1_ISR1L (GPIO1_BASE+0x30)
-#define GPIO1_ISR1H (GPIO1_BASE+0x34)
-#define GPIO1_ISR2L (GPIO1_BASE+0x38)
-#define GPIO1_ISR2H (GPIO1_BASE+0x3C)
-#define GPIO1_ISR3L (GPIO1_BASE+0x40)
-#define GPIO1_ISR3H (GPIO1_BASE+0x44)
-#endif
-
-#ifndef __ASSEMBLY__
-
-#endif /* _ASMLANGUAGE */
+ */
+/* todo: move to ppc4xx.h and merge with gpio.h header */
+#define GPIO0_OR (GPIO0_BASE + 0x0)
+#define GPIO0_TCR (GPIO0_BASE + 0x4)
+#define GPIO0_OSRL (GPIO0_BASE + 0x8)
+#define GPIO0_OSRH (GPIO0_BASE + 0xC)
+#define GPIO0_TSRL (GPIO0_BASE + 0x10)
+#define GPIO0_TSRH (GPIO0_BASE + 0x14)
+#define GPIO0_ODR (GPIO0_BASE + 0x18)
+#define GPIO0_IR (GPIO0_BASE + 0x1C)
+#define GPIO0_RR1 (GPIO0_BASE + 0x20)
+#define GPIO0_RR2 (GPIO0_BASE + 0x24)
+#define GPIO0_RR3 (GPIO0_BASE + 0x28)
+#define GPIO0_ISR1L (GPIO0_BASE + 0x30)
+#define GPIO0_ISR1H (GPIO0_BASE + 0x34)
+#define GPIO0_ISR2L (GPIO0_BASE + 0x38)
+#define GPIO0_ISR2H (GPIO0_BASE + 0x3C)
+#define GPIO0_ISR3L (GPIO0_BASE + 0x40)
+#define GPIO0_ISR3H (GPIO0_BASE + 0x44)
+
+#define GPIO1_OR (GPIO1_BASE + 0x0)
+#define GPIO1_TCR (GPIO1_BASE + 0x4)
+#define GPIO1_OSRL (GPIO1_BASE + 0x8)
+#define GPIO1_OSRH (GPIO1_BASE + 0xC)
+#define GPIO1_TSRL (GPIO1_BASE + 0x10)
+#define GPIO1_TSRH (GPIO1_BASE + 0x14)
+#define GPIO1_ODR (GPIO1_BASE + 0x18)
+#define GPIO1_IR (GPIO1_BASE + 0x1C)
+#define GPIO1_RR1 (GPIO1_BASE + 0x20)
+#define GPIO1_RR2 (GPIO1_BASE + 0x24)
+#define GPIO1_RR3 (GPIO1_BASE + 0x28)
+#define GPIO1_ISR1L (GPIO1_BASE + 0x30)
+#define GPIO1_ISR1H (GPIO1_BASE + 0x34)
+#define GPIO1_ISR2L (GPIO1_BASE + 0x38)
+#define GPIO1_ISR2H (GPIO1_BASE + 0x3C)
+#define GPIO1_ISR3L (GPIO1_BASE + 0x40)
+#define GPIO1_ISR3H (GPIO1_BASE + 0x44)
#endif /* __PPC440_H__ */
diff --git a/arch/powerpc/include/asm/ppc440ep_gr.h b/arch/powerpc/include/asm/ppc440ep_gr.h
new file mode 100644
index 0000000..2535787
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440ep_gr.h
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC440EP_GR_H_
+#define _PPC440EP_GR_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
+
+#define CONFIG_NAND_NDFC
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+/*
+ * Some SoC specific registers (not common for all 440 SoC's)
+ */
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000B00)
+#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000C00)
+
+#define SDR0_PCI0 0x0300
+#define SDR0_SDSTP2 0x4001
+#define SDR0_SDSTP3 0x4003
+
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
+#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
+
+/* Pin Function Control Register 1 */
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold
+ Req Selection */
+#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
+#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
+#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
+ Selection */
+#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
+#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
+#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
+ Selection */
+#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En.
+ Selected */
+#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
+#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
+ Selection */
+#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
+ Disable */
+#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
+ Enable */
+#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor Enable
+ Selection */
+#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor
+ Enable */
+#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor
+ Enable */
+#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
+ Gated In */
+
+/* USB Control Register */
+#define SDR0_USB0_USB_DEVSEL_MASK 0x00000002 /* USB Device Selection */
+#define SDR0_USB0_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
+#define SDR0_USB0_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
+#define SDR0_USB0_LEEN_MASK 0x00000001 /* Little Endian selection */
+#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
+#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((u32)(n)) & 0x3) << 24)
+#define SDR0_MFR_ZM_DECODE(n) ((((u32)(n)) << 24) & 0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Ena. on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
+
+#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
+
+#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
+
+#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+
+#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
+#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
+#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
+
+#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
+#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
+#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
+#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
+
+#define SDR0_SRST_DMC 0x00200000
+
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_ICFG_ICS_MASK 0x00000007
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_SPCID_SPCIDV0_DIV1 0x01000000
+#define CPR0_SPCID_SPCIDV0_DIV2 0x02000000
+#define CPR0_SPCID_SPCIDV0_DIV3 0x03000000
+#define CPR0_SPCID_SPCIDV0_DIV4 0x00000000
+#define CPR0_PERD_PERDV0_MASK 0x07000000
+
+#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real =>
+ 0x0EF400000 */
+
+/* PCI Master Local Configuration Registers */
+#define PCIL0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
+#define PCIL0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
+#define PCIL0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
+#define PCIL0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
+#define PCIL0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
+#define PCIL0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
+#define PCIL0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
+#define PCIL0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
+#define PCIL0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
+#define PCIL0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
+#define PCIL0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
+#define PCIL0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
+
+/* PCI Target Local Configuration Registers */
+#define PCIL0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/
+ Attribute */
+#define PCIL0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
+#define PCIL0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/
+ Attribute */
+#define PCIL0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
+
+#endif /* _PPC440EP_GR_H_ */
diff --git a/arch/powerpc/include/asm/ppc440epx_grx.h b/arch/powerpc/include/asm/ppc440epx_grx.h
new file mode 100644
index 0000000..dfaa609
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440epx_grx.h
@@ -0,0 +1,460 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC440EPX_GRX_H_
+#define _PPC440EPX_GRX_H_
+
+#define CONFIG_SDRAM_PPC4xx_DENALI_DDR2 /* Denali DDR(2) controller */
+
+#define CONFIG_NAND_NDFC
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+/*
+ * Some SoC specific registers (not common for all 440 SoC's)
+ */
+
+/* Memory mapped registers */
+#define SPI0_MODE 0xef600090
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000B00)
+#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000C00)
+
+/* DCR */
+#define CPM0_ER 0x00b0
+#define CPM1_ER 0x00f0
+#define PLB3A0_ACR 0x0077
+#define PLB4A0_ACR 0x0081
+#define PLB4A1_ACR 0x0089
+#define OPB2PLB40_BCTRL 0x0350
+#define P4P3BO0_CFG 0x0026
+
+/* SDR */
+#define SDR0_DDRCFG 0x00e0
+#define SDR0_PCI0 0x0300
+#define SDR0_SDSTP2 0x4001
+#define SDR0_SDSTP3 0x4003
+#define SDR0_EMAC0RXST 0x4301
+#define SDR0_EMAC0TXST 0x4302
+#define SDR0_CRYP0 0x4500
+
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
+#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
+
+/* Pin Function Control Register 1 */
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select
+ EMAC 0 */
+#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII
+ bridge */
+#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII
+ bridge */
+#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII
+ bridge */
+#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII
+ bridge */
+#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII
+ bridge */
+#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII
+ bridge */
+#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII
+ bridge */
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold
+ Req Selection */
+#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
+#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
+#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
+ Selection */
+#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
+#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
+#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
+ Selection */
+#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En.
+ Selected */
+#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
+#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
+ Selection */
+#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
+ Disable */
+#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
+ Enable */
+#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor Enable
+ Selection */
+#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor
+ Enable */
+#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor
+ Enable */
+#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
+ Gated In */
+
+#define SDR0_PFC2_SELECT_MASK 0xe0000000 /* Ethernet Pin select EMAC1 */
+#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_4 0xa0000000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_5 0xc0000000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
+
+#define SDR0_USB2D0CR 0x0320
+#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC
+ Master Selection */
+#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection*/
+#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
+
+#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface
+ Selection */
+#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
+#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
+
+#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
+#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
+#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+
+/* USB2 Host Control Register */
+#define SDR0_USB2H0CR 0x0340
+#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface*/
+#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
+#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
+#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length
+ Adjustment */
+/* USB2PHY0 Control Register */
+#define SDR0_USB2PHY0CR 0x4103
+#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000
+
+ /* PHY UTMI interface connection */
+#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
+#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
+
+#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
+#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
+#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
+
+/* VBus detect (Device mode only) */
+#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000
+/* Pull-up resistance on D+ is disabled */
+#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000
+/* Pull-up resistance on D+ is enabled */
+#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000
+
+/* PHY UTMI data width and clock select */
+#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000
+#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
+#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
+
+#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
+#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
+/* Loop back enabled (only test purposes) */
+#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000
+
+/* Force XO block on during a suspend */
+#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000
+#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
+/* PHY XO block is powered-off when all ports are suspended */
+#define SDR0_USB2PHY0CR_XO_OFF 0x04000000
+
+#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only
+ for full-speed operation */
+
+#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock
+ source */
+#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal
+ 48M clock as a reference */
+#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO
+ block output as a reference */
+
+#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO
+ block*/
+#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external
+ clock */
+#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock
+ from a crystal */
+
+#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
+#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq
+ = 12 MHz */
+#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq
+ = 48 MHz */
+#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq
+ = 24 MHz */
+
+/* USB2.0 Device */
+/*
+ * todo: check if this can be completely removed, only used in
+ * cpu/ppc4xx/usbdev.c. And offsets are completely wrong. This could
+ * never have actually worked. Best probably is to remove this
+ * usbdev.c file completely (and these defines).
+ */
+#define USB2D0_BASE CONFIG_SYS_USB2D0_BASE
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for
+ Endpoint 0 plus IN Endpoints 1 to 3 */
+#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management
+ register */
+#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address
+ register */
+#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable
+ register for USB2D0_INTRIN */
+#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for
+ OUT Endpoints 1 to 3 */
+#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable
+ register for USB2D0_INTRUSB */
+#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for
+ common USB interrupts */
+#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable
+ register for IntrOut */
+#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0
+ test modes */
+#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for
+ selecting the Endpoint status/control registers */
+#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
+#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status
+ register for Endpoint 0. (Index register set to select Endpoint 0) */
+#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status
+ register for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet
+ size for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status
+ register for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet
+ size for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received
+ bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
+#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in
+ OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
+
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((u32)(n)) & 0x3) << 24)
+#define SDR0_MFR_ZM_DECODE(n) ((((u32)(n)) << 24) & 0x3)
+#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Ena. on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
+
+#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
+
+#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
+
+#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+
+#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
+#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
+#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
+
+#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
+#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
+#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
+#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
+
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
+ transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
+ transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
+#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
+#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
+#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
+#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
+#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
+#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
+#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
+#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
+#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/
+ transmitter 2 */
+#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/
+ transmitter 3 */
+
+#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
+#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
+#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
+#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
+#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4
+ USB 2.0 Host */
+#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to
+ USB 2.0 Host */
+#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to
+ USB 2.0 Host */
+#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
+#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2*/
+#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
+#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
+#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
+#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
+#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
+#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
+#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
+#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
+#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
+
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_ICFG_ICS_MASK 0x00000007
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_SPCID_SPCIDV0_DIV1 0x01000000
+#define CPR0_SPCID_SPCIDV0_DIV2 0x02000000
+#define CPR0_SPCID_SPCIDV0_DIV3 0x03000000
+#define CPR0_SPCID_SPCIDV0_DIV4 0x00000000
+#define CPR0_PERD_PERDV0_MASK 0x07000000
+
+#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real =>
+ 0x0EF400000 */
+
+/* PCI Master Local Configuration Registers */
+#define PCIL0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
+#define PCIL0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
+#define PCIL0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
+#define PCIL0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
+#define PCIL0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
+#define PCIL0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
+#define PCIL0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
+#define PCIL0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
+#define PCIL0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
+#define PCIL0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
+#define PCIL0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
+#define PCIL0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
+
+/* PCI Target Local Configuration Registers */
+#define PCIL0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/
+ Attribute */
+#define PCIL0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
+#define PCIL0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/
+ Attribute */
+#define PCIL0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
+
+/* 440EPx boot strap options */
+#define BOOT_STRAP_OPTION_A 0x00000000
+#define BOOT_STRAP_OPTION_B 0x00000001
+#define BOOT_STRAP_OPTION_D 0x00000003
+#define BOOT_STRAP_OPTION_E 0x00000004
+
+#endif /* _PPC440EPX_GRX_H_ */
diff --git a/arch/powerpc/include/asm/ppc440gp.h b/arch/powerpc/include/asm/ppc440gp.h
new file mode 100644
index 0000000..0c95e91
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440gp.h
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC440GP_H_
+#define _PPC440GP_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
+
+/*
+ * Some SoC specific registers (not common for all 440 SoC's)
+ */
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+#define SDR0_PCI0 0x0300
+
+#define CPC0_STRP1_PAE_MASK (0x80000000 >> 11)
+#define CPC0_STRP1_PISE_MASK (0x80000000 >> 13)
+
+#define CNTRL_DCR_BASE 0x0b0
+
+#define CPC0_SYS0 (CNTRL_DCR_BASE + 0x30) /* System configuration reg 0 */
+#define CPC0_SYS1 (CNTRL_DCR_BASE + 0x31) /* System configuration reg 1 */
+
+#define CPC0_STRP0 (CNTRL_DCR_BASE + 0x34) /* Power-on config reg 0 (RO) */
+#define CPC0_STRP1 (CNTRL_DCR_BASE + 0x35) /* Power-on config reg 1 (RO) */
+
+#define CPC0_GPIO (CNTRL_DCR_BASE + 0x38) /* GPIO config reg (440GP) */
+
+#define CPC0_CR0 (CNTRL_DCR_BASE + 0x3b) /* Control 0 register */
+#define CPC0_CR1 (CNTRL_DCR_BASE + 0x3a) /* Control 1 register */
+
+#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
+#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
+#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
+#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
+#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
+#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
+#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
+#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
+#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
+#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
+
+#endif /* _PPC440GP_H_ */
diff --git a/arch/powerpc/include/asm/ppc440gx.h b/arch/powerpc/include/asm/ppc440gx.h
new file mode 100644
index 0000000..157e467
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440gx.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC440GX_H_
+#define _PPC440GX_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
+
+/*
+ * Some SoC specific registers (not common for all 440 SoC's)
+ */
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+#define SDR0_PCI0 0x0300
+
+#define SDR0_SDSTP2 0x4001
+#define SDR0_SDSTP3 0x4003
+
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
+#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
+
+#define SDR0_PFC1_EPS_DECODE(n) ((((u32)(n)) >> 22) & 0x07)
+#define SDR0_PFC1_CTEMS_MASK (0x80000000 >> 11)
+#define SDR0_PFC1_CTEMS_EMS 0x00000000
+#define SDR0_PFC1_CTEMS_CPUTRACE (0x80000000 >> 11)
+
+#define SDR0_MFR_ECS_MASK 0x10000000
+
+#define SDR0_SRST_DMC 0x00200000
+
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
+#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
+
+#endif /* _PPC440GX_H_ */
diff --git a/arch/powerpc/include/asm/ppc440sp.h b/arch/powerpc/include/asm/ppc440sp.h
new file mode 100644
index 0000000..d4e62b6
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440sp.h
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC440SP_H_
+#define _PPC440SP_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+/*
+ * Some SoC specific registers (not common for all 440 SoC's)
+ */
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+#define SDR0_PCI0 0x0300
+#define SDR0_SDSTP2 0x0022
+#define SDR0_SDSTP3 0x0023
+
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
+#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
+
+#define SDR0_PFC1_EM_1000 (0x80000000 >> 10)
+
+#define SDR0_MFR_FIXD (0x80000000 >> 3) /* Workaround for PCI/DMA */
+
+#define SDR0_SRST0_DMC 0x00200000
+
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
+#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
+
+#endif /* _PPC440SP_H_ */
diff --git a/arch/powerpc/include/asm/ppc440spe.h b/arch/powerpc/include/asm/ppc440spe.h
new file mode 100644
index 0000000..a4ab797
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440spe.h
@@ -0,0 +1,109 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC440SPE_H_
+#define _PPC440SPE_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+/*
+ * Some SoC specific registers (not common for all 440 SoC's)
+ */
+
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+#define SDR0_PCI0 0x0300
+#define SDR0_SDSTP2 0x0022
+#define SDR0_SDSTP3 0x0023
+
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
+#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
+#define SDR0_SDSTP1_ERPN_MASK (0x80000000 >> 12)
+#define SDR0_SDSTP1_ERPN_EBC 0
+#define SDR0_SDSTP1_ERPN_PCI (0x80000000 >> 12)
+#define SDR0_SDSTP1_EBCW_MASK (0x80000000 >> 24)
+#define SDR0_SDSTP1_EBCW_8_BITS 0
+#define SDR0_SDSTP1_EBCW_16_BITS (0x80000000 >> 24)
+
+#define SDR0_PFC1_EM_1000 (0x80000000 >> 10)
+
+#define SDR0_MFR_FIXD (0x80000000 >> 3) /* Workaround for PCI/DMA */
+
+#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */
+#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0
+ (EBC boot) */
+#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1
+ (PCI boot) */
+#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled -
+ Addr = 0x54 */
+#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled -
+ Addr = 0x50 */
+
+#define SDR0_SRST0_DMC 0x00200000
+
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+
+#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
+#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
+
+#endif /* _PPC440SPE_H_ */
diff --git a/arch/powerpc/include/asm/ppc460ex_gt.h b/arch/powerpc/include/asm/ppc460ex_gt.h
new file mode 100644
index 0000000..a535f75
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc460ex_gt.h
@@ -0,0 +1,216 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC460EX_GT_H_
+#define _PPC460EX_GT_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
+
+#define CONFIG_NAND_NDFC
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+/*
+ * Some SoC specific registers
+ */
+
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000B00)
+#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000C00)
+
+/* DCR */
+#define AHB_TOP 0x00a4
+#define AHB_BOT 0x00a5
+
+/* SDR */
+#define SDR0_PCI0 0x01c0
+#define SDR0_AHB_CFG 0x0370
+#define SDR0_USB2HOST_CFG 0x0371
+#define SDR0_ETH_PLL 0x4102
+#define SDR0_ETH_CFG 0x4103
+#define SDR0_ETH_STS 0x4104
+
+/*
+ * Register bits and masks
+ */
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
+#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
+
+/* CUST0 Customer Configuration Register0 */
+#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
+
+#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
+
+#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
+
+#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+
+#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
+#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
+#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
+
+#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
+#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
+#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
+#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
+#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
+
+/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
+#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /* Ethernet PLL lock indication */
+
+/* Ethernet Configuration Register (SDR0_ETH_CFG) */
+#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /*SGMII3 port loopback
+ enable */
+#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /*SGMII2 port loopback
+ enable */
+#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /*SGMII1 port loopback
+ enable */
+#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /*SGMII0 port loopback
+ enable */
+#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /*SGMII Mask */
+#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /*SGMII2 port enable */
+#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /*SGMII1 port enable */
+#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /*SGMII0 port enable */
+#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /*TAHOE1 Bypass selector */
+#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /*TAHOE0 Bypass selector */
+#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /*EMAC 3 PHY clock selector*/
+#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /*EMAC 2 PHY clock selector*/
+#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /*EMAC 1 PHY clock selector*/
+#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /*EMAC 0 PHY clock selector*/
+#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /*Swap EMAC2 with EMAC1 */
+#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /*Swap EMAC0 with EMAC3 */
+#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /*MDIO source selector mask*/
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /*MDIO source - EMAC0 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /*MDIO source - EMAC1 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /*MDIO source - EMAC2 */
+#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /*MDIO source - EMAC3 */
+#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /*GMC Port 1 bridge
+ selector */
+#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /*GMC Port 0 bridge
+ selector */
+
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
+ transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
+ transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/
+#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/
+#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/
+#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/
+#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/
+ transmitter 2 */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */
+#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/
+ transmitter 3 */
+#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */
+
+#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */
+#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */
+#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */
+#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */
+#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */
+#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access
+ controller 0 */
+#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access
+ controller 1 */
+#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access
+ controller 2 */
+#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access
+ controller 3 */
+#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */
+#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */
+#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */
+#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */
+#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and
+ serdes */
+#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */
+#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */
+#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */
+#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */
+#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */
+#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */
+#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */
+#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */
+#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */
+#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
+#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */
+#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */
+#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */
+#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */
+#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
+#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
+
+#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
+#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
+#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
+#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
+#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
+
+#define CPR0_ICFG_RLI_MASK 0x80000000
+
+#define CPR0_PLLC_RST 0x80000000
+#define CPR0_PLLC_ENG 0x40000000
+
+#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
+#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
+
+#endif /* _PPC460EX_GT_H_ */
diff --git a/arch/powerpc/include/asm/ppc460sx.h b/arch/powerpc/include/asm/ppc460sx.h
new file mode 100644
index 0000000..08ea7c4
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc460sx.h
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC460SX_H_
+#define _PPC460SX_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
+
+#define CONFIG_SYS_PPC4xx_PLB4_ARBITER
+
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+#define SDR0_SRST0_DMC 0x00200000
+
+#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
+#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
+#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
+#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
+#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
+
+#endif /* _PPC460SX_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx-emac.h b/arch/powerpc/include/asm/ppc4xx-emac.h
index 2b51453..25a0512 100644
--- a/arch/powerpc/include/asm/ppc4xx-emac.h
+++ b/arch/powerpc/include/asm/ppc4xx-emac.h
@@ -149,12 +149,6 @@ typedef struct emac_4xx_hw_st {
#define EMAC_STACR_OC_MASK (0x00000000)
#endif
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define SDR0_PFC1_EM_1000 (0x00200000)
-#endif
-
/*
* XMII bridge configurations for those systems (e.g. 405EX(r)) that do
* not have a pin function control (PFC) register to otherwise determine
diff --git a/arch/powerpc/include/asm/ppc4xx-mal.h b/arch/powerpc/include/asm/ppc4xx-mal.h
index 1ca9429..7198685 100644
--- a/arch/powerpc/include/asm/ppc4xx-mal.h
+++ b/arch/powerpc/include/asm/ppc4xx-mal.h
@@ -42,6 +42,45 @@
+----------------------------------------------------------------------------*/
#ifndef _mal_h_
#define _mal_h_
+
+#if !defined(MAL_DCR_BASE)
+#define MAL_DCR_BASE 0x180
+#endif
+#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
+#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Error Status (Read/Clear) */
+#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
+#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */
+#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */
+#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status*/
+#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int */
+#define MAL0_TXBADDR (MAL_DCR_BASE + 0x09) /* TX descriptor base addr*/
+#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */
+#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */
+#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status*/
+#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int */
+#define MAL0_RXBADDR (MAL_DCR_BASE + 0x15) /* RX descriptor base addr */
+#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table pointer */
+#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table pointer */
+#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table pointer */
+#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table pointer */
+#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table pointer */
+#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table pointer */
+#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */
+#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table pointer */
+#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table pointer */
+#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table pointer */
+#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table pointer*/
+#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table pointer*/
+#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */
+#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */
+#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
+#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
+#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
+#endif /* CONFIG_440GX */
+
/* MADMAL transmit and receive status/control bits */
/* for COMMAC bits, refer to the COMMAC header file */
diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h
index 4ec1ef8..ac150c2 100644
--- a/arch/powerpc/include/asm/ppc4xx-sdram.h
+++ b/arch/powerpc/include/asm/ppc4xx-sdram.h
@@ -951,8 +951,6 @@
#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
-#define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */
-
#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
#if defined(CONFIG_SDRAM_PPC4xx_DENALI_DDR2)
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
index ca04bb4..7aff401 100644
--- a/arch/powerpc/include/asm/ppc4xx.h
+++ b/arch/powerpc/include/asm/ppc4xx.h
@@ -25,79 +25,113 @@
#define __PPC4XX_H__
/*
- * Configure which SDRAM/DDR/DDR2 controller is equipped
+ * Include SoC specific headers
*/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
- defined(CONFIG_AP1000) || defined(CONFIG_ML2)
-#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
+#if defined(CONFIG_405CR)
+#include <asm/ppc405cr.h>
+#endif
+
+#if defined(CONFIG_405EP)
+#include <asm/ppc405ep.h>
+#endif
+
+#if defined(CONFIG_405EX)
+#include <asm/ppc405ex.h>
+#endif
+
+#if defined(CONFIG_405EZ)
+#include <asm/ppc405ez.h>
#endif
-#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
+#if defined(CONFIG_405GP)
+#include <asm/ppc405gp.h>
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#include <asm/ppc440ep_gr.h>
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define CONFIG_SDRAM_PPC4xx_DENALI_DDR2 /* Denali DDR(2) controller */
-#endif
-
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define CONFIG_NAND_NDFC
-#endif
-
-/* PLB4 CrossBar Arbiter Core supported across PPC4xx families */
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-
-#define PLB_ARBITER_BASE 0x80
-
-#define PLB0_ACR (PLB_ARBITER_BASE + 0x01)
-#define PLB0_ACR_PPM_MASK 0xF0000000
-#define PLB0_ACR_PPM_FIXED 0x00000000
-#define PLB0_ACR_PPM_FAIR 0xD0000000
-#define PLB0_ACR_HBU_MASK 0x08000000
-#define PLB0_ACR_HBU_DISABLED 0x00000000
-#define PLB0_ACR_HBU_ENABLED 0x08000000
-#define PLB0_ACR_RDP_MASK 0x06000000
-#define PLB0_ACR_RDP_DISABLED 0x00000000
-#define PLB0_ACR_RDP_2DEEP 0x02000000
-#define PLB0_ACR_RDP_3DEEP 0x04000000
-#define PLB0_ACR_RDP_4DEEP 0x06000000
-#define PLB0_ACR_WRP_MASK 0x01000000
-#define PLB0_ACR_WRP_DISABLED 0x00000000
-#define PLB0_ACR_WRP_2DEEP 0x01000000
-
-#define PLB1_ACR (PLB_ARBITER_BASE + 0x09)
-#define PLB1_ACR_PPM_MASK 0xF0000000
-#define PLB1_ACR_PPM_FIXED 0x00000000
-#define PLB1_ACR_PPM_FAIR 0xD0000000
-#define PLB1_ACR_HBU_MASK 0x08000000
-#define PLB1_ACR_HBU_DISABLED 0x00000000
-#define PLB1_ACR_HBU_ENABLED 0x08000000
-#define PLB1_ACR_RDP_MASK 0x06000000
-#define PLB1_ACR_RDP_DISABLED 0x00000000
-#define PLB1_ACR_RDP_2DEEP 0x02000000
-#define PLB1_ACR_RDP_3DEEP 0x04000000
-#define PLB1_ACR_RDP_4DEEP 0x06000000
-#define PLB1_ACR_WRP_MASK 0x01000000
-#define PLB1_ACR_WRP_DISABLED 0x00000000
-#define PLB1_ACR_WRP_2DEEP 0x01000000
-
-#endif /* 440EP/EPX 440GR/GRX 440SP/SPE 460EX/GT/SX 405EX*/
+#include <asm/ppc440epx_grx.h>
+#endif
+
+#if defined(CONFIG_440GP)
+#include <asm/ppc440gp.h>
+#endif
+
+#if defined(CONFIG_440GX)
+#include <asm/ppc440gx.h>
+#endif
+
+#if defined(CONFIG_440SP)
+#include <asm/ppc440sp.h>
+#endif
+
+#if defined(CONFIG_440SPE)
+#include <asm/ppc440spe.h>
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#include <asm/ppc460ex_gt.h>
+#endif
+
+#if defined(CONFIG_460SX)
+#include <asm/ppc460sx.h>
+#endif
+
+/*
+ * Configure which SDRAM/DDR/DDR2 controller is equipped
+ */
+// test-only: what to do with these???
+#if defined(CONFIG_AP1000) || defined(CONFIG_ML2)
+#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
+#endif
+
+/*
+ * Common registers for all SoC's
+ */
+/* DCR registers */
+#define PLB3A0_ACR 0x0077
+#define PLB4A0_ACR 0x0081
+#define PLB4A1_ACR 0x0089
+
+#define PLB4Ax_ACR_PPM_MASK 0xf0000000
+#define PLB4Ax_ACR_PPM_FIXED 0x00000000
+#define PLB4Ax_ACR_PPM_FAIR 0xd0000000
+#define PLB4Ax_ACR_HBU_MASK 0x08000000
+#define PLB4Ax_ACR_HBU_DISABLED 0x00000000
+#define PLB4Ax_ACR_HBU_ENABLED 0x08000000
+#define PLB4Ax_ACR_RDP_MASK 0x06000000
+#define PLB4Ax_ACR_RDP_DISABLED 0x00000000
+#define PLB4Ax_ACR_RDP_2DEEP 0x02000000
+#define PLB4Ax_ACR_RDP_3DEEP 0x04000000
+#define PLB4Ax_ACR_RDP_4DEEP 0x06000000
+#define PLB4Ax_ACR_WRP_MASK 0x01000000
+#define PLB4Ax_ACR_WRP_DISABLED 0x00000000
+#define PLB4Ax_ACR_WRP_2DEEP 0x01000000
+
+/* General Purpose Timer (GPT) Register Offsets */
+#define GPT0_TBC 0x00000000
+#define GPT0_IM 0x00000018
+#define GPT0_ISS 0x0000001C
+#define GPT0_ISC 0x00000020
+#define GPT0_IE 0x00000024
+#define GPT0_COMP0 0x00000080
+#define GPT0_COMP1 0x00000084
+#define GPT0_COMP2 0x00000088
+#define GPT0_COMP3 0x0000008C
+#define GPT0_COMP4 0x00000090
+#define GPT0_COMP5 0x00000094
+#define GPT0_COMP6 0x00000098
+#define GPT0_MASK0 0x000000C0
+#define GPT0_MASK1 0x000000C4
+#define GPT0_MASK2 0x000000C8
+#define GPT0_MASK3 0x000000CC
+#define GPT0_MASK4 0x000000D0
+#define GPT0_MASK5 0x000000D4
+#define GPT0_MASK6 0x000000D8
+#define GPT0_DCT0 0x00000110
+#define GPT0_DCIS 0x0000011C
#if defined(CONFIG_440)
#include <asm/ppc440.h>