summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c107
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h1
-rw-r--r--arch/powerpc/include/asm/fsl_ddr_sdram.h5
4 files changed, 116 insertions, 1 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 3f139c7..e94975a 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -77,6 +77,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
puts("Work-around for Erratum DDR115 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ puts("Work-around for Erratum DDR111 enabled\n");
+ puts("Work-around for Erratum DDR134 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 35997f2..73b320b 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -21,6 +21,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int i;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
+ u32 total_gb_size_per_controller;
+#endif
switch (ctrl_num) {
case 0:
@@ -185,6 +189,26 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
setbits_be32(&ddr->debug[0], 1);
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ /*
+ * This is the combined workaround for DDR111 and DDR134
+ * following the published errata for MPC8572
+ */
+
+ /* 1. Set EEBACR[3] */
+ setbits_be32(&ecm->eebacr, 0x10000000);
+ debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+
+ /* 2. Set DINIT in SDRAM_CFG_2*/
+ setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
+ debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
+ in_be32(&ddr->sdram_cfg_2));
+
+ /* 3. Set DEBUG_3[21] */
+ setbits_be32(&ddr->debug[2], 0x400);
+ debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
+
+#endif /* part 1 of the workaound */
/*
* 500 painful micro-seconds must elapse between
@@ -201,7 +225,88 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
asm volatile("sync;isync");
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+ while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
udelay(10000); /* throttle polling rate */
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ /* continue this workaround */
+
+ /* 4. Clear DEBUG3[21] */
+ clrbits_be32(&ddr->debug[2], 0x400);
+ debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
+
+ /* DDR134 workaround starts */
+ /* A: Clear sdram_cfg_2[odt_cfg] */
+ clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
+ debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
+ in_be32(&ddr->sdram_cfg_2));
+
+ /* B: Set DEBUG1[15] */
+ setbits_be32(&ddr->debug[0], 0x10000);
+ debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
+
+ /* C: Set timing_cfg_2[cpo] to 0b11111 */
+ setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
+ debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
+ in_be32(&ddr->timing_cfg_2));
+
+ /* D: Set D6 to 0x9f9f9f9f */
+ out_be32(&ddr->debug[5], 0x9f9f9f9f);
+ debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
+
+ /* E: Set D7 to 0x9f9f9f9f */
+ out_be32(&ddr->debug[6], 0x9f9f9f9f);
+ debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
+
+ /* F: Set D2[20] */
+ setbits_be32(&ddr->debug[1], 0x800);
+ debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
+
+ /* G: Poll on D2[20] until cleared */
+ while (in_be32(&ddr->debug[1]) & 0x800)
+ udelay(10000); /* throttle polling rate */
+
+ /* H: Clear D1[15] */
+ clrbits_be32(&ddr->debug[0], 0x10000);
+ debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
+
+ /* I: Set sdram_cfg_2[odt_cfg] */
+ setbits_be32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
+ debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
+
+ /* Continuing with the DDR111 workaround */
+ /* 5. Set D2[21] */
+ setbits_be32(&ddr->debug[1], 0x400);
+ debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
+
+ /* 6. Poll D2[21] until its cleared */
+ while (in_be32(&ddr->debug[1]) & 0x400)
+ udelay(10000); /* throttle polling rate */
+
+ /* 7. Wait for 400ms/GB */
+ total_gb_size_per_controller = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ total_gb_size_per_controller +=
+ ((regs->cs[i].bnds & 0xFFFF) >> 6)
+ - (regs->cs[i].bnds >> 22) + 1;
}
+ if (in_be32(&ddr->sdram_cfg) & 0x80000)
+ total_gb_size_per_controller <<= 1;
+ debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
+ udelay(total_gb_size_per_controller * 400000);
+
+ /* 8. Set sdram_cfg_2[dinit] if options requires */
+ setbits_be32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
+ debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
+
+ /* 9. Poll until dinit is cleared */
+ while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+ udelay(10000);
+
+ /* 10. Clear EEBACR[3] */
+ clrbits_be32(&ecm->eebacr, 10000000);
+ debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
}
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index a1a3d6b..3a29d1c 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -78,6 +78,7 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_FSL_ERRATUM_DDR_115
+#define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
#elif defined(CONFIG_P1010)
#define CONFIG_MAX_CPUS 1
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 852e5c3..02a1f5d 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -89,6 +89,11 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define SDRAM_CFG_2T_EN 0x00008000
#define SDRAM_CFG_BI 0x00000001
+#define SDRAM_CFG2_D_INIT 0x00000010
+#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
+
+#define TIMING_CFG_2_CPO_MASK 0x0F800000
+
#if defined(CONFIG_P4080)
#define RD_TO_PRE_MASK 0xf
#define RD_TO_PRE_SHIFT 13