diff options
Diffstat (limited to 'arch')
32 files changed, 305 insertions, 53 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 96db5c5..afa1d6c 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -18,7 +18,7 @@ config ARC config ARM bool "ARM architecture" - select HAVE_PRIVATE_LIBGCC + select HAVE_PRIVATE_LIBGCC if !ARM64 select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0d2a808..506463c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -592,10 +592,6 @@ config TARGET_TBS2910 bool "Support tbs2910" select CPU_V7 -config TARGET_TQMA6 - bool "TQ Systems TQMa6 board" - select CPU_V7 - config TARGET_OT1200 bool "Bachmann OT1200" select CPU_V7 @@ -979,7 +975,6 @@ source "board/ti/ti816x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_vf/Kconfig" -source "board/tqc/tqma6/Kconfig" source "board/trizepsiv/Kconfig" source "board/ttcontrol/vision2/Kconfig" source "board/udoo/Kconfig" diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 1282be3..10908c4 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -33,11 +33,16 @@ config TARGET_SECOMX6 bool "Support secomx6 boards" select CPU_V7 +config TARGET_TQMA6 + bool "TQ Systems TQMa6 board" + select CPU_V7 + endchoice config SYS_SOC default "mx6" source "board/seco/Kconfig" +source "board/tqc/tqma6/Kconfig" endif diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index b21bd03..29de624 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -62,6 +62,7 @@ u32 get_cpu_rev(void) struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; u32 reg = readl(&anatop->digprog_sololite); u32 type = ((reg >> 16) & 0xff); + u32 major; if (type != MXC_CPU_MX6SL) { reg = readl(&anatop->digprog); @@ -79,8 +80,9 @@ u32 get_cpu_rev(void) } } + major = ((reg >> 8) & 0xff); reg &= 0xff; /* mx6 silicon revision */ - return (type << 12) | (reg + 0x10); + return (type << 12) | (reg + (0x10 * (major + 1))); } /* diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 5ed0f45..1c7e6f0 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -22,10 +22,9 @@ * * Startup Code (reset vector) * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack + * Do important init only if we don't start from memory! + * Setup memory and board specific bits prior to relocation. + * Relocate armboot to ram. Setup stack. * *************************************************************************/ diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 0344362..5f39aa0 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -45,11 +45,11 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); #endif #if defined(CONFIG_MACH_SUN8I) - sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0_TX); - sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0_RX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0); #else - sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0_TX); - sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0_RX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0); #endif sunxi_gpio_set_pull(SUNXI_GPF(4), 1); #elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)) @@ -64,6 +64,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0); sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33) + sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0); + sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I) sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0); diff --git a/arch/arm/cpu/armv7/sunxi/rsb.c b/arch/arm/cpu/armv7/sunxi/rsb.c index f115a9c..6fd11f1 100644 --- a/arch/arm/cpu/armv7/sunxi/rsb.c +++ b/arch/arm/cpu/armv7/sunxi/rsb.c @@ -60,11 +60,12 @@ int rsb_init(void) struct sunxi_rsb_reg * const rsb = (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - rsb_cfg_io(); - /* Enable RSB and PIO clk, and de-assert their resets */ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB); + /* Setup external pins */ + rsb_cfg_io(); + writel(RSB_CTRL_SOFT_RST, &rsb->ctrl); rsb_set_clk(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9c735c6..19e1de6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -128,7 +128,8 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb + sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index faea94e..7abd0ae 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -366,6 +366,16 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts index 9777149..9777149 100644 --- a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts +++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts new file mode 100644 index 0000000..5788c29 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts @@ -0,0 +1,129 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Sinlinx SinA33"; + compatible = "sinlinx,sina33", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191011>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <391304>; + }; + + button@600 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + mmc0_cd_pin_sina33: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi index 9b43bc6..85ee080 100644 --- a/arch/arm/dts/sun8i-a33.dtsi +++ b/arch/arm/dts/sun8i-a33.dtsi @@ -86,4 +86,12 @@ compatible = "allwinner,sun8i-a33-pinctrl"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index e522990..c12556a 100644 --- a/arch/arm/imx-common/timer.c +++ b/arch/arm/imx-common/timer.c @@ -44,8 +44,8 @@ static inline int gpt_has_clk_source_osc(void) { #if defined(CONFIG_MX6) if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) && - (is_soc_rev(CHIP_REV_1_0) > 0)) || is_cpu_type(MXC_CPU_MX6DL) || - is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX)) + (soc_rev() > CHIP_REV_1_0)) || is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX)) return 1; return 0; diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index f059d0f..5f0e1e6 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -9,6 +9,8 @@ #define ARCH_MXC +#define CONFIG_SYS_CACHELINE_SIZE 64 + #if defined(CONFIG_MX51) #define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ #define IPU_SOC_BASE_ADDR 0x40000000 diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 0d38d45..35a324c 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -312,6 +312,7 @@ #define CHIP_REV_1_0 0x10 #define CHIP_REV_1_2 0x12 #define CHIP_REV_1_5 0x15 +#define CHIP_REV_2_0 0x20 #ifndef CONFIG_MX6SX #define IRAM_SIZE 0x00040000 #else diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index c583291..28c77a4 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -12,7 +12,7 @@ #include "../arch-imx/cpu.h" #define soc_rev() (get_cpu_rev() & 0xFF) -#define is_soc_rev(rev) (soc_rev() - rev) +#define is_soc_rev(rev) (soc_rev() == rev) u32 get_nr_cpus(void); u32 get_cpu_rev(void); @@ -20,7 +20,7 @@ u32 get_cpu_speed_grade_hz(void); u32 get_cpu_temp_grade(int *minc, int *maxc); /* returns MXC_CPU_ value */ -#define cpu_type(rev) (((rev) >> 12)&0xff) +#define cpu_type(rev) (((rev) >> 12) & 0xff) /* both macros return/take MXC_CPU_ constants */ #define get_cpu_type() (cpu_type(get_cpu_rev())) @@ -30,6 +30,10 @@ const char *get_imx_type(u32 imxtype); unsigned imx_ddr_size(void); void set_chipselect_size(int const); +#define is_mx6dqp() ((is_cpu_type(MXC_CPU_MX6Q) || \ + is_cpu_type(MXC_CPU_MX6D)) && \ + (soc_rev() >= CHIP_REV_2_0)) + /* * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 496295d..8e67b3b 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -156,6 +156,7 @@ enum sunxi_gpio_number { #define SUN4I_GPB_UART0 2 #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 +#define SUN8I_A33_GPB_UART0 3 #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index ae4c21b..43cc494 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -49,8 +49,4 @@ typedef struct bd_info { #define IH_ARCH_DEFAULT IH_ARCH_ARM64 #endif -#if defined(CONFIG_USE_PRIVATE_LIBGCC) && defined(CONFIG_SYS_THUMB_BUILD) -#error Thumb build does not work with private libgcc. -#endif - #endif /* _U_BOOT_H_ */ diff --git a/arch/arm/lib/_ashldi3.S b/arch/arm/lib/_ashldi3.S index 2c26f84..9c34c21 100644 --- a/arch/arm/lib/_ashldi3.S +++ b/arch/arm/lib/_ashldi3.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <linux/linkage.h> + #ifdef __ARMEB__ #define al r1 #define ah r0 @@ -13,9 +15,8 @@ #endif .globl __ashldi3 -.globl __aeabi_llsl __ashldi3: -__aeabi_llsl: +ENTRY(__aeabi_llsl) subs r3, r2, #32 rsb ip, r2, #32 @@ -24,3 +25,4 @@ __aeabi_llsl: orrmi ah, ah, al, lsr ip mov al, al, lsl r2 mov pc, lr +ENDPROC(__aeabi_llsl) diff --git a/arch/arm/lib/_ashrdi3.S b/arch/arm/lib/_ashrdi3.S index 4d93c8a..c74fd64 100644 --- a/arch/arm/lib/_ashrdi3.S +++ b/arch/arm/lib/_ashrdi3.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <linux/linkage.h> + #ifdef __ARMEB__ #define al r1 #define ah r0 @@ -13,9 +15,8 @@ #endif .globl __ashrdi3 -.globl __aeabi_lasr __ashrdi3: -__aeabi_lasr: +ENTRY(__aeabi_lasr) subs r3, r2, #32 rsb ip, r2, #32 @@ -24,3 +25,4 @@ __aeabi_lasr: orrmi al, al, ah, lsl ip mov ah, ah, asr r2 mov pc, lr +ENDPROC(__aeabi_lasr) diff --git a/arch/arm/lib/_divsi3.S b/arch/arm/lib/_divsi3.S index 6015493..c463c68 100644 --- a/arch/arm/lib/_divsi3.S +++ b/arch/arm/lib/_divsi3.S @@ -1,3 +1,5 @@ +#include <linux/linkage.h> + .macro ARM_DIV_BODY dividend, divisor, result, curbit #if __LINUX_ARM_ARCH__ >= 5 @@ -95,9 +97,8 @@ .align 5 .globl __divsi3 -.globl __aeabi_idiv __divsi3: -__aeabi_idiv: +ENTRY(__aeabi_idiv) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. beq Ldiv0 @@ -139,3 +140,4 @@ Ldiv0: bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #4 +ENDPROC(__aeabi_idiv) diff --git a/arch/arm/lib/_lshrdi3.S b/arch/arm/lib/_lshrdi3.S index 33296a0..1f9b916 100644 --- a/arch/arm/lib/_lshrdi3.S +++ b/arch/arm/lib/_lshrdi3.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <linux/linkage.h> + #ifdef __ARMEB__ #define al r1 #define ah r0 @@ -13,9 +15,8 @@ #endif .globl __lshrdi3 -.globl __aeabi_llsr __lshrdi3: -__aeabi_llsr: +ENTRY(__aeabi_llsr) subs r3, r2, #32 rsb ip, r2, #32 @@ -24,3 +25,4 @@ __aeabi_llsr: orrmi al, al, ah, lsl ip mov ah, ah, lsr r2 mov pc, lr +ENDPROC(__aeabi_llsr) diff --git a/arch/arm/lib/_modsi3.S b/arch/arm/lib/_modsi3.S index 3d31a55..c5e1c22 100644 --- a/arch/arm/lib/_modsi3.S +++ b/arch/arm/lib/_modsi3.S @@ -1,3 +1,5 @@ +#include <linux/linkage.h> + .macro ARM_MOD_BODY dividend, divisor, order, spare #if __LINUX_ARM_ARCH__ >= 5 @@ -69,8 +71,7 @@ .endm .align 5 -.globl __modsi3 -__modsi3: +ENTRY(__modsi3) cmp r1, #0 beq Ldiv0 rsbmi r1, r1, #0 @ loops below use unsigned. @@ -88,7 +89,7 @@ __modsi3: 10: cmp ip, #0 rsbmi r0, r0, #0 mov pc, lr - +ENDPROC(__modsi3) Ldiv0: diff --git a/arch/arm/lib/_udivsi3.S b/arch/arm/lib/_udivsi3.S index 1309802..3b653be 100644 --- a/arch/arm/lib/_udivsi3.S +++ b/arch/arm/lib/_udivsi3.S @@ -1,3 +1,5 @@ +#include <linux/linkage.h> + /* # 1 "libgcc1.S" */ @ libgcc1 routines for ARM cpu. @ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) @@ -72,8 +74,7 @@ Ldiv0: ldmia sp!, {pc} .size __udivsi3 , . - __udivsi3 -.globl __aeabi_uidivmod -__aeabi_uidivmod: +ENTRY(__aeabi_uidivmod) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -81,9 +82,9 @@ __aeabi_uidivmod: mul r3, r0, r2 sub r1, r1, r3 mov pc, lr +ENDPROC(__aeabi_uidivmod) -.globl __aeabi_idivmod -__aeabi_idivmod: +ENTRY(__aeabi_idivmod) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv @@ -91,3 +92,4 @@ __aeabi_idivmod: mul r3, r0, r2 sub r1, r1, r3 mov pc, lr +ENDPROC(__aeabi_idivmod) diff --git a/arch/arm/lib/_umodsi3.S b/arch/arm/lib/_umodsi3.S index 8465ef0..b166737 100644 --- a/arch/arm/lib/_umodsi3.S +++ b/arch/arm/lib/_umodsi3.S @@ -1,3 +1,5 @@ +#include <linux/linkage.h> + /* # 1 "libgcc1.S" */ @ libgcc1 routines for ARM cpu. @ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) @@ -11,10 +13,9 @@ curbit .req r3 /* lr .req r14 */ /* pc .req r15 */ .text - .globl __umodsi3 .type __umodsi3 ,function .align 0 - __umodsi3 : + ENTRY(__umodsi3) cmp divisor, #0 beq Ldiv0 mov curbit, #1 @@ -86,3 +87,4 @@ Ldiv0: /* # 456 "libgcc1.S" */ /* # 500 "libgcc1.S" */ /* # 580 "libgcc1.S" */ +ENDPROC(__umodsi3) diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 0121db8..9bc9f00 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -6,10 +6,13 @@ #include <common.h> #include <netdev.h> +#include <ahci.h> +#include <linux/mbus.h> #include <asm/io.h> #include <asm/pl310.h> #include <asm/arch/cpu.h> #include <asm/arch/soc.h> +#include <sdhci.h> #define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) #define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) @@ -245,6 +248,69 @@ int cpu_eth_init(bd_t *bis) } #endif +#ifdef CONFIG_MV_SDHCI +int board_mmc_init(bd_t *bis) +{ + mv_sdh_init(MVEBU_SDIO_BASE, 0, 0, + SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_WAIT_SEND_CMD); + + return 0; +} +#endif + +#ifdef CONFIG_SCSI_AHCI_PLAT +#define AHCI_VENDOR_SPECIFIC_0_ADDR 0xa0 +#define AHCI_VENDOR_SPECIFIC_0_DATA 0xa4 + +#define AHCI_WINDOW_CTRL(win) (0x60 + ((win) << 4)) +#define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4)) +#define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4)) + +static void ahci_mvebu_mbus_config(void __iomem *base) +{ + const struct mbus_dram_target_info *dram; + int i; + + dram = mvebu_mbus_dram_info(); + + for (i = 0; i < 4; i++) { + writel(0, base + AHCI_WINDOW_CTRL(i)); + writel(0, base + AHCI_WINDOW_BASE(i)); + writel(0, base + AHCI_WINDOW_SIZE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + writel((cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + base + AHCI_WINDOW_CTRL(i)); + writel(cs->base >> 16, base + AHCI_WINDOW_BASE(i)); + writel(((cs->size - 1) & 0xffff0000), + base + AHCI_WINDOW_SIZE(i)); + } +} + +static void ahci_mvebu_regret_option(void __iomem *base) +{ + /* + * Enable the regret bit to allow the SATA unit to regret a + * request that didn't receive an acknowlegde and avoid a + * deadlock + */ + writel(0x4, base + AHCI_VENDOR_SPECIFIC_0_ADDR); + writel(0x80, base + AHCI_VENDOR_SPECIFIC_0_DATA); +} + +void scsi_init(void) +{ + printf("MVEBU SATA INIT\n"); + ahci_mvebu_mbus_config((void __iomem *)MVEBU_SATA0_BASE); + ahci_mvebu_regret_option((void __iomem *)MVEBU_SATA0_BASE); + ahci_init((void __iomem *)MVEBU_SATA0_BASE); +} +#endif + #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index 3b48460..4bdb633 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -114,6 +114,8 @@ void mvebu_sdram_size_adjust(enum memory_bank bank); int mvebu_mbus_probe(struct mbus_win windows[], int count); int mvebu_soc_family(void); +int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks); + /* * Highspeed SERDES PHY config init, ported from bin_hdr * to mainline U-Boot diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h new file mode 100644 index 0000000..09e3c50 --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/gpio.h @@ -0,0 +1,10 @@ +/* + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_MVEBU_GPIO_H +#define __MACH_MVEBU_GPIO_H + +/* Empty file - sdhci requires this. */ + +#endif diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index 0a9307c..1aaea67 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -49,8 +49,11 @@ #define MVEBU_EGIGA2_BASE (MVEBU_REGISTER(0x30000)) #define MVEBU_EGIGA3_BASE (MVEBU_REGISTER(0x34000)) #define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000)) +#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000)) #define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000)) #define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000)) +#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000)) +#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000)) #define SDRAM_MAX_CS 4 #define SDRAM_ADDR_MASK 0xFF000000 diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index 75ec380..af2adc7 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -18,7 +18,7 @@ static inline void mips_cache(int op, const volatile void *addr) #ifdef __GCC_HAVE_BUILTIN_MIPS_CACHE __builtin_mips_cache(op, addr); #else - __asm__ __volatile__("cache %0, %1" : : "i"(op), "R"(addr)) + __asm__ __volatile__("cache %0, %1" : : "i"(op), "R"(addr)); #endif } diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 3fa37f5..a7ab087 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -117,7 +117,7 @@ static inline void set_io_port_base(unsigned long base) * Change virtual addresses to physical addresses and vv. * These are trivial on the 1:1 Linux/MIPS mapping */ -extern inline phys_addr_t virt_to_phys(volatile void * address) +static inline phys_addr_t virt_to_phys(volatile void * address) { #ifndef CONFIG_64BIT return CPHYSADDR(address); @@ -126,7 +126,7 @@ extern inline phys_addr_t virt_to_phys(volatile void * address) #endif } -extern inline void * phys_to_virt(unsigned long address) +static inline void * phys_to_virt(unsigned long address) { #ifndef CONFIG_64BIT return (void *)KSEG0ADDR(address); @@ -138,7 +138,7 @@ extern inline void * phys_to_virt(unsigned long address) /* * IO bus memory addresses are also 1:1 with the physical address */ -extern inline unsigned long virt_to_bus(volatile void * address) +static inline unsigned long virt_to_bus(volatile void * address) { #ifndef CONFIG_64BIT return CPHYSADDR(address); @@ -147,7 +147,7 @@ extern inline unsigned long virt_to_bus(volatile void * address) #endif } -extern inline void * bus_to_virt(unsigned long address) +static inline void * bus_to_virt(unsigned long address) { #ifndef CONFIG_64BIT return (void *)KSEG0ADDR(address); @@ -165,12 +165,12 @@ extern unsigned long isa_slot_offset; extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); #if 0 -extern inline void *ioremap(unsigned long offset, unsigned long size) +static inline void *ioremap(unsigned long offset, unsigned long size) { return __ioremap(offset, size, _CACHE_UNCACHED); } -extern inline void *ioremap_nocache(unsigned long offset, unsigned long size) +static inline void *ioremap_nocache(unsigned long offset, unsigned long size) { return __ioremap(offset, size, _CACHE_UNCACHED); } diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index 7a28952..d56f73b 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -22,7 +22,7 @@ #include <linux/kernel.h> #endif -extern __inline__ void +static __inline__ void __sti(void) { __asm__ __volatile__( @@ -46,7 +46,7 @@ __sti(void) * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs * no nops at all. */ -extern __inline__ void +static __inline__ void __cli(void) { __asm__ __volatile__( @@ -207,7 +207,7 @@ do { \ * For 32 and 64 bit operands we can take advantage of ll and sc. * FIXME: This doesn't work for R3000 machines. */ -extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val) +static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val) { #ifdef CONFIG_CPU_HAS_LLSC unsigned long dummy; |