diff options
Diffstat (limited to 'arch')
211 files changed, 12432 insertions, 811 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index afa1d6c..e952bb1 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -1,3 +1,6 @@ +config CREATE_ARCH_SYMLINK + bool + config HAVE_GENERIC_BOARD bool @@ -18,12 +21,14 @@ config ARC config ARM bool "ARM architecture" + select CREATE_ARCH_SYMLINK select HAVE_PRIVATE_LIBGCC if !ARM64 select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL config AVR32 bool "AVR32 architecture" + select CREATE_ARCH_SYMLINK select HAVE_GENERIC_BOARD select SYS_GENERIC_BOARD @@ -84,9 +89,11 @@ config SH config SPARC bool "SPARC architecture" + select CREATE_ARCH_SYMLINK config X86 bool "x86 architecture" + select CREATE_ARCH_SYMLINK select HAVE_PRIVATE_LIBGCC select HAVE_GENERIC_BOARD select SYS_GENERIC_BOARD diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dc3c9ae..32fa2dd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -642,11 +642,17 @@ config ARCH_SOCFPGA config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" + select CMD_USB select DM select DM_GPIO + select DM_ETH + select DM_SERIAL + select DM_USB select OF_CONTROL select OF_SEPARATE select SPL_DISABLE_OF_CONTROL + select USB + select USB_STORAGE config TARGET_SNOWBALL bool "Support snowball" @@ -674,23 +680,12 @@ config ARCH_ZYNQ select DM_SPI select DM_SPI_FLASH -config TARGET_XILINX_ZYNQMP +config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 config TEGRA bool "NVIDIA Tegra" - select SUPPORT_SPL - select SPL - select OF_CONTROL - select SPL_DISABLE_OF_CONTROL - select CPU_V7 - select DM - select DM_SPI_FLASH - select DM_SERIAL - select DM_I2C - select DM_SPI - select DM_GPIO config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" @@ -867,6 +862,8 @@ source "arch/arm/mach-zynq/Kconfig" source "arch/arm/cpu/armv7/Kconfig" +source "arch/arm/cpu/armv8/zynqmp/Kconfig" + source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/imx-common/Kconfig" @@ -985,7 +982,6 @@ source "board/warp/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/xaeniax/Kconfig" -source "board/xilinx/zynqmp/Kconfig" source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 781d83f..52a6824 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -51,15 +51,6 @@ u32 get_cpu_type(void) } /** - * get_board_rev() - setup to pass kernel board revision information - * returns: 0 for the ATAG REVISION tag value. - */ -u32 __weak get_board_rev(void) -{ - return 0; -} - -/** * get_device_type(): tell if GP/HS/EMU/TST */ u32 get_device_type(void) diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile index 2e6a207..2d55782 100644 --- a/arch/arm/cpu/armv7/ls102xa/Makefile +++ b/arch/arm/cpu/armv7/ls102xa/Makefile @@ -12,3 +12,7 @@ obj-y += fsl_epu.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o obj-$(CONFIG_SPL) += spl.o + +ifdef CONFIG_ARMV7_PSCI +obj-y += psci.o +endif diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 71a1753..e01d911 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -29,29 +29,30 @@ void ft_fixup_enet_phy_connect_type(void *fdt) char phy[16]; int phy_node; int i = 0; - int enet_id = 0; uint32_t ph; while ((dev = eth_get_dev_by_index(i++)) != NULL) { - if (strstr(dev->name, "eTSEC1")) - enet_id = 0; - else if (strstr(dev->name, "eTSEC2")) - enet_id = 1; - else if (strstr(dev->name, "eTSEC3")) - enet_id = 2; - else + if (strstr(dev->name, "eTSEC1")) { + strcpy(enet, "ethernet0"); + strcpy(phy, "enet0_rgmii_phy"); + } else if (strstr(dev->name, "eTSEC2")) { + strcpy(enet, "ethernet1"); + strcpy(phy, "enet1_rgmii_phy"); + } else if (strstr(dev->name, "eTSEC3")) { + strcpy(enet, "ethernet2"); + strcpy(phy, "enet2_rgmii_phy"); + } else { continue; + } priv = dev->priv; if (priv->flags & TSEC_SGMII) continue; - sprintf(enet, "ethernet%d", enet_id); enet_path = fdt_get_alias(fdt, enet); if (!enet_path) continue; - sprintf(phy, "enet%d_rgmii_phy", enet_id); phy_path = fdt_get_alias(fdt, phy); if (!phy_path) continue; diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S new file mode 100644 index 0000000..cf5cd48 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/psci.S @@ -0,0 +1,126 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * Author: Wang Dongsheng <dongsheng.wang@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <linux/linkage.h> + +#include <asm/armv7.h> +#include <asm/arch-armv7/generictimer.h> +#include <asm/psci.h> + +#define SCFG_CORE0_SFT_RST 0x130 +#define SCFG_CORESRENCR 0x204 + +#define DCFG_CCSR_BRR 0x0E4 +#define DCFG_CCSR_SCRATCHRW1 0x200 + + .pushsection ._secure.text, "ax" + + .arch_extension sec + +#define ONE_MS (GENERIC_TIMER_CLK / 1000) +#define RESET_WAIT (30 * ONE_MS) + + @ r1 = target CPU + @ r2 = target PC +.globl psci_cpu_on +psci_cpu_on: + push {lr} + + @ Clear and Get the correct CPU number + @ r1 = 0xf01 + and r1, r1, #0xff + + mov r0, r1 + bl psci_get_cpu_stack_top + str r2, [r0] + dsb + + @ Get DCFG base address + movw r4, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff) + movt r4, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16) + + @ Detect target CPU state + ldr r2, [r4, #DCFG_CCSR_BRR] + rev r2, r2 + lsr r2, r2, r1 + ands r2, r2, #1 + beq holdoff_release + + @ Reset target CPU + @ Get SCFG base address + movw r0, #(CONFIG_SYS_FSL_SCFG_ADDR & 0xffff) + movt r0, #(CONFIG_SYS_FSL_SCFG_ADDR >> 16) + + @ Enable CORE Soft Reset + movw r5, #0 + movt r5, #(1 << 15) + rev r5, r5 + str r5, [r0, #SCFG_CORESRENCR] + + @ Get CPUx offset register + mov r6, #0x4 + mul r6, r6, r1 + add r2, r0, r6 + + @ Do reset on target CPU + movw r5, #0 + movt r5, #(1 << 15) + rev r5, r5 + str r5, [r2, #SCFG_CORE0_SFT_RST] + + @ Wait target CPU up + timer_wait r2, RESET_WAIT + + @ Disable CORE soft reset + mov r5, #0 + str r5, [r0, #SCFG_CORESRENCR] + +holdoff_release: + @ Release on target CPU + ldr r2, [r4, #DCFG_CCSR_BRR] + mov r6, #1 + lsl r6, r6, r1 @ 32 bytes per CPU + + rev r6, r6 + orr r2, r2, r6 + str r2, [r4, #DCFG_CCSR_BRR] + + @ Set secondary boot entry + ldr r6, =psci_cpu_entry + rev r6, r6 + str r6, [r4, #DCFG_CCSR_SCRATCHRW1] + + isb + dsb + + @ Return + mov r0, #ARM_PSCI_RET_SUCCESS + + pop {lr} + bx lr + +.globl psci_cpu_off +psci_cpu_off: + bl psci_cpu_off_common + +1: wfi + b 1b + +.globl psci_arch_init +psci_arch_init: + mov r6, lr + + bl psci_get_cpu_id + bl psci_get_cpu_stack_top + mov sp, r0 + + bx r6 + + .globl psci_text_end +psci_text_end: + .popsection diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index f3725b2..464a5d1 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -26,9 +26,7 @@ ifeq ($(CONFIG_SYS_DCACHE_OFF),) obj-y += omap-cache.o endif -ifeq ($(CONFIG_OMAP34XX),) obj-y += boot-common.o -endif obj-y += lowlevel_init.o obj-y += mem-common.o diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index bbc6bed..5ec46fa 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -17,27 +17,34 @@ #include <asm/arch/sys_proto.h> #include <watchdog.h> #include <scsi.h> +#include <i2c.h> DECLARE_GLOBAL_DATA_PTR; +__weak u32 omap_sys_boot_device(void) +{ + return BOOT_DEVICE_NONE; +} + void save_omap_boot_params(void) { - u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - u8 boot_device; - u32 dev_desc, dev_data; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + struct omap_boot_parameters *omap_boot_params; + u32 boot_device; + u32 boot_mode; - if ((rom_params < NON_SECURE_SRAM_START) || - (rom_params > NON_SECURE_SRAM_END)) + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) return; - /* - * rom_params can be type casted to omap_boot_parameters and - * used. But it not correct to assume that romcode structure - * encoding would be same as u-boot. So use the defined offsets. - */ - boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + omap_boot_params = (struct omap_boot_parameters *)boot_params; + + boot_device = omap_boot_params->boot_device; + boot_mode = MMCSD_MODE_UNDEFINED; + + /* Boot device */ -#if defined(BOOT_DEVICE_NAND_I2C) +#ifdef BOOT_DEVICE_NAND_I2C /* * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. * Otherwise the SPL boot IF can't handle this device correctly. @@ -47,61 +54,109 @@ void save_omap_boot_params(void) if (boot_device == BOOT_DEVICE_NAND_I2C) boot_device = BOOT_DEVICE_NAND; #endif - gd->arch.omap_boot_params.omap_bootdevice = boot_device; +#ifdef BOOT_DEVICE_QSPI_4 + /* + * We get different values for QSPI_1 and QSPI_4 being used, but + * don't actually care about this difference. Rather than + * mangle the later code, if we're coming in as QSPI_4 just + * change to the QSPI_1 value. + */ + if (boot_device == BOOT_DEVICE_QSPI_4) + boot_device = BOOT_DEVICE_SPI; +#endif +#if (defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)) || \ + (defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)) || \ + (defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USBETH_SUPPORT)) + /* + * When booting from peripheral booting, the boot device is not usable + * as-is (unless there is support for it), so the boot device is instead + * figured out using the SYS_BOOT pins. + */ + switch (boot_device) { +#ifdef BOOT_DEVICE_UART + case BOOT_DEVICE_UART: +#endif +#ifdef BOOT_DEVICE_USB + case BOOT_DEVICE_USB: +#endif + boot_device = omap_sys_boot_device(); + + /* MMC raw mode will fallback to FS mode. */ + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) + boot_mode = MMCSD_MODE_RAW; - gd->arch.omap_boot_params.ch_flags = - *((u8 *)(rom_params + CH_FLAGS_OFFSET)); + break; + } +#endif + gd->arch.omap_boot_device = boot_device; + + /* Boot mode */ + +#ifdef CONFIG_OMAP34XX if ((boot_device >= MMC_BOOT_DEVICES_START) && (boot_device <= MMC_BOOT_DEVICES_END)) { -#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \ - !defined(CONFIG_AM43XX) - if ((omap_hw_init_context() == - OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { - gd->arch.omap_boot_params.omap_bootmode = - *((u8 *)(rom_params + BOOT_MODE_OFFSET)); - } else -#endif - { - dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); - dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); - gd->arch.omap_boot_params.omap_bootmode = - *((u32 *)(dev_data + BOOT_MODE_OFFSET)); + switch (boot_device) { + case BOOT_DEVICE_MMC1: + boot_mode = MMCSD_MODE_FS; + break; + case BOOT_DEVICE_MMC2: + boot_mode = MMCSD_MODE_RAW; + break; } } - -#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) +#else /* - * We get different values for QSPI_1 and QSPI_4 being used, but - * don't actually care about this difference. Rather than - * mangle the later code, if we're coming in as QSPI_4 just - * change to the QSPI_1 value. + * If the boot device was dynamically changed and doesn't match what + * the bootrom initially booted, we cannot use the boot device + * descriptor to figure out the boot mode. */ - if (gd->arch.omap_boot_params.omap_bootdevice == 11) - gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI; + if ((boot_device == omap_boot_params->boot_device) && + (boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { + boot_params = omap_boot_params->boot_device_descriptor; + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); + + if (boot_mode != MMCSD_MODE_FS && + boot_mode != MMCSD_MODE_RAW) +#ifdef CONFIG_SUPPORT_EMMC_BOOT + boot_mode = MMCSD_MODE_EMMCBOOT; +#else + boot_mode = MMCSD_MODE_UNDEFINED; +#endif + } +#endif + + gd->arch.omap_boot_mode = boot_mode; + +#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ + !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) + + /* CH flags */ + + gd->arch.omap_ch_flags = omap_boot_params->ch_flags; #endif } #ifdef CONFIG_SPL_BUILD u32 spl_boot_device(void) { - return (u32) (gd->arch.omap_boot_params.omap_bootdevice); + return gd->arch.omap_boot_device; } u32 spl_boot_mode(void) { - u32 val = gd->arch.omap_boot_params.omap_bootmode; - - if (val == MMCSD_MODE_RAW) - return MMCSD_MODE_RAW; - else if (val == MMCSD_MODE_FS) - return MMCSD_MODE_FS; - else -#ifdef CONFIG_SUPPORT_EMMC_BOOT - return MMCSD_MODE_EMMCBOOT; -#else - return MMCSD_MODE_UNDEFINED; -#endif + return gd->arch.omap_boot_mode; } void spl_board_init(void) @@ -116,9 +171,12 @@ void spl_board_init(void) /* Prepare console output */ preloader_console_init(); -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif +#ifdef CONFIG_SPL_I2C_SUPPORT + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); +#endif #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) arch_misc_init(); #endif @@ -150,9 +208,11 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image->entry_point; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ - image_entry((u32 *)&gd->arch.omap_boot_params); + image_entry((u32 *)boot_params); } #endif @@ -163,7 +223,7 @@ void arch_preboot_os(void) } #endif -#if defined(CONFIG_CMD_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) +#if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE) int fb_set_reboot_flag(void) { printf("Setting reboot to fastboot flag ...\n"); diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 6c8f3bc..80794f9 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -90,7 +90,9 @@ void __weak srcomp_enable(void) */ int arch_cpu_init(void) { +#ifdef CONFIG_SPL save_omap_boot_params(); +#endif return 0; } #endif /* CONFIG_ARCH_CPU_INIT */ diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 746df92..5283135 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -16,8 +16,9 @@ #include <asm/arch/spl.h> #include <linux/linkage.h> -#ifndef CONFIG_OMAP34XX +#ifdef CONFIG_SPL ENTRY(save_boot_params) + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] b save_boot_params_ret diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index cf86046..b2fce96 100644 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -8,6 +8,7 @@ obj-y := lowlevel_init.o obj-y += board.o +obj-y += boot.o obj-y += clock.o obj-y += sys_info.o ifdef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index b064c0c..17cb5b7 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -18,7 +18,6 @@ */ #include <common.h> #include <dm.h> -#include <mmc.h> #include <spl.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> @@ -27,8 +26,6 @@ #include <asm/armv7.h> #include <asm/gpio.h> #include <asm/omap_common.h> -#include <asm/arch/mmc_host_def.h> -#include <i2c.h> #include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -73,62 +70,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; #endif -#ifdef CONFIG_SPL_BUILD -/* -* We use static variables because global data is not ready yet. -* Initialized data is available in SPL right from the beginning. -* We would not typically need to save these parameters in regular -* U-Boot. This is needed only in SPL at the moment. -*/ -u32 omap3_boot_device = BOOT_DEVICE_NAND; - -/* auto boot mode detection is not possible for OMAP3 - hard code */ -u32 spl_boot_mode(void) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC2: - return MMCSD_MODE_RAW; - case BOOT_DEVICE_MMC1: - return MMCSD_MODE_FS; - break; - default: - puts("spl: ERROR: unknown device - can't select boot mode\n"); - hang(); - } -} - -u32 spl_boot_device(void) -{ - return omap3_boot_device; -} - -int board_mmc_init(bd_t *bis) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0, -1, -1); - break; - case BOOT_DEVICE_MMC2: - case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0, -1, -1); - break; - } - return 0; -} - -void spl_board_init(void) -{ - preloader_console_init(); -#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) - gpmc_init(); -#endif -#ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -#endif -} -#endif /* CONFIG_SPL_BUILD */ - - /****************************************************************************** * Routine: secure_unlock * Description: Setup security registers for access diff --git a/arch/arm/cpu/armv7/omap3/boot.c b/arch/arm/cpu/armv7/omap3/boot.c new file mode 100644 index 0000000..66576b2 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/boot.c @@ -0,0 +1,58 @@ +/* + * OMAP3 boot + * + * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <spl.h> + +static u32 boot_devices[] = { + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_NAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC2_2, +}; + +u32 omap_sys_boot_device(void) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + u32 sys_boot; + + /* Grab the first 5 bits of the status register for SYS_BOOT. */ + sys_boot = readl(&ctrl_base->status) & ((1 << 5) - 1); + + if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) + return BOOT_DEVICE_NONE; + + return boot_devices[sys_boot]; +} diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 2497613..1e58772 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -16,16 +16,6 @@ #include <asm/arch/clocks_omap3.h> #include <linux/linkage.h> -#ifdef CONFIG_SPL_BUILD -ENTRY(save_boot_params) - ldr r4, =omap3_boot_device - ldr r5, [r0, #0x4] - and r5, r5, #0xff - str r5, [r4] - b save_boot_params_ret -ENDPROC(save_boot_params) -#endif - /* * Funtion for making PPA HAL API calls in secure devices * Input: diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c index bbb65bb..ab60a03 100644 --- a/arch/arm/cpu/armv7/omap3/sys_info.c +++ b/arch/arm/cpu/armv7/omap3/sys_info.c @@ -196,10 +196,12 @@ u32 get_gpmc0_width(void) * get_board_rev() - setup to pass kernel board revision information * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) *************************************************************************/ +#ifdef CONFIG_REVISION_TAG u32 __weak get_board_rev(void) { return 0x20; } +#endif /******************************************************** * get_base(); get upper addr of current execution diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index 76a032a..564f1f6 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -5,6 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += boot.o obj-y += sdram_elpida.o obj-y += hwinit.o obj-y += emif.o diff --git a/arch/arm/cpu/armv7/omap4/boot.c b/arch/arm/cpu/armv7/omap4/boot.c new file mode 100644 index 0000000..4b5aa77 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/boot.c @@ -0,0 +1,60 @@ +/* + * OMAP4 boot + * + * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/omap_common.h> +#include <spl.h> + +static u32 boot_devices[] = { + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIPWAIT, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_ONENAND, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIP, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_MMC2_2, + BOOT_DEVICE_NONE, + BOOT_DEVICE_XIPWAIT, +}; + +u32 omap_sys_boot_device(void) +{ + u32 sys_boot; + + /* Grab the first 5 bits of the status register for SYS_BOOT. */ + sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 5) - 1); + + if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) + return BOOT_DEVICE_NONE; + + return boot_devices[sys_boot]; +} diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c index 1ed146b..8698ec7 100644 --- a/arch/arm/cpu/armv7/omap4/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -279,6 +279,7 @@ struct prcm_regs const omap4_prcm = { }; struct omap_sys_ctrl_regs const omap4_ctrl = { + .control_status = 0x4A0022C4, .control_id_code = 0x4A002204, .control_std_fuse_opp_bgap = 0x4a002260, .control_status = 0x4a0022c4, diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index e709f14..f2930d5 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -5,6 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += boot.o obj-y += hwinit.o obj-y += emif.o obj-y += sdram.o diff --git a/arch/arm/cpu/armv7/omap5/boot.c b/arch/arm/cpu/armv7/omap5/boot.c new file mode 100644 index 0000000..583becc --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/boot.c @@ -0,0 +1,46 @@ +/* + * OMAP5 boot + * + * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/omap_common.h> +#include <spl.h> + +static u32 boot_devices[] = { +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) + BOOT_DEVICE_MMC2, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_SATA, + BOOT_DEVICE_XIP, + BOOT_DEVICE_XIP, + BOOT_DEVICE_SPI, + BOOT_DEVICE_SPI, +#else + BOOT_DEVICE_MMC2, + BOOT_DEVICE_NAND, + BOOT_DEVICE_MMC1, + BOOT_DEVICE_SATA, + BOOT_DEVICE_XIP, + BOOT_DEVICE_MMC2, + BOOT_DEVICE_XIPWAIT, +#endif +}; + +u32 omap_sys_boot_device(void) +{ + u32 sys_boot; + + /* Grab the first 4 bits of the status register for SYS_BOOT. */ + sys_boot = readl((u32 *) (*ctrl)->control_status) & ((1 << 4) - 1); + + if (sys_boot >= (sizeof(boot_devices) / sizeof(u32))) + return BOOT_DEVICE_NONE; + + return boot_devices[sys_boot]; +} diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 5f39aa0..f01846e 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -11,6 +11,7 @@ */ #include <common.h> +#include <mmc.h> #include <i2c.h> #include <serial.h> #ifdef CONFIG_SPL_BUILD @@ -22,6 +23,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/sys_proto.h> #include <asm/arch/timer.h> +#include <asm/arch/mmc.h> #include <linux/compiler.h> @@ -121,17 +123,18 @@ void s_init(void) } #ifdef CONFIG_SPL_BUILD +DECLARE_GLOBAL_DATA_PTR; + /* The sunxi internal brom will try to loader external bootloader * from mmc0, nand flash, mmc2. - * Unfortunately we can't check how SPL was loaded so assume - * it's always the first SD/MMC controller */ u32 spl_boot_device(void) { + struct mmc *mmc0, *mmc1; /* - * When booting from the SD card, the "eGON.BT0" signature is expected - * to be found in memory at the address 0x0004 (see the "mksunxiboot" - * tool, which generates this header). + * When booting from the SD card or NAND memory, the "eGON.BT0" + * signature is expected to be found in memory at the address 0x0004 + * (see the "mksunxiboot" tool, which generates this header). * * When booting in the FEL mode over USB, this signature is patched in * memory and replaced with something else by the 'fel' tool. This other @@ -139,15 +142,40 @@ u32 spl_boot_device(void) * valid bootable SD card image (because the BROM would refuse to * execute the SPL in this case). * - * This branch is just making a decision at runtime whether to load - * the main u-boot binary from the SD card (if the "eGON.BT0" signature - * is found) or return to the FEL code in the BROM to wait and receive - * the main u-boot binary over USB. + * This checks for the signature and if it is not found returns to + * the FEL code in the BROM to wait and receive the main u-boot + * binary over USB. If it is found, it determines where SPL was + * read from. */ - if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */ - return BOOT_DEVICE_MMC1; - else + if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */ return BOOT_DEVICE_BOARD; + + /* The BROM will try to boot from mmc0 first, so try that first. */ + mmc_initialize(gd->bd); + mmc0 = find_mmc_device(0); + if (sunxi_mmc_has_egon_boot_signature(mmc0)) + return BOOT_DEVICE_MMC1; + + /* Fallback to booting NAND if enabled. */ + if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT)) + return BOOT_DEVICE_NAND; + + if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) { + mmc1 = find_mmc_device(1); + if (sunxi_mmc_has_egon_boot_signature(mmc1)) { + /* + * spl_mmc.c: spl_mmc_load_image() is hard-coded to + * use find_mmc_device(0), no matter what we + * return. Swap mmc0 and mmc2 to make this work. + */ + mmc0->block_dev.dev = 1; + mmc1->block_dev.dev = 0; + return BOOT_DEVICE_MMC2; + } + } + + panic("Could not determine boot source\n"); + return -1; /* Never reached */ } /* No confirmation data available in SPL yet. Hardcode bootmode */ diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c index 165c052..c53671a 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c @@ -26,7 +26,6 @@ #include <asm/arch/clock.h> #include <asm/arch/dram.h> #include <asm/arch/prcm.h> -#include <linux/kconfig.h> static const struct dram_para dram_para = { .clock = CONFIG_DRAM_CLK, diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c index ebba438..fa1620c 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c @@ -14,7 +14,6 @@ #include <asm/arch/clock.h> #include <asm/arch/dram.h> #include <asm/arch/prcm.h> -#include <linux/kconfig.h> /* PLL runs at 2x dram-clk, controller runs at PLL / 4 (dram-clk / 2) */ #define DRAM_CLK_MUL 2 diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S index d4cb51e..4ff46e4 100644 --- a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S +++ b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S @@ -18,6 +18,8 @@ */ #include <config.h> + +#include <asm/arch-armv7/generictimer.h> #include <asm/gic.h> #include <asm/macro.h> #include <asm/psci.h> @@ -43,26 +45,6 @@ #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 -.macro timer_wait reg, ticks - @ Program CNTP_TVAL - movw \reg, #(\ticks & 0xffff) - movt \reg, #(\ticks >> 16) - mcr p15, 0, \reg, c14, c2, 0 - isb - @ Enable physical timer, mask interrupt - mov \reg, #3 - mcr p15, 0, \reg, c14, c2, 1 - @ Poll physical timer until ISTATUS is on -1: isb - mrc p15, 0, \reg, c14, c2, 1 - ands \reg, \reg, #4 - bne 1b - @ Disable timer - mov \reg, #0 - mcr p15, 0, \reg, c14, c2, 1 - isb -.endm - .globl psci_fiq_enter psci_fiq_enter: push {r0-r12} diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun7i.S b/arch/arm/cpu/armv7/sunxi/psci_sun7i.S index bbfeec8..e15d587 100644 --- a/arch/arm/cpu/armv7/sunxi/psci_sun7i.S +++ b/arch/arm/cpu/armv7/sunxi/psci_sun7i.S @@ -18,6 +18,8 @@ */ #include <config.h> + +#include <asm/arch-armv7/generictimer.h> #include <asm/gic.h> #include <asm/macro.h> #include <asm/psci.h> @@ -43,26 +45,6 @@ #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 -.macro timer_wait reg, ticks - @ Program CNTP_TVAL - movw \reg, #(\ticks & 0xffff) - movt \reg, #(\ticks >> 16) - mcr p15, 0, \reg, c14, c2, 0 - isb - @ Enable physical timer, mask interrupt - mov \reg, #3 - mcr p15, 0, \reg, c14, c2, 1 - @ Poll physical timer until ISTATUS is on -1: isb - mrc p15, 0, \reg, c14, c2, 1 - ands \reg, \reg, #4 - bne 1b - @ Disable timer - mov \reg, #0 - mcr p15, 0, \reg, c14, c2, 1 - isb -.endm - .globl psci_fiq_enter psci_fiq_enter: push {r0-r12} diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c index b07d67f..4d63a74 100644 --- a/arch/arm/cpu/armv7/sunxi/usb_phy.c +++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c @@ -44,6 +44,7 @@ static struct sunxi_usb_phy { int usb_rst_mask; int gpio_vbus; int gpio_vbus_det; + int gpio_id_det; int id; int init_count; int power_on_count; @@ -82,6 +83,14 @@ static int get_vbus_detect_gpio(int index) return -EINVAL; } +static int get_id_detect_gpio(int index) +{ + switch (index) { + case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET); + } + return -EINVAL; +} + static void usb_phy_write(struct sunxi_usb_phy *phy, int addr, int data, int len) { @@ -228,10 +237,8 @@ int sunxi_usb_phy_vbus_detect(int index) struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; int err, retries = 3; - if (phy->gpio_vbus_det < 0) { - eprintf("Error: invalid vbus detection pin\n"); + if (phy->gpio_vbus_det < 0) return phy->gpio_vbus_det; - } err = gpio_get_value(phy->gpio_vbus_det); /* @@ -247,6 +254,16 @@ int sunxi_usb_phy_vbus_detect(int index) return err; } +int sunxi_usb_phy_id_detect(int index) +{ + struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; + + if (phy->gpio_id_det < 0) + return phy->gpio_id_det; + + return gpio_get_value(phy->gpio_id_det); +} + int sunxi_usb_phy_probe(void) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; @@ -275,6 +292,18 @@ int sunxi_usb_phy_probe(void) if (ret) return ret; } + + phy->gpio_id_det = get_id_detect_gpio(i); + if (phy->gpio_id_det >= 0) { + ret = gpio_request(phy->gpio_id_det, "usb_id_det"); + if (ret) + return ret; + ret = gpio_direction_input(phy->gpio_id_det); + if (ret) + return ret; + sunxi_gpio_set_pull(phy->gpio_id_det, + SUNXI_GPIO_PULL_UP); + } } setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); @@ -298,6 +327,9 @@ int sunxi_usb_phy_remove(void) if (phy->gpio_vbus_det >= 0) gpio_free(phy->gpio_vbus_det); + + if (phy->gpio_id_det >= 0) + gpio_free(phy->gpio_id_det); } return 0; diff --git a/arch/arm/cpu/armv7m/stm32f4/clock.c b/arch/arm/cpu/armv7m/stm32f4/clock.c index 2eded1f..d520a13 100644 --- a/arch/arm/cpu/armv7m/stm32f4/clock.c +++ b/arch/arm/cpu/armv7m/stm32f4/clock.c @@ -92,7 +92,20 @@ struct pll_psc { #error "CONFIG_STM32_HSE_HZ not defined!" #else #if (CONFIG_STM32_HSE_HZ == 8000000) -struct pll_psc pll_psc_168 = { +#if (CONFIG_SYS_CLK_FREQ == 180000000) +/* 180 MHz */ +struct pll_psc sys_pll_psc = { + .pll_m = 8, + .pll_n = 360, + .pll_p = 2, + .pll_q = 8, + .ahb_psc = AHB_PSC_1, + .apb1_psc = APB_PSC_4, + .apb2_psc = APB_PSC_2 +}; +#else +/* default 168 MHz */ +struct pll_psc sys_pll_psc = { .pll_m = 8, .pll_n = 336, .pll_p = 2, @@ -101,6 +114,7 @@ struct pll_psc pll_psc_168 = { .apb1_psc = APB_PSC_4, .apb2_psc = APB_PSC_2 }; +#endif #else #error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" #endif @@ -122,19 +136,19 @@ int configure_clocks(void) while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) ; - /* Enable high performance mode, System frequency up to 168 MHz */ + /* Enable high performance mode, System frequency up to 180 MHz */ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); setbits_le32(&STM32_RCC->cfgr, (( - pll_psc_168.ahb_psc << RCC_CFGR_HPRE_SHIFT) - | (pll_psc_168.apb1_psc << RCC_CFGR_PPRE1_SHIFT) - | (pll_psc_168.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); - - writel(pll_psc_168.pll_m - | (pll_psc_168.pll_n << RCC_PLLCFGR_PLLN_SHIFT) - | (((pll_psc_168.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) - | (pll_psc_168.pll_q << RCC_PLLCFGR_PLLQ_SHIFT), + sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT) + | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT) + | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); + + writel(sys_pll_psc.pll_m + | (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT) + | (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) + | (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT), &STM32_RCC->pllcfgr); setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC); diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index dee5e25..6466ebb 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -16,4 +16,4 @@ obj-y += tlb.o obj-y += transition.o obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/ -obj-$(CONFIG_TARGET_XILINX_ZYNQMP) += zynqmp/ +obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/ diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index c5ec529..c22f7b6 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -25,9 +25,9 @@ void set_pgtable_section(u64 *page_table, u64 index, u64 section, /* to activate the MMU we need to set up virtual memory */ static void mmu_setup(void) { - int i, j, el; bd_t *bd = gd->bd; - u64 *page_table = (u64 *)gd->arch.tlb_addr; + u64 *page_table = (u64 *)gd->arch.tlb_addr, i, j; + int el; /* Setup an identity-mapping for all spaces */ for (i = 0; i < (PGTABLE_SIZE >> 3); i++) { @@ -139,6 +139,37 @@ int dcache_status(void) return (get_sctlr() & CR_C) != 0; } +u64 *__weak arch_get_page_table(void) { + puts("No page table offset defined\n"); + + return NULL; +} + +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, + enum dcache_option option) +{ + u64 *page_table = arch_get_page_table(); + u64 upto, end; + + if (page_table == NULL) + return; + + end = ALIGN(start + size, (1 << MMU_SECTION_SHIFT)) >> + MMU_SECTION_SHIFT; + start = start >> MMU_SECTION_SHIFT; + for (upto = start; upto < end; upto++) { + page_table[upto] &= ~PMD_ATTRINDX_MASK; + page_table[upto] |= PMD_ATTRINDX(option); + } + asm volatile("dsb sy"); + __asm_invalidate_tlb_all(); + asm volatile("dsb sy"); + asm volatile("isb"); + start = start << MMU_SECTION_SHIFT; + end = end << MMU_SECTION_SHIFT; + flush_dcache_range(start, end); + asm volatile("dsb sy"); +} #else /* CONFIG_SYS_DCACHE_OFF */ void invalidate_dcache_all(void) @@ -170,6 +201,11 @@ int dcache_status(void) return 0; } +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, + enum dcache_option option) +{ +} + #endif /* CONFIG_SYS_DCACHE_OFF */ #ifndef CONFIG_SYS_ICACHE_OFF diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index 37f07fb..3c15479 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -9,6 +9,31 @@ Freescale LayerScape with Chassis Generation 3 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3, for example LS2085A. +DDR Layout +============ +Entire DDR region splits into two regions. + - Region 1 is at address 0x8000_0000 to 0xffff_ffff. + - Region 2 is at 0x80_8000_0000 to the top of total memory, + for example 16GB, 0x83_ffff_ffff. + +All DDR memory is marked as cache-enabled. + +When MC and Debug server is enabled, they carve 512MB away from the high +end of DDR. For example, if the total DDR is 16GB, it shrinks to 15.5GB +with MC and Debug server enabled. Linux only sees 15.5GB. + +The reserved 512MB layout looks like + + +---------------+ <-- top/end of memory + | 256MB | debug server + +---------------+ + | 256MB | MC + +---------------+ + | ... | + +MC requires the memory to be aligned with 512MB, so even debug server is +not enabled, 512MB is reserved, not 256MB. + Flash Layout ============ diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c index 6714577..d02c0be 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c @@ -9,6 +9,7 @@ #include <asm/system.h> #include <asm/armv8/mmu.h> #include <asm/io.h> +#include <asm/arch-fsl-lsch3/soc.h> #include <asm/arch-fsl-lsch3/immap_lsch3.h> #include <fsl_debug_server.h> #include <fsl-mc/fsl_mc.h> @@ -22,6 +23,35 @@ DECLARE_GLOBAL_DATA_PTR; +static struct cpu_type cpu_type_list[] = { +#ifdef CONFIG_LS2085A + CPU_TYPE_ENTRY(LS2085, LS2085, 8), + CPU_TYPE_ENTRY(LS2080, LS2080, 8), + CPU_TYPE_ENTRY(LS2045, LS2045, 4), +#endif +}; + +void cpu_name(char *name) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + unsigned int i, svr, ver; + + svr = in_le32(&gur->svr); + ver = SVR_SOC_VER(svr); + + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) { + strcpy(name, cpu_type_list[i].name); + + if (IS_E_PROCESSOR(svr)) + strcat(name, "E"); + break; + } + + if (i == ARRAY_SIZE(cpu_type_list)) + strcpy(name, "unknown"); +} + #ifndef CONFIG_SYS_DCACHE_OFF /* * To start MMU before DDR is available, we create MMU table in SRAM. @@ -52,6 +82,12 @@ DECLARE_GLOBAL_DATA_PTR; TCR_ORGN_NC | \ TCR_IRGN_NC | \ TCR_T0SZ(LSCH3_VA_BITS)) +#define LSCH3_TCR_FINAL (TCR_TG0_4K | \ + TCR_EL2_PS_40BIT | \ + TCR_SHARED_OUTER | \ + TCR_ORGN_WBWA | \ + TCR_IRGN_WBWA | \ + TCR_T0SZ(LSCH3_VA_BITS)) /* * Final MMU @@ -236,21 +272,8 @@ static inline void final_mmu_setup(void) /* point TTBR to the new table */ el = current_el(); - asm volatile("dsb sy"); - if (el == 1) { - asm volatile("msr ttbr0_el1, %0" - : : "r" ((u64)level0_table) : "memory"); - } else if (el == 2) { - asm volatile("msr ttbr0_el2, %0" - : : "r" ((u64)level0_table) : "memory"); - } else if (el == 3) { - asm volatile("msr ttbr0_el3, %0" - : : "r" ((u64)level0_table) : "memory"); - } else { - hang(); - } - asm volatile("isb"); - + set_ttbr_tcr_mair(el, (u64)level0_table, LSCH3_TCR_FINAL, + MEMORY_ATTRIBUTES); /* * MMU is already enabled, just need to invalidate TLB to load the * new table. The new table is compatible with the current table, if @@ -380,6 +403,13 @@ int print_cpuinfo(void) unsigned int i, core; u32 type; + puts("SoC: "); + + cpu_name(buf); + printf(" %s (0x%x)\n", buf, in_le32(&gur->svr)); + + memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); + get_sys_info(&sysinfo); puts("Clock Configuration:"); for_each_cpu(i, core, cpu_numcores(), cpu_mask()) { @@ -394,8 +424,8 @@ int print_cpuinfo(void) } printf("\n Bus: %-4s MHz ", strmhz(buf, sysinfo.freq_systembus)); - printf("DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus)); - printf(" DP-DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus2)); + printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus)); + printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2)); puts("\n"); /* Display the RCW, so that no one gets confused as to what RCW diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c index d370023..567c419 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c @@ -7,6 +7,7 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/arch-fsl-lsch3/fdt.h> #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> #endif @@ -58,6 +59,113 @@ void ft_fixup_cpu(void *blob) } #endif +/* + * the burden is on the the caller to not request a count + * exceeding the bounds of the stream_ids[] array + */ +void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt) +{ + int i; + + if (count > max_cnt) { + printf("\n%s: ERROR: max per-device stream ID count exceed\n", + __func__); + return; + } + + for (i = 0; i < count; i++) + stream_ids[i] = start_id++; +} + +/* + * This function updates the mmu-masters property on the SMMU + * node as per the SMMU binding-- phandle and list of stream IDs + * for each MMU master. + */ +void append_mmu_masters(void *blob, const char *smmu_path, + const char *master_name, u32 *stream_ids, int count) +{ + u32 phandle; + int smmu_nodeoffset; + int master_nodeoffset; + int i; + + /* get phandle of mmu master device */ + master_nodeoffset = fdt_path_offset(blob, master_name); + if (master_nodeoffset < 0) { + printf("\n%s: ERROR: master not found\n", __func__); + return; + } + phandle = fdt_get_phandle(blob, master_nodeoffset); + if (!phandle) { /* if master has no phandle, create one */ + phandle = fdt_create_phandle(blob, master_nodeoffset); + if (!phandle) { + printf("\n%s: ERROR: unable to create phandle\n", + __func__); + return; + } + } + + /* append it to mmu-masters */ + smmu_nodeoffset = fdt_path_offset(blob, smmu_path); + if (fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters", + phandle) < 0) { + printf("\n%s: ERROR: unable to update SMMU node\n", __func__); + return; + } + + /* for each stream ID, append to mmu-masters */ + for (i = 0; i < count; i++) { + fdt_appendprop_u32(blob, smmu_nodeoffset, "mmu-masters", + stream_ids[i]); + } + + /* fix up #stream-id-cells with stream ID count */ + if (fdt_setprop_u32(blob, master_nodeoffset, "#stream-id-cells", + count) < 0) + printf("\n%s: ERROR: unable to update #stream-id-cells\n", + __func__); +} + + +/* + * The info below summarizes how streamID partitioning works + * for ls2085a and how it is conveyed to the OS via the device tree. + * + * -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA) + * -all legacy devices get a unique ICID assigned and programmed in + * their AMQR registers by u-boot + * -u-boot updates the hardware device tree with streamID properties + * for each platform/legacy device (smmu-masters property) + * + * -PCIe + * -for each PCI controller that is active (as per RCW settings), + * u-boot will allocate a range of ICID and convey that to Linux via + * the device tree (smmu-masters property) + * + * -DPAA2 + * -u-boot will allocate a range of ICIDs to be used by the Management + * Complex for containers and will set these values in the MC DPC image. + * -the MC is responsible for allocating and setting up ICIDs + * for all DPAA2 devices. + * + */ +static void fdt_fixup_smmu(void *blob) +{ + int nodeoffset; + + nodeoffset = fdt_path_offset(blob, "/iommu@5000000"); + if (nodeoffset < 0) { + printf("\n%s: WARNING: no SMMU node found\n", __func__); + return; + } + + /* fixup for all PCI controllers */ +#ifdef CONFIG_PCI + fdt_fixup_smmu_pcie(blob); +#endif +} + void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_MP @@ -69,7 +177,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); #endif +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + #if defined(CONFIG_FSL_ESDHC) fdt_fixup_esdhc(blob, bd); #endif + + fdt_fixup_smmu(blob); } diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c index cac4f92..d9f137c 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/speed.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c @@ -180,6 +180,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk) switch (clk) { case MXC_I2C_CLK: return get_bus_freq(0) / 2; + case MXC_DSPI_CLK: + return get_bus_freq(0) / 2; default: printf("Unsupported clock\n"); } diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index e5f2766..e70bed4 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -115,18 +115,18 @@ apply_a57_core_errata: #ifdef CONFIG_ARM_ERRATA_828024 mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ /* Disable non-allocate hint of w-b-n-a memory type */ - mov x0, #0x1 << 49 + orr x0, x0, #1 << 49 /* Disable write streaming no L1-allocate threshold */ - mov x0, #0x3 << 25 + orr x0, x0, #3 << 25 /* Disable write streaming no-allocate threshold */ - mov x0, #0x3 << 27 + orr x0, x0, #3 << 27 msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ #endif #ifdef CONFIG_ARM_ERRATA_826974 mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ /* Disable speculative load execution ahead of a DMB */ - mov x0, #0x1 << 59 + orr x0, x0, #1 << 59 msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ #endif diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig new file mode 100644 index 0000000..c8fcfb6 --- /dev/null +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig @@ -0,0 +1,23 @@ +if ARCH_ZYNQMP + +choice + prompt "Xilinx ZynqMP board select" + +config TARGET_ZYNQMP_EP + bool "ZynqMP EP Board" + +endchoice + +config SYS_BOARD + default "zynqmp" + +config SYS_VENDOR + default "xilinx" + +config SYS_SOC + default "zynqmp" + +config SYS_CONFIG_NAME + default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP + +endif diff --git a/arch/arm/cpu/armv8/zynqmp/Makefile b/arch/arm/cpu/armv8/zynqmp/Makefile index efab5ea..d0ed222 100644 --- a/arch/arm/cpu/armv8/zynqmp/Makefile +++ b/arch/arm/cpu/armv8/zynqmp/Makefile @@ -8,3 +8,4 @@ obj-y += clk.o obj-y += cpu.o obj-$(CONFIG_MP) += mp.o +obj-y += slcr.o diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c index 17e32a7..dcb80b5 100644 --- a/arch/arm/cpu/armv8/zynqmp/mp.c +++ b/arch/arm/cpu/armv8/zynqmp/mp.c @@ -216,12 +216,7 @@ int cpu_release(int nr, int argc, char * const argv[]) printf("R5 lockstep mode\n"); set_r5_tcm_mode(LOCK); set_r5_halt_mode(HALT, LOCK); - - if (boot_addr == 0) - set_r5_start(0); - else - set_r5_start(1); - + set_r5_start(boot_addr); enable_clock_r5(); release_r5_reset(LOCK); set_r5_halt_mode(RELEASE, LOCK); diff --git a/arch/arm/cpu/armv8/zynqmp/slcr.c b/arch/arm/cpu/armv8/zynqmp/slcr.c new file mode 100644 index 0000000..713e9a6 --- /dev/null +++ b/arch/arm/cpu/armv8/zynqmp/slcr.c @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2014 - 2015 Xilinx, Inc. + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clk.h> + +/* + * zynq_slcr_mio_get_status - Get the status of MIO peripheral. + * + * @peri_name: Name of the peripheral for checking MIO status + * @get_pins: Pointer to array of get pin for this peripheral + * @num_pins: Number of pins for this peripheral + * @mask: Mask value + * @check_val: Required check value to get the status of periph + */ +struct zynq_slcr_mio_get_status { + const char *peri_name; + const int *get_pins; + int num_pins; + u32 mask; + u32 check_val; +}; + +static const struct zynq_slcr_mio_get_status mio_periphs[] = { +}; + +/* + * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral. + * + * @periph: Name of the peripheral + * + * Returns count to indicate the number of pins configured for the + * given @periph. + */ +int zynq_slcr_get_mio_pin_status(const char *periph) +{ + const struct zynq_slcr_mio_get_status *mio_ptr; + int val, i, j; + int mio = 0; + + for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) { + if (strcmp(periph, mio_periphs[i].peri_name) == 0) { + mio_ptr = &mio_periphs[i]; + for (j = 0; j < mio_ptr->num_pins; j++) { + val = readl(&slcr_base->mio_pin + [mio_ptr->get_pins[j]]); + if ((val & mio_ptr->mask) == mio_ptr->check_val) + mio++; + } + break; + } + } + + return mio; +} diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds index a8be204..c5b4f7c 100644 --- a/arch/arm/cpu/u-boot-spl.lds +++ b/arch/arm/cpu/u-boot-spl.lds @@ -32,17 +32,17 @@ SECTIONS } . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*_i2c_*))); - } - - . = .; #ifdef CONFIG_SPL_DM .u_boot_list : { KEEP(*(SORT(.u_boot_list_*_driver_*))); KEEP(*(SORT(.u_boot_list_*_uclass_*))); } #endif + . = .; + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*_i2c_*))); + } + . = ALIGN(4); __image_copy_end = .; @@ -66,7 +66,7 @@ SECTIONS . = ALIGN(4); __bss_end = .; } - + __bss_size = __bss_end - __bss_start; .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 19e1de6..ba63553 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -32,7 +32,8 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra114-dalmore.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ - tegra124-venice2.dtb + tegra124-venice2.dtb \ + tegra210-p2571.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ @@ -45,6 +46,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-microzed.dtb \ zynq-picozed.dtb \ zynq-zc770-xm010.dtb \ + zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb @@ -57,6 +59,8 @@ dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \ ls1021a-twr.dtb +dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2085a-qds.dtb \ + fsl-ls2085a-rdb.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ diff --git a/arch/arm/dts/fsl-ls2085a-qds.dts b/arch/arm/dts/fsl-ls2085a-qds.dts new file mode 100644 index 0000000..4477e54 --- /dev/null +++ b/arch/arm/dts/fsl-ls2085a-qds.dts @@ -0,0 +1,53 @@ +/* + * Freescale ls2085a QDS board device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a QDS Board"; + compatible = "fsl,ls2085a-qds", "fsl,ls2085a"; + + aliases { + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2085a-rdb.dts b/arch/arm/dts/fsl-ls2085a-rdb.dts new file mode 100644 index 0000000..25278df --- /dev/null +++ b/arch/arm/dts/fsl-ls2085a-rdb.dts @@ -0,0 +1,35 @@ +/* + * Freescale ls2085a RDB board device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a RDB Board"; + compatible = "fsl,ls2085a-rdb", "fsl,ls2085a"; + + aliases { + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2085a.dtsi b/arch/arm/dts/fsl-ls2085a.dtsi new file mode 100644 index 0000000..96404c5 --- /dev/null +++ b/arch/arm/dts/fsl-ls2085a.dtsi @@ -0,0 +1,129 @@ +/* + * Freescale ls2085a SOC common device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + compatible = "fsl,ls2085a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; + + dspi: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + num-cs = <6>; + }; +}; diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index 8c1bca7..514f159 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -52,14 +52,6 @@ model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; - aliases { - serial0 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - i2c_lcd: i2c@0 { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; @@ -227,12 +219,6 @@ status = "okay"; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - &usbphy { usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 7abd0ae..5cd2e92 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -332,6 +332,24 @@ #size-cells = <0>; }; + ehci0: usb@01c1a000 { + compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + status = "disabled"; + }; + pio: pinctrl@01c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index 8667033..da16343 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -61,6 +61,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -109,6 +113,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &pio { mmc0_cd_pin_q8h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; diff --git a/arch/arm/dts/tegra210-p2571.dts b/arch/arm/dts/tegra210-p2571.dts new file mode 100644 index 0000000..de35bba --- /dev/null +++ b/arch/arm/dts/tegra210-p2571.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA P2571"; + compatible = "nvidia,p2571", "nvidia,tegra210"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c@0,7000d000"; + i2c1 = "/i2c@0,7000c000"; + i2c2 = "/i2c@0,7000c400"; + i2c3 = "/i2c@0,7000c500"; + i2c4 = "/i2c@0,7000c700"; + i2c5 = "/i2c@0,7000d100"; + sdhci0 = "/sdhci@0,700b0600"; + sdhci1 = "/sdhci@0,700b0000"; + spi0 = "/spi@0,7000d400"; + spi1 = "/spi@0,7000da00"; + spi2 = "/spi@0,70410000"; + usb0 = "/usb@0,7d000000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@0,7000d100 { + status = "okay"; + clock-frequency = <400000>; + }; + + spi@0,7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + spi@0,70410000 { + status = "okay"; + spi-max-frequency = <24000000>; + }; + + sdhci@0,700b0000 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + }; + + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + }; + + usb@0,7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; diff --git a/arch/arm/dts/tegra210.dtsi b/arch/arm/dts/tegra210.dtsi new file mode 100644 index 0000000..f3874a1 --- /dev/null +++ b/arch/arm/dts/tegra210.dtsi @@ -0,0 +1,283 @@ +#include <dt-bindings/clock/tegra210-car.h> +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> + +#include "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra210"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@0,50041000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x50041000 0x0 0x1000>, + <0x0 0x50042000 0x0 0x2000>, + <0x0 0x50044000 0x0 0x2000>, + <0x0 0x50046000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + tegra_car: clock@0,60006000 { + compatible = "nvidia,tegra210-car"; + reg = <0x0 0x60006000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpio: gpio@0,6000d000 { + compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio"; + reg = <0x0 0x6000d000 0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + i2c@0,7000c000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c000 0x0 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + status = "disabled"; + }; + + i2c@0,7000c400 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c400 0x0 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + status = "disabled"; + }; + + i2c@0,7000c500 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c500 0x0 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + status = "disabled"; + }; + + i2c@0,7000c700 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c700 0x0 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + status = "disabled"; + }; + + i2c@0,7000d000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d000 0x0 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; + + i2c@0,7000d100 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d100 0x0 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; + + uarta: serial@0,70006000 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTA>; + resets = <&tegra_car 6>; + reset-names = "serial"; + status = "disabled"; + }; + + uartb: serial@0,70006040 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006040 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTB>; + resets = <&tegra_car 7>; + reset-names = "serial"; + status = "disabled"; + }; + + uartc: serial@0,70006200 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006200 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTC>; + resets = <&tegra_car 55>; + reset-names = "serial"; + status = "disabled"; + }; + + uartd: serial@0,70006300 { + compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x70006300 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_UARTD>; + resets = <&tegra_car 65>; + reset-names = "serial"; + status = "disabled"; + }; + + spi@0,7000d400 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d400 0x0 0x200>; + interrupts = <0 59 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC1>; + resets = <&tegra_car 41>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,7000d600 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d600 0x0 0x200>; + interrupts = <0 82 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,7000d800 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000d800 0x0 0x200>; + interrupts = <0 83 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC3>; + resets = <&tegra_car 46>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,7000da00 { + compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; + reg = <0x0 0x7000da00 0x0 0x200>; + interrupts = <0 93 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_SBC4>; + resets = <&tegra_car 68>; + reset-names = "spi"; + status = "disabled"; + }; + + spi@0,70410000 { + compatible = "nvidia,tegra210-qspi"; + reg = <0x0 0x70410000 0x0 0x1000>; + interrupts = <0 10 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 211>; + status = "disabled"; + }; + + padctl: padctl@0,7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + #phy-cells = <1>; + }; + + sdhci@0,700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0200 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0200 0x0 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC2>; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0400 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0400 0x0 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC3>; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdhci@0,700b0600 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0600 0x0 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC4>; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disabled"; + }; + + usb@0,7d000000 { + compatible = "nvidia,tegra210-ehci"; + reg = <0x0 0x7d000000 0x0 0x4000>; + interrupts = <0 20 0x04>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USBD>; + resets = <&tegra_car 22>; + reset-names = "usb"; + status = "disabled"; + }; + + usb@0,7d004000 { + compatible = "nvidia,tegra210-ehci"; + reg = <0x0 0x7d004000 0x0 0x4000>; + interrupts = < 53 >; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USB2>; + resets = <&tegra_car 58>; + reset-names = "usb"; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi index 2fa42a6..5e29436 100644 --- a/arch/arm/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi @@ -129,6 +129,15 @@ status = "disabled"; }; + i2c4: i2c@58600000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58600000 0x40>; + clock-frequency = <400000>; + status = "okay"; + }; + system-bus-controller-misc@59800000 { compatible = "socionext,uniphier-system-bus-controller-misc", "syscon"; diff --git a/arch/arm/dts/uniphier-ref-daughter.dtsi b/arch/arm/dts/uniphier-ref-daughter.dtsi index 84b2206..b8960fd 100644 --- a/arch/arm/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/dts/uniphier-ref-daughter.dtsi @@ -8,7 +8,7 @@ &i2c0 { eeprom { - compatible = "i2c-eeprom"; + compatible = "microchip,24lc128", "i2c-eeprom"; reg = <0x50>; u-boot,i2c-offset-len = <2>; }; diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 9207159..0b62cb0 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -2,7 +2,7 @@ * Xilinx Zynq 7000 DTSI * Describes the hardware common to all Zynq 7000-based boards. * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx * * SPDX-License-Identifier: GPL-2.0+ */ @@ -21,11 +21,11 @@ reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 333334 1000000 - 222223 1000000 >; }; @@ -44,14 +44,65 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; - amba { + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + amba: amba { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&intc>; ranges; - i2c0: zynq-i2c@e0004000 { + adc: adc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&intc>; + clocks = <&clkc 12>; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + gpio0: gpio@e000a000 { + compatible = "xlnx,zynq-gpio-1.0"; + #gpio-cells = <2>; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; + + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 38>; @@ -62,7 +113,7 @@ #size-cells = <0>; }; - i2c1: zynq-i2c@e0005000 { + i2c1: i2c@e0005000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 39>; @@ -76,41 +127,46 @@ intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xF8F01000 0x1000>, <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; + interrupts = <0 2 4>; arm,data-latency = <3 2 2>; arm,tag-latency = <2 2 2>; cache-unified; cache-level = <2>; }; - uart0: uart@e0000000 { - compatible = "xlnx,xuartps"; + mc: memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + }; + + uart0: serial@e0000000 { + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; }; - uart1: uart@e0001000 { - compatible = "xlnx,xuartps"; + uart1: serial@e0001000 { + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; }; spi0: spi@e0006000 { - compatible = "xlnx,zynq-spi"; + compatible = "xlnx,zynq-spi-r1p6"; reg = <0xe0006000 0x1000>; status = "disabled"; interrupt-parent = <&intc>; @@ -123,7 +179,7 @@ }; spi1: spi@e0007000 { - compatible = "xlnx,zynq-spi"; + compatible = "xlnx,zynq-spi-r1p6"; reg = <0xe0007000 0x1000>; status = "disabled"; interrupt-parent = <&intc>; @@ -136,24 +192,28 @@ }; gem0: ethernet@e000b000 { - compatible = "cdns,gem"; - reg = <0xe000b000 0x4000>; + compatible = "cdns,zynq-gem", "cdns,gem"; + reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; gem1: ethernet@e000c000 { - compatible = "cdns,gem"; - reg = <0xe000c000 0x4000>; + compatible = "cdns,zynq-gem", "cdns,gem"; + reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -163,7 +223,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -176,13 +236,12 @@ slcr: slcr@f8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,zynq-slcr", "syscon"; + compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; - ps-clk-frequency = <33333333>; fclk-enable = <0>; clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", @@ -197,6 +256,35 @@ "dbg_trc", "dbg_apb"; reg = <0x100 0x100>; }; + + pinctrl0: pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + }; + }; + + dmac_s: dmac@f8003000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xf8003000 0x1000>; + interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; + interrupts = <0 13 4>, + <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, + <0 40 4>, <0 41 4>, + <0 42 4>, <0 43 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <4>; + clocks = <&clkc 27>; + clock-names = "apb_pclk"; + }; + + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; }; global_timer: timer@f8f00200 { @@ -207,27 +295,57 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; - interrupts = < 0 37 4 0 38 4 0 39 4 >; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; interrupts = < 1 13 0x301 >; compatible = "arm,cortex-a9-twd-timer"; reg = < 0xf8f00600 0x20 >; clocks = <&clkc 4>; } ; + + usb0: usb@e0002000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 28>; + interrupt-parent = <&intc>; + interrupts = <0 21 4>; + reg = <0xe0002000 0x1000>; + phy_type = "ulpi"; + }; + + usb1: usb@e0003000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 29>; + interrupt-parent = <&intc>; + interrupts = <0 44 4>; + reg = <0xe0003000 0x1000>; + phy_type = "ulpi"; + }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "cdns,wdt-r1p2"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + timeout-sec = <10>; + }; }; }; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index 4fa0b00..6691a8d 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -1,7 +1,8 @@ /* * Xilinx ZC702 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,380 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC702 Board"; + model = "Zynq ZC702 Development Board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw14 { + label = "sw14"; + gpios = <&gpio0 12 0>; + linux,code = <108>; /* down */ + gpio-key,wakeup; + autorepeat; + }; + sw13 { + label = "sw13"; + gpios = <&gpio0 14 0>; + linux,code = <103>; /* up */ + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&amba { + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + }; +}; + +&can0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "ti,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "ti,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "ti,ucd9248"; + reg = <54>; + }; + }; + }; +}; + +&pinctrl0 { + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO46"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO47"; + bias-disable; + }; + }; + + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7", "MIO8"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts index 2a80195..cf7bce4 100644 --- a/arch/arm/dts/zynq-zc706.dts +++ b/arch/arm/dts/zynq-zc706.dts @@ -1,7 +1,8 @@ /* * Xilinx ZC706 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,301 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC706 Board"; + model = "Zynq ZC706 Development Board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + ucd90120@65 { + compatible = "ti,ucd90120"; + reg = <0x65>; + }; + }; + }; +}; + +&pinctrl0 { + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + low-power-enable; + bias-disable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO46", "MIO47"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_14_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_14_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index bf107e3..da3a182 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -1,7 +1,7 @@ /* * Xilinx ZC770 XM010 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2013 - 2015 Xilinx, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,20 +9,85 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC770 XM010 Board"; compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; serial0 = &uart1; - spi1 = &spi1; + spi0 = &spi1; }; - memory { + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart1; + stdout-path = &uart1; + }; + + memory@0 { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; &spi1 { status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + flash@0 { + compatible = "sst25wf080"; + reg = <1>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@test { + label = "spi-flash"; + reg = <0x0 0x100000>; + }; + }; +}; + +&can0 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; + }; + +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; }; diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts new file mode 100644 index 0000000..d38c820 --- /dev/null +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -0,0 +1,65 @@ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/dts-v1/; +#include "zynq-7000.dtsi" +/ { + compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c1; + serial0 = &uart1; + spi0 = &spi0; + }; + + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart1; + stdout-path = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&can0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +}; diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 127a661..f8cc503 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -1,7 +1,7 @@ /* * Xilinx ZC770 XM012 board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2013 - 2015 Xilinx, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +9,58 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC770 XM012 Board"; compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; serial0 = &uart1; + spi0 = &spi1; }; - memory { + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart1; + stdout-path = &uart1; + }; + + memory@0 { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&can1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + m24c02_eeprom@52 { + compatible = "at,24c02"; + reg = <0x52>; }; }; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index c61c7e7..436a8cd 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -9,15 +9,71 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC770 XM013 Board"; compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; aliases { + ethernet0 = &gem1; + i2c0 = &i2c1; serial0 = &uart0; + spi0 = &spi0; }; - memory { + chosen { + bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk"; + linux,stdout-path = &uart0; + stdout-path = &uart0; + }; + + memory@0 { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + eeprom: at25@0 { + at25,byte-len = <8192>; + at25,addr-mode = <2>; + at25,page-size = <32>; + + compatible = "atmel,at25"; + reg = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; }; }; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + si570: clock-generator@55 { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x55>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts index 70cc8a6..5762576 100644 --- a/arch/arm/dts/zynq-zed.dts +++ b/arch/arm/dts/zynq-zed.dts @@ -1,7 +1,8 @@ /* * Xilinx ZED board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,54 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZED Board"; + model = "Zynq Zed Development Board"; compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; }; diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts index 20e0386..10f7815 100644 --- a/arch/arm/dts/zynq-zybo.dts +++ b/arch/arm/dts/zynq-zybo.dts @@ -1,7 +1,8 @@ /* * Digilent ZYBO board DTS * - * Copyright (C) 2013 Xilinx, Inc. + * Copyright (C) 2011 - 2015 Xilinx + * Copyright (C) 2012 National Instruments Corp. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,15 +10,44 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZYBO Board"; - compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000"; + model = "Zynq ZYBO Development Board"; + compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; aliases { + ethernet0 = &gem0; serial0 = &uart1; }; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + +}; + +&clkc { + ps-clk-frequency = <50000000>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; }; diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index e5c0b0d..47962da 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -33,4 +33,15 @@ #define AM4372_BOARD_VERSION_END SRAM_SCRATCH_SPACE_ADDR + 0x14 #define QSPI_BASE 0x47900000 #endif + +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int reserved; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index e756418..4ed8597 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -7,51 +7,65 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#if defined(CONFIG_TI816X) -#define BOOT_DEVICE_XIP 2 -#define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_MMC1 6 -#define BOOT_DEVICE_MMC2 5 +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_MMC2_2 0xFF + +#if defined(CONFIG_TI814X) +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x05 +#define BOOT_DEVICE_NAND_I2C 0x06 +#define BOOT_DEVICE_MMC2 0x08 /* ROM only supports 2nd instance. */ +#define BOOT_DEVICE_MMC1 0x09 +#define BOOT_DEVICE_SPI 0x15 +#define BOOT_DEVICE_UART 0x41 +#define BOOT_DEVICE_USBETH 0x44 +#define BOOT_DEVICE_CPGMAC 0x46 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 +#elif defined(CONFIG_TI816X) +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAD 0x04 +#define BOOT_DEVICE_MMC2 0x05 /* ROM only supports 2nd instance. */ +#define BOOT_DEVICE_MMC1 0x06 #define BOOT_DEVICE_UART 0x43 -#elif defined(CONFIG_AM43XX) -#define BOOT_DEVICE_NOR 1 -#define BOOT_DEVICE_NAND 5 -#define BOOT_DEVICE_MMC1 7 -#define BOOT_DEVICE_MMC2 8 -#define BOOT_DEVICE_SPI 10 -#define BOOT_DEVICE_USB 13 -#define BOOT_DEVICE_UART 65 -#define BOOT_DEVICE_CPGMAC 71 -#else -#define BOOT_DEVICE_XIP 2 -#define BOOT_DEVICE_NAND 5 -#define BOOT_DEVICE_NAND_I2C 6 -#if defined(CONFIG_AM33XX) -#define BOOT_DEVICE_MMC1 8 -#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ -#elif defined(CONFIG_TI814X) -#define BOOT_DEVICE_MMC1 9 -#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */ -#endif -#define BOOT_DEVICE_SPI 11 -#define BOOT_DEVICE_UART 65 -#define BOOT_DEVICE_USBETH 68 -#define BOOT_DEVICE_CPGMAC 70 -#endif -#define BOOT_DEVICE_MMC2_2 0xFF +#define BOOT_DEVICE_USB 0x45 -#if defined(CONFIG_AM33XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 +#elif defined(CONFIG_AM33XX) +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x05 +#define BOOT_DEVICE_NAND_I2C 0x06 +#define BOOT_DEVICE_MMC1 0x08 +#define BOOT_DEVICE_MMC2 0x09 +#define BOOT_DEVICE_SPI 0x15 +#define BOOT_DEVICE_UART 0x41 +#define BOOT_DEVICE_USBETH 0x44 +#define BOOT_DEVICE_CPGMAC 0x46 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #elif defined(CONFIG_AM43XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define BOOT_DEVICE_NOR 0x01 +#define BOOT_DEVICE_NAND 0x05 +#define BOOT_DEVICE_MMC1 0x07 +#define BOOT_DEVICE_MMC2 0x08 +#define BOOT_DEVICE_SPI 0x0A +#define BOOT_DEVICE_UART 0x41 +#define BOOT_DEVICE_USB 0x45 +#define BOOT_DEVICE_CPGMAC 0x47 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 #ifdef CONFIG_SPL_USB_SUPPORT -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB #else -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif -#elif defined(CONFIG_TI81XX) -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 #endif + #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 7eacf27..91b614a 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -11,7 +11,6 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ #include <linux/mtd/omap_gpmc.h> -#include <asm/ti-common/sys_proto.h> #include <asm/arch/cpu.h> u32 get_cpu_rev(void); diff --git a/arch/arm/include/asm/arch-armv7/generictimer.h b/arch/arm/include/asm/arch-armv7/generictimer.h new file mode 100644 index 0000000..f402686 --- /dev/null +++ b/arch/arm/include/asm/arch-armv7/generictimer.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2013 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * Based on code by Carl van Schaik <carl@ok-labs.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _GENERICTIMER_H_ +#define _GENERICTIMER_H_ + +#ifdef __ASSEMBLY__ + +/* + * This macro provide a physical timer that can be used for delay in the code. + * The macro is moved from sunxi/psci_sun7i.S + * + * reg: is used in this macro. + * ticks: The freq is based on generic timer. + */ +.macro timer_wait reg, ticks + movw \reg, #(\ticks & 0xffff) + movt \reg, #(\ticks >> 16) + mcr p15, 0, \reg, c14, c2, 0 + isb + mov \reg, #3 + mcr p15, 0, \reg, c14, c2, 1 +1 : isb + mrc p15, 0, \reg, c14, c2, 1 + ands \reg, \reg, #4 + bne 1b + mov \reg, #0 + mcr p15, 0, \reg, c14, c2, 1 + isb +.endm + +#endif /* __ASSEMBLY__ */ + +#endif /* _GENERICTIMER_H_ */ diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h index 93ebf34..dbcc88c 100644 --- a/arch/arm/include/asm/arch-bcm281xx/sysmap.h +++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h @@ -27,4 +27,11 @@ #define SECWD2_BASE_ADDR 0x35002f40 #define TIMER_BASE_ADDR 0x3e00d000 +#define HSOTG_DCTL_OFFSET 0x00000804 +#define HSOTG_DCTL_SFTDISCON_MASK 0x00000002 + +#define HSOTG_CTRL_PHY_P1CTL_OFFSET 0x00000008 +#define HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK 0x00000002 +#define HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK 0x00000001 + #endif diff --git a/arch/arm/include/asm/arch-fsl-lsch3/clock.h b/arch/arm/include/asm/arch-fsl-lsch3/clock.h index 831af0b..62bc53c 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/clock.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/clock.h @@ -16,6 +16,7 @@ enum mxc_clock { MXC_UART_CLK, MXC_ESDHC_CLK, MXC_I2C_CLK, + MXC_DSPI_CLK, }; unsigned int mxc_get_clock(enum mxc_clock clk); diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h index ca8d38c..8675e91 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/config.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h @@ -137,6 +137,8 @@ #define DCFG_PORSR1 0x000 #define DCFG_PORSR1_RCW_SRC 0xff800000 #define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000 +#define DCFG_RCWSR13 0x130 +#define DCFG_RCWSR13_DSPI (0 << 8) #define DCFG_DCSR_BASE 0X700100000ULL #define DCFG_DCSR_PORCR1 0x000 diff --git a/arch/arm/include/asm/arch-fsl-lsch3/fdt.h b/arch/arm/include/asm/arch-fsl-lsch3/fdt.h new file mode 100644 index 0000000..21d20fb --- /dev/null +++ b/arch/arm/include/asm/arch-fsl-lsch3/fdt.h @@ -0,0 +1,10 @@ +/* + * Copyright 2015 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt); +void append_mmu_masters(void *blob, const char *smmu_path, + const char *master_name, u32 *stream_ids, int count); +void fdt_fixup_smmu_pcie(void *blob); diff --git a/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h b/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h new file mode 100644 index 0000000..5c94530 --- /dev/null +++ b/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h @@ -0,0 +1,64 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ +#ifndef __FSL_STREAM_ID_H +#define __FSL_STREAM_ID_H + +/* Stream IDs on ls2085a devices are not hardwired and are + * programmed by sw. There are a limited number of stream IDs + * available, and the partitioning of them is scenario dependent. + * This header defines the partitioning between legacy, PCI, + * and DPAA2 devices. + * + * This partitiong can be customized in this file depending + * on the specific hardware config-- e.g. perhaps not all + * PEX controllers are in use. + * + * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for + * each of the different bus masters. The relationship between + * the AMQ registers and stream IDs is defined in the table below: + * AMQ bit streamID bit + * --------------------------- + * PL[18] 9 + * BMT[17] 8 + * VA[16] 7 + * [15] - + * ICID[14:7] - + * ICID[6:0] 6-0 + * ---------------------------- + */ + +#define AMQ_PL_MASK (0x1 << 18) /* priviledge bit */ +#define AMQ_BMT_MASK (0x1 << 17) /* bypass bit */ + +#define FSL_INVALID_STREAM_ID 0 + +#define FSL_BYPASS_AMQ (AMQ_PL_MASK | AMQ_BMT_MASK) + +/* legacy devices */ +#define FSL_USB1_STREAM_ID 1 +#define FSL_USB2_STREAM_ID 2 +#define FSL_SDMMC_STREAM_ID 3 +#define FSL_SATA1_STREAM_ID 4 +#define FSL_SATA2_STREAM_ID 5 +#define FSL_DMA_STREAM_ID 6 + +/* PCI - programmed in PEXn_LUT by OS */ +/* 4 IDs per controller */ +#define FSL_PEX1_STREAM_ID_START 7 +#define FSL_PEX1_STREAM_ID_END 10 +#define FSL_PEX2_STREAM_ID_START 11 +#define FSL_PEX2_STREAM_ID_END 14 +#define FSL_PEX3_STREAM_ID_START 15 +#define FSL_PEX3_STREAM_ID_END 18 +#define FSL_PEX4_STREAM_ID_START 19 +#define FSL_PEX4_STREAM_ID_END 22 + +/* DPAA2 - set in MC DPC and alloced by MC */ +#define FSL_DPAA2_STREAM_ID_START 23 +#define FSL_DPAA2_STREAM_ID_END 63 + +#endif diff --git a/arch/arm/include/asm/arch-fsl-lsch3/soc.h b/arch/arm/include/asm/arch-fsl-lsch3/soc.h index 16b723d..9a29272 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/soc.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/soc.h @@ -4,5 +4,25 @@ * SPDX-License-Identifier: GPL-2.0+ */ +struct cpu_type { + char name[15]; + u32 soc_ver; + u32 num_cores; +}; + +#define CPU_TYPE_ENTRY(n, v, nc) \ + { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)} + +#define SVR_WO_E 0xFFFFFE +#define SVR_LS2045 0x870120 +#define SVR_LS2080 0x870110 +#define SVR_LS2085 0x870100 + +#define SVR_MAJ(svr) (((svr) >> 4) & 0xf) +#define SVR_MIN(svr) (((svr) >> 0) & 0xf) +#define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E) +#define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1)) + void fsl_lsch3_early_init_f(void); +void cpu_name(char *name); diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 4dc528b..c55cdef 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -35,6 +35,7 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) #define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) +#define CONFIG_SYS_LS102XA_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) #define CONFIG_SYS_LS102XA_USB1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index ee547fb..d34044a 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -149,6 +149,7 @@ struct ccsr_gur { #define SCFG_ETSECCMCR_GE1_CLK125 0x08000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 #define SCFG_QSPI_CLKSEL 0xc0100000 +#define SCFG_ENDIANCR_LE 0x80000000 /* Supplemental Configuration Unit */ struct ccsr_scfg { @@ -207,7 +208,7 @@ struct ccsr_scfg { u32 qos2; u32 qos3; u32 cci_cfg; - u32 resv8[1]; + u32 endiancr; u32 etsecdmamcr; u32 usb3prm3cr; u32 resv9[1]; @@ -395,4 +396,5 @@ struct ccsr_cci400 { } pcounter[4]; /* Performance Counter */ u8 res_e004[0x10000 - 0xe004]; }; + #endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h index 194b93b..537d13b 100644 --- a/arch/arm/include/asm/arch-omap3/omap.h +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -142,6 +142,7 @@ struct gpio { #define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ #define NON_SECURE_SRAM_END 0x40210000 +#define SRAM_SCRATCH_SPACE_ADDR 0x4020E000 #define LOW_LEVEL_SRAM_STACK 0x4020FFFC @@ -245,4 +246,16 @@ struct gpio { /* ABB tranxdone mask */ #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned char boot_device; + unsigned char reserved; + unsigned char reset_reason; + unsigned char ch_flags; + unsigned int boot_device_descriptor; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index 8350532..a31b4ea 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -7,14 +7,16 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONENAND 3 -#define BOOT_DEVICE_MMC2 5 /*emmc*/ -#define BOOT_DEVICE_MMC1 6 -#define BOOT_DEVICE_XIPWAIT 7 -#define BOOT_DEVICE_MMC2_2 0xFF +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_NAND 0x02 +#define BOOT_DEVICE_ONENAND 0x03 +#define BOOT_DEVICE_MMC2 0x05 +#define BOOT_DEVICE_MMC1 0x06 +#define BOOT_DEVICE_XIPWAIT 0x07 +#define BOOT_DEVICE_MMC2_2 0x08 +#define BOOT_DEVICE_UART 0x10 +#define BOOT_DEVICE_USB 0x11 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 3e45ce1..94f29fd 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -52,7 +52,6 @@ void set_muxconf_regs(void); u32 get_cpu_family(void); u32 get_cpu_rev(void); u32 get_sku_id(void); -u32 get_sysboot_value(void); u32 is_gpmc_muxed(void); u32 get_gpmc0_type(void); u32 get_gpmc0_width(void); @@ -75,4 +74,6 @@ void get_dieid(u32 *id); void do_omap3_emu_romcode_call(u32 service_id, u32 parameters); void omap3_set_aux_cr_secure(u32 acr); u32 warm_reset(void); + +void save_omap_boot_params(void); #endif diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index d43dc26..12b1a09 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -124,4 +124,15 @@ struct s32ktimer { /* ABB tranxdone mask */ #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; + unsigned char ch_flags; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index fb842a2..bace92d 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -7,15 +7,17 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_XIPWAIT 2 -#define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONENAND 4 -#define BOOT_DEVICE_MMC1 5 -#define BOOT_DEVICE_MMC2 6 -#define BOOT_DEVICE_MMC2_2 0xFF +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAND 0x04 +#define BOOT_DEVICE_MMC1 0x05 +#define BOOT_DEVICE_MMC2 0x06 +#define BOOT_DEVICE_MMC2_2 0x07 +#define BOOT_DEVICE_UART 0x43 +#define BOOT_DEVICE_USB 0x45 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 #endif diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 68c6d6d..524fae4 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -235,4 +235,16 @@ struct ctrl_ioregs { }; #endif /* __ASSEMBLY__ */ + +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; + unsigned char ch_flags; +}; +#endif + #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index f707998..468ff5a 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -7,17 +7,20 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_XIPWAIT 2 -#define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONENAND 4 -#define BOOT_DEVICE_MMC1 5 -#define BOOT_DEVICE_MMC2 6 -#define BOOT_DEVICE_MMC2_2 7 -#define BOOT_DEVICE_SATA 9 -#define BOOT_DEVICE_SPI 10 +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAND 0x04 +#define BOOT_DEVICE_MMC1 0x05 +#define BOOT_DEVICE_MMC2 0x06 +#define BOOT_DEVICE_MMC2_2 0x07 +#define BOOT_DEVICE_SATA 0x09 +#define BOOT_DEVICE_SPI 0x0A +#define BOOT_DEVICE_QSPI_1 0x0A +#define BOOT_DEVICE_QSPI_4 0x0B #define BOOT_DEVICE_UART 0x43 +#define BOOT_DEVICE_USB 0x45 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h index a9f88db..3ed3801 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h @@ -14,6 +14,7 @@ /* * Peripheral memory map */ +#define STM32_SYSMEM_BASE 0x1FFF0000 #define STM32_PERIPH_BASE 0x40000000 #define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000) #define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000) @@ -25,6 +26,12 @@ /* * Register maps */ +struct stm32_u_id_regs { + u32 u_id_low; + u32 u_id_mid; + u32 u_id_high; +}; + struct stm32_rcc_regs { u32 cr; /* RCC clock control */ u32 pllcfgr; /* RCC PLL configuration */ @@ -78,6 +85,9 @@ struct stm32_flash_regs { /* * Registers access macros */ +#define STM32_U_ID_BASE (STM32_SYSMEM_BASE + 0x7A10) +#define STM32_U_ID ((struct stm32_u_id_regs *)STM32_U_ID_BASE) + #define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800) #define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index cb52e64..3da360b 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -127,4 +127,5 @@ struct sunxi_mmc { #define SUNXI_MMC_COMMON_RESET (1 << 18) struct mmc *sunxi_mmc_init(int sdc_no); +int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h index b7b831e..17d31b8 100644 --- a/arch/arm/include/asm/arch-sunxi/usb_phy.h +++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h @@ -17,4 +17,12 @@ void sunxi_usb_phy_exit(int index); void sunxi_usb_phy_power_on(int index); void sunxi_usb_phy_power_off(int index); int sunxi_usb_phy_vbus_detect(int index); +int sunxi_usb_phy_id_detect(int index); void sunxi_usb_phy_enable_squelch_detect(int index, int enable); + +/* Not really phy related, but we have to declare this somewhere ... */ +#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) +void sunxi_musb_board_init(void); +#else +#define sunxi_musb_board_init() +#endif diff --git a/arch/arm/include/asm/arch-tegra/ap.h b/arch/arm/include/asm/arch-tegra/ap.h index ca40e4e..76773b7 100644 --- a/arch/arm/include/asm/arch-tegra/ap.h +++ b/arch/arm/include/asm/arch-tegra/ap.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2011 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -24,8 +24,6 @@ #define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ #define PG_UP_TAG_0 0x0 -#define CORESIGHT_UNLOCK 0xC5ACCE55; - /* AP base physical address of internal SRAM */ #define NV_PA_BASE_SRAM 0x40000000 @@ -66,7 +64,7 @@ int tegra_get_sku_info(void); /* Do any chip-specific cache config */ void config_cache(void); -#if defined(CONFIG_TEGRA124) +#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) /* Do chip-specific vpr config */ void config_vpr(void); #else diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h index de50e08..f690260 100644 --- a/arch/arm/include/asm/arch-tegra/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra/clk_rst.h @@ -48,6 +48,7 @@ enum { TEGRA_CLK_REGS_VW = 2, /* Number of clock enable regs V/W */ TEGRA_CLK_SOURCES_VW = 32, /* Number of ppl clock sources V/W */ TEGRA_CLK_SOURCES_X = 32, /* Number of ppl clock sources X */ + TEGRA_CLK_SOURCES_Y = 18, /* Number of ppl clock sources Y */ }; /* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */ @@ -94,7 +95,15 @@ struct clk_rst_ctlr { uint crc_rst_dev_x_set; /* _RST_DEV_X_SET_0, 0x290 */ uint crc_rst_dev_x_clr; /* _RST_DEV_X_CLR_0, 0x294 */ - uint crc_reserved21[23]; /* _reserved_21, 0x298-2f0 */ + uint crc_clk_out_enb_y; /* _CLK_OUT_ENB_Y_0, 0x298 */ + uint crc_clk_enb_y_set; /* _CLK_ENB_Y_SET_0, 0x29c */ + uint crc_clk_enb_y_clr; /* _CLK_ENB_Y_CLR_0, 0x2a0 */ + + uint crc_rst_devices_y; /* _RST_DEVICES_Y_0, 0x2a4 */ + uint crc_rst_dev_y_set; /* _RST_DEV_Y_SET_0, 0x2a8 */ + uint crc_rst_dev_y_clr; /* _RST_DEV_Y_CLR_0, 0x2ac */ + + uint crc_reserved21[17]; /* _reserved_21, 0x2b0-2f0 */ uint crc_dfll_base; /* _DFLL_BASE_0, 0x2f4 */ @@ -136,7 +145,7 @@ struct clk_rst_ctlr { struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW]; /* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */ struct clk_set_clr crc_clk_enb_ex_vw[TEGRA_CLK_REGS_VW]; - /* Additional (T114) registers */ + /* Additional (T114+) registers */ uint crc_rst_cpug_cmplx_set; /* _RST_CPUG_CMPLX_SET_0, 0x450 */ uint crc_rst_cpug_cmplx_clr; /* _RST_CPUG_CMPLX_CLR_0, 0x454 */ uint crc_rst_cpulp_cmplx_set; /* _RST_CPULP_CMPLX_SET_0, 0x458 */ @@ -207,9 +216,18 @@ struct clk_rst_ctlr { u32 _rsv32_1[7]; /* 0x574-58c */ struct clk_pll_simple plldp; /* _PLLDP_BASE, 0x590 _PLLDP_MISC */ u32 crc_plldp_ss_cfg; /* _PLLDP_SS_CFG, 0x598 */ - u32 _rsrv32_2[25]; - /* Tegra124 */ - uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x678 */ + + /* Tegra124+ - skip to 0x600 here for new CLK_SOURCE_ regs */ + uint _rsrv32_2[25]; /* _0x59C - 0x5FC */ + uint crc_clk_src_x[TEGRA_CLK_SOURCES_X]; /* XUSB, etc, 0x600-0x67C */ + + /* Tegra210 - skip to 0x694 here for new CLK_SOURCE_ regs */ + uint crc_reserved61[5]; /* _reserved_61, 0x680 - 0x690 */ + /* + * NOTE: PLLA1 regs are in the middle of this Y region. Break this in + * two later if PLLA1 is needed, but for now this is cleaner. + */ + uint crc_clk_src_y[TEGRA_CLK_SOURCES_Y]; /* SPARE1, etc, 0x694-0x6D8 */ }; /* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */ @@ -233,6 +251,8 @@ struct clk_rst_ctlr { #define PLL_DIVP_SHIFT 20 #define PLL_DIVP_MASK (7U << PLL_DIVP_SHIFT) +/* Special case for T210 PLLU DIVP */ +#define PLLU_DIVP_SHIFT 16 #define PLL_DIVN_SHIFT 8 #define PLL_DIVN_MASK (0x3ffU << PLL_DIVN_SHIFT) @@ -261,6 +281,12 @@ struct clk_rst_ctlr { #define PLL_LFCON_SHIFT 4 #define PLL_LFCON_MASK (15U << PLL_LFCON_SHIFT) +/* CPCON/LFCON replaced by KCP/KVCO in T210 PLLU */ +#define PLLU_KVCO_SHIFT 24 +#define PLLU_KVCO_MASK (3U << PLLU_KVCO_SHIFT) +#define PLLU_KCP_SHIFT 25 +#define PLLU_KCP_MASK (1U << PLLU_KCP_SHIFT) + #define PLLU_VCO_FREQ_SHIFT 20 #define PLLU_VCO_FREQ_MASK (1U << PLLU_VCO_FREQ_SHIFT) diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h index 7a86acb..695f3e6 100644 --- a/arch/arm/include/asm/arch-tegra/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -21,5 +21,6 @@ #define CHIPID_TEGRA30 0x30 #define CHIPID_TEGRA114 0x35 #define CHIPID_TEGRA124 0x40 +#define CHIPID_TEGRA210 0x21 #endif /* _TEGRA_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h index 1dd3154..66c0879 100644 --- a/arch/arm/include/asm/arch-tegra/pmc.h +++ b/arch/arm/include/asm/arch-tegra/pmc.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011,2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -294,6 +294,7 @@ struct pmc_ctlr { #define CRAIL 0 #define CE0 14 #define C0NC 15 +#define SOR 17 #define PMC_XOFS_SHIFT 1 #define PMC_XOFS_MASK (0x3F << PMC_XOFS_SHIFT) @@ -303,7 +304,7 @@ struct pmc_ctlr { #define TIMER_MULT_MASK (3 << TIMER_MULT_SHIFT) #define TIMER_MULT_CPU_SHIFT 2 #define TIMER_MULT_CPU_MASK (3 << TIMER_MULT_CPU_SHIFT) -#elif defined(CONFIG_TEGRA124) +#elif defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) #define TIMER_MULT_SHIFT 0 #define TIMER_MULT_MASK (7 << TIMER_MULT_SHIFT) #define TIMER_MULT_CPU_SHIFT 3 @@ -314,7 +315,7 @@ struct pmc_ctlr { #define MULT_2 1 #define MULT_4 2 #define MULT_8 3 -#if defined(CONFIG_TEGRA124) +#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) #define MULT_16 4 #endif diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h index d63af0e..b6c7cab 100644 --- a/arch/arm/include/asm/arch-tegra/tegra.h +++ b/arch/arm/include/asm/arch-tegra/tegra.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -74,6 +74,7 @@ enum { SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */ SKU_ID_T114_1 = 0x01, SKU_ID_T124_ENG = 0x00, /* Venice2 value, unfused */ + SKU_ID_T210_ENG = 0x00, /* unfused value TBD */ }; /* @@ -88,6 +89,7 @@ enum { TEGRA_SOC_T30, TEGRA_SOC_T114, TEGRA_SOC_T124, + TEGRA_SOC_T210, TEGRA_SOC_CNT, TEGRA_SOC_UNKNOWN = -1, diff --git a/arch/arm/include/asm/arch-tegra/usb.h b/arch/arm/include/asm/arch-tegra/usb.h index c817088..f400c01 100644 --- a/arch/arm/include/asm/arch-tegra/usb.h +++ b/arch/arm/include/asm/arch-tegra/usb.h @@ -266,6 +266,9 @@ struct usb_ctlr { /* USBx_UTMIP_BIAS_CFG1_0 */ #define UTMIP_FORCE_PDTRK_POWERDOWN 1 +#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT 8 +#define UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK \ + (0x3f << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT) #define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3 #define UTMIP_BIAS_PDTRK_COUNT_MASK \ (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT) diff --git a/arch/arm/include/asm/arch-tegra210/ahb.h b/arch/arm/include/asm/arch-tegra210/ahb.h new file mode 100644 index 0000000..3a37af4 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/ahb.h @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_AHB_H_ +#define _TEGRA210_AHB_H_ + +struct ahb_ctlr { + u32 reserved0; /* 00h */ + u32 arbitration_disable; /* _ARBITRATION_DISABLE_0, 04h */ + u32 arbitration_priority_ctrl; /* _ARBITRATION_PRIORITY_CTRL_0,08h */ + u32 arbitration_usr_protect; /* _ARBITRATION_USR_PROTECT_0, 0ch */ + u32 gizmo_ahb_mem; /* _GIZMO_AHB_MEM_0, 10h */ + u32 gizmo_apb_dma; /* _GIZMO_APB_DMA_0, 14h */ + u32 reserved6[2]; /* 18h, 1ch */ + u32 gizmo_usb; /* _GIZMO_USB_0, 20h */ + u32 gizmo_ahb_xbar_bridge; /* _GIZMO_AHB_XBAR_BRIDGE_0, 24h */ + u32 gizmo_cpu_ahb_bridge; /* _GIZMO_CPU_AHB_BRIDGE_0, 28h */ + u32 gizmo_cop_ahb_bridge; /* _GIZMO_COP_AHB_BRIDGE_0, 2ch */ + u32 gizmo_xbar_apb_ctlr; /* _GIZMO_XBAR_APB_CTLR_0, 30h */ + u32 gizmo_vcp_ahb_bridge; /* _GIZMO_VCP_AHB_BRIDGE_0, 34h */ + u32 reserved13[2]; /* 38h, 3ch */ + u32 gizmo_nand; /* _GIZMO_NAND_0, 40h */ + u32 reserved15; /* 44h */ + u32 gizmo_sdmmc4; /* _GIZMO_SDMMC4_0, 48h */ + u32 reserved17; /* 4ch */ + u32 gizmo_se; /* _GIZMO_SE_0, 50h */ + u32 gizmo_tzram; /* _GIZMO_TZRAM_0, 54h */ + u32 reserved20[3]; /* 58h, 5ch, 60h */ + u32 gizmo_bsev; /* _GIZMO_BSEV_0, 64h */ + u32 reserved22[3]; /* 68h, 6ch, 70h */ + u32 gizmo_bsea; /* _GIZMO_BSEA_0, 74h */ + u32 gizmo_nor; /* _GIZMO_NOR_0, 78h */ + u32 gizmo_usb2; /* _GIZMO_USB2_0, 7ch */ + u32 gizmo_usb3; /* _GIZMO_USB3_0, 80h */ + u32 gizmo_sdmmc1; /* _GIZMO_SDMMC1_0, 84h */ + u32 gizmo_sdmmc2; /* _GIZMO_SDMMC2_0, 88h */ + u32 gizmo_sdmmc3; /* _GIZMO_SDMMC3_0, 8ch */ + u32 reserved30[13]; /* 90h ~ c0h */ + u32 ahb_wrq_empty; /* _AHB_WRQ_EMPTY_0, c4h */ + u32 reserved32[5]; /* c8h ~ d8h */ + u32 ahb_mem_prefetch_cfg_x; /* _AHB_MEM_PREFETCH_CFG_X_0, dch */ + u32 arbitration_xbar_ctrl; /* _ARBITRATION_XBAR_CTRL_0, e0h */ + u32 ahb_mem_prefetch_cfg3; /* _AHB_MEM_PREFETCH_CFG3_0, e4h */ + u32 ahb_mem_prefetch_cfg4; /* _AHB_MEM_PREFETCH_CFG3_0, e8h */ + u32 avp_ppcs_rd_coh_status; /* _AVP_PPCS_RD_COH_STATUS_0, ech */ + u32 ahb_mem_prefetch_cfg1; /* _AHB_MEM_PREFETCH_CFG1_0, f0h */ + u32 ahb_mem_prefetch_cfg2; /* _AHB_MEM_PREFETCH_CFG2_0, f4h */ + u32 ahbslvmem_status; /* _AHBSLVMEM_STATUS_0, f8h */ + /* _ARBITRATION_AHB_MEM_WRQUE_MST_ID_0, fch */ + u32 arbitration_ahb_mem_wrque_mst_id; + u32 arbitration_cpu_abort_addr; /* _ARBITRATION_CPU_ABORT_ADDR_0,100h */ + u32 arbitration_cpu_abort_info; /* _ARBITRATION_CPU_ABORT_INFO_0,104h */ + u32 arbitration_cop_abort_addr; /* _ARBITRATION_COP_ABORT_ADDR_0,108h */ + u32 arbitration_cop_abort_info; /* _ARBITRATION_COP_ABORT_INFO_0,10ch */ + u32 reserved46[4]; /* 110h ~ 11ch */ + u32 avpc_mccif_fifoctrl; /* _AVPC_MCCIF_FIFOCTRL_0, 120h */ + u32 timeout_wcoal_avpc; /* _TIMEOUT_WCOAL_AVPC_0, 124h */ + u32 mpcorelp_mccif_fifoctrl; /* _MPCORELP_MCCIF_FIFOCTRL_0, 128h */ + u32 mpcore_mccif_fifoctrl; /* _MPCORE_MCCIF_FIFOCTRL_0, 12ch */ + u32 axicif_fastsync_ctrl; /* AXICIF_FASTSYNC_CTRL_0, 130h */ + u32 axicif_fastsync_statistics; /* _AXICIF_FASTSYNC_STATISTICS_0,134h */ + /* _AXICIF_FASTSYNC0_CPUCLK_TO_MCCLK_0, 138h */ + u32 axicif_fastsync0_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC1_CPUCLK_TO_MCCLK_0, 13ch */ + u32 axicif_fastsync1_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC2_CPUCLK_TO_MCCLK_0, 140h */ + u32 axicif_fastsync2_cpuclk_to_mcclk; + /* _AXICIF_FASTSYNC0_MCCLK_TO_CPUCLK_0, 144h */ + u32 axicif_fastsync0_mcclk_to_cpuclk; + /* _AXICIF_FASTSYNC1_MCCLK_TO_CPUCLK_0, 148h */ + u32 axicif_fastsync1_mcclk_to_cpuclk; + /* _AXICIF_FASTSYNC2_MCCLK_TO_CPUCLK_0, 14ch */ + u32 axicif_fastsync2_mcclk_to_cpuclk; +}; + +#define PPSB_STOPCLK_ENABLE (1 << 2) + +#define GIZ_ENABLE_SPLIT (1 << 0) +#define GIZ_ENB_FAST_REARB (1 << 2) +#define GIZ_DONT_SPLIT_AHB_WR (1 << 7) + +#define GIZ_USB_IMMEDIATE (1 << 18) + +/* AHB_ARBITRATION_XBAR_CTRL_0 0xe0 */ +#define ARBITRATION_XBAR_CTRL_PPSB_ENABLE (1 << 2) + +#endif /* _TEGRA210_AHB_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/clock-tables.h b/arch/arm/include/asm/arch-tegra210/clock-tables.h new file mode 100644 index 0000000..b62e070 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/clock-tables.h @@ -0,0 +1,566 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 clock PLL tables */ + +#ifndef _TEGRA210_CLOCK_TABLES_H_ +#define _TEGRA210_CLOCK_TABLES_H_ + +/* The PLLs supported by the hardware */ +enum clock_id { + CLOCK_ID_FIRST, + CLOCK_ID_CGENERAL = CLOCK_ID_FIRST, + CLOCK_ID_MEMORY, + CLOCK_ID_PERIPH, + CLOCK_ID_AUDIO, + CLOCK_ID_USB, + CLOCK_ID_DISPLAY, + + /* now the simple ones */ + CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_EPCI, + CLOCK_ID_SFROM32KHZ, + + /* These are the base clocks (inputs to the Tegra SoC) */ + CLOCK_ID_32KHZ, + CLOCK_ID_OSC, + + CLOCK_ID_COUNT, /* number of PLLs */ + + /* + * These are clock IDs that are used in table clock_source[][] + * but will not be assigned as a clock source for any peripheral. + */ + CLOCK_ID_DISPLAY2, + CLOCK_ID_CGENERAL_0, + CLOCK_ID_CGENERAL_1, + CLOCK_ID_CGENERAL2, + CLOCK_ID_CGENERAL3, + CLOCK_ID_CGENERAL4_0, + CLOCK_ID_CGENERAL4_1, + CLOCK_ID_CGENERAL4_2, + CLOCK_ID_MEMORY2, + CLOCK_ID_SRC2, + + CLOCK_ID_NONE = -1, +}; + +/* The clocks supported by the hardware */ +enum periph_id { + PERIPH_ID_FIRST, + + /* Low word: 31:0 (DEVICES_L) */ + PERIPH_ID_CPU = PERIPH_ID_FIRST, + PERIPH_ID_COP, + PERIPH_ID_TRIGSYS, + PERIPH_ID_ISPB, + PERIPH_ID_RESERVED4, + PERIPH_ID_TMR, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + + /* 8 */ + PERIPH_ID_GPIO, + PERIPH_ID_SDMMC2, + PERIPH_ID_SPDIF, + PERIPH_ID_I2S2, + PERIPH_ID_I2C1, + PERIPH_ID_RESERVED13, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC4, + + /* 16 */ + PERIPH_ID_TCW, + PERIPH_ID_PWM, + PERIPH_ID_I2S3, + PERIPH_ID_RESERVED19, + PERIPH_ID_VI, + PERIPH_ID_RESERVED21, + PERIPH_ID_USBD, + PERIPH_ID_ISP, + + /* 24 */ + PERIPH_ID_RESERVED24, + PERIPH_ID_RESERVED25, + PERIPH_ID_DISP2, + PERIPH_ID_DISP1, + PERIPH_ID_HOST1X, + PERIPH_ID_VCP, + PERIPH_ID_I2S1, + PERIPH_ID_CACHE2, + + /* Middle word: 63:32 (DEVICES_H) */ + PERIPH_ID_MEM, + PERIPH_ID_AHBDMA, + PERIPH_ID_APBDMA, + PERIPH_ID_RESERVED35, + PERIPH_ID_RESERVED36, + PERIPH_ID_STAT_MON, + PERIPH_ID_RESERVED38, + PERIPH_ID_FUSE, + + /* 40 */ + PERIPH_ID_KFUSE, + PERIPH_ID_SBC1, + PERIPH_ID_SNOR, + PERIPH_ID_RESERVED43, + PERIPH_ID_SBC2, + PERIPH_ID_XIO, + PERIPH_ID_SBC3, + PERIPH_ID_I2C5, + + /* 48 */ + PERIPH_ID_DSI, + PERIPH_ID_RESERVED49, + PERIPH_ID_HSI, + PERIPH_ID_HDMI, + PERIPH_ID_CSI, + PERIPH_ID_RESERVED53, + PERIPH_ID_I2C2, + PERIPH_ID_UART3, + + /* 56 */ + PERIPH_ID_MIPI_CAL, + PERIPH_ID_EMC, + PERIPH_ID_USB2, + PERIPH_ID_USB3, + PERIPH_ID_RESERVED60, + PERIPH_ID_VDE, + PERIPH_ID_BSEA, + PERIPH_ID_BSEV, + + /* Upper word 95:64 (DEVICES_U) */ + PERIPH_ID_RESERVED64, + PERIPH_ID_UART4, + PERIPH_ID_UART5, + PERIPH_ID_I2C3, + PERIPH_ID_SBC4, + PERIPH_ID_SDMMC3, + PERIPH_ID_PCIE, + PERIPH_ID_OWR, + + /* 72 */ + PERIPH_ID_AFI, + PERIPH_ID_CORESIGHT, + PERIPH_ID_PCIEXCLK, + PERIPH_ID_AVPUCQ, + PERIPH_ID_LA, + PERIPH_ID_TRACECLKIN, + PERIPH_ID_SOC_THERM, + PERIPH_ID_DTV, + + /* 80 */ + PERIPH_ID_RESERVED80, + PERIPH_ID_I2CSLOW, + PERIPH_ID_DSIB, + PERIPH_ID_TSEC, + PERIPH_ID_RESERVED84, + PERIPH_ID_RESERVED85, + PERIPH_ID_RESERVED86, + PERIPH_ID_EMUCIF, + + /* 88 */ + PERIPH_ID_RESERVED88, + PERIPH_ID_XUSB_HOST, + PERIPH_ID_RESERVED90, + PERIPH_ID_MSENC, + PERIPH_ID_RESERVED92, + PERIPH_ID_RESERVED93, + PERIPH_ID_RESERVED94, + PERIPH_ID_XUSB_DEV, + + PERIPH_ID_VW_FIRST, + /* V word: 31:0 */ + PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST, + PERIPH_ID_CPULP, + PERIPH_ID_V_RESERVED2, + PERIPH_ID_MSELECT, + PERIPH_ID_V_RESERVED4, + PERIPH_ID_I2S4, + PERIPH_ID_I2S5, + PERIPH_ID_I2C4, + + /* 104 */ + PERIPH_ID_SBC5, + PERIPH_ID_SBC6, + PERIPH_ID_AHUB, + PERIPH_ID_APB2APE, + PERIPH_ID_V_RESERVED12, + PERIPH_ID_V_RESERVED13, + PERIPH_ID_V_RESERVED14, + PERIPH_ID_HDA2CODEC2X, + + /* 112 */ + PERIPH_ID_ATOMICS, + PERIPH_ID_V_RESERVED17, + PERIPH_ID_V_RESERVED18, + PERIPH_ID_V_RESERVED19, + PERIPH_ID_V_RESERVED20, + PERIPH_ID_V_RESERVED21, + PERIPH_ID_V_RESERVED22, + PERIPH_ID_ACTMON, + + /* 120 */ + PERIPH_ID_EXTPERIPH1, + PERIPH_ID_EXTPERIPH2, + PERIPH_ID_EXTPERIPH3, + PERIPH_ID_OOB, + PERIPH_ID_SATA, + PERIPH_ID_HDA, + PERIPH_ID_V_RESERVED30, + PERIPH_ID_V_RESERVED31, + + /* W word: 31:0 */ + PERIPH_ID_HDA2HDMICODEC, + PERIPH_ID_SATACOLD, + PERIPH_ID_W_RESERVED2, + PERIPH_ID_W_RESERVED3, + PERIPH_ID_W_RESERVED4, + PERIPH_ID_W_RESERVED5, + PERIPH_ID_W_RESERVED6, + PERIPH_ID_W_RESERVED7, + + /* 136 */ + PERIPH_ID_CEC, + PERIPH_ID_W_RESERVED9, + PERIPH_ID_W_RESERVED10, + PERIPH_ID_W_RESERVED11, + PERIPH_ID_W_RESERVED12, + PERIPH_ID_W_RESERVED13, + PERIPH_ID_XUSB_PADCTL, + PERIPH_ID_W_RESERVED15, + + /* 144 */ + PERIPH_ID_W_RESERVED16, + PERIPH_ID_W_RESERVED17, + PERIPH_ID_W_RESERVED18, + PERIPH_ID_W_RESERVED19, + PERIPH_ID_W_RESERVED20, + PERIPH_ID_ENTROPY, + PERIPH_ID_DDS, + PERIPH_ID_W_RESERVED23, + + /* 152 */ + PERIPH_ID_W_RESERVED24, + PERIPH_ID_W_RESERVED25, + PERIPH_ID_W_RESERVED26, + PERIPH_ID_DVFS, + PERIPH_ID_XUSB_SS, + PERIPH_ID_W_RESERVED29, + PERIPH_ID_W_RESERVED30, + PERIPH_ID_W_RESERVED31, + + PERIPH_ID_X_FIRST, + /* X word: 31:0 */ + PERIPH_ID_SPARE = PERIPH_ID_X_FIRST, + PERIPH_ID_X_RESERVED1, + PERIPH_ID_X_RESERVED2, + PERIPH_ID_X_RESERVED3, + PERIPH_ID_CAM_MCLK, + PERIPH_ID_CAM_MCLK2, + PERIPH_ID_I2C6, + PERIPH_ID_X_RESERVED7, + + /* 168 */ + PERIPH_ID_X_RESERVED8, + PERIPH_ID_X_RESERVED9, + PERIPH_ID_X_RESERVED10, + PERIPH_ID_VIM2_CLK, + PERIPH_ID_X_RESERVED12, + PERIPH_ID_X_RESERVED13, + PERIPH_ID_EMC_DLL, + PERIPH_ID_X_RESERVED15, + + /* 176 */ + PERIPH_ID_HDMI_AUDIO, + PERIPH_ID_CLK72MHZ, + PERIPH_ID_VIC, + PERIPH_ID_X_RESERVED19, + PERIPH_ID_X_RESERVED20, + PERIPH_ID_DPAUX, + PERIPH_ID_SOR0, + PERIPH_ID_X_RESERVED23, + + /* 184 */ + PERIPH_ID_GPU, + PERIPH_ID_X_RESERVED25, + PERIPH_ID_X_RESERVED26, + PERIPH_ID_X_RESERVED27, + PERIPH_ID_X_RESERVED28, + PERIPH_ID_X_RESERVED29, + PERIPH_ID_X_RESERVED30, + PERIPH_ID_X_RESERVED31, + + PERIPH_ID_Y_FIRST, + /* Y word: 31:0 (192:223) */ + PERIPH_ID_SPARE1 = PERIPH_ID_Y_FIRST, + PERIPH_ID_Y_RESERVED1, + PERIPH_ID_Y_RESERVED2, + PERIPH_ID_Y_RESERVED3, + PERIPH_ID_Y_RESERVED4, + PERIPH_ID_Y_RESERVED5, + PERIPH_ID_APE, + PERIPH_ID_Y_RESERVED7, + + /* 200 */ + PERIPH_ID_MC_CDPA, + PERIPH_ID_Y_RESERVED9, + PERIPH_ID_Y_RESERVED10, + PERIPH_ID_Y_RESERVED11, + PERIPH_ID_Y_RESERVED12, + PERIPH_ID_PEX_USB_UPHY, + PERIPH_ID_Y_RESERVED14, + PERIPH_ID_Y_RESERVED15, + + /* 208 */ + PERIPH_ID_VI_I2C, + PERIPH_ID_Y_RESERVED17, + PERIPH_ID_Y_RESERVED18, + PERIPH_ID_QSPI, + PERIPH_ID_Y_RESERVED20, + PERIPH_ID_Y_RESERVED21, + PERIPH_ID_Y_RESERVED22, + PERIPH_ID_Y_RESERVED23, + + /* 216 */ + PERIPH_ID_Y_RESERVED24, + PERIPH_ID_Y_RESERVED25, + PERIPH_ID_Y_RESERVED26, + PERIPH_ID_Y_RESERVED27, + PERIPH_ID_Y_RESERVED28, + PERIPH_ID_Y_RESERVED29, + PERIPH_ID_Y_RESERVED30, + PERIPH_ID_Y_RESERVED31, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +enum pll_out_id { + PLL_OUT1, + PLL_OUT2, + PLL_OUT3, + PLL_OUT4 +}; + +/* + * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want + * callers to use the PERIPH_ID for all access to peripheral clocks to avoid + * confusion bewteen PERIPH_ID_... and PERIPHC_... + * + * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be + * confusing. + */ +enum periphc_internal_id { + /* 0x00 */ + PERIPHC_I2S2, + PERIPHC_I2S3, + PERIPHC_SPDIF_OUT, + PERIPHC_SPDIF_IN, + PERIPHC_PWM, + PERIPHC_05h, + PERIPHC_SBC2, + PERIPHC_SBC3, + + /* 0x08 */ + PERIPHC_08h, + PERIPHC_I2C1, + PERIPHC_I2C5, + PERIPHC_0bh, + PERIPHC_0ch, + PERIPHC_SBC1, + PERIPHC_DISP1, + PERIPHC_DISP2, + + /* 0x10 */ + PERIPHC_10h, + PERIPHC_11h, + PERIPHC_VI, + PERIPHC_13h, + PERIPHC_SDMMC1, + PERIPHC_SDMMC2, + PERIPHC_G3D, + PERIPHC_G2D, + + /* 0x18 */ + PERIPHC_18h, + PERIPHC_SDMMC4, + PERIPHC_VFIR, + PERIPHC_1Bh, + PERIPHC_1Ch, + PERIPHC_HSI, + PERIPHC_UART1, + PERIPHC_UART2, + + /* 0x20 */ + PERIPHC_HOST1X, + PERIPHC_21h, + PERIPHC_22h, + PERIPHC_HDMI, + PERIPHC_24h, + PERIPHC_25h, + PERIPHC_I2C2, + PERIPHC_EMC, + + /* 0x28 */ + PERIPHC_UART3, + PERIPHC_29h, + PERIPHC_VI_SENSOR, + PERIPHC_2bh, + PERIPHC_2ch, + PERIPHC_SBC4, + PERIPHC_I2C3, + PERIPHC_SDMMC3, + + /* 0x30 */ + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_VDE, + PERIPHC_OWR, + PERIPHC_NOR, + PERIPHC_CSITE, + PERIPHC_I2S1, + PERIPHC_DTV, + + /* 0x38 */ + PERIPHC_38h, + PERIPHC_39h, + PERIPHC_3ah, + PERIPHC_3bh, + PERIPHC_MSENC, + PERIPHC_TSEC, + PERIPHC_3eh, + PERIPHC_OSC, + + PERIPHC_VW_FIRST, + /* 0x40 */ + PERIPHC_40h = PERIPHC_VW_FIRST, + PERIPHC_MSELECT, + PERIPHC_TSENSOR, + PERIPHC_I2S4, + PERIPHC_I2S5, + PERIPHC_I2C4, + PERIPHC_SBC5, + PERIPHC_SBC6, + + /* 0x48 */ + PERIPHC_AUDIO, + PERIPHC_49h, + PERIPHC_4ah, + PERIPHC_4bh, + PERIPHC_4ch, + PERIPHC_HDA2CODEC2X, + PERIPHC_ACTMON, + PERIPHC_EXTPERIPH1, + + /* 0x50 */ + PERIPHC_EXTPERIPH2, + PERIPHC_EXTPERIPH3, + PERIPHC_52h, + PERIPHC_I2CSLOW, + PERIPHC_SYS, + PERIPHC_55h, + PERIPHC_56h, + PERIPHC_57h, + + /* 0x58 */ + PERIPHC_58h, + PERIPHC_59h, + PERIPHC_5ah, + PERIPHC_5bh, + PERIPHC_SATAOOB, + PERIPHC_SATA, + PERIPHC_HDA, /* 0x428 */ + PERIPHC_5fh, + + PERIPHC_X_FIRST, + /* 0x60 */ + PERIPHC_XUSB_CORE_HOST = PERIPHC_X_FIRST, /* 0x600 */ + PERIPHC_XUSB_FALCON, + PERIPHC_XUSB_FS, + PERIPHC_XUSB_CORE_DEV, + PERIPHC_XUSB_SS, + PERIPHC_CILAB, + PERIPHC_CILCD, + PERIPHC_CILE, + + /* 0x68 */ + PERIPHC_DSIA_LP, + PERIPHC_DSIB_LP, + PERIPHC_ENTROPY, + PERIPHC_DVFS_REF, + PERIPHC_DVFS_SOC, + PERIPHC_TRACECLKIN, + PERIPHC_6Eh, + PERIPHC_6Fh, + + /* 0x70 */ + PERIPHC_EMC_LATENCY, + PERIPHC_SOC_THERM, + PERIPHC_72h, + PERIPHC_73h, + PERIPHC_74h, + PERIPHC_75h, + PERIPHC_VI_SENSOR2, + PERIPHC_I2C6, + + /* 0x78 */ + PERIPHC_78h, + PERIPHC_EMC_DLL, + PERIPHC_7ah, + PERIPHC_CLK72MHZ, + PERIPHC_7ch, + PERIPHC_7dh, + PERIPHC_VIC, + PERIPHC_7fh, + + PERIPHC_Y_FIRST, + /* 0x80 */ + PERIPHC_SDMMC_LEGACY_TM = PERIPHC_Y_FIRST, /* 0x694 */ + PERIPHC_NVDEC, /* 0x698 */ + PERIPHC_NVJPG, /* 0x69c */ + PERIPHC_NVENC, /* 0x6a0 */ + PERIPHC_84h, + PERIPHC_85h, + PERIPHC_86h, + PERIPHC_87h, + + /* 0x88 */ + PERIPHC_88h, + PERIPHC_89h, + PERIPHC_DMIC3, /* 0x6bc: */ + PERIPHC_APE, /* 0x6c0: */ + PERIPHC_QSPI, /* 0x6c4: */ + PERIPHC_VI_I2C, /* 0x6c8: */ + PERIPHC_USB2_HSIC_TRK, /* 0x6cc: */ + PERIPHC_PEX_SATA_USB_RX_BYP, /* 0x6d0: */ + + /* 0x90 */ + PERIPHC_MAUD, /* 0x6d4: */ + PERIPHC_TSECB, /* 0x6d8: */ + + PERIPHC_COUNT, + PERIPHC_NONE = -1, +}; + +/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */ +#define PERIPH_REG(id) \ + (id < PERIPH_ID_VW_FIRST) ? \ + ((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5) + +/* Mask value for a clock (within PERIPH_REG(id)) */ +#define PERIPH_MASK(id) (1 << ((id) & 0x1f)) + +/* return 1 if a PLL ID is in range */ +#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT) + +/* return 1 if a peripheral ID is in range */ +#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \ + (id) < PERIPH_ID_COUNT) + +#endif /* _TEGRA210_CLOCK_TABLES_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/clock.h b/arch/arm/include/asm/arch-tegra210/clock.h new file mode 100644 index 0000000..3501be2 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/clock.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 clock control definitions */ + +#ifndef _TEGRA210_CLOCK_H_ +#define _TEGRA210_CLOCK_H_ + +#include <asm/arch-tegra/clock.h> + +/* CLK_RST_CONTROLLER_OSC_CTRL_0 */ +#define OSC_FREQ_SHIFT 28 +#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT) + +/* PLL bits that differ from generic clk_rst.h */ +#define PLLC_RESET 30 +#define PLLC_IDDQ 27 +#define PLLD_ENABLE_CLK 21 +#define PLLD_EN_LCKDET 28 + +int tegra_plle_enable(void); + +#endif /* _TEGRA210_CLOCK_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/flow.h b/arch/arm/include/asm/arch-tegra210/flow.h new file mode 100644 index 0000000..e2301ae --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/flow.h @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_FLOW_H_ +#define _TEGRA210_FLOW_H_ + +struct flow_ctlr { + u32 halt_cpu_events; /* offset 0x00 */ + u32 halt_cop_events; /* offset 0x04 */ + u32 cpu_csr; /* offset 0x08 */ + u32 cop_csr; /* offset 0x0c */ + u32 xrq_events; /* offset 0x10 */ + u32 halt_cpu1_events; /* offset 0x14 */ + u32 cpu1_csr; /* offset 0x18 */ + u32 halt_cpu2_events; /* offset 0x1c */ + u32 cpu2_csr; /* offset 0x20 */ + u32 halt_cpu3_events; /* offset 0x24 */ + u32 cpu3_csr; /* offset 0x28 */ + u32 cluster_control; /* offset 0x2c */ + u32 halt_cop1_events; /* offset 0x30 */ + u32 halt_cop1_csr; /* offset 0x34 */ + u32 cpu_pwr_csr; /* offset 0x38 */ + u32 mpid; /* offset 0x3c */ + u32 ram_repair; /* offset 0x40 */ +}; + +/* HALT_COP_EVENTS_0, 0x04 */ +#define EVENT_MSEC (1 << 24) +#define EVENT_USEC (1 << 25) +#define EVENT_JTAG (1 << 28) +#define EVENT_MODE_STOP (2 << 29) + +/* FLOW_CTLR_CLUSTER_CONTROL_0 0x2c */ +#define ACTIVE_LP (1 << 0) + +/* CPUn_CSR_0 */ +#define CSR_ENABLE (1 << 0) +#define CSR_IMMEDIATE_WAKE (1 << 3) +#define CSR_WAIT_WFI_SHIFT 8 + +#endif /* _TEGRA210_FLOW_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/funcmux.h b/arch/arm/include/asm/arch-tegra210/funcmux.h new file mode 100644 index 0000000..f0851de --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/funcmux.h @@ -0,0 +1,23 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 high-level function multiplexing */ + +#ifndef _TEGRA210_FUNCMUX_H_ +#define _TEGRA210_FUNCMUX_H_ + +#include <asm/arch-tegra/funcmux.h> + +/* Configs supported by the func mux */ +enum { + FUNCMUX_DEFAULT = 0, /* default config */ + + /* UART configs */ + FUNCMUX_UART1_UART1 = 0, + FUNCMUX_UART4_UART4 = 0, +}; +#endif /* _TEGRA210_FUNCMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/gp_padctrl.h b/arch/arm/include/asm/arch-tegra210/gp_padctrl.h new file mode 100644 index 0000000..fb69baf --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/gp_padctrl.h @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_GP_PADCTRL_H_ +#define _TEGRA210_GP_PADCTRL_H_ + +#include <asm/arch-tegra/gp_padctrl.h> + +/* APB_MISC_GP and padctrl registers */ +struct apb_misc_gp_ctlr { + u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */ + u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */ + u32 reserved0[22]; /* 0x08 - 0x5C: */ + u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */ + u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */ + u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */ + u32 aocfg2; /* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */ + u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */ + u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */ + u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */ + u32 atcfg4; /* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */ + u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */ + u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */ + u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */ + u32 reserved1; /* 0x8C: */ + u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */ + u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */ + u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */ + u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */ + u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */ + u32 reserved2[3]; /* 0xA4 - 0xAC: */ + u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */ + u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */ + u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */ + u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */ + u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */ + u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */ + u32 reserved3[9]; /* 0xC8-0xE8: */ + u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ + u32 reserved4[3]; /* 0xF0-0xF8: */ + u32 ddccfg; /* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */ + u32 gmacfg; /* 0x100: APB_MISC_GP_GMACFGPADCTRL */ + u32 reserved5[3]; /* 0x104-0x10C: */ + u32 gmecfg; /* 0x110: APB_MISC_GP_GMECFGPADCTRL */ + u32 gmfcfg; /* 0x114: APB_MISC_GP_GMFCFGPADCTRL */ + u32 gmgcfg; /* 0x118: APB_MISC_GP_GMGCFGPADCTRL */ + u32 gmhcfg; /* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */ + u32 owrcfg; /* 0x120: APB_MISC_GP_OWRCFGPADCTRL */ + u32 uadcfg; /* 0x124: APB_MISC_GP_UADCFGPADCTRL */ + u32 reserved6; /* 0x128: */ + u32 dev3cfg; /* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */ + u32 reserved7[2]; /* 0x130 - 0x134: */ + u32 ceccfg; /* 0x138: APB_MISC_GP_CECCFGPADCTRL */ + u32 reserved8[22]; /* 0x13C - 0x190: */ + u32 atcfg6; /* 0x194: APB_MISC_GP_ATCFG6PADCTRL */ + u32 dap5cfg; /* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */ + u32 vbuscfg; /* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */ + u32 aocfg3; /* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */ + u32 hvccfg0; /* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */ + u32 sdio4cfg; /* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */ + u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */ +}; + +/* SDMMC1/3 settings from section 27.5 of T114 TRM */ +#define SDIOCFG_DRVUP_SLWF 0 +#define SDIOCFG_DRVDN_SLWR 0 +#define SDIOCFG_DRVUP 0x24 +#define SDIOCFG_DRVDN 0x14 + +#endif /* _TEGRA210_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/gpio.h b/arch/arm/include/asm/arch-tegra210/gpio.h new file mode 100644 index 0000000..71af423 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/gpio.h @@ -0,0 +1,303 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_GPIO_H_ +#define _TEGRA210_GPIO_H_ + +/* + * The Tegra210 GPIO controller has 256 GPIOS in 8 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */ +#define TEGRA_GPIO_BANKS 8 /* number of banks */ + +#include <asm/arch-tegra/gpio.h> + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; + uint gpio_masked_config[TEGRA_GPIO_PORTS]; + uint gpio_masked_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_masked_out[TEGRA_GPIO_PORTS]; + uint gpio_masked_in[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_status[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_level[TEGRA_GPIO_PORTS]; + uint gpio_masked_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +enum gpio_pin { + GPIO_PA0 = 0, /* pin 0 */ + GPIO_PA1, + GPIO_PA2, + GPIO_PA3, + GPIO_PA4, + GPIO_PA5, + GPIO_PA6, + GPIO_PA7, + GPIO_PB0, /* pin 8 */ + GPIO_PB1, + GPIO_PB2, + GPIO_PB3, + GPIO_PB4, + GPIO_PB5, + GPIO_PB6, + GPIO_PB7, + GPIO_PC0, /* pin 16 */ + GPIO_PC1, + GPIO_PC2, + GPIO_PC3, + GPIO_PC4, + GPIO_PC5, + GPIO_PC6, + GPIO_PC7, + GPIO_PD0, /* pin 24 */ + GPIO_PD1, + GPIO_PD2, + GPIO_PD3, + GPIO_PD4, + GPIO_PD5, + GPIO_PD6, + GPIO_PD7, + GPIO_PE0, /* pin 32 */ + GPIO_PE1, + GPIO_PE2, + GPIO_PE3, + GPIO_PE4, + GPIO_PE5, + GPIO_PE6, + GPIO_PE7, + GPIO_PF0, /* pin 40 */ + GPIO_PF1, + GPIO_PF2, + GPIO_PF3, + GPIO_PF4, + GPIO_PF5, + GPIO_PF6, + GPIO_PF7, + GPIO_PG0, /* pin 48 */ + GPIO_PG1, + GPIO_PG2, + GPIO_PG3, + GPIO_PG4, + GPIO_PG5, + GPIO_PG6, + GPIO_PG7, + GPIO_PH0, /* pin 56 */ + GPIO_PH1, + GPIO_PH2, + GPIO_PH3, + GPIO_PH4, + GPIO_PH5, + GPIO_PH6, + GPIO_PH7, + GPIO_PI0, /* pin 64 */ + GPIO_PI1, + GPIO_PI2, + GPIO_PI3, + GPIO_PI4, + GPIO_PI5, + GPIO_PI6, + GPIO_PI7, + GPIO_PJ0, /* pin 72 */ + GPIO_PJ1, + GPIO_PJ2, + GPIO_PJ3, + GPIO_PJ4, + GPIO_PJ5, + GPIO_PJ6, + GPIO_PJ7, + GPIO_PK0, /* pin 80 */ + GPIO_PK1, + GPIO_PK2, + GPIO_PK3, + GPIO_PK4, + GPIO_PK5, + GPIO_PK6, + GPIO_PK7, + GPIO_PL0, /* pin 88 */ + GPIO_PL1, + GPIO_PL2, + GPIO_PL3, + GPIO_PL4, + GPIO_PL5, + GPIO_PL6, + GPIO_PL7, + GPIO_PM0, /* pin 96 */ + GPIO_PM1, + GPIO_PM2, + GPIO_PM3, + GPIO_PM4, + GPIO_PM5, + GPIO_PM6, + GPIO_PM7, + GPIO_PN0, /* pin 104 */ + GPIO_PN1, + GPIO_PN2, + GPIO_PN3, + GPIO_PN4, + GPIO_PN5, + GPIO_PN6, + GPIO_PN7, + GPIO_PO0, /* pin 112 */ + GPIO_PO1, + GPIO_PO2, + GPIO_PO3, + GPIO_PO4, + GPIO_PO5, + GPIO_PO6, + GPIO_PO7, + GPIO_PP0, /* pin 120 */ + GPIO_PP1, + GPIO_PP2, + GPIO_PP3, + GPIO_PP4, + GPIO_PP5, + GPIO_PP6, + GPIO_PP7, + GPIO_PQ0, /* pin 128 */ + GPIO_PQ1, + GPIO_PQ2, + GPIO_PQ3, + GPIO_PQ4, + GPIO_PQ5, + GPIO_PQ6, + GPIO_PQ7, + GPIO_PR0, /* pin 136 */ + GPIO_PR1, + GPIO_PR2, + GPIO_PR3, + GPIO_PR4, + GPIO_PR5, + GPIO_PR6, + GPIO_PR7, + GPIO_PS0, /* pin 144 */ + GPIO_PS1, + GPIO_PS2, + GPIO_PS3, + GPIO_PS4, + GPIO_PS5, + GPIO_PS6, + GPIO_PS7, + GPIO_PT0, /* pin 152 */ + GPIO_PT1, + GPIO_PT2, + GPIO_PT3, + GPIO_PT4, + GPIO_PT5, + GPIO_PT6, + GPIO_PT7, + GPIO_PU0, /* pin 160 */ + GPIO_PU1, + GPIO_PU2, + GPIO_PU3, + GPIO_PU4, + GPIO_PU5, + GPIO_PU6, + GPIO_PU7, + GPIO_PV0, /* pin 168 */ + GPIO_PV1, + GPIO_PV2, + GPIO_PV3, + GPIO_PV4, + GPIO_PV5, + GPIO_PV6, + GPIO_PV7, + GPIO_PW0, /* pin 176 */ + GPIO_PW1, + GPIO_PW2, + GPIO_PW3, + GPIO_PW4, + GPIO_PW5, + GPIO_PW6, + GPIO_PW7, + GPIO_PX0, /* pin 184 */ + GPIO_PX1, + GPIO_PX2, + GPIO_PX3, + GPIO_PX4, + GPIO_PX5, + GPIO_PX6, + GPIO_PX7, + GPIO_PY0, /* pin 192 */ + GPIO_PY1, + GPIO_PY2, + GPIO_PY3, + GPIO_PY4, + GPIO_PY5, + GPIO_PY6, + GPIO_PY7, + GPIO_PZ0, /* pin 200 */ + GPIO_PZ1, + GPIO_PZ2, + GPIO_PZ3, + GPIO_PZ4, + GPIO_PZ5, + GPIO_PZ6, + GPIO_PZ7, + GPIO_PAA0, /* pin 208 */ + GPIO_PAA1, + GPIO_PAA2, + GPIO_PAA3, + GPIO_PAA4, + GPIO_PAA5, + GPIO_PAA6, + GPIO_PAA7, + GPIO_PBB0, /* pin 216 */ + GPIO_PBB1, + GPIO_PBB2, + GPIO_PBB3, + GPIO_PBB4, + GPIO_PBB5, + GPIO_PBB6, + GPIO_PBB7, + GPIO_PCC0, /* pin 224 */ + GPIO_PCC1, + GPIO_PCC2, + GPIO_PCC3, + GPIO_PCC4, + GPIO_PCC5, + GPIO_PCC6, + GPIO_PCC7, + GPIO_PDD0, /* pin 232 */ + GPIO_PDD1, + GPIO_PDD2, + GPIO_PDD3, + GPIO_PDD4, + GPIO_PDD5, + GPIO_PDD6, + GPIO_PDD7, + GPIO_PEE0, /* pin 240 */ + GPIO_PEE1, + GPIO_PEE2, + GPIO_PEE3, + GPIO_PEE4, + GPIO_PEE5, + GPIO_PEE6, + GPIO_PEE7, + GPIO_PFF0, /* pin 248 */ + GPIO_PFF1, + GPIO_PFF2, + GPIO_PFF3, + GPIO_PFF4, + GPIO_PFF5, + GPIO_PFF6, + GPIO_PFF7, /* pin 255 */ +}; + +#endif /* _TEGRA210_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/mc.h b/arch/arm/include/asm/arch-tegra210/mc.h new file mode 100644 index 0000000..77e9aa5 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/mc.h @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2014-2015 NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_MC_H_ +#define _TEGRA210_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[4]; /* offset 0x00 - 0x0C */ + u32 mc_smmu_config; /* offset 0x10 */ + u32 mc_smmu_tlb_config; /* offset 0x14 */ + u32 mc_smmu_ptc_config; /* offset 0x18 */ + u32 mc_smmu_ptb_asid; /* offset 0x1C */ + u32 mc_smmu_ptb_data; /* offset 0x20 */ + u32 reserved1[3]; /* offset 0x24 - 0x2C */ + u32 mc_smmu_tlb_flush; /* offset 0x30 */ + u32 mc_smmu_ptc_flush; /* offset 0x34 */ + u32 reserved2[6]; /* offset 0x38 - 0x4C */ + u32 mc_emem_cfg; /* offset 0x50 */ + u32 mc_emem_adr_cfg; /* offset 0x54 */ + u32 mc_emem_adr_cfg_dev0; /* offset 0x58 */ + u32 mc_emem_adr_cfg_dev1; /* offset 0x5C */ + u32 reserved3[4]; /* offset 0x60 - 0x6C */ + u32 mc_security_cfg0; /* offset 0x70 */ + u32 mc_security_cfg1; /* offset 0x74 */ + u32 reserved4[6]; /* offset 0x7C - 0x8C */ + u32 mc_emem_arb_reserved[28]; /* offset 0x90 - 0xFC */ + u32 reserved5[74]; /* offset 0x100 - 0x224 */ + u32 mc_smmu_translation_enable_0; /* offset 0x228 */ + u32 mc_smmu_translation_enable_1; /* offset 0x22C */ + u32 mc_smmu_translation_enable_2; /* offset 0x230 */ + u32 mc_smmu_translation_enable_3; /* offset 0x234 */ + u32 mc_smmu_afi_asid; /* offset 0x238 */ + u32 mc_smmu_avpc_asid; /* offset 0x23C */ + u32 mc_smmu_dc_asid; /* offset 0x240 */ + u32 mc_smmu_dcb_asid; /* offset 0x244 */ + u32 reserved6[2]; /* offset 0x248 - 0x24C */ + u32 mc_smmu_hc_asid; /* offset 0x250 */ + u32 mc_smmu_hda_asid; /* offset 0x254 */ + u32 mc_smmu_isp2_asid; /* offset 0x258 */ + u32 reserved7[2]; /* offset 0x25C - 0x260 */ + u32 mc_smmu_msenc_asid; /* offset 0x264 */ + u32 mc_smmu_nv_asid; /* offset 0x268 */ + u32 mc_smmu_nv2_asid; /* offset 0x26C */ + u32 mc_smmu_ppcs_asid; /* offset 0x270 */ + u32 mc_smmu_sata_asid; /* offset 0x274 */ + u32 reserved8[1]; /* offset 0x278 */ + u32 mc_smmu_vde_asid; /* offset 0x27C */ + u32 mc_smmu_vi_asid; /* offset 0x280 */ + u32 mc_smmu_vic_asid; /* offset 0x284 */ + u32 mc_smmu_xusb_host_asid; /* offset 0x288 */ + u32 mc_smmu_xusb_dev_asid; /* offset 0x28C */ + u32 reserved9[1]; /* offset 0x290 */ + u32 mc_smmu_tsec_asid; /* offset 0x294 */ + u32 mc_smmu_ppcs1_asid; /* offset 0x298 */ + u32 reserved10[235]; /* offset 0x29C - 0x644 */ + u32 mc_video_protect_bom; /* offset 0x648 */ + u32 mc_video_protect_size_mb; /* offset 0x64c */ + u32 mc_video_protect_reg_ctrl; /* offset 0x650 */ +}; + +#define TEGRA_MC_SMMU_CONFIG_ENABLE (1 << 0) + +#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_ENABLED (0 << 0) +#define TEGRA_MC_VIDEO_PROTECT_REG_WRITE_ACCESS_DISABLED (1 << 0) + +#endif /* _TEGRA210_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/pmu.h b/arch/arm/include/asm/arch-tegra210/pmu.h new file mode 100644 index 0000000..1e5f388 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/pmu.h @@ -0,0 +1,14 @@ +/* + * (C) Copyright 2010-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_PMU_H_ +#define _TEGRA210_PMU_H_ + +/* Set core and CPU voltages to nominal levels */ +int pmu_set_nominal(void); + +#endif /* _TEGRA210_PMU_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/powergate.h b/arch/arm/include/asm/arch-tegra210/powergate.h new file mode 100644 index 0000000..df6f91d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/powergate.h @@ -0,0 +1,12 @@ +/* + * Copyright (c) 2014-2015 NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_POWERGATE_H_ +#define _TEGRA210_POWERGATE_H_ + +#include <asm/arch-tegra/powergate.h> + +#endif /* _TEGRA210_POWERGATE_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/sysctr.h b/arch/arm/include/asm/arch-tegra210/sysctr.h new file mode 100644 index 0000000..e8a13b5 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/sysctr.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_SYSCTR_H_ +#define _TEGRA210_SYSCTR_H_ + +struct sysctr_ctlr { + u32 cntcr; /* 0x00: SYSCTR0_CNTCR Counter Control */ + u32 cntsr; /* 0x04: SYSCTR0_CNTSR Counter Status */ + u32 cntcv0; /* 0x08: SYSCTR0_CNTCV0 Counter Count 31:00 */ + u32 cntcv1; /* 0x0C: SYSCTR0_CNTCV1 Counter Count 63:32 */ + u32 reserved1[4]; /* 0x10 - 0x1C */ + u32 cntfid0; /* 0x20: SYSCTR0_CNTFID0 Freq Table Entry */ + u32 cntfid1; /* 0x24: SYSCTR0_CNTFID1 Freq Table End */ + u32 reserved2[1002]; /* 0x28 - 0xFCC */ + u32 counterid[12]; /* 0xFD0 - 0xFxx CounterID regs, RO */ +}; + +#define TSC_CNTCR_ENABLE (1 << 0) /* Enable */ +#define TSC_CNTCR_HDBG (1 << 1) /* Halt on debug */ + +#endif /* _TEGRA210_SYSCTR_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/tegra.h b/arch/arm/include/asm/arch-tegra210/tegra.h new file mode 100644 index 0000000..95c67fb --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/tegra.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_TEGRA_H_ +#define _TEGRA210_TEGRA_H_ + +#define GICD_BASE 0x50041000 /* Generic Int Cntrlr Distrib */ +#define GICC_BASE 0x50042000 /* Generic Int Cntrlr CPU I/F */ +#define NV_PA_AHB_BASE 0x6000C000 /* System regs (AHB, etc.) */ +#define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ +#define NV_PA_MC_BASE 0x70019000 /* Mem Ctlr regs (MCB, etc.) */ +#define NV_PA_SDRAM_BASE 0x80000000 + +#include <asm/arch-tegra/tegra.h> + +#define BCT_ODMDATA_OFFSET 1288 /* offset to ODMDATA word */ + +#undef NVBOOTINFOTABLE_BCTSIZE +#undef NVBOOTINFOTABLE_BCTPTR +#define NVBOOTINFOTABLE_BCTSIZE 0x48 /* BCT size in BIT in IRAM */ +#define NVBOOTINFOTABLE_BCTPTR 0x4C /* BCT pointer in BIT in IRAM */ + +#define MAX_NUM_CPU 4 +#define MCB_EMEM_ARB_OVERRIDE (NV_PA_MC_BASE + 0xE8) + +#define TEGRA_USB1_BASE 0x7D000000 + +#endif /* _TEGRA210_TEGRA_H_ */ diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index c9dc49d..7640eab 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -11,6 +11,11 @@ #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 #define ZYNQ_SERIAL_BASEADDR1 0xFF001000 +#define ZYNQ_GEM_BASEADDR0 0xFF0B0000 +#define ZYNQ_GEM_BASEADDR1 0xFF0C0000 +#define ZYNQ_GEM_BASEADDR2 0xFF0D0000 +#define ZYNQ_GEM_BASEADDR3 0xFF0E0000 + #define ZYNQ_SPI_BASEADDR0 0xFF040000 #define ZYNQ_SPI_BASEADDR1 0xFF050000 @@ -20,6 +25,8 @@ #define ZYNQ_SDHCI_BASEADDR0 0xFF160000 #define ZYNQ_SDHCI_BASEADDR1 0xFF170000 +#define ZYNQMP_SATA_BASEADDR 0xFD0C0000 + #define ZYNQMP_CRL_APB_BASEADDR 0xFF5E0000 #define ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT 0x1000000 @@ -55,6 +62,15 @@ struct iou_scntr { #define EMMC_MODE 0x00000006 #define JTAG_MODE 0x00000000 +#define ZYNQMP_IOU_SLCR_BASEADDR 0xFF180000 + +struct iou_slcr_regs { + u32 mio_pin[78]; + u32 reserved[442]; +}; + +#define slcr_base ((struct iou_slcr_regs *)ZYNQMP_IOU_SLCR_BASEADDR) + #define ZYNQMP_RPU_BASEADDR 0xFF9A0000 struct rpu_regs { diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h index d8e0ba1..f5c90d1 100644 --- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h +++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h @@ -8,7 +8,13 @@ #ifndef _ASM_ARCH_SYS_PROTO_H #define _ASM_ARCH_SYS_PROTO_H +/* Setup clk for network */ +static inline void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) +{ +} + int zynq_sdhci_init(unsigned long regbase); +int zynq_slcr_get_mio_pin_status(const char *periph); unsigned int zynqmp_get_silicon_version(void); diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h index 4b9cb52..04fa0be 100644 --- a/arch/arm/include/asm/armv8/mmu.h +++ b/arch/arm/include/asm/armv8/mmu.h @@ -93,8 +93,8 @@ #define TCR_ORGN_WBNWA (3 << 10) #define TCR_ORGN_MASK (3 << 10) #define TCR_SHARED_NON (0 << 12) -#define TCR_SHARED_OUTER (1 << 12) -#define TCR_SHARED_INNER (2 << 12) +#define TCR_SHARED_OUTER (2 << 12) +#define TCR_SHARED_INNER (3 << 12) #define TCR_TG0_4K (0 << 14) #define TCR_TG0_64K (1 << 14) #define TCR_TG0_16K (2 << 14) diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index bb24f33..4e3ea55 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -8,10 +8,6 @@ #ifndef __ASM_GBL_DATA_H #define __ASM_GBL_DATA_H -#ifdef CONFIG_OMAP -#include <asm/omap_boot.h> -#endif - /* Architecture-specific global data */ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) @@ -45,8 +41,10 @@ struct arch_global_data { unsigned long tlb_size; #endif -#ifdef CONFIG_OMAP - struct omap_boot_parameters omap_boot_params; +#ifdef CONFIG_OMAP_COMMON + u32 omap_boot_device; + u32 omap_boot_mode; + u8 omap_ch_flags; #endif #ifdef CONFIG_FSL_LSCH3 unsigned long mem2_clk; diff --git a/arch/arm/include/asm/omap_boot.h b/arch/arm/include/asm/omap_boot.h deleted file mode 100644 index f77f9d6..0000000 --- a/arch/arm/include/asm/omap_boot.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2013 - * Texas Instruments, <www.ti.com> - * - * Sricharan R <r.sricharan@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ROM code defines */ -/* Boot device */ -#define BOOT_DEVICE_MASK 0xFF -#define BOOT_DEVICE_OFFSET 0x8 -#define DEV_DESC_PTR_OFFSET 0x4 -#define DEV_DATA_PTR_OFFSET 0x18 -#define BOOT_MODE_OFFSET 0x8 -#define RESET_REASON_OFFSET 0x9 -#define CH_FLAGS_OFFSET 0xA - -#define CH_FLAGS_CHSETTINGS (0x1 << 0) -#define CH_FLAGS_CHRAM (0x1 << 1) -#define CH_FLAGS_CHFLASH (0x1 << 2) -#define CH_FLAGS_CHMMCSD (0x1 << 3) - -#ifndef __ASSEMBLY__ -struct omap_boot_parameters { - char *boot_message; - unsigned int mem_boot_descriptor; - unsigned char omap_bootdevice; - unsigned char reset_reason; - unsigned char ch_flags; - unsigned long omap_bootmode; -}; -#endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 5469435..056affc 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -688,4 +688,17 @@ static inline u8 is_dra72x(void) #define OMAP_SRAM_SCRATCH_BOOT_PARAMS (SRAM_SCRATCH_SPACE_ADDR + 0x24) #define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x28) +/* Boot parameters */ +#define DEVICE_DATA_OFFSET 0x18 +#define BOOT_MODE_OFFSET 0x8 + +#define CH_FLAGS_CHSETTINGS (1 << 0) +#define CH_FLAGS_CHRAM (1 << 1) +#define CH_FLAGS_CHFLASH (1 << 2) +#define CH_FLAGS_CHMMCSD (1 << 3) + +#ifndef __ASSEMBLY__ +u32 omap_sys_boot_device(void); +#endif + #endif /* _OMAP_COMMON_H_ */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 760e8ab..868ea54 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -15,9 +15,15 @@ #define CR_EE (1 << 25) /* Exception (Big) Endian */ #define PGTABLE_SIZE (0x10000) +/* 2MB granularity */ +#define MMU_SECTION_SHIFT 21 #ifndef __ASSEMBLY__ +enum dcache_option { + DCACHE_OFF = 0x3, +}; + #define isb() \ ({asm volatile( \ "isb" : : : "memory"); \ @@ -265,16 +271,6 @@ enum { #endif /** - * Change the cache settings for a region. - * - * \param start start address of memory region to change - * \param size size of memory region to change - * \param option dcache option to select - */ -void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, - enum dcache_option option); - -/** * Register an update to the page tables, and flush the TLB * * \param start start address of update in page table @@ -295,4 +291,17 @@ phys_addr_t noncached_alloc(size_t size, size_t align); #endif /* CONFIG_ARM64 */ +#ifndef __ASSEMBLY__ +/** + * Change the cache settings for a region. + * + * \param start start address of memory region to change + * \param size size of memory region to change + * \param option dcache option to select + */ +void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size, + enum dcache_option option); + +#endif /* __ASSEMBLY__ */ + #endif diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h index d3ab75f..2bdb71c 100644 --- a/arch/arm/include/asm/ti-common/sys_proto.h +++ b/arch/arm/include/asm/ti-common/sys_proto.h @@ -36,7 +36,7 @@ static inline u8 uboot_loaded_by_spl(void) * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a * mandatory section if CH is present. */ - if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + if (gd->arch.omap_ch_flags & CH_FLAGS_CHSETTINGS) return 0; else return running_from_sdram(); diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index bc9c53c..98a906e 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -74,7 +74,8 @@ zero_gd: cmp x0, x18 b.gt zero_gd #if defined(CONFIG_SYS_MALLOC_F_LEN) - sub x0, x18, #CONFIG_SYS_MALLOC_F_LEN + ldr x0, =CONFIG_SYS_MALLOC_F_LEN + sub x0, x18, x0 str x0, [x18, #GD_MALLOC_BASE] #endif bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ diff --git a/arch/arm/mach-keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c index f9f58a3..73ceb83 100644 --- a/arch/arm/mach-keystone/cmd_mon.c +++ b/arch/arm/mach-keystone/cmd_mon.c @@ -55,8 +55,13 @@ U_BOOT_CMD(mon_install, 2, 0, do_mon_install, static void core_spin(void) { - while (1) - ; /* forever */; + while (1) { + asm volatile ( + "dsb\n" + "isb\n" + "wfi\n" + ); + } } int mon_power_on(int core_id, void *ep) diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 4f477cd..446ce04 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -20,5 +20,7 @@ obj-y += timer.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o -obj-y += serdes/ +obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += serdes/a38x/ +obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += serdes/axp/ + endif diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 9bc9f00..9496d5f 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -163,6 +163,14 @@ static void update_sdram_window_sizes(void) } } +void mmu_disable(void) +{ + asm volatile( + "mrc p15, 0, r0, c1, c0, 0\n" + "bic r0, #1\n" + "mcr p15, 0, r0, c1, c0, 0\n"); +} + #ifdef CONFIG_ARCH_CPU_INIT static void set_cbar(u32 addr) { @@ -172,6 +180,16 @@ static void set_cbar(u32 addr) int arch_cpu_init(void) { +#ifndef CONFIG_SPL_BUILD + /* + * Only with disabled MMU its possible to switch the base + * register address on Armada 38x. Without this the SDRAM + * located at >= 0x4000.0000 is also not accessible, as its + * still locked to cache. + */ + mmu_disable(); +#endif + /* Linux expects the internal registers to be at 0xf1000000 */ writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); set_cbar(SOC_REGS_PHY_BASE + 0xC000); diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index 4bdb633..8bcdef6 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -125,7 +125,7 @@ int serdes_phy_config(void); /* * DDR3 init / training code ported from Marvell bin_hdr. Now * available in mainline U-Boot in: - * drivers/ddr/mvebu/ + * drivers/ddr/marvell */ int ddr3_init(void); #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index 1aaea67..125b5f2 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -28,7 +28,17 @@ /* SOC specific definations */ #define INTREG_BASE 0xd0000000 #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYS_MVEBU_DDR_A38X) +/* + * On A38x switching the regs base address without running from + * SDRAM doesn't seem to work. So let the SPL still use the + * default base address and switch to the new address in the + * main u-boot later. + */ +#define SOC_REGS_PHY_BASE 0xd0000000 +#else #define SOC_REGS_PHY_BASE 0xf1000000 +#endif #define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x) #define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) @@ -52,6 +62,7 @@ #define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000)) #define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000)) #define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000)) +#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000)) #define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000)) #define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000)) diff --git a/arch/arm/mach-mvebu/serdes/a38x/Makefile b/arch/arm/mach-mvebu/serdes/a38x/Makefile new file mode 100644 index 0000000..1503da8 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/Makefile @@ -0,0 +1,10 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) = ctrl_pex.o +obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o +obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec-38x.o +obj-$(CONFIG_SPL_BUILD) += high_speed_topology_spec-38x.o +obj-$(CONFIG_SPL_BUILD) += seq_exec.o +obj-$(CONFIG_SPL_BUILD) += sys_env_lib.o diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c new file mode 100644 index 0000000..5f223f9 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c @@ -0,0 +1,347 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ctrl_pex.h" +#include "sys_env_lib.h" + +int hws_pex_config(struct serdes_map *serdes_map) +{ + u32 pex_idx, tmp, next_busno, first_busno, temp_pex_reg, + temp_reg, addr, dev_id, ctrl_mode; + enum serdes_type serdes_type; + u32 idx, max_lane_num; + + DEBUG_INIT_FULL_S("\n### hws_pex_config ###\n"); + + max_lane_num = hws_serdes_get_max_lane(); + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + /* configuration for PEX only */ + if ((serdes_type != PEX0) && (serdes_type != PEX1) && + (serdes_type != PEX2) && (serdes_type != PEX3)) + continue; + + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + pex_idx = serdes_type - PEX0; + tmp = reg_read(PEX_CAPABILITIES_REG(pex_idx)); + tmp &= ~(0xf << 20); + tmp |= (0x4 << 20); + reg_write(PEX_CAPABILITIES_REG(pex_idx), tmp); + } + + tmp = reg_read(SOC_CTRL_REG); + tmp &= ~0x03; + + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + switch (serdes_type) { + case PEX0: + tmp |= 0x1 << PCIE0_ENABLE_OFFS; + break; + case PEX1: + tmp |= 0x1 << PCIE1_ENABLE_OFFS; + break; + case PEX2: + tmp |= 0x1 << PCIE2_ENABLE_OFFS; + break; + case PEX3: + tmp |= 0x1 << PCIE3_ENABLE_OFFS; + break; + default: + break; + } + } + + reg_write(SOC_CTRL_REG, tmp); + + /* Support gen1/gen2 */ + DEBUG_INIT_FULL_S("Support gen1/gen2\n"); + next_busno = 0; + mdelay(150); + + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + DEBUG_INIT_FULL_S(" serdes_type=0x"); + DEBUG_INIT_FULL_D(serdes_type, 8); + DEBUG_INIT_FULL_S("\n"); + DEBUG_INIT_FULL_S(" idx=0x"); + DEBUG_INIT_FULL_D(idx, 8); + DEBUG_INIT_FULL_S("\n"); + + /* Configuration for PEX only */ + if ((serdes_type != PEX0) && (serdes_type != PEX1) && + (serdes_type != PEX2) && (serdes_type != PEX3)) + continue; + + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + pex_idx = serdes_type - PEX0; + tmp = reg_read(PEX_DBG_STATUS_REG(pex_idx)); + + first_busno = next_busno; + if ((tmp & 0x7f) != 0x7e) { + DEBUG_INIT_S("PCIe, Idx "); + DEBUG_INIT_D(pex_idx, 1); + DEBUG_INIT_S(": detected no link\n"); + continue; + } + + next_busno++; + temp_pex_reg = reg_read((PEX_CFG_DIRECT_ACCESS + (pex_idx, PEX_LINK_CAPABILITY_REG))); + temp_pex_reg &= 0xf; + if (temp_pex_reg != 0x2) + continue; + + temp_reg = (reg_read(PEX_CFG_DIRECT_ACCESS( + pex_idx, + PEX_LINK_CTRL_STAT_REG)) & + 0xf0000) >> 16; + + /* Check if the link established is GEN1 */ + DEBUG_INIT_FULL_S + ("Checking if the link established is gen1\n"); + if (temp_reg != 0x1) + continue; + + pex_local_bus_num_set(pex_idx, first_busno); + pex_local_dev_num_set(pex_idx, 1); + DEBUG_INIT_FULL_S("PCIe, Idx "); + DEBUG_INIT_FULL_D(pex_idx, 1); + + DEBUG_INIT_S(":** Link is Gen1, check the EP capability\n"); + /* link is Gen1, check the EP capability */ + addr = pex_config_read(pex_idx, first_busno, 0, 0, 0x34) & 0xff; + DEBUG_INIT_FULL_C("pex_config_read: return addr=0x%x", addr, 4); + if (addr == 0xff) { + DEBUG_INIT_FULL_C + ("pex_config_read: return 0xff -->PCIe (%d): Detected No Link.", + pex_idx, 1); + continue; + } + + while ((pex_config_read(pex_idx, first_busno, 0, 0, addr) + & 0xff) != 0x10) { + addr = (pex_config_read(pex_idx, first_busno, 0, + 0, addr) & 0xff00) >> 8; + } + + /* Check for Gen2 and above */ + if ((pex_config_read(pex_idx, first_busno, 0, 0, + addr + 0xc) & 0xf) < 0x2) { + DEBUG_INIT_S("PCIe, Idx "); + DEBUG_INIT_D(pex_idx, 1); + DEBUG_INIT_S(": remains Gen1\n"); + continue; + } + + tmp = reg_read(PEX_LINK_CTRL_STATUS2_REG(pex_idx)); + DEBUG_RD_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp); + tmp &= ~(BIT(0) | BIT(1)); + tmp |= BIT(1); + tmp |= BIT(6); /* Select Deemphasize (-3.5d_b) */ + reg_write(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp); + DEBUG_WR_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp); + + tmp = reg_read(PEX_CTRL_REG(pex_idx)); + DEBUG_RD_REG(PEX_CTRL_REG(pex_idx), tmp); + tmp |= BIT(10); + reg_write(PEX_CTRL_REG(pex_idx), tmp); + DEBUG_WR_REG(PEX_CTRL_REG(pex_idx), tmp); + + /* + * We need to wait 10ms before reading the PEX_DBG_STATUS_REG + * in order not to read the status of the former state + */ + mdelay(10); + + DEBUG_INIT_S("PCIe, Idx "); + DEBUG_INIT_D(pex_idx, 1); + DEBUG_INIT_S + (": Link upgraded to Gen2 based on client cpabilities\n"); + } + + /* Update pex DEVICE ID */ + ctrl_mode = sys_env_model_get(); + + for (idx = 0; idx < max_lane_num; idx++) { + serdes_type = serdes_map[idx].serdes_type; + /* configuration for PEX only */ + if ((serdes_type != PEX0) && (serdes_type != PEX1) && + (serdes_type != PEX2) && (serdes_type != PEX3)) + continue; + + if ((serdes_type != PEX0) && + ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) { + /* for PEX by4 - relevant for the first port only */ + continue; + } + + pex_idx = serdes_type - PEX0; + dev_id = reg_read(PEX_CFG_DIRECT_ACCESS + (pex_idx, PEX_DEVICE_AND_VENDOR_ID)); + dev_id &= 0xffff; + dev_id |= ((ctrl_mode << 16) & 0xffff0000); + reg_write(PEX_CFG_DIRECT_ACCESS + (pex_idx, PEX_DEVICE_AND_VENDOR_ID), dev_id); + } + DEBUG_INIT_FULL_C("Update PEX Device ID ", ctrl_mode, 4); + + return MV_OK; +} + +int pex_local_bus_num_set(u32 pex_if, u32 bus_num) +{ + u32 pex_status; + + DEBUG_INIT_FULL_S("\n### pex_local_bus_num_set ###\n"); + + if (bus_num >= MAX_PEX_BUSSES) { + DEBUG_INIT_C("pex_local_bus_num_set: Illegal bus number %d\n", + bus_num, 4); + return MV_BAD_PARAM; + } + + pex_status = reg_read(PEX_STATUS_REG(pex_if)); + pex_status &= ~PXSR_PEX_BUS_NUM_MASK; + pex_status |= + (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; + reg_write(PEX_STATUS_REG(pex_if), pex_status); + + return MV_OK; +} + +int pex_local_dev_num_set(u32 pex_if, u32 dev_num) +{ + u32 pex_status; + + DEBUG_INIT_FULL_S("\n### pex_local_dev_num_set ###\n"); + + pex_status = reg_read(PEX_STATUS_REG(pex_if)); + pex_status &= ~PXSR_PEX_DEV_NUM_MASK; + pex_status |= + (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; + reg_write(PEX_STATUS_REG(pex_if), pex_status); + + return MV_OK; +} + +/* + * pex_config_read - Read from configuration space + * + * DESCRIPTION: + * This function performs a 32 bit read from PEX configuration space. + * It supports both type 0 and type 1 of Configuration Transactions + * (local and over bridge). In order to read from local bus segment, use + * bus number retrieved from pex_local_bus_num_get(). Other bus numbers + * will result configuration transaction of type 1 (over bridge). + * + * INPUT: + * pex_if - PEX interface number. + * bus - PEX segment bus number. + * dev - PEX device number. + * func - Function number. + * reg_offs - Register offset. + * + * OUTPUT: + * None. + * + * RETURN: + * 32bit register data, 0xffffffff on error + */ +u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off) +{ + u32 pex_data = 0; + u32 local_dev, local_bus; + u32 pex_status; + + pex_status = reg_read(PEX_STATUS_REG(pex_if)); + local_dev = + ((pex_status & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS); + local_bus = + ((pex_status & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS); + + /* + * In PCI Express we have only one device number + * and this number is the first number we encounter + * else that the local_dev + * spec pex define return on config read/write on any device + */ + if (bus == local_bus) { + if (local_dev == 0) { + /* + * if local dev is 0 then the first number we encounter + * after 0 is 1 + */ + if ((dev != 1) && (dev != local_dev)) + return MV_ERROR; + } else { + /* + * if local dev is not 0 then the first number we + * encounter is 0 + */ + if ((dev != 0) && (dev != local_dev)) + return MV_ERROR; + } + } + + /* Creating PEX address to be passed */ + pex_data = (bus << PXCAR_BUS_NUM_OFFS); + pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS); + pex_data |= (func << PXCAR_FUNC_NUM_OFFS); + /* Legacy register space */ + pex_data |= (reg_off & PXCAR_REG_NUM_MASK); + /* Extended register space */ + pex_data |= (((reg_off & PXCAR_REAL_EXT_REG_NUM_MASK) >> + PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); + pex_data |= PXCAR_CONFIG_EN; + + /* Write the address to the PEX configuration address register */ + reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data); + + /* + * In order to let the PEX controller absorbed the address + * of the read transaction we perform a validity check that + * the address was written + */ + if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if))) + return MV_ERROR; + + /* Cleaning Master Abort */ + reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND), + PXSAC_MABORT); + /* Read the Data returned in the PEX Data register */ + pex_data = reg_read(PEX_CFG_DATA_REG(pex_if)); + + DEBUG_INIT_FULL_C(" --> ", pex_data, 4); + + return pex_data; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h new file mode 100644 index 0000000..df395bf --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h @@ -0,0 +1,86 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _CTRL_PEX_H +#define _CTRL_PEX_H + +#include "high_speed_env_spec.h" + +/* Sample at Reset */ +#define MPP_SAMPLE_AT_RESET(id) (0xe4200 + (id * 4)) + +/* PCI Express Control and Status Registers */ +#define MAX_PEX_BUSSES 256 + +#define MISC_REGS_OFFSET 0x18200 +#define MV_MISC_REGS_BASE MISC_REGS_OFFSET +#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4) + +#define PEX_IF_REGS_OFFSET(if) ((if) > 0 ? \ + (0x40000 + ((if) - 1) * 0x4000) : \ + 0x80000) +#define PEX_IF_REGS_BASE(if) (PEX_IF_REGS_OFFSET(if)) +#define PEX_CAPABILITIES_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x60) +#define PEX_LINK_CTRL_STATUS2_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x90) +#define PEX_CTRL_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a00) +#define PEX_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a04) +#define PEX_DBG_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a64) +#define PEX_LINK_CAPABILITY_REG 0x6c +#define PEX_LINK_CTRL_STAT_REG 0x70 +#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */ +#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS) +#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */ +#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS) + +/* PEX_CAPABILITIES_REG fields */ +#define PCIE0_ENABLE_OFFS 0 +#define PCIE0_ENABLE_MASK (0x1 << PCIE0_ENABLE_OFFS) +#define PCIE1_ENABLE_OFFS 1 +#define PCIE1_ENABLE_MASK (0x1 << PCIE1_ENABLE_OFFS) +#define PCIE2_ENABLE_OFFS 2 +#define PCIE2_ENABLE_MASK (0x1 << PCIE2_ENABLE_OFFS) +#define PCIE3_ENABLE_OFFS 3 +#define PCIE4_ENABLE_MASK (0x1 << PCIE3_ENABLE_OFFS) + +/* Controller revision info */ +#define PEX_DEVICE_AND_VENDOR_ID 0x000 + +/* PCI Express Configuration Address Register */ +#define PXCAR_REG_NUM_OFFS 2 +#define PXCAR_REG_NUM_MAX 0x3f +#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << \ + PXCAR_REG_NUM_OFFS) +#define PXCAR_FUNC_NUM_OFFS 8 +#define PXCAR_FUNC_NUM_MAX 0x7 +#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << \ + PXCAR_FUNC_NUM_OFFS) +#define PXCAR_DEVICE_NUM_OFFS 11 +#define PXCAR_DEVICE_NUM_MAX 0x1f +#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << \ + PXCAR_DEVICE_NUM_OFFS) +#define PXCAR_BUS_NUM_OFFS 16 +#define PXCAR_BUS_NUM_MAX 0xff +#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << \ + PXCAR_BUS_NUM_OFFS) +#define PXCAR_EXT_REG_NUM_OFFS 24 +#define PXCAR_EXT_REG_NUM_MAX 0xf + +#define PEX_CFG_ADDR_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18f8) +#define PEX_CFG_DATA_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18fc) + +#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 +#define PXCAR_REAL_EXT_REG_NUM_MASK (0xf << PXCAR_REAL_EXT_REG_NUM_OFFS) + +#define PXCAR_CONFIG_EN BIT(31) +#define PEX_STATUS_AND_COMMAND 0x004 +#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */ + +int hws_pex_config(struct serdes_map *serdes_map); +int pex_local_bus_num_set(u32 pex_if, u32 bus_num); +int pex_local_dev_num_set(u32 pex_if, u32 dev_num); +u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off); + +#endif diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c new file mode 100644 index 0000000..5ff8567 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_env_spec.h" +#include "sys_env_lib.h" + +#define SERDES_VERION "2.0" + +u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = { + /* 0 1 2 3 4 5 */ + {0x1, 0x1, NA, NA, NA, NA}, /* PEX0 */ + {NA, 0x2, 0x1, NA, 0x1, NA}, /* PEX1 */ + {NA, NA, 0x2, NA, NA, 0x1}, /* PEX2 */ + {NA, NA, NA, 0x1, NA, NA}, /* PEX3 */ + {0x2, 0x3, NA, NA, NA, NA}, /* SATA0 */ + {NA, NA, 0x3, NA, 0x2, NA}, /* SATA1 */ + {NA, NA, NA, NA, 0x6, 0x2}, /* SATA2 */ + {NA, NA, NA, 0x3, NA, NA}, /* SATA3 */ + {0x3, 0x4, NA, NA, NA, NA}, /* SGMII0 */ + {NA, 0x5, 0x4, NA, 0x3, NA}, /* SGMII1 */ + {NA, NA, NA, 0x4, NA, 0x3}, /* SGMII2 */ + {NA, 0x7, NA, NA, NA, NA}, /* QSGMII */ + {NA, 0x6, NA, NA, 0x4, NA}, /* USB3_HOST0 */ + {NA, NA, NA, 0x5, NA, 0x4}, /* USB3_HOST1 */ + {NA, NA, NA, 0x6, 0x5, 0x5}, /* USB3_DEVICE */ + {0x0, 0x0, 0x0, 0x0, 0x0, 0x0} /* DEFAULT_SERDES */ +}; + +int hws_serdes_seq_init(void) +{ + DEBUG_INIT_FULL_S("\n### serdes_seq_init ###\n"); + + if (hws_serdes_seq_db_init() != MV_OK) { + printf("hws_serdes_seq_init: Error: Serdes initialization fail\n"); + return MV_FAIL; + } + + return MV_OK; +} + +int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, + enum ref_clock ref_clock) +{ + return MV_NOT_SUPPORTED; +} + +u32 hws_serdes_silicon_ref_clock_get(void) +{ + DEBUG_INIT_FULL_S("\n### hws_serdes_silicon_ref_clock_get ###\n"); + + return REF_CLOCK_25MHZ; +} + +u32 hws_serdes_get_max_lane(void) +{ + switch (sys_env_device_id_get()) { + case MV_6811: /* A381/A3282: 6811/6821: single/dual cpu */ + return 4; + case MV_6810: + return 5; + case MV_6820: + case MV_6828: + return 6; + default: /* not the right module */ + printf("%s: Device ID Error, using 4 SerDes lanes\n", + __func__); + return 4; + } + return 6; +} + +int hws_is_serdes_active(u8 lane_num) +{ + int ret = 1; + + /* Maximum lane count for A388 (6828) is 6 */ + if (lane_num > 6) + ret = 0; + + /* 4th Lane (#4 on Device 6810 is not Active */ + if (sys_env_device_id_get() == MV_6810 && lane_num == 4) { + printf("%s: Error: Lane#4 on Device 6810 is not Active.\n", + __func__); + return 0; + } + + /* + * 6th Lane (#5) on Device 6810 is Active, even though 6810 + * has only 5 lanes + */ + if (sys_env_device_id_get() == MV_6810 && lane_num == 5) + return 1; + + if (lane_num >= hws_serdes_get_max_lane()) + ret = 0; + + return ret; +} + +int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset, + u32 *unit_base_reg, u32 *unit_offset) +{ + *unit_base_reg = base_addr; + *unit_offset = unit_base_offset; + + return MV_OK; +} + +/* + * hws_serdes_get_phy_selector_val + * + * DESCRIPTION: Get the mapping of Serdes Selector values according to the + * Serdes revision number + * INPUT: serdes_num - Serdes number + * serdes_type - Serdes type + * OUTPUT: None + * RETURN: + * Mapping of Serdes Selector values + */ +u32 hws_serdes_get_phy_selector_val(int serdes_num, + enum serdes_type serdes_type) +{ + if (serdes_type >= LAST_SERDES_TYPE) + return 0xff; + + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) { + return selectors_serdes_rev1_map + [serdes_type][serdes_num]; + } else + return selectors_serdes_rev2_map + [serdes_type][serdes_num]; +} + +u32 hws_get_physical_serdes_num(u32 serdes_num) +{ + if ((serdes_num == 4) && (sys_env_device_id_get() == MV_6810)) { + /* + * For 6810, there are 5 Serdes and Serdes Num 4 doesn't + * exist. Instead Serdes Num 5 is connected. + */ + return 5; + } else { + return serdes_num; + } +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c new file mode 100644 index 0000000..23af769 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c @@ -0,0 +1,2228 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_env_spec.h" +#include "high_speed_topology_spec.h" +#include "sys_env_lib.h" +#include "ctrl_pex.h" + +#if defined(CONFIG_ARMADA_38X) +#elif defined(CONFIG_ARMADA_39X) +#else +#error "No device is defined" +#endif + +/* + * The board topology map, initialized in the beginning of + * ctrl_high_speed_serdes_phy_config + */ +struct serdes_map serdes_configuration_map[MAX_SERDES_LANES]; + +/* + * serdes_seq_db - holds all serdes sequences, their size and the + * relevant index in the data array initialized in serdes_seq_init + */ +struct cfg_seq serdes_seq_db[SERDES_LAST_SEQ]; + +#define SERDES_VERION "2.0" +#define ENDED_OK "High speed PHY - Ended Successfully\n" + +#define LINK_WAIT_CNTR 100 +#define LINK_WAIT_SLEEP 100 + +#define MAX_UNIT_NUMB 4 +#define TOPOLOGY_TEST_OK 0 +#define WRONG_NUMBER_OF_UNITS 1 +#define SERDES_ALREADY_IN_USE 2 +#define UNIT_NUMBER_VIOLATION 3 + +/* + * serdes_lane_in_use_count contains the exact amount of serdes lanes + * needed per type + */ +u8 serdes_lane_in_use_count[MAX_UNITS_ID][MAX_UNIT_NUMB] = { + /* 0 1 2 3 */ + { 1, 1, 1, 1 }, /* PEX */ + { 1, 1, 1, 1 }, /* ETH_GIG */ + { 1, 1, 0, 0 }, /* USB3H */ + { 1, 1, 1, 0 }, /* USB3D */ + { 1, 1, 1, 1 }, /* SATA */ + { 1, 0, 0, 0 }, /* QSGMII */ + { 4, 0, 0, 0 }, /* XAUI */ + { 2, 0, 0, 0 } /* RXAUI */ +}; + +/* + * serdes_unit_count count unit number. + * (i.e a single XAUI is counted as 1 unit) + */ +u8 serdes_unit_count[MAX_UNITS_ID] = { 0 }; + +/* Selector mapping for A380-A0 and A390-Z1 */ +u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = { + /* 0 1 2 3 4 5 6 */ + { 0x1, 0x1, NA, NA, NA, NA, NA }, /* PEX0 */ + { NA, NA, 0x1, NA, 0x1, NA, 0x1 }, /* PEX1 */ + { NA, NA, NA, NA, 0x7, 0x1, NA }, /* PEX2 */ + { NA, NA, NA, 0x1, NA, NA, NA }, /* PEX3 */ + { 0x2, 0x3, NA, NA, NA, NA, NA }, /* SATA0 */ + { NA, NA, 0x3, NA, NA, NA, NA }, /* SATA1 */ + { NA, NA, NA, NA, 0x6, 0x2, NA }, /* SATA2 */ + { NA, NA, NA, 0x3, NA, NA, NA }, /* SATA3 */ + { 0x3, 0x4, NA, NA, NA, NA, NA }, /* SGMII0 */ + { NA, 0x5, 0x4, NA, 0x3, NA, NA }, /* SGMII1 */ + { NA, NA, NA, 0x4, NA, 0x3, NA }, /* SGMII2 */ + { NA, 0x7, NA, NA, NA, NA, NA }, /* QSGMII */ + { NA, 0x6, NA, NA, 0x4, NA, NA }, /* USB3_HOST0 */ + { NA, NA, NA, 0x5, NA, 0x4, NA }, /* USB3_HOST1 */ + { NA, NA, NA, 0x6, 0x5, 0x5, NA }, /* USB3_DEVICE */ +#ifdef CONFIG_ARMADA_39X + { NA, NA, 0x5, NA, 0x8, NA, 0x2 }, /* SGMII3 */ + { NA, NA, NA, 0x8, 0x9, 0x8, 0x4 }, /* XAUI */ + { NA, NA, NA, NA, NA, 0x8, 0x4 }, /* RXAUI */ +#endif + { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, NA } /* DEFAULT_SERDES */ +}; + +/* Selector mapping for PEX by 4 confiuration */ +u8 common_phys_selectors_pex_by4_lanes[] = { 0x1, 0x2, 0x2, 0x2 }; + +static const char *const serdes_type_to_string[] = { + "PCIe0", + "PCIe1", + "PCIe2", + "PCIe3", + "SATA0", + "SATA1", + "SATA2", + "SATA3", + "SGMII0", + "SGMII1", + "SGMII2", + "QSGMII", + "USB3 HOST0", + "USB3 HOST1", + "USB3 DEVICE", + "SGMII3", + "XAUI", + "RXAUI", + "DEFAULT SERDES", + "LAST_SERDES_TYPE" +}; + +struct serdes_unit_data { + u8 serdes_unit_id; + u8 serdes_unit_num; +}; + +static struct serdes_unit_data serdes_type_to_unit_info[] = { + {PEX_UNIT_ID, 0,}, + {PEX_UNIT_ID, 1,}, + {PEX_UNIT_ID, 2,}, + {PEX_UNIT_ID, 3,}, + {SATA_UNIT_ID, 0,}, + {SATA_UNIT_ID, 1,}, + {SATA_UNIT_ID, 2,}, + {SATA_UNIT_ID, 3,}, + {ETH_GIG_UNIT_ID, 0,}, + {ETH_GIG_UNIT_ID, 1,}, + {ETH_GIG_UNIT_ID, 2,}, + {QSGMII_UNIT_ID, 0,}, + {USB3H_UNIT_ID, 0,}, + {USB3H_UNIT_ID, 1,}, + {USB3D_UNIT_ID, 0,}, + {ETH_GIG_UNIT_ID, 3,}, + {XAUI_UNIT_ID, 0,}, + {RXAUI_UNIT_ID, 0,}, +}; + +/* Sequences DB */ + +/* + * SATA and SGMII + */ + +struct op_params sata_port0_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Access to reg 0x48(OOB param 1) */ + {SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0}, + /* OOB Com_wake and Com_reset spacing upper limit data */ + {SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0}, + /* Access to reg 0xa(PHY Control) */ + {SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0}, + /* Rx clk and Tx clk select non-inverted mode */ + {SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0}, + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0}, + /* Power Down Sata Port 0 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40040,}, 0, 0}, +}; + +struct op_params sata_port1_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Access to reg 0x48(OOB param 1) */ + {SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0}, + /* OOB Com_wake and Com_reset spacing upper limit data */ + {SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0}, + /* Access to reg 0xa(PHY Control) */ + {SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0}, + /* Rx clk and Tx clk select non-inverted mode */ + {SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0}, + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0}, + /* Power Down Sata Port 1 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc44000,}, 0, 0}, +}; + +/* SATA and SGMII - power up seq */ +struct op_params sata_and_sgmii_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + /* Power Up */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x90006, {0x80002, 0x80002}, + 0, 0}, + /* Unreset */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0x6000}, 0, 0}, + /* Phy Selector */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x0e0, {0x0, 0x80}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x440, {0x440, 0x400}, 0, 0} +}; + +/* SATA and SGMII - speed config seq */ +struct op_params sata_and_sgmii_speed_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, + * SGMII (1.25G), SGMII (3.125G), wait_time, num_of_loops + */ + /* Baud Rate */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000, + {0x8800000, 0x19800000, 0x22000000}, 0, 0}, + /* Select Baud Rate for SATA only */ + {INTERFACE_REG, 0x800, 0xc00, {0x800, NO_DATA, NO_DATA}, 0, 0}, + /* Phy Gen RX and TX */ + {ISOLATE_REG, 0x800, 0xff, {NO_DATA, 0x66, 0x66}, 0, 0}, + /* Bus Width */ + {LOOPBACK_REG, 0x800, 0xe, {0x4, 0x2, 0x2}, 0, 0} +}; + +/* SATA and SGMII - TX config seq */ +struct op_params sata_and_sgmii_tx_config_params1[] = { + /* + * unitunit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + {GLUE_REG, 0x800, 0x1800, {NO_DATA, 0x800}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0}, + /* Power up PLL, RX and TX */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0000, {0x70000, 0x70000}, + 0, 0} +}; + +struct op_params sata_port0_tx_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0}, + /* Power Down Sata Port 0 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40000}, 0, 0}, + /* Regret bit addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0}, + /* Regret bit data */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0} +}; + +struct op_params sata_port1_tx_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* Power Down Sata addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0}, + /* Power Down Sata Port 1 */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc40000}, 0, 0}, + /* Regret bit addr */ + {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0}, + /* Regret bit data */ + {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0} +}; + +struct op_params sata_and_sgmii_tx_config_serdes_rev1_params2[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000}, + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000} +}; + +struct op_params sata_and_sgmii_tx_config_serdes_rev2_params2[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, SGMII data, + * wait_time, num_of_loops + */ + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000}, + /* Assert Rx Init for SGMII */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x40000000}, + 0, 0}, + /* Assert Rx Init for SATA */ + {ISOLATE_REG, 0x800, 0x400, {0x400, NA}, 0, 0}, + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000}, + /* De-assert Rx Init for SGMII */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x0}, 0, 0}, + /* De-assert Rx Init for SATA */ + {ISOLATE_REG, 0x800, 0x400, {0x0, NA}, 0, 0}, + /* os_ph_offset_force (align 90) */ + {RX_REG3, 0x800, 0xff, {0xde, NO_DATA}, 0, 0}, + /* Set os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0}, + /* Unset os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0}, +}; + +struct op_params sata_electrical_config_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* enable SSC and DFE update enable */ + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000,}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000,}, 0, 0}, + /* SQ_THRESH and FFE Setting */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x6cf,}, 0, 0}, + /* G1_TX SLEW, EMPH1 and AMP */ + {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32,}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9,}, 0, 0}, + /* G2_TX SLEW, EMPH1 and AMP */ + {G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c,}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0}, + /* G3_TX SLEW, EMPH1 and AMP */ + {G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e,}, 0, 0}, + /* G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G3_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0}, + /* Cal rxclkalign90 ext enable and Cal os ph ext */ + {CAL_REG6, 0x800, 0xff00, {0xdd00,}, 0, 0}, + /* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0}, +}; + +struct op_params sata_electrical_config_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, SATA data, wait_time, + * num_of_loops + */ + /* SQ_THRESH and FFE Setting */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xf00, {0x600}, 0, 0}, + /* enable SSC and DFE update enable */ + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000}, 0, 0}, + /* G1_TX SLEW, EMPH1 and AMP */ + {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G2_TX SLEW, EMPH1 and AMP */ + {G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, + /* G3_TX SLEW, EMPH1 and AMP */ + {G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e}, 0, 0}, + /* + * G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI & DFE_En Gen3, + * DC wander calibration dis + */ + {G3_SETTINGS_1_REG, 0x800, 0x47ff, {0x7d2}, 0, 0}, + /* Bit[12]=0x0 idle_sync_en */ + {PCIE_REG0, 0x800, 0x1000, {0x0}, 0, 0}, + /* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, + /* DFE_STEP_FINE_FX[3:0] =0xa */ + {DFE_REG0, 0x800, 0xa00f, {0x800a}, 0, 0}, + /* DFE_EN and Dis Update control from pin disable */ + {DFE_REG3, 0x800, 0xc000, {0x0}, 0, 0}, + /* FFE Force FFE_REs and cap settings for Gen1 */ + {G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0}, + /* FFE Force FFE_REs and cap settings for Gen2 */ + {G2_SETTINGS_3_REG, 0x800, 0xff, {0xbf}, 0, 0}, + /* FE Force FFE_REs=4 and cap settings for Gen3n */ + {G3_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0}, + /* Set DFE Gen 3 Resolution to 3 */ + {G3_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0}, +}; + +struct op_params sgmii_electrical_config_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G), + * wait_time, num_of_loops + */ + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0}, + /* SQ_THRESH and FFE Setting */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x8f, 0xbf}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000, 0x4000}, 0, 0}, +}; + +struct op_params sgmii_electrical_config_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G), + * wait_time, num_of_loops + */ + /* Set Slew_rate, Emph and Amp */ + {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8fa, 0x8fa}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0}, + /* DTL_FLOOP_EN */ + {RX_REG2, 0x800, 0x4, {0x0, 0x0}, 0, 0}, + /* G1 FFE Setting Force, RES and CAP */ + {G1_SETTINGS_3_REG, 0x800, 0xff, {0x8f, 0xbf}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000, 0x3000}, 0, 0}, +}; + +/* + * PEX and USB3 + */ + +/* PEX and USB3 - power up seq for Serdes Rev 1.2 */ +struct op_params pex_and_usb3_power_up_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806, + {0x4471804, 0x4479804}, 0, 0}, + {COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0}, + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0}, + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0}, + {GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0} +}; + +/* PEX and USB3 - power up seq for Serdes Rev 2.1 */ +struct op_params pex_and_usb3_power_up_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806, + {0x4471804, 0x4479804}, 0, 0}, + {COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0}, + {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0}, + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0}, + {GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0}, + {GLOBAL_MISC_CTRL, 0x800, 0xc0, {0x0, NO_DATA}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0} +}; + +/* PEX and USB3 - speed config seq */ +struct op_params pex_and_usb3_speed_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + /* Maximal PHY Generation Setting */ + {INTERFACE_REG, 0x800, 0xc00, {0x400, 0x400, 0x400, 0x400, 0x400}, + 0, 0}, +}; + +struct op_params usb3_electrical_config_serdes_rev1_params[] = { + /* Spread Spectrum Clock Enable */ + {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0}, + /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */ + {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, + /* FFE Setting Force, RES and CAP */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xef}, 0, 0}, + /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0}, + /* cal_rxclkalign90_ext_en and cal_os_ph_ext */ + {CAL_REG6, 0x800, 0xff00, {0xd500}, 0, 0}, + /* vco_cal_vth_sel */ + {REF_REG0, 0x800, 0x38, {0x20}, 0, 0}, +}; + +struct op_params usb3_electrical_config_serdes_rev2_params[] = { + /* Spread Spectrum Clock Enable */ + {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0}, + /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */ + {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, + /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */ + {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0}, + /* vco_cal_vth_sel */ + {REF_REG0, 0x800, 0x38, {0x20}, 0, 0}, + /* Spread Spectrum Clock Enable */ + {LANE_CFG5_REG, 0x800, 0x4, {0x4}, 0, 0}, +}; + +/* PEX and USB3 - TX config seq */ + +/* + * For PEXx1: the pex_and_usb3_tx_config_params1/2/3 configurations should run + * one by one on the lane. + * For PEXx4: the pex_and_usb3_tx_config_params1/2/3 configurations should run + * by setting each sequence for all 4 lanes. + */ +struct op_params pex_and_usb3_tx_config_params1[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + {GLOBAL_CLK_CTRL, 0x800, 0x1, {0x0, 0x0}, 0, 0}, + /* 10ms delay */ + {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0}, + /* os_ph_offset_force (align 90) */ + {RX_REG3, 0x800, 0xff, {0xdc, NO_DATA}, 0, 0}, + /* Set os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0}, + /* Unset os_ph_valid */ + {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0}, +}; + +struct op_params pex_and_usb3_tx_config_params2[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0}, +}; + +struct op_params pex_and_usb3_tx_config_params3[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, USB3 data, + * wait_time, num_of_loops + */ + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0}, + /* 10ms delay */ + {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0} +}; + +/* PEX by 4 config seq */ +struct op_params pex_by4_config_params[] = { + /* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */ + {GLOBAL_CLK_SRC_HI, 0x800, 0x7, {0x5, 0x0, 0x0, 0x2}, 0, 0}, + /* Lane Alignement enable */ + {LANE_ALIGN_REG0, 0x800, 0x1000, {0x0, 0x0, 0x0, 0x0}, 0, 0}, + /* Max PLL phy config */ + {CALIBRATION_CTRL_REG, 0x800, 0x1000, {0x1000, 0x1000, 0x1000, 0x1000}, + 0, 0}, + /* Max PLL pipe config */ + {LANE_CFG1_REG, 0x800, 0x600, {0x600, 0x600, 0x600, 0x600}, 0, 0}, +}; + +/* USB3 device donfig seq */ +struct op_params usb3_device_config_params[] = { + /* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */ + {LANE_CFG4_REG, 0x800, 0x200, {0x200}, 0, 0} +}; + +/* PEX - electrical configuration seq Rev 1.2 */ +struct op_params pex_electrical_config_serdes_rev1_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */ + {G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* CFG_DFE_EN_SEL */ + {LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0}, + /* FFE Setting Force, RES and CAP */ + {SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xaf}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, + /* cal_rxclkalign90_ext_en and cal_os_ph_ext */ + {CAL_REG6, 0x800, 0xff00, {0xdc00}, 0, 0}, +}; + +/* PEX - electrical configuration seq Rev 2.1 */ +struct op_params pex_electrical_config_serdes_rev2_params[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */ + {G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0}, + /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G1 FFE Setting Force, RES and CAP */ + {G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0}, + /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0}, + /* G2 FFE Setting Force, RES and CAP */ + {G2_SETTINGS_3_REG, 0x800, 0xff, {0xaf}, 0, 0}, + /* G2 DFE resolution value */ + {G2_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0}, + /* DFE resolution force */ + {DFE_REG0, 0x800, 0x8000, {0x8000}, 0, 0}, + /* Tx amplitude for Tx Margin 0 */ + {PCIE_REG1, 0x800, 0xf80, {0xd00}, 0, 0}, + /* Tx_Emph value for -3.5d_b and -6d_b */ + {PCIE_REG3, 0x800, 0xff00, {0xaf00}, 0, 0}, + /* CFG_DFE_EN_SEL */ + {LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0}, + /* tximpcal_th and rximpcal_th */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, +}; + +/* PEX - configuration seq for REF_CLOCK_25MHz */ +struct op_params pex_config_ref_clock25_m_hz[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* Bits[4:0]=0x2 - REF_FREF_SEL */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x2}, 0, 0}, + /* Bit[10]=0x1 - REFCLK_SEL */ + {MISC_REG, 0x800, 0x400, {0x400}, 0, 0}, + /* Bits[7:0]=0x7 - CFG_PM_RXDLOZ_WAIT */ + {GLOBAL_PM_CTRL, 0x800, 0xff, {0x7}, 0, 0}, +}; + +/* PEX - configuration seq for REF_CLOCK_40MHz */ +struct op_params pex_config_ref_clock40_m_hz[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* Bits[4:0]=0x3 - REF_FREF_SEL */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x3}, 0, 0}, + /* Bits[10]=0x1 - REFCLK_SEL */ + {MISC_REG, 0x800, 0x400, {0x400}, 0, 0}, + /* Bits[7:0]=0xc - CFG_PM_RXDLOZ_WAIT */ + {GLOBAL_PM_CTRL, 0x800, 0xff, {0xc}, 0, 0}, +}; + +/* PEX - configuration seq for REF_CLOCK_100MHz */ +struct op_params pex_config_ref_clock100_m_hz[] = { + /* + * unit_base_reg, unit_offset, mask, PEX data, wait_time, + * num_of_loops + */ + /* Bits[4:0]=0x0 - REF_FREF_SEL */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x0}, 0, 0}, + /* Bit[10]=0x0 - REFCLK_SEL */ + {MISC_REG, 0x800, 0x400, {0x0}, 0, 0}, + /* Bits[7:0]=0x1e - CFG_PM_RXDLOZ_WAIT */ + {GLOBAL_PM_CTRL, 0x800, 0xff, {0x1e}, 0, 0}, +}; + +/* + * USB2 + */ + +struct op_params usb2_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, USB2 data, wait_time, + * num_of_loops + */ + /* Init phy 0 */ + {0x18440, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0}, + /* Init phy 1 */ + {0x18444, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0}, + /* Init phy 2 */ + {0x18448, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0}, + /* Phy offset 0x0 - PLL_CONTROL0 */ + {0xc0000, 0x0 /*NA*/, 0xffffffff, {0x40605205}, 0, 0}, + {0xc001c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0}, + {0xc201c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0}, + {0xc401c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0}, + /* Phy offset 0x1 - PLL_CONTROL1 */ + {0xc0004, 0x0 /*NA*/, 0x1, {0x1}, 0, 0}, + /* Phy0 register 3 - TX Channel control 0 */ + {0xc000c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0}, + /* Phy0 register 3 - TX Channel control 0 */ + {0xc200c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0}, + /* Phy0 register 3 - TX Channel control 0 */ + {0xc400c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0}, + /* check PLLCAL_DONE is set and IMPCAL_DONE is set */ + {0xc0008, 0x0 /*NA*/, 0x80800000, {0x80800000}, 1, 1000}, + /* check REG_SQCAL_DONE is set */ + {0xc0018, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000}, + /* check PLL_READY is set */ + {0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000} +}; + +/* + * QSGMII + */ + +/* QSGMII - power up seq */ +struct op_params qsgmii_port_power_up_params[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Connect the QSGMII to Gigabit Ethernet units */ + {QSGMII_CONTROL_REG1, 0x0, 0x40000000, {0x40000000}, 0, 0}, + /* Power Up */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0006, {0x80002}, 0, 0}, + /* Unreset */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000}, 0, 0}, + /* Phy Selector */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0xff, {0xfc81}, 0, 0}, + /* Ref clock source select */ + {MISC_REG, 0x800, 0x4c0, {0x480}, 0, 0} +}; + +/* QSGMII - speed config seq */ +struct op_params qsgmii_port_speed_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Baud Rate */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000, {0xcc00000}, 0, 0}, + /* Phy Gen RX and TX */ + {ISOLATE_REG, 0x800, 0xff, {0x33}, 0, 0}, + /* Bus Width */ + {LOOPBACK_REG, 0x800, 0xe, {0x2}, 0, 0} +}; + +/* QSGMII - Select electrical param seq */ +struct op_params qsgmii_port_electrical_config_params[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Slew rate and emphasis */ + {G1_SETTINGS_0_REG, 0x800, 0x8000, {0x0}, 0, 0} +}; + +/* QSGMII - TX config seq */ +struct op_params qsgmii_port_tx_config_params1[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + {GLUE_REG, 0x800, 0x1800, {0x800}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x401}, 0, 0}, + /* Sft Reset pulse */ + {RESET_DFE_REG, 0x800, 0x401, {0x0}, 0, 0}, + /* Lane align */ + {LANE_ALIGN_REG0, 0x800, 0x1000, {0x1000}, 0, 0}, + /* Power up PLL, RX and TX */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x70000, {0x70000}, 0, 0}, + /* Tx driver output idle */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x80000, {0x80000}, 0, 0} +}; + +struct op_params qsgmii_port_tx_config_params2[] = { + /* + * unit_base_reg, unit_offset, mask, QSGMII data, wait_time, + * num_of_loops + */ + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc}, 10, 1000}, + /* Assert Rx Init and Tx driver output valid */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40080000, {0x40000000}, 0, 0}, + /* Wait for PHY power up sequence to finish */ + {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1}, 1, 1000}, + /* De-assert Rx Init */ + {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {0x0}, 0, 0} +}; + +/* SERDES_POWER_DOWN */ +struct op_params serdes_power_down_params[] = { + {COMMON_PHY_CONFIGURATION1_REG, 0x28, (0xf << 11), {(0x3 << 11)}, + 0, 0}, + {COMMON_PHY_CONFIGURATION1_REG, 0x28, (0x7 << 16), {0}, 0, 0} +}; + +/* + * hws_ctrl_serdes_rev_get + * + * DESCRIPTION: Get the Serdes revision number + * + * INPUT: config_field - Field description enum + * + * OUTPUT: None + * + * RETURN: + * 8bit Serdes revision number + */ +u8 hws_ctrl_serdes_rev_get(void) +{ +#ifdef CONFIG_ARMADA_38X + /* for A38x-Z1 */ + if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID) + return MV_SERDES_REV_1_2; +#endif + + /* for A39x-Z1, A38x-A0 */ + return MV_SERDES_REV_2_1; +} + +u32 hws_serdes_topology_verify(enum serdes_type serdes_type, u32 serdes_id, + enum serdes_mode serdes_mode) +{ + u32 test_result = 0; + u8 serd_max_num, unit_numb; + enum unit_id unit_id; + + if (serdes_type > RXAUI) { + printf("%s: Warning: Wrong serdes type %s serdes#%d\n", + __func__, serdes_type_to_string[serdes_type], serdes_id); + return MV_FAIL; + } + + unit_id = serdes_type_to_unit_info[serdes_type].serdes_unit_id; + unit_numb = serdes_type_to_unit_info[serdes_type].serdes_unit_num; + serd_max_num = sys_env_unit_max_num_get(unit_id); + + /* if didn't exceed amount of required Serdes lanes for current type */ + if (serdes_lane_in_use_count[unit_id][unit_numb] != 0) { + /* update amount of required Serdes lanes for current type */ + serdes_lane_in_use_count[unit_id][unit_numb]--; + + /* + * If reached the exact amount of required Serdes lanes for + * current type + */ + if (serdes_lane_in_use_count[unit_id][unit_numb] == 0) { + if (((serdes_type <= PEX3)) && + ((serdes_mode == PEX_END_POINT_X4) || + (serdes_mode == PEX_ROOT_COMPLEX_X4))) { + /* PCiex4 uses 2 SerDes */ + serdes_unit_count[PEX_UNIT_ID] += 2; + } else { + serdes_unit_count[unit_id]++; + } + + /* test SoC unit count limitation */ + if (serdes_unit_count[unit_id] > serd_max_num) { + test_result = WRONG_NUMBER_OF_UNITS; + } else if (unit_numb >= serd_max_num) { + /* test SoC unit number limitation */ + test_result = UNIT_NUMBER_VIOLATION; + } + } + } else { + test_result = SERDES_ALREADY_IN_USE; + if (test_result == SERDES_ALREADY_IN_USE) { + printf("%s: Error: serdes lane %d is configured to type %s: type already in use\n", + __func__, serdes_id, + serdes_type_to_string[serdes_type]); + return MV_FAIL; + } else if (test_result == WRONG_NUMBER_OF_UNITS) { + printf("%s: Warning: serdes lane %d is set to type %s.\n", + __func__, serdes_id, + serdes_type_to_string[serdes_type]); + printf("%s: Maximum supported lanes are already set to this type (limit = %d)\n", + __func__, serd_max_num); + return MV_FAIL; + } else if (test_result == UNIT_NUMBER_VIOLATION) { + printf("%s: Warning: serdes lane %d type is %s: current device support only %d units of this type.\n", + __func__, serdes_id, + serdes_type_to_string[serdes_type], + serd_max_num); + return MV_FAIL; + } + } + + return MV_OK; +} + +void hws_serdes_xaui_topology_verify(void) +{ + /* + * If XAUI is in use - serdes_lane_in_use_count has to be = 0; + * if it is not in use hast be = 4 + */ + if ((serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 0) && + (serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 4)) { + printf("%s: Warning: wrong number of lanes is set to XAUI - %d\n", + __func__, serdes_lane_in_use_count[XAUI_UNIT_ID][0]); + printf("%s: XAUI has to be defined on 4 lanes\n", __func__); + } + + /* + * If RXAUI is in use - serdes_lane_in_use_count has to be = 0; + * if it is not in use hast be = 2 + */ + if ((serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 0) && + (serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 2)) { + printf("%s: Warning: wrong number of lanes is set to RXAUI - %d\n", + __func__, serdes_lane_in_use_count[RXAUI_UNIT_ID][0]); + printf("%s: RXAUI has to be defined on 2 lanes\n", __func__); + } +} + +int hws_serdes_seq_db_init(void) +{ + u8 serdes_rev = hws_ctrl_serdes_rev_get(); + + DEBUG_INIT_FULL_S("\n### serdes_seq38x_init ###\n"); + + if (serdes_rev == MV_SERDES_REV_NA) { + printf("hws_serdes_seq_db_init: serdes revision number is not supported\n"); + return MV_NOT_SUPPORTED; + } + + /* SATA_PORT_0_ONLY_POWER_UP_SEQ sequence init */ + serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].op_params_ptr = + sata_port0_power_up_params; + serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_port0_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].data_arr_idx = SATA; + + /* SATA_PORT_1_ONLY_POWER_UP_SEQ sequence init */ + serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].op_params_ptr = + sata_port1_power_up_params; + serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_port1_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].data_arr_idx = SATA; + + /* SATA_POWER_UP_SEQ sequence init */ + serdes_seq_db[SATA_POWER_UP_SEQ].op_params_ptr = + sata_and_sgmii_power_up_params; + serdes_seq_db[SATA_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SATA_POWER_UP_SEQ].data_arr_idx = SATA; + + /* SATA_1_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_3_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_6_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sata_electrical_config_serdes_rev1_params; + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sata_electrical_config_serdes_rev2_params; + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_TX_CONFIG_SEQ1].op_params_ptr = + sata_and_sgmii_tx_config_params1; + serdes_seq_db[SATA_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[SATA_TX_CONFIG_SEQ1].data_arr_idx = SATA; + + /* SATA_PORT_0_ONLY_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].op_params_ptr = + sata_port0_tx_config_params; + serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_port0_tx_config_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_PORT_1_ONLY_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].op_params_ptr = + sata_port1_tx_config_params; + serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_port1_tx_config_params) / sizeof(struct op_params); + serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA; + + /* SATA_TX_CONFIG_SEQ2 sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev1_params2; + serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) / + sizeof(struct op_params); + } else { + serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev2_params2; + serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) / + sizeof(struct op_params); + } + serdes_seq_db[SATA_TX_CONFIG_SEQ2].data_arr_idx = SATA; + + /* SGMII_POWER_UP_SEQ sequence init */ + serdes_seq_db[SGMII_POWER_UP_SEQ].op_params_ptr = + sata_and_sgmii_power_up_params; + serdes_seq_db[SGMII_POWER_UP_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params); + serdes_seq_db[SGMII_POWER_UP_SEQ].data_arr_idx = SGMII; + + /* SGMII_1_25_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].data_arr_idx = SGMII; + + /* SGMII_3_125_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].op_params_ptr = + sata_and_sgmii_speed_config_params; + serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(sata_and_sgmii_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].data_arr_idx = SGMII_3_125; + + /* SGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sgmii_electrical_config_serdes_rev1_params; + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sgmii_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + sgmii_electrical_config_serdes_rev2_params; + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(sgmii_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SGMII; + + /* SGMII_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[SGMII_TX_CONFIG_SEQ1].op_params_ptr = + sata_and_sgmii_tx_config_params1; + serdes_seq_db[SGMII_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[SGMII_TX_CONFIG_SEQ1].data_arr_idx = SGMII; + + /* SGMII_TX_CONFIG_SEQ sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev1_params2; + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) / + sizeof(struct op_params); + } else { + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr = + sata_and_sgmii_tx_config_serdes_rev2_params2; + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) / + sizeof(struct op_params); + } + serdes_seq_db[SGMII_TX_CONFIG_SEQ2].data_arr_idx = SGMII; + + /* PEX_POWER_UP_SEQ sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev1_params; + serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev2_params; + serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[PEX_POWER_UP_SEQ].data_arr_idx = PEX; + + /* PEX_2_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].data_arr_idx = + PEXSERDES_SPEED_2_5_GBPS; + + /* PEX_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].data_arr_idx = + PEXSERDES_SPEED_5_GBPS; + + /* PEX_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + pex_electrical_config_serdes_rev1_params; + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + pex_electrical_config_serdes_rev2_params; + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].data_arr_idx = PEX; + + /* PEX_TX_CONFIG_SEQ1 sequence init */ + serdes_seq_db[PEX_TX_CONFIG_SEQ1].op_params_ptr = + pex_and_usb3_tx_config_params1; + serdes_seq_db[PEX_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[PEX_TX_CONFIG_SEQ1].data_arr_idx = PEX; + + /* PEX_TX_CONFIG_SEQ2 sequence init */ + serdes_seq_db[PEX_TX_CONFIG_SEQ2].op_params_ptr = + pex_and_usb3_tx_config_params2; + serdes_seq_db[PEX_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params); + serdes_seq_db[PEX_TX_CONFIG_SEQ2].data_arr_idx = PEX; + + /* PEX_TX_CONFIG_SEQ3 sequence init */ + serdes_seq_db[PEX_TX_CONFIG_SEQ3].op_params_ptr = + pex_and_usb3_tx_config_params3; + serdes_seq_db[PEX_TX_CONFIG_SEQ3].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params); + serdes_seq_db[PEX_TX_CONFIG_SEQ3].data_arr_idx = PEX; + + /* PEX_BY_4_CONFIG_SEQ sequence init */ + serdes_seq_db[PEX_BY_4_CONFIG_SEQ].op_params_ptr = + pex_by4_config_params; + serdes_seq_db[PEX_BY_4_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_by4_config_params) / sizeof(struct op_params); + serdes_seq_db[PEX_BY_4_CONFIG_SEQ].data_arr_idx = PEX; + + /* PEX_CONFIG_REF_CLOCK_25MHZ_SEQ sequence init */ + serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].op_params_ptr = + pex_config_ref_clock25_m_hz; + serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].cfg_seq_size = + sizeof(pex_config_ref_clock25_m_hz) / sizeof(struct op_params); + serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].data_arr_idx = PEX; + + /* PEX_ELECTRICAL_CONFIG_REF_CLOCK_40MHZ_SEQ sequence init */ + serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].op_params_ptr = + pex_config_ref_clock40_m_hz; + serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].cfg_seq_size = + sizeof(pex_config_ref_clock40_m_hz) / sizeof(struct op_params); + serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].data_arr_idx = PEX; + + /* PEX_CONFIG_REF_CLOCK_100MHZ_SEQ sequence init */ + serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].op_params_ptr = + pex_config_ref_clock100_m_hz; + serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].cfg_seq_size = + sizeof(pex_config_ref_clock100_m_hz) / sizeof(struct op_params); + serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].data_arr_idx = PEX; + + /* USB3_POWER_UP_SEQ sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev1_params; + serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr = + pex_and_usb3_power_up_serdes_rev2_params; + serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_power_up_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[USB3_POWER_UP_SEQ].data_arr_idx = USB3; + + /* USB3_HOST_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].data_arr_idx = + USB3SERDES_SPEED_5_GBPS_HOST; + + /* USB3_DEVICE_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].op_params_ptr = + pex_and_usb3_speed_config_params; + serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params); + serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].data_arr_idx = + USB3SERDES_SPEED_5_GBPS_DEVICE; + + /* USB3_ELECTRICAL_CONFIG_SEQ seq sequence init */ + if (serdes_rev == MV_SERDES_REV_1_2) { + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + usb3_electrical_config_serdes_rev1_params; + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(usb3_electrical_config_serdes_rev1_params) / + sizeof(struct op_params); + } else { + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + usb3_electrical_config_serdes_rev2_params; + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(usb3_electrical_config_serdes_rev2_params) / + sizeof(struct op_params); + } + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = USB3; + + /* USB3_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_TX_CONFIG_SEQ1].op_params_ptr = + pex_and_usb3_tx_config_params1; + serdes_seq_db[USB3_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params); + serdes_seq_db[USB3_TX_CONFIG_SEQ1].data_arr_idx = USB3; + + /* USB3_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_TX_CONFIG_SEQ2].op_params_ptr = + pex_and_usb3_tx_config_params2; + serdes_seq_db[USB3_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params); + serdes_seq_db[USB3_TX_CONFIG_SEQ2].data_arr_idx = USB3; + + /* USB3_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_TX_CONFIG_SEQ3].op_params_ptr = + pex_and_usb3_tx_config_params3; + serdes_seq_db[USB3_TX_CONFIG_SEQ3].cfg_seq_size = + sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params); + serdes_seq_db[USB3_TX_CONFIG_SEQ3].data_arr_idx = USB3; + + /* USB2_POWER_UP_SEQ sequence init */ + serdes_seq_db[USB2_POWER_UP_SEQ].op_params_ptr = usb2_power_up_params; + serdes_seq_db[USB2_POWER_UP_SEQ].cfg_seq_size = + sizeof(usb2_power_up_params) / sizeof(struct op_params); + serdes_seq_db[USB2_POWER_UP_SEQ].data_arr_idx = 0; + + /* USB3_DEVICE_CONFIG_SEQ sequence init */ + serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].op_params_ptr = + usb3_device_config_params; + serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].cfg_seq_size = + sizeof(usb3_device_config_params) / sizeof(struct op_params); + serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].data_arr_idx = 0; /* Not relevant */ + + /* SERDES_POWER_DOWN_SEQ sequence init */ + serdes_seq_db[SERDES_POWER_DOWN_SEQ].op_params_ptr = + serdes_power_down_params; + serdes_seq_db[SERDES_POWER_DOWN_SEQ].cfg_seq_size = + sizeof(serdes_power_down_params) / + sizeof(struct op_params); + serdes_seq_db[SERDES_POWER_DOWN_SEQ].data_arr_idx = FIRST_CELL; + + if (serdes_rev == MV_SERDES_REV_2_1) { + /* QSGMII_POWER_UP_SEQ sequence init */ + serdes_seq_db[QSGMII_POWER_UP_SEQ].op_params_ptr = + qsgmii_port_power_up_params; + serdes_seq_db[QSGMII_POWER_UP_SEQ].cfg_seq_size = + sizeof(qsgmii_port_power_up_params) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_POWER_UP_SEQ].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_5_SPEED_CONFIG_SEQ sequence init */ + serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].op_params_ptr = + qsgmii_port_speed_config_params; + serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].cfg_seq_size = + sizeof(qsgmii_port_speed_config_params) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */ + serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr = + qsgmii_port_electrical_config_params; + serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size = + sizeof(qsgmii_port_electrical_config_params) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].op_params_ptr = + qsgmii_port_tx_config_params1; + serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].cfg_seq_size = + sizeof(qsgmii_port_tx_config_params1) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].data_arr_idx = + QSGMII_SEQ_IDX; + + /* QSGMII_TX_CONFIG_SEQ sequence init */ + serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].op_params_ptr = + qsgmii_port_tx_config_params2; + serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].cfg_seq_size = + sizeof(qsgmii_port_tx_config_params2) / + sizeof(struct op_params); + serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].data_arr_idx = + QSGMII_SEQ_IDX; + } + + return MV_OK; +} + +enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type, + enum serdes_speed baud_rate) +{ + enum serdes_seq seq_id = SERDES_LAST_SEQ; + + DEBUG_INIT_FULL_S("\n### serdes_type_and_speed_to_speed_seq ###\n"); + switch (serdes_type) { + case PEX0: + case PEX1: + case PEX2: + case PEX3: + if (baud_rate == SERDES_SPEED_2_5_GBPS) + seq_id = PEX_2_5_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_5_GBPS) + seq_id = PEX_5_SPEED_CONFIG_SEQ; + break; + case USB3_HOST0: + case USB3_HOST1: + if (baud_rate == SERDES_SPEED_5_GBPS) + seq_id = USB3_HOST_SPEED_CONFIG_SEQ; + break; + case USB3_DEVICE: + if (baud_rate == SERDES_SPEED_5_GBPS) + seq_id = USB3_DEVICE_SPEED_CONFIG_SEQ; + break; + case SATA0: + case SATA1: + case SATA2: + case SATA3: + if (baud_rate == SERDES_SPEED_1_5_GBPS) + seq_id = SATA_1_5_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_3_GBPS) + seq_id = SATA_3_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_6_GBPS) + seq_id = SATA_6_SPEED_CONFIG_SEQ; + break; + case SGMII0: + case SGMII1: + case SGMII2: +#ifdef CONFIG_ARMADA_39X + case SGMII3: +#endif + if (baud_rate == SERDES_SPEED_1_25_GBPS) + seq_id = SGMII_1_25_SPEED_CONFIG_SEQ; + else if (baud_rate == SERDES_SPEED_3_125_GBPS) + seq_id = SGMII_3_125_SPEED_CONFIG_SEQ; + break; + case QSGMII: + seq_id = QSGMII_5_SPEED_CONFIG_SEQ; + break; +#ifdef CONFIG_ARMADA_39X + case XAUI: + seq_id = XAUI_3_125_SPEED_CONFIG_SEQ; + break; + case RXAUI: + seq_id = RXAUI_6_25_SPEED_CONFIG_SEQ; + break; +#endif + default: + return SERDES_LAST_SEQ; + } + + return seq_id; +} + +/* + * This is the weak default function for the Marvell evaluation or + * development boarrds. Like the DB-88F6820-GP and others. + * Custom boards should define this function in their board + * code (board directory). And overwrite this default function + * with this custom specific code. + */ +__weak int hws_board_topology_load(struct serdes_map *serdes_map_array) +{ + u32 board_id = mv_board_id_get(); + u32 board_id_index = mv_board_id_index_get(board_id); + + DEBUG_INIT_FULL_S("\n### hws_board_topology_load ###\n"); + /* getting board topology according to the board id */ + DEBUG_INIT_FULL_S("Getting board topology according to the board id\n"); + + CHECK_STATUS(load_topology_func_arr[board_id_index] (serdes_map_array)); + + return MV_OK; +} + +void print_topology_details(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + + DEBUG_INIT_S("board SerDes lanes topology details:\n"); + + DEBUG_INIT_S(" | Lane # | Speed | Type |\n"); + DEBUG_INIT_S(" --------------------------------\n"); + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + if (serdes_map_array[lane_num].serdes_type == DEFAULT_SERDES) + continue; + DEBUG_INIT_S(" | "); + DEBUG_INIT_D(hws_get_physical_serdes_num(lane_num), 1); + DEBUG_INIT_S(" | "); + DEBUG_INIT_D(serdes_map_array[lane_num].serdes_speed, 2); + DEBUG_INIT_S(" | "); + DEBUG_INIT_S((char *) + serdes_type_to_string[serdes_map_array[lane_num]. + serdes_type]); + DEBUG_INIT_S("\t|\n"); + } + DEBUG_INIT_S(" --------------------------------\n"); +} + +int hws_pre_serdes_init_config(void) +{ + u32 data; + + /* + * Configure Core PLL + */ + /* + * set PLL parameters + * bits[2:0] =0x3 (Core-PLL Kdiv) + * bits[20:12]=0x9f (Core-PLL Ndiv) + * bits[24:21]=0x7(Core-PLL VCO Band) + * bits[28:25]=0x1(Core-PLL Rlf) + * bits[31:29]=0x2(Core-PLL charge-pump adjust) + */ + reg_write(CORE_PLL_PARAMETERS_REG, 0x42e9f003); + + /* Enable PLL Configuration */ + data = reg_read(CORE_PLL_CONFIG_REG); + data = SET_BIT(data, 9); + reg_write(CORE_PLL_CONFIG_REG, data); + + return MV_OK; +} + +int serdes_phy_config(void) +{ + DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n"); + + DEBUG_INIT_S("High speed PHY - Version: "); + DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S("\n"); + + /* Init serdes sequences DB */ + if (hws_serdes_seq_init() != MV_OK) { + printf("hws_ctrl_high_speed_serdes_phy_config: Error: Serdes initialization fail\n"); + return MV_FAIL; + } + + /* I2C init */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + /* Board topology load */ + DEBUG_INIT_FULL_S + ("ctrl_high_speed_serdes_phy_config: Loading board topology..\n"); + CHECK_STATUS(hws_board_topology_load(serdes_configuration_map)); + + /* print topology */ + print_topology_details(serdes_configuration_map); + CHECK_STATUS(hws_pre_serdes_init_config()); + + /* Power-Up sequence */ + DEBUG_INIT_FULL_S + ("ctrl_high_speed_serdes_phy_config: Starting serdes power up sequence\n"); + + CHECK_STATUS(hws_power_up_serdes_lanes(serdes_configuration_map)); + + DEBUG_INIT_FULL_S + ("\n### ctrl_high_speed_serdes_phy_config ended successfully ###\n"); + + DEBUG_INIT_S(ENDED_OK); + + return MV_OK; +} + +int serdes_polarity_config(u32 serdes_num, int is_rx) +{ + u32 data; + u32 reg_addr; + u8 bit_off = (is_rx) ? 11 : 10; + + reg_addr = SERDES_REGS_LANE_BASE_OFFSET(serdes_num) + SYNC_PATTERN_REG; + data = reg_read(reg_addr); + data = SET_BIT(data, bit_off); + reg_write(reg_addr, data); + + return MV_OK; +} + +int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map) +{ + u32 serdes_id, serdes_lane_num; + enum ref_clock ref_clock; + enum serdes_type serdes_type; + enum serdes_speed serdes_speed; + enum serdes_mode serdes_mode; + int serdes_rx_polarity_swap; + int serdes_tx_polarity_swap; + int is_pex_enabled = 0; + + /* + * is_pex_enabled: + * Flag which indicates that one of the Serdes is of PEX. + * In this case, PEX unit will be initialized after Serdes power-up + */ + + DEBUG_INIT_FULL_S("\n### hws_power_up_serdes_lanes ###\n"); + + /* COMMON PHYS SELECTORS register configuration */ + DEBUG_INIT_FULL_S + ("hws_power_up_serdes_lanes: Updating COMMON PHYS SELECTORS reg\n"); + CHECK_STATUS(hws_update_serdes_phy_selectors(serdes_configuration_map)); + + /* per Serdes Power Up */ + for (serdes_id = 0; serdes_id < hws_serdes_get_max_lane(); + serdes_id++) { + DEBUG_INIT_FULL_S + ("calling serdes_power_up_ctrl: serdes lane number "); + DEBUG_INIT_FULL_D_10(serdes_lane_num, 1); + DEBUG_INIT_FULL_S("\n"); + + serdes_lane_num = hws_get_physical_serdes_num(serdes_id); + serdes_type = serdes_config_map[serdes_id].serdes_type; + serdes_speed = serdes_config_map[serdes_id].serdes_speed; + serdes_mode = serdes_config_map[serdes_id].serdes_mode; + serdes_rx_polarity_swap = serdes_config_map[serdes_id].swap_rx; + serdes_tx_polarity_swap = serdes_config_map[serdes_id].swap_tx; + + /* serdes lane is not in use */ + if (serdes_type == DEFAULT_SERDES) + continue; + else if (serdes_type <= PEX3) /* PEX type */ + is_pex_enabled = 1; + + ref_clock = hws_serdes_get_ref_clock_val(serdes_type); + if (ref_clock == REF_CLOCK_UNSUPPORTED) { + DEBUG_INIT_S + ("hws_power_up_serdes_lanes: unsupported ref clock\n"); + return MV_NOT_SUPPORTED; + } + CHECK_STATUS(serdes_power_up_ctrl(serdes_lane_num, + 1, + serdes_type, + serdes_speed, + serdes_mode, ref_clock)); + + /* RX Polarity config */ + if (serdes_rx_polarity_swap) + CHECK_STATUS(serdes_polarity_config + (serdes_lane_num, 1)); + + /* TX Polarity config */ + if (serdes_tx_polarity_swap) + CHECK_STATUS(serdes_polarity_config + (serdes_lane_num, 0)); + } + + if (is_pex_enabled) { + /* Set PEX_TX_CONFIG_SEQ sequence for PEXx4 mode. + After finish the Power_up sequence for all lanes, + the lanes should be released from reset state. */ + CHECK_STATUS(hws_pex_tx_config_seq(serdes_config_map)); + + /* PEX configuration */ + CHECK_STATUS(hws_pex_config(serdes_config_map)); + } + + /* USB2 configuration */ + DEBUG_INIT_FULL_S("hws_power_up_serdes_lanes: init USB2 Phys\n"); + CHECK_STATUS(mv_seq_exec(0 /* not relevant */ , USB2_POWER_UP_SEQ)); + + DEBUG_INIT_FULL_S + ("### hws_power_up_serdes_lanes ended successfully ###\n"); + + return MV_OK; +} + +int ctrl_high_speed_serdes_phy_config(void) +{ + return hws_ctrl_high_speed_serdes_phy_config(); +} + +static int serdes_pex_usb3_pipe_delay_w_a(u32 serdes_num, u8 serdes_type) +{ + u32 reg_data; + + /* WA for A380 Z1 relevant for lanes 3,4,5 only */ + if (serdes_num >= 3) { + reg_data = reg_read(GENERAL_PURPOSE_RESERVED0_REG); + /* set delay on pipe - + * When lane 3 is connected to a MAC of Pex -> set bit 7 to 1. + * When lane 3 is connected to a MAC of USB3 -> set bit 7 to 0. + * When lane 4 is connected to a MAC of Pex -> set bit 8 to 1. + * When lane 4 is connected to a MAC of USB3 -> set bit 8 to 0. + * When lane 5 is connected to a MAC of Pex -> set bit 8 to 1. + * When lane 5 is connected to a MAC of USB3 -> set bit 8 to 0. + */ + if (serdes_type == PEX) + reg_data |= 1 << (7 + (serdes_num - 3)); + if (serdes_type == USB3) { + /* USB3 */ + reg_data &= ~(1 << (7 + (serdes_num - 3))); + } + reg_write(GENERAL_PURPOSE_RESERVED0_REG, reg_data); + } + + return MV_OK; +} + +/* + * hws_serdes_pex_ref_clock_satr_get - + * + * DESCRIPTION: Get the reference clock value from DEVICE_SAMPLE_AT_RESET1_REG + * and check: + * bit[2] for PEX#0, bit[3] for PEX#1, bit[30] for PEX#2, bit[31] + * for PEX#3. + * If bit=0 --> REF_CLOCK_100MHz + * If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=0 + * --> REF_CLOCK_25MHz + * If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=1 + * --> REF_CLOCK_40MHz + * + * INPUT: serdes_type - Type of Serdes + * + * OUTPUT: pex_satr - Return the REF_CLOCK value: + * REF_CLOCK_25MHz, REF_CLOCK_40MHz or REF_CLOCK_100MHz + * + * RETURNS: MV_OK - for success + * MV_BAD_PARAM - for fail + */ +int hws_serdes_pex_ref_clock_satr_get(enum serdes_type serdes_type, u32 *pex_satr) +{ + u32 data, reg_satr1; + + reg_satr1 = reg_read(DEVICE_SAMPLE_AT_RESET1_REG); + + switch (serdes_type) { + case PEX0: + data = REF_CLK_SELECTOR_VAL_PEX0(reg_satr1); + break; + case PEX1: + data = REF_CLK_SELECTOR_VAL_PEX1(reg_satr1); + break; + case PEX2: + data = REF_CLK_SELECTOR_VAL_PEX2(reg_satr1); + break; + case PEX3: + data = REF_CLK_SELECTOR_VAL_PEX3(reg_satr1); + break; + default: + printf("%s: Error: SerDes type %d is not supported\n", + __func__, serdes_type); + return MV_BAD_PARAM; + } + + *pex_satr = data; + + return MV_OK; +} + +u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type) +{ + u32 pex_satr; + enum ref_clock ref_clock; + + DEBUG_INIT_FULL_S("\n### hws_serdes_get_ref_clock_val ###\n"); + + if (serdes_type >= LAST_SERDES_TYPE) + return REF_CLOCK_UNSUPPORTED; + + /* read ref clock from S@R */ + ref_clock = hws_serdes_silicon_ref_clock_get(); + + if (serdes_type > PEX3) { + /* for all Serdes types but PCIe */ + return ref_clock; + } + + /* for PCIe, need also to check PCIe S@R */ + CHECK_STATUS(hws_serdes_pex_ref_clock_satr_get + (serdes_type, &pex_satr)); + + if (pex_satr == 0) { + return REF_CLOCK_100MHZ; + } else if (pex_satr == 1) { + /* value of 1 means we can use ref clock from SoC (as other Serdes types) */ + return ref_clock; + } else { + printf + ("%s: Error: REF_CLK_SELECTOR_VAL for SerDes type %d is wrong\n", + __func__, serdes_type); + return REF_CLOCK_UNSUPPORTED; + } +} + +int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, enum ref_clock ref_clock) +{ + u32 sata_idx, pex_idx, sata_port; + enum serdes_seq speed_seq_id; + u32 reg_data; + int is_pex_by1; + + DEBUG_INIT_FULL_S("\n### serdes_power_up_ctrl ###\n"); + + if (serdes_power_up == 1) { /* Serdes power up */ + DEBUG_INIT_FULL_S + ("serdes_power_up_ctrl: executing power up.. "); + DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 2); + DEBUG_INIT_FULL_C("serdes type = ", serdes_type, 2); + + DEBUG_INIT_FULL_S("Going access 1"); + + /* Getting the Speed Select sequence id */ + speed_seq_id = + serdes_type_and_speed_to_speed_seq(serdes_type, + baud_rate); + if (speed_seq_id == SERDES_LAST_SEQ) { + printf + ("serdes_power_up_ctrl: serdes type %d and speed %d are not supported together\n", + serdes_type, baud_rate); + + return MV_BAD_PARAM; + } + + /* Executing power up, ref clock set, speed config and TX config */ + switch (serdes_type) { + case PEX0: + case PEX1: + case PEX2: + case PEX3: + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) { + CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a + (serdes_num, PEX)); + } + + is_pex_by1 = (serdes_mode == PEX_ROOT_COMPLEX_X1) || + (serdes_mode == PEX_END_POINT_X1); + pex_idx = serdes_type - PEX0; + + if ((is_pex_by1 == 1) || (serdes_type == PEX0)) { + /* For PEX by 4, init only the PEX 0 */ + reg_data = reg_read(SOC_CONTROL_REG1); + if (is_pex_by1 == 1) + reg_data |= 0x4000; + else + reg_data &= ~0x4000; + reg_write(SOC_CONTROL_REG1, reg_data); + + reg_data = + reg_read(((PEX_IF_REGS_BASE(pex_idx)) + + 0x6c)); + reg_data &= ~0x3f0; + if (is_pex_by1 == 1) + reg_data |= 0x10; + else + reg_data |= 0x40; + reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c), + reg_data); + + reg_data = + reg_read(((PEX_IF_REGS_BASE(pex_idx)) + + 0x6c)); + reg_data &= ~0xf; + reg_data |= 0x2; + reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c), + reg_data); + + reg_data = + reg_read(((PEX_IF_REGS_BASE(pex_idx)) + + 0x70)); + reg_data &= ~0x40; + reg_data |= 0x40; + reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x70), + reg_data); + } + + CHECK_STATUS(mv_seq_exec(serdes_num, PEX_POWER_UP_SEQ)); + if (is_pex_by1 == 0) { + /* + * for PEX by 4 - use the PEX index as the + * seq array index + */ + serdes_seq_db[PEX_BY_4_CONFIG_SEQ]. + data_arr_idx = pex_idx; + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_BY_4_CONFIG_SEQ)); + } + + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_ELECTRICAL_CONFIG_SEQ)); + + if (is_pex_by1 == 1) { + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_TX_CONFIG_SEQ2)); + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_TX_CONFIG_SEQ3)); + CHECK_STATUS(mv_seq_exec + (serdes_num, PEX_TX_CONFIG_SEQ1)); + } + udelay(20); + + break; + case USB3_HOST0: + case USB3_HOST1: + case USB3_DEVICE: + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) { + CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a + (serdes_num, USB3)); + } + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + if (serdes_type == USB3_DEVICE) { + CHECK_STATUS(mv_seq_exec + (serdes_num, + USB3_DEVICE_CONFIG_SEQ)); + } + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_TX_CONFIG_SEQ2)); + CHECK_STATUS(mv_seq_exec + (serdes_num, USB3_TX_CONFIG_SEQ3)); + + udelay(10000); + break; + case SATA0: + case SATA1: + case SATA2: + case SATA3: + sata_idx = ((serdes_type == SATA0) || + (serdes_type == SATA1)) ? 0 : 1; + sata_port = ((serdes_type == SATA0) || + (serdes_type == SATA2)) ? 0 : 1; + + CHECK_STATUS(mv_seq_exec + (sata_idx, (sata_port == 0) ? + SATA_PORT_0_ONLY_POWER_UP_SEQ : + SATA_PORT_1_ONLY_POWER_UP_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (sata_idx, (sata_port == 0) ? + SATA_PORT_0_ONLY_TX_CONFIG_SEQ : + SATA_PORT_1_ONLY_TX_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SATA_TX_CONFIG_SEQ2)); + + udelay(10000); + break; + case SGMII0: + case SGMII1: + case SGMII2: + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (serdes_num, SGMII_TX_CONFIG_SEQ2)); + + /* GBE configuration */ + reg_data = reg_read(GBE_CONFIGURATION_REG); + /* write the SGMII index */ + reg_data |= 0x1 << (serdes_type - SGMII0); + reg_write(GBE_CONFIGURATION_REG, reg_data); + + break; + case QSGMII: + if (hws_ctrl_serdes_rev_get() < MV_SERDES_REV_2_1) + return MV_NOT_SUPPORTED; + + CHECK_STATUS(mv_seq_exec + (serdes_num, QSGMII_POWER_UP_SEQ)); + CHECK_STATUS(hws_ref_clock_set + (serdes_num, serdes_type, ref_clock)); + CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id)); + CHECK_STATUS(mv_seq_exec + (serdes_num, + QSGMII_ELECTRICAL_CONFIG_SEQ)); + CHECK_STATUS(mv_seq_exec + (serdes_num, QSGMII_TX_CONFIG_SEQ1)); + CHECK_STATUS(mv_seq_exec + (serdes_num, QSGMII_TX_CONFIG_SEQ2)); + break; + case SGMII3: + case XAUI: + case RXAUI: + CHECK_STATUS(serdes_power_up_ctrl_ext + (serdes_num, serdes_power_up, serdes_type, + baud_rate, serdes_mode, ref_clock)); + break; + default: + DEBUG_INIT_S + ("serdes_power_up_ctrl: bad serdes_type parameter\n"); + return MV_BAD_PARAM; + } + } else { /* Serdes power down */ + DEBUG_INIT_FULL_S("serdes_power_up: executing power down.. "); + DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 1); + + CHECK_STATUS(mv_seq_exec(serdes_num, SERDES_POWER_DOWN_SEQ)); + } + + DEBUG_INIT_FULL_C( + "serdes_power_up_ctrl ended successfully for serdes ", + serdes_num, 2); + + return MV_OK; +} + +int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map) +{ + u32 lane_data, idx, serdes_lane_hw_num, reg_data = 0; + enum serdes_type serdes_type; + enum serdes_mode serdes_mode; + u8 select_bit_off; + int is_pex_x4 = 0; + int updated_topology_print = 0; + + DEBUG_INIT_FULL_S("\n### hws_update_serdes_phy_selectors ###\n"); + DEBUG_INIT_FULL_S + ("Updating the COMMON PHYS SELECTORS register with the serdes types\n"); + + if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) + select_bit_off = 3; + else + select_bit_off = 4; + + /* + * Updating bits 0-17 in the COMMON PHYS SELECTORS register + * according to the serdes types + */ + for (idx = 0; idx < hws_serdes_get_max_lane(); + idx++) { + serdes_type = serdes_config_map[idx].serdes_type; + serdes_mode = serdes_config_map[idx].serdes_mode; + serdes_lane_hw_num = hws_get_physical_serdes_num(idx); + + lane_data = + hws_serdes_get_phy_selector_val(serdes_lane_hw_num, + serdes_type); + + if (serdes_type == DEFAULT_SERDES) + continue; + + if (hws_serdes_topology_verify + (serdes_type, idx, serdes_mode) != MV_OK) { + serdes_config_map[idx].serdes_type = + DEFAULT_SERDES; + printf("%s: SerDes lane #%d is disabled\n", __func__, + serdes_lane_hw_num); + updated_topology_print = 1; + continue; + } + + /* + * Checking if the board topology configuration includes + * PEXx4 - for the next step + */ + if ((serdes_mode == PEX_END_POINT_X4) || + (serdes_mode == PEX_ROOT_COMPLEX_X4)) { + /* update lane data to the 3 next SERDES lanes */ + lane_data = + common_phys_selectors_pex_by4_lanes + [serdes_lane_hw_num]; + if (serdes_type == PEX0) + is_pex_x4 = 1; + } + + if (lane_data == NA) { + printf + ("%s: Warning: SerDes lane #%d and type %d are not supported together\n", + __func__, serdes_lane_hw_num, serdes_mode); + serdes_config_map[idx].serdes_type = + DEFAULT_SERDES; + printf("%s: SerDes lane #%d is disabled\n", __func__, + serdes_lane_hw_num); + continue; + } + + /* + * Updating the data that will be written to + * COMMON_PHYS_SELECTORS_REG + */ + reg_data |= (lane_data << + (select_bit_off * serdes_lane_hw_num)); + } + + /* + * Check that number of used lanes for XAUI and RXAUI + * (if used) is right + */ + hws_serdes_xaui_topology_verify(); + + /* Print topology */ + if (updated_topology_print) + print_topology_details(serdes_config_map); + + /* + * Updating the PEXx4 Enable bit in the COMMON PHYS SELECTORS + * register for PEXx4 mode + */ + reg_data |= (is_pex_x4 == 1) ? (0x1 << PEX_X4_ENABLE_OFFS) : 0; + + /* Updating the COMMON PHYS SELECTORS register */ + reg_write(COMMON_PHYS_SELECTORS_REG, reg_data); + + return MV_OK; +} + +int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type, + enum ref_clock ref_clock) +{ + u32 data1 = 0, data2 = 0, data3 = 0, reg_data; + + DEBUG_INIT_FULL_S("\n### hws_ref_clock_set ###\n"); + + if (hws_is_serdes_active(serdes_num) != 1) { + printf("%s: SerDes lane #%d is not Active\n", __func__, + serdes_num); + return MV_BAD_PARAM; + } + + switch (serdes_type) { + case PEX0: + case PEX1: + case PEX2: + case PEX3: + switch (ref_clock) { + case REF_CLOCK_25MHZ: + CHECK_STATUS(mv_seq_exec + (serdes_num, + PEX_CONFIG_REF_CLOCK_25MHZ_SEQ)); + return MV_OK; + case REF_CLOCK_100MHZ: + CHECK_STATUS(mv_seq_exec + (serdes_num, + PEX_CONFIG_REF_CLOCK_100MHZ_SEQ)); + return MV_OK; +#ifdef CONFIG_ARMADA_39X + case REF_CLOCK_40MHZ: + CHECK_STATUS(mv_seq_exec + (serdes_num, + PEX_CONFIG_REF_CLOCK_40MHZ_SEQ)); + return MV_OK; +#endif + default: + printf + ("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n", + __func__, ref_clock, serdes_num, serdes_type); + return MV_BAD_PARAM; + } + case USB3_HOST0: + case USB3_HOST1: + case USB3_DEVICE: + if (ref_clock == REF_CLOCK_25MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2; + data2 = GLOBAL_PM_CTRL_REG_25MHZ_VAL; + data3 = LANE_CFG4_REG_25MHZ_VAL; + } else if (ref_clock == REF_CLOCK_40MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; + data2 = GLOBAL_PM_CTRL_REG_40MHZ_VAL; + data3 = LANE_CFG4_REG_40MHZ_VAL; + } else { + printf + ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", + serdes_type); + return MV_BAD_PARAM; + } + break; + case SATA0: + case SATA1: + case SATA2: + case SATA3: + case SGMII0: + case SGMII1: + case SGMII2: + case QSGMII: + if (ref_clock == REF_CLOCK_25MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1; + } else if (ref_clock == REF_CLOCK_40MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; + } else { + printf + ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", + serdes_type); + return MV_BAD_PARAM; + } + break; +#ifdef CONFIG_ARMADA_39X + case SGMII3: + case XAUI: + case RXAUI: + if (ref_clock == REF_CLOCK_25MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1; + } else if (ref_clock == REF_CLOCK_40MHZ) { + data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; + } else { + printf + ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", + serdes_type); + return MV_BAD_PARAM; + } + break; +#endif + default: + DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n"); + return MV_BAD_PARAM; + } + + /* + * Write the ref_clock to relevant SELECT_REF_CLOCK_REG bits and + * offset + */ + reg_data = reg_read(POWER_AND_PLL_CTRL_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num)); + reg_data &= POWER_AND_PLL_CTRL_REG_MASK; + reg_data |= data1; + reg_write(POWER_AND_PLL_CTRL_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data); + + if ((serdes_type == USB3_HOST0) || (serdes_type == USB3_HOST1) || + (serdes_type == USB3_DEVICE)) { + reg_data = reg_read(GLOBAL_PM_CTRL + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num)); + reg_data &= GLOBAL_PM_CTRL_REG_MASK; + reg_data |= data2; + reg_write(GLOBAL_PM_CTRL + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data); + + reg_data = reg_read(LANE_CFG4_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num)); + reg_data &= LANE_CFG4_REG_MASK; + reg_data |= data3; + reg_write(LANE_CFG4_REG + + SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data); + } + + return MV_OK; +} + +/* + * hws_pex_tx_config_seq - + * + * DESCRIPTION: Set PEX_TX_CONFIG_SEQ sequence init for PEXx4 mode + * INPUT: serdes_map - The board topology map + * OUTPUT: None + * RETURNS: MV_OK - for success + * MV_BAD_PARAM - for fail + */ +int hws_pex_tx_config_seq(struct serdes_map *serdes_map) +{ + enum serdes_mode serdes_mode; + u32 serdes_lane_id, serdes_lane_hw_num; + + DEBUG_INIT_FULL_S("\n### hws_pex_tx_config_seq ###\n"); + + /* + * For PEXx4: the pex_and_usb3_tx_config_params1/2/3 + * configurations should run by setting each sequence for + * all 4 lanes. + */ + + /* relese pipe soft reset for all lanes */ + for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane(); + serdes_lane_id++) { + serdes_mode = serdes_map[serdes_lane_id].serdes_mode; + serdes_lane_hw_num = + hws_get_physical_serdes_num(serdes_lane_id); + + if ((serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_mode == PEX_END_POINT_X4)) { + CHECK_STATUS(mv_seq_exec + (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ1)); + } + } + + /* set phy soft reset for all lanes */ + for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane(); + serdes_lane_id++) { + serdes_mode = serdes_map[serdes_lane_id].serdes_mode; + serdes_lane_hw_num = + hws_get_physical_serdes_num(serdes_lane_id); + if ((serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_mode == PEX_END_POINT_X4)) { + CHECK_STATUS(mv_seq_exec + (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ2)); + } + } + + /* set phy soft reset for all lanes */ + for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane(); + serdes_lane_id++) { + serdes_mode = serdes_map[serdes_lane_id].serdes_mode; + serdes_lane_hw_num = + hws_get_physical_serdes_num(serdes_lane_id); + if ((serdes_mode == PEX_ROOT_COMPLEX_X4) || + (serdes_mode == PEX_END_POINT_X4)) { + CHECK_STATUS(mv_seq_exec + (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ3)); + } + } + + return MV_OK; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h new file mode 100644 index 0000000..2508721 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h @@ -0,0 +1,251 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _HIGH_SPEED_ENV_SPEC_H +#define _HIGH_SPEED_ENV_SPEC_H + +#include "seq_exec.h" + +/* + * For setting or clearing a certain bit (bit is a number between 0 and 31) + * in the data + */ +#define SET_BIT(data, bit) ((data) | (0x1 << (bit))) +#define CLEAR_BIT(data, bit) ((data) & (~(0x1 << (bit)))) + +#define MAX_SERDES_LANES 7 /* as in a39x */ + +/* Serdes revision */ +/* Serdes revision 1.2 (for A38x-Z1) */ +#define MV_SERDES_REV_1_2 0x0 +/* Serdes revision 2.1 (for A39x-Z1, A38x-A0) */ +#define MV_SERDES_REV_2_1 0x1 +#define MV_SERDES_REV_NA 0xff + +#define SERDES_REGS_LANE_BASE_OFFSET(lane) (0x800 * (lane)) + +#define PEX_X4_ENABLE_OFFS \ + (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2 ? 18 : 31) + +/* Serdes lane types */ +enum serdes_type { + PEX0, + PEX1, + PEX2, + PEX3, + SATA0, + SATA1, + SATA2, + SATA3, + SGMII0, + SGMII1, + SGMII2, + QSGMII, + USB3_HOST0, + USB3_HOST1, + USB3_DEVICE, + SGMII3, + XAUI, + RXAUI, + DEFAULT_SERDES, + LAST_SERDES_TYPE +}; + +/* Serdes baud rates */ +enum serdes_speed { + SERDES_SPEED_1_25_GBPS, + SERDES_SPEED_1_5_GBPS, + SERDES_SPEED_2_5_GBPS, + SERDES_SPEED_3_GBPS, + SERDES_SPEED_3_125_GBPS, + SERDES_SPEED_5_GBPS, + SERDES_SPEED_6_GBPS, + SERDES_SPEED_6_25_GBPS, + LAST_SERDES_SPEED +}; + +/* Serdes modes */ +enum serdes_mode { + PEX_ROOT_COMPLEX_X1, + PEX_ROOT_COMPLEX_X4, + PEX_END_POINT_X1, + PEX_END_POINT_X4, + + SERDES_DEFAULT_MODE, /* not pex */ + + SERDES_LAST_MODE +}; + +struct serdes_map { + enum serdes_type serdes_type; + enum serdes_speed serdes_speed; + enum serdes_mode serdes_mode; + int swap_rx; + int swap_tx; +}; + +/* Serdes ref clock options */ +enum ref_clock { + REF_CLOCK_25MHZ, + REF_CLOCK_100MHZ, + REF_CLOCK_40MHZ, + REF_CLOCK_UNSUPPORTED +}; + +/* Serdes sequences */ +enum serdes_seq { + SATA_PORT_0_ONLY_POWER_UP_SEQ, + SATA_PORT_1_ONLY_POWER_UP_SEQ, + SATA_POWER_UP_SEQ, + SATA_1_5_SPEED_CONFIG_SEQ, + SATA_3_SPEED_CONFIG_SEQ, + SATA_6_SPEED_CONFIG_SEQ, + SATA_ELECTRICAL_CONFIG_SEQ, + SATA_TX_CONFIG_SEQ1, + SATA_PORT_0_ONLY_TX_CONFIG_SEQ, + SATA_PORT_1_ONLY_TX_CONFIG_SEQ, + SATA_TX_CONFIG_SEQ2, + + SGMII_POWER_UP_SEQ, + SGMII_1_25_SPEED_CONFIG_SEQ, + SGMII_3_125_SPEED_CONFIG_SEQ, + SGMII_ELECTRICAL_CONFIG_SEQ, + SGMII_TX_CONFIG_SEQ1, + SGMII_TX_CONFIG_SEQ2, + + PEX_POWER_UP_SEQ, + PEX_2_5_SPEED_CONFIG_SEQ, + PEX_5_SPEED_CONFIG_SEQ, + PEX_ELECTRICAL_CONFIG_SEQ, + PEX_TX_CONFIG_SEQ1, + PEX_TX_CONFIG_SEQ2, + PEX_TX_CONFIG_SEQ3, + PEX_BY_4_CONFIG_SEQ, + PEX_CONFIG_REF_CLOCK_25MHZ_SEQ, + PEX_CONFIG_REF_CLOCK_100MHZ_SEQ, + PEX_CONFIG_REF_CLOCK_40MHZ_SEQ, + + USB3_POWER_UP_SEQ, + USB3_HOST_SPEED_CONFIG_SEQ, + USB3_DEVICE_SPEED_CONFIG_SEQ, + USB3_ELECTRICAL_CONFIG_SEQ, + USB3_TX_CONFIG_SEQ1, + USB3_TX_CONFIG_SEQ2, + USB3_TX_CONFIG_SEQ3, + USB3_DEVICE_CONFIG_SEQ, + + USB2_POWER_UP_SEQ, + + SERDES_POWER_DOWN_SEQ, + + SGMII3_POWER_UP_SEQ, + SGMII3_1_25_SPEED_CONFIG_SEQ, + SGMII3_TX_CONFIG_SEQ1, + SGMII3_TX_CONFIG_SEQ2, + + QSGMII_POWER_UP_SEQ, + QSGMII_5_SPEED_CONFIG_SEQ, + QSGMII_ELECTRICAL_CONFIG_SEQ, + QSGMII_TX_CONFIG_SEQ1, + QSGMII_TX_CONFIG_SEQ2, + + XAUI_POWER_UP_SEQ, + XAUI_3_125_SPEED_CONFIG_SEQ, + XAUI_ELECTRICAL_CONFIG_SEQ, + XAUI_TX_CONFIG_SEQ1, + XAUI_TX_CONFIG_SEQ2, + + RXAUI_POWER_UP_SEQ, + RXAUI_6_25_SPEED_CONFIG_SEQ, + RXAUI_ELECTRICAL_CONFIG_SEQ, + RXAUI_TX_CONFIG_SEQ1, + RXAUI_TX_CONFIG_SEQ2, + + SERDES_LAST_SEQ +}; + +/* The different sequence types for PEX and USB3 */ +enum { + PEX, + USB3, + LAST_PEX_USB_SEQ_TYPE +}; + +enum { + PEXSERDES_SPEED_2_5_GBPS, + PEXSERDES_SPEED_5_GBPS, + USB3SERDES_SPEED_5_GBPS_HOST, + USB3SERDES_SPEED_5_GBPS_DEVICE, + LAST_PEX_USB_SPEED_SEQ_TYPE +}; + +/* The different sequence types for SATA and SGMII */ +enum { + SATA, + SGMII, + SGMII_3_125, + LAST_SATA_SGMII_SEQ_TYPE +}; + +enum { + QSGMII_SEQ_IDX, + LAST_QSGMII_SEQ_TYPE +}; + +enum { + XAUI_SEQ_IDX, + RXAUI_SEQ_IDX, + LAST_XAUI_RXAUI_SEQ_TYPE +}; + +enum { + SATASERDES_SPEED_1_5_GBPS, + SATASERDES_SPEED_3_GBPS, + SATASERDES_SPEED_6_GBPS, + SGMIISERDES_SPEED_1_25_GBPS, + SGMIISERDES_SPEED_3_125_GBPS, + LAST_SATA_SGMII_SPEED_SEQ_TYPE +}; + +extern u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES]; +extern u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES]; + +u8 hws_ctrl_serdes_rev_get(void); +int mv_update_serdes_select_phy_mode_seq(void); +int hws_board_topology_load(struct serdes_map *serdes_map_array); +enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type, + enum serdes_speed baud_rate); +int hws_serdes_seq_init(void); +int hws_serdes_seq_db_init(void); +int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map); +int hws_ctrl_high_speed_serdes_phy_config(void); +int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, + enum ref_clock ref_clock); +int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up, + enum serdes_type serdes_type, + enum serdes_speed baud_rate, + enum serdes_mode serdes_mode, + enum ref_clock ref_clock); +u32 hws_serdes_silicon_ref_clock_get(void); +int hws_serdes_pex_ref_clock_get(enum serdes_type serdes_type, + enum ref_clock *ref_clock); +int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type, + enum ref_clock ref_clock); +int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map); +u32 hws_serdes_get_phy_selector_val(int serdes_num, + enum serdes_type serdes_type); +u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type); +u32 hws_serdes_get_max_lane(void); +int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset, + u32 *unit_base_reg, u32 *unit_offset); +int hws_pex_tx_config_seq(struct serdes_map *serdes_map); +u32 hws_get_physical_serdes_num(u32 serdes_num); +int hws_is_serdes_active(u8 lane_num); + +#endif /* _HIGH_SPEED_ENV_SPEC_H */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c new file mode 100644 index 0000000..5f2c3eb --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c @@ -0,0 +1,1009 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_topology_spec.h" +#include "sys_env_lib.h" + +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT +/* + * This is an example implementation for this custom board + * specific function + */ +static struct serdes_map custom_board_topology_config[] = { + /* Customer Board Topology - reference from Marvell DB-GP board */ + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +int hws_board_topology_load(struct serdes_map *serdes_map_array) +{ + serdes_map_array = custom_board_topology_config; +} +#endif + +load_topology_func_ptr load_topology_func_arr[] = { + load_topology_rd, /* RD NAS */ + load_topology_db, /* 6820 DB-BP (A38x) */ + load_topology_rd, /* RD AP */ + load_topology_db_ap, /* DB AP */ + load_topology_db_gp, /* DB GP */ + load_topology_db_381, /* 6821 DB-BP (A381) */ + load_topology_db_amc, /* DB-AMC */ +}; + +/*****************************************/ +/** Load topology - Marvell 380 DB - BP **/ +/*****************************************/ +/* Configuration options */ +struct serdes_map db_config_default[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1363_c[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, +}; + +struct serdes_map db_config_slm1363_d[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1363_e[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1363_f[MAX_SERDES_LANES] = { + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1364_d[MAX_SERDES_LANES] = { + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1364_e[MAX_SERDES_LANES] = { + {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0} +}; + +struct serdes_map db_config_slm1364_f[MAX_SERDES_LANES] = { + {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0}, + {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0} +}; + +/*************************************************************************/ +/** The following structs are mapping for DB board 'SatR' configuration **/ +/*************************************************************************/ +struct serdes_map db_satr_config_lane1[SATR_DB_LANE1_MAX_OPTIONS] = { + /* 0 */ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, + 0}, + /* 1 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 2 */ {SATA0, SERDES_SPEED_3_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 3 */ {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 4 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 5 */ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 6 */ {QSGMII, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_satr_config_lane2[SATR_DB_LANE2_MAX_OPTIONS] = { + /* 0 */ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, + 0}, + /* 1 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 2 */ {SATA1, SERDES_SPEED_3_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 3 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0} +}; + +/*******************************************************/ +/* Configuration options DB ****************************/ +/* mapping from TWSI address data to configuration map */ +/*******************************************************/ +struct serdes_map *topology_config_db[] = { + db_config_slm1363_c, + db_config_slm1363_d, + db_config_slm1363_e, + db_config_slm1363_f, + db_config_slm1364_d, + db_config_slm1364_e, + db_config_slm1364_f, + db_config_default +}; + +/*************************************/ +/** Load topology - Marvell DB - AP **/ +/*************************************/ +struct serdes_map db_ap_config_default[MAX_SERDES_LANES] = { + /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 1 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 2 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 3 */ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 4 */ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 5 */ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0} +}; + +/*************************************/ +/** Load topology - Marvell DB - GP **/ +/*************************************/ +struct serdes_map db_gp_config_default[MAX_SERDES_LANES] = { + /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + /* 1 */ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 2 */ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 3 */ {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 4 */ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}, + /* 5 */ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, + 0} +}; + +struct serdes_map db_amc_config_default[MAX_SERDES_LANES] = { + /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 1 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 2 */ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 3 */ {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0}, + /* 4 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, + /* 5 */ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, + 0}, +}; + +/*****************************************/ +/** Load topology - Marvell 381 DB - BP **/ +/*****************************************/ +/* Configuration options */ +struct serdes_map db381_config_default[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0} +}; + +struct serdes_map db_config_slm1427[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 1, 1}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 1, 1} +}; + +struct serdes_map db_config_slm1426[MAX_SERDES_LANES] = { + {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1}, + {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 1, 1} +}; + +/* + * this array must be aligned with enum topology_config_db381 enum, + * every update to this array requires update to enum topology_config_db381 + * enum + */ +struct serdes_map *topology_config_db_381[] = { + db_config_slm1427, + db_config_slm1426, + db381_config_default, +}; + +u8 topology_config_db_mode_get(void) +{ + u8 mode; + + DEBUG_INIT_FULL_S("\n### topology_config_db_mode_get ###\n"); + + /* Default - return DB_CONFIG_DEFAULT */ + + if (!i2c_read(DB_GET_MODE_SLM1363_ADDR, 0, 1, &mode, 1)) { + switch (mode & 0xf) { + case 0xc: + DEBUG_INIT_S("\nInit DB board SLM 1363 C topology\n"); + return DB_CONFIG_SLM1363_C; + case 0xd: + DEBUG_INIT_S("\nInit DB board SLM 1363 D topology\n"); + return DB_CONFIG_SLM1363_D; + case 0xe: + DEBUG_INIT_S("\nInit DB board SLM 1363 E topology\n"); + return DB_CONFIG_SLM1363_E; + case 0xf: + DEBUG_INIT_S("\nInit DB board SLM 1363 F topology\n"); + return DB_CONFIG_SLM1363_F; + default: /* not the right module */ + break; + } + } + + /* SLM1364 Module */ + if (i2c_read(DB_GET_MODE_SLM1364_ADDR, 0, 1, &mode, 1)) { + DEBUG_INIT_S("\nInit DB board default topology\n"); + return DB_CONFIG_DEFAULT; + } + + switch (mode & 0xf) { + case 0xd: + DEBUG_INIT_S("\nInit DB board SLM 1364 D topology\n"); + return DB_CONFIG_SLM1364_D; + case 0xe: + DEBUG_INIT_S("\nInit DB board SLM 1364 E topology\n"); + return DB_CONFIG_SLM1364_E; + case 0xf: + DEBUG_INIT_S("\nInit DB board SLM 1364 F topology\n"); + return DB_CONFIG_SLM1364_F; + default: /* Default configuration */ + DEBUG_INIT_S("\nInit DB board default topology\n"); + return DB_CONFIG_DEFAULT; + } +} + +u8 topology_config_db_381_mode_get(void) +{ + u8 mode; + + DEBUG_INIT_FULL_S("\n### topology_config_db_381_mode_get ###\n"); + + if (!i2c_read(DB381_GET_MODE_SLM1426_1427_ADDR, 0, 2, &mode, 1)) { + switch (mode & 0xf) { + case 0x1: + DEBUG_INIT_S("\nInit DB-381 board SLM 1427 topology\n"); + return DB_CONFIG_SLM1427; + case 0x2: + DEBUG_INIT_S("\nInit DB-381 board SLM 1426 topology\n"); + return DB_CONFIG_SLM1426; + default: /* not the right module */ + break; + } + } + + /* in case not detected any supported module, use default topology */ + DEBUG_INIT_S("\nInit DB-381 board default topology\n"); + return DB_381_CONFIG_DEFAULT; +} + +/* + * Read SatR field 'sgmiispeed' and update lane topology SGMII entries + * speed setup + */ +int update_topology_sgmii_speed(struct serdes_map *serdes_map_array) +{ + u32 serdes_type, lane_num; + u8 config_val; + + /* Update SGMII speed settings by 'sgmiispeed' SatR value */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_type = serdes_map_array[lane_num].serdes_type; + /*Read SatR configuration for SGMII speed */ + if ((serdes_type == SGMII0) || (serdes_type == SGMII1) || + (serdes_type == SGMII2)) { + /* Read SatR 'sgmiispeed' value */ + if (i2c_read(EEPROM_I2C_ADDR, 0, 2, &config_val, 1)) { + printf("%s: TWSI Read of 'sgmiispeed' failed\n", + __func__); + return MV_FAIL; + } + + if (0 == (config_val & 0x40)) { + serdes_map_array[lane_num].serdes_speed = + SERDES_SPEED_1_25_GBPS; + } else { + serdes_map_array[lane_num].serdes_speed = + SERDES_SPEED_3_125_GBPS; + } + } + } + return MV_OK; +} + +struct serdes_map default_lane = { + DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE +}; +int is_custom_topology = 0; /* indicate user of non-default topology */ + +/* + * Read SatR fields (dbserdes1/2 , gpserdes1/2/5) and update lane + * topology accordingly + */ +int update_topology_satr(struct serdes_map *serdes_map_array) +{ + u8 config_val, lane_select, i; + u32 board_id = mv_board_id_get(); + + switch (board_id) { + case DB_68XX_ID: /* read 'dbserdes1' & 'dbserdes2' */ + case DB_BP_6821_ID: + if (i2c_read(EEPROM_I2C_ADDR, 1, 2, &config_val, 1)) { + printf("%s: TWSI Read of 'dbserdes1/2' failed\n", + __func__); + return MV_FAIL; + } + + /* Lane #1 */ + lane_select = (config_val & SATR_DB_LANE1_CFG_MASK) >> + SATR_DB_LANE1_CFG_OFFSET; + if (lane_select >= SATR_DB_LANE1_MAX_OPTIONS) { + printf("\n\%s: Error: invalid value for SatR field 'dbserdes1' (%x)\n", + __func__, lane_select); + printf("\t_skipping Topology update (run 'SatR write default')\n"); + return MV_FAIL; + } + + /* + * If modified default serdes_type for lane#1, update + * topology and mark it as custom + */ + if (serdes_map_array[1].serdes_type != + db_satr_config_lane1[lane_select].serdes_type) { + serdes_map_array[1] = db_satr_config_lane1[lane_select]; + is_custom_topology = 1; + /* DB 381/2 board has inverted SerDes polarity */ + if (board_id == DB_BP_6821_ID) + serdes_map_array[1].swap_rx = + serdes_map_array[1].swap_tx = 1; + } + + /* Lane #2 */ + lane_select = (config_val & SATR_DB_LANE2_CFG_MASK) >> + SATR_DB_LANE2_CFG_OFFSET; + if (lane_select >= SATR_DB_LANE2_MAX_OPTIONS) { + printf("\n\%s: Error: invalid value for SatR field 'dbserdes2' (%x)\n", + __func__, lane_select); + printf("\t_skipping Topology update (run 'SatR write default')\n"); + return MV_FAIL; + } + + /* + * If modified default serdes_type for lane@2, update + * topology and mark it as custom + */ + if (serdes_map_array[2].serdes_type != + db_satr_config_lane2[lane_select].serdes_type) { + serdes_map_array[2] = db_satr_config_lane2[lane_select]; + is_custom_topology = 1; + /* DB 381/2 board has inverted SerDes polarity */ + if (board_id == DB_BP_6821_ID) + serdes_map_array[2].swap_rx = + serdes_map_array[2].swap_tx = 1; + } + + if (is_custom_topology == 1) { + /* + * Check for conflicts with detected lane #1 and + * lane #2 (Disable conflicted lanes) + */ + for (i = 0; i < hws_serdes_get_max_lane(); i++) { + if (i != 1 && serdes_map_array[1].serdes_type == + serdes_map_array[i].serdes_type) { + printf("\t_lane #%d Type conflicts with Lane #1 (Lane #%d disabled)\n", + i, i); + serdes_map_array[i] = + db_satr_config_lane1[0]; + } + + if (i != 2 && + serdes_map_array[2].serdes_type == + serdes_map_array[i].serdes_type) { + printf("\t_lane #%d Type conflicts with Lane #2 (Lane #%d disabled)\n", + i, i); + serdes_map_array[i] = + db_satr_config_lane1[0]; + } + } + } + + break; /* case DB_68XX_ID */ + case DB_GP_68XX_ID: /* read 'gpserdes1' & 'gpserdes2' */ + if (i2c_read(EEPROM_I2C_ADDR, 2, 2, &config_val, 1)) { + printf("%s: TWSI Read of 'gpserdes1/2' failed\n", + __func__); + return MV_FAIL; + } + + /* + * Lane #1: + * lane_select = 0 --> SATA0, + * lane_select = 1 --> PCIe0 (mini PCIe) + */ + lane_select = (config_val & SATR_GP_LANE1_CFG_MASK) >> + SATR_GP_LANE1_CFG_OFFSET; + if (lane_select == 1) { + serdes_map_array[1].serdes_mode = PEX0; + serdes_map_array[1].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[1].serdes_type = PEX_ROOT_COMPLEX_X1; + /* + * If lane 1 is set to PCIe0 --> disable PCIe0 + * on lane 0 + */ + serdes_map_array[0] = default_lane; + /* indicate user of non-default topology */ + is_custom_topology = 1; + } + printf("Lane 1 detection: %s\n", + lane_select ? "PCIe0 (mini PCIe)" : "SATA0"); + + /* + * Lane #2: + * lane_select = 0 --> SATA1, + * lane_select = 1 --> PCIe1 (mini PCIe) + */ + lane_select = (config_val & SATR_GP_LANE2_CFG_MASK) >> + SATR_GP_LANE2_CFG_OFFSET; + if (lane_select == 1) { + serdes_map_array[2].serdes_type = PEX1; + serdes_map_array[2].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[2].serdes_mode = PEX_ROOT_COMPLEX_X1; + /* indicate user of non-default topology */ + is_custom_topology = 1; + } + printf("Lane 2 detection: %s\n", + lane_select ? "PCIe1 (mini PCIe)" : "SATA1"); + break; /* case DB_GP_68XX_ID */ + } + + if (is_custom_topology) + printf("\nDetected custom SerDes topology (to restore default run 'SatR write default')\n\n"); + + return MV_OK; +} + +/* + * hws_update_device_toplogy + * DESCRIPTION: Update the default board topology for specific device Id + * INPUT: + * topology_config_ptr - pointer to the Serdes mapping + * topology_mode - topology mode (index) + * OUTPUT: None + * RRETURNS: + * MV_OK - if updating the board topology success + * MV_BAD_PARAM - if the input parameter is wrong + */ +int hws_update_device_toplogy(struct serdes_map *topology_config_ptr, + enum topology_config_db topology_mode) +{ + u32 dev_id = sys_env_device_id_get(); + u32 board_id = mv_board_id_get(); + + switch (topology_mode) { + case DB_CONFIG_DEFAULT: + switch (dev_id) { + case MV_6810: + /* + * DB-AP : default for Lane3=SGMII2 --> + * 6810 supports only 2 SGMII interfaces: + * lane 3 disabled + */ + if (board_id == DB_AP_68XX_ID) { + printf("Device 6810 supports only 2 SGMII interfaces: SGMII-2 @ lane3 disabled\n"); + topology_config_ptr[3] = default_lane; + } + + /* + * 6810 has only 4 SerDes and the forth one is + * Serdes number 5 (i.e. Serdes 4 is not connected), + * therefore we need to copy SerDes 5 configuration + * to SerDes 4 + */ + printf("Device 6810 does not supports SerDes Lane #4: replaced topology entry with lane #5\n"); + topology_config_ptr[4] = topology_config_ptr[5]; + + /* + * No break between cases since the 1st + * 6820 limitation apply on 6810 + */ + case MV_6820: + /* + * DB-GP & DB-BP: default for Lane3=SATA3 --> + * 6810/20 supports only 2 SATA interfaces: + * lane 3 disabled + */ + if ((board_id == DB_68XX_ID) || + (board_id == DB_GP_68XX_ID)) { + printf("Device 6810/20 supports only 2 SATA interfaces: SATA Port 3 @ lane3 disabled\n"); + topology_config_ptr[3] = default_lane; + } + /* + * DB-GP on 6820 only: default for Lane4=SATA2 + * --> 6820 supports only 2 SATA interfaces: + * lane 3 disabled + */ + if (board_id == DB_GP_68XX_ID && dev_id == MV_6820) { + printf("Device 6820 supports only 2 SATA interfaces: SATA Port 2 @ lane4 disabled\n"); + topology_config_ptr[4] = default_lane; + } + break; + default: + break; + } + break; + + default: + printf("sys_env_update_device_toplogy: selected topology is not supported by this routine\n"); + break; + } + + return MV_OK; +} + +int load_topology_db_381(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + u8 topology_mode; + struct serdes_map *topology_config_ptr; + u8 twsi_data; + u8 usb3_host0_or_device = 0, usb3_host1_or_device = 0; + + printf("\nInitialize DB-88F6821-BP board topology\n"); + + /* Getting the relevant topology mode (index) */ + topology_mode = topology_config_db_381_mode_get(); + topology_config_ptr = topology_config_db_381[topology_mode]; + + /* Read USB3.0 mode: HOST/DEVICE */ + if (load_topology_usb_mode_get(&twsi_data) == MV_OK) { + usb3_host0_or_device = (twsi_data & 0x1); + /* Only one USB3 device is enabled */ + if (usb3_host0_or_device == 0) + usb3_host1_or_device = ((twsi_data >> 1) & 0x1); + } + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + + /* Update USB3 device if needed */ + if (usb3_host0_or_device == 1 && + serdes_map_array[lane_num].serdes_type == USB3_HOST0) + serdes_map_array[lane_num].serdes_type = USB3_DEVICE; + + if (usb3_host1_or_device == 1 && + serdes_map_array[lane_num].serdes_type == USB3_HOST1) + serdes_map_array[lane_num].serdes_type = USB3_DEVICE; + } + + /* If not detected any SerDes Site module, read 'SatR' lane setup */ + if (topology_mode == DB_381_CONFIG_DEFAULT) + update_topology_satr(serdes_map_array); + + /* update 'sgmiispeed' settings */ + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + u8 topology_mode; + struct serdes_map *topology_config_ptr; + u8 twsi_data; + u8 usb3_host0_or_device = 0, usb3_host1_or_device = 0; + + printf("\nInitialize DB-88F6820-BP board topology\n"); + + /* Getting the relevant topology mode (index) */ + topology_mode = topology_config_db_mode_get(); + + if (topology_mode == DB_NO_TOPOLOGY) + topology_mode = DB_CONFIG_DEFAULT; + + topology_config_ptr = topology_config_db[topology_mode]; + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, topology_mode)); + + /* Read USB3.0 mode: HOST/DEVICE */ + if (load_topology_usb_mode_get(&twsi_data) == MV_OK) { + usb3_host0_or_device = (twsi_data & 0x1); + /* Only one USB3 device is enabled */ + if (usb3_host0_or_device == 0) + usb3_host1_or_device = ((twsi_data >> 1) & 0x1); + } + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + + /* + * Update USB3 device if needed - relevant for + * lane 3,4,5 only + */ + if (lane_num >= 3) { + if ((serdes_map_array[lane_num].serdes_type == + USB3_HOST0) && (usb3_host0_or_device == 1)) + serdes_map_array[lane_num].serdes_type = + USB3_DEVICE; + + if ((serdes_map_array[lane_num].serdes_type == + USB3_HOST1) && (usb3_host1_or_device == 1)) + serdes_map_array[lane_num].serdes_type = + USB3_DEVICE; + } + } + + /* If not detected any SerDes Site module, read 'SatR' lane setup */ + if (topology_mode == DB_CONFIG_DEFAULT) + update_topology_satr(serdes_map_array); + + /* update 'sgmiispeed' settings */ + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db_ap(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + struct serdes_map *topology_config_ptr; + + DEBUG_INIT_FULL_S("\n### load_topology_db_ap ###\n"); + + printf("\nInitialize DB-AP board topology\n"); + topology_config_ptr = db_ap_config_default; + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, DB_CONFIG_DEFAULT)); + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + } + + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db_gp(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + struct serdes_map *topology_config_ptr; + int is_sgmii = 0; + + DEBUG_INIT_FULL_S("\n### load_topology_db_gp ###\n"); + + topology_config_ptr = db_gp_config_default; + + printf("\nInitialize DB-GP board topology\n"); + + /* check S@R: if lane 5 is USB3 or SGMII */ + if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) + printf("%s: TWSI Read failed - Loading Default Topology\n", + __func__); + else { + topology_config_ptr[5].serdes_type = + is_sgmii ? SGMII2 : USB3_HOST1; + topology_config_ptr[5].serdes_speed = is_sgmii ? + SERDES_SPEED_3_125_GBPS : SERDES_SPEED_5_GBPS; + topology_config_ptr[5].serdes_mode = SERDES_DEFAULT_MODE; + } + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, DB_CONFIG_DEFAULT)); + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + } + + /* + * Update 'gpserdes1/2/3' lane configuration , and 'sgmiispeed' + * for SGMII lanes + */ + update_topology_satr(serdes_map_array); + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_db_amc(struct serdes_map *serdes_map_array) +{ + u32 lane_num; + struct serdes_map *topology_config_ptr; + + DEBUG_INIT_FULL_S("\n### load_topology_db_amc ###\n"); + + printf("\nInitialize DB-AMC board topology\n"); + topology_config_ptr = db_amc_config_default; + + /* Update the default board topology device flavours */ + CHECK_STATUS(hws_update_device_toplogy + (topology_config_ptr, DB_CONFIG_DEFAULT)); + + /* Updating the topology map */ + for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) { + serdes_map_array[lane_num].serdes_mode = + topology_config_ptr[lane_num].serdes_mode; + serdes_map_array[lane_num].serdes_speed = + topology_config_ptr[lane_num].serdes_speed; + serdes_map_array[lane_num].serdes_type = + topology_config_ptr[lane_num].serdes_type; + serdes_map_array[lane_num].swap_rx = + topology_config_ptr[lane_num].swap_rx; + serdes_map_array[lane_num].swap_tx = + topology_config_ptr[lane_num].swap_tx; + } + + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_rd(struct serdes_map *serdes_map_array) +{ + u8 mode; + + DEBUG_INIT_FULL_S("\n### load_topology_rd ###\n"); + + DEBUG_INIT_S("\nInit RD board "); + + /* Reading mode */ + DEBUG_INIT_FULL_S("load_topology_rd: getting mode\n"); + if (i2c_read(EEPROM_I2C_ADDR, 0, 2, &mode, 1)) { + DEBUG_INIT_S("load_topology_rd: TWSI Read failed\n"); + return MV_FAIL; + } + + /* Updating the topology map */ + DEBUG_INIT_FULL_S("load_topology_rd: Loading board topology details\n"); + + /* RD mode: 0 = NAS, 1 = AP */ + if (((mode >> 1) & 0x1) == 0) { + CHECK_STATUS(load_topology_rd_nas(serdes_map_array)); + } else { + CHECK_STATUS(load_topology_rd_ap(serdes_map_array)); + } + + update_topology_sgmii_speed(serdes_map_array); + + return MV_OK; +} + +int load_topology_rd_nas(struct serdes_map *serdes_map_array) +{ + int is_sgmii = 0; + u32 i; + + DEBUG_INIT_S("\nInit RD NAS topology "); + + /* check if lane 4 is USB3 or SGMII */ + if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) { + DEBUG_INIT_S("load_topology_rd NAS: TWSI Read failed\n"); + return MV_FAIL; + } + + /* Lane 0 */ + serdes_map_array[0].serdes_type = PEX0; + serdes_map_array[0].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[0].serdes_mode = PEX_ROOT_COMPLEX_X1; + + /* Lane 1 */ + serdes_map_array[1].serdes_type = SATA0; + serdes_map_array[1].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[1].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 2 */ + serdes_map_array[2].serdes_type = SATA1; + serdes_map_array[2].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[2].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 3 */ + serdes_map_array[3].serdes_type = SATA3; + serdes_map_array[3].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[3].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 4 */ + if (is_sgmii == 1) { + DEBUG_INIT_S("Serdes Lane 4 is SGMII\n"); + serdes_map_array[4].serdes_type = SGMII1; + serdes_map_array[4].serdes_speed = SERDES_SPEED_3_125_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } else { + DEBUG_INIT_S("Serdes Lane 4 is USB3\n"); + serdes_map_array[4].serdes_type = USB3_HOST0; + serdes_map_array[4].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } + + /* Lane 5 */ + serdes_map_array[5].serdes_type = SATA2; + serdes_map_array[5].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[5].serdes_mode = SERDES_DEFAULT_MODE; + + /* init swap configuration */ + for (i = 0; i <= 5; i++) { + serdes_map_array[i].swap_rx = 0; + serdes_map_array[i].swap_tx = 0; + } + + return MV_OK; +} + +int load_topology_rd_ap(struct serdes_map *serdes_map_array) +{ + int is_sgmii = 0; + u32 i; + + DEBUG_INIT_S("\nInit RD AP topology "); + + /* check if lane 4 is USB3 or SGMII */ + if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) { + DEBUG_INIT_S("load_topology_rd AP: TWSI Read failed\n"); + return MV_FAIL; + } + + /* Lane 0 */ + serdes_map_array[0].serdes_type = DEFAULT_SERDES; + serdes_map_array[0].serdes_speed = LAST_SERDES_SPEED; + serdes_map_array[0].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 1 */ + serdes_map_array[1].serdes_type = PEX0; + serdes_map_array[1].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[1].serdes_mode = PEX_ROOT_COMPLEX_X1; + + /* Lane 2 */ + serdes_map_array[2].serdes_type = PEX1; + serdes_map_array[2].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[2].serdes_mode = PEX_ROOT_COMPLEX_X1; + + /* Lane 3 */ + serdes_map_array[3].serdes_type = SATA3; + serdes_map_array[3].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[3].serdes_mode = SERDES_DEFAULT_MODE; + + /* Lane 4 */ + if (is_sgmii == 1) { + DEBUG_INIT_S("Serdes Lane 4 is SGMII\n"); + serdes_map_array[4].serdes_type = SGMII1; + serdes_map_array[4].serdes_speed = SERDES_SPEED_3_125_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } else { + DEBUG_INIT_S("Serdes Lane 4 is USB3\n"); + serdes_map_array[4].serdes_type = USB3_HOST0; + serdes_map_array[4].serdes_speed = SERDES_SPEED_5_GBPS; + serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE; + } + + /* Lane 5 */ + serdes_map_array[5].serdes_type = SATA2; + serdes_map_array[5].serdes_speed = SERDES_SPEED_3_GBPS; + serdes_map_array[5].serdes_mode = SERDES_DEFAULT_MODE; + + /* init swap configuration */ + for (i = 0; i <= 5; i++) { + serdes_map_array[i].swap_rx = 0; + serdes_map_array[i].swap_tx = 0; + } + + return MV_OK; +} + +int load_topology_rd_sgmii_usb(int *is_sgmii) +{ + u8 mode; + + /* + * DB-GP board: Device 6810 supports only 2 GbE ports: + * SGMII2 not supported (USE USB3 Host instead) + */ + if (sys_env_device_id_get() == MV_6810) { + printf("Device 6810 supports only 2 GbE ports: SGMII-2 @ lane5 disabled (setting USB3.0 H1 instead)\n"); + *is_sgmii = 0; + return MV_OK; + } + + if (!i2c_read(RD_GET_MODE_ADDR, 1, 2, &mode, 1)) { + *is_sgmii = ((mode >> 2) & 0x1); + } else { + /* else use the default - USB3 */ + *is_sgmii = 0; + } + + if (*is_sgmii) + is_custom_topology = 1; + + printf("Lane 5 detection: %s\n", + *is_sgmii ? "SGMII2" : "USB3.0 Host Port 1"); + + return MV_OK; +} + +/* + * 'usb3port0'/'usb3port1' fields are located in EEPROM, + * at 3rd byte(offset=2), bit 0:1 (respectively) + */ +int load_topology_usb_mode_get(u8 *twsi_data) +{ + if (!i2c_read(EEPROM_I2C_ADDR, 2, 2, twsi_data, 1)) + return MV_OK; + + return MV_ERROR; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h new file mode 100644 index 0000000..3cfb1c7 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h @@ -0,0 +1,124 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _HIGHSPEED_TOPOLOGY_SPEC_H +#define _HIGHSPEED_TOPOLOGY_SPEC_H + +#include "high_speed_env_spec.h" + +/* Topology map options for the DB_A38X_BP board */ +enum topology_config_db { + DB_CONFIG_SLM1363_C, + DB_CONFIG_SLM1363_D, + DB_CONFIG_SLM1363_E, + DB_CONFIG_SLM1363_F, + DB_CONFIG_SLM1364_D, + DB_CONFIG_SLM1364_E, + DB_CONFIG_SLM1364_F, + DB_CONFIG_DEFAULT, + DB_NO_TOPOLOGY +}; + +/* + * this enum must be aligned with topology_config_db_381 array, + * every update to this enum requires update to topology_config_db_381 + * array + */ +enum topology_config_db381 { + DB_CONFIG_SLM1427, /* enum for db_config_slm1427 */ + DB_CONFIG_SLM1426, /* enum for db_config_slm1426 */ + DB_381_CONFIG_DEFAULT, + DB_381_NO_TOPOLOGY +}; + +/* A generic function pointer for loading the board topology map */ +typedef int (*load_topology_func_ptr)(struct serdes_map *serdes_map_array); + +extern load_topology_func_ptr load_topology_func_arr[]; + +/* + * topology_config_db_mode_get - + * + * DESCRIPTION: Gets the relevant topology mode (index). + * for load_topology_db use only. + * INPUT: None. + * OUTPUT: None. + * RETURNS: the topology mode + */ +u8 topology_config_db_mode_get(void); + +/* + * load_topology_xxx - + * + * DESCRIPTION: Loads the board topology for the XXX board + * INPUT: serdes_map_array - The struct that will contain + * the board topology map + * OUTPUT: The board topology map. + * RETURNS: MV_OK for success + * MV_FAIL for failure (a wrong topology mode was read + * from the board) + */ + +/* load_topology_db - Loads the board topology for DB Board */ +int load_topology_db(struct serdes_map *serdes_map_array); + +/* load_topology_rd - Loads the board topology for RD Board */ +int load_topology_rd(struct serdes_map *serdes_map_array); + +/* load_topology_rd_nas - Loads the board topology for RD NAS Board */ +int load_topology_rd_nas(struct serdes_map *serdes_map_array); + +/* load_topology_rd_ap - Loads the board topology for RD Ap Board */ +int load_topology_rd_ap(struct serdes_map *serdes_map_array); + +/* load_topology_db_ap - Loads the board topology for DB-AP Board */ +int load_topology_db_ap(struct serdes_map *serdes_map_array); + +/* load_topology_db_gp - Loads the board topology for DB GP Board */ +int load_topology_db_gp(struct serdes_map *serdes_map_array); + +/* load_topology_db_381 - Loads the board topology for 381 DB-BP Board */ +int load_topology_db_381(struct serdes_map *serdes_map_array); + +/* load_topology_db_amc - Loads the board topology for DB-AMC Board */ +int load_topology_db_amc(struct serdes_map *serdes_map_array); + +/* + * hws_update_device_toplogy + * DESCRIPTION: Update the default board topology for specific device Id + * INPUT: + * topology_config_ptr - pointer to the Serdes mapping + * topology_mode - topology mode (index) + * OUTPUT: None + * RRETURNS: + * MV_OK - if updating the board topology success + * MV_BAD_PARAM - if the input parameter is wrong + */ +int hws_update_device_toplogy(struct serdes_map *topology_config_ptr, + enum topology_config_db topology_mode); + +/* + * load_topology_rd_sgmii_usb - + * + * DESCRIPTION: For RD board check if lane 4 is USB3 or SGMII + * INPUT: None + * OUTPUT: is_sgmii - return 1 if lane 4 is SGMII + * return 0 if lane 4 is USB. + * RETURNS: MV_OK for success + */ +int load_topology_rd_sgmii_usb(int *is_sgmii); + +/* + * load_topology_usb_mode_get - + * + * DESCRIPTION: For DB board check if USB3.0 mode + * INPUT: None + * OUTPUT: twsi_data - return data read from S@R via I2C + * RETURNS: MV_OK for success + */ +int load_topology_usb_mode_get(u8 *twsi_data); + +#endif /* _HIGHSPEED_TOPOLOGY_SPEC_H */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c new file mode 100644 index 0000000..ee2305b --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c @@ -0,0 +1,170 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "seq_exec.h" +#include "high_speed_env_spec.h" + +#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h" + +#if defined(MV_DEBUG_INIT_FULL) || defined(MV_DEBUG) +#define DB(x) x +#else +#define DB(x) +#endif + +/* Array for mapping the operation (write, poll or delay) functions */ +op_execute_func_ptr op_execute_func_arr[] = { + write_op_execute, + delay_op_execute, + poll_op_execute +}; + +int write_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx) +{ + u32 unit_base_reg, unit_offset, data, mask, reg_data, reg_addr; + + /* Getting write op params from the input parameter */ + data = params->data[data_arr_idx]; + mask = params->mask; + + /* an empty operation */ + if (data == NO_DATA) + return MV_OK; + + /* get updated base address since it can be different between Serdes */ + CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg, + params->unit_offset, + &unit_base_reg, &unit_offset)); + + /* Address calculation */ + reg_addr = unit_base_reg + unit_offset * serdes_num; + +#ifdef SEQ_DEBUG + printf("Write: 0x%x: 0x%x (mask 0x%x) - ", reg_addr, data, mask); +#endif + /* Reading old value */ + reg_data = reg_read(reg_addr); + reg_data &= (~mask); + + /* Writing new data */ + data &= mask; + reg_data |= data; + reg_write(reg_addr, reg_data); + +#ifdef SEQ_DEBUG + printf(" - 0x%x\n", reg_data); +#endif + + return MV_OK; +} + +int delay_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx) +{ + u32 delay; + + /* Getting delay op params from the input parameter */ + delay = params->wait_time; +#ifdef SEQ_DEBUG + printf("Delay: %d\n", delay); +#endif + mdelay(delay); + + return MV_OK; +} + +int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx) +{ + u32 unit_base_reg, unit_offset, data, mask, num_of_loops, wait_time; + u32 poll_counter = 0; + u32 reg_addr, reg_data; + + /* Getting poll op params from the input parameter */ + data = params->data[data_arr_idx]; + mask = params->mask; + num_of_loops = params->num_of_loops; + wait_time = params->wait_time; + + /* an empty operation */ + if (data == NO_DATA) + return MV_OK; + + /* get updated base address since it can be different between Serdes */ + CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg, + params->unit_offset, + &unit_base_reg, &unit_offset)); + + /* Address calculation */ + reg_addr = unit_base_reg + unit_offset * serdes_num; + + /* Polling */ +#ifdef SEQ_DEBUG + printf("Poll: 0x%x: 0x%x (mask 0x%x)\n", reg_addr, data, mask); +#endif + + do { + reg_data = reg_read(reg_addr) & mask; + poll_counter++; + udelay(wait_time); + } while ((reg_data != data) && (poll_counter < num_of_loops)); + + if ((poll_counter >= num_of_loops) && (reg_data != data)) { + DEBUG_INIT_S("poll_op_execute: TIMEOUT\n"); + return MV_TIMEOUT; + } + + return MV_OK; +} + +enum mv_op get_cfg_seq_op(struct op_params *params) +{ + if (params->wait_time == 0) + return WRITE_OP; + else if (params->num_of_loops == 0) + return DELAY_OP; + + return POLL_OP; +} + +int mv_seq_exec(u32 serdes_num, u32 seq_id) +{ + u32 seq_idx; + struct op_params *seq_arr; + u32 seq_size; + u32 data_arr_idx; + enum mv_op curr_op; + + DB(printf("\n### mv_seq_exec ###\n")); + DB(printf("seq id: %d\n", seq_id)); + + if (hws_is_serdes_active(serdes_num) != 1) { + printf("mv_seq_exec_ext:Error: SerDes lane %d is not valid\n", + serdes_num); + return MV_BAD_PARAM; + } + + seq_arr = serdes_seq_db[seq_id].op_params_ptr; + seq_size = serdes_seq_db[seq_id].cfg_seq_size; + data_arr_idx = serdes_seq_db[seq_id].data_arr_idx; + + DB(printf("seq_size: %d\n", seq_size)); + DB(printf("data_arr_idx: %d\n", data_arr_idx)); + + /* Executing the sequence operations */ + for (seq_idx = 0; seq_idx < seq_size; seq_idx++) { + curr_op = get_cfg_seq_op(&seq_arr[seq_idx]); + op_execute_func_arr[curr_op](serdes_num, &seq_arr[seq_idx], + data_arr_idx); + } + + return MV_OK; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h new file mode 100644 index 0000000..14f406a --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _SEQ_EXEC_H +#define _SEQ_EXEC_H + +#define NA 0xff +#define DEFAULT_PARAM 0 +#define MV_BOARD_TCLK_ERROR 0xffffffff + +#define NO_DATA 0xffffffff +#define MAX_DATA_ARRAY 5 +#define FIRST_CELL 0 + +/* Operation types */ +enum mv_op { + WRITE_OP, + DELAY_OP, + POLL_OP, +}; + +/* Operation parameters */ +struct op_params { + u32 unit_base_reg; + u32 unit_offset; + u32 mask; + u32 data[MAX_DATA_ARRAY]; /* data array */ + u8 wait_time; /* msec */ + u16 num_of_loops; /* for polling only */ +}; + +/* + * Sequence parameters. Each sequence contains: + * 1. Sequence id. + * 2. Sequence size (total amount of operations during the sequence) + * 3. a series of operations. operations can be write, poll or delay + * 4. index in the data array (the entry where the relevant data sits) + */ +struct cfg_seq { + struct op_params *op_params_ptr; + u8 cfg_seq_size; + u8 data_arr_idx; +}; + +extern struct cfg_seq serdes_seq_db[]; + +/* + * A generic function type for executing an operation (write, poll or delay) + */ +typedef int (*op_execute_func_ptr)(u32 serdes_num, struct op_params *params, + u32 data_arr_idx); + +/* Specific functions for executing each operation */ +int write_op_execute(u32 serdes_num, struct op_params *params, + u32 data_arr_idx); +int delay_op_execute(u32 serdes_num, struct op_params *params, + u32 data_arr_idx); +int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx); +enum mv_op get_cfg_seq_op(struct op_params *params); +int mv_seq_exec(u32 serdes_num, u32 seq_id); + +#endif /*_SEQ_EXEC_H*/ diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c new file mode 100644 index 0000000..efd3873 --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c @@ -0,0 +1,388 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "seq_exec.h" +#include "sys_env_lib.h" + +#include "../../../drivers/ddr/marvell/a38x/ddr3_a38x.h" + +#ifdef CONFIG_ARMADA_38X +enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { +/* 6820 6810 6811 6828 */ +/* PEX_UNIT_ID */ { 4, 3, 3, 4}, +/* ETH_GIG_UNIT_ID */ { 3, 2, 3, 3}, +/* USB3H_UNIT_ID */ { 2, 2, 2, 2}, +/* USB3D_UNIT_ID */ { 1, 1, 1, 1}, +/* SATA_UNIT_ID */ { 2, 2, 2, 4}, +/* QSGMII_UNIT_ID */ { 1, 0, 0, 1}, +/* XAUI_UNIT_ID */ { 0, 0, 0, 0}, +/* RXAUI_UNIT_ID */ { 0, 0, 0, 0} +}; +#else /* if (CONFIG_ARMADA_39X) */ +enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { +/* 6920 6928 */ +/* PEX_UNIT_ID */ { 4, 4}, +/* ETH_GIG_UNIT_ID */ { 3, 4}, +/* USB3H_UNIT_ID */ { 1, 2}, +/* USB3D_UNIT_ID */ { 0, 1}, +/* SATA_UNIT_ID */ { 0, 4}, +/* QSGMII_UNIT_ID */ { 0, 1}, +/* XAUI_UNIT_ID */ { 1, 1}, +/* RXAUI_UNIT_ID */ { 1, 1} +}; +#endif + +u32 g_dev_id = -1; + +u32 mv_board_id_get(void) +{ +#if defined(CONFIG_DB_88F6820_GP) + return DB_GP_68XX_ID; +#else + /* + * Return 0 here for custom board as this should not be used + * for custom boards. + */ + return 0; +#endif +} + +u32 mv_board_tclk_get(void) +{ + u32 value; + + value = (reg_read(DEVICE_SAMPLE_AT_RESET1_REG) >> 15) & 0x1; + + switch (value) { + case (0x0): + return 250000000; + case (0x1): + return 200000000; + default: + return 0xffffffff; + } +} + +u32 mv_board_id_index_get(u32 board_id) +{ + /* + * Marvell Boards use 0x10 as base for Board ID: + * mask MSB to receive index for board ID + */ + return board_id & (MARVELL_BOARD_ID_MASK - 1); +} + +/* + * sys_env_suspend_wakeup_check + * DESCRIPTION: Reads GPIO input for suspend-wakeup indication. + * INPUT: None. + * OUTPUT: + * RETURNS: u32 indicating suspend wakeup status: + * 0 - Not supported, + * 1 - supported: read magic word detect wakeup, + * 2 - detected wakeup from GPIO. + */ +enum suspend_wakeup_status sys_env_suspend_wakeup_check(void) +{ + u32 reg, board_id_index, gpio; + struct board_wakeup_gpio board_gpio[] = MV_BOARD_WAKEUP_GPIO_INFO; + + board_id_index = mv_board_id_index_get(mv_board_id_get()); + if (!(sizeof(board_gpio) / sizeof(struct board_wakeup_gpio) > + board_id_index)) { + printf("\n_failed loading Suspend-Wakeup information (invalid board ID)\n"); + return SUSPEND_WAKEUP_DISABLED; + } + + /* + * - Detect if Suspend-Wakeup is supported on current board + * - Fetch the GPIO number for wakeup status input indication + */ + if (board_gpio[board_id_index].gpio_num == -1) { + /* Suspend to RAM is not supported */ + return SUSPEND_WAKEUP_DISABLED; + } else if (board_gpio[board_id_index].gpio_num == -2) { + /* + * Suspend to RAM is supported but GPIO indication is + * not implemented - Skip + */ + return SUSPEND_WAKEUP_ENABLED; + } else { + gpio = board_gpio[board_id_index].gpio_num; + } + + /* Initialize MPP for GPIO (set MPP = 0x0) */ + reg = reg_read(MPP_CONTROL_REG(MPP_REG_NUM(gpio))); + /* reset MPP21 to 0x0, keep rest of MPP settings*/ + reg &= ~MPP_MASK(gpio); + reg_write(MPP_CONTROL_REG(MPP_REG_NUM(gpio)), reg); + + /* Initialize GPIO as input */ + reg = reg_read(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio))); + reg |= GPP_MASK(gpio); + reg_write(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)), reg); + + /* + * Check GPP for input status from PIC: 0 - regular init, + * 1 - suspend wakeup + */ + reg = reg_read(GPP_DATA_IN_REG(GPP_REG_NUM(gpio))); + + /* if GPIO is ON: wakeup from S2RAM indication detected */ + return (reg & GPP_MASK(gpio)) ? SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED : + SUSPEND_WAKEUP_DISABLED; +} + +/* + * mv_ctrl_dev_id_index_get + * + * DESCRIPTION: return SOC device index + * INPUT: None + * OUTPUT: None + * RETURN: + * return SOC device index + */ +u32 sys_env_id_index_get(u32 ctrl_model) +{ + switch (ctrl_model) { + case MV_6820_DEV_ID: + return MV_6820_INDEX; + case MV_6810_DEV_ID: + return MV_6810_INDEX; + case MV_6811_DEV_ID: + return MV_6811_INDEX; + case MV_6828_DEV_ID: + return MV_6828_INDEX; + case MV_6920_DEV_ID: + return MV_6920_INDEX; + case MV_6928_DEV_ID: + return MV_6928_INDEX; + default: + return MV_6820_INDEX; + } +} + +u32 sys_env_unit_max_num_get(enum unit_id unit) +{ + u32 dev_id_index; + + if (unit >= MAX_UNITS_ID) { + printf("%s: Error: Wrong unit type (%u)\n", __func__, unit); + return 0; + } + + dev_id_index = sys_env_id_index_get(sys_env_model_get()); + return sys_env_soc_unit_nums[unit][dev_id_index]; +} + +/* + * sys_env_model_get + * DESCRIPTION: Returns 16bit describing the device model (ID) as defined + * in Vendor ID configuration register + */ +u16 sys_env_model_get(void) +{ + u32 default_ctrl_id, ctrl_id = reg_read(DEV_ID_REG); + ctrl_id = (ctrl_id & (DEV_ID_REG_DEVICE_ID_MASK)) >> + DEV_ID_REG_DEVICE_ID_OFFS; + + switch (ctrl_id) { + case MV_6820_DEV_ID: + case MV_6810_DEV_ID: + case MV_6811_DEV_ID: + case MV_6828_DEV_ID: + case MV_6920_DEV_ID: + case MV_6928_DEV_ID: + return ctrl_id; + default: + /* Device ID Default for A38x: 6820 , for A39x: 6920 */ + #ifdef CONFIG_ARMADA_38X + default_ctrl_id = MV_6820_DEV_ID; + #else + default_ctrl_id = MV_6920_DEV_ID; + #endif + printf("%s: Error retrieving device ID (%x), using default ID = %x\n", + __func__, ctrl_id, default_ctrl_id); + return default_ctrl_id; + } +} + +/* + * sys_env_device_id_get + * DESCRIPTION: Returns enum (0..7) index of the device model (ID) + */ +u32 sys_env_device_id_get(void) +{ + char *device_id_str[7] = { + "6810", "6820", "6811", "6828", "NONE", "6920", "6928" + }; + + if (g_dev_id != -1) + return g_dev_id; + + g_dev_id = reg_read(DEVICE_SAMPLE_AT_RESET1_REG); + g_dev_id = g_dev_id >> SAR_DEV_ID_OFFS & SAR_DEV_ID_MASK; + printf("Detected Device ID %s\n", device_id_str[g_dev_id]); + + return g_dev_id; +} + +#ifdef MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI +/* +* sys_env_get_topology_update_info +* DESCRIPTION: Read TWSI fields to update DDR topology structure +* INPUT: None +* OUTPUT: None, 0 means no topology update +* RETURN: +* Bit mask of changes topology features +*/ +#ifdef CONFIG_ARMADA_39X +u32 sys_env_get_topology_update_info( + struct topology_update_info *tui) +{ + /* Set 16/32 bit configuration*/ + tui->update_width = 1; + tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT; + +#ifdef CONFIG_DDR3 + if (1 == sys_env_config_get(MV_CONFIG_DDR_BUSWIDTH)) { + /* 16bit */ + tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT; + } else { + /* 32bit */ + tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT; + } +#endif + + /* Set ECC/no ECC bit configuration */ + tui->update_ecc = 1; + if (0 == sys_env_config_get(MV_CONFIG_DDR_ECC_EN)) { + /* NO ECC */ + tui->ecc = TOPOLOGY_UPDATE_ECC_OFF; + } else { + /* ECC */ + tui->ecc = TOPOLOGY_UPDATE_ECC_ON; + } + + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + + return MV_OK; +} +#else /*CONFIG_ARMADA_38X*/ +u32 sys_env_get_topology_update_info( + struct topology_update_info *tui) +{ + u8 config_val; + u8 ecc_mode[A38X_MV_MAX_MARVELL_BOARD_ID - + A38X_MARVELL_BOARD_ID_BASE][5] = TOPOLOGY_UPDATE; + u8 board_id = mv_board_id_get(); + int ret; + + board_id = mv_board_id_index_get(board_id); + ret = i2c_read(EEPROM_I2C_ADDR, 0, 2, &config_val, 1); + if (ret) { + DEBUG_INIT_S("sys_env_get_topology_update_info: TWSI Read failed\n"); + return 0; + } + + /* Set 16/32 bit configuration */ + if ((0 == (config_val & DDR_SATR_CONFIG_MASK_WIDTH)) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT] == 0)) { + /* 16bit by SatR of 32bit mode not supported for the board */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT] != 0)) { + tui->update_width = 1; + tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT; + } + } else { + /* 32bit */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT] != 0)) { + tui->update_width = 1; + tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT; + } + } + + /* Set ECC/no ECC bit configuration */ + if (0 == (config_val & DDR_SATR_CONFIG_MASK_ECC)) { + /* NO ECC */ + tui->update_ecc = 1; + tui->ecc = TOPOLOGY_UPDATE_ECC_OFF; + } else { + /* ECC */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != 0) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC_PUP3] != 0)) { + tui->update_ecc = 1; + tui->ecc = TOPOLOGY_UPDATE_ECC_ON; + } + } + + /* Set ECC pup bit configuration */ + if (0 == (config_val & DDR_SATR_CONFIG_MASK_ECC_PUP)) { + /* PUP3 */ + /* + * Check if PUP3 configuration allowed, if not - + * force Pup4 with warning message + */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC_PUP3] != 0)) { + if (tui->width == TOPOLOGY_UPDATE_WIDTH_16BIT) { + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP3; + } else { + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0)) { + printf("DDR Topology Update: ECC PUP3 not valid for 32bit mode, force ECC in PUP4\n"); + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + } + } + } else { + if (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != + 0) { + printf("DDR Topology Update: ECC on PUP3 not supported, force ECC on PUP4\n"); + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + } + } + } else { + /* PUP4 */ + if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0) || + (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != 0)) { + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP4; + } + } + + /* + * Check for forbidden ECC mode, + * if by default width and pup selection set 32bit ECC mode and this + * mode not supported for the board - config 16bit with ECC on PUP3 + */ + if ((tui->ecc == TOPOLOGY_UPDATE_ECC_ON) && + (tui->width == TOPOLOGY_UPDATE_WIDTH_32BIT)) { + if (ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] == 0) { + printf("DDR Topology Update: 32bit mode with ECC not allowed on this board, forced 16bit with ECC on PUP3\n"); + tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT; + tui->update_ecc_pup3_mode = 1; + tui->ecc_pup_mode_offset = + TOPOLOGY_UPDATE_ECC_OFFSET_PUP3; + } + } + + return MV_OK; +} +#endif /* CONFIG_ARMADA_38X */ +#endif /* MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h new file mode 100644 index 0000000..3e5373c --- /dev/null +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h @@ -0,0 +1,371 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _SYS_ENV_LIB_H +#define _SYS_ENV_LIB_H + +#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h" +#include "../../../drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h" + +/* Serdes definitions */ +#define COMMON_PHY_BASE_ADDR 0x18300 + +#define DEVICE_CONFIGURATION_REG0 0x18284 +#define DEVICE_CONFIGURATION_REG1 0x18288 +#define COMMON_PHY_CONFIGURATION1_REG 0x18300 +#define COMMON_PHY_CONFIGURATION2_REG 0x18304 +#define COMMON_PHY_CONFIGURATION4_REG 0x1830c +#define COMMON_PHY_STATUS1_REG 0x18318 +#define COMMON_PHYS_SELECTORS_REG 0x183fc +#define SOC_CONTROL_REG1 0x18204 +#define GENERAL_PURPOSE_RESERVED0_REG 0x182e0 +#define GBE_CONFIGURATION_REG 0x18460 +#define DEVICE_SAMPLE_AT_RESET1_REG 0x18600 +#define DEVICE_SAMPLE_AT_RESET2_REG 0x18604 +#define DEV_ID_REG 0x18238 + +#define CORE_PLL_PARAMETERS_REG 0xe42e0 +#define CORE_PLL_CONFIG_REG 0xe42e4 + +#define QSGMII_CONTROL_REG1 0x18494 + +#define DEV_ID_REG_DEVICE_ID_OFFS 16 +#define DEV_ID_REG_DEVICE_ID_MASK 0xffff0000 + +#define SAR_DEV_ID_OFFS 27 +#define SAR_DEV_ID_MASK 0x7 + +#define POWER_AND_PLL_CTRL_REG 0xa0004 +#define CALIBRATION_CTRL_REG 0xa0008 +#define DFE_REG0 0xa001c +#define DFE_REG3 0xa0028 +#define RESET_DFE_REG 0xa0148 +#define LOOPBACK_REG 0xa008c +#define SYNC_PATTERN_REG 0xa0090 +#define INTERFACE_REG 0xa0094 +#define ISOLATE_REG 0xa0098 +#define MISC_REG 0xa013c +#define GLUE_REG 0xa0140 +#define GENERATION_DIVIDER_FORCE_REG 0xa0144 +#define PCIE_REG0 0xa0120 +#define LANE_ALIGN_REG0 0xa0124 +#define SQUELCH_FFE_SETTING_REG 0xa0018 +#define G1_SETTINGS_0_REG 0xa0034 +#define G1_SETTINGS_1_REG 0xa0038 +#define G1_SETTINGS_3_REG 0xa0440 +#define G1_SETTINGS_4_REG 0xa0444 +#define G2_SETTINGS_0_REG 0xa003c +#define G2_SETTINGS_1_REG 0xa0040 +#define G2_SETTINGS_2_REG 0xa00f8 +#define G2_SETTINGS_3_REG 0xa0448 +#define G2_SETTINGS_4_REG 0xa044c +#define G3_SETTINGS_0_REG 0xa0044 +#define G3_SETTINGS_1_REG 0xa0048 +#define G3_SETTINGS_3_REG 0xa0450 +#define G3_SETTINGS_4_REG 0xa0454 +#define VTHIMPCAL_CTRL_REG 0xa0104 +#define REF_REG0 0xa0134 +#define CAL_REG6 0xa0168 +#define RX_REG2 0xa0184 +#define RX_REG3 0xa0188 +#define PCIE_REG1 0xa0288 +#define PCIE_REG3 0xa0290 +#define LANE_CFG1_REG 0xa0604 +#define LANE_CFG4_REG 0xa0620 +#define LANE_CFG5_REG 0xa0624 +#define GLOBAL_CLK_CTRL 0xa0704 +#define GLOBAL_MISC_CTRL 0xa0718 +#define GLOBAL_CLK_SRC_HI 0xa0710 + +#define GLOBAL_CLK_CTRL 0xa0704 +#define GLOBAL_MISC_CTRL 0xa0718 +#define GLOBAL_PM_CTRL 0xa0740 + +/* SATA registers */ +#define SATA_CTRL_REG_IND_ADDR 0xa80a0 +#define SATA_CTRL_REG_IND_DATA 0xa80a4 + +#define SATA_VENDOR_PORT_0_REG_ADDR 0xa8178 +#define SATA_VENDOR_PORT_1_REG_ADDR 0xa81f8 +#define SATA_VENDOR_PORT_0_REG_DATA 0xa817c +#define SATA_VENDOR_PORT_1_REG_DATA 0xa81fc + +/* Reference clock values and mask */ +#define POWER_AND_PLL_CTRL_REG_100MHZ_VAL 0x0 +#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1 0x1 +#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2 0x2 +#define POWER_AND_PLL_CTRL_REG_40MHZ_VAL 0x3 +#define GLOBAL_PM_CTRL_REG_25MHZ_VAL 0x7 +#define GLOBAL_PM_CTRL_REG_40MHZ_VAL 0xc +#define LANE_CFG4_REG_25MHZ_VAL 0x200 +#define LANE_CFG4_REG_40MHZ_VAL 0x300 + +#define POWER_AND_PLL_CTRL_REG_MASK (~(0x1f)) +#define GLOBAL_PM_CTRL_REG_MASK (~(0xff)) +#define LANE_CFG4_REG_MASK (~(0x1f00)) + +#define REF_CLK_SELECTOR_VAL_PEX0(reg_val) (reg_val >> 2) & 0x1 +#define REF_CLK_SELECTOR_VAL_PEX1(reg_val) (reg_val >> 3) & 0x1 +#define REF_CLK_SELECTOR_VAL_PEX2(reg_val) (reg_val >> 30) & 0x1 +#define REF_CLK_SELECTOR_VAL_PEX3(reg_val) (reg_val >> 31) & 0x1 +#define REF_CLK_SELECTOR_VAL(reg_val) (reg_val & 0x1) + +#define MAX_SELECTOR_VAL 10 + +/* TWSI addresses */ +/* starting from A38x A0, i2c address of EEPROM is 0x57 */ +#ifdef CONFIG_ARMADA_39X +#define EEPROM_I2C_ADDR 0x50 +#else +#define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \ + MV_88F68XX_Z1_ID ? 0x50 : 0x57) +#endif +#define RD_GET_MODE_ADDR 0x4c +#define DB_GET_MODE_SLM1363_ADDR 0x25 +#define DB_GET_MODE_SLM1364_ADDR 0x24 +#define DB381_GET_MODE_SLM1426_1427_ADDR 0x56 + +/* DB-BP Board 'SatR' mapping */ +#define SATR_DB_LANE1_MAX_OPTIONS 7 +#define SATR_DB_LANE1_CFG_MASK 0x7 +#define SATR_DB_LANE1_CFG_OFFSET 0 +#define SATR_DB_LANE2_MAX_OPTIONS 4 +#define SATR_DB_LANE2_CFG_MASK 0x38 +#define SATR_DB_LANE2_CFG_OFFSET 3 + +/* GP Board 'SatR' mapping */ +#define SATR_GP_LANE1_CFG_MASK 0x4 +#define SATR_GP_LANE1_CFG_OFFSET 2 +#define SATR_GP_LANE2_CFG_MASK 0x8 +#define SATR_GP_LANE2_CFG_OFFSET 3 + +/* For setting MPP2 and MPP3 to be TWSI mode and MPP 0,1 to UART mode */ +#define MPP_CTRL_REG 0x18000 +#define MPP_SET_MASK (~(0xffff)) +#define MPP_SET_DATA (0x1111) +#define MPP_UART1_SET_MASK (~(0xff000)) +#define MPP_UART1_SET_DATA (0x66000) + +#define AVS_DEBUG_CNTR_REG 0xe4124 +#define AVS_DEBUG_CNTR_DEFAULT_VALUE 0x08008073 + +#define AVS_ENABLED_CONTROL 0xe4130 +#define AVS_LOW_VDD_LIMIT_OFFS 4 +#define AVS_LOW_VDD_LIMIT_MASK (0xff << AVS_LOW_VDD_LIMIT_OFFS) +#define AVS_LOW_VDD_LIMIT_VAL (0x27 << AVS_LOW_VDD_LIMIT_OFFS) + +#define AVS_HIGH_VDD_LIMIT_OFFS 12 +#define AVS_HIGH_VDD_LIMIT_MASK (0xff << AVS_HIGH_VDD_LIMIT_OFFS) +#define AVS_HIGH_VDD_LIMIT_VAL (0x27 << AVS_HIGH_VDD_LIMIT_OFFS) + +/* Board ID numbers */ +#define MARVELL_BOARD_ID_MASK 0x10 +/* Customer boards for A38x */ +#define A38X_CUSTOMER_BOARD_ID_BASE 0x0 +#define A38X_CUSTOMER_BOARD_ID0 (A38X_CUSTOMER_BOARD_ID_BASE + 0) +#define A38X_CUSTOMER_BOARD_ID1 (A38X_CUSTOMER_BOARD_ID_BASE + 1) +#define A38X_MV_MAX_CUSTOMER_BOARD_ID (A38X_CUSTOMER_BOARD_ID_BASE + 2) +#define A38X_MV_CUSTOMER_BOARD_NUM (A38X_MV_MAX_CUSTOMER_BOARD_ID - \ + A38X_CUSTOMER_BOARD_ID_BASE) + +/* Marvell boards for A38x */ +#define A38X_MARVELL_BOARD_ID_BASE 0x10 +#define RD_NAS_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 0) +#define DB_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 1) +#define RD_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 2) +#define DB_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 3) +#define DB_GP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 4) +#define DB_BP_6821_ID (A38X_MARVELL_BOARD_ID_BASE + 5) +#define DB_AMC_6820_ID (A38X_MARVELL_BOARD_ID_BASE + 6) +#define A38X_MV_MAX_MARVELL_BOARD_ID (A38X_MARVELL_BOARD_ID_BASE + 7) +#define A38X_MV_MARVELL_BOARD_NUM (A38X_MV_MAX_MARVELL_BOARD_ID - \ + A38X_MARVELL_BOARD_ID_BASE) + +/* Customer boards for A39x */ +#define A39X_CUSTOMER_BOARD_ID_BASE 0x20 +#define A39X_CUSTOMER_BOARD_ID0 (A39X_CUSTOMER_BOARD_ID_BASE + 0) +#define A39X_CUSTOMER_BOARD_ID1 (A39X_CUSTOMER_BOARD_ID_BASE + 1) +#define A39X_MV_MAX_CUSTOMER_BOARD_ID (A39X_CUSTOMER_BOARD_ID_BASE + 2) +#define A39X_MV_CUSTOMER_BOARD_NUM (A39X_MV_MAX_CUSTOMER_BOARD_ID - \ + A39X_CUSTOMER_BOARD_ID_BASE) + +/* Marvell boards for A39x */ +#define A39X_MARVELL_BOARD_ID_BASE 0x30 +#define A39X_DB_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 0) +#define A39X_RD_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 1) +#define A39X_MV_MAX_MARVELL_BOARD_ID (A39X_MARVELL_BOARD_ID_BASE + 2) +#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \ + A39X_MARVELL_BOARD_ID_BASE) + +#ifdef CONFIG_ARMADA_38X +#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE +#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0 +#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1 +#define MV_MAX_CUSTOMER_BOARD_ID A38X_MV_MAX_CUSTOMER_BOARD_ID +#define MV_CUSTOMER_BOARD_NUM A38X_MV_CUSTOMER_BOARD_NUM +#define MARVELL_BOARD_ID_BASE A38X_MARVELL_BOARD_ID_BASE +#define MV_MAX_MARVELL_BOARD_ID A38X_MV_MAX_MARVELL_BOARD_ID +#define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM +#define MV_DEFAULT_BOARD_ID DB_68XX_ID +#define MV_DEFAULT_DEVICE_ID MV_6811 +#elif defined(CONFIG_ARMADA_39X) +#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE +#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0 +#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1 +#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID +#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM +#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE +#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID +#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM +#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID +#define MV_DEFAULT_DEVICE_ID MV_6920 +#endif + +#define MV_INVALID_BOARD_ID 0xffffffff + +/* device revesion */ +#define DEV_VERSION_ID_REG 0x1823c +#define REVISON_ID_OFFS 8 +#define REVISON_ID_MASK 0xf00 + +/* A38x revisions */ +#define MV_88F68XX_Z1_ID 0x0 +#define MV_88F68XX_A0_ID 0x4 +/* A39x revisions */ +#define MV_88F69XX_Z1_ID 0x2 + +#define MPP_CONTROL_REG(id) (0x18000 + (id * 4)) +#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00) +#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04) +#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10) +#define MV_GPP_REGS_BASE(unit) (0x18100 + ((unit) * 0x40)) + +#define MPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 8) +#define MPP_MASK(GPIO_NUM) (0xf << 4 * (GPIO_NUM - \ + (MPP_REG_NUM(GPIO_NUM) * 8))); +#define GPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 32) +#define GPP_MASK(GPIO_NUM) (1 << GPIO_NUM % 32) + +/* device ID */ +/* Armada 38x Family */ +#define MV_6810_DEV_ID 0x6810 +#define MV_6811_DEV_ID 0x6811 +#define MV_6820_DEV_ID 0x6820 +#define MV_6828_DEV_ID 0x6828 +/* Armada 39x Family */ +#define MV_6920_DEV_ID 0x6920 +#define MV_6928_DEV_ID 0x6928 + +enum { + MV_6810, + MV_6820, + MV_6811, + MV_6828, + MV_NONE, + MV_6920, + MV_6928, + MV_MAX_DEV_ID, +}; + +#define MV_6820_INDEX 0 +#define MV_6810_INDEX 1 +#define MV_6811_INDEX 2 +#define MV_6828_INDEX 3 + +#define MV_6920_INDEX 0 +#define MV_6928_INDEX 1 + +#ifdef CONFIG_ARMADA_38X +#define MAX_DEV_ID_NUM 4 +#else +#define MAX_DEV_ID_NUM 2 +#endif + +#define MV_6820_INDEX 0 +#define MV_6810_INDEX 1 +#define MV_6811_INDEX 2 +#define MV_6828_INDEX 3 +#define MV_6920_INDEX 0 +#define MV_6928_INDEX 1 + +enum unit_id { + PEX_UNIT_ID, + ETH_GIG_UNIT_ID, + USB3H_UNIT_ID, + USB3D_UNIT_ID, + SATA_UNIT_ID, + QSGMII_UNIT_ID, + XAUI_UNIT_ID, + RXAUI_UNIT_ID, + MAX_UNITS_ID +}; + +struct board_wakeup_gpio { + u32 board_id; + int gpio_num; +}; + +enum suspend_wakeup_status { + SUSPEND_WAKEUP_DISABLED, + SUSPEND_WAKEUP_ENABLED, + SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED, +}; + +/* + * GPIO status indication for Suspend Wakeup: + * If suspend to RAM is supported and GPIO inidcation is implemented, + * set the gpio number + * If suspend to RAM is supported but GPIO indication is not implemented + * set '-2' + * If suspend to RAM is not supported set '-1' + */ +#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT +#ifdef CONFIG_ARMADA_38X +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {A38X_CUSTOMER_BOARD_ID0, -1 }, \ + {A38X_CUSTOMER_BOARD_ID0, -1 }, \ +}; +#else +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {A39X_CUSTOMER_BOARD_ID0, -1 }, \ + {A39X_CUSTOMER_BOARD_ID0, -1 }, \ +}; +#endif /* CONFIG_ARMADA_38X */ + +#else + +#ifdef CONFIG_ARMADA_38X +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {RD_NAS_68XX_ID, -2 }, \ + {DB_68XX_ID, -1 }, \ + {RD_AP_68XX_ID, -2 }, \ + {DB_AP_68XX_ID, -2 }, \ + {DB_GP_68XX_ID, -2 }, \ + {DB_BP_6821_ID, -2 }, \ + {DB_AMC_6820_ID, -2 }, \ +}; +#else +#define MV_BOARD_WAKEUP_GPIO_INFO { \ + {A39X_RD_69XX_ID, -1 }, \ + {A39X_DB_69XX_ID, -1 }, \ +}; +#endif /* CONFIG_ARMADA_38X */ +#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */ + +u32 mv_board_tclk_get(void); +u32 mv_board_id_get(void); +u32 mv_board_id_index_get(u32 board_id); +u32 sys_env_unit_max_num_get(enum unit_id unit); +enum suspend_wakeup_status sys_env_suspend_wakeup_check(void); +u8 sys_env_device_rev_get(void); +u32 sys_env_device_id_get(void); +u16 sys_env_model_get(void); +struct dlb_config *sys_env_dlb_config_ptr_get(void); +u32 sys_env_get_topology_update_info( + struct topology_update_info *topology_update_info); +u32 sys_env_get_cs_ena_from_reg(void); + +#endif /* _SYS_ENV_LIB_H */ diff --git a/arch/arm/mach-mvebu/serdes/Makefile b/arch/arm/mach-mvebu/serdes/axp/Makefile index a380fee..a380fee 100644 --- a/arch/arm/mach-mvebu/serdes/Makefile +++ b/arch/arm/mach-mvebu/serdes/axp/Makefile diff --git a/arch/arm/mach-mvebu/serdes/board_env_spec.h b/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h index 36e0ed8..36e0ed8 100644 --- a/arch/arm/mach-mvebu/serdes/board_env_spec.h +++ b/arch/arm/mach-mvebu/serdes/axp/board_env_spec.h diff --git a/arch/arm/mach-mvebu/serdes/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index 702273a..702273a 100644 --- a/arch/arm/mach-mvebu/serdes/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c diff --git a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c index 115ec2c..115ec2c 100644 --- a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c diff --git a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h index e5aa1b0..e10574e 100644 --- a/arch/arm/mach-mvebu/serdes/high_speed_env_spec.h +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h @@ -7,7 +7,7 @@ #ifndef __HIGHSPEED_ENV_SPEC_H #define __HIGHSPEED_ENV_SPEC_H -#include "../../../drivers/ddr/mvebu/ddr3_hw_training.h" +#include "../../../drivers/ddr/marvell/axp/ddr3_hw_training.h" typedef enum { SERDES_UNIT_UNCONNECTED = 0x0, diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 402e520..af61ded 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -14,10 +14,21 @@ DECLARE_GLOBAL_DATA_PTR; u32 spl_boot_device(void) { - /* Right now only booting via SPI NOR flash is supported */ +#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) return BOOT_DEVICE_SPI; +#endif +#if defined(CONFIG_SPL_MMC_SUPPORT) + return BOOT_DEVICE_MMC1; +#endif } +#ifdef CONFIG_SPL_MMC_SUPPORT +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} +#endif + void board_init_f(ulong dummy) { /* Set global data pointer */ @@ -26,8 +37,17 @@ void board_init_f(ulong dummy) /* Linux expects the internal registers to be at 0xf1000000 */ arch_cpu_init(); + /* + * Pin muxing needs to be done before UART output, since + * on A38x the UART pins need some re-muxing for output + * to work. + */ + board_early_init_f(); + preloader_console_init(); + timer_init(); + /* First init the serdes PHY's */ serdes_phy_config(); diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c index 40c4bc2..c516c41 100644 --- a/arch/arm/mach-mvebu/timer.c +++ b/arch/arm/mach-mvebu/timer.c @@ -41,6 +41,8 @@ #define timestamp gd->arch.tbl #define lastdec gd->arch.lastinc +static int init_done; + /* Timer reload and current value registers */ struct kwtmr_val { u32 reload; /* Timer reload reg */ @@ -112,6 +114,11 @@ void __udelay(unsigned long usec) */ int timer_init(void) { + /* Only init the timer once */ + if (init_done) + return 0; + init_done = 1; + /* load value into timer */ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR)); writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR)); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 54bd648..ba0b865 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,20 +1,49 @@ if TEGRA +config TEGRA_ARMV7_COMMON + bool "Tegra 32-bit" + select SUPPORT_SPL + select SPL + select OF_CONTROL + select SPL_DISABLE_OF_CONTROL + select CPU_V7 + select DM + select DM_SPI_FLASH + select DM_SERIAL + select DM_I2C + select DM_SPI + select DM_GPIO + choice prompt "Tegra SoC select" optional config TEGRA20 bool "Tegra20 family" + select TEGRA_ARMV7_COMMON config TEGRA30 bool "Tegra30 family" + select TEGRA_ARMV7_COMMON config TEGRA114 bool "Tegra114 family" + select TEGRA_ARMV7_COMMON config TEGRA124 bool "Tegra124 family" + select TEGRA_ARMV7_COMMON + +config TEGRA210 + bool "Tegra210 family" + select OF_CONTROL + select ARM64 + select DM + select DM_SPI_FLASH + select DM_SERIAL + select DM_I2C + select DM_SPI + select DM_GPIO endchoice @@ -25,5 +54,6 @@ source "arch/arm/mach-tegra/tegra20/Kconfig" source "arch/arm/mach-tegra/tegra30/Kconfig" source "arch/arm/mach-tegra/tegra114/Kconfig" source "arch/arm/mach-tegra/tegra124/Kconfig" +source "arch/arm/mach-tegra/tegra210/Kconfig" endif diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index fefc180..0db8ee0 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2010,2011 Nvidia Corporation. +# (C) Copyright 2010-2015 Nvidia Corporation. # # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -24,7 +24,9 @@ obj-y += pinmux-common.o obj-y += powergate.o obj-y += xusb-padctl.o obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o +#TCW Fix this to use a common config switch (CONFIG_LOCK_VPR?) obj-$(CONFIG_TEGRA124) += vpr.o +obj-$(CONFIG_TEGRA210) += vpr.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o ifndef CONFIG_SPL_BUILD @@ -35,3 +37,4 @@ obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_TEGRA30) += tegra30/ obj-$(CONFIG_TEGRA114) += tegra114/ obj-$(CONFIG_TEGRA124) += tegra124/ +obj-$(CONFIG_TEGRA210) += tegra210/ diff --git a/arch/arm/mach-tegra/ap.c b/arch/arm/mach-tegra/ap.c index 0b94e8a..e62dda5 100644 --- a/arch/arm/mach-tegra/ap.c +++ b/arch/arm/mach-tegra/ap.c @@ -1,5 +1,5 @@ /* -* (C) Copyright 2010-2014 +* (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -92,6 +92,13 @@ int tegra_get_chip_sku(void) return TEGRA_SOC_T124; } break; + case CHIPID_TEGRA210: + switch (sku_id) { + case SKU_ID_T210_ENG: + default: + return TEGRA_SOC_T210; + } + break; } /* unknown chip/sku id */ @@ -100,6 +107,7 @@ int tegra_get_chip_sku(void) return TEGRA_SOC_UNKNOWN; } +#ifndef CONFIG_ARM64 static void enable_scu(void) { struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; @@ -131,8 +139,8 @@ static u32 get_odmdata(void) * on BCTs for currently supported SoCs, which are locked down. * If this changes in new chips, we can revisit this algorithm. */ - - u32 bct_start, odmdata; + unsigned long bct_start; + u32 odmdata; bct_start = readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BCTPTR); odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); @@ -222,3 +230,4 @@ void s_init(void) /* init vpr */ config_vpr(); } +#endif diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index 222de6a..40de72d 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -1,11 +1,12 @@ /* - * (C) Copyright 2010-2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <spl.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> @@ -17,6 +18,8 @@ #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/warmboot.h> +void save_boot_params_ret(void); + DECLARE_GLOBAL_DATA_PTR; enum { @@ -29,6 +32,21 @@ enum { UART_COUNT = 5, }; +static bool from_spl __attribute__ ((section(".data"))); + +#ifndef CONFIG_SPL_BUILD +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) +{ + from_spl = r0 != UBOOT_NOT_LOADED_FROM_SPL; + save_boot_params_ret(); +} +#endif + +bool spl_was_boot_source(void) +{ + return from_spl; +} + #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) #if !defined(CONFIG_TEGRA124) #error tegra_cpu_is_non_secure has only been validated on Tegra124 @@ -125,12 +143,18 @@ static int uart_configs[] = { -1, FUNCMUX_UART4_GMI, /* UARTD */ -1, -#else /* Tegra124 */ +#elif defined(CONFIG_TEGRA124) FUNCMUX_UART1_KBC, /* UARTA */ -1, -1, FUNCMUX_UART4_GPIO, /* UARTD */ -1, +#else /* Tegra210 */ + FUNCMUX_UART1_UART1, /* UARTA */ + -1, + -1, + FUNCMUX_UART4_UART4, /* UARTD */ + -1, #endif }; @@ -182,7 +206,7 @@ void board_init_uart_f(void) setup_uarts(uart_ids); } -#ifndef CONFIG_SYS_DCACHE_OFF +#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64) void enable_caches(void) { /* Enable D-cache. I-cache is already enabled in start.S */ diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index ce9b695..36bcfb0 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -196,6 +196,12 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); int board_early_init_f(void) { + /* Do any special system timer/TSC setup */ +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) + if (!tegra_cpu_is_non_secure()) +#endif + arch_timer_init(); + pinmux_init(); board_init_uart_f(); @@ -274,3 +280,19 @@ void pad_init_mmc(struct mmc_host *host) #endif /* T30 */ } #endif /* MMC */ + +#ifdef CONFIG_ARM64 +/* + * Most hardware on 64-bit Tegra is still restricted to DMA to the lower + * 32-bits of the physical address space. Cap the maximum usable RAM area + * at 4 GiB to avoid DMA buffers from being allocated beyond the 32-bit + * boundary that most devices can address. + */ +ulong board_get_usable_ram_top(ulong total_size) +{ + if (gd->ram_top > 0x100000000) + return 0x100000000; + + return gd->ram_top; +} +#endif diff --git a/arch/arm/mach-tegra/cache.c b/arch/arm/mach-tegra/cache.c index 94f5bce..0e9cb97 100644 --- a/arch/arm/mach-tegra/cache.c +++ b/arch/arm/mach-tegra/cache.c @@ -21,6 +21,7 @@ #include <asm/arch-tegra/ap.h> #include <asm/arch/gp_padctrl.h> +#ifndef CONFIG_ARM64 void config_cache(void) { u32 reg = 0; @@ -44,3 +45,4 @@ void config_cache(void) reg |= 2; asm("mcr p15, 1, %0, c9, c0, 2" : : "r" (reg)); } +#endif diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 24047b8..5d968d8 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -113,7 +113,11 @@ int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn, data = readl(&pll->pll_misc); *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT; *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT; - +#if defined(CONFIG_TEGRA210) + /* T210 PLLU uses KCP/KVCO instead of CPCON/LFCON */ + *cpcon = (data & PLLU_KCP_MASK) >> PLLU_KCP_SHIFT; + *lfcon = (data & PLLU_KVCO_MASK) >> PLLU_KVCO_SHIFT; +#endif return 0; } @@ -132,14 +136,28 @@ unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn, * - same fields are always mapped at same offsets, except DCCON * - DCCON is always 0, doesn't conflict * - M,N, P of PLLP values are ignored for PLLP + * NOTE: Above is no longer true with T210 - TBD: FIX THIS */ misc_data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT); +#if defined(CONFIG_TEGRA210) + /* T210 PLLU uses KCP/KVCO instead of cpcon/lfcon */ + if (clkid == CLOCK_ID_USB) { + /* preserve EN_LOCKDET, set by default */ + misc_data = readl(&pll->pll_misc); + misc_data |= (cpcon << PLLU_KCP_SHIFT) | + (lfcon << PLLU_KVCO_SHIFT); + } +#endif data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) | (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT); if (clkid == CLOCK_ID_USB) +#if defined(CONFIG_TEGRA210) + data |= divp << PLLU_DIVP_SHIFT; +#else data |= divp << PLLU_VCO_FREQ_SHIFT; +#endif else data |= divp << PLL_DIVP_SHIFT; if (pll) { @@ -534,8 +552,15 @@ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon) /* Set cpcon to PLL_MISC */ misc_reg = readl(&pll->pll_misc); +#if !defined(CONFIG_TEGRA210) misc_reg &= ~PLL_CPCON_MASK; misc_reg |= cpcon << PLL_CPCON_SHIFT; +#else + /* T210 uses KCP instead, use the most common bit shift (PLLA/U/D2) */ + misc_reg &= ~PLLU_KCP_MASK; + misc_reg |= cpcon << PLLU_KCP_SHIFT; +#endif + writel(misc_reg, &pll->pll_misc); /* Enable PLL */ @@ -608,12 +633,6 @@ void clock_init(void) debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]); debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]); debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]); - - /* Do any special system timer/TSC setup */ -#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) - if (!tegra_cpu_is_non_secure()) -#endif - arch_timer_init(); } static void set_avp_clock_source(u32 src) @@ -634,6 +653,7 @@ static void set_avp_clock_source(u32 src) /* * This function is useful on Tegra30, and any later SoCs that have compatible * PLLP configuration registers. + * NOTE: Not used on Tegra210 - see tegra210_setup_pllp in T210 clock.c */ void tegra30_set_up_pllp(void) { diff --git a/arch/arm/mach-tegra/cpu.c b/arch/arm/mach-tegra/cpu.c index c6f3b02..f7d45e8 100644 --- a/arch/arm/mach-tegra/cpu.c +++ b/arch/arm/mach-tegra/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -29,6 +29,7 @@ int get_num_cpus(void) { struct apb_misc_gp_ctlr *gp; uint rev; + debug("%s entry\n", __func__); gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; @@ -39,6 +40,8 @@ int get_num_cpus(void) break; case CHIPID_TEGRA30: case CHIPID_TEGRA114: + case CHIPID_TEGRA124: + case CHIPID_TEGRA210: default: return 4; break; @@ -128,13 +131,30 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = { { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */ { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */ }, + + /* + * T210: 700 MHz + * + * Register Field Bits Width + * ------------------------------ + * PLLX_BASE p 24:20 5 + * PLLX_BASE n 15: 8 8 + * PLLX_BASE m 7: 0 8 + */ + { + { .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz = 702 MHz*/ + { .n = 73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz = 700.8 MHz*/ + { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz = 696 MHz*/ + { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz = 702 MHz*/ + }, }; static inline void pllx_set_iddq(void) { -#if defined(CONFIG_TEGRA124) +#if defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 reg; + debug("%s entry\n", __func__); /* Disable IDDQ */ reg = readl(&clkrst->crc_pllx_misc3); @@ -151,15 +171,14 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, { int chip = tegra_get_chip(); u32 reg; + debug("%s entry\n", __func__); /* If PLLX is already enabled, just return */ if (readl(&pll->pll_base) & PLL_ENABLE_MASK) { - debug("pllx_set_rate: PLLX already enabled, returning\n"); + debug("%s: PLLX already enabled, returning\n", __func__); return 0; } - debug(" pllx_set_rate entry\n"); - pllx_set_iddq(); /* Set BYPASS, m, n and p to PLLX_BASE */ @@ -182,19 +201,19 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, reg = readl(&pll->pll_base); reg &= ~PLL_BYPASS_MASK; writel(reg, &pll->pll_base); - debug("pllx_set_rate: base = 0x%08X\n", reg); + debug("%s: base = 0x%08X\n", __func__, reg); /* Set lock_enable to PLLX_MISC */ reg = readl(&pll->pll_misc); reg |= PLL_LOCK_ENABLE_MASK; writel(reg, &pll->pll_misc); - debug("pllx_set_rate: misc = 0x%08X\n", reg); + debug("%s: misc = 0x%08X\n", __func__, reg); /* Enable PLLX last, once it's all configured */ reg = readl(&pll->pll_base); reg |= PLL_ENABLE_MASK; writel(reg, &pll->pll_base); - debug("pllx_set_rate: base final = 0x%08X\n", reg); + debug("%s: base final = 0x%08X\n", __func__, reg); return 0; } @@ -206,24 +225,23 @@ void init_pllx(void) int soc_type, sku_info, chip_sku; enum clock_osc_freq osc; struct clk_pll_table *sel; - - debug("init_pllx entry\n"); + debug("%s entry\n", __func__); /* get SOC (chip) type */ soc_type = tegra_get_chip(); - debug(" init_pllx: SoC = 0x%02X\n", soc_type); + debug("%s: SoC = 0x%02X\n", __func__, soc_type); /* get SKU info */ sku_info = tegra_get_sku_info(); - debug(" init_pllx: SKU info byte = 0x%02X\n", sku_info); + debug("%s: SKU info byte = 0x%02X\n", __func__, sku_info); /* get chip SKU, combo of the above info */ chip_sku = tegra_get_chip_sku(); - debug(" init_pllx: Chip SKU = %d\n", chip_sku); + debug("%s: Chip SKU = %d\n", __func__, chip_sku); /* get osc freq */ osc = clock_get_osc_freq(); - debug(" init_pllx: osc = %d\n", osc); + debug("%s: osc = %d\n", __func__, osc); /* set pllx */ sel = &tegra_pll_x_table[chip_sku][osc]; @@ -234,6 +252,7 @@ void enable_cpu_clock(int enable) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 clk; + debug("%s entry\n", __func__); /* * NOTE: @@ -282,6 +301,7 @@ static void remove_cpu_io_clamps(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; + debug("%s entry\n", __func__); /* Remove the clamps on the CPU I/O signals */ reg = readl(&pmc->pmc_remove_clamping); @@ -297,6 +317,7 @@ void powerup_cpu(void) struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; int timeout = IO_STABILIZATION_DELAY; + debug("%s entry\n", __func__); if (!is_cpu_powered()) { /* Toggle the CPU power state (OFF -> ON) */ @@ -336,7 +357,7 @@ void reset_A9_cpu(int reset) int num_cpus = get_num_cpus(); int cpu; - debug("reset_a9_cpu entry\n"); + debug("%s entry\n", __func__); /* Hold CPUs 1 onwards in reset, and CPU 0 if asked */ for (cpu = 1; cpu < num_cpus; cpu++) reset_cmplx_set_enable(cpu, mask, 1); @@ -350,7 +371,7 @@ void clock_enable_coresight(int enable) { u32 rst, src = 2; - debug("clock_enable_coresight entry\n"); + debug("%s entry\n", __func__); clock_set_enable(PERIPH_ID_CORESIGHT, enable); reset_set_enable(PERIPH_ID_CORESIGHT, !enable); @@ -377,6 +398,8 @@ void clock_enable_coresight(int enable) void halt_avp(void) { + debug("%s entry\n", __func__); + for (;;) { writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29), FLOW_CTLR_HALT_COP_EVENTS); diff --git a/arch/arm/mach-tegra/cpu.h b/arch/arm/mach-tegra/cpu.h index b4ca44f..3f38969 100644 --- a/arch/arm/mach-tegra/cpu.h +++ b/arch/arm/mach-tegra/cpu.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2014 + * (C) Copyright 2010-2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -14,7 +14,7 @@ #define NVBL_PLLP_KHZ 216000 #define CSITE_KHZ 144000 #elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \ - defined(CONFIG_TEGRA124) + defined(CONFIG_TEGRA124) || defined(CONFIG_TEGRA210) #define NVBL_PLLP_KHZ 408000 #define CSITE_KHZ 204000 #else @@ -35,7 +35,7 @@ #define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ #define PG_UP_TAG_0 0x0 -#define CORESIGHT_UNLOCK 0xC5ACCE55; +#define CORESIGHT_UNLOCK 0xC5ACCE55 #define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) #define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) @@ -53,6 +53,10 @@ #define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE) +/* SB_AA64_RESET_LOW and _HIGH defines for CPU reset vector */ +#define SB_AA64_RESET_LOW 0x6000C230 +#define SB_AA64_RESET_HIGH 0x6000C234 + struct clk_pll_table { u16 n; u16 m; diff --git a/arch/arm/mach-tegra/lowlevel_init.S b/arch/arm/mach-tegra/lowlevel_init.S index 4bc0a3f..1273f94 100644 --- a/arch/arm/mach-tegra/lowlevel_init.S +++ b/arch/arm/mach-tegra/lowlevel_init.S @@ -10,6 +10,20 @@ #include <config.h> #include <linux/linkage.h> +#ifdef CONFIG_ARM64 + .align 5 +ENTRY(reset_cpu) + /* get address for global reset register */ + ldr x1, =PRM_RSTCTRL + ldr w3, [x1] + /* force reset */ + orr w3, w3, #0x10 + str w3, [x1] + mov w0, w0 +1: + b 1b +ENDPROC(reset_cpu) +#else .align 5 ENTRY(reset_cpu) ldr r1, rstctl @ get addr for global reset @@ -23,3 +37,4 @@ _loop_forever: rstctl: .word PRM_RSTCTRL ENDPROC(reset_cpu) +#endif diff --git a/arch/arm/mach-tegra/pinmux-common.c b/arch/arm/mach-tegra/pinmux-common.c index b4a1432..5862c4a 100644 --- a/arch/arm/mach-tegra/pinmux-common.c +++ b/arch/arm/mach-tegra/pinmux-common.c @@ -78,7 +78,7 @@ (((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE)) #endif -#define _R(offset) (u32 *)(NV_PA_APB_MISC_BASE + (offset)) +#define _R(offset) (u32 *)((unsigned long)NV_PA_APB_MISC_BASE + (offset)) #if defined(CONFIG_TEGRA20) diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig new file mode 100644 index 0000000..147e6a8 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/Kconfig @@ -0,0 +1,18 @@ +if TEGRA210 + +choice + prompt "Tegra210 board select" + +config TARGET_P2571 + bool "NVIDIA Tegra210 P2571 base board" + help + P2571 is a P2530 married to a P1963 I/O board + +endchoice + +config SYS_SOC + default "tegra210" + +source "board/nvidia/p2571/Kconfig" + +endif diff --git a/arch/arm/mach-tegra/tegra210/Makefile b/arch/arm/mach-tegra/tegra210/Makefile new file mode 100644 index 0000000..1fb8d1a --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2013-2015 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += clock.o +obj-y += funcmux.o +obj-y += pinmux.o +obj-y += xusb-padctl.o diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c new file mode 100644 index 0000000..4e7d793 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -0,0 +1,1091 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 Clock control functions */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/sysctr.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> +#include <div64.h> +#include <fdtdec.h> + +/* + * Clock types that we can use as a source. The Tegra210 has muxes for the + * peripheral clocks, and in most cases there are four options for the clock + * source. This gives us a clock 'type' and exploits what commonality exists + * in the device. + * + * Letters are obvious, except for T which means CLK_M, and S which means the + * clock derived from 32KHz. Beware that CLK_M (also called OSC in the + * datasheet) and PLL_M are different things. The former is the basic + * clock supplied to the SOC from an external oscillator. The latter is the + * memory clock PLL. + * + * See definitions in clock_id in the header file. + */ +enum clock_type_id { + CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ + CLOCK_TYPE_MCPA, /* and so on */ + CLOCK_TYPE_MCPT, + CLOCK_TYPE_PCM, + CLOCK_TYPE_PCMT, + CLOCK_TYPE_PDCT, + CLOCK_TYPE_ACPT, + CLOCK_TYPE_ASPTE, + CLOCK_TYPE_PMDACD2T, + CLOCK_TYPE_PCST, + + CLOCK_TYPE_PC2CC3M, + CLOCK_TYPE_PC2CC3S_T, + CLOCK_TYPE_PC2CC3M_T, + CLOCK_TYPE_PC2CC3M_T16, /* PC2CC3M_T, but w/16-bit divisor (I2C) */ + CLOCK_TYPE_MC2CC3P_A, + CLOCK_TYPE_M, + CLOCK_TYPE_MCPTM2C2C3, + CLOCK_TYPE_PC2CC3T_S, + CLOCK_TYPE_AC2CC3P_TS2, + CLOCK_TYPE_PC01C00_C42C41TC40, + + CLOCK_TYPE_COUNT, + CLOCK_TYPE_NONE = -1, /* invalid clock type */ +}; + +enum { + CLOCK_MAX_MUX = 8 /* number of source options for each clock */ +}; + +/* + * Clock source mux for each clock type. This just converts our enum into + * a list of mux sources for use by the code. + * + * Note: + * The extra column in each clock source array is used to store the mask + * bits in its register for the source. + */ +#define CLK(x) CLOCK_ID_ ## x +static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { + { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), + CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), + CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_28}, + + /* Additional clock types on Tegra114+ */ + /* CLOCK_TYPE_PC2CC3M */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3S_T */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(SFROM32KHZ), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3M_T */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_MC2CC3P_A */ + { CLK(MEMORY), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(PERIPH), CLK(NONE), CLK(AUDIO), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_M */ + { CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + /* CLOCK_TYPE_MCPTM2C2C3 */ + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(MEMORY2), CLK(CGENERAL2), CLK(CGENERAL3), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC2CC3T_S */ + { CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(OSC), CLK(NONE), CLK(SFROM32KHZ), CLK(NONE), + MASK_BITS_31_29}, + /* CLOCK_TYPE_AC2CC3P_TS2 */ + { CLK(AUDIO), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3), + CLK(PERIPH), CLK(NONE), CLK(OSC), CLK(SRC2), + MASK_BITS_31_29}, + /* CLOCK_TYPE_PC01C00_C42C41TC40 */ + { CLK(PERIPH), CLK(CGENERAL_1), CLK(CGENERAL_0), CLK(NONE), + CLK(CGENERAL4_2), CLK(CGENERAL4_1), CLK(OSC), CLK(CGENERAL4_0), + MASK_BITS_31_29}, +}; + +/* + * Clock type for each peripheral clock source. We put the name in each + * record just so it is easy to match things up + */ +#define TYPE(name, type) type +static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { + /* 0x00 */ + TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PC2CC3M), + TYPE(PERIPHC_PWM, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_05h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC2, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SBC3, CLOCK_TYPE_PC2CC3M_T), + + /* 0x08 */ + TYPE(PERIPHC_08h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C1, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_I2C5, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_0bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_0ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), + TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), + + /* 0x10 */ + TYPE(PERIPHC_10h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_11h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_13h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_16h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_17h, CLOCK_TYPE_NONE), + + /* 0x18 */ + TYPE(PERIPHC_18h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_VFIR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_1Bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_1Ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_HSI, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART1, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART2, CLOCK_TYPE_PC2CC3M_T), + + /* 0x20 */ + TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_21h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_22h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_23h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_24h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_25h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C2, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPTM2C2C3), + + /* 0x28 */ + TYPE(PERIPHC_UART3, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_29h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_SENSOR, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_2bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_2ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_I2C3, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PC2CC3M_T), + + /* 0x30 */ + TYPE(PERIPHC_UART4, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_UART5, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_VDE, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_OWR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_NOR, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_CSITE, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_DTV, CLOCK_TYPE_NONE), + + /* 0x38 */ + TYPE(PERIPHC_38h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_39h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_3ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_3bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_MSENC, CLOCK_TYPE_MC2CC3P_A), + TYPE(PERIPHC_TSEC, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_3eh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_OSC, CLOCK_TYPE_NONE), + + /* 0x40 */ + TYPE(PERIPHC_40h, CLOCK_TYPE_NONE), /* start with 0x3b0 */ + TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PC2CC3T_S), + TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S5, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2C4, CLOCK_TYPE_PC2CC3M_T16), + TYPE(PERIPHC_SBC5, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_SBC6, CLOCK_TYPE_PC2CC3M_T), + + /* 0x48 */ + TYPE(PERIPHC_AUDIO, CLOCK_TYPE_AC2CC3P_TS2), + TYPE(PERIPHC_49h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_4ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_4bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_4ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), + + /* 0x50 */ + TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_52h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PC2CC3S_T), + TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_55h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_56h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_57h, CLOCK_TYPE_NONE), + + /* 0x58 */ + TYPE(PERIPHC_58h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_59h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_5ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_5bh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_HDA, CLOCK_TYPE_PC2CC3M_T), + TYPE(PERIPHC_5fh, CLOCK_TYPE_NONE), + + /* 0x60 */ + TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_FS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE), + TYPE(PERIPHC_XUSB_SS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILAB, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILCD, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CILE, CLOCK_TYPE_NONE), + + /* 0x68 */ + TYPE(PERIPHC_DSIA_LP, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DSIB_LP, CLOCK_TYPE_NONE), + TYPE(PERIPHC_ENTROPY, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DVFS_REF, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DVFS_SOC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE), + TYPE(PERIPHC_6eh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_6fh, CLOCK_TYPE_NONE), + + /* 0x70 */ + TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SOC_THERM, CLOCK_TYPE_NONE), + TYPE(PERIPHC_72h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_73h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_74h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_75h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C6, CLOCK_TYPE_PC2CC3M_T16), + + /* 0x78 */ + TYPE(PERIPHC_78h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_EMC_DLL, CLOCK_TYPE_MCPTM2C2C3), + TYPE(PERIPHC_7ah, CLOCK_TYPE_NONE), + TYPE(PERIPHC_CLK72MHZ, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7ch, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7dh, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VIC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_7Fh, CLOCK_TYPE_NONE), + + /* 0x80 */ + TYPE(PERIPHC_SDMMC_LEGACY_TM, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NVDEC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NVJPG, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NVENC, CLOCK_TYPE_NONE), + TYPE(PERIPHC_84h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_85h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_86h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_87h, CLOCK_TYPE_NONE), + + /* 0x88 */ + TYPE(PERIPHC_88h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_89h, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DMIC3, CLOCK_TYPE_NONE), + TYPE(PERIPHC_APE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_QSPI, CLOCK_TYPE_PC01C00_C42C41TC40), + TYPE(PERIPHC_VI_I2C, CLOCK_TYPE_NONE), + TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE), + TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE), + + /* 0x90 */ + TYPE(PERIPHC_MAUD, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TSECB, CLOCK_TYPE_NONE), +}; + +/* + * This array translates a periph_id to a periphc_internal_id + * + * Not present/matched up: + * uint vi_sensor; _VI_SENSOR_0, 0x1A8 + * SPDIF - which is both 0x08 and 0x0c + * + */ +#define NONE(name) (-1) +#define OFFSET(name, value) PERIPHC_ ## name +#define INTERNAL_ID(id) (id & 0x000000ff) +static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { + /* Low word: 31:0 */ + NONE(CPU), + NONE(COP), + NONE(TRIGSYS), + NONE(ISPB), + NONE(RESERVED4), + NONE(TMR), + PERIPHC_UART1, + PERIPHC_UART2, /* and vfir 0x68 */ + + /* 8 */ + NONE(GPIO), + PERIPHC_SDMMC2, + PERIPHC_SPDIF_IN, + PERIPHC_I2S2, + PERIPHC_I2C1, + NONE(RESERVED13), + PERIPHC_SDMMC1, + PERIPHC_SDMMC4, + + /* 16 */ + NONE(TCW), + PERIPHC_PWM, + PERIPHC_I2S3, + NONE(RESERVED19), + PERIPHC_VI, + NONE(RESERVED21), + NONE(USBD), + NONE(ISP), + + /* 24 */ + NONE(RESERVED24), + NONE(RESERVED25), + PERIPHC_DISP2, + PERIPHC_DISP1, + PERIPHC_HOST1X, + NONE(VCP), + PERIPHC_I2S1, + NONE(CACHE2), + + /* Middle word: 63:32 */ + NONE(MEM), + NONE(AHBDMA), + NONE(APBDMA), + NONE(RESERVED35), + NONE(RESERVED36), + NONE(STAT_MON), + NONE(RESERVED38), + NONE(FUSE), + + /* 40 */ + NONE(KFUSE), + PERIPHC_SBC1, /* SBCx = SPIx */ + PERIPHC_NOR, + NONE(RESERVED43), + PERIPHC_SBC2, + NONE(XIO), + PERIPHC_SBC3, + PERIPHC_I2C5, + + /* 48 */ + NONE(DSI), + NONE(RESERVED49), + PERIPHC_HSI, + NONE(RESERVED51), + NONE(CSI), + NONE(RESERVED53), + PERIPHC_I2C2, + PERIPHC_UART3, + + /* 56 */ + NONE(MIPI_CAL), + PERIPHC_EMC, + NONE(USB2), + NONE(USB3), + NONE(RESERVED60), + PERIPHC_VDE, + NONE(BSEA), + NONE(BSEV), + + /* Upper word 95:64 */ + NONE(RESERVED64), + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_I2C3, + PERIPHC_SBC4, + PERIPHC_SDMMC3, + NONE(PCIE), + PERIPHC_OWR, + + /* 72 */ + NONE(AFI), + PERIPHC_CSITE, + NONE(PCIEXCLK), + NONE(AVPUCQ), + NONE(LA), + NONE(TRACECLKIN), + NONE(SOC_THERM), + NONE(DTV), + + /* 80 */ + NONE(RESERVED80), + PERIPHC_I2CSLOW, + NONE(DSIB), + PERIPHC_TSEC, + NONE(RESERVED84), + NONE(RESERVED85), + NONE(RESERVED86), + NONE(EMUCIF), + + /* 88 */ + NONE(RESERVED88), + NONE(XUSB_HOST), + NONE(RESERVED90), + PERIPHC_MSENC, + NONE(RESERVED92), + NONE(RESERVED93), + NONE(RESERVED94), + NONE(XUSB_DEV), + + /* V word: 31:0 */ + NONE(CPUG), + NONE(CPULP), + NONE(V_RESERVED2), + PERIPHC_MSELECT, + NONE(V_RESERVED4), + PERIPHC_I2S4, + PERIPHC_I2S5, + PERIPHC_I2C4, + + /* 104 */ + PERIPHC_SBC5, + PERIPHC_SBC6, + PERIPHC_AUDIO, + NONE(APBIF), + NONE(V_RESERVED12), + NONE(V_RESERVED13), + NONE(V_RESERVED14), + PERIPHC_HDA2CODEC2X, + + /* 112 */ + NONE(ATOMICS), + NONE(V_RESERVED17), + NONE(V_RESERVED18), + NONE(V_RESERVED19), + NONE(V_RESERVED20), + NONE(V_RESERVED21), + NONE(V_RESERVED22), + PERIPHC_ACTMON, + + /* 120 */ + NONE(EXTPERIPH1), + NONE(EXTPERIPH2), + NONE(EXTPERIPH3), + NONE(OOB), + PERIPHC_SATA, + PERIPHC_HDA, + NONE(TZRAM), + NONE(SE), + + /* W word: 31:0 */ + NONE(HDA2HDMICODEC), + NONE(SATACOLD), + NONE(W_RESERVED2), + NONE(W_RESERVED3), + NONE(W_RESERVED4), + NONE(W_RESERVED5), + NONE(W_RESERVED6), + NONE(W_RESERVED7), + + /* 136 */ + NONE(CEC), + NONE(W_RESERVED9), + NONE(W_RESERVED10), + NONE(W_RESERVED11), + NONE(W_RESERVED12), + NONE(W_RESERVED13), + NONE(XUSB_PADCTL), + NONE(W_RESERVED15), + + /* 144 */ + NONE(W_RESERVED16), + NONE(W_RESERVED17), + NONE(W_RESERVED18), + NONE(W_RESERVED19), + NONE(W_RESERVED20), + NONE(ENTROPY), + NONE(DDS), + NONE(W_RESERVED23), + + /* 152 */ + NONE(W_RESERVED24), + NONE(W_RESERVED25), + NONE(W_RESERVED26), + NONE(DVFS), + NONE(XUSB_SS), + NONE(W_RESERVED29), + NONE(W_RESERVED30), + NONE(W_RESERVED31), + + /* X word: 31:0 */ + NONE(SPARE), + NONE(X_RESERVED1), + NONE(X_RESERVED2), + NONE(X_RESERVED3), + NONE(CAM_MCLK), + NONE(CAM_MCLK2), + PERIPHC_I2C6, + NONE(X_RESERVED7), + + /* 168 */ + NONE(X_RESERVED8), + NONE(X_RESERVED9), + NONE(X_RESERVED10), + NONE(VIM2_CLK), + NONE(X_RESERVED12), + NONE(X_RESERVED13), + NONE(EMC_DLL), + NONE(X_RESERVED15), + + /* 176 */ + NONE(X_RESERVED16), + NONE(CLK72MHZ), + NONE(VIC), + NONE(X_RESERVED19), + NONE(X_RESERVED20), + NONE(DPAUX), + NONE(SOR0), + NONE(X_RESERVED23), + + /* 184 */ + NONE(GPU), + NONE(X_RESERVED25), + NONE(X_RESERVED26), + NONE(X_RESERVED27), + NONE(X_RESERVED28), + NONE(X_RESERVED29), + NONE(X_RESERVED30), + NONE(X_RESERVED31), + + /* Y: 192 (192 - 223) */ + NONE(Y_RESERVED0), + PERIPHC_SDMMC_LEGACY_TM, + PERIPHC_NVDEC, + PERIPHC_NVJPG, + NONE(Y_RESERVED4), + PERIPHC_DMIC3, /* 197 */ + PERIPHC_APE, /* 198 */ + NONE(Y_RESERVED7), + + /* 200 */ + NONE(Y_RESERVED8), + NONE(Y_RESERVED9), + NONE(Y_RESERVED10), + NONE(Y_RESERVED11), + NONE(Y_RESERVED12), + NONE(Y_RESERVED13), + NONE(Y_RESERVED14), + NONE(Y_RESERVED15), + + /* 208 */ + PERIPHC_VI_I2C, /* 208 */ + NONE(Y_RESERVED17), + NONE(Y_RESERVED18), + PERIPHC_QSPI, /* 211 */ + NONE(Y_RESERVED20), + NONE(Y_RESERVED21), + NONE(Y_RESERVED22), + NONE(Y_RESERVED23), + + /* 216 */ + NONE(Y_RESERVED24), + NONE(Y_RESERVED25), + NONE(Y_RESERVED26), + PERIPHC_NVENC, /* 219 */ + NONE(Y_RESERVED28), + NONE(Y_RESERVED29), + NONE(Y_RESERVED30), + NONE(Y_RESERVED31), +}; + +/* + * Get the oscillator frequency, from the corresponding hardware configuration + * field. Note that Tegra30+ support 3 new higher freqs, but we map back + * to the old T20 freqs. Support for the higher oscillators is TBD. + */ +enum clock_osc_freq clock_get_osc_freq(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + reg = readl(&clkrst->crc_osc_ctrl); + reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; + /* + * 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz, + * 8 = 12MHz, 9 = 48MHz, 12 = 26MHz + */ + if (reg == 5) { + debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg); + /* Map it to 19.2MHz for now. 38.4MHz OSC support TBD */ + return 1; + } + + /* + * Map to most common (T20) freqs (except 38.4, handled above): + * 13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3 + */ + return reg >> 2; +} + +/* Returns a pointer to the clock source register for a peripheral */ +u32 *get_periph_source_reg(enum periph_id periph_id) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + enum periphc_internal_id internal_id; + + /* Coresight is a special case */ + if (periph_id == PERIPH_ID_CSI) + return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; + + assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); + internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); + assert(internal_id != -1); + + if (internal_id < PERIPHC_VW_FIRST) + /* L, H, U */ + return &clkrst->crc_clk_src[internal_id]; + + if (internal_id < PERIPHC_X_FIRST) { + /* VW */ + internal_id -= PERIPHC_VW_FIRST; + return &clkrst->crc_clk_src_vw[internal_id]; + } + + if (internal_id < PERIPHC_Y_FIRST) { + /* X */ + internal_id -= PERIPHC_X_FIRST; + return &clkrst->crc_clk_src_x[internal_id]; + } + + /* Y */ + internal_id -= PERIPHC_Y_FIRST; + return &clkrst->crc_clk_src_y[internal_id]; +} + +/** + * Given a peripheral ID and the required source clock, this returns which + * value should be programmed into the source mux for that peripheral. + * + * There is special code here to handle the one source type with 5 sources. + * + * @param periph_id peripheral to start + * @param source PLL id of required parent clock + * @param mux_bits Set to number of bits in mux register: 2 or 4 + * @param divider_bits Set to number of divider bits (8 or 16) + * @return mux value (0-4, or -1 if not found) + */ +int get_periph_clock_source(enum periph_id periph_id, + enum clock_id parent, int *mux_bits, int *divider_bits) +{ + enum clock_type_id type; + enum periphc_internal_id internal_id; + int mux; + + assert(clock_periph_id_isvalid(periph_id)); + + internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); + assert(periphc_internal_id_isvalid(internal_id)); + + type = clock_periph_type[internal_id]; + assert(clock_type_id_isvalid(type)); + + *mux_bits = clock_source[type][CLOCK_MAX_MUX]; + + if (type == CLOCK_TYPE_PC2CC3M_T16) + *divider_bits = 16; + else + *divider_bits = 8; + + for (mux = 0; mux < CLOCK_MAX_MUX; mux++) + if (clock_source[type][mux] == parent) + return mux; + + /* if we get here, either us or the caller has made a mistake */ + printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, + parent); + return -1; +} + +void clock_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *clk; + u32 reg; + + /* Enable/disable the clock to this peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) + clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_X_FIRST) + clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST) + clk = &clkrst->crc_clk_out_enb_x; + else + clk = &clkrst->crc_clk_out_enb_y; + + reg = readl(clk); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, clk); +} + +void reset_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *reset; + u32 reg; + + /* Enable/disable reset to the peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if (periph_id < PERIPH_ID_VW_FIRST) + reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_X_FIRST) + reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; + else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST) + reset = &clkrst->crc_rst_devices_x; + else + reset = &clkrst->crc_rst_devices_y; + + reg = readl(reset); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, reset); +} + +#ifdef CONFIG_OF_CONTROL +/* + * Convert a device tree clock ID to our peripheral ID. They are mostly + * the same but we are very cautious so we check that a valid clock ID is + * provided. + * + * @param clk_id Clock ID according to tegra210 device tree binding + * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + */ +enum periph_id clk_id_to_periph_id(int clk_id) +{ + if (clk_id > PERIPH_ID_COUNT) + return PERIPH_ID_NONE; + + switch (clk_id) { + case PERIPH_ID_RESERVED4: + case PERIPH_ID_RESERVED25: + case PERIPH_ID_RESERVED35: + case PERIPH_ID_RESERVED36: + case PERIPH_ID_RESERVED38: + case PERIPH_ID_RESERVED43: + case PERIPH_ID_RESERVED49: + case PERIPH_ID_RESERVED53: + case PERIPH_ID_RESERVED64: + case PERIPH_ID_RESERVED84: + case PERIPH_ID_RESERVED85: + case PERIPH_ID_RESERVED86: + case PERIPH_ID_RESERVED88: + case PERIPH_ID_RESERVED90: + case PERIPH_ID_RESERVED92: + case PERIPH_ID_RESERVED93: + case PERIPH_ID_RESERVED94: + case PERIPH_ID_V_RESERVED2: + case PERIPH_ID_V_RESERVED4: + case PERIPH_ID_V_RESERVED17: + case PERIPH_ID_V_RESERVED18: + case PERIPH_ID_V_RESERVED19: + case PERIPH_ID_V_RESERVED20: + case PERIPH_ID_V_RESERVED21: + case PERIPH_ID_V_RESERVED22: + case PERIPH_ID_W_RESERVED2: + case PERIPH_ID_W_RESERVED3: + case PERIPH_ID_W_RESERVED4: + case PERIPH_ID_W_RESERVED5: + case PERIPH_ID_W_RESERVED6: + case PERIPH_ID_W_RESERVED7: + case PERIPH_ID_W_RESERVED9: + case PERIPH_ID_W_RESERVED10: + case PERIPH_ID_W_RESERVED11: + case PERIPH_ID_W_RESERVED12: + case PERIPH_ID_W_RESERVED13: + case PERIPH_ID_W_RESERVED15: + case PERIPH_ID_W_RESERVED16: + case PERIPH_ID_W_RESERVED17: + case PERIPH_ID_W_RESERVED18: + case PERIPH_ID_W_RESERVED19: + case PERIPH_ID_W_RESERVED20: + case PERIPH_ID_W_RESERVED23: + case PERIPH_ID_W_RESERVED29: + case PERIPH_ID_W_RESERVED30: + case PERIPH_ID_W_RESERVED31: + return PERIPH_ID_NONE; + default: + return clk_id; + } +} +#endif /* CONFIG_OF_CONTROL */ + +/* + * T210 redefines PLLP_OUT2 as PLLP_VCO/DIVP, so do different OUT1-4 setup here. + * PLLP_BASE/MISC/etc. is already set up for 408MHz in the BootROM. + */ +void tegra210_setup_pllp(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + /* Set PLLP_OUT1, 3 & 4 freqs to 9.6, 102 & 204MHz */ + + /* OUT1 */ + /* Assert RSTN before enable */ + reg = PLLP_OUT1_RSTN_EN; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); + /* Set divisor and reenable */ + reg = (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) + | PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]); + + /* OUT3, 4 */ + /* Assert RSTN before enable */ + reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); + /* Set divisor and reenable */ + reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) + | PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS + | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) + | PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS; + writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]); + + /* + * NOTE: If you want to change PLLP_OUT2 away from 204MHz, + * you can change PLLP_BASE DIVP here. Currently defaults + * to 1, which is 2^1, or 2, so PLLP_OUT2 is 204MHz. + * See Table 13 in section 5.1.4 in T210 TRM for more info. + */ +} + +void clock_early_init(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 data; + + tegra210_setup_pllp(); + + /* + * PLLC output frequency set to 600Mhz + * PLLD output frequency set to 925Mhz + */ + switch (clock_get_osc_freq()) { + case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); + break; + + case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); + break; + + case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ + clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); + break; + case CLOCK_OSC_FREQ_19_2: + clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0); + clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12); + break; + default: + /* + * These are not supported. It is too early to print a + * message and the UART likely won't work anyway due to the + * oscillator being wrong. + */ + break; + } + + /* PLLC_MISC1: Turn IDDQ off. NOTE: T210 PLLC_MISC_1 maps to pll_misc */ + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, + (1 << PLLC_IDDQ)); + udelay(2); + + /* + * PLLC_MISC: Take PLLC out of reset. NOTE: T210 PLLC_MISC maps + * to pll_out[1] + */ + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1], + (1 << PLLC_RESET)); + udelay(2); + + /* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */ + data = (1 << PLLD_ENABLE_CLK) | (1 << PLLD_EN_LCKDET); + writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); + udelay(2); +} + +void arch_timer_init(void) +{ + struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; + u32 freq, val; + + freq = clock_get_rate(CLOCK_ID_OSC); + debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); + + /* ARM CNTFRQ */ +#ifndef CONFIG_ARM64 + asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); +#endif + + /* Only Tegra114+ has the System Counter regs */ + debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); + writel(freq, &sysctr->cntfid0); + + val = readl(&sysctr->cntcr); + val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG; + writel(val, &sysctr->cntcr); + debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); +} + +#define PLLE_SS_CNTL 0x68 +#define PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24) +#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16) +#define PLLE_SS_CNTL_SSCINVERT (1 << 15) +#define PLLE_SS_CNTL_SSCCENTER (1 << 14) +#define PLLE_SS_CNTL_SSCBYP (1 << 12) +#define PLLE_SS_CNTL_INTERP_RESET (1 << 11) +#define PLLE_SS_CNTL_BYPASS_SS (1 << 10) +#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0) + +#define PLLE_BASE 0x0e8 +#define PLLE_BASE_ENABLE (1 << 30) +#define PLLE_BASE_LOCK_OVERRIDE (1 << 29) +#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24) +#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8) +#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0) + +#define PLLE_MISC 0x0ec +#define PLLE_MISC_IDDQ_SWCTL (1 << 14) +#define PLLE_MISC_IDDQ_OVERRIDE (1 << 13) +#define PLLE_MISC_LOCK_ENABLE (1 << 9) +#define PLLE_MISC_PTS (1 << 8) +#define PLLE_MISC_VREG_BG_CTRL(x) (((x) & 0x3) << 4) +#define PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2) + +#define PLLE_AUX 0x48c +#define PLLE_AUX_SEQ_ENABLE (1 << 24) +#define PLLE_AUX_ENABLE_SWCTL (1 << 4) + +int tegra_plle_enable(void) +{ + unsigned int m = 1, n = 200, cpcon = 13; + u32 value; + + value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); + value &= ~PLLE_BASE_LOCK_OVERRIDE; + writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX); + value |= PLLE_AUX_ENABLE_SWCTL; + value &= ~PLLE_AUX_SEQ_ENABLE; + writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); + value |= PLLE_MISC_IDDQ_SWCTL; + value &= ~PLLE_MISC_IDDQ_OVERRIDE; + value |= PLLE_MISC_LOCK_ENABLE; + value |= PLLE_MISC_PTS; + value |= PLLE_MISC_VREG_BG_CTRL(3); + value |= PLLE_MISC_VREG_CTRL(2); + writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); + + udelay(5); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET | + PLLE_SS_CNTL_BYPASS_SS; + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); + value &= ~PLLE_BASE_PLDIV_CML(0xf); + value &= ~PLLE_BASE_NDIV(0xff); + value &= ~PLLE_BASE_MDIV(0xff); + value |= PLLE_BASE_PLDIV_CML(cpcon); + value |= PLLE_BASE_NDIV(n); + value |= PLLE_BASE_MDIV(m); + writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); + value |= PLLE_BASE_ENABLE; + writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); + + /* wait for lock */ + udelay(300); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value &= ~PLLE_SS_CNTL_SSCINVERT; + value &= ~PLLE_SS_CNTL_SSCCENTER; + + value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f); + value &= ~PLLE_SS_CNTL_SSCINC(0xff); + value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff); + + value |= PLLE_SS_CNTL_SSCINCINTR(0x20); + value |= PLLE_SS_CNTL_SSCINC(0x01); + value |= PLLE_SS_CNTL_SSCMAX(0x25); + + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value &= ~PLLE_SS_CNTL_SSCBYP; + value &= ~PLLE_SS_CNTL_BYPASS_SS; + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + value &= ~PLLE_SS_CNTL_INTERP_RESET; + writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); + + udelay(1); + + return 0; +} diff --git a/arch/arm/mach-tegra/tegra210/funcmux.c b/arch/arm/mach-tegra/tegra210/funcmux.c new file mode 100644 index 0000000..618d228 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/funcmux.c @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Tegra210 high-level function multiplexing */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> + +int funcmux_select(enum periph_id id, int config) +{ + int bad_config = config != FUNCMUX_DEFAULT; + + switch (id) { + /* + * Add other periph IDs here as needed. + * Note that all pinmux/pads should have already + * been set up in the board pinmux table in + * pinmux-config-<board>.h for all periphs. + * Leave this in for the odd case where a mux + * needs to be changed on-the-fly. + */ + + default: + debug("%s: invalid periph_id %d", __func__, id); + return -1; + } + + if (bad_config) { + debug("%s: invalid config %d for periph_id %d", __func__, + config, id); + return -1; + } + return 0; +} diff --git a/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/arch/arm/mach-tegra/tegra210/xusb-padctl.c new file mode 100644 index 0000000..3c10a96 --- /dev/null +++ b/arch/arm/mach-tegra/tegra210/xusb-padctl.c @@ -0,0 +1,495 @@ +/* + * Copyright (c) 2014-2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#define pr_fmt(fmt) "tegra-xusb-padctl: " fmt + +#include <common.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> + +#include <asm/io.h> + +#include <asm/arch/clock.h> +#include <asm/arch-tegra/xusb-padctl.h> + +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> + +struct tegra_xusb_phy_ops { + int (*prepare)(struct tegra_xusb_phy *phy); + int (*enable)(struct tegra_xusb_phy *phy); + int (*disable)(struct tegra_xusb_phy *phy); + int (*unprepare)(struct tegra_xusb_phy *phy); +}; + +struct tegra_xusb_phy { + const struct tegra_xusb_phy_ops *ops; + + struct tegra_xusb_padctl *padctl; +}; + +struct tegra_xusb_padctl { + struct fdt_resource regs; + + unsigned int enable; + + struct tegra_xusb_phy phys[2]; +}; + +static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl, + unsigned long offset) +{ + u32 value = readl(padctl->regs.start + offset); + debug("padctl: %08lx > %08x\n", offset, value); + return value; +} + +static inline void padctl_writel(struct tegra_xusb_padctl *padctl, + u32 value, unsigned long offset) +{ + debug("padctl: %08lx < %08x\n", offset, value); + writel(value, padctl->regs.start + offset); +} + +#define XUSB_PADCTL_ELPG_PROGRAM 0x024 +#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 31) +#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30) +#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 29) + +static int tegra_xusb_padctl_enable(struct tegra_xusb_padctl *padctl) +{ + u32 value; + + if (padctl->enable++ > 0) + return 0; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + return 0; +} + +static int tegra_xusb_padctl_disable(struct tegra_xusb_padctl *padctl) +{ + u32 value; + + if (padctl->enable == 0) { + error("unbalanced enable/disable"); + return 0; + } + + if (--padctl->enable > 0) + return 0; + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + udelay(100); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM); + value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN; + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM); + + return 0; +} + +static int phy_prepare(struct tegra_xusb_phy *phy) +{ + int err; + + err = tegra_xusb_padctl_enable(phy->padctl); + if (err < 0) + return err; + + reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 0); + + return 0; +} + +static int phy_unprepare(struct tegra_xusb_phy *phy) +{ + reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 1); + + return tegra_xusb_padctl_disable(phy->padctl); +} + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360 +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK (0xff << 20) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(x) (((x) & 0xff) << 20) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_MDIV_MASK (0x3 << 16) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS (1 << 15) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD (1 << 4) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE (1 << 3) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK (0x3 << 1) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP(x) (((x) & 0x3) << 1) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ (1 << 0) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2 0x364 +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL_MASK (0xffffff << 4) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL(x) (((x) & 0xffffff) << 4) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD (1 << 2) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE (1 << 1) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN (1 << 0) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4 0x36c +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_EN (1 << 15) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL_MASK (0x3 << 12) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL(x) (((x) & 0x3) << 12) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLKBUF_EN (1 << 8) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLK_SEL_MASK (0xf << 4) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL5 0x370 +#define XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL_MASK (0xff << 16) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL(x) (((x) & 0xff) << 16) + +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8 0x37c +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE (1 << 31) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD (1 << 15) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN (1 << 13) +#define XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN (1 << 12) + +#define CLK_RST_XUSBIO_PLL_CFG0 0x51c +#define CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE (1 << 24) +#define CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ (1 << 13) +#define CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET (1 << 6) +#define CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL (1 << 2) +#define CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL (1 << 0) + +static int pcie_phy_enable(struct tegra_xusb_phy *phy) +{ + struct tegra_xusb_padctl *padctl = phy->padctl; + unsigned long start; + u32 value; + + debug("> %s(phy=%p)\n", __func__, phy); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_CTRL(0x136); + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL5); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL5_DCO_CTRL(0x2a); + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL5); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL_MASK; + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLK_SEL_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_SEL(2); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_TXCLKREF_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_MDIV_MASK; + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(25); + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + udelay(1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL4_REFCLKBUF_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL4); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + debug(" waiting for calibration\n"); + + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + debug(" waiting for calibration to stop\n"); + + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + if ((value & XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_DONE) == 0) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + debug(" waiting for PLL to lock...\n"); + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL1_LOCKDET_STATUS) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN; + value |= XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + debug(" waiting for register calibration...\n"); + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + if (value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + debug(" waiting for register calibration to stop...\n"); + start = get_timer(0); + + while (get_timer(start) < 250) { + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + if ((value & XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_DONE) == 0) + break; + } + + debug(" done\n"); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + value &= ~CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL; + value &= ~CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL; + value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET; + value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ; + writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2); + + value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD; + padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8); + + udelay(1); + + value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + value |= CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE; + writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0); + + debug("< %s()\n", __func__); + return 0; +} + +static int pcie_phy_disable(struct tegra_xusb_phy *phy) +{ + return 0; +} + +static const struct tegra_xusb_phy_ops pcie_phy_ops = { + .prepare = phy_prepare, + .enable = pcie_phy_enable, + .disable = pcie_phy_disable, + .unprepare = phy_unprepare, +}; + +static struct tegra_xusb_padctl *padctl = &(struct tegra_xusb_padctl) { + .phys = { + [0] = { + .ops = &pcie_phy_ops, + }, + }, +}; + +static int tegra_xusb_padctl_parse_dt(struct tegra_xusb_padctl *padctl, + const void *fdt, int node) +{ + int err; + + err = fdt_get_resource(fdt, node, "reg", 0, &padctl->regs); + if (err < 0) { + error("registers not found"); + return err; + } + + debug("regs: %pa-%pa\n", &padctl->regs.start, + &padctl->regs.end); + + return 0; +} + +static int process_nodes(const void *fdt, int nodes[], unsigned int count) +{ + unsigned int i; + int err; + + debug("> %s(fdt=%p, nodes=%p, count=%u)\n", __func__, fdt, nodes, + count); + + for (i = 0; i < count; i++) { + enum fdt_compat_id id; + + if (!fdtdec_get_is_enabled(fdt, nodes[i])) + continue; + + id = fdtdec_lookup(fdt, nodes[i]); + switch (id) { + case COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL: + case COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL: + break; + + default: + error("unsupported compatible: %s", + fdtdec_get_compatible(id)); + continue; + } + + err = tegra_xusb_padctl_parse_dt(padctl, fdt, nodes[i]); + if (err < 0) { + error("failed to parse DT: %d", + err); + continue; + } + + /* deassert XUSB padctl reset */ + reset_set_enable(PERIPH_ID_XUSB_PADCTL, 0); + + /* only a single instance is supported */ + break; + } + + debug("< %s()\n", __func__); + return 0; +} + +struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type) +{ + struct tegra_xusb_phy *phy = NULL; + + switch (type) { + case TEGRA_XUSB_PADCTL_PCIE: + phy = &padctl->phys[0]; + phy->padctl = padctl; + break; + } + + return phy; +} + +int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->prepare) + return phy->ops->prepare(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->enable) + return phy->ops->enable(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->disable) + return phy->ops->disable(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +int tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy) +{ + if (phy && phy->ops && phy->ops->unprepare) + return phy->ops->unprepare(phy); + + return phy ? -ENOSYS : -EINVAL; +} + +void tegra_xusb_padctl_init(const void *fdt) +{ + int count, nodes[1]; + + debug("> %s(fdt=%p)\n", __func__, fdt); + + count = fdtdec_find_aliases_for_id(fdt, "padctl", + COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL, + nodes, ARRAY_SIZE(nodes)); + if (process_nodes(fdt, nodes, count)) + return; + + count = fdtdec_find_aliases_for_id(fdt, "padctl", + COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL, + nodes, ARRAY_SIZE(nodes)); + if (process_nodes(fdt, nodes, count)) + return; + + debug("< %s()\n", __func__); +} diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index feda49e..7b49ad3 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -10,13 +10,17 @@ choice prompt "UniPhier SoC select" default MACH_PH1_PRO4 -config MACH_PH1_PRO4 - bool "PH1-Pro4" +config MACH_PH1_SLD3 + bool "PH1-sLD3" select UNIPHIER_SMP config MACH_PH1_LD4 bool "PH1-LD4" +config MACH_PH1_PRO4 + bool "PH1-Pro4" + select UNIPHIER_SMP + config MACH_PH1_SLD8 bool "PH1-sLD8" @@ -64,11 +68,11 @@ choice config DDR_FREQ_1600 bool "DDR3 1600" - depends on MACH_PH1_PRO4 || MACH_PH1_LD4 + depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4 config DDR_FREQ_1333 bool "DDR3 1333" - depends on MACH_PH1_LD4 || MACH_PH1_SLD8 + depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8 endchoice diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 24591d6..103db6d 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -32,6 +32,7 @@ obj-y += timer.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ +obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ +obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ +obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ +obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index 20878e2..df50294 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -1,7 +1,7 @@ /* * UniPhier SC (System Control) block registers * - * Copyright (C) 2011-2015 Panasonic Corporation + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,7 +9,11 @@ #ifndef ARCH_SC_REGS_H #define ARCH_SC_REGS_H +#if defined(CONFIG_MACH_PH1_SLD3) +#define SC_BASE_ADDR 0xf1840000 +#else #define SC_BASE_ADDR 0x61840000 +#endif #define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) #define SC_DPLLCTRL_SSC_EN (0x1 << 31) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index a65f058..43a6c35 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -55,11 +55,12 @@ #if defined(CONFIG_MACH_PH1_PRO4) # define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ + defined(CONFIG_MACH_PH1_SLD8) # define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) #endif -#if defined(CONFIG_MACH_PH1_PRO4) +#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4) #define SG_PINSELBITS 4 #elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) #define SG_PINSELBITS 8 diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile new file mode 100644 index 0000000..f3f7ad4 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile @@ -0,0 +1,16 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o +obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ + early_pinctrl.o pll_spectrum.o umc_init.o +obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o +obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_SPL_DM) += platdevice.o +else +obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o +endif + +obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c new file mode 100644 index 0000000..ccc6897 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/bcu-regs.h> + +#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) + +void bcu_init(void) +{ + int shift; + + writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ + /* + * 0xe0000000-0xefffffff: Ex-bus + * 0xf0000000-0xfbffffff: ASM bus + * 0xfc000000-0xffffffff: OCM bus + */ + writel(0x24440000, BCSCR5); + + /* Specify DDR channel */ + shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c new file mode 100644 index 0000000..40000af --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sg-regs.h> +#include <mach/sbc-regs.h> + +struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "External Master"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (3.3V, Boot Oparation)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (1.8V, Boot Oparation)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (3.3V, Normal)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (1.8V, Normal)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + { /* sentinel */ } +}; + +int get_boot_mode_sel(void) +{ + return readl(SG_PINMON0) & 0x3f; +} + +u32 spl_boot_device(void) +{ + int boot_mode; + + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c new file mode 100644 index 0000000..3a3dab7 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c @@ -0,0 +1 @@ +#include "../ph1-pro4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c new file mode 100644 index 0000000..d7ef16b --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c @@ -0,0 +1 @@ +#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c new file mode 100644 index 0000000..f113e65 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/sg-regs.h> + +void early_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(63, 0); /* RXD0 */ + sg_set_pinsel(64, 1); /* TXD0 */ + + sg_set_pinsel(65, 0); /* RXD1 */ + sg_set_pinsel(66, 1); /* TXD1 */ + + sg_set_pinsel(96, 2); /* RXD2 */ + sg_set_pinsel(102, 2); /* TXD2 */ +#endif +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S new file mode 100644 index 0000000..9d1fd2c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S @@ -0,0 +1,31 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/linkage.h> +#include <mach/bcu-regs.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> +#include <mach/debug-uart.S> + +ENTRY(setup_lowlevel_debug) + ldr r0, =BCSCR5 + ldr r1, =0x24440000 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + init_debug_uart r0, r1, r2 + + set_pinsel 63, 0, r0, r1 + set_pinsel 64, 1, r0, r1 + + mov pc, lr +ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/memconf.c b/arch/arm/mach-uniphier/ph1-sld3/memconf.c new file mode 100644 index 0000000..553a9e3 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/memconf.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/types.h> +#include <linux/sizes.h> +#include <mach/sg-regs.h> + +static inline u32 sg_memconf_val_ch2(unsigned long size, int num) +{ + int size_mb = size / num; + u32 ret; + + switch (size_mb) { + case SZ_64M: + ret = SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + ret = SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + ret = SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + ret = SG_MEMCONF_CH2_SZ_512M; + break; + default: + BUG(); + break; + } + + switch (num) { + case 1: + ret |= SG_MEMCONF_CH2_NUM_1; + break; + case 2: + ret |= SG_MEMCONF_CH2_NUM_2; + break; + default: + BUG(); + break; + } + return ret; +} + +u32 memconf_additional_val(void) +{ + return sg_memconf_val_ch2(CONFIG_SDRAM2_SIZE, CONFIG_DDR_NUM_CH2); +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c new file mode 100644 index 0000000..5ecbe4c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/sg-regs.h> + +void pin_init(void) +{ +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(13, 0); /* USB0OC */ + sg_set_pinsel(14, 1); /* USB0VBUS */ + + sg_set_pinsel(15, 0); /* USB1OC */ + sg_set_pinsel(16, 1); /* USB1VBUS */ + + sg_set_pinsel(17, 0); /* USB2OC */ + sg_set_pinsel(18, 1); /* USB2VBUS */ + + sg_set_pinsel(19, 0); /* USB3OC */ + sg_set_pinsel(20, 1); /* USB3VBUS */ +#endif +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/platdevice.c b/arch/arm/mach-uniphier/ph1-sld3/platdevice.c new file mode 100644 index 0000000..6521067 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/platdevice.c @@ -0,0 +1 @@ +#include "../ph1-ld4/platdevice.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c b/arch/arm/mach-uniphier/ph1-sld3/pll_init.c new file mode 100644 index 0000000..ebd1c31 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/pll_init.c @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void pll_init(void) +{ + /* add pll init code here */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c new file mode 100644 index 0000000..fcf2ad2 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/sc-regs.h> + +void enable_dpll_ssc(void) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c new file mode 100644 index 0000000..d66f89e --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +void sbc_init(void) +{ + /* only address/data multiplex mode is supported */ + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * + * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank + * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x03efffff: memory bank (31MB) + * 0x03f00000-0x03ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c new file mode 100644 index 0000000..f5e2446 --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +void sbc_init(void) +{ + /* only address/data multiplex mode is supported */ + + /* XECS0 : boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); + + /* XECS1 : sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); + + /* XECS2 : peripherals */ + writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); + writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); + writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); + + /* base address regsiters */ + writel(0x0000bc01, SBBASE0); + writel(0x0400bc01, SBBASE1); + writel(0x0800bf01, SBBASE2); + + sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c new file mode 100644 index 0000000..ca3cb9c --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void sg_init(void) +{ +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c new file mode 100644 index 0000000..91ee3de --- /dev/null +++ b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +int umc_init(void) +{ + /* add UMC init code here */ + printf("Implement memory init code\n"); + + return 0; +} diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c index d2885dc..6444be8 100644 --- a/arch/arm/mach-zynq/clk.c +++ b/arch/arm/mach-zynq/clk.c @@ -48,11 +48,11 @@ DECLARE_GLOBAL_DATA_PTR; struct clk; /** - * struct clk_ops: + * struct zynq_clk_ops: * @set_rate: Function pointer to set_rate() implementation * @get_rate: Function pointer to get_rate() implementation */ -struct clk_ops { +struct zynq_clk_ops { int (*set_rate)(struct clk *clk, unsigned long rate); unsigned long (*get_rate)(struct clk *clk); }; @@ -72,7 +72,7 @@ struct clk { enum zynq_clk parent; unsigned int flags; u32 *reg; - struct clk_ops ops; + struct zynq_clk_ops ops; }; #define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3b3f446..18451d3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -22,9 +22,11 @@ config MPC8260 config MPC83xx bool "MPC83xx" + select CREATE_ARCH_SYMLINK config MPC85xx bool "MPC85xx" + select CREATE_ARCH_SYMLINK config MPC86xx bool "MPC86xx" @@ -34,6 +36,7 @@ config 8xx config 4xx bool "PPC4xx" + select CREATE_ARCH_SYMLINK endchoice diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index e61d8e0..a70fb71 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1052,6 +1052,17 @@ create_init_ram_area: CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 + +#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_SECURE_BOOT) + /* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE + * to L3 Address configured by PBL for ISBC code + */ + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main diff --git a/arch/powerpc/cpu/mpc85xx/t1024_ids.c b/arch/powerpc/cpu/mpc85xx/t1024_ids.c index 132689b..8a1092e 100644 --- a/arch/powerpc/cpu/mpc85xx/t1024_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1024_ids.c @@ -51,11 +51,10 @@ int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); #ifdef CONFIG_SYS_DPAA_FMAN struct liodn_id_table fman1_liodn_tbl[] = { - SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_10G_TYPE2_LIODN(1, 0, 88), SET_FMAN_RX_1G_LIODN(1, 1, 89), SET_FMAN_RX_1G_LIODN(1, 2, 90), SET_FMAN_RX_1G_LIODN(1, 3, 91), - SET_FMAN_RX_10G_LIODN(1, 0, 94), }; int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index 74c4c81..7b43b28 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -214,8 +214,8 @@ static const struct serdes_config serdes3_cfg_tbl[] = { {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, {5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, - {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, - {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, + {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, @@ -266,37 +266,30 @@ static const struct serdes_config serdes4_cfg_tbl[] = { #elif defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080) static const struct serdes_config serdes1_cfg_tbl[] = { /* SerDes 1 */ - {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, - XAUI_FM1_MAC9, XAUI_FM1_MAC9, + {1, {NONE, NONE, NONE, NONE, XAUI_FM1_MAC10, XAUI_FM1_MAC10, XAUI_FM1_MAC10, XAUI_FM1_MAC10} }, - {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, - HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + {2, {NONE, NONE, NONE, NONE, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, - {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, - HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + {4, {NONE, NONE, NONE, NONE, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, - {27, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {27, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {28, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {35, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {35, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, - SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + {36, {NONE, NONE, NONE, NONE, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, - {37, {NONE, NONE, QSGMII_FM1_B, NONE, + {37, {NONE, NONE, NONE, NONE, NONE, NONE, QSGMII_FM1_A, NONE} }, - {38, {NONE, NONE, QSGMII_FM1_B, NONE, + {38, {NONE, NONE, NONE, NONE, NONE, NONE, QSGMII_FM1_A, NONE} }, {} }; @@ -363,45 +356,45 @@ static const struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, {37, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {38, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {39, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {45, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {47, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, QSGMII_FM1_A, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {49, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {51, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {53, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, NONE, NONE} }, + NONE, NONE, QSGMII_FM2_A, NONE} }, {55, {NONE, XFI_FM1_MAC10, XFI_FM2_MAC10, NONE, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, @@ -424,51 +417,51 @@ static const struct serdes_config serdes3_cfg_tbl[] = { {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, {5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, - {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, - {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, + {7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, - {11, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {11, {NONE, NONE, NONE, NONE, PCIE2, PCIE2, PCIE2, PCIE2} }, - {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {12, {NONE, NONE, NONE, NONE, PCIE2, PCIE2, PCIE2, PCIE2} }, {13, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2} }, {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, PCIE2, PCIE2, PCIE2, PCIE2} }, - {15, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {15, {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1} }, - {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {16, {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1} }, - {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + {17, {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1} }, {18, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, SRIO1, SRIO1, SRIO1, SRIO1} }, {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, - NONE, NONE, NONE, NONE} }, + SRIO1, SRIO1, SRIO1, SRIO1} }, {} }; static const struct serdes_config serdes4_cfg_tbl[] = { /* SerDes 4 */ - {3, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, - {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, - {5, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {7, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, - {9, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, - {10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, - {11, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, - {12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, - {13, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {15, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, - {18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} }, + {3, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} }, + {4, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} }, + {5, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {6, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {7, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {8, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} }, + {9, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} }, + {10, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} }, + {11, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} }, + {12, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} }, + {13, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {14, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {15, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {16, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} }, + {18, {NONE, NONE, NONE, NONE, AURORA, AURORA, AURORA, AURORA} }, {} } ; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 9d56bc1..7a5487b 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -334,7 +334,7 @@ #elif defined(CONFIG_P1025) #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_LAWS 12 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM @@ -806,6 +806,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 +#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 811f034..6206bee 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -145,6 +145,12 @@ extern void fdt_fixup_liodn(void *blob); FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \ CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET) \ +/* enetNum is 0, 1, 2... so we + 8 for type-2 10g to get to HW Port ID */ +#define SET_FMAN_RX_10G_TYPE2_LIODN(fmNum, enetNum, liodn) \ + SET_LIODN_ENTRY_1("fsl,fman-port-10g-rx", liodn, \ + FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \ + CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET) \ + /* * handle both old and new versioned SEC properties: * "fsl,secX.Y" became "fsl,sec-vX.Y" during development diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 8f794ef..d57bb55 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -37,7 +37,9 @@ defined(CONFIG_T2080QDS) || \ defined(CONFIG_T2080RDB) || \ defined(CONFIG_T1040QDS) || \ + defined(CONFIG_T104xD4QDS) || \ defined(CONFIG_T104xRDB) || \ + defined(CONFIG_T104xD4RDB) || \ defined(CONFIG_PPC_T1023) || \ defined(CONFIG_PPC_T1024) #define CONFIG_SYS_CPC_REINIT_F @@ -46,6 +48,11 @@ #define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 #endif +#if defined(CONFIG_RAMBOOT_PBL) +#undef CONFIG_SYS_INIT_L3_ADDR +#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 +#endif + #if defined(CONFIG_C29XPCIE) #define CONFIG_KEY_REVOCATION #endif @@ -68,6 +75,18 @@ #endif #ifndef CONFIG_FIT_SIGNATURE +/* If Boot Script is not on NOR and is required to be copied on RAM */ +#ifdef CONFIG_BOOTSCRIPT_COPY_RAM +#define CONFIG_BS_HDR_ADDR_RAM 0x00010000 +#define CONFIG_BS_HDR_ADDR_FLASH 0x00800000 +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_ADDR_RAM 0x00012000 +#define CONFIG_BS_ADDR_FLASH 0x00802000 +#define CONFIG_BS_SIZE 0x00001000 + +#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM +#else + /* The bootscript header address is different for B4860 because the NOR * mapping is different on B4 due to reduced NOR size. */ @@ -83,6 +102,8 @@ #define CONFIG_BOOTSCRIPT_HDR_ADDR 0xee020000 #endif +#endif + #include <config_fsl_secboot.h> #endif diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c index e6ddb17..3a7f5a0 100644 --- a/arch/sandbox/cpu/cpu.c +++ b/arch/sandbox/cpu/cpu.c @@ -20,7 +20,7 @@ static struct udevice *map_dev; unsigned long map_len; #endif -void reset_cpu(ulong ignored) +void sandbox_exit(void) { /* Do this here while it still has an effect */ os_fd_restore(); @@ -34,13 +34,6 @@ void reset_cpu(ulong ignored) os_exit(0); } -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - reset_cpu(0); - - return 0; -} - /* delay x useconds */ void __udelay(unsigned long usec) { diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c index cae731c..7e5d03e 100644 --- a/arch/sandbox/cpu/state.c +++ b/arch/sandbox/cpu/state.c @@ -345,6 +345,10 @@ int state_init(void) state->ram_buf = os_malloc(state->ram_size); assert(state->ram_buf); + /* No reset yet, so mark it as such. Always allow power reset */ + state->last_reset = RESET_COUNT; + state->reset_allowed[RESET_POWER] = true; + /* * Example of how to use GPIOs: * diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index c25614a..c948df8 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -4,7 +4,7 @@ model = "sandbox"; compatible = "sandbox"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; aliases { console = &uart0; @@ -28,7 +28,7 @@ }; a-test { - reg = <0>; + reg = <0 1>; compatible = "denx,u-boot-fdt-test"; ping-expect = <0>; ping-add = <0>; @@ -41,16 +41,16 @@ }; junk { - reg = <1>; + reg = <1 1>; compatible = "not,compatible"; }; no-compatible { - reg = <2>; + reg = <2 1>; }; b-test { - reg = <3>; + reg = <3 1>; compatible = "denx,u-boot-fdt-test"; ping-expect = <3>; ping-add = <3>; @@ -60,7 +60,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "denx,u-boot-test-bus"; - reg = <3>; + reg = <3 1>; ping-expect = <4>; ping-add = <4>; c-test@5 { @@ -84,14 +84,14 @@ }; d-test { - reg = <3>; + reg = <3 1>; ping-expect = <6>; ping-add = <6>; compatible = "google,another-fdt-test"; }; e-test { - reg = <3>; + reg = <3 1>; ping-expect = <6>; ping-add = <6>; compatible = "google,another-fdt-test"; @@ -105,6 +105,10 @@ compatible = "denx,u-boot-fdt-test"; }; + clk@0 { + compatible = "sandbox,clk"; + }; + eth@10002000 { compatible = "sandbox,eth"; reg = <0x10002000 0x1000>; @@ -142,7 +146,7 @@ i2c@0 { #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0 1>; compatible = "sandbox,i2c"; clock-frequency = <100000>; eeprom@2c { @@ -176,6 +180,24 @@ }; }; + leds { + compatible = "gpio-leds"; + + iracibble { + gpios = <&gpio_a 1 0>; + label = "sandbox:red"; + }; + + martinet { + gpios = <&gpio_a 2 0>; + label = "sandbox:green"; + }; + }; + + mmc { + compatible = "sandbox,mmc"; + }; + pci: pci-controller { compatible = "sandbox,pci"; device_type = "pci"; @@ -192,10 +214,22 @@ }; }; + ram { + compatible = "sandbox,ram"; + }; + + reset@0 { + compatible = "sandbox,warm-reset"; + }; + + reset@1 { + compatible = "sandbox,reset"; + }; + spi@0 { #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0 1>; compatible = "sandbox,spi"; cs-gpios = <0>, <&gpio_a 0>; spi.bin@0 { @@ -206,6 +240,19 @@ }; }; + syscon@0 { + compatible = "sandbox,syscon0"; + reg = <0x10 4>; + }; + + syscon@1 { + compatible = "sandbox,syscon1"; + reg = <0x20 5 + 0x28 6 + 0x30 7 + 0x38 8>; + }; + uart0: serial { compatible = "sandbox,serial"; u-boot,dm-pre-reloc; diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h index a57480a..2bd28f6 100644 --- a/arch/sandbox/include/asm/state.h +++ b/arch/sandbox/include/asm/state.h @@ -7,6 +7,7 @@ #define __SANDBOX_STATE_H #include <config.h> +#include <reset.h> #include <stdbool.h> #include <linux/stringify.h> @@ -59,6 +60,8 @@ struct sandbox_state { bool write_state; /* Write sandbox state on exit */ bool ignore_missing_state_on_read; /* No error if state missing */ bool show_lcd; /* Show LCD on start-up */ + enum reset_t last_reset; /* Last reset type */ + bool reset_allowed[RESET_COUNT]; /* Allowed reset types */ enum state_terminal_raw term_raw; /* Terminal raw/cooked */ /* Pointer to information for each SPI bus/cs */ diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h index 91a5c79..d3c7851 100644 --- a/arch/sandbox/include/asm/test.h +++ b/arch/sandbox/include/asm/test.h @@ -17,6 +17,25 @@ #define SANDBOX_PCI_CLASS_CODE PCI_CLASS_CODE_COMM #define SANDBOX_PCI_CLASS_SUB_CODE PCI_CLASS_SUB_CODE_COMM_SERIAL +#define SANDBOX_CLK_RATE 32768 + +enum { + PERIPH_ID_FIRST = 0, + PERIPH_ID_SPI = PERIPH_ID_FIRST, + PERIPH_ID_I2C, + PERIPH_ID_PCI, + + PERIPH_ID_COUNT, +}; + +/* System controller driver data */ +enum { + SYSCON0 = 32, + SYSCON1, + + SYSCON_COUNT +}; + /** * sandbox_i2c_set_test_mode() - set test mode for running unit tests * diff --git a/arch/sandbox/include/asm/u-boot-sandbox.h b/arch/sandbox/include/asm/u-boot-sandbox.h index da87cc3..2f3c3f9 100644 --- a/arch/sandbox/include/asm/u-boot-sandbox.h +++ b/arch/sandbox/include/asm/u-boot-sandbox.h @@ -83,4 +83,7 @@ void sandbox_set_enable_pci_map(int enable); */ int sandbox_read_fdt_from_file(void); +/* Exit sandbox (quit U-Boot) */ +void sandbox_exit(void); + #endif /* _U_BOOT_SANDBOX_H_ */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cbbaa4f..e8968a7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -369,4 +369,14 @@ config PCIE_ECAM_BASE assigned to PCI devices - i.e. the memory and prefetch regions, as passed to pci_set_region(). +config PCIE_ECAM_SIZE + hex + default 0x10000000 + help + This is the size of memory-mapped address of PCI configuration space, + which is only available through the Enhanced Configuration Access + Mechanism (ECAM) with PCI Express. Each bus consumes 1 MiB memory, + so a default 0x10000000 size covers all of the 256 buses which is the + maximum number of PCI buses as defined by the PCI specification. + endmenu diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index af927b9..b9134cf 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -363,13 +363,26 @@ int x86_cpu_init_f(void) mtrr_cap = native_read_msr(MTRR_CAP_MSR); if (mtrr_cap & MTRR_CAP_FIX) { /* Mark the VGA RAM area as uncacheable */ - native_write_msr(MTRR_FIX_16K_A0000_MSR, 0, 0); - - /* Mark the PCI ROM area as uncacheable */ - native_write_msr(MTRR_FIX_4K_C0000_MSR, 0, 0); - native_write_msr(MTRR_FIX_4K_C8000_MSR, 0, 0); - native_write_msr(MTRR_FIX_4K_D0000_MSR, 0, 0); - native_write_msr(MTRR_FIX_4K_D8000_MSR, 0, 0); + native_write_msr(MTRR_FIX_16K_A0000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE), + MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); + + /* + * Mark the PCI ROM area as cacheable to improve ROM + * execution performance. + */ + native_write_msr(MTRR_FIX_4K_C0000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + native_write_msr(MTRR_FIX_4K_C8000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + native_write_msr(MTRR_FIX_4K_D0000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + native_write_msr(MTRR_FIX_4K_D8000_MSR, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK), + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); /* Enable the fixed range MTRRs */ msr_setbits_64(MTRR_DEF_TYPE_MSR, MTRR_DEF_TYPE_FIX_EN); @@ -683,6 +696,15 @@ __weak int x86_init_cpus(void) #ifdef CONFIG_SMP debug("Init additional CPUs\n"); x86_mp_init(); +#else + struct udevice *dev; + + /* + * This causes the cpu-x86 driver to be probed. + * We don't check return value here as we want to allow boards + * which have not been converted to use cpu uclass driver to boot. + */ + uclass_first_device(UCLASS_CPU, &dev); #endif return 0; diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c index c777d36..853c82f 100644 --- a/arch/x86/cpu/interrupts.c +++ b/arch/x86/cpu/interrupts.c @@ -32,14 +32,76 @@ DECLARE_GLOBAL_DATA_PTR; "pushl $"#x"\n" \ "jmp irq_common_entry\n" +static char *exceptions[] = { + "Divide Error", + "Debug", + "NMI Interrupt", + "Breakpoint", + "Overflow", + "BOUND Range Exceeded", + "Invalid Opcode (Undefined Opcode)", + "Device Not Avaiable (No Math Coprocessor)", + "Double Fault", + "Coprocessor Segment Overrun", + "Invalid TSS", + "Segment Not Present", + "Stack Segment Fault", + "Gerneral Protection", + "Page Fault", + "Reserved", + "x87 FPU Floating-Point Error", + "Alignment Check", + "Machine Check", + "SIMD Floating-Point Exception", + "Virtualization Exception", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved", + "Reserved" +}; + static void dump_regs(struct irq_regs *regs) { + unsigned long cs, eip, eflags; unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; unsigned long d0, d1, d2, d3, d6, d7; unsigned long sp; + /* + * Some exceptions cause an error code to be saved on the current stack + * after the EIP value. We should extract CS/EIP/EFLAGS from different + * position on the stack based on the exception number. + */ + switch (regs->irq_id) { + case EXC_DF: + case EXC_TS: + case EXC_NP: + case EXC_SS: + case EXC_GP: + case EXC_PF: + case EXC_AC: + cs = regs->context.ctx2.xcs; + eip = regs->context.ctx2.eip; + eflags = regs->context.ctx2.eflags; + /* We should fix up the ESP due to error code */ + regs->esp += 4; + break; + default: + cs = regs->context.ctx1.xcs; + eip = regs->context.ctx1.eip; + eflags = regs->context.ctx1.eflags; + break; + } + printf("EIP: %04x:[<%08lx>] EFLAGS: %08lx\n", - (u16)regs->xcs, regs->eip, regs->eflags); + (u16)cs, eip, eflags); printf("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", regs->eax, regs->ebx, regs->ecx, regs->edx); @@ -85,6 +147,13 @@ static void dump_regs(struct irq_regs *regs) } } +static void do_exception(struct irq_regs *regs) +{ + printf("%s\n", exceptions[regs->irq_id]); + dump_regs(regs); + hang(); +} + struct idt_entry { u16 base_low; u16 selector; @@ -201,111 +270,10 @@ void irq_llsr(struct irq_regs *regs) * Order Number: 253665-029US, November 2008 * Table 6-1. Exceptions and Interrupts */ - switch (regs->irq_id) { - case 0x00: - printf("Divide Error (Division by zero)\n"); - dump_regs(regs); - hang(); - break; - case 0x01: - printf("Debug Interrupt (Single step)\n"); - dump_regs(regs); - break; - case 0x02: - printf("NMI Interrupt\n"); - dump_regs(regs); - break; - case 0x03: - printf("Breakpoint\n"); - dump_regs(regs); - break; - case 0x04: - printf("Overflow\n"); - dump_regs(regs); - hang(); - break; - case 0x05: - printf("BOUND Range Exceeded\n"); - dump_regs(regs); - hang(); - break; - case 0x06: - printf("Invalid Opcode (UnDefined Opcode)\n"); - dump_regs(regs); - hang(); - break; - case 0x07: - printf("Device Not Available (No Math Coprocessor)\n"); - dump_regs(regs); - hang(); - break; - case 0x08: - printf("Double fault\n"); - dump_regs(regs); - hang(); - break; - case 0x09: - printf("Co-processor segment overrun\n"); - dump_regs(regs); - hang(); - break; - case 0x0a: - printf("Invalid TSS\n"); - dump_regs(regs); - break; - case 0x0b: - printf("Segment Not Present\n"); - dump_regs(regs); - hang(); - break; - case 0x0c: - printf("Stack Segment Fault\n"); - dump_regs(regs); - hang(); - break; - case 0x0d: - printf("General Protection\n"); - dump_regs(regs); - break; - case 0x0e: - printf("Page fault\n"); - dump_regs(regs); - hang(); - break; - case 0x0f: - printf("Floating-Point Error (Math Fault)\n"); - dump_regs(regs); - break; - case 0x10: - printf("Alignment check\n"); - dump_regs(regs); - break; - case 0x11: - printf("Machine Check\n"); - dump_regs(regs); - break; - case 0x12: - printf("SIMD Floating-Point Exception\n"); - dump_regs(regs); - break; - case 0x13: - case 0x14: - case 0x15: - case 0x16: - case 0x17: - case 0x18: - case 0x19: - case 0x1a: - case 0x1b: - case 0x1c: - case 0x1d: - case 0x1e: - case 0x1f: - printf("Reserved Exception\n"); - dump_regs(regs); - break; - - default: + if (regs->irq_id < 32) { + /* Architecture defined exception */ + do_exception(regs); + } else { /* Hardware or User IRQ */ do_irq(regs->irq_id); } diff --git a/arch/x86/cpu/ivybridge/gma.c b/arch/x86/cpu/ivybridge/gma.c index ea169b0..89d4a5e 100644 --- a/arch/x86/cpu/ivybridge/gma.c +++ b/arch/x86/cpu/ivybridge/gma.c @@ -16,7 +16,6 @@ #include <asm/pci.h> #include <asm/arch/pch.h> #include <asm/arch/sandybridge.h> -#include <linux/kconfig.h> struct gt_powermeter { u16 reg; diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c index bc1a0f0..3efd3e8 100644 --- a/arch/x86/cpu/ivybridge/lpc.c +++ b/arch/x86/cpu/ivybridge/lpc.c @@ -252,7 +252,6 @@ static void pch_rtc_init(pci_dev_t dev) /* TODO: Handle power failure */ if (rtc_failed) printf("RTC power failed\n"); - rtc_init(); } /* CougarPoint PCH Power Management init */ diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c index af907c5..7f3b13d 100644 --- a/arch/x86/cpu/ivybridge/sdram.c +++ b/arch/x86/cpu/ivybridge/sdram.c @@ -128,6 +128,14 @@ static int get_mrc_entry(struct udevice **devp, struct fmap_entry *entry) static int read_seed_from_cmos(struct pei_data *pei_data) { u16 c1, c2, checksum, seed_checksum; + struct udevice *dev; + int rcode = 0; + + rcode = uclass_get_device(UCLASS_RTC, 0, &dev); + if (rcode) { + debug("Cannot find RTC: err=%d\n", rcode); + return -ENODEV; + } /* * Read scrambler seeds from CMOS RAM. We don't want to store them in @@ -135,11 +143,11 @@ static int read_seed_from_cmos(struct pei_data *pei_data) * the flash too much. So we store these in CMOS and the large MRC * data in SPI flash. */ - pei_data->scrambler_seed = rtc_read32(CMOS_OFFSET_MRC_SEED); + rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed); debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n", pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); - pei_data->scrambler_seed_s3 = rtc_read32(CMOS_OFFSET_MRC_SEED_S3); + rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3, &pei_data->scrambler_seed_s3); debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n", pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); @@ -150,8 +158,8 @@ static int read_seed_from_cmos(struct pei_data *pei_data) sizeof(u32)); checksum = add_ip_checksums(sizeof(u32), c1, c2); - seed_checksum = rtc_read8(CMOS_OFFSET_MRC_SEED_CHK); - seed_checksum |= rtc_read8(CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; + seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK); + seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; if (checksum != seed_checksum) { debug("%s: invalid seed checksum\n", __func__); @@ -223,13 +231,21 @@ static int build_mrc_data(struct mrc_data_container **datap) static int write_seeds_to_cmos(struct pei_data *pei_data) { u16 c1, c2, checksum; + struct udevice *dev; + int rcode = 0; + + rcode = uclass_get_device(UCLASS_RTC, 0, &dev); + if (rcode) { + debug("Cannot find RTC: err=%d\n", rcode); + return -ENODEV; + } /* Save the MRC seed values to CMOS */ - rtc_write32(CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); + rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n", pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); - rtc_write32(CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); + rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n", pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); @@ -240,8 +256,8 @@ static int write_seeds_to_cmos(struct pei_data *pei_data) sizeof(u32)); checksum = add_ip_checksums(sizeof(u32), c1, c2); - rtc_write8(CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); - rtc_write8(CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); + rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); + rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); return 0; } diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c index c209f15..f8da080 100644 --- a/arch/x86/cpu/pci.c +++ b/arch/x86/cpu/pci.c @@ -152,23 +152,32 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, return 0; } -void pci_assign_irqs(int bus, int device, int func, u8 irq[4]) +void pci_assign_irqs(int bus, int device, u8 irq[4]) { pci_dev_t bdf; + int func; + u16 vendor; u8 pin, line; - bdf = PCI_BDF(bus, device, func); + for (func = 0; func < 8; func++) { + bdf = PCI_BDF(bus, device, func); + vendor = x86_pci_read_config16(bdf, PCI_VENDOR_ID); + if (vendor == 0xffff || vendor == 0x0000) + continue; - pin = x86_pci_read_config8(bdf, PCI_INTERRUPT_PIN); + pin = x86_pci_read_config8(bdf, PCI_INTERRUPT_PIN); - /* PCI spec says all values except 1..4 are reserved */ - if ((pin < 1) || (pin > 4)) - return; + /* PCI spec says all values except 1..4 are reserved */ + if ((pin < 1) || (pin > 4)) + continue; - line = irq[pin - 1]; + line = irq[pin - 1]; + if (!line) + continue; - debug("Assigning IRQ %d to PCI device %d.%x.%d (INT%c)\n", - line, bus, device, func, 'A' + pin - 1); + debug("Assigning IRQ %d to PCI device %d.%x.%d (INT%c)\n", + line, bus, device, func, 'A' + pin - 1); - x86_pci_write_config8(bdf, PCI_INTERRUPT_LINE, line); + x86_pci_write_config8(bdf, PCI_INTERRUPT_LINE, line); + } } diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c index 1a9140b..2e94456 100644 --- a/arch/x86/cpu/qemu/pci.c +++ b/arch/x86/cpu/qemu/pci.c @@ -13,6 +13,8 @@ DECLARE_GLOBAL_DATA_PTR; +static bool i440fx; + void board_pci_setup_hose(struct pci_controller *hose) { hose->first_busno = 0; @@ -50,7 +52,7 @@ void board_pci_setup_hose(struct pci_controller *hose) int board_pci_post_scan(struct pci_controller *hose) { int ret = 0; - u16 device; + u16 device, xbcs; int pam, i; pci_dev_t vga; ulong start; @@ -61,7 +63,8 @@ int board_pci_post_scan(struct pci_controller *hose) * PCI device ID. */ device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID); - pam = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_PAM : Q35_PAM; + i440fx = (device == PCI_DEVICE_ID_INTEL_82441); + pam = i440fx ? I440FX_PAM : Q35_PAM; /* * Initialize Programmable Attribute Map (PAM) Registers @@ -71,7 +74,7 @@ int board_pci_post_scan(struct pci_controller *hose) for (i = 0; i < PAM_NUM; i++) x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW); - if (device == PCI_DEVICE_ID_INTEL_82441) { + if (i440fx) { /* * Enable legacy IDE I/O ports decode * @@ -82,6 +85,15 @@ int board_pci_post_scan(struct pci_controller *hose) */ x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN); x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN); + + /* Enable I/O APIC */ + xbcs = x86_pci_read_config16(PIIX_ISA, XBCS); + xbcs |= APIC_EN; + x86_pci_write_config16(PIIX_ISA, XBCS, xbcs); + } else { + /* Configure PCIe ECAM base address */ + x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR, + CONFIG_PCIE_ECAM_BASE | BAR_EN); } /* @@ -92,10 +104,35 @@ int board_pci_post_scan(struct pci_controller *hose) * board, it shows as device 2, while for Q35 and ICH9 chipset board, * it shows as device 1. */ - vga = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_VGA : Q35_VGA; + vga = i440fx ? I440FX_VGA : Q35_VGA; start = get_timer(0); ret = pci_run_vga_bios(vga, NULL, PCI_ROM_USE_NATIVE); debug("BIOS ran in %lums\n", get_timer(start)); return ret; } + +#ifdef CONFIG_GENERATE_MP_TABLE +int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) +{ + u8 irq; + + if (i440fx) { + /* + * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not + * connected to I/O APIC INTPIN#16-19. Instead they are routed + * to an irq number controled by the PIRQ routing register. + */ + irq = x86_pci_read_config8(PCI_BDF(bus, dev, func), + PCI_INTERRUPT_LINE); + } else { + /* + * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7. + * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11]. + */ + irq = pirq < 8 ? pirq + 16 : pirq + 12; + } + + return irq; +} +#endif diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile index d8761fd..660f967 100644 --- a/arch/x86/cpu/queensbay/Makefile +++ b/arch/x86/cpu/queensbay/Makefile @@ -6,4 +6,3 @@ obj-y += fsp_configs.o obj-y += tnc.o topcliff.o -obj-$(CONFIG_PCI) += tnc_pci.o diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c index d27b2d9..de50893 100644 --- a/arch/x86/cpu/queensbay/tnc.c +++ b/arch/x86/cpu/queensbay/tnc.c @@ -25,7 +25,6 @@ static void unprotect_spi_flash(void) int arch_cpu_init(void) { - struct pci_controller *hose; int ret; post_code(POST_CPU_INIT); @@ -37,10 +36,6 @@ int arch_cpu_init(void) if (ret) return ret; - ret = pci_early_init_hose(&hose); - if (ret) - return ret; - unprotect_spi_flash(); return 0; diff --git a/arch/x86/cpu/queensbay/tnc_pci.c b/arch/x86/cpu/queensbay/tnc_pci.c deleted file mode 100644 index 6c291f9..0000000 --- a/arch/x86/cpu/queensbay/tnc_pci.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <pci.h> -#include <asm/pci.h> -#include <asm/fsp/fsp_support.h> - -DECLARE_GLOBAL_DATA_PTR; - -void board_pci_setup_hose(struct pci_controller *hose) -{ - hose->first_busno = 0; - hose->last_busno = 0; - - /* PCI memory space */ - pci_set_region(hose->regions + 0, - CONFIG_PCI_MEM_BUS, - CONFIG_PCI_MEM_PHYS, - CONFIG_PCI_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 1, - CONFIG_PCI_IO_BUS, - CONFIG_PCI_IO_PHYS, - CONFIG_PCI_IO_SIZE, - PCI_REGION_IO); - - pci_set_region(hose->regions + 2, - CONFIG_PCI_PREF_BUS, - CONFIG_PCI_PREF_PHYS, - CONFIG_PCI_PREF_SIZE, - PCI_REGION_PREFETCH); - - pci_set_region(hose->regions + 3, - 0, - 0, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 4; -} diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts index 7c7034c..ad390bf 100644 --- a/arch/x86/dts/chromebook_link.dts +++ b/arch/x86/dts/chromebook_link.dts @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "Google Link"; diff --git a/arch/x86/dts/chromebox_panther.dts b/arch/x86/dts/chromebox_panther.dts index 4eccefd..84eae3a 100644 --- a/arch/x86/dts/chromebox_panther.dts +++ b/arch/x86/dts/chromebox_panther.dts @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "Google Panther"; diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts index 60da1f5..3af9cc3 100644 --- a/arch/x86/dts/crownbay.dts +++ b/arch/x86/dts/crownbay.dts @@ -90,8 +90,12 @@ pci { #address-cells = <3>; #size-cells = <2>; - compatible = "intel,pci"; + compatible = "pci-x86"; device_type = "pci"; + u-boot,dm-pre-reloc; + ranges = <0x02000000 0x0 0x40000000 0x40000000 0 0x80000000 + 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 + 0x01000000 0x0 0x2000 0x2000 0 0xe000>; pcie@17,0 { #address-cells = <3>; diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts index 2ba081e..d77ff8a 100644 --- a/arch/x86/dts/galileo.dts +++ b/arch/x86/dts/galileo.dts @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-router/intel-irq.h> /include/ "skeleton.dtsi" +/include/ "rtc.dtsi" / { model = "Intel Galileo"; diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index 0e59b18..9527233 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -10,6 +10,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "Intel Minnowboard Max"; diff --git a/arch/x86/dts/qemu-x86_i440fx.dts b/arch/x86/dts/qemu-x86_i440fx.dts index 557428a..c26c71b 100644 --- a/arch/x86/dts/qemu-x86_i440fx.dts +++ b/arch/x86/dts/qemu-x86_i440fx.dts @@ -10,6 +10,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "QEMU x86 (I440FX)"; @@ -23,6 +24,18 @@ stdout-path = "/serial"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "cpu-x86"; + reg = <0>; + intel,apic-id = <0>; + }; + }; + pci { compatible = "pci-x86"; #address-cells = <3>; diff --git a/arch/x86/dts/qemu-x86_q35.dts b/arch/x86/dts/qemu-x86_q35.dts index c259f2a..2e785fa 100644 --- a/arch/x86/dts/qemu-x86_q35.dts +++ b/arch/x86/dts/qemu-x86_q35.dts @@ -20,6 +20,7 @@ /include/ "skeleton.dtsi" /include/ "serial.dtsi" +/include/ "rtc.dtsi" / { model = "QEMU x86 (Q35)"; @@ -34,6 +35,18 @@ stdout-path = "/serial"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "cpu-x86"; + reg = <0>; + intel,apic-id = <0>; + }; + }; + pci { compatible = "pci-x86"; #address-cells = <3>; diff --git a/arch/x86/dts/rtc.dtsi b/arch/x86/dts/rtc.dtsi index 93dacd7..1797e04 100644 --- a/arch/x86/dts/rtc.dtsi +++ b/arch/x86/dts/rtc.dtsi @@ -1,6 +1,7 @@ / { rtc { compatible = "motorola,mc146818"; + u-boot,dm-pre-reloc; reg = <0x70 2>; }; }; diff --git a/arch/x86/include/asm/arch-qemu/qemu.h b/arch/x86/include/asm/arch-qemu/qemu.h index 5cbffff..b67d342 100644 --- a/arch/x86/include/asm/arch-qemu/qemu.h +++ b/arch/x86/include/asm/arch-qemu/qemu.h @@ -13,10 +13,18 @@ #define PAM_NUM 7 #define PAM_RW 0x33 +/* X-Bus Chip Select Register */ +#define XBCS 0x4e +#define APIC_EN (1 << 8) + /* IDE Timing Register */ #define IDE0_TIM 0x40 #define IDE1_TIM 0x42 -#define IDE_DECODE_EN 0x8000 +#define IDE_DECODE_EN (1 << 15) + +/* PCIe ECAM Base Address Register */ +#define PCIEX_BAR 0x60 +#define BAR_EN (1 << 0) /* I/O Ports */ #define CMOS_ADDR_PORT 0x70 diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h index 0a75f89..fcd766b 100644 --- a/arch/x86/include/asm/interrupt.h +++ b/arch/x86/include/asm/interrupt.h @@ -13,13 +13,33 @@ #include <asm/types.h> +/* Architecture defined exceptions */ +enum x86_exception { + EXC_DE = 0, + EXC_DB, + EXC_NMI, + EXC_BP, + EXC_OF, + EXC_BR, + EXC_UD, + EXC_NM, + EXC_DF, + EXC_CSO, + EXC_TS, + EXC_NP, + EXC_SS, + EXC_GP, + EXC_PF, + EXC_MF = 16, + EXC_AC, + EXC_MC, + EXC_XM, + EXC_VE +}; + /* arch/x86/cpu/interrupts.c */ void set_vector(u8 intnum, void *routine); -/* arch/x86/lib/interrupts.c */ -void disable_irq(int irq); -void enable_irq(int irq); - /* Architecture specific functions */ void mask_irq(int irq); void unmask_irq(int irq); diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index efa9231..ad8eba9 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -432,6 +432,23 @@ void mp_write_compat_address_space(struct mp_config_table *mc, int busid, u32 mptable_finalize(struct mp_config_table *mc); /** + * mp_determine_pci_dstirq() - Determine PCI device's int pin on the I/O APIC + * + * This determines a PCI device's interrupt pin number on the I/O APIC. + * + * This can be implemented by platform codes to handle specifal cases, which + * do not conform to the normal chipset/board design where PIRQ[A-H] are mapped + * directly to I/O APIC INTPIN#16-23. + * + * @bus: bus number of the pci device + * @dev: device number of the pci device + * @func: function number of the pci device + * @pirq: PIRQ number the PCI device's interrupt pin is routed to + * @return: interrupt pin number on the I/O APIC + */ +int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq); + +/** * write_mp_table() - Write MP table * * This writes MP table at a given address. diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h index 70762ee..f9b30f6 100644 --- a/arch/x86/include/asm/mtrr.h +++ b/arch/x86/include/asm/mtrr.h @@ -55,6 +55,8 @@ #define MTRR_FIX_4K_F0000_MSR 0x26e #define MTRR_FIX_4K_F8000_MSR 0x26f +#define MTRR_FIX_TYPE(t) ((t << 24) | (t << 16) | (t << 8) | t) + #if !defined(__ASSEMBLER__) /** diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 56eaa25..f7e968e 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -72,11 +72,10 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, * * @bus: PCI bus number * @device: PCI device number - * @func: PCI function number * @irq: An array of IRQ numbers that are assigned to INTA through * INTD of this PCI device. */ -void pci_assign_irqs(int bus, int device, int func, u8 irq[4]); +void pci_assign_irqs(int bus, int device, u8 irq[4]); #endif /* __ASSEMBLY__ */ diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index a727dbf..3849bc0 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -63,9 +63,19 @@ struct irq_regs { /* Pushed by vector handler (irq_<num>) */ long irq_id; /* Pushed by cpu in response to interrupt */ - long eip; - long xcs; - long eflags; + union { + struct { + long eip; + long xcs; + long eflags; + } ctx1; + struct { + long err; + long eip; + long xcs; + long eflags; + } ctx2; + } context; } __attribute__ ((packed)); /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c index 4c0a7c8..28552fa 100644 --- a/arch/x86/lib/fsp/fsp_dram.c +++ b/arch/x86/lib/fsp/fsp_dram.c @@ -77,5 +77,11 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) num_entries++; } + /* Mark PCIe ECAM address range as reserved */ + entries[num_entries].addr = CONFIG_PCIE_ECAM_BASE; + entries[num_entries].size = CONFIG_PCIE_ECAM_SIZE; + entries[num_entries].type = E820_RESERVED; + num_entries++; + return num_entries; } diff --git a/arch/x86/lib/mpspec.c b/arch/x86/lib/mpspec.c index f16fbcb..f3ad116 100644 --- a/arch/x86/lib/mpspec.c +++ b/arch/x86/lib/mpspec.c @@ -21,6 +21,8 @@ DECLARE_GLOBAL_DATA_PTR; +static bool isa_irq_occupied[16]; + struct mp_config_table *mp_write_floating_table(struct mp_floating_table *mf) { u32 mc; @@ -243,10 +245,18 @@ static void mptable_add_isa_interrupts(struct mp_config_table *mc, int bus_isa, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0, apicid, 2); - for (i = 3; i < 16; i++) + for (i = 3; i < 16; i++) { + /* + * Do not write ISA interrupt entry if it is already occupied + * by the platform devices. + */ + if (isa_irq_occupied[i]) + continue; + mp_write_intsrc(mc, MP_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, i, apicid, i); + } } /* @@ -269,6 +279,13 @@ static bool check_dup_entry(struct mpc_config_intsrc *intsrc_base, return (i == entry_num) ? false : true; } +/* TODO: move this to driver model */ +__weak int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq) +{ + /* PIRQ[A-H] are connected to I/O APIC INTPIN#16-23 */ + return pirq + 16; +} + static int mptable_add_intsrc(struct mp_config_table *mc, int bus_isa, int apicid) { @@ -280,10 +297,6 @@ static int mptable_add_intsrc(struct mp_config_table *mc, const u32 *cell; int i; - /* Legacy Interrupts */ - debug("Writing ISA IRQs\n"); - mptable_add_isa_interrupts(mc, bus_isa, apicid, 0); - /* Get I/O interrupt information from device tree */ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_IRQ_ROUTER); if (node < 0) { @@ -304,28 +317,41 @@ static int mptable_add_intsrc(struct mp_config_table *mc, for (i = 0; i < count; i++) { struct pirq_routing pr; + int bus, dev, func; + int dstirq; pr.bdf = fdt_addr_to_cpu(cell[0]); pr.pin = fdt_addr_to_cpu(cell[1]); pr.pirq = fdt_addr_to_cpu(cell[2]); + bus = PCI_BUS(pr.bdf); + dev = PCI_DEV(pr.bdf); + func = PCI_FUNC(pr.bdf); if (check_dup_entry(intsrc_base, intsrc_entries, - PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), pr.pin)) { + bus, dev, pr.pin)) { debug("found entry for bus %d device %d INT%c, skipping\n", - PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), - 'A' + pr.pin - 1); + bus, dev, 'A' + pr.pin - 1); cell += sizeof(struct pirq_routing) / sizeof(u32); continue; } - /* PIRQ[A-H] are always connected to I/O APIC INTPIN#16-23 */ - mp_write_pci_intsrc(mc, MP_INT, PCI_BUS(pr.bdf), - PCI_DEV(pr.bdf), pr.pin, apicid, - pr.pirq + 16); + dstirq = mp_determine_pci_dstirq(bus, dev, func, pr.pirq); + /* + * For PIRQ which is connected to I/O APIC interrupt pin#0-15, + * mark it as occupied so that we can skip it later. + */ + if (dstirq < 16) + isa_irq_occupied[dstirq] = true; + mp_write_pci_intsrc(mc, MP_INT, bus, dev, pr.pin, + apicid, dstirq); intsrc_entries++; cell += sizeof(struct pirq_routing) / sizeof(u32); } + /* Legacy Interrupts */ + debug("Writing ISA IRQs\n"); + mptable_add_isa_interrupts(mc, bus_isa, apicid, 0); + return 0; } diff --git a/arch/x86/lib/pirq_routing.c b/arch/x86/lib/pirq_routing.c index 7a34dcf..ba41169 100644 --- a/arch/x86/lib/pirq_routing.c +++ b/arch/x86/lib/pirq_routing.c @@ -98,8 +98,7 @@ void pirq_route_irqs(struct irq_info *irq, int num) } /* Bus, device, slots IRQs for {A,B,C,D} */ - pci_assign_irqs(irq->bus, irq->devfn >> 3, irq->devfn & 7, - irq_slot); + pci_assign_irqs(irq->bus, irq->devfn >> 3, irq_slot); irq++; } diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 144471c..a1ec57e 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -61,8 +61,11 @@ __weak unsigned install_e820_map(unsigned max_entries, entries[2].addr = ISA_END_ADDRESS; entries[2].size = gd->ram_size - ISA_END_ADDRESS; entries[2].type = E820_RAM; + entries[3].addr = CONFIG_PCIE_ECAM_BASE; + entries[3].size = CONFIG_PCIE_ECAM_SIZE; + entries[3].type = E820_RESERVED; - return 3; + return 4; } static void build_command_line(char *command_line, int auto_boot) |