summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c17
-rw-r--r--arch/arm/cpu/armv7/Makefile2
-rw-r--r--arch/arm/cpu/armv7/at91/config.mk10
-rw-r--r--arch/arm/cpu/armv7/sunxi/Makefile25
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c111
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock.c25
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock_sun4i.c188
-rw-r--r--arch/arm/cpu/armv7/sunxi/config.mk8
-rw-r--r--arch/arm/cpu/armv7/sunxi/cpu_info.c19
-rw-r--r--arch/arm/cpu/armv7/sunxi/dram.c593
-rw-r--r--arch/arm/cpu/armv7/sunxi/pinmux.c61
-rw-r--r--arch/arm/cpu/armv7/sunxi/start.c1
-rw-r--r--arch/arm/cpu/armv7/sunxi/timer.c113
-rw-r--r--arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds77
-rw-r--r--arch/arm/cpu/armv7/sunxi/u-boot-spl.lds52
-rw-r--r--arch/arm/cpu/armv8/start.S4
-rw-r--r--arch/arm/cpu/at91-common/spl.c39
-rw-r--r--arch/arm/include/asm/arch-at91/at91_pmc.h4
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9x5.h3
-rw-r--r--arch/arm/include/asm/arch-at91/hardware.h2
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock.h29
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun4i.h256
-rw-r--r--arch/arm/include/asm/arch-sunxi/cpu.h122
-rw-r--r--arch/arm/include/asm/arch-sunxi/dram.h179
-rw-r--r--arch/arm/include/asm/arch-sunxi/gpio.h147
-rw-r--r--arch/arm/include/asm/arch-sunxi/mmc.h124
-rw-r--r--arch/arm/include/asm/arch-sunxi/spl.h20
-rw-r--r--arch/arm/include/asm/arch-sunxi/sys_proto.h16
-rw-r--r--arch/arm/include/asm/arch-sunxi/timer.h88
-rw-r--r--arch/arm/include/asm/arch-vf610/imx-regs.h1
30 files changed, 2331 insertions, 5 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
index 7d7725c..0e6c0da 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -165,3 +165,20 @@ void at91_macb_hw_init(void)
#endif
}
#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */
+ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_MCI0, &pmc->pcer);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ab869b1..232118d 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y += cache_v7.o
obj-y += cpu.o
obj-y += syslib.o
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk
new file mode 100644
index 0000000..09eab70
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/config.mk
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+ifdef CONFIG_SPL_BUILD
+ALL-y += boot.bin
+else
+ALL-y += u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
new file mode 100644
index 0000000..a64bfa1
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+obj-y += timer.o
+obj-y += board.o
+obj-y += clock.o
+obj-y += pinmux.o
+obj-$(CONFIG_SUN7I) += clock_sun4i.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += cpu_info.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SUN7I) += dram.o
+ifdef CONFIG_SPL_FEL
+obj-y += start.o
+endif
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
new file mode 100644
index 0000000..49c9448
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <serial.h>
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#endif
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+
+#ifdef CONFIG_SPL_BUILD
+/* Pointer to the global data structure for SPL */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+#endif
+
+int gpio_init(void)
+{
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+ sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+/* do some early init */
+void s_init(void)
+{
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+ /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+ asm volatile(
+ "mrc p15, 0, r0, c1, c0, 1\n"
+ "orr r0, r0, #1 << 6\n"
+ "mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+
+ clock_init();
+ timer_init();
+ gpio_init();
+
+#ifdef CONFIG_SPL_BUILD
+ gd = &gdata;
+ preloader_console_init();
+
+ sunxi_board_init();
+#endif
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+ int rc;
+
+#ifdef CONFIG_SUNXI_GMAC
+ rc = sunxi_gmac_initialize(bis);
+ if (rc < 0) {
+ printf("sunxi: failed to initialize gmac\n");
+ return rc;
+ }
+#endif
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c
new file mode 100644
index 0000000..47fb70f
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock.c
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+
+int clock_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ clock_init_safe();
+#endif
+ clock_init_uart();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
new file mode 100644
index 0000000..5a7da3c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
@@ -0,0 +1,188 @@
+/*
+ * sun4i, sun5i and sun7i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Set safe defaults until PMU is configured */
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
+ sdelay(200);
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+#ifdef CONFIG_SUN7I
+ writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0),
+ &ccm->ahb_gate0);
+#endif
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+}
+#endif
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* uart clock source is apb1 */
+ writel(APB1_CLK_SRC_OSC24M|
+ APB1_CLK_RATE_N_1|
+ APB1_CLK_RATE_M(1),
+ &ccm->apb1_clk_div_cfg);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
+}
+
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (port > 2)
+ return -1;
+
+ /* set the apb clock gate for twi */
+ if (state)
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
+ else
+ clrbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
+ 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \
+ 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
+ 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
+ 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
+ (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
+ 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
+ (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
+ (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
+ (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
+
+static struct {
+ u32 pll1_cfg;
+ unsigned int freq;
+} pll1_para[] = {
+ /* This array must be ordered by frequency. */
+ { PLL1_CFG(16, 0, 0, 0), 384000000 },
+ { PLL1_CFG(16, 1, 0, 0), 768000000 },
+ { PLL1_CFG(20, 1, 0, 0), 960000000 },
+ { PLL1_CFG(21, 1, 0, 0), 1008000000},
+ { PLL1_CFG(22, 1, 0, 0), 1056000000},
+ { PLL1_CFG(23, 1, 0, 0), 1104000000},
+ { PLL1_CFG(24, 1, 0, 0), 1152000000},
+ { PLL1_CFG(25, 1, 0, 0), 1200000000},
+ { PLL1_CFG(26, 1, 0, 0), 1248000000},
+ { PLL1_CFG(27, 1, 0, 0), 1296000000},
+ { PLL1_CFG(28, 1, 0, 0), 1344000000},
+ { PLL1_CFG(29, 1, 0, 0), 1392000000},
+ { PLL1_CFG(30, 1, 0, 0), 1440000000},
+ { PLL1_CFG(31, 1, 0, 0), 1488000000},
+ /* Final catchall entry */
+ { PLL1_CFG(31, 1, 0, 0), ~0},
+};
+
+void clock_set_pll1(unsigned int hz)
+{
+ int i = 0;
+ int axi, ahb, apb0;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Find target frequency */
+ while (pll1_para[i].freq < hz)
+ i++;
+
+ hz = pll1_para[i].freq;
+
+ /* Calculate system clock divisors */
+ axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */
+ ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */
+ apb0 = 2; /* Max 150MHz */
+
+ printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
+
+ /* Map divisors to register values */
+ axi = axi - 1;
+ if (ahb > 4)
+ ahb = 3;
+ else if (ahb > 2)
+ ahb = 2;
+ else if (ahb > 1)
+ ahb = 1;
+ else
+ ahb = 0;
+
+ apb0 = apb0 - 1;
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ sdelay(20);
+
+ /* Configure sys clock divisors */
+ writel(axi << AXI_DIV_SHIFT |
+ ahb << AHB_DIV_SHIFT |
+ apb0 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+
+ /* Configure PLL1 at the desired frequency */
+ writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
+ sdelay(200);
+
+ /* Switch CPU to PLL1 */
+ writel(axi << AXI_DIV_SHIFT |
+ ahb << AHB_DIV_SHIFT |
+ apb0 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ sdelay(20);
+}
+#endif
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+ return 24000000 * n * k / 2;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk
new file mode 100644
index 0000000..00f5ffc
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/config.mk
@@ -0,0 +1,8 @@
+# Build a combined spl + u-boot image
+ifdef CONFIG_SPL
+ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_SPL_FEL
+ALL-y += u-boot-sunxi-with-spl.bin
+endif
+endif
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
new file mode 100644
index 0000000..b4c3d5c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -0,0 +1,19 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ puts("CPU: Allwinner A20 (SUN7I)\n");
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
new file mode 100644
index 0000000..b43c4b4
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -0,0 +1,593 @@
+/*
+ * sunxi DRAM controller initialization
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
+ * and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Unfortunately the only documentation we have on the sun7i DRAM
+ * controller is Allwinner boot0 + boot1 code, and that code uses
+ * magic numbers & shifts with no explanations. Hence this code is
+ * rather undocumented and full of magic.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/sys_proto.h>
+
+#define CPU_CFG_CHIP_VER(n) ((n) << 6)
+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
+#define CPU_CFG_CHIP_REV_A 0x0
+#define CPU_CFG_CHIP_REV_C1 0x1
+#define CPU_CFG_CHIP_REV_C2 0x2
+#define CPU_CFG_CHIP_REV_B 0x3
+
+/*
+ * Wait up to 1s for mask to be clear in given reg.
+ */
+static void await_completion(u32 *reg, u32 mask)
+{
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ while (readl(reg) & mask) {
+ if (timer_get_us() > tmo)
+ panic("Timeout initialising DRAM\n");
+ }
+}
+
+static void mctl_ddr3_reset(void)
+{
+ struct sunxi_dram_reg *dram =
+ (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ udelay(2);
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+}
+
+static void mctl_set_drive(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
+ DRAM_MCR_MODE_EN(0x3) |
+ 0xffc);
+}
+
+static void mctl_itm_disable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_enable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_enable_dll0(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ ((phase >> 16) & 0x3f) << 6);
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
+ udelay(2);
+
+ clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+/*
+ * Note: This differs from pm/standby in that it checks the bus width
+ */
+static void mctl_enable_dllx(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i, n, bus_width;
+
+ bus_width = readl(&dram->dcr);
+
+ if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) ==
+ DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
+ n = DRAM_DCR_NR_DLLCR_32BIT;
+ else
+ n = DRAM_DCR_NR_DLLCR_16BIT;
+
+ for (i = 1; i < n; i++) {
+ clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
+ (phase & 0xf) << 14);
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
+ DRAM_DLLCR_DISABLE);
+ phase >>= 4;
+ }
+ udelay(2);
+
+ for (i = 1; i < n; i++)
+ clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
+ DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ for (i = 1; i < n; i++)
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
+ DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+static u32 hpcr_value[32] = {
+#ifdef CONFIG_SUN7I
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0x0735,
+ 0x1035, 0x1031, 0x0731, 0x1035,
+ 0x0001, 0x1031, 0, 0x1031
+ /* last row differs from boot0 source table
+ * 0x1031, 0x0301, 0x0301, 0x0731
+ * but boot0 code skips #28 and #30, and sets #29 and #31 to the
+ * value from #28 entry (0x1031)
+ */
+#endif
+};
+
+static void mctl_configure_hostport(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i;
+
+ for (i = 0; i < 32; i++)
+ writel(hpcr_value[i], &dram->hpcr[i]);
+}
+
+static void mctl_setup_dram_clock(u32 clk)
+{
+ u32 reg_val;
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* setup DRAM PLL */
+ reg_val = readl(&ccm->pll5_cfg);
+ reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
+ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
+ if (clk >= 540 && clk < 552) {
+ /* dram = 540MHz, pll5p = 540MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
+ reg_val |= CCM_PLL5_CTRL_P(1);
+ } else if (clk >= 512 && clk < 528) {
+ /* dram = 512MHz, pll5p = 384MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
+ reg_val |= CCM_PLL5_CTRL_P(2);
+ } else if (clk >= 496 && clk < 504) {
+ /* dram = 496MHz, pll5p = 372MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
+ reg_val |= CCM_PLL5_CTRL_P(2);
+ } else if (clk >= 468 && clk < 480) {
+ /* dram = 468MHz, pll5p = 468MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
+ reg_val |= CCM_PLL5_CTRL_P(1);
+ } else if (clk >= 396 && clk < 408) {
+ /* dram = 396MHz, pll5p = 396MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
+ reg_val |= CCM_PLL5_CTRL_P(1);
+ } else {
+ /* any other frequency that is a multiple of 24 */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
+ reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2));
+ }
+ reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
+ reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
+ writel(reg_val, &ccm->pll5_cfg);
+ udelay(5500);
+
+ setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
+
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
+ /* reset GPS */
+ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+ udelay(1);
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+#endif
+
+ /* setup MBUS clock */
+ reg_val = CCM_MBUS_CTRL_GATE |
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
+ writel(reg_val, &ccm->mbus_clk_cfg);
+
+ /*
+ * open DRAMC AHB & DLL register clock
+ * close it first
+ */
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+ udelay(22);
+
+ /* then open it */
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+ udelay(22);
+}
+
+static int dramc_scan_readpipe(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+
+ /* data training trigger */
+#ifdef CONFIG_SUN7I
+ clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
+#endif
+ setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check whether data training process has completed */
+ await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check data training result */
+ reg_val = readl(&dram->csr);
+ if (reg_val & DRAM_CSR_FAILED)
+ return -1;
+
+ return 0;
+}
+
+static int dramc_scan_dll_para(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc};
+ const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03,
+ 0x02, 0x01, 0x00, 0x08, 0x10,
+ 0x18, 0x20, 0x28, 0x30, 0x38};
+ u32 clk_dqs_count[15];
+ u32 dqs_i, clk_i, cr_i;
+ u32 max_val, min_val;
+ u32 dqs_index, clk_index;
+
+ /* Find DQS_DLY Pass Count for every CLK_DLY */
+ for (clk_i = 0; clk_i < 15; clk_i++) {
+ clk_dqs_count[clk_i] = 0;
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ (clk_dly[clk_i] & 0x3f) << 6);
+ for (dqs_i = 0; dqs_i < 7; dqs_i++) {
+ for (cr_i = 1; cr_i < 5; cr_i++) {
+ clrsetbits_le32(&dram->dllcr[cr_i],
+ 0x4f << 14,
+ (dqs_dly[dqs_i] & 0x4f) << 14);
+ }
+ udelay(2);
+ if (dramc_scan_readpipe() == 0)
+ clk_dqs_count[clk_i]++;
+ }
+ }
+ /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */
+ for (dqs_i = 15; dqs_i > 0; dqs_i--) {
+ max_val = 15;
+ min_val = 15;
+ for (clk_i = 0; clk_i < 15; clk_i++) {
+ if (clk_dqs_count[clk_i] == dqs_i) {
+ max_val = clk_i;
+ if (min_val == 15)
+ min_val = clk_i;
+ }
+ }
+ if (max_val < 15)
+ break;
+ }
+
+ /* Check if Find a CLK_DLY failed */
+ if (!dqs_i)
+ goto fail;
+
+ /* Find the middle index of CLK_DLY */
+ clk_index = (max_val + min_val) >> 1;
+ if ((max_val == (15 - 1)) && (min_val > 0))
+ /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle
+ * value can be more close to the max_val
+ */
+ clk_index = (15 + clk_index) >> 1;
+ else if ((max_val < (15 - 1)) && (min_val == 0))
+ /* if CLK_DLY[0] is very good, then the middle value can be more
+ * close to the min_val
+ */
+ clk_index >>= 1;
+ if (clk_dqs_count[clk_index] < dqs_i)
+ clk_index = min_val;
+
+ /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan
+ * read pipe again
+ */
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ (clk_dly[clk_index] & 0x3f) << 6);
+ max_val = 7;
+ min_val = 7;
+ for (dqs_i = 0; dqs_i < 7; dqs_i++) {
+ clk_dqs_count[dqs_i] = 0;
+ for (cr_i = 1; cr_i < 5; cr_i++) {
+ clrsetbits_le32(&dram->dllcr[cr_i],
+ 0x4f << 14,
+ (dqs_dly[dqs_i] & 0x4f) << 14);
+ }
+ udelay(2);
+ if (dramc_scan_readpipe() == 0) {
+ clk_dqs_count[dqs_i] = 1;
+ max_val = dqs_i;
+ if (min_val == 7)
+ min_val = dqs_i;
+ }
+ }
+
+ if (max_val < 7) {
+ dqs_index = (max_val + min_val) >> 1;
+ if ((max_val == (7-1)) && (min_val > 0))
+ dqs_index = (7 + dqs_index) >> 1;
+ else if ((max_val < (7-1)) && (min_val == 0))
+ dqs_index >>= 1;
+ if (!clk_dqs_count[dqs_index])
+ dqs_index = min_val;
+ for (cr_i = 1; cr_i < 5; cr_i++) {
+ clrsetbits_le32(&dram->dllcr[cr_i],
+ 0x4f << 14,
+ (dqs_dly[dqs_index] & 0x4f) << 14);
+ }
+ udelay(2);
+ return dramc_scan_readpipe();
+ }
+
+fail:
+ clrbits_le32(&dram->dllcr[0], 0x3f << 6);
+ for (cr_i = 1; cr_i < 5; cr_i++)
+ clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14);
+ udelay(2);
+
+ return dramc_scan_readpipe();
+}
+
+static void dramc_clock_output_en(u32 on)
+{
+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ if (on)
+ setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+ else
+ clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+#endif
+}
+
+static const u16 tRFC_table[2][6] = {
+ /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
+ /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */
+ { 77, 108, 131, 200, 336, 336 },
+ /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */
+ { 93, 93, 113, 164, 308, 359 }
+};
+
+static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 tRFC, tREFI;
+
+ tRFC = (tRFC_table[type][density] * clk + 1023) >> 10;
+ tREFI = (7987 * clk) >> 10; /* <= 7.8us */
+
+ writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
+}
+
+unsigned long dramc_init(struct dram_para *para)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+ u32 density;
+ int ret_val;
+
+ /* check input dram parameter structure */
+ if (!para)
+ return 0;
+
+ /* setup DRAM relative clock */
+ mctl_setup_dram_clock(para->clock);
+
+ /* reset external DRAM */
+ mctl_set_drive();
+
+ /* dram clock off */
+ dramc_clock_output_en(0);
+
+ mctl_itm_disable();
+ mctl_enable_dll0(para->tpr3);
+
+ /* configure external DRAM */
+ reg_val = 0x0;
+ if (para->type == DRAM_MEMORY_TYPE_DDR3)
+ reg_val |= DRAM_DCR_TYPE_DDR3;
+ reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
+
+ if (para->density == 256)
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+ else if (para->density == 512)
+ density = DRAM_DCR_CHIP_DENSITY_512M;
+ else if (para->density == 1024)
+ density = DRAM_DCR_CHIP_DENSITY_1024M;
+ else if (para->density == 2048)
+ density = DRAM_DCR_CHIP_DENSITY_2048M;
+ else if (para->density == 4096)
+ density = DRAM_DCR_CHIP_DENSITY_4096M;
+ else if (para->density == 8192)
+ density = DRAM_DCR_CHIP_DENSITY_8192M;
+ else
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+
+ reg_val |= DRAM_DCR_CHIP_DENSITY(density);
+ reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
+ reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
+ reg_val |= DRAM_DCR_CMD_RANK_ALL;
+ reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
+ writel(reg_val, &dram->dcr);
+
+#ifdef CONFIG_SUN7I
+ setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1));
+ if (para->tpr4 & 0x2)
+ clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1));
+ dramc_clock_output_en(1);
+#endif
+
+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
+ /* set odt impendance divide ratio */
+ reg_val = ((para->zq) >> 8) & 0xfffff;
+ reg_val |= ((para->zq) & 0xff) << 20;
+ reg_val |= (para->zq) & 0xf0000000;
+ writel(reg_val, &dram->zqcr0);
+#endif
+
+#ifdef CONFIG_SUN7I
+ /* Set CKE Delay to about 1ms */
+ setbits_le32(&dram->idcr, 0x1ffff);
+#endif
+
+#ifdef CONFIG_SUN7I
+ if ((readl(&dram->ppwrsctl) & 0x1) != 0x1)
+ mctl_ddr3_reset();
+ else
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+#endif
+
+ udelay(1);
+
+ await_completion(&dram->ccr, DRAM_CCR_INIT);
+
+ mctl_enable_dllx(para->tpr3);
+
+ /* set refresh period */
+ dramc_set_autorefresh_cycle(para->clock, para->type - 2, density);
+
+ /* set timing parameters */
+ writel(para->tpr0, &dram->tpr0);
+ writel(para->tpr1, &dram->tpr1);
+ writel(para->tpr2, &dram->tpr2);
+
+ if (para->type == DRAM_MEMORY_TYPE_DDR3) {
+ reg_val = DRAM_MR_BURST_LENGTH(0x0);
+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
+ reg_val |= DRAM_MR_POWER_DOWN;
+#endif
+ reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
+ } else if (para->type == DRAM_MEMORY_TYPE_DDR2) {
+ reg_val = DRAM_MR_BURST_LENGTH(0x2);
+ reg_val |= DRAM_MR_CAS_LAT(para->cas);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
+ }
+ writel(reg_val, &dram->mr);
+
+ writel(para->emr1, &dram->emr);
+ writel(para->emr2, &dram->emr2);
+ writel(para->emr3, &dram->emr3);
+
+ /* set DQS window mode */
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
+
+#ifdef CONFIG_SUN7I
+ /* Command rate timing mode 2T & 1T */
+ if (para->tpr4 & 0x1)
+ setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
+#endif
+ /* reset external DRAM */
+ setbits_le32(&dram->ccr, DRAM_CCR_INIT);
+ await_completion(&dram->ccr, DRAM_CCR_INIT);
+
+#ifdef CONFIG_SUN7I
+ /* setup zq calibration manual */
+ reg_val = readl(&dram->ppwrsctl);
+ if ((reg_val & 0x1) == 1) {
+ /* super_standby_flag = 1 */
+
+ reg_val = readl(0x01c20c00 + 0x120); /* rtc */
+ reg_val &= 0x000fffff;
+ reg_val |= 0x17b00000;
+ writel(reg_val, &dram->zqcr0);
+
+ /* exit self-refresh state */
+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
+ /* check whether command has been executed */
+ await_completion(&dram->dcr, 0x1 << 31);
+
+ udelay(2);
+
+ /* dram pad hold off */
+ setbits_le32(&dram->ppwrsctl, 0x16510000);
+
+ await_completion(&dram->ppwrsctl, 0x1);
+
+ /* exit self-refresh state */
+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
+
+ /* check whether command has been executed */
+ await_completion(&dram->dcr, 0x1 << 31);
+
+ udelay(2);
+
+ /* issue a refresh command */
+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27);
+ await_completion(&dram->dcr, 0x1 << 31);
+
+ udelay(2);
+ }
+#endif
+
+ /* scan read pipe value */
+ mctl_itm_enable();
+ if (para->tpr3 & (0x1 << 31)) {
+ ret_val = dramc_scan_dll_para();
+ if (ret_val == 0)
+ para->tpr3 =
+ (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) |
+ (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) |
+ (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) |
+ (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) |
+ (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12
+ );
+ } else {
+ ret_val = dramc_scan_readpipe();
+ }
+
+ if (ret_val < 0)
+ return 0;
+
+ /* configure all host port */
+ mctl_configure_hostport();
+
+ return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+}
diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c
new file mode 100644
index 0000000..1f2843f
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/pinmux.c
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+int sunxi_gpio_set_cfgpin(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_CFG_INDEX(pin);
+ u32 offset = GPIO_CFG_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
+
+ return 0;
+}
+
+int sunxi_gpio_get_cfgpin(u32 pin)
+{
+ u32 cfg;
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_CFG_INDEX(pin);
+ u32 offset = GPIO_CFG_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ cfg = readl(&pio->cfg[0] + index);
+ cfg >>= offset;
+
+ return cfg & 0xf;
+}
+
+int sunxi_gpio_set_drv(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_DRV_INDEX(pin);
+ u32 offset = GPIO_DRV_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
+
+ return 0;
+}
+
+int sunxi_gpio_set_pull(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_PULL_INDEX(pin);
+ u32 offset = GPIO_PULL_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c
new file mode 100644
index 0000000..6b392fa
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/start.c
@@ -0,0 +1 @@
+/* Intentionally empty. Only needed to get FEL SPL link line right */
diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c
new file mode 100644
index 0000000..3626389
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/timer.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TIMER_MODE (0x0 << 7) /* continuous mode */
+#define TIMER_DIV (0x0 << 4) /* pre scale 1 */
+#define TIMER_SRC (0x1 << 2) /* osc24m */
+#define TIMER_RELOAD (0x1 << 1) /* reload internal value */
+#define TIMER_EN (0x1 << 0) /* enable timer */
+
+#define TIMER_CLOCK (24 * 1000 * 1000)
+#define COUNT_TO_USEC(x) ((x) / 24)
+#define USEC_TO_COUNT(x) ((x) * 24)
+#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ)
+#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ)
+
+#define TIMER_LOAD_VAL 0xffffffff
+
+#define TIMER_NUM 0 /* we use timer 0 */
+
+/* read the 32-bit timer */
+static ulong read_timer(void)
+{
+ struct sunxi_timer_reg *timers =
+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+ struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
+
+ /*
+ * The hardware timer counts down, therefore we invert to
+ * produce an incrementing timer.
+ */
+ return ~readl(&timer->val);
+}
+
+/* init timer register */
+int timer_init(void)
+{
+ struct sunxi_timer_reg *timers =
+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+ struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
+ writel(TIMER_LOAD_VAL, &timer->inter);
+ writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
+ &timer->ctl);
+
+ return 0;
+}
+
+/* timer without interrupts */
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+ulong get_timer_masked(void)
+{
+ /* current tick value */
+ ulong now = TICKS_TO_HZ(read_timer());
+
+ if (now >= gd->arch.lastinc) /* normal (non rollover) */
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ else {
+ /* rollover */
+ gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
+ - gd->arch.lastinc) + now;
+ }
+ gd->arch.lastinc = now;
+
+ return gd->arch.tbl;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+ long tmo = USEC_TO_COUNT(usec);
+ ulong now, last = read_timer();
+
+ while (tmo > 0) {
+ now = read_timer();
+ if (now > last) /* normal (non rollover) */
+ tmo -= now - last;
+ else /* rollover */
+ tmo -= TIMER_LOAD_VAL - last + now;
+ last = now;
+ }
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
new file mode 100644
index 0000000..364e35c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2013
+ * Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(s_init)
+SECTIONS
+{
+ . = 0x00002000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text.s_init)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+ . = .;
+
+ . = ALIGN(4);
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ . = ALIGN(4);
+ .note.gnu.build-id :
+ {
+ *(.note.gnu.build-id)
+ }
+ _end = .;
+
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ __bss_base = .;
+ }
+
+ .bss __bss_base (OVERLAY) : {
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_limit = .;
+ }
+
+ .bss_end __bss_limit (OVERLAY) : {
+ KEEP(*(.__bss_end));
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ /DISCARD/ : { *(.note*) }
+}
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
new file mode 100644
index 0000000..5008028
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Based on omap-common/u-boot-spl.lds:
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } > .sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } > .sdram
+}
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index 33d3f36..4b11aa4 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -50,10 +50,10 @@ reset:
*/
adr x0, vectors
switch_el x1, 3f, 2f, 1f
-3: mrs x0, scr_el3
+3: msr vbar_el3, x0
+ mrs x0, scr_el3
orr x0, x0, #0xf /* SCR_EL3.NS|IRQ|FIQ|EA */
msr scr_el3, x0
- msr vbar_el3, x0
msr cptr_el3, xzr /* Enable FP/SIMD */
ldr x0, =COUNTER_FREQUENCY
msr cntfrq_el0, x0 /* Initialize CNTFRQ */
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
index 7f4debb..cbb5a52 100644
--- a/arch/arm/cpu/at91-common/spl.c
+++ b/arch/arm/cpu/at91-common/spl.c
@@ -20,6 +20,43 @@ static void at91_disable_wdt(void)
writel(AT91_WDT_MR_WDDIS, &wdt->mr);
}
+static void switch_to_main_crystal_osc(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = readl(&pmc->mor);
+ tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff);
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_MOSCEN;
+ tmp |= AT91_PMC_MOR_OSCOUNT(8);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+ while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS))
+ ;
+
+ tmp = readl(&pmc->mor);
+ tmp &= ~AT91_PMC_MOR_OSCBYPASS;
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+
+ tmp = readl(&pmc->mor);
+ tmp |= AT91_PMC_MOR_MOSCSEL;
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS))
+ ;
+
+ tmp = readl(&pmc->mor);
+ tmp &= ~AT91_PMC_MOR_MOSCRCEN;
+ tmp &= ~AT91_PMC_MOR_KEY(0xff);
+ tmp |= AT91_PMC_MOR_KEY(0x37);
+ writel(tmp, &pmc->mor);
+}
+
void at91_plla_init(u32 pllar)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
@@ -76,6 +113,8 @@ u32 spl_boot_mode(void)
void s_init(void)
{
+ switch_to_main_crystal_osc();
+
/* disable watchdog */
at91_disable_wdt();
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 4535608..04f6239 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -70,7 +70,10 @@ typedef struct at91_pmc {
#define AT91_PMC_MOR_MOSCEN 0x01
#define AT91_PMC_MOR_OSCBYPASS 0x02
+#define AT91_PMC_MOR_MOSCRCEN 0x08
#define AT91_PMC_MOR_OSCOUNT(x) ((x & 0xff) << 8)
+#define AT91_PMC_MOR_KEY(x) ((x & 0xff) << 16)
+#define AT91_PMC_MOR_MOSCSEL (1 << 24)
#define AT91_PMC_PLLXR_DIV(x) (x & 0xFF)
#define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8)
@@ -142,6 +145,7 @@ typedef struct at91_pmc {
#define AT91_PMC_IXR_PCKRDY1 0x00000200
#define AT91_PMC_IXR_PCKRDY2 0x00000400
#define AT91_PMC_IXR_PCKRDY3 0x00000800
+#define AT91_PMC_IXR_MOSCSELS 0x00010000
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index a471038..d49c184 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -12,6 +12,9 @@
#ifndef __AT91SAM9X5_H__
#define __AT91SAM9X5_H__
+#define CONFIG_ARM926EJS /* ARM926EJS Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 family */
+
/*
* Peripheral identifiers/interrupts.
*/
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index a63f974..d712a0d 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -25,8 +25,6 @@
# include <asm/arch/at91sam9x5.h>
#elif defined(CONFIG_AT91CAP9)
# include <asm/arch/at91cap9.h>
-#elif defined(CONFIG_AT91X40)
-# include <asm/arch/at91x40.h>
#elif defined(CONFIG_SAMA5D3)
# include <asm/arch/sama5d3.h>
#else
diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
new file mode 100644
index 0000000..5669f39
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CLOCK_H
+#define _SUNXI_CLOCK_H
+
+#include <linux/types.h>
+
+#define CLK_GATE_OPEN 0x1
+#define CLK_GATE_CLOSE 0x0
+
+/* clock control module regs definition */
+#include <asm/arch/clock_sun4i.h>
+
+#ifndef __ASSEMBLY__
+int clock_init(void);
+int clock_twi_onoff(int port, int state);
+void clock_set_pll1(unsigned int hz);
+unsigned int clock_get_pll6(void);
+void clock_init_safe(void);
+void clock_init_uart(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
new file mode 100644
index 0000000..928f3f2
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -0,0 +1,256 @@
+/*
+ * sun4i, sun5i and sun7i clock register definitions
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CLOCK_SUN4I_H
+#define _SUNXI_CLOCK_SUN4I_H
+
+struct sunxi_ccm_reg {
+ u32 pll1_cfg; /* 0x00 pll1 control */
+ u32 pll1_tun; /* 0x04 pll1 tuning */
+ u32 pll2_cfg; /* 0x08 pll2 control */
+ u32 pll2_tun; /* 0x0c pll2 tuning */
+ u32 pll3_cfg; /* 0x10 pll3 control */
+ u8 res0[0x4];
+ u32 pll4_cfg; /* 0x18 pll4 control */
+ u8 res1[0x4];
+ u32 pll5_cfg; /* 0x20 pll5 control */
+ u32 pll5_tun; /* 0x24 pll5 tuning */
+ u32 pll6_cfg; /* 0x28 pll6 control */
+ u32 pll6_tun; /* 0x2c pll6 tuning */
+ u32 pll7_cfg; /* 0x30 pll7 control */
+ u32 pll1_tun2; /* 0x34 pll5 tuning2 */
+ u8 res2[0x4];
+ u32 pll5_tun2; /* 0x3c pll5 tuning2 */
+ u8 res3[0xc];
+ u32 pll_lock_dbg; /* 0x4c pll lock time debug */
+ u32 osc24m_cfg; /* 0x50 osc24m control */
+ u32 cpu_ahb_apb0_cfg; /* 0x54 cpu,ahb and apb0 divide ratio */
+ u32 apb1_clk_div_cfg; /* 0x58 apb1 clock dividor */
+ u32 axi_gate; /* 0x5c axi module clock gating */
+ u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */
+ u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */
+ u32 apb0_gate; /* 0x68 apb0 module clock gating */
+ u32 apb1_gate; /* 0x6c apb1 module clock gating */
+ u8 res4[0x10];
+ u32 nand_sclk_cfg; /* 0x80 nand sub clock control */
+ u32 ms_sclk_cfg; /* 0x84 memory stick sub clock control */
+ u32 sd0_clk_cfg; /* 0x88 sd0 clock control */
+ u32 sd1_clk_cfg; /* 0x8c sd1 clock control */
+ u32 sd2_clk_cfg; /* 0x90 sd2 clock control */
+ u32 sd3_clk_cfg; /* 0x94 sd3 clock control */
+ u32 ts_clk_cfg; /* 0x98 transport stream clock control */
+ u32 ss_clk_cfg; /* 0x9c */
+ u32 spi0_clk_cfg; /* 0xa0 */
+ u32 spi1_clk_cfg; /* 0xa4 */
+ u32 spi2_clk_cfg; /* 0xa8 */
+ u32 pata_clk_cfg; /* 0xac */
+ u32 ir0_clk_cfg; /* 0xb0 */
+ u32 ir1_clk_cfg; /* 0xb4 */
+ u32 iis_clk_cfg; /* 0xb8 */
+ u32 ac97_clk_cfg; /* 0xbc */
+ u32 spdif_clk_cfg; /* 0xc0 */
+ u32 keypad_clk_cfg; /* 0xc4 */
+ u32 sata_clk_cfg; /* 0xc8 */
+ u32 usb_clk_cfg; /* 0xcc */
+ u32 gps_clk_cfg; /* 0xd0 */
+ u32 spi3_clk_cfg; /* 0xd4 */
+ u8 res5[0x28];
+ u32 dram_clk_cfg; /* 0x100 */
+ u32 be0_clk_cfg; /* 0x104 */
+ u32 be1_clk_cfg; /* 0x108 */
+ u32 fe0_clk_cfg; /* 0x10c */
+ u32 fe1_clk_cfg; /* 0x110 */
+ u32 mp_clk_cfg; /* 0x114 */
+ u32 lcd0_ch0_clk_cfg; /* 0x118 */
+ u32 lcd1_ch0_clk_cfg; /* 0x11c */
+ u32 csi_isp_clk_cfg; /* 0x120 */
+ u8 res6[0x4];
+ u32 tvd_clk_reg; /* 0x128 */
+ u32 lcd0_ch1_clk_cfg; /* 0x12c */
+ u32 lcd1_ch1_clk_cfg; /* 0x130 */
+ u32 csi0_clk_cfg; /* 0x134 */
+ u32 csi1_clk_cfg; /* 0x138 */
+ u32 ve_clk_cfg; /* 0x13c */
+ u32 audio_codec_clk_cfg; /* 0x140 */
+ u32 avs_clk_cfg; /* 0x144 */
+ u32 ace_clk_cfg; /* 0x148 */
+ u32 lvds_clk_cfg; /* 0x14c */
+ u32 hdmi_clk_cfg; /* 0x150 */
+ u32 mali_clk_cfg; /* 0x154 */
+ u8 res7[0x4];
+ u32 mbus_clk_cfg; /* 0x15c */
+ u8 res8[0x4];
+ u32 gmac_clk_cfg; /* 0x164 */
+};
+
+/* apb1 bit field */
+#define APB1_CLK_SRC_OSC24M (0x0 << 24)
+#define APB1_CLK_SRC_PLL6 (0x1 << 24)
+#define APB1_CLK_SRC_LOSC (0x2 << 24)
+#define APB1_CLK_SRC_MASK (0x3 << 24)
+#define APB1_CLK_RATE_N_1 (0x0 << 16)
+#define APB1_CLK_RATE_N_2 (0x1 << 16)
+#define APB1_CLK_RATE_N_4 (0x2 << 16)
+#define APB1_CLK_RATE_N_8 (0x3 << 16)
+#define APB1_CLK_RATE_N_MASK (3 << 16)
+#define APB1_CLK_RATE_M(m) (((m)-1) << 0)
+#define APB1_CLK_RATE_M_MASK (0x1f << 0)
+
+/* apb1 gate field */
+#define APB1_GATE_UART_SHIFT (16)
+#define APB1_GATE_UART_MASK (0xff << APB1_GATE_UART_SHIFT)
+#define APB1_GATE_TWI_SHIFT (0)
+#define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT)
+
+/* clock divide */
+#define AXI_DIV_SHIFT (0)
+#define AXI_DIV_1 0
+#define AXI_DIV_2 1
+#define AXI_DIV_3 2
+#define AXI_DIV_4 3
+#define AHB_DIV_SHIFT (4)
+#define AHB_DIV_1 0
+#define AHB_DIV_2 1
+#define AHB_DIV_4 2
+#define AHB_DIV_8 3
+#define APB0_DIV_SHIFT (8)
+#define APB0_DIV_1 0
+#define APB0_DIV_2 1
+#define APB0_DIV_4 2
+#define APB0_DIV_8 3
+#define CPU_CLK_SRC_SHIFT (16)
+#define CPU_CLK_SRC_OSC24M 1
+#define CPU_CLK_SRC_PLL1 2
+
+#define CCM_PLL1_CFG_ENABLE_SHIFT 31
+#define CCM_PLL1_CFG_VCO_RST_SHIFT 30
+#define CCM_PLL1_CFG_VCO_BIAS_SHIFT 26
+#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT 25
+#define CCM_PLL1_CFG_BIAS_CUR_SHIFT 20
+#define CCM_PLL1_CFG_DIVP_SHIFT 16
+#define CCM_PLL1_CFG_LCK_TMR_SHIFT 13
+#define CCM_PLL1_CFG_FACTOR_N_SHIFT 8
+#define CCM_PLL1_CFG_FACTOR_K_SHIFT 4
+#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT 3
+#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT 2
+#define CCM_PLL1_CFG_FACTOR_M_SHIFT 0
+
+#define PLL1_CFG_DEFAULT 0xa1005000
+
+#define PLL6_CFG_DEFAULT 0xa1009911
+
+/* nand clock */
+#define NAND_CLK_SRC_OSC24 0
+#define NAND_CLK_DIV_N 0
+#define NAND_CLK_DIV_M 0
+
+/* gps clock */
+#define GPS_SCLK_GATING_OFF 0
+#define GPS_RESET 0
+
+/* ahb clock gate bit offset */
+#define AHB_GATE_OFFSET_GPS 26
+#define AHB_GATE_OFFSET_SATA 25
+#define AHB_GATE_OFFSET_PATA 24
+#define AHB_GATE_OFFSET_SPI3 23
+#define AHB_GATE_OFFSET_SPI2 22
+#define AHB_GATE_OFFSET_SPI1 21
+#define AHB_GATE_OFFSET_SPI0 20
+#define AHB_GATE_OFFSET_TS0 18
+#define AHB_GATE_OFFSET_EMAC 17
+#define AHB_GATE_OFFSET_ACE 16
+#define AHB_GATE_OFFSET_DLL 15
+#define AHB_GATE_OFFSET_SDRAM 14
+#define AHB_GATE_OFFSET_NAND 13
+#define AHB_GATE_OFFSET_MS 12
+#define AHB_GATE_OFFSET_MMC3 11
+#define AHB_GATE_OFFSET_MMC2 10
+#define AHB_GATE_OFFSET_MMC1 9
+#define AHB_GATE_OFFSET_MMC0 8
+#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n))
+#define AHB_GATE_OFFSET_BIST 7
+#define AHB_GATE_OFFSET_DMA 6
+#define AHB_GATE_OFFSET_SS 5
+#define AHB_GATE_OFFSET_USB_OHCI1 4
+#define AHB_GATE_OFFSET_USB_EHCI1 3
+#define AHB_GATE_OFFSET_USB_OHCI0 2
+#define AHB_GATE_OFFSET_USB_EHCI0 1
+#define AHB_GATE_OFFSET_USB 0
+
+/* ahb clock gate bit offset (second register) */
+#define AHB_GATE_OFFSET_GMAC 17
+
+#define CCM_AHB_GATE_GPS (0x1 << 26)
+#define CCM_AHB_GATE_SDRAM (0x1 << 14)
+#define CCM_AHB_GATE_DLL (0x1 << 15)
+#define CCM_AHB_GATE_ACE (0x1 << 16)
+
+#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0)
+#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3)
+#define CCM_PLL5_CTRL_M_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2)
+#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3)
+#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4)
+#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3)
+#define CCM_PLL5_CTRL_K_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_LDO (0x1 << 7)
+#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8)
+#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f)
+#define CCM_PLL5_CTRL_N_X(n) (n)
+#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16)
+#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3)
+#define CCM_PLL5_CTRL_P_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_BW (0x1 << 18)
+#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19)
+#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20)
+#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f)
+#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1)
+#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25)
+#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29)
+#define CCM_PLL5_CTRL_BYPASS (0x1 << 30)
+#define CCM_PLL5_CTRL_EN (0x1 << 31)
+
+#define CCM_PLL6_CTRL_N_SHIFT 8
+#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_K_SHIFT 4
+#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT)
+
+#define CCM_GPS_CTRL_RESET (0x1 << 0)
+#define CCM_GPS_CTRL_GATE (0x1 << 1)
+
+#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15)
+
+#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0)
+#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf)
+#define CCM_MBUS_CTRL_M_X(n) ((n) - 1)
+#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16)
+#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf)
+#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0)))
+#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24)
+#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3)
+#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0
+#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1
+#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2
+#define CCM_MBUS_CTRL_GATE (0x1 << 31)
+
+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
+#define CCM_MMC_CTRL_PLL6 (0x1 << 24)
+#define CCM_MMC_CTRL_PLL5 (0x2 << 24)
+
+#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
+
+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
+#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
+#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+
+#endif /* _SUNXI_CLOCK_SUN4I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
new file mode 100644
index 0000000..a987e51d
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPU_H
+#define _SUNXI_CPU_H
+
+#define SUNXI_SRAM_A1_BASE 0x00000000
+#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */
+
+#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */
+#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */
+#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */
+#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */
+#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */
+
+#define SUNXI_SRAMC_BASE 0x01c00000
+#define SUNXI_DRAMC_BASE 0x01c01000
+#define SUNXI_DMA_BASE 0x01c02000
+#define SUNXI_NFC_BASE 0x01c03000
+#define SUNXI_TS_BASE 0x01c04000
+#define SUNXI_SPI0_BASE 0x01c05000
+#define SUNXI_SPI1_BASE 0x01c06000
+#define SUNXI_MS_BASE 0x01c07000
+#define SUNXI_TVD_BASE 0x01c08000
+#define SUNXI_CSI0_BASE 0x01c09000
+#define SUNXI_TVE0_BASE 0x01c0a000
+#define SUNXI_EMAC_BASE 0x01c0b000
+#define SUNXI_LCD0_BASE 0x01c0C000
+#define SUNXI_LCD1_BASE 0x01c0d000
+#define SUNXI_VE_BASE 0x01c0e000
+#define SUNXI_MMC0_BASE 0x01c0f000
+#define SUNXI_MMC1_BASE 0x01c10000
+#define SUNXI_MMC2_BASE 0x01c11000
+#define SUNXI_MMC3_BASE 0x01c12000
+#define SUNXI_USB0_BASE 0x01c13000
+#define SUNXI_USB1_BASE 0x01c14000
+#define SUNXI_SS_BASE 0x01c15000
+#define SUNXI_HDMI_BASE 0x01c16000
+#define SUNXI_SPI2_BASE 0x01c17000
+#define SUNXI_SATA_BASE 0x01c18000
+#define SUNXI_PATA_BASE 0x01c19000
+#define SUNXI_ACE_BASE 0x01c1a000
+#define SUNXI_TVE1_BASE 0x01c1b000
+#define SUNXI_USB2_BASE 0x01c1c000
+#define SUNXI_CSI1_BASE 0x01c1d000
+#define SUNXI_TZASC_BASE 0x01c1e000
+#define SUNXI_SPI3_BASE 0x01c1f000
+
+#define SUNXI_CCM_BASE 0x01c20000
+#define SUNXI_INTC_BASE 0x01c20400
+#define SUNXI_PIO_BASE 0x01c20800
+#define SUNXI_TIMER_BASE 0x01c20c00
+#define SUNXI_SPDIF_BASE 0x01c21000
+#define SUNXI_AC97_BASE 0x01c21400
+#define SUNXI_IR0_BASE 0x01c21800
+#define SUNXI_IR1_BASE 0x01c21c00
+
+#define SUNXI_IIS_BASE 0x01c22400
+#define SUNXI_LRADC_BASE 0x01c22800
+#define SUNXI_AD_DA_BASE 0x01c22c00
+#define SUNXI_KEYPAD_BASE 0x01c23000
+#define SUNXI_TZPC_BASE 0x01c23400
+#define SUNXI_SID_BASE 0x01c23800
+#define SUNXI_SJTAG_BASE 0x01c23c00
+
+#define SUNXI_TP_BASE 0x01c25000
+#define SUNXI_PMU_BASE 0x01c25400
+#define SUNXI_CPUCFG_BASE 0x01c25c00
+
+#define SUNXI_UART0_BASE 0x01c28000
+#define SUNXI_UART1_BASE 0x01c28400
+#define SUNXI_UART2_BASE 0x01c28800
+#define SUNXI_UART3_BASE 0x01c28c00
+#define SUNXI_UART4_BASE 0x01c29000
+#define SUNXI_UART5_BASE 0x01c29400
+#define SUNXI_UART6_BASE 0x01c29800
+#define SUNXI_UART7_BASE 0x01c29c00
+#define SUNXI_PS2_0_BASE 0x01c2a000
+#define SUNXI_PS2_1_BASE 0x01c2a400
+
+#define SUNXI_TWI0_BASE 0x01c2ac00
+#define SUNXI_TWI1_BASE 0x01c2b000
+#define SUNXI_TWI2_BASE 0x01c2b400
+
+#define SUNXI_CAN_BASE 0x01c2bc00
+
+#define SUNXI_SCR_BASE 0x01c2c400
+
+#define SUNXI_GPS_BASE 0x01c30000
+#define SUNXI_MALI400_BASE 0x01c40000
+#define SUNXI_GMAC_BASE 0x01c50000
+
+/* module sram */
+#define SUNXI_SRAM_C_BASE 0x01d00000
+
+#define SUNXI_DE_FE0_BASE 0x01e00000
+#define SUNXI_DE_FE1_BASE 0x01e20000
+#define SUNXI_DE_BE0_BASE 0x01e60000
+#define SUNXI_DE_BE1_BASE 0x01e40000
+#define SUNXI_MP_BASE 0x01e80000
+#define SUNXI_AVG_BASE 0x01ea0000
+
+/* CoreSight Debug Module */
+#define SUNXI_CSDM_BASE 0x3f500000
+
+#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */
+
+#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */
+
+#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c)
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
new file mode 100644
index 0000000..67fbfad
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Sunxi platform dram register definition.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_H
+#define _SUNXI_DRAM_H
+
+#include <linux/types.h>
+
+struct sunxi_dram_reg {
+ u32 ccr; /* 0x00 controller configuration register */
+ u32 dcr; /* 0x04 dram configuration register */
+ u32 iocr; /* 0x08 i/o configuration register */
+ u32 csr; /* 0x0c controller status register */
+ u32 drr; /* 0x10 dram refresh register */
+ u32 tpr0; /* 0x14 dram timing parameters register 0 */
+ u32 tpr1; /* 0x18 dram timing parameters register 1 */
+ u32 tpr2; /* 0x1c dram timing parameters register 2 */
+ u32 gdllcr; /* 0x20 global dll control register */
+ u8 res0[0x28];
+ u32 rslr0; /* 0x4c rank system latency register */
+ u32 rslr1; /* 0x50 rank system latency register */
+ u8 res1[0x8];
+ u32 rdgr0; /* 0x5c rank dqs gating register */
+ u32 rdgr1; /* 0x60 rank dqs gating register */
+ u8 res2[0x34];
+ u32 odtcr; /* 0x98 odt configuration register */
+ u32 dtr0; /* 0x9c data training register 0 */
+ u32 dtr1; /* 0xa0 data training register 1 */
+ u32 dtar; /* 0xa4 data training address register */
+ u32 zqcr0; /* 0xa8 zq control register 0 */
+ u32 zqcr1; /* 0xac zq control register 1 */
+ u32 zqsr; /* 0xb0 zq status register */
+ u32 idcr; /* 0xb4 initializaton delay configure reg */
+ u8 res3[0x138];
+ u32 mr; /* 0x1f0 mode register */
+ u32 emr; /* 0x1f4 extended mode register */
+ u32 emr2; /* 0x1f8 extended mode register */
+ u32 emr3; /* 0x1fc extended mode register */
+ u32 dllctr; /* 0x200 dll control register */
+ u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */
+ /* 0x208 dll control register 1(byte 1) */
+ /* 0x20c dll control register 2(byte 2) */
+ /* 0x210 dll control register 3(byte 3) */
+ /* 0x214 dll control register 4(byte 4) */
+ u32 dqtr0; /* 0x218 dq timing register */
+ u32 dqtr1; /* 0x21c dq timing register */
+ u32 dqtr2; /* 0x220 dq timing register */
+ u32 dqtr3; /* 0x224 dq timing register */
+ u32 dqstr; /* 0x228 dqs timing register */
+ u32 dqsbtr; /* 0x22c dqsb timing register */
+ u32 mcr; /* 0x230 mode configure register */
+ u8 res[0x8];
+ u32 ppwrsctl; /* 0x23c pad power save control */
+ u32 apr; /* 0x240 arbiter period register */
+ u32 pldtr; /* 0x244 priority level data threshold reg */
+ u8 res5[0x8];
+ u32 hpcr[32]; /* 0x250 host port configure register */
+ u8 res6[0x10];
+ u32 csel; /* 0x2e0 controller select register */
+};
+
+struct dram_para {
+ u32 clock;
+ u32 type;
+ u32 rank_num;
+ u32 density;
+ u32 io_width;
+ u32 bus_width;
+ u32 cas;
+ u32 zq;
+ u32 odt_en;
+ u32 size;
+ u32 tpr0;
+ u32 tpr1;
+ u32 tpr2;
+ u32 tpr3;
+ u32 tpr4;
+ u32 tpr5;
+ u32 emr1;
+ u32 emr2;
+ u32 emr3;
+};
+
+#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
+#define DRAM_CCR_DQS_GATE (0x1 << 14)
+#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
+#define DRAM_CCR_ITM_OFF (0x1 << 28)
+#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
+#define DRAM_CCR_INIT (0x1 << 31)
+
+#define DRAM_MEMORY_TYPE_DDR1 1
+#define DRAM_MEMORY_TYPE_DDR2 2
+#define DRAM_MEMORY_TYPE_DDR3 3
+#define DRAM_MEMORY_TYPE_LPDDR2 4
+#define DRAM_MEMORY_TYPE_LPDDR 5
+#define DRAM_DCR_TYPE (0x1 << 0)
+#define DRAM_DCR_TYPE_DDR2 0x0
+#define DRAM_DCR_TYPE_DDR3 0x1
+#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
+#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
+#define DRAM_DCR_IO_WIDTH_8BIT 0x0
+#define DRAM_DCR_IO_WIDTH_16BIT 0x1
+#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
+#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
+#define DRAM_DCR_CHIP_DENSITY_256M 0x0
+#define DRAM_DCR_CHIP_DENSITY_512M 0x1
+#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
+#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
+#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
+#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
+#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
+#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
+#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
+#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
+#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
+#define DRAM_DCR_NR_DLLCR_32BIT 5
+#define DRAM_DCR_NR_DLLCR_16BIT 3
+#define DRAM_DCR_NR_DLLCR_8BIT 2
+#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
+#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
+#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
+#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
+#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
+#define DRAM_DCR_MODE_SEQ 0x0
+#define DRAM_DCR_MODE_INTERLEAVE 0x1
+
+#define DRAM_CSR_FAILED (0x1 << 20)
+
+#define DRAM_DRR_TRFC(n) ((n) & 0xff)
+#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
+#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
+
+#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
+#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
+#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
+#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
+#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
+#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
+#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
+#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
+#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
+#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
+#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
+#define DRAM_MCR_RESET (0x1 << 12)
+#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
+#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
+#define DRAM_MCR_DCLK_OUT (0x1 << 16)
+
+#define DRAM_DLLCR_NRESET (0x1 << 30)
+#define DRAM_DLLCR_DISABLE (0x1 << 31)
+
+#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
+#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
+
+#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0)
+#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3)
+
+#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
+#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
+#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
+#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
+#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
+#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
+#define DRAM_MR_POWER_DOWN (0x1 << 12)
+
+#define DRAM_CSEL_MAGIC 0x16237495
+
+unsigned long sunxi_dram_init(void);
+unsigned long dramc_init(struct dram_para *para);
+
+#endif /* _SUNXI_DRAM_H */
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
new file mode 100644
index 0000000..892479c
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_GPIO_H
+#define _SUNXI_GPIO_H
+
+#include <linux/types.h>
+
+/*
+ * sunxi has 9 banks of gpio, they are:
+ * PA0 - PA17 | PB0 - PB23 | PC0 - PC24
+ * PD0 - PD27 | PE0 - PE31 | PF0 - PF5
+ * PG0 - PG9 | PH0 - PH27 | PI0 - PI12
+ */
+
+#define SUNXI_GPIO_A 0
+#define SUNXI_GPIO_B 1
+#define SUNXI_GPIO_C 2
+#define SUNXI_GPIO_D 3
+#define SUNXI_GPIO_E 4
+#define SUNXI_GPIO_F 5
+#define SUNXI_GPIO_G 6
+#define SUNXI_GPIO_H 7
+#define SUNXI_GPIO_I 8
+#define SUNXI_GPIO_BANKS 9
+
+struct sunxi_gpio {
+ u32 cfg[4];
+ u32 dat;
+ u32 drv[2];
+ u32 pull[2];
+};
+
+/* gpio interrupt control */
+struct sunxi_gpio_int {
+ u32 cfg[3];
+ u32 ctl;
+ u32 sta;
+ u32 deb; /* interrupt debounce */
+};
+
+struct sunxi_gpio_reg {
+ struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS];
+ u8 res[0xbc];
+ struct sunxi_gpio_int gpio_int;
+};
+
+#define BANK_TO_GPIO(bank) \
+ &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]
+
+#define GPIO_BANK(pin) ((pin) >> 5)
+#define GPIO_NUM(pin) ((pin) & 0x1f)
+
+#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3)
+#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2)
+
+#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4)
+#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
+
+#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4)
+#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
+
+/* GPIO bank sizes */
+#define SUNXI_GPIO_A_NR 32
+#define SUNXI_GPIO_B_NR 32
+#define SUNXI_GPIO_C_NR 32
+#define SUNXI_GPIO_D_NR 32
+#define SUNXI_GPIO_E_NR 32
+#define SUNXI_GPIO_F_NR 32
+#define SUNXI_GPIO_G_NR 32
+#define SUNXI_GPIO_H_NR 32
+#define SUNXI_GPIO_I_NR 32
+
+#define SUNXI_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + 0)
+
+enum sunxi_gpio_number {
+ SUNXI_GPIO_A_START = 0,
+ SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
+ SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
+ SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
+ SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
+ SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
+ SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
+ SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
+ SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+};
+
+/* SUNXI GPIO number definitions */
+#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr))
+#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr))
+#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr))
+#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr))
+#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr))
+#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr))
+#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr))
+#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr))
+#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr))
+
+/* GPIO pin function config */
+#define SUNXI_GPIO_INPUT 0
+#define SUNXI_GPIO_OUTPUT 1
+
+#define SUNXI_GPA0_EMAC 2
+#define SUN7I_GPA0_GMAC 5
+
+#define SUNXI_GPB0_TWI0 2
+
+#define SUN4I_GPB22_UART0_TX 2
+#define SUN4I_GPB23_UART0_RX 2
+
+#define SUN5I_GPB19_UART0_TX 2
+#define SUN5I_GPB20_UART0_RX 2
+
+#define SUN5I_GPG3_UART1_TX 4
+#define SUN5I_GPG4_UART1_RX 4
+
+#define SUNXI_GPC6_SDC2 3
+
+#define SUNXI_GPF0_SDC0 2
+
+#define SUNXI_GPF2_SDC0 2
+#define SUNXI_GPF2_UART0_TX 4
+#define SUNXI_GPF4_UART0_RX 4
+
+#define SUN4I_GPG0_SDC1 4
+
+#define SUN4I_GPH22_SDC1 5
+
+#define SUN4I_GPI4_SDC3 2
+
+/* GPIO pin pull-up/down config */
+#define SUNXI_GPIO_PULL_DISABLE 0
+#define SUNXI_GPIO_PULL_UP 1
+#define SUNXI_GPIO_PULL_DOWN 2
+
+int sunxi_gpio_set_cfgpin(u32 pin, u32 val);
+int sunxi_gpio_get_cfgpin(u32 pin);
+int sunxi_gpio_set_drv(u32 pin, u32 val);
+int sunxi_gpio_set_pull(u32 pin, u32 val);
+
+#endif /* _SUNXI_GPIO_H */
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
new file mode 100644
index 0000000..53196e3
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Aaron <leafy.myeh@allwinnertech.com>
+ *
+ * MMC register definition for allwinner sunxi platform.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_MMC_H
+#define _SUNXI_MMC_H
+
+#include <linux/types.h>
+
+struct sunxi_mmc {
+ u32 gctrl; /* 0x00 global control */
+ u32 clkcr; /* 0x04 clock control */
+ u32 timeout; /* 0x08 time out */
+ u32 width; /* 0x0c bus width */
+ u32 blksz; /* 0x10 block size */
+ u32 bytecnt; /* 0x14 byte count */
+ u32 cmd; /* 0x18 command */
+ u32 arg; /* 0x1c argument */
+ u32 resp0; /* 0x20 response 0 */
+ u32 resp1; /* 0x24 response 1 */
+ u32 resp2; /* 0x28 response 2 */
+ u32 resp3; /* 0x2c response 3 */
+ u32 imask; /* 0x30 interrupt mask */
+ u32 mint; /* 0x34 masked interrupt status */
+ u32 rint; /* 0x38 raw interrupt status */
+ u32 status; /* 0x3c status */
+ u32 ftrglevel; /* 0x40 FIFO threshold watermark*/
+ u32 funcsel; /* 0x44 function select */
+ u32 cbcr; /* 0x48 CIU byte count */
+ u32 bbcr; /* 0x4c BIU byte count */
+ u32 dbgc; /* 0x50 debug enable */
+ u32 res0[11];
+ u32 dmac; /* 0x80 internal DMA control */
+ u32 dlba; /* 0x84 internal DMA descr list base address */
+ u32 idst; /* 0x88 internal DMA status */
+ u32 idie; /* 0x8c internal DMA interrupt enable */
+ u32 chda; /* 0x90 */
+ u32 cbda; /* 0x94 */
+ u32 res1[26];
+ u32 fifo; /* 0x100 FIFO access address */
+};
+
+#define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17)
+#define SUNXI_MMC_CLK_ENABLE (0x1 << 16)
+#define SUNXI_MMC_CLK_DIVIDER_MASK (0xff)
+
+#define SUNXI_MMC_GCTRL_SOFT_RESET (0x1 << 0)
+#define SUNXI_MMC_GCTRL_FIFO_RESET (0x1 << 1)
+#define SUNXI_MMC_GCTRL_DMA_RESET (0x1 << 2)
+#define SUNXI_MMC_GCTRL_RESET (SUNXI_MMC_GCTRL_SOFT_RESET|\
+ SUNXI_MMC_GCTRL_FIFO_RESET|\
+ SUNXI_MMC_GCTRL_DMA_RESET)
+#define SUNXI_MMC_GCTRL_DMA_ENABLE (0x1 << 5)
+#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB (0x1 << 31)
+
+#define SUNXI_MMC_CMD_RESP_EXPIRE (0x1 << 6)
+#define SUNXI_MMC_CMD_LONG_RESPONSE (0x1 << 7)
+#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC (0x1 << 8)
+#define SUNXI_MMC_CMD_DATA_EXPIRE (0x1 << 9)
+#define SUNXI_MMC_CMD_WRITE (0x1 << 10)
+#define SUNXI_MMC_CMD_AUTO_STOP (0x1 << 12)
+#define SUNXI_MMC_CMD_WAIT_PRE_OVER (0x1 << 13)
+#define SUNXI_MMC_CMD_SEND_INIT_SEQ (0x1 << 15)
+#define SUNXI_MMC_CMD_UPCLK_ONLY (0x1 << 21)
+#define SUNXI_MMC_CMD_START (0x1 << 31)
+
+#define SUNXI_MMC_RINT_RESP_ERROR (0x1 << 1)
+#define SUNXI_MMC_RINT_COMMAND_DONE (0x1 << 2)
+#define SUNXI_MMC_RINT_DATA_OVER (0x1 << 3)
+#define SUNXI_MMC_RINT_TX_DATA_REQUEST (0x1 << 4)
+#define SUNXI_MMC_RINT_RX_DATA_REQUEST (0x1 << 5)
+#define SUNXI_MMC_RINT_RESP_CRC_ERROR (0x1 << 6)
+#define SUNXI_MMC_RINT_DATA_CRC_ERROR (0x1 << 7)
+#define SUNXI_MMC_RINT_RESP_TIMEOUT (0x1 << 8)
+#define SUNXI_MMC_RINT_DATA_TIMEOUT (0x1 << 9)
+#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE (0x1 << 10)
+#define SUNXI_MMC_RINT_FIFO_RUN_ERROR (0x1 << 11)
+#define SUNXI_MMC_RINT_HARD_WARE_LOCKED (0x1 << 12)
+#define SUNXI_MMC_RINT_START_BIT_ERROR (0x1 << 13)
+#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE (0x1 << 14)
+#define SUNXI_MMC_RINT_END_BIT_ERROR (0x1 << 15)
+#define SUNXI_MMC_RINT_SDIO_INTERRUPT (0x1 << 16)
+#define SUNXI_MMC_RINT_CARD_INSERT (0x1 << 30)
+#define SUNXI_MMC_RINT_CARD_REMOVE (0x1 << 31)
+#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT \
+ (SUNXI_MMC_RINT_RESP_ERROR | \
+ SUNXI_MMC_RINT_RESP_CRC_ERROR | \
+ SUNXI_MMC_RINT_DATA_CRC_ERROR | \
+ SUNXI_MMC_RINT_RESP_TIMEOUT | \
+ SUNXI_MMC_RINT_DATA_TIMEOUT | \
+ SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE | \
+ SUNXI_MMC_RINT_FIFO_RUN_ERROR | \
+ SUNXI_MMC_RINT_HARD_WARE_LOCKED | \
+ SUNXI_MMC_RINT_START_BIT_ERROR | \
+ SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */
+#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT \
+ (SUNXI_MMC_RINT_AUTO_COMMAND_DONE | \
+ SUNXI_MMC_RINT_DATA_OVER | \
+ SUNXI_MMC_RINT_COMMAND_DONE | \
+ SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
+
+#define SUNXI_MMC_STATUS_RXWL_FLAG (0x1 << 0)
+#define SUNXI_MMC_STATUS_TXWL_FLAG (0x1 << 1)
+#define SUNXI_MMC_STATUS_FIFO_EMPTY (0x1 << 2)
+#define SUNXI_MMC_STATUS_FIFO_FULL (0x1 << 3)
+#define SUNXI_MMC_STATUS_CARD_PRESENT (0x1 << 8)
+#define SUNXI_MMC_STATUS_CARD_DATA_BUSY (0x1 << 9)
+#define SUNXI_MMC_STATUS_DATA_FSM_BUSY (0x1 << 10)
+
+#define SUNXI_MMC_IDMAC_RESET (0x1 << 0)
+#define SUNXI_MMC_IDMAC_FIXBURST (0x1 << 1)
+#define SUNXI_MMC_IDMAC_ENABLE (0x1 << 7)
+
+#define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0)
+#define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1)
+
+int sunxi_mmc_init(int sdc_no);
+#endif /* _SUNXI_MMC_H */
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
new file mode 100644
index 0000000..ff871bc
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -0,0 +1,20 @@
+/*
+ * This is a copy of omap3/spl.h:
+ *
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_SPL_H_
+
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_NAND 2
+#define BOOT_DEVICE_ONE_NAND 3
+#define BOOT_DEVICE_MMC2 5 /*emmc*/
+#define BOOT_DEVICE_MMC1 6
+#define BOOT_DEVICE_XIPWAIT 7
+#define BOOT_DEVICE_MMC2_2 0xff
+#endif
diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
new file mode 100644
index 0000000..c3e636e
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
@@ -0,0 +1,16 @@
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <linux/types.h>
+
+void sdelay(unsigned long);
+
+#endif
diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
new file mode 100644
index 0000000..6aacfd7
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/timer.h
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Configuration settings for the Allwinner A10-evb board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_TIMER_H_
+#define _SUNXI_TIMER_H_
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* General purpose timer */
+struct sunxi_timer {
+ u32 ctl;
+ u32 inter;
+ u32 val;
+ u8 res[4];
+};
+
+/* Audio video sync*/
+struct sunxi_avs {
+ u32 ctl; /* 0x80 */
+ u32 cnt0; /* 0x84 */
+ u32 cnt1; /* 0x88 */
+ u32 div; /* 0x8c */
+};
+
+/* 64 bit counter */
+struct sunxi_64cnt {
+ u32 ctl; /* 0xa0 */
+ u32 lo; /* 0xa4 */
+ u32 hi; /* 0xa8 */
+};
+
+/* Watchdog */
+struct sunxi_wdog {
+ u32 ctl; /* 0x90 */
+ u32 mode; /* 0x94 */
+};
+
+/* Rtc */
+struct sunxi_rtc {
+ u32 ctl; /* 0x100 */
+ u32 yymmdd; /* 0x104 */
+ u32 hhmmss; /* 0x108 */
+};
+
+/* Alarm */
+struct sunxi_alarm {
+ u32 ddhhmmss; /* 0x10c */
+ u32 hhmmss; /* 0x110 */
+ u32 en; /* 0x114 */
+ u32 irqen; /* 0x118 */
+ u32 irqsta; /* 0x11c */
+};
+
+/* Timer general purpose register */
+struct sunxi_tgp {
+ u32 tgpd;
+};
+
+struct sunxi_timer_reg {
+ u32 tirqen; /* 0x00 */
+ u32 tirqsta; /* 0x04 */
+ u8 res1[8];
+ struct sunxi_timer timer[6]; /* We have 6 timers */
+ u8 res2[16];
+ struct sunxi_avs avs;
+ struct sunxi_wdog wdog;
+ u8 res3[8];
+ struct sunxi_64cnt cnt64;
+ u8 res4[0x58];
+ struct sunxi_rtc rtc;
+ struct sunxi_alarm alarm;
+ struct sunxi_tgp tgp[4];
+ u8 res5[8];
+ u32 cpu_cfg;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index c2f9761..0c28e1b 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -215,6 +215,7 @@
#define DDRMC_CR139_PHY_WRLV_EN(v) ((v) & 0xff)
#define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v) (((v) & 0x1f) << 27)
#define DDRMC_CR154_PAD_ZQ_MODE(v) (((v) & 0x3) << 21)
+#define DDRMC_CR154_DDR_SEL_PAD_CONTR(v) (((v) & 0x3) << 18)
#define DDRMC_CR155_AXI0_AWCACHE (1 << 10)
#define DDRMC_CR155_PAD_ODT_BYTE1(v) ((v) & 0x7)
#define DDRMC_CR158_TWR(v) ((v) & 0x3f)